From de114301dce6b93896f477237619803d46295b86 Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Thu, 27 Jun 2019 17:47:29 +0300 Subject: Sync with Tx --- docs/docs/stable/installer/zh_CN.po | 2396 +++-------------------------------- 1 file changed, 189 insertions(+), 2207 deletions(-) (limited to 'docs/docs/stable/installer/zh_CN.po') diff --git a/docs/docs/stable/installer/zh_CN.po b/docs/docs/stable/installer/zh_CN.po index 2461ddbe..ceca35a7 100644 --- a/docs/docs/stable/installer/zh_CN.po +++ b/docs/docs/stable/installer/zh_CN.po @@ -4,19 +4,19 @@ # # Translators: # 吴善俊 , 2013 -# Xiaobo Zhou , 2014 -# Xiaobo Zhou , 2014 +# Cally Mal , 2014 +# Cally Mal , 2014 # xiao wenming , 2015 # Yuri Chornoivan , 2016 # zwpwjwtz , 2016-2017 # 吴善俊 , 2013 -# Xiaobo Zhou , 2014 +# Cally Mal , 2014 msgid "" msgstr "" "Project-Id-Version: Mageia\n" "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n" "POT-Creation-Date: 2019-01-19 21:23+0200\n" -"PO-Revision-Date: 2017-05-21 06:29+0000\n" +"PO-Revision-Date: 2019-01-19 19:25+0000\n" "Last-Translator: zwpwjwtz \n" "Language-Team: Chinese (China) (http://www.transifex.com/MageiaLinux/mageia/" "language/zh_CN/)\n" @@ -33,7 +33,6 @@ msgstr "许可证和发行说明" #. type: Content of:
#: en/acceptLicense.xml:35 -#, fuzzy msgid "" " " msgstr "" -" " #. type: Content of:
#: en/acceptLicense.xml:46 @@ -54,44 +48,32 @@ msgstr "许可协议" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:51 -#, fuzzy msgid "" "Before installing Mageia, please read the license terms and conditions " "carefully." msgstr "" -"在安装 <application>Mageia</application> 之前，请先仔细阅读许可条款和许可条" -"件。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:56 -#, fuzzy msgid "" "These terms and conditions apply to the entire Mageia distribution and must " "be accepted before you can continue." msgstr "" -"这些许可条款和许可条件适用于整个 <application>Mageia</application> 发行版，你" -"必须予以接受才能继续安装。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/acceptLicense.xml:61 -#, fuzzy msgid "" "To proceed, simply select <emphasis>Accept</emphasis> and then click on " "<emphasis>Next</emphasis>" msgstr "" -"要接受, 只要选择 <guilabel>接受</guilabel> 后点击 <guibutton>下一步</" -"guibutton>." #. type: Content of: <section><section><para> #: en/acceptLicense.xml:66 -#, fuzzy msgid "" "If you decide not to accept these conditions, then we thank you for your " "interest in Mageia. Clicking <emphasis>Quit</emphasis> will reboot your " "computer." msgstr "" -"若你不希望接受这些条件，我们向您表示诚挚歉意。请点击 <guibutton>退出</" -"guibutton> 来重启计算机。" #. type: Content of: <section><section><info><title> #: en/acceptLicense.xml:76 @@ -100,19 +82,15 @@ msgstr "发行说明" #. type: Content of: <section><section><para> #: en/acceptLicense.xml:83 -#, fuzzy msgid "" "Important information about this particular Mageia release can be viewed by " "clicking on the <emphasis>Release Notes</emphasis> button." msgstr "" -"有关此 Mageia 发布版本的重要信息，可以通过点击 <guibutton>发行说明</" -"guibutton> 来阅读。" #. type: Content of: <section><info><title> #: en/add_supplemental_media.xml:3 -#, fuzzy msgid "Supplemental Installation Media" -msgstr "介质选择 (设置增补的安装介质)" +msgstr "" #. papoteur 2013-04-13 - created #. marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection @@ -121,27 +99,20 @@ msgstr "介质选择 (设置增补的安装介质)" #. 2018/02/16 apb: Update dx2-add_supplemental_media.png to Mga6 #. type: Content of: <section><mediaobject> #: en/add_supplemental_media.xml:18 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-add_supplemental_media." "png\" xml:id=\"dx2-add_supplemental_media-im1\" align=\"center\" revision=" "\"1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-" -"add_supplemental_media.png\" format=\"PNG\" revision=\"1\" xml:id=\"dx2-" -"add_supplemental_media-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:23 -#, fuzzy msgid "" "This screen shows you the list of already recognised repositories. You can " "add other sources for packages, like an optical-disc or a remote source. " "The source selection determines which packages will be available during the " "subsequent steps." msgstr "" -"此窗口中列出了已识别的软件仓库。你可以添加其他的软件源，如光盘或远程资源。所" -"选的源将决定下一步中哪些软件包可用于安装。" #. type: Content of: <section><para> #: en/add_supplemental_media.xml:28 @@ -150,13 +121,11 @@ msgstr "如果需要获取网络资源，请执行以下两步：" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:32 -#, fuzzy msgid "Choosing and activating the network, if not already up." -msgstr "若尚未启用网络链接，请选择并启用它。" +msgstr "" #. type: Content of: <section><orderedlist><listitem><para> #: en/add_supplemental_media.xml:36 -#, fuzzy msgid "" "Selecting a mirror or specifying a URL (very first entry). By selecting a " "mirror, you have access to the selection of all repositories managed by " @@ -164,13 +133,9 @@ msgid "" "emphasis> repositories and the <emphasis>Updates</emphasis>. With the URL, " "you can designate a specific repository or your own NFS installation." msgstr "" -"选择一个镜像，或指定 URL（第一个选项）。若选择了镜像，则您需要能够访问所选择" -"的所有仓库（由 Mageia 管理，例如 Nonfree、Tainted 和 Updates）。若指定了 " -"URL，则可以使用特定的仓库或您的个人 NFS。" #. type: Content of: <section><note><para> #: en/add_supplemental_media.xml:46 -#, fuzzy msgid "" "If you are updating a 64-bit installation which may contain some 32-bit " "packages, it is advised to use this screen to add an online mirror by " @@ -179,15 +144,11 @@ msgid "" "able to update the 32-bit packages. However, after adding an online mirror, " "the installer will find the needed 32-bit packages there." msgstr "" -"若您整从包含 32 位软件包的版本升级到 64 位，我们建议您使用此窗口添加在线镜像" -"（勾选一个网络协议）。64 位 DVD iso 仅包含 64 位软件包和非特定架构的软件包。" -"若添加了在线镜像，则所需 32 位软件包也会被显示在这里。" #. type: Content of: <section><info><title> #: en/addUser.xml:3 -#, fuzzy msgid "User Management" -msgstr "高级用户管理" +msgstr "" #. Lebarhon: 20170210 updated for Mageia 6 (umask) #. 2018/02/12 apb: Text and Typography. @@ -197,7 +158,6 @@ msgstr "高级用户管理" #. 2018/02/24 apb: Changed list style. #. type: Content of: <section><mediaobject> #: en/addUser.xml:12 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref=" "\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id=" @@ -216,7 +176,6 @@ msgstr "设置管理员（root 账户）密码：" #. type: Content of: <section><section><para> #: en/addUser.xml:24 -#, fuzzy msgid "" "It is advisable for all Mageia installations to set a <literal>superuser</" "literal> (Administrator) password, usually called the <emphasis>root </" @@ -226,20 +185,13 @@ msgid "" "repeat the same password in the box underneath, to check that the first " "entry was not mistyped." msgstr "" -"我们建议任何时候安装 <application>Mageia</application> 都设置一个超级用户或管" -"理员密码（Linux 中一般叫做 root 密码）。当你在顶部输入框中输入密码时，盾的颜" -"色将会从红色变为黄色、绿色，用以指示你所输入密码的强度。绿色表示你的密码强度" -"较高。你需要在下方输入框中再次输入相同的密码，以确保你之前的密码没有输错。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:32 -#, fuzzy msgid "" "All passwords are case-sensitive. It is best to use a mixture of letters " "(upper and lower case), numbers and other characters in a password." msgstr "" -"所有的密码都区分大小写。建议在密码中混合使用字母（大写和小写）、数字和其他字" -"符。" #. type: Content of: <section><section><info><title> #: en/addUser.xml:39 @@ -248,55 +200,44 @@ msgstr "输入用户名" #. type: Content of: <section><section><para> #: en/addUser.xml:41 -#, fuzzy msgid "" "Add a User here. A regular user has fewer privileges than the " "<literal>superuser</literal> (root), but enough to use the Internet, office " "applications or play games and anything else the average user might use a " "computer for." msgstr "" -"在这里添加一个用户。一个用户拥有比超级管理员更少的权限，但是网上冲浪，使用办" -"公软件或者玩游戏等是足够的。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:47 -#, fuzzy msgid "<emphasis role=\"bold\">Icon</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:48 -#, fuzzy msgid "Click on this button if you want to change the user's icon" -msgstr "<guibutton>图标</guibutton>：若点击此按钮，则会改变用户图标。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:52 -#, fuzzy msgid "<emphasis role=\"bold\">Real Name</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:53 -#, fuzzy msgid "Insert the user's real name into this text box" -msgstr "<guilabel>真实姓名</guilabel>：在文本框中输入用户的真名。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:56 -#, fuzzy msgid "<emphasis role=\"bold\">Login Name</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:57 -#, fuzzy msgid "" "Enter the user login name or let DrakX use a version of the user's real " "name. <emphasis role=\"bold\">The login name is case-sensitive.</emphasis>" msgstr "" -"<guilabel>登录名</guilabel>：输入用户的登录名，或让 drakx 根据真实姓名自动设" -"置。<emphasis>登录名区分大小写。</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><caution><simpara> #: en/addUser.xml:61 @@ -309,50 +250,38 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/addUser.xml:65 en/setupBootloader.xml:124 -#, fuzzy msgid "<emphasis role=\"bold\">Password</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:66 -#, fuzzy msgid "" "Type in the user password. There is a shield at the end of the text box that " "indicates the strength of the password. (See also <xref linkend=" "\"givePassword\"/>)" msgstr "" -"<guilabel>密码</guilabel>：在此文本框中输入用户密码。后面的盾牌图标将会指示密" -"码强度。（参见 <xref linkend=\"givePassword\"/>）" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:68 -#, fuzzy msgid "" "<emphasis role=\"bold\">Password (again):</emphasis> Retype the user " "password. DrakX will check that you have not mistyped the password." msgstr "" -"<guilabel>确认密码</guilabel>：再次输入密码，安装程序将检查您两次输入的密码是" -"否一致。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:74 -#, fuzzy msgid "" "Any users added while installing Mageia, will have a home directory that is " "both read and write protected (umask=0027)" msgstr "" -"在安装 Mageia 期间添加的任何用户都将拥有读/写保护的主目录（即 umask=0027）。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:76 -#, fuzzy msgid "" "You can add any extra needed users in the <emphasis>Configuration - Summary</" "emphasis> step during the install. Choose <emphasis>User management</" "emphasis>." msgstr "" -"你可以在<emphasis>配置 - 概要</emphasis>一步中添加其他所需用户，只需选择" -"<emphasis>用户管理</emphasis>即可。" #. type: Content of: <section><section><note><para> #: en/addUser.xml:79 @@ -361,41 +290,31 @@ msgstr "也可以在安装完成后改变访问权限。" #. type: Content of: <section><section><info><title> #: en/addUser.xml:85 -#, fuzzy msgid "User Management (advanced)" -msgstr "高级用户管理" +msgstr "" #. type: Content of: <section><section><para> #: en/addUser.xml:87 -#, fuzzy msgid "" "The <emphasis>Advanced</emphasis> option allows you to edit further settings " "for the user you are adding." msgstr "" -"若点击<guibutton>高级</guibutton>按钮，您可以在弹出的窗口中对所添加的用户进行" -"设置。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:91 -#, fuzzy msgid "" "<emphasis>Shell</emphasis>: This drop-down list allows you to change the " "shell available to any user you added in the previous screen. Options are " "<literal>Bash</literal>, <literal>Dash</literal> and <literal>Sh</literal>" msgstr "" -"<guilabel>Shell</guilabel>：可以在下列列表中选择用户所使用的 shell（在上一步" -"中添加），可能的选项有 Bash、Dash 和 Sh。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:97 -#, fuzzy msgid "" "<emphasis>User ID</emphasis>: Here you can set the user ID for any user you " "added in the previous screen. If you are unsure what the purpose of this is, " "then leave it blank." msgstr "" -"<guilabel>用户 ID</guilabel>：这里您可以设置之前所添加的用户的 ID（数值）。若" -"您不确定如何设置，请将其留空。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/addUser.xml:102 @@ -424,7 +343,6 @@ msgstr "选择挂载点" #. 2019/01/04 apb: Typo & minor reword on custom mount-points. #. type: Content of: <section><mediaobject> #: en/ask_mntpoint_s.xml:38 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-chooseMountpoints.png\" format=\"PNG\" revision=\"1\" xml:id=" @@ -432,23 +350,14 @@ msgid "" "<imagedata align=\"center\" fileref=\"live-chooseMountpoints.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-chooseMountPoints-im1\"/> </imageobject>" msgstr "" -"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" -"chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id=" -"\"chooseMountPoints-im1\"></imagedata> </imageobject> <imageobject " -"condition='live'> <imagedata revision=\"1\" fileref=\"live-chooseMountpoints." -"png\" align=\"center\" format=\"PNG\" xml:id=\"live-chooseMountPoints-" -"im1\"></imagedata> </imageobject>" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:49 -#, fuzzy msgid "" "Here you see the Linux partitions that have been found on your computer. If " "you don't agree with the DrakX suggestions, you can change the mount points " "yourself." msgstr "" -"这里你可以查看已找到的 Linux 分区。如果 <application>DrakX</application> 的建" -"议不合适，你可以手动更改挂载点。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:55 @@ -462,7 +371,6 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:63 -#, fuzzy msgid "" "If you have several partitions, you can choose various different " "<emphasis>mount points</emphasis> from the drop down menu, such as " @@ -471,74 +379,55 @@ msgid "" "video</filename> for a partition where you want to store your films, or " "perhaps <filename>/Data</filename> for all your data files." msgstr "" -"如果存在多个分区，你可以从下列列表中选择不同的挂载点来使用，例如 <literal>/</" -"literal>、<literal>/home</literal> 和 <literal>/var</literal>。也可以自定义挂" -"载点，例如将 <literal>/video</literal> 用于存储视频文件，<literal>/cauldron-" -"home</literal> 用于 cauldron 系统的用户主目录。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/ask_mntpoint_s.xml:73 -#, fuzzy msgid "" "For any partitions that you don't need to make use of, you can leave the " "mount point field blank." -msgstr "对于非必需的分区，挂载点一项可以留空。" +msgstr "" #. type: Content of: <section><warning><para> #: en/ask_mntpoint_s.xml:79 -#, fuzzy msgid "" "If you make any changes here, ensure you still have a <filename>/</filename> " "(root) partition." msgstr "" -"如果进行了更改，请确保你仍然具有访问 <literal>/</literal> （根）分区的权限。" #. type: Content of: <section><tip><para> #: en/ask_mntpoint_s.xml:84 -#, fuzzy msgid "" "If you are not sure what to choose, click <emphasis>Previous</emphasis> to " "go back and then tick <emphasis>Custom disk partitioning</emphasis>, where " "you can click on a partition to see its type and size." msgstr "" -"如果不确定如何选择，请点击 <guibutton>上一步</guibutton> 按钮，然后点击 " -"<guilabel>自定义磁盘分区</guilabel>，在出现的窗口中点击分区来查看其类型和大" -"小。" #. type: Content of: <section><para> #: en/ask_mntpoint_s.xml:90 -#, fuzzy msgid "" "If you are sure the mount points are correct, click on <emphasis>Next</" "emphasis>, and choose whether you only want to format the partition " "suggested by DrakX, or more." msgstr "" -"若确定挂载点设置正确，则可点击 <guibutton>下一步</guibutton>，并确定是否根据 " -"DrakX 的建议格式化分区等。" #. type: Content of: <section><info><title> #: en/bestTime.xml:5 -#, fuzzy msgid "Clock Settings" -msgstr "时钟设置" +msgstr "" #. type: Content of: <section><mediaobject> #: en/bestTime.xml:8 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" align=\"center\" fileref=\"live-" "bestTime.png\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " -"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/bestTime.xml:12 -#, fuzzy msgid "" "Here, you can select whether your computer internal clock is set to local " "time or UTC time." -msgstr "在这一步中，你需要选择内部时钟的计时方式（本地时间或 UTC 时间）。" +msgstr "" #. type: Content of: <section><para> #: en/bestTime.xml:14 @@ -598,11 +487,10 @@ msgstr "在 BIOS/CSM/Legacy 模式下" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:62 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bootCSM.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:67 @@ -617,9 +505,8 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:75 en/bootLive.xml:147 -#, fuzzy msgid "<emphasis role=\"bold\">Boot Mageia</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:77 @@ -630,17 +517,15 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:81 -#, fuzzy msgid "Once the boot is done, you can proceed to the installation." -msgstr "此处您的配置将保留并用于安装过程。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:86 en/bootLive.xml:102 -#, fuzzy msgid "" "<emphasis role=\"bold\">+ use non-free video drivers (slower to boot)</" "emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:89 @@ -649,15 +534,13 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:96 en/bootLive.xml:155 en/installer.xml:109 -#, fuzzy msgid "<emphasis role=\"bold\">Install Mageia</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:98 en/bootLive.xml:157 -#, fuzzy msgid "This option will install Mageia to a hard disk." -msgstr "Install Mageia：将 Mageia 直接安装到硬盘。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/bootLive.xml:105 @@ -666,9 +549,8 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:111 en/installer.xml:125 -#, fuzzy msgid "<emphasis role=\"bold\">Memory Test</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/bootLive.xml:113 en/installer.xml:127 @@ -679,9 +561,8 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:118 en/bootLive.xml:161 -#, fuzzy msgid "<emphasis role=\"bold\"> F2 Language</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:120 en/bootLive.xml:163 @@ -698,30 +579,23 @@ msgstr "在 UEFI 模式下" #. type: Content of: <section><section><mediaobject> #: en/bootLive.xml:133 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-bootUEFI.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"bootUEFI-im1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" -"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" #. type: Content of: <section><section><mediaobject><caption><para> #: en/bootLive.xml:139 -#, fuzzy msgid "First screen while booting in UEFI mode" -msgstr "在 BIOS 模式下引导时的第一个画面" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/bootLive.xml:149 -#, fuzzy msgid "" "This option will boot the Mageia Live system from the connected DVD/USB " "media (expect a very slow system compared to an installed OS). Once the " "boot is done, you can proceed to the installation" msgstr "" -"Boot Mageia：将从媒体（CD/DVD 或 U 盘）直接启动 Mageia 5，并且不会向硬盘写入" -"任何数据，所以系统可能运行较慢。引导完成后，即可将系统安装到硬盘。" #. type: Content of: <section><section><note><para> #: en/bootLive.xml:170 @@ -743,24 +617,18 @@ msgstr "" #. type: Content of: <section><para> #: en/chooseDesktop.xml:26 -#, fuzzy msgid "" "After the selection step(s), you will see a slideshow during the " "installation of required packages. The slideshow can be disabled by pressing " "the <emphasis>Details</emphasis> button." msgstr "" -"在选择完成之后，将会在安装软件包时展示一系列幻灯片。可以按 <guilabel>详细</" -"guilabel> 按钮来关闭幻灯片显示。" #. type: Content of: <section><mediaobject> #: en/chooseDesktop.xml:31 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-chooseDesktop.png\" " "format=\"PNG\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" " -"align=\"center\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/chooseDesktop.xml:38 @@ -771,7 +639,6 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/chooseDesktop.xml:44 -#, fuzzy msgid "" "Select <emphasis>Custom</emphasis> if you do not wish to use either (or, " "actually use both) of these, or if you want to modify the default software " @@ -779,11 +646,6 @@ msgid "" "lighter than the previous two, sporting less eye candy and having fewer " "packages installed by default." msgstr "" -"请选择 <application>KDE</application> 或 <application>GNOME</application> 作" -"为桌面环境。这两种环境均包含有用的应用程序盒工具。若希望全部安装或均不安装，" -"或自定义要安装的默认软件，请点击 <guilabel>自定义</guilabel>。" -"<application>LXDE</application> 桌面环境较前两者更加轻便，视觉效果较低，默认" -"安装的软件包也更少。" #. type: Content of: <section><info><title> #: en/choosePackageGroups.xml:3 @@ -803,51 +665,41 @@ msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:16 -#, fuzzy msgid "" "Packages are arranged into common groups, to make choosing what you need on " "your system a lot easier. The groups are fairly self explanatory, however " "more information about the content of each is available in tool-tips which " "become visible as the mouse is hovered over them." msgstr "" -"软件包按组列出，您可以更方便地选择所需软件。