Repository scheme updated to new layout

  NOTE: This commit just moves files around, without actually fixing the
        Makefiles and specfile. See follow up commits which resolve this.

1 files changed, 0 insertions, 1083 deletions

diff --git a/sysconfig.txt b/sysconfig.txt
deleted file mode 100644
index df4f789a..00000000
--- a/sysconfig.txt
+++ /dev/null
@@ -1,1083 +0,0 @@
-
-=======================
-
-Generic options:
-
-/etc/sysconfig/*
-
-   CGROUP_DAEMON=
-     List of control groups that the daemon will be run in. For example,
-     CGROUP_DAEMON="cpu:daemons cpuacct:/" will run it in the daemons
-     group for the CPU controller, and the '/' group for the CPU accounting
-     controller.
-
-/etc/sysconfig/authconfig
-
-  used by authconfig to store information about the system's user
-  information and authentication setup; changes made to this file
-  have no effect until the next time authconfig is run
-
-    USEHESIOD=no
-      Whether or not the hesiod naming service is in use.  If not set,
-      authconfig examines the passwd setting in /etc/nsswitch.conf.
-    USELDAP=no
-      Whether or not LDAP is used as a naming service.  If not set,
-      authconfig examines the passwd setting in /etc/nsswitch.conf.
-    USENIS=no
-      Whether or not NIS is in use.  If not set, authconfig examines
-      the passwd setting in /etc/nsswitch.conf.
-
-    USEKERBEROS=no
-      Whether or not Kerberos is in use.  If not set, authconfig examines
-      the settings in /etc/pam.d/system-auth.
-    USELDAPAUTH=no
-      Whether or not LDAP is being used for authentication.  If not set,
-      authconfig examines the settings in /etc/pam.d/system-auth.  Note
-      that this option is separate from USELDAP, and that neither implies
-      the other.
-    USEMD5=no
-      Whether or not MD5-based hashing should be used when setting passwords.
-      If not set, authconfig examines the settings in /etc/pam.d/system-auth.
-      This option affects authentication using both local files and LDAP.
-    USESHADOW=no
-      Whether or not shadow passwords are in use.  If not set, authconfig
-      checks for the existence of /etc/shadow.
-    USESMBAUTH=no
-      Whether or not SMB authentication is in use.  If not set, authconfig
-      examines the settings in /etc/pam.d/system-auth.
-
-/etc/sysconfig/autofsck
-
-  does not normally exist; if it does, it can influence a choice
-  whether or not to fsck after a crash
-
-    AUTOFSCK_DEF_CHECK=no
-      If the user does not respond, choose whether or not to fsck
-    AUTOFSCK_SINGLEUSER=
-      If this is set, drop to single user mode before fsck.
-    
-/etc/sysconfig/clock:
-
-  Current releases use the third parameter in the /etc/adjtime
-  file (either 'UTC' or 'LOCAL') to determine whether the hwclock
-  is in UTC or localtime.
-  
-  ZONE="filename" indicates the zonefile under /usr/share/zoneinfo
-     that /etc/localtime is a copy of, for example:
-     ZONE="US/Eastern"
-
-  deprecated values from earlier releases:
-
-    CLOCKMODE=GMT indicates that the clock is set to UTC
-    CLOCKMODE=ARC on alpha only indicates the ARC console's
-      42-year time offset is in effect
-    UTC=true,yes
-      Indicates that the hardware clock is set to UTC.
-    UTC=no,false
-      Indicates that the hardware clock is set to Local Time.
-    ARC=true on alpha only indicates the ARC console's
-      42-year time offset is in effect; otherwise the normal
-      Unix epoch is assumed.
-      
-    SRM=true on alpha only indicates the SRM 1900 epoch is in
-      effect; otherwise the normal Unix epoch is assumed.
-    
-/etc/sysconfig/init:
-
-  BOOTUP=<some bootup mode>
-     BOOTUP=graphical means use X Windows graphical boot up
-     BOOTUP=color means colorized text mode boot display. 
-     BOOTUP=verbose means old style display
-     Anything else means simplified display, but without color or ANSI-formatting
-  LOGLEVEL=<a number>
-     Sets the initial console logging level for the kernel.
-     The default is 7. 8 means everything (including debugging);
-     1 means nothing except kernel panics. syslogd will override
-     this once it starts.
-  RES_COL=<a number>
-     Column of the screen to start status labels at. Defaults to 60
-  MOVE_TO_COL=<a command>
-     A command to move the cursor to $RES_COL. Defaults to nasty
-     ANSI sequences output by echo -e.
-  SETCOLOR_SUCCESS=<a command>
-     A command to set the color to a color indicating success.
-     Defaults to nasty ANSI sequences output by echo -e setting
-     the color to green.
-  SETCOLOR_FAILURE=<a command>
-     A command to set the color to a color indicating failure.
-     Defaults to nasty ANSI sequences output by echo -e setting
-     the color to red.
-  SETCOLOR_WARNING=<a command>
-     A command to set the color to a color indicating warning.
-     Defaults to nasty ANSI sequences output by echo -e setting
-     the color to yellow.
-  SETCOLOR_NORMAL=<a command>
-     A command to set the color to 'normal'. Defaults to nasty
-     ANSI sequences output by echo -e.
-  PROMPT=yes|no
-     Set to 'yes' to enable the key check for interactive mode as well as
-     asking if a filesystem check should be done. Default is 'no' and
-     the kernel command line option "forcefsck" can be used to check the
-     filesystems and "confirm" can be used to enable interactive startup
-     questions.
-
-  obsoleted values from earlier releases:
-
-    MAGIC_SYSRQ=yes|no
-       Setting this to 'no' used to disable the magic sysrq key and
-       Stop-A (break on serial console) on SPARC. This setting has been
-       moved into kernel.sysrq and kernel.stop-a settings respectively in
-       sysctl.d/00-system.conf. Setting either of them there to 0 disables
-       it, setting it to 1 enables it.
