#!/bin/bash
# turn tracing on with /bin/bash -x
#
# Check for translation work by checking out / updating from GIT, SVN and
# displaying the project name when your language.po has fuzzy strings or
# empty string messages. Also useful for translation of web pages.
#
# Filip Komar, 2012, 2013
# Remco Rijnders, 2012
# $Id: check_for_translation_work.sh 2013-11-30 21:31:00 UTC filip $
#
# Please see git for a list of changes to this script.
#
# More information about this script is in README file.

if [ -f ~/.mageia-i18n-config ]; then
    source ~/.mageia-i18n-config
else
    cat > ~/.mageia-i18n-config << "EOF"
# Please change the below values to match your needs:
language_code=xx

# Where to put the files from repositories and your working directory,
# please make sure those directories exist before running the script!!!
svn_directory="/home/user/Mageia/i18n/svn"
git_directory="/home/user/Mageia/i18n/git" # added after git transition
working_translations_directory="/home/user/Mageia/i18n/translations"

# choose svn method:
# 1. anonymous (no commit access)
svn_method="svn://"

# 2. public ssh key svn access. Remember to upload it to identity!
# Otherwise it will prompt you for password everytime for every resource.
#svn_method="svn+ssh://"

# The following lines can be changed if you desire, but this is
# not needed to properly use this script.

# set checking syntax of po files with 1
check_po_syntax=1

# set copying of po files with 1
copying_po=1

# uncomment next line to exclude copying of desktop files
#copying_desktop_files=no

# uncomment next line to exclude work on software desktop files resources
#work_on_docs_and_tools=no

# uncomment next line to exclude work on software desktop files resources
#work_on_desktop_files=no

# uncomment next line to exclude work on unofficial software resources
#work_on_unofficial=no

# uncomment next line to exclude work on html software resources
#work_on_html_software_files=no

# uncomment next line to exclude all work on web pages translation
#work_on_web_pages_translation=no

# set copying of web page files with 1
copying_wp=1

# uncomment next line to exclude work on software resources for mageia 3
#work_on_mga3=no

# ADVANCED SETTINGS
# set checking syntax of pot files with 1
check_pot_syntax=0

# set copying options (-i: interactive, -v: verbose, -u: update, -r: recursive)
copy_options="-ivur"

# choose log filename
log_filename="updated_translations_in_git"
log_directory="$git_directory"
logfile="$git_directory/$log_filename"

# switch of logging by uncommenting the following line
#logfile="/dev/null"

# checkout whole website www.mageia.org and mognase navigation
checkout_whole_website=0

# set searching for new *.pot files in svn with 1
searching_for_new_pot_files_in_svn=0

# whether to look for new versions of the script and list of translatable resources
check_updates=1

# red color for differences from last time (green 32, blue 34)
color_for_differences=31

# uncomment next line to show log with differences from last run
#stop_showing_differences_from_last_run=yes

# uncomment next line to prevent creation of working copy of po file
#create_a_working_copy_of_po_file=no

EOF

    echo -e "\E[31m"
    echo "This script has not been configured yet for you. A template"
    echo "configuration file named .mageia-i18n-config has been made in your"
    echo "home directory. Please edit it according to your needs and remember"
    echo "to create apropriate directories before running this script again."
    echo
    echo "For more information about this script please read README file."
    echo -e "\E[m"
    exit 1
fi
if [ -z "$git_directory" ]; then
    echo -e "\E[31m"
    echo "Please first set git_directory variable in your configuration file"
    echo "named .mageia-i18n-config in your home directory before running"
    echo "this script again."
    echo -e "\E[m"
    exit 2
fi
if [ ! -f ~/.gitconfig ]; then
    cat > ~/.gitconfig << "EOF"
[user]
     name = Your Name
     email = your_email@example.com
[color]
     ui = true
[url "git://git.mageia.org/"]
     insteadof = mga:
[url "ssh://git@git.mageia.org/"]
     pushInsteadof = mga:
[alias]
     ci = commit
     up = pull --rebase
[push]
     default = matching
EOF
    echo "It seems that you didn't configured git yet" > "$log_directory"/list_of_resources_for_translation.txt
    echo "Please edit ~/.gitconfig See: https://wiki.mageia.org/en/Git_usage_for_l10n_and_doc" > "$log_directory"/list_of_resources_for_translation.txt
    echo -e "\E[31m"
    echo "It seems that you didn't configured git yet. A template configuration" | tee -a "$logfile"_this_run.log
    echo "file named ~/.gitconfig has been made in your home directory." | tee -a "$logfile"_this_run.log
    echo "Please edit it according to your needs. There is a guide in our wiki:" | tee -a "$logfile"_this_run.log
    echo "https://wiki.mageia.org/en/Git_usage_for_l10n_and_doc" | tee -a "$logfile"_this_run.log
    echo ""
    read -p "Please read information above and then press any key to continue... " -n1 -s
    echo -e "\E[m"
fi

