mt - en to mt translation catalogue (3240 entries)

en: Which USB key do you want to format?
mt: Liema USB-key trid tifformattja?

en: You are about to format a USB device "%s". This will delete all data on it.
    Make sure that the selected device is the USB key you want to format. 
    We advise you to unplug all other USB storage devices while doing this operation.
mt: Int se tifformattja l-apparat USB "%s". Dan iħassar id-data kollha minn fuqha.
    Aċċerta li dan l-apparat huwa l-USB key li trid tifformattja.
    Tista' tagħmel dan billi taqla' l-apparat kollu "USB storage" qabel tkompli.

en: Key is not writable
mt: USB key ma tistax tinkiteb

en: The USB key seems to have write protection enabled. Please
    unplug it, remove write protection, and then plug it again.
mt: Il-USB key jidher li hija protetta mill-ktib. Jekk jogħġbok 
    aqlagħha, neħħi l-protezzjoni kontra l-ktib, u erġa' waħħalha.

en: Retry
mt: Erġa' Pprova

en: Continue without USB key
mt: Kompli mingħajr USB key

en: The USB key seems to have write protection enabled, but we can not safely
    unplug it now.
    
    
    Click the button to reboot the machine, unplug it, remove write protection,
    plug the key again, and launch Mandrake Move again.
mt: Il-USB key jidher li hija protetta mill-ktib, imma ma nistgħux naqilgħuha
    bħalissa.
    
    
    Klikkja l-buttuna biex tirributja l-magna, aqla' l-USB key, neħħi
    l-protezzjoni kontra l-ktib, erġa' waħħalha, u erġa' tella' Mandrake Move.

en: Reboot
mt: Irributja

en: Your USB key does not have any valid Windows (FAT) partitions.
    We need one to continue (beside, it's more standard so that you
    will be able to move and access your files from machines
    running Windows). Please plug in an USB key containing a
    Windows partition instead.
    
    
    You may also proceed without an USB key - you'll still be
    able to use Mandrake Move as a normal live Mandrake
    Operating System.
mt: Il-USB key m'għandhiex partizzjonijiet validi tal-Windows (FAT).
    Għandek bżonn waħda biex tkompli (apparti minn hekk, hija iżjed 
    standard għalhekk tkun tista' tmexxi u taċċessa l-fajls minn 
    kompjuters bil-Windows). Jekk jogħġbok waħħal USB key li fih 
    partizzjoni tal-Windows.
    
    
    Tista' wkoll tkompli mingħajr USB key - xorta tkun tista' tuża
    Mandrake Move bħala sistema operattiva normali "live" Mandrake.

en: We did not detect any USB key on your system. If you
    plug in an USB key now, Mandrake Move will have the ability
    to transparently save the data in your home directory and
    system wide configuration, for next boot on this computer
    or another one. Note: if you plug in a key now, wait several
    seconds before detecting again.
    
    
    You may also proceed without an USB key - you'll still be
    able to use Mandrake Move as a normal live Mandrake
    Operating System.
mt: Ma sibniex USB key fuq is-sistema. Jekk twaħħal USB key issa,
    Mandrake Move ikun jista' jikteb id-data fid-direttorju personali
    tiegħek u tal-konfigurazzjoni tas-sistema, għal meta terġa' tibbutja
    dan il-kompjuter jew kompjuter ieħor. Nota: Jekk twaħħal USB key 
    issa, stenna ftit sekondi qabel terġa' tipprova ssibha.
    
    
    Tista' wkoll tkompli mingħajr USB key - xorta tkun tista' tuża
    Mandrake Move bħala sistema operattiva normali "live" Mandrake.

en: Need a key to save your data
mt: Hemm bżonn USB key biex tinkiteb id-data

en: Detect USB key again
mt: Erġa' fittex USB key

en: Setting up USB key
mt: Qed tiġi ssettjata USB key

en: Please wait, setting up system configuration files on USB key...
mt: Stenna ftit, qed jiġu ssettjati fajls ta' konfigurazzjoni fuq USB key...

en: Enter your user information, password will be used for screensaver
mt: Daħħal l-informazzjoni tal-utent, il-password tintuża għall-iscreensaver

en: Auto configuration
mt: Awto konfigurazzjoni

en: Please wait, detecting and configuring devices...
mt: Stenna ftit, qed jinstab u jiġi ssettjat it-tagħmir...

en: Error
mt: Problema

en: An error occurred, but I do not know how to handle it nicely.
    Continue at your own risk.
mt: Inqalgħet problema, imma ma nafx kif nieħu ħsieba sew.
    Tista' tkompli b'riskju tiegħek

en: An error occurred
mt: Inqalgħet problema

en: An error occurred:
    
    
    %s
    
    This may come from corrupted system configuration files
    on the USB key, in this case removing them and then
    rebooting Mandrake Move would fix the problem. To do
    so, click on the corresponding button.
    
    
    You may also want to reboot and remove the USB key, or
    examine its contents under another OS, or even have
    a look at log files in console #3 and #4 to try to
    guess what's happening.
mt: Kien hemm problema:
    
    
    %s
    
    Dan jista' jkun minn fajls ta' konfigurazzjoni korrotti
    fuq il-USB key. F'dak il-każ jekk tneħħihom u tirributja
    Mandrake Move għandha tiġi riżolta l-problema. Biex tagħmel
    dan, klikkja fuq il-buttuna rispettiva.
    
    
    Tista' wkoll tirributja u tneħħi l-USB key, jew teżamina 
    l-kontenut taħt sistema operattiva oħra, jew anke tħares lejn
    il-logs fuq konsol #3 u #4 biex tipprova tinduna x'qed jiġri.

en: Remove system config files
mt: Neħħi l-fajls ta' konfigurazzjoni tas-sistema

en: Simply reboot
mt: Irributja biss

en: You can only run with no CDROM support
mt: Tista tħaddem biss mingħajr sapport għal CDROM

en: Kill those programs
mt: Oqtol dawk il-programmi

en: No CDROM support
mt: Ebda sapport CD-ROM

en: Read carefully!
mt: Aqra sew!

en: You can not use another CDROM when the following programs are running: 
    %s
mt: Ma tistax tuża CDROM ieħor waqt li qed jaħdmu dawn il-programmi:
    %s

en: Copying to memory to allow removing the CDROM
mt: Qed nikkopja għall-memorja sabiex ikun jista' jitneħħa s-CDROM

en: 64 MB or more
mt: 64 MB jew iżjed

en: Choose an X server
mt: Agħżel server X

en: Multi-head configuration
mt: Konfigurazzjoni multi-head

en: Your system supports multiple head configuration.
    What do you want to do?
mt: Is-sistema tiegħek tissapporti konfigurazzjoni "multi-head".
    Xi trid tagħmel?

en: Can not install Xorg package: %s
mt: Ma nistax ninstalla l-pakkett Xorg: %s

en: Select the memory size of your graphics card
mt: Agħżel id-daqs tal-memorja tal-kard tal-grafika

en: Xorg configuration
mt: Konfigurazzjoni Xorg

en: Which configuration of Xorg do you want to have?
mt: Liema konfigurazzjoni ta' Xorg trid li jkollok?

en: Configure all heads independently
mt: Ikkonfigura l-heads kollha independentement

en: Use Xinerama extension
mt: Uża estensjoni Xinerama

en: Configure only card "%s"%s
mt: Ikkonfigura l-kard "%s"%s biss

en: Xorg %s with 3D hardware acceleration
mt: Xorg %s b'aċċelerazzjoni 3D

en: Your card can have 3D hardware acceleration support with Xorg %s.
mt: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' Xorg %s.

en: Xorg %s with EXPERIMENTAL 3D hardware acceleration
mt: Xorg %s b'aċċelerazzjoni 3D ESPERIMENTALI

en: Your card can have 3D hardware acceleration support with Xorg %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
mt: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' Xorg %s.
    DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER.

en: Custom
mt: Personalizzat

en: Quit
mt: Noħroġ

en: Graphic Card
mt: Kard grafika

en: Monitor
mt: Skrin

en: Resolution
mt: Reżoluzzjoni

en: Test
mt: Ittestja

en: Options
mt: Għażliet

en: Your Xorg configuration file is broken, we will ignore it.
mt: Il-konfigurazzjoni Xorg hija ħażina - se ninjorawha.

en: Keep the changes?
    The current configuration is:
    
    %s
mt: Trid iżżomm il-bidliet?
    Il-konfigurazzjoni kurrenti hija:
    
    %s

en: Choose a monitor for head #%d
mt: Agħżel skrin għal "head" #%d

en: Choose a monitor
mt: Agħżel skrin

en: Generic
mt: Ġeneriku

en: Vendor
mt: Manifattur

en: Plug'n Play probing failed. Please select the correct monitor
mt: Analiżi Plug'n'play falliet. Jekk jogħġbok agħżel monitur speċifiku

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
mt: Iż-żewġ parametri kritiċi huma frekwenza vertikali (vertical refresh rate), li
    hija r-rata li biha l-iskrin sħiħ jiġi aġġornat, u iżjed importanti il-frekwenza
    orizzontali (horizontal refresh rate), li hija r-rata li biha jiġu aġġornati l-linji.
    
    Huwa importanti ħafna li ma tispeċifikax skrin b'rata iżjed mgħaġġla milli
    kapaċi juri l-iskrin tiegħek, għax tista' tagħmillu l-ħsara.
    Jekk għandek xi dubju, agħżel valur żgħir.

en: Horizontal refresh rate
mt: Frekwenza orizzontali

en: Vertical refresh rate
mt: Frekwenza vertikali

en: 256 colors (8 bits)
mt: 256 kuluri (8 bit)

en: 32 thousand colors (15 bits)
mt: 32 elf kulur (15 bit)

en: 65 thousand colors (16 bits)
mt: 65 elf kulur (16 bit)

en: 16 million colors (24 bits)
mt: 16 miljun kulur (24 bit)

en: Resolutions
mt: Reżoluzzjonijiet

en: Choose the resolution and the color depth
mt: Agħżel reżoluzzjoni u finezza ta' kuluri

en: Graphics card: %s
mt: Kard grafika: %s

en: Cancel
mt: Ikkanċella

en: Help
mt: Għajnuna

en: Test of the configuration
mt: Test tal-konfigurazzjoni

en: Do you want to test the configuration?
mt: Trid tittestja din il-konfigurazzjoni?

en: Warning: testing this graphic card may freeze your computer
mt: Twissija: it-test ta' din il-kard grafika jista' jwaħħal il-kompjuter

en: An error occurred:
    %s
    Try to change some parameters
mt: Inqalgħet problema:
    %s
    Ipprova ibdel xi parametri

en: Leaving in %d seconds
mt: Ħiereġ f' %d sekondi

en: Is this the correct setting?
mt: Dan huwa s-seting tajjeb?

en: Keyboard layout: %s
mt: Tqassim tat-tastiera: %s

en: Mouse type: %s
mt: Tip ta' maws: %s

en: Mouse device: %s
mt: Apparat maws: %s

en: Monitor: %s
mt: Skrin: %s

en: Monitor HorizSync: %s
mt: Frek.Orizzontali Skrin: %s

en: Monitor VertRefresh: %s
mt: Frek. Vertikali Skrin: %s

en: Graphics card: %s
mt: Kard grafika: %s

en: Graphics memory: %s kB
mt: Memorja grafika: %s kB

en: Color depth: %s
mt: Numru ta' kuluri: %s

en: Resolution: %s
mt: Reżoluzzjoni: %s

en: Xorg driver: %s
mt: Drajver Xorg: %s

en: Graphical interface at startup
mt: X fil-bidu

en: I can setup your computer to automatically start the graphical interface (Xorg) upon booting.
    Would you like Xorg to start when you reboot?
mt: Nista' nissettja l-kompjuter biex awtomatikament jidħol f' X malli jitla'.
    Trid ittella' X Windows meta tixgħel?

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
mt: Il-kard ta' grafika tiegħek donnha għandha konnessjoni TV-OUT.
    Tista' tiġi kkonfigurata biex taħdem bil-framebuffer.
    
    Biex tagħmel dan trid tqabbad il-kard grafika mat-televiżjoni qabel tixgħel il-kompjuter.
    Imbagħad agħżel "TVout" fil-bootloader.
    
    Għandek din il-faċilità?

en: What norm is your TV using?
mt: Liema standard juża t-TV tiegħek?

en: Please wait
mt: Stenna ftit

en: Bootloader installation in progress
mt: Għaddejja l-installazzjoni tal-bootloader

en: LILO wants to assign a new Volume ID to drive %s.  However, changing
    the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.
    This caution does not apply to Windows 95 or 98, or to NT data disks.
    
    Assign a new Volume ID?
mt: LILO jixtieq jassenja ID tal-Volum ġdid għad-drajv %s. Però, li tibdel
    l-ID tal-Volum ta' diska "boot" ta' Windows NT, 2000 jew XP hija problema
    kritika għall-Windows.
    Din it-twissija ma tapplikax għal Windows 95 jew 98, jew għal diski tad-data tal-NT.
    
    Trid tagħti ID tal-Volum ġdid?

en: Installation of bootloader failed. The following error occurred:
mt: L-installazzjoni tal-bootloader falla. Dan kien il-messaġġ:

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you do not see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
mt: Għandek mnejn trid tbiddel is-setings tal-Open Firmware u tbiddel l-
    apparat tal-boot biex jiffunzjona l-bootloader.  Jekk ma tixtieqx tara
    l-prompt tal-bootloader meta tirristartja, żomm Command-Option-O-F 
    waqt ir-ristartjar u daħħal:
     setenv boot-device %s,\\:tbxi
     Imbagħad ittajpja: shut-down
    Meta jerġa' jitla' għandek tara l-prompt tal-bootloader.

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
mt: Int għażilt li tinstalla l-bootloader fuq partizzjoni. 
    Dan jimplika li diġà għandek bootloader fuq il-ħard disk mnejn tistartja (eż: System Commander).
    
    Minn fuq liema drajv tistartja?

en: First sector of drive (MBR)
mt: L-ewwel settur tal-ħard disk (MBR)

en: First sector of the root partition
mt: L-ewwel settur tal-partizzjoni root

en: On Floppy
mt: Fuq Flopi

en: Skip
mt: Aqbeż

en: LILO/grub Installation
mt: Installazzjoni LILO/grub

en: Where do you want to install the bootloader?
mt: Fejn tixtieq tinstalla l-"bootloader"?

en: Boot Style Configuration
mt: Konfigurazzjoni ta' l-istil ta' boot

en: Bootloader main options
mt: Għażliet prinċipali tal-bootloader

en: Give the ram size in MB
mt: Agħti d-daqs tar-RAM f'MB

en: Option ``Restrict command line options'' is of no use without a password
mt: L-għażla "irrestrinġi l-għażliet tal-linja tal-kmand" m'għandha ebda effett minngħajr password

en: The passwords do not match
mt: Il-passwords ma jaqblux

en: Please try again
mt: Erġa' pprova

en: Bootloader to use
mt: Liema bootloader tuża

en: Boot device
mt: Diska/apparat "boot"

en: Delay before booting default image
mt: Stennija qabel ittella' l-għażla impliċita

en: Enable ACPI
mt: Ippermetti ACPI

en: Force no APIC
mt: Tippermettix APIC

en: Force No Local APIC
mt: Tippermettix APIC Lokali

en: Password (again)
mt: Password (erġa')

en: Restrict command line options
mt: Irrestrinġi l-għażliet tal-linja tal-kmand

en: Clean /tmp at each boot
mt: Naddaf /tmp kull meta tixgħel

en: Precise RAM size if needed (found %d MB)
mt: Daqs eżatt ta' memorja jekk meħtieġ (sibt %d RAM)

en: Init Message
mt: Messaġġ tal-bidu

en: Open Firmware Delay
mt: Stennija Open Firmware

en: Kernel Boot Timeout
mt: Skadenza tal-ħin għall-kernel boot

en: Enable CD Boot?
mt: Ippermetti boot mis-CD?

en: Enable OF Boot?
mt: Ippermetti Boot OF?

en: Default OS?
mt: OS Impliċitu?

en: Append
mt: Żid fl-aħħar

en: Video mode
mt: Konfigurazzjoni video

en: Network profile
mt: Profil tan-network

en: Label
mt: Isem

en: Default
mt: Impliċitu

en: Initrd-size
mt: Daqs ta' initrd

en: NoVideo
mt: EbdaVideo

en: Empty label not allowed
mt: Isem vojt mhux aċċettat

en: You must specify a kernel image
mt: Trid tispeċifika "image" tal-kernel

en: You must specify a root partition
mt: Trid tispeċifika partizzjoni "root"

en: This label is already used
mt: Dan l-isem diġà qed jintuża

en: Which type of entry do you want to add?
mt: Liema tip ta' sistema operattiva trid iżżid?

en: Other OS (SunOS...)
mt: OS ieħor (SunOS...)

en: Other OS (MacOS...)
mt: OS ieħor (MacOS...)

en: Other OS (Windows...)
mt: OS ieħor (Windows...)

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
mt: Hawn huma l-elementi differenti>
    Tista' żżid iżjed jew tibdel dawk li hemm.

en: access to X programs
mt: aċċess għall-programmi X

en: access to rpm tools
mt: aċċess għall-għodda rpm

en: allow "su"
mt: ippermetti "su"

en: access to administrative files
mt: aċċess għall-fajls amministrattivi

en: access to network tools
mt: aċċess għall-għodda tan-network

en: access to compilation tools
mt: aċċess għall-għodda tal-kompilazzjoni

en: (already added %s)
mt: (%s diġà miżjud)

en: This password is too simple
mt: Dan il-password sempliċi wisq

en: Please give a user name
mt: Jekk jogħġbok agħti isem ta' user

en: The user name must contain only lower cased letters, numbers, `-' and `_'
mt: L-isem tal-user jista' jkun fih biss ittri żgħar, numri, "-" u "_".

en: The user name is too long
mt: Dan l-isem ta' user huwa twil wisq

en: This user name has already been added
mt: Dan l-isem ta' user diġà jeżisti

en: Add user
mt: Żid user

en: Enter a user
    %s
mt: Daħħal dettalji ta' user
    %s

en: Done
mt: Lest

en: Accept user
mt: Aċċetta user

en: Real name
mt: Isem veru

en: Login name
mt: Isem tal-login

en: Icon
mt: Stampa

en: Autologin
mt: Awto-login

en: I can set up your computer to automatically log on one user.
mt: Nista' nissettja l-kompjuter biex awtomatikament jagħmel login fuq user wieħed.

en: Do you want to use this feature?
mt: Trid tuża din il-faċilità?

en: Choose the default user:
mt: Agħżel il-user impliċitu:

en: Choose the window manager to run:
mt: Agħżel liema "window manager" trid tħaddem:

en: Please choose a language to use.
mt: Agħżel liema lingwa trid tuża.

en: Language choice
mt: Għażla ta' lingwa

en: Mandrakelinux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
mt: Tista' tagħżel lingwi oħra li jkun u disponibbli wara li tinstalla

en: Use Unicode by default
mt: Uża Unicode impliċitament

en: All languages
mt: Lingwi kollha

en: Country / Region
mt: Pajjiż

en: Please choose your country.
mt: Jekk jogħġbok agħżel il-pajjiż.

en: Here is the full list of available countries
mt: Hawn issib lista sħiħa ta' pajjiżi disponibbli

en: Other Countries
mt: Pajjiżi oħrajn

en: Input method:
mt: Metodu ta' input:

en: None
mt: Ebda

en: No sharing
mt: Ebda offerti (sharing)

en: Allow all users
mt: Ippermetti l-users kollha

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
mt: Trid tippermetti lill-users li joffru xi direttorji fid-direttorju personali tagħhom għal fuq in-network?
    Jekk tippermetti dan, il-users ikunu jistgħu jagħżlu "Offri" jew "Share" ġo konqueror jew nautilus.
    
    "Personalizzat" jippermetti setings għal kull user.

en: NFS: the traditional Unix file sharing system, with less support on Mac and Windows.
mt: NFS: sistema ta' qsim ta' fajls tradizzjonali Unix, b'inqas sapport fuq Mac u Windows.

en: SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems.
mt: SMB: sistema ta' qsim ta' fajls użata minn Windows, Mac OSX u diversi sistemi moderni ta' Linux.

en: You can export using NFS or SMB. Please select which you would like to use.
mt: Tista' toffri direttorji bl-NFS jew SMB. Liema trid?

en: Launch userdrake
mt: Ħaddem userdrake

en: Close
mt: Agħlaq

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
mt: Id-direttorju offruti (file sharing) għall-users juża l-
    grupp "fileshare". Tista' tuża userdrake biex iżżid
    users ma' dan il-grupp.

en: Local file
mt: Fajl lokali

en: Windows Domain
mt: Dominju tal-Windows

en: Active Directory with SFU
mt: Active Directory b' SFU

en: Active Directory with Winbind
mt: Active Directory b' Winbind

en: Local file:
mt: Fajl lokali:

en: Use local for all authentication and information user tell in local file
mt: Uża lokali biex iżżomm l-awtentikazzjoni kollha u l-informazzjoni dwar l-utenti ġo fajl lokali

en: Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization.
mt: Jgħid lill-kompjuter juża LDAP għall-awtentikazzjoni kollha jew kważi kollha. LDAP jgħaqqad ċerti tipi ta' informazzjoni fl-għaqda jew ditta.

en: Allows you to run a group of computers in the same Network Information Service domain with a common password and group file.
mt: Jippermettilek tħaddem grupp ta' kompjuters fl-istess dominju NIS b'fajls tal-password u gruppi komuni.

en: Windows Domain:
mt: Dominju tal-Windows:

en: Winbind allows the system to retrieve information and authenticate users in a Windows domain.
mt: Winbind iħalli s-sistema tikseb informazzjoni u tawtentika users f'dominju tal-Windows.

en: Active Directory with SFU:
mt: Active Directory b' SFU:

en: Kerberos is a secure system for providing network authentication services.
mt: Kerberos hija sistema sikura biex tipprovdi servizzi ta' awtentikazzjoni fuq network.

en: Active Directory with Winbind:
mt: Active Directory b' Winbind:

en: Authentication LDAP
mt: Awtentikazzjoni LDAP

en: LDAP Base dn
mt: DN bażi LDAP

en: LDAP Server
mt: Server LDAP

en: simple
mt: sempliċi

en: security layout (SASL/Kerberos)
mt: tqassim tas-sigurtà (SASL/Kerberos)

en: Authentication Active Directory
mt: Awtentikazzjoni Active Directory

en: Domain
mt: Dominju

en: LDAP users database
mt: Databażi ta' utenti LDAP

en: Use Anonymous BIND
mt: Uża BIND anonimu

en: LDAP user allowed to browse the Active Directory
mt: Utent LDAP jitħalla jibbrawżja l-Active Directory

en: Password for user
mt: Password għall-utent

en: Encryption
mt: Ċifrazzjoni

en: Authentication NIS
mt: Awtentikazzjoni NIS

en: NIS Domain
mt: Dominju NIS

en: NIS Server
mt: Server NIS

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
mt: Biex dan jaħdem għal PDC tal-W2K, aktarx ikollok bżonn lill-amministratur iħaddem: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add u jirristartja s-server.
    Ikollok bżonn ukoll isem l-utent u password ta' Amministratur tad-Dominju biex tingħaqad mad-dominju Windows(TM).
    Jekk in-network għadu ma ġiex imtella', Drakx jipprova jingħaqad mad-dominju wara l-issettjar tan-network.
    Jekk dan il-pass ifalli għal xi raġuni u l-awtentikazzjoni tad-dominju m'hux jaħdem, ħaddem "smbpasswd -j DOMINJU -U UTENT%%PASSWORD' u uża d-dominju, utent u password tal-amministratur tad-dominju tal-Windows(TM), wara li titla' l-magna.
    Il-kmand "wbinfo -t" jittestja jekk is-sigrieti ta' awtentikazzjoni humiex tajbin.

en: Authentication Windows Domain
mt: Awtentikazzjoni Dominju Windows

en: Domain Admin User Name
mt: User ta' amministrazzjoni tad-dominju

en: Domain Admin Password
mt: Password ta' amministrazzjoni tad-dominju

en: Use Idmap for store UID/SID
mt: Uża Idmap biex issorr UID/SID

en: Default Idmap
mt: Idmap impliċitu

en: Authentication method
mt: Metodu ta' awtentikazzjoni

note: -PO: keep this short or else the buttons will not fit in the window
en: No password
mt: Ebda password

en: This password is too short (it must be at least %d characters long)
mt: Dan il-password qasir wisq (irid ikun twil tal-inqas %d ittri)

en: Authentication
mt: Awtentikazzjoni

en: Can not use broadcast with no NIS domain
mt: Ma nistax nuża "broadcast" minngħajr dominju NIS

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
en: Welcome to the operating system chooser!
    
    Choose an operating system from the list above or
    wait for default boot.
mt: Merhba ghall-ghazla ta' sistema operattiva
    
    Aghzel sistema operattiva mil-lista ta' fuq, jew
    stenna ghall-ghazla implicita

en: LILO with graphical menu
mt: LILO b'menu grafiku

en: LILO with text menu
mt: LILO b'menu testwali

en: not enough room in /boot
mt: M'hemmx biżżejjed spazju fuq /boot

en: You can not install the bootloader on a %s partition
mt: Ma tistax tinstalla l-bootloader fil-partizzjoni %s

en: Your bootloader configuration must be updated because partition has been renumbered
mt: Il-konfigurazzjoni tal-bootloader trid tiġi aġġornata għax il-partizzjoni inbidlilha n-numru

en: The bootloader can not be installed correctly. You have to boot rescue and choose "%s"
mt: Il-bootloader ma jistax jiġi nstallat sew. Trid tibbutja "rescue" u tagħżel "%s"

en: Re-install Boot Loader
mt: Erġa' Installa bootloader

en: %d minutes
mt: %d minuti

en: 1 minute
mt: minuta

en: %d seconds
mt: %d sekondi

en: kdesu missing
mt: kdesu nieqes

en: consolehelper missing
mt: consolehelper nieqes

en: Austria
mt: Awstrija

en: Belgium
mt: Belġju

en: Switzerland
mt: Svizzera

en: Costa Rica
mt: Kosta Rika

en: Czech Republic
mt: Repubblika Ċeka

en: Germany
mt: Ġermanja

en: France
mt: Franza

en: Greece
mt: Greċja

en: Hungary
mt: Ungerija

en: Italy
mt: Italja

en: Norway
mt: Norveġja

en: Poland
mt: Polonja

en: Sweden
mt: Svezja

en: Slovakia
mt: Slovakkja

en: Taiwan
mt: Tajwan

en: United States
mt: Stati Uniti

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
mt: WebDAV huwa protokoll li jħallik timmonta d-direttorju ta' webserver
    lokalment u tittrattah bħala filesystem lokali (dejjem jekk il-webserver
    huwa ssettjat bħala server WebDAV). Jekk tixtieq iżżid punti ta' mmuntar
    WebDAV, agħżel "Ġdid".

en: New
mt: Ġdid

en: Unmount
mt: Żmonta

en: Mount
mt: Immonta

en: Mount point
mt: Post għall-immontar

en: Please enter the WebDAV server URL
mt: Jekk jogħġbok daħħal il-URL tas-server WebDAV

en: The URL must begin with http:// or https://
mt: Il-URL irid jibda' b' http:// jew https://

en: Mount point:
mt: Punt ta' mmuntar:

en: Options: %s
mt: Għażliet: %s

en: Please make a backup of your data first
mt: Ħu kopja tad-data kollha qabel tkompli

en: If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)
    at the beginning of the disk
mt: Jekk bi ħsiebek tuża aboot, kun ċert li tħalli spazju fil-bidu tad-diska (2048 setturi biżżejjed)

en: Wizard
mt: Saħħar

en: Choose action
mt: Agħżel azzjoni

en: You have one big Microsoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
mt: Għandek partizzjoni waħda kbira Microsoft Windows.
    Nissuġġerixxi li l-ewwel iċċekken dik il-partizzjoni
    (klikkja fuqha, u agħfas "ibdel daqs")

en: Please click on a partition
mt: Jekk jogħġbok klikkja fuq partizzjoni

en: Details
mt: Dettalji

en: No hard drives found
mt: Ebda ħard disk ma nstab!

en: Other
mt: Oħrajn

en: Empty
mt: Vojt

en: Filesystem types:
mt: Tipi ta' filesystem

en: Use ``%s'' instead
mt: Uża "%s" minnflok

en: Create
mt: Oħloq

en: Type
mt: Tip

note: -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Delete
mt: Ħassar

en: Use ``Unmount'' first
mt: L-ewwel agħfas "żmonta"

en: Choose another partition
mt: Agħżel partizzjoni oħra

en: Choose a partition
mt: Agħżel partizzjoni

en: Exit
mt: Oħroġ

en: Undo
mt: Annulla

en: Toggle to normal mode
mt: Lura f'modalità normali

en: Toggle to expert mode
mt: Idħol f'modalità għal esperti

en: Continue anyway?
mt: Trid tkompli xorta?

en: Quit without saving
mt: Oħroġ minngħajr ma tikteb

en: Quit without writing the partition table?
mt: Trid toħroġ minngħajr ma tikteb it-tabella tal-partizzjonijiet?

en: Do you want to save /etc/fstab modifications
mt: Trid tikteb il-modifiki għal /etc/fstab

en: You need to reboot for the partition table modifications to take place
mt: Trid tirristartja sabiex il-bidliet fit-tabella tal-partizzjonijiet ikollhom effett.

en: Clear all
mt: Neħħi kollox

en: Auto allocate
mt: Awto-allokazzjoni

en: More
mt: Iżjed

en: Hard drive information
mt: Informazzjoni dwar il-ħard disk

en: All primary partitions are used
mt: Il-partizzjonijiet primarji kollha mimlijin

en: I can not add any more partitions
mt: Ma nistax inżid iżjed partizzjonijiet

en: To have more partitions, please delete one to be able to create an extended partition
mt: Biex iżżid iżjed partizzjonijiet, trid tħassar waħda milli hemm biex tkun tista' toħloq partizzjoni estiża

en: Save partition table
mt: Ikteb it-tabella ta' partizzjonijiet

en: Restore partition table
mt: Erġa' tella' tabella ta' partizzjonijiet

en: Rescue partition table
mt: Salva tabella ta' partizzjonijiet

en: Reload partition table
mt: Erġa' aqra t-tabella ta' partizzjonijiet

en: Removable media automounting
mt: Awtomuntar ta' diski li jinħarġu

en: Select file
mt: Agħżel fajl

en: The backup partition table has not the same size
    Still continue?
mt: Il-kopja tat-tabella tal-partizzjonijiet m'għandiex l-istess daqs.
    Tkompli xorta?

en: Trying to rescue partition table
mt: Qed nipprova nsalva t-tabella ta' partizzjonijiet

en: Detailed information
mt: Informazzjoni dettaljata

en: Resize
mt: Ibdel daqs

en: Format
mt: Formattja

en: Add to RAID
mt: Żid ma' RAID

en: Add to LVM
mt: Żid ma' LVM

en: Remove from RAID
mt: Neħħi mir-RAID

en: Remove from LVM
mt: Neħħi mill-LVM

en: Modify RAID
mt: Biddel RAID

en: Use for loopback
mt: Uża bħala loopback

en: Create a new partition
mt: Oħloq partizzjoni ġdida

en: Start sector:
mt: Settur tal-bidu:

en: Size in MB:
mt: Daqs f' MB:

en: Filesystem type:
mt: Tip ta' filesystem:

en: Preference:
mt: Preferenzi:

en: Logical volume name
mt: Isem tal-volum loġiku

en: You can not create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
mt: Ma nistax noħloq partizzjoni ġdida
    (għax ilħaqt il-limitu ta' partizzjonijiet primarji).
    L-ewwel neħħi partizzjoni primarja u oħloq partizzjoni estiża.

en: Remove the loopback file?
mt: Trid tneħħi l-fajl ta' loopback?

en: After changing type of partition %s, all data on this partition will be lost
mt: Jekk tibdel it-tip ta' partizzjoni %s, l-informazzjoni kollha li hemm fuqha tintilef

en: Change partition type
mt: Ibdel tip ta' partizzjoni

en: Which filesystem do you want?
mt: Liema filesystem trid?

en: Switching from ext2 to ext3
mt: Qed nibdel minn ext2 għal ext3

en: Where do you want to mount the loopback file %s?
mt: Fejn trid timmonta l-fajl ta' loopback %s?

en: Where do you want to mount device %s?
mt: Fejn trid timmonta d-diska %s?

en: Can not unset mount point as this partition is used for loop back.
    Remove the loopback first
mt: Ma nistax inneħħi l-punt ta' mmuntar għax din il-partizzjoni qed tintuża għal loopback.
    L-ewwel neħħiha minn loopback

en: Where do you want to mount %s?
mt: Fejn trid timmonta %s?

en: Resizing
mt: Qed nibdel id-daqs

en: Computing FAT filesystem bounds
mt: Qed nikkalkula l-limiti tal-filesystem FAT

en: This partition is not resizeable
mt: Din il-partizzjoni ma tistax tinbidel id-daqs tagħha

en: All data on this partition should be backed-up
mt: L-informazzjoni kollha fuq din il-partizzjoni għandha tiġi kkupjata fuq kopja tas-sigurtà

en: After resizing partition %s, all data on this partition will be lost
mt: Wara li tibdel id-daqs tal-partizzjoni %s, l-informazzjoni kollha fuqha tintilef

en: Choose the new size
mt: Agħżel id-daqs il-ġdid

en: New size in MB:
mt: Daqs ġdid f'MB:

en: To ensure data integrity after resizing the partition(s), 
    filesystem checks will be run on your next boot into Windows(TM)
mt: Biex tassigura l-integrità tad-data wara li tibdel id-daqs tal-partizzjoni(jiet),
    se jiġu ċċekkjati l-filesystems meta terġa' tibbutja l-Windows(TM)

en: Choose an existing RAID to add to
mt: Agħżel RAID eżistenti biex iżżid miegħu

en: new
mt: ġdid

en: Choose an existing LVM to add to
mt: Agħżel LVM eżistenti biex iżżid miegħu

en: LVM name?
mt: Isem tal-LVM?

en: This partition can not be used for loopback
mt: Din il-partizzjoni ma tistax tintuża għal loopback

en: Loopback file name:
mt: Isem ta' fajl għal loopback:

en: Give a file name
mt: Agħti isem ta' fajl

en: File is already used by another loopback, choose another one
mt: Fajl diġà qed jintuża minn loopback ieħor, agħżel ieħor

en: File already exists. Use it?
mt: Fajl diġà jeżisti. Tuża lilu?

en: Mount options
mt: Għażliet għall-immuntar

en: Various
mt: Varji

en: device
mt: apparat

en: level
mt: livell

en: chunk size in KiB
mt: daqs ta' "chunk" f' KiB

en: Be careful: this operation is dangerous.
mt: Oqgħod attent: dan il-proċess huwa perikoluż.

en: What type of partitioning?
mt: X'tip ta' partizzjoni?

en: You'll need to reboot before the modification can take place
mt: Trid tirristartja sabiex il-bidliet ikollhom effett.

en: Partition table of drive %s is going to be written to disk!
mt: It-tabella tal-partizzjonijiet tad-diska %s se tinkiteb fuq id-diska.

en: After formatting partition %s, all data on this partition will be lost
mt: Wara li tifformattja l-partizzjoni %s, l-informazzjoni kollha fuqha tintilef.

en: Move files to the new partition
mt: Mexxi fajls għal partizzjoni ġdida

en: Hide files
mt: Aħbi fajls

en: Directory %s already contains data
    (%s)
mt: Id-direttorju %s diġà fih xi fajls
    (%s)

en: Moving files to the new partition
mt: Qed jitmexxew il-fajls għal partizzjoni ġdida

en: Copying %s
mt: Qed nikkopja %s

en: Removing %s
mt: Qed inneħħi %s

en: partition %s is now known as %s
mt: partizzjoni %s issa magħrufa bħala %s

en: Device:
mt: Apparat:

en: Devfs name:
mt: Isem ta' Devfs:

en: Volume label:
mt: Isem il-volum:

en: DOS drive letter: %s (just a guess)
mt: Ittra tad-diska fid-DOS: %s (probabbli)

en: Type:
mt: Tip:

en: Name:
mt: Isem:

en: Start: sector %s
mt: Bidu: settur %s

en: Size: %s
mt: Daqs: %s

en: , %s sectors
mt: , %s setturi

en: Cylinder %d to %d
mt: Ċilindri %d sa %d

en: Number of logical extents: %d
mt: Numru ta' "logical extents": %d

en: Formatted
mt: Formattjat

en: Not formatted
mt: Mhux formattjat

en: Mounted
mt: Immuntat

en: Loopback file(s):
       %s
mt: Fajl/s ta' loopback:
       %s

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
mt: Partizzjoni li tibda' impliċitament
        (għad-DOS/Windows, mhux għal-lilo)

en: Level %s
mt: Livell %s

en: Chunk size %d KiB
mt: Daqs ta' "chunk" %d KiB

en: RAID-disks %s
mt: Diski RAID %s

en: Loopback file name: %s
mt: Isem ta' fajl loopback: %s

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
mt: 
    Aktarx, din il-partizzjoni
    hija partizzjoni ta' Driver,
    jaqbillek tħalliha kif inhi.

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
mt: 
    Din il-partizzjoni speċjali
    "bootstrap" qegħda biex
    tagħżel OS meta tixgħel.

en: Read-only
mt: Jinqara biss

en: Size: %s
mt: Daqs: %s

en: Geometry: %s cylinders, %s heads, %s sectors
mt: Ġeometrija: %s ċilindri, %s heads, %s setturi

en: LVM-disks %s
mt: Diski LVM %s

en: Partition table type: %s
mt: Tip ta' tabella tal-partizzjonijiet: %s

en: on channel %d id %d
mt: fuq kanal %d id %d

en: Filesystem encryption key
mt: Ċavetta taċ-ċifrazzjoni tal-filesystem (password)

en: Choose your filesystem encryption key
mt: Agħżel ċavetta għaċ-ċifrazzjoni tal-filesystem

en: This encryption key is too simple (must be at least %d characters long)
mt: Din iċ-ċavetta taċ-ċifrazzjoni huwa sempliċi wisq (irid ikun twil tal-inqas %d ittri)

en: The encryption keys do not match
mt: Iċ-ċifrarji ma jaqblux

en: Encryption key
mt: Ċavetta taċ-ċifrazzjoni

en: Encryption key (again)
mt: Ċavetta taċ-ċifrazzjoni (darb' oħra)

en: Change type
mt: Ibdel tip

en: Can not login using username %s (bad password?)
mt: Ma nistax nilloggja bil-user "%s" (password ħażin?)

en: Domain Authentication Required
mt: Awtentikazzjoni tad-dominju meħtieġ

en: Which username
mt: Liema user

en: Another one
mt: Ieħor

en: Please enter your username, password and domain name to access this host.
mt: Jekk jogħġbok daħħal il-user, password u dominju biex taċċessa dan il-kompjuter

en: Username
mt: User

en: Search servers
mt: Fittex servers

en: Search new servers
mt: Fittex servers ġodda

en: The package %s needs to be installed. Do you want to install it?
mt: Irid jiġi nstallat il-pakkett %s. Tridni ninstallah?

en: Mandatory package %s is missing
mt: Pakkett meħtieġ %s huwa nieqes

en: Installing packages...
mt: Qed ninstalla pakketti...

en: Removing packages...
mt: Qed jitneħħew pakketti...

en: Mounting partition %s
mt: Qed nimmonta partizzjoni %s

en: mounting partition %s in directory %s failed
mt: immuntar ta' partizzjoni %s fid-direttorju %s falla

en: Checking %s
mt: Qed niċċekkja %s

en: error unmounting %s: %s
mt: problema fl-iżmuntar ta' %s: %s

en: Enabling swap partition %s
mt: Qed nixgħel partizzjoni swap %s

en: Formatting partition %s
mt: Qed nifformattja partizzjoni %s

en: Creating and formatting file %s
mt: Qed noħloq u nifformattja fajl %s

en: I do not know how to format %s in type %s
mt: Ma nafx kif nifformattja %s b'tip %s

en: %s formatting of %s failed
mt: %s formattjar ta' %s falla

en: Do not update inode access times on this file system
    (e.g, for faster access on the news spool to speed up news servers).
mt: Taġġornax ħinijiet ta' aċċess fuq din is-sistema ta' fajls
    (eż, għal aċċess iżjed malajr fid-direttorju spool ta' news server).

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
mt: Jista' biss jiġi mmuntat espliċitament (i.e.,
    l-għażla -a ma jimmontax din is-sistema ta' fajls).

en: Do not interpret character or block special devices on the file system.
mt: Tinterpretax apparat speċjali ta' karattri jew blokk fuq is-sistema ta' fajls.

en: Do not allow execution of any binaries on the mounted
    file system. This option might be useful for a server that has file systems
    containing binaries for architectures other than its own.
mt: Tħallix it-tħaddim ta' programmi minn fuq din is-sistema ta' fajls. Din l-għażla
    tista' tkun utli fuq server li għandu binarji għal arkitettura differenti.

en: Do not allow set-user-identifier or set-group-identifier
    bits to take effect. (This seems safe, but is in fact rather unsafe if you
    have suidperl(1) installed.)
mt: Tippermettix li l-bits set-user-identifier jew set-group-identifier 
    ikollhom effett. (Dan jidher bla problemi, imma fil-fatt jista' joħloq problemi
    jekk għandek suidperl(1) installat)

en: Mount the file system read-only.
mt: Immonta s-sistema ta' fajls tinqara biss.

en: All I/O to the file system should be done synchronously.
mt: L-I/O fuq is-sistema ta' fajls għandu jsir b'mod sinkronu.

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
mt: Ippermetti user normali li jimmonta s-sistema ta' fajls. L-isem ta'
    min jimmonta jinkiteb f' mtab ħalli jkun jista' jerġa' jiżmonta s-sistema.
    Din l-għażla impliċitament tinkludi noexec, nosuid u nodev sakemm ma
    jiġux espliċitament inklużi fil-linja ta' kmand.

en: Give write access to ordinary users
mt: Agħti aċċess għall-ktib lil utenti normali

en: Give read-only access to ordinary users
mt: Agħti aċċess għall-qari lil utenti normali

en: You can not use JFS for partitions smaller than 16MB
mt: Ma tistax tuża JFS għal partizzjonijiet iżgħar minn 16MB

en: You can not use ReiserFS for partitions smaller than 32MB
mt: Ma tistax tuża ReiserFS għal partizzjonijiet iżgħar minn 32MB

en: with /usr
mt: b' /usr

en: I can not read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
mt: Ma nistax naqra t-tabella tal-partizzjonijiet għall-apparat %s, hija 
    korrotta wisq. Nista' nkompli billi nħassar partizzjonijiet ħżiena 
    (L-INFORMAZZJONI KOLLHA tintilef). L-alternattiva hi li ma tħallix 
    lill DrakX ibiddel it-tabella tal-partizzjonijiet (il-problema hi 
    %s)
    
    Trid titlef il-partizzjonijiet kollha?

en: Mount points must begin with a leading /
mt: Punti ta' mmuntar iridu jibdew b' /

en: Mount points should contain only alphanumerical characters
mt: Punti tal-immunar jista' jkun fihom biss ittri u numri

en: There is already a partition with mount point %s
mt: Diġà hemm partizzjoni b'punt ta' mmuntar %s

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    Please be sure to add a /boot partition
mt: Int għażilt partizzjoni software-RAID bħala root (/).
    Ebda bootloader m'hu kapaċi jħaddem dan mingħajr partizzjoni /boot.
    Għalhekk aċċerta li jkollok partizzjoni /boot mhux fuq ir-RAID.

en: You can not use a LVM Logical Volume for mount point %s
mt: Ma tistax tuża volum loġiku LVM għall-punt ta' mmuntar %s

en: You've selected a LVM Logical Volume as root (/).
    The bootloader is not able to handle this without a /boot partition.
    Please be sure to add a /boot partition
mt: Int għażilt volum loġiku LVM bħala root (/).
    Ebda bootloader m'hu kapaċi jħaddem dan mingħajr partizzjoni /boot.
    Għalhekk aċċerta li jkollok partizzjoni /boot mhux fuq ir-RAID.

en: You may not be able to install lilo (since lilo does not handle a LV on multiple PVs)
mt: Għandu mnejn ma tkunx tista' tinstalla LILO (peress li LILO ma jippermettix LV fuq iżjed minn PV wieħed)

en: This directory should remain within the root filesystem
mt: Dan id-direttorju irid jibqa' fil-filesystem root.

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
mt: Għandek bżonn filesystem vera (ext2/ext3, reiserfs, xfs jew jfs) għal dan il-punt ta' mmuntar

en: You can not use an encrypted file system for mount point %s
mt: Ma tistax tuża filesystem iċċifrat għall-punt ta' mmuntar %s

en: Not enough free space for auto-allocating
mt: M'hemmx biżżejjed spazju għal awto-allokazzjoni

en: Nothing to do
mt: M'hemm xejn x'nagħmel

en: Floppy
mt: Flopi

en: Zip
mt: Żip

en: Hard Disk
mt: Diska

en: Tape
mt: Tejp

en: Videocard
mt: Kard tal-video

en: Tvcard
mt: Kard TV

en: Other MultiMedia devices
mt: Tagħmir multimedia ieħor

en: Soundcard
mt: Kard awdjo

en: Processors
mt: Proċessaturi

en: ISDN adapters
mt: Kard ISDN

en: Ethernetcard
mt: Kard Ethernet

en: ADSL adapters
mt: ADSL kard

en: Memory
mt: Memorja

en: AGP controllers
mt: Kontrollaturi AGP

en: Joystick
mt: Ġojstik

en: (E)IDE/ATA controllers
mt: Kontrollaturi (E)IDE/ATA

en: SATA controllers
mt: Kontrollaturi SATA

en: Firewire controllers
mt: Kontrollaturi tal-firewire

en: PCMCIA controllers
mt: Kontrollaturi PCMCIA

en: SCSI controllers
mt: Kontrollaturi SCSI

en: USB controllers
mt: Kontrollaturi USB

en: USB ports
mt: Ports USB

en: SMBus controllers
mt: Kontrollaturi SMBus

en: Bridges and system controllers
mt: Bridges u kontrollaturi tas-sistema

en: Keyboard
mt: Tastiera

en: Mouse
mt: Maws

en: Scanner
mt: Skaner

en: Unknown/Others
mt: Mhux magħruf/oħrajn

en: Please Wait... Applying the configuration
mt: Stenna ftit... qed napplika l-konfigurazzjoni

en: No alternative driver
mt: Ebda drajver alternattiv

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
mt: M'hemm ebda drajver alternattiv OSS/ALSA għall-kard awdjo tiegħek (%s) li bħalissa tuża "%s"

en: Sound configuration
mt: Konfigurazzjoni tal-awdjo

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
mt: Hawn tista' tagħżel drajver alternattiv  (OSS jew ALSA) għall-kard awdjo tiegħek (%s).

note: -PO: here the first %s is either "OSS" or "ALSA", -PO: the second %s is the name of the current driver -PO: and the third %s is the name of the default driver
en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
mt: 
    
    Il-kard tiegħek tuża d-drajver %s"%s" (id-drajver impliċitu għall-kard tiegħekhuwa "%s").

en: OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.
    What's more, OSS drivers all reinvent the wheel.
    
    ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
    supports quite a large range of ISA, USB and PCI cards.
    
    It also provides a much higher API than OSS.
    
    To use alsa, one can either use:
    - the old compatibility OSS api
    - the new ALSA api that provides many enhanced features but requires using the ALSA library.
mt: OSS (Open Sound System) kien l-ewwel API tal-awdjo. Huwa API indipendenti mis-sistema operattiva (huwa disponibbli fuq diversi forom ta' UNIX(tm)) imma huwa API bażiku u limitat ħafna.
    Apparti minn dan, id-drajvers tal-OSS kollha jirrepetu ħafna affarijiet.
    
    ALSA (Advanced Linux Sound Architecture) hija arkitettura modulari li jissapportja ħafna kards ISA, USB u PCI.
    
    Hija tipprovdi API ħafna iżjed komprensiv mill-OSS.
    Biex tuża l-ALSA, tista' tuża:
    - l-API qadim għall-kompatibbiltà mal-OSS
    - l-API il-ġdid li jipprovdi diversi faċilitajiet ġodda imma jiħtieġ l-użu tal-libreriji l-ġodda ALSA.

en: Driver:
mt: Drajver:

en: Trouble shooting
mt: Identifikazzjoni ta' problemi

en: Warning
mt: Twissija

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver will only be used on next bootstrap.
mt: Id-drajver "%s" antik huwa mmarkat li hu ħażin.
    
    Huwa rrapportat li jikkawża problemi fil-kernel waqt it-tneħħija.
    
    Id-drajver il-ġdid "%s" jintuża biss għall-istartjar li jmiss.

en: No open source driver
mt: Ebda drajver sors miftuħ

en: There's no free driver for your sound card (%s), but there's a proprietary driver at "%s".
mt: M'hemm ebda drajver ab'xejn OSS/ALSA għall-kard awdjo tiegħek (%s),imma hemm drajver propjetarju f' "%s"

en: No known driver
mt: Ebda drajver magħruf

en: There's no known driver for your sound card (%s)
mt: M'hemm ebda drajver magħruf għall-kard awdjo tiegħek (%s)

en: Unknown driver
mt: Drajver mhux magħruf

en: Error: The "%s" driver for your sound card is unlisted
mt: Problema: Id-drajver %s għall-kard awdjo tiegħek mhux elenkat

en: Sound trouble shooting
mt: Sib problemi fl-awdjo

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card uses
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
mt: It-tester klassiku ta' bugs ta' l-awdjo se jħaddem dawn il-kmandijiet:
    
    
    - "lspcidrake -v | fgrep AUDIO" jgħidlek liema drajver juża impliċitament
    il-kard tiegħek.
    - "grep sound-slot /etc/modules.conf" jgħidlek liema drajver juża bħalissa
    
    - "/sbin/lsmod" jippermettilek tiċċekkja jekk il-modulu (drajver) hux
    imtella' jew le.
    
    - "/sbin/chkconfig --list sound" u "/sbin/chkconfig --list alsa" 
    jgħidulek jekk is-servizzi sound u alsa humiex konfigurati biex jitilgħu
    f'initlevel 3
    
    - "aumix -q" jgħidlek jekk il-volum tal-awdjo hux mitfu jew le
    
    - "/sbin/fuser -v /dev/dsp" jgħidlek liema programm qed juża l-kard
    tal-awdjo.

en: Let me pick any driver
mt: Ħallini nagħżel drajver ieħor

en: Choosing an arbitrary driver
mt: Agħżel drajver arbitrarju

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: If you really think that you know which driver is the right one for your card
    you can pick one in the above list.
    
    The current driver for your "%s" sound card is "%s"
mt: Jekk taħseb li taf liema drajver huwa dak adattat għall-kard tiegħek,
    tista' tagħżel wieħed mil-lista ta' fuq.
    
    Id-drajver kurrenti għall-kard awdjo "%s" tiegħek huwa "%s".

en: Auto-detect
mt: Għarfien awtomatiku

en: Unknown|Generic
mt: Mhux magħruf/Ġeneriku

en: Unknown|CPH05X (bt878) [many vendors]
mt: Mhux magħruf|CPH05X (bt878) [diversi manifatturi]

en: Unknown|CPH06X (bt878) [many vendors]
mt: Mhux magħruf|CPH06X (bt878) [diversi manifatturi]

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
mt: Għal ħafna kards tat-TV moderni, il-modulu bttv tal-kernel GNU/Linux awtomatikament isib il-parametri tajba.
    Jekk il-kard ma tingħarafx sew, tista' ġġegħlu jieħu t-tuner u kard it-tajba minn hawn. Sempliċiment agħżel il-kard u parametri jekk meħtieġa.

en: Card model:
mt: Mudell tal-kard :

en: Tuner type:
mt: Tip ta' tuner :

en: Number of capture buffers:
mt: Numru ta' buffers għall-kattura :

en: number of capture buffers for mmap'ed capture
mt: numru ta' buffers għall-kattura mmapp

en: PLL setting:
mt: Seting PLL :

en: Radio support:
mt: Sapport għar-radju :

en: enable radio support
mt: ippermetti sapport għal radju

en: Before continuing, you should carefully read the terms of the license. It
    covers the entire Mandrakelinux distribution. If you agree with all the
    terms it contains, check the "%s" box. If not, clicking on the "%s"
    button will reboot your computer.
mt: Qabel tkompli int mitlub taqra sew it-termini ta' din il-liċenzja. Hija
    tkopri d-distribuzzjoni sħiħa ta' Mandrakelinux. Jekk taqbel mat-termini
    kollha tagħha, agħfas il-buttuna "%s". Jekk ma taqbilx, agħfas "%s" biex
    tirributja l-kompjuter.

en: Accept
mt: Naċċetta

en: GNU/Linux is a multi-user system which means each user can have his or her
    own preferences, own files and so on. But unlike "root", who is the
    system administrator, the users you add at this point will not be authorized
    to change anything except their own files and their own configurations,
    protecting the system from unintentional or malicious changes which could
    impact on the system as a whole. You'll have to create at least one regular
    user for yourself -- this is the account which you should use for routine,
    day-to-day usage. Although it's very easy to log in as "root" to do
    anything and everything, it may also be very dangerous! A very simple
    mistake could mean that your system will not work any more. If you make a
    serious mistake as a regular user, the worst that can happen is that you'll
    lose some information, but you will not affect the entire system.
    
    The first field asks you for a real name. Of course, this is not mandatory
    -- you can actually enter whatever you like. DrakX will use the first word
    you type in this field and copy it to the "%s" one, which is the name
    this user will enter to log onto the system. If you like, you may override
    the default and change the user name. The next step is to enter a password.
    From a security point of view, a non-privileged (regular) user password is
    not as crucial as the "root" password, but that's no reason to neglect it
    by making it blank or too simple: after all, your files could be the ones
    at risk.
    
    Once you click on "%s", you can add other users. Add a user for each one
    of your friends, your father, your sister, etc. Click "%s" when you're
    finished adding users.
    
    Clicking the "%s" button allows you to change the default "shell" for
    that user (bash by default).
    
    When you're finished adding users, you'll be asked to choose a user who
    will be automatically logged into the system when the computer boots up. If
    you're interested in that feature (and do not care much about local
    security), choose the desired user and window manager, then click on
    "%s". If you're not interested in this feature, uncheck the "%s" box.
mt: GNU/Linux hija sistema operattiva "multi-user", li jfisser li l-utenti 
    kollha jistgħu ikollhom il-preferenzi tagħhom, fajls personali eċċ. Imma, 
    għall-kuntrarju tal-user "root", li huwa l-amministratur tas-sistema, 
    l-utenti li żżid hawn ma jkunu jistgħu jibdlu xejn ħlief il-fajls u 
    konfigurazzjoni personali tagħhom. Dan jipproteġi lis-sistema minn bidliet 
    mhux intenzjonati jew malizzjużi li jaffettwaw lis-sistema sħiħa. Trid 
    toħloq ta' l-inqas utent regolari wieħed għalik. Dan huwa l-kont li bih 
    għandek tagħmel ix-xogħol ta' kuljum. Filwaqt li jista' jkun iżjed faċli 
    tuża l-user "root" ta' kuljum, dan huwa perikoluż ħafna. L-iċken żball 
    jista' jwaqqaf is-sistema milli taħdem. Jekk tagħmel anke żball serju b'user
    regolari, tista' titlef xi informazzjoni imma mhux is-sistema sħiħa.
    
