diff options
| author | David Kaspar [Dee'Kej] <dkaspar@redhat.com> | 2018-05-25 20:01:54 +0200 |
|---|---|---|
| committer | Dee'Kej <deekej@linuxmail.org> | 2018-05-30 12:32:22 +0200 |
| commit | a145ddda284570e57413e37f025c3657205e17d8 (patch) | |
| tree | a371338da02e38d8745964f75239c8ee62cc459b /sysconfig/network-scripts | |
| parent | db1ca2fadd20d0a4fb5a0fe18adcd8c960db9cf3 (diff) | |
| download | initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.gz initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.bz2 initscripts-a145ddda284570e57413e37f025c3657205e17d8.tar.xz initscripts-a145ddda284570e57413e37f025c3657205e17d8.zip | |
Repository scheme updated to new layout
NOTE: This commit just moves files around, without actually fixing the
Makefiles and specfile. See follow up commits which resolve this.
Diffstat (limited to 'sysconfig/network-scripts')
27 files changed, 0 insertions, 4971 deletions
diff --git a/sysconfig/network-scripts/ifcfg-lo b/sysconfig/network-scripts/ifcfg-lo deleted file mode 100644 index cb4f3f94..00000000 --- a/sysconfig/network-scripts/ifcfg-lo +++ /dev/null @@ -1,9 +0,0 @@ -DEVICE=lo -IPADDR=127.0.0.1 -NETMASK=255.0.0.0 -NETWORK=127.0.0.0 -# If you're having problems with gated making 127.0.0.0/8 a martian, -# you can change this to something else (255.255.255.255, for example) -BROADCAST=127.255.255.255 -ONBOOT=yes -NAME=loopback diff --git a/sysconfig/network-scripts/ifdown b/sysconfig/network-scripts/ifdown deleted file mode 100755 index 18cee69d..00000000 --- a/sysconfig/network-scripts/ifdown +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash - -unset WINDOW # defined by screen, conflicts with our usage - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=$1 - -[ -z "$CONFIG" ] && { - echo $"usage: ifdown <configuration>" >&2 - exit 1 -} - -need_config "${CONFIG}" - -[ -f "$CONFIG" ] || { - echo $"usage: ifdown <configuration>" >&2 - exit 1 -} - -if [ $UID != 0 ]; then - if [ -x /usr/sbin/usernetctl ]; then - source_config - if /usr/sbin/usernetctl ${CONFIG} report ; then - exec /usr/sbin/usernetctl ${CONFIG} down - fi - fi - echo $"Users cannot control this device." >&2 - exit 1 -fi - -source_config - -if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ] -then - exit 0 -fi - -if [ "$_use_nm" = "true" ]; then - if [ -n "$UUID" -a -z "$DEVICE" ]; then - DEVICE=$(nmcli -t --fields uuid,device con show --active | awk -F ':' "\$1 == \"$UUID\" { print \$2 }") - fi - if [ -n "$DEVICE" ] && ! is_nm_device_unmanaged "$DEVICE" ; then - if ! LC_ALL=C nmcli -t -f STATE,DEVICE dev status | grep -Eq "^(failed|disconnected|unmanaged|unavailable):$DEVICE$"; then - nmcli dev disconnect "$DEVICE" - exit $? - fi - exit 0 - fi -fi - -if [ -x /sbin/ifdown-pre-local ]; then - /sbin/ifdown-pre-local ${DEVICE} -fi - -OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${DEVICETYPE}" - -if [ ! -x ${OTHERSCRIPT} ]; then - OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-${TYPE}" -fi - -if [ ! -x ${OTHERSCRIPT} ]; then - OTHERSCRIPT="/etc/sysconfig/network-scripts/ifdown-eth" -fi - -exec ${OTHERSCRIPT} ${CONFIG} $2 diff --git a/sysconfig/network-scripts/ifdown-bnep b/sysconfig/network-scripts/ifdown-bnep deleted file mode 100755 index 9b2d385d..00000000 --- a/sysconfig/network-scripts/ifdown-bnep +++ /dev/null @@ -1,49 +0,0 @@ -#! /bin/bash - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=${1} - -source_config - -# On hotplug events, just bring the virtual device up as if it's normal Ethernet -if [ -n "$IN_HOTPLUG" ]; then - exec /etc/sysconfig/network-scripts/ifdown-eth ${CONFIG} $2 -fi - -stop_panu() -{ - kill -TERM $(cat /run/pand-${DEVICE}.pid) -} - -stop_nap() -{ - kill -TERM $(cat /run/pand-${DEVICE}.pid) - /usr/bin/pand -K -} - -stop_gn() -{ - : -} - -case "$ROLE" in -PANU) - stop_panu - ;; -NAP) - stop_nap - ;; -GN) - stop_gn - ;; -*) - echo Unknown BNEP mode :$ROLE - ;; -esac - diff --git a/sysconfig/network-scripts/ifdown-eth b/sysconfig/network-scripts/ifdown-eth deleted file mode 100755 index 97b17aaf..00000000 --- a/sysconfig/network-scripts/ifdown-eth +++ /dev/null @@ -1,184 +0,0 @@ -#!/bin/bash -# Network Interface Configuration System -# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=${1} - -source_config - -. /etc/sysconfig/network - -# Check to make sure the device is actually up -check_device_down ${DEVICE} && [ "$BOOTPROTO" != "dhcp" -a "$BOOTPROTO" != "bootp" ] && [ -n "$VLAN" -a "$VLAN" != "yes" ] && exit 0 - -if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifdown-TeamPort ]; then - ./ifdown-TeamPort ${CONFIG} $2 -fi - -if [ "${SLAVE}" != "yes" -o -z "${MASTER}" ]; then - if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then - FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) - if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then - NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR}) - if [ -n "${NEWCONFIG}" ]; then - eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG) - else - net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." - exit 1 - fi - if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then - exec /sbin/ifdown ${NEWCONFIG} - else - net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." - exit 1 - fi - fi - fi -fi - -if is_bonding_device ${DEVICE} ; then - for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do - is_ignored_file "$device" && continue - /sbin/ifdown ${device##*/} - done - for arg in $BONDING_OPTS ; do - key=${arg%%=*}; - [[ "${key}" != "arp_ip_target" ]] && continue - value=${arg##*=}; - if [ "${value:0:1}" != "" ]; then - OLDIFS=$IFS; - IFS=','; - for arp_ip in $value; do - if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then - echo "-$arp_ip" > /sys/class/net/${DEVICE}/bonding/arp_ip_target - fi - done - IFS=$OLDIFS; - else - value=${value#+}; - if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then - echo "-$value" > /sys/class/net/${DEVICE}/bonding/arp_ip_target - fi - fi - done -fi - -/etc/sysconfig/network-scripts/ifdown-ipv6 ${CONFIG} - -retcode=0 - -for VER in "" 6 ; do - if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then - dhcpid=$(cat /run/dhclient$VER-${DEVICE}.pid) - generate_lease_file_name $VER - if is_true "$DHCPRELEASE"; then - /sbin/dhclient -r -lf ${LEASEFILE} -pf /run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1 - retcode=$? - else - kill $dhcpid >/dev/null 2>&1 - retcode=$? - reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script - fi - if [ -f "/run/dhclient$VER-${DEVICE}.pid" ]; then - rm -f /run/dhclient$VER-${DEVICE}.pid - kill $dhcpid >/dev/null 2>&1 - fi - fi -done - -# we can't just delete the configured address because that address -# may have been changed in the config file since the device was -# brought up. Flush all addresses associated with this -# instance instead. -if [ -d "/sys/class/net/${REALDEVICE}" ]; then - LABEL= - if [ "${REALDEVICE}" != "${DEVICE}" ]; then - LABEL="label ${DEVICE}" - fi - if [ "${REALDEVICE}" = "lo" ]; then - TIMEOUT="" - [ -x /usr/bin/timeout ] && TIMEOUT="/usr/bin/timeout --signal=SIGQUIT 4" - $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null - $TIMEOUT ip addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null - else - ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null - ip -4 addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null - fi - - if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then - echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null - fi - - if [ "${REALDEVICE}" = "${DEVICE}" ]; then - ip link set dev ${DEVICE} down 2>/dev/null - fi -fi -[ "$retcode" = "0" ] && retcode=$? - -if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then - /sbin/ip link set dev ${DEVICE} down - /usr/sbin/brctl delif -- ${BRIDGE} ${DEVICE} - # Upon removing a device from a bridge, - # it's necessary to make radvd reload its config - [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid) - if [ -d /sys/class/net/${BRIDGE}/brif ] && [ $(ls -1 /sys/class/net/${BRIDGE}/brif | wc -l) -eq 0 ]; then - /usr/sbin/brctl delbr -- ${BRIDGE} - fi -fi - -if [ "${TYPE}" = "Tap" ]; then - TUNMODE="mode tap" - [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" - ip tuntap del ${TUNMODE} dev ${DEVICE} >/dev/null -fi - -if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifdown-Team ]; then - ./ifdown-Team ${CONFIG} $2 -fi - -# wait up to 5 seconds for device to actually come down... -waited=0 -while ! check_device_down ${DEVICE} && [ "$waited" -lt 50 ] ; do - sleep 0.01 - waited=$(($waited+1)) -done - -# don't leave an outdated key sitting around -if [ -n "${WIRELESS_ENC_KEY}" ] && [ -x /sbin/iwconfig ]; then - /sbin/iwconfig ${DEVICE} enc 0 >/dev/null 2>&1 -fi - -if [ "$retcode" = 0 ] ; then - /etc/sysconfig/network-scripts/ifdown-post $CONFIG - # do NOT use $? because ifdown should return whether or not - # the interface went down. -fi - -if [ -n "$VLAN" ]; then - # 802.1q VLAN - if [ -f /proc/net/vlan/${DEVICE} ]; then - ip link delete ${DEVICE} type vlan - fi -fi - -exit $retcode diff --git a/sysconfig/network-scripts/ifdown-ippp b/sysconfig/network-scripts/ifdown-ippp deleted file mode 100755 index ed203997..00000000 --- a/sysconfig/network-scripts/ifdown-ippp +++ /dev/null @@ -1,34 +0,0 @@ -#! /bin/sh - -PATH=/sbin:/usr/sbin:/bin:/usr/bin - -# Get global network configuration -[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network - -CONFIG=$1 - -. ./$CONFIG - -# stopping ibod daemon for channel bundling -if [ -f /var/lock/subsys/ibod ] ; then - kill -9 $(pidof ibod) >/dev/null 2>&1 - rm -f /var/lock/subsys/ibod -fi - -# Shut down IPv6 -/etc/sysconfig/network-scripts/ifdown-ipv6 $CONFIG - -# shutdown isdn device -isdnctrl hangup $DEVICE >/dev/null 2>&1 -sleep 1 -ip link set dev $DEVICE down >/dev/null 2>&1 - -# delete isdn device -isdnctrl delif $DEVICE >/dev/null 2>&1 - -# kill ipppd daemon -if [ -f /run/ipppd.$DEVICE.pid ] ; then - pppdpid=$(cat /run/ipppd.$DEVICE.pid) - kill -9 $pppdpid > /dev/null 2>&1 - rm -f /run/ipppd.$DEVICE.pid > /dev/null 2>&1 -fi diff --git a/sysconfig/network-scripts/ifdown-ipv6 b/sysconfig/network-scripts/ifdown-ipv6 deleted file mode 100755 index 7ba3efdc..00000000 --- a/sysconfig/network-scripts/ifdown-ipv6 +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# -# ifdown-ipv6 -# -# -# Taken from: -# (P) & (C) 2000-2004 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# RHL integration assistance by Pekka Savola <pekkas@netcore.fi> -# -# Version 2005-09-22 -# -# Note: if called as (like normally) by /etc/sysconfig/network-scripts/ifdown -# exit codes aren't handled by "ifdown" -# -# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1: -# DEVICE=<device> -# IPV6INIT=yes|no: controls IPv6 configuration for this interface -# -# Optional for 6to4 tunneling: -# IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay [default: 192.88.99.1] -# IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup internal interfaces -# -# Optional for 6to4 tunneling links to trigger radvd: -# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering [optional] -# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" [optional] -# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP] -# -# Required version of radvd to use 6to4 prefix recalculation -# 0.6.2p3 or newer supporting option "Base6to4Interface" -# Required version of radvd to use dynamic ppp links -# 0.7.0 + fixes or newer -# - - -. /etc/sysconfig/network - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG -source_config - -REALDEVICE=${DEVICE%%:*} -DEVICE=$REALDEVICE - -[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 -. /etc/sysconfig/network-scripts/network-functions-ipv6 - - -# IPv6 test, no module loaded, exit if system is not IPv6-ready -ipv6_test testonly || exit 0 - -# Test device status -ipv6_test_device_status $DEVICE -if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 1 -fi - -if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then - # Switch some sysctls to secure mode - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 -fi -/sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1 - -# Test status of tun6to4 device -ipv6_test_device_status tun6to4 -if [ $? = 0 -o $? = 11 ]; then - # Device exists - valid6to4config="yes" - - if [ -z "$IPV6TO4_RELAY" ]; then - IPV6TO4_RELAY="192.88.99.1" - fi - - # Get IPv4 address from interface - if [ -n "$IPV6TO4_IPV4ADDR" ]; then - # Take special configured from config file (precedence 1) - ipv4addr="$IPV6TO4_IPV4ADDR" - - # Get IPv4 address from interface first - ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addrlocal" ]; then - # Take configured from config file - ipv4addrlocal="$IPADDR" - fi - else - # Get IPv4 address from interface first (has precedence 2) - ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addr" ]; then - # Take configured from config file (precedence 3) - ipv4addr="$IPADDR" - fi - ipv4addrlocal="$ipv4addr" - fi - - # Get local IPv4 address of dedicated tunnel - ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)" - - if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then - # no IPv4 addresses given, 6to4 sure not configured - valid6to4config="no" - else - # Check against configured 6to4 tunnel to see if this interface was - # used before - if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then - # IPv4 address of interface does't match local tunnel address, - # interface was not used for current 6to4 setup - valid6to4config="no" - fi - fi -fi - -# Shutdown of 6to4, if configured -if [ "$valid6to4config" = "yes" ]; then - if [ -n "$IPV6TO4_ROUTING" ]; then - # Delete routes to local networks - for devsuf in $IPV6TO4_ROUTING; do - dev="${devsuf%%-*}" - ipv6_cleanup_6to4_device $dev - done - fi - - # Delete all configured 6to4 address - ipv6_cleanup_6to4_tunnels tun6to4 - - # Control running radvd - ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE -fi - -# Delete all current configured IPv6 addresses on this interface -ipv6_cleanup_device $DEVICE diff --git a/sysconfig/network-scripts/ifdown-post b/sysconfig/network-scripts/ifdown-post deleted file mode 100755 index 9db16ad3..00000000 --- a/sysconfig/network-scripts/ifdown-post +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh -# This should be called whenever an interface goes down, not just when -# it is brought down explicitly. - -cd /etc/sysconfig/network-scripts -. ./network-functions - -unset REALDEVICE -if [ "$1" = --realdevice ] ; then - REALDEVICE=$2 - shift 2 -fi - -CONFIG=$1 -source_config - -[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE - -/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} ${DEVNAME} - -# Remove duplicate DNS entries and shift them, -# to have always correct condition below... -update_DNS_entries - -if ! is_false "${PEERDNS}" || is_true "${RESOLV_MODS}" && \ - [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" -o -n "${DNS1}" \ - -o "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ] ; then - if [ -f /etc/resolv.conf.save ]; then - change_resolv_conf /etc/resolv.conf.save - rm -f /etc/resolv.conf.save - fi - if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then - if [ -f /etc/ppp/peers/$DEVICE ] ; then - rm -f /etc/ppp/peers/$DEVICE - fi - fi -fi - -# Reset the default route if this interface had a special one -if ! check_default_route ; then - # ISDN device needs special handling dial on demand - if [ "${DEVICETYPE}" = "ippp" -o "${DEVICETYPE}" = "isdn" ] && \ - [ "$DIALMODE" = "auto" ] ; then - if [ -z "$GATEWAY" ] ; then - /sbin/ip route add default ${METRIC:+metric} \ - ${WINDOW:+window $WINDOW} dev ${DEVICE} - else - /sbin/ip route add default ${METRIC:+metric} \ - ${WINDOW:+window $WINDOW} via ${GATEWAY} - fi - else - add_default_route ${DEVICE} - fi -fi - -# Reset firewall ZONE to "default": -if [ "${REALDEVICE}" != "lo" ]; then - dbus-send --system --dest=org.fedoraproject.FirewallD1 \ - /org/fedoraproject/FirewallD1 \ - org.fedoraproject.FirewallD1.zone.removeInterface \ - string: "" string:"${DEVICE}" \ - > /dev/null 2>&1 -fi - -# Notify programs that have requested notification -do_netreport - -if [ -x /sbin/ifdown-local ]; then - /sbin/ifdown-local ${DEVICE} -fi - -exit 0 diff --git a/sysconfig/network-scripts/ifdown-routes b/sysconfig/network-scripts/ifdown-routes deleted file mode 100755 index 1d1549dc..00000000 --- a/sysconfig/network-scripts/ifdown-routes +++ /dev/null @@ -1,33 +0,0 @@ -#! /bin/bash -# -# Drops static routes which go through device $1 - -if [ -z "$1" ]; then - echo $"usage: ifdown-routes <net-device> [<nickname>]" - exit 1 -fi - -# The routes are actually dropped just by setting the link down, so nothing -# needs to be done - -MATCH='^[[:space:]]*(\#.