diff options
Diffstat (limited to 'sysconfig/network-scripts')
| -rwxr-xr-x | sysconfig/network-scripts/ifdown-eth | 4 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifdown-sit | 2 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifdown-tunnel | 2 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup | 8 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-aliases | 18 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-ctc | 2 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-eth | 16 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-ipv6 | 28 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-sit | 6 | ||||
| -rwxr-xr-x | sysconfig/network-scripts/ifup-tunnel | 4 |
10 files changed, 45 insertions, 45 deletions
diff --git a/sysconfig/network-scripts/ifdown-eth b/sysconfig/network-scripts/ifdown-eth index 530975c3..80b99544 100755 --- a/sysconfig/network-scripts/ifdown-eth +++ b/sysconfig/network-scripts/ifdown-eth @@ -39,13 +39,13 @@ if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then if [ -n "${NEWCONFIG}" ]; then eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG) else - echo $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." + net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." exit 1 fi if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then exec /sbin/ifdown ${NEWCONFIG} else - echo $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." + net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." exit 1 fi fi diff --git a/sysconfig/network-scripts/ifdown-sit b/sysconfig/network-scripts/ifdown-sit index 314b91f1..39e9c50f 100755 --- a/sysconfig/network-scripts/ifdown-sit +++ b/sysconfig/network-scripts/ifdown-sit @@ -37,7 +37,7 @@ REALDEVICE=${DEVICE%%:*} # Generic tunnel device sit0 is not supported here if [ "$DEVICE" = "sit0" ]; then - echo $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" + net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" exit 1 fi diff --git a/sysconfig/network-scripts/ifdown-tunnel b/sysconfig/network-scripts/ifdown-tunnel index a1f643c7..2853a0a8 100755 --- a/sysconfig/network-scripts/ifdown-tunnel +++ b/sysconfig/network-scripts/ifdown-tunnel @@ -33,7 +33,7 @@ source_config # Generic tunnel devices are not supported here if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 ]; then - echo $"Device '$DEVICE' isn't supported as a valid GRE device name." + net_log $"Device '$DEVICE' isn't supported as a valid GRE device name." exit 1 fi diff --git a/sysconfig/network-scripts/ifup b/sysconfig/network-scripts/ifup index 0089f3e9..f2980b39 100755 --- a/sysconfig/network-scripts/ifup +++ b/sysconfig/network-scripts/ifup @@ -83,21 +83,21 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ]; then VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//') # PHYSDEV should be set in ifcfg-vlan* file if test -z "$PHYSDEV"; then - echo $"PHYSDEV should be set for device ${DEVICE}" + net_log $"PHYSDEV should be set for device ${DEVICE}" exit 1 fi fi if [ -n "$VID" ]; then if [ ! -d /proc/net/vlan ]; then if ! modprobe 8021q >/dev/null 2>&1 ; then - echo $"No 802.1Q VLAN support available in kernel for device ${DEVICE}" + net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}" exit 1 fi fi is_available ${PHYSDEV} || { if [ "$?" = "1" ] ; then - echo $"$alias device ${DEVICE} does not seem to be present, delaying initialization." + net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." exit 1 else exit 0 @@ -121,7 +121,7 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ]; then ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || { (/usr/bin/logger -p daemon.info -t ifup \ $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &)& - echo $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" + net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" exit 1 } fi diff --git a/sysconfig/network-scripts/ifup-aliases b/sysconfig/network-scripts/ifup-aliases index 1312eede..6fa71921 100755 --- a/sysconfig/network-scripts/ifup-aliases +++ b/sysconfig/network-scripts/ifup-aliases @@ -125,7 +125,7 @@ eval ` ( # read defaults from the parent config file [ -f $PARENTCONFIG ] || { - echo $"Missing config file $PARENTCONFIG." >&2 + net_log $"Missing config file $PARENTCONFIG." exit 1 } eval ` ( @@ -169,7 +169,7 @@ function new_interface () MATCH='^[0-9A-Za-z_]*$' if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then - echo $"error in $FILE: invalid alias number" >&2 + net_log $"error in $FILE: invalid alias number" return 1 fi @@ -179,17 +179,17 @@ function new_interface () "; if [ -n "$ipseen" ]; then - echo $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" >&2 + net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" return 1 fi if [ -n "$devseen" ]; then - echo $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" >&2 + net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" return 1 fi if [ -z "$DEVICE" -o -z "$IPADDR" ]; then - echo $"error in $FILE: didn't specify device or ipaddr" >&2 + net_log $"error in $FILE: didn't specify device or ipaddr" return 1 fi @@ -256,7 +256,7 @@ function new_interface () setup_this=yes fi if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then - echo $"error in ifcfg-${parent_device}: files" >&2 + net_log $"error in ifcfg-${parent_device}: files" return 1 fi eval " rdev_${DEVNUM}_mark=\$newmark "; @@ -267,7 +267,7 @@ function new_interface () if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then eval " mark_remove=\$rdev_${rdevip}_mark "; if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then - echo $"error in ifcfg-${parent_device}: files" >&2 + net_log $"error in ifcfg-${parent_device}: files" return 1 fi if [ "$mark_remove" != "remove" ]; then @@ -337,11 +337,11 @@ for FILE in ifcfg-${parent_device}-range* ; do ipaddr_endnum=${IPADDR_END##*.} if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then - echo $"error in $FILE: IPADDR_START and IPADDR_END don't agree" >&2; continue + net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree"; continue fi if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then - echo $"error in $FILE: IPADDR_START greater than IPADDR_END" >&2; continue + net_log $"error in $FILE: IPADDR_START greater than IPADDR_END"; continue fi ipaddr_num=$ipaddr_startnum diff --git a/sysconfig/network-scripts/ifup-ctc b/sysconfig/network-scripts/ifup-ctc index 514c102b..e268d7cc 100755 --- a/sysconfig/network-scripts/ifup-ctc +++ b/sysconfig/network-scripts/ifup-ctc @@ -33,7 +33,7 @@ timeout=0 while ! ping -w 30 -c 1 ${GATEWAY} &>/dev/null; do timeout=$(($timeout + 1)) if [ $timeout = 20 ]; then - echo $"ERROR: ${DEVICE} did not come up!" + net_log $"ERROR: ${DEVICE} did not come up!" break fi done diff --git a/sysconfig/network-scripts/ifup-eth b/sysconfig/network-scripts/ifup-eth index 4d7b8aea..b81234d2 100755 --- a/sysconfig/network-scripts/ifup-eth +++ b/sysconfig/network-scripts/ifup-eth @@ -40,7 +40,7 @@ is_available ${REALDEVICE} if [ -n "${HWADDR}" ]; then FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then - echo $"Device ${DEVICE} has different MAC address than expected, ignoring." + net_log $"Device ${DEVICE} has different MAC address than expected, ignoring." exit 1 fi fi @@ -48,7 +48,7 @@ fi # If the device is a bridge, create it with brctl, if available. if [ "${TYPE}" = "Bridge" ]; then if [ ! -x /usr/sbin/brctl ]; then - echo $"Bridge support not available: brctl not found" + net_log $"Bridge support not available: brctl not found" exit 1 fi if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then @@ -61,7 +61,7 @@ fi # If the device is a tap device, create it with tunctl, if available. if [ "${TYPE}" = "Tap" ]; then if [ ! -x /usr/sbin/tunctl ]; then - echo $"Tap support not available: tunctl not found" + net_log $"Tap support not available: tunctl not found" exit 1 fi [ -n "${OWNER}" ] && OWNER="-u ${OWNER}" @@ -71,9 +71,9 @@ fi # now check the real state is_available ${REALDEVICE} || { if [ -n "$alias" ]; then - echo $"$alias device ${DEVICE} does not seem to be present, delaying initialization." + net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." else - echo $"Device ${DEVICE} does not seem to be present, delaying initialization." + net_log $"Device ${DEVICE} does not seem to be present, delaying initialization." fi exit 1 } @@ -219,7 +219,7 @@ else ip link set dev ${REALDEVICE} $(toggle_value arp $ARP) if ! ip link set dev ${REALDEVICE} up ; then - echo $"Failed to bring up ${DEVICE}." + net_log $"Failed to bring up ${DEVICE}." exit 1 fi @@ -250,13 +250,13 @@ else if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then [ "${REALDEVICE}" != "lo" ] && \ if ! /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]} ; then - echo $"Error, some other host already uses address ${ipaddr[$idx]}." + net_log $"Error, some other host already uses address ${ipaddr[$idx]}." exit 1 fi if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \ brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then - echo $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." + net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." fi fi diff --git a/sysconfig/network-scripts/ifup-ipv6 b/sysconfig/network-scripts/ifup-ipv6 index 93a55d6e..478682fb 100755 --- a/sysconfig/network-scripts/ifup-ipv6 +++ b/sysconfig/network-scripts/ifup-ipv6 @@ -97,8 +97,8 @@ if [ "$IPV6FORWARDING" = "yes" ]; then # Check, if global IPv6 forwarding was already set by global script if [ $ipv6_global_forwarding_current -ne 1 ]; then - echo $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel" - echo $"Please restart network with '/sbin/service network