Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: fedora-sysv/initscripts
Translate-URL: https://translate.fedoraproject.org/projects/fedora-sysv/initscripts/

1 files changed, 598 insertions, 494 deletions

diff --git a/po/ko.po b/po/ko.po
index d4ebf9e5..f5862d9b 100644
--- a/po/ko.po
+++ b/po/ko.po
@@ -13,7 +13,8 @@ msgstr ""
 "POT-Creation-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "PO-Revision-Date: 2015-03-13 03:03+0000\n"
 "Last-Translator: Copied by Zanata <copied-by-zanata@zanata.org>\n"
-"Language-Team: Korean (http://www.transifex.com/projects/p/fedora/language/ko/)\n"
+"Language-Team: Korean (http://www.transifex.com/projects/p/fedora/language/"
+"ko/)\n"
 "Language: ko\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -21,678 +22,781 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Zanata 4.6.2\n"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:904
-msgid "No parameters given to setup a default route"
-msgstr "기본 라우트를 설정할 변수가 주어지지 않았습니다"
-
-#: ../sysconfig/network-scripts/ifup-aliases:67
-msgid "usage: ifup-aliases <net-device> [<parent-config>]\n"
-msgstr "사용법: ifup-aliases <네트워크-장치> [<parent-config>]\n"
+#: ../network-scripts/ifdown:15 ../network-scripts/ifdown:22
+msgid "usage: ifdown <configuration>"
+msgstr "사용법: ifdown <장치 명>"
 
-#: ../sysconfig/network-scripts/ifup-sit:63
-msgid "Missing remote IPv4 address of tunnel, configuration is not valid"
-msgstr "터널의 원거리 IPv4주소가 없습니다, 설정이 맞지 않습니다!"
+#: ../network-scripts/ifdown:33 ../network-scripts/ifup:49
+msgid "Users cannot control this device."
+msgstr "사용자가 이 장치를 제어할수 없습니다."
 
-#: ../rc.d/init.d/functions:478
-msgid "${base} status unknown due to insufficient privileges."
+#: ../network-scripts/ifdown:40
+msgid ""
+"You are using 'ifdown' script provided by 'network-scripts', which are now "
+"deprecated."
 msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:145
-msgid "Missing parameter 'IPv6-address' (arg 2)"
-msgstr "'IPv6-address' (arg 2) 변수가 없습니다"
-
-#: ../rc.d/init.d/functions:318 ../rc.d/init.d/functions:328
-msgid "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
-msgstr "사용법: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+#: ../network-scripts/ifdown:41 ../network-scripts/ifup:57
+#: ../etc/rc.d/init.d/network:53
+msgid "'network-scripts' will be removed from distribution in near future."
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-ipv6:237
+#: ../network-scripts/ifdown:42 ../network-scripts/ifup:58
 msgid ""
-"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of "
-"'$tunnelmtu', ignored"
-msgstr "주의: 6to4에 설정된 MTU '$IPV6TO4_MTU'이 '$tunnelmtu'의 최대 한계를 초과합니다. 무시합니다."
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:964
-msgid "Unsupported reason '$reason' for sending trigger to radvd"
-msgstr "'$reason' 이유는 지원되지 않으므로 radvd에 트리거를 보낼 수 없습니다"
+"It is advised to switch to 'NetworkManager' instead - it provides 'ifup/"
+"ifdown' scripts as well."
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup:111
-#: ../sysconfig/network-scripts/ifup-eth:96
+#: ../network-scripts/ifdown-eth:46 ../network-scripts/ifdown-eth:52
 msgid ""
-"$alias device ${DEVICE} does not seem to be present, delaying "
-"initialization."
-msgstr "$alias 장치 ${DEVICE}가 없는것 같습니다. 초기화를 연기합니다."
+"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured "
+"address ${HWADDR}. Ignoring."
+msgstr ""
+"${DEVICE} 장치가 설정된 주소인 ${HWADDR} 대신 ${FOUNDMACADDR} MAC 주소를 가지"
+"고 있습니다. 무시합니다."
 
-#: ../rc.d/init.d/functions:474
-msgid "${base} dead but pid file exists"
-msgstr "$(base)가 종료되었지만 pid 파일이 존재합니다"
+#: ../network-scripts/ifdown-routes:6
+#, fuzzy
+msgid "usage: ifdown-routes <net-device> [<nickname>]"
+msgstr "사용법: ifup-routes <net-device> [<nickname>]"
 
-#: ../sysconfig/network-scripts/ifup-aliases:273
-msgid "Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
+#: ../network-scripts/ifdown-sit:40 ../network-scripts/ifup-sit:58
+msgid ""
+"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and "
+"restart (IPv6) networking"
 msgstr ""
+"여기는 장치 '$DEVICE'를 지원하지 않습니다, IPV6_AUTOTUNNEL 설정을 사용하고 "
+"(IPv6) 네크워크를 다시 시작하십시오."
 
-#: ../sysconfig/network-scripts/ifup-eth:198
-msgid "Determining IP information for ${DEVICE}..."
-msgstr "${DEVICE}에 관한 IP 정보를 얻고 있습니다..."
+#: ../network-scripts/ifdown-tunnel:36 ../network-scripts/ifup-tunnel:68
+msgid "Device '$DEVICE' isn't supported as a valid GRE device name."
+msgstr "'$DEVICE' 장치는 올바른 GRE 장치 이름으로 지원되지 않습니다."
 
-#: ../rc.d/init.d/functions:531
-msgid "WARNING"
-msgstr "주의"
+#: ../network-scripts/ifup:30 ../network-scripts/ifup:38
+msgid "Usage: ifup <configuration>"
+msgstr "사용법: ifup <device name>"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:61
-msgid "Missing parameter 'IPv6-gateway' (arg 2)"
-msgstr "'IPv6-gateway' (arg 2) 변수가 없음"
+#: ../network-scripts/ifup:37
+msgid "$0: configuration for ${1} not found."
+msgstr "$0: $(1)의 설정을 찾을 수 없습니다."
 
-#: ../rc.d/init.d/functions:391
-msgid "Usage: pidfileofproc {program}"
-msgstr "사용법: pidfileofproc {program}"
+#: ../network-scripts/ifup:56
+msgid ""
+"You are using 'ifup' script provided by 'network-scripts', which are now "
+"deprecated."
+msgstr ""
 
-#: ../rc.d/init.d/functions:308 ../rc.d/init.d/functions:308
-msgid "$base startup"
-msgstr "$base 시작"
+#: ../network-scripts/ifup:87 ../network-scripts/ifup:102
+msgid "PHYSDEV should be set for device ${DEVICE}"
+msgstr "장치 ${DEVICE}를 위해 PHYSDEV가 설정되어야 합니다"
 
-#: ../sysconfig/network-scripts/ifup-eth:43
-msgid "Device ${DEVICE} has different MAC address than expected, ignoring."
-msgstr "${DEVICE} 장치가 예기치 않은 MAC주소를 가지고 있습니다, 무시합니다."
+#: ../network-scripts/ifup:110
+msgid "No 802.1Q VLAN support available in kernel for device ${DEVICE}"
+msgstr "${DEVICE} 장치에 사용되는 커널에서 802.1Q VLAN을 지원하지 않습니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:383
-msgid "Missing parameter 'address' (arg 1)"
-msgstr "'address' (arg 1) 변수가 주어지지 않았습니다"
+#: ../network-scripts/ifup:117 ../network-scripts/ifup-eth:123
+msgid ""
+"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+msgstr "$alias 장치 ${DEVICE}가 없는것 같습니다. 초기화를 연기합니다."
 