# save pwd to saved_dir
saved_dir=$(pwd)

if [ -f "$logfile"_this_run.log ]; then
    mv "$logfile"_this_run.log "$logfile"_previous_run.log
fi
separator="-----------------------------------------------------"

# Check if directories exist and create them if not
if [ -z "$work_on_web_pages_translation" ]; then
    if [ ! -d "$svn_directory" ]; then
        mkdir -vp "$svn_directory/" # | tee -a "$logfile"_this_run.log
    fi
fi
if [ ! -d "$git_directory" ]; then
    mkdir -vp "$git_directory/" # | tee -a "$logfile"_this_run.log
fi
if [ ! -d "$working_translations_directory" ]; then
    mkdir -vp "$working_translations_directory/" | tee -a "$logfile"_this_run.log
fi

echo "" | tee -a "$logfile"_this_run.log
date | tee -a "$logfile"_this_run.log

# Check if a newer version of this script is available. If yes, show the changes.
if [ $check_updates -eq 1 ]; then
    if [ -f "$git_directory"/translation_projects.dat ]; then
        cp "$git_directory"/translation_projects.dat "$git_directory"/translation_projects.dat_previous
    fi
    wget -Nq http://gitweb.mageia.org/software/i18n/tools/plain/translation_projects.dat "$git_directory"/
    if [ -f "$git_directory"/check_for_translation_work.sh ]; then
        cp "$git_directory"/check_for_translation_work.sh "$git_directory"/check_for_translation_work.sh_previous
    fi
    wget -Nq http://gitweb.mageia.org/software/i18n/tools/plain/check_for_translation_work.sh "$git_directory"/
    if [ -f "$git_directory"/check_for_translation_work.sh_previous ]; then
        diff -q "$git_directory"/check_for_translation_work.sh "$git_directory"/check_for_translation_work.sh_previous > /dev/null
        if [ $? -eq 1 ]; then # there are differences
            echo -e "\E[33m"
            echo $separator | tee -a "$logfile"_this_run.log
            echo You are running an old revision of this script. You may consider updating. Changes are: | tee -a "$logfile"_this_run.log
            diff "$git_directory"/check_for_translation_work.sh "$git_directory"/check_for_translation_work.sh_previous | tee -a "$logfile".log
            echo -e "\E[m"
            echo "" | tee -a "$logfile"_this_run.log
        fi
    fi
    echo ""
fi

declare -A git_addresses
declare -A translate_projects_po
declare -A translate_projects_desktop
declare -A translate_projects_help
declare -A web_pages
if [ -f "$git_directory"/translation_projects.dat ]; then
    source "$git_directory/translation_projects.dat"
else
    echo -e "\E[31m"
    echo "Please set check_updates=1 in your configuration file first or copy"
    echo "translation_projects.dat into $git_directory/ before running this"
    echo "script again."
    echo -e "\E[m"
    exit 2
fi

echo "LIST OF RESOURCES WITH FUZZY OR EMPTY STRINGS (in $language_code language)" > "$log_directory"/list_of_resources_for_translation.txt

# clone / pull git repositories
echo -e "\E[32m"
echo "Clone / pull git repositories:" | tee -a "$logfile"_this_run.log
echo -e "\E[m"
for git_address in "${!git_addresses[@]}"
do
    echo $separator | tee -a "$logfile"_this_run.log
    if [ -d "$git_directory/$git_address" ]; then
        echo Pull git repository "${git_addresses[$git_address]}" to "$git_address". | tee -a "$logfile"_this_run.log
        cd "$git_directory/$git_address"
#       just echo $language_code.po or *.pot file line if they are updated
        git pull --stat --rebase -q | grep -E "$language_code.po\>|.pot\>|.desktop\>|.html\>" | tee -a "$logfile"_this_run.log
#       git diff --name-status ORIG_HEAD.. | grep -E "$language_code.po|[\.]pot"
    else
        echo Clone git repository "${git_addresses[$git_address]}" to "$git_address". | tee -a "$logfile"_this_run.log
        cd "$git_directory/"
#       echo "${git_addresses[$git_address]}" # debug
        git clone -q --single-branch mga:${git_addresses[$git_address]} $git_address | tee -a "$logfile"_this_run.log
#       cd "$git_directory/$git_address"
    fi

