path: root/perl-install/ChangeLog

2001/02/03  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
	auto_installs

	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
	the right charset the windows

	* install_steps_interactive.pm (selectLanguage): call charsetChanged

	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
	move ftp to SYSTEM so that it is installed

	* Makefile: install cardmgr

	* modules.pm (configure_pcmcia): cleanup

2001/02/02  dam's  <damien@mandrakesoft.com>

	* share/wizard.rc: added rc file for wizard mode

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
	fails and
	auto_install and not provided any info about the monitor

	* my_gtk.pm (gtkcreate_xpm): error handling with error message

	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP

	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
	/etc/sysconfig/i18n

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

	* install_any.pm (setPackages): in auto_installs, default to all groups
	chosen, unless
	compssUsersChoice exist. Won't change anything unless compssListLevel is
	used of course

	* Xconfigurator_consts.pm: add low_default_monitor for default of
	auto_installs

	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm

	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
	diskdrake.pm: using the new formatXiB

	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
	the fact that kernel
	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
	regexp now that ida/c0d0p? is no more at the beginning of the line.
	(get): cleanup, remove hasIDE hasSCSI...

	* common.pm (formatXiB): created, format a number in human readable format

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

2001/02/02  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
	standalone/diskdrake: recoded wizard mode
	corrected some stuff.
	trying not to break draknet for cooker snapshot

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
	fails and
	auto_install and not provided any info about the monitor

	* install_any.pm (setPackages): in auto_installs, default to all groups
	chosen, unless
	compssUsersChoice exist. Won't change anything unless compssListLevel is
	used of course

	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
	chose was glibc-2.1 :-(
	this one en_US and seems all right!

	* Xconfigurator_consts.pm: add low_default_monitor for default of
	auto_installs

	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
	diskdrake.pm: using the new formatXiB

	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
	/etc/sysconfig/i18n

	* common.pm (formatXiB): created, format a number in human readable format

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

2001/02/01  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: new draknet snapshot. Still unuseable

	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
	install.

2001/01/31  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corected translation and conflict.

2001/01/31  François Pons  <fpons@mandrakesoft.com>

	* modules.pm: added missing die if modprobe failed on live upgrade.

	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
	file
	if everything has been successfull.

	* install_steps.pm: changed to clean selection for non expert as used for
	group selection
	because it is not cleaned, need better solution TODO.

2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
	BEFORE COLON (:);
	and it is "Profile" and not "Profil")
	CV:
	----------------------------------------------------------------------

2001/01/31  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackagesTree): created, simple
	ask_many_from_list to choose
	individual packages
	(choosePackages): log for debug
	(choosePackages): don't ask to install in beginner. Max is chosen
	(setRootPassword): help not based on installClass being server or not
	(selectInstallClass): remove installClass choice (was
	normal/devel/server)
	(chooseGroups): fix for individual package selection flag

	* netconnect.pm (get_net_device): more cleanup syntax
	(get_net_device): cleanup syntax

	* install_steps.pm (selectLanguage): warning for debug
	(miscellaneousBefore): don't use installClass to decide to use
	supermount
	or not. Choice is done on $::corporate. Can't say "no supermount in
	server
	installs" anymore
	(selectInstallClass): emptied
	(setupSCSI): don't configure PCMCIA if there is no PCMCIA

	* install_any.pm (g_auto_install): installClass removed
	(setPackages): do not preselect compssUsers entries

	* install2.pm (main): don't set installClass=normal meta_class desktop
	(deprecated)
	(miscellaneous): TYPE= removed (was installClass)
	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
	ask in a set of possibilities
	($o): replace fclass by fbeginner and fexpert
	($o): default security level to 2 since it can't be based on
	installClass (deprecated)

	* install_steps_gtk.pm: restore window size for time being

	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate

	* Xconfigurator.pm (main): better error message for auto_install failing

	* interactive.pm (ask_many_from_list): fix sorting

	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
	drakx. Still
	need finding the guilty

2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: more kbd corrections
	fixed soem keybopard values

2001/01/31  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackagesTree): created, simple
	ask_many_from_list to choose
	individual packages
	(choosePackages): log for debug
	(choosePackages): don't ask to install in beginner. Max is chosen
	(setRootPassword): help not based on installClass being server or not
	(selectInstallClass): remove installClass choice (was
	normal/devel/server)
	(chooseGroups): fix for individual package selection flag

	* install_steps.pm (selectLanguage): warning for debug
	(miscellaneousBefore): don't use installClass to decide to use
	supermount
	or not. Choice is done on $::corporate. Can't say "no supermount in
	server
	installs" anymore
	(selectInstallClass): emptied
	(setupSCSI): don't configure PCMCIA if there is no PCMCIA

	* install_any.pm (g_auto_install): installClass removed
	(setPackages): do not preselect compssUsers entries

	* install2.pm (main): don't set installClass=normal meta_class desktop
	(deprecated)
	(miscellaneous): TYPE= removed (was installClass)
	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
	ask in a set of possibilities
	($o): replace fclass by fbeginner and fexpert
	($o): default security level to 2 since it can't be based on
	installClass (deprecated)

	* install_steps_gtk.pm: restore window size for time being

	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate

	* Xconfigurator.pm (main): better error message for auto_install failing

	* interactive.pm (ask_many_from_list): fix sorting

	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
	drakx. Still
	need finding the guilty

2001/01/30  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: new draknet. unstable

	* netconnect.pm: updated
	debugged network card configuration after pixelisation.

2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
	trying to set progressbar to more than 100% (rescue is more compressed
	than drakx)

	* share/rpmsrate: add ldetect to config stuff I want to have on all
	installs (lspcidrake)

2001/01/30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
	adapt format functions given to ask_from_listf. $_ is no more set

	* mouse.pm (detect): replace commands::modprobe by modules::load as it
	should (or??)

	* perl2etags: adapt to new etags (emacs 21) format

	* raid.pm (make): replace commands::modprobe by modules::load as it should
	(or??)

	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
	regexps

	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
	separator instead of ".".
	The sheer result is:
	"0.6" * 10  gives 0
	"0,6" * 10  gives 6
	
	So i have overwritten misc/LC_NUMERIC with
	/usr/share/locale/en/LC_NUMERIC and
	it works nicely now :)

2001/01/29  dam's  <damien@mandrakesoft.com>

	* standalone/drakboot: corrected typo

2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: 
	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
	"hd.img"
	  - following deprecation of "other.img", reintegrate big modules in
	relevant boot disks

2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/po/et.po: updated Estonian file

2001/01/29  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
	more than one ida/c0d0p*

2001/01/28  dam's  <damien@mandrakesoft.com>

	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  siegel

	* share/po/de.po: new german version

2001/01/26  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: updated embedded mode

	* standalone/drakboot: added embedded mode

2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
	bzlib

	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2

	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
	  - use bzlib instead of zlib to reduce overall size
	  - take home my own bzlib code to (1) reduce code size with good
	compile options (2) make it compile and link against dietlibc

	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib

	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/26  siegel

	* share/po/de.po: .

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/25  dam's  <damien@mandrakesoft.com>

	* install2.pm: disable steps 'packages choice', 'configure X', and
	'configure' 'printer'

	* install_steps_interactive.pm: don't oblige user addition

	* network.pm: display ethernet module

	* netconnect.pm: network informations filled into
	$prefix/var/lib/naat/configuration

2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
	/usr/bin/sh for stage2

	* mdk-stage1/probing.h: better tightness of probing stuff

	* mdk-stage1/probing.c: better tightness of probing stuff
	print warning message when insmod of PCI-detected device fails

	* mdk-stage1/stage1.c: 
	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
	  - remove fat/vfat modules from some boot floppies now that we don't
	need it anymore

	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
	tulip network cards, kernel-2.4 has strange way to classify some of its
	net modules..

2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: Waw, italian translator is very fast :)
	updated Indonesian and Italian fiels

	* share/po/id.po: updated Indonesian and Italian fiels

	* share/locales.tar.bz2: added iso9 locale definitions

	* lang.pm: fixed LANGUAGE for mk locale

2001/01/25  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (spawnShell): fix error message

2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: 
	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
	  - remove unecessary device files

	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia

2001/01/24  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun

	* install_steps.pm (afterInstallPackages): cleanup

	* interactive.pm: better documentation of ask_from_entries_refH features
	(entry)

2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: 
	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
	  - remove unecessary device files

	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia

2001/01/24  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun

	* install_steps.pm (afterInstallPackages): cleanup

	* interactive.pm: better documentation of ask_from_entries_refH features
	(entry)

2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file

2001/01/22  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
	added network conf save in /root/networking.tmp

2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: add automatic support in choice of NET device, in
	case of multiple NET devices
	consistent dot-terminated error messages, consistent no-dot log messages
	re-put Netmask input per default (void entry -> automatic guess)

	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
	dot-terminated error messages, consistent no-dot log messages

2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po: updated Indonesian file

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated po files

	* share/po/wa.po: updated po files
	updated pot file

	* install2.pm, lang.pm: fixed the places where console fonts and related
	files are put under
	/etc/sysconfig to the places really used by console-tools

	* share/po/DrakX.pot: updated pot file

	* share/po/hr.po: updated po files
	updated Croatian file

2001/01/22  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
	read_rpmsrate
	can be called standalone.

	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
	deprecated, replaced by !$::expert

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
	network/ftp installs

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (create_ctree): fix case with formatted list

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's

	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
	network/ftp installs

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (create_ctree): fix case with formatted list

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's

2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/nfsmount.c: fix remaining perror's

	* mdk-stage1/stage1.c: fix remaining perror's
	  - better msg in fatal errors
	  - do not include code to spawn a shell for releases

2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_

	* interactive.pm (ask_from_treelist_): created, split with the separator,
	call translate on
	words, then re-join.

2001/01/19  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixes for CD not changeable.

	* install_steps_interactive.pm: fixed unselect group and inoperant
	individual package selection.
	removed expert mode and install class.

2001/01/18  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fixed obligation of relative large install, now
	minimum is lesser.

	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
	to see why as it happens
	on install-abort-choices-install or
	install-abort-choices-fs-format(none)-choices-install

	* live_install: update live install to match /tmp/image instead of
	/tmp/rhimage.

2001/01/17  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
	/tmp/image.

	* pkgs.pm: update to use new header file format in hdlist (added arch) but
	depslist has not it...

	* install2.pm: fixes with /tmp/rhimage and /tmp/image

2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po: updated bulgarian file

2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/url.c: use strrchr instead of doing it by hand

	* mdk-stage1/insmod-busybox/busybox.h,
	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
	
	  - replace remaining perror's with log_perror's
	  - little code cleanup

	* mdk-stage1/stage1-data/stage1.tar.bz2,
	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0

	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
	  - add load of third party modules in Expert mode (PS rulz)

2001/01/12  siegel

	* share/po/de.po: updates

2001/01/12  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed addUser for invocation of
	any::ask_users.
	fixed bad invocation of installation of X server.

2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
	  - add wait_message for initializing of CDROM's (it can be long when
	it's SCSI)
	  - print CDROM drive names (model) in dialogs

	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
	  - fix behaviour with bad ISO images (DISK installs)
	  - better dialogs for DISK installs

2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: make lang list in format for tree-selector

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
	loopback situations
	act nicely when no partitions are found on some disk

	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
	and/or modules.dep available)

	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
	failing loopback situations
	better log messages
	continue anyway when insmod'ing of modules fail (for blank.img)

	* mdk-stage1/probing.c: close some fd's

	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
	situation (no modules and/or modules.dep available)
	continue anyway when insmod'ing of modules fail (for blank.img)

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
	  - add DISK install from ISO image file
	  - add FTP
	  - add HTTP
	  - use single place for mountpoints and static directories

	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
	  - add DISK install from ISO image file

	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
	  - add FTP
	  - add HTTP
	  - use single place for mountpoints and static directories

	* mdk-stage1/insmod-busybox/Config.h: tweak config

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* standalone/adduserdrake: adduserdrake may handles autologin

	* install_steps.pm (addUser): set autologin

	* install2.pm (addUser): moved setAuthentication to install_steps::addUser

	* install_steps_interactive.pm (addUser): fix

2001/01/11  dam's  <damien@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
	netconnect.pm: updated

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
	mar or marfiles not available to perform consistency check

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* interactive_gtk.pm (create_ctree): fix default value selecting failing
	(in case of "format")
	(ask_from_entries_refW): apply "format" on label when icon is missing
	for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
	icon is missing for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at
	the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake
	and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (autologin): moved to package any

	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
	icon is missing for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at
	the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake
	and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
	size

	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
	remove warnings from compile

2001/01/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
	callback on clist/list/ctree

	* install_steps.pm (addUser): use any::pack_passwd
	(setRootPassword): use any::unpack_passwd and any::pack_passwd

	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
	generic
	(autologin): use $install which is now generic

	* install_steps_interactive.pm (selectLanguage): many_languages choice
	moved there as advanced

	* my_gtk.pm (create_packtable): yet another try to have something nice :)
	!! uses Gtk::Table::attach_raw which is available in
	perl-GTK-0.7004-6mdk !!
	(create_box_with_title): with the size given to set_usize for the scroll
	containing the text widget in case of long text. and don't let the
	scroll
	grow.
	(gtktext_insert): remove adding an ending "\n" (no more needed?)

