path: root/perl-install/standalone/drakroam

#!/usr/bin/perl

# drakroam: wireless network roaming GUI
# beta version uses wlandetect as backend
# Austin Acton, 2004
# <austin@mandrake.org>
# Licensed under the GPL

# problems
# - deletes comments in config file
# - expects an ifcfg file for static IP configurations (not uncommon)
# - roaming status fails (no idea why)
#   maybe same reason bash-completion killall can't see wlandetect?

# todo
# - make known and available lists have more rows by default (why so small?)
# - refresh status every x seconds
# - find a good way to drop the access point and resume roaming
# - make 'key' column wider by default

use Gtk2 '-init';
use Gtk2::SimpleList;
use Glib qw(TRUE FALSE);
use lib qw(/usr/lib/libDrakX);
use common;
require_root_capability();

# global settings
my $config = '/etc/wlandetect.conf';
my $route = '/sbin/route';
my $AboutFile = 'ABOUT';
my $HelpFile = 'README';
my $WLanDetect = '/usr/sbin/wlandetect';
my $IWList = '/sbin/iwlist';
my $IWConfig = '/sbin/iwconfig';
my $IFConfig = '/sbin/ifconfig';
my $IFUp = '/sbin/ifup';
my $IFDown = '/sbin/ifdown';
my $DHClient = '/sbin/dhclient';

# initialize variables
my $ScanInterval = 60; # tell deamon to search for new nets every x seconds

# initialize main window
$MainWindow = Gtk2::Window->new;
$MainWindow->set_title('Drakroam');
$MainWindow->set_border_width(2);
$MainWindow->signal_connect(delete_event => sub {
	Gtk2->main_quit;
});

# add main box; everything goes in here
$MainBox = Gtk2::VBox->new(0);
$MainWindow->add($MainBox);

# add status box and frame
$StatusBox = Gtk2::VBox->new(0);
$StatusFrame = Gtk2::Frame->new("Status");
$StatusFrame->set_border_width(2);
$StatusFrame->add($StatusBox);
$MainBox->pack_start($StatusFrame, 0, 0, 0);

# add status labels in three columns
$StatusLabels = Gtk2::HBox->new(0,0);
$StatusBox->pack_start($StatusLabels, 0, 0, 0);
$StatusColumnA = Gtk2::VBox->new(0);
$StatusColumnB = Gtk2::VBox->new(0);
$StatusColumnC = Gtk2::VBox->new(0);
$StatusLabels->pack_start($StatusColumnA, 0, 0, 10);
$StatusLabels->pack_start($StatusColumnB, 0, 0, 10);
$StatusLabels->pack_start($StatusColumnC, 0, 0, 10);
$StatusLabelA = Gtk2::Label->new;
$StatusLabelB = Gtk2::Label->new;
$StatusLabelC = Gtk2::Label->new;
$StatusColumnA->pack_start($StatusLabelA, 0, 0, 0);
$StatusColumnB->pack_start($StatusLabelB, 0, 0, 0);
$StatusColumnC->pack_start($StatusLabelC, 0, 0, 0);

# add disconnect and refresh buttons
$StatusControls = Gtk2::HBox->new(1,0);
$DisconnectButton = Gtk2::Button->new("Disconnect");
$StatusControls->pack_start($DisconnectButton, 0, 0, 0);
$DisconnectButton->signal_connect(clicked => sub { &Disconnect });
$RefreshButton = Gtk2::Button->new("Refresh");
$StatusControls->pack_start($RefreshButton, 0, 0, 0);
$RefreshButton->signal_connect(clicked => sub { &UpdateStatus });
$StatusBox->pack_start($StatusControls, 0, 0, 0);

# add roaming box and frame
$RoamBox = Gtk2::HBox->new(1,0);
$RoamFrame = Gtk2::Frame->new("Roaming");
$RoamFrame->set_border_width(2);
$RoamFrame->add($RoamBox);
$MainBox->pack_start($RoamFrame, 0, 0, 0);

# add roam status and controls
$RoamControls = Gtk2::VBox->new(0);
$RoamStatus = Gtk2::Label->new("Roaming: off");
$RoamControls->pack_start($RoamStatus, 0, 0, 0);
$RoamStartStop = Gtk2::HBox->new(0);
$StartButton = Gtk2::Button->new("Start");
$StartButton->signal_connect(clicked => sub { &StartRoam });
$RoamStartStop->pack_start($StartButton, 0, 0, 0);
$StopButton = Gtk2::Button->new("Stop");
$RoamStartStop->pack_start($StopButton, 0, 0, 0);
$StopButton->signal_connect(clicked => sub { &StopRoam });
$RoamControls->pack_start($RoamStartStop, 0, 0, 0);
$RoamBox->pack_start($RoamControls, 0, 0, 0);

