From f280984f691e0c3cbca2b31dad7a32a5c66ab51b Mon Sep 17 00:00:00 2001
From: Harald Hoyer <harald@redhat.com>
Date: Tue, 5 Oct 2010 12:36:37 +0200
Subject: add systemd services

---
 rc.d/rc.sysinit | 657 +-------------------------------------------------------
 1 file changed, 2 insertions(+), 655 deletions(-)

(limited to 'rc.d/rc.sysinit')

diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
index ff003e92..777dae31 100755
--- a/rc.d/rc.sysinit
+++ b/rc.d/rc.sysinit
@@ -2,659 +2,6 @@
 #
 # /etc/rc.d/rc.sysinit - run once at boot time
 #
-# Taken in part from Miquel van Smoorenburg's bcheckrc.
-#
-
-HOSTNAME=$(/bin/hostname)
-
-set -m
-
-if [ -f /etc/sysconfig/network ]; then
-    . /etc/sysconfig/network
-fi
-if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
-    HOSTNAME=localhost
-fi
-
-if [ ! -e /proc/mounts ]; then
-	mount -n -t proc /proc /proc
-	mount -n -t sysfs /sys /sys >/dev/null 2>&1
-fi
-if [ ! -d /proc/bus/usb ]; then
-	modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-else
-	mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-fi
-
-. /etc/init.d/functions
-
-PLYMOUTH=
-[ -x /usr/bin/plymouth ] && PLYMOUTH=yes
-
-# Check SELinux status
-SELINUX_STATE=
-if [ -e "/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
-	if [ -r "/selinux/enforce" ] ; then
-		SELINUX_STATE=$(cat "/selinux/enforce")
-	else
-		# assume enforcing if you can't read it
-		SELINUX_STATE=1
-	fi
-fi
-
-if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then
-	/sbin/restorecon  -R /dev 2>/dev/null
-fi
-
-disable_selinux() {
-	echo $"*** Warning -- SELinux is active"
-	echo $"*** Disabling security enforcement for system recovery."
-	echo $"*** Run 'setenforce 1' to reenable."
-	echo "0" > "/selinux/enforce"
-}
-
-relabel_selinux() {
-    # if /sbin/init is not labeled correctly this process is running in the
-    # wrong context, so a reboot will be required after relabel
-    AUTORELABEL=
-    . /etc/selinux/config
-    echo "0" > /selinux/enforce
-    [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
-    if [ "$AUTORELABEL" = "0" ]; then
-	echo
-	echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required. "
-	echo $"*** /etc/selinux/config indicates you want to manually fix labeling"
-	echo $"*** problems. Dropping you to a shell; the system will reboot"
-	echo $"*** when you leave the shell."
-	sulogin
-
-    else
-	echo
-	echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required."
-	echo $"*** Relabeling could take a very long time, depending on file"
-	echo $"*** system size and speed of hard drives."
-
-	/sbin/fixfiles -F restore > /dev/null 2>&1
-    fi
-    rm -f  /.autorelabel
-    echo $"Unmounting file systems"
-    umount -a
-    mount -n -o remount,ro /
-    echo $"Automatic reboot in progress."
-    reboot -f
-}
-
-# Print a text banner.
-echo -en $"\t\tWelcome to "
-read -r system_release < /etc/system-release
-if [[ "$system_release" == *"Red Hat"* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
- echo -en "Red Hat"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Red Hat \(.*\) release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-elif [[ "$system_release" == *Fedora* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;34m"
- echo -en "Fedora"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Fedora \(.*\) \?release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-else
- PRODUCT=$(sed "s/ release.*//g" /etc/system-release)
- echo "$PRODUCT"
-fi
-
-# Only read this once.
-cmdline=$(cat /proc/cmdline)
-
-# Initialize hardware
-if [ -f /proc/sys/kernel/modprobe ]; then
-   if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
-       sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
-   else
-       # We used to set this to NULL, but that causes 'failed to exec' messages"
-       sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
-   fi
-fi
-
-touch /dev/.in_sysinit >/dev/null 2>&1
-
-# Set default affinity
-if [ -x /bin/taskset ]; then
-   if strstr "$cmdline" default_affinity= ; then
-     for arg in $cmdline ; do
-         if [ "${arg##default_affinity=}" != "${arg}" ]; then
-             /bin/taskset -p ${arg##default_affinity=} 1
-         fi
-     done
-   fi
-fi
-
-nashpid=$(pidof nash 2>/dev/null)
-[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
-unset nashpid
-/sbin/start_udev
-
-# Load other user-defined modules
-for file in /etc/sysconfig/modules/*.modules ; do
-  [ -x $file ] && $file
+for i in /etc/rc.d/rcS.d/*.sh; do
+	. $i
 done
-
-# Load modules (for backward compatibility with VARs)
-if [ -f /etc/rc.modules ]; then
-	/etc/rc.modules
-fi
-
-mount -n /dev/pts >/dev/null 2>&1
-[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
-
-# Configure kernel parameters
-update_boot_stage RCkernelparam
-sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
-
-# Set the hostname.
-update_boot_stage RChostname
-action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
-
-# Sync waiting for storage.
-{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
-
-# Device mapper & related initialization
-if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
-       modprobe dm-mod >/dev/null 2>&1
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 0
-fi
-
-if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \
-		[ -x /sbin/multipath ]; then
-	modprobe dm-multipath > /dev/null 2>&1
-	/sbin/multipath -v 0
-	if [ -x /sbin/kpartx ]; then
-		/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null
-	fi
-fi
-
-if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
-	modprobe dm-mirror >/dev/null 2>&1
-	dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
-	if [ "$?" = "0" ]; then
-		for dmname in $dmraidsets; do
-			if [[ "$dmname" == isw_* ]] && \
-			   ! strstr "$cmdline" noiswmd; then
-				continue
-			fi
-			/sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
-			/sbin/kpartx -a -p p "/dev/mapper/$dmname"
-		done
-	fi
-fi
-
-# Start any MD RAID arrays that haven't been started yet
-[ -r /proc/mdstat -a -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
-
-if [ -x /sbin/lvm ]; then
-	action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --sysinit
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 0
-fi
-
-if [ -f /fastboot ] || strstr "$cmdline" fastboot ; then
-	fastboot=yes
-fi
-
-if [ -f /fsckoptions ]; then
-	fsckoptions=$(cat /fsckoptions)
-fi
-
-if [ -f /forcefsck ] || strstr "$cmdline" forcefsck ; then
-	fsckoptions="-f $fsckoptions"
-elif [ -f /.autofsck ]; then
-	[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
-	if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
-		AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
-	fi
-	if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
-		[ -n "$PLYMOUTH" ] && plymouth --hide-splash
-		echo
-		echo $"*** Warning -- the system did not shut down cleanly. "
-		echo $"*** Dropping you to a shell; the system will continue"
-		echo $"*** when you leave the shell."
-		[ -n "$SELINUX_STATE" ] && echo "0" > /selinux/enforce
-		sulogin
-		[ -n "$SELINUX_STATE" ] && echo "1" > /selinux/enforce
-		[ -n "$PLYMOUTH" ] && plymouth --show-splash
-	fi
-	fsckoptions="$AUTOFSCK_OPT $fsckoptions"
-fi
-
-if [ "$BOOTUP" = "color" ]; then
-	fsckoptions="-C $fsckoptions"
-else
-	fsckoptions="-V $fsckoptions"
-fi
-
-READONLY=
-if [ -f /etc/sysconfig/readonly-root ]; then
-	. /etc/sysconfig/readonly-root
-fi
-if strstr "$cmdline" readonlyroot ; then
-	READONLY=yes
-	[ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
-	[ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state
-fi
-if strstr "$cmdline" noreadonlyroot ; then
-	READONLY=no
-fi
-
-if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
-
-	mount_empty() {
-		if [ -e "$1" ]; then
-			echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	mount_dirs() {
-		if [ -e "$1" ]; then
-			mkdir -p "$RW_MOUNT$1"
-			find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	mount_files() {
-		if [ -e "$1" ]; then
-			cp -a --parents "$1" "$RW_MOUNT"
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	# Common mount options for scratch space regardless of
-	# type of backing store
-	mountopts=
-
-	# Scan partitions for local scratch storage
-	rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
-
-	# First try to mount scratch storage from /etc/fstab, then any
-	# partition with the proper label.  If either succeeds, be sure
-	# to wipe the scratch storage clean.  If both fail, then mount
-	# scratch storage via tmpfs.