    L-ewwel trid iddaħħal l-isem veru tiegħek. Dan mhux bilfors, ovvjament, u
    fil-fatt tista' ddaħħal li trid. DrakX imbagħad jieħu l-ewwel kelma u 
    jpoġġiha f' "%s". Dan huwa l-isem li jintuża biex tidħol fis-sistema. 
    Tista' tibdel dan l-isem, imbagħad daħħal password. Filwaqt li l-password 
    ta' user regolari mhux kruċjali daqs ta' root, dejjem jaqbillek tagħżel 
    password tajjeb - ftakar li hemm il-fajls tiegħek fin-nofs.
    
    Jekk tagħfas "%s", tista' żżid users oħra kemm hemm bżonn. Tista' żżid
    utenti għal ħutek, it-tfal jew ġenituri, jew lill-ħbieb, per eżempju. 
    Meta tlesti milli żżid il-users kollha li trid, agħfas "%s".
    
    Jekk tagħfas il-buttuna "%s", tkun tista' tbiddel ix-"shell" 
    impliċita tal-user, li normalment tkun "bash".
    
    Meta tlesti toħloq users, int tintalab tagħżel user li awtomatikament 
    jiġi lloggjat fis-sistema meta tixgħel. Jekk trid tuża din il-faċilità (u
    m'intix konċernat dwar sigurtà lokali), agħżel il-user li tixtieq u d-desktop,
    u agħfas "%s". Jekk ma tixtieqx tuża din il-faċilità, neħħi l-marka 
    mill-kaxxa "%s".

en: User name
mt: Isem tal-user

en: Next
mt: Li jmiss

en: Advanced
mt: Avvanzat

en: Listed here are the existing Linux partitions detected on your hard drive.
    You can keep the choices made by the wizard, since they are good for most
    common installations. If you make any changes, you must at least define a
    root partition ("/"). Do not choose too small a partition or you will not
    be able to install enough software. If you want to store your data on a
    separate partition, you will also need to create a "/home" partition
    (only possible if you have more than one Linux partition available).
    
    Each partition is listed as follows: "Name", "Capacity".
    
    "Name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard drive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". For IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
mt: Hawn issib il-partizzjonijiet ta' Linux li nstabu fuq id-diska. Tista' 
    żżomm l-għażliet li għamel is-saħħar, huma tajbin għal ħafna każi.
    Jekk tagħmel tibdiliet, trid ta' l-inqas tiddefinixxi partizzjoni root ("/")
    Tagħżilx daqs żgħir wisq inkella ma tkunx tista' tinstalla l-programmi
    kollha li jkollok bżonn. Jekk tixtieq iżżomm l-informazzjoni fuq partizzjoni
    separata, trid toħloq ukoll partizzjoni għal "/home" (għal dan irid ikollok
    iżjed minn partizzjoni waħda Linux).
    
    Kull partizzjoni hija mniżżla b'dan il-mod: "Isem", "Daqs".
    
    L-isem huwa mqassam hekk: "tip ta' diska", "numru ta' diska", "numru
    tal-partizzjoni", per eżempju, "hda1". 
    
    It-tip ta' diska huwa "hd" jekk id-diska hija tip IDE, u "sd" jekk hija 
    tip SCSI.
    
    In-numru tad-diska huwa l-ittra ta' wara "hd" jew "sd". Għal diski IDE,
    "a" hija d-diska "master" fuq il-kontrollatur IDE primarju,
    "b" hija d-diska skjav fuq il-kontrollatur IDE primarju,
    "c" hija d-diska "master" fuq il-kontrollatur IDE sekondarju,
    "d" hija d-diska skjav fuq il-kontrollatur IDE sekondarju
    
    Fuq diski SCSI, "a" hija d-diska bl-iżjed ID baxx, "b" hija t-tieni, eċċ.

en: The Mandrakelinux installation is distributed on several CD-ROMs. If a
    selected package is located on another CD-ROM, DrakX will eject the current
    CD and ask you to insert the required one. If you do not have the requested
    CD at hand, just click on "%s", the corresponding packages will not be
    installed.
mt: L-installazzjoni ta' Mandrakelinux hija maqsuma fuq diversi CD-ROMs. Jekk
    pakkett qiegħed fuq CD-ROM oħra, DrakX jiftaħ is-CDROM u jitolbok iddaħħal is-
    CD li jmiss. Jekk m'għandekx dik is-CD tista' tikklikkja "%s" u l-pakketti li
    hemm fuq dik is-CD ma jiġux installati.

en: It's now time to specify which programs you wish to install on your system.
    There are thousands of packages available for Mandrakelinux, and to make it
    simpler to manage, they have been placed into groups of similar
    applications.
    
    Mandrakelinux sorts package groups in four categories. You can mix and
    match applications from the various categories, so a ``Workstation''
    installation can still have applications from the ``Server'' category
    installed.
    
     * "%s": if you plan to use your machine as a workstation, select one or
    more of the groups in the workstation category.
    
     * "%s": if you plan on using your machine for programming, select the
    appropriate groups from that category. The special "LSB" group will
    configure your system so that it complies as much as possible with the
    Linux Standard Base specifications.
    
       Selecting the "LSB" group will also install the "2.4" kernel series,
    instead of the default "2.6" one. This is to ensure 100%%-LSB compliance
    of the system. However, if you do not select the "LSB" group you will
    still have a system which is nearly 100%% LSB-compliant.
    
     * "%s": if your machine is intended to be a server, select which of the
    more common services you wish to install on your machine.
    
     * "%s": this is where you will choose your preferred graphical
    environment. At least one must be selected if you want to have a graphical
    interface available.
    
    Moving the mouse cursor over a group name will display a short explanatory
    text about that group.
    
    You can check the "%s" box, which is useful if you're familiar with the
    packages being offered or if you want to have total control over what will
    be installed.
    
    If you start the installation in "%s" mode, you can deselect all groups
    and prevent the installation of any new packages. This is useful for
    repairing or updating an existing system.
    
    If you deselect all groups when performing a regular installation (as
    opposed to an upgrade), a dialog will pop up suggesting different options
    for a minimal installation:
    
     * "%s": install the minimum number of packages possible to have a
    working graphical desktop.
    
     * "%s": installs the base system plus basic utilities and their
    documentation. This installation is suitable for setting up a server.
    
     * "%s": will install the absolute minimum number of packages necessary
    to get a working Linux system. With this installation you will only have a
    command-line interface. The total size of this installation is about 65
    megabytes.
mt: Issa wasal il-mument fejn tagħżel liema programmi tixtieq tinstalla fuq
    is-sistema tiegħek. Hemm eluf ta' pakketti disponibbli għal Mandrakelinux,
    u biex ikun iżjed faċli timmaniġġjahom, qegħdin imqassmin fi gruppi ta'
    programmi simili.
    
    Mandrakelinux iqassam il-gruppi ta' pakketti fi tlett kategoriji. Tista' 
    tagħżel u tħallat programmi minn diversi kategoriji, jiġifieri installazzjoni
    "workstation" tista' tinkludi programmi mis-sezzjoni "server", eċċ.
     * "%s": jekk fi ħsiebek tuża l-kompjuter bħala workstation, 
    agħżel wieħed jew iżjed mill-gruppi li tixtieq.
    
     * "%s": jekk tixtieq tuża l-kompjuter biex tipprogramma, agħżel
    il-gruppi li trid minn din il-kategorija. Il-grupp speċjali "LSB"
    jikkonfiguralek is-sistema sabiex tiġi taqbel kemm jista' jkun ma' l-
    ispeċifikazzjonijiet "Linux Standard Base". Però jekk ma tagħżilx
    il-grupp LSB xorta jkollok sistema li hija kważi 100%% kompatibbli ma' LSB
     * "%s": jekk il-kompjuter huwa intenzjonat bħala server. tista' tagħżel
    l-iżjed servizzi komuni li tixtieq tinstalla fuq il-magna.
    
     * "%s": hawnhekk tista' tagħżel l-ambjent grafiku li 
    tippreferi. Ta' l-inqas trid tagħżel wieħed minn dawn jekk trid li jkollok 
    ambjent grafiku.
    
    Jekk tmexxi l-maws fuq wieħed mill-ismijiet tara deskrizzjoni qasira dwar dak
    il-grupp.
    
    Tista' timmarka l-kaxxa "%s", li hija utli jekk int familjari mal-pakketti
    disponibbli, jew jekk trid li jkollok kontroll assolut fuq dak li se jiġi
    nstallat.
    
    Jekk tibda' l-installazzjoni fil-modalità %s, tista' tneħħi l-gruppi kollha
    u ma tħallix li jiġu nstallati pakketti ġodda. Dan huwa utli biex issewwi
    jew taġġorna sistema eżistenti.
    
    Jekkt neħħi l-gruppi kollha waqt installazzjoni normali (mhux aġġornament),
    tintwera għażla li tissuġġerixxi għażliet differenti għal installazzjoni 
    minima: * "%s" tinstalla s-sistema bażika flimkien mal-minimu ta'
    pakketti għal sistema grafika;
    
     * "%s" tinstalla s-sistema bażika flimkien ma' xi
    programmi sempliċi u d-dokumentazzjoni tagħhom. Dan huwa tajjeb għal server.
    
     * "%s" tinstalla strettament l-inqas pakketti 
    possibbli sabiex ikollok Linux b'linja ta' kmand. Din l-installazzjoni tieħu
    biss madwar 65MB.

en: Development
mt: Żviluppar

en: Graphical Environment
mt: Ambjent Grafiku

en: Individual package selection
mt: Agħżel pakketti individwalment

en: Upgrade
mt: Aġġornament

en: With X
mt: Bl-XWindows

en: With basic documentation
mt: B' dokumentazzjoni bażika

en: Truly minimal install
mt: Installazzjoni assolutament minima

en: If you choose to install packages individually, the installer will present
    a tree containing all packages classified by groups and subgroups. While
    browsing the tree, you can select entire groups, subgroups, or individual
    packages.
    
    Whenever you select a package on the tree, a description will appear on the
    right to let you know the purpose of that package.
    
    !! If a server package has been selected, either because you specifically
    chose the individual package or because it was part of a group of packages,
    you'll be asked to confirm that you really want those servers to be
    installed. By default Mandrakelinux will automatically start any installed
    services at boot time. Even if they are safe and have no known issues at
    the time the distribution was shipped, it is entirely possible that
    security holes were discovered after this version of Mandrakelinux was
    finalized. If you do not know what a particular service is supposed to do or
    why it's being installed, then click "%s". Clicking "%s" will install
    the listed services and they will be started automatically at boot time. !!
    
    The "%s" option is used to disable the warning dialog which appears
    whenever the installer automatically selects a package to resolve a
    dependency issue. Some packages depend on others and the installation of
    one particular package may require the installation of another package. The
    installer can determine which packages are required to satisfy a dependency
    to successfully complete the installation.
    
    The tiny floppy disk icon at the bottom of the list allows you to load a
    package list created during a previous installation. This is useful if you
    have a number of machines that you wish to configure identically. Clicking
    on this icon will ask you to insert the floppy disk created at the end of
    another installation. See the second tip of the last step on how to create
    such a floppy.
mt: Jekk għażiltx li tagħżel il-pakketti individwalment, tiġi
    offruta lista tal-pakketti kollha klassifikati fi gruppi. Waqt li qed tifli 
    din il-lista, tista' tagħżel gruppi sħaħ jew pakketti individwali.
    
    Meta tagħżel pakkett fil-lista, tidher deskrizzjoni maġenbha fuq il-lemin
    li tgħidlek għal xiex jintuża dak il-pakkett.
    !! Jekk pakkett ta' server jiġi installat intenzjonalment jew għax jifforma
    parti minn grupp, int tintalab tikkonferma jekk verament tridx lill dawn
    is-servizzi jiġu nstallati. Fil-Mandrakelinux, is-servizzi li tinstalla jiġu
    mtella' awtomatikament meta tixgħel. Għalkemm dawn kienu siguri u ma kien fihom
    ebda problemi meta din il-verżjoni ta' Linux inħarġet, jista' jkun li jinstabu
    problemi simili wara li ġiet finalizzata din il-verżjoni. Jekk ma tafx 
    x'suppost jagħmel servizz partikulari jew għaliex qed jiġi nstallat, agħżel
    "%s". Jekk tagħfas "%s" dawn is-servizzi jiġu nstallati u jiġu mtella' 
    awtomatikament fil-bidu.
    
    L-għażla "%s" sempliċiment titfi l-window li twissik
    kull meta l-installazzjoni tkun se żżid xi pakketti oħra meħtieġa. Dan jiġri
    għax il-programm ikun induna li jinħtieġ pakkett ieħor biex il-programmi li
    tkun għażilt jaħdmu sew.
    
    L-ikona ta' diska flopi żgħira fil-qiegħ tippermettilek li ttella' l-
    lista ta' pakketti li ġew magħżula waqt installazzjoni preċedenti. Jekk 
    tikklikkja din l-ikona int tintalab iddaħħal flopi li tkun ħloqt waqt 
    installazzjoni oħra. Ara t-tieni ħjiel fl-aħħar stadju biex tara kif toħloq
    diska simili.

en: No
mt: Le

en: Yes
mt: Iva

en: Automatic dependencies
mt: Dipendenzi awtomatiċi

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to set up a new printer. The interface presented in our
    manual is similar to the one used during installation.
mt: "%s": jekk tagħfas il-buttuna "%s" jinfetaħ saħħar tal-konfigurazzjoni 
    tal-printer. Ikkonsulta l-kapitlu korrispondenti tal-iStarter Guide għal iżjed
    tagħrif dwar kif tissettja printer ġdid. L-interfaċċja preżentata hawn hija simili
    għal dik użata waqt l-installazzjoni.

en: Configure
mt: Ikkonfigura

en: This dialog is used to select which services you wish to start at boot
    time.
    
    DrakX will list all services available on the current installation. Review
    each one of them carefully and uncheck those which are not needed at boot
    time.
    
    A short explanatory text will be displayed about a service when it is
    selected. However, if you're not sure whether a service is useful or not,
    it is safer to leave the default behavior.
    
    !! At this stage, be very careful if you intend to use your machine as a
    server: you probably do not want to start any services which you do not need.
    Please remember that some services can be dangerous if they're enabled on a
    server. In general, select only those services you really need. !!
mt: Hawnhekk tista' tagħżel liema servizzi tixtieq ittella' mal-bidu.
    
    Dawn huma s-servizzi kollha disponibbli mal-konfigurazzjoni kurrenti.
    Iċċekkjahom sew u neħħi dawk li m'għandekx bżonn kull darba li titla'
    s-sistema.
    
    Tintwera spjagazzjoni qasira dwar kull servizz meta dan jingħażel. Però,
    jekk m'intix ċert dwar jekk servizz hux meħtieġ, aħjar tħalli l-għażla
    impliċita.
    !! F'dan l-istadju, oqgħod attent jekk tixtieq tuża l-kompjuter bħala server:
    aktarx ma jkollokx bżonn ittella' servizzi li m'intix se tuża. Ftakar li xi
    servizzi jistgħu ikunu perikolużi fuq server. Bħala regola ġenerali, ħalli
    biss dawk is-servizzi li verament għandek bżonn. !!

en: GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to
    local time according to the time zone you selected. If the clock on your
    motherboard is set to local time, you may deactivate this by unselecting
    "%s", which will let GNU/Linux know that the system clock and the
    hardware clock are in the same time zone. This is useful when the machine
    also hosts another operating system.
    
    The "%s" option will automatically regulate the system clock by
    connecting to a remote time server on the Internet. For this feature to
    work, you must have a working Internet connection. We recommend that you
    choose a time server located near you. This option actually installs a time
    server which can be used by other machines on your local network as well.
mt: GNU/Linux jimmaniġġja l-ħin bħala GMT (Greenwich Mean Time) u jaqilbu għall-
    ħin lokali skond iż-żona orarja li tagħżel. Huwa possibbli però li titfi din
    il-faċilità billi titfi l-għażla "%s" biex il-ħin
    tal-kompjuter jiġi l-istess bħall-ħin tas-sistema. Dan huwa utli jekk il-
    kompjuter tintuża għal sistemi operattivi bħall-Windows.
    
    L-għażla "%s" tħallik awtomatikament 
    tirregola l-ħin billi taqbad ma' server speċjali fuq l-internet. Fil-lista
    li tiġi preżentata, agħżel server viċin tiegħek. Ovvjament irid ikollok
    konnessjoni mal-internet issettjata biex tuża din il-faċilità. Jekk tuża
    din l-għażla jiġi nstallat programm apposta fuq il-kompjuter li jippermettilu
    li jintuża bħala server tal-ħin għal kompjuters oħra fuq in-network lokali.

en: Hardware clock set to GMT
mt: Arloġġ tal-kompjuter issettjat GMT

en: Automatic time synchronization
mt: Sinkronizzazzjoni tal-ħin awtomatiku

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If this is not correct, you can
    choose from this list the card you actually have installed.
    
       In the situation where different servers are available for your card,
    with or without 3D acceleration, you're asked to choose the server which
    best suits your needs.
mt: Kard grafika
    
       L-installatur normalment jagħraf u jikkonfigura l-kard grafika installata
    fuq il-kompjuter tiegħek. Jekk din l-għażla mhix tajba, tista' tagħżel mil-
    lista il-kard li għandek installata.
    
       F'każ li iżjed minn server wieħed jeżisti għall-kard tiegħek, bil- jew 
    mingħajr aċċelerazzjoni 3D, int tintalab tagħżel is-server li jaqdi 
    ħtiġijietek l-aħjar.

en: X (for X Window System) is the heart of the GNU/Linux graphical interface
    on which all the graphical environments (KDE, GNOME, AfterStep,
    WindowMaker, etc.) bundled with Mandrakelinux rely upon.
    
    You'll see a list of different parameters to change to get an optimal
    graphical display.
    
    Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If this is not correct, you can
    choose from this list the card you actually have installed.
    
       In the situation where different servers are available for your card,
    with or without 3D acceleration, you're asked to choose the server which
    best suits your needs.
    
    
    
    Monitor
    
       Normally the installer will automatically detect and configure the
    monitor connected to your machine. If it is not correct, you can choose
    from this list the monitor which is connected to your computer.
    
    
    
    Resolution
    
       Here you can choose the resolutions and color depths available for your
    graphics hardware. Choose the one which best suits your needs (you will be
    able to make changes after the installation). A sample of the chosen
    configuration is shown in the monitor picture.
    
    
    
    Test
    
       Depending on your hardware, this entry might not appear.
    
       The system will try to open a graphical screen at the desired
    resolution. If you see the test message during the test and answer "%s",
    then DrakX will proceed to the next step. If you do not see it, then it
    means that some part of the auto-detected configuration was incorrect and
    the test will automatically end after 12 seconds and return you to the
    menu. Change settings until you get a correct graphical display.
    
    
    
    Options
    
       This steps allows you to choose whether you want your machine to
    automatically switch to a graphical interface at boot. Obviously, you may
    want to check "%s" if your machine is to act as a server, or if you were
    not successful in getting the display configured.
mt: X (għal Sistema X Window) huwa l-qalb ta' l-interfaċċja grafika GNU/Linux
    li fuqu huma bbażati l-ambjenti grafiċi kollha inklużi ma' Mandrakelinux (KDE,
    GNOME, AfterStep, WindowMaker, eċċ).
    
    Tista' tara lista ta' diversi parametri li tista' tibdel sabiex ikollok
    l-aħjar dehra grafika.
    
    Kard Grafika
    
      L-isntallatur normalment jagħraf u jikkonfiguralek il-kard tal-grafika
    li għandek awtomatikament. Jekk dan mhux korrett, tista' tagħżel il-kard
    tajba minn din il-lista.
    
       F'każ fejn jeżistu servers differenti għall-kard tiegħek, bil- jew mingħajr
    aċċelerazzjoni 3D, int tintalab tagħżel liema server l-iżjed japplika għalik,
    
    
    
    Reżoluzzjoni
    
       Hawn tista' tagħżel ir-reżoluzzjoni u numru ta' kuluri disponibbli fuq
    il-ħardwer tiegħek. Agħżel dik li l-iżjed tgħodd għalik (int tkun tista' 
    tibdel l-għażla wara l-installazzjoni). Kampjun tal-konfigurazzjoni magħżula
    tintwera fl-istampa tal-iskrin.
    
    
    
    Test
    
       Skond il-ħardwer li għandek, tista' tintwera din l-għażla.
    
       Is-sistema tipprova tiftaħ skrin grafiku fir-reżoluzzjoni mitliba.
    Jekk tara l-messaġġ waqt it-test u tirrispondi "%s", DrakX jipproċedi għall-
    pass li jmiss. Jekk ma tarahx, ifisser li xi parti mill-konfigurazzjoni
    awtomatika kienet inkorretta u t-test jispiċċa waħdu wara 12-il sekonda, u
    terġa' lura fil-menu. Ibdel is-setings sakemm ikollok wirja korretta grafika
    fuq l-iskrin.
    
    
    
    Għażliet
    
       Dan il-pass iħallik tagħżel jekk tridx lill-kompjuter jidħol f'modalità 
    grafika awtomatikament malli jitla'. Ovvjament, tista tagħżel "%s" jekk il-
    kompjuter se jaħdem bħala server, jew jekk ma rnexxielekx tissettja l-kard
    grafika sew.

en: Monitor
    
       Normally the installer will automatically detect and configure the
    monitor connected to your machine. If it is not correct, you can choose
    from this list the monitor which is connected to your computer.
mt: Skrin
    
       Normalment l-installatur jagħraf u jikkonfiguralek l-iskrin li
    għandek imqabbad awtomatikament. Jekk din l-għażla mhix tajba, tista' 
    tagħżel mil-lista l-iskrin li għandek imqabbad mal-kompjuter.

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    graphics hardware. Choose the one which best suits your needs (you will be
    able to make changes after the installation). A sample of the chosen
    configuration is shown in the monitor picture.
mt: Reżoluzzjoni
    
       Hawn tista' tagħżel ir-reżoluzzjoni u numru ta' kuluri disponibbli fuq 
    il-ħardwer tiegħek. Agħżel dak li l-aħjar jaqdi ħtiġijietek (tista' 
    tibdel l-għażliet tiegħek wara). Kampjun tal-konfigurazzjoni magħżula 
    jintwera fuq l-iskrin.

en: In the situation where different servers are available for your card, with
    or without 3D acceleration, you're asked to choose the server which best
    suits your needs.
mt: Fis-sitwazzjoni fejn hemm servers differenti disponibbli għall-kard tiegħek, bil- jew mingħajr aċċelerazzjoni 3D, int tintalab tagħżel is-server li l-iżjed jaqdi l-ħtiġijiet tiegħek.

en: Options
    
       This steps allows you to choose whether you want your machine to
    automatically switch to a graphical interface at boot. Obviously, you may
    want to check "%s" if your machine is to act as a server, or if you were
    not successful in getting the display configured.
mt: Għażliet
    
      F'dan il-pass, tista' tagħżel jekk tridx l-interfaċċja grafika mill-bidu.
    Ovvjament, tista' tagħżel "%s" jekk il-kompjuter se jintuża biss bħala 
    server, jew jekk ma rnexxielekx tissettja l-X sew.

en: You now need to decide where you want to install the Mandrakelinux
    operating system on your hard drive. If your hard drive is empty or if an
    existing operating system is using all the available space you will have to
    partition the drive. Basically, partitioning a hard drive means to
    logically divide it to create the space needed to install your new
    Mandrakelinux system.
    
    Because the process of partitioning a hard drive is usually irreversible
    and can lead to data losses, partitioning can be intimidating and stressful
    for the inexperienced user. Fortunately, DrakX includes a wizard which
    simplifies this process. Before continuing with this step, read through the
    rest of this section and above all, take your time.
    
    Depending on the configuration of your hard drive, several options are
    available:
    
     * "%s". This option will perform an automatic partitioning of your blank
    drive(s). If you use this option there will be no further prompts.
    
     * "%s". The wizard has detected one or more existing Linux partitions on
    your hard drive. If you want to use them, choose this option. You will then
    be asked to choose the mount points associated with each of the partitions.
    The legacy mount points are selected by default, and for the most part it's
    a good idea to keep them.
    
     * "%s". If Microsoft Windows is installed on your hard drive and takes
    all the space available on it, you will have to create free space for
    GNU/Linux. To do so, you can delete your Microsoft Windows partition and
    data (see ``Erase entire disk'' solution) or resize your Microsoft Windows
    FAT or NTFS partition. Resizing can be performed without the loss of any
    data, provided you've previously defragmented the Windows partition.
    Backing up your data is strongly recommended. Using this option is
    recommended if you want to use both Mandrakelinux and Microsoft Windows on
    the same computer.
    
       Before choosing this option, please understand that after this
    procedure, the size of your Microsoft Windows partition will be smaller
    than when you started. You'll have less free space under Microsoft Windows
    to store your data or to install new software.
    
     * "%s". If you want to delete all data and all partitions present on
    your hard drive and replace them with your new Mandrakelinux system, choose
    this option. Be careful, because you will not be able to undo this operation
    after you confirm.
    
       !! If you choose this option, all data on your disk will be deleted. !!
    
     * "%s". This option appears when the hard drive is entirely taken by
    Microsoft Windows. Choosing this option will simply erase everything on the
    drive and begin fresh, partitioning everything from scratch.
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "%s". Choose this option if you want to manually partition your hard
    drive. Be careful -- it is a powerful but dangerous choice and you can very
    easily lose all your data. That's why this option is really only
    recommended if you have done something like this before and have some
    experience. For more instructions on how to use the DiskDrake utility,
    refer to the ``Managing Your Partitions'' section in the ``Starter Guide''.
mt: F'dan il-punt int trid tagħżel fejn, fuq il-ħard disk, trid tinstalla s-
    sistema operattiva Mandrakelinux. Jekk il-ħard disk huwa vojt, jew jekk
    hemm sistema operattiva qed tokkupaha kollha, l-ewwel trid toħloq 
    partizzjonijiet. Bażikament, il-partizzjonijiet tal-ħard disk jaqsmu d-diska
    f'partijiet biex ikun hemm sezzjonijiet fejn tiġi nstallata s-sistema ġdida
    Mandrakelinux.
    
    Peress li l-effett ta' partizzjonament tal-ħard disk m'humiex riversibbli,
    u jista' jwassal għal telf ta' informazzjoni, dan il-proċess jista' jidher
     intimidanti jekk m'għandekx esperjenza. Fortunatament, hemm "saħħar" li jissimplifika l-proċess kollu. Qabel tibda', aqra sew din is-sezzjoni u ħu 
    l-ħin tiegħek. Skond il-konfigurazzjoni tal-ħard disk tiegħek, jista' jkollok
    diversi għażliet:
    
     * "%s": Din l-għażla toħloq partizzjonijiet awtomatikament.
    Jekk tuża din l-għażla ma tintalabx iżjed informazzjoni.
    
     * "%s": Is-saħħar sab partizzjoni waħda jew iżjed
    tal-Linux fuq il-ħard disk. Jekk trid tuża lilhom, agħżel din. 
    Int tiġi mistoqsi fejn trid timmonta dawn il-partizzjonijiet. 
    L-għażliet antiki jingħażlu impliċitament, u ġeneralment hija
    ideja tajba żżomm lilhom.
     * "%s": Jekk għandek Microsoft Windows installat fuq il-ħard disk 
    u qed jokkupa l-ispazju kollu, trid toħloq ftit spazju għal-Linux. 
    Biex tagħmel dan, trid jew tħassar il-partizzjoni tal-Windows
    u kull m'hemm fiha (ara "Ħassar id-diska sħiħa"), jew iċċekken 
    il-partizzjoni FAT jew NTFS tal-Windows. Tista' ċċekken il-partizzjoni 
    Windows mingħajr ma titlef informazzjoni sakemm għamilt "defragment" fuq
    id-diska minn qabel. Din is-soluzzjoni hija rakkomandata biex tuża l-Windows 
    u l-Linux flimkien fuq l-istess kompjuter.
    
       Qabel tagħżel din l-għażla, kun af li wara din il-proċedura, il-
    partizzjoni tal-Windows tkun iżgħar milli hi bħalissa. Ikollok inqas spazju taħt
    il-Microsoft Windows fejn iżżomm informazzjoni jew tinstalla programmi ġodda.
    
     * "%s": Jekk tixtieq tħassar l-informazzjoni kollha u
    l-partizzjonijiet kollha li għandek fuq il-ħard disk u tpoġġi l-Mandrake Linux
    minflokhom, tista' tagħżel din. Oqgħod attent minn din l-għażla għax ma tkunx
    tista' tibdel fehemtek wara li tikkonferma.
    
       !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!
    
     * "%s": Din l-għażla tidher meta l-ħard disk hija kompletament okkupata 
    mill-Microsoft Windows. Din l-għażla sempliċiment tħassar kull ma' hemm fuq 
    il-ħard disk u tibda' kollox mill-ġdid.
    
       !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!
    
     * "%s": Agħżel dan jekk trid tippartizzjona l-ħard disk 
    manwalment. Oqgħod attent - hija għażla li tagħti kontroll imma hija 
    perikoluża. Tista' faċilment titlef l-informazzjoni kollha b'dan il-mod. 
    Għalhekk, tużax din l-għażla jekk ma tafx x'qed tagħmel. Għal iżjed tagħrif
    dwar kif tuża l-għodda DiskDrake, irreferi għas-sezzjoni "Managing Your 
    Partitions" fil-manwal "Starter Guide".

en: Use free space
mt: Uża l-ispazju vojt

en: Use existing partition
mt: Uża partizzjoni eżistenti

en: Use the free space on the Windows partition
mt: Uża l-ispazju vojt fil-partizzjoni tal-Windows

en: Erase entire disk
mt: Ħassar kull m'hemm fid-diska

en: Remove Windows
mt: Neħħi l-Windows

en: Custom disk partitioning
mt: Partizzjonament personalizzat

en: There you are. Installation is now complete and your GNU/Linux system is
    ready to be used. Just click on "%s" to reboot the system. Do not forget
    to remove the installation media (CD-ROM or floppy). The first thing you
    should see after your computer has finished doing its hardware tests is the
    boot-loader menu, giving you the choice of which operating system to start.
    
    The "%s" button shows two more buttons to:
    
     * "%s": enables you to create an installation floppy disk which will
    automatically perform a whole installation without the help of an operator,
    similar to the installation you've just configured.
    
       Note that two different options are available after clicking on that
    button:
    
        * "%s". This is a partially automated installation. The partitioning
    step is the only interactive procedure.
    
        * "%s". Fully automated installation: the hard disk is completely
    rewritten, all data is lost.
    
       This feature is very handy when installing on a number of similar
    machines. See the Auto install section on our web site for more
    information.
    
     * "%s"(*): saves a list of the packages selected in this installation.
    To use this selection with another installation, insert the floppy and
    start the installation. At the prompt, press the [F1] key, type >>linux
    defcfg="floppy"<< and press the [Enter] key.
    
    (*) You need a FAT-formatted floppy. To create one under GNU/Linux, type
    "mformat a:", or "fdformat /dev/fd0" followed by "mkfs.vfat
    /dev/fd0".
mt: Dak kollox! L-installazzjoni issa hija lesta u s-sistema GNU/Linux issa
    lesta biex tintuża. Agħfas "%s" biex tirristartja l-kompjuter. Tinsiex tneħħi l-media ta' l-installazzjoni (CDROM jew flopi). L-ewwel ħaġa li 
    għandek tara meta l-kompjuter ilesti l-iċċekkjar tal-ħardwer huwa menu
    tal-bidu, li jagħtik l-opportunità tagħżel liema sistema operattiva trid
    ittella'.
    
    Il-buttuna "%s" turik żewġ buttuni oħra:
    
     * "%s": toħloqlok flopi li tippermettilek tirrepeti l-istess 
    installazzjoni fuq kompjuter ieħor identiku, mingħajr l-intervent 
    tiegħek.
    
       Innota li meta tagħfas din il-buttuna jintwerew żewġ għażliet oħra:
    
        * "%s". Din hija installazzjoni semi-awtomatika, għax il-pass ta'
    partizzjonament (u dak biss) jibqa' manwali.
    
        * "%s". Installazzjoni totalment awtomatika - il-ħard disk
    titħassar u tinkiteb mill-ġdid, u kull informazzjoni fuqha tintilef.
    
       Din il-faċilità hija utli meta qed tinstalla numru kbir ta' kompjuters
    identiċi. Ara s-sezzjoni "Auto install" fuq il-websajt tagħna.
    
      * "%s"(*): jikteb l-għażla ta' pakketti li
    nstallajt. Meta qed tagħmel installazzjoni oħra, daħħal il-flopi fid-drajv
    u meta tibda l-installazzjoni, agħfas [F1], ittajpja 
    >>linux defcfg="floppy"<< u agħfas it-tast [Enter].
    
    (*) Għandek bżonn flopi formattjata FAT (DOS). Biex toħloq waħda mil-Linux,
    ittajpja "mformat a:", jew "fdformat /dev/fd0" u "mkfs.vfat
    /dev/fd0".

en: Generate auto-install floppy
mt: Oħloq flopi awto-installazzjoni

en: Automated
mt: Awtomatizzata

en: Save packages selection
mt: Ikteb l-għażla ta' pakketti

en: If you chose to reuse some legacy GNU/Linux partitions, you may wish to
    reformat some of them and erase any data they contain. To do so, please
    select those partitions as well.
    
    Please note that it's not necessary to reformat all pre-existing
    partitions. You must reformat the partitions containing the operating
    system (such as "/", "/usr" or "/var") but you do not have to reformat
    partitions containing data that you wish to keep (typically "/home").
    
    Please be careful when selecting partitions. After the formatting is
    completed, all data on the selected partitions will be deleted and you
    will not be able to recover it.
    
    Click on "%s" when you're ready to format the partitions.
    
    Click on "%s" if you want to choose another partition for your new
    Mandrakelinux operating system installation.
    
    Click on "%s" if you wish to select partitions which will be checked for
    bad blocks on the disk.
mt: Jekk tagħżel li terġa' tuża xi partizzjonijiet antiki GNU/Linux, tista'
    tiddeċiedi li terġa' tifformattja wħud minnhom u tħassar l-informazzjoni
    kollha li fihom. F'dak il-każ, agħżel dawk il-partizzjonijiet ukoll.
    Innota li mhux meħtieġ li terġa' tifformattja l-partizzjonijiet kollha
    eżistenti. Trid però tifformattja dawk il-partizzjonijiet li jkollhom is-
    sistema operattiva fuqhom (eż, "/", "/usr" jew "/opt"), imma m'għandekx
    bżonn tifformattja dawk li fihom l-informazzjoni tiegħek (tipikament "/home").
    
    Oqgħod attent meta tagħżel il-partizzjonijiet. Wara li jiġu formattjati,
    l-informazzjoni kollha li kien hemm fuqhom tintilef u m'hemmx mod biex iġġibha
    lura.
    
    Agħfas "%s" meta tkun lest biex tifformattja l-partizzjonijiet.
    
    Agħfas "%s" jekk trid tagħżel partizzjoni oħra għas-sistema ġdida
    Mandrakelinux.
    
    Agħfas "%s" biex tagħżel partizzjonijiet biex jiġu ċċekkjati għal blokki
    ħżiena fuq id-diska.

en: Previous
mt: Ta' qabel

en: By the time you install Mandrakelinux, it's likely that some packages will
    have been updated since the initial release. Bugs may have been fixed,
    security issues resolved. To allow you to benefit from these updates,
    you're now able to download them from the Internet. Check "%s" if you
    have a working Internet connection, or "%s" if you prefer to install
    updated packages later.
    
    Choosing "%s" will display a list of web locations from which updates can
    be retrieved. You should choose one near to you. A package-selection tree
    will appear: review the selection, and press "%s" to retrieve and install
    the selected package(s), or "%s" to abort.
mt: Fid-data meta tinstalla l-Mandrakelinux, aktarx ikunu ġew aġġornati xi
    pakketti minn meta ġiet pubblikata. Xi żbalji jistgħu ikunu ġew irranġati,
    u problemi ta' sigurtà ġew riżolti. Sabiex tibbenifika minn dawn l-
    aġġornamenti, jaqbillek tniżżilhom minn fuq l-internet. Agħżel "%s" jekk
    għandek konnessjoni mal-internet issettjata, jew "%s" jekk tippreferi li
    tinstalla l-aġġornamenti iżjed tard.
    
    Jekk tagħżel %s, tintwera lista ta' postijiet minn fejn l-aġġornamenti 
    jistgħu jitniżżlu ("mirja"). Agħżel l-iżjed wieħed viċin tiegħek. Imbagħad
    tintwera lista ta' pakketti. Dur dawn il-pakketti, agħżel liema trid u 
    agħfas "%s" biex tniżżilhom u tinstallahom jew "%s" biex twaqqaf.

en: Install
mt: Installa

en: At this point, DrakX will allow you to choose the security level you desire
    for your machine. As a rule of thumb, the security level should be set
    higher if the machine is to contain crucial data, or if it's to be directly
    exposed to the Internet. The trade-off that a higher security level is
    generally obtained at the expense of ease of use.
    
    If you do not know what to choose, keep the default option. You'll be able
    to change it later with the draksec tool, which is part of Mandrakelinux
    Control Center.
    
    Fill the "%s" field with the e-mail address of the person responsible for
    security. Security messages will be sent to that address.
mt: F'dan il-punt, trid tagħżel livell ta' sigurtà għal dan il-kompjuter.
    Bħala regola ġenerali, iżjed m'hu espost il-kompjuter, u iżjed m'hi kruċjali
    l-informazzjoni ta' fuqu, iżjed irid ikun għoli l-livell ta' sigurtà. Innota li
    livell ta' sigurtà iżjed għoli ġeneralment ifisser iżjed diffikultà fl-użu.
    
    Jekk ma tafx liema tagħżel, żomm l-għażla impliċita. Tkun tista' tibdel dan
    il-livell iżjed 'il quddiem bl-għodda draksex, li jifforma parti miċ-Ċentru
    ta' Kontroll Mandrakelinux.
    
    Imla' l-kaxxa "%s" bl-indirizz tal-imejl tal-persuna responsabbli mis-sigurtà.
    Il-messaġġi ta' sigurtà jintbagħtu lil dak l-indirizz.

en: Security Administrator
mt: Amministratur tas-sigurtà

en: At this point, you need to choose which partition(s) will be used for the
    installation of your Mandrakelinux system. If partitions have already been
    defined, either from a previous installation of GNU/Linux or by another
    partitioning tool, you can use existing partitions. Otherwise, hard drive
    partitions must be defined.
    
    To create partitions, you must first select a hard drive. You can select
    the disk for partitioning by clicking on ``hda'' for the first IDE drive,
    ``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
    
    To partition the selected hard drive, you can use these options:
    
     * "%s": this option deletes all partitions on the selected hard drive
    
     * "%s": this option enables you to automatically create ext3 and swap
    partitions in the free space of your hard drive
    
    "%s": gives access to additional features:
    
     * "%s": saves the partition table to a floppy. Useful for later
    partition-table recovery if necessary. It is strongly recommended that you
    perform this step.
    
     * "%s": allows you to restore a previously saved partition table from a
    floppy disk.
    
     * "%s": if your partition table is damaged, you can try to recover it
    using this option. Please be careful and remember that it does not always
    work.
    
     * "%s": discards all changes and reloads the partition table that was
    originally on the hard drive.
    
     * "%s": un-checking this option will force users to manually mount and
    unmount removable media such as floppies and CD-ROMs.
    
     * "%s": use this option if you wish to use a wizard to partition your
    hard drive. This is recommended if you do not have a good understanding of
    partitioning.
    
     * "%s": use this option to cancel your changes.
    
     * "%s": allows additional actions on partitions (type, options, format)
    and gives more information about the hard drive.
    
     * "%s": when you are finished partitioning your hard drive, this will
    save your changes back to disk.
    
    When defining the size of a partition, you can finely set the partition
    size by using the Arrow keys of your keyboard.
    
    Note: you can reach any option using the keyboard. Navigate through the
    partitions using [Tab] and the [Up/Down] arrows.
    
    When a partition is selected, you can use:
    
     * Ctrl-c to create a new partition (when an empty partition is selected)
    
     * Ctrl-d to delete a partition
    
     * Ctrl-m to set the mount point
    
    To get information about the different file system types available, please
    read the ext2FS chapter from the ``Reference Manual''.
    
    If you are installing on a PPC machine, you will want to create a small HFS
    ``bootstrap'' partition of at least 1MB which will be used by the yaboot
    bootloader. If you opt to make the partition a bit larger, say 50MB, you
    may find it a useful place to store a spare kernel and ramdisk images for
    emergency boot situations.
mt: F'dan il-punt trid tagħżel liema partizzjoni(jiet) se jintużaw għall-
    installazzjoni tas-sistema Mandrakelinux. Jekk diġà ġew definiti xi
    partizzjonijiet, jew minn installazzjoni preċedenti ta' GNU/Linux jew minn
    għodda ta' partizzjonament oħra, tista' tuża l-partizzjonijiet eżistenti.
    Altrimenti, l-partizzjonijiet tal-ħard disk iridu jiġu definiti.
    
    Biex toħloq il-partizzjonijiet, l-ewwel trid tagħżel ħard disk.
    Tista' tagħżel diska għall-partizzjonament billi tagħżel "hda" għal l-
    ewwel diska IDE, "hdb" għat-tieni, eċċ, jew "sda" għal l-ewwel
    diska SCSI, eċċ.
    
    Biex tippartizzjona l-ħard disk magħżula għandek dawn l-għażliet:
    
     * "%s": din l-għażla tħassar il-partizzjonijiet kollha
    mill-ħard disk magħżula.
    
     * "%s": din l-għażla awtomatikament toħloqlok partizzjonijiet
    ext3 u swap fl-ispazju vojt tad-diska.
    
     * "%s" jagħtik aċċess għal iżjed faċilitajiet:
    
     * "%s": jikteb it-tabella 
    tal-partizzjonijiet fuq flopi. Utli biex tirkupra t-tabella iżjed tard jekk
    hemm bżonn. Dan il-pass huwa rakkomandat.
    
     * "%s": tħallik tirrestawra t-
    tabella tal-partizzjonijiet minn flopi disk fejn ġew miktuba.
    
     * "%s": jekk it-tabella tal-partizzjonijiet
    ġiet korrotta b'xi mod, din l-għażla tħallik tipprova terġa' tirkupraha. 
    Oqgħod attent b'din l-għażla u ftakar li mhux dejjem taħdem.
    
     * "%s": jinsa l-bidliet kollha u jerġa' jaqra t-tabella
    mill-ħard disk.
    
     * "%s": jekk tneħħi din l-għażla l-utenti
    jkollhom jimmontaw u jiżmuntaw manwalment diski li jinħarġu bħal flopi u CDROM.
    
     * "%s": uża dan il-metodu jekk trid tuża saħħar li jippartizzjonalek
    il-ħard disk. Dan huwa rakkomandat jekk ma tifhimx sew kif tagħmel il-
    partizzjonijiet int.
    
     * "%s": uża din l-għażla biex tikkanċella l-bidliet li għamilt.
    
     * "%s": jagħtik iżjed azzjonijiet fuq il-
    partizzjonijiet (tip, għażliet, format) u jagħti iżjed dettalji.
    
     * "%s": meta tlesti mill-partizzjonament, dan jikteb il-bidliet li
    għamilt lid-diska.
    
    Meta tiddefinixxi d-daqs tal-partizzjoni, tista' tissettja d-daqs bl-eżatt
    billi tuża l-vleġeġ tat-tastiera.
    
    Nota: tista' tilħaq kull għażla mit-tastiera. Dur il-partizzjonijiet bit-TAB
    u l-vleġeġ 'il fuq u 'l isfel.
    
    Meta tkun fuq il-partizzjoni li trid, tista' tuża:
    
     * Ctrl-C biex toħloq partizzjoni (meta tkun magħżula partizzjoni vojta)
    
     * Ctrl-D biex tħassar partizzjoni
    
     * Ctrl-M biex tissettja l-punt ta' mmuntar.
    
    Biex tikseb iżjed informazzjoni dwar il-filesystems differenti disponibbli,
    jekk jogħġbok aqra l-kapitlu ext2fs fil-Manwal ta' Referenza.
    
    Jekk qed tinstalla fuq kompjuter PPC, tkun trid toħloq partizzjoni żgħira
    HFS "bootstrap", ta' l-inqas 1MB, li tintuża mill-bootloader yaboot. Jekk
    tiddeċiedi li tagħmlu ftit ikbar, ngħidu aħna 50MB, tista' ssibu post utli
    fejn tqiegħed kernel u ramdisk "spare" għal emerġenzi.

en: Removable media auto-mounting
mt: Awtomuntar ta' diski li jinħarġu

en: Toggle between normal/expert mode
mt: Aqleb bejn modalità normali u esperta

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose the one which you want to resize in order to install your new
    Mandrakelinux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
mt: Instabu iżjed minn partizzjoni waħda tal-Microsoft fuq il-ħard disk. Jekk 
    jogħġbok agħżel liema minnhom trid iċċekken biex tinstalla s-sistema 
    operattiva Mandrakelinux.
    
    Kull partizzjoni hija mmarkata hekk: "Isem tal-Linux", "Isem fil-Windows",
    "Daqs".
    
    L-isem tal-Linux huwa mqassam hekk: "tip ta' diska", "numru ta' diska", 
    "numru tal-partizzjoni" (per eżempju, "hda1"). 
    
    It-tip ta' diska huwa "hd" jekk id-diska hija tip IDE, u "sd" jekk hija 
    tip SCSI.
    
    In-numru tad-diska huwa l-ittra ta' wara "hd" jew "sd". Għal diski IDE:
    
     * "a" hija d-diska "master" fuq il-kontrollatur IDE primarju,
    
     * "b" hija d-diska skjav fuq il-kontrollatur IDE primarju,
    
     * "c" hija d-diska "master" fuq il-kontrollatur IDE sekondarju,
    
     * "d" hija d-diska skjav fuq il-kontrollatur IDE sekondarju
    
    Fuq diski SCSI, "a" hija d-diska bl-iżjed ID baxx, "b" hija t-tieni, eċċ.
    
    "Isem tal-Windows" huwa l-ittra li jkollha din il-ħard disk taħt il-Windows
    (l-ewwel diska jew partizzjoni hija "C:").

en: "%s": check the current country selection. If you're not in this country,
    click on the "%s" button and choose another. If your country is not in the
    list shown, click on the "%s" button to get the complete country list.
mt: "%s": iċċekkja l-għażla ta' pajjiż kurrenti. Jekk m'intix f'dan il-
    pajjiż, agħfas il-buttuna "%s" u agħżel ieħor. Jekk pajjiżek ma jidhirx
    fil-lista' agħfas il-buttuna "%s" għal lista sħiħa ta' pajjiżi.

en: This step is activated only if an existing GNU/Linux partition has been
    found on your machine.
    
    DrakX now needs to know if you want to perform a new installation or an
    upgrade of an existing Mandrakelinux system:
    
     * "%s". For the most part, this completely wipes out the old system.
    However, depending on your partitioning scheme, you can prevent some of
    your existing data (notably "home" directories) from being over-written.
    If you wish to change how your hard drives are partitioned, or to change
    the file system, you should use this option.
    
     * "%s". This installation class allows you to update the packages
    currently installed on your Mandrakelinux system. Your current partitioning
    scheme and user data will not be altered. Most of the other configuration
    steps remain available and are similar to a standard installation.
    
    Using the ``Upgrade'' option should work fine on Mandrakelinux systems
    running version "8.1" or later. Performing an upgrade on versions prior
    to Mandrakelinux version "8.1" is not recommended.
mt: Dan il-pass jiġi attivat biss jekk instabet partizzjoni eżistenti GNU/Linux
    fuq il-kompjuter.
    
    DrakX issa għandu bżonn ikun jaf jekk tridx tagħmel installazzjoni ġdida
    jew aġġornament tas-sistema eżistenti Mandrakelinux:
    
     * "%s". Fil-parti l-kbira, din tħassar is-sistema antika għal kollox.
    Però, skond l-iskema ta' partizzjonijiet, tista' ma tħallix ċerti 
    partizzjonijiet jitħassru (speċjalment id-direttorji "home"). Jekk trid
    tibdel kif jiġu partizzjonati l-ħard disks, jew biex tibdel is-sistema ta'
    fajls, għandek tagħżel din l-għażla.
    
     * "%s". Din il-klassi ta' installazzjoni tħallik taġġorna l-pakketti
    installati bħalissa fuq is-sistema Mandrakelinux. Il-partizzjonijiet eżistenti
    u d-data tal-utenti ma jintmessux. Ħafna mill-passi l-oħra tal-konfigurazzjoni
    jibqgħu disponibbli u huma simili għal installazzjoni normali.
    
    L-użu tal-għażla "Aġġorna" għandha taħdem tajjeb fuq sistemi Mandrakelinux
    minn verżjoni "8.1" 'il fuq. Mhux rakkomandat li tagħmel aġġornament ta'
    sistema Mandrakelinux qabel 8.1.

en: Depending on the language you chose (), DrakX will automatically select a
    particular type of keyboard configuration. Check that the selection suits
    you or choose another keyboard layout.
    
    Also, you may not have a keyboard which corresponds exactly to your
    language: for example, if you are an English-speaking Swiss native, you may
    have a Swiss keyboard. Or if you speak English and are located in Quebec,
    you may find yourself in the same situation where your native language and
    country-set keyboard do not match. In either case, this installation step
    will allow you to select an appropriate keyboard from a list.
    
    Click on the "%s" button to be shown a list of supported keyboards.
    
    If you choose a keyboard layout based on a non-Latin alphabet, the next
    dialog will allow you to choose the key binding which will switch the
    keyboard between the Latin and non-Latin layouts.
mt: Skond liema lingwa għażilt (), DrakX awtomatikament jagħżel 
    tqassim tat-tastiera. Iċċekkja li din l-għażlia hija tajba, jew
    għażel tastiera oħra.
    
    Apparti minn hekk, jista' jkun li t-tastiera magħżula ma taqbilx mal-
    lingwa tiegħek. Jekk per eżempju int Malti imma tgħix fl-Italja jista'
    jkun ikollok tastiera Taljana. F'dak il-każ dan il-pass iħallik
    tagħżel t-tastiera tajba mil-lista.
    
    Klikkja l-buttuna "%s" biex tara lista sħiħa ta' tastieri sapportiti.
    
    Jekk tagħżel tastiera ibbażata fuq alfabett mhux Latin, il-pass li jmiss
    iħallik tagħżel il-kombinazzjoni ta' tasti li jibdlu bejn tqassim Latin
    u mhux Latin.

en: The first step is to choose your preferred language.
    
    Your choice of preferred language will affect the installer, the
    documentation, and the system in general. First select the region you're
    located in, then the language you speak.
    
    Clicking on the "%s" button will allow you to select other languages to
    be installed on your workstation, thereby installing the language-specific
    files for system documentation and applications. For example, if Spanish
    users are to use your machine, select English as the default language in
    the tree view and "%s" in the Advanced section.
    
    About UTF-8 (unicode) support: Unicode is a new character encoding meant to
    cover all existing languages. However full support for it in GNU/Linux is
    still under development. For that reason, Mandrakelinux's use of UTF-8 will
    depend on the user's choices:
    
     * If you choose a language with a strong legacy encoding (latin1
    languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most
    iso-8859-2 languages), the legacy encoding will be used by default;
    
     * Other languages will use unicode by default;
    
     * If two or more languages are required, and those languages are not using
    the same encoding, then unicode will be used for the whole system;
    
     * Finally, unicode can also be forced for use throughout the system at a
    user's request by selecting the "%s" option independently of which
    languages were been chosen.
    
    Note that you're not limited to choosing a single additional language. You
    may choose several, or even install them all by selecting the "%s" box.
    Selecting support for a language means translations, fonts, spell checkers,
    etc. will also be installed for that language.
    
    To switch between the various languages installed on your system, you can
    launch the "localedrake" command as "root" to change the language used
    by the entire system. Running the command as a regular user will only
    change the language settings for that particular user.
mt: L-ewwel pass huwa li tagħżel il-lingwa preferuta tiegħek.
    
    L-għażla tal-lingwa preferuta jaffettwa l-installatur, id-dokumentazzjoni,
    u s-sisetma in ġenerali. L-ewwel agħżel ir-reġjun fejn qiegħed, u mbgħad
    il-lingwa li titkellem.
    Jekk tagħfas il-buttuna "%s" tista' tagħżel lingwi oħra li tixtieq 
    tinstalla fuq is-sistema. Jekk tagħżel lingwi oħra, il-fajls speċifiċi għal 
    dik il-lingwa jiġu nstallati fuq is-sistema. Per eżempju, jekk se jkun hemm
    utenti Spanjoli fuq il-kompjuter, agħżel l-Ingliż bħala lingwa ewlenija fil-
    lista ta' fuq, u "%s" fis-sezzjoni avvanzata.
    Dwar sapport għall--UTF-8 (unicode): Unicode hija sistema ġdida ta' kodifika
    tal-karattri intenzjonata biex tipprovdi sapport għal-lingwi kollha. Però 
    s-sapport għaliha fil-Linux għadu qed jiġi żviluppat. Għalhekk, l-użu tal-UTF-8
    fil-Mandrakelinux jiddependi mill-għażla tal-utent:
    
    * Jekk tagħżel lingwa b'ħafna sapport eżistenti f'kodifika oħra (eż, lingwi 
    latin1, Russu, Ġappuniz, Ċiniż, Korean, Tajlandiż, Grieg, Tork u ħafna lingwi
    latin2), tintuża l-kodifika antika.
    
    Lingwi oħra jużaw unicode impliċitament;
    
     * Jekk tnejn jew iżjed lingwi huma meħtieġa, u dawn m'għandhomx l-istess 
    kodifika, jintuża unicode fuq is-sistema kollha.
    
     * Finalment, tista' ġġiegħel li jintuża unicode fis-sistema kollha billi 
    tittikkja l-għażla "%s" indipendentement minn liema lingwi huma magħżula.
    
    Innota li m'intix limitat li tagħżel lingwa waħda addizzjonali. Tista' tagħżel
    diversi, jew anke tinstalla kollox billi tagħżel il-kaxxa "%s". Li tagħżel 
    lingwa ifisser traduzzjonijiet, fonts, spell checkers eċċ jiġu nstallati għal 
    dik il-lingwa.

en: Usually, DrakX has no problems detecting the number of buttons on your
    mouse. If it does, it assumes you have a two-button mouse and will
    configure it for third-button emulation. The third-button mouse button of a
    two-button mouse can be obtained by simultaneously clicking the left and
    right mouse buttons. DrakX will automatically know whether your mouse uses
    a PS/2, serial or USB interface.
    
