DrakX for MDK 9.2 - en to sq translation catalogue (2819 entries)

en: Scanning partitions to find mount points
sq: Scanimi i ndarjeve p�r ti gjetur pikat montuese

en: if set to yes, check additions/removals of suid root files.
sq: n�se konfigurohet me po, verifikoji mbledhjet/e zhdukshme nga skedaret suid root.

en: %s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...
sq: %s: %s emri i ftuesit t� d�shiruar, MAC adresa, IP, imazhi-nbi, 0/1 p�r KLIENT_HOLL�, 0/1 p�r Konfigurim Lokal...

en: Configuration changed - restart clusternfs/dhcpd?
sq: Ndryshimi i konfigurimit - rinise clusternfs/dhcpd?

en: 		Erase=%s
sq: 		Shlyeje=%s

en: Differential backups only save files that have changed or are new since the original 'base' backup.
sq: Backup-et e ndrysh�m vet�m p�r skedarer e regjistruarat� cilat ju u keni ndryshuar apo jan� m� t� reja se backup i 'baz�s'.

en: network printer port
sq: porta e stampuesit n� rrjet

en: Please insert floppy disk:
sq: Ju lutemi futni nj� disket� flopi n� lexues:

en: The backup partition table has not the same size
    Still continue?
sq: P�rmbajtja e tabelave ndar�se nuk posedon madh�si t� nj�jt�
    A d�shironi t� vazhdoni?

en: Which username
sq: Cilin em�r t� p�rdoruesit

en: Which type of entry do you want to add?
sq: �far� tipi t� sistemit d�shironi t� shtoni?

en: Restore partition table
sq: Restauroje tabel�n ndar�se

en: Configure hostname...
sq: Konfiguroje emrin e ftuesit...

en: On CUPS server "%s"
sq: Mbi severin CUPS "%s"

en: Post-install configuration
sq: Konfigurimi i postit-instalues

en: The current security level is %s
    Select permissions to see/edit
sq: Niveli prezent i siguris� �sht� %s
    Zgjedh� lejimet shiquese/�faq�se

en: Use ``%s'' instead
sq: P�rdore m� par� k�te ``%s''

en: Type
sq: Tipi

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
sq: 
    Njashtu stampuesit e konfiguruar me skedaret PPD t� furnizuar n� uzinat e tyre apo me pilot�t CUPS nuk mund t� trasferohen.

en: The following printer
    
    %s%s
    are directly connected to your system
sq: Stampuesi i radhitur
    
    %s%s
    �sht� i lidhur direkt n� sistemin tuaj

en: Central African Republic
sq: Republika Qendro Afrikane

en: Gateway device
sq: Periferik i Port�s Hyr�se Gateway

en: Advanced preferences
sq: P�lqimet P�rparuese

en: Net Method:
sq: Metod� Rrjeti:

en: Ethernetcard
sq: Kartel� ethernet

en: If set, send the mail report to this email address else send it to root
sq: N�se konfigurohet, d�rgoje nj� raport mail n� k�t� adres� e-mail p�rdryshe d�rgoje tek administratori (root).

en: Parameters
sq: Parametrat

en: no
sq: jo

en: Auto-detect
sq: Auto-zbulues

en: Interface:
sq: Interfaci:

en: Select installation class
sq: Zgjedhe klas�n e instalimit

en: The system doesn't seem to be connected to the Internet.
    Try to reconfigure your connection.
sq: Sistemi me sa duket nuk �sht� i lidhur n� Internet.
    Provoni ta ri-konfiguroni lidhjen tuaj.

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
sq: Lidheni stampuesin tuaj n� serverin Linux dhe lejoni q� makina Windows t� lidhet sikur klient.
    
    A me t� v�rtet d�shironi t� vazhdoni rregullimin e ketij stmapuesi n� k�t� m�nyr�?

en: Belarus
sq: Rusia e Bardh�

en: Error writing to file %s
sq: Gabim gjat� shkrimit n� skedaren %s

en: Report check result to syslog
sq: Rezultat i raportit verifikues n� syslog

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
sq: apmd v�shtron gjendjen e bateris� t� nj� kompjuteri celular�, dhe mban� nj�
    gjurm� t� via syslog. I cili mund t� p�rdoret p�r ndaljen e kompjuterit n� m�nyr� t� rregult� duke i informuar p�rdoruesit e tjer�.

en: Use tape to backup
sq: P�rdore kaset�n p�r regjistrim

en: The following packages are going to be installed
sq: Pakot e radhitura do t� instalohen

en: CUPS configuration
sq: Konfigurimi CUPS

en: Total progress
sq: P�rparim total

en: Hong Kong
sq: Hong Kongu

en: Not enough free space to allocate new partitions
sq: Nuk posedon vend� t� mjaftuesh�m, p�r t� b�r� ndarje t� reja

en: Moving
sq: Zhvendosje

en: 
    Drakbackup activities via %s:
sq: 
    aktivitet Drakbackup via %s:

en: yes
sq: po

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
sq: Mir�sevini n� Asistenitin e Konfigurimin t� Rrjetit (Network).
    
    Ne jemi n� pik�n konfiguruese t� lidhjes s� internetit dhe t� rrjetit.
    N�se ju nuk d�hironi ta p�rdoni zbuluesin automatik, �zgjedheni kutin p�rkat�se.

en: Lebanon
sq: Libia

en: Stop
sq: Ndale

en: Edit selected host
sq: Botoje ftusin e zgjedhur

en: No CD device defined!
sq: Asnj� mjet i p�rcaktuar p�r CD!

en: 	Use .backupignore files
sq: 	P�dorni skedaret .backupignore

en: Bulgarian (phonetic)
sq: Bulgarishte (fonetik)

en: The DHCP start ip
sq: DHCP nisur ip

en: Don't rewind tape after backup
sq: Mos e mb�shtjell� kaset�n mbas backup

en: Bootloader main options
sq: Opcionet kryesore t� programit Bootloader

en: Tape
sq: Kaset�

en: Malaysia
sq: Malejzia

en: Scanning network...
sq: V�zhgimi i rrjetit...

en: With this option you will be able to restore any version
     of your /etc directory.
sq: Me k�t� mund�si ju mund ta restauroni gjdo version tuaj
     n� repertorin /etc.

en: The change is done, do you want to restart the dm service ?
sq: Ndryshimi �sht� b�r�, A d�shironi ta rinisni sh�rbimin dm?

en: Swiss (French layout)
sq: Zvic�rrane (frangjishte)

en: August
sq: gusht

en: mkraid failed (maybe raidtools are missing?)
sq: mkraid d�shtoi (ndoshta veglat grabit�se mungojn�?)

en: size of the (second level) cpu cache
sq: madh�sia e cpu s� fshehur (niveli i dyt�)

en: Soundcard
sq: Kartel� z�ri

en: Month
sq: Muaji

en: Search for files to restore
sq: Hulumtim p�r skedaret riparuese

en: Luxembourg
sq: Luksemburgu

en: To print a file from the command line (terminal window) use the command "%s <file>".
sq: P�r t� shtypur nj� skedare nga linja komanduese (dritare terminali) p�rdore urdh�rin "%s <skedare>".

en: Level %s
sq: Niveli %s

en: Syriac (phonetic)
sq: Siriak (fonetic)

en: Iran
sq: Irani

en: Iraq
sq: Iraki

en: Potential LAN address conflict found in current config of %s!
sq: Konflikt potencial i adres�s s� rrjetit lokal, �sht� paraqitur n� konfigurimin e %s!

en: Configuring...
sq: Konfigurimi n� vazhdim e sip�r...

en: The setup has already been done, and it's currently enabled.
sq: Konfigurimi �sht� ve�se i kryer, dhe aktualisht �sht� i lidhur.

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
sq: P�r nj� shumic� t� madhe kartelash t� reja TV, muduli bttv i b�rtham�s GNU/Linux do ti auto-zbuloj parametrat e p�rsosur.
    N�se kartela juaj �sht� zbuluar gabimisht, at�her� ju mund ta forconi tuner dhe tipin e kartel�s s� sakt� k�tu. Ju mbetet vet�m ti zgjidhni parametrat e nevojsh�m t� kartel�s suaj TV(ve)

en: Password (again)
sq: Parulla (p�rs�ri)

en: Search installed fonts
sq: Hulumtoi polisat e instaluara

en: Default desktop
sq: Tryez� me marr�veshje

en: IP address
sq: Adresa IP

en: Choose the sizes
sq: Zgjedhi madh�sit�

en: List of data corrupted:
sq: Listoi t� dh�nat e d�mtuara:

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
sq: Mundet vet�m t� me qart�si (i.e.,
    opcioni -a nuk do t� kudht�zoj ndonji porblem n� montimin e sistemit t� skedares).

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
sq: Modemi i juaj nuk p�rkrahet nga sistemi.
    Shiqoni n� http://www.linmodems.org

en: Choose another partition
sq: Zgjedheni nj� ndarje tjet�r

en: Current user
sq: P�rdoruesi aktual

en: Username
sq: Emri i p�rdoruesit

en: Left "Windows" key
sq: �el�si "Windows" majtas

en: Guyana
sq: Guijana

en: dhcpd Server Configuration
sq: Konfigurimi i Serverit dhcpd

en: Used for directory:
     only owner of directory or file in this directory can delete it
sq: P�rdorues p�r repertor:
     z�vend�sohet vet�m nga nj� repertor� apo skedare, mir�po n� t� nj�jtin repertor mund t� zhduket.

en:  on Novell server "%s", printer "%s"
sq:  n� server Novell "%s", stampuesi "%s"

en: Printer Name
sq: Stampoje Emrin

en: Remove a module
sq: Zhduke nj� modul

en: Password
sq: Parulla

en: Advanced Configuration
sq: Konfigurimi me P�rparsi

en: Scanning on your HP multi-function device
sq: Skanimi i mjetit tuaj HP multi-funksionues

en: Root
sq: Ndarje Rr�nj�zore

en: Choose an existing RAID to add to
sq: Zgjedheni nj� RAID ekzistues p�r ta shtuar n�

en: Turkish (modern "Q" model)
sq: Turke (model modern "Q"

en: Lilo message not found
sq: Lajmi LILO nuk gjindet

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
sq: Prodhues automatik i b�rtham�s n� /nisje t� udh�zuar (/boot) p�r
    /usr/include/linux/{autoconf,version}.h

en: if needed
sq: n�se nevojitet

en: Restore Failed...
sq: Riparimi D�shtoi...

en: /Autodetect _jazz drives
sq: /Auto-zbulues i pilotve _jazz

en: Store the password for this system in drakbackup configuration.
sq: Ruaje k�t� parull� p�r k�t� sistem konfigurues drackbackup.

en: Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.
sq: Parath�nie
    
    Sistemi eksploatues dhe i komponimeve t� tjera n� disponibilitet n� 
    shp�rndarjen Mandrake Linux jan� t� emruar "Produkte Software".
    Produketet Softver p�rmbajn�, mir�po nuk i n�nshtrohen bashk�sis� 
    s� programeve, t� m� parme, rregullave dhe dukumentacionit 
    mbi eksploatimin e sistemeve dhe komponimeve t� ndryshme t� 
    shp�rndarjes Mandrake Linux.
    
    
    1. Licenca
    
    Ju lutemi lexoni me v�mendje dokumentin vijues. Ky dokument p�rmban 
    kontrat�n e licenc�s mes jush dhe 
    MandrakeSoft S.A. i p�rmbajtur n� programe.
    Duke instaluar, riprodhuar apo p�rdoruar programet n� �far�do 
    m�nyre 
    q� jan� sh�nuar, dhe ju e njifni, i pranoni kontratat, termet 
    dhe kushtet e licenc�s.
    N�se ju nuk pajtoheni me k�to terme t� licenc�s, ju nuk jeni i detyruar tiinstaloni, dufyshoni apo ti p�rdorni n� 
    Produketet Softver. 
    N� rast t� p�rpjekjes, t� instalimit, dyfishimit apo p�rdorimit t� Produketeve Software n� �far�do m�nyre q� nuk p�rputhen 
    me termet dhe kondicionet e Licenc�s t� drejtat tuaja do t� shuhen nd�r k�t� 
    Licenc�. N� rast se p�rfundohet Licenca, ju duhet ti shkat�rroni t� gjitha kopjet e
    Produkteve Software.
    
    
    2. Kufizim i Garanc�s
    
    Produktet Software dhe dokumnetacionet e bashkangjitura jan� t� furnizuara "siq jan�" pa garanc�, dhe 
    p�rgjegj�sit� vijuese me ligj.
    MandrakeSoft S.A. nuk merr� kurr�far� p�rgjegj�sie n� prodhimin e ndonji porblemi, d�mi direkt, (duke mos marr� parasysh kufizimet e d�meve 
    n� humbje t� biznisit, ndaljen e biznisit, humbjes finaciare dhe d�nimet nga gjykata, 
    apo �far�do hymbje tjet�r) me shlyerjen e jasht� p�rdorimit apo mos lejimin e p�rdorimit t� Softver�ve, d�mshp�rblimet duhet 
    t� kthehen nga vendosm�ria Produkteve, edhe n�se MandrakeSoft S.A. �sht� i informuar 
    p�r arritjen e nj� d�mi.
    
    K�SHILL� N� MBAJTJEN APO P�RDORIMIN E PROGRAMEVE T� NDALUARA N� DISA SHTETE
    
    N� asnj� m�nyr�, as MandrakeSoft S.A. apo furnizuesit e tij nuk mund t� jen� 
    p�rgjegj�s, p�r ar�sye t� nj� d�mi special, direkt apo indirekt (duke mos p�rfshir� 
    kifizimin e d�mit, humbjes s� benificimit, nd�rprerjeve punuese humbjes s� 
    informacioneve komercializuese apo humbje tjera njashtu d�nimet dhe damshp�rblimet duhet t� derdhen simbas
    nj� vendimi gjygj�sor) i cili do t� b�j� nj� p�rdorim 
    apo transferim t� Mandrake Linux t� programeve t� ndaluara me legjitimitet, nga i cili ju b�ni pjes�.
    Ky njoftim i p�rket� njashtu edhe disa programeve t� 
    kriptografis� t� furnizuar me programe.
    
    
    3. Licenca GPL dhe Licenca t� tjera
    Programet jan� me p�rmbajtje modulesh, programet jan� krijuar nga persona t� ndrysh�m. Pjesa m� e madhe 
    jan� t� qeverisur nd�r termet dhe kushtet e GNU General Public 
    Licenc�, e quajtur "GPL", apo licenc� e nj�jt�. Pjes�n m� t� madhe t� k�tyre licencave mund ti p�rdoroni, 
    ti dyfishoni, ti adaptoni apo ti rishp�rndani. Ju lutemi lexoni me v�mendje termet 
    dhe kushtet e licenc�s, pajtimet p�r secilin komponent para se ta p�rdorni nj�rin nga ta. Secila pyetje 
    p�r licencat e komponeneteve duhet ti adresohet autorit dhe jo tek MandrakeSoft.
    Program Zhvilluesi nga MandrakeSoft S.A. �sht� i qeverisur nga Licencat GPL. Shkrimet n� Dokumentacionet 
    nga MandrakeSoft S.A. jan� t� qeverisura nga licenca e specifikuar. Ju lutemi referohuni n� dokumentacion p�r 
    m� shum� detaje.
    
    
    4. P�rpar�sit e t� Drjetave Intelektuale
    
    T� gjitha t� drejtat e komponentevet� e Produkteve Software, i takojn� autor�ve dhe jan� 
    t� mbrojtura nga p�rpar�sit� intelektuale, t� drejtat e botimit, dhe aplikimi i ligjeve n� programet softver.
    MandrakeSoft S.A. rezervon t� drejtat p�r ndryshimin dhe adaptimin e Produkteve Softver, n� t�r�si apo n� nj� 
    pjes�, d.m.th. t� gjitha propozimet e mundshme.
    "Mandrake", "Mandrake Linux" dhe logot e shoq�ruara jan� mark� shp�rndar�se e MandrakeSoft S.A.  
    
    
    5. Ligjet Qeveritare
    
    N�se nj� p�lqim vendoset me k�t� kontrat, duhet t� deklarohet me zero 
    ilegalisht apo i p'aplikuar nga nj� gjykat� kompetente kjo vendosje, do t� t�rhiqet nga kontrata 
    prezente.
    Termet dhe kushtet jan� t� Licensuara, dhe t� qeverisura nga Ligjet Franceze.
    T� gjitha bisedimet mbi termet e licenc�s mund t� rregullohen jasht� ligjit n� m�nyr� miq�sore. N�se nuk jeni dakord 
    rasti duhet ti parqitet gjykat�s tribunale n� Paris - France.
    P�r m� shum� pyetje n� lidhje me k�t� dokument, ju lutemi kontaktone MandrakeSoft S.A.

en: Default user
sq: P�rdorues me marr�veshje

en: the progress bar x coordinate
    of its upper left corner
sq: koordinatat n� x, n� k�ndin e lart� t� majt�
    n� shufr�n p�rparuese

en: Current interface configuration
sq: Konfigurimi i interfacit t� tanish�m

en: LPD - Line Printer Daemon
sq: LPD - Stampues i Linj�s Daemon

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
sq: 
    N�se ju posedoni nj� kartel� ISA, t� dh�nat e ekranit t� ardhsh�m duhet t� jen� korrekte.
    N�se ju posedoni nj� kartel� PCMCIA, ju duhet ti njifni rregullat "irq" dhe "io" t� kartel�s suaj.

en: Do not print any test page
sq: Mos stampo asnj� faqe testi

en: Gurmukhi
sq: Gurmuki

en: %s already in use
sq: %s �sht� n� p�rdorim e sip�r

en: Force No APIC
sq: Forcoje Nr APIC

en: This password is too short (it must be at least %d characters long)
sq: Kjo parull� �sht� shum� e shkurt�r (duhet t� jet� m� s� paku e gjat� prej %d simboleve)

en: [keyboard]
sq: [tastiera]

en: Install List
sq: Instaloje List�n

en: Change
    Restore Path
sq: Nd�rro
    Riparoje Shtegun

en: Show only for the selected day
sq: �faqi vet�m p�r dit�t e zgedhura

en: 	Limit disk usage to %s MB
sq: 	Kufizimi i diskut t� p�rdorur n� %s Mb

en: Logs
sq: Lidhjet

en: (Note: Parallel ports cannot be auto-detected)
sq: (Sh�nim: Portat paralele nuk mund t� zbulohen automatikisht)

en: What kind of card do you have?
sq: �far� tipi t� kartel�s posedoni?

en: Security
sq: Siguria

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
sq: Ju keni mund�sin q� ta p�rdorni interfacin grafik "xpdq" p�r opcionet e rregullimit dhe t� pun�ve administruese gjat� stampimit.
    N�se ju jeni duke e p�rdorur tryez�n KDE, ju posedoni nj� "kops� panik", n� nj� ikon� t� tryez�s, t� etiketuar me "NDALE Stampuesin!", i cili do t� ndal� shtypjet n� vazhdim e sip�r. Kjo mund t� p�rdoret n� raste t� blokimit t� nj� letre n� stampues.

en: Unable to find backups to restore...
sq: E pa mundur gjetja e backups p�r ta riparuar...

en: Unknown
sq: I pa njoftur

en: This server is already in the list, it cannot be added again.
sq: Ky server �sht� ve�se n� list�, dhe nuk mund t� shtohet p�rs�ri.

en: Network Configuration
sq: Konfigurimi i rrjetit (Network)

en: Protocol for the rest of the world
    No D-Channel (leased lines)
sq: Protokol p�r pjes�n tjet�r t� bot�s
    Pa D-Kanal (vija t� huazuara)

en: Option %s must be a number!
sq: Opcioni %s duhet t� jet� nj� num�r!

en: Notice
sq: Njoftim

en: You have not configured X. Are you sure you really want this?
sq: Ju nuk e keni konfiguruar serverin X. A jeni i sigurt, se e d�shironi k�t�?

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
sq: Konfigurimi i k�tij stampuesi do t� b�het n� menyr� automatike. N�se ai nuk �sht� zbuluar n� m�nyr� korrekte, apo d�shironi t� b�ni nj� konfigurim personel, aktivizoni "Konfigurim Manuel".

en: What type of partitioning?
sq: �far� tipi i ndarjes?

en: file list sent by FTP: %s
sq: lista e skedareve �sht� d�rguar mes FTP: %s

en: Interface
sq: Interfaci

en: Multisession CD
sq: Multi-sesion p�r CD

en: comma separated strings
sq: vargje t� ndara me presje

en: These are the machines from which the scanners should be used:
sq: K�to jan� makinat nga t� cilat skaner�t duhet t� p�rdoret:

en: Messages
sq: Lajmet

en: Unknown|CPH06X (bt878) [many vendors]
sq: I pa njoftur|CPH06X (bt878) [shum� shit�s]

en: POP and IMAP Server
sq: Server POP dhe IMAP

en: Mexico
sq: Meksiko

en: Model stepping
sq: Etap� e modelit

en: Rwanda
sq: Ruand�s

en: Switzerland
sq: Zvic�rra

en: Brunei Darussalam
sq: Brunei i Sulltanit

en: Do you have any %s interfaces?
sq: A posedoni ndonji interface %s?

en: You must be root to read configuration file.
sq: Ju duhet t� jeni administrator p�r ta lexuar skedaren configuruese.

en: Remote lpd Printer Options
sq: Opcionet i nj� stampuesi lpd

en: GNU/Linux is a multi-user system, meaning each user may have their own
    preferences, their own files and so on. You can read the ``Starter Guide''
    to learn more about multi-user systems. But unlike "root", who is the
    system administrator, the users you add at this point will not be
    authorized to change anything except their own files and their own
    configurations, protecting the system from unintentional or malicious
    changes that impact on the system as a whole. You will have to create at
    least one regular user for yourself -- this is the account which you should
    use for routine, day-to-day use. Although it is very easy to log in as
    "root" to do anything and everything, it may also be very dangerous! A
    very simple mistake could mean that your system will not work any more. If
    you make a serious mistake as a regular user, the worst that will happen is
    that you will lose some information, but not affect the entire system.
    
    The first field asks you for a real name. Of course, this is not mandatory
    -- you can actually enter whatever you like. DrakX will use the first word
    you typed in this field and copy it to the "%s" field, which is the name
    this user will enter to log onto the system. If you like, you may override
    the default and change the username. The next step is to enter a password.
    From a security point of view, a non-privileged (regular) user password is
    not as crucial as the "root" password, but that is no reason to neglect
    it by making it blank or too simple: after all, your files could be the
    ones at risk.
    
    Once you click on "%s", you can add other users. Add a user for each one
    of your friends: your father or your sister, for example. Click "%s" when
    you have finished adding users.
    
    Clicking the "%s" button allows you to change the default "shell" for
    that user (bash by default).
    
    When you have finished adding users, you will be asked to choose a user
    that can automatically log into the system when the computer boots up. If
    you are interested in that feature (and do not care much about local
    security), choose the desired user and window manager, then click "%s".
    If you are not interested in this feature, uncheck the "%s" box.
sq: GNU/Linux �sht� nj� sistem multi-p�rdorues, q� d.m.th. n� shumic�n e rasteve
    secili p�rdorues mund t� posedoj p�lqime t� ndryshme p�r skedaret e tyre,
    etj. P�r m� shum� infomacione, konsultoni ``Doracakun Nis�s'' p�r t� ditur
    m� shum� mbi sistemin e multi p�rdoruesve.
    P�rkundarzi n� "root", q� �sht� administrator, p�rdoruesit e shtuar n� k�t�
    vend, do t� ken� leje p�r qeverisje vet�m n� skedaret e tyre. P�rdoruesi
    administrator duhet t� krijoj nj� konto normale t� nj� p�rdoruesi t� rregullt
    p�r nevojat tuaja -- kjo konto do t� p�rdoret gjdo dit�.
    Pa marr� pasysh se a do t� jet� r leht� lidhja e administratorit "root"
    p�r t� verpruar gjdo gj� q� �sht� e mundur, dhe mund t� jet tejet e rrezikshme!
    Nj� gabim i vog�l mund t� blokoj t�r� sistemin tuaj, dm.m.th. nuk do t�
    niset si� duhet. N�se ju b�ni nj� gabim serioz at�her sikur p�rdorues normal
    e t�ra q� mund t� b�ni �sht� t� zhdukni disa informacione dhe nuk mund t�
    shkaktoni d�me tjera kudo qoft�.
    
    N� fillim duhet t� futni emrin e v�rtet t� personit. Njashtu, ju mund t�
    shkruani �far� t� doni. DrakX do ta pranoj fjal�n e par� t� futur dhe do ta
    d�rgoj� tek "%s". Em�r i cili do t� p�rdoret p�r tu lidhur n� sistem.
    Ju mund ta ndryshoni. Tani duhet t� futni parull�n. Kjo nuk �sht� aq v�shtir�
    �sht� vet�m parulla e administratorit "root", mir�po nuk �sht� nj� ar�sye
    t� shkruhet sikur 123456. Mbas� t� tjerash, kjo mund ti vendos skedaret tuaja
    n� rrezik.
    
    N�se klikoni mbi "%s", do t� keni mund�sin� p�r t� shtuar p�rdorues
    t� tjer�. Krijoni p�rdorues t� ndrysh�m p�r �do person� me mund�si
    p�r ta p�rdorur kompjuterin. Mbasi q� t� gjith� p�rdoruesit p�rcaktohen
    klikoni mbi "%s".
    
    N�se klikoni mbi "%s", ju mund ta zgjedhni nj� "shell" vet�m
    p�r at� p�rdorues (bash �sht� shell-i me marr�veshje).
    
    Mbasi t� p�rfundoni me shtuarjen e p�rdoruesve, do t� keni mund�sin� t�
    zgjedhni nj� p�rdorues q� t� lidhet automatikisht kur kompjuteri juaj niset
    nga fillimi. N�se ju interson ky sistem n� t� ardhm�n (dhe nuk kujdeseni
    shum� p�r sigurin� lokale), zgjedheni p�rdoruesin e caktuar dhe dritaren
    administruese, dhe klikoni mbi "%s". N�se kjo nuk ju interson n� t�
    ardhm�n, at�her� �zgjedheni kutin� "%s".

en: Configure Internet Access...
sq: Konfiguroi Hyrjet n� Rrjet...

en: Please choose the time interval between each backup
sq: Ju lutemi zgjedheni intevalin e koh�s p�r secilin regjistrim

en: Norway
sq: Norvegjia

en: Delete profile
sq: Zhduke profilin

en: Danish
sq: Danishte

en: Automatically switch on numlock key locker under console
    and XFree at boot.
sq: Lidhja automatike e nj� mbyllje numerike me �el�s mbyll�s n� konsoll�
    dhe XFree n� nisje t� udh�zuar.

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
sq: Ju lutemi konfigurone IP-n� n� k�t� makin�.
    Secila zon� duhet t� jet� e kompletuar me nj� adres� IP n� sh�nim
    decimal shenjues (p�r shembull: 1.2.3.4).

en: The Mandrake Linux installation is distributed on several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM so it will eject
    the current CD and ask you to insert the correct CD as required.
sq: Pakot e nevojshme p�r Instalimin e Linux Mandrake jan� t� shp�rndara n� shum�
    CDROM-e. Fat�mir�sisht, DrakX i njef t� gjitha lokacinet e pakove n� CDROM-e.
    Ai do ta qet� jasht� CD-n� q� gjindet n� lexuesin e CD-ve, dhe juve do t� ju
    pyes, q� ta futni CD-n� tjet�r t� nevojshme n� lexues.

en: When checked, owner and group won't be changed
sq: Mbasi t� verifikohet, pronari dhe grupi nuk do t� ndryshoshet

en: Tuesday
sq: e mart�

en: Processors
sq: Procesor�t

en: Svalbard and Jan Mayen Islands
sq: Ishujt Svalbard dhe Jan Majen

en: No NIC selected!
sq: Asnj� zgjedhje p�r NIC!

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
sq: Disa probleme jan� lajm�ruar gjat� konfigurimit.
    Testone lidhjen tuaj tek Qendra Kontrolluese Mandrake, apo me urdherin� net_monitor. N�se lidhja juaj nuk fonksionon, ju mund ta ri-nisni konfigurimin.

en: partition %s is now known as %s
sq: ndarja %s tani �sht� e njoftur sikur %s

en: Backup Other files...
sq: Regjistrimi i Skedareve t� tjera...

en: Congo (Kinshasa)
sq: Kongo (Kinshasa)

en: SMB server IP
sq: Adresa IP e serverit SMB

en: Partition table of drive %s is going to be written to disk!
sq: Tabela e ndarjeve %s tani do t� shkruhet n� disk�!

en: Installing HPOJ package...
sq: Intalimi i pakove HPOJ...

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
sq: Nj� disket� boot mund�son nisjen e sistemin tuaj Linux pa e p�rdorur
    programin bootloader prej diskut t� fort�. Kjo �sht� shum� e p�rdorueshme n�se ju nuk d�shironi t� instaloni
    LILO (apo grub) n� sistemin tuaj, apo nj� sistem� tjet�r eksploatimi q� do ta zhduk LILO, n�se ai nuk funksionon me konfigurimin tuaj hardware. Nj� 
    disket� boot mund t� p�rdoret njashtu edhe me
    imazh� shp�tues t� Mandrake, e cila mund�son njashtu edhe rikuperimin dhe shp�timin m� t� sigurt t� sistemit tuaj, n�se ai �sht� i d�mtuar. A d�shironi t� krijoni nj� disket� boot?
    %s

en: 
                          DrakBackup Daemon Report
sq: 
                          Raporti Regjistrues DrakBackup

en: Latvian
sq: Latvien

en: monthly
sq: gjdo muaj�

en: Module name
sq: Emri i Modulit

en: Start at boot
sq: Nise n� nisje t� sistemit

en: Use Incremental Backups
sq: P�rdori Regjistrimet nj�ri pas tjetrit

en: First sector of drive (MBR)
sq: Sektori i par i diskut (MBR)

en: El Salvador
sq: El Salvator

en: Use Unicode by default
sq: P�rdore Unikodin me marr�veshje

en: the module of the GNU/Linux kernel that handles the device
sq: moduli i b�rtham�s GNU/Linux i cili qeveris� k�t� periferik

en: Trying to rescue partition table
sq: Tentim i leximit t� organizimit t� ndarjeve

en: Option %s must be an integer number!
sq: Opcioni %s duhet t� jet� nj� num�r i plot�!

en: Use password to authenticate users
sq: P�rdore parull�n p�r ti v�rtetuar p�rdoruesit

en: Entries you'll have to fill:
    %s
sq: Hyrjet t� cilat duhet t� plot�sohen:
    %s

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
sq: P�r backup-et n� burimet tjera, skedaret jan� ende t� krijuara n� diskun e fort HD, mbasandej kaloni n� nj� burim tjet�r. Aft�simi i k�tij opcioni do t� zhduk nga disku i fort t� gjitha skedaret tar mbas backup-it.

en: Unable to start live upgrade !!!
sq: E pa mundur nisja e ngritjes s� postit !!!

en: Name:
sq: Emri:

en: 16 million colors (24 bits)
sq: 16 milion ngjyra (24 bits)

en: Allow all users
sq: Autorizoi t� gjith� p�rdoruesit

en: The official MandrakeSoft Store
sq: MandrakeStore: shitorja oficiale n� linj�

en: Resizing
sq: Ridimenzionimi

en: Enter the maximum size
     allowed for Drakbackup (MB)
sq: Futni madh�sin� maksimale
     t� lejuar p�r Drakbackup (Mb)

en: Cable connection
sq: Lidhja kab�ll

en: User
sq: P�rdorues

en: Do new backup before restore (only for incremental backups.)
sq: B�je nj� regjistrim t� ri para riparimit (vet�m p�r regjistrime vijuese nj� nga nj�)

en: Name
sq: Emri

en: mkraid failed
sq: mkraid d�shtoi

en: Button 3 Emulation
sq: Imitues Kopse 3

en: Check additions/removals of sgid files
sq: Verifikoji mbledhjet/e zhdukura t� skedareve sgid

en: Sending files...
sq: D�rgimi i skedareve...

en: Israeli (Phonetic)
sq: Izraelisht (fonetik)

en: access to rpm tools
sq: hyrjet n� veglat rpm

en: You must choose/enter a printer/device!
sq: Ju duhet ta zgjedhni/futni nj� stampues/mjet!

en: Permission problem accessing CD.
sq: Nuk keni t� drejt� t� hyni n� CD.

en: Phone number
sq: Numri i telefonit

en: Error: The "%s" driver for your sound card is unlisted
sq: Gabim: Piloti "%s" i kartel�s tuaj t� z�rit, nuk gjindet n� list�

en: Printer name, description, location
sq: Emri i stampuesit, p�rshkrimi, lokaliteti

en: USA (broadcast)
sq: SHBA (transmetim)

en: Use Xinerama extension
sq: P�rdore �faqjesin n� m� shum� ekrane (Xinerama)

en: West Europe
sq: Evropa P�rendimore

en: On CD-R
sq: n� CDROM

en: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - print this help message.
      --report          - program should be one of mandrake tools
      --incident        - program should be one of mandrake tools
sq: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - �faqe k�t� lajm� ndihmues.
      --report          - ky program duhet t� jet� nj� nga veglat mandrake
      --incident        - ky program duhet t� jet� nj� nga veglat mandrake

en: Harddrake2 version %s
sq: Harddrake2 versioni %s

en: Preferences
sq: P�lqimet

en: Swaziland
sq: Svazilandit

en: Dominican Republic
sq: Republika Domenikane

en: Copying %s
sq: Kopjimi i %s

en: Choose color
sq: Zgjedhe ngjyr�n

en: Syriac
sq: Siriak

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on this partition
    will be lost and will not be recoverable!
sq: Zgjedheni diskun e fort (hard drive) q� d�shironi ta zhdukni, p�r t�
    instaluar nj� ndarje t� re Mandrake Linux. Keni kujdes, t� gjitha t� dh�nat
    do t� zhduken, dhe nuk mund t� rekuperohen!

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Use the %c and %c keys for selecting which entry is highlighted.
sq: P�rdorni �elsat %c dhe %c p�r t� caktuar hyrjet tuaja zgjedh�se

en: Enable "%s" to execute the file
sq: Mund�soje "%s" ekzekutimin e skedares

en: Generic 2 Button Mouse
sq: Mini satandard me 2 Kopsa

en: Remove the logical volumes first
sq: Zhdukni m� s� pari volumet logjike

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: The highlighted entry will be booted automatically in %d seconds.
sq: Nisje automatike n� %d sekonda.

en: Can't write /etc/sysconfig/bootsplash
    File not found.
sq: Nuk mund t� shruhet n� /etc/sysconfig/bootsplash
    Skedarja nuk gjindet.

en: Internet access
sq: Hyrjet n� internet

en: y coordinate of text box
    in number of characters
sq: koordinatat n� y, t� zon�s s� tekstit
    n� numrat e karakter�ve

en: To get a list of the options available for the current printer click on the "Print option list" button.
sq: P�r ta p�rfituar list�n e parametrave n� disponibilitet p�r stampuesin e tanish�m, klikoni mbi kops�n "Shtype list�n e opcionit".

en: Enabling servers...
sq: Aktivizimi i Server�ve...

en: Printing test page(s)...
sq: Stampimi i faqes(ve) test...

en: There is already a partition with mount point %s
sq: Pika montuese %s �sht� n� p�rdorim e sip�r

en: Enable/Disable msec hourly security check.
sq: Aktivizoje/Blokoje verifikim siguris� n� gjdo or�.

en: At this point, you need to decide where you want to install the Mandrake
    Linux operating system on your hard drive. If your hard drive is empty or
    if an existing operating system is using all the available space you will
    have to partition the drive. Basically, partitioning a hard drive consists
    of logically dividing it to create the space needed to install your new
    Mandrake Linux system.
    
    Because the process of partitioning a hard drive is usually irreversible
    and can lead to lost data if there is an existing operating system already
    installed on the drive, partitioning can be intimidating and stressful if
    you are an inexperienced user. Fortunately, DrakX includes a wizard which
    simplifies this process. Before continuing with this step, read through the
    rest of this section and above all, take your time.
    
    Depending on your hard drive configuration, several options are available:
    
     * "%s": this option will perform an automatic partitioning of your blank
    drive(s). If you use this option there will be no further prompts.
    
     * "%s": the wizard has detected one or more existing Linux partitions on
    your hard drive. If you want to use them, choose this option. You will then
    be asked to choose the mount points associated with each of the partitions.
    The legacy mount points are selected by default, and for the most part it's
    a good idea to keep them.
    
     * "%s": if Microsoft Windows is installed on your hard drive and takes
    all the space available on it, you will have to create free space for
    Linux. To do so, you can delete your Microsoft Windows partition and data
    (see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT
    partition. Resizing can be performed without the loss of any data, provided
    you have previously defragmented the Windows partition and that it uses the
    FAT format. Backing up your data is strongly recommended.. Using this
    option is recommended if you want to use both Mandrake Linux and Microsoft
    Windows on the same computer.
    
       Before choosing this option, please understand that after this
    procedure, the size of your Microsoft Windows partition will be smaller
    then when you started. You will have less free space under Microsoft
    Windows to store your data or to install new software.
    
     * "%s": if you want to delete all data and all partitions present on
    your hard drive and replace them with your new Mandrake Linux system,
    choose this option. Be careful, because you will not be able to undo your
    choice after you confirm.
    
       !! If you choose this option, all data on your disk will be deleted. !!
    
     * "%s": this will simply erase everything on the drive and begin fresh,
    partitioning everything from scratch. All data on your disk will be lost.
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "%s": choose this option if you want to manually partition your hard
    drive. Be careful -- it is a powerful but dangerous choice and you can very
    easily lose all your data. That's why this option is really only
    recommended if you have done something like this before and have some
    experience. For more instructions on how to use the DiskDrake utility,
    refer to the ``Managing Your Partitions '' section in the ``Starter
    Guide''.
sq: Kjo etap� do t� ju mund�soj q� t� p�rcaktoni me precizitet vendosjen dhe
    instalimin e Mandrake Linux. N�se disku i juaj i fort� �sht� zbraz�t apo i
    p�rdorur nga nj� sistem tjet�r eksploatimi, ju duhet ta shp�rndani
    diskun tuaj n� pjes�. Ndarje e diskut d.m.th. ta shp�rndani me precizitet
    q� m� fund t� krijoni nj� hap�sire p�r instalimin e sistemit Mandrake Linux.
    
    Duke njoftur efektet e proceseve t� ndarjeve nuk jan� kthyese, (p�rmbajtjet
    n� disk do t� zhduken), ndarja n� shumic�n e rasteve �sht� stresante dhe
    frik�suese, p�r nj� p�rdorues t� pa eksperimentuar. P�r fat t� mir� nj�
    interfac DrakX, �sht� caktuar p�r ta. Para se ta nisni, konsultone
    doracakun tuaj, dhe keni durim.
    
    N�se ndarjet nuk jan� p�rcaktuar, ju duhet ti krijoni duke p�rdorur
    asistentin. Simbas konfigurimit t� diskut tuaj, nj� shumic� e opcioneve
    jan� n� disponibilitet :
    
     * "%s": kjo mund�si do t� provoj t� shp�rndaj� automatikisht
    hap�sir�n e pa p�rdorur t� diskut tuaj. Nuk do t� keni pyetje tjera.
    
     * "%s": asistenti ka zbuluar nj� apo m� shum� ndarje ekzistuese
    n� diskun tuaj. N�se ju d�shironi ti p�rdorni, zgjedheni k�t� opcion.
    Mandej ju do t� pyet�ni p�r zgjedhjen pik�s montuese e cila do t� lidhet
    me ndarjet tjera. Pika trasheguese e montimit �sht� e p�rcaktuar me
    marr�veshje dhe n� shumic�n e rasteve �sht� preferohet q� mos ta
    ndryshoni at�.
    
     * "%s": n�se Microsft Windows �sht� instaluar n� diskun tuaj dhe
    e p�rfshin� t�r� sip�rfaqen e diskut, ju duhet t� krijoni nj� vend p�r
    instalimin e t� dh�nave Linux. P�r ta realizuar, ju mund ta shlyeni
    t�r� diskun (shiqo n� zgjidhjen ``Shlyeje t�r� diskun'') ose ridimenzi-
    onone hap�sir�n e p�rdorur nga ndarja Windows n� form� FAT.
    Ridimenzionimi mund t� b�het pa i humbur t� dh�nat n� disk, me nj�
    kusht, n�se ju e keni defragmentuar diskun tuaj n� Windows. Nj� regjistrim
    i t� dh�nave tuaja �sht� shum� e preferuar. Kjo mund�si, d.m.th.
    e dyta mund t� p�rdoret pa humbjen e t� dh�nave. Kjo zgjidhje �sht�
    tejet e rekomanduar, p�r bashk�jetes�n e Linux-it dhe Windows-it n� t�
    nj�jtin kompjuter.
    
       Para se ta zgjidhni k�t� mund�si, ju duhet t� kuptoni se mbas
    k�saj precedure hap�sira e Windows do t� jet� zvog�luar. D.m.th.
    Disku juaj n� Windows do t� posedoj m� pak� hap�sir� t� lir� p�r
    instalimin e programeve apo regjistrimin e t� dh�nave me Windows.
    
     * "%s": n�se ju d�shironi ti zhdukni t� gjitha
    t� dh�nat dhe aplikacionet e instaluara n� sistemin tuaj, dhe ti
    z�vend�soni me nj� sistem t� ri Mandrake Linux, zgjedheni k�t� mund�si.
    Keni kujdes, sepse kjo mund�si �sht� e pa kthyeshme mbrapa. �sht� e pa
    mundur t� gjindet t� dh�nat e zhdukura.
    
       !! Duke zgjedhur k�t� mund�si, p�rmbajtjet n� diskun tuaj do t�
    zhduken. !!
    
     * "%s": kjo zgjidhje do t� zhduk� t�r� p�rmbajtjen
    e diskut, dhe do t� rifilloj nga zerroja. T� gjitha t� dh�nat dhe
    programet prezente n� diskun tuaj do t� zhduken.
    
       !! Duke zgjedhur k�t� mund�si, p�rmbajtjet n� diskun tuaj do t�
    zhduken. !!
    
     * "%s": mund�son nj� ndarje manuale t� diskut tuaj. Kini kujdes
    -- �sht� tejet e fuqishme por edhe aq e rrezikshme kjo mund�si.
    Ju mund t� zhdukni p�rmbajtjen e t�r�sishme t� diskut tuaj. D.m.th.
    Ju nuk duhet ta zgjidhni k�t� mund�si, n�se nuk dini se �far� b�ni.
    P�r t� ditur m� shum� mbi DiskDrake, p�rcaktohuni n� sekcionin
    ``Qeverisja e Ndarjeve Tuaja'' n� `` P�rcjell�sin Nis�s''

en: Ukraine
sq: Ukrainase

en: Application:
sq: Aplikacioni:

en: External ISDN modem
sq: Modemi i jasht�m ISDN

en: if set to yes, report check result by mail.
sq: n�se konfigurohet me po, verifikoje rezultatin e raportit nga e-maili.

en: Your choice? (default %s)
sq: Zgjedhja e juaj? (%s me marr�veshje)

en: Trouble shooting
sq: Telashe gjat� ndaljes

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
sq: Faqja e testit �sht� d�rguar n� stampues.
    K�saj etape i nevojiten disa minuta para se t� filloj stampimi i faqes.
    Statuti i stampimit:
    %s

en: daily
sq: gjdo dit�

en: and one unknown printer
sq: dhe nj� stampues i pa njoftur

en: Ireland
sq: Irlanda

en:          Restore Configuration
sq:          Riparimi i Konfigurimit

en: Is this the correct setting?
sq: A �sht� ky nj� rregullim korrekt?

en: You will now set up your Internet/network connection. If you wish to
    connect your computer to the Internet or to a local network, click "%s".
    Mandrake Linux will attempt to autodetect network devices and modems. If
    this detection fails, uncheck the "%s" box. You may also choose not to
    configure the network, or to do it later, in which case clicking the "%s"
    button will take you to the next step.
    
    When configuring your network, the available connections options are:
    traditional modem, ISDN modem, ADSL connection, cable modem, and finally a
    simple LAN connection (Ethernet).
    
    We will not detail each configuration option - just make sure that you have
    all the parameters, such as IP address, default gateway, DNS servers, etc.
    from your Internet Service Provider or system administrator.
    
    You can consult the ``Starter Guide'' chapter about Internet connections
    for details about the configuration, or simply wait until your system is
    installed and use the program described there to configure your connection.
sq: N�se ju d�shironi ta rregulloni sistemin tuaj Internet/network, klikoni mbi
    "%s". Autozbuluesi i periferikve t� rrjetit dhe i modemeve do t� niset
    menj�her. N�se ky zbulim d�shton, sh�noni mbi kutin�, "%s".
    Ju mund t� zgjedhni njashtu q� t� mos konfigurohet rrjeti, ose ta b�ni m�
    von�. N� k�t� rast, klikoni thjesht mbi kops�n "%s".
    
    Kur ju e konfiguroni rrjetin tuaj (network) lidhjet e radhituar jan� n�
    disponibilitet: modem telefonik, modem ISDN, lidhja ADSL,
    modem me kablo ose thjesht me LAN (rrjeti Ethernet).
    
    Ne nuk do ti shpjegojm� t� gjitha konfigurimet e mund�shme n� detaje.
    Ju duhet ta dini q� i posedoni t� gjitha t� dh�nat mbi furnizuesin tuaj
    nga Servisi i Internetit Provider ose nga sistemi administrues, si p.sh
    adresa IP, gateway me marr�veshje, server� DNS etj.
    
    Ju mund ta konsultoni kapitullin ``Doracaku Nis�s'' me p�rmbajtje
    t� lidhjeve n� Internet, p�r m� shum� detaje n� lidhje me konfigurimet
    p�rkat�se t� �do tipi lidh�s. Ju keni mund�si, njashtu ta konfiguroni
    lidhjen tuaj Internet, mbasi q� instalimi t� p�rfundoj.

en: Wizard Configuration
sq: Konfigurimi me Asistent

en: Autoprobe
sq: Zbulim automatik

en: if set to yes, check for :
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
sq: n�se konfigurohet me po, verifikoi :
    
    - parullat e zbrazta,
    
    - asnj� parull� n� /etc/shadow
    
    - p�r p�rdoruesit me id 0 jan� t� ndrysh�m me root.

en: Backup system files...
sq: Regjistrimi i sistemit t� skedareve...

en: Can't use broadcast with no NIS domain
sq: Nuk mund t� p�rdoret mund�sia broadcast pa asnj� pron� NIS

en: Removing printer "%s"...
sq: Zhdukja e stampuesit "%s"...

en: Shell history size
sq: Shell madh�sia e historis�

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
sq: Ju jutemi d�shmoni lokalizimin e skedares auto_install.cfg.
    
    Lereni t� bardh� n�se nuk d�shironi nj� mod instalues autonatik.

en: Configured on other machines
sq: Konfigurim n� makina tjera

en: information level that can be obtained through the cpuid instruction
sq: nivel i informacionit, q� mund t� p�rfitohet n�p�r p�rshkrimet e cpuid

en:  on device: %s
sq:  n� mjetin: %s

en: Remove Windows(TM)
sq: Zhduke Windows(TM)

en: Starts the X Font Server (this is mandatory for XFree to run).
sq: Nise serverin X t� Polisave (�sht� e nevojshme q� XFree t� niset).

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
sq: Shumica e k�tyre vlerave jan� nxjerrur
    nga sistemi nis�s.
    Ju mund ti ndyshoni si t� d�shironi.

en: Select the font file or directory and click on 'Add'
sq: Zgjedhni skedaret apo repertor�t e polisave dhe klikoni mbi 'Shto'

en: Madagascar
sq: Madagaskari

en: Cron not available yet as non-root
sq: Cron nuk �sht� i lir� p�r momentin jasht� administratorit (root).

en: System
sq: Sistemi

en: Do you want to use this feature?
sq: A d�shironi ta p�rdorni k�t� ve�ori?

en: Arabic
sq: Arabe

en: 
    - Options:
sq: 
    - Opcionet:

en: Password required
sq: Parulla nevojitet

en: %d minutes
sq: %d minuta

en: Graphics card: %s
sq: Kartel� grafike: %s

en: WebDAV transfer failed!
sq: Transeferimi WebDAV d�shtoi

en: XFree configuration
sq: Konfigurimi i XFree

en: Choose action
sq: Zgjedhe akcionin

en: French Polynesia
sq: Polinezia Franqeze

en: Usually, DrakX has no problems detecting the number of buttons on your
    mouse. If it does, it assumes you have a two-button mouse and will
    configure it for third-button emulation. The third-button mouse button of a
    two-button mouse can be ``pressed'' by simultaneously clicking the left and
    right mouse buttons. DrakX will automatically know whether your mouse uses
    a PS/2, serial or USB interface.
    
    If for some reason you wish to specify a different type of mouse, select it
    from the list provided.
    
    If you choose a mouse other than the default, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct and that the mouse is working correctly. If the mouse is not
    working well, press the space bar or [Return] key to cancel the test and to
    go back to the list of choices.
    
    Wheel mice are occasionally not detected automatically, so you will need to
    select your mouse from a list. Be sure to select the one corresponding to
    the port that your mouse is attached to. After selecting a mouse and
    pressing the "%s" button, a mouse image is displayed on-screen. Scroll
    the mouse wheel to ensure that it is activated correctly. Once you see the
    on-screen scroll wheel moving as you scroll your mouse wheel, test the
    buttons and check that the mouse pointer moves on-screen as you move your
    mouse.
sq: DrakX normalisht nuk has� n� ndonji problem� n� zbulimin e sasis� s�
    kopsave t� minit tuaj. N�se nuk i merr� me njohuri, se ju posedoni
    nj� min� me dy kopsa, ai do ta konfiguroj nj� kops� t� tret� imituese.
    Kopsa e tret� e minit me dy kopsa, mund t� ``shtypet'' duke klikuar
    nj�koh�sisht mbi kops�n e majt� apo t� djatht�. Njashtu
    DrakX do ta dij� automatikisht� se �far� mini posedoni PS/2 apo USB.
    
    N�se ju d�shironi t� instaloni nj� tjet�r tip mini, zgjedheni nj�rin nga
    lista e sh�nuar.
    
    N�se ju e zgjedhni nj� tjet�r min, q� �sht� propozuar me
    marr�veshje, DrakX do t� ju prezentoj nj� ekran testi. P�rdorni
    kopsat dhe rrot�n p�r tu siguruar se �do gj� fuksionon si duhet.
    N�se mini juaj nuk funksionon si duhet, shtypni mbi shufr�n p�r hap�sir�
    (space bar) apo n� [Return] p�r ta anuluar testimin dhe kthehuni mbrapa
    n� list�n e zgjedhjeve.
    
    N� disa raste minj�t me rrot� nuk jan� t� zbuluar automatikisht. Ju duhet
    ta zgjedhni manuelisht, nga lista e propozuar. Sigurohuni se keni zgjedhur
    port�n e sakt� t� kyqur n� minin tuaj. Mbasi q� ju e zgjedhni minin tuaj
    shtypni mbi kops�n "%s", nj� imazh� i minit do t� paraqitet
    n� ekran�. Dhe mandej ju duhet ta l�vizni rrot�n e minit tuaj p�r t'
    aktivizuar at� sakt�sisht. Dhe testoni t� gjitha kopsat dhe l�vizjet e
    tyre, a jan� t� sakta.

en: Support the OKI 4w and compatible winprinters.
sq: P�rkrahja e stampuesve winprinters OKI 4w �sht� e pajtueshme.

en: Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up.
sq: Skedaret apo kartelat e egra jan� listuar n� .backupignore skedarja n� maj� t� repertorit deg�zor nuk do t� regjistrohet.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
sq: Ngarkoje sistemin e z�rit ALSA (Advanced Linux Sound Architecture)

note: -PO: the first %s is the card type (scsi, network, sound,...) -PO: the second is the vendor+model name
en: Installing driver for %s card %s
sq: Intalimi i pilotit p�r kartel�n %s %s

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
sq: Ju e keni trasferuar stampuesin tuaj t� m� par�m me marr�veshje ("%s"). A duhet t� jet� njashtu edhe stampues me marr�veshje, ky sistem i ri stampimi %s?

en: Enable Server
sq: Aktivizoje Serverin

en: Ukrainian
sq: Ukrahin�s

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
sq: Hyrja n� rrjet nuk �sht� n� nisje dhe nuk mund t� niset. Ju lutemi verifikojeni konfigurimin dhe materialin tuaj. Mandej provoni t� konfiguroni stampuesin tuaj edhe nj� her� me ndihm�n e Qendr�s Kontrolluese Mandrake.

en: Enable "%s" to write the file
sq: Mund�soje "%s" shkruarjen n� skedare

en: Please insert the Boot floppy used in drive %s
sq: Ju lutemi futni disket�n me nisje t� udh�zuar (Boot floppy) q� p�rdoret n� lexuesin %s

en: Local network(s)
sq: Rrjet(et) Lokal(e)

en: Remove Windows
sq: Zhduke Windows

en: Your %s has been configured.
    You may now scan documents using "XSane" from Multimedia/Graphics in the applications menu.
sq: Skaneri juaj %s �sht� konfiguruar.
    Ju keni mund�si t� skanoni dokumente duke p�rdorur "XSane" nga Multimedia/ Graphik n� menyt� e aplikacioneve.

en: Firewire controllers
sq: Kontrolluesit Firewire

en: After you have configured the general bootloader parameters, the list of
    boot options that will be available at boot time will be displayed.
    