-	if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
-		rm -rf "$RW_MOUNT" > /dev/null 2>&1
-	elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then
-		rm -rf "$RW_MOUNT"  > /dev/null 2>&1
-	else
-		mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT"
-	fi
-
-	for file in /etc/rwtab /etc/rwtab.d/* /dev/.initramfs/rwtab ; do
-		is_ignored_file "$file" && continue
-	[ -f $file ] && cat $file | while read type path ; do
-			case "$type" in
-				empty)
-					mount_empty $path
-					;;
-				files)
-					mount_files $path
-					;;
-				dirs)
-					mount_dirs $path
-					;;
-				*)
-					;;
-			esac
-			[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-		done
-	done
-
-	# Use any state passed by initramfs
-	[ -d /dev/.initramfs/state ] && cp -a /dev/.initramfs/state/* $RW_MOUNT
-
-	# In theory there should be no more than one network interface active
-	# this early in the boot process -- the one we're booting from.
-	# Use the network address to set the hostname of the client.  This
-	# must be done even if we have local storage.
-	ipaddr=
-	if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
-		ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }')
-		for ip in $ipaddr ; do
-			HOSTNAME=
-			eval $(ipcalc -h $ipaddr 2>/dev/null)
-			[ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; }
-		done
-	fi
-	
-	# Clients with read-only root filesystems may be provided with a
-	# place where they can place minimal amounts of persistent
-	# state.  SSH keys or puppet certificates for example.
-	#
-	# Ideally we'll use puppet to manage the state directory and to
-	# create the bind mounts.  However, until that's all ready this
-	# is sufficient to build a working system.
-
-	# First try to mount persistent data from /etc/fstab, then any
-	# partition with the proper label, then fallback to NFS
-	state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
-	if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
-		/bin/true
-	elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1;  then
-		/bin/true
-	elif [ ! -z "$CLIENTSTATE" ]; then
-		# No local storage was found.  Make a final attempt to find
-		# state on an NFS server.
-
-		mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
-	fi
-
-	if [ -w "$STATE_MOUNT" ]; then
-
-		mount_state() {
-			if [ -e "$1" ]; then
-				[ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT"
-				mount -n --bind "$STATE_MOUNT$1" "$1"
-			fi
-		}
-
-		for file in /etc/statetab /etc/statetab.d/* ; do
-			is_ignored_file "$file" && continue
-			[ ! -f "$file" ] && continue
-
-			if [ -f "$STATE_MOUNT/$file" ] ; then
-				mount -n --bind "$STATE_MOUNT/$file" "$file"
-			fi
-
-			for path in $(grep -v "^#" "$file" 2>/dev/null); do
-				mount_state "$path"
-				[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-			done
-		done
-
-		if [ -f "$STATE_MOUNT/files" ] ; then
-			for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do
-				mount_state "$path"
-				[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-			done
-		fi
-	fi
-fi
-
-if [[ " $fsckoptions" != *" -y"* ]]; then
-	fsckoptions="-a $fsckoptions"
-fi
-
-_RUN_QUOTACHECK=0
-if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
-	_RUN_QUOTACHECK=1
-fi
-if [ -z "$fastboot" -a "$READONLY" != "yes" ]; then
-
-        STRING=$"Checking filesystems"
-	echo $STRING
-	fsck -T -t noopts=_netdev -A $fsckoptions
-	rc=$?