-    STOP_A=yes|no
-       Setting this to 'no' used to disable the Stop-A (break on
-       serial console) key on SPARC.
-       This setting has been moved into kernel.stop-a setting in
-       sysctl.d/00-system.conf. Setting it there to 0 disables it,
-       setting it to 1 enables it. The setting should be present
-       on SPARC only.
-
-/etc/sysconfig/keyboard:
-
-  KEYTABLE=<keytable file>
-     for example: KEYTABLE="/usr/lib/kbd/keytables/us.map"
-    
-     If you dump a keymap (using 'dumpkeys') to
-	/etc/sysconfig/console/default.kmap
-     it will be loaded on bootup before filesystems are mounted/checked.
-     This could be useful if you need to emergency type the root password.
-     This has to be a dumped keymap, as opposed to copying the shipped
-     keymap files, as the shipped files include other maps from the
-     /usr/lib/kbd/keytables directory.
-     
-  KEYBOARDTYPE=sun|pc
-    on SPARC only, sun means a sun keyboard is attached on /dev/kbd,
-    pc means a PS/2 keyboard is on ps/2 port.
-  
-/etc/sysconfig/mouse:
-
-  MOUSETYPE=microsoft|mouseman|mousesystems|ps/2|msbm|logibm|atibm|
-    logitech|mmseries|mmhittab
-  XEMU3=yes|no (emulate three buttons with two buttons whenever
-    necessary, most notably in X)
-  DEVICE=<a device node> (the device of the mouse)
-
-  In addition, /dev/mouse points to the mouse device.
-
-/etc/sysconfig/network:
-
-  NETWORKING=yes|no
-  GATEWAY=<gateway IP>
-  GATEWAYDEV=<gateway device to use, when multiple devices have GATEWAY=> (e.g. eth0)
-  NISDOMAIN=<nis domain name>
-  NOZEROCONF=
-    Set this to not set a route for dynamic link-local addresses.
-
-  NETWORKDELAY=<delay in seconds>
-    Delay in seconds after all network interfaces are initialized.  Useful if
-    network has spanning tree running and must wait for STP convergence.
-    Default: 0 (no delay)
-
-  IFDOWN_ON_SHUTDOWN=yes|no
-    If yes, do bring interfaces down during system shutdown. If no, leave them
-    in their current state (this is only supported on hosts using systemd).
-    Default: yes (bring interfaces down)
-
-
-  IPV6FORWARDING=yes|no
-    Enable or disable global forwarding of incoming IPv6 packets 
-    on all interfaces.
-    Note: Actual packet forwarding cannot be controlled per-device, use netfilter6 for such issues
-    Default: no
-
-  IPV6_AUTOCONF=yes|no
-    Sets the default for device-based autoconfiguration.
-    Default: yes if IPV6FORWARDING=no, no if IPV6FORWARDING=yes
-  IPV6_ROUTER=yes|no
-    Sets the default for device-based Host/Router behaviour.
-    Default: yes if IPV6FORWARDING=yes, no if IPV6FORWARDING=no
-  IPV6_AUTOTUNNEL=yes|no
-    Controls automatic IPv6 tunneling.
-    Default: no
-
-  IPV6_DEFAULTGW=<IPv6 address[%interface]> (optional)
-    Add a default route through specified gateway
-    An interface can be specified: required for link-local addresses
-    Examples:
-      IPV6_DEFAULTGW="3ffe:ffff:1234:5678::1"
-        Add default route through 3ffe:ffff:1234:5678::1
-      IPV6_DEFAULTGW="3ffe:ffff:1234:5678::1%eth0"
-        Add default route through 3ffe:ffff:1234:5678::1 and device eth0
-      IPV6_DEFAULTGW="fe80::1%eth0"
-        Add default route through fe80::1 and device eth0
-
-  Note: if IPV6_DEFAULTGW is specified with %interface scope and it
-        doesn't match IPV6_DEFAULTDEV, IPV6_DEFAULTDEV is ignored.
-  Note: it's preferred to use %interface for all addresses, not
-        just link-local if you have multiple IPv6-enabled interfaces.
-
-  IPV6_DEFAULTDEV=<interface> (optional)
-    Add a default route through specified interface without specifying next hop
-    Type of interface will be tested whether this is allowed
-    Examples:
-      IPV6_DEFAULTDEV="eth0" INVALID example!
-      IPV6_DEFAULTDEV="ppp0"
-      IPV6_DEFAULTDEV="sit1"
-    Examples for 6to4
-      IPV6_DEFAULTDEV="tun6to4"
-        Add default route through dedicated 6to4 tunnel device "tun6to4", if configured
-
-  Note: "tun6to4" does not support an additional IPV6_DEFAULTGW.
-        Other interfaces prefer IPV6_DEFAULTGW, if specified.
-
-  IPV6_RADVD_PIDFILE=<pid-file> (optional)
-    Location of PID file for controlling radvd, see IPV6_CONTROL_RADVD
-    Default: "/run/radvd/radvd.pid"
-    Example:
-       IPV6_RADVD_PIDFILE="/some/other/location/radvd.pid"
-  IPV6TO4_RADVD_PIDFILE=<pid-file> (obsolete)
-    As above, still supported for a while for backward compatibility.
-  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP (optional)
-    How to trigger radvd in case of 6to4 or PPP action
-     startstop: radvd starts if interface goes up and stops
-       if interface goes down using initscript call of radvd with related parameter
-     reload|restart: initscript of radvd is called with this parameter
-     SIGHUP: signal HUP is sent to radvd, pidfile must be specified, if not the default
-    Default: SIGHUP
-
-  IPv6 options above can be overridden in interface-specific configuration.
-
-  obsoleted values from earlier releases:
-
-    FORWARD_IPV4=yes|no
-      Create a new file in /etc/sysctl.d/ with the net.ipv4.ip_forward
-      setting instead. Setting it to 1 there enables IP forwarding,
-      setting it to 0 disables it (which is the default for RFC compliance).
