path: root/perl-install/ChangeLog

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (install_loadlin_config_sys,
	install_loadlin_desktop): extracted from install_loadlin, do not
	call them anymore (remove it?)
	(suggest): put grub in lnx4win install

	* common.pm (availableRamMB): fixed (round to a multiple of 4)	

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
	read file in /usr/share and $prefix/usr/share 
	(isdn_write_config): corrected file to be sh compliant.
	(isdn_write_config): added default route settings for isdn.

2000-09-20  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace es1371 by snd-card-ens1371

2000-09-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 

2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 

	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 

2000-09-20  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: used new package install function.

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
	floppy or not based on its size (for scsi floppy)

	* Xconfigurator.pm (testFinalConfig): check if "server" OR
	"driver" field is set (otherwise XF4 only card won't pass)

	* bootloader.pm (suggest): fix for ``installing the last cooker
	from kenobi:/I on an smp machine i don't get anymore an entry for
	linux-up'' (c chmouel)

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])

2000-09-20  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
	should be detected)

	* lang.pm (get_langs): created, gives rpm install langs
	* install_any.pm (setPackages): give langs::get_langs() to
	readCompssList	
	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
	$langs instead. This fixes the RPM_INSTALL_LANG=all install.

2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* netconnect.pm: make dhcp-client, pump and such not translatable.
	Those are program names and should therefore not be translated,
	that only confuses translators

2000-09-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): corrected @users definition and
	passwd cat.

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* many files: changed some access to get_root to get_root_	
	
	* install_steps_interactive.pm (choosePackages): added code for
	desktop meta_class install type

	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
	emulate3buttons to setMouseLive
	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons

2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>

	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
	added `enter_console' and `leave_console'

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
	META_CLASS

	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
	result (not enough VideoRam), also remove the found resolutions
	* Xconfigurator.pm (main): remove the automatic searching of
	resolutions	
	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
	automatic searching of resolutions.

	* mouse.pm (fullnames): changed the `_' in `[' before Other
	(nicer, uh?)

	* install2.pm (selectMouse): changed clicked to !first_time

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype

2000-09-19  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-18  Dam's  <damien@mandrakesoft.com>

	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
	now in separated function.
	
2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
	if called via "Test again"
	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
	are bounded

	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
	classic and no-fb

	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
	must not be mount points. Also check that /home, /tmp and /usr are
	on trueFS

	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
	case of type "range". die if min > max.

2000-09-18  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
	partition/device display

	* partition_table_raw.pm (zero_MBR): add on the fly require of the
	good partition_table_$type

	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
	assignment to ide burners

	* install_steps.pm (afterInstallPackages): comment out a part of
	the icons mess messing

	* Xconfigurator.pm (cardConfiguration): move Unlisted to
	Other/Unlisted
	* share/CardsNames: updated (for Voodoo5)

	* install_steps_gtk.pm (selectMouse): fix the test to know wether
	the guy has changed the mouse type (to know wether to test the
	mouse or not)

	* install_steps_interactive.pm (selectLanguage): add the license
	
	* install_steps_interactive.pm (choosePackages): have the
	"Recommended" size be the default 
	(in the choice Minimum/Recommanded/Complete)
	
	* diskdrake.pm (Type): fix a typo

	* install_steps.pm (doPartitionDisksAfter): mark partition as
	mounted	

2000-09-17  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-17  Pixel  <pixel@mandrakesoft.com>

	* install/pcmcia_config.patch: cleaned
	
	* diskdrake.pm (Create, Type): have type field not_editable

	* tools/make_mdkinst_stage2: use TMPDIR if available

2000-09-16  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): move
	the setting of toFormat before asking for bad blocks, seems to fix
	things?? weird :-/

	* network.pm (miscellaneousNetwork): fix the setting of focus on
	error (tx2Thomas Poindessous :)	

	* install_steps_interactive.pm (configurePrinter): changed
	"Cancel" to "None" (for Thomas Poindessous :)

	* printer.pm (poll_ppd_base): max polling time raised from 10s to
	30s (for Till)	

	* install_steps.pm (ask_mntpoint_s): don't force partition type to
	be ext2 (at least if it's a known fs) (for Warly)

2000-09-15  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (set_help): save the help message displayed
	in $o->{current_help}
	* install_gtk.pm (create_big_help): display $o->{current_help}

	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
	* install2.pm (selectMouse): adapted for mouse::read now returning
	an hash ref

	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
	one function (now takes the device in the parameter)

	* interactive.pm (ask_from_treelistf): added (just like
	ask_from_listf, but with a tree)

	* Xconfigurator.pm: the reference is now nbuttons to
	know wether to put Emulate3Buttons or ZAxisMapping.
	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
	Banshee too.

