Coalesce the multiple rcX and ttyX jobs into single files.

Adjust other jobs accordingly.

Use a configuration parameter for what ttys to start.

22 files changed, 23 insertions, 291 deletions

diff --git a/init/console.conf b/init/console.conf
deleted file mode 100644
index 732a3fa9..00000000
--- a/init/console.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# console - getty
-#
-# This service maintains a getty on console from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty console
diff --git a/init/prefdm.conf b/init/prefdm.conf
index 7098bd76..d47356c7 100644
--- a/init/prefdm.conf
+++ b/init/prefdm.conf
@@ -2,7 +2,7 @@
 #
 # Starts gdm/xdm/etc by preference
 
-start on stopped rc5
+start on stopped rc RUNLEVEL=5
 
 stop on runlevel [!5]
 
diff --git a/init/quit-plymouth.conf b/init/quit-plymouth.conf
index 13ac3880..8b2e6f6a 100644
--- a/init/quit-plymouth.conf
+++ b/init/quit-plymouth.conf
@@ -5,10 +5,7 @@
 # this completes before the getty starts.
 # prefdm handles quit differently, though.
 
-start on runlevel S
-start on stopping rc2
-start on stopping rc3
-start on stopping rc4
+start on runlevel S or stopping rc RUNLEVEL=[234]
 
 script
 	 /usr/bin/plymouth quit || :
diff --git a/init/rc0.conf b/init/rc0.conf
deleted file mode 100644
index 11ce5a51..00000000
--- a/init/rc0.conf
+++ /dev/null
@@ -1,25 +0,0 @@
-# rc0 - runlevel 0 compatibility
-#
-# This task runs the old sysv-rc runlevel 0 ("halt/poweroff") scripts with
-# the decision as to whether to halt or power off the system left up to the
-# script (and thus /etc/default/poweroff).
-
-start on runlevel 0
-
-stop on runlevel [!0]
-
-console output
-script
-	set $(runlevel || true)
-	if [ "$2" != "0" ] && [ "$2" != "6" ]; then
-	    set $(runlevel --set 0 || true)
-        fi
-
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 0
-end script
diff --git a/init/rc1.conf b/init/rc1.conf
deleted file mode 100644
index 38397b31..00000000
--- a/init/rc1.conf
+++ /dev/null
@@ -1,29 +0,0 @@
-# rc1 - runlevel 1 compatibility
-#
-# This task runs the old sysv-rc runlevel 1 ("single-user") scripts. 
-# /etc/rc.d/rc 1 will run the /etc/rc.d/rc1.d scripts.
-# telinit S will run whichever task has "start on runlevel S",
-# normally /etc/event.d/rcS-sulogin
-
-start on runlevel 1
-
-stop on runlevel [!1]
-
-console output
-script
-	set $(runlevel --set 1 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 1
-end script
-post-stop script
-	clear
-	TEXTDOMAIN=initscripts
-	. /etc/profile.d/lang.sh 2>/dev/null
-	echo $"Telling INIT to go to single user mode."
-	exec telinit S
-end script
diff --git a/init/rc2.conf b/init/rc2.conf
deleted file mode 100644
index 6cc4d884..00000000
--- a/init/rc2.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc2 - runlevel 2 compatibility
-#
-# This task runs the old sysv-rc runlevel 2 ("multi-user") scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 2
-
-stop on runlevel [!2]
-
-console output
-script
-	set $(runlevel --set 2 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 2
-end script
diff --git a/init/rc3.conf b/init/rc3.conf
deleted file mode 100644
index 47a4a639..00000000
--- a/init/rc3.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc3 - runlevel 3 compatibility
-#
-# This task runs the old sysv-rc runlevel 3 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 3
-
-stop on runlevel [!3]
-
-console output
-script
-	set $(runlevel --set 3 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 3
-end script
diff --git a/init/rc4.conf b/init/rc4.conf
deleted file mode 100644
index 8e079f0e..00000000
--- a/init/rc4.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc4 - runlevel 4 compatibility
-#
-# This task runs the old sysv-rc runlevel 4 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 4
-
-stop on runlevel [!4]
-
-console output
-script
-	set $(runlevel --set 4 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 4
-end script
diff --git a/init/rc5.conf b/init/rc5.conf
deleted file mode 100644
index 0ef6a400..00000000
--- a/init/rc5.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# rc5 - runlevel 5 compatibility
-#
-# This task runs the old sysv-rc runlevel 5 (user defined) scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel 5
-
-stop on runlevel [!5]
-
-console output
-script
-	set $(runlevel --set 5 || true)
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 5
-end script
diff --git a/init/rc6.conf b/init/rc6.conf
deleted file mode 100644
index f9df8b4a..00000000
--- a/init/rc6.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# rc6 - runlevel 6 compatibility
-#
-# This task runs the old sysv-rc runlevel 6 ("reboot") scripts.
-
-start on runlevel 6
-
-stop on runlevel [!6]
-
-console output
-script
-	set $(runlevel || true)
-	if [ "$2" != "0" ] && [ "$2" != "6" ]; then
-	    set $(runlevel --set 6 || true)
-        fi
-
-	if [ "$1" != "unknown" ]; then
-	    PREVLEVEL=$1
-	    RUNLEVEL=$2
-	    export PREVLEVEL RUNLEVEL
-	fi
-
-	exec /etc/rc.d/rc 6
-end script
diff --git a/init/rcS-sulogin.conf b/init/rcS-sulogin.conf
index d3aa20d1..4f1f1f13 100644
--- a/init/rcS-sulogin.conf
+++ b/init/rcS-sulogin.conf
@@ -5,16 +5,15 @@
 