*)?$' - -# Routing rules -FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1" -if [ -n "$2" -a "$2" != "$1" ]; then - FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2" -fi - -for file in $FILES; do - if [ -f "$file" ]; then - proto= - if [ "$file" != "${file##*/rule6-}" ]; then - proto="-6" - fi - { cat "$file" ; echo ; } | while read line; do - if [[ ! "$line" =~ $MATCH ]]; then - /sbin/ip $proto rule del $line - fi - done - fi -done diff --git a/sysconfig/network-scripts/ifdown-sit b/sysconfig/network-scripts/ifdown-sit deleted file mode 100755 index 4a9335a5..00000000 --- a/sysconfig/network-scripts/ifdown-sit +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/bash -# -# ifdown-sit -# -# -# Taken from: -# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# RHL integration assistance by Pekka Savola <pekkas@netcore.fi> -# -# Version 2002-11-01 -# -# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1: -# DEVICE=<device> -# - - -. /etc/sysconfig/network - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG -source_config - -# IPv6 don't need aliases anymore, config is skipped -REALDEVICE=${DEVICE%%:*} -[ "$DEVICE" != "$REALDEVICE" ] && exit 0 - -[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 -. /etc/sysconfig/network-scripts/network-functions-ipv6 - - -# Generic tunnel device sit0 is not supported here -if [ "$DEVICE" = "sit0" ]; then - net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" - exit 1 -fi - -# IPv6 test, no module loaded, exit if system is not IPv6-ready -ipv6_test testonly || exit 0 - -# Test device status -ipv6_test_device_status $DEVICE -if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 0 -fi - -# Cleanup additional static routes -/etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} - -# Cleanup and shut down IPv6-in-IPv4 tunnel device -ipv6_del_tunnel_device $DEVICE diff --git a/sysconfig/network-scripts/ifdown-tunnel b/sysconfig/network-scripts/ifdown-tunnel deleted file mode 100755 index a5384b18..00000000 --- a/sysconfig/network-scripts/ifdown-tunnel +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/bash -# Copyright (C) 1996-2006 Red Hat, Inc. all rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Thanks to: -# - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro> -# - Aaron Hope <aaron.hope@unh.edu> -# - Sean Millichamp <sean@enertronllc.com> -# for providing the scripts this one is based on - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=$1 -need_config "$CONFIG" -source_config - -# Generic tunnel devices are not supported here -if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then - net_log $"Device '$DEVICE' isn't supported as a valid GRE device name." - exit 1 -fi - -check_device_down "$DEVICE" && exit 0 - -/sbin/ip link set dev "$DEVICE" down -/sbin/ip tunnel del "$DEVICE" - -exec /etc/sysconfig/network-scripts/ifdown-post "$CONFIG" diff --git a/sysconfig/network-scripts/ifup b/sysconfig/network-scripts/ifup deleted file mode 100755 index d25db5af..00000000 --- a/sysconfig/network-scripts/ifup +++ /dev/null @@ -1,164 +0,0 @@ -#!/bin/bash -# Network Interface Configuration System -# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -unset WINDOW # defined by screen, conflicts with our usage - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=${1} - -[ -z "${CONFIG}" ] && { - echo $"Usage: ifup <configuration>" >&2 - exit 1 -} - -need_config "${CONFIG}" - -[ -f "${CONFIG}" ] || { - echo $"$0: configuration for ${1} not found." >&2 - echo $"Usage: ifup <configuration>" >&2 - exit 1 -} - -if [ ${UID} != 0 ]; then - if [ -x /usr/sbin/usernetctl ]; then - source_config - if /usr/sbin/usernetctl ${CONFIG} report ; then - exec /usr/sbin/usernetctl ${CONFIG} up - fi - fi - echo $"Users cannot control this device." >&2 - exit 1 -fi - -source_config - -if [ "foo$2" = "fooboot" ] && [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ] -then - exit 0 -fi -if [ -n "$IN_HOTPLUG" ] && [ "${HOTPLUG}" = "no" -o "${HOTPLUG}" = "NO" ] -then - exit 0 -fi -if [ -n "$IN_HOTPLUG" -a "${TYPE}" = "Bridge" ]; -then - exit 0 -fi - -if [ "$_use_nm" = "true" -a -n "$UUID" -a "$REALDEVICE" != "lo" ]; then - if [ "foo$2" = "fooboot" ] && [ "${TYPE}" = "Wireless" ]; then - exit 0 - fi - [ -n "${DEVICE}" ] && is_nm_handling ${DEVICE} && exit 0 - nmcli con up uuid "$UUID" - exit $? -fi - -# Ethernet 802.1Q VLAN support -if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ] && [ -n "$DEVICE" ]; then - if [ -n "${VID}" ]; then - if test -z "$PHYSDEV"; then - net_log $"PHYSDEV should be set for device ${DEVICE}" - exit 1 - fi - else - VID="" - MATCH='^.+\.[0-9]{1,4}$' - if [[ "${DEVICE}" =~ $MATCH ]]; then - VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^.*\.\([0-9]\+\)/\1/') - PHYSDEV=${DEVICE%.*} - fi - MATCH='^vlan[0-9]{1,4}?' - if [[ "${DEVICE}" =~ $MATCH ]]; then - VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//') - # PHYSDEV should be set in ifcfg-vlan* file - if test -z "$PHYSDEV"; then - net_log $"PHYSDEV should be set for device ${DEVICE}" - exit 1 - fi - fi - fi - if [ -n "$VID" ]; then - if [ ! -d /proc/net/vlan ]; then - if ! modprobe 8021q >/dev/null 2>&1 ; then - net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}" - exit 1 - fi - fi - - is_available_wait ${PHYSDEV} ${DEVTIMEOUT} || { - if [ "$?" = "1" ] ; then - net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." - exit 1 - else - exit 0 - fi - } - - # Link on Physical device needs to be up but no ip required - check_device_down ${PHYSDEV} && { ip -o link set dev ${PHYSDEV} up; } - - if [ ! -f /proc/net/vlan/${DEVICE} ]; then - if [ "${REORDER_HDR}" = "no" -o "${REORDER_HDR}" = "0" ]; then - FLAG_REORDER_HDR="reorder_hdr off" - fi - - if [ "${GVRP}" = "yes" -o "${GVRP}" = "1" ]; then - FLAG_GVRP="gvrp on" - fi - - ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || { - (/usr/bin/logger -p daemon.info -t ifup \ - $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &) & - net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" - exit 1 - } - - [ -n "${VLAN_EGRESS_PRIORITY_MAP}" ] && ip link set ${DEVICE} type vlan egress ${VLAN_EGRESS_PRIORITY_MAP} - fi - fi - - /usr/lib/systemd/systemd-sysctl \ - --prefix "/proc/sys/net/ipv4/conf/${DEVICE}" \ - --prefix "/proc/sys/net/ipv6/conf/${DEVICE}" -fi - -if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then - DYNCONFIG=true -fi - -if [ -x /sbin/ifup-pre-local ]; then - /sbin/ifup-pre-local ${CONFIG} $2 -fi - -OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${DEVICETYPE}" - -if [ ! -x ${OTHERSCRIPT} ]; then - OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${TYPE}" -fi - -if [ ! -x ${OTHERSCRIPT} ]; then - OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-eth" -fi - -exec ${OTHERSCRIPT} ${CONFIG} $2 diff --git a/sysconfig/network-scripts/ifup-aliases b/sysconfig/network-scripts/ifup-aliases deleted file mode 100755 index 52d43ea8..00000000 --- a/sysconfig/network-scripts/ifup-aliases +++ /dev/null @@ -1,381 +0,0 @@ -#!/bin/bash - -# -# configures aliases of device $1 -# -# This script goes out of its way to arrive at the configuration of ip -# aliases described in the ifcfg-$DEV:* and ifcfg-$DEV-range* files from -# whatever existing configuration it may be given: existing aliases not -# specified in the configuration will be removed, netmasks and broadcast -# addrs will be updated on existing aliases, and new aliases will be setup. -# -# range specification files: -# -# One can specify ranges of alised ipaddress using ifcfg-$DEV-range* files. -# Specify multiple ranges using multiple files, such as ifcfg-eth0-range0 and -# ifcfg-eth0-range1, etc. In these files, the following configuration variables -# specify the range: -# -# IPADDR_START -- ipaddr to start range at. eg "192.168.30.1" -# IPADDR_END -- ipaddr to end range at. eg "192.168.30.254" -# CLONENUM_START -- interface clone number to start using for this range. eg "0" -# -# The above example values create the interfaces eth0:0 through eth0:253 using -# ipaddrs 192.168.30.1 through 192.168.30.254, inclusive. -# -# Other configuration variables such as NETMASK and BROADCAST may be specified -# in the range file and will apply to all of the ipaddresses in the range. Range -# files also inherit configuration from the ifcfg-$DEV file just like normal. -# -# Note that IPADDR_START and IPADR_END are required to be in the same class-c -# block. I.e. IPADDR_START=192.168.30.1 and IPADDR_END=192.168.31.255 is -# not valid. -# -# speed with large sets of interfaces: -# -# Considerable effort was spent making this script fast. It can efficiently -# handle a thousand ip aliases on one interface. -# -# With large sets of ipaddresses the NO_ALIASROUTING=yes configuration is -# highly recommended. (This can be specified in ifcfg-$DEV and inherited.) This -# prevents this script from setting up routing details for the virtual -# interfaces, which I don't think is needed, because outgoing traffic can use the -# main interface. However, make your own conclusions on what you need. -# -# My test setup of four class C address blocks on a P166 took 25 seconds of -# which 16 seconds of this was spent in the ifcconfig calls. Without the -# NO_ALIASROUTING=yes config an additional 12 seconds is spent in route calls. -# -# notes on internals: -# -# This script uses the bash "eval" command to lookup shell variables with names -# which are generated from other shell variables. This allows us to, in effect, -# create hashes using the shell variable namesspace by just including the hash -# key in the name of the variable. -# -# This script originally written by: David Harris <dharris@drh.net> -# Principal Engineer, DRH Internet -# June 30, 1999 -# -# modified by: Bill Nottingham <notting@redhat.com> - -TEXTDOMAIN=initscripts -TEXTDOMAINDIR=/etc/locale - -device=$1 -if [ "$device" = "" ]; then - echo $"usage: ifup-aliases <net-device> [<parent-config>]\n" - exit 1 -fi - -PARENTCONFIG=${2:-ifcfg-$device} -parent_device=$device - -cd /etc/sysconfig/network-scripts -. ./network-functions - -# Grab the current configuration of any running aliases, place device info -# into variables of the form: -# rdev_<index>_addr = <ip address> -# rdev_<index>_pb = <prefix>_<broadcast> -# rdevip_<ipaddress> = <index> -# Example: -# rdev_0_addr=192.168.1.1 -# rdev_0_pb=24_192.16.1.255 -# rdevip_192_168_1_1=0 -# -# A list of all the devices is created in rdev_LIST. - -eval $( ip addr show $device label $device:* | \ - awk 'BEGIN { COUNT=0;LAST_DEV="" } /inet / { - # Split IP address into address/prefix - split($2,IPADDR,"/"); - # Create A_B_C_D IP address form - IP_ADDR=IPADDR[1]; - gsub(/\./,"_",IP_ADDR); - # Split device into device:index - split($NF,DEV,":"); - # Update last device - LAST_DEV=LAST_DEV " " DEV[2]; - printf("rdev_%s_addr=%s\nrdevip_%s=%s\nrdev_%s_pb=%s_%s\nrdev_LIST=\"%s\"\n", - DEV[2],IPADDR[1],IP_ADDR,DEV[2],DEV[2],IPADDR[2],$4,LAST_DEV); - } END { - if(LAST_DEV == "") print "no_devices_are_up=yes" - }' ); - -# -# Store configuration of the parent device and network -# - -# read from the /etc/sysconfig/network -eval ` ( - . /etc/sysconfig/network; - echo network_GATEWAY=$GATEWAY\;; - echo network_GATEWAYDEV=$GATEWAYDEV\;; -) ` - -# read defaults from the parent config file -[ -f $PARENTCONFIG ] || { - net_log $"Missing config file $PARENTCONFIG." - exit 1 -} -eval ` ( - . ./$PARENTCONFIG; - echo default_PREFIX=$PREFIX\;; - echo default_NETMASK=$NETMASK\;; - echo default_BROADCAST=$BROADCAST\;; - echo default_GATEWAY=$GATEWAY\;; - echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;; - echo default_ARPCHECK=$ARPCHECK\;; - echo default_ARPUPDATE=$ARPUPDATE\;; -) ` -[ -z "$default_GATEWAY" ] && default_GATEWAY=$network_GATEWAY - -function ini_env () -{ - DEVICE="" - IPADDR="" - IPV6ADDR="" - PREFIX=$default_PREFIX - NETMASK=$default_NETMASK - BROADCAST=$default_BROADCAST - GATEWAY=$default_GATEWAY - NO_ALIASROUTING=$default_NO_ALIASROUTING - ONPARENT="" - ARPCHECK=$default_ARPCHECK - ARPUPDATE=$default_ARPUPDATE -} - -function is_default_gateway () -{ - LC_ALL=C /sbin/ip route ls default scope global \ - | awk '$3 == "'"$1"'" { found = 1; } END { exit found == 0; }' -} - -# -# Read the alias configuration files and enable each aliased -# device using new_interface() -# - -function new_interface () -{ - - ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.}; - IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}"; - DEVNUM=${DEVICE#*:} - - MATCH='^[0-9A-Za-z_]*$' - if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then - net_log $"error in $FILE: invalid alias number" - return 1 - fi - - eval " - ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM}; - ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE; - "; - - if [ -n "$ipseen" ]; then - net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" - return 1 - fi - - if [ -n "$devseen" ]; then - net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" - return 1 - fi - - if [ -z "$DEVICE" -o -z "$IPADDR" ]; then - if [ -n "$IPV6ADDR" -a -n "$DEVICE" ] && ! is_false "$IPV6INIT"; then - /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE} - return $? - fi - net_log $"error in $FILE: didn't specify device or ipaddr" - return 1 - fi - - if [ -z "$NETMASK" -a -z "$PREFIX" ]; then - net_log $"error iN $FILE: didn't specify netmask or prefix" - fi - - if [ -z "$PREFIX" ]; then - eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) - fi - - if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then - eval $(/bin/ipcalc --broadcast ${IPADDR}/${PREFIX}) - fi - - if [ "$no_devices_are_up" = "yes" ]; then - setup_this=yes - else - - setup_this="" - - eval " - rdev_addr=\$rdev_${DEVNUM}_addr; - rdev_pb=\$rdev_${DEVNUM}_pb; - rdev_mark=\$rdev_${DEVNUM}_mark; - rdevip=\$rdevip_${IPGLOP}; - "; - - if [ -n "$rdev_addr" ]; then - if [ "$rdev_addr" = "${IPADDR}" ]; then - newmark=keep - if [ "$rdev_pb" != "${PREFIX}_${BROADCAST}" ]; then - setup_this=freshen - else - setup_this=no - fi - else - if [ "$rdev_mark" != "remove" ]; then - /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} - do_netreport=yes - fi - newmark=remove - setup_this=yes - fi - if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then - net_log $"error in ifcfg-${parent_device}: files" - return 1 - fi - eval " rdev_${DEVNUM}_mark=\$newmark "; - else - setup_this=yes - fi - - if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then - eval " mark_remove=\$rdev_${rdevip}_mark "; - if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then - net_log $"error in ifcfg-${parent_device}: files" - return 1 - fi - if [ "$mark_remove" != "remove" ]; then - eval " rdev_${rdevip}_mark=remove "; - /sbin/ip addr flush dev $parent_device label $parent_device:$rdevip - do_netreport=yes - fi - fi - - fi - - if [ "$setup_this" = "freshen" ] ; then - # we can do the freshen stuff right now - /sbin/ip addr change ${IPADDR}/${PREFIX} brd ${BROADCAST} - fi - - if [ "$setup_this" = "yes" ] ; then - if [ "${parent_device}" != "lo" ] && [ "${ARPCHECK}" != "no" ] && \ - is_available ${parent_device} && \ - ( grep -qswi "up" /sys/class/net/${parent_device}/operstate || grep -qswi "1" /sys/class/net/${parent_device}/carrier ) ; then - echo $"Determining if ip address ${IPADDR} is already in use for device ${parent_device}..." - ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${parent_device} ${IPADDR}) - if [ $? = 1 ]; then - ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p') - net_log $"Error, some other host ($ARPINGMAC) already uses address ${IPADDR}." - return 1 - fi - fi - - /sbin/ip addr add ${IPADDR}/${PREFIX} brd ${BROADCAST} \ - dev ${parent_device} label ${DEVICE} - - # update ARP cache of neighboring computers: - if ! is_false "${ARPUPDATE}" && [ "${REALDEVICE}" != "lo" ]; then - /sbin/arping -q -A -c 1 -I ${parent_device} ${IPADDR} - ( sleep 2; /sbin/arping -q -U -c 1 -I ${parent_device} ${IPADDR} ) > /dev/null 2>&1 < /dev/null & - fi - - ! is_false "$IPV6INIT" && \ - /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE} - - if [ "$NO_ALIASROUTING" != yes ]; then - - GATEWAYDEV=$network_GATEWAYDEV; - - if [ -n "${GATEWAY}" -a \ - \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then - # set up default gateway, if it isn't already there - if ! is_default_gateway "$GATEWAY"; then - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} - fi - fi - - /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME} - - do_netreport=yes - ifuplocal_queue="$ifuplocal_queue $DEVICE" - fi - fi -} - -if [ "$BASH_VERSINFO" ]; then - shopt -s nullglob -else - allow_null_glob_expansion=foo -fi - -for FILE in ifcfg-${parent_device}:* ; do - is_ignored_file "$FILE" && continue - ini_env - . ./$FILE - [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-} - [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface - unset DEVICE -done - -for FILE in ifcfg-${parent_device}-range* ; do - is_ignored_file "$FILE" && continue - ini_env - . ./$FILE - - ipaddr_prefix=${IPADDR_START%.