	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
	ZAxisMapping.

	* common.pm (availableRamMB): replace availableRam, now use the
	size of /proc/kcore (what else to find the real ramsize?)

	* common.pm (cat__): created

	* install2.pm (main): add field meta_class in $o. Can be
	'desktop', in case option desktop is given, or if /desktop/i is
	found in /VERSION

	* install_steps.pm (miscellaneous): for lnx4win, always have
	'mem=' (so that the initrd is visible by both windows

	* install2.pm (main): add option "desktop"

	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format

	* install_interactive.pm (partitionWizardSolutions): 
	use only TrueFS for existing_part
	(partitionWizard): have only "loopback" for lnx4win

	* pci_probing/pcitable: associate Voodoo5 with Voodoo5

	* share/Cards+: add Voodoo5

	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
	for smp)

2000-09-14  DrakX <install@linux-mandrake.com>

	* snapshot uploaded

2000-09-12  François Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, mouse.pm: moved probing serial port before to
	detect a wacom tablet (even if a PS/2 or USB mouse is found).
	* help.pm: corrected reference to previous version of LM (jloup).
	* install2.pm: removed duplicate code for getting network
	configuration, using network module.
	* netconnect.pm: intf is now a hash and no more an array.
	* network.pm: changed nature of intf to hash from array, reworked
	write_resolv_conf function to keep old code in comment but only
	when not used anymore (to make it easier by hand modification).
	* printer.pm: SOCKET accessible to expert only (jloup).
	* printerdrake.pm: local port only available for expert if a
	printer has been detected (jloup).

2000-09-11  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
	experimental support for expert users.
	* install_steps_interactive.pm: removed question to keep XF3.

2000-09-05  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: removed all previous URI specific mode and
	added socket and expert URI general mode.
	* printer.pm: fixed bugs, start lo interface before cups.

2000-09-04  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added pnm2ppa and lm110 support in cups
	configuration. probe for printer device (parallel) and try to
	install usb for printer.
	* printer.pm: removed local printer configuration for cups (keep
	only local configuration using URI).

2000-09-01  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
	is installed, make 16bits by default on 3D hardware acceleration,
	fixed selection of hardware for hardware acceleration.
	* install_steps.pm: add cups for printer configuration, used for
	auto_install. added new function to add packages only if requires
	are already satisfied.
	* standalone/printerdrake: updated.

2000-08-31  dam's  <damien@mandrakesoft.com>

	* moved many things to network.pm and any.pm
	* everything should be broken now.

2000-08-31  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: removed printer default config (now obsoleted).
	* install_steps_interactive.pm: add cups support.
	* printerdrake.pm: add cups support.
	* printer.pm: add cups support.

2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>

	* install_any.pm (setPackages): install the right glide module
	according to the Voodoo card detected.

	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
	(autoDefaultDepth): default depth to 16 for Voodoo cards except
	for Voodo5 ones.

2000-08-29  dam's  <damien@mandrakesoft.com>

	* moved pppConfig in netconnect.pm and any.pm
	* moved miscellaneousNetwork in any
	* modem configuration is now useable in standalone mode.

2000-08-29 David BAUDENS <baudens@mandrakesoft.com>

	* install_steps_interactive.pm: change Small/Normal/Full ->
	  Minimum/Recommanded/Complete (aka make FredB happy)

2000-08-28  dam's  <damien@mandrakesoft.com>

	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
	and french alcatel ADSL implemented.
	* Xconfigurator.pm (autologin) : use of the new autologin system.