# add scan controls
$ScanControl = Gtk2::VBox->new(0);
$ScanDialogue = Gtk2::HBox->new(0);
$ScanLabel = Gtk2::Label->new("Scan interval (sec): ");
$ScanControl->pack_start($ScanLabel, 0, 0, 0);
$ScanEntry = Gtk2::Entry->new;
$ScanEntry->set_width_chars(4);
$ScanDialogue->pack_start($ScanEntry, 0, 0, 0);
$ScanEntry->set_text($ScanInterval);
$ScanSetButton = Gtk2::Button->new("Set");
$ScanSetButton->signal_connect(clicked => sub { &SetInterval });
$ScanDialogue->pack_start($ScanSetButton, 0, 0, 0);
$ScanControl->pack_start($ScanDialogue, 0, 0, 0);
$RoamBox->pack_start($ScanControl, 0, 0, 0);

# add known network box
$KnownBox = Gtk2::VBox->new(0);
$KnownFrame = Gtk2::Frame->new("Known Networks (Drag up/down or edit)");
$KnownFrame->set_border_width(2);
$KnownFrame->add($KnownBox);
$MainBox->pack_start($KnownFrame, 0, 0, 0);

# make list and scroll box for known networks
$KnownList = Gtk2::SimpleList->new(
	"ESSID" => "text",
	"Mode" => "text",
	"Channel" => "int",
	"Key" => "text",
	"DHCP" => "bool"
);
$KnownList->get_selection->set_mode('single');
$KnownList->set_reorderable(1);
$KnownList->set_column_editable(1, TRUE); # allow to change mode
$KnownList->set_column_editable(2, TRUE); # allow to change channel
$KnownList->set_column_editable(3, TRUE); # allow to change key
#$KnownBox->pack_start($KnownList, 0, 0, 0);
$KnownScroll = Gtk2::ScrolledWindow->new;
$KnownScroll->set_policy('automatic', 'automatic');
$KnownScroll->add($KnownList);
$KnownBox->pack_start($KnownScroll, 0, 0, 0);

# add controls for known networks
$KnownControls = Gtk2::HBox->new(1);
$RemoveNetButton = Gtk2::Button->new("Remove");
$KnownControls->pack_start($RemoveNetButton, 0, 0, 0);
$RemoveNetButton->signal_connect(clicked => sub {
	my @selected = $KnownList->get_selected_indices;
	splice @{$KnownList->{data}}, "@selected", 1;
});
$ConnectButton = Gtk2::Button->new("Connect");
$KnownControls->pack_start($ConnectButton, 0, 0, 0);
$ConnectButton->signal_connect(clicked => sub {
	my @selected = $KnownList->get_selected_indices;
	&ConnectNow(@selected);
});
$SaveConfigButton = Gtk2::Button->new("Save");
$KnownControls->pack_start($SaveConfigButton, 0, 0, 0);
$SaveConfigButton->signal_connect(clicked => sub { &WriteConfig });
$KnownBox->pack_start($KnownControls, 0, 0, 0);

# add available networks box
$AvailableBox = Gtk2::VBox->new(0);
$AvailableFrame = Gtk2::Frame->new("Available Networks");
$AvailableFrame->set_border_width(2);
$AvailableFrame->add($AvailableBox);
$MainBox->pack_start($AvailableFrame, 0, 0, 0);

# make list and scroll box for available networks
$AvailableList = Gtk2::SimpleList->new(
	"ESSID" => "text",
	"Type" => "text",
	"Encryption" => "text",
	"Signal (%)" => "int"
);
$AvailableList->get_selection->set_mode('single');
#$AvailableBox->pack_start($AvailableList, 0, 0, 0);
$AvailableScroll = Gtk2::ScrolledWindow->new;
$AvailableScroll->set_policy('automatic', 'automatic');
$AvailableScroll->add($AvailableList);
$AvailableBox->pack_start($AvailableScroll, 0, 0, 0);

