32 files changed, 18 insertions, 2277 deletions

diff --git a/Makefile b/Makefile
index 55c6fc99..89706260 100644
--- a/Makefile
+++ b/Makefile
@@ -20,12 +20,7 @@ install:
 	mkdir -p $(ROOT)/var/lib/stateless/state
 
 	install -m644  adjtime $(ROOT)/etc
-	install -m644 inittab $(ROOT)/etc/inittab.sysv 
-	if uname -m | grep -q s390 ; then \
-	  install -m644 inittab.s390 $(ROOT)/etc/inittab.sysv ; \
-	fi
-	install -m644 inittab.upstart $(ROOT)/etc/inittab.upstart
-	install -m644 inittab.systemd $(ROOT)/etc/inittab.systemd
+	install -m644 inittab $(ROOT)/etc
 	install -m644  rwtab statetab networks $(ROOT)/etc
 	install -m755  service setsysfont $(ROOT)/sbin
 	install -m644  lang.csh lang.sh $(ROOT)/etc/profile.d
@@ -43,11 +38,10 @@ install:
 	install -m755 prefdm $(ROOT)/etc/X11/prefdm
 
 	install -m755 -d $(ROOT)/etc/rc.d $(ROOT)/etc/sysconfig
-	install -m755 rc.d/rc rc.d/rc.local rc.d/rc.sysinit $(ROOT)/etc/rc.d/
 	cp -af rc.d/init.d $(ROOT)/etc/rc.d/
 	install -m644 sysconfig/debug sysconfig/init sysconfig/netconsole sysconfig/readonly-root $(ROOT)/etc/sysconfig/
 	cp -af sysconfig/network-scripts $(ROOT)/etc/sysconfig/
-	cp -af ppp NetworkManager init $(ROOT)/etc
+	cp -af ppp NetworkManager $(ROOT)/etc
 	mkdir -p $(ROOT)/lib/systemd/
 	cp -af systemd/* $(ROOT)/lib/systemd/
 	mkdir -p $(ROOT)/etc/ppp/peers
@@ -62,7 +56,6 @@ install:
 	chmod 755 $(ROOT)/etc/sysconfig/network-scripts/init*
 	chmod 755 $(ROOT)/etc/sysconfig/network-scripts/net.hotplug
 	chmod 755 $(ROOT)/etc/NetworkManager/dispatcher.d/00-netreport
-	chmod 644 $(ROOT)/etc/init/*
 	mkdir -p $(ROOT)/etc/sysconfig/modules
 	mkdir -p $(ROOT)/etc/sysconfig/networking/devices
 	mkdir -p $(ROOT)/etc/sysconfig/networking/profiles/default
@@ -101,21 +94,6 @@ install:
 	done
 
 # Can't store symlinks in a CVS archive
-	ln -s ../init.d/killall $(ROOT)/etc/rc.d/rc0.d/S00killall
-	ln -s ../init.d/killall $(ROOT)/etc/rc.d/rc6.d/S00killall
-
-	ln -s ../init.d/halt $(ROOT)/etc/rc.d/rc0.d/S01halt
-	ln -s ../init.d/halt $(ROOT)/etc/rc.d/rc6.d/S01reboot
-
-	ln -s ../init.d/single $(ROOT)/etc/rc.d/rc1.d/S99single
-
-	ln -s ../rc.local $(ROOT)/etc/rc.d/rc2.d/S99rc-local
-	ln -s ../rc.local $(ROOT)/etc/rc.d/rc3.d/S99rc-local
-	ln -s ../rc.local $(ROOT)/etc/rc.d/rc4.d/S99rc-local
-	ln -s ../rc.local $(ROOT)/etc/rc.d/rc5.d/S99rc-local
-
-	ln -s halt $(ROOT)/etc/rc.d/init.d/reboot
-
 	mkdir -p -m 755 $(ROOT)/lib/systemd/system/multi-user.target.wants
 	mkdir -p -m 755 $(ROOT)/lib/systemd/system/graphical.target.wants
 	ln -s reboot.target $(ROOT)/lib/systemd/system/ctrl-alt-del.target
@@ -139,9 +117,6 @@ install:
 	for i in 0 1 2 3 4 5 6 ; do \
 		ln -s rc.d/rc$$i.d $(ROOT)/etc/rc$$i.d; \
 	done
-	for i in rc rc.sysinit rc.local ; do \
-		ln -s rc.d/$$i $(ROOT)/etc/$$i; \
-	done
 
 	mkdir -p -m 755 $(ROOT)/usr/libexec/initscripts/legacy-actions
 
diff --git a/NetworkManager/dispatcher.d/05-netfs b/NetworkManager/dispatcher.d/05-netfs
deleted file mode 100755
index bd558464..00000000
--- a/NetworkManager/dispatcher.d/05-netfs
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-export LC_ALL=C
-export SYSTEMCTL_SKIP_REDIRECT=1
-
-if [ "$2" = "down" ]; then
-	/sbin/ip route ls | grep -q ^default || {
-		[ -f /var/lock/subsys/netfs ] && /etc/rc.d/init.d/netfs stop || :
-	} && { :; }
-fi
-
-if [ "$2" = "up" ]; then
-	/sbin/ip -o route show dev "$1" | grep -q '^default' && {
-		/sbin/chkconfig netfs && /etc/rc.d/init.d/netfs start || :
-	} || { :; }
-fi
-
diff --git a/README-init b/README-init
deleted file mode 100644
index 9a9b4cfa..00000000
--- a/README-init
+++ /dev/null
@@ -1,26 +0,0 @@
-The upstart scripts in /etc/init originate from event-compat-sysv-0.3.9,
-and have since been heavily modified.
-
-The original copyright is:
-
-Copyright © 2008 Canonical Ltd.
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
-ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
-CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
diff --git a/init/control-alt-delete.conf b/init/control-alt-delete.conf
deleted file mode 100644
index 35cb1305..00000000
--- a/init/control-alt-delete.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-# control-alt-delete - emergency keypress handling
-#
-# This task is run whenever the Control-Alt-Delete key combination is
-# pressed.  Usually used to shut down the machine.
-
-start on control-alt-delete
-
-exec /sbin/shutdown -r now "Control-Alt-Delete pressed"
diff --git a/init/plymouth-shutdown.conf b/init/plymouth-shutdown.conf
deleted file mode 100644
index 49010848..00000000
--- a/init/plymouth-shutdown.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# plymouth-shutdown - put up shutdown splash
-#
-# This service triggers plymouth to put up a splash
-# when leaving runlevel 5.
-
-start on (splash-request IMMEDIATE=1) or (splash-request and stopped prefdm)
-
-task
-console output
-script
-        /sbin/plymouthd --mode="$MODE" || exit 1
-        /bin/plymouth --sysinit
-        /bin/plymouth --show-splash
-        /bin/plymouth message --text="$MESSAGE"
-end script
-
diff --git a/init/prefdm.conf b/init/prefdm.conf
deleted file mode 100644
index 701b8065..00000000
--- a/init/prefdm.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-# prefdm - preferred display manager
-#
-# Starts gdm/xdm/etc by preference
-
-start on stopped rc RUNLEVEL=5
-
-stop on starting rc RUNLEVEL=[!5]
-
-console output
-respawn
-respawn limit 10 120
-exec /etc/X11/prefdm -nodaemon
diff --git a/init/quit-plymouth.conf b/init/quit-plymouth.conf
deleted file mode 100644
index 7a67b071..00000000
--- a/init/quit-plymouth.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# quit-plymouth - script to stop boot splash
-#
-# This service triggers plymouth to quit when we reach the
-# end of the boot cycle. We start on 'stopping rcX' to make sure
-# this completes before the getty starts.
-# prefdm handles quit differently, though.
-
-start on runlevel S or stopping rc RUNLEVEL=[234]
-
-task
-
-script
-	 /bin/plymouth quit || :
-end script
diff --git a/init/rc.conf b/init/rc.conf
deleted file mode 100644
index e7285e47..00000000
--- a/init/rc.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# rc - System V runlevel compatibility
-#
-# This task runs the old sysv-rc runlevel scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel [0123456]
-
-stop on runlevel [!$RUNLEVEL]
-
-task
-
-export RUNLEVEL
-console output
-exec /etc/rc.d/rc $RUNLEVEL
diff --git a/init/rcS-sulogin.conf b/init/rcS-sulogin.conf
deleted file mode 100644
index 818518de..00000000
--- a/init/rcS-sulogin.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# rcS-sulogin - "single-user" runlevel compatibility
-#
-# This task runs /bin/bash during "single-user" mode,
-# then continues to the default runlevel.
-
-start on runlevel S
-
-stop on runlevel [!S]
-
-console owner
-script
-	. /etc/sysconfig/init
-	plymouth --hide-splash || true
-	[ -z "$SINGLE" ] && SINGLE=/sbin/sushell
-	exec $SINGLE
-end script
-post-stop script
-	if [ "$RUNLEVEL" = "S" ]; then
-		[ -f /etc/inittab ] && runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		exec telinit $runlevel
-	fi
-end script
diff --git a/init/rcS.conf b/init/rcS.conf
deleted file mode 100644
index 6f2e7d17..00000000
--- a/init/rcS.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-# rcS - runlevel compatibility
-#
-# This task runs the old sysv-rc startup scripts.
-
-start on startup
-
-stop on runlevel
-
-task
-
-# Note: there can be no previous runlevel here, if we have one it's bad
-# information (we enter rc1 not rcS for maintenance).  Run /etc/rc.d/rc
-# without information so that it defaults to previous=N runlevel=S.
-console output
-exec /etc/rc.d/rc.sysinit
-post-stop script
-	if [ "$UPSTART_EVENTS" = "startup" ]; then
-		[ -f /etc/inittab ] && runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		for t in $(cat /proc/cmdline); do
-			case $t in
-				-s|single|S|s) runlevel="S" ;;
-				[1-9])       runlevel="$t" ;;
-			esac
-		done
-		exec telinit $runlevel
-	fi
-end script
diff --git a/init/serial.conf b/init/serial.conf
deleted file mode 100644
index dcf7df43..00000000
--- a/init/serial.conf
+++ /dev/null
@@ -1,30 +0,0 @@
-# Automatically start a configured serial console
-#
-# How this works:
-#
-# On boot, a udev helper examines /dev/console. If a serial console is the
-# primary console (last console on the commandline in grub),  the event
-# 'fedora.serial-console-available <port name> <speed>' is emitted, which
-# triggers this script. It waits for the runlevel to finish, ensures
-# the proper port is in /etc/securetty, and starts the getty.
-#
-# If your serial console is not the primary console, or you want a getty
-# on serial even if it's not the console, create your own event e.g. 
-# /etc/init/ttyS0.conf with content:
-# # ttyS0 - agetty
-# #
-# # This service maintains a agetty on ttyS0.
-#
-# stop on runlevel [S016]
-# start on runlevel [23]
-#
-# respawn
-# exec agetty -h -L -w /dev/ttyS0 115200 vt102
-
-start on fedora.serial-console-available DEV=* and stopped rc RUNLEVEL=[2345]
-stop on runlevel [S016]
-
-instance $DEV
-respawn
-pre-start exec /sbin/securetty $DEV
-exec /sbin/agetty /dev/$DEV $SPEED vt100-nav
diff --git a/init/splash-manager.conf b/init/splash-manager.conf
deleted file mode 100644
index eea28ca4..00000000
--- a/init/splash-manager.conf
+++ /dev/null
@@ -1,22 +0,0 @@
-# splash-manager - requests splash screen
-#
-# This service emits a splash-request event when
-# its time to put up the plymouth splash
-
-start on starting rc RUNLEVEL=[06]
-task
-
-console output
-script
-        if [ "$RUNLEVEL" = "0" ]; then
-                MESSAGE=$"Shutting down..."
-        elif [ "$RUNLEVEL" = "6" ]; then
-                MESSAGE=$"Restarting..."
-        fi
-	if initctl status prefdm 2>/dev/null | grep -q stop/waiting; then
-                initctl emit splash-request IMMEDIATE=1 MODE=shutdown MESSAGE="$MESSAGE"
-        else
-                initctl emit splash-request MODE=shutdown MESSAGE="$MESSAGE"
-        fi
-end script
-
diff --git a/init/start-ttys.conf b/init/start-ttys.conf
deleted file mode 100644
index 1528cf4b..00000000
--- a/init/start-ttys.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# This service starts the configured number of gettys.
-
-start on stopped rc RUNLEVEL=[2345]
-
-env ACTIVE_CONSOLES=/dev/tty[1-6]
-env X_TTY=/dev/tty1
-task
-script
-	. /etc/sysconfig/init
-	for tty in $(echo $ACTIVE_CONSOLES) ; do
-		[ "$RUNLEVEL" = "5" -a "$tty" = "$X_TTY" ] && continue
-		initctl start tty TTY=$tty
-	done
-end script
diff --git a/init/tty.conf b/init/tty.conf
deleted file mode 100644
index fca6388e..00000000
--- a/init/tty.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-# tty - getty
-#
-# This service maintains a getty on the specified device.
-
-stop on runlevel [S016]
-
-respawn
-instance $TTY
-exec /sbin/mingetty $TTY
diff --git a/initscripts.spec b/initscripts.spec
index 1495a7bc..d7bf08a3 100644
--- a/initscripts.spec
+++ b/initscripts.spec
@@ -1,7 +1,3 @@
-%define _with_upstart 0
-%define _with_systemd 1
-%define _with_sysvinit 0
-
 Summary: The inittab file and the /etc/init.d scripts
 Name: initscripts
 Version: 9.39
@@ -12,6 +8,7 @@ Release: 1%{?dist}
 URL: http://fedorahosted.org/releases/i/n/initscripts/
 Source: http://fedorahosted.org/releases/i/n/initscripts/initscripts-%{version}.tar.bz2
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
+Obsoletes: initscripts-legacy <= 9.39
 Requires: /bin/awk, sed, coreutils
 Requires: /sbin/sysctl
 Requires: /sbin/fuser, grep
@@ -19,24 +16,9 @@ Requires: module-init-tools
 Requires: util-linux >= 2.16
 Requires: bash >= 3.0
 Requires: sysvinit-tools >= 2.87-5
-%if %{_with_upstart}
-Conflicts: upstart < 0.6.0
-Requires: mingetty
-%if ! %{_with_systemd}
-Requires: upstart-sysvinit
-%endif
-%endif
-%if %{_with_systemd}
 Conflicts: systemd < 23-1
 Conflicts: systemd-units < 23-1
-%if ! %{_with_upstart}
 Requires: systemd-sysvinit
-%endif
-%endif
-%if %{_with_sysvinit}
-Requires: SysVinit >= 2.85-38
-Requires: mingetty
-%endif
 Requires: iproute, /sbin/arping, findutils
 Requires: /etc/system-release
 Requires: udev >= 125-1
@@ -54,15 +36,6 @@ your Red Hat or Fedora system, change runlevels, and shut the system down
 cleanly.  Initscripts also contains the scripts that activate and
 deactivate most network interfaces.
 