    If there are other operating systems installed on your machine they will
    automatically be added to the boot menu. You can fine-tune the existing
    options by clicking "%s" to create a new entry; selecting an entry and
    clicking "%s" or "%s" to modify or remove it. "%s" validates your
    changes.
    
    You may also not want to give access to these other operating systems to
    anyone who goes to the console and reboots the machine. You can delete the
    corresponding entries for the operating systems to remove them from the
    bootloader menu, but you will need a boot disk in order to boot those other
    operating systems!
sq: Mbasi q� ti konfiguroni parametrat e p�rgjithsh�m t� nisjes me udh�zim,
    lista e opcioneve boot, do t� jet� n� disponibilitet n� nisjen e sistemit.
    
    N�se aty gjindet ndonji sistem tjet�r eksploatues, ai do t� shtohet
    automatikisht n� menyn� e nisjes boot. Ju mund ta kthjelloni k�t� konfigurimin
    duke shtypur mbi "%s" p�r t� krijuar nj� hyrje t� re; zgjedhja e nj�
    hyrje dhe mund�sia e klikimit mbi "%s" apo "%s" p�r ta ndryshuar
    apo zhdukur at�. Mund�sia "%s" vler�son ndryshimet tuaja.
    
    �sht� e mundur q� ju ti kufizoni hyrjet n� k�t� sistem eksploatues.
    Ju keni mund�si t� zhdukni hyrjet p�rkat�se t� sistemit eksploatues ti zhdukni
    nga menyja bootloader, mir�po ju do t� keni nevoj� p�r nj� diskete boot
    p�r ti nisur k�to sisteme tjera!

en: System mode
sq: Mod� i sistemit

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
sq: Q� t� keni mund�sin p�r ta p�rdorur nj� stampues t� lidhur n� nj� server Netware, ju duhet m� se paku ta p�rcaktoni emrin e tij (i cili mund t� jet� i i ndrysh�m me emrin ftues TCP/IP) dhe me emrin e rreshtit stampues n� t� cilin ju keni mund�si t� hyni vet�m nj� em�r t� p�rdoruesit (login) dhe nj� parull�.

en: Netmask:
sq: Maskimi-i-Rrjetit:

en: Do it later
sq: B�je m� von�

en: Append
sq: Mund�si kalimi n� b�rtham�

en: Refresh printer list (to display all available remote CUPS printers)
sq: Rifreskoje list�n e stampuesve (p�r t� �faqur� t� gjith� stampuesit e larg�t CUPS)

en: When this option is turned on, on every startup of CUPS it is automatically made sure that
    
    - if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
    
    - if /etc/cups/cupsd.conf is missing, it will be created
    
    - when printer information is broadcasted, it does not contain "localhost" as the server name.
    
    If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points.
sq: Kur kjo mund�si �sht� e nisur, n� secil�n nisje t� CUPS automatikisht sigurohet se
    
    - n�se LPD/LPRng �st� i instaluar n�, /etc/printcap nuk do t� z�vend�sohet nga CUPS
    
    - n�se /etc/cups/cupsd.conf mungon, ai do t� krijohet
    
    - n�se informacionet e stapuesit transferohen, ato nuk p�rmbajn� "localhost" si nj� server emri.
    
    N�se nj� nga k�to matje ngarkojn� ndonji problem p�r ju, shk�puteni k�t� mund�si, dhe keni kujdes n� k�to pika punuese.

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
sq: Auto instalimi mund t� b�het me instalim t� automatizuar, n�se
    d�shironi, ai do t� mer� kontrolin mbi diskun tuaj t� fort!!
    (�sht� i p�rcaktuar p�r instalimin njodnj� makine tjet�r).
    
    A d�shironi ta p�rs�ritni instalimin.

en: Network printer "%s", port %s
sq: Stampues rrjeti "%s", porta %s

en: Please choose what network adapter will be connected to your Local Area Network.
sq: Ju lutemi zgjedhni se cili p�rshtat�s i rrjetit, do t� lidhet n� Zon�n e Rrjetit Lokal.

en: OK to restore the other files.
sq: OK p�r t� riparuar skedaret tjera.

en: Please choose your keyboard layout.
sq: Ju lutemi zgjedheni tipin tastier�s suaj

en: Printer Device URI
sq: Adresa e rrjetit t� mjetit stampues

en: Not erasable media!
sq: Burimi nuk ka p�rkrahje zhduk�se!

en: Terminal-based
sq: Doracak nga terminali

en: Enable/Disable IP spoofing protection.
sq: Aktivizoje/Blokoje mbrojtjen nga talljet IP.

en: Installing a printing system in the %s security level
sq: Instalimi i sistemit stampues nd�r nivelin e siguris� %s

en: The user name is too long
sq: Emri i p�rdoruesit �sht� shum� i gjat�

en: Other OS (windows...)
sq: Sistem tjet�r Eksploatues (windows, etj.)

en: WebDAV remote site already in sync!
sq: Siti i larg�t WebDAV �sht� ve�se i sinkronizuar!

en: Reading printer database...
sq: Laximi i baz�s s� t� dh�nave p�r stampues...

en: Generate auto install floppy
sq: Krijo nj� disket� auto instaluese

en: 		 user name: %s
    		 on path: %s
sq: 		 emri i p�rdoruesit: %s
    		 n� shtegun: %s

en: No open source driver
sq: Asnj� burim i hapur p�r pilotin

en: Def.
sq: P�rcaktim

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
sq: Ky sistem i siguris� �sht� i bazuar me t� m�parmin, mir�po sistemi tani �sht� kompletisht i mbyllur nga rrjeti, siguria �sht� n� maksimum

en: Nicaragua
sq: Nikaragua

en: New Caledonia
sq: Kaledonia e Re

en: European protocol (EDSS1)
sq: Protokol evrope (EDSS1)

en: /_Delete
sq: /_Zhduke

en: Video mode
sq: Mod� video

en: Oman
sq: Omani

en: Please enter your email address below
sq: Ju lutemi futni adres�n tuaj e-mail k�tu

en: Network Monitoring
sq: V�shtrimi i Rrjetit (Network)

en: New size in MB:
sq: Madh�si e re n� MB:

en: Partition table type: %s
sq: Tabel� e ndarjeve t� tipit: %s

en: Authentication Windows Domain
sq: V�rtet�simi i Pron�s Windows

en: US keyboard
sq: tastier� e SHBA-�s

en: Buttons emulation
sq: Imitues i Kopsave

en: , network printer "%s", port %s
sq: , stampues rrjeti "%s", porta %s

en: 
    Drakbackup activities via tape:
sq: 
    aktivitet Drakbackup mes kaset�s:

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
sq: 
     Problem gjat� lidhjes mes FTP: i pa mundur d�rgimi i skedareve t� regjistruara me FTP.

en: Sending Speed:
sq: Shpejt�sia D�rguese:

en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card uses
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
sq: Nj� bug klasik me tingull testues i cili nis� urdh�rat vijues:
    
    
    - "lspcidrake -v | fgrep AUDIO" do t� ju tregoj se cili pilot p�rdore kartel�n tuaj me marr�veshje
    
    - "grep sound-slot /etc/modules.conf" do t� ju tregoj se cili pilot p�rdoret aktualisht
    
    - "/sbin/lsmod" do t� ju mud�soj verifikimin e modulit se a �sht� piloti 
    i ngarkuar apo jo
    
    - "/sbin/chkconfig --list sound" dhe "/sbin/chkconfig --list alsa" do t� tregoj n�se kartela e z�rit dhe serviset alsa jan� konfiguruar q� t� nisen
    n� initlevel 3
    
    - "aumix -q" do t� ju tregoj n�se z�ri mund t� heshtohet apo jo
    
    - "/sbin/fuser -v /dev/dsp" do t� ju tregoj se cili program �sht� duke p�rdorur kartel�n e z�rit.

en: Halt bug
sq: Ndale bug(in)

en: Mail alert configuration
sq: Konfigurimi i lajmit alarmues

en: Matching
sq: P�rputhja

en: Bosnian
sq: Boshjake

en: Release:
sq: Liroje:

en: Connection speed
sq: Shpejt�sia e lidhjes

en: Database Server
sq: Server i baz�s s� t� dh�nave

en: special capacities of the driver (burning ability and or DVD support)
sq: kapaciteti special i pilotit (mund�sia e gdhendjes dhe p�rkrahja e DVD)

en: Can't add a partition to _formatted_ RAID md%d
sq: Nuk mund t� shtoj nj� ndarje n� _formatimin_ RAID md%d

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
sq: Kartela juaj mund t� ket� p�rkrahje t� materialit nxitues 3D mir�po vet�m me XFree %s, SH�NIM KJO �SHT� P�RKRAHJE EKSPERIMENTALE DHE MUND TA BLOKOJ
    KOMPJUTERIN TUAJ.
    Kartela juaj ka p�krahje me XFree %s e cila mund t� ket� p�rkrahje me t� mir� n� 2D.

en: Please wait, setting security options...
sq: Nj� moment ju lutemi, konfigurimi i mund�sive t� siguris�...

en: Unknown|CPH05X (bt878) [many vendors]
sq: I pa njoftur|CPH05X (bt878) [shum� shit�s]

en: Launch the graphical environment when your system starts
sq: Nise interfacin e mjedisit me grafik kur niset sistemi juaj

en: hourly
sq: gjdo or�

en: Right Shift key
sq: �el�si Shift Djathtas

en:           Successfuly Restored on %s
sq:           Riparim i Suksessh�m n� %s

en: Making printer port available for CUPS...
sq: Krijimi i nj� porte t� lir� p�r stampues CUPS...

en: Antigua and Barbuda
sq: Antigua dhe Barbuda

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
sq: !!! Indikacionet e parull�s n� sistemin t� t� dh�nave �sht�
    i ndysh�m me at� t� Terminalit t� Serverit n� baz�n e t� dh�nave.
    Zhduke/ri-shtoje nj� p�rdorues n� nj� Server Terminali me lidhje t� lir�.

en: Spanish
sq: Spanjollisht

en: Start
sq: Nise

en: Direct root login
sq: Lidhje administratori direkt

en: Configuring applications...
sq: Konfigurimi i aplikacioneve...

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
sq: 
    Mir�sevini n� Asistentin p�r Konfigurimin e Stampuesit
    
    Ky asistent do t� ju ndihmoj� q� ta instaloni stampuesin(t) tuaj t� kyqur n� k�t� kompjuter, n� rrjet, apo n� nj� kompjuter tjet�r Windows t� larg�t.
    
    N�se i keni lidhur stampuesit n� k�t� kompjuter, nisni ata n� k�t� kompjuter, q� m� n� fund ata t� zbulohen automatikisht. Njashtu stampues(it) e rrejtit dhe ata n� Windows duhet t� jen� t� lidhur, dhe t� ndezur.
    
    Sh�nim se auto-zbuluesit e stampuesve n� rrjet apo Windows, i nevojitet koh� m� e gjat�, se sa tek ata lokal, pra ju mund ti dezaktivizoni n�se ju nuk keni nevoj� p�r ta.
    
    Klikoni mbi "Tjetri" kur ju jeni gati, dhe mbi "Anulo" n�se ju, nuk d�shironi ta konfiguroni stampuesin(t).

en: Normal modem connection
sq: Lidhje normale me modem

en: File Selection
sq: Zgjedhja e Skedareve

en: Erase tape before backup
sq: Shlyeje kaset�n para backup

en: Run config tool
sq: Nise vegl�n p�r konfigurim

en: Bootloader installation
sq: Instalimi i Bootloader

en: Root partition size in MB:
sq: Madh�sia e ndarjes rr�nj�zore n� MB:

en: This is a mandatory package, it can't be unselected
sq: Kjo �sht� nj� pako e nevojshme, dhe nuk mund �zgjedhet

en: Etherboot ISO image is %s
sq: Imazhi ISO Etherboot �sht� %s

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
sq: Emri (BIND) �sht� nj� Em�r Prone Server (DNS) i cili p�doret p�r zgjedhjen e ftuesit t� emruar n� adres�n IP.

en: Saint Lucia
sq: Luqia e Shenj�t

en: November
sq: n�ntor

en: Disconnect...
sq: Shk�pute...

en: Report
sq: Raporti

en: level
sq: niveli

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
sq: T� gjitha aksidentet do t� p�rcillen me nj� kualifikim t� vet�m teknik t� MandrakeSoft expert.

en: Package Group Selection
sq: Zgjedhni Grupet e Pakove

en: Allow local hardware
    configuration.
sq: Mund�son konfigurimin e nj�
    mjeti lokal.

en: Restore Via Network Protocol: %s
sq: Riparoje Via me Protokol t� Rrjetit: %s

en: You can configure each parameter of the module here.
sq: Ju mund ta konfiguroni k�tu secilin paramet�r t� modulit.

en: Choose the resolution and the color depth
sq: Zgjedhe vendosm�rin dhe thell�sin e numrit t� ngjyrave

en: Emulate third button?
sq: Imitoje kopsin e tret�?

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
sq: Ju nuk mund ta krijoni nj� ndarje t� re
    (prej se keni arritur n� numrin maksimal t� ndarjeve primare).
    N� fillim zhdukni ndarjen primare dhe krijone nj� ndarje t� shtrire.

en: Mount
sq: Monto

en: Creating auto install floppy
sq: Krijimi i nj� diskete auto instaluese

en: Install updates
sq: Instaloi azhurnimet

en: text box height
sq: lart�sia e zon�s s� tekstit

en: State
sq: Gjendje

en: Be sure a media is present for the device %s
sq: Duhet t� jeni i sigurt� se nj� burim, ekziston p�r mjetin %s

en: Enable multiple profiles
sq: Autorizimi i shumic�s s� profil�ve

en: Do not interpret character or block special devices on the file system.
sq: Mos i interpretoni karakteret apo bloqet speciale t� mjeteve n� sistemin e skedares.

en: These options can backup and restore all files in your /etc directory.
sq: K�to opcione mund ti regjistrojn� dhe rregullojn� t� gjitha skedaret n� repertorin tuaj /etc.

en: Local printer
sq: Stampues lokal

en: Files Restored...
sq: Skedare t� Riparuara...

en: Package selection
sq: Zgjedhja e pakos

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
sq: Num mund ta mbroj� konfigurimin e tanish�m, dhe paramendoni n�se ju e keni konfiguruar nj� server DHCP; n� k�t� rast ju duhet ta verifikoni n�se adres�n e rrjetit lokal e kam� lexuar si duhet; Un� nuk do ta rikonfiguroj at� dhe nuk do ta preki konfigurimin e serverit DHCP.
    
    DNS me hyrje t� marr�veshur �sht� grabit�s i Emrave t� Serverve t� konfiguruar me mur�-t�-zjarrt�. Ju mund ta z�vend�soni at� p.sh. me ISP DNS IP.
    		      
    Ose, un� mund ta ri-konfiguroj interfacin tuaj, dhe t� (ri)konfiguroj nj� server DHCP p�r ju.

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
sq: Asnj� stampues lokal s'�sht� gjetur! P�r ta instaluar n� m�nyr� manuele futni emrin e mjetit apo t� skedares mbi linj�n hyr�se (Portat paralele: /dev/lp0, /dev/lp1, ..., e nj�jt� me LPT1:, LPT2:, ..., stampuesin e 1-r� USB: /dev/usb/lp0,stampues 2-t� USB: /dev/usb/lp1, ...).

en: All primary partitions are used
sq: T� gjitha ndarjet primare jan� n� p�rdorim e sip�r

en: LPD server "%s", printer "%s"
sq: Serveri LPD "%s", stampuesi "%s"

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
sq: Mbasi t� p�rfundoni, ne ju rekomandojm� q� ta ri-nisni interfacin grafik X, q� ti largoheni problemeve n� ngarkimin e makin�s ftuese.

en: Automatic detection and configuration of hardware at boot.
sq: Konfigurim dhe zbulim automatik i materialit n� nisje t� sistemit.

en: Installation Server Configuration
sq: Konfigurimi i Serverit Instalues

en: Configuring IDE
sq: Konfigurimi i IDE

en: Network functionality not configured
sq: Funksionimet e rrjetit nuk jan� konfiguruar

en: Configure module
sq: Konfigurim i modulit

en: Cocos (Keeling) Islands
sq: Ishujt e Kokosit (Keeling)

en: You'll need to reboot before the modification can take place
sq: Ju duhet ta rinisni sistemin tuaj q� ndryshimet e b�ra, t� mund t� p�rdoren

en: Provider phone number
sq: Numri i telefonit t� furnizuesit

en: Host %s
sq: Ftuesi %s

en: Fiji
sq: Figji

en: Second floppy drive
sq: Lexuesi i dyt� floppy

en: About Harddrake
sq: N� lidhje me Harddrake

en: Authorize TCP connections to X Window
sq: Autorizoje lidhjen TCP n� Dritaren X

en: Drive capacity
sq: Kapaciteti i pilotit

en: Insert a floppy in drive
    All data on this floppy will be lost
sq: Futni nj� disket� n� lexues (floppy drive)
    T� gjitha t� dh�nat n� disket� do t� zhduken

en: Size: %s
sq: Madh�sia: %s

en: Control and Shift keys simultaneously
sq: �el�sat e nj�kohsh�m Control dhe Shift

en: secondary
sq: sekondar

en: View Backup Configuration.
sq: Shiqo n� Konfigurimin Regjistrues

en: if set to yes, report check result to syslog.
sq: n�se konfigurohet me po, verifikoje rezultatin e raportit syslog.

note: -PO: keep this short or else the buttons will not fit in the window
en: No password
sq: Asnj� parull�

en: %s: %s requires hostname...
sq: %s: %s emri i ftuesit t� d�shiruar...

en: There is no existing partition to use
sq: Asnj� ndarje egzistuese p�r ta p�rdorur

en: The following scanners
    
    %s
    are available on your system.
sq: Skaner�t e radhitur
    
    %s
    jan� lidhur direkt n� sistemin tuaj.

en: Multi-function device on parallel port #%s
sq: Periferik multi-funksionel n� port�n paralele #%s

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
sq: P�r t� stampuar n� nj� stampues TCP apo socket, ju duhet t� p�rcaktoni emrin e ftuesit t� stampuesit, dhe mundesisht� numrin e port�s. P�r server stampues HP JetDirect, numri i port�s �sht� zakonisht 9100, mir�po kjo mund t� jet� e ndryshme p�r server t� tjer�. Konsultone doracakun e stampuesit tuaj.

en: Hard drive information
sq: Informacion mbi diskun e fort (hard drive)

en: Russian
sq: Rusisht�

en: Jordan
sq: Jordania

en: Hide files
sq: Fshehi skedaret

en: Auto-detect printers connected to this machine
sq: Zbulo automatikisht stampuesit e lidhur n� k�t� makin�

en: XawTV isn't installed!
    
    
    If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134
    module in "/etc/modules") nor installed xawtv, please send the
    results of "lspcidrake -v -f" to "install\@mandrakesoft.com"
    with subject "undetected TV card".
    
    
    You can install it by typing "urpmi xawtv" as root, in a console.
sq: XawTV nuk �sht� i instaluar!
    
    
    N�se ju posedoni nj� kartel� TV dhe DrakX nuk e ka zbuluar at� (asnj� modul bttv dhe saa7134
    n� "/etc/modules") ose nuk e ka instaluar xawtv, ju lutemi d�rgoni
    rezultatet e "lspcidrake -v -f" n� "install\@mandrakesoft.com"
    me l�nd�n "undetected TV card".
    
    
    Ju mund ta instaloni at� duke shtypur "urpmi xawtv" si p�rdorues administrator (root), n� konsol�.

en: Sorry, no floppy drive available
sq: Kemi ndjes�, asnj� lexues i lir� p�r disket�n floopy

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
sq: Parametrizoni serverin tuaj Windows q� m� n� fund stampuesi t� jet� i lir� nd�r protokolin IPP, dhe rregullojeni stampimin nga kjo makin� me k�t� tip  "%s" lidh�s n� Printerdrake.

en: Bad package
sq: Pako jo e mir�

en: Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!
sq: Transformone makin�n tuaj n� server t� plot�fuqish�m Linux me disa klikime t� minit tuaj: Web server, mail, muri-i-zjarrt� (firewall), router, shp�rndarje t� skedareve dhe stampuesve, ...

en: DrakSec Basic Options
sq: Opcionet Baz� t� DrakSec

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
sq: 
    
    
    Sh�nim: n�se ju posedoni nj� kartel� ISA PnP, ju duhet ta p�rdorni programin sndconfig. Shtypni n� linj�n komanduese "sndconfig".

en: Romania
sq: Rumanis

en: Group
sq: Grupi

en: Canada
sq: Kanada

en: choose device
sq: zgjedhe mjetin

en: Remove from LVM
sq: Zhduke nga LVM

en: Timezone
sq: Zon� orare

en: German
sq: Gjermane

en: Next ->
sq: Tjetri ->

en: Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine.
sq: Duke nisur k�to mund�si p�r t� shtypur nj� tekst nga skedaret me nj� gjuh� japoneze. Ju duhet t� p�rdorni k�t� funksion, n�se ju me t� v�rtet d�shironi ta shtypni n� japonishte, dhe n�se ai �sht� i aktivizuar ju nuk keni mund�si t� shtypni shkronjat e theksuara n� polis� latine, me k�t� ju nuk keni mund�si ta rregulloni zon�n e shkrimit, madh�sin� e shkronjave, etj. K�to rregulla do t� rregullojn� vet�m stampuesit e p�rcaktuar n� k�t� makin�. N�se ju d�shironi t� shtypni nj� tekst n� japonishte n� stampues, paraqituni n� stampuesin e makin�s s� larg�t, dhe ju duhet t'aktivizoni k�t� funksion n� makin�n e larg�t.

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
sq: 
    Ekzistojn� mund�sit� q� kjo ndarje t�
    jet nj� ndarje piloti p�r sistemin.
    Dhe ju nuk duhet ta ndryshoni at�.

en: Guinea-Bissau
sq: Guinea-Bisau

en: Horizontal refresh rate
sq: Frekuenc� horizontale freskuese

en: Edit
sq: Botoje

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
sq: �sht� e pa mundur moszgjedhja e montimit t� k�saj pike, sepse p�rdoret nga loopback. Zhdukeni loopback n� fillim

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
sq: Konfigurimi i rrjetit t� b�r� gjat� instalimit nuk mund t� niset tani. Ju lutemi verifikoni n�se rrjeti juaj �sht� aktivizuar mbas� nisjes. Niseni duke p�rdorur Qendr�n Kontrolluese Mandrake, n� sektorin "Rrjeti & Interneti"/"Kyqja", dhe provoni p�rs�ri ta konfiguroni stampuesin tuaj n� sektorin "Materiali"/"Stampues".

en: USB controllers
sq: Kontrolluesit USB

en: What norm is your TV using?
sq: Cilat norma p�rdor� televizori juaj?

en: Type:
sq: Tipi:

en: Share name
sq: Emri shp�rndar�s

en: enable
sq: aktiv

en: Contacting Mandrake Linux web site to get the list of available mirrors...
sq: Lidhje n� sitin Mandrake Linux p�r t� pranuar list�n e lir� t� pasqyreve...

en: A problem occured while restarting the network: 
    
    %s
sq: Nj� problem �sht� paraqituar gjat� nisjes s� rrjetit (network): 
    
    %s

en: Remove the loopback file?
sq: Zhduke skedaren loopback?

en: Selected size is larger than available space
sq: Madh�sia e zgjedhur �sht� shum� m� e gjat� se sa hap�sira e lir�

en: NCP server name missing!
sq: Emri i Serverit NCP mungon!

en: Please choose your country.
sq: Ju lutemi, zgjedheni shtetin tuaj.

en: Hard Disk Backup files...
sq: Regjistrimi i Skedareve n� Disk t� Fort�...

en: Laotian
sq: Laotien

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
sq: Protokoli rstat mud�son q� p�rdoruesit e t� nj�jtit rrjet, t� p�rfitojn�
    t� drejta e barabarta nga secila makin� e lidhur n� at� rrjet.

en: Re-generating list of configured scanners ...
sq: Ri-prodhimi i list�s s� skanerve konfigurues ...

en: Scanner
sq: Skaneri

en: Warning: testing this graphic card may freeze your computer
sq: Kujdes: testimi i k�saj kartele grafike mund ta blokoj kompjuterin tuaj

en: The user name must contain only lower cased letters, numbers, `-' and `_'
sq: Emri i p�rdoruesit mund t� p�rmbaj� vet�m shkonja t� vogla, numra, njashtu edhe shenjat `-' dhe `_'

en: Welcome To Crackers
sq: Mir�seardhje P�r Pirat

en: Module options:
sq: Opcionet e moduleve:

en: Secure your networks with the Multi Network Firewall
sq: Siguroni rrjetet tuaja me Multi Mur t� Zjarrt Network

en: Go on without configuring the network
sq: Vazhdo pa konfigurimin e rrjetit

en: Abort
sq: Nd�rpreje

en: No password prompt on %s at port %s
sq: Ska nevoj� p�r nj� parull� t� %s n� port�n %s

en: Kensington Thinking Mouse with Wheel emulation
sq: Kensington Thinking Mouse me Rrot� imituese

en: Usage of remote scanners
sq: P�rdorimi i skanerve t� larg�t

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
sq: Ndarja e juaj Windows �sht� e pa defragmentuar. Ju lutemi riniseni kompjuterin tuaj n� Windows, the niseni programin p�r defragmentim ``defrag'', mandej riniseni instalimin e Mandrake Linux

en: Dvorak (Norwegian)
sq: Dvorak (Norvegjishte)

en: Hard Disk Backup Progress...
sq: P�rparim gjat� Regjistrimit t� Skedareve n� Disk� t� Fort�...

en: Unable to fork: %s
sq: Nuk mund t� furk-oj: %s

en: Type:
sq: Tipi:

en: <-- Edit Client
sq: <-- Botoje Klientin

en: no fonts found
sq: asnj� polis� e gjetur

en: Mouse
sq: Mini

en: not enough room in /boot
sq: nuk ka vend t� mjaftuesh�m n� repertorin /boot

en: Liechtenstein
sq: Lieshtenshtajni

en: Host name
sq: Emri i ftuesit

en: the color of the progress bar
sq: ngjyra e shufr�s p�rparuese

en: Suppress Fonts Files
sq: Zhduki skedaret e Polis�s

en: Add to RAID
sq: Shto n� RAID

en: You can add additional entries in yaboot for other operating systems,
    alternate kernels, or for an emergency boot image.
    
    For other OSs, the entry consists only of a label and the "root"
    partition.
    
    For Linux, there are a few possible options:
    
     * Label: this is the name you will have to type at the yaboot prompt to
    select this boot option.
    
     * Image: this is the name of the kernel to boot. Typically, vmlinux or a
    variation of vmlinux with an extension.
    
     * Root: the "root" device or ``/'' for your Linux installation.
    
     * Append: on Apple hardware, the kernel append option is often used to
    assist in initializing video hardware, or to enable keyboard mouse button
    emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.
    The following are some examples:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111
    hda=autotune
    
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Initrd: this option can be used either to load initial modules before
    the boot device is available, or to load a ramdisk image for an emergency
    boot situation.
    
     * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you
    need to allocate a large ramdisk, this option can be used to specify a
    ramdisk larger than the default.
    
     * Read-write: normally the "root" partition is initially mounted as
    read-only, to allow a file system check before the system becomes ``live''.
    You can override the default with this option.
    
     * NoVideo: should the Apple video hardware prove to be exceptionally
    problematic, you can select this option to boot in ``novideo'' mode, with
    native frame buffer support.
    
     * Default: selects this entry as being the default Linux selection,
    selectable by pressing ENTER at the yaboot prompt. This entry will also be
    highlighted with a ``*'' if you press [Tab] to see the boot selections.
sq: Ju mund t� shtoni nj� hyrje plot�suese n� yaboot, p�r t� nisur nj� sistem
    tjet�r eksploatues, p�r b�rthama apo p�r imazhe t'emergjenc�s boot.
    
    P�r sisteme tjera eksploatuese, hyrjet p�rmbahen n� nj� etiket�, me
    ndarje rr�nj�zore "root".
    
    P�r Linux, ekzistojn� disa mund�si :
    
     * Etiketa: ky �sht� nj� em�r i thjesht� i cili duhet t� shkruhet n� lajmin
    mik�prit�s t� yaboot p�r ta aktivizuar k�t� opcion boot.
    
     * Imazhi: ky �sht� nj� em�r i b�rtham�s p�r nisje boot.
    Zakonisht, vmlinux apo ndryshimi i vmlinux me nj� shtes�;
    
     * Rr�nja: mjeti rr�nj� "root" apo ``/'' p�r Inslaimin e Linux;
    
     * Bashkangjitje: N� materiale Apple, b�rthama bashkangjit�se �sht� e
    p�rdorur gjithnj�, p�r t� asistuar n� inicializimin e materialit video,
    apo p�r ti aktivizuar kopsat e tastier�s, dhe t� minit, konkurimi i
    tastier�s n� dy kopsa, t� cill�t, i mungojn� minit shpesh� her� tek
    Apple. Ja pra disa shembuj:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111
    hda=autotune
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Skedare RamDisk: kjo mund�si mund t� p�rdoret p�r t� ngarkuar
    modulet para se mjtei t� niset, t� jet� n� disponim,
    apo p�r t� ngarkuar nj� imazh� ramdisk, p�r nj� nisje t'emergjences�.
    
     * Madh�sia-RamDisk: madh�si me marr�vshje, p�r ramdisk �sht� zakonisht
    4096 byt�. N�se ju keni nj� madh�si m� t� madhe se kjo, at�her p�rdoreni
    k�t� mund�si;
    
     * Lexo-shkruaj: normalisht ndarja "root" �sht� fillimisht e montuar
    n� modin e leximit, p�r ta verifikuar sistemin e skedareve para se t�
    jet� i aktivizuar ``live''. Me k�t� opcion, ju mund ta autorozoni
    ndarjen rr�nj�zore t� jet� montuar direkt n� mod� shkrimi.
    
     * NoVideo: n�se kartela grafike ju paraqet shum� probleme, ju duhet
    t� aktivizoni k�t� opcion p�r tu nisur n� mod� ``novideo'', me korniz�
    t� p�rkrahur n� tampon.
    
     * Marr�veshje: zgjidheni k�t� hyrje sikur mund�si me marr�veshje,
    aktivizojeni duke shtypur mbi ENTER [Return], n� lajmin mik�prit�s.
    Kjo hyrje do t� p�rcillet me ``*'', n�se ju e shtypni [Tab] p�r t�
    v�rejtur list�n me t� gjitha mund�sive p�r zgjedhje.

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
sq: Stampuesi  "%s" �sht� shtuar me sukses n� Star Office/OpenOffice.org/GIMP.

en: No floppy drive available!
sq: Asnj� lexues i lir� p�r disket� flopi!

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
sq: P�r ta p�rfituar list�n e parametrave n� disponibilitet p�r stampuesin e tanish�m, lexoni list�n e posht� sh�nuar apo klikoni mbi kops�n "Shtype list�n e mund�sive " button.%s%s%s

en: Saudi Arabia
sq: Arabis Saudite

en: Continue anyway?
sq: Vazhdo pa marr� parasysh�?

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
sq: N�se stampuesi i juaj nuk gjindet n� list�n e shfletuar, zgjedheni nj�rin nga k�ta q� i p�rshtatet (shiqo n� manuelin e stampuesit) apo di�ka t� ngjajsh�m.

en: Printer
sq: Stampues

en: Some devices were added:
sq: Disa mjete jan� shtuar:

en: Geometry: %s cylinders, %s heads, %s sectors
sq: Gjeometria: %s cilindrat, %s kokat, %s sektor�t

en: Printing on the printer "%s"
sq: Stampin n� stampuesin "%s"

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
sq: /etc/hosts.allow dhe /etc/hosts.deny jan� konfiguruar m� heret - t� pa ndryshuar�

en: Restore From Tape
sq: Riparoje Nga Kaseta

en: Choose the profile to configure
sq: Zgjedheni profilin p�r ta konfiguruar

en: Password minimum length and number of digits and upcase letters
sq: Gjat�sia minimale e parull�s me num�r digjital dhe me shkronja

en: 
    
    Enter a Zeroconf host name without any dot if you don't
    want to use the default host name.
sq: 
    
    Futni nj� konfigurim zero t� emrit t� ftuesit pa asnj� pik�, ose n�se nuk
    d�shironi ta p�rdorni emrin e ftuesit me marr�veshje.

en: Backup Now from configuration file
sq: Regjistroje Tani nga konfiguruesi i skedares

en: Mount points should contain only alphanumerical characters
sq: Pikat montuese duhet t� posedojn� vet�m shkronja dhe num�ra

en: Restarting printing system...
sq: Rinisja e sistemit stampues...

en: See hardware info
sq: V�shtroi infomacionet mbi materialin

en: Day
sq: Dita

en: First sector of boot partition
sq: Sektori i par n� ndarjen boot

en: Printer manufacturer, model
sq: Prodhuesi i stampuesit, modeli

en: PDQ - Print, Don't Queue
sq: PDQ - Stampo, Mos prit n� Rresht

en: [OPTIONS]...
    Mandrake Terminal Server Configurator
    --enable         : enable MTS
    --disable        : disable MTS
    --start          : start MTS
    --stop           : stop MTS
    --adduser        : add an existing system user to MTS (requires username)
    --deluser        : delete an existing system user from MTS (requires username)
    --addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)
    --delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)
sq: [OPTIONS]...
    Konfigurim i Terminalit Server Mandrake
    --enable         : i lir� MTS
    --disable        : i nx�n� MTS
    --start          : nise MTS
    --stop           : ndale MTS
    --adduser        : shtoje nj� sistem ekzistues q� p�rdoret n� MTS (nevojitet emri i p�rdoreusit)
    --deluser        : zhduke nj� sistem ekzistues q� p�rdoret nga MTS (nevojitet emri i p�rdoreusit)
    --addclient      : shtoje nj� makin� klienti n� MTS (nevojitet adresa MAC, IP, emri i imazhit nbi)
    --delclient      : zhduke nj� makin� kliente nga MTS (nevojitet adresa MAC, IP, emri i imazhit nbi)

en: Subnet Mask:
sq: Maskim i Nd�r-Rrjetit:

en: Set password expiration and account inactivation delays
sq: �faqe afat-zgjatjen e parull�s dhe dezaktivizimin e koh�zgjatjes s� t� gjirollogaris�

en: _: load here is a noun, the load of the system
    Load
sq: _: ngrakoje k�tu �sht� nj� em�r, i sistemit ngrakues
    Ngarkoje

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
sq: Dy parametra jan� me r�nd�si frekuenca e rifreskimit vertikal, nga e cila
    mvaret se me �far� shpejt�sie rifreskohet monitori
    dhe nj�herit m� e rend�sishmja frekuenca e sikronizimit horizontal
    nga e cila p�rcaktohet shpejt�sia e vijimit vijave n� monitor.
    
    �sht� shum� ME R�ND�SI q� ju mos ta zgjdhnji vet�m nj� monitor
    me nj� frekuenc� t� rifreskimit i cili mund ti tejkalon mund�sit� e
    monitorit tuaj.
    Q� mund ta d�mtoj.
     N� rast t� dyshimit zgjedheni nj� rregullim m� t� ul�t pa rrezik.

en: Modify
sq: Ndryshoje

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
sq: 
    Urdh�rat "%s" dhe "%s" mund�sojn� njashtu ti ndryshoni parametrat e stampimit p�r nj� stampim t� veqant�. �sht� e mjaftueshme q� ti shtoni parametrat e d�shiruar mbi linj�n komanduese. P�r shembull  "%s <skedare>".

en: Need hostname, username and password!
sq: Ka navoj� p�r em�r ftues, em�r p�rdoruesi dhe parulla!

en: Insert floppy
sq: Futeni disket�n

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
sq: WebDAV �sht� nj� protokol i cili ju mund�son q� t� montohet nj� repertor
    lokal i serverit web, dhe t� qeveriset sikur nj� sistem i skedareve lokale
    (me nj� kusht n�se serveri web �sht� i konfiguruar si server WebDAV).
    N�se d�shironi t� shtoni pika tjera montuese zgjedheni WebDAV "E Re".

en: new
sq: e re

en: Enable/Disable syslog reports to console 12
sq: Aktivizoje/Blokoje raportin syslog n� konsol�n 12

en: Would you like to try again?
sq: A d�shironi t� provoni p�rs�ri?

en: Wizard
sq: Asistenti

en: Edit selected server
sq: Botoje serverin e zgjedhur

en: Please choose where you want to backup
sq: Ju lutemi zgjedheni vendin n� t� cilin d�shironi ta vendosni regjistrimin

en: You need to reboot for the partition table modifications to take place
sq: Ju duhet ta rinisni sistemin q� ndryshimet t� trasportohen n� tabel� q� t� marren parasysh

en: Do not include the browser cache
sq: Mos i p�rfshij� skedaret e fshehura

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
sq: Gabim gjat� verifikimit t� sistemit t� skedareve %s. A d�shironi ti korigjoni gabimet? (kujdes ju mund ti humbni t� dh�nat)

en: Please, choose your keyboard layout.
sq: Ju lutemi, zgjedheni tastier�n tuaj.

en: Please choose your mouse type.
sq: Ju lutemi, zgjedheni tipin e minit tuaj.

en: Connect...
sq: Lidhe...

en: Failed to configure printer "%s"!
sq: D�shtim gjat� konfigurim t� stampuesit %s"!

en: not configured
sq: i pa konfiguruar

en: About
sq: N� lidhje me

en: Proxies configuration
sq: Konfigurimi i serverve mandatues (proxie)

en: Start: sector %s
sq: Nise: sektorin %s

en: No Mask
sq: Asnj� Mask�

en: Network interface already configured
sq: Interfaci i Rrjetit �sht� ve�se i konfiguraur

en: Couldn't access the floppy!
sq: Nuk mund t� hyj� n� lexuesin e disket�s flopi!

en: connecting to Bugzilla wizard ...
sq: lidhja n� asistentin Bugzilla ...

en: Mail Server
sq: Server i Lajmeve

en: Please click on a partition
sq: Ju lutemi klikoni mbi nj� ndarje

en: Multi-function device on HP JetDirect
sq: Periferik HP JetDirect multi-funksionues

en: Have a nice day!
sq: Ju urojm� dit� t� mbar�!

en: Upgrade %s
sq: Azhurno %s

en: Select Printer Connection
sq: Zgjedheni tipin e Lidhjes s� Stampuesit

en: Scanning for TV channels in progress ...
sq: K�rkimi i kanaleve TV n� vazhdim e sip�r...

en: Error during sending file via FTP.
     Please correct your FTP configuration.
sq: Gabim gjat� d�rgimit t� nj� skedare via FTP.
     Ju lutemi korigjone konfigurimin tuaj n� FTP.

en: IP Range Start:
sq: Nisja e Kufirit IP

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
sq: Superserveri i internetit daemon (i quajtur inetd) niset n� nj� m�nyr�
    t� ndryshme nga serviset tjera t� nevojitura n� internet. �sht� p�rgjegj�s p�r nisjen
    e nj� shumice t� serviseve, duke p�rfshir� telnet, ftp, rsh dhe rlogin. N�se shk�putet inetd
    ai do ti shk�put t� gjtha serviset e rradhitura me lart�.

en: the height of the progress bar
sq: lart�sia e shufr�s p�rparuese

en: 
    - Save via %s on host: %s
sq: 
    - Shp�toje via %s n� ftuesin: %s

en: Argentina
sq: Argjentina

en: Domain Name Server
sq: Server i Emrit t� Pron�s

en: Security Level:
sq: Niveli i Siguris�:

en: Mount points must begin with a leading /
sq: Pikat montuese duhet t� fillojn� me /

en: Choose your CD/DVD device
sq: Zgjedheni mjetin tuaj CD/DVD

en: Postfix Mail Server
sq: Server i letrave Postfix

en: Quit without saving
sq: Braktise pa regjistruar

en: Yemen
sq: Jemeni

en: This product is available on the MandrakeStore Web site.
sq: Ky produkt �sht� i lir� n� MandrakeStore

en: => There are many things to choose from (%s).
sq: => Ka shum� gj�ra p�r ti zgjedhur nga (%s).

en: Hard drive detection
sq: Zbulim i Diskut t� Fort� (Hard drive)

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
sq: Ju nuk e keni zgjedhur asnj� grup t� pakove.
    Ju lutemi zgjedheni nj� instalim minimal t� d�shiruar:

en: You need the Alcatel microcode.
    You can provide it now via a floppy or your windows partition,
    or skip and do it later.
sq: Ju keni nevoj� p�r mikrokodin Alcatel.
    Ju mund ta pranoni at� tani n�p�rmjes disket�s floppy apo ndrajes windows,
    ose braktiseni at� dhe kryeni m� von�.

en: Please enter the WebDAV server URL
sq: Ju lutemi futni adres�n e serverit WebDAV

en: Tajikistan
sq: Tagjikistane

en: Accept
sq: Pranoje

en: Description
sq: P�rshkrimi

en: Error opening %s for writing: %s
sq: Gabim gjat� hapjes s� %s p�r shkruarjen: %s

en: Mouse type: %s
sq: Tipi i minit: %s

en: Your card can have 3D hardware acceleration support with XFree %s.
sq: Kartela e juaj mund t� ket� materialin 3D nxitues me p�rkrahje t� XFree %s.

en: Choose a monitor
sq: Zgjedheni nj� monitor

en: Empty label not allowed
sq: Etiket� e zbraz�t nuk autorizohet

en: Maltese (UK)
sq: Malt� (UK)

en: I can't add any more partition
sq: Nuk mund t� shtoj ndonji ndarje tjet�r

en: Size in MB:
sq: Madh�sia n� MB:

en: Remote printer
sq: Stampues i larg�t

en: Please choose a language to use.
sq: Ju lutemi zgjedheni gjuh�n p�rdoruese.

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
sq: KUJDES: ky periferik �sht� konfiguruar m� heret, p�r kyqje n� Intrernet.
    Klikoni mbi OK p�r ta konservuar k�t� konfigurim.
    N�se ju nuk klikoni mbi OK, konfigurimi i tanish�m do t� z�vend�sohet me ndyshimet t� cilat ju do ti b�ni.

en: I can set up your computer to automatically log on one user.
sq: P�rderisa t� niset kompjuteri juaj, ka mund�si q� t� lidhet automatikisht n� nj� p�rdorues.

en: Floppy format
sq: Formatimi i disket�s flopi

en: Generic Printers
sq: Stampues t� P�rgjithsh�m

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
sq: Ju lutemi zgjedheni stampuesin n� t� cilin duhet t� shtypen punimet (jobs), ose futni emrin/skedaren dhe mjetit n� linj�n hyr�se

en: The scanners on this machine are available to other computers
sq: Skaner�t n� k�t� makin� jan� t� lir� p�r kompjuter� t� tjer�

en: First sector of the root partition
sq: Sektori i par nj� ndarje rr�nj�zore (root)

en: Alternative drivers
sq: Pilot� alternativ�

en: 
    Please check all options that you need.
sq: 
    Ju lutemi n�nvizoni opcionet p�r t� cilat keni nevoj�.

en: Initrd
sq: Skedare RamDisk

en: Cape Verde
sq: Kapi i Gjelb�rt

en: whether this cpu has the Cyrix 6x86 Coma bug
sq: n�se ky cpu posedon nj� bug me presje Cyrix 6x86

en: Loading printer configuration... Please wait
sq: Ngarkimi i konfigurimit t� printerit... Nj� moment ju lutemi

en: early pentiums were buggy and freezed when decoding the F00F bytecode
sq: pentiumet e m� hershme jan� bug(uar) dhe blokuar kur �sht� dekoduar F00F n� bytecode

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
sq: Ju lutemi zgjedheni port�n n� t� cil�n stampuesi juaj �sht� i kyqur, ose futni emrin e mjetit apo t� skedares n� linj�n hyr�se

en: /Options/Test
sq: /Opcione/Testi

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
sq: Ky nivel i siguris� duhet t� manipulohet me kujdes. E b�n� q� sistemi i juaj,
    t� p�rdoret me leht�, nga mvar�sit e siguris�: nuk duhet t� p�rdoret n�
    nj� makin� t� lidhur n� rrjet (network) ose internet. Asnj� parull� nuk ka nevoj� t� futet

en: Mounting partition %s
sq: Montimi n� ndarjen %s

en: User name
sq: Emri i p�rdoruesit

en: Which partition do you want to use for Linux4Win?
sq: Cil�n ndarje d�shironi ta p�rdorni p�r Linux4Win

en: Test pages
sq: Test faqesh

en: Logical volume name
sq: Emri logjik i v�llimit

en: List of data to restore:
sq: Listoi t� dh�nat p�r ti riparuar:

en: Checking %s
sq: Verifikimi i %s

en: TCP/Socket Printer Options
sq: Opcionet p�r Stampues t� rrjetit (TCP/Socket)

en: Card mem (DMA)
sq: Kartela e memoris� (DMA)

en: Disconnecting from Internet
sq: Shk�putje nga Interneti

en: France
sq: Franca

en: browse
sq: shfletues

en: Checking installed software...
sq: Verifikimi i programit t� instaluar...

en: Remote printer name missing!
sq: Emri i stampuesit t� larg�t mungon�!

en: Do you want to enable printing on printers in the local network?
sq: A d�shironi t'aktivizoni stampimin mbi stampuesin t� rrjetit tuaj?

en: Turkey
sq: Turke

en: Number of buttons
sq: Sasia i kopsave

en: Vietnamese "numeric row" QWERTY
sq: Vietnamisht "kolon� numerike" QWERTY

en: Module
sq: Modul�

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
sq: Njashtu, n�se skedaret e rreshtuara t� cilat nuk jan� krijuar me k�t� program apo me "foomatic-configure" nuk mund t� trasferohen.

en: Hardware
sq: Hardver

en: Ctrl and Alt keys simultaneously
sq: �el�sat e nj�kohsh�m Ctrl dhe Alt

en: United States
sq: Shtetet e Bashkuara

en: User umask
sq: P�rdorues umask

en: Default OS?
sq: Sistem i Eksploatimit me marr�veshje?

en: Swiss (German layout)
sq: Zvic�rrane (gjermanishte)

en: Configure all heads independently
sq: Konfigurimi i ekraneve veqmas

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
sq: Zgjedheni nj�rin stampues t� cilin d�shironi ta instaloni. Konfigurimi i stampuesit do t� funksionoj n� m�nyr� automatike. N�se stampuesi juaj nuk �sht� zbuluar n� m�nyr� korrekte, apo n�se d�shironi nj� konfigurim personel, aktivizojeni "Konfigurim Manuel".

en: NTP Server
sq: Server NTP

en: Sulogin(8) in single user level
sq: Sulogin(8) n� nivelin e p�rdoruesit vetiak

en: Load/Save on floppy
sq: Ngarko/Regjistro n� disket�

en: This theme does not yet have a bootsplash in %s !
sq: K�to tema nuk kan� ende imazhe me nisje t� udh�zuar n� %s !

en: nice
sq: i mir�

en: Leaving in %d seconds
sq: Do ta braktis� p�r %d sekunda

en: Please choose which serial port your modem is connected to.
sq: Ju lutemi zgjedheni port�n serike mbi t� cil�n modemi juaj �sht� i lidhur

en: Property
sq: Prona

en: LAN Configuration
sq: Konfigurimi LAN

en: Ghana
sq: Kana

en: Path or Module required
sq: Shtegu apo Moduli nevojitet

en: Advanced Options
sq: Opcionet me P�rpar�si

en: View Configuration
sq: Paraqite Konfigurimin

en: Coma bug
sq: Bug me presje

en: At this point, you need to choose which partition(s) will be used for the
    installation of your Mandrake Linux system. If partitions have already been
    defined, either from a previous installation of GNU/Linux or by another
    partitioning tool, you can use existing partitions. Otherwise, hard drive
    partitions must be defined.
    
    To create partitions, you must first select a hard drive. You can select
    the disk for partitioning by clicking on ``hda'' for the first IDE drive,
    ``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
    
    To partition the selected hard drive, you can use these options:
    
     * "%s": this option deletes all partitions on the selected hard drive
    
     * "%s": this option enables you to automatically create ext3 and swap
    partitions in the free space of your hard drive
    
    "%s": gives access to additional features:
    
     * "%s": saves the partition table to a floppy. Useful for later
    partition-table recovery if necessary. It is strongly recommended that you
    perform this step.
    
     * "%s": allows you to restore a previously saved partition table from a
    floppy disk.
    
     * "%s": if your partition table is damaged, you can try to recover it
    using this option. Please be careful and remember that it doesn't always
    work.
    
     * "%s": discards all changes and reloads the partition table that was
    originally on the hard drive.
    
     * "%s": unchecking this option will force users to manually mount and
    unmount removable media such as floppies and CD-ROMs.
    
     * "%s": use this option if you wish to use a wizard to partition your
    hard drive. This is recommended if you do not have a good understanding of
    partitioning.
    
     * "%s": use this option to cancel your changes.
    
     * "%s": allows additional actions on partitions (type, options, format)
    and gives more information about the hard drive.
    
     * "%s": when you are finished partitioning your hard drive, this will
    save your changes back to disk.
    
    When defining the size of a partition, you can finely set the partition
    size by using the Arrow keys of your keyboard.
    
    Note: you can reach any option using the keyboard. Navigate through the
    partitions using [Tab] and the [Up/Down] arrows.
    
    When a partition is selected, you can use:
    
     * Ctrl-c to create a new partition (when an empty partition is selected)
    
     * Ctrl-d to delete a partition
    
     * Ctrl-m to set the mount point
    
    To get information about the different file system types available, please
    read the ext2FS chapter from the ``Reference Manual''.
    
    If you are installing on a PPC machine, you will want to create a small HFS
    ``bootstrap'' partition of at least 1MB which will be used by the yaboot
    bootloader. If you opt to make the partition a bit larger, say 50MB, you
    may find it a useful place to store a spare kernel and ramdisk images for
    emergency boot situations.
sq: N� k�t� etap� ju duhet t� zgjedhni se cila(t) ndarje(t) do t� p�rdoret(n)
    p�r sistemin tuaj Mandrake Linux. N�se ndarja e diskut �sht� b�r� m� heret,
    nga nj� instalim tjet�r GNU/Linux apo nga nji veg�l tjet�r ndar�se, ju
    mund t� p�rdorni ndarjet e b�ra. Mes tjerash ndarjet duhen t� jen� t�
    p�rcaktuara
    
    P�r t� krijuar nj� ndarje, ju duhet t� zgjedhni diskun q� duhet t� p�rdoret.
    Ju mund ta zgjedhni duke klikuar mbi ``hda'' p�r diskun e par� IDE, ``hdb''
    p�r diskun e dyt�, ``sda'' p�r dyskun e par� SCSI, dhe ashtu me radh�.
    
