diff options
Diffstat (limited to 'rc.d/rc.sysinit')
| -rwxr-xr-x | rc.d/rc.sysinit | 1191 |
1 files changed, 0 insertions, 1191 deletions
diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit deleted file mode 100755 index 46d04fe8..00000000 --- a/rc.d/rc.sysinit +++ /dev/null @@ -1,1191 +0,0 @@ -#!/bin/bash -# -# /etc/rc.d/rc.sysinit - run once at boot time -# -# Taken in part from Miquel van Smoorenburg's bcheckrc. -# - -HOSTNAME=$(/bin/hostname) - -. /etc/init.d/functions - -set -m - -if [ -f /etc/sysconfig/network ]; then - . /etc/sysconfig/network -fi - -# Read in config data. -if [ -f /etc/sysconfig/system ]; then - . /etc/sysconfig/system -fi - -if [ -r /etc/hostname ]; then - HOSTNAME=$(cat /etc/hostname) -fi - -if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then - HOSTNAME=localhost -fi - -if [ ! -e /proc/mounts ]; then - mount -n -t proc /proc /proc - mount -n -t sysfs /sys /sys >/dev/null 2>&1 -fi - -PLYMOUTH= -[ -x /bin/plymouth ] && PLYMOUTH=yes - - -# Only read this once. -cmdline=$(cat /proc/cmdline) - -for t in $cmdline; do - case $t in - -s|single|S|s) REQUESTED_RUNLEVEL="S" ;; - [1-9]) REQUESTED_RUNLEVEL="$t" ;; - esac -done -[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab) -[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL="3" - -# killing splash when using single-user mode -if [ "$REQUESTED_RUNLEVEL" == "S" ]; then - [ -n "$PLYMOUTH" ] && /bin/plymouth quit 2>/dev/null -fi - -uname_r=`uname -r` - -# Read in config data. -if [ -f /etc/sysconfig/speedboot ]; then - . /etc/sysconfig/speedboot -fi - -if strstr "$cmdline" speedboot= ; then - for arg in $cmdline ; do - if [ "${arg##speedboot=}" != "${arg}" ]; then - SPEEDBOOT=${arg##speedboot=} - fi - done -fi - -if [ "$REQUESTED_RUNLEVEL" != 5 -o -f /etc/rc.d/rc5.d/S*network-auth -o -f /etc/crypttab ]; then - SPEEDBOOT=no -fi - -# disable speedboot if more than one profile is found (and not selected in cmdline) -if echo /etc/netprofile/profiles/* | grep -q ' ' ; then - if ! strstr "$cmdline" PROFILE= ; then - SPEEDBOOT=no - fi -fi - -if strstr "$cmdline" failsafe ; then - SPEEDBOOT=no -fi - -# Check to see if systemd is used as the init system and disable speedboot as it -# generally messes things up (manifests itself as user permission problems, -# especially with autologins). -if [ "$SPEEDBOOT" != "no" ]; then - if /bin/mountpoint -q /sys/fs/cgroup/systemd; then - SPEEDBOOT=no - fi -fi - -# Check if a possible DKMS display driver is queued to be built on this boot -# or an interfering driver was loaded by initrd. -if [ "$SPEEDBOOT" != "no" ] && [ -x /sbin/display_driver_helper ] && ! /sbin/display_driver_helper --check-speedboot; then - SPEEDBOOT=no -fi - -if [ "$SPEEDBOOT" = "probe" ]; then - SPEEDBOOT_PROBE=yes -fi - -if [ "x$SPEEDBOOT" = "xauto" ]; then - STATUS=`grep -m 1 "$uname_r" /var/lib/speedboot/status 2>/dev/null` - case "$STATUS" in - *first\ time*) SPEEDBOOT=yes ;; - *FAILED*) SPEEDBOOT=no ;; - *OK*) SPEEDBOOT=yes ;; - *STANDARD\ BOOT*) SPEEDBOOT=yes ;; - *) SPEEDBOOT=no ;; - esac -fi - -if [ "$SPEEDBOOT" = "yes" ]; then - export SPEEDBOOT - PROMPT=no -else - unset SPEEDBOOT -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -if [ ! -d /proc/bus/usb ]; then - modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb -else - mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb -fi -fi #SPEEDBOOT - -if [ -f /.readahead_collect -a -r /etc/sysconfig/readahead ]; then - . /etc/sysconfig/readahead - if [ "x$READAHEAD_COLLECT" == "xyes" -a ! -f /forcefsck -a -x /sbin/readahead-collector ]; then - /sbin/readahead-collector - fi -elif [ -x /sbin/readahead_early ]; then - /sbin/readahead_early > /dev/null 2>&1 -fi - -if [ -x /etc/rc.early.local ]; then - . /etc/rc.early.local -fi - -# Unmount the initrd, if necessary -# (pixel) do not unmount if /initrd/loopfs is mounted (happens for root loopback) -# (bluca) handle udev /dev tmpfs here since kernel will happily umount /dev after initrd end -# (blino) do it before the udev service is started so that it uses the /dev tmpfs from initrd -if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then - if LC_ALL=C grep -q /initrd/dev /proc/mounts; then - mount --move /initrd/dev /dev - fi - action "Unmounting initrd: " umount -l /initrd - /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1 -fi - -if [ "x$SPEEDBOOT" = "xyes" ]; then - /sbin/start_udev - udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x0c03*" - udevadm trigger --action=add --subsystem-match=block - udevadm settle & - UDEV_DISK_PID=$! - udevadm trigger --action=add --subsystem-match=mem --subsystem-match=input --subsystem-match=tty --subsystem-match=acpi --subsystem-match=rtc --subsystem-match=hid - udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x060000*" - udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x03*" - udevadm settle & - UDEV_PID=$! -fi - -PLYMOUTH= -[ -x /bin/plymouth ] && PLYMOUTH=yes - -# Check SELinux status -SELINUX_STATE= -if [ -e "/sys/fs/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then - if [ -r "/sys/fs/selinux/enforce" ] ; then - SELINUX_STATE=$(cat "/sys/fs/selinux/enforce") - else - # assume enforcing if you can't read it - SELINUX_STATE=1 - fi -fi - -if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then - /sbin/restorecon -R /dev 2>/dev/null -fi - -disable_selinux() { - gprintf "*** Warning -- SELinux is active\n" - gprintf "*** Disabling security enforcement for system recovery.\n" - gprintf "*** Run 'setenforce 1' to reenable.\n" - echo "0" > "/sys/fs/selinux/enforce" -} - -relabel_selinux() { - # if /sbin/init is not labeled correctly this process is running in the - # wrong context, so a reboot will be required after relabel - AUTORELABEL= - . /etc/selinux/config - echo "0" > /sys/fs/selinux/enforce - [ -n "$PLYMOUTH" ] && plymouth --hide-splash - - if [ "$AUTORELABEL" = "0" ]; then - echo - gprintf "*** Warning -- SELinux %s policy relabel is required. \n" ${SELINUXTYPE} - gprintf "*** /etc/selinux/config indicates you want to manually fix labeling\n" - gprintf "*** problems. Dropping you to a shell; the system will reboot\n" - gprintf "*** when you leave the shell.\n" - sulogin - - else - echo - gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE} - gprintf "*** Relabeling could take a very long time, depending on file\n" - gprintf "*** system size and speed of hard drives.\n" - - /sbin/fixfiles -F restore > /dev/null 2>&1 - fi - rm -f /.autorelabel - gprintf "Unmounting file systems\n" - umount -a - mount -n -o remount,ro / - gprintf "Automatic reboot in progress.\n" - reboot -f -} - -# Print a text banner. -# C-like escape sequences don't work as 2nd and up parameters of gprintf, -# so real escap chars were written -PRODUCT=`sed "s/.*release \([0-9.]*\).*/\1/g" /etc/release 2> /dev/null` -SYSTEM=${SYSTEM="Mageia"} - -if [ -r /etc/sysconfig/oem ]; then - . /etc/sysconfig/oem -fi - -if [ "$BOOTUP" != "serial" ]; then - gprintf "\t\t\tWelcome to %s" "`echo -en '\\033[1;36m'`$SYSTEM`echo -en '\\033[0;39m'` $PRODUCT" -else - gprintf "\t\t\tWelcome to %s" "$SYSTEM $PRODUCT" -fi -echo -en "\r" -echo -if [ "$PROMPT" != "no" ]; then - gprintf "\t\tPress 'I' to enter interactive startup." - echo -fi - -# Fix console loglevel -if [ -n "$LOGLEVEL" ]; then - /bin/dmesg -n $LOGLEVEL -fi - -initsplash 5 -rc_splash start 1 - -# Initialize hardware -if [ -f /proc/sys/kernel/modprobe ]; then - if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then - sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1 - else - # We used to set this to NULL, but that causes 'failed to exec' messages" - sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1 - fi -fi - -touch /dev/.in_sysinit >/dev/null 2>&1 - -# Set default affinity -if [ -x /bin/taskset ]; then - if strstr "$cmdline" default_affinity= ; then - for arg in $cmdline ; do - if [ "${arg##default_affinity=}" != "${arg}" ]; then - /bin/taskset -p ${arg##default_affinity=} 1 - fi - done - fi -fi - -nashpid=$(pidof nash 2>/dev/null) -[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1 -unset nashpid -if [ "x$SPEEDBOOT" != "xyes" ]; then -action $"Starting udev: " /sbin/udevd --daemon -/sbin/udevadm trigger --type=subsystems --action=add -/sbin/udevadm trigger --type=devices --action=add -/sbin/udevadm settle -fi #SPEEDBOOT - -# Load other user-defined modules -for file in /etc/sysconfig/modules/*.modules ; do - [ -x $file ] && $file -done - -# Load modules (for backward compatibility with VARs) -if [ -f /etc/rc.modules ]; then - if [ "x$SPEEDBOOT" != "xyes" ]; then - /etc/rc.modules - else - ionice -c 3 /etc/rc.modules & - MODULES_PID=$! - fi -fi - -mount -n -t devpts -o mode=620 none /dev/pts >/dev/null 2>&1 -[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1 - -mount -n -t tmpfs none /dev/shm >/dev/null 2>&1 - -# Configure kernel parameters -update_boot_stage RCkernelparam -apply_sysctl - -if [ "x$SPEEDBOOT" != "xyes" ]; then - -# If brltty exist start it (after udev so that vcsa device nodes are created) -[ -x /bin/brltty -a "$BRLTTY" != "no" ] && action "Starting braille terminal" /bin/brltty && SPEEDBOOT="DISABLED reason: braille" - -fi #SPEEDBOOT - -# Set the hostname. -update_boot_stage RChostname -action "Setting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME} - -# Set the NIS domain name -if [ -n "$NISDOMAIN" ]; then - action "Setting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -# Now that we load only one scsi_hostadapter in the initrd, we -# need to load the others here -modprobe scsi_hostadapter >/dev/null 2>&1 -# Now that we use modular IDE, we need to do the same for IDE controllers -modprobe ide-controller >/dev/null 2>&1 -# Sync waiting for storage. -{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1 - -# Start any MD RAID arrays that haven't been started yet -if [ -f /etc/mdadm.conf -a -x /sbin/mdadm ]; then - MDADM_RETURN=`/sbin/mdadm -As --auto=yes --run 2>&1` - RETVAL=$? - if [ $RETVAL -gt 0 ]; then - echo $MDADM_RETURN | grep -q 'No arrays found in config file' - RETVAL=$? - # only enable speedboot if no array is configured - if [ $RETVAL -gt 0 ]; then - SPEEDBOOT="DISABLED: reason:MD RAID" - fi - else # MD RAID arrays detected, better to disable speedboot - SPEEDBOOT="DISABLED: reason:MD RAID" - - fi -fi -fi #SPEEDBOOT - -# Device mapper & related initialization -if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then - modprobe dm-mod >/dev/null 2>&1 -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -if [ -f /etc/crypttab ]; then - init_crypto 0 -fi - -if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \ - [ -x /sbin/multipath ]; then - modprobe dm-multipath > /dev/null 2>&1 - /sbin/multipath -v 0 - if [ -x /sbin/kpartx ]; then - /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null - fi -fi - -if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then - modprobe dm-mirror >/dev/null 2>&1 - dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i) - if [ "$dmraidsets" != "no raid disks" -a "$dmraidsets" != "no block devices found" ]; then - for dmname in $dmraidsets; do - if [[ "$dmname" =~ '^isw_.*' ]] && \ - ! strstr "$cmdline" noiswmd; then - continue - fi - - /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1 - /sbin/kpartx -a -p p "/dev/mapper/$dmname" - SPEEDBOOT="DISABLED reason:dmraid" - done - fi - fi -fi #SPEEDBOOT - -# Start any MD RAID arrays that haven't been started yet -[ -r /proc/mdstat ] && [ -r /dev/md/md-device-map ] && /sbin/mdadm -IRs - -if [ -x /sbin/lvm ]; then - action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --ignorelockingfailure -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -if [ -f /etc/crypttab ]; then - init_crypto 0 -fi -fi #SPEEDBOOT - -if strstr "$cmdline" fastboot || [ -f /fastboot ]; then - fastboot=yes -fi - -if [ -f /fsckoptions ]; then - fsckoptions=$(cat /fsckoptions) -fi - -# (blino) always source autofsck settings, for AUTOFSCK_CRYPTO_TIMEOUT (#16029) -[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck - -if strstr "$cmdline" forcefsck || [ -f /forcefsck ]; then - fsckoptions="-f $fsckoptions" -elif [ -f /.autofsck ]; then - if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then - AUTOFSCK_OPT="$AUTOFSCK_OPT -f" - fi - if [ -n "$AUTOFSCK_SINGLEUSER" ]; then - [ -n "$PLYMOUTH" ] && plymouth --hide-splash - rc_splash verbose - echo - gprintf "*** Warning -- the system did not shut down cleanly. \n" - gprintf "*** Dropping you to a shell; the system will continue\n" - gprintf "*** when you leave the shell.\n" - [ -n "$SELINUX_STATE" ] && echo "0" > /sys/fs/selinux/enforce - sulogin - [ -n "$SELINUX_STATE" ] && echo "1" > /sys/fs/selinux/enforce - [ -n "$PLYMOUTH" ] && plymouth --show-splash - fi - fsckoptions="$AUTOFSCK_OPT $fsckoptions" -fi - -if [ "$BOOTUP" = "color" ]; then - fsckoptions="-C $fsckoptions" -else - fsckoptions="-V $fsckoptions" -fi - -READONLY= -if [ -f /etc/sysconfig/readonly-root ]; then - . /etc/sysconfig/readonly-root -fi -if strstr "$cmdline" readonlyroot ; then - READONLY=yes - [ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable - [ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state -fi -if strstr "$cmdline" noreadonlyroot ; then - READONLY=no -fi - -if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then - - mount_empty() { - if [ -e "$1" ]; then - echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null - mount -n --bind "$RW_MOUNT$1" "$1" - fi - } - - mount_dirs() { - if [ -e "$1" ]; then - mkdir -p "$RW_MOUNT$1" - find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null - mount -n --bind "$RW_MOUNT$1" "$1" - fi - } - - mount_files() { - if [ -e "$1" ]; then - cp -a --parents "$1" "$RW_MOUNT" - mount -n --bind "$RW_MOUNT$1" "$1" - fi - } - - # Common mount options for scratch space regardless of - # type of backing store - mountopts= - - # Scan partitions for local scratch storage - rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device) - - # First try to mount scratch storage from /etc/fstab, then any - # partition with the proper label. If either succeeds, be sure - # to wipe the scratch storage clean. If both fail, then mount - # scratch storage via tmpfs. - if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then - rm -rf "$RW_MOUNT" > /dev/null 2>&1 - elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then - rm -rf "$RW_MOUNT" > /dev/null 2>&1 - else - mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT" - fi - - for file in /etc/rwtab /etc/rwtab.d/* /dev/.initramfs/rwtab ; do - is_ignored_file "$file" && continue - [ -f $file ] && cat $file | while read type path ; do - case "$type" in - empty) - mount_empty $path - ;; - files) - mount_files $path - ;; - dirs) - mount_dirs $path - ;; - *) - ;; - esac - [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path" - done - done - - # Use any state passed by initramfs - [ -d /dev/.initramfs/state ] && cp -a /dev/.initramfs/state/* $RW_MOUNT - - # In theory there should be no more than one network interface active - # this early in the boot process -- the one we're booting from. - # Use the network address to set the hostname of the client. This - # must be done even if we have local storage. - ipaddr= - if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then - ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }') - for ip in $ipaddr ; do - HOSTNAME= - eval $(ipcalc -h $ip 2>/dev/null) - [ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; } - done - fi - - # Clients with read-only root filesystems may be provided with a - # place where they can place minimal amounts of persistent - # state. SSH keys or puppet certificates for example. - # - # Ideally we'll use puppet to manage the state directory and to - # create the bind mounts. However, until that's all ready this - # is sufficient to build a working system. - - # First try to mount persistent data from /etc/fstab, then any - # partition with the proper label, then fallback to NFS - state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device) - if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then - /bin/true - elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1; then - /bin/true - elif [ ! -z "$CLIENTSTATE" ]; then - # No local storage was found. Make a final attempt to find - # state on an NFS server. - - mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock - fi - - if [ -w "$STATE_MOUNT" ]; then - - mount_state() { - if [ -e "$1" ]; then - [ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT" - mount -n --bind "$STATE_MOUNT$1" "$1" - fi - } - - for file in /etc/statetab /etc/statetab.d/* ; do - is_ignored_file "$file" && continue - [ ! -f "$file" ] && continue - - if [ -f "$STATE_MOUNT/$file" ] ; then - mount -n --bind "$STATE_MOUNT/$file" "$file" - fi - - for path in $(grep -v "^#" "$file" 2>/dev/null); do - mount_state "$path" - [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path" - done - done - - if [ -f "$STATE_MOUNT/files" ] ; then - for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do - mount_state "$path" - [ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path" - done - fi - fi -fi - -if [[ " $fsckoptions" != *" -y"* ]]; then - fsckoptions="-a $fsckoptions" -fi - -_RUN_QUOTACHECK=0 -if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then - _RUN_QUOTACHECK=1 -fi -Fsck() -{ - fsck $* - rc=$? - - if [ "$rc" -eq "0" ]; then - echo_success - echo - elif [ "$rc" -eq "1" ]; then - echo_passed - echo - _RUN_QUOTACHECK=1 - elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then - gprintf "Unmounting file systems\n" - umount -a - mount -n -o remount,ro / - gprintf "Automatic reboot in progress.