-#: ../rc.d/init.d/netconsole:93
-msgid "Server address not specified in /etc/sysconfig/netconsole"
-msgstr "/etc/sysconfig/netconsole에 서버 주소가 명시되어 있지 않음 "
+#: ../network-scripts/ifup:138 ../network-scripts/ifup:139
+msgid "ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
+msgstr "오류: ${PHYSDEV} 장치에 vlan ${VID}를 ${DEVICE}로 추가하지 못했습니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:798
-msgid "Missing parameter 'IPv6 MTU' (arg 2)"
-msgstr "'IPv6 MTU' (arg 2) 변수가 없습니다"
+#: ../network-scripts/ifup-aliases:67
+msgid "usage: ifup-aliases <net-device> [<parent-config>]\n"
+msgstr "사용법: ifup-aliases <네트워크-장치> [<parent-config>]\n"
 
-#: ../rc.d/init.d/network:70
-msgid "Bringing up loopback interface: "
-msgstr "loopback 인터페이스 활성화중 입니다: "
+#: ../network-scripts/ifup-aliases:119
+msgid "Missing config file $PARENTCONFIG."
+msgstr "설정 파일인 $PARENTCONFIG 없음."
 
-#: ../rc.d/init.d/functions:520
-msgid "PASSED"
-msgstr "통과"
+#: ../network-scripts/ifup-aliases:169
+msgid "error in $FILE: invalid alias number"
+msgstr "$FILE에서 오류: 유효하지 않은 별명 숫자"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:394
-msgid "Given address '$addr' is not a global IPv4 one (arg 1)"
-msgstr "지정된 주소 '$addr'는 시스템 전역적으로 사용가능한 IPv4 주소가 아닙니다 (arg 1)"
+#: ../network-scripts/ifup-aliases:179
+msgid "error in $FILE: already seen ipaddr $IPADDR in $ipseen"
+msgstr "$FILE에 오류 발생: $ipseen에 ip주소 $IPADDR가 이미 존재합니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:706
-msgid "Missing parameter 'selection' (arg 2)"
-msgstr "'selection' (arg 2) 변수가 없습니다"
+#: ../network-scripts/ifup-aliases:184
+msgid "error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
+msgstr ""
+"$FILE에 오류 발생: $devseen에 $parent_device:$DEVNUM 장치가 이미 존재합니다"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:222
-msgid ""
-"IPv6to4 configuration needs an IPv4 address on related interface or "
-"otherwise specified"
-msgstr "IPv6to4 설정에서 특별히 다르게 지정되지 않은 한 관련 인터페이스에 IPv4 주소가 필요합니다."
+#: ../network-scripts/ifup-aliases:193
+msgid "error in $FILE: didn't specify device or ipaddr"
+msgstr "$FILE에 오류 발생: 장치 또는 IP주소가 지정되지 않았습니다"
 
-#: ../sysconfig/network-scripts/ifup-aliases:196
+#: ../network-scripts/ifup-aliases:198
 #, fuzzy
 msgid "error iN $FILE: didn't specify netmask or prefix"
 msgstr "$FILE에 오류 발생: 장치 또는 IP주소가 지정되지 않았습니다"
 
-#: ../sysconfig/network-scripts/ifdown-tunnel:36
-#: ../sysconfig/network-scripts/ifup-tunnel:63
-msgid "Device '$DEVICE' isn't supported as a valid GRE device name."
-msgstr "'$DEVICE' 장치는 올바른 GRE 장치 이름으로 지원되지 않습니다."
-
-#: ../sysconfig/network-scripts/ifup-ipv6:303
-msgid "radvd control enabled, but config is not complete"
-msgstr "radvd 제어 활성화, 그러나 설정이 완벽히 끝나지 않았습니다!"
+#: ../network-scripts/ifup-aliases:238 ../network-scripts/ifup-aliases:249
+msgid "error in ifcfg-${parent_device}: files"
+msgstr "ifcfg-${parent_device}에 에러 발생: 파일들"
 
-#: ../sysconfig/network-scripts/ifup-eth:304
-msgid "Error adding default gateway for ${REALDEVICE}."
+#: ../network-scripts/ifup-aliases:269
+msgid ""
+"Determining if ip address ${IPADDR} is already in use for device "
+"${parent_device}..."
 msgstr ""
 
-#: ../rc.d/init.d/network:246
-msgid "Usage: $0 {start|stop|status|restart|reload|force-reload}"
-msgstr "사용법: $0 {start|stop|status|restart|reload|force-reload}"
+#: ../network-scripts/ifup-aliases:273
+msgid "Error, some other host ($ARPINGMAC) already uses address ${IPADDR}."
+msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:603
-msgid "Tunnel device '$device' creation didn't work"
-msgstr "터널 장치 '$device'를 만드는데 실패했습니다"
+#: ../network-scripts/ifup-aliases:334
+msgid "error in $FILE: IPADDR_START and IPADDR_END don't agree"
+msgstr "$FILE에 오류 발생: IPADDR_START 와 IPADDR_END가 일치하지 않습니다"
 
-#: ../sysconfig/network-scripts/network-functions:636
-msgid "DEBUG     "
-msgstr ""
+#: ../network-scripts/ifup-aliases:339
+msgid "error in $FILE: IPADDR_START greater than IPADDR_END"
+msgstr "$FILE에 오류 발생: IPADDR_START가 IPADDR_END보다 큽니다"
 
-#: ../sysconfig/network-scripts/ifdown-eth:46
-#: ../sysconfig/network-scripts/ifdown-eth:52
-msgid ""
-"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured "
-"address ${HWADDR}. Ignoring."
+#: ../network-scripts/ifup-ctc:36
+msgid "ERROR: ${DEVICE} did not come up!"
 msgstr ""
-"${DEVICE} 장치가 설정된 주소인 ${HWADDR} 대신 ${FOUNDMACADDR} MAC 주소를 가지고 있습니다. 무시합니다."
 
-#: ../rc.d/init.d/functions:509
-msgid "FAILED"
-msgstr "실패"
+#: ../network-scripts/ifup-eth:43
+msgid "Device ${DEVICE} has different MAC address than expected, ignoring."
+msgstr "${DEVICE} 장치가 예기치 않은 MAC주소를 가지고 있습니다, 무시합니다."
 
-#: ../sysconfig/network-scripts/ifup-eth:336
+#: ../network-scripts/ifup-eth:116
 #, fuzzy
-msgid "Determining IPv6 information for ${DEVICE}..."
-msgstr "${DEVICE}에 관한 IP 정보를 얻고 있습니다..."
-
-#: ../rc.d/init.d/functions:490
-msgid "${base} is stopped"
-msgstr "${base}가 정지되었습니다"
-
-#: ../rc.d/init.d/functions:227 ../rc.d/init.d/functions:265
-msgid "$0: Usage: daemon [+/-nicelevel] {program}"
-msgstr "$0: 사용법: daemon [+/-nicelevel] {program}"
-
-#: ../sysconfig/network-scripts/ifup-aliases:167
-msgid "error in $FILE: invalid alias number"
-msgstr "$FILE에서 오류: 유효하지 않은 별명 숫자"
+#| msgid ""
+#| "Device ${DEVICE} does not seem to be present, delaying initialization."
+msgid "Device name does not seem to be present."
+msgstr "장치 ${DEVICE}가 없는것 같습니다. 초기화를 지연합니다."
 
-#: ../sysconfig/network-scripts/network-functions:639
-msgid "ERROR     "
-msgstr ""
+#: ../network-scripts/ifup-eth:125
+msgid "Device ${DEVICE} does not seem to be present, delaying initialization."
+msgstr "장치 ${DEVICE}가 없는것 같습니다. 초기화를 지연합니다."
 
-#: ../sysconfig/network-scripts/network-functions:642
-msgid "WARN      "
-msgstr ""
+#: ../network-scripts/ifup-eth:221
+msgid "Determining IP information for ${DEVICE}..."
+msgstr "${DEVICE}에 관한 IP 정보를 얻고 있습니다..."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:159
-msgid "Device '$device' doesn't exist"
-msgstr "'$device' 장치가 존재하지 않습니다"
+#: ../network-scripts/ifup-eth:223
+msgid " failed; no link present.  Check cable?"
+msgstr " 실패; 연결이 존재하지 않습니다.  케이블을 확인하시겠습니까?"
 