-%package legacy
-Summary: Support for legacy booting methods
-Requires: initscripts = %{version}-%{release}
-Group: System Environment/Base
-
-%description legacy
-The initscripts-legacy package contains basic scripts that may be
-required to boot the system using older init systems
-
 %package -n debugmode
 Summary: Scripts for running in debugging mode
 Requires: initscripts
@@ -86,23 +59,6 @@ make ROOT=$RPM_BUILD_ROOT SUPERUSER=`id -un` SUPERGROUP=`id -gn` mandir=%{_mandi
 
 %find_lang %{name}
 
-%if %{_with_systemd}
- mv -f $RPM_BUILD_ROOT/etc/inittab.systemd $RPM_BUILD_ROOT/etc/inittab
-%endif
-%if %{_with_upstart}
- mv -f $RPM_BUILD_ROOT/etc/inittab.upstart $RPM_BUILD_ROOT/etc/inittab
-%endif
-%if %{_with_sysvinit}
- mv -f $RPM_BUILD_ROOT/etc/inittab.sysv $RPM_BUILD_ROOT/etc/inittab
-%endif
-%if ! %{_with_upstart}
- rm -rf $RPM_BUILD_ROOT/etc/init
-%endif
-%if ! %{_with_systemd}
- rm -rf $RPM_BUILD_ROOT/lib/systemd
-%endif
-rm -f $RPM_BUILD_ROOT/etc/inittab.*
-
 %ifnarch s390 s390x
 rm -f \
  $RPM_BUILD_ROOT/etc/sysconfig/network-scripts/ifup-ctc \
@@ -130,39 +86,25 @@ chmod 600 /var/log/btmp
 
 /sbin/chkconfig --add network
 /sbin/chkconfig --add netconsole
-%if %{_with_systemd}
 if [ $1 -eq 1 ]; then
         /bin/systemctl daemon-reload > /dev/null 2>&1 || :
 fi
-%endif
 
 %preun
 if [ $1 = 0 ]; then
-  /sbin/chkconfig --del netfs
   /sbin/chkconfig --del network
   /sbin/chkconfig --del netconsole
 fi
 
-%post legacy
-/sbin/chkconfig --add netfs
-
-%preun legacy
-if [ $1 = 0 ]; then
-  /sbin/chkconfig --del netfs
-fi
-
 %triggerun -- initscripts < 7.62
 /sbin/chkconfig --del random
 /sbin/chkconfig --del rawdevices
 exit 0
 
-%if %{_with_systemd}
 %postun
 if [ $1 -ge 1 ]; then
 	/bin/systemctl daemon-reload > /dev/null 2>&1 || :
 fi
-%endif
-
 
 %clean
 rm -rf $RPM_BUILD_ROOT
@@ -222,27 +164,15 @@ rm -rf $RPM_BUILD_ROOT
 %dir /etc/rwtab.d
 /etc/statetab
 %dir /etc/statetab.d
-%if %{_with_upstart}
-/etc/init/*
-%endif
-%if %{_with_systemd}
-/lib/systemd/*
+/lib/systemd/fedora-*
 /lib/systemd/system/*
-%endif
 %config /etc/X11/prefdm
 %config(noreplace) /etc/inittab
 %dir /etc/rc.d
 %dir /etc/rc.d/rc[0-9].d
-%config(missingok) /etc/rc.d/rc[0-9].d/*
-%exclude /etc/rc.d/rc[0-9].d/*
 /etc/rc[0-9].d
 %dir /etc/rc.d/init.d
 /etc/rc.d/init.d/*
-%exclude /etc/rc.d/init.d/netfs
-%exclude /etc/rc.d/init.d/halt
-%exclude /etc/rc.d/init.d/killall
-%exclude /etc/rc.d/init.d/reboot
-%exclude /etc/rc.d/init.d/single
 %ghost %verify(not md5 size mtime) %config(noreplace,missingok) /etc/rc.d/rc.local
 /usr/lib/sysctl.d/00-system.conf
 %exclude /etc/profile.d/debug*
@@ -259,12 +189,10 @@ rm -rf $RPM_BUILD_ROOT
 /sbin/sushell
 %attr(2755,root,root) /sbin/netreport
 /lib/udev/rules.d/*
-%exclude /lib/udev/rules.d/10-console.rules
 /lib/udev/rename_device
 /sbin/service
 /sbin/ppp-watch
 %{_mandir}/man*/*
-%exclude %{_mandir}/man*/securetty*
 %dir %attr(775,root,root) /var/run/netreport
 %dir /etc/ppp
 %dir /etc/ppp/peers
@@ -277,7 +205,7 @@ rm -rf $RPM_BUILD_ROOT
 %dir /etc/NetworkManager
 %dir /etc/NetworkManager/dispatcher.d
 /etc/NetworkManager/dispatcher.d/00-netreport
-%doc sysconfig.txt sysvinitfiles static-routes-ipv6 ipv6-tunnel.howto ipv6-6to4.howto changes.ipv6 COPYING README-init
+%doc sysconfig.txt sysvinitfiles static-routes-ipv6 ipv6-tunnel.howto ipv6-6to4.howto changes.ipv6 COPYING
 /var/lib/stateless
 %ghost %attr(0600,root,utmp) /var/log/btmp
 %ghost %attr(0664,root,utmp) /var/log/wtmp
@@ -287,26 +215,6 @@ rm -rf $RPM_BUILD_ROOT
 /lib/tmpfiles.d/initscripts.conf
 %dir /usr/libexec/initscripts/legacy-actions
 