-
-    NETWORKWAIT=yes|no
-      This is not used with the move to systemd.
-
-    HOSTNAME=<fqdn by default, but whatever hostname you want>
-      This is now configured in /etc/hostname.
-
-/etc/sysconfig/static-routes-ipv6:
-  Contains lines of the form:
-
-    <device> IPv6-network IPv6-gateway
-    <tunneldevice> IPv6-network
-
-  <device> must be a device name to have the route brought up and
-  down with the device
-
-  For example:
-  
-  eth0   fec0:0:0:2::/64                         fec0:0:0:1:0:0:0:20
-   adds a route for IPv6 network fec0:0:0:2::/64 through fec0:0:0:1:0:0:0:20
-   
-  eth0    2000::/3	                         3ffe:ffff:0:1::1
-   so-called "default" routes for clients
-
-  sit1    2000::/3
-   adds routes through dedicated tunnel interface sit1
-
-  tun6to4  3ffe:ffff:1234::/56			
-   adds routes through hardwired 6to4 tunnel interface tun6to4
-  tun6to4  3ffe:ffff:5678::/56			::5.6.7.8
-   adds routes through hardwired 6to4 tunnel interface tun6to4,
-   specifying next hop   
-
-  Notes:
-    * default routes (such as the "2000::/3" shown above) should be set with
-       IPV6_DEFAULTGW and IPV6_DEFAULTDEV, see more above.
-    * tunnel device "sit0" is not supported here, routes will never be applied
-
-/etc/sysconfig/routed:
-
-  SILENT=yes|no
-  EXPORT_GATEWAY=yes|no
-  
-/etc/sysconfig/rawdevices:
-
-  This is used for setting up raw device to block device mappings.
-  It has the format:
-  	<rawdev> <major> <minor>
-        <rawdev> <blockdev>
-  For example: 
-     /dev/raw/raw1 /dev/sda1
-     /dev/raw/raw2 8 5
-
-/etc/sysconfig/pcmcia:
-
-  PCMCIA=yes|no
-  PCIC=i82365|tcic
-  PCIC_OPTS=<socket driver (i82365 or tcic) timing parameters>
-  CORE_OPTS=<pcmcia_core options>
-  CARDMGR_OPTS=<cardmgr options>
-
-/etc/sysconfig/amd:
-
-  ADIR=/.automount  (normally never changed)
-  MOUNTPTS='/net /etc/amd.conf'  (standard automount stuff)
-  AMDOPTS=  (extra options for AMD)
-
-/etc/sysconfig/tape:
-
-  DEV=/dev/nst0
-    Tape device.  Use the non-rewinding one for these scripts.
-  
-    For SCSI tapes this is /dev/nst#, where # is the number of the
-    tape drive you want to use.  If you only have one then use
-    nst0.
- 
-    For IDE tapes you use /dev/ht#, where # is the number of the tape
-    drive you want to use (usually ht0).
- 
-    For floppy tape drives use /dev/ftape.
-
-  ADMIN=root
-    Person to mail to if the backup fails for any reason
-
-  SLEEP=5
-    Time to sleep between tape operations.  Some drives need a bit
-    more than others, but 5 seems to work for 8mm, 4mm, and DLT
-
-  BLOCKSIZE=32768
-    This worked fine for 8mm, then 4mm, and now DLT.  An optimal
-    setting is probably however much data your drive writes at one
-    time.
-
-  SHORTDATE=$(date +%y:%m:%d:%H:%M)
-    A short date string, used in backup log filenames.
-
-  DAY=$(date +log-%y:%m:%d)
-    This is used for the log file directory.
-
-  DATE=$(date)
-    Regular date string, used in log files.
-
-  LOGROOT=/var/log/backup
-    Root of the logging directory
-
-  LIST=$LOGROOT/incremental-list
-    This is the file name the incremental backup will use to store
-    the incremental list.  It will be $LIST-{some number}.
-
-  DOTCOUNT=$LOGROOT/.count
-    For counting as you go to know which incremental list to use
-
-  COUNTER=$LOGROOT/counter-file
-    For rewinding when done...might not use.
-
-  BACKUPTAB=/etc/backuptab
-    The file in which we keep our list of backup(s) we want to make.
-
-/etc/sysconfig/saslauthd:
-
-  used by the saslauthd init script (part of the cyrus-sasl package) to
-  control which arguments are passed to saslauthd at startup time; changes
-  made to this file have no effect until saslauthd is restarted
-
-  MECH=shadow
-    controls which data source saslauthd will consult when checking user
-    passwords; run 'saslauthd -v' to get a full list of available
-    authentication mechanisms
-  SOCKETDIR=/run/saslauthd
-    controls in which directory saslauthd will be directed to create its
-    listening socket; any change to this value will require a corresponding
-    change in client configuration files
-
-/etc/sysconfig/sendmail:
-  DAEMON=yes|no
-    yes implies -bd (i.e., listen on port 25 for new mail)
-  QUEUE=1h
-    given to sendmail as -q$QUEUE
-    -q option is not given to sendmail if /etc/sysconfig/sendmail
-    exists and QUEUE is empty or undefined.
-
-/etc/locale.conf
-
-  A configutration file for locale settings. See locale.conf(5) for
-  more details. 
-
-  LANG= set locale for all categories, can be any two letter ISO
-    language code
-  LC_CTYPE= locale data configuration for classification and conversion
-    of characters
-  LC_COLLATE= locale data configuration for collation (sort order) of
-    strings
-  LC_MESSAGES= locale data configuration for translation of messages
-  LC_NUMERIC= locale data configuration for non-monetary numeric data
-  LC_MONETARY= locale data configuration for monetary data
-  LC_TIME= locale data configuration for date and time
-  LC_ALL= locale data configuration overriding all of the above
-  LANGUAGE= can be a : separated list of ISO language codes
-  LINGUAS= can be a ' ' separated list of ISO language codes
-
-  The above variables are used in /etc/profile.d/lang.sh.