    P�r ta ndar� diskun e fort t� zgjedhur, ju mund t� p�rdorni opcionet me
    radh� :
    
     * "%s": ky opcion do t� zhduk, t� gjitha ndarjet n� diskun e zgjedhur
    
     * "%s": ky opcion mund�son krijimin e nj� sistemi t� skedareve
    ext3 dhe swap t� ndarjeve, n� hap�sir�n e lir� t� diskut tuaja
    
    "%s": mund�son hyrjen n� fonksionimin e llogarive:
    
     * "%s": regjistro tabel�n e ndarjeve n� floppy.
    Kjo mund�si �sht� tejet praktike, p�r rikuperimin e ndarjeve t�
    d�mtuara. Dhe rekomanduar q� t� vazhdoni me k�t� m�nyr�.
    
     * "%s": mund�son restaurimin e nj� tabele t� nj� ndarje,
    t� regjistruar m� heret n� nj� diskete.
    
     * "%s": n�se tabela juaj e ndarjes �sht� d�mtuar ju keni mund�si
    ta rikuperoni me k�to opcione. Keni kujdes dhe dijeni se kjo nuk
    funksionon n� t� gjitha rastet.
    
     * "%s": largon ndryshimet dhe ngarkon tabel�n e ndarjeve filestare.
    
     * "%s": duke sh�nuar n� k�t� kuti, CD-ROM(et) dhe disketat floppy
    (dhe p�rkrahje tjera) do t� ngarkohen automatikisht.
    
     * "%s": p�rdoreni k�t� mund�si n�se ju keni nevoj� ta ndani
    diskun tuaj. Kjo mund�si �sht� shum� e rekomandura n�se ju jeni fillestar
    n� l�nd�n e ndarjeve.
    
     * "%s": p�rdore k�t� opcion p�r ti anuluar ndryshimet tuaja.
    
     * "%s": mund�son akcionet llogarit�se n� ndrajet, (tipi,
    mund�sit, dhe format) dhe dor�zon m� shum� informacione.
    
     * "%s": mbasi q� shp�rndarja do t� p�rfundoj, kjo kops� do t� ju
    mund�son regjistrimin ndryshimeve tuaja n� disk.
    
    Mbasi q� ta keni p�rcaktuar mash�sin� e diskut tuaj, ju keni mund�si ti
    paraqitni madh�sit� ndar�se duke p�rdorur kopsat (shigjeta) t� tastier�s.
    
    Sh�noni: ju mund ti ndryshoni t� gjitha mund�sit� p�r ndarje duke p�rdorur
    tastier�n. Kaloni n�p�rmjet shfletuesit duke p�rdorur kopsat [Tab] dhe
    shigjetat [Lart/Posht�].
    
    Mbasi t� zgjedhni nj� ndarje, ju mund ta p�rdorni :
    
     * Ctrl-c p�r t� krijuar nj� ndarje t� re (p�rderisa nj� ndarje e zbraz�t
    �sht� zgjedhur);
    
     * Ctrl-d p�r t� zhdukur nj� ndarje;
    
     * Ctrl-m p�r t� caktuar nj� pik� montuese.
    
    P�r t� p�rfituar m� shum� informacione mbi sistemet e skedareve, lexoni mbi
    sistemin e skedareve ext2FS n� ``Doracakun referues''.
    
    N�se ju jeni duke instaluar nj� stacion PPC, ju duhet t� krijoni nj� ndarje
    t� vog�l HFS ``bootstrap'' m� s� paku 1MB, e cila do t� p�rdoret nga bootloader
    yaboot. N�se d�shironi t� b�ni nj� ndarje m� t� madhe, p.sh 50MB, ju duhet
    t� gjeni nj� veg�l p�r t� vendosur b�rthamat dhe imazhet ramdisk hyr�se n�
    rast� t� ndonji problemi.

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
sq: Kartela Grafike
    
       Instaluesi normalisht e zbulon dhe e konfiguron automatikisht kartel�n,
    grafike n� kompjuterin tuaj. N�se ky operacion d�shton, ju keni mund�si
    ta zgjedhni n� k�t� list� kartel�n tuaj aktuale.
    
       N� raste se servera t� ndrysh�m jan� n� disponibilitet p�r kartel�n tuaj,
    me apo pa nisje n� 3D, juve do t� ju propozohet zgjedhja e nj� serveri m� t�
    mir� i cili do t� ju nevojitet.

en: There was an error installing packages:
sq: Nj� gabim �sht� paraqitur gjat� instalimit t� pakove:

en: Lexmark inkjet configuration
sq: Konfigurimi i stampuesit Lexmark inkjet

en: Undo
sq: Gjendja paraprake

en: Save partition table
sq: Shp�toje tabel�n ndar�se

en: Finnish
sq: Finlandisht

en: Macedonia
sq: Maqedonia

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
sq: P�r t� autorizuar nj� p�rdorues t� grupit q� t� shp�rndaje repetor�t, ju duhet ti shtoni t� gjith� p�rdoruesit po n� at� grup "fileshare". 
    Kjo mund t� arrihet falas programit userdrake.

en: Slovenian
sq: Sllovene

en: Authorize:
    
    - all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to "ALL",
    
    - only local ones if set to "LOCAL"
    
    - none if set to "NONE".
    
    To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5)).
sq: Autorizim:
    
    - t� gjitha sh�rbimet kontrolohen nga tcp_wrappers (shiqo tek hosts.deny(5) faqe ndihmuese) n�se konfigurohet me "GJITHA",
    
    - vet�m ata lokal n�se konfigurohen me "LOKAL".
    
    - jo n�se konfigurohet me "JO".
    
    P�r ti autorizuar sh�rbimet q� ju nevojiten, p�rdoreni /etc/hosts.allow
    (shiqo tek hosts.allow(5)).

en: Libya
sq: Libia

en: Configuring scripts, installing software, starting servers...
sq: Konfigurim i skripteve, instalimet e programeve, nisja e serverave...

en: Printer on parallel port #%s
sq: Stampues n� port�n paralele #%s

en: 
    - Burn to CD
sq: 
    - Gdhende n� CD

en: Table
sq: Tabel� e ndrajeve

en: I don't know how to format %s in type %s
sq: I pa mundur formatimi i %s n� tipin %s

en: Model
sq: Modeli

en: USB printer #%s
sq: Stampues USB #%s

en: Stop Server
sq: Ndale Serverin

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
sq: 
    Zgjedhe nj� tem� p�r
    lilo dhe imazhin p�r nisje t� udh�zuar,
    ju mund ti zgjidhni
    veqmas

en: Modem
sq: Modemi

en: Use auto detection
sq: P�rdore zbuluesin automatik

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
sq: GPM shton nj� p�rkrahje p�r p�rdorimin e minit n� aplikacionet me mod�
    teksti si p�r shembull Midnight Commander. Njashtu mund�son edhe p�rdorimin
    e operacionit kopjo-dhe-ngjit�, dhe p�rfshin p�rkrahjen e menyve n� konsol�.

en: Started on boot
sq: Nise n� Nisje t� Udh�zuar

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
sq: Bashkangjituni me p�rkrahjen e ekipit MandrakeSoft dhe bashk�sis� Linux n� linje dhe shp�rndani diturit� tuaja, ndihmoni t� tjer�t q� t� b�hen Expert� n� linj� teknike me p�rkrahjen e sitit web:

en: No password aging for
sq: Asnj� parull� e vjet�rsuar p�r

en: The following options can be set to customize your
    system security. If you need an explanation, look at the help tooltip.
sq: Opcionet e radhitura mund�sojn� nj� rregullim t� mir�fillt t� sistemit
    tuaj t� siguris�. N�se ju keni nevoj� p�r nj� shpjegim, shiqoni n� vegl�ntooltip.

en: Automatically find available printers on remote machines
sq: Zbulim automatik i stampuesit t� lir� n� makin�n e larg�t

en: East Timor
sq: Timorit Lindor

en: On Tape Device
sq: n� Lexues t� Kaset�s

en: 
    - Save to Tape on device: %s
sq: 
    - Shp�toje n� Kaset� mes mjetit: %s

en: Login name
sq: Emri lidh�s

en: Report unowned files
sq: Raportim i skedareve jo p�rkat�se

en: Del profile...
sq: Zhduke Profilin...

en: Installing Foomatic...
sq: Instalimi i Foomatic...

en: Please log out and then use Ctrl-Alt-BackSpace
sq: Ju lutemi lidhuni dhe shtypni mbi kopsat Ctrl-Alt-BackSpace

en: detected
sq: zbuluar

en: The network needs to be restarted. Do you want to restart it ?
sq: Rrjeti duhet t� niset. A d�shironi ta nisni at� ?

en: Package:
sq: Pako:

en: Can't write /etc/sysconfig/bootsplash.
sq: Nuk mund t� shruhet n� /etc/sysconfig/bootsplash.

en: SECURITY WARNING!
sq: V�REJTJE SIGURIE!

en: No, I don't want autologin
sq: Jo, nuk d�shiroj autolidhje

en: Windows Migration tool
sq: Veg�l M�rgimi p�r Windows

en: All languages
sq: T� gjitha ghuh�t

en: Removing %s
sq: Zhdukja e %s

en: %s not found...
sq: %s nuk �sht� prezent...

en: Testing your connection...
sq: Testimi i lidhjes suaj...

en: Cache size
sq: Madh�sia e fshehur

en: Passwords are now enabled, but use as a networked computer is still not recommended.
sq: Parullat tani duhet t� jen� t� nevojshme, mir�po nuk �sht� e rekomandur q� ta p�rdorni k�t� makin� n� nj� rrjet (network).

en: Start sector:
sq: Sektori fillues:

en: Congo (Brazzaville)
sq: Kongo (Brazzaville)

en: Read
sq: Lexoje

en: The package %s needs to be installed. Do you want to install it?
sq: Pakot %s duhet t� jen� instaluar. A d�shironi ti instaloni ato?

en: Seychelles
sq: Sejqelesi

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
sq: Emri i modelit si rrezultat gjat� zbulimit automatik�, �sht� krahasuar n� baz�n e t� dh�nave t� stampuesve p�r t� gjetur korrespondenc� m� t� mir�. Kjo zgjidhje mund t� jet� e pa pranueshme, veqan�risht� n�se modeli juaj i stampuesit nuk paraqitet n� baz�n e t� dh�nave. Verifikoni k�t� zgjedhje dhe klikoni mbi "Modeli �sht� korrekt", n�se jo klikoni mbi "Zgjedheni modelin manuel" me k�t� ju mund ta zgjedhni modelin e stapuesit tuaj manuelisht�.
    
    Stampuesi juaj �sht� zbuluar nga Printerdrake sikur:
    
    %s

en: Bad password on %s
sq: Parull� e gabuar n� %s

en: 
    There is one unknown printer directly connected to your system
sq: 
    Nj� stampues i pa njoftur, �sht� i lidhur direkt n� sistemin tuaj

en: Right Control key
sq: �el�si Kontrollues Djathtas

en: Insert a FAT formatted floppy in drive %s with %s in root directory and press %s
sq: Futni nj� disket� t� formuar FAT n� mjetin %s me %s n� repertorin root dhe shtypni mbi %s

en: Zambia
sq: Zambiane

en: Security Administrator (login or email)
sq: Administrues Sigurie (login apo email)

en: Sorry, we support only 2.4 kernels.
sq: Kemi ndjes�, ne p�rkrahim vet�m b�rthamat 2.4

en: Romanian (qwerty)
sq: Romainshte (qwerty)

en: Under Devel ... please wait.
sq: N�n Nd�rtim ... nj� moment ju lutemi.

en: Egypt
sq: Egjipti

en: Czech Republic
sq: Republika �eke

en: Sound card
sq: Kartel� z�ri

en: Import Fonts
sq: Importimet e Polic�s

en: You have one big MicroSoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
sq: Disku i juaj posedon vet�m nj� ndarje t� madhe t� tipit FAT 
    (n� shumic�n e rasteve �sht� i p�rdorur nga Microsoft Dos/Windows).
    Ju duhet ta zvog�loni q� t� krijoni nj� ndarje tjet�r
    (kliko n� ndarje, mandej mbi "Ridimenzionim")

en: Suppress Temporary Files
sq: Zhduki skedaret e p�rkohshme

en: Congratulations, the network and Internet configuration is finished.
sq: Urime, konfigurimi i rrjetit dhe i internetit mori fund.

en: Change partition type
sq: Ndryshim i tipit t� ndarjes

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
sq: Vendosm�ria e ekranit
    
       Ju keni mund�si ta zgjedhni vendosm�rin� e ekranit k�tu, njashtu edhe
    thell�sin� e ngjyrave mes k�tyre mjeteve t� lira. Zgjedheni nj�r�n nga m�
    t� mirat q� ju p�rshtatet (ju do t� keni mund�si ta nd�rroni at� edhe mbas�
    instalimit). Nga zgjedhja e konfigurimit t� thjesht�, i cili �sht� i paraqitur
    n� monitor.

en: Network Options
sq: Opcionet e Rrjetit

en: Enable msec hourly security check
sq: Aktivizoje/Blokoje verifikim e siguris� n� gjdo or�

en: Display theme
    under console
sq: �faqe tem�n
    nd�r konsol�

en: Statistics
sq: Statistikat

en: (on %s)
sq: (mbi %s)

en: MM Series
sq: MM Serik

en: A library which defends against buffer overflow and format string attacks.
sq: Nj� biblotek� e cila ju mbron� kund�r sulmeve me tejkalim turmash.

en: average
sq: mesatar�

en: New printer name
sq: Em�r i ri p�r stampuesin

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
sq: Mund�so q� nj� p�rdorues t� montohet n� sistemin e skedares. Emri i
    montimit t� p�rdoruesit �sht� i shkruar n� mtabel�n q� ai vet t� mund t� �montohet nga
    sistemi i skedares p�rs�ri. Ky opcion n�nkupton opcionet noexec, nosuid dhe nodev (n�se jo do t� rishkruhet nga nd�rsekuencat e opcioneve, sikur
    n� opcionet e linj�s p�rdorues, exec, dev, suid ).

en: Equatorial Guinea
sq: Guinea e Ekuatorit

en: Backup System
sq: Regjistroje sistemin

en: Build Backup
sq: Nd�rtoje nj� Regjistrim

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
sq: P�r t� shtypur nj� skedare nga linja komanduese (dritare terminali) p�rdore urdh�rin "%s <skedare>" ose "%s <skedare>".

en: Currently, no alternative possibility is available
sq: K�tu nuk ka ndonji mund�si alternative

en: Romanian (qwertz)
sq: Romainshte (qwertz)

en: Write Config
sq: Shkruaje Konfiguruesin

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
sq: Servisi routed mund�son azhurnimin automatik t� tabel�s IP route via
    protokolit RIP. Duke marr� para sysh� se RIP p�rdoret n� rrjetet
    e vogla, dhe prtokolet m� komplekse nevojiten p�r rrjete m� komplekse.

en: Logitech Mouse (serial, old C7 type) with Wheel emulation
sq: Mini Logitech (serik, tip i vjet�r C7) me rrot� imituese

en: Other (not drakbackup) keys in place already
sq: Tjer� (mos drakbackup) �el�sat jan� n� ve�se n� vend

en: X (for X Window System) is the heart of the GNU/Linux graphical interface
    on which all the graphical environments (KDE, GNOME, AfterStep,
    WindowMaker, etc.) bundled with Mandrake Linux rely upon.
    
    You will be presented with a list of different parameters to change to get
    an optimal graphical display: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
    
    
    
    Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
    
    
    
    Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
    
    
    
    Test
    
       the system will try to open a graphical screen at the desired
    resolution. If you can see the message during the test and answer "%s",
    then DrakX will proceed to the next step. If you cannot see the message, it
    means that some part of the autodetected configuration was incorrect and
    the test will automatically end after 12 seconds, bringing you back to the
    menu. Change settings until you get a correct graphical display.
    
    
    
    Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
sq: X (p�r Sistemin Windows X) �sht� zemra e interfacit grafik p�r GNU/Linux
    n� t� cilin t� gjitha mjediset grafike (KDE, GNOME, AfterStep,
    WindowMaker, etj.) jan� t� denguara mbi Mandrake Linux.
    
    Juve do t� ju prezentohet lista e parametrave t� ndrysh�m p�r t� ndryshuar,
    dhe p�r t� pranuar �faqjet grafike optimale: Kartel� Grafike
    
       Instaluesi normalisht zbulon automatikisht dhe e konfiguron kartel�n,
    grafike n� kompjuterin tuaj. N�se ky operacion d�shton, ju keni mund�si
    ta zgjedhni n� k�t� list� kartel�n tuaj aktuale.
    
       N�se, server(a) t� ndrysh�m jan� n� disponibilitet p�r kartel�n tuaj, me
    apo pa nisje 3D, juve do t� ju propozohet zgjedhja e nj� serveri m� t� mir�,
    i cili do t� ju nevojitet.
    
    
    
    Monitori
    
       Instaluesi ka mund�si ta zbulon dhe ta konfigoj automatikisht monitorin
    tuaj t� lidhur n� kompjuter. N�se ai nuk konfigurohet automatikisht, ju keni
    mund�si ta zgjidhni monitorin tuaj nga kjo list�.
    
    
    Vendosm�ria e ekranit
    
       Ju keni mund�si ta zgjedhni vendosm�rin� e ekranit k�tu, njashtu edhe
    thell�sin� e ngjyrave mes k�tyre mjeteve t� lira. Zgjedheni nj�r�n nga m�
    t� mirat q� ju p�rshtatet (ju do t� keni mund�si ta nd�rroni at� edhe mbas�
    instalimit). Nga zgjedhja e konfigurimit t� thjesht�, i cili �sht� i paraqitur
    n� monitor.
    
    
    Test
    
       sistemi do t� mundohet t� hap� ekranin grafik me vendosm�ri t� d�shiruar.
    N�se ju keni mund�si t� shifni lajmin gjat� testimit njashtu edhe p�rgjegjen
    "%s", at�her DrakX do t� ju propozoj t� kaloni n� tjetr�n etap�. N�se ju
    nuk keni mund�si ta shifni lajmin, d.m.th. disa pjes� t� zbulimeve
    automatike jan� t� pa sakta dhe testi do t� p�rfundoj automatikisht mbas�
    12 sekondave, i cili do t� ju d�rgoj mbrapa n� menyn� e m� par�me.
    Ndryshoni parametrat derisa ju ta gjeni �faqjen korrekte grafike t� ekranit
    tuaj.
    
    
    
    Opcionet
    
       Ju k�tu keni mund�si t� zgjedhni gjdo gj� q� d�shironi n� kompjuterin tuaj,
    dhe automatikisht do t� kyqeni n� nisje me interfac grafik boot. Duksh�m, ju
    d�shironi t� verifikoni "%s" n�se kompjuteri juaj �sht� si nj� server,
    apo n�se ju nuk keni qen� i suksesh�m n� �faqjen e konfigurimit.

en: Browse
sq: Shfletues

en: Do you want to try to connect to the Internet now?
sq: A d�shironi t� lidheni n� Internet tani?

en: Belgian
sq: Belgjik

en: Do you have an ISA sound card?
sq: A posedoni nj� kartel� z�ri ISA?

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
sq: Asnj� kartel� rrjeti e zbuluar n� sistemin tuaj.
    Pra lidhja nuk mund konfigurohet.

en: Can't make screenshots before partitioning
sq: E pa mundur grabitja e ekranit (screenshots) para ndarjeve

en: Host Name
sq: Emri Ftues

en: /File/Save _As
sq: /Skedare/Shp�toje _Si

en: To get access to printers on remote CUPS servers in your local network you only need to turn on the "Automatically find available printers on remote machines" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s).
sq: P�r t� pranuar hyrje n� stampues t� server�ve CUPS t� larg�t, n� rrjetin tuaj, ju duhet ta nisni opcionin "Rr�mues automatik p�r stampues n� makinat e larg�ta"; serverat CUPS e informojn� automatikisht makin�n tuaj mbi stampuesit q� ai posedon. T� gjith� stampuesit e njoftur n� makin�n tuaj do t� listohet n� "Stampues t� larg�t" n� sektorin kryesor t� dritar�s Printerdrake. N�se serveri(at) (t)juaj CUPS nuk �sht�/jan� n� rrjet lokal, ju duhet ta futni adres�n IP dhe numrin e port�s p�r t� pranuar informacionet e stampuesve nga server(at).

en: %s is not in the scanner database, configure it manually?
sq: %s nuk �sht� n� baz�n e skanerve, konfiguroje manualisht?

en: Delay before booting default image
sq: Afat para se imazhi t� niset me marr�vshje

en: Restrict command line options
sq: Opcion mbrojt�s linj�n komanduese

en: East Europe
sq: Evropa Lindore

en: Use free space
sq: P�rdore hap�sir�n e lir�

en: use dhcp
sq: p�rdore dhcp

en: Mail alert
sq: Lajm alarmues

en: Internet configuration
sq: Konfigurimi i Internetit

en: Uzbekistan
sq: Uzbekistani

en: Detected %s
sq: I Zbuluar %s

en: /Autodetect _printers
sq: /Auto-zbulues _stampuesve

en: Finish
sq: P�rfundo

en: Show automatically selected packages
sq: Paraqiti automatikisht pakot e zgjedhura

en: CPU flags reported by the kernel
sq: Shenj� CPU e raportuar nga b�rthama

en: Something went wrong! - Is mkisofs installed?
sq: Di�ka e keqe ka ndodhur! - A �sht� instaluar mkisofs?

en: Please try again
sq: Ju lutemi provoni edhe nj� her�

en: The model is correct
sq: Modeli �sht� korrekt

en: FAT resizing failed: %s
sq: Ridimenzionimi i ndarjes FAT d�shtoi: %s

en: Individual package selection
sq: Zgjedhni pakot individualisht

en: This partition is not resizeable
sq: Kjo ndarje nuk mund t� ridimenzionohet

en: Location
sq: Lokalizimi

en: USA (cable-hrc)
sq: SHBA (kablo-hrc)

en: Journalised FS
sq: FS gazetaresk

en: Ethernet cards promiscuity check
sq: Kartelat ethernet me verifikim t� p�rzier

en: This machine
sq: Mbi k�t� makin�

en: DOS drive letter: %s (just a guess)
sq: Shkronja lexuese DOS: %s (vet�m sypozohet)

en: Bahrain
sq: Bahrein

en: Select the files or directories and click on 'OK'
sq: Zgjedhni skedaret apo repertor�t dhe klikoni mbi 'OK'

en: omit scsi modules
sq: mos i merr� parasysh modulet scsi

en: family of the cpu (eg: 6 for i686 class)
sq: familja e cpu (p.sh: 6 p�r klas�n i686)

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
sq: Mbasi q� ju jeni duket b�r� nj� instalim t� rrjetit (network), d.m.th.
    q� rrjeti juaj �sht� veq se i konfiguruar. Klikoni mbi Ok p�r ta konservuar
    konfigurimin tuaj, p�r ta ri-konfiguruar lidhjen internet klikoni mbi Anulo.

en: Run the daily security checks
sq: Nisi p�r gjdo dit� verifikimet e siguris�

en: Keyboard layout: %s
sq: Tipi i tastier�s: %s

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
sq: K�tu keni mund�si t� zgjedhni se n�se stampuesit e lidhur n� k�t� makin� duhet t� jen� me hyrje n� makin�n e larg�t dhe nga cila makin� e larg�t.

en: Maltese (US)
sq: Malt� (US)

en: The creation of the boot floppy has been successfully completed
sq: Krijimi i nj� diskete boot floppy �sht� kryer me sukses

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
sq: Monton dhe �monton mbar� Rrjetin e Sistemit t� Skedareve (NFS), SMB (Lan
    Manager/Windows), dhe pikat montuese NCP (NetWare).

en: Launch the wizard
sq: Ngarkoni asistentin

en: Tvcard
sq: Kartel� TV

en: Toggle between normal/expert mode
sq: Kalo mes modit normal/ekspert

en: Size
sq: Madh�sia

en: Greenland
sq: Grenlanda

en: Thursday
sq: e enjte

en: Not the correct tape label. Tape is labelled %s.
sq: Nuk �sht� nj� kaset� me etiket korrekte. Kaseta �sht� e etiketuar me %s.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
sq: Konfigurimi i shp�rndarjes s� lidhjes Internet �sht� kryer.
    Dhe �sht� i aktivizuar.
    
    �far� d�shironi t� b�ni?

en: Delete All NBIs
sq: Zhduki t� gjith� NBIs

en: This dialog allows you to fine tune your bootloader:
    
     * "%s": there are three choices for your bootloader:
    
        * "%s": if you prefer grub (text menu).
    
        * "%s": if you prefer LILO with its text menu interface.
    
        * "%s": if you prefer LILO with its graphical interface.
    
     * "%s": in most cases, you will not change the default ("%s"), but if
    you prefer, the bootloader can be installed on the second hard drive
    ("%s"), or even on a floppy disk ("%s");
    
     * "%s": after a boot or a reboot of the computer, this is the delay
    given to the user at the console to select a boot entry other than the
    default.
    
    !! Beware that if you choose not to install a bootloader (by selecting
    "%s"), you must ensure that you have a way to boot your Mandrake Linux
    system! Be sure you know what you are doing before changing any of the
    options. !!
    
    Clicking the "%s" button in this dialog will offer advanced options which
    are normally reserved for the expert user.
sq: Ky dialog mund�son q� m� n� fund ta akordoni bootloader:
    
     * "%s": ju posedoni tri mund�si p�r bootloader:
    
        * "%s": n�se ju preferoni grub me (menu tekst).
    
        * "%s": n�se ju preferoni interfac LILO me mod� teksti.
    
        * "%s": n�se ju preferoni LILO me interfac grafike.
    
     * "%s": n� shumic�n e rasteve ju nuk duhet ta nd�rroni nisjen
    e udh�zuar me marr�veshje (bootloader) ("%s"), mir�po n�se ju
    d�shironi ta b�ni, programi me nisje t� udh�zuar (bootloader), mund t�
    instalohet n� diskun e fort t� dyt� ("%s"), apo njashtu edhe n�
    disket�n floppy (floppy disk) ("%s");
    
     * "%s": kur ju e nisni kompjuterin tuaj, b�het fjal� p�r koh�n e cila i
    akordohet p�rdoruesit p�r t� nisur nj� sistem tjet�r eksploatues.
    
    !! Kujdes, n�se ju vendosni q� t� mos instaloni programin me nisje t�
    udh�zuar (bootloader duke klikuar mbi "%s"), ju duhet t� jeni i sigurt se
    posedoni nj� metod� tjet�r p�r ta nisur sistemin tuaj. Njashtu ju duhet
    t� jeni i sigurt, t� dini se �far� b�ni n�se ju i ndryshoni mund�sit e tij. !!
    
    Duke klikuar mbi kops�n "%s" n� k�t� kutij� dialogu, do t� ju
    ofrojm� shum� mund�si p�rparuese, t� cilat jan� t� rezervuara p�r ekspert.

en: if set, send the mail report to this email address else send it to root.
sq: n�se konfigurohet, d�rgoje nj� raport mail n� k�t� adres� t� e-mailit p�rdryshe d�rgoje tek administratori (root).

en: Which configuration of XFree do you want to have?
sq: Cilin konfigurim t� XFree d�shironi ta p�rdorni?

en: More
sq: M� shum�

en: This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number.
sq: Ky urdh�r p�rdore t� nj�jtin shkrim n� linj�n komanduese 'cdrecord'. 'cdrecord -scanbus' i cili njashtu do t� �faq� numrin e mjeteve.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
sq: Me k�t� nivel t� siguris�, p�rdorimi i k�saj makine sikur server, �sht� i mundur.
    Siguria �sht� e mjaftueshme p�r pranimin e nj� shume t� madhe klientash.
    Sh�nim: n�se makina juaj �sht� e kyqur si klient n� Internet ju duhet ta zgjidhni nj� nivel sigurie m� t� ul�t

en: Server Name
sq: Emri i Serverit

en: Account Password
sq: Parulla a kontos

en: %s cannot be displayed 
    . No Help entry of this type
sq: %s nuk mund t� �faqet 
    . Asnj� hyrje ndihmuese p�r k�t� tip

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
sq: Ju keni vendosur t� instaloni programin bootloader mbi nj� ndarje.
    Kjo n�nkupton se ju posedoni nj� program me nisje t� udh�zuar� n� diskun e fort (shembull: System Commander).
    
    N� cilin disk� do t� niseni?

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful: this
    operation is dangerous. If you have not already done so, you
    first need to exit the installation, run "chkdsk c:" from a
    Command Prompt under Windows (beware, running graphical program
    "scandisk" is not enough, be sure to use "chkdsk" in a
    Command Prompt!), optionally run defrag, then restart the
    installation. You should also backup your data.
    When sure, press Ok.
sq: KUJDES!
    
    DrakX tani do t� ridimenzionoj ndarjen tuaj Windows. Keni kujdes:
    ky operacion �sht� i rreziksh�m. N�se ju nuk e keni b�r�, at�her
    ju m� s� pari duhet t� dilni nga instalimi, niseni "chdsk c:" nga
    Urdh�ri Ftues nd�r Windows (kujdes, nisja grafike e programit "scandisk"
    nuk �sht� e nevojshme, duhet t� jeni i sigurt gjat� p�rdorimit t�
    "chkdsk" Urdh�rit Ftues!), me opcion niset defragmatori, the mandej
    ri-niseni instalimin. Ju duhet njashtu ti regjistroni t� dh�nat tuaja.
    Kur t� jeni i sigurt shtypni mbi Ok.

en: Tajik keyboard
sq: Tastiera Tajike

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
sq: Ju mund ta kopjoni konfigurimin e stampuesit t� krijuar p�r administrues %s n� drejtim t� qeverisjes suaj t� tanishme %s. T� gjitha t� dh�nat e konfigurimit (emri i stampuesit, p�rshkrimi, vendosja, tipi i lidhjes, dhe parametrat me marr�veshje) do t� rikuperohen, mir�po punimet nuk do t� trasferohen.
    T� gjitha rreshtimet e krijuara, nuk kan� mund�si t� trasferohen p�r k�to shkaqe:

en: Font List
sq: Lista e Polic�s

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
sq: Ndoshta ju duhet t� nd�rroni lexuesin me nisje t� udh�zuar t� Open
     Firmware, p�r ta aktivizuar programin me nisje t� udh�zuar. N�se ju
     v�reni nj� hyrje t� programit me nisje t� udh�zuar, gjat� nisjes s�
     sistemit tuaj, shtypni mbi Command-Option-O-F dhe rinisni sistemin tuaj
     futni: setenv boot-device %s,\\:tbxi. Mandej shtypni: shut-down
    N� nisjen tjet�r t� sistemit tuaj, ju do ta v�reni hyrjen e programit me nisje t� udh�zuar.

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX or some other means to boot your machine
sq: Me sa duket makina juaj posedon nj� arqitektur� t� vjet�r apo t� pa
     njoftur, programi p�r nisje t� udh�zuar yabbot nuk do t� funksionoj.
    Dhe instalimi do t� vazhdoj m� tutje, mir�po ju
     duhet t� posedoni BootX q� ta nisni sistemin tuaj

en: Select file
sq: Zgjedhe nj� skedare

en: Choose the network or host on which the local printers should be made available:
sq: Zgjedhe rrjetin apo ftuesin, se n� cilin stampues lokal duhet t� aktivizohet:

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
sq: K�ta urdh�ra ju mund ti p�rdorni edhe n� zonat "Urdh�r stampues" n� kutin� e dialogut stampues m� me shum� aplikacione. N� k�t� rast ju nuk duhet ta futni emrin e skedares sepse ajo do t� furnizohet nga i nj�jti aplikacion.

en: Japan
sq: Japonia

en: Print option list
sq: Stampoje list�n e opcionit p�r stampim

en: The change is done, but to be effective you must logout
sq: Ndryshimet jan� kryer, mir�po q� t� jen� t� gatshme ju duhet t� shk�puteni

en: Country / Region
sq: Shteti / Regjioni

en: Search servers
sq: Hulumtim i serverave

en: NCP queue name missing!
sq: Emri i rreshtit NCP mungon!

en: Warning, another internet connection has been detected, maybe using your network
sq: Kujdes, nj� lidhje tjet�r internet �sht� zbuluar, ndoshta p�rdorimi i rrjetit tuaj

en: Cd-Rom labeled "%s"
sq: Etiketim i Cd-Rom "%s"

en: CDRW media
sq: burimi CDRW

en: Saves and restores system entropy pool for higher quality random
    number generation.
sq: Regjistroni dhe riparone sistemin entropi p�r nj� prodhim m� t� mir�
    t� numrave t� rastit.

en: Turn your computer into a reliable server
sq: Kthejeni makin�n tuaj n� server t� v�rtet

en: Check empty password in /etc/shadow
sq: Verifikoje parull�n e zbrazt� n� /etc/shadow

en:  (driver %s)
sq:  (piloti %s)

en: Loopback file(s):
       %s
sq: Skedare(t) loopback:
       %s

en: I don't know
sq: Nuk e di

en: Start when requested
sq: Niseni kur k�rkohet t� niset

en: , TCP/IP host "%s", port %s
sq: , ftuesi TCP/IP "%s", porta %s

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
sq: Ju jeni duke e konfiguruar nj� disket� flopi Auto instaluese. Ky funksion �sht� tejet i rreziksh�m, dhe duhet t� jeni vigjilent.
    Me k�t� funksion ju keni mund�si ta rinisini instalimin q� e keni b�r� n� k� kompjuter, q� mund t� jen� interaktiv� me disa etapa, n� urdh�r p�r ti ndryshur vlerat e tyre.
    
    P�r nj� siguri maksimale, shp�rndarja dhe formatimi nuk do t� performohet automatikisht, pa marr� parasysh se �faqr� zgjedhje ju b�ni gjat� instalimitn� k�t� kompjuter.
    A d�shironi t� vazhdoni?

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
sq: 
    
    Kartela e juaj aktualisht e p�rdor� pilotin %s"%s" (piloti me marr�veshje �sht� "%s")

en: Post Uninstall
sq: Dezinstaloje Postin

en: Connecting to Internet
sq: Lidhje n� Internet

en: Cpuid level
sq: Nivel i Cpuid

en: Novell server "%s", printer "%s"
sq: Serveri Novell "%s", stampuesi "%s"

en: Mongolian (cyrillic)
sq: Mongolishte (qirilic�)

en: Add a module
sq: Shtoje nj� modul

en: Profile to delete:
sq: Profil p�r tu zhdukur:

en: Local measure
sq: Matje lokale

en: Warning : IP address %s is usually reserved !
sq: Kujdes : Adresa IP %s �sht� ve�se e rezervuar !

en: busmouse
sq: min bus

en: Account Login (user name)
sq: Emri i p�rdoruesit t� kontos

en: Fdiv bug
sq: Bug Fdiv

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
sq: konfiguruesi drakfirewall
    
    Ju duhet t� jeni i sigurt se e keni konfiguruar Rrjetin/Internet me
    drackconnect para se t� vazhdoni m� tutje.

en: Accept broadcasted icmp echo
sq: Pranoje transmetuesin echon icmp

en: Uruguay
sq: Uruguaji

en: Benin
sq: Benini

en: SMB/Windows server "%s", share "%s"
sq: Server SMB/Windows "%s", i ndar� "%s"

en: Path selection
sq: Zgjedhe shtegun

en: Name/IP address of host:
sq: Emri/IP adresa e ftuesit:

en: Custom & system settings
sq: Personalizim i rregullave & Dogana

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
sq: Di�ka e keqe ka ndodhur n� diskun tuaj t� fort�.
    Testi verifikues me integritet t� skedareve ka d�shtuar. 
    D.m.th. q� ju do t� jeni nj� viktim� e humbjes s� t� dh�nave rreth� e rrotull.

en: Printer host name or IP missing!
sq: Emri i ftuesit apo i IP mungon!

en: Please check all users that you want to include in your backup.
sq: Ju lutemi verifikoni t� gjith� p�rdoruesit t� cil�t d�shironi ti p�rfshini n� regjistrim.

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
sq: Skaneri %s duhet t� konfigurohet nga printerdrake.
    Ju mund ta nisni printerdrake nga Qendra Kontrolluese Mandrake n� sektorin Hardware

en: Bangladesh
sq: Bangladeshi

en: Japan (cable)
sq: Japonia (kablo)

en: Initial tests
sq: Testet inicues

en: Continue
sq: Vazhdo

en: Custom Restore
sq: Riparim i Personalizuar

en: Saturday
sq: e shtun�

en: "%s": if a sound card is detected on your system, it is displayed here.
    If you notice the sound card displayed is not the one that is actually
    present on your system, you can click on the button and choose another
    driver.
sq: "%s": n�se nj� kartel� e z�rit �sht� zbuluar n� sistemin
    tuaj, ajo do t� �faqet k�tu. N�se sh�nimet mbi kartel�n tuaj nuk jan� ato
    q� duhen t� jen�, n� sistemin tuaj, ju mund t� klikoni mbi kops�n dhe ta
    zgjedhni nj� pilot tjet�r.

en: Set the root umask.
sq: Konfiguroje umask t� administratorit.

en: Script-based
sq: Bazuar me nj� skript

en: Error reading file %s
sq: Gabim gjat� leximit t� skedares %s

en: PLL setting:
sq: Rregullimi PLL:

en: You must have a FAT partition mounted in /boot/efi
sq: Ju duhet t� posedoni nj� ndarje FAT t� montuar n� /boot/efi

en:  on
sq:  mbi

en: The URL must begin with http:// or https://
sq: URL duhet t� filloj me http:// ose https://

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
sq: N�se nuk e njifni adres�n e rrjetit, ju mund ta specifikoni menj�her� n� (URL) e cila ju mund�son t� hyni n� stampues. Zgjedheni fillimin e nj� letre dhe kompletone adres�n duke i respektuar specifikacionet CUPS apo Foomatic. Sh�noni se t� gjitha llojet e URL nuk mund t� p�rmbahen me t� gjitha qeverisjet stampuese.

en: Other OS (SunOS...)
sq: Sistem tjet�r Eksploatues (SunOS...)

en: Install/Upgrade
sq: Instalo/Azhurno

en: %d packages
sq: %d pakot

en: Costa Rica
sq: Kosta Rika

en: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Backup and Restore application
    
    --default             : save default directories.
    --debug               : show all debug messages.
    --show-conf           : list of files or directories to backup.
    --config-info         : explain configuration file options (for non-X users).
    --daemon              : use daemon configuration. 
    --help                : show this message.
    --version             : show version number.
sq: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Regjistroje dhe Rregulloje aplikacionin
    
    --default             : shp�toi repertor�r me marr�veshje.
    --debug               : �faqi t� gjitha lajmet debug.
    --show-conf           : listoi skedaret apo repertor�t p�r regjistrim.
    --config-info         : shpjegoje konfigurimin e mund�sive p�r skedare (p�r p�rdoruesit jo-X).
    --daemon              : p�rdore konfigurimin daemon. 
    --help                : �faqe k�t� lajm.
    --version             : �faqe numrin e versionit.

en: Domain Authentication Required
sq: Nevojitet Prona V�rtetuese

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
sq: 
    
     Faleminderim:
    	- LTSP Projekti http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: Use libsafe for servers
sq: P�rdoroje libsafe p�r server

en: Icelandic
sq: Islandisht

en: 
    Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]
sq: 
    P�rdorim: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]

en: Maximum size
     allowed for Drakbackup (MB)
sq: Madh�sia maksimale
     e lejuar p�r Drakbackup (Mb)

en: Circular mounts %s
sq: Pika montuese cirkulare %s

en: Lilo/grub mode
sq: Mod� Lilo/grub

en: Martinique
sq: Martinika

en: Old user list:
sq: Lista e p�rdoruesit t� vjet�r:

en: Search Backups
sq: Hulumtim i Backups

en: a number
sq: nj� num�r

en: Swedish
sq: Suedisht

note: -PO: the %s is the driver type (scsi, network, sound,...)
en: Which %s driver should I try?
sq: Cilin pilot %s duhet ta provoj?

en: You will receive an alert if one of the selected services is no longer running
sq: Ju do t� pranoni nj� alert n�se nj�ra nga serviset e zgjedhura nuk funksionojn�m�

en: Weekday
sq: Gjdo jav�

en: Filesystem types:
sq: Tipet e sistemeve t� skedareve:

en: Northern Mariana Islands
sq: Ishujt Mariane t� Veriut

en: , multi-function device on HP JetDirect
sq: , periferik HP JetDirect multi-funksion

en: none
sq: asnj�

en: Name of the profile to create (the new profile is created as a copy of the current one) :
sq: Em�r i profilit p�r tu krijuar (profili i ri �sht� krijuar si nj� kopje nga nj� aktuale) :

en: Floppy
sq: Disket� Floppy

en:         - Maintain /etc/exports:
            		Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
            		sets up the correct entry to allow anonymous access to the root filesystem from
            		diskless clients.
    
            		A typical exports entry for clusternfs is:
            		
            		/                  (ro,all_squash)
            		/home              SUBNET/MASK(rw,root_squash)
    			
    			With SUBNET/MASK being defined for your network.
sq:         - Mir�mbajtja /etc/exports:
            		Clusternfs lejon exportimin e sistemit t� sekdareve root dhe t� klientave n� disk m� t� vog�l. drakTermServ
            		rregullon dhe korigjon hyrjet e lejuara anonime n� sistemin e skedareve root nga
            		klientat me disk m� t� vog�l.
    
            		Exportime tipike me hyrje p�r clusternfs jan�:
            		
            		/                  (ro,all_squash)
            		/home              ND�R-RRJET/MASKUAR(rw,root_squash)
    			
    			Me ND�R-RRJET/MASKUAR p�rcaktohet rrjeti i juaj (network).

en: Ghostscript referencing
sq: N�nshkruarje n� Ghostscript

en: Authorize all services controlled by tcp_wrappers
sq: Autorizoi t� gjitha sh�rbimet e kontroluara nga tcp_wrappers

en: Move
sq: Zhvendose

en: Bootloader to use
sq: Programi Bootloader p�r p�rdorim

en: SMB server host
sq: Ftuesi server SMB

en: Name Servers:
sq: Emrat e Serverav�:

en: Minute
sq: Minut�

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
sq: 
    Kujdes
    
    Ju lutemi lexone me v�mendje dokumentin e prezentuar. N� rats se nuk
    pajtoheni me t�, ju nuk do jeni i detyruar t'instaloni cd-rom(et)
    me radh�. N� k�t� rast, Klikoni mbi kops�n 'Refuzo' p�r t� vazhduar
    instalimin pas k�to media.
    
    
    Disa prej komponimeve t� p�rmbajtura n� CD-met e ardhshme, nuk jan�
    nd�r licencat e GPL apo di�ka t� till�, q� nuk mund�son kopjimin apo
    ndryshimin e t� dh�nave. Secili komponent i programeve �sht� i shp�rndar�
    nd�r termet e licenc�s s� tij personale. A keni d�shir� q� t� referoheni
    dhe ti n�nshtroheni para se t'instaloni apo ti shp�rndani. Zakonisht, k�to
    licenca nuk autorizojn� kopjimin e (p�rveq regjistrimit t� tyre),
    shp�rdarjeve, dekompilimit, shp�rb�rjen, inxhinierim t� mbrap�m dhe
    ndryshimin i programeve n� t� cil�t p�rputhen. T� gjitha kund�rshtimet
    me termet e licenc�s aplikuese, shtyn� kah prishja e kontrat�s, pa
    kurr�far kund�rshtimi dhe �far�do t� drejte tjet�r, apo akcioni nga ana e juaj.
    Vet�m n�se kushti i licenc�s, ju autorizon nj� gj� t� till�, ju nuk mund
    t'instaloni ato programe, n� ndonji kompjuter tjet�r (d.m.th vet�m n� nj�
    kompjuter), apo ti adaptoni programet p�r nj� p�rdorim n� rrjet. Rasti
    i fundit, kontaktoni shp�rndar�sin (shit�sin) e programit p�r ta pranuar
    licenc�n. Shp�rndarja e nj� pjese t� kopive t� programeve, apo t�
    dokumnetacionit, i cili gjindet n� to, nuk lejohet.
    
    T� gjitha t� drejtat, titujt dhe r�nd�sit e k�tyre programeve jan�
    pron�sia n� ekskluzivitet t� autor�ve t� tyre, dhe njashtu jan� t�
    mbrojtur nga titujt, t� drejtat intelektuale, dhe drejt� botimi aplikues
    i programeve.

en: /_Expert mode
sq: /_Mod� ekspert

en: Remove this printer from Star Office/OpenOffice.org/GIMP
sq: Zhduke k�t� stampues nga Star Office/OpenOffice.org/GIMP

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
sq: Linux Virtual Server, p�doret p�r nd�rtimin e nj� serveri me
    p�rpar�si-t�-lart� dhe tejet-t�-lart�

en: Micronesia
sq: Mikronezia

en: 4 billion colors (32 bits)
sq: 4 miliard ngjyra (32 bits)

en: License
sq: Licenca

en: This may take a moment to generate the keys.
sq: P�r prodhimin e �el�save nevojitet nj� koh� e gjat�.

en: Here, you can setup the security level and administrator of your machine.
    
    
    The Security Administrator is the one who will receive security alerts if the
    'Security Alerts' option is set. It can be a username or an email.
    
    
    The Security Level menu allows you to select one of the six preconfigured security levels
    provided with msec. These levels range from poor security and ease of use, to
    paranoid config, suitable for very sensitive server applications:
    
    
    <span foreground="royalblue3">Poor</span>: This is a totally unsafe but very
    easy to use security level. It should only be used for machines not connected to
    any network and that are not accessible to everybody.
    
    
    <span foreground="royalblue3">Standard</span>: This is the standard security
    recommended for a computer that will be used to connect to the Internet as a
    client.
    
    
    <span foreground="royalblue3">High</span>: There are already some
    restrictions, and more automatic checks are run every night.
    
    
    <span foreground="royalblue3">Higher</span>: The security is now high enough
    to use the system as a server which can accept connections from many clients. If
    your machine is only a client on the Internet, you should choose a lower level.
    
    
    <span foreground="royalblue3">Paranoid</span>: This is similar to the previous
    level, but the system is entirely closed and security features are at their
    maximum
sq: K�tu, ju keni mund�si ta rregulloni nivelin e siguris� dhe t� administratorit n� makin� tuaj.
    
    
    Seguria Administrator �sht� ajo a cila do t� pranoj alertat e siguris� n�se opcioni 'Alertat e Seguris�'
    �sht� i rregulluar. Q� mund t� jet� emri i p�rdoruesit apo emaili.
    
    
    Menyja e Nivelit t� Siguris� mund�son zgjedhjen nj�r�n nga gjasht� t� parakonfiguruarat siguria
    pajiset me msec. K�to nivele rreshtohen nga siguria e varf�r dhe p�rdorimi i thjesht, n�
    konfigurim paranojak, tabela vijuese p�r aplikacione t� ndieshme n� servera:
    
    
    <span foreground="royalblue3">Varf�r</span>: Ky �sht� nj� nivel tejet i leht� dhe i pa sigurt.
    Duhet t� p�rdoret vet�m me kompjuter q� nuk lidhen fare n� internet apo
    n� ndonji rrjet tjet�r dhe q� nuk ka hyrje p�r p�rdorues t� tjer�.
    
    
    <span foreground="royalblue3">Standard</span>: Ky �sht� nj� nivel i siguris� standard
    rekomandohet p�r kompjuter t� cil�t lidhen n� Internet sikur nj�
    klient.
    
    
    <span foreground="royalblue3">Lart�</span>: K�tu jan� veqse disa
    rregulla, dhe verifikime automatike q� nisen gjdo nat�.
    
    
    <span foreground="royalblue3">M� Lart�</span>: Siguria tani �sht� mjaft e lart� p�r
    ta p�rdorur sistemin tuaj sikur server i cili mund t� pranoj lidhje nga shum� klienta tjer�. Dhe n�se
    makina e juaj �sht� vet�m nj� klient n� Internet, ju duhet ta zgjedhni nj� nivel m� t� ult�.
    
    
    <span foreground="royalblue3">Paranojak</span>: Ky �sht� nivel i nj�jt� me nivelin e kaluar,
    mir�po ky sistem �sht� i mbyllur kompletisht dhe siguria do t� jet� n�
    maksimum

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
sq: Auto-zbuluesi p�r Stampues (Lokal, n� rrjet dhe SMB stampues)

en: Sagem (using pppoa) usb
sq: Sagem (duke p�rdorur pppoa) usb

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
sq: Nj� gabim �sht� paraqitur - asnj� periferik i vlefsh�m s'�sht� gjetuar p�r t� krijuar ndarje t� reja. Verifikoni materialin tuaj p�r k�to ngat�rrime

en: Starting the printing system at boot time
sq: Nisja e sistemit stampues, n� nisje t� udh�zuar

en: Do you want to start the connection at boot?
sq: A d�shironi t� lidheni n� internet gjat� nisjet s� sistemit tuaj?

en: Processor ID
sq: Procesori ID

en: Sound trouble shooting
sq: Telashe gjate ndaljes s� kartel�s s� z�rit

en: Polish (qwerty layout)
sq: Polonishte (qwerty)

en: /_Add Printer
sq: /_Shtoje nj� Stampues

en: 
    Drakbackup activities via CD:
sq: 
    aktivitet Drakbackup mes CD-ve:

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
sq: Ju jeni n� pik�n e instalimit t� sistemit stampues %s n� nj� sistem n� t� cilin niveli i siguris� �sht� i rregulluar n� %s.
    
    Ky sistem i stampimit nis� gjithnj� rrjetin q� m� n� fund t� mund ti p�rgjigjet k�rksave shtyp�se. Kjo b�het me ndihm�n e procesuesit (daemon) i cili sillet n� pik�n e fundit dhe ka hyrje p�r makina t� tjera t� rrjetit. D.m.th. �sht� shenj� e mundur p�r sulme eventuale nga rrjeti. Dhe p�r at� ar�sye duhet t� niset nj� minimum i mundur me marr�veshje t� k�tij niveli t� siguris�.
    
    A me t� v�rtet d�shironi ta instaloni nj� sistem stampimi?

en: Host "%s", port %s
sq: Ftues "%s", porta %s

en: This partition can't be used for loopback
sq: Kjo ndarje nuk mund t� p�rdoret p�r loopback

en: File already exists. Use it?
sq: Skedarje �sht� veqse prezente. P�rdoreni at�?

en: received:
sq: pranuar:

en: Right Alt key
sq: �el�si Alt djathtas

en: the list of alternative drivers for this sound card
sq: lista e pilot�ve t� tjer� alternativ p�r k�t� kartel� t� z�rit

en: Gateway
sq: Port� hyr�se

en: Tunisia
sq: Tunizia

en: Scanner sharing
sq: Shp�rndarja e Skanerit

en: Profile:
sq: Profil:

en: Click on a device in the left tree in order to display its information here.
sq: Kliko n� nj� mjet n� an�n e majt� t� drurit, n� urdh�r p�r t� paraqitur informacionin e tij k�tu.

en: Allow/Forbid autologin.
sq: Mund�so/Ndalo lidhje-automatike (autologin).

en: XawTV isn't installed!
sq: XawTV nuk �sht� i instaluar!

en: Do not include critical files (passwd, group, fstab)
sq: Mos i p�rfshij� skedaret kritike (passwd, group, fstab)

en: old static device name used in dev package
sq: em�r i vjet�r i periferikut statik t� p�rdorur n� pakon dev

en: Enable the logging of IPv4 strange packets
sq: Aktivizoje logging e IPv4 n� pakot e huaja

en: This label is already used
sq: Kjo etiket� �sht� n� p�rdorim e sip�r

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
sq: 
    Mir�sevini n� Asistentin p�r Konfigurimin e Stampuesit
    
    Ky asistent do t� ju ndihmoj� q� ta instaloni stampuesin(t) tuaj t� lidhur n� k�t� kompjuter apo n� direkt n� rrjet.
    
    N�se e keni lidhur nj� stampues n� k�t� kompjuter, ju lutemi kyqni at�/ata k�t� kompjuter ndizni at�/ata, q� m� n� fund ai/ata t� zbulohen automatikisht. Njashtu edhe p�r stampuesit n� rrjet duhet t� jen� t� lidhur dhe t� ndezur.
    Sh�nim se auto-zbuluesit t� stampuesve n� rrjet, i nevojitet koh� m� e gjat�, se sa tek ata lokal, pra ju mund ti dezaktivizoni n�se ju nuk keni nevoj� p�r ta.
    