*} - ipaddr_startnum=${IPADDR_START##*.} - ipaddr_endnum=${IPADDR_END##*.} - - if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then - net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree" - continue - fi - - if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then - net_log $"error in $FILE: IPADDR_START greater than IPADDR_END" - continue - fi - - ipaddr_num=$ipaddr_startnum - ipaddr_clonenum=$CLONENUM_START - - while [ $ipaddr_num -le $ipaddr_endnum ]; do - IPADDR="$ipaddr_prefix.$ipaddr_num" - DEVICE="$parent_device:$ipaddr_clonenum" - IPV6INIT="no" - [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface - ipaddr_num=$(($ipaddr_num+1)) - ipaddr_clonenum=$(($ipaddr_clonenum+1)) - done -done - -# -# Remove any devices that should not be around -# -for DEVNUM in $rdev_LIST ; do - eval " rdev_mark=\$rdev_${DEVNUM}_mark " - if [ -z "$rdev_mark" ]; then - /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} - do_netreport=yes - fi -done -# -# Notify of new device creation -# - -if [ -n "$do_netreport" ]; then - do_netreport -fi - -if [ -x /sbin/ifup-local ]; then - for DEVICE in $ifuplocal_queue ; do - /sbin/ifup-local ${DEVICE} - done -fi diff --git a/sysconfig/network-scripts/ifup-bnep b/sysconfig/network-scripts/ifup-bnep deleted file mode 100755 index 019e741b..00000000 --- a/sysconfig/network-scripts/ifup-bnep +++ /dev/null @@ -1,55 +0,0 @@ -#! /bin/bash - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=${1} - -source_config - -# On hotplug events, just bring the virtual device up as if it's normal Ethernet -if [ -n "$IN_HOTPLUG" ]; then - exec sh -x /etc/sysconfig/network-scripts/ifup-eth ${CONFIG} $2 -fi - -start_panu() -{ - PANDARGS="--persist --pidfile=/run/pand-${DEVICE}.pid --ethernet=${DEVICE} --autozap" - [ "${CACHE}" != "no" -a "${CACHE}" != "NO" ] && PANDARGS="${PANDARGS} --cache" - if [ "${REMOTEBDADDR}" = "" ]; then - PANDARGS="${PANDARGS} --search" - else - PANDARGS="${PANDARGS} --connect ${REMOTEBDADDR}" - fi - /usr/bin/pand ${PANDARGS} -} - -start_nap() -{ - : -} - -start_gn() -{ - : -} - -case "$ROLE" in -PANU) - start_panu - ;; -NAP) - start_nap - ;; -GN) - start_gn - ;; -*) - echo Unknown BNEP mode :$ROLE - ;; -esac - diff --git a/sysconfig/network-scripts/ifup-ctc b/sysconfig/network-scripts/ifup-ctc deleted file mode 100755 index 83f754a0..00000000 --- a/sysconfig/network-scripts/ifup-ctc +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash -# -# /etc/sysconfig/network-scripts/ifup-ctc -# -# the ctc network driver is a point-to-point driver on S/390 machines -# -# To get the ctc module to load automatically at boot, you will need to -# add the following line to /etc/modprobe.conf: -# -# alias ctc0 ctc -# - -cd /etc/sysconfig/network-scripts -. ./network-functions - -. /etc/sysconfig/network - -CONFIG=$1 -[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG -source_config - -if [ "$2" = "boot" -a "${ONBOOT}" = "no" ] ; then - exit -fi -[ -n "${MTU}" ] && ip link set dev ${DEVICE} mtu ${MTU} - -[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) -ip addr add ${IPADDR} peer ${GATEWAY}/${PREFIX} dev ${DEVICE} -ip link set up dev ${DEVICE} -# Wait for the device to come up - the chandev'ified ctc driver can take -# quite a while... -timeout=0 -while ! ping -w 30 -c 1 ${GATEWAY} &>/dev/null; do - timeout=$(($timeout + 1)) - if [ $timeout = 20 ]; then - net_log $"ERROR: ${DEVICE} did not come up!" - break - fi -done - -if [ "${NETWORK}" != "" ] ; then - ip route add to ${GATEWAY} metric 1 dev ${DEVICE} -fi - -if [ "${GATEWAY}" != "" ]; then - if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then - # set up default gateway - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} - fi -fi - -/etc/sysconfig/network-scripts/ifup-post $1 diff --git a/sysconfig/network-scripts/ifup-eth b/sysconfig/network-scripts/ifup-eth deleted file mode 100755 index a0988edb..00000000 --- a/sysconfig/network-scripts/ifup-eth +++ /dev/null @@ -1,372 +0,0 @@ -#!/bin/bash -# Network Interface Configuration System -# Copyright (c) 1996-2014 Red Hat, Inc. all rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -CONFIG=${1} - -need_config "${CONFIG}" - -source_config - -if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then - DYNCONFIG=true -fi - -# load the module associated with that device -# /sbin/modprobe ${REALDEVICE} -is_available ${REALDEVICE} - -# bail out, if the MAC does not fit -if [ -n "${HWADDR}" ]; then - FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) - if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then - net_log $"Device ${DEVICE} has different MAC address than expected, ignoring." - exit 1 - fi -fi - -# If the device is a bridge, create it with brctl, if available. -if [ "${TYPE}" = "Bridge" ]; then - if [ ! -x /usr/sbin/brctl ]; then - net_log $"Bridge support not available: brctl not found" - exit 1 - fi - - if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then - /usr/sbin/brctl addbr -- ${DEVICE} || exit 1 - fi - - [ -n "${DELAY}" ] && /usr/sbin/brctl setfd -- ${DEVICE} ${DELAY} - [ -n "${STP}" ] && /usr/sbin/brctl stp -- ${DEVICE} ${STP} - [ -n "${PRIO}" ] && /usr/sbin/brctl setbridgeprio ${DEVICE} ${PRIO} - [ -n "${AGEING}" ] && /usr/sbin/brctl setageing ${DEVICE} ${AGEING} - - # add the bits to setup driver parameters here - for arg in $BRIDGING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - if [ "${key}" != "multicast_router" -a "${key}" != "hash_max" -a "${key}" != "multicast_snooping" ]; then - echo $value > /sys/class/net/${DEVICE}/bridge/$key - fi - done - - # set LINKDELAY (used as timeout when calling check_link_down()) - # to at least (${DELAY} * 2) + 7 if STP is enabled. This is the - # minimum time required for /sys/class/net/$REALDEVICE/carrier to - # become 1 after "ip link set dev $DEVICE up" is called. - if is_true "${STP}"; then - if [ -n "${DELAY}" ]; then - forward_delay="${DELAY}" - else - # If the ${DELAY} value is not set by the user, then we need to obtain - # the forward_delay value from kernel first, and convert it to seconds. - # Otherwise STP might not correctly complete the startup before trying - # to obtain an IP address from DHCP. - forward_delay="$(cat /sys/devices/virtual/net/${DEVICE}/bridge/forward_delay)" - forward_delay="$(convert2sec ${forward_delay} centi)" - fi - - forward_delay=$(expr ${forward_delay} \* 2 + 7) - - [ 0$LINKDELAY -lt $forward_delay ] && LINKDELAY=$forward_delay - - unset forward_delay - fi -fi - -# Create tap device. -if [ "${TYPE}" = "Tap" ]; then - [ -n "${OWNER}" ] && OWNER="user ${OWNER}" - TUNMODE="mode tap" - [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" - ip tuntap add ${TUNMODE} ${OWNER} dev ${DEVICE} > /dev/null -fi - -# Team master initialization. -if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifup-Team ]; then - ./ifup-Team ${CONFIG} $2 -fi - -# now check the real state -is_available_wait ${REALDEVICE} ${DEVTIMEOUT} || { - if [ -n "$alias" ]; then - net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." - else - net_log $"Device ${DEVICE} does not seem to be present, delaying initialization." - fi - exit 1 -} - - -# this isn't the same as the MAC in the configuration filename. It is -# available as a configuration option in the config file, forcing the kernel -# to think an ethernet card has a different MAC address than it really has. -if [ -n "${MACADDR}" ]; then - ip link set dev ${DEVICE} address ${MACADDR} -fi -if [ -n "${MTU}" ]; then - ip link set dev ${DEVICE} mtu ${MTU} -fi - -# is the device wireless? If so, configure wireless device specifics -is_wireless_device ${DEVICE} && . ./ifup-wireless - -# Team slave device? -if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifup-TeamPort ]; then - ./ifup-TeamPort ${CONFIG} $2 - ethtool_set - exit 0 -fi - -# slave device? -if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then - install_bonding_driver ${MASTER} - grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || { - /sbin/ip link set dev ${DEVICE} down - echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null - } - ethtool_set - - exit 0 -fi - -# Bonding initialization. For DHCP, we need to enslave the devices early, -# so it can actually get an IP. -if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then - install_bonding_driver ${DEVICE} - /sbin/ip link set dev ${DEVICE} up - for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do - is_ignored_file "$device" && continue - /sbin/ifup ${device##*/} || net_log "Unable to start slave device ${device##*/} for master ${DEVICE}." warning - done - - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} - - # add the bits to setup the needed post enslavement parameters - for arg in $BONDING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - if [ "${key}" = "primary" ]; then - echo $value > /sys/class/net/${DEVICE}/bonding/$key - fi - done -fi - -# If the device is part of a bridge, add the device to the bridge -if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then - if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then - /usr/sbin/brctl addbr -- ${BRIDGE} 2>/dev/null - fi - /sbin/ip addr flush dev ${DEVICE} 2>/dev/null - /sbin/ip link set dev ${DEVICE} up - ethtool_set - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} - /usr/sbin/brctl addif -- ${BRIDGE} ${DEVICE} - # add the bits to setup driver parameters here - for arg in $BRIDGING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - echo $value > /sys/class/net/${DEVICE}/brport/$key - done - # Upon adding a device to a bridge, - # it's necessary to make radvd reload its config - [ -r /run/radvd/radvd.pid ] && kill -HUP $(cat /run/radvd/radvd.pid) - exit 0 -fi - -if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then - if is_true "${PERSISTENT_DHCLIENT}"; then - ONESHOT=""; - else - ONESHOT="-1"; - fi; - generate_config_file_name - generate_lease_file_name - - # Initialize the dhclient args and obtain the hostname options if needed: - DHCLIENTARGS="${DHCLIENTARGS} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient-${DEVICE}.pid" - set_hostname_options DHCLIENTARGS - - echo - echo -n $"Determining IP information for ${DEVICE}..." - if ! is_true "${PERSISTENT_DHCLIENT}" && check_link_down ${DEVICE}; then - echo $" failed; no link present. Check cable?" - exit 1 - fi - - ethtool_set - - if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then - echo $" done." - dhcpipv4="good" - else - echo $" failed." - if is_true "${IPV4_FAILURE_FATAL}"; then - exit 1 - fi - if is_false "$IPV6INIT" || ! is_true "$DHCPV6C"; then - exit 1 - fi - net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning - fi - # end dynamic device configuration -else - if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then - # enable device without IP, useful for e.g. PPPoE - ip link set dev ${REALDEVICE} up - ethtool_set - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} - else - - expand_config - - [ -n "${ARP}" ] && \ - ip link set dev ${REALDEVICE} $(toggle_value arp $ARP) - - if ! ip link set dev ${REALDEVICE} up ; then - net_log $"Failed to bring up ${DEVICE}." - exit 1 - fi - - ethtool_set - - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} - - if [ "${DEVICE}" = "lo" ]; then - SCOPE="scope host" - else - SCOPE=${SCOPE:-} - fi - - if [ -n "$SRCADDR" ]; then - SRC="src $SRCADDR" - else - SRC= - fi - - # set IP address(es) - for idx in {0..256} ; do - if [ -z "${ipaddr[$idx]}" ]; then - break - fi - - if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then - if [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] ; then - ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${REALDEVICE} ${ipaddr[$idx]}) - if [ $? = 1 ]; then - ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p') - net_log $"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}." - exit 1 - fi - fi - - if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \ - brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then - net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." - fi - fi - - if [ -n "$SRCADDR" ]; then - sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1 - fi - - # update ARP cache of neighboring computers - if ! is_false "${arpupdate[$idx]}" && [ "${REALDEVICE}" != "lo" ]; then - /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} - ( sleep 2; - /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null & - fi - - # set lifetime of address to forever - ip addr change ${ipaddr[$idx]}/${prefix[$idx]} dev ${REALDEVICE} valid_lft forever preferred_lft forever - done - - # Set a default route. - if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then - # set up default gateway. replace if one already exists - if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then - ip route replace default ${METRIC:+metric $METRIC} \ - ${EXTRA_ROUTE_OPTS} \ - via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \ - ${GATEWAYDEV:+dev $GATEWAYDEV} || - net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}." - elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then - ip route replace default ${METRIC:+metric $METRIC} \ - ${EXTRA_ROUTE_OPTS} \ - ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} || - net_log $"Error adding default gateway for ${REALDEVICE}." - fi - fi - fi -fi - -# Add Zeroconf route. -if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then - ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link -fi - -if [ "${TYPE}" = "Bridge" ]; then - for arg in $BRIDGING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - if [ "${key}" = "multicast_router" -o "${key}" = "hash_max" -o "${key}" = "multicast_snooping" ]; then - echo $value > /sys/class/net/${DEVICE}/bridge/$key - fi - done -fi - -# IPv6 initialisation? -/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG} -if is_true "${DHCPV6C}" && [ -x /sbin/dhclient ]; then - - # Assign interface into a firewalld zone so we can obtain the IPv6 via DHCPv6: - if [ "${REALDEVICE}" != "lo" ]; then - dbus-send --print-reply --system --dest=org.fedoraproject.FirewallD1 \ - /org/fedoraproject/FirewallD1 \ - org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \ - string:"${ZONE}" string:"${DEVICE}" \ - > /dev/null 2>&1 - fi - - generate_config_file_name 6 - generate_lease_file_name 6 - echo - echo -n $"Determining IPv6 information for ${DEVICE}..." - - # Initialize the dhclient args for IPv6 and obtain the hostname options if needed: - DHCLIENTARGS="-6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /run/dhclient6-${DEVICE}.pid ${DEVICE}" - set_hostname_options DHCLIENTARGS - - if /sbin/dhclient $DHCLIENTARGS; then - echo $" done." - else - echo $" failed." - if [ "${dhcpipv4}" = "good" -o -n "${IPADDR}" ]; then - net_log "Unable to obtain IPv6 DHCP address ${DEVICE}." warning - else - exit 1 - fi - fi -fi - -exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2} diff --git a/sysconfig/network-scripts/ifup-ippp b/sysconfig/network-scripts/ifup-ippp deleted file mode 100755 index e1f08a79..00000000 --- a/sysconfig/network-scripts/ifup-ippp +++ /dev/null @@ -1,384 +0,0 @@ -#! /bin/bash -# -# ifup-ippp -# -# This script is normally called from the ifup script when it detects an ippp device. - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -# Get global network configuration -[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network - -GATEWAY="" - -# set device -CONFIG=$1 -[ -f "${CONFIG}" ] || CONFIG=ifcfg-${1} -source_config - -if [ "${2}" = "boot" -a "${ONBOOT}" = "no" ]; then - exit -fi - -if [ ! -f /var/lock/subsys/isdn ] && [ -x /etc/init.d/isdn ] ; then - /etc/init.d/isdn start -fi - -# check that ipppd is available for syncppp -if [ "$ENCAP" = "syncppp" ]; then - if [ ! -x /sbin/ipppd ] && [ ! -x /usr/sbin/ipppd ] ; then - /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd does not exist or is not executable" - exit 1 - fi -fi - -# check that isdnctrl is available -if [ ! -x /sbin/isdnctrl ] && [ ! -x /usr/sbin/isdnctrl ] ; then - /usr/bin/logger -p daemon.info -t ifup-ippp "isdnctrl does not exist or is not executable" - exit 1 -fi - -# check all ISDN devices -if ! isdnctrl