    If you have a 3-button mouse without a wheel, you can choose a "%s"
    mouse. DrakX will then configure your mouse so that you can simulate the
    wheel with it: to do so, press the middle button and move your mouse
    pointer up and down.
    
    If for some reason you wish to specify a different type of mouse, select it
    from the list provided.
    
    You can select the "%s" entry to chose a ``generic'' mouse type which
    will work with nearly all mice.
    
    If you choose a mouse other than the default one, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct and that the mouse is working correctly. If the mouse is not
    working well, press the space bar or [Return] key to cancel the test and
    you will be returned to the mouse list.
    
    Occasionally wheel mice are not detected automatically, so you will need to
    select your mouse from a list. Be sure to select the one corresponding to
    the port that your mouse is attached to. After selecting a mouse and
    pressing the "%s" button, a mouse image will be displayed on-screen.
    Scroll the mouse wheel to ensure that it is activating correctly. As you
    scroll your mouse wheel, you will see the on-screen scroll wheel moving.
    Test the buttons and check that the mouse pointer moves on-screen as you
    move your mouse about.
mt: Normalment, DrakX ma jsibx problemi biex jinduna kemm għandu buttuni
    l-maws. Jekk ikollu, huwa jassumi li għandek maws b'żewġ buttuni u jissettjah
    għall-emulazzjoni tat-tielet buttuna. It-tielet buttuna f'dan il-każ tfisser 
    li tagħfas iż-żewġ buttuni l-oħrajn flimkien. DrakX kapaċi jinduna waħdu jekk 
    il-maws huwiex PS/2, serjali jew USB.
    
    Jekk għandek maws bi 3 buttuni mingħajr rota, tista' tagħżel il-maws "%s". 
    DrakX jissettjalek il-maws biex tista' tissimula r-rota: biex tagħmel dan,
    żomm il-buttuna tan-nofs magħfusa u mexxi l-maws 'il fuq u 'l isfel.
    
    Jekk tixtieq tispeċifika tip ta' maws differenti, agħżel it-tip tajjeb mil-
    lista provduta.
    
    Tista' tagħżel "%s" sabiex tuża tip ġeneriku li jaħdem kważi mal-mawsijiet
    kollha.
    
    Jekk tagħżel tip ta' maws differenti mill-oriġinali, tiġi provduta faċilità
    biex tittestja s-setings. Uża l-buttuni kollha u r-rota biex tivverifika li s-
    setings jaħdmu sew. Jekk il-maws ma jaħdimx sew agħfas "spazju" jew
    [Enter] biex tikkanċella t-test u tagħżel maws ieħor.
    
    Maws bir-rota ġieli ma jiġix magħruf sew awtomatikament, għalhekk ikollok
    tagħżel it-tip minn lista. Ara li tagħżel dak li jikkorrispondi mal-port fejn huwa
    mqabbad il-maws. Wara li tagħżel maws u tagħfas il-buttuna "%s", tittella'
    stampa ta' maws. Mexxi r-rota biex tiżgura li din tiġi ssettjata sew. Meta tara
    r-rota fuq l-iskrin timxi meta ċċaqlaq ir-rota fuq il-maws, iċċekkja li l-buttuni 
    jaħdmu u li l-vleġġa fuq l-iskrin timxi meta ċċaqlaq il-maws.

en: with Wheel emulation
mt: b' emulazzjoni tar-rota

en: Universal | Any PS/2 & USB mice
mt: Universali | Kwalunkwe maws PS/2 jew USB

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
mt: Jekk jogħġbok agħżel il-port it-tajjeb. Per eżempju, il-port "COM1" fil-
    Windows huwa ekwivalenti għal "ttyS0" fil-GNU/Linux.

en: This is the most crucial decision point for the security of your GNU/Linux
    system: you must enter the "root" password. "Root" is the system
    administrator and is the only user authorized to make updates, add users,
    change the overall system configuration, and so on. In short, "root" can
    do everything! That's why you must choose a password which is difficult to
    guess: DrakX will tell you if the password you chose is too simple. As you
    can see, you're not forced to enter a password, but we strongly advise
    against this. GNU/Linux is just as prone to operator error as any other
    operating system. Since "root" can overcome all limitations and
    unintentionally erase all data on partitions by carelessly accessing the
    partitions themselves, it is important that it be difficult to become
    "root".
    
    The password should be a mixture of alphanumeric characters and at least 8
    characters long. Never write down the "root" password -- it makes it far
    too easy to compromise your system.
    
    One caveat: do not make the password too long or too complicated because you
    must be able to remember it!
    
    The password will not be displayed on screen as you type it. To reduce the
    chance of a blind typing error you'll need to enter the password twice. If
    you do happen to make the same typing error twice, you'll have to use this
    ``incorrect'' password the first time you'll try to connect as "root".
    
    If you want an authentication server to control access to your computer,
    click on the "%s" button.
    
    If your network uses either LDAP, NIS, or PDC Windows Domain authentication
    services, select the appropriate one for "%s". If you do not know which
    one to use, you should ask your network administrator.
    
    If you happen to have problems with remembering passwords, or if your
    computer will never be connected to the Internet and you absolutely trust
    everybody who uses your computer, you can choose to have "%s".
mt: Dan huwa punt ta' deċiżjoni kruċjali għas-sigurtà tas-sistema GNU/Linux
    tiegħek: trid tagħżel password għal "root". "root" huwa l-utent li
    jintuża bħala amministratur tas-sistema, u huwa l-uniku user awtorizzat
    li jaġġorna s-sistema, iżid utenti, jibdel il-konfigurazzjoni. eċċ. Fi kliem
    ieħor, "root" kapaċi jagħmel kollox! Għalhekk huwa importanti li tagħżel
    password li diffiċli biex taqtagħha: DrakX iwissik jekk tagħżel waħda faċli
    wisq. Kif tista' tinduna, huwa anke possibbli li ma ddaħħal xejn bħala password,
    imma dan huwa perikoluż ĦAFNA u aħna ma nirrikmandawh qatt. Peress li "root"
    jista' jegħleb kull limitazzjoni, saħansitra jħassar l-informazzjoni u 
    partizzjonijiet kollha, huwa mportanti li jkun diffiċli kemm jista' jkun li
    nies oħra jidħlu bħala "root".
    
    Il-password għandu jkun taħlita ta' ittri u numri, u ta' l-inqas twil 8 
    karattri. M'għandek qatt tikteb il-password ta' "root" x'inkien - dan 
    jagħmilha faċli wisq tikkomprometti s-sistema.
    
    Fl-istess ħin tagħmilx il-password twil jew kumplikata wisq għax int trid
    tkun kapaċi tiftakarha.
    
    Il-password mhux se jintwera fuq l-iskrin waqt li tittajpjah. Għalhekk trid
    tittajpjah darbtejn biex jonqos iċ-ċans li tagħmel żball waqt li tittajpja.
    Jekk tagħmel l-istess żball darbtejn, trid tittajpja l-password b'dan il-mod
    sakemm tibdlu.
    
    Jekk trid tuża server ta' awtentikazzjoni biex jikkontrolla l-aċċess għall-
    kompjuter, agħfas il-buttuna "%s".
    Jekk in-network tiegħek juża protokoll LDAP, NIS jew PDC tal-Windows
    għall-awtentikazzjoni, agħżel dak li jgħodd għal "%s". Jekk ma tafx, staqsi 
    lill-amministratur tan-network.
    
    Jekk għandek problema tiftakar il-passwords, jew jekk il-kompjuter qatt m'hu
    se jiġi mqabbad ma' l-internet u assolutament tafda lil kull min juża l-kompjuter,
    tista' tagħżel "%s".

en: authentication
mt: awtentikazzjoni

en: A boot loader is a little program which is started by the computer at boot
    time. It's responsible for starting up the whole system. Normally, the boot
    loader installation is totally automated. DrakX will analyze the disk boot
    sector and act according to what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a GRUB/LILO
    boot sector. This way you'll be able to load either GNU/Linux or any other
    OS installed on your machine.
    
     * if a GRUB or LILO boot sector is found, it'll replace it with a new one.
    
    If DrakX can not determine where to place the boot sector, it'll ask you
    where it should place it. Generally, the "%s" is the safest place.
    Choosing "%s" will not install any boot loader. Use this option only if you
    know what you're doing.
mt: Il-"boot loader" huwa programm żgħir li jiġi mħaddem mill-kompjuter meta
    tixgħelu. Huwa responsabbli li jtella' s-sistema sħiħa. Normalment, l-
    installazzjoni tal-boot loader huwa totalment awtomatizzat. DrakX janalizza 
    s-settur "boot" tad-diska u jaġixxi skond x'isib hemm:
    
     * Jekk isib settur "boot" tal-Windows, huwa jibdlu ma' settur boot ta' 
    grub/LILO. B'dan il-mod tista' ttella' kemm GNU/Linux jew xi sistema 
    operattiva oħra.
    
     * Jekk isib settur boot eżistenti ta' grub jew LILO, dan jibdlu mal-ġdida.
    
    Jekk ma jistax jiddetermina t-tip, DrakX jistaqsik fejn trid tpoġġi l-
    bootloader. Ġeneralment, l-aħjar huwa "%s". Jekk tagħżel "%s" ma jiġi 
    nstallat ebda boot loader. Din ta' l-aħħar għanda tintuża biss jekk taf sew
    x'qed tagħmel.

en: Now, it's time to select a printing system for your computer. Other
    operating systems may offer you one, but Mandrakelinux offers two. Each of
    the printing systems is best suited to particular types of configuration.
    
     * "%s" -- which is an acronym for ``print, do not queue'', is the choice
    if you have a direct connection to your printer, you want to be able to
    panic out of printer jams, and you do not have networked printers. ("%s"
    will handle only very simple network cases and is somewhat slow when used
    within networks.) It's recommended that you use "pdq" if this is your
    first experience with GNU/Linux.
    
     * "%s" stands for `` Common Unix Printing System'' and is an excellent
    choice for printing to your local printer or to one halfway around the
    planet. It's simple to configure and can act as a server or a client for
    the ancient "lpd" printing system, so it's compatible with older
    operating systems which may still need print services. While quite
    powerful, the basic setup is almost as easy as "pdq". If you need to
    emulate a "lpd" server, make sure you turn on the "cups-lpd" daemon.
    "%s" includes graphical front-ends for printing or choosing printer
    options and for managing the printer.
    
    If you make a choice now, and later find that you do not like your printing
    system you may change it by running PrinterDrake from the Mandrakelinux
    Control Center and clicking on the "%s" button.
mt: Issa wasal il-waqt li tagħżel sistema ta' printjar għall-kompjuter tiegħek.
    Sistemi operattivi oħra joffrulek waħda, Mandrakelinux jagħtik tnejn.
    Kull waħda minn dawn is-sistema hija idejali għal ċirkostanzi differenti.
     * "%s" - li jfisser "printja minngħajr kju", hija l-aħjar għażla
    jekk għandek konnessjoni diretta mal-printer, trid il-faċilità li twaqqaf
    printjar malajr, u m'għandekx printers bin-network ("%s" jaċċetta
    biss networking sempliċi, u mhux effiċjenti fuq network). Tista' tagħżel 
    "pdq" jekk din hija l-ewwel esperjenza tiegħek fuq GNU/Linux.
    
     * "%s""Sistema ta' Printjar Komuni tal-Linux" huwa eċċellenti
    kemm biex tipprintja fuq printer lokali kif ukoll fuq printer in-naħa l-oħra
    tad-dinja. Huwa sempliċi u jista' jaħdem kemm bħala server kif ukoll bħala
    klijent għal sistemi antiki "lpd", għalhekk huwa kompatibbli ma' sistemi
    antiki. Kapaċi jagħmel ħafna affarijiet, imma l-konfigurazzjoni bażika hija
    sempliċi kważi daqs "pdq". Biex jemula server "lpd", trid tħaddem is-
    servizz "cups-lpd". %s għandu interfaċċji grafiċi biex tipprintja jew
    tissettja l-għażliet tal-printer.
    
    Jekk tagħmel għażla issa, u wara tiskopri li ma togħġbokx din is-sistema,
    tista' tibdilha billi tħaddem PrinterDrake miċ-ċentru tal-kontroll ta' 
    Mandrakelinux u tikklikkja l-buttuna "%s".

en: Expert
mt: Espert

en: DrakX will first detect any IDE devices present in your computer. It will
    also scan for one or more PCI SCSI cards on your system. If a SCSI card is
    found, DrakX will automatically install the appropriate driver.
    
    Because hardware detection is not foolproof, DrakX may fail in detecting
    your hard drives. If so, you'll have to specify your hardware by hand.
    
    If you had to manually specify your PCI SCSI adapter, DrakX will ask if you
    want to configure options for it. You should allow DrakX to probe the
    hardware for the card-specific options which are needed to initialize the
    adapter. Most of the time, DrakX will get through this step without any
    issues.
    
    If DrakX is not able to probe for the options to automatically determine
    which parameters need to be passed to the hardware, you'll need to manually
    configure the driver.
mt: DrakX issa se jfittex apparat IDE fuq il-kompjuter tiegħek. Huwa wkoll
    ifittex kard waħda jew iżjed SCSI PCI fuq is-sistema. Jekk tinstab kard
    SCSI, DrakX awtomatikament jinstalla d-drajver għaliha.
    
    Peress li dan il-proċess mhux dejjem isib ċerti apparat, DrakX jista' ma
    jsibx il-ħard disks tiegħek. F'dak il-każ trid tissettja l-ħardwer manwalment.
    
    Jekk trid tissettja l-adattur SCSI manwalment, DrakX jistaqsik jekk tridx 
    tispeċifika għażliet għalih. Jaqbillek tħalli lill DrakX jeżamina l-ħardwer
    biex isir jaf liema għażliet għandu bżonn l-apparat biex jaħdem. Dan 
    normalment jaħdem sew.
    
    Jekk DrakX mhux kapaċi jagħraf l-għażliet li jridu jiġu mgħoddija, trid
    tispeċifikahom manwalment lid-drajver.

en: "%s": if a sound card is detected on your system, it'll be displayed
    here. If you notice the sound card is not the one actually present on your
    system, you can click on the button and choose a different driver.
mt: "%s": jekk tinstab kard ta' l-awdjo fuq is-sistema, tintwera hawn.
    Jekk tinduna li l-kard ta' l-awdjo murija mhix dik li għandek fis-sistema,
    tista' tikklikkja fuq il-buttuna u tagħżel drajver differenti.

en: Sound card
mt: Kard awdjo

en: As a review, DrakX will present a summary of information it has gathered
    about your system. Depending on the hardware installed on your machine, you
    may have some or all of the following entries. Each entry is made up of the
    hardware item to be configured, followed by a quick summary of the current
    configuration. Click on the corresponding "%s" button to make the change.
    
     * "%s": check the current keyboard map configuration and change it if
    necessary.
    
     * "%s": check the current country selection. If you're not in this
    country, click on the "%s" button and choose another. If your country
    is not in the list shown, click on the "%s" button to get the complete
    country list.
    
     * "%s": by default, DrakX deduces your time zone based on the country
    you have chosen. You can click on the "%s" button here if this is not
    correct.
    
     * "%s": verify the current mouse configuration and click on the button
    to change it if necessary.
    
     * "%s": clicking on the "%s" button will open the printer
    configuration wizard. Consult the corresponding chapter of the ``Starter
    Guide'' for more information on how to set up a new printer. The interface
    presented in our manual is similar to the one used during installation.
    
     * "%s": if a sound card is detected on your system, it'll be displayed
    here. If you notice the sound card is not the one actually present on your
    system, you can click on the button and choose a different driver.
    
     * "%s": if you have a TV card, this is where information about its
    configuration will be displayed. If you have a TV card and it is not
    detected, click on "%s" to try to configure it manually.
    
     * "%s": you can click on "%s" to change the parameters associated with
    the card if you feel the configuration is wrong.
    
     * "%s": by default, DrakX configures your graphical interface in
    "800x600" or "1024x768" resolution. If that does not suit you, click on
    "%s" to reconfigure your graphical interface.
    
     * "%s": if you wish to configure your Internet or local network access,
    you can do so now. Refer to the printed documentation or use the
    Mandrakelinux Control Center after the installation has finished to benefit
    from full in-line help.
    
     * "%s": allows to configure HTTP and FTP proxy addresses if the machine
    you're installing on is to be located behind a proxy server.
    
     * "%s": this entry allows you to redefine the security level as set in a
    previous step ().
    
     * "%s": if you plan to connect your machine to the Internet, it's a good
    idea to protect yourself from intrusions by setting up a firewall. Consult
    the corresponding section of the ``Starter Guide'' for details about
    firewall settings.
    
     * "%s": if you wish to change your bootloader configuration, click this
    button. This should be reserved to advanced users. Refer to the printed
    documentation or the in-line help about bootloader configuration in the
    Mandrakelinux Control Center.
    
     * "%s": through this entry you can fine tune which services will be run
    on your machine. If you plan to use this machine as a server it's a good
    idea to review this setup.
mt: Fit-tmiem, DrakX jippreżentalek sommarju ta' informazzjoni li ġabar dwar
    is-sistema. Skond il-ħardwer li hemm installat, jista' jkollok dawn l-
    elementi jew uħud minnhom. Kull element huwa magħmul mit-tagħmir li għandu
    jiġi konfigurat, u sommarju tal-konfigurazzjoni kurrenti. Klikkja fuq il-
    buttuna "%s" korrispondenti biex tagħmel tibdila.
    
     * "%s": iċċekkja t-taqsim tat-tastiera kurrenti u ibdilha jekk hemm
    bżonn.
    
     * "%s": iċċekkja l-għażla tal-pajjiż. Jekk m'intix f'dan il-pajjiż,
    klikkja l-buttuna "%s" u agħżel ieħor. Jekk il-pajjiż mhux fil-lista
    murija, klijja l-buttuna "%s" biex tikseb lista sħiħa ta' pajjiżi.
    
     * "%s": impliċitament, DrakX jiddeduċi ż-żona tal-ħin skond il-pajjiż
    li għażilt. Tista' tagħfas il-buttuna "%s" jekk dan mhux tajjeb.
    
     * "%s": ivverifika l-konfigurazzjoni tal-maws u klikkja l-buttuna biex
    tibdilha jekk hemm bżonn.
    
     * "%s": ikklikkja l-buttuna "%s" biex tħaddem is-saħħar tal-
    konfigurazzjoni tal-printer. Ikkonsulta l-kapitlu korrispondenti tal-manwal
    "Starter Guide" għal iżjed tagħrif dwar kif tissettja printer ġdid. L-
    interfaċċja ppreżentata fil-manwal hija simili għal dik użata waqt l-
    installazzjoni.
     * "%s": Jekk tinstab kard tal-awdjo fis-sistema, tintwera hawn. Jekk
    tinduna li l-kard murija mhix dik attwalment preżenti fis-sistema, tista'
    tikklikkja l-buttuna u tagħżel drajver differenti.
     * "%s": jekk għandek kard tat-TV, hawn tintwera informazzjoni dwar il-
    konfigurazzjoni tagħha. Jekk għandek kard tat-TV imma ma ngħarfitx 
    awtomatikament, klikkja "%s" biex tissettjaha manwalment.
    
     * "%s": klikkja "%s" biex tibdel il-parametri assoċjati mal-kard jekk
    taħseb li l-konfigurazzjoni hija inkorretta.
    
     * "%s": impliċitament, DrakX jikkonfiguralek l-interfaċċja grafika
    f'reżoluzzjoni ta' 800x600 jew 1024x768. Jekk dan ma jgħoddx għalik, klikkha
    "%s" biex tikkonfigura l-interfaċċja grafika.
    
     * "%s": jekk tixtieq tikkonfigura l-aċċess għall-internet jew network
    lokali tista tagħmel dan issa. Irreferi għad-dokumentazzjoni stampata jew
    uża ċ-Ċentru tal-Kontroll Mandrakelinux wara li tlesti l-installazzjoni biex
    tikseb għajnuna online sħiħa.
    
     * "%s": jippermettilek tissettja indirizzi proxy għall-HTTP u FTP jekk il-
    kompjuter qiegħed wara server proxy.
    
     * "%s": dan l-element iħallik terġa' tiddefinixxi l-livell ta' sigurtà
    minn kif kien issettjat f'pass ta' qabel ().
    
     * "%s": jekk intenzjonat tqabbad il-kompjuter ma' l-internet, hija ideja 
    tajba tipproteġi lilek innifsek minn intrużjonijiet billi tissettja firewall.
    Ikkonsulta s-sezzjoni korrispondenti fil-manwal "Starter Guide" għal iżjed
    dettalji dwar il-firewall.
    
     * "%s": jekk tixtieq tissettja l-konfigurazzjoni tal-bootloader, klikkja
    din il-buttuna. Dan għandu jsir minn utenti avvanzati biss. Irreferi għad-
    dokumentazzjoni stampata, jew l-għajnuna online dwar il-konfigurazzjoni tal-
    bootloader fiċ-Ċentru tal-Kontroll Mandrakelinux.
    
     * "%s": permezz ta' dan l-element tista' tirfina liema servizzi se 
    jitħaddmu fuq il-kompjuter. Jekk qed tippjana li tuża l-kompjuter bħala 
    server hija ideja tajba tirrevedi din is-sezzjoni.

en: Timezone
mt: Żona tal-ħin

en: TV card
mt: Kard TV

en: ISDN card
mt: Kard ISDN

en: Graphical Interface
mt: Interfaċċja grafika

en: Security Level
mt: Livell ta' sigurtà

en: Firewall
mt: Firewallr

en: Services
mt: Servizzi

en: Choose the hard drive you want to erase in order to install your new
    Mandrakelinux partition. Be careful, all data on this drive will be lost
    and will not be recoverable!
mt: Agħżel liema ħard disk trid tħassar biex tinstalla l-partizzjonijiet tal-
    Mandrakelinux fuqha. Oqgħod attent, l-informazzjoni kollha fuq din id-
    diska jintilef u ma jkunx jista' jinġab lura!

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to quit this operation without losing data and partitions
    present on this hard drive.
mt: Klikkja fuq "%s" jekk trid tħassar l-informazzjoni u partizzjonijiet 
    kollha li hemm fuq dan il-ħard disk. Oqgħod attent, wara li tagħfas "%s"
    ma tkunx tista' terġa' tikseb l-informazzjoni u partizzjonijiet li hemm
    fuq dan il-ħard disk, inkluż fajls tal-Windows.
    
    Klikkja "%s" biex twaqqaf dan il-proċess minngħajr ma tħassar
    l-informazzjoni u partizzjonijiet fuq dan il-ħard disk.

en: Next ->
mt: Li jmiss ->

en: <- Previous
mt: <- Ta' qabel

en: Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
mt: Ma nistax naċċessa moduli tal-kernel li jikkorrispondu għall-kernel (fajl %s nieqes). Dan normalment ifisser li l-flopi mhuwiex sinkronizzat mal- installazzjoni. Jekk jogħġbok oħloq flopi ġdida biex tistartja fuqha.

en: You must also format %s
mt: Trid ukoll tifformattja %s

en: Do you have further supplementary media?
mt: Għandek iżjed sorsi supplimentari?

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: The following media have been found and will be used during install: %s.
    
    
    Do you have a supplementary installation media to configure?
mt: Dawn is-sorsi ta' installazzjoni instabu u se jintużaw waqt l-installazzjoni: %s.
    
    
    Għandek xi sorsi supplimentari li trid tikkonfigura?

en: No device found
mt: Ebda tagħmir ma nstab!

en: Insert the CD
mt: Daħħal is-CD

en: Insert the CD 1 again
mt: Erġa' daħħal CD 1

en: URL of the mirror?
mt: URL tal-mera?

en: Can't find a package list file on this mirror. Make sure the location is correct.
mt: Ma nistax insib fajl hdlist fuq din il-mera

en: Change your Cd-Rom!
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
mt: Ibdel is-CD-ROM!
    
    Jekk jogħġbok daħħal id-diska mmarkata "%s" fid-drajv u agħfas Ok meta tlesti.

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They do not have any known security
    issues, but some new ones could be found. In that case, you must make sure
    to upgrade as soon as possible.
    
    
    Do you really want to install these servers?
mt: Int għażilt dan is-server/s: %s
    
    
    Dawn is-servers huma attivati impliċitament. M'għandhom ebda problemi ta'
    sigurtà magħrufa, imma jistgħu jinstabu ġodda minn żmien għal żmien. Għalhekk,
    importanti li żżommhom aġġornati.
    
    
    Żgur li trid tinstalla dawn is-servers?

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
mt: Dawn il-pakketti se jitneħħew biex iħalluk taġġorna s-sistema: %s
    
    
    Żgur li trid tneħħi dawn il-pakketti?

en: Error reading file %s
mt: Problema fil-qari tal-fajl %s

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
mt: Instabet problema - ebda apparat validu ma nstab fejn jinħolqu filesystems ġodda. Iċċekkja l-kompjuter għall-kawża ta' din il-problema.

en: Can not make screenshots before partitioning
mt: Ma nistax nieħu ritratti tal-iskrin qabel toħloq il-partizzjonijiet

en: Screenshots will be available after install in %s
mt: Ir-ritratti jkunu disponibbli wara l-installazzjoni f' %s

en: System installation
mt: Installazzjoni tas-sistema

en: System configuration
mt: Konfigurazzjoni tas-sistema

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
mt: Xi apparat fil-kompjuter tiegħek jeħtieġ drajvers speċjali biex jaħdem.
    Tista' ssib iżjed informazzjoni dwarhom fuq: %s

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
mt: Għandek bżonn partizzjoni "root".
    Għal dan l-ewwel oħloq partizzjoni (jew agħżel waħda eżistenti)
    Imbagħad agħżel "Punt ta' mmuntar" u ssettjah għal "/"

en: You do not have a swap partition.
    
    Continue anyway?
mt: M'għandekx partizzjoni "swap".
    
    Trid tkompli xorta?

en: You must have a FAT partition mounted in /boot/efi
mt: Għandek bżonn partizzjoni FAT immuntata fuq /boot/efi

en: Not enough free space to allocate new partitions
mt: M'hemmx biżżejjed spazju vojt biex jinħolqu l-partizzjonijiet il-ġodda

en: Use existing partitions
mt: Uża partizzjoni eżistenti

en: There is no existing partition to use
mt: M'hemmx partizzjonijiet eżistenti x'nuża

en: Use the Windows partition for loopback
mt: Uża l-partizzjoni tal-Windows għal loopback

en: Which partition do you want to use for Linux4Win?
mt: Liema partizzjoni trid tuża għal Linux4Win?

en: Choose the sizes
mt: Agħżel id-daqsijiet

en: Root partition size in MB:
mt: Daqs tal-partizzjoni root f' MB:

en: Swap partition size in MB:
mt: Daqs tal-partizzjoni Swap f' MB:

en: There is no FAT partition to use as loopback (or not enough space left)
mt: M'hemmx partizzjonijiet FAT biex tintuża bħala loopback (jew m'hemmx
    biżżejjed spazju)

en: Which partition do you want to resize?
mt: Liema partizzjoni trid tibdlilha d-daqs?

en: The FAT resizer is unable to handle your partition, 
    the following error occurred: %s
mt: Il-programm biex tibdel id-daqs ta' partizzjoni FAT m'hux
    kapaċi tbiddel din il-partizzjoni - instabet din il-problema:
    %s

en: Computing the size of the Windows partition
mt: Qed jiġi kalkulat id-daqs tal-partizzjoni Windows

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrakelinux installation.
mt: Il-partizzjoni tal-Windows hija mgerfxa wisq. Jekk jogħġbok ħaddem "defrag".

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful: this
    operation is dangerous. If you have not already done so, you
    first need to exit the installation, run "chkdsk c:" from a
    Command Prompt under Windows (beware, running graphical program
    "scandisk" is not enough, be sure to use "chkdsk" in a
    Command Prompt!), optionally run defrag, then restart the
    installation. You should also backup your data.
    When sure, press Ok.
mt: TWISSIJA!
    
    DrakX issa se jbiddel id-daqs tal-partizzjoni Windows. Oqgħod
    attent: dan il-proċess huwa perikoluż. Jekk għadek m'għamiltx dan,
    jaqbillek l-ewwel toħroġ mill-proċess tal-installazzjoni, tħaddem
    "scandisk" mill-"command prompt" tal-Windows u idejalment 
    anke "defrag", u mbagħad terġa' tibda l-installazzjoni. Int 
    rakkomandat ukoll li tieħu kopja tas-sigurtà tal-informazzjoni 
    importanti.
    Meta tkun ċert, agħfas Ok.

en: Which size do you want to keep for Windows on
mt: X'daqs trid iżżomm għall-windows fuq

en: partition %s
mt: partizzjoni %s

en: Resizing Windows partition
mt: Qed nikkalkula l-limiti tal-filesystem tal-Windows

en: FAT resizing failed: %s
mt: Bdil tad-daqs FAT falla: %s

en: There is no FAT partition to resize (or not enough space left)
mt: M'hemmx partizzjonijiet FAT biex tibdel id-daqs (jew m'hemmx biżżejjed spazju).

en: Remove Windows(TM)
mt: Neħħi l-Windows(TM)

en: You have more than one hard drive, which one do you install linux on?
mt: Għandek iżjed minn ħard disk waħda. Fuq liema trid tinstalla l-Linux?

en: ALL existing partitions and their data will be lost on drive %s
mt: Il-partizzjonijiet kollha fuq id-diska %s u l-informazzjoni ta' ġo fihom se jintilfu

en: Use fdisk
mt: Uża fdisk

en: You can now partition %s.
    When you are done, do not forget to save using `w'
mt: Tista' tippartizzjona %s.
    X'ħin tlesti, tinsiex tikteb il-bidliet billi tittajpja "w".

en: I can not find any room for installing
mt: Ma nistax insib spazju fejn ninstalla.

en: The DrakX Partitioning wizard found the following solutions:
mt: Is-saħħar ta' partizzjonament DrakX sab dawn is-soluzzjonijiet:

en: Partitioning failed: %s
mt: Partizzjonament falla: %s

en: Bringing up the network
mt: Qed intella' n-network

en: Bringing down the network
mt: Qed inniżżel in-network

en: Warning: Free Software may not necessarily be patent free, and some Free
    Software included may be covered by patents in your country. For example, the
    MP3 decoders included may require a licence for further usage (see
    http://www.mp3licensing.com for more details). If you are unsure if a patent
    may be applicable to you, check your local laws.
mt: Twissija: Softwer Ħieles mhux neċessarjament ħieles minn patenti, u ċerti 
    Softwer Ħieles inkluż jista' jkun kopert minn patenti fil-pajjiż fejn tużah.
    Per eżempju, programmi MP3 inklużi jistgħu jeħtieġu liċenzja biex tużahom
    (ara http://www.mp3licensing.com għal dettalji). Jekk m'intix ċert jekk
    patent japplikax għalik, iċċekkja l-liġijiet lokali.

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
mt: 
    Twissija
    
    Jekk jogħġbok aqra sew it-termini ta' taħt. Jekk ma taqbilx ma xi parti,
    ma tistax tinstalla s-CD li jmiss. Agħfas "Ma naċċettax" biex tkompli 
    l-installazzjoni minngħajr dan is-CD.
    
    
    Xi komponenti tas-CD li jmiss ma jaqgħux taħt il-liċenzja GPL jew liċenzji
    simili. Kull komponent simili għalhekk huwa kontrollat mit-termini u
    kundizzjonijiet tal-liċenzja speċifika tiegħu. Jekk jogħġbok aqra sew
    u segwi dawn il-liċenzji speċifiċi qabel tuża jew tiddistribwixxi dawn il-
    komponenti.
    Dawn il-liċenzji ġeneralment jipprojbixxu t-trasferiment, ikkupjar (ħlief 
    bħala kopja tas-sigurtà), ridistribuzzjoni, "reverse engineering", diżassemblaġġ,
    dikompilazzjoni jew modifika ta' dawn il-komponenti. Ksur ta' dan
    il-qbil jittermina immedjatament id-drittijiet tiegħek taħt din il-liċenzja.
    Sakemm il-liċenzja ma tagħtikx dawn id-drittijiet, normalment ma tistax
    tinstalla dawn il-programmi fuq iżjed minn kompjuter wieħed, jew 
    tadattahom biex jintużaw fuq network. Jekk għandek xi dubju, jekk 
    jogħġbok ikkuntattja direttament lid-distributur jew editur tal-komponent.
    It-trasferiment lill terzi partijiet jew ikkupjar ta' dawn il-komponenti inkluż
    id-dokumentazzjoni normalment huwa miċħud.
    
    
    Id-drittijiet kollha tal-komponenti tas-CD li jmiss huma tal-awturi rispettivi u
    huma protetti minn liġijiet ta' propjetà intellettwali u copyright applikabbli
    għal programmi ta' softwer.

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrakelinux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrakelinux User's Guide.
mt: Prosit! L-installazzjoni issa lesta.
    Neħħi l-flopi/CD u agħfas Enter biex tirristartja.
    
    
    Għal informazzjoni dwar aġġornamenti li saru għal din il-verżjoni ta' 
    Mandrakelinux, iċċekkja s-sezzjoni "Errata" li hemm fuq:
    
    
    %s
    
    
    Informazzjoni dwar kif tissettja s-sistema tinstab fil-kapitlu "Post-install"
    fil-Mandrakelinux User's Guide uffiċjali.

en: Duplicate mount point %s
mt: Punt ta' mmuntar doppju %s

en: Some important packages did not get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl media/main/*.rpm"
mt: Xi pakketti importanti ma ġewx installati sew.
    Jew id-drajv tas-CDROM, jew is-CD nnifisha huma difettużi.
    Tista' tiċċekkja s-CD fuq kompjuter diġà nstallat permezz tal-kmand "rpm -qpl media/main/*.rpm"

en: No floppy drive available
mt: M'hemmx drajv flopi

en: Entering step `%s'
mt: Dieħel fil-pass "%s"

en: Your system is low on resources. You may have some problem installing
    Mandrakelinux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
mt: Is-sistema hija nieqsa mir-riżorsi. Jista' jkollok problema biex tinstalla 
    l-Mandrakelinux. Jekk jiġri dan, ipprova installazzjoni testwali. Għal dan,
    agħfas F1 meta titla' s-CD, imbagħad ittajpja "text".

en: Package Group Selection
mt: Għażla ta' gruppi ta' pakketti

en: Total size: %d / %d MB
mt: Daqs totali: %d / %d MB

en: Bad package
mt: Pakkett ħażin

en: Version:
mt: Verżjoni:

en: Size:
mt: Daqs:

en: Importance:
mt: Importanza:

en: You can not select/unselect this package
mt: Ma tistax tagħżel/tneħħi dan il-pakkett

en: due to missing %s
mt: minħabba %s nieqes

en: due to unsatisfied %s
mt: minħabba %s mhux sodisfatt

en: trying to promote %s
mt: qed nipprova nippromwovi %s

en: in order to keep %s
mt: sabiex inżomm %s

en: You can not select this package as there is not enough space left to install it
mt: Ma tistax tagħżel dan il-pakkett għax ma fadalx biżżejjed spazju għalih

en: The following packages are going to be installed
mt: Dawn huma l-pakketti li se jiġu nstallati

en: The following packages are going to be removed
mt: Dawn huma l-pakketti li se jiġu mneħħija

en: This is a mandatory package, it can not be unselected
mt: Dan il-pakkett huwa kruċjali, ma jistax jitneħħa

en: You can not unselect this package. It is already installed
mt: Ma tistax tneħħi l-għażla minn dan il-pakkett, diġà nstallat.

en: This package must be upgraded.
    Are you sure you want to deselect it?
mt: Dan il-pakkett għandu bżonn jiġi aġġornat.
    Żgur li trid tneħħi l-għażla?

en: You can not unselect this package. It must be upgraded
mt: Ma tistax tneħħi l-għażla minn dan il-pakkett. Irid jiġi aġġornat.

en: Show automatically selected packages
mt: Uri l-pakketti magħżula awtomatikament

en: Updating package selection
mt: Qed naġġorna l-għażla ta' pakketti

en: Minimal install
mt: Installazzjoni minima

en: Choose the packages you want to install
mt: Agħżel il-pakketti li trid tinstalla

en: Installing
mt: Qed ninstalla

en: Estimating
mt: Qed nieħu stima

en: No details
mt: Ebda dettalji

en: Time remaining
mt: Ħin li fadal

en: Please wait, preparing installation...
mt: Stenna ftit, qed nipprepara l-installazzjoni

en: %d packages
mt: %d pakketti

en: Installing package %s
mt: Qed jinstalla il-pakkett %s

en: Refuse
mt: Ma naċċettax

en: Change your Cd-Rom!
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you do not have it, press Cancel to avoid installation from this Cd-Rom.
mt: Ibdel is-CD-ROM!
    
    Jekk jogħġbok daħħal id-diska mmarkata "%s" fid-drajv u agħfas Ok meta tlesti.
    Jekk m'għandekx din id-diska, agħfas "Ikkanċella" biex taqbeż il-pakketti li qegħdin fuqha.

en: There was an error ordering packages:
mt: Kien hemm problema fl-ordni tal-pakketti:

en: Go on anyway?
mt: Trid tkompli xorta?

en: There was an error installing packages:
mt: Kien hemm problema fl-installazzjoni tal-pakketti:

en: not configured
mt: mhux konfigurat

en: The following installation media have been found.
    If you want to skip some of them, you can unselect them now.
mt: Dawn is-sorsi ta' installazzjoni instabu.
    Jekk trid taqbeż uħud minnhom, tista' tneħħi l-marka issa.

en: License agreement
mt: Qbil mal-liċenzja

en: Release Notes
mt: Noti dwar il-ħarġa

en: Please choose your keyboard layout.
mt: Jekk jogħġbok agħżel tqassim tat-tastiera.

en: Here is the full list of available keyboards
mt: Din hi lista sħiħa tat-tastieri disponibbli

en: Install/Upgrade
mt: Installa/Aġġorna

en: Is this an install or an upgrade?
mt: Din hija installazzjoni ġdida jew aġġornament?

en: Upgrade %s
mt: Aġġorna %s

en: Encryption key for %s
mt: Ċifrarju għal %s

en: Please choose your type of mouse.
mt: Jekk jogħġbok agħżel it-tip tal-maws.

en: Mouse Port
mt: Port tal-maws

en: Please choose which serial port your mouse is connected to.
mt: Jekk jogħġbok agħżel il-port serjali li miegħu hemm imqabbad il-maws.

en: Buttons emulation
mt: Emulazzjoni tal-buttuni

en: Button 2 Emulation
mt: Emulazzjoni ta' buttuna #2

en: Button 3 Emulation
mt: Emulazzjoni ta' buttuna #3

en: Configuring PCMCIA cards...
mt: Qed nissettja kard PCMCIA...

en: Configuring IDE
mt: Qed nikkonfigura IDE

en: No partition available
mt: m'hemmx partizzjonijiet disponibbli

en: Scanning partitions to find mount points
mt: Qed niskannja partizzjonijiet biex insib punti ta' mmuntar

en: Choose the mount points
mt: Agħżel punti ta' mmuntar

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
mt: M'hemmx spazju għal bootstrap ta' 1MB. L-installazzjoni se tkompli, imma biex tħaddem is-sistema trid toħloq partizzjoni bootstrap f' Diskdrake.

en: Choose the partitions you want to format
mt: Agħżel liema partizzjonijiet trid tifformattja

en: Check bad blocks?
mt: Trid tiċċekkja għal blokki ħżiena?

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
mt: Ma rnexxielix jiċċekkja l-filesystem %s. Trid issewwi l-problemi? (attent, tista' titlef informazzjoni)

en: Not enough swap space to fulfill installation, please add some
mt: M'hemmx biżżejjed swap biex issir l-installazzjoni, jekk jogħġbok żid ftit

en: Looking for available packages and rebuilding rpm database...
mt: Qed insib pakketti disponibbli u nerġa' nibni d-database RPM...

en: Looking for available packages...
mt: Qed insib pakketti disponibbli

en: Looking at packages already installed...
mt: Qed naqra l-pakketti diġà nstallati...

en: Finding packages to upgrade...
mt: Qed insib pakketti x'naġġorna

en: Choose a mirror from which to get the packages
mt: Agħżel mera minn fejn trid iġġib il-pakketti

en: Your system does not have enough space left for installation or upgrade (%d > %d)
mt: Is-sistema m'għandiex biżżejjed spazju għall-installazzjoni jew aġġornament (%d > %d)

en: Save
mt: Ikteb

en: Selected size is larger than available space
mt: Id-daqs tal-għażla huwa ikbar mill-ispazju disponibbli

en: Type of install
mt: Tip ta' installazzjoni

en: You have not selected any group of packages.
    Please choose the minimal installation you want:
mt: Għadek m'għażilt ebda grupp ta' pakketti
    Jekk jogħġbok agħżel installazzjoni minima li trid:

en: With basic documentation (recommended!)
mt: B' dokumentazzjoni bażika (rakkomandat)

en: Truly minimal install (especially no urpmi)
mt: Installazzjoni verament minima (mingħajr urpmi)

en: All
mt: Kollha

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
mt: Jekk għandek is-CDs kollha fil-lista ta' taħt agħfas "Ok".
    Jekk m'għandek ebda waħda agħfas "Ikkanċella".
    Jekk m'għandekx uħud minnhom, neħħi li m'għandekx u agħfas "Ok".

en: Cd-Rom labeled "%s"
mt: CD-ROM immarkat "%s"

en: Preparing installation
mt: Qed nipprepara l-installazzjoni

en: Installing package %s
    %d%%
mt: Qed jiġi nstallat il-pakkett %s
    %d%%

en: Post-install configuration
mt: Konfigurazzjoni ta' wara l-installazzjoni

en: Please insert the Update Modules floppy in drive %s
mt: Jekk jogħġbok daħħal "update modules floppy" fid-drajv %s

en: You now have the opportunity to download updated packages. These packages
    have been updated after the distribution was released. They may
    contain security or bug fixes.
    
    To download these packages, you will need to have a working Internet 
    connection.
    
    Do you want to install the updates?
mt: Issa għandek l-opportunità li tniżżel pakketti aġġornati. Dawn ġew ippubblikati 
    wara li din id-distribuzzjoni inħarġet. Jistgħu jinkludu tiswijiet ta' problemi jew 
    sigurtà.
    
    Biex tniżżel dawn il-pakketti, jrid ikollok konnessjoni mal-internet qed taħdem.
    
    Trid tinstalla dawn l-aġġornamenti?

en: Contacting Mandrakelinux web site to get the list of available mirrors...
mt: Qed nikkuntattja l-website ta' Mandrakelinux biex nikseb lista tal-mirja disponibbli

en: Contacting the mirror to get the list of available packages...
mt: Qed nikkuntattja l-mera biex nikseb lista tal-pakketti disponibbli

en: Unable to contact mirror %s
mt: Ma stajtx nikkuntattja l-mera %s

en: Would you like to try again?
mt: Tixtieq terġa' tipprova?

en: Which is your timezone?
mt: Liem hi ż-żona orarja tiegħek?

en: Automatic time synchronization (using NTP)
mt: Sinkronizzazzjoni tal-ħin awtomatiku (permezz ta' NTP)

en: NTP Server
mt: Server NTP

en: Summary
mt: Sommarju

en: System
mt: Sistema

en: Hardware
mt: Ħardwer

en: Remote CUPS server
mt: Server CUPS remot

en: No printer
mt: Ebda printer

en: Do you have an ISA sound card?
mt: Għandek kard tal-awdjo ISA?

en: Run "alsaconf" or "sndconfig" after installation to configure your sound card
mt: Ħaddem "alsaconf" jew "sndconfig" wara l-installazzjoni biex tikkonfigura l-kard awdjo.

en: No sound card detected. Try "harddrake" after installation
mt: Ebda kard tal-awdjo ma nstabet. Ipprova ħaddem "harddrake" wara l-installazzjoni

en: Graphical interface
mt: Interfaċċja grafika

en: Network & Internet
mt: Network u internet

en: configured
mt: konfigurat

en: Security
mt: Sigurtà

en: activated
mt: attivat

en: disabled
mt: mitfi

note: -PO: example: lilo-graphic on /dev/hda1
en: %s on %s
mt: %s fuq %s

en: Services: %d activated for %d registered
mt: Servizzi: %d imtella' għal %d reġistrati

en: You have not configured X. Are you sure you really want this?
mt: Għadek ma kkonfigurajtx X. Żgur trid hekk?

en: Preparing bootloader...
mt: Qed nipprepara l-bootloader

en: Do you want to use aboot?
mt: Trid tuża "aboot"?

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
mt: Problema fl-installazzjoni ta' aboot.
    trid tipprova timponi l-installazzjoni anke jekk tħassar l-ewwel partizzjoni?

en: In this security level, access to the files in the Windows partition is restricted to the administrator.
mt: F'dan il-livell ta' sigurtà, l-aċċess għall-fajls fuq il-partizzjoni tal-Windows huwa ristrett għall-amministratur.

en: Insert a blank floppy in drive %s
mt: Daħħal flopi vojta fid-drajv %s

en: Please insert another floppy for drivers disk
mt: Jekk jogħġbok daħħal flopi ieħor għad-diska ta' drajvers

en: Creating auto install floppy...
mt: Qed jinħoloq flopi awto-installazzjoni

en: Some steps are not completed.
    
    Do you really want to quit now?
mt: Xi passi ma ġewx finalizzati.
    
    Trid toħroġ issa?

en: Generate auto install floppy
mt: Oħloq flopi awto-installa

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
mt: L-awto-installazzjoni tista' tkun totalment awtomatizzata
    jekk trid. F'dak il-każ tieħu l-ħard disk kollu!!
    (dan huwa ntenzjonat għal installazzjoni fuq kompjuter ġdid)
    
    Forsi tippreferi tuża "replay" tal-installazzjoni.

en: Mandrakelinux Installation %s
mt: Installazzjoni Mandrakelinux %s

note: -PO: This string must fit in a 80-char wide text screen
en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
mt:   <Tab>/<Alt-Tab> bejn l-elementi  | <Space> jimmarka | <F12> skrin li jmiss

en: Choose a file
mt: Agħżel fajl

en: Add
mt: Żid

en: Modify
mt: Biddel

en: Remove
mt: Neħħi

en: Basic
mt: Bażiku

en: Finish
mt: Spiċċa

en: Do
mt: Agħmel

en: Bad choice, try again
mt: Għażla ħażina, erġa' pprova

en: Your choice? (default %s)
mt: L-għażla tiegħek? (impliċita: %s)

en: Entries you'll have to fill:
    %s
mt: Elementi li trid timla':
    %s

en: Your choice? (0/1, default `%s')
mt: L-għażla tiegħek? (0/1, impliċitu: %s)

en: Button `%s': %s
mt: Buttuna "%s": %s

en: Do you want to click on this button?
mt: Trid tikklikkja din il-buttuna?

en: Your choice? (default `%s'%s)
mt: L-għażla tiegħek? (impliċita: "%s"%s)

en:  enter `void' for void entry
mt: daħħal "void" għal element vojt

en: => There are many things to choose from (%s).
mt: => Hemm ħafna affarijiet minn xiex tagħżel (%s).