	* any.pm (setAutologin): cleanup
	(pack_passwd, unpack_passwd): created

2001/01/10  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm: corrected last message . firewall

2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
	parport*, plip)

2001/01/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
	callback on clist/list/ctree

	* install_steps.pm (addUser): use any::pack_passwd
	(setRootPassword): use any::unpack_passwd and any::pack_passwd

	* my_gtk.pm (create_packtable): yet another try to have something nice :)
	!! uses Gtk::Table::attach_raw which is available in
	perl-GTK-0.7004-6mdk !!
	(create_box_with_title): with the size given to set_usize for the scroll
	containing the text widget in case of long text. and don't let the
	scroll
	grow.
	(gtktext_insert): remove adding an ending "\n" (no more needed?)

	* any.pm (setAutologin): cleanup
	(pack_passwd, unpack_passwd): created

	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
	generic
	(autologin): use $install which is now generic

	* install_steps_interactive.pm (selectLanguage): many_languages choice
	moved there as advanced

	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
	standalone/livedrake, standalone/drakboot, standalone/draksec,
	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
	standalone/drakxservices, standalone.pm, standalone/draknet,
	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
	standalone/drakxconf: use standalone and standalone::pkgs_install

2001/01/09  Pixel  <pixel@mandrakesoft.com>

	* any.pm (drakx_version): nicer (4gc)

	* install2.pm (main): log::l the drakx_version

	* my_gtk.pm (create_packtable): no_expand option added

	* interactive.pm (ask_from_entries_refH_powered_normalize): field
	"disabled" added,
	"advanced_messages" added

	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
	(pack_langs): use lang::langs

	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
	initialize as such

	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
	the version
	of ChangeLog (which is updated at each upload)

	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
	for bad blocks" as advanced
	(setRootPassword): remove choosing non-md5 or non-shadow passwords.

	* install_any.pm (setPackages): use lang::langs instead of using
	$o->{langs} as a array ref (it is not so anymore)
	(spawnShell): print the drakx_version

2001/01/08  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm: fixes
	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)

	* interactive_gtk.pm: fixes
	(ask_from_treelistW): removed
	(create_ctree): created, used for ``type => treelist'' entries

	* my_gtk.pm: fixes

	* ChangeLog: New snapshot uploaded

2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
	Czech, Norwegian and Serbian files

2001/01/07  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: update code for new ask_from_entries_refH
	which doesn't handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered
	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
	ask_from_listf_, it enables the use of advanced

	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
	doesn't handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered

	* interactive.pm: update code for new ask_from_entries_refH which doesn't
	handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered
	(ask_from_listf_no_check): replaces ask_from_list_no_check
	(ask_from_entries_refH_powered): sorts the list if needed or wanted

	* partition_table_raw.pm (test_for_bad_drives): created
	- ugly stuff needed mainly for Western Digital IDE drives
	- try writing what we've just read, yells if it fails
	- testing on last sector of head #0 (unused in 99% cases)

	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
	non-existent
	file, stressing the ftp server :-/ )
	for the moment, just release cdrom.img, hd.img and hdreiser.img
	others should should come...

	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
	hdreiser.img
	others should should come...

	* interactive_gtk.pm (ask_from_listW): removed
	(create_list): calls "format" on list elems before prompting them
	(create_clist): created
	(ask_from_entries_refW): calls create_clist in case of list with no help

	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
	(installPackages): don't take into account the time when prompting the
	user

	* common.pm (may_apply): added

	* install_any.pm (getHds): test_for_bad_drives called on hard drives
	(getHds): ensure $o->{hds} is not set until the hard drives are checked

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* ChangeLog: New snapshot uploaded
	New snapshot uploaded

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* ChangeLog: New snapshot uploaded

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* standalone/rpmdrake: deprecated (and has been for a long time now)

	* network.pm, install_steps_interactive.pm, netconnect.pm,
	install_interactive.pm, standalone/adduserdrake, any.pm,
	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
	ask_from_entries_refH parameter format has changed so change all
	accesses to it.

2001/01/05  François Pons  <fpons@mandrakesoft.com>

	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
	DrakX
	removed need of packdrake binary

	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames

	* live_install2: cleanup to keep libperl.so but the right one

	* live_install: no more copy of files on live system, now use environment
	variable by DrakX cleanup

	* perl2fcalls: added packdrake call (via new but incomplete) and package

	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary

	* netconnect.pm: fixed syntax error

	* modules.pm: eval insmoding ide-cd (just in case)
	removed need of packdrake binary

2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
	and Japanese files

2001/01/05  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm: help cperl-mode

	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
	new ask_from's:
	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
	- ask_from_list now calls ask_from_entries_refH_powered
	still not done:
	- ask_from_treelist should use ask_from_entries_refH_powered,
	and lists with no help should use CList (List is bad)
	- keyboard and mouse binding is still rough
	- enhance the look

	* keyboard.pm: add the percentage of each keyboard types (as a comment for
	now)

2001/01/04  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: cleaned... everything should be buggy.

2001/01/04  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
	code cleanup and fixes for lilo not upgrade

2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* install_any.pm: fixed the functions doing the lists of languages

	* lang.pm: fixed the functions doing the lists of languages
	The list of languages now has complete locale names insted of just
	language
	code (that is needed to differentiate zh_CN and zh_TW among others)

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file

	* share/po/eu.po: updated Basque file
	updated Brazilian file

2001/01/04  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: some pixelization using the new if_

	* install_steps_interactive.pm (setRootPassword): fix pixelization
	keep $o->{langs} unpacked to simplify things
	if_ pixelization

	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
	(if_): created. Use it to replace things like
	($::expert ? $val : ()) by if_($::expert, $val)

	* keyboard.pm: nl keyboard is not used, so defaults to us_intl

	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
	unpacked to simplify things

	* netconnect.pm: quite a few clean-up (and buggying)

2001/01/03  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm: admin user removed before beeing added

	* netconnect.pm: corrected typo
	LAN is configured with default value if firewall

2001/01/03  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed invocation of change_type by clicking on legend
	unless expert

	* install2.pm: fixed usage with testing

	* install_steps.pm: fixed some other services to start in case something
	gets wrong,
	this fixes some deadlock on upgrade from 7.0.
	fixed usage with testing

	* partition_table.pm: fixed overlapping partitions between one extended
	and one regular primary.
	should be accepted (log printed instead of error) as diskdrake allow
	their
	creation in expert.

2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: add checks of dependencies on marfiles
	fix a couple of broken dependencies in modules.pm

2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format

2001/01/03  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the setting of PATH and spawnShell *after*
	setting $prefix

2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: added a few locales dependences

2000/12/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (addUser): typo fix

	* ChangeLog: New snapshot uploaded

	* ftp.pm (getFile): recall getFile after rewindGetFile

2000/12/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (addUser): typo fix

	* ftp.pm (getFile): recall getFile after rewindGetFile

2000/12/28  Pixel  <pixel@mandrakesoft.com>

	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
	jako

2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.

2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated Lithuanian file

2000/12/22  dam's  <damien@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm: corrected admin user
	setting for firewall install.

2000/12/22  François Pons  <fpons@mandrakesoft.com>

	* modules.pm: fixed load_multi on live.
	added back all removed module with the new great mdk-stage1 of gégé.

2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: make them work with kernel-2.4 by disabling non existent
	modules

2000/12/22  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage

2000/12/21  Pixel  <pixel@mandrakesoft.com>

	* ChangeLog: New snapshot uploaded

2000/12/21  dam's  <damien@mandrakesoft.com>

	* install2.pm: firewall : automatic class set when firewall (beginner=0)

	* install_steps_interactive.pm: if firewall, admin password obliged

	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)

	* any.pm: corrected module stuff.. Thanx to pixel

2000/12/20  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): unsure the device exists

	* unused/christmas-karaoke.patch: handle isa cards

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* ChangeLog: New snapshot uploaded
	New snapshot uploaded

2000/12/19  dam's  <damien@mandrakesoft.com>

	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
	standalone/pixmaps/draknet3.xpm: added control-center.

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss

	* unused/christmas-karaoke.patch: Happy Christmas :)

	* install_any.pm: spawnShell: set DISPLAY, just in case :)

	* install2.pm: set PATH before doing spawnShell

	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)

	* ChangeLog: New snapshot uploaded

2000/12/18  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: added embedded support for control-center
	corrected embedded support.
	new control center and related

	* netconnect.pm: corrected typo
	corrected typo

	* standalone/drakxservices, standalone/control-center, ChangeLog,
	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
	standalone/drakboot: new control center and related

	* install_gtk.pm: added firewall support

	* install2.pm: included firewall handling
	changed firewall comportement

	* install_steps_interactive.pm: changed firewall comportement

	* modules.pm: corrected bad mergeinconf

2000/12/18  Pixel  <pixel@mandrakesoft.com>

	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
	cfI/xfI
	remove isdndb.net

2000/12/19  dam's  <damien@mandrakesoft.com>

	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
	standalone/pixmaps/draknet3.xpm: added control-center.

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss

	* unused/christmas-karaoke.patch: Happy Christmas :)

	* install_any.pm: spawnShell: set DISPLAY, just in case :)

	* install2.pm: set PATH before doing spawnShell

	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)

2000/12/18  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: added embedded support for control-center
	corrected embedded support.
	new control center and related

	* netconnect.pm: corrected typo
	corrected typo

	* standalone/drakxservices, standalone/control-center, ChangeLog,
	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
	standalone/drakboot: new control center and related

	* install_gtk.pm: added firewall support

	* install2.pm: included firewall handling
	changed firewall comportement

	* install_steps_interactive.pm: changed firewall comportement

	* modules.pm: corrected bad mergeinconf

2000/12/18  Pixel  <pixel@mandrakesoft.com>

	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
	cfI/xfI
	remove isdndb.net

2000/12/16  Pixel  <pixel@mandrakesoft.com>

	* standalone/mousedrake, standalone/drakgw: use ldetect-lst

	* Makefile.drakxtools: fix daminetsex
	use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* share/list: use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* any.pm: fix daminetsex

	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)

	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
	detects mice types :)
	use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* Makefile.config: fix daminetsex
	use ldetect-lst

	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
	use ldetect-lst

	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
	share/Cards2CardsNames: pci_probing now done by libldetect
	config files moved in package ldetect-lst

2000/12/15  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst

	* install_steps.pm: clean all unneeded stuff

2000/12/14  dam's  <damien@mandrakesoft.com>

	* any_new.pm, netconnect_new.pm: preparing for big jump.

	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
	Everything should work, but you better test :)

	* standalone/control-center: big improvement and cosmetic changes
	a lot of improvement. Is able to launch multiples soft passing in
	arguments.
	new file. Its location should change soon.

	* any.pm: Big jump. The *_new.pm are replaced by *.pm
	Everything should work, but you better test :)
	corrected typo.

2000/12/14  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: obsoleted by rpmsrate

	* share/rpmsrate: obsoletes compssList

	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
	move from compssList to rpmsrate

	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)

2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: updated Italian file

2000/12/12  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: typo + if firewall, don't display 'disable network'

	* standalone/draknet2: new version... still working on it

	* ChangeLog: commit

	* share/themes-mdk-Firewall.rc: added firewall theme

	* modules.pm: my fault, corrected renaud's patch incorporation

	* share/logo-mandrake-Firewall.xpm: new logo

2000/12/12  François Pons  <fpons@mandrakesoft.com>

	* share/list: added packdrake.pm as packdrake has been splited.

	* pkgs.pm: fixed versionCompare to always return number. added checking of
	version to
	select obsoletes on upgrade.

2000/12/11  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: Radeon uses 3D now.

	* lang.pm: fixed write_langs for upgrade.
	i18n sucking fixes.

	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.

2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: Added configuration of Vietnamese input server

2000/12/09  Pixel  <pixel@mandrakesoft.com>

	* standalone/adduserdrake: remove debugging code

	* install2.pm (selectInstallClass): give $clicked to selectInstallClass

	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
	null in case of error
	on hidden entry cuz newt doesn't display null entries, disturbing

	* install_steps_interactive.pm (formatMountPartitions): the format
	partition dialog created at first use,
	so that it doesn't appear if no partitions are formatted.
	(selectInstallClass): ensure expert choice is kept if it was prechosen
	(selectInstallClass): if expert pre-chosen, ensure expert is kept

	* interactive_gtk.pm, install_steps.pm: small renicing

2000/12/08  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed bug in list of packages provided by another one.

2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
	share/po/az.po, share/po/tr.po: updated Brazilian file

2000/12/08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): warn if VERSION file doesn't exist
	(formatPartitions): call rotate_logs after mounting the partitions

	* mouse.pm (write_conf): fix to make make test_pms happy

	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug

	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
	/root

	* ftp.pm (new): retry in case of ftp connection/login

	* commands.pm: report_bug: created, returns a string

2000/12/07  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected ADSL connection choice.
	corrected typo

2000/12/06  dam's  <damien@mandrakesoft.com>

	* install2.pm: erare humanum es
	firewall begins to infect the install :).
	new meta_class.