若需要查看某一组的详细说明，请将" -"鼠标移至该组的名称上方。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:23 -#, fuzzy msgid "<emphasis role=\"bold\">Workstation</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:27 -#, fuzzy msgid "<emphasis role=\"bold\">Server</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:31 -#, fuzzy msgid "<emphasis role=\"bold\">Graphical Environment</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/choosePackageGroups.xml:35 -#, fuzzy msgid "" "<emphasis role=\"bold\">Individual Package Selection</emphasis>: you can use " "this option to manually add or remove packages" -msgstr "单独选择软件包：您可以使用此选项来手动添加/移除软件包。" +msgstr "" #. type: Content of: <section><para> #: en/choosePackageGroups.xml:40 -#, fuzzy msgid "" "See <xref linkend=\"minimal-install\"/> for instructions on how to do a " "minimal install (without or with X & IceWM)." msgstr "" -"请阅读 <xref linkend=\"minimal-install\"/> 来了解如何进行最小化安装（包活或不" -"包括 X 服务和 IceWM 桌面环境）。" #. type: Content of: <section><info><title> #: en/choosePackagesTree.xml:3 @@ -859,24 +711,19 @@ msgstr "选择单个软件包" #. 2018/02/25 apb: add xreflabel to this section. #. type: Content of: <section><mediaobject> #: en/choosePackagesTree.xml:13 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackagesTree.png" "\" align=\"center\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png" -"\" align=\"center\"/> </imageobject>" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:18 -#, fuzzy msgid "" "Here you can add or remove any extra packages to customize your installation." -msgstr "您可以在此处添加或移除额外的软件包，或自定义安装。" +msgstr "" #. type: Content of: <section><para> #: en/choosePackagesTree.xml:21 -#, fuzzy msgid "" "After having made your choice, you can click on the <emphasis>floppy</" "emphasis> icon at the bottom of the page to save your choice of packages " @@ -884,9 +731,6 @@ msgid "" "same packages on another system, by pressing the same button during install " "and choosing to load it." msgstr "" -"在确定选择后，您可以点击页面底部的 <guibutton>floppy icon</guibutton> 按钮来" -"保存选择（同时也会将配置保存到 U 盘中）。你可以使用此文件在其他系统上进行相" -"同的安装部署（只需在安装时再次点击此按钮并加载配置文件即可）。" #. type: Content of: <section><info><title> #: en/configureServices.xml:3 @@ -899,21 +743,17 @@ msgstr "配置服务" #. 2018/02/25 apb: a) add xreflabel for this section. b) Added some bullets to the text. #. type: Content of: <section><mediaobject> #: en/configureServices.xml:15 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-configureServices.png" "\" xml:id=\"configureServices-im1\" align=\"center\" revision=\"1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:" -"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><para> #: en/configureServices.xml:20 -#, fuzzy msgid "" "Here you can choose which services should start when you boot your system." -msgstr "您可以在此处设置系统启动时需要启用的服务。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureServices.xml:25 @@ -945,7 +785,6 @@ msgstr "配置时区" #. 2018/02/25 apb: Added xreflabel to this section. #. type: Content of: <section><mediaobject> #: en/configureTimezoneUTC.xml:15 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id=" "\"configureTimezoneUTC-im1\" align=\"center\" fileref=\"dx2-" @@ -953,27 +792,20 @@ msgid "" "condition=\"live\"> <imagedata format=\"png\" fileref=\"live-timeZone.png\" " "align=\"center\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata xml:id=" -"\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-" -"configureTimezoneUTC.png\" align=\"center\" format=\"PNG\"/> </imageobject> " -"<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" " -"format=\"PNG\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureTimezoneUTC.xml:26 -#, fuzzy msgid "" "Choose your timezone by choosing your country, or a city close to you in the " "same timezone." -msgstr "选择国家/地区或城市来确定您的时区。" +msgstr "" #. type: Content of: <section><para> #: en/configureTimezoneUTC.xml:32 -#, fuzzy msgid "" "In the next screen you can choose to set your hardware clock to local time " "or to GMT, also known as UTC." -msgstr "在下一个窗口中，您可以将硬件时钟设置为本地时间或 GMT（也即 UTC）。" +msgstr "" #. type: Content of: <section><note><para> #: en/configureTimezoneUTC.xml:37 @@ -990,15 +822,11 @@ msgstr "选择一个X服务器(配置您的显示卡)" #. type: Content of: <section><mediaobject> #: en/configureX_card_list.xml:29 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_card_list." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_card_list-im1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." -"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" -"imageobject>" #. type: Content of: <section><para> #: en/configureX_card_list.xml:35 @@ -1016,25 +844,21 @@ msgstr "若安装程序无法正确检测您的显卡，请在以下列表中选 #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_card_list.xml:41 en/configureX_monitor.xml:74 -#, fuzzy msgid "Vendor" -msgstr "制造商" +msgstr "厂家" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:45 -#, fuzzy msgid "then the make of your card" -msgstr "显卡名" +msgstr "" #. type: Content of: <section><para><itemizedlist><listitem><para> #: en/configureX_card_list.xml:49 -#, fuzzy msgid "and the model of card" -msgstr "卡的类型" +msgstr "" #. type: Content of: <section><para> #: en/configureX_card_list.xml:53 -#, fuzzy msgid "" "If you cannot find your card in the vendor lists (because it's not yet in " "the database or it's an older card) you may find a suitable driver in the " @@ -1043,21 +867,16 @@ msgid "" "for your card there is the option of using the VESA driver which provides " "basic capabilities." msgstr "" -"Xorg 目录提供了超过 40 种通用的开源显卡驱动。若您仍然无法找到合适的显卡驱动，" -"请使用 vesa 驱动以确保基本的显示功能。" #. type: Content of: <section><caution><para> #: en/configureX_card_list.xml:61 -#, fuzzy msgid "" "Be aware that if you select an incompatible driver you may only have access " "to the <emphasis>Command Line Interface</emphasis>" msgstr "" -"请注意，若选择了不兼容的驱动，您可能无法使用图形化界面（但仍可使用命令行）。" #. type: Content of: <section><para> #: en/configureX_card_list.xml:65 -#, fuzzy msgid "" "Some video card manufacturers provide proprietary drivers for Linux which " "may only be available in the <emphasis>Nonfree</emphasis> repository and in " @@ -1066,8 +885,6 @@ msgid "" "access them. If you didn't enable it previously, you should do this after " "your first reboot." msgstr "" -"部分显卡制造商仅提供私有 Linux 驱动（在 Nonfree 仓库中），部分驱动仅能在制造" -"商的官网上找到。" #. type: Content of: <section><info><title> #: en/configureX_chooser.xml:11 @@ -1081,19 +898,14 @@ msgstr "显示卡和显示器配置" #. 2019/01/06 apb: Slight reword, split 1st para in two. #. type: Content of: <section><mediaobject> #: en/configureX_chooser.xml:26 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_chooser." "png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_chooser-im1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor." -"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </" -"imageobject>" #. type: Content of: <section><para> #: en/configureX_chooser.xml:32 -#, fuzzy msgid "" "No matter which graphical environment (also known as desktop environment) " "you chose for this install of Mageia, they are all based on a graphical user " @@ -1102,11 +914,6 @@ msgid "" "graphical environment to work well, the following <quote>X</quote> settings " "need to be correct." msgstr "" -"无论是哪一种图形环境（也叫桌面环境），都基于一个叫做 <acronym>X 窗口系统</" -"acronym>（也叫 <acronym>X</acronym>）的服务。因此，必须正确设定以下的 " -"<acronym>X</acronym> 服务属性才能使用 <acronym>KDE</acronym>、" -"<acronym>Gnome</acronym>、<acronym>LXDE</acronym>等图形环境。若 " -"<application>DrakX</application> 没有提供默认选项，请手动指定正确参数。" #. type: Content of: <section><para> #: en/configureX_chooser.xml:39 @@ -1117,9 +924,8 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:44 -#, fuzzy msgid "<emphasis role=\"bold\">Graphic Card</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:47 @@ -1130,13 +936,11 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:52 -#, fuzzy msgid "<emphasis role=\"bold\">Monitor</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:55 -#, fuzzy msgid "" "You can choose Plug 'n Play, if applicable, or choose your monitor from the " "<emphasis>Vendor</emphasis> or <emphasis>Generic</emphasis> lists. Choose " @@ -1144,34 +948,24 @@ msgid "" "vertical refresh rates of your monitor. See <xref linkend=" "\"configureX_monitor\"/>." msgstr "" -"<emphasis><guibutton>显示器</guibutton></emphasis>：您可以选择 <guilabel>即插" -"即用</guilabel> 显示器，或从 <guilabel>制造商</guilabel> 或 <guilabel>通用</" -"guilabel> 列表中选择显示器。若需要手动指定显示器的横向/纵向刷新率，请点击 " -"<guilabel>自定义</guilabel>。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:63 -#, fuzzy msgid "<emphasis role=\"bold\">Resolution</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:66 -#, fuzzy msgid "The resolution and color depth of your monitor can be set here." msgstr "" -"<emphasis><guibutton>分辨率</guibutton></emphasis>：选择显示器的分辨率和色彩" -"深度。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:71 -#, fuzzy msgid "<emphasis role=\"bold\">Test</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:74 -#, fuzzy msgid "" "The test button does not always appear during install. If the option is " "there, and you test your settings, you should be asked to confirm that your " @@ -1181,25 +975,16 @@ msgid "" "satisfactory. If the test option is not available, then make sure your " "settings are on the safe side." msgstr "" -"<emphasis><guibutton>测试</guibutton></emphasis>：测试按钮不一定总是出现在安" -"装中。您可以按下此按钮来查看设置是否正确。若出现询问设置是否正确的对话框，您" -"可以选择“是”，则当前设置会被保留。若您没有看到任何对话框，您将可以回到配置窗" -"口，并重新进行配置。<emphasis>若无法使用测试功能，请确保您的设置是正确的。</" -"emphasis>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:85 -#, fuzzy msgid "<emphasis role=\"bold\">Options</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/configureX_chooser.xml:88 -#, fuzzy msgid "Here you can choose to enable or disable various options." msgstr "" -"<emphasis><guibutton>选项</guibutton></emphasis>：您可以在此处启用或禁用各类" -"选项。" #. type: Content of: <section><warning><para> #: en/configureX_chooser.xml:93 @@ -1224,15 +1009,12 @@ msgstr "DrakX 有齐全的显卡数据库，一般情况下可以正确识别您 #. type: Content of: <section><warning><para> #: en/configureX_monitor.xml:30 -#, fuzzy msgid "" "<emphasis role=\"bold\">Selecting a monitor with different characteristics " "could damage your monitor or video hardware. Please don't try something " "without knowing what you are doing.</emphasis> If in doubt you should " "consult your monitor documentation." msgstr "" -"<emphasis>选择错误的属性可能会损坏显示器或视频设备。若不确定，请不要轻易尝试" -"未知模式。</emphasis>若仍有疑问，请查询显示器文档。" #. type: Content of: <section><mediaobject> #: en/configureX_monitor.xml:38 @@ -1252,15 +1034,12 @@ msgstr "自定义" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:49 -#, fuzzy msgid "" "This option allows you to set two critical parameters: the vertical refresh " "rate and the horizontal sync rate. Vertical refresh determines how often the " "screen is refreshed and horizontal sync is the rate at which scan lines are " "displayed." msgstr "" -"此选项允许您设置两个重要参数：垂直刷新率和水平同步率。垂直刷新率决定屏幕刷新" -"的周期，水平同步率决定扫描行的显示速率。" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:55 @@ -1276,15 +1055,14 @@ msgstr "" #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_monitor.xml:64 msgid "Plug'n Play" -msgstr "" +msgstr "即插即用" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:67 -#, fuzzy msgid "" "This is the default option and automatically tries to determine the monitor " "type from the monitor database." -msgstr "默认选项，根据显示器数据库确定显示器类别。" +msgstr "" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:77 @@ -1306,11 +1084,10 @@ msgstr "" #. type: Content of: <section><variablelist><varlistentry><term> #: en/configureX_monitor.xml:96 msgid "Generic" -msgstr "" +msgstr "通用" #. type: Content of: <section><variablelist><varlistentry><listitem><para> #: en/configureX_monitor.xml:99 -#, fuzzy msgid "" "Selecting this group will list nearly 30 display configurations such as " "1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is " @@ -1318,128 +1095,95 @@ msgid "" "when your video hardware cannot be determined automatically. Once again it " "may be wise to be conservative in your selections." msgstr "" -"此组可以支持近30种显示格式，如 1024x768 @ 60Hz 和笔记本上使用的平板显示器。当" -"您因硬件无法被正确识别而必须使用 Vesa 显卡驱动器时，此选项将会提供最佳的兼容" -"性。推荐保留此选项。" #. type: Content of: <section><info><title> #: en/diskdrake.xml:22 -#, fuzzy msgid "Custom Disk Partitioning with DiskDrake" -msgstr "使用 DiskDrake 自定义磁盘分区方式" +msgstr "" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:27 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake.png\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake2.png" -"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> " -"<imagedata fileref=\"live-diskdrake2.png\" align=\"center\"/> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:38 -#, fuzzy msgid "" "Modify the layout of your disk(s) here. You can remove or create partitions, " "change the filesystem or size of a partition and even view their details " "before you start." msgstr "" -"在此处调整磁盘布局。您可以移除或创建分区、改变文件系统类型或改变分区大小，同" -"时预览操作后的效果。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:45 -#, fuzzy msgid "" "There is a tab at the top for every detected hard disk (or other storage " "device, like a USB key). In the screenshot above there are two available " "devices: <filename>sda </filename>and <filename>sdb</filename>." msgstr "" -"每个硬盘及其他存储设备（如 U 盘）都在对应的标签页中显示。例如，在三个标签页中" -"分别显示 sda、sdb、sdc 的磁盘布局。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:52 -#, fuzzy msgid "" "For all other actions: click on the desired partition first. Then view it, " "or choose a filesystem and a mount point, resize it or wipe it. " "<emphasis>Expert mode</emphasis> provides more options such as to label " "(name) a partition, or to choose a partition type." msgstr "" -"对于其他操作：请先点击要操作的分区；然后查看其详细信息，或选择文件系统和挂载" -"点，改变其大小或擦除它。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/diskdrake.xml:60 -#, fuzzy msgid "" "Continue until you have adjusted everything to your satisfaction, then click " "<emphasis>Done</emphasis> when you're ready." -msgstr "请继续，直到所需操作完成。" +msgstr "" #. type: Content of: <section><warning><orderedlist><listitem><para> #: en/diskdrake.xml:69 -#, fuzzy msgid "" "Take care with the <emphasis>Clear all</emphasis> option, use it only if you " "are sure you want to wipe all partitions on the selected storage device." -msgstr "点击 <guibutton>全部清除</guibutton> 可以删除所选设备上的全部分区。" +msgstr "" #. type: Content of: <section><warning><orderedlist><listitem><para> #: en/diskdrake.xml:75 -#, fuzzy msgid "" "If you wish to use encryption on your <filename>/</filename> partition you " "must ensure that you have a separate <filename>/boot</filename> partition. " "The encryption option for the <filename>/boot</filename> partition must NOT " "be set, otherwise your system will be unbootable." msgstr "" -"若您希望将 <literal>/</literal> 分区加密，您必须确保 /boot 位于单独的分区中，" -"并且该分区不能被加密；否则，系统将无法启动。" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/diskdrake.xml:87 -#, fuzzy msgid "" "If you are installing Mageia on a UEFI system, check that an ESP (EFI System " "Partition) is present and correctly mounted on <filename>/boot/EFI</" "filename>. See Figure 1 below." msgstr "" -"若您需要在 UEFI 硬件上使用 Mageia，请确保您设置了 ESP（EFI 系统分区），并且已" -"被挂载至 /boot/EFI（见下）" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/diskdrake.xml:93 -#, fuzzy msgid "" "If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot " "partition is present and of the correct type. See Figure 2 below." msgstr "" -"若您使用传统的硬件+GPT硬盘分区，请确保您设置了 BIOS 引导分区，并且为其指定了" -"正确的分区标志" #. type: Content of: <section><figure><title> #: en/diskdrake.xml:101 -#, fuzzy msgid "EFI System Partition" -msgstr "使用现存的分区" +msgstr "EFI 系统分区" #. type: Content of: <section><figure><mediaobject> #: en/diskdrake.xml:104 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-diskdrake2.png\"/> </imageobject> <imageobject condition=\"live\"> " "<imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake2.png" -"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> " -"<imagedata fileref=\"live-diskdrake2.png\" align=\"center\"/> </imageobject>" #. type: Content of: <section><figure> #: en/diskdrake.xml:103 en/diskdrake.xml:117 @@ -1453,17 +1197,12 @@ msgstr "" #. type: Content of: <section><mediaobject> #: en/diskdrake.xml:118 en/doPartitionDisks.xml:201 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </" "imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -"imageobject>" #. type: Attribute 'xml:lang' of: <section> #: en/diskPartitioning.xml:1 @@ -1472,59 +1211,46 @@ msgstr "zh_CN" #. type: Content of: <section><title> #: en/diskPartitioning.xml:4 -#, fuzzy msgid "Partitioning" msgstr "分区" #. type: Content of: <section><info><title> #: en/doPartitionDisks.xml:27 -#, fuzzy msgid "Suggested Partitioning" -msgstr "分区" +msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:30 -#, fuzzy msgid "" "In this screen you can see the content of your hard drive(s) along with the " "DrakX partitioning proposals for where to install Mageia." msgstr "" -"在此处您可以查看硬盘驱动器中的内容，并选择 DrakX 分区向导所提供的 " -"<application>Mageia</application> 的安装方法。" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:34 -#, fuzzy msgid "" "The actual options available from those shown below will vary according to " "the layout and content of your particular hard drive(s)." -msgstr "根据特定硬盘布局和内容的不同，下列选项可能会有所不同。" +msgstr "" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:39 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks.png\"/> </" "imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -"imageobject>" #. type: Content of: <section><itemizedlist><title> #: en/doPartitionDisks.xml:49 -#, fuzzy msgid "Main Options" -msgstr "选项" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:52 -#, fuzzy msgid "<emphasis role=\"bold\">Use Existing Partitions</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:55 @@ -1537,9 +1263,8 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:61 -#, fuzzy msgid "<emphasis role=\"bold\">Use Free Space</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:64 @@ -1550,26 +1275,21 @@ msgstr "若硬盘上有未使用的区域，此选项将会把 Mageia 安装到 #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:70 -#, fuzzy msgid "" "<emphasis role=\"bold\">Use Free Space on a Windows Partition</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:73 -#, fuzzy msgid "" "If you have unused space on an existing Windows partition, the installer may " "offer to use it. This can be a useful way of making room for your new Mageia " "installation, but is a risky operation so you should make sure you have " "backed up all important files!" msgstr "" -"此选项可用于为 Mageia 腾出安装空间，但操作过程有一定风险。请您确保已经备份了" -"所有重要文件！" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:79 -#, fuzzy msgid "" "With this option, the installer displays the remaining Windows partition in " "light blue and the proposed Mageia partition in dark blue with their " @@ -1577,32 +1297,24 @@ msgid "" "clicking and dragging the gap between both partitions. See the following " "screenshot:" msgstr "" -"安装程序将用亮蓝色标记其余的 Windows 分区，用深蓝色标记将用于安装 Mageia 的分" -"区位置。您可以点击和拖动目标分区之间的空隙以便更改分区大小（参见下面的截" -"图）。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:87 -#, fuzzy msgid "<emphasis role=\"bold\">Erase and use Entire Disk</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:90 -#, fuzzy msgid "This option will allocate the entire drive for Mageia" -msgstr "此选项将会把整个硬盘空间用于安装 Mageia。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><warning><para> #: en/doPartitionDisks.xml:94 -#, fuzzy msgid "" "This will erase ALL data on the selected hard drive. Take care! If you " "intend to use part of the disk for something else, or you already have data " "on the drive that you are not prepared to lose, then do not use this option." msgstr "" -"若您需要将磁盘的一部分用于存储其他数据，或者您不希望驱动器上的数据丢失，请不" -"要使用此选项。" #. type: Content of: <section><itemizedlist><listitem><important><para> #: en/doPartitionDisks.xml:101 @@ -1620,9 +1332,8 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:112 -#, fuzzy msgid "<emphasis role=\"bold\">Custom Disk Partitioning</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:115 @@ -1633,17 +1344,12 @@ msgstr "允许您完全控制系统在硬盘上的安装方式。" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:122 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-doPartitionDisks2.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks2.png\"/> </" "imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -"imageobject>" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:131 @@ -1655,39 +1361,34 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:137 -#, fuzzy msgid "" "If the total available space is less than 50 GB, then only one partition is " "created. This will be the <filename>/</filename> (root) partition." -msgstr "若可用空间小于 50GB，则只创建 / 分区，不创建单独的 /home 分区。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:143 -#, fuzzy msgid "" "If the total available space is greater than 50 GB, then three partitions " "are created" -msgstr "若总可用空间大于 50GB，则创建三个分区。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:148 -#, fuzzy msgid "" "6/19 of the total available place is allocated to <filename>/</filename> " "with a maximum of 50 GB" -msgstr "其中 6/19 被分配给 / 分区，最大不超过 50GB" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:153 -#, fuzzy msgid "1/19 is allocated to <filename>swap</filename> with a maximum of 4 GB" -msgstr "1/19 被分配给交换分区，最大不超过 4GB" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:158 -#, fuzzy msgid "the rest (at least 12/19) is allocated to <filename>/home</filename>" -msgstr "剩余部分（至少 12/19）被分配给 /home 分区" +msgstr "" #. type: Content of: <section><para> #: en/doPartitionDisks.xml:165 @@ -1713,7 +1414,6 @@ msgstr "" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:183 -#, fuzzy msgid "" "If you are using a UEFI system, the ESP (EFI System Partition) will be " "automatically detected - or created if it does not exist yet - and mounted " @@ -1721,12 +1421,9 @@ msgid "" "emphasis> option is the only one that allows to check it has been correctly " "done." msgstr "" -"若您使用 UEFI 系统，将自动检测并创建 ESP（EFI 系统分区），之后将其挂载到 /" -"boot/EFI。“自定义”选项仅用于检测该操作的结果是否正确" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:189 -#, fuzzy msgid "" "If you are using a Legacy (also known as BIOS) system with a GPT partitioned " "disk, you need to create a BIOS boot partition if it doesn't already exist. " @@ -1735,9 +1432,6 @@ msgid "" "other partition. Be sure to select <quote>BIOS boot partition</quote> for " "filesystem type." msgstr "" -"若您使用传统的硬件（即 CSM 或 BIOS），并且使用 GPT 格式的硬盘分区，您需要先" -"创建一个 BIOS 引导分区。该分区一般为 1 MiB 左右，且不会被挂载。请选择“自定义" -"磁盘分区”，然后手动创建一个 BIOS 引导分区。" #. type: Content of: <section><note><para> #: en/doPartitionDisks.xml:196 @@ -1746,58 +1440,44 @@ msgstr "" #. type: Content of: <section><mediaobject> #: en/doPartitionDisks.xml:211 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks4.png" "\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </" -"imageobject>" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:217 -#, fuzzy msgid "" "Some newer drives are now using 4096 byte logical sectors, instead of the " "previous standard of 512. Due to lack of available hardware, the " "partitioning tool used in the installer has not been tested with such a " "drive." msgstr "" -"一些新式驱动器的逻辑扇区大小为 4096 字节，而非传统的 512 字节。此类硬件尚未被" -"测试。此外，一些 SSD 驱动器的擦除块大小为 1MB。若您正在使用这类驱动器，我们建" -"议您使用其他的分区工具（如gparted）预先进行分区操作：" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:222 -#, fuzzy msgid "" "Some SSD devices now use an erase block size over 1 MB. If you have such a " "device we suggest that you partition the drive in advance, using an " "alternative partitioning tool like gparted, and to use the following " "settings:" msgstr "" -"一些新式驱动器的逻辑扇区大小为 4096 字节，而非传统的 512 字节。此类硬件尚未被" -"测试。此外，一些 SSD 驱动器的擦除块大小为 1MB。若您正在使用这类驱动器，我们建" -"议您使用其他的分区工具（如gparted）预先进行分区操作：" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:229 -#, fuzzy msgid "<emphasis>Align to</emphasis> = MiB" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><important><itemizedlist><listitem><para> #: en/doPartitionDisks.xml:233 -#, fuzzy msgid "<emphasis>Free space preceding (MiB)</emphasis> = 2" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><important><para> #: en/doPartitionDisks.xml:237 -#, fuzzy msgid "" "Also make sure all partitions are created using an even number of megabytes." -msgstr "确保所有创建的分区的大小均为偶数倍 MB。" +msgstr "" #. type: Content of: <article><info><title> #: en/DrakLive-cover.xml:15 en/DrakLive-cover.xml:54 en/DrakLive.xml:16 @@ -1826,11 +1506,9 @@ msgstr "Mageia 的官方文档" #. type: Content of: <book><info><cover><mediaobject> #: en/DrakLive-cover.xml:33 en/DrakX-cover.xml:31 -#, fuzzy msgid "" "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>" #. type: Content of: <article><info><cover><para> #: en/DrakLive-cover.xml:38 en/DrakLive.xml:25 en/DrakX-cover.xml:36 @@ -1891,14 +1569,11 @@ msgstr "</note>" #. type: Content of: <article><info><cover><para> #: en/DrakLive.xml:33 -#, fuzzy msgid "" "It was written by volunteers in their free time. Please contact the <link " "ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation " "Team</link>, if you would like to help improve this manual." msgstr "" -"内容由志愿者编写。若您希望完善此手册，请联系 <link ns6:href=\"https://wiki." -"mageia.org/en/Documentation_team\">文档团队</link>。" #. type: Content of: <article><info><title> #: en/DrakX-cover.xml:13 en/DrakX-cover.xml:64 en/DrakX-inline.xml:3 @@ -1935,21 +1610,17 @@ msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:18 -#, fuzzy msgid "" "You have finished installing and configuring Mageia and it is now safe to " "remove the installation medium and reboot your computer." -msgstr "您以完成安装和配置 Mageia，现在可以安全地移除安装介质并重新启动。" +msgstr "" #. type: Content of: <section><para> #: en/exitInstall.xml:22 -#, fuzzy msgid "" "After rebooting, you can use the bootloader screen to choose which operating " "system to start (if there are more than one on your computer)." msgstr "" -"重启之后，在引导界面可以看到操作系统选项（若您的计算机上有两个以上操作系" -"统）。" #. type: Content of: <section><para> #: en/exitInstall.xml:26 @@ -1965,16 +1636,15 @@ msgstr "Enjoy!" #. type: Content of: <section><para> #: en/exitInstall.xml:32 -#, fuzzy msgid "" "Visit <link ns4:href=\"http://www.mageia.org/en/\">www.mageia.org/en/</link> " "if you have any questions or want to contribute to Mageia" -msgstr "若您有任何疑问，或希望帮助完善 Mageia，请访问 www.mageia.org。" +msgstr "" #. type: Content of: <section><info><title> #: en/firewall.xml:7 msgid "Firewall" -msgstr "" +msgstr "防火墙" #. type: Content of: <section><para> #: en/firewall.xml:10 @@ -2008,9 +1678,8 @@ msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:29 -#, fuzzy msgid "<emphasis role=\"bold\">Advanced</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:31 @@ -2022,9 +1691,8 @@ msgstr "" #. type: Content of: <section><para> #: en/firewall.xml:35 -#, fuzzy msgid "<emphasis><port-number>/<protocol></emphasis>" -msgstr "<emphasis>通用</emphasis>" +msgstr "" #. type: Content of: <section><simplelist><member> #: en/firewall.xml:38 @@ -2067,7 +1735,6 @@ msgstr "格式化" #. 2018/02/10 apb: Text and typography. #. type: Content of: <section><mediaobject> #: en/formatPartitions.xml:24 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-formatPartitions.png\" format=\"PNG\" revision=\"1\" xml:id=" @@ -2075,65 +1742,47 @@ msgid "" "<imagedata align=\"center\" fileref=\"live-formatPartitions.png\" format=" "\"PNG\" revision=\"1\" xml:id=\"live-formatPartitions-im1\"/> </imageobject>" msgstr "" -"<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-" -"formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id=" -"\"formatPartitions-im1\"> </imagedata> </imageobject> <imageobject " -"condition='live'> <imagedata revision=\"1\" fileref=\"live-formatPartitions." -"png\" format=\"PNG\" align=\"center\" xml:id=\"live-formatPartitions-im1\"> " -"</imagedata> </imageobject>" #. type: Content of: <section><para> #: en/formatPartitions.xml:35 -#, fuzzy msgid "" "Here you can choose which partition(s) you wish to format. Any data on " "partitions <emphasis>not</emphasis> marked for formatting will be preserved." msgstr "" -"这里您可以选择要格式化的分区。<emphasis>未标记为格式化</emphasis>的分区上的数" -"据将会被保留。" #. type: Content of: <section><para> #: en/formatPartitions.xml:39 -#, fuzzy msgid "" "Usually, at least the partitions that DrakX selected need to be formatted." -msgstr "一般情况下，DrakX 自动选择的分区需要被格式化。" +msgstr "" #. type: Content of: <section><para> #: en/formatPartitions.xml:42 -#, fuzzy msgid "" "Click on <emphasis>Advanced</emphasis> to choose the partitions you want to " "check for so-called <emphasis>bad blocks</emphasis>" msgstr "" -"可以点击 <guibutton>高级</guibutton> 来选择您要检查<emphasis>坏块</emphasis>" -"的分区。" #. type: Content of: <section><tip><para> #: en/formatPartitions.xml:47 -#, fuzzy msgid "" "If you're not sure you have made the right choice, you can click on " "<emphasis>Previous</emphasis>, again on <emphasis>Previous</emphasis> and " "then on <emphasis>Custom</emphasis> to get back to the main screen, where " "you can choose to view details of your partitions." msgstr "" -"若您不确定所做选择是否正确，可以点击两次 <guibutton>上一页</guibutton>回到主" -"界面，然后查看相应分区中的数据。" #. type: Content of: <section><para> #: en/formatPartitions.xml:54 -#, fuzzy msgid "" "When you are confident about the selections, click on <emphasis>Next</" "emphasis> to continue." -msgstr "若您确定选项正确，请点击<guibutton>下一页</guibutton>继续。" +msgstr "" #. type: Content of: <section><info><title> #: en/graphicalConfiguration.xml:13 -#, fuzzy msgid "Graphical Configuration" -msgstr "显示卡和显示器配置" +msgstr "" #. type: Content of: <section><info><title> #: en/installer.xml:32 @@ -2157,34 +1806,27 @@ msgstr "安装步骤" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:44 -#, fuzzy msgid "" "The install process is divided into a number of steps - the status of which " "is indicated in a panel to the left of the screen." -msgstr "安装过程被分为多个步骤，可以在侧边栏看到安装进度。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:50 -#, fuzzy msgid "" "Each step has one or more screens, which may also have <emphasis>Advanced</" "emphasis> sections with extra, less commonly required options." msgstr "" -"每一步包含一个或多个窗口，并且可使用<guibutton>高级</guibutton>按钮查看不常用" -"的选项。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/installer.xml:56 -#, fuzzy msgid "" "Most screens have <emphasis>Help</emphasis> buttons for further details " "about the particular step." msgstr "" -"多数窗口中有<guibutton>帮助</guibutton>按钮，可以提供当前操作的有关说明。" #. type: Content of: <section><section><caution><para> #: en/installer.xml:62 -#, fuzzy msgid "" "If at some point during the install you decide to abort the installation, it " "is possible to reboot, but please think twice before you do this. Once a " @@ -2192,10 +1834,6 @@ msgid "" "computer is no longer in the same state and rebooting it could very well " "leave you with an unusable system." msgstr "" -"若安装过程在某一步中断，您可以选择重启，但请三思而后行。一旦分区被格式化，或" -"升级过程开始，电脑中的内容将发生变化，此时重启可能导致系统无法使用。若您确定" -"要重启，可以按 <guibutton>Alt Ctrl F2</guibutton> 切换到终端，然后按下 " -"<guibutton>Alt Ctrl Delete</guibutton> 来触发重启操作。" #. type: Content of: <section><section><caution><para> #: en/installer.xml:68 @@ -2222,11 +1860,10 @@ msgstr "" #. type: Content of: <section><section><para> #: en/installer.xml:92 -#, fuzzy msgid "" "The welcome menu screen has various options, however the default option will " "start the installer, and is normally all that you will need." -msgstr "初始页中有很多选项，安装器将会选择其中的默认项（一般是您所需的）。" +msgstr "" #. type: Content of: <section><section><section><title> #: en/installer.xml:97 @@ -2235,11 +1872,10 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:100 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:111 @@ -2250,9 +1886,8 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:117 -#, fuzzy msgid "<emphasis role=\"bold\">Rescue System</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:119 @@ -2263,9 +1898,8 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:132 -#, fuzzy msgid "<emphasis role=\"bold\">F2: Language</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:134 @@ -2287,17 +1921,15 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/installer.xml:148 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome2.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:157 -#, fuzzy msgid "<emphasis role=\"bold\">Install:</emphasis> Start the Install process" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:162 @@ -2309,19 +1941,17 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:169 -#, fuzzy msgid "" "<emphasis role=\"bold\">F2: Language:</emphasis> Press <keycap>F2</keycap> " "for alternative languages." -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><para> #: en/installer.xml:174 -#, fuzzy msgid "" "If you booted from a USB stick, you will see the above options duplicated, " "and in this case, you should use the set that will be suffixed with \"USB\"." -msgstr "若从 U 盘引导，除了以”uSB“结尾的行以外，还会有额外的两行供选择。" +msgstr "" #. type: Content of: <section><section><title> #: en/installer.xml:181 @@ -2335,19 +1965,15 @@ msgstr "不使用图形界面" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:188 -#, fuzzy msgid "" "After the initial screen you did not progress to the <emphasis>Language " "Selection</emphasis> screen. This can happen with some graphic cards and " "older systems. Try using low resolution by typing <command>vgalo</command> " "at the prompt." msgstr "" -"在初始屏幕之后，可能无法显示语言选择窗口。这中情况可能发生在部分显卡和较老的" -"系统中。请尝试在提示后输入 <code>vgalo</code> 来切换到较低分辨率。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/installer.xml:195 -#, fuzzy msgid "" "If the hardware is very old, a graphical installation may not be possible. " "In this case it is worth trying a text-mode installation. To use this press " @@ -2356,9 +1982,6 @@ msgid "" "a <prompt>boot:</prompt> prompt. Type <command>text</command> and press " "<keycap>ENTER</keycap> to continue with the installation in text mode." msgstr "" -"若硬件较老，可能无法使用图形化安装程序。这种情况下，可以尝试文本安装模式：在" -"首个欢迎界面中按 Esc，然后按 Enter。在出现的黑色屏幕中，输入“text”，然后按 " -"Enter，即可进入文本安装模式。" #. type: Content of: <section><section><section><title> #: en/installer.xml:208 @@ -2367,7 +1990,6 @@ msgstr "安装停止" #. type: Content of: <section><section><section><para> #: en/installer.xml:210 -#, fuzzy msgid "" "If the system appeared to freeze during the installation, this may be a " "problem with hardware detection. In this case the automatic hardware " @@ -2375,9 +1997,6 @@ msgid "" "<command>noauto</command> at the prompt. This option may also be combined " "with other parameters as necessary." msgstr "" -"若系统在安装过程中停止响应（卡死），可能是硬件检测过程出现问题。在这种情况" -"下，可以先跳过硬件检测过程：在命令提示后输入 <code>noauto</code>。此选项也可" -"以与其他选项联合使用。" #. type: Content of: <section><section><section><title> #: en/installer.xml:218 @@ -2386,7 +2005,6 @@ msgstr "内存问题" #. type: Content of: <section><section><section><para> #: en/installer.xml:220 -#, fuzzy msgid "" "This will rarely be needed, but in some cases the hardware may report the " "available RAM incorrectly. To specify this manually, you can use the " @@ -2394,9 +2012,6 @@ msgid "" "<replaceable>xxx</replaceable> is the correct amount of RAM. e.g. " "<literal>mem=256M</literal> would specify 256MB of RAM." msgstr "" -"部分情况下，硬件可能无法正确地检测可用 RAM 大小。要手动指定它，可以使用 " -"<code>mem=xxxM</code> 参数，其中 xxx 是 RAM 的总大小。例如，<code>mem=256M</" -"code> 表示 RAM 的大小为 256MB。" #. type: Content of: <section><section><section><title> #: en/installer.xml:228 @@ -2405,7 +2020,6 @@ msgstr "动态分区" #. type: Content of: <section><section><section><para> #: en/installer.xml:230 -#, fuzzy msgid "" "If you converted your hard disk from <literal>Basic</literal> format to " "<literal>Dynamic</literal> format in Microsoft Windows, then it is not " @@ -2414,10 +2028,6 @@ msgid "" "microsoft.com/en-us/library/cc776315.aspx\">http://msdn.microsoft.com/en-us/" "library/cc776315.aspx</link>." msgstr "" -"若您在微软 Windows 中将硬盘从“basic”格式转变为“dynamic”格式，该硬盘将无法用" -"于 Mageia 安装。要将硬盘转变回“basic”格式，请参见微软的文档：<link ns2:href=" -"\"http://msdn.microsoft.com/en-us/library/cc776315.aspx\">http://msdn." -"microsoft.com/en-us/library/cc776315.aspx</link>。" #. type: Content of: <section><info><title> #: en/installUpdates.xml:16 @@ -2426,24 +2036,18 @@ msgstr "更新" #. type: Content of: <section><mediaobject> #: en/installUpdates.xml:20 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"png\" fileref=\"dx2-installUpdates.png\" " "align=\"center\" revision=\"1\" xml:id=\"installUpdates-im1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" " -"align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/installUpdates.xml:25 -#, fuzzy msgid "" "Since this version of Mageia was released, some packages will have been " "updated or improved." msgstr "" -"在此版本的 <application>Mageia</application> 发布之后，一些软件包将会被更新或" -"改善。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:30 @@ -2453,19 +2057,15 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:35 -#, fuzzy msgid "" "Select <emphasis>No</emphasis> if you don't want to do this now, or if you " "aren't connected to the Internet" msgstr "" -"若您希望下载和安装更新后的软件包，请选择 <guilabel>是</guilabel>；若您不希望" -"这样做，或无法连接到互联网，请选择 <guilabel>否</guilabel>。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/installUpdates.xml:40 -#, fuzzy msgid "Press <emphasis>Next</emphasis> to continue" -msgstr "然后按<guibutton>下一步</guibutton>继续" +msgstr "" #. type: Content of: <section><title> #: en/locale.xml:9 @@ -2474,53 +2074,41 @@ msgstr "" #. type: Content of: <section><info><title> #: en/login.xml:4 -#, fuzzy msgid "Login Screen" -msgstr "登录界面" +msgstr "" #. type: Content of: <section><mediaobject> #: en/login.xml:7 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" "login.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" -"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-" -"login.png\" align=\"center\" revision=\"1\"/></imageobject>" #. type: Content of: <section><mediaobject><caption><para> #: en/login.xml:11 -#, fuzzy msgid "SDDM login screen" -msgstr "KDM 登录界面" +msgstr "" #. type: Content of: <section><para> #: en/login.xml:14 -#, fuzzy msgid "Finally, you will come to the desktop login screen." -msgstr "最后，您将会看到登录界面。" +msgstr "" #. type: Content of: <section><para> #: en/login.xml:15 -#, fuzzy msgid "" "Enter your user name and user password, and in a few seconds you will find " "yourself with a loaded KDE Plasma or GNOME desktop, depending on which live " "medium you used. You can now start using and enjoying your Mageia " "installation." msgstr "" -"请输入您的用户名和密码，随后您将看到 KDE 或 GNOME 桌面（根据您所选的安装介质" -"而异）。您现在即可使用 Mageia 系统。" #. type: Content of: <section><para> #: en/login.xml:16 -#, fuzzy msgid "" "You can find further documentation in <link xmlns:ns0=\"http://www.w3." "org/1999/xlink\" ns0:href=\"../../installer/\">the Mageia wiki</link>." msgstr "" -"可以在 <link linkend=\"https://wiki.mageia.org/en/Category:Documentation" -"\">Mageia wiki</link> 中找到有关系统使用的方法。" #. type: Content of: <section><info><title> #: en/media_selection.xml:10 @@ -2564,7 +2152,6 @@ msgstr "<emphasis>Core</emphasis> 仓库无法被禁用，因其包含发行版 #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:44 -#, fuzzy msgid "" "The <emphasis>Nonfree</emphasis> repository includes packages that are free-" "of-charge, i.e. Mageia may redistribute them, but they contain closed-source " @@ -2572,13 +2159,9 @@ msgid "" "nVidia and AMD graphics card proprietary drivers, firmware for various WiFi " "cards, etc." msgstr "" -"<emphasis>Nonfree</emphasis> 仓库包含了免费（因此Mageia可以再分发）、但不开源" -"的软件。例如，此仓库包含 nVidia 和 ATI 的私有显卡驱动、各类 WiFi 网卡的固件" -"等。