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
mt: Jekk jogħġbok agħżel l-ewwel numru minn dawn l-għaxra li trid tbiddel, jew agħfas Enter biex tkompli.
    X'tagħżel?

en: => Notice, a label changed:
    %s
mt: => Nota, l-isem inbidel:
    %s

en: Re-submit
mt: Erġa' ssottometti

en: _: keyboard
    Czech (QWERTZ)
mt: Ċekk (QWERTZ)

en: _: keyboard
    German
mt: Ġermaniż

en: _: keyboard
    Dvorak
mt: Dvorak

en: _: keyboard
    Spanish
mt: Spanjol

en: _: keyboard
    Finnish
mt: Finlandiż

en: _: keyboard
    French
mt: Franċiż

en: _: keyboard
    Norwegian
mt: Norveġiż

en: _: keyboard
    Polish
mt: Pollakk

en: _: keyboard
    Russian
mt: Russu

en: _: keyboard
    Swedish
mt: Svediż

en: UK keyboard
mt: Renju Unit

en: US keyboard
mt: Stati Uniti

en: _: keyboard
    Albanian
mt: Albaniż

en: _: keyboard
    Armenian (old)
mt: Armen (antik)

en: _: keyboard
    Armenian (typewriter)
mt: Armen (tajprajter)

en: _: keyboard
    Armenian (phonetic)
mt: Armen (fonetiku)

en: _: keyboard
    Arabic
mt: Għarbi

en: _: keyboard
    Azerbaidjani (latin)
mt: Ażeri (latin)

en: _: keyboard
    Belgian
mt: Belġjan

en: _: keyboard
    Bengali (Inscript-layout)
mt: Bengali (tqassim Inscript)

en: _: keyboard
    Bengali (Probhat)
mt: Bengali (tqassim Probhat)

en: _: keyboard
    Bulgarian (phonetic)
mt: Bulgaru (fonetiku)

en: _: keyboard
    Bulgarian (BDS)
mt: Bulgaru (BDS)

en: _: keyboard
    Brazilian (ABNT-2)
mt: Brażiljan (ABNT-2)

en: _: keyboard
    Bosnian
mt: Bożnian

en: _: keyboard
    Belarusian
mt: Bjelorussu

en: _: keyboard
    Swiss (German layout)
mt: Svizzeru (tqassim Ġermaniż)

en: _: keyboard
    Swiss (French layout)
mt: Svizzeru (tqassim Franċiż)

en: _: keyboard
    Czech (QWERTY)
mt: Ċekk (QWERTY)

en: _: keyboard
    German (no dead keys)
mt: Ġermaniż (bla deadkeys)

en: _: keyboard
    Devanagari
mt: Devanagari

en: _: keyboard
    Danish
mt: Daniż

en: _: keyboard
    Dvorak (US)
mt: Dvorak (US)

en: _: keyboard
    Dvorak (Esperanto)
mt: Dvorak (Esperanto)

en: _: keyboard
    Dvorak (Norwegian)
mt: Dvorak (Norveġiż)

en: _: keyboard
    Dvorak (Swedish)
mt: Dvorak (Svediż)

en: _: keyboard
    Estonian
mt: Estonjan

en: _: keyboard
    Georgian ("Russian" layout)
mt: Ġorġjan (tqassim "Russu")

en: _: keyboard
    Georgian ("Latin" layout)
mt: Ġorġjan (tqassim "Latin")

en: _: keyboard
    Greek
mt: Grieg

en: _: keyboard
    Greek (polytonic)
mt: Grieg (politoniku)

en: _: keyboard
    Gujarati
mt: Guġarati

en: _: keyboard
    Gurmukhi
mt: Gurmukħi

en: _: keyboard
    Hungarian
mt: Ungeriż

en: _: keyboard
    Croatian
mt: Kroat

en: _: keyboard
    Irish
mt: Irlandiż

en: _: keyboard
    Israeli
mt: Iżraeli

en: _: keyboard
    Israeli (phonetic)
mt: Iżraeli (fonetiku)

en: _: keyboard
    Iranian
mt: Iranjan

en: _: keyboard
    Icelandic
mt: Islandiż

en: _: keyboard
    Italian
mt: Taljan

en: _: keyboard
    Inuktitut
mt: Inuktitut

en: _: keyboard
    Japanese 106 keys
mt: Ġappuniż 106 buttuna

en: _: keyboard
    Kannada
mt: Kannada

en: _: keyboard
    Korean
mt: Korean

en: _: keyboard
    Kyrgyz
mt: Kirgiż

en: _: keyboard
    Latin American
mt: Latin Amerikan

en: _: keyboard
    Laotian
mt: Laotjan

en: _: keyboard
    Lithuanian AZERTY (old)
mt: Litwan AZERTY (antik)

en: _: keyboard
    Lithuanian AZERTY (new)
mt: Litwan AZERTY (ġdid)

en: _: keyboard
    Lithuanian "number row" QWERTY
mt: Litwan QWERTY "number row"

en: _: keyboard
    Lithuanian "phonetic" QWERTY
mt: Litwan QWERTY fonetiku

en: _: keyboard
    Latvian
mt: Latvjan

en: _: keyboard
    Malayalam
mt: Malajalam

en: _: keyboard
    Macedonian
mt: Maċedonjan

en: _: keyboard
    Myanmar (Burmese)
mt: Mjanmar (Burmiż)

en: _: keyboard
    Mongolian (cyrillic)
mt: Mongoljan (ċirilliku)

en: _: keyboard
    Maltese (UK)
mt: Malti

en: _: keyboard
    Maltese (US)
mt: Malti (tqassim US)

en: _: keyboard
    Dutch
mt: Olandiż

en: _: keyboard
    Oriya
mt: Orija

en: _: keyboard
    Polish (qwerty layout)
mt: Pollakk (qwerty)

en: _: keyboard
    Polish (qwertz layout)
mt: Pollakk (qwertz)

en: _: keyboard
    Portuguese
mt: Portugiż

en: _: keyboard
    Canadian (Quebec)
mt: Kanadiż (Quebec)

en: _: keyboard
    Romanian (qwertz)
mt: Rumen (qwertz)

en: _: keyboard
    Romanian (qwerty)
mt: Rumen (qwerty)

en: _: keyboard
    Russian (phonetic)
mt: Russu (fonetiku)

en: _: keyboard
    Saami (norwegian)
mt: Saami (Norveġiż)

en: _: keyboard
    Saami (swedish/finnish)
mt: Saami (svediż/finlandiż)

en: _: keyboard
    Slovenian
mt: Sloven

en: _: keyboard
    Slovakian (QWERTZ)
mt: Slovakk (QWERTZ)

en: _: keyboard
    Slovakian (QWERTY)
mt: Slovakk (QWERTY)

en: _: keyboard
    Serbian (cyrillic)
mt: Serb (ċirilliku)

en: _: keyboard
    Syriac
mt: Sirjakk

en: _: keyboard
    Syriac (phonetic)
mt: Sirjakk (fonetiku)

en: _: keyboard
    Telugu
mt: Telugu

en: _: keyboard
    Tamil (ISCII-layout)
mt: Tamil (ISCII)

en: _: keyboard
    Tamil (Typewriter-layout)
mt: Tamil (tajprajter)

en: _: keyboard
    Tajik
mt: Taġik

en: _: keyboard
    Turkish (traditional "F" model)
mt: Tork (mudell tradizzjonali "F")

en: _: keyboard
    Turkish (modern "Q" model)
mt: Tork (mudell modern "Q")

en: _: keyboard
    Ukrainian
mt: Ukranjan

en: US keyboard (international)
mt: Tastiera US (internazzjonali)

en: _: keyboard
    Uzbek (cyrillic)
mt: Użbeki (ċirilliku)

en: _: keyboard
    Vietnamese "numeric row" QWERTY
mt: Vjetnamiż qwerty "numeric row"

en: _: keyboard
    Yugoslavian (latin)
mt: Jugoslav (latin)

en: Right Alt key
mt: Tast Alt tal-lemin

en: Both Shift keys simultaneously
mt: Iż-żewġ tasti "shift" flimkien

en: Control and Shift keys simultaneously
mt: Ctrl u Shift flimkien

en: CapsLock key
mt: Tast CapsLock

en: Shift and CapsLock keys simultaneously
mt: Shift u CapsLock flimkien

en: Ctrl and Alt keys simultaneously
mt: Ctrl u Alt flimkien

en: Alt and Shift keys simultaneously
mt: Alt u Shift flimkien

en: "Menu" key
mt: Tast Menu

en: Left "Windows" key
mt: Tast Windows tax-xellug

en: Right "Windows" key
mt: Tast Windows tal-lemin

en: Both Control keys simultaneously
mt: Iż-żewġ tasti Ctrl flimkien

en: Both Alt keys simultaneously
mt: Iż-żewġ tasti Alt flimkien

en: Left Shift key
mt: Tast Shift tax-xellug

en: Right Shift key
mt: Tast Shift tal-lemin

en: Left Alt key
mt: Tast Alt tal-lemin

en: Left Control key
mt: Tast Ctrl tax-xellug

en: Right Control key
mt: Tast Ctrl tal-lemin

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
mt: Hawn tista' tagħżel it-tast jew kombinazzjoni ta' tasti
    li jħalluk tibdel minn tqassim għal ieħor tat-tastiera 
    (eż. latin u mhux latin)

en: This setting will be activated after the installation.
    During installation, you will need to use the Right Control
    key to switch between the different keyboard layouts.
mt: Din l-għażla tiġi attivata wara l-installazzjoni.
    Waqt l-installazzjoni, trid tuża t-tast Ctrl tal-lemin
    biex taqleb minn tqassim għall-ieħor.

en: United Arab Emirates
mt: Emirati Għarab Magħquda

en: Afghanistan
mt: Afganistan

en: Antigua and Barbuda
mt: Antigwa u Barbuda

en: Anguilla
mt: Angwilla

en: Albania
mt: Albanija

en: Armenia
mt: Armenija

en: Antarctica
mt: Antarktika

en: Argentina
mt: Arġentina

en: American Samoa
mt: Samoa Amerikana

en: Australia
mt: Awstralja

en: Azerbaijan
mt: Ażerbajġan

en: Bosnia and Herzegovina
mt: Bożnija u Ħerżegovina

en: Bangladesh
mt: Bangladexx

en: Bulgaria
mt: Bulgarija

en: Bahrain
mt: Baħrein

en: Brunei Darussalam
mt: Brunej Darussalam

en: Bolivia
mt: Bolivja

en: Brazil
mt: Brażil

en: Bahamas
mt: Baħamas

en: Bhutan
mt: Butan

en: Bouvet Island
mt: Gżira Bouvet

en: Belarus
mt: Bjelorussja

en: Belize
mt: Beliż

en: Canada
mt: Kanada

en: Cocos (Keeling) Islands
mt: Gżejjer Cocos (Keeling)

en: Congo (Kinshasa)
mt: Kongo (Kinxasa)

en: Central African Republic
mt: Repubblika Ċentrali Afrikana

en: Congo (Brazzaville)
mt: Kongo (Brazzaville)

en: Cote d'Ivoire
mt: Kosta tal-Avorju

en: Cook Islands
mt: Gżejjer Cook

en: Chile
mt: Ċilè

en: Cameroon
mt: Kamerun

en: China
mt: Ċina

en: Colombia
mt: Kolombja

en: Serbia & Montenegro
mt: Serbja u Montenegro

en: Cuba
mt: Kuba

en: Christmas Island
mt: Gżira Christmas

en: Cyprus
mt: Ċipru

en: Djibouti
mt: Dġibuti

en: Denmark
mt: Danimarka

en: Dominica
mt: Dominika

en: Dominican Republic
mt: Repubblika Dumnikana

en: Algeria
mt: Alġerija

en: Ecuador
mt: Ekwador

en: Estonia
mt: Estonja

en: Egypt
mt: Eġittu

en: Western Sahara
mt: Saħara tal-Punent

en: Spain
mt: Spanja

en: Ethiopia
mt: Etjopja

en: Finland
mt: Finlandja

en: Fiji
mt: Fiġi

en: Falkland Islands (Malvinas)
mt: Gżejjer Falkland

en: Faroe Islands
mt: Gżejjer Faroe

en: United Kingdom
mt: Renju Unit

en: Georgia
mt: Ġorġja

en: French Guiana
mt: Gwijana Franċiża

en: Ghana
mt: Gana

en: Gibraltar
mt: Ġibiltar

en: Greenland
mt: Grinlandja

en: Gambia
mt: Gambja

en: Guinea
mt: Gwinea

en: Guadeloupe
mt: Gwadelup

en: Equatorial Guinea
mt: Gwinea Ekwatorjali

en: South Georgia and the South Sandwich Islands
mt: Georgia t'Isfel u l-Gżejjer Sandwich tan-Nofsinhar

en: Guatemala
mt: Gwatemala

en: Guam
mt: Gwam

en: Guinea-Bissau
mt: Gwinea-Bissau

en: Guyana
mt: Gujana

en: Hong Kong SAR (China)
mt: Ħong Kong SAR (Ċina)

en: Heard and McDonald Islands
mt: Gżejjer Heard u McDonald

en: Honduras
mt: Ħonduras

en: Croatia
mt: Kroazja

en: Haiti
mt: Ħaiti

en: Indonesia
mt: Indoneżja

en: Ireland
mt: Irlanda

en: Israel
mt: Iżrael

en: India
mt: Indja

en: British Indian Ocean Territory
mt: Territorju Brittaniku ta' l-Oċean Indjan

en: Iceland
mt: Islandja

en: Jamaica
mt: Ġamajka

en: Jordan
mt: Ġordan

en: Japan
mt: Ġappun

en: Kenya
mt: Kenja

en: Kyrgyzstan
mt: Kirgiżstan

en: Cambodia
mt: Kambodja

en: Comoros
mt: Komoros

en: Saint Kitts and Nevis
mt: San Kitts u Nevis

en: Korea (North)
mt: Korea ta' fuq

en: Kuwait
mt: Kuwajt

en: Cayman Islands
mt: Gżejjer Kajmani

en: Kazakhstan
mt: Każakstan

en: Lebanon
mt: Libanu

en: Saint Lucia
mt: Santa Luċija

en: Liberia
mt: Liberja

en: Lesotho
mt: Leżoto

en: Lithuania
mt: Litwanja

en: Luxembourg
mt: Lussemburgu

en: Latvia
mt: Latvja

en: Libya
mt: Libja

en: Morocco
mt: Marokk

en: Monaco
mt: Monako

en: Moldova
mt: Moldavja

en: Madagascar
mt: Madagaskar

en: Marshall Islands
mt: Gżejjer Marshall

en: Macedonia
mt: Maċedonja

en: Myanmar
mt: Mjanmar

en: Mongolia
mt: Mongolja

en: Northern Mariana Islands
mt: Gżejjer Mariana tat-Tramuntana

en: Martinique
mt: Martinik

en: Mauritania
mt: Mawritanja

en: Mauritius
mt: Mawrizju

en: Mexico
mt: Messiku

en: Malaysia
mt: Malażja

en: Mozambique
mt: Możambik

en: Namibia
mt: Namibja

en: Niger
mt: Niġer

en: Norfolk Island
mt: Gżira Norfolk

en: Nigeria
mt: Niġerja

en: Nicaragua
mt: Nikaragwa

en: Nauru
mt: Nawru

en: Peru
mt: Perù

en: French Polynesia
mt: Polineżja Franċiża

en: Philippines
mt: Filippini

en: Saint Pierre and Miquelon
mt: San Pierre u Miquelon

en: Palestine
mt: Palestina

en: Portugal
mt: Portugall

en: Paraguay
mt: Paragwaj

en: Palau
mt: Palaw

en: Romania
mt: Rumanija

en: Russia
mt: Russja

en: Saudi Arabia
mt: Għarabja Sawdita

en: Solomon Islands
mt: Gżejjer Solomon

en: Singapore
mt: Singapor

en: Saint Helena
mt: Santa Liena

en: Slovenia
mt: Slovenja

en: Svalbard and Jan Mayen Islands
mt: Gżejjer Svalbard u Jan Mayen

en: Senegal
mt: Senegall

en: Somalia
mt: Somalija

en: Suriname
mt: Surinam

en: Sao Tome and Principe
mt: Sao Tome u Principe

en: Syria
mt: Sirja

en: Swaziland
mt: Swazilandja

en: Turks and Caicos Islands
mt: Gżejjer Turks u Caicos

en: Chad
mt: Ċadd

en: French Southern Territories
mt: Territorji Franċiżi tan-Nofsinhar

en: Thailand
mt: Tajlandja

en: Tajikistan
mt: Taġikistan

en: Tokelau
mt: Tokelaw

en: East Timor
mt: Timor tal-Lvant

en: Tunisia
mt: Tuneżija

en: Turkey
mt: Turkija

en: Trinidad and Tobago
mt: Trinidad u Tobago

en: Tanzania
mt: Tanżanija

en: Ukraine
mt: Ukranja

en: United States Minor Outlying Islands
mt: Gżejjer Żgħar Imbegħda ta' l-Istati Uniti

en: Uruguay
mt: Urugwaj

en: Uzbekistan
mt: Użbekistan

en: Vatican
mt: Vatikan

en: Saint Vincent and the Grenadines
mt: San Vinċenz u l-Grenadini

en: Venezuela
mt: Venezwela

en: Virgin Islands (British)
mt: Gżejjer Virgin (Brittanniċi)

en: Virgin Islands (U.S.)
mt: Gżejjer Virgin (US)

en: Vietnam
mt: Vjetnam

en: Wallis and Futuna
mt: Wallis u Futuna

en: Yemen
mt: Jemen

en: Mayotte
mt: Majott

en: South Africa
mt: Afrika t'Isfel

en: Zambia
mt: Żambja

en: Zimbabwe
mt: Żimbabwe

en: You should install the following packages: %s
mt: Trid tinstalla dawn il-pakketti: %s

en: Welcome to %s
mt: Merħba għal %s

en: Circular mounts %s
mt: Muntaġġ ċirkolari %s

en: Remove the logical volumes first
mt: L-ewwel neħħi l-volumi loġiċi minn ġo fih

en: Parameters
mt: Parametri

en: NONE
mt: EBDA

en: Module configuration
mt: Konfigurazzjoni tal-modulu

en: You can configure each parameter of the module here.
mt: Tista' tikkonfigura kull parametru tal-modulu minn hawn.

en: Found %s interfaces
mt: Sibt %s interfaċċji

en: Do you have another one?
mt: Għandek iżjed?

en: Do you have any %s interfaces?
mt: Il-kompjuter għandu interfaċċji %s?

en: See hardware info
mt: Ara info. dwar ħardwer

note: -PO: the first %s is the card type (scsi, network, sound,...) -PO: the second is the vendor+model name
en: Installing driver for %s card %s
mt: Qed ninstalla drajver għal %s kard %s

en: (module %s)
mt: (modulu %s)

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
mt: Issa trid tipprovdi l-għażliet lill-modulu %s.
    Innota li l-indirizzi jridu jiddaħħlu bil-prefiss 0x, bħal "0x123".

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
mt: Tista' tipprovdi l-għażliet lill-modulu %s.
    L-għażliet għandhom il-format "isem=valur isem=valur ...".
    Per eżempju, "io=0x300 irq=7".

en: Module options:
mt: Għażliet tal-modulu:

note: -PO: the %s is the driver type (scsi, network, sound,...)
en: Which %s driver should I try?
mt: Liema drajver %s tridni nipprova?

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
mt: F'ċerti każi id-drajver %s ikollu bżonn iżjed informazzjoni biex jaħdem
    sew, għalkemm is-soltu jaħdem sew mingħajrha. Trid tispeċifika xi
    informazzjoni lid-drajver, jew tħallih ifittex l-apparat waħdu? Kulltant, it-
    tfittix iġiegħel lill-kompjuter jeħel, imma dan m'għandux jagħmel ħsara.

en: Autoprobe
mt: Fittex

en: Specify options
mt: Speċifika informazzjoni

en: Loading module %s failed.
    Do you want to try again with other parameters?
mt: Il-modulu %s ma rnexxielux jitla'.
    Trid terġa' tipprova b'parametri oħra?

en: a number
mt: numru

en: %d comma separated numbers
mt: %d numri separati b'virgoli

en: %d comma separated strings
mt: %d strings separati b'virgoli

en: comma separated numbers
mt: numri separati b'virgoli

en: comma separated strings
mt: strings separati b'virgoli

en: Sun - Mouse
mt: Maws - Sun

en: Generic PS2 Wheel Mouse
mt: Maws bir-rota ġeneriku PS2

en: Automatic
mt: Awtomatiku

en: 1 button
mt: buttuna waħda

en: Generic 2 Button Mouse
mt: Ġeneriku 2 buttuni

en: Generic 3 Button Mouse with Wheel emulation
mt: Maws ġeneriku bi 3 buttuni u emulazzjoni tar-rota

en: Wheel
mt: Rota

en: serial
mt: serjali

en: Generic 3 Button Mouse
mt: Ġeneriku 3 buttuni

en: Logitech MouseMan with Wheel emulation
mt: Logitech MouseMan b'emulazzjoni tar-rota

en: Logitech CC Series with Wheel emulation
mt: Logitech CC Series b'emulazzjoni tar-rota

en: Logitech Mouse (serial, old C7 type)
mt: Maws Logitech (serjali, tip C7 antik)

en: Logitech Mouse (serial, old C7 type) with Wheel emulation
mt: Maws Logitech (serjali, tip C7 antik) b'emulazzjoni tar-rota

en: Kensington Thinking Mouse with Wheel emulation
mt: Kensington Thinking Mouse b'emulazzjoni tar-rota

en: 2 buttons
mt: 2 buttuni

en: 3 buttons
mt: 3 buttuni

en: 3 buttons with Wheel emulation
mt: 3 buttuni b' emulazzjoni tar-rota

en: Universal
mt: Universali

en: Any PS/2 & USB mice
mt: Kwalinkwa maws PS/2 u USB

en: none
mt: ebda

en: No mouse
mt: Ebda maws

en: Please test the mouse
mt: Jekk jogħġbok ittestja l-maws

en: To activate the mouse,
mt: Biex tħaddem il-maws

en: MOVE YOUR WHEEL!
mt: MEXXI R-ROTA!

en: use PPPoE
mt: uża PPPoE

en: use PPTP
mt: uża PPTP

en: use DHCP
mt: uża DHCP

en:  - detected
mt:  - misjub

en: Sagem (using PPPoA) USB
mt: Sagem USB (juża PPPoA)

en: Sagem (using DHCP) USB
mt: Sagem USB (juża DHCP)

en: Connect to the Internet
mt: Aqbad ma' l-internet

en: The most common way to connect with adsl is pppoe.
    Some connections use PPTP, a few use DHCP.
    If you do not know, choose 'use PPPoE'
mt: F'Malta, il-metodu li jintuża biex taqbad mal-ADSL huwa
    PPTP, f'pajjiżi oħra l-iżjed metodu komuni huwa PPPoE, 
    filwaqt li wħud jużaw DHCP.

en: ADSL connection type:
mt: Tip ta' konnessjoni ADSL:

en: Web Server
mt: Server tal-web

en: Domain Name Server
mt: Server tal-ismijiet tad-dominji

en: SSH server
mt: Server SSH

en: FTP server
mt: Server FTP

en: Mail Server
mt: Server tal-imejl

en: POP and IMAP Server
mt: Server POP u IMAP

en: Telnet server
mt: Server Telnet

en: CUPS server
mt: Server CUPS

en: Echo request (ping)
mt: Rikjesta echo (ping)

en: No network card
mt: Ebda kard tan-network

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrakelinux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
mt: Konfiguratur drakfirewall
    
    Dan jikkonfigura firewall personali għal din is-sistema Mandrakelinux.
    Għal kompjuter firewall dedikat, jekk jogħġbok ara d-distribuzzjoni
    speċjalizzata MandrakeSecurity Firewall.

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
mt: konfiguratur drakfirewall
    
    Aċċerta li kkonfigurajt l-aċċess għan-network/internet minn
    drakconnect qabel tkompli.

en: Which services would you like to allow the Internet to connect to?
mt: Liema servizzi trid ikunu aċċessibbli mill-internet?

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.
    Have a look at /etc/services for information.
mt: Tista' ddaħħal diversi portijiet.
    Eżempji validi huma: 139/tcp 139/udp 600:610/tcp 600:610/udp.
    Ħares lejn /etc/services għal iżjed informazzjoni.

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
    
    You can also give a range of ports (eg: 24300:24350/udp)
mt: Port invalidu mogħti: %s.
    Il-format tajjeb huwa "port/tcp" jew "port/udp", 
    fejn port huwa bejn 1 u 65535
    
    Tista' wkoll tagħti medda ta' portijiet (eż 24300:24350/udp)

en: Everything (no firewall)
mt: Kollox (mingħajr firewall)

en: Other ports
mt: Portijiet oħrajn

en: Unlisted - edit manually
mt: Mhux imniżżel - editja manwalment

en: I do not know
mt: Ma nafx

en: Manual
mt: Manwali

en: Manual choice
mt: Għażla manwali

en: Internal ISDN card
mt: Kard ISDN interna

en: Managed
mt: Immaniġġjat

en: Master
mt: Ewlieni

en: Repeater
mt: Ripetitur

en: Secondary
mt: Sekondarju

en: Auto
mt: Awto:

en: Manual configuration
mt: Konfigurazzjoni manwali

en: Automatic IP (BOOTP/DHCP)
mt: IP Awtomatiku (BOOTP/DHCP)

en: Automatic IP (BOOTP/DHCP/Zeroconf)
mt: IP Awtomatiku (BOOTP/DHCP/Zeroconf)

en: Protocol for the rest of the world
mt: Protokoll għall-kumplament tad-dinja

en: European protocol (EDSS1)
mt: Protokoll Ewropew (EDSS1)

en: Protocol for the rest of the world
    No D-Channel (leased lines)
mt: Protokoll għall-kumplament tad-dinja
     ebda kanal D (leased line)

en: Alcatel speedtouch USB modem
mt: Modem Alcatel speedtouch USB

en: Sagem USB modem
mt: Modem Sagem USB

en: Bewan modem
mt: Modem Bewan

en: ECI Hi-Focus modem
mt: Modem ECI Hi-Focus

en: Manual TCP/IP configuration
mt: Konfigurazzjoni TCP/IP manwali

en: DSL over CAPI
mt: DSL fuq CAPI

en: Script-based
mt: Ibbażat fuq skritti

en: Terminal-based
mt: Ibbażat fuq terminal

en: Network & Internet Configuration
mt: Konfigurazzjoni tan-network u internet

en: (detected on port %s)
mt: (misjub fuq port %s)

note: -PO: here, "(detected)" string will be appended to eg "ADSL connection"
en: (detected %s)
mt: (%s misjub)

en: (detected)
mt: (misjub)

en: Modem connection
mt: Konnessjoni b'modem

en: ISDN connection
mt: Konnessjoni ISDN

en: ADSL connection
mt: Konnessjoni ADSL

en: Cable connection
mt: Konnessjoni Cable

en: LAN connection
mt: Konnessjoni LAN

en: Wireless connection
mt: Konnessjoni Wireless

en: Choose the connection you want to configure
mt: Agħżel liema konnessjoni trid tissettja

en: We are now going to configure the %s connection.
    
    
    Press "%s" to continue.
mt: Issa se nissettjaw il-konnessjoni %s.
    
    
    Agħfas %s biex tkompli.

en: Connection Configuration
mt: Konfigurazzjoni tal-konnessjoni

en: Please fill or check the field below
mt: Jekk jogħġbok imla' jew iċċekkja l-elementi t'hawn taħt

en: Card IRQ
mt: IRQ tal-kard

en: Card mem (DMA)
mt: Mem. tal-kard (DMA)

en: Card IO
mt: IO tal-kard

en: Card IO_0
mt: IO_0 tal-kard

en: Card IO_1
mt: IO_1 tal-kard

en: Your personal phone number
mt: Numru tat-telefon tiegħek

en: Provider name (ex provider.net)
mt: Isem tal-ISP (eż. provider.net)

en: Provider phone number
mt: Telefon tal-ISP

en: Provider DNS 1 (optional)
mt: DNS 1 tal-ISP (opzjonali)

en: Provider DNS 2 (optional)
mt: DNS 2 tal-ISP (opzjonali)

en: Dialing mode
mt: Tip ta' daljar

en: Connection speed
mt: Veloċità tal-konnessjoni

en: Connection timeout (in sec)
mt: Ħin biex tiskadi l-konnessjoni (sek)

en: Account Login (user name)
mt: Login tal-kont (user name)

en: Account Password
mt: Password tal-kont

en: Select the network interface to configure:
mt: Agħżel l-interfaċċja tan-network biex tikkonfigura:

en: Net Device
mt: Tagħmir tan-network

en: External ISDN modem
mt: Modem ISDN estern

en: Select a device!
mt: Agħżel apparat

en: ISDN Configuration
mt: Konfigurazzjoni ISDN

en: What kind of card do you have?
mt: X'tip ta' kard għandek?

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
mt: 
    Jekk il-kard hija ISA, il-valuri fuq l-iskrin li jmiss għandhom ikunu tajbin.
    
    Jekk hija kard PCMCIA, trid tkun taf l-IRQ u IO tal-kard.

en: Continue
mt: Kompli

en: Abort
mt: Waqqaf

en: Which of the following is your ISDN card?
mt: Liema minn dawn hija l-kard ISDN tiegħek?

en: A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?
mt: Jeżisti drajver CAPI għal dan il-modem. Id-drajver CAPI jipprovdilek
    iżjed kapaċitajiet mid-drajver b'xejn (bħall-kapaċità li tibgħat faks). 
    Liema drajver trid tuża?

en: Driver
mt: Drajver

en: Which protocol do you want to use?
mt: Liema protokoll trid tuża?

en: Protocol
mt: Protokoll

en: Select your provider.
    If it is not listed, choose Unlisted.
mt: Agħżel provider.
     Jekk m'hux fil-lista, agħżel "mhux imniżżel"

en: Provider:
mt: Provveditur:

en: Your modem is not supported by the system.
    Take a look at http://www.linmodems.org
mt: Il-modem tiegħek mhux sapportit mis-sistema.
    Ara http://www.linmodems.org

en: Select the modem to configure:
mt: Agħżel il-modem li trid tikkonfigura:

en: Please choose which serial port your modem is connected to.
mt: Jekk jogħġbok agħżel ma' liema port serjali huwa mqabbad il-maws.

en: Select your provider:
mt: Agħżel provveditur:

en: Dialup: account options
mt: Dialup: għażliet tal-kont

en: Connection name
mt: Isem tal-konnessjoni

en: Phone number
mt: Numru tat-telefon

en: Login ID
mt: Login

en: Dialup: IP parameters
mt: Dialup: Parametri IP

en: IP parameters
mt: Parametri IP

en: IP address
mt: Indirizz IP

en: Subnet mask
mt: Maskra tas-subnet

en: Dialup: DNS parameters
mt: Dialup: parametri DNS

en: Domain name
mt: Isem tad-dominju

en: First DNS Server (optional)
mt: L-ewwel server DNS (opzjonali)

en: Second DNS Server (optional)
mt: It-tieni server DNS (opzjonali)

en: Set hostname from IP
mt: Issettja isem il-kompjuter mill-IP

en: Gateway IP address
mt: Indirizz IP tal-gateway

en: ADSL configuration
mt: Konfigurazzjoni ADSL

en: Please choose your ADSL provider
mt: Jekk jogħġbok agħżel il-provveditor ta' ADSL

en: You need the Alcatel microcode.
    You can provide it now via a floppy or your windows partition,
    or skip and do it later.
mt: Għandek bżonn il-microcode ta' Alcatel.
    Tista' tipprovdih issa permezz ta' flopi jew partizzjoni 
    tal-Windows, jew taqbżu u tagħmlu iżjed 'il quddiem.

en: Use a floppy
mt: Uża flopi

en: Use my Windows partition
mt: Uża l-partizzjoni tal-Windows

en: Do it later
mt: Agħmel iżjed tard

en: Firmware copy failed, file %s not found
mt: Ikkupjar ta' firmware falla - fajl %s ma nstabx

en: Firmware copy succeeded
mt: Ikkupjar ta' firmware rnexxa

en: You need the Alcatel microcode.
    Download it at:
    %s
    and copy the mgmt.o in /usr/share/speedtouch
mt: Għandek bżonn il-microcode ta' Alcatel.
    Niżżlu minn:
    %s
    u kkopja mgmt.o ġo /usr/share/speedtouch

en: The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.
    
    You can find a driver on http://eciadsl.flashtux.org/
mt: Dan il-modem ECI Hi-Focus ma jistax ikun sapportit minħabba problema fid-distribuzzjoni tad-drajver binarju.
    
    Tista' ssib drajver fuq http://eciadsl.flashtux.org/

en: Manually load a driver
mt: Tella' drajver manwalment

en: WARNING: this device has been previously configured to connect to the Internet.
    Modifying the fields below will override this configuration.
    Do you really want to reconfigure this device?
mt: TWISSIJA: Dan l-apparat diġà kien konfigurat qabel biex jaqbad ma' l-internet.
    Jekk tbiddel il-valuri ta' taħt dawn jieħdu post il-konfigurazzjoni preżenti.
    Żgur trid tikkonfigura dan l-apparat?

en: Congratulations, the network and Internet configuration is finished.
mt: Prosit! Il-konfigurazzjoni tan-network u l-internet lesti.

en: Zeroconf hostname resolution
mt: Reżoluzzjoni ta' isem il-kompjuter Zerconf

en: Configuring network device %s (driver %s)
mt: Qed nikkonfigura apparat tan-network %s (drajver %s)

en: The following protocols can be used to configure an ethernet connection. Please choose the one you want to use
mt: Dawn il-protokolli jistgħu jintużaw biex jikkonfiguraw konnessjoni bl-ethernet. Agħżel dak li trid tuża

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
mt: Jekk jogħġbok daħħal il-konfigurazzjoni IP għal dan il-kompjuter.
    Kull element huwa indirizz IP fil-format deċimali bit-tikek (eż, 1.2.3.4).

en: Assign host name from DHCP address
mt: Assenja isem il-kompjuter mill-indirizz DHCP

en: DHCP host name
mt: Isem il-kompjuter DHCP

en: Track network card id (useful for laptops)
mt: Żomm kont tal-ID tal-kard tan-network (utli fuq laptops)

en: Network Hotplugging
mt: Konfigurazzjoni "hotplug" tan-network

en: Start at boot
mt: Tella' fil-bidu

en: DHCP client
mt: Klijent DHCP

en: IP address should be in format 1.2.3.4
mt: L-indirizz IP irid ikun fil-format "1.2.3.4"

en: Warning: IP address %s is usually reserved!
mt: Twissija: Indirizz IP %s normalment riservat !

en: %s already in use
mt: %s diġà qed jintuża

en: Could not install the %s package!
mt: Ma stajtx ninstalla il-pakkett %s!

en: Please enter the wireless parameters for this card:
mt: Jekk jogħġbok daħħal il-parametri wireless għal din il-kard:

en: Operating Mode
mt: Modalità tal-operazzjoni

en: Network name (ESSID)
mt: Isem tan-network (ESSID)

en: Network ID
mt: ID tan-network

en: Operating frequency
mt: Frekwenza ta' l-operazzjoni

en: Sensitivity threshold
mt: Livell ta' sensitività

en: Bitrate (in b/s)
mt: Rata ta' bits (b/s)

en: Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough '0' (zeroes).
mt: Il-frekwenza għandha jkollha suffiss ta' k, M jew G (eż: "2.46G" għal 2.46 GHz), jew inkella żid biżżejjed żeros.

en: Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough '0' (zeroes).
mt: Il-frekwenza għandha jkollha suffiss ta' k, M jew G (eż: "11M" għal 11M), jew inkella żid biżżejjed żeros.

en: RTS/CTS adds a handshake before each packet transmission to make sure that the
    channel is clear. This adds overhead, but increase performance in case of hidden
    nodes or large number of active nodes. This parameter sets the size of the
    smallest packet for which the node sends RTS, a value equal to the maximum
    packet size disable the scheme. You may also set this parameter to auto, fixed
    or off.
mt: RTS/CTS iżid "handshake" qabel kull trażmissjoni ta' pakket biex jiżgura li
    l-komunikazzjoni hija tajba. Dan iżid ftit dewmien, imma jtejjeb l-effiċjenza 
    f'każ ta' nodi moħbija jew numru kbir ta' nodi attivi. Dan il-parametru 
    jissettja d-daqs ta' l-iżgħar pakkett li għalih in-nod jibgħat RTS, valur
    daqs il-valur massimu jitfi din l-iskema. Tista' wkoll tissettja dan il-
    parametru għal auto, fixed, on jew off.

en: Fragmentation
mt: Frammentazzjoni

en: Iwconfig command extra arguments
mt: parametri oħra għall-kmand iwconfig

en: Here, one can configure some extra wireless parameters such as:
    ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).
    
    See iwconfig(8) man page for further information.
mt: Hawn tista' tikkonfigura xi parametri oħra għall-wireless, bħal:
    ap, channel, commit, enc, power, retry, txpower (nick huwa diġà ssettjat bħala l-isem tal-kompjuter).
    
    Ara l-paġna ta' man għal iwconfig(8) għal iżjed tagħrif.

note: -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
en: Iwspy command extra arguments
mt: parametri oħra għall-kmand iwspy

en: Iwspy is used to set a list of addresses in a wireless network
    interface and to read back quality of link information for each of those.
    
    This information is the same as the one available in /proc/net/wireless :
    quality of the link, signal strength and noise level.
    
    See iwpspy(8) man page for further information.
mt: Iwspy jintuża biex tissettja lista ta' indirizzi fuq interfaċċja tan-
    network wireless u biex taqra lura informazzjoni dwar il-kwalità tal-link
    minn kull wieħed minn dawn.
    
    Din l-informazzjoni hija l-istess bħal dik li ssib fi /proc/net/wireless:
    kwalità tal-link, saħħa tas-sinjal u livell ta' storbju.
    
    Ara l-paġna ta' man għal iwspy(8) għal iżjed tagħrif.

en: Iwpriv command extra arguments
mt: parametri oħra għall-kmand iwpriv

en: Iwpriv enable to set up optionals (private) parameters of a wireless network
    interface.
    
    Iwpriv deals with parameters and setting specific to each driver (as opposed to
    iwconfig which deals with generic ones).
    
    In theory, the documentation of each device driver should indicate how to use
    those interface specific commands and their effect.
    
    See iwpriv(8) man page for further information.
mt: Iwpriv jippermettilek tissettja parametri opzjonali (privati) għall-
    interfaċċja tan-network wireless.
    
    Iwpriv jittratta dwar parametri speċifiċi għal kull drajver (filwaqt li
    iwconfig jittratta dwar parametri ġeneriċi).
    
    Teoretikament, id-dokumentazzjoni ta' kull drajver għandu jindika kif
    tuża dawk il-parametri speċifiċi u l-effett tagħhom.
    
    Ara l-paġna ta' man għal iwpriv(8) għal iżjed tagħrif.

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
mt: Jekk jogħġbok daħħal l-isem tal-kompjuter.
    Dan irid ikun isem sħiħ, bħal "joe.linux.org.mt".
    Tista' wkoll iddaħħal l-indirizz IP tal-gateway, jekk għandek wieħed.

en: Last but not least you can also type in your DNS server IP addresses.
mt: Fl-aħħar imma mhux l-inqas, tista' tittajpja wkoll l-indirizzi tas-servers DNS

en: Host name (optional)
mt: Isem il-kompjuter (opzjonali)

en: Host name
mt: Isem il-kompjuter

en: DNS server 1
mt: Server DNS 1

en: DNS server 2
mt: Server DNS 2

en: DNS server 3
mt: Server DNS 3

en: Search domain
mt: Dominju tat-tfittix

en: By default search domain will be set from the fully-qualified host name
mt: Impliċitament id-dominju tat-tfittix jiġi ssettjat mill-isem tal-kompjuter sħiħ.

en: Gateway (e.g. %s)
mt: Gateway (eż. %s)

en: Gateway device
mt: Apparat gateway

en: DNS server address should be in format 1.2.3.4
mt: L-indirizz tas-server DNS irid ikun fil-format 1.2.3.4

en: Gateway address should be in format 1.2.3.4
mt: L-indirizz tal-gateway irid ikun fil-format 1.2.3.4

en: If desired, enter a Zeroconf hostname.
    This is the name your machine will use to advertise any of
    its shared resources that are not managed by the network.
    It is not necessary on most networks.
mt: Jekk tixtieq, daħħal isem ta' kompjuter zeroconf.
    Dan huwa l-isem li l-kompjuter juża biex tirreklama ir-riżorsi 
    maqsuma li mhux immaniġġjati min-network.
    Dan mhux meħtieġ fuq ħafna networks.

en: Zeroconf Host name
mt: Isem tal-kompjuter Zeroconf

en: Zeroconf host name must not contain a .
mt: Isem il-kompjuter zeroconf ma jridx ikun fih "."

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
mt: Int ikkonfigurajt diversi modi biex taqbad ma' l-internet.
    Liema minnhom trid tuża?

en: Internet connection
mt: Konnessjoni ma' l-internet

en: Configuration is complete, do you want to apply settings?
mt: Il-konfigurazzjoni lesta. Trid tapplika l-konfigurazzjoni?

en: Do you want to start the connection at boot?
mt: Trid taqbad b'din il-konnessjoni malli tixgħel?

en: Automatically at boot
mt: Awtomatikament fil-bidu

en: By using Net Applet in the system tray
mt: Billi tuża l-applet tan-network fit-tray tas-sistema

en: Manually (the interface would still be activated at boot)
mt: Manwalment (l-interfaċċja xorta tiġi attivata max-xegħil)

en: How do you want to dial this connection?
mt: Kif trid tqabbad din il-konnessjoni?

en: The network needs to be restarted. Do you want to restart it?
mt: In-network irid jiġi ristartjat. Tridni nirristarjah?

en: Network Configuration
mt: Konfigurazzjoni tan-network

en: A problem occurred while restarting the network: 
    
    %s
mt: Kien hemm problema waqt li n-network kien qed jiġi ristartjat: 
    
    %s

en: Do you want to try to connect to the Internet now?
mt: Trid tipprova taqbad ma' l-internet issa?

en: Testing your connection...
mt: Qed nittestja l-kollegament...

en: The system is now connected to the Internet.
mt: Is-sistema issa mqabbda ma' l-internet.

en: For security reasons, it will be disconnected now.
mt: Għal raġunijiet ta' sigurtà, issa si jkun skonness.

en: The system does not seem to be connected to the Internet.
    Try to reconfigure your connection.
mt: Is-sistema donnha ma setgħetx taqbad ma' l-internet.
    Ipprova erġa' kkonfigura l-konnessjoni.

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
mt: Wara li jkun lest, aħna nirrikmandaw li tirristartja s-sistema X biex tevita problemi ta' bdil fl-isem tal-kompjuter.

en: Problems occurred during configuration.
    Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration.
mt: Instabu xi problemi waqt il-konfigurazzjoni.
    Ittestja l-konnessjoni permezz ta' net_monitor jew mcc. Jekk il-konnessjoni ma taħdimx, tista' terġa' tħaddem il-konfigurazzjoni.

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
mt: Peress li qed tagħmel installazzjoni minn fuq in-network, in-
    network diġà kkonfigurata.
    Agħfas Ok biex iżżomm din il-konfigurazzjoni, jew ikkanċella biex
    tbiddel il-konfigurazzjoni tal-internet u network.

en: An unexpected error has happened:
    %s
mt: Inqalgħet problema mhux mistennija:
    %s

en: Proxies configuration
mt: Konfigurazzjoni tal-proxies

en: HTTP proxy
mt: Proxy HTTP

en: FTP proxy
mt: Proxy FTP

en: Proxy should be http://...
mt: Proxy mistenni jibda' http://

en: URL should begin with 'ftp:' or 'http:'
mt: URL irid jibda' b' "ftp:" jew "http:"

en: Firewalling configuration detected!
mt: Instabet konfigurazzjoni ta' firewall!

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
mt: Twissija: Instabet konfigurazzjoni eżistenti ta' firewall. Għandek mnejn tkun trid tirranġaha manwalment wara l-installazzjoni.

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
mt: Jekk jogħġbok agħżel l-isem tal-interfaċċja mqabbda mal-internet.
    
    Eżempji:
    		ppp+ għal modem jew konnessjoni DSL, 
    		eth0, jew eth1 għal konnessjoni bil-cable, 
    		ippp+ għal konnessjoni isdn.

en: Insert floppy
mt: Daħħal flopi

en: Insert a FAT formatted floppy in drive %s with %s in root directory and press %s
mt: Daħħal flopi formattjata FAT fid-drajv %s, b' %s fid-direttorju root, u agħfas %s

en: Floppy access error, unable to mount device %s
mt: Problema waqt l-aċċess tal-flopi. Ma nistax nimmonta l-apparat %s.

en: mount failed:
mt: immuntar falla:

en: Extended partition not supported on this platform
mt: Partizzjoni estiża m'hix sapportita fuq din il-pjattaforma

en: You have a hole in your partition table but I can not use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
mt: Għandek toqba fit-tabella tal-partizzjonijiet imma ma nistax nużaha.
    L-unika soluzzjoni hija li tmexxi l-partizzjoni primarja sabiex din it-toqba tkun maġenb il-partizzjoni estiża

en: Restoring from file %s failed: %s
mt: Restawr minn fajl %s falliet: %s

en: Bad backup file
mt: Fajl ta' kopja tas-sigurtà ħażin

en: Error writing to file %s
mt: Problema waqt kitba fil-fajl %s

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
mt: Qed jiġri xi ħaġa ħażina fuq il-ħard disk.
    It-test biex niċċekkja l-integrità tal-informazzjoni falla.
    Dan ifisser li kull ma tikteb fuq id-diska jista' jispiċċa mimli mbarazz.

en: must have
mt: neċessarju

en: important
mt: importanti

en: very nice
mt: tajjeb ħafna

en: nice
mt: tajjeb

en: maybe
mt: forsi

en: (on %s)
mt: (fuq %s)

en: (on this machine)
mt: (fuq dan il-kompjuter)

en: Configured on other machines
mt: Ikkonfigurat fuq kompjuters oħra

en: On CUPS server "%s"
mt: Fuq server CUPS "%s"

en:  (Default)
mt:  (Impliċitu)

en: PDQ - Print, Do not Queue
mt: PDQ - Printja minngħajr kju

en: LPRng - LPR New Generation
mt: LPRng - LPR Ġenerazzjoni Ġdida

en: CUPS - Common Unix Printing System
mt: CUPS - Sistema ta' Printjar Komuni tal-Unix

en: CUPS - Common Unix Printing System (remote server)
mt: CUPS - Sistema ta' Printjar Komuni tal-Unix (server remot)

en: Remote CUPS
mt: CUPS remot

en: Unknown Model
mt: Mudell mhux magħruf

en: Local printer
mt: Printer lokali

en: Remote printer
mt: Printer remot

en: Printer on remote CUPS server
mt: Printer fuq server CUPS remot

en: Printer on remote lpd server
mt: Printer fuq server lpd remot

en: Network printer (TCP/Socket)
mt: Printer tan-network (TCP/socket)

en: Printer on SMB/Windows 95/98/NT server
mt: Printer fuq SMB/Windows 95/98/NT

en: Printer on NetWare server
mt: Printer fuq server NetWare

en: Enter a printer device URI
mt: Daħħal URI tal-printer

en: Pipe job into a command
mt: Għaddi x-xogħol lill kmand

note: Translation of the "(recommended)" in printer driver entries
en: recommended
mt: rakkomandat

en: Unknown model
mt: Mudell mhux magħruf

en: Configured on this machine
mt: Konfigurat fuq dan il-kompjuter

en:  on parallel port #%s
mt:  fuq port parallel #%s

en: , USB printer #%s
mt: , printer USB #%s

en: , USB printer
mt: , printer USB

en: , multi-function device on parallel port #%s
mt: , apparat multi-funzjoni fuq port parallel #%s

en: , multi-function device on a parallel port
mt: , apparat multi-funzjoni fuq port parallel

en: , multi-function device on USB
mt: , apparat multi-funzjoni fuq USB

en: , multi-function device on HP JetDirect
mt: , apparat multi-funzjoni fuq HP JetDirect

en: , multi-function device
mt: , apparat multi-funzjoni

en: , printing to %s
mt: , qed jipprintja fuq %s

en:  on LPD server "%s", printer "%s"
mt:  fuq server LPD "%s", printer "%s"

en: , TCP/IP host "%s", port %s
mt: , server TCP/IP "%s", printer "%s"

en:  on SMB/Windows server "%s", share "%s"
mt:  fuq server Windows "%s", share "%s"

en:  on Novell server "%s", printer "%s"
mt:  fuq server Novell "%s", printer "%s"

en: , using command %s
mt: , bil-kmand %s

en: Parallel port #%s
mt: Port parallel #%s

en: USB printer #%s
mt: Printer USB #%s

en: USB printer
mt: Printer USB

en: Multi-function device on parallel port #%s
mt: Apparat multi-funzjoni fuq port parallel #%s

en: Multi-function device on a parallel port
mt: Apparat multi-funzjoni fuq port parallel

en: Multi-function device on USB
mt: Apparat multi-funzjoni fuq USB

en: Multi-function device on HP JetDirect
mt: Apparat multi-funzjoni fuq HP JetDirect

en: Multi-function device
mt: Apparat multi-funzjoni

en: Prints into %s
mt: Jipprintja fuq %s

en: LPD server "%s", printer "%s"
mt: Server LPD "%s", printer "%s"

en: TCP/IP host "%s", port %s
mt: Server TCP/IP "%s", port "%s"

en: SMB/Windows server "%s", share "%s"
mt: Server Windows/SMB "%s", share "%s"

en: Novell server "%s", printer "%s"
mt: Server Novell "%s", printer "%s"

en: Uses command %s
mt: Juża l-kmand %s

en: Raw printer (No driver)
mt: Printer dirett (bla drajver)

en: Local network(s)
mt: Network(s) lokali

en: Interface "%s"
mt: Interfaċċja "%s"

en: Host %s
mt: Kompjuter %s

en: The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
mt: L-HP LaserJet 1000 għandu bżonn li l-firmware jiġi aġġornat wara li jinxegħel. Niżżel il-pakkett tad-drajver tal-Windows mill-website tal-HP (il-firmware fuq is-CD tal-printer ma jaħdimx) u estratta l-fajl tal-firmware billi tespandi l-fajl EXE permezz tal-programm "unzip" u fittex il-fajl "sihp1000.img". Ikkopja dan il-fajl fid-direttorju "/etc/printer". Hemmhekk jinstab mill-iskript awtomatiku u jiġi nstallat fuq il-printer kull meta jiġi mqabbad u mixgħul.

en: CUPS printer configuration
mt: Konfigurazzjoni tal-printer CUPS

en: Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines.
mt: Hawn tista' tagħżel jekk il-printers imqabbda ma' din il-magna għandhomx ikunu aċċessibbli minn kompjuters remoti, u minn liema kompjuters.

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
mt: Tista' wkoll tiddeċiedi hawn jekk printers fuq magni remoti għandhomx ikunu awtomatikament disponibbli fuq dan il-kompjuter.

en: The printers on this machine are available to other computers
mt: Il-printers fuq dan il-kompjuter huma disponibbli fuq kompjuters oħra

en: Automatically find available printers on remote machines
mt: Sib printers remoti disponibbli awtomatikament

en: Printer sharing on hosts/networks:
mt: Qsim ta' printers fuq kompjuters/networks:

en: Custom configuration
mt: Konfigurazzjoni personalizzata

en: No remote machines
mt: Ebda magni remoti

en: Additional CUPS servers:
mt: Servers CUPS oħrajn:

en: To get access to printers on remote CUPS servers in your local network you only need to turn on the "Automatically find available printers on remote machines" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s).
mt: Biex taċċessa printers fuq servers CUPS remoti fuq in-network lokali għandek bżonn biss tixgħel l-għażla "Sib printers remoti disponibbli awtomatikament"; is-servers CUPS jinformaw lill-kompjuter tiegħek awtomatikament dwar il-printers tagħhom. Il-printers kollha magħrufa lill-kompjuter tiegħek jiġu elenkati fis-sezzjoni "Printers remoti" ta' Printerdrake. Jekk is-server CUPS mhux fin-network lokali tiegħek, tista' ddaħħal l-indirizzi IP u possibbilment in-numru tal-port hawn biex tikseb l-informazzjoni tal-pritner mis-server.

en: Japanese text printing mode
mt: Modalità għal printjar ta' test Ġappuniż

en: Automatic correction of CUPS configuration
mt: Korrezzjoni tal-konfigurazzjoni CUPS awtomatika

en: When this option is turned on, on every startup of CUPS it is automatically made sure that
    
    - if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
    
    - if /etc/cups/cupsd.conf is missing, it will be created
    
    - when printer information is broadcasted, it does not contain "localhost" as the server name.
    
    If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points.
mt: Meta tkun mixgħula din l-għażla, kull darba li jitla' CUPS jiċċekkja awtomatikament li
    
    - jekk huwa nstallat LPD/LPRng, il-fajl /etc/printcap ma jiktibx fuqu CUPS
    
    - jekk /etc/cups/cupsd.conf ma jinstabx, jinħoloq
    
    - meta jiġi mxandar l-informazzjoni dwar il-printers, ma jkunx fih "localhost" bħala isem is-server.
    
    Jekk xi wħud minn dawn il-miżuri joħolqulek problemi, itfi din l-għażla, imma mbgħad oqgħod attent għal dawn l-affarijiet int.

en: Remote CUPS server and no local CUPS daemon
mt: Server CUPS remot u ebda daemon lokali CUPS

en: On
mt: Mixgħul

en: Off
mt: Mitfi

en: In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine.
mt: F'din il-modalità, id-daemon lokali CUPS jiġi mwaqqaf u t-talbiet għall-ipprintjar imorru direttament għand is-server speċifikat taħt. Innota li ma jkunx possibbli tiddefinixxi kjus lokali ta' l-ipprintjar u jekk is-server speċifikat huwa mitfi ma tkunx tista' tipprintja minn dan il-kompjuter.

en: Sharing of local printers
mt: Qsim ta' printers lokali

en: These are the machines and networks on which the locally connected printer(s) should be available:
mt: Dawn huma l-kompjuters u networks fejn għandhom ikunu disponibbli l-printers konnessi lokalment:

en: Add host/network
mt: Żid kompjuter/network

en: Edit selected host/network
mt: Editja l-kompjuter/network magħżul

en: Remove selected host/network
mt: Neħħi kompjuter/network magħżul

en: IP address of host/network:
mt: Indirizz IP tal-kompjuter/network:

en: Choose the network or host on which the local printers should be made available:
mt: Agħżel in-network jew kompjuter fejn trid li l-printers ikunu aċċessibbli:

en: Host/network IP address missing.
mt: Indirizz tal-kompjuter/network nieqes.

en: The entered host/network IP is not correct.
mt: L-indirizz tal-kompjuter/network mhux korrett.

en: Examples for correct IPs:
mt: Eżempji ta' indirizzi korretti:

en: This host/network is already in the list, it cannot be added again.
mt: Dan il-kompjuter/network diġà fil-lista, ma jistax jerġa' jiġi miżjud.

en: Accessing printers on remote CUPS servers
mt: Qed naċċessa printers fuq servers CUPS remoti

en: Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network.
mt: Hawn tista' żżid servers CUPS remoti li trid tuża l-printers tagħhom. Trid tagħmel dan biss jekk is-servers ma jxandrux l-informazzjoni tal-printers tagħhom fuq in-network lokali.

en: Add server
mt: Żid server

en: Edit selected server
mt: Editja server magħżul

en: Remove selected server
mt: Neħħi s-server magħżul

en: Enter IP address and port of the host whose printers you want to use.
mt: Daħħal l-indirizz IP u port tal-kompjuter li trid tuża.

en: If no port is given, 631 will be taken as default.
mt: Jekk ma tagħtix port, jintuża 631 impliċitament.

en: Server IP missing!
mt: IP tas-server nieqes!

en: The entered IP is not correct.
mt: L-IP li daħħalt mhux tajjeb.

en: The port number should be an integer!
mt: In-numru tal-port irid ikun sħiħ!

en: This server is already in the list, it cannot be added again.
mt: Dan is-server diġà fil-lista, ma jistax jerġa jiġi miżjud

en: On, Name or IP of remote server:
mt: Isem jew IP tas-server remot:

en: CUPS server name or IP address missing.
mt: Isem jew indirizz tas-server CUPS nieqes.

en: Reading printer data...
mt: Qed jinqara informazzjoni dwar printer...

en: Restarting CUPS...
mt: Qed jiġi rristartjat CUPS...

en: Select Printer Connection
mt: Agħżel konnessjoni tal-printer

en: How is the printer connected?
mt: Kif inhu mqabbad il-printer?

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
mt: 
    Il-printers li hemm fuq servers CUPS m'għandhomx bżonn jiġu ssettjati minn hawn; dawn il-printers jiġu magħrufa awtomatikament.

en: 
    WARNING: No local network connection active, remote printers can neither be detected nor tested!
mt: 
    Twissija: m'hemmx konnessjoni tan-network lokali. Printers remoti la jistgħu jiġu misjuba anqas ittestjati.

en: Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)
mt: Għarfien awtomatiku tal-printers (lokali, TCP/socket, SMB u URI)

en: Checking your system...
mt: Qed niċċekkja s-sistema...

en: and one unknown printer
mt: u printer wieħed mhux magħruf

en: and %d unknown printers
mt: u %d printers mhux magħrufa

en: The following printers
    
    %s%s
    are directly connected to your system
mt: Dawn il-printers
    %s%shuma mqabbda direttament mal-kompjuter

en: The following printer
    
    %s%s
    are directly connected to your system
mt: Dawn il-printers
    
    %s%s
    huma mqabbda direttament mal-kompjuter

en: The following printer
    
    %s%s
    is directly connected to your system
mt: Dan il-printer
    
    %s%s
    huwa mqabbad direttament mal-kompjuter

en: 
    There is one unknown printer directly connected to your system
mt: 
    Hemm printer wieħed mhux magħruf imqabbad direttament mal-kompjuter

en: 
    There are %d unknown printers directly connected to your system
mt: 
    Hemm %d printers mhux magħrufa imqabbda direttament mal-kompjuter

en: There are no printers found which are directly connected to your machine
mt: Ma nstabu ebda printers imqabbda direttament mal-kompjuter

en:  (Make sure that all your printers are connected and turned on).
mt:  (Aċċerta li l-printers kollha huma mqabbdin u mixgħula).

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
mt: Trid tippermetti printjar fuq il-printers imsemmija fuq jew fuq printers fuq in-network lokali?

en: Do you want to enable printing on printers in the local network?
mt: Trid tippermetti printjar fuq printers fuq in-network lokali?

en: Do you want to enable printing on the printers mentioned above?
mt: Trid tippermetti printjar fuq il-printers imsemmija fuq ?

en: Are you sure that you want to set up printing on this machine?
mt: Żgur li trid tissettja l-ipprintjar fuq dan il-kompjuter?

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
mt: NOTA: Skond il-mudell ta' printer u s-sistema ta' pprintjar, jistgħu jiġu nstallati sa' %d MB ta' softwer.

en: Searching for new printers...
mt: Qed infittex printers ġodda...

en: Found printer on %s...
mt: Sibt printer fuq %s...

en:  on
mt:  fuq

en: Printer model selection
mt: Għażla tal-mudell tal-printer

en: Which printer model do you have?
mt: Liema mudell ta' printer għandek?

en: 
    
    Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.
mt: 
    
    Printerdrake ma setax jiddetermina x'mudell hu l-printer %s. Jekk jogħġbok agħżel mudell mil-lista.

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
mt: Jekk il-printer tiegħek mhux imniżżel, agħżel mudell kompatibbli (ara l-manwal tal-printer) jew wieħed simili.

en: Configuring printer on %s...
mt: Qed nikkonfigura printer fuq %s...

en: Configuring printer "%s"...
mt: Qed nikkonfigura l-printer "%s"...

en: Add a new printer
mt: Żid printer ġdid

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
mt: 
    Merħba għas-saħħar tal-konfigurazzjoni tal-printer
    
    Dan is-saħħar iħallik tinstalla printers lokali jew remoti biex jintużaw minn dan il-kompjuter kif ukoll kompjuters oħra fuq in-network.
    
    Huwa jitolbok l-informazzjoni kollha meħtieġa biex tissettja l-printer u jagħtik aċċess għad-drajvers tal-printers kollha disponibbli, l-għażliet tad-drajver, u t-tipi ta' konnessjoni.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
mt: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda direttament ma' dan il-kompjuter, imqabbda direttament man-network, jew imqabbda ma' kompjuters Windows remoti.
    
    Jekk għandek printer(s) imqabbad direttament ma' dan il-kompjuter, jekk jogħġbok ixgħelu issa u ara li mqabbad sew, ħalli dan jingħaraf awtomatikament. Bl-istess mod, jekk għandek printers man-network jew fuq kompjuters bil-Windows, dawn iridu jkunu mqabbdin u mixgħula.
    
    Innota li l-għarfien awtomatiku ta' printers fuq in-network idum iżjed mill-għarfien ta' printers imqabbda lokalment, għalhekk itfi l-għarfien awtomatiku ta' printers fuq in-network jew fuq Windows jekk taf li m'hemmx.
    
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
mt: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda direttament ma' dan il-kompjuter.
    
    Jekk jogħġbok qabbad u ixgħel il-printers kollha mqabbda ma' dan il-kompjuter sabiex dawn jistgħu jingħarfu.
    
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
mt: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda direttament ma' dan il-kompjuter.
    
    Jekk jogħġbok qabbad u ixgħel il-printers kollha mqabbda ma' dan il-kompjuter sabiex dawn jistgħu jingħarfu.  Printers tan-network ukoll iridu jkunu mixgħula u mqabbdin.
    
    
    Innota li l-għarfien ta' printers fuq in-network idum iżjed mill-għarfien ta' printers imqabbdin dirett ma' dan il-kompjuter. Għalhekk itfi l-għarfien ta' printers bin-network jekk taf li m'hemmx.
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
mt: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda ma' dan il-kompjuter.
    
    Jekk għandek printer(s) imqabbad ma' dan il-kompjuter, jekk jogħġbok ixgħelu issa u ara li mqabbad sew, ħalli dan jingħaraf awtomatikament.
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: Auto-detect printers connected to this machine
mt: Għarfien awtomatiku tal-printers imqabbda lokalment

en: Auto-detect printers connected directly to the local network
mt: Għarfien awtomatiku tal-printers imqabbda direttament man-network

en: Auto-detect printers connected to machines running Microsoft Windows
mt: Għarfien awtomatiku tal-printers imqabbda fuq PCs bil-Microsoft Windows

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the %s Control Center.
mt: 
    Prosit! Il-printer tiegħek issa nstallat u konfigurat!
    
    Tista' tipprintja billi tuża l-kmand "Print" minn ġo l-programmi li tuża (ġeneralment taħt il-menu "Fajl" jew "File").
    