list all >/dev/null 2>&1 ; then - /usr/bin/logger -p daemon.info -t ifup-ippp "cannot list ISDN devices" - exit 1 -fi - -# check if device already is configured -isdnctrl list $DEVICE >/dev/null 2>&1 && exit 0 - -function log_echo() -{ - /usr/bin/logger -p daemon.info -t ifup-ippp $"$*" -} - -function log_isdnctrl() -{ - /usr/bin/logger -p daemon.info -t ifup-ippp isdnctrl $* - isdnctrl $* >/dev/null 2>&1 || exit 1 -} - -function create_option_file() -{ - umask 066 - echo "$1" > /etc/ppp/ioption-secret-$DEVICE - umask 022 -} - -function start_ibod() -{ - # don't start ibod, if it's running - [ -f /var/lock/subsys/ibod ] && return - - device=$1 - if [ -f /etc/isdn/ibod.cf ] && [ -x /usr/sbin/ibod ] ; then - ibod $device & - pid=$(pidof ibod) - [ -n "$pid" ] && touch /var/lock/subsys/ibod - fi -} - -function addprovider() -{ - options= - if [ -z "$PHONE_OUT" ]; then - log_echo "Error: $1: no outgoing phone number set" - return 1 - fi - - # set the encapsulation mode - [ -z "$ENCAP" ] && ENCAP="syncppp" - - # set the dial mode - [ -z "$DIALMODE" ] && DIALMODE="off" - - [ "$AUTH" = "none" -o "$AUTH" = "noauth" -o -z "$AUTH" ] && AUTH="-pap -chap" - - # set layer-2/3 protocol - [ -z "$L2_PROT" ] && L2_PROT="hdlc" - [ -z "$L3_PROT" ] && L3_PROT="trans" - - # check local/remote IP - [ -z "$IPADDR" ] && IPADDR="0.0.0.0" - [ -z "$GATEWAY" ] && GATEWAY="0.0.0.0" - - # set default route - [ "$DEFROUTE" = "yes" ] && options="$options defaultroute deldefaultroute" - - # set authentication - _auth=$(echo "$AUTH" | sed 's/[a-z -]*//g') - if [ -n "$_auth" ]; then - if [ -z "$USER" -a "$DIALIN" != "on" ]; then - log_echo " Error: $1 (syncppp) user is not set" - return 1 - fi - if [ "$DIALIN" != "on" ]; then - # we should hide the user name, so i add user name to option file. - if [ "$AUTH" = "-pap +chap" ]; then - create_option_file "name \"$USER\"" - else - create_option_file "user \"$USER\"" - fi - options="$options file /etc/ppp/ioption-secret-$DEVICE" - fi - - # authentication options: - # +pap and/or +chap does not work correct by dialout - remove - # them if it's configured as dialout - [ "$DIALIN" = "on" ] || AUTH=$(echo "$AUTH" | sed 's/+[a-z]*//g') - fi - - # add ISDN device - log_isdnctrl addif $DEVICE - - # set local MSN - [ -z "$MSN" ] || log_isdnctrl eaz $DEVICE $MSN - - # set dialout numbers - if echo $COUNTRYCODE | grep ":" >/dev/null 2>&1 ; then - COUNTRYCODE="$(echo $COUNTRYCODE | cut -f 2 -d ':')" - [ "$COUNTRYCODE" = "0" ] && COUNTRYCODE= - else - COUNTRYCODE= - fi - for i in $PHONE_OUT; do - log_isdnctrl addphone $DEVICE out $COUNTRYCODE$PREFIX$AREACODE$i - done - for i in $PHONE_IN; do - log_isdnctrl addphone $DEVICE in $i - done - - # set layer-2/3 protocol - log_isdnctrl l2_prot $DEVICE $L2_PROT - log_isdnctrl l3_prot $DEVICE $L3_PROT - - # set encapsulation - log_isdnctrl encap $DEVICE $ENCAP - - # set dialmode - log_isdnctrl dialmode $DEVICE $DIALMODE - - [ -n "$SECURE" ] && log_isdnctrl secure $DEVICE $SECURE - [ -n "$HUPTIMEOUT" ] && log_isdnctrl huptimeout $DEVICE $HUPTIMEOUT - [ -n "$CHARGEHUP" ] && log_isdnctrl chargehup $DEVICE $CHARGEHUP - [ -n "$CHARGEINT" ] && log_isdnctrl chargeint $DEVICE $CHARGEINT - - [ -n "$IHUP" ] && log_isdnctrl ihup $DEVICE $IHUP - - # set the number of dial atempts for each number - [ -n "$DIALMAX" ] && log_isdnctrl dialmax $DEVICE $DIALMAX - - # set callback - if [ "$CALLBACK" = "out" -o "$CALLBACK" = "in" ] ; then - log_isdnctrl callback $DEVICE $CALLBACK - else - log_isdnctrl callback $DEVICE off - fi - [ -n "$CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $CBDELAY - [ -n "$CBHUP" ] && log_isdnctrl cbhup $DEVICE $CBHUP - - options="$options ipparam $DEVNAME" - - [ "$ENCAP" = "syncppp" ] && log_isdnctrl pppbind $DEVICE - - if [ "$IPADDR" = "0.0.0.0" ]; then - options="$options ipcp-accept-local" - else - if [ "$DIALIN" != "on" ]; then - options="$options noipdefault" - fi - fi - # Add device - options="$options /dev/$DEVICE" - - # set channel bundling - if [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ]; then - [ -z "$SLAVE_MSN" ] && SLAVE_MSN="$MSN" - [ -z "$SLAVE_PHONE_OUT" ] && SLAVE_PHONE_OUT="$PHONE_OUT" - [ -z "$SLAVE_PHONE_IN" ] && SLAVE_PHONE_IN="$PHONE_IN" - [ -z "$SLAVE_HUPTIMEOUT" ] && SLAVE_HUPTIMEOUT="$HUPTIMEOUT" - [ -z "$SLAVE_CHARGEHUP" ] && SLAVE_CHARGEHUP="$CHARGEHUP" - [ -z "$SLAVE_CHARGEINT" ] && SLAVE_CHARGEINT="$CHARGEINT" - [ -z "$SLAVE_CBHUP" ] && SLAVE_CBHUP="$CBHUP" - [ -z "$SLAVE_IHUP" ] && SLAVE_IHUP="$IHUP" - [ -z "$SLAVE_DIALMAX" ] && SLAVE_DIALMAX="$DIALMAX" - [ -z "$SLAVE_CALLBACK" ] && SLAVE_CALLBACK="$CALLBACK" - [ -z "$SLAVE_CBDELAY" ] && SLAVE_CBDELAY="$CBDELAY" - if [ "$DIALIN" != "on" ] ; then - [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto" - else - # Master should not dial by default on incoming MPPP - [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE" - fi - - slave=$SLAVE_DEVICE - options="$options /dev/$slave +mp" - - # Create slave and set options - log_isdnctrl addslave $DEVICE $slave - [ -z $SLAVE_MSN ] || log_isdnctrl eaz $slave $SLAVE_MSN - - # set phone number - for i in $SLAVE_PHONE_OUT; do - log_isdnctrl addphone $slave out $COUNTRYCODE$PREFIX$AREACODE$i - done - for i in $SLAVE_PHONE_IN; do - log_isdnctrl addphone $slave in $i - done - - # set layer-2/3 protocol - log_isdnctrl l2_prot $slave $L2_PROT - log_isdnctrl l3_prot $slave $L3_PROT - - # set encapsulation - log_isdnctrl encap $slave $ENCAP - - # set dial mode - log_isdnctrl dialmode $slave $SLAVE_DIALMODE - - [ -n "$SECURE" ] && log_isdnctrl secure $slave $SECURE - [ -n "$SLAVE_HUPTIMEOUT" ] && log_isdnctrl huptimeout $slave $SLAVE_HUPTIMEOUT - [ -n "$SLAVE_CHARGEHUP" ] && log_isdnctrl chargehup $slave $SLAVE_CHARGEHUP - [ -n "$SLAVE_CHARGEINT" ] && log_isdnctrl chargeint $slave $SLAVE_CHARGEINT - [ -n "$SLAVE_IHUP" ] && log_isdnctrl ihup $slave $SLAVE_IHUP - [ -n "$SLAVE_DIALMAX" ] && log_isdnctrl dialmax $slave $SLAVE_DIALMAX - - # set callback - [ -n "$SLAVE_CBHUP" ] && log_isdnctrl cbhup $slave $SLAVE_CBHUP - [ -n "$SLAVE_CALLBACK" ] || SLAVE_CALLBACK="off" - log_isdnctrl callback $slave $SLAVE_CALLBACK - [ -n "$SLAVE_CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $SLAVE_CBDELAY - - # options for master device - [ -n "$SLAVE_DELAY" ] && log_isdnctrl sdelay $DEVICE $SLAVE_DELAY - [ -n "$SLAVE_TRIGGER" ] && log_isdnctrl trigger $DEVICE $SLAVE_TRIGGER - fi - - if [ "$GATEWAY" = "0.0.0.0" ]; then - if [ "$DIALIN" != "on" ]; then - options="$options ipcp-accept-remote" - fi - options="$IPADDR:$GATEWAY $options" - else - options="$options $IPADDR:$GATEWAY" - fi - - # Van Jacobson style TCP/IP header compression and - # VJ connection-ID compression - [ "$VJ" = "off" ] && options="$options -vj" - [ "$VJCCOMP" = "off" ] && options="$options -vjccomp" - - # Address/Control compression, protocol field compression, - [ "$AC" = "off" ] && options="$options -ac" - [ "$PC" = "off" ] && options="$options -pc" - - # BSD-Compression scheme - if [ "$BSDCOMP" = "on" ] ; then - options="$options bsdcomp 9,9" - else - options="$options -bsdcomp" - fi - # Stac compression - if [ "$LZS" = "on" ] ; then - # supports LZS check mode 3 and 4 - [ -n "$LZS_MODE" ] || LZS_MODE="4" - [ "$LZS_MODE" = "3" ] && options="$options lzs 1" - [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4" - fi - - # Set max receive and max transmit units - [ -n "$MRU" ] && options="$options mru $MRU" - [ -n "$MTU" ] && options="$options mtu $MTU" - - # set CBCP protocoll - if [ "$CBCP" = "on" ] ; then - if [ -n "$CBCP_MSN" ] ; then - # User managed callback - options="$options callback $CBCP_MSN" - else - # admin managed callback, it's enabled by default - options="$options callback 6" - fi - else - # Disable CBCP - options="$options -callback-cbcp" - fi - - # set CCP protocoll - [ "$CCP" = "off" ] && options="$options noccp" - - # set host name - [ -n "$ISDN_HOSTNAME" ] && options="$options remotename $ISDN_HOSTNAME" - - # Set authentication - for i in $AUTH ; do - options="$options $i" - done - - # add ppp options - for i in $PPPOPTIONS ; do - options="$options $i" - done - - # check dns entry - if [ -z "$DNS1" -a -z "$DNS2" ]; then - options="$options ms-get-dns" - else - [ -n "$DNS1" ] && options="$options ms-dns $DNS1" - [ -n "$DNS2" ] && options="$options ms-dns $DNS2" - fi - - # set debug - [ "$DEBUG" = "yes" ] && options="-d $options" - - # set netmask, if available - [ -n "$NETMASK" ] && { - val=$(ipcalc --prefix $IPADDR $NETMASK) - pfx=${val##PREFIX=} - } - # activate ISDN device - /usr/bin/logger -p daemon.info -t ifup-ippp "ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE" - ip addr add $IPADDR peer $GATEWAY${pfx:/$pfx} dev $DEVICE - ip link set dev $DEVICE up - - if [ "$ENCAP" = "syncppp" ]; then - # start ipppd daemon - /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd $options $netmask" - ipppd $options $netmask >/dev/null 2>&1 - - # start ibod daemon - if [ "$DIALIN" != "on" ]; then - [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ] && start_ibod $DEVICE - fi - fi - - # set default gateway for dial on demand - if [ "$DIALMODE" = "auto" ] ; then - echo 1 > /proc/sys/net/ipv4/ip_dynaddr - if [ "$DEFROUTE" = "yes" ] ; then - if [ "$GATEWAY" = "0.0.0.0" ]; then - ip route replace default ${METRIC:+metric $METRIC} dev ${DEVICE} >/dev/null 2>&1 - else - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} >/dev/null 2>&1 - fi - fi - fi - - # Setup IPv6 - if ! is_false "$IPV6INIT" && ! [[ -z "$IPV6ADDR" ]]; then - # Native IPv6 use of device configured, check of encapsulation required - if [ "$ENCAP" = "syncppp" ]; then - echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'" - elif [ "$ENCAP" = "rawip" ]; then - echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'" - fi - fi - /etc/sysconfig/network-scripts/ifup-ipv6 $CONFIG -} - -addprovider || exit 1 - -exit 0 diff --git a/sysconfig/network-scripts/ifup-ipv6 b/sysconfig/network-scripts/ifup-ipv6 deleted file mode 100755 index ecbe5b79..00000000 --- a/sysconfig/network-scripts/ifup-ipv6 +++ /dev/null @@ -1,316 +0,0 @@ -#!/bin/bash -# -# ifup-ipv6 -# -# -# Taken from: -# (P) & (C) 2000-2006 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# RHL integration assistance by Pekka Savola <pekkas@netcore.fi> -# -# Version: 2006-07-20 -# -# Note: if called (like normally) by /etc/sysconfig/network-scripts/ifup -# exit codes aren't handled by "ifup" -# -# Uses following information from "/etc/sysconfig/network": -# IPV6_DEFAULTDEV=<device>: controls default route (optional) -# IPV6_DEFAULTGW=<address>: controls default route (optional) -# -# Uses following information from "/etc/sysconfig/network-scripts/ifcfg-$1": -# IPV6INIT=yes|no: controls IPv6 configuration for this interface -# IPV6ADDR=<IPv6 address>[/<prefix length>]: specify primary static IPv6 address -# IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional) -# IPV6_ROUTER=yes|no: controls IPv6 autoconfiguration (no: multi-homed interface without routing) -# IPV6_AUTOCONF=yes|no: controls IPv6 autoconfiguration -# defaults: -# IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes -# IPV6FORWARDING=no: IPV6_AUTOCONF=yes -# IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional) -# IPV6_PRIVACY="rfc3041": control IPv6 privacy (optional) -# This script only supports "rfc3041" (if kernel supports it) -# -# Optional for 6to4 tunneling (hardwired name of tunnel device is "tun6to4"): -# IPV6TO4INIT=yes|no: controls 6to4 tunneling setup -# IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay (default: 192.88.99.1) -# IPV6TO4_MTU=<MTU for IPv6>: controls IPv6 MTU for the 6to4 link (optional, default is MTU of interface - 20) -# IPV6TO4_IPV4ADDR=<IPv4 address>: overwrite local IPv4 address (optional) -# IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup additional interfaces -# Example: IPV6TO4_ROUTING="eth0-:f101::1/64 eth1-:f102::1/64" -# -# Optional for 6to4 tunneling to trigger radvd: -# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering (optional) -# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" (optional) -# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP) -# -# Required version of radvd to use 6to4 prefix recalculation -# 0.6.2p3 or newer supporting option "Base6to4Interface" -# Required version of radvd to use dynamic ppp links -# 0.7.0 + fixes or newer -# - - -. /etc/sysconfig/network - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG -source_config - -REALDEVICE=${DEVICE%%:*} -DEVICE=$REALDEVICE - -# Test whether IPv6 configuration is disabled for this interface -is_false "$IPV6INIT" && exit 0 - -[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 -. /etc/sysconfig/network-scripts/network-functions-ipv6 - - -# IPv6 test, module loaded, exit if system is not IPv6-ready -ipv6_test || exit 1 - -# Test device status -ipv6_test_device_status $DEVICE -if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 1 -fi - -# Setup IPv6 address on specified interface -if [ -n "$IPV6ADDR" ]; then - ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1 -fi - -# Get current global IPv6 forwarding -ipv6_global_forwarding_current="$(/sbin/sysctl -e -n net.ipv6.conf.all.forwarding)" - -# Set some proc switches depending on defines -if [ "$IPV6FORWARDING" = "yes" ]; then - # Global forwarding should be enabled - - # Check, if global IPv6 forwarding was already set by global script - if [ $ipv6_global_forwarding_current -ne 1 ]; then - net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel" - net_log $"Please restart network with '/sbin/service network restart'" - fi - - ipv6_local_forwarding=1 - ipv6_local_auto=0 - ipv6_local_accept_ra=0 - if [ "$IPV6_ROUTER" = "no" ]; then - ipv6_local_forwarding=0 - fi - if [ "$IPV6_AUTOCONF" = "yes" ]; then - ipv6_local_auto=1 - ipv6_local_accept_ra=2 - fi -else - # Global forwarding should be disabled - - # Check, if global IPv6 forwarding was already set by global script - if [ $ipv6_global_forwarding_current -ne 0 ]; then - net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel" - net_log $"Please restart network with '/sbin/service network restart'" - fi - - ipv6_local_forwarding=0 - ipv6_local_auto=1 - ipv6_local_accept_ra=1 - if [ "$IPV6_AUTOCONF" = "no" ]; then - ipv6_local_auto=0 - if [ ! "$IPV6_FORCE_ACCEPT_RA" = "yes" ]; then - ipv6_local_accept_ra=0 - fi - fi -fi - -if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_accept_ra >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1 -fi - -# Set IPv6 MTU, if given -if [ -n "$IPV6_MTU" ]; then - ipv6_set_mtu $DEVICE $IPV6_MTU -fi - -# Setup additional IPv6 addresses from list, if given -if [ -n "$IPV6ADDR_SECONDARIES" ]; then - for ipv6addr in $IPV6ADDR_SECONDARIES; do - ipv6_add_addr_on_device $DEVICE $ipv6addr - done -fi - -# Enable IPv6 RFC3041 privacy extensions if desired -if [ "$IPV6_PRIVACY" = "rfc3041" ]; then - if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1 - if [ $? -ne 0 ]; then - net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel" - fi - fi -fi - -# Setup default IPv6 route, check are done by function -if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" -fi - -# Setup additional static IPv6 routes on specified interface, if given -if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do - ipv6_add_route $args $DEVICE - done -fi - -# Setup of 6to4, if configured -if [ "$IPV6TO4INIT" = "yes" ]; then - valid6to4config="yes" - - # Test device status of 6to4 tunnel - ipv6_test_device_status tun6to4 - if [ $? = 0 ]; then - # device is already up - net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first" - exit 1 - fi - - # Get IPv4 address for global 6to4 prefix calculation - if [ -n "$IPV6TO4_IPV4ADDR" ]; then - # Take special configured from config file (precedence 1) - ipv4addr="$IPV6TO4_IPV4ADDR" - - # Get local IPv4 address from interface - ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addrlocal" ]; then - # Take configured from config file - ipv4addrlocal="$IPADDR" - fi - else - # Get IPv4 address from interface first (has precedence 2) - ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addr" ]; then - # Take configured from config file (precedence 3) - ipv4addr="$IPADDR" - fi - ipv4addrlocal="$ipv4addr" - fi - - if [ -n "$ipv4addr" ]; then - if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then - net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info - valid6to4config="no" - fi - if [ -z "$IPV6TO4_RELAY" ]; then - IPV6TO4_RELAY="192.88.99.1" - fi - - # Check/generate relay address - ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)" - if [ $? -ne 0 ]; then - valid6to4config="no" - fi - else - net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info - valid6to4config="no" - fi - - # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid - if [ "$valid6to4config" = "yes" ]; then - # Get MTU of master device - ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\<mtu\>/ { print $5 }')" - if [ -n "$ipv4mtu" ]; then - # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header - tunnelmtu=$(($ipv4mtu-20)) - fi - - if [ -n "$IPV6TO4_MTU" ]; then - if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then - net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning - else - tunnelmtu=$IPV6TO4_MTU - fi - fi - - ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1 - - # Add route to for compatible addresses (removed later again) - ipv6_add_route "::/96" "::" tun6to4 - - # Add default route, if device matches - if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then - if [ -n "$IPV6_DEFAULTGW" ]; then - net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning - fi - ipv6_set_default_route $ipv6to4_relay tun6to4 - fi - - # Add static routes - if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do - if [ -z "$network" ]; then - continue - fi - if [ -z "$gateway" ]; then - gateway="$ipv6to4_relay" - fi - ipv6_add_route $network $gateway tun6to4 - done - fi - - # Setup additional static IPv6 routes (newer config style) - if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then - sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do - if echo "$line" | LC_ALL=C grep -vq 'via'; then - # Add gateway if missing - line="$line via $ipv6to4_relay" - fi - /sbin/ip -6 route add $line - done - fi - - # Cleanup autmatically generated autotunnel (not needed for 6to4) - /sbin/ip -6 route del ::/96 dev tun6to4 - /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4 - - if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then - # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning - if [ $ipv6_global_forwarding_current -ne 1 ]; then - net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning - fi - - if [ -n "$IPV6TO4_ROUTING" ]; then - ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)" - if [ -n "$ipv6to4prefix" ]; then - # Add route to local networks - for devsuf in $IPV6TO4_ROUTING; do - dev="${devsuf%%-*}" - suf="$(echo $devsuf | awk -F- '{ print $2 }')" - ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf} - done - else - net_log $"Error occurred while calculating the IPv6to4 prefix" - fi - else - net_log $"radvd control enabled, but config is not complete" - fi - - # Control running radvd - ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE - fi - else - net_log $"6to4 configuration is not valid" - exit 1 - fi -fi - -#wait for all global IPv6 addresses to leave the "tentative" state -ipv6_wait_tentative $DEVICE diff --git a/sysconfig/network-scripts/ifup-plip b/sysconfig/network-scripts/ifup-plip deleted file mode 100755 index 2cea68b4..00000000 --- a/sysconfig/network-scripts/ifup-plip +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -source_config - -if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ]; then - exit -fi - -[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) -ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE} -ip link set up dev ${DEVICE} -ip route add ${NETWORK} dev ${DEVICE} - -. /etc/sysconfig/network - -if [ "${GATEWAY}" != "" ]; then - if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then - # set up default gateway - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} - fi -fi - -/etc/sysconfig/network-scripts/ifup-post $1 diff --git a/sysconfig/network-scripts/ifup-plusb b/sysconfig/network-scripts/ifup-plusb deleted file mode 100755 index 1b29afeb..00000000 --- a/sysconfig/network-scripts/ifup-plusb +++ /dev/null @@ -1,43 +0,0 @@ -#!/bin/sh -# -# /etc/sysconfig/network-scripts/ifup-plusb -# -# the plusb network driver is a USB host-host cable based on the Prolific -# chip. It works a lot like the plip driver. -# -# To get the plusb module to load automatically at boot, you will need to -# add the following lines to /etc/conf.modules: -# -# alias plusb0 plusb -# - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -source_config - -if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ] -then - exit -fi - -[ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) - -if [ ${BROADCAST} != "" ] ; then - ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} broadcast ${BROADCAST} dev ${DEVICE} -else - ip addr add ${IPADDR} peer ${REMIP}/${PREFIX} dev ${DEVICE} -fi -ip link set up dev ${DEVICE} - -. /etc/sysconfig/network - -if [ "${GATEWAY}" != "" ]; then - if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then - # set up default gateway - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} - fi -fi - -/etc/sysconfig/network-scripts/ifup-post $1 diff --git a/sysconfig/network-scripts/ifup-post b/sysconfig/network-scripts/ifup-post deleted file mode 100755 index f8a91add..00000000 --- a/sysconfig/network-scripts/ifup-post +++ /dev/null @@ -1,151 +0,0 @@ -#!/bin/bash - -# Source the general functions for is_true() and is_false(): -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -[ -f ../network ] && . ../network - -unset REALDEVICE -if [ "$1" = --realdevice ] ; then - REALDEVICE=$2 - shift 2 -fi - -CONFIG=$1 -source_config - -[ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE - -if is_false "$ISALIAS"; then - /etc/sysconfig/network-scripts/ifup-aliases ${DEVICE} ${CONFIG} -fi - -if ! is_true "$NOROUTESET"; then - /etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME} -fi - - -if ! is_false "${PEERDNS}" || ! is_false "${RESOLV_MODS}"; then - # Obtain the DNS entries when using PPP if necessary: - [ -n "${MS_DNS1}" ] && DNS1="${MS_DNS1}" - [ -n "${MS_DNS2}" ] && DNS2="${MS_DNS2}" - - # Remove duplicate DNS entries and shift them, if necessary: - update_DNS_entries - - # Determine what regexp we should use (for testing below): - if [ -n "${DNS3}" ]; then - grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}[^#]?nameserver[[:space:]]+${DNS3}" - elif [ -n "${DNS2}" ]; then - grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}[^#]?nameserver[[:space:]]+${DNS2}" - elif [ -n "${DNS1}" ]; then - grep_regexp="[^#]?nameserver[[:space:]]+${DNS1}" - else - # No DNS entries used at all ->> match everything. - grep_regexp=".*" - fi - - # Test if the search field needs updating, or - # if the nameserver entries order should be updated: - if [ -n "${DOMAIN}" ] && ! grep -q "^search.*${DOMAIN}.*$" /etc/resolv.conf || - ! tr --delete '\n' < /etc/resolv.conf | grep -E -q "${grep_regexp}"; then - - if tmp_file=$(mktemp); then - search_str='' - - while read line; do - case ${line} in - - # Skip nameserver entries when at least one DNS option was given - # (at this stage we know that we have to update all the nameserver - # enries anyway -- see below), or copy them if we are changing just - # the 'search' field in /etc/resolv.conf: - nameserver*) - if [[ "${grep_regexp}" != ".*" ]]; then - continue - else - echo "${line}" >> "${tmp_file}" - fi - ;; - - domain* | search*) - if [ -n "${DOMAIN}" ]; then - read search value < <(echo ${line}) - search_str+=" ${value}" - else - echo "${line}" >> "${tmp_file}" - fi - ;; - - # Keep the rest of the /etc/resolv.conf as it was: - *) - echo "${line}" >> "${tmp_file}" - ;; - esac - done < /etc/resolv.conf - - # Insert the domain into 'search' field: - if [ -n "${DOMAIN}" ]; then - echo "search ${DOMAIN}${search_str}" >> "${tmp_file}" - fi - - # Add the requested nameserver entries: - [ -n "${DNS1}" ] && echo "nameserver ${DNS1}" >> "${tmp_file}" - [ -n "${DNS2}" ] && echo "nameserver ${DNS2}" >> "${tmp_file}" - [ -n "${DNS3}" ] && echo "nameserver ${DNS3}" >> "${tmp_file}" - - # Backup resolv.conf only if it doesn't exist already: - ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save - - # Maintain permissions, but set umask in case it doesn't exist: - umask_old=$(umask) - umask 022 - - # Update the resolv.conf: - change_resolv_conf "${tmp_file}" - - rm -f "${tmp_file}" - umask ${umask_old} - unset tmp_file search_str umask_old - else - net_log $"/etc/resolv.conf was not updated: failed to create temporary file" 'err' 'ifup-post' - fi - fi - - unset grep_regexp -fi - -# don't set hostname on ppp/slip connections -if [ "$2" = "boot" -a \ - "${DEVICE}" != lo -a \ - "${DEVICETYPE}" != "ppp" -a \ - "${DEVICETYPE}" != "slip" ]; then - if need_hostname; then - IPADDR=$(LANG=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }') - eval $(/bin/ipcalc --silent --hostname ${IPADDR} ; echo "status=$?") - if [ "$status" = "0" ]; then - set_hostname $HOSTNAME - fi - fi -fi - -# Set firewall ZONE for this device (empty means default): -if [ "${REALDEVICE}" != "lo" ]; then - dbus-send --system --dest=org.fedoraproject.FirewallD1 \ - /org/fedoraproject/FirewallD1 \ - org.fedoraproject.FirewallD1.zone.changeZoneOfInterface \ - string:"${ZONE}" string:"${DEVICE}" \ - > /dev/null 2>&1 -fi - -# Notify programs that have requested notification -do_netreport - -if [ -x /sbin/ifup-local ]; then - /sbin/ifup-local ${DEVICE} -fi - -exit 0 diff --git a/sysconfig/network-scripts/ifup-routes b/sysconfig/network-scripts/ifup-routes deleted file mode 100755 index 517c2bbb..00000000 --- a/sysconfig/network-scripts/ifup-routes +++ /dev/null @@ -1,76 +0,0 @@ -#! /bin/bash -# -# adds static routes which go through device $1 - -if [ -z "$1" ]; then - echo $"usage: ifup-routes <net-device> [<nickname>]" - exit 1 -fi - -MATCH='^[[:space:]]*(\#.*)?$' - -handle_file () { - . $1 - routenum=0 - while [ "x$(eval echo '$'ADDRESS$routenum)x" != "xx" ]; do - eval $(ipcalc -p $(eval echo '$'ADDRESS$routenum) $(eval echo '$'NETMASK$routenum)) - line="$(eval echo '$'ADDRESS$routenum)/$PREFIX" - if [ "x$(eval echo '$'GATEWAY$routenum)x" != "xx" ]; then - line="$line via $(eval echo '$'GATEWAY$routenum)" - fi - line="$line dev $2" - /sbin/ip route add $line - routenum=$(($routenum+1)) - done -} - -handle_ip_file() { - local f t type= file=$1 proto="-4" - f=${file##*/} - t=${f%%-*} - type=${t%%6} - if [ "$type" != "$t" ]; then - proto="-6" - fi - { cat "$file" ; echo ; } | while read line; do - if [[ ! "$line" =~ $MATCH ]]; then - /sbin/ip $proto $type add $line - fi - done -} - -FILES="/etc/sysconfig/network-scripts/route-$1 /etc/sysconfig/network-scripts/route6-$1" -if [ -n "$2" -a "$2" != "$1" ]; then - FILES="$FILES /etc/sysconfig/network-scripts/route-$2 /etc/sysconfig/network-scripts/route6-$2" -fi - -for file in $FILES; do - if [ -f "$file" ]; then - if grep -Eq '^[[:space:]]*ADDRESS[0-9]+=' $file ; then - # new format - handle_file $file ${1%:*} - else - # older format - handle_ip_file $file - fi - fi -done - - -# Red Hat network configuration format -NICK=${2:-$1} -CONFIG="/etc/sysconfig/network-scripts/$NICK.route" -[ -f $CONFIG ] && handle_file $CONFIG $1 - - -# Routing rules -FILES="/etc/sysconfig/network-scripts/rule-$1 /etc/sysconfig/network-scripts/rule6-$1" -if [ -n "$2" -a "$2" != "$1" ]; then - FILES="$FILES /etc/sysconfig/network-scripts/rule-$2 /etc/sysconfig/network-scripts/rule6-$2" -fi - -for file in $FILES; do - if [ -f "$file" ]; then - handle_ip_file $file - fi -done diff --git a/sysconfig/network-scripts/ifup-sit b/sysconfig/network-scripts/ifup-sit deleted file mode 100755 index 3daa3801..00000000 --- a/sysconfig/network-scripts/ifup-sit +++ /dev/null @@ -1,108 +0,0 @@ -#!/bin/bash -# -# ifup-sit -# -# -# Taken from: -# (P) & (C) 2000-2003 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# RHL integration assistance by Pekka Savola <pekkas@netcore.fi> -# -# Version: 2003-09-08 -# -# Uses following information from /etc/sysconfig/network: -# IPV6_DEFAULTDEV=<device>: controls default route (optional) -# IPV6_DEFAULTGW=<address>: controls default route (optional) -# -# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1: -# DEVICE=<device> -# IPV6INIT=yes|no: controls IPv6 configuration for this interface -# IPV6_MTU=<MTU for IPv6>: controls IPv6 MTU for this link (optional) -# -# For static tunnels -# IPV6TUNNELIPV4=<IPv4 address>: IPv4 address of remote tunnel endpoint -# IPV6TUNNELIPV4LOCAL=<IPv4 address>: (optional) local IPv4 address of tunnel -# IPV6ADDR=<IPv6 address>[/<prefix length>]: (optional) local IPv6 address of a numbered tunnel -# IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional) additional local IPv6 addresses -# - - -. /etc/sysconfig/network - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG -source_config - -# IPv6 don't need aliases anymore, config is skipped -REALDEVICE=${DEVICE%%:*} -[ "$DEVICE" != "$REALDEVICE" ] && exit 0 - -# Test whether IPv6 configuration is disabled for this interface -is_false "$IPV6INIT" && exit 0 - -[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 -. /etc/sysconfig/network-scripts/network-functions-ipv6 - - -# IPv6 test, module loaded, exit if system is not IPv6-ready -ipv6_test || exit 1 - -# Generic tunnel device sit0 is not supported here -if [ "$DEVICE" = "sit0" ]; then - net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" - exit 1 -fi - -if [ -z "$IPV6TUNNELIPV4" ]; then - net_log $"Missing remote IPv4 address of tunnel, configuration is not valid" - exit 1 -fi - -# Test device status -ipv6_test_device_status $DEVICE -if [ $? = 0 ]; then - # device is already up - net_log $"Device '$DEVICE' is already up, please shutdown first" - exit 1 -fi - -# Create tunnel -ipv6_add_tunnel_device $DEVICE $IPV6TUNNELIPV4 "" $IPV6TUNNELIPV4LOCAL || exit 1 - -# Set IPv6 MTU, if given -if [ -n "$IPV6_MTU" ]; then - ipv6_set_mtu $DEVICE $IPV6_MTU -fi - -# Apply local IPv6 address, if given (numbered tunnel) -if [ -n "$IPV6ADDR" ]; then - ipv6_add_addr_on_device $DEVICE $IPV6ADDR -fi - -# Setup additional IPv6 addresses from list, if given -if [ -n "$IPV6ADDR_SECONDARIES" ]; then - for ipv6addr in $IPV6ADDR_SECONDARIES; do - ipv6_add_addr_on_device $DEVICE $ipv6addr - done -fi - -# Setup default IPv6 route, check are done by function -if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" -fi - -# Setup additional static IPv6 routes on specified interface, if given -if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device ipv6route args; do - ipv6_add_route $ipv6route :: $DEVICE -done -fi - -# Setup static routes -/etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} diff --git a/sysconfig/network-scripts/ifup-tunnel b/sysconfig/network-scripts/ifup-tunnel deleted file mode 100755 index afdfe928..00000000 --- a/sysconfig/network-scripts/ifup-tunnel +++ /dev/null @@ -1,94 +0,0 @@ -#!/bin/bash -# Copyright (C) 1996-2009 Red Hat, Inc. all rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Thanks to: -# - Razvan Corneliu C.R. Vilt <razvan.vilt@linux360.ro> -# - Aaron Hope <aaron.hope@unh.edu> -# - Sean Millichamp <sean@enertronllc.com> -# for providing the scripts this one is based on - -. /etc/init.d/functions - -cd /etc/sysconfig/network-scripts -. ./network-functions - -CONFIG=$1 -need_config "$CONFIG" -source_config - -if [ "$PEER_OUTER_IPADDR" = "$PEER_INNER_IPADDR" ]; then - # Specifying PEER_INNER_IPADDR would automatically add a route to the peer - # through the tunnel, redirecting tunnel packets back to the tunnel and - # creating a dead loop. - unset PEER_INNER_IPADDR -fi - -case "$TYPE" in -GRE) - MODE=gre - proto=-4 - /sbin/modprobe ip_gre - ;; -IPIP) - MODE=ipip - proto=-4 - /sbin/modprobe ipip - ;; -IPIP6|EXTERNAL) - MODE=ipip6 - proto=-6 - /sbin/modprobe ip6_tunnel - ;; -*) - net_log $"Invalid tunnel type $TYPE" - exit 1 - ;; -esac - -# Generic tunnel devices are not supported here -if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 -o "$DEVICE" = ip6tnl0 ]; then - net_log $"Device '$DEVICE' isn't supported as a valid GRE device name." - exit 1 -fi - -# Create the tunnel -# The outer addresses are those of the underlying (public) network. -if [ "$TYPE" = 'EXTERNAL' ]; then - /sbin/ip link add "$DEVICE" type ip6tnl external -else - /sbin/ip $proto tunnel add "$DEVICE" mode "$MODE" \ - ${MY_OUTER_IPADDR:+local "$MY_OUTER_IPADDR"} \ - ${PEER_OUTER_IPADDR:+remote "$PEER_OUTER_IPADDR"} \ - ${KEY:+key "$KEY"} ${TTL:+ttl "$TTL"} -fi - -if [ -n "$MTU" ]; then - /sbin/ip link set "$DEVICE" mtu "$MTU" -fi - -# The inner address are used mainly for communication between a gateway -# and a private network. When the peer is configured with an inner address -# contained in the peer's private network or identical to it's public address, -# it need not be specified. -/sbin/ip addr add "$MY_INNER_IPADDR" dev "$DEVICE" \ - ${PEER_INNER_IPADDR:+peer "$PEER_INNER_IPADDR"} - -/sbin/ip link set dev "$DEVICE" up - -# IPv6 initialisation? -/etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG} - -exec /etc/sysconfig/network-scripts/ifup-post "$CONFIG" "$2" diff --git a/sysconfig/network-scripts/ifup-wireless b/sysconfig/network-scripts/ifup-wireless deleted file mode 100755 index 702b6199..00000000 --- a/sysconfig/network-scripts/ifup-wireless +++ /dev/null @@ -1,62 +0,0 @@ -#!