done
echo $separator | tee -a "$logfile"_this_run.log
echo "" | tee -a "$logfile"_this_run.log

echo -e "\E[32m"
echo "" >> "$log_directory"/list_of_resources_for_translation.txt
echo "Po and pot files:" | tee -a "$logfile"_this_run.log
echo "Translate po files in working (WD) or git directories:" >> "$log_directory"/list_of_resources_for_translation.txt
echo -e "\E[m"

# echo about checking the syntax of po file if required
if [ $check_po_syntax -eq 1 ]; then
    echo "Syntax of $language_code.po in git will be tested."
fi

# echo about copying the *.pot file and $language_code.po for editing in apropriate directory if required
if [ $copying_po -eq 1 ]; then
    echo "Files *.pot and $language_code.po will be copied into apropriate directory."
fi

i=1
for translate_project_name_po in "${!translate_projects_po[@]}"
do
    echo $separator | tee -a "$logfile"_this_run.log
    unexisted_po="no"
    translate_this="no"
    wip_po_filename=""
    statistics_git_po=""
    statistics_git_pot=""
    statistics_wd_po=""
    pot_filename="*.pot"
    echo "Working on $language_code.po file in working translations directory: $translate_project_name_po and local git directory: ${translate_projects_po[$translate_project_name_po]}." | tee -a "$logfile"_this_run.log
    if [ ! -d "$git_directory/${translate_projects_po[$translate_project_name_po]}/" ]; then
        echo "Directory $git_directory/${translate_projects_po[$translate_project_name_po]}/ doesn't exist."
        echo "It seems that something wen't wrong in git clone operation. Other operations in $translate_project_name_po will be aborted."
        echo "All operations in $translate_project_name_po was aborted! Check script output or logs." >> "$log_directory"/list_of_resources_for_translation.txt
        continue
    else
        cd "$git_directory/${translate_projects_po[$translate_project_name_po]}/" # $translate_project_name_po"
        pot_filename=`ls *.pot`
        wip_po_filename="$pot_filename"_$language_code.po
        if [ $? -ne 0 ]; then
            echo "Pot file not found in $git_directory/${translate_projects_po[$translate_project_name_po]}/. Please report that on our mailing list." | tee -a "$logfile"_this_run.log
        fi
    fi

# checking for fuzzy and untranslated strings in git $language_code.po
    if [ -f $language_code.po ]; then
        msgattrib $language_code.po --only-fuzzy --no-obsolete | grep . >> /dev/null
        if [ $? -eq 0 ]; then
            translate_this="yes"
        fi
        msgattrib $language_code.po --untranslated --no-obsolete | grep . >> /dev/null
        if [ $? -eq 0 ]; then
            translate_this="yes"
        fi
    else # $language_code.po not in git yet
        translate_this="yes"
    fi
#   creating statistics
    if [ -f $language_code.po ]; then
        statistics_git_po=`LC_ALL=C msgfmt --statistics --verbose $language_code.po -o /dev/null 2>&1  | tail -1`
    fi
    if [ -f $pot_filename ]; then
        statistics_git_pot=`LC_ALL=C msgfmt --statistics --verbose $pot_filename -o /dev/null 2>&1 | tail -1`
    fi

#   checking the syntax of po file from git if required
    if [ $check_po_syntax -eq 1 ]; then
        if [ -f $language_code.po ]; then
            msgfmt --statistics --verbose -c $language_code.po -o /dev/null 2>&1 | tee -a "$logfile"_this_run.log
        else # Automatic test is not possible.
            echo "File $language_code.po is not present yet in ${translate_projects_po[$translate_project_name_po]} for msgfmt test. Please translate it and commit & push it to git." | tee -a "$logfile"_this_run.log
            unexisted_po="yes"
        fi
#       checking the syntax of pot file from git if required
        if [ $check_pot_syntax -eq 1 ]; then
            if [ -f $pot_filename ]; then
                msgfmt -c $pot_filename -o /dev/null 2>&1 | tee -a "$logfile"_this_run.log
            else # Automatic test is not possible.
                echo "File *.pot is not present in ${translate_projects_po[$translate_project_name_po]}. Please report that on our mailing list." | tee -a "$logfile"_this_run.log
            fi
        fi
    fi