    Jekk tixtieq iżżid, tneħħi jew tibdel l-isem ta' printer, jew jekk tixtieq tbiddel is-setings impliċiti (daqs tal-karta, kwalità eċċ), agħżel "Printer" mis-sezzjoni "Ħardwer" taċ-Ċentru tal-Kontroll %s.

en: Could not install the %s packages!
mt: Ma stajtx ninstalla l-pakkett(i) %s!

en: Skipping Windows/SMB server auto-detection
mt: Qed jinqabeż l-għarfien ta' servers Windows/SMB

en: Printer auto-detection
mt: Għarfien awtomatiku tal-printer

en: Detecting devices...
mt: Qed infittex l-apparat...

en: , network printer "%s", port %s
mt: , printer tan-network "%s", port %s

en: , printer "%s" on SMB/Windows server "%s"
mt: , Printer "%s" fuq server SMB/Windows "%s"

en: Detected %s
mt: Instab %s

en: Printer on parallel port #%s
mt: Printer fuq port parallel #%s

en: Network printer "%s", port %s
mt: Printer tan-network "%s", port %s

en: Printer "%s" on SMB/Windows server "%s"
mt: Printer "%s" fuq server SMB/Windows "%s"

en: Local Printer
mt: Printer lokali

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
mt: Ma nstab ebda printer lokali. Biex tinstalla printer manwalment daħħal l-isem tal-port jew fajl fl-input. (Portijiet paralleli: /dev/lp0=LPT1, /dev/lp1=LPT2 eċċ; printers USB: /dev/usb/lp0, /dev/usb/lp1 eċċ)

en: You must enter a device or file name!
mt: Trid iddaħħal isem ta' port jew fajl!

en: No printer found!
mt: Ebda printer ma nstab!

en: Local Printers
mt: Printers lokali

en: Available printers
mt: Printers disponibbli

en: The following printer was auto-detected.
mt: Dawn huma il-printers misjuba.

en: If it is not the one you want to configure, enter a device name/file name in the input line
mt: Jekk dan m'hux il-printer li ridt tissettja, daħħal isem ta' port/fajl fil-linja tal-input.

en: Alternatively, you can specify a device name/file name in the input line
mt: Alternattivament, agħżel isem ta' port/fajl fil-linja ta' kmand.

en: Here is a list of all auto-detected printers.
mt: Din hija lista tal-printers kollha misjuba awtomatikament.

en: Please choose the printer you want to set up or enter a device name/file name in the input line
mt: Jekk jogħġbok il-printer li trid tissettja, jew daħħal isem ta' port/fajl fil-linja ta' kmand.

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
mt: Jekk jogħġbok agħżel il-printer fejn trid tipprintja, jew agħżel isem ta' apparat/fajl fil-linja ta' kmand

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
mt: Il-konfigurazzjoni tal-printer jaħdem sew awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi konfigurazzjoni personalizzata, ixgħel "Konfigurazzjoni manwali".

en: Currently, no alternative possibility is available
mt: Bħalissa, m'hemm ebda alternattiva

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
mt: Jekk jogħġbok agħżel il-printer li trid tissettja. Il-konfigurazzjoni tal-printer issir awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi konfigurazzjoni personalizzata, ixgħel "Konfigurazzjoni manwali".

en: Please choose the printer to which the print jobs should go.
mt: Jekk jogħġbok agħżel il-printer fejn trid tibgħat ix-xogħol ta' printjar.

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
mt: Jekk jogħġbok agħżel il-port fejn huwa mqabbad il-printer, jew agħżel isem ta' port/fajl fil-linja ta' kmand.

en: Please choose the port that your printer is connected to.
mt: Jekk jogħġbok agħżel il-port ma' fejn hu mqabbad il-printer.

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
mt:  (portijiet paralleli: /dev/lp0, /dev/lp1 huma ekwivalenti għal LPT1, LPT2 eċċ. L-ewwel printer USB = /dev/usb/lp0, it-tieni printer USB = /dev/usb/lp1 eċċ )

en: You must choose/enter a printer/device!
mt: Trid tagħżel/iddaħħal printer/apparat!

en: Aborting
mt: Qed jitwaqqaf

en: Remote lpd Printer Options
mt: Għażliet għal printer lpd remot

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
mt: Biex tipprintja fuq printer remot lpd, trid tagħti l-isem tal-kompjuter kif ukoll l-isem tal-printer fuq dak is-server.

en: Remote host name
mt: Isem tal-kompjuter remot

en: Remote printer name
mt: Isem tal-printer remot

en: Remote host name missing!
mt: Isem tal-kompjuter remot nieqes!

en: Remote printer name missing!
mt: Isem tal-printer remot nieqes!

en: Information
mt: Informazzjoni

en: Detected model: %s %s
mt: Mudell misjub: %s %s

en: Scanning network...
mt: Qed infittex fuq in-network...

en: , printer "%s" on server "%s"
mt: , printer "%s" fuq server "%s"

en: Printer "%s" on server "%s"
mt: Printer "%s" fuq server "%s"

en: SMB (Windows 9x/NT) Printer Options
mt: Għażliet għal printer SMB (Windows 9x/NT)

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
mt: Biex tipprintja fuq printer SMB, trid tagħti l-isem SMB tal-kompjuter (li
    jista' jkun differenti mill-isem TCP/IP), u possibbilment l-indirizz IP tiegħu, kif ukoll l-isem tal-printer (share name) li trid taqbad miegħu, u possibbilment l-isem u password tal-user li trid taqbad bih, u informazzjoni dwar il-workgroup.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
mt:  Jekk il-printer meħtieġ instab awtomatikament, sempliċiment għażlu mil-lista u żid il-user, password u/jew workgroup jekk meħtieġa.

en: SMB server host
mt: Isem tal-kompjuter SMB

en: SMB server IP
mt: IP tas-server SMB

en: Share name
mt: Isem tal-printer (share)

en: Auto-detected
mt: Magħruf awtomatikament

en: Either the server name or the server's IP must be given!
mt: Trid tagħti l-isem jew l-indirizz IP tas-server!

en: Samba share name missing!
mt: Isem tal-printer (share name) nieqes!

en: SECURITY WARNING!
mt: TWISSIJA TA' SIGURTÀ!

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
mt: Int se tissettja l-ipprintjar fuq kont tal-Windows li jeħtieġ password. Minħabba difett fl-arkitettura tal-klijent Samba, il-password titpoġġa b'mod li jinqara' fuq il-linja ta' kmand li juża dan il-klijent biex tibgħat ix-xogħol lis-server Windows. Għalhekk huwa possibbli għal kull user li hemm fuq dan il-kompjuter li jara l-password billi juża kmand bħal "ps auxwww".
    
    Aħna nirrakkomandaw li tagħmel użu minn waħda minn dawn l-alternattivi (fil-każi kollha trid taċċerta li l-kompjuters fuq in-network lokali biss għandhom aċċess għas-server Windows, per eżempju permezz ta' firewall):
    
    Uża kont minngħajr password fuq is-server Windows, per eżempju l-kont "GUEST" jew kont speċjali dedikat għall-ipprintjar. Tneħħix il-protezzjoni tal-password mall-kont personali jew dak tal-amministratur.
    
    Issettja s-server tal-Windows biex jagħmel dan il-printer disponibbli taħt il-protokoll LPD, imbagħad issettja l-printer fuq dan il-kompjuter permezz tat-tip ta' konnessjoni "%s" minn PrinterDrake.

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
mt: Issettja s-server tal-Windows biex jagħmel dan il-printer disponibbli taħt il-protokoll IPP u ssettja l-ipprintjar minn din il-magna biex tuża l-konnessjoni tip "%s" minn Printerdrake.

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
mt: Qabbad il-printer ma' server Linux u ħalli kompjuters Windows jużawh bħala klijent.
    
    Trid tkompli tissettja dan il-printer kif qed tagħmel issa?

en: NetWare Printer Options
mt: Għażliet tal-printer NetWare

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
mt: Biex tipprintja fuq printer NetWare, trid tagħti l-isem NetWare tal-kompjuter (li
    jista' jkun differenti mill-isem TCP/IP), kif ukoll l-isem tal-kju ta' printjar li tixtieq tuża, u isem u password tal-user jekk hemm bżonn.

en: Printer Server
mt: Server tal-printer

en: Print Queue Name
mt: Isem tal-Kju tal-Ipprintjar

en: NCP server name missing!
mt: Isem tas-server NCP nieqes!

en: NCP queue name missing!
mt: Isem tal-kju NCP nieqes!

en: , host "%s", port %s
mt: , kompjuter "%s", port %s

en: Host "%s", port %s
mt: Kompjuter "%s", port %s

en: TCP/Socket Printer Options
mt: Għażliet Printer TCP/Socket

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
mt: Agħżel wieħed mill-printers misjuba mil-lista, jew daħħal isem jew indirizz IP ta' kompjuter, u jekk trid, n-numru tal-port (impliċitament 9100) fil-kaxex.

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
mt: Biex tipprintja fuq printer TCP jew socket, trid tissupplixxi l-isem jew IP tal-printer u possibbilment in-numru tal-port. Fuq servers HP JetDirect in-numru tal-port ġeneralment huwa 9100. Fuq printers oħra dan ivarja. Iċċekkja l-manwal tal-printer.

en: Printer host name or IP missing!
mt: Isem jew indirizz tal-printer nieqes!

en: Printer host name or IP
mt: Isem jew indirizz tal-printer

en: Refreshing Device URI list...
mt: Qed nerġa' naqra' l-lista ta' URIs ta' tagħmir...

en: Printer Device URI
mt: URI tal-printer

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
mt: Tista' tispeċifika l-URI tal-printer direttament. Il-URI irid isegwi l-format tal-CUPS jew tal-Foomatic. Innota li mhux kull tip ta' URI huwa aċċettat mill-ispoolers kollha.

en: A valid URI must be entered!
mt: Trid iddaħħal URI validu!

en: Pipe into command
mt: Ippajpja għal ġo kmand

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
mt: Hawn tista' tispeċifika linja ta' kmand arbitrarja li x-xogħol ta' pprintjar jiġi ppajpjat fiha minflok jintbagħat direttament lill-printer.

en: Command line
mt: Linja tal-kmand

en: A command line must be entered!
mt: Trid iddaħħal linja ta' kmand!

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
mt: Il-printer tiegħek huwa tagħmir multi-funzjoni minn HP jew Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 bi skaner, DeskJet 450, Sony IJP-V100), HP PhotoSmart jew HP LaserJet 2200?

en: Installing %s package...
mt: Qed ninstalla pakkett %s...

en: Only printing will be possible on the %s.
mt: Printjar possibbli biss fuq %s.

en: Checking device and configuring %s...
mt: Qed niċċekkja t-tagħmir u nissettja %s...

en: Installing SANE packages...
mt: Qed ninstalla pakketti SANE...

en: Scanning on the %s will not be possible.
mt: L-iskannjar fuq %s ma jkun possibbli.

en: Installing mtools packages...
mt: Qed ninstalla pakketti mtools...

en: Photo memory card access on the %s will not be possible.
mt: Aċċess għall-kard tal-memorja fuq %s mhux se jkun possibbli.

en: Scanning on your HP multi-function device
mt: Skannjar fuq l-apparat multi-funzjoni HP

en: Photo memory card access on your HP multi-function device
mt: Aċċess għall-kard tal-memorja fuq tagħmir multi-funzjonali HP

en: Making printer port available for CUPS...
mt: Qed nissettja l-port tal-printer aċċessibbli għal CUPS...

en: Reading printer database...
mt: Qed jinqara d-database ta' printers

en: Enter Printer Name and Comments
mt: Daħħal isem il-printer u kummenti

en: Name of printer should contain only letters, numbers and the underscore
mt: L-isem tal-printer jista' jkun fih biss ittri, numri, u underscore

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
mt: il-printer "%s" diġà jeżisti. 
    Trid tħassar il-konfigurazzjoni tiegħu?

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
mt: Kull printer jeħtieġ isem, (eż, "printer"). Id-deskrizzjoni u post m'għandhomx bżonn jimtlew. Huma kummenti għall-użu tiegħek.

en: Name of printer
mt: Isem tal-printer

en: Description
mt: Deskrizzjoni

en: Location
mt: Post

en: Preparing printer database...
mt: Qed nipprepara d-database tal-printers...

en: Your printer model
mt: Il-mudell tal-printer tiegħek

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
mt: Printerdrake qabbel l-isem tal-mudell li jirriżulta mill-għarfien tal-printer mal-mudelli llistjati fid-database sabiex isib l-aħjar għażla. Din l-għażla tista' tkun ħażina, speċjalment jekk il-printer anqas jinsab f'din il-lista. Għalhekk iċċekkja jekk din l-għażla hix tajba u agħfas "Dan il-mudell huwa tajjeb" jekk iva, u jekk le agħfas "Agħżel mudell manwalment" biex tagħżel mudell inti fl-iskrin li jmiss.
    
    Għall-printer tiegħek Printerdrake sab:
    
    %s

en: The model is correct
mt: Dan il-mudell huwa tajjeb

en: Select model manually
mt: Agħżel mudell manwalment

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or "Raw printer" is highlighted.
mt: 
    
    
    Jekk jogħġbok iċċekkja li PrinterDrake sab il-mudell tal-printer tiegħek sew. Jekk il-mudell immarkat m'huwiex tajjeb jew qiegħed fuq "printer dirett" ara jekk issibx il-mudell int fil-lista.

en: Install a manufacturer-supplied PPD file
mt: Installa fajl PPD ipprovdut mill-manufattur

en: Every PostScript printer is delivered with a PPD file which describes the printer's options and features.
mt: Kull printer PostScript jiġi b'fajl PPD li jiddeskrivi l-għażliet u karatteristiċi tal-printer

en: This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer.
mt: Dan il-fajl normalment jinsab x'imkien fuq is-CD mad-drajvers tal-Windows u Mac li jingħata mal-printer.

en: You can find the PPD files also on the manufacturer's web sites.
mt: Tista' ssib dawn il-fajls ukoll fuq is-sit tal-web tal-manufattur.

en: If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too.
mt: Jekk għandek Windows installat fuq il-kompjuter tista' ssib il-fajl PPD fil-partizzjoni tal-Windows ukoll.

en: Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware
mt: Jekk tinstalla u tuża l-fajl PPD meta tissettja l-printer ikollok l-għażliet kollha li jissapportja l-printer disponibbli.

en: Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer.
mt: Hawn tista' tagħżel il-fajl PPD li għandu jiġi nstallat fuq il-kompjuter. Dan jintuża biex jiġi ssettjat il-printer.

en: Install PPD file from
mt: Installa fajl PPD minn

en: Floppy Disk
mt: Diska flopi

en: Other place
mt: Post ieħor

en: Select PPD file
mt: Agħżel fajl PPD

en: The PPD file %s does not exist or is unreadable!
mt: Il-fajl PPD %s ma jeżistix jew ma jistax jinqara!

en: The PPD file %s does not conform with the PPD specifications!
mt: Il-fajl PPD %s mhux konformi ma' l-ispeċifikazzjonijiet PPD!

en: Installing PPD file...
mt: Qed ninstalla fajl PPD...

en: OKI winprinter configuration
mt: Konfigurazzjoni OKI WinPrinter

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
mt: Qed tikkonfigura "OKI laser winprinter". Dawn il-printers jużaw protokoll ta' kommunikazzjoni speċjali u għalhekk jaħdmu biss meta jkunu mqabbdin ma' l-ewwel port parallel. Meta l-printer ikun imqabbad ma' port ieħor jew ma' print server, jekk jogħġbok l-ewwel qabbdu ma' l-ewwel port parallel qabel tipprintja paġna biex tittestja, inkella l-printer ma jaħdimx. It-tip ta' konnessjoni jiġi injorat mid-drajver.

en: Lexmark inkjet configuration
mt: Konfigurazzjoni inkjet Lexmark

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
mt: Il-drajvers tal-printer ipprovduti minn Lexmark jissapportjaw biss printers lokali, mhux printers fuq magni remoti jew print servers. Jekk jogħġbok qabbad il-printer ma' port lokali jew ikkonfigurah fuq il-magna fejn qiegħed imqabbad.

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
mt: Biex tkun tista' tipprintja bl-inkġet Lexmark u b'din il-konfigurazzjoni, trid id-drajver tal-printer provdut minn Lexmark (http://www.lexmark.com) Klikkja l-buttuna "Drivers", imbagħad agħżel il-mudell u "Linux" bħala sistema operattiva. Id-drajvers jiġu bħala pakketti RPM jew skritti tax-shell b'installazzjoni grafika. M'għandekx bżonn tagħmel l-installazzjoni grafika. Ikkanċella malli tlesti l-qbil tal-liċenzja, imbagħad ipprintja l-paġni ta' allinjament tal-printhead b' "lexmarkmaintain" u irranġa s-setings tal-allinjament b'dan il-programm.

en: Lexmark X125 configuration
mt: Konfigurazzjoni Lexmark X125

en: The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to.
mt: Il-drajvers tal-printer ipprovduti minn Lexmark jissapportjaw biss printers imqabbdin lokalment permezz ta' USB, mhux printers fuq magni remoti jew print servers. Jekk jogħġbok qabbad il-printer ma' port lokali jew ikkonfigurah fuq il-magna fejn qiegħed imqabbad.

en: Samsung ML/QL-85G configuration
mt: Konfigurazzjoni Samsung ML/QL-85G

en: The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to.
mt: Il-drajvers tal-printer ipprovduti minn Lexmark jissapportjaw biss printers imqabbdin lokalment fuq l-ewwel port parallel, mhux printers fuq magni remoti, print servers jew portijiet paralleli oħrajn. Jekk jogħġbok qabbad il-printer ma' port lokali jew ikkonfigurah fuq il-magna fejn qiegħed imqabbad.

en: Canon LBP-460/660 configuration
mt: Konfigurazzjoni Canon LBP-460/660

en: Firmware-Upload for HP LaserJet 1000
mt: Upload ta' firmware għal HP LaserJet 1000

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
mt: Setings impliċiti tal-printer
    
    Aċċerta li d-daqs tal-paġna u t-tip ta' inka/ipprintjar (jekk hemm) kif ukoll il-konfigurazzjoni tal-ħardwer tal-printer (memorja, unità dupleks, kxaxen ekstra) huma ssettjati sew. Innota li jekk tagħżel kwalità/reżoluzzjoni għolja ħafna l-ipprintjar jista' jdum ħafna iżjed u/jew juża iżjed inka.

en: Printer default settings
mt: Għażla impliċiti tal-printer

en: Option %s must be an integer number!
mt: Għażla %s trid tkun numru sħiħ!

en: Option %s must be a number!
mt: Għażla %s trid tkun numru!

en: Option %s out of range!
mt: Għażla %s barra mil-limiti!

en: Do you want to set this printer ("%s")
    as the default printer?
mt: Tixtieq tissettja dan il-printer ("%s")
    bħala l-printer impliċitu?

en: Test pages
mt: Paġni biex tittestja

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
mt: Jekk jogħġbok agħżel il-paġni li trid tipprintja biex tittestja.
    Nota: Il-paġna fotografika tista' tieħu ħafna ħin biex tlesti, u fuq laser printers bi ftit memorja tista' anqas tipprintja. F'ħafna każi huwa biżżejjed li tipprintja l-paġna standard.

en: No test pages
mt: Ebda paġni ta' testjar

en: Print
mt: Printja

en: Standard test page
mt: Paġna standard

en: Alternative test page (Letter)
mt: Paġna alternattiva (Letter)

en: Alternative test page (A4)
mt: Paġna alternattiva (A4)

en: Photo test page
mt: Paġna fotografika

en: Do not print any test page
mt: Tipprintjax paġna għal test

en: Printing test page(s)...
mt: Qed nipprintja paġna/i ta' test...

en: Skipping photo test page.
mt: Qed jinqabeż it-test ta' paġna fotografika.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
mt: Il-paġna/i intbagħatu fuq il-printer.
    Jista' jgħaddi xi ftit ħin qabel jibda' l-printjar.
    Status tal-printjar:
    %s

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
mt: Il-paġna/i intbagħatu fuq il-printer.
    Jista' jgħaddi xi ftit ħin qabel jibda' l-printjar.

en: Did it work properly?
mt: Ħadem sewwa?

en: Raw printer
mt: Printer dirett

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
mt: Biex tipprintja fajl mil-linja ta' kmand (terminal), tista' tuża l-kmand "%s <fajl>" jew programm grafiku: "upp <fajl>" jew "kprinter <fajl>". Il-programmi grafiċi jħalluk tagħżel il-printer jew tbiddel is-setings faċilment.

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
mt: Dan il-kmand jista' wkoll jintuża fl-element "Printing command" tal-window tal-ipprintjar ta' ħafna programmi, imma ddaħħalx l-isem tal-fajl hemm għax dak jissupplixxih il-programm.

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
mt: 
    Il-kmand "%s" iħallik ukoll tbiddel is-setings għal xogħol ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "%s <file>".

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
mt: Biex issir taf dwar l-għażliet disponibbli għal dan il-printer, aqra l-lista li tidher taħt, jew agħfas il-buttuna "Lista ta' għażliet tal-printer".%s%s%s.

en: Here is a list of the available printing options for the current printer:
mt: Dawn huma l-għażliet disponibbli għal dan il-printer:

en: To print a file from the command line (terminal window) use the command "%s <file>".
mt: Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand "%s <fajl>".

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
mt: Dan il-kmand jista' wkoll jintuża fl-element "Printing command" tal-window tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax dak jissupplixxih il-programm.

en: To get a list of the options available for the current printer click on the "Print option list" button.
mt: Biex tikseb lista ta' għażliet disponibbli għal dan il-printer agħfas il-buttuna "Lista ta' għażliet tal-printer".

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
mt: Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand "%s <fajl>" jew "%s <fajl>".

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
mt: Tista' wkoll tuża l-interfaċċja grafika "xpdq" biex tissettja l-għażliet u biex tieħu ħsieb xogħlijiet ta' printjar.
    Jekk qed tuża l-KDE bħala ambjent tad-desktop, għandek issib ikona fuq id-desktop li tħallik twaqqaf il-printjar kollu, per eżempju jekk jeħlulek il-karti.

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
mt: 
    Il-kmandijiet "%s" u "%s" iħalluk ukoll tbiddel is-setings għal xogħol ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "%s <file>".

en: Printing/Scanning/Photo Cards on "%s"
mt: Kards ta' printjar/skannjar/fotografija fuq "%s"

en: Printing/Scanning on "%s"
mt: Printjar/skannjar fuq "%s"

en: Printing/Photo Card Access on "%s"
mt: Printjar/kard fotografija fuq "%s"

en: Printing on the printer "%s"
mt: Printjar fuq printer "%s"

en: Print option list
mt: Lista ta' għażliet tal-printer

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    You do not need to run "scannerdrake" for setting up scanning on this device, you only need to use "scannerdrake" if you want to share the scanner on the network.
mt: It-tagħmir multi-funzjonali ġie konfigurat awtomatikament biex ikun jista' jiskannja. Issa tista' tiskannja bil-programm "scanimage " ("scanimage -d hp:%s" biex tispeċifika l-iskaner jekk għandek iżjed minn wieħed) mil-linja ta' kmand, inkella bil-programmi grafiċi "xscanimage" jew "xsane". Jekk qed tuża l-GIMP, tista' tiskannja wkoll billi tuża l-menu "File / Acquire". Tista' tuża "man scanimage" fuq il-linja tal-kmand għal iżjed tagħrif.
    
    M'għandekx bżonn tħaddem "scannerdrake" biex tissettja l-iskannjar b'dan it-tagħmir; għandek bżonn "scannerdrake" biss jekk trid taqsam dan l-iskaner ma' ħaddieħor fuq in-network.

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
mt: Il-printer ġie konfigurat awtomatikament biex jagħtik aċċess għall-"photo card drive" mill-PC. Issa tista' taċċessa l-photo cards mill-programm grafiku "MToolsFM" (Menu: Applikazzjonijiet -> Għodda tal-fajls -> Maniġġjar tal-fajls MTools) jew mil-linja tal-kmand "mtools" (daħħal il-kmand "man mtools" għal iżjed tagħrif). Issib il-filesystem tal-kard taħt l-ittra "p:", jew l-ittri sussegwenti jekk għandek iżjed minn printer wieħed b'photo card. F' "MToolsFM" tista' taqleb bejn ittri tad-drajv mill-kaxxa ta' fuq fil-lemin tal-lista ta' fajls.

en: Transfer printer configuration
mt: Ittrasferixxi konfigurazzjoni tal-printer

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
mt: Tista' tikkopja l-konfigurazzjoni tal-printer minn spooler %s għal %s, l-ispooler attwali. L-informazzjoni kollha tal-konfigurazzjoni (isem tal-printer, deskrizzjoni, post, tip ta' konnessjoni u setings impliċiti) jiġu trasferiti, imma xogħlijiet eżistenti ta' printjar ma jiġux trasferiti.
    Mhux il-kjus kollha jistgħu jiġu trasferiti minħabba dawn ir-raġunijiet:

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
mt: CUPS ma jaċċettax printers fuq servers Novell jew servers li jibgħatu d-data lill kmand "free format".

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
mt: PDQ jaċċetta biss printers lokali, printers remoti LPD, u printers Socket/TCP.

en: LPD and LPRng do not support IPP printers.
mt: LPD u LPRng ma jaċċettawx printers IPP.

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
mt: Apparti minn dan, kjus li ma nħalqux b'dan il-programm jew "foomatic-configure" ma jistgħux jiġu trasferiti.

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
mt: 
    Ukoll, printer ikkonfigurati bil-fajls PPD provduti mill-manufatturi jew bi drajvers CUPS nativi ma jistgħux jiġu trasferiti.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
mt: 
    Immarka l-printers li trid tittrasferixxi u klikkja "Ittrasferixxi".

en: Do not transfer printers
mt: Tittrasferixxix printers

en: Transfer
mt: Ittrasferixxi

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
mt: Printer jismu "%s" diġà jeżisti taħt %s.
    Klikkja "Ittrasferixxi" biex tħassar li hemm.
    Tista' wkoll tagħtih isem ġdid jew taqbżu.

en: New printer name
mt: Isem tal-printer ġdid

en: Transferring %s...
mt: Qed nittrasferixxi %s...

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
mt: Int ittrasferixxejt il-printer li kien impliċitu qabel ("%s"). Trid li jerġa' jkun il-printer impliċitu taħt is-sistema l-ġdida %s?

en: Refreshing printer data...
mt: Qed nerġa' naqra' l-printers...

en: Starting network...
mt: Qed nibda' n-network...

en: Configure the network now
mt: Ikkonfigura n-network issa

en: Network functionality not configured
mt: Funzjonalità tan-network m'hix ikkonfigurata

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
mt: Qed tipprova tissettja printer remot. Dan għandu bżonn aċċess għan-network, imma s'issa ma ġietx issettjata n-network. Jekk tkompli minngħajr network, għandu mnejn ma tkunx tuża l-printer li qed tissettja issa. Kif trid tipproċedi?

en: Go on without configuring the network
mt: Kompli kkonfigura mingħajr network

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the %s Control Center, section "Hardware"/"Printer"
mt: Il-konfigurazzjoni tan-network li saret waqt l-installazzjoni ma tistax tittella' issa. Jekk jogħġbok iċċekkja jekk in-network isirx aċċessibbli wara li tirristartja s-sistema, imbgħad ikkoreġi l-konfigurazzjoni miċ-Ċentru tal-Kontroll %s, taħt is-sezzjoni "Network u Internet"/"Konnessjoni", u wara ssettja l-printer, mill-istess Ċentru tal-Kontroll %s, sezzjoni "Ħardwer"/"Printer".

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
mt: L-aċċess għan-network ma kienx qed jaħdem u ma setax jittella'. Jekk jogħġbok iċċekkja l-konfigurazzjoni tal-ħardwer, imbagħad erġa' pprova kkonfigura l-printer remot.

en: Restarting printing system...
mt: Qed nirristartja s-sistema ta' printjar...

en: high
mt: għoli

en: paranoid
mt: paranojku

en: Installing a printing system in the %s security level
mt: Qed ninstalla sistema ta' printjar taħt livell ta' sigurtà %s

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
mt: Se tinstalla s-sistema ta' printjar %s fuq sistema li għandha l-livell ta' sigurtà %s.
    
    Din is-sistema ta' printjar tħaddem daemon (proċess fl-isfond) li jistenna' xogħlijiet ta' printjar u jieħu ħsiebhom. Dan id-daemon huwa wkoll aċċessibbli minn kompjuters oħra fuq in-network għalhekk huwa possibbli għal attakki fuqu. Għalhekk, id-daemons li jittellgħu f'dan il-livell huma ftit u magħżula sew.
    
    Żgur li trid tikkonfigura l-ipprintjar fuq dan il-kompjuter?

en: Starting the printing system at boot time
mt: Qed nistartja s-sistema ta' printjar waqt ix-xegħil

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
mt: Is-sistema ta' printjar (%s) mhux se jittella' awtomatikament meta tixgħel il-kompjuter.
    
    Huwa possibbli t-tlugħ awtomatiku ġie mitfi meta bdilt il-livell ta' sigurtà ogħla, peress li s-sistema ta' printjar huwa punt fejn possibbilment isiru attakki.
    
    Trid li terġa' tixgħel it-tlugħ awtomatiku tas-sistema ta' printjar?

en: Checking installed software...
mt: Qed niċċekkja s-softwer li hemm installat...

en: Removing %s...
mt: Qed inneħħi %s...

en: Could not remove the %s printing system!
mt: Ma stajtx inneħħi s-sistema tal-ipprintjar %s!

en: Installing %s...
mt: Qed ninstalla %s...

en: Could not install the %s printing system!
mt: Ma stajtx ninstalla s-sistema tal-ipprintjar %s!

en: In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine.
mt: F'din il-modalità m'hemmx sistema ta' pprintjar lokali. It-talbiet kollha għall-ipprintjar imorru direttament fuq is-server speċifikat isfel. Innota li hekk mhux possibbli tiddefinixxi kjus ta' pprintjar lokali u jekk is-server speċifikat huwa mitfi ma tkunx tista' tipprintja minn dan il-kompjuter.

en: Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click "Quit" otherwise.
mt: Daħħal isem il-kompjuter jew l-IP tas-server CUPS u kklikkja OK jekk trid tuża din il-modalità, inkella agħfas "Oħroġ".

en: Name or IP of remote server:
mt: Isem jew IP tas-server remot:

en: Setting Default Printer...
mt: Qed nissettja printer impliċitu...

en: Local CUPS printing system or remote CUPS server?
mt: Sistema ta' pprintjar CUPS lokali jew server CUPS remot?

en: The CUPS printing system can be used in two ways:
mt: Is-sistema ta' pprintjar CUPS tista' tintuża f'żewġ modi:

en: 1. The CUPS printing system can run locally.
mt: 1. Is-sistema ta' pprintjar CUPS tista' titħaddem lokalment.

en: Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered.
mt: Hekk jistgħu jintużaw printers imqabbdin lokalment, filwaqt li printers remoti fuq servers CUPS oħrajn jinstabu awtomatikament.

en: Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened.
mt: L-iżvantaġġi ta' dan il-metodu huma li hemm bżonn iżjed riżorsi fuq il-kompjuter lokali; iżjed pakketti ta' softwer iridu jiġu nstallati, il-proċess tal-CUPS irid jitħaddem kontinwament u jieħu xi ftit memorja, u l-port tal-IPP (port 631) huwa miftuħ.

en: 2. All printing requests are immediately sent to a remote CUPS server.
mt: 2. It-talbiet għall-ipprintjar kollha jintbagħtu fuq server CUPS remot.

en: Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used.
mt: Hekk l-użu ta' riżorsi lokali huwa minimizzat. Ebda proċess CUPS ma jitħaddem, ebda port ma jinfetaħ, ma jiġux installati pakketti biex jissettjaw kjus ta' l-ipprintjar lokali, u għalhekk jintużaw inqas memorja u spazju fuq id-diska.

en: Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine.
mt: L-iżvantaġġ huwa li mhux possibbli tissettja kjus lokali u jekk is-server ikun mitfi ma jkun possibbli tipprintja xejn minn fuq dan il-kompjuter.

en: How should CUPS be set up on your machine?
mt: Kif tridu jkun issettjat CUPS fuq il-kompjuter tiegħek?

en: Remote server, specify Name or IP here:
mt: Server remot; speċifika l-isem jew IP hawn:

en: Local CUPS printing system
mt: Sistema ta' l-ipprintjar CUPS lokali

en: Select Printer Spooler
mt: Agħżel "spooler" tal-printer

en: Which printing system (spooler) do you want to use?
mt: Liema sistema ta' printjar (spooler) tixtieq tuża?

en: Failed to configure printer "%s"!
mt: Ma stajtx nikkonfigura l-printer "%s"!

en: Installing Foomatic...
mt: Qed ninstalla Foomatic...

en: Could not install %s packages, %s cannot be started!
mt: Ma setgħux jiġu nstallati l-paketti %s. %s ma jistax jitħaddem!

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
mt: Dawn huma l-printers ikkonfigurati. Klikkja-doppju fuq printer biex tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew tara informazzjoni dwaru.

en: Display all available remote CUPS printers
mt: Uri lista tal-printers kollha CUPS remoti disponibbli

en: Refresh printer list (to display all available remote CUPS printers)
mt: Erġa' aqra l-lista ta' printers (biex issib printers remoti CUPS)

en: CUPS configuration
mt: Konfigurazzjoni CUPS

en: Change the printing system
mt: Ibdel is-sistema tal-ipprintjar

en: Normal Mode
mt: Modalità normali

en: Expert Mode
mt: Modalità esperti

en: Printer options
mt: Għażliet tal-printer

en: Modify printer configuration
mt: Biddel il-konfigurazzjoni tal-printer

en: Printer %s%s
    What do you want to modify on this printer?
mt: Printer %s%s
    Xi trid tagħmel b'dan il-printer?

en: This printer is disabled
mt: Din is-servizz ta' printer mitfi

en: Do it!
mt: Agħmel dan!

en: Printer connection type
mt: Tip ta' konnessjoni tal-printer

en: Printer name, description, location
mt: Isem, deskrizzjoni u fejn qiegħed il-printer

en: Printer manufacturer, model, driver
mt: Ditta, mudell u drajver tal-printer

en: Printer manufacturer, model
mt: Ditta u mudell tal-printer

en: Set this printer as the default
mt: Nissettja dan bħala l-printer impliċitu

en: Enable Printer
mt: Ixgħel servizz ta' printer

en: Disable Printer
mt: Itfi servizz ta' printer

en: Print test pages
mt: Nipprintja paġni biex nittestja

en: Learn how to use this printer
mt: Tgħallem kif tuża dan il-printer

en: Remove printer
mt: Neħħi printer

en: Removing old printer "%s"...
mt: Qed inneħħi l-printer antik "%s"...

en: Printer "%s" is now enabled.
mt: Printer "%s" issa mixgħul

en: Printer "%s" is now disabled.
mt: Printer "%s" issa mitfi

en: Do you really want to remove the printer "%s"?
mt: Żgur li trid tneħħi l-printer "%s"?

en: Removing printer "%s"...
mt: Qed jitneħħa l-printer "%s"...

en: Default printer
mt: Printer impliċitu

en: The printer "%s" is set as the default printer now.
mt: Il-printer "%s" issa ssettjat bħala printer impliċitu

en: Can not add a partition to _formatted_ RAID %s
mt: Ma nistax inżid partizzjoni fuq RAID _formattjat_ %s

en: Not enough partitions for RAID level %d
mt: M'hemmx biżżejjed partizzjonijiet għal RAID livell %d

en: Could not create directory /usr/share/sane/firmware!
mt: Ma stajtx noħloq direttorju /usr/share/sane/firmware!

en: Could not create link /usr/share/sane/%s!
mt: Ma stajtx noħloq link /usr/share/sane/%s!

en: Could not copy firmware file %s to /usr/share/sane/firmware!
mt: Ma stajtx nikkopja l-fajl tal-formware %s għal /usr/share/sane/firmware!

en: Could not set permissions of firmware file %s!
mt: Ma stajtx nissettja l-permessi tal-fajl ta' firmware %s!

en: Could not install the packages needed to share your scanner(s).
mt: Ma stajtx ninstalla l-pakketti meħtieġa biex naqsam l-iskaners

en: Your scanner(s) will not be available for non-root users.
mt: L-iskaners mhux se jkunu disponibbli għal utenti apparti root.

en: Accept/Refuse bogus IPv4 error messages.
mt: Aċċetta/iċħad messaġġi fittizji ta' żbalji IPv4.

en:  Accept/Refuse broadcasted icmp echo.
mt: Aċċetta/iċħad icmp echo imxandra.

en:  Accept/Refuse icmp echo.
mt: Aċċetta/iċħad icmp echo.

en: Allow/Forbid autologin.
mt: Ippermetti/iċħad autologin.

note: -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
en: If set to "ALL", /etc/issue and /etc/issue.net are allowed to exist.
    
    If set to NONE, no issues are allowed.
    
    Else only /etc/issue is allowed.
mt: Jekk tissettja għal "KOLLHA", /etc/issue u /etc/issue.net jitħallew jeżistu.
    
    Jekk tissettja għal "EBDA", ma jitħallewx issues
    
    Altrimenti jitħalla biss /etc/issue

en: Allow/Forbid reboot by the console user.
mt: Ippermetti/iċħad reboot mill-utent fuq il-konsol.

en: Allow/Forbid remote root login.
mt: Ippermetti/iċħad reboot remot mill-utent root.

en: Allow/Forbid direct root login.
mt: Ippermetti/iċħad login dirett ta' root.

en: Allow/Forbid the list of users on the system on display managers (kdm and gdm).
mt: Ippermetti/iċħad il-lista ta' utenti tas-sistema fuq id-display managers (kdm u gdm)

en: Allow/forbid to export display when
    passing from the root account to the other users.
    
    See pam_xauth(8) for more details.'
mt: Ippermetti/iċħad li tesporta display meta tgħaddi
    mill-kont root għal users oħrajn.
    
    Ara pam_xauth(8) għal iżjed tagħrif.

en: Allow/Forbid X connections:
    
    - ALL (all connections are allowed),
    
    - LOCAL (only connection from local machine),
    
    - NONE (no connection).
mt: Ippermetti/iċħad konnessjonijiet X:
    
     - KOLLHA (konnessjonijiet kollha permessi),
    
     - LOKALI (konnessjonijiet biss mill-kompjuter lokali),
    
     - EBDA (ebda konnessjoni).

en: The argument specifies if clients are authorized to connect
    to the X server from the network on the tcp port 6000 or not.
mt: L-argument jispeċifika jekk klijenti humiex awtorizzati jaqbdu
    mas-serevr X min-network fuq il-port tat-TCP 6000 jew le.

note: -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
en: Authorize:
    
    - all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to "ALL",
    
    - only local ones if set to "LOCAL"
    
    - none if set to "NONE".
    
    To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5)).
mt: Awtorizza:
    
    - is-servizzi kollha kontrollati minn tcp_wrappers (ara l-paġna man hosts.deny(5)) jekk tissettja "KOLLHA",
    
    - dawk lokali biss jekk tissettja "LOKALI"
    
    - ebda konnessjoni jekk tissettja "EBDA".
    
    Biex tissettja s-servizzi li trid, uża /etc/hosts.allow (ara hosts.allow(5)).

en: If SERVER_LEVEL (or SECURE_LEVEL if absent)
    is greater than 3 in /etc/security/msec/security.conf, creates the
    symlink /etc/security/msec/server to point to
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    The /etc/security/msec/server is used by chkconfig --add to decide to
    add a service if it is present in the file during the installation of
    packages.
mt: Jekk SERVER_LEVEL (jew SECURE_LEVEL jekk assenti)
    huwa iżjed minn 3 f' /etc/security/msec/security.conf, joħloq
    il-link simboliku /etc/security/msec/server biex jipponta lejn
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    /etc/security/msec/server jintuża minn chkconfig --add biex 
    jiddeċiedi iżidx servizz jekk huwa preżenti fil-fajl waqt
    l-installazzjoni tal-pakketti.

en: Enable/Disable crontab and at for users.
    
    Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)
    and crontab(1)).
mt: Ixgħel/itfi crontab u at għal utenti.
    
    Poġġi utenti permessi f' /etc/cron.allow u /etc/at.allow (ara man ta'
    at(1) u crontab(1)).

en: Enable/Disable syslog reports to console 12
mt: Igħel/itfi rapporti syslog fuq konsol 12

en: Enable/Disable name resolution spoofing protection.  If
    "%s" is true, also reports to syslog.
mt: Ixgħel/itfi protezzjoni kontra "spoofing" tar-reżoluzzjoni ta' ismijiet. Jekk "%s" huwa veru, jirrapporta fuq syslog.

en: Security Alerts:
mt: Allerti ta' sigurtà:

en: Enable/Disable IP spoofing protection.
mt: Igħel/itfi protezzjoni kontra IP spoofing.

en: Enable/Disable libsafe if libsafe is found on the system.
mt: Ixgħel/ifti libsafe jekk dan jinstab fuq is-sistema.

en: Enable/Disable the logging of IPv4 strange packets.
mt: Ixgħel/itfi l-illoggjar tal-pakketti strambi IPv4.

en: Enable/Disable msec hourly security check.
mt: Ixgħel/itfi l-kontroll ta' sigurtà msec ta' kull siegħa

en:  Enabling su only from members of the wheel group or allow su from any user.
mt: Ippermetti su biss mill-membri tal-grupp "wheel" jew ippermetti su mill-utenti kollha.

en: Use password to authenticate users.
mt: Uża passwords biex tawtentika utenti.

en: Activate/Disable ethernet cards promiscuity check.
mt: Ixgħel/itfi l-iċċekkjar għall-promiskwità tal-kards ethernet.

en:  Activate/Disable daily security check.
mt: Ixgħel/itfi ċċekkjar tas-sigurtà ta' kuljum.

en:  Enable/Disable sulogin(8) in single user level.
mt: Ixgħel/itfi sulogin(8) fil-livell ta' utent wieħed.

en: Add the name as an exception to the handling of password aging by msec.
mt: Żid l-isem bħala eċċezzjoni għall-iċċekkjar tal-iskadenza tal-passwords minn msec.

en: Set password aging to "max" days and delay to change to "inactive".
mt: Issettja l-iskadenza tal-passwords għal "max" ġranet u ippermetti dewmien biex jaqleb inattiv.

en: Set the password history length to prevent password reuse.
mt: Issettja t-tul tal-kronoloġija tal-passwords u tippermettix li jerġa' jintuża password.

en: Set the password minimum length and minimum number of digit and minimum number of capitalized letters.
mt: Issettja t-tul minimu ta' password u numru minimu ta' numri u ittri kbar.

en: Set the root umask.
mt: Issettja umask ta' root.

en: if set to yes, check open ports.
mt: Jekk mixgħul, jiċċekkja ports miftuħa

en: if set to yes, check for:
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
mt: Jekk mixgħul, jiċċekkja :
    
    - passwords vojta,
    
    - ebda password f' /etc/shadow
    
    - għal users b'id 0 apparti root.

en: if set to yes, check permissions of files in the users' home.
mt: Jekk mixgħul, jiċċekkja l-permessi tal-fajls fid-direttorju personali tal-utenti.

en: if set to yes, check if the network devices are in promiscuous mode.
mt: Jekk mixgħul, jiċċekkja jekk it-tagħmir tan-network hux f'modalità promiskwa.

en: if set to yes, run the daily security checks.
mt: jekk mixgħul, iħaddem it-testijiet tas-sigurtà ta' kuljum.

en: if set to yes, check additions/removals of sgid files.
mt: Jekk mixgħul, jiċċekkja żieda jew tneħħija ta' fajls sgid.

en: if set to yes, check empty password in /etc/shadow.
mt: Jekk mixgħul, jiċċekkja għal passwords vojta f' /etc/shadow.

en: if set to yes, verify checksum of the suid/sgid files.
mt: jekk mixgħul, jivverifika l-integrità ta' fajls suid/sgid.

en: if set to yes, check additions/removals of suid root files.
mt: jekk mixgħul, jiċċekkja ż-żieda jew tneħħija ta' fajls suid root.

en: if set to yes, report unowned files.
mt: Jekk mixgħul, jiċċekkja fajls li m'huma ta' ħadd.

en: if set to yes, check files/directories writable by everybody.
mt: Jekk mixgħul, jiċċekkja fajls li jistgħu jinkitbu minn kulħadd.

en: if set to yes, run chkrootkit checks.
mt: Jekk mixgħul, jiċċekkja għall-eżistenza ta' rootkits

en: if set, send the mail report to this email address else send it to root.
mt: jekk mixgħul, ibgħat rapport bl-imejl f'dan l-indirizz, inkella root.

en: if set to yes, report check result by mail.
mt: jekk mixgħul, jibgħad ir-rapport tar-riżultat bl-imejl.

en: Do not send mails if there's nothing to warn about
mt: Tibgħatx imejl jekk m'hemm xejn fuq xiex twissi

en: if set to yes, run some checks against the rpm database.
mt: Jekk mixgħul, jiċċekkja xi affarijiet dwar id-databażi rpm.

en: if set to yes, report check result to syslog.
mt: jekk mixgħul, ibgħat riżultati fuq syslog.

en: if set to yes, reports check result to tty.
mt: jekk mixgħul, rapporti jintbagħatu fuq tty

en: Set shell commands history size. A value of -1 means unlimited.
mt: Issettja d-daqs tal-kronoloġija tax-shell. Valur ta' -1 ifisser bla limitu.

en: Set the shell timeout. A value of zero means no timeout.
mt: Issettja "timeout" għax-shell. Valur ta' żero jfisser is-sessjoni ma tiskadix.

en: Timeout unit is second
mt: Timeout huwa f'sekondi

en: Set the user umask.
mt: Issettja umask ta' l-utenti

en: Accept bogus IPv4 error messages
mt: Aċċetta messaġġi fittizji ta' problemi IPv4

en: Accept broadcasted icmp echo
mt: Aċċetta icmp echo imxandrin

en: Accept icmp echo
mt: Aċċetta icmp echo

en: /etc/issue* exist
mt: /etc/issue* jeżisti

en: Reboot by the console user
mt: Irributjar mill-utent fuq il-konsol

en: Allow remote root login
mt: Ippermetti login ta' root remot

en: Direct root login
mt: Login root dirett

en: List users on display managers (kdm and gdm)
mt: Elenka l-utenti fuq display managers (kdm u gdm)

en: Export display when passing from root to the other users
mt: Esporta display meta tgħaddi minn root għal utenti oħrajn

en: Allow X Window connections
mt: Ippermetti konnessjoni X Window

en: Authorize TCP connections to X Window
mt: Awtorizza konnessjonijiet TCP għal XWindows

en: Authorize all services controlled by tcp_wrappers
mt: Awtoriżża s-servizzi kollha kontrollati minn tcp_wrappers

en: Chkconfig obey msec rules
mt: Chkconfig jobdi regoli ta' msec

en: Enable "crontab" and "at" for users
mt: Ixgħel "crontab" u "at" għal utenti

en: Syslog reports to console 12
mt: Syslog jirrapporta fuq konsol 12

en: Name resolution spoofing protection
mt: Protezzjoni kontra "spoofing" tar-reżoluzzjoni ta' ismijiet

en: Enable IP spoofing protection
mt: Protezzjoni kontra spoofing IP

en: Enable libsafe if libsafe is found on the system
mt: Uża libsafe jekk jinstab fuq is-sistema

en: Enable the logging of IPv4 strange packets
mt: Illoggja pakketti strambi IPv4

en: Enable msec hourly security check
mt: Ixgħel test tas-sigurtà kull siegħa msec

en: Enable su only from the wheel group members or for any user
mt: Ippermetti su biss minn membri tal-grupp "wheel", jew utenti kollha

en: Use password to authenticate users
mt: Uża password biex tawtentika users

en: Ethernet cards promiscuity check
mt: Iċċekkja promiskwità ta' kards ethernet

en: Daily security check
mt: Iċċekkjar ta' sigurtà kuljum

en: Sulogin(8) in single user level
mt: Sulogin(8) f'livell single user

en: No password aging for
mt: Ebda skadenza tal-password għal

en: Set password expiration and account inactivation delays
mt: Issettja l-iskandeza tal-password u dewmien fl-inattivazzjoni ta' kont

en: Password history length
mt: Tul ta' kronoloġija ta' passwords

en: Password minimum length and number of digits and upcase letters
mt: Tul minimu tal-passwords, u numru ta' figuri u ittri kbar

en: Root umask
mt: umask ta' root

en: Shell history size
mt: Daqs tal-kronoloġija tax-shell

en: Shell timeout
mt: Skadenza tal-ħin tax-shell

en: User umask
mt: umask tal-utenti

en: Check open ports
mt: Iċċekjka ports miftuħa

en: Check for unsecured accounts
mt: Iċċekkja kontijiet mhux sikuri

en: Check permissions of files in the users' home
mt: Iċċekkja permessi tal-fajls fid-direttorji personali ta' l-utenti

en: Check if the network devices are in promiscuous mode
mt: Iċċekkja jekk hemmx tagħmir tan-network b'modalità promiskwa

en: Run the daily security checks
mt: Ħaddem it-testijiet ta' sigurtà ta' kuljum

en: Check additions/removals of sgid files
mt: Iċċekkja żieda/tneħħija ta' fajls sgid

en: Check empty password in /etc/shadow
mt: Iċċekkja passwords vojta f' /etc/shadow

en: Verify checksum of the suid/sgid files
mt: Ivverifika checksum ta' fajls suid/sgid

en: Check additions/removals of suid root files
mt: Iċċekkja ż-żieda/tneħħija ta' fajls suid root

en: Report unowned files
mt: Irrapporta fajls bla sid

en: Check files/directories writable by everybody
mt: Iċċekkja fajls u direttorji jinkitbu minn kulħadd

en: Run chkrootkit checks
mt: Ħaddem testijiet chkrootkit

en: Do not send mails when unneeded
mt: Tibgħatx imejls meta mhux meħtieġ

en: If set, send the mail report to this email address else send it to root
mt: Jekk mixgħul, ir-rapport jintbagħat lil dan l-indirizz, inkella lil root

en: Report check result by mail
mt: Irrapporta r-riżultat tal-iċċekkjar bl-imejl

en: Run some checks against the rpm database
mt: Ħaddem xi testijiet fuq id-databażi rpm

en: Report check result to syslog
mt: Irrapporta r-riżultat lis-syslog

en: Reports check result to tty
mt: Irrapporta r-riżultati fuq terminal

en: Welcome To Crackers
mt: Bieb miftuħ beraħ!

en: Poor
mt: Ftit li xejn

en: High
mt: Tajjeb

en: Higher
mt: Tajjeb ħafna

en: Paranoid
mt: Paranojku

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
mt: Oqgħod attent jekk tuża dan il-livell. Il-kompjuter tiegħek jista' ikun iżjed faċli tużah, imma jkun vulnerabbli ħafna. Qatt m'għandu jintuża fuq kompjuter imqabbad ma' oħrajn permezz ta' network jew ma' l-internet. Ma hemm ebda password.

en: Passwords are now enabled, but use as a networked computer is still not recommended.
mt: Il-passwords issa huma mixgħula, imma l-użu fuq l-internet jew network xorta m'hux rakkomandat.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
mt: Dan huwa s-seting rakkomandat jekk se tuża dan il-kompjuter fuq l-internet bħala klijent.

en: There are already some restrictions, and more automatic checks are run every night.
mt: Diġà hemm xi restrizzjonijiet, u iżjed testijiet awtomatiċi jitħaddmu kuljum bil-lejl.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
mt: B'dan il-livell ta' sigurtà jsir possibbli li tuża dan il-kompjuter bħala server.
    Is-sigurtà hija għolja biżżejjed biex jintuża bħala server li jaċċetta konnessjonijiet
    minn ħafna kompjuters oħra. Jekk int se tuża l-kompjuter bħala klijent biss, jew biex taċċessa l-internet, jaqbillek livell iżjed baxx.

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
mt: Ibbażat fuq il-livell ta' qabel, imma issa s-sistema hija magħluqa għal kollox.
    Is-setings tas-sigurtà qegħdin fil-massimu.

en: DrakSec Basic Options
mt: Għażliet bażiċi DrakSec

en: Please choose the desired security level
mt: Agħżel livell ta' sigurtà mixtieq

en: Security level
mt: Livell ta' sigurtà

en: Use libsafe for servers
mt: Uża libsafe għas-servers

en: A library which defends against buffer overflow and format string attacks.
mt: Din hija librerija li tipproteġi kontra attakki "buffer overflow" u "format string".

en: Security Administrator (login or email)
mt: Amministratur tas-sigurtà (login jew imejl)

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
mt: Ħaddem is-sistema tal-awdjo ALSA (Advanced Linux Sound Architecture)

en: Anacron is a periodic command scheduler.
mt: Anacron iħaddem kmandijiet perjodikament.

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
mt: apmd jintuża biex tiċċekkja l-istatus tal-batterija ta' laptop u żżomm
    rikordju fis-syslog. Jista' jintuża wkoll biex jintefa' awtomatikament
    beta l-batterija titbaxxa wisq.

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
mt: Iħaddem kmandijiet li jiġu appuntati mill-kmand "at" fil-ħin speċifikat
    meta tħaddem "at", u jħaddem programmi meta t-tagħbija tas-sistema tkun
    baxxa biżżejjed.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
mt: cron huwa programm standard tal-UNIX li jħaddem programmi speċifikati 
    mill-user f'ħinijiet speċifiċi. Vixie cron iżid numru ta' fattizzi lill-
    cron bażiku tal-UNIX, inkluż sigurtà aħjar u konfigurazzjoni iżjed b'saħħitha.

en: FAM is a file monitoring daemon. It is used to get reports when files change.
    It is used by GNOME and KDE
mt: FAM huwa proċess li jimmonitorja l-fajls. Huwa jintuża biex jiġi rappurtat meta xi fajls jinbidlu.
    Huwa jintuża minn GNOME u KDE

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
mt: GPM jippermetti l-użu tal-maws fi programmi non-grafiċi bħall-Midnight
    Commander. Jippermetti wkoll ikkopjar ta' test u menus popup fil-konsol.

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
mt: HardDrake iħaddem inkjesta tal-ħardwer, u jista' jsib u 
    jikkonfigura apparat ġdid li twaħħal.

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
mt: Apache huwa server tal-web. Huwa jista' joffri fajls HTML u CGI.

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
mt: Id-daemon tal-internet "superserver" (magħruf bħala inetd) itella'
    varjetà ta' servizzi oħra tal-internet skond il-ħtieġa. Huwa responsabbli
    li jtella' diversi servizzi, inkluż telnet, ftp, rsh u rlogin. Jekk tneħħi
    lill-inetd tkun neħħejt is-servizzi kollha tiegħu.

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
mt: Ħaddem filtrar ta' pakketti għall-kernel verżjoni 2.2 tal-Linux,
    biex tissettja firewall biex tipproteġi l-kompjuter minn attakki 
    min-network

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
mt: Dan il-pakkett itella' t-tqassim tat-tastiera kif konfigurat f'
    /etc/sysconfig/keyboard.  Dan jista' jiġi ssettjat bil-programm kbdconfig.
    Dan għandu jibqa' ssettjat għal ħafna magni.