-%files legacy
-%defattr(-,root,root)
-%config(noreplace) /etc/inittab
-/etc/NetworkManager/dispatcher.d/05-netfs
-%dir /etc/rc.d
-%dir /etc/rc.d/rc[0-9].d
-%config(missingok) /etc/rc.d/rc[0-9].d/*
-/etc/rc[0-9].d
-/etc/rc
-%dir /etc/rc.d/init.d
-/etc/rc.sysinit
-/etc/rc.d/init.d/*
-/etc/rc.d/rc
-/etc/rc.d/rc.sysinit
-/lib/udev/rules.d/*
-/lib/udev/console_init
-/lib/udev/console_check
-/sbin/securetty
-%{_mandir}/man*/securetty*
-
 %files -n debugmode
 %defattr(-,root,root)
 %config(noreplace) /etc/sysconfig/debug
diff --git a/inittab b/inittab
index de9dc70a..c9694e65 100644
--- a/inittab
+++ b/inittab
@@ -1,53 +1,15 @@
+# inittab is no longer used when using systemd.
 #
-# inittab       This file describes how the INIT process should set up
-#               the system in a certain run-level.
+# ADDING CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM.
 #
-# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#               Modified for RHS Linux by Marc Ewing and Donnie Barnes
+# Ctrl-Alt-Delete is handled by /etc/systemd/system/ctrl-alt-del.target
+#
+# systemd uses 'targets' instead of runlevels. By default, there are two main targets:
+#
+# multi-user.target: analogous to runlevel 3
+# graphical.target: analogous to runlevel 5
+#
+# To set a default target, run:
+#
+# ln -s /lib/systemd/system/<target name>.target /etc/systemd/system/default.target
 #
-
-# Default runlevel. The runlevels used by RHS are:
-#   0 - halt (Do NOT set initdefault to this)
-#   1 - Single user mode
-#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
-#   3 - Full multiuser mode
-#   4 - unused
-#   5 - X11
-#   6 - reboot (Do NOT set initdefault to this)
-# 
-id:3:initdefault:
-
-# System initialization.
-si::sysinit:/etc/rc.d/rc.sysinit
-
-l0:0:wait:/etc/rc.d/rc 0
-l1:1:wait:/etc/rc.d/rc 1
-l2:2:wait:/etc/rc.d/rc 2
-l3:3:wait:/etc/rc.d/rc 3
-l4:4:wait:/etc/rc.d/rc 4
-l5:5:wait:/etc/rc.d/rc 5
-l6:6:wait:/etc/rc.d/rc 6
-
-# Trap CTRL-ALT-DELETE
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# When our UPS tells us power has failed, assume we have a few minutes
-# of power left.  Schedule a shutdown for 2 minutes from now.
-# This does, of course, assume you have powerd installed and your
-# UPS connected and working correctly.  
-pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
-
-# If power was restored before the shutdown kicked in, cancel it.
-pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
-
-
-# Run gettys in standard runlevels
-1:2345:respawn:/sbin/mingetty tty1
-2:2345:respawn:/sbin/mingetty tty2
-3:2345:respawn:/sbin/mingetty tty3
-4:2345:respawn:/sbin/mingetty tty4
-5:2345:respawn:/sbin/mingetty tty5
-6:2345:respawn:/sbin/mingetty tty6
-
-# Run xdm in runlevel 5
-x:5:respawn:/etc/X11/prefdm -nodaemon
diff --git a/inittab.s390 b/inittab.s390
deleted file mode 100644
index 6c0a7ee1..00000000
--- a/inittab.s390
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# inittab       This file describes how the INIT process should set up
-#               the system in a certain run-level.
-#
-# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#               Modified for RHS Linux by Marc Ewing and Donnie Barnes
-#
-
-# Default runlevel. The runlevels used by RHS are:
-#   0 - halt (Do NOT set initdefault to this)
-#   1 - Single user mode
-#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
-#   3 - Full multiuser mode
-#   4 - unused
-#   5 - X11
-#   6 - reboot (Do NOT set initdefault to this)
-# 
-id:3:initdefault:
-
-# System initialization.
-si::sysinit:/etc/rc.d/rc.sysinit
-
-l0:0:wait:/etc/rc.d/rc 0
-l1:1:wait:/etc/rc.d/rc 1
-l2:2:wait:/etc/rc.d/rc 2
-l3:3:wait:/etc/rc.d/rc 3
-l4:4:wait:/etc/rc.d/rc 4
-l5:5:wait:/etc/rc.d/rc 5
-l6:6:wait:/etc/rc.d/rc 6
-
-# Trap CTRL-ALT-DELETE
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# When our UPS tells us power has failed, assume we have a few minutes
-# of power left.  Schedule a shutdown for 2 minutes from now.
-# This does, of course, assume you have powerd installed and your
-# UPS connected and working correctly.  
-pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
-
-# If power was restored before the shutdown kicked in, cancel it.
-pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
-
-
-# Run gettys in standard runlevels
-1:2345:respawn:/sbin/mingetty console --noclear
-
-# Run xdm in runlevel 5
-x:5:respawn:/etc/X11/prefdm -nodaemon
diff --git a/inittab.systemd b/inittab.systemd
deleted file mode 100644
index c9694e65..00000000
--- a/inittab.systemd
+++ /dev/null
@@ -1,15 +0,0 @@
-# inittab is no longer used when using systemd.
-#
-# ADDING CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM.
-#
-# Ctrl-Alt-Delete is handled by /etc/systemd/system/ctrl-alt-del.target
-#
-# systemd uses 'targets' instead of runlevels. By default, there are two main targets:
-#
-# multi-user.target: analogous to runlevel 3
-# graphical.target: analogous to runlevel 5
-#
-# To set a default target, run:
-#
-# ln -s /lib/systemd/system/<target name>.target /etc/systemd/system/default.target
-#
diff --git a/inittab.upstart b/inittab.upstart
deleted file mode 100644
index b9f2a19b..00000000
--- a/inittab.upstart
+++ /dev/null
@@ -1,26 +0,0 @@
-# inittab is only used by upstart for the default runlevel.
-#
-# ADDING OTHER CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM.
-#
-# System initialization is started by /etc/init/rcS.conf
-#
-# Individual runlevels are started by /etc/init/rc.conf
-#
-# Ctrl-Alt-Delete is handled by /etc/init/control-alt-delete.conf
-#
-# Terminal gettys are handled by /etc/init/tty.conf and /etc/init/serial.conf,
-# with configuration in /etc/sysconfig/init.
-#
-# For information on how to write upstart event handlers, or how
-# upstart works, see init(5), init(8), and initctl(8).
-#
-# Default runlevel. The runlevels used are:
-#   0 - halt (Do NOT set initdefault to this)
-#   1 - Single user mode
-#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
-#   3 - Full multiuser mode
-#   4 - unused
-#   5 - X11
-#   6 - reboot (Do NOT set initdefault to this)
-# 
-id:3:initdefault:
diff --git a/rc.d/init.d/halt b/rc.d/init.d/halt
deleted file mode 100755
index 8b990791..00000000
--- a/rc.d/init.d/halt
+++ /dev/null
@@ -1,213 +0,0 @@
-#!/bin/bash
-#
-# halt          This file is executed by init when it goes into runlevel
-#               0 (halt) or runlevel 6 (reboot). It kills all processes,
-#               unmounts file systems and then either halts or reboots.
-#
-# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#               Modified for RHS Linux by Damien Neil
-#
-
-NOLOCALE=1
-. /etc/init.d/functions
-
-UMOUNT="umount"
-[ ! -w /etc ] && UMOUNT="umount -n"
-
-halt_crypto() {
-    fnval=0
-    while read dst src key; do
-	[ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
-        if [ -b "/dev/mapper/$dst" ]; then
-            if /sbin/dmsetup info "$dst" | grep -q '^Open count: *0$'; then
-                action $"Stopping disk encryption for $dst" /sbin/cryptsetup remove "$dst"
-            else
-                fnval=1
-            fi
-        fi
-    done < /etc/crypttab
-    return $fnval
-}
-
-kill_all() {
-    local STRING rc
-
-    STRING=$1
-    echo -n "$STRING "
-    shift
-    /sbin/killall5 "$@"
-    rc=$?
-    # Retval: 0: success 1: error 2: no processes found to kill
-    if [ "$rc" == 1 ]; then
-        failure $"$STRING"
-    else
-        success $"$STRING"
-    fi
-    echo
-    return $rc
-}
-
-# See how we were called.
-case "$0" in
-   *halt)
-	message=$"Halting system..."
-	command="/sbin/halt"
-	;;
-   *reboot)
-	message=$"Please stand by while rebooting the system..."
-	command="/sbin/reboot"
-	kexec_command="/sbin/kexec"
-	;;
-   *)
-	echo $"$0: call me as 'halt' or 'reboot' please!"
-	exit 1
-	;;
-esac
-case "$1" in
-   *start)
-   	;;
-   *)
-	echo $"Usage: $0 {start}"
-	exit 1
-	;;
-esac
-
-# Kill all processes.
-[ "${BASH+bash}" = bash ] && enable kill
-
-# Find mdmon pid's and omit killing them
-OMITARGS=
-for i in /dev/md/*.pid; do
-    if [ ! -r "$i" ]; then
-        continue
-    fi
-    OMITARGS="$OMITARGS -o $(cat $i)"
-done
-
-kill_all $"Sending all processes the TERM signal..." -15 $OMITARGS
-# No need to sleep and kill -9 if no processes to kill were found
-if [ "$?" == 0 ]; then
-    sleep 2
-    kill_all $"Sending all processes the KILL signal..." -9 $OMITARGS
-fi
-
-# Write to wtmp file before unmounting /var
-/sbin/halt -w
-
-# Save mixer settings, here for lack of a better place.
-if [ -s /etc/alsa/alsactl.conf ] && [ -x /sbin/alsactl ] && [ -w /etc/asound.state ]; then
-  action $"Saving mixer settings" /sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --ignore store
-fi
-
-# Save random seed
-touch /var/lib/random-seed
-chmod 600 /var/lib/random-seed
-action $"Saving random seed: " dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-
-[ -x /sbin/hwclock ] && action $"Syncing hardware clock to system time" /sbin/hwclock --systohc
-
-# Try to unmount tmpfs filesystems to avoid swapping them in.  Ignore failures.
-tmpfs=$(awk '$2 ~ /^\/($|proc|dev)/ { next; }
-	     $3 == "tmpfs" { print $2; }' /proc/mounts | sort -r)
-[ -n "$tmpfs" ] && fstab-decode $UMOUNT $tmpfs 2>/dev/null
-
-# Turn off swap, then unmount file systems.
-[ -f /proc/swaps ] && SWAPS=$(awk '! /^Filename/ { print $1 }' /proc/swaps)
-if [ -n "$SWAPS" ]; then
-    action $"Turning off swap: " swapoff $SWAPS
-    for dst in $SWAPS; do
-	if [[ "$dst" == /dev/mapper* ]] \
-	    && [ "$(dmsetup status "$dst" | cut -d ' ' -f 3)" = crypt ]; then
-	    backdev=$(/sbin/cryptsetup status "$dst" \
-		| awk '$1 == "device:" { print $2 }')
-	    /sbin/cryptsetup remove "$dst"
-	fi
-    done
-fi
-
-[ -x /sbin/quotaoff ] && action $"Turning off quotas: " /sbin/quotaoff -aug
-
-# Unmount file systems, killing processes if we have to.
-# Unmount loopback stuff first
-__umount_loopback_loop
-
-# Unmount RPC pipe file systems
-__umount_loop '$3 ~ /^rpc_pipefs$/ || $3 ~ /^rpc_svc_gss_pipefs$/ {print $2}' \
-    /proc/mounts \
-    $"Unmounting pipe file systems: " \
-    $"Unmounting pipe file systems (retry): " \
-    -f
-
-LANG=C __umount_loop '$2 ~ /^\/$|^\/proc|^\/cgroup|^\/sys\/fs\/cgroup|^\/dev/{next}
-	$3 == "tmpfs" || $3 == "proc" {print $2 ; next}
-	$3 ~ /(loopfs|autofs|nfs|cifs|smbfs|ncpfs|sysfs)/ {next}
-	/(^none|^\/dev\/ram|^\/dev\/root$)/ {next}
-	{print $2}' /proc/mounts \
-	$"Unmounting file systems: " \
-	$"Unmounting file systems (retry): " \
-	-f
-
-[ -f /proc/bus/usb/devices ] && $UMOUNT /proc/bus/usb
-
-[ -f /etc/crypttab ] && halt_crypto
-
-# remove the crash indicator flag
-rm -f /.autofsck
-