 start on runlevel S
 
-stop on runlevel
+stop on runlevel [!S]
 
 console owner
 script
-	runlevel --set S >/dev/null || true
 	plymouth --hide-splash || true
 	exec /bin/bash
 end script
 post-stop script
-	if [ "$1" = "S" ]; then
+	if [ "$RUNLEVEL" = "S" ]; then
 		runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
 		[ -z "$runlevel" ] && runlevel="3"
 		exec telinit $runlevel
diff --git a/init/rcS.conf b/init/rcS.conf
index 1c0a54be..51d52312 100644
--- a/init/rcS.conf
+++ b/init/rcS.conf
@@ -6,18 +6,15 @@ start on startup
 
 stop on runlevel
 
+task
+
 # Note: there can be no previous runlevel here, if we have one it's bad
 # information (we enter rc1 not rcS for maintenance).  Run /etc/rc.d/rc
 # without information so that it defaults to previous=N runlevel=S.
 console output
-script
-	runlevel --set S >/dev/null || true
-
-	/etc/rc.d/rc.sysinit 
-	runlevel --reboot || true
-end script
+exec /etc/rc.d/rc.sysinit
 post-stop script
-	if [ "$UPSTART_EVENT" = "startup" ]; then
+	if [ "$UPSTART_EVENTS" = "startup" ]; then
 		runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
 		[ -z "$runlevel" ] && runlevel="3"
 		for t in $(cat /proc/cmdline); do
diff --git a/init/serial.conf b/init/serial.conf
index 660e93bd..9d6ad0ef 100644
--- a/init/serial.conf
+++ b/init/serial.conf
@@ -12,31 +12,31 @@
 # on serial even if it's not the console, create your own event by copying
 # /etc/event.d/tty[2-6], and changing the getty line in that file.
 
-start on fedora.serial-console-available *
+start on fedora.serial-console-available DEV=*
 stop on runlevel [016]
 
