DrakX-bs - en to bs translation catalogue (2725 entries)

en: Scanning partitions to find mount points
bs: Pretražujem particije da nađem tačke montiranja

en: if set to yes, check additions/removals of suid root files.
bs: ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka.

en: %s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...
bs: %s: %s zahtijeva ime računara, MAC adresu, IP adresu, nbi-image, 0/1 za THIN_CLIENT, 0/1 za Local Config...

en: Configuration changed - restart clusternfs/dhcpd?
bs: Konfiguracija je promijenjena - da restartujem clusternfs/dhcpd?

en: 		Erase=%s
bs: 		Obriši=%s

en: Differential backups only save files that have changed or are new since the original 'base' backup.
bs: Diferencijalni backupi snimaju samo datoteke koje su promijenjene nakon originalnog 'baznog' backupa.

en: network printer port
bs: port mrežnog štampača

en: Please insert floppy disk:
bs: Molim ubacite disketu:

en: The backup partition table has not the same size
    Still continue?
bs: Backup tabela particija nema istu veličinu
    Ipak nastavljate?

en: Which username
bs: Koje korisničko ime

en: Which type of entry do you want to add?
bs: Koju vrstu opcije želite dodati?

en: Restore partition table
bs: Vrati tabelu particija

en: Configure hostname...
bs: Podesi ime računara...

en: On CUPS server "%s"
bs: Na CUPS serveru "%s"

en: Post-install configuration
bs: Post-instalacijsko podešavanje

en: The current security level is %s
    Select permissions to see/edit
bs: Trenutni nivo sigurnisti je %s
    Izaberite koje privilegije želite vidjeti/izmijeniti

en: Use ``%s'' instead
bs: Koristi ``%s'' umjesto toga

en: Type
bs: Tip

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
bs: 
    Također štampači konfigurisani sa PPD datotekama koje su osigurali njihovi proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni.

en: Sri Lanka
bs: Šri Lanka

en: The following printer
    
    %s%s
    are directly connected to your system
bs: Sljedeći štampač
    
    %s%s
    su direktno spojeni na vaš sistem

en: Central African Republic
bs: Centralnoafrička Republika

en: Gateway device
bs: Gateway uređaj

en: Advanced preferences
bs: Napredne opcije

en: Ethernetcard
bs: Ethernet kartica

en: If set, send the mail report to this email address else send it to root
bs: Ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje root-u

en: Parameters
bs: Parametri

en: no
bs: ne

en: Auto-detect
bs: Auto prepoznavanje

en: Interface:
bs: Interfejs:

en: Select installation class
bs: Izaberite klasu instalacije

en: The system doesn't seem to be connected to the Internet.
    Try to reconfigure your connection.
bs: Izgleda da sistem nije spojen na Internet.
    Probajte promijeniti postavke vaše konekcije.

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
bs: Povezati štampač na Linux server i dopustiti Windows računarima da se spajaju na njega kao klijenti.
    
    Da li zaista želite nastaviti sa podešavanjem štampača kako ste započeli?

en: Belarus
bs: Bjelorusija

en: Error writing to file %s
bs: Greška u pisanju datoteke: %s

en: Report check result to syslog
bs: Prijavi rezultate provjere u syslog

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
bs: Apmd se koristi za nadgledanje statusa baterija i njegovo bilježenje preko
    sysloga. Takođe se može koristiti za gašenje računara kada su baterije pri kraju.

en: Use tape to backup
bs: Koristi traku za backup

en: The following packages are going to be installed
bs: Sljedeći paketi će biti instalirani

en: CUPS configuration
bs: Podešavanje CUPSa

en: Total progress
bs: Ukupno napredak

en: Not enough free space to allocate new partitions
bs: Nema dovoljno slobodnog prostora za pravljenje novih particija

en: Moving
bs: Premještam

en: 
    Drakbackup activities via %s:
bs: 
    Drakbackup aktivnosti putem %s:

en: yes
bs: da

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
bs: Dobro došli u Čarobnjak za podešavanje mreže
    
    Sada ćemo podesiti vašu internet/mrežnu konekciju.
    Ako ne želite da koristite automatsko prepoznavanje, isključite opciju.

en: Lebanon
bs: Liban

en: Edit selected host
bs: Izmijeni izabrani računar

en: No CD device defined!
bs: Nije definisan CD uređaj!

en: 	Use .backupignore files
bs: 	Koristi datoteke .backupignore

en: Bulgarian (phonetic)
bs: Bugarska (fonetska)

en: The DHCP start ip
bs: Početna DHCP adresa

en: Don't rewind tape after backup
bs: Ne premotavaj traku nakon backupa

en: Bootloader main options
bs: Glavne opcije bootloadera

en: Tape
bs: Traka

en: Malaysia
bs: Malezija

en: Scanning network...
bs: Pretražujem mrežu...

en: With this option you will be able to restore any version
     of your /etc directory.
bs: Sa ovom opcijom bićete u mogućnosti da vratite bilo koju
     verziju vašeg /etc direktorija.

en: The change is done, do you want to restart the dm service ?
bs: Izmjena je primijenjena, želite li sada restartovati servis dm?

en: Swiss (French layout)
bs: Švicarska (francuski izgled)

en: mkraid failed (maybe raidtools are missing?)
bs: mkraid nije uspio (možda nedostaju raidtools?)

en: Webcam
bs: Web kamera

en: size of the (second level) cpu cache
bs: veličina CPU keša (drugog nivoa)

en: Soundcard
bs: Zvučna kartica

en: Month
bs: Mjesec

en: Search for files to restore
bs: Izaberite datoteke za vraćanje

en: Luxembourg
bs: Luksemburg

en: To print a file from the command line (terminal window) use the command "%s <file>".
bs: Za štampanje datoteke sa komandne linije (terminalski prozor) koristite komandu "%s <datoteka>".

en: Level %s
bs: Nivo %s

en: Syriac (phonetic)
bs: Sirijska (fonetska)

en: Bus
bs: Sabirnica

en: Iraq
bs: Irak

en: connecting to %s ...
bs: spajam se na %s...

en: Potential LAN address conflict found in current config of %s!
bs: Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!

en: Configuring...
bs: Podešavam...

en: The setup has already been done, and it's currently enabled.
bs: Podešavanje je već završeno i trenutno je uključeno.

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
bs: Za većinu modernih TV kartica, bttv modul Linux kernela automatski prepoznaje odgovarajuće parametre.
    Ako je vaša kartica pogrešno prepoznata, ovdje možete prisiliti odgovarajući tip tunera i kartice. Samo izaberite parametre vaše TV karte.

en: Password (again)
bs: Šifra (ponovo)

en: Search installed fonts
bs: Pretraži instalirane fontove

en: Default desktop
bs: Desktop

en: To submit a bug report, click on the button report.
    This will open  a web browser window on %s
     where you'll find a form to fill in.  The information displayed above will be 
    transferred to that server.
bs: Da prijavite bug, kliknite na dugme Prijavi.
    Ovo će otvoriti prozor web browsera na %s
     gdje ćete pronaći formular koji treba popuniti. Gore prikazane informacije će biti  
    poslane na taj server.

en: Venezuela
bs: Venecuela

en: IP address
bs: IP adresa

en: Choose the sizes
bs: Izaberite veličine

en: List of data corrupted:
bs: Lista oštećenih podataka:

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
bs: Može se montirati samo eksplicitno (tj.,
    opcija -a neće montirati i ovaj sistem).

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
bs: Vaš modem nije podržan pod ovim sistemom.
    Pogledajte http://www.linmodems.org

en: Choose another partition
bs: Izaberi drugu particiju

en: Current user
bs: Trenutni korisnik

en: Username
bs: Korisničko ime

en: Left "Windows" key
bs: Lijeva "Windows" tipka

en: Guyana
bs: Gvajana

en: dhcpd Server Configuration
bs: Podešavanje dhcpd servera

en: Used for directory:
     only owner of directory or file in this directory can delete it
bs: Koristi se za direktorij:
     samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga može obrisati

en:  on Novell server "%s", printer "%s"
bs: na Novell serveru "%s", štampač "%s"

en: Printer Name
bs: Naziv štampača

en: Remove a module
bs: Ukloni modul

en: Password
bs: Šifra

en: Advanced Configuration
bs: Napredno podešavanje

en: Scanning on your HP multi-function device
bs: Skeniram pomoću HP multifunkcijskog uređaja

en: Choose an existing RAID to add to
bs: Izaberite postojeći RAID na koji ćete dodati

en: Turkish (modern "Q" model)
bs: Turska (moderni "Q" model)

en: Lilo message not found
bs: Nisam pronašao Lilo poruku.

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
bs: Automatsko regenerisanje kernel zaglavlja u /boot za
    /usr/include/linux/{autoconf,version}.h

en: if needed
bs: ako je potrebno

en: Restore Failed...
bs: Vraćanje nije uspjelo...

en: /Autodetect _jazz drives
bs: /Automatski prepoznaj _jazz uređaje

en: Store the password for this system in drakbackup configuration.
bs: Zapiši šifru ovog sistema u konfiguraciju DrakBackup-a.

en: Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.
bs: Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu
    provjeru prevedenog teksta, tekst licence je ostavljen u originalnom (engleskom)
    obliku.
    
    
    Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.

en: Default user
bs: Korisnik

en: the progress bar x coordinate
    of its upper left corner
bs: koordinate progresne trake x
    tj. njenog lijevog ugla

en: Current interface configuration
bs: Postavke trenutnog interfejsa

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
bs: 
    Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti ispravne.
    
    Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.

en: Do not print any test page
bs: Nemoj štampati testnu stranicu

en: %s already in use
bs: %s je već u upotrebi

en: Force No APIC
bs: Prinudi bez APICa

en: This password is too short (it must be at least %d characters long)
bs: Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)

en: [keyboard]
bs: [tastatura]

en: Install List
bs: Lista instalacije

en: Change
    Restore Path
bs: Promijeni
    stazu vraćanja

en: Show only for the selected day
bs: Prikaži samo za izabrani dan

en: 	Limit disk usage to %s MB
bs: 	Ograniči upotrebu diska na %s MB

en: Logs
bs: Dnevnici

en: (Note: Parallel ports cannot be auto-detected)
bs: (Napomena: Paralelni portovi ne mogu biti automatski istraženi)

en: What kind of card do you have?
bs: Koju vrstu kartice imate?

en: Security
bs: Sigurnost

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
bs: Možete također koristiti grafički interfejs "xpdq" za podešavanje opcija i upravljanje zadacima štampe.
    Ako koristite KDE okruženje radne površine imate "dugme za paniku". To je ikona na radnoj površini čiji je naziv "ZAUSTAVI štampač!", koja zaustavlja sve zadatke štampe odmah kada kliknete na nju. Ovo je korisno npr. u slučaju zaglavljivanja papira.

en: Unable to find backups to restore...
bs: Ne mogu naći backupe za vraćanje...

en: Unknown
bs: Nepoznat

en: This server is already in the list, it cannot be added again.
bs: Ovaj server je već na listi, ne možete ga ponovo dodati.

en: Network Configuration
bs: Podešavanje mreže

en: Protocol for the rest of the world
    No D-Channel (leased lines)
bs: Protokol za ostatak svijeta 
     bez D-kanala (iznajmljene linije)

en: Option %s must be a number!
bs: Opcija %s mora biti broj!

en: Notice
bs: Napomena

en: You have not configured X. Are you sure you really want this?
bs: Niste podesili X. Sigurno želite uraditi ovo?

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
bs: Podešavanje štampača će raditi potpuno automatski. Ako vaš štampač nije ispravno prepoznat ili ako želite sami podesiti štampač, uključite "Ručno podešavanje".

en: What type of partitioning?
bs: Koju vrstu particioniranja?

en: file list sent by FTP: %s
bs: lista datoteka poslana putem FTPa: %s

en: Interface
bs: Interfejs

en: Multisession CD
bs: Višesesijski CD

en: comma separated strings
bs: tekst razdvojen zarezima

en: These are the machines from which the scanners should be used:
bs: Ovo su računari sa koji treba koristiti skenere:

en: Messages
bs: Poruke

en: Unknown|CPH06X (bt878) [many vendors]
bs: Nepoznat|CPH06X (bt878) [razni proizvođači]

en: POP and IMAP Server
bs: POP i IMAP server

en: Mexico
bs: Meksiko

en: Rwanda
bs: Ruanda

en: Switzerland
bs: Švicarska

en: Brunei Darussalam
bs: Bruneji

en: Do you have any %s interfaces?
bs: Imate li ijedan %s interfejs?

en: You must be root to read configuration file.
bs: Da biste pročitali konfiguracijsku datoteku, morate biti root.

en: Remote lpd Printer Options
bs: Opcije udaljenog lpd štampača

en: GNU/Linux is a multi-user system, meaning each user may have their own
    preferences, their own files and so on. You can read the ``Starter Guide''
    to learn more about multi-user systems. But unlike "root", who is the
    system administrator, the users you add at this point will not be
    authorized to change anything except their own files and their own
    configurations, protecting the system from unintentional or malicious
    changes that impact on the system as a whole. You will have to create at
    least one regular user for yourself -- this is the account which you should
    use for routine, day-to-day use. Although it is very easy to log in as
    "root" to do anything and everything, it may also be very dangerous! A
    very simple mistake could mean that your system will not work any more. If
    you make a serious mistake as a regular user, the worst that will happen is
    that you will lose some information, but not affect the entire system.
    
    The first field asks you for a real name. Of course, this is not mandatory
    -- you can actually enter whatever you like. DrakX will use the first word
    you typed in this field and copy it to the "%s" field, which is the name
    this user will enter to log onto the system. If you like, you may override
    the default and change the username. The next step is to enter a password.
    From a security point of view, a non-privileged (regular) user password is
    not as crucial as the "root" password, but that is no reason to neglect
    it by making it blank or too simple: after all, your files could be the
    ones at risk.
    
    Once you click on "%s", you can add other users. Add a user for each one
    of your friends: your father or your sister, for example. Click "%s" when
    you have finished adding users.
    
    Clicking the "%s" button allows you to change the default "shell" for
    that user (bash by default).
    
    When you have finished adding users, you will be asked to choose a user
    that can automatically log into the system when the computer boots up. If
    you are interested in that feature (and do not care much about local
    security), choose the desired user and window manager, then click "%s".
    If you are not interested in this feature, uncheck the "%s" box.
bs: GNU/Linux je višekorisnički sistem, što znači da svaki korisnik može imati
    vlastite preference, vlastite datoteke i tako dalje. Možete pročitati ''Početnički
    vodič'' da biste saznali više o višekorisničkim sistemima. Ali za razliku od
    "root"-a, koji je administrator sistema, korisnicima koje dodate u ovom trenutku
    neće biti dozvoljeno da promijene ništa osim vlastitih datoteka i vlastite
    konfiguracije, čime je sistem zaštićen od nenamjernih ili zlonamjernih izmjena
    koje mogu uticati na cijeli sistem. Moraćete kreirati najmanje jednog korisnika
    za vas same -- ovo je račun koji trebate koristiti za rutinsku, svakodnevnu
    upotrebu. Iako je vrlo lako prijaviti se kao "root" da biste radili sve i svašta,
    to takođe može biti i vrlo opasno! Jedna greška može značiti da vaš sistem
    više ne radi. Ako napravite ozbiljnu pogrešku kao običan korisnik, najgore
    što se može desiti jeste da izgubite neke informacije, ali ne i da utičete na
    cijeli sistem.
    
    U prvom polju unosite vaše pravo ime i prezime. Naravno, ovo nije obavezno
    -- u stvari možete ovdje unijeti šta god hoćete. DrakX će koristiti prvu riječ
    koju unesete i kopirati je u polje "%s", što je ime koje će ovaj
    korisnik unositi da bi ušao na sistem. Ako želite, možete promijeniti
    ponuđenu vrijednost. Idući korak je da unesete šifru. Sa sigurnosne tačke
    gledišta, šifra neprivilegovanog (običnog) korisnika nije tako važna kao "root"
    šifra, ali to nije razlog da je zanemarite tako što ćete je ostaviti praznom ili
    prejednostavnom: na kraju krajeva, vaše lične datoteke je ono što je u
    riziku.
    
    Jednom kada kliknete na "%s", možete ih dodati još.
    Dodajte po jednog korisnika za svakog od vaših prijatelja: na primjer za
    vašeg oca ili sestru. Kliknite na "%s" kada završite dodavanje korisnika.
    
    Klikanjem na dugme "%s" možete promijeniti osnovni "shell" za tog
    korisnika (ponuđen je bash).
    
    Kada završite dodavanje svih korisnika, bićete upitani da odaberete
    korisnika koji se može automatski prijaviti prilikom pokretanja sistema.
    Ako ste zainteresovani za ovu mogućnost (i ne brinete previše o lokalnoj
    sigurnosti), izaberite željenog korisnika i window manager, zatim kliknite
    na "%s". Ako niste zainteresovani za to, isključite opciju
    "%s".

en: Configure Internet Access...
bs: Podesi Internet pristup...

en: Please choose the time interval between each backup
bs: Izaberite vremenski interval između svakog backupa

en: Norway
bs: Norveška

en: Delete profile
bs: Obriši profil

en: Danish
bs: Danska

en: Automatically switch on numlock key locker under console
    and XFree at boot.
bs: Automatski uključuje numlock pod konzolom i grafičkim okruženjem
    prilikom boota.

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
bs: Molim unesite IP konfiguraciju za ovaj računar.
    Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji
    razdvojenoj tačkama (npr. 1.2.3.4).

en: The Mandrake Linux installation is distributed on several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM so it will eject
    the current CD and ask you to insert the correct CD as required.
bs: Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li je
    neki paket smješten na drugom CDu i on će izbaciti trenutni CD i zamoliti vas
    da ubacite neki drugi po potrebi.

en: When checked, owner and group won't be changed
bs: Kada je uključeno, vlasnik i grupa se ne mogu promijeniti

en: Bulgaria
bs: Bugarska

en: Tuesday
bs: Utorak

en: Processors
bs: Procesori

en: Svalbard and Jan Mayen Islands
bs: Svalbard and Jan Mayen ostrva

en: No NIC selected!
bs: Nije izabran nijedan NIC!

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
bs: Došlo je do problema prilikom podešavanja.
    Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne radi, možete ponovo pokrenuti podešavanje

en: partition %s is now known as %s
bs: particija %s je od sada poznata kao %s

en: Backup Other files...
bs: Backup-uj ostale datoteke...

en: Congo (Kinshasa)
bs: Kongo (Kinshasa)

en: Partition table of drive %s is going to be written to disk!
bs: Tabela particija za uređaj %s će biti zapisana na disk!

en: Installing HPOJ package...
bs: Instaliram HPOJ pakete...

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
bs: Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite
    od bootloader programa. Ovo je korisno ako ne želite instalirati LILO (ili grub) na
    vaš sistem, ako neki drugi operativni sistem uklanja LILO ili ako LILO ne radi
    na vašoj trenutnoj konfiguraciji. Vlastiti bootdisk se može takođe koristiti sa
    Mandrake rescue image, pri čemu je mnogo lakše ispraviti neke ozbiljne
    sistemske kvarove. Želite li napraviti boot disketu za vaš sistem?
    %s

en: 
                          DrakBackup Daemon Report
bs: 
                          DrakBackup Izvještaj o demonima

en: Latvian
bs: Latvijska

en: monthly
bs: mjesečno

en: Module name
bs: Naziv modula

en: Start at boot
bs: Pokreni na bootu

en: Use Incremental Backups
bs: Koristi inkrementalni backup

en: First sector of drive (MBR)
bs: Prvi sektor diska (MBR)

en: Use Unicode by default
bs: Podrazumijeva se Unicode

en: the module of the GNU/Linux kernel that handles the device
bs: modul Linux kernela koji upravlja uređajem

en: Trying to rescue partition table
bs: Pokušavam da spasim tabelu particija

en: Option %s must be an integer number!
bs: Opcija %s mora biti cijeli broj!

en: Use password to authenticate users
bs: Koristi šifru da provjeriš autentičnost korisnika

en: Entries you'll have to fill:
    %s
bs: Stavke koje morate popuniti:
    %s

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
bs: Za backup na druge medije, datoteke će biti napravljene na hard disku, a zatim prebačene na taj medij.  Uključivanjem ove opcije, tar datoteke koje su napravljene na hard disku će biti pobrisane nakon backupa.

en: Unable to start live upgrade !!!
bs: Ne mogu da pokrenem live upgrade !!!

en: Name:
bs: Ime:

en: 16 million colors (24 bits)
bs: 16 miliona boja (24 bita)

en: Allow all users
bs: Dozvoli svim korisnicima

en: The official MandrakeSoft Store
bs: Oficijelna MandrakeSoft prodavnica

en: Resizing
bs: Mijenjam veličinu

en: Enter the maximum size
     allowed for Drakbackup (MB)
bs: Unesite maksimalnu veličinu
     dozvoljenu za Draxbackup (MB)

en: Cable connection
bs: Kablovska konekcija

en: User
bs: Korisnik

en: Do new backup before restore (only for incremental backups.)
bs: Izvrši novi backup prije vraćanja (samo za inkrementalni backup.)

en: Name
bs: Ime

en: mkraid failed
bs: mkraid nije uspio

en: Button 3 Emulation
bs: Emulacija 3 dugmeta

en: Check additions/removals of sgid files
bs: Provjeri dodavanje/brisanje sgid datoteka

en: Sending files...
bs: Šaljem datoteke...

en: Israeli (Phonetic)
bs: Izraelska (fonetska)

en: access to rpm tools
bs: pristup rpm alatima

en: You must choose/enter a printer/device!
bs: Morate izabrati ili unijeti štampač / uređaj!

en: Permission problem accessing CD.
bs: Problem sa privilegijama tokom pristupa na CD.

en: Phone number
bs: Broj telefona

en: Error: The "%s" driver for your sound card is unlisted
bs: Greška: Drajver "%s" za vašu zvučnu karticu nije na listi

en: Printer name, description, location
bs: Naziv štampača, opis, lokacija

en: Use Xinerama extension
bs: Koristi Xinerama ekstenziju

en: West Europe
bs: Zapadna Evropa

en: On CD-R
bs: na CDROMu

en: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - print this help message.
      --report          - program should be one of mandrake tools
      --incident        - program should be one of mandrake tools
bs: [OPTIONS] [PROGRAM_NAME]
    
    OPCIJE:
      --help            - ispisuje ovu pomoć.
      --report          - program treba biti neki od mandrake alata
      --incident        - program treba biti neki od mandrake alata

en: Harddrake2 version %s
bs: Harddrake2 verzija %s

en: Preferences
bs: Opcije

en: Swaziland
bs: Svazilend

en: Dominican Republic
bs: Dominikanska Republika

en: Copying %s
bs: Kopiram %s

en: Choose color
bs: Izaberite boju

en: Syriac
bs: Sirijska

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on this partition
    will be lost and will not be recoverable!
bs: Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu
    Mandrake Linux particiju. Budite pažljivi, svi podaci koji se nalaze na
    njemu će biti izgubljeni i neće se moći vratiti!

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Use the %c and %c keys for selecting which entry is highlighted.
bs: Koristite tipke %c i %c za izbor jedne od opcija.

en: Generic 2 Button Mouse
bs: Opšti miš sa 2 dugmeta

en: Enable "%s" to execute the file
bs: Uključite "%s" da izvršite datoteku

en: Remove the logical volumes first
bs: Najprije ukloni logičke volumene

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: The highlighted entry will be booted automatically in %d seconds.
bs: Osvjetljene stavke će biti bootane automatski za %d sekundi.

en: Can't write /etc/sysconfig/bootsplash
    File not found.
bs: Ne mogu pisati u /etc/sysconfig/bootsplash
    Datoteka nije pronađena.

en: Internet access
bs: Pristup Internetu

en: y coordinate of text box
    in number of characters
bs: y koordinata tekst polja
    u broju znakova

en: To get a list of the options available for the current printer click on the "Print option list" button.
bs: Za listu opcija koje su dostupne za trenutni štampač kliknite na dugme "Lista opcija za štampu".

en: Enabling servers...
bs: Uključujem servere...

en: Printing test page(s)...
bs: Štampam testnu stranicu...

en: There is already a partition with mount point %s
bs: Već postoji particija sa tačkom montiranja %s

en: Enable/Disable msec hourly security check.
bs: Uključi/isključi msec provjeru svakog sata.

en: At this point, you need to decide where you want to install the Mandrake
    Linux operating system on your hard drive. If your hard drive is empty or
    if an existing operating system is using all the available space you will
    have to partition the drive. Basically, partitioning a hard drive consists
    of logically dividing it to create the space needed to install your new
    Mandrake Linux system.
    
    Because the process of partitioning a hard drive is usually irreversible
    and can lead to lost data if there is an existing operating system already
    installed on the drive, partitioning can be intimidating and stressful if
    you are an inexperienced user. Fortunately, DrakX includes a wizard which
    simplifies this process. Before continuing with this step, read through the
    rest of this section and above all, take your time.
    
    Depending on your hard drive configuration, several options are available:
    
     * "%s": this option will perform an automatic partitioning of your blank
    drive(s). If you use this option there will be no further prompts.
    
     * "%s": the wizard has detected one or more existing Linux partitions on
    your hard drive. If you want to use them, choose this option. You will then
    be asked to choose the mount points associated with each of the partitions.
    The legacy mount points are selected by default, and for the most part it's
    a good idea to keep them.
    
     * "%s": if Microsoft Windows is installed on your hard drive and takes
    all the space available on it, you will have to create free space for
    Linux. To do so, you can delete your Microsoft Windows partition and data
    (see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT
    partition. Resizing can be performed without the loss of any data, provided
    you have previously defragmented the Windows partition and that it uses the
    FAT format. Backing up your data is strongly recommended.. Using this
    option is recommended if you want to use both Mandrake Linux and Microsoft
    Windows on the same computer.
    
       Before choosing this option, please understand that after this
    procedure, the size of your Microsoft Windows partition will be smaller
    then when you started. You will have less free space under Microsoft
    Windows to store your data or to install new software.
    
     * "%s": if you want to delete all data and all partitions present on
    your hard drive and replace them with your new Mandrake Linux system,
    choose this option. Be careful, because you will not be able to undo your
    choice after you confirm.
    
       !! If you choose this option, all data on your disk will be deleted. !!
    
     * "%s": this will simply erase everything on the drive and begin fresh,
    partitioning everything from scratch. All data on your disk will be lost.
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "%s": choose this option if you want to manually partition your hard
    drive. Be careful -- it is a powerful but dangerous choice and you can very
    easily lose all your data. That's why this option is really only
    recommended if you have done something like this before and have some
    experience. For more instructions on how to use the DiskDrake utility,
    refer to the ``Managing Your Partitions '' section in the ``Starter
    Guide''.
bs: Na ovom mjestu trebate izabrati gdje želite instalirati Mandrake Linux
    operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći
    operativni sistem koristi sav prostor na njemu, potrebno je da ga
    particionirate. U biti, particioniranje hard diska predstavlja logičko
    organiziranje kako bi se stvorio prostor za instaliranje vašeg novog
    Mandrake Linux sistema.
    
    Pošto su efekti particioniranja obično nepovratni, i mogu voditi do gubitka
    podataka na eventualnom postojećem operativnom sistemu, particioniranje
    može biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji
    čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molim
    pročitajte pažljivo ovaj tekst i, prije svega, nemojte žuriti.
    
    Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko
    mogućnosti:
    
     * "%s": ova opcija vodi na automatsko particioniranje vašeg praznog
    diska (diskova). Ako izaberete ovu opciju, neće biti postavljana
    nikakva daljnja pitanja.
    
     * "%s": čarobnjak je detektovao jednu ili više postojećih
    Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu
    opciju. U tom slučaju, bićete upitani da izaberete tačke montiranja koje
    odgovaraju svakoj od ovih particija. Automatski će biti predložene ranije
    tačke montiranja, i najčešće je pametno zadržati ih.
    
     * "%s": ako je na vašem hard
    disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,
    moraćete napraviti nešto slobodnog prostora za Linux. To možete učiniti
    brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opciju
    ``Obriši čitav disk'' ispod) ili možete promijeniti veličinu vaše Microsoft
    Windows FAT particije. Promjena veličine se može izvršiti bez gubitka
    podataka, pod uslovom da prethodno defragmentirate Windows particiju
    i da ona koristi FAT format. Backupovanje vaših podataka je strogo
    preporučeno. Ova mogućnost je preporučena ako namjeravate koristiti i
    Mandrake Linux i Microsoft Windows na istom računaru.
    
        Prije izbora ove opcije, molim da imate na umu da će, nakon ove
    procedure, veličina vaše Microsoft Windows particije biti manja nego
    trenutno. To znači da će Microsoft Windows prijavljivati da imate manje
    prostora za smještaj podataka ili instaliranje novog softwarea.
    
     * "%s": ako želite da obrišete sve podatke i sve particije koje su
    prisutne na vašem hard disku i umjesto njih postavite vaš novi Mandrake
    Linux sistem, možete izabrati ovu opciju. Budite oprezni sa ovom
    mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.
    
       !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti izgubljeni. !!
    
     * "%s": ovo će jednostavno pobrisati sve na disku i početi od
    početka, particionirajući ga. Svi podaci na vašem disku će biti
    izgubljeni.
    
       !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti izgubljeni. !!
    
     * "%s": ako želite da ručno particionirate vaš hard disk,
    izaberite ovu opciju. Budite oprezni -- to je moćan, ali i opasan izbor. Vrlo
    lako možete izgubiti sve vaše podatke. Zato ovu opciju ne preporučujemo,
    osim ako ste nešto ovakvo već radili i imate nekog iskustva. Više uputstava
    za korištenje DiskDrake alata možete naći u ``Vodiču za početnike'', odjeljak
    ``Upravljanje vašim particijama''.

en: Ukraine
bs: Ukrajina

en: Application:
bs: Aplikacija:

en: External ISDN modem
bs: Vanjski ISDN modem

en: if set to yes, report check result by mail.
bs: ako je postavljeno na da, prijavljuje rezultate provjere mailom.

en: Your choice? (default %s)
bs: Vaš izbor? (podrazumjevano %s)

en: Trouble shooting
bs: Kako ukloniti problem?

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
bs: Testna stranica je poslana štampaču.
    Može potrajati određeno vrijeme dok štampač krene.
    Status štampanja:
    %s

en: daily
bs: dnevno

en: and one unknown printer
bs: i jedan nepoznat štampač

en: Ireland
bs: Irska

en:          Restore Configuration
bs:          Vrati konfiguraciju

en: Is this the correct setting?
bs: Da li je ovo ispravno?

en: You will now set up your Internet/network connection. If you wish to
    connect your computer to the Internet or to a local network, click "%s".
    Mandrake Linux will attempt to autodetect network devices and modems. If
    this detection fails, uncheck the "%s" box. You may also choose not to
    configure the network, or to do it later, in which case clicking the "%s"
    button will take you to the next step.
    
    When configuring your network, the available connections options are:
    traditional modem, ISDN modem, ADSL connection, cable modem, and finally a
    simple LAN connection (Ethernet).
    
    We will not detail each configuration option - just make sure that you have
    all the parameters, such as IP address, default gateway, DNS servers, etc.
    from your Internet Service Provider or system administrator.
    
    You can consult the ``Starter Guide'' chapter about Internet connections
    for details about the configuration, or simply wait until your system is
    installed and use the program described there to configure your connection.
bs: Sada ćete podesiti vašu Internet/mrežnu konekciju. Ako želite spojiti
    vaš računar na Internet ili lokalnu mrežu, kliknite na "%s". Mandrake
    Linux će pokušati prepoznati mrežne uređaje i modeme.
    Ako prepoznavanje ne uspije, isključite opciju "%s".
    Možete takođe izabrati da ne podešavate mrežu ili da to uradite kasnije,
    u kojem slučaju vas klik na dugme "%s" vodi na idući korak.
    
    Kada podešavate mrežu, dostupne opcije su: tradicionalni modem, ISDN
    modem, ADSL konekcija, kablovski modem i konačno obična LAN veza
    (Ethernet).
    
    Nećemo dati detalje o svakoj od konfiguracijskih opcija - samo provjerite
    da li ste dobili sve parametre, kao što je IP adresa, default gateway, DNS
    serveri, itd. od svog Internet Service Providera ili sistemskog administratora.
    
    Možete pogledati poglavlje ''Vodiča za početnike'' o Internet konekcijama
    za detalje o podešavanju, ili jednostavno sačekajte da vaš sistem bude
    instaliran i koristite program koji je tamo opisan za podešavanje vaše veze.

en: Wizard Configuration
bs: Čarobnjak za podešavanje

en: Autoprobe
bs: Ispitivanje

en: if set to yes, check for :
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
bs: ako je postavljeno na da, provjerava:
    
    - prazne šifre,
    
    - nedostatak šifre u /etc/shadow
    
    - korisnike sa id-om 0 koji nisu root.

en: Backup system files...
bs: Backup-uj sistemske datoteke...

en: Can't use broadcast with no NIS domain
bs: Ne mogu koristiti broadcast bez NIS domene

en: Removing printer "%s"...
bs: Uklanjam štampač "%s" ...

en: Shell history size
bs: Veličina historije shell-a

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
bs: Molim navedite gdje se nalazi datoteka auto_install.cfg.
    
    Ostavite ovo praznim ako ne želite podesiti režim automatske instalacije.

en: Configured on other machines
bs: Podešeno na ostalim računarima

en: information level that can be obtained through the cpuid instruction
bs: nivo informacija koje se mogu dobiti cpuid instrukcijom

en:  on device: %s
bs: na uređaju: %s

en: Remove Windows(TM)
bs: Ukloni Windows(TM)

en: Starts the X Font Server (this is mandatory for XFree to run).
bs: Pokreće X Font Server (ovo je nužno da bi XFree radio).

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
bs: Većinu ovih vrijednosti uzimam iz
    vašeg aktivnog sistema.
    Možete ih izmijeniti po potrebi.

en: Select the font file or directory and click on 'Add'
bs: Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'

en: Madagascar
bs: Madagaskar

en: Cron not available yet as non-root
bs: Kron još uvijek nije dostupan kao ne-root

en: System
bs: Sistem

en: Do you want to use this feature?
bs: Da li želite koristiti ovu mogućnost?

en: Arabic
bs: Arapska

en: 
    - Options:
bs: 
    - Opcije:

en: Password required
bs: Potrebna šifra

en: %d minutes
bs: %d minuta

en: Graphics card: %s
bs: Grafička karta: %s

en: WebDAV transfer failed!
bs: WebDAV transfer nije uspio!

en: XFree configuration
bs: XFree konfiguracija

en: Choose action
bs: Izaberi akciju

en: French Polynesia
bs: Francuska Polinezija

en: Usually, DrakX has no problems detecting the number of buttons on your
    mouse. If it does, it assumes you have a two-button mouse and will
    configure it for third-button emulation. The third-button mouse button of a
    two-button mouse can be ``pressed'' by simultaneously clicking the left and
    right mouse buttons. DrakX will automatically know whether your mouse uses
    a PS/2, serial or USB interface.
    
    If for some reason you wish to specify a different type of mouse, select it
    from the list provided.
    
    If you choose a mouse other than the default, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct and that the mouse is working correctly. If the mouse is not
    working well, press the space bar or [Return] key to cancel the test and to
    go back to the list of choices.
    
    Wheel mice are occasionally not detected automatically, so you will need to
    select your mouse from a list. Be sure to select the one corresponding to
    the port that your mouse is attached to. After selecting a mouse and
    pressing the "%s" button, a mouse image is displayed on-screen. Scroll
    the mouse wheel to ensure that it is activated correctly. Once you see the
    on-screen scroll wheel moving as you scroll your mouse wheel, test the
    buttons and check that the mouse pointer moves on-screen as you move your
    mouse.
bs: Obično DrakX nema problema da odredi broj dugmadi na vašem mišu.
    Ako ima, pretpostaviće da imate miš sa dva dugmeta i podesiće simulaciju
    trećeg dugmeta. Treće dugme se može ''pritisnuti'' na mišu sa dva dugmeta
    istovremenim klikom na lijevo i desno dugme miša. DrakX će automatski
    znati da li miš koristi PS/2, serijski ili USB interfejs.
    
    Ako iz nekog razloga želite navesti drugačiji tip miša, izaberite ga sa
    ponuđene liste.
    
    Ako izaberete miš različit od ponuđenog, biće prikazan testni ekran.
    Koristite miš i točkić da potvrdite da su postavke tačne i da miš radi
    ispravno. Ako miš ne radi kako treba, pritisnite tipku space ili Enter
    da prekinete test i vratite se na listu izbora.
    
    Miševi sa točkićem često nisu prepoznati automatski, stoga trebate izabrati
    miš na listi. Pazite da izaberete odgovarajući port na koji je vaš miš
    priključen. Nakon izbora miša i pritiska na dugme "%s", na ekranu će
    biti prikazana slika miša. Pomjerajte točkić miša kako biste provjerili da li
    ispravno funkcioniše. Kada vidite da se točkić na ekranu pomjera onako
    kako vi vrtite stvarni točkić, provjerite dugmad i provjerite da li se pokazivač
    na ekranu pomjera onako kako vi pomjerate miš.

en: Support the OKI 4w and compatible winprinters.
bs: Podrška za OKI 4w i kompatibilne 'winprinter' štampače.

en: Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up.
bs: Datoteke i wild-cards navedene u datoteci .backupignore na vrhu stabla direktorija neće biti backupovane.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
bs: Pokreće ALSA zvučni sistem (Advanced Linux Sound Architecture)

note: -PO: the first %s is the card type (scsi, network, sound,...) -PO: the second is the vendor+model name
en: Installing driver for %s card %s
bs: Instaliram drajver za %s karticu %s

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
bs: Prebacili ste vaš bivši podrazumjevani štampač ("%s"),Da li će to također biti podrazumjevani štampač podnovim sistemom štampe %s?

en: Enable Server
bs: Omogući server

en: Ukrainian
bs: Ukrajinska

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
bs: Mrežni pristup nije aktivan i nije mogao biti pokrenut. Molim provjerite vašu konfiguraciju i vaš hardware. Onda ponovo pokušajte podesiti udaljeni štampač.

en: Enable "%s" to write the file
bs: Omogući "%s" da piše u datoteku

en: Please insert the Boot floppy used in drive %s
bs: Molim ubacite boot disketu koju ste koristili u jedinicu %s

en: Local network(s)
bs: Lokalna mreža (mreže)

en: Remove Windows
bs: Ukloni Windows

en: Your %s has been configured.
    You may now scan documents using "XSane" from Multimedia/Graphics in the applications menu.
bs: Vaš %s je podešen.
    Sada možete skenirati dokumente koristeći "XSane" koji se nalazi u meniju Aplikacije/Multimedija/Grafika.

en: Firewire controllers
bs: Firewire kontroleri

en: After you have configured the general bootloader parameters, the list of
    boot options that will be available at boot time will be displayed.
    