-#: ../sysconfig/network-scripts/ifup:30 ../sysconfig/network-scripts/ifup:38
-msgid "Usage: ifup <configuration>"
-msgstr "사용법: ifup <device name>"
+#: ../network-scripts/ifup-eth:230 ../network-scripts/ifup-eth:378
+msgid " done."
+msgstr " 완료."
 
-#: ../sysconfig/network-scripts/ifup:132 ../sysconfig/network-scripts/ifup:133
-msgid "ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
-msgstr "오류: ${PHYSDEV} 장치에 vlan ${VID}를 ${DEVICE}로 추가하지 못했습니다."
+#: ../network-scripts/ifup-eth:233 ../network-scripts/ifup-eth:380
+msgid " failed."
+msgstr " 실패."
 
-#: ../sysconfig/network-scripts/ifup-ctc:36
-msgid "ERROR: ${DEVICE} did not come up!"
-msgstr ""
+#: ../network-scripts/ifup-eth:257
+msgid "Failed to bring up ${DEVICE}."
+msgstr "${DEVICE} 활성화에 실패했습니다."
 
-#: ../sysconfig/network-scripts/ifup-ipv6:251
+#: ../network-scripts/ifup-eth:288
 msgid ""
-"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
-msgstr "주의: 인터페이스 'tun6to4' 는 'IPV6_DEFAULTGW'을 지원하지 않습니다, 무시합니다"
-
-#: ../sysconfig/network-scripts/init.ipv6-global:161
-msgid "Usage: $0 {start|stop|reload|restart|showsysctl}"
-msgstr "사용법: $0 {start|stop|reload|restart|showsysctl}"
-
-#: ../sysconfig/network-scripts/ifup-eth:98
-msgid "Device ${DEVICE} does not seem to be present, delaying initialization."
-msgstr "장치 ${DEVICE}가 없는것 같습니다. 초기화를 지연합니다."
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:841
-msgid "Given IPv6 default gateway '$address' is not in proper format"
-msgstr "입력하신 IPv6 기본 게이트웨이 '$address'의 형식이 올바르지 않습니다"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:140
-#: ../sysconfig/network-scripts/network-functions-ipv6:203
-#: ../sysconfig/network-scripts/network-functions-ipv6:232
-#: ../sysconfig/network-scripts/network-functions-ipv6:312
-#: ../sysconfig/network-scripts/network-functions-ipv6:427
-#: ../sysconfig/network-scripts/network-functions-ipv6:489
-#: ../sysconfig/network-scripts/network-functions-ipv6:523
-#: ../sysconfig/network-scripts/network-functions-ipv6:565
-#: ../sysconfig/network-scripts/network-functions-ipv6:643
-#: ../sysconfig/network-scripts/network-functions-ipv6:701
-#: ../sysconfig/network-scripts/network-functions-ipv6:754
-#: ../sysconfig/network-scripts/network-functions-ipv6:793
-#: ../sysconfig/network-scripts/network-functions-ipv6:921
-#: ../sysconfig/network-scripts/network-functions-ipv6:1054
-msgid "Missing parameter 'device' (arg 1)"
-msgstr "'device' (arg 1) 변수가 없습니다"
+"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
+msgstr ""
 
-#: ../rc.d/init.d/network:75
-msgid "No 802.1Q VLAN support available in kernel."
-msgstr "커널에서 802.1Q VLAN을 지원하지 않습니다."
+#: ../network-scripts/ifup-eth:295
+#, fuzzy
+msgid "Error adding address ${ipaddr[$idx]} for ${DEVICE}."
+msgstr "${DEVICE}를 위한 주소 ${IPADDR}를 추가 하는데 에러 발생"
 
-#: ../sysconfig/network-scripts/ifup-eth:299
+#: ../network-scripts/ifup-eth:322
 #, fuzzy
 msgid "Error adding default gateway ${GATEWAY} for ${DEVICE}."
 msgstr "${DEVICE}를 위한 주소 ${IPADDR}를 추가 하는데 에러 발생"
 
-#: ../sysconfig/network-scripts/ifup-sit:71
-msgid "Device '$DEVICE' is already up, please shutdown first"
-msgstr "'$DEVICE' 장치가 이미 켜져 있습니다. 먼저 종료하십시오."
-
-#: ../rc.d/init.d/netconsole:36
-msgid "Usage: $0 {start|stop|status|restart|condrestart}"
-msgstr "사용법: $0 {start|stop|status|restart|condrestart}"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:1066
-msgid "Duplicate Address Detection: Duplicate addresses detected"
+#: ../network-scripts/ifup-eth:327
+msgid "Error adding default gateway for ${REALDEVICE}."
 msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-aliases:237
-#: ../sysconfig/network-scripts/ifup-aliases:248
-msgid "error in ifcfg-${parent_device}: files"
-msgstr "ifcfg-${parent_device}에 에러 발생: 파일들"
+#: ../network-scripts/ifup-eth:365
+#, fuzzy
+msgid "Determining IPv6 information for ${DEVICE}..."
+msgstr "${DEVICE}에 관한 IP 정보를 얻고 있습니다..."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:804
-msgid "Given IPv6 MTU '$ipv6_mtu' is out of range"
-msgstr "지정하신 IPv6 MTU '$ipv6_mtu'가 범위에서 벗어납니다"
+#: ../network-scripts/ifup-ippp:55
+msgid "$*"
+msgstr "$*"
 
-#: ../sysconfig/network-scripts/ifup-aliases:340
-msgid "error in $FILE: IPADDR_START greater than IPADDR_END"
-msgstr "$FILE에 오류 발생: IPADDR_START가 IPADDR_END보다 큽니다"
+#: ../network-scripts/ifup-ippp:374
+msgid ""
+"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using "
+"encapsulation 'syncppp'"
+msgstr ""
+"주의: ipppd (커널 2.4.x 과 그 이상)은 'syncppp' 인캡슐레이션을 이용한 IPv6를 "
+"지원하지 않습니다"
 
-#: ../sysconfig/network-scripts/ifup-aliases:182
-msgid "error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
-msgstr "$FILE에 오류 발생: $devseen에 $parent_device:$DEVNUM 장치가 이미 존재합니다"
+#: ../network-scripts/ifup-ippp:376
+msgid "Warning: link doesn't support IPv6 using encapsulation 'rawip'"
+msgstr "주의: 링크는 'rawip' 인캡슐레이션을 사용하는 IPv6를 지원하지 않습니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1079
-msgid "Some IPv6 address(es) of ${device} remain still in 'tentative' state"
+#: ../network-scripts/ifup-ipv6:99
+msgid ""
+"Global IPv6 forwarding is enabled in configuration, but not currently "
+"enabled in kernel"
 msgstr ""
+"글로벌 IPv6 포워딩이 설정에서 활성화 되었습니다, 그러나 커널에서는그렇지 못합"
+"니다"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:100
-#: ../sysconfig/network-scripts/ifup-ipv6:119
+#: ../network-scripts/ifup-ipv6:100 ../network-scripts/ifup-ipv6:119
 msgid "Please restart network with '/sbin/service network restart'"
 msgstr "'/sbin/service network restart'로 네트워크를 다시 시작하시기 바랍니다"
 