-
-  If ~/.i18n exists, it is used in addition to /etc/locale.conf and
-  for per-user customization of the locales.
-
-/etc/vconsole.conf:
-
-  SYSFONT= Console font. Fonts are found in /lib/kbd/consolefonts.
-
-  UNIMAP= Unicode font map. Most fonts have these built-in. Font maps
-  can be found in /lib/kbd/unimaps. These are applied via setfont's
-  -u option.
- 
-  SYSFONTACM= Console map. These are applied via setfont's -m option,
-  and are found in /lib/kbd/consoletrans.
- 
-  The above are used to set up the keyboard at boot time. For more
-  information, see vconsole.conf(5).
-
-Files in /etc/sysconfig/network-scripts/
-========================================
-
-/etc/sysconfig/network-scripts/ifup:
-/etc/sysconfig/network-scripts/ifdown:
-
-  Symlinks to /sbin/ifup and /sbin/ifdown, respectively.
-  These are the only two scripts "in" this directory that should
-  be called directly; these two scripts call all the other
-  scripts as needed.  These symlinks are here for legacy purposes --
-  only /sbin/ifup and /sbin/ifdown should currently be used
-  at the user level.
-
-  These scripts take one argument normally: the name of the device
-  (e.g. eth0).  They are called with a second argument of "boot"
-  during the boot sequence so that devices that are not meant to
-  be brought up on boot (ONBOOT=no, see below) can be ignored at
-  that time.
-
-  Also, interfaces may be brought up via the hotplug scripts;
-  in this case, HOTPLUG=no needs to be set to no to avoid this.
-  This is useful e.g. to prevent bonding device activation by merely
-  loading the bonding kernel module.
-
-/etc/sysconfig/network-scripts/init.ipv6-global:
-  Not really a public file.  Contains different basic settings that
-  are set from /etc/[rc.d]/init.d/network at different stages of
-  network initialization.
-
-/etc/sysconfig/network-scripts/network-functions:
-
-  Not really a public file.  Contains functions which the scripts use
-  for bringing interfaces up and down.  In particular, it contains
-  most of the code for handling alternative interface configurations
-  and interface change notification through netreport.
-
-/etc/sysconfig/network-scripts/network-functions-ipv6:
-
-  Not really a public file.  Contains functions which the scripts use
-  for bringing IPv6 on interfaces up and down, like addresses, routes,
-  forwarding handling and static or automatic tunneling.
-
-/etc/sysconfig/network-scripts/ifcfg-<interface-name> and
-/etc/sysconfig/network-scripts/ifcfg-<interface-name>:<alias-name>:
-
-  The first defines an interface, and the second contains
-  only the parts of the definition that are different in a
-  "alias" (or alternative) interface.  For example, the
-  network numbers might be different, but everything else
-  might be the same, so only the network numbers would be
-  in the alias file, but all the device information would
-  be in the base ifcfg file.
-
-  The items that can be defined in an ifcfg file depend on the
-  interface type.  The really obvious ones I'm not going to
-  bother to define; you can figure out what "IPADDR" is, I
-  think...  :-)
-
-  Base items:
-    NAME=<friendly name for users to see>
-      Most important for PPP.  Only used in front ends.
-    DEVICE=<name of physical device (except dynamically-allocated PPP
-      devices where it is the "logical name")>
-    IPADDRn=
-    PREFIXn=
-      Network prefix.  It is used for all configurations except aliases
-      and ippp devices.  It takes precedence over NETMASK when both
-      PREFIX and NETMASK are set.
-    NETMASKn=
-      Subnet mask; just useful for aliases and ippp devices.  For all other
-      configurations, use PREFIX instead.
-
-    The "n" is expected to be consecutive positive integers starting from 0.
-    It can be omitted if there is only one address being configured.
-
-    GATEWAY=
-    METRIC=
-      Metric for the default route using GATEWAY
-    ONBOOT=yes|no (not valid for alias devices; use ONPARENT)
-    HOTPLUG=yes|no
-    USERCTL=yes|no
-    BOOTPROTO=none|bootp|dhcp
-      'bootp' or 'dhcp' cause a DHCP client to run on the device. Any other
-      value causes any static configuration in the file to be applied.
-    VLAN=yes|no
-    MTU=
-      Default MTU for this device
-    WINDOW=
-      Default window for routes from this device
-    PEERDNS=yes|no
-      modify /etc/resolv.conf if peer uses msdns extension (PPP only) or
-      DNS{1,2} are set, or if using dhclient. default to "yes".
-    DNS{1,2}=<ip address>
-      provide DNS addresses that are dropped into the resolv.conf
-      file if PEERDNS is not set to "no".
-    SCOPE=
-      Set to "scope SCOPE-ID" to set a non-default scope for a statically
-      configured IP address.
-    SRCADDR=
-      use the specified source address for outgoing packets
-    HWADDR=
-      ethernet hardware address for this device
-    MACADDR=
-      Set the hardware address for this device to this.
-      Use of this in conjunction with HWADDR= may cause
-      unintended behavior.
-    NOZEROCONF=
-      Set this to not set a route for dynamic link-local addresses
-      over this device.
-    PERSISTENT_DHCLIENT=yes|no|1|0
-      Without this option, or if it is 'no'/'0', and BOOTPROTO=dhcp,
-      dhclient is run for the interface in "one-shot" mode; if the 
-      dhcp server does not respond for a configurable timeout, then
-      dhclient exits and the interface is not brought up - 
-      the '-1' option is given to dhclient.
-      If PERSISTENT_DHCLIENT=yes, then dhclient will keep on trying
-      to contact the dhcp server when it does not respond - no '-1'
-      option is given to dhclient. Note: this disables the automatic
-      checking for the presence of a link before starting dhclient.
-    DHCPRELEASE=yes|no|1|0
-      With this option set to 'yes' (1), when a dhcp configured
-      interface is brought down with 'ifdown', the lease will be
-      released. Otherwise, leases are not released.