    If there are other operating systems installed on your machine they will
    automatically be added to the boot menu. You can fine-tune the existing
    options by clicking "%s" to create a new entry; selecting an entry and
    clicking "%s" or "%s" to modify or remove it. "%s" validates your
    changes.
    
    You may also not want to give access to these other operating systems to
    anyone who goes to the console and reboots the machine. You can delete the
    corresponding entries for the operating systems to remove them from the
    bootloader menu, but you will need a boot disk in order to boot those other
    operating systems!
bs: Nakon što podesite opšte parametre bootloadera, dobićete listu opcija
    koja će biti prikazana prilikom svakog boot-a.
    
    Ako na vašem računaru postoje neki drugi operativni sistemi, oni će biti
    dodani na tu listu. Možete fino podesiti postojeće opcije klikajući na
    dugme "%s" da biste dodali novu opciju; izborom postojeće opcije i klikanjem
    na "%s" ili "%s" da biste je izmijenili ili uklonili. "%s" potvrđuje
    vaše izmjene.
    
    Takođe možda ne želite dati pristup na ove druge operativne sisteme bilo
    kome ko sjedne za računar i restartuje ga. Možete obrisati pojedine stavke iz
    boot menija, ali odgovarajuće operativne sisteme više nećete moći pokrenuti
    bez boot diskete!

en: System mode
bs: Sistemske opcije

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
bs: Da biste štampali na NetWare štampač, trebate dati naziv NetWare print servera (Pažnja! Ono može biti različito od njegovog TCP/IP imena!) kao i naziv reda za štampu na štampaču kojem želite pristupiti i eventualno korisničko ime i šifru.

en: Do it later
bs: Uradi kasnije

en: Refresh printer list (to display all available remote CUPS printers)
bs: Osvježi listu štampača (kako bi bili prikazani svi dostupni CUPS štampači)

en: When this option is turned on, on every startup of CUPS it is automatically made sure that
    
    - if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
    
    - if /etc/cups/cupsd.conf is missing, it will be created
    
    - when printer information is broadcasted, it does not contain "localhost" as the server name.
    
    If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points.
bs: Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa biće provjereno da
    
    - je instaliran LPD/LPRng, CUPS neće prepisati /etc/printcap
    
    - postoji /etc/cups/cupsd.conf, ako ne onda će biti napravljen
    
    - informacije o štampaču ne sadrže "localhost" kao ime servera prilikom broadcasta.
    
    Ako vam neke od ovih mjera stvaraju probleme, možete isključiti ovu opciju, ali onda se morate sami brinuti da su navedeni uslovi ispunjeni.

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
bs: Ova auto instalacija može biti potpuno automatizovana ako želite,
    u kojem slučaju će ona preuzeti hard disk!!
    (ovo je namjenjeno za instaliranje na drugi računar).
    
    Možda ćete radije željeti ponoviti instalaciju.

en: Network printer "%s", port %s
bs: Mrežni štampač "%s", port %s

en: Please choose what network adapter will be connected to your Local Area Network.
bs: Molim izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu.

en: OK to restore the other files.
bs: OK za vraćanje ostalih datoteka.

en: Please choose your keyboard layout.
bs: Molim izaberite izgled vaše tastature.

en: Printer Device URI
bs: URI uređaja štampača

en: Not erasable media!
bs: Medij nije izbrisiv!

en: Terminal-based
bs: Terminal

en: Enable/Disable IP spoofing protection.
bs: Uključi/isključi zaštitu od lažiranja IP adrese.

en: Installing a printing system in the %s security level
bs: Instaliram sistem za štampu na sigurnosnom nivou: %s

en: The user name is too long
bs: Korisničko ime je predugačko

en: Other OS (windows...)
bs: Ostali OSi (Windows...)

en: WebDAV remote site already in sync!
bs: Udaljeni WebDAV sajt je već sinhroniziran!

en: Reading printer database...
bs: Čitam bazu podataka o štampačima ...

en: Generate auto install floppy
bs: Napravi autoinstalacijsku disketu

en: 		 user name: %s
    		 on path: %s
bs: 		 korisničko ime: %s
    		 u direktoriju: %s

en: Somalia
bs: Somalija

en: No open source driver
bs: Nema open source drajver

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
bs: Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.
    Sigurnosne osobine na maksimumu.

en: Nicaragua
bs: Nikaragva

en: New Caledonia
bs: Nova Kaledonija

en: European protocol (EDSS1)
bs: Evropski protokol (EDSS1)

en: /_Delete
bs: /_Izbriši

en: Video mode
bs: Video mod

en: Please enter your email address below
bs: Molim unesite vašu email adresu ispod

en: Network Monitoring
bs: Nadzor mreže

en: New size in MB:
bs: Nova veličina u MB:

en: Partition table type: %s
bs: Tip tabele particija: %s

en: Authentication Windows Domain
bs: Autentikacijska Windows domena

en: US keyboard
bs: US tastatura

en: Buttons emulation
bs: Emulacija dugmeta

en: , network printer "%s", port %s
bs: , mrežni štampač "%s", port %s

en: 
    Drakbackup activities via tape:
bs: 
    Drakbackup aktivnosti putem trake:

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
bs: 
     Problem sa FTP konekcijom: Nije bilo moguće poslati vaše backup datoteke putem FTPa.

en: Sending Speed:
bs: Brzina slanja:

en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card uses
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
bs: Klasični način utvrđivanja bugova u zvučnom sistemu je izvršavanje
    sljedećih naredbi:
    
    
    - "lspcidrake -v | fgrep AUDIO" će vam reći koji drajver inače koristi
    vaša kartica
    
    - "grep sound-slot /etc/modules.conf" će vam reći koji drajver je
    trenutno u upotrebi
    
    - sa "/sbin/lsmod" možete provjeriti da li je modul (drajver) učitan
    ili ne
    
    - "/sbin/chkconfig --list sound" i "/sbin/chkconfig --list alsa" vam
    govore da li su servisi sound i alsa podešeni da se pokreću na
    initlevel 3
    
    - "aumix -q" će vam reći da li je zvuk utišan (muted) ili ne
    
    - "/sbin/fuser -v /dev/dsp" vam govori koji program koristi zvučnu karticu.

en: Mail alert configuration
bs: Podešavanje Mail obavijesti

en: Matching
bs: Odgovara

en: Bosnian
bs: Bosanska

en: Release:
bs: Izdanje:

en: Connection speed
bs: Brzina konekcije

en: Namibia
bs: Namibija

en: Database Server
bs: Server baze podataka

en: special capacities of the driver (burning ability and or DVD support)
bs: posebne mogućnosti drajvera (mogućnost prženja i/ili podrška za DVD)

en: Can't add a partition to _formatted_ RAID md%d
bs: Ne mogu dodati particiju na _formatiran_ RAID md%d

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
bs: Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,
    PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.
    Vašu karticu takođe podržava XFree %s koji može imati bolju podršku za 2D.

en: Please wait, setting security options...
bs: Molim sačekajte, podešavam sigurnosne opcije...

en: Unknown|CPH05X (bt878) [many vendors]
bs: Nepoznat|CPH05X (bt878) [razni proizvođači]

en: Launch the graphical environment when your system starts
bs: Pokreni X-Window sistem na startu

en: hourly
bs: svakog sata

en: Right Shift key
bs: Desna Shift tipka

en:           Successfuly Restored on %s
bs:           uspješno spašeni na %s

en: Making printer port available for CUPS...
bs: Omogućujem pristup štampaču putem CUPSa...

en: Antigua and Barbuda
bs: Antigua i Barbuda

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
bs: !!! Određuje šifru u sistemskoj bazi podataka koja se razlikuje
    od one u bazi podataka Terminal Servera.
    Obrišite i ponovo dodajte korisnika u Terminal Server da biste omogućili pristup.

en: Spanish
bs: Španska

en: Direct root login
bs: Direktna root prijava

en: Configuring applications...
bs: Podešavam aplikacije...

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
bs: 
    Dobro došli u Čarobnjak za podešavanje štampača
    
    Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj računar, na mrežu ili na udaljeni Windows računar.
    
    Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i upalite ga kako bi bio automatski prepoznat. Takođe mrežni štampači i Windows računari moraju biti povezani i upaljeni.
    
    Obratite pažnju da automatsko prepoznavanje mrežnih štampača traje duže nego prepoznavanje štampača spojenih na ovaj računar. Stoga ugasite prepoznavanje mrežnih štampača i/ili Windows štampača ako vam ona nije potrebna.
    
     Kliknite na "Dalje" kada budete spremni, ili na "Odustani" ako ne želite podesiti štampač sada.

en: Normal modem connection
bs: Normalna modemska konekcija

en: File Selection
bs: Izbor datoteka

en: Erase tape before backup
bs: Obriši traku prije backupa

en: Run config tool
bs: Pokreni alat za podešavanje

en: Bootloader installation
bs: Instalacija bootloadera

en: Root partition size in MB:
bs: Veličina root particije u MB:

en: This is a mandatory package, it can't be unselected
bs: Ovo je obavezan paket, ne može biti isključen

en: Etherboot ISO image is %s
bs: Etherboot ISO image je %s

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
bs: named (BIND) je Domain Name Server (DNS) koji se koristi za određivanje IP adrese iz imena računara.

en: November
bs: Novembar

en: Disconnect...
bs: Prekini konekciju...

en: Report
bs: Izvještaj

en: level
bs: nivo

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
bs: Sve incidente će pratiti jedan kvalificiran MandrakeSoft tehnički eksper.

en: Package Group Selection
bs: Izbor grupe paketa

en: Allow local hardware
    configuration.
bs: Omogući lokalno podešavanje
    hardvera.

en: Restore Via Network Protocol: %s
bs: Restore putem mrežnog protokola: %s

en: You can configure each parameter of the module here.
bs: Ovdje možete podesiti svaki parametar modula.

en: Choose the resolution and the color depth
bs: Izaberite rezoluciju i broj boja

en: Emulate third button?
bs: Emuliraj treće dugme?

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
bs: Ne možete napraviti novu particiju
    (pošto ste dosegli maksimalan broj primarnih particija).
    Najprije uklonite primarnu particiju i napravite extended (proširenu) particiju.

en: Mount
bs: Montiraj

en: Creating auto install floppy
bs: Pravim autoinstalacijsku disketu

en: Install updates
bs: Instaliraj update

en: text box height
bs: visina tekst polja

en: State
bs: Status

en: Be sure a media is present for the device %s
bs: Provjerite da li je ubačena disketa za ovaj uređaj %s

en: Enable multiple profiles
bs: Omogući više profila

en: Do not interpret character or block special devices on the file system.
bs: Nemoj interpretirati karakter ili blok uređaje na datotečnom sistemu.

en: These options can backup and restore all files in your /etc directory.
bs: Ove opcije mogu spasiti ili vratiti sve datoteke u vašem /etc direktoriju.

en: Local printer
bs: Lokalni štampač

en: Files Restored...
bs: Vraćene datoteke...

en: Package selection
bs: Izbor paketa

en: Mauritania
bs: Mauritanija

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
bs: Mogu zadržati trenutnu konfiguraciju i pretpostaviti da ste već podesili DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao Mrežnu adresu koju ćete koristiti na lokalnoj mreži; neću je ponovo podesiti i neću mijenjati vaše postavke DHCP servera.
    
    Predložena DNS postavka je Caching nameserver koji je podešen na firewallu. Možete je zamijeniti npr. IP adresom DNS servera vašeg ISPa.
    		       
    Ako ne, mogu ponovo podesiti vaš interfejs i podesiti DHCP server za vas.

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
bs: Nije pronađen nijedan lokalni štampač! Ako želite ručno instalirati štampač, unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/lp1, ...).

en: All primary partitions are used
bs: Sve primarne particije su u upotrebi

en: LPD server "%s", printer "%s"
bs: na LPD serveru "%s", štampač "%s"

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
bs: Nakon što je to gotovo, preporučujemo da restartujete vaš X
    okoliš kako bi se izbjegao problem sa promjenom naziva računara.

en: Automatic detection and configuration of hardware at boot.
bs: Automatsko prepoznavanje i podešavanje hardware-a tokom boota.

en: Installation Server Configuration
bs: Podešavanje instalacionog servera

en: Configuring IDE
bs: Podešavam IDE

en: Network functionality not configured
bs: Mrežna funkcionalnost nije podešena

en: Configure module
bs: Podesi modul

en: Cocos (Keeling) Islands
bs: Kokosova ostrva

en: You'll need to reboot before the modification can take place
bs: Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu

en: Provider phone number
bs: Broj telefona provajdera

en: Host %s
bs: Računar %s

en: Fiji
bs: Fidži

en: Armenia
bs: Armenija

en: Second floppy drive
bs: Druga disketna jedinica

en: About Harddrake
bs: O Harddrake-u

en: Authorize TCP connections to X Window
bs: Autorizuj TCP konekcije na X Window

en: Drive capacity
bs: Kapacitet uređaja

en: Insert a floppy in drive
    All data on this floppy will be lost
bs: Ubacite disketu u jedinicu
    Svi podaci na toj disketi će biti izgubljeni

en: Size: %s
bs: Veličina: %s

en: Control and Shift keys simultaneously
bs: Control i Shift tipka istovremeno

en: secondary
bs: sekundarni

en: View Backup Configuration.
bs: Pogledaj postavke backupa.

en: if set to yes, report check result to syslog.
bs: ako je postavljeno na da, prijavljuje rezultate provjere u syslog.

note: -PO: keep this short or else the buttons will not fit in the window
en: No password
bs: Bez šifre

en: Nigeria
bs: Nigerija

en: %s: %s requires hostname...
bs: %s: %s zahtijeva ime računara...

en: There is no existing partition to use
bs: Nema nijedne postojeće particije za upotrebu

en: The following scanners
    
    %s
    are available on your system.
bs: Sljedeći skeneri
    
    %s
    su dostupni na vašem sistemu.

en: Multi-function device on parallel port #%s
bs: Višenamjenski uređaj na paralelnom portu #%s

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
bs: Da biste štampali na TCP ili socket štampač, morate dati hostname ili IP adresu štampača i opcionalno broj porta (podrazumjeva se 9100). Na HP JetDirect serverima broj porta je obično 9100, na ostalim serverima on može varirati. Pogledajte priručnik vašeg hardware-a.

en: Hard drive information
bs: Informacije o hard disku

en: Russian
bs: Ruska

en: Hide files
bs: Sakrij datoteke

en: Auto-detect printers connected to this machine
bs: Automatski prepoznaj štampače spojene na ovaj računar

en: Sorry, no floppy drive available
bs: Žao mi je, nema disketne jedinice

en: Bolivia
bs: Bolivija

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
bs: Podesite vaš Windows server tako da je štampač dostupan putem IPP protokola i podesite štampanje sa ove mašine koristeći "%s" tip konekcije u Printerdrake-u.

en: Bad package
bs: Neispravan paket

en: Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!
bs: Pretvorite vaš računar u moćan Linux server: Web server, email, firewall, file i print server (itd.) su udaljeni samo nekoliko klikova mišem!

en: DrakSec Basic Options
bs: DrakSec osnovne opcije

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
bs: 
    
    
    Napomena: ako imate ISA PnP zvučnu karticu, moraćete koristiti sndconfig program.  Samo ukucajte "sndconfig" na konzoli.

en: Romania
bs: Rumunija

en: Group
bs: Grupa

en: Canada
bs: Kanada

en: choose device
bs: izaberite uređaj

en: Remove from LVM
bs: Ukloni sa LVMa

en: Timezone
bs: Vremenska zona

en: German
bs: Njemačka

en: Next ->
bs: Dalje ->

en: Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine.
bs: Ako ovo uključite, moći ćete štampati obične tekstualne datoteke na japanskom jeziku. Koristite ovu funkciju samo ako zaista želite štampati japanski tekst, jer kada je aktivirana, više ne možete štampati znakove sa akcentima u latiničnim fontovima (npr. naša slova). Takođe nećete moći prilagoditi margine, veličine znakova, itd. Ova postavka će utjecati samo na štampače koji su definisani na ovom računaru. Ako želite štampati japanski tekst na udaljenom računaru, trebate aktivirati ovu funkciju na tom računaru.

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
bs: 
    Postoji mogućnost da je ova
    particija Driver particija. Vjerovatno
    biste je trebali ostaviti na miru.

en: Guinea-Bissau
bs: Gvineja Bisau

en: Horizontal refresh rate
bs: Brzina horizontalnog osvježavanja

en: Edit
bs: Izmijeni

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
bs: Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za loopback.
    Najprije uklonite loopback

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
bs: Podešavanje mreže koje je napravljeno tokom instalacije sada ne može biti pokrenuto. Molim provjerite da li će mreža postati dostupna nakon bootanja sistema i popravite podešenja koristeći Mandrake Kontrolni centar, sekcija "Mreža i Internet"/"Konekcija", a zatim podesite štampač, ponovo koristeći Mandrake Kontrolni centar, sekcija "Hardver"/"Štampač"

en: USB controllers
bs: USB kontroleri

en: What norm is your TV using?
bs: Koji standard koristi vaš TV?

en: Type:
bs: Tip:

en: Share name
bs: Share naziv

en: enable
bs: uključi

en: Contacting Mandrake Linux web site to get the list of available mirrors...
bs: Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih mirrora...

en: A problem occured while restarting the network: 
    
    %s
bs: Došlo je do problema prilikom restartovanja mreže:
    
    %s

en: Remove the loopback file?
bs: Ukloniti loopback datoteku?

en: Selected size is larger than available space
bs: Izabrana veličina je veća od slobodnog prostora

en: NCP server name missing!
bs: NCP naziv servera nedostaje!

en: Please choose your country.
bs: Molim izaberite vašu zemlju.

en: Hard Disk Backup files...
bs: Datoteke backup-a hard diska...

en: Laotian
bs: Laoska

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
bs: Rstat protokol omogućava korisnicima na mreži da dobave
    mjeru performansi za svaki računar na toj mreži

en: Re-generating list of configured scanners ...
bs: Regeneriram listu podešenih skenera ...

en: Module configuration
bs: Podešavanje modula

en: Scanner
bs: Skener

en: Warning: testing this graphic card may freeze your computer
bs: Upozorenje: testiranje ove grafičke karte može zalediti računar

en: The user name must contain only lower cased letters, numbers, `-' and `_'
bs: Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'

en: Welcome To Crackers
bs: Dobrodošli u Crackers

en: Module options:
bs: Opcije modula

en: Secure your networks with the Multi Network Firewall
bs: Zaštitite vašu mrežu uz Multi Network Firewall

en: Go on without configuring the network
bs: Nastavi bez podešavanja mreže

en: Abort
bs: Prekid

en: No password prompt on %s at port %s
bs: Nema upita za šifru na %s na portu %s

en: Kensington Thinking Mouse with Wheel emulation
bs: Kensington Thinking Mouse sa simulacijom točkića

en: Usage of remote scanners
bs: Upotreba udaljenih skenera

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
bs: Vaša Windows particija je previše fragmentirana. Molim restartujte vaš računar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandrake Linux instalaciju.

en: Dvorak (Norwegian)
bs: Dvorak (Norveška)

en: Hard Disk Backup Progress...
bs: Napredak backup-a hard diska...

en: Unable to fork: %s
bs: Ne mogu izvrsiti fork: %s

en: Type:
bs: Tip:

en: <-- Edit Client
bs: <-- Izmijeni klijent

en: no fonts found
bs: nije pronađen nijedan font

en: Mouse
bs: Miš

en: not enough room in /boot
bs: nema dovoljno prostora u /boot

en: Liechtenstein
bs: Lihtenštajn

en: the color of the progress bar
bs: boja progresne trake

en: Suppress Fonts Files
bs: Onemogući datoteke fontova

en: Add to RAID
bs: Dodaj na RAID

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
bs: Štampač "%s" je uspješno dodan u Star Office/OpenOffice.org/GIMP.

en: No floppy drive available!
bs: Nema pogodne disketne jedinice!

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
bs: Za listu opcija koje su dostupne za trenutni štampač ili pročitajte listu koja je data ispod ili kliknite na dugme "Lista opcija za štampu".%s%s%s

en: Saudi Arabia
bs: Saudijska Arabija

en: Continue anyway?
bs: Svejedno nastavljate?

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
bs: Ako štampač nije naveden, izaberite kompatibilan (pogledajte uputstva za štampač) ili sličan.

en: Printer
bs: Štampač

en: Some devices were added:
bs: Dodani su neki uređaji:

en: Geometry: %s cylinders, %s heads, %s sectors
bs: Geometrija: %s cilindara, %s glava, %s sektora

en: Printing on the printer "%s"
bs: Štampam na štampač "%s"

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
bs: /etc/hosts.allow i /etc/hosts.deny su već podešeni - bez izmjene

en: Restore From Tape
bs: Vrati sa trake

en: To submit a bug report, click the report button, which will open your default browser
    to Anthill where you will be able to upload the above information as a bug report.
bs: Da prijavite bug, kliknite na dugme Prijavi, koje će u vašem web browseru
    otvoriti Anthill, gdje ćete moći poslati gore prikazane informacije kao prijavu buga.

en: Choose the profile to configure
bs: Izaberite profil za podešavanje

en: Password minimum length and number of digits and upcase letters
bs: Minimalna dužina šifre i broj cifara i velikih slova

en: 
    
    Enter a Zeroconf host name without any dot if you don't
    want to use the default host name.
bs: 
    
    Unesite Zeroconf ime računara bez tačaka ako ne želite
    da koristite ponuđeno ime računara.

en: Backup Now from configuration file
bs: Backup-uj sada iz konfiguracijske datoteke

en: Mount points should contain only alphanumerical characters
bs: Tačka montiranja se treba sastojati samo od brojeva i slova

en: Restarting printing system...
bs: Restartujem sistem za štampu ...

en: See hardware info
bs: Pogledaj hardware info

en: Day
bs: Dan

en: First sector of boot partition
bs: Prvi sektor boot particije

en: Printer manufacturer, model
bs: Proizvođač štampača, model

en: [OPTIONS]...
    Mandrake Terminal Server Configurator
    --enable         : enable MTS
    --disable        : disable MTS
    --start          : start MTS
    --stop           : stop MTS
    --adduser        : add an existing system user to MTS (requires username)
    --deluser        : delete an existing system user from MTS (requires username)
    --addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)
    --delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)
bs: [OPTIONS]...
    Podešavanje Mandrake Terminal Servera
    --enable         : omogući MTS
    --disable        : onemogući MTS
    --start          : pokreni MTS
    --stop           : zaustavi MTS
    --adduser        : dodaj postojećeg sistemskog korisnika MTSu (potrebno je korisničko ime)
    --deluser        : obriši postojećeg sistemskog korisnika sa MTSa (potrebno je korisničko ime)
    --addclient      : dodaj klijentski računar MTSu (potrebna je MAC adresa, IP, nbi image ime)
    --delclient      : obriši klijentski računar sa MTSa (potrebna je MAC adresa, IP, nbi image ime)

en: Subnet Mask:
bs: Subnet mask:

en: Set password expiration and account inactivation delays
bs: Izaberite istek šifre i pauze prije deaktivacije računa

en: _: load here is a noun, the load of the system
    Load
bs: Opterećenje

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
bs: Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina
    kojom se cijeli ekran osvježava, i brzina horizontalne
    sinhronizacije, što je brzina kojm se prikazuju skan-linije.
    
    VEOMA JE VAŽNO da ne izaberete tip monitora čiji je sinhronizacioni
    raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.
     Ako niste sigurni, izaberite najmanju opciju.

en: Modify
bs: Izmijeni

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
bs: 
    Komande "%s" i "%s" također omogućavaju izmjenu opcija za pojedinačni zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. "%s <datoteka>".

en: Need hostname, username and password!
bs: Potrebno ime računara, korisničko ime i šifra!

en: Insert floppy
bs: Ubacite disketu

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
bs: WebDAV je protokol koji vam omogućuje da direktorij web servera
    montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da
    je web server podešen kao WebDAV server). Ako želite dodati WebDAV
    tačke montiranja, izaberite "Novi".

en: new
bs: novi

en: Enable/Disable syslog reports to console 12
bs: Uključi/isključi syslog izvještaje na konzoli 12

en: Would you like to try again?
bs: Želite li ponovo pokušati?

en: Wizard
bs: Čarobnjak

en: Edit selected server
bs: Izmijeni izabrani server

en: Please choose where you want to backup
bs: Molim izaberite gdje želite backupovati

en: You need to reboot for the partition table modifications to take place
bs: Moraćete rebootati da bi izmjene tabele particija stupile na snagu

en: Do not include the browser cache
bs: Ne uključuj spremnik web preglednika

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
bs: Nisam uspio provjeriti datotečni sistem %s. Želite li popraviti greške? (pažnja, možete izgubiti podatke)

en: Please, choose your keyboard layout.
bs: Molim izaberite izgled vaše tastature.

en: Please choose your mouse type.
bs: Molim izaberite vrstu vašeg miša.

en: Connect...
bs: Konektuj se...

en: Failed to configure printer "%s"!
bs: Nisam uspio podesiti štampač "%s"!

en: not configured
bs: nije podešeno

en: About
bs: O programu

en: Proxies configuration
bs: Konfiguracija proxija

en: Start: sector %s
bs: Početak: sector %s

en: No Mask
bs: Bez maske

en: Network interface already configured
bs: Mrežni interfejs je već podešen

en: Couldn't access the floppy!
bs: Ne mogu pristupiti disketi!

en: Warning: Free Software may not necessarily be patent free, and some Free
    Software included may be covered by patents in your country. For example, the
    MP3 decoders included may require a licence for further usage (see
    http://www.mp3licensing.com for more details). If you are unsure if a patent
    may be applicable to you, check your local laws.
bs: Upozorenje: Slobodan softver ne mora obavezno biti slobodan od patenata
    i neki elementi slobodnog softvera mogu biti obuhvaćeni patentima u vašoj
    zemlji. Npr. MP3 dekoderi koji su uključeni možda zahtijevaju licencu za daljnje
    korištenje (za više detalja, pogledajte http://www.mp3licensing.com). Ako niste
    sigurni da li se patent odnosi na vas, provjerite vaše lokalne zakone.

en: Mail Server
bs: Mail server

en: Please click on a partition
bs: Kliknite na particiju

en: Multi-function device on HP JetDirect
bs: Višenamjenski uređaj na HP JetDirect

en: Upgrade %s
bs: Unaprijedi %s

en: Select Printer Connection
bs: Izaberi konekciju štampača

en: Scanning for TV channels in progress ...
bs: Pretraga TV kanala je u toku ...

en: Error during sending file via FTP.
     Please correct your FTP configuration.
bs: Greška tokom slanja datoteke preko FTPa.
     Molim ispravite vašu FTP konfiguraciju.

en: IP Range Start:
bs: Početak IP raspona:

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
bs: Internet superserver (obično nazvan inetd) pokreće razne druge Internet
    servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao što su
    telnet, ftp, rsh i rlogin. Isključivanje inetd-a isključuje sve servise za koje je
    on nadležan.

en: the height of the progress bar
bs: visina progresne trake

en: 
    - Save via %s on host: %s
bs: 
    - Spasi pomoću %s na računaru: %s

en: Domain Name Server
bs: DNS server

en: Security Level:
bs: Nivo sigurnosti:

en: Mount points must begin with a leading /
bs: Tačke montiranja moraju počinjati sa /

en: Choose your CD/DVD device
bs: Izaberite vaš CD/DVD uređaj

en: Postfix Mail Server
bs: Postfix mail server

en: Quit without saving
bs: Izlaz bez spašavanja

en: Yemen
bs: Jemen

en: This product is available on the MandrakeStore Web site.
bs: Ovaj proizvod je dostupan na web stranici MandrakeStore (Mandrake prodavnica).

en: => There are many things to choose from (%s).
bs: => Postoji mnogo stvari od kojih možete izabrati (%s).

en: Hard drive detection
bs: Prepoznavanje hard diska

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
bs: Niste izabrali nijednu grupu paketa
    Molim izaberite minimalnu instalaciju koju želite:

en: You need the Alcatel microcode.
    You can provide it now via a floppy or your windows partition,
    or skip and do it later.
bs: Potreban vam je Alcatel mikrokod.
    Možete ga sada potražiti na disketi ili vašoj Windows particiji,
    ili preskočiti ovaj korak i završiti ga kasnije.

en: Please enter the WebDAV server URL
bs: Molim unesite URL WebDAV servera

en: Tajikistan
bs: Tadžikistan

en: Accept
bs: Prihvati

en: Description
bs: Opis

en: Please enter summary text.
bs: Molimo unesite tekst sažetka.

en: Error opening %s for writing: %s
bs: Greška u otvaranju %s za pisanje: %s

en: Mouse type: %s
bs: Vrsta miša: %s

en: Your card can have 3D hardware acceleration support with XFree %s.
bs: Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s.

en: Choose a monitor
bs: Izaberite monitor

en: Empty label not allowed
bs: Prazna oznaka nije dozvoljena

en: Maltese (UK)
bs: Malteška (UK)

en: I can't add any more partition
bs: Ne mogu dodati više particija

en: Size in MB:
bs: Veličina u MB:

en: Remote printer
bs: Udaljeni štampač

en: Please choose a language to use.
bs: Molim izaberite jezik koji ćete koristiti.

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
bs: UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.
    Samo prihvatite kako bi ovaj uređaj ostao podešen.
    Izmjena polja ispod će prepisati ovu konfiguraciju.

en: I can set up your computer to automatically log on one user.
bs: Mogu podesiti vaš računar da automatski prijavi jednog korisnika.

en: Floppy format
bs: Format diskete

en: Generic Printers
bs: Razni štampači

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
bs: Molim izaberite štampač kojem želite slati zadatke štampe ili unesite naziv uređaja / naziv datoteke na ulaznoj liniji

en: The scanners on this machine are available to other computers
bs: Skeneri na ovom računari su dostupni drugim računarima

en: First sector of the root partition
bs: Prvi sektor root particije

en: Alternative drivers
bs: Alternativni drajveri

en: 
    Please check all options that you need.
bs: 
    Molim uključite sve potrebne opcije.

en: Cape Verde
bs: Zelenortska ostrva

en: whether this cpu has the Cyrix 6x86 Coma bug
bs: da li ovaj CPU ima Cyrix 6x86 Coma bug

en: Loading printer configuration... Please wait
bs: Učitavam konfiguraciju štampača... Molim sačekajte

en: early pentiums were buggy and freezed when decoding the F00F bytecode
bs: rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom dekodiranja F00F bytecode-a

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
bs: Molim izaberite port na koji je vaš štampač povezan ili unesite naziv uređaja / naziv datoteke na ulaznoj liniji

en: /Options/Test
bs: /Opcije/Test

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
bs: Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,
    ali vrlo osjetljivim: ne smije biti korišten za računar koji je spojen na
    druge ili na Internet. Nema pristupa šifrom.

en: Mounting partition %s
bs: Montiram particiju %s

en: User name
bs: Korisničko ime

en: Which partition do you want to use for Linux4Win?
bs: Koju particiju želite koristiti za Linux4Win?

en: Test pages
bs: Testna stranica

en: Logical volume name
bs: Naziv logičkog volumena

en: List of data to restore:
bs: Lista podataka za vraćanje:

en: Checking %s
bs: Provjeravam %s

en: TCP/Socket Printer Options
bs: TCP/socket opcije štampača

en: Card mem (DMA)
bs: Memorija kartice (DMA)

en: Disconnecting from Internet
bs: Prekidam vezu na Internet

en: France
bs: Francuska

en: browse
bs: pregledaj

en: Checking installed software...
bs: Provjeravam instalirani software...

en: Remote printer name missing!
bs: Ime udaljenog štampača nedostaje!

en: Do you want to enable printing on printers in the local network?
bs: Da li želite da omogućite štampanje na štampačima u lokalnoj mreži?

en: Turkey
bs: Turska

en: Number of buttons
bs: Broj dugmadi

en: Vietnamese "numeric row" QWERTY
bs: Vijetnamska "red brojeva" QWERTY

en: Module
bs: Modul

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
bs: Pored toga, redovi koji nisu kreirani ovim programom ili sa "foomatic-configure" ne mogu biti premješteni.

en: Ctrl and Alt keys simultaneously
bs: Ctrl i Alt tipke istovremeno

en: United States
bs: SAD

en: User umask
bs: Korisnički umask

en: Default OS?
bs: Podrazumjevani OS?

en: Swiss (German layout)
bs: Švicarska (njemački izgled)

en: Configure all heads independently
bs: Konfiguriši sve glave odvojeno

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
bs: Molim odaberite štampač koji želite podesiti. Podešavanje štampača će raditi potpuno automatski. Ako vaš štampač nije ispravno prepoznat ili ako želite sami podesiti štampač, uključite "Ručno podešavanje".

en: NTP Server
bs: NTP server

en: Sulogin(8) in single user level
bs: Sulogin(8) na jednokorisničkom nivou

en: Load/Save on floppy
bs: Učitaj/snimi na disketu

en: This theme does not yet have a bootsplash in %s !
bs: Ova tema još nema bootsplash u %s !

en: nice
bs: fino

en: Leaving in %d seconds
bs: Napuštam za %d sekundi

en: Please choose which serial port your modem is connected to.
bs: Molim izaberite na koji serijski port je nakačen vaš modem.

en: Property
bs: Osobina

en: LAN Configuration
bs: Podešavanje LANa

en: Ghana
bs: Gana

en: Path or Module required
bs: Potrebna je staza ili modul

en: Advanced Options
bs: Napredne opcije

en: View Configuration
bs: Pogledaj konfiguraciju

en: At this point, you need to choose which partition(s) will be used for the
    installation of your Mandrake Linux system. If partitions have already been
    defined, either from a previous installation of GNU/Linux or by another
    partitioning tool, you can use existing partitions. Otherwise, hard drive
    partitions must be defined.
    
    To create partitions, you must first select a hard drive. You can select
    the disk for partitioning by clicking on ``hda'' for the first IDE drive,
    ``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
    
    To partition the selected hard drive, you can use these options:
    
     * "%s": this option deletes all partitions on the selected hard drive
    
     * "%s": this option enables you to automatically create ext3 and swap
    partitions in the free space of your hard drive
    
    "%s": gives access to additional features:
    
     * "%s": saves the partition table to a floppy. Useful for later
    partition-table recovery if necessary. It is strongly recommended that you
    perform this step.
    
     * "%s": allows you to restore a previously saved partition table from a
    floppy disk.
    
     * "%s": if your partition table is damaged, you can try to recover it
    using this option. Please be careful and remember that it doesn't always
    work.
    
     * "%s": discards all changes and reloads the partition table that was
    originally on the hard drive.
    
     * "%s": unchecking this option will force users to manually mount and
    unmount removable media such as floppies and CD-ROMs.
    
     * "%s": use this option if you wish to use a wizard to partition your
    hard drive. This is recommended if you do not have a good understanding of
    partitioning.
    
     * "%s": use this option to cancel your changes.
    
     * "%s": allows additional actions on partitions (type, options, format)
    and gives more information about the hard drive.
    
     * "%s": when you are finished partitioning your hard drive, this will
    save your changes back to disk.
    
    When defining the size of a partition, you can finely set the partition
    size by using the Arrow keys of your keyboard.
    
    Note: you can reach any option using the keyboard. Navigate through the
    partitions using [Tab] and the [Up/Down] arrows.
    
    When a partition is selected, you can use:
    
     * Ctrl-c to create a new partition (when an empty partition is selected)
    
     * Ctrl-d to delete a partition
    
     * Ctrl-m to set the mount point
    
    To get information about the different file system types available, please
    read the ext2FS chapter from the ``Reference Manual''.
    
    If you are installing on a PPC machine, you will want to create a small HFS
    ``bootstrap'' partition of at least 1MB which will be used by the yaboot
    bootloader. If you opt to make the partition a bit larger, say 50MB, you
    may find it a useful place to store a spare kernel and ramdisk images for
    emergency boot situations.
bs: Sada trebate izabrati koje particije želite koristiti za instalaciju vašeg
    Mandrake Linux sistema. Ako su particije već definisane, iz prijašnje
    GNU/Linux instalacije ili nekim drugim alatom za particioniranje, možete
    koristiti postojeće particije. U suprotnom, sada morate definisati
    particije vašeg hard diska.
    
    Da biste napravili particije, najprije morate izabrati hard disk. Možete
    izabrati disk za particioniranje klikom na ''hda'' za prvi IDE disk, ''hdb''
    za drugi, ''sda'' za prvi SCSI disk i slično.
    
    Pri particioniranju hard diska, možete koristiti sljedeće opcije:
    
     * "%s": ova opcija briše sve particije na izabranom hard disku
    
     * "%s": ova opcija vam omogućuje da automatski napravite ext3
    i swap particije u slobodnom prostoru vašeg hard diska
    
    "%s" omogućuje pristup dodatnim mogućnostima:
    
     * "%s": snima tabelu particija na disketu. Ovo je korisno za
    kasnije vraćanje tabele particija, ako je potrebno. Strogo je preporučeno
    da izvršite ovaj korak.
    
     * "%s": omogućuje vam da vratite ranije snimljenu tabelu
    particija sa diskete.
    
     * "%s": ako je vaša tabela particija oštećena, možete je pokušati
    obnoviti koristeći ovu opciju. Molim budite pažljivi i zapamtite da
    ova opcija ne uspijeva svaki put.
    
     * "%s": poništava sve promjene i ponovo učitava originalnu tabelu
    particija sa hard diska.
    
     * "%s": isključivanjem ove opcije ćete prisiliti korisnike da ručno
    montiraju i demontiraju izmjenjive medije kao što su diskete i
    CD-ROMovi.
    
     * "%s": koristite ovu opciju ako želite koristiti čarobnjak za
    particioniranje vašeg hard diska. Ovo je preporučeno ako nemate
    izraženo razumijevanje particioniranja.
    
     * "%s": koristite ovu opciju da poništite vaše izmjene.
    
     * "%s": omogućuje dodatne akcije na particijama (tip, opcije,
    formatiranje) i daje više informacija o hard disku.
    
     * "%s": kada završite particioniranje diska, ovo će zapisati
    vaše izmjene na disk.
    
    Prilikom definisanja veličine particije, možete fino podešavati veličinu
    particije koristeći dugmad sa strjelicama na vašoj tastaturi.
    
    Napomena: svaku opciju možete postići tastaturom. Između particija
    se krećete koristeći dugme [Tab] i strjelice [Gore/Dolje].
    
    Kada izaberete particiju, možete koristiti:
    
     * Ctrl-C da napravite novu particiju (ako ste izabrali prazan prostor)
    
     * Ctrl-D da obrišete particiju
    
     * Ctrl-M da podesite tačku montiranja
    
    Da biste dobili informacije o raznim tipovima datotečnog sistema koji
    su dostupni, pročitajte poglavlje o ext2FS iz ''Referentnog priručnika''.
    
    Ako instalirate na PPC računar, trebate napraviti malu HFS ''bootstrap''
    particiju od najmanje 1 MB koju će koristiti yaboot bootloader. Ako se
    odlučite da ovu particiju učinite nešto većom, npr. 50 MB, primjetićete
    da je ona korisno mjesto za čuvanje rezervnog kernela ili ramdisk slika
    za hitne slučajeve.

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
bs: Grafička kartica
    
       Instalacija obično automatski prepoznaje i podešava grafičku karticu
    koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati
    sa liste karticu koja je ugrađena u vaš računar.
    
       U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez
    3D ubrzanja, biće vam predložen izbor servera koji najbolje odgovara
    vašim potrebama.

en: There was an error installing packages:
bs: Došlo je do greške kod instaliranja paketa:

en: Lexmark inkjet configuration
bs: Podešavanje Lexmark inkjet-a

en: Undo
bs: Poništi

en: Save partition table
bs: Snimi tabelu particija

en: Finnish
bs: Finska

en: Macedonia
bs: Makedonija

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
bs: Dijeljenje na nivou korisnika koristi grupu "fileshare". 
    Možete dodavati korisnike u ovu grupu pomoću userdrake-a.

en: Slovenian
bs: Slovenačka

en: Authorize:
    
    - all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to "ALL",
    
    - only local ones if set to "LOCAL"
    
    - none if set to "NONE".
    
    To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5)).
bs: Autorizuj:
    
    - sve servise koje kontrolišu tcp_wrapperi (vidi hosts.deny(5) man stranicu), ako je podešeno na "SVE",
    
    - samo lokalne servise, ako je podešeno na "LOKAL",
    
    - nijedan, ako je podešeno na "NIŠTA".
    
    Da biste autorizovali servise koji su vam potrebni, koristite /etc/hosts.allow (vidi hosts.allow(5)).

en: Libya
bs: Libija

en: Configuring scripts, installing software, starting servers...
bs: Podešavam skripte, instaliram software, pokrećem servere...

en: Printer on parallel port #%s
bs: Štampač na paralelnom portu #%s

en: 
    - Burn to CD
bs: 
    - Prži na CD

en: Table
bs: Tabela

en: I don't know how to format %s in type %s
bs: Ne znam kako formatirati %s kao tip %s

en: USB printer #%s
bs: USB štampač #%s

en: Stop Server
bs: Zaustavi server

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
bs: 
    Izaberite temu za
    lilo i boot ekran,
    možete ih odvojeno
    izabrati

en: Use auto detection
bs: Koristi auto prepoznavanje

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
bs: GPM dodaje podršku za miša tekstualnim aplikacijama kao što je
    Midnight Commander. On također omogućuje konzolne isjeci/umetni operacije
    pomoću miša i uključuje podršku za pop-up menije na konzoli.

en: Started on boot
bs: Pokrenut na bootu

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
bs: Pridružite se MandrakeSoftovom support teamu i Linux zajednici na Internetu, podijelite vaše znanje i pomozite drugima i tako postanite priznat Expert na našem online tech support sajtu:

en: No password aging for
bs: Bez starenja šifre za

en: The following options can be set to customize your
    system security. If you need an explanation, look at the help tooltip.
bs: Možete podesiti sljedeće opcije kako biste prilagodili sigurnost vašeg sistema. Ako vam je potrebno objašnjenje, pogledajte pomoć u tooltipu.

en: Automatically find available printers on remote machines
bs: Automatski pronađi dostupne štampače na udaljenim računarima

en: East Timor
bs: Istočni Timor

en: On Tape Device
bs: na Kasetnom uređaju

en: 
    - Save to Tape on device: %s
bs: 
    - Spasi na traku na uređaju: %s

en: Login name
bs: Korisničko ime

en: Report unowned files
bs: Prijavi datoteke bez vlasnika

en: Del profile...
bs: Briši profil...

en: Installing Foomatic...
bs: Instaliram Foomatic...

en: Please log out and then use Ctrl-Alt-BackSpace
bs: Molim izvršite logout i zatim koristitite Ctrl-Alt-BackSpace

en: detected
bs: detektovan

en: The network needs to be restarted. Do you want to restart it ?
bs: Potrebno je restartovati mrežu. Želite li je restartovati?

en: Package:
bs: Paket:

en: Can't write /etc/sysconfig/bootsplash.
bs: Ne mogu pisati u /etc/sysconfig/bootsplash.

en: SECURITY WARNING!
bs: SIGURNOSNO UPOZORENJE!

en: No, I don't want autologin
bs: Ne, ne želim da se automatski prijavim

en: Windows Migration tool
bs: Alat za Windows migraciju

en: All languages
bs: Svi jezici

en: Removing %s
bs: Uklanjam %s

en: %s not found...
bs: %s nije pronađen...

en: Testing your connection...
bs: Probavam vašu konekciju...

en: Cache size
bs: Veličina cache-a

en: Passwords are now enabled, but use as a networked computer is still not recommended.
bs: Šifra je sada aktivirana, ali korištenje za mrežni računar još nije preporučeno.

en: Start sector:
bs: Početni sektor:

en: Congo (Brazzaville)
bs: Kongo (Brazzaville)

en: Read
bs: Čitaj

en: The package %s needs to be installed. Do you want to install it?
bs: Paket %s treba biti instaliran. Da li ga želite instalirati?

en: Seychelles
bs: Sejšelska ostrva

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
bs: Printerdrake je uporedi ime modela koje je dobijeno od automatskog prepoznavanja štampača sa modelima koji su navedeni u njegovoj bazi podataka kako bi našao najbliži. Ovaj izbor možda nije tačan, pogotovo ako vaš štampač uopšte nije naveden u bazi. Stoga provjerite da li je izbor ispravan i ako je tako kliknite "Model je ispravan", u suprotnom kliknite "Izaberite model ručno" kako biste ručno izabrali vaš model štampača na sljedećem ekranu.
    
    Za vaš štampač Printerdrake je našao:
    
    %s

en: Bad password on %s
bs: Pogrešna šifra na %s

en: 
    There is one unknown printer directly connected to your system
bs: 
    Na vaš sistem je direktno spojen jedan nepoznat štampač

en: Right Control key
bs: Desna Control tipka

en: Insert a FAT formatted floppy in drive %s with %s in root directory and press %s
bs: Ubacite FAT formatiranu disketu u jedinicu %s sa %s u root direktoriju i pritisnite %s

en: Zambia
bs: Zambija

en: Security Administrator (login or email)
bs: Sigurnosni administrator (login ili email)

en: Sorry, we support only 2.4 kernels.
bs: Žalim, podržavamo samo 2.4 kernele.

en: Romanian (qwerty)
bs: Rumunska (qwerty)

en: Under Devel ... please wait.
bs: U izradi ... molim sačekajte.

en: Egypt
bs: Egipat

en: Czech Republic
bs: Češka

en: Sound card
bs: Zvučna kartica

en: Import Fonts
bs: Uvoz fontova

en: You have one big MicroSoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
bs: Imate jednu veliku Microsoft Windows particiju.
    Predlažem da najprije promijenite veličinu te particije
    (kliknite na nju, zatim na "Promijeni veličinu")

en: Suppress Temporary Files
bs: Onemogući privremene datoteke

en: Congratulations, the network and Internet configuration is finished.
bs: Čestitamo, podešavanje mreže i Interneta je završeno.

en: Change partition type
bs: Izmjena tipa particije

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
bs: Rezolucija
    
        Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su
    moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje
    odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane
    konfiguracije je prikazan na monitoru.

en: Network Options
bs: Mrežne opcije

en: Enable msec hourly security check
bs: Uključi msec provjeru svakog sata

en: Display theme
    under console
bs: Tema prikaza
    pod konzolom

en: Statistics
bs: Statistika

en: (on %s)
bs: (na %s)

en: A library which defends against buffer overflow and format string attacks.
bs: Biblioteka koja brani od napada "buffer overflow" i "format string".

en: average
bs: prosjek

en: New printer name
bs: Novo ime štampača

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
bs: Omogući običnom korisniku da montira datotečni sistem.
    Ime korisnika će biti zapisano u mtab tako da on može i demontirati
    datotečni sistem. Ova opcija podrazumijeva opcije noexec, nosuid i
    nodev (osim ako to ne izmijenite kasnijim opcijama, kao u slučaju
    linije user,exec,dev,suid ).

en: Equatorial Guinea
bs: Ekvatorijalna Gvineja

en: Backup System
bs: Backup sistema

en: Build Backup
bs: Izgradi backup

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
bs: Za štampanje datoteke sa komandne linije (terminalski prozor) koristite komandu "%s <datoteka>" ili "%s <datoteka>".

en: Currently, no alternative possibility is available
bs: Trenutno nije dostupna nijedna alternativa

en: Romanian (qwertz)
bs: Rumunska (qwertz)

en: Write Config
bs: Zapiši konfiguraciju

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
bs: Routed demon omogućuje da se automatska IP tabela rutiranja podešava
    preko RIP protokola. Mada se RIP često koristi na malim mrežama, kompleksniji
    protokoli rutiranja su potrebni za složene mreže.

en: Logitech Mouse (serial, old C7 type) with Wheel emulation
bs: Logitech Mouse (serijski, stari C7 tip) sa simulacijom točkića

en: Other (not drakbackup) keys in place already
bs: Drugi (ne drakbackup) ključevi su već na mjestu

en: X (for X Window System) is the heart of the GNU/Linux graphical interface
    on which all the graphical environments (KDE, GNOME, AfterStep,
    WindowMaker, etc.) bundled with Mandrake Linux rely upon.
    
    You will be presented with a list of different parameters to change to get
    an optimal graphical display: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
    
    
    
    Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
    
    
    
    Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
    
    
    
    Test
    
       the system will try to open a graphical screen at the desired
    resolution. If you can see the message during the test and answer "%s",
    then DrakX will proceed to the next step. If you cannot see the message, it
    means that some part of the autodetected configuration was incorrect and
    the test will automatically end after 12 seconds, bringing you back to the
    menu. Change settings until you get a correct graphical display.
    
    
    
    Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
bs: X (skraćeno od X Window System) je srce GNU/Linux grafičkog interfejsa
    o kojem ovise sve grafičke okoline (KDE, GNOME, AfterStep,
    WindowMaker itd.) uključene u Mandrake Linux.
    
    Biće vam predstavljena lista različitih parametara koje možete promijeniti
    da biste dobili optimalan grafički prikaz: Grafička kartica
    
       Instalacija obično automatski prepoznaje i podešava grafičku karticu
    koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati
    sa liste karticu koja je ugrađena u vaš računar.
    
       U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez
    3D ubrzanja, biće vam predložen izbor servera koji najbolje odgovara
    vašim potrebama.
    
    
    
    Monitor
    
       Instalacioni program obično može prepoznati i podesiti monitor koji
    je povezan na vaš računar. Ako se ovo ne desi, možete odabrati neki
    monitor sa ove liste.
    
    
    
    Rezolucija
    
       Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su
    moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje
    odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane
    konfiguracije je prikazan na monitoru.
    
    
    
    Test
    
       Sistem će pokušati prikazati grafički ekran na željenoj rezoluciji.
    Ako možete vidjeti poruku tokom testa i odgovorite sa "%s", DrakX
    će produžiti na idući korak. Ako ne možete vidjeti poruku, to znači
    da je neki dio automatski prepoznate konfiguracije bio pogrešan.
    Test će automatski završiti nakon 12 sekundi, čime ćete biti vraćeni na
    meni. Mijenjajte postavke dok ne dobijete ispravan grafički prikaz.
    
    
    
    Opcije
    
       Ovdje možete izabrati da li želite da vaš računar automatski pređe na
    grafički interfejs nakon uključivanja. Očito, trebate odgovoriti "%s" ako
    će vaš računar imati ulogu servera ili ako imate problema sa
    podešavanjem ekrana.

en: Browse
bs: Pregledaj

en: Do you want to try to connect to the Internet now?
bs: Da li se želite pokušati spojiti na Internet sada?

en: Belgian
bs: Belgijska

en: Do you have an ISA sound card?
bs: Imate li ISA zvučnu karticu?

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
bs: Nije pronađen ethernet mrežni adapter na vašem sistemu.
    Ne mogu podesiti ovu vrstu konekcije.

en: Can't make screenshots before partitioning
bs: Ne mogu napraviti snimak ekrana prije particioniranja

en: Host Name
bs: Ime računara

en: /File/Save _As
bs: /_Datoteka/Sačuvaj K_ao

en: To get access to printers on remote CUPS servers in your local network you only need to turn on the "Automatically find available printers on remote machines" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s).
bs: Da biste pristupili štampačima na udaljenim CUPS serverima u vašoj lokalnoj mreži, sve što treba je da uključite opciju "Automatski pronađi dostupne štampače na udaljenim računarima"; CUPS serveri će automatski informisati vaš računar o svojim štampačima. Svi štampači koji su poznati vašem računaru su navedeni u sekciji "Udaljeni štampači" glavnog Printerdrake prozora. Ako vaš CUPS server nije u lokalnoj mreži, morate ovdje unijeti njegovu IP adresu i eventualno broj porta kako biste dobili informacije od servera.

en: %s is not in the scanner database, configure it manually?
bs: %s nije u bazi skenera, želite li ga ručno podesiti?

en: Delay before booting default image
bs: Čekanje prije bootanja default image-a

en: Restrict command line options
bs: Ograniči opcije komandne linije

en: East Europe
bs: Istočna Evropa

en: Use free space
bs: Koristi slobodan prostor

en: use dhcp
bs: koristi dhcp

en: Mail alert
bs: Mail obavijest

en: Internet configuration
bs: Internet konfiguracija

en: Detected %s
bs: Detektovan %s

en: /Autodetect _printers
bs: /Automatski prepoznaj štam_pače

en: Finish
bs: Kraj

en: Show automatically selected packages
bs: Automatski prikaži izabrane pakete

en: CPU flags reported by the kernel
bs: CPU flagovi koje je prijavio kernel

en: Something went wrong! - Is mkisofs installed?
bs: Nešto je pogrešno! - Da li je instaliran mkisofs?

en: Please try again
bs: Molim pokušajte ponovo

en: The model is correct
bs: Model je ispravan

en: FAT resizing failed: %s
bs: Smanjivanje FAT particije nije uspjelo: %s

en: Individual package selection
bs: Izbor pojedinačnih paketa

en: This partition is not resizeable
bs: Ovoj particiji ne možete mijenjati veličinu

en: Location
bs: Lokacija

en: Guatemala
bs: Gvatemala

en: Ethernet cards promiscuity check
bs: Provjera promiskuitetnog režima Ethernet kartica

en: This machine
bs: Na ovom računaru

en: DOS drive letter: %s (just a guess)
bs: DOS slovo uređaja: %s (pretpostavka)

en: Bahrain
bs: Bahrein

en: Select the files or directories and click on 'OK'
bs: Izaberite datoteke ili direktorije i kliknite na 'U redu'

en: omit scsi modules
bs: izostavi scsi module

en: family of the cpu (eg: 6 for i686 class)
bs: familija CPUa (npr: 6 za i686 generaciju)

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
bs: Pošto radite mrežnu instalaciju, vaša mreža je već podešena.
    Kliknite na U redu da zadržite tu konfiguraciju ili Odustani za podešavanje vaše Internet & Mrežne konekcije.

en: Run the daily security checks
bs: Izvršavaj dnevne sigurnosne provjere

en: Keyboard layout: %s
bs: Raspored tastature: %s

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
bs: Ovdje možete izabrati da li štampači spojeni na ovaj računar trebaju biti dostupni drugim računarima i kojim drugim računarima.

en: Maltese (US)
bs: Malteška (US)

en: The creation of the boot floppy has been successfully completed
bs: Pravljenje boot diskete je uspješno završeno

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
bs: Montira i demontira sve Network File System (NFS), SMB (Lan
    Manager/Windows) i NCP (NetWare) tačke montiranja.

en: Launch the wizard
bs: Pokreni čarobnjak

en: Tvcard
bs: TV kartica

en: Toggle between normal/expert mode
bs: Prekidač normalnog/ekspertnog moda

en: Size
bs: Veličina

en: Greenland
bs: Grenland

en: Thursday
bs: Četvrtak

en: Not the correct tape label. Tape is labelled %s.
bs: Neispravna oznaka trake. Oznaka je %s.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
bs: Dijeljenje Internet konekcije je već podešeno. Trenutno je
    aktivno.
    
    Šta želite uraditi?

en: Delete All NBIs
bs: Obriši sve NBIje

en: This dialog allows you to fine tune your bootloader:
    
     * "%s": there are three choices for your bootloader:
    
        * "%s": if you prefer grub (text menu).
    
        * "%s": if you prefer LILO with its text menu interface.
    
        * "%s": if you prefer LILO with its graphical interface.
    
     * "%s": in most cases, you will not change the default ("%s"), but if
    you prefer, the bootloader can be installed on the second hard drive
    ("%s"), or even on a floppy disk ("%s");
    
     * "%s": after a boot or a reboot of the computer, this is the delay
    given to the user at the console to select a boot entry other than the
    default.
    
    !! Beware that if you choose not to install a bootloader (by selecting
    "%s"), you must ensure that you have a way to boot your Mandrake Linux
    system! Be sure you know what you are doing before changing any of the
    options. !!
    
    Clicking the "%s" button in this dialog will offer advanced options which
    are normally reserved for the expert user.
bs: Ovaj dijalog vam omogućuje da fino podesite vaš bootloader:
    
     * "%s": ovdje su tri izbora za vaš bootloader:
    
        * "%s": ako preferirate grub (tekstualni meni),
    
        * "%s": ako preferirate LILO sa njegovim tekstualnim interfejsom.
    
        * "%s": ako preferirate LILO sa njegovim grafičkim interfejsom.
    
     * "%s": u većini slučajeva nije potrebno da mijenjate
    ponuđenu vrijednost ("%s"), ali ako to želite, bootloader
    može biti instaliran na drugi hard disk ("%s") ili čak na
    disketu ("%s");
    
     * "%s": nakon boota ili reboota
    računara, ovo je vrijeme koje je dato korisniku za računarom da izabere
    neku opciju iz boot menija koja se razlikuje od izabrane.
    
    !! Pazite da ako odaberete da ne želite instalirati bootloader (klikanjem
    na "%s"), morate se pobrinuti da imate neki način za pokretanje
    vašeg Mandrake Linux sistema! Budite sigurni da znate šta hoćete prije
    nego što promijenite neku od ovih opcija. !!
    
    Klik na dugme "%s" u ovom dijalogu vam pruža napredne opcije
    rezervisane za ekspertnog korisnika.

en: if set, send the mail report to this email address else send it to root.
bs: ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje root-u.

en: Which configuration of XFree do you want to have?
bs: Koju konfiguraciju XFree želite imati?

en: More
bs: Još

en: This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number.
bs: Ovdje koristite istu sintaksu kao program 'cdrecord' za komandnu liniju. 'cdrecord --scanbus' će vam takođe pokazati broj uređaja.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
bs: Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao server.
    Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji prima
    konekcije sa mnogo klijenata. Napomena: ako je vaš računar samo klijent na Internetu, možda je bolje da izaberete niži nivo.

en: Server Name
bs: Ime servera

en: Account Password
bs: Šifra naloga

en: %s cannot be displayed 
    . No Help entry of this type
bs: Ne mogu prikazati %s.
    Nema Pomoći pod ovim imenom

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
bs: Odlučili ste da na particiju instalirate bootloader.
    Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate (npr: System Commander).
    
    Sa kojeg diska vršite boot?

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful: this
    operation is dangerous. If you have not already done so, you
    first need to exit the installation, run "chkdsk c:" from a
    Command Prompt under Windows (beware, running graphical program
    "scandisk" is not enough, be sure to use "chkdsk" in a
    Command Prompt!), optionally run defrag, then restart the
    installation. You should also backup your data.
    When sure, press Ok.
bs: UPOZORENJE!
    
    DrakX će sada promijeniti veličinu vaše Windows particije. Budite pažljivi,
    ova operacija je opasna. Ako to već niste uradili, najprije napustite
    instalaciju, izvršite naredbu "chkdsk c:" iz Command Prompt-a pod
    Windowsom (obratite pažnju da izvršavanje grafičkog programa "scandisk"
    nije dovoljno, trebate koristiti "chkdsk" u komandnom upitu!), opcionalno
    pokrenite "defrag", zatim ponovo pokrenite instalaciju. Također biste
    trebali spasiti sve podatke.
    Kada ste sigurni, kliknite na "U redu".

en: Tajik keyboard
bs: Tadžička tastatura

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
bs: Možete kopirati konfiguraciju štampača koju ste napravili za spooler %s u % s, vaš trenutni spooler. Svi podaci o konfiguraciji (naziv štampača, opis, lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali zadaci štampe neće biti prebačeni.
    Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:

en: Font List
bs: Lista fontova

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
bs: Možda ćete trebati promijeniti vaš Open Firmware boot uređaj
     da biste aktivirali bootloader.  Ako ne vidite upit bootloadera
     prilikom bootanja, držite Command-Option-O-F prilikom boota
     i unesite:
     setenv boot-device %s,\\:tbxi
     Zatim kucajte: shut-down
    Prilikom idućeg boota biste trebali vidjeti upit bootloadera.

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX or some other means to boot your machine
bs: Izgleda da imate OldWorld ili Unknown računar,
     yaboot bootloader neće raditi kod vas.
    Instalacija će se nastaviti, ali ćete
     morati koristiti BootX za bootanje vašeg računara

en: Select file
bs: Izaberite datoteku

en: Choose the network or host on which the local printers should be made available:
bs: Izaberite mrežu ili računar čijim štampačima treba omogućiti pristup.

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
bs: Ove komande možete također koristiti u polju "Komanda za štampu" u dijalozima za štampu mnogih aplikacija, ali ovdje ne morate navesti ime datoteke jer tu datoteku obezbjeđuje sama aplikacija.

en: Print option list
bs: Lista opcija za štampu

en: The change is done, but to be effective you must logout
bs: Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti

en: Country / Region
bs: Zemlja

en: Search servers
bs: Traži servere

en: NCP queue name missing!
bs: NCP naziv reda nedostaje!

en: Warning, another internet connection has been detected, maybe using your network
bs: Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže

en: Cd-Rom labeled "%s"
bs: CD-ROM pod oznakom "%s"

en: CDRW media
bs: CDRW medij

en: Saves and restores system entropy pool for higher quality random
    number generation.
bs: Snima i učitava sistemski spremnik entropije za veću kvalitetu
    generisanja slučajnih brojeva.

en: Turn your computer into a reliable server
bs: Pretvorite vaš računar u pouzdan server

en: Check empty password in /etc/shadow
bs: Provjeri prazne šifre u /etc/shadow

en:  (driver %s)
bs:  (drajver %s)

en: Loopback file(s):
       %s
bs: Loopback datoteka(e):
       %s

en: I don't know
bs: Ne znam

en: Start when requested
bs: Pokreni po potrebi

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
bs: Sada ćete podesiti autoinstalacijsku disketu. Ova opcija je pomalo opasna i mora biti korištena uz pažnju.
    
    Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake kako biste promijenili njihove vrijednosti.
    
    Zbog maksimalne sigurnosti, particioniranje i formatiranje nikad neće biti obavljeno automatski, bez obzira šta izaberete tokom instalacije na ovaj računar.
    
    Da li želite nastaviti?

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
bs: 
    
    Vaša kartica trenutno koristi %s "%s" drajver (uobičajeni drajver za vašu karticu je "%s")

en: Connecting to Internet
bs: Spajam se na Internet

en: Cpuid level
bs: Nivo cpuid-a

en: Novell server "%s", printer "%s"
bs: Novell server "%s", štampač "%s"

en: Mongolian (cyrillic)
bs: Mongolska (ćirilica)

en: Add a module
bs: Dodaj modul

en: Profile to delete:
bs: Profil za brisanje:

en: Local measure
bs: Lokalne mjere

en: Warning : IP address %s is usually reserved !
bs: Upozorenje: IP adresa %s je obično rezervisana !

en: Account Login (user name)
bs: Login naloga (korisničko ime)

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
bs: drakfirewall podešivač
    
    Prije nego što nastavite, provjerite da li ste ispravno podesili pristup
    mreži/Internetu pomoću alata drakconnect.

en: Accept broadcasted icmp echo
bs: Prihvati broadcast ICMP eho

en: Uruguay
bs: Urugvaj

en: Path selection
bs: Izbor staze

en: Name/IP address of host:
bs: Ime/IP adresa računara:

en: Custom & system settings
bs: Vlastito i sistemske postavke

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
bs: Nešto loše se dešava na vašem disku. 
    Test integriteta podataka nije uspio. 
    To znači će da pisanje bilo čega na disk rezultirati smećem.

en: Printer host name or IP missing!
bs: Nedostaje hostname štampača ili IP adresa!

en: Please check all users that you want to include in your backup.
bs: Molim izaberite sve korisnike koje želite uključiti u vaš backup.

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
bs: %s se mora podesiti iz printerdrake-a.
    Možete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku Hardware.

en: Bangladesh
bs: Bangladeš

en: Japan (cable)
bs: Japan (kablovska)

en: Initial tests
bs: Probni inicijali

en: Continue
bs: Nastavak

en: Custom Restore
bs: Ručno vraćanje

en: Saturday
bs: Subota

en: "%s": if a sound card is detected on your system, it is displayed here.
    If you notice the sound card displayed is not the one that is actually
    present on your system, you can click on the button and choose another
    driver.
bs: "%s": ako je na vašem sistemu otkrivena zvučna kartica, ona će
    biti prikazana ovdje. Ako primijetite da prikazana zvučna kartica nije ona
    koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki
    drugi drajver.

en: Set the root umask.
bs: Postavlja root-ov umask.

en: Script-based
bs: Skripta

en: Error reading file %s
bs: Greška u čitanju datoteke %s

en: PLL setting:
bs: PLL postavka:

en: You must have a FAT partition mounted in /boot/efi
bs: Morate imati FAT particiju montiranu na /boot/efi

en:  on
bs:  na

en: The URL must begin with http:// or https://
bs: URL mora počinjati sa http:// ili https://

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
bs: Možete dati direktno URI za pristup štampaču. URI mora zadovoljavati ili CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja podržani od svih spoolera.

en: Other OS (SunOS...)
bs: Ostali OSi (SunOS...)

en: Install/Upgrade
bs: Instaliraj/Unaprijedi

en: %d packages
bs: %d paketa

en: Costa Rica
bs: Kostarika

en: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Backup and Restore application
    
    --default             : save default directories.
    --debug               : show all debug messages.
    --show-conf           : list of files or directories to backup.
    --config-info         : explain configuration file options (for non-X users).
    --daemon              : use daemon configuration. 
    --help                : show this message.
    --version             : show version number.
bs: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Aplikacija za backup and restore
    
    --default             : save default directories.
    --debug               : show all debug messages.
    --show-conf           : list of files or directories to backup.
    --config-info         : explain configuration file options (for non-X users).
    --daemon              : use daemon configuration. 
    --help                : show this message.
    --version             : show version number.

en: Domain Authentication Required
bs: Potrebna je autentikacija na domeni

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
bs: 
    
     Hvala:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: Use libsafe for servers
bs: Koristi libsafe za servere

en: Icelandic
bs: Islandska

en: 
    Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]
bs: 
    Upotreba: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]

en: Maximum size
     allowed for Drakbackup (MB)
bs: Unesite maksimalnu veličinu
     dozvoljenu za Draxbackup (MB)

en: Circular mounts %s
bs: Kružno montiranje %s

en: Lilo/grub mode
bs: LILO/grub opcije

en: Martinique
bs: Martinik

en: Old user list:
bs: Stara lista korisnika:

en: Search Backups
bs: Pretraži backupe

en: a number
bs: broj

en: Swedish
bs: Švedska

note: -PO: the %s is the driver type (scsi, network, sound,...)
en: Which %s driver should I try?
bs: Koji %s drajver ću pokušati?

en: You will receive an alert if one of the selected services is no longer running
bs: Primićete obavještenje ako neki od izabranih servisa prestane raditi

en: Weekday
bs: Dan u sedmici

en: Filesystem types:
bs: Tipovi file sistema:

en: Northern Mariana Islands
bs: Sjeverna Marijanska ostrva

en: , multi-function device on HP JetDirect
bs: , višenamjenski uređaj na HP JetDirect

en: none
bs: nijedan

en: Name of the profile to create (the new profile is created as a copy of the current one) :
bs: Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija postojećeg) :

en: Floppy
bs: Disketa

en: Ghostscript referencing
bs: Ghostscript referenciranje

en: Authorize all services controlled by tcp_wrappers
bs: Autorizuj sve servise koje kontrolišu tcp_wrapperi

en: Move
bs: Premještanje

en: Bootloader to use
bs: Bootloader koji ćete koristiti

en: SMB server host
bs: SMB server ime

en: Name Servers:
bs: DNS serveri:

en: Minute
bs: Minuta

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
bs: 
    Pažnja
    
    Molim pročitajte pažljivo uslove licence ispod. Ako se ne slažete sa bilo
    kojim dijelom, nije vam dozvoljeno da instalirate naredni CD medij. Pritisnite
    dugme 'odbij' da biste nastavili sa instalacijom bez korištenja ovog medija.
    Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu
    provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)
    obliku.
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.

en: /_Expert mode
bs: /_Ekspertni mod

en: Remove this printer from Star Office/OpenOffice.org/GIMP
bs: Ukloni ovaj štampač iz Star/Open Offica

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
bs: Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi
    i dostupnosti (clusteri servera).

en: 4 billion colors (32 bits)
bs: 4 milijarde boja (32 bita)

en: License
bs: Licenca

en: This may take a moment to generate the keys.
bs: Možda će trebati par trenutaka da se generišu ključevi.

en: Here, you can setup the security level and administrator of your machine.
    
    
    The Security Administrator is the one who will receive security alerts if the
    'Security Alerts' option is set. It can be a username or an email.
    
    
    The Security Level menu allows you to select one of the six preconfigured security levels
    provided with msec. These levels range from poor security and ease of use, to
    paranoid config, suitable for very sensitive server applications:
    
    
    <span foreground="royalblue3">Poor</span>: This is a totally unsafe but very
    easy to use security level. It should only be used for machines not connected to
    any network and that are not accessible to everybody.
    
    
    <span foreground="royalblue3">Standard</span>: This is the standard security
    recommended for a computer that will be used to connect to the Internet as a
    client.
    
    
    <span foreground="royalblue3">High</span>: There are already some
    restrictions, and more automatic checks are run every night.
    
    
    <span foreground="royalblue3">Higher</span>: The security is now high enough
    to use the system as a server which can accept connections from many clients. If
    your machine is only a client on the Internet, you should choose a lower level.
    
    
    <span foreground="royalblue3">Paranoid</span>: This is similar to the previous
    level, but the system is entirely closed and security features are at their
    maximum
bs: Ovdje možete podesiti nivo sigurnosti i administratora ovog računara.
    
    
    Sigurnosni administrator je onaj koji će dobijati sigurnosna upozorenja
    ako je aktivna opcija 'Sigurnosna upoyorenja'. Ovo može biti korisničko
    ime ili e-mail.
    
    
    Meni Nivo sigurnosti vam omogućuje da izaberete jedan od šest gotovih
    nivoa sigurnosti koje pruža msec. Ovi nivoi imaju raspon od slabe
    sigurnosti i jednostavnog korištenja, do paranoidnih postavki, prikladnih za
    vrlo osjetljive serverske aplikacije:
    
    
    <span foreground="royalblue3">Slab</span>: Ovo je potpuno neupotrebljiv
    nivo sigurnosti, ali lagan za upotrebu. Treba ga koristiti samo na računarima
    koji nisu spojeni na mrežu i koji nisu dostupni svakome.
    
    
    <span foreground="royalblue3">Standardan</span>: Ovo je standardna
    sigurnost koja se preporučuje za računar koji će biti korišten za spajanje
    na Internet kao klijent.
    
    
    <span foreground="royalblue3">Visok</span>: Postoje već neka
    ograničenja, a automatizovane provjere se vrše svake noći.
    
    
    <span foreground="royalblue3">Viši</span>: Sigurnost je sada dovoljno
    visoka da bi se sistem mogao koristiti kao server koji prihvata konekcije
    od mnogih klijenata. Ako je vaš računar samo klijent na Internetu, trebali
    biste izabrati niži nivo.
    
    
    <span foreground="royalblue3">Paranoičan</span>: Ovo je slično kao
    prethodni nivo, ali je sistem potpuno zatvoren i sigurnosne mogućnosti
    su na maksimumu.

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
bs: Automatsko prepoznavanje štampača (lokalni, TCP/Socket i SMB štampači)

en: Sagem (using pppoa) usb
bs: Sagem (koristeći pppoa) usb

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
bs: Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu kreirati novi file sistemi. Molim provjerite vaš hardware i pronađite uzrok greške

en: Starting the printing system at boot time
bs: Pokrećem sistem za štampu tokom boota

en: Do you want to start the connection at boot?
bs: Da li želite pokrenuti konekciju prilikom boota?

en: Processor ID
bs: ID procesora

en: Sound trouble shooting
bs: Rješavanje problema sa zvukom

en: Polish (qwerty layout)
bs: Poljska (qwerty)

en: /_Add Printer
bs: /_Dodaj štampač

en: 
    Drakbackup activities via CD:
bs: 
    Drakbackup aktivnosti putem CDa:

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
bs: Sada ćete instalirati sistem za štampu %s na sistemu koji je na sigurnosnom nivou % s.
    
    Ovaj sistem za štampu pokreće demon (pozadinski proces) koji čeka zadatke štampe i rješava ih. Ovom demonu takođe mogu pristupiti drugi računari putem mreže, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih demona pokreću na ovom sigurnosnom nivou.
    
    Da li zaista želite podesiti štampanje na ovom računaru?

en: This partition can't be used for loopback
bs: Ova particija se ne može koristiti za loopback

en: File already exists. Use it?
bs: Datoteka već postoji. Želite li je koristiti?

en: received:
bs: primljeno:

en: Right Alt key
bs: Desna Alt tipka

en: the list of alternative drivers for this sound card
bs: spisak alternativnih drajvera za ovu zvučnu karticu

en: Tunisia
bs: Tunis

en: Scanner sharing
bs: Dijeljenje skenera

en: Profile:
bs: Profil:

en: Click on a device in the left tree in order to display its information here.
bs: Kliknite na uređaj u drvetu lijevo da dobijete informacije o njemu.

en: Allow/Forbid autologin.
bs: Dozvoli/zabrani autologin.

en: XawTV isn't installed!
bs: XawTV nije instaliran!

en: Do not include critical files (passwd, group, fstab)
bs: Zaobiđi kritične datoteke (passwd, group, fstab)

en: old static device name used in dev package
bs: staro statičko ime uređaja koje koristi dev paket

en: Enable the logging of IPv4 strange packets
bs: Uključi logovanje čudnih IPv4 paketa

en: This label is already used
bs: Ova oznaka je već u upotrebi

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
bs: 
    Dobro došli u Čarobnjak za podešavanje štampača
    
    Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj računar ili spojene na mrežu.
    
    Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i upalite ga kako bi bio auto-prepoznat. Takođe mrežni štampači moraju biti spojeni i upaljeni.
    
    Obratite pažnju da detekcija mrežnih štampača traje duže nego detekcija štampača spojenih na ovaj računar. Stoga ugasite detekciju mrežnih štampača ako vam ona nije potrebna.
    
    Kliknite na "Dalje" kada budete spremni, ili na "Odustani" ako ne želite podesiti štampač sada.

en: Greek (polytonic)
bs: Grčki (politonski)

en: After formatting partition %s, all data on this partition will be lost
bs: Nakon formatiranja particije %s, svi podaci na toj particiji će biti izgubljeni

en: Connection Time:
bs: Vrijeme konekcije:

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
bs: Molim ubacite Instalacioni CD u vaš CD-ROM uređaj i pritisnite U redu kad ste spremni.
    Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade.

en: Use group id for execution
bs: Koristi id grupe za izvršavanje

en: Choose the default user:
bs: Izaberite default korisnika:

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
bs: 
    Ovdje ne morate podešavati štampače na udaljenim CUPS serverima; ovi štampači će biti automatski prepoznati.

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
bs: Mandrake Linux podržava više jezika. Izaberite jezike koje
    želite instalirati. Oni će biti dostupni kada se završi vaša
    instalacija i restartujete vaš sistem.

en: Directory (or module) to put the backup on this host.
bs: Direktorij (ili modul) za smještaj backupa na ovom računaru.

en: Domain
bs: Domena

en: Precise RAM size if needed (found %d MB)
bs: Precizna veličina RAMa ako je potrebno (pronađeno %d MB)

en: LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally
    automated. DrakX will analyze the disk boot sector and act according to
    what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. This way you will be able to load either GNU/Linux or another
    OS.
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If it cannot make a determination, DrakX will ask you where to place the
    bootloader.
bs: LILO i grub su Linux bootloader-i. Ova faza je obično automatizovana.
    DrakX će analizirati boot sektor diska i postupati u skladu s onim što
    zatekne tamo:
    
     * ako pronađe Windows boot sektor, biće zamijenjen sa grub/LILO boot
    sektorom. Na ovaj način bićete u mogućnosti da učitate ili GNU/Linux ili
    neki drugi OS.
    
     * ako pronađe grub ili LILO boot sektor, zamijeniće ga novim.
    
    Ako ne može donijeti odluku, DrakX će vas pitati gdje da postavi
    bootloader.

en: Provider dns 2 (optional)
bs: Provider dns 2 (opcionalno)

en: Boot device
bs: Boot uređaj

en: Which partition do you want to resize?
bs: Kojoj particiji želite promijeniti veličinu?

en: Djibouti
bs: Džibuti

en: A tool to monitor your logs
bs: Alat za pregled vaših logova

en: detected on port %s
bs: detektovan na portu %s

en: Graphics card: %s
bs: Grafička karta: %s

en: /Set as _Default
bs: /Postavi kao _Podrazumijevano

en: Accept icmp echo
bs: Prihvati ICMP eho

en: Logitech CC Series with Wheel emulation
bs: Logitech CC Series sa simulacijom točkića

en: Splash selection
bs: Izbor splash-a

en: Extended partition not supported on this platform
bs: Extended particije nisu podržane na ovoj platformi

en: ISDN Configuration
bs: Podešavanje ISDNa

en: high
bs: visok

en: Internet Connection Sharing
bs: Dijeljenje Internet konekcije

en: Choose file
bs: Izaberi datoteku

en: Summary:
bs: Ukratko:

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
bs: Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti potrebno neko ručno podešavanje nakon instalacije.

en: Printing/Photo Card Access on "%s"
bs: Štampam/pristupam foto kartici na "%s"

en: Daily security check
bs: Dnevna sigurnosna provjera

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
bs: Želite li omogućiti štampanje na štampačima navedenim gore ili na štampačima u lokalnoj mreži?

en: Printer default settings
bs: Podrazumjevane postavke štampača

en: the WP flag in the CR0 register of the cpu enforce write proctection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)
bs: WP flag u CR0 registru CPUa prisiljava zaštitu od pisanja na nivou memorijske stranice, čime je uključeno sprječavanje od neprovjerenih pristupa kernela u korisničku memoriju (drugim riječima, ovo je zaštita od bugova)

en: Generic PS2 Wheel Mouse
bs: Opšti PS2 Miš sa točkićem

en: Removing old printer "%s"...
bs: Uklanjam stari štampač "%s" ...

en: Select a device !
bs: Izaberite uređaj !

en: Remove selected server
bs: Ukloni izabrani server

en: Sagem (using dhcp) usb
bs: Sagem (koristeći dhcp) usb

en: French Southern Territories
bs: Francuske Južne Teritorije

en: the vendor name of the processor
bs: naziv proizvođača procesora

en:         - Maintain %s:
            	For users to be able to log into the system from a diskless client, their entry in
            	/etc/shadow needs to be duplicated in %s. drakTermServ
            	helps in this respect by adding or removing system users from this file.
bs:         - Čuvaj %s:
            		Da bi se korisnici mogli prijaviti na sistem sa klijenta bez diska, njihova stavka u
            		/etc/shadow se mora kopirati u %s. drakTermServ pomaže
            		u ovome tako što dodaje i briše sistemske korisnike iz ove datoteke.

en: All data on this partition should be backed-up
bs: Svi podaci na ovoj particiji bi trebali biti backupovani

en: Installing package %s
bs: Instaliram paket %s

en: Checking device and configuring HPOJ...
bs: Provjeravam uređaj i podešavam HPOJ...

en: To have more partitions, please delete one to be able to create an extended partition
bs: Da biste imali još particija, molim pobrišite jednu kako bi se mogla kreirati extended particija

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
bs: Vaš štampač je podešen automatski kako bi vam dao pristup memoriji foto kartice sa PCa. Sada možete pristupiti vašim foto karticama koristeći grafički program "MToolsFM" (Meni: "Aplikacije" -> "Datotečni alati" -> "MTools File Manager") ili alat komandne linije "mtools" (kucajte "man mtools" na komandnoj liniji za više informacija). Datotečni sistem vaše kartice ćete naći pod slovom "p:", ili pod narednim slovima ako imate više od jednog HP štampača sa jedinicom za foto kartice. U "MToolsFM" promijeniti slovo drajva koristeći polje u gornjem desnom uglu liste datoteka.

en: Choose packages to install
bs: Izaberite pakete za instalaciju

en: ALL existing partitions and their data will be lost on drive %s
bs: SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s

en: Your system does not have enough space left for installation or upgrade (%d > %d)
bs: Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje (%d > %d)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
bs: Svakom štampaču treba dati ime (npr. "stampac"). Polja Opis i Lokacija nije potrebno popuniti. Oni su komentari za korisnike.

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to setup a new printer. The interface presented there is
    similar to the one used during installation.
bs: "%s": klikanjem na dugme "%s" otvorićete čarobnjak za
    podešavanje štampača. Konsultujte odgovarajuće poglavlje "Vodiča za
    početnike" za više informacija o tome kako podesiti novi štampač.
    Interfejs koji je tamo prikazan je vrlo sličan onom koji se koristi
    prilikom instalacije.

en: Bhutan
bs: Butan

en: Network interface
bs: Mrežni interface

en: Disconnection from Internet failed.
bs: Prekid veze sa Internetom nije uspio.

en: Reading printer data...
bs: Čitam podatke o štampaču...

en: Korean keyboard
bs: Korejanska tastatura

en: Not connected
bs: Nije konektovan

en: Greek
bs: Grčka

en: Generic 3 Button Mouse with Wheel emulation
bs: Opšti miš sa 3 dugmeta sa simulacijom točkića

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
bs: Transfer uspješan
    Možda je potrebno da provjerite da li se možete prijaviti na server sa:
    
    ssh -i %s %s\@%s
    
    bez pitanja o šifri.

en: Enable OF Boot?
bs: Omogući boot sa OFa?

en: You can't use JFS for partitions smaller than 16MB
bs: Ne možete koristiti JFS za particije manje od 16MB

en: Erase your RW media (1st Session)
bs: Obrišite vaš RW medij (prva sesija)

en: Mount point
bs: Tačka montiranja

en: An error occurred:
    %s
    Try to change some parameters
bs: Došlo je do greške:
    %s
    Probajte promijeniti neke parametre

en: User :
bs: Korisnik :

en: Restore system
bs: Vrati sistem

en: These are the machines on which the locally connected scanner(s) should be available:
bs: Ovo su računari kojima treba dozvoliti korištenje lokalnog skenera:

en: The DHCP end ip
bs: Krajnja DHCP adresa

en: Another one
bs: Još jedan

en: Colombia
bs: Kolumbija

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
bs: Trenutna konfiguracija `%s':
    
    Mreža: %s
    IP adresa: %s
    IP atributi: %s
    Drajver: %s

en: Details
bs: Detalji

en: For security reasons, it will be disconnected now.
bs: Iz sigurnosnih razloga, sada će biti odspojen.

en: Synchronization tool
bs: Alat za sinhroniziranje

en: Checking your system...
bs: Proveravam vaš sistem...

en: Print
bs: Štampaj

en: Insert the tape with volume label %s
     in the tape drive device %s
bs: Ubacite traku sa oznakom %s u kasetni
    uređaj %s

en: Mongolia
bs: Mongolija

en: Mounted
bs: Montirana

en: Configure CUPS
bs: Podešavanje CUPSa

en: Graphical Interface
bs: Grafički interfejs

en: Restore Users
bs: Vrati korisnike

en: Encryption key for %s
bs: Ključ enkripcije za %s

en: Do you want to recover your system?
bs: Da li želite obnoviti vaš sistem?

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
bs: Portmapper upravlja RPC konekcijama, koje koriste protokoli kao što
    su NFS i NIS. Portmap server mora raditi na računarima koje služe kao
    serveri za protokole koji koriste RPC mehanizam.

en: Detected hardware
bs: Detektovani hardver

en: Mauritius
bs: Mauricijus

en: Myanmar (Burmese)
bs: Mjanmarska (Burmanska)

en: Enabling swap partition %s
bs: Uključujem swap particiju %s

en: There is no FAT partition to use as loopback (or not enough space left)
bs: Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo dovoljno prostora)

en: Armenian (old)
bs: Armenska (stara)

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
bs: Štampač pod imenom "%s" već postoji pod %s: 
    Kliknite na "Prebaci" da to prepišete.
    Možete također unijeti novo ime ili preskočiti ovaj štampač.

en: Find the solutions of your problems via MandrakeSoft's online support platform.
bs: Pronađite rješenja za vaše probleme putem MandrakeSoft-ove online podrške.

en: Monaco
bs: Monako

en: Partitioning failed: %s
bs: Particioniranje nije uspjelo: %s

en: %s formatting of %s failed
bs: %s formatiranje %s nije uspjelo

en: Canada (cable)
bs: Kanada (kablovska)

en: Floppy creation completed
bs: Pravljenje floppy-ja završeno

en: Upgrade
bs: Unaprijedi

en: Workstation
bs: Radna stanica

en: Installing package %s
    %d%%
bs: Instaliram paket %s
    %d%%

en: Kyrgyzstan
bs: Kirgistan

en: Multi-function device on USB
bs: Višenamjenski uređaj na USBu

en: With basic documentation
bs: Sa osnovnom dokumentacijom

en: Anacron is a periodic command scheduler.
bs: Anacron je periodični izvršitelj programa.

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
bs: Morate imati root particiju.
    Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).
    Zatim izaberite opciju ``Tačka montiranja'' i postavite je na `/'

en: Western Sahara
bs: Zapadna Sahara

en: Proxy should be http://...
bs: Proxy treba biti http://...

en: South Africa
bs: Južna Afrika

en: Eject tape after the backup
bs: Izbaci traku nakon backupa

en: Modify printer configuration
bs: Izmjeni konfiguraciju štampača

en: Choose a partition
bs: Izaberi particiju

en: Edit current rule
bs: Izmijeni trenutno pravilo

en: Please test the mouse
bs: Molim testirajte miš

en: Do not update inode access times on this file system
    (e.g, for faster access on the news spool to speed up news servers).
bs: Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu
    (npr. radi bržeg pristupa spool-u na news serverima).

en: 3 buttons with Wheel emulation
bs: 3 dugmeta sa simulacijom točkića

en: Other Media
bs: Drugi medij

en: Backup system files
bs: Backup sistemskih datoteka

en: Sector
bs: Sektor

en: Qatar
bs: Katar

en: You can't select this package as there is not enough space left to install it
bs: Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega

en: generate auto-install floppy
bs: napravi auto-instalacijsku disketu

en: Dialing mode
bs: Način biranja broja

en: File sharing
bs: Dijeljenje datoteka

en: Clean /tmp at each boot
bs: Očisti /tmp prilikom svakog boota

en: Malawi
bs: Malavi

en: local config: false
bs: lokalne datoteke: ne

en: System settings
bs: Sistemske postavke

en: Please choose your type of mouse.
bs: Molim izaberite vrstu vašeg miša.

en: class of hardware device
bs: klasa hardverskog uređaja

en: These are the machines and networks on which the locally connected printer(s) should be available:
bs: Ovo su računari i mreže čiji lokalni štampači trebaju biti dostupni:

en: United Kingdom
bs: Ujedinjeno Kraljevstvo

en: running
bs: aktivan

en: Indonesia
bs: Indonezija

en: default
bs: uobičajeno

en: France [SECAM]
bs: Francuska [SECAM]

en: restrict
bs: ograniči

en: must have
bs: obavezno

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
bs: CUPS ne podržava štampače na Novell serverima ili štampačekoji šalju podatke u komandama slobodnog oblika.

en: Command line
bs: Komandna linija

en: Our full range of Linux solutions, as well as special offers on products and other "goodies", are available on our e-store:
bs: Čitav raspon Linux rješenja, kao i posebne ponude za proizvode i "potrepštine", dostupni su u našoj online radnji:

en: March
bs: Mart

en: access to administrative files
bs: pristup administrativnim datotekama

en: Error during sendmail.
      Your report mail was not sent.
      Please configure sendmail
bs: Greška tokom sendmaila.
      Vaš mail izvještaj nije poslan.
      Molim podesite sendmail

en: Do not allow set-user-identifier or set-group-identifier
    bits to take effect. (This seems safe, but is in fact rather unsafe if you
    have suidperl(1) installed.)
bs: Ne dozvoli bitima set-user-identifier i set-group-identifier
    da stupe na snagu. (Ovo se čini kao sigurno, ali je ustvari prilično
    nesigurno ako ste instalirali suidperl(1).)

en: Automatic dependencies
bs: Automatske ovisnosti

en: Custom settings
bs: Vlastite postavke

en: Restore Other
bs: Vrati ostalo

en: TV card
bs: TV kartica

en: Printer on SMB/Windows 95/98/NT server
bs: Štampač na SMB/Windows 95/98/NT serveru

en: /_Configure CUPS
bs: /_Podešavanje CUPSa

en: Submit lspci
bs: Pošalji lspci

en: Remove selected host/network
bs: Ukloni izabrani računar/mrežu

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
bs: Postfix je Mail Transport Agent, tj. program koji šalje poštu sa jednog računara na drugi.

en: Uzbek (cyrillic)
bs: Uzbečka (ćirilica)

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
bs: Ovdje možete izabrati tipku ili kombinaciju tipki koja će
    izvršiti prebacivanje između raznih rasporeda tastature
    (npr: latinični i ne-latinični)

en: if set to yes, reports check result to tty.
bs: ako je postavljeno na da, prijavljuje rezultate provjere na tty.

en: Restore From CD
bs: Vrati sa CDa

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
bs: Sada ćete konfigurisati vaš računar za dijeljenje Internet konekcije.
    Sa ovom opcijom, ostali računari na vašoj lokalnoj mreži će moći koristiti Internet konekciju ovog računara. 
    
    Prije nego što nastavite, provjerite da li ste podesili vaš mrežni/internet pristup koristeći drakconnect.
    
    Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu mrežu (LAN).

en: Please choose which network adapter you want to use to connect to Internet.
bs: Molim izaberite koji mrežni adapter želite koristiti za spajanje na Internet

en: Photo memory card access on your HP multi-function device
bs: Pristup foto memorijskoj kartici na vašem HP multifunkcionalnom uređaju

en: Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux
bs: Unaprijedite performanse vašeg računara uz pomoć naših odabranih partnera koji pružaju profesionalna rješenja kompatibilna sa Mandrake Linuxom

en: Authors:
bs: Autori:

en: Internet Connection Sharing is now disabled.
bs: Dijeljenje Internet konekcije je sada isključeno.

en: if set to yes, verify checksum of the suid/sgid files.
bs: ako je postavljeno na da, provjerava checksum suid/sgid datoteka.

en: Latin American
bs: Latino-Američka

en: Japanese text printing mode
bs: Japanski režim štampanja

en: Old device file
bs: Stara datoteka uređaja

en: Button `%s': %s
bs: Dugme '%s': %s

en: Please wait
bs: Molim sačekajte

en: None
bs: Ništa

en: The entered IP is not correct.
bs: Unesena IP adresa nije ispravna.

en: Please be sure that the cron daemon is included in your services.
bs: Molim budite sigurni da je cron demon aktiviran u vašim servisima.

en: Ethernet Card
bs: Ethernet kartica

en: Delete selected printer
bs: Obriši izabrani štampač

en: Install
bs: Instalacija

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to stop this operation without losing any data and
    partitions present on this hard drive.
bs: Kliknite na "%s" ako želite obrisati sve podatke i particije koje
    su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na
    "%s" nećete moći vratiti podatke i particije koji se trenutno nalaze
    na ovom hard disku, uključujući i sve Windows podatke.
    
    Kliknite na "%s" da obustavite ovu operaciju bez gubitka
    podataka i particija na ovom hard disku.

en: Exit install
bs: Napusti instalaciju

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
bs: Sve je konfigurisano.
    Sada možete dijeliti Internet konekciju sa ostalim računarima na vašoj lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP).

en: Remote CUPS server
bs: Udaljeni CUPS server

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
bs: Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:
    
    %s
    
    Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom.

en: Submit cpuinfo
bs: Pošalji cpuinfo

en: Minimal install
bs: Minimalna instalacija

en: Ethiopia
bs: Etiopija

en: YES
bs: DA

en: Enable "crontab" and "at" for users
bs: Omogući korisnicima da koriste "crontab" i "at"

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
bs: - pci devices: ovo daje PCI slot, uređaj i funkciju ove kartice
    - eide devices: uređaj može biti master ili slave
    - scsi devices: SCSI id-ovi za: bus i device

en: Total size: %d / %d MB
bs: Ukupna veličina: %d / %d MB

en: disabled
bs: isključen

en: Search for new scanners
bs: Traženje novih skenera

en: Disabling servers...
bs: Isključujem servere...

en: Installation of %s failed. The following error occured:
bs: Instalacija %sa nije uspjela. Javila se sljedeća greška:

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
bs: Ne mogu izvršiti mkinitrd -f /boot/initrd-%s.img %s.

en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They don't have any known security
    issues, but some new ones could be found. In that case, you must make sure
    to upgrade as soon as possible.
    
    
    Do you really want to install these servers?
bs: Izabrali ste sljedeći server (servere): %s
    
    
    Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih sigurnosnih
    problema, ali možda će biti pronađeni u budućnosti. Ako se to desi, morate ih
    upgrade-ovati što prije bude moguće.
    
    
    Da li zaista želite instalirati ove servere?

en: Network printer (TCP/Socket)
bs: Mrežni štampač (TCP/Socket)

en: Backup User files...
bs: Backup-uj korisničke datoteke...

en: Install system
bs: Instalacija sistema

en: First DNS Server (optional)
bs: Prvi DNS server (opcionalno)

en: Alternatively, you can specify a device name/file name in the input line
bs: Alternativno, možete nasvesti naziv uređaja / naziv datoteke na ulaznoj liniji

en: If SERVER_LEVEL (or SECURE_LEVEL if absent)
    is greater than 3 in /etc/security/msec/security.conf, creates the
    symlink /etc/security/msec/server to point to
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    The /etc/security/msec/server is used by chkconfig --add to decide to
    add a service if it is present in the file during the installation of
    packages.
bs: Ako je SERVER_LEVEL (ili, ako ovaj ne postoji, SECURE_LEVEL)
    veći od 3 u /etc/security/msec/security.conf, pravi simbolički link
    /etc/security/msec/server koji pokazuje na /etc/security/msec/server.<SERVER_LEVEL>.
    /etc/security/msec/server koristi chkconfig --add da odluči da li
    da doda servis ako je prisutan u datoteci tokom instalacije paketa.

en: Russian (Phonetic)
bs: Ruska (fonetska)

en: dhcpd Config...
bs: dhcpd podešavanje...

en: The setup has already been done, but it's currently disabled.
bs: Podešavanje je već završeno, ali je trenutno isključeno.

en: LILO/grub Installation
bs: LILO/grub instalacija

en: Israeli
bs: Izraelska

en: Printer "%s" on server "%s"
bs: Štampač "%s" na serveru "%s"

en: Floppy can be removed now
bs: Sada možete izvaditi disketu

en: Truly minimal install
bs: Stvarno minimalna instalacija

en: Denmark
bs: Danska

en: Moving partition...
bs: Premještam particiju...

en: (This) DHCP Server IP
bs: IP adresa (ovog) DHCP servera

en: Test of the configuration
bs: Testiranje konfiguracije

en: Installing %s ...
bs: Instaliram %s...

en: If you told the installer that you wanted to individually select packages,
    it will present a tree containing all packages classified by groups and
    subgroups. While browsing the tree, you can select entire groups,
    subgroups, or individual packages.
    
    Whenever you select a package on the tree, a description appears on the
    right to let you know the purpose of the package.
    
    !! If a server package has been selected, either because you specifically
    chose the individual package or because it was part of a group of packages,
    you will be asked to confirm that you really want those servers to be
    installed. By default Mandrake Linux will automatically start any installed
    services at boot time. Even if they are safe and have no known issues at
    the time the distribution was shipped, it is entirely possible that that
    security holes were discovered after this version of Mandrake Linux was
    finalized. If you do not know what a particular service is supposed to do
    or why it is being installed, then click "%s". Clicking "%s" will
    install the listed services and they will be started automatically by
    default during boot. !!
    
    The "%s" option is used to disable the warning dialog which appears
    whenever the installer automatically selects a package to resolve a
    dependency issue. Some packages have relationships between each other such
    that installation of a package requires that some other program is also
    rerquired to be installed. The installer can determine which packages are
    required to satisfy a dependency to successfully complete the installation.
    
    The tiny floppy disk icon at the bottom of the list allows you to load a
    package list created during a previous installation. This is useful if you
    have a number of machines that you wish to configure identically. Clicking
    on this icon will ask you to insert a floppy disk previously created at the
    end of another installation. See the second tip of last step on how to
    create such a floppy.
bs: Ako ste naveli da želite individualno izabrati pakete, biće vam prikazano
    stablo koje sadrži sve pakete klasifikovane po grupama i podgrupama.
    Pregledajući stablo, možete izabrati čitave grupe, podgrupe ili
    individualne pakete.
    
    Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji
    vam objašnjava svrhu paketa.
    
    !! Ako izaberete neki serverski paket, zato što ste specifično izabrali taj
    paket ili zato što je on dio grupe paketa, bićete zamoljeni da potvrdite da
    zaista želite da taj server bude instaliran. Mandrake Linux obično
    automatski pokreće sve instalirane servise prilikom pokretanja sistema.
    Čak i ako su sigurni i nemaju poznatih problema u trenutku pakovanja
    distribucije, sasvim je moguće da su neke sigurnosne rupe otkrivene
    nakon što je dovršena ova verzija Mandrake Linuxa. Ako niste sigurni
    čemu tačno služi taj paket ili zašto ga treba instalirati, kliknite na "%s".
    Klikom na "%s" instalirate navedene servise i oni će biti automatski
    pokrenuti tokom pokretanja sistema. !!
    
    Opcija "%s" se koristi da bi se isključio dijalog upozorenja
    koji se pojavljuje svaki put kada instalacioni program automatski izabere
    neki paket kako bi razriješio neku zavisnost. Pojedini paketi imaju
    zavisnost jedan od drugog u smislu da instalacija jednog paketa traži
    da bude instaliran i drugi. Instalacioni program može odrediti koji paketi
    su potrebni da bi se zadovoljila zavisnost i uspješno završila instalacija.
    
    Mala ikona sa disketom na dnu liste vam omogućuje da učitate listu paketa
    koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako želite
    da imate nekoliko računara koji su identično podešeni. Nakon klika na ovu
    ikonu bićete zamoljeni da u disketnu jedinicu stavite disketu napravljenu
    tokom ranije instalacije. Pogledajte drugi savjet na zadnjem koraku da biste
    saznali kako se pravi ova disketa.

en: Choose your filesystem encryption key
bs: Izaberite vaš ključ za kodiranje datotečnog sistema

en: Botswana
bs: Bocvana

en: Andorra
bs: Andora

en: (default value: %s)
bs:  (default vrijednost: %s)

en: Set password aging to "max" days and delay to change to "inactive".
bs: Podesi starenje šifre na "max" dana, a pauzu izmjene na "inactive".

en: Alternative test page (Letter)
bs: Alternativna testna strana (Letter)

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you don't know the meaning of an option, simply leave it as it is.
bs: Podešavanje DHCP servera.
    
    Ovdje možete izabrati različite opcije za podešavanje DHCP servera.
    Ako ne znate značenje neke opcije, jednostavno je ostavite kako jeste.

en: Choose an X server
bs: Izaberite X server

en: Swap partition size in MB:
bs: Veličina swap particije u MB:

en: No changes to backup!
bs: Nema izmjena na backupu!

en: Formatted
bs: Formatirana

en: Type of install
bs: Vrsta instalacije

en: Printer "%s" on SMB/Windows server "%s"
bs: Štampač "%s" na SMB/Windows serveru "%s"

en: %d comma separated numbers
bs: %d brojeva razdvojenih zarezom

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
bs: Rusers protokol omogućava korisnicima na mreži da identificiraju
    ko je prijavljen na ostalim računarima.

en: Automatic Steps Configuration
bs: Automatska konfiguracija koraka

en: Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!
bs: Želite li saznati više i doprinijeti Open Source zajednici? Uključite se u svijet Slobodnog softvera!

en: Please select data to backup...
bs: Molim izaberite podatke za backup...

en: Connection failed.
    Verify your configuration in the Mandrake Control Center.
bs: Konekcija nije uspjela.
    Provjerite konfiguraciju u Mandrake Kontrolnom centru.

en: received
bs: primljeno

en: Enable su only from the wheel group members or for any user
bs: Omogući su samo za članove wheel grupe ili za bilo kojeg korisnika

en: /File/_New
bs: /Datoteka/_Nova

en: The DNS Server IP
bs: IP adresa DNS servera

en: IP Range End:
bs: Kraj IP raspona:

en: High
bs: Visok

en: Add a new printer to the system
bs: Dodaj štampač na sistem

en: this field describes the device
bs: ovo polje opisuje uređaj

en: Adding printer to Star Office/OpenOffice.org/GIMP
bs: Dodajem štampač u Star Office/OpenOffice.org/GIMP

en: Local Printers
bs: Lokalni štampači

en: Installation image directory
bs: Direktorij instalacionog image-a

en: NIS Server
bs: NIS server

en: Spain
bs: Španija

en: local config: %s
bs: lokalni konfig: %s

en: This user name has already been added
bs: Ovo korisničko ime je već dodano

en: Choose a file
bs: Izaberi datoteku

en: Apply
bs: Primjeni

en: Auto-detect available ports
bs: Auto prepoznavaj dostupne portove

en: Internet Connection Sharing currently disabled
bs: Dijeljenje Internet konekcije je trenutno neaktivno

en: Belgium
bs: Belgija

en: Kuwait
bs: Kuvajt

en: Choose the window manager to run:
bs: Izaberite window manager koji će se pokretati:

en: December
bs: Decembar

en: sub generation of the cpu
bs: podgeneracija procesora

en: First Time Wizard
bs: Čarobnjak za prvo pokretanje

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
bs: Došlo je do greške, ali ne znam kako da je riješim fino.
    Nastavite na vlastiti rizik.

en: Taiwan
bs: Tajvan

en: please wait, parsing file: %s
bs: molim sačekajte, parsiram datoteku: %s

en: Importance:
bs: Značaj:

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
bs: Da biste mogli štampati sa vašim Lexmark inkjetom na ovoj konfiguraciji, potrebni su vam inkjet drajveri za štampu koje obezbjeđuje Lexmark (http://www.lexmark.com/). Kliknite na link "Drivers". Zatim izaberite vaš model a zatim "Linux" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili shell skripte sa interaktivnom grafičkom instalacijom. Ne morate obaviti ovu konfiguraciju na grafičkom interfejsu. Odustanite odmah nakon licencnog ugovora. Zatim odštampajte stranice za poravnavanje glava sa "lexmarkmaintain" i podesite opcije poravnanja glave pomoću ovog programa.

en: Permissions
bs: Privilegije

en: Provider name (ex provider.net)
bs: Naziv provajdera (npr. provajder.net)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
bs: Vašem sistemu ponestaje resursa. Možda imate neki problem sa instalacijom
    Mandrake Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za ovo,
    pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'.

en: Use the Windows partition for loopback
bs: Koristi Windows particiju za loopback

en: Armenian (typewriter)
bs: Armenska (pisaća mašina)

en: Connection type:
bs: Tip konekcije:

en: Graphical interface
bs: Grafički interfejs

en: Chad
bs: Čad

en: India
bs: Indija

en: XFree %s with 3D hardware acceleration
bs: XFree %s sa 3D hardverskim ubrzanjem

en: Slovakia
bs: Slovačka

en: Singapore
bs: Singapur

en: Cambodia
bs: Kambođa

en: Path
bs: Staza

en: NOT FOUND
bs: NIJE PRONAĐEN

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
bs: Ovdje možete navesti bilo koju komandnu liniju kojoj će biti prosljeđen zadatak umjesto direktnog slanja na štampač.

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
bs: Sistem za štampu (%s) se neće pokrenuti automatski prilikom boota računara.
    
    Moguće je da je automatsko pokretanje isključeno prilikom promjene na viši nivo sigurnosni, pošto je sistem za štampu moguća tačka napada.
    
    Da li želite da ponovo uključite automatsko pokretanje sistema za štampu?

en: Printer %s
    What do you want to modify on this printer?
bs: Štampač %s
    Šta želite da izmjenite na ovom štampaču?

en: Add host
bs: Dodaj računar

en: If you really think that you know which driver is the right one for your card
    you can pick one in the above list.
    
    The current driver for your "%s" sound card is "%s"
bs: Ako stvarno mislite da znate koji drajver je odgovarajući za vašu karticu
    možete odabrati jedan sa gornje liste.
    
    Trenutni drajver za vašu "%s" zvučnu karticu je "%s"

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
bs: Želite li dozvoliti korisnicima da dijele (share) neke od njihovih direktorija?
    Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju "Share" u
    Konqueroru ili Nautilusu.
    
    "Izaberi korisnike" vam omogućuje da podesite ovu opciju zasebno za svakog korisnika.

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
bs: Molim izaberite učitaj ili spasi izbor paketa na disketu.
    Format je isti kao i diskete koje generiše auto_install.

en: China (broadcast)
bs: Kina (broadcast)

en: Use quota for backup files.
bs: Koristi quotu za backup datoteke.

en: Configuring printer "%s"...
bs: Podešavam štampač "%s"...

en: Do not allow execution of any binaries on the mounted
    file system. This option might be useful for a server that has file systems
    containing binaries for architectures other than its own.
bs: Ne dozvoli izvršenje binarnih datoteka na montiranom
    datotečnom sistemu. Ova opcija bi mogla biti korisna za server
    koji ima datotečne sisteme koji sadrže programe za druge arhitekture.

en: Internet connection
bs: Internet konekcija

en: Loading module %s failed.
    Do you want to try again with other parameters?
bs: Učitavanje modula %s nije uspjelo.
    Želite li probati opet sa drugim parametrima?

en: Welcome to the Open Source world.
bs: Dobro došli u svijet otvorenog izvornog koda.

en: Bosnia and Herzegovina
bs: Bosna i Hercegovina

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
bs: Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu tačku montiranja

en: You must enter a host name or an IP address.
bs: Morate unijeti ime računara ili IP.

en: Netherlands
bs: Nizozemska

en: Sending files by FTP
bs: Šaljem datoteke putem FTPa

en: Internal ISDN card
bs: Interna ISDN kartica

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
bs: Nema nijedan poznat OSS/ALSA alternativni drajver za vašu zvučnu karticu (%s) koja trenutno koristi "%s"

en: Title
bs: Naslov

en: Install & convert Fonts
bs: Instaliraj i konvertuj fontove

en: WARNING
bs: UPOZORENJE

en: Installing bootloader
bs: Instaliram bootloader

en: replay
bs: ponovi

en: detected %s
bs: detektovan %s

en: Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention.
bs: Expect je proširenje Tcl skripting jezika koje omogućuje interaktivne sesije bez intervencije korisnika.

en: Virgin Islands (U.S.)
bs: Djevičanska ostrva (SAD)

en: Bad backup file
bs: Loša backup datoteka

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
bs: Dijeljenje Internet konekcije je već podešeno. Trenutno je
    neaktivno (isključeno).
    
    Šta želite uraditi?

en: Enter IP address and port of the host whose printers you want to use.
bs: Unesite IP adresu i port računara čije štampače želite koristiti.

en: Pipe into command
bs: Spoji (pipe) na komandu

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
bs: Neki dio hardware-a na vašem računaru zahtjeva ``vlasničke'' drajvere za rad.
    Možete naći više podataka o njima na: %s

en: Detecting devices...
bs: Prepoznajem uređaje...

en: Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab.
bs: Vlastito vam omogućuje da navedete vaš vlastiti datum i vrijeme.  Ostale opcije koriste run-parts u /etc/crontab.

en: Description of the fields:
bs: Opis polja:

en: Basic options
bs: Osnovne opcije

en: the name of the CPU
bs: naziv procesora

en: Accept bogus IPv4 error messages
bs: Prihvati neispravne IPv4 poruke o grešci

en: Refreshing printer data...
bs: Osvježavam podatke o štampaču...

en: You must also format %s
bs: Morate takođe formatirati i %s

en: Be careful: this operation is dangerous.
bs: Budite oprezni: ova operacija je opasna.

en: Insert a floppy containing package selection
bs: Ubacite disketu koja sadrži izbor paketa

en: Security Alerts:
bs: Sigurnosna upozorenja:

en: Sweden
bs: Švedska

en: Use Expect for SSH
bs: Koristi Expect za SSH

en: Poland
bs: Poljska

en: Other ports
bs: Ostali portovi

en: number of capture buffers for mmap'ed capture
bs: broj capture buffera za mmap-ovani capture

en: SMBus controllers
bs: SMBus kontroleri

en: Connection timeout (in sec)
bs: Timeout konekcije (u sek.)

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
bs: Neki rani i486DX-100 chipovi se ne mogu pouzdano vratiti u radni način nakon korištenja instrukcije "halt"

en: Croatian
bs: Hrvatska

en: Use existing partition
bs: Koristi postojeću particiju

en: Unable to contact mirror %s
bs: Ne mogu pristupiti mirroru %s

en: /Help/_About...
bs: /Pomoć/_O programu...

en: Remove user directories before restore.
bs: Pobriši korisničke direktorije prije vraćanja.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
bs: Sada ćete podesiti udaljeni štampač. Ovo zahtjeva aktivan pristup mreži, ali vaša mreža još uvijek nije podešena. Ako želite nastaviti bez podešavanja mreže, nećete moći koristiti štampač koji sada podešavate. Kako želite da nastavimo?

en: CUPS printer configuration
bs: Podešavanje CUPS štampača

en: could not find any font in your mounted partitions
bs: ne mogu naći nijedan font na montiranim particijama

en: F00f bug
bs: F00F bug

en: Domain Name:
bs: Ime domena:

en: On Floppy
bs: Na disketi

en: Reboot by the console user
bs: Restartovanje za korisnika na konzoli

en: Restore
bs: Vrati

en: if set to yes, check if the network devices are in promiscuous mode.
bs: ako je postavljeno na da, provjerava da li su mrežni uređaji u promiskuitetnom modu.

en: Looking for available packages...
bs: Tražim dostupne pakete...

en: Init Message
bs: Init poruka

en: Rescue partition table
bs: Spasi tabelu particija

en: Cyprus
bs: Kipar

en: Connection complete.
bs: Konekcija završena.

en: Remove from RAID
bs: Ukloni sa RAIDa

en: This encryption key is too simple (must be at least %d characters long)
bs: Ovaj ključ enkripcije je previše jednostavan (mora imati najmanje %d karaktera)

en: Configuration Wizards
bs: Čarobnjaci za podešavanje

en: ISDN connection
bs: ISDN konekcija

en: CD-R / DVD-R
bs: CDROM / DVDROM

en: primary
bs: primarni

en:  on SMB/Windows server "%s", share "%s"
bs: na SMB/Windows serveru "%s", share "%s"

en: This dialog is used to choose which services you wish to start at boot
    time.
    
    DrakX will list all the services available on the current installation.
    Review each one carefully and uncheck those which are not needed at boot
    time.
    
    A short explanatory text will be displayed about a service when it is
    selected. However, if you are not sure whether a service is useful or not,
    it is safer to leave the default behavior.
    
    !! At this stage, be very careful if you intend to use your machine as a
    server: you will probably not want to start any services that you do not
    need. Please remember that several services can be dangerous if they are
    enabled on a server. In general, select only the services you really need.
    !!
bs: Ovim dijalogom možete izabrati koje servise želite pokretati prilikom boota.
    
    Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj
    instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu
    potrebni prilikom boota.
    
    Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis.
    Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne
    mijenjate predloženi izbor.
    
    !! Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vaš
    računar kao server: vjerovatno ne želite da pokrenete neke servise koji
    vam ne trebaju. Molim vas da zapamtite da pojedini servisi mogu biti
    opasni ako su aktivni na serveru. Općenito, izaberite samo one servise
    koji vam stvarno trebaju.
    !!

en: Skip
bs: Preskoči

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
bs: Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani
    za pokretanje tokom boota.

en: the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
bs: frekvencija CPUa u MHz (Megaherc je jedinica koja se može približno usporediti sa brojem instrukcija koje CPU izvršava u sekundi)

en: Mandrake Linux Printer Management Tool
bs: Alat za menadžement štampača za Mandrake Linux

en: important
bs: važno

en: Total Progress
bs: Ukupan napredak

en: DrakX will first detect any IDE devices present in your computer. It will
    also scan for one or more PCI SCSI cards on your system. If a SCSI card is
    found, DrakX will automatically install the appropriate driver.
    
    Because hardware detection is not foolproof, DrakX may fail in detecting
    your hard drives. If so, you'll have to specify your hardware by hand.
    
    If you had to manually specify your PCI SCSI adapter, DrakX will ask if you
    want to configure options for it. You should allow DrakX to probe the
    hardware for the card-specific options which are needed to initialize the
    adapter. Most of the time, DrakX will get through this step without any
    issues.
    
    If DrakX is not able to probe for the options to automatically determine
    which parameters need to be passed to the hardware, you'll need to manually
    configure the driver.
bs: DrakX će najprije potražiti sve IDE uređaje prisutne na vašem računaru.
    Također će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako
    SCSI kartica bude pronađena, DrakX će automatski instalirati odgovarajući
    drajver.
    
    Budući da pronalaženje hardware-a nikad nije savršeno, DrakX možda neće
    pronaći vaše hard diskove. Ako se to desi, moraćete ih navesti ručno.
    
    Ako je potrebno da ručno odaberete PCI SCSI adapter, DrakX će vas pitati
    da li želite navesti neke opcije za njega. Trebate dopustiti DrakXu da
    ispita hardware za neke opcije specifične za tu karticu. Obično DrakX prolazi
    kroz ovaj korak bez problema.
    
    Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete
    ručno navesti opcije za drajver.

en: Users
bs: Korisnici

en: Preparing bootloader...
bs: Pripremam bootloader...

en: Gateway (e.g. %s)
bs: Gateway (tj. %s)

en: The passwords do not match
bs: Šifre se ne poklapaju

en: Examples for correct IPs:
bs: Primjeri ispravnih IPa:

en: Please choose the media for backup.
bs: Molim izaberite medij za backup.

en: Frequency (MHz)
bs: Frekvencija (MHz)

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
bs: Da koristite ovaj izbor spašenih paketa, bootajte instalaciju sa ``linux defcfg=floppy''

en: the number of the processor
bs: broj procesora

en: Hardware clock set to GMT
bs: Hardverski sat podešen na GMT

en: Do you want to start a new configuration ?
bs: Želite li pokrenuti novu konfiguraciju ?

en: Give a file name
bs: Dajte naziv datoteke

en: Please choose the port that your printer is connected to.
bs: Molim izaberite na koji port je priključen vaš štampač.

en: Change Cd-Rom
bs: Promijenite CD-ROM

en: Paraguay
bs: Paragvaj

en: Configuration is complete, do you want to apply settings ?
bs: Podešavanje je završeno, želite li primijeniti postavke?

en: Use Incremental/Differential Backups  (do not replace old backups)
bs: Koristi inkrementalni/diferencijalni backup  (nemoj prebrisati stare backupe)

en: There's no known driver for your sound card (%s)
bs: Nema poznatih drajvera za vašu zvučnu karticu (%s)

en: force
bs: prisili

en: Exit
bs: Izlaz

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
bs: NAPOMENA: Ovisno o modelu štampača i sistemu štampe, biće instalirano do %d MB dodatnog softvera.

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
bs: Nemate nijedan podešen interfejs.
    Podesite ih prvo klikajući na 'Podesi'

en: Estonian
bs: Estonska

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
bs: Apache je World Wide Web server.  Koristi se za posluživanje HTML
    datoteka i CGI skripti.

en: Enter your CD Writer device name
     ex: 0,1,0
bs: Unesite naziv uređaja vašeg CD Writera
     npr: 0,1,0

en: ALL
bs: SVE

en: Add/Del Clients
bs: Dodaj/obriši klijente

en: Choose the network interface
bs: Izaberite mrežni interface

en: Unknown Model
bs: Nepoznat model

en: CD/DVD burners
bs: CD/DVD pržilica

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
bs: Particija koja se boota po defaultu
        (za MS-DOS boot, ne za lilo)

en: Enable "%s" to read the file
bs: Omogući "%s" da čita datoteku

en: choose image
bs: izaberite image

en: Firewalling configuration detected!
bs: Otkrivena konfiguracija firewalla!

en: Connection name
bs: Naziv konekcije

en: x coordinate of text box
    in number of characters
bs: x koordinata tekst polja
    u broju znakova

en: You may not be able to install lilo (since lilo doesn't handle a LV on multiple PVs)
bs: Možda nećete biti u mogućnosti instalirati lilo (pošto lilo ne može rukovati LVom ili sa više PVa)

en: Updating package selection
bs: Osvježavam izbor paketa

en: Where do you want to mount the loopback file %s?
bs: Gdje želite montirati loopback datoteku %s?

en: The floppy has been successfully generated.
    You may now replay your installation.
bs: Disketa je uspješno napravljena.
    Sada možete ponoviti vašu instalaciju.

en: Use CD-R/DVD-R to backup
bs: Koristi CD/DVDROM za backup

en: the number of buttons the mouse has
bs: broj dugmadi koje ima miš

en: Replay
bs: Ponovi

en: Backup other files
bs: Backup ostalih datoteka

en: No floppy drive available
bs: Nema pogodne disketne jedinice

en: Backup files are corrupted
bs: Backup datoteke su oštećene

en: TV norm:
bs: TV standard :

en: Cpuid family
bs: Cpuid familija

en: type: thin
bs: tip: tanki

en: Lithuanian AZERTY (new)
bs: Litvanska AZERTY (nova)

en: yes means the arithmetic coprocessor has an exception vector attached
bs: da znači da aritmetički koprocesor ima priključen exception vector

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    Please be sure to add a /boot partition
bs: Izabrali ste softversku RAID particiju kao root (/).
    Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.
    Molim kasnije dodajte /boot particiju

en: Other OS (MacOS...)
bs: Ostali OSi (MacOS...)

en: To activate the mouse,
bs: Da aktivirate miša,

en: Bringing up the network
bs: Pokrećem mrežu

en: Screenshots will be available after install in %s
bs: Snimanje ekrana će biti dostupno nakon što instalirate u %s

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose which one you want to resize in order to install your new
    Mandrake Linux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
bs: Na vašem hard disku ustanovljeno je više od jedne Microsoft particije.
    Molim izaberite onu koju želite smanjiti kako biste instalirali vaš
    Mandrake Linux operativni sistem.
    
    Svaka particija je navedena ovako: "Linux ime", "Windows ime",
    "Kapacitet".
    
    "Linux ime" se sastoji od: "vrste hard diska", "broja hard diska",
    "broja particije" (na primjer, "hda1").
    
    "Vrsta hard diska" je "hd" ako je vaš hard disk IDE, a "sd" ako je
    u pitanju SCSI hard disk.
    
    "Broj hard diska" je uvijek slovo nakon "hd" ili "sd". Kod IDE hard
    diskova:
    
     * "a" znači "master hard disk na primarnom IDE kontroleru";
    
     * "b" znači "slave hard disk na primarnom IDE kontroleru";
    
     * "c" znači "master hard disk na sekundarnom IDE kontroleru";
    
     * "d" znači "slave hard disk na sekundarnom IDE kontroleru";
    
    Kod SCSI hard diskova, "a" je "disk sa najnižim SCSI IDom", "b"
    je "drugi najniži SCSI ID", itd.
    
    "Windows ime" je slovo kojim je vaš hard disk označen pod Windowsom
    (prva particija prvog diska se zove "C:").

en: Tanzania
bs: Tanzanija

en: Computing FAT filesystem bounds
bs: Izračunavam granice FAT filesistema

en: 
    Backup Sources:
bs: 
    Izvori backup-a:

en: custom
bs: ručno izaberi

en: Content of the file
bs: Sadržaj datoteke

en: Authentication LDAP
bs: Autentikacijski LDAP

en: Let me pick any driver
bs: Dozvoli da sam odaberem drajver

en: Profile
bs: Profil

en: transmitted
bs: poslano

en: Palestine
bs: Palestina

en: %d comma separated strings
bs: %d stringova razdvojenih zarezom

en:  isdn
bs:  ISDN

en: Here is the full list of keyboards available
bs: Ovdje je puna lista svih dostupnih tastatura

en: Theme name
bs: Naziv teme

en: /_Help
bs: /_Pomoć

en: Choosing an arbitrary driver
bs: Slobodan izbor drajvera

en: Cook Islands
bs: Cook ostrva

en: Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines.
bs: Ovdje možete izabrati da li skeneri spojeni na ovaj računar trebaju biti dostupni udaljenim računarima i kojim računarima.

en: the width of the progress bar
bs: širina progresne trake

en: Formatting partition %s
bs: Formatiram particiju %s

en: Hostname required
bs: Potrebno ime računara

en: Unselect fonts installed
bs: Isključi instalirane fontove

en: Wheel
bs: Sa točkićem

en: Submit kernel version
bs: Pošalji verziju kernela

en: Cancel
bs: Odustani

en: Searching for configured scanners ...
bs: Tražim podešene skenere ...

en: Videocard
bs: Video kartica

en: 	Backups use tar and bzip2
bs: 	Backupi koriste tar i bzip2

en: Remove Selected
bs: Ukloni izabrano

en: /Autodetect _modems
bs: /Automatski prepoznaj _modeme

en: Remove printer
bs: Ukloni štampač

en: View Last Log
bs: Pogledaj zadnji log

en: Which services would you like to allow the Internet to connect to?
bs: Kojim servisima želite dozvoliti pristup sa Interneta?

en: Connection Type
bs: Vrsta konekcije

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
bs: Dobro došli u aplikaciju za podešavanje maila.
    
    Ovdje možete podesiti sistem obavještavanja.

en: Other
bs: Ostalo

en: Button 2 Emulation
bs: Emulacija 2 dugmeta

en: Please enter a package name.
bs: Molim navedite ime paketa.

en: Run chkrootkit checks
bs: Izvrši chkrootkit provjere

en: type1inst building
bs: type1inst kreiranje

en: choose image file
bs: izaberite image datoteku

en: Domain Admin User Name
bs: Korisničko ime domenskog administratora

en: There was an error while scanning for TV channels
bs: Došlo je do greške kod pretrage TV kanala

en: US keyboard (international)
bs: US tastatura (međunarodna)

en: Not installed
bs: Nije instaliran

en: Both Alt keys simultaneously
bs: Obje Alt tipke istovremeno

en: LAN connection
bs: LAN konekcija

en: /File/-
bs: /Datoteka/-

en: Italian
bs: Italijanska

en: Basic
bs: Manje opcija

en: Card IO
bs: IO kartice

en: when checked, owner and group won't be changed
bs: kada je uključeno, vlasnik i grupa se ne mogu promijeniti

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
bs: 
    Ova posebna Bootstrap
    particija je za
    dvojni boot vašeg sistema.

en: Please choose for each step whether it will replay like your install, or it will be manual
bs: Molim izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj instalaciji ili će se obaviti ručno

en: You can also decide here whether scanners on remote machines should be made available on this machine.
bs: Ovdje takođe trebate odlučiti da li ovaj računar treba koristiti skenere na udaljenim računarima.

en: 	-Network by FTP.
bs: 	-Mrežu preko FTPa.

en: Reports check result to tty
bs: Prijavi rezultate provjere na tty

en: You must enter a device or file name!
bs: Morate unijeti naziv uređaja ili datoteke!

en: /_Quit
bs: /_Izlaz

en: Graphics memory: %s kB
bs: Grafička memorija: %s kB

en: access to compilation tools
bs: pristup alatima za kompajliranje

en: Please select data to restore...
bs: Molim izaberite podatke za vraćanje...

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
bs: Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora (2048 sektora je dovoljno)
    na početku diska

en: Standard test page
bs: Standardna testna strana

en: Create
bs: Kreiraj

en: What
bs: Šta

en: There was an error ordering packages:
bs: Došlo je do greške pri naručivanju paketa:

en: Bulgarian (BDS)
bs: Bugarska (BDS)

en: Disable Server
bs: Onemogući server

en: Filesystem encryption key
bs: Ključ za kodiranje datotečnog sistema

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
bs: Molim unesite prvi broj od deset koji želite izmjeniti,
    ili samo pritisnite Enter za nastavak.
    Vaš izbor?

en: Save theme
bs: Snimi temu

en: Auto Install
bs: Auto instalacija

en: Network Configuration Wizard
bs: Čarobnjak za podešavanje mreže

en: Removable media automounting
bs: Automatsko montiranje izmjenjivog medija

en: Enter the directory to save:
bs: Unesite direktorij za spasiti:

en: Printing
bs: Štampa

en: There are no printers found which are directly connected to your machine
bs: Nema štampača koji su direktno povezani na ovaj računar

en: Create a new partition
bs: Napravi novu particiju

en: Driver:
bs: Drajver:

en: unknown
bs: nepoznat

en: Use fdisk
bs: Koristi fdisk

en: MOVE YOUR WHEEL!
bs: POMJERITE VAŠ TOČKIĆ!

en: sent:
bs: poslano:

en: Automatic IP
bs: Automatska IP

en: There you are. Installation is now complete and your GNU/Linux system is
    ready to use. Just click "%s" to reboot the system. The first thing you
    should see after your computer has finished doing its hardware tests is the
    bootloader menu, giving you the choice of which operating system to start.
    
    The "%s" button shows two more buttons to:
    
     * "%s": to create an installation floppy disk that will automatically
    perform a whole installation without the help of an operator, similar to
    the installation you just configured.
    
       Note that two different options are available after clicking the button:
    
        * "%s". This is a partially automated installation. The partitioning
    step is the only interactive procedure.
    
        * "%s". Fully automated installation: the hard disk is completely
    rewritten, all data is lost.
    
       This feature is very handy when installing a number of similar machines.
    See the Auto install section on our web site for more information.
    
     * "%s"(*): saves a list of the packages selected in this installation.
    To use this selection with another installation, insert the floppy and
    start the installation. At the prompt, press the [F1] key and type >>linux
    defcfg="floppy" <<.
    
    (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
    "mformat a:")
bs: To je to. Instalacija je sada završena i vaš GNU/Linux sistem je spreman
    za upotrebu. Samo kliknite na "%s" da restartujete sistem. Prva stvar
    koju ćete ugledati nakon što računar završi hardverske provjere je meni
    bootloadera, koji vam nudi izbor operativnog sistema koji želite pokrenuti.
    
    Dugme "%s" će vam ponuditi još dva dugmeta za:
    
     * "%s": da biste napravili instalacionu
    disketu koja će automatski izvršiti cijelu instalaciju bez intervencije
    operatora, sličnu instalaciji koju ste upravo konfigurisali.
    
       Obratite pažnju na dvije različite opcije koje su dostupne nakon
    klikanja na ovo dugme:
    
        * "%s". Ovo je djelomično automatizirana instalacija. Korak
    particioniranja je jedini interaktivni dio.
    
        * "%s". Potpuno automatska instalacija: hard disk je
    potpuno prepisan, svi podaci su izgubljeni.
    
       Ova mogućnost je vrlo prikladna kada instalirate nekoliko sličnih
    računara. Pogledajte odjeljak Automatska instalacija na našoj web stranici
    za više informacija.
    
     * "%s" (*): snima listu paketa koje ste izabrali u ovoj
    instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom,
    ubacite disketu i započnite instalaciju. Na upitu, pritisnite tipku [F1]
    i ukucajte >>linux defcfg="floppy" <<.
    
    (*) Potrebna vam je FAT-formatirana disketa (da biste je napravili pod
    GNU/Linuxom, kucajte "mformat a:")

en: Configuration of a remote printer
bs: Podešavanje udaljenog štampača

en: An online platform to respond to enterprise support needs.
bs: Online platforma koja odgovara potrebama vašeg preduzeća za podrškom.

en: URL should begin with 'ftp:' or 'http:'
bs: URL treba počinjati sa 'ftp:' ili 'http:'

en: Add a new rule at the end
bs: Dodaj novo pravilo na kraj

en: LiLo and Bootsplash themes installation successful
bs: Uspješna instalacija LiLo i Boot tema

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
bs: Takođe možete odlučiti da li štampači na udaljenim računarima trebaju biti automatski dostupni sa ovog računara.

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
bs: Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost ime2=vrijednost2 ...''.
    Na primjer, ``io=0x300 irq=7''

en: Quit without writing the partition table?
bs: Izlazite bez pisanja tabele particija?

en: On Hard Drive
bs: na hard disk

en: Installing packages...
bs: Instaliram pakete...

en: Dutch
bs: Holandska

en: The following packages need to be installed:
bs: Sljedeći paketi trebaju biti instalirani:

en: service setting
bs: postavke servisa

en: Custom
bs: Izaberi korisnike

en: Latvia
bs: Latvija

en: File is already used by another loopback, choose another one
bs: Datoteku već koristi drugi loopback, izaberite neku drugu

en: Read-only
bs: Samo za čitanje

en: Enable/Disable name resolution spoofing protection.  If
    "alert" is true, also reports to syslog.
bs: Uključi/isključi zaštitu od lažiranja rezolviranja imena.  Ako
    je aktivna opcija "alert", takođe prijavljuje u syslog.

en: No known driver
bs: Nema nijedan poznat drajver

en: If it is not the one you want to configure, enter a device name/file name in the input line
bs: Ako to nije onaj koji želite podesiti, uneiste naziv uređaja / naziv datoteke u ulaznu liniju

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
bs: Nije pronađena nijedna zvučna kartica na vašoj mašini. Molim provjerite da li je ispravno spojena zvučna kartica koja je podržana pod Linuxom.
    
    
    Možete posjetiti našu bazu hardvera na:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: Configure Local Area Network...
bs: Podesi Lokalnu mrežu...

en: Verify checksum of the suid/sgid files
bs: Provjeri checksum suid/sgid datoteka

en: Launch the sound system on your machine
bs: Pokreće zvučni sistem na vašem računaru

en: Run some checks against the rpm database
bs: Izvrši neke provjere rpm baze podataka

en: Execute
bs: Izvrši

en: Preparing printer database...
bs: Pripremam bazu podataka o štampačima...

en: Information
bs: Informacije

en: No network card
bs: Nema mrežne kartice

en: 3 buttons
bs: 3 dugmeta

en: Which filesystem do you want?
bs: Koji datotečni sistem želite?

en: Detailed information
bs: Detaljne informacije

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
bs: Podrazumjevane opcije štampača
    
    Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) ispravno podešeni. Obratite pažnju da za voma veliku kvalitetu / rezoluciju štampa može postati znatno sporija.

en: This floppy is not FAT formatted
bs: Ova disketa nije FAT formatirana

en: Configuring network
bs: Podešavam mrežu

en: This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used.
bs: Ova opcija će zapisati datoteke koje su promijenjene.  Tačno ponašanje ovisi o tome da li je izabran inkrementalni ili diferencijalni režim.

en: Graphic Card
bs: Grafička karta

en: Resizing Windows partition
bs: Smanjujem Windows particiju

en: Cameroon
bs: Kamerun

en: Provider dns 1 (optional)
bs: Provider dns 1 (opcionalno)

en: You can now partition %s.
    When you are done, don't forget to save using `w'
bs: Sada možete particionirati %s.
    Kada završite, ne zaboravite spasiti sa `w'

en: Saami (swedish/finnish)
bs: Saami (švedski/finski)

en: Close
bs: Zatvori

en: "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
bs: "%s": provjerite trenutni izbor države. Ako se ne nalazite ovdje,
    kliknite na dugme "%s" i izaberite neku drugu državu. Ako se vaša
    zemlja ne nalazi na listi, kliknite na dugme "%s" kako biste dobili
    listu svih država.

en: Calendar
bs: Kalendar

en: Restore Selected
    Catalog Entry
bs: Vrati izabrane
    stavke katologa

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
bs: Da biste koristili udaljeni lpd štampač, morate dati ime računara za printer server i ime štampača na tom serveru.

en: Iceland
bs: Island

en: Network & Internet Configuration
bs: Podešavanje mreže i Interneta

en: consolehelper missing
bs: nedostaje consolehelper

en: stopped
bs: zaustavljen

en: Whether the FPU has an irq vector
bs: Da li FPU ima IRQ vektor

en: Expand Tree
bs: Proširi stablo

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
bs: Stari "%s" drajver je na crnoj listi.
    
    Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.
    
    Stoga će novi drajver "%s" biti korišten tek nakon idućeg pokretanja sistema.

en: Expert Mode
bs: Ekspertni mod

en: Printer options
bs: Opcije štampača

en: Local Network adress
bs: Lokalna mrežna adresa

en: Backup your System files. (/etc directory)
bs: Backup sistemskih datoteka. (/etc direktorij)

en: Set the user umask.
bs: Podešava korisnički umask.

en: You now have the opportunity to download updated packages. These packages
    have been updated after the distribution was released. They may
    contain security or bug fixes.
    
    To download these packages, you will need to have a working Internet 
    connection.
    
    Do you want to install the updates ?
bs: Sada imate mogućnost da dobavite sa Interneta nove verzije paketa koji
    su izašli nakon što je distribucija objavljena. Među njima su sigurnosne zakrpe
    i ispravke bugova.
    
    Da biste izvršili download, potrebno je da podesite Internet konekciju.
    
    Da li želite instalirati update-ovane pakete ?

en: Samba Server
bs: Samba server

en: Australian Optus cable TV
bs: Australijska Optus kablovska TV

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
bs:   <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran

en: Zimbabwe
bs: Zimbabve

en: When
bs: Kada

en: You need the Alcatel microcode.
    Download it at:
    %s
    and copy the mgmt.o in /usr/share/speedtouch
bs: Potreban vam je Alcatel-ov mikrokod.
    Možete ga downloadovati na
    %s
    zatim kopirajte mgmt.o u /usr/share/speedtouch

en: Hour
bs: Sat

en: Second DNS Server (optional)
bs: Drugi DNS server (opcionalno)

en: Finland
bs: Finska

en: Color depth: %s
bs: Broj boja: %s

en: You can't unselect this package. It must be upgraded
bs: Ne možete isključiti ovaj paket. On mora biti unaprijeđen

en: Loading from floppy
bs: Učitavam sa diskete

en: Enable/Disable the logging of IPv4 strange packets.
bs: Uključi/isključi logiranje čudnih IPv4 paketa.

en: Slovenia
bs: Slovenija

en: Mouse test
bs: Testiranje miša

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
bs: Drakperm se koristi da pregledate datoteke koje se koriste radi promjene privilegija, vlasnika i grupa putem msec-a.
    Možete također stvoriti vaša vlastita pravila koja će prepisati ranije podešena pravila.

en: Enter a user
    %s
bs: Unesite korisnika
    %s

en: - PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids
bs: - PCI i USB uređaji: ovo će izlistati PCI/USB id-ove za; vendor, device, subvendor i subdevice

en: ProgressBar color selection
bs: Izbor boje trake napretka

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
bs: Ovo su trenutne opcije u vašem boot meniju.
    Možete dodati nove ili promijeniti postojeće.

en: Application Name
    or Full Path:
bs: Ime aplikacije
    ili puni put:

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
bs: Izvršava naredbe zakazane putem at komande u zadato vrijeme,
    te pokreće programe u pozadini kada je računar neopterećen.

en: Radio support:
bs: Podrška za radio:

en: Installing SANE packages...
bs: Instaliram SANE pakete...

en: Change type
bs: Promijeni tip

en: , USB printer #%s
bs: , USB štampač #%s

en: SILO Installation
bs: SILO instalacija

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
bs: Čestitamo, instalacija je završena.
    Uklonite boot medij i pritisnite Enter da restartujete računar.
    
    
    Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake Linuxa,
    pogledajte Errata koja je dostupna na:
    
    
    %s
    
    
    Informacije o podešavanju vašeg sistema su dostupne u poglavlju
    "Nakon instalacije" vašeg zvaničnog Mandrake Linux Priručnika za upotrebu.

en: paranoid
bs: paranoičan

en: Do not send mails when unneeded
bs: Ne šalji mailove kada nije potrebno

en: Your scanner(s) will not be available on the network.
bs: Vaši skeneri neće biti dostupni putem mreže.

en: Send mail report after each backup to:
bs: Pošalji mail izvještaj nakon svakog backupa na :

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
bs: Ovu komandu također možete koristiti u polju "Komanda za štampu" u dijalozima za štampu mnogih aplikacija. Ovdje nije potrebno navesti naziv datoteke jer tudatoteku obezbjeđuje sama aplikacija.

en: Resolution
bs: Rezolucija

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
bs: Da biste štampali na SMB štampač, morate dati ime SMB računara (Pažnja! Ono može biti različito od TCP/IP imena!) i eventualno IP adresu print servera, kao i share naziv štampača kojem želite pristupiti i korisničko ime, šifru i informacije o radnoj grupi.

en:  Enabling su only from members of the wheel group or allow su from any user.
bs:  Omogući su samo članovima wheel grupe ili dozvoli su svakom korisniku.

en: reconfigure
bs: rekonfiguriši

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
bs: Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,
    PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.

en: Shell timeout
bs: Istek vremena shella

en: Xinetd Service
bs: Xinetd servis

en: access to network tools
bs: pristup mrežnim alatima

en: Firmware-Upload for HP LaserJet 1000
bs: Upload firmware-a za HP LaserJet 1000

en: And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos.
bs: I naravno da potjerate vaš multimedijalni računar do krajnjih granica! Koristite najnoviji softver za slušanje muzike i audio datoteka, mijenjajte i organizujte vaše slike i fotografije.

en: Here is a list of all auto-detected printers.
bs: Ovdje je lista svih automatski prepoznatih štampača.

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
bs: Greška u instaliranju aboota, 
    da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?

en: Restore Selected
    Files
bs: Vrati izabrane
    datoteke

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
bs: %s već postoji, da ga obrišem?
    
    Upozorenje: Ako ste već jednom obavili ovaj proces, vjerovatno
    trebate očistiti unos iz liste autoriziranih ključeva na serveru.

en: Please fill or check the field below
bs: Molim ispunite ili provjerite polje ispod

en: Do you want to save /etc/fstab modifications
bs: Želite li spasiti izmjene u /etc/fstab ?

en: Boot Protocol
bs: Boot protokol

en: LVM-disks %s
bs: LVM-diskovi %s

en: The package %s is needed. Install it?
bs: Potreban je paket %s. Da li ga želite instalirati?

en: On boot
bs: Prilikom boota

en: Bus identification
bs: Identifikacija sabirnice (busa)

en: Vatican
bs: Vatikan

en: Please make a backup of your data first
bs: Predlažemo da najprije napravite backup vaših podataka

en: You have more than one hard drive, which one do you install linux on?
bs: Imate više od jednog hard diska. Na koji od njih želite instalirati Linux?

en: Eritrea
bs: Eritreja

en: Firmware needed
bs: Potreban je firmware

en: Remove List
bs: Pobriši listu

en: A customizable environment
bs: Prilagodljiva okolina

en: Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path.
bs: Neki protokoli, kao što je rsync, se mogu podesiti na serverskom kraju.  Umjesto korištenja puta direktorija, možete koristiti ime 'modula' za put servisa.

en: Morocco
bs: Maroko

en: Which printer model do you have?
bs: Koji model štampača imate?

en: Add a new printer
bs: Dodaj novi štampač

en:           All of your selected data have been
bs:           Svi vaši izabrani podaci su

en: <-- Delete
bs: <-- Obriši

en: chunk size
bs: veličina chunka

en: If set to "ALL", /etc/issue and /etc/issue.net are allowed to exist.
    
    If set to NONE, no issues are allowed.
    
    Else only /etc/issue is allowed.
bs: Ako je postavljeno "SVE", dozvoljeno je postojanje /etc/issue i /etc/issue.net.
    
    Ako je postavljeno na NIŠTA, datoteke nisu dozvoljene.
    
    Inače, dozvoljen je samo /etc/issue.

en:  Enable/Disable sulogin(8) in single user level.
bs:  Uključi/isključi sulogin(8) na jednokorisničkom nivou.

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: commands before booting, or 'c' for a command-line.
bs: opcija prije bootanja, ili 'c' za komandnu liniju.

en: Problems installing package %s
bs: Problemi tokom instaliranja paketa %s

en: You will receive an alert if the load is higher than this value
bs: Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti

en: Add a scanner manually
bs: Ručno dodaj skener

en: Refresh
bs: Osvježi

en: Reload partition table
bs: Ponovo učitaj tabelu particija

en: Yes, I want autologin with this (user, desktop)
bs: Da, želim da se automatski prijavim sa ovim vrijednostima (korisnik, desktop)

en: Restore Selected
bs: Vrati izabrano

en: Search for fonts in installed list
bs: Pretraži fontove na listi instaliranih

en: The Local Network did not finish with `.0', bailing out.
bs: Lokalna mreža se ne završava sa `.0', izlazim.

en:  and the CD is in the drive
bs:  a CD je u pogonskoj jedinici

en: Tuner type:
bs: Vrsta tunera:

en: Now, it's time to select a printing system for your computer. Other OSs may
    offer you one, but Mandrake Linux offers two. Each of the printing system
    is best suited to particular types of configuration.
    
     * "%s" -- which is an acronym for ``print, don't queue'', is the choice
    if you have a direct connection to your printer, you want to be able to
    panic out of printer jams, and you do not have networked printers. ("%s"
    will handle only very simple network cases and is somewhat slow when used
    with networks.) It's recommended that you use "pdq" if this is your first
    experience with GNU/Linux.
    
     * "%s" - `` Common Unix Printing System'', is an excellent choice for
    printing to your local printer or to one halfway around the planet. It is
    simple to configure and can act as a server or a client for the ancient
    "lpd " printing system, so it compatible with older operating systems
    which may still need print services. While quite powerful, the basic setup
    is almost as easy as "pdq". If you need to emulate a "lpd" server, make
    sure you turn on the "cups-lpd " daemon. "%s" includes graphical
    front-ends for printing or choosing printer options and for managing the
    printer.
    
    If you make a choice now, and later find that you don't like your printing
    system you may change it by running PrinterDrake from the Mandrake Control
    Center and clicking the expert button.
bs: Sada je vrijeme da izaberete sistem štampe za vaš računar. Drugi OSi
    vam možda nude jedan, ali Mandrake Linux nudi dva. Svaki od ovih sistema
    je najbolji za određenu vrstu konfiguracije.
    
    * "%s" -- skraćeno za ''štampaj i nemoj stavljati u red'' (print, don't
    queue) je najbolji izbor ako imate direktnu vezu na štampač, želite izlaz
    za paniku u slučajevima zaglavljivanja papira i nemate mrežne štampače.
    ("%s" može riješiti samo vrlo jednostavne mrežne slučajeve i pomalo je
    spor kada se koristi sa mrežama.) Preporučujemo da koristite "pdq" ako
    je ovo vaše prvo iskustvo sa GNU/Linuxom.
    
    * "%s" - ''Common Unix Printing System'' (uobičajeni UNIX sistem štampe)
    je odličan izbor za štampanje na štampač koji se nalazi lokalno ili s druge
    strane planete. Vrlo ga je jednostavno podesiti i može služiti kao server ili
    klijent za prastari "lpd" sistem štampe, tako da je kompatibilan sa starijim
    operativnim sistemima kojima možda još trebaju usluge štampanja. Mada je
    vrlo moćan, osnovno podešavanje je skoro jednako lagano kao za "pdq".
    Ako želite simulirati "lpd" server, provjerite da li ste pokrenuli "cups-lpd"
    servis. "%s" uključuje grafičke alate za štampanje ili izbor opcija štampača,
    te za upravljanje štampačem.
    
    Ako sada napravite izbor, pa kasnije zaključite da vam se ne sviđa izabrani
    sistem štampe, možete ga promijeniti pokretanjem PrinterDrake iz Mandrake
    Kontrolnog centra i klikanjem na dugme Ekspert.

en: "Menu" key
bs: "Meni" tipka

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or "Raw printer" is highlighted.
bs: 
    
    Molim provjerite da li je Printerdrake izvršio ispravno automatsko prepoznavanje modela vašeg štampača. Potražite ispravan model na listi ako kursor stoji na pogrešnom modelu ili na "Raw štampač".

en: Security Administrator:
bs: Sigurnosni administrator:

en: Set the shell timeout. A value of zero means no timeout.
bs: Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena.

en: Firmware copy succeeded
bs: Kopiranje firmware-a uspjelo

en: if set to yes, check permissions of files in the users' home.
bs: ako je postavljeno na da, provjerava privilegije datoteka u korisničkom home-u.

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
bs: Nemate nijednu Internet konekciju.
    Napravite jednu klikajući na 'Podesi'

en: Fonts copy
bs: Kopiranje fontova

en: Automated
bs: Automatizovano

en: Do you want to test the configuration?
bs: Želite li testirati konfiguraciju?

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
bs: Štampač "%s" je uspješno uklonjen iz Star/Open Offica.

en: Save packages selection
bs: Spasi izbor paketa

en: /_Actions
bs: /_Akcije

en: Remove the last item
bs: Ukloniti zadnju stavku

en: User list to restore (only the most recent date per user is important)
bs: Lista korisnika za vraćanje (samo najsvježiji datum po korisniku je značajan)

en: No net boot images created!
bs: Nije napravljena boot image!

en: use pptp
bs: koristi pptp

en: Choose which services should be automatically started at boot time
bs: Izaberite koji servisi se trebaju pokretati automatski prilikom boota

en: Check files/directories writable by everybody
bs: Provjeri datoteke/direktorije koje svako može pisati

en: Learn how to use this printer
bs: Saznaj kako koristiti ovaj štampač

en: Configure the network now
bs: Sada podesite mrežu

en: Choose a mirror from which to get the packages
bs: Izaberite mirror sa kojeg će biti dobavljeni paketi

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
bs: FAT resizer ne može izmijeniti vašu particiju, 
    došlo je do sljedeće greške: %s

en: Size:
bs: Veličina:

en: Which sector do you want to move it to?
bs: Na koji sektor je želite premjestiti?

en: Bahamas
bs: Bahami

en: Do you want to click on this button?
bs: Da li želite kliknuti na ovo dugme?

en: Manual configuration
bs: Ručno podešavanje

en: search
bs: pretraživanje

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
bs: Ovaj paket učitava izabranu mapu tastature kao što je podešeno u
    /etc/sysconfig/keyboard, što se može podesiti korištenjem kbdconfig
    programa. Ovaj servis biste trebali ostaviti uključenim na većini računara.

en: Zeroconf host name must not contain a .
bs: Zeroconf ime računara ne smije sadržavati .

en:  Accept/Refuse icmp echo.
bs:  Prihvati/odbij ICMP eho.

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
bs: Syslog je sistem pomoću kojeg mnogi servisi zapisuju poruke
    u razne sistemske dnevnike (logove).  Pametno je uvijek imati pokrenuti syslog.

en: Unknown/Others
bs: Nepoznat/Ostali

en: No TV Card detected!
bs: Nije detektovana TV kartica!

en: Options
bs: Opcije

en: The printer "%s" is set as the default printer now.
bs: Štampač "%s" je sada podešen kao podrazumjevani štampač.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
bs: Sada podešavate OK laserski winprinter. Ovi štampači
    koriste jedan poseban komunikacijski protokol i stoga rade samo kada su spojeni na prvom paralelnom portu. Ako je vaš štampač spojen na neki drugi port ili na print server molim spojite štampač na prvi paralelni port prije nego što odštampate testnu stranicu. Inače štampač neće raditi. Drajver će ignorisati vaše podešenje tipa konekcije.

en: generation of the cpu (eg: 8 for PentiumIII, ...)
bs: generacija procesora (npr: 8 za PentiumIII, ...)

en: Auto-detected
bs: Auto prepoznat

en: You are about to configure your computer to install a PXE server as a DHCP server
    and a TFTP server to build an installation server.
    With that feature, other computers on your local network will be installable using this computer as source.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
bs: Sada ćete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP servera) i TFTP servera.
    Sa ovom opcijom, moći ćete instalirati Mandrake Linux na druge računare na vašoj lokalnoj mreži koristećiovaj računar kao izvor.
    
    Prije nego što nastavite, provjerite da li ste podesili mrežni/internet pristup koristeći drakconnect.
    
    Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu mrežu (LAN).

en: OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.
    What's more, OSS drivers all reinvent the wheel.
    
    ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
    supports quite a large range of ISA, USB and PCI cards.
    
    It also provides a much higher API than OSS.
    
    To use alsa, one can either use:
    - the old compatibility OSS api
    - the new ALSA api that provides many enhanced features but requires using the ALSA library.
bs: OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od operativnog sistema (dostupan je na većini UNIX(tm) sistema), ali je vrlo elementaran i ograničen.
    Pored toga, svi OSS drajveri ponovo izmišljaju točak.
    
    ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja
    podržava prilično velik broj ISA, USB i PCI kartica.
    
    Ona takođe pruža mnogo viši API nego OSS.
    
    Da biste koristili ALSA, možete koristiti:
    - stari API kompatibilan sa OSSom
    - novi ALSA API koji pruža mnoge napredne mogućnosti, ali zahtijeva upotrebu ALSA biblioteke.

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
bs: Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap particiju u DiskDrake-u

en: Please choose the printer you want to set up or enter a device name/file name in the input line
bs: Molim izaberite štampač koji želite podesiti ili unesite naziv uređaja / naziv datoteke na ulaznoj liniji

en: Refuse
bs: Odbij

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
bs: HardDrake ispituje hardware i eventualno podešava novi ili
    izmjenjeni hardware.

en: Creating and formatting file %s
bs: Kreiram i formatiram datoteku %s

en: if set to yes, check additions/removals of sgid files.
bs: ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka.

en: The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
bs: Za štampač HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice (firmware koji se nalazi na CDu koji je došao uz štampač ne radi) i izvadite firmware datoteku. Ovo ćete uraditi tako što ćete raspakovati samoraspakujuću '.exe' datoteku koristeći 'unzip' alat, te potražiti datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. Ovdje će je automatski pronaći uploader skripta i poslati štampaču svaki put kada štampač bude spojen i upaljen.

en: Choose an existing LVM to add to
bs: Izaberite postojeći LVM na koji ćete dodati

en: xfs restart
bs: restart xfs-a

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
bs: Štampač "%s" već postoji,
    da li sigurno želite prepisati ovu konfiguraciju?

en: Use the scanners on hosts:
bs: Koristi skenere na računaru:

en: Unselected All
bs: Ništa izabrano

en: No partition available
bs: Nema dostupnih particija

en: Printer Management
bs: Upravljanje štampačima

en: Encryption key (again)
bs: Ključ enkripcije (još jednom)

en: Samba share name missing!
bs: Naziv samba share-a nedostaje!

en: True Type install done
bs: Završena True Type instalacija

en: Detection in progress
bs: Detekcija u toku

en: Build Whole Kernel -->
bs: Izgradi cijeli kernel -->

en: Welcome to %s
bs: Dobro došli u %s

en:  drakhelp 0.1
    Copyright (C) 2003 MandrakeSoft.
    This is free software and may be redistributed under the terms of the GNU GPL.
    
    Usage:
bs:  drakhelp 0.1
    Copyright (C) 2003 MandrakeSoft.
    Ovo je slobodan softver i može se distribuirati pod uslovima GNU GPLa.
    
    Upotreba:

en: Please insert the Update Modules floppy in drive %s
bs: Molim ubacite disketu Update Modula u jedinicu %s

en: Bootsplash
bs: Boot ekran

en: The following printer
    
    %s%s
    is directly connected to your system
bs: Sljedeći štampač
    
    %s%s
    je direktno spojen na vaš sistem

en: Printer sharing on hosts/networks:
bs: Dijeljenje štampača na računarima/mrežama:

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
bs: 
    Komanda "%s" također omogućava izmjenu opcija za pojedinačni zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. "%s <datoteka>".

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
bs: U nekim slučajevima, %s drajver treba imati dodatne informacije za
    ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke
    ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve
    informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,
    ali ne bi trebalo izazvati nikakvu štetu.

en: Not the correct CD label. Disk is labelled %s.
bs: Neispravna oznaka CDa. Oznaka diska je %s.

en: 
    - Daemon, %s via:
bs: 
    - Demon (%s) preko:

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
bs: Dobrodošli u alat za Dijeljenje Internet konekcije!
    
    %s
    
    Kliknite na Podesi da pokrenete čarobnjak.

en: Cuba
bs: Kuba

en: October
bs: Oktobar

en: Searching for new printers...
bs: Tražim nove štampače...

en:  (multi-session)
bs:  (više sesija)

en: Kernel Boot Timeout
bs: Vrijeme za boot kernela

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
bs: Vaša kartica može imati podršku za 3D hardversko ubrzanje ali samo sa
    XFree %s. Vašu karticu takođe podržava XFree %s koji može imati bolju podršku za 2D.

en:  Activate/Disable daily security check.
bs:  Aktiviraj/isključi dnevnu sigurnosnu provjeru.

en: Enable libsafe if libsafe is found on the system
bs: Uključi libsafe ako libsafe postoji na vašem sistemu

en: The DrakX Partitioning wizard found the following solutions:
bs: DrakX Particioni čarobnjak je našao sljedeća rješenja:

en: Hungarian
bs: Mađarska

en: Select your provider.
    If it isn't listed, choose Unlisted.
bs: Izaberite vašeg providera.
     Ako nije na listi, izaberite Nije na listi

en: Automatic time synchronization (using NTP)
bs: Automatska sinhronizacija vremena (koristeći NTP)

en: Use my Windows partition
bs: Koristi moju Windows particiju

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
bs: PCMCIA podrška služi za ispravan rad uređaja kao što su mrežne
    kartice i modemi, priključenih na PCMCIA port (obično na laptopima).
    Neće se pokrenuti sve dok nije ispravno konfigurisan, tako da je
    sigurno imati ga instaliranog i na računarima kojima nije potreban.

en: Choose your country
bs: Izaberite vašu državu

en: 
    - System Files:
bs: 
    - sistemske datoteke:

en: Standalone Tools
bs: Samostalni alati

en: Where
bs: Gdje

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
bs: Ovdje možete izabrati alternativni drajver (ili OSS ili ALSA) za vašu zvučnu karticu (%s).

en: Configuring PCMCIA cards...
bs: Podešavam PCMCIA kartice...

en: kdesu missing
bs: nedostaje kdesu

en: %s: %s requires a username...
bs: %s: %s traži korisničko ime...

en: Encryption key
bs: Ključ enkripcije

en: This setting will be activated after the installation.
    During installation, you will need to use the Right Control
    key to switch between the different keyboard layouts.
bs: Ova postavka će biti aktivirana nakon instalacije.
    Tokom instalacije, trebate koristiti desnu Control
    tipku da prebacujete između raznih rasporeda tastature.

en: Christmas Island
bs: Uskršnje ostrvo

en: Installation of bootloader failed. The following error occured:
bs: Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:

en: Set this printer as the default
bs: Podesi štampač kao podrazumjevani

en: Verify that %s is the correct path
bs: Provjerite da li je %s ispravan put?

en: partition %s
bs: particiji %s

en: Paranoid
bs: Paranoičan

en: <-- Del User
bs: <-- Obriši korisnika

en: Location on the bus
bs: Lokacija na sabirnici

en: No printer found!
bs: Nije pronađen nijedan štampač!

en: the vendor name of the device
bs: naziv proizvođača uređaja

en: Erase entire disk
bs: Pobriši čitav disk

en: Automatic reconfiguration
bs: Automatsko ponovno podešavanje

en: Receiving Speed:
bs: Brzina prijema:

en: Turks and Caicos Islands
bs: Turks i Caicos ostrva

en: No Ip
bs: Bez IP

en: <- Previous
bs: <- Nazad

en: Transfer Now
bs: Prebaci odmah

en: Set root password and network authentication methods
bs: Podesi root šifru i metodu mrežne autentikacije

en: Internet Connection Sharing configuration
bs: Podešavanje dijeljenja Internet konekcije

en: Toggle between flat and group sorted
bs: Ravno / složeno po grupama

en: Themes
bs: Teme

en: Options: %s
bs: Opcije: %s

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
bs: Trenutno koristite %s kao boot manager.
    Kliknite na Podesi kako bi se pokrenuo čarobnjak za podešavanje.

en: OKI winprinter configuration
bs: Podešavanje OKI winprinter-a

en: Parallel port #%s
bs: Paralelni port #%s

en: Security Level
bs: Sigurnosni nivo

en: Some steps are not completed.
    
    Do you really want to quit now?
bs: Neki koraci nisu dovršeni.
    
    Da li zaista želite izaći sada?

en: Polish (qwertz layout)
bs: Poljska (qwertz)

en: Syria
bs: Sirija

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
bs: Da li je vaš štampač multifunkcijski uređaj od HPa ili Sony-ja (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 sa skenerom, DeskJet 450, Sony IJP-V100), ili HP PhotoSmart ili HP LaserJet 2200?

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
bs: Dobro došli u %s izbornik operativnog sistema!
    
    Izaberite operativni sistem na listi gore ili
    sačekajte %d sekundi do pokretanja podrazumjevanog OSa.

en: Portuguese
bs: Portugalska

en: Loopback file name:
bs: Naziv loopback datoteke:

en: DNS server address should be in format 1.2.3.4
bs: Adresa DNS servera treba biti u formatu 1.2.3.4

en: Left Control key
bs: Lijeva Control tipka

en: Serbia
bs: Srbija

en: Newzealand
bs: Novi Zeland

en: This directory should remain within the root filesystem
bs: Ovaj direktorij treba ostati unutar korijenskog file sistema

en: Across Network
bs: preko mreže

en: CapsLock key
bs: CapsLock tipka

en: Install bootloader
bs: Instalacija bootloadera

en: Select the memory size of your graphics card
bs: Izaberite veličinu memorije vaše grafičke karte

en: Enable/Disable crontab and at for users.
    
    Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)
    and crontab(1)).
bs: Uključi/isključi crontab i at za korisnike.
    
    Stavi korisnicima kojima je to dozvoljeno u /etc/cron.allow i /etc/at.allow (vidi man stranice at(1) i crontab(1)).

en: [OPTIONS]
    Network & Internet connection and monitoring application
    
    --defaultintf interface : show this interface by default
    --connect : connect to internet if not already connected
    --disconnect : disconnect to internet if already connected
    --force : used with (dis)connect : force (dis)connection.
    --status : returns 1 if connected 0 otherwise, then exit.
    --quiet : don't be interactive. To be used with (dis)connect.
bs: [OPTIONS]
    Aplikacija za povezivanje na mrežu/Internet i nadzor veze
    
    --defaultintf interface : podesi podrazumijevani interfejs
    --connect : spoji se na Inernet, ako nisi već spojen
    --disconnect : prekini vezu s Internetom, ako si spojen
    --force : koristi se sa (dis)connect : prinudi operaciju.
    --status : vraća 1 ako je spojen, u suprotnom 0.
    --quiet : bez interaktivnosti. Koristi se sa (dis)connect.

en: Dynamic IP Address Pool:
bs: Raspon dinamičkih IP adresa:

en: LVM name?
bs: Naziv LVMa?

en: Some devices in the "%s" hardware class were removed:
bs: Uklonjeni su neki uređaji u "%s" klasi hardvera:

en: Found %s %s interfaces
bs: Pronađeno %s %s interfejsa

en: The internal domain name
bs: Interno domensko ime

en: Card IRQ
bs: IRQ kartice

en: Font Importation and monitoring application                                     
    --windows_import : import from all available windows partitions.
    --xls_fonts      : show all fonts that already exist from xls
    --strong         : strong verification of font.
    --install        : accept any font file and any directry.
    --uninstall      : uninstall any font or any directory of font.
    --replace        : replace all font if already exist
    --application    : 0 none application.
                     : 1 all application available supported.
                     : name_of_application like  so for staroffice 
                     : and gs for ghostscript for only this one.
bs: Aplikacija za uvoz i nadzor fontova                                     
    --windows_import : uvezi sa dostupnih windows particija.
    --xls_fonts      : prikaži sve postojeće fontove koje prijavljuje xls
    --strong         : jaka provjera fonta.
    --install        : instaliraj bilo koji font ili direktorij.
    --uninstall      : deinstaliraj bilo koji font ili direktorij.
    --replace        : zamijeni font ako vec postoji
    --application    : 0 bez aplikacija.
                     : 1 podrška za sve poznate aplikacije.
                     : ime_aplikacije kao  so za staroffice 
                     : i gs za ghostscript za samo tu aplikaciju.

en: Choose the floppy drive you want to use to make the bootdisk
bs: Izaberite disketnu jedinicu koju želite koristiti da napravite boot disketu

en: LILO with text menu
bs: LILO sa tekstualnim menijem

en: Everything (no firewall)
bs: Sve (bez firewalla)

en: You must specify a kernel image
bs: Morate navesti image kernela

en: , multi-function device on USB
bs: , višenamjenski uređaj na USBu

en: Do
bs: Uradi

en: Contacting the mirror to get the list of available packages...
bs: Kontaktiram mirror da bih saznao listu dostupnih paketa...

en: Lithuanian AZERTY (old)
bs: Litvanska AZERTY (stara)

en: Brazilian (ABNT-2)
bs: Brazilska (ABNT-2)

en: IP address of host/network:
bs: IP adresa računara/mreže:

en: the progress bar y coordinate
    of its upper left corner
bs: koordinate progresne trake y
    tj. njenog lijevog ugla

en: System installation
bs: Instalacija sistema

en: Allow/Forbid reboot by the console user.
bs: Dozvoli/zabrani restartovanje računara iz konzole.

en: /File/_Open
bs: /Datoteka/_Otvori

en: Location of auto_install.cfg file
bs: Lokacija datoteke auto_install.cfg

en: Open Firmware Delay
bs: Čekanje na Open Firmware

en: Hungary
bs: Mađarska

en: New Zealand
bs: Novi Zeland

en: Color configuration
bs: Podešavanje boje

en: There are already some restrictions, and more automatic checks are run every night.
bs: Već postoje određena ograničenja, a više automatskih provjera se pokreće svaku noć.

en: please choose the date to restore
bs: molim izaberite datum za vraćanje

en: Netherlands Antilles
bs: Nizozemski Antili

en: Switching from ext2 to ext3
bs: Prebacujem sa ext2 na ext3

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
bs: 
    Dobro došli u Čarobnjak za podešavanje štampača
    
    Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene štampače koji će biti korišteni sa ovog računara, a također i sa drugih računara na mreži.
    
    On će od vas tražiti sve potrebne informacije kako bi štampač bio podešen, a vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama konekcije štampača.

en: and %d unknown printers
bs: i %d nepoznatih štampača

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
bs: Rani Intel Pentium procesori imaju bug u numeričkom koprocesoru koji ne postiže potrebnu preciznost prilikom izvršavanja dijeljenja sa tekućim zarezom (FDIV)

en: Backup quota exceeded!
    %d MB used vs %d MB allocated.
bs: Backup kvota je prekoračena!
    Iskorišteno je %d MB od alociranih %d MB.

en: No ISDN PCI card found. Please select one on the next screen.
bs: Nije pronađena nijedna ISDN PCI kartica. Molim izaberite jednu na idućem ekranu.

en: Please give a user name
bs: Molim navedite korisničko ime

en: Enable CD Boot?
bs: Omogući boot sa CDa?

en:  enter `void' for void entry
bs:  unesite `void' za prazan unos

en: Backups on unmountable media - Use Catalog to restore
bs: Backupi na mediju koji se ne može montirati - Koristite Katalog za vraćanje

en: January
bs: Januar

en: Password history length
bs: Dužina historije šifara

en: Winmodem connection
bs: Winmodem konekcija

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
bs: 
    Čestitamo, vaš štampač je sada instaliran i podešen!
    
    Možete štampati koristeći komandu "Štampaj" u vašoj aplikaciji (obično se nalazi u meniju "Datoteka).
    
    Ako želite dodati, ukloniti ili promijeniti ime štampača, ili ako želite promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta štampe...), izaberite opciju "Štampač" u "Hardware" sekciji Mandrake Kontrolnog centra.

en: Now, you can run xawtv (under X Window!) !
bs: Sada možete pokrenuti xawtv (pod X Window sistemom!) !

en: Not enough swap space to fulfill installation, please add some
bs: Nemam dovoljno swap prostora da dovršim instalaciju, molim dodajte još

note: -PO: example: lilo-graphic on /dev/hda1
en: %s on %s
bs: %s na %s

en: Allow/Forbid remote root login.
bs: Dozvoli/zabrani prijavu kao root sa udaljenog računara

en: GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to
    local time according to the time zone you selected. If the clock on your
    motherboard is set to local time, you may deactivate this by unselecting
    "%s", which will let GNU/Linux know that the system clock and the
    hardware clock are in the same timezone. This is useful when the machine
    also hosts another operating system like Windows.
    
    The "%s" option will automatically regulate the clock by connecting to a
    remote time server on the Internet. For this feature to work, you must have
    a working Internet connection. It is best to choose a time server located
    near you. This option actually installs a time server that can used by
    other machines on your local network as well.
bs: GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga
    u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je
    sat na vašoj matičnoj ploči podešen na lokalno vrijeme, možete isključiti ovu
    opciju isključujući "%s", što će saopštiti
    GNU/Linuxu da su sistemski sat i hardverski sat u istoj vremenskoj zoni.
    Ovo je korisno kada se na računaru takođe nalazi i drugi operativni sistem
    kao što je Windows.
    
    Opcija "%s" će automatski regulisati sat
    spajajući se na udaljeni time server na Internetu. Kako bi ova mogućnost
    radila, morate imati ispravnu Internet konekciju. Najbolje je izabrati time
    server negdje u vašoj blizini. Ova opcija će ustvari instalirati time server
    koji mogu koristiti i drugi računari u vašoj lokalnoj mreži.

en: Which is your timezone?
bs: Koja je vaša vremenska zona?

en: Can't create log file!
bs: Ne mogu napraviti log datoteku!

en: Use .backupignore files
bs: Koristi .backupignore datoteke

en: Guinea
bs: Gvineja

en: The system is now connected to the Internet.
bs: Sistem je sada spojen na Internet.

en: South Georgia and the South Sandwich Islands
bs: South Georgia i South Sandwich ostrva

en: Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
bs: Monitor
    
       Instalacioni program obično može prepoznati i podesiti monitor koji
    je povezan na vaš računar. Ako se ovo ne desi, možete odabrati sa ove
    liste monitor koji je ustvari povezan na vaš računar.

en: Mozambique
bs: Mozambik

en: Icon
bs: Ikona

en: Please choose what you want to backup
bs: Molim izaberite šta želite backupovati

en: 256 colors (8 bits)
bs: 256 boja (8 bita)

en: Read-write
bs: Čitaj-piši

en: Size: %s
bs: Veličina: %s

en: Add a rule
bs: Dodaj pravilo

en: Chunk size %s
bs: Veličina chunka %s

en: Build the future of Linux!
bs: Izgradite budućnost Linuxa!

en: Local Printer
bs: Lokalni štampač

en: Floppy access error, unable to mount device %s
bs: Greška pri pristupu disketi, ne mogu montirati uređaj %s

en: [--file=myfile] [--word=myword] [--explain=regexp] [--alert]
bs: [--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]

en: ADSL connection
bs: ADSL konekcija

en: No configuration, please click Wizard or Advanced.
bs: Bez podešavanja, molim kliknite na Čarobnjak ili Više opcija.

en: Error!
bs: Greška!

en: cable connection detected
bs: otkrivena kablovska konekcija

en: Permission denied transferring %s to %s
bs: Pristup odbijen pri prenosu %s na %s

en: /_Report Bug
bs: /_Prijavi grešku

en: Dominica
bs: Dominika

en: Resize
bs: Smanji

en: Resolution: %s
bs: Rezolucija: %s

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
bs: Ne mogu pristupiti kernelskim modulima koji odgovaraju vašem kernelu (nedostaje datoteka %s), što obično znači da je vaša boot disketa zastarjela u odnosu na instalacioni medij (napravite noviju boot disketu)

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
bs: Molim izaberite ispravan port. Na primjer, "COM1" port pod Windows
    operativnim sistemom, pod GNU/Linuxom se zove "ttyS0" .

en: The following packages are going to be removed
bs: Sljedeći paketi će biti uklonjeni

en: Connect to the Internet
bs: Spoji se na Internet

en: Use existing partitions
bs: Koristi postojeću particiju

en: Canadian (Quebec)
bs: Kanadska (Kvebek)

en: Mouse device: %s
bs: Uređaj miša: %s

en: Reselect correct fonts
bs: Ponovo izaberi ispravne fontove

en: Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
bs: Opcije
    
       Ovdje možete izabrati da li želite da vaš računar automatski pređe na
    grafički interfejs nakon uključivanja. Očito, trebate odgovoriti "%s" ako
    će vaš računar imati ulogu servera ili ako imate problema sa
    podešavanjem ekrana.

en:  [everything]
           XFdrake [--noauto] monitor
           XFdrake resolution
bs:  [everything]
           XFdrake [--noauto] monitor
           XFdrake rezolucija

en: Write protection
bs: Zaštita od pisanja

en: You've not selected any font
bs: Niste izabrali nijedan font

en: Language
bs: Jezik

en: Printer model selection
bs: Izbor modela štampača

en: After changing type of partition %s, all data on this partition will be lost
bs: Nakon promjene tipa particije %s, svi podaci na toj particiji će biti izgubljeni

en: %d seconds
bs: %d sekundi

en: Insert a blank floppy in drive %s
bs: Ubacite praznu disketu u jedinicu %s

en: A valid URI must be entered!
bs: Trebate unijeti ispravan URI!

en: Found "%s" interface do you want to use it ?
bs: Pronašao sam interfejs "%s". Želite li ga koristiti ?

en: Re-configure interface and DHCP server
bs: Ponovo podesi interfejs i DHCP server

en: Sound configuration
bs: Podešavanje zvuka

en: Photo test page
bs: Foto testna strana

en: Custom disk partitioning
bs: Ručno particioniranje diska

en: Enter Printer Name and Comments
bs: Unesite ime štampača i komentare

en: The following printers
    
    %s%s
    are directly connected to your system
bs: Sljedeći štampači
    
    %s%s
    su direktno spojeni na vaš sistem

en: You don't have any winmodem
bs: Nemate winmodem

en: type: %s
bs: tip: %s

en: Slovakian (QWERTY)
bs: Slovačka (QWERTY)

en: This should be a comma-separated list of local users or email addresses that you want the backup results sent to. You will need a functioning mail transfer agent setup on your system.
bs: Ovo bi trebala biti lista lokalnih korisnika razdvojenih zarezom ili email adresa kojima želite poslati rezultate backupa. Biće vam potreban ispravno podešen mail transfer agent na vašem sistemu.

en: No Sound Card detected!
bs: Nije izabrana zvučna kartica!

en: Mouse Port
bs: Port miša

en: Check for unsecured accounts
bs: Provjeri neupotrijebljene račune

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
bs: Morate restartovati Display Manager da bi izmjene stupile na snagu. 
    (na konzoli restartujte dm servis)

en: Ftp Server
bs: FTP server

en: %s fonts conversion
bs: konverzija %s fontova

en: the type of bus on which the mouse is connected
bs: vrsta sabirnice na koju je spojen miš

en: As a review, DrakX will present a summary of information it has about your
    system. Depending on your installed hardware, you may have some or all of
    the following entries. Each entry is made up of the configuration item to
    be configured, followed by a quick summary of the current configuration.
    Click on the corresponding "%s" button to change that.
    
     * "%s": check the current keyboard map configuration and change that if
    necessary.
    
     * "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
    
     * "%s": By default, DrakX deduces your time zone based on the country
    you have chosen. You can click on the "%s" button here if this is not
    correct.
    
     * "%s": check the current mouse configuration and click on the button to
    change it if necessary.
    
     * "%s": clicking on the "%s" button will open the printer
    configuration wizard. Consult the corresponding chapter of the ``Starter
    Guide'' for more information on how to setup a new printer. The interface
    presented there is similar to the one used during installation.
    
     * "%s": if a sound card is detected on your system, it is displayed
    here. If you notice the sound card displayed is not the one that is
    actually present on your system, you can click on the button and choose
    another driver.
    
     * "%s": by default, DrakX configures your graphical interface in
    "800x600" or "1024x768" resolution. If that does not suit you, click on
    "%s" to reconfigure your graphical interface.
    
     * "%s": if a TV card is detected on your system, it is displayed here.
    If you have a TV card and it is not detected, click on "%s" to try to
    configure it manually.
    
     * "%s": if an ISDN card is detected on your system, it will be displayed
    here. You can click on "%s" to change the parameters associated with the
    card.
    
     * "%s": If you want to configure your Internet or local network access
    now.
    
     * "%s": this entry allows you to redefine the security level as set in a
    previous step ().
    
     * "%s": if you plan to connect your machine to the Internet, it's a good
    idea to protect yourself from intrusions by setting up a firewall. Consult
    the corresponding section of the ``Starter Guide'' for details about
    firewall settings.
    
     * "%s": if you wish to change your bootloader configuration, click that
    button. This should be reserved to advanced users.
    
     * "%s": here you'll be able to fine control which services will be run
    on your machine. If you plan to use this machine as a server it's a good
    idea to review this setup.
bs: DrakX će vam pružiti sažetak raznih informacija koje su prikupljene
    o vašem sistemu. Ovisno o instaliranom hardveru, vjerovatno imate
    neke ili sve od navedenih stavki. Pojedinačna stavka se sastoji od
    onoga što je potrebno podesiti, nakon čega slijedi kraći sažetak trenutne
    konfiguracije. Da biste ovo izmijenili, kliknite na odgovarajuće dugme "%s".
    
    * "%s": provjerite trenutnu mapu tastature i izmijenite je ako je
    potrebno.
    
    * "%s": provjerite trenutno izabranu državu. Ako se nalazite negdje
    drugo, kliknite na dugme "%s" i izaberite neku drugu. Ako se vaša
    zemlja ne nalazi na prikazanoj listi, kliknite na dugme "%s" da biste
    dobili cjelokupnu listu zemalja.
    
    * "%s": DrakX automatski određuje vašu vremensku zonu
    na osnovu države koju ste izabrali. Možete kliknuti na dugme "%s"
    ako ovo nije ispravno.
    
    * "%s": provjerite trenutnu konfiguraciju miša i klinite na dugme da je
    promijenite ako je to potrebno."
    
    * "%s": klikanjem na dugme "%s" otvoriće se čarobnjak za
    podešavanje štampača. Pogledajte odgovarajuće poglavlje ''Vodiča za
    početnike'' za više informacija o podešavanju novog štampača. Interfejs
    koji je tamo prikazan je sličan onom koji će biti korišten tokom instalacije.
    
    * "%s": ako je na vašem sistemu otkrivena zvučna kartica, ona će
    biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona
    koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki
    drugi drajver.
    
    * "%s": DrakX će podesiti vaš grafički interfejs za rad na
    rezoluciji "800x600" ili "1024x768". Ako vam to ne odgovara, kliknite
    na dugme "%s" kako biste drugačije podesili vaš interfejs.
    
    * "%s": ako je na vašem sistemu prepoznata TV kartica, biće
    prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na
    dugme "%s" kako biste pokušali podesiti je ručno.
    
    * "%s": ako je na vašem sistemu otkrivena ISDN kartica, ona
    će biti prikazana ovdje. Možete kliknuti na dugme "%s" da promijenite
    parametre vezane za nju.
    
    * "%s": ako želite, možete podesiti vaš Internet pristup ili pristup
    lokalnoj mreži.
    
    * "%s": ovdje možete promijeniti nivo sigurnosti sistema koji
    je podešen ranije.
    
    * "%s": ako planirate povezati vaš računar na Internet, pametno je
    zaštititi ga od upada postavljanjem firewalla. Pogledajte odgovarajuće
    poglavlje ''Vodiča za početnike'' za detalje o podešavanju firewalla.
    
    * "%s": ako želite promijeniti postavke bootloadera, kliknite na to
    dugme. Ovo bi trebalo biti rezervisano za napredne korisnike.
    
    * "%s": ovdje možete fino podešavati koji servisi će biti pokrenuti
    na vašem računaru. Ako planirate koristiti ovaj računar kao server,
    dobra je ideja još jednom pregledati ove postavke.

en: Comoros
bs: Komori

en: May
bs: Maj

en: Yaboot mode
bs: Yaboot mod

en: Generic 3 Button Mouse
bs: Opšti miš sa 3 dugmeta

en: USA (cable)
bs: USA (kablovska)

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
bs: Ne mogu pokrenuti LiLo!
    Izvršite "lilo" kao root u komandnoj liniji da dovršite instalaciju LiLo teme.

en: Select another media to restore from
bs: Izaberite drugi medij za vraćanje

en: Software Manager
bs: Upravljanje programima

en: Re-submit
bs: Ponovo pošalji

en: CD in place - continue.
bs: CD na mjestu - nastavljam.

en: Network & Internet
bs: Mreža i Internet

en: Lithuanian "phonetic" QWERTY
bs: Litvanska "fonetska" QWERTY

en: Sharing of local scanners
bs: Dijeljenje lokalnih skenera

en: Plug'n Play probing failed. Please select the correct monitor
bs: Plug'n'Play probanje nije uspjelo. Molim izaberite odgovarajući monitor

en: Services and deamons
bs: Servisi i demoni

en: Remote host name missing!
bs: Ime udaljenog računara nedostaje!

en: with /usr
bs: sa /usr

en: Network
bs: Mreža

en: Auto-detect printers connected to machines running Microsoft Windows
bs: Automatski prepoznaj štampače spojene na Microsoft Windows računare

en: This password is too simple
bs: Ova šifra je previše jednostavna

en: Chkconfig obey msec rules
bs: Chkconfig poštuje msec pravila

en: Slovakian (QWERTZ)
bs: Slovačka (QWERTZ)

en: To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments.
bs: Pisanje i izmjena programa u raznim jezicima kao što su Perl, Python, C i C++ nikad nije bilo lakše, zahvaljujući GNU gcc 3 i najboljim Open Source razvojnim okolinama.

en: No devices found
bs: Nije pronađen nijedan uređaj

en: Truly minimal install (especially no urpmi)
bs: Stvarno minimalna instalacija (posebno bez urpmi)

en: Use daemon
bs: Koristi demon

en: Authentication
bs: Baza korisnika

en: Add this printer to Star Office/OpenOffice.org/GIMP
bs: Dodaj ovaj štampač u Star Office/OpenOffice.org/GIMP

en: Additional CUPS servers:
bs: Dodatni CUP serveri:

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
bs: Izaberite jedan od automatski prepoznatih štampača sa liste ili unesite ime računara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za unos.

en: Where do you want to mount %s?
bs: Gdje želite montirati uređaj %s?

en: Algeria
bs: Alžir

en: Restore Via Network
bs: Vrati putem mreže

en: Initrd-size
bs: Initrd-veličina

en: In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
bs: U slučaju da postoji više raznih servera za vašu karticu, sa ili bez 3D
    ubrzanja, traži se da izaberete server koji najbolje odgovara vašim
    potrebama.

en: 	Backups use tar and gzip
bs: 	Backupi koriste tar i gzip

en: Set as default
bs: Postavi kao podrazumijevano

en: Configured on this machine
bs: Podešeno na ovom računaru

en: Both Control keys simultaneously
bs: Obje Control tipke istovremeno

en:  --help                - display this help
bs:  --help                - prikazuje ovu pomoć

en: [OPTION]...
      --no-confirmation      don't ask first confirmation question in MandrakeUpdate mode
      --no-verify-rpm        don't verify packages signatures
      --changelog-first      display changelog before filelist in the description window
      --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found
bs: [OPTION]...
      --no-confirmation      ne postavljaj prvo pitanje u MandrakeUpdate modu
      --no-verify-rpm        ne provjeravaj potpise paketa
      --changelog-first      prikaži changelog prije filelist u opisnom prozoru
      --merge-all-rpmnew     predloži merge svih pronađenih .rpmnew/.rpmsave datoteka

en: Setting Default Printer...
bs: Postavljam podrazumjevani štampač...

en: Interface %s (using module %s)
bs: Interfejs %s (koristeći modul %s)

en: Generating preview ...
bs: Generišem pregled...

en: Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough '0' (zeroes).
bs: Frekvencija bi trebala imati završetak k, M ili G (na primjer, "2.46G" za frekvenciju 2.46 GHz) ili dodajte odgovarajući broj nula (0).

en: ignore
bs: ignoriši

en: Allow/Forbid X connections:
    
    - ALL (all connections are allowed),
    
    - LOCAL (only connection from local machine),
    
    - NONE (no connection).
bs: Dozvoli/zabrani X konekcije:
    
    - SVE (sve konekcije su dozvoljene),
    
    - LOKAL (samo konekcije sa lokalne mašine),
    
    - NIŠTA (nisu dozvoljene konekcije).

en: , multi-function device on parallel port #%s
bs: , višenamjenski uređaj na paralelnom portu #%s

en: serial
bs: serijski

en: Georgian ("Latin" layout)
bs: Gruzijska ("latinični" izgled)

en: Get the best items with Mandrake Linux Strategic partners
bs: Nabavite najbolje proizvode kod strateških partnera Mandrake Linuxa

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
bs: Sada možete navesti opcije za modul %s.
    Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'

en: Kenya
bs: Kenija

en: Use ``Unmount'' first
bs: Najprije koristite ``Demontiraj''

en: Installing mtools packages...
bs: Instaliram mtools pakete...

en: You must specify a root partition
bs: Morate navesti root particiju

en: first step creation
bs: kreiranje prvog koraka

en: Both Shift keys simultaneously
bs: Obje Shift tipke istovremeno

en:  --id <id_label>       - load the html help page which refers to id_label
bs:  --id <id_label>       - učitaj HTML help stranicu koja se odnosi na id_label

en: Select a scanner model
bs: Izaberite model skenera

en: Accept/Refuse bogus IPv4 error messages.
bs: Prihvati/odbij neispravne IPv4 poruke o grešci.

en: Drakbackup Configuration
bs: Podešavanje Drakbackup-a

en: Save as..
bs: Sačuvaj kao...

en: Korea (North)
bs: Koreja (Sjeverna)

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
bs: Interfejs još nije podešen.
    Pokrenite čarobnjak za podešavanje u glavnom prozoru

en: System configuration
bs: Podešavanje sistema

en: Domain Admin Password
bs: Administratorska šifra domena

en: Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ...
bs: Prilagodite savršeno svoj računar vašim potrebama pomoću 11 dosupnih Mandrake Linux korisničkih okolina koje se mogu potpuno prilagoditi: KDE 3.1, GNOME 2.2, Window Maker, ...

en: Configuring printer ...
bs: Podešavam štampač ...

en: To ensure data integrity after resizing the partition(s), 
    filesystem checks will be run on your next boot into Windows(TM)
bs: Da bi se osigurao integritet podataka nakon promjene veličine, 
    prilikom idućeg pokretanja Windows(TM) biće izvršena provjera datotečnog sistema

en: if set to yes, run some checks against the rpm database.
bs: ako je postavljeno na da, izvršava neke provjere rpm baze podataka.

en: Virgin Islands (British)
bs: Djevičanska ostrva (Britanska)

en: click here if you are sure.
bs: kliknite ovdje ako ste sigurni.

en: No configuration file found 
    please click Wizard or Advanced.
bs: Nije pronađena konfiguraciona datoteka 
    molim kliknite na Čarobnjak ili Više opcija.

en: Listed here are the existing Linux partitions detected on your hard drive.
    You can keep the choices made by the wizard, since they are good for most
    common installations. If you make any changes, you must at least define a
    root partition ("/"). Do not choose too small a partition or you will not
    be able to install enough software. If you want to store your data on a
    separate partition, you will also need to create a "/home" partition
    (only possible if you have more than one Linux partition available).
    
    Each partition is listed as follows: "Name", "Capacity".
    
    "Name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard drive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". For IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
bs: Ovdje su navedene Linux particije koje već postoje na vašem hard disku.
    Možete zadržati izbore koje je napravio čarobnjak, pošto su oni dobri za
    uobičajene instalacije. Ako napravite neke izmjene, morate, ako ništa
    drugo, definisati root particiju ("/"). Nemojte izabrati premalu particiju
    ili nećete moći instalirati dovoljno softvera. Ako želite držati vaše podatke
    na zasebnoj particiji, trebate takođe napraviti "/home" particiju (što je
    moguće samo ako imate više od jedne Linux particije na raspolaganju).
    
    Svaka particija je navedena ovako: "Ime", "Kapacitet".
    
    "Ime" se sastoji od: "vrsta hard diska", "broj hard diska", "broj
    particije" (na primjer, "hda1").
    
    
    "Vrsta hard diska" je "hd" ako je vaš hard disk IDE, a "sd" ako je
    u pitanju SCSI hard disk.
    
    "Broj hard diska" je uvijek slovo nakon "hd" ili "sd". Kod IDE hard
    diskova:
    
     * "a" znači "master hard disk na primarnom IDE kontroleru";
    
     * "b" znači "slave hard disk na primarnom IDE kontroleru";
    
     * "c" znači "master hard disk na sekundarnom IDE kontroleru";
    
     * "d" znači "slave hard disk na sekundarnom IDE kontroleru";
    
    Kod SCSI hard diskova, "a" je "disk sa najnižim SCSI IDom", "b"
    je "drugi najniži SCSI ID", itd.

en: Remove
bs: Pobriši

en: Lesotho
bs: Lesoto

en: Pipe job into a command
bs: Spoji zadatak na komandu

en: Cote d'Ivoire
bs: Obala Slonovače

en: new dynamic device name generated by core kernel devfs
bs: novo dinamičko ime uređaja koje generiše kernelov devfs

en: Yes
bs: Da

en: Which protocol do you want to use?
bs: Koji protokol želite koristiti?

en: Restore Progress
bs: Napredak vraćanja

en: Estonia
bs: Estonija

en: Choose the host on which the local scanners should be made available:
bs: Izaberite računar kojem treba omogućiti pristup lokalnim skenerima:

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
bs: Imate rupu u vašoj tabeli particija, ali je ja ne mogu upotrijebiti.
    Jedino rješenje je da pomjerite vaše primarne particije, kako bi se rupa našla pored extended particija

en: Channel
bs: Kanal

en: Add
bs: Dodaj

en: No Internet Connection Sharing has ever been configured.
bs: Dijeljenje Internet konekcije do sada nije podešeno.

en:  Error while sending mail.
bs:  Greška tokom slanja pošte.

en: Keyboard
bs: Tastatura

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
bs: Ubacite CD sa oznakom %s u CD
    jedinicu pod tačkom montiranja /mnt/cdrom

en: Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough '0' (zeroes).
bs: Brzina bi trebala imati završetak k, M ili G (na primjer, "11M" za 11M) ili dodajte odgovarajući broj nula (0).

en: Choose the connection you want to configure
bs: Izaberite konekciju koju želite podesiti

en: Please wait, setting security level...
bs: Molim sačekajre, podešavam nivo sigurnosti...

en: Configuring network device %s
bs: Podešavam mrežni uređaj %s

en: activated
bs: aktiviran

en: Please choose which network interface will be used for the dhcp server.
bs: Molim izaberite koji mrežni interfejs želite koristiti za spajanje na DHCP server.

en: Finding packages to upgrade...
bs: Pronalazim pakete za unaprjeđenje...

en: Mount point:
bs: Tačka montiranja:

en: parse all fonts
bs: obradi sve fontove

en: Allow/Forbid direct root login.
bs: Dozvoli/zabrani direktan root login.

en:  Accept/Refuse broadcasted icmp echo.
bs:  Dozvoli/zabrani broadcast-ovani ICMP eho.

en: With X
bs: Sa X-om

en: Multi-head configuration
bs: Multi-head konfiguracija

en: No browser available! Please install one
bs: Nemate nijedan browser! Molim instalirajte neki browser

en: Keep the changes?
    The current configuration is:
    
    %s
bs: Zadržati izmjene?
    Trenutna konfiguracija je:
    
    %s

en: You can't use ReiserFS for partitions smaller than 32MB
bs: Ne možete koristiti ReiserFS za particije manje od 32MB

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
bs: Rwho protokol omogućava udaljenim korisnicima da dobiju listu svih
    korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru).

en: Domain name
bs: Ime domena

en: Sharing of local printers
bs: Dijeljenje lokalnih štampača

en: Enable/Disable libsafe if libsafe is found on the system.
bs: Uključi/isključi libsafe ako je libsafe pronađen na sistemu.

en: Available printers
bs: Dostupni štampači

en: NO
bs: NE

en: Empty
bs: Prazno

en: text width
bs: širina teksta

en: Where do you want to mount device %s?
bs: Gdje želite montirati uređaj %s?

en: The default lease (in seconds)
bs: Podrazumjevani lease (u sekundama)

en: We are now going to configure the %s connection.
    
    
    Press "%s" to continue.
bs: Sada ćemo podesiti konekciju %s.
    
    
    Pritisnite "%s" za nastavak.

en: Interface "%s"
bs: Interfejs "%s"

en: With basic documentation (recommended!)
bs: Sa osnovnom dokumentacijom (preporučeno)

en: 1 button
bs: 1 dugme

en: 
    There are %d unknown printers directly connected to your system
bs: 
    Na vaš sistem je spojeno %d nepoznatih štampača

en: Korea
bs: Koreja

en: Your choice? (default `%s'%s)
bs: Vaš izbor? (podrazumjevano '%s' %s)

en: Raw printer
bs: Sirovi štampač

en: official vendor name of the cpu
bs: zvanično ime proizvođača procesora

en: Useless without Terminal Server
bs: Beskorisno bez Terminal servera

en: Vendor
bs: Proizvođač

en: Interface %s
bs: Interfejs %s

en: Configure mouse
bs: Podešavanje miša

en: Choose the mount points
bs: Izaberite tačke montiranja

en: OK
bs: U redu

en: Yugoslavian (latin)
bs: Jugoslavenska (latinično)

en: Installing
bs: Instaliram

en: Logitech MouseMan with Wheel emulation
bs: Logitech MouseMan sa simulacijom točkića

en: Launch userdrake
bs: Pokreni userdrake

en: Is this an install or an upgrade?
bs: Da li je ovo instalacija ili unaprjeđenje?

en: ISDN card
bs: ISDN kartica

en: To share your own knowledge and help build Linux software, join our discussion forums on our "Community" webpages.
bs: Podijelite vaše znanje i pomozite izgradnju Linux softvera, pridružite se diskusijskim grupama na našim "Community" stranicama.

en: 	-Hard drive.
bs: 	-Hard disk.

en: This step is activated only if an old GNU/Linux partition has been found on
    your machine.
    
    DrakX now needs to know if you want to perform a new install or an upgrade
    of an existing Mandrake Linux system:
    
     * "%s": For the most part, this completely wipes out the old system. If
    you wish to change how your hard drives are partitioned, or change the file
    system, you should use this option. However, depending on your partitioning
    scheme, you can prevent some of your existing data from being over-written.
    
     * "%s": this installation class allows you to update the packages
    currently installed on your Mandrake Linux system. Your current
    partitioning scheme and user data is not altered. Most of other
    configuration steps remain available, similar to a standard installation.
    
    Using the ``Upgrade'' option should work fine on Mandrake Linux systems
    running version "8.1" or later. Performing an Upgrade on versions prior
    to Mandrake Linux version "8.1" is not recommended.
bs: Ovaj korak se aktivira samo ako je na vašem računaru pronađena postojeća
    GNU/Linux particija.
    
    DrakX sada treba znati da li želite izvršiti novu instalaciju ili
    nadogradnju postojećeg Mandrake Linux sistema:
    
     * "%s": Najčešće ovo će u potpunosti obrisati stari sistem. Ako želite
    promijeniti particioniranje starog hard diska ili promijeniti datotečni
    sistem, trebate koristiti ovu opciju. Ali, ovisno o vašoj šemi particioniranja,
    možete spriječiti da neki od vaših postojećih podataka budu prepisani.
    
     * "%s": Ova vrsta instalacije vam omogućuje da updatujete pakete
    koji su trenutno instalirani na vašem Mandrake Linux sistemu. Vaša trenutna
    šema particioniranja i korisnički podaci neće biti izmijenjeni. Većina
    ostalih koraka konfiguracije ostaju kao što jesu, slično običnoj instalaciji.
    
    Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandrake Linux sistemima
    koji koriste verziju "8.1" ili kasniju. Obavljanje nadogradnje na ranijim
    verzijama Mandrake Linuxa, prije verzije "8.1", nije preporučeno.

en: Printer on remote CUPS server
bs: Štampač na udaljenom CUPS serveru

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
bs: Nisam uspio ukloniti štampač "%s" iz Star/Open Offica.

en: here if no.
bs: ovdje ako ne.

en: DHCP host name
bs: DHCP ime računara

en: The maximum lease (in seconds)
bs: Maksimalni lease (u sekundama)

en: Please choose which serial port your mouse is connected to.
bs: Molim izaberite na kojem serijskom portu je spojen vaš miš.

en: Did it work properly?
bs: Da li je radilo ispravno?

en: Mount the file system read-only.
bs: Montiraj datotečni sistem samo za čitanje.

en: Poor
bs: Loš

en: Report check result by mail
bs: Prijavi rezultate provjere mailom

en: The DHCP start range
bs: Početak DHCP raspona

en: Unsafe
bs: Nesigurno

en: , %s sectors
bs: , %s sektora

en: No
bs: Ne

en: Guadeloupe
bs: Gvadalupe

en: could not find any font.
bs: ne mogu naći nijedan font.

en: Do you want the BackSpace to return Delete in console?
bs: Želite li da BackSpace vrati Delete u konzoli?

en: Vertical refresh rate
bs: Brzina vertikalnog osvježavanja

en: Entering step `%s'
bs: Prelazim na korak `%s'

en: Removing %s ...
bs: Uklanjam %s...

en: No printer
bs: Nema štampača

en: alert configuration
bs: postavka upozorenja

en: NetWare Printer Options
bs: Opcije NetWare štampača

en: %s BootSplash (%s) preview
bs: %s BootSplash (%s) pregled

en: February
bs: Februar

en: General
bs: Općenito

en: /etc/issue* exist
bs: /etc/issue* postoji

en: Add a user
bs: Dodavanje korisnika

en: Network configuration (%d adapters)
bs: Podešavanje mreže (%d adaptera)

en: Deactivate now
bs: Zaustavi sada

en: Mandatory package %s is missing
bs: Nedostaje obavezan paket %s

en: Philippines
bs: Filipini

en: Ok
bs: U redu

en: drakTermServ Overview
bs: drakTermServ pregled

en: Print Queue Name
bs: Naziv reda za štampu

en: Do you want to use aboot?
bs: Da li želite koristiti aboot?

en: Belarusian
bs: Bjeloruska

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
bs: PDQ podržava samo lokalne štampače, udaljene LPD štampačei Socket/TCP štampače.

en: Move files to the new partition
bs: Prebaci datoteke na novu particiju

en: Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network.
bs: Ovdje dodajte CUPS servere čije štampače želite koristiti. Ovo trebate raditi samo ako serveri ne broadcast-uju informacije o njihovim štampačima cijeloj lokalnoj mreži.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
bs: 
    Dobro došli u Čarobnjak za podešavanje štampača
    
    Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj računar.
    
    Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i upalite ga kako bi bio automatski prepoznat.
    
     Kliknite na "Dalje" kada budete spremni, ili na "Odustani" ako ne želite podesiti štampač sada.

en: Restore From Catalog
bs: Vrati iz kataloga

en: mounting partition %s in directory %s failed
bs: montiranje particije %s u direktoriju %s nije uspjelo

en: Lilo screen
bs: Lilo ekran

en: LILO with graphical menu
bs: LILO sa grafičkim menijem

en: Estimating
bs: Procjenjujem

en: You can't unselect this package. It is already installed
bs: Ne možete isključiti ovaj paket. On je već instaliran

en: , printer "%s" on SMB/Windows server "%s"
bs: , štampač "%s" na SMB/Windows serveru "%s"

en: Go on anyway?
bs: Svejedno nastavi?

en: Looking for available packages and rebuilding rpm database...
bs: Tražim dostupne pakete i izgrađujem rpm bazu podataka...

en: 
                          DrakBackup Report
bs: 
                          DrakBackup Izvještaj

en: Does not appear to be recordable media!
bs: Izgleda da na ovaj medij nije moguće snimati!

en: Specify options
bs: Navedi opcije

en: New user list:
bs: Nova lista korisnika:

en: Either the server name or the server's IP must be given!
bs: Treba biti dato ili ime servera ili IP adresa servera!

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
bs: Vlastita boot disketa vam omogućuje da pokrenete Linux pri čemu ne ovisite
    od bootloader programa. Ovo je korisno ako ne želite instalirati SILO na
    vaš sistem, ako neki drugi operativni sistem uklanja SILO ili ako SILO ne radi
    na vašoj trenutnoj konfiguraciji. Vlastiti bootdisk se može takođe koristiti sa
    Mandrake rescue image, pri čemu je mnogo lakše ispraviti neke ozbiljne
    sistemske kvarove.
    
    Ako želite napraviti boot disketu za vaš sistem, stavite neku disketu u vašu
    prvu jedinicu i pritisnite "U redu".

en: You can't use an encrypted file system for mount point %s
bs: Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s

en: Set the password history length to prevent password reuse.
bs: Podesi dužinu historije šifara kojom se sprječava ponovno korištenje šifara.

en: Norfolk Island
bs: Norfolk ostrvo

en: Theme installation failed!
bs: Instalacija teme nije uspjela!

en: Nothing to do
bs: Nemam šta da radim

en: Use for loopback
bs: Koristi za loopback

en: Mandrake Bug Report Tool
bs: Mandrake alat za prijavu bugova

en: Apply filter
bs: Primijeni filter

en: use pppoe
bs: koristi pppoe

en: Moving files to the new partition
bs: Premještam datoteke na novu particiju

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
bs: XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem

en: Advanced
bs: Više opcija

en: Transfer
bs: Prebaci

en: Dvorak (Swedish)
bs: Dvorak (Švedska)

en: Afghanistan
bs: Afganistan

en: More Options
bs: Više opcija

en: Delete Hard Drive tar files after backup to other media.
bs: Obriši tar datoteke sa diska nakon backupa na drugi medij.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
bs: Cron je standardan UNIX program koji periodično pokreće programe koje
    zada korisnik. Vixie cron dodaje veći broj mogućnosti osnovnom
    UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje.

en: Add Client -->
bs: Dodaj klijenta -->

en: Read carefully!
bs: Pročitajte pažljivo!

en: Please,
    type in your tv norm and country
bs: Molim,
    unesite vaš tv standard i državu

en: No (experts only)
bs: Ne (samo eksperti)

en: No kernel selected!
bs: Nije izabran kernel!

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Press enter to boot the selected OS, 'e' to edit the
bs: Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje

en: The encryption keys do not match
bs: Ključevi enkripcije se ne poklapaju

en: For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup.
bs: Za višesesijski CD, samo će prva sesija obrisati CDRW. U suprotnom, CDRW se briše prije svakog backupa.

en: USB printer
bs: USB štampač

en: Right "Windows" key
bs: Desna "Windows" tipka

en: if set to yes, check empty password in /etc/shadow.
bs: ako je postavljeno na da, provjerava prazne šifre u /etc/shadow.

en: Before continuing, you should carefully read the terms of the license. It
    covers the entire Mandrake Linux distribution. If you do agree with all the
    terms in it, check the "%s" box. If not, simply turn off your computer.
bs: Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona
    pokriva cijelu Mandrake Linux distribuciju. Ako se slažete sa svim
    uvjetima u njoj, izaberite opciju "%s". Ako ne, samo ugasite
    vaš računar.

en: Here is a list of the available printing options for the current printer:
bs: Ovo je lista mogućih opcija za štampu za trenutni štampač:

en: Resolutions
bs: Rezolucije

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
bs: drakfirewall podešavanje
    
    Podesite lični firewall na ovom Mandrake Linux računaru.
    Ako želite moćnu soluciju posebnog firewalla, molim pogledajte
    specijaliziranu MandrakeSecurity Firewall distribuciju.

en: Please enter your username, password and domain name to access this host.
bs: Molim unesite vaše korisničko ime, šifru i domen da biste pristupili ovom računaru.

en: Remove selected host
bs: Ukloni izabrani računar

en: Network configuration
bs: Podešavanje mreže

en: No sharing
bs: Bez dijeljenja

en: Move selected rule down one level
bs: Pomjeri izabrano pravilo dole za jedan nivo

en: FATAL
bs: FATALNO

en: Refresh the list
bs: Osvježi listu

en: The DHCP server will allow other computer to boot using PXE in the given range of address.
    
    The network address is %s using a netmask of %s.
bs: DHCP server omogućuje pokretanje drugih računara koristeći PXE u zadatom rasponu adresa.
    
    Mrežna adresa je %s koristeći netmasku %s.

en: Delete
bs: Obriši

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
bs: Mogu podesiti vaš računar da automatski pokrene grafički interfejs (XFree) pri pokretanju računara.
    Želite li da se XFree automatski pokreće?

en: Build the disk
bs: Napravi disk

en: Disconnect %s
bs: Prekini konekciju na %s

en: SSH Server
bs: SSH server

en: 	-Network by rsync.
bs: 	-Mrežu preko rsync-a.

en: European protocol
bs: Evropski protokol

en: , printer "%s" on server "%s"
bs: , štampač "%s" na serveru "%s"

en: Note that currently all 'net' media also use the hard drive.
bs: Obratite pažnju da trenutno svi 'net' mediji takođe koriste hard disk.

en: Error
bs: Greška

en: allow "su"
bs: dozvoli "su"

en: Australia
bs: Australija

en: please wait during ttmkfdir...
bs: molim sačekajte tokom ttmkfdir...

en: Configure only card "%s"%s
bs: Podesi samo karticu "%s"%s

en: Level
bs: Nivo

en: Change the printing system
bs: Promijenite sistem štampe

en: Your system supports multiple head configuration.
    What do you want to do?
bs: Vaš sistem podržava konfiguraciju više glava.
    Šta želite učiniti?

en: Configure services
bs: Podešavanje servisa

en: Broadcast Address:
bs: Broadcast adresa:

en: mount failed:
bs: montiranje nije uspjelo:

en: the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to "benchmark" the cpu.
bs: GNU/Linux kernel mora izvršiti proračunsku petlju prilikom boot-a kako bi inicijalizirao tajmer.  Rezultat rada te petlje se prikazuje u vidu bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa.

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
bs: Nisam uspio dodati štampač "%s" u Star Office/OpenOffice.org/GIMP.

en: Remote Administration
bs: Udaljena administracija

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
bs: PCMCIA podrška za 2.2 kernele više ne postoji. Molim koristite 2.4 kernel.

en: Selected All
bs: Sve izabrano

en: Webmin Service
bs: Webmin servis

en: device
bs: uređaj

en: Enter the directory to save to:
bs: Unesite direktorij u koji želite spasiti:

en: Greece
bs: Grčka

en: All
bs: Svi

en: Which printing system (spooler) do you want to use?
bs: Koji sistem štampanja (spooler) želite koristiti?

en: July
bs: Juli

en: Prints into %s
bs: Štampa u %s

en: An error occurred
bs: Došlo je do greške

en: This package must be upgraded.
    Are you sure you want to deselect it?
bs: Ovaj paket mora biti unaprijeđen
    Jeste li sigurni da ga želite isključiti?

en: Tamil (Typewriter-layout)
bs: Tamilska (pisaća mašina)

en: Use password to authenticate users.
bs: Koristi šifru za provjeru autentičnosti korisnika.

en: Allow/Forbid the list of users on the system on display managers (kdm and gdm).
bs: Dozvoli/zabrani listu korisnika sistema na display manager-ima (kdm i gdm).

en: manual
bs: ručno

en: Filename text to search for:
bs: Tekst u imenu datoteke koji se traži:

en: Printer manufacturer, model, driver
bs: Proizvođač štampača, model, drajver

en: There is no medium or it is write-protected for device %s.
    Please insert one.
bs: Nema medija ili je zabranjeno pisanje na medij za uređaj %s.
    Molim ubacite neki medij.

en: Directory %s already contains data
    (%s)
bs: Direktorij %s već sadrži neke podatke
    (%s)

en: Printer on NetWare server
bs: Štampač na NetWare serveru

en: Give the ram size in MB
bs: Navedite veličinu rama u MB

en: Friday
bs: Petak

en: Disconnection from Internet complete.
bs: Prekid veze sa Internetom završen.

en: Real name
bs: Pravo ime

en: done
bs: gotovo

en: Please uncheck or remove it on next time.
bs: Molim isključite ili pobrišite ga idući put.

en: Higher
bs: Viši

en: Choose the partitions you want to format
bs: Izaberite particije koje želite formatirati

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
bs: Na vašem računaru nije detektovana TV kartica. Molim provjerite da li je ispravno priključena Video/TV kartica koja je podržana pod Linuxom.
    
    
    Možete posjetiti našu bazu hardvera na:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: Can't find %s on %s
bs: Ne mogu pronaći %s na %s

en: Japanese 106 keys
bs: Japanska 106 tipki

en: Could not install the packages needed to share your scanner(s).
bs: Ne mogu instalirati pakete koji su potrebni za dijeljenje skenera.

en: This will take a few minutes.
bs: Ovo će potrajati par minuta.

en: June
bs: Juni

en: Use scanners on remote computers
bs: Koristi skenere na udaljenim računarima

en: Delete selected rule
bs: Obriši izabrano pravilo

en: Accessing printers on remote CUPS servers
bs: Pristupam štampačima na udaljenim CUPS serverima

en: Insert a floppy in %s
bs: Ubacite disketu u %s

en: Maldives
bs: Maldivi

en: compact
bs: kompaktno

en: 1 minute
bs: 1 minuta

en: type: fat
bs: tip: fat

en: on channel %d id %d
bs: na kanalu %d id %d

en: , multi-function device
bs: , višenamjenski uređaj

en: Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!
bs: Mandrake Linux 9.2 vam pruža Mandrake Kontrolni centar, moćan alata koji potpuno prilagođuje vaš računar namjeni koju ste odredili za njega. Podesite i prilagodite elemente kao što je nivo sigurnosti,periferni uređaji (ekran, miš, tastatura...), Internet konekciju i mnoge druge stvari!

en: Activate/Disable ethernet cards promiscuity check.
bs: Aktiviraj/isključi provjeru promiskuitetnog moda Ethernet kartica.

en: There is no FAT partition to resize (or not enough space left)
bs: Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo dovoljno prostora)

en: Up
bs: Gore

en: Area:
bs: Oblast :

en: (E)IDE/ATA controllers
bs: (E)IDE/ATA kontroleri

en: All I/O to the file system should be done synchronously.
bs: Sav U/I na datotečni sistem se treba izvršavati sinhrono.

en: Custom configuration
bs: Vlastita konfiguracija

en: Please indicate where the installation image will be available.
    
    If you do not have an existing directory, please copy the CD or DVD contents.
bs: Molim navedite gdje se nalazi instalaciona slika.
    
    Ako nemate postojeći direktorij, molim kopirajte sadržaj CDa ili DVDa.

en: September
bs: Septembar

en: saving Bootsplash theme...
bs: snimam Bootsplash temu...

en: Do you have another one?
bs: Imate li neki drugi?

en: , printing to %s
bs: , štampa u %s

en: Assign host name from DHCP address
bs: Odredi ime računara iz DHCP adrese

en: Toggle to normal mode
bs: Prebaci u normalni mod

en: Generic
bs: Opšti

en: Cylinder %d to %d
bs: Cilindar %d do %d

en: YOUR TEXT HERE
bs: VAŠ TEKST OVDJE

en: New profile...
bs: Novi profil...

en: NONE
bs: NIŠTA

en: Which disk do you want to move it to?
bs: Na koji disk je želite premjestiti?

en: Display logo on Console
bs: Prikaži logo na konzoli

en: Windows Domain
bs: Windows domena

en: Saami (norwegian)
bs: Saami (norveška)

en: Interface %s (on network %s)
bs: Interfejs %s (na mreži %s)

en: Wallis and Futuna
bs: Wallis i Futuna

en: Need to create /etc/dhcpd.conf first!
bs: Najprije treba napraviti /etc/dhcpd.conf !

en: Is FPU present
bs: Da li postoji FPU

en: There are no scanners found which are available on your system.
bs: Nisam pronašao nijedan skener na vašem sistemu.

en: No additional information
    about this service, sorry.
bs: Nema dodatnih informacija
    o ovom servisu, žalim.

en: Build Single NIC -->
bs: Izgradi jedan NIC -->

en: Marshall Islands
bs: Maršalova ostrva

en: Is this correct?
bs: Da li je ovo ispravno?

en: Root password
bs: Root šifra

en: Build All Kernels -->
bs: Izgradi sve kernele -->

en: DVDRAM device
bs: DVDRAM uređaj

en: if set to yes, report unowned files.
bs: ako je postavljeno na da, prijavljuje datoteke bez vlasnika.

en: This is HardDrake, a Mandrake hardware configuration tool.
    <span foreground="royalblue3">Version:</span> %s
    <span foreground="royalblue3">Author:</span> Thierry Vignaud &lt;tvignaud\@mandrakesoft.com&gt;
bs: Ovo je HardDrake, Mandrake-ov alat za podešavanje hardvera.
    <span foreground="royalblue3">Verzija:</span> %s
    <span foreground="royalblue3">Autor:</span> Thierry Vignaud &lt;tvignaud\@mandrakesoft.com&gt;

en: You don't have a swap partition.
    
    Continue anyway?
bs: Nemate nijednu swap particiju
    
    Svejedno nastavi?

en: Version:
bs: Verzija:

en: Server IP missing!
bs: Nedostaje IP adresa servera!

en: Suriname
bs: Surinam

en: Use a floppy
bs: Koristi disketu

en: Enable ACPI
bs: Uključi ACPI

en: Give write access to ordinary users
bs: Daj dozvolu za pisanje običnim korisnicima

en: Graphical Environment
bs: Grafičko okruženje

en: Do nothing
bs: Nemoj raditi ništa

en: Delete Client
bs: Obriši klijent

en: Filesystem type:
bs: Tip datotečnog sistema:

en: Starting network...
bs: Pokrećem mrežu...

en: Vietnam
bs: Vijetnam

en: /_Fields description
bs: /_Opis polja

en: Optimize your security by using Mandrake Linux
bs: Optimizirajte vašu sigurnost koristeći Mandrake Linux

en: Help
bs: Pomoć

en: Check if the network devices are in promiscuous mode
bs: Provjeri da li su mrežni uređaji u promiskuitetnom modu

en: Your personal phone number
bs: Vaš lični broj telefona

en: Which size do you want to keep for Windows on
bs: Koju veličinu želite da sačuvate za Windows na

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
bs: Testna stranica je poslana štampaču.
    Može potrajati određeno vrijeme dok štampač krene.

en: Username required
bs: Potrebno korisničko ime

en: Device
bs: Uređaj

en: Depending on the default language you chose in Section , DrakX will
    automatically select a particular type of keyboard configuration. However,
    you may not have a keyboard that corresponds exactly to your language: for
    example, if you are an English speaking Swiss person, you may have a Swiss
    keyboard. Or if you speak English but are located in Quebec, you may find
    yourself in the same situation where your native language and keyboard do
    not match. In either case, this installation step will allow you to select
    an appropriate keyboard from a list.
    
    Click on the "%s" button to be presented with the complete list of
    supported keyboards.
    
    If you choose a keyboard layout based on a non-Latin alphabet, the next
    dialog will allow you to choose the key binding that will switch the
    keyboard between the Latin and non-Latin layouts.
bs: Ovisno o osnovnom jeziku koji izaberete u Sekciji "Jezik", DrakX će
    automatski izabrati određeni tip tastature. Ipak, možda nemate tastaturu
    koja tačno odgovara vašem jeziku: npr. ako ste Švajcarac koji govori
    engleski, možda imate švajcarsku tastaturu. Ili ako govorite engleski ali
    se nalazite u Kvibeku, možda ćete se naći u situaciji gdje se vaš jezik i
    tastatura ne poklapaju. U svakom slučaju, ovaj korak instalacije vam
    omogućava da izaberete odgovarajuću tastaturu sa liste.
    
    Kliknite na dugme "%s" kako bi vam bila predstavljena potpuna lista
    podržanih tastatura.
    
    Ako izaberete raspored tipaka koji je baziran na ne-latiničnoj abecedi,
    sljedeći dijalog će vam ponuditi da izaberete tipke pomoću kojih možete
    prebaciti tastaturu između latiničnog i ne-latiničnog rasporeda.

en: SMB (Windows 9x/NT) Printer Options
bs: Opcije SMB (Windows 9x/NT) štampača

en: Valid user list changed, rewriting config file.
bs: Lista ispravnih korisnika izmijenjena, prepisujem konfiguracionu datoteku.

en: mkinitrd optional arguments
bs: mkinitrd opcionalni argumenti

en: Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org.
bs: Surfajte koristeći Mozillu ili Konqueror, čitajte vašu poštu sa Evolution ili KMail, pravite vaše dokumente sa OpenOffice.org.

en: Protocol for the rest of the world
bs: Protokol za ostatak svijeta

en: Print test pages
bs: Štampaj testnu stranicu

en: Activate now
bs: Pokreni sada

en: 64 MB or more
bs: 64 MB ili više

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
bs: Molim izaberite testne stranice koje ćete štampati.
    Pažnja: foto testna stranica može tražiti dosta vremena za štampu a na laserskim štampačima sa malo memorije možda neće nikad ni izaći. U većini slučajeva dovoljno je odštampati standardnu testnu stranicu.

en: Please select the device where your %s is attached
bs: Molim izaberite uređaj gdje je priključen vaš %s

en: Not formatted
bs: Nije formatirana

en: Periodic Checks
bs: Periodične provjere

en: PXE Server Configuration
bs: Podešavanje PXE servera

en: Backup the system files before:
bs: Vrati sistemske datoteke prije:

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
bs: Ovo je standardna sigurnost koja je preporučena za računar koji će biti korišten za spajanje na Internet kao klijent.

en: First floppy drive
bs: Prva disketna jedinica

en: /File/_Quit
bs: /Datoteka/_Izlaz

en: Choose the new size
bs: Izaberite novu veličinu

en: Media class
bs: Klasa medija

en: You need to log out and back in again for changes to take effect
bs: Trebate se odjaviti i ponovo prijaviti na sistem kako bi izmjene stupile na snagu

en: The %s is not known by this version of Scannerdrake.
bs: Ova verzija Scannerdrake programa ne poznaje %s.

en: Faroe Islands
bs: Farska ostrva

en: Restart XFS
bs: Restartuj XFS

en: Add host/network
bs: Dodaj računar/mrežu

en: Scannerdrake will not be started now.
bs: Sada će biti pokrenut Scannerdrake.

en: Model name
bs: Naziv modela

en: Albania
bs: Albanija

en: British Indian Ocean Territory
bs: Britansko-Indijska morska teritorija

en: Normal Mode
bs: Normalni mod

en: No CD-R/DVD-R in drive!
bs: Nema CDR/DVDR u drajvu!

en: Printer connection type
bs: Tip konekcije štampača

en: No network adapter on your system!
bs: Nema mrežnog adaptera na vašem sistemu!

en: Network %s
bs: Mreža %s

en: Option %s out of range!
bs: Opcija %s izvan raspona!

en: Connect %s
bs: Konektuj se na %s

en: Restarting CUPS...
bs: Restartujem CUPS...

en: Printing/Scanning/Photo Cards on "%s"
bs: Štampam/skeniram/foto kartica na "%s"

en: Duplicate mount point %s
bs: Dvostruka tačka montiranja %s

en: if set to yes, run chkrootkit checks.
bs: ako je postavljeno na da, izvršava chkrootkit provjere.

en: Connection Configuration
bs: Podešavanje konekcije

en: Unknown|Generic
bs: Nepoznat|Opšti

en: At the time you are installing Mandrake Linux, it is likely that some
    packages have been updated since the initial release. Bugs may have been
    fixed, security issues resolved. To allow you to benefit from these
    updates, you are now able to download them from the Internet. Check "%s"
    if you have a working Internet connection, or "%s" if you prefer to
    install updated packages later.
    
    Choosing "%s" will display a list of places from which updates can be
    retrieved. You should choose one nearer to you. A package-selection tree
    will appear: review the selection, and press "%s" to retrieve and install
    the selected package(s), or "%s" to abort.
bs: Prilikom instalacije Mandrake Linuxa, moguće je da su neki paketi
    ažurirani od zadnjeg izdanja. Moguće je da su ispravljeni bugovi ili
    rješena neka sigurnosna pitanja. Ako želite iskoristiti ova unaprjeđenja,
    možete ih sada dobaviti sa Interneta. Izaberite "%s" ako imate ispravnu
    Internet vezu, ili "%s" ako ćete radije instalirati ažurirane pakete
    kasnije.
    
    Ako izaberete "%s" dobićete listu mjesta sa kojih se mogu skinuti
    novi paketi. Izaberite ono najbliže vama. Pojaviće se stablo za izbor
    paketa: pregledajte izabrano i pritisnite "%s" da dobavite i
    instalirate izabrane pakete, ili "%s" za prekid.

en: Quit
bs: Izlaz

en: Auto allocate
bs: Auto alokacija

en: Check bad blocks?
bs: Provjeri loše blokove?

en: Other MultiMedia devices
bs: Drugi multimedijalni uređaj

en: burner
bs: pržilica

en: Bug Description/System Information
bs: Opis buga/Sistemske informacije

en:  (Default is all users)
bs:  (Podrazumijevaju se svi korisnici)

en: No remote machines
bs: Nema udaljenih računara

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
bs: 
    Dobro došli u Čarobnjak za podešavanje štampača
    
    Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj računar.
    
    Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i upalite ga kako bi bio auto-prepoznat.
    
    Kliknite na "Dalje" kada budete spremni, ili na "Odustani" ako ne želite podesiti štampač sada.

en: Authentication NIS
bs: Autentifikacija NIS

en: Option ``Restrict command line options'' is of no use without a password
bs: Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre

en: Internet Connection Sharing currently enabled
bs: Dijeljenje Internet konekcije je trenutno aktivno

en: United Arab Emirates
bs: Ujedinjeni Arapski Emirati

en: Card IO_0
bs: IO_0 kartice

en: Disable Local Config
bs: Onemogući lokalnu konfiguraciju

en: Thailand
bs: Tajland

en: Card IO_1
bs: IO_1 kartice

en: Search:
bs: Pretraga:

en: Kazakhstan
bs: Kazahstan

en: Routers:
bs: Routeri:

en: Write
bs: Zapiši

en: Display all available remote CUPS printers
bs: Prikaži sve dostupne CUPS štampače

en: Mandrake Linux Installation %s
bs: Mandrake Linux instalacija %s

en: Unknown driver
bs: Nepoznat drajver

en: Thai keyboard
bs: Tajlandska tastatura

en: Bouvet Island
bs: Ostrvo Bouvet

en: Dialup options
bs: Opcije dialupa

en: If no port is given, 631 will be taken as default.
bs: Ako nije naveden port, podrazumijevaće se 631.

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
bs: Promijenite vaš CD-ROM!
    
    Molim ubacite CD označen sa "%s" u vaš CD-ROM uređaj i pritisnite "U redu" kad ste spremni.
    Ako ga nemate, pritisnite "Odustani" da preskočite instalaciju sa tog CD-ROMa.

en: Polish
bs: Poljska

en: 	-Network by webdav.
bs: 	-Mrežu preko webdav-a.

en: , multi-function device on a parallel port
bs: , višenamjenski uređaj na paralelnom portu

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
bs: Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molim pokrenite alat za podešavanje hardware-a.

en: No hard drives found
bs: Nije pronađen nijedan hard disk

en: 2 buttons
bs: 2 dugmeta

en: What kind is your ISDN connection?
bs: Koje je vrste vaša ISDN konekcija?

en: Label
bs: Oznaka

en: Save on floppy
bs: Spasi na disketu

en: Check open ports
bs: Provjeri otvorene portove

en: Edit selected printer
bs: Izmijeni izabrani štampač

en: Printer auto-detection
bs: Auto prepoznavanje štampača

en: Which of the following is your ISDN card?
bs: Koja od navedenih je vaša ISDN kartica?

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
bs: NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.
    Ovaj servis omogućuje funkcionalnost NFS servera, kojeg podešavate
    putem /etc/exports datoteke.

en: => Notice, a label changed:
    %s
bs: => Primjetite, label je promijenjena:
    %s

en: Number of capture buffers:
bs: Broj capture buffera:

en: Your choice? (0/1, default `%s')
bs: Vaš izbor? (0/1, podrazumjevano %s)

en: Any partitions that have been newly defined must be formatted for use
    (formatting means creating a file system).
    
    At this time, you may wish to reformat some already existing partitions to
    erase any data they contain. If you wish to do that, please select those
    partitions as well.
    
    Please note that it is not necessary to reformat all pre-existing
    partitions. You must reformat the partitions containing the operating
    system (such as "/", "/usr" or "/var") but you do not have to
    reformat partitions containing data that you wish to keep (typically
    "/home").
    
    Please be careful when selecting partitions. After formatting, all data on
    the selected partitions will be deleted and you will not be able to recover
    it.
    
    Click on "%s" when you are ready to format partitions.
    
    Click on "%s" if you want to choose another partition for your new
    Mandrake Linux operating system installation.
    
    Click on "%s" if you wish to select partitions that will be checked for
    bad blocks on the disk.
bs: Sve particije koje su upravo definisane moraju biti formatirane kako bi se
    mogle koristiti (formatiranje znači kreiranje datotečnog sistema). 
    
    U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće
    particije kako biste pobrisali podatke koje sadrže. Ako želite to učiniti,
    molim takođe izaberite i te particije.
    
    Molim obratite pažnju da nije neophodno formatirati sve postojeće
    particije. Morate reformatirati particije koje sadrže operativni sistem
    (kao što su "/", "/usr" ili "var") ali ne morate reformatirati particije
    koje sadrže podatke koje želite zadržati (tipično /home).
    
    Molim da pažljivo izaberete particije. Nakon formatiranja, svi podaci na
    odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih
    povratite.
    
    Kliknite na "%s" kada budete spremni za formatiranje particija.
    
    Kliknite na "%s" ako želite da izaberete druge particije za instalaciju
    vašeg novog Linux-Mandrake operativnog sistema.
    
    Kliknite na "%s" da izaberete particije koje želite provjeriti radi
    loših blokova.

en: French
bs: Francuska

en: Czech (QWERTY)
bs: Češka (QWERTY)

en: Allow X Window connections
bs: Dozvoli X Window konekcije

en: Hardware probing in progress
bs: Hardversko probanje u toku

en: Net Device
bs: Mrežni uređaj

en: Summary
bs: Ukratko

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
bs:  (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/lp1, ...).

en: Next
bs: Sljedeći

en: You can't install the bootloader on a %s partition
bs: Ne možete instalirati bootloader na %s particiju

en: Puerto Rico
bs: Portoriko

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
bs: 
    Dobro došli.
    
    Parametri automatske instalacije su dostupni u odjeljcima lijevo

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
bs: za dovršavanje podešavanja potreban je paket 'ImageMagick'.
    Kliknite na "U redu" da instalirate 'ImageMagick' ili "Odustani" za izlaz

en: Lithuanian "number row" QWERTY
bs: Litvanska "red brojeva" QWERTY

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
bs: Da bi se omogućilo unaprjeđenje vašeg sistema, biće uklonjeni sljedeći paketi: %s
    
    
    Želite li zaista deinstalirati ove pakete?

en: NIS Domain
bs: NIS domen

en: Antarctica
bs: Antarktik

en: 
    - User Files:
bs: 
    - korisničke datoteke:

en: Mount options
bs: Opcije montiranja

en: Jamaica
bs: Jamajka

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle or DVD players
bs: Dodjeljuje raw uređaje blokovskim uređajima (kao što su
    particije hard diska), za potrebu aplikacija kao što je Oracle ili DVD playeri

en: Please wait, preparing installation...
bs: Molim sačekajte, pripremam instalaciju...

en: Czech (QWERTZ)
bs: Češka (QWERTZ)

en: Track network card id (useful for laptops)
bs: Otkrij id mrežne karte (korisno za laptope)

en: The port number should be an integer!
bs: Broj porta treba biti cijeli broj!

en: You must choose an image file first!
bs: Morate izabrati image datoteku!

en: Restore from Hard Disk.
bs: Vrati sa hard diska

en: Add to LVM
bs: Dodaj na LVM

en: Trinidad and Tobago
bs: Trinidad i Tobago

en: LPD and LPRng do not support IPP printers.
bs: LPD i LPRng ne podržavaju IPP štampače.

en: Host name or IP.
bs: Ime računara ili IP.

en: /_Edit
bs: /_Edituj

en: simple
bs: jednostavno

en: Clear all
bs: Obriši sve

en: No test pages
bs: Nijedna testna strana

en: Falkland Islands (Malvinas)
bs: Falklandsko otočje

en: Boot disk creation
bs: Pravljenje boot diskete

en: Monday
bs: Ponedjeljak

en: Unknown model
bs: Nepoznat model

en: if set to yes, check files/directories writable by everybody.
bs: ako je postavljeno na da, provjerava datoteke/direktorije koje svako može pisati.

en: authentication
bs: provjera autentičnosti

en: Backup Now
bs: Backup-uj sada

en: /_File
bs: /_Datoteka

en: Removing printer from Star Office/OpenOffice.org/GIMP
bs: Uklanjam štampač iz Star/Open Offica

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
bs: Pokreće filtriranje paketa za Linux kernele serije 2.2 kako
    bi se aktivirao firewall i zaštitio vaš računar od mrežnih napada.

en: Editable
bs: Izmjenljivo

en: Which dhcp client do you want to use ? (default is dhcp-client)
bs: Koji DHCP klijent želite koristiti? (podrazumijeva se dhcp-client)

en: Tamil (ISCII-layout)
bs: Tamilska (ISCII)

en: Set shell commands history size. A value of -1 means unlimited.
bs: Podesi veličinu historije naredbi shella. Vrijednost -1 znači neograničeno.

en: Creating auto install floppy...
bs: Pravim auto instalacijsku disketu...

en: Searching for scanners ...
bs: Tražim skenere ...

en: Russia
bs: Rusija

en: Partitioning
bs: Particioniranje

en: ethernet card(s) detected
bs: prepoznata ethernet kartica(e)

en: Can't create catalog!
bs: Ne mogu napraviti katalog!

en: Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager.
bs: Zaokružite vaš sigurnosni sistem ovim vrlo jednostavnim softverom koji spaja komponente visokih performansi, kao što je firewall, VPN server i klijent, sistem za detekciju upada (intrusion detection system) inadzor saobraćaja.

en: Not enough free space for auto-allocating
bs: Nema dovoljno prostora za auto-alokaciju

en: Set root password
bs: Podesite administratorsku (root) šifru

en: Enable IP spoofing protection
bs: Uključi zaštitu od lažiranja IP adrese

en: There's no free driver for your sound card (%s), but there's a proprietary driver at "%s".
bs: Nema slobodnih drajvera za vašu zvučnu karticu (%s), ali postoji vlasnički drajver na "%s".

en: Group :
bs: Grupa :

en: After resizing partition %s, all data on this partition will be lost
bs: Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni

en: Internet connection configuration
bs: Podešavanje Internet konekcije

en: Add the name as an exception to the handling of password aging by msec.
bs: Dodaj ime kao izuzetak od upravljanja starenjem šifara putem msec-a.

en: Scanning for TV channels
bs: Tražim TV kanale

en: /_About...
bs: /_O programu...

en: Bengali
bs: Bengalska

en: Services: %d activated for %d registered
bs: Servisi: %d aktiviran za %d registrovan

en: Create a bootdisk
bs: Napravite boot disketu

en: Solomon Islands
bs: Solomonska ostrva

en: Please test your mouse:
bs: Molim testirajte miš:

en: (module %s)
bs: (modul %s)

en: Workgroup
bs: Radna grupa

en: Printer host name or IP
bs: Hostname štampača ili IP adresa

en: Host Path or Module
bs: Staza ili modul računara

en: Name of printer should contain only letters, numbers and the underscore
bs: Naziv štampača bi se trebao sastojati od slova, brojeva i donje linije

en: Show current interface configuration
bs: Prikaži postavke trenutnog interfejsa

en: Add Printer
bs: Dodaj štampač

en: The argument specifies if clients are authorized to connect
    to the X server from the network on the tcp port 6000 or not.
bs: Ovaj argument određuje da li su klijenti autorizovani za
    povezivanje na X server putem mreže na TCP portu 6000.

en: Development
bs: Programiranje

en: Done
bs: Gotovo

en: Web Server
bs: Web server

en: Chile
bs: Čile

en: 	Do not include System Files
bs: 	Ne uključuj sistemske datoteke

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
bs: Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju samo lokalne štampače, a ne i štampače na udaljenim računarima ili print serverima. Molim spojite vaš štampač na lokalni port ili ga podesite na računaru na koji je spojen.

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
bs: Vaš višenamjenski uređaj je automatski konfigurisan kako bi mogao skenirati. Sada možete skenirati sa komandne linije pomoću komande "scanimage" ("scanimage -d hp:%s" kako biste naveli scanner ako imate više od jednog) ili koristeći grafičke okoline "xscanimage" ili "xsane". Ako koristite GIMP, možete također skenirati koristeći odgovarajuću stavku u meniju "File"/"Acquire". Za više informacija, pogledajte još i "man scanimage" na komandnoj liniji ("#scanimage" u Konqueroru).
    
    Nemojte koristiti "scannerdrake" za ovaj uređaj!

en: (already added %s)
bs: (već dodan %s)

en: Bootloader installation in progress
bs: Instalacija bootloadera u toku

en: , using command %s
bs: , koristeći komandu %s

en: Alt and Shift keys simultaneously
bs: Alt i Shift tipke istovremeno

en: Flags
bs: Flagovi

en: Add/Del Users
bs: Dodaj/obriši korisnike

en: Host/network IP address missing.
bs: Nedostaje IP adresa računara/mreže.

en: weekly
bs: sedmično

en: Settings
bs: Podešavanja

en: The entered host/network IP is not correct.
bs: Unesena IP adresa računara/mreže nije ispravna.

en: Create/Transfer backup keys for SSH
bs: Napravi/premjesti backup ključeve za SSH

en: Here is the full list of available countries
bs: Ovdje je puna lista svih dostupnih država

en: Alternative test page (A4)
bs: Alternativna testna strana (A4)

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
bs: Ako imate sve CDe na listi, kliknite na U redu.
    Ako nemate nijedan od ovih CDova, kliknite na Odustani.
    Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na U redu.

en: Wait please
bs: Molim sačekajte

en: Backup user files
bs: Backup korisničkih datoteka

en: New
bs: Novi

en: This is the most crucial decision point for the security of your GNU/Linux
    system: you have to enter the "root" password. "Root" is the system
    administrator and is the only user authorized to make updates, add users,
    change the overall system configuration, and so on. In short, "root" can
    do everything! That is why you must choose a password that is difficult to
    guess - DrakX will tell you if the password that you chose too easy. As you
    can see, you are not forced to enter a password, but we strongly advise you
    against this. GNU/Linux is just as prone to operator error as any other
    operating system. Since "root" can overcome all limitations and
    unintentionally erase all data on partitions by carelessly accessing the
    partitions themselves, it is important that it be difficult to become
    "root".
    
    The password should be a mixture of alphanumeric characters and at least 8
    characters long. Never write down the "root" password -- it makes it far
    too easy to compromise a system.
    
    One caveat -- do not make the password too long or complicated because you
    must be able to remember it!
    
    The password will not be displayed on screen as you type it in. To reduce
    the chance of a blind typing error you will need to enter the password
    twice. If you do happen to make the same typing error twice, this
    ``incorrect'' password will be the one you will have use the first time you
    connect.
    
    If you wish access to this computer to be controlled by an authentication
    server, click the "%s" button.
    
    If your network uses either LDAP, NIS, or PDC Windows Domain authentication
    services, select the appropriate one for "%s". If you do not know which
    one to use, you should ask your network administrator.
    