-#: ../rc.d/init.d/functions:498
-msgid "  OK  "
-msgstr "  OK  "
-
-#: ../sysconfig/network-scripts/ifup-aliases:191
-msgid "error in $FILE: didn't specify device or ipaddr"
-msgstr "$FILE에 오류 발생: 장치 또는 IP주소가 지정되지 않았습니다"
-
-#: ../sysconfig/network-scripts/ifdown:33 ../sysconfig/network-scripts/ifup:49
-msgid "Users cannot control this device."
-msgstr "사용자가 이 장치를 제어할수 없습니다."
-
-#: ../sysconfig/network-scripts/ifup:81 ../sysconfig/network-scripts/ifup:96
-msgid "PHYSDEV should be set for device ${DEVICE}"
-msgstr "장치 ${DEVICE}를 위해 PHYSDEV가 설정되어야 합니다"
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:1031
-msgid "radvd not (properly) installed, triggering failed"
-msgstr "radvd가 (적절히) 설치되지 않았습니다, 트리거 작업 실패"
+#: ../network-scripts/ifup-ipv6:118
+msgid ""
+"Global IPv6 forwarding is disabled in configuration, but not currently "
+"disabled in kernel"
+msgstr ""
+"글로벌 IPv6 포워딩이 설치상에 비활성화되어 있습니다, 그러나 현재 커널상에서 "
+"비활성화 되어 있습니다"
 
-#: ../sysconfig/network-scripts/ifup-eth:210
-#: ../sysconfig/network-scripts/ifup-eth:349
-msgid " failed."
-msgstr " 실패."
+#: ../network-scripts/ifup-ipv6:157
+msgid ""
+"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
+msgstr ""
+"IPv6 개인 방식 '$IPV6_PRIVACY'를 활성화할 수 없습니다, 커널에서 지원되지 않습"
+"니다"
 
-#: ../rc.d/init.d/functions:406
-msgid "Usage: pidofproc [-p pidfile] {program}"
-msgstr "사용법: pidofproc [-p pidfile] {program}"
+#: ../network-scripts/ifup-ipv6:182
+msgid "Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+msgstr ""
+"'$DEVICE'로 부터 'tun6to4' 장치가 이미 켜져 있습니다. 먼저 종료하십시오."
 
-#: ../rc.d/init.d/network:233
-msgid "Configured devices:"
-msgstr "설정된 장치들:"
+#: ../network-scripts/ifup-ipv6:209
+msgid "Given IPv4 address '$ipv4addr' is not globally usable"
+msgstr "지정된 IPv4 주소 '$ipv4addr'는 시스템 전역적으로 사용할 수 없습니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:895
-msgid "Given IPv6 default device '$device' requires an explicit nexthop"
-msgstr "지정된 IPv6 기본 장치 '$device'에 nexthop가 명확하게 지정되지 않았습니다"
+#: ../network-scripts/ifup-ipv6:222
+msgid ""
+"IPv6to4 configuration needs an IPv4 address on related interface or "
+"otherwise specified"
+msgstr ""
+"IPv6to4 설정에서 특별히 다르게 지정되지 않은 한 관련 인터페이스에 IPv4 주소"
+"가 필요합니다."
 
-#: ../rc.d/init.d/functions:33
-#, fuzzy
-msgid "Starting $prog (via systemctl): "
-msgstr "$progbase 시작 중: "
+#: ../network-scripts/ifup-ipv6:237
+msgid ""
+"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of "
+"'$tunnelmtu', ignored"
+msgstr ""
+"주의: 6to4에 설정된 MTU '$IPV6TO4_MTU'이 '$tunnelmtu'의 최대 한계를 초과합니"
+"다. 무시합니다."
 
-#: ../sysconfig/network-scripts/ifdown:15
-#: ../sysconfig/network-scripts/ifdown:22
-msgid "usage: ifdown <configuration>"
-msgstr "사용법: ifdown <장치 명>"
+#: ../network-scripts/ifup-ipv6:251
+msgid "Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
+msgstr ""
+"주의: 인터페이스 'tun6to4' 는 'IPV6_DEFAULTGW'을 지원하지 않습니다, 무시합니"
+"다"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:287
+#: ../network-scripts/ifup-ipv6:287
 msgid ""
 "Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't"
-msgstr "6to4 와 RADVD IPv6 포워딩이 보통 활성화 되어 있어야 하는데, 그렇지 않습니다!"
+msgstr ""
+"6to4 와 RADVD IPv6 포워딩이 보통 활성화 되어 있어야 하는데, 그렇지 않습니다!"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:438
-#: ../sysconfig/network-scripts/network-functions-ipv6:495
-#: ../sysconfig/network-scripts/network-functions-ipv6:534
-msgid "Given device '$device' is not supported (arg 1)"
-msgstr "지정된 장치 '$device'는 지원되지 않습니다 (arg 1)"
+#: ../network-scripts/ifup-ipv6:300
+msgid "Error occurred while calculating the IPv6to4 prefix"
+msgstr "IPv6to4의 prefix를 계산하고 있는 도중 에러 발생"
 
-#: ../rc.d/init.d/network:166
-msgid "rootfs or /usr is on network filesystem, leaving network up"
+#: ../network-scripts/ifup-ipv6:303
+msgid "radvd control enabled, but config is not complete"
+msgstr "radvd 제어 활성화, 그러나 설정이 완벽히 끝나지 않았습니다!"
+
+#: ../network-scripts/ifup-ipv6:310
+msgid "6to4 configuration is not valid"
+msgstr "6to4 설정을 찾을수 없습니다."
+
+#: ../network-scripts/ifup-post:114
+msgid "/etc/resolv.conf was not updated: failed to create temporary file"
 msgstr ""
 
-#: ../rc.d/init.d/netconsole:128
-msgid "netconsole module loaded"
-msgstr "netconsole 모듈을 읽어옴"
+#: ../network-scripts/ifup-routes:6
+msgid "usage: ifup-routes <net-device> [<nickname>]"
+msgstr "사용법: ifup-routes <net-device> [<nickname>]"
 
-#: ../rc.d/init.d/functions:348 ../rc.d/init.d/functions:358
-#: ../rc.d/init.d/functions:358 ../rc.d/init.d/functions:373
-msgid "$base shutdown"
-msgstr "$base 종료"
+#: ../network-scripts/ifup-sit:63
+msgid "Missing remote IPv4 address of tunnel, configuration is not valid"
+msgstr "터널의 원거리 IPv4주소가 없습니다, 설정이 맞지 않습니다!"
 
-#: ../sysconfig/network-scripts/ifup-tunnel:56
+#: ../network-scripts/ifup-sit:71
+msgid "Device '$DEVICE' is already up, please shutdown first"
+msgstr "'$DEVICE' 장치가 이미 켜져 있습니다. 먼저 종료하십시오."
+
+#: ../network-scripts/ifup-tunnel:61
 msgid "Invalid tunnel type $TYPE"
 msgstr "잘못된 터널 유형 $TYPE"
 
-#: ../sysconfig/network-scripts/ifup:37
-msgid "$0: configuration for ${1} not found."
-msgstr "$0: $(1)의 설정을 찾을 수 없습니다."
+#: ../network-scripts/init.ipv6-global:161
+msgid "Usage: $0 {start|stop|reload|restart|showsysctl}"
+msgstr "사용법: $0 {start|stop|reload|restart|showsysctl}"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1071
+#: ../network-scripts/network-functions:401
 msgid ""
-"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' "
-"state"
+"Both 'DHCP_HOSTNAME=${DHCP_HOSTNAME}' and 'DHCP_FQDN=${DHCP_FQDN}' are "
+"configured... Using DHCP_FQDN."
 msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:86
-msgid ""
-"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' "
-"through device '$device'"
+#: ../network-scripts/network-functions:569
+msgid "Failed to set value '$value' [mode] to ${DEVICE} bonding device"
 msgstr ""
-"'No route to host' '$gatewayipv6' 게이트웨이를 통과하는'$networkipv6' 라우트를 '$device' "
-"장치를 이용하여 추가"
 
-#: ../rc.d/init.d/network:127 ../rc.d/init.d/network:134
-msgid "Bringing up interface $i: "
-msgstr "$i 인터페이스 활성화중 입니다: "
+#: ../network-scripts/network-functions:575
+msgid "Failed to set value '$value' [miimon] to ${DEVICE} bonding device"
+msgstr ""
 