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
mt: Riġenerazzjoni awtomatika tal-headers tal-kernel ġewwa
    /boot għal /usr/include/linux/{autoconf,version}.h

en: Automatic detection and configuration of hardware at boot.
mt: Għarfien u konfigurazzjoni ta' apparat ġdid meta tixgħel.

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
mt: Il-programm Linuxconf ġieli jagħmel diversi xogħlijiet waqt li qed
    jitla' l-kompjuter biex imantni l-konfigurazzjoni.

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
mt: lpd huwa daemon tal-ipprintjar li huwa meħtieġ biex jaħdem sew l-lpr.
    Huwa bażikament server li jqassam xogħol ta' pprintjar lill-printer/s.

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
mt: Linux Virtual Server, li jintuża biex tibni servers kbar u 
    effiċjenti ħafna.

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
mt: named (BIND) huwa "Domain Name Server" (DNS) li jirrisolvi l-indirizz IP minn isem ta' kompjuter.

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
mt: Jimmonta u jiżmonta l-filesystems kollha NFS (Unix/Linux), 
    SMB (LANmanager/Windows) jew NCP (NetWare).

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
mt: Itella' jew iwaqqaf l-interfaċċji kollha tan-network li qegħdin 
    konfigurati biex jitilgħu meta tixgħel.

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
mt: NFS huwa protokoll popolari għal qsim ta' fajls fuq networks TCP/IP. 
    Dan is-servizz jipprovdi funzjonalità ta' server NFS, li jiġi konfigurat 
    mill-fajl /etc/exports.

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
mt: NFS huwa protokoll popolari għal qsim ta' fajls fuq networks 
    TCP/IP. Dan il-modulu jipprovdi faċilità li ssakkar fajls bl-NFS.

en: Automatically switch on numlock key locker under console
    and Xorg at boot.
mt: Awtomatikament ixgħel in-"numlock" taħt il-konsol u Xorg 
    meta tixgħel

en: Support the OKI 4w and compatible winprinters.
mt: Jippermetti l-użu tal-Oki4w "win-printer" jew kompatibbli

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It will not get started unless configured so it is safe to have
    it installed on machines that do not need it.
mt: Il-PCMCIA normalment jintuża għal kards tan-network jew modems fuq 
    kompjuters laptop. Dan ma jittellax jekk ma jkunx konfigurat għalhekk 
    m'hux problema jekk tħallih fuq kompjuters li m'għandhomx bżonnu.

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
mt: Il-portmapper jimmaniġġja konnessjonijiet RPC, li jintużaw minn 
    protokolli bħal NFS u NIS. Is-server portmap irid ikun qed jaħdem fuq
    kompjuters li jaġixxu bħala servers għal protokolli li jużaw il-
    mekkaniżmu RPC.

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
mt: Postfix huwa aġent tat-trasport tal-imejl, ċioè programm li jgħaddi imejls minn kompjuter għall-ieħor.

en: Saves and restores system entropy pool for higher quality random
    number generation.
mt: Jikteb u jirrestawra blokka ta' entropija għall-ġenerazzjoni ta' 
    numri bil-polza iżjed randomi.

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle or DVD players
mt: Jassenja apparat "raw" lill apparat "block" (bħal partizzjoni tal-ħard disk), għall-użu ta' programmi bħal Oracle jew werrejja ta' DVDs

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
mt: Id-daemon routed jippermetti lit-tabella tar-"routing" li tiġi
    aġġornata awtomatikament bil-protokoll RIP. Filwaqt li l-protokoll RIP
    huwa komuni fuq networks żgħar, huma meħtieġa protokolli ta' routing
    iżjed sofistikati fuq networks komplikati.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
mt: Il-protokoll rstat jippermetti users fuq network li jiksbu
    informazzjoni dwar l-effiċjenza ta' kull magna fuq dan in-network.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
mt: Il-protokoll rusers jippermetti lill users fuq network li jidentifikaw
    min qiegħed illoggjat fuq magni oħra.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similar to finger).
mt: Il-protokoll rwho jippermetti lill user remot li jikseb lista 
    tal-users kollha li qegħdin konnessi mal-kompjuter (simili għal finger)

en: Launch the sound system on your machine
mt: Ħaddem is-sistema awdjo fuq il-kompjuter

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
mt: Syslog huwa faċilità li permezz tagħha d-daemons jistgħu iżommu
    log ta' messaġġi. Dejjem huwa rakkomandat li tħaddem 'is-syslog.

en: Load the drivers for your usb devices.
mt: Tella' d-drajvers għall-apparat usb

en: Starts the X Font Server (this is mandatory for Xorg to run).
mt: Itella' l-"X Font Server" (dan huwa meħtieġ biex jaħdem l-Xorg).

en: Choose which services should be automatically started at boot time
mt: Agħżel liema servizzi għandhom jittellgħu awtomatikament meta tixgħel

en: Printing
mt: Printjar

en: File sharing
mt: Qsim ta' fajls

en: Remote Administration
mt: Amministrazzjoni remota

en: Database Server
mt: Server Database

en: running
mt: imtella'

en: stopped
mt: imwaqqaf

en: Services and daemons
mt: Servizzi u daemons

en: No additional information
    about this service, sorry.
mt: M'hemmx iżjed informazzjoni
    dwar dan l-apparat, jiddispjaċini.

en: Start when requested
mt: Tella' meta meħtieġ

en: On boot
mt: Malli tixgħel

en: Start
mt: Ibda

en: Stop
mt: Ieqaf

en: <b>What is Mandrakelinux?</b>
mt: <b>X'inhu Mandrakelinux?</b>

en: Welcome to <b>Mandrakelinux</b>!
mt: Merħba għal <b>Mandrakelinux</b>!

en: Mandrakelinux is a <b>Linux distribution</b> that comprises the core of the system, called the <b>operating system</b> (based on the Linux kernel) together with <b>a lot of applications</b> meeting every need you could even think of.
mt: Mandrakelinux hija <b>distribuzzjoni tal-Linux</b> li jinkludi l-qalba tas-sistema, magħrufa bħala s-<b>sistema operattiva</b> (ibbażata fuq il-kernel Linux) flimkien ma' <b>ħafna programmi</b> li għandhom jaqdu kull ħtieġa li qatt jista' jkollok.

en: Mandrakelinux is the most <b>user-friendly</b> Linux distribution today. It is also one of the <b>most widely used</b> Linux distributions worldwide!
mt: Mandrakelinux hija l-iżjed distribuzzjoni ta' Linux <b>faċli tużaha</b> illum Hija wkoll waħda mill-iżjed distribuzzjonijiet ta' Linux tintuża madwar id-dinja!

en: <b>Open Source</b>
mt: <b>Sors Miftuħ</b>

en: Welcome to the <b>world of open source</b>!
mt: Merħba għad-<b>dinja ta' Sors Miftuħ</b>!

en: Mandrakelinux is committed to the open source model. This means that this new release is the result of <b>collaboration</b> between <b>Mandrakesoft's team of developers</b> and the <b>worldwide community</b> of Mandrakelinux contributors.
mt: Mandrakelinux hija kommessa għall-mudell ta' sors miftuħ. Dan ifisser li din l-edizzjoni ġdida hija riżultat ta' <b>kollaborazzjoni</b> bejn <b>it-tim ta' żviluppaturi ta' Mandrakesoft</b> u l-<b>komunità dinjija</b> ta' kontributuri ta' Mandrakelinux.

en: We would like to <b>thank</b> everyone who participated in the development of this latest release.
mt: Nixtiequ <b>nirringrazzjaw</b> lill kull min ipparteċipa fl-iżvilupp ta' din l-iżjed ħarġa riċenti.

en: <b>The GPL</b>
mt: <b>Il-GPL</b>

en: Most of the software included in the distribution and all of the Mandrakelinux tools are licensed under the <b>General Public License</b>.
mt: Ħafna mis-softwer inkluż mad-distribuzzjoni u l-għodda kollha Mandrakelinux huma liċenzjati taħt il-<b>Liċenzja Ġenerali Pubblika (GPL)</b>

en: The GPL is at the heart of the open source model; it grants everyone the <b>freedom</b> to use, study, distribute and improve the software any way they want, provided they make the results available.
mt: Il-GPL hija fil-qalba tal-mudell ta' sors miftuġ; hija tagħti lil kulħadd il-<b>libertà</b> li tuża, tistudja, tqassam u ttejjeb is-softwer b'liema mod iridu, basta jippubblikaw ir-riżultat.

en: The main benefit of this is that the number of developers is virtually <b>unlimited</b>, resulting in <b>very high quality</b> software.
mt: Il-benefiċċju ewlieni ta' dan huwa li n-numru ta' nies jiżviluppaw huwa prattikament bla limitu, u jirriżulta f'softwer ta' kwalità għolja ħafna.

en: <b>Join the Community</b>
mt: <b>Issieħeb mal-Komunità</b>

en: Mandrakelinux has one of the <b>biggest communities</b> of users and developers. The role of such a community is very wide, ranging from bug reporting to the development of new applications. The community plays a <b>key role</b> in the Mandrakelinux world.
mt: Mandrakelinux għandha waħda mill-<b>ikbar komunitajiet</b> ta' utenti u żviluppaturi. Ir-rwol ta' din il-komunità huwa wiesa', u jinkludi mir-rappurtar ta' "bugs" sa l-iżvilupp ta' programmi ġodda. Il-komunità għandha <b>rwol kruċjali</b> fid-dinja ta' Mandrakelinux.

en: To <b>learn more</b> about our dynamic community, please visit <b>www.mandrakelinux.com</b> or directly <b>www.mandrakelinux.com/en/cookerdevel.php3</b> if you would like to get <b>involved</b> in the development.
mt: Biex <b>issir taf iżjed</b> dwar il-komunità dinamika tagħna, jekk jogħġbok żur <b>www.mandrakelinux.com</b> jew mur direttament fuq <b>www.mandrakelinux.com/en/cookerdevel.php3</b> jekk trid tkun involut fl-iżviluppar.

en: <b>Download Version</b>
mt: <b>Verżjoni download</b>

en: You are now installing <b>Mandrakelinux Download</b>. This is the free version that Mandrakesoft wants to keep <b>available to everyone</b>.
mt: Int qed tinstalla <b>Mandrakelinux Download</b>. Din hija verżjoni b'xejn li Mandrakesoft jixtiequ jibqgħu <b>jipprovdu lil kulħadd</b>

en: The Download version <b>cannot include</b> all the software that is not open source. Therefore, you will not find in the Download version:
mt: Il-verżjoni download <b>ma tistax tinkludi</b> s-softwer kollu li mhux sors miftuħ. Għalhekk, ma ssibux fuq il-verżjoni download:

en: 	* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.).
mt: 	* <b>Drajvers propjetarji</b> (bħad-drajvers għal NVIDIA®, ATI™, eċċ).

en: 	* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, Flash™, etc.).
mt: 	* <b>Softwer propjetarju</b> (bħal Acrobat® Reader®, RealPlayer®, Flash™, eċċ).

en: You will not have access to the <b>services included</b> in the other Mandrakesoft products either.
mt: Anqas m'għandek aċċess għas-<b>servizzi inklużi</b> fi prodotti oħra ta' Mandrakesoft.

en: <b>Discovery, Your First Linux Desktop</b>
mt: <b>Discovery, l-ewwel desktop tal-Linux tiegħek</b>

en: You are now installing <b>Mandrakelinux Discovery</b>.
mt: Int qed tinstalla <b>Mandrakelinux Discovery</b>.

en: Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux distribution. It includes a hand-picked selection of <b>premium software</b> for office, multimedia and Internet activities. Its menu is task-oriented, with a single application per task.
mt: Discovery huwa l-iżjed distribuzzjoni ta' Linux <b>faċli</b> u <b>"user-friendly"</b>. Jinkludi seleżżjoni ta' <b>softwer ta' kwalità</b> magħżula individwalment għall-attivitajiet ta' l-uffiċċju, multimedia u internet. Il-menu huwa mqassam skond it-tip ta' xogħol, bi programm wieħed għal kull xogħol.

en: <b>PowerPack, The Ultimate Linux Desktop</b>
mt: <b>PowerPack, L-Aqwa Desktop tal-Linux</b>

en: You are now installing <b>Mandrakelinux PowerPack</b>.
mt: Int qed tinstalla <b>Mandrakelinux PowerPack</b>.

en: PowerPack is Mandrakesoft's <b>premier Linux desktop</b> product. PowerPack includes <b>thousands of applications</b> - everything from the most popular to the most advanced.
mt: PowerPack huwa <b>l-aħjar desktop tal-Linux</b> ta' Mandrakesoft. PowerPack jinkludi <b>eluf ta' programmi</b> - mill-iżjed popolari sa l-iżjed avvanzati.

en: <b>PowerPack+, The Linux Solution for Desktops and Servers</b>
mt: <b>PowerPack+, Is-Soluzzjoni tal-Linux għal Desktops u Servers</b>

en: You are now installing <b>Mandrakelinux PowerPack+</b>.
mt: Int qed tinstalla <b>Mandrakelinux PowerPack+</b>.

en: PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop applications</b> and a comprehensive selection of world-class <b>server applications</b>.
mt: PowerPack+ huwa <b>soluzzjoni komprenziva tal-Linux</b> għal networks żgħar u medji. PowerPack+ jinkludi eluf ta' <b>programmi tad-desktop</b> u għażla komprensiva ta' <b>programmi tas-server</b> ta' klassi dinjija.

en: <b>Mandrakesoft Products</b>
mt: <b>Prodotti Mandrakesoft</b>

en: <b>Mandrakesoft</b> has developed a wide range of <b>Mandrakelinux</b> products.
mt: <b>Mandrakesoft</b> żviluppaw għażla sħiħa ta' prodotti <b>Mandrakelinux</b>.

en: The Mandrakelinux products are:
mt: Il-prodotti Mandrakelinux huma:

en: 	* <b>Discovery</b>, Your First Linux Desktop.
mt: 	* <b>Discovery</b>, l-ewwel desktop tal-Linux tiegħek

en: 	* <b>PowerPack</b>, The Ultimate Linux Desktop.
mt: 	* <b>PowerPack</b>, L-Aqwa Desktop tal-Linux.

en: 	* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers.
mt: 	* <b>PowerPack+</b>, Is-Soluzzjoni tal-Linux għal Desktops u Servers.

en: 	* <b>Mandrakelinux for x86-64</b>, The Mandrakelinux solution for making the most of your 64-bit processor.
mt: 	* <b>Mandrakelinux għal x86-64</b>, Is-soluzzjoni Mandrakelinux biex tieħu l-massimu mill-proċessatur 64-bit tiegħek.

en: <b>Mandrakesoft Products (Nomad Products)</b>
mt: <b>Prodotti Mandrakesoft (Prodotti Nomadi)</b>

en: Mandrakesoft has developed two products that allow you to use Mandrakelinux <b>on any computer</b> and without any need to actually install it:
mt: Mandrakesoft żviluppaw żewġ prodotti li jħalluk tuża Mandrakelinux <b>fuq kwalinkwa kompjuter</b> mingħajr m'hemm bżonn tinstallah:

en: 	* <b>Move</b>, a Mandrakelinux distribution that runs entirely from a bootable CD-ROM.
mt: 	* <b>Move</b>, distribuzzjoni ta' Mandrakelinux li taħdem totalment minn fuq CDROM jibbutja.

en: 	* <b>GlobeTrotter</b>, a Mandrakelinux distribution pre-installed on the ultra-compact “LaCie Mobile Hard Drive”.
mt: 	* <b>GlobeTrotter</b>, distribuzzjoni ta' Mandrakelinux installata bil-lest fuq “LaCie Mobile Hard Drive”.

en: <b>Mandrakesoft Products (Professional Solutions)</b>
mt: <b>Prodotti Mandrakesoft (Soluzzjonijiet Professjonali)</b>

en: Below are the Mandrakesoft products designed to meet the <b>professional needs</b>:
mt: Hawn taħt issib il-prodotti Mandrakesoft intenzjonati li jaqdu <b>ħtiġijiet professjonali</b>:

en: 	* <b>Corporate Desktop</b>, The Mandrakelinux Desktop for Businesses.
mt: 	* <b>Corporate Desktop</b>, Id-desktop Mandrakelinux għan-negozju.

en: 	* <b>Corporate Server</b>, The Mandrakelinux Server Solution.
mt: 	* <b>Corporate Server</b>, Is-soluzzjoni server ta' Mandrakelinux

en: 	* <b>Multi-Network Firewall</b>, The Mandrakelinux Security Solution.
mt: 	* <b>Multi-Network Firewall</b>, Is-soluzzjoni at' sigurtà ta' Mandrakelinux

en: <b>The KDE Choice</b>
mt: <b>L-Għażla KDE</b>

en: With your Discovery, you will be introduced to <b>KDE</b>, the most advanced and user-friendly <b>graphical desktop environment</b> available.
mt: B' Discovery, int tiġi ntrodott għal <b>KDE</b>, l-iżjed ambjent grafiku avvanzat u faċli tużah disponibbli.

en: KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you will not ever think of running another operating system!
mt: KDE jagħmillek l-<b>ewwel passi</b> fil-Linux tant faċli li anqas ikollok aptit terġa' tħaddem sistema operattiva oħra!

en: KDE also includes a lot of <b>well integrated applications</b> such as Konqueror, the web browser and Kontact, the personal information manager.
mt: KDE jinkludi wkoll diversi <b>programmi integrati sew</b>, bħal Konqueror, il-browser tal-web, u Kontact, għall-informazzjoni personali u imejl.

en: <b>Choose your Favorite Desktop Environment</b>
mt: <b>Agħżel l-Ambjent tad-Desktop Favorit</b>

en: With PowerPack, you will have the choice of the <b>graphical desktop environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one.
mt: Bil-PowerPack, int ikollok għażla ta' <b>ambjent grafiku tad-desktop</b>. Mandrakesoft għażlu <b>KDE</b> bħala dak impliċitu.

en: KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical desktop environment available. It includes a lot of integrated applications.
mt: <b>KDE</b> huwa l-iżjed ambjent grafiku avvanzat u faċli tużah disponibbli. Huwa jinkludi diversi programmi integrati.

en: But we advise you to try all available ones (including <b>GNOME</b>, <b>IceWM</b>, etc.) and pick your favorite.
mt: Però aħna nissuġġerixxu li tipprova dawk kollha disponibbli (inkluż <b>GNOME</b>, <b>IceWM</b>, eċċ) u tagħżel il-favorit tiegħek.

en: With PowerPack+, you will have the choice of the <b>graphical desktop environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one.
mt: Bil-PowerPack+, int ikollok għażla ta' <b>ambjent grafiku tad-desktop</b>. Mandrakesoft għażlu <b>KDE</b> bħala dak impliċitu.

en: With Discovery, you will discover <b>OpenOffice.org</b>.
mt: B' Discovery, int tiskopri <b>OpenOffice.org</b>.

en: It is a <b>full-featured office suite</b> that includes word processor, spreadsheet, presentation and drawing applications.
mt: Huwa sett ta' <b>programmi ta' l-uffiċċju</b> li jinkludu <i>word processor</i>, <i>spreadsheet</i> u programmi ta' preżentazzjoni u tpinġija.

en: OpenOffice.org can read and write most types of <b>Microsoft® Office</b> documents such as Word, Excel and PowerPoint® files.
mt: OpenOffice.org jista' jaqra u jikteb il-biċċa l-kbira ta' dokumenti ta' <b>Microsoft® Office</b> bħal fajls tal-Word, Excel u PowerPoint® files.

en: Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>.
mt: Discovery jinkludi <b>Kontact</b>, is-<b>soluzzjoni groupware</b> ġdida ta' KDE.

en: More than just a full-featured <b>e-mail client</b>, Kontact also includes an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</b>!
mt: Fih ħafna iżjed milli sempliċi programm tal-imejl. Kontact jinkludi wkoll <b>ktieb tal-indirizzi</b>, <b>kalendarju</b> u għodda biex iżżomm <b>noti</b>!

en: It is the easiest way to communicate with your contacts and to organize your time.
mt: Huwa l-eħfef mod biex tikkomunika bil-kuntatti u biex torganizza l-ħin tiegħek.

en: <b>Surf the Internet</b>
mt: <b>Esplora l-Internet</b>

en: Discovery will give you access to <b>every Internet resource</b>:
mt: Discovery jagħtik aċċess għar-<b>riżorsi kollha tal-Internet</b>

en: 	* Browse the <b>Web</b> with Konqueror.
mt: 	* Ibbrawżja l-<b>Web</b> b' Konqueror.

en: 	* <b>Chat</b> online with your friends using Kopete.
mt: 	* <b>Tħaddet</b> online ma' sħabek b' Kopete.

en: 	* <b>Transfer</b> files with KBear.
mt: 	* <b>Ittrasferixxi</b> fajls b' KBear.

en: <b>Enjoy our Multimedia Features</b>
mt: <b>Esplora l-Programmi ta' Multimedia Tagħna</b>

en: Discovery will also make <b>multimedia</b> very easy for you:
mt: Discovery jagħmel il-<b>multimedia</b> faċli ħafna għalik:

en: 	* Watch your favorite <b>videos</b> with Kaffeine.
mt: 	* Ara l-<b>videos</b> favoriti tiegħek b' Kaffeine.

en: 	* Listen to your <b>music files</b> with amaroK.
mt: 	* Isma' l- <b>fajls ta' mużika</b> b' amaroK.

en: 	* Edit and create <b>images</b> with the GIMP.
mt: 	* Editja u oħloq <b>stampi</b> bil-GIMP.

en: <b>Enjoy the Wide Range of Applications</b>
mt: <b>Ħu Gost bil-Varjetà Kbira ta' Programmi</b>

en: In the Mandrakelinux menu you will find <b>easy-to-use</b> applications for <b>all of your tasks</b>:
mt: Fil-menu Mandrakelinux issib programmi <b>faċli tużahom</b> għax-<b>xogħol kollu</b> li trid:

en: 	* Create, edit and share office documents with <b>OpenOffice.org</b>.
mt: 	* Oħloq, ibdel u aqsam dokumenti b' <b>OpenOffice.org</b>.

en: 	* Manage your personal data with the integrated personal information suites <b>Kontact</b> and <b>Evolution</b>.
mt: 	* Immaniġġja l-informazzjoni personali bManage your personal data with the integrated personal information suites <b>Kontact</b> and <b>Evolution</b>.

en: 	* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>.
mt: 	* Ibbrawżja l-web b' <b>Mozilla</b> u <b>Konqueror</b>.

en: 	* Participate in online chat with <b>Kopete</b>.
mt: 	* Ipparteċipa f'taħdit online b' <b>Kopete</b>.

en: 	* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your <b>videos</b>.
mt: 	* Isma' s-<b>CDs tal-mużika</b>, <b>fajls tal-mużika</b> u ara <b>videos</b>.

en: 	* Edit and create images with the <b>GIMP</b>.
mt: 	* Editja u oħloq stampi bil-<b>GIMP</b>.

en: <b>Development Environments</b>
mt: <b>Ambjenti ta' żviluppar</b>

en: PowerPack gives you the best tools to <b>develop</b> your own applications.
mt: PowerPack jagħtik l-aħjar għodda biex <b>tiżviluppa</b> programmi tiegħek.

en: You will enjoy the powerful, integrated development environment from KDE, <b>KDevelop</b>, which will let you program in a lot of languages.
mt: Int issib l-ambjent integrat ta' l-iżviluppar avvanzat u b'saħħtu mill-KDE, <b>KDevelop</b>, li jħallik tipprogramma b'diversi lingwi.

en: PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</b>, the associated debugger.
mt: PowerPack jinkludi wkoll <b>GCC</b>, il-kompilatur ewlieni tal-Linux, u <b>GDB</b>, id-debugger assoċjat.

en: <b>Development Editors</b>
mt: <b>Edituri ta' l-iżviluppar</b>

en: PowerPack will let you choose between those <b>popular editors</b>:
mt: PowerPack iħallik tagħżel bejn dawn l-<b>edituri popolari</b>:

en: 	* <b>Emacs</b>: a customizable and real time display editor.
mt: 	* <b>Emacs</b>: editur viżwali li tista' tippersonalizzah.

en: 	* <b>XEmacs</b>: another open source text editor and application development system.
mt: 	* <b>XEmacs</b>: editur ieħor sors miftuħ u sistema ta' żviluppar ta' programmi

en: 	* <b>Vim</b>: an advanced text editor with more features than standard Vi.
mt: 	* <b>Vim</b>: editur ta' test avvanzat b'iżjed kapaċitajiet minn Vi standard.

en: <b>Development Languages</b>
mt: <b>Lingwi ta' Żviluppar</b>

en: With all these <b>powerful tools</b>, you will be able to write applications in <b>dozens of programming languages</b>:
mt: B'dawn l-<b>għodda b'saħħithom</b>, tkun tista' tikteb programmi b' <b>diversi lingwi ta' żviluppar</b>:

en: 	* The famous <b>C language</b>.
mt: 	* Il-lingwa famuża <b>C</b>.

en: 	* Object oriented languages:
mt: 	* Lingwi "object oriented":

en: 	* Scripting languages:
mt: 	* lingwi ta' scripting:

en: 	* And many more.
mt: 	* U ħafna oħrajn.

en: <b>Development Tools</b>
mt: <b>Għodda ta' żviluppar</b>

en: With the powerful integrated development environment <b>KDevelop</b> and the leading Linux compiler <b>GCC</b>, you will be able to create applications in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.).
mt: Bl-ambjent b'saħħtu integrat tal-iżviluppar <b>KDevelop</b> u l-kompilatur <b>GCC</b>, int tista' toħloq programmi f'<b>ħafna lingwi differenti</b> (C, C++, Java™, Perl, Python, eċċ).

en: <b>Groupware Server</b>
mt: <b>Server tal-Groupware</b>

en: PowerPack+ will give you access to <b>Kolab</b>, a full-featured <b>groupware server</b> which will, thanks to the client <b>Kontact</b>, allow you to:
mt: PowerPack+ jagħtik aċċess għal <b>Kolab</b>, server tal-groupware f'funzjonalità sħiħa li, permezz tal-klijent <b>Kontact</b>, iħallik:

en: 	* Send and receive your <b>e-mails</b>.
mt: 	* Tibgħat u tirċievi messaġġi bl-<b>imejl</b>.

en: 	* Share your <b>agendas</b> and your <b>address books</b>.
mt: 	* Taqsam l-<b>aġenda</b> u l-<b>ktieb tal-indirizzi</b>.

en: 	* Manage your <b>memos</b> and <b>task lists</b>.
mt: 	* Immaniġġja l-<b>memos</b> u l-<b>listi ta' xogħlijiet</b>.

en: Empower your business network with <b>premier server solutions</b> including:
mt: Saħħaħ in-network tan-negozju b' <b>soluzzjonijiet tas-server</b> inkluż:

en: 	* <b>Samba</b>: File and print services for Microsoft® Windows® clients.
mt: 	* <b>Samba</b>: Servizzi ta' fajls u pprintjar għal klijenti Microsoft® Windows®.

en: 	* <b>Apache</b>: The most widely used web server.
mt: 	* <b>Apache</b>: L-iżjed web server li jintuża fid-dinja.

en: 	* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source databases.
mt: 	* <b>MySQL</b> u <b>PostgreSQL</b>: L-iżjed databażi popolari sors miftuħ.

en: 	* <b>CVS</b>: Concurrent Versions System, the dominant open source network-transparent version control system.
mt: 	* <b>CVS</b>: Concurrent Versions System, systema ta' kontroll ta' verżjonijiet dominanti għal networks.

en: 	* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software.
mt: 	* <b>ProFTPD</b>: Server tal-FTP konfigurabbli u liċenzjat bil-GPL.

en: 	* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail servers.
mt: 	* <b>Postfix</b> u <b>Sendmail</b>: Is-servers tal-imejl b'saħħithom u popolari.

en: <b>Mandrakelinux Control Center</b>
mt: <b>Ċentru tal-Kontroll Mandrakelinux</b>

en: The <b>Mandrakelinux Control Center</b> is an essential collection of Mandrakelinux-specific utilities designed to simplify the configuration of your computer.
mt: Iċ-<b>Ċentru ta' Kontroll Mandrakelinux</b> huwa kollezzjoni essenzjali ta' programmi speċifiċi ta' Mandrakelinux li jissimplifikaw il-konfigurazzjoni tal-kompjuter.

en: You will immediately appreciate this collection of <b>more than 60</b> handy utilities for <b>easily configuring your system</b>: hardware devices, mount points, network and Internet, security level of your computer, etc.
mt: Mill-ewwel tapprezza din il-kollezzjoni ta' <b>iżjed minn 60</b> għodda utli biex <b>tikkonfigura s-sistema faċilment</b>: tagħmir ta' ħardwer, punti ta' mmuntar, network u internet, livell ta' sigurtà tal-kompjuter, eċċ.

en: <b>The Open Source Model</b>
mt: <b>Il-Mudell Sors Miftuħ</b>

en: Like all computer programming, open source software <b>requires time and people</b> for development. In order to respect the open source philosophy, Mandrakesoft sells added value products and services to <b>keep improving Mandrakelinux</b>. If you want to <b>support the open source philosophy</b> and the development of Mandrakelinux, <b>please</b> consider buying one of our products or services!
mt: Bħal kull programmar tal-kompjuter, softwer sors miftuħ <b>jiħtieġ ħin u nies</b> biex jiżviluppawh. Sabiex tirrispetta l-filosofija tas-sors miftuħ, Mandrakesoft ibiegħu prodotti b'valur miżjud u servizzi biex <b>ikomplu itejbu lil Mandrakelinux</b>. Jekk tixtieq <b>tappoġġja l-filosofija ta' sors miftuħ</b> u l-iżvilupp ta' Mandrakelinux, <b>jekk jogħġbok</b> ikkunsidra li tixtri wieħed mill-prodotti jew servizzi tagħna!

en: <b>Online Store</b>
mt: <b>Ħanut Online</b>

en: To learn more about Mandrakesoft products and services, you can visit our <b>e-commerce platform</b>.
mt: Biex issir taf iżjed dwar il-prodotti u servizzi Mandrakesoft, tista' żżur il-<b>pjattaforma e-kummerċ</b> tagħna.

en: There you can find all our products, services and third-party products.
mt: Hemm tista' ssib il-prodotti u servizzi kollha tagħna u prodotti ta' terzi partijiet.

en: This platform has just been <b>redesigned</b> to improve its efficiency and usability.
mt: Din il-pjattaforma reġgħet ġiet <b>diżinjata</b> biex tkun iżjed effiċjenti u faċli tużaha.

en: Stop by today at <b>store.mandrakesoft.com</b>!
mt: Aqbeż qabża llum għand <b>store.mandrakesoft.com</b>!

en: <b>Mandrakeclub</b> is the <b>perfect companion</b> to your Mandrakelinux product..
mt: <b>Mandrakeclub</b> huwa s-<b>sieħeb idejali</b> għall-prodott Mandrakelinux tiegħek..

en: Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:
mt: Ħu vantaġġ minn <b>benefiċċji</b> billi tissieħeb ma' Mandrakeclub, fosthom:

en: 	* <b>Special discounts</b> on products and services of our online store <b>store.mandrakesoft.com</b>.
mt: 	* <b>Skontijiet speċjali</b> fuq prodotti u servizzi tal-ħanut online tagħna<b>store.mandrakesoft.com</b>.

en: 	* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ drivers).
mt: 	* Aċċess għal <b>programmi kummerċjali</b> (per eżempju drajvers NVIDIA® jew ATI™).

en: 	* Participation in Mandrakelinux <b>user forums</b>.
mt: 	* Parteċipazzjoni fil-<b>forums tal-utenti</b> Mandrakelinux.

en: 	* <b>Early and privileged access</b>, before public release, to Mandrakelinux <b>ISO images</b>.
mt: 	* <b>Aċċess kmieni u privileġġjat</b>, qabel il-ħarġa pubblika, għal <b>ISO images</b> Mandrakelinux.

en: <b>Mandrakeonline</b> is a new premium service that Mandrakesoft is proud to offer its customers!
mt: <b>Mandrakeonline</b> huwa servizz ġdid ewlieni li Mandrakesoft kburin joffru lill-klijenti!

en: Mandrakeonline provides a wide range of valuable services for <b>easily updating</b> your Mandrakelinux systems:
mt: Mandrakeonline jipprovdi firxa ta' servizzi tajbin biex <b>faċilment taġġorna</b> s-sistemi Mandrakelinux:

en: 	* <b>Perfect</b> system security (automated software updates).
mt: 	* Sigurtà tas-sistema <b>perfetta</b> (aġġornamenti ta' softwer awtomatizzat).

en: 	* <b>Notification</b> of updates (by e-mail or by an applet on the desktop).
mt: 	* <b>Notifiċi</b> dwar aġġornamenti (permezz ta' imejl jew applet fuq id-desktop).

en: 	* Flexible <b>scheduled</b> updates.
mt: 	* <b>Skedi</b> flessibbli ta' aġġornamenti.

en: 	* Management of <b>all your Mandrakelinux systems</b> with one account.
mt: 	* L-immaniġġjar tas-<b>sistemi kollha Mandrakelinux</b> minn kont wieħed.

en: Do you require <b>assistance?</b> Meet Mandrakesoft's technical experts on <b>our technical support platform</b> www.mandrakeexpert.com.
mt: Għandek bżonn l-<b>għajnuna</b>? Iltaqa' mal-esperti tekniċi ta' Mandrakesoft fuq il-<b>pjattaforma ta' għajnuna teknika</b> www.mandrakeexpert.com.

en: Thanks to the help of <b>qualified Mandrakelinux experts</b>, you will save a lot of time.
mt: Grazzi għall-għajnuna ta' <b>esperti kwalifikati ta' Mandrakelinux</b>, int tiffranka ħafna ħin.

en: For any question related to Mandrakelinux, you have the possibility to purchase support incidents at <b>store.mandrakesoft.com</b>.
mt: Għal kwalinkwa mistoqsija relatata ma' Mandrakelinux, għandek il-possibbiltà li tixtri inċidenti ta' sapport minn fuq <b>store.mandrakesoft.com</b>.

en: Office Workstation
mt: Kompjuter tal-Uffiċċju

en: Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc
mt: Programmi tal-uffiċċju: wordprocessors (OpenOffice.org Writer, Kword), spreadsheet (OpenOffice.org Calc, Kspread) eċċ

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
mt: Programmi tal-uffiċċju: wordprocessors (kword, abiword), spreadsheet (kspread, gnumeric) eċċ

en: Game station
mt: Logħob

en: Amusement programs: arcade, boards, strategy, etc
mt: Programmi ta' divertiment: logħob tal-arcaDES, karti, strateġija eċċ

en: Multimedia station
mt: Multimedja

en: Sound and video playing/editing programs
mt: Programmi għad-daqq u editjar ta' awdjo u video

en: Internet station
mt: Internet

en: Set of tools to read and send mail and news (mutt, tin..) and to browse the Web
mt: Sett għodda biex taqra u tibgħat imejl u "news", u biex tibbrawżja l-web

en: Network Computer (client)
mt: Kompjuter fuq network (klijent)

en: Clients for different protocols including ssh
mt: Klijenti għal protokolli differenti, eż. SSH

en: Configuration
mt: Konfigurazzjoni

en: Tools to ease the configuration of your computer
mt: Għodda biex tiffaċilita l-konfigurazzjoni tal-kompjuter

en: Console Tools
mt: Għodda tal-konsol

en: Editors, shells, file tools, terminals
mt: Edituri, shells, għodda tal-fajls, terminals

en: C and C++ development libraries, programs and include files
mt: Libreriji, programmi u fajls għal żviluppar C u C++

en: Documentation
mt: Dokumentazzjoni

en: Books and Howto's on Linux and Free Software
mt: Kotba u "HOWTO" dwar il-Linux u Softwer Ħieles

en: Linux Standard Base. Third party applications support
mt: Linux Standard Base. Sapport ta' programmi ta' terzi partiti

en: Kolab Server
mt: Server Kolab

en: Internet gateway
mt: Gateway tal-internet

en: FTP Server
mt: Server FTP

en: Mail
mt: Imejl

en: Postfix mail server
mt: Server tal-imejl Postfix

en: PostgreSQL or MySQL database server
mt: Server tad-database PostgreSQL jew MySQL

en: Network Computer server
mt: Kompjuter Server tan-Network

en: NFS server, SMB server, Proxy server, ssh server
mt: Servers NFS, SMB, Proxy, ssh

en: KDE Workstation
mt: Stazzjon KDE

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
mt: K Desktop Environment, l-interfaċċja grafika bażi, b'għażla ta' għodda jakkumpanjawha

en: GNOME Workstation
mt: Stazzjon GNOME

en: A graphical environment with user-friendly set of applications and desktop tools
mt: Ambjent grafiku b' għażla ta' programmi u għodda faċli

en: Other Graphical Desktops
mt: Desktops Grafiċi Oħrajn

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
mt: Icewm, Window Maker, Enlightenment, Fvwm, eċċ

en: SSH Server
mt: Server SSH

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
mt: Dan il-programm huwa softwer ħieles; tista' tiddistribwih u/jew tibdlu
    skond it-termini tal-Liċenzja Ġenerali Pubblika (GPL) GNU, kif ippubblikata
    mill-Free Software Foundation; jew verżjoni 2 tal-liċenzja, jew (skond il-
    ġudizzju tiegħek) waħda iżjed riċenti.
    
    Dan il-programm huwa distribwit bl-isperanza li jkun utli, imma
    MINNGĦAJR EBDA GARANZIJA; minngħajr saħansitra l-garanzija impliċita 
    ta' MERKANTABILITÀ jew LI HU ADEGWAT GĦAL UŻU PARTIKULARI. Ara
    l-Liċenzja Ġenerali Pubblika GNU (GNU General Public License) għal iżjed
    dettalji.
    
    Għandek tirċievi kopja tal-Liċenzja Ġenerali Pubblika GNU flimkien ma' dan
    il-programm. Jekk le, ikteb lill-Free Software Foundation, Inc., 
    59, Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: [keyboard]
mt: [tastiera]

en: Please log out and then use Ctrl-Alt-BackSpace
mt: Jekk jogħġbok oħroġ mid-desktop u agħfas Ctrl-Alt-Backspace

en: You need to log out and back in again for changes to take effect
mt: Trid tilloggja 'l barra u terġa' tidħol biex ikollhom effett il-bidliet.

en: Useless without Terminal Server
mt: Bla użu mingħajr Terminal Server

en: %s: %s requires a username...
mt: %s: %s għandu bżonn isem ta' utent...

en: %s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...
mt: %s: %s jiħtieġ isem il-kompjuter, indirizz MAC, IP, nbi-image, 0/1 għal THIN_CLIENT, 0/1 għal konfigurazzjoni lokali...

en: %s: %s requires hostname...
mt: %s: %s jiħtieġ isem il-kompjuter...

en: Terminal Server Configuration
mt: Konfigurazzjoni tat-Terminal Server

en: Enable Server
mt: Ippermetti server

en: Disable Server
mt: Diżabilita server

en: Start Server
mt: Startja server

en: Stop Server
mt: Waqqaf server

en: Etherboot Floppy/ISO
mt: Etherboot flopi/ISO

en: Add/Del Users
mt: Żid/neħħi users

en: Add/Del Clients
mt: Żid/neħħi klijenti

en: Images
mt: Stampi

en: First Time Wizard
mt: Saħħar ta' l-ewwel darba

en: %s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$
mt: %s definit bħala dm, qed jiġi miżjud utent gdm ma' to /etc/passwd$$CLIENT$$

en: 
     This wizard routine will:
     	1) Ask you to select either 'thin' or 'fat' clients.
    	2) Setup DHCP.
    	
    After doing these steps, the wizard will:
    	
        a) Make all nbis.                                                                
        b) Activate the server.                                                          
        c) Start the server.                                                     
        d) Synchronize the shadow files so that all users, including root, 
           are added to the shadow$$CLIENT$$ file.                                              
        e) Ask you to make a boot floppy.
        f) If it's thin clients, ask if you want to restart KDM.
mt: 
     Din ir-rutina tas-saħħar se:
    	1) Titolbok tagħżel klijenti "ħfief" jew "tqal".
    	2) Tissettja DHCP.
    	
    Wara dawn il-passi is-saħħar:
    	
        a) Joħloq l-NBIs kollha.
        b) Jattiva s-server.
        c) Jistartja s-server.
        d) Jissinkrontizza l-fajls shadow sabiex il-klijenti kollha, inkluż
           root, jiġu miżjuda mal-fajl shadow$$CLIENT$$.
        e) Jitolbok toħloq flopi għall-ibbutjar.
        f) Jekk il-klijenti huma ħfief, jistaqsik tridx tirristartja KDM.

en: Cancel Wizard
mt: Ikkanċella s-saħħar

en: Please save dhcpd config!
mt: Jekk jogħġbok ikteb il-konfig dhcp!

en: Use thin clients.
mt: Uża klijenti ħfief (thin clients)

en: Sync client X keyboard settings with server.
mt: Issinkronizza t-tastiera X tal-klijent mas-server.

en: Please select default client type.
        'Thin' clients run everything off the server's CPU/RAM, using the client display.
        'Fat' clients use their own CPU/RAM but the server's filesystem.
mt: Jekk jogħġbok agħżel it-tip ta' klijent.
       Klijenti "ħfief" iħaddmu kollox fuq is-CPU u RAM tas-server u jużaw l-iskrin tal-klijent.
       Klijenti "tqal" jużaw is-CPU u RAM tagħhom stess, imma s-sistema tal-fajls fuq is-server.

en: Creating net boot images for all kernels
mt: Oħloq images tal-ibbutjar bin-network għall-kernels kollha

en: This will take a few minutes.
mt: Dan jieħu diversi minuti.

en: Done!
mt: Lest!

en: Syncing server user list with client list, including root.
mt: Qed nissinkronizza l-lista ta' utenti mal-lista ta' klijenti, inkluż root.

en: In order to enable changes made for thin clients, the display manager must be restarted. Restart now?
mt: Sabiex tattwa l-bidliet li saru għall-klijenti ħfief, il-manager tad-display irid jiġi ristartjat. Trid tirristartjah issa?

en: Terminal Server Overview
mt: Sommarju tat-Terminal Server

en:         - Create Etherboot Enabled Boot Images:
            	To boot a kernel via etherboot, a special kernel/initrd image must be created.
            	mkinitrd-net does much of this work and drakTermServ is just a graphical 
            	interface to help manage/customize these images. To create the file 
            	/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in 
            	dhcpd.conf, you should create the etherboot images for at least one full kernel.
mt:         - Oħloq images tal-ibbutjar Etherboot:
            	Biex toħloq kernel bl-etherboot, irid jinħoloq kernel/initrd speċjali.
            	mkinitrd-net jagħmel ħafna minn dax-xogħol u drakTermServ huwa biss interfaċċja
            	grafika biex timmaniġġja/tippersonalizza dawn l-images. Biex toħloq il-fajl        	/etc/dhcpd.conf.etherboot-pcimap.include li huwa inkluż bħala include fil-fajl        	dhcpd.conf, trid toħloq images etherboot ta' l-inqas għal kernel wieħed sħiħ.

en:         - Maintain /etc/dhcpd.conf:
            	To net boot clients, each client needs a dhcpd.conf entry, assigning an IP 
            	address and net boot images to the machine. drakTermServ helps create/remove 
            	these entries.
    			
            	(PCI cards may omit the image - etherboot will request the correct image. 
    			You should also consider that when etherboot looks for the images, it expects 
    			names like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).
    			 
            	A typical dhcpd.conf stanza to support a diskless client looks like:
mt:         - Mantni /etc/dhcpd.conf:
            	Biex tibbutja klijenti min-network, kull klijent għandu bżonn element ta' dhcpd.conf 
            	li jassenja indirizz IP u images tal-ibbutjar bin-network lill-kompjuter. drakTermServ
            	jgħinek toħloq/tneħħi dawn l-elementi.			
            	(kards PCI jistgħu iħallu barra l-image - etherboot jistaqsi għall-image
    			korretta. Żomm ukoll f'moħħok li meta etherboot ifittex image, jistenna ismijiet
    			bħal boot-3c59x.nbi, mhux boot-3c59x.2.4.19-16mdk.nbi).
    			 
            	Konfigurazzjoni tipika ta' stanza dhcpd.conf għal klijent bla tiski jidher hekk:

en:         While you can use a pool of IP addresses, rather than setup a specific entry for
            a client machine, using a fixed address scheme facilitates using the functionality
            of client-specific configuration files that ClusterNFS provides.
    			
            Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'
            or 'fat'.  Thin clients run most software on the server via XDMCP, while fat clients run 
            most software on the client machine. A special inittab, %s is
            written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are 
            modified if thin clients are used, to enable XDMCP. Since there are security issues in 
            using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local
            subnet.
    			
            Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either 
            be 'true' or 'false'.  'true' enables root login at the client machine and allows local 
            hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled 
            by creating separate config files associated with the client's IP address and creating 
            read/write mount points to allow the client to alter the file. Once you are satisfied 
            with the configuration, you can remove root login privileges from the client.
    			
            Note: You must stop/start the server after adding or changing clients.
mt:         Filwaqt li tista' tuża "pool" ta' indirizzi IP, minflok tissettja element speċifiku
            għal kompjuter klijent, l-użu ta' skema ta' indirizzi fissi jiffaċilita l-użu ta'
            funzjonalità ta' konfigurazzjoni speċifika għal kull klijent, li jipprovdi ClusterNFS.			
            Nota: L-element "#type" huwa użat biss minn drakTermServ. Klijenti jistgħu ikunu
            jew "ħfief" jew "tqal". Klijenti ħfief iħaddmu l-biċċa l-kbira tas-softwer fuq is-
            server permezz ta' XDMCP, filwaqt li klijenti tqal iħaddmu l-biċċa l-kbira tas-softwer
            fuqhom stess. inittab speċjali, %s jinkiteb għal klijenti ħfief. Il-fajls ta'
            konfigurazzjoni tas-sistema xdm-config, kdmrc u gdm.conf huma modifikati jekk jintużaw
            klijenti ħfief, sabiex jaħdem XDMCP. Peress li hemm aspett ta' sigurtà fl-użu ta' XDMCP,
            hosts.deny u hosts.allow jiġu modifikati biex jillimitaw aċċess għas-subnet tan-network
            lokali.
    			
            Nota: L-element "#hdw_config" huwa wkoll użat biss minn drakTermServ. Klijenti jistgħu
            ikunu jew "true" jew "false". "True" jippermetti login tar-root mill-kompjuter
            klijent u jippermetti l-konfigurazzjoni tal-ħardwer tal-awdjo, maws u X, permezz ta' 
            l-għodda "drak". Dan huwa permess billi jinħolqu fajls separati ta' konfigurazzjoni
            assoċjati mal-indirizz IP tal-klijent u l-ħolqien ta' punti ta' mmuntar li jistgħu 
            jinkitbu biex iħallu lill-klijent jibdel fajls. Ladarba tkun sodisfatt bil-
            konfigurazzjoni, tista' tneħħi l-privileġġi ta' login "root" minn dan il-klijent.
    			
            Nota: trid twaqqaf u terġa' ttella' s-server wara li żżid jew tibdel klijenti.

en:         - Maintain /etc/exports:
            	Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
            	sets up the correct entry to allow anonymous access to the root filesystem from
            	diskless clients.
    
            	A typical exports entry for clusternfs is:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASK(rw,root_squash)
    			
            	With SUBNET/MASK being defined for your network.
mt:         - Mantni /etc/exports:
            	Clusternfs iħallik tesporta d-direttorju root għal fuq klijenti bla diski. drakTermServ
            	jissettjalek l-elementi korretti biex jippermetti aċċess anonimu lill-filesystem root
            	minn klijenti bla diski.
    
            	Element tipiku tal-exports għal clusternfs huwa:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASKRA(rw,root_squash)
    			
            	Bis-SUBNET/MASKRA definiti għan-network tiegħek.

en:         - Maintain %s:
            	For users to be able to log into the system from a diskless client, their entry in
            	/etc/shadow needs to be duplicated in %s. drakTermServ
            	helps in this respect by adding or removing system users from this file.
mt:         - Mantni %s:
            	Biex utenti jkunu jistgħu jilloggjaw fis-sistema minn klijent bla diski, l-element tagħhom
            	fil-fajl /etc/shadow irid ikun duplikat f' %s. drakTermServ
            	jgħinek f'dan ir-rigward billi jżid jew ineħħi utenti minn dan il-fajl.

en:         - Per client %s:
            	Through clusternfs, each diskless client can have its own unique configuration files
            	on the root filesystem of the server. By allowing local client hardware configuration, 
            	drakTermServ will help create these files.
mt:         - %s kull klijent:
            	Permezz ta' clusternfs, kull klijent bla diski jista' jkollu fajls ta' konfigurazzjoni
            	uniċi fil-filesystem root tas-server. Meta tippermetti konfigurazzjoni tal-ħardwer
            	lokali għall-klijenti, drakTermServ jgħinek toħloq dawn il-fajls.

en:         - Per client system configuration files:
            	Through clusternfs, each diskless client can have its own unique configuration files
            	on the root filesystem of the server. By allowing local client hardware configuration, 
            	clients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, 
            	/etc/sysconfig/keyboard on a per-client basis.
    
            Note: Enabling local client hardware configuration does enable root login to the terminal 
            server on each client machine that has this feature enabled.  Local configuration can be
            turned back off, retaining the configuration files, once the client machine is configured.
mt:         - Fajls ta' konfigurazzjoni għal kull klijent:
            	Permezz ta' clusternfs, kull klijent bla diski jista' jkollu fajls ta' konfigurazzjoni
            	uniċi fil-filesystem root tas-server. Meta tippermetti konfigurazzjoni tal-ħardwer
            	lokali għall-klijenti, -klijenti jistgħu jippersonalizzaw fajls bħal /etc/modules.conf,
            	/etc/sysconfig/mouse, /etc/sysconfig/keyboard għal kull klijent.
    
            	Nota: Li tippermetti konfigurazzjoni lokali tal-ħardwer ma jfissirc li tippermetti login
            	root fuq it-terminal server minn kull klijent li għandu din il-faċilità mixgħula.
            	Il-konfigurazzjoni lokali tista' tintefa, filwaqt li jinżammu l-fajls personalizzati,
            	ladarba l-klijent jintefa.

en:         - /etc/xinetd.d/tftp:
            	drakTermServ will configure this file to work in conjunction with the images created
            	by mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to 
            	each diskless client.
    
            	A typical TFTP configuration file looks like:
            		
            	service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            	}
            		
            	The changes here from the default installation are changing the disable flag to
            	'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
            	puts its images.
mt:         - /etc/xinetd.d/tftp:
            	drakTermServ jikkonfiguralek dan il-fajl biex jaħdem flimkien ma' images maħluqa minn
            	mkinitrd-net, u l-elementi li hemm f' /etc/dhcpd.conf, sabiex joffru l-image ta' l-
            	ibbutjar għal kull klijent bla diski.
            	Fajl tipiku ta' konfigurazzjoni TFTP jidher xi ħaġa hekk:
            		
            	service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            	}
            		
            	Il-bidliet hawn mill-installazzjoni impliċita hija li tibdel il-valur ta' "disable"
            	għal "no" u tibdel il-passaġġ tad-direttorju għal /var/lib/tfptboot, fejn 
            	mkinitrd-net jikteb l-images.

en:         - Create etherboot floppies/CDs:
            	The diskless client machines need either ROM images on the NIC, or a boot floppy
            	or CD to initiate the boot sequence.  drakTermServ will help generate these
            	images, based on the NIC in the client machine.
            		
            	A basic example of creating a boot floppy for a 3Com 3c509 manually:
            		
            	cat /usr/lib/etherboot/floppyload.bin \
            		/usr/share/etherboot/start16.bin \			
            		/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0
mt:         - Oħloq flopi/CD etherboot:
            	Il-kompjuters klijenti bla diski għandhom bżonn jew images fir ROM tan-NIC, jew
            	flopi jew CD biex jibbutjaw minnha.  drakTermServ jgħinek toħloq dawn l-images,
            	ibbażati fuq in-NIC tal-kompjuter klijent.
            		
            	Eżempju bażiku ta' kif toħloq flopi li tibbutja għal 3Com 3c509 manwalment:
            		
            	cat /usr/lib/etherboot/floppyload.bin \
            		/usr/share/etherboot/start16.bin \			
            		/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0

en: Boot Floppy
mt: Flopi "boot"

en: Boot ISO
mt: ISO "boot"

en: PXE Image
mt: Image PXE

en: Default kernel version
mt: verżjoni impliċita tal-kernel

en: Build Whole Kernel -->
mt: Ibni kernel sħiħ -->

en: No kernel selected!
mt: Ebda kernel m'hu magħżul!

en: Build Single NIC -->
mt: Ibni NIC waħda -->

en: No NIC selected!
mt: Ebda NIC magħżul!

en: Build All Kernels -->
mt: Ibni kernels kollha -->

en: <-- Delete
mt: <-- Ħassar

en: Delete All NBIs
mt: Ħassar NBIs kollha

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
mt: !!! Jindika li l-password fid-database tas-sistema huwa differenti minn 
    dak fid-database tat-Server tat-Terminal.
    Ħassar u erġa' żid il-user mas-Server tat-Terminal biex tippermetti login.

en: Add User -->
mt: Żid user -->

en: <-- Del User
mt: <-- Ħassar user

en: type: %s
mt: tip: %s

en: local config: %s
mt: konfig lokali: %s

en: Allow local hardware
    configuration.
mt: Ippermetti konfigurazzjoni 
    tal-ħardwer lokali

en: No net boot images created!
mt: Ebda "net boot image" ma nħolqot!

en: Thin Client
mt: Klijent ħafif

en: Allow Thin Clients
mt: Ippermetti klijenti ħfief

en: Add Client -->
mt: Żid klijent -->

en: type: fat
mt: Tip: tqil

en: type: thin
mt: Tip: ħafif

en: local config: false
mt: konfig. lokali: le

en: local config: true
mt: konfig. lokali: iva

en: <-- Edit Client
mt: <-- Editja klijent

en: Disable Local Config
mt: Itfi konfig. lokali

en: Delete Client
mt: Ħassar klijent

en: dhcpd Config...
mt: Konfigurazzjoni dhcpd...

