diff options
author | Bill Nottingham <notting@redhat.com> | 2003-01-31 21:28:49 +0000 |
---|---|---|
committer | Bill Nottingham <notting@redhat.com> | 2003-01-31 21:28:49 +0000 |
commit | ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2 (patch) | |
tree | 28aed9a16cd4d9890d268fa039bdf1e03796ef70 /sysconfig.txt | |
parent | 8c3dbdebbec6c2eb636b8a5654a5adbb99592716 (diff) | |
download | initscripts-ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2.tar initscripts-ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2.tar.gz initscripts-ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2.tar.bz2 initscripts-ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2.tar.xz initscripts-ff69fd0f08a9e0d9c28a3345076dd947e1de6bf2.zip |
802.1Q VLAN support (<tis@foobar.fi>, #82593)r7-05
Diffstat (limited to 'sysconfig.txt')
-rw-r--r-- | sysconfig.txt | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/sysconfig.txt b/sysconfig.txt index 879de70e..1df63156 100644 --- a/sysconfig.txt +++ b/sysconfig.txt @@ -168,6 +168,7 @@ Files in /etc/sysconfig GATEWAY=<gateway IP> GATEWAYDEV=<gateway device> (e.g. eth0) NISDOMAIN=<nis domain name> + VLAN=yes|no IPX=yes|no IPXAUTOPRIMARY=on|off (note, that MUST be on|off, not yes|no) IPXAUTOFRAME=on|off (again, not yes|no) @@ -622,6 +623,22 @@ Files in /etc/sysconfig/network-scripts/ To properly set these, use the packet socket interface. + Ethernet 802.1q VLAN items: + DEVICE=eth0.42 + Initscripts use DEV_PLUS_VID_NO_PAD naming mode for VLAN + devices. + Example: eth0.42 for vlan 42 on device eth0. + Valid VLAN ID range is 0-4095. Most ethernet switches reserve + VLAN ID 1 to be used as management VLAN; starting from VLAN + ID 2 is recommended. + REORDER_HDR=yes|no + When enabled the VLAN device will move the ethernet header + around to make it look exactly like a real ethernet device. + This may help programs such as ISC dhcpd which read the raw + ethernet packet and make assumptions about the location of + bytes. If you don't need it turn it off because there + is a small performance penalty. Default is on. + PPP/SLIP items: PERSIST=yes|no MODEMPORT=<device, say /dev/modem> |