	* share/logo-mandrake-Firewall.xpm: aded logo for firewall

	* install_gtk.pm: corrected errors
	left pixmap centered if firewall
	improved the firewall theme.
	errare humanum es
	firewall infects the install.
	The logo is changed if firewall.

2000/12/06  Pixel  <pixel@mandrakesoft.com>

	* standalone/keyboarddrake: add possibility to use keyboarddrake
	non-interactive (aka give the keyboard as
	first parameter)

	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
	Now rpm uses %_install_langs in /etc/rpm/macros

2000/12/05  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
	occurs.

	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.

2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
	share/po/es.po: updated several pofiles

2000/12/04  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: use isCdNotEjectable.

	* common.pm: added function isCdNotEjectable.

	* share/Cards+: SiS620 card are said to be unsupported by XF4.

	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
	memory).
	fixed compareVersion for deadlock. removed silly CODE print on deporder
	problems.

	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.

2000/12/03  dam's  <damien@mandrakesoft.com>

	* mouse.pm: incorporated cmodifications in the firewall branch

	* netconnect.pm: netconnect_new > netconnect.pm

	* netconnect_consts.pm: incorporated in the firewall branch.

	* standalone/draknet2: incoporated in the firewall branch

	* any_new.pm: any_new > any, so we remove it now.

	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
	incorporated in the firewall branch

	* modules.pm: incorporated modifications to the firewall branch. Hope they
	won't break anything...

2000/12/02  dam's  <damien@mandrakesoft.com>

	* share/po/az.po: correction in firewall incorporated

	* ChangeLog: first attempt ro build the firewall install

	* standalone/mousedrake: incorporated in the firewall branch

	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
	in the firewall branch

2000/11/28  dam's  <damien@mandrakesoft.com>

	* modules.pm: included reno's patches. Now should work without kudzu.
	branch to build the firewall install.

	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
	standalone/pixmaps/isdn.xpm: Initial revision
	branch to build the firewall install.

	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
	share/template.in/cdrom.kdelnk.in,
	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
	Makefile, share/consolefonts/lat0-sun16,
	share/themes/DarkMarble-check_off.png,
	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
	do_resize_fat, share/po/wa.po, share/po/is.po,
	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
	share/step-green-click.xpm, partition_table_sun.pm,
	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
	standalone/livedrake, share/diskdrake.rc,
	share/themes/DarkMarble-check_on.png, standalone/draknet,
	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
	share/step-green.xpm, share/rpm-base.xpm,
	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
	share/Cards2CardsNames, Newt/Makefile.PL,
	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
	standalone/icons/findf.xpm, share/po/lt.po,
	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
	resize_fat/.cvsignore, install_steps_interactive.pm,
	share/themes/mdk-button4.png, live_install, standalone/draknet2,
	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
	partition_table_mac.pm, standalone/mousedrake, devices.pm,
	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
	perl2etags, share/po/Changelog, standalone/drakboot,
	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
	standalone/printerdrake, services.pm, share/kmap2bkmap,
	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
	c/Makefile.PL, share/themes-mdk-Desktop.rc,
	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
	standalone/diskdrake, share/po/ko.po,
	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
	share/po/ja.po, any.pm, share/isdndb.net,
	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
	share/step-red-click.xpm, share/po/Makefile, help.pm,
	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
	standalone/adduserdrake, share/themes/marble3d-button2.png,
	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
	bootloader.pm, share/po/af.po: branch to build the firewall install.

2000/11/28  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: change upgrade section for keyboard.

	* install_steps_gtk.pm: extended chooseSizeToInstall.

	* install_steps.pm: updated comment.

	* pkgs.pm: fixed misuse of map with values returing list which are indexed
	afterward.

	* install_any.pm: removed some more logs.

	* keyboard.pm: keep track of unknown keyboard (for upgrade)

	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
	acceleration level) and upgrade use this level
	for newbies so.
	make sure a recommended upgrade get the minimum and a little more (80).
	choose default size according to a default mark (currently 49).

2000/11/27  dam's  <damien@mandrakesoft.com>

	* netconnect_consts.pm: added isdn Gazel card 10b5 1151

2000/11/27  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (@bad_types): list of the different type of extended
	partitions
	(important_types): remove @bad_types from important_types

2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ru.po: updated Russian file

2000/11/24  dam's  <damien@mandrakesoft.com>

	* mouse.pm: doc + split

	* netconnect_new.pm: added depmod after having writed modules.conf

	* standalone/mousedrake: splited

2000/11/24  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: avoid .la files for selection.

	* install_steps.pm: added missing portmap.

2000/11/23  dam's  <damien@mandrakesoft.com>

	* standalone/draknet2: progressbar.

2000/11/23  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
	structural change of pkgs.

	* install_any.pm: removed some ugly logs.
	updated with structural change of pkgs.

	* install_steps.pm: added tempory fix for initscripts %post.
	updated with structural change of pkgs.

	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
	removed ugly log on transaction.
	added special case to avoid counting kernels space when upgrading
	as these package are not upgraded (just installed).
	Memory usage optimization, change structure of storing
	package informations. lot of fork to make sure of
	freeing memory by perl (no free on used hashes or arrays
	usable by other than perl), now upgrade takes as much as
	install which takes at least 0.5Mb less than before.

2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: put all tina stuff to weight 0

2000/11/21  François Pons  <fpons@mandrakesoft.com>

	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
	keep
	wacom entries.

	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
	depth wanted.

	* install_steps.pm: always try to get default from /etc/X11/XF86Config
	removing logs.

	* pkgs.pm: cosmetic changes for upgrade, removing some logs.

	* install_steps_interactive.pm: removed code to ask if take care of
	/etc/X11/XF86Config* files.
	added wait message during rebuild of rpm database as it takes some time.

	* Xconfigurator_new.pm: WARNING

2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: updated Azeri file

2000/11/20  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: clean up as today filelist is no more.
	use parsehdlist from rpmtools-2.1-3mdk or above instead of
	perl code from DrakX forking to simulate a filelist server.
	this increase performance by 100 to 150% on selection of
	packages to upgrade.

	* share/list: added parsehdlist.

	* c/stuff.xs.pm: removed logs.

2000/11/20  Pixel  <pixel@mandrakesoft.com>

	* share/Cards+: add radeon

	* install_steps_auto_install.pm (exitInstall): fix message

	* install_steps.pm (afterInstallPackages): moved the
	writeandclean_ldsoconf here

	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points

2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: add openuniverse to the list of gl apps

2000/11/16  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: corrected isdn_get_{list, info}

2000/11/16  François Pons  <fpons@mandrakesoft.com>

	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)

	* modules.pm: tempory version for current glibc, a lot of module have been
	removed due to
	problem of stage1 increase in size when compiled with glibc-2.2 and
	current
	modutils.

	* c/Makefile.PL: updated with rpmlib 4.

	* c/stuff.xs.pm: completed something that seems to work almost correctly
	at the first look
	with rpmlib 4.

2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: add netscape-german, thx to florin
	isdn4k-utils gets same weight as isdn4net, thx to Florin

2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

	* share/po/sk.po: updated Slovak file

2000/11/15  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: added isdn_get_list and isdn_get_info
	calls modules::write_conf to fill the modules.conf.

	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
	at all for now.

	* modules.pm: when loading a new module, add an alias for it, even in
	standalone mode.

2000/11/15  François Pons  <fpons@mandrakesoft.com>

	* c/stuff.xs.pm: updated for rpm 4.

	* pkgs.pm: rpmdepOrder again (for new TAGp)

2000/11/15  Pixel  <pixel@mandrakesoft.com>

	* c/Makefile.PL: add librpmio

	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
	(dev_t)

2000/11/14  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: better structure for the ethx-driver.
	added call to add_alias and write_conf

	* standalone/draknet2: updated

2000/11/14  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: removed foreach (<... which are eating memory
	fork install on upgrade for searching trhough filelist, this saves
	about 20Mb of memory before rpmlib transaction are started so its is
	more than 2 times faster for upgrading a system, sorry it was
	effectively
	a machine two overloaded that makes the upgrade slower.
	make rpmlib not to check size as DrakX should do it.
	added special cases for selection of packages according to files, avoid
	all kde-i18n packages if their locales-$lang is not selected, avoid
	a -devel package if only one files is updated (typical for fixes on
	package by moving files around).
	
	deactivated rpmdepOrder as it should be done directly in
	depslist.ordered
	file.
	
	fixed obsoletes which never run correctly, even if almost no package are
	selected explicitely this way.
	
	added log during selection of packages to upgrade to keep a track of
	what DrakX is doing.

	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
	memory

2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: Integrate Till's patches for better work with Cups.

2000/11/12  Pixel  <pixel@mandrakesoft.com>

	* standalone/mousedrake: fix for bug #1350
	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)

	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
	.cz22 for
	.cz2) that makes for than one CD install breaks :-(

2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

2000/11/10  dam's  <damien@mandrakesoft.com>

	* standalone/draknet2: draknet2 : new version of draknet, post-install
	only, uses only libDrakX backend, beautyfull

	* netconnect_new.pm: completed adsl_conf_backend
	corrected conf_network_card_backend : return interface and module
	separately
	splitted pppconfig.

2000/11/10  François Pons  <fpons@mandrakesoft.com>

	* share/po/fr.po: typo fixing

	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
	updated typo for remote CUPS server configuration dialog

2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files

	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files

2000/11/10  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
	section)

2000/11/09  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: added handling for 2 ethernet cards with the same module

2000/11/09  François Pons  <fpons@mandrakesoft.com>

	* share/po/fr.po: add some missing translation (mainly printer for CUPS
	remote config)

	* printer.pm: make sure to restart cups when cupsd.conf is modified.

	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.

2000/11/08  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: updated

2000/11/08  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: make sure class discarding do not destroy result

	* pkgs.pm: added new function for selected or installed accessor on pkg
	make sure package already installed for oem are marked as selected, as
	some
	code refer to this state to perform some actions (install_urpmi)

	* install_steps.pm: fixed for urpmi again;

	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
	/etc/cups/cupsd.conf

	* printer.pm: add minimal management of /etc/cups/cupsd.conf

2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)

2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/es.po: updated Spanish file

2000/11/07  dam's  <damien@mandrakesoft.com>

	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
	internal modem configuration that uses ttyS* > 3

	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
	some doc

2000/11/07  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).

	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
	listing medium used for boot

	* install_any.pm: use of $boot_medium where the boot medium is used
	(default 1)

2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
	<sileryti@mail.com>

2000/11/07  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): in oem, configureX automatic
	(main): $::oem is now global :-(  (needed in install_steps.pm)

	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
	install_urpmi in case of $::oem

2000/11/06  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: backend/frontend fork complete

	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
	function is passed by argument

	* network.pm: configureNetwork2 commented.

2000/11/06  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: created function for examining already installed package on
	install (oem).

	* install2.pm: add a flag to allow by default formating /

	* install_steps.pm: conditionnal format of / and use already installed
	packages if any on install.

2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
	<ajulius@yahoo.com>

2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
	ascii transliteration for them

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds

2000/11/06  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (formatPartitions): formatMountPartitions done even in
	upgrade
	(main): set $o->{partitioning}{use_existing_root} in oem

	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
	plain dumb
	(doPartitionDisksAfter): fs::mount_all moved here
	(doPartitionDisks): use $o->{partitioning}{use_existing_root}

	* install_any.pm (use_root_part): fs::mount_all really removed
	(use_root_part): fs::mount_all removed

	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
	already mounted partitions
	(installCrypto): nicer layout

2000/11/05  dam's  <damien@mandrakesoft.com>

	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'

2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
	<yves@maniette.com>

2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eo.po: updated Esperanto file

2000/10/31  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
	nearly finished

	* any_new.pm: added this file to fork frontends and backends in any.pm

2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
	tu damsera

2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po: updated Walloon file

	* share/keyboards.tar.bz2: updated keyboards

2000/10/30  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails

2000/10/28  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: new version of draknet. Splited frontends - backends

2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

2000/10/27  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: remove the noising rpm output command line when loging
	installed rpm
	size (only usefull for live_update and just for conveniance).

	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
	hack)
	before reading a compssUsers file.

	* live_install: add VERSION in list of file that have to be symlinked.

	* common.pm: list_skels returns list of existing directory and writeable.

	* live_install2: Make sure to remove font path in /tmp/drakx before
	exiting.

2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
	Turkish files

2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: fortune-mod gets 10/0/10 on request from egil

2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pl.po: updated Polish file

2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po: updated Catalan file

2000/10/23  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
	to please jl :)

	* detect_devices.pm (floppies, probeall): add require "modules" as it
	should be

	* install_interactive.pm (partitionWizardSolutions): add "require
	resize_fat::main" as it should be

2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
	74/0/74

2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
	and Ukrainian files

2000/10/20  fabman

	* share/po/es.po: updated

2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: ntp to -1/-1/-1

2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: put all packages requiring kde1-compat to 0 except
	kisdn-free
	aumix now gets a high weight (79) because it's required to save the
	mixer
	settings at shutdown

2000/10/19  Pixel  <pixel@mandrakesoft.com>

	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)

2000/10/19  tlb

	* share/po/da.po: 100%, Troels Liebe Bentsen.