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/media_selection.xml:52 -#, fuzzy msgid "" "The <emphasis>Tainted</emphasis> repository includes packages released under " "a free license. The main criteria for placing packages in this repository is " @@ -2586,9 +2169,6 @@ msgid "" "multimedia codecs needed to play various audio/video files; packages needed " "to play commercial video DVD's, etc." msgstr "" -"<emphasis>Tainted</emphasis> 仓库包含了在自由许可证下发布的软件。将这些软件包" -"归入 Tainted 仓库是因为它们可能会违反部分国家（地区）的专利或版权法，例如：用" -"于播放音频/视频文件的多媒体解码器，用于播放商业视频 DVD 的软件等。" #. type: Content of: <section><info><title> #: en/minimal-install.xml:3 @@ -2597,7 +2177,6 @@ msgstr "最小安装" #. type: Content of: <section><para> #: en/minimal-install.xml:17 -#, fuzzy msgid "" "Minimal Installation is intended for those with specific uses in mind for " "Mageia, such as a server or a specialised workstation. You will probably use " @@ -2605,39 +2184,29 @@ msgid "" "emphasis> option to fine-tune your installation. See <xref linkend=" "\"choosePackagesTree\"/>." msgstr "" -"最小化安装通常被用于在服务器或特定工作站上安装 Mageia。您可能会将此选项与“独" -"立软件包选择”选项配合使用，以便微调您的安装配置，参见 <xref linkend=" -"\"choosePackagesTree\"></xref>。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:24 -#, fuzzy msgid "" "You can choose a <emphasis>Minimal Installation</emphasis> by de-selecting " "everything in the <emphasis>Package Group Selection</emphasis> screen, see " "<xref linkend=\"choosePackageGroups\"/>." msgstr "" -"在软件包组选择窗口中，您可以通过取消选择所有项来实现最小化安装，参见 <xref " -"linkend=\"choosePackageGroups\"></xref>。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:28 -#, fuzzy msgid "" "If desired, you can additionally tick the <emphasis>Individual package " "selection</emphasis> option in the same screen." -msgstr "若需要，您可以在该窗口中勾选“独立选择软件包”选项。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:33 -#, fuzzy msgid "" "If you choose this installation method, then the relevant screen (see " "screenshot below) will offer you a few useful extras to install, such as " "documentation and <quote>X</quote>." msgstr "" -"若您选择了安装类别，相应的窗口将会为您展示一些额外的有用软件，例如 X 服务的文" -"档。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/minimal-install.xml:37 @@ -2648,7 +2217,6 @@ msgstr "" #. type: Content of: <section><para> #: en/minimal-install.xml:42 -#, fuzzy msgid "" "The basic documentation is provided in the form of <quote>man</quote> and " "<quote>info</quote> pages. It contains the man pages from the <link xlink:" @@ -2656,27 +2224,19 @@ msgid "" "link> and the <link xlink:href=\"http://www.gnu.org/software/coreutils/" "manual/\">GNU coreutils</link> info pages." msgstr "" -"一些基础的文档由 man 和 info 命令提供。其中包含了来自 <link xlink:href=" -"\"http://www.tldp.org/manpages/man.html\">Linux Documentation Project</link> " -"的 man 帮助页和来自 <link xlink:href=\"http://www.gnu.org/software/coreutils/" -"manual/\">GNU coreutils</link> 的 info 帮助页。" #. type: Content of: <section><mediaobject> #: en/minimal-install.xml:48 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"minimal-install-im1\" align=" "\"center\" fileref=\"dx2-minimal-install.png\" revision=\"1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align=" -"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><info><title> #: en/misc-params.xml:3 -#, fuzzy msgid "Configuration Summary" -msgstr "声音配置" +msgstr "" #. Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC #. 2018/02/09 apb: Changed title to Configuration Summary (as agreed). Also, text and typography. @@ -2686,32 +2246,26 @@ msgstr "声音配置" #. 2018/02/24 apb: Centre-align dx2-summaryTop.png #. type: Content of: <section><mediaobject> #: en/misc-params.xml:19 -#, fuzzy msgid "" "<imageobject> <imagedata fileref=\"dx2-summaryTop.png\" align=\"center\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>" #. type: Content of: <section><para> #: en/misc-params.xml:24 -#, fuzzy msgid "" "DrakX presents a proposal for the configuration of your system depending on " "the choices you made and on the hardware detected. You can check the " "settings here and change them if you want by pressing <emphasis>Configure</" "emphasis>." msgstr "" -"DrakX 会根据您的选择以及检测到的硬件自动生成合适的配置。您可以在此处检查或更" -"改它们（点击 <guibutton>配置</guibutton> 按钮）。" #. type: Content of: <section><note><para> #: en/misc-params.xml:30 -#, fuzzy msgid "" "As a general rule, it is recommended that you accept the default settings " "unless:" -msgstr "一般而言，您可以直接使用推荐配置，除非您遇到以下三种情况：" +msgstr "" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:33 @@ -2725,9 +2279,8 @@ msgstr "您尝试了默认配置，但安装失败" #. type: Content of: <section><note><para><itemizedlist><listitem><para> #: en/misc-params.xml:41 -#, fuzzy msgid "some other factor mentioned in the detailed sections below is an issue" -msgstr "后续章节中所提到的其他情况" +msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:49 @@ -2736,95 +2289,76 @@ msgstr "系统参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:54 -#, fuzzy msgid "<emphasis role=\"bold\">Timezone</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:56 -#, fuzzy msgid "" "DrakX selects a timezone for you, depending on your preferred language. You " "can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/>" msgstr "" -"DrakX 根据您的语言设置自动选择了时区。您也可以手动改变时区。参见 <xref " -"linkend=\"configureTimezoneUTC\"/>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:62 -#, fuzzy msgid "<emphasis role=\"bold\">Country / Region</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:64 -#, fuzzy msgid "" "If the selected country is wrong, it is very important that you correct the " "setting. See <xref linkend=\"selectCountry\"/>" msgstr "" -"若您不在所选国家/地区中，请务必对其进行正确设置。参见 <xref linkend=" -"\"selectCountry\"/>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:70 -#, fuzzy msgid "<emphasis role=\"bold\">Bootloader</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:72 -#, fuzzy msgid "DrakX proposal for the bootloader setting" -msgstr "DrakX 为引导器进行了自动设置。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:75 -#, fuzzy msgid "" "Do not change anything, unless you know how to configure GRUB2. For more " "information, see <xref linkend=\"setupBootloader\"/>" -msgstr "除非您懂得如何配置 GRUB 2，否则请勿更改这些配置" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:83 -#, fuzzy msgid "<emphasis role=\"bold\">User management</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:85 -#, fuzzy msgid "" "You can add extra users here. They will each be allocated their own " "<filename>/home</filename> directories." msgstr "" -"您可以在此处添加额外的用户。将会为每个用户在 <literal>/home</literal> 下创建" -"目录。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:91 -#, fuzzy msgid "<emphasis role=\"bold\">Services</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:93 -#, fuzzy msgid "" "System services refer to those small programs which run in the background " "(daemons). This tool allows you to enable or disable certain processes." msgstr "" -"系统服务指在后台运行的小程序（守护进程）。此工具允许您启用或禁用特定任务。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:97 -#, fuzzy msgid "" "You should check carefully before changing anything here - a mistake may " "prevent your computer from operating correctly. For more information, see " "<xref linkend=\"configureServices\"/>" -msgstr "在做出更改之前，请认真审视选项 - 任何错误都可能导致系统无法正常运行。" +msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:106 @@ -2833,17 +2367,15 @@ msgstr "硬件参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:111 -#, fuzzy msgid "<emphasis role=\"bold\">Keyboard</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:113 -#, fuzzy msgid "" "Configure your keyboard layout according to your location, language and type " "of keyboard." -msgstr "在这里，您可以根据您所在的位置、使用的语言和键盘类型来设置键盘布局。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><note><para> #: en/misc-params.xml:118 @@ -2856,9 +2388,8 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:124 -#, fuzzy msgid "<emphasis role=\"bold\">Mouse</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:126 @@ -2869,9 +2400,8 @@ msgstr "您可以添加或配置其他触控设备、平板、轨迹球等。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:131 -#, fuzzy msgid "<emphasis role=\"bold\">Sound card</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:133 @@ -2889,17 +2419,15 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:144 -#, fuzzy msgid "<emphasis role=\"bold\">Graphical interface</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:146 -#, fuzzy msgid "" "This section allows you to configure your graphics card(s) and displays. For " "more information, see <xref linkend=\"configureX_chooser\"/>" -msgstr "您可以在这里配置显卡和显示器。" +msgstr "" #. type: Content of: <section><section><mediaobject> #: en/misc-params.xml:155 @@ -2917,54 +2445,44 @@ msgstr "网络和 Internet 参数" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:169 -#, fuzzy msgid "<emphasis role=\"bold\">Network</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:171 -#, fuzzy msgid "" "You can configure your network here, but for network cards with non-free " "drivers it is better to do that after reboot, using the Mageia Control " "Center, if you have not yet enabled the <emphasis>Nonfree</emphasis> media " "repositories." msgstr "" -"您可以在这里配置网络。若您需要在网卡上使用非自由的驱动程序，并且尚未启用 " -"Nonfree 软件仓库，那么您最好等到重启后再进行这一操作。" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:178 -#, fuzzy msgid "" "When you add a network card, do not forget to set your firewall to monitor " "that interface as well." -msgstr "当您添加了网卡后，请不要忘记用防火墙对该接口进行管理。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:185 -#, fuzzy msgid "<emphasis role=\"bold\">Proxies</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:187 -#, fuzzy msgid "" "A Proxy Server acts as an intermediary between your computer and the wider " "Internet. This section allows you to configure your computer to utilize a " "proxy service." msgstr "" -"代理服务器将作为您的电脑和广域网之间的桥梁。您可以在此处配置您需要使用的代理" -"服务。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:192 -#, fuzzy msgid "" "You may need to consult your systems administrator to obtain the parameters " "you need to enter here." -msgstr "您可能需要咨询系统管理员来获取此处应当填写的参数" +msgstr "" #. type: Content of: <section><section><info><title> #: en/misc-params.xml:201 @@ -2973,24 +2491,21 @@ msgstr "安全" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:206 -#, fuzzy msgid "<emphasis role=\"bold\">Security Level</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:208 -#, fuzzy msgid "" "The Security level for your computer, in most cases the default setting " "(Standard) is adequate for general use. Select the option which best suits " "your usage." -msgstr "您可以在这里设置计算机的安全等级，一般情况下可以使用默认设置（标准）。" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:215 -#, fuzzy msgid "<emphasis role=\"bold\">Firewall</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:217 @@ -3012,17 +2527,15 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/misc-params.xml:229 -#, fuzzy msgid "For more information, see <xref linkend=\"firewall\"/>." -msgstr "更多信息，参见 <xref linkend=\"configureX_chooser\"/>." +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><warning><para> #: en/misc-params.xml:232 -#, fuzzy msgid "" "Bear in mind that allowing <emphasis>everything</emphasis> (no firewall) may " "be very risky." -msgstr "请牢记：允许所有服务（即不启用防火墙）是非常危险的。" +msgstr "" #. type: Content of: <section><info><title> #: en/reboot.xml:3 @@ -3031,14 +2544,10 @@ msgstr "重新启动" #. type: Content of: <section><para> #: en/reboot.xml:7 -#, fuzzy msgid "" "Once the bootloader has been installed, you will be prompted to halt your " "computer, remove the live DVD/USB stick and restart the computer." msgstr "" -"一旦安装了引导器，安装程序将会提示您重启电脑，此时请移除 Live CD 并重启。请点" -"击<emphasis role=\"bold\"><guibutton>完成</guibutton></emphasis>并<emphasis " -"role=\"bold\">根据提示的步骤</emphasis>进行操作。" #. type: Content of: <section><important><simpara> #: en/reboot.xml:9 @@ -3049,11 +2558,10 @@ msgstr "" #. type: Content of: <section><mediaobject> #: en/reboot.xml:12 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-reboot2.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><simpara> #: en/reboot.xml:16 @@ -3062,14 +2570,11 @@ msgstr "" #. type: Content of: <section><simpara> #: en/reboot.xml:17 -#, fuzzy msgid "" "When you restart, you will see a succession of download progress bars. These " "indicate that the software media lists are being downloaded (see " "<emphasis>Software Management</emphasis>)." msgstr "" -"重启后，您将会看到一系列下载进度条，它将提示您正在下载的软件媒体（参见“软件管" -"理”）。" #. type: Content of: <section><mediaobject> #: en/reboot.xml:19 @@ -3110,20 +2615,16 @@ msgstr "安全级别" #. 2018/02/12 apb: Minor wording. #. type: Content of: <section><mediaobject> #: en/securityLevel.xml:20 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-securityLevel.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"securityLevel-im1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" " -"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/securityLevel.xml:26 -#, fuzzy msgid "" "<emphasis role=\"bold\">Please choose the desired security level</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:29 @@ -3141,9 +2642,8 @@ msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:36 -#, fuzzy msgid "<emphasis role=\"bold\">Security Administrator</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:38 @@ -3170,13 +2670,10 @@ msgstr "" #. type: Content of: <section><para> #: en/securityLevel.xml:53 -#, fuzzy msgid "" "It will always be possible to adjust your security settings post-install in " "the <emphasis>Security</emphasis> section of the Mageia Control Center." msgstr "" -"在安装之后，您也可以在 Mageia 控制中心中的 <guilabel>安全</guilabel> 选项卡里" -"调整安全设置。" #. type: Content of: <section><info><title> #: en/SelectAndUseISOs2.xml:15 @@ -3190,29 +2687,24 @@ msgstr "简介" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:19 -#, fuzzy msgid "" "Mageia is distributed via ISO images. This page will help you to choose " "which image best suits your needs." -msgstr "Mageia 通过 ISO 镜像进行分发。此页将帮助您选择所需的镜像。" +msgstr "" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:21 -#, fuzzy msgid "There are three types of installation media:" -msgstr "有两种类型的媒介：" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:24 -#, fuzzy msgid "" "<emphasis role=\"bold\">Classical installer:</emphasis> Booting with this " "media provides you with the maximum flexibility when choosing what to " "install, and for configuring your system. In particular, you have a choice " "of which Desktop environment to install." msgstr "" -"传统安装器：在引导之后，程序将提供一系列用于安装和配置目标系统的选项。这种安" -"装类型可以给予您最大限度的灵活性，尤其是选择所需安装的桌面环境。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:31 @@ -3233,17 +2725,13 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><important><para> #: en/SelectAndUseISOs2.xml:41 -#, fuzzy msgid "" "Live ISOs can only be used to create <quote>clean</quote> installations, " "they cannot be used to upgrade previously installed Mageia releases." msgstr "" -"<emphasis role=\"bold\">Live ISO 仅能用于全新安装，而无法对之前的版本进行升" -"级。</emphasis>" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:47 -#, fuzzy msgid "" "<emphasis role=\"bold\">Net Install</emphasis>: These are minimal ISO's " "containing no more than that which is needed to start the DrakX installer " @@ -3251,26 +2739,19 @@ msgid "" "are needed to continue and complete the install. These packages may be on " "the PC hard disk, on a local drive, on a local network or on the Internet." msgstr "" -"此类媒介仅包含启动 drakx 安装器和查找 drakx-installer-stage2 等软件包所必须的" -"程序，因此非常轻巧。用于后续安装的软件包可以位于电脑硬盘、本地驱动器、本地网" -"络或互联网。" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:53 -#, fuzzy msgid "" "These media are very light (less than 100 MB) and are convenient if " "bandwidth is too low to download a full DVD, or if you have a PC without a " "DVD drive or is unable to boot from a USB stick." msgstr "" -"这类媒介非常小巧（小于 100 MB），适用于不方便下载完整版 DVD、没有 DVD 驱动器" -"或不支持 USB 引导的电脑。" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:58 -#, fuzzy msgid "More details are given in the next sections." -msgstr "下一节中将涉及有关细节。" +msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:61 @@ -3284,23 +2765,18 @@ msgstr "定义" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:64 -#, fuzzy msgid "" "Here, a medium (plural: media) is an ISO image file that allows you to " "install and/or update Mageia and, by extension, any physical medium (DVD, " "USB stick, ...) the ISO file is copied to." msgstr "" -"媒介：是一类承载 ISO 文件、可以用于安装和/或更新 Mageia 的任意物理介质。" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:67 -#, fuzzy msgid "" "You can find Mageia ISO's <link ns4:href=\"http://www.mageia.org/en/" "downloads/\">here</link>." msgstr "" -"您可以在<link ns4:href=\"http://www.mageia.org/en/downloads/\">这里</link>找" -"到它们。" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:70 @@ -3315,46 +2791,40 @@ msgstr "通用特性" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:75 -#, fuzzy msgid "These ISOs use the Classical installer called DrakX" -msgstr "这些 ISO 使用传统的安装器（drakx）。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:78 -#, fuzzy msgid "" "They are used for performing clean installs or to upgrade a previously " "installed version of Mageia" -msgstr "它们可以用于全新安装，或更新之前的版本。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:82 en/SelectAndUseISOs2.xml:118 #: en/SelectAndUseISOs2.xml:174 -#, fuzzy msgid "Different media for 32 and 64-bit architectures" -msgstr "媒介有 32 位和 64 位两种架构之分。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:85 -#, fuzzy msgid "" "Some tools are available in the Installer <quote>Welcome</quote> screen: " "<emphasis>Rescue System, Memory Test, </emphasis>and <emphasis>Hardware " "Detection Tool</emphasis>" -msgstr "欢迎屏幕中列出了一些可用的工具，如：救援系统、内存测试、硬件检测工具。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:91 -#, fuzzy msgid "Each DVD contains many available desktop environments and languages" -msgstr "每个 DVD 中包含多种桌面环境和语言支持。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:95 -#, fuzzy msgid "" "You'll be given the choice during the installation to add non-free software" -msgstr "您可以在安装时添加非自由软件。" +msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:102 @@ -3363,12 +2833,10 @@ msgstr "Live 媒介" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:107 -#, fuzzy msgid "" "Can be used to preview the Mageia operating system without having to install " "it" msgstr "" -"可以用于预览该发行版，而无需将其安装到硬盘上。也可以用于安装 Mageia 至硬盘。" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:111 @@ -3377,15 +2845,13 @@ msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:114 -#, fuzzy msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)" -msgstr "每个 ISO 仅包含一种桌面环境（KDE Plasma、GNOME 或 Xfce）。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:121 -#, fuzzy msgid "They contain non-free software" -msgstr "其中包含非自由软件。" +msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:126 @@ -3394,22 +2860,19 @@ msgstr "Live DVD KDE" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:129 -#, fuzzy msgid "Plasma desktop environment only" -msgstr "仅包含 KDE（Plasma）桌面环境。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:132 en/SelectAndUseISOs2.xml:146 #: en/SelectAndUseISOs2.xml:160 -#, fuzzy msgid "All available languages are present" -msgstr "包含所有语言支持。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:135 en/SelectAndUseISOs2.xml:149 -#, fuzzy msgid "64-bit architecture only" -msgstr "仅支持 64 位处理器" +msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:140 @@ -3418,9 +2881,8 @@ msgstr "Live DVD GNOME" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:143 -#, fuzzy msgid "GNOME desktop environment only" -msgstr "仅包含 GNOME 桌面环境。" +msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:154 @@ -3429,27 +2891,23 @@ msgstr "Live DVD Xfce" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:157 -#, fuzzy msgid "Xfce desktop environment only" -msgstr "仅包含 Xfce 桌面环境。" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:163 -#, fuzzy msgid "32 or 64-bit architectures" -msgstr "同时支持 32 位和 64 位处理器。" +msgstr "" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:169 -#, fuzzy msgid "Net install media" -msgstr "netinstall.iso" +msgstr "" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:177 -#, fuzzy msgid "First steps are English language only" -msgstr "仅包含英语支持。" +msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:182 @@ -3458,11 +2916,10 @@ msgstr "netinstall.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:185 -#, fuzzy msgid "" "Contains only free software, for those who prefer to not use non-free " "software" -msgstr "仅包含自由软件，适用于不希望使用非自由软件的人。" +msgstr "" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:191 @@ -3471,10 +2928,9 @@ msgstr "netinstall-nonfree.iso" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:194 -#, fuzzy msgid "" "Contains non-free software (mostly drivers, codecs...) for those who need it" -msgstr "包含部分用户所需的非自由软件（主要为驱动、编码器）。" +msgstr "" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:202 @@ -3488,16 +2944,12 @@ msgstr "下载中" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:205 -#, fuzzy msgid "" "Once you have chosen your ISO file, you can download it using either http or " "BitTorrent. In both cases, you are provided with some information, such as " "the mirror in use and an option to switch to an alternative if the bandwidth " "is too low." msgstr "" -"在选择了 ISO 文件后，您可以通过 HTTP 或 BitTorrent 下载它。相应的窗口中将会提" -"示您正在使用的镜像源，并在速度太慢时提醒您更换镜像源。若您使用 HTTP 方式下" -"载，您可能会看到类似下列情形" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:209 @@ -3516,11 +2968,10 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:217 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Checking.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:222 @@ -3529,11 +2980,10 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:225 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Download.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:229 @@ -3548,7 +2998,6 @@ msgstr "检查下载文件的完整性" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:235 -#, fuzzy msgid "" "The checksums referred to earlier, are digital fingerprints generated by an " "algorithm from the file to be downloaded. You may compare the checksum of " @@ -3557,47 +3006,33 @@ msgid "" "match, and if that is the case, then you should retry the download or " "attempt a repair using BitTorrent." msgstr "" -"这两种校验和均由特定算法计算文件内容产生，且均为十六进制数字。当您使用这些算" -"法来重新计算下载文件的校验值时，如果您得到的结果和 Mageia 提供的一致，说明您" -"的文件没有问题；否则，说明下载失败，您可能需要重新下载，或改用 BitTorrent 下" -"载。" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:241 -#, fuzzy msgid "" "To generate the checksum for your downloaded ISO, open a console, (no need " "to be root), and:" -msgstr "打开一个终端（无需以 root 身份操作），然后：" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:245 -#, fuzzy msgid "" "To use the md5sum, type: <command>md5sum path/to/the/image/file.iso</command>" msgstr "" -"- 若使用 md5sum，请输入：[sam@localhost]$ <userinput>md5sum path/to/the/" -"image/file.iso</userinput>。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:249 -#, fuzzy msgid "" "To use the sha1sum, type: <command>sha1sum path/to/the/image/file.iso</" "command>" msgstr "" -"- 若使用 sha1sum，请输入：[sam@localhost]$ <userinput>sha1sum path/to/the/" -"image/file.iso</userinput>。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:254 -#, fuzzy msgid "" "To use the sha512sum, type: <command>sha512sum path/to/the/image/file.iso</" "command>" msgstr "" -"- 若使用 sha1sum，请输入：[sam@localhost]$ <userinput>sha1sum path/to/the/" -"image/file.iso</userinput>。" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:258 @@ -3606,20 +3041,17 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/SelectAndUseISOs2.xml:260 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Md5sum.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:265 -#, fuzzy msgid "" "then compare the result (you may have to wait for a while) with the ISO " "checksum provided by Mageia." msgstr "" -"然后比较执行结果（可能需要等待一段时间）和 Mageia 网上提供的数值。例如：" #. type: Content of: <section><section><title> #: en/SelectAndUseISOs2.xml:270 @@ -3628,14 +3060,11 @@ msgstr "刻录或转储 ISO" #. type: Content of: <section><section><para> #: en/SelectAndUseISOs2.xml:271 -#, fuzzy msgid "" "The verified ISO can now be burned to a CD/DVD or <quote>dumped</quote> to a " "USB stick. This is not a standard copy operation, as a bootable medium will " "actually be created." msgstr "" -"经过检查后的 ISO 即可被刻录至 CD/DVD，或写入到 U 盘。这些操作不同于简单的复" -"制，其目的是创建一个可引导的媒体。" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:275 @@ -3644,16 +3073,12 @@ msgstr "将ISO文件刻录到CD或DVD" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:276 -#, fuzzy msgid "" "Whichever software you use, ensure that the option to burn an<emphasis> " "image</emphasis> is used. Burn <emphasis>data</emphasis> or <emphasis>files</" "emphasis> is NOT correct. See the <link ns4:href=\"https://wiki.mageia.org/" "en/Writing_CD_and_DVD_images\">the Mageia wiki</link> for more information." msgstr "" -"您可以刻录任何所需镜像，但请确保刻录设备的模式被设为<emphasis role=\"bold\">" -"刻录镜像</emphasis>，而非刻录数据或文件。更多信息请见 <link ns4:href=" -"\"https://wiki.mageia.org/en/Writing_CD_and_DVD_images\">Mageia wiki</link>。" #. type: Content of: <section><section><section><title> #: en/SelectAndUseISOs2.xml:282 @@ -3662,23 +3087,17 @@ msgstr "写入 ISO 到 U 盘" #. type: Content of: <section><section><section><para> #: en/SelectAndUseISOs2.xml:283 -#, fuzzy msgid "" "All Mageia ISOs are hybrids, which means you can dump them to a USB stick " "and then use that to boot and install the system." msgstr "" -"所有的 Mageia ISO 均为混合类型 ISO，因此您可以将其“转储”到 U 盘中，然后使用 " -"U 盘来引导和安装系统。" #. type: Content of: <section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:286 -#, fuzzy msgid "" "Dumping an image onto a flash device destroys any previous file-system on " "the device and all existing data will be lost." msgstr "" -"“转储”镜像至闪存设备将会破坏设备上原先的文件系统，任何数据都将丢失，并且分区" -"容量将会（暂时）缩减为镜像大小。" #. type: Content of: <section><section><section><note><para> #: en/SelectAndUseISOs2.xml:290 @@ -3723,39 +3142,29 @@ msgstr "您可以尝试：" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:307 -#, fuzzy msgid "" "<link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using the " "\"ISO image\" option" msgstr "" -"- <link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> 中" -"的“ISO 镜像”选项；" #. type: Content of: <section><section><section><section><itemizedlist><listitem><para> #: en/SelectAndUseISOs2.xml:311 -#, fuzzy msgid "" "<link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " "Disk Imager</link>" msgstr "" -"- <link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 " -"Disk Imager</link>" #. type: Content of: <section><section><section><section><title> #: en/SelectAndUseISOs2.xml:317 -#, fuzzy msgid "Using the Command line within a GNU/Linux system" -msgstr "使用 GNU/Linux 系统中的命令行程序" +msgstr "" #. type: Content of: <section><section><section><section><warning><para> #: en/SelectAndUseISOs2.xml:319 -#, fuzzy msgid "" "It is potentially *dangerous* to do this by hand. You risk overwriting " "potentially valuable existing data if you specify the wrong target device." msgstr "" -"手动进行此操作有潜在 *危险*。如果您弄错了设备 ID，可能会覆盖掉其他分区中的数" -"据。" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:325 @@ -3764,64 +3173,52 @@ msgstr "打开一个终端" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:328 -#, fuzzy msgid "" "Become a <emphasis>root</emphasis> (Administrator) user with the command " "<command>su -</command> (don't forget the <command>-</command> )" msgstr "" -"使用命令 <userinput>su -</userinput> 获取 root 权限（不要漏掉末尾的“-”）" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:332 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Root.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:338 -#, fuzzy msgid "" "Plug in your USB stick - but do not mount it (this also means do not open " "any application or file manager that could access or read it)" -msgstr "插入您的 U 盘（无需挂载，并且不要用任何应用程序或文件管理器访问它）" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:343 -#, fuzzy msgid "Enter the command <command>fdisk -l</command>" -msgstr "输入命令 <userinput>fdisk -l</userinput>" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject> #: en/SelectAndUseISOs2.xml:345 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"Fdisk.png\"/> </" "imageobject>" -msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:351 -#, fuzzy msgid "" "Find the device name for your USB stick (by its size), for example " "<filename>/dev/sdb</filename> in the screenshot above, is an 8GB USB stick." msgstr "" -"通过磁盘大小来确认您的 U 盘的设备名，例如图中所示的 <code>/dev/sdb</code>，是" -"一个 8GB 的 U 盘。" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:354 -#, fuzzy msgid "" "Alternatively, you can find the device name with the command <command>dmesg</" "command>. Towards the end of the following example, you can see the device " "name starting with <filename>sd</filename>, and in this case, <filename>sdd</" "filename> is the actual device. You can also see that its size is 2GB:" msgstr "" -"或者，您也可以通过命令 <code>dmesg</code> 来查看设备名：在输入末尾，您将看到" -"以 <emphasis>sd</emphasis> 开头的设备名，如 <emphasis>sdd</emphasis>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para><screen> #: en/SelectAndUseISOs2.xml:360 @@ -3867,36 +3264,29 @@ msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:360 -#, fuzzy msgid "<placeholder type=\"screen\" id=\"0\"/>" -msgstr "<placeholder type=\"info\" id=\"0\"/>" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:380 -#, fuzzy msgid "" "Enter the command: <command>dd if=path/to/the/ISO/file of=/dev/" "sd<replaceable>X</replaceable> bs=1M</command>" msgstr "" -"输入命令：# <userinput>dd if=ISO文件的完整路径 of=/dev/sdX bs=1M</userinput>" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:382 -#, fuzzy msgid "" "Where <replaceable>X</replaceable>=your device name eg: <filename>/dev/sdd</" "filename>" -msgstr "其中，“X”是您的设备名（如：/dev/sdc）" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:384 -#, fuzzy msgid "" "Example:<literal> dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/dev/" "sdd bs=1M</literal>" msgstr "" -"示例：# <userinput>dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/" -"dev/sdb bs=1M</userinput>" #. type: Content of: <section><section><section><section><orderedlist><listitem><tip><para> #: en/SelectAndUseISOs2.xml:388 @@ -3910,9 +3300,8 @@ msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:392 -#, fuzzy msgid "Enter the command: <command>sync</command>" -msgstr "输入命令：# <userinput>sync</userinput>" +msgstr "" #. type: Content of: <section><section><section><section><orderedlist><listitem><para> #: en/SelectAndUseISOs2.xml:395 @@ -3938,35 +3327,26 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectCountry.xml:20 -#, fuzzy msgid "" "Select your country or region. This is important for all kinds of settings, " "like the currency and wireless regulatory domain. Setting the wrong country " "can lead to being unable to use a Wireless network." msgstr "" -"请选择您所在的国家或地区。此选项将影响货币设置和无线管理域设置。如果您设置了" -"错误的国家，您可能无法正常使用无线网络。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectCountry.xml:27 -#, fuzzy msgid "" "If your country isn't in the list, click the <emphasis>Other Countries</" "emphasis> option and choose your country / region there." msgstr "" -"若列表中不包含您的国家，请点击 <guilabel>其他国家</guilabel> 按钮并选择相应的" -"国家/区域。" #. type: Content of: <section><note><para> #: en/selectCountry.xml:34 -#, fuzzy msgid "" "If your country is only in the <emphasis>Other Countries</emphasis> list, " "after clicking <emphasis>OK</emphasis> it may seem that a country from the " "main list was chosen. Despite this, DrakX will actually apply your choice." msgstr "" -"若您的国家仅在 <guilabel>其他国家</guilabel> 列表中列出，在点击 <guibutton>确" -"定</guibutton> 按钮之后，请忽略前一个列表中的选项。DrakX 会应用您后来的选择。" #. type: Content of: <section><section><info><title> #: en/selectCountry.xml:42 @@ -3975,7 +3355,6 @@ msgstr "输入法" #. type: Content of: <section><section><para> #: en/selectCountry.xml:45 -#, fuzzy msgid "" "In the <emphasis>Other Countries</emphasis> screen you can also select an " "input method (at the bottom of the list). Input methods allow users to input " @@ -3984,22 +3363,15 @@ msgid "" "Other input methods (SCIM, GCIN, HIME, etc) also provide similar functions " "and can be installed if you added HTTP/FTP media before package selection." msgstr "" -"在 <guilabel>其他国家</guilabel> 窗口中，您也可以选择一种输入法（位于列表底" -"部）。输入法用于输入各类语言中的字符（中文、日文、韩文等）。IBus 是默认选项，" -"一般情况下用户无需手动配置。其他输入法（SCIM、GCIN、HIME 等）可以提供类似的功" -"能，您可以在选择软件包前通过添加 HTTP/FTP 媒体来安装它们。" #. type: Content of: <section><section><note><para> #: en/selectCountry.xml:54 -#, fuzzy msgid "" "If you missed the input method setup during installation, you can access it " "post-install via <menuchoice> <guimenu>Configure your Computer</guimenu> " "<guimenuitem>System</guimenuitem> </menuchoice>, or by running " "<command>localedrake</command> as <emphasis>root</emphasis>." msgstr "" -"若您在安装期间缺少输入法，您可以在安装完成后通过“配置我的电脑”->“系统”设置来" -"安装输入法，或者以 root 身份运行 localedrake。" #. type: Content of: <section><info><title> #: en/selectInstallClass.xml:29 @@ -4008,19 +3380,15 @@ msgstr "新安装或升级" #. type: Content of: <section><mediaobject> #: en/selectInstallClass.xml:33 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectInstallClass." "png\" format=\"PNG\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" -"\" /> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:41 -#, fuzzy msgid "<emphasis role=\"bold\">Install</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:43 @@ -4034,19 +3402,16 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:50 -#, fuzzy msgid "<emphasis role=\"bold\">Upgrade</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectInstallClass.xml:52 -#, fuzzy msgid "Use this option to upgrade an existing installation of Mageia." -msgstr "使用此选项来进行全新 <application>Mageia</application> 安装。" +msgstr "" #. type: Content of: <section><important><para> #: en/selectInstallClass.xml:58 -#, fuzzy msgid "" "Only upgrading from a previous Mageia version that was <emphasis>still " "supported</emphasis> when this Installer's version was released, has been " @@ -4055,13 +3420,9 @@ msgid "" "quote> install instead, while preserving your <filename>/home</filename> " "partition." msgstr "" -"我们只测试了从当前 <emphasis>尚被支持</emphasis>的发行版进行的升级过程。如果" -"您希望从已经结束支持的 Mageia 版本升级到最新版本，我们建议您最好进行全新安" -"装，同时保留您的 <literal>/home</literal> 分区。" #. type: Content of: <section><tip><para> #: en/selectInstallClass.xml:67 -#, fuzzy msgid "" "If you have discovered that you forgot to select an additional language, you " "can return from the <emphasis>Install or Upgrade</emphasis> screen to the " @@ -4069,26 +3430,19 @@ msgid "" "<keycap>Alt</keycap> <keycap>Home</keycap> </keycombo>. Do<emphasis role=" "\"bold\"> NOT</emphasis> do this later in the install." msgstr "" -"若您忘记选择某一附加语言，您可以回到“安装或升级”界面，然后按下来 " -"<guilabel>Alt Ctrl Home</guilabel> 并进行选择。请<emphasis>不要</emphasis>在" -"安装后再进行添加。" #. type: Content of: <section><info><title> #: en/selectKeyboardLive.xml:14 -#, fuzzy msgid "Select Keyboard" -msgstr "选择键盘" +msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboardLive.xml:18 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-selectKeyboard.png" "\" format=\"PNG\" revision=\"1\" xml:id=\"selectKeyboardLive-im1\"/> </" "imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" -"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/selectKeyboardLive.xml:24 @@ -4118,13 +3472,10 @@ msgstr "" #. type: Content of: <section><mediaobject> #: en/selectKeyboard.xml:28 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\"/" "> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" -"\" /> </imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:35 @@ -4143,17 +3494,13 @@ msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:45 -#, fuzzy msgid "" "If your keyboard isn't in the list shown, click on <emphasis>More</emphasis> " "to get a fuller list, and select your keyboard there." msgstr "" -"若列表中没有您的键盘，请点击 <guibutton>更多</guibutton> 来查看完整列表，并选" -"择相应的键盘种类。" #. type: Content of: <section><itemizedlist><listitem><para><note><para> #: en/selectKeyboard.xml:50 -#, fuzzy msgid "" "After choosing a keyboard from the <emphasis>More</emphasis> dialogue, " "you'll return to the first keyboard choice dialogue and it will seem as " @@ -4161,19 +3508,14 @@ msgid "" "and continue the installation: the keyboard chosen from the full list will " "be applied." msgstr "" -"在点击 <guibutton>确定</guibutton> 按钮之后，请忽略前一个列表中的选项。DrakX " -"会应用您后来的选择。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectKeyboard.xml:60 -#, fuzzy msgid "" "If you choose a keyboard based on non-Latin characters, you will see an " "extra dialogue screen asking how you would prefer to switch between the " "Latin and non-Latin keyboard layouts" msgstr "" -"若您选择了基于非拉丁字符的键盘布局，之后您将会看到有关切换拉丁/非拉丁键盘布局" -"的提示窗口。" #. type: Content of: <section><info><title> #: en/selectLanguage.xml:34 @@ -4182,92 +3524,69 @@ msgstr "请选择要使用的语言" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:39 -#, fuzzy msgid "" "Select your preferred language, by first expanding the list for your " "continent. Mageia will use this selection during the installation and for " "your installed system." msgstr "" -"请在地区列表中选择您的首选语言。<application>Mageia</application> 将会在之后" -"的安装过程中使用该语言。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:45 -#, fuzzy msgid "" "Select your preferred language. Mageia will use this selection during the " "installation and for your installed system." msgstr "" -"请在地区列表中选择您的首选语言。<application>Mageia</application> 将会在之后" -"的安装过程中使用该语言。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:50 -#, fuzzy msgid "" "If it is likely that you (or others) will require several languages to be " "installed on your system, then you should use the <emphasis>Multiple " "languages</emphasis> option to add them now. It will be difficult to add " "extra language support after installation." msgstr "" -"若您需要在系统中安装多种语言（为您和其他用户），请现在点击<guibutton>多语言</" -"guibutton>按钮来添加语言。完成安装后添加额外语言是相对困难的。" #. type: Content of: <section><mediaobject> #: en/selectLanguage.xml:58 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-language.png" "\" format=\"PNG\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" -"\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </" -"imageobject>" #. type: Content of: <section><important><para> #: en/selectLanguage.xml:68 -#, fuzzy msgid "" "Even if you choose more than one language, you must first choose one as your " "preferred language from the main list of languages. It will also be marked " "as chosen in the <emphasis>Multiple languages</emphasis> screen." msgstr "" -"如果您选择了多种语言，必须同时选择其中一种作为您的首选语言（在前一个语言选择" -"界面中），该语言会同时出现在多语言配置界面中。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:76 -#, fuzzy msgid "" "If your keyboard language is not the same as your preferred language, then " "it is advisable to install the required language for your keyboard as well" -msgstr "若您的键盘输入语言与首选语言不同，最好也同时安装该输入语言。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:82 -#, fuzzy msgid "" "Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the " "<emphasis>Multiple languages</emphasis> screen if you know that it is " "inappropriate for your language. Disabling UTF-8 applies to all installed " "languages." msgstr "" -"若您认为这不适合您的语言，可以在“多语言”界面中将其禁用。该操作将应用到所有安" -"装的语言。" #. type: Content of: <section><itemizedlist><listitem><para> #: en/selectLanguage.xml:89 -#, fuzzy msgid "" "You can change the language for your system post-installation in the " "<menuchoice> <guimenu>Mageia Control Center</guimenu> <guimenuitem>System</" "guimenuitem> <guimenuitem>localization for your system</guimenuitem> </" "menuchoice>." msgstr "" -"您可以在安装完成后，在 Mageia 控制中心 -> 系统 -> 管理本地化 中改变系统语言。" #. type: Content of: <section><info><title> #: en/selectMouse.xml:10 @@ -4281,13 +3600,10 @@ msgstr "选择鼠标" #. 