#! /bin/bash
#
# network       Bring up/down networking
#
# chkconfig: 2345 10 90
# description: Activates/Deactivates all network interfaces configured to \
#              start at boot time.
#
### BEGIN INIT INFO
# Provides: $network
### END INIT INFO

# Source function library.
. /etc/init.d/functions

if [ ! -f /etc/sysconfig/network ]; then
    exit 0
fi

. /etc/sysconfig/network

if [ -f /etc/sysconfig/pcmcia ]; then
	. /etc/sysconfig/pcmcia
fi


# Check that networking is up.
[ "${NETWORKING}" = "no" ] && exit 0

# if the ip configuration utility isn't around we can't function.
[ -x /sbin/ip ] || exit 1

# Even if IPX is configured, without the utilities we can't do much
[ ! -x /sbin/ipx_internal_net -o ! -x /sbin/ipx_configure ] && IPX=

# Even if VLAN is configured, without the utility we can't do much
[ ! -x /sbin/vconfig ] && VLAN=

CWD=`pwd`
cd /etc/sysconfig/network-scripts

. network-functions

# find all the interfaces besides loopback.
# ignore aliases, alternative configurations, and editor backup files
interfaces=`ls ifcfg* | LANG=C egrep -v '(ifcfg-lo|:|-range|rpmsave|rpmorig|rpmnew)' | \
	    LANG=C egrep -v '(~|\.bak)$' | \
            LANG=C egrep 'ifcfg-[A-Za-z0-9\._-]+$' | \
            sed 's/^ifcfg-//g' |
            sed 's/[0-9]/ &/' | LANG=C sort -k 1,1 -k 2n | sed 's/ //'`

# See how we were called.
case "$1" in
  start)
	# IPv6 hook (pre IPv4 start)
	if [ "$NETWORKING_IPV6" = "yes" ]; then
		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
			/etc/sysconfig/network-scripts/init.ipv6-global start pre
		fi
	fi
  
  	action $"Setting network parameters: " sysctl -e -p /etc/sysctl.conf

	# bring up loopback interface
	action $"Bringing up loopback interface: " ./ifup ifcfg-lo

	case "$IPX" in
	  yes|true)
	    /sbin/ipx_configure --auto_primary=$IPXAUTOPRIMARY \
				   --auto_interface=$IPXAUTOFRAME
	    if [ "$IPXINTERNALNETNUM" != "0" ]; then
	       /sbin/ipx_internal_net add $IPXINTERNALNETNUM $IPXINTERNALNODENUM
	    fi
	    ;;
	esac

	case "$VLAN" in
	  yes)
	    if [ -d /proc/net/vlan ] || modprobe 8021q >/dev/null 2>&1 ; then
		action $"Setting 802.1Q VLAN parameters: " /sbin/vconfig set_name_type DEV_PLUS_VID_NO_PAD
	    else
		echo $"No 802.1Q VLAN support available in kernel."
	    fi
	    ;;
	esac

	oldhotplug=`sysctl kernel.hotplug  2>/dev/null | \
	    awk '{ print $3 }' 2>/dev/null`
	sysctl -w kernel.hotplug="/etc/hotplug/firmware.agent" > /dev/null 2>&1

	vlaninterfaces=""
	cipeinterfaces=""
	xdslinterfaces=""
	bridgeinterfaces=""

	# bring up all other interfaces configured to come up at boot time
	for i in $interfaces; do
		eval $(LANG=C fgrep "DEVICE=" ifcfg-$i)
		eval $(LANG=C fgrep "TYPE=" ifcfg-$i)
		eval $(LANG=C fgrep "SLAVE=" ifcfg-$i)
		eval $(LANG=C fgrep "BRIDGE=" ifcfg-$i)
		
		if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

		if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
			cipeinterfaces="$cipeinterfaces $i"
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi
		if [ "$TYPE" = "xDSL" ]; then
		        xdslinterfaces="$xdslinterfaces $i"
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi
		
		if [ -n "$BRIDGE" ]; then
			is_available $i
		        bridgeinterfaces="$bridgeinterfaces $i"
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi

		if [ "${DEVICE%%.*}" != "$DEVICE" ] ; then
			vlaninterfaces="$vlaninterfaces $i"
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi
		
		if [ "$SLAVE" = "yes" ]; then
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi
		unset DEVICE TYPE SLAVE BRIDGE
	
		if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ifcfg-$i > /dev/null ; then
		        # this loads the module, to preserve ordering
			is_available $i
			continue
		fi
		# If we're in confirmation mode, get user confirmation.
		if [ -f /var/run/confirm ]; then
			confirm $i
			test $? = 1 && continue
		fi
		action $"Bringing up interface $i: " ./ifup $i boot
	done
	
	# Bring up xDSL and CIPE interfaces
	for i in $vlaninterfaces $bridgeinterfaces $xdslinterfaces $cipeinterfaces ; do 
            if ! LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ifcfg-$i >/dev/null 2>&1 ; then
		# If we're in confirmation mode, get user confirmation.
		if [ -f /var/run/confirm ]; then
			confirm $i
			test $? = 1 && continue
		fi
		action $"Bringing up interface $i: " ./ifup $i boot
	    fi
        done

	sysctl -w kernel.hotplug=$oldhotplug > /dev/null 2>&1
	
	# Add non interface-specific static-routes.
	if [ -f /etc/sysconfig/static-routes ]; then
	   grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do
              /sbin/route add -$args
	   done
	fi    