-	
-	if [ "$rc" -eq "0" ]; then
-		success "$STRING"
-		echo
-	elif [ "$rc" -eq "1" ]; then
-	        passed "$STRING"
-		echo
-	elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
-		echo $"Unmounting file systems"
-		umount -a
-		mount -n -o remount,ro /
-		echo $"Automatic reboot in progress."
-		reboot -f
-        fi
-	
-        # A return of 4 or higher means there were serious problems.
-	if [ $rc -gt 1 ]; then
-		[ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
-		failure "$STRING"
-		echo
-		echo
-		echo $"*** An error occurred during the file system check."
-		echo $"*** Dropping you to a shell; the system will reboot"
-		echo $"*** when you leave the shell."
-
-                str=$"(Repair filesystem)"
-		PS1="$str \# # "; export PS1
-		[ "$SELINUX_STATE" = "1" ] && disable_selinux
-		sulogin
-
-		echo $"Unmounting file systems"
-		umount -a
-		mount -n -o remount,ro /
-		echo $"Automatic reboot in progress."
-		reboot -f
-	elif [ "$rc" -eq "1" ]; then
-		_RUN_QUOTACHECK=1
-	fi
-fi
-
-remount_needed() {
-  local state oldifs
-  [ "$READONLY" = "yes" ] && return 1
-  state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts)
-  oldifs=$IFS
-  IFS=","
-  for opt in $state ; do
-	if [ "$opt" = "rw" ]; then
-		IFS=$oldifs
-		return 1
-	fi
-  done
-  IFS=$oldifs
-  return 0
-}
-
-# Remount the root filesystem read-write.
-update_boot_stage RCmountfs
-if remount_needed ; then
-  action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
-fi
-
-# Clean up SELinux labels
-if [ -n "$SELINUX_STATE" ]; then
-   restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
-fi
-
-# If relabeling, relabel mount points.
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
-    if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
-	restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
-    fi
-fi
-
-if [ "$READONLY" != "yes" ] ; then
-	# Clear mtab
-	(> /etc/mtab) &> /dev/null
-
-	# Remove stale backups
-	rm -f /etc/mtab~ /etc/mtab~~
-
-	# Enter mounted filesystems into /etc/mtab
-	mount -f /
-	mount -f /proc >/dev/null 2>&1
-	mount -f /sys >/dev/null 2>&1
-	mount -f /dev/pts >/dev/null 2>&1
-	mount -f /dev/shm >/dev/null 2>&1
-	mount -f /proc/bus/usb >/dev/null 2>&1
-fi
-
-# Mount all other filesystems (except for NFS and /proc, which is already
-# mounted). Contrary to standard usage,
-# filesystems are NOT unmounted in single user mode.
-if [ "$READONLY" != "yes" ] ; then
-	action $"Mounting local filesystems: " mount -a -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-else
-	action $"Mounting local filesystems: " mount -a -n -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-fi
-
-# Update quotas if necessary
-if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
-	action $"Checking local filesystem quotas: " /sbin/quotacheck -anug
-fi
-
-if [ -x /sbin/quotaon ]; then
-    action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
-fi
-
-# Check to see if a full relabel is needed
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
-    if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
-	relabel_selinux
-    fi
-else
-    if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then
-        [ -f /.autorelabel ] || touch /.autorelabel
-    fi
-fi
-
-# Initialize pseudo-random number generator
-if [ -f "/var/lib/random-seed" ]; then
-	cat /var/lib/random-seed > /dev/urandom
-else
-	[ "$READONLY" != "yes" ] && touch /var/lib/random-seed
-fi
-if [ "$READONLY" != "yes" ]; then
-	chmod 600 /var/lib/random-seed
-	dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 1
-fi
-
-# Configure machine if necessary.