2018/02/15 apb: Text and typography. #. type: Content of: <section><mediaobject> #: en/selectMouse.xml:24 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectMouse.png\" " "format=\"PNG\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png" -"\" /> </imageobject>" #. type: Content of: <section><para> #: en/selectMouse.xml:29 @@ -4298,24 +3614,18 @@ msgstr "若您对鼠标的响应速度不满意，可以在这里进行调整。 #. type: Content of: <section><para> #: en/selectMouse.xml:32 -#, fuzzy msgid "" "Usually, <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Any PS/2 and " "USB mice</guimenuitem> </menuchoice> is a good choice." msgstr "" -"一般而言，<guilabel>通用</guilabel> - <guilabel>任意 PS/2 和 USB 鼠标</" -"guilabel>可以满足大多数需求。" #. type: Content of: <section><para> #: en/selectMouse.xml:38 -#, fuzzy msgid "" "Select <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Force evdev</" "guimenuitem> </menuchoice> to configure the buttons that do not work on a " "mouse with six or more buttons." msgstr "" -"选择 <guilabel>通用</guilabel> - <guilabel>强制 evdev</guilabel> 可用于配置超" -"过五键的鼠标。" #. type: Content of: <section><info><title> #: en/setupBootloaderAddEntry.xml:7 @@ -4324,30 +3634,23 @@ msgstr "添加或修改引导菜单项" #. type: Content of: <section><para> #: en/setupBootloaderAddEntry.xml:11 -#, fuzzy msgid "" "To do this you need to manually edit /boot/grub2/custom.cfg or use the " "software <emphasis role=\"bold\">grub-customizer</emphasis> tool instead " "(available in the Mageia repositories)." msgstr "" -"为此，您需要手动编辑 /boot/grub2/custom.cfg，或者使用 grub-customizer（可以" -"从 Mageia 仓库中安装）来编辑引导项。" #. type: Content of: <section><note><para> #: en/setupBootloaderAddEntry.xml:16 -#, fuzzy msgid "" "For more information, see: <link ns2:href=\"https://wiki.mageia.org/en/Grub2-" "efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</link>" msgstr "" -"有关更多信息，请参考我们的 wiki：<link ns2:href=\"https://wiki.mageia.org/en/" -"Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</link>" #. type: Content of: <section><info><title> #: en/setupBootloader.xml:27 -#, fuzzy msgid "Bootloader" -msgstr "引导器界面" +msgstr "引导程序" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:31 @@ -4356,29 +3659,25 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><title> #: en/setupBootloader.xml:34 -#, fuzzy msgid "Grub2 on Legacy MBR/GPT systems" -msgstr "GRUB2，当使用传统硬件 + MBR/GPT 格式分区时" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:37 -#, fuzzy msgid "" "GRUB2 (with or without graphical menu) will be used exclusively as the " "bootloader for a Legacy/MBR or Legacy/GPT system." -msgstr "GRUB2（包含/不包含图形界面），当使用传统硬件 + MBR/GPT格式分区时" +msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:42 -#, fuzzy msgid "" "By default, a new bootloader will be written into either the MBR (Master " "Boot Record) of your first hard drive or in the BIOS boot partition." -msgstr "GRUB 2 引导器安装至 MBR（主引导记录）区域或第一硬盘的 BIOS 引导分区。" +msgstr "" #. type: Content of: <section><section><itemizedlist><title> #: en/setupBootloader.xml:49 -#, fuzzy msgid "Grub2-efi on UEFI systems" msgstr "GRUB2-efi，当使用 UEFI 硬件时" @@ -4396,7 +3695,6 @@ msgstr "" #. type: Content of: <section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:60 -#, fuzzy msgid "" "If there are already UEFI-based operating systems installed on your computer " "(Windows 8 for example), the Mageia installer will detect the existing ESP " @@ -4404,17 +3702,11 @@ msgid "" "be created. Although it is possible to have several ESPs, only one is " "required, whatever the number of operating systems you have." msgstr "" -"如果 Mageia 是您在电脑上安装的第一个系统，安装程序将自动创建一个 ESP（EFI 系" -"统分区）来容纳引导器（Grub2-efi）。如果已安装了其他 UEFI 操作系统（例如 " -"Windows 8），Mageia 安装器将会探测现存的（由 Windows 创建的） ESP，并添加 " -"grub2-efi。尽管多个 ESP 可以共存，但只需一个 ESP 即可满足启动所有操作系统的需" -"求。" #. type: Content of: <section><section><info><title> #: en/setupBootloader.xml:72 -#, fuzzy msgid "Bootloader Setup" -msgstr "引导器界面" +msgstr "" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:76 @@ -4423,23 +3715,17 @@ msgstr "引导程序的主要选项" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:79 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata fileref=\"live-setupBootloader.png\" xml:id=\"setupBootloader-" "im1\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"setupBootloader3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-setupBootloader3.png\" align=" -"\"center\"/> </imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:91 -#, fuzzy msgid "<emphasis role=\"bold\">Bootloader to use</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:93 @@ -4450,42 +3736,34 @@ msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:98 -#, fuzzy msgid "<emphasis role=\"bold\">Boot device</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:100 -#, fuzzy msgid "Don't change this unless you really know what you are doing" -msgstr "只有在您完全了解您的行为的风险后再作出改动。" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:105 -#, fuzzy msgid "" "<emphasis role=\"bold\">Delay before booting the default image</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:108 -#, fuzzy msgid "" "This text box lets you set a delay, in seconds, before the default operating " "system is started up." msgstr "" -"<guilabel>自动引导之前等待</guilabel>：此文本框用于设置在等待多少秒之后自动进" -"入默认选定的操作系统。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:113 -#, fuzzy msgid "<emphasis role=\"bold\">Security</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:115 -#, fuzzy msgid "" "This allows you to set a password for the bootloader. This means a username " "and password will be required when booting in order to select a booting " @@ -4493,46 +3771,36 @@ msgid "" "to have a need for it. The username is <literal>root</literal> and the " "password is the one chosen hereafter." msgstr "" -"<guilabel>安全</guilabel>：用于设置引导器的密码。可以防止其他人进入单用户模" -"式，或者修改引导参数。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:126 -#, fuzzy msgid "Choose a password for the bootloader (optional)" -msgstr "<guilabel>密码</guilabel>：此文本框用于输入密码" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:130 -#, fuzzy msgid "<emphasis role=\"bold\">Password (again)</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:132 -#, fuzzy msgid "" "Retype the password and DrakX will check that it matches with the one set " "above" msgstr "" -"<guilabel>确认密码</guilabel>：再次输入密码，安装程序将检查您两次输入的密码是" -"否一致。" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:137 en/setupBootloader.xml:212 -#, fuzzy msgid "<emphasis>Advanced</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:141 -#, fuzzy msgid "<emphasis>Enable ACPI</emphasis>" -msgstr "<emphasis>通用</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:143 -#, fuzzy msgid "" "ACPI (Advanced Configuration and Power Interface) is a standard for power " "management. It can save energy by stopping unused devices. Deselecting it " @@ -4540,160 +3808,119 @@ msgid "" "you think the ACPI implementation might cause some problems (for instance " "random reboots or system lockups)." msgstr "" -"ACPI（高级配置与电源接口）是标准的电源管理协议。它可以关闭未使用的设备以节" -"能，用于取代 APM。如果您的硬件不兼容 ACPI，或者您认为 ACPI 会造成某些问题（如" -"偶尔会自动重启，或系统卡死），则可以取消勾选它。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:152 -#, fuzzy msgid "<emphasis>Enable SMP</emphasis>" -msgstr "<emphasis>通用</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:154 -#, fuzzy msgid "" "This option enables/disables symmetric multiprocessing for multi-core " "processors" msgstr "" -"<guilabel>启用 SMP</guilabel>：此选项启用或禁用多核处理器上的对称多处理器特" -"性。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:159 -#, fuzzy msgid "<emphasis>Enable APIC</emphasis>" -msgstr "<emphasis>通用</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:161 -#, fuzzy msgid "" "Enabling this gives the operating system access to the Advanced Programmable " "Interrupt Controller. APIC devices permit more complex priority models, and " "Advanced IRQ (Interrupt Request) management." msgstr "" -"<guilabel>启用 APIC</guilabel>：启用或禁用高级可编程中断控制器。APIC 设备可以" -"支持更复杂的优先级模型和高级 IRQ（中断请求）管理功能。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:168 -#, fuzzy msgid "<emphasis>Enable Local APIC</emphasis>" -msgstr "<emphasis>通用</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:170 -#, fuzzy msgid "" "Here you can set Local APIC, which manages all external interrupts for a " "specific processor in an SMP system" msgstr "" -"<guilabel>启用本地 APIC</guilabel>：您可以在这里设置本地 APIC，用于在 SMP 系" -"统中管理某个特定处理器的所有外部中断。" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:177 -#, fuzzy msgid "Bootloader Configuration" -msgstr "声音配置" +msgstr "引导程序配置" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:180 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-setupBootloader3.png\"/> </" "imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"setupBootloader3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-setupBootloader3.png\" align=" -"\"center\"/> </imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:191 -#, fuzzy msgid "<emphasis role=\"bold\">Default</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:193 -#, fuzzy msgid "The operating system to be started up by default." -msgstr "<guilabel>默认</guilabel>：使用默认引导参数" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:197 -#, fuzzy msgid "<emphasis role=\"bold\">Append</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:199 -#, fuzzy msgid "" "This option lets you pass information to the kernel or tell the kernel to " "give you more information as it boots." msgstr "" -"<guilabel>追加</guilabel> ：用于在默认引导选项后添加额外所需的内核参数。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:204 -#, fuzzy msgid "<emphasis role=\"bold\">Probe foreign OS</emphasis>" -msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:206 -#, fuzzy msgid "" "If you already have other operating systems installed, Mageia attempts to " "add them to your new Mageia boot menu. If you don't want this behaviour, " "then untick the Probe Foreign OS option." msgstr "" -"若您已安装了其他操作系统，Mageia 会尝试将它们也添加到 Mageia 的引导菜单。如果" -"您不希望 Mageia 这么做，请点击<guibutton>下一步</guibutton>，然后取消勾选" -"<guilabel>检测其他操作系统</guilabel>" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:215 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-setupBootloader4.png\"/> </imageobject> <imageobject condition=\"live" "\"> <imagedata align=\"center\" fileref=\"live-setupBootloader4.png\"/> </" "imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"setupBootloader3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-setupBootloader3.png\" align=" -"\"center\"/> </imageobject>" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:226 -#, fuzzy msgid "<emphasis>Video mode</emphasis>" -msgstr "<emphasis>供应商</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:228 -#, fuzzy msgid "" "This sets the screen size and colour depth to be used by the boot menu. If " "you click the down-triangle you will be offered other size and colour depth " "options." msgstr "" -"<guilabel>图像模式</guilabel>：用于设定显示引导菜单时的屏幕分辨率和色彩深度。" -"若要从可用的模式中进行选择，请点击下三角标记。" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:234 -#, fuzzy msgid "<emphasis>Do not touch ESP or MBR</emphasis>" -msgstr "<emphasis>供应商</emphasis>" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/setupBootloader.xml:236 @@ -4706,17 +3933,15 @@ msgstr "" #. type: Content of: <section><section><section><mediaobject> #: en/setupBootloader.xml:245 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"live-setupBootloader5.png" "\"/> </imageobject>" -msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>" +msgstr "" #. type: Content of: <section><section><title> #: en/setupBootloader.xml:253 -#, fuzzy msgid "Other Options" -msgstr "选项" +msgstr "其他选项" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:256 @@ -4725,7 +3950,6 @@ msgstr "使用现存的引导器" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:258 -#, fuzzy msgid "" "The exact procedure for adding Mageia to an existing bootloader is beyond " "the scope of this documentation. However in most cases it will involve " @@ -4733,15 +3957,11 @@ msgid "" "Mageia and automatically add an entry for it in the bootloader menu. See the " "documentation for the relevant operating system." msgstr "" -"有关添加 Mageia 系统至现存引导器的问题超出了此帮助的范围。多数情况下，这设计" -"到运行相应的引导器安装程序，并自动检测和添加引导项。请参见有关操作系统的文档" -"以便进一步操作。" #. type: Content of: <section><section><section><title> #: en/setupBootloader.xml:267 -#, fuzzy msgid "Installing Without a Bootloader" -msgstr "使用 Mageia 提供的引导器" +msgstr "" #. type: Content of: <section><section><section><para> #: en/setupBootloader.xml:269 @@ -4769,33 +3989,26 @@ msgstr "设置SCSI" #. 2018/0217 apb: Merge 2nd/3rd paras and reword. #. type: Content of: <section><mediaobject> #: en/setupSCSI.xml:33 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-setupSCSI.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"setupSCSI-im1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" -"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/setupSCSI.xml:39 -#, fuzzy msgid "" "DrakX will normally detect hard disks correctly. However, with some older " "SCSI controllers it may be unable to determine the correct drivers to use " "and subsequently fail to recognise the drive." msgstr "" -"Drakx 通常会正确探测硬盘。对于一些较老的 SCSI 控制器，Drakx 可能无法确定所需" -"的驱动，并因此无法识别它们。" #. type: Content of: <section><para> #: en/setupSCSI.xml:44 -#, fuzzy msgid "" "If your device is not recognised, you will need to manually tell DrakX which " "SCSI drive(s) you have. DrakX should then be able to configure the drive(s) " "correctly." -msgstr "在这种情况下，您需要手动设置 DrakX 应当使用的 SCSI 驱动。" +msgstr "" #. type: Content of: <section><title> #: en/software.xml:4 @@ -4804,9 +4017,8 @@ msgstr "" #. type: Content of: <section><section><title> #: en/software.xml:7 -#, fuzzy msgid "Media Selection" -msgstr "介质选择 (Nonfree)" +msgstr "介质选择" #. type: Content of: <section><info><title> #: en/soundConfig.xml:10 @@ -4818,13 +4030,10 @@ msgstr "声音配置" #. 2018/02/17 apb: Centre-align PNG #. type: Content of: <section><mediaobject> #: en/soundConfig.xml:20 -#, fuzzy msgid "" "<imageobject> <imagedata align=\"center\" fileref=\"dx2-soundConfig.png\" " "format=\"PNG\" revision=\"1\" xml:id=\"soundConfig-im1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format=" -"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>" #. type: Content of: <section><para> #: en/soundConfig.xml:26 @@ -4865,37 +4074,28 @@ msgstr "确定要格式化的硬盘" #. 2018/02/20 apb: Change the 2 paras to itemized listitems. #. type: Content of: <section><mediaobject> #: en/takeOverHdConfirm.xml:29 -#, fuzzy msgid "" "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" "\"dx2-takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject> <imageobject " "condition=\"live\"> <imagedata align=\"center\" fileref=\"live-" "takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject>" msgstr "" -"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -"doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -"imageobject>" #. type: Content of: <section><itemizedlist><listitem><para> #: en/takeOverHdConfirm.xml:42 -#, fuzzy msgid "" "Click on <emphasis>Previous</emphasis> if you are at all unsure about your " "choice." -msgstr "若您不确定选择是否正确，请点击 <guibutton>上一步</guibutton>。" +msgstr "" #. type: Content of: <section><itemizedlist><listitem><para> #: en/takeOverHdConfirm.xml:48 -#, fuzzy msgid "" "Click on <emphasis>Next</emphasis> to proceed if you are sure that it is OK " "to erase <emphasis role=\"bold\">every</emphasis> partition, <emphasis role=" "\"bold\">every</emphasis> operating system and <emphasis role=\"bold\">all " "data</emphasis> that might be on that hard disk." msgstr "" -"如果您确定要删除所有分区和所有操作系统（及数据），请点击 <guibutton>下一步</" -"guibutton>。" #. type: Content of: <section><info><title> #: en/testing.xml:11 @@ -4927,14 +4127,11 @@ msgstr "测试硬件" #. type: Content of: <section><section><section><para> #: en/testing.xml:33 -#, fuzzy msgid "" "One of the aims of using the Live mode is to test that your hardware is " "correctly managed by Mageia. You can check if all devices have a driver in " "the Hardware section of the Mageia Control Center:" msgstr "" -"Live 模式的目的在于测试硬件是否被 Mageia 正确管理。您可以在 Mageia 控制中心中" -"检查所有设备是否均有对应驱动程序。您可以测试最新的设备：" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:40 @@ -4943,9 +4140,8 @@ msgstr "网络接口：使用 net_applet 进行配置" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:44 -#, fuzzy msgid "graphics card: if you see the previous screen, it's already OK." -msgstr "显卡：若您能看见刚才的界面，说明配置正常。" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:49 @@ -4954,9 +4150,8 @@ msgstr "声音：刚才播放了“叮呤”声" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:53 -#, fuzzy msgid "printer: configure your printer/s and print a test page" -msgstr "打印机：配置打印机，并打印测试页" +msgstr "" #. type: Content of: <section><section><section><itemizedlist><listitem><para> #: en/testing.xml:57 @@ -4965,19 +4160,17 @@ msgstr "扫描器：扫描文档自 ..." #. type: Content of: <section><section><section><para> #: en/testing.xml:61 -#, fuzzy msgid "" "If everything is satisfactory, you can proceed with the installation. If " "not, you can use the <emphasis>Quit</emphasis> button to exit." -msgstr "如果一切就绪，安装现在即可开始；反之，您可以点击退出按钮。" +msgstr "" #. type: Content of: <section><section><section><note><para> #: en/testing.xml:66 -#, fuzzy msgid "" "The configuration settings you apply here are carried over if you decide to " "proceed with the installation." -msgstr "此处您的配置将保留并用于安装过程。" +msgstr "" #. type: Content of: <section><section><section><info><title> #: en/testing.xml:73 @@ -4986,16 +4179,12 @@ msgstr "启动安装" #. type: Content of: <section><section><section><para> #: en/testing.xml:76 -#, fuzzy msgid "" "To launch the installation of the Live DVD to a hard disk or SSD drive, " "simply click the <emphasis>Install on Hard Disk</emphasis> icon on the Live " "desktop. You will then see this screen, followed by the <link linkend=" "\"doPartitionDisks\">Partitioning</link> step." msgstr "" -"要使用 Mageia LiveCD 或 LiveDVD 来安装系统至硬盘/SSD，只需点击“安装至硬盘”图" -"标。随后您将会看见此界面，然后点击“<link linkend=\"doPartitionDisks\">分区</" -"link>”并直接进入安装过程。" #. type: Content of: <section><section><section><mediaobject> #: en/testing.xml:82 @@ -5013,31 +4202,23 @@ msgstr "卸载Mageia" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:18 -#, fuzzy msgid "" "If Mageia didn't convince you or you can't install it correctly - in short " "you want get rid of it - that is your right and Mageia also gives you the " "possibility to uninstall. This is not true for every operating system." msgstr "" -"若 Mageia 未能给您提供良好体验，或您未能正确安装系统，Mageia 允许您卸载它。这" -"一功能可不是所有操作系统都会提供的！" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:23 -#, fuzzy msgid "" "After backing up your data, reboot your Mageia installation DVD and select " "<emphasis>Rescue system</emphasis>, then <emphasis>Restore Windows boot " "loader</emphasis>. At the next boot, you will only have Windows, with no " "option to choose your Mageia operating system." msgstr "" -"在备份您的数据后，请用 Mageia 安装 DVD 重新引导系统，并进入救援系统，选择恢" -"复 Windows 引导器（Restore Windows boot loader）。再次重启后，您将只能进入 " -"Windows 系统。" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:28 -#, fuzzy msgid "" "In Windows, to recover the space used by Mageia partitions: click on " "<menuchoice> <guimenu>Start</guimenu> <guimenuitem>Control Panel</" @@ -5049,25 +4230,16 @@ msgid "" "of these partitions and select <emphasis>Delete</emphasis> to free up the " "space." msgstr "" -"若要将被 Mageia 使用的空间重新用于 Windows，请点击 <code>开始 -> 控制面包 -> " -"管理工具 -> 计算机管理 -> 存储 -> 磁盘管理</code>。