    Klikoni mbi "Tjetri" kur ju jeni gati, dhe mbi "Anulo" n�se ju, nuk d�shironi ta konfiguroni stampuesin(t).

en: Greek (polytonic)
sq: Grek� (polytonic)

en: After formatting partition %s, all data on this partition will be lost
sq: Mbas formatimit t� ndarjes %s, t� gjitha t� dh�nat n� k�t� ndarje do t� zhduken

en: Connection Time:
sq: Koha e Lidhjes:

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
sq: Ju lutemi futni Cd-Rom n� lexuesin tuaj, dhe shtypni mbi Ok kur jeni gati.
    N�se ju nuk e posedoni at�, klikoni mbi Anulo p�r ta ndalur ngritjen e postit.

en: Use group id for execution
sq: P�rdore identitetin e grupit p�r ekzekutim

en: Choose the default user:
sq: Zgjedheni nj� p�rdorues me marr�veshje:

en: Gabon
sq: Gaboni

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
sq: 
    N�se e p�rdorni nj� server CUPS t� larg�t, ju nuk keni nevoj� ta konfiguroni stampuesin k�tu; ai do t� zbulohet automatikisht.

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
sq: Mandrake Linux mund ti p�rmbahen nj� num�r t� madh� t� gjuh�ve.
    Zgjedheni gjuh�n n� t� cil�n d�shironi ta instaloni. E cila do t�
    jet� n� p�rdorim e sip�r kur ta instaloni kompletisht
    dhe ta rinisni sistemin tuaj nga fillimi.

en: Directory (or module) to put the backup on this host.
sq: Repertori (apo moduli) p�r ta futur backup n� k�t� ftues.

en: Domain
sq: Prona

en: Precise RAM size if needed (found %d MB)
sq: Precizoje madh�sin� e memoris� n�se ajo nevojitet (%d MB t� gjetura)

en: LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally
    automated. DrakX will analyze the disk boot sector and act according to
    what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. This way you will be able to load either GNU/Linux or another
    OS.
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If it cannot make a determination, DrakX will ask you where to place the
    bootloader.
sq: LILO dhe grub jan� bootloader p�r GNU/Linux. Normalisht, kjo etap� �sht�
    kompletisht e automatizuar. DrakX do t� analizoj sektorin e diskut nis�s
    boot dhe do t� akordoj gjdo gj� q� gjindet n� t�:
    
     * n�se nj� sektor nis�s boot Windows zbulohet, ai do t� z�vend�sohet me
    me nj� sektor nis�s boot grub/LILO. N� k�t� rrug� ju do t� keni mund�si
    t� ngarkoni qoft GNU/Linux apo ndonji Sistem tjet�r Eksploatues.
    
     * n�se nj� sektor nis�s boot LILO zbulohet, ai do t� z�vend�sohet me
    nj� sektor t� ri.
    
    N�se ai nuk mund t� p�rcaktohet, DrakX do t� ju pyes p�r vendin se ku
    deshironi ta vendosni bootloader.

en: Provider dns 2 (optional)
sq: DNS i dyt� furnizues (opcional)

en: Boot device
sq: Mjet me nisje udh�zuese

en: Which partition do you want to resize?
sq: Cil�n ndarje d�shironi ta ridimenziononi?

en: United States Minor Outlying Islands
sq: Ishujt Minore t� Shteteve t� Bashkuara

en: Djibouti
sq: Gjibuti

en: A tool to monitor your logs
sq: Nj� veg�l p�r t� shiquar skedaret zhurnale

en: detected on port %s
sq: zbuluar n� p�rt�n %s

en: Graphics card: %s
sq: Kartel� grafike: %s

en: /Set as _Default
sq: /Paraqite sikur me _Marr�veshje

en: Accept icmp echo
sq: Pranoje echon icmp

en: Logitech CC Series with Wheel emulation
sq: Logitech CC Serijalet me rrot� imituese

en: Splash selection
sq: Zgjedh�s i mazhit

en: Extended partition not supported on this platform
sq: Ndarjet e zgjatura nuk p�rkrahen n� k�t� plat�form�

en: ISDN Configuration
sq: Konfigurimi ISDN

en: high
sq: lart�

en: Internet Connection Sharing
sq: Shp�rndarja e Lidhjes Internet

en: Choose file
sq: Zgjedhe skedaren

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
sq: Kujdes! Nj� konfigurim i Murit t� Zjarrt� ekziston. Ndoshta ju duhet ta ndryshoni konfigurimin n� menyr� manuale mbas� instalimit.

en: Printing/Photo Card Access on "%s"
sq: Stampimi/Hyrjet e Kartelave Fotografike n� "%s"

en: Daily security check
sq: Verifikim i siguris� ditor

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
sq: A d�shironi t� lejoni stampim mbi k�ta stampues, apo mbi ata t� rrjetit lokal?

en: Printer default settings
sq: Konfigurimet marr�vesh�se t� stampuesit

en: the WP flag in the CR0 register of the cpu enforce write proctection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)
sq: shenjat WP n� regjistruesin CR0 t� cpu forcojn� mbrojtjen e shkruarjes n� nivelin e faq�s s� memoris�, k�ta i mund�sojn� procesorve njoftime mbi hyrjet n� b�rthamat e pa verifikuara t� p�rdoruesve t� memoris� (aka ky �sht� nj� mbrojt�s bug)

en: Generic PS2 Wheel Mouse
sq: Mini standard PS2 me Rrot�

en: Removing old printer "%s"...
sq: Zhdukja e stampuesit t� vjet�r "%s"...

en: Select a device !
sq: Zgjedhe nj� mjet !

en: Remove selected server
sq: Zhduke serverin e zgjedhur

en: Sagem (using dhcp) usb
sq: Sagem (duke p�rdorur dhcp) usb

en: French Southern Territories
sq: Teritorit Franqez Jugor

en: the vendor name of the processor
sq: emri i shit�sit t� k�tij procesori

en: All data on this partition should be backed-up
sq: T� gjitha t� dh�nat duhet t� jen� t� regjistruara

en: Installing package %s
sq: Instalimi i pakove %s

en: Checking device and configuring HPOJ...
sq: Verifikimi i mjetit dhe konfigurimi i HPOJ...

en: To have more partitions, please delete one to be able to create an extended partition
sq: P�r t� p�rdorur ndarje tjera, ju duhet ta zhdukni nj�r�n nga to, q� ta z�vend�soni me nj� ndarje tjet�r t� shtrir�

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
sq: Stampuesi i juaj HP �sht� konfiguruar automatikisht, p�r t� ju mund�suar hyrjen n� t� dh�nat e lexues�ve n� kartel�n e memoris� nga kompjuteri i juaj. Tani ju mund hyni n� kartelat tuaja duke p�rdorur programin grafik "MtoolsFM" (Menu: "Aplikacionet" -> "Vegla t� Skedareve" -> "Administrues i Skedareve MTools") apo programin n� linj�n komanduese "mtools" (futni "man mtools" n� linj�n komanduse p�r me shum� informacione). Ju do t� hyni n� kartel� n� an�n e lexuesit duke poseduar shkronj�n "p:", apo nj� shkronj� tjet�r n�se ju posedoni nj� aparat tjet�r i t� nj�jtit tip. N� "MtoolsFM" ju mund t� kyqeni mes lexues�ve t� shumt�, me ndihm�n e zonave, n� k�ndin e lart�, dhe n� an�n e djatht� t� list�s s� skedareve.

en: Choose packages to install
sq: Zgjedhi pakot instaluese

en: ALL existing partitions and their data will be lost on drive %s
sq: T� gjitha shp�rndarjet dhe t� dh�nat n� disqe to do t� zhduken %s

en: Your system does not have enough space left for installation or upgrade (%d > %d)
sq: Sistemi juaj nuk posedon hap�sir� t� mjaftueshme p�r instalim, apo azhurnim (%d> %d)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
sq: Gjdo stampuesi i nevojitet nj� em�r (p�r shembull "stampues"). P�rshkrimi dhe Lokalizimi e zonave nuk ka nevoj� t� mbushet. Jan� komente t� thjeshta p�r p�rdorues.

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to setup a new printer. The interface presented there is
    similar to the one used during installation.
sq: "%s": duke klikuar mbi kops�n "%s" e cila do t� hap� asistentin
    konfigurues. Konsultoni kapitujt e caktuar t� ``P�rcjell�sit Nis�s''
    p�r m� shum� informacione se si t� konfigurohet nj� stampues i ri.
    Interfaci i prezentuar, �sht� i nj�jt� me at� gjat� instalimit.

en: Network interface
sq: Interfac rrjeti

en: Disconnection from Internet failed.
sq: Shk�putja nga Inteneti d�shtoi.

en: Reading printer data...
sq: Lexim i t� dh�nave t� stampuesit...

en: Korean keyboard
sq: Tastiere Koreane

en: Not connected
sq: Nuk �sht� lidhur

en: Greek
sq: Greqisht�

en: Saint Kitts and Nevis
sq: Saint Kitts dhe Nevis

en: Generic 3 Button Mouse with Wheel emulation
sq: Mini satandard me 3 Kopsa dhe rrot� imituese

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
sq: Transferim i suksesh�m
    Ju mund ta verifikoni parull�n tuaj n� k�t� server me:
    
    ssh -i %s %s\@%s
    
    pa paraqitjen e k�rkes�s p�r t�.

en: Enable OF Boot?
sq: Autorizoje Nisjen n� l'OF?

en: You can't use JFS for partitions smaller than 16MB
sq: Ju nuk mund t� p�rdorni JFS p�r ndarjet m� t� vogla se 16MB

en: Erase your RW media (1st Session)
sq: Zhdukni burimin e RW (Sesionit t� 1-r�)

en: Monitor VertRefresh: %s
sq: Frekuenc� Vertikale Freskuese: %s

en: Mount point
sq: Pik� montuese

en: An error occurred:
    %s
    Try to change some parameters
sq: Nj� gabim �sht� paraqitur:
    %s
    Nd�rroni parametrat p�r ta p�rmir�suar

en: TCP/IP host "%s", port %s
sq: Ftuesi TCP/IP "%s", porta %s

en: User :
sq: P�rdorues :

en: Restore system
sq: Riparoje sistemin

en: These are the machines on which the locally connected scanner(s) should be available:
sq: K�to jan� makinat n� t� cilat skenar�t lokal lidhen dhe duhet t� jen� t� aktivizuar:

en: The DHCP end ip
sq: DHCP p�rfundim i ip

en: Another one
sq: Nj� tjet�r

en: Colombia
sq: Kolumbia

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
sq: Konfigurimi i tanish�m i `%s':
    
    Rrjeti: %s
    Adresa IP: %s
    Kushtimi i IP: %s
    Piloti: %s

en: Reunion
sq: Ishujt e bashkuar

en: Details
sq: Detajet

en: For security reasons, it will be disconnected now.
sq: P�r ar�sy sigurie, do t� shk�putet tani nga rrjeti.

en: Synchronization tool
sq: Veg�l sinkronizuese

en: Checking your system...
sq: Verifikimi i sistemit tuaj...

en: Print
sq: Stampo

en: Insert the tape with volume label %s
     in the tape drive device %s
sq: Futni kaset�n me etiket�n e v�llimit %s
     n� lexuesin e kaset�s %s.

en: Mounted
sq: Montuar

en: Configure CUPS
sq: Konfigurim i CUPS

en: Graphical Interface
sq: Interfac Grafik�

en: Restore Users
sq: Riparoi P�rdoruesit

en: Encryption key for %s
sq: �el�s i kriptuar p�r %s

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
sq: portmapper qeveris� kyqjen RPC e cila p�rdoret n� serveret sikur NFS
    dhe NIS. Serveri portmap duhet t� niset n� makinat
    q� e luajn� rolin e nj� serveri p�r protokol me nj� mekaniz�m RPC.

en: Detected hardware
sq: Materiali i zbuluar

en: Mauritius
sq: Mauritiusi

en: Enabling swap partition %s
sq: Aktivizimi i ndarjes swap %s

en: There is no FAT partition to use as loopback (or not enough space left)
sq: Asnj� ndarje FAT p�r ta p�rdorur sikur loopback (ose nuk ka hap�sir� t� mjaftueshme)

en: Armenian (old)
sq: Armenishte (vjet�r)

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
sq: Nj� stampues i emruar "%s" ekziston ve�se nd�r %s.
    Kliko mbi "Transfero" p�r ta z�vend�suar.
    Ju keni mund�si njashtu t� futni nj� em�r t� ri ose thjesht� injorone k�t� etap�.

en: Find the solutions of your problems via MandrakeSoft's online support platform.
sq: Gjeni zgjidhjet e problemeve tuaja n�p�rmjet MandrakeSoft n� linj� me p�rkrahje t� plat�-form�s

en: , host "%s", port %s
sq: , ftues "%s", porta %s

en: Monaco
sq: Monako

en: Partitioning failed: %s
sq: Shp�rndarja d�shtoi: %s

en: %s formatting of %s failed
sq: formatimi i form�s %s n� form�n %s d�shtoj

en: Canada (cable)
sq: Kanada (kablo)

en: Floppy creation completed
sq: U kompletua krijimi floppy

en: Upgrade
sq: Azhurno

en: Workstation
sq: Stacion punues

en: Installing package %s
    %d%%
sq: Instalimi i pakove %s
    %d%%

en: Kyrgyzstan
sq: Kirgistani

en: Multi-function device on USB
sq: Periferik multi-funksionel n� USB

en: With basic documentation
sq: Me dokumentacion bazues

en: Anacron is a periodic command scheduler.
sq: Anacron ekzekuton urdh�rat ditor� n� m�nyr� periodike.

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
sq: Ju duhet t� posedoni nj� ndarje rr�nj�zore (root).
    P�r k�t�, krijoni nj� ndarje (apo klikoni mbi nj� q� ekziston).
    Dhe mandej klikoni mbi akcionin ``Pik� montuese'' dhe zgjedheni `/'

en: Western Sahara
sq: Sahara P�rendimore

en: Proxy should be http://...
sq: Sintakasa duhet t� jet� http://...

en: South Africa
sq: Afrik�s Jugore

en: Eject tape after the backup
sq: Nxirreni kaset�n mbas backup

en: Etherboot Floppy/ISO
sq: Disketa/ISO Etherboot

en: Modify printer configuration
sq: Ndryshoje konfigurmin e stampuesit

en: Choose a partition
sq: Zgjedheni nj� ndarje

en: Edit current rule
sq: Boto rregull�n aktuale

en: Please test the mouse
sq: Ju lutemi testone minin

en: Do not update inode access times on this file system
    (e.g, for faster access on the news spool to speed up news servers).
sq: Mos i azhurno shenj�zat hyr�se t� koh�s n� k�t� sistem t� skedares
    (p.sh. p�r hyrje m� t� shpejt n� nj� lajm� bobinues p�r ta rritur shp�jt�sin� e serverav).

en: 3 buttons with Wheel emulation
sq: 3 Kopsa me Rrot� Imituese

en: Other Media
sq: Tjet�r P�rkrahje

en: Backup system files
sq: Regjistrimi i sistemeve me skedare

en: Sector
sq: Sektori

en: Qatar
sq: Katar

en: LDAP Base dn
sq: Rr�nja Baz� (dn) LDAP

en: You can't select this package as there is not enough space left to install it
sq: Nu nuk mund ta zgjidhni k�t� pako, sepse nuk ka vend t� mjaftuesh�m p�r ta instaluar

en: generate auto-install floppy
sq: krijo nj� disket� floppy auto instaluese

en: Dialing mode
sq: Mod� Num�rimi

en: File sharing
sq: Shp�rndarja e Skedareve

en: Clean /tmp at each boot
sq: Zbraze repertorin /tmp n� �do nisje

en: Malawi
sq: Malevia

en: local config: false
sq: konfigurim lokale: i pa sakt�

en: System settings
sq: Rregullimet e sistemit

en: Please choose your type of mouse.
sq: Ju lutemi zgjedheni tipin e minit tuaj.

en: class of hardware device
sq: klas� e materialit hardver

en: These are the machines and networks on which the locally connected printer(s) should be available:
sq: K�tu jan� makinat dhe rrjetet n� cil�t stampuesit lokal lidhen dhe duhet t� jan� t� aktivizuar:

en: United Kingdom
sq: Mbret�ria e Bashkuar (UK)

en: running
sq: n� punim e sip�r

en: Indonesia
sq: Indonezia

en: default
sq: marr�veshje

en: France [SECAM]
sq: Franca [SECAM]

en: must have
sq: duhet pa tjet�r

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
sq: CUPS nuk p�rkrah� stampues n� serverin Novell njashtu edhe stampimet n� drejtim t� urdh�rave shell.

en: Senegal
sq: Senegali

en: Command line
sq: Urdh�r linje

en: Our full range of Linux solutions, as well as special offers on products and other "goodies", are available on our e-store:
sq: Hyni n� bashk�sin� e zgjedhjeve t� Linux-it, p�rfitoni oferta eksluzive mbi produktet tona dhe "goodies," t� tjera q� jan� t� lira n� linj�n e shitor�s ton� n� web.

en: March
sq: mars

en: access to administrative files
sq: hyrje n� skedaret administrative

en: Error during sendmail.
      Your report mail was not sent.
      Please configure sendmail
sq: Gabim gjat� d�rgimit t� nj� letre.
     Raporti juaj nuk �sht� d�rguar.
     Ju lutemi konfigurone d�rguesin e letrave

en: Do not allow set-user-identifier or set-group-identifier
    bits to take effect. (This seems safe, but is in fact rather unsafe if you
    have suidperl(1) installed.)
sq: Mos u mund�so set-user-identifier apo set-group-identifier
    q� t� marrin efekte. (Kjo �sht� m� e sigurt, mir�po n� disa raste mund
    t� jet� e pa sigurt, n�se e keni t� instaluar suidperl(1).)

en: Montserrat
sq: Montserati

en: Automatic dependencies
sq: Mvar�sit Automatike

en: Custom settings
sq: Personalizim i rregullimeve

en: Restore Other
sq: Riparoi t� Tjer�t

en: TV card
sq: Kartel� TV

en: Printer on SMB/Windows 95/98/NT server
sq: Stampuesi n� server SMB/Windows 95/98/NT

en: /_Configure CUPS
sq: /_Konfigurim i CUPS

en: Remove selected host/network
sq: Zhduke t� zgjedhurin ftus/rrjet

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
sq: Postfix �sht� nj� agjent trasnportues i letrave (Mail Transport Agent), i cili mund�son shk�mbimin e letrave elektronike mes makinave.

en: Uzbek (cyrillic)
sq: Uzbek (qirilic�)

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
sq: K�tu ju mund ta zgjidhni �el�sin apo kombinimin i cili
    ka mund�si t� kaloj� n� tipe t� ndryshme t� tastierave
    (shembull: mes latin dhe jo latin)

en: Network Hotplugging
sq: Rrjet (Network) i Prizuar

en: if set to yes, reports check result to tty.
sq: n�se konfigurohet me po, verifikoji rezultatet e raporteve n� tty.

en: Restore From CD
sq: Riparoje Nga CD

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
sq: Ju jeni duke konfiguruar kompjuterin tuaj, n� shp�rndarjen e lidhjes Internetit.
    Me k�t� ve�ori, kompjuterat e tjer� n� rrjetin tuaj lokal, kan� mund�si ta p�rdorin k�t� lidhje Interneti nga ky kompjuter.
    
    Sigurohuni se ju e keni konfiguruar hyrjen tuaj n� Rrjetin/Internet duke p�rdorur drakconnect, para se t� vazhdoni m� tutje.
    
    Sh�nim: ju keni nevoj� p�r nj� Rrjet t� P�rshtatur dhe t� dedikuar p�r rregullimin e Zon�s s� Rrjetit Lokal (LAN).

en: Please choose which network adapter you want to use to connect to Internet.
sq: Ju lutemi zgjedheni kartel�n e rrjetit e cila do t� lidhet n� Internet.

en: Photo memory card access on your HP multi-function device
sq: Memoria fotografike me kartel� hyr�se n� mjetin tuaj multi-funksionues HP

en: Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux
sq: Punuesit e rinj� d�rgojn� kontributin e tyre p�r t� zhvilluar zgjedhjet profesionale q� p�rpythen me Mandrake Linux.

en: Authors:
sq: Autor�t:

en: Internet Connection Sharing is now disabled.
sq: Shp�rndarja e lidhjes Internet �sht� dezaktivizuar tani.

en: if set to yes, verify checksum of the suid/sgid files.
sq: n�se konfigurohet me po, verifikoni p�rmbajtjen shum�s e skedareve suid/sgid.

en: Latin American
sq: Latino-Amerikane

en: Japanese text printing mode
sq: Mod� stampues me tekst Japonez

en: Old device file
sq: Skedare e vjet�r periferiku

en: Info:
sq: Informacion:

en: Button `%s': %s
sq: Kopsa `%s': %s

en: Please wait
sq: Nj� moment ju lutemi

en: None
sq: Asnj�ri

en: The entered IP is not correct.
sq: Hyrja IP nuk �sht� e sakt�.

en: Please be sure that the cron daemon is included in your services.
sq: Ju lutemi sigurohuni se daemon cron �sht� i p�rfshir n� serviset tuaja.

en: Ethernet Card
sq: Kartela ethernet

en: Delete selected printer
sq: Zhduke stampuesin e zgjedhur

en: Info
sq: Informacion

en: Install
sq: Instalim

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to stop this operation without losing any data and
    partitions present on this hard drive.
sq: Klikoni mbi "%s" n�se ju d�shironi ti zhdukni t� dh�nat dhe ndarjet n�
    diskun tuaj t� fort. Keni kujdes, mbasi q� t� klikoni mbi "%s", ju nuk
    keni mundesi ti rikuperoni t� dhenat dhe ndarjet prezente n� k�t� disk t�
    fort, njashtu edhe n�se gjindet ndonji ndarje, me t� dh�na Windows.
    
    Klikoni mbi "%s" q� ta ndalni k�t� operacion, pa i humbur t� dh�nat
    dhe ndarjet prezente n� k�t� disk t� fort.

en: Exit install
sq: Fundi i instalimit

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
sq: Gjdo gj� �sht� konfiguruar.
    Ju mund ta shp�ndani lidhjen tuaj t� internetit me kompjuter t� tjer�, n� Zon�n e Rrjetit Lokal, duke p�rdorur nj� konfigurim automatik t� rrjetit (DHCP).

en: Remote CUPS server
sq: Server i larg�t CUPS

en: Sun - Mouse
sq: Sun - Mini

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
sq: Vet�m nj� kartel� rrjeti �sht� konfiguruar nj� sistemin tuaj:
    
    %s
    
    Do ta konfiguroj kartel�n tuaj t� Zon�s s� Rrjetit Lokal me k�t� p�rshtat�s.

en: Minimal install
sq: Instalim minimal

en: Ethiopia
sq: Etiopia

en: Enable "crontab" and "at" for users
sq: Aktivizoje "crontab" dhe "at" p�r p�rdoruesit

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
sq: - periferik�t pci: slot, periferik�t dhe funksioni i kartel�s PCI
    - periferik�t eide: ky periferik mund t� jet� sklave apo master
    - periferik�t scsi: bus dhe identiteti SCSI

en: Total size: %d / %d MB
sq: Madh�sia totale: %d / %d MB

en: disabled
sq: jo i lir�

en: Search for new scanners
sq: Hulumtim p�r skaner t� rinj�

en: Disabling servers...
sq: Dezaktivizim i Serverave...

en: Installation of %s failed. The following error occured:
sq: Instalimi i %s d�shtoi. P�r k�to ar�sye t� radhitura:

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
sq: E pa mundur nisja e mkinitrd -f /boot/initrd-%s.img %s.

en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They don't have any known security
    issues, but some new ones could be found. In that case, you must make sure
    to upgrade as soon as possible.
    
    
    Do you really want to install these servers?
sq: Ju keni zgjedhur server(et) e radhitur: %s
    
    
    K�ta server jan� t� aktivizuar me marr�veshje. Ata nuk kan� ndonji dalje
    t� siguruar, mir�po probleme t� reja mund t� paraqiten. N� ato momente
    ju duhet t� jeni i sigurt q� ti azhurnoni serverat tuja sa m� shpejt.
    
    
    Me t� v�rtet� d�shironi t'instaloni k�ta server?

en: Network printer (TCP/Socket)
sq: Stampues Rrjeri vetiak (TCP/Socket)

en: Backup User files...
sq: Regjistrimi i Skedareve t� P�rdoruesit...

en: Install system
sq: Instalim sistemin

en: First DNS Server (optional)
sq: Server DNS Kryesor (opcional)

en: Alternatively, you can specify a device name/file name in the input line
sq: Altenativisht ju keni mund�si t� sepcifikoni mjetin me emr�r/skedare, n� linj�n hyr�se

en: If SERVER_LEVEL (or SECURE_LEVEL if absent)
    is greater than 3 in /etc/security/msec/security.conf, creates the
    symlink /etc/security/msec/server to point to
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    The /etc/security/msec/server is used by chkconfig --add to decide to
    add a service if it is present in the file during the installation of
    packages.
sq: N�se NIVELI_SERVER (dhe n�se NIVELI_SIGURIS� mungon�) at�her� �sht� i
    krijuar 3 n� /etc/security/msec/security.conf, krijmi i symlink
    /etc/security/msec/ server p�r tu shenj�zuar n� /etc/security/msec/server.
    <SERVER_LEVEL>.
    Serveri /etc/security/msec/p�rdoret nga chkconfig --shtoje p�r t� vendosur
    nj� servis� n�se �sht� prezent n� skedare gjat� instalimit t� pakove.

en: Russian (Phonetic)
sq: Rusisht� (fonetik)

en: dhcpd Config...
sq: Konfigurim i dhcpd...

en: The setup has already been done, but it's currently disabled.
sq: Konfigurimi �sht� ve�se i kryer, mir�po aktualisht �sht� i shk�putur.

en: LILO/grub Installation
sq: Instalimi i LILO/grub

en: Israeli
sq: Izraelisht

en: Printer "%s" on server "%s"
sq: Stampues "%s" mbi server "%s"

en: Floppy can be removed now
sq: Tani disketa flopi mund t� nxirret nga lexuesi

en: Truly minimal install
sq: Provo nj� instalim minimal

en: Denmark
sq: Danimarka

en: Moving partition...
sq: Zhvendosja e ndarjes...

en: (This) DHCP Server IP
sq: Adresa IP p�r Serverin DHCP

en: Test of the configuration
sq: Test i konfigurimit

en: Installing %s ...
sq: Instalimi i %s ...

en: If you told the installer that you wanted to individually select packages,
    it will present a tree containing all packages classified by groups and
    subgroups. While browsing the tree, you can select entire groups,
    subgroups, or individual packages.
    
    Whenever you select a package on the tree, a description appears on the
    right to let you know the purpose of the package.
    
    !! If a server package has been selected, either because you specifically
    chose the individual package or because it was part of a group of packages,
    you will be asked to confirm that you really want those servers to be
    installed. By default Mandrake Linux will automatically start any installed
    services at boot time. Even if they are safe and have no known issues at
    the time the distribution was shipped, it is entirely possible that that
    security holes were discovered after this version of Mandrake Linux was
    finalized. If you do not know what a particular service is supposed to do
    or why it is being installed, then click "%s". Clicking "%s" will
    install the listed services and they will be started automatically by
    default during boot. !!
    
    The "%s" option is used to disable the warning dialog which appears
    whenever the installer automatically selects a package to resolve a
    dependency issue. Some packages have relationships between each other such
    that installation of a package requires that some other program is also
    rerquired to be installed. The installer can determine which packages are
    required to satisfy a dependency to successfully complete the installation.
    
    The tiny floppy disk icon at the bottom of the list allows you to load a
    package list created during a previous installation. This is useful if you
    have a number of machines that you wish to configure identically. Clicking
    on this icon will ask you to insert a floppy disk previously created at the
    end of another installation. See the second tip of last step on how to
    create such a floppy.
sq: M� n� fund, n�se keni vendosur nj� instalim me zgjidhje individuale, p�r
    t� zgjedhur pakot, DrakX do t� ju prezentoj nj� dru t� t� gjitha pakove
    t� kasifikuara simbas grupit dhe t� nd�r-grupit. Duke shfletuar drurin,
    ju mund t� zgjedhni grupe, dhe nd�r-grupe, apo pako individuale.
    
    Kudo q� ta zgjedhni nj� pako e cila gjindet n� dru, nj� p�rshkrim p�r t�, do
    t� paraqietet n� an�n e djatht�.
    
    !! N�se keni zgjedhur nj� program q� ta p�rdorni n� server, ju duhet ta
    v�rtetoni q� ai duhet t� instalohet. Nd�r Mandrake, me marr�veshje t� gjith�
    serveret do t� nisen nga nisja udh�zuese e sistemit (boot). Fat�keq�sisht
    nga t� gjitha forcat e investuara p�r t� ofruar nj� Linux t� sigut, �sht�
    e mundur q�, disa gabime t� siguris� t� infektojn� server-et e instaluar,
    deri n� dat�n e publikimit.
    N�se ju nuk e dini p�r �far� ar�sye nevojitet nj� server, apo p�r �far� �sht�
    instaluar, klikoni mbi "%s". Duke klikuar mbi "%s", serveri do t� instaloj
    t� gjitha serviset e ofruara n� nisjen e sistemit. !!
    .
    Opcioni "%s" do t� �zgjedh� paralajm�rimet t� cilat do t�
    paraqiten �do her� kur instaluesi zgjedh� nj� pako t� re. Ky paralajm�rim
    paraqitet, sepse DrakX e ka p�rcaktuar at�, dhe q� nj� pako t� funksionoj si
    duhet i nevojitet nj� tjet�r, d.m.th. mvaret edhe nga pako tjet�r
    
    Ikona e vog�l e disket�s floppy (floppy disk), e cila paraqitet posht�
    n� list�, mund�son rikuperimin e list�s s� pakove t� zgjedhura gjat� nj�
    instalimi tjet�r. Duke klikuar mbi t�, do t� ju pyesim q� ta futni nj�
    disket� e cila �sht� krijuar gjat� nj� instalimi t� m�parsh�m. Verifikoni
    sh�nimin e dyt� t� etap�s s� fundit, q� do t� ju m�soj se si duhet ta
    krijoni nj� disket� t� till�.

en: Choose your filesystem encryption key
sq: Zgjedheni �el�sin kriptues t� sistemit t� skedareve

en: Botswana
sq: Botsvana

en: Andorra
sq: Andora

en: (default value: %s)
sq: (vler� me marr�veshje: %s)

en: Set password aging to "max" days and delay to change to "inactive".
sq: Konfiguroje parull�n e moshuar n� "max" dit� dhe momentin ndryshues n� "inactive".

en: Alternative test page (Letter)
sq: Faqe testi alternativ� (Let�r)

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you don't know the meaning of an option, simply leave it as it is.
sq: Konfigurimi i Serverit DHCP.
    
    K�tu ju mund ti zgjidhni opcinet e ndryshme p�r konfigurimin e nj� serveri DHCP.
    N�se ju nuk e kuptoni do me th�njen e nj� opcioni, thjesht� lereni siq �sht� e sh�nuar m� par�.

en: Choose an X server
sq: Zgjedheni nj� server X (server XFree)

en: Swap partition size in MB:
sq: Madh�sia e ndarjes swap n� MB:

en: No changes to backup!
sq: Asnj� ndryshim p�r regjistruar!

en: Formatted
sq: Formatuar

en: Type of install
sq: Tipi i instalimit

en: Printer "%s" on SMB/Windows server "%s"
sq: Stampues "%s" mbi serverin SMB/Windows "%s"

en: 
    - Daemon (%s) include:
sq: 
    - Daemon (%s) p�rfshin�:

en: %d comma separated numbers
sq: numra t� ndar� me presje %d

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
sq: Protokoli rusers mund�son q� p�rdoruesit t� njoftohen p�r t� gjith�
    p�rdoruesit e kyqur n� t� nj�jtin rrjet.

en: Automatic Steps Configuration
sq: Konfigurimi i Etapave Automatike

en: Barbados
sq: Barbadi

en: Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!
sq: D�shironi t� dini m� shum� p�r bashk�sin� e Open Source? Bashkohuni me bot�n e programit gratis!

en: Please select data to backup...
sq: Ju lutemi zgjedhni t� dh�nat q� duhet t� regjistrohen...

en: Connection failed.
    Verify your configuration in the Mandrake Control Center.
sq: Lidhja d�shtoi.
    Verifikoje konfigurimin n� Qendr�n Kontrolluese Mandrake.

en: received
sq: pranuar

en: Enable su only from the wheel group members or for any user
sq: Aft�simi i super p�rdoruesit (su) vet�m nga an�taret e grupit timon apo njashtu mund�son super p�rdoruesit (su) nga secili p�rdorues

en: /File/_New
sq: /Skedare/_E Re

en: The DNS Server IP
sq: Adresa IP p�r Serverin DNS

en: IP Range End:
sq: Fundi i Kufirit IP:

en: High
sq: I lart�

en: Add a new printer to the system
sq: Shtoje nj� stampues t� ri n� sistem

en: this field describes the device
sq: kjo zon� e p�rshkruan periferik�t

en: Adding printer to Star Office/OpenOffice.org/GIMP
sq: Shtimi i stampuesit n� Star Office/OpenOffice.org/GIMP

en: Local Printers
sq: Stampuesit Lokal

en: Installation image directory
sq: Instalimi i repertorit p�r imazh

en: NIS Server
sq: Server NIS

en: Port: %s
sq: Porta: %s

en: Spain
sq: Spanja

en: local config: %s
sq: konfigurim lokal: %s

en: This user name has already been added
sq: Ky em�r i p�rdoruesit �sht� ve�se i shtuar�

en: Choose a file
sq: Zgjedhe nj� skedare

en: Apply
sq: Aplikoje

en: Auto-detect available ports
sq: Auto-zbulues i portave t� lira

en: Internet Connection Sharing currently disabled
sq: Shp�rndarja e lidhjes Internet �sht� dezaktivizuar

en: Belgium
sq: Belgjika

en: Kuwait
sq: Kuvajti

en: Choose the window manager to run:
sq: Zgjedheni nj� mjedis grafik p�r ta nisur:

en: December
sq: dhjetor

en: sub generation of the cpu
sq: nd�r prodhimi i cpu

en: First Time Wizard
sq: Asistent p�r Her� t� Par�

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
sq: Nj� gabim �sht� paraqitur, dhe me sa duket �sht� v�shtir t� zgjidhet.
    Ju mund t� vazhdoni, mir�po ju jeni p�rgjegj�s p�r ndonji gabim eventual.

en: Taiwan
sq: Taivane

en: Pakistan
sq: Pakistani

en: please wait, parsing file: %s
sq: nj� moment ju lutemi, v�rtetimi i skedares: %s

en: Importance:
sq: Me r�nd�si:

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
sq: Q� m� n� fund t� keni mund�si, t� stamponi me stampuesin tuaj Lexmark inkjet, me konfigurim t� tanish�m, ju keni nevoj� p�r pilot� stampimi inkjet t� furnizuar nga Lexmark (http://www.lexmark.com/). Klikoni n� lidhjen "Drivers". Zgjedheni modelin tuaj p�r sistem eksploatimi zgjedheni "Linux". Pilot�t, jan� pako RPM, apo skripte shell me nj� instalim grafik� t� aktivizuar n� mbrendshm�ri. Ju nuk keni nevoj� ta b�ni k�t� konfigurim me interfac grafik�. Anulojeni direkt mbasi q� ta pranoni licenc�n. Mandej stamponi faqet p�r ta rreshtuar pjes�n e lart� t� faqeve me "lexmarkmaintain" dhe rregulloni parametrat e tyre me k�t� program.

en: Permissions
sq: Autorizimet

en: Provider name (ex provider.net)
sq: Emri i furnizuesit (p.sh. provider.net)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
sq: Kompjuteri i juaj posedon sasi t� vog�l t� memoris�. Ju mund t� ndesheni me
    disa probleme gjat� instalimit t� Mandrake Linux. N�se kjo ndodh�, ju
    mund t� vazhdoni n� nj� instalim n� mod� teksti. P�r k�t� shtypni mbi
    `F1' kut t� niseni me nj� nisje t� udh�zuar n� CDROM, dhe fytni urdh�rin `text'.

en: Use the Windows partition for loopback
sq: P�rdore ndarjen Windows p�r loopback

en: Armenian (typewriter)
sq: Armenishte (makin� shtyp�se)

en: Connection type:
sq: Tip lidh�s:

en: Graphical interface
sq: Interfaci grafik

en: Chad
sq: Qadit

en: XFree %s with 3D hardware acceleration
sq: XFree %s me material 3D nxitues

en: Slovakia
sq: Sllovakia

en: Singapore
sq: Singapurit

en: Cambodia
sq: Kambogjia

en: Monitor HorizSync: %s
sq: Frekuenc� Horizontale Sinkronizuese: %s

en: Path
sq: Shtegu

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
sq: K�tu ju mund t� specifikoni gjdo urdh�r n� linj�, n� cilin job duhet t� lidhet t� ngjitete t� d�rgohet direkt n� stampues

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
sq: Sistemi stampues (%s) nuk do t� aktivizohet automatikisht n� nisjen e makin�s me udh�zim.
    
    �sht� e mundur q� aktivizimi automatik t� jet� zhdukur nga nj� p�rdoruues i nj� niveli m� t� lart� t� siguris�, sepse sistemet stampuese jan� shenja t� para t� sulmeve t� shpeshta.
    
    A d�shironi t� posedoni nj� nisje automatike t� sistemit stampues?

en: Printer %s
    What do you want to modify on this printer?
sq: Stampuesi %s
    �far� d�shironi t� ndryshoni n� k�t� stampues?

en: Add host
sq: Shto nj� ftues

en: If you really think that you know which driver is the right one for your card
    you can pick one in the above list.
    
    The current driver for your "%s" sound card is "%s"
sq: N�se me t� v�rtet mendon se e dini cili pilot �sht� i sakt� p�r kartel�n tuaj
    ju mund ta marrni nj�rin nga lista e sip�rme.
    
    Piloti aktual i kart�l�s s� z�rit "%s" �sht� "%s"

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
sq: A d�shironi q� p�rdoruesit t� ken� mund�si t� shp�rndajn� disa nga
    repertor�t e tyre? Me k�t� p�rdoruesit do t� ken� mund�si ti shp�rndajn�
    me klikim mbi "Shp�rdarje" n� konqueror (kde) dhe nautilus (gnome).
    
    "Personalizim" autorizon shp�rndarjes p�r p�rdorues t� p�rcaktuar.

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
sq: Ju lutemi zgjedhni ngarkimin apo shp�timin e pakos s� zgjedhur n� floppy disket�.
    Forma �sht� e nj�jt� sikur n� disket� me t�rheqje t� instalimit automatik�.

en: China (broadcast)
sq: Kina (transmetim)

en: Use quota for backup files.
sq: Kufizoje madh�sin� e regjistrimit.

en: Configuring printer "%s"...
sq: Konfigurimi i stampuesit %s"...

en: Do not allow execution of any binaries on the mounted
    file system. This option might be useful for a server that has file systems
    containing binaries for architectures other than its own.
sq: Mos e mund�so ekzekutimin e ndonji montimi binare n�
    sistemin e skedares. Ky opcion mund t� p�rdoret p�r server q� posedojn�
    sistem t� skedares binar me nj� arkitektur tjet�r q� ju e posedoni.

en: Internet connection
sq: Lidhja n� Internet

en: Loading module %s failed.
    Do you want to try again with other parameters?
sq: Ngarkimi i moduleve %s, d�shtoi
    A d�shironi t� provoni edhe nj� her� me parametra t� tjer�?

en: Welcome to the Open Source world.
sq: Mir�sevini n� bot�n Open Source

en: Bosnia and Herzegovina
sq: Bosnja dhe Herzegovina

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
sq: Ju keni nevoj p�r nj� sistem t� v�rtet skedaresh (ext2/ext3, reiserfs, xfs, ose jfs) p�r k�t� pik� montimi

en: You must enter a host name or an IP address.
sq: Ju duhet t� futni emrin e ftuesit apo adres�n IP.

en: Netherlands
sq: Holanda

en: Sending files by FTP
sq: D�rgimi i skedareve mes FTP...

en: Internal ISDN card
sq: Modemi i mbrendsh�m ISDN

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
sq: Asnj� pilot OSS apo ALSA alternativ p�r kartel�n tuaj t� z�rit (%s) q� p�rdoret aktualisht "%s"

en: Title
sq: Titulli

en: Install & convert Fonts
sq: Instalo & sh�nd�rro Polisat

en: WARNING
sq: KUJDES

en: Installing bootloader
sq: Instalimi i bootloader

en: replay
sq: rilexo

en: detected %s
sq: zbulimi i %s

en: Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention.
sq: Expert �sht� nj� gjuh� shtrir�se e skripteve Tcl e cila mund�son nj� sesion t� mbrendsh�m aktiv pa intervenimin e p�rdoruesit.

en: Virgin Islands (U.S.)
sq: Virgin Islands (SH.B.A)

en: Bad backup file
sq: Regjistrim i dob�t i skedares

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
sq: Konfigurimi i shp�rndarjes s� lidhjes Internet �sht� kryer.
    Dhe �sht� i aktivizuar.
    
    �far� d�shironi t� b�ni?

en: Enter IP address and port of the host whose printers you want to use.
sq: Futni adres�n IP dhe port�n e ftuesit, se cilin stampues d�shironi ta p�rdorni.

en: Pipe into command
sq: Ngjite n� nj� urdh�r

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
sq: Disa periferik prezent n� sistemin tuaj u nevojiten pilot� ``pronari'' p�r
    t� funksionuar si duhet. Ju mund t� gjeni m� shum� informacione p�rkat�se k�tu: %s

en: Detecting devices...
sq: Zbulimi i periferikve...

en: Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab.
sq: Dogana ju mundeson specifikimin e dit�s dhe or�s tuaj. Opcionet tjera p�rdoren n� nisjen e pjes�ve n� /etc/crontab.

en: Description of the fields:
sq: P�rshkrimi i zonave:

en: Basic options
sq: Opcionet Baz�

en: the name of the CPU
sq: emri i periferikut CPU

en: Accept bogus IPv4 error messages
sq: Pranoi lajmet e gabueshme t� rrejshme IPv4

en: Refreshing printer data...
sq: Rifreskimi i t� dh�nave t� stampuesit...

en: You must also format %s
sq: Ju duhet njashtu ta formatoni %s

en: Be careful: this operation is dangerous.
sq: Keni kujdes: ky operacion �sht� i rreziksh�m.

en: Insert a floppy containing package selection
sq: Futni disket�n me p�rmbajtje t� pakove t� zgjedhura

en: Security Alerts:
sq: Siguria e Alarmeve:

en: Sweden
sq: Suedia

en: Use Expect for SSH
sq: P�rdore Expertin p�r SSH:

en: Poland
sq: Polonia

en: Other ports
sq: Porta t� tjera

en: number of capture buffers for mmap'ed capture
sq: numri i tamponave p�r t�rheqje via mmap

en: SMBus controllers
sq: Kontrolluesit SMBus

en: Connection timeout (in sec)
sq: Koha maksimale p�r tu lidhur (n� sekonda)

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
sq: Disa nga qipet e hershme i486DX-100 nuk kan� mund�si t� kthehen n� mod� operues, mbasi q� urdh�ri "halt" �sht� p�rdorur

en: Croatian
sq: Kroatisht�

en: Use existing partition
sq: P�rdore ndarjen egzistuese

en: Unable to contact mirror %s
sq: Nuk mundur t� kontaktohet pasqyrja %s

en: /Help/_About...
sq: /Ndihm�/_N� lidhje me...

en: Remove user directories before restore.
sq: Zhduki repertor�t e tjer� para riparimit

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
sq: Ju gjindeni n� pik�n e konfigurimit t� stampuesit t� larg�t. Kjo ka nevoj� p�r nj� hyrje n� rrjet, mir�po rrjeti i juaj nuk �sht� i konfiguruar ende. N�se ju d�shironi t� vazhdoni pa e konfiguruar rrjetin tuaj, ju nuk keni mund�si ta p�rdorni k�t� stampuesin, t� cilin jeni duke e konfiguruar tani. Qfar� d�shironi t� b�ni?

en: CUPS printer configuration
sq: Konfigurimi i stampuesit CUPS

en: could not find any font in your mounted partitions
sq: nuk mund ta gjej� asnj� polis� n� ndarjen tuaj t� montuar

en: F00f bug
sq: Bug F00f

en: Domain Name:
sq: Emri i Pron�s:

en: Root umask
sq: Umask e administratorit

en: On Floppy
sq: Mbi Disket� Floppy

en: Reboot by the console user
sq: Rinise nga konsola e p�rdoruesit

en: Restore
sq: Riparo

en: if set to yes, check if the network devices are in promiscuous mode.
sq: n�se konfigurohet me po, verifikoje n�se periferiku i rrjetit �sht� n� mod� t� p�rzier.

en: Looking for available packages...
sq: Hetim mbi pakot e lira...

en: Init Message
sq: Lajm i Nisjes

en: Rescue partition table
sq: Tabel� shp�tuese p�r ndarje

en: Cyprus
sq: Qipro

en: Connection complete.
sq: Lidhja p�rfundoi.

en: Remove from RAID
sq: Zhduke nga RAID

en: This encryption key is too simple (must be at least %d characters long)
sq: Ky �el�s kriptues �sht� shum� i thjesht� (duhet t� jet� m� s� paku prej%d shifrave)

en: Configuration Wizards
sq: Asistent�t Konfigurues

en: ISDN connection
sq: Lidhja ISDN

en: CD-R / DVD-R
sq: CDROM / DVDROM

en: primary
sq: primar

en:  on SMB/Windows server "%s", share "%s"
sq:  n� server SMB/Windows "%s", i ndar� "%s"

en: This dialog is used to choose which services you wish to start at boot
    time.
    
    DrakX will list all the services available on the current installation.
    Review each one carefully and uncheck those which are not needed at boot
    time.
    
    A short explanatory text will be displayed about a service when it is
    selected. However, if you are not sure whether a service is useful or not,
    it is safer to leave the default behavior.
    
    !! At this stage, be very careful if you intend to use your machine as a
    server: you will probably not want to start any services that you do not
    need. Please remember that several services can be dangerous if they are
    enabled on a server. In general, select only the services you really need.
    !!
sq: Ky dialog ju mund�son zgjidhjen serviseve prezente p�r nisjen e sistemit
    tuaj me udh�zim (boot).
    
    DrakX do t� listoj t� gjitha serviset prezente me instalime vendase.
    B�jeni nj� verifikim dhe eliminoni ato q� nuk nevojiten p�r nj� nisje
    me udh�zim (boot).
    
    Ju mund t� p�rfitoni shpjegime t� shkurt�ra, duke i zgjedhur ato nj� nga
    nj�. Kjo d.m.th. n�se ju nuk jeni i sigurt p�r aplikacionin e nj� servisi,
    mir�mbani paramtrat me marr�shje.
    
    !! N� k�t� etap�, vini re n� rastin e nj� sistemi t� p�rcaktuar me reakcione
    t� server-it: n� k�t� rast, ju d�shironi ti lejoni t� gjitha serviset e
    duhura. Keni kujdes, se disa nga serviset mund t� jen� t� rrezikshme
    n�se ato nuk jan� t� lira n� server. N� raste t� p�rgjithsh�m ju duhet ti
    zgjedhni vet�m serviset q� ju nevojiten.
    !!

en: Skip
sq: Hedhe

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
sq: Aktivizon/Dezaktivizon mbar� rrjetin e interfacit t� konfiguruar i
    cili niset n� nisje t� udh�zuar (boot).

en: the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
sq: frekuenca cpu n� MHz (Mega herc e cila n� fillim �sht� p�raf�rsisht nj� num�r i nj�jt� q� p�rshkruan cpu, dhe mund t� ekzekutohet n� gjdo sekond�)

en: Mandrake Linux Printer Management Tool
sq: Veg�l Qeveris�se p�r Stampuesin Linux Mandrake

en: important
sq: me r�nd�si

en: Total Progress
sq: P�rparsi Totale

en:         - Maintain /etc/shadow\$\$CLIENT\$\$:
            		For users to be able to log into the system from a diskless client, their entry in
            		/etc/shadow needs to be duplicated in /etc/shadow\$\$CLIENTS\$\$. drakTermServ helps
            		in this respect by adding or removing system users from this file.
sq:         - Mir�mbajtja /etc/shadow\$\$CLIENT\$\$:
            		P�r p�rdoruesit q� t� jan� n� gjendje t� lidhen n� sistem nga nj� klient me disk m� t� vog�l, hyrjet e tyre n�
            		/etc/shadow kan� nevoj� t� dyfishohen n� /etc/shadow\$\$CLIENTS\$\$. drakTermServ e ndihmon�
            		k�t� me nj� respekt duke shtuar apo zhdukur p�rdorues t� sistemit nga kjo skedare.

en: DrakX will first detect any IDE devices present in your computer. It will
    also scan for one or more PCI SCSI cards on your system. If a SCSI card is
    found, DrakX will automatically install the appropriate driver.
    
    Because hardware detection is not foolproof, DrakX may fail in detecting
    your hard drives. If so, you'll have to specify your hardware by hand.
    
    If you had to manually specify your PCI SCSI adapter, DrakX will ask if you
    want to configure options for it. You should allow DrakX to probe the
    hardware for the card-specific options which are needed to initialize the
    adapter. Most of the time, DrakX will get through this step without any
    issues.
    
    If DrakX is not able to probe for the options to automatically determine
    which parameters need to be passed to the hardware, you'll need to manually
    configure the driver.
sq: DrakX, tani do t� hulumtoj gjdo IDE periferik n� kompjuterin tuaj. Ai
    njashtu do t� scanon, nj� apo m� shum� kartela PCI SCSI n� sistemin
    tuaj. N�se nj� kartel� SCSI �sht� gjetur nga DrakX, ai do t� instaloj
    automatikisht pilotin e saj t� nevojsh�m.
    
    N� disa raste zbuluesi i materialit nuk �sht� foolproof, dhe nuk
    mund t� zbuloj ndonji pjes�, k�shtu ju duhet ta specifikoni me dor�.
    
    N�se ju duhet t� specifikoni kartel�n tuaj PCI SCSI n� m�nyr� manuale,
    DrakX do t� ju pyes p�r specifikimin e mund�sive t� tija. Ju duhet t�
    lejoni, q� DrakX t� verifikoj automatikisht kartel�n tuaj, p�r opcionet
    e nevojshme t� p�rcaktuara.
    
    �sht� e mundur q�, DrakX t� mos jet� n� gjendje ti verifikoj opcionet
    e nevojshme. N� k�to raste, ju duhet ti p�rcaktoni manuelisht.

en: Users
sq: P�rdoruesit

en: Preparing bootloader...
sq: Pregatitja e bootloader...

en: Gateway (e.g. %s)
sq: Port� Hyr�se Gateway (p.sh. %s)

en: The passwords do not match
sq: Parullat nuk p�rputhen

en: Examples for correct IPs:
sq: Shembull p�r lidhjet korrekte IP:

en: Please choose the media for backup.
sq: Ju lutemi zgjedheni burimin p�r regjistrim

en: Frequency (MHz)
sq: Frekuenca (MHz)

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
sq: P�r ta p�rdorur k�t� regjistrim dhe zgjedhjet e pakove, riniseni instalimin me urdh�rin ``linux defcfg=floppy''

en: the number of the processor
sq: numri i procesorit

en: Hardware clock set to GMT
sq: Or� Sistemi e rregulluar n� Koh�n Univerzale (GMT)

en: Do you want to start a new configuration ?
sq: A d�shironi t� nisni nj� konfigurim t� ri?

en: Give a file name
sq: Jepni nj� em�r skedare

en: Please choose the port that your printer is connected to.
sq: Ju lutemi zgjedheni port�n n� t� cil�n stampuesi juaj �sht� i kyqur.

en: Change Cd-Rom
sq: Nd�rroje Cd-Rom

en: Paraguay
sq: Paraguaje

en: Configuration is complete, do you want to apply settings ?
sq: Konfigurimi u kompletua, a d�shironi ti aplikoni rregullimet?

en: Use Incremental/Differential Backups  (do not replace old backups)
sq: P�rdori regjistrimet Nj�ra pas Tjetr�s/Ndryshuesh�m (mos e z�vend�so regjistrimin e vjet�r)

en: There's no known driver for your sound card (%s)
sq: Nuk ka pilot� t� njoftur p�r kartel�n tuaj t� z�rit (%s)

en: force
sq: detyroje

en: Exit
sq: Braktise

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
sq: SH�NIM: Nga funksioni dhe modeli i sistemit t� stampimit, deri n� %d Mb t� programeve llogarit�se do t� instalohen.