-# Try all file systems other than root, essential filesystems and RAM disks,
-# one last time.
-awk '$2 !~ /\/(|dev|proc|selinux|cgroup|sys)$/ && $1 !~ /(^\/dev\/ram|cgroup)/ { print $2 }' \
-    /proc/mounts | sort -r | \
-  while read line; do
-    fstab-decode $UMOUNT -f $line
-done
-
-if [ -x /sbin/halt.local ]; then
-   /sbin/halt.local
-fi
-
-# Tell init to re-exec itself.
-kill -TERM 1
-
-# Remount read only anything that's left mounted.
-# echo $"Remounting remaining filesystems readonly"
-mount | awk '{ print $1,$3 }' | while read dev dir; do
-    fstab-decode mount -n -o ro,remount $dev $dir
-done
-
-# If we left mdmon's running wait for the raidsets to become clean
-if [ -n "$OMITARGS" ]; then
-    mdadm --wait-clean --scan
-fi
-
-# Now halt or reboot.
-echo $"$message"
-if [ -f /fastboot ]; then
- echo $"On the next boot fsck will be skipped."
-elif [ -f /forcefsck ]; then
- echo $"On the next boot fsck will be forced."
-fi
-
-# Shutdown UPS drivers
-if [ "$command" = /sbin/halt ] && [ -f /etc/sysconfig/ups ]; then
-	. /etc/sysconfig/ups
-	if [ -z $POWERDOWNFLAG ]; then
-		POWERDOWNFLAG=/etc/killpower
-	fi
-	if [ "$SERVER" = "yes" ] && [ -f $POWERDOWNFLAG ]; then
-		/sbin/upsdrvctl shutdown
-	fi
-fi
-
-# Turn off UPS in powerfail situation
-if [ -x /etc/apcupsd/apccontrol -a -f /etc/apcupsd/powerfail ]; then 
-	/etc/apcupsd/apccontrol killpower
-fi 
-
-# First, try kexec. If that fails, fall back to rebooting the old way.
-[ -n "$kexec_command" ] && $kexec_command -e -x >& /dev/null
-
-HALTARGS="-d"
-[ "$INIT_HALT" != "HALT" ] && HALTARGS="$HALTARGS -p"
-
-exec $command $HALTARGS
diff --git a/rc.d/init.d/killall b/rc.d/init.d/killall
deleted file mode 100755
index 4405879c..00000000
--- a/rc.d/init.d/killall
+++ /dev/null
@@ -1,35 +0,0 @@
-#! /bin/bash
-
-# Bring down all unneeded services that are still running (there shouldn't 
-# be any, so this is just a sanity check)
-
-case "$1" in
-   *start)
-	;;
-   *)
-	echo $"Usage: $0 {start}"
-	exit 1
-	;;
-esac
-				      
-
-for i in /var/lock/subsys/* ; do
-	# Check if the script is there.
-	[ -f "$i" ] || continue
-
-	# Get the subsystem name.
-	subsys=${i#/var/lock/subsys/}
-	
-	# Networking could be needed for NFS root.
-	[ $subsys = network ] && continue
-
-	# Bring the subsystem down.
-	if [ -f /etc/init.d/$subsys ]; then
-		/etc/init.d/$subsys stop
-	elif [ -f /etc/init.d/$subsys.init ]; then
-		/etc/init.d/$subsys.init stop
-	else
-		rm -f "$i"
-	fi
-done
-exit 0
diff --git a/rc.d/init.d/netfs b/rc.d/init.d/netfs
deleted file mode 100755
index a1bc022a..00000000
--- a/rc.d/init.d/netfs
+++ /dev/null
@@ -1,187 +0,0 @@
-#!/bin/bash
-#
-# netfs         Mount network filesystems.
-#
-# Authors:	Bill Nottingham <notting@redhat.com>
-#		AJ Lewis <alewis@redhat.com>
-# 		Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#
-# chkconfig: 345 25 75
-# description: Mounts and unmounts all Network File System (NFS), \
-#	       CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
-### BEGIN INIT INFO
-# Provides: $remote_fs
-# Short-Description: Mount and unmount network filesystems.
-# Description: Mount and unmount network filesystems.
-# Should-Start: $network
-### END INIT INFO
-
-[ -f /etc/sysconfig/network ] || exit 0
-. /etc/init.d/functions
-. /etc/sysconfig/network
-
-NFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 ~ /^nfs/ && $3 != "nfsd" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-CIFSFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "cifs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-NCPFSTAB=$(LC_ALL=C awk '!/^#/ && $3 == "ncpfs" && $4 !~ /noauto/ { print $2 }' /etc/fstab)
-NETDEVFSTAB=$(LC_ALL=C awk '!/^#/ && $4 ~/_netdev/ && $4 !~ /noauto/ { print $1 }' /etc/fstab)
-
-NFSMTAB=$(LC_ALL=C awk '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" { print $2 }' /proc/mounts)
-CIFSMTAB=$(LC_ALL=C awk '$3 == "cifs" { print $2 }' /proc/mounts | tac)
-NCPMTAB=$(LC_ALL=C awk '$3 == "ncpfs" { print $2 }' /proc/mounts | tac)
-NETDEVMTAB=$(LC_ALL=C awk '$4 ~ /_netdev/ && $2 != "/" { print $2 }' /etc/mtab)
-
-# See how we were called.
-case "$1" in
-  start)
-        [ ! -f /var/lock/subsys/network ] && ! nm-online -x >/dev/null 2>&1 && exit 0
-        [ "$EUID" != "0" ] && exit 4
-        [ -n "$NFSFSTAB" ] && 
-	  {
-	    [ ! -f /var/lock/subsys/rpcbind ] && service rpcbind start
-	    action $"Mounting NFS filesystems: " mount -a -t nfs,nfs4
-	  }
-        [ -n "$CIFSFSTAB" ] && action $"Mounting CIFS filesystems: " mount -a -t cifs
-        [ -n "$NCPFSTAB" ] && action $"Mounting NCP filesystems: " mount -a -t ncpfs
-        [ -n "$NETDEVFSTAB" ] &&
-	  {
-	    if [ -f /etc/mdadm.conf ] && [ -x /sbin/mdadm ]; then
-		/sbin/mdadm -A -s
-	    fi
-	    if [ -f /etc/multipath.conf ] && [ -x /sbin/multipath ]; then
-	    	modprobe dm-multipath >/dev/null 2>&1
-		/sbin/multipath -u -v 0
-		if [ -x /sbin/kpartx ]; then
-		       /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -u -a -p p"
-		fi
-	    fi
-	    if [ -x /sbin/lvm ]; then
-		if /sbin/lvm vgscan > /dev/null 2>&1 ; then
-		       action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y
-		fi
-	    fi
-
-	    if [ -f /etc/crypttab ]; then
-	        init_crypto 1
-	    fi
-
-	    STRING=$"Checking network-attached filesystems"
-	    
-	    echo $STRING
-	    fsck -A -T -M -a -t opts=_netdev
-	    rc=$?
-	    
-	    if [ "$rc" -eq "0" ]; then
-	    	success "$STRING"
-		echo
-	    elif [ "$rc" -eq "1" ]; then
-	        passed "$STRING"
-	        echo
-	    fi
-	    
-	    if [ "$rc" -gt 1 ]; then
-		if [ -x /bin/plymouth ] && /bin/plymouth --ping ; then
-			/bin/plymouth --hide-splash
-		fi
-		failure "$STRING"
-		tty >/dev/null 2>&1 || exit 1
-		echo
-		echo
-		echo $"*** An error occurred during the file system check."
-		echo $"*** Dropping you to a shell; the system will reboot"
-		echo $"*** when you leave the shell."
-		
-		str=$"(Repair filesystem)"
-		PS1="$str \# # "; export PS1
-		[ "$SELINUX" = "1" ] && disable_selinux
-		sulogin
-		
-		shutdown -r now
-	   fi
-	  }
-	touch /var/lock/subsys/netfs
-	# The 'no' applies to all listed filesystem types. See mount(8).
-	action $"Mounting other filesystems: " mount -a -t nonfs,nfs4,cifs,ncpfs,gfs2
-	;;
-  stop)
-        # Unmount loopback stuff first
-        [ "$EUID" != "0" ] && exit 4
-	__umount_loopback_loop
-  	if [ -n "$NETDEVMTAB" ]; then
-		__umount_loop '$4 ~ /_netdev/ && $2 != "/" {print $2}' \
-			/etc/mtab \
-			$"Unmounting network block filesystems: " \
-			$"Unmounting network block filesystems (retry): "
-	fi
-  	if [ -n "$NFSMTAB" ]; then
-		__umount_loop '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" {print $2}' \
-			/proc/mounts \
-			$"Unmounting NFS filesystems: " \
-			$"Unmounting NFS filesystems (retry): " \
-			"-f -l"
-	fi
-	if [ -n "$CIFSMTAB" ]; then
-		for MNT in $CIFSMTAB; do
-			action $"Unmounting CIFS filesystem: $MNT" umount "$MNT"
-		done
-	fi
-	if [ -n "$NCPMTAB" ]; then
-		for MNT in $NCPMTAB; do
-			action $"Unmounting NCP filesystem: $MNT" umount "$MNT"
-		done
-	fi
-	rm -f /var/lock/subsys/netfs
-	;;
-  status)
-	if [ -f /proc/mounts ] ; then
-	        [ -n "$NFSFSTAB" ] && {
-		     echo $"Configured NFS mountpoints: "
-		     for fs in $NFSFSTAB; do echo $fs ; done
-		}
-	        [ -n "$CIFSFSTAB" ] && {
-		     echo $"Configured CIFS mountpoints: "
-		     for fs in $CIFSFSTAB; do echo $fs ; done
-		}
-	        [ -n "$NCPFSTAB" ] && {
-		     echo $"Configured NCP mountpoints: "
-		     for fs in $NCPFSTAB; do echo $fs ; done
-		}
-		[ -n "$NETDEVFSTAB" ] && {
-		      echo $"Configured network block devices: "
-		      for fs in $NETDEVFSTAB; do echo $fs ; done
-		}
-		[ -n "$NFSMTAB" ] && {
-                      echo $"Active NFS mountpoints: "
-		      for fs in $NFSMTAB; do echo $fs ; done
-		}
-		[ -n "$CIFSMTAB" ] && {
-                      echo $"Active CIFS mountpoints: "
-		      for fs in $CIFSMTAB; do echo $fs ; done
-		}
-		[ -n "$NCPMTAB" ] && {
-                      echo $"Active NCP mountpoints: "
-		      for fs in $NCPMTAB; do echo $fs ; done
-		}
-		[ -n "$NETDEVMTAB" ] && {
-		      echo $"Active network block devices: "
-		      for fs in $NETDEVMTAB; do echo $fs ; done
-		}
-	else
-		echo $"/proc filesystem unavailable"
-	fi
-	[ -r /var/lock/subsys/netfs ] || exit 3
-	;;
-  restart)
-	$0 stop
-	$0 start
-	exit $?
-	;;
-  reload)
-        $0 start
-	exit $?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|reload|status}"
-	exit 2
-esac
-
-exit 0
diff --git a/rc.d/init.d/single b/rc.d/init.d/single
deleted file mode 100755
index 0ae9268e..00000000
--- a/rc.d/init.d/single
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/bash
-#
-#
-# rc.single     This file is executed by init when it goes into runlevel
-#               1, which is the administrative state. It kills all
-#               deamons and then puts the system into single user mode.
-#               Note that the file systems are kept mounted.
-#
-# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#               Modified for RHS Linux by Damien Neil
-#
-
-. /etc/init.d/functions
-
-if [ "$1" != "start" ]; then
-   exit 0
-fi
-
-# this looks nicer
-[ -x /usr/bin/clear ] && /usr/bin/clear
-
-# Now go to the single user level.
-echo $"Telling INIT to go to single user mode."
-exec init -t1 S
diff --git a/rc.d/rc b/rc.d/rc
deleted file mode 100755
index d7b68b69..00000000
--- a/rc.d/rc
+++ /dev/null
@@ -1,104 +0,0 @@
-#! /bin/bash
-#
-# rc            This file is responsible for starting/stopping
-#               services when the runlevel changes.
-#
-# Original Author:       
-#               Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
-#
-
-set -m
-
-# check a file to be a correct runlevel script
-check_runlevel ()
-{
-	# Check if the file exists at all.
-	[ -x "$1" ] || return 1
-	is_ignored_file "$1" && return 1
-	return 0
-}
-
-# Now find out what the current and what the previous runlevel are.
-argv1="$1"
-set $(/sbin/runlevel)
-runlevel=$2
-previous=$1
-export runlevel previous
-
-. /etc/init.d/functions
-
-export CONSOLETYPE
-do_confirm="no"
-if [ -f /var/run/confirm ]; then
-	do_confirm="yes"
-fi
-UPSTART=
-[ -x /sbin/initctl ] && UPSTART=yes
-# See if we want to be in user confirmation mode
-if [ "$previous" = "N" ]; then
-	if [ "$do_confirm" = "yes" ]; then
-		echo $"Entering interactive startup"
-	else
-		echo $"Entering non-interactive startup"
-	fi
-fi
-
-# Get first argument. Set new runlevel to this argument.
-[ -n "$argv1" ] && runlevel="$argv1"
-
-# Is there an rc directory for this new runlevel?
-[ -d /etc/rc$runlevel.d ] || exit 0
-
-# Set language, vc settings once to avoid doing it for every init script