2000-08-24  François Pons  <fpons@mandrakesoft.com>

	* ../update_kernel*: changed reference from extract_archive to
	packadrake.
	* Makefile*: added live_install and live_install2.
	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
	updated to use packdrake now.
	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
	manage live upgrade.
	* modules.pm: use standard modprobe command for load in live
	upgrade.
	* netconnect.pm: added minimal modification for being compilable.
	* rescue/list: added packdrake and sfdisk.
	* live_install, live_install2: live upgrade of package.

2000-08-22  dam's  <damien@mandrakesoft.com>

	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
	* added isdndb.net: providers database

2000-08-20  dam's  <damien@mandrakesoft.com>

	* moved Netconnect.pm to netconnect.pm
	* moved DrakFuck to drakfuck

2000-08-18  Pixel  <pixel@mandrakesoft.com>

	* share/Cards+: for i810, force VideoRam

2000-08-18  dam's  <damien@mandrakesoft.com>

	* modules.pm: added isdn type in @drivers_by_category. corrected
	load_thiskind (thx pixel) : it's not unsafe anymore
	* Netconnect.pm: just display PCI isdn card recognized.
	
2000-08-17  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: many cleanup. moved some functions to common,
	any or install_interactive (newly created)

2000-08-16  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm(configureNetwork): added call to
	isdn configuration
	* added standalone/DrakFuck: standalone entry point to configure
	internet connexion.
	* added Netconnect.pm: internet connexion functions.

2000-08-11  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectInstallClass): yet a bigger
	warning so that people don't choose expert installs. Also set the
	focus on "Custom" by default.
	
	* install_steps_interactive.pm (doPartitionDisks): created, calls
	the wizard.
	* install_steps.pm (doPartitionDisksBefore,
	doPartitionDisksAfter): created (was mainly in
	install2::doPartitionDisks)
	* install2.pm (doPartitionDisks): much cleanup
	* install_any.pm (partitionWizard): working state (still rough)

2000-08-08  Pixel  <pixel@mandrakesoft.com>

	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
	cdrom addmedia

2000-08-07  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Resize): 
	* install_steps_gtk.pm (doPartitionDisks): remove the
	before_leaving ensuring the filehandle is closed
	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
	the filehandle is closed

2000-08-07  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added SiS6326 in the list of chipset that
	needVideoRam, reported on ml.
	* install_steps.pm: fixed auto install of printer.

2000-08-06  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf): created this GREAT function
	that should have been created a long time ago.
	* any.pm, install_any.pm, install_steps_gtk.pm,
	install_steps_interactive.pm: a lot of rewrite to use the new
	ask_from_listf, a lot of nice cleanup!

	* fs.pm (df): created, returns the free space of the part. Save it
	in $part->{free}

	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
	the device in case of error
	* resize_fat/main.pm (new): ensure the closing of the device in
	case of error

	* install_any.pm (partitionWizard): the great partitioning wizard
	is created. Not finished yet (nor called from anywhere)

	* install_steps.pm (doPartitionDisksLnx4win): created function out
	of doPartitionDisks

	* install_steps_gtk.pm (installPackages): removed the displaying
	of size to install (people are bothered cuz not the same size)

2000-08-06  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): use drawing area
	instead of button. Implemented all steps events. 

2000-08-05  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): test a hack for usb mouse via hub
	(sparhawk@enteract.com)	

	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
	hasBeenDirty, otherwise believe the flag saved
	* partition_table.pm (write): flag hd as hasBeenDirty

	* install2.pm: a few renaming of methods so that the step names
	correspond to install2 function and install_steps* methods (eg:
	configureX & setupXfree unified to configureX)

2000-08-04  dam's  <damien@mandrakesoft.com>

	* any.pm (setAutoLogin): added this method to write xdm-config
	* Xconfigurator.pm: clenead autologin code and use of above method

2000-08-04  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
	it in case of max_size reached. only purpose is the log!

	* install_steps_interactive.pm (choosePackages): in newbie, ask
	between Small/Medium/Full install
	* install_steps_interactive.pm (choosePackages): in expert, have
	the min_mark be 0 instead of 1

	* common.pm (find_index): added this nice function

	* install_any.pm (getAvailableSpace_mounted): use common::df
	* loopback.pm (getFree): use common::df
	* commands.pm (df): use common::df
	* common.pm (df): added

	* diskdrake.pm (Resize)): add resizing of reiserfs
	* share/list.i386: add resize_reiserfs


2000-08-02  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
	more up to date, I'll add the list of wm to launch at boot. It
	writes in /etc/X11/xdm/xdm-config.
	