-
-    NO_DHCP_HOSTNAME=yes|no|1|0
-      Tells initscripts to not obtain hostname from DHCP server in the ifup-post
-      phase. This option might be useful especially with static configuration of
-      the interface.
-    DHCP_SEND_HOSTNAME=yes|no|1|0
-      Tells initscripts whether the DHCP_HOSTNAME or DHCP_FQDN options (below)
-      should be sent to DHCP server.
-    DHCP_HOSTNAME=<hostname>
-      Sends the specified hostname to the DHCP server.
-    DHCP_FQDN=<fully.qualified.domain.name>
-      Sends the specified FQDN to the DHCP server.
-
-    Please note when both DHCP_HOSTNAME and DHCP_FQDN are specified,
-    only DHCP_FQDN will be used. (Same behaviour as with NetworkManager.)
-
-    DHCLIENT_IGNORE_GATEWAY=yes|no|1|0
-      If set to 'yes', it will cause dhclient-script to ignore any $GATEWAY
-      setting that may be in the ifcfg file for this interface.
-      Otherwise, the dhclient session which obtains an ip-address
-      on the same subnet as $GATEWAY will set the default route
-      to be via $GATEWAY, and no other dhclient session will set
-      the default route.
-    DHCLIENTARGS=
-      Any additional arguments to dhclient.
-    NM_CONTROLLED=yes|no
-      If set to 'no', NetworkManager will ignore this connection/device.
-      Defaults to 'yes'.
-    ZONE=
-      Network zone (trust level) of this connection.
-      If not set, default zone (specified in /etc/firewalld/firewalld.conf)
-      is used. To see all available zones, run 'firewall-cmd --get-zones'.
-    ARPCHECKn=yes|no
-      If set to 'no', ifup will not try to determine, if requested ip address
-      is used by other machine in network.
-      Defaults to 'yes'.
-    ARPUPDATE=yes|no
-      If set to 'no' the neighbours in current network will not be updated with
-      ARP information about this NIC. This is especially handy using LVS Load
-      Balancing with Direct Routing enabled.
-      Defaults to 'yes'.
-    IPV4_FAILURE_FATAL=yes|no
-      If set to yes, ifup-eth will end immediately after ipv4 dhclient fails.
-      Defaults to 'no'.
-
-  For dynamic addressing (BOOTPROTO=dhcp) only DEVICE needs to
-  be set; all the rest will be determined by the boot protocol.
-
-    IPV6_SET_SYSCTLS=yes|no
-      If set, network-scripts will attempt to set sysctls based on the setup
-      of the interface. For example, will try to set `accept_ra` for interfaces
-      where $IPV6_AUTOCONF is set to `yes`. Defaults to `yes`, set to `no` if you
-      want to manage these yourself.
-
-  Base items being deprecated:
-    NETWORK=<will be calculated automatically with ipcalc>
-    BROADCAST=<will be calculated automatically with ipcalc>
-
-  Alias specific items:
-    ONPARENT=yes|no
-      Whether to bring up the device when the parent device is brought
-      up.
-      Default: yes
-
-  IPv6-only items for real interfaces:
-    IPV6INIT=yes|no
-      Enable or disable IPv6 static, DHCP, or autoconf configuration for this interface
-      Default: yes
-    IPV6FORWARDING=yes|no
-      Enable or disable global forwarding of incoming IPv6 packets
-      Note: Obsolete in interface specification!
-      Default: no
-    IPV6ADDR=<IPv6 address>[/<prefix length>]
-      Specify a primary static IPv6 address here
-      Optional, if normal host and a router advertisement daemon is on local link
-      Required, if node is a router and interface should route packets
-      Note: if prefix length is omitted, 64 is assumed
-      Example:
-        IPV6ADDR="3ffe:ffff:0:5::1"
-        IPV6ADDR="3ffe:ffff:0:1::1/128"
-    IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
-      A list of secondary IPv6 addresses (e.g. useful for virtual hosting)
-      Example:
-        IPV6ADDR_SECONDARIES="3ffe:ffff:0:1::10 3ffe:ffff:0:2::11/128"
-    IPV6_MTU=<MTU of link> (optional)
-      Optional, dedicated MTU of this link
-      Note: Must be greater or equal to 1280.
-      Example:
-        IPV6_MTU="1280"
-    IPV6_PRIVACY=rfc3041
-      Enables RFC 3041 IPv6 privacy support if set.
-      Default: RFC 3041 support disabled
-    IPV6_FORCE_ACCEPT_RA=yes|no
-      By default network-scripts will set `accept_ra` only if $IPV6_AUTOCONF is
-      set to `yes`. If you don't want SLAAC addresses but do want to accept RA,
-      then set this to `yes`. Defaults to `no`.
-
-  Special configuration options for multi-homed hosts etc.