-#: ../service:86
+#: ../network-scripts/network-functions:595
 msgid ""
-"Redirecting to /bin/systemctl ${ACTION}${OPTIONS:+ }${OPTIONS} "
-"${SERVICE_MANGLED}"
+"Failed to set '$arp_ip' value [arp_ip_target] to ${DEVICE} bonding device"
 msgstr ""
 
-#: ../sysconfig/network-scripts/ifdown-routes:6
-#, fuzzy
-msgid "usage: ifdown-routes <net-device> [<nickname>]"
-msgstr "사용법: ifup-routes <net-device> [<nickname>]"
+#: ../network-scripts/network-functions:603
+msgid ""
+"Failed to set '$value' value [arp_ip_target] to ${DEVICE} bonding device"
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-eth:51
-msgid "Bridge support not available: brctl not found"
-msgstr "브리지를 지원하지 않습니다: brctl를 찾을 수 없습니다"
+#: ../network-scripts/network-functions:608
+msgid "Failed to set '$value' value [$key] to ${DEVICE} bonding device"
+msgstr ""
 
-#: ../rc.d/init.d/network:236
-msgid "Currently active devices:"
-msgstr "현재 사용 중인 장치: "
+#: ../network-scripts/network-functions:681
+msgid "DEBUG     "
+msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:590
-msgid ""
-"Given remote address '$addressipv4tunnel' on tunnel device '$device' is "
-"already configured on device '$devnew'"
+#: ../network-scripts/network-functions:684
+msgid "ERROR     "
 msgstr ""
-"터널 장치 '$device'에 입력하신 원격 주소 '$addressipv4tunnel'는 이미 '$devnew' 장치에 사용되었습니다."
 
-#: ../sysconfig/network-scripts/ifdown-sit:40
-#: ../sysconfig/network-scripts/ifup-sit:58
-msgid ""
-"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and "
-"restart (IPv6) networking"
+#: ../network-scripts/network-functions:687
+msgid "WARN      "
 msgstr ""
-"여기는 장치 '$DEVICE'를 지원하지 않습니다, IPV6_AUTOTUNNEL 설정을 사용하고 (IPv6) 네크워크를 다시 "
-"시작하십시오."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:343
-msgid "Missing parameter 'IPv4 address' (arg 1)"
-msgstr "'IPv4 address' (arg 1) 변수가 없습니다"
+#: ../network-scripts/network-functions:690
+msgid "INFO      "
+msgstr ""
 
-#: ../rc.d/init.d/network:215
-msgid "Shutting down interface $i: "
-msgstr "인터페이스 $i (을)를 종료 중:  "
+#: ../network-scripts/network-functions-ipv6:56
+msgid "Missing parameter 'IPv6-network' (arg 1)"
+msgstr "'IPv6-network' (arg 1) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/ifup-ippp:374
-msgid ""
-"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using "
-"encapsulation 'syncppp'"
-msgstr "주의: ipppd (커널 2.4.x 과 그 이상)은 'syncppp' 인캡슐레이션을 이용한 IPv6를 지원하지 않습니다"
+#: ../network-scripts/network-functions-ipv6:61
+msgid "Missing parameter 'IPv6-gateway' (arg 2)"
+msgstr "'IPv6-gateway' (arg 2) 변수가 없음"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:99
+#: ../network-scripts/network-functions-ipv6:86
 msgid ""
-"Global IPv6 forwarding is enabled in configuration, but not currently "
-"enabled in kernel"
-msgstr "글로벌 IPv6 포워딩이 설정에서 활성화 되었습니다, 그러나 커널에서는그렇지 못합니다"
+"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' "
+"through device '$device'"
+msgstr ""
+"'No route to host' '$gatewayipv6' 게이트웨이를 통과하는'$networkipv6' 라우트"
+"를 '$device' 장치를 이용하여 추가"
 
-#: ../rc.d/init.d/functions:39
-#, fuzzy
-msgid "Reloading $prog configuration (via systemctl): "
-msgstr "$prog 설정을 다시 읽어오는 중입니다:   "
+#: ../network-scripts/network-functions-ipv6:89
+msgid "Unknown error"
+msgstr "알 수 없는 오류"
 
-#: ../rc.d/init.d/netconsole:108
-msgid "Initializing netconsole"
-msgstr "netconsole 초기화하는 중"
+#: ../network-scripts/network-functions-ipv6:114
+msgid "Tunnel device 'sit0' enabling didn't work"
+msgstr "터널 장치 'sit0'를 활성화하지 못했습니다"
 
-#: ../sysconfig/network-scripts/ifup-ippp:55
-msgid "$*"
-msgstr "$*"
+#: ../network-scripts/network-functions-ipv6:140
+#: ../network-scripts/network-functions-ipv6:203
+#: ../network-scripts/network-functions-ipv6:232
+#: ../network-scripts/network-functions-ipv6:312
+#: ../network-scripts/network-functions-ipv6:427
+#: ../network-scripts/network-functions-ipv6:489
+#: ../network-scripts/network-functions-ipv6:523
+#: ../network-scripts/network-functions-ipv6:565
+#: ../network-scripts/network-functions-ipv6:643
+#: ../network-scripts/network-functions-ipv6:701
+#: ../network-scripts/network-functions-ipv6:754
+#: ../network-scripts/network-functions-ipv6:793
+#: ../network-scripts/network-functions-ipv6:921
+#: ../network-scripts/network-functions-ipv6:1054
+msgid "Missing parameter 'device' (arg 1)"
+msgstr "'device' (arg 1) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:855
-msgid ""
-"Given IPv6 default gateway '$address' is link-local, but no scope or gateway"
-" device is specified"
-msgstr "지정된 IPv6 기본 게이트웨이 '$address'는 링크-로컬 주소이지만 범위나 게이트웨이 주소를 지정하지 않으셨습니다"
+#: ../network-scripts/network-functions-ipv6:145
+msgid "Missing parameter 'IPv6-address' (arg 2)"
+msgstr "'IPv6-address' (arg 2) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions:645
-msgid "INFO      "
-msgstr ""
+#: ../network-scripts/network-functions-ipv6:159
+msgid "Device '$device' doesn't exist"
+msgstr "'$device' 장치가 존재하지 않습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:610
-msgid "Tunnel device '$device' bringing up didn't work"
-msgstr "터널 장치인 '$device'를 시작할 수 없습니다"
+#: ../network-scripts/network-functions-ipv6:165
+msgid "Device '$device' enabling didn't work"
+msgstr "'$device' 장치를 활성화하지 못했습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:993
-msgid "Unsupported mechanism '$mechanism' for sending trigger to radvd"
-msgstr "'$mechanism' 메커니즘은 지원되지 않으므로 radvd에 트리거를 보낼 수 없습니다"
+#: ../network-scripts/network-functions-ipv6:186
+msgid "Cannot add IPv6 address '$address' on dev '$device'"
+msgstr "IPv6 주소인 '$address'를 dev '$device'에 추가할 수 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:398
+#: ../network-scripts/network-functions-ipv6:343
+msgid "Missing parameter 'IPv4 address' (arg 1)"
+msgstr "'IPv4 address' (arg 1) 변수가 없습니다"
+
+#: ../network-scripts/network-functions-ipv6:383
+msgid "Missing parameter 'address' (arg 1)"
+msgstr "'address' (arg 1) 변수가 주어지지 않았습니다"
+
+#: ../network-scripts/network-functions-ipv6:394
+msgid "Given address '$addr' is not a global IPv4 one (arg 1)"
+msgstr ""
+"지정된 주소 '$addr'는 시스템 전역적으로 사용가능한 IPv4 주소가 아닙니다 (arg "
+"1)"
+
+#: ../network-scripts/network-functions-ipv6:398
 msgid "Given address '$addr' is not a valid IPv4 one (arg 1)"
 msgstr "지정된 '$addr' 주소는 올바른 IPv4 주소 (arg 1)가 아닙니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:432
+#: ../network-scripts/network-functions-ipv6:432
 msgid "Missing parameter 'global IPv4 address' (arg 2)"
 msgstr "'global IPv4 address' (arg 2) 변수가 없음"
 