/bin/bash -# Network Interface Configuration System -# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved. -# -# Based on PCMCIA wireless script by (David Hinds/Jean Tourrilhes) -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License, version 2, -# as published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# Configure wireless network device options. See iw(8) for more info. -# Valid variables: -# MODE: Ad-Hoc, Managed, etc. -# ESSID: Name of the wireless network -# FREQ: Frequency to operate on. See CHANNEL -# KEY: Encryption key for WEP. - -# Only meant to be called from ifup. - -cd /etc/sysconfig/network-scripts -. ./network-functions - -IW=${IW:-iw} - -[ "$KEY" ] && KEYS="key d:0:$KEY" - -shopt -s nocasematch - -case "$MODE" in -managed) - if [ "$ESSID" ]; then - $IW dev "$DEVICE" set type managed - $IW dev "$DEVICE" connect -w "$ESSID" $FREQ $KEYS - fi - ;; -ad-hoc) - if [ -n "$ESSID" -a -n "$FREQ" ]; then - $IW dev "$DEVICE" set type ibss - $IW dev "$DEVICE" ibss join "$ESSID" "$FREQ" $KEYS - fi - ;; -monitor) - if [ "$FREQ" ]; then - $IW dev "$DEVICE" set type monitor - $IW dev "$DEVICE" set freq "$FREQ" - fi - ;; -esac - -if [ -n "$WOWLAN" ] ; then - PHYDEVICE=$(phy_wireless_device $DEVICE) - iw phy $PHYDEVICE wowlan enable ${WOWLAN} -fi diff --git a/sysconfig/network-scripts/init.ipv6-global b/sysconfig/network-scripts/init.ipv6-global deleted file mode 100755 index b20ff72e..00000000 --- a/sysconfig/network-scripts/init.ipv6-global +++ /dev/null @@ -1,164 +0,0 @@ -#!/bin/bash -# -# init.ipv6-global -# -# -# Taken from: init.ipv6-global -# (P) & (C) 2001-2005 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# RHL integration assistance by Pekka Savola <pekkas@netcore.fi> -# -# Version: 2005-01-04 -# -# Calling parameters: -# $1: action (currently supported: start|stop|showsysctl) -# $2: position for start|stop (currently supported: pre|post) -# -# Called by hooks from /etc/[rc.d/]init.d/network -# -# Uses following information from /etc/sysconfig/network: -# IPV6FORWARDING=yes|no: controls global IPv6 forwarding (default: no) -# IPV6_AUTOCONF=yes|no: controls global automatic IPv6 configuration -# (default: yes if IPV6FORWARDING=no, no if IPV6FORWARDING=yes) -# IPV6_AUTOTUNNEL=yes|no: controls automatic IPv6 tunneling (default: no) -# IPV6_DEFAULTGW=<ipv6address[%interface]> [optional] -# IPV6_DEFAULTDEV=<interface> [optional] -# - -. /etc/sysconfig/network - -cd /etc/sysconfig/network-scripts -. ./network-functions - -# Get action and hook position -ACTION="$1" -POSITION="$2" - -[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 -. /etc/sysconfig/network-scripts/network-functions-ipv6 - -# Initialize IPv6, depending on caller option -case $ACTION in -start) - case $POSITION in - pre) - # IPv6 test, module loaded, exit if system is not IPv6-ready - ipv6_test || exit 1 - - if [ "$IPV6FORWARDING" = "yes" ]; then - ipv6_global_forwarding=1 - ipv6_global_auto=0 - else - ipv6_global_forwarding=0 - if [ "$IPV6_AUTOCONF" = "no" ]; then - ipv6_global_auto=0 - else - ipv6_global_auto=1 - fi - fi - - if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then - # Reset IPv6 sysctl switches for "all", "default" and still existing devices - for i in /proc/sys/net/ipv6/conf/* ; do - interface=${i##*/} - sinterface=${interface/.//} - # Host/Router behaviour for the interface - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=$ipv6_global_forwarding >/dev/null 2>&1 - - # Autoconfiguration and redirect handling for Hosts - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=$ipv6_global_auto >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=$ipv6_global_auto >/dev/null 2>&1 - done - fi - ;; - - post) - # IPv6 test, module loaded, exit if system is not IPv6-ready - ipv6_test || exit 1 - - if [ "$IPV6_AUTOTUNNEL" = "yes" ]; then - ipv6_enable_autotunnel - # autotunnel interface doesn't require a MTU setup - fi - - ## Add some routes which should never appear on the wire - # Unreachable IPv4-only addresses, normally blocked by source address selection - /sbin/ip route add unreach ::ffff:0.0.0.0/96 - # Unreachable IPv4-mapped addresses - /sbin/ip route add unreach ::0.0.0.0/96 - # Unreachable 6to4: IPv4 multicast, reserved, limited broadcast - /sbin/ip route add unreach 2002:e000::/19 - # Unreachable 6to4: IPv4 loopback - /sbin/ip route add unreach 2002:7f00::/24 - # Unreachable 6to4: IPv4 private (RFC 1918) - /sbin/ip route add unreach 2002:0a00::/24 - /sbin/ip route add unreach 2002:ac10::/28 - /sbin/ip route add unreach 2002:c0a8::/32 - # Unreachable 6to4: IPv4 private (APIPA / DHCP link-local) - /sbin/ip route add unreach 2002:a9fe::/32 - # Unreachable IPv6: 6bone test addresses - /sbin/ip route add unreach 3ffe:ffff::/32 - - # Set default route for autotunnel, if specified - if [ "$IPV6_DEFAULTDEV" = "sit0" -a "$IPV6_AUTOTUNNEL" = "yes" ]; then - if [ -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route $IPV6_DEFAULTGW $IPV6_DEFAULTDEV sit0 - elif [ -n "$IPV6_DEFAULTDEV" ]; then - ipv6_set_default_route "" $IPV6_DEFAULTDEV sit0 - fi - fi - ;; - - *) - echo "Usage: $0 $1 {pre|post}" - ;; - - esac - ;; - -stop) - case $POSITION in - pre) - ;; - - post) - # IPv6 test, no module loaded, exit if system is not IPv6-ready - ipv6_test testonly || exit 0 - - if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then - for i in /proc/sys/net/ipv6/conf/* ; do - interface=${i##*/} - sinterface=${interface/.//} - # Assume Host behaviour - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=0 >/dev/null 2>&1 - - # Disable autoconfiguration and redirects - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=0 >/dev/null 2>&1 - done - fi - - # Cleanup still existing tunnel devices - ipv6_cleanup_tunnel_devices - - # Shut down generic tunnel interface now - if ipv6_test_device_status sit0 ; then - /sbin/ip link set sit0 down - fi - ;; - - *) - echo "Usage: $0 $1 {pre|post}" - ;; - - esac - ;; - -*) - echo $"Usage: $0 {start|stop|reload|restart|showsysctl}" - exit 1 - ;; -esac diff --git a/sysconfig/network-scripts/network-functions b/sysconfig/network-scripts/network-functions deleted file mode 100644 index c2756b19..00000000 --- a/sysconfig/network-scripts/network-functions +++ /dev/null @@ -1,744 +0,0 @@ -# -*-Shell-script-*- -# -# This file is not a stand-alone shell script; it provides functions -# to network scripts that source it. - -# Set up a default search path. -PATH="/sbin:/usr/sbin:/bin:/usr/bin" -export PATH - -# We need to initialize the $HOSTNAME variable by ourselves now: -# (It was previously done for RHEL-6 branch, but got lost in time.) -HOSTNAME="$(hostname)" - -[ -z "$__sed_discard_ignored_files" ] && . /etc/init.d/functions - -get_hwaddr () -{ - if [ -f /sys/class/net/${1}/address ]; then - tr '[a-z]' '[A-Z]' < /sys/class/net/${1}/address - elif [ -d "/sys/class/net/${1}" ]; then - LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \ - awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, - "\\1", 1)); }' - fi -} - -get_config_by_device () -{ - LANG=C grep -l "^[[:space:]]*DEVICE=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" \ - /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" -} - -get_config_by_hwaddr () -{ - LANG=C grep -il "^[[:space:]]*HWADDR=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" -} - -get_config_by_subchannel () -{ - LANG=C grep -E -i -l \ - "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \ - /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" -} - -get_config_by_name () -{ - LANG=C grep -E -i -l "^[[:space:]]*NAME=\"(Auto |System )?${1}\"" \ - /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" -} - -get_device_by_hwaddr () -{ - LANG=C ip -o link | awk -F ': ' -vIGNORECASE=1 '!/link\/ieee802\.11/ && /'"$1"'/ { print $2 }' -} - -get_uuid_by_config () -{ - dbus-send --system --print-reply --dest=com.redhat.ifcfgrh1 /com/redhat/ifcfgrh1 com.redhat.ifcfgrh1.GetIfcfgDetails string:"/etc/sysconfig/network-scripts/$1" 2>/dev/null | awk -F '"' '/string / { print $2 }' -} - -generate_lease_file_name () -{ - local ver=$1 - LEASEFILE="/var/lib/dhclient/dhclient$ver-${DEVICE}.leases" - if [ -f $LEASEFILE ]; then - return - fi - LEASEFILE="/var/lib/dhclient/dhclient$ver-${UUID}-${DEVICE}.lease" -} - -generate_config_file_name () -{ - local ver=$1 - if [ -s /etc/dhcp/dhclient$ver-${DEVICE}.conf ]; then - DHCLIENTCONF="-cf /etc/dhcp/dhclient$ver-${DEVICE}.conf"; - elif [ -s /etc/dhclient$ver-${DEVICE}.conf ]; then - DHCLIENTCONF="-cf /etc/dhclient$ver-${DEVICE}.conf"; - else - DHCLIENTCONF=''; - fi -} - -need_config () -{ - local nconfig - - CONFIG="ifcfg-${1}" - [ -f "${CONFIG}" ] && return - CONFIG="${1##*/}" - [ -f "${CONFIG}" ] && return - nconfig=$(get_config_by_name "${1}") - if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then - CONFIG=${nconfig##*/} - return - fi - local addr=$(get_hwaddr ${1}) - if [ -n "$addr" ]; then - nconfig=$(get_config_by_hwaddr ${addr}) - if [ -n "$nconfig" ] ; then - CONFIG=${nconfig##*/} - [ -f "${CONFIG}" ] && return - fi - fi - nconfig=$(get_config_by_device ${1}) - if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then - CONFIG=${nconfig##*/} - return - fi -} - -source_config () -{ - CONFIG=${CONFIG##*/} - DEVNAME=${CONFIG##ifcfg-} - . /etc/sysconfig/network-scripts/$CONFIG - [ -r "keys-$DEVNAME" ] && . /etc/sysconfig/network-scripts/keys-$DEVNAME - case "$TYPE" in - Ethernet) - DEVICETYPE="eth" - ;; - CIPE) - DEVICETYPE="cipcb" - ;; - IPSEC) - DEVICETYPE="ipsec" - ;; - Modem) - DEVICETYPE="ppp" - ;; - xDSL) - DEVICETYPE="ppp" - ;; - ISDN) - DEVICETYPE="ippp" - ;; - Wireless) - DEVICETYPE="eth" - ;; - "Token Ring") - DEVICETYPE="eth" - ;; - CTC) - DEVICETYPE="ctc" - ;; - GRE | IPIP | IPIP6) - DEVICETYPE="tunnel" - ;; - SIT | sit) - DEVICETYPE="sit" - ;; - InfiniBand | infiniband) - DEVICETYPE="ib" - ;; - OVS*) - DEVICETYPE="ovs" - ;; - esac - if [ -n "$HWADDR" ]; then - HWADDR=$(tr '[a-z]' '[A-Z]' <<<"$HWADDR") - fi - if [ -n "$MACADDR" ]; then - MACADDR=$(tr '[a-z]' '[A-Z]' <<<"$MACADDR") - fi - [ -z "$DEVICE" -a -n "$HWADDR" ] && DEVICE=$(get_device_by_hwaddr $HWADDR) - [ -z "$DEVICETYPE" ] && DEVICETYPE=$(echo ${DEVICE} | sed "s/[0-9]*$//") - [ -z "$REALDEVICE" -a -n "$PARENTDEVICE" ] && REALDEVICE=$PARENTDEVICE - [ -z "$REALDEVICE" ] && REALDEVICE=${DEVICE%%:*} - [ -z "$SYSCTLDEVICE" ] && SYSCTLDEVICE=${REALDEVICE/.//} - if [ "${DEVICE}" != "${REALDEVICE}" ]; then - ISALIAS=yes - else - ISALIAS=no - fi - if is_nm_running && [ "$REALDEVICE" != "lo" ] ; then - nm_con_load "$CONFIG" - if ! is_false $NM_CONTROLLED; then - UUID=$(get_uuid_by_config $CONFIG) - [ -n "$UUID" ] && _use_nm=true - fi - fi -} - -nm_con_load () { - dbus-send --system --print-reply \ - --dest=org.freedesktop.NetworkManager \ - /org/freedesktop/NetworkManager/Settings \ - org.freedesktop.NetworkManager.Settings.LoadConnections \ - array:string:"/etc/sysconfig/network-scripts/${1}" >/dev/null 2>&1 -} - -ethtool_set() -{ - oldifs=$IFS; - IFS=';'; - if [ -n "${ETHTOOL_DELAY}" ]; then - # Convert microseconds to seconds: - local ETHTOOL_DELAY_SEC=$(convert2sec ${ETHTOOL_DELAY} micro) - sleep ${ETHTOOL_DELAY_SEC} - fi - for opts in $ETHTOOL_OPTS ; do - IFS=$oldifs; - if [[ "${opts}" =~ [[:space:]]*- ]]; then - /sbin/ethtool $opts - else - /sbin/ethtool -s ${REALDEVICE} $opts - fi - IFS=';'; - done - IFS=$oldifs; -} - -expand_config () -{ - local i=0 val - for idx in '' {0..255} ; do - ipaddr[$i]=$(eval echo '$'IPADDR$idx) - if [ -z "${ipaddr[$i]}" ]; then - [ "$idx" ] && [ $idx -ge 2 ] && break - continue - fi - prefix[$i]=$(eval echo '$'PREFIX$idx) - netmask[$i]=$(eval echo '$'NETMASK$idx) - broadcast[$i]=$(eval echo '$'BROADCAST$idx) - arpcheck[$i]=$(eval echo '$'ARPCHECK$idx) - arpupdate[$i]=$(eval echo '$'ARPUPDATE$idx) - - if [ "${prefix[$i]}x" != "x" ]; then - val=$(/bin/ipcalc --netmask "${ipaddr[$i]}/${prefix[$i]}") - netmask[$i]=${val##NETMASK=} - fi - - if [ "${netmask[$i]}x" = "x" ]; then - val=$(/bin/ipcalc --netmask "${ipaddr[$i]}") - netmask[$i]=${val##NETMASK=} - fi - - if [ "${prefix[$i]}x" = "x" ]; then - val=$(/bin/ipcalc --prefix ${ipaddr[$i]} ${netmask[$i]}) - prefix[$i]=${val##PREFIX=} - fi - - if [ "${broadcast[$i]}x" = "x" ]; then - val=$(/bin/ipcalc --broadcast ${ipaddr[$i]} ${netmask[$i]}) - broadcast[$i]=${val##BROADCAST=} - fi - - if [ "${arpcheck[$i]}x" != "x" ]; then - arpcheck[$i]=${arpcheck[$i]##ARPCHECK=} - arpcheck[$i]=${arpcheck[$i],,*} - fi - - if [ "${arpupdate[$i]}x" != "x" ]; then - arpupdate[$i]=${arpupdate[$i]##ARPUPDATE=} - arpupdate[$i]=${arpupdate[$i],,*} - fi - - i=$((i+1)) - done - - [ -n "$DHCP_HOSTNAME" ] && DHCP_HOSTNAME=${DHCP_HOSTNAME%%.*} - - if [ -z "${NETWORK}" ]; then - eval $(/bin/ipcalc --network ${ipaddr[0]} ${netmask[0]}) - fi -} - -toggle_value () -{ - if [ "$2" = "yes" -o "$2" = "YES" ] ; then - echo "$1 on" - elif [ "$2" = "no" -o "$2" = "NO" ] ; then - echo "$1 off" - else - echo '' - fi -} - -do_netreport () -{ - # Notify programs that have requested notification - ( - cd /run/netreport || exit - for i in * ; do - if [ -f $i ]; then - if [ "$(id -u)" = "0" ]; then - OWNER=$(stat -c %U $i) - su -s /bin/bash $OWNER -c "kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1" > /dev/null 2>&1 - else - kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1 - fi - fi - done - ) -} - -is_nm_running () -{ - dbus-send --system --print-reply \ - --dest=org.freedesktop.DBus \ - /org/freedesktop/DBus \ - org.freedesktop.DBus.GetNameOwner \ - string:"org.freedesktop.NetworkManager" >/dev/null 2>&1 -} - -is_nm_active () -{ - LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^${1}:connected$" -} - -is_nm_handling () -{ - LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$" -} - -is_nm_device_unmanaged () -{ - LANG=C nmcli -t --fields GENERAL dev show "${1}" 2>/dev/null | awk -F ':' '/GENERAL.STATE/ { if ($2 == "unmanaged") exit 0 ; else exit 1; }' -} - -# Sets $alias to the device module if $? != 0 -is_available () -{ - [ -z "$1" ] && return 1 - - [ -d "/sys/class/net/$1" ] && return 0 - - [ -n "$BONDING_OPTS" ] && install_bonding_driver $1 - - alias=$(modprobe -c | awk \ - 'BEGIN { alias = ""; } - $1 == "alias" && $2 == "'"$1"'" { alias = $3; } - $1 == "install" { install[$2] = $3; } - END { - cmd = install[alias]; - print alias; - if (alias == "" || alias == "off" || cmd == "/bin/true" || cmd == ":") - exit 1; - exit 0; - } - ') - [ $? -eq 0 ] || return 2 - - modprobe $1 > /dev/null 2>&1 || { - return 1 - } - if [ -n "$HWADDR" ]; then - local curdev=$(get_device_by_hwaddr "$HWADDR") - if [ -z "$curdev" ]; then - return 1 - fi - fi - - if [ ${alias} = "bonding" ]; then - install_bonding_driver $1 - fi - - [ -d "/sys/class/net/$1" ] && return 0 || return 1 -} - -is_available_wait () -{ - [ -z "$1" ] && return 1 - - local retry=${2##*[!0-9]*} - - is_available $1 && return 0 - ret=$? - - while [ 0"$retry" -gt 0 ]; do - sleep 1 - [ -d "/sys/class/net/$1" ] && return 0 - retry=$(($retry -1)) - done - - return $ret -} - -is_hostname_set () -{ - case "${HOSTNAME}" in - '(none)' | 'localhost' | 'localhost.localdomain') - # Hostname NOT set: - return 1 - ;; - *) - # Hostname IS set: - return 0 - ;; - esac -} - -need_hostname () -{ - # Should we avoid obtaining hostname from DHCP? (user override) - is_true "${NO_DHCP_HOSTNAME}" && return 1 - - if is_hostname_set; then - # Hostname is already set, we do not need to acquire it: - return 1 - else - # Hostname is NOT set, we need to acquire it: - return 0 - fi -} - -set_hostname_options () -{ - # User explicitly requires to *not* send DHCP_HOSTNAME, DHCP_FQDN or HOSTNAME: - is_false "${DHCP_SEND_HOSTNAME}" && return - - if [[ -n "${DHCP_HOSTNAME}" && -n "${DHCP_FQDN}" ]]; then - net_log $"Both 'DHCP_HOSTNAME=${DHCP_HOSTNAME}' and 'DHCP_FQDN=${DHCP_FQDN}' are configured... Using DHCP_FQDN." warning - fi - - local hostname_options='' - - # DHCP_FQDN takes precedence before DHCP_HOSTNAME -- as it does in NetworkManager, - # and DHCP_HOSTNAME takes precedence before HOSTNAME: - if [[ -n "${DHCP_FQDN}" ]]; then - hostname_options="-F ${DHCP_FQDN}" - elif [[ -n "${DHCP_HOSTNAME}" ]]; then - hostname_options="-H ${DHCP_HOSTNAME}" - elif is_hostname_set; then - # We need to truncate the hostname in case it is the FQDN: - hostname_options="-H ${HOSTNAME%%.