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
sq: Ju nuk posedoni ndonji konfigurim n� interfac.
    Konfiguroje m� se pari at�, duke klikuar mbi 'Konfiguro'

en: Estonian
sq: Estonisht

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
sq: Apache �sht� nj� server web (HTTP). P�rdoret p�r t� krijuar skedare HTML dhe CGI.

en: Enter your CD Writer device name
     ex: 0,1,0
sq: Futni emrin e Gdhend�sit tuaj t� CD-ve
     p.sh: 0,1,0

en: ALL
sq: GJITHA

en: Add/Del Clients
sq: Shtoi/Zhduki Klientat

en: Choose the network interface
sq: Zgjedheni kartel�n e rrjetit

en: Unknown Model
sq: Model I Pa Njoftur

en: CD/DVD burners
sq: Gdhend�sit CD/DVD

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
sq: Ndraje me nisje t� udh�zuar n� marr�veshje
        (p�r nisje n� MS-DOS, e jo p�r LILO)

en: Enable "%s" to read the file
sq: Aktivizoje "%s" p�r leximin e skedares

en: choose image
sq: zgjedhje nj� imazh

en: Firewalling configuration detected!
sq: Zbulimi i Konfigurimi t� Murit t� Zjarrt�

en: Connection name
sq: Emri i lidhjes

en: x coordinate of text box
    in number of characters
sq: koordinatat n� x t� zon�s s� tekstit
    n� numrat e karakter�ve

en: Updating package selection
sq: Azhurnimi i pakove t� zgjedhura

en: Where do you want to mount the loopback file %s?
sq: Ku d�shironi ta montoni skedaren loopback %s?

en: The floppy has been successfully generated.
    You may now replay your installation.
sq: Disketa flopi �sht� prodhuar me sukses.
    Ju mund ta rinisni instalimin tuaj.

en: Use CD-R/DVD-R to backup
sq: P�rdore CD/DVDROM p�r regjistrim

en: the number of buttons the mouse has
sq: sasia e kopsave q� mini juaj posedon

en: Replay
sq: Rilexo

en: Backup other files
sq: Regjistro skedare t� tjera

en: No floppy drive available
sq: Asnj� lexues i disketave s'�sht� i lir�

en: Backup files are corrupted
sq: Skedaret e regjistruara jan� t� d�mtuara

en: TV norm:
sq: Norma e TV-s�:

en: Cpuid family
sq: Cpuid familjar

en: type: thin
sq: tipi: holl�

en: Lithuanian AZERTY (new)
sq: Lituanis� AZERTY (e re)

en: yes means the arithmetic coprocessor has an exception vector attached
sq: po d.m.th. aritmetika e kopocesorit posedon nj� vektor t� ngjitur

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    Please be sure to add a /boot partition
sq: Ju keni zgjedhur nj� program me ndarje RAID sikur ndarje rr�nj�zore root (/).
    Q� sistemi i juaj t� funksionoj si duhet, shtone nj� ndarje jo RAID
    t� repertorit ndar�s /boot

en: Other OS (MacOS...)
sq: Sistem tjet�r Eksploatues (MacOS, etj.)

en: To activate the mouse,
sq: P�r t'aktivizuar minin,

en: Bringing up the network
sq: Nisja e rrjetit (network)

en: Screenshots will be available after install in %s
sq: Grabitjet e ekranit (screenshots) jan� t� mundura mbas instalimit n� %s

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose which one you want to resize in order to install your new
    Mandrake Linux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
sq: Jan� gjetur m� shum� se nj� ndarje Windows n� diskun tuaj t� fort, ju
    lutemi zgjedheni nj�rin p�r ta ridimenziunuar, dhe p�r t� instaluar
    sistemin t� ri eksploatues Mandrake Linux.
    
    �do ndarje �sht� listuar simbas: "Emri Linux",  "Emri Windows"
    "Kapaciteti".
    
    "Emri Linux" �sht� i strukturuar: "tipi i diskut t� fort", "numri i
    diskut t� fort", "Numri i ndarjes" (p�r shembul, "hda1").
    
     "Tipi i diskut t� fort" �sht� "hd" n�se disku i juaj �sht� IDE
    disk i fort, dhe "sd" n�se �sht� SCSI disk i fort.
    
     "Numri i diskut t� fort" �sht� gjithnji nj� shkronj� mbas "hd" ose
    "sd". P�r disqet IDE:
    
     * "a" do t� thot� "disk primare master mbi kontroluesin e par� IDE";
    
     * "b" do t� thot� "disk primare esklav� mbi kontroluesin e par� IDE";
    
     * "c" do t� thot� "disk primare master mbi kontroluesin e dyt� IDE";
    
     * "d" do t� thot� "disk primare esklav� mbi kontroluesin e dyt� IDE";
    
    Me disqet SCSI, "a" do t� thot� "Identiteti m� i ul�t SCSI", "b" do
    t� thot�  "Identiteti i dyt� m� i ul�t SCSI", etj.
    
    "Emri Windows" �sht� nj� let�r e diskut tuaj t� fort nd�r Windows (disku
    i par� ndar�s quhet "C:").

en: Tanzania
sq: Tanzaniane

en: Computing FAT filesystem bounds
sq: Llogaritja e kufijve t� sistemit t� skedareve FAT

en: 
    Backup Sources:
sq: 
    Regjistroi Burimet:

en: custom
sq: dogana

en: Content of the file
sq: P�rmbajtja e skedares

en: Authentication LDAP
sq: V�rtet�simi LDAP

en: Let me pick any driver
sq: M� lejo t� marr� gjdo pilot

en: Profile
sq: Profili

en: transmitted
sq: transmetuar

en: Palestine
sq: Palestineze

en: RAID md%s
sq: I p�rket� RAID md%s

en: %d comma separated strings
sq: vargje t� ndara me presje %d

en: Here is the full list of keyboards available
sq: Ja ku �sht� lista komplete e tastierave t� lira

en: Theme name
sq: Emri i tem�s

en: /_Help
sq: /_Ndihm�

en: Choosing an arbitrary driver
sq: Zgjedhje e nj� piloti arbitrar

en: Cook Islands
sq: Ishujt Kuk

en: Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines.
sq: K�tu keni mund�si t� zgjedhni se n�se skaner�t e lidhur n� k�t� makin� duhet t� jen� me hyrje n� makin�n e larg�t, dhe nga cila makin� e larg�t.

en: the width of the progress bar
sq: gjat�sia e shufr�s p�rparuese

en: Formatting partition %s
sq: Formatimi i ndarjes %s

en: Hostname required
sq: Emri i ftuesit nevojitet

en: Unselect fonts installed
sq: �zgjedhi polisat e instaluara

en: Cancel
sq: Anulo

en: Searching for configured scanners ...
sq: Hulumtim n� konfigurmin e skanerve...

en: Wheel
sq: Rrota

en: Videocard
sq: Kartel� video

en: 	Backups use tar and bzip2
sq: 	Regjistrimi do t� p�rdor� tar dhe bzip2

en: Remove Selected
sq: Zhduki t� Zgjedhurat

en: /Autodetect _modems
sq: Auto-zbulues _modemeve

en: Remove printer
sq: Zhduke stampuesin

en: View Last Log
sq: �faqe Log e Fundit

en: Which services would you like to allow the Internet to connect to?
sq: Cilat servise d�shironi ti lini t� lira me hyrje nga Interneti?

en: Connection Type
sq: Tip i Lidhjes

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
sq: Mir�sevini n� p�rdorimin e konfiguruesit p�r lajme.
    
    K�tu, keni mund�si t� rregulloni sistemin tuaj alarmues.

en: Other
sq: Tjet�r

en: Default
sq: Me marr�veshje

en: Button 2 Emulation
sq: Imitues i Kops�s 2

en: Run chkrootkit checks
sq: Nisi verifikimet chkrootkit

en: type1inst building
sq: nd�rtimi nga type1inst

en: choose image file
sq: zgjedhe nj� skedare imazh

en: X server
sq: Server XFree

en: Domain Admin User Name
sq: Emri i Administruesit t� Pron�s

en: There was an error while scanning for TV channels
sq: Nj� gabim �sht� paraqitur gjat� k�rkimit t� kanaleve TV

en: US keyboard (international)
sq: Tastiera e SHBA-�s (internacional)

en: Not installed
sq: I pa instaluar

en: Both Alt keys simultaneously
sq: T� Dyja kopsat nj�koh�sish Alt

en: LAN connection
sq: Lidhje LAN

en: /File/-
sq: /Skedare/-

en: Italian
sq: Italiane

en: Basic
sq: Bazik

en: 
     Copyright (C) 2002 by MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com
sq: 
     E drejt� autori (C) 2002 nga MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com

en: Honduras
sq: Hundurasi

en: Card IO
sq: Kartela IO

en: when checked, owner and group won't be changed
sq: mbasi t� verifikohet, pronari i grupit nuk do t� ndryshoshet

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
sq: 
    Kjo ndarje e nisjes me udh�zim (bootstrap)
    �sht� e domosdoshme n�se ju posedoni
    m�s shum� se nj� sistem eksploatues.

en: Please choose for each step whether it will replay like your install, or it will be manual
sq: Ju lutemi zgjedhni p�r secil�n etap�, n�se ajo duhet t� rilexohet, apo duhet t� jet� manuale

en: You can also decide here whether scanners on remote machines should be made available on this machine.
sq: Ju keni mund�si njashtu t� vendosni, n�se skaner�t tjer� n� makinat e larg�ta duhet t� jan� automatikisht t� lir� n� k�t� kompjuter.

en: 	-Network by FTP.
sq: 	-Rrjeti nga FTP.

en: Reports check result to tty
sq: Verifikoji rezultatet e raporteve n� tty

en: You must enter a device or file name!
sq: Ju duhet t� futni emrin e mjetit, apo t� skedares!

en: /_Quit
sq: /_Braktise

en: Graphics memory: %s kB
sq: Memoria grafike: %s kB

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
sq: Ky program �sht� gratis; ju mund ta shp�rndani dhe ta ndryshoni at�,
    nd�r termet e GNU General Public License ashtu siq �sht� i publikuar
    nga Free Software Foundation; apo versionin 2, t� k�saj licence (me 
    zgjedhjen tuaj) apo nj� version m� t� vjet�r.
    
    Ky program shp�rndahet me shpres� se do t� jet� i p�rdorsh�m,
    mir�po PA KURR�FAR GARANTIE; dhe pa ndonji garanti implicite t� k�tij
    PRODUKTI, apo me P�RSHTATJE M� NJ� Q�LLIM SPECIFIK. Shiqo n�
    GNU General Public License p�r m� shum� detaje.
    
    Ju duhet t� pranoni nj� kopie t� GNU General Public License
    n� t� nj�jt�n koh� me k�t� program; n�se jo, na shkruani n� Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: access to compilation tools
sq: hyrjet n� veglat kompiluese

en: Please select data to restore...
sq: Ju lutemi zgjedhni t� dh�nat q� duhen t� riparohen...

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
sq: N�se d�shironi ta p�rdorni aboot, keni kujdes gjat� rezervimit t� nj� hap�sire t� lir� (minimum duhet t� jet� 2048 sektor�)
    n� fillim t� diskut.

en: Standard test page
sq: Test p�r faqe standard

en: Create
sq: Krijo

en: What
sq: �far�

en: There was an error ordering packages:
sq: Nj� gabim �sht� paraqitur gjat� radhitjes s� pakove:

en: Bulgarian (BDS)
sq: Bulgarishte (BDS)

en: Disable Server
sq: Dezaktivizoje Serverin

en: Filesystem encryption key
sq: �el�s kriptues i sistemit t� skedareve

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
sq: Ju lutemi zgjedheni numrim e par� t� grupit 10 t� cilin d�shironi,
    ta ndryshoni, ose shtypni vet�m mbi Enter p�r t� vazhduar.
    Zgjedhja juaj?

en: Save theme
sq: Shp�toje tem�n

en: Brazil
sq: Brazili

en: Auto Install
sq: Instalim Automatik

en: Network Configuration Wizard
sq: Asistenti p�r Konfigurimin e Rrjetit

en: Removable media automounting
sq: Automontim i periferik�ve l�viz�s

en: Enter the directory to save:
sq: Futni repertorin p�r ta regjistruar:

en: Printing
sq: Stampimi

en: There are no printers found which are directly connected to your machine
sq: Asnj� nga stampuesit e gjetur, nuk jan� lidhur direkt me makin�n tuaj

en: Create a new partition
sq: Krijo nj� ndarje t� re

en: Driver:
sq: Pilot:

en: unknown
sq: i pa njoftur

en: Use fdisk
sq: P�rdore fdisk

en: MOVE YOUR WHEEL!
sq: DUHET TA L�VIZNI RROT�N!

en: sent:
sq: d�rgim:

en: Automatic IP
sq: Shp�rndarja automatike e adres�s IP

en: There you are. Installation is now complete and your GNU/Linux system is
    ready to use. Just click "%s" to reboot the system. The first thing you
    should see after your computer has finished doing its hardware tests is the
    bootloader menu, giving you the choice of which operating system to start.
    
    The "%s" button shows two more buttons to:
    
     * "%s": to create an installation floppy disk that will automatically
    perform a whole installation without the help of an operator, similar to
    the installation you just configured.
    
       Note that two different options are available after clicking the button:
    
        * "%s". This is a partially automated installation. The partitioning
    step is the only interactive procedure.
    
        * "%s". Fully automated installation: the hard disk is completely
    rewritten, all data is lost.
    
       This feature is very handy when installing a number of similar machines.
    See the Auto install section on our web site for more information.
    
     * "%s"(*): saves a list of the packages selected in this installation.
    To use this selection with another installation, insert the floppy and
    start the installation. At the prompt, press the [F1] key and type >>linux
    defcfg="floppy" <<.
    
    (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
    "mformat a:")
sq: Ja pra ku jeni. Instalimi i juaj GNU/Linux p�rfundoi, dhe sistemi i juaj
    �sht� i gatsh�m p�r p�rdorim. Klikoni mbi "%s" p�r t� rinisur sistemin
    tuaj. Gj�ra e par� q� ju duhet ta v�reni mbasi q� kompjuteri i juaj t�
    p�rfundoj me testet e b�ra �sht� meny bootloader, duke ju mund�suar nj�
    nisje nga sistemet operuese q� jan� prezente n� diskun tuaj.
    
    Kopsa "%s" mund�son dy zgjedhje tjera: 
    
     * "%s": p�r t� krijuar nj� diskete instaluese, e cila do t� ju
    mund�son, t� rizhvilloni nj� instalim q� e keni relaizuar para disa
    qasteve, pa ndihm�n e ndonji administratori.
    
       Sh�noni, se t� dy mund�sit� p�r zgjedhje do t� paraqiten mbasi q� t�
    klikoni mbi kops�n:
    
        * "%s". �sht� nj� instalim pjes�risht automatik�, ku �sht�
    e mundur ti personalizoni shp�rndarjet, e diskut (ve�mas).
    
        * "%s". Instalim komplet automatik, disku i fort do t�
    rishkruhet kompletisht, dhe t� gjitha t� dh�nat do t� zhduken.
    
       Kjo mund�si �sht� tejet praktike, p�r instalimin e m� shum� sistemeve.
    Shiqoni sekcionin Auto Instalim t� sitit ton Web.
    
     * "%s"(*): regjistrimi i list�s s� pakove t� instaluara.
    P�r ta p�rdorur k�t� zgjidhje me nj� instalim tjet�r, futni disket�n
    floppy n� lexues, dhe hyni n� menyn ndihmuese duke shtypur mbi kops�n
    [F1] n� ftim, dhe futni k�t� urdh�r me radh� >>linux defcfg="floppy"<<.
    
    (*) Ju keni nevoj� p�r nj� diskete t� formatuar n� FAT (p�r ta krijuar nd�r
    GNU/Linux shkruani "mformat a:")

en: Configuration of a remote printer
sq: Konfigurimi i stampuesit t� larg�t

en: An online platform to respond to enterprise support needs.
sq: Nj� p�rkrahje n� linj� p�r tu p�rgjegjur kompanive t� caktuara

en: URL should begin with 'ftp:' or 'http:'
sq: URL duhet t� filloj me 'ftp:' apo 'http:'

en: Oriya
sq: Orija

en: Add a new rule at the end
sq: Shtoje nj� rregull� t� re n� fund

en: LiLo and Bootsplash themes installation successful
sq: Instalimi i tem�s p�r imazh� t� nisjes s� udh�zuar n� LILO, p�rfundoi me sukses

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
sq: Ju keni mund�si njashtu t� vendosni, n�se stampuesit tjer� n� makinat e larg�ta duhet t� jan� automatikisht t� lir� p�r k�t� kompjuter.

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
sq: Ju mund ti precizoni opcionet e modulit %s.
    Opcionet jan� n� form�n ``name=value name2=value2 ...''.
    P�r shembull, ``io=0x300 irq=7''

en: Quit without writing the partition table?
sq: Braktise pa i regjistruar tabelat� ndar�se

en: Genius NetScroll
sq: Genius NetScrol

en: On Hard Drive
sq: n� Disk t� Fort�

en: Installing packages...
sq: Intalimi i pakove...

en: Dutch
sq: Holandisht

en: The following packages need to be installed:
sq: Pakot e radhitura duhet t� instalohen:

en: service setting
sq: rregullimi i sh�rbimeve

en: Custom
sq: Personalizim

en: File is already used by another loopback, choose another one
sq: Skedarja �sht� n� p�rdorim e sip�r nga nj� loopback tjet�r, zgjedheni nj� tjet�r

en: Read-only
sq: Vet�m p�r ta lexuar

en: Enable/Disable name resolution spoofing protection.  If
    "alert" is true, also reports to syslog.
sq: Aktivizoje/Blokoje emrin e zgjedhjes s� mbrojtjes me tallje.  N�se
    "alert" �sht� e v�rtet�, raportoje tek syslog.

en: No known driver
sq: Asnj� pilot i njoftur

en: If it is not the one you want to configure, enter a device name/file name in the input line
sq: N�se nuk �sht�, ai t� cilin d�shironi ta konfiguronioni, futni emrin/skedaren e mjetit n� linj�n hyr�se

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
sq: Asnj� Kartel� e Z�rit s'�sht� zbuluar n� makin�n tuaj. Ju lutemi verifikoni n�se nj� kartel� z�ri p�rkrahet nga Linux, dhe �sht� e lidhur� n� m�nyr� korrekte.
    
    
    Ju mund ta vizitoni mjetin tuaj t� baz�n s� t� dh�nave n�:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: 			While you can use a pool of IP addresses, rather than setup a specific entry for
    			a client machine, using a fixed address scheme facilitates using the functionality
    			of client-specific configuration files that ClusterNFS provides.
    			
    			Note: The "#type" entry is only used by drakTermServ.  Clients can either be 'thin'
    			or 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run 
    			most software on the client machine. A special inittab, /etc/inittab\$\$IP=client_ip\$\$ is
    			written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are 
    			modified if thin clients are used, to enable xdmcp. Since there are security issues in 
    			using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local
    			subnet.
    			
    			Note: The "#hdw_config" entry is also only used by drakTermServ.  Clients can either 
    			be 'true' or 'false'.  'true' enables root login at the client machine and allows local 
    			hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled 
    			by creating separate config files associated with the client's IP address and creating 
    			read/write mount points to allow the client to alter the file. Once you are satisfied 
    			with the configuration, you can remove root login privileges from the client.
    			
    			Note: You must stop/start the server after adding or changing clients.
sq: 			P�rderisa ju i p�rdorni rrjedhat e adresave IP, m� mir� �sht� q� t' instaloni hyrjet p�r
    			nj� klient makine, p�rdorimi i adresave fikse shematike do t� leht�sojn� p�rdorimin e funksionimit t�
    			nj� klienti-specifik p�r konfgurimin e skedareve t� furnizuara ClusterNFS.
    			
    			Sh�nim: Hyrja "#type" p�rdoret vet�m nga drakTermServ. Klientat mund t� jen� t� "tiny"
    			apo t� 'fat'. Klientat e holl� nisin m� s� shumti programe n� server via xdmcp, p�rderisa klientat e trash� nisin m� s� shumti
    			programe n� makina kliente. N� tabel� hyr�se speciale (inittab), /etc/inittab\$\$IP=client_ip\$\$ �sht�
    			shkruar p�r klienta t� holl�. Systemi konfigurues i skedareve xdm-config, kdmrc, dhe gdm.conf ndryshohet
    			n�se k�ta klienta t� holl� p�rdoren tani, n� xdmcp t� lir� p�r p�rdorim. Prej se jan� siguruar� kalimet n� p�rdorimin e xdmcp,
    			hosts.deny dhe hosts.allow jan� ndryshuar kufijt e hyrjeve n� nd�r rrjetet
    			lokale.
    			
    			Sh�nim: Hyrja "#hdw_config" njashtu p�rdoret nga drakTermServ. Klientat mund t� jen� 
    t� 'true' (v�rtet) apo t� 'false' (rrejsh�m). 'true' mund�sojn nj� lidhje administratori n� makin�n e klientit, dhe njashtu 
    			mund�son konfigurimin e mjeteve, p.sh. t� z�rit, minit, dhe X, duke p�doruru veglat 'drak'. Kjo mund t� b�het me
    			krijimin e nj� konfigurimi e skedareve t� ndara duke i bashkangjitur me adres�n IP t� klientave tjer� dhe krijimin 
    			e pikava montuese lexim/shkrim p�r tu mond�suar klientave ndryshimin e skedares. Mbasi q� ju jeni i k�naqur me 
    			konfigurimin e b�r�, ju mund ta zhdukni lidhjen administrator t� privilegjuar nga ky klient.
    			
    			Sh�nim: Ju duhet ta ndalni/nisni serverin mbasi ti shtoni apo ti ndryshoni klientat.

en: Configure Local Area Network...
sq: Konfiguroni Rrjetin Lokal...

en: Verify checksum of the suid/sgid files
sq: Verifikoni p�rmbajtjen shum�s s� skedareve suid/sgid

en: Launch the sound system on your machine
sq: Ngarkojeni sistemin e qeveris�s t� z�rit n� makin�n tuaj

en: Run some checks against the rpm database
sq: Nisi disa verifikime kund�r baz�s s� t� dh�nave rpm.

en: Execute
sq: Ekzekutoje

en: Preparing printer database...
sq: Pregatitje e baz�s s� t� dh�nave p�r stampues...

en: Information
sq: Informacion

en: No network card
sq: Asnj� kartel� e rrjetit

en: 3 buttons
sq: 3 kopsa

en: Which filesystem do you want?
sq: Cilin sistem t� skedareve e d�shironi?

en: Detailed information
sq: Informacione t� holl�sishme

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
sq: Rregullimi i stampuesit me marr�veshje
    
    Ju duhet t� jeni i sigurt se madh�sia e faq�s dhe tipi i ngjyr�s (n�se �sht� n� disponibilitet) jan� t� paraqitur� n� m�nyr� korrekte. Sh�nim n�se shpejt�sia e stampimit zvog�lohet d.m.th. ju do ta zmadhoni kualitetin e stampimit.

en: This floppy is not FAT formatted
sq: Kjo disket� nuk �sht� formuar simbas FAT

en: Configuring network
sq: Konfigurimi i rrjetit

en: This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used.
sq: Ky opcion do t� regjistroj skedaret q� ju i keni ndryshuar. M� sakt�sisht sjellja mvar�sis n� secilin mod t� ndrysh�m p�rdoret nga rritja nj� nga nj�.

en: Graphic Card
sq: Kartela Grafike

en: Resizing Windows partition
sq: Ridimenzionimi ndarjes Windows

en: Cameroon
sq: Kameruni

en: Provider dns 1 (optional)
sq: DNS i par� furnizues (opcional)

en: You can now partition %s.
    When you are done, don't forget to save using `w'
sq: Ju mund ta shp�rndani tani %s.
    Kur t� p�rfundoni, mos harroni ti regjistroni ndryshimet duke p�rdorur `w'

en: Saami (swedish/finnish)
sq: Saami (suedisht/finish)

en: Close
sq: Mbylle

en: "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
sq: "%s": verifikoni zgjedhjen e shtetit tuaj t� tanish�m. N�se ju nuk
    gjindeni n� at� shtet q� duhet t� jeni, klikoni mbi kops�n "%s"
    dhe zgjedheni nj� shtet tjet�r. N�se shteti juaj nuk �sht� i �faqur n�
    k�t� list, klikoni mbi kops�n "%s" p�r t� pranuar nj� list� 
    m� komplete p�r shtete tjera.

en: Calendar
sq: Kalendari

en: Restore Selected
    Catalog Entry
sq: Riparo Hyrjet
    e Katalogut t� Zgjedhur

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
sq: P�r t� p�rdorur nj� stampues lpd, ju duhet ta sh�noni emrin e ftuesit t� serverit LPD, dhe emrin shp�rndar�s t� atij stampuesi nga i nj�jti server.

en: Iceland
sq: Islanda

en: Network & Internet Configuration
sq: Rrjeti & Konfigurimi i Internetit

en: consolehelper missing
sq: consolehelper mungon

en: stopped
sq: i ndalur

en: Whether the FPU has an irq vector
sq: N�se FPU posedon nj� vektor irq

en: Expand Tree
sq: Qeverise Drurin Gjinealogjik

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
sq: Piloti i vjet�r "%s" gjindet n� list�n e zez�.
    
    Shumica e personelit ka shkaktuar probleme me kernel gjat� ndaljes s� kompjuterit.
    
    Piloti i ri "%s" do t� jet� n� p�rdorim vet�m mbas nisjes s� ardh�shme.

en: Expert Mode
sq: Mod� Ekspert

en: Printer options
sq: Opcionet e stampuesit

en: Local Network adress
sq: Adresa e Rrjetit Lokal

en: Backup your System files. (/etc directory)
sq: Regjistroje Sistemin e skedareve. (repertori /etc)

en: Set the user umask.
sq: Konfigurim i umask p�r p�rdoruesin

en: You now have the opportunity to download updated packages. These packages
    have been updated after the distribution was released. They may
    contain security or bug fixes.
    
    To download these packages, you will need to have a working Internet 
    connection.
    
    Do you want to install the updates ?
sq: Tani keni mund�sin q� ti shkarkoni azhurnimet e krijuara nga
    dalja e tyre n� p�rdorim. �sht� e mundur q� t� ket� korigjime
    t� siguris� dhe rregullime t� problemeve bug.
    
    P�r ti transferuar pakot e sh�nuara, ju duhet t� posedoni nj� lidhje 
    me rrjetin internet.
    
    A d�shironi t'instaloni k�to azhurnime ?

en: Samba Server
sq: Server Samba

en: Australian Optus cable TV
sq: Kab�l TV Australiane Optus

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
sq: <Tab> para /<Alt-Tab> mbrapa  | <Space> zgedhura | <F12> ekrani tjet�r

en: Subnet:
sq: Nd�r-Rrjet:

en: Zimbabwe
sq: Zimbabve

en: When
sq: Kur

en: You need the Alcatel microcode.
    Download it at:
    %s
    and copy the mgmt.o in /usr/share/speedtouch
sq: Ju keni nevoj� p�r alcatel microcode.
    Shkarkone at� nga
    %s
    dhe kopjone mgmt.o n� /usr/share/speedtouch

en: Hour
sq: Gjdo or�

en: Second DNS Server (optional)
sq: Server DNS i Dyti (opcional)

en: Finland
sq: Finlanda

en: Color depth: %s
sq: Thell�sia e ngjyrave: %s

en: You can't unselect this package. It must be upgraded
sq: Ju nuk mund ti �zgjedhni k�t� pako. Duhet t� azhurnohet

en: Loading from floppy
sq: Ngarkimi nga disketa

en: Enable/Disable the logging of IPv4 strange packets.
sq: Aktivizoje/Blokoje logging e IPv4 n� pakot e huaja.

en: Slovenia
sq: Sllovene

en: Mouse test
sq: Test i minit

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
sq: Drakperm mund�son v�shtrimin e skedareve p�r korigjimin e autorizimeve, dhe pronarve t� grupeve falas msec.
    Ju keni mund�si ti botoni rregullat tuaja, t� cilat do ti z�vendojn� ato me marr�veshje.

en: Enter a user
    %s
sq: Fute nj� p�rdorues
    %s

en: - PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids
sq: - Mjetet PCI dhe USB: kjo list� identifikon shit�sin, mjetin, nd�r-shit�sin dhe d�r-mjetin PCI/USB ids

en: ProgressBar color selection
sq: Zgjedheni ngjyr�n e shufr�s p�rparuese

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
sq: K�to jan� hyrjet e ndryshme n� nisje udh�zuese.
    Ju mund ta shtoni ndonj� t� reja dhe ti ndryshoni hyrjet e m� parme.

en:         - Maintain /etc/dhcpd.conf:
            		To net boot clients, each client needs a dhcpd.conf entry, assigning an IP address
            		and net boot images to the machine. drakTermServ helps create/remove these entries.
    			
            		(PCI cards may omit the image - etherboot will request the correct image. You should
            		also consider that when etherboot looks for the images, it expects names like
            		boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).
    			 
            		A typical dhcpd.conf stanza to support a diskless client looks like:
sq:         - Mir�mbajtje e /etc/dhcpd.conf:
            		P�r nj� nisje me udh�zim t� klientave n� rrjet, secili klient ka nevoj�, p�r nj� hyrje t� n�nshkruar n� adres�n IP
            		dhe imazhi me nisje t� udh�zuar n� makin�. drakTermServ do t� ndihmoj� n� krijimin/zhdukjen e k�tyre hyrjeve.
    			
            		(kartela PCI mund t� largoj� imazhin - etherboot dhe ta k�rkoj� nj� imazh� korrekt. Ju duhet
            		ta konsideroni njashtu se kur etherboot i k�rkon imazhet, ai mundohet t� takoj me emra sikur
            		boot-3c59x.nbi, m� par� se boot-3c59x.2.4.19-16mdk.nbi).
    			 
            		Ajo pjes� tipike dhcpd.conf p�rkrah� nj� klient disku m� t� vog�l i cili duket sikur:

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
sq: Runs �sht� nj� servis� i cili mund�son nisjen e nj� pike punuese n� nj�
    koh� precize.

en: Radio support:
sq: P�rkrahja e radios:

en: Installing SANE packages...
sq: Intalimi i pakove SANE...

en: Change type
sq: Ndryshoje tipin

en: , USB printer #%s
sq: , stampues USB #%s

en: SILO Installation
sq: Instalimi i SILO

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
sq: Urime, instalimi mori fund.
    Nxerreni disket�n apo CD-ROM(in) dhe shtypni mbi Enter.
    
    
    P�r t� gjitha informacionet p�r korigjimet n� disponibilit� p�r k�t� version t� Linux Mandrake, duhet ta konsultoni Errata, e lir�
    nga:
    
    
    %s
    
    
    Informacionet mbi konfigurimin e sistemit tuaj jan� t� lira
    n� kapitullin e doracakut p�r p�rdorimin e Mandrake Linux

en: paranoid
sq: paranojak

en: Do not send mails when unneeded
sq: Mos i d�rgo letrat q� nuk nevojiten

en: Send mail report after each backup to:
sq: D�rgoje nj� raport me let�r mbas gjdo regjistrimi n�:

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
sq: K�t� urdh�r ju keni mund�si ta p�rdorni njashtu edhe n� zon�n "Urdh�r stampimi" n� kutin� e dialogut stampues m� me shum� aplikacione. N� k�t� rast, mos e fytni emrin e skedares p�r ta shtypur, sepse do t� furnozohet nga i nj�jti aplikacion.

en: Resolution
sq: Vendosm�ria

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
sq: Q� m� n� fund t� stamponi me stampues SMB, ju duhet t� futni emrin e serverit SMB, (kujdes, ky mund t� jet� i ndrysh�m nga ai me emrin ftues TCP/IP!) njashtu mund q� adresa IP dhe emri i stampuesit, duke marr� parasysh t� gjitha funksionet aplikuese t� p�rdoruesve, parulla e grupeve punuese �sht� e novojshme p�r t� hyr� n� at� stampues.

en:  Enabling su only from members of the wheel group or allow su from any user.
sq:  Aft�simi i super p�rdoruesit (su) vet�m nga an�taret e grupit timon apo njashtu mund�son super p�rdoruesit (su) nga secili p�rdorues.

en: reconfigure
sq: rikonfiguroje

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
sq: Kartela e juaj nuk mund t� ket� nj� nxitim mjeti n� 3D i cili p�rkrahet
    vet�m me XFree %s, SH�NIM KJO �SHT� NJ� P�RKRAHJE EKPERIMENTALE E CILA
    MUND TA BLOKOJ KOMPUTERIN TUAJ.

en: Shell timeout
sq: Koh� zgjatja e Shell

en: Xinetd Service
sq: Servisi Xinetd

en: access to network tools
sq: hyrjet n� veglat e rrjetit

en: Firmware-Upload for HP LaserJet 1000
sq: Firmware-Ngarko p�r stampues HP LaserJet 1000

en: And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos.
sq: Mandrake Linux 9.2 ju mund�son t� p�rdorni programet e vjetra dhe t� lexoni skedaret audio, njashtu edhe �faqjen e imazheve apo fotografive, dhe t� videove.

en: Here is a list of all auto-detected printers.
sq: Lista e t� gjith� stampuesve t� zbuluar automatikisht.

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
sq: Gabim gjat� instalimit aboot, 
    mundohu me instalim t� forcuar, edhe pse ai do ta shkat�rroj ndarjen e par�?

en: Restore Selected
    Files
sq: Riparoi Skedaret
    Zgjedhura

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
sq: %s, ekzistojn�, zhduki?
    
    Kujdes: N�se ju e keni b�r� k�t� procesus ju me siguri
     keni nevoj� p�r pastrimin e hyrjes nga �el�sat e autorizuiar n� k�t� server.

en: Please fill or check the field below
sq: Ju lutemi mbushni dhe verifikoni zonat plot�suese

en: Do you want to save /etc/fstab modifications
sq: A d�shironi ti registroni ndryshimet n� /etc/fstab

en: Boot Protocol
sq: Protokoli me Nisje t� Udh�zuar

en: LVM-disks %s
sq: Disqet LVM %s

en: The package %s is needed. Install it?
sq: Pakoja %s �sht� e nevojshme. Instalojeni at�?

en: On boot
sq: N� nisje t� udh�zuar (boot)

en: Bus identification
sq: Identifikues i Bus

en: Vatican
sq: Vatikane

en: Please make a backup of your data first
sq: Ju lutemi regjistroni t� dh�nat tuaja para se t� vazhdoni m� tutje

en: You have more than one hard drive, which one do you install linux on?
sq: Ju posedoni m� shum� se nj� disk t� fort (hard drive), n� cilin d�shironi ta instaloni linux?

en: Boot ISO
sq: Imazhe ISO me nisje t� udh�zuar

en: Firmware needed
sq: Nevojitet Firmware

en: Remove List
sq: Zhduke List�n

en: A customizable environment
sq: Nj� mjedis i �muesh�m

en: Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path.
sq: Disa protokole, sikur rsync, mund t� konfigurohen n� fund t� serverit. M� mir� �sht� q� t� p�rdoret repertori i shtegut, q� duhet ta p�dorni emrin 'module' p�r sh�rbimin e path.

en: Morocco
sq: Maroku

en: Which printer model do you have?
sq: Cili �sht� modeli i stampuesit tuaj?

en: Add a new printer
sq: Shtoje nj� stampues t� ri

en:           All of your selected data have been
sq:           T� gjitha t� dh�nat e zgjedhura jan�

en: Nepal
sq: Nepali

en: <-- Delete
sq: <-- Zhduke

en: chunk size
sq: madh�sia e blokut

en: If set to "ALL", /etc/issue and /etc/issue.net are allowed to exist.
    
    If set to NONE, no issues are allowed.
    
    Else only /etc/issue is allowed.
sq: N�se konfirgurohet me "GJITHA", /etc/issue dhe /etc/issue.net mund�sohen p�r ekzistenc�.
    
    N�se konfigurohet me JO, asnj� dalje nuk mund�sohet.
    
    P�rndryshe vet�m dalja /etc/issue �sht� e mund�shme.

en:  Enable/Disable sulogin(8) in single user level.
sq:  Aktivizon/Blokon sulogin(8) n� nivelin e p�rdoruesit vetiak.

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: commands before booting, or 'c' for a command-line.
sq: urdh�r p�r nisje ose mbi 'c' p�r ta p�rdorur linj�n komanduese.

en: Problems installing package %s
sq: Problemet gjat� instalimit t� pakove %s

en: You will receive an alert if the load is higher than this value
sq: Ju do t� pranoni nj� alert n�se ngarkesa e makin�s, e kalon k�t� vler�

en: 
    
    To submit a bug report, click on the button report.
    This will open  a web browser window  on https://drakbug.mandrakesoft.com
     where you'll find a form to fill in.The information displayed above will be 
    transferred to that server
sq: 
    
    P�r ta n�nshtruar nj� raport bug-i, kliko mbi kops�n raport.
    Kjo do t� hap� nj� dritare shfletuese n� https://drakbug.mandrakesoft.com
     q� nga aty, ju do t� gjeni nj� formular� p�r ta mbushur. Infomacioni i
     paraqitur
    do t� trasferohet n� server

en: Add a scanner manually
sq: Shtoje nj� skaner manualisht

en: Refresh
sq: Rifreskoje

en: Reload partition table
sq: Ringarkoje tabel�n ndar�se

en: Yes, I want autologin with this (user, desktop)
sq: Po, d�shiroj nj� autolidhje me k�t� (zgjedhje t� p�rdoruesit n� tryez�)

en: Restore Selected
sq: Riparoi t� Zgjedhurat

en: Search for fonts in installed list
sq: Hulumto p�r polisat n� list�n e instaluar

en: The Local Network did not finish with `.0', bailing out.
sq: Rrjeti Lokal nuk ka p�rfunduar me `.0', duhet ta braktisi.

en:  and the CD is in the drive
sq:  dhe CD �sht� n� lexues

en: Tuner type:
sq: Tipi tuner:

en: Now, it's time to select a printing system for your computer. Other OSs may
    offer you one, but Mandrake Linux offers two. Each of the printing system
    is best suited to particular types of configuration.
    
     * "%s" -- which is an acronym for ``print, don't queue'', is the choice
    if you have a direct connection to your printer, you want to be able to
    panic out of printer jams, and you do not have networked printers. ("%s"
    will handle only very simple network cases and is somewhat slow when used
    with networks.) It's recommended that you use "pdq" if this is your first
    experience with GNU/Linux.
    
     * "%s" - `` Common Unix Printing System'', is an excellent choice for
    printing to your local printer or to one halfway around the planet. It is
    simple to configure and can act as a server or a client for the ancient
    "lpd " printing system, so it compatible with older operating systems
    which may still need print services. While quite powerful, the basic setup
    is almost as easy as "pdq". If you need to emulate a "lpd" server, make
    sure you turn on the "cups-lpd " daemon. "%s" includes graphical
    front-ends for printing or choosing printer options and for managing the
    printer.
    
    If you make a choice now, and later find that you don't like your printing
    system you may change it by running PrinterDrake from the Mandrake Control
    Center and clicking the expert button.
sq: K�tu, ne e zgjedhim nj� sistem stampues p�r kompjuterin tuaj. Sistemet tjera
    eksploatuese ofrojn� vet�m nj�, kurse Linux ofron dy. Secili sistem stampues
    �sht� m� i mir� p�r gjdo tip i p�rcaktur konfigurues.
    
     * "%s" -- q� do t� thot� ``print, don't queue'' (stampo pas kaluar n�
    rradhitje rendore), �sht� nj� mund�si n�se stampuesi juaj �sht� i kyqur
    direkt n� stacionin tuaj punues, dhe n�se ju d�shironi ta nd�rpreni stampimin
    direkt, n� rast� t� ndonji problemi, dhe n�se nuk posedoni nj� stampues n�
    rrjet. ("%s" Do ti merr� parasysh rastet e thjeshta n� rrjet, mir�po n�
    disa raste nuk jan� t� sakta k�to urdh�rat). Zgjedheni "pdq" n�se ju jeni
    n� nj� ekspert n� GNU/Linux.
    
     * "%s" -- ``Common Unix Printing System'', �sht� mund�si gjeniale p�r
    stampim n� sistemin tuaj, me satmpues lokal, apo stampues t� cil�t gjinden n�
    an�n tjet�r t� bot�s. �sht� i thjesht� dhe mund t� reagoj sikur server, apo
    sikur nj� klient i vjet�r i sistemit stampues "lpd". B�het fjal� p�r nj�
    veg�l tejet t� fuqishme, mir�po konfiguracionet e baz�s jan� t� thjeshta sikur
    "pdq". P�r ta konkuruar n� nj� server "lpd" ju duhet t� niseni n� dimon
    "cups-lpd". "%s" p�rfshin� nj� interfac grafike p�r stampim ose p�r
    zgjedhjen e opcioneve administruese t� stampuesit.
    
    N�se e zgjidhni tani, e m� von�, nuk ju p�lqen sistemi stampues, ju keni
    mund�si ta ndryshoni duke nisur PrinterDrake nga Qendra Kontrolluese Mandrake
    duke klikuar mbi kops�n ekspert.

en: "Menu" key
sq: �el�si "Menu"

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or "Raw printer" is highlighted.
sq: 
    
    Ju lutemi verifikoni, n�se Printerdrake e ka zbuluar-automatikisht stampuesin tuaj n� m�nyr� korrekte. K�rkojeni modelin e v�rtet� n� at� list� n�se kursori q�ndron n� n� model t� gabuar apo n� "Stampues Raw".

en: Security Administrator:
sq: Siguria e Administratorit:

en: Set the shell timeout. A value of zero means no timeout.
sq: Konfiguroje koh�n dal�se t� shell. Vlera zero d.m.th. asnj� koh� dal�se.

en: Firmware copy succeeded
sq: Kopjim i suksesh�m i Firmware

en: if set to yes, check permissions of files in the users' home.
sq: n�se konfigurohet me po, verifikoji lejimet e skedareve n� p�rdoruesit' home.

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
sq: Ju nuk posedni nj� lidhje internet.
    Krijone nj� duke klikuar mbi 'Konfiguro'

en: Fonts copy
sq: Kopjoi polisat

en: Automated
sq: Automatizuar

en: Do you want to test the configuration?
sq: A d�shironi ta testoni konfigurimin?

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
sq: Stampuesi "%s" �sht� t�rhjekur me sukses nga Star Office/OpenOffice.org/GIMP.

en: Save packages selection
sq: Regjistroi pakot e zgjedhura

en: /_Actions
sq: /_Akcionet

en: Remove the last item
sq: Zhduke elementin e fundit

en: User list to restore (only the most recent date per user is important)
sq: P�rdore list�n p�r ta riparuar (vet�m m� t� fresk�tat q� jan� p�r p�rdoruesin)

en: No net boot images created!
sq: Asnj� imazhe i krijuar me nisje t� udh�zuar n� rrjet!

en: use pptp
sq: p�rdore pptp

en: Choose which services should be automatically started at boot time
sq: Zgjedhni sh�rbimet q� duhet t� nisen automatikisht� n� nisjen e sistemit

en: Check files/directories writable by everybody
sq: Verifikoji skedaret/repertor�t e shkruesh�m nga secili person�.

en: Learn how to use this printer
sq: M�so mbi p�rdorimin e k�tij stampuesi

en: Configure the network now
sq: Konfoguroje rrjetin tani

en: Choose a mirror from which to get the packages
sq: Zgjedheni nj� pasqyre nga e cila do ti transferoni pakot

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
sq: Programi i ridimenzionimit p�r ndarjet FAT nuk mund ta qeveris�
    ndarjen tuaj. Gabimi me radh� �sht� paraqitur: %s

en: Size:
sq: Madh�sia:

en: Which sector do you want to move it to?
sq: Mbi cilin sektor d�shironi t� vendoseni?

en: Do you want to click on this button?
sq: A d�shironi t� klikoni mbi k�t� kops�?

en: Manual configuration
sq: Konfigurimi manuel

en: search
sq: hulumto

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
sq: Kjo pako aktivizon nj� disponibilitet t� tastier�s s� p�rcaktuar n� skedaren
    /etc/sysconfig/keyboard. Kjo mund t� zgjidhet duke p�rdorur kbdconfig.
    Ky servise duhet t� jet� i aktivizuar n� shumic�n e makinave.

en: Xpmac (installation display driver)
sq: XPmac (instalimi i pilotit �faq�s)

en: Zeroconf host name must not contain a .
sq: Konfigurimi zero me em�r t� ftuesit nuk duhet t� p�rmbaj� a .

en:  Accept/Refuse icmp echo.
sq:  Prano/Refuzo echon icmp.

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
sq: Syslog �sht� nj� servise i cili p�rdoret nga shum� servise tjera p�r t�
    regjistruar raportet aktive. �dht� nj� ide tejet e mir� q� t� jet� i aktivizuar gjithnj�.

en: Unknown/Others
sq: I pa njoftur/Tjer�t

en: No TV Card detected!
sq: Asnj� kartel� e zbuluar TV

en: Options
sq: Opcionet

en: The printer "%s" is set as the default printer now.
sq: Stampuesi  "%s" tani �sht� stampues me marr�vshje.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
sq: Ju jeni duke konfiguruar nj� stampues lazer OKI winprinter. K�ta stampues
    p�rdorin nj� protokol t� komunikimit special, dhe funlsionojn� vet�m n�se ata jan� t� lidhur n� port�n e par� paralele. N�se stampuesi i juaj �sht� i lidhur n� nj� port� apo server tjet�r stampimi, at�her� ju duhet ta kyqni n� port�n e par� paralele para se ta stamponi faqen e testit. Pa k�t�, stampuesi nuk do t� funksionon, dhe t� gjith� parametrat lidh�s do t� injorohen nga piloti.

en: generation of the cpu (eg: 8 for PentiumIII, ...)
sq: prodhues i cpu (p.sh: 8 p�r PentiumIII, ...)

en: Auto-detected
sq: Auto-zbuluar

en: You are about to configure your computer to install a PXE server as a DHCP server
    and a TFTP server to build an installation server.
    With that feature, other computers on your local network will be installable using this computer as source.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
sq: Ju jeni duke konfiguruar kompjuterin tuaj, p�r instalimin e serverit PXE si server DHCP
    dhe server TFTP n� nd�rtimin e nj� serveri instalues.
    Me k�t� ve�ori, kompjuterat e tjer� n� rrjetin tuaj lokal, kan� mund�si ta p�rdorin k�t� lidhje t� Internetit nga ky kompjuter.
    
    Sigurohuni se ju e keni konfiguruar hyrjen tuaj t� Rrjetin/Internet duke p�rdorur drakconnect, para se t� vazhdoni m� tutje.
    
    Sh�nim: ju keni nevoj� p�r nj� Rrjet t� P�rshtatur dhe t� dedikuar p�r rregullimin e Zon�n e Rrjetit Lokal (LAN).

en: OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.
    What's more, OSS drivers all reinvent the wheel.
    
    ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
    supports quite a large range of ISA, USB and PCI cards.
    
    It also provides a much higher API than OSS.
    
    To use alsa, one can either use:
    - the old compatibility OSS api
    - the new ALSA api that provides many enhanced features but requires using the ALSA library.
sq: OSS (Open Sound System) �sht� nj� API fillestar sonor. Dhe �sht� multi plate-form� (n� shumic�n e sistemeve eksploatuese UNIX(tm)) mir�po �sht� i kufizuar me nivele t� ulta.
    Njashtu t� gjith� pilot�t OSS e kan� rishpikur� rrot�n.
    
    ALSA (Advanced Linux Sound Architecture) �sht� nj� ar�itektur� e moduleve q�
    p�rmban nj� num�r t� madh� kartelash ISA, USB dhe PCI.
    
    Ajo funrnizon njashtu edhe nj� API me nivel tejet m� t� lart� se sa OSS.
    
    P�r ta p�rdorur ALSA, �sht� e mundur t� p�rdoret:
    - kontabiliteti me API OSS t� vjet�r
    - dhe API ALSA e re q� furnizon nj� num�r t� madh� t� mund�sive n� p�rparim mir�po i nevojitet biloteka ALSA.

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
sq: Nuk ka hep�sir� t� lir�, p�r ndarjen me nisje t� udh�zuar (bootstrap) me 1MB!Instalimi do t� vazhdoj, ju duhet t� krijoni nj� ndarje me nisje t� udh�zuar(bootstrap) n� DiskDrake

en: Please choose the printer you want to set up or enter a device name/file name in the input line
sq: Ju lutemi zgjedheni stampuesin i cili duhet t� rregullohet, ose futni emrin/skedaren e mjetit n� linj�n hyr�se

en: Refuse
sq: Rrefuzo

en: LOCAL
sq: LOKAL

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
sq: HardDrake nis� zbulues t� materialit, dhe konfiguron
    materialin e ri t� gjetur gjat� hetimit.

en: Creating and formatting file %s
sq: Krijimi dhe formatimi i skedares %s

en: if set to yes, check additions/removals of sgid files.
sq: n�se konfigurohet me po, verifikoji mbledhjet/e zhdukura t� skedareve sgid.

en: The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
sq: Stampuesi HP LaserJet 1000 ka navoj� p�r firmware p�r tu ngrakuar mbasi q� t� niset. Shkarkoni pakot me pilot� Windows nga faqja Web HP (firmware n� CD e stampuesve nuk do t� funksionojn�) dhe ekstraktoje skedaren firmware nga ai duke dekompresuar ekstraktuesin-e-vehtveht�s '.exe' me skedare 'unzip' lev�rdia dhe k�rkimi p�r skedaren 'sihp1000.img'. Kopjone k�t� skedare n� repertorin '/etc/printer'. Mandej do t� zbulohet automatikisht skripti ngarkues i cili do t� ngrakohet gjdo her� kur stampuesi lidhet dhe nisetn� at� makin�.

en: Choose an existing LVM to add to
sq: Zgjedheni nj� LVM ekzistues p�r ta shtuar n�

en: xfs restart
sq: rinisja e xfs

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
sq: Stampuesi "%s" ekziston m� heret,
    a d�shironi me t� v�rtet� ta z�vend�soni k�t� konfigurim?

en: No partition available
sq: Asnj� ndarje e lir�

en: Use the scanners on hosts:
sq: P�rdori skaner�t n� ftuesit:

en: Unselected All
sq: Gjitha t� �zgjedhurat

en: Printer Management
sq: Menagjer i Stampuesit

en: Domain Name Resolver
sq: Zgjedh�s i Emrit me Pron�

en: Encryption key (again)
sq: �el�s kriptues (v�rtetim)

en: Samba share name missing!
sq: Emri shp�rndar�s Samba mungon!

en: True Type install done
sq: Instalimi True Type p�rfundoi

en: Detection in progress
sq: Zbulimi n� vazhdim e sip�r

en: Build Whole Kernel -->
sq: Nd�rtoje B�rtham� t� plot� -->

en: modem
sq: modemi

en: Welcome to %s
sq: Mir�sevini n� %s

en:  drakhelp 0.1
    Copyright (C) 2003 MandrakeSoft.
    This is free software and may be redistributed under the terms of the GNU GPL.
    
    Usage:
sq:  drakhelp 0.1
    E drejt� e autorit (C) 2003 MandrakeSoft.
    Ky �sht� nj� software gratis dhe mund t� shp�rndahet nd�r termet e GNU GPL.
    
    P�rdorimi:

en: Please insert the Update Modules floppy in drive %s
sq: Ju lutemi futni disket�n e Azhurnimit t� Moduleve n� lexues %s

en: Bootsplash
sq: Imazh gjat� nisjes me udh�zim

en: The following printer
    
    %s%s
    is directly connected to your system
sq: Stampuesi i radhitur
    
    %s%s
    �sht� i lidhur direkt n� sistemin tuaj

en: Printer sharing on hosts/networks:
sq: Shp�ndarje e Stampuesit n� ftues/rrjet:

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
sq: 
    Urdh�ri "%s" mund�son njashtu ti ndryshoni parametrat e stampimit p�r nj� shtypje t� veqant�. �sht� e mjaftueshme q� ti shtoni parametrat e d�shiruar mbi linj�n komanduese. P�r shembull "%s <skedare>".