 	# IPv6 hook (post IPv4 start)
 	if [ "$NETWORKING_IPV6" = "yes" ]; then
 		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
 			/etc/sysconfig/network-scripts/init.ipv6-global start post
 		fi
 	fi
	# Run this again to catch any interface-specific actions
	sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
 
        touch /var/lock/subsys/network
        ;;
  stop)
  	# If this is a final shutdown/halt, check for network FS,
	# and unmount them even if the user didn't turn on netfs
	
	if [ "$RUNLEVEL" = "6" -o "$RUNLEVEL" = "0" -o "$RUNLEVEL" = "1" ]; then
		NFSMTAB=`LC_ALL=C awk '!/^#/ && $3  ~ /^nfs/ { print $2 }' /proc/mounts`
		SMBMTAB=`LC_ALL=C awk '!/^#/ && $3 == "smbfs" { print $2 }' /proc/mounts`
		NCPMTAB=`LC_ALL=C awk '!/^#/ && $3 == "ncpfs" { print $2 }' /proc/mounts`
		if [ -n "$NFSMTAB" -o -n "$SMBMTAB" -o -n "$NCPMTAB" ] ; then
			/etc/init.d/netfs stop
		fi
	fi
	
 	# IPv6 hook (pre IPv4 stop)
 	if [ "$NETWORKING_IPV6" = "yes" ]; then
 		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
 			/etc/sysconfig/network-scripts/init.ipv6-global stop pre
 		fi
 	fi
 
	vlaninterfaces=""
	cipeinterfaces=""
	xdslinterfaces=""
	bridgeinterfaces=""
	remaining=""

	# get list of bonding, cipe, and xdsl interfaces
	for i in $interfaces; do
		eval $(LANG=C fgrep "DEVICE=" ifcfg-$i)
		eval $(LANG=C fgrep "TYPE=" ifcfg-$i)
		eval $(LANG=C fgrep "BRIDGE=" ifcfg-$i)
		
		if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

		if [ "${DEVICE##cipcb}" != "$DEVICE" ] ; then
			cipeinterfaces="$cipeinterfaces $i"
			unset DEVICE TYPE BRIDGE
			continue
		fi
		if [ -n "$BRIDGE" ]; then
		        bridgeinterfaces="$bridgeinterfaces $i"
			unset DEVICE TYPE BRIDGE
		        continue
		fi
		if [ "$TYPE" = "xDSL" ]; then
		        xdslinterfaces="$xdslinterfaces $i"
			unset DEVICE TYPE BRIDGE
			continue
		fi

		if [ "${DEVICE%%.*}" != "$DEVICE" ] ; then
			vlaninterfaces="$vlaninterfaces $i"
			unset DEVICE TYPE SLAVE BRIDGE
			continue
		fi
		remaining="$remaining $i"
		unset DEVICE TYPE BRIDGE
	done
	
	for i in $cipeinterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces; do
		eval $(fgrep "DEVICE=" ifcfg-$i)
		if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

		if ! check_device_down $DEVICE; then
		   action $"Shutting down interface $i: " ./ifdown $i boot
		fi
	done
	
	# shut down all interfaces (other than loopback)
	for i in $remaining ; do
		eval $(fgrep "DEVICE=" ifcfg-$i)
		if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi

		if ! check_device_down $DEVICE; then
		   action $"Shutting down interface $i: " ./ifdown $i boot
		fi
	done
	case "$IPX" in
	  yes|true)
	    if [ "$IPXINTERNALNETNUM" != "0" ]; then
	       /sbin/ipx_internal_net del
	    fi
	    ;;
	esac

	action $"Shutting down loopback interface: " ./ifdown ifcfg-lo

	if [ -d /proc/sys/net/ipv4 ]; then
	  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
		if [ `cat /proc/sys/net/ipv4/ip_forward` != 0 ]; then
			action $"Disabling IPv4 packet forwarding: " sysctl -w net.ipv4.ip_forward=0
		fi
	  fi
	  if [ -f /proc/sys/net/ipv4/ip_always_defrag ]; then
	        if [ `cat /proc/sys/net/ipv4/ip_always_defrag` != 0 ]; then
		        action $"Disabling IPv4 automatic defragmentation: " sysctl -w net.ipv4.ip_always_defrag=0
		fi
	  fi
	fi

	# IPv6 hook (post IPv4 stop)
	if [ "$NETWORKING_IPV6" = "yes" ]; then
		if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
			/etc/sysconfig/network-scripts/init.ipv6-global stop post
		fi
	fi
	
        rm -f /var/lock/subsys/network
        ;;
  status)
	echo $"Configured devices:"
	echo lo $interfaces

	echo $"Currently active devices:"
	echo `/sbin/ip -o link show | awk -F ": " '/UP>/ { print $2 }'`
	;;
  restart|reload)
        cd "$CWD"
	$0 stop
	$0 start
	;;
  *)
        echo $"Usage: $0 {start|stop|restart|reload|status}"
        exit 1
esac

exit 0