#!/bin/bash # # configures aliases of device $1 # # This script goes out of its way to arrive at the configuration of ip # aliases described in the ifcfg-$DEV:* and ifcfg-$DEV-range* files from # whatever existing configuration it may be given: existing aliases not # specified in the configuration will be removed, netmasks and broadcast # addrs will be updated on existing aliases, and new aliases will be setup. # # range specification files: # # One can specify ranges of alised ipaddress using ifcfg-$DEV-range* files. # Specify multiple ranges using multiple files, such as ifcfg-eth0-range0 and # ifcfg-eth0-range1, etc. In these files, the following configuration variables # specify the range: # # IPADDR_START -- ipaddr to start range at. eg "192.168.30.1" # IPADDR_END -- ipaddr to end range at. eg "192.168.30.254" # CLONENUM_START -- interface clone number to start using for this range. eg "0" # # The above example values create the interfaces eth0:0 through eth0:253 using # ipaddrs 192.168.30.1 through 192.168.30.254, inclusive. # # Other configuration variables such as NETMASK and BROADCAST may be specified # in the range file and will apply to all of the ipaddresses in the range. Range # files also inherit configuration from the ifcfg-$DEV file just like normal. # # Note that IPADDR_START and IPADR_END are required to be in the same class-c # block. I.e. IPADDR_START=192.168.30.1 and IPADDR_END=192.168.31.255 is # not valid. # # speed with large sets of interfaces: # # Considerable effort was spent making this script fast. It can efficiently # handle a thousand ip aliases on one interface. # # With large sets of ipaddresses the NO_ALIASROUTING=yes configuration is # highly recommended. (This can be specified in ifcfg-$DEV and inherited.) This # prevents this script from setting up routing details for the virtual # interfaces, which I don't think is needed, because outgoing traffic can use the # main interface. However, make your own conclusions on what you need. # # My test setup of four class C address blocks on a P166 took 25 seconds of # which 16 seconds of this was spent in the ifcconfig calls. Without the # NO_ALIASROUTING=yes config an additional 12 seconds is spent in route calls. # # notes on internals: # # This script uses the bash "eval" command to lookup shell variables with names # which are generated from other shell variables. This allows us to, in effect, # create hashes using the shell variable namesspace by just including the hash # key in the name of the variable. # # This script originally written by: David Harris # Principal Engineer, DRH Internet # June 30, 1999 # # modified by: Bill Nottingham TEXTDOMAIN=initscripts TEXTDOMAINDIR=/etc/locale device=$1 if [ "$device" = "" ]; then echo $"usage: ifup-aliases []\n" exit 1 fi PARENTCONFIG=${2:-ifcfg-$device} parent_device=$device cd /etc/sysconfig/network-scripts . ./network-functions # Grab the current configuration of any running aliases device info is placed # into variables in the form: rdev_$DEVICE_addr, dev_$DEVICE_mb and # rdevip_$IPGLOP. A list of all the devices is created in rdev_LIST. eval $(LC_ALL= LANG= /sbin/ifconfig | LC_ALL=C sed -n ' # Alias name: store the number in TMP, ignore the following address if the # device name does not match. This may leave a hanging ||, so dummy X=x # comands are used to ignore a possible previous condition. /^[^[:space:]]*:[0-9A-Za-z_]*/ { s|^\([^:]*\):\([0-9A-Za-z_]*\).*$|X=x; TMP="\2"; [ "$device" != "\1" ] \|\| |p b } # Non-alias device: always ignore the following address /^[^[:space:]]/ { s|^.