21 files changed, 0 insertions, 422 deletions
diff --git a/event.d/console b/event.d/console
deleted file mode 100644
index 732a3fa9..00000000
--- a/event.d/console
+++ /dev/null
@@ -1,16 +0,0 @@
-# console - getty
-#
-# This service maintains a getty on console from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty console
diff --git a/event.d/control-alt-delete b/event.d/control-alt-delete
deleted file mode 100644
index 35cb1305..00000000
--- a/event.d/control-alt-delete
+++ /dev/null
@@ -1,8 +0,0 @@
-# control-alt-delete - emergency keypress handling
-#
-# This task is run whenever the Control-Alt-Delete key combination is
-# pressed.  Usually used to shut down the machine.
-
-start on control-alt-delete
-
-exec /sbin/shutdown -r now "Control-Alt-Delete pressed"
diff --git a/event.d/plymouth-shutdown b/event.d/plymouth-shutdown
deleted file mode 100644
index d76dbd3f..00000000
--- a/event.d/plymouth-shutdown
+++ /dev/null
@@ -1,24 +0,0 @@
-# plymouth-shutdown - put up shutdown splash
-#
-# This service triggers plymouth to put up a splash
-# when leaving runlevel 5.
-
-start on stopped prefdm 
-
-console output
-script
-        set $(runlevel || true)
-        if [ "$2" != "0" ] && [ "$2" != "6" ]; then
-		exit 0
-        fi
-
-        /sbin/plymouthd --mode=shutdown || exit 1
-        /bin/plymouth --sysinit
-        /bin/plymouth --show-splash
-        if [ "$2" = "0" ]; then
-                /bin/plymouth message --text="Shutting down..."
-        elif [ "$2" = "6" ]; then
-                /bin/plymouth message --text="Restarting..."
-        fi
-end script
-
diff --git a/event.d/prefdm b/event.d/prefdm
deleted file mode 100644
index 7098bd76..00000000
--- a/event.d/prefdm
+++ /dev/null
@@ -1,12 +0,0 @@
-# prefdm - preferred display manager
-#
-# Starts gdm/xdm/etc by preference
-
-start on stopped rc5
-
-stop on runlevel [!5]
-
-console output
-respawn
-respawn limit 10 120
-exec /etc/X11/prefdm -nodaemon
diff --git a/event.d/quit-plymouth b/event.d/quit-plymouth
deleted file mode 100644
index 13ac3880..00000000
--- a/event.d/quit-plymouth
+++ /dev/null
@@ -1,15 +0,0 @@
-# quit-plymouth - script to stop boot splash
-#
-# This service triggers plymouth to quit when we reach the
-# end of the boot cycle. We start on 'stopping rcX' to make sure
-# this completes before the getty starts.
-# prefdm handles quit differently, though.
-
-start on runlevel S
-start on stopping rc2
-start on stopping rc3
-start on stopping rc4
-
-script
-	 /usr/bin/plymouth quit || :
-end script
diff --git a/event.d/rc0 b/event.d/rc0
deleted file mode 100644
index 11ce5a51..00000000
--- a/event.d/rc0
+++ /dev/null
@@ -1,25 +0,0 @@
-# rc0 - runlevel 0 compatibility
-#
-# This task runs the old sysv-rc runlevel 0 ("halt/poweroff") scripts with
-# the decision as to whether to halt or power off the system left up to the
-# script (and thus /etc/default/poweroff).
-
-start on runlevel 0
-
-stop on runlevel [!0]
-
-console output
-script
-	set $(runlevel || true)
-	if [ "$2" != "0" ] && [ "$2" != "6" ]; then
-	    set $(runlevel --set 0 || true)
-        fi
-
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 0
-end script
diff --git a/event.d/rc1 b/event.d/rc1
deleted file mode 100644
index 38397b31..00000000
--- a/event.d/rc1
+++ /dev/null
@@ -1,29 +0,0 @@
-# rc1 - runlevel 1 compatibility
-#
-# This task runs the old sysv-rc runlevel 1 ("single-user") scripts. 