-#: ../rc.d/init.d/netconsole:131
-msgid "netconsole module not loaded"
-msgstr "netconsole 모듈을 읽어오지 않음"
+#: ../network-scripts/network-functions-ipv6:438
+#: ../network-scripts/network-functions-ipv6:495
+#: ../network-scripts/network-functions-ipv6:534
+msgid "Given device '$device' is not supported (arg 1)"
+msgstr "지정된 장치 '$device'는 지원되지 않습니다 (arg 1)"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:89
-msgid "Unknown error"
-msgstr "알 수 없는 오류"
+#: ../network-scripts/network-functions-ipv6:528
+msgid "Missing parameter 'local IPv4 address' (arg 2)"
+msgstr "'local IPv4 address' (arg 2) 변수가 없습니다"
 
-#: ../rc.d/init.d/functions:432
-msgid "Usage: status [-p pidfile] {program}"
-msgstr "사용법: status [-p pidfile] {program}"
+#: ../network-scripts/network-functions-ipv6:570
+msgid "Missing parameter 'IPv4-tunnel address' (arg 2)"
+msgstr "'IPv4-tunnel address' (arg 2) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:310
-msgid "6to4 configuration is not valid"
-msgstr "6to4 설정을 찾을수 없습니다."
+#: ../network-scripts/network-functions-ipv6:590
+msgid ""
+"Given remote address '$addressipv4tunnel' on tunnel device '$device' is "
+"already configured on device '$devnew'"
+msgstr ""
+"터널 장치 '$device'에 입력하신 원격 주소 '$addressipv4tunnel'는 이미 "
+"'$devnew' 장치에 사용되었습니다."
 
-#: ../sysconfig/network-scripts/ifup-aliases:335
-msgid "error in $FILE: IPADDR_START and IPADDR_END don't agree"
-msgstr "$FILE에 오류 발생: IPADDR_START 와 IPADDR_END가 일치하지 않습니다"
+#: ../network-scripts/network-functions-ipv6:603
+msgid "Tunnel device '$device' creation didn't work"
+msgstr "터널 장치 '$device'를 만드는데 실패했습니다"
 
-#: ../rc.d/init.d/functions:364 ../rc.d/init.d/functions:364
-msgid "$base $killlevel"
-msgstr "$base $killlevel"
+#: ../network-scripts/network-functions-ipv6:610
+msgid "Tunnel device '$device' bringing up didn't work"
+msgstr "터널 장치인 '$device'를 시작할 수 없습니다"
 
-#: ../sysconfig/network-scripts/ifup-eth:200
-msgid " failed; no link present.  Check cable?"
-msgstr " 실패; 연결이 존재하지 않습니다.  케이블을 확인하시겠습니까?"
+#: ../network-scripts/network-functions-ipv6:706
+msgid "Missing parameter 'selection' (arg 2)"
+msgstr "'selection' (arg 2) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:118
-msgid ""
-"Global IPv6 forwarding is disabled in configuration, but not currently "
-"disabled in kernel"
-msgstr "글로벌 IPv6 포워딩이 설치상에 비활성화되어 있습니다, 그러나 현재 커널상에서 비활성화 되어 있습니다"
+#: ../network-scripts/network-functions-ipv6:710
+msgid "Unsupported selection '$selection' specified (arg 2)"
+msgstr "선택하신 '$selection'은 지원되지 않습니다 (arg 2)"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:165
-msgid "Device '$device' enabling didn't work"
-msgstr "'$device' 장치를 활성화하지 못했습니다"
+#: ../network-scripts/network-functions-ipv6:798
+msgid "Missing parameter 'IPv6 MTU' (arg 2)"
+msgstr "'IPv6 MTU' (arg 2) 변수가 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:186
-msgid "Cannot add IPv6 address '$address' on dev '$device'"
-msgstr "IPv6 주소인 '$address'를 dev '$device'에 추가할 수 없습니다"
+#: ../network-scripts/network-functions-ipv6:804
+msgid "Given IPv6 MTU '$ipv6_mtu' is out of range"
+msgstr "지정하신 IPv6 MTU '$ipv6_mtu'가 범위에서 벗어납니다"
+
+#: ../network-scripts/network-functions-ipv6:841
+msgid "Given IPv6 default gateway '$address' is not in proper format"
+msgstr "입력하신 IPv6 기본 게이트웨이 '$address'의 형식이 올바르지 않습니다"
 
-#: ../service:89
+#: ../network-scripts/network-functions-ipv6:847
 msgid ""
-"The service command supports only basic LSB actions (start, stop, restart, "
-"try-restart, reload, force-reload, status). For other actions, please try to"
-" use systemctl."
+"Given IPv6 default gateway '$address' has scope '$device_scope' defined, "
+"given default gateway device '$device' will be not used"
 msgstr ""
+"지정된 IPv6 기본 게이트웨이 '$address'는 범위 '$device_scope'가 지정되어 있으"
+"므로 입력하신 기본 게이트웨이 장치 '$device'는 사용되지 않을 것입니다"
 
-#: ../sysconfig/network-scripts/ifup-ippp:376
-msgid "Warning: link doesn't support IPv6 using encapsulation 'rawip'"
-msgstr "주의: 링크는 'rawip' 인캡슐레이션을 사용하는 IPv6를 지원하지 않습니다."
-
-#: ../sys-unconfig:6
-msgid "Usage: sys-unconfig"
-msgstr "사용법: sys-unconfig"
+#: ../network-scripts/network-functions-ipv6:855
+msgid ""
+"Given IPv6 default gateway '$address' is link-local, but no scope or gateway "
+"device is specified"
+msgstr ""
+"지정된 IPv6 기본 게이트웨이 '$address'는 링크-로컬 주소이지만 범위나 게이트웨"
+"이 주소를 지정하지 않으셨습니다"
 
-#: ../sysconfig/network-scripts/ifup-routes:6
-msgid "usage: ifup-routes <net-device> [<nickname>]"
-msgstr "사용법: ifup-routes <net-device> [<nickname>]"
+#: ../network-scripts/network-functions-ipv6:895
+msgid "Given IPv6 default device '$device' requires an explicit nexthop"
+msgstr ""
+"지정된 IPv6 기본 장치 '$device'에 nexthop가 명확하게 지정되지 않았습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:570
-msgid "Missing parameter 'IPv4-tunnel address' (arg 2)"
-msgstr "'IPv4-tunnel address' (arg 2) 변수가 없습니다"
+#: ../network-scripts/network-functions-ipv6:898
+msgid "Given IPv6 default device '$device' doesn't exist or isn't up"
+msgstr "지정된 IPv6 기본 장치 '$device'는 존재하지 않거나 작동 중이지 않습니다"
 
-#: ../rc.d/init.d/netconsole:118
-msgid "Disabling netconsole"
-msgstr "netconsole 비활성화 중: "
+#: ../network-scripts/network-functions-ipv6:904
+msgid "No parameters given to setup a default route"
+msgstr "기본 라우트를 설정할 변수가 주어지지 않았습니다"
 
-#: ../rc.d/init.d/network:221
-msgid "Shutting down loopback interface: "
-msgstr "loopback 인터페이스 종료 중:  "
+#: ../network-scripts/network-functions-ipv6:959
+msgid "No reason given for sending trigger to radvd"
+msgstr "radvd에 트리거를 보내는 이유가 명시되지 않았습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:710
-msgid "Unsupported selection '$selection' specified (arg 2)"
-msgstr "선택하신 '$selection'은 지원되지 않습니다 (arg 2)"
+#: ../network-scripts/network-functions-ipv6:964
+msgid "Unsupported reason '$reason' for sending trigger to radvd"
+msgstr "'$reason' 이유는 지원되지 않으므로 radvd에 트리거를 보낼 수 없습니다"
 
-#: ../rc.d/init.d/functions:52
-msgid "Reloading systemd: "
+#: ../network-scripts/network-functions-ipv6:993
+msgid "Unsupported mechanism '$mechanism' for sending trigger to radvd"
 msgstr ""
+"'$mechanism' 메커니즘은 지원되지 않으므로 radvd에 트리거를 보낼 수 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:959
-msgid "No reason given for sending trigger to radvd"
-msgstr "radvd에 트리거를 보내는 이유가 명시되지 않았습니다"
+#: ../network-scripts/network-functions-ipv6:1005
+msgid "Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd"
+msgstr ""
+"지정된 pidfile '$pidfile'이 존재하지 않아서 radvd에 트리거를 보낼 수 없습니"
+"다."
 