-	IPV6_ROUTER=yes|no: Controls IPv6 autoconfiguration
-	IPV6_AUTOCONF=yes|no: Controls IPv6 autoconfiguration
-	 Defaults:
-	  Global IPV6FORWARDING=yes: IPV6_AUTOCONF=no, IPV6_ROUTER=yes
-	  Global IPV6FORWARDING=no: IPV6_AUTOCONF=yes
-
-  Optional settings for a 6to4 tunnel
-    IPV6TO4INIT=yes|no
-      Enable or disable 6to4 tunneling setup
-      Default: no
-    IPV6TO4_RELAY=<IPv4 address> (optional)
-      IPv4 address of the remote 6to4 relay
-      Note: if this is omitted, ::192.88.99.1 (the anycast relay address) is chosen
-    IPV6TO4_IPV4ADDR=<IPv6 address>[/<prefix length>] (optional)
-      Overwrite local IPv4 address which is accessible from the Internet
-       (optional, in case of static IPv4-NAT behind a router or other special scenarios)
-    IPV6TO4_MTU=<MTU for IPv6> (optional)
-      Controls IPv6 MTU for the 6to4 tunnel
-      Note: Must be greater or equal to 1280
-      Example:
-        IPV6TO4_MTU="1280"
-      Default: MTU of master device - 20
-    IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ..." (optional)
-      A list of routing tokens to setup proper IPv6 interfaces on the LAN
-      Example:
-         IPV6TO4_ROUTING="eth0-:0004::1/64 eth1-:0005::1/64"
-         Will create one address per eth0 and eth1, taking given SLA
-
-  Optional settings for a 6to4 tunnel or a ppp link
-    IPV6_CONTROL_RADVD=yes|no (optional)
-      Enable signaling radvd that the 6to4 prefix has been changed or a
-       preconfigured dynamic device is up or down
-      Default: no
-
-  IPv6-only items for static tunnel interface:
-    Interface name: sitX (X => 1)
-    IPV6INIT=yes|no
-      Enable or disable IPv6 configuration for this interface
-      Default: no
-    IPV6TUNNELIPV4=<IPv4 address>
-      Specify IPv4 address of a foreign IPv6-in-IPv4 tunnel endpoint
-      Example:
-        IPV6TUNNELIPV4="1.2.3.4"
-    IPV6TUNNELIPV4LOCAL=<IPv4 address>
-      Specify local IPv4 address of tunnel, useful on interfaces with multiple IPv4 addresses
-    IPV6ADDR=<IPv6 address>[/<prefix length>] (optional)
-     local IPv6 address of a numbered tunnel
-    IPV6ADDR_SECONDARIES="<IPv6 address>[/<prefix length>] ..." (optional)
-      A list of secondary IPv6 addresses (example see above)
-    IPV6_MTU=<MTU of tunnel> (optional)
-      Optional, dedicated MTU of this tunnel
-      Note: Must be greater or equal to 1280
-      Example:
-        IPV6_MTU="1280"
-
-   IPv6-only option to enable DHCPv6 client:
-      DHCPV6C=yes|no
-      This will enable the DHCPv6 features of dhclient to be run for the interface.
-      See man dhclient(8) and dhclient.conf(5).
-      DHCPV6C_OPTIONS=...
-      This will pass given arguments to the DHCPv6 client.  For example,
-      "-S" option will request network information (e.g., DNS addresses)
-      only, not IPv6 addresses.
-
-  Ethernet-only items:
-    ARP=yes|no (adds 'arp' flag to ip, for use with the
-      ethertap device)
-    LINKDELAY=<time in seconds>
-      Time that the system should pause after the specific interface is
-      enabled.  This may be useful if one interface is connected to a
-      switch which has spanning tree enabled and must wait for STP to
-      converge before the interface should be considered usable.
-    BRIDGE=<br* device>
-      If set, the ethernet device is not assigned an address.  It is added to
-      the specified bridge device instead.
-    EXTRA_ROUTE_OPTS=<string of route options>
-      Extra options to add to the interface route. For example, let's say you
-      wanted an interface route to have an mtu of 1480, but wanted the
-      interface to still have a route of 1500, you could set "mtu 1480" here.
-      Anything here is appended to the `ip route add` or `ip route replace`
-      command.
-
-   Deprecated, but supported:
-    ETHTOOL_OPTS=...
-      Any device-specific options supported by ethtool. For example,
-      if you wanted to force 100Mb full duplex:
-        ETHTOOL_OPTS="speed 100 duplex full autoneg off"
-      Note that changing speed or duplex settings almost always
-      requires disabling autonegotiation with 'autoneg off'.
-
-      Multiple options can also be set like so :
-      ETHTOOL_OPTS="-K ${DEVICE} tso on; -G ${DEVICE} rx 256 tx 256"
-
-      Long term, this should be done by sysadmin-written udev rules.
-
-    No longer supported:
-     PROMISC=yes|no (enable or disable promiscuous mode)
-     ALLMULTI=yes|no (enable or disable all-multicast mode)
-     
-     To properly set these, use the packet socket interface.
-
-  Ethernet 802.1q VLAN items:
-     DEVICE=eth0.42
-       Initscripts use the device name for VLAN devices.
-               Example: eth0.42 for vlan 42 on device eth0.
-       Valid VLAN ID range is 0-4095. Most ethernet switches reserve
-       VLAN ID 1 to be used as management VLAN; starting from VLAN
-       ID 2 is recommended.
-     REORDER_HDR=yes|no
-       When enabled the VLAN device will move the ethernet header
-       around to make it look exactly like a real ethernet device.
-       This may help programs such as ISC dhcpd which read the raw
-       ethernet packet and make assumptions about the location of
-       bytes. If you don't need it turn it off because there
-       is a small performance penalty. Default is on.
-     GVRP=yes|no
-       When enabled, this will announce new vlan creation to a GVRP
-       enabled trunk port on a switch. Default is off.
-
-  PPP/SLIP items:
-    PERSIST=yes|no
-    MODEMPORT=<device, say /dev/modem>
-    LINESPEED=<speed, say 115200>
-    DEFABORT=yes|no (tells netcfg whether or not to put default
-      abort strings in when creating/editing the chat script and/or
-      dip script for this interface)
-      (meaningless with WVDIALSECT)
- 
-  PPP-specific items
-    WVDIALSECT=<list of sections from wvdial.conf to use>
-      If this variable is set, then the chat script (if it
-      exists) is ignored, and wvdial is used to open the
-      PPP connection.
-    DEFROUTE=yes|no (set this interface as default route? yes is default)
-    DEBUG=yes|no (defaults to yes)
-      turns on/off pppd and chat (if used) debugging.