*$|X=x; true \|\| |p b } # Address: Preceded by a device name, which was converted into # condition || # So this triggers only for $device. # Add a trailing || (which will be swallowed by X=x) to keep the syntax # correct. /inet addr:[0-9]*\.[0-9]*\.[0-9]*\.[0-9]* *Bcast:[0-9.]* *Mask:[0-9.]*/ { s|^.*inet addr:\(\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\)\) *Bcast:\([0-9.]*\) *Mask:\([0-9.]*\).*$|eval "rdev_${TMP}_addr=\1; rdev_${TMP}_mb=\7_\6; rdevip_\2_\3_\4_\5=${TMP}; rdev_LIST=\\"\\$rdev_LIST \\${TMP}\\"; " \|\| |p b }') X=x if [ -z "$rdev_LIST" ]; then no_devices_are_up=yes fi ##for DEVNUM in $rdev_LIST ; do ##eval " ##echo \"rdev_${DEVNUM}_addr = \$rdev_${DEVNUM}_addr\" ##echo \"rdev_${DEVNUM}_mb = \$rdev_${DEVNUM}_mb\" "; ##done ##echo ""; echo "-----"; echo "" # # Store configuration of the parent device and network # # read from the /etc/sysconfig/network eval ` ( . /etc/sysconfig/network; echo network_GATEWAY=$GATEWAY\;; echo network_GATEWAYDEV=$GATEWAYDEV\;; ) ` # read defaults from the parent config file [ -f $PARENTCONFIG ] || { echo $"Missing config file $PARENTCONFIG." >&2 exit 1 } eval ` ( . ./$PARENTCONFIG; echo default_NETMASK=$NETMASK\;; echo default_BROADCAST=$BROADCAST\;; echo default_GATEWAY=$GATEWAY\;; echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;; ) ` [ -z "$default_GATEWAY" ] && default_GATEWAY=$network_GATEWAY function ini_env () { DEVICE="" IPADDR="" NETMASK=$default_NETMASK BROADCAST=$default_BROADCAST GATEWAY=$default_GATEWAY NO_ALIASROUTING=$default_NO_ALIASROUTING ONPARENT="" } function is_default_gateway () { LC_ALL=C /sbin/route -n \ | awk '$1 == "0.0.0.0" && $2 == "'"$1"'" { found = 1; } END { exit found == 0; }' } # # Read the alias configuration files and enable each aliased # device using new_interface() # function new_interface () { ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.}; IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}"; DEVNUM=${DEVICE#*:} MATCH='^[0-9A-Za-z_]*$' if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then echo $"error in $FILE: invalid alias number" >&2 return 1 fi eval " ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM}; ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE; "; if [ -n "$ipseen" ]; then echo $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" >&2 return 1 fi if [ -n "$devseen" ]; then echo $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" >&2 return 1 fi if [ -z "$DEVICE" -o -z "$IPADDR" ]; then echo $"error in $FILE: didn't specify device or ipaddr" >&2 return 1 fi if [ -z "$NETMASK" ]; then eval `/bin/ipcalc --netmask ${IPADDR}` fi if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then eval `/bin/ipcalc --broadcast ${IPADDR} ${NETMASK}` nma=$NETMASK; nmb=${nma#*.}; nmc=${nmb#*.}; NMGLOP="${nma%%.*}_${nmb%%.*}_${nmc%%.*}_${nmc#*.}"; if [ ${nma%%.*} -eq 0 ]; then ipnm_a=0; else ipnm_a=${ipa%%.*}; fi if [ ${nmb%%.*} -eq 0 ]; then ipnm_b=0; else ipnm_b=${ipb%%.*}; fi if [ ${nmc%%.*} -eq 0 ]; then ipnm_c=0; else ipnm_c=${ipc%%.*}; fi if [ ${nmc#*.} -eq 0 ]; then ipnm_d=0; else ipnm_d=${ipc#*.