-# through functions
-if [ -z "${NOLOCALE:-}" ] && [ -f /etc/sysconfig/i18n -o -f /etc/locale.conf ] ; then
-  . /etc/profile.d/lang.sh 2>/dev/null
-  export LANGSH_SOURCED=1
-fi
-
-# First, run the KILL scripts.
-for i in /etc/rc$runlevel.d/K* ; do
-
-	# Check if the subsystem is already up.
-	subsys=${i#/etc/rc$runlevel.d/K??}
-	[ -f /var/lock/subsys/$subsys ] || [ -f /var/lock/subsys/$subsys.init ] || continue
-	check_runlevel "$i" || continue
-
-	# Bring the subsystem down.
-	[ -n "$UPSTART" ] && initctl emit --quiet stopping JOB=$subsys
-	$i stop
-	[ -n "$UPSTART" ] && initctl emit --quiet stopped JOB=$subsys
-done
-
-# Now run the START scripts.
-for i in /etc/rc$runlevel.d/S* ; do
-
-	# Check if the subsystem is already up.
-	subsys=${i#/etc/rc$runlevel.d/S??}
-	[ -f /var/lock/subsys/$subsys ] && continue
-	[ -f /var/lock/subsys/$subsys.init ] && continue
-	check_runlevel "$i" || continue
-		    
-	# If we're in confirmation mode, get user confirmation
-	if [ "$do_confirm" = "yes" ]; then
-		confirm $subsys
-		rc=$?
-		if [ "$rc" = "1" ]; then
-			continue
-		elif [ "$rc" = "2" ]; then
-			do_confirm="no"
-		fi
-	fi
-
-	update_boot_stage "$subsys"
-	# Bring the subsystem up.
-	[ -n "$UPSTART" ] && initctl emit --quiet starting JOB=$subsys
-	if [ "$subsys" = "halt" -o "$subsys" = "reboot" ]; then
-		export LC_ALL=C
-		exec $i start
-	fi
-	$i start
-	[ -n "$UPSTART" ] && initctl emit --quiet started JOB=$subsys
-done
-[ "$do_confirm" = "yes" ] && rm -f /var/run/confirm
-exit 0
diff --git a/rc.d/rc.local b/rc.d/rc.local
deleted file mode 100755
index c6a8faf1..00000000
--- a/rc.d/rc.local
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-#
-# This script will be executed at the end of the boot process.
-# You can put your own initialization stuff in here if you don't
-# want to do the full Sys V style init stuff.
-
-touch /var/lock/subsys/local
diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
deleted file mode 100755
index 6363e4ca..00000000
--- a/rc.d/rc.sysinit
+++ /dev/null
@@ -1,666 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.d/rc.sysinit - run once at boot time
-#
-# Taken in part from Miquel van Smoorenburg's bcheckrc.
-#
-
-HOSTNAME=$(/bin/hostname)
-
-set -m
-
-if [ -f /etc/sysconfig/network ]; then
-    . /etc/sysconfig/network
-fi
-if [ -r /etc/hostname ]; then
-    HOSTNAME=$(cat /etc/hostname)
-fi
-if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
-    HOSTNAME=localhost
-fi
-
-if [ ! -e /proc/mounts ]; then
-	mount -n -t proc /proc /proc
-	mount -n -t sysfs /sys /sys >/dev/null 2>&1
-fi
-if [ ! -d /proc/bus/usb ]; then
-	modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-else
-	mount -n -t usbfs /proc/bus/usb /proc/bus/usb
-fi
-
-. /etc/init.d/functions
-
-PLYMOUTH=
-[ -x /bin/plymouth ] && PLYMOUTH=yes
-
-# Check SELinux status
-SELINUX_STATE=
-if [ -e "/sys/fs/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then
-	if [ -r "/sys/fs/selinux/enforce" ] ; then
-		SELINUX_STATE=$(cat "/sys/fs/selinux/enforce")
-	else
-		# assume enforcing if you can't read it
-		SELINUX_STATE=1
-	fi
-fi
-
-if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then
-	/sbin/restorecon  -R /dev 2>/dev/null
-fi
-
-disable_selinux() {
-	echo $"*** Warning -- SELinux is active"
-	echo $"*** Disabling security enforcement for system recovery."
-	echo $"*** Run 'setenforce 1' to reenable."
-	echo "0" > "/sys/fs/selinux/enforce"
-}
-
-relabel_selinux() {
-    # if /sbin/init is not labeled correctly this process is running in the
-    # wrong context, so a reboot will be required after relabel
-    AUTORELABEL=
-    . /etc/selinux/config
-    echo "0" > /sys/fs/selinux/enforce
-    [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
-    if [ "$AUTORELABEL" = "0" ]; then
-	echo
-	echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required. "
-	echo $"*** /etc/selinux/config indicates you want to manually fix labeling"
-	echo $"*** problems. Dropping you to a shell; the system will reboot"
-	echo $"*** when you leave the shell."
-	sulogin
-
-    else
-	echo
-	echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required."
-	echo $"*** Relabeling could take a very long time, depending on file"
-	echo $"*** system size and speed of hard drives."
-
-	/sbin/fixfiles -F restore > /dev/null 2>&1
-    fi
-    rm -f  /.autorelabel
-    echo $"Unmounting file systems"
-    umount -a
-    mount -n -o remount,ro /
-    echo $"Automatic reboot in progress."
-    reboot -f
-}
-
-# Print a text banner.
-echo -en $"\t\tWelcome to "
-read -r system_release < /etc/system-release
-if [[ "$system_release" == *"Red Hat"* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
- echo -en "Red Hat"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Red Hat \(.*\) release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-elif [[ "$system_release" == *Fedora* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;34m"
- echo -en "Fedora"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Fedora \(.*\) \?release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-else
- PRODUCT=$(sed "s/ release.*//g" /etc/system-release)
- echo "$PRODUCT"
-fi
-
-# Only read this once.
-cmdline=$(cat /proc/cmdline)
-
-# Initialize hardware
-if [ -f /proc/sys/kernel/modprobe ]; then
-   if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
-       sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
-   else
-       # We used to set this to NULL, but that causes 'failed to exec' messages"
-       sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
-   fi
-fi
-
-touch /dev/.in_sysinit >/dev/null 2>&1
-
-# Set default affinity
-if [ -x /bin/taskset ]; then
-   if strstr "$cmdline" default_affinity= ; then
-     for arg in $cmdline ; do
-         if [ "${arg##default_affinity=}" != "${arg}" ]; then
-             /bin/taskset -p ${arg##default_affinity=} 1
-         fi
-     done
-   fi
-fi
-
-nashpid=$(pidof nash 2>/dev/null)
-[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
-unset nashpid
-action $"Starting udev: " /sbin/udevd --daemon
-/sbin/udevadm trigger --type=subsystems --action=add
-/sbin/udevadm trigger --type=devices --action=add
-/sbin/udevadm settle
-
-# Load other user-defined modules
-for file in /etc/sysconfig/modules/*.modules ; do
-  [ -x $file ] && $file
-done
-
-# Load modules (for backward compatibility with VARs)
-if [ -f /etc/rc.modules ]; then
-	/etc/rc.modules
-fi
-
-mount -n /dev/pts >/dev/null 2>&1
-[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
-
-# Configure kernel parameters
-update_boot_stage RCkernelparam
-apply_sysctl
-
-# Set the hostname.
-update_boot_stage RChostname
-action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
-
-# Sync waiting for storage.
-{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
-
-# Device mapper & related initialization
-if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
-       modprobe dm-mod >/dev/null 2>&1
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 0
-fi
-
-if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf ] && \
-		[ -x /sbin/multipath ]; then
-	modprobe dm-multipath > /dev/null 2>&1
-	/sbin/multipath -v 0
-	if [ -x /sbin/kpartx ]; then
-		/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null
-	fi
-fi
-
-if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
-	modprobe dm-mirror >/dev/null 2>&1
-	dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
-	if [ "$?" = "0" ]; then
-		for dmname in $dmraidsets; do
-			if [[ "$dmname" == isw_* ]] && \
-			   ! strstr "$cmdline" noiswmd; then
-				continue
-			fi
-			/sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
-			/sbin/kpartx -a -p p "/dev/mapper/$dmname"
-		done
-	fi
-fi
-
-# Start any MD RAID arrays that haven't been started yet
-[ -r /proc/mdstat ] && [ -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
-
-if [ -x /sbin/lvm ]; then
-	action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --sysinit
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 0
-fi
-
-if strstr "$cmdline" fastboot || [ -f /fastboot ]; then
-	fastboot=yes
-fi
-
-if [ -f /fsckoptions ]; then
-	fsckoptions=$(cat /fsckoptions)
-fi
-
-if strstr "$cmdline" forcefsck || [ -f /forcefsck ]; then
-	fsckoptions="-f $fsckoptions"
-elif [ -f /.autofsck ]; then
-	[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
-	if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
-		AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
-	fi
-	if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
-		[ -n "$PLYMOUTH" ] && plymouth --hide-splash
-		echo
-		echo $"*** Warning -- the system did not shut down cleanly. "
-		echo $"*** Dropping you to a shell; the system will continue"
-		echo $"*** when you leave the shell."
-		[ -n "$SELINUX_STATE" ] && echo "0" > /sys/fs/selinux/enforce
-		sulogin
-		[ -n "$SELINUX_STATE" ] && echo "1" > /sys/fs/selinux/enforce
-		[ -n "$PLYMOUTH" ] && plymouth --show-splash
-	fi
-	fsckoptions="$AUTOFSCK_OPT $fsckoptions"
-fi
-
-if [ "$BOOTUP" = "color" ]; then
-	fsckoptions="-C $fsckoptions"
-else
-	fsckoptions="-V $fsckoptions"
-fi
-
-READONLY=
-if [ -f /etc/sysconfig/readonly-root ]; then
-	. /etc/sysconfig/readonly-root
-fi
-if strstr "$cmdline" readonlyroot ; then
-	READONLY=yes
-	[ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
-	[ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state
-fi
-if strstr "$cmdline" noreadonlyroot ; then
-	READONLY=no
-fi
-
-if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
-
-	mount_empty() {
-		if [ -e "$1" ]; then
-			echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	mount_dirs() {
-		if [ -e "$1" ]; then
-			mkdir -p "$RW_MOUNT$1"
-			find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	mount_files() {
-		if [ -e "$1" ]; then
-			cp -a --parents "$1" "$RW_MOUNT"
-			mount -n --bind "$RW_MOUNT$1" "$1"
-		fi
-	}
-
-	# Common mount options for scratch space regardless of
-	# type of backing store
-	mountopts=
-
-	# Scan partitions for local scratch storage
-	rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
-
-	# First try to mount scratch storage from /etc/fstab, then any
-	# partition with the proper label.  If either succeeds, be sure
-	# to wipe the scratch storage clean.  If both fail, then mount
-	# scratch storage via tmpfs.
-	if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
-		rm -rf "$RW_MOUNT" > /dev/null 2>&1
-	elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then
-		rm -rf "$RW_MOUNT"  > /dev/null 2>&1
-	else
-		mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT"
-	fi
-
-	for file in /etc/rwtab /etc/rwtab.d/* /run/initramfs/rwtab; do