-    ESCAPECHARS=yes|no (simplified interface here doesn't let people
-      specify which characters to escape; almost everyone can use
-      asyncmap 00000000 anyway, and they can set PPPOPTIONS to
-      asyncmap foobar if they want to set options perfectly)
-    HARDFLOWCTL=yes|no (yes implies "modem crtscts" options)
-    PPPOPTIONS=<arbitrary option string; is placed last on the
-      command line, so it can override other options like asyncmap
-      that were specified differently>
-    PPPOE_EXTRA = any extra arguments to pass to pppoe 
-    PPPD_EXTRA =  any extra arguments to pass to pppd 
-    PAPNAME=<"name $PAPNAME" on pppd command line> (note that
-      the "remotename" option is always specified as the logical
-      ppp device name, like "ppp0" (which might perhaps be the
-      physical device ppp1 if some other ppp device was brought
-      up earlier...), which makes it easy to manage pap/chap
-      files -- name/password pairs are associated with the
-      logical ppp device name so that they can be managed
-      together.
-    REMIP=<remote ip address, normally unspecified>
-    MTU=
-    MRU=
-    DISCONNECTTIMEOUT=<number of seconds, default currently 5>
-      (time to wait before re-establishing the connection after
-      a successfully-connected session terminates before attempting
-      to establish a new connection.)
-    RETRYTIMEOUT=<number of seconds, default currently 60>
-      (time to wait before re-attempting to establish a connection
-      after a previous attempt fails.)
-    RETRYCONNECT=yes|no (defaults to yes)
-      If this is yes, then we will re-run pppd if it exits with a 
-      "connect script failed" status.  Otherwise, only one attempt
-      is made to bring up the connection.  Note that some connect
-      scripts (for example, wvdial) might do their own retries (such
-      as BUSY or NO DIALTONE conditions).
-    MAXFAIL=<number>
-      If this is set, this will cause ppp-watch to exit after
-      the specified number of attempts.
-    DEMAND=yes|no
-      Switches on demand-dialing mode using pppd's "demand" option.
-    IDLETIMEOUT=600
-      The amount of time the link needs to be inactive before pppd will
-      bring it down automatically.
-    BOOTTIMEOUT=30
-      The amount of time to wait at boot before giving up on the
-      connection.
-
-  IPPP-specific items (ISDN)
-    PROVIDER=<ProviderName>
-	 USER=<Login>
-    PASSWORD=<Password>
-	 ENCAP=[syncppp|]
-    DIALMODE=[manual|auto]
-    SECURE=off|on
-	 MSN=<>
-	 PHONE_IN=<Callback.Number>
-	 	 AREACODE=<>
-	 REGIONCODE=<>
-	 PHONE_OUT=<PhoneNumber>
-    BUNDLING=off|on
-    HUPTIMEOUT=<number>
-    DNS1=<PrimaryDNS>
-    DNS2=<SecondaryDNS>
-    DOMAIN=""
-    LAYER=[HDLC|]
-    CALLBACK=off|on
-    CHARGEHUP=<number>
-    CHARGEINT=<number>
-    CBHUP=<number>
-    CBDELAY=<number>
-    DIALMAX=<number>
-    AUTH=[+pap] [-chap]
-    IHUP=<>
-    DELDEFAULTROUTE=[enabled|disabled]
-    CBCP=off|on
-    VJ=off|on
-    VJCCOMP=off|on
-    AC=off|on
-    PC=off|on
-    BSDCOMP=off|on
-    CCP=off|on
-    SLAVE_DEVICE=ippp[0-9]
-
-  ippp0 items being deprecated:
-    BOOT=[on|off] will be converted to ONBOOT=[yes|no] by netconf
-    LOCAL_IP=     will be converted to IPADDR by netconf
-    REMOTE_IP=    will be converted to GATEWAY by netconf
-
-  Wireless-specific items:
-    See iw(8) for additional information.
-    MODE=[Managed|Ad-Hoc|Monitor]
-    ESSID=
-      Required.
-    FREQ=
-      Required if MODE=Ad-Hoc.
-    KEY=<default WEP key>
-
-  IPSEC specific items
-     SRC=source address. Not required.
-     DST=destination address
-     TYPE=IPSEC
-     SRCNET=source net (for tunneling)
-     DSTNET=destination network (for tunneling)
-
-   Manual keying:
-
-     AH_PROTO{,_IN,_OUT}=protocol to use for AH (defaults to hmac-sha1)
-     ESP_PROTO{,_IN,_OUT}=protocol to use for ESP (defaults to 3des-cbc)
-     AESP_PROTO{,_IN,_OUT}=protocol to use for ESP authentication (defaults to
-	hmac-sha1)
-     KEY_AH{,_IN,_OUT}=AH key
-     KEY_ESP{,_IN,_OUT}=ESP encryption key
-     KEY_AESP{,_IN,_OUT}=ESP authentication key (optional)
-     SPI_{ESP,AH}_{IN,OUT}=SPIs to use
-
-   _IN and _OUT specifiers are for using different keys or protocols for
-   incoming and outgoing packets.  If neither _IN or _OUT variants are set for
-   protocols or keys, the same will be used for both.  Hexadecimal keys need to
-   be prefixed with "0x".
-
-   Automatic keying:
-
-     IKE_DHGROUP=<number> (defaults to 2)
-     IKE_METHOD=PSK|X509|GSSAPI
-         PSK=preshared keys (shared secret)
-         X509=X.509 certificates
-         GSSPI=GSSAPI authentication
-     IKE_AUTH=protocol to use for Phase 1 of SA (defaults to sha1)
-     IKE_ENC=protocol to use for Phase 1 of SA (defaults to 3des)
-     IKE_PSK=preshared key for this connection
-     IKE_CERTFILE=our certificate file name for X509 IKE
-       IKE_PEER_CERTFILE=peer public cert filename for X509 IKE
-       IKE_DNSSEC=retrieve peer public certs from DNS
-     (otherwise uses certificate information sent over IKE)
-
-     To manage the racoon configuration manually (e.g. when there is more than
-     one IPSEC configuration with the same DST), set KEYING=automatic and leave
-     all IKE_* parameters unspecified.
-
-     To override the identifier to use with a preshared key:
-
-       MYID_TYPE=address|fqdn|user_fqdn
-       MYID_VALUE=fqdn or user_fqdn string for this connection
-
-   Usage of AH or ESP may be disabled by setting {AH,ESP}_PROTO to "none".