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
sq: N� disa raste, piloti %s ka nevoj� p�r mund�si shtuese
    q� t� funksionon m� mir�. A d�shironi ti specifikoni
    opcionet shtuese p�r zbulimin me doracak apo n� m�nyr� automatike.
    Ky zbulim mund ta blokoj kompjuterin tuaj,
    mir�po nuk shkakton ndonj� d�m n� t�.

en: Not the correct CD label. Disk is labelled %s.
sq: Nuk �sht� nj� CD korrekte. Ky Disk �sht� i etiketuar me %s.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
sq: Mir�sevini n� p�rdorimin e Shp�rndarjes s� lidhjes internet!
    
    %s
    
    Klikoni mbi Konfiguro p�r ta nisur asistentin e konfigurimit.

en: Cuba
sq: Kuba

en: October
sq: tetor

en: Belize
sq: Belizi

en: Searching for new printers...
sq: Hulumtimi p�r stampues t� ri...

en:  (multi-session)
sq:  (multi-sesion)

en: Kernel Boot Timeout
sq: Afat i nisjes udh�zuese t� b�rtham�s

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
sq: Kartela juaj mund ta p�rdor� materialin 3D t� nxituar mir�po vet�m n�
    p�rdorim t� XFree %s. Kartela juaj ka p�rkrahje XFree %s por mund t� ket�
    nj� p�rkrahje m� t� mir� n� 2D.

en:  Activate/Disable daily security check.
sq:  Activizoje/Blokoje verifikim sigurie n� gjdo dit�.

en: Enable libsafe if libsafe is found on the system
sq: Aktovizoje libsafe shp�tuese p�r librarin� q� gjindet n� sistem

en: The DrakX Partitioning wizard found the following solutions:
sq: DrakX me asistentin shp�rndar�s ka gjetur k�to zgjedhje:

en: Hungarian
sq: Hungarisht�

en: Select your provider.
    If it isn't listed, choose Unlisted.
sq: Zgjedheni furnizuesin tuaj hyr�s.
    N�se nuk �sht� i listuar, zgjedheni T�-Pa-Listuar.

en: Automatic time synchronization (using NTP)
sq: Sinkronizimi automatik i or�s (via NTP)

en: Use my Windows partition
sq: P�rdore ndrajen time Windows

en: LDAP Server
sq: Server LDAP

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
sq: PCMCIA mund�son p�rdorimin e mjeteve PCCARD si p�r shembull ethernet dhe
    modem n� kompjuter celular�. Ky servis nuk do t� niset pas u konfigururar n� m�nyr� korrekte.
    I cili mund t� aktivizohet pa kurr�far� rreziku edhe n�se nuk e posedoni k�t� mjet.

en: Choose your country
sq: Zgjedheni shtetin tuaj

en: 
    - System Files:
sq: 
    - Skedare t� Sistemit:

en:         - Per client system configuration files:
            		Through clusternfs, each diskless client can have its own unique configuration files
            		on the root filesystem of the server. By allowing local client hardware configuration, 
    				clients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, 
            		/etc/sysconfig/keyboard on a per-client basis.
    
            Note: Enabling local client hardware configuration does enable root login to the terminal 
            server on each client machine that has this feature enabled.  Local configuration can be turned
            back off, retaining the configuration files, once the client machine is configured.
sq:         - Sistemi konfigurues i skedareve p�r secilin klient:
            		N�p�r clusternfs, secili klient me disk t� vog�l mund t� posedoj nj� konfigurim t� veqant� n� skedare
            		n� sistemin e skedareve root n� server. N� t� ardhm�n drakTermServ drakTermServ do t� ndihmoj� n� krijimin e k�tyre skedareve
            		si p�r shembull /etc/modules.conf, /etc/sysconfig/mouse, 
            		/etc/sysconfig/keyboard n� secilin klient t� tbazuar.
    
            Sh�nim: lejimi i konfigurmit t� materialit nga ana e klientave, nuk ka nevoj� p�r nj� lidhje administratori, n� terminal serveri 
            n� secilin klient t� makin�s, kjo mund�si do t� jet� n� disponim. Konfigurimi lokal mund t� kthehet mbrapa,
            p�rkrahja e konfigurimit t� skedares, mbasi q� makina e klientit �sht� konfiguruar me par�.

en: Standalone Tools
sq: Veg�l Autonome

en: Where
sq: Ku

en: but not matching
sq: mir�po nuk p�rputhet

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
sq: K�tu ju mund ti zgjidhni pilot�t alternativ (OSS apo ALSA) p�r kartel�n tuaj t� z�rit (%s).

en: Configuring PCMCIA cards...
sq: Konfigurimi i kartel�s PCMCIA...

en: kdesu missing
sq: kdesu mungon

en: %s: %s requires a username...
sq: %s: %s emri i ftuesit t� d�shiruar...

en: Encryption key
sq: �el�s kriptues

en: Christmas Island
sq: Ishujt e Krist�lindjes

en: Installation of bootloader failed. The following error occured:
sq: Instalimi i programit me nisje t� udh�zuar d�shtoi. Gabimi i radhitur �sht�:

en: EIDE/SCSI channel
sq: EIDE/Kanali SCSI

en: Set this printer as the default
sq: Zgjedhe si stampues me marr�veshje

en: Verify that %s is the correct path
sq: Verifikoni n�se %s �sht� shteg i rregullt

en: partition %s
sq: ndarja %s

en: Paranoid
sq: Paranojak

en: <-- Del User
sq: <-- Zhduke P�rdoruesin

en: Location on the bus
sq: Pozita n� bus

en: No printer found!
sq: Asnj� stapues i gjetur!

en: the vendor name of the device
sq: emri i shit�sit t� k�tij periferiku

en: Erase entire disk
sq: Shlyeje diskun t� t�r�si

en:  (Default)
sq:  (Me marr�veshje)

en: Automatic reconfiguration
sq: Rikonfigurim automatik

en: Receiving Speed:
sq: Shpejt�sia Pranuese:

en: Turks and Caicos Islands
sq: Turke dhe Ishujt e Kaikos

en: No Ip
sq: Asnj� Ip

en: <- Previous
sq: <- Mbrapa

en: Transfer Now
sq: Transferoni  Tani

en: Set root password and network authentication methods
sq: Rregullone parull�n root dhe t� rrjetit, p�r ti v�rtetuar metodat

en: Internet Connection Sharing configuration
sq: Konfigurim i shp�rndarjes s� lidhjes internet

en: Toggle between flat and group sorted
sq: Kalo mes radhitjes alfabetike dhe grupore

en: Themes
sq: Temat

en: Options: %s
sq: Opcionet: %s

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
sq: Ju jeni duke p�rdorur momentalisht sistemin eksploatues t� qeverisur nga %s.Klikoni mbi Konfigurim p�r t� ndryshuar list�n e nisjes me udh�zim.

en: OKI winprinter configuration
sq: Konfigurimi i stampuesit OKI winprinter

en: Saint Helena
sq: Helena e Shenj�t

en: Parallel port #%s
sq: Porta paralele #%s

en: Security Level
sq: Nivel i Siguris�

en: Some steps are not completed.
    
    Do you really want to quit now?
sq: Disa etapa nuk kan� p�rfunduar.
    
    A d�shironi me t� v�rtet� ti braktisni tani?

en: Sudan
sq: Sudanit

en: Polish (qwertz layout)
sq: Polonishte (qwertz)

en: Syria
sq: Siries

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
sq: A �sht� stampuesi juaj multi-funksionues nga mjetet HP apo Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 me skaner, DeskJet 450, Sony IJP-V100), n� HP PhotoSmart ose n� HP LaserJet 2200?

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
sq: Mir�sevini n� %s, ngarkues i sistemit eksploatues t� caktuar!
    
    Zgjedheni nj� sistem eksploatimi n� list�n e posht� sh�nuar
    ose pritni %d sekonda p�r nisje me marr�veshje.

en: Portuguese
sq: Portugeze

en: Loopback file name:
sq: Emri i skedares loopback:

en: DNS server address should be in format 1.2.3.4
sq: Adresa i port�s hyr�se DNS duhet t� jet� sikur 1.2.3.4

en: Left Control key
sq: Kops� e Majt� Kontroluese

en: Serbia
sq: Serbe

en: Newzealand
sq: Zelanda e Re

en: This directory should remain within the root filesystem
sq: Ky repertor duhet t� q�ndroj n� ndarjen rr�nj�zore t� sistemit t� skedareve

en: Across Network
sq: n�p�r Rrjet

en: CapsLock key
sq: Kopsa CapsLock (shkronja t� m�dha shtypi)

en: Install bootloader
sq: Instalim i bootloader

en: Select the memory size of your graphics card
sq: Zgjedheni medh�sin� e memoris� e kartel�s tuaj grafike

en: Enable/Disable crontab and at for users.
    
    Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)
    and crontab(1)).
sq: Aktivizoje/Blokoje tabel�n-cron (crontab) dhe at p�r p�rdoruesit.
    
    Futi p�rdoruesit e mundsh�m n� /etc/cron.allow dhe /etc/at.allow
    (shiqo doracakun (man) at(1) dhe crontab(1)).

en: [OPTIONS]
    Network & Internet connection and monitoring application
    
    --defaultintf interface : show this interface by default
    --connect : connect to internet if not already connected
    --disconnect : disconnect to internet if already connected
    --force : used with (dis)connect : force (dis)connection.
    --status : returns 1 if connected 0 otherwise, then exit.
    --quiet : don't be interactive. To be used with (dis)connect.
sq: [OPTIONS]
    Lidhja e Rrjetit & Internetit dhe aplikacioni v�shtrues
    
    --defaultintf interface : �faqe k�t� interfac me marr�veshje
    --connect : lidhu n� intenet n�se nuk �sht� i lidhur
    --disconnect : shk�putu nga inteneti n�se nuk �sht� i shk�putur
    --force : p�rdoret me (�)lidhje : forc� (�)lidhje.
    --status : p�rgjigju me 1 n�se �sht� i lidhur, p�rndryshe 0, mandej dil.
    --quiet : nuk duhet t� jet� interactive. T� p�rdoret me (�)lidhje.

en: Dynamic IP Address Pool:
sq: Adres� Dinamike IP e Grumbulluar�:

en: LVM name?
sq: Em�r LVM?

en: Some devices in the "%s" hardware class were removed:
sq: Disa mjete n� list�n e klas�s "%s" jan� zhdukur:

en: Found %s %s interfaces
sq: Interfac %s %s i gjetur

en: Post Install
sq: Instaloje Postin

en: The internal domain name
sq: Emri i pron�s s� mbredshme

en: Card IRQ
sq: Kartela IRQ

en: Font Importation and monitoring application                                     
    --windows_import : import from all available windows partitions.
    --xls_fonts      : show all fonts that already exist from xls
    --strong         : strong verification of font.
    --install        : accept any font file and any directry.
    --uninstall      : uninstall any font or any directory of font.
    --replace        : replace all font if already exist
    --application    : 0 none application.
                     : 1 all application available supported.
                     : name_of_application like  so for staroffice 
                     : and gs for ghostscript for only this one.
sq: Importimi i Polis�s dhe v�shtrimi aplikacion                                     
    --windows_import : importo nga te gjitha ndarjet e lira t� windows.
    --xls_fonts      : �faqi t� gjitha polisat q� ekzistojn� nga xls
    --strong         : verifikim i plot� fuqish�m i polis�s.
    --install        : pranoje gjdo polis� t� skedares dhe t� repertorit.
    --uninstall      : dezinstaloje gjdo polis� apo gjdo repertor t� polis�s.
    --replace        : z�vend�soje gjdo polis� n�se ka ekzistuar m� par�
    --application    : 0 asnj� aplikacion.
                     : 1 t� gjitha aplikacionet e lira p�rkrahen.
                     : emri_i_aplikacion sikur p�r staroffice 
                     : dhe gs p�r ghostscript vet�m p�r k�t�.

en: Choose the floppy drive you want to use to make the bootdisk
sq: Zgjedheni nj� floopy lexues p�r ta p�rdorur n� krijimin e nj� diskete boot

en: LILO with text menu
sq: LILO n� mod� teksti

en: Everything (no firewall)
sq: Gjith�ka (asnj� mur-i-zjarrt�)

en: You must specify a kernel image
sq: Ju duhet t� specifikoni imazhin e b�rtham�s

en: , multi-function device on USB
sq: , periferik multi-funksionel n� USB

en: Do
sq: B�je

en: Contacting the mirror to get the list of available packages...
sq: Transferimi i list�s s� pasqyreve me pako t� lira...

en: Lithuanian AZERTY (old)
sq: Lituanis� AZERTY (e vjet�r)

en: Brazilian (ABNT-2)
sq: Brazilishte (ABNT-2)

en: IP address of host/network:
sq: Adresa IP e ftuesit/rrejtit:

en: the progress bar y coordinate
    of its upper left corner
sq: koordinatat n� y, n� k�ndin e lart� t� majt�
    n� shufr�n p�rparuese

en: System installation
sq: Instalimi i sistemit

en: Saint Vincent and the Grenadines
sq: Vincenti i Shenj� dhe Grenadina

en: Allow/Forbid reboot by the console user.
sq: Mund�so/Ndalo rinisjen e konsoll�s s� p�rdoruesit.

en: /File/_Open
sq: /Skedare/_Hape

en: Location of auto_install.cfg file
sq: Lokalizimi i skedares auto_install.cfg

en: Open Firmware Delay
sq: Afat i Open Firmware

en: Hungary
sq: Hungaria

en: New Zealand
sq: Zelanda e Re

en: Color configuration
sq: Konfigurimi i ngjyrave

en: There are already some restrictions, and more automatic checks are run every night.
sq: Posedon disa kufizime, dhe verifikime automatike q� b�hen gjdo nat�.

en: please choose the date to restore
sq: ju lutemi zgjedheni dat�n p�r riparim

en: Netherlands Antilles
sq: Holanda e Atiles

en: Switching from ext2 to ext3
sq: Kalim nga ext2 n� ext3

en: Browse to new restore repository.
sq: Lundro n� nj� vend� t� ri regjistrues.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
sq: 
    Mir�sevini n� Asistentin p�r Konfigurimin e Stampuesit
    
    Ky asistent ju mund�son konfigurimin e stampuesve lokal dhe n� rrjet, q� m� n� fund, t� p�rdoren nga kjo makin�, njashtu edhe nga makinat tjera t� rrejtit.
    
    T� gjitha informacionet p�rkat�se p�r ta konfiguruar stampuesin do t� k�rkohen nga ju: ju keni mund�si t� hyni n� pilot�t e stampuesve disponible njashtu dhe t� gjitha mund�sit� dhe m�nyrat e lidhjeve t� tyre.

en: and %d unknown printers
sq: dhe %d stampues t� pa njoftur

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
sq: Prodhimet e qipeve m� t� hershme Intel Pentium kan� nj� bug n� pik�n lundruese t� procesorit i cili nuk arkivon me precizitetin kur arrin p�parimi i Lundruesit n� pik�n DIVision (FDIV)

en: Backup quota exceeded!
    %d MB used vs %d MB allocated.
sq: Kuota backup kaloi!
    %d Mb jan� shfryt�zuar vs %d Mb jan� huazuar.

en: No ISDN PCI card found. Please select one on the next screen.
sq: Asnj� kartel� e gjetur PCI ISDN. Ju lutemi zgjedheni nj�r�n n� ekranin e ardhsh�m.

en: Please give a user name
sq: Ju lutemi shkruani nj� em�r p�r p�rdoruesin

en: Enable CD Boot?
sq: Autorizoje nisjen nga CD?

en:  enter `void' for void entry
sq:  hyni `void' p�r nj� hyrje t� zbraz�t

en: Backups on unmountable media - Use Catalog to restore
sq: Backups n� burim t� pa montuar - P�rdore Katalogun p�r ta riparuar

en: January
sq: janar

en: Password history length
sq: Gjat�sia parull�s s� historis�

en: Winmodem connection
sq: Lidhje me Winmodem

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
sq: 
    Urime, stampuesi juaj �sht� instaluar dhe konfiguruar!
    
    Ju mund t� stamponi duke p�rdorur urdh�rin� "Stampo" n� aplikacionin tuaj (m� s� shpeshti gjindet n� meny "Skedare").
    N�se ju d�shironi, t� shtoni, zhdukni, apo t� riemroni nj� satmpues, ose d�shironi tia ndryshoni opcionet e tij me marr�veshje (hyrja e letr�s, kualiteti i stampimit, etj) shkoni tek "Stampuesi" n� zgjedhjen "Materiali" tek seksioni Qendra Kontrolluese Mandrake.

en: Now, you can run xawtv (under X Window!) !
sq: Tani, ju mund t� nisni xawtv (nd�r X Windows) !

en: Not enough swap space to fulfill installation, please add some
sq: Hap�sira swap nuk �sht� e mjaftueshme p�r nj� instalim t� plot, ju lutemi shtone nj� sasi t� vog�l

note: -PO: example: lilo-graphic on /dev/hda1
en: %s on %s
sq: %s mbi %s

en: Allow/Forbid remote root login.
sq: Mund�so/Ndalo lidhje root t� larg�t.

en: GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to
    local time according to the time zone you selected. If the clock on your
    motherboard is set to local time, you may deactivate this by unselecting
    "%s", which will let GNU/Linux know that the system clock and the
    hardware clock are in the same timezone. This is useful when the machine
    also hosts another operating system like Windows.
    
    The "%s" option will automatically regulate the clock by connecting to a
    remote time server on the Internet. For this feature to work, you must have
    a working Internet connection. It is best to choose a time server located
    near you. This option actually installs a time server that can used by
    other machines on your local network as well.
sq: GNU/Linux manipulon or�n n� GMT (Greenwich Mean Time) dhe e sh�nd�rron n�
    koh� lokale simbas zon�s t� cil�n ju e zgjidhni. N�se ora n� kartel�n-n�n�
    rregullohet simbas� koh� lokale, ju keni mund�si ta dezaktivizoni at� duke
    �zgjedhur "%s" i cili do t� ju lejoj q� GNU/Linux sistemi i or�s dhe i
    or�s hardver t� jen� n� t� nj�jt�n koh�. Kjo �sht� tejet e p�rdorshme kur
    makina apo edhe ndonji ftues tjet�r sikur p.sh. Windows.
    
    "%s" mund�son rregullimin e or�s automatikisht duke u lidhur ne nj� server
    t� koh�s n� Internet. N� list�n e cila �sht� prezentuar, zgjedheni nj�
    server gjeografikisht  m� af�r jush. Ju duhet t� posedoni nj� kyqje Internet,
    q� ky t� funksionoj si duhet. Ky do t� instaloj n� makin�n tuaj, nj� server
    t� koh�s lokale, i cili mund t� jet� i mundsh�m, q� ai t� p�rdoret nga
    p�rdoruesit e tjer� t� k�saj makine, nga rrjeti i juaj lokal

en: Which is your timezone?
sq: Cila �sht� zona e juaj orare?

en: Can't create log file!
sq: Nuk mund ta krijoj skedaren lidh�se!

en: Use .backupignore files
sq: P�doreni skedaren .backupignore

en: The system is now connected to the Internet.
sq: Sistemi tani �sht� i lidhur n� Internet.

en: South Georgia and the South Sandwich Islands
sq: Gjeorgjia Veriore dhe Ishujt Sandwich t� Jugut

en: Japan (broadcast)
sq: Japonia (transmetim)

en: Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
sq: Monitori
    
       Instaluesi ka mund�si ta zbulon dhe ta konfigoj automatikisht monitorin
    tuaj t� lidhur n� kompjuter. N�se ai nuk konfigurohet automatikisht, ju keni
    mund�si ta zgjidhni monitorin tuaj nga kjo list�.

en: Mozambique
sq: Mazambiku

en: Icon
sq: Ikona

en: Please choose what you want to backup
sq: Ju lutemi zgjedhni se �far� d�shironi t� regjistroni

en: 256 colors (8 bits)
sq: 256 ngjyra (8 bits)

en: Read-write
sq: Lexim-shkrimi

en: Size: %s
sq: Madh�sia: %s

en: Hostname:
sq: Emri ftues:

en: Add a rule
sq: Shtoje nj� rregull�

en: Chunk size %s
sq: Madh�sia e blokut %s

en: Build the future of Linux!
sq: Nd�rtoni nj� ardhm�ri Linux!

en: Local Printer
sq: Stampues Lokal

en: Floppy access error, unable to mount device %s
sq: Gabim hyr�s n� floppy, i pa mudnur montimi mbi mjetin %s?

en: ADSL connection
sq: Lidhja ADSL

en: No configuration, please click Wizard or Advanced.
sq: Asnj� konfigurim, klikoni mbi Asistentin apo mbi t� P�rpar�m.

en: Error!
sq: Gabim!

en: cable connection detected
sq: zbulim i lidhjes kab�ll

en: Permission denied transferring %s to %s
sq: Nuk keni t� drejt� ta transaferoni %s n� %s

en: /_Report Bug
sq: /_Raport Bug(i)

en: Dominica
sq: Dominika

en: Resize
sq: Ridimenziono

en: Resolution: %s
sq: Vendosm�ria: %s

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
sq: Nuk mund t� hyj� n� modulet t� cilat i p�rkasin b�rtham�s suaj (skedarja %s mungon), kjo zakonisht do t� thot� se disketa juaj me nisje t� udh�zuar nuk sinkronizohet, me burimin instalues (ju lutemi krijoni nj� disket� t� re)

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
sq: Ju lutemi zgjedheni port�n e sakt�. P�r shembull "COM1" �sht� port� nd�r
    Windows, kurse "ttyS0" �sht� i em�ruar nd�r sistemin GNU/Linux.

en: The following packages are going to be removed
sq: Pakot e radhitura do t� zhduken

en: Connect to the Internet
sq: Lidhje n� Internet

en: Use existing partitions
sq: P�rdori ndarjet ekzistuese

en: Canadian (Quebec)
sq: Kanadeze (Kebek)

en: Mouse device: %s
sq: Mjeti min: %s

en: Reselect correct fonts
sq: Rizgjedhi polisat korrekte

en:         - /etc/xinetd.d/tftp:
            		drakTermServ will configure this file to work in conjunction with the images created by
            		mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each
            		diskless client.
    
            		A typical tftp configuration file looks like:
            		
            		service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            		}
            		
            		The changes here from the default installation are changing the disable flag to
            		'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
            		puts its images.
sq:         - /etc/xinetd.d/tftp:
            		drakTermServ do t� konfiguroj k�t� skedare t� funksionoj n� bashkim me imazhet e krijuara nga
            		mkinitrd-net, dhe t� hyrjeve n� /etc/dhcpd.conf, p�r te servuar secilin imazhe me nisje t� udh�zuar
            		t� nj� klienti me disk t� vog�l.
    
            		Nj� konfigurim tipik i skedares tftp duket sikur:
            		
            		service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            		}
            		
            		Ndryshimet k�tu nga instalimi me marr�veshje kan� nd�rruar shenjat e lira n�
            		'no' nd�rrimin e repertorit me shtegn� /var/lib/tftpboot, ku mkinitrd-net
            		fut� imazhet e saja.

en: Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
sq: Opcionet
    
        M� n� fund, ju keni mund�si t� zgjedhni nisjen e interfacit grafik
    apo t� makin�s suaj. �sht� tejet e rekomanduar q� ta zgjidhni "%s" n�se
    ju jeni duke instaluar njashtu edhe nj� server n� makin�n tuaj, ose n�se
    ju nuk keni konfiguruar ekranin tuaj si duhet.

en: MandrakeExpert Corporate
sq: Kooperacioni MandrakeExpert

en: Write protection
sq: Shkruaje n� mbrojtje

en: You've not selected any font
sq: Ju nuk keni zgjedhur ndonji polis�

en: Language
sq: Zgjedheni gjuh�n tuaj

en: Printer model selection
sq: Zgjedhja e modelit t� stampuesit

en: After changing type of partition %s, all data on this partition will be lost
sq: Mbas nd�rrimit t� tipit t� k�saj ndarje %s, t� gjitha t� dh�nat n� k�t� ndarje do t� zhduken

en: %d seconds
sq: %d sekunda

en: Insert a blank floppy in drive %s
sq: Futni nj� disket� t� zbraz�t n� lexuesin e disketave %s

en: A valid URI must be entered!
sq: Nj� adres� e pranueshme duhet t� futet!

en: Found "%s" interface do you want to use it ?
sq: Interfac i gjetur "%s" a d�shironi ta p�rdorni at� ?

en: Re-configure interface and DHCP server
sq: Rikonfiguroje interfasin dhe serverin DHCP

en: Sound configuration
sq: Konfigurimi i z�rit

en: Photo test page
sq: Faqe testi foto

en: Custom disk partitioning
sq: Shp�rndarje e personalizuar

en: Enter Printer Name and Comments
sq: Futni Emrin e Stampuesit dhe Komentimet

en: The following printers
    
    %s%s
    are directly connected to your system
sq: Stampuesit e radhitur
    
    %s%s
    jan� t� lidhur direkt n� sistemin tuaj

en: You don't have any winmodem
sq: Ju nuk posedoni asnj� winmodem

en: type: %s
sq: tipi: %s

en: Slovakian (QWERTY)
sq: Slovakishte (QWERTY)

en: This should be a comma-separated list of local users or email addresses that you want the backup results sent to. You will need a functioning mail transfer agent setup on your system.
sq: Kjo duhet t� jet� nj� presje ndar�se dhe lista e p�rdoruresve lokal apo adresave e-mail t� cilat ju d�shironi q� rezultatet backup t� d�rgohen n� t�. Ju do t� keni nevoj� p�r nj� e-mail q� ta transferoni agjetin instalues n� sistemin tuaj.

en: No Sound Card detected!
sq: Asnj� Kartel� e Z�rit s'�sht� zbuluar!

en: Mouse Port
sq: Porta e Minit

en: Check for unsecured accounts
sq: Verifikim i llogarive t� pas siguruara

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
sq: Ka nevoj� p�r rinisje q� ta �faq� Qeverisjen e plot� t� ndryshimeve dhe p�r ti pranuar efektet. (servisi dm riniset - n� kosol�)

en: Ftp Server
sq: Server Ftp

en: Uganda
sq: Ugande

en: %s fonts conversion
sq: Sh�nd�rrimet e polis�s %s

en: the type of bus on which the mouse is connected
sq: tipi bus, n� t� cilin �sht� lidhur mini i juaj

en: As a review, DrakX will present a summary of information it has about your
    system. Depending on your installed hardware, you may have some or all of
    the following entries. Each entry is made up of the configuration item to
    be configured, followed by a quick summary of the current configuration.
    Click on the corresponding "%s" button to change that.
    
     * "%s": check the current keyboard map configuration and change that if
    necessary.
    
     * "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
    
     * "%s": By default, DrakX deduces your time zone based on the country
    you have chosen. You can click on the "%s" button here if this is not
    correct.
    
     * "%s": check the current mouse configuration and click on the button to
    change it if necessary.
    
     * "%s": clicking on the "%s" button will open the printer
    configuration wizard. Consult the corresponding chapter of the ``Starter
    Guide'' for more information on how to setup a new printer. The interface
    presented there is similar to the one used during installation.
    
     * "%s": if a sound card is detected on your system, it is displayed
    here. If you notice the sound card displayed is not the one that is
    actually present on your system, you can click on the button and choose
    another driver.
    
     * "%s": by default, DrakX configures your graphical interface in
    "800x600" or "1024x768" resolution. If that does not suit you, click on
    "%s" to reconfigure your graphical interface.
    
     * "%s": if a TV card is detected on your system, it is displayed here.
    If you have a TV card and it is not detected, click on "%s" to try to
    configure it manually.
    
     * "%s": if an ISDN card is detected on your system, it will be displayed
    here. You can click on "%s" to change the parameters associated with the
    card.
    
     * "%s": If you want to configure your Internet or local network access
    now.
    
     * "%s": this entry allows you to redefine the security level as set in a
    previous step ().
    
     * "%s": if you plan to connect your machine to the Internet, it's a good
    idea to protect yourself from intrusions by setting up a firewall. Consult
    the corresponding section of the ``Starter Guide'' for details about
    firewall settings.
    
     * "%s": if you wish to change your bootloader configuration, click that
    button. This should be reserved to advanced users.
    
     * "%s": here you'll be able to fine control which services will be run
    on your machine. If you plan to use this machine as a server it's a good
    idea to review this setup.
sq: Si �faq�s, DrakX do t� prezentoj permbledhjen e infomacioneve t� ndryshme
    n� lidhje me sistemin tuaj. Duke u mvarur nga sistemi i juaj i instaluar
    q� ju mund t� posedoni disa apo t� gjitha hyrjet vijuese. Secila hyrje �sht�
    krijuar nga konfigurimi i artikullit q� duhej t� konfigurohet, duke e
    p�rcjellur me p�rmbledhje t� shpejt nga konfigurimi i tanish�m. Klikoni
    mbi kops�n e p�rcaktuar "%s" p�r ta ndryshaur at�.
    
     * "%s": verifikoni tastier�n e tanishme t� konfiguruar, dhe ndryshone
    at� n�se �sht� e nevojshme.
    
     * "%s": verifikoni shtetin tuaj t� p�rcaktuar. N�se ju nuk gjindeni
    n� shtetin e d�shiruar, klikoni mbi kops�n "%s" dhe zgjedheni nj�
    shtet tjet�r. N�se shteti i jauj nuk gjindet n� k�t� list�, klikoni mbi
    kops�n "%s" p�r ta pranuar nj� list� m� komplete.
    
    * "%s": Me marr�veshje, DrakX dedukton zon�n orare t� bazuar n�
    shtetin tuaj t� zgjedhur m� par�. Ju mund t� klikoni mbi kops�n "%s"n�se zona orare nuk �sht� e sakt�.
    
     * "%s": verifikone konfigurimin e minit tuaj dhe klikoni mbi kops�n
    n�se d�shironi ta ndryshoni at�.
    
     * "%s": duke klikuar mbi kops�n "%s" do t� hapni
    asistentin konfigurues p�r stampues. Konsultone kapitullin e p�rcaktuar
    t� ``P�rcjell�sit Nis�s'' p�r m� shum� informacione se si t� konfigurohet
    nj� stampues i ri. Interfaci i prezentuar �sht� i nj�jt� me at� q� �sht�
    paraqitur gjat� instalimit
    
     * "%s": n�se nj� kartel� z�ri �sht� zbuluar n� sistemin tuaj
    ajo do t� �faqet k�tu. N�se sh�nimet mbi kartel�n tuaj nuk p�rputhen me
    sh�nimet e kartel�s prezente n� sistem, ju keni mund�si t� klikoni mbi
    kops�n p�r t� zgjedhur nj� pilot tjet�r.
    
     * "%s": me marr�veshje, DrakX konfiguron interfacin tuaj grafik�,
    n� vendosm�ri "800x600" ose "1024x768". N�se kjo nuk �sht� prezentuar,
    kliko mbi kops�n "%s" p�r t� rifilluar nj� konfigurim t� ri.
    
     * "%s": n�se nj� kartel� TV zbulohet n� sistemin tuaj, ajo do
    t� �faqet k�tu. N�se ju posedoni nj� kartel� TV, dhe ajo nuk zbulohet
    automatikisht, klikoni mbi kops�n "%s" p�r ta konfiguruar
    manuelisht.
    
     * "%s": n�se nj� kartel� ISDN zbulohet n� sistemin tuaj, ajo
    do t� �faqet k�tu. Ju mund t� klikoni mbi kops�n "%s" p�r ti
    ndryshuar parametrat e bashkuar me kartel�n.
    
     * "%s": N�se d�shironi t� konfiguroni Internetin apo rrjetin
    tuaj lokal hyni tani.
    
     * "%s": kjo hyrje ju ofron p�rcaktimin e nivelit t� siguris�
    siq �sht� paraqitur n� etap�n e m� parme ().
    
     * "%s": n�se ju planifikoni t� kyqni makin�n tuaj n� Internet
    �sht� ide tejet e mir� t� mbroheni nga befasit� duke instalur murin e
    zjarrt. Konsultoni sektor�t e caktuar t� ``P�rcjell�sit Nis�s'' p�r
    m� shum� detaje mbi instalimet e murit t� zjarrt.
    
     * "%s": n�se d�shironi ti ndryshoni konfigurimet e bootloader
    klikoni mbi k�t� kops�. Kjo �sht� e rezervuar p�r p�rdorues t� p�rparuar.
    
     * "%s": ju do t� keni mund�sin� k�tu t� kontrolloni m� n� fund se
    cilat servise duhet t� nisen n� makin�n tuaj. N�se ju planifikoni t�
    p�rdorni k�t� makin� sikur nj� server, �sht� ide e mir� ta ri�faqni k�t�
    instalim.

en: Comoros
sq: Komoresi

en: May
sq: maj

en: Yaboot mode
sq: Mod� me nisje t� udh�zuar

en: USA (cable)
sq: SHBA (kablo)

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
sq: I pa mundur ringarkimi i Lilo!
    Ngarkoje "lilo" n� linj�n komanduese si p�rdorues administrator (root) p�r t� p�rfunduar instalimin e tem�s LILO.

en: Generic 3 Button Mouse
sq: Mini satandard me 3 Kopsa

en: Select another media to restore from
sq: Zgjedhe nj� p�rkrahje tjet�r riparuese

en: Software Manager
sq: Menagjer i Softverit

en: Re-submit
sq: Ri-vler�sim

en: CD in place - continue.
sq: CD-ja n� vend t� duhur - vazhdo.

en: Network & Internet
sq: Rrjeti & Internet

en: Lithuanian "phonetic" QWERTY
sq: Lituanis� "fonetik" Lituanis�

en: Net Boot Images
sq: Imazhe me nisje t� udh�zuar n� Rrjet

en: Sharing of local scanners
sq: Shp�ndarja e skanerve lokal�

en: Plug'n Play probing failed. Please select the correct monitor
sq: Testimi i Plug'n Play d�shtoi. Ju lutemi zgjedheni nj� monitor korrekt

en: Services and deamons
sq: Server�t dhe sh�rbimet

en: Remote host name missing!
sq: Emri i ftuesit n� distanc� mungon�!

en: with /usr
sq: me /usr

en: Network
sq: Rrjeti

en: Auto-detect printers connected to machines running Microsoft Windows
sq: Zbulo automatikisht stampuesit e lidhur n� k�t� makin�, duke u nisur n� Microsoft Windows

en: This password is too simple
sq: Kjo parull� �sht� shum� e thjesht�

en: Chkconfig obey msec rules
sq: Konfigurimi Chk i rregullave obey msec

en: Slovakian (QWERTZ)
sq: Slovakishte (QWERTZ)

en: To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments.
sq: P�r t� ndryshuar dhe krijuar gjuh� t� ndryshme sikur Perl, Python, c dhe C++ nuk ka q�n� kurr� m� leht� falas GNU gcc 3 dhe m� t� mirit mjedis zhvillues Open Source

en: No devices found
sq: Asnj� mjet i gjetur

en: Truly minimal install (especially no urpmi)
sq: Instalim tejet minimal (n� ve�anti pa urpmi)

en: Use daemon
sq: P�rdore daemon

en: Authentication
sq: V�rtet�simi

en: Add this printer to Star Office/OpenOffice.org/GIMP
sq: Shtoje k�t� stampues n� Star Office/OpenOffice.org/GIMP

en: Additional CUPS servers:
sq: Mbledh�s i serverve CUPS:

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
sq: Zgjedheni nj� stampues nga k�ta q� jan� zbuluar, apo futni nj� em�r t� makin�s, ose nj� adrese IP dhe numrin e port�s (me marr�veshje �sht� 9100) n� hyrje t� zon�s.

en: Where do you want to mount %s?
sq: Ku d�shironi ta montoni %s?

en: Algeria
sq: Algjeria

en: Restore Via Network
sq: Riparo Via Rrjet

en: Initrd-size
sq: Medh�sia e RamDiskut

en: In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
sq: N� disa raste, server t� ndrysh�m jan� t� disponibilitet p�r kartel�n tuaj
    grafike, me apo pa nisje 3D, juve do t� ju propozohet zgjedhja e nj� serveri
    m� t� p�rshtatsh�m p�r nevojat tuaja.

en: 	Backups use tar and gzip
sq: 	Regjistrimi do t� p�rdor� tar dhe gzip

en: Set as default
sq: Paraqite sikur me marr�veshje

en: Configured on this machine
sq: Konfigurohet n� k�t� makin�

en: Both Control keys simultaneously
sq: T� Dyja kopsat Kontrol nj�kohsh�m

en:  --help                - display this help
sq:  --help                - �faqe k�t� ndihmes�

en: [OPTION]...
      --no-confirmation      don't ask first confirmation question in MandrakeUpdate mode
      --no-verify-rpm        don't verify packages signatures
      --changelog-first      display changelog before filelist in the description window
      --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found
sq: [OPTION]...
      --no-confirmation      mos pyet p�r konfigurimin e par� azhrunues t� modit Mandrake
      --no-verify-rpm        mon i verifiko pakot e n�nshkruara
      --changelog-first      �faqi lidhjet e ndryshuara para list�s s� skadareve n� dritaren e p�rshkrimeve
      --merge-all-rpmnew     propozoje bashkimin e t� gjitha skedareve t� gjetura n� .rpmnew/.rpmsave

en: Setting Default Printer...
sq: Rregullimi me Marr�vshje p�r Stampim...

en: Interface %s (using module %s)
sq: Interfaci %s (duke p�rdorur modulin %s)

en: Generating preview ...
sq: Krijimi i �faqjes...

en: Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough '0' (zeroes).
sq: Frekuenca duhet t� ket� shtes�n k, M apo G (p�r shembull, "2.46G" p�r 2.46 GHz frekuenc�), apo shtoje plot�suesin '0' (zero).

en: ignore
sq: injoroje

en: Allow/Forbid X connections:
    
    - ALL (all connections are allowed),
    
    - LOCAL (only connection from local machine),
    
    - NONE (no connection).
sq: Mund�so/Ndalo lidhjen n� X:
    
    - GJITHA (t� gjitha lidhjet jan� t� mund�shme),
    
    - LOKAL (vet�m lidhje lokale),
    
    - ASNJ�RA (asnj� lidhje).

en: , multi-function device on parallel port #%s
sq: , periferik multi-funksionel n� port�n paralele #%s

en: serial
sq: serik

en: Georgian ("Latin" layout)
sq: Gjeorgjishte (disponibilitet "Latine")

en: Get the best items with Mandrake Linux Strategic partners
sq: Pranoni artikuj m� t� mir� me part�ner Strategjik� t� Mandrake Linux

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
sq: Ju mund ti furnizoni opcionet n� modulin %s.
    Sh�noni q� t� gjitha adresat duhet t� jen� n� hyrje t� parashtes�s 0x sikur '0x123'

en: Kenya
sq: Kenia

en: Use ``Unmount'' first
sq: P�rdor m� par� ``Demontimin''

en: Installing mtools packages...
sq: Intalimi i pakove mtools...

en: You must specify a root partition
sq: Ju duhet t� specifikoni nj� ndarje rr�nj�zore

en: first step creation
sq: krijimi i etap�s s� par�

en: Both Shift keys simultaneously
sq: T� Dyja Kopsat Shift nj�kohsh�m

en:  --id <id_label>       - load the html help page which refers to id_label
sq:  --id <id_label>       - ngarkoje faqen ndihmuese html e cila referohet n� id_etiket�

en:         - Create etherboot floppies/CDs:
            		The diskless client machines need either ROM images on the NIC, or a boot floppy
            		or CD to initate the boot sequence.  drakTermServ will help generate these images,
            		based on the NIC in the client machine.
            		
            		A basic example of creating a boot floppy for a 3Com 3c509 manually:
            		
            		cat /usr/lib/etherboot/boot1a.bin \
            			/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0
sq:         - Krijo nisje t� udh�zuar t� ether (ethetboot) flopi/CDs:
            		P�r klientat me disqe t� vogla, n� makina nevojiten imazhet e tyre ROM, n� NIC apo nj� flopi disk me nisje t� udh�zuar
            		apo CD p�r t� inicializuar sekuencat me nisje t� udh�zuar. drakTermServ do ndihmoj� n� prodhimin e k�tyre imazheve,
            		t� bazuar n� NIC n� makina kliente.
            		
            		Nj� shembull bazues p�r krijimin e nj� diskete floppy me nisje t� udh�zuar p�r nj� 3Com 3c509 manuale:
            		
            		cat /usr/lib/etherboot/boot1a.bin \
            			/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0

en: Select a scanner model
sq: Zgjedhe nj� model t� skanerit

en: Accept/Refuse bogus IPv4 error messages.
sq: Prano/Refuzo lajmet e gabueshme t� rrejshme IPv4.

en: LPRng - LPR New Generation
sq: LPRng - LPR i Gjenerat�s s� Re

en: Drakbackup Configuration
sq: Konfigurimi i regjistrimit Drakbackup

en: Save as..
sq: Shp�toje si..

en: Korea (North)
sq: Korea (Veriut)

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
sq: Ky interfac nuk �sht� i konfiguruar ende.
    Nise asistentin konfigurues n� dritaren kryesore

en: System configuration
sq: Konfigurimi i sistemit

en: Autologin
sq: Lidhje automatike

en: Domain Admin Password
sq: Parulla e Administruesit t� Pron�s

en: Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ...
sq: E adapton me precizitet kompjuterin tuaj p�r nevojat tuaja Mandrake Linux 9.2 ju ofron 11 mjedise punuese, t� cilat ju keni mud�si ti ndryshoni: KDE 3.1, GNOME 2.2, Window Maker, ...

en: Configuring printer ...
sq: Konfigurimi i stampuesit ...

en: To ensure data integrity after resizing the partition(s), 
    filesystem checks will be run on your next boot into Windows(TM)
sq: P�r t� siguruar intergrimin e t� dh�nave mbas� ndrajes(ve), sistemi
    verifikues i skedareve do t� niset n� nisjen tjet�r boot mbi Windows(TM)

en: if set to yes, run some checks against the rpm database.
sq: n�se konfigurohet me po, nisi disa verifikime kund�r baz�s s� t� dh�nave rpm.

en: Virgin Islands (British)
sq: Ishujt Virgj�r (Britanike)

en: Bermuda
sq: Bermude

en: click here if you are sure.
sq: klikoni k�tu n�se ju jeni i sigurt

en: No configuration file found 
    please click Wizard or Advanced.
sq: Asnj� konfigurim i gjetur p�r skedare 
    ju lutemi klikoni mbi Asistentin ose Vazhdo Para

en: Listed here are the existing Linux partitions detected on your hard drive.
    You can keep the choices made by the wizard, since they are good for most
    common installations. If you make any changes, you must at least define a
    root partition ("/"). Do not choose too small a partition or you will not
    be able to install enough software. If you want to store your data on a
    separate partition, you will also need to create a "/home" partition
    (only possible if you have more than one Linux partition available).
    
    Each partition is listed as follows: "Name", "Capacity".
    
    "Name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard drive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". For IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
sq: Lista e lart� sh�nuar identifikon ndrajet Linux t� zbuluara n�
    sistemin tuaj. Ju mund ti pranoni zgjedhjet e propzuara nga asistenti
    i cili �sht� i mir� se ardhur n� shumic�n e rasteve gjat� instalim.
    N�se ju e b�ni ndonji ndryshim, ju duhet t� posedoni m� s� paku nj� ndarje
    root ("/"). Mos zgjidhni ndarje shum� t� vogla sepse nuk do t� keni
    mund�si t� instaloni programe t� mjaftueshme. N�se d�shironi ti mbani
    t� dh�nat tuaja n� nj� ndarje tjet�r nga ndarje primare root, at�her�
    ju duhet t� krijoni nj� ndarje "/home" (ky manupulim �sht� i mundsh�m
    n�se posedoni m� s� paku nj� ndarje Linux p�r ta konfiguruar).
    
    Secila ndarje �sht� e listuar n� k� m�nyr�: "Emri", "Kapaciteti".
    
    "Emri" �sht� i strukturuar simbas: "tipi i diskut t� fort", "numri i diskut t� fort", "numri i ndrajes" (p�r shembull, "hda1").
    
    "Tipi i diskut t� fort" n�se �sht� disk i fort "hd" �sht� disk i fort
    IDE dhe n�se �sht� disk i fort "sd" �sht� disk i fort SCSI.
    
    "Numri diskut t� fort" �sht� gjithnji i sh�nuar mbas� "hd" ose "sd".
    P�r disqet e forta IDE:
    
     * "a" do t� thot� "disku i fort master n� kontrolluesin primar IDE";
    
     * "b" do t� thot� "disku i fort sklav� n� kontrolluesin primar IDE";
    
     * "c" do t� thot� "disku i fort master n� kontrolluesin sekondar IDE";
    
     * "d" do t� thot� "disku i fort esklav� n� kontrolluesin sekondar IDE".
    
    P�r disqet SCSI, "a" do t� thot� "m� i vogli SCSI ID", dhe "b" do t� thot� "i dyti dhe m� i vogli me radh� SCSI ID", etj.

en: Remove
sq: Zhduke

en: Lesotho
sq: Lesoto

en: utopia 25
sq: utopi 25

en: Pipe job into a command
sq: Stampim n� nj� urdh�r shell

en: Cote d'Ivoire
sq: Bregu Ivoare

en: new dynamic device name generated by core kernel devfs
sq: em�r i ri i mjetit dinamik i prodhuar nga b�rthama devfs

en: Yes
sq: Po

en: Which protocol do you want to use?
sq: Cilin protokol d�shironi ta p�rdorni?

en: Restore Progress
sq: Riparimi n� vazhdim e sip�r

en: Choose the host on which the local scanners should be made available:
sq: Zgjedhe ftuesin n� t� cilin skaner�t lokal duhet t� aktivizohen:

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
sq: Ju posedoni nj� vend� t� zbaz�t n� ndarjen e tabel�s, t� cil�n nuk mund ta
    p�rdori. E vetmja mund�si �sht� q� ta z�vendosni ndarjen primare, n� nj� m�nyr� q�, ajo zbrazt�si t� jet� e vendosur kund�r ndarjeve t� zgjatura.

en: Channel
sq: Kanal

en: Add
sq: Shto

en: No Internet Connection Sharing has ever been configured.
sq: Asnj� Shp�rndarje e Lidhjes Intenetit s'�sht� konfiguraur.

en:  Error while sending mail.
sq:  Gabim gjat� d�rgimit t� lajmit.

en: Keyboard
sq: Tastiera

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
sq: Futni CD-n� %s n� lexues e cila i p�rshtatet
     pik�s montuese /mn/cdrom

en: Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough '0' (zeroes).
sq: Rrahja duhet t� ket� shtes�n k, M apo G (p�r shembull, "11M" p�r 11M), apo shtoje plot�suesin '0' (zero).

en: Choose the connection you want to configure
sq: Zgjedheni lidhjen q� d�shironi ta konfiguroni

en: Please wait, setting security level...
sq: Nj� moment ju lutemi, konfigurim i nivelit t� siguris�...

en: Configuring network device %s
sq: Konfigurimi i periferikut t� rrjetit %s

en: activated
sq: aktivizuar

en: Please choose which network interface will be used for the dhcp server.
sq: Ju lutemi zgjedheni interfacin e rrjetit i cili do t� p�rdoret p�r serverin dhcp.

en: Finding packages to upgrade...
sq: Gjetja pakove azhurnuese...

en: Mount point:
sq: Pik� montuese:

en: parse all fonts
sq: analizoi t� gjitha polisat

en: Allow/Forbid direct root login.
sq: Mund�so/Ndalo lidhje direkte root.

en:  Accept/Refuse broadcasted icmp echo.
sq:  Prano/Refuzo transmetuesi echon icmp.

en: With X
sq: Me X

en: Multi-head configuration
sq: Konfigurimi i multi-ekraneve

en: No browser available! Please install one
sq: Asnj� shfletues i lir�! Ju lutemi instalone nj�rin

en: Keep the changes?
    The current configuration is:
    
    %s
sq: A d�shironi ti konservoni ndryshimet?
    Konfigurimi i tanish�m �sht�:
    
    %s

en: You can't use ReiserFS for partitions smaller than 32MB
sq: Ju nuk mund t� p�rdorni ReiserFS p�r ndarjet m� t� vogla se 32MB

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
sq: Protokoli rwho mund�son q� p�rdoruesit n� distanc� t� furnizohen me list�n
    e p�rdoruesve t� kyqur n� nj� makin� e cila v� n� pun� deamon rwho (nj�jt� sikur finger).

en: Domain name
sq: Emri i pron�s

en: Sharing of local printers
sq: Shp�ndarja e stampuesve lokal

en: Enable/Disable libsafe if libsafe is found on the system.
sq: Aktivizoje/Blokoje libsafe �sht� shp�tues p�r librarin� q� gjindet n� sistem.

en: Available printers
sq: Stampuesit e lir�

en: Empty
sq: Zbraz�t

en: text width
sq: gjat�sia e tekstit

en: Where do you want to mount device %s?
sq: Ku d�shironi ta montoni ndarjen %s?

en: The default lease (in seconds)
sq: Qiraja me marr�vshje (n� sekonda)

en: We are now going to configure the %s connection.
    
    
    Press "%s" to continue.
sq: Tani do ta konfigurojm� lidhjen %s.
    
    
    Shtypni mbi "%s" p�r vazhduar.

en:         - Create Etherboot Enabled Boot Images:
            		To boot a kernel via etherboot, a special kernel/initrd image must be created.
            		mkinitrd-net does much of this work and drakTermServ is just a graphical interface
            		to help manage/customize these images. To create the file 
            		/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in 
            		dhcpd.conf, you should create the etherboot images for at least one full kernel.
sq:         - Krijo nisje me Etherboot, Imazhe i Lir� me Nisje Boot:
            		P�r t� nisur nj� b�rtham� via nisje me udh�zim n� Ether,
            		nj� imazhe speciale duhet t� krijohet n� b�rtham�/initrd.
            		mkinitrd-net nuk �sht� nj� punim me r�nd�si drakTermServ por �sht� vet�m nj� interfac grafik�
            		p�r t� ndihmuar n� qeverisjen/personalizimin e k�tyre imazheve.
            		P�r t� krijuar skedare /etc/dkcpd.conf.etherboot-pcimap.inlude
             		ato do t� t�rhiqen sikur p�rfshirje t� dhcpd.conf, dhe ju duhet
             		t� krijoni nj� imazh m� s� paku t� etherboot n� b�rtham�.

en: Interface "%s"
sq: Interfac "%s"

en: With basic documentation (recommended!)
sq: Me dokumentacion bazues (rekomanduar!)

en: 1 button
sq: 1 kops�

en: 
    There are %d unknown printers directly connected to your system
sq: 
    N� sistemin tuaj jan� t� lidhur direkt, %d stampues t� pa njoftur

en: Your choice? (default `%s'%s)
sq: Zgjedhja juaj? (`%s' me marr�veshje t� %s)

en: Raw printer
sq: Stampues me hyrje direkte

en: official vendor name of the cpu
sq: emri i shit�sit kryesor t� k�tij cpu

en: Useless without Terminal Server
sq: Nuk p�rdoret pa Terminal Server

en: Vendor
sq: Shit�s

en: Interface %s
sq: Interfaci %s

en: Configure mouse
sq: Konfigurimi i minit

en: Choose the mount points
sq: Zgjedhni pikat montuese

en: Yugoslavian (latin)
sq: Jugoslave (latine)

en: Installing
sq: Instalimi

en: Logitech MouseMan with Wheel emulation
sq: Logitech MouseMan me Rrot� imituese

en: Launch userdrake
sq: Nise userdrake

en: Is this an install or an upgrade?
sq: �sht� ky nj� instalim apo nj� azhurnim?

en: ISDN card
sq: Kartel� ISDN

en: To share your own knowledge and help build Linux software, join our discussion forums on our "Community" webpages.
sq: P�r t� shp�rndare diturit� tuaja dhe p�r t� ndihmuar krijimin e veglave t� Linux-it, bashkangjituni n� bisedime, t� cilat gjinden n� faqen web "Community"

en: 	-Hard drive.
sq: 	-Disku i Fort�.

en: This step is activated only if an old GNU/Linux partition has been found on
    your machine.
    
    DrakX now needs to know if you want to perform a new install or an upgrade
    of an existing Mandrake Linux system:
    
     * "%s": For the most part, this completely wipes out the old system. If
    you wish to change how your hard drives are partitioned, or change the file
    system, you should use this option. However, depending on your partitioning
    scheme, you can prevent some of your existing data from being over-written.
    