-		is_ignored_file "$file" && continue
-	[ -f $file ] && cat $file | while read type path ; do
-			case "$type" in
-				empty)
-					mount_empty $path
-					;;
-				files)
-					mount_files $path
-					;;
-				dirs)
-					mount_dirs $path
-					;;
-				*)
-					;;
-			esac
-			[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-		done
-	done
-
-	# Use any state passed by initramfs
-	[ -d /run/initramfs/state ] && cp -a /run/initramfs/state/* $RW_MOUNT
-
-	# In theory there should be no more than one network interface active
-	# this early in the boot process -- the one we're booting from.
-	# Use the network address to set the hostname of the client.  This
-	# must be done even if we have local storage.
-	ipaddr=
-	if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
-		ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }')
-		for ip in $ipaddr ; do
-			HOSTNAME=
-			eval $(ipcalc -h $ip 2>/dev/null)
-			[ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; }
-		done
-	fi
-	
-	# Clients with read-only root filesystems may be provided with a
-	# place where they can place minimal amounts of persistent
-	# state.  SSH keys or puppet certificates for example.
-	#
-	# Ideally we'll use puppet to manage the state directory and to
-	# create the bind mounts.  However, until that's all ready this
-	# is sufficient to build a working system.
-
-	# First try to mount persistent data from /etc/fstab, then any
-	# partition with the proper label, then fallback to NFS
-	state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
-	if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
-		/bin/true
-	elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1;  then
-		/bin/true
-	elif [ ! -z "$CLIENTSTATE" ]; then
-		# No local storage was found.  Make a final attempt to find
-		# state on an NFS server.
-
-		mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
-	fi
-
-	if [ -w "$STATE_MOUNT" ]; then
-
-		mount_state() {
-			if [ -e "$1" ]; then
-				[ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT"
-				mount -n --bind "$STATE_MOUNT$1" "$1"
-			fi
-		}
-
-		for file in /etc/statetab /etc/statetab.d/* ; do
-			is_ignored_file "$file" && continue
-			[ ! -f "$file" ] && continue
-
-			if [ -f "$STATE_MOUNT/$file" ] ; then
-				mount -n --bind "$STATE_MOUNT/$file" "$file"
-			fi
-
-			for path in $(grep -v "^#" "$file" 2>/dev/null); do
-				mount_state "$path"
-				[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-			done
-		done
-
-		if [ -f "$STATE_MOUNT/files" ] ; then
-			for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do
-				mount_state "$path"
-				[ -n "$SELINUX_STATE" ] && [ -e "$path" ] && restorecon -R "$path"
-			done
-		fi
-	fi
-fi
-
-if [[ " $fsckoptions" != *" -y"* ]]; then
-	fsckoptions="-a $fsckoptions"
-fi
-
-_RUN_QUOTACHECK=0
-if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
-	_RUN_QUOTACHECK=1
-fi
-if [ -z "$fastboot" -a "$READONLY" != "yes" ]; then
-
-        STRING=$"Checking filesystems"
-	echo $STRING
-	fsck -T -t noopts=_netdev -A $fsckoptions
-	rc=$?
-	
-	if [ "$rc" -eq "0" ]; then
-		success "$STRING"
-		echo
-	elif [ "$rc" -eq "1" ]; then
-	        passed "$STRING"
-		echo
-	elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
-		echo $"Unmounting file systems"
-		umount -a
-		mount -n -o remount,ro /
-		echo $"Automatic reboot in progress."
-		reboot -f
-        fi
-	
-        # A return of 4 or higher means there were serious problems.
-	if [ $rc -gt 1 ]; then
-		[ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
-		failure "$STRING"
-		echo
-		echo
-		echo $"*** An error occurred during the file system check."
-		echo $"*** Dropping you to a shell; the system will reboot"
-		echo $"*** when you leave the shell."
-
-                str=$"(Repair filesystem)"
-		PS1="$str \# # "; export PS1
-		[ "$SELINUX_STATE" = "1" ] && disable_selinux
-		sulogin
-
-		echo $"Unmounting file systems"
-		umount -a
-		mount -n -o remount,ro /
-		echo $"Automatic reboot in progress."
-		reboot -f
-	elif [ "$rc" -eq "1" ]; then
-		_RUN_QUOTACHECK=1
-	fi
-fi
-
-remount_needed() {
-  local state oldifs
-  [ "$READONLY" = "yes" ] && return 1
-  state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts)
-  oldifs=$IFS
-  IFS=","
-  for opt in $state ; do
-	if [ "$opt" = "rw" ]; then
-		IFS=$oldifs
-		return 1
-	fi
-  done
-  IFS=$oldifs
-  return 0
-}
-
-# Remount the root filesystem read-write.
-update_boot_stage RCmountfs
-if remount_needed ; then
-  action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
-fi
-
-# Clean up SELinux labels
-if [ -n "$SELINUX_STATE" ]; then
-   restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
-fi
-
-# If relabeling, relabel mount points.
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
-    if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
-	restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
-    fi
-fi
-
-if [ "$READONLY" != "yes" ] ; then
-	# Clear mtab
-	(> /etc/mtab) &> /dev/null
-
-	# Remove stale backups
-	rm -f /etc/mtab~ /etc/mtab~~
-
-	# Enter mounted filesystems into /etc/mtab
-	mount -f /
-	mount -f /proc >/dev/null 2>&1
-	mount -f /sys >/dev/null 2>&1
-	mount -f /dev/pts >/dev/null 2>&1
-	mount -f /dev/shm >/dev/null 2>&1
-	mount -f /proc/bus/usb >/dev/null 2>&1
-fi
-
-# Mount all other filesystems (except for NFS and /proc, which is already
-# mounted). Contrary to standard usage,
-# filesystems are NOT unmounted in single user mode.
-# The 'no' applies to all listed filesystem types. See mount(8).
-if [ "$READONLY" != "yes" ] ; then
-	action $"Mounting local filesystems: " mount -a -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-else
-	action $"Mounting local filesystems: " mount -a -n -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
-fi
-
-# Update quotas if necessary
-if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
-	action $"Checking local filesystem quotas: " /sbin/quotacheck -anug
-fi
-
-if [ -x /sbin/quotaon ]; then
-    action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
-fi
-
-# Check to see if a full relabel is needed
-if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
-    if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
-	relabel_selinux
-    fi
-else
-    if [ "$READONLY" != "yes" ] && [ -d /etc/selinux ]; then
-        [ -f /.autorelabel ] || touch /.autorelabel
-    fi
-fi
-
-# Initialize pseudo-random number generator
-if [ -f "/var/lib/random-seed" ]; then
-	cat /var/lib/random-seed > /dev/urandom
-else
-	[ "$READONLY" != "yes" ] && touch /var/lib/random-seed
-fi
-if [ "$READONLY" != "yes" ]; then
-	chmod 600 /var/lib/random-seed
-	dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-fi
-
-if [ -f /etc/crypttab ]; then
-    init_crypto 1
-fi
-
-# Configure machine if necessary.
-if [ -f /.unconfigured ]; then
-
-    if [ -x /bin/plymouth ]; then
-        /bin/plymouth quit
-    fi
-
-    if [ -x /usr/bin/system-config-keyboard ]; then
-	/usr/bin/system-config-keyboard
-    fi
-    if [ -x /usr/bin/passwd ]; then
-        /usr/bin/passwd root
-    fi
-    if [ -x /usr/sbin/system-config-network-tui ]; then
-	/usr/sbin/system-config-network-tui
-    fi
-    if [ -x /usr/sbin/timeconfig ]; then
-	/usr/sbin/timeconfig
-    fi
-    if [ -x /usr/sbin/authconfig-tui ]; then
-	/usr/sbin/authconfig-tui --nostart
-    fi
-    if [ -x /usr/sbin/ntsysv ]; then
-	/usr/sbin/ntsysv --level 35
-    fi
-
-    # Reread in network configuration data.
-    if [ -f /etc/sysconfig/network ]; then
-	. /etc/sysconfig/network
-
-	# Reset the hostname.
-	action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
-    fi
-
-    rm -f /.unconfigured
-fi
-
-# Clean out /.
-rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
-	/poweroff /.suspended &> /dev/null
-
-# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
-_NEED_XFILES=
-[ -f /var/run/utmpx ] || [ -f /var/log/wtmpx ] && _NEED_XFILES=1
-
-# Clean up /var.
-rm -rf /var/lock/cvs/* /var/run/screen/*
-find /var/lock /var/run ! -type d -exec rm -f {} \;
-rm -f /var/lib/rpm/__db* &> /dev/null
-rm -f /var/gdm/.gdmfifo &> /dev/null
-
-# Clean up utmp/wtmp
-> /var/run/utmp
-touch /var/log/wtmp /var/log/btmp
-chgrp utmp /var/run/utmp /var/log/wtmp /var/log/btmp
-chmod 0664 /var/run/utmp /var/log/wtmp
-chmod 0600 /var/log/btmp
-if [ -n "$_NEED_XFILES" ]; then
-  > /var/run/utmpx
-  touch /var/log/wtmpx
-  chgrp utmp /var/run/utmpx /var/log/wtmpx
-  chmod 0664 /var/run/utmpx /var/log/wtmpx
-fi
-[ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* /var/log/btmp >/dev/null 2>&1
-
-# Clean up various /tmp bits
-[ -n "$SELINUX_STATE" ] && restorecon /tmp
-rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
-rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
-       /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-*  \
-       /tmp/scrollkeeper-*  /tmp/ssh-* \
-       /dev/.in_sysinit
-
-# Make ICE directory
-mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
-chown root:root /tmp/.ICE-unix
-[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
-
-# Start up swapping.
-update_boot_stage RCswap
-action $"Enabling /etc/fstab swaps: " swapon -a -e
-if [ "$AUTOSWAP" = "yes" ]; then
-	curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
-	swappartitions=$(blkid -t TYPE=swap -o device)
-	if [ x"$swappartitions" != x ]; then
-		for partition in $swappartitions ; do
-			[ ! -e $partition ] && continue
-			majmin=$(get_numeric_dev dec $partition)
-			echo $curswap | grep -qw "$majmin" || action $"Enabling local swap partitions: " swapon $partition
-		done
-	fi
-fi
-
-# Set up binfmt_misc
-/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
-
-# Boot time profiles. Yes, this should be somewhere else.
-if strstr "$cmdline" netprofile= && [ -x /usr/sbin/system-config-network-cmd ]; then
-    for arg in $cmdline ; do
-        if [ "${arg##netprofile=}" != "${arg}" ]; then
-	    /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
-        fi
-    done
-fi
-
-# Now that we have all of our basic modules loaded and the kernel going,
-# let's dump the syslog ring somewhere so we can find it later
-[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
-dmesg -s 131072 > /var/log/dmesg
-
-# create the crash indicator flag to warn on crashes, offer fsck with timeout
-touch /.autofsck &> /dev/null
-
-if strstr "$cmdline" confirm ; then
-	touch /var/run/confirm
-fi
-
-# Let rhgb know that we're leaving rc.sysinit
-if [ -x /bin/plymouth ]; then
-    /bin/plymouth --sysinit
-fi
-
diff --git a/src/Makefile b/src/Makefile
index b478cb9f..68833182 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -1,8 +1,7 @@
 CFLAGS+=$(RPM_OPT_FLAGS) -Wall -D_GNU_SOURCE
 