2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: Added AZeri file

	* share/po/no.po: updated Norwegian file

2000/10/17  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
	code in ineractive_gtk
	added some isdn card in pcitable
	corrected typos, and made ISA isdn work

2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/lv.po: updated Latvian file

2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
	setting

2000/10/16  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners

	* share/compssList: sympa is -1 except for server

	* keyboard.pm (write): small pixelization (neater now)

	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install

2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, keyboard.pm: small fix for Swedish locale

	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
	share/po/wa.po, share/po/de.po: updated Bulgarian file

2000/10/13  François Pons  <fpons@mandrakesoft.com>

	* partition_table_empty.pm: empty partition table as assumed only if the
	MBR is really composed of only null chars.

2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: added viavoicemenu

2000/10/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (ask_mntpoint_s): dqs

2000/10/11  Pixel  <pixel@mandrakesoft.com>

	* .cvsignore: ignore flog files

	* install2.pm (main): test

	* ChangeLog: qsdqsd

	* install_steps_interactive.pm: * (selectKeyboard): set default
	$o->{langs} to $o->{lang}

2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
	install all the needed rpm's

2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po, share/po/es.po: updated Norwegian file

	* share/po/pl.po: updated Polish file

	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file

2000/10/10  tlb

	* share/po/da.po: 99%.

2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: make only one call to urpmi in order
	to install all the needed rpm's

2000-10-10  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: increase $::VERSION

2000-10-09  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: update after Dam's new messages in netconnect

2000-10-09  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): remove the handling of
	doc desktop icons. see dadou

2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers: new list (with icons)

	* share/list: add icons for compssUsers

2000-10-09  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: added wait message

2000-10-09  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* share/themes-*.rc: change the fg[INSENSITIVE] entry

2000-10-09  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: added tuxracer in OpenGL games to install if an
	accelerated card has been found.

2000-10-09  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): asking connection after writing start/stop scripts.
	(adsl_conf): if during install, don't use chkconfig, make the
	links directly for the adsl init script.

2000-10-09  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
	now true by default. So put false if security >= 3 instead of
	removing it.

2000-10-09  François Pons  <fpons@mandrakesoft.com>

	* any.pm: default speed of modem set to 115200.

	* fs.pm: fixed format of RAID partition.

	* install_interactive.pm: take into account RAID partitions for
	searching / partition.

2000-10-09  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
	(selectLanguage): don't set $o->{langs} (so that you can go back
	and it works)

	* common.pm (round_up, round_down): ensure number is an integer

	* install_steps_interactive.pm (chooseGroups): take into account
	the min_level to compute the size

2000-10-08  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): move the
	computing of max_size before calling chooseGroups (not the one for
	desktop meta_class)
	(chooseGroups): compute the size of Miscellaneous

2000-10-07  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-07  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: don't install locales-* even in 'all' install
	(those files are usefull if RPM_INSTALL_LANG doesn't include that
	lang)	

2000-10-07  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-07  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (install): log the gonna be installed packages (-> be
	able to track not installed packages that should have been
	installed)	

2000-10-06  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
	(intro): connection detection improved : now use "ifconfig | grep interface"
	(pppConfig): corrected cnx_up/down

2000-10-06  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-06  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): don't fail if
	kdeglobals file is not there	

	* share/compssUsers.desktop: fix icons

	* detect_devices.pm (cdroms): fix for scsi cdrom drives

	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
	(dixit jeff)

	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
	moment	

2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>

	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices

2000-10-06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (ask_connect_now): connection is now tested.

2000-10-06  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_gtk.pm: updated
	license.

	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
	drakres and no wm available, moved Riva128 card from experimental
	to stable, fixed presentations of text.

	* pci_probing/pcitable: fixed Cirrus Logic sound card.

2000-10-06  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-06  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: fixed bad call to hasUsb...

	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
	530, 620 and 6326 with XFree 4.0.1.

2000-10-06  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-06  Pixel  <pixel@mandrakesoft.com>

	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	

	* install_steps.pm (afterInstallPackages): put the Charset in
	kdeglobals, otherwise kde uses charset iso8859-1 :(

	* lang.pm (charset): created

	* common.pm (update_userkderc): fix it, change the argument
	passing	

2000-10-05  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: raise kde-i18n-*, should be installed whenever
	kdebase is installed

	* pci_probing/pcitable: integrate patch from viet (concerns
	sym53c8xx cards)

	* share/compssUsers: use "documentation" as the database icon

	* install_steps_interactive.pm (chooseGroups): fix to accept icons
	not in the format "*_section.xpm"

	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	

2000-10-05  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (adsl_conf): updated pppoe conf.
	(main): added $netc->{minus_one} to avoid to count dhcp configured
	eth when asking to share the connection.
	(adsl-pppoe): improvement. Should work now.
	(miscellaneous): corrected chmod 755 to 744 for connections scripts

	* netconnect.pm (main): network is stopped then started, instead
	of restarted.

2000-10-05  François Pons  <fpons@mandrakesoft.com>

	* live_install: added icons (this fixes the yellow on white
	tooltips problem).

	* install_any.pm: added ghostscript-utils in the list of packages
	to copy when changing CD.

	* printerdrake.pm: install ghostscript-utils if a lexmark printer
	is selected on cups.

2000-10-05  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-05  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
	/Mandrake/base	

2000-10-05  François Pons  <fpons@mandrakesoft.com>

	* netconnect.pm: fixed syntax error.

	* share/po/i18n_compssUsers: simplified version and fixed
	dependancies to pkgs.pm (for building drakxtools).

2000-10-04  François Pons  <fpons@mandrakesoft.com>

	* install_gtk.pm: removed 80 pixel on height for live upgrade.

	* install_steps.pm: do not set keyboard when live upgrade after
	setting the language.

	* install_steps_gtk.pm: fixed the trying to start a X server on
	live.

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
	build DrakX to use i18n_compssUsers

	* install_steps_interactive.pm (selectLanguage): update license

	* install_steps_gtk.pm (installPackages): add second license for
	shitty soft (commercial one)

2000-10-04  dam's  <damien@mandrakesoft.com>

	* draknet (netconnect.pm and network.pm): various translations
	corrected, network is restarted, buttons connect/disconnect
	debugged. 

2000-10-04  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (main): kill prefdm instead of autologin

	* install_any.pm (find_root_parts): don't use
	suggest_mount_points, it couldn't do what we wanted	
	(guess_mount_point): created, contains the common stuff between
	suggest_mount_points and find_root_parts

2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: fix some failing/untranslated i18n messages

	* share/po/fr.po: write translations according to drakgw
	
2000-10-04  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: removed bad card for 3D Rage Pro.

	* install_any.pm: removed Aurora for SiS card, add more case for
	detecting right cdrom for live upgrade, fixed wrong list of
	packages for laptops.

	* c/stuff.xs.pm: added time interval of 200ms between update of
	progression bar of install, make sure the last step is seen.

2000-10-04  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (when_load): stricter regexp for $type is scsi or not
	(so that scsi_mod with is scsi_raw doesn't get an alias
	scsi_hostadapter)	

	* detect_devices.pm (isLS120Drive): extend the regexp to include
	"Caleb Technology - 144MB FDD UHD Floppy"

	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
	works!	
	* c/stuff.xs.pm (isBurner): created

	* modules.pm (load_ide): make sure ide-cd is loaded!

	* install_steps_interactive.pm (chooseGroups): the label and help
	are now translated (at least will be), so use the translations

2000-10-03  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile (DrakX.pot): added the to-be-translated from
	compssUsers
	* share/po/i18n_compssUsers: read the compssUsers's and output the
	to-be-translated in po format

	* log.pm (l): log to STDERR instead of STDOUT

	* install_any.pm (loadO): use first floppy drive available (won't
	help much though, as stage1 doesn't follow this...)

2000-10-03  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-03  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (autologin): don't propose autologin in
	security > 3

	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
	returns 127

	* bootloader.pm (suggest): don't use grub if more than 800MB

2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/validate.pl: create this tool
	
	* share/po/fr.po: fix many typos

	* share/po/fr.po: make compssUsers translation

2000-10-03  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator_consts.pm: changed resolution allocation.

	* fs.pm: removed no more used log.

	* install2.pm: add exit button if live upgrade.

	* install_any.pm: increased minimal available size to 65Mb.

	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
	for mode.

	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.

	* share/Cards+: fixed Savage2000 entry.

2000-10-03  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-03  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: updated bad card with Rage Mobility card.

	* live_install: added test of root user, abort if not root.

2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fixed bug #518 and fixed other misc errors

2000-10-03  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-10-02  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm (Resize): fix to make ext2resizing work a little
	better	

	* install_steps.pm: fixed installation of urpmi configuration.

	* detect_devices.pm: updated comment about UltraDMA66/100
	management.

	* modules.pm: updated comment about UltraDMA66/100 management.

	* diskdrake.pm: adding a cylinder for the minimum of the resize
	and if there is nothing to do for resize, simply return.

	* install_any.pm: added missing require pkgs.

2000-10-02  Pixel  <pixel@mandrakesoft.com>

	* many files: remove many lnx4win special cases which are not
	needed anymore        
	
	* any.pm (addUsers): grpuser output goes to Mr Dave

	* bootloader.pm (install_lilo): change the default color of menu

	* install_steps_interactive.pm (choosePackages): add 300MB choice
	in desktop

	* mouse.pm (fullnames): fix i18n fix

	* install_steps.pm (miscellaneous): don't add ide2=0x... for
	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
	
	* Xconfigurator.pm (main): add handling of icewm logout

	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"

2000-10-02  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): infos are written only when needed.
	* netconnect.pm (intro): connection checking now works.
	
2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
	jeff request.

2000-09-30  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-30  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
	brok^H^H^H^Hfrozen.

2000-09-29  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-29  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (adsl_conf): dhcp should better work.

	* network.pm (configureNetwork): remove connection script if a
	gateway is given.

	* common.pm (setVarsInShMode): created. chmod the file with
	permissions passed in argument.

2000-09-29  François Pons  <fpons@mandrakesoft.com>

	* modules.pm (load): fixed when standalone, use modprobe.

	* pkgs.pm: added preference for wu-ftpd.

	* detect_devices.pm: added code to proble USB printer.

	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
	USB printer.

	* install_steps.pm: removed possibilty to add an user in urpmi
	group (jloup).

	* install_steps_interactive.pm: log if CD not ejectable.

2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: sync with latest packages

	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
	  MandrakeSoft physical address 

2000-09-29  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-29  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (intro): detection of internet
	configuration/connexion state.
	
	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): add read_already_loaded cuz of
	pcmcia	

2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50

2000-09-28  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): the minimum is 25
	in beginner, not 10

	* pkgs.pm (readCompssUsers): fix reading description

	* install_steps.pm (afterInstallPackages): remove the code to
	handle RPM-GPG-KEYS

2000-09-28  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
	parsing, no more draknet.rc

	* netconnect.pm (read_net_conf): no adsl tree anymore.

	* netconnect.pm: drakgw called if enough card are installed.

	* netconnect.pm: minor bugs correction.

2000-09-28  François Pons  <fpons@mandrakesoft.com>

	* Makefile.config: added livedrake for drakxtools.
	* diskdrake.pm: use corrected partition size when resizing a dos
	partition (like the others).
	* install_any.pm: no more pnm2ppa packages and others in package
	to copy when changing CD.
	* live_install: exec live_install2 instead.
	* live_install2: contains post live upgrade stuff now.
	* printerdrake.pm: protect set_help() usage by if $::isInstall,
	removed reference to package pnm2ppa and others.
	* standalone/livedrake: initial release for drakxtools.

2000-09-28  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm (partitionWizardSolutions): fix the limit
	cases for lnx4win	

	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): set $size2install
	to $availableC in desktop install, as it should be

	* install2.pm (choosePackages): remove the code for removing kdesu
	in high security...

	* install_steps_interactive.pm (createBootdisk): format more
	nicely the text

	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
	better estimation

	* install_steps_interactive.pm (chooseGroups): now returns a boolean
	(choosePackages): use chooseGroups return value to redo
	choosePackages	

	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
	don't test!

	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom

	* various: replace all Rescue by Update

	* pkgs.pm (readCompssUsers): read description for groups
	
	* install_steps_interactive.pm (chooseGroups): add description for
	groups	

2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers.desktop: added description

	* share/compssUsers: added description

	* share/compssUsers.desktop: added icon support, reordered,
	  renamed

	* share/compssUsers: reordered, renamed

2000-09-27  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectLanguage): intregrate
	license again

	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class

	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
	(as should be)

	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
	install classes) contains only one element, call
	install_steps_interactive::selectInstallClass1	

	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
	"no partitions selected to format"

	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	

2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: more for gnupg, -11 for sucking things,
          changed compss-groups to be less than 70.