\n" - reboot -f - elif [ $((rc & 4)) = 4 ]; then - # Return code is a or between return codes for the filesystems - # 4 means that a filesystem remains corrupted - rc_splash verbose - echo_failure - echo - echo - gprintf "*** An error occurred during the file system check.\n" - gprintf "*** Dropping you to a shell; the system will reboot\n" - gprintf "*** when you leave the shell.\n" - - str=`gprintf "(Repair filesystem)"` - PS1="$str \# # "; export PS1 - [ "$SELINUX_STATE" = "1" ] && disable_selinux - sulogin - - gprintf "Unmounting file systems\n" - umount -a - mount -n -o remount,ro / - gprintf "Automatic reboot in progress.\n" - reboot -f - else - echo_failure - echo - gprintf "*** A non fatal error occurred during the file system check.\n" - fi -} - -remount_needed() { - local state oldifs - [ "$READONLY" = "yes" ] && return 1 - state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts) - oldifs=$IFS - IFS="," - for opt in $state ; do - if [ "$opt" = "rw" ]; then - IFS=$oldifs - return 1 - fi - done - IFS=$oldifs - return 0 -} - -if [ "x$SPEEDBOOT" = "xyes" ]; then - wait $UDEV_DISK_PID -fi -# do not check / if already rw (for example with unionfs) -if [ -z "$fastboot" -a "$READONLY" != "yes" ] && remount_needed; then - gprintf "Checking root filesystem\n" - Fsck -T -a $fsckoptions / -fi -_RUN_QUOTACHECK=0 - -# Remount the root filesystem read-write. -update_boot_stage RCmountfs -if remount_needed ; then - action "Remounting root filesystem in read-write mode: " mount -n -o remount,rw / -fi - -# wait for usb storage scanning processes to finish -if ! strstr "$cmdline" nousb; then - LC_ALL=C grep '08' /sys/bus/usb/devices/*/bInterfaceClass >/dev/null 2>&1 - RETVAL=$? - if [ $RETVAL -eq 0 ]; then - countdown=20 - until [ -d /sys/module/usb_storage -o $countdown -eq 0 ]; do - usleep 100000; let countdown=$countdown-1; - done - while ps -eocomm | grep -q usb-stor-scan; do - sleep 1; - done - fi -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -# Clean up SELinux labels -if [ -n "$SELINUX_STATE" ]; then - restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1 - SPEEDBOOT="DISABLED reason: SELinux" -fi - -[ -x /sbin/hibernate-cleanup.sh ] && /sbin/hibernate-cleanup.sh start - -# If relabeling, relabel mount points. -if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then - if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then - restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1 - fi -fi -fi - -if [ "$READONLY" != "yes" ] ; then - # Clear mtab - (> /etc/mtab) &> /dev/null - - # Remove stale backups - rm -f /etc/mtab~ /etc/mtab~~ - - # Enter mounted filesystems into /etc/mtab - mount -f / - mount -f /proc >/dev/null 2>&1 - mount -f /sys >/dev/null 2>&1 - mount -f /dev/pts >/dev/null 2>&1 - mount -f /dev/shm >/dev/null 2>&1 - mount -f /proc/bus/usb >/dev/null 2>&1 -fi -# (pixel) also added /initrd/loopfs for loopback root -mount -f /initrd/loopfs 2>/dev/null - -if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then - # check for arguments passed from kernel - if ! strstr "$cmdline" nopnp ; then - PNP=yes - fi - if [ -n "$PNP" ]; then - action "Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf - else - action "Skipping ISA PNP configuration at users request: " /bin/true - fi -fi - -# tweak isapnp settings if needed. -if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then - /sbin/sndconfig --mungepnp >/dev/null 2>&1 -fi - -# Check filesystems -# (pixel) do not check loopback files, will be done later (aren't available yet) -if [ -z "$fastboot" ]; then - gprintf "Checking filesystems\n" - Fsck -T -R -A -a -t noopts=loop $fsckoptions -fi - -# Mount all other filesystems (except for network bases filesystems and /proc, which is already -# mounted). Contrary to standard usage, -# filesystems are NOT unmounted in single user mode. -# (pixel) also do not mount loopback and encrypted filesystems -# will be done later -( -# export locales (needed by mount.ntfs-3g) -export LC_ALL -export LANG -# The 'no' applies to all listed filesystem types. See mount(8). -if [ "$READONLY" != "yes" ] ; then - action "Mounting local filesystems: " mount -a -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted -else - action "Mounting local filesystems: " mount -a -n -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted -fi -) - -if [ "x$SPEEDBOOT" != "xyes" ]; then -[[ -z $AUTOFSCK_CRYPTO_TIMEOUT ]] && AUTOFSCK_CRYPTO_TIMEOUT=15 - -#Mounting Encrypted