-#: ../sysconfig/network-scripts/ifup-eth:207
-#: ../sysconfig/network-scripts/ifup-eth:347
-msgid " done."
-msgstr " 완료."
+#: ../network-scripts/network-functions-ipv6:1014
+msgid "Pidfile '$pidfile' is empty, cannot send trigger to radvd"
+msgstr "Pidfile '$pidfile'이 비어있어서 radvd에 트리거를 보낼 수 없습니다."
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:56
-msgid "Missing parameter 'IPv6-network' (arg 1)"
-msgstr "'IPv6-network' (arg 1) 변수가 없습니다"
+#: ../network-scripts/network-functions-ipv6:1031
+msgid "radvd not (properly) installed, triggering failed"
+msgstr "radvd가 (적절히) 설치되지 않았습니다, 트리거 작업 실패"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1005
-msgid "Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd"
-msgstr "지정된 pidfile '$pidfile'이 존재하지 않아서 radvd에 트리거를 보낼 수 없습니다."
+#: ../network-scripts/network-functions-ipv6:1066
+msgid "Duplicate Address Detection: Duplicate addresses detected"
+msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:528
-msgid "Missing parameter 'local IPv4 address' (arg 2)"
-msgstr "'local IPv4 address' (arg 2) 변수가 없습니다"
+#: ../network-scripts/network-functions-ipv6:1067
+msgid "Duplicate Address Detection: Please, fix your network configuration"
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-aliases:269
+#: ../network-scripts/network-functions-ipv6:1071
 msgid ""
-"Determining if ip address ${IPADDR} is already in use for device "
-"${parent_device}..."
+"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' "
+"state"
 msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-aliases:119
-msgid "Missing config file $PARENTCONFIG."
-msgstr "설정 파일인 $PARENTCONFIG 없음."
+#: ../network-scripts/network-functions-ipv6:1079
+msgid "Some IPv6 address(es) of ${device} remain still in 'tentative' state"
+msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1080
+#: ../network-scripts/network-functions-ipv6:1080
 msgid "Run 'ip -6 addr show dev ${device} scope global tentative' to see more"
 msgstr ""
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1067
-msgid "Duplicate Address Detection: Please, fix your network configuration"
+#: ../usr/sbin/service:95
+msgid ""
+"Redirecting to /bin/systemctl ${ACTION}${OPTIONS:+ }${OPTIONS} "
+"${SERVICE_MANGLED}"
 msgstr ""
 
-#: ../rc.d/init.d/functions:581 ../rc.d/init.d/functions:581
-msgid "$STRING"
-msgstr "$STRING"
-
-#: ../rc.d/init.d/functions:487
-msgid "${base} dead but subsys locked"
-msgstr "${base}가 종료되었으나 subsys가 잠겨있습니다"
-
-#: ../sysconfig/network-scripts/ifup-aliases:177
-msgid "error in $FILE: already seen ipaddr $IPADDR in $ipseen"
-msgstr "$FILE에 오류 발생: $ipseen에 ip주소 $IPADDR가 이미 존재합니다"
-
-#: ../sysconfig/network-scripts/ifup-eth:265
+#: ../usr/sbin/service:98
 msgid ""
-"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}."
+"The service command supports only basic LSB actions (start, stop, restart, "
+"try-restart, reload, force-reload, status). For other actions, please try to "
+"use systemctl."
 msgstr ""
 
-#: ../rc.d/init.d/functions:36
+#: ../etc/rc.d/init.d/functions:33
+#, fuzzy
+msgid "Starting $prog (via systemctl): "
+msgstr "$progbase 시작 중: "
+
+#: ../etc/rc.d/init.d/functions:36
 #, fuzzy
 msgid "Stopping $prog (via systemctl): "
 msgstr "$prog 데몬을 멈춥니다: "
 
-#: ../sysconfig/network-scripts/ifup-eth:272
+#: ../etc/rc.d/init.d/functions:39
 #, fuzzy
-msgid "Error adding address ${ipaddr[$idx]} for ${DEVICE}."
-msgstr "${DEVICE}를 위한 주소 ${IPADDR}를 추가 하는데 에러 발생"
+msgid "Reloading $prog configuration (via systemctl): "
+msgstr "$prog 설정을 다시 읽어오는 중입니다:   "
 
-#: ../rc.d/init.d/netconsole:99
-msgid "netconsole: can't resolve MAC address of $SYSLOGADDR"
-msgstr "netconsole: $SYSLOGADDR의 MAC 주소를 해석할 수 없습니다"
+#: ../etc/rc.d/init.d/functions:42
+#, fuzzy
+msgid "Restarting $prog (via systemctl): "
+msgstr "$prog 다시 시작 중:  "
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:1014
-msgid "Pidfile '$pidfile' is empty, cannot send trigger to radvd"
-msgstr "Pidfile '$pidfile'이 비어있어서 radvd에 트리거를 보낼 수 없습니다."
+#: ../etc/rc.d/init.d/functions:52
+msgid "Reloading systemd: "
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup-eth:234
-msgid "Failed to bring up ${DEVICE}."
-msgstr "${DEVICE} 활성화에 실패했습니다."
+#: ../etc/rc.d/init.d/functions:236 ../etc/rc.d/init.d/functions:274
+msgid "$0: Usage: daemon [+/-nicelevel] {program}"
+msgstr "$0: 사용법: daemon [+/-nicelevel] {program}"
+
+#: ../etc/rc.d/init.d/functions:304
+msgid "$base startup"
+msgstr "$base 시작"
+
+#: ../etc/rc.d/init.d/functions:314 ../etc/rc.d/init.d/functions:333
+msgid "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+msgstr "사용법: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+
+#: ../etc/rc.d/init.d/functions:323 ../etc/rc.d/init.d/functions:450
+msgid "-b option can be used only with -p"
+msgstr ""
+
+#: ../etc/rc.d/init.d/functions:324
+#, fuzzy
+#| msgid "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+msgid "Usage: killproc -p pidfile -b binary program"
+msgstr "사용법: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+
+#: ../etc/rc.d/init.d/functions:353 ../etc/rc.d/init.d/functions:363
+#: ../etc/rc.d/init.d/functions:378
+msgid "$base shutdown"
+msgstr "$base 종료"
+
+#: ../etc/rc.d/init.d/functions:369
+msgid "$base $killlevel"
+msgstr "$base $killlevel"
+
+#: ../etc/rc.d/init.d/functions:396
+msgid "Usage: pidfileofproc {program}"
+msgstr "사용법: pidfileofproc {program}"
+
+#: ../etc/rc.d/init.d/functions:411
+msgid "Usage: pidofproc [-p pidfile] {program}"
+msgstr "사용법: pidofproc [-p pidfile] {program}"
+
+#: ../etc/rc.d/init.d/functions:437
+msgid "Usage: status [-p pidfile] {program}"
+msgstr "사용법: status [-p pidfile] {program}"
+
+#: ../etc/rc.d/init.d/functions:451
+#, fuzzy
+#| msgid "Usage: status [-p pidfile] {program}"
+msgid "Usage: status -p pidfile -b binary program"
+msgstr "사용법: status [-p pidfile] {program}"
+
+#: ../etc/rc.d/init.d/functions:478 ../etc/rc.d/init.d/functions:484
+msgid "${base} (pid $pid) is running..."
+msgstr "${base} (pid $pid)를 실행하고 있습니다.."
+
+#: ../etc/rc.d/init.d/functions:488
+msgid "${base} dead but pid file exists"
+msgstr "$(base)가 종료되었지만 pid 파일이 존재합니다"
+
+#: ../etc/rc.d/init.d/functions:492
+msgid "${base} status unknown due to insufficient privileges."
+msgstr ""
+
+#: ../etc/rc.d/init.d/functions:501
+msgid "${base} dead but subsys locked"
+msgstr "${base}가 종료되었으나 subsys가 잠겨있습니다"
+
+#: ../etc/rc.d/init.d/functions:504
+msgid "${base} is stopped"
+msgstr "${base}가 정지되었습니다"
+
+#: ../etc/rc.d/init.d/functions:512
+msgid "  OK  "
+msgstr "  OK  "
+
+#: ../etc/rc.d/init.d/functions:523
+msgid "FAILED"
+msgstr "실패"
+
+#: ../etc/rc.d/init.d/functions:534
+msgid "PASSED"
+msgstr "통과"
+
+#: ../etc/rc.d/init.d/functions:545
+msgid "WARNING"
+msgstr "주의"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:157
+#: ../etc/rc.d/init.d/functions:595
+msgid "$STRING"
+msgstr "$STRING"
+
+#: ../etc/rc.d/init.d/network:52
 msgid ""
-"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
-msgstr "IPv6 개인 방식 '$IPV6_PRIVACY'를 활성화할 수 없습니다, 커널에서 지원되지 않습니다"
+"You are using 'network' service provided by 'network-scripts', which are now "
+"deprecated."
+msgstr ""
 