	* share/compssUsers: modified compssUsers with Warly, added
          compssUsers.desktop, simplified for KD (now uses Graphical
	  Desktop/KDE instead of listing all relevant packages)

2000-09-27  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
	Created. adsl provider tree. 
	(set_net_conf): better informations storing.

	* my_gtk.pm (new): windows are always centered if standalone.

2000-09-27  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
	NeoMagic cards.
	* install_gtk.pm: re-enabled themes on live upgrade but without
	modifying background image.
	* install_steps_gtk.pm: fixed missing help.
	* live_install: lot of fixes to enable DrakX font, keep upgraded
	system clean (libperl.so which allows graphical login).
	* pkgs.pm: added function allowedToUpgrade to filter kernel
	package.

2000-09-27  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (configureX): if `clicked' don't go
	to auto mode

	* Xconfigurator.pm (monitorConfiguration): fix the translated
	'Generic' which is not so (and must not be so) anymore

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: remove all Unskip code

	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
	expert

	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
	legal resolution

	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
	on the license

2000-09-26  François Pons  <fpons@mandrakesoft.com>

	* fs.pm: added mounting of swap partition when mounting them
	all (this can help :-) 
	* pkgs.pm: fixed correction size code to make (really) a true
	bijection between corrected and rpm size.

2000-09-26  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectLanguage): integrate the
	license (temporary one)

	* modules.pm (write_conf): fix the /etc/modules generation

	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
	in icon format, use scrollbar. In non-icon format, use scrollbar
	for more than 11 entries.

	* commands.pm (bug): add ddcxinfos

	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	

2000-09-26  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
	modified identification for checking acceleration.
	* install_any.pm: added automatic installation (up 60) for
	OpenGL games if a graphic card MAY BE accelerated.
	* live_install: fixed perl idioms in pure shell script and added
	packdrake symlink if not already installed.
	* share/compssList: changed level to -1 for all needing 3D hw
	acceleration packages.

2000-09-26  dam's  <damien@mandrakesoft.com>

	* network.pm (write_resolv_conf): write temp dns line to be used
	with new initscripts package. Use to set dns live.

2000-09-26  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
	old FULLNAME format)

2000-09-25  Pixel  <pixel@mandrakesoft.com>

	* share/MonitorsDB: merge with latest redhat MonitorsDB

	* pci_probing/pcitable: major merge with latest redhat pcitable

	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
	"Rage 128", added "Rage 128 Mobility"

	* install_any.pm (getAvailableSpace): keep 10% of free space on
	big partitions

	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
	(otherwise, only a part is translated, see MonitorsDB for the
	non-translated part)

	* interactive.pm (ask_many_from_list): fix sorting

	* install_gtk.pm (test_mouse): smaller box to fit in 640x480

	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
	RPM-GPG-KEYS is copied before installing packages

	* pkgs.pm (readCompssUsers): handle icons in compssUsers

	* common.pm (truncate_list): ensure the list is not too big

	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
	20 elements if it is too big (use truncate_list)

2000-09-25  François Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: add Video mode for entry.
	* fs.pm: updated for live upgrade.
	* install2.pm: dropped unuseful steps filtering.
	* install_any.pm: fixed wrong Device3Dfx package name and clean
	postinstall rpms directory on upgrade before filling it.
	* install_gtk.pm: removed window restrictions of live upgrade.
	* install_steps.pm: fixed initrd symlink following in case of
	upgrade.
	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
	upgrade on live upgrade.
	* modules.pm: may fixed pcmcia lost driver (typically on network).
	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
	script :-)
	* printer.pm: back to "Generic PostScript" for default printer (jloup).
	* printerdrake.pm: make sure an expert can choose among available
	devices.

2000-09-25  dam's  <damien@mandrakesoft.com>

	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
	/etc/resolv.conf if needed.

	* netconnect.pm : adsl connection does'nt need any dns anymore.

	* netconnect.pm (read_net_conf): created. draknet now stores and
	reload the config.
	
	* netconnect.pm (main): if the user is french and uses french
	keyboard, don't ask his country.

2000-09-25  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: added 8139too

	* share/Cards+: GeForce2 DDR is handled by driver "nv"

	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
	kdm/xdm/gdm/autologin :)

2000-09-25  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-25  dam's  <damien@mandrakesoft.com>

	* network.pm (configureNetwork): Warn user if he already
	configured the interface.

2000-09-24  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (mergein_conf): created. call read_conf, fills
	%modules::conf and set $modules::scsi

2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit

2000-09-24  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-24  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (bug): use first floppy drive instead of fd0 hard
	coded (nice for LS120's)

	* install_steps_gtk.pm (selectMouse): if device changed, do the
	test	
	* standalone/mousedrake: fix for serial mice
	* install_steps_interactive.pm (selectMouse): fix for serial mice

2000-09-23  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (conf_network_card): now displays the modules of
	detected ethernet cards.

2000-09-22  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): calls drakegw.
	* netconnect.pm (get_net_device): fixed

2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw:
	  - added logs
	  - added verbose mode
          - fixed wrong stopping of named in other languages than english

	* netconnect.pm (get_net_device): try to fix it..

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard,
	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
	(): 

	* interactive.pm (ask_many_from_list): now only ask_many_from_list
	exists, obsoleting ask_many_from_list_ref and
	ask_many_from_list_with_help. More flexible and nicer
	* interactive_newt.pm (ask_many_from_listW): adapted to new
	calling type
	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
	type, handle 'shadow' and 'icon2f'

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}

	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
	i810	
	(testFinalConfig): i810 is a verybad_card, aka can't test anything
	on it :-(
	(main): fork to background and stay there while waiting for the WM
	to exit
	(testFinalConfig): update the backgroung image path

	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
	mousecursor is not restored)

	* run_program.pm (rooted): don't redirect the stdout and stderr to
	ddebug.log if not $::isInstall

	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone

	* modules.pm (load_raw): redirect stderr to tty5

	* install2.pm (main): set variable $::isInstall

2000-09-22  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: now includes information from netconnect to
	ignore the interface used for Internet connection

2000-09-22  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.

	* netconnect.pm (get_net_device): added get_net_device to know
	which interface has been used to configure the internet connection.
	(conf_network_card): ask to restart network if dhcp too.
	(main): enable dialing when modem.

	* network.pm (configureNetworkIntf): changed label to warn people
	about already configured eth cards.

2000-09-22  François Pons  <fpons@mandrakesoft.com>

	* install_gtk.pm: added Desktop themes.
	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
	initial release.
	* install2.pm: moved back to all steps for live upgrade.
	* install_gtk.pm: select right logo if desktop.
	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
	upgrade for a live upgrade.

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: add some call to log_sizes to log the
	installed size

	* install_steps_gtk.pm (installPackages): beep before changeMedium		

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf): try to call the f translation
	function on the default value with the index

	* install_steps.pm (afterInstallPackages): make the gpg code work,
	changed the call to 
	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"

	* detect_devices.pm: cleanup and removed unused code

2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* detect_devices.pm (getNet()): really remove plip in standalone

2000-09-21  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, netconnect.pm: changed NETWORKING reference
	from false to no.
	* printer.pm: changed timeout from 30 to 60.
	* printerdrake.pm: added wait message when waiting for cups to
	start.
	* pci_probing/pcitable: added erwan VIA Rhine board.
	* network.pm: added DHCP_HOSTNAME reference.

2000-09-21  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* standalone/keyboarddrake: fix for XF4

	* Xconfigurator.pm (write_XF86Config): comment the omit
	xfree86-dga	

	* install_steps.pm (afterInstallPackages): configure GPG public
	keyring with mandrake key	

	* standalone/mousedrake: updated/fixed for new mouse handling	

	* install2.pm (main): update for handling oem installs

	* many files: relGetFile cleanup, updated calls to getFile and
	getAndSaveFile accordingly

	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg

	* detect_devices.pm (@netdevices): plip removed in standalone,
	otherwise plip is always there (because of kmod)

	* install_steps_interactive.pm (choosePartitionsToFormat): replace
	the die "cancel" by die "already displayed", so that no error is
	displayed.

	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
	cards DELTA8139 and ADDTRON8139 (for jeff)

	* Xconfigurator.pm (show_info): also show the colordepth and
	resolution. don't show server if none, show XF4 driver if there's
	one.	
	(main): change the "Forget the changes" to "Keep the changes?"
	with displaying the current configuration.

2000-09-21  François Pons  <fpons@mandrakesoft.com>

	* printer.pm: changed "PostScript" ppd default description to "Raw
	queue (no filtering)", asked by Till.
	* Xconfigurator.pm: add log of what user select for 3D hw
	acceleration.
	* share/compssList: changed XFree86-glide-module to -2 because the
	level is the same for XFree86-Glide* which may have multiple
	different version installed due to dependancies of the first one.

2000-09-21  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
	should now work.

2000-09-21  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (exitInstall): call $o->exit if
	"Some steps are not completed"

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (install_loadlin_config_sys,
	install_loadlin_desktop): extracted from install_loadlin, do not
	call them anymore (remove it?)
	(suggest): put grub in lnx4win install

	* common.pm (availableRamMB): fixed (round to a multiple of 4)	

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
	read file in /usr/share and $prefix/usr/share 
	(isdn_write_config): corrected file to be sh compliant.
	(isdn_write_config): added default route settings for isdn.

2000-09-20  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace es1371 by snd-card-ens1371

2000-09-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 

2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 

	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 

2000-09-20  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: used new package install function.

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
	floppy or not based on its size (for scsi floppy)

	* Xconfigurator.pm (testFinalConfig): check if "server" OR
	"driver" field is set (otherwise XF4 only card won't pass)

	* bootloader.pm (suggest): fix for ``installing the last cooker
	from kenobi:/I on an smp machine i don't get anymore an entry for
	linux-up'' (c chmouel)

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])

2000-09-20  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
	should be detected)

	* lang.pm (get_langs): created, gives rpm install langs
	* install_any.pm (setPackages): give langs::get_langs() to
	readCompssList	
	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
	$langs instead. This fixes the RPM_INSTALL_LANG=all install.

2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* netconnect.pm: make dhcp-client, pump and such not translatable.
	Those are program names and should therefore not be translated,
	that only confuses translators

2000-09-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): corrected @users definition and
	passwd cat.

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* many files: changed some access to get_root to get_root_	
	
	* install_steps_interactive.pm (choosePackages): added code for
	desktop meta_class install type

	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
	emulate3buttons to setMouseLive
	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons

2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>

	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
	added `enter_console' and `leave_console'

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
	META_CLASS

	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
	result (not enough VideoRam), also remove the found resolutions
	* Xconfigurator.pm (main): remove the automatic searching of
	resolutions	
	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
	automatic searching of resolutions.

	* mouse.pm (fullnames): changed the `_' in `[' before Other
	(nicer, uh?)

	* install2.pm (selectMouse): changed clicked to !first_time

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-18  Dam's  <damien@mandrakesoft.com>

	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
	now in separated function.
	
2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
	if called via "Test again"
	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
	are bounded

	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
	classic and no-fb

	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
	must not be mount points. Also check that /home, /tmp and /usr are
	on trueFS

	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
	case of type "range". die if min > max.

2000-09-18  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
	partition/device display

	* partition_table_raw.pm (zero_MBR): add on the fly require of the
	good partition_table_$type

	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
	assignment to ide burners

	* install_steps.pm (afterInstallPackages): comment out a part of
	the icons mess messing

	* Xconfigurator.pm (cardConfiguration): move Unlisted to
	Other/Unlisted
	* share/CardsNames: updated (for Voodoo5)

	* install_steps_gtk.pm (selectMouse): fix the test to know wether
	the guy has changed the mouse type (to know wether to test the
	mouse or not)

	* install_steps_interactive.pm (selectLanguage): add the license
	
	* install_steps_interactive.pm (choosePackages): have the
	"Recommended" size be the default 
	(in the choice Minimum/Recommanded/Complete)
	
	* diskdrake.pm (Type): fix a typo

	* install_steps.pm (doPartitionDisksAfter): mark partition as
	mounted	

2000-09-17  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-17  Pixel  <pixel@mandrakesoft.com>

	* install/pcmcia_config.patch: cleaned
	
	* diskdrake.pm (Create, Type): have type field not_editable

	* tools/make_mdkinst_stage2: use TMPDIR if available

2000-09-16  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): move
	the setting of toFormat before asking for bad blocks, seems to fix
	things?? weird :-/

	* network.pm (miscellaneousNetwork): fix the setting of focus on
	error (tx2Thomas Poindessous :)	

	* install_steps_interactive.pm (configurePrinter): changed
	"Cancel" to "None" (for Thomas Poindessous :)

	* printer.pm (poll_ppd_base): max polling time raised from 10s to
	30s (for Till)	

	* install_steps.pm (ask_mntpoint_s): don't force partition type to
	be ext2 (at least if it's a known fs) (for Warly)

2000-09-15  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (set_help): save the help message displayed
	in $o->{current_help}
	* install_gtk.pm (create_big_help): display $o->{current_help}

	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
	* install2.pm (selectMouse): adapted for mouse::read now returning
	an hash ref

	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
	one function (now takes the device in the parameter)

	* interactive.pm (ask_from_treelistf): added (just like
	ask_from_listf, but with a tree)

	* Xconfigurator.pm: the reference is now nbuttons to
	know wether to put Emulate3Buttons or ZAxisMapping.
	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
	Banshee too.