-
-  Bonding-specific items
-
-    SLAVE=yes
-      Specifies device as a slave
-    MASTER=bondXX
-      Specifies master device to bind to
-    BONDING_OPTS=
-      A space-separated list of options to the bonding driver for this
-      interface, such as:
-
-      "mode=active-backup arp_interval=60 arp_ip_target=192.168.1.1,192.168.1.2"
-
-  Tunnel-specific items:
-    TYPE=GRE|IPIP|IPIP6|EXTERNAL
-      External is a mode for ip6_tunnel interfaces (that cannot be set on
-      the primary ip6tnl0 interface), which permits unwrapping encapsulated
-      packets regardless of their internal IP (v4 or v6) provided the inner
-      address is on the interface. Use $MY_INNER_IPADDR for v4 addresses. Use
-      $IPV6ADDR and $IPV6ADDR_SECONDARIES as usual for v6 addresses.
-    MY_INNER_IPADDR=local IP address of the tunnel interface
-    PEER_OUTER_IPADDR=IP address of the remote tunnel endpoint
-    MY_OUTER_IPADDR=IP address of the local tunnel endpoint
-      If unspecified, an IP address is selected automatically for outgoing
-      tunnel packets, and incoming tunnel packets are accepted on all local
-      IP addresses.
-    PEER_INNER_IPADDR=IP address of the remote end of the tunnel interface
-      If this is specified, a route to PEER_INNER_IPADDR through the tunnel
-      is added automatically.
-    TTL=TTL value for tunnel packets
-      Default is to use the TTL of the packet transported through the tunnel
-
-  Bridge-specific items:
-    TYPE=Bridge
-    STP=off|on (see 'brctl stp')
-    DELAY=forward delay time in seconds (see 'brctl setfd')
-    BRIDGING_OPTS=
-      A space-separated list of bridging options for either the bridge
-      device, or the port device, such as:
-
-      BRIDGING_OPTS="hello_time=200 priority=65535"
-        for bridge devices, or
-      BRIDGING_OPTS="hairpin_mode=1"
-        for port devices.
-
-  TUN/TAP-specific items:
-    OWNER=<owner of the device>
-
-/etc/sysconfig/network-scripts/chat-<interface-name>:
-
-  chat script for PPP or SLIP connection intended to establish
-  the connection.  For SLIP devices, a DIP script is written
-  from the chat script; for PPP devices, the chat script is used
-  directly.
-
-/etc/sysconfig/network-scripts/dip-<interface-name>
-
-  A write-only script created from the chat script by netcfg.
-  Do not modify this.  In the future, this file may disappear
-  by default and created on-the-fly from the chat script if
-  it does not exist.
-
-/etc/sysconfig/network-scripts/ifup-post
-
-  Called when any network device EXCEPT a SLIP device comes
-  up.  Calls /etc/sysconfig/network-scripts/ifup-routes to
-  bring up static routes that depend on that device.  Calls
-  /etc/sysconfig/network-scripts/ifup-aliases to bring up
-  aliases for that device.  Sets the hostname if it is not
-  already set and a hostname can be found for the IP for that
-  device.  Sends SIGIO to any programs that have requested
-  notification of network events.
-
-  Could be extended to fix up nameservice configuration, call
-  arbitrary scripts, etc, as needed.
-
-/etc/sysconfig/network-scripts/ifup-routes
-
-  Set up static routes for a device.
-
-/etc/sysconfig/network-scripts/ifup-aliases
-
-  Bring up aliases for a device.
-
-/etc/sysconfig/network-scripts/route-<interface-name>
-
-  Contains lines that specify additional routes that should be added when the
-  associated interface is brought up.
-
-  The files are processed by the ifup-routes script and uses the /sbin/ipcalc
-  utility for all network masks and numbers. Routes are specified using the
-  syntax:
-
-    ADDRESSn=<network>
-    NETMASKn=<network/prefix mask>
-    GATEWAYn=<next-hop router/gateway IP address>
-
-  The "n" is expected to be consecutive positive integers starting from 0.
-  For example:
-
-    ADDRESS0=192.168.2.0
-    NETMASK0=255.255.255.0
-    GATEWAY0=192.168.1.1
-
-  adds a network route to the 192.168.2.0 network via the gateway at
-  192.168.1.1. Since you must already have a route to the network of the
-  gateway, there is no need to specify a device.
-
-  Note: The ifup-routes script also supports an older syntax designed to be
-  used directly as an argument to "/sbin/ip route add".
-  If no "ADDRESSn" lines are found the following will still
-  work:
-  
-  192.168.2.0/24 dev ppp0
-  
-  adds a network route to the 192.168.2.0 network through ppp0.
-
-/etc/sysconfig/network-scripts/route6-<interface-name>
-
-  Contains lines that are arguments to "/sbin/ip -6 route add"
-  For example:
-
-  site-local route for network fec0:0:0:2::/64
-   via gateway fec0:0:0:1:0:0:0:20 (e.g. on eth0): 
-
-  fec0:0:0:2::/64 via fec0:0:0:1:0:0:0:20
-
-  additional prefix configured to be on-link on eth0:
-
-  3ffe:fffe:1:2::/64 dev eth0
-  
-  6to4 route for network 3ffe:ffff:1::/48, either:
-
-  3ffe:ffff:1::/48
-  3ffe:ffff:1::/48 via ::192.168.1.2
-
-  Note the special case of 6to4 interface: 'via [relay]' is 
-  automatically added if explicit 'via' wasn't specified.
-
-/etc/sysconfig/network-scripts/rule-<interface-name>
-/etc/sysconfig/network-scripts/rule6-<interface-name>
-
-  Contains lines that specify additional routing rules that should be added
-  when the associated interface is brought up.
-
-  Each non-comment line is used directly as an argument to "/sbin/ip rule add"
-  or "/sbin/ip -6 rule add" for rule6 files.
-