拥有 <guilabel>未知</" -"guilabel> 类型的分区即为 Mageia 分区，其大小和位置应当与您安装时指定的一致。" -"右键点击这些分区，并选择 <guibutton>删除</guibutton>，即可释放这些分区占用的" -"空间。" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:46 -#, fuzzy msgid "" "If you are using Windows XP, you can create a new partition and format it " "(FAT32 or NTFS). It will then get a partition letter." msgstr "" -"若您安装了 Windows XP，您可以使用空闲空间创建一个新分区并格式化它（FAT32 或 " -"NTFS），系统将自动为其分配一个盘符。" #. type: Content of: <section><para> #: en/uninstall-Mageia.xml:49 -#, fuzzy msgid "" "If you have Vista or 7, you have one more possibility, you can extend the " "existing partition that is at the left of the freed space. There are other " @@ -5075,9 +4247,6 @@ msgid "" "\">gparted</emphasis>, available for both Windows and Linux. As always, when " "changing partitions, be very careful to back up anything important to you." msgstr "" -"若您同时安装了 Windows Vista 或 Windows 7，您还可以扩展现存分区的大小。您也可" -"以使用其他分区工具，如 gparted（Windows 和 Linux 下均由对应版本）。记住：在调" -"整分区时，请多加小心，并确保所有重要的数据均以备份。" #. type: Content of: <section><info><title> #: en/unused.xml:3 @@ -5087,23 +4256,17 @@ msgstr "保留或删除未使用的软件" #. 2018/03/03 apb: Adjusted text and updated SC's to Mga6. #. type: Content of: <section><mediaobject> #: en/unused.xml:9 -#, fuzzy msgid "" "<imageobject> <imagedata format=\"PNG\" xml:id=\"unused-im1\" fileref=\"live-" "unused.png\" align=\"center\" revision=\"1\"/> </imageobject>" msgstr "" -"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-" -"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" #. type: Content of: <section><para> #: en/unused.xml:14 -#, fuzzy msgid "" "In this step, the installer looks for unused locales packages and unused " "hardware packages and you are then given an opportunity to delete them." msgstr "" -"在这一步中，安装程序将会查找未使用的语言包和硬件包，并将其删除。除非您需要在" -"不同的硬件上运行系统，否则最好允许此操作。" #. type: Content of: <section><para> #: en/unused.xml:18 @@ -5131,1189 +4294,8 @@ msgstr "" #. type: Content of: <section><para> #: en/unused.xml:31 -#, fuzzy msgid "" "The next step is the copying of files to hard disk. This process should just " "take a little while to complete. When it is finishing you will briefly get a " "blank screen - this is normal." msgstr "" -"下一步是复制文件到硬盘。这需要花费几分钟的时间。之后，您的屏幕会变黑一段时" -"间，这是正常现象。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"live-setupBootloader5.png\" align=" -#~ "\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx2-setupBootloader5.png\"/> </" -#~ "imageobject>" - -#, fuzzy -#~ msgid "" -#~ "To do this you need to manually edit <filename>/boot/grub2/custom.cfg</" -#~ "filename> or use the software <application>grub-customizer</application> " -#~ "tool instead (available in the Mageia repositories)." -#~ msgstr "" -#~ "为此，您需要手动编辑 /boot/grub2/custom.cfg，或者使用 grub-customizer（可" -#~ "以从 Mageia 仓库中安装）来编辑引导项。" - -#, fuzzy -#~ msgid "" -#~ "For more information, see: <link ns4:href=\"https://wiki.mageia.org/en/" -#~ "Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</" -#~ "link>" -#~ msgstr "" -#~ "有关更多信息，请参考我们的 wiki：<link ns2:href=\"https://wiki.mageia.org/" -#~ "en/Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-" -#~ "efi_and_Mageia</link>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"live-bootCSM.png\" align=\"center\"/> " -#~ "</imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </" -#~ "imageobject>" - -#, fuzzy -#~ msgid "<keycap>F1</keycap> <emphasis role=\"bold\">Help</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "<keycap>F2</keycap> <emphasis role=\"bold\">Language</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "<keycap>F3</keycap> <emphasis role=\"bold\">Video Mode</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "" -#~ "If needed, change the screen resolution by pressing <keycap>F3</keycap>. " -#~ "Options are: 640x480, 800x600, 1024x768." -#~ msgstr "按 F3 键可以更改屏幕分辨率（仅用于传统模式）。" - -#, fuzzy -#~ msgid "<keycap>F4</keycap> <emphasis role=\"bold\">Source</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "" -#~ "If the installation is carried out in a network with an SLP server, then " -#~ "select one of the installation sources available on the server with this " -#~ "option." -#~ msgstr "" -#~ "F4 - CD-Rom。CD-Rom 相关选项。一般通过插入的安装媒体来安装，但也可以选择 " -#~ "FTP、NFS 等其他安装源。如果通过网络上的 SLP 服务器来安装，请用此选项选择一" -#~ "个服务器上可用的安装源。" - -#, fuzzy -#~ msgid "<keycap>F5</keycap> <emphasis role=\"bold\">Driver</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "" -#~ "<keycap>F6</keycap> <emphasis role=\"bold\">Kernel Options</emphasis>" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "" -#~ "<emphasis role=\"bold\">Default:</emphasis> splash quiet noiswmd resume " -#~ "audit=0" -#~ msgstr "<emphasis role=\"bold\">分区大小：</emphasis>" - -#, fuzzy -#~ msgid "" -#~ "<emphasis role=\"bold\">No ACPI:</emphasis> (Advanced Configuration and " -#~ "Power Interface): Power management features are not used." -#~ msgstr "- 无 ACPI（高级配置与电源接口），不使用电源管理功能" - -#, fuzzy -#~ msgid "" -#~ "<emphasis role=\"bold\">No Local APIC:</emphasis> (Local Advanced " -#~ "Programmable Interrupt Controller): CPU interrupt. Select this option if " -#~ "you experience system misbehaviour like a kernel panic in relation to " -#~ "APIC." -#~ msgstr "" -#~ "- 无本地 APIC（本地高级可编程终端控制器）。若您不需要控制 CPU 中断，可以选" -#~ "择此选项" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"live-bootUEFI.png\" " -#~ "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " -#~ "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome.png\" align=\"center\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </" -#~ "imageobject>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </" -#~ "imageobject>" - -#~ msgid "webcam:" -#~ msgstr "摄像头：" - -#~ msgid "User and Superuser Management" -#~ msgstr "用户和管理员管理" - -#, fuzzy -#~ msgid "" -#~ "Every partition is shown to the left as: <emphasis role=\"bold\">Device " -#~ "(capacity, mount point, type).</emphasis>" -#~ msgstr "" -#~ "所有分区的属性将按下列顺序显示：“设备名”（“容量”，“挂载点”，“类型”）。" - -#~ msgid "In advanced tab, you will find more options about clock settings." -#~ msgstr "在高级选项卡中，你可以找到更多有关时钟设置的选项。" - -#~ msgid "From a disc" -#~ msgstr "自磁盘" - -#~ msgid "" -#~ "You can boot directly from the media you used to burn your image (CD-ROM, " -#~ "DVD-ROM...). You usually just need to insert it in your CD/DVD drive for " -#~ "the bootloader to launch the installation automatically after rebooting " -#~ "the computer. If that does not happen you may need to reconfigure your " -#~ "BIOS or press one key that will offer you to choose the peripheral from " -#~ "which the computer will boot." -#~ msgstr "" -#~ "可以使用刻录的镜像（CD-ROM，DVD-ROM等）直接引导 Mageia。只需将媒体插入到光" -#~ "盘驱动器中，然后重启电脑即可。若没有出现引导画面，则需要手动修改 BIOS 配" -#~ "置，或者在电脑启动时按下特定按键来选择引导设备。" - -#~ msgid "" -#~ "According to which hardware you have, and how it is configured, you get " -#~ "either one or another of the two screens below." -#~ msgstr "根据你所使用的硬件以及配置的不同，接下来还有一些安装选项需要设置。" - -#~ msgid "From a USB device" -#~ msgstr "自 USB 设备" - -#~ msgid "" -#~ "You can boot from the USB device on which you dumped your image ISO. " -#~ "According to your BIOS settings, the computer boots perhaps directly on " -#~ "the USB device already plugged in a port. If that does not happen you may " -#~ "need to reconfigure your BIOS or press one key that will offer you to " -#~ "choose the peripheral from which the computer will boot." -#~ msgstr "" -#~ "你可以通过写有镜像 ISO 的 USB 设备来引导 Mageia。根据 BIOS 设置不同，电脑" -#~ "可能直接从插入的 USB 设备上启动，也可能跳过 USB 设备。在后一种情况下，你需" -#~ "要手动修改 BIOS 配置，或在电脑启动时按下特定按键来选择引导设备。" - -#~ msgid "" -#~ "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>" -#~ msgstr "" -#~ "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>" - -#~ msgid "In the middle menu, you have the choice between three actions:" -#~ msgstr "中间的菜单提供了三个可选操作：" - -#~ msgid "" -#~ "Boot from hard disk: This choice allows to boot from hard disk, as usual, " -#~ "when no media (CD/DVD or USB stick) is connected. (not working with " -#~ "Mageia 5)." -#~ msgstr "" -#~ "Boot from hard disk：从硬盘引导，和不使用引导媒体的情况相同（即不启动 " -#~ "Mageia 5）。" - -#~ msgid "In the bottom menu, are the Boot Options:" -#~ msgstr "底部菜单中提供了引导选项：" - -#~ msgid "" -#~ "F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\"" -#~ msgstr "F1 - 帮助。说明”splash“、”apm“、”acpi“、”ide“等选项。" - -#~ msgid "F2 - Language. Choose the display language of the screens." -#~ msgstr "F2 - 语言。选择用于显示的语言。" - -#~ msgid "" -#~ "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728" -#~ msgstr "F3 -屏幕分辨率。选择 640x400、800x600、1024x728 或纯文本模式。" - -#~ msgid "" -#~ "F5 - Driver. Yes or No. The system is aware about the presence of an " -#~ "optional disk with a driver update and will require its insertion during " -#~ "installation process." -#~ msgstr "" -#~ "F5 - 驱动。是否使用驱动。系统将在安装过程中提醒需要使用驱动更新的磁盘，并" -#~ "将其插入。" - -#~ msgid "" -#~ "F6 - Kernel options. This is a way to specify options according to your " -#~ "hardware and the drivers to use." -#~ msgstr "F6 - 内核选项。用于指定与硬件和驱动相关的内核参数。" - -#~ msgid "First screen while booting on UEFI system from disk" -#~ msgstr "在 UEFI 模式下引导时的第一个画面" - -#~ msgid "" -#~ "You have only the choice to run Mageia in Live mode (first choice) or to " -#~ "process the installation (second choice)." -#~ msgstr "" -#~ "你可以选择以 Live 模式运行 Mageia（第一个选项）或者直接进行安装（第二个选" -#~ "项）。" - -#~ msgid "" -#~ "In each case, the first steps will be the same to choose language, " -#~ "timezone and keyboard, then the processes differ, with <link linkend=" -#~ "\"testing\">additional steps in Live mode</link>." -#~ msgstr "" -#~ "在不同选项中，都需要先选择语言、时区和键盘布局，然后 <link linkend=" -#~ "\"testing\">Live 模式下会有额外的步骤</link>。" - -#, fuzzy -#~ msgid "" -#~ "Depending on your selection here, you may be offered further screens to " -#~ "fine-tune your choice." -#~ msgstr "根据所选项不同，随后会出现不同的窗口用于详细设置。" - -#, fuzzy -#~ msgid "The settings DrakX chose are usually good." -#~ msgstr "DrakX自动选择的设置通常可正常工作。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_card_list-" -#~ "im1\" align=\"center\" fileref=\"dx2-configureX_card_list.png\" revision=" -#~ "\"1\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" " -#~ "align=\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </" -#~ "imageobject>" - -#, fuzzy -#~ msgid "" -#~ "The <emphasis role=\"bold\">Nonfree</emphasis> repository needs to be " -#~ "explicitly enabled to access them. If you didn't enable it previously, " -#~ "you should do this after your first reboot." -#~ msgstr "" -#~ "需要手动启用 Nonfree 仓库才能使用其中的程序。若您在此之前未选中 Nonfree 仓" -#~ "库，您应当在安装完成并重启后启用它。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_chooser-im1\" " -#~ "fileref=\"dx2-configureX_chooser.png\" align=\"center\" revision=\"1\"/> " -#~ "</imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=" -#~ "\"live-reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" - -#~ msgid "" -#~ "<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your " -#~ "card from the list if needed." -#~ msgstr "" -#~ "<emphasis><guibutton>显卡</guibutton></emphasis>：请从列表中选择您的显卡设" -#~ "备。" - -#~ msgid "Incorrect refresh rates may damage your monitor" -#~ msgstr "不正确的刷新率可能会损坏显示器" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_monitor-im1\" " -#~ "fileref=\"dx2-configureX_monitor.png\" align=\"center\" revision=\"1\"/> " -#~ "</imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=" -#~ "\"live-reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>" - -#~ msgid "<emphasis>Custom</emphasis>" -#~ msgstr "<emphasis>自定义</emphasis>" - -#~ msgid "<emphasis>Plug 'n Play</emphasis>" -#~ msgstr "<emphasis>即插即用</emphasis>" - -#~ msgid "the monitor manufacturers name" -#~ msgstr "显示器制造商名称" - -#~ msgid "the monitor description" -#~ msgstr "显示器描述" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake." -#~ "png\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> " -#~ "<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake." -#~ "png\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> " -#~ "<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </" -#~ "imageobject>" - -#~ msgid "Click <guibutton>Done</guibutton> when you're ready." -#~ msgstr " 准备好时点击<guibutton>完成</guibutton>按钮。" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" " -#~ "align=\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" " -#~ "align=\"center\"/> </imageobject>" - -#~ msgid "Use Free Space" -#~ msgstr "使用空闲空间" - -#~ msgid "Use Free Space on a Windows Partition" -#~ msgstr "使用 Windows 分区中的空闲空间" - -#~ msgid "" -#~ "If you have unused space on an existing Windows partition, the installer " -#~ "may offer to use it." -#~ msgstr "若现存 Windows 分区中有空闲空间，安装程序将把 Mageia 安装在此处。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks2.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks2.png\" " -#~ "align=\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" " -#~ "align=\"center\"/> </imageobject>" - -#~ msgid "Erase and use Entire Disk." -#~ msgstr "擦除磁盘，并使用整个磁盘。" - -#~ msgid "" -#~ "Note! This will erase ALL data on the selected hard drive. Take care!" -#~ msgstr "注意！将会删除所选驱动器上的所有数据！请谨慎操作！" - -#, fuzzy -#~ msgid "Custom disk partitioning" -#~ msgstr "使用 DiskDrake 自定义磁盘分区方式" - -#, fuzzy -#~ msgid "" -#~ "That means that from 160 GB or greater available space, the installer " -#~ "will create three partitions: 50 GB for <emphasis role=\"bold\">/</" -#~ "emphasis>, 4 GB for <emphasis role=\"bold\">swap</emphasis> and the " -#~ "remainder for <emphasis role=\"bold\">/home</emphasis>." -#~ msgstr "" -#~ "这意味着如果您有 160GB 可用空间，将会创建 50GB 的 / 分区，4GB 的交换分区，" -#~ "以及 106GB 的 /home 分区。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref=" -#~ "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=" -#~ "\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </" -#~ "imageobject>" - -#~ msgid "January 2015" -#~ msgstr "2015 年一月" - -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>" - -#, fuzzy -#~ msgid "Using a Mageia DVD" -#~ msgstr "使用 Mageia 提供的引导器" - -#, fuzzy -#~ msgid "" -#~ "Here are the default welcome screens when using a Mageia DVD, The first " -#~ "one is what you will see if you have a UEFI system, the second one is for " -#~ "a Legacy system:" -#~ msgstr "" -#~ "此处是使用 Mageia DVD 安装的默认欢迎屏幕：第一个是使用传统引导的系统，第二" -#~ "个是使用 UEFI 引导的系统。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>" -#~ msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" - -#, fuzzy -#~ msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>" -#~ msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\" align=\"center\"/" -#~ "> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "Use the arrow keys to select the language then press <emphasis role=\"bold" -#~ "\">Enter</emphasis>." -#~ msgstr "使用方向键来选择语言，然后按 Enter 键。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome5def.png\" align=\"center\"/" -#~ "> </imageobject>" - -#, fuzzy -#~ msgid "Default: It doesn't alter anything in the default options." -#~ msgstr "- 默认，即使用默认选项。" - -#, fuzzy -#~ msgid "" -#~ "Safe Settings: Priority is given to the safer options at the price of a " -#~ "performance detriment." -#~ msgstr "- 安全设置，使用更安全的选项（同时会在一定程度上降低性能）" - -#~ msgid "" -#~ "When you select one of these entries, it modifies the default options " -#~ "displayed in the <guilabel>Boot Options</guilabel> line." -#~ msgstr "" -#~ "若选择了这些选项之一，将会同时更改<guilabel>引导选项</guilabel>行中的默认" -#~ "选项。" - -#, fuzzy -#~ msgid "" -#~ "In some Mageia releases, it may happen that the entries selected with " -#~ "<emphasis role=\"bold\">F6</emphasis> do not appear in the <guilabel>Boot " -#~ "Options</guilabel> line, despite this, they will in fact be applied." -#~ msgstr "" -#~ "在部分 Mageia 版本中，使用 F6 键选择的选项可能不会在<guilabel>引导选项</" -#~ "guilabel>中出现，但这并不影响选项发挥作用。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcome6opt.png\"/" -#~ "> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "Pressing <emphasis role=\"bold\">F1</emphasis> opens a help window for " -#~ "various boot options. Select an item with the arrow keys and press " -#~ "<emphasis role=\"bold\">Enter</emphasis> for more details or press " -#~ "<emphasis role=\"bold\">Esc</emphasis> to go back to the welcome screen." -#~ msgstr "" -#~ "按 F1 可以打开包含更多选项的新窗口。使用方向键和 Enter 来查看更多细节，或" -#~ "按 Esc 来返回到欢迎屏幕。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\" align=\"center\"/" -#~ "> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "The detailed view about the splash option. Press <emphasis role=\"bold" -#~ "\">Esc</emphasis> or select <guilabel>Return to Boot Options</guilabel> " -#~ "to go back to the options list. These options can be added by hand in the " -#~ "<guilabel>Boot Options</guilabel> line." -#~ msgstr "" -#~ "有关 splash 选项的细节。按 Esc 或选择 <guilabel>返回引导选项</guilabel>可" -#~ "以回到选项列表。可以手动将这些选项添加到<guilabel>引导选项</guilabel> 行。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx-welcomeHelp2.png\"/" -#~ "> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "The help is translated in the chosen language with <emphasis role=\"bold" -#~ "\">F2</emphasis>." -#~ msgstr "按 F2 键可以将帮助翻译为所选语言。" - -#~ msgid "" -#~ "For more information about kernel options on legacy and UEFI systems, " -#~ "see: <link ns2:href=\"https://wiki.mageia.org/en/" -#~ "How_to_set_up_kernel_options\">https://wiki.mageia.org/en/" -#~ "How_to_set_up_kernel_options</link>" -#~ msgstr "" -#~ "有关传统引导和 UEFI 引导的内核选项，请参考：<link ns2:href=\"https://wiki." -#~ "mageia.org/en/How_to_set_up_kernel_options\">https://wiki.mageia.org/en/" -#~ "How_to_set_up_kernel_options</link>。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"media_selection-im1\" " -#~ "align=\"center\" revision=\"1\" fileref=\"dx2-media_selection.png\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" " -#~ "align=\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </" -#~ "imageobject>" - -#~ msgid "Summary of miscellaneous parameters" -#~ msgstr "一些杂项" - -#~ msgid "<guilabel>Timezone</guilabel>" -#~ msgstr "<guilabel>时区</guilabel>" - -#~ msgid "<guilabel>Country / Region</guilabel>" -#~ msgstr "<guilabel>国家/地区</guilabel>" - -#~ msgid "<guilabel>Bootloader</guilabel>" -#~ msgstr "<guilabel>引导器</guilabel>" - -#~ msgid "For more information, see <xref linkend=\"setupBootloader\"/>" -#~ msgstr "更多信息，参见 <xref linkend=\"setupBootloader\"/>" - -#~ msgid "<guilabel>User management</guilabel>" -#~ msgstr "<guilabel>用户管理</guilabel>" - -#~ msgid "<guilabel>Services</guilabel>:" -#~ msgstr "<guilabel>服务</guilabel>:" - -#~ msgid "For more information, see <xref linkend=\"configureServices\"/>" -#~ msgstr "更多信息，参见 <xref linkend=\"configureServices\"/>." - -#~ msgid "<guilabel>Keyboard</guilabel>:" -#~ msgstr "<guilabel>键盘</guilabel>:" - -#~ msgid "<guilabel>Mouse</guilabel>:" -#~ msgstr "<guilabel>鼠标</guilabel>:" - -#~ msgid "<guilabel>Sound card</guilabel>:" -#~ msgstr "<guilabel>声卡</guilabel>:" - -#, fuzzy -#~ msgid "" -#~ "The installer uses the default driver - if there is a default one. The " -#~ "option to select a different driver is only given when there is more than " -#~ "one driver for your card, but where none of them is the default one." -#~ msgstr "" -#~ "安装器将会使用默认驱动（如果有的话）。只有存在多个可用驱动（且均不是默认驱" -#~ "动）时，才会提示您进行选择。" - -#~ msgid "<guilabel>Graphical interface</guilabel>:" -#~ msgstr "<guilabel>图形界面</guilabel>:" - -#~ msgid "<guilabel>Network</guilabel>:" -#~ msgstr "<guilabel>网络</guilabel>:" - -#~ msgid "<guilabel>Proxies</guilabel>:" -#~ msgstr "<guilabel>代理</guilabel>：" - -#~ msgid "<guilabel>Security Level</guilabel>:" -#~ msgstr "<guilabel>安全等级</guilabel>：" - -#~ msgid "Check the option which best suits your usage." -#~ msgstr "请勾选您认为合适的选项。" - -#~ msgid "<guilabel>Firewall</guilabel>:" -#~ msgstr "<guilabel>防火墙</guilabel>：" - -#~ msgid "" -#~ "A firewall is intended to be a barrier between your important data and " -#~ "the rascals out there on the internet who would compromise or steal it." -#~ msgstr "防火墙将保护您的重要数据，以免其被他人恶意利用或窃取。" - -#~ msgid "" -#~ "Select the services that you wish to have access to your system. Your " -#~ "selections will depend on what you use your computer for. For more " -#~ "information, see <xref linkend=\"firewall\"/>." -#~ msgstr "" -#~ "选择您需要使用的服务，这取决与您希望如何使用您的计算机。