# add controls for available networks
$AvailableControls = Gtk2::HBox->new(1);
$AddNetButton = Gtk2::Button->new("Add");
$AvailableControls->pack_start($AddNetButton, 0, 0, 0);
$AddNetButton->signal_connect(clicked => sub { 
	my @selected = $KnownList->get_selected_indices;
	my $essid = $AvailableList->{data}[@selected][0];
	my $mode;
	my $channel;
	my $key;
	my $dhcp = 1; # assume dhcp for new networks
	&AddNet($essid, $mode, $channel, $key, $dhcp);
});
$UpdateAvailableButton = Gtk2::Button->new("Rescan");
$AvailableControls->pack_start($UpdateAvailableButton, 0, 0, 0);
$UpdateAvailableButton->signal_connect(clicked => sub { &UpdateAvailable });
$AvailableBox->pack_start($AvailableControls, 0, 0, 0);

# add master controls
$MasterBox = Gtk2::HBox->new(1);
$HelpButton = Gtk2::Button->new("Help");
$MasterBox->pack_start($HelpButton, 0, 0, 0);
$HelpButton->signal_connect(clicked => sub { &Dialog($HelpFile) });
$AboutButton = Gtk2::Button->new("About");
$MasterBox->pack_start($AboutButton, 0, 0, 0);
$AboutButton->signal_connect(clicked => sub { &Dialog($AboutFile) });
$CloseButton = Gtk2::Button->new("Save and close");
$MasterBox->pack_start($CloseButton, 0, 0, 0);
$CloseButton->signal_connect(clicked => sub {
	&WriteConfig;
	Gtk2->main_quit;
});
$MainBox->pack_start($MasterBox, 0, 0, 0);

# fill the GUI
&ReadConfig;
&UpdateAll;

sub UpdateAll {
	&UpdateAvailable; #must go first as it defines the device name
	&UpdateStatus;
	&UpdateRoaming;
}

sub UpdateRoaming {
	my $status = "off";
	open(my $PS, "ps -A |") or die("Can't open ps\n");
	any { /wlandetect$/ } <$PS> and $status = "on";
	close $PS;
	$RoamStatus->set_text("Roaming: $status");
}

sub UpdateStatus {
	my $CurrentNet = "-";
	my $CurrentIP = "---.---.---.---";
	$CurrentGW = "---.---.---.---";
	$CurrentMode = "";
	$CurrentWEP = "";
	$CurrentSignal = "-";
	print("Updating\n");
	open(my $IWSTATUS, "$IWConfig 2>/dev/null |") or die("Can't run iwconfig\n");
	while (<$IWSTATUS>) {
		if (/ESSID:"(\S*)"/) { $CurrentNet = $1 }
		if (/Mode:(\S*)\s/) { $CurrentMode = $1 }
		if (/key:(\S*)\s/) { $CurrentWEP = $1 }
		if (m!Quality:(\S*)/!) { $CurrentSignal = $1 }
	}
	close $IWSTATUS;
	open(my $IFSTATUS, "$IFConfig $device |") or die("Can't run ifconfig\n");
	while (<$IFSTATUS>) {
		if (/inet addr:(\S*)\s/) { $CurrentIP = $1 }
	}
	close $IFSTATUS;
	open(my $ROUTE, "$route |") or die("Can't run route\n");
	while (<$ROUTE>) {
		if (/default\s*(\S*)\s/) { $CurrentGW = $1 }
		else { $CurrentGW = "---.---.---.---" }
	}
	close $ROUTE;
	$StatusLabelA->set_text("Net: $CurrentNet\nMode: $CurrentMode");
	$StatusLabelB->set_text("IP: $CurrentIP\nEncryption: $CurrentWEP");
	$StatusLabelC->set_text("Gateway: $CurrentGW\nSignal: $CurrentSignal");
}

sub UpdateAvailable {
	print("Running iwlist\n");
	open(my $LIST, "$IWList scan 2>/dev/null |") or die("Can't run iwlist");
	@{$AvailableList->{data}} = ();
	while (<$LIST>) {
		if(/([^ ]+)([ \t]+)Scan completed :/) { $device = $1 }
		elsif (/([^ ]+)([ \t]+)No scan results/) { $device = $1 }
		if (/ESSID:"(\S*)"/) {
			$essid = $1;
			print("Found $essid.\n");
			my $mode;
			my $wep;
			my $signal;
		}
		if (/Mode:(\S*)/) { $mode = $1 }
		if (m!Quality:(\S*)/!) { $signal = $1 }
		if (/key:(\S*)\s/) {
			$wep = $1;
			print("Mode: $mode, WEP: $wep, Signal: $signal\n");
			push @{$AvailableList->{data}}, [$essid, $mode, $wep, $signal];
		}
	}
	close $LIST;
}