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
mt: Trid tirristartja d-display manager sabiex il-bidliet kollha jkollhom efett.
    (service dm restart - fil-konsol)

en: Thin clients will not work with autologin. Disable autologin?
mt: Klijenti ħfief ma jaħdmux b' autologin. Trid titfih?

en: All clients will use %s
mt: Klijenti kollha jużaw %s

en: Broadcast Address:
mt: Indirizz xandir:

en: Domain Name:
mt: Isem id-dominju:

en: IP Range Start:
mt: Bidu ta' medda IP:

en: IP Range End:
mt: Tmiem ta' medda IP:

en: Append TS Includes To Existing Config
mt: Żid TS Includes ma' konf. eżistenti

en: Write Config
mt: Ikteb konf.

en: dhcpd Server Configuration
mt: Konfigurazzjoni server dhcpd

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
mt: Ħafna mill-valuri nkisbu mis-sistema 
    kurrenti. Tista' tibdilhom skond il-bżonn.

en: Dynamic IP Address Pool:
mt: "Pool" ta' indirizzi IP dinamiċi:

en: Please insert floppy disk:
mt: Jekk jogħġbok daħħal flopi:

en: Could not access the floppy!
mt: Ma nistax naċċessa l-flopi!

en: Floppy can be removed now
mt: Il-flopi tista' titneħħa issa

en: No floppy drive available!
mt: M'hemmx drajv flopi!

en: PXE image is %s/%s
mt: Image PXE huwa %s/%s

en: Error writing %s/%s
mt: Problema waqt kitba ta' %s/%s

en: Etherboot ISO image is %s
mt: Fajl ISO "etherboot" huwa %s

en: Something went wrong! - Is mkisofs installed?
mt: Kien hemm xi problema! - mkisofs huwa nstallat?

en: Need to create /etc/dhcpd.conf first!
mt: L-ewwel irid jinħoloq /etc/dhcp.d!

en: %s passwd bad in Terminal Server - rewriting...
mt: passwd %s ħażin fit-Terminal Server - qed jerġa' jinkiteb...

en: %s is not a user..
mt: %s mhux utent..

en: %s is already a Terminal Server user
mt: %s diġà utent tat-Terminal Server

en: Addition of %s to Terminal Server failed!
mt: Żieda ta' %s mat-Terminal Server falliet!

en: %s added to Terminal Server
mt: %s miżjud mat-Terminal Server

en: Deleted %s...
mt: Tħassar %s...

en: %s not found...
mt: %s ma nstabx...

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
mt: /etc/hosts.allow u /etc/hosts.deny diġà konfigurati - mhux mibdula

en: Configuration changed - restart clusternfs/dhcpd?
mt: Konfigurazzjoni mibdula - trid tirristartja clusternfs/dhcpd?

en: Error!
mt: Problema!

en: I can not find needed image file `%s'.
mt: Ma nistax insib il-fajl "image" meħtieġ "%s"

en: Auto Install Configurator
mt: Konfiguratur Awto-Installazzjoni

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Press ok to continue.
mt: Int issa se tikkonfigura flopi Awto-installazzjoni. Din il-faċilità tista' tkun perikoluża u trid tintuża bil-galbu.
    
    B'din il-faċilità tista' tirrepeti l-installazzjoni li għamilt fuq dan il-kompjuter, filwaqt li tiġi mistoqsi dwar ċerti passi biex tbiddillhom il-valur.
    
    Għal sigurtà massima, il-partizzjoni u formattjar tal-ħard disk qatt ma jsiru awtomatikament, tagħżel x'tagħżel waqt l-installazzjoni tal-kompjuter.
    
    Agħfas Ok biex tkompli

en: manual
mt: manwali

en: Automatic Steps Configuration
mt: Passi tal-Konfigurazzjoni Awtomatika

en: Please choose for each step whether it will replay like your install, or it will be manual
mt: Jekk jogħġbok agħżel għal kull pass, jekk tridhiex tkun bħal din l-installazzjoni, jew tkunx manwali

en: Creating auto install floppy
mt: Qed jinħoloq flopi awto-installazzjoni

en: Insert another blank floppy in drive %s (for drivers disk)
mt: Daħħal flopi vojta fid-drajv %s (għad-diska ta' drajvers)

en: Creating auto install floppy (drivers disk)
mt: Qed jinħoloq flopi awto-installazzjoni (diska ta' drajvers)

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
mt: 
    Merħba.
    
    Il-parametri għall-awto-installazzjoni jinstabu fil-parti tax-xellug.

en: Congratulations!
mt: Prosit!

en: The floppy has been successfully generated.
    You may now replay your installation.
mt: Il-flopi ġie ġenerat kif mitlub.
    Issa tista' tirrepeti l-installazzjoni.

en: Auto Install
mt: Awto-installazzjoni

en: Add an item
mt: Żid element

en: Remove the last item
mt: Neħħi l-aħħar element

en: tape
mt: tejp

en: Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention.
mt: Expect hija estensjoni għal-lingwa TCL li tippermetti sessjonijiet interattivi mingħajr interventi tal-utent.

en: Store the password for this system in drakbackup configuration.
mt: Żomm il-password għal din is-sistema fil-konfigurazzjoni drakbackup.

en: For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup.
mt: Għal CD multi-sessjoni, l-ewwel sessjoni biss tħassar is-CDRW. Altrimenti is-CDRW jitħassar qabel kull backup.

en: This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used.
mt: Din l-għażla tikkopja fajls li nbidlu. L-imġieba eżatta tiddependi jekk ingħażlitx modalità inkrementali jew differenzjali.

en: Incremental backups only save files that have changed or are new since the last backup.
mt: Backups inkrementali jiktbu biss fajls li nbidlu jew li huma ġodda mill-aħħar backup.

en: Differential backups only save files that have changed or are new since the original 'base' backup.
mt: Backups differenzjali jiktbu biss dawk il-fajls li nbidlu jew li huma ġodda mill-kopja "bażi" oriġinali.

en: This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server.
mt: Għandu jkun hemm utent lokali jew indirizz tal-email fejn jintbagħtu r-riżultati tal-backup. Trid tiddefinixxi wkoll server tal-email li qed jaħdem.

en: Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up.
mt: Fajls u mudelli elenkati ġo fajl jismu .backupignore fil-livell bażi ta' sett ta' direttorji jiġu esklużi mill-kopja tas-sigurtà.

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
mt: Għal kopji fuq mezzi oħra, il-fajls xorta jinħalqu fuq il-ħard disk, u mbgħad jitmexxew fuq il-mezz l-ieħor. Jekk tixgħel din l-għażla il-fajls tar jitneħħew mill-ħard disk wara l-kopja.

en: Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path.
mt: Ċerti protokolli, bħal rsync, jistgħu jiġu konfigurati min-naħa tas-server. Minflok tuża passaġġ ta' direttorju, għandek tuża isem il-modulu bħala l-passaġġ tas-servizz.

en: Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab.
mt: "Personalizzat" iħallik tispeċifika l-ġurnata u ħin li trid. L-għażliet l-oħrajn jużaw run-parts f' /etc/crontab.

en: No media selected for cron operation.
mt: Ebda media magħżula għal operazzjoni cron.

en: No interval selected for cron operation.
mt: Ebda intervall magħżula għal operazzjoni cron.

en: Interval cron not available as non-root
mt: Cron b'intervall mhux disponibbli għal utenti ħlief root

en: "%s" neither is a valid email nor is an existing local user!
mt: "%s" la huwa email validu anqas utent lokali.

en: "%s" is a local user, but you did not select a local smtp, so you must use a complete email address!
mt: "%s" huwa utent lokali, imma ma għażiltx smtp lokali, għalhekk trid tuża indirizz sħiħ tal-email.

en: Valid user list changed, rewriting config file.
mt: Lista ta' utenti validi nbidlet. Qed jerġa' jinkiteb fajl ta' konfigurazzjoni.

en: Old user list:
mt: Lista antika ta' utenti:

en: New user list:
mt: Lista ta' utenti ġodda:

en: 
                          DrakBackup Report
mt: 
                         Rapport DrakBackup

en: 
                          DrakBackup Daemon Report
mt: 
                        Rapport tad-daemon DrakBackup

en: 
                        DrakBackup Report Details
mt: 
                     Dettalji tar-Rapport DrakBackup

en: Total progress
mt: Progress totali

en: %s exists, delete?
    
    If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
mt: %s jeżisti, tħassru?
    
    Jekk diġà għamilt dan il-proċess, aktarx tkun trid tneħħi
    dan iċ-ċifrarju minn "authorized_keys" fuq is-server.

en: This may take a moment to generate the keys.
mt: Dan jista' jieħu ftit tal-ħin sakemm jiġġenera ċ-ċifrarji.

en: Cannot spawn %s.
mt: Ma nistax inħaddem %s.

en: No password prompt on %s at port %s
mt: Ebda prompt għall-password fuq %s, port %s

en: Bad password on %s
mt: Password ħażin fuq %s

en: Permission denied transferring %s to %s
mt: Permess miċħud fit-trasferiment ta' %s għal %s

en: Can not find %s on %s
mt: Ma nistax insib %s fuq %s

en: %s not responding
mt: %s m'hux jirrispondi

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s@%s
    
    without being prompted for a password.
mt: Trasferiment irnexxa
    Forsi trid tivverifika li tista' tagħmel login fuq is-server b':
    
    ssh -i %s %s@%s
    
    mingħajr ma jistaqsik għal password.

en: WebDAV remote site already in sync!
mt: Sit remot WebDAV diġà sinkronizzat!

en: WebDAV transfer failed!
mt: Trasferiment WebDAV falla!

en: No CD-R/DVD-R in drive!
mt: Ebda CDR/CDRW fid-drajv!

en: Does not appear to be recordable media!
mt: Dan ma jidhirx li huwa medja rekordjabbli

en: Not erasable media!
mt: Il-medja ma jistax jitħassar

en: This may take a moment to erase the media.
mt: Dan jista' jieħu ftit tal-ħin sakemm titħassar il-medja.

en: Permission problem accessing CD.
mt: Problema ta' permessi fl-aċċess tas-CD

en: No tape in %s!
mt: Ebda tejp f' %s!

en: Backup quota exceeded!
    %d MB used vs %d MB allocated.
mt: Qwota tal-backup inqabżet!
    %d MB użati vs %d MB allokati.

en: Backup system files...
mt: Ħu backup tal-fajls tas-sistema...

en: Hard Disk Backup files...
mt: Fajls ta' backup fil-ħard disk...

en: Backup User files...
mt: Ħu backup fajls tal-users...

en: Backup Other files...
mt: Ħu backup ta' fajls oħrajn...

en: Hard Disk Backup Progress...
mt: Progress tal-backup lill-ħard disk...

en: No changes to backup!
mt: Ebda bidliet biex jiġu kkupjati.

en: 
    Drakbackup activities via %s:
mt: 
    Attività Drakbackup permezz ta' %s:

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
mt: 
     Problema fil-konnessjoni FTP. Ma kienx possibbli nibgħat il-fajls bl-FTP.

en: Error during sending file via FTP. Please correct your FTP configuration.
mt: Problema biex jintbagħat fajl bl-FTP. Jekk jogħġbok ikkoreġi l-konfigurazzjoni FTP.

en: file list sent by FTP: %s
mt: lista ta' fajls mibgħuta bl-FTP: %s

en: 
    Drakbackup activities via CD:
mt: 
    Attività Drakbackup permezz ta' CD:

en: 
    Drakbackup activities via tape:
mt: 
    Attività Drakbackup permezz ta' tejp:

en: Error sending mail. Your report mail was not sent.
mt: Problema waqt li qed jintbagħat imejl. Ir-rapport ma ntbagħatx.

en:  Error while sending mail.
mt:  Problema biex jintbagħat imejl.

en: Can not create catalog!
mt: Ma nistax noħloq katalgu!

en: 
    Please check all options that you need.
mt: 
    Jekk jogħġbok immarka l-għażliet kollha li għandek bżonn.

en: These options can backup and restore all files in your /etc directory.
mt: Dawn l-għażliet jieħdu kopja tas-sigurtà u jirrestawraw il-fajls kollha tad-direttorju /etc.

en: Backup your System files. (/etc directory)
mt: Ħu kopja tas-sigurtà tal-fajls tas-sistema (direttorju /etc)

en: Use Incremental/Differential Backups  (do not replace old backups)
mt: Uża kopji tas-sigurtà inkrementali/differenzjali  (tħassarx l-antiki)

en: Use Incremental Backups
mt: Uża kopji tas-sigurtà inkrementali

en: Use Differential Backups
mt: Uża backup differenzjali

en: Do not include critical files (passwd, group, fstab)
mt: Tinkludix fajls kritiċi (passwd, group, fstab)

en: With this option you will be able to restore any version
     of your /etc directory.
mt: B'din l-għażla tkun tista' tirrestawra kwalinkwa verżjoni
    tad-direttorju /etc.

en: Please check all users that you want to include in your backup.
mt: Jekk jogħġbok agħżel il-users kollha li trid tinkludi f'din il-kopja tas-sigurtà.

en: Do not include the browser cache
mt: Tinkludix il-cache tal-browser

en: Select the files or directories and click on 'OK'
mt: Agħżel fajls jew direttorju u klikkja "OK"

en: Remove Selected
mt: Neħħi l-magħżula

en: Use network connection to backup
mt: Uża konnessjoni bin-network għall-kopja tas-sigurtà

en: Net Method:
mt: Metodu net:

en: Use Expect for SSH
mt: Uża "Expect" għal SSH

en: Create/Transfer backup keys for SSH
mt: Oħloq/ibgħat ċifrarji tal-backup għal SSH

en: Transfer Now
mt: Ittrasferixxi issa

en: Other (not drakbackup) keys in place already
mt: Ċifrarji oħrajn (mhux drakbackup) diġà f'posthom

en: Host name or IP.
mt: Isem jew IP tal-kompjuter

en: Directory (or module) to put the backup on this host.
mt: Direttorju (jew modulu) fejn trid tpoġġi l-kopja tas-sigurtà fuq il-kompjuter.

en: Remember this password
mt: Ftakar dan il-password

en: Need hostname, username and password!
mt: Hemm bżonn kompjuter, user u password!

en: Use CD-R/DVD-R to backup
mt: Uża CD/DVDROM għall-kopja tas-sigurtà

en: Choose your CD/DVD device
mt: Agħżel apparat CD/DVD

en: Choose your CD/DVD media size
mt: Agħżel id-daqs tas-CD/DVD

en: Multisession CD
mt: CD multi-sessjoni

en: CDRW media
mt: media CDRW

en: Erase your RW media (1st Session)
mt: Ħassar il-medja RW (1el sessjoni)

en:  Erase Now
mt:  Ħassar issa

en: DVD+RW media
mt: media DVD+RW

en: DVD-R media
mt: media DVD-R

en: DVDRAM device
mt: tagħmir DVDRAM

en: No CD device defined!
mt: Apparat CD mhux speċifikat!

en: Use tape to backup
mt: Uża tejp għall-kopja tas-sigurtà

en: Device name to use for backup
mt: Isem tal-apparat għall-kopja tas-sigurtà

en: Backup directly to tape
mt: Backup direttament fuq tejp

en: Do not rewind tape after backup
mt: Tagħmilx rewind wara l-kopja tas-sigurtà

en: Erase tape before backup
mt: Ħassar tejp qabel kopja tas-sigurtà

en: Eject tape after the backup
mt: Oħroġ tejp wara l-kopja tas-sigurtà

en: Enter the directory to save to:
mt: Daħħal id-direttorju fejn tikteb:

en: Directory to save to
mt: Direttorju fejn tikteb:

en: Maximum size
     allowed for Drakbackup (MB)
mt: Daqs massimu
     permess għal DrakBackup (MB)

en: CD-R / DVD-R
mt: CDROM / DVDROM

en: HardDrive / NFS
mt: Ħard disk / NFS

en: hourly
mt: kull siegħa

en: daily
mt: kuljum

en: weekly
mt: kull ġimgħa

en: monthly
mt: kull xahar

en: custom
mt: personalizzat

en: January
mt: Jannar

en: February
mt: Frar

en: March
mt: Marzu

en: May
mt: Mejju

en: June
mt: Ġunju

en: July
mt: Lulju

en: August
mt: Awissu

en: September
mt: Settembru

en: October
mt: Ottubru

en: November
mt: Novembru

en: December
mt: Diċembru

en: Sunday
mt: il-Ħadd

en: Monday
mt: it-Tnejn

en: Tuesday
mt: it-Tlieta

en: Wednesday
mt: l-Erbgħa

en: Thursday
mt: il-Ħamis

en: Friday
mt: il-Ġimgħa

en: Saturday
mt: is-Sibt

en: Use daemon
mt: Uża daemon

en: Please choose the time interval between each backup
mt: Jekk jogħġbok agħżel l-intervall ta' ħin għal kull kopja tas-sigurtà

en: Custom setup/crontab entry:
mt: Element personalizzat setup/crontab:

en: Minute
mt: Minuti

en: Hour
mt: Siegħa

en: Day
mt: Jum

en: Month
mt: Xahar

en: Weekday
mt: Ġurnata tal-ġimgħa

en: Please choose the media for backup.
mt: Jekk jogħġbok agħżel il-media għall-kopja tas-sigurtà.

en: Please be sure that the cron daemon is included in your services.
mt: Aċċerta li d-daemon "cron" huwa nkluż fis-servizzi.

en: Note that currently all 'net' media also use the hard drive.
mt: Innota li bħalissa l-medja "net" kollha jużaw il-ħard disk ukoll.

en: Please choose the compression type
mt: jekk jogħġbok agħżel it-tip ta' kompressjoni

en: Use .backupignore files
mt: Uża fajls .backupignore

en: Send mail report after each backup to:
mt: Ibgħat rapport bl-imejl wara kull kopja tas-sigurtà lill:

en: SMTP server for mail:
mt: Server SMTP għall-imejl:

en: Delete Hard Drive tar files after backup to other media.
mt: Ħassar il-fajls tar minn fuq il-ħard disk wara li ssir il-kopja fuq media ieħor

en: What
mt: Xiex

en: Where
mt: Fejn

en: When
mt: Meta

en: More Options
mt: Iżjed għażliet

en: Backup destination not configured...
mt: Destinazzjoni tal-kopja mhix ikkonfigurata

en: Drakbackup Configuration
mt: Konfigurazzjoni DrakBackup

en: Please choose where you want to backup
mt: Jekk jogħġbok agħżel fejn trid tieħu kopja tas-sigurtà

en: Hard Drive used to prepare backups for all media
mt: Ħard disk uża biex tipprepara l-backups għall-media kollha.

en: Across Network
mt: Fuq in-network

en: On CD-R
mt: fuq CD-R

en: On Tape Device
mt: Fuq tagħmir Tejp

en: Backup Users
mt: Utenti tal-backup

en:  (Default is all users)
mt: (impliċitament l-utenti kollha)

en: Please choose what you want to backup
mt: Jekk jogħġbok agħżel xi trid tikkopja

en: Backup System
mt: Ħu kopja tas-sistema

en: Select user manually
mt: Agħżel user manwalment

en: Please select data to backup...
mt: Jekk jogħġbok agħżel informazzjoni x'tikkopja...

en: 
    Backup Sources:
mt: 
    Sorsi tal-kopji tas-sigurtà:

en: 
    - System Files:
mt: 
    - Fajls tas-sistema:

en: 
    - User Files:
mt: 
    - Fajls tal-user:

en: 
    - Other Files:
mt: 
    - Fajls oħrajn:

en: 
    - Save on Hard drive on path: %s
mt: 
    - Ikteb fuq ħard disk fid-direttorju: %s

en: 	Limit disk usage to %s MB
mt: 	Illimita l-użu tad-diska għal %s MB

en: 
    - Delete hard drive tar files after backup.
mt: 
    - Ħassar il-fajls tar minn fuq il-ħard disk wara l-kopja tas-sigurtà

en: 
    - Burn to CD
mt: 
    - Aħraq fuq CD

en:  on device: %s
mt:  fuq apparat: %s

en:  (multi-session)
mt:  (multi-sessjoni)

en: 
    - Save to Tape on device: %s
mt: 
    - Ikteb fuq tejp fuq l-apparat: %s

en: 		Erase=%s
mt: 		Ħassar=%s

en: 	Backup directly to Tape
mt: 	Backup direttament fuq tejp

en: 
    - Save via %s on host: %s
mt: 
    - Ikteb permezz ta' %s fuq kompjuter: %s

en: 		 user name: %s
    		 on path: %s
mt: 		 isem ta' user: %s
    		 fuq direttorju: %s

en: 
    - Options:
mt: 
    - Għażliet:

en: 	Do not include System Files
mt: 	Tinkludix fajls tas-sistema

en: 	Backups use tar and bzip2
mt: 	Kopji tas-sigurtà jużaw tar u bzip2

en: 	Backups use tar and gzip
mt: 	Kopji tas-sigurtà jużaw tar u gzip

en: 	Backups use tar only
mt: 	Kopji jużaw tar biss

en: 	Use .backupignore files
mt: 	Uża fajls .backupignore

en: 	Send mail to %s
mt: 	Ibgħat imejl lil %s

en: 	Using SMTP server %s
mt: 	Uża server SMTP %s

en: 
    - Daemon, %s via:
mt: 
    - Daemon (%s) permezz ta':

en: 	-Hard drive.
mt: 	-Ħard disk.

en: 	-Tape
mt: 	-Tejp

en: 	-Network by FTP.
mt: 	-Network bl-FTP.

en: 	-Network by SSH.
mt: 	-Network bl-SSH.

en: 	-Network by rsync.
mt: 	-Network bl-rsync.

en: 	-Network by webdav.
mt: 	-Network bil-WebDAV.

en: No configuration, please click Wizard or Advanced.
mt: Ebda konfigurazzjoni, agħżel Saħħar jew Avvanzat

en: List of data to restore:
mt: Lista ta' informazzjoni x'tirrestawra:

en: - Restore System Files.
mt: - Irrestawra fajls tas-sistema.

en:    - from date: %s %s
mt:    - minn data: %s %s

en: - Restore User Files:
mt: - Irrestawra fajls tal-utenti:

en: - Restore Other Files:
mt: - Irrestawra fajls oħrajn:

en: List of data corrupted:
mt: Lista ta' informazzjoni korrotta:

en: Please uncheck or remove it on next time.
mt: Jekk jogħġbok neħħiha d-darba li jmiss.

en: Backup files are corrupted
mt: Fajls tal-kopja tas-sigurtà ġew korrotti

en:           All of your selected data have been
mt:            L-informazzjoni kollha magħżula ġiet

en:           Successfully Restored on %s
mt:          restawrata għal fuq %s

en:          Restore Configuration
mt:       Konfigurazzjoni ta' Restawr

en: OK to restore the other files.
mt: OK biex tirrestawra fajls oħra.

en: User list to restore (only the most recent date per user is important)
mt: Lista ta' users x'tirrestawra (l-iżjed data riċenti ta' kull user biss importanti)

en: Please choose the date to restore:
mt: jekk jogħġbok agħżel data x' tirrestawra:

en: Restore from Hard Disk.
mt: Irrestawra mill-ħard disk.

en: Enter the directory where backups are stored
mt: Daħħal id-direttorju fejn qegħdin il-kopji tas-sigurtà

en: Directory with backups
mt: Direttorju ta' kopji tas-sigurtà

en: Select another media to restore from
mt: Agħżel medja ieħor biex tirrestawra minnu

en: Other Media
mt: Media oħrajn

en: Restore system
mt: Irrestawra sistema

en: Restore Users
mt: Irrestawra users

en: Restore Other
mt: Irrestawra ieħor

en: Select path to restore (instead of /)
mt: Agħżel direttorju biex tirrestawra (minflok / )

en: Path To Restore To
mt: Passaġġ fejn trid tirrestawra

en: Do new backup before restore (only for incremental backups.)
mt: Agħmel kopja tas-sigurtà ġdida qabel tirrestawra (għal kopji tas-sigurtà inkrementali biss)

en: Remove user directories before restore.
mt: Neħħi d-direttorji tal-users qabel tirrestawra.

en: Filename text substring to search for (empty string matches all):
mt: Parti minn isem ta' fajl li trid issib (string vojta tfisser kollox):

en: Search Backups
mt: Fittex kopji ta' sigurtà

en: No matches found...
mt: Ma nstab xejn li jaqbel...

en: Restore Selected
mt: Irrestawra l-magħżula

en: Click date/time to see backup files.
    Ctrl-Click files to select multiple files.
mt: Klikkja data/ħin biex tara fajls tal-backup.
    Ctrl-klikkja fajls biex tagħżel iżjed minn wieħed.

en: Restore Selected
    Catalog Entry
mt: Irrestawra l-element
    magħżul tal-katalgu

en: Restore Selected
    Files
mt: Irrestawra l-fajls
    magħżula

en: Backup files not found at %s.
mt: Fajls tal-kopja tas-sigurtà ma nstabux f' %s.

en: Restore From CD
mt: Irrestawra mis-CD

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
mt: Daħħal is-CD bit-tikketta tal-volum %s
    fid-drajv CD taħt punt ta' mmuntar /mnt/cdrom

en: Not the correct CD label. Disk is labelled %s.
mt: Dan is-CD m'għandux it-tikketta tal-volum tajba. Id-diska mmarkata %s.

en: Restore From Tape
mt: Irrestawra mit-tejp

en: Insert the tape with volume label %s
     in the tape drive device %s
mt: Daħħal it-tejp bit-tikketta tal-volum %s
    fl-apparat tat-tejp %s

en: Not the correct tape label. Tape is labelled %s.
mt: Dan it-tejp m'għandux it-tikketta tal-volum tajba. It-tejp immarkat %s.

en: Restore Via Network
mt: Irrestawra permezz tan-network

en: Restore Via Network Protocol: %s
mt: Irrestawra permezz tal-protokoll tan-network: %s

en: Host Name
mt: Isem tal-kompjuter

en: Host Path or Module
mt: Passaġġ jew modulu tal-kompjuter

en: Password required
mt: Password meħtieġa

en: Username required
mt: Isem ta' user meħtieġ

en: Hostname required
mt: Isem tal-kompjuter meħtieġ

en: Path or Module required
mt: Passaġġ jew modulu meħtieġ

en: Files Restored...
mt: Fajls restawrati...

en: Restore Failed...
mt: Restawr falla...

en: %s not retrieved...
mt: %s mhux miksub...

en: Search for files to restore
mt: Fittex fajls biex tirrestawra

en: Restore all backups
mt: Irrestawra l-kopji tas-sigurtà kollha

en: Custom Restore
mt: Restawr personalizzat

en: Restore From Catalog
mt: Irrestawra mill-katalgu

en: Unable to find backups to restore...
mt: Ma nistax insib kopji ta' sigurtà x'nirrestawra...

en: Verify that %s is the correct path
mt: Ivverifika li %s huwa l-passaġġ tajjeb

en:  and the CD is in the drive
mt: u li s-CD qiegħed fid-drajv

en: Backups on unmountable media - Use Catalog to restore
mt: Kopji fuq media li ma jistgħux jiġu mmuntati. Uża l-katalgu biex tirrestawra

en: CD in place - continue.
mt: CD f'postu - kompli.

en: Browse to new restore repository.
mt: Fittex repożitorju tar-restawr ġdid.

en: Directory To Restore From
mt: Direttorju minn fejn trid tirrestawra

en: Restore Progress
mt: Progress tar-restawr

en: Build Backup
mt: Ibni kopja tas-sigurtà

en: Restore
mt: Irrestawra

en: The following packages need to be installed:
mt: Dawn il-pakketti jridu jiġu nstallati:

en: Please select data to restore...
mt: Jekk jogħġbok agħżel informazzjoni x'tirrestawra

en: Backup system files
mt: Ħu kopja tas-sigurtà tal-fajls tas-sistema

en: Backup user files
mt: Ħu kopja tas-sigurtà tal-fajls tal-users

en: Backup other files
mt: Ħu kopja tas-sigurtà ta' fajls oħrajn

en: Total Progress
mt: Progress totali

en: Sending files by FTP
mt: Qed nibgħat fajls bl-FTP

en: Sending files...
mt: Qed nibgħat fajls...

en: Backup Now from configuration file
mt: Ħu kopja tas-sigurtà issa minn fajl ta' konfigurazzjoni

en: View Backup Configuration.
mt: Ara konfigurazzjoni tal-kopja tas-sigurtà.

en: Wizard Configuration
mt: Konfigurazzjoni b'Saħħar

en: Advanced Configuration
mt: Konfigurazzjoni Avvanzata

en: View Configuration
mt: Ara Konfigurazzjoni

en: View Last Log
mt: Ara l-aħħar log

en: Backup Now
mt: Ħu backup issa

en: No configuration file found 
    please click Wizard or Advanced.
mt: Ebda fajl ta' konfigurazzjoni ma nstab.
    Agħżel Saħħar jew Avvanzat.

en: Graphical boot theme selection
mt: Għażla tat-tema tal-ibbutjar

en: System mode
mt: Modalità sistema

en: /_File
mt: /_Fajl

en: /File/_Quit
mt: /Fajl/O_ħroġ

en: Install themes
mt: Installa temi

en: Create new theme
mt: Oħloq tema ġdida

en: Use graphical boot
mt: Uża boot grafiku

en: Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool.
mt: Il-bootloader tas-sistema mhux f'modalità framebuffer. Biex tattiva boot grafiku, agħżel modalità ta' grafika mill-għodda ta' konfigurazzjoni tal-bootloader.

en: Do you want to configure it now?
mt: Trid tikkonfigura issa?

en: Theme
mt: Tema

en: Display theme
    under console
mt: Uri tema
    fil-konsol

en: Launch the graphical environment when your system starts
mt: Ħaddem X-Windows malli titla'

en: No, I do not want autologin
mt: Le, ma rridx awto-login

en: Yes, I want autologin with this (user, desktop)
mt: Iva, rrid awto-login b'dan il-user u desktop

en: Default user
mt: User impliċitu

en: Default desktop
mt: Desktop impliċitu

en: Please choose a video mode, it will be applied to each of the boot entries selected below.
    Be sure your video card supports the mode you choose.
mt: Jekk jogħġbok agħżel modalità ta' video. Dan jiġi applikat għall-elementi kollha ta' boot magħżula taħt.
    Aċċerta li l-kard tal-video tissapportja l-modalità li tagħżel.

en: Mandrakelinux Bug Report Tool
mt: Għodda tal-Mandrakelinux biex tirrapporta bugs

en: Mandrakelinux Control Center
mt: Ċentru tal-Kontroll Mandrakelinux

en: Synchronization tool
mt: Għodda tas-sinkronizzazzjoni

en: Standalone Tools
mt: Għodda indipendenti

en: Remote Control
mt: Kontroll remot

en: Software Manager
mt: Maniġġjar tas-softwer

en: Windows Migration tool
mt: Għodda għall-migrazzjoni mill-Windows

en: Configuration Wizards
mt: Sħaħar tal-Konfigurazzjoni

en: Find Package
mt: Sib pakkett

en: Package:
mt: Pakkett:

en: Report
mt: Rapport

en: Not installed
mt: Mhux installat

en: Package not installed
mt: Pakkett mhux installat

en: not defined
mt: mhux definit

en: Change Time Zone
mt: Ibdel iż-żona tal-ħin

en: Timezone - DrakClock
mt: Żona orarja - DrakClock

en: Is your hardware clock set to GMT?
mt: L-arloġġ tal-kompjuter issettjat GMT?

en: Network Time Protocol
mt: Protokoll tal-ħin tan-network

en: Your computer can synchronize its clock
     with a remote time server using NTP
mt: Il-kompjuter jista' jissinkronizza l-arloġġ ma' 
    server remot tal-ħin permezz ta' NTP

en: Enable Network Time Protocol
mt: Ixgħel Network Time Protocol

en: Could not synchronize with %s.
mt: Ma stajtx nissinkronizza ma' %s

en: Reset
mt: Irrisettja

en: We need to install ntp package
     to enable Network Time Protocol
    
    Do you want to install ntp?
mt: Għandna bżonn ninstallaw il-pakkett ntp
    biex nużaw in-Network Time Protocol
    
    Trid tinstalla ntp?

en: Network configuration (%d adapters)
mt: Konfigurazzjoni network (%d adattur/i)

en: Interface:
mt: Interfaċċja:

en: Wait please
mt: Stenna ftit

en: Interface
mt: Interfaċċja

en: State
mt: Stat

en: Hostname:
mt: Isem tal-kompjuter:

en: Configure hostname...
mt: Ikkonfigura isem il-kompjuter...

en: LAN configuration
mt: Konfigurazzjoni LAN

en: Configure Local Area Network...
mt: Ikkonfigura network lokali (LAN)...

en: Apply
mt: Applika

en: Manage connections
mt: Immaniġġja konnessjonijiet

en: Device selected
mt: Tagħmir magħżul

en: IP configuration
mt: Konfigurazzjoni IP

en: DNS servers
mt: Servers DNS

en: Search Domain
mt: Fittex dominju

en: static
mt: statiku

en: Metric
mt: Metriku

en: Line termination
mt: Terminazzjoni tal-linja

en: Modem timeout
mt: Skadenza tal-ħin tal-modem

en: Use lock file
mt: Uża fajl biex issakkar

en: Wait for dialup tone before dialing
mt: Stenna ton ta' daljar qabel tiddalja

en: Modem sound
mt: Ħoss tal-modem

en: Enable
mt: Ixgħel

en: Disable
mt: Itfi

en: Media class
mt: Klassi ta' medja

en: Module name
mt: Isem tal-modulu

en: Mac Address
mt: Indirizz Mac

en: Location on the bus
mt: Post fuq il-bus

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
mt: Ebda adattur tan-network ethernet ma nstab fuq is-sistema tiegħek. Jekk jogħġbok ħaddem l-għodda tal-konfigurazzjoni tal-ħardwer.

en: Remove a network interface
mt: Neħħi interfaċċja tan-network

en: Select the network interface to remove:
mt: Agħżel interfaċċja tan-network biex tneħħi:

en: An error occurred while deleting the "%s" network interface:
    
    %s
mt: Kien hemm problema waqt it-tneħħija tal-interfaċċja tan-network "%s":
    
    %s

en: Congratulations, the "%s" network interface has been successfully deleted
mt: Prosit, l-interfaċċja tan-network "%s" tneħħiet

en: No IP
mt: Ebda IP

en: No Mask
mt: Ebda maskra

en: up
mt: imtella'

en: down
mt: wieqaf

en: Connected
mt: Imqabbad

en: Not connected
mt: Mhux imqabbad

en: Disconnect...
mt: Aqta'...

en: Connect...
mt: Aqbad...

en: Warning, another Internet connection has been detected, maybe using your network
mt: Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network tiegħek

en: Deactivate now
mt: Itfi issa

en: Activate now
mt: Ixgħel issa

en: You do not have any configured interface.
    Configure them first by clicking on 'Configure'
mt: M'għandek ebda interfaċċja kkonfigurata.
    L-ewwel ikkonfigurahom billi tikklikkja "ikkonfigura"

en: LAN Configuration
mt: Konfigurazzjoni LAN

en: Adapter %s: %s
mt: Adattur %s: %s

en: Boot Protocol
mt: Protokoll Boot

en: Started on boot
mt: Tella' fil-bidu

en: This interface has not been configured yet.
    Run the "Add an interface" assistant from the Mandrakelinux Control Center
mt: Din l-interfaċċja għadha ma ġietx ikkonfigurata.
    Ħaddem is-saħħar "Żid interfaċċja" miċ-Ċentru tal-Kontroll Mandrakelinux

note: -PO: here "Add Connection" should be translated the same was as in control-center
en: You do not have any configured Internet connection.
    Run the "%s" assistant from the Mandrakelinux Control Center
mt: M'għandek ebda konnessjoni mal-internet ikkonfigurata.
    Ħaddem is-saħħar "%s" miċ-Ċentru tal-Kontroll Mandrakelinux

en: Internet connection configuration
mt: Konfigurazzjoni tal-konnessjoni internet

en: Third DNS server (optional)
mt: It-tielet server DNS (opzjonali)

en: Internet Connection Configuration
mt: Konfigurazzjoni tal-konnessjoni internet

en: Internet access
mt: Aċċess għall-internet

en: Connection type:
mt: Tip ta' konnessjoni:

en: Status:
mt: Stat:

en: Choosing a display manager
mt: Agħżel "display manager"

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
mt: X11 Display Manager iħallik tilloggja grafikament fis-sistema
    permezz tas-sistema X Windows, u jippermetti iżjed minn sessjoni
    waħda X fl-istess ħin.

en: The change is done, do you want to restart the dm service?
mt: Il-bidliet saru; trid tirristartja s-servizz dm?

en: You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?
mt: Int se tagħlaq il-programmi kollha u titlef is-sessjoni kurrenti.
    Żgur li trid tirristartja s-servizz dm?

en: Boot disk creation
mt: Ħolqien ta' diska "boot"

en: General
mt: Ġenerali

en: Device
mt: Apparat

en: Kernel version
mt: Verżjoni tal-kernel

en: Preferences
mt: Preferenzi

en: Advanced preferences
mt: Għażliet avvanzati

en: Size
mt: Daqs

en: Mkinitrd optional arguments
mt: Argumenti opzjonali mkinitrd

en: force
mt: ġiegħel

en: omit raid modules
mt: neħħi moduli RAID

en: if needed
mt: jekk meħtieġ

en: omit scsi modules
mt: neħħi moduli SCSI

en: Add a module
mt: Żid modulu

en: Remove a module
mt: Neħħi modulu

en: Be sure a media is present for the device %s
mt: Aċċerta li hemm diska fl-apparat %s

en: There is no medium or it is write-protected for device %s.
    Please insert one.
mt: M'hemmx diska fl-apparat %s, jew ma tistax tinkiteb.
    Jekk jogħġbok daħħal waħda.

en: Unable to fork: %s
mt: Ma stajtx noħloq proċess: %s

en: Floppy creation completed
mt: Ħolqien ta' flopi lest

en: The creation of the boot floppy has been successfully completed
mt: Il-ħolqien ta' flopi għall-boot irnexxa

note: -PO: Do not alter the <span ..> and </span> tags
en: Unable to properly close mkbootdisk:
    
    <span foreground="Red"><tt>%s</tt></span>
mt: Ma stajtx nagħlaq mkbootdisk sew: 
    
    <span foreground="Red"><tt>%s</tt></span>

en: Search installed fonts
mt: Fittex fonts installati

en: Unselect fonts installed
mt: Neħħi l-marka minn fonts installati

en: parse all fonts
mt: fittex fonts kollha

en: No fonts found
mt: Ma nstabux fonts

en: done
mt: lest

en: Could not find any font in your mounted partitions
mt: ma stajt insib ebda fonts fuq il-partizzjonijiet immuntati

en: Reselect correct fonts
mt: Erġa' agħżel fonts tajbin

en: Could not find any font.
mt: Ma stajtx insib fonts.

en: Search for fonts in installed list
mt: Fittex fonts fil-lista ta' nstallati

en: %s fonts conversion
mt: Konverżjoni ta' fonts %s

en: Fonts copy
mt: Ikkupjar ta' fonts

en: True Type fonts installation
mt: Installazzjoni ta' fonts TrueType

en: please wait during ttmkfdir...
mt: stenna sakemm għaddej ttmkfdir...

en: True Type install done
mt: Installazzjoni TrueType lest

en: type1inst building
mt: qed nibni type1inst

en: Ghostscript referencing
mt: Riferenzi għall-Ghostscript

en: Suppress Temporary Files
mt: Issopprimi fajls temporanji

en: Restart XFS
mt: Irristartja XFS

en: Suppress Fonts Files
mt: Issopprimi fajls ta' fonts

en: xfs restart
mt: irristartja l-xfs

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
mt: Qabel tinstalla fonts, kun ċert li għandek id-dritt tużahom u tinstallahom fuq is-sistema.
    
    -Tista' tinstalla fonts bis-sistema normali. F'każi rari, fonts ħżiena jistgħu iwaħħlulek is-server X.

en: Font List
mt: Lista ta' fonts

en: About
mt: Dwar

en: Uninstall
mt: Neħħi

en: Import
mt: Importa

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: Copyright (C) 2001-2002 by Mandrakesoft 
    
    
           DUPONT Sebastien (original version)
    
           CHAUMETTE Damien <dchaumette@mandrakesoft.com>
    
           VIGNAUD Thierry <tvignaud@mandrakesoft.com>
mt: Copyright (C) 2001-2002 ta' Mandrakesoft 
    
    
           DUPONT Sebastien (verżjoni oriġinali)
    
           CHAUMETTE Damien <dchaumette@mandrakesoft.com>
    
           VIGNAUD Thierry <tvignaud@mandrakesoft.com>

en: This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
mt: Dan il-programm huwa softwer ħieles; tista' tiddistribwih u/jew tibdlu
     skond it-termini tal-Liċenzja Ġenerali Pubblika (GPL) GNU, kif ippubblikata
     mill-Free Software Foundation; jew verżjoni 2 tal-liċenzja, jew (skond il-
     ġudizzju tiegħek) waħda iżjed riċenti.
    
     Dan il-programm huwa distribwit bl-isperanza li jkun utli, imma
     MINNGĦAJR EBDA GARANZIJA; minngħajr saħansitra l-garanzija impliċita 
     ta' MERKANTABILITÀ jew LI HU ADEGWAT GĦAL UŻU PARTIKULARI. Ara
     l-Liċenzja Ġenerali Pubblika GNU (GNU General Public License) għal iżjed
     dettalji.
    
     Għandek tirċievi kopja tal-Liċenzja Ġenerali Pubblika GNU flimkien ma' dan
     il-programm. Jekk le, ikteb lill-Free Software Foundation, Inc., 
     59, Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: Choose the applications that will support the fonts:
mt: Agħżel il-programmi li se jużaw il-fonts:

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
mt: Qabel tinstalla fonts, kun ċert li għandek id-dritt tużahom u tinstallahom fuq is-sistema.
    
    Tista' tinstalla fonts bis-sistema normali. F'każi rari, fonts ħżiena jistgħu iwaħħlulek is-server X.

en: Generic Printers
mt: Printers ġeneriċi

en: Select the font file or directory and click on 'Add'
mt: Agħżel il-fajl tal-font jew direttorju u agħfas "Żid"

en: File Selection
mt: Għażla ta' fajls

en: You've not selected any font
mt: Ma għażilt ebda font

en: Import fonts
mt: Importa fonts

en: Install fonts
mt: Installa fonts

en: click here if you are sure.
mt: Klikkja hawn jekk inti ċert

en: here if no.
mt: Klikkja hawn jekk m'intix ċert.

en: Unselected All
mt: Xejn magħżul

en: Selected All
mt: Kollox magħżul

en: Remove List
mt: Neħħi lista

en: Importing fonts
mt: Qed jiġu importati fonts

en: Initial tests
mt: Testijiet preliminari

en: Copy fonts on your system
mt: Ikkopja fonts għas-sistema

en: Install & convert Fonts
mt: Installa u kkonverti fonts

en: Post Install
mt: Wara l-installazzjoni

en: Remove fonts on your system
mt: Neħħi fonts mis-sistema

en: Post Uninstall
mt: Wara t-tneħħija

en: Internet Connection Sharing
mt: Qsim tal-konnessjoni tal-internet

en: Sorry, we support only 2.4 and above kernels.
mt: Jiddispjaċini, nissapportjaw biss kernels minn 2.4 'il fuq.

en: Internet Connection Sharing currently disabled
mt: Il-qsim tal-konnessjoni tal-internet huwa mitfi

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
mt: Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.
    Bħalissa huwa mitfi.
    
    X'tixtieq tagħmel?

en: enable
mt: ħaddem

en: reconfigure
mt: irrikonfigura

en: dismiss
mt: ikkanċella

en: Enabling servers...
mt: Qed intella' s-servers...

en: Internet Connection Sharing is now enabled.
mt: Qsim tal-konnessjoni tal-internet issa mixgħul.

en: Internet Connection Sharing currently enabled
mt: Il-qsim tal-konnessjoni tal-internet bħalissa mixgħul

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
mt: Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.
    Bħalissa huwa mixgħul.
    
    X'tixtieq tagħmel?

en: disable
mt: itfi

en: Disabling servers...
mt: Qed inniżżel is-servers...

en: Internet Connection Sharing is now disabled.
mt: Il-qsim tal-konnessjoni tal-internet issa mitfi

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
mt: Se tikkonfigura l-kompjuter biex jaqsam il-konnessjoni tal-internet.
    B'din il-faċilità, kompjuters oħra fuq in-network tiegħek ikunu jistgħu jużaw il-konnessjoni mal-internet ta' dan il-kompjuter.
    
    Aċċerta li għandek l-aċċess għan-network/internet mixgħul billi tuża drakconnect qabel tkompli.
    
    Nota: irid ikollok adattur tal-internet dedikat biex tissettja n-network lokali (LAN)

en: Interface %s (using module %s)
mt: Interfaċċja %s (tuża modulu %s)

en: Interface %s
mt: Interfaċċja %s

en: No network adapter on your system!
mt: Ebda adattur tan-network fuq is-sistema!

en: Network interface
mt: Interfaċċja tan-network

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
mt: Hemm biss adattur wieħed fuq is-sistema tiegħek:
    
    %s
    
    Se nissettja n-network lokali fuq dak l-adattur.

en: Choose the network interface
mt: Agħżel l-interfaċċja tan-network

en: Please choose what network adapter will be connected to your Local Area Network.
mt: Jekk jogħġbok agħżel liema adattur tan-network se jkun imqabbad man-network lokali (LAN).

en: Network interface already configured
mt: Interfaċċja tan-network diġà kkonfigurata

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
mt: Twissija, l-adattur tan-network (%s) diġà konfigurat.
    
    Trid ri-konfigurazzjoni awtomatika?
    
    Tista' tagħmilha manwalment imma trid tkun taf x'qed tagħmel.

en: Automatic reconfiguration
mt: Ri-konfigurazzjoni awtomatika

en: No (experts only)
mt: Le (esperti biss)

en: Show current interface configuration
mt: Uri l-konfigurazzjoni kurrenti tal-interfaċċja

en: Current interface configuration
mt: Konfigurazzjoni kurrenti tal-interfaċċja

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
mt: Konfigurazzjoni kurrenti ta' "%s":
    
    Network: %s
    Indirizz IP: %s
    Attribuzzjoni IP: %s
    Drajver: %s

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
mt: Nista' nżomm il-konfigurazzjoni kurrenti u nassumi li diġà ssettjajt server DHCP; f'dak il-każ ikkonferma li qrajt l-indirizz tan-network sew; Ma nerġax nikkonfiguraha u ma mmissx il-konfigurazzjoni tas-server DHCP.
    
    Is-seting tad-DNS impliċitu huwa tal-"caching nameserver" fuq il-firewall. Tista' tibdel dan mal-IP tad-DNS tal-ISP tiegħek, per eżempju.
    
    Inkella, nista' nerġa' nikkonfigura l-interfaċċja u nissettjalek server DHCP.

en: Local Network adress
mt: Indirizz tan-network lokali

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you do not know the meaning of an option, simply leave it as it is.
mt: Konfigurazzjoni tas-server DHCP
    
    Hawn tista' tagħżel diversi għażliet għall-konfigurazzjoni tas-server DHCP.
    Jekk ma tafx x'ifissru l-għażliet, sempliċiment ħallihom kif inhuma.

en: (This) DHCP Server IP
mt: IP ta' dan is-server DHCP

en: The DNS Server IP
mt: IP tas-server DHCP

en: The internal domain name
mt: Isem intern tad-dominju

en: The DHCP start range
mt: L-ewwel numru DHCP

en: The DHCP end range
mt: L-aħħar numru DHCP

en: Re-configure interface and DHCP server
mt: Erġa' kkonfigura l-interfaċċja u s-server DHCP

en: The Local Network did not finish with `.0', bailing out.
mt: In-network lokali ma jispiċċax b' ".0", ħiereġ 'il barra.

en: Potential LAN address conflict found in current config of %s!
mt: Possibbilment hemm konflitt fl-indirizz LAN fil-konfigurazzjoni ta' %s!

en: Configuring...
mt: Qed nikkonfigura...

en: Configuring scripts, installing software, starting servers...
mt: Qed nikkonfigura scripts, ninstalla softwer u ntella' servers...

en: Problems installing package %s
mt: Problemi fl-installazzjoni tal-pakkett %s

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and
     a Transparent Proxy Cache server (SQUID).
mt: Kollox ġie konfigurat.
    Issa tista taqsam konnessjonijiet ma' kompjuters oħra fuq in-network lokali, permezz tal-faċilità ta' konfigurazzjoni awtomatika (DHCP) u server tal-proxy trasparenti (SQUID).

en:  drakhelp 0.1
    Copyright (C) 2003-2004 Mandrakesoft.
    This is free software and may be redistributed under the terms of the GNU GPL.
    
    Usage:
mt:  drakhelp 0.1
    Copyright (C) 2003-2004 Mandrakesoft.
    Dan huwa softwer ħieles u jista' jiġi distribwit taħt it-termini tal-GPL GNU.
    
    Użu:

en: Mandrakelinux Help Center
mt: Ċentru ta' l-Għajnuna Mandrakelinux

en: %s cannot be displayed 
    . No Help entry of this type
mt: %s ma jistax jintwera 
    . Ebda element ta' għajnuna ta' dan it-tip

en: System settings
mt: Setings tas-sistema

en: Custom settings
mt: Setings personalizzati

en: Custom & system settings
mt: Setings personalizzati u tas-sistema

en: Editable
mt: Jista' jinbidel

en: Path
mt: Passaġġ

en: User
mt: Utent

en: Group
mt: Grupp

en: Permissions
mt: Permessi

en: Here you can see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
mt: Hawn tista' tara fajls li tuża biex tissettja permessi, sidien u gruppi permezz ta' msec.
    Tista' wkoll iżżid ir-regoli tiegħek li jieħdu preċedenza fuq regoli impliċiti.

en: The current security level is %s.
    Select permissions to see/edit
mt: Il-livell ta' sigurtà attwali huwa %s
    Agħżel permessi li trid tara/tibdel

en: Up
mt: Fuq

en: Move selected rule up one level
mt: Mexxi r-regola pass 'il fuq

en: Down
mt: isfel

en: Move selected rule down one level
mt: Mexxi r-regola pass 'l isfel

en: Add a rule
mt: Żid regola

en: Add a new rule at the end
mt: Żid regola ġdida fit-tarf

en: Delete selected rule
mt: Ħassar ir-regola magħżula

note: -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Edit
mt: Editja

en: Edit current rule
mt: Editja r-regola kurrenti

en: browse
mt: fittex

en: user
mt: utent

en: group
mt: grupp

en: other
mt: oħrajn

en: Read
mt: qari

note: -PO: here %s will be either "user", "group" or "other"
en: Enable "%s" to read the file
mt: Ippermetti lil "%s" jaqra l-fajl

en: Write
mt: Ktib

note: -PO: here %s will be either "user", "group" or "other"
en: Enable "%s" to write the file
mt: Ippermetti lil "%s" jikteb il-fajl

en: Execute
mt: Ħaddem

note: -PO: here %s will be either "user", "group" or "other"
en: Enable "%s" to execute the file
mt: Ippermetti lil "%s" iħaddem il-fajl

en: Used for directory:
     only owner of directory or file in this directory can delete it
mt: Użat għal direttorji:
    is-sid tad-direttorju u l-fajls ta' ġo fih biss jista' jħassru

en: Use owner id for execution
mt: Uża l-id tas-sid għat-tħaddim

en: Use group id for execution
mt: Uża l-id tal-grupp għat-tħaddim

en: Group:
mt: Grupp :

en: Current user
mt: Utent kurrenti

en: When checked, owner and group will not be changed
mt: Meta mmarkat, is-sid u l-grupp ma jinbidlux

en: Path selection
mt: Għażla ta' passaġġ

en: Property
mt: Propjetà

en: PXE Server Configuration
mt: Konfigurazzjoni server PXE

en: Installation Server Configuration
mt: Konfigurazzjoni Server tal-Installazzjoni

en: You are about to configure your computer to install a PXE server as a DHCP server
    and a TFTP server to build an installation server.
    With that feature, other computers on your local network will be installable using this computer as source.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
mt: Se tikkonfigura l-kompjuter biex jinstalla server PXE bħala server DHCP
    u server TFTP biex tibni server ta' l-installazzjoni.
    B'din il-faċilità, kompjuters oħra fuq in-network lokali ikunu jistgħu jiġu nstallati minn fuq dan il-kompjuter.
    
    Ara li għandek l-aċċess għan-network/internet konfigurat qabel tkompli fuq dan il-ass.
    
    Nota: irid ikollok adattur tal-internet dedikat biex tissettja n-network lokali (LAN)

en: Please choose which network interface will be used for the dhcp server.
mt: Jekk jogħġbok agħżel liema kard tan-network trid tuża għas-server DHCP.

en: Interface %s (on network %s)
mt: Interfaċċja %s (fuq network %s)

en: The DHCP server will allow other computer to boot using PXE in the given range of address.
    
    The network address is %s using a netmask of %s.
mt: Is-server DHCP jippermetti kompjuters oħrajn jibbutjaw bil-PXE fil-medda ta' indirizzi mogħtija.
    
    Il-medda ta' indirizzi hija %s u tuża netmask ta' %s.

en: The DHCP start ip
mt: L-ewwel indirizz DHCP

en: The DHCP end ip
mt: L-aħħar indirizz DHCP

en: Please indicate where the installation image will be available.
    
    If you do not have an existing directory, please copy the CD or DVD contents.
mt: Jekk jogħġbok indika fejn se tkun disponibbli l-image ta' installazzjoni.
    
    Jekk m'għandekx direttorju eżistenti, ikkopja l-konenut ta' CD jew DVD.

en: Installation image directory
mt: Direttorju ta' l-image ta' l-installzzjoni

en: No image found
mt: Ebda image ma nstabet

en: No CD or DVD image found, please copy the installation program and rpm files.
mt: Ma nstabet ebda image ta' CD jew DVD, jekk jogħġbok ikkopja l-programm ta' installazzjoni u rpm.

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
mt: Indika fejn qiegħed il-fajl auto_install.cfg.
    
    Ħallih vojt jekk ma tridx tissettja l-installazzjoni awtomatizzata.

en: Location of auto_install.cfg file
mt: Post fejn qiegħed il-fajl auto_install.cfg

en: Status
mt: Stat

en: ALL
mt: KOLLOX

en: LOCAL
mt: LOKALI

en: Ignore
mt: Injora

note: -PO: Do not alter the <span ..> and </span> tags. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
en: Here, you can setup the security level and administrator of your machine.
    
    
    The '<span weight="bold">Security Administrator</span>' is the one who will receive security alerts if the
    '<span weight="bold">Security Alerts</span>' option is set. It can be a username or an email.
    
    
    The '<span weight="bold">Security Level</span>' menu allows you to select one of the six preconfigured security levels
    provided with msec. These levels range from '<span weight="bold">poor</span>' security and ease of use, to
    '<span weight="bold">paranoid</span>' config, suitable for very sensitive server applications:
    
    
    <span foreground="royalblue3">Poor</span>: This is a totally unsafe but very
    easy to use security level. It should only be used for machines not connected to
    any network and that are not accessible to everybody.
    
    
    <span foreground="royalblue3">Standard</span>: This is the standard security
    recommended for a computer that will be used to connect to the Internet as a
    client.
    
    
    <span foreground="royalblue3">High</span>: There are already some
    restrictions, and more automatic checks are run every night.
    
    
    <span foreground="royalblue3">Higher</span>: The security is now high enough
    to use the system as a server which can accept connections from many clients. If
    your machine is only a client on the Internet, you should choose a lower level.
    
    
    <span foreground="royalblue3">Paranoid</span>: This is similar to the previous
    level, but the system is entirely closed and security features are at their
    maximum
mt: Hawn tista' tissettja l-livell ta' sigurtà u l-amministratur tal-kompjuter.
    
    
    L-"<span weight="bold">Amministratur tas-Sistema</span>" huwa dak li jirċievi l-allerti tas-sigurtà jekk l-għażla 
    '<span weight="bold">Allerti tas-Sigurtà</span>' hija mixgħula. Dan l-element jista' jkun isem ta' utent jew imejl.
    