有关更多信息，请参" -#~ "见 <xref linkend=\"firewall\"/>。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"securityLevel-im1\" " -#~ "align=\"center\" fileref=\"dx2-securityLevel.png\" revision=\"1\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" " -#~ "align=\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </" -#~ "imageobject>" - -#~ msgid "64 bit architecture only." -#~ msgstr "仅支持 64 位处理器。" - -#, fuzzy -#~ msgid "" -#~ "md5sum and sha1sum are tools to check the ISO integrity. Choose one or " -#~ "the other, and copy the checksum <link linkend=\"integrity\">for later " -#~ "use</link>. Then a window similar to this one appears:" -#~ msgstr "" -#~ "md5sum 和 sha1sum 是用于检查 ISO 文件完整性的工具，只需使用其中一种即可。" -#~ "请您保留它们以便<link linkend=\"integrity\">后续使用</link>。之后，窗口将" -#~ "会显示：" - -#~ msgid "" -#~ "To recover the original capacity, you must redo partitioning and re-" -#~ "format the USB stick." -#~ msgstr "若要恢复原始容量，您必须重新进行分区和格式化操作。" - -#~ msgid "Install" -#~ msgstr "安装" - -#~ msgid "Upgrade" -#~ msgstr "升级" - -#, fuzzy -#~ msgid "" -#~ "If during install you decide to stop the installation, it is possible to " -#~ "reboot, but please think twice before you do this. Once a partition has " -#~ "been formatted or updates have started to be installed, your computer " -#~ "isn't in the same state anymore and rebooting it could very well leave " -#~ "you with an unusable system. If in spite of that, and only if you are " -#~ "very sure rebooting is what you want, go to a text terminal by pressing " -#~ "<guilabel>Alt Ctrl F2</guilabel> simultaneously. After that, press " -#~ "<guilabel>Alt Ctrl Delete</guilabel> simultaneously to reboot." -#~ msgstr "" -#~ "若安装过程在某一步中断，您可以选择重启，但请三思而后行。一旦分区被格式化，" -#~ "或升级过程开始，电脑中的内容将发生变化，此时重启可能导致系统无法使用。若您" -#~ "确定要重启，可以按 <guibutton>Alt Ctrl F2</guibutton> 切换到终端，然后按" -#~ "下 <guibutton>Alt Ctrl Delete</guibutton> 来触发重启操作。" - -#~ msgid "" -#~ "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" " -#~ "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" " -#~ "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </" -#~ "imageobject>" - -#~ msgid "" -#~ "You will be required to set the keyboard layout you wish to use in Mageia​​" -#~ ". The default one is selected according to your language and timezone " -#~ "previously selected." -#~ msgstr "" -#~ "您需要选择在 Mageia 中使用的键盘布局。默认布局已根据您之前的语言和时区设置" -#~ "进行选择。" - -#~ msgid "Mageia uses UTF-8 (Unicode) support by default." -#~ msgstr "Mageia 默认使用 UTF-8（Unicode）格式。" - -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " -#~ "format=\"PNG\" > </imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" " -#~ "format=\"PNG\" > </imagedata> </imageobject>" - -#~ msgid "By default, Mageia uses exclusively:" -#~ msgstr "默认情况下，Mageia 仅使用：" - -#, fuzzy -#~ msgid "GRUB2-efi for a UEFI system." -#~ msgstr "GRUB2-efi，当使用 UEFI 硬件时。" - -#, fuzzy -#~ msgid "The Mageia graphical menus are nice :)" -#~ msgstr "Mageia 的图形化菜单：" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=" -#~ "\"live-setupBootloader.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=" -#~ "\"live-setupBootloader.png\"/> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "Don't modify the <emphasis role=\"bold\">Boot Device</emphasis> unless " -#~ "you really know what you are doing." -#~ msgstr "若您不确定如何操作，请不要修改“引导设备”。" - -#, fuzzy -#~ msgid "" -#~ "With a UEFI system, the user interface is slightly different as you " -#~ "cannot choose between the <emphasis role=\"bold\">with</emphasis> or " -#~ "<emphasis role=\"bold\">without graphical menu</emphasis> options." -#~ msgstr "" -#~ "对于 UEFI，用户界面会稍有不同，您将无法选择引导器（因为只能使用 Grub2-" -#~ "efi）。" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </" -#~ "imageobject>" - -#, fuzzy -#~ msgid "" -#~ "By default, and according to your system, Mageia writes one of the " -#~ "following:" -#~ msgstr "默认情况下，根据您的硬件情况，Mageia 会将：" - -#, fuzzy -#~ msgid "a GRUB2-efi bootloader into the ESP" -#~ msgstr "GRUB2-efi 引导器安装至 ESP" - -#~ msgid "Using chain loading" -#~ msgstr "使用链式加载（chain loading）" - -#, fuzzy -#~ msgid "" -#~ "If you don't want a bootable Mageia, but to chain-load it from another " -#~ "OS, click on <guibutton>Next</guibutton>, then on <guibutton>Advanced</" -#~ "guibutton> and tick the box <guilabel>Do not touch ESP or MBR</guilabel>." -#~ msgstr "" -#~ "若您不需要 Mageia 安装引导器，而是希望从其他系统引导 Mageia，请点击" -#~ "<guibutton>下一步</guibutton>，然后点击<guibutton>高级</guibutton>并勾选 " -#~ "<guilabel>不要修改 ESP 或 MBR</guilabel>。" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" " -#~ "align=\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" " -#~ "align=\"center\"/> </imageobject>" - -#~ msgid "" -#~ "You will get a warning that the bootloader is missing, ignore it by " -#~ "clicking <guibutton>OK</guibutton>." -#~ msgstr "" -#~ "安装程序将会提醒您缺少引导器，请忽略它并点击<guibutton>确定</guibutton>。" - -#~ msgid "First page" -#~ msgstr "第一页" - -#~ msgid "<guilabel>Advanced</guilabel>" -#~ msgstr "<guilabel>高级</guilabel>" - -#~ msgid "Next page" -#~ msgstr "下一页" - -#~ msgid "" -#~ "<guilabel>Probe foreign OS</guilabel>: see above <link linkend=" -#~ "\"setupMageiaBootloader\">Using a Mageia bootloader</link>" -#~ msgstr "" -#~ "<guilabel>探测其他系统</guilabel>：参见<link linkend=" -#~ "\"setupMageiaBootloader\">使用 Mageia 引导器</link>" - -#~ msgid "" -#~ "<emphasis role=\"bold\">Do not touch ESP or MBR</emphasis>: see above " -#~ "<link linkend=\"setupChainLoading\">Using the chain loading</link>" -#~ msgstr "" -#~ "<emphasis role=\"bold\">不要修改 ESP 或 MBR</emphasis>：参见<link linkend=" -#~ "\"setupChainLoading\">使用链式加载</link>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-setupSCSI.png\" " -#~ "align=\"center\" xml:id=\"setupSCSI-im1\" revision=\"1\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" " -#~ "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>" - -#~ msgid "DrakX should then be able to configure the drive(s) correctly." -#~ msgstr "随后 DrakX 应当能正确配置这些驱动器。" - -#~ msgid "" -#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" " -#~ "xml:id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" " -#~ "xml:id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "In this screen the name of the driver that the installer chose for your " -#~ "sound card is given, which will be the default driver if one exists." -#~ msgstr "" -#~ "这一界面中列出了安装程序为声卡选定的驱动，如果有默认驱动则将其作为默认配" -#~ "置。" - -#~ msgid "" -#~ "The default driver should work without problems. However, if after " -#~ "install you do encounter problems, then run <command>draksound</command> " -#~ "or start this tool via MCC (Mageia Control Center), by choosing the " -#~ "<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound " -#~ "Configuration</guilabel> at the top right of the screen." -#~ msgstr "" -#~ "默认驱动通常不会出问题。不过，如果您在安装后遇到问题，请运行 " -#~ "<command>draksound</command>，或通过 MCC（Mageia 控制中心）中<guilabel>硬" -#~ "件</guilabel>选项卡中的<guilabel>声音配置</guilabel>来启动 draksound。" - -#, fuzzy -#~ msgid "" -#~ "Then, in the <emphasis role=\"bold\">draksound</emphasis> or <emphasis " -#~ "role=\"bold\">Sound Configuration</emphasis> tool screen, click on " -#~ "<guibutton>Troubleshooting</guibutton> to find useful advice about how to " -#~ "solve the problem." -#~ msgstr "" -#~ "在 draksound 或“声音配置”工具界面，点击<guibutton>高级</guibutton>、" -#~ "<guibutton>故障排除</guibutton>来查看解决问题的建议。" - -#, fuzzy -#~ msgid "" -#~ "Clicking <emphasis role=\"bold\"><guibutton>Advanced</guibutton></" -#~ "emphasis> in this screen, during install, is useful if there is no " -#~ "default driver and there are several drivers available, but you think the " -#~ "installer selected the wrong one." -#~ msgstr "" -#~ "若没有默认驱动，或者默认驱动选择错误，则可以安装时点击此界面中的" -#~ "<guibutton>Advanced</guibutton>来更正。" - -#, fuzzy -#~ msgid "" -#~ "In that case you can select a different driver after clicking on " -#~ "<emphasis role=\"bold\"><guibutton>Let me pick any driver</guibutton></" -#~ "emphasis>." -#~ msgstr "" -#~ "`在这种情况下，您可以在点击<guibutton>让我选择任意驱动</guibutton>来选择其" -#~ "他驱动程序。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject condition=\"live\"> <imagedata format=\"PNG\" fileref=\"live-" -#~ "takeOverHdConfirm.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"classical\"> <imagedata format=\"PNG\" fileref=\"dx2-" -#~ "takeOverHdConfirm.png\" align=\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition='live'> <imagedata fileref=\"live-" -#~ "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </" -#~ "imageobject> <imageobject condition='classical'> <imagedata fileref=\"dx2-" -#~ "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </" -#~ "imageobject>" - -#~ msgid "" -#~ "You get this screen if you selected \"Boot Mageia\". If not, you get the " -#~ "\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\"" -#~ msgstr "" -#~ "如果选择了“引导Mageia”，您将看到此界面。如果没有，你将看到“<link linkend=" -#~ "\"doPartitionDisks\">分区</link>”界面。" - -#~ msgid "" -#~ "<guilabel>Password (again)</guilabel>: Retype the user password into this " -#~ "text box and drakx will check you have the same password in each of the " -#~ "user password text boxes." -#~ msgstr "" -#~ "<guilabel>密码（重复）</guilabel>：再输入依次用户密码。drakx 将会检查两次" -#~ "输入的密码是否一致。" - -#~ msgid "Additionally, you can disable or enable a guest account." -#~ msgstr "此外，您还可以禁用或启用来宾账户。" - -#~ msgid "" -#~ "Anything a guest with a default <emphasis>rbash</emphasis> guest account " -#~ "saves to his /home directory will be erased when he logs out. The guest " -#~ "should save his important files to a USB key." -#~ msgstr "" -#~ "任何使用<emphasis>rbash</emphasis>来宾账户创建的文件将会在注销后被删除。来" -#~ "宾应当将他/她的临时文件存储于 U 盘等设备中。" - -#~ msgid "" -#~ "<guilabel>Enable guest account</guilabel>: Here you can enable or disable " -#~ "a guest account. The guest account allows a guest to log into and use the " -#~ "PC, but he has more restricted access than normal users." -#~ msgstr "" -#~ "<guilabel>启用来宾账户</guilabel>：这里您可以启用或禁用来宾账户。来宾账户" -#~ "允许来宾登录并使用电脑，但对其使用更严格的访问权限控制。" - -#~ msgid "" -#~ "<guilabel>Group ID</guilabel>: This lets you set the group ID. Also a " -#~ "number, usually the same one as for the user. Leave it blank unless you " -#~ "know what you are doing." -#~ msgstr "" -#~ "<guilabel>组 ID</guilabel>：这里您可以设置之前所添加的用户的 组 ID（数值，" -#~ "一般与用户 ID 相同）。若您不确定如何设置，请将其留空。" - -#~ msgid "" -#~ "\"Device\", is made up of: \"hard drive\", [\"hard drive number" -#~ "\"(letter)], \"partition number\" (for example, \"sda5\")." -#~ msgstr "" -#~ "“设备名”包括：“硬盘驱动器”，[“硬盘驱动器编号”（由字母表示）]，“分区编号”。" -#~ "例如，“sda5”表示第一个 SCSI 设备上的第五个分区。" - -#~ msgid "Workstation." -#~ msgstr "工作区" - -#~ msgid "Server." -#~ msgstr "服务器。" - -#~ msgid "Graphical Environment." -#~ msgstr "图形界面环境" - -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=" -#~ "\"center\" format=\"PNG\" ></imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx2-choosePackagesTree.png\" align=" -#~ "\"center\" format=\"PNG\" ></imagedata> </imageobject>" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices." -#~ "png\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></" -#~ "imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureServices." -#~ "png\" align=\"center\" format=\"PNG\" xml:id=\"configureServices-im1\"></" -#~ "imagedata> </imageobject>" - -#~ msgid "" -#~ "There are four groups, click on the triangle before a group to expand it " -#~ "and see all services in it." -#~ msgstr "单击各组前的三角形图标可以展开该组中的服务。" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=" -#~ "\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" " -#~ "format=\"PNG\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" align=\"center\" xml:id=" -#~ "\"configureX_card_list-im1\" fileref=\"dx2-configureX_card_list.png\" " -#~ "format=\"PNG\"/> </imageobject>" - -#~ msgid "" -#~ "If you cannot find your card in the vendor lists (because it's not yet in " -#~ "the database or it's an older card) you may find a suitable driver in the " -#~ "Xorg category" -#~ msgstr "" -#~ "若您找不到所需的制造商列表（如显卡太老，或尚未加入到数据库中），您也可以" -#~ "在 Xorg 目录中找到合适的驱动" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser." -#~ "png\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> " -#~ "</imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-configureX_chooser." -#~ "png\" align=\"center\" format=\"PNG\" xml:id=\"configureX_chooser-im1\"> " -#~ "</imagedata> </imageobject>" - -#, fuzzy -#~ msgid "" -#~ "<imageobject condition=\"classical\"><imagedata fileref=\"dx2-" -#~ "doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject " -#~ "condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" " -#~ "align=\"center\"/></imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks2.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks2.png\" " -#~ "align=\"center\"/> </imageobject>" - -#~ msgid "" -#~ "The installer will share the available place out according to the " -#~ "following rules:" -#~ msgstr "安装程序将会根据下列规则使用可用空间：" - -#~ msgid "\"Align to\" \"MiB\"" -#~ msgstr "“对齐到”“MiB”" - -#~ msgid "\"Free space preceding (MiB)\" \"2\"" -#~ msgstr "“前面的自由空间（MiB）”“2”" - -#, fuzzy -#~ msgid "From this screen, it is possible to set some personal preferences:" -#~ msgstr "在此页中，可以进行自定义设置：" - -#~ msgid "" -#~ "The language (for the installation only, may be different that the chosen " -#~ "language for the system) by pressing the key F2 (Legacy mode only)" -#~ msgstr "" -#~ "按 F2 选择语言（仅用于安装，可能与系统所选语言有出入）（仅用于传统模式）。" - -#~ msgid "" -#~ "Here is for example, the French welcome screen when using a Live DVD/CD. " -#~ "Note that the Live DVD/CD menu does not propose: <guilabel>Rescue System</" -#~ "guilabel>, <guilabel>Memory test</guilabel> and <guilabel>Hardware " -#~ "Detection Tool</guilabel>." -#~ msgstr "" -#~ "此处给出了使用 Live DVD/CD 安装时法语版的欢迎界面。注意，Live DVD/CD 菜单" -#~ "中不包括：<guilabel>救援系统</guilabel>, <guilabel>内存测试</guilabel> " -#~ "and <guilabel>硬件检测工具</guilabel>。" - -#, fuzzy -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx-welcome4fr.png\" align=\"center\"/> " -#~ "</imageobject>" - -#~ msgid "" -#~ "Add some kernel options by pressing the <emphasis role=\"bold\">F6</" -#~ "emphasis> key for the legacy mode or the <emphasis role=\"bold\">e</" -#~ "emphasis> key for the UEFI mode." -#~ msgstr "" -#~ "按 <emphasis role=\"bold\">F6</emphasis> 键（传统模式下）或 <emphasis " -#~ "role=\"bold\">e</emphasis> 键（UEFI 模式下）可以添加内核参数。" - -#~ msgid "" -#~ "If the installation fails, then it may be necessary to try again using " -#~ "one of the extra options. The menu called by F6 displays a new line " -#~ "called <guilabel>Boot options</guilabel> and propose four entries:" -#~ msgstr "" -#~ "若安装失败，您可能需要尝试其他的选项。按 F6 键可以调出 <guilabel>引导选项" -#~ "</guilabel>，这里提供了四个选项：" - -#~ msgid "Add more kernel options by pressing the key F1 (Legacy mode only)." -#~ msgstr "按 F1 键可以添加更多内核参数（仅用于传统模式）。" - -#, fuzzy -#~ msgid "" -#~ "Here is the default welcome screen when using a Wired Network-based " -#~ "Installation CD (netinstall.iso or netinstall-nonfree.iso images):" -#~ msgstr "" -#~ "此处是使用有线网络安装 CD（Boot.iso 或 Boot-Nonfree.iso 镜像）安装时的默认" -#~ "欢迎界面：" - -#~ msgid "" -#~ "It does not allow to change the language, the available options are " -#~ "described in the screen. For more information about using a Wired Network-" -#~ "based Installation CD, see <link ns2:href=\"https://wiki.mageia.org/en/" -#~ "Boot.iso_install\">the Mageia Wiki</link>" -#~ msgstr "" -#~ "此处无法改变语言，界面中列出了可用的选项。有关使用有线网络安装 CD 来安装的" -#~ "更多细节，请参考 <link ns2:href=\"https://wiki.mageia.org/en/Boot." -#~ "iso_install\">Mageia Wiki</link>。" - -#~ msgid "The keyboard layout is the American one." -#~ msgstr "键盘布局为美式键盘。" - -#, fuzzy -#~ msgid "<imageobject> <imagedata fileref=\"../dx-help.png\"/> </imageobject>" -#~ msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png" -#~ "\" format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></" -#~ "imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-installUpdates.png" -#~ "\" format=\"PNG\" align=\"center\" xml:id=\"installUpdates-im1\"></" -#~ "imagedata> </imageobject>" - -#~ msgid "" -#~ "If selected, \"With X\" will also include IceWM as lightweight desktop " -#~ "environment." -#~ msgstr "若选中“包含 X”，将会同时选定 IceWM 作为轻量级的桌面环境。" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png" -#~ "\" align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></" -#~ "imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-minimal-install.png" -#~ "\" align=\"center\" format=\"PNG\" xml:id=\"minimal-install-im1\"></" -#~ "imagedata> </imageobject>" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " -#~ "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> " -#~ "</imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-securityLevel.png\" " -#~ "align=\"center\" format=\"PNG\" xml:id=\"securityLevel-im1\"></imagedata> " -#~ "</imageobject>" - -#~ msgid "You can adjust your security level here." -#~ msgstr "您可以在这里调整安全等级。" - -#~ msgid "" -#~ "Leave the default settings as they are, if you don't know what to choose." -#~ msgstr "若您不确定如何选择，请使用默认设置。" - -#~ msgid "" -#~ "LIVE media: you can boot the media in a real Mageia system without " -#~ "installing it, to see what you will get after installation. The " -#~ "installation process is simpler, but you get lesser choices." -#~ msgstr "" -#~ "Live 媒介：您无需实际安装即可实际体验 Mageia 系统，以便确定系统被安装之后" -#~ "的模样。这种安装的过程更加简单，但您可做的选择也相应减少。" - -#~ msgid "Boot-only CD media" -#~ msgstr "仅用于引导的 CD" - -#~ msgid "Check the radio button Save File." -#~ msgstr "点击“保存文件”选项。" - -#~ msgid "You can also use the dd tool in a console:" -#~ msgstr "您也可以在终端中使用 dd 工具：" - -#~ msgid "Unplug your USB stick, it is done" -#~ msgstr "操作完成，拔下 U 盘" - -#~ msgid "" -#~ "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align=" -#~ "\"center\" format=\"PNG\"></imagedata> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata fileref=\"dx2-selectInstallClass.png\" align=" -#~ "\"center\" format=\"PNG\"></imagedata> </imageobject>" - -#~ msgid "" -#~ "If you have one or more <application>Mageia</application> installations " -#~ "on your system, the installer will allow you to upgrade one of them to " -#~ "the latest release." -#~ msgstr "" -#~ "若您在电脑上安装了多个 <application>Mageia</application>，安装程序将会允许" -#~ "您选择需要升级的系统。" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" " -#~ "format=\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" fileref=\"dx2-setupSCSI.png\" " -#~ "format=\"PNG\" align=\"center\" xml:id=\"setupSCSI-im1\"></imagedata> </" -#~ "imageobject>" - -#~ msgid "Howto" -#~ msgstr "如何做" - -#~ msgid "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\" " -#~ "align=\"center\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-" -#~ "doPartitionDisks3.png\" align=\"center\"/> </imageobject> <imageobject " -#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\" " -#~ "align=\"center\"/> </imageobject>" - -#~ msgid "" -#~ "<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" " -#~ "align=\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </" -#~ "imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata xml:id=\"BId-drakx-intro-im1\" revision=\"1\" " -#~ "align=\"center\" format=\"PNG\" fileref=\"../dx-welcome.png\"/> </" -#~ "imageobject>" - -#~ msgid "" -#~ "<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align=" -#~ "\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>" -#~ msgstr "" -#~ "<imageobject> <imagedata revision=\"1\" xml:id=\"installer-im2\" align=" -#~ "\"center\" format=\"PNG\" fileref=\"../dx-help.png\"/> </imageobject>" -- cgit v1.2.1