-instance
+instance $DEV
 pre-start script
 	while /bin/true ; do
-		LANG=C /sbin/initctl status rcS | grep -wq "rcS (stop) waiting" && break
+		LANG=C /sbin/initctl status rcS | grep -wq "rcS stop/waiting" && break
 		sleep 1
 	done
 	while /bin/true ; do 
 		runlevel=$(/sbin/runlevel | /bin/awk '{ print $2 }')
 		case "$runlevel" in 
 			2|3|4|5)
-				LANG=C /sbin/initctl status rc$runlevel | grep -wq "rc$runlevel (stop) waiting" && break
+				LANG=C /sbin/initctl status rc$runlevel | grep -wq "rc$runlevel stop/waiting" && break
 				;;
 			*)
 				;;
 		esac
 		sleep 1
 	done
-	/sbin/securetty $1
+	/sbin/securetty $DEV
 end script
-exec /sbin/agetty /dev/$1 $2 vt100-nav
+exec /sbin/agetty /dev/$DEV $SPEED vt100-nav
 post-stop script
-	if [ "$UPSTART_EVENT" != "${UPSTART_EVENT##fedora.serial-console-available}" ]; then
-		initctl emit --no-wait fedora.serial-console-available $1 $2
+	if [ "$UPSTART_EVENTS" != "${UPSTART_EVENTS##fedora.serial-console-available}" ]; then
+		initctl emit --no-wait fedora.serial-console-available DEV=$DEV SPEED=$SPEED
 	fi
 end script
diff --git a/init/tty1.conf b/init/tty1.conf
deleted file mode 100644
index 7747d660..00000000
--- a/init/tty1.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-# tty1 - getty
-#
-# This service maintains a getty on tty1 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty1
diff --git a/init/tty2.conf b/init/tty2.conf
deleted file mode 100644
index ec5f94cd..00000000
--- a/init/tty2.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty2 - getty
-#
-# This service maintains a getty on tty2 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty2
diff --git a/init/tty3.conf b/init/tty3.conf
deleted file mode 100644
index ed95fdcf..00000000
--- a/init/tty3.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty3 - getty
-#
-# This service maintains a getty on tty3 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty3
diff --git a/init/tty4.conf b/init/tty4.conf
deleted file mode 100644
index 76b6d717..00000000
--- a/init/tty4.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty4 - getty
-#
-# This service maintains a getty on tty4 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty4
diff --git a/init/tty5.conf b/init/tty5.conf
deleted file mode 100644
index 9e9d8137..00000000
--- a/init/tty5.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty5 - getty
-#
-# This service maintains a getty on tty5 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty5
diff --git a/init/tty6.conf b/init/tty6.conf
deleted file mode 100644
index 7eb42c01..00000000
--- a/init/tty6.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# tty6 - getty
-#
-# This service maintains a getty on tty6 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc2
-start on stopped rc3
-start on stopped rc4
-start on started prefdm
-
-stop on runlevel 0
-stop on runlevel 1
-stop on runlevel 6
-
-respawn
-exec /sbin/mingetty tty6
diff --git a/sysconfig.txt b/sysconfig.txt
index 939798d6..582fb4d9 100644
--- a/sysconfig.txt
+++ b/sysconfig.txt
@@ -95,6 +95,9 @@ Generic options:
 
 /etc/sysconfig/init:
 
+  ACTIVE_CONSOLES=<devices>
+     A list of devices to start gettys on on boot. This supports
+     shell-style globs.
   BOOTUP=<some bootup mode>
      BOOTUP=graphical means use X Windows graphical boot up
      BOOTUP=color means colorized text mode boot display. 
diff --git a/sysconfig/init b/sysconfig/init
index 5ccec5e6..959c4d83 100644
--- a/sysconfig/init
+++ b/sysconfig/init
@@ -21,3 +21,5 @@ LOGLEVEL=3
 PROMPT=yes
 # Set to 'yes' to allow probing for devices with swap signatures
 AUTOSWAP=no
+# What ttys should gettys be started on?
+ACTIVE_CONSOLES=/dev/tty[1-6]
diff --git a/sysconfig/init.s390 b/sysconfig/init.s390
index 79955f07..121b38fc 100644
--- a/sysconfig/init.s390
+++ b/sysconfig/init.s390
@@ -19,3 +19,5 @@ SETCOLOR_NORMAL=
 LOGLEVEL=3
 # Set to anything other than 'no' to allow hotkey interactive startup...
 PROMPT=no
+# What ttys should gettys be started on?
+ACTIVE_CONSOLES=/dev/console