    
    Il-menu "<span weight="bold">Livell ta' Sigurtà</span>" iħallik tagħżel wieħed minn sitt livelli ta' sigurtà pridefiniti ipprovduti minn msec.Dawn il-livelli jibdew minn "<span weight="bold">ftit li xejn</span>" sigurtà u faċli ħafna tużah, sa
    "<span weight="bold">paranojku</span>" li jgħodd għal servers sensittivi:
    
    
    <span foreground="royalblue3">Ftit li xejn</span>: Din l-għażla totalment mhix sigura 
    imma faċli ħafna tużaha. Għandha tintuża biss għal kompjuters li mhux imqabbdin ma' ebda
    network u mhux aċċessibbli minn kulħadd.
    
    
    <span foreground="royalblue3">Standard</span>: Dan huwa l-livell ta' sigurtà standard
    rakkomandat għal kompjuter li jaqbad ma' l-internet bħala klijent.
    
    
    <span foreground="royalblue3">Tajjeb</span>: Diġà hemm xi restrizzjonijiet, u hemm iżjed
    iċċekkjar awtomatiċi li jsiru bil-lejl.
    
    
    <span foreground="royalblue3">Tajjeb ħafna</span>: Is-sigurtà issa hija għolja biżżejjed biex
    jintuża bħala server li jaċċetta konnessjonijiet minn ħafna klijenti. Jekk il-kompjuter tużah
    biss bħal klijent fuq l-internet, għandek tagħżel livell iżjed baxx.
    
    
    <span foreground="royalblue3">Paranojku</span>: Dan huwa simili għal-livell ta' qabel, imma
    s-sistema issa hija magħluqa għal kollox u l-karatteristiċi tas-sigurtà huma fl-ogħla livell.

en: Description of the fields:
mt: Deskrizzjoni tal-elementi:

en: (default value: %s)
mt: (valur impliċitu: %s)

en: Security Level:
mt: Livell ta' sigurtà:

en: Security Administrator:
mt: Amministratur tas-sigurtà:

en: Basic options
mt: Għażliet bażiċi

en: Network Options
mt: Għażliet tan-network

en: System Options
mt: Għażliet tas-sistema

en: Periodic Checks
mt: Ċekkjar perjodiku

en: Please wait, setting security level...
mt: Stenna ftit.. qed jissettja l-livell ta' sigurtà...

en: Please wait, setting security options...
mt: Stenna ftit.. qed jissettja l-għażliet ta' sigurtà...

en: No Sound Card detected!
mt: Ebda kard tal-awdjo ma nstabet!

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
mt: Ebda kard tal-awdjo ma nstabet fuq il-kompjuter. Jekk jogħġbok iċċekkja li hemm kard li tieħu l-Linux imqabbda sew.
    
    
    Tista' żżur id-database ta' apparat magħruf fuq:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program.  Just type "alsaconf" or "sndconfig" in a console.
mt: 
    
    
    Nota: Jekk għandek kard tal-awdjo ISA PnP, trid tuża l-programm alsaconf jew sndconfig. Sempliċiment ittajpja "alsaconf" jew "sndconfig" fil-konsol.

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
mt: pakkett ImageMagick huwa meħtieġ biex taħdem tajjeb. Klikkja 
    "Ok" biex tinstalla "IMageMagick" jew "Ikkanċella" biex toħroġ.

en: first step creation
mt: l-ewwel pass - ħolqien

en: final resolution
mt: reżoluzzjoni finali

en: choose image file
mt: agħżel fajl bl-istampa

en: Theme name
mt: Isem tat-tema

en: Browse
mt: Fittex

en: Configure bootsplash picture
mt: Ikkonfigura stampa tal-boot

en: x coordinate of text box
    in number of characters
mt: pożizzjoni x tal-kaxxa
    tat-test bħala karattri

en: y coordinate of text box
    in number of characters
mt: pożizzjoni y tal-kaxxa
    tat-test bħala karattri

en: text width
mt: wisa' tat-test

en: text box height
mt: għoli tal-kaxxa tat-test

en: the progress bar x coordinate
    of its upper left corner
mt: koordinat x tal-kaxxa
    tal-progress, rokna tax-xellug fuq

en: the progress bar y coordinate
    of its upper left corner
mt: koordinat y tal-kaxxa
    tal-progress, rokna tax-xellug fuq

en: the width of the progress bar
mt: wisa' tal-kaxxa tal-progress

en: the height of the progress bar
mt: għoli tal-kaxxa tal-progress

en: the color of the progress bar
mt: kulur tal-kaxxa tal-progress

en: Preview
mt: previżjoni

en: Save theme
mt: ikteb tema

en: Choose color
mt: agħżel kulur

en: Display logo on Console
mt: Uri logo fil-konsol

en: Make kernel message quiet by default
mt: Aħmel il-messaġġi tal-kernel siekta impliċitament

en: Notice
mt: Avviż

en: This theme does not yet have a bootsplash in %s!
mt: Din it-tema m'għandhiex bootsplash f' %s.

en: choose image
mt: agħżel istampa

en: saving Bootsplash theme...
mt: qed tinkiteb tema bootsplash...

en: ProgressBar color selection
mt: Għażla kulur tal-kaxxa tal-progress

en: You must choose an image file first!
mt: L-ewwel trid tagħżel fajl tal-istampa

en: Generating preview...
mt: Qed tiġi ġenerata previżjoni...

note: -PO:  First %s is theme name, second %s (in parenthesis) is resolution
en: %s BootSplash (%s) preview
mt: Stampa tal-boot %s - previżjoni (%s)

note: -PO: Do not alter the <span ..> and </span> tags
en: The image "%s" cannot be load due to the following issue:
    
    <span foreground="Red">%s</span>
mt: L_image "%s" ma jistax jittella' minħabba din il-problema:
    
    <span foreground="Red">%s</span>

en: Connected through a serial port or an usb cable
mt: Konnessjoni minn port serjali jew wajer USB

en: Add an UPS device
mt: Żid tagħmir UPS

en: Welcome to the UPS configuration utility.
    
    Here, you'll add a new UPS to your system.
mt: Merħba għall-għodda tal-konfigurazzjoni tal-UPS.
    
    Hawn, tista' żżid UPS mas-sistema.

en: We're going to add an UPS device.
    
    Do you want to autodetect UPS devices connected to this machine or to manually select them?
mt: Se nżidu tagħmir UPS.
    
    Trid tagħraf awtomatikament tagħmir UPS imqabbad mal-kompjuter jew tagħżlu manwalment?

en: Autodetection
mt: Għarfien awtomatiku

en: Detection in progress
mt: Għaddej l-għarfien

en: Congratulations
mt: Prosit

en: The wizard successfully added the following UPS devices:
mt: Is-saħħar issettja dan it-tagħmir UPS:

en: No new UPS devices was found
mt: Ma nstab ebda tagħmir UPS

en: UPS driver configuration
mt: Konfigurazzjoni drajver UPS

en: Please select your UPS model.
mt: Jekk jogħġbok agħżel mudell ta' UPS

en: Manufacturer / Model:
mt: Ditta / mudell:

en: We are configuring the "%s" UPS from "%s".
    Please fill in its name, its driver and its port.
mt: Qed nikkonfiguraw l-UPS "%s" mingħand "%s".
    Jekk jogħġbok agħti isem, drajver u port.

en: Name:
mt: Isem:

en: The name of your ups
mt: Isem il-UPS

en: The driver that manages your ups
mt: Id-drajver li jimmaniġġja l-UPS

en: The port on which is connected your ups
mt: Il-port li miegħu hemm imqabbad il-UPS

en: The wizard successfully configured the new "%s" UPS device.
mt: Is-saħħar ikkonfiguralek it-tagħmir UPS "%s".

en: UPS devices
mt: Tagħmir UPS

en: Name
mt: Isem

en: UPS users
mt: Utenti UPS

en: Access Control Lists
mt: Listi ta' Kontroll ta' l-Aċċess

en: IP mask
mt: Maskra IP

en: Rules
mt: Regoli

en: Action
mt: Azzjonijiet

en: Level
mt: Livell

en: ACL name
mt: Isem ACL

en: Welcome to the UPS configuration tools
mt: Merħba għall-għodda ta' konfigurazzjoni UPS

en: The VPN connection is enabled.
mt: Il-konnessjoni VPN mixgħula.

en: The setup of a VPN connection has already been done.
    
    It's currently enabled.
    
    What would you like to do?
mt: Il-konfigurazzjoni tal-konnessjoni VPN diġà saret.
    
    Bħalissa hija mixgħula.
    
    X'tixtieq tagħmel?

en: Disabling VPN...
mt: Qed nitfi VPN...

en: The VPN connection is now disabled.
mt: Il-konnessjoni VPN issa mitfija

en: VPN connection currently disabled
mt: Konnessjoni VPN bħalissa mitfija

en: The setup of a VPN connection has already been done.
    
    It's currently disabled.
    
    What would you like to do?
mt: Il-konfigurazzjoni tal-konnessjoni VPN diġà saret.
    
    Bħalissa hija mitfija.
    
    X'tixtieq tagħmel?

en: Enabling VPN...
mt: Qed nixgħel VPN...

en: The VPN connection is now enabled.
mt: Il-konnessjoni VPN issa mixgħula

en: Simple VPN setup.
mt: Konfigurazzjoni sempliċi VPN

en: You are about to configure your computer to use a VPN connection.
    
    With this feature, computers on your local private network and computers
    on some other remote private networks, can share resources, through
    their respective firewalls, over the Internet, in a secure manner. 
    
    The communication over the Internet is encrypted. The local and remote
    computers look as if they were on the same network.
    
    Make sure you have configured your Network/Internet access using
    drakconnect before going any further.
mt: Int se tikkonfigura l-kompjuter biex juża konnessjoni VPN.
    
    B'din il-faċilità, kompjuters fuq in-network privat lokali u kompjuters
    fuq xi networks privati remoti oħrajn jistgħu jaqsmu riżorsi, minn ġo l-
    firewalls rispettivi tagħhom, fuq l-internet, b'mod sikur.
    
    Il-kommunikazzjoni fuq l-Internet hija ċċifrata. Il-kompjuters lokali
    u remoti jidhru qishom fuq l-istess network.
    
    Aċċerta li għandek in-network/internet konfigurati permezz ta' drakconnect
    qabel tkompli.

en: VPN connection.
    
    This program is based on the following projects:
     - FreeSwan: 			http://www.freeswan.org/
     - Super-FreeSwan: 		http://www.freeswan.ca/
     - ipsec-tools: 			http://ipsec-tools.sourceforge.net/
     - ipsec-howto: 		http://www.ipsec-howto.org
     - the docs and man pages coming with the %s package
    
    Please read AT LEAST the ipsec-howto docs
    before going any further.
mt: Konnessjoni VPN.
    
    Dan il-programm ibbażat fuq dawn il-prodotti:
     - FreeSwan: 			http://www.freeswan.org/
     - Super-FreeSwan: 		http://www.freeswan.ca/
     - ipsec-tools: 			http://ipsec-tools.sourceforge.net/
     - ipsec-howto: 		http://www.ipsec-howto.org
     - id-dokumenti u paġni man li jiġu mal-pakkett %s
    
    Jekk jogħġbok aqra TA' L-INQAS id-dokumenti ipsec-howto
    qabel tkompli.

en: Kernel module.
mt: Modulu tal-kernel

en: The kernel needs to have ipsec support.
    
    You're running a %s kernel version.
    
    This kernel has '%s' support.
mt: Il-kernel għandu bżonn sappotr għal ipsec.
    
    Int qed tħaddem kernel verżjoni %s.
    
    Dan il-kernel għandu sapport għal "%s".

en: Security Policies
mt: Polzi ta' Sigurtà

en: IKE daemon racoon
mt: daemon IKE racoon

en: Configuration file
mt: Fajl ta' konfigurazzjoni

en: Configuration step!
    
    You need to define the Security Policies and then to 
    configure the automatic key exchange (IKE) daemon. 
    The KAME IKE daemon we're using is called 'racoon'.
    
    What would you like to configure?
mt: Pass ta' konfigurazzjoni
    
    Trid tiddefinixxi l-polzi ta' sigurtà u mbgħad
    tikkonfigura d-daemon ta' qsim ta' ċifrarji awtomatiku
    (IKE). Id-daemon KAME IDE li nużaw jismu "racoon".
    
    X'tixtieq tikkonfigura?

en: Next, we will configure the %s file.
    
    
    Simply click on Next.
mt: Issa se nikkonfiguraw il-fajl %s.
    
    
    Sempliċiment klikkja fuq "Li Jmiss".

en: %s entries
mt: %s elementi

en: The %s file contents
    is divided into sections.
    
    You can now:
    
      - display, add, edit, or remove sections, then
      - commit the changes
    
    What would you like to do?
mt: Il-kontenut tal-fajl %s
    maqsum f'sezzjonijiet.
    
    Issa tista':
    
      - tara, iżżid, tibdel jew tneħħi sezzjonijiet, imbgħad
      - tikkommetti l-bidliet
    
    X'tixtieq tagħmel?

en: _:display here is a verb
    Display
mt: Uri

en: Commit
mt: Ikkommetti

en: _:display here is a verb
    Display configuration
mt: Uri konfigurazzjoni

en: The %s file does not exist.
    
    This must be a new configuration.
    
    You'll have to go back and choose 'add'.
mt: Il-fajl %s ma jeżistix.
    
    Din aktarx konfigurazzjoni ġdida.
    
    Trid tmur lura u tagħżel "Żid".

en: ipsec.conf entries
mt: elementi ipsec.conf

en: The %s file contains different sections.
    
    Here is its skeleton:	'config setup' 
    					'conn default' 
    					'normal1'
    					'normal2' 
    
    You can now add one of these sections.
    
    Choose the section you would like to add.
mt: Il-faj %s fih sezzjonijiet differenti.
    
    Hawn l-iskeletru tiegħu:	'config setup' 
    					'conn default' 
    					'normal1'
    					'normal2' 
    
    Issa tista' żżid waħda minn dawn is-sezzjonijiet.
    
    Agħżel liema sezzjoni trid iżżid.

en: Exists!
mt: Jeżisti!

en: A section with this name already exists.
    The section names have to be unique.
    
    You'll have to go back and add another section
    or change its name.
mt: Diġà teżisti sezzjoni b'dan l-isem.
    L-ismijiet tas-sezzjonijiet iridu jkunu uniċi.
    
    Trid tmur lura u żżid sezzjoni oħra jew 
    tibdel l-isem.

en: This section has to be on top of your
    %s file.
    
    Make sure all other sections follow this config
    setup section.
    
    Choose continue or previous when you are done.
mt: Din is-sezzjoni trid tkun fuq nett tal-
    fajl %s.
    
    Aċċerta li s-sezzjonijiet l-oħra kollha jiġu
    wara din is-sezzjoni config setup.
    
    Agħżek "Kompli" jew "Lura" meta tkun lest.

en: interfaces
mt: interfaċċji

en: This is the first section after the config
    setup one.
    
    Here you define the default settings. 
    All the other sections will follow this one.
    The left settings are optional. If do not define
    them here, globally, you can define them in each
    section.
mt: Din hija l-ewwel sezzjoni wara dik ta' config setup.
    
    Hawn tista' tiddefinixxi s-setings impliċiti.
    Is-sezzjonijiet l-oħra kollha jiġu wara din.
    Is-setings tax-xellug huma opzjonali. Jekk ma 
    tagħtihomx valur globali hawn, tista' tiddefinixxihom 
    f'kull sezzjoni.

en: Your %s file has several sections, or connections.
    
    You can now add a new section.
    Choose continue when you are done to write the data.
mt: Il-fajl %s għandu diversi sezzjonijiet jew konnessjonijiet.
    
    Int issa tista' żżid sezzjoni ġdida.
    Agħżel "kompli" meta tkun lest biex tikteb l-informazzjoni.

en: section name
mt: isem is-sezzjoni

en: A section with this name already exists.
    The section names have to be unique.
    
    You'll have to go back and add another section
    or change the name of the section.
mt: Diġà teżisti sezzjoni b'dan l-isem.
    L-ismijiet tas-sezzjonijiet iridu jkunu uniċi.
    
    Trid tmur lura u żżid sezzjoni oħra jew 
    tibdel l-isem tas-sezzjoni.

en: Add a Security Policy.
    
    You can now add a Security Policy.
    
    Choose continue when you are done to write the data.
mt: Żid polza ta' sigurtà
    
    Int issa tista' żżid polza ta' sigurtà.
    
    Agħżel "Kompli" meta tkun lest biex tikteb l-informazzjoni.

en: Edit section
mt: Ibdel sezzjoni

en: Your %s file has several sections or connections.
    
    You can choose here below the one you want to edit 
    and then click on next.
mt: Il-fajl %s fih ħafna sezzjonijiet jew konnessjonijiet.
    
    Tista' tagħżel dak li trid hawn taħt, imbgħad agħfas 
    "Li Jmiss"

en: Section names
mt: Ismijiet tas-sezzjonijiet

en: Can not edit!
mt: Ma tistax tibdel!

en: You cannot edit this section.
    
    This section is mandatory for Freeswan 2.X.
    One has to specify version 2.0 on the top
    of the %s file, and eventually, disable or
    enable the opportunistic encryption.
mt: Ma tistax tibdel din is-sezzjoni.
    
    Din is-sezzjoni hija meħtieġa għal Freeswan 2.X
    Wieħed irid jispeċifika verżjoni 2.0 fuq nett tal-
    fajl %s, u eventwalment titfi jew tixgħel iċ-
    ċifrazzjoni opportunistika.

en: Your %s file has several sections.
    
    You can now edit the config setup section entries.
    Choose continue when you are done to write the data.
mt: Il-fajl %s fih ħafna sezzjonijiet.
    
    Int issa tista' tibdel is-sezzjonijiet "config setup"
    Agħżel "Kompli" meta tkun lest biex tikteb l-informazzjoni.

en: Your %s file has several sections or connections.
    
    You can now edit the default section entries.
    Choose continue when you are done to write the data.
mt: Il-fajl %s fih ħafna sezzjonijiet jew konnessjonijiet.
    
    Int issa tista' tibdel is-sezzjonijiet "default"
    Agħżel "Kompli" meta tkun lest biex tikteb l-informazzjoni.

en: Your %s file has several sections or connections.
    
    You can now edit the normal section entries.
    
    Choose continue when you are done to write the data.
mt: Il-fajl %s fih ħafna sezzjonijiet jew konnessjonijiet.
    
    Int issa tista' tibdel is-sezzjonijiet normali
    
    Agħżel "Kompli" meta tkun lest biex tikteb l-informazzjoni.

en: Edit a Security Policy.
    
    You can now edit a Security Policy.
    
    Choose continue when you are done to write the data.
mt: Ibdel Polza ta' Sigurtà.
    
    Int issa tista' tibdel il-polża ta' sigurtà
    
    Agħżel "Kompli" meta tkun lest biex tikteb l-informazzjoni.

en: Remove section
mt: Neħħi sezzjoni

en: Your %s file has several sections or connections.
    
    You can choose here below the one you want to remove
    and then click on next.
mt: Il-fajl %s fih ħafna sezzjonijiet jew konnessjonijiet.
    
    Tista' tagħżel dak li trid tneħħi hawn taħt, imbgħad agħfas
    "Li jmiss"

en: The racoon.conf file configuration.
    
    The contents of this file is divided into sections.
    You can now:
      - display 		 (display the file contents)
      - add			 (add one section)
      - edit 			 (modify parameters of an existing section)
      - remove 		 (remove an existing section)
      - commit 		 (writes the changes to the real file)
mt: Il-konfigurazzjoni tal-fajl racoon.conf.
    Il-kontenut ta' dan il-fajl maqsum f'sezzjonijiet.
    Issa tista' tagħmel dawn:
      - uri 		 (uri l-kontenut tal-fajl)
      - żid			 (żid sezzjoni waħda)
      - ibdel 			 (ibdel il-parametri ta' sezzjoni eżistenti)
      - neħħi 		 (neħħi sezzjoni eżistenti)
      - ikkommetti 		 (ikteb il-bidliet fil-fajl attwali)

en: The %s file does not exist
    
    This must be a new configuration.
    
    You'll have to go back and choose configure.
mt: Il-fajl %s ma jeżistix
    
    Din aktarx konfigurazzjoni ġdida.
    
    Trid tmur lura u tagħżel ikkonfigura

en: racoonf.conf entries
mt: elementi racoonf.conf

en: The 'add' sections step.
    
    Here below is the racoon.conf file skeleton:
    	'path'
    	'remote'
    	'sainfo' 
    
    Choose the section you would like to add.
mt: Il-pass "żid".
    
    Hawn issib skeletru ta' fajl racoon.conf:
    	'path'
    	'remote'
    	'sainfo' 
    
    Agħżel sezzjoni li trid iżżid.

en: remote
mt: remot

en: The 'add path' section step.
    
    The path sections have to be on top of your racoon.conf file.
    
    Put your mouse over the certificate entry to obtain online help.
mt: Il-pass tas-sezzjoni "add path"
    
    Is-sezzjonijiet tal-passaġġ iridu jkunu fuq nett tal-fajl racoon.conf.
    
    Mexxi l-maws għal fuq l-element taċ-ċertifikat biex tikseb għajnuna online.

en: path type
mt: tip ta' passaġġ

en: real file
mt: fajl veru

en: Make sure you already have the path sections
    on the top of your racoon.conf file.
    
    You can now choose the remote settings.
    Choose continue or previous when you are done.
mt: Aċċerta li diġà għandek is-sezzjonijiet tal-passaġġ
    fuq nett tal-fajl racoon.conf.
    
    Issa tista' tagħżel is-setings remoti.
    Agħżel Kompli jew Lura meta tlesti.

en: Make sure you already have the path sections
    on the top of your %s file.
    
    You can now choose the sainfo settings.
    Choose continue or previous when you are done.
mt: Aċċerta li diġà għandek is-sezzjonijiet tal-passaġġ
    fuq nett tal-fajl %s.
    
    Issa tista' tagħżel is-setings sainfo.
    Agħżel Kompli jew Lura meta tlesti.

en: Your %s file has several sections or connections.
    
    You can choose here in the list below the one you want
    to edit and then click on next.
mt: Il-fajl %s għandu diversi sezzjonijiet jew konnessjonijiet.
    
    Tista' tagħżel fil-lista ta' taħt liema trid tibdel, u 
    tikklikkja "Li Jmiss"

en: Your %s file has several sections.
    
    
    You can now edit the remote section entries.
    
    Choose continue when you are done to write the data.
mt: Il-fajl %s għandu diversi sezzjonijiet.
    
    
    Issa tista' tissettja l-elementi tas-sezzjoni "remote"
    
    Agħżel Kompli meta tlesti biex tikteb l-informazzjoni.

en: Your %s file has several sections.
    
    You can now edit the sainfo section entries.
    
    Choose continue when you are done to write the data.
mt: Il-fajl %s għandu diversi sezzjonijiet.
    
    Issa tista' tissettja l-elementi tas-sezzjoni "sainfo"
    
    Agħżel Kompli meta tlesti biex tikteb l-informazzjoni.

en: This section has to be on top of your
    %s file.
    
    Make sure all other sections follow these path
    sections.
    
    You can now edit the path entries.
    
    Choose continue or previous when you are done.
mt: Din is-sezzjoni trid tkun fuq nett tal-fajl 
    %s.
    
    Aċċerta li s-sezzjonijiet l-oħra kollha jiġu wara
    dawn is-sezzjonijiet tal-passaġġi.
    
    Issa tista' tibdel l-elementi tal-passaġġi
    
    Agħżel Kompli jew Lura meta tlesti.

en: Everything has been configured.
    
    You may now share resources through the Internet,
    in a secure way, using a VPN connection.
    
    You should make sure that that the tunnels shorewall
    section is configured.
mt: Kollox ġie konfigurat.
    
    Issa tista' taqsam riżorsi b'mod sikur, b'konnessjoni VPN
    għaddejja mill-internet.
    
    Għandek tiżgura li s-sezzjoni ta' shorewall "tunnels" hija
    konfigurata.

en: Sainfo source address
mt: Indirizz sors sainfo

en: Sainfo source protocol
mt: Protokoll sors sainfo

en: Sainfo destination address
mt: Indirizz destinatarju sainfo

en: Sainfo destination protocol
mt: Protokoll destinatarju sainfo

en: PFS group
mt: Grupp PFS

en: Encryption algorithm
mt: Algoritmu ta' ċifrazzjoni

en: Authentication algorithm
mt: Algoritmu ta' awtentikazzjoni

en: Compression algorithm
mt: Algoritmu ta' kompressjoni

en: Remote
mt: Remot

en: Generate policy
mt: Iġġenera polza

en: off
mt: mitfi

en: on
mt: mixgħul

en: Passive
mt: Passiv

en: Certificate type
mt: Tip ta' ċertifikat

en: My certfile
mt: Ċertifikat tiegħi

en: Name of the certificate
mt: Isem iċ-ċertifikat

en: My private key
mt: Ċifrarju privat tiegħi

en: Name of the private key
mt: Isem iċ-ċifrarju privat

en: Verify cert
mt: Ivverifika ċert.

en: My identifier
mt: Identifikatur tiegħi

en: Proposal
mt: Proposta

en: Hash algorithm
mt: Algoritmu ta' hash

en: DH group
mt: Grupp DH

en: Command
mt: Kmand

en: Source IP range
mt: Medda IP sors

en: Destination IP range
mt: Medda IP destinazzjoni

en: Upper-layer protocol
mt: Protokoll livell ta' fuq

en: any
mt: kwalinkwa

en: Flag
mt: Bandiera

en: Direction
mt: Direzzjoni

en: IPsec policy
mt: Polza IPsec

en: discard
mt: armi

en: Mode
mt: Modalità

en: transport
mt: trasport

en: Source/destination
mt: Sors/destinazzjoni

en: require
mt: irrikjedi

en: default
mt: impliċitu

en: use
mt: uża

en: unique
mt: uniku

en: USA (broadcast)
mt: Stati Uniti (xandir)

en: USA (cable)
mt: Stati Uniti (cable)

en: USA (cable-hrc)
mt: Stati Uniti (cable-hrc)

en: Canada (cable)
mt: Kanada (cable)

en: Japan (broadcast)
mt: Ġappun (xandir)

en: Japan (cable)
mt: Ġappun (cable)

en: China (broadcast)
mt: Ċina (xandir)

en: West Europe
mt: Ewropa tal-Punent

en: East Europe
mt: Ewropa tal-Lvant

en: France [SECAM]
mt: Franza [SECAM]

en: Newzealand
mt: New Zealand

en: Australian Optus cable TV
mt: Optus cable TV Awstraljan

en: Please,
    type in your tv norm and country
mt: Jekk jogħġbok,
    daħħal l-istandard televiżiv u l-pajjiż

en: TV norm:
mt: Standard televiżiv :

en: Area:
mt: Reġjun :

en: Scanning for TV channels in progress...
mt: Tfittix għal stazzjonijiet tat-TV għaddej

en: Scanning for TV channels
mt: Qed infittex stazzjonijiet tat-TV

en: There was an error while scanning for TV channels
mt: Kien hemm problema waqt it-tfittix għal kanali televiżivi

en: Have a nice day!
mt: Il-ġurnata t-tajba!

en: Now, you can run xawtv (under X Window!) !
mt: Issa tista' tħaddem xawtv (taħt l-XWindows)!

en: No TV Card detected!
mt: Ebda kard TV ma nstabet!

note: -PO: keep the double empty lines between sections, this is formatted a la LaTeX
en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
mt: Ebda kard TV ma nstabet fuq il-kompjuter. Jekk jogħġbok iċċekkja li hemm kard li tieħu l-Linux imqabbda sew.
    
    
    Tista' żżur id-database ta' apparat magħruf fuq:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: Alternative drivers
mt: Drajvers alternattivi

en: the list of alternative drivers for this sound card
mt: lista ta' drajvers alternattivi għal din il-kard tal-awdjo

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
mt: Dan huwa l-"bus" fiżiku fejn huwa mqabbad l-apparat (eż, PCI, USB eċċ)

en: Bus identification
mt: Identifikazzjoni tal-bus

en: - PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids
mt: - tagħmir PCI u USB : dan juri l-ids PCI/USB tal-manufattur, apparat, sotto-manufattur u sotto-apparat.

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
mt: - tagħmir pci: dan jagħti s-slot PCI, apparat u funzjoni tal-kard.
    - tagħmir eide: l-apparat huwa "master" jew "slave"
    - tagħmir scsi: l-ids tal-bus u apparat scsi.

en: Drive capacity
mt: Kemm tesa' d-drajv

en: special capacities of the driver (burning ability and or DVD support)
mt: kapaċitajiet speċjali tad-drajver (ħruq ta' CDs jew sapport għal DVDs)

en: this field describes the device
mt: dan l-element jiddeskrivi l-apparat

en: Old device file
mt: Fajl antik ta' apparat

en: old static device name used in dev package
mt: Isem ta' apparat antik użat fil-pakkett dev

en: New devfs device
mt: Apparat ġdid devfs

en: new dynamic device name generated by core kernel devfs
mt: Isem dinamiku ta' apparat, iġġenerat mid-devfs tal-kernel

note: -PO: here "module" is the "jargon term" for a kernel driver
en: Module
mt: Modulu

en: the module of the GNU/Linux kernel that handles the device
mt: il-modulu tal-kernel GNU/Linux li jieħu ħsieb dan l-apparat

en: Extended partitions
mt: Partizzjonijiet estiżi

en: the number of extended partitions
mt: Numru ta' partizzjonijiet estiżi

en: Geometry
mt: Ġeometrija

en: Cylinder/head/sectors geometry of the disk
mt: Ġeometrija ta' ċilindri/rjus/setturi tad-diska

en: Disk controller
mt: Kontrollaturi tad-diska

en: the disk controller on the host side
mt: il-kontrollatur tad-diska min-naħa tal-kompjuter

en: class of hardware device
mt: klassi ta' apparat ħardwer

en: Model
mt: Mudell

en: hard disk model
mt: mudell tal-ħard disk

en: network printer port
mt: port tal- printer tan-network

en: Primary partitions
mt: Partizzjonijiet primarji

en: the number of the primary partitions
mt: Numru ta' partizzjonijiet primarji

en: the vendor name of the device
mt: isem il-manufattur tal-apparat

en: the PCI bus on which the device is plugged
mt: Dan huwa l-"bus" PCI fejn huwa mqabbad l-apparat

en: PCI device #
mt: apparat PCI #

en: PCI device number
mt: numru tal-apparat PCI

en: PCI function #
mt: funzjoni PCI #

en: PCI function number
mt: Numru tal-funzjoni PCI

en: Vendor ID
mt: ID tal-Manufattur

en: this is the standard numerical identifier of the vendor
mt: Dan huwa l-identifikatur numeriku standard tal-manufattur

en: Device ID
mt: ID ta' l-apparat

en: this is the numerical identifier of the device
mt: Dan huwa l-identifikatur numeriku tal-apparat

en: Sub vendor ID
mt: ID sotto-manufattur

en: this is the minor numerical identifier of the vendor
mt: Dan huwa numru minuri li jidentifika l-manufattur

en: Sub device ID
mt: ID sotto-apparat

en: this is the minor numerical identifier of the device
mt: Dan huwa numru minuri li jidentifika l-apparat

en: Device USB ID
mt: ID ta' apparat USB

en: the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to "benchmark" the cpu.
mt: Il-kernel GNU/Linux għandu bżonn iħaddem kalkulazzjoni fil-bidu sabiex jinizjalizza "timer". Ir-riżultat jinżamm bħala "bogomips" bħala mezz biex jinżamm "benchmark" tas-CPU.

en: Cache size
mt: Daqs tal-cache

en: size of the (second level) cpu cache
mt: daqs tal-cache tas-CPU (tieni livell)

note: -PO: here "comas" is the medical coma, not the lexical coma!!
en: Coma bug
mt: Bug "koma"

en: whether this cpu has the Cyrix 6x86 Coma bug
mt: jekk dan is-CPU għandux il-bug "Cyrix 6x86 Coma"

en: Cpuid family
mt: Familja ta' CPUid

en: family of the cpu (eg: 6 for i686 class)
mt: familja tas-CPU (eż: 6 għal klassi i686)

en: Cpuid level
mt: Livell Cpuid

en: information level that can be obtained through the cpuid instruction
mt: livell ta' informazzjoni li jista' jinkiseb permezz tal-istruzzjoni cpuid

en: Frequency (MHz)
mt: Frekwenza (MHz)

en: the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
mt: Il-frekwenza tas-CPU f'Mhz (Megahertz li huwa assoċjat bejn wieħed u ieħor man-numru ta' struzzjonijiet li s-CPU kapaċi jagħmel f'sekonda)

en: Flags
mt: Indikaturi

en: CPU flags reported by the kernel
mt: Indikaturi tas-CPU rapportati mill-kernel

en: Fdiv bug
mt: Bug "fdiv"

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
mt: Proċessaturi bikrin Intel Pentium għandhom problema fil-proċessatur "floating point" li ma jilħaqx il-preċiżjoni meħtieġa meta jagħmlu FDIV (Floating Point Division)

en: Is FPU present
mt: FPU preżenti

en: yes means the processor has an arithmetic coprocessor
mt: iva jfisser li l-proċessatur għandu koproċessatur aritmetiku

en: Whether the FPU has an irq vector
mt: Jekk l-FPU għandux vettur irq

en: yes means the arithmetic coprocessor has an exception vector attached
mt: "iva" jfisser li l-koproċessatur aritmentiku għandu vettur ta' eċċezzjonijiet mehmuż

en: F00f bug
mt: Bug F00F

en: early pentiums were buggy and freezed when decoding the F00F bytecode
mt: pentiums antiki kellhom żball u kienu jieqfu meta jsibu l-kodiċi F00F

en: Halt bug
mt: Bug "halt"

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
mt: Xi proċessaturi bikrin i486DX-100 ma setgħux jerġgħu lura f'modalità operattiva wara l-istruzzjoni "halt".

en: sub generation of the cpu
mt: sotto-ġenerazzjoni tas-CPU

en: generation of the cpu (eg: 8 for Pentium III, ...)
mt: ġenerazzjoni tas-CPU (eż, 8 għal Pentium III)

en: Model name
mt: Isem il-mudell

en: official vendor name of the cpu
mt: isem uffiċjali tal-manufattur għas-CPU

en: the name of the CPU
mt: isem is-CPU

en: Processor ID
mt: ID tal-proċessatur

en: the number of the processor
mt: in-numru tal-proċessatur

en: the vendor name of the processor
mt: isem il-venditur tal-proċessatur

en: Write protection
mt: Protezzjoni kontra kitba

en: Floppy format
mt: Format tal-flopi

en: format of floppies supported by the drive
mt: Format tal-floppies magħrufa mid-drajv

en: Channel
mt: Kanal

en: EIDE/SCSI channel
mt: Kanal EIDE/SCSI

en: Disk identifier
mt: Identifikatur tad-diska

en: usually the disk serial number
mt: Normalment in-numru tas-serje tad-diska

en: Logical unit number
mt: Numru tal-unità loġiku

en: Speed
mt: Veloċità

en: Device file
mt: Fajl ta' l-apparat

en: the device file used to communicate with the kernel driver for the mouse
mt: Il-fajl ta' l-apparat li jintuża biex tikkomunika mad-drajver tal-kernel għall-maws

en: Emulated wheel
mt: Rota emulata

en: whether the wheel is emulated or not
mt: Jekk ir-rota hix emulata jew le

en: the type of the mouse
mt: tip ta' maws

en: the name of the mouse
mt: isem il-maws

en: Number of buttons
mt: Numru ta' buttuni

en: the number of buttons the mouse has
mt: numru ta' buttuni li għandu l-maws

en: the type of bus on which the mouse is connected
mt: tip ta' bus li miegħu imqabbad il-maws

en: Mouse protocol used by X11
mt: Protokoll tal-maws użat minn X11

en: the protocol that the graphical desktop use with the mouse
mt: il-protokoll li juża d-desktop grafiku għall-maws

en: Identification
mt: Identifikazzjoni

en: Connection
mt: Konnessjoni

en: Partitions
mt: Partizzjonijiet

en: Features
mt: Karatteristiċi

note: -PO: please keep all "/" characters !!!
en: /_Options
mt: /Għa_żliet

en: /_Help
mt: /_Għajnuna

en: /Autodetect _printers
mt: /Agħraf _printers awtomatikament

en: /Autodetect _modems
mt: /Agħraf _modems awtomatikament

en: /Autodetect _jaz drives
mt: /Agħraf drajv _jaz awtomatikament

en: /_Quit
mt: /_Oħroġ

en: /_Fields description
mt: /Deskrizzjoni _elementi

en: Harddrake help
mt: Għajnuna ta' Harddrake

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
mt: Ladarba tagħżel apparat, tista' tara l-informazzjoni dwaru fl-elementi tal-gwarniċ tal-lemin ("Informazzjoni")

en: /_Report Bug
mt: /I_rrapporta bug

en: /_About...
mt: /_Dwar...

en: About Harddrake
mt: Dwar Harddrake

en: Detected hardware
mt: Ħardwer misjub

en: Configure module
mt: Ikkonfigura modulu

en: Run config tool
mt: Ħaddem għodda ta' konfigurazzjoni

en: unknown
mt: mhux magħruf

en: Unknown
mt: Mhux magħruf

en: Misc
mt: Mixx.

en: Click on a device in the left tree in order to display its information here.
mt: Agħżel apparat mil-lista tax-xellug biex turi informazzjoni hawn.

en: secondary
mt: sekondarju

en: primary
mt: ewlieni

en: Account:
mt: Kont:

en: Hostname:
mt: Isem tal-kompjuter:

en: Please, choose your keyboard layout.
mt: Jekk jogħġbok, agħżel it-tqassim tat-tastiera.

en: Do you want the BackSpace to return Delete in console?
mt: Trid li l-Backspace tirritorna Delete fuq il-konsol?

en: The change is done, but to be effective you must logout
mt: Il-bidliet saru, imma biex ikunu effettivi trid tilloggja 'l barra

en: Mandrakelinux Tools Logs
mt: Log tal-għodda Mandrake

en: Show only for the selected day
mt: Uri għall-ġurnata magħżula biss

en: /File/_New
mt: /File/_Ġdid

en: /File/_Open
mt: /File/_Iftaħ

en: /File/_Save
mt: /File/I_kteb

en: /File/Save _As
mt: /File/Ikteb b'isem _ġdid

en: /File/-
mt: /Fajl/-

en: /Options/Test
mt: /Għażliet/Test

en: /Help/_About...
mt: /Għajnuna/_Dwar...

en: _:this is the auth.log log file
    Authentication
mt: Awtentikazzjoni

en: _:this is the user.log log file
    User
mt: Utent

en: _:this is the /var/log/messages log file
    Messages
mt: Messaġġi

en: _:this is the /var/log/syslog log file
    Syslog
mt: Syslog

en: search
mt: fittex

en: A tool to monitor your logs
mt: Għodda biex tifli l-logs

en: Settings
mt: Setings

en: Matching
mt: Jaqblu

en: but not matching
mt: li ma jaqblux

en: Choose file
mt: Agħżel fajl

en: Calendar
mt: Kalendarju

en: Content of the file
mt: Kontenut tal-fajl

en: Mail alert
mt: Twissija imejl

en: The alert wizard has failed unexpectedly:
mt: Is-saħħar ta' l-allerti waqaf abnormalment:

en: please wait, parsing file: %s
mt: stenna ftit, qed jinqara l-fajl: %s

en: Apache World Wide Web Server
mt: Server tal-World Wide Web Apache

en: Domain Name Resolver
mt: Risolvitur ta' ismijiet ta' dominji

en: Ftp Server
mt: Server FTP

en: Postfix Mail Server
mt: Server tal-imejl Postfix

en: Samba Server
mt: Server Samba

en: Webmin Service
mt: Servizz Webmin

en: Xinetd Service
mt: Servizz XInetd

en: Configure the mail alert system
mt: Ikkonfigura s-sistema ta' allerti bl-imejl

en: Stop the mail alert system
mt: Waqqaf is-sistema ta' allerti bl-imejl

en: Mail alert configuration
mt: Konfigurazzjoni allerti bl-imejl

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
mt: Merħba għall-għodda tal-konfigurazzjoni imejl.
    
    Hawn, tista' tissettja s-sistema tat-twissijiet.

en: What do you want to do?
mt: X'tixtieq tagħmel?

en: Services settings
mt: Seting tas-servizzi

en: You will receive an alert if one of the selected services is no longer running
mt: Tirċievi twissija jekk wieħed minn dawn is-servizzi ma jibqax jaħdem

en: Load setting
mt: Seting tat-tagħbija

en: You will receive an alert if the load is higher than this value
mt: Tirċievi twissija jekk it-tagħbija taqbeż dan il-valur

en: _: load here is a noun, the load of the system
    Load
mt: Tagħbija

en: Alert configuration
mt: Konfigurazzjoni tal-allerti

en: Please enter your email address below
mt: Jekk jogħġbok daħħal l-indirizz tal-imejl hawn taħt

en: and enter the name (or the IP) of the SMTP server you wish to use
mt: u daħħal l-isem (jew IP) tas-server SMTP li trid tuża

en: The wizard successfully configured the mail alert.
mt: Is-saħħar irnexxielu jikkonfigura l-allerti bl-email.

en: The wizard successfully disabled the mail alert.
mt: Is-saħħar irnexxielu jwaqqaf l-allerti bl-email.

en: Save as..
mt: Ikteb b'isem ġdid...

en: Please choose your mouse type.
mt: Jekk jogħġbok agħżel it-tip ta' maws.

en: Emulate third button?
mt: Emula t-tielet buttuna?

en: Mouse test
mt: Ittestja l-maws

en: Please test your mouse:
mt: Jekk jogħġbok ittestja l-maws:

en: Network is up on interface %s
mt: Network imtella' fuq interfaċċja %s

note: -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
en: Network is down on interface %s. Click on "Configure Network"
mt: Network imniżżla fuq interfaċċja %s. Ikklikkja "Ikkonfigura n-network"

en: Connect %s
mt: Tella' %s

en: Disconnect %s
mt: Waqqaf %s

en: Monitor Network
mt: Immonitorja network

en: Configure Network
mt: Ikkonfigura network

note: -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Refresh
mt: Erġa' tella'

en: Get Online Help
mt: Ikseb għajnuna online

en: Always launch on startup
mt: Dejjem ħaddem mat-tlugħ

en: Network Monitoring
mt: Monitoraġġ tan-network

en: Global statistics
mt: Statistika globali

en: Instantaneous
mt: Instantanju

en: Average
mt: Medju

en: Sending
    speed:
mt: Rata 'l
     barra:

en: Receiving
    speed:
mt: Rata 'l
    ġewwa:

en: Connection
    time:
mt: Ħin ta'
    konnessjoni:

en: Use same scale for received and transmitted
mt: Uża l-istess skala 'il ġewwa u 'l barra

en: Wait please, testing your connection...
mt: Stenna ftit... qed nittestja l-kollegament...

en: Disconnecting from Internet
mt: Aqta' minn ma' l-internet

en: Connecting to Internet
mt: Qed intella' l-internet

en: Disconnection from Internet failed.
mt: Ma stajtx naqta' minn ma' l-internet.

en: Disconnection from Internet complete.
mt: Skonnessjoni mill-internet lest.

en: Connection complete.
mt: Konnessjoni lesta.

en: Connection failed.
    Verify your configuration in the Mandrakelinux Control Center.
mt: Konnessjoni falliet.
    Ivverifika l-konfigurazzjoni fiċ-Ċentru tal-Kontroll Mandrakelinux.

en: Color configuration
mt: Konfigurazzjoni tal-kulur

en: sent:
mt: mibgħut:

en: received:
mt: riċevuti:

en: average
mt: medju

en: Local measure
mt: Miżura lokali

en: Warning, another internet connection has been detected, maybe using your network
mt: Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network tiegħek

en: No internet connection configured
mt: Ebda konnessjoni internet konfigurata

en: Reading data of installed printers...
mt: Qed tinqara d-data ta' printers disponibbli...

en: %s Printer Management Tool
mt: Għodda għall-Immaniġġjar tal-Printer %s

en: /_Actions
mt: /_Azzjonijiet

en: /_Add Printer
mt: /_Żid Printer

en: /Set as _Default
mt: /I_ssettja bħala Impliċitu

en: /_Edit
mt: /_Editja

en: /_Delete
mt: /_Ħassar

en: /_Expert mode
mt: /Modalità _esperti

en: /_Refresh
mt: /E_rġa' tella'

en: /_Configure CUPS
mt: /Ikkonfigura _CUPS

en: Search:
mt: Fittex:

en: Apply filter
mt: Applika filtru

en: Printer Name
mt: Isem tal-printer

en: Connection Type
mt: Tip ta' konnessjoni

en: Server Name
mt: Isem is-server

note: -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Add Printer
mt: Żid Printer

en: Add a new printer to the system
mt: Żid printer ġdid mas-sistema

note: -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Set as default
mt: Issettja bħala impliċitu

en: Set selected printer as the default printer
mt: Issettja l-printer magħżul bħala l-printer impliċitu

en: Edit selected printer
mt: Ibdel printer magħżul

en: Delete selected printer
mt: Ħassar printer magħżul

en: Refresh the list
mt: Erġa' tella' l-lista

note: -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
en: Configure CUPS
mt: Ikkonfigura CUPS

en: Configure CUPS printing system
mt: Ibdel is-sistema tal-ipprintjar CUPS

en: Enabled
mt: Mixgħul

en: Disabled
mt: Mitfi

en: Authors:
mt: Awturi:

en: SANE packages need to be installed to use scanners.
    
    Do you want to install the SANE packages?
mt: Iridu jiġu nstallati l-pakketti SANE sabiex tuża skaner.
    
    Trid tinstalla l-pakketti SANE?

en: Aborting Scannerdrake.
mt: Ħiereġ minn Scannerdrake.

en: Could not install the packages needed to set up a scanner with Scannerdrake.
mt: Ma setgħux jiġu nstallati paketti meħtieġa biex tissettja skaner bi ScannerDrake.

en: Scannerdrake will not be started now.
mt: Scannerdrake mhux se jittella' issa.

en: Searching for configured scanners...
mt: Qed jiġu mfittxija skaners konfigurati...

en: Searching for new scanners...
mt: Qed jiġu mfittxija skaners ġodda...

en: Re-generating list of configured scanners...
mt: Qed terġa' tiġi ġenerata lista ta' skaners konfigurati...

en: The %s is not supported by this version of %s.
mt: "%s" m'hux sapportjat minn din il-verżjoni ta' %s.

en: %s found on %s, configure it automatically?
mt: %s instab fuq %s, trid tikkonfigurah awtomatikament?

en: %s is not in the scanner database, configure it manually?
mt: %s m'hux fid-database tal-iskaners; trid tikkonfigurah manwalment?

en: Select a scanner model
mt: Agħżel mudell ta' skaner

en: Detected model: %s
mt: Mudell misjub: %s

en: Do not install firmware file
mt: Tinstallax fajl ta' firmware

en: It is possible that your %s needs its firmware to be uploaded everytime when it is turned on.
mt: Jista' jkun li %s għandu bżonn il-firmware jiġi nstallat fuqu kull meta jinxegħel.

en: If this is the case, you can make this be done automatically.
mt: Jekk dan huwa l-każ, tista' tagħmel dan awtomatikament.

en: To do so, you need to supply the firmware file for your scanner so that it can be installed.
mt: Biex tagħmel dan, trid tissupplixxi fajl bil-firmware għall-iskaner tiegħek ħalli jkun jista' jiġi nstallat.

en: You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition.
mt: Tista' ssib il-fajl fuq is-CD jew flopi li jiġi ma' l-iskaner, jew fuq il-website tal-manufattur, jew fuq il-partizzjoni Windows.

en: Install firmware file from
mt: Installa fajl ta' firmware minn

en: Select firmware file
mt: Agħżel fajl ta' firmware

en: The firmware file %s does not exist or is unreadable!
mt: Il-fajl ta' firmware %s ma jeżistix jew ma jistax jinqara.

en: It is possible that your scanners need their firmware to be uploaded everytime when they are turned on.
mt: Jista' jkun li l-iskaners għandhom bżonn il-firmware jiġi nstallat fuqhom kull meta jinxegħlu.

en: To do so, you need to supply the firmware files for your scanners so that it can be installed.
mt: Biex tagħmel dan, trid tissupplixxi fajls bil-firmware għall-iskaners tiegħek ħalli jkun jista' jiġi nstallat.

en: If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file.
mt: Jekk diġà nstallajt il-firmware tal-iscanner tista' taġġornah hawn billi tissupplixxi l-fajl ġdid tal-firmware.

en: Install firmware for the
mt: Installa firmware għal

en: Select firmware file for the %s
mt: Agħżel fajl tal-firmware għal %s

en: Could not install the firmware file for the %s!
mt: Ma stajtx ninstalla l-fajl firmware għal %s!

en: The firmware file for your %s was successfully installed.
mt: Il-fajl firmware għal %s ġie nstallat.

en: The %s is unsupported
mt: %s mhux sapportit

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the %s Control Center in Hardware section.
mt: %s irid jiġi konfigurat minn printerdrake.
    Tista' tħaddem lill printerdrake miċ-Ċentru tal-Kontroll %s fis-sezzjoni Ħardwer.

en: Auto-detect available ports
mt: Agħraf ports disponibbli awtomatikament

en: Please select the device where your %s is attached
mt: Agħżel l-apparat fejn hu mqabbad %s.

en: (Note: Parallel ports cannot be auto-detected)
mt: (Nota: Ports paralleli ma jistgħux jingħarfu awtomatikament)

en: choose device
mt: agħżel apparat

en: Searching for scanners...
mt: Qed infittex skaners...

en: Your %s has been configured.
    You may now scan documents using "XSane" or "Kooka" from Multimedia/Graphics in the applications menu.
mt: %s issa ġie konfigurat.
    Tista' tiskannja dokumenti permezz ta' "XSane" jew "Kooka" taħt Multimedia/Grafika fil-menu tal-programmi.

en: The following scanners
    
    %s
    are available on your system.
mt: Dawn l-iskaners
    
    %s
    huma disponibbli fuq is-sistema tiegħek.

en: The following scanner
    
    %s
    is available on your system.
mt: L-iskaner
    
    %s 
    huwa disponibbli fuq is-sistema.

en: There are no scanners found which are available on your system.
mt: Ma nstab ebda skaner disponibbli fuq is-sistema.

en: Search for new scanners
mt: Fittex skaners ġodda

en: Add a scanner manually
mt: Żid skaner manwalment

en: Install/Update firmware files
mt: Installa/aġġorna fajl firmware

en: Scanner sharing
mt: Qsim ta' skaner

en: All remote machines
mt: Kompjuters remoti kollha

en: This machine
mt: Dan il-kompjuter

en: Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines.
mt: Hawn tista' tagħżel jekk l-iskaners imqabbdin ma' dan il-kompjuter għandhomx ikunu aċċessibbli għal kompjuters remoti, u liema kompjuters.

en: You can also decide here whether scanners on remote machines should be made available on this machine.
mt: Tista' wkoll tagħżel jekk skaners fuq kompjuters remoti għandhomx ikunu disponibbli fuq dan il-kompjuter.

en: The scanners on this machine are available to other computers
mt: L-iskaners fuq dan il-kompjuter huma aċċessibbli għal kompjuters oħrajn

en: Scanner sharing to hosts:
mt: Offerta ta' skaner ma' kompjuters:

en: Use scanners on remote computers
mt: Uża skaners fuq kompjuters remoti

en: Use the scanners on hosts:
mt: Uża skaners fuq dawn il-kompjuters:

en: Sharing of local scanners
mt: Qsim ta' skaners lokali

en: These are the machines on which the locally connected scanner(s) should be available:
mt: Dawn huma l-kompjuters fejn l-iskaner(s) imqabbdin lokalment ikunu disponibbli:

en: Add host
mt: Żid kompjuter

en: Edit selected host
mt: Ibdel il-kompjuter magħżul

en: Remove selected host
mt: Neħħi l-kompjuter magħżul

en: Name/IP address of host:
mt: Isem/IP tal-kompjuter:

en: Choose the host on which the local scanners should be made available:
mt: Agħżel il-kompjuter li fuqu għandhom jintwerew skaners lokali:

en: You must enter a host name or an IP address.
mt: Trid iddaħħal isem jew IP ta' kompjuter.

en: This host is already in the list, it cannot be added again.
mt: Dan il-kompjuter diġà fil-lista, ma jistax jerġa' jiġi miżjud.

en: Usage of remote scanners
mt: Użu ta' skaners remoti

en: These are the machines from which the scanners should be used:
mt: Dawn huma l-kompjuters mnejn jistgħu jintużaw l-iskaners:

en: saned needs to be installed to share the local scanner(s).
    
    Do you want to install the saned package?
mt: Irid jiġi nstallat saned sabiex taqsam skaners lokali.
    
    Trid tinstalla l-pakkett saned?

en: Your scanner(s) will not be available on the network.
mt: L-iskaners mhux se jkunu disponibbli fuq in-network.

en: Some devices in the "%s" hardware class were removed:
mt: Xi apparat fil-klassi tal-ħardwer "%s" tneħħew:

en: - %s was removed
mt: - %s tneħħa

en: Some devices were added: %s
mt: Xi apparat ġie miżjud: %s

en: - %s was added
mt: - %s ġie miżjud

en: Hardware probing in progress
mt: Għaddej l-għarfien tal-ħardwer

en: Hardware changes in "%s" class (%s seconds to answer)
mt: Tibdil fil-ħardwer fil-klassi "%s" (%s sekondi biex twieġeb)

en: Do you want to run the appropriate config tool?
mt: Trid tħaddem l-għodda ta' konfigurazzjoni?

en: Language
mt: Agħżel il-lingwa

en: License
mt: Liċenzja

en: Configure mouse
mt: Ikkonfigura l-maws

en: Hard drive detection
mt: Għarfien tal-ħard disk

en: Select installation class
mt: Agħżel klassi ta' installazzjoni

en: Choose your keyboard
mt: Agħżel tastiera

en: Partitioning
mt: Partizzjonament

en: Format partitions
mt: Ifformattja partizzjonijiet

en: Choose packages to install
mt: Agħżel pakketti biex tinstalla

en: Install system
mt: Installa s-sistema

en: Add a user
mt: Żid user

en: Configure networking
mt: Ikkonfigura network

en: Install bootloader
mt: Installa bootloader

en: Configure X
mt: Ikkonfigura X

en: Configure services
mt: Ikkonfigura servizzi

en: Install updates
mt: Installa aġġornamenti

en: Exit install
mt: Oħroġ mill-installazzjoni

en: Is this correct?
mt: Dan tajjeb?

en: Expand Tree
mt: Espandi friegħi

en: Collapse Tree
mt: Agħlaq friegħi

en: Toggle between flat and group sorted
mt: Aqleb bejn lista sempliċi jew kategorizzata

en: %s is not installed
    Click "Next" to install or "Cancel" to quit
mt: %s m'hux installat
    Klikkja "Li jmiss" biex tinstalla jew "Ikkanċella" biex tieqaf

en: Installation failed
mt: Installazzjoni falliet