*}" - else - # Nothing to send to the DHCP server: - # ['(none)', 'localhost' or 'localhost.localdomain' are not valid] - return - fi - - # Append the hostname options to the content of passed variable name: - eval "$1='${!1} ${hostname_options}'" - - return -} - -set_hostname () -{ - hostname $1 - if ! grep search /etc/resolv.conf >/dev/null 2>&1; then - domain=$(echo $1 | sed 's/^[^\.]*\.//') - if [ -n "$domain" ]; then - rsctmp=$(mktemp /tmp/XXXXXX); - cat /etc/resolv.conf > $rsctmp - echo "search $domain" >> $rsctmp - - # Backup resolv.conf only if it doesn't exist already: - ! [ -f /etc/resolv.conf.save ] && cp -af /etc/resolv.conf /etc/resolv.conf.save - - change_resolv_conf $rsctmp - /bin/rm -f $rsctmp - fi - fi -} - -check_device_down () -{ - [ ! -d /sys/class/net/$1 ] && return 0 - if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then - return 1 - else - return 0 - fi -} - -check_link_down () -{ - if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then - ip link set dev $1 up >/dev/null 2>&1 - fi - timeout=0 - delay=10 - [ -n "$LINKDELAY" ] && delay=$(($LINKDELAY * 2)) - while [ $timeout -le $delay ]; do - [ "$(cat /sys/class/net/$REALDEVICE/carrier 2>/dev/null)" != "0" ] && return 1 - sleep 0.5 - timeout=$((timeout+1)) - done - return 0 -} - -check_default_route () -{ - LC_ALL=C ip route list match 0.0.0.0/0 | grep -q default -} - -find_gateway_dev () -{ - . /etc/sysconfig/network - if [ -n "${GATEWAY}" -a "${GATEWAY}" != "none" ] ; then - dev=$(LC_ALL=C /sbin/ip route get to "${GATEWAY}" 2>/dev/null | \ - sed -n 's/.* dev \([[:alnum:]]*\) .*/\1/p') - if [ -n "$dev" ]; then - GATEWAYDEV="$dev" - fi - fi -} - -# After the device $1 goes away, restore the standard default route; typically -# used for ppp with DEFROUTE temporarily replacing the "standard" default -# route. -# FIXME: This function doesn't support some newer features (GATEWAY in ifcfg, -# $WINDOW, $METRIC) -add_default_route () -{ - . /etc/sysconfig/network - check_default_route && return 0 - find_gateway_dev - if [ "$GATEWAYDEV" != "" -a -n "${GATEWAY}" -a \ - "${GATEWAY}" != "none" ]; then - if ! check_device_down $1; then - if [ "$GATEWAY" = "0.0.0.0" ]; then - /sbin/ip route add default dev ${GATEWAYDEV} - else - /sbin/ip route add default via ${GATEWAY} - fi - fi - elif [ -f /etc/default-routes ]; then - while read spec; do - /sbin/ip route add $spec - done < /etc/default-routes - rm -f /etc/default-routes - fi -} - -is_wireless_device () -{ - [ -x /usr/sbin/iw ] || return 1 - LC_ALL=C /usr/sbin/iw dev $1 info > /dev/null 2>&1 && return 0 - return 1 -} - -phy_wireless_device () -{ - cat /sys/class/net/$1/phy80211/name -} - -bond_master_exists () -{ - local bond_name - [ -z "${1}" ] && return 1 - [ ! -f /sys/class/net/bonding_masters ] && return 1 - - for bond_name in $(< /sys/class/net/bonding_masters); do - [ "${bond_name}" == "${1}" ] && return 0 - done - return 1 -} - -install_bonding_driver () -{ - local fn="install_bonding_driver" - - if ! bond_master_exists ${1}; then - modprobe bonding || return 1 - echo "+$1" > /sys/class/net/bonding_masters 2>/dev/null - fi - ( - # Set config here - need_config "$1" - source_config - if [ -f /sys/class/net/${DEVICE}/bonding/slaves ] && [ $(wc -l < /sys/class/net/${DEVICE}/bonding/slaves) -eq 0 ]; then - /sbin/ip link set dev ${DEVICE} down - - # parse options and put them to arrays - for arg in $BONDING_OPTS ; do - bopts_keys[${#bopts_keys[*]}]=${arg%%=*} - bopts_vals[${#bopts_vals[*]}]=${arg##*=} - done - - # add the bits to setup driver parameters here - # first set mode, miimon - for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do - key=${bopts_keys[$idx]} - value=${bopts_vals[$idx]} - - if [ "${key}" = "mode" ] ; then - echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || { - net_log $"Failed to set value '$value' [mode] to ${DEVICE} bonding device" err $fn - } - bopts_keys[$idx]="" - fi - if [ "${key}" = "miimon" ] ; then - echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key || { - net_log $"Failed to set value '$value' [miimon] to ${DEVICE} bonding device" err $fn - } - bopts_keys[$idx]="" - fi - done - - # set all other remaining options - for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do - key=${bopts_keys[$idx]} - value=${bopts_vals[$idx]} - - # option already set; take next - [[ -z "$key" ]] && continue - - if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then - OLDIFS=$IFS; - IFS=','; - for arp_ip in $value; do - if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then - echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key || { - net_log $"Failed to set '$arp_ip' value [arp_ip_target] to ${DEVICE} bonding device" err $fn - } - fi - done - IFS=$OLDIFS; - elif [ "${key}" = "arp_ip_target" ]; then - if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then - echo "$value" > /sys/class/net/${DEVICE}/bonding/$key || { - net_log $"Failed to set '$value' value [arp_ip_target] to ${DEVICE} bonding device" err $fn - } - fi - elif [ "${key}" != "primary" ]; then - echo $value > /sys/class/net/${DEVICE}/bonding/$key || { - net_log $"Failed to set '$value' value [$key] to ${DEVICE} bonding device" err $fn - } - fi - done - fi - ) - return 0 -} - -is_bonding_device () -{ - [ -f "/sys/class/net/$1/bonding/slaves" ] -} - -# Invoke this when /etc/resolv.conf has changed: -change_resolv_conf () -{ - s=$(/bin/grep '^[\ \ ]*option' /etc/resolv.conf 2>/dev/null) - if [ $# -gt 1 ]; then - if [ "x$s" != "x" ]; then - s="$s"$'\n' - fi - n_args=$# - while [ $n_args -gt 0 ]; do - case "$s" in - *$1*) - shift - n_args=$(($n_args-1)) - continue - ;; - esac - s="$s$1" - shift - if [ $# -gt 0 ]; then - s="$s"$'\n' - fi - n_args=$(($n_args-1)) - done - elif [ $# -eq 1 ]; then - if [ "x$s" != "x" ]; then - s="$s"$'\n'$(/bin/grep -vF "$s" $1) - else - s=$(cat $1) - fi - fi - (echo "$s" > /etc/resolv.conf) >/dev/null 2>&1; - r=$? - if [ $r -eq 0 ]; then - [ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context - /usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf" - [ -e /run/nscd/socket ] && /usr/sbin/nscd -i hosts # invalidate cache - fi - return $r -} - -# Logging function -# -# Usage: net_log <message> <err|warning|info> <optional file/function name> -# -# Default level is 'err'. - -net_log() -{ - local message="$1" - local level="$2" - local name="$3" - - [ -z "$message" ] && return 1 - [ -z "$level" ] && level=err - [ -z "$name" ] && name=$0 - - case $level in - 'debug') - local txt_level=$"DEBUG " - ;; - 'err') - local txt_level=$"ERROR " - ;; - 'warning') - local txt_level=$"WARN " - ;; - 'info') - local txt_level=$"INFO " - ;; - esac - - echo "$txt_level: [$name] $message" - - if [ -x /usr/bin/logger ]; then - /usr/bin/logger -p daemon.$level -t "$name" "$message" - fi - return 0 -} - -update_DNS_entries() -{ - # Remove duplicate values from DNS options if any: - if [ -n "${DNS3}" ] && [[ "${DNS3}" == "${DNS2}" || "${DNS3}" == "${DNS1}" ]]; then - unset DNS3 - fi - - if [ -n "${DNS2}" ] && [[ "${DNS2}" == "${DNS1}" ]]; then - unset DNS2 - fi - - # Shift the DNS options if necessary: - if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then - DNS1="${DNS2}" - unset DNS2 - fi - - if [ -z "${DNS2}" ] && [ -n "${DNS3}" ]; then - DNS2="${DNS3}" - unset DNS3 - fi - - # We need to check DNS1 again in case only DNS3 was set at all: - if [ -z "${DNS1}" ] && [ -n "${DNS2}" ]; then - DNS1="${DNS2}" - unset DNS2 - fi -} diff --git a/sysconfig/network-scripts/network-functions-ipv6 b/sysconfig/network-scripts/network-functions-ipv6 deleted file mode 100644 index b5b3e939..00000000 --- a/sysconfig/network-scripts/network-functions-ipv6 +++ /dev/null @@ -1,1084 +0,0 @@ -# network-functions-ipv6 -# -# Taken from: network-functions-ipv6 -# (P) & (C) 1997-2005 by Peter Bieringer <pb@bieringer.de> -# -# You will find more information on the initscripts-ipv6 homepage at -# http://www.deepspace6.net/projects/initscripts-ipv6.html -# -# Version: 2006-08-03 -# -# - - -##### Test for IPv6 capabilities -# $1: (optional) testflag: currently supported: "testonly" (do not load a module) -# return code: 0=ok 2=IPv6 test fails -ipv6_test() { - local fn="ipv6_test" - - local testflag=$1 - - if ! [ -f /proc/net/if_inet6 ]; then - if [ "$testflag" = "testonly" ]; then - return 2 - else - modprobe ipv6 - - if ! [ -f /proc/net/if_inet6 ]; then - return 2 - fi - fi - fi - - if ! [ -d /proc/sys/net/ipv6/conf/ ]; then - return 2 - fi - - return 0 -} - -##### Static IPv6 route configuration - -# Set static IPv6 route -# $1: <IPv6 network> : to route -# $2: <IPv6 gateway> : over which $1 should be routed (if "::", gw will be skipped) -# $3: [<Interface>] : (optional) -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem adding route -ipv6_add_route() { - local fn="ipv6_add_route" - - local networkipv6=$1 - local gatewayipv6=$2 - local device=$3 # maybe empty - - if [ -z "$networkipv6" ]; then - net_log $"Missing parameter 'IPv6-network' (arg 1)" err $fn - return 1 - fi - - if [ -z "$gatewayipv6" ]; then - net_log $"Missing parameter 'IPv6-gateway' (arg 2)" err $fn - return 1 - fi - - ipv6_test || return 2 - - ipv6_test_ipv6_addr_valid $networkipv6 || return 2 - ipv6_test_ipv6_addr_valid $gatewayipv6 || return 2 - - if [ -z "$device" ]; then - local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 metric 1 2>&1)" - else - if [ "$gatewayipv6" = "::" ]; then - local returntxt="$(/sbin/ip -6 route add $networkipv6 dev $device metric 1 2>&1)" - else - local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 dev $device metric 1 2>&1)" - fi - fi - - if [ -n "$returntxt" ]; then - if echo $returntxt | LC_ALL=C grep -q "File exists"; then - # Netlink: "File exists" - true - elif echo $returntxt | LC_ALL=C grep -q "No route to host"; then - # Netlink: "No route to host" - net_log $"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' through device '$device'" err $fn - return 3 - else - net_log $"Unknown error" err $fn - return 3 - fi - fi - - return 0 -} - -##### automatic tunneling configuration - -## Configure automatic tunneling up -# return code: 0=ok 2=IPv6 test fails 3=major problem -ipv6_enable_autotunnel() { - local fn="ipv6_enable_autotunnel" - - ipv6_test || return 2 - - # enable IPv6-over-IPv4 tunnels - if ipv6_test_device_status sit0; then - true - else - # bring up basic tunnel device - /sbin/ip link set sit0 up - - if ! ipv6_test_device_status sit0; then - net_log $"Tunnel device 'sit0' enabling didn't work" err $fn - return 3 - fi - - # Set sysctls proper (regardless "default") - /sbin/sysctl -e -w net.ipv6.conf.sit0.forwarding=1 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_redirects=0 >/dev/null 2>&1 - fi - - return 0 -} - -##### Interface configuration - -## Add an IPv6 address for given interface -# $1: <Interface> -# $2: <IPv6 address[/prefix]> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_add_addr_on_device() { - local fn="ipv6_add_addr_on_device" - - local device=$1 - local address=$2 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$address" ]; then - net_log $"Missing parameter 'IPv6-address' (arg 2)" err $fn - return 1 - fi - - ipv6_test || return 2 - - ipv6_test_ipv6_addr_valid $address || return 1 - - ipv6_test_device_status $device - local result=$? - - if [ "$result" = "0" ]; then - true - elif [ "$result" != "11" ]; then - net_log $"Device '$device' doesn't exist" err $fn - return 3 - else - /sbin/ip link set $device up - - if ! ipv6_test_device_status $device; then - net_log $"Device '$device' enabling didn't work" err $fn - return 3 - fi - fi - - # Extract address parts - local prefixlength_implicit="$(echo $address | awk -F/ '{ print $2 }')" - local address_implicit="${address%%/*}" - - # Check prefix length and using '64' as default - if [ -z "$prefixlength_implicit" ]; then - local prefixlength_implicit="64" - local address="$address_implicit/$prefixlength_implicit" - fi - - /sbin/ip -6 addr replace $address dev $device - local result=$? - - if [ $result -eq 2 ]; then - return 0 - elif [ $result -ne 0 ]; then - net_log $"Cannot add IPv6 address '$address' on dev '$device'" err $fn - return 3 - fi - - return 0 -} - - -## Remove all IPv6 routes and addresses on given interface (cleanup to prevent kernel crashes) -# $1: <Interface> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_cleanup_device() { - local fn="ipv6_cleanup_device" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - # Remove all IPv6 routes through this device (but not "lo") - if [ "$device" != "lo" ]; then - /sbin/ip -6 route flush dev $device scope global >/dev/null 2>&1 - /sbin/ip -6 route flush dev $device scope site >/dev/null 2>&1 - fi - - # Remove all IPv6 addresses on this interface - /sbin/ip -6 addr flush dev $device scope global >/dev/null 2>&1 - /sbin/ip -6 addr flush dev $device scope site >/dev/null 2>&1 - - return 0 -} - - -## Remove all IPv6 6to4 related routes and addresses on given interface -# $1: <Interface> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_cleanup_6to4_device() { - local fn="ipv6_cleanup_6to4_device" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - # Cleanup 6to4 addresses on this device - /sbin/ip -6 addr show dev $device scope global permanent | awk '/\<inet6\>/ && $2 ~ /^2002:/ { print $2 }' | while read addr; do - /sbin/ip -6 addr del ${addr} dev ${device} - done - - # Get all IPv6 routes through given interface related to 6to4 and remove them - /sbin/ip -6 route show dev $device | LC_ALL=C grep "^2002:" | while read ipv6net dummy; do - /sbin/ip -6 route del $ipv6net dev $device - done - - return 0 -} - - -##### Some address test functions - -## Test a given IPv6 address for validity -# $1: <IPv6 address> -# return code: 0=ok 1=not valid -ipv6_test_ipv6_addr_valid() { - ipcalc -cs6 $1 -} - - -## Test a given IPv4 address for validity -# $1: <IPv4 address> -# return code: 0=ok 1=not valid -ipv6_test_ipv4_addr_valid() { - ipcalc -cs4 $1 -} - - -## Test a given IPv4 address for not a private but unicast one -# $1: <IPv4 address> -# return code: 0=ok 1=argument error 10=private or not unicast -ipv6_test_ipv4_addr_global_usable() { - local fn="ipv6_test_ipv4_addr_global_usable" - - local testipv4addr_globalusable=$1 - - - if [ -z "$testipv4addr_globalusable" ]; then - return 1 - fi - - # Test for a globally usable IPv4 address now - # test 0.0.0.0/8 - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=0\.0\.0\.0" && return 10 - # test 10.0.0.0/8 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=10\.0\.0\.0" && return 10 - # test 127.0.0.0/8 (loopback) - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=127\.0\.0\.0" && return 10 - # test 169.254.0.0/16 (APIPA / DHCP link local) - /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=169\.254\.0\.0" && return 10 - # test 172.16.0.0/12 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.240.0.0 | LC_ALL=C grep -q "NETWORK=172\.16\.0\.0" && return 10 - # test 192.168.0.0/16 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=192\.168\.0\.0" && return 10 - # test 224.0.0.0/3 (multicast and reserved, broadcast) - /bin/ipcalc --network $testipv4addr_globalusable 224.0.0.0 | LC_ALL=C grep -q "NETWORK=224\.0\.0\.0" && return 10 - - return 0 -} - - -## Test a given device for status -# $1: <Interface> -# return code: 0=ok 1=argument error 10=not exists 11=down -ipv6_test_device_status() { - local fn="ipv6_test_device_status" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - # Test if device exists - if [ ! -d "/sys/class/net/${device}" ]; then - # not exists - return 10 - fi - - # Test if device is up - if /sbin/ip link show dev $device 2>/dev/null | LC_ALL=C grep -q "UP"; then - # up - return 0 - else - # down - return 11 - fi -} - - -## Create 6to4 prefix -# $1: <IPv4 address> -# stdout: <6to4address> -# return code: 0=ok 1=argument error -ipv6_create_6to4_prefix() { - local fn="ipv6_create_6to4_prefix" - - local ipv4addr=$1 - - if [ -z "$ipv4addr" ]; then - net_log $"Missing parameter 'IPv4 address' (arg 1)" err $fn - fi - - local major1="${ipv4addr%%.