#   copying the *.pot file and $language_code.po for editing in working directory if required
    if [ $copying_po -eq 1 ]; then
        if [ ! -d "$working_translations_directory/$translate_project_name_po/" ]; then
            mkdir -vp "$working_translations_directory/$translate_project_name_po/" | tee -a "$logfile"_this_run.log
        fi
        if [ "$unexisted_po" != "yes" ]; then
#           testing for differences of *.po file from git and working copy
            if [ -f "$working_translations_directory/$translate_project_name_po/$language_code.po" ]; then
                diff -q "$git_directory/${translate_projects_po[$translate_project_name_po]}/"$language_code.po "$working_translations_directory/$translate_project_name_po/$language_code.po" | tee -a "$logfile"_this_run.log
            fi
            cp $copy_options $language_code.po "$working_translations_directory/$translate_project_name_po/" | tee -a "$logfile"_this_run.log
        else
#           echo "File $language_code.po is not present yet in ${translate_projects_po[$translate_project_name_po]}. Copying to working directory is not possible." | tee -a "$logfile"_this_run.log
            echo -n # nop
        fi
        if [ -f $pot_filename ]; then
#           testing for differences of *.pot file from git and working copy
            if [ -f "$working_translations_directory/$translate_project_name_po/$pot_filename" ]; then
                diff -q "$git_directory/${translate_projects_po[$translate_project_name_po]}/$pot_filename" "$working_translations_directory/$translate_project_name_po/$pot_filename" | tee -a "$logfile"_this_run.log
            fi
            cp $copy_options $pot_filename "$working_translations_directory/$translate_project_name_po/" | tee -a "$logfile"_this_run.log
            cd "$working_translations_directory/$translate_project_name_po/"
#           rm sl.po # debug
            if [ -f "$working_translations_directory/$translate_project_name_po/$wip_po_filename" ]; then
#               creating new_pot_lang.po from latest *.pot file
                msgmerge -q $wip_po_filename $pot_filename > new_pot_$language_code.po | tee -a "$logfile"_this_run.log # || rm new_pot_$language_code.po # msgmerge *.pot_lang.po *.pot > new_pot_lang.po
                if [ ${PIPESTATUS[0]} -ne 0 ]; then
                    msgfmt -c "$git_directory/${translate_projects_po[$translate_project_name_po]}/$pot_filename" -o /dev/null
                    if [ ${PIPESTATUS[0]} -ne 0 ]; then
                        echo Test with msgfmt -c discovered a problem with "$git_directory/${translate_projects_po[$translate_project_name_po]}/$pot_filename" file. | tee -a "$logfile"_this_run.log
                        echo Please report on our mailing list that msgfmt -c test has a problem with "$translate_project_name_po/$pot_filename" file. >> "$log_directory"/list_of_resources_for_translation.txt
                    fi
                    msgfmt -c "$git_directory/${translate_projects_po[$translate_project_name_po]}/"$language_code.po -o /dev/null
                    if [ ${PIPESTATUS[0]} -ne 0 ]; then
                        echo Test with msgfmt -c discovered a problem with "$git_directory/${translate_projects_po[$translate_project_name_po]}/"$language_code.po file. | tee -a "$logfile"_this_run.log
                        echo Test with msgfmt -c discovered a problem with $language_code.po file. Check script output or logs. >> "$log_directory"/list_of_resources_for_translation.txt
                    fi
                    rm new_pot_$language_code.po # remove it as it's no good anyway
                fi
#               comparing new_pot_lang.po from working copy
                if [ -f new_pot_$language_code.po ]; then
                    statistics_wd_po=`LC_ALL=C msgfmt --statistics --verbose new_pot_$language_code.po -o /dev/null 2>&1 | tail -1`
#                   checking for fuzzy and untranslated strings in fresh new_pot_$language_code.po
                    msgattrib new_pot_$language_code.po --only-fuzzy --no-obsolete 2>&1 | grep . >> /dev/null
                    if [ $? -eq 0 ]; then
                        translate_this="yes"
                    fi
                    msgattrib new_pot_$language_code.po --untranslated --no-obsolete 2>&1 | grep . >> /dev/null
                    if [ $? -eq 0 ]; then
                        translate_this="yes"
                    fi
                    diff -q $wip_po_filename new_pot_$language_code.po >> /dev/null #| tee -a "$logfile"_this_run.log
#                   diff -q $language_code.po new_pot_$language_code.po | tee -a "$logfile"_this_run.log
                    diff_exit_status_1=${PIPESTATUS[0]} # this reads and remembers exit status of first command in pipe (diff in this case)
#                   if [ $? -eq 0 ]; then
                    if [ $diff_exit_status_1 -eq 0 ]; then # no differences
                        rm new_pot_$language_code.po # remove resulting file
#                       echo There are no differences between $wip_po_filename and new_pot_$language_code.po. # debug
                    else
                        if [ $diff_exit_status_1 -eq 1 ]; then # there are differences
                            echo Replace existing file $wip_po_filename with new_pot_$language_code.po in working directory $translate_project_name_po since they differ. | tee -a "$logfile"_this_run.log
                        else
                            echo There was an error in diff between $wip_po_filename and new_pot_$language_code.po in working directory $translate_project_name_po.
                        fi
                    fi
                else
#                   echo There is no new_pot_$language_code.po. # debug
                    echo -n # nop
                fi
#               comparing git lang.po from working copy lang.po
                if [ -f $language_code.po ]; then
                    diff -q $wip_po_filename $language_code.po | tee -a "$logfile"_this_run.log
                    diff_exit_status_2=${PIPESTATUS[0]} # this reads and remembers exit status of first command in pipe (diff in this case)
#                   if [ $? -eq 0 ]; then
                    if [ $diff_exit_status_2 -eq 1 ]; then # there are differences
                        echo New commit will be needed when the file $wip_po_filename will be ready in working directory $translate_project_name_po. | tee -a "$logfile"_this_run.log
                    else
                        if [ $diff_exit_status_2 -eq 2 ]; then # there was an error
                            echo There was an error in diff between file $wip_po_filename and $language_code.po in working directory $translate_project_name_po.
                        fi
                    fi
                fi
            else
                if [ "$unexisted_po" != "yes" ]; then
                    echo "File $wip_po_filename is not present in working directory $translate_project_name_po. Comparing is not possible." | tee -a "$logfile"_this_run.log
                fi
                if [ -z "$create_a_working_copy_of_po_file" ]; then
                    if [ "$unexisted_po" != "yes" ]; then
                        cp $copy_options $language_code.po $wip_po_filename | tee -a "$logfile"_this_run.log
                        echo "File $language_code.po in working directory $translate_project_name_po copied to $wip_po_filename." | tee -a "$logfile"_this_run.log
                    else
                        cp $copy_options $pot_filename $wip_po_filename | tee -a "$logfile"_this_run.log
                        echo "Template file $pot_filename in working directory $translate_project_name_po copied to $wip_po_filename." | tee -a "$logfile"_this_run.log
                    fi
                fi
            fi
        else
            echo "File $pot_filename is not present in ${translate_projects_po[$translate_project_name_po]}. Copying is not possible." | tee -a "$logfile"_this_run.log
        fi
#       echo "Files *.pot and $language_code.po copied into $working_translations_directory/$translate_project_name_po/."
    fi
    if [ -n "$statistics_wd_po" ]; then
        statistics_po=$statistics_wd_po
    else
        statistics_po=$statistics_git_po
    fi
    if [ -n "$statistics_po" ]; then
        statistics=$statistics_po
    else
        statistics=$statistics_git_pot
    fi
    if [ "$translate_this" = "yes" ]; then
        echo " $i. $translate_project_name_po, $statistics" >> "$log_directory"/list_of_resources_for_translation.txt
        echo "    git: $git_directory/${translate_projects_po[$translate_project_name_po]}/$language_code.po" >> "$log_directory"/list_of_resources_for_translation.txt
        if [ $copying_po -eq 1 ]; then
            echo "    WD: $working_translations_directory/$translate_project_name_po/$language_code.po" >> "$log_directory"/list_of_resources_for_translation.txt
        fi
        empty_list_of_desktop_file="no"
        let i++
    fi
#    cd "$git_directory/"
#    echo "" | tee -a "$logfile"_this_run.log
done
echo "" | tee -a "$logfile"_this_run.log