filesystem -encrypted_swap= -if [[ ! -f /fastboot ]];then - encrypted= - while read -a entry;do - device=${entry[0]} - mountpoint=${entry[1]} - options=${entry[3]} - type=${entry[2]} - if [[ $options == *encryption=* || $options == *encrypted* ]];then - [[ $options == *noauto* ]] && continue - if [[ $type == *swap* ]];then - encrypted_swap="$encrypted_swap $device" - continue - fi - encrypted="$encrypted $mountpoint" - fi - done < /etc/fstab - if [[ -n $encrypted ]];then - modprobe cryptoloop - rc_splash verbose - echo "We have discovered Encrypted filesystems, do you want to mount them now ?" - MSG=`gprintf "Press Y within %%d seconds to mount your encrypted filesystems..."` - KEYS=`gprintf "yY"` - if /sbin/getkey -c $AUTOFSCK_CRYPTO_TIMEOUT -m "$MSG" "$KEYS"; then - echo -e '\n' - for i in ${encrypted};do - echo -n "${i} "; mount ${i} - done - else - echo -e '\n' - fi - fi -fi - -# (pixel) Check loopback filesystems -if [ ! -f /fastboot ]; then - modprobe loop - gprintf "Checking loopback filesystems" - Fsck -T -R -A -a -t opts=loop $fsckoptions -fi - -fi #SPEEDBOOT - -# Mount loopback -action "Mounting loopback filesystems: " mount -a -O loop - -# Update quotas if necessary -if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then - action "Checking local filesystem quotas: " /sbin/quotacheck -anug -fi - -if [ -x /sbin/quotaon ]; then - action "Turning on user and group quotas for local filesystems: " /sbin/quotaon -aug -fi - -if [ "x$SPEEDBOOT" != "xyes" ]; then -# Check to see if a full relabel is needed -if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then - if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then - relabel_selinux - fi -else - if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then - [ -f /.autorelabel ] || touch /.autorelabel - fi -fi -fi #SPEEDBOOT - -# Initialize pseudo-random number generator -if [ -f "/var/lib/random-seed" ]; then - cat /var/lib/random-seed > /dev/urandom -else - [ "$READONLY" != "yes" ] && touch /var/lib/random-seed -fi -if [ "$READONLY" != "yes" ]; then - chmod 600 /var/lib/random-seed - dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null -fi -if [ "x$SPEEDBOOT" != "xyes" ]; then -if [ -f /etc/crypttab ]; then - init_crypto 1 - SPEEDBOOT="DISABLED reason: crypto FS" -fi - -# Configure machine if necessary. -if [ -f /.unconfigured ]; then - - if [ -x /bin/plymouth ]; then - /bin/plymouth quit - fi - - if [ -x /usr/bin/system-config-keyboard ]; then - /usr/bin/system-config-keyboard - fi - if [ -x /usr/bin/passwd ]; then - /usr/bin/passwd root - fi - if [ -x /usr/sbin/system-config-network-tui ]; then - /usr/sbin/system-config-network-tui - fi - if [ -x /usr/sbin/timeconfig ]; then - /usr/sbin/timeconfig - fi - if [ -x /usr/sbin/authconfig-tui ]; then - /usr/sbin/authconfig-tui --nostart - fi - if [ -x /usr/sbin/ntsysv ]; then - /usr/sbin/ntsysv --level 35 - fi - - # Reread in network configuration data. - if [ -f /etc/sysconfig/network ]; then - . /etc/sysconfig/network - - # Reset the hostname. - action "Resetting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME} - - # Reset the NIS domain name. - if [ -n "$NISDOMAIN" ]; then - action "Resetting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN - fi - fi - - rm -f /.unconfigured -fi -fi - -# Clean out /. -rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \ - /poweroff /.suspended /etc/killpower &> /dev/null - -# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might... -_NEED_XFILES= -[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1 - -# Clean up /var. -rm -rf /var/lock/cvs/* /var/run/screen/* -find /var/lock /var/run ! -type d ! -path '/var/lock/TMP_1ST' -exec rm -f {} \; - -if [ "x$SPEEDBOOT" = "xyes" ]; then - wait $MODULES_PID - wait $UDEV_PID - /etc/rc.d/rc S & - RC_PID=$! -fi -{ -# Clean up utmp/wtmp -> /var/run/utmp -touch /var/log/wtmp /var/log/btmp -chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp -chmod 0664 /var/run/utmp /var/log/wtmp -chmod 0600 /var/log/btmp -if [ -n "$_NEED_XFILES" ]; then - > /var/run/utmpx - touch /var/log/wtmpx - chgrp utmp /var/run/utmpx /var/log/wtmpx - chmod 0664 /var/run/utmpx /var/log/wtmpx -fi -[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* /var/log/btmp >/dev/null 2>&1 - -# Clean up various /tmp bits -[ -n "$SELINUX_STATE" ] && restorecon /tmp -rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.s.PGSQL.* -rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \ - /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \ - /tmp/ssh-* /tmp/.fam_socket /tmp/.esd /tmp/.esd-* \ - /tmp/pulse-* /tmp/.sawfish-* /tmp/esrv* /tmp/kio* \ - /var/lib/gdm/core.* - -# Make ICE directory -mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1 -chown root:root /tmp/.ICE-unix -[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1 - -# Start up swapping. -update_boot_stage RCswap -action "Enabling /etc/fstab swaps: " swapon -a -e 2>/dev/null -if [ "$AUTOSWAP" = "yes" ]; then - curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done) - swappartitions=$(blkid -t TYPE=swap -o device) - if [ x"$swappartitions" != x ]; then - for partition in $swappartitions ; do - [ ! -e $partition ] && continue - majmin=$(get_numeric_dev dec $partition) - echo $curswap | grep -qw "$majmin" || action "Enabling local swap partitions: " swapon $partition - done - fi -fi - -# Set up binfmt_misc -/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1 - -# Boot time profiles. Yes, this should be somewhere else. -if strstr "$cmdline" netprofile= && [ -x /usr/sbin/system-config-network-cmd ]; then - for arg in $cmdline ; do - if [ "${arg##netprofile=}" != "${arg}" ]; then - /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=} - fi - done -fi - -( -# Now turn on swap in case we swap to files. -action "Enabling swap space: " swapon -a -e - -if [ "x$SPEEDBOOT" != "xyes" ]; then -# If a SCSI tape has been detected, load the st module unconditionally -# since many SCSI tapes don't deal well with st being loaded and unloaded -if [ -n "$USEMODULES" -a -f /proc/scsi/scsi ] && LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then - LC_ALL=C fgrep -q ' 9 st' /proc/devices || modprobe st >/dev/null 2>&1 - SPEEDBOOT="DISABLED reason: SCSI tape" -fi -fi #SPEEDBOOT - -( -# Turn on harddisk optimization -# There is only one file /etc/sysconfig/harddisks for all disks -# after installing the hdparm-RPM. If you need different hdparm parameters -# for each of your disks, copy /etc/sysconfig/harddisks to -# /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it. -# Each disk which has no special parameters will use the defaults. -# Each non-disk which has no special parameters will be ignored. -# - -disk[0]=s; -disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd; -disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh; -disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl; -disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp; -disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt; -disk[21]=sda; disk[22]=sdb; disk[23]=sdc; disk[24]=sdd; -disk[25]=sde; disk[26]=sdf; disk[27]=sdg; disk[28]=sdh; -disk[29]=sr0; disk[30]=sr1; disk[31]=sr2; disk[32]=sr3; -disk[33]=scd0; disk[34]=scd1; disk[35]=scd2; disk[36]=scd3; -disk[37]=sg0; disk[38]=sg1; disk[39]=sg2; disk[40]=sg3; - - -# Skip hard disks optimization if software RAID arrays are currently -# resyncing and disks heavily active, because hdparm might hang and -# lock system startup in such situation - -if [ ! -f /proc/mdstat ] || ! /bin/egrep -qi "re(cover|sync)|syncing" /proc/mdstat; then - if [ -x /sbin/hdparm ]; then - for device in {0..40}; do - unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS - if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then - . /etc/sysconfig/harddisk${disk[$device]} - HDFLAGS[$device]= - if [ -n "$MULTIPLE_IO" ]; then - HDFLAGS[$device]="-q -m$MULTIPLE_IO" - fi - if [ -n "$USE_DMA" ]; then - HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA" - fi - if [ -n "$EIDE_32BIT" ]; then - HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT" - fi - if [ -n "$LOOKAHEAD" ]; then - HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD" - fi - if [ -n "$EXTRA_PARAMS" ]; then - HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS" - fi - else - HDFLAGS[$device]="${HDFLAGS[0]}" - fi - if [ -e "/proc/ide/${disk[$device]}/media" -o -e "/sys/block/${disk[$device]}/device/vendor" ]; then - if [ -e "/proc/ide/${disk[$device]}/media" ]; then - hdmedia=`cat /proc/ide/${disk[$device]}/media` - else - hdmedia=`cat /sys/block/${disk[$device]}/device/vendor` - fi - if [ "$hdmedia" = "disk" -o "$vendor" = "ATA" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then - if [ -n "${HDFLAGS[$device]}" ]; then - sleep 2 - action "Setting hard drive parameters for %s: " ${disk[$device]} /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]} - fi - fi - fi - done - fi -else - action "RAID Arrays are resyncing. Skipping hard drive parameters section." /bin/true -fi -) & - - -# Adjust symlinks as necessary in /boot to keep system services from -# spewing messages about mismatched System maps and so on. -if [ -L /boot/System.map -a -r /boot/System.map-$uname_r -a \ - ! /boot/System.map -ef /boot/System.map-$uname_r ] ; then - ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null -fi -if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then - ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null -fi - -# Adjust symlinks as necessary in /boot to have the default config -if [ -L /boot/config -a -r /boot/config-$uname_r ] ; then - ln -sf config-$uname_r /boot/config 2>/dev/null -fi -if [ ! -e /boot/config -a -r /boot/config-$uname_r ] ; then - ln -sf config-$uname_r /boot/config 2>/dev/null -fi - -# Now that we have all of our basic modules loaded and the kernel going, -# let's dump the syslog ring somewhere so we can find it later -[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old -dmesg -s 131072 > /var/log/dmesg -) & - -# create the crash indicator flag to warn on crashes, offer fsck with timeout -touch /.autofsck &> /dev/null - -if [ "$PROMPT" != no ]; then - while :; do - pid=$(/sbin/pidof getkey) - [ -n "$pid" -o -e /var/run/getkey_done ] && break - usleep 100000 - done - [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1 -fi -} & -if strstr "$cmdline" confirm ; then - touch /var/run/confirm -fi -if [ "x$SPEEDBOOT" != "xyes" ]; then -if [ "$PROMPT" != "no" ]; then - /sbin/getkey i && touch /var/run/confirm - touch /var/run/getkey_done -fi -wait -[ "$PROMPT" != no ] && rm -f /var/run/getkey_done -fi - -if strstr "$cmdline" failsafe; then - touch /var/run/failsafe -fi - -if [ -f /var/lock/TMP_1ST ];then - if [ -f /etc/init.d/mandrake_firstime ];then - /bin/sh /etc/init.d/mandrake_firstime - fi -fi - -if [ "x$SPEEDBOOT" = "xyes" ]; then - if [ ! -f /.readahead_collect -a -x /sbin/readahead_later ]; then - /sbin/readahead_later > /dev/null 2>&1 - fi - wait $RC_PID - countdown=10 - until [ -e /tmp/.X11-unix/X0 -o $countdown -eq 0 ]; do - sleep 1; let countdown=$countdown-1; - done - - - - /sbin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=block --subsystem-nomatch=mem --subsystem-nomatch=input --subsystem-nomatch=acpi --subsystem-nomatch=rtc --subsystem-nomatch=hid - /sbin/udevadm settle --timeout=5 > /dev/null 2>&1 - /sbin/udevadm control --env=STARTUP= - mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb - - # (anssi) at this point plymouth should have quit, reopen descriptors to - # ensure that the output of the rest of this script is seen if the user is - # not in X11 - exec 0<>/proc/self/fd/0 1<>/proc/self/fd/1 2<>/proc/self/fd/2 -fi - -if [ -f /etc/init.d/mandrake_everytime ]; then - /bin/sh /etc/init.d/mandrake_everytime -fi - -if [ "x$SPEEDBOOT_PROBE" = "xyes" ]; then - sed -i -e "/$uname_r .*/d" /var/lib/speedboot/status 2>/dev/null - unset SPEEDBOOT_PROBE -fi - -if [ "x$SPEEDBOOT" = "xyes" -a ! -e /tmp/.X11-unix/X0 ]; then - /etc/init.d/dm stop - grep -q "$uname_r" /var/lib/speedboot/status 2> /dev/null - RETVAL=$? - if [ $RETVAL -eq 0 ]; then - sed -i -e "s/^$uname_r FAILED (first time)/$uname_r FAILED/g" -e "/FAILED/!s/^$uname_r .*/$uname_r FAILED (first time)/g" /var/lib/speedboot/status - else - echo "$uname_r FAILED (first time)" >> /var/lib/speedboot/status - fi -fi - -# system configuration doesn't permit speedboot or speedboot failed, disable it -if strstr "$SPEEDBOOT" DISABLED ; then - grep -q $uname_r /var/lib/speedboot/status 2> /dev/null - RETVAL=$? - if [ $RETVAL -eq 0 ]; then - sed -i -e "s/^$uname_r .*/$uname_r $SPEEDBOOT/g" /var/lib/speedboot/status - else - echo "$uname_r $SPEEDBOOT" >> /var/lib/speedboot/status - fi -fi - -unset SPEEDBOOT - -# (pixel) a kind of profile for XF86Config -# if no XFree=XXX given on kernel command-line, restore XF86Config.standard -for i in XF86Config XF86Config-4; do - if [ -L "/etc/X11/$i" ]; then - XFree=`sed -n 's/.*XFree=\(\w*\).*/\1/p' /proc/cmdline` - [ -n "$XFree" ] || XFree=standard - [ -r "/etc/X11/$i.$XFree" ] && ln -sf "$i.$XFree" "/etc/X11/$i" - fi -done - -# Let rhgb know that we're leaving rc.sysinit -if [ -x /bin/plymouth ]; then - /bin/plymouth --sysinit -fi - -# remove this file at the very end, for speedboot -rm -f /dev/.in_sysinit - |