restart'" + net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel" + net_log $"Please restart network with '/sbin/service network restart'" fi ipv6_local_forwarding=1 @@ -114,8 +114,8 @@ else # Check, if global IPv6 forwarding was already set by global script if [ $ipv6_global_forwarding_current -ne 0 ]; then - echo $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel" - echo $"Please restart network with '/sbin/service network restart'" + net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel" + net_log $"Please restart network with '/sbin/service network restart'" fi ipv6_local_forwarding=0 @@ -144,7 +144,7 @@ fi if [ "$IPV6_PRIVACY" = "rfc3041" ]; then /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1 if [ $? -ne 0 ]; then - echo $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel" + net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel" fi fi @@ -168,7 +168,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then ipv6_test_device_status tun6to4 if [ $? = 0 ]; then # device is already up - echo $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first" + net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first" exit 1 fi @@ -195,7 +195,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then if [ -n "$ipv4addr" ]; then if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then - echo $"Given IPv4 address '$ipv4addr' is not globally usable" + net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info valid6to4config="no" fi if [ -z "$IPV6TO4_RELAY" ]; then @@ -208,7 +208,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then valid6to4config="no" fi else - echo $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" + net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info valid6to4config="no" fi @@ -223,7 +223,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then if [ -n "$IPV6TO4_MTU" ]; then if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then - echo $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" + net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning else tunnelmtu=$IPV6TO4_MTU fi @@ -237,7 +237,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then # Add default route, if device matches if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then if [ -n "$IPV6_DEFAULTGW" ]; then - echo $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" + net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning fi ipv6_set_default_route $ipv6to4_relay tun6to4 fi @@ -273,7 +273,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning if [ $ipv6_global_forwarding_current -ne 1 ]; then - echo $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" + net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning fi if [ -n "$IPV6TO4_ROUTING" ]; then @@ -286,17 +286,17 @@ if [ "$IPV6TO4INIT" = "yes" ]; then ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf} done else - echo $"Error occurred while calculating the IPv6to4 prefix" + net_log $"Error occurred while calculating the IPv6to4 prefix" fi else - echo $"radvd control enabled, but config is not complete" + net_log $"radvd control enabled, but config is not complete" fi # Control running radvd ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE fi else - echo $"6to4 configuration is not valid" + net_log $"6to4 configuration is not valid" exit 1 fi fi diff --git a/sysconfig/network-scripts/ifup-sit b/sysconfig/network-scripts/ifup-sit index 6d1a8c79..498305b7 100755 --- a/sysconfig/network-scripts/ifup-sit +++ b/sysconfig/network-scripts/ifup-sit @@ -55,12 +55,12 @@ ipv6_test || exit 1 # Generic tunnel device sit0 is not supported here if [ "$DEVICE" = "sit0" ]; then - echo $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" + net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" exit 1 fi if [ -z "$IPV6TUNNELIPV4" ]; then - echo $"Missing remote IPv4 address of tunnel, configuration is not valid" + net_log $"Missing remote IPv4 address of tunnel, configuration is not valid" exit 1 fi @@ -68,7 +68,7 @@ fi ipv6_test_device_status $DEVICE if [ $? = 0 ]; then # device is already up - echo $"Device '$DEVICE' is already up, please shutdown first" + net_log $"Device '$DEVICE' is already up, please shutdown first" exit 1 fi diff --git a/sysconfig/network-scripts/ifup-tunnel b/sysconfig/network-scripts/ifup-tunnel index 8fd631e5..c14e0658 100755 --- a/sysconfig/network-scripts/ifup-tunnel +++ b/sysconfig/network-scripts/ifup-tunnel @@ -46,14 +46,14 @@ case "$TYPE" in /sbin/modprobe ipip ;; *) - echo $"Invalid tunnel type $TYPE" + net_log $"Invalid tunnel type $TYPE" exit 1 ;; esac # Generic tunnel devices are not supported here if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 ]; then - echo $"Device '$DEVICE' isn't supported as a valid GRE device name." + net_log $"Device '$DEVICE' isn't supported as a valid GRE device name." exit 1 fi |