*}" - local minor1="$(echo $ipv4addr | awk -F. '{ print $2 }')" - local major2="$(echo $ipv4addr | awk -F. '{ print $3 }')" - local minor2="$(echo $ipv4addr | awk -F. '{ print $4 }')" - - if [ -z "$major1" -o -z "$minor1" -o -z "$major2" -o -z "$minor2" ]; then - return 1 - fi - - if [ $major1 -eq 0 ]; then - local block1="$(printf "%x" $minor1)" - else - local block1="$(printf "%x%02x" $major1 $minor1)" - fi - if [ $major2 -eq 0 ]; then - local block2="$(printf "%x" $minor2)" - else - local block2="$(printf "%x%02x" $major2 $minor2)" - fi - - local prefix6to4="2002:$block1:$block2" - - echo "$prefix6to4" - return 0 -} - - -## Check and create 6to4 tunnel relay address -# $1: <IPv4 address|IPv6to4 address> -# stdout: <tunnel relay address> -# return code: 0=ok 1=argument error -ipv6_create_6to4_relay_address() { - local fn="ipv6_create_6to4_relay_address" - - local addr=$1 - - if [ -z "$addr" ]; then - net_log $"Missing parameter 'address' (arg 1)" err $fn - return 1 - fi - - # Check - if ipv6_test_ipv4_addr_valid $addr ; then - # ok, an IPv4 one - if ipv6_test_ipv4_addr_global_usable $addr; then - # IPv4 globally usable - local ipv6to4_relay="::$addr" - else - net_log $"Given address '$addr' is not a global IPv4 one (arg 1)" err $fn - return 1 - fi - else - net_log $"Given address '$addr' is not a valid IPv4 one (arg 1)" err $fn - return 1 - fi - - echo "$ipv6to4_relay" - - return 0 -} - - -##### 6to4 tunneling setup - -## Configure 6to4 tunneling up -# $1: <Interface> : only "tun6to4" is supported -# $2: <IPv4 address> : global IPv4 address of interface (will be used to generate 6to4 prefix) -# $3: [<IPv6 suffix>] : for 6to4 prefix (optional, default is "::1") -# $4: [<MTU>] : MTU of tunnel device (optional, default is automatic) -# $5: [<IPv4 address>] : local IPv4 address of tunnel interface (required in case of 6to4 behind NAT) -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_add_6to4_tunnel() { - local fn="ipv6_add_6to4_tunnel" - - local device=$1 - local globalipv4=$2 - local globalipv6to4suffix=$3 - local mtu=$4 - local localipv4=$5 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$globalipv4" ]; then - net_log $"Missing parameter 'global IPv4 address' (arg 2)" err $fn - return 1 - fi - - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi - - # Copy global IPv4 address to local if last one is not given - if [ -z "$localipv4" ]; then - localipv4="$globalipv4" - fi - - ipv6_test || return 2 - - # Generate 6to4 address - local prefix6to4="$(ipv6_create_6to4_prefix $globalipv4)" - if [ $? -ne 0 -o -z "$prefix6to4" ]; then - return 3 - fi - - if [ -z "$globalipv6to4suffix" ]; then - local address6to4="${prefix6to4}::1/16" - else - local address6to4="${prefix6to4}::${globalipv6to4suffix}/16" - fi - - ipv6_add_tunnel_device tun6to4 0.0.0.0 $address6to4 $localipv4 - if [ $? -ne 0 ]; then - local retval=3 - else - local retval=0 - fi - - # Add unspecific unreachable route for local 6to4 address space - /sbin/ip route add unreach ${prefix6to4}::/48 - - # Set MTU, if given - if [ -n "$mtu" ]; then - ipv6_set_mtu $device $mtu - fi - - return $retval -} - - -## Configure all 6to4 tunneling down -# $1: <Interface> : only "tun6to4" is supported -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_cleanup_6to4_tunnels() { - local fn="ipv6_cleanup_6to4_tunnels" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - ipv6_del_tunnel_device tun6to4 - - # Remove all unspecific unreachable routes for local 6to4 address space - /sbin/ip -6 route | LC_ALL=C grep "^unreachable 2002:.*/48 dev lo" | while read token net rest; do - /sbin/ip route del unreach $net - done - - return 0 -} - - -## Configure 6to4 tunneling down -# $1: <Interface> : only "tun6to4" is supported -# $2: <IPv4 address> : global address of local interface -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_del_6to4_tunnel() { - local fn="ipv6_del_6to4_tunnel" - - local device=$1 - local localipv4=$2 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$localipv4" ]; then - net_log $"Missing parameter 'local IPv4 address' (arg 2)" err $fn - return 1 - fi - - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi - - ipv6_test || return 2 - - ipv6_del_tunnel_device tun6to4 - local retval=$? - - # Remove unspecific unreachable route for local 6to4 address space - /sbin/ip route del unreach ${prefix6to4}::/48 - - return $retval -} - - -## Configure a static tunnel device up -# $1: <Interface> -# $2: <IPv4 address> : of foreign tunnel -# $3: [<IPv6 address>] : local one of a P-t-P tunnel (optional) -# $4: [<IPv4 address>] : local one of tunnel (optional) -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_add_tunnel_device() { - local fn="ipv6_add_tunnel_device" - - local device=$1 - local addressipv4tunnel=$2 - local addressipv6local=$3 - local addressipv4tunnellocal=$4 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$addressipv4tunnel" ]; then - net_log $"Missing parameter 'IPv4-tunnel address' (arg 2)" err $fn - return 1 - fi - - if [ -z "$addressipv4tunnellocal" ]; then - local addressipv4tunnellocal="any" - fi - - ipv6_test || return 2 - - if ! ipv6_test_device_status $device; then - local ttldefault="$(/sbin/sysctl -e net.ipv4.ip_default_ttl | awk '{ print $3 }')" - if [ -z "$ttldefault" ]; then - local ttldefault=64 - fi - - # Test whether remote IPv4 address was already applied to another tunnel - if [ "$addressipv4tunnel" != "0.0.0.0" -a "$addressipv4tunnel" != "any" ]; then - /sbin/ip tunnel show remote $addressipv4tunnel 2>/dev/null | LC_ALL=C grep -w "ipv6/ip" | while IFS=":" read devnew rest; do - if [ "$devnew" != "$device" ]; then - net_log $"Given remote address '$addressipv4tunnel' on tunnel device '$device' is already configured on device '$devnew'" err $fn - return 3 - fi - done - fi - - /sbin/ip tunnel add $device mode sit ttl $ttldefault remote $addressipv4tunnel local $addressipv4tunnellocal - if [ $? -ne 0 ]; then - return 3 - fi - - # Test, whether "ip tunnel show" reports valid content - if ! /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "remote"; then - net_log $"Tunnel device '$device' creation didn't work" err $fn - return 3 - fi - - /sbin/ip link set $device up - - if ! ipv6_test_device_status $device; then - net_log $"Tunnel device '$device' bringing up didn't work" err $fn - return 3 - fi - - # Set sysctls proper (regardless "default") - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=1 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 - - if [ -n "$addressipv6local" ]; then - # Setup P-t-P address - ipv6_add_addr_on_device $device $addressipv6local - if [ $? -ne 0 ]; then - return 3 - fi - fi - else - false - fi - - return 0 -} - - -## Configure a static tunnel device down -# $1: <Interface> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_del_tunnel_device() { - local fn="ipv6_del_tunnel_device" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - if ipv6_test_device_status $device; then - ipv6_cleanup_device $device - else - if [ "$device" != "sit0" ]; then - false - fi - fi - - if [ "$device" != "sit0" ]; then - if /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "ipv6/ip"; then - /sbin/ip tunnel del $device - - if ipv6_test_device_status $device; then - return 3 - fi - else - false - fi - fi - - return 0 -} - - -## Cleanup all dedicated tunnel devices -ipv6_cleanup_tunnel_devices() { - local fn="ipv6_cleanup_tunnel_devices" - - ipv6_test testonly || return 2 - - # Find still existing tunnel devices and shutdown and delete them - - /sbin/ip tunnel show | awk -F: '/\<ipv6\/ip\>/ { print $1 }' | while read device; do - ipv6_del_tunnel_device $device - done - - return 0 -} - - -## Get address of a dedicated tunnel -# $1: <Interface> -# $2: local|remote : local or remote address -# stdout: <IPv4 address> if available -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_get_ipv4addr_of_tunnel() { - local fn="ipv6_get_local_ipv4_of_tunnel" - - local device=$1 - local selection=$2 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$selection" ]; then - net_log $"Missing parameter 'selection' (arg 2)" err $fn - return 1 - fi - if [ "$selection" != "local" -a "$selection" != "remote" ]; then - net_log $"Unsupported selection '$selection' specified (arg 2)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - ipv6_test_device_status $device - - if [ $? != 0 -a $? != 11 ]; then - # Device doesn't exist - return 3 - fi - - # Device exists, retrieve address - if [ "$selection" = "local" ]; then - local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $6 }')" - elif [ "$selection" = "remote" ]; then - local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $4 }')" - fi - - if [ $? != 0 ]; then - return 3 - fi - - if [ "$tunnel_local_ipv4addr" = "any" ]; then - local tunnel_local_ipv4addr="0.0.0.0" - fi - - echo "$tunnel_local_ipv4addr" - - return 0 -} - - -## Get IPv4 address of a device -# $1: <Interface> -# stdout: <IPv4 address> if available -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem (more than one IPv4 address applied) -ipv6_get_ipv4addr_of_device() { - local fn="ipv6_get_ipv4addr_of_device" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test_device_status $device - - if [ $? != 0 -a $? != 11 ]; then - # Device doesn't exist - return 3 - fi - - # Device exists, retrieve the first address only - local ipv4addr="$(/sbin/ip -o -4 addr show dev $device | awk '{ print $4 }' | awk -F/ '{ print $1; exit }')" - - if [ $? != 0 ]; then - return 3 - fi - - if [ "$ipv4addr" = "any" ]; then - local ipv4addr="0.0.0.0" - fi - - echo "$ipv4addr" - - return 0 -} - - -## Set IPv6 MTU for a device -# $1: <Interface> -# $2: <IPv6 MTU> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_set_mtu() { - local fn="ipv6_set_mtu" - - local device=$1 - local ipv6_mtu=$2 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$ipv6_mtu" ]; then - net_log $"Missing parameter 'IPv6 MTU' (arg 2)" err $fn - return 1 - fi - - # Check range - if [ $ipv6_mtu -lt 1280 -o $ipv6_mtu -gt 65535 ]; then - net_log $"Given IPv6 MTU '$ipv6_mtu' is out of range" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - # Set value - /sbin/ip link set dev $device mtu $ipv6_mtu - - return 0 -} - - -## Set a default route -# $1: <IPv6 address> : gateway, can also contain scope suffix (device name), cause a warning if not matching with $2 (but will have precedence) -# $2: <gateway device>: gateway device (optional in case of $1 is a global address or $1 contains scope suffix) -# $3: <check device>: (optional) device to check scope and gateway device against (setup is skipped, if not matching) -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_set_default_route() { - local fn="ipv6_set_default_route" - - local address=$1 - local device=$2 - local device_check=$3 - - ipv6_test testonly || return 2 - - # Map the unspecified address to nothing - if [ "$address" = "::" ]; then - local address="" - fi - - if [ -n "$address" ]; then - local addressgw=${address%%%*} - local device_scope=$(echo $address | awk -F% '{ print $2 }') - - if [ -z "$addressgw" ]; then - net_log $"Given IPv6 default gateway '$address' is not in proper format" err $fn - return 3 - fi - - # Scope device has precedence - if [ -n "$device_scope" -a -n "$device" -a "$device_scope" != "$device" ]; then - net_log $"Given IPv6 default gateway '$address' has scope '$device_scope' defined, given default gateway device '$device' will be not used" info $fn - local device="" - fi - - # Link local addresses require a device - if echo $addressgw | LC_ALL=C grep -qi "^fe80:"; then - if [ -z "$device_scope" ]; then - if [ -z "$device" ]; then - net_log $"Given IPv6 default gateway '$address' is link-local, but no scope or gateway device is specified" err $fn - return 3 - fi - fi - fi - - # Check whether the route belongs to the specific given interface - if [ -n "$device_check" ]; then - # Check whether scope device matches given check device - if [ -n "$device_scope" -a "$device_check" != "$device_scope" ]; then - # scope device != specific given -> skip - return 0 - elif [ -n "$device" -a "$device_check" != "$device" ]; then - # gateway device != specific given -> skip - return 0 - fi - fi - - # Set device now, if not given - if [ -z "$device" ]; then - local device="$device_scope" - fi - - if [ -z "$device" ]; then - # Note: this can cause a warning and a not installed route, if given address is not reachable on the link - ipv6_add_route ::/0 $addressgw - else - ipv6_add_route ::/0 $addressgw $device - fi - elif [ -n "$device" ]; then - # Check whether the route belongs to the specific given interface - if [ -n "$device_check" -a "$device_check" != "$device" ]; then - # gateway device != specific given -> skip - return 0 - fi - - ipv6_test_route_requires_next_hop $device - local result=$? - - if [ $result = 0 ]; then - net_log $"Given IPv6 default device '$device' requires an explicit nexthop" err $fn - return 3 - elif [ $result != 10 ]; then - net_log $"Given IPv6 default device '$device' doesn't exist or isn't up" err $fn - return 3 - fi - - ipv6_add_route ::/0 :: $device - else - net_log $"No parameters given to setup a default route" err $fn - return 3 - fi - - return 0 -} - - -## Resolve need of explicit next hop for an interface -# $1: <Interface> -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem 10=needs no explicit hop -ipv6_test_route_requires_next_hop() { - local fn="ipv6_test_route_requires_next_hop" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - ipv6_test_device_status $device - - if [ $? != 0 ]; then - return 3 - fi - - if [ "$device" = "sit0" ]; then - return 10 - fi - - if /sbin/ip -o link show $device 2>/dev/null | LC_ALL=C grep -q "POINTOPOINT"; then - return 10 - fi - - return 0 -} - - -## Trigger radvd -# $1: up|down : device reason for triggering (coming up or going down) -# $2: [startstop|restart|reload|SIGHUP] : triger mechanism (default is "SIGHUP") -# "startstop" : reason=up -> start, reason=down -> stop -# $3: [<filename>] : alternative pid file [optional] -# return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem -ipv6_trigger_radvd() { - local fn="ipv6_trigger_radvd" - - local reason=$1 - local mechanism=$2 - local pidfile=$3 - - if [ -z "$reason" ]; then - net_log $"No reason given for sending trigger to radvd" err $fn - return 1 - fi - - if [ "$reason" != "up" -a "$reason" != "down" ]; then - net_log $"Unsupported reason '$reason' for sending trigger to radvd" err $fn - return 1 - fi - - if [ -z "$mechanism" ]; then - # Take default - local mechanism="SIGHUP" - fi - - if [ -z "$pidfile" ]; then - local pidfile="/run/radvd/radvd.pid" - fi - - # Print message and select action - case $mechanism in - 'startstop') - case $reason in - up) - local action="start" - ;; - down) - local action="stop" - ;; - esac - ;; - 'reload'|'restart'|'SIGHUP') - local action="$mechanism" - ;; - *) - net_log $"Unsupported mechanism '$mechanism' for sending trigger to radvd" err $fn - return 3 - ;; - esac - - # PID file needed? - if [ "$action" = "SIGHUP" ]; then - if ! [ -f "$pidfile" ]; then - if [ "$reason" = "down" ]; then - # be quiet because triggering may have been disabled - true - else - net_log $"Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd" err $fn - fi - return 3 - fi - - # Get PID - local pid="$(cat $pidfile)" - if [ -z "$pid" ]; then - # pidfile empty - strange - net_log $"Pidfile '$pidfile' is empty, cannot send trigger to radvd" err $fn - return 3 - fi - fi - - - # Do action - case $action in - 'SIGHUP') - kill -HUP $pid - ;; - 'reload'|'restart'|'stop'|'start') - if ! /sbin/chkconfig --list radvd >/dev/null 2>&1; then - if [ "$reason" = "down" ]; then - # be quiet because triggering may have been disabled - true - else - net_log $"radvd not (properly) installed, triggering failed" err $fn - fi - return 3 - else - /sbin/service radvd $action >/dev/null 2>&1 - fi - ;; - *) - # Normally not reached, "action" is set above to proper value - ;; - esac - - return 0 -} - -#https://www.vaspects.com/2013/12/11/services-dont-bind-to-ipv6-address/ -ipv6_wait_tentative() { - local fn="ipv6_wait_tentative" - local device=$1 - local countdown=30 - local ip_output="" - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - [ "$device" = lo ] && return 0 - - while [ ${countdown} -gt 0 ]; do - ip_output="$(ip -6 addr show dev ${device} scope global tentative)" - - if [ -z "$ip_output" ]; then - return 0; - elif echo "$ip_output" | grep "dadfailed" > /dev/null; then - net_log $"Duplicate Address Detection: Duplicate addresses detected" err $fn - net_log $"Duplicate Address Detection: Please, fix your network configuration" err $fn - return 1 - fi - - net_log $"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' state" info $fn - sleep 1 - countdown=$(($countdown - 1)) - done - - ip_output="$(ip -6 addr show dev ${device} scope global tentative)" - - if [ -n "$ip_output" ]; then - net_log $"Some IPv6 address(es) of ${device} remain still in 'tentative' state" warning $fn - net_log $"Run 'ip -6 addr show dev ${device} scope global tentative' to see more" warning $fn - fi - - return 0 -} |