     * "%s": this installation class allows you to update the packages
    currently installed on your Mandrake Linux system. Your current
    partitioning scheme and user data is not altered. Most of other
    configuration steps remain available, similar to a standard installation.
    
    Using the ``Upgrade'' option should work fine on Mandrake Linux systems
    running version "8.1" or later. Performing an Upgrade on versions prior
    to Mandrake Linux version "8.1" is not recommended.
sq: Kjo etap� aktivizohet automatikisht n�se ju posedoni nj� ndarje t� vjet�r
    GNU/Linux, n� makin�n tuaj.
    
    DrakX tani ka nevoj� t� dij� n�se ju d�shironi t� �faqni nj� instalim,
    apo azhurnim t� ri, n� sistemin ekzistues Mandrake Linux:
    
     * "%s": P�r shumic�n e rasteve, ky kompletisht shlyhet nga sistemet
    e vjetra. N�se ju d�shironi ta nd�rroni shp�rndarjen e diskut tuaj t� fort�,
    apo t� ndryshoni sistemin e skedareve tuaja, ju duhet ta p�rdorni k�t� opcion.
    Pa marr� para sysh, nga mvar�sit� e skem�s s� ndarjes�, ju mund ti parandaloni
    disa t� dh�na ekzistuese nga t� mbi-z�vend�suarat.
    
     * "%s": kjo klas� instaluese ju mund�son azhurnimin e pakove aktuale
    t� instaluara, n� sistemin tuaj Linux Mandrake. Skema e ndarjes,
    dhe e t� dh�nave t� p�rdoruesve, nuk do t� ndryshohet. Shumica
    e etapave t� tjera konfiguruese mund�sojn� nj� vazhdim, t� nj�jt� sikur
    tek instalimet standarde.
    
    Duke p�rdorur mund�sin� ``Azhurno'' duhet t� funksionoj shum� mir� n� sistemin
    Mandrake Linux nd�r versionin "8.1" apo m� t� ri. Tentimi i Azhurnimit t�
    nj� versioni m� t� vjet�r se versioni Mandrake Linux "8.1" nuk rekomandohet.

en: Printer on remote CUPS server
sq: Stampues n� server t� larg�t CUPS

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
sq: D�shtim gjat� t�rheqjes s� stampuesit "%s" nga Star Office/OpenOffice.org/GIMP.

en: here if no.
sq: K�tu n�se jo.

en: DHCP host name
sq: Emri i ftuesit DHCP

en: The maximum lease (in seconds)
sq: Qiraja maksimale (n� sekonda)

en: Please choose which serial port your mouse is connected to.
sq: Ju lutemi zgjedheni port�n serike, n� t� cil�n �sht� kyqur mini i juaj.

en: Did it work properly?
sq: A jeni i k�naqur me stampimin e b�r�?

en: Mount the file system read-only.
sq: Montoje sistemin e skedares vet�m n� lexim.

en: Poor
sq: Varf�r

en: Report check result by mail
sq: Verifikoje rezultatin e raportit nga e-maili

en: The DHCP start range
sq: Kufiri i nisjes n� DHCP

en: Unsafe
sq: Jo i sigurt

en: , %s sectors
sq: , %s sektor�t

en: No
sq: Jo

en: Guadeloupe
sq: Godeloup

en: Kannada
sq: Kanada

en: could not find any font.
sq: nuk mund ta gjej� asnj� polis�.

en: Do you want the BackSpace to return Delete in console?
sq: A d�shironi q� kopsa BackSpace ta kthej� Zhdukjen n� konsol�?

en: Vertical refresh rate
sq: Frekuenc� vertikale freskuese

en: Entering step `%s'
sq: Nisja e etap�s `%s'

en: Niger
sq: Nigeria

en: Removing %s ...
sq: Zhdukja e %s ...

en: No printer
sq: Asnj� stampues

en: alert configuration
sq: konfigurimi i alert�s

en: NetWare Printer Options
sq: Opcionet e Stampuesit NetWare

en: %s BootSplash (%s) preview
sq: �faqja e ekranit n� nisje %s (%s)

en: February
sq: shkurt

en: General
sq: P�rgjithsi

en: /etc/issue* exist
sq: /etc/issue* ekziston

en: Add a user
sq: Shtoje nj� p�rdorues

en: Network configuration (%d adapters)
sq: Konfigurimi i Rrjetit (%d kartel� rrjeti)

en: April
sq: Prill

en: Deactivate now
sq: Dezaktivizoje tani

en: Mandatory package %s is missing
sq: Pakoja e nevojshme %s mungon

en: Philippines
sq: Filipinet

en: drakTermServ Overview
sq: Ri�faqe drakTermServ

en: Print Queue Name
sq: Stampoe Emrin e Rreshtit

en: Do you want to use aboot?
sq: A d�shironi ta p�rdorni aboot?

en: Belarusian
sq: Beloruse

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
sq: PDQ p�rkrah� vet�m stampues lokal, stampues LPD t� larg�t, dhe stampues t� rrjetit autonom.

en: Move files to the new partition
sq: Vendosi skedaret n� nj� ndarje t� re

en: Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network.
sq: K�tu keni mund�sin� t� shtoni server CUPS dhe stampues q� d�shironi ti p�rdorni. E t�ra q� duhet t� b�ni �sht� kjo, n�se serveri nuk i transmeton infomacionet e stampuesit n� rrjet.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
sq: 
    Mir�sevini n� Asistentin p�r Konfigurimin e Stampuesit
    
    Ky asistent do t� ju ndihmoj� q� ta instaloni stampuesin(t) tuaj t� lidhur n� k�t� kompjuter.
    
    N�se e keni lidhur stampues n� k�t� kompjuter, ju lutemi lidhni ata n� k�t� kompjuter ndizni ata, q� m� n� fund ata t� zbulohet(n) automatikisht.
    
    Klikoni mbi "Tjetri" kur ju jeni gati, dhe mbi "Anulo" n�se ju, nuk d�shironi ta konfiguroni stampuesin(t).

en: Pitcairn
sq: Pitkairn

en: Restore From Catalog
sq: Riparoje Nga Katalogu

en: mounting partition %s in directory %s failed
sq: montimi i ndarjes %s n� repertorin %s d�shtoi

en: Lilo screen
sq: Ekrani Lilo

en: LILO with graphical menu
sq: LILO n� mod� grafik

en: Estimating
sq: Vler�simi n� sip�r

en: You can't unselect this package. It is already installed
sq: Ju nuk mund ta �zgjedhni k�t� pako. �sht� e instaluar m� par�

en: , printer "%s" on SMB/Windows server "%s"
sq: , stampues "%s" mbi server SMB/Windows "%s"

en: Go on anyway?
sq: Vazhdo pa marr� parasysh?

en: Looking for available packages and rebuilding rpm database...
sq: K�rkim i pakove t� lira, dhe rind�rtimi i baz�s s� t� dh�nave rpm...

en: 
                          DrakBackup Report
sq: 
                          Raporti DrakBackup

en: Does not appear to be recordable media!
sq: Kjo me sa duket nuk mund t� jet� me nj� p�rkrahje regjistruese!

en: Specify options
sq: Specifikoi opcionet

en: New user list:
sq: Lista e p�rdoruesit t� ri:

en: Either the server name or the server's IP must be given!
sq: Ju duhet m� s� paku t� precizoni emrin e serverit apo adres�n IP!

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
sq: Nj� diskt� boot mund�son nisjen e sistemit tuaj Linux pa kurr�far� 
    mvar�sie nga nj� ngarkues normal boot. Kjo �sht� tejet e p�rdorshme n�se ju nuk d�shironi t� instaloni
    SILO n� system tuaj, apo n� nj� sistem tjet�r operues, q� do t� zhduk SILO, ose SILO nuk do t�
    funksionoj n� konfigurimin e mjetit tuaj. Nj� disket� boot mund t� p�rdoret me nj�
    imazh Mandrake, e cili mbulohet m� leht� nga disa sisteme tjera
    me gabime.
    
    N�se d�shironi t� krijoni nj� disket� boot p�r systemin tuaj, futni n� lexuesin e par�
    floppy dhe shtypni mbi "Ok".

en: You can't use an encrypted file system for mount point %s
sq: Ju nuk mund ta p�rdorni sistemin e skedareve t� kriptuara p�r k�t� pik� montuese %s

en: Set the password history length to prevent password reuse.
sq: Konfiguroje gjat�sin� e skedares s� historis� n� rip�rdorimin e parull�s s� ndaluar.

en: Norfolk Island
sq: Ishulli Norfolk

en: Theme installation failed!
sq: Instalimi i tem�s d�shtoi!

en: Nothing to do
sq: Mos b�j� asgj�

en: Use for loopback
sq: P�rdore p�r loopback

en: Mandrake Bug Report Tool
sq: Veg�l Sinjalizuese bug n� Mandrake

en: Apply filter
sq: Aplikoje filterin

en: use pppoe
sq: p�rdore pppoe

en: Moving files to the new partition
sq: Zhvendosja e skedareve n� nj� ndarje t� re

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
sq: XFree %s me p�rkrahje t� materialit EKSPERIMENTUES n� nxitimin 3D

en: Advanced
sq: Vazhduar

en: Transfer
sq: Transfero

en: Dvorak (Swedish)
sq: Dvorak (Suedishte)

en: Afghanistan
sq: Afganistani

en: More Options
sq: M� shum� Opcione

en: Delete Hard Drive tar files after backup to other media.
sq: Zhduki t� gjitha skedaret tar, mbas� gjdo regjistrimi ne nj� p�rkrahje tjet�r.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
sq: cron �sht� nj� planifikues standard UNIX i cili nis programet e sepcifikuara
    n� nj� koh� periodike t� p�rcaktuar. vixie cron shton nj� num�r t� caktuar funksionesh, n� baz�n
    UNIX, duke p�rfshir� nj� siguri m� t� p�rsosur me mund�si konfigurimi.

en: Add Client -->
sq: Shtoje nj� Klient -->

en: Read carefully!
sq: Gjendje gadishm�rie!

en: Please,
    type in your tv norm and country
sq: Ju lutemi
    shtypni n� zgjedhjen e regjionit tuaj me norm� TV

en: Port
sq: Porta

en: No (experts only)
sq: Jo (vet�m expertat)

en: No kernel selected!
sq: Asnj� B�rtham� e zgjedhur�!

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Press enter to boot the selected OS, 'e' to edit the
sq: Shtypni mbi hyrje p�r nj� nisje boot, mbi 'e' p�r ta �faqur

en: The encryption keys do not match
sq: �el�sat kriptues nuk p�rputhen

en: For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup.
sq: P�r nj� multisesion t� CD, vet�m sesioni i par� do ta shlyej cdrw. P�rndryshecdrw �sht� i shlyer para secilit backup.

en: USB printer
sq: Stampuesi USB

en: Right "Windows" key
sq: �el�si "Windows" djathtas

en: if set to yes, check empty password in /etc/shadow.
sq: n�se konfigurohet me po, verifikoje parull�n e zbrazt� n� /etc/shadow.

en: Before continuing, you should carefully read the terms of the license. It
    covers the entire Mandrake Linux distribution. If you do agree with all the
    terms in it, check the "%s" box. If not, simply turn off your computer.
sq: Para se t� vazhdoni m� tutje, ju duhet ti lexoni termet dhe kushtet p�r
    p�rdorimin e licenc�s. Kjo mbulon t�r� shp�rndarjen e Mandrake Linux,
    n�se ju pajtoheni me k�to kushte, klikoni mbi mbi kops�n "%s".
    N�se ju nuk pajtoheni at�her thjesht� ndaleni komjuterin tuaj.

en: Here is a list of the available printing options for the current printer:
sq: Ja pra lista e mund�sive n� disponibilitet e stampimit, p�r stampuesin e tanish�m:

en: Resolutions
sq: Vendosm�rit

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
sq: Konfigurues i drakfirewall
    
    Ky do konfiguroj murin-e-zjarrt� (firewall) personel p�r makin�n Mandrake Linux.
    N�se ju d�shironi nj� mur-t�-zjarrt� (firewall) m� t� fuqish�m, kthehuni n�
    shp�rndarjen e specializuar MandrakeSecurity.

en: Please enter your username, password and domain name to access this host.
sq: Ju lutemi futni emrin e p�rdoruesit, parull�n dhe emrin e pron�s p�r t� hyr� n� k�t� server.

en: Remove selected host
sq: Zhduke ftuesin e zgjedhur

en: Network configuration
sq: Konfigurimi i Rrjetit (Network)

en: No sharing
sq: Asnj� ndarje

en: Move selected rule down one level
sq: Zbrite rregull�n p�r nj� nivel m� t� ult�

en: FATAL
sq: FATAL�

en: Refresh the list
sq: Rifreskoje list�n

en: The DHCP server will allow other computer to boot using PXE in the given range of address.
    
    The network address is %s using a netmask of %s.
sq: Serveri DHCP do t� lejoj q� kompjuter�t tjer� t� nisen duke p�rdorur PXE n� adresat e rradhitura.
    
    Adrea e rrjetit �sht� %s duke p�dorur net-mask�n e %s.

en: Delete
sq: Zhduke

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
sq: A d�shironi q� intefac grafik (XFree) t� niset automatikisht
    gjat� nisjes s� kompjuterit?

en: Build the disk
sq: Nd�rtoje nj� disket�

en: Disconnect %s
sq: Shk�putja e %s

en: Status:
sq: Statuti:

en: SSH Server
sq: Server SSH

en: 	-Network by rsync.
sq: 	-Rrjeti nga rsync.

en: European protocol
sq: Protokol evrope

en: , printer "%s" on server "%s"
sq: , stampues "%s" mbi server "%s"

en: Note that currently all 'net' media also use the hard drive.
sq: Sh�noni se t� gjitha burimet 'net' do ta p�rdorin diskun e fort.

en: Error
sq: Gabim

en: allow "su"
sq: autorizim "su"

en: please wait during ttmkfdir...
sq: nj� moment ju lutemi gjat� ttmkfdir...

en: Configure only card "%s"%s
sq: Konfiguroje vet�m kartel�n "%s"%s

en: Level
sq: Niveli

en: Change the printing system
sq: Nd�rroje sistemin e stampimit

en: Your system supports multiple head configuration.
    What do you want to do?
sq: Sistemi juaj mund t� p�rdore konfigurimin multi head.
    �ka d�shironi t� beni?

en: Configure services
sq: Konfiguroi serviset

en: Broadcast Address:
sq: Adresa Transmetuese:

en: mount failed:
sq: d�shtim gjat� montimit:

en: the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to "benchmark" the cpu.
sq: b�rthama GNU/Linux duhet t� nis� nj� llogaritje t� lakuar n� koh�n e nisjes q� ta inicializoj� koh�n e llogaritur. �sht� rezultat i stokuar sikur bogomips dhe si nj� rrugic� e "benchmark" n� cpu.

en: Image
sq: Imazh

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
sq: Shtimi i nj� stampuesi d�shtoi "%s" n� Star Office/OpenOffice.org/GIMP.

en: Remote Administration
sq: Administrim n� Larg�si

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
sq: P�rmbajtja e PCMCIA s'�sht� m� n� disponibilitet me b�rthame�n 2.2. Ju lutemi p�rdoreni b�rthamen 2.4.

en: Selected All
sq: Zgjedhi Gjith�

en: CUPS - Common Unix Printing System
sq: CUPS - Sistem Unix Stampues

en: Webmin Service
sq: Servisi Webmin

en: device
sq: periferik

en: Enter the directory to save to:
sq: Caktoni repertorin n� t� cilin d�shironi t� regjistroni:

en: Greece
sq: Greqia

en: All
sq: Gjitha

en: Which printing system (spooler) do you want to use?
sq: �far� sistemi stampues (spooler) d�shironi t� p�rdorni?

en: July
sq: korrik

en: Prints into %s
sq: Stampoje n� %s

en: An error occurred
sq: Nj� gabim �sht� paraqitur

en: This package must be upgraded.
    Are you sure you want to deselect it?
sq: Kjo pako duhet t� azhurnohet.
    A jeni i sigurt p�r �zgjedhjen e saj?

en: Tamil (Typewriter-layout)
sq: Tamile (makin� shtyp�se)

en: Use password to authenticate users.
sq: P�rdore parull�n p�r ti v�rtetuar p�rdoruesit.

en: Allow/Forbid the list of users on the system on display managers (kdm and gdm).
sq: Mund�so/Ndalo �faqjen e list�n s� p�rdoruesve n� sistem n� administruesin (kdm dhe gdm).

en: manual
sq: manuel�

en: Filename text to search for:
sq: Emri i skedares tekst p�r hulumtimin e:

en: Printer manufacturer, model, driver
sq: Prodhuesi i stampuesit, modeli, piloti

en: There is no medium or it is write-protected for device %s.
    Please insert one.
sq: Asnj� burim prezent apo �sht� i mbrojtur n� shkrim p�r mjetin %s.
    Ju lutemi futeni nj�rin.

en: Directory %s already contains data
    (%s)
sq: Repertori %s p�rmban veqse t� dh�na
    (%s)

en: Printer on NetWare server
sq: Stampuesi n� server NetWare

en: Give the ram size in MB
sq: Paraqite madh�sin� e memoris� n� MB

en: Friday
sq: e premte

en: Disconnection from Internet complete.
sq: Kompletim i shk�putjes nga Interneti.

en: Real name
sq: Emri dhe mbiemri

en: done
sq: e b�r�

en: Please uncheck or remove it on next time.
sq: Ju lutemi �n�nvizoni apo zhdukni ato n� her�n tjet�r.

en: Higher
sq: M� i lart�

en: Choose the partitions you want to format
sq: Zgjedhni ndarjet q� d�shironi ti formatoni

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
sq: Asnj� Kartel� e TV s'�sht� zbuluar n� makin�n tuaj. Ju lutemi verifikoni n�se nj� kartel� Video/TV p�rkrahet nga Linux, dhe �sht� e lidhur� n� m�nyr� korrekte.
    
    
    Ju mund ta vizitoni mjetin tuaj t� baz�n s� t� dh�nave n�:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: Can't find %s on %s
sq: Nuk mund ta gjej� %s n� %s

en: Japanese 106 keys
sq: Japonisht� me 106 kopsa

en: This will take a few minutes.
sq: K�saj i nevojitet pak� koh�

en: June
sq: qershor

en: Use scanners on remote computers
sq: P�rdori skaner�t n� kompjuter�t e larg�t

en: Delete selected rule
sq: Zhduki rregullat e zgjedhura

en: Accessing printers on remote CUPS servers
sq: Pranimi i stampuesve n� server t� larg�t CUPS

en: Insert a floppy in %s
sq: Futni nj� disket� n� %s

en: Maldives
sq: Maldivia

en: compact
sq: kompakt

en: 1 minute
sq: 1 minut�

en: type: fat
sq: tipi: trash

en: on channel %d id %d
sq: n� kanal %d id %d

en: , multi-function device
sq: , periferik multi-funksion

en: Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!
sq: Mandrake Linux 9.2 dhe Qendra Kontrolluese Mandrake ju siguron nj� veg�l t� plot� fuqishme t� adaptuar p�r komjuterin tuaj, p�r p�rdorimin dhe krijimin e tij. Konfiguroni dhe p�rcaktoni elementet sikur n� nivelin e siguris�, periferik�t (monitori, mini, tastiera...), lidhja n� internet e shum� e shum� t� tjera!

en: Activate/Disable ethernet cards promiscuity check.
sq: Activizoje/Blokoje kartel�n ethernet me verifikim t� p�rzier.

en: There is no FAT partition to resize (or not enough space left)
sq: Asnj� ndarje FAT p�r ta ridimenziunuar (ose nuk ka hap�sir� t� mjaftueshme)

en: Up
sq: Lart�

en: Firewall
sq: Mur i Zjarrt

en: Area:
sq: Zona:

en: (E)IDE/ATA controllers
sq: Kontrolluesit (E)IDE/ATA

en: All I/O to the file system should be done synchronously.
sq: Gjitha I/O n� sistemin e skedares duhet t� sinkronizohen.

en: Printer Server
sq: Server Stampues

en: Custom configuration
sq: Konfigurimi i dogan�s

en: Please indicate where the installation image will be available.
    
    If you do not have an existing directory, please copy the CD or DVD contents.
sq: Ju lutemi p�rcaktone vendin n� t� cilin do t� instalohet imazhi.
    
    N�se ju nuk posedoni nj� repertor ekzistues, kopjoni p�rmbajtjet e CD apo DVD.

en: Saint Pierre and Miquelon
sq: Pierre dhe Miqueloni i Shenj�t

en: September
sq: shtator

en: saving Bootsplash theme...
sq: regjistrimi i tem�s me nisje t� udh�zuar...

en: Portugal
sq: Portugale

en: Do you have another one?
sq: A posedoni ndonj� tjet�r?

en: , printing to %s
sq: , stampim n� %s

en: Assign host name from DHCP address
sq: Ju lutemi futne emrin nga adresa DHCP.

en: Toggle to normal mode
sq: Kalo n� mod� normal

en: Generic
sq: P�rgjithsh�m

en: Cylinder %d to %d
sq: Cilindri %d n� %d

en: New profile...
sq: Profil i Ri...

en: NONE
sq: ASNJ�

en: Which disk do you want to move it to?
sq: Mbi cilin disk d�shironi t� vendoseni?

en: Display logo on Console
sq: �faqe logon nd�r Konsol�

en: Windows Domain
sq: Prona Windows

en: Saami (norwegian)
sq: Saami (norvegjishte)

en: Interface %s (on network %s)
sq: Interfaci %s (n� rrjet %s)

en: Wallis and Futuna
sq: Ishujt Wallis dhe Futuna

en: Need to create /etc/dhcpd.conf first!
sq: Duhet t� krijohet m� s� pari /etc/dhcpd.conf!

en: Is FPU present
sq: A �sht� prezent FPU

en: There are no scanners found which are available on your system.
sq: Asnj� nga skaner�t e gjetur, nuk jan� t� lir� n� sistemin tuaj.

en: No additional information
    about this service, sorry.
sq: Asnj� informacion mbi
    k�t� servis, kemi ndjes�.

en: Build Single NIC -->
sq: Nd�rto nj� NIC Vetiak -->

en: Marshall Islands
sq: Ishujt Marshall

en: Is this correct?
sq: �sht� kjo korrekt?

en: Root password
sq: Parulla e administratorit (root)

en: Build All Kernels -->
sq: Nd�rtoi t� gjitha B�rthamat -->

en: DVDRAM device
sq: periferiku DVDRAM

en: if set to yes, report unowned files.
sq: n�se konfigurohet me po, raportim i skedareve jo p�rkat�se.

en: This is HardDrake, a Mandrake hardware configuration tool.
    <span foreground="royalblue3">Version:</span> %s
    <span foreground="royalblue3">Author:</span> Thierry Vignaud &lt;tvignaud\@mandrakesoft.com&gt;
sq: Ky �sht� HardDrake, nj� veg�l konfigurimi p�r material Mandrake.
    <span foreground="royalblue3">Versioni:</span> %s
    <span foreground="royalblue3">Authori:</span> Thierry Vignaud &lt;tvignaud\@mandrakesoft.com&gt;

en: You don't have a swap partition.
    
    Continue anyway?
sq: Ju nuk posedoni nj� ndarje swap.
    
    Vazhdo pa marr� parasysh?

en: Version:
sq: Versioni:

en: Server IP missing!
sq: Serveri IP mungon!

en: Suriname
sq: Surinami

en: Use a floppy
sq: P�rdore nj� disket� floppy

en: Enable ACPI
sq: Autorizoje ACPI

en: Give write access to ordinary users
sq: Dhuro nj� leje shkrimi p�r p�rdorues t� zakonsh�m

en: Graphical Environment
sq: Mjedis Grafik�

en: Gibraltar
sq: Gjilbrartari

en: Do nothing
sq: Mos vepro

en: Delete Client
sq: Zhduke Klientin

en: Filesystem type:
sq: Tip i sistemit t� skedareve:

en: Starting network...
sq: Nisja e rrjetit...

en: Vietnam
sq: Vietnami

en: /_Fields description
sq: /_Zonat p�rshkuese

en: Optimize your security by using Mandrake Linux
sq: Ngriteni sigurin� tuaj duke p�rdorur Mandrake Linux

en: Help
sq: Ndihm�

en: Check if the network devices are in promiscuous mode
sq: Verifikoje n�se periferiku i rrjetit �sht� n� mod� t� p�rzier

en: Your personal phone number
sq: Numri i juaj personal i telefonit

en: Which size do you want to keep for Windows on
sq: Cil�n madh�si d�shironi ta rezervoni p�r Windows

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
sq: Faqja e testit �sht� d�rguar n� stampues.
    K�saj etape i nevojiten disa minuta para se t� filloj stampimi i faqes.

en: Username required
sq: Emri i p�rdoruesit nevojitet

en: Device
sq: Periferik

en: Depending on the default language you chose in Section , DrakX will
    automatically select a particular type of keyboard configuration. However,
    you may not have a keyboard that corresponds exactly to your language: for
    example, if you are an English speaking Swiss person, you may have a Swiss
    keyboard. Or if you speak English but are located in Quebec, you may find
    yourself in the same situation where your native language and keyboard do
    not match. In either case, this installation step will allow you to select
    an appropriate keyboard from a list.
    
    Click on the "%s" button to be presented with the complete list of
    supported keyboards.
    
    If you choose a keyboard layout based on a non-Latin alphabet, the next
    dialog will allow you to choose the key binding that will switch the
    keyboard between the Latin and non-Latin layouts.
sq: Normalisht, DrakX e zgjedh� tastier�n e sakt� p�r ju (mvar�sisht nga gjuha
    e zgjedhur). Megjithat�, �sht� e mundur q� ju nuk posedoni nj� tastier�
    q� i p�rshtatet gjuh�s suaj: p�r shmebull, n�se ju e flitni Anglishten dhe
    posedoni nj� tastier� Zvic�rrane, dhe d�shironi ta p�rdorni tastier�s me
    p�rpar�si Zvicrrane. Ose n�se e flitni Anglisht�n dhe jetoni n� Kebek,
    ju mund t� gjindeni n� t� nj�jtin situacion. N� t� dyja rastet, ju duhet
    t� ktheheni mbrapa k�saj� etape instaluese dhe t� zgjidhni tastier�n
    p�rkat�se nga lista p�rkat�se.
    
    Klikoni mbi kops�n "%s" q� t� prezentohet lista komplete e tastierave
    p�rkrah�se.
    
    N�se ju e zgjedhni nj� tastiere e cila nuk bazohet me alfabetin latin�,
    ju do t� pyeteni p�r n� dialogun e ardhsh�m p�r kombinimin e kopsave
    t� cil�t do t� ju mund�sojn� shk�mbimin mes Latine dhe joLatine.

en: SMB (Windows 9x/NT) Printer Options
sq: Konfigurim i nj� stampuesi SMB (Windows 9x/NT)

en: Valid user list changed, rewriting config file.
sq: Lista valide e p�rdorusit �sht� ndryshuar, rishkruarja e skedares konfiguruese.

en: mkinitrd optional arguments
sq: argument i p�rgjithsh�m p�r mkinitrd

en: Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org.
sq: Lundro n� Web me  Mozilla ose Konqueror, lexoni letrat tuaja me Evolution ose Kmail, krijoni dokumentet tuaja me OpenOffice.org.

en: Protocol for the rest of the world
sq: Protokol p�r pjes�n tjet�r t� bot�s

en: Print test pages
sq: Shtype faqen e testit

en: Activate now
sq: Aktivizoje tani

en: 64 MB or more
sq: 64 MB ose m� shum�

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
sq: Ju lutemi zgjedhni faqet e testit t� cilat d�shironi ti shtypni.
    Sh�nim: faqja e testit me foto, mund t� merr� nj� koh� t� gjat� derisa t� shtypet t�r�sisht, kurse me stampues lazer dhe m� me pak� memori �shte e mundur q� ajo t� mos shtypet fare, mir�po n� shumic�n e rasteve testi standart �sht� i mjaftuesh�m.

en: Please select the device where your %s is attached
sq: Ju lutemi zgjedheni mjetin %s ku ai �sht� i lidhur

en: Not formatted
sq: I pa formatuar

en: Periodic Checks
sq: Verifikime periodike

en: PXE Server Configuration
sq: Konfigurimi i Serverit PXE

en: Backup the system files before:
sq: Regjistroje sistemin e skedareve m� par� se:

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
sq: Ky �sht� nivel i siguris� standard i rekomanduar p�r nj� kompjuter q� p�rdoret me lidhje n� Internet si nj� klient.

en: First floppy drive
sq: Lexuesi i par� floppy

en: /File/_Quit
sq: /Skedare/_Braktise

en: Dvorak
sq: Dvorake

en: Choose the new size
sq: Zgjedheni nj� madh�si t� re

en: Media class
sq: Klas� e medias

en: You need to log out and back in again for changes to take effect
sq: Ju duhet t� lidheni jasht� tij dhe t� hyni prap� p�r ndryshimet b�ra m� par�.

en: The %s is not known by this version of Scannerdrake.
sq: Skaneri %s nuk p�rkrahet nga ky version i Scannerdrake.

en: Faroe Islands
sq: Ishujt e Faroes

en: Restart XFS
sq: Rinise XFS

en: Add host/network
sq: Shtoje ftusin/rrjetin

en: Model name
sq: Emri i modelit

en: Albania
sq: Shqip�ria

en: British Indian Ocean Territory
sq: Teritor Britanik� n� Oqeanin e Indis�

en: Normal Mode
sq: Mod� Normal

en: No CD-R/DVD-R in drive!
sq: Asnj� CDR/DVDR n� lexues!

en: Printer connection type
sq: Tipi i lidhjes s� stampuesit

en: No network adapter on your system!
sq: Asnj� rrjet (network) i p�rshtatur n� sistemin tuaj!

en: Network %s
sq: Rrjeti %s

en: Malayalam
sq: Malajalam

en: Option %s out of range!
sq: Opcioni %s �sht� jasht� kufirit!

en: Connect %s
sq: Lidhja e %s

en: Restarting CUPS...
sq: Rinise CUPS...

en: Printing/Scanning/Photo Cards on "%s"
sq: Stampimi/Skanimi/Kartelat Fotografike n� "%s"

en: Duplicate mount point %s
sq: Pik� montuese e dyfisht %s

en: if set to yes, run chkrootkit checks.
sq: n�se konfigurohet me po, nisi verifikimet chkrootkit.

en: Connection Configuration
sq: Konfigurimi i Lidhjes

en: Unknown|Generic
sq: I pa njoftur|P�rgjithsh�m

en: At the time you are installing Mandrake Linux, it is likely that some
    packages have been updated since the initial release. Bugs may have been
    fixed, security issues resolved. To allow you to benefit from these
    updates, you are now able to download them from the Internet. Check "%s"
    if you have a working Internet connection, or "%s" if you prefer to
    install updated packages later.
    
    Choosing "%s" will display a list of places from which updates can be
    retrieved. You should choose one nearer to you. A package-selection tree
    will appear: review the selection, and press "%s" to retrieve and install
    the selected package(s), or "%s" to abort.
sq: Nga momenti kur ju jeni duke instaluar Mandrake Linux, �sht� e mundur q�
    disa pako jan� azhurnuar prej daljes s� atij prodhimi. Disa buge mund
    t� korigjohen, njashtu dhe probleme tjera t� siguris�. P�r t� ju
    mund�suar t� p�rfitoni nj� azhurnim, do t� jen� t� propozuara q� t�
    tranferohen nga Interneti. Zgjedheni "%s" n�se ju posedoni nj� kyqje
    Internet, ose "%s" n�se ju preferoni q� t'instaloni azhurnimet nj� her�
    tjet�r.
    
    Duke zgjedhur "%s", lista e siteve nga t� cilat b�hen azhurnimet mund t�
    provohen. Zgjedhni sitet m� t� af�rta. Mandej nj� dru i deg�zuar
    me zgjedhje t� pakove do t� �faqet: verifikone zgjedhjen, dhe klikoni mbi
    "%s", p�r t� provuar instalimet apo azhurnimet e pakove t� zgjedhura,
    ose mni "%s" p�r ti braktisur.

en: Myanmar
sq: Mjanmari

en: Quit
sq: Braktise

en: Auto allocate
sq: Ndarje automatike

en: Check bad blocks?
sq: Verifikim i bloqeve t� d�mtuara?

en: Other MultiMedia devices
sq: Tjet�r mjet MultiMedia

en: burner
sq: gdhend�s

en:  (Default is all users)
sq: (Me marr�veshje p�r t� gjith� p�rdoruesit)

en: No remote machines
sq: Asnj� makin� e larg�t

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
sq: 
    Mir�sevini n� Asistentin p�r Konfigurimin e Stampuesit
    
    Ky asistent do t� ju ndihmoj� q� ta instaloni stampuesin(t) tuaj t� lidhur n� k�t� kompjuter.
    
    N�se e keni lidhur stampues n� k�t� kompjuter, ju lutemi lidhni at�/ata n� k�t� kompjuter ndizni at�/ata, q� m� n� fund ai/ata t� zbulohet(n) automatikisht.
    
    Klikoni mbi "Tjetri" kur ju jeni gati, dhe mbi "Anulo" n�se ju, nuk d�shironi ta konfiguroni stampuesin(t).

en: Authentication NIS
sq: V�rtet�simi NIS

en: Option ``Restrict command line options'' is of no use without a password
sq: Opcioni ``Restrict command line options'' �sht� i pa mundur pa parull�

en: Internet Connection Sharing currently enabled
sq: Shp�rndarja e lidhjes Internet �sht� aktivizuar

en: United Arab Emirates
sq: Emiratet e Bashkuara Arabe

en: Card IO_0
sq: Kartela IO_0

en: Disable Local Config
sq: �fuqizoje Konfigurimin Lokal

en: Thailand
sq: Tailande

en: Card IO_1
sq: Kartela IO_1

en: Search:
sq: Hulumto:

en: Kazakhstan
sq: Kazakstani

en: Routers:
sq: Shkrimtar�t:

en: Write
sq: Shkruarje

en: Display all available remote CUPS printers
sq: Paraqiti t� gjith� stampuesit e larg�t CUPS

en: Mandrake Linux Installation %s
sq: Instalimi i Mandrake Linux %s

en: Unknown driver
sq: Pilot i pa njoftur

en: Thai keyboard
sq: Tastiera Tajlandeze

en: Bouvet Island
sq: Ishulli Buve

en: Dialup options
sq: Opcionet me thirrje telefonike

en: If no port is given, 631 will be taken as default.
sq: N�se asnj� port nuk jepet, 631 do t� pranohet me marr�veshje.

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
sq: Nd�rrojeni Cd-Rom tuaj!
    
    Ju lutemi futni Cd-Rom e emruar "%s" n� lexuesin tuaj dhe shtypni mbi Ok.
    N�se ju nuk e posedoni, shtypni mbi kops�n Anulo q� m� n� fund t� mos instaloni asgj� nga ky Cd-Rom.

en: Polish
sq: Polonishte

en: 	-Network by webdav.
sq: 	-Rrjeti nga webdav.

en: , multi-function device on a parallel port
sq: , periferik multi-funksionel n� port�n paralele

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
sq: Asnj� p�rshtat�s i rrjetit ethernet s'�sht� zbuluar n� sistemin tuaj. Ju lutemi niseni mjetin me vegl�n konfiguruese.

en: Netmask
sq: Mask� nd�r rrjet

en: No hard drives found
sq: Asnj� disk i fort (hard drive) n� k�t� sistem

en: 2 buttons
sq: 2 kopsa

en: Logitech CC Series
sq: Logitech CC Serijalet

en: What kind is your ISDN connection?
sq: �far� tipi �sht� lidhja e juaj ISDN?

en: Label
sq: Etiketa

en: Save on floppy
sq: Shp�toi n� disket�

en: Check open ports
sq: Zbuloi portat e hapura

en: Edit selected printer
sq: Botoje stampuesin e zgjedhur

en: Printer auto-detection
sq: Zbulim automatik p�r stampues

en: Which of the following is your ISDN card?
sq: Cila nga kartelat vijuese, �sht� kartela e juaj ISDN?

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
sq: NFS �sht� nj� protokol i popullarizuar p�r shp�rndarjen e skedareve duke
    kaluar n� rrjetin TCP/IP. Ky servis mund�son funksionimin e serverit NFS,
    i cili konfigurohet mes rrjetit ne skedaren /etc/exports.

en: => Notice, a label changed:
    %s
sq: => Sh�noni, se nj� lajm� �sht� nd�rruar:
    %s

en: Number of capture buffers:
sq: Numri i tamponave t�rheq�s

en: Your choice? (0/1, default `%s')
sq: Zgjedhja juaj? (0/1, me marr�veshje t� `%s')

en: Any partitions that have been newly defined must be formatted for use
    (formatting means creating a file system).
    
    At this time, you may wish to reformat some already existing partitions to
    erase any data they contain. If you wish to do that, please select those
    partitions as well.
    
    Please note that it is not necessary to reformat all pre-existing
    partitions. You must reformat the partitions containing the operating
    system (such as "/", "/usr" or "/var") but you do not have to
    reformat partitions containing data that you wish to keep (typically
    "/home").
    
    Please be careful when selecting partitions. After formatting, all data on
    the selected partitions will be deleted and you will not be able to recover
    it.
    
    Click on "%s" when you are ready to format partitions.
    
    Click on "%s" if you want to choose another partition for your new
    Mandrake Linux operating system installation.
    
    Click on "%s" if you wish to select partitions that will be checked for
    bad blocks on the disk.
sq: Secila ndarje e p�rcaktuar p�rs�ri duhet t� formatohen,(q� d.m.th.
    do t� krijohet nj� sistem e skedareve n� t�).
    
    N� k�t� moment, ju mund ti riformatoni ndarjet ekzistuese p�r zhdukjen e
    t� dh�nave prezente. Dhe q� duhet ti zgjedhni ato.
    
    Duke ditur se nuk �sht� e nevojshme t� riformatohet p�rmbajtja e t�r�
    sistemit eksploatues, (sikur "/", "/usr" apo "/var") mir�po nuk
    �sht� e nevojshme t� formatohen ndarjet e t� dh�nave (zakonisht n� "/home").
    Keni kujdes kur ti zgjidhni ndarjet e riformatuara, do t� jet� e pa mundur
    t� rikuperohen t� dh�nat n� to.
    
    Klikoni mbi "%s" kur ju jeni i gatsh�m q� ti formatoni ndarjet.
    
    Klikoni mbi "%s" n�se ju d�shironi t� zgjedhni nj� ndarje tjet�r apo
    t� instaloni nj� sistemi t� ri eksploatues Mandrake Linux.
    
    Klikoni mbi "%s" n�se ju d�shironi ti zgjedhni ndarjet, p�r nj�
    verifikim t� sektor�ve t� d�mtuar n� disk.

en: French
sq: Fragjisht

en: Czech (QWERTY)
sq: �eke (QWERTY)

en: Allow X Window connections
sq: Mund�soi lidhjet me X Window

en: Hardware probing in progress
sq: Testimi i mjeteve n� vazhdim e sip�r

en: Net Device
sq: Mjeti Net

en: Summary
sq: P�rmbledhje

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
sq:  (Portat Paralele: /dev/lp0, /dev/lp1, ..., nj�jt� sikur tek LPT1:, LPT2:, ..., stampues 1-r� USB: /dev/usb/lp0, stampues 2-t� USB: /dev/usb/lp1, ...).

en: Next
sq: Tjetri

en: You can't install the bootloader on a %s partition
sq: Ju nuk mund t� instaloni programin bootloader mbi nj� ndarje %s

en: Puerto Rico
sq: Puerto Riko

en: (bootp/dhcp/zeroconf)
sq: (bootp/dhcp/konfigurimzero)

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
sq: 
    Mir�sevini.
    
    Parametrat auto instalues jan� n� t� lir� n� sektor�t e majt�

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
sq: pakoja 'ImageMagick' nevojitet q� t� funksionoj si duhet.
    Kliko mbi "Ok" p�r t� instaluar 'ImageMagick' ose mbi "Anulo" p�r ta braktisur

en: Lithuanian "number row" QWERTY
sq: Lituanis� "vij� e numrave" QWERTY

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
sq: Pakot a radhitura do t� zhduken p�t t� azhurnuar sistemin tuaj: %s
    
    
    Me t� v�rtet� d�shironi ti zhdukni?

en: Anguilla
sq: Anguila

en: NIS Domain
sq: Pron� NIS

en: Antarctica
sq: Antarktika

en: 
    - User Files:
sq: 
    - Skedaret e P�rdoruesit:

en: Mount options
sq: Opcionet montuese

en: Jamaica
sq: Jamaika

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle or DVD players
sq: Mund�son paraqitjen e mjeteve t� tipit blok (p�r shembull shp�rndarjen e
    diskut t� fort), p�r ta p�rdorur n� aplikacionet sikur Oracle apo lexues DVD

en: Please wait, preparing installation...
sq: Keni durim ju lutemi, pregatitje p�r instalim...

en: Czech (QWERTZ)
sq: �eke (QWERTZ)

en: Track network card id (useful for laptops)
sq: Identifukues i kartel�s s� rrjetit (i p�doruesh�m p�r kompjuter celular)

en: The port number should be an integer!
sq: Numri i port�s duhet t� jet� nj� num�r i plot�!

en: You must choose an image file first!
sq: Ju mund t� zgjidhni nj� skedare imazhi n� fillim!

en: Restore from Hard Disk.
sq: Riparoje nga Disku i Fort�

en: Add to LVM
sq: Shto n� LVM

en: DNS server
sq: Server DNS

en: Trinidad and Tobago
sq: Trinidad dhe Tobago

en: LPD and LPRng do not support IPP printers.
sq: LPD dhe LPRng nuk i p�rkrah� stampuesit IPP.

en: Host name or IP.
sq: Emri i ftuesit apo IP.

en: /_Edit
sq: /_Boto

en: simple
sq: thjesht�

en: Clear all
sq: Zhduki t� gjitha ndarjet

en: No test pages
sq: Asnj� test i faqeve

en: Falkland Islands (Malvinas)
sq: Ishujt e Maluines

en: Adapter %s: %s
sq: P�rshtate %s: %s

en: Boot disk creation
sq: Krijimi i nj� diskete boot

en: Monday
sq: e h�n�

en: Unknown model
sq: Model i pa njoftur

en: if set to yes, check files/directories writable by everybody.
sq: n�se konfigurohet me po, verifikoji skedaret/repertor�t e shkruesh�m nga secili person�.

en: authentication
sq: v�rtet�sim

en: Backup Now
sq: Regjistroi Tani

en: /_File
sq: /_Skedare

en: Removing printer from Star Office/OpenOffice.org/GIMP
sq: Zhdukja e stampuesit nga Star Office/OpenOffice.org/GIMP

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
sq: Nise nj� filter t� pakos n� rrjet, p�r serin� e b�rtham�s Linux 2.2,
    q� m� n� fund t� vej� n� vend t� duhur, nj� mur�-t�-zjarrt� (firewall) p�r ta mbrojtur makin�n tuaj nga sulmet e rrjetit internet.

en: Editable
sq: Botues

en: Which dhcp client do you want to use ? (default is dhcp-client)
sq: Cilin klient dhcp d�shironi ta p�rdorni? (Me marr�veshje �sht� klienti-dhcp)

en: Tamil (ISCII-layout)
sq: Tamile (ISCII-layout)

en: Mayotte
sq: Majoto

en: Set shell commands history size. A value of -1 means unlimited.
sq: Konfiguroje madh�sin� e urdh�rave n� skedaren histori n� shell. Vlera -1 d.m.th. e pas kufizuar.

en: Creating auto install floppy...
sq: Krijimi i nj� diskete auto instaluese...

en: Searching for scanners ...
sq: Hulumtimet p�r skaner�...

en: Russia
sq: Rusis

en: Partitioning
sq: Shp�rndarja

en: ethernet card(s) detected
sq: zbulim i kartel�s ethernet

en: Can't create catalog!
sq: Nuk mund ta krijoj katalogun!

en: Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager.
sq: Kompletoni konfigurimin tuaj t� siguris� me softverin e leht� n� p�rdorim, i cili kombinon komponentet me performanc� t� lart� sikur muri i zjarrt, rrjeti virtual privat (VPN) server dhe klient, nj� nd�rhyr�s zbulues i sistemit dhe nj� administrues trafiku.

en: Not enough free space for auto-allocating
sq: Vend i pa mjaftuesh�m p�r nj� ndarje auto-huazuese

en: Set root password
sq: Paraqite parull�n root

en: Enable IP spoofing protection
sq: Aktivizoje/Blokoje mbrojtjen nga talljet IP

en: There's no free driver for your sound card (%s), but there's a proprietary driver at "%s".
sq: Asnj� pilot i lir� p�r kartel�n tuaj t� z�rit (%s), mir�po aty gjindet nj� pilot me pron� n� "%s".

en: Group :
sq: Grupi :

en: After resizing partition %s, all data on this partition will be lost
sq: Mbasi q� ta ridimenziononi ndarjen %s, t� gjitha t� dh�nat n� at� ndraje do t� zhduken

en: Internet connection configuration
sq: Konfigurimi i lidhjes internet

en: Add the name as an exception to the handling of password aging by msec.
sq: Shtoje emrin sikur nj� pranim mbi mbajt�sin� e parull�s s� ndryshuar nga msec.

en: Scanning for TV channels
sq: K�rkimi i kanaleve TV

en: Kernel:
sq: B�rthama:

en: /_About...
sq: /_N� lidhje me...

en: Preference:
sq: P�lqimi:

en: Services: %d activated for %d registered
sq: Serviset: %d aktivizohen p�r %d e regjitruar�

en: Create a bootdisk
sq: Krijoe nj� disket� bootdisk

en: Solomon Islands
sq: Ishujt Solomone

en: Please test your mouse:
sq: Ju lutemi testone minin tuaj:

en: (module %s)
sq: (modul� %s)

en: Workgroup
sq: Grupi Punues

en: Printer host name or IP
sq: Emri i ftuesit apo i IP

en: Host Path or Module
sq: Shtegu apo Moduli i Ftuesit

en: Name of printer should contain only letters, numbers and the underscore
sq: Emri i stampuesit duhet t� posedoj vet�m shkronja, num�ra dhe vija t� ulta (_)

en: Show current interface configuration
sq: �faqe konfigurimin e interfacit t� tanish�m

en: Add Printer
sq: Shtoje nj� Stampues

en: The argument specifies if clients are authorized to connect
    to the X server from the network on the tcp port 6000 or not.
sq: Argumentet e specifikuara jan� klient me autorizim lidh�s
    n� server X n� port�n tcp 6000 ose jo.

en: Development
sq: Zhvillimi

en: Done
sq: P�rfundoi

en: Web Server
sq: Server Web

en: Chile
sq: Qili

en: 	Do not include System Files
sq: 	Mos e p�rfshij� Sistemin e Skedareve

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
sq: Pilot�t e stampimit inkjet t� furnizuar nga Lexmark pranojn� t� p�rdoren me stampues lokal, dhe jo me stampues t� larg�t apo ata server. Ju lutemi, lidheni stampuesin tuaj n� nj� port� lokale, ose konfigurojeni at�, n� makin�n q� �sht� i lidhur.

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
sq: Aparati i juaj me multi-funksione HP �sht� konfiguruar automatikisht, q� t� jet� n� gjendje t� gatshme p�r skanim. Tani ju mund t� skanoni me ndihm�n e "scanimage" ("scanimage -d hp:%s" p�r t� specifikuar n�se ju posedoni m� shum� se nj�) nga linja komanduese, apo me interface grafik sikur "xscanimage" ose "xsane". N�se ju e p�rdorni GIMP, ju mund ta skanoni me ndihm�n e menus� "Skedare"/"P�rfitim". P�r m� shum� informacione, ju mund ta shtypni urdh�rin "man scanimage" n� linj�n komanduese.
    
    Mos e p�rdorni "scannerdrake" p�r k�t� aparat!

en: (already added %s)
sq: (n� shtim e sip�r %s)

en: Bootloader installation in progress
sq: Instalimi i Bootloader n� vazhdim e sip�r

en: , using command %s
sq: , duke p�rdorur urdh�rin %s

en: Alt and Shift keys simultaneously
sq: �el�sat e nj�kohsh�m Alt dhe Shift

en: Flags
sq: Shenjat�

en: Add/Del Users
sq: Shtoi/Zhduki P�rdoreusit

en: Host/network IP address missing.
sq: Ftuesi/rrjeti adresa IP mungon.

en: weekly
sq: gjdo jav�

en: Settings
sq: Rregullimet

en: The entered host/network IP is not correct.
sq: Hyrja e ftuesit/rrjetit IP nuk �sht� e korrekte.

en: Create/Transfer backup keys for SSH
sq: Krijo/Trasfero �el�sa regjistrues p�r SSH

en: Here is the full list of available countries
sq: Ja ku �sht� lista komplete e shteteve n� disponibilitet

en: Alternative test page (A4)
sq: Faqe testi alternativ� (A4)

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
sq: N�se ju posedoni t� gjitha CD-t� n� list�n vijuese, klikoni mbi Ok.
    N�se ju nuk posedoni asnj� nga k�to CD-e, klikono mbi Anulo.
    N�se vet�m disa nga CD-t� mungojn�, �zgjedhi, dhe klikoni mbi Ok.

en: Wait please
sq: Nj� moment ju lutemi

en: Backup user files
sq: Regjistrimi i skedareve p�r p�rdorues

en: New
sq: E Re

en: This is the most crucial decision point for the security of your GNU/Linux
    system: you have to enter the "root" password. "Root" is the system
    administrator and is the only user authorized to make updates, add users,
    change the overall system configuration, and so on. In short, "root" can
    do everything! That is why you must choose a password that is difficult to
    guess - DrakX will tell you if the password that you chose too easy. As you
    can see, you are not forced to enter a password, but we strongly advise you
    against this. GNU/Linux is just as prone to operator error as any other
    operating system. Since "root" can overcome all limitations and
    unintentionally erase all data on partitions by carelessly accessing the
    partitions themselves, it is important that it be difficult to become
    "root".
    
    The password should be a mixture of alphanumeric characters and at least 8
    characters long. Never write down the "root" password -- it makes it far
    too easy to compromise a system.
    
    One caveat -- do not make the password too long or complicated because you
    must be able to remember it!
    
    The password will not be displayed on screen as you type it in. To reduce
    the chance of a blind typing error you will need to enter the password
    twice. If you do happen to make the same typing error twice, this
    ``incorrect'' password will be the one you will have use the first time you
    connect.
    
    If you wish access to this computer to be controlled by an authentication
    server, click the "%s" button.
    
    If your network uses either LDAP, NIS, or PDC Windows Domain authentication
    services, select the appropriate one for "%s". If you do not know which
    one to use, you should ask your network administrator.
    
    If you happen to have problems with remembering passwords, if your computer
    will never be connected to the internet or that you absolutely trust
    everybody who uses your computer, you can choose to have "%s".
sq: K�tu duhet t� dini se do ta merrnji nj� vendim m� t� v�shtir�, p�r sigurin�
    e sistemit tuaj GNU/Linux: ju duhet t� futni parull�n sikur administrator
    "root". "Root" �sht� administrues i sistemit me t� gjitha t� drejtat
    e konfigurimit, azhurnimit, shtimit t� p�rdorues�ve etj. Konkretisht "root"mund t� b�j� �do gj� n� sistemin tuaj! Dhe p�r at� ar�sye ju duhet t� futni
    parull�n e tij, q� �sht� shum� veshtir� ta merrni me mend at� -- DrakX do
    t� ju tregoj n�se �sht� leht�. Siq po e shifni, ju mund t� mos e futni
    parull�n ne ju rekomandojm� sinqerisht kund�r k�saj veprimtarie. Duke ditur
    se gabimet b�hen shum� leht� dhe pa ditur, nj� p�rdorues me t� gjitha t�
    drejtat mund t� b�j� �mos�. Prej q� se "root" mund t� p�rfitoj� gjdo
    t� drejt� pa kufi i cili mund t� zhduk� t� gjitha t� dh�nat, duke kaluar
    n� secil�n ndarje t� diskut, �sht� me r�nd�si q� me v�shtir�si t� madhe t�
    sh�nd�rroheni n� administrator "root".
    
    Zgjedhja e parull�s duhet t� p�rmbaj� s� paku 8 karaktere (shkronja, numra
    etj) alfanumerik�. Mos e shkruani kurr� parull�n "root" diku, mundohuni
    ta mbani n� mend.
    