    If you happen to have problems with remembering passwords, if your computer
    will never be connected to the internet or that you absolutely trust
    everybody who uses your computer, you can choose to have "%s".
bs: Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sistema: trebate
    unijeti "root" šifru, "Root" je sistemski administrator i jedini
    korisnik kojem je dozvoljeno da updatuje sistem, dodaje druge korisnike,
    mijenja konfiguraciju sistema itd. Ukratko, "root" može raditi sve! Stoga
    trebate izabrati šifru koju je teško pogoditi - DrakX će vam reći da li je šifra
    koju ste odabrali prelagana. Kao što možete vidjeti, niste prisiljeni da
    unesete šifru, ali vam savjetujemo da to uradite. GNU/Linux je podložan
    operatorskim greškama kao i bilo koji drugi operativni sistem. Pošto
    "root" može prevazići sva ograničenja i nenamjerno pobrisati sve podatke
    na particijama neoprezno im pristupajući, važno je da je teško postati "root".
    
    Šifra treba biti kombinacija alfanumeričkih znakova i biti barem 8 znakova
    duga. Nikad ne zapisujte "root" šifru -- time vaš sistem postaje lagano
    kompromitovati.
    
    Jedan izuzetak -- ne dozvolite da šifra bude preduga ili prekomplikovana
    pošto ćete je morati zapamtiti!
    
    Šifra neće biti prikazana na ekranu dok je unosite. Da bismo smanjili
    mogućnost greške zbog kucanja naslijepo, moraćete unijeti šifru dva puta.
    Ako nekim slučajem ponovite istu grešku dva puta, ovu ''neispravnu'' šifru
    trebate koristiti prilikom prve prijave.
    
    Ako želite da pristup ovom računaru bude kontroliran pomoću servera za
    autentikaciju, kliknite na dugme "%s".
    
    Ako vaša mreža koristi LDAP, NIS ili PDC Windows domen autentikacione
    servise, izaberite odgovarajući kao "%s". Ako ne znate koji
    koristiti, pitajte vašeg mrežnog administratora.
    
    Ako imate problema sa pamćenjem šifara, možete izabrati opciju "%s",
    pod uslovom da vaš računar neće biti spojen na Internet i da
    vjerujete svakome ko mu ima fizički pristup.

en: Name resolution spoofing protection
bs: Zaštita od lažiranja rezolucije imena

en: At this point, DrakX will allow you to choose the security level desired
    for the machine. As a rule of thumb, the security level should be set
    higher if the machine will contain crucial data, or if it will be a machine
    directly exposed to the Internet. The trade-off of a higher security level
    is generally obtained at the expense of ease of use.
    
    If you do not know what to choose, stay with the default option.
bs: Na ovom mjestu, DrakX vam omogućuje da izaberete sigurnosni nivo
    koji želite imati na ovom računaru. Kao pravilo, sigurnosni nivo treba biti
    tim viši što su važniji podaci na računaru, a pogotovo ako će računar biti
    direktno izložen Internetu. Većim nivoom sigurnosti obično gubite na
    jednostavnosti korištenja.
    
    Ako ne znate šta izabrati, zadržite ponuđenu opciju.

en: Load from floppy
bs: Učitaj sa diskete

en: The following printer was auto-detected.
bs: Sljedeći štampač je prepoznat automatski.

en: Uses command %s
bs: Koristi naredbu %s

en: Boot Floppy
bs: Boot disketa

en: Norwegian
bs: Norveška

en: Searching for new scanners ...
bs: Tražim nove skenere ...

en: stepping of the cpu (sub model (generation) number)
bs: stepping procesora (broj pod-modela / generacije)

en: select path to restore (instead of /)
bs: izaberite stazu za vraćanje (umjesto / )

en: Configure bootsplash picture
bs: Podesite bootsplash sliku

en: Georgia
bs: Gruzija

en: China
bs: Kina

en:  (Make sure that all your printers are connected and turned on).
bs: (Provjerite da li su svi štampači spojeni i upaljeni).

en: Reading data of installed printers...
bs: Čitam podatke instaliranih štampača...

en:  Erase Now
bs:  Obriši odmah

en: Insert a FAT formatted floppy in drive %s
bs: Ubacite FAT formatiranu disketu u jedinicu %s

en: yes means the processor has an arithmetic coprocessor
bs: da znači da procesor ima aritmetički koprocesor

en: Please Wait... Applying the configuration
bs: Molim sačekajte... Primjenjujem konfiguraciju

note: -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) -PO: and keep them smaller than 79 chars long
en: Welcome to GRUB the operating system chooser!
bs: Dobro došli u GRUB izbornik operativnog sistema!

en: SCSI controllers
bs: SCSI kontroleri

en:  on LPD server "%s", printer "%s"
bs: na LPD serveru "%s", štampač "%s"

en: Choosing a display manager
bs: Izbor display managera

en: Zeroconf Host name
bs: Zeroconf Ime računara

en: Custom setup/crontab entry:
bs: Vlastito podešavanje/crontab unos:

en: IP address should be in format 1.2.3.4
bs: IP adresa treba biti u formatu 1.2.3.4

en: Configure CUPS printing system
bs: Podesite CUPS sistem štampe

en: Ecuador
bs: Ekvador

en: Add an item
bs: Dodaj stavku

en: The printers on this machine are available to other computers
bs: Štampači na ovom računaru su dostupni drugim računarima

en: I can't find needed image file `%s'.
bs: Ne mogu pronaći potrebnu image datoteku '%s'

en: No sound card detected. Try "harddrake" after installation
bs: Nije otkrivena zvučna kartica. Probajte "harddrake" poslije instalacije

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
bs: Zadan je neispravan port: %s.
    Odgovarajući format je "port/tcp" ili "port/udp", 
    gdje je "port" cijeli broj između 1 i 65535.

en: Sao Tome and Principe
bs: Sao Tome i Principe

en: Can't login using username %s (bad password?)
bs: Ne mogu se prijaviti koristeći korisničko ime %s (pogrešna šifa?)

en: Azerbaidjani (latin)
bs: Azerbejdžanska (latinica)

en: Package not installed
bs: Paket nije instaliran

en: American Samoa
bs: Američka Samoa

en: Become a MandrakeExpert
bs: Postanite MandrakeExpert

en: Protocol
bs: Protokol

en: Copy fonts on your system
bs: Kopiraj fontove na sistem

en: Harddrake help
bs: Harddrake pomoć

en: Mandrake Terminal Server Configuration
bs: Podešavanje Mandrake Terminal servera

en: 
                        DrakBackup Report Details
bs: 
                        DrakBackup Detalji izvještaja

en: Restore all backups
bs: Vrati sve backupe

en:  on parallel port #%s
bs:  na paralelnom portu #%s

en: Set the password minimum length and minimum number of digit and minimum number of capitalized letters.
bs: Podesite minimalnu dužinu šifre, minimalan broj cifara i minimalan broj velikih slova.

en: if set to yes, check open ports.
bs: ako je postavljeno na da, provjerava otvorene portove.

en: This may take a moment to erase the media.
bs: Potrebno je par trenutaka da se obriše medij.

en: You can't select/unselect this package
bs: Ne možete izabrati/isključiti ovaj paket

en: Warning
bs: Upozorenje

en: 
    - Other Files:
bs: 
    - ostale datoteke:

en: Remote host name
bs: Ime udaljenog računara

en: access to X programs
bs: pristup X programima

en: Computing the size of the Windows partition
bs: Izračunavam veličinu Windows particije

en: /_Refresh
bs: /_Osvježi

en: Italy
bs: Italija

en: Cayman Islands
bs: Kajmanska ostrva

en: Name of printer
bs: Naziv štampača

en: disable
bs: isključi

en: error unmounting %s: %s
bs: greška u demontiranju %s: %s

en: Do it!
bs: Uradi!

en: %s not responding
bs: %s ne odgovara

en: Select model manually
bs: Izaberite model ručno

en: Format
bs: Formatiraj

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
bs: Najčešći način za konekciju sa adsl-om je pppoe.
    Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.
    Ako ne znate, izaberite 'koristi pppoe'

en: Various
bs: Razno

en: Left Alt key
bs: Lijeva Alt tipka

en: Load setting
bs: Podešavanje opterećenja

en: 
    
    Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.
bs: 
    
    Printerdrake nije mogao odrediti model vašeg %s štampača. Molim izaberite odgovarajući model na listi.

en: Set selected printer as the default printer
bs: Podesi izabrani štampač kao podrazumjevani

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
bs: 
    Označite štampače koje ćete prebacivati i kliknite na 
    "Prebaci".

en: Albanian
bs: Albanska

en: Lithuania
bs: Litvanija

en: Compact
bs: Kompaktno

en: Detected model: %s %s
bs: Detektovani model: %s %s

en: MandrakeSoft has selected the best software for you
bs: MandrakeSoft je izabrao najbolji softver za vas

en: Local files
bs: Lokalne datoteke

en: maybe
bs: možda

en: Can't open %s!
bs: Ne mogu otvoriti %s!

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
bs: Izgleda da vaša grafička kartica ima TV-OUT konektor.
    On se može podesiti da radi koristeći frame-buffer.
    
    Za ovo je potrebno da uključite grafičku karticu u TV prije nego što upalite računar.
    Zatim u meniju bootloadera izaberite opciju "TVout"
    
    Imate li ovu mogućnost?

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
bs: Upravo ćete podesiti štampanje na Windows račun zaštićen šifrom. Zbog propusta u arhitekturi Samba klijentskog softvera, šifra je stavljena u običnom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka štampe Windows serveru. Stoga je moguće da drugi korisnici ovog istog računara prikažu šifru na ekranu koristeći komandu kao što je "ps auxwww".
    
    Preporučujemo korištenje jedne od sljedećih alternativa (u svakom slučaju pobrinite se da samo računari na vašoj lokalnoj mreži imaju pristup Windows serveru, na primjer koristeći firewall):
    
    Koristite račun bez šifre na Windows serveru, kao što je "GUEST" račun ili poseban račun posvećen štampanju. Nemojte ukloniti zaštitu šifrom sa vašeg ličnog računa ili administratorskog računa.
    
    Podesite vaš Windows server tako da je štampač dostupan pod LPD protokolom. Zatim podesite štampanje na ovom računaru uz konekciju tipa "%s" u Printerdrake-u.

en: 65 thousand colors (16 bits)
bs: 65 hiljada boja (16 bita)

en: 
    - Save on Hard drive on path: %s
bs: 
    - spasi na hard disku u direktoriju: %s

en: Remove fonts on your system
bs: Pobriši fontove sa mog sistema

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
bs: Upozorenje, mrežni adapter (%s) je već podešen.
    
    Da li želite automatsko ponovno podešavanje?
    
    To možete obaviti ručno, ali morate znati šta radite.

en: Graphical interface at startup
bs: Grafički interfejs pri pokretanju

en:  adsl
bs:  ADSL

en: format of floppies supported by the drive
bs: format disketa koje podržava jedinica

en: Firmware copy failed, file %s not found
bs: Kopiranje firmware-a nije uspjelo, datoteka %s nije pronađena

en: Not enough partitions for RAID level %d
bs: Nema dovoljno particija za RAID nivo %d

en: local config: true
bs: lokalni config: da

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
bs: Sljedeći štampači su podešeni. Kliknite dva puta na neki od njih za izmjenu postavki; ako ga želite učiniti podrazumijevanim štampačem; ili da biste vidjeli informacije o njemu.

en: Connected
bs: Konektovan

en: Macedonian
bs: Makedonska

en: Bridges and system controllers
bs: Mostovi (bridges) i sistemski kontroleri

en: /File/_Save
bs: /Datoteka/_Sačuvaj

en: No details
bs: Sakrij detalje

en: very nice
bs: vrlo fino

en: Preview
bs: Pregled

en: Remote Control
bs: Udaljena kontrola

en: Please select media for backup...
bs: Molim izaberite medij za backup...

en: Wrong email
bs: Pogrešan e-mail

en: Allow Thin Clients
bs: Omogući thin klijente

en: Georgian ("Russian" layout)
bs: Gruzijska ("ruski" izgled)

en: /_Options
bs: /_Opcije

en: Your printer model
bs: Model vašeg štampača

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
bs: 
    
    (PAŽNJA! Vi koristite XFS za vašu root particiju,
    pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće
    raditi, pošto XFS traži veoma velik drajver).

en: 
    - Delete hard drive tar files after backup.
bs: 
    - Obriši tar datoteke sa diska nakon backupa.

en: No CD or DVD image found, please copy the installation program and rpm files.
bs: Nije pronađena nijedna CD ili DVD slika, molim kopirajte instalacioni program i rpm datoteke.

en: Mandrake's multipurpose configuration tool
bs: Mandrake višenamjenski alat za podešavanje

en: Save
bs: Spasi

en: The %s is unsupported
bs: %s nije podržan

en: Load the drivers for your usb devices.
bs: Pokreće drajvere za vaše USB uređaje.

en: Enter a printer device URI
bs: Unesite URI uređaja štampača

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community.
bs: Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. Vaš novi operativni sistem je rezultat zajedničkog rada Linux zajednice širom svijeta.

en: Israel
bs: Izrael

en: French Guiana
bs: Francuska Gvajana

en: A command line must be entered!
bs: Trebate unijeti komandnu liniju!

en: Select user manually
bs: Ručno izaberite korisnika

en: Transfer printer configuration
bs: Premještanje konfiguracije štamapča

en: Do you want to enable printing on the printers mentioned above?
bs: Da li želite omogućiti štampanje na gore navedenim štampačima?

en: Check additions/removals of suid root files
bs: Provjeri dodavanje/brisanje suid root datoteka

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
bs: Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrši:
     C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add
    i restartuje server. Takođe će vam trebati korisničko ime i šifra administratora domena da biste pridružili računar Windows(tm) domenu.
    Ako mreža još nije aktivirana, DrakX će pokušati pristupanje domenu tek nakon što prođete kroz korak podešavanja mreže.
    Ako ovo podešavanje iz nekog razloga ne uspije i prijava na domen ne bude izvršena, izvršite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći vašu Windows(tm) domenu, kao i administratorovo korisničko ime i šifru nakon pokretanja sistema.
    Naredba 'wbinfo -t' će provjeriti da li su vaši podaci ispravni.

en: Use network connection to backup
bs: Koristi mrežnu konekciju za backup

en: Kernel version
bs: Kernel verzija

en: It is now time to specify which programs you wish to install on your
    system. There are thousands of packages available for Mandrake Linux, and
    to make it simpler to manage the packages have been placed into groups of
    similar applications.
    
    Packages are sorted into groups corresponding to a particular use of your
    machine. Mandrake Linux has four predefined installations available. You
    can think of these installation classes as containers for various packages.
    You can mix and match applications from the various groups, so a
    ``Workstation'' installation can still have applications from the
    ``Development'' group installed.
    
     * "%s": if you plan to use your machine as a workstation, select one or
    more of the applications that are in the workstation group.
    
     * "%s": if plan on using your machine for programming, choose the
    appropriate packages from that group.
    
     * "%s": if your machine is intended to be a server, select which of the
    more common services you wish to install on your machine.
    
     * "%s": this is where you will choose your preferred graphical
    environment. At least one must be selected if you want to have a graphical
    interface available.
    
    Moving the mouse cursor over a group name will display a short explanatory
    text about that group. If you unselect all groups when performing a regular
    installation (as opposed to an upgrade), a dialog will pop up proposing
    different options for a minimal installation:
    
     * "%s": install the minimum number of packages possible to have a
    working graphical desktop.
    
     * "%s": installs the base system plus basic utilities and their
    documentation. This installation is suitable for setting up a server.
    
     * "%s": will install the absolute minimum number of packages necessary
    to get a working Linux system. With this installation you will only have a
    command line interface. The total size of this installation is about 65
    megabytes.
    
    You can check the "%s" box, which is useful if you are familiar with the
    packages being offered or if you want to have total control over what will
    be installed.
    
    If you started the installation in "%s" mode, you can unselect all groups
    to avoid installing any new package. This is useful for repairing or
    updating an existing system.
bs: Sada je vrijeme da izaberete koje programe želite instalirati na vaš
    sistem. Za Mandrake Linux su dostupne hiljade paketa, pa da bi
    njihovo upravljanje bilo lakše, organizovani su u grupe slične
    primjene.
    
    Paketi su sortirani u grupe ovisno o tipičnoj namjeni vašeg računara.
    Mandrake Linux sadrži četiri predefinisane instalacije. Ove klase
    instalacije možete zamisliti kao kontejnere za razne pakete. Možete
    miješati i poklapati aplikacije iz raznih grupa, pa tako instalacija ''Radna
    stanica'' može sadržavati aplikacije iz grupe ''Programiranje''.
    
     * "%s": ako planirate da koristite vaš računar kao radnu stanicu, izaberite
    jednu ili više aplikacija koje se nalaze u ovoj grupi.
    
     * "%s": ako planirate koristiti vaš računar za programiranje, izaberite
    odgovarajuće pakete iz ove grupe.
    
     * "%s": ako je vaš računar zamišljen kao server, izaberite koje od
    uobičajenih servisa želite instalirati na vaš računar.
    
     * "%s": ovdje možete izabrati vašu preferiranu grafičku okolinu. Barem
    jedna od njih mora biti izabrana ako želite da imate grafički interfejs.
    
    Držanjem kursora miša iznad imena grupe će nakratko prikazati kratko
    objašnjenje o pojedinoj grupi. Ako isključite sve grupe prilikom obavljanja
    obične instalacije (a ne upgrade), iskočiće dijalog koji vam nudi razne
    opcije za minimalnu instalaciju:
    
     * "%s": instalira minimalan mogući broj paketa potrebnih da imate
    funkcionalan grafički desktop.
    
     * "%s": instalira bazni sistem plus osnovne alate i njihovu
    dokumentaciju.
     Ova instalacija je prikladna za podešavanje servera.
    
     * "%s": ovo će instalirati apsolutni minimum paketa potrebnih da imate
    funkcionalan Linux sitsem. Sa ovom instalacijom imaćete samo komandnu
    liniju. Ukupna veličina ove instalacije je oko 65 megabajta.
    
    Možete aktivirati opciju "%s", koja je zgodna ako se upoznati sa ponuđenim
    paketima ili ako želite imati potpunu kontrolu nad onim što će se instalirati.
    
    Ako ste započeli instalaciju u "%s" režimu, možete isključiti sve grupe
    kako biste izbjegli instalaciju bilo kojeg novog paketa. Ovo je pogodno za
    popravljanje ili unaprjeđenje postojećeg sistema.

en: Accept user
bs: Prihvati korisnika

en: Left Shift key
bs: Lijeva Shift tipka

en:  local network
bs:  lokalna mreža

en: Bad choice, try again
bs: Pogrešan izbor, pokušajte ponovo

en: Syslog reports to console 12
bs: Syslog izvještaji na konzoli 12

en: Search new servers
bs: Traži nove servere

en: Heard and McDonald Islands
bs: Heard ostrvo i McDonaldova ostrva

en: No alternative driver
bs: Nema alternativnog drajvera

en: Toggle to expert mode
bs: Prebaci u ekspertni mod

en: (on this machine)
bs: (na ovom računaru)

en: Gateway address should be in format 1.2.3.4
bs: Gateway adresa treba biti u formatu 1.2.3.4

en: "%s" based winmodem detected, do you want to install needed software ?
bs: Otkrio sam winmodem baziran na "%s" chipsetu, želite li instalirati odgovarajući software ?

en: Looking at packages already installed...
bs: Tražim već instalirane pakete...

en: Use Differential Backups
bs: Koristi diferencijalni backup

en: Driver
bs: Drajver

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
bs: Linuxconf će ponekad obaviti raznolike zadatke tokom boota
    kako bi se održala sistemska konfiguracija.

en: DVD-R device
bs: DVDR uređaj

en: Printer on remote lpd server
bs: Štampač na udaljenom lpd serveru

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
bs: Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i instalirate na va[em sistemu.
    
    -Možete instalirati fontove koristeći uobičajen način. U rijetkim slučajevima, neispravni fontovi mogu zaglaviti vaš X Server.

en: Wednesday
bs: Srijeda

en: Germany
bs: Njemačka

en: Austria
bs: Austrija

en: No mouse
bs: Bez miša

en: Choose your CD/DVD media size (MB)
bs: Izaberite veličinu vašeg CD/DVD medija (MB)

en: Check permissions of files in the users' home
bs: Provjeri privilegije datoteka u korisničkom home-u.

en: Run "sndconfig" after installation to configure your sound card
bs: Pokrenite "sndconfig" poslije instalacije kako biste podesili vašu zvučnu karticu

en: Collapse Tree
bs: Smanji stablo

en: Auto Install Configurator
bs: Podešavanje auto instalacije

en: Configure networking
bs: Podešavanje mreže

en: Where do you want to install the bootloader?
bs: Gdje želite smjestiti bootloader?

en: Your choice of preferred language will affect the language of the
    documentation, the installer and the system in general. Select first the
    region you are located in, and then the language you speak.
    
    Clicking on the "%s" button will allow you to select other languages to
    be installed on your workstation, thereby installing the language-specific
    files for system documentation and applications. For example, if you will
    host users from Spain on your machine, select English as the default
    language in the tree view and "%s" in the Advanced section.
    
    Note that you're not limited to choosing a single additional language. You
    may choose several ones, or even install them all by selecting the "%s"
    box. Selecting support for a language means translations, fonts, spell
    checkers, etc. for that language will be installed. Additionally, the
    "%s" checkbox allows you to force the system to use unicode (UTF-8). Note
    however that this is an experimental feature. If you select different
    languages requiring different encoding the unicode support will be
    installed anyway.
    
    To switch between the various languages installed on the system, you can
    launch the "/usr/sbin/localedrake" command as "root" to change the
    language used by the entire system. Running the command as a regular user
    will only change the language settings for that particular user.
bs: Vaš izbor preferiranog jezika će se odraziti na jezik dokumentacije,
    instalacione procedure i generalno sistema. Najprije izaberite oblast u
    kojoj se nalazite, a zatim jezik kojim govorite.
    
    Klikanjem na dugme "%s" možete izabrati druge jezike koje
    želite instalirati na vašu radnu stanicu, time instalirajući sistemsku
    dokumentaciju i aplikacije za svaki od izabranih jezika. Na primjer, ako
    će vaš računar koristiti osobe iz španije, izaberite Engleski kao osnovni
    jezik na listi, a "%s" u oblasti Više opcija.
    
    Obratite pažnju da niste ograničeni na samo jedan dodatni jezik. Možete
    ih izabrati nekoliko ili čak ih instalirati sve klikom na polje "%s".
    Vaš izbor podrške za neki jezik označava da će biti instaliran prijevod,
    fontovi, pravila za provjeru pravopisa itd. za taj jezik. Pored toga,
    opcija "%s" će prisiliti upotrebu Unicode-a (UTF-8) na cijelom
    sistemu. No, obratite pažnju da je ovo eksperimentalna mogućnost. Ako
    izaberete nekoliko jezika koji zahtijevaju različito kodiranje, Unicode će
    svejedno biti instaliran.
    
    Da biste izabrali između raznih jezika instaliranih na vašem sistemu, možete
    pokrenuti kao "root" naredbu "/usr/sbin/localedrake", čime mijenjate
    jezik koji koristi čitav sistem. Izvršavanjem te naredbe kao običan
    korisnik mijenjate jezičke postavke samo za tog konkretnog korisnika.

en: The %s is not supported by this version of Mandrake Linux.
bs: Ova verzija Mandrake Linuxa ne podržava %s,

en: tape
bs: traka

en: DHCP client
bs: DHCP klijent

en: List users on display managers (kdm and gdm)
bs: Izlistaj korisnike na display manager-ima (kdm i gdm)

en: Logitech Mouse (serial, old C7 type)
bs: Logitech Mouse (serijski, stari C7 tip)

en: Restoring from file %s failed: %s
bs: Povratak iz datoteke %s nije uspio: %s

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
bs: Ne mogu pročitati tabelu particija na uređaju %s, previše je oštećena za mene :(
    Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).
    Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.
    (greška je %s)
    
    Slažete li se sa gubitkom svih particija?

en: Find Package
bs: Nađi paket

en: Are you sure that you want to set up printing on this machine?
bs: Sigurno želite podesiti štampanje na ovom računaru?

en: New devfs device
bs: Novi devfs uređaj

en: ERROR: Cannot spawn %s.
bs: GREŠKA: Ne mogu pokrenuti %s.

en: Boot Style Configuration
bs: Konfiguracija stila boota

en: Automatic time synchronization
bs: Automatska sinhronizacija vremena

en: Backup files not found at %s.
bs: Backup datoteke nisu pronađene na %s.

en: Armenian (phonetic)
bs: Armenska (fonetska)

en: Card model:
bs: Model kartice:

en: Thin Client
bs: Thin klijenti

en: Thank you for choosing Mandrake Linux 9.2
bs: Hvala vam što ste odabrali Mandrake Linux 9.2

en: Start Server
bs: Pokreni server

en: All remote machines
bs: Svi udaljeni računari

en: Install themes
bs: Instaliraj teme

en: Preparing installation
bs: Pripremam instalaciju

en: Edit selected host/network
bs: Izmijeni izabrani računar/mrežu

en: Add User -->
bs: Dodaj korisnika -->

en: True Type fonts installation
bs: Instalacija True Type fontova

en: Auto-detect printers connected directly to the local network
bs: Automatski prepoznaj štampače spojene direktno na lokalnu mrežu

en: LAN configuration
bs: Podešavanje LANa

en: hard disk model
bs: model hard diska

en: You can't use a LVM Logical Volume for mount point %s
bs: Ne možete koristiti LVM logički volumen za tačku montiranja %s

en: Get Windows Fonts
bs: Preuzmi fontove iz Windowsa

en: Iranian
bs: Iranska

en: Croatia
bs: Hrvatska

en: Add server
bs: Dodaj server

en: Remote printer name
bs: Ime udaljenog štampača

en: MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together  in order to highly reduce hacking risks.
bs: MandrakeSoft je dizajnirao ekskluzivne alate koji rezultiraju do sada najsigurnijom verzijom Linuxa: Draksec, alat za upravljanje sistemskom sigurnošću, kao i moćan firewall su udruženi kako bi drastičnosmanjili rizik od provale u sistem.

en: Device:
bs: Uređaj:

en: License agreement
bs: Licencni ugovor

en: System Options
bs: Sistemske opcije

en: Please choose the desired security level
bs: Molim izaberite nivo sigurnosti

en: This host is already in the list, it cannot be added again.
bs: Ovaj računar je već na listi, ne možete ga ponovo dodati.

en: , USB printer
bs: , USB štampač

en: Unable to properly close mkbootdisk:
    
    <span foreground="Red"><tt>%s</tt></span>
bs: Ne mogu ispravno zatvoriti mkbootdisk:
    
    <span foreground="Red"><tt>%s</tt></span>

en: Incremental backups only save files that have changed or are new since the last backup.
bs: Inkrementalni backupi snimaju samo datoteke koje su promijenjene ili nove od zadnjeg backupa.

en: Choose the applications that will support the fonts:
bs: Izaberite aplikacije koje će podržavati fontove :

en: Configure X
bs: Podešavanje X

en: Turkish (traditional "F" model)
bs: Turska (tradicionalni "F" model)

en: Congratulations!
bs: Čestitamo!

en: Use owner id for execution
bs: Koristi id vlasnika za izvršavanje

en: Allow remote root login
bs: Dozvoli prijavu kao root putem mreže

en: Down
bs: Dolje

en: Raw printer (No driver)
bs: Sirovo štampanje (Bez drajvera)

en: Install rpm
bs: Instaliraj RPM

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
bs: Za štampanje datoteke sa komandne linije (terminalski prozor) možete koristiti ili komandu "%s <datoteka>" ili grafički alat za štampu: "xpp <datoteka>" ili "kprinter <datoteka>". Grafički alati vam omogućuju da jednostavno odaberete štampač i izmjenite podešenja opcija.

en: Time remaining
bs: Preostalo vremena

en: UK keyboard
bs: UK tastatura

en: Unmount
bs: Demontiraj

en: Uninstall Fonts
bs: Deinstaliraj fontove

en: German (no dead keys)
bs: Njemačka (bez mrtvih tipki)

en: 	Send mail to %s
bs: 	Šalji mail na %s

en: Transferring %s...
bs: Prebacujem %s ...

en: 32 thousand colors (15 bits)
bs: 32 hiljada boja (15 bita)

en: You can export using NFS or Samba. Please select which you'd like to use.
bs: Možete eksportovati koristeći NFS ili Sambu. Molim izaberite koji želite koristiti.

en: Reboot
bs: Restartuj

en: Gambia
bs: Gambija

en: Mandrake Control Center
bs: Mandrake Kontrolni centar

en: Multi-function device
bs: Višenamjenski uređaj

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
bs: Ovdje možete unijeti razne portove. 
    Primjeri ispravno unesenih portova su: 139/tcp 139/udp.
    Pogledajte datoteku /etc/services za više informacija.

en: 	-Tape
bs: 	-Traka

en: No browser is installed on your system, Please install one if you want to browse the help system
bs: Nemate nijedan browser instaliran na vašem sistemu. Molim instalirajte jedan ako želite pristupiti sistemu pomoći

en: Remember this password
bs: Zapamti ovu šifru

en: Internet Connection Sharing is now enabled.
bs: Dijeljenje Internet konekcije je sada uključeno.

en: 	-Network by SSH.
bs: 	-Mrežu preko SSH.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
bs: Ako je željeni štampač automatski prepoznat, jednostavno ga izaberite sa liste i dodajte korisničko ime, šifru i/ili radnu grupu ako je to potrebno.

en:  cable
bs:  kabl

en: Use the free space on the Windows partition
bs: Koristi slobodan prostor na Windows particiji

en: %s found on %s, configure it automatically?
bs: %s je pronađen na %s, da ga podesim automatski?

en: XFree86 driver: %s
bs: XFree86 drajver: %s

en: This host/network is already in the list, it cannot be added again.
bs: Ovaj računar/mreža je već na listi, ne možete ga ponovo dodati.

en: Choose the packages you want to install
bs: Izaberite pakete koje želite instalirati

en: Papua New Guinea
bs: Papua Nova Gvineja

en: Multi-function device on a parallel port
bs: Višenamjenski uređaj na paralelnom portu

en: Serbian (cyrillic)
bs: Srpska (ćirilica)

en: Enter the directory where backups are stored
bs: Unesite direktorij gdje su smješteni backupi

en: Make kernel message quiet by default
bs: Kernel poruke podrazumijevano tihe

en: Do you want to set this printer ("%s")
    as the default printer?
bs: Da li želite da podesite ovaj štampač ("%s")
    kao podrazumjevani štampač?

en: The DHCP end range
bs: Kraj DHCP raspona

en: Creating bootdisk...
bs: Pravim boot disketu...

en: Wait please, testing your connection...
bs: Molim sačekajte, probavam vašu konekciju...

en: Bringing down the network
bs: Zaustavljam mrežu

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
bs: NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.
    Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka.

en: DHCP Client
bs: DHCP klijent

en: dismiss
bs: otkaži

en: Printing/Scanning on "%s"
bs: Štampam/skeniram na "%s"

en: omit raid modules
bs: izostavi raid module

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
bs: lpd je demon za štampu koji je potreban da bi lpr sistem štampe radio ispravno.
    To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima.

en: Irish
bs: Irski

en: Sunday
bs: Nedjelja

en: Internet Connection Configuration
bs: Podešavanje Internet konekcije

en: comma separated numbers
bs: brojevi razdvojeni zarezom

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
bs: Nakon što izaberete uređaj, moći ćete vidjeti informacije o uređaju u poljima u desnom okviru ("Informacije")

en: Move selected rule up one level
bs: Pomjeri izabrano pravilo za jedan nivo gore

en: The following scanner
    
    %s
    is available on your system.
bs: Sljedeći skener
    
    %s
    je dostupan na vašem sistemu.

en: Do you really want to remove the printer "%s"?
bs: Da li želite da uklonite štampač "%s"?

en: I can't find any room for installing
bs: Ne mogu naći dovoljno prostora za instalaciju

en: Default printer
bs: Podrazumjevani štampač

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
bs: Podesili ste nekoliko načina za konekciju na Internet.
    Izaberite jedan od njih koji ćete koristiti.

en: Modify RAID
bs: Modificiraj RAID

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
bs: Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molim izaberite neku PCI karticu na idućem ekranu.

en: Add user
bs: Dodaj korisnika

en: RAID-disks %s
bs: RAID-diskovi %s

en: Liberia
bs: Liberija

en: Could not install the packages needed to set up a scanner with Scannerdrake.
bs: Ne mogu instalirati pakete koji su potrebni za podešavanje skenera pomoću Scannerdrake-a.

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
bs: Molim unesite naziv interfejsa spojenog na Internet.
    
    Primjeri:
    		ppp+ za modemsku ili DSL konekciju, 
    		eth0, ili eth1 za mrežnu konekciju, 
    		ippp+ za isdn konekciju.

en: Choose your keyboard
bs: Izaberite vašu tastaturu

en: Format partitions
bs: Formatiranje particija

en: Automatic correction of CUPS configuration
bs: Automatska ispravka konfiguracije CUPSa

en: Running "%s" ...
bs: Izvršavam "%s" ...

en: enable radio support
bs: uključi radio podršku

en: Scanner sharing to hosts:
bs: Dijeljenje skenera za računare:

en: Loopback file name: %s
bs: Naziv loopback datoteke: %s

en: Please choose the printer to which the print jobs should go.
bs: Molim izaberite štampač kojem želite slati zadatke štampe.

en: Do not transfer printers
bs: Nemoj prebacivati štampače

en: Delay before booting the default image
bs: Čekanje prije bootanja default image-a

en: 
     Copyright (C) 2001-2002 by MandrakeSoft 
         DUPONT Sebastien (original version)
         CHAUMETTE Damien <dchaumette\@mandrakesoft.com>
    
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
    
     Thanks:
        -  pfm2afm:   
    	 by Ken Borgendale:
    	    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
        -  type1inst:
    	 by James Macnicol: 
    	    type1inst generates files fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
                 Convert ttf font files to afm and pfb fonts
bs: 
     Copyright (C) 2001-2002 by MandrakeSoft 
    	DUPONT Sebastien (original version)
            CHAUMETTE Damien <dchaumette\@mandrakesoft.com>
    
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
    
      Hvala:
        -  pfm2afm:   
    	 autor: Ken Borgendale:
    	    Konvertuje Windows .pfm datoteke u .afm (Adobe Font Metrics)
        -  type1inst:
    	 autor: James Macnicol: 
    	    Generiše datoteke fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	  autor: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
                 Konvertuje ttf font datoteke u afm i pfb fontove

en: Use Hard Disk to backup
bs: Koristi hard disk za backup

en: Configure
bs: Podesi

en: Warning, another Internet connection has been detected, maybe using your network
bs: Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže

en: Backup Users
bs: Backup korisnika

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
bs: Molim unesite naziv vašeg računara ako ga znate.
    Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,
    kao što je ``mojcomp.mojlab.mojafirma.com''.
    Možete također unijeti IP adresu gateway-a ako ga imate

en: Select Printer Spooler
bs: Izaberite spooler štampača

en: Create new theme
bs: Napravi novu temu

en: Mandrake Tools Explanation
bs: Objašnjenja Mandrake alata

en: No image found
bs: Nije pronađen nijedan image

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
bs: Neki bitni paketi nisu ispravno instalirani.
    Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.
    Provjerite cdrom na instaliranom računaru koristeći "rpm -qpl Mandrake/RPMS/*.rpm"

en: Mandrake Linux 9.2: the ultimate development platform
bs: Mandrake Linux 9.2: vrhunska razvojna platforma

en: Detected model: %s
bs: Detektovan model: %s

en: "%s" is not a valid email!
bs: "%s" nije ispravan email!

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
bs: X11 Display Manager vam omogućuje da se grafički prijavite na vaš sistem uz pokretanje X Window Systema, a podržava i nekoliko različitih X sesija na vašem lokalnom računaru u isto vrijeme.

en: if set to yes, run the daily security checks.
bs: ako je postavljeno na da, izvršava dnevne sigurnosne provjere.

en: Azerbaijan
bs: Azerbejdžan

en: Device name to use for backup
bs: Ime uređaja kojeg ćete koristiti za backup

en: No tape in %s!
bs: Nema trake u %s!

en:  --doc <link>          - link to another web page ( for WM welcome frontend)
bs:  --doc <link>          - link na drugu web stranicu ( za WM pozdravni ekran)

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
bs: ovo je fizička sabirnica na koju je uređaj priključen (npr: PCI, USB, ...)

en: How is the printer connected?
bs: Kako je štampač povezan na računar?

en: Security level
bs: Nivo sigurnosti

en: final resolution
bs: krajnja rezolucija

en: Services
bs: Servisi

en: Office Workstation
bs: Uredska radna stanica

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
bs: Uredski programi: obrada teksta (kword, abiword), tablični alati (kspread, gnumeric), pdf preglednici itd.

en: Game station
bs: Stanica za igru

en: Amusement programs: arcade, boards, strategy, etc
bs: Zabavni programi: arkadne igre, stolne igre, strategije itd.

en: Multimedia station
bs: Multimedijalna stanica

en: Sound and video playing/editing programs
bs: Programi za pregled i editovanje zvuka i videa

en: Internet station
bs: Internet stanica

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
bs: Skup alata za čitanje i slanje pošte i news-a (pine, mutt, tin...) i pregledanje Weba

en: Network Computer (client)
bs: Mrežni računar (klijent)

en: Clients for different protocols including ssh
bs: Klijenti za razne protokole uključujući ssh

en: Configuration
bs: Podešavanje

en: Tools to ease the configuration of your computer
bs: Alati za lakše podešavanje računara

en: Scientific Workstation
bs: Znanstvena radna stanica

en: Scientific applications such as gnuplot
bs: Naučne aplikacije kao npr. GnuPlot

en: Console Tools
bs: Alati za konzolu

en: Editors, shells, file tools, terminals
bs: Editori, shellovi, alati za datoteke, terminali

en: KDE Workstation
bs: KDE radna stanica

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
bs: K Desktop Environment, osnovno grafičko okruženje sa izborom pratećih alata

en: Gnome Workstation
bs: GNOME radna stanica

en: A graphical environment with user-friendly set of applications and desktop tools
bs: Grafički okoliš sa skupom korisnički orjentisanih aplikacija i alata za radnu površinu

en: Other Graphical Desktops
bs: Ostale grafičke okoline

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
bs: Icewm, Window Maker, Enlightenment, Fvwm, itd.

en: C and C++ development libraries, programs and include files
bs: C i C++ biblioteke, programi i include datoteke

en: Documentation
bs: Dokumentacija

en: Books and Howto's on Linux and Free Software
bs: Knjige i howto-i na temu Linuxa i slobodnog softvera

en: Linux Standard Base. Third party applications support
bs: Linux Standard Base. Podrška za aplikacije trećih lica

en: Database
bs: Baze podataka

en: PostgreSQL or MySQL database server
bs: PostgreSQL ili MySQL baza podataka

en: Domain Name and Network Information Server
bs: Domain Name i Network Information Server

en: Set of tools to read and send mail and news and to browse the Web
bs: Skup alata za čitanje i slanje pošte i news-a i pregledanje weba