}; fi CACHENAME="${NMGLOP}_${ipnm_a}_${ipnm_b}_${ipnm_c}_${ipnm_d}" eval " if [ -z \"\$bcastcache_${CACHENAME}\" ]; then eval `/bin/ipcalc --broadcast \$IPADDR \$NETMASK` bcastcache_${CACHENAME}=\$BROADCAST else BROADCAST=\$bcastcache_${CACHENAME} fi "; fi ##echo ""; ##echo "----------------------------" ##echo "device = $DEVICE" ##echo "ipaddr = $IPADDR" ##echo "netmask = $NETMASK" ##echo "broadcast = $BROADCAST" ##echo "devnum = $DEVNUM"; ##echo ""; if [ "$no_devices_are_up" = "yes" ]; then setup_this=yes else setup_this="" eval " rdev_addr=\$rdev_${DEVNUM}_addr; rdev_mb=\$rdev_${DEVNUM}_mb; rdev_mark=\$rdev_${DEVNUM}_mark; rdevip=\$rdevip_${IPGLOP}; "; if [ -n "$rdev_addr" ]; then if [ "$rdev_addr" = "${IPADDR}" ]; then newmark=keep if [ "$rdev_mb" != "${NETMASK}_${BROADCAST}" ]; then setup_this=freshen else setup_this=no fi else if [ "$rdev_mark" != "remove" ]; then ##echo "removing device $parent_device:${DEVNUM} (devnum conflict)" /sbin/ifconfig $parent_device:${DEVNUM} down do_netreport=yes fi newmark=remove setup_this=yes fi if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then echo $"error in ifcfg-${parent_device}: files" >&2 return 1 fi eval " rdev_${DEVNUM}_mark=\$newmark "; else setup_this=yes fi if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then eval " mark_remove=\$rdev_${rdevip}_mark "; if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then echo $"error in ifcfg-${parent_device}: files" >&2 return 1 fi if [ "$mark_remove" != "remove" ]; then eval " rdev_${rdevip}_mark=remove "; ##echo "removing device $parent_device:$rdevip (ipaddr conflict)" /sbin/ifconfig $parent_device:$rdevip down do_netreport=yes fi fi fi if [ "$setup_this" = "freshen" ] ; then # we can do the freshen stuff right now ##echo "freshening device $DEVICE" /sbin/ifconfig $DEVICE netmask $NETMASK broadcast $BROADCAST; fi if [ "$setup_this" = "yes" ] ; then ##echo "setting up device $DEVICE" /sbin/ifconfig ${DEVICE} ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST} if [ "$NO_ALIASROUTING" != yes ]; then GATEWAYDEV=$network_GATEWAYDEV; if [ -n "${GATEWAY}" -a \ \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then # set up default gateway, if it isn't already there if ! is_default_gateway "$GATEWAY"; then route add default gw ${GATEWAY} \ ${METRIC:+metric $METRIC} ${DEVICE} fi fi /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME} do_netreport=yes ifuplocal_queue="$ifuplocal_queue $DEVICE" fi fi } if [ "$BASH_VERSINFO" ]; then shopt -s nullglob; else allow_null_glob_expansion=foo; fi for FILE in ifcfg-${parent_device}:* ; do is_ignored_file "$FILE" && continue ini_env; . ./$FILE; [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-} [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface; unset DEVICE done for FILE in ifcfg-${parent_device}-range* ; do is_ignored_file "$FILE" && continue ini_env; . ./$FILE; ipaddr_prefix=${IPADDR_START%.*} ipaddr_startnum=${IPADDR_START##*.} ipaddr_endnum=${IPADDR_END##*.} if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then echo $"error in $FILE: IPADDR_START and IPADDR_END don't agree" >&2; continue fi if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then echo $"error in $FILE: IPADDR_START greater than IPADDR_END" >&2; continue fi ipaddr_num=$ipaddr_startnum ipaddr_clonenum=$CLONENUM_START while [ $ipaddr_num -le $ipaddr_endnum ]; do IPADDR="$ipaddr_prefix.$ipaddr_num" DEVICE="$parent_device:$ipaddr_clonenum" [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface; let 'ipaddr_num=ipaddr_num+1' let 'ipaddr_clonenum=ipaddr_clonenum+1' done done # # Remove any devices that should not be around # for DEVNUM in $rdev_LIST ; do eval " rdev_mark=\$rdev_${DEVNUM}_mark "; if [ -z "$rdev_mark" ]; then ##echo "removing device $parent_device:${DEVNUM} (lingering)" /sbin/ifconfig $parent_device:${DEVNUM} down do_netreport=yes fi done # # Notify of new device creation # if [ -n "$do_netreport" ]; then do_netreport fi if [ -x /sbin/ifup-local ]; then for DEVICE in $ifuplocal_queue ; do /sbin/ifup-local ${DEVICE} done fi