-# /etc/rc.d/rc 1 will run the /etc/rc.d/rc1.d scripts.
-# telinit S will run whichever task has "start on runlevel S",
-# normally /etc/event.d/rcS-sulogin
-
-start on runlevel 1
-
-stop on runlevel [!1]
-
-console output
-script
-	set $(runlevel --set 1 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 1
-end script
-post-stop script
-	clear
-	TEXTDOMAIN=initscripts
-	. /etc/profile.d/lang.sh 2>/dev/null
-	echo $"Telling INIT to go to single user mode."
-	exec telinit S
-end script
diff --git a/event.d/rc2 b/event.d/rc2
deleted file mode 100644
index 6cc4d884..00000000
--- a/event.d/rc2
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc2 - runlevel 2 compatibility
-#
-# This task runs the old sysv-rc runlevel 2 ("multi-user") scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 2
-
-stop on runlevel [!2]
-
-console output
-script
-	set $(runlevel --set 2 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 2
-end script
diff --git a/event.d/rc3 b/event.d/rc3
deleted file mode 100644
index 47a4a639..00000000
--- a/event.d/rc3
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc3 - runlevel 3 compatibility
-#
-# This task runs the old sysv-rc runlevel 3 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 3
-
-stop on runlevel [!3]
-
-console output
-script
-	set $(runlevel --set 3 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 3
-end script
diff --git a/event.d/rc4 b/event.d/rc4
deleted file mode 100644
index 8e079f0e..00000000
--- a/event.d/rc4
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc4 - runlevel 4 compatibility
-#
-# This task runs the old sysv-rc runlevel 4 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 4
-
-stop on runlevel [!4]
-
-console output
-script
-	set $(runlevel --set 4 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 4
-end script
diff --git a/event.d/rc5 b/event.d/rc5
deleted file mode 100644
index 0ef6a400..00000000
--- a/event.d/rc5
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc5 - runlevel 5 compatibility
-#
-# This task runs the old sysv-rc runlevel 5 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 5
-
-stop on runlevel [!5]
-
-console output
-script
-	set $(runlevel --set 5 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 5
-end script
diff --git a/event.d/rc6 b/event.d/rc6
deleted file mode 100644
index f9df8b4a..00000000
--- a/event.d/rc6
+++ /dev/null
@@ -1,23 +0,0 @@
-# rc6 - runlevel 6 compatibility
-#
-# This task runs the old sysv-rc runlevel 6 ("reboot") scripts.
-
-start on runlevel 6
-
-stop on runlevel [!6]
-
-console output
-script
-	set $(runlevel || true)
-	if [ "$2" != "0" ] && [ "$2" != "6" ]; then
-	    set $(runlevel --set 6 || true)
-        fi
-
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 6
-end script
diff --git a/event.d/rcS b/event.d/rcS
deleted file mode 100644
index 1c0a54be..00000000
--- a/event.d/rcS
+++ /dev/null
@@ -1,31 +0,0 @@
-# rcS - runlevel compatibility
-#
-# This task runs the old sysv-rc startup scripts.
-
-start on startup
-
-stop on runlevel
-
-# Note: there can be no previous runlevel here, if we have one it's bad
-# information (we enter rc1 not rcS for maintenance).  Run /etc/rc.d/rc
-# without information so that it defaults to previous=N runlevel=S.
-console output
-script
-	runlevel --set S >/dev/null || true
-
-	/etc/rc.d/rc.sysinit 
-	runlevel --reboot || true
-end script
-post-stop script
-	if [ "$UPSTART_EVENT" = "startup" ]; then
-		runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		for t in $(cat /proc/cmdline); do
-			case $t in
-				-s|single|S|s) runlevel="S" ;;
-				[1-9])       runlevel="$t" ;;
-			esac
-		done
-		exec telinit $runlevel
-	fi
-end script
diff --git a/event.d/rcS-sulogin b/event.d/rcS-sulogin
deleted file mode 100644
index d3aa20d1..00000000
--- a/event.d/rcS-sulogin
+++ /dev/null
@@ -1,22 +0,0 @@
-# rcS-sulogin - "single-user" runlevel compatibility
-#
-# This task runs /bin/bash during "single-user" mode,
-# then continues to the default runlevel.