2000-08-01  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)

	* services.pm: separation between interaction and action.
	* install_steps.pm (servicesConfig): the job is now done here	
	* install_steps_interactive.pm (servicesConfig): only the asking
	part	

2000-08-01  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed the below fixe, now ok.
	* Xconfigurator.pm: fixed a bug for using default card flags
	setting, add support for GeForce DDR for both 3.3 and 4.0.
	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
	XFree 3.3 as unsupported in XFree 4.0.
	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".

2000-07-31  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed provided package with choice in deps used with a
	base package, complicated but kernel-fb or similar can be
	unselected now.

2000-07-27  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: changed expert message to ask
	using XFree 3.3 instead of XFree 4.0 used by default (server).
	* Xconfigurator.pm: make sure only one server is installed,
	default to XFree 4.0 if supported unless XFree 3.3 accept
	3D acceleration and not XFree 4.0, ask user in such case.
	* pci_probing/pcitable: added Intel 815 pci ids.

2000-07-26  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: applied new LN stars, logo title and help
	logo. improved steps appearences.
	* modified share/step-*.xpm
	* added share/help.xpm
	* updated ../HACKING to ling help logo.

2000-07-21  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: enable 3D acceleration configuration with
	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
	Utah-GLX accelerated module.

2000-07-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
	* move some README content to ../HACKING

2000-07-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: added autologin boxes.
	result is in {miscellaneous}{autologin} and in
	{miscellaneous}{autologuser}
	
2000-07-19  François Pons  <fpons@mandrakesoft.com>

	* any.pm: added default root to existing root device when adding
	an entry in bootloader.
	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
	when they are identical.
	manage hackkernel by suggest an entry by default if installed.
	* install_steps.pm: reworked symlink closure for bootloader
	to keep previous configuration.

2000-07-11  François Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
	this include a configure_entry from silo.pm to build a initrd if
	used.
	* share/compssList: added kde2 packages.
	* share/compssUsers: added kde2 group, renamed kde to kde1 group
	specific.

2000-07-07  François Pons  <fpons@mandrakesoft.com>

	* install2.pm (choosePackages): always execute setPackage to copy
	hdlist* and depslist files (support mixed partitionDisks and
	choosePackages).
	* install_any.pm (setPackages): avoid clearing upgrade flag.
	* install_steps.pm (choosePackages): use $first_time to avoid
	reselection of packages according to compssList.
	* install_steps_interactive (choosePackages): use $first_time and
	$individual to avoid reselection of packages according if user go
	back to step choosePackages.
	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
	depslist files in /var/lib/urpmi.
	* diskdrake.pm: fixed uneditable combo for Mount point action.

2000-06-23  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: better approach for Sun* server in newbie.
	* fs.pm: added romfs support for mount.
	* fsedit.pm: changed auto allocation for partitions for sparc*.
	* install2.pm: restored bootdisk creation and auto install boot
	disk creation for sparc*.
	* install_any.pm: changed vfat to romfs when mounting kickstart
	floppy on sparc*.
	* install_steps.pm: avoid proposing formating sunos partition.
	* install_steps_interactive.pm: boot disk for sparc* and support for
	installation of SILO on /boot partition (sparc*).
	* install_steps_newt.pm: removed cylinder 0 bug warning.
	* interactive.pm: fixed typo for not_edit set to 1 by default.
	* partition_table.pm: fixed get_holes on sparc* where a whole disk
	partition caused problems.
	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
	* silo.pm: handle /boot partition, install silo.conf in /boot and
	make a symlink from /etc.
	* share/list.sparc: added losetup and genromfs for boot disk creation.

2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: changed the way console font data is written; not all
	of the [0], [1], [2] values must defined, so three cases must be used.
	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
	be used by console-tools to load the proper compose table

2000-06-20  François Pons  <fpons@mandrakesoft.com>

	* c/sbus.c: added some functions for silo.c integration.
	* c/silo.c: initial release including write in prom, and translation
	of disk name from openprom to linux, rh version modified.
	* silo.pm: added write in prom, support of sunos boot from silo.
	* partition_table.pm: added support for ufs partition like windows one.
	* install_steps_interactive.pm: added other entries in silo.
	* install_steps.pm: support sunos partition.
	* install_any.pm: automatically mount sunos partition with diskdrake.
	* fsedit.pm: added /mnt/sunos suggested mount point.
	* fs.pm: added ufs support for mount.

2000-06-19  François Pons  <fpons@mandrakesoft.com>

	* crypto.pm: modified for getting sparc crypto file for sparc*.
	* modules.pm: make sure to load sd_mod when needed.
	* pci_probing/main.pm: always use loaw_endian in pci structs.
	* pci_probing/translate-pcitable.pl: added arch specific module name
	translation.

2000-06-16  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): rename conf.modules to modules.conf if
	needed. Outputs to modules.conf

	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
	already a scsi cdrom drive

2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* pkgs.pm: added 'acon' requirement for all right-to-left languages

2000-06-07  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: added SunOS partition as blue for diskdrake.
	* install_steps_interactive.pm: make sure of no division by zero may
	happen.
	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
	* modules.pm: make sure of loading sd_mod module after any scsi module.
	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
	* pkgs.pm: corrected by use of parabolic solution for size approximation.
	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.

2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* install_steps.pm,lang.pm: added load_console_font, to load the 
	proper console fonts (text mode install is not very useful otherwise)

2000-06-03  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs

2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
	it fits better with the other fonts. Added a 'README' file with
	some comments and the required copyright notice

2000-05-29  François Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added support for SBUS card autodetection.
	* commands.pm: added lssbus to list SBUS devices detected.
	* detect_devices.pm: removed alpha restriction on USB.
	* install_steps_interactive.pm: added SBUS support.
	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
	* c/stuff.xs.pm: added wrapper for sbus.c interface.
	* sbus_probing/main.pm: initial revision (inspired from kudzu).

2000-05-27 Adam Lebsack <adam@mandrakesoft.com>

	* share/list.ppc: various PPC modifications, for HFS
	* partition_table_mac.pm: bug fixes
	* partition_table.pm: various HFS fixes, isHiddenMacPart()
	* diskdrake.pm: added HFS to top buttons when run on PPC
	* keyboard.pm: fixed name of mac-fr2-ext keymap
	* install_steps_gtk.pm: added Xpmac server support for PPC.
	* install_steps_interactive.pm: disallow hardware configuration on PPC for
	now.  All drivers should be in the kernel. setup_this_kind().
	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
	* fs.pm: fix argument for HFS formatting.	
	* Makefile: special installation of PPC files.

2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
	alpha|sparc.

2000-05-25  François Pons  <fpons@mandrakesoft.com>

	* silo.pm: added configure_entry to try creating an initrd for an image
	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
	* install2.pm: removed create boot disk and create auto install disk on
	sparc*. force writing of /etc/conf.modules for step setupBootloader.
	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
	* install_steps_interactive.pm: added missing $prefix for glob_. call
	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
	* modules.pm: updated alias for sparc*.
	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
	the very beginning.
	* printer.pm: fixed typo.
	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
	resolution for these server too.

2000-05-24  François Pons  <fpons@mandrakesoft.com>

	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
	* partition_table_sun.pm: fixed a bug when reading partition table
	with unused partition in the middle of the table.

2000-05-23  François Pons  <fpons@mandrakesoft.com>

	* common.pm: update arch to take into account sparc and sparc64. added
	better_arch and compat_arch function.
	* silo.pm: fixed adding new kernel automatically.
	* install2.pm: removed create boot disk stuff for sparc*.
	* install_steps.pm: added initrd generation for alpha. added ldconfig
	at end of installation. removed /usr/bin/dumpkeys existence test on
	sparc*, should be added in the future.
	* install_steps_interactive.pm: removed supermount for sparc*.
	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
	support for sparc*. removed screen limit of 1024x768.
	* detect_devices.pm: fixed problem on machine with really no IDE interface.
	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
	partition.
	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
	fixed correctSize and invCorrectSize to take back a linear approximation
	above 9Gb approximatively. removed ftp rewind as broken currently.
	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
	globing (removed) against existing '*'.
	* partition_table.pm: removed support for non SUN partition table, as it
	may freeze the kernel or may be blanked?
	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
	for permedia2 card (3DLabs server).
	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
	* Makefile: added support for modules and modules64 for sparc*.
	* c/stuff.xs.pm: added kernel_arch function for getting the current true
	architecture provided by the kernel (uname -m).

2000-05-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): the URL link to doc must
	be $lang/index.html, not only $lang.

	* standalone/mousedrake: add handling of XF86Config-4

	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)

2000-05-08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the touch of some files here to please linuxconf
	
	* install2.pm (miscellaneous): s/KBD/KEYBOARD/

	* lilo.pm (install_grub): don't keep symlinks for reiserfs
	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)

	* install_any.pm (getHds): default mount point for windobe in
	lowercased for StartOffice(!)

2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
	* keyboard.pm: Added new Lithuanian keyboard and changed the
	  string for brazilian ABNT-2 to state more clearly its ABNT nature
	  (it is not a standard PC keyboard; it uses some different keycodes)

2000-05-07  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): return availableCorrected
	instead of available

	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)

	* modules.pm (text2driver): same as text2lang below
	* keyboard.pm (text2keyboard): same as text2lang below
	* lang.pm (text2lang): replace the while (... each) by a foreach
	(keys) (because each is dangerous if loop is exited)

	* install_steps_interactive.pm (selectKeyboard): better handling
	of multiple langs question.

	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)

	* install_steps_interactive.pm (setup_thiskind): remove ide-*
	from modules displayed as loaded.

2000-05-06  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
	/usr) are not on not trueFS

	* any.pm (setupBootloader): add $prefix for the 2 glob_'s

2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua

2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* printerdrake.pm: fixed English error

2000-05-05  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): remove the special case
	for fbdev.

	* install_steps_interactive.pm (setup_thiskind): replace return by
	next in case load_module fails.

	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade

	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4

	* pkgs.pm (correctSize): updated for 7.1

	* install_any.pm (getAvailableSpace): move the removing of
	$minAvailableSize here.

2000-05-04  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (configurePrinter): give clicked to printerConfig

	* interactive.pm (ask_from_entries_ref): set default val if not_edit

	* interactive_newt.pm (ask_from_entries_refW): remove setting of
	default val. Now done in interactive::ask_from_entries_ref

	* interactive_gtk.pm (ask_from_entries_refW): handle empty value

	* modules.pm (read_already_loaded): ensure that already loaded
	modules are put in %loaded.
	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)

	* lilo.pm (install_lilo): truncate label's to 15 chars

	* install_any.pm (generate_ks_cfg): fix missing space
	* install_any.pm (generate_ks_cfg): fix bug for nfs comand

	* install2.pm: get rid of autoformat
	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat

2000-05-03  Pixel  <pixel@mandrakesoft.com>

	* any.pm (setupBootloader): replace ask_many_from_list by
	ask_from_list for bootloader choice

	* services.pm (drakxservices): stop immediately service if removed

	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
	* install_steps.pm (afterInstallPackages): touch some files to
	please linuxconf

2000-05-03  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: updated min size, fixed kppprc generation.
	* install_any.pm: make sure postinstall-rpm is here before
	erasing (avoid error on reboot only).

2000-05-02  Pixel  <pixel@mandrakesoft.com>

	* raid.pm (format_part): don't call raid::make if part is already
	formatted (as raidstop fails)

	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
	more	

	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
	fail a simple warning.

	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
	* share/MonitorsDB: take new one from RedHat

	* standalone/drakboot: added kfloppy

	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
	not to have it)

2000-05-01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): remove
	NIS_server, use NIS instead
	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead

	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): fix yet another bug for
	ttf from windobe handling

	* install_steps_interactive.pm (selectInstallClass): hide beginner
	mode in corporate. Display special help.

2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
	text to be properly aligned (reported by Craig Chang
	<craig_chang@taipei.siscomm.com.tw>)
	* common.pm: now that po handling is correct, I changed the order
	of reading variables so that it follows the standards ($LANGUAGE first)
	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251

2000-04-28  François Pons  <fpons@mandrakesoft.com>

	* install_steps*.pm: added support for selection of package during
	upgrade the same way it is done for installation. added check of
	minimal size, abort else (at least let the user know about :-)
	fixed crypto if no network interface available.
	* install2.pm: fixed problem during upgrade that lost network
	configuration.

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_raw): don't call commands::insmod, do it in
	place. Merge with load_multi

	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
	symlinking	

	* Xconfigurator.pm (cardConfiguration): load module agpgart for
	i810
	
	* install_any.pm (getHds): changed the mount point setting for
	windows partitions as device_windobe is not unique

2000-04-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): changed to adapt to
	new hidden format

	* install2.pm (@installSteps): changed the way hidden is handled.
	Now it is a true perl expression (great power now)

	* install_steps_gtk.pm (selectInstallClass1): update steps window
	before asking normal/devel/server. Nicer!

	* install_steps_interactive.pm (configureNetwork): when "Cancel"
	pressed at network interface configuration do not skip all
	configuration.	

2000-04-26  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm (pppConfig): modified a lot, removed template
	file for ifcfg and chat file.

2000-04-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
	the tree column (so that the checkbox are always visible without
	scrolling)	

	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
	to propose them in console
	
	* install_any.pm (relGetFile): added auto_inst to files to get
	from Mandrake/base

	* install2.pm (main): changed auto_inst behaviour

	* standalone/adduserdrake: fix a bug (s/$o/$in/g)

	* interactive_newt.pm (ask_from_entries_refW): now handling
	complete/changed/focus_out callbacks (at least more than before)	

	* Newt/Newt.xs: added rough callback handling

2000-04-25  François Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added support for PPA more easily, allow
	printers entry using ppa driver event if pnm2ppa not installed,
	install it if neccessary after.
	* network.pm, install_steps.pm, install_steps_interactive.pm:
	added support for stoping a network interface, usefull for ppp0 to
	avoid using it too long.
	* install_steps.pm: fixed missing local on pap_secrets file.

2000-04-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install): moved the generation of the keytable here. It
	is used by both lilo & grub (lilo is not always installed as was
	assumed)	

	* common.pm (formatAlaTeX): remove bounding spaces

	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
	mark 25 in beginner
	* install_steps_interactive.pm (choosePackages): set $min_mark to
	25 in beginner

2000-04-24  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setupXfree): add a yesorno
	question for choosing between XF4 and XF3 in expert

	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window

	* install_any.pm (update_userkderc): make sure uid and gid are kept

	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert

	* partition_table.pm (add_extended): handle a 3rd arg,
	$extended_type to tell which kind of extended partition is wanted
	* partition_table.pm (adjust_main_extended): in non-expert,
	automatically set extended to linux-extended if there's only
	linux-type partitions.	

2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>

	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
	  and not for byte. RAM is expressed in megabytes -> MB

2000-04-19  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
	* printer.pm: fixed wrong prototype of print_pages.
	* install2.pm: set version to 7.1 for crypto stuff.
	* crypto.pm: commented ackbar crypto site.

2000-04-17  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
	linuxconf)	

2000-04-14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): don't
	ask about checking bad blocks for reiserfs, cuz not handled

	* fs.pm (mount): reiserfs handling
	* fs.pm (format_reiserfs): added
	* fs.pm (write_fstab): add option "notail" for reiserfs if
	the partition holds the kernel (/boot or /)

	* partition_table.pm (isTrueFS): added, replaces most occurences
	of isExt2

2000-04-12  François Pons  <fpons@mandrakesoft.com>

	* install2.pm: force installation step if package have been
	selected on step choose packages.
	* install_any.pm: protected against die in perl (setstep or
	theme_changed).

2000-04-11  François Pons  <fpons@mandrakesoft.com>

	* resize_fat: added some limits verification.
	* interactive_gtk.pm: corrected swap of arg with help adding.

2000-04-10  François Pons  <fpons@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
	which is used by printerdrake only. drops key bindings.