    Megjithat�, mos e shkruani parull�n shum� t� gjat� apo t� komplikuar, sepse
    ju duhet t� jeni n� gjendje, ta mbani n� mend, pa u mundur shum�.
    
    Parulla nuk do t� paraqitet n'ekran, sikur e shtypni n� tastier� direkt, prej
    nga, ju duhet ta shtypni dy her�, p�r t� zvog�luar gabimin e mundsh�m. N�se
    nj� gabim i till� arrin�, at�her� kjo parull� ``e pa sakt�'' do t� regjistrohet,
    dhe ju duhet ta rishtypni p�r t� hyr� n� sistemin tuaj p�r t� par�n her�.
    
    N�se ju d�shironi t� hyni n� k�t� kompjuter p�r tu kontrolluar nga nj� server
    v�rtetues, kliko mbi kops�n "%s".
    
    N�se rrjeti i juaj p�rdor� LDAP, NIS apo nj� pron� PDC Windows p�r servise
    v�rtetuese, zgjedheni nj� qarkullim sikur "%s". N�se ju nuk
    dini cilin ta p�rdorni, pyetni administratorin e rrjetit tuaj.
    
    N�se ju hasni n� ndonji problem, n� lidhje me parull�n, ju mund ta zgjedhni
    mund�sin� "%s", n�se kompjuteri juaj nuk duhet t� kyqet n� rrjetin
    e Internetit, dhe n�se ju keni besim n� secilin perdorues i cili hyn� n�
    sistemin tuaj.

en: Name resolution spoofing protection
sq: Emri i vendosm�ris� me mbrojtje tall�se

en: At this point, DrakX will allow you to choose the security level desired
    for the machine. As a rule of thumb, the security level should be set
    higher if the machine will contain crucial data, or if it will be a machine
    directly exposed to the Internet. The trade-off of a higher security level
    is generally obtained at the expense of ease of use.
    
    If you do not know what to choose, stay with the default option.
sq: N� k�t� etap�, DrakX duhet t� ju ket� mund�suar p�rfundimin e nivelit
    t� siguris� s� duhur p�r sistemin tuaj. Niveli i sigurimit s� duhur �sht�
    i p�rcaktuar simbas funksionit t� eksploatimit t� sistemit t� p�rdoruesve
    tjer� (n�se �sht� i kyqur direkt n� rrjetin internet) dhe simbas nivelit
    t� ndishm�ris� s� p�rmbajtjes s� informacioneve t� sistemit (numri i
    kartel�s kreditore p�r shembull). Nuk duhet t� harroni se n� m�nyr� t�
    p�rgjithshme, aq m� m� e madhe t� jet� siguria e sistemit, aq m�
    shum� �sht� e komplikuar.
    
    N�se ju nuk dini cilin nivel� ta zgjidhni, at�here mbane nivelin me marr�veshje.

en: Load from floppy
sq: Ngarkoje nga disketa

en: The following printer was auto-detected.
sq: Stampuesi me radh� nuk �sht� zbuluat automatikisht.

en: Uses command %s
sq: P�rdorimet e urdh�rave %s

en: Boot Floppy
sq: Diskete me nisje t� udh�zuar

en: Norwegian
sq: Norvegjisht

en: Searching for new scanners ...
sq: Hulumtimi p�r skaner t� rinj�...

en: stepping of the cpu (sub model (generation) number)
sq: etapa t� cpu (nd�r model (prodhimi) numri)

en: select path to restore (instead of /)
sq: zgjedhe shtegun p�r ta riparuar (n� vend te /)

en: Configure bootsplash picture
sq: Konfiguro nj� imazh me nisje t� udh�zuar

en: Georgia
sq: Gjeorgjia

en: China
sq: Kina

en:  (Make sure that all your printers are connected and turned on).
sq:  (Verifikoni n�se t� gjith� stampuesit jan� t� lidhur dhe t� ndezur).

en: Reading data of installed printers...
sq: Leximi i t� dh�nave t� stampuesve t� instaluar...

en:  Erase Now
sq:  Shlyeje Tani

en: Insert a FAT formatted floppy in drive %s
sq: Futni nj� disket� t� formuar n� FAT (format DOS/Windows) %s

en: yes means the processor has an arithmetic coprocessor
sq: po d.m.th. pocesori posedon nj� aritmetik� t� kopocesorve

en: Please Wait... Applying the configuration
sq: Nj� moment ju lutemi... P�rshtatja e konfigurimit

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Welcome to GRUB the operating system chooser!
sq: Mir�sevini n� ngarkuesin GRUB t� sistemit eksploatues!

en: SCSI controllers
sq: Kontrolluesit SCSI

en:  on LPD server "%s", printer "%s"
sq:  n� serverin LPD "%s", stampuesi "%s"

en: Choosing a display manager
sq: Zgjedhja e nj� administratori �faq�s

en: Zeroconf Host name
sq: Konfigurimi zero dhe Emri i ftuesit

en: Custom setup/crontab entry:
sq: Dogan� hyrja nd�rtuese/crontabel�:

en: IP address should be in format 1.2.3.4
sq: Adresa IP duhet t� jet� n� form�n 1.2.3.4

en: Configure CUPS printing system
sq: Konfiguroje sistemin CUPS stampues

en: Ecuador
sq: Ekuatori

en: Add an item
sq: Shtoje nj� element

en: The printers on this machine are available to other computers
sq: Stampuesit n� k�t� makin� jan� t� lir� p�r nj� kompjuter tjet�r

en: I can't find needed image file `%s'.
sq: E pa mundur gjetja e skedares imazhe `%s'.

en: No sound card detected. Try "harddrake" after installation
sq: Asnj� kartel� e zbuluar. Provo "harddrake" mbas� instalimit

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
sq: Port� e dh�n� gabimisht: %s.
    Formati i pranuesh�m �sht� "port/tcp" ose "port/udp", 
    ku porta �sht� mes 1 dhe 65535.

en: Sao Tome and Principe
sq: Sao Tome dhe Principali

en: Can't login using username %s (bad password?)
sq: Nuk mund t� lidheni me k�t� em�r %s (parull� e gabura?)

en: Azerbaidjani (latin)
sq: Azerbeigjan (latine)

en: Package not installed
sq: Pako e pa instaluar

en: American Samoa
sq: Samoa Amerikane

en: Become a MandrakeExpert
sq: B�huni Expert Mandrake

en: Protocol
sq: Protokoli

en: Copy fonts on your system
sq: Kopjoni polisat n� sistemin tuaj

en: Harddrake help
sq: Ndihma Harddrake

en: Mandrake Terminal Server Configuration
sq: Konfigurim i Serverit me Terminale Mandrake

en: 
                        DrakBackup Report Details
sq: 
                        Raporti Regjistrues i Detajeve

en: Restore all backups
sq: Riparoi t� gjitha regjistrimet

en:  on parallel port #%s
sq:  n� port�n paralele #%s

en: Set the password minimum length and minimum number of digit and minimum number of capitalized letters.
sq: Konfiguroje parull�n me nj� gjat�si minimale, me numra digjitale minimal dhe num�r t� shkronjave.

en: if set to yes, check open ports.
sq: n�se konfigurohet me po, verifikoni portat e hapura

en: This may take a moment to erase the media.
sq: Zhdukja e k�tyre burimeve nevoj� nj� moment.

en: You can't select/unselect this package
sq: Ju nuk mund ti zgjedhni/�zgjedhni k�t� pako

en: Warning
sq: Kujdes

en: 
    - Other Files:
sq: 
    - Skedare t� Tjera:

en: Remote host name
sq: Emri ftues i larg�t

en: access to X programs
sq: hyrjer n� programet grafike X

en: Computing the size of the Windows partition
sq: P�rdorni hap�sir�n e ndarjes Windows

en: /_Refresh
sq: /_Rifreskoje

en: Italy
sq: Italia

en: Cayman Islands
sq: Ishujt e Cejlanit

en: Name of printer
sq: Emri i stampuesit

en: disable
sq: dezaktivizuar

en: error unmounting %s: %s
sq: gabim gjat� �montimit %s: %s

en: Do it!
sq: B�je at�!

en: %s not responding
sq: %s nuk p�rgjigjet

en: Select model manually
sq: Zgjedhe modelin manualisht

en: Format
sq: Formatim

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
sq: M�nyra m� e shpesht� p�r tu kyqur n� Internet duke p�rdorur linj�n
    ADSL dhe p�r p�rdoruesit pppoe. Disa kyqje p�rdorin pptp, dhe disa t� tjer�
    sh�rbehen me dhcp. N�se ju nuk dini �far� t� zgjedhni, 'p�rdoreni pppoe'

en: Various
sq: Ndryshimet

en: Left Alt key
sq: Kopsa Alt e Majt�

en: Load setting
sq: Ngarkoi Parametrat

en: 
    
    Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.
sq: 
    
    Printerdrake nuk mund ta p�rcaktoj� modelin e stampuesit tuaj %s. Ju lutemi zgjedheni modelin e sakt� nga lista e sh�nuar.

en: Set selected printer as the default printer
sq: Paraqite stampuesin e zgjedhur sikur me marr�veshje

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
sq: 
    Shenj�zoni stampuesit t� cil�t d�shironi ti transferoni, dhe 
    klikoni mbi "Transfero".

en: Albanian
sq: Shqipe

en: Lithuania
sq: Lituania

en: Compact
sq: Kompakt

en: Detected model: %s %s
sq: Model i zbuluar: %s %s

en: MandrakeSoft has selected the best software for you
sq: MandrakeSoft ka zgjedhur softveret p�r t� mir� ju

en: Local files
sq: Skedaret lokale

en: maybe
sq: ndoshta

en: Panama
sq: Panamaja

en: Can't open %s!
sq: Nuk mund ta hap� %s!

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
sq: Kartela juaj me sa duket posedon nj� dalje TV-OUT.
    Mund ta konfiguroj q� t� punoj� n� p�rdorimin e frame-buffer.
    
    P�r k�t� ju duhet ta kyqni kartel�n tuaj para se ta nisni kompjuterin tuaj.
    The mandej zgjedheni hyrjen "TVout" n� menun� paraprake
    
    A e posedoni k�t� fuksion?

en: Monitor
sq: Monitori

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
sq: Ju jeni n� pik�n e parametrave p�r stampim n� nj� drejtim t� Windows(it) me parull�. P�r shkak� t� nj� gabimi n� konceptin e nj� programi klient Samba, parulla �sht� shkruar n� m�nyr� t� qart� n� linj�n komanduese q� e d�rgon, n� transferimin e pun�s s� stampuesit n� nj� server Windows. Pra �sht� e mundur p�r �far�do p�rdoruesi t� k�saj makine, t� �faq� n� ekran k�t� parull�, thjesht� duke shtypur nj� urdh�r sikur "ps auxwww".
    
    Ne ju propozojm� q� t� p�rdorni zgjedhjet alternative me radh� (n� t� gjitha rastet, ju duhet t� jeni i sigurt se vet�m makinat tuaja t� rrjetit lokal mund t� hyn� n� serverin tuaj Windows, me ndihm�n e murit-t�-zjarrt� program shembull (firewall)):
    
    P�rdoreni nj� konto pa parull� n� serverin tuaj Windows, sikur nj� konto "MUSAFIR�", apo nj� konto enkas� vet�m p�r stampim. Mos e hiqni mbrojtjen e nj� kontoje me P�rdorues� apo Administrator.
    
    Parametrizoni serverin tuaj Windows q� m� n� fund, stampuesit t� jen� n� disponibilitet nd�r protokolin LPD. Mandej rregullone stampimin e k�saj makine me tip t� lidhjes "%s" n� Printerdrake.

en: 65 thousand colors (16 bits)
sq: 65 mij� ngjyra (16 bits)

en: 
    - Save on Hard drive on path: %s
sq: 
    - Shp�toje n� Disk t� Fort� n� shtegun: %s

en: Remove fonts on your system
sq: Zhdukni polisat n� sistemin tuaj

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
sq: Kujdes, p�rshat�si i rrjetit (%s) �sht� ve�se i konfiguruar.
    
    A d�shironi q� ai t� konfigurohet automatikisht?
    
    Ju mund ta b�ni manualisht, mir�po duhet t� dini se �far� b�ni n� k�t� operacion.

en: Graphical interface at startup
sq: Interfaci grafike n� nisje

en: format of floppies supported by the drive
sq: formatimi i disketave flopi, p�rkrahet nga ky lexues

en: Firmware copy failed, file %s not found
sq: Kopjimi i Firmware d�shtoi, skedarje %s nuk �sht� prezente

en: Not enough partitions for RAID level %d
sq: Vend i pa mjaftuesh�m i RAID p�r nivelin %d

en: local config: true
sq: konfigurim lokal: i v�rtet

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
sq: Stampuesit e radhitur jan� konfiguruar. Kliko dy-her� n� nj� stampues p�r ti ndryshuar parametrat e tij; p�r t� krijuar nj� stampues me marreveshje; apo p�r ti �faqur� informacionet p�r t�.

en: Connected
sq: Lidhur

en: Macedonian
sq: Maqedone

en: Bridges and system controllers
sq: Urat dhe sistemet kontrolluese

en: /File/_Save
sq: /Skedare/_Shp�toje

en: No details
sq: Asnj� detaj

en: very nice
sq: shum� mir�

en: Preview
sq: �faqje

en: Remote Control
sq: Kontrolim n� Distanc�

en: Please select media for backup...
sq: Ju lutemi zgjedheni p�rkrahjen q� duhet t� regjistrohet...

en: Wrong email
sq: email i gabuar

en: XFree86 server: %s
sq: Server XFree86: %s

en: Allow Thin Clients
sq: Lejo Klientat DHCP

en: Georgian ("Russian" layout)
sq: Gjeorgjishte (disponibilitet "Ruse")

en: /_Options
sq: /_Opcionet

en: Your printer model
sq: Modeli i stampuesit tuaj

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
sq: 
    
    (KUJDES! Ju jeni duke p�rdorur XFS p�r ndarjen tuaj rr�nj�zore (root),
    krijimi i nj� diskete boot (bootdisk) n� nj� disket� 1.44 Mb zakonisht
    do t� d�shton, sepse XFS ka nevoj� p�r nj� pilot� tejet t� madh�).

en: 
    - Delete hard drive tar files after backup.
sq: 
    - Zhduki skedaret tar nga disku i fort� mbasi q� ti regjistroni.

en: No CD or DVD image found, please copy the installation program and rpm files.
sq: Asnj� imazh i gjetur CD apo DVD, ju lutemi kopjone programin instalues dhe skedaret rpm.

en: Mandrake's multipurpose configuration tool
sq: Mandrake ju propozon nj� shumic� veglash p�r konfigurim

en: Save
sq: Shp�toje

en: The %s is unsupported
sq: Ky skaner %s nuk p�rkrahet fare

en: Load the drivers for your usb devices.
sq: Ngarkoi pilot�t p�r mjetet e kyqura n� usb.

en: Disk
sq: Disku

en: Enter a printer device URI
sq: Sh�noni adres�n e periferikut stampues URI

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community.
sq: Sukseset e MandrakeSoft jan� t� bazuara pik�risht� n� programet gratis.Sistemi i juaj i ri eksploatues �sht� rezulltat i pun�s s� p�rbashk�t i hapur p�r t� gjitha bashk�sit e Linux-it.

en: Israel
sq: Izraeli

en: French Guiana
sq: Guiana Franqeze

en: default:LTR
sq: me marr�veshje:LTR

en: A command line must be entered!
sq: Nj� urdh�r i pranuesh�m n� linj� duhet t� futet!

en: Select user manually
sq: Zgjedhi p�rdoruesit manualisht

en: Transfer printer configuration
sq: Transferoi t� dh�nat e konfigurimit p�r stampuesit

en: Do you want to enable printing on the printers mentioned above?
sq: A d�shironi t'aktivizoni stampimin mbi stampuesin e posht� sh�nuar?

en: Check additions/removals of suid root files
sq: Verifikoji mbledhjet/e zhdukshme nga skedaret suid root.

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
sq: Q� kjo t� punoj si duhet me nj� kontrolues kryesore t� pron�s (PDC) Windows 2000, ju duhet me siguri q� ta sinjalizoni administratorin nis�s:  C:\>net localgroup "Pre-Windows 2000 Compatible Access" ku secili /shton dhe e rinis� serverin.
    Ju njashtu keni nevoj� p�r emrin p�rdorues dhe parull�n e nj� administratori t� pron�s p�r tu bashkuar n� makin�n me pron�n Windows(TM).
    N�se rrjeti �sht� ende i aktivizuar, prona do t� bashkohet mbas� etap�s konfiguruese t� rrjetit.
    N�se kjo etap� d�shton nga ndonji arr�sye, e n�se v�rtet�simi nuk funksionon, niseni 'smbpasswd -j DOMAIN -U USER%%PASSWORD' duke e p�rdorur n� pron�n tuaj Windows(tm), emrin P�rdorues/Parull�n, mbas� nisjes s� sistemit me boot.
    Urdh�ri 'wbinfo -t' do t� testoj funksionimin e v�rtet�simit.

en: %s (Port %s)
sq: %s (Porta %s)

en: Use network connection to backup
sq: P�rdore rrjetin lidh�s p�r regjistrimr

en: Kernel version
sq: Versioni i b�rtham�s

en: It is now time to specify which programs you wish to install on your
    system. There are thousands of packages available for Mandrake Linux, and
    to make it simpler to manage the packages have been placed into groups of
    similar applications.
    
    Packages are sorted into groups corresponding to a particular use of your
    machine. Mandrake Linux has four predefined installations available. You
    can think of these installation classes as containers for various packages.
    You can mix and match applications from the various groups, so a
    ``Workstation'' installation can still have applications from the
    ``Development'' group installed.
    
     * "%s": if you plan to use your machine as a workstation, select one or
    more of the applications that are in the workstation group.
    
     * "%s": if plan on using your machine for programming, choose the
    appropriate packages from that group.
    
     * "%s": if your machine is intended to be a server, select which of the
    more common services you wish to install on your machine.
    
     * "%s": this is where you will choose your preferred graphical
    environment. At least one must be selected if you want to have a graphical
    interface available.
    
    Moving the mouse cursor over a group name will display a short explanatory
    text about that group. If you unselect all groups when performing a regular
    installation (as opposed to an upgrade), a dialog will pop up proposing
    different options for a minimal installation:
    
     * "%s": install the minimum number of packages possible to have a
    working graphical desktop.
    
     * "%s": installs the base system plus basic utilities and their
    documentation. This installation is suitable for setting up a server.
    
     * "%s": will install the absolute minimum number of packages necessary
    to get a working Linux system. With this installation you will only have a
    command line interface. The total size of this installation is about 65
    megabytes.
    
    You can check the "%s" box, which is useful if you are familiar with the
    packages being offered or if you want to have total control over what will
    be installed.
    
    If you started the installation in "%s" mode, you can unselect all groups
    to avoid installing any new package. This is useful for repairing or
    updating an existing system.
sq: Tani �sht� momenti q� ti zgjedhni pakot q� duhet t� instalohen n� sistemin
    tuaj. Duhet ta dini se Mandrake Linux p�rmban me mij�ra pako instaluese,
    dhe nuk �sht� me rend�si q� ti njifti t� gjitha p�r mend�sh.
    
    Pakot jan� t� radhitura n� grupe p�rkat�se p�r p�rdorim t� ve�ant n� makin�n
    tuaj. Mandrake Linux posedon kat�r instalime t� p�rcaktuara. Ju mund t�
    mendoni mbi k�to klasa instaluese si kontainer t� pakove t� ndryshme.
    Ju keni mund�si ti p�rzini (mix) dhe ti barazoni aplikacionet nga kontainer�t
    e ndrysh�m, sikur ``Stacion Punues'' instalimi mund t� posedoj ende
    aplikacione nga ``Zhvillimi'' i kontainerit instalues.
    
     * "%s": n�se ju mendoni ta p�rdorni stacionin punues n� k�t�, m�nyr�,
    zgjedhni nj� apo m� shum� aplikacion, q� gjinden n� kontainerin e stacionit
    punues.
    
     * "%s": n�se makina juaj do t� p�rdoret, p�r krijimin e programeve,
    zgjedhni pakot qarkulluese nga kontaineri.
    
     * "%s": n�se makina juaj do t� p�rdoret sikur server, ju mund ti
    zghedhni serviset p�rkat�se instaluese.
    
     * "%s": Ky grup do t� ju mund�soj p�rcaktimin e mjedisit grafik
    q� deshironi ta keni n� sistemin tuaj. Natyrisht, ju duhet ta zgjedhni
    m� s� paku nj�rin q� ta p�rdorni sistemin tuaj n� mod� grafik.
    
    Duke e vendosur minin nd�r emrin e nj� grupi, ju do ta v�reni �faqjen e nj�
    p�rshkrimi t� shkurt t� atij grupi. N�se ju i �zhgjidhni t� gjitha grupet
    gjat� instalimit standard (me kund�rshtim azhurnimi), nj� dialog do t�
    �faqet me propozime t� ndryshme zgjedh�se, p�r nj� instalim minimal:
    
     * "%s": instalon pako minimale t� mundshme, p�r t� patur nj� mjedis
    punues grafik n� tryez�.
    
     * "%s": instalon sistemin e baz�s, me disa p�rdorues t� tjer� t�
    baz�s dhe dokumnetacionet e tyre. Ky instalim �sht� i p�rdorsh�m sikur
    baz� p�r montimin e nj� serveri.
    
     * "%s": do t� instaloj m� s� paku q� �sht� e mundur n� sistemin
    punues Linux, vet�m n� linj� komanduese. K�tij instalimi i nevojiten
    65MB vend� t� zbraz�t.
    
    Ju mund ta verifikoni mund�sin� me "%s". Kjo mund�si �sht� e p�rdorshme
    n�se ju dini sakt�sisht� cilat pako duhet t� instalohen ose n�se
    d�shironi t� posedoni nj� kontrol totale gjat� instaimit.
    
    N�se ju keni vazhduar me instalim n� mod� "%s", ju mund ti �zgjedhni
    t� gjitha grupet q� ti shmangeni instalimit t� programeve t� reja. Kjo
    mund�si �sht� tejet e p�rdorshme p�r restaurimin e sistemit t� d�mtuar.

en: Accept user
sq: Pranoje p�rdoruesin

en: Left Shift key
sq: Kopsa Shift e Majt�

en:  local network
sq:  rrjeti lokal

en: Bad choice, try again
sq: Zgjedhje e gabuar, provoni edhe nj� her�

en: Syslog reports to console 12
sq: Raporti Syslog n� konsol�n 12

en: Search new servers
sq: Hulumtim p�r serverave t� rinj

en: Heard and McDonald Islands
sq: Ishujt Heard dhe McDonald

en: No alternative driver
sq: Asnj� pilot alternativ

en: Toggle to expert mode
sq: Kalo n� mod� expert

en: (on this machine)
sq: (mbi k�t� makin�)

en: Gateway address should be in format 1.2.3.4
sq: Adresa e Port�s hyr�se Gateway duhe t� jet� sikur 1.2.3.4

en: "%s" based winmodem detected, do you want to install needed software ?
sq: "%s" winmodem me baz� t� identifikuar, a d�shironi ta instaloni softverin e nevojsh�m ?

en: Looking at packages already installed...
sq: K�rkimi i pakove veqse t� instaluara...

en: Use Differential Backups
sq: P�rdori Regjsitrimet e Ndryshme

en: Driver
sq: Pilot

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
sq: Linuxconf i kryen disa pika n� nisje, q� m� n� fund ai posedon nj�
    mund�si p�r mir�mbajen e sistemit t� konfiguruar me par�.

en: DVD-R device
sq: periferiku DVDR

en: Printer on remote lpd server
sq: Stampuesi n� server t� larg�t lpd

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
sq: Para se ta instaloni ndonji polis� t� karakterve, sigurohuni se ju posedoni t� drejt� p�rdormi t� tyre q� ti instaloni n� sistemin tuaj.
    
    -Ju mund ti instaloni polisat me nj� rrug� t� p�rditshme. N� raste t� rralla polisat e l�vizura mund ta blokojn� serverin tuaj paraqit�s X.

en: Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to
    boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly
    detected and installed in the bootloader menu. If this is not the case, you
    can add an entry by hand in this screen. Be careful to choose the correct
    parameters.
    
    Yaboot's main options are:
    
     * Init Message: a simple text message displayed before the boot prompt.
    
     * Boot Device: indicates where you want to place the information required
    to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
    to hold this information.
    
     * Open Firmware Delay: unlike LILO, there are two delays available with
    yaboot. The first delay is measured in seconds and at this point, you can
    choose between CD, OF boot, MacOS or Linux;
    
     * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
    After selecting Linux, you will have this delay in 0.1 second increments
    before your default kernel description is selected;
    
     * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
    at the first boot prompt.
    
     * Enable OF Boot?: checking this option allows you to choose ``N'' for
    Open Firmware at the first boot prompt.
    
     * Default OS: you can select which OS will boot by default when the Open
    Firmware Delay expires.
sq: Yaboot �sht� program p�r nisje t� udh�zuar n� MacIntosh. �sht� e mundur q�
    t� niset n� GNU/Linux, MacOS, apo MacOSX n�se �sht� prezent n� kompjuterin
    tuaj. Normalisht sistemet eksploatuese prezente, duhet t� jen� t� zbuluar
    n� fillim. N�se nuk jan� detektuar menj�her�, ju mund ti shtoni n� menyr�
    manuele, hyrjet munguese n� k�t� ekran. Keni kujdes dhe zgjidhni parametrat
    e sakt�.
    
    Opcionet kryesore t� Yaboot jan�: 
    
     * Lajmi Hyr�s: nj� lajm� i thjesht� do t� paraqitet para se niset.
    
     * Mjeti Boot: p�rcaktoni se ku d�shironi ta instaloni programin boot.
    Zakonisht, ju duhet t� keni konfiguruar m� heret nj� ndarje me nisje bootstrap
    p�r ti p�rmbajtur t� gjitha informacionet.
    
     * Koh�zgjatja e Open Firmware: n� ndryshim me LILO, jan� dy koh�zgjatje
    n� disponibilitet, me Yaboot. Koh�zgjatja e par� llogaritet me
    sekunda, ju mund t� zgjedhni mec CD, OF, MacOS dhe Linux;
    
     * Koh�zgjatja e Nisjes s� B�rtham�s: kjo koh�zgjatje �sht� e
    nj�jt� sikur LILO. Mbasi q� ta zgjedhni Linux, ju do ta keni t� nj�jt�n
    koh�zgjatje (n� dhjet�shin e sekondave) para se t� pranoni parametrat e
    b�rtam�s me marr�veshje;
    
     * Autorizo Nisjen nga CD(ja): n�se ju e aktivizoni k�t� mund�si, ju mund ta
    zgjedhni ``C'' p�r CD-n�, n� mik�pritjen e par� n� boot.
    
     * Autorizo Nisjen nga OF: n�se ju e aktivizoni k�t� mund�si, ju mund ta
    zgjedhni ``N'', p�r Open Firmware n� mik�pritje t� par� n� boot.
    
     * OS me Marr�veshje: ju mund t� zgjedhni se cili sistem duhet t� niset me
    marr�veshje, mbasi q� t� p�rfundoj koh�zgjatja e Open Firmware.

en: Wednesday
sq: e m�rkur�

en: Germany
sq: Gjermania

en: No mouse
sq: Asnj� min

en: Choose your CD/DVD media size (MB)
sq: Zgjedheni CD/DVD tuaj dhe madh�sin� e burimit (Mb)

en: Check permissions of files in the users' home
sq: Verifikoji lejimet e skedareve n� p�rdoruesit' home

en: Run "sndconfig" after installation to configure your sound card
sq: Nise "sndconfig" mbas� instalimit p�r ta konfiguruar kart�l�n e z�rit

en: Collapse Tree
sq: Zvog�loje Drurin Gjinealogjik

en: Auto Install Configurator
sq: Konfigurues i Instalimit Automatik

en: Configure networking
sq: Konfigurim i rrjetin

en: Where do you want to install the bootloader?
sq: Ku d�shironi t� instaloni programin bootloader?

en: Your choice of preferred language will affect the language of the
    documentation, the installer and the system in general. Select first the
    region you are located in, and then the language you speak.
    
    Clicking on the "%s" button will allow you to select other languages to
    be installed on your workstation, thereby installing the language-specific
    files for system documentation and applications. For example, if you will
    host users from Spain on your machine, select English as the default
    language in the tree view and "%s" in the Advanced section.
    
    Note that you're not limited to choosing a single additional language. You
    may choose several ones, or even install them all by selecting the "%s"
    box. Selecting support for a language means translations, fonts, spell
    checkers, etc. for that language will be installed. Additionally, the
    "%s" checkbox allows you to force the system to use unicode (UTF-8). Note
    however that this is an experimental feature. If you select different
    languages requiring different encoding the unicode support will be
    installed anyway.
    
    To switch between the various languages installed on the system, you can
    launch the "/usr/sbin/localedrake" command as "root" to change the
    language used by the entire system. Running the command as a regular user
    will only change the language settings for that particular user.
sq: Etapa e par� �sht� q� ta zgjedhni gjuh�n tuaj t� preferuar. Zgjedheni gjuh�n
    tuaj t� preferuar, e cila do t� p�rdoret gjat� instalimit t� sistemit.
    
    Duke klikuar mbi kops�n "%s", programi do t� ju propozoj njashtu
    edhe gjuh� tjera t� cilat mund t� instalohen n� stacionin tuaj punues. Duke
    zgjedhur nj� gjuh� tjet�r, programi do t� instaloj t�r� dokumentacionin
    dhe aplikacionet e nevojshme p�r p�rdorimin e k�saj gjuhe. P�r shembull,
    n�se ju mendoni t� pranoni p�rdorues Spanjol n� serverin tuaj, zgjedheni
    Anglisht�n si gjuh� kryesore, dhe n� sekcionin e vazhduesh�m, klikoni mbi
    kutin� e cila i p�rket� "%s".
    
    Sh�nim, ju keni mund�si t� instalohen shum� gjuh� n� sistem. Mbasi q� keni
    zgjedhur �far�do llogarije lokale, apo klikoni mbi kops�n "%s" p�r
    t� zgjedhur kutin�. Zgjedhja e p�rkrahjeve t� gjuh�ve d.m.th. p�rkthimet
    e polis�s, verifikimet e t� shprehurit, etj. p�r at� gjuh� do t� instalohet
    P�rmbledhja e "%s" kutia verifikuese mund�son forcimin e p�rdorimit t�
    unikodit (UTF-8). Sh�nim edhe pse ky �sht� nj� p�rpar�si p�r t� ardhm�n.
    N�se ju e zgjedhni nj� gjuh� duke marr� p�rsip�r me p�rkrahje unikod q� do
    t� instalohet.
    
    P�r t� kaluar nga nj� gjuh� n� nj� tjet�r, ju mund ta ngarkoni urdh�rin�
    "/usr/sbin/localedrake" me p�rpar�si administratori "root" p�r t�
    nd�rruar t�r� sistemin e gjuh�s, apo secili p�dorues p�r vet� vehten
    mund ta nd�rroj gjuh�n me marr�veshje.

en: The %s is not supported by this version of Mandrake Linux.
sq: %s nuk p�rkrahet nga ky version i Mandrake Linux.

en: DHCP client
sq: Klienti DHCP

en: List users on display managers (kdm and gdm)
sq: Paraqite list�n s� p�rdoruesve n� sistem administrues (kdm dhe gdm)

en: Logitech Mouse (serial, old C7 type)
sq: Logitech Mouse (serik, tip i vjet�r C7)

en: Restoring from file %s failed: %s
sq: Rregullimi nga skedarja %s d�shtoi: %s

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
sq: Tabela e ndarjes s� %s nuk mud t� lexohet sepse �sht� tejet e d�mtuar.
    Dhe �sht� e mundur q� t� zhduken ndarjet e d�mtuara, (T� GJITHA T� DH�NAT DO T� HUMBEN!)
    Zgjidhja tjet�r �sht� mos lejimi i DrakX-it ta ndryshoj� tabel�n e ndarjeve.
    (gabimi �sht� %s)
    
    A pajtoheni q� ti humbni t� gjitha ndarjet�?

en: Are you sure that you want to set up printing on this machine?
sq: A jeni i sigurt, ta p�rfundoni stampimin mbi k�t� makin�?

en: New devfs device
sq: Periferiku i ri devfs

en: ERROR: Cannot spawn %s.
sq: GABIM: Nuk mund ta nis� %s.

en: Boot Style Configuration
sq: Konfigurimi i Stilit t� nisjes

en: Automatic time synchronization
sq: Sinkronizimi automatik i or�s

en: Backup files not found at %s.
sq: Skedaret e regjistruara nuk gjinden n� %s.

en: Armenian (phonetic)
sq: Armenishte (fonetic)

en: Card model:
sq: Model i kartel�s:

en: Thin Client
sq: Klienti DHCP

en: Thank you for choosing Mandrake Linux 9.2
sq: Faleminderit p�r zgjedhjen tuaj t� Mandrake Linux 9.2

en: Start Server
sq: Nise Serverin

en: Turkmenistan
sq: Turkmenistani

en: All remote machines
sq: T� gjitha makinat e larg�ta

en: Install themes
sq: Intalimi i temave

en: Espanol
sq: Spanjol

en: Preparing installation
sq: Pregatitje p�r instalim

en: Edit selected host/network
sq: Botoje t� zgjedhurin ftus/rrjet

en: Add User -->
sq: Shto nj� P�rdorues -->

en: Nauru
sq: Nauri

en: True Type fonts installation
sq: Instalimi i polisave True Type

en: Auto-detect printers connected directly to the local network
sq: Zbulo automatikisht stampuesit e lidhur direkt n� rrejtin lokal

en: LAN configuration
sq: Konfigurimi LAN (rrjet lokal)

en: hard disk model
sq: modeli i diskut t� fort (hard disk)

en: You can't use a LVM Logical Volume for mount point %s
sq: Ju nuk mund t� p�rdorni nj� ndarje logjike LVM p�r nj� pik� montuese %s

en: Get Windows Fonts
sq: Pranoi Polisat Windows

en: Mouse Systems
sq: Sistemet e Minj�ve

en: Iranian
sq: Iranisht

en: Croatia
sq: Kroacia

en: Gateway:
sq: Port� hyr�se:

en: Add server
sq: Shtoje nj� server

en: Remote printer name
sq: Emri i stampuesit t� larg�t

en: MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together  in order to highly reduce hacking risks.
sq: MandrakeSoft �sht� i p�rcaktuar p�r krijimin e veglave m� t� mira p�r sigurimin eversionit Linux sikur: Draksec, nj� sistem me veg�l administrimi t� siguris�, dhe me nj� mur� t� zjarrt� (firewall) �sht� i bashkangjitur n� t�, n� urdh�r q� t� zvog�loj rreziqet nga dep�rtimet (hacking)

en: Device:
sq: Periferik:

en: License agreement
sq: Licenca e pajtueshm�ris�

en: System Options
sq: Opcionet e Sistemit

en: Please choose the desired security level
sq: Ju lutemi zgjedheni nivelin e siguris� q� ju p�lqen

en: This host is already in the list, it cannot be added again.
sq: Ky ftues gjindet ve�se n� list�, dhe nuk mund t� shtohet p�rs�ri.

en: , USB printer
sq: , stampues USB

en: Unable to properly close mkbootdisk:
    
    <span foreground="Red"><tt>%s</tt></span>
sq: Nuk mund ta mbyll� si duhet mkbootdisk:
    
    <span foreground="Kuq"><tt>%s</tt></span>

en: Incremental backups only save files that have changed or are new since the last backup.
sq: Backup-et nj�ra pas tjetr�s, regjistrojn vet�m skedaret e ndryshuara apo ato q� jan� regjistruar m� von�.

en: Choose the applications that will support the fonts:
sq: Zgjedhni aplikacionet q� i p�rkrahin k�to polisa:

en: Configure X
sq: Konfigurim i X

en: Turkish (traditional "F" model)
sq: Turke (model tradicionel "F")

en: Congratulations!
sq: Urime!

en: Use owner id for execution
sq: P�rdore identitetin e pronarit p�r ekzekutim

en: Allow remote root login
sq: Mund�son lidhje root t� larg�t

en: Down
sq: Posht�

en: Raw printer (No driver)
sq: Stampues me hyrje direkte (pa pilot�)

en: Install rpm
sq: Instaloje rpm

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
sq: P�r t� stampuar nj� skedare nga linja komanduese (dritare terminali), ju mund ta p�rdorni urdh�rin "%s <skedare" apo p�rdoruesin e stampimit grafik: "xpp <skedare>" ose "kprinter <skedare>". P�rdoruesit grafik ju mund�sojn� zgjedhjen e nj� stampuesi dhe ti ndryshoni parametrat e stampimit shum� m� leht�.

en: Time remaining
sq: Koha e mbetur

en: UK keyboard
sq: tastier� Angleze

en: Unmount
sq: Demonto

en: Uninstall Fonts
sq: Dezinstaloi Polisat

en: German (no dead keys)
sq: Gjermanishte (pa �el�sa t� vdekur)

en: 	Send mail to %s
sq: 	D�rgoje nj� mail tek %s

en: Transferring %s...
sq: Transferimi i %s...

en: 32 thousand colors (15 bits)
sq: 32 mij� ngjyra (15 bits)

en: You can export using NFS or Samba. Please select which you'd like to use.
sq: A d�shironi ti trasportoni me NFS (protokol UNIX) apo Samba (protokol Windows). Ju lutemi zgjedheni cil�n d�shironi ta p�rdorni.

en: Reboot
sq: Rinise (riboot)

en: Mandrake Control Center
sq: Qendra Kontrolluese Mandrake

en: Multi-function device
sq: Periferik multi-funksional

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
sq: Ju mund t� futni porta t� ndryshme. 
    Shembujt� e pranuesh�m jan�: 139/tcp 139/udp.
    Vini re n� /etc/services p�r m� shum� infomacione.

en: 	-Tape
sq: 	-Kaseta

en: No browser is installed on your system, Please install one if you want to browse the help system
sq: Asnj� shfletues i instaluar n� sistemin tuaj. Ju lutemi instalone nj� n�se d�shironi t� lundroni (browse) n� sistemin ndihmues

en: Remember this password
sq: Kujtoje k�t� parull�

en: Internet Connection Sharing is now enabled.
sq: Shp�rndarja e lidhjes Internet �sht� aktivizuar.

en: 	-Network by SSH.
sq: 	-Rrjeti nga SSH.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
sq:  N�se stampuesi i d�shiruar �sht� zbuluar automatikisht, zgjedheni nga lista, dhe shtone nj� em�r t� p�rdoruesit, parull�n e grupit punues n�se �sht� e nevojshme.

en:  cable
sq:  kablo

en: Use the free space on the Windows partition
sq: P�rdore hap�sir�n e lir� n� ndarjen Windows

en: %s found on %s, configure it automatically?
sq: %s i gjetur n� %s, konfiguroje at� automatikisht?

en: XFree86 driver: %s
sq: Pilot XFree86: %s

en: This host/network is already in the list, it cannot be added again.
sq: Ky ftues/rrjeti gjindet n� list�, dhe nuk mund t� shtohet p�rs�ri.

en: Choose the packages you want to install
sq: Zgjedhi pakot t� cilat d�shironi t'instaloni

en: Papua New Guinea
sq: Papuea e Re Guiniziane

en: Multi-function device on a parallel port
sq: Periferik multi-funksionel n� port�n paralele

en: Serbian (cyrillic)
sq: Serbe (qirilic�)

en: Enter the directory where backups are stored
sq: Futni repertorin, n� t� cilin regjistrimet jan� vendosur

en: Make kernel message quiet by default
sq: Krijo nj� lajm� t� b�rtham�s sikur me marr�veshje

en: Do you want to set this printer ("%s")
    as the default printer?
sq: A d�shironi ta rregulloni k�t� stampues ("%s")
    si stampues me marr�veshje?

en: The DHCP end range
sq: Kufiri p�rfundues n� DHCP

en: Creating bootdisk...
sq: Krijimi i nj� diskete boot...

en: Wait please, testing your connection...
sq: Nj� moment ju lutemi, testimi i lidhjes suaj...

en: Bringing down the network
sq: Ndalja e rrjetit (network)

en: Login ID
sq: Identiteti i Lidhjes (Login)

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
sq: NFS �sht� nj� protokol i popullarizuar p�r shp�rndarjen e skedareve duke
    kaluar rrjetin TCP/IP. Ky servis mund�son mbylljen e serverit NFS.

en: DHCP Client
sq: Klienti DHCP

en: dismiss
sq: mos vepro

en: Printing/Scanning on "%s"
sq: Stampimi/Skanimi n� "%s"

en: omit raid modules
sq: mos i merr� parasysh modulet raid

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
sq: lpd �sht� server p�r stampues q� p�rdoret n� funksionimin e urdh�rit lpr.
    Mund�son qeverisjen e skedareve t� radhitura n� vij�n p�r stampim n� stampuesin e caktuar.

en: Irish
sq: Irlandeze

en: Sunday
sq: e diel

en: Internet Connection Configuration
sq: Konfigurimi i Lidhjes Internet

en: comma separated numbers
sq: numra t� ndar� me presje

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
sq: Mbasi q� ta zgjedhni nj� mjet, ju keni mund�si ti shiqoni zonat e shpjegimeve t� paraqitura n� kall�pin e caktuar ("Informacion")

en: Move selected rule up one level
sq: Hype rregull�n p�r nj� nivel m� lart�

en: The following scanner
    
    %s
    is available on your system.
sq: Skaneri i radhitur
    
    %s
    �sht� lidhur direkt n� sistemin tuaj

en: Do you really want to remove the printer "%s"?
sq: A me t� v�rtet d�shironi ta t�rhiqni stampuesin "%s"?

en: I can't find any room for installing
sq: Nuk mund t� gjej� vend t� mjaftuesh�m p�r ta instaluar

en: Default printer
sq: Stampues me marr�vshje

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
sq: Ju i keni konfiguruar shum� m�nyra lidh�se n� Internet.
    Zgjedheni nj�rin q� d�shironi ta p�rdorni.

en: Modify RAID
sq: Ndryshoje RAID

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
sq: Nj� kartel� PCI e ISDN �sht� gjetur, mir�po nuk e njof� tipin e saj. Ju lutemi zgjedheni nj� kartel� PCI n� ekranin e ardhsh�m.

en: Add user
sq: Shto nj� p�rdorues

en: RAID-disks %s
sq: Disqet RAID %s

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
sq: Ju lutemi futni emrin e interfacit lidh�s p�r internet.
    
    Shembujt:
    		ppp+ p�r modem apo lidhje DSL, 
    		eth0, ose ma kablo lidh�se eth1, 
    		ippp+ p�r nj� lidhje isdn.

en: Choose your keyboard
sq: Zgjedheni tastier�n tuaj

en: Format partitions
sq: Formatim i ndarjeve

en: Automatic correction of CUPS configuration
sq: Korigjues automatik i konfigurimit CUPS

en: Running "%s" ...
sq: Nisja e "%s" ...

en: enable radio support
sq: aktivizoje p�rkrahjen radio

en:         - Per client /etc/X11/XF86Config-4\$\$IP-ADDRESS\$\$:
            		Through clusternfs, each diskless client can have its own unique configuration files
            		on the root filesystem of the server. By allowing local client hardware configuration, 
            		drakTermServ will help create these files.
sq:         - P�r secilin klient /etc/X11/XF86Config-4\$\$IP-ADDRESS\$\$:
            		N�p�r clusternfs, secili klient me disk t� vog�l mund t� posedoj nj� konfigurim t� veqant� n� skedare dhe
            		n� sistemin e skedareve root n� server. N� t� ardhm�n drakTermServ do t� ndihmoj� n� krijimin e k�tyre
            		skedareve.

en: Scanner sharing to hosts:
sq: Shp�rndarja e skanerit n� ftuesit:

en: Loopback file name: %s
sq: Emri i skedares loopback: %s

en: Please choose the printer to which the print jobs should go.
sq: Ju lutemi zgjedheni stampuesin n� t� cil�n do t� shtypet punimi (job).

en: Do not transfer printers
sq: Mos i transfero stampuesit

en: Delay before booting the default image
sq: Afati para se t� niset me udh�zim (boot) imazhi me marr�veshje

en: 
     Copyright (C) 2001-2002 by MandrakeSoft 
         DUPONT Sebastien (original version)
         CHAUMETTE Damien <dchaumette\@mandrakesoft.com>
    
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
    
     Thanks:
        -  pfm2afm:   
    	 by Ken Borgendale:
    	    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
        -  type1inst:
    	 by James Macnicol: 
    	    type1inst generates files fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
                 Convert ttf font files to afm and pfb fonts
sq: 
     E Drejt� Autori (C) 2001-2002 nga MandrakeSoft 
         DUPONT Sebastien sdupont\@mandrakesoft.com
         CHAUMETTE Damien dchaumette\@mandrakesoft.com
    
     Ky program �sht� gratis; ju mund ta shp�rndani at�/ose ta ndryshoni
     nd�r termet e GNU General Public License t� publikuar nga
     Free Software Foundation; dhe versioni 2, ose (simbas mund�sive tuaja)
     nga nj� version m� i ri.
    
     Ky program shp�rndahet me shpres� se do t� jet� i p�rdorsh�m,
     mir�po PA KURR�FAR GARANTIE; dhe pa garanti implicite t� k�tij
     PRODUKTI, apo me P�RSHTATJE T� NJ� Q�LLIMI SPECIFIK. Shiqo n�
     Licenc�n GNU General Public p�r m� shum� detaje.
    
     Ju duhet ta keni pranuar nj� kopje t� GNU General Public License
     n� t� nj�jt�n koh� me k�t� program; n�se jo, na shkruani n� Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
    
     Faleminderime:
        -  pfm2afm:   
    	 nga Ken Borgendale:
    	    Sh�nd�rroje n� Windows skedaren .pfm n� .afm (Adobe Font Metrics)
        -  type1inst:
    	 nga James Macnicol: 
    	    type1inst prodhues i skedareve fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	  nga Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
                 Sh�nd�rroi polisat e skedareve ttf n� afm dhe n� polisat pfb

en: Use Hard Disk to backup
sq: P�rdore Diskun e Fort� p�r ta regjistruar

en: Configure
sq: Konfiguroje

en: Warning, another Internet connection has been detected, maybe using your network
sq: Kujdes, nj� lidhje tjet�r n� Internet �sht� zbuluar, ndoshta rrjeti juaj e p�dore at�

en: Backup Users
sq: Regjistroi P�rdoruesit

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
sq: Ju lutemi, futni emrin ftues.
    Emri i ftuesit duhet t� jet� i kualifukuar p�r shembull:
    `mybox.mylab.myco.com''.
    Ju njashtu mund ta futni adres�n e port�s IP n�se posedoni nj�

en: Select Printer Spooler
sq: Zgjedheni qeveris�sin e stampuesit

en: Create new theme
sq: Krijo tem� t� re

en: Mandrake Tools Explanation
sq: Shpjegimet e Veglave Mandrake

en: No image found
sq: Asnj� imazh i gjetur

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
sq: Disa pako me r�nd�si nuk jan� instalur n� m�nyr� korrekte.
    �sht� e mundur q� cdrom-i apo lexuesi cdrom t� jet� n� defekt.
    Verifikoni cdrom-in n� nj� kompjuter t� instalur, duke shtypur urdh�rin "rpm -qpl Mandrake/RPMS/*.rpm"

en: Mandrake Linux 9.2: the ultimate development platform
sq: Mandrake Linux 9.2: �sht� nj� plate-form� e zgjedhur p�r zhvillim

en: Detected model: %s
sq: Modeli i zbuluar: %s

en: "%s" is not a valid email!
sq: "%s" nuk �sht� e-mail i vlefsh�m!

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
sq: X11 Mund�son Paraqitjen e Administratuesit me lidhje grafike
    n� sistemin tuaj, me Dritare X t� Sistemit me nisje normale dhe nisje t� p�rkrahur
    q� p�rmban� disa sesione t� ndryshme X, n� makin�n tuaj lokale n� t� nj�jt�n koh�.

en: if set to yes, run the daily security checks.
sq: n�se konfigurohet me po, nisi p�r gjdo dit� verifikimet e siguris�.

en: Azerbaijan
sq: Azerbejgjani

en: Device name to use for backup
sq: Emrin e mjetit q� p�rdoret p�r backup

en: No tape in %s!
sq: Asnj� kaset� n� %s!

en:  --doc <link>          - link to another web page ( for WM welcome frontend)
sq:  --doc <link>          - lidhje n� paqe tjet�r web ( interfac WM p�r mir� se ardhje)

en: Dvorak (US)
sq: Dvorak (SHBA)

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
sq: ky �sht� nj� bus fizik� mbi t� cilin periferiku �sht� i lidhur (p.sh.: PCI, USB, ...

en: How is the printer connected?
sq: Si �sht� i lidhur stampuesi?

en: Security level
sq: Nivel sigurie

en: final resolution
sq: vendosm�ria finale

en: Services
sq: Serviset

en: Office Workstation
sq: Stacioni Punues n� Tryez�

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
sq: Programe p�r tryez�: trajtues t� teksteve (kword, abiword), tablues (kspread, gnumeric), �faq�s pdf, etj.

en: Game station
sq: Stacion Loj�rash

en: Amusement programs: arcade, boards, strategy, etc
sq: Programe ahengi: loj� arkade, loj� me stenda, strategji, etj

en: Multimedia station
sq: Stacion Multimedia

en: Sound and video playing/editing programs
sq: Programe p�r loj�ra/botime t� z�rit dhe videos

en: Internet station
sq: Stacion Interneti

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
sq: P�rgjith�sia a veglave t� leximit, d�rgimit t� letrave elektronike t� lajmeve (pine, mutt, tin...) dhe p�r t� lundruar n� internet.

en: Network Computer (client)
sq: Kompjuter Rrjeti (klient)

en: Clients for different protocols including ssh
sq: Klient p�r protokole t� ndryshme me p�rfshirje n� ssh

en: Configuration
sq: Konfigurimi

en: Tools to ease the configuration of your computer
sq: Vegla p�r t� konfiguruar kompjuterin tuaj

en: Scientific Workstation
sq: Stacioni Punues Shkencor

en: Scientific applications such as gnuplot
sq: Aplikacion shkencor sikur gnuplot

en: Console Tools
sq: Vegla n� konsol�

en: Editors, shells, file tools, terminals
sq: Botues, interpretues, vegla skedaresh, terminale

en: KDE Workstation
sq: Stacioni punues KDE

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
sq: Mjedisi i Tryez�s K, dhe grafiku basic, i mjedisit me koleksionimin e veglave

en: Gnome Workstation
sq: Stacioni punues Gnome

en: A graphical environment with user-friendly set of applications and desktop tools
sq: Nj� mjedis grafik� me p�rdorues-miq�sie, nj� p�rgjith�si e palikacioneve dhe vegla n� tryez�

en: Other Graphical Desktops
sq: Mjedise t� Tjera Grafike n� Tryez�

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
sq: Icewm, Window Maker, Enlightenment, Fvwm, etj.

en: C and C++ development libraries, programs and include files
sq: Bibloteka nd�rtuese e C dhe C++, programe dhe skedare me p�rfshirje

en: Documentation
sq: Dokumentacioni

en: Books and Howto's on Linux and Free Software
sq: Libra dhe Howto's p�r Linux dhe Softver gratis

en: Linux Standard Base. Third party applications support
sq: Baz� Standarde e Linux. P�rkrah� aplikacione t� pjes�s s� tret�

en: Postfix mail server
sq: Server i letrave (mail) Postfix

en: Database
sq: Baz� e t� dh�nave

en: PostgreSQL or MySQL database server
sq: Server PostgreSQL apo MySQL i baz�s s� t� dh�nave

en: Firewall/Router
sq: Mur�-i-Zjarrt�/Router

en: Internet gateway
sq: Port� kaluese Interneti

en: Domain Name and Network Information Server
sq: Server i Emrit (DNS) dhe Server i Informacionit (NIS)

en: Network Computer server
sq: Server Kompjuter Rrjeti

en: NFS server, SMB server, Proxy server, ssh server
sq: Server NFS, server SMB, server Proxy, server ssh

en: Set of tools to read and send mail and news and to browse the Web
sq: P�rgjith�sia a veglave p�r leximin, d�rgimin e letrave elektronike dhe shfletimin e Webit.