-
-start on runlevel S
-
-stop on runlevel
-
-console owner
-script
-	runlevel --set S >/dev/null || true
-	plymouth --hide-splash || true
-	exec /bin/bash
-end script
-post-stop script
-	if [ "$1" = "S" ]; then
-		runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		exec telinit $runlevel
-	fi
-end script
diff --git a/event.d/serial b/event.d/serial
deleted file mode 100644
index 660e93bd..00000000
--- a/event.d/serial
+++ /dev/null
@@ -1,42 +0,0 @@
-# Automatically start a configured serial console
-#
-# How this works:
-#
-# On boot, a udev helper examines /dev/console. If a serial console is the
-# primary console (last console on the commandline in grub),  the event
-# 'fedora.serial-console-available <port name> <speed>' is emitted, which
-# triggers this script. It waits for the runlevel to finish, ensures
-# the proper port is in /etc/securetty, and starts the getty.
-#
-# If your serial console is not the primary console, or you want a getty
-# on serial even if it's not the console, create your own event by copying
-# /etc/event.d/tty[2-6], and changing the getty line in that file.
-
-start on fedora.serial-console-available *
-stop on runlevel [016]
-
-instance
-pre-start script
-	while /bin/true ; do
-		LANG=C /sbin/initctl status rcS | grep -wq "rcS (stop) waiting" && break
-		sleep 1
-	done
-	while /bin/true ; do 
-		runlevel=$(/sbin/runlevel | /bin/awk '{ print $2 }')
-		case "$runlevel" in 
-			2|3|4|5)
-				LANG=C /sbin/initctl status rc$runlevel | grep -wq "rc$runlevel (stop) waiting" && break
-				;;
-			*)
-				;;
-		esac
-		sleep 1
-	done
-	/sbin/securetty $1
-end script
-exec /sbin/agetty /dev/$1 $2 vt100-nav
-post-stop script
-	if [ "$UPSTART_EVENT" != "${UPSTART_EVENT##fedora.serial-console-available}" ]; then
-		initctl emit --no-wait fedora.serial-console-available $1 $2
-	fi
-end script
diff --git a/event.d/tty1 b/event.d/tty1
deleted file mode 100644
index 7747d660..00000000
--- a/event.d/tty1
+++ /dev/null
@@ -1,15 +0,0 @@
-# tty1 - getty
-#
-# This service maintains a getty on tty1 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty1
diff --git a/event.d/tty2 b/event.d/tty2
deleted file mode 100644
index ec5f94cd..00000000
--- a/event.d/tty2
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty2 - getty
-#
-# This service maintains a getty on tty2 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty2
diff --git a/event.d/tty3 b/event.d/tty3
deleted file mode 100644
index ed95fdcf..00000000
--- a/event.d/tty3
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty3 - getty
-#
-# This service maintains a getty on tty3 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty3
diff --git a/event.d/tty4 b/event.d/tty4
deleted file mode 100644
index 76b6d717..00000000
--- a/event.d/tty4
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty4 - getty
-#
-# This service maintains a getty on tty4 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty4
diff --git a/event.d/tty5 b/event.d/tty5
deleted file mode 100644
index 9e9d8137..00000000
--- a/event.d/tty5
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty5 - getty
-#
-# This service maintains a getty on tty5 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty5
diff --git a/event.d/tty6 b/event.d/tty6
deleted file mode 100644
index 7eb42c01..00000000
--- a/event.d/tty6
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty6 - getty
-#
-# This service maintains a getty on tty6 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty6