functions: remote tabs and fix spacing

1 files changed, 435 insertions, 430 deletions

diff --git a/rc.d/init.d/functions b/rc.d/init.d/functions
index 3bad6f71..788902c0 100644
--- a/rc.d/init.d/functions
+++ b/rc.d/init.d/functions
@@ -1,7 +1,7 @@
 # -*-Shell-script-*-
 #
-# functions	This file contains functions to be used by most or all
-#		shell scripts in the /etc/init.d directory.
+# functions This file contains functions to be used by most or all
+#       shell scripts in the /etc/init.d directory.
 #
 
 TEXTDOMAIN=initscripts
@@ -14,98 +14,99 @@ PATH="/sbin:/usr/sbin:/bin:/usr/bin"
 export PATH
 
 if [ $PPID -ne 1 -a -z "$SYSTEMCTL_SKIP_REDIRECT" ] && \
-		[ -d /run/systemd/system ] ; then
-        case "$0" in
-        /etc/init.d/*|/etc/rc.d/init.d/*)
-		_use_systemctl=1
-		;;
-	esac
+        [ -d /run/systemd/system ] ; then
+    case "$0" in
+    /etc/init.d/*|/etc/rc.d/init.d/*)
+        _use_systemctl=1
+        ;;
+    esac
 fi
 
 systemctl_redirect () {
-	local s
-	local prog=${1##*/}
-        local command=$2
-        local options=""
-
-	case "$command" in
-	start)
-		s=$"Starting $prog (via systemctl): "
-		;;
-	stop)
-		s=$"Stopping $prog (via systemctl): "
-		;;
-	reload|try-reload)
-		s=$"Reloading $prog configuration (via systemctl): "
-		;;
-	restart|try-restart|condrestart)
-		s=$"Restarting $prog (via systemctl): "
-		;;
-	esac
-
-        if [ -n "$SYSTEMCTL_IGNORE_DEPENDENCIES" ] ; then
-                options="--ignore-dependencies"
-        fi
+    local s
+    local prog=${1##*/}
+    local command=$2
+    local options=""
+
+    case "$command" in
+    start)
+        s=$"Starting $prog (via systemctl): "
+        ;;
+    stop)
+        s=$"Stopping $prog (via systemctl): "
+        ;;
+    reload|try-reload)
+        s=$"Reloading $prog configuration (via systemctl): "
+        ;;
+    restart|try-restart|condrestart)
+        s=$"Restarting $prog (via systemctl): "
+        ;;
+    esac
 
-        if ! systemctl show "$prog.service" > /dev/null 2>&1 || \
-           systemctl show -p LoadState "$prog.service" | grep -q 'not-found' ; then
-                action $"Reloading systemd: " /bin/systemctl daemon-reload
-        fi
+    if [ -n "$SYSTEMCTL_IGNORE_DEPENDENCIES" ] ; then
+        options="--ignore-dependencies"
+    fi
 
-	action "$s" /bin/systemctl $options $command "$prog.service"
+    if ! systemctl show "$prog.service" > /dev/null 2>&1 || \
+            systemctl show -p LoadState "$prog.service" | grep -q 'not-found' ; then
+        action $"Reloading systemd: " /bin/systemctl daemon-reload
+    fi
+
+    action "$s" /bin/systemctl $options $command "$prog.service"
 }
 
 # Get a sane screen width
 [ -z "${COLUMNS:-}" ] && COLUMNS=80
 
 if [ -z "${CONSOLETYPE:-}" ]; then
-  if [ -c "/dev/stderr" -a -r "/dev/stderr" ]; then
-    CONSOLETYPE="$(/sbin/consoletype < /dev/stderr 2>/dev/null)"
-  else
-    CONSOLETYPE="serial"
-  fi
+    if [ -c "/dev/stderr" -a -r "/dev/stderr" ]; then
+        CONSOLETYPE="$(/sbin/consoletype < /dev/stderr 2>/dev/null)"
+    else
+        CONSOLETYPE="serial"
+    fi
 fi
 
-if [ -z "${NOLOCALE:-}" ] && [ -z "${LANGSH_SOURCED:-}" ] && [ -f /etc/sysconfig/i18n -o -f /etc/locale.conf ] ; then
-  . /etc/profile.d/lang.sh 2>/dev/null
-  # avoid propagating LANGSH_SOURCED any further
-  unset LANGSH_SOURCED
+if [ -z "${NOLOCALE:-}" ] && [ -z "${LANGSH_SOURCED:-}" ] && \
+        [ -f /etc/sysconfig/i18n -o -f /etc/locale.conf ] ; then
+    . /etc/profile.d/lang.sh 2>/dev/null
+    # avoid propagating LANGSH_SOURCED any further
+    unset LANGSH_SOURCED
 fi
 
 # Read in our configuration
 if [ -z "${BOOTUP:-}" ]; then
-  if [ -f /etc/sysconfig/init ]; then
-      . /etc/sysconfig/init
-  else
-    # This all seem confusing? Look in /etc/sysconfig/init,
-    # or in /usr/share/doc/initscripts-*/sysconfig.txt
-    BOOTUP=color
-    RES_COL=60
-    MOVE_TO_COL="echo -en \\033[${RES_COL}G"
-    SETCOLOR_SUCCESS="echo -en \\033[1;32m"
-    SETCOLOR_FAILURE="echo -en \\033[1;31m"
-    SETCOLOR_WARNING="echo -en \\033[1;33m"
-    SETCOLOR_NORMAL="echo -en \\033[0;39m"
-    LOGLEVEL=1
-  fi
-  if [ "$CONSOLETYPE" = "serial" ]; then
-      BOOTUP=serial
-      MOVE_TO_COL=
-      SETCOLOR_SUCCESS=
-      SETCOLOR_FAILURE=
-      SETCOLOR_WARNING=
-      SETCOLOR_NORMAL=
-  fi
+    if [ -f /etc/sysconfig/init ]; then
+        . /etc/sysconfig/init
+    else
+        # This all seem confusing? Look in /etc/sysconfig/init,
+        # or in /usr/share/doc/initscripts-*/sysconfig.txt
+        BOOTUP=color
+        RES_COL=60
+        MOVE_TO_COL="echo -en \\033[${RES_COL}G"
+        SETCOLOR_SUCCESS="echo -en \\033[1;32m"
+        SETCOLOR_FAILURE="echo -en \\033[1;31m"
+        SETCOLOR_WARNING="echo -en \\033[1;33m"
+        SETCOLOR_NORMAL="echo -en \\033[0;39m"
+        LOGLEVEL=1
+    fi
+    if [ "$CONSOLETYPE" = "serial" ]; then
+        BOOTUP=serial
+        MOVE_TO_COL=
+        SETCOLOR_SUCCESS=
+        SETCOLOR_FAILURE=
+        SETCOLOR_WARNING=
+        SETCOLOR_NORMAL=
+    fi
 fi
 
 # Check if any of $pid (could be plural) are running
 checkpid() {
-	local i
+    local i
 
-	for i in $* ; do
-		[ -d "/proc/$i" ] && return 0
-	done
-	return 1
+    for i in $* ; do
+        [ -d "/proc/$i" ] && return 0
+    done
+    return 1
 }
 
 __kill_pids_term_kill_checkpids() {
@@ -179,418 +180,422 @@ __kill_pids_term_kill() {
 # local in the caller.
 # Returns LSB exit code for the 'status' action.
 __pids_var_run() {
-	local base=${1##*/}
-	local pid_file=${2:-/var/run/$base.pid}
-	local pid_dir=$(/usr/bin/dirname $pid_file > /dev/null)
-
-	[ -d "$pid_dir" -a ! -r "$pid_dir" ] && return 4
-
-	pid=
-	if [ -f "$pid_file" ] ; then
-	        local line p
-
-		[ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege"
-		while : ; do
-			read line
-			[ -z "$line" ] && break
-			for p in $line ; do
-				[ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] && pid="$pid $p"
-			done
-		done < "$pid_file"
-
-	        if [ -n "$pid" ]; then
-	                return 0
-	        fi
-		return 1 # "Program is dead and /var/run pid file exists"
-	fi
-	return 3 # "Program is not running"
+    local base=${1##*/}
+    local pid_file=${2:-/var/run/$base.pid}
+    local pid_dir=$(/usr/bin/dirname $pid_file > /dev/null)
+
+    [ -d "$pid_dir" -a ! -r "$pid_dir" ] && return 4
+
+    pid=
+    if [ -f "$pid_file" ] ; then
+            local line p
+
+        [ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege"
+        while : ; do
+            read line
+            [ -z "$line" ] && break
+            for p in $line ; do
+                [ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] && pid="$pid $p"
+            done
+        done < "$pid_file"
+
+            if [ -n "$pid" ]; then
+                    return 0
+            fi
+        return 1 # "Program is dead and /var/run pid file exists"
+    fi
+    return 3 # "Program is not running"
 }
 
 # Output PIDs of matching processes, found using pidof
 __pids_pidof() {
-	pidof -c -m -o $$ -o $PPID -o %PPID -x "$1" || \
-		pidof -c -m -o $$ -o $PPID -o %PPID -x "${1##*/}"
+    pidof -c -m -o $$ -o $PPID -o %PPID -x "$1" || \
+        pidof -c -m -o $$ -o $PPID -o %PPID -x "${1##*/}"
 }
 
 
 # A function to start a program.
 daemon() {
-	# Test syntax.
-	local gotbase= force= nicelevel corelimit
-	local pid base= user= nice= bg= pid_file=
-	local cgroup=
-	nicelevel=0
-	while [ "$1" != "${1##[-+]}" ]; do
-	  case $1 in
-	    '')    echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
-	           return 1;;
-	    --check)
-		   base=$2
-		   gotbase="yes"
-		   shift 2
-		   ;;
-	    --check=?*)
-	    	   base=${1#--check=}
-		   gotbase="yes"
-		   shift
-		   ;;
-	    --user)
-		   user=$2
-		   shift 2
-		   ;;
-	    --user=?*)
-	           user=${1#--user=}
-		   shift
-		   ;;
-	    --pidfile)
-		   pid_file=$2
-		   shift 2
-		   ;;
-	    --pidfile=?*)
-		   pid_file=${1#--pidfile=}
-		   shift
-		   ;;
-	    --force)
-	    	   force="force"
-		   shift
-		   ;;
-	    [-+][0-9]*)
-	    	   nice="nice -n $1"
-	           shift
-		   ;;
-	    *)     echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
-	           return 1;;
-	  esac
-	done
-
-        # Save basename.
-        [ -z "$gotbase" ] && base=${1##*/}
-
-        # See if it's already running. Look *only* at the pid file.
-	__pids_var_run "$base" "$pid_file"
-
-	[ -n "$pid" -a -z "$force" ] && return
-
-	# make sure it doesn't core dump anywhere unless requested
-	corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}"
-
-	# if they set NICELEVEL in /etc/sysconfig/foo, honor it
-	[ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL"
-
-	# if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it
-	if [ -n "${CGROUP_DAEMON}" ]; then
-		if [ ! -x /bin/cgexec ]; then
-			echo -n "Cgroups not installed"; warning
-			echo
-		else
-			cgroup="/bin/cgexec";
-			for i in $CGROUP_DAEMON; do
-				cgroup="$cgroup -g $i";
-			done
-		fi
-	fi
-
-	# Echo daemon
-        [ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base"
-
-	# And start it up.
-	if [ -z "$user" ]; then
-	   $cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
-	else
-	   $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
-	fi
-
-	[ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
+    # Test syntax.
+    local gotbase= force= nicelevel corelimit
+    local pid base= user= nice= bg= pid_file=
+    local cgroup=
+    nicelevel=0
+    while [ "$1" != "${1##[-+]}" ]; do
+        case $1 in
+        '')
+            echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
+            return 1
+            ;;
+        --check)
+            base=$2
+            gotbase="yes"
+            shift 2
+            ;;
+        --check=?*)
+            base=${1#--check=}
+            gotbase="yes"
+            shift
+            ;;
+        --user)
+            user=$2
+            shift 2
+            ;;
+        --user=?*)
+            user=${1#--user=}
+            shift
+            ;;
+        --pidfile)
+            pid_file=$2
+            shift 2
+            ;;
+        --pidfile=?*)
+            pid_file=${1#--pidfile=}
+            shift
+            ;;
+        --force)
+            force="force"
+            shift
+            ;;
+        [-+][0-9]*)
+            nice="nice -n $1"
+            shift
+            ;;
+        *)
+            echo $"$0: Usage: daemon [+/-nicelevel] {program}" "[arg1]..."
+            return 1
+            ;;
+      esac
+    done
+
+    # Save basename.
+    [ -z "$gotbase" ] && base=${1##*/}
+
+    # See if it's already running. Look *only* at the pid file.
+    __pids_var_run "$base" "$pid_file"
+
+    [ -n "$pid" -a -z "$force" ] && return
+
+    # make sure it doesn't core dump anywhere unless requested
+    corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}"
+
+    # if they set NICELEVEL in /etc/sysconfig/foo, honor it
+    [ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL"
+
+    # if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it
+    if [ -n "${CGROUP_DAEMON}" ]; then
+        if [ ! -x /bin/cgexec ]; then
+            echo -n "Cgroups not installed"; warning
+            echo
+        else
+            cgroup="/bin/cgexec";
+            for i in $CGROUP_DAEMON; do
+                cgroup="$cgroup -g $i";
+            done
+        fi
+    fi
+
+    # Echo daemon
+    [ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base"
+
+    # And start it up.
+    if [ -z "$user" ]; then
+       $cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
+    else
+       $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
+    fi
+
+    [ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
 }
 
 # A function to stop a program.
 killproc() {
-	local RC killlevel= base pid pid_file= delay try
-
-	RC=0; delay=3; try=0
-	# Test syntax.
-	if [ "$#" -eq 0 ]; then
-		echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
-		return 1
-	fi
-	if [ "$1" = "-p" ]; then
-		pid_file=$2
-		shift 2
-	fi
-	if [ "$1" = "-d" ]; then
-		delay=$(echo $2 | awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$|^[0-9.]*$/?1:$1~/m$/?60:$1~/h$/?60*60:$1~/d$/?24*60*60:-1;if(d==-1) exit 1;delay+=d*$1} END {printf("%d",delay+0.5)}')
-		if [ "$?" -eq 1 ]; then
-			echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
-			return 1
-		fi
-		shift 2
-	fi
-
-
-	# check for second arg to be kill level
-	[ -n "${2:-}" ] && killlevel=$2
-
-        # Save basename.
-        base=${1##*/}
-
-        # Find pid.
-	__pids_var_run "$1" "$pid_file"
-	RC=$?
-	if [ -z "$pid" ]; then
-		if [ -z "$pid_file" ]; then
-			pid="$(__pids_pidof "$1")"
-		else
-			[ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;}
-		fi
-	fi
-
-        # Kill it.
-        if [ -n "$pid" ] ; then
-                [ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
-		if [ -z "$killlevel" ] ; then
-			__kill_pids_term_kill -d $delay $pid
-			RC=$?
-			[ "$RC" -eq 0 ] && success $"$base shutdown" || failure $"$base shutdown"
-		# use specified level only
-		else
-		        if checkpid $pid; then
-	                	kill $killlevel $pid >/dev/null 2>&1
-				RC=$?
-				[ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
-			elif [ -n "${LSB:-}" ]; then
-				RC=7 # Program is not running
-			fi
-		fi
-	else
-		if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
-			RC=7 # Program is not running
-		else
-			failure $"$base shutdown"
-			RC=0
-		fi
-	fi
-
-        # Remove pid file if any.
-	if [ -z "$killlevel" ]; then
-            rm -f "${pid_file:-/var/run/$base.pid}"
-	fi
-	return $RC
+    local RC killlevel= base pid pid_file= delay try
+
+    RC=0; delay=3; try=0
+    # Test syntax.
+    if [ "$#" -eq 0 ]; then
+        echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+        return 1
+    fi
+    if [ "$1" = "-p" ]; then
+        pid_file=$2
+        shift 2
+    fi
+    if [ "$1" = "-d" ]; then
+        delay=$(echo $2 | awk -v RS=' ' -v IGNORECASE=1 '{if($1!~/^[0-9.]+[smhd]?$/) exit 1;d=$1~/s$|^[0-9.]*$/?1:$1~/m$/?60:$1~/h$/?60*60:$1~/d$/?24*60*60:-1;if(d==-1) exit 1;delay+=d*$1} END {printf("%d",delay+0.5)}')
+        if [ "$?" -eq 1 ]; then
+            echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+            return 1
+        fi
+        shift 2
+    fi
+
+
+    # check for second arg to be kill level
+    [ -n "${2:-}" ] && killlevel=$2
+
+    # Save basename.
+    base=${1##*/}
+
+    # Find pid.
+    __pids_var_run "$1" "$pid_file"
+    RC=$?
+    if [ -z "$pid" ]; then
+        if [ -z "$pid_file" ]; then
+            pid="$(__pids_pidof "$1")"
+        else
+            [ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;}
+        fi
+    fi
+
+    # Kill it.
+    if [ -n "$pid" ] ; then
+        [ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
+        if [ -z "$killlevel" ] ; then
+            __kill_pids_term_kill -d $delay $pid
+            RC=$?
+            [ "$RC" -eq 0 ] && success $"$base shutdown" || failure $"$base shutdown"
+        # use specified level only
+        else
+            if checkpid $pid; then
+                kill $killlevel $pid >/dev/null 2>&1
+                RC=$?
+                [ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
+            elif [ -n "${LSB:-}" ]; then
+                RC=7 # Program is not running
+            fi
+        fi
+    else
+        if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
+            RC=7 # Program is not running
+        else
+            failure $"$base shutdown"
+            RC=0
+        fi
+    fi
+
+    # Remove pid file if any.
+    if [ -z "$killlevel" ]; then
+        rm -f "${pid_file:-/var/run/$base.pid}"
+    fi
+    return $RC
 }
 
 # A function to find the pid of a program. Looks *only* at the pidfile
 pidfileofproc() {
-	local pid
+    local pid
 
-	# Test syntax.
-	if [ "$#" = 0 ] ; then
-		echo $"Usage: pidfileofproc {program}"
-		return 1
-	fi
+    # Test syntax.
+    if [ "$#" = 0 ] ; then
+        echo $"Usage: pidfileofproc {program}"
+        return 1
+    fi
 
-	__pids_var_run "$1"
-	[ -n "$pid" ] && echo $pid
-	return 0
+    __pids_var_run "$1"
+    [ -n "$pid" ] && echo $pid
+    return 0
 }
 
 # A function to find the pid of a program.
 pidofproc() {
-	local RC pid pid_file=
-
-	# Test syntax.
-	if [ "$#" = 0 ]; then
-		echo $"Usage: pidofproc [-p pidfile] {program}"
-		return 1
-	fi
-	if [ "$1" = "-p" ]; then
-		pid_file=$2
-		shift 2
-	fi
-	fail_code=3 # "Program is not running"
-
-	# First try "/var/run/*.pid" files
-	__pids_var_run "$1" "$pid_file"
-	RC=$?
-	if [ -n "$pid" ]; then
-		echo $pid
-		return 0
-	fi
-
-	[ -n "$pid_file" ] && return $RC
-	__pids_pidof "$1" || return $RC
+    local RC pid pid_file=
+
+    # Test syntax.
+    if [ "$#" = 0 ]; then
+        echo $"Usage: pidofproc [-p pidfile] {program}"
+        return 1
+    fi
+    if [ "$1" = "-p" ]; then
+        pid_file=$2
+        shift 2
+    fi
+    fail_code=3 # "Program is not running"
+
+    # First try "/var/run/*.pid" files
+    __pids_var_run "$1" "$pid_file"
+    RC=$?
+    if [ -n "$pid" ]; then
+        echo $pid
+        return 0
+    fi
+
+    [ -n "$pid_file" ] && return $RC
+    __pids_pidof "$1" || return $RC
 }
 
 status() {
-	local base pid lock_file= pid_file=
-
-	# Test syntax.
-	if [ "$#" = 0 ] ; then
-		echo $"Usage: status [-p pidfile] {program}"
-		return 1
-	fi
-	if [ "$1" = "-p" ]; then
-		pid_file=$2
-		shift 2
-	fi
-	if [ "$1" = "-l" ]; then
-		lock_file=$2
-		shift 2
-	fi
-	base=${1##*/}
-
-	if [ "$_use_systemctl" = "1" ]; then
-		systemctl status ${0##*/}.service
-		ret=$?
-		# LSB daemons that dies abnormally in systemd looks alive in systemd's eyes due to RemainAfterExit=yes
-		# lets adjust the reality a little bit
-		if systemctl show -p ActiveState ${0##*/}.service | grep -q '=active$' && \
-		systemctl show -p SubState ${0##*/}.service | grep -q '=exited$' ; then
-			ret=3
-		fi
-		return $ret
-	fi
-
-	# First try "pidof"
-	__pids_var_run "$1" "$pid_file"
-	RC=$?
-	if [ -z "$pid_file" -a -z "$pid" ]; then
-		pid="$(__pids_pidof "$1")"
-	fi
-	if [ -n "$pid" ]; then
-	        echo $"${base} (pid $pid) is running..."
-	        return 0
-	fi
-
-	case "$RC" in
-		0)
-			echo $"${base} (pid $pid) is running..."
-			return 0
-			;;
-		1)
-	                echo $"${base} dead but pid file exists"
-	                return 1
-			;;
-		4)
-			echo $"${base} status unknown due to insufficient privileges."
-			return 4
-			;;
-	esac
-	if [ -z "${lock_file}" ]; then
-		lock_file=${base}
-	fi
-	# See if /var/lock/subsys/${lock_file} exists
-	if [ -f /var/lock/subsys/${lock_file} ]; then
-		echo $"${base} dead but subsys locked"
-		return 2
-	fi
-	echo $"${base} is stopped"
-	return 3
+    local base pid lock_file= pid_file=
+
+    # Test syntax.
+    if [ "$#" = 0 ] ; then
+        echo $"Usage: status [-p pidfile] {program}"
+        return 1
+    fi
+    if [ "$1" = "-p" ]; then
+        pid_file=$2
+        shift 2
+    fi
+    if [ "$1" = "-l" ]; then
+        lock_file=$2
+        shift 2
+    fi
+    base=${1##*/}
+
+    if [ "$_use_systemctl" = "1" ]; then
+        systemctl status ${0##*/}.service
+        ret=$?
+        # LSB daemons that dies abnormally in systemd looks alive in systemd's eyes due to RemainAfterExit=yes
+        # lets adjust the reality a little bit
+        if systemctl show -p ActiveState ${0##*/}.service | grep -q '=active$' && \
+        systemctl show -p SubState ${0##*/}.service | grep -q '=exited$' ; then
+            ret=3
+        fi
+        return $ret
+    fi
+
+    # First try "pidof"
+    __pids_var_run "$1" "$pid_file"
+    RC=$?
+    if [ -z "$pid_file" -a -z "$pid" ]; then
+        pid="$(__pids_pidof "$1")"
+    fi
+    if [ -n "$pid" ]; then
+        echo $"${base} (pid $pid) is running..."
+        return 0
+    fi
+
+    case "$RC" in
+    0)
+        echo $"${base} (pid $pid) is running..."
+        return 0
+        ;;
+    1)
+        echo $"${base} dead but pid file exists"
+        return 1
+        ;;
+    4)
+        echo $"${base} status unknown due to insufficient privileges."
+        return 4
+        ;;
+    esac
+    if [ -z "${lock_file}" ]; then
+        lock_file=${base}
+    fi
+    # See if /var/lock/subsys/${lock_file} exists
+    if [ -f /var/lock/subsys/${lock_file} ]; then
+        echo $"${base} dead but subsys locked"
+        return 2
+    fi
+    echo $"${base} is stopped"
+    return 3
 }
 
 echo_success() {
-  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
-  echo -n "["
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
-  echo -n $"  OK  "
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
-  echo -n "]"
-  echo -ne "\r"
-  return 0
+    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+    echo -n "["
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
+    echo -n $"  OK  "
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+    echo -n "]"
+    echo -ne "\r"
+    return 0
 }
 
 echo_failure() {
-  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
-  echo -n "["
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
-  echo -n $"FAILED"
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
-  echo -n "]"
-  echo -ne "\r"
-  return 1
+    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+    echo -n "["
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
+    echo -n $"FAILED"
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+    echo -n "]"
+    echo -ne "\r"
+    return 1
 }
 
 echo_passed() {
-  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
-  echo -n "["
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
-  echo -n $"PASSED"
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
-  echo -n "]"
-  echo -ne "\r"
-  return 1
+    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+    echo -n "["
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
+    echo -n $"PASSED"
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+    echo -n "]"
+    echo -ne "\r"
+    return 1
 }
 
 echo_warning() {
-  [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
-  echo -n "["
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
-  echo -n $"WARNING"
-  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
-  echo -n "]"
-  echo -ne "\r"
-  return 1
+    [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
+    echo -n "["
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
+    echo -n $"WARNING"
+    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
+    echo -n "]"
+    echo -ne "\r"
+    return 1
 }
 