sub AddNet {
	my $essid = shift @_;
	my $mode = shift @_;
	my $channel = shift @_;
	my $key = shift @_;
	my $dhcp = shift @_;
	print "Adding net $essid\n";
	push @{$KnownList->{data}}, [ $essid, $mode, $channel, $key, $dhcp ];
}

sub ReadConfig {
	open(my $CONFIG, $config) or die "Configuration file not found.\n";
	print "Reading config file.\n\n";
	$line = 0;
	while (<$CONFIG>) {
		$line++;
                if (/^#/) {} #ignore comments
		elsif (/^\n/) {} #ignore blank lines
		elsif (/([^ \t]+)([ \t]+)(.*)/) {
                	my $essid = $1;
			my $command = $3;
			# setup new network entry
			my $mode;
			my $channel;
			my $key;
			my $dhcp;
			if ($command =~ /mode\s(\S*);/) { $mode = $1 }
			elsif ($command =~ /mode\s(\S*)\s/) { $mode = $1 }
			if ($command =~ /channel\s(\S*);/) { $channel = $1 }
			elsif ($command =~ /channel\s(\S*)\s/) { $channel = $1 }
			if ($command =~ /key\s(\S*);/) { $key = $1 }
			elsif ($command =~ /key\s(\S*)\s/) { $key = $1 }
			if ($command =~ /dhclient/) { $dhcp = 1 }
			else { $dhcp = 0 }
			&AddNet($essid, $mode, $channel, $key, $dhcp);
		}
		else { die "Line $line of configuration file is not parseable.\n" }
	}
	close $CONFIG;
}

sub WriteConfig {
	open(my $CONFIG, "> $config") or die("Can't open configuration file\n");
	print $CONFIG "#wlandetect configuration file\n#format: essid<tab><tab>commands\n#use @DEV@ for device name\n";
	foreach my $row (@{$KnownList->{data}}) { # again, lame
		print $CONFIG "$row->[0]\t\t$IWConfig essid $row->[0]";
		if ($row->[1]) {
			print $CONFIG "mode $row->[1] ";
		}
		if ($row->[2]) {
			print $CONFIG "channel $row->[2] ";
		}
		if ($row->[3]) {
			print $CONFIG "key $row->[3] ";
		}
		print $CONFIG "; ";
		if ($row->[4]) {
			print $CONFIG "$IFConfig \@DEV\@ up; $DHClient \@DEV\@";
		}
		else {
			print $CONFIG "$IFUp \@DEV\@"
		}
		print $CONFIG "\n";
	}
	close $CONFIG;
}

sub StartRoam {
	system("killall wlandetect; $WLanDetect -d -t $ScanInterval &");
	&UpdateRoaming
}

sub StopRoam {
	system("killall wlandetect");
	&UpdateRoaming;
}

sub SetInterval {
	$ScanInterval = $ScanEntry->get_text;
	system("killall wlandetect; $WLanDetect -d -t $ScanInterval &");
}

sub ConnectNow {
	my @command = "";
	push @command, "$IWConfig essid $KnownList->{data}[$row][0] ";
	if ($KnownList->{data}[$row][1]) {
		push @command, "mode $KnownList->{data}[$row][1] ";
	}
	if ($KnownList->{data}[$row][2]) {
		push @command, "channel $KnownList->{data}[$row][2] ";
	}
	if ($KnownList->{data}[$row][3]) {
		push @command, "key $KnownList->{data}[$row][3] ";
	}
	push @command, "; ";
	if ($KnownList->{data}[$row][4]) {
		push @command, "$IFConfig $decive up; $DHClient $device";
	}
	else {
		push @command, "$IFUp $device"
	}
	$ToBash = join("", @command);
	print("Sending $ToBash\n");
	system($ToBash);
	&UpdateStatus;
}

sub Disconnect {
	system("$IFDown $device");
	&UpdateStatus;
}

sub Dialog {
# read file
$FilePointer = pop @_;
my $content = join('', cat_($FilePointer));
# dump into a dialog
$AboutWindow = Gtk2::Dialog->new("Drakroam Info", $MainWindow,
                                    'destroy-with-parent',
                                    'gtk-ok' => 'none');
$AboutLabel = Gtk2::Label->new($content);
$DialogScroll = Gtk2::ScrolledWindow->new;
#$DialogScroll->set_policy('automatic', 'automatic');
$DialogScroll->add_with_viewport($AboutLabel);
$AboutWindow->vbox->add($DialogScroll);
$AboutWindow->signal_connect(response => sub { $_[0]->destroy });
$AboutWindow->show_all;
}

# start GUI
print "Stating GUI\n";
$MainWindow->show_all;
Gtk2->main;