 PROGS=usernetctl netreport testd usleep ipcalc \
-	fstab-decode getkey ppp-watch consoletype genhostid rename_device \
-	console_init console_check securetty
+	fstab-decode getkey ppp-watch consoletype genhostid rename_device
 PPPWATCH_OBJS=ppp-watch.o shvar.o
 CONSOLE_INIT_OBJS=console_init.o shvar.o
 USLEEP_OBJS=usleep.o
@@ -28,11 +27,8 @@ install:
 	install -m 755 getkey $(ROOT)/sbin/getkey
 	install -m 755 ppp-watch $(ROOT)/sbin/ppp-watch
 	install -m 755 consoletype $(ROOT)/sbin/consoletype
-	install -m 755 securetty $(ROOT)/sbin/securetty
 	install -m 755 sushell $(ROOT)/sbin/sushell
 	install -m 755 rename_device $(ROOT)/lib/udev/rename_device
-	install -m 755 console_init $(ROOT)/lib/udev/console_init
-	install -m 755 console_check $(ROOT)/lib/udev/console_check
 	install -m 644 genhostid.1 $(ROOT)$(mandir)/man1
 	install -m 644 getkey.1 $(ROOT)$(mandir)/man1
 	install -m 644 netreport.1 $(ROOT)$(mandir)/man1
@@ -44,7 +40,6 @@ install:
 	install -m 644 consoletype.1 $(ROOT)$(mandir)/man1
 	install -m 644 ifup.8 $(ROOT)$(mandir)/man8
 	install -m 644 setsysfont.8 $(ROOT)$(mandir)/man8
-	install -m 644 securetty.8 $(ROOT)$(mandir)/man8
 	install -m 644 sushell.8 $(ROOT)$(mandir)/man8
 	ln -s ifup.8 $(ROOT)$(mandir)/man8/ifdown.8
 