-#: ../rc.d/init.d/network:146
+#: ../etc/rc.d/init.d/network:54
+msgid ""
+"It is advised to switch to 'NetworkManager' instead for network management."
+msgstr ""
+
+#: ../etc/rc.d/init.d/network:77
+msgid "Bringing up loopback interface: "
+msgstr "loopback 인터페이스 활성화중 입니다: "
+
+#: ../etc/rc.d/init.d/network:81
+msgid "No 802.1Q VLAN support available in kernel."
+msgstr "커널에서 802.1Q VLAN을 지원하지 않습니다."
+
+#: ../etc/rc.d/init.d/network:132 ../etc/rc.d/init.d/network:139
+msgid "Bringing up interface $i: "
+msgstr "$i 인터페이스 활성화중 입니다: "
+
+#: ../etc/rc.d/init.d/network:151
 #, fuzzy
 msgid "Legacy static-route support not available: /sbin/route not found"
 msgstr "브리지를 지원하지 않습니다: brctl를 찾을 수 없습니다"
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:114
-msgid "Tunnel device 'sit0' enabling didn't work"
-msgstr "터널 장치 'sit0'를 활성화하지 못했습니다"
-
-#: ../sysconfig/network-scripts/ifup-ipv6:182
-msgid "Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
-msgstr "'$DEVICE'로 부터 'tun6to4' 장치가 이미 켜져 있습니다. 먼저 종료하십시오."
-
-#: ../sysconfig/network-scripts/network-functions-ipv6:847
+#: ../etc/rc.d/init.d/network:178
 msgid ""
-"Given IPv6 default gateway '$address' has scope '$device_scope' defined, "
-"given default gateway device '$device' will be not used"
+"Target is not reachable, but timeout was already reached. Continuing anyway."
 msgstr ""
-"지정된 IPv6 기본 게이트웨이 '$address'는 범위 '$device_scope'가 지정되어 있으므로 입력하신 기본 게이트웨이 장치"
-" '$device'는 사용되지 않을 것입니다"
 
-#: ../rc.d/init.d/netconsole:85
-msgid "Unable to resolve IP address specified in /etc/sysconfig/netconsole"
+#: ../etc/rc.d/init.d/network:189
+msgid "rootfs or /usr is on network filesystem, leaving network up"
 msgstr ""
 
-#: ../rc.d/init.d/functions:464 ../rc.d/init.d/functions:470
-msgid "${base} (pid $pid) is running..."
-msgstr "${base} (pid $pid)를 실행하고 있습니다.."
+#: ../etc/rc.d/init.d/network:199
+msgid "system is shutting down, leaving interfaces up as requested"
+msgstr ""
 
-#: ../sysconfig/network-scripts/ifup:104
-msgid "No 802.1Q VLAN support available in kernel for device ${DEVICE}"
-msgstr "${DEVICE} 장치에 사용되는 커널에서 802.1Q VLAN을 지원하지 않습니다."
+#: ../etc/rc.d/init.d/network:249
+msgid "Shutting down interface $i: "
+msgstr "인터페이스 $i (을)를 종료 중:  "
 
-#: ../sysconfig/network-scripts/network-functions-ipv6:898
-msgid "Given IPv6 default device '$device' doesn't exist or isn't up"
-msgstr "지정된 IPv6 기본 장치 '$device'는 존재하지 않거나 작동 중이지 않습니다"
+#: ../etc/rc.d/init.d/network:255
+msgid "Shutting down loopback interface: "
+msgstr "loopback 인터페이스 종료 중:  "
 
-#: ../sysconfig/network-scripts/ifup-ipv6:209
-msgid "Given IPv4 address '$ipv4addr' is not globally usable"
-msgstr "지정된 IPv4 주소 '$ipv4addr'는 시스템 전역적으로 사용할 수 없습니다."
+#: ../etc/rc.d/init.d/network:267
+msgid "Configured devices:"
+msgstr "설정된 장치들:"
 
-#: ../sysconfig/network-scripts/ifup-ipv6:300
-msgid "Error occurred while calculating the IPv6to4 prefix"
-msgstr "IPv6to4의 prefix를 계산하고 있는 도중 에러 발생"
+#: ../etc/rc.d/init.d/network:270
+msgid "Currently active devices:"
+msgstr "현재 사용 중인 장치: "
 
-#: ../rc.d/init.d/functions:42
+#: ../etc/rc.d/init.d/network:280
 #, fuzzy
-msgid "Restarting $prog (via systemctl): "
-msgstr "$prog 다시 시작 중:  "
+#| msgid "Usage: $0 {start|stop|status|restart|reload|force-reload}"
+msgid "Usage: $0 {start|stop|status|restart|force-reload}"
+msgstr "사용법: $0 {start|stop|status|restart|reload|force-reload}"
+
+#~ msgid "Server address not specified in /etc/sysconfig/netconsole"
+#~ msgstr "/etc/sysconfig/netconsole에 서버 주소가 명시되어 있지 않음 "
+
+#~ msgid "Usage: $0 {start|stop|status|restart|condrestart}"
+#~ msgstr "사용법: $0 {start|stop|status|restart|condrestart}"
+
+#~ msgid "netconsole module loaded"
+#~ msgstr "netconsole 모듈을 읽어옴"
+
+#~ msgid "Bridge support not available: brctl not found"
+#~ msgstr "브리지를 지원하지 않습니다: brctl를 찾을 수 없습니다"
+
+#~ msgid "Initializing netconsole"
+#~ msgstr "netconsole 초기화하는 중"
+
+#~ msgid "netconsole module not loaded"
+#~ msgstr "netconsole 모듈을 읽어오지 않음"
+
+#~ msgid "Usage: sys-unconfig"
+#~ msgstr "사용법: sys-unconfig"
+
+#~ msgid "Disabling netconsole"
+#~ msgstr "netconsole 비활성화 중: "
+
+#~ msgid "netconsole: can't resolve MAC address of $SYSLOGADDR"
+#~ msgstr "netconsole: $SYSLOGADDR의 MAC 주소를 해석할 수 없습니다"