	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
	ZAxisMapping.

	* common.pm (availableRamMB): replace availableRam, now use the
	size of /proc/kcore (what else to find the real ramsize?)

	* common.pm (cat__): created

	* install2.pm (main): add field meta_class in $o. Can be
	'desktop', in case option desktop is given, or if /desktop/i is
	found in /VERSION

	* install_steps.pm (miscellaneous): for lnx4win, always have
	'mem=' (so that the initrd is visible by both windows

	* install2.pm (main): add option "desktop"

	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format

	* install_interactive.pm (partitionWizardSolutions): 
	use only TrueFS for existing_part
	(partitionWizard): have only "loopback" for lnx4win

	* pci_probing/pcitable: associate Voodoo5 with Voodoo5

	* share/Cards+: add Voodoo5

	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
	for smp)

2000-09-14  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-12  François Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, mouse.pm: moved probing serial port before to
	detect a wacom tablet (even if a PS/2 or USB mouse is found).
	* help.pm: corrected reference to previous version of LM (jloup).
	* install2.pm: removed duplicate code for getting network
	configuration, using network module.
	* netconnect.pm: intf is now a hash and no more an array.
	* network.pm: changed nature of intf to hash from array, reworked
	write_resolv_conf function to keep old code in comment but only
	when not used anymore (to make it easier by hand modification).
	* printer.pm: SOCKET accessible to expert only (jloup).
	* printerdrake.pm: local port only available for expert if a
	printer has been detected (jloup).

2000-09-11  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
	experimental support for expert users.
	* install_steps_interactive.pm: removed question to keep XF3.

2000-09-05  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: removed all previous URI specific mode and
	added socket and expert URI general mode.
	* printer.pm: fixed bugs, start lo interface before cups.

2000-09-04  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added pnm2ppa and lm110 support in cups
	configuration. probe for printer device (parallel) and try to
	install usb for printer.
	* printer.pm: removed local printer configuration for cups (keep
	only local configuration using URI).

2000-09-01  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
	is installed, make 16bits by default on 3D hardware acceleration,
	fixed selection of hardware for hardware acceleration.
	* install_steps.pm: add cups for printer configuration, used for
	auto_install. added new function to add packages only if requires
	are already satisfied.
	* standalone/printerdrake: updated.

2000-08-31  dam's  <damien@mandrakesoft.com>

	* moved many things to network.pm and any.pm
	* everything should be broken now.

2000-08-31  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: removed printer default config (now obsoleted).
	* install_steps_interactive.pm: add cups support.
	* printerdrake.pm: add cups support.
	* printer.pm: add cups support.

2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>

	* install_any.pm (setPackages): install the right glide module
	according to the Voodoo card detected.

	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
	(autoDefaultDepth): default depth to 16 for Voodoo cards except
	for Voodo5 ones.

2000-08-29  dam's  <damien@mandrakesoft.com>

	* moved pppConfig in netconnect.pm and any.pm
	* moved miscellaneousNetwork in any
	* modem configuration is now useable in standalone mode.

2000-08-29 David BAUDENS <baudens@mandrakesoft.com>

	* install_steps_interactive.pm: change Small/Normal/Full ->
	  Minimum/Recommanded/Complete (aka make FredB happy)

2000-08-28  dam's  <damien@mandrakesoft.com>

	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
	and french alcatel ADSL implemented.
	* Xconfigurator.pm (autologin) : use of the new autologin system.

2000-08-24  François Pons  <fpons@mandrakesoft.com>

	* ../update_kernel*: changed reference from extract_archive to
	packadrake.
	* Makefile*: added live_install and live_install2.
	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
	updated to use packdrake now.
	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
	manage live upgrade.
	* modules.pm: use standard modprobe command for load in live
	upgrade.
	* netconnect.pm: added minimal modification for being compilable.
	* rescue/list: added packdrake and sfdisk.
	* live_install, live_install2: live upgrade of package.

2000-08-22  dam's  <damien@mandrakesoft.com>

	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
	* added isdndb.net: providers database

2000-08-20  dam's  <damien@mandrakesoft.com>

	* moved Netconnect.pm to netconnect.pm
	* moved DrakFuck to drakfuck

2000-08-18  Pixel  <pixel@mandrakesoft.com>

	* share/Cards+: for i810, force VideoRam

2000-08-18  dam's  <damien@mandrakesoft.com>

	* modules.pm: added isdn type in @drivers_by_category. corrected
	load_thiskind (thx pixel) : it's not unsafe anymore
	* Netconnect.pm: just display PCI isdn card recognized.
	
2000-08-17  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: many cleanup. moved some functions to common,
	any or install_interactive (newly created)

2000-08-16  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm(configureNetwork): added call to
	isdn configuration
	* added standalone/DrakFuck: standalone entry point to configure
	internet connexion.
	* added Netconnect.pm: internet connexion functions.

2000-08-11  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectInstallClass): yet a bigger
	warning so that people don't choose expert installs. Also set the
	focus on "Custom" by default.
	
	* install_steps_interactive.pm (doPartitionDisks): created, calls
	the wizard.
	* install_steps.pm (doPartitionDisksBefore,
	doPartitionDisksAfter): created (was mainly in
	install2::doPartitionDisks)
	* install2.pm (doPartitionDisks): much cleanup
	* install_any.pm (partitionWizard): working state (still rough)

2000-08-08  Pixel  <pixel@mandrakesoft.com>

	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
	cdrom addmedia

2000-08-07  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Resize): 
	* install_steps_gtk.pm (doPartitionDisks): remove the
	before_leaving ensuring the filehandle is closed
	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
	the filehandle is closed

2000-08-07  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added SiS6326 in the list of chipset that
	needVideoRam, reported on ml.
	* install_steps.pm: fixed auto install of printer.

2000-08-06  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf): created this GREAT function
	that should have been created a long time ago.
	* any.pm, install_any.pm, install_steps_gtk.pm,
	install_steps_interactive.pm: a lot of rewrite to use the new
	ask_from_listf, a lot of nice cleanup!

	* fs.pm (df): created, returns the free space of the part. Save it
	in $part->{free}

	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
	the device in case of error
	* resize_fat/main.pm (new): ensure the closing of the device in
	case of error

	* install_any.pm (partitionWizard): the great partitioning wizard
	is created. Not finished yet (nor called from anywhere)

	* install_steps.pm (doPartitionDisksLnx4win): created function out
	of doPartitionDisks

	* install_steps_gtk.pm (installPackages): removed the displaying
	of size to install (people are bothered cuz not the same size)

2000-08-06  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): use drawing area
	instead of button. Implemented all steps events. 

2000-08-05  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): test a hack for usb mouse via hub
	(sparhawk@enteract.com)	

	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
	hasBeenDirty, otherwise believe the flag saved
	* partition_table.pm (write): flag hd as hasBeenDirty

	* install2.pm: a few renaming of methods so that the step names
	correspond to install2 function and install_steps* methods (eg:
	configureX & setupXfree unified to configureX)

2000-08-04  dam's  <damien@mandrakesoft.com>

	* any.pm (setAutoLogin): added this method to write xdm-config
	* Xconfigurator.pm: clenead autologin code and use of above method

2000-08-04  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
	it in case of max_size reached. only purpose is the log!

	* install_steps_interactive.pm (choosePackages): in newbie, ask
	between Small/Medium/Full install
	* install_steps_interactive.pm (choosePackages): in expert, have
	the min_mark be 0 instead of 1

	* common.pm (find_index): added this nice function

	* install_any.pm (getAvailableSpace_mounted): use common::df
	* loopback.pm (getFree): use common::df
	* commands.pm (df): use common::df
	* common.pm (df): added

	* diskdrake.pm (Resize)): add resizing of reiserfs
	* share/list.i386: add resize_reiserfs


2000-08-02  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
	more up to date, I'll add the list of wm to launch at boot. It
	writes in /etc/X11/xdm/xdm-config.
	
2000-08-01  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)

	* services.pm: separation between interaction and action.
	* install_steps.pm (servicesConfig): the job is now done here	
	* install_steps_interactive.pm (servicesConfig): only the asking
	part	

2000-08-01  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed the below fixe, now ok.
	* Xconfigurator.pm: fixed a bug for using default card flags
	setting, add support for GeForce DDR for both 3.3 and 4.0.
	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
	XFree 3.3 as unsupported in XFree 4.0.
	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".

2000-07-31  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed provided package with choice in deps used with a
	base package, complicated but kernel-fb or similar can be
	unselected now.

2000-07-27  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: changed expert message to ask
	using XFree 3.3 instead of XFree 4.0 used by default (server).
	* Xconfigurator.pm: make sure only one server is installed,
	default to XFree 4.0 if supported unless XFree 3.3 accept
	3D acceleration and not XFree 4.0, ask user in such case.
	* pci_probing/pcitable: added Intel 815 pci ids.

2000-07-26  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: applied new LN stars, logo title and help
	logo. improved steps appearences.
	* modified share/step-*.xpm
	* added share/help.xpm
	* updated ../HACKING to ling help logo.

2000-07-21  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: enable 3D acceleration configuration with
	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
	Utah-GLX accelerated module.

2000-07-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
	* move some README content to ../HACKING

2000-07-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: added autologin boxes.
	result is in {miscellaneous}{autologin} and in
	{miscellaneous}{autologuser}
	
2000-07-19  François Pons  <fpons@mandrakesoft.com>

	* any.pm: added default root to existing root device when adding
	an entry in bootloader.
	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
	when they are identical.
	manage hackkernel by suggest an entry by default if installed.
	* install_steps.pm: reworked symlink closure for bootloader
	to keep previous configuration.

2000-07-11  François Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
	this include a configure_entry from silo.pm to build a initrd if
	used.
	* share/compssList: added kde2 packages.
	* share/compssUsers: added kde2 group, renamed kde to kde1 group
	specific.

2000-07-07  François Pons  <fpons@mandrakesoft.com>

	* install2.pm (choosePackages): always execute setPackage to copy
	hdlist* and depslist files (support mixed partitionDisks and
	choosePackages).
	* install_any.pm (setPackages): avoid clearing upgrade flag.
	* install_steps.pm (choosePackages): use $first_time to avoid
	reselection of packages according to compssList.
	* install_steps_interactive (choosePackages): use $first_time and
	$individual to avoid reselection of packages according if user go
	back to step choosePackages.
	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
	depslist files in /var/lib/urpmi.
	* diskdrake.pm: fixed uneditable combo for Mount point action.

2000-06-23  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: better approach for Sun* server in newbie.
	* fs.pm: added romfs support for mount.
	* fsedit.pm: changed auto allocation for partitions for sparc*.
	* install2.pm: restored bootdisk creation and auto install boot
	disk creation for sparc*.
	* install_any.pm: changed vfat to romfs when mounting kickstart
	floppy on sparc*.
	* install_steps.pm: avoid proposing formating sunos partition.
	* install_steps_interactive.pm: boot disk for sparc* and support for
	installation of SILO on /boot partition (sparc*).
	* install_steps_newt.pm: removed cylinder 0 bug warning.
	* interactive.pm: fixed typo for not_edit set to 1 by default.
	* partition_table.pm: fixed get_holes on sparc* where a whole disk
	partition caused problems.
	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
	* silo.pm: handle /boot partition, install silo.conf in /boot and
	make a symlink from /etc.
	* share/list.sparc: added losetup and genromfs for boot disk creation.

2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: changed the way console font data is written; not all
	of the [0], [1], [2] values must defined, so three cases must be used.
	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
	be used by console-tools to load the proper compose table

2000-06-20  François Pons  <fpons@mandrakesoft.com>

	* c/sbus.c: added some functions for silo.c integration.
	* c/silo.c: initial release including write in prom, and translation
	of disk name from openprom to linux, rh version modified.
	* silo.pm: added write in prom, support of sunos boot from silo.
	* partition_table.pm: added support for ufs partition like windows one.
	* install_steps_interactive.pm: added other entries in silo.
	* install_steps.pm: support sunos partition.
	* install_any.pm: automatically mount sunos partition with diskdrake.
	* fsedit.pm: added /mnt/sunos suggested mount point.
	* fs.pm: added ufs support for mount.

2000-06-19  François Pons  <fpons@mandrakesoft.com>

	* crypto.pm: modified for getting sparc crypto file for sparc*.
	* modules.pm: make sure to load sd_mod when needed.
	* pci_probing/main.pm: always use loaw_endian in pci structs.
	* pci_probing/translate-pcitable.pl: added arch specific module name
	translation.