 # Inform the graphical boot of our current state
 update_boot_stage() {
-  if [ -x /bin/plymouth ]; then
-      /bin/plymouth --update="$1"
-  fi
-  return 0
+    if [ -x /bin/plymouth ]; then
+        /bin/plymouth --update="$1"
+    fi
+    return 0
 }
 
 # Log that something succeeded
 success() {
-  [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
-  return 0
+    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
+    return 0
 }
 
 # Log that something failed
 failure() {
-  local rc=$?
-  [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
-  [ -x /bin/plymouth ] && /bin/plymouth --details
-  return $rc
+    local rc=$?
+    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
+    [ -x /bin/plymouth ] && /bin/plymouth --details
+    return $rc
 }
 
 # Log that something passed, but may have had errors. Useful for fsck
 passed() {
-  local rc=$?
-  [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
-  return $rc
+    local rc=$?
+    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
+    return $rc
 }
 
 # Log a warning
 warning() {
-  local rc=$?
-  [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
-  return $rc
+    local rc=$?
+    [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
+    return $rc
 }
 
 # Run some action. Log its output.
 action() {
-  local STRING rc
-
-  STRING=$1
-  echo -n "$STRING "
-  shift
-  "$@" && success $"$STRING" || failure $"$STRING"
-  rc=$?
-  echo
-  return $rc
+    local STRING rc
+
+    STRING=$1
+    echo -n "$STRING "
+    shift
+    "$@" && success $"$STRING" || failure $"$STRING"
+    rc=$?
+    echo
+    return $rc
 }
 
 # returns OK if $1 contains $2
 strstr() {
-  [ "${1#*$2*}" = "$1" ] && return 1
-  return 0
+    [ "${1#*$2*}" = "$1" ] && return 1
+    return 0
 }
 
 # Check whether file $1 is a backup or rpm-generated file and should be ignored
 is_ignored_file() {
     case "$1" in
-	*~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
-	    return 0
-	    ;;
+    *~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
+        return 0
+        ;;
     esac
     return 1
 }
@@ -598,9 +603,9 @@ is_ignored_file() {
 # Evaluate shvar-style booleans
 is_true() {
     case "$1" in
-	[tT] | [yY] | [yY][eE][sS] | [tT][rR][uU][eE])
-	return 0
-	;;
+    [tT] | [yY] | [yY][eE][sS] | [tT][rR][uU][eE])
+        return 0
+        ;;
     esac
     return 1
 }
@@ -608,9 +613,9 @@ is_true() {
 # Evaluate shvar-style booleans
 is_false() {
     case "$1" in
-	[fF] | [nN] | [nN][oO] | [fF][aA][lL][sS][eE])
-	return 0
-	;;
+    [fF] | [nN] | [nN][oO] | [fF][aA][lL][sS][eE])
+        return 0
+        ;;
     esac
     return 1
 }
@@ -618,7 +623,7 @@ is_false() {
 # Apply sysctl settings, including files in /etc/sysctl.d
 apply_sysctl() {
     if [ -x /lib/systemd/systemd-sysctl ]; then
-	/lib/systemd/systemd-sysctl
+    /lib/systemd/systemd-sysctl
     else
         for file in /usr/lib/sysctl.d/*.conf ; do
             is_ignored_file "$file" && continue
@@ -644,16 +649,16 @@ __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave
 
 if [ "$_use_systemctl" = "1" ]; then
         if  [ "x$1" = xstart -o \
-                "x$1" = xstop -o \
-                "x$1" = xrestart -o \
-                "x$1" = xreload -o \
-                "x$1" = xtry-restart -o \
-                "x$1" = xforce-reload -o \
-                "x$1" = xcondrestart ] ; then
-
-		systemctl_redirect $0 $1
-		exit $?
-	fi
+              "x$1" = xstop -o \
+              "x$1" = xrestart -o \
+              "x$1" = xreload -o \
+              "x$1" = xtry-restart -o \
+              "x$1" = xforce-reload -o \
+              "x$1" = xcondrestart ] ; then
+
+        systemctl_redirect $0 $1
+        exit $?
+    fi
 fi
 
 strstr "$(cat /proc/cmdline)" "rc.debug" && set -x