-if [ -f /.unconfigured ]; then
-    if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
-	/usr/bin/rhgb-client --quit
-    fi
-
-    if [ -x /usr/bin/system-config-keyboard ]; then
-	/usr/bin/system-config-keyboard
-    fi
-    if [ -x /usr/bin/passwd ]; then
-        /usr/bin/passwd root
-    fi
-    if [ -x /usr/sbin/system-config-network-tui ]; then
-	/usr/sbin/system-config-network-tui
-    fi
-    if [ -x /usr/sbin/timeconfig ]; then
-	/usr/sbin/timeconfig
-    fi
-    if [ -x /usr/sbin/authconfig-tui ]; then
-	/usr/sbin/authconfig-tui --nostart
-    fi
-    if [ -x /usr/sbin/ntsysv ]; then
-	/usr/sbin/ntsysv --level 35
-    fi
-
-    # Reread in network configuration data.
-    if [ -f /etc/sysconfig/network ]; then
-	. /etc/sysconfig/network
-
-	# Reset the hostname.
-	action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
-    fi
-
-    rm -f /.unconfigured
-fi
-
-# Clean out /.
-rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
-	/poweroff /.suspended &> /dev/null
-
-# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
-_NEED_XFILES=
-[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1
-
-# Clean up /var.
-rm -rf /var/lock/cvs/* /var/run/screen/*
-find /var/lock /var/run ! -type d -exec rm -f {} \;
-rm -f /var/lib/rpm/__db* &> /dev/null
-rm -f /var/gdm/.gdmfifo &> /dev/null
-
-# Clean up utmp/wtmp
-> /var/run/utmp
-touch /var/log/wtmp /var/log/btmp
-chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp
-chmod 0664 /var/run/utmp /var/log/wtmp
-chmod 0600 /var/log/btmp
-if [ -n "$_NEED_XFILES" ]; then
-  > /var/run/utmpx
-  touch /var/log/wtmpx
-  chgrp utmp /var/run/utmpx /var/log/wtmpx
-  chmod 0664 /var/run/utmpx /var/log/wtmpx
-fi
-[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* >/dev/null 2>&1
-
-# Clean up various /tmp bits
-[ -n "$SELINUX_STATE" ] && restorecon /tmp
-rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
-rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
-       /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-*  \
-       /tmp/scrollkeeper-*  /tmp/ssh-* \
-       /dev/.in_sysinit
-
-# Make ICE directory
-mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
-chown root:root /tmp/.ICE-unix
-[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
-
-# Start up swapping.
-update_boot_stage RCswap
-action $"Enabling /etc/fstab swaps: " swapon -a -e
-if [ "$AUTOSWAP" = "yes" ]; then
-	curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
-	swappartitions=$(blkid -t TYPE=swap -o device)
-	if [ x"$swappartitions" != x ]; then
-		for partition in $swappartitions ; do
-			[ ! -e $partition ] && continue
-			majmin=$(get_numeric_dev dec $partition)
-			echo $curswap | grep -qw "$majmin" || action $"Enabling local swap partitions: " swapon $partition
-		done
-	fi
-fi
-
-# Set up binfmt_misc
-/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
-
-# Boot time profiles. Yes, this should be somewhere else.
-if [ -x /usr/sbin/system-config-network-cmd ]; then
-  if strstr "$cmdline" netprofile= ; then
-    for arg in $cmdline ; do
-        if [ "${arg##netprofile=}" != "${arg}" ]; then
-	    /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
-        fi
-    done
-  fi
-fi
-
-# Now that we have all of our basic modules loaded and the kernel going,
-# let's dump the syslog ring somewhere so we can find it later
-[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
-dmesg -s 131072 > /var/log/dmesg
-
-# create the crash indicator flag to warn on crashes, offer fsck with timeout
-touch /.autofsck &> /dev/null
-
-if strstr "$cmdline" confirm ; then
-	touch /var/run/confirm
-fi
-
-# Let rhgb know that we're leaving rc.sysinit
-if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
-    /usr/bin/rhgb-client --sysinit
-fi
-
-- 
cgit v1.2.1