2000-06-16  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): rename conf.modules to modules.conf if
	needed. Outputs to modules.conf

	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
	already a scsi cdrom drive

2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* pkgs.pm: added 'acon' requirement for all right-to-left languages

2000-06-07  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: added SunOS partition as blue for diskdrake.
	* install_steps_interactive.pm: make sure of no division by zero may
	happen.
	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
	* modules.pm: make sure of loading sd_mod module after any scsi module.
	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
	* pkgs.pm: corrected by use of parabolic solution for size approximation.
	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.

2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* install_steps.pm,lang.pm: added load_console_font, to load the 
	proper console fonts (text mode install is not very useful otherwise)

2000-06-03  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs

2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
	it fits better with the other fonts. Added a 'README' file with
	some comments and the required copyright notice

2000-05-29  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added support for SBUS card autodetection.
	* commands.pm: added lssbus to list SBUS devices detected.
	* detect_devices.pm: removed alpha restriction on USB.
	* install_steps_interactive.pm: added SBUS support.
	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
	* c/stuff.xs.pm: added wrapper for sbus.c interface.
	* sbus_probing/main.pm: initial revision (inspired from kudzu).

2000-05-27 Adam Lebsack <adam@mandrakesoft.com>

	* share/list.ppc: various PPC modifications, for HFS
	* partition_table_mac.pm: bug fixes
	* partition_table.pm: various HFS fixes, isHiddenMacPart()
	* diskdrake.pm: added HFS to top buttons when run on PPC
	* keyboard.pm: fixed name of mac-fr2-ext keymap
	* install_steps_gtk.pm: added Xpmac server support for PPC.
	* install_steps_interactive.pm: disallow hardware configuration on PPC for
	now.  All drivers should be in the kernel. setup_this_kind().
	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
	* fs.pm: fix argument for HFS formatting.	
	* Makefile: special installation of PPC files.

2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
	alpha|sparc.

2000-05-25  François Pons  <fpons@mandrakesoft.com>

	* silo.pm: added configure_entry to try creating an initrd for an image
	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
	* install2.pm: removed create boot disk and create auto install disk on
	sparc*. force writing of /etc/conf.modules for step setupBootloader.
	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
	* install_steps_interactive.pm: added missing $prefix for glob_. call
	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
	* modules.pm: updated alias for sparc*.
	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
	the very beginning.
	* printer.pm: fixed typo.
	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
	resolution for these server too.

2000-05-24  François Pons  <fpons@mandrakesoft.com>

	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
	* partition_table_sun.pm: fixed a bug when reading partition table
	with unused partition in the middle of the table.

2000-05-23  François Pons  <fpons@mandrakesoft.com>

	* common.pm: update arch to take into account sparc and sparc64. added
	better_arch and compat_arch function.
	* silo.pm: fixed adding new kernel automatically.
	* install2.pm: removed create boot disk stuff for sparc*.
	* install_steps.pm: added initrd generation for alpha. added ldconfig
	at end of installation. removed /usr/bin/dumpkeys existence test on
	sparc*, should be added in the future.
	* install_steps_interactive.pm: removed supermount for sparc*.
	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
	support for sparc*. removed screen limit of 1024x768.
	* detect_devices.pm: fixed problem on machine with really no IDE interface.
	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
	partition.
	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
	fixed correctSize and invCorrectSize to take back a linear approximation
	above 9Gb approximatively. removed ftp rewind as broken currently.
	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
	globing (removed) against existing '*'.
	* partition_table.pm: removed support for non SUN partition table, as it
	may freeze the kernel or may be blanked?
	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
	for permedia2 card (3DLabs server).
	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
	* Makefile: added support for modules and modules64 for sparc*.
	* c/stuff.xs.pm: added kernel_arch function for getting the current true
	architecture provided by the kernel (uname -m).

2000-05-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): the URL link to doc must
	be $lang/index.html, not only $lang.

	* standalone/mousedrake: add handling of XF86Config-4

	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)

2000-05-08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the touch of some files here to please linuxconf
	
	* install2.pm (miscellaneous): s/KBD/KEYBOARD/

	* lilo.pm (install_grub): don't keep symlinks for reiserfs
	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)

	* install_any.pm (getHds): default mount point for windobe in
	lowercased for StartOffice(!)

2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
	* keyboard.pm: Added new Lithuanian keyboard and changed the
	  string for brazilian ABNT-2 to state more clearly its ABNT nature
	  (it is not a standard PC keyboard; it uses some different keycodes)

2000-05-07  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): return availableCorrected
	instead of available

	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)

	* modules.pm (text2driver): same as text2lang below
	* keyboard.pm (text2keyboard): same as text2lang below
	* lang.pm (text2lang): replace the while (... each) by a foreach
	(keys) (because each is dangerous if loop is exited)

	* install_steps_interactive.pm (selectKeyboard): better handling
	of multiple langs question.

	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)

	* install_steps_interactive.pm (setup_thiskind): remove ide-*
	from modules displayed as loaded.

2000-05-06  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
	/usr) are not on not trueFS

	* any.pm (setupBootloader): add $prefix for the 2 glob_'s

2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua

2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* printerdrake.pm: fixed English error

2000-05-05  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): remove the special case
	for fbdev.

	* install_steps_interactive.pm (setup_thiskind): replace return by
	next in case load_module fails.

	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade

	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4

	* pkgs.pm (correctSize): updated for 7.1

	* install_any.pm (getAvailableSpace): move the removing of
	$minAvailableSize here.

2000-05-04  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (configurePrinter): give clicked to printerConfig

	* interactive.pm (ask_from_entries_ref): set default val if not_edit

	* interactive_newt.pm (ask_from_entries_refW): remove setting of
	default val. Now done in interactive::ask_from_entries_ref

	* interactive_gtk.pm (ask_from_entries_refW): handle empty value

	* modules.pm (read_already_loaded): ensure that already loaded
	modules are put in %loaded.
	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)

	* lilo.pm (install_lilo): truncate label's to 15 chars

	* install_any.pm (generate_ks_cfg): fix missing space
	* install_any.pm (generate_ks_cfg): fix bug for nfs comand

	* install2.pm: get rid of autoformat
	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat

2000-05-03  Pixel  <pixel@mandrakesoft.com>

	* any.pm (setupBootloader): replace ask_many_from_list by
	ask_from_list for bootloader choice

	* services.pm (drakxservices): stop immediately service if removed

	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
	* install_steps.pm (afterInstallPackages): touch some files to
	please linuxconf

2000-05-03  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: updated min size, fixed kppprc generation.
	* install_any.pm: make sure postinstall-rpm is here before
	erasing (avoid error on reboot only).

2000-05-02  Pixel  <pixel@mandrakesoft.com>

	* raid.pm (format_part): don't call raid::make if part is already
	formatted (as raidstop fails)

	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
	more	

	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
	fail a simple warning.

	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
	* share/MonitorsDB: take new one from RedHat

	* standalone/drakboot: added kfloppy

	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
	not to have it)

2000-05-01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): remove
	NIS_server, use NIS instead
	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead

	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): fix yet another bug for
	ttf from windobe handling

	* install_steps_interactive.pm (selectInstallClass): hide beginner
	mode in corporate. Display special help.

2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
	text to be properly aligned (reported by Craig Chang
	<craig_chang@taipei.siscomm.com.tw>)
	* common.pm: now that po handling is correct, I changed the order
	of reading variables so that it follows the standards ($LANGUAGE first)
	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251

2000-04-28  François Pons  <fpons@mandrakesoft.com>

	* install_steps*.pm: added support for selection of package during
	upgrade the same way it is done for installation. added check of
	minimal size, abort else (at least let the user know about :-)
	fixed crypto if no network interface available.
	* install2.pm: fixed problem during upgrade that lost network
	configuration.

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_raw): don't call commands::insmod, do it in
	place. Merge with load_multi

	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
	symlinking	

	* Xconfigurator.pm (cardConfiguration): load module agpgart for
	i810
	
	* install_any.pm (getHds): changed the mount point setting for
	windows partitions as device_windobe is not unique

2000-04-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): changed to adapt to
	new hidden format

	* install2.pm (@installSteps): changed the way hidden is handled.
	Now it is a true perl expression (great power now)

	* install_steps_gtk.pm (selectInstallClass1): update steps window
	before asking normal/devel/server. Nicer!

	* install_steps_interactive.pm (configureNetwork): when "Cancel"
	pressed at network interface configuration do not skip all
	configuration.	

2000-04-26  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm (pppConfig): modified a lot, removed template
	file for ifcfg and chat file.

2000-04-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
	the tree column (so that the checkbox are always visible without
	scrolling)	

	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
	to propose them in console
	
	* install_any.pm (relGetFile): added auto_inst to files to get
	from Mandrake/base

	* install2.pm (main): changed auto_inst behaviour

	* standalone/adduserdrake: fix a bug (s/$o/$in/g)

	* interactive_newt.pm (ask_from_entries_refW): now handling
	complete/changed/focus_out callbacks (at least more than before)	

	* Newt/Newt.xs: added rough callback handling

2000-04-25  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added support for PPA more easily, allow
	printers entry using ppa driver event if pnm2ppa not installed,
	install it if neccessary after.
	* network.pm, install_steps.pm, install_steps_interactive.pm:
	added support for stoping a network interface, usefull for ppp0 to
	avoid using it too long.
	* install_steps.pm: fixed missing local on pap_secrets file.

2000-04-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install): moved the generation of the keytable here. It
	is used by both lilo & grub (lilo is not always installed as was
	assumed)	

	* common.pm (formatAlaTeX): remove bounding spaces

	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
	mark 25 in beginner
	* install_steps_interactive.pm (choosePackages): set $min_mark to
	25 in beginner

2000-04-24  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setupXfree): add a yesorno
	question for choosing between XF4 and XF3 in expert

	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window

	* install_any.pm (update_userkderc): make sure uid and gid are kept

	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert

	* partition_table.pm (add_extended): handle a 3rd arg,
	$extended_type to tell which kind of extended partition is wanted
	* partition_table.pm (adjust_main_extended): in non-expert,
	automatically set extended to linux-extended if there's only
	linux-type partitions.	

2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>

	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
	  and not for byte. RAM is expressed in megabytes -> MB

2000-04-19  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
	* printer.pm: fixed wrong prototype of print_pages.
	* install2.pm: set version to 7.1 for crypto stuff.
	* crypto.pm: commented ackbar crypto site.

2000-04-17  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
	linuxconf)	

2000-04-14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): don't
	ask about checking bad blocks for reiserfs, cuz not handled

	* fs.pm (mount): reiserfs handling
	* fs.pm (format_reiserfs): added
	* fs.pm (write_fstab): add option "notail" for reiserfs if
	the partition holds the kernel (/boot or /)

	* partition_table.pm (isTrueFS): added, replaces most occurences
	of isExt2

2000-04-12  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: force installation step if package have been
	selected on step choose packages.
	* install_any.pm: protected against die in perl (setstep or
	theme_changed).

2000-04-11  François Pons  <fpons@mandrakesoft.com>

	* resize_fat: added some limits verification.
	* interactive_gtk.pm: corrected swap of arg with help adding.

2000-04-10  François Pons  <fpons@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
	which is used by printerdrake only. drops key bindings.

2000-04-07  François Pons  <fpons@mandrakesoft.com>

	* tools/serial_probe: obsoleting pnp_serial which is now replaced
	by this one, taken from kudzu, really faster and probe all serial
	devices at one time. modified to probe correctly modem :-)
	* mouse.pm: updated to use serial_probe interface of
	detect_devices.pm.
	* detect_devices.pm: modified to use serial_probe, cache probed
	devices to avoid reprobing.

2000-04-06  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps.pm: added support
	for peerdns options of ppp, so removed dns address unless expert.

2000-04-05  François Pons  <fpons@mandrakesoft.com>

	* crypto.pm, install_steps_interactive.pm, install2.pm,
	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
	and depslist-crypto. dependancies are not supported but with a
	simpler format of depslist file where closure are not done and
	only package name are used for dependancies.
	* pkgs.pm: added better support for multi CD manipulation,
	including selection and refus.

2000-04-04  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: modified selection packages from compssList by
	incremental selection, much more quickly.
	added selected medium for selecting a package.
	* install_any.pm: refused media hash transfered to selected value
	of media table.
	@needToCopy list should only have package of default medium.

2000-04-03  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha

2000-03-31  François Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: made changeMedium sub modification
	permanent.
	* pkgs.pm: modified upgrade to avoid use of header.

2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: some more choices for PPC keyboards

2000-03-30  François Pons  <fpons@mandrakesoft.com>

	* install2pm: added eval around loading af_packet and postinstall
	copy of RPMS.
	* devices.pm: added /dev/kdb for SPARC.
	* install_any.pm: modified multi CD management, postinstall copy
	of RPMS.
	* install_steps_gtk.pm: added support for Xsun server for SPARC.
	* install_steps_interactive.pm: added multi CD dialog box for
	selecting CD available. Serialized ethernet configuration and ppp
	configuration.
	* pkgs.pm: added check for infinite recursion for bad depslist.
	* printer.pm: better test for reparse of printerdb.
	* Xconfigurator.pm: added support for Xsun server for SPARC.

2000-03-30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection

2000-03-29  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (wait_messageW): add some padding (nicer)

	* install_steps_interactive.pm (generateAutoInstFloppy): created,
	creates a floppy for auto installs.

	* install_any.pm (generate_ks_cfg): created, generates stage1
	ks.cfg file

	* share/po/DrakX.pot: added special comment for grub entry

2000-03-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): sort langs for
	many-lang install

	* mouse.pm (write): add WHEEL telling if a wheel mouse is there

2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added entries for all three Armenian keyboards

2000-03-26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (install_urpmi): full support for multi-hdlist's	

	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
	$prefix/var/lib/urpmi
	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
	fake name. Access via /tmp/$hdlist is given for non-fake name

	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)

2000-03-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm: updated to the new format of entries. It was an hash.
	Now the key is field kernel_or_dev, and entries is an array.
	
	(get): added, it returns the entry using a kernel
	   (needed because entries is no more a hash)

	* install_steps_interactive.pm (setupLILO): adapted to the new format

	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	

	* fsedit.pm (suggest_part): if suggested part contains a field
	"hd", ensure the partition is created on this hard drive

	* install2.pm (main): before leaving installation, remove
	/var/lib/urpmi if urpmi not installed	

	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
	of $size

2000-03-24  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
	(ultra66) without rebooting and making special floppy :)

	* lilo.pm (install_grub): much better grub configuration (better
	than lilo's :pp)

	* install_steps.pm (setupBootloaderBefore): remove entry floppy
	for security > 3

2000-03-23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): added, takes care of telling
	the X server if the user changed the mouse type. Only done if
	a serial mouse is chosen.

	* install_steps_newt.pm (doPartitionDisks): add a call to

	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
	devfs (it looses the symlink /dev/mouse)

2000-03-22  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry

2000-03-20  François Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, fs.pm, install_any.pm: added supports for
	LS-120 floppy drive and icons on desktop of KDE (untested).
	* printer.pm, printerdrake.pm: added supports for PPA interface in
	new rhs-printfilters, always enable "Print text as postscript"
	option for such printers.

2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: changed XKB name for Swedish keyboard
	  changed XKB names for Russian and German keyboards
	  added a choice for "Croatian" keyboard
	* share/compss{,List}: added various new locales-*, ispell-* 
	  and netscape-* files. changed ppa to pnm2ppa.

2000-03-17  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added setup for all configured queue.
	* install_steps_interactive.pm: modified for retrieving packages
	or current configuration.
	* printer.pm: correction, tested retrieve of printer
	configuration without printtool comments in printcap file: added
	update of entry according to gsdriver used (untested again).
	* printerdrake.pm: better handling of cancel, manage of multiple
	queue definition together (as lp|My printer).

2000-03-16  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: moved in printerdrake.pm the test
	of printer usage.
	* printerdrake.pm: heavy modification to handle multiple queue,
	corrected some bugs too, added much more features as printtool.
	* printer.pm: added more features for filter, allow printer to be
	retrieved without help of printtool id in printcap file (untested).

2000-03-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Loopback): handling of the file loopback: test
	existence of the file and take its size.

2000-03-14  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: corrected for duplicate file on other CD.

2000-03-13  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (floppies): don't return hash but the device name

2000-03-13  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm, install_any.pm: small correction for multiple media
	installation.
	* tools/syncrpms: added for handling synchronisation of multiple source
	rpm directories (and multiple target), include cleaning.
	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
	after normal packages installation (printer, network, X11...), may
	be used to duplicate on other CD some important stuff of the first
	one.

2000-03-12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): compute the
	max_size very simply (sum of all package sizes), otherwise too costly

	* pkgs.pm (install): call cleanHeaders at the end
	* pkgs.pm (cleanHeaders): created

	* install2.pm (miscellaneous): /etc/msec/init.sh is now
	/usr/sbin/msec (yoann thanks for not telling :pp)

	* pkgs.pm (install): remove the $prefix of mountpoints for not
	enough room to install error message

2000-03-11  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_create_window): add callback on focus to
	ensure_focus. The result is no more 3 focus states with 2 buttons.

	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling

	* raid.pm (make): check the result of mkraid. Suggest raidtools
	are missing in standalone diskdrake

	* devices.pm (set_loop): created, searches for an available
	loopback and sets the file to it

	* lilo.pm (dev2grub): fixed a missing slash

	* interactive_gtk.pm (wait_message_nextW): do not update if same
	message, otherwise silly gtk won't do anything and we'll wait
	forever :(

2000-03-10  François Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account multiple media
	installation.

2000-03-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (@install_classes): cleanup, no more i18n (is now in
	install_steps_interactive), remove old entries

2000-03-09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): don't add alias block-major-11 in every case
	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)

	* fs.pm (format_*): move the @options before the device

	* loopback.pm: created, added a lot of stuff for loopback in
	diskdrake.pm, fs.pm...

2000-03-08  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: %type2fs replaced ox402 by 0x402

	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")

	* install_any.pm (install_urpmi): update for new hdlist.cz2

2000-03-07  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/

	* install_steps_interactive.pm (addUser): force add a normal user
	for security 4

2000-03-05  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
	(tis the Gtk-Perl 0.7002 was of doing)

2000-03-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): add ide-floppy to the modprobes of
	post-install supermount

2000-03-03  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (ps): add RSS to ps command

2000-03-02 Adam Lebsack <adam@mandrakesoft.com>

	* mouse.pm: added mac mouse detection to mouse::detect.
	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.

2000-03-01  François Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account smaller
	transaction during installation.
	still a lot of test to perform, no provides updated currently and
	building of hdlist.cz2 and depslist.ordered need old files...
	nothing done for hdlist.gz during post installation, but
	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
	installation of packages as extract_archive need a true file].

2000-03-01  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install_grub): creation

	* network.pm (write_interface_conf): ONBOOT = !pcmcia

	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler

2000-02-29  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: moved common network stuff from "net" to "network"
	(modules like nfs lockd...)

	* fs.pm (write_fstab): moved the sort to the right place

	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
	set LANGUAGE=C before

	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
	be a decimal value :)

	* install_steps_gtk.pm (create_logo_window): set_name logo for
	logo window
	* share/install.rc: force disabling of background image theme

	* install_steps_gtk.pm (enteringStep): add step information for
	console 1

	* any.pm (addKdmIcon): new function
	* install_steps.pm (addUser): handle field icon
	* install_steps_interactive.pm (addUser): add choice of kdm icon
	* standalone/adduserdrake: add choice of kdm icon

	* diskdrake.pm (ask_all_data...): change for easier i18n

	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
	(need cleaning?)
	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
	option in expert
	* install2.pm (miscellaneous): add CLEAN_TMP option for
	/etc/sysconfig/system	

	* install_steps_interactive.pm (miscellaneous): forbidden
	useSupermount if high security.	

	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)

2000-02-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
	800x600.	

	* partition_table_raw.pm (get_geometry): when the
	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave

	* install2.pm (main): use modules::load_multi to increase boot
	start time

	* modules.pm (load_multi): added this function for loading many
	modules at once.

	* install_steps_gtk.pm (new): increase time before timeout

	* detect_devices.pm (cdroms): change the device associated with
	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	

	* modules.pm (write_conf): sort scsi_hostadapter's

2000-02-27  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): load ide-probe and the like in 'prereq' type
	so no aliases are added to conf.modules

2000-02-25  Pixel  <pixel@mandrakesoft.com>

	* devices.pm (make): small code cleanup

	* partition_table_raw.pm (adjustEnd): more explicit error message

	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
	big after each allocation) making adjustEnd cry

2000-02-24  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (new): added the "new" method to initialize
	windowheight for isStandalone

	* install_steps_gtk.pm (new): returns undef in case no X server
	works	

	* install2.pm (main): moved the ejectCdrom from install_steps::END
	to here
	* install2.pm (main): fix the $SIG{SEGV} handler
	* install2.pm (main): added a "try again" in text install if the
	"new" fails

	* install_steps_interactive.pm (createBootdisk): fix an error for
	non fdX choice of floppy drive
	
	* install_steps_interactive.pm (setup_thiskind): remove the
	"defined @l"

2000-02-23  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (%suggestedPartitions): remove any /boot entries
	* install2.pm (selectInstallClass): removed the special code to
	/boot entries from suggestedPartitions for on non-intel (and it
	was buggy :)
	* fsedit.pm (@suggestions): remove the /boot entry
	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
	* fsedit.pm (suggest_part): remove the 1024 cylinder special case

	* install_steps_interactive.pm (setupLILO): replace linear option
	by lba32

	* lilo.pm (suggest): add lba32 by default

	* install_steps_interactive.pm (load_thiskind): moved the HPT
	stuff to install_any::ultra66 and call it.
	Add sound card configuration (3 lines :)

	* my_gtk.pm and interactive_gtk: resize the list and tree based on
	root window size

	* install_steps_gtk: $width and $height goes $::rootwidth and
	$::rootheight, also other dimensions goes global (main::)

	* commands.pm (strings): replace the typo \{$n,} by {$n,}

2000-02-23  François Pons  <fpons@mandrakesoft.com>

	* build_archive, extract_archive: changed format of TOC to speed
	up extraction of archive, now 5 to 6 times faster to read TOC :-)
	
2000-02-22  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: load "Cards" database only to translate NAME
	to fields. Added file CardsNames created from Cards using
	share/Cards2CardsNames. Kind of list of normalized NAMEs	

	* MonitorsDB: replace the ` ' separator for vendor by `|'

	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	

	* interactive_gtk.pm (ask_from_treelist): creation of
	ask_from_treelist. Usage is just the same as ask_from_list with
	one more argument (the separator eg: |, /)

2000-02-21  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed deadlock while trying to create partition
	when available space is equal or less than 2 cylinders. fixed
	Create action on corrupted partition by removing stalling window.
	Blocked partition table writing if there are error by forcing user
	to correct partition table.
	* partition_table.pm: fixed typo in verifyParts with cdie, added
	verifyParts on Resize action.
	
2000-02-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_big_help): display the help in full
	screen	

	* my_gtk.pm (_create_window): add big help on F1

	* common.pm (add2hash): now returns the first parameter

	* mouse.pm (detect): really defaults to serial mouse

	* interactive.pm: add ask_many_from_list_with_help and
	ask_many_from_list_with_help_ref

	* services.pm: creation, it handles what was in
	standalone/drakxservices

2000-02-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
	"/dev/psaux" and not "psaux")

	* diskdrake.pm (Create): show start sector even for non-expert on
	non-i386

2000-02-16  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): add defaults to serial mouse

	* install_steps_gtk.pm (createXconf): remove the defaults to
	serial mouse

2000-02-15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: "After %s partition %s," inlined otherwise does
	not please pablo and translators...

2000-02-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): hide start sector choice for non-expert

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm (get_geometry): do not use the cylinder
	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
	the total_sectors using HDIO_GET_IDENTITY

	* c/stuff.xs.pm: added total_sectors (gives the number of sector
	of a drive)

	* modules.pm (load): ignore error in loading prereq's
	
	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
	z85230 added

	* commands.pm (mount): add modules::load_deps otherwise the
	fs::mount won't succeed insmoding vfat if needed

2000-02-11  François Pons  <fpons@mandrakesoft.com>

	* fixed diskdrake to handle limit case when creating and resizing
	partition table, address size limit and start sector limit.

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): add a callback on SEGV
	-> message printed
	-> that way, ENDs are called (otherwise skipped)

	* install_steps_interactive.pm (setup_thiskind): handles the undef
	value returned by load_thiskind
	
	* install_steps_interactive.pm (exitInstall): do not call
	install_steps::exitInstall

	* install_steps (exitInstall): removed
	* install_steps (END): added (it does ejectCdrom)

	* install_steps_interactive.pm (load_thiskind): returns undef if
	error loading a module

	* fs.pm (format_part): changed the prototype from $;$@ to $;@
	otherwise, @options always have a value (mostly undef) and mkdosfs
	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)

	* install_steps_interactive.pm (setup_thiskind):
	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
	(that way no pci probe the second time)

2000-02-10  François Pons  <fpons@mandrakesoft.com>

	* heavy modification of build_archive and extract_archive to manage
	a TOC directly in archive file, handle bzip2 or gzip compression,
	extract_archive can extract multiple files a time, with minimal
	invocation of uncompress program and follow symlink and expand
	directory contents.
	* use build_archive/extract_archive for locales.
	* fixed a min/max in install_steps_gtk for Resize/Create partition.
	* fixed adjustEnd with dos partition table, take care of magic 63
	sectors at beginning of partitions, a more solid method should be
	used for that.

2000-02-10  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"

2000-02-09  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (add): cdie if maximum number of partitions
	handled by linux is reached

	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
	card or server found

	* install_any.pm (relGetFile): for mdkinst files, take care not to
	have a double '/' (see debbugs #591)

	* install_steps_interactive.pm (configureNetwork):
	purpose: add ability to configure both modem and lan
	         clean up the behaviour

	* fs.pm (write_fstab): 
	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
	also: rewrite of the part writing the fstab.