echo -e "\E[32m"
echo "" >> "$log_directory"/list_of_resources_for_translation.txt
echo "*.desktop files:" | tee -a "$logfile"_this_run.log
echo "Translate *.desktop files in working (WD) or git directories:" >> "$log_directory"/list_of_resources_for_translation.txt
echo -e "\E[m"
empty_list_of_desktop_file=""
i=1
for translate_project_name_desktop in "${!translate_projects_desktop[@]}"
do
    if [ ! -f "$git_directory/${translate_projects_desktop[$translate_project_name_desktop]}" ]; then
        echo "File $git_directory/${translate_projects_desktop[$translate_project_name_desktop]} doesn't exist."
        echo "It seems that something wen't wrong in git clone operation. Other operations in $translate_project_name_desktop will be aborted."
        echo "All operations in $translate_project_name_desktop was aborted! Check script output or logs." >> "$log_directory"/list_of_resources_for_translation.txt
        continue
    fi
    echo $separator | tee -a "$logfile"_this_run.log
    copy_this_desktop_file="no"
    untranslated_name="Name, "
    untranslated_comment="Comment,"
    untranslated_generic_name="GenericName, "
    names_and_comments=""
    echo "Working on *.desktop file in working translations directory: $translate_project_name_desktop and local git directory: ${translate_projects_desktop[$translate_project_name_desktop]}." | tee -a "$logfile"_this_run.log
#   cd "$git_directory/${translate_projects_desktop[$translate_project_name_desktop]}/" # $translate_project_name_desktop"
    names_and_comments=`cat "$git_directory/${translate_projects_desktop[$translate_project_name_desktop]}" #| grep -E "^Name=|^Name\[$language_code\]=|^Comment=|^Comment\[$language_code\]="`
#   echo names_and_comments: "$names_and_comments" # debug
    eng_name=`echo "$names_and_comments" | grep -E "^Name=" | sed 's/^Name=//'`
    lang_name=`echo "$names_and_comments" | grep -E "^Name\[$language_code\]=" | sed 's/^Name\['$language_code'\]=//'`
    eng_comment=`echo "$names_and_comments" | grep -E "^Comment=" | sed 's/^Comment=//'`
    lang_comment=`echo "$names_and_comments" | grep -E "^Comment\[$language_code\]=" | sed 's/^Comment\['$language_code'\]=//'`
    eng_generic_name=`echo "$names_and_comments" | grep -E "^GenericName=" | sed 's/^GenericName=//'`
    lang_generic_name=`echo "$names_and_comments" | grep -E "^GenericName\[$language_code\]=" | sed 's/^GenericName\['$language_code'\]=//'`