@@ -72,9 +67,6 @@ usernetctl.o: usernetctl.c
 usernetctl: usernetctl.c usernetctl.o
 	$(CC) $(LDFLAGS) -pie -o $@ $@.o
 
-securetty: securetty.o
-	$(CC) $(LDFLAGS) -o $@ $<
-
 shvar.o: shvar.c
 	$(CC) $(CFLAGS) `pkg-config glib-2.0 --cflags` -c shvar.c -o shvar.o
 
@@ -84,8 +76,3 @@ ppp-watch.o: ppp-watch.c
 rename_device: rename_device.c
 	$(CC) $(CFLAGS) `pkg-config glib-2.0 --cflags` -o $@ $< `pkg-config glib-2.0 --libs`
 
-console_init.o: console_init.c
-	$(CC) $(CFLAGS) `pkg-config glib-2.0 --cflags` -c console_init.c -o console_init.o
-
-console_init: $(CONSOLE_INIT_OBJS)
-	$(CC) $(LDFLAGS) -o $@ $(CONSOLE_INIT_OBJS) `pkg-config glib-2.0 --libs`
diff --git a/src/console_check.c b/src/console_check.c
deleted file mode 100644
index 8d01d829..00000000
--- a/src/console_check.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright (c) 2008-2009 Red Hat, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include <sys/ioctl.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#ifndef PORT_OMAP
-/* from linux-2.6/include/linux/serial_core.h commit b612633b */
-#define PORT_OMAP 96
-#endif
-
-struct speeds
-{
-	speed_t speed;
-	unsigned long value;
-};
-
-struct speeds speed_map[] =
-{
-	{B50, 50},
-	{B75, 75},
-	{B110, 110},
-        {B134, 134},
-        {B150, 150},
-        {B200, 200},
-        {B300, 300},
-        {B600, 600},
-        {B1200, 1200},
-        {B1800, 1800},
-        {B2400, 2400},
-        {B4800, 4800},
-        {B9600, 9600},
-        {B19200, 19200},
-        {B38400, 38400},
-#ifdef B57600
-	{B57600, 57600},
-#endif
-#ifdef B115200
-	{B115200, 115200},
-#endif
-#ifdef B230400
-  	{B230400, 230400},
-#endif
-#ifdef B460800
-	{B460800, 460800},
-#endif
-	{0, 0}
-};
-
-int termcmp(struct termios *a, struct termios *b) {
-	if (a->c_iflag != b->c_iflag || a->c_oflag != b->c_oflag ||
-	    a->c_cflag != b->c_cflag || a->c_lflag != b->c_lflag ||
-	    cfgetispeed(a) != cfgetispeed(b) || cfgetospeed(a) != cfgetospeed(b))
-		return 1;
-	return memcmp(a->c_cc, b->c_cc, sizeof(a->c_cc));
-}       
-
-int get_serial_speed(int fd) {
-	struct termios mode;
-	
-	if (!tcgetattr(fd, &mode)) {
-		int i;
-		speed_t speed;
-		
-		speed = cfgetospeed(&mode);
-		for (i = 0; speed_map[i].value != 0; i++)
-			if (speed_map[i].speed == speed)
-				return speed_map[i].value;
-	}
-	return 0;
-}
-
-int compare_termios_to_console(char *dev, int *speed) {
-	struct termios cmode, mode;
-	int fd, cfd;
-
-	cfd = open ("/dev/console", O_RDONLY);
-	tcgetattr(cfd, &cmode);
-	close(cfd);
-
-	fd = open(dev, O_RDONLY|O_NONBLOCK);
-	tcgetattr(fd, &mode);
-
-	if (!termcmp(&cmode, &mode)) {
-		*speed = get_serial_speed(fd);
-		close(fd);
-		return 1;
-	}
-	close(fd);
-	return 0;
-}
-
-char *serial_tty_name(int type) {
-	switch (type) {
-		case PORT_8250...PORT_MAX_8250:
-			return "ttyS";
-		case PORT_PMAC_ZILOG:
-			return "ttyPZ";
-		case PORT_MPSC:
-			return "ttyMM";
-		case PORT_CPM:
-			return "ttyCPM";
-		case PORT_MPC52xx:
-			return "ttyPSC";
-		case PORT_IMX:
-			return "ttymxc";
-		case PORT_OMAP:
-			return "ttyO";
-		default:
-			return NULL;
-	}
-}
-
-char *check_serial_console(int *speed) {
-	int fd;
-	char *ret = NULL, *device;
-	char twelve = 12;
-	struct serial_struct si, si2;
-	char *tty_name;
-
-	memset(&si, 0, sizeof(si));
-	memset(&si2, 0, sizeof(si));
-
-	fd = open("/dev/console", O_RDWR);
-	if (ioctl (fd, TIOCLINUX, &twelve) >= 0)
-		goto out;
-
-	if (ioctl(fd, TIOCGSERIAL, &si) < 0)
-		goto out;
-	close(fd);
-
-	tty_name = serial_tty_name(si.type);
-	if (!tty_name)
-		goto out;
-
-	asprintf(&device, "%s%d", tty_name, si.line);
-	fd = open(device, O_RDWR|O_NONBLOCK);
-	if (fd == -1)
-		goto out;
-
-	if (ioctl(fd, TIOCGSERIAL, &si2) < 0)
-		goto out;
-
-	if (memcmp(&si,&si2, sizeof(si)))
-		goto out;
-
-	*speed = get_serial_speed(fd);
-	ret = device;
-out:
-	close(fd);
-	return ret;
-}
-
-int emit_console_event(char *dev, int speed) {
-	char *args[] = { "initctl", "emit", "--no-wait", "fedora.serial-console-available", NULL, NULL, NULL };
-	
-	if (dev)
-		asprintf(&args[4],"DEV=%s",dev);
-	if (speed)
-		asprintf(&args[5],"SPEED=%d",speed);
-	execv("/sbin/initctl", args);
-	return 1;	
-}
-
-int main(int argc, char **argv) {
-	char *device;
-	int speed;
-	
-	if (argc < 2) {
-		printf("usage: console_check <device>\n");
-		exit(1);
-	}
-	chdir("/dev");
-	device = argv[1];
-	if (!strcmp(device, "console")) {
-		device = check_serial_console(&speed);
-		if (device)
-			return emit_console_event(device, speed);
-	} else if (compare_termios_to_console(device, &speed)) {
-		return emit_console_event(device, speed);
-	}
-	return 0;
-}
diff --git a/src/console_init.c b/src/console_init.c
deleted file mode 100644
index 446433d0..00000000
--- a/src/console_init.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (c) 2008-2009 Red Hat, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-
-#include <linux/kd.h>
-
-#include "shvar.h"
-
-static char *lang = NULL;
-static char *font = NULL;
-static char *acm = NULL;
-static char *unimap = NULL;
-static char *keymap = NULL;
-
-static int linux_console(int fd) {
-	unsigned char twelve = 12;
-
-	if (ioctl(fd, TIOCLINUX, &twelve) >= 0) 
-		return 1;
-	return 0;
-}
-
-static int configured_as_utf8() {
-        shvarFile *i18nfile = NULL;
-
-        if ((i18nfile = svNewFile("/etc/sysconfig/i18n")) == NULL)
-                return 1; /* assume UTF-8 */
-
-        lang = svGetValue(i18nfile, "LANG");
-        font = svGetValue(i18nfile, "SYSFONT");
-        acm = svGetValue(i18nfile, "SYSFONTACM");
-        unimap = svGetValue(i18nfile, "UNIMAP");
-        svCloseFile(i18nfile);
-        if (!lang)
-                return 1;
-        if (g_str_has_suffix(lang,".utf8") || g_str_has_suffix(lang,".UTF-8"))
-                return 1;
-	return 0;
-}
-
-static int read_keymap() {
-	shvarFile *keyboard = NULL;
-	char *tmp;
-	struct stat sb;
-	
-	if (!stat("/etc/sysconfig/console/default.kmap",&sb)) {
-		keymap = "/etc/sysconfig/console/default.kmap";
-		return 0;
-	}
-
-	if ((keyboard = svNewFile("/etc/sysconfig/keyboard")) == NULL)
-		return 0;
-
-	tmp = svGetValue(keyboard, "KEYMAP");
-	if (tmp)
-		keymap = tmp;
-	tmp = svGetValue(keyboard, "KEYTABLE");
-	if (tmp) {
-		if (keymap) free(keymap);
-		asprintf(&keymap, "%s.map", tmp);
-	}
-	return 0;
-}
-
-static void set_font(char *device) {
-	int pid;
-	
-	if ( (pid = fork()) == 0) {
-		char *args[] = { "setfont", "latarcyrheb-sun16", "-C", NULL,
-				 NULL, NULL, NULL, NULL, NULL };
-
-		if (font)
-			args[1] = font;
-		args[3] = device;
-		if (acm) {
-			args[4] = "-m";	
-			args[5] = acm;
-			if (unimap) {
-				args[6] = "-u";
-				args[7] = unimap;
-			}
-		} else 	if (unimap) {
-			args[4] = "-u";
-			args[5] = unimap;
-		}
-		execv("/bin/setfont", args);
-		exit(1);
-	}
-}
-
-static void set_keyboard(int fd, int utf8) {
-	if (ioctl(fd, KDSKBMODE, utf8 ? K_UNICODE : K_XLATE))
-		perror("could not set keyboard mode");
-}
-
-static void set_terminal(int fd, int utf8) {
-	if (utf8)
-		write(fd, "\033%G", 3);
-	else
-		write(fd, "\033%@", 3);
-}
-
-static void set_keymap(int fd, int utf8) {
-	int pid;
-	
-	if ((pid = fork()) == 0) {
-		char *args[] = { "loadkeys", "-q", NULL, NULL, NULL };
-		dup2(fd, 0);
-		dup2(fd, 1);
-		
-		if (utf8) {
-			args[2] = "-u";
-			args[3] = keymap;
-		} else {
-			args[2] = keymap;
-		}
-		execv("/bin/loadkeys", args);
-		exit(1);
-	}
-}
-
-int main(int argc, char **argv) {
-	char *device;
-	int dev;
-
-	if (argc < 2) {
-		printf("usage: console_init <device>\n");
-		exit(1);
-	}
-	chdir("/dev");
-	device = argv[1];
-	dev = open(device, O_RDWR);
-	if (linux_console(dev)) {
-		int utf8 = configured_as_utf8();
-
-		set_keyboard(dev, utf8);
-		set_terminal(dev, utf8);
-		set_font(device);
-		read_keymap();
-		if (keymap)
-			set_keymap(dev,utf8);
-	}
-	return 0;
-}
diff --git a/src/securetty.8 b/src/securetty.8
deleted file mode 100644
index 2aad6bca..00000000
--- a/src/securetty.8
+++ /dev/null
@@ -1,15 +0,0 @@
-.\" Copyright 2009 Petr Lautrbach (plautrba@redhat.com)
-.TH securetty 8  2009-10-27 "" "System Administration tools and Daemons"
-.SH NAME
-securetty \- add a tty to /etc/securetty
-.SH SYNOPSIS
-.B securetty \fItty\fP
-.SH DESCRIPTION
-.B securetty
-safely adds \fItty\fP to /etc/securetty.
-.SH NOTES
-.B securetty
-is not normally meant to be run by hand; it is invoked by the upstart job that
-sets up the system serial console.
-.SH "SEE ALSO"
-.BR securetty(5)
diff --git a/src/securetty.c b/src/securetty.c
deleted file mode 100644
index 59abb6e9..00000000
--- a/src/securetty.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Copyright (c) 2008 Red Hat, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <unistd.h>
-
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-void alarm_handler(int num) {
-        return;
-}
-
-int open_and_lock_securetty() {
-        int fd;
-        struct flock lock;
-        struct sigaction act, oldact;
-        
-        lock.l_type = F_WRLCK;
-        lock.l_whence = SEEK_SET;
-        lock.l_start = 0;
-        lock.l_len = 0;
-      
-        fd = open("/etc/securetty", O_RDWR);
-        if (fd == -1) {
-                syslog(LOG_ERR, "Couldn't open /etc/securetty: %s",strerror(errno));
-                return -1;
-        }
-        act.sa_handler = alarm_handler;
-        act.sa_flags = 0;
-        sigaction(SIGALRM, &act, &oldact);
-        alarm(2);
-        while (fcntl(fd, F_SETLKW, &lock) == -1) {
-                if (errno == EINTR) {
-                        syslog(LOG_ERR, "Couldn't lock /etc/securetty: Timeout exceeded");
-                } else {
-                        syslog(LOG_ERR, "Couldn't lock /etc/securetty: %s",strerror(errno));
-                }
-                return -1;
-        }
-        alarm(0);
-        sigaction(SIGALRM, &oldact, NULL);
-        return fd;
-}
-
-int rewrite_securetty(char *terminal) {
-        int fd;
-        
-        fd = open_and_lock_securetty();
-        if (fd == -1)
-                return 1;
-        if (lseek(fd, 0, SEEK_END) == -1) {
-                close(fd);
-                syslog(LOG_ERR, "Couldn't seek to end of /etc/securetty: %s",strerror(errno));
-                return 1;
-        }
-        write(fd, terminal, strlen(terminal));
-        write(fd, "\n", 1);
-        close(fd);
-        return 0;
-}
-
-int check_securetty(char *terminal) {
-        int fd, rc = 1;
-        char *buf, term[PATH_MAX];
-        struct stat sb;
-
-        fd = open("/etc/securetty", O_RDONLY);
-        if (fd == -1)
-                goto out;
-        fstat(fd, &sb);
-        buf = mmap(NULL, sb.st_size, PROT_READ, MAP_SHARED, fd, 0);
-        if (buf == ((caddr_t) -1)) {
-                close(fd);
-                return 1;
-        }
-        snprintf(term,PATH_MAX,"%s\n",terminal);
-        if (!strncmp(buf,term,strlen(term))) {
-                rc = 0;
-                goto out_unmap;
-        }
-        snprintf(term,PATH_MAX,"\n%s\n",terminal);
-        if (strstr(buf,term)) {
-                rc = 0;
-                goto out_unmap;
-        }
-out_unmap:
-        munmap(buf, sb.st_size);
-out:
-        close(fd);
-        return rc;
-}
-
-int main(int argc, char **argv) {
-        if (argc < 2 ) {
-                fprintf(stderr, "Usage: securetty <device>\n");
-                exit(1);
-        }
-        openlog("securetty", LOG_CONS, LOG_DAEMON);
-        if (check_securetty(argv[1]))
-                return rewrite_securetty(argv[1]);
-        else
-                return 0;
-}
diff --git a/udev/rules.d/10-console.rules b/udev/rules.d/10-console.rules
deleted file mode 100644
index e7609c57..00000000
--- a/udev/rules.d/10-console.rules
+++ /dev/null
@@ -1,15 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION!="add", GOTO="console_end"
-
-# Console initialization - keyboard, font, etc.
-KERNEL=="tty0",		RUN+="/lib/udev/console_init %k"
-
-# Check and set up serial and serial-like consoles if necessary
-KERNEL=="console",	RUN+="/lib/udev/console_check %k"
-KERNEL=="ttySG*",	RUN+="/lib/udev/console_check %k"
-KERNEL=="xvc*",		RUN+="/lib/udev/console_check %k"
-KERNEL=="hvsi*",	RUN+="/lib/udev/console_check %k"
-KERNEL=="hvc*",		RUN+="/lib/udev/console_check %k"
-
-LABEL="console_end"