    if [ -n "$eng_name" ]; then # Name string present in original desktop file
        if [ -n "$lang_name" ]; then # Name string present in your language
            if [ "$lang_name" != "$eng_name" ]; then # both strings differ
#               echo Name string \"$eng_name\" present in $language_code language: \"$lang_name\" # debug
#               echo -n # nop
                untranslated_name=""
            else # both strings are equal
                copy_this_desktop_file="yes"
                echo Name string \"$eng_name\" in $language_code language present but untranslated | tee -a "$logfile"_this_run.log
            fi
        else # Name string not present in your language
            copy_this_desktop_file="yes"
            echo Name string \"$eng_name\" not present in $language_code language | tee -a "$logfile"_this_run.log
        fi
    else
        untranslated_name=""
    fi
    if [ -n "$eng_comment" ]; then # Comment string present in original desktop file
        if [ -n "$lang_comment" ]; then # Comment string present in your language
            if [ "$lang_comment" != "$eng_comment" ]; then # both strings differ
#                echo Comment string \"$eng_comment\" in $language_code language present: \"$lang_comment\" # debug
#                echo -n # nop
                untranslated_comment=""
            else # both strings are equal
                copy_this_desktop_file="yes"
                echo Comment string \"$eng_comment\" in $language_code language present but untranslated | tee -a "$logfile"_this_run.log
            fi
        else # Comment string not present in your language
            copy_this_desktop_file="yes"
            echo Comment string \"$eng_comment\" not present in $language_code language | tee -a "$logfile"_this_run.log
        fi
    else
        untranslated_comment=""
    fi
    if [ -n "$eng_generic_name" ]; then # GenericName string present in original desktop file
        if [ -n "$lang_generic_name" ]; then # GenericName string present in your language
            if [ "$lang_generic_name" != "$eng_generic_name" ]; then # both strings differ
#                echo GenericName string \"$eng_generic_name\" in $language_code language present: \"$lang_generic_name\" # debug
#                echo -n # nop
                untranslated_generic_name=""
            else # both strings are equal
                copy_this_desktop_file="yes"
                echo GenericName string \"$eng_generic_name\" in $language_code language present but untranslated | tee -a "$logfile"_this_run.log
            fi
        else # GenericName string not present in your language
            copy_this_desktop_file="yes"
            echo GenericName string \"$eng_generic_name\" not present in $language_code language | tee -a "$logfile"_this_run.log
        fi
    else
        untranslated_generic_name=""
    fi

#   copying the *.desktop file for editing in working directory if required
    if [ -z $copying_desktop_files ]; then
        if [ "$copy_this_desktop_file" = "yes" ]; then
            if [ ! -d "$working_translations_directory/desktop/$translate_project_name_desktop/" ]; then
                mkdir -vp "$working_translations_directory/desktop/$translate_project_name_desktop/" | tee -a "$logfile"_this_run.log
            fi
            cp $copy_options "$git_directory/${translate_projects_desktop[$translate_project_name_desktop]}" "$working_translations_directory/desktop/$translate_project_name_desktop/" | tee -a "$logfile"_this_run.log
        fi
    fi
    if [ "$copy_this_desktop_file" = "yes" ]; then
        echo " $i. $translate_project_name_desktop, untranslated line: $untranslated_name $untranslated_comment $untranslated_generic_name" >> "$log_directory"/list_of_resources_for_translation.txt
        echo "    git: $git_directory/${translate_projects_desktop[$translate_project_name_desktop]}" >> "$log_directory"/list_of_resources_for_translation.txt
        if [ -z $copying_desktop_files ]; then
            echo "     WD: $working_translations_directory/desktop/$translate_project_name_desktop/" >> "$log_directory"/list_of_resources_for_translation.txt
        fi
        empty_list_of_desktop_file="no"
        let i++
    fi
done
if [ -n "$work_on_desktop_files" ]; then
    echo Your configuration exclude work on desktop files >> "$log_directory"/list_of_resources_for_translation.txt
else
    if [ -z "$empty_list_of_desktop_file" ]; then
        echo Congratulations. All desktop files are translated in $language_code language. >> "$log_directory"/list_of_resources_for_translation.txt
    fi
fi

if [ -z "$work_on_web_pages_translation" ]; then
#   Check out / update web_page files
    echo -e "\E[32m"
    echo "Check out / update web page files:" | tee -a "$logfile"_this_run.log
    echo "" >> "$log_directory"/list_of_resources_for_translation.txt
    echo "Please check http://www.mageia.org/langs/report.php for details about translation of web page files in $language_code language." >> "$log_directory"/list_of_resources_for_translation.txt
    echo -e "\E[m"
    for web_page_name in "${!web_pages[@]}"
    do
        echo $separator | tee -a "$logfile"_this_run.log
        echo Working on: "$web_page_name" from "${web_pages[$web_page_name]}". | tee -a "$logfile"_this_run.log # \'
        if [ -d "$svn_directory/$web_page_name/" ]; then
            cd "$svn_directory/$web_page_name/"
#           just echo $language_code.lang or *.php file line if they are updated
            svn up | grep -E "$language_code.lang|en.lang|.php" | tee -a "$logfile"_this_run.log
#           echo -n "" # debug
        else
            cd "$svn_directory/"
#           just echo $language_code.lang or *.php file line if they are updated
            svn co $svn_method${web_pages[$web_page_name]} $web_page_name | grep -E "$language_code.lang|en.lang|.php" | tee -a "$logfile"_this_run.log
            echo -n "" | tee -a "$logfile"_this_run.log
            cd "$svn_directory/$web_page_name/"
        fi
#       echo "" | tee -a "$logfile"_this_run.log
    done


#   copying the english files and $language_code.lang files for editing in working directory if required
    if [ $copying_wp -eq 1 ]; then
        echo $separator | tee -a "$logfile"_this_run.log
        echo -e "\E[32m"
        echo "Web files will be copied (updated) into working translations directory."
        echo -e "\E[m"
        cd "$svn_directory/"

        if [ ! -d "$working_translations_directory/web_pages_lang/en/" ]; then
            mkdir -vp "$working_translations_directory/web_pages_lang/en/" | tee -a "$logfile"_this_run.log
        fi
        cp $copy_options ./web_pages_lang/en/* "$working_translations_directory/web_pages_lang/en/" | tee -a "$logfile"_this_run.log
        if [ ! -d "$working_translations_directory/web_pages_lang/$language_code/" ]; then
            mkdir -vp "$working_translations_directory/web_pages_lang/$language_code/" | tee -a "$logfile"_this_run.log
        fi
        cp $copy_options ./web_pages_lang/$language_code/* "$working_translations_directory/web_pages_lang/$language_code/" | tee -a "$logfile"_this_run.log
        if [ ! -d "$working_translations_directory/web_page_navigation/" ]; then
            mkdir -vp "$working_translations_directory/web_page_navigation/" | tee -a "$logfile"_this_run.log
        fi
        cp $copy_options ./web_page_navigation/en.lang "$working_translations_directory/web_page_navigation/" | tee -a "$logfile"_this_run.log
        cp $copy_options ./web_page_navigation/$language_code.lang "$working_translations_directory/web_page_navigation/" | tee -a "$logfile"_this_run.log
    fi

    if [ -d "$svn_directory/web_page_navigation/" ]; then
        if [ -d "$svn_directory/web_page_navigation_2/" ]; then
            diff -rq "$svn_directory/web_page_navigation" "$svn_directory/web_page_navigation_2" | grep -E ".lang" | tee -a "$logfile"_this_run.log
        else
            echo "Both navigation directories ($svn_directory/web_page_navigation and $svn_directory/web_page_navigation_2) are not present. Comparing is not possible." | tee -a "$logfile"_this_run.log
        fi
    else
        echo "Both navigation directories ($svn_directory/web_page_navigation and $svn_directory/web_page_navigation_2) are not present. Comparing is not possible." | tee -a "$logfile"_this_run.log
    fi
    echo "" | tee -a "$logfile"_this_run.log
fi

cd "$git_directory/"
##################################### TODO START change searching for new *.pot files and other resources in git
if [ $searching_for_new_pot_files_in_svn -eq 1 ]; then
    if [ "when_this_works_on_git" = "true" ]; then
        echo $separator | tee -a "$logfile"_this_run.log
        echo -e "\E[32m"
        echo "Searching for new *.pot files in svn." | tee -a "$logfile"_this_run.log
        echo -e "\E[m"
        if [ -f "$log_directory"/new_svn_list_of_pot_files ]; then
            mv "$log_directory"/new_svn_list_of_pot_files "$log_directory"/old_svn_list_of_pot_files # -f
        fi
        svn list -R svn://svn.mageia.org/svn/soft/ > "$log_directory"/svn_list
        cat "$log_directory"/svn_list | grep [\.]pot > "$log_directory"/new_svn_list_of_pot_files
#       svn list -R svn://svn.mageia.org/svn/soft/ | grep [\.]pot > new_svn_list_of_pot_files
        if [ -f "$log_directory"/old_svn_list_of_pot_files ]; then
            diff new_svn_list_of_pot_files old_svn_list_of_pot_files | tee -a "$logfile"_this_run.log
            if [ ${PIPESTATUS[0]} -eq 0 ]; then # this reads exit status of first command in pipe
                echo "No new *.pot files found." | tee -a "$logfile"_this_run.log
            fi
        fi
        echo "" | tee -a "$logfile"_this_run.log
    fi
fi
##################################### TODO END

# append this_run_log to full_log
cat "$logfile"_this_run.log >> "$logfile"_full.log
echo "" | tee -a "$logfile".log
echo $separator | tee -a "$logfile".log

if [ -z "$stop_showing_differences_from_last_run" ]; then
    if [ -f "$logfile"_previous_run.log ]; then
#       show only differences and log them
        echo -e "\E[32m"
        echo "Differences from last run:" | tee -a "$logfile".log
        echo -e "\E[m"
        echo -e "\E["$color_for_differences"m"
        diff "$logfile"_this_run.log "$logfile"_previous_run.log | tee -a "$logfile".log
        echo -e "\E[m"
    fi
fi

echo $separator
echo -e "\E[33m"
# echo "List of resources for translation:"
cat "$log_directory"/list_of_resources_for_translation.txt
echo -e "\E[m"

# if you use this script by click it in GUI uncomment the next line
#read -p "Press any key to continue... " -n1 -s

# restore saved_dir
cd "$saved_dir"
# pwd
# set -x # turn debug tracing on with set -x
# set +x # turn debug tracing off with set +x
exit 0