2000-04-07  François Pons  <fpons@mandrakesoft.com>

	* tools/serial_probe: obsoleting pnp_serial which is now replaced
	by this one, taken from kudzu, really faster and probe all serial
	devices at one time. modified to probe correctly modem :-)
	* mouse.pm: updated to use serial_probe interface of
	detect_devices.pm.
	* detect_devices.pm: modified to use serial_probe, cache probed
	devices to avoid reprobing.

2000-04-06  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps.pm: added support
	for peerdns options of ppp, so removed dns address unless expert.

2000-04-05  François Pons  <fpons@mandrakesoft.com>

	* crypto.pm, install_steps_interactive.pm, install2.pm,
	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
	and depslist-crypto. dependancies are not supported but with a
	simpler format of depslist file where closure are not done and
	only package name are used for dependancies.
	* pkgs.pm: added better support for multi CD manipulation,
	including selection and refus.

2000-04-04  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: modified selection packages from compssList by
	incremental selection, much more quickly.
	added selected medium for selecting a package.
	* install_any.pm: refused media hash transfered to selected value
	of media table.
	@needToCopy list should only have package of default medium.

2000-04-03  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha

2000-03-31  François Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: made changeMedium sub modification
	permanent.
	* pkgs.pm: modified upgrade to avoid use of header.

2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: some more choices for PPC keyboards

2000-03-30  François Pons  <fpons@mandrakesoft.com>

	* install2pm: added eval around loading af_packet and postinstall
	copy of RPMS.
	* devices.pm: added /dev/kdb for SPARC.
	* install_any.pm: modified multi CD management, postinstall copy
	of RPMS.
	* install_steps_gtk.pm: added support for Xsun server for SPARC.
	* install_steps_interactive.pm: added multi CD dialog box for
	selecting CD available. Serialized ethernet configuration and ppp
	configuration.
	* pkgs.pm: added check for infinite recursion for bad depslist.
	* printer.pm: better test for reparse of printerdb.
	* Xconfigurator.pm: added support for Xsun server for SPARC.

2000-03-30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection

2000-03-29  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (wait_messageW): add some padding (nicer)

	* install_steps_interactive.pm (generateAutoInstFloppy): created,
	creates a floppy for auto installs.

	* install_any.pm (generate_ks_cfg): created, generates stage1
	ks.cfg file

	* share/po/DrakX.pot: added special comment for grub entry

2000-03-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): sort langs for
	many-lang install

	* mouse.pm (write): add WHEEL telling if a wheel mouse is there

2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added entries for all three Armenian keyboards

2000-03-26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (install_urpmi): full support for multi-hdlist's	

	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
	$prefix/var/lib/urpmi
	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
	fake name. Access via /tmp/$hdlist is given for non-fake name

	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)

2000-03-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm: updated to the new format of entries. It was an hash.
	Now the key is field kernel_or_dev, and entries is an array.
	
	(get): added, it returns the entry using a kernel
	   (needed because entries is no more a hash)

	* install_steps_interactive.pm (setupLILO): adapted to the new format

	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	

	* fsedit.pm (suggest_part): if suggested part contains a field
	"hd", ensure the partition is created on this hard drive

	* install2.pm (main): before leaving installation, remove
	/var/lib/urpmi if urpmi not installed	

	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
	of $size

2000-03-24  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
	(ultra66) without rebooting and making special floppy :)

	* lilo.pm (install_grub): much better grub configuration (better
	than lilo's :pp)

	* install_steps.pm (setupBootloaderBefore): remove entry floppy
	for security > 3

2000-03-23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): added, takes care of telling
	the X server if the user changed the mouse type. Only done if
	a serial mouse is chosen.

	* install_steps_newt.pm (doPartitionDisks): add a call to

	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
	devfs (it looses the symlink /dev/mouse)

2000-03-22  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry

2000-03-20  François Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, fs.pm, install_any.pm: added supports for
	LS-120 floppy drive and icons on desktop of KDE (untested).
	* printer.pm, printerdrake.pm: added supports for PPA interface in
	new rhs-printfilters, always enable "Print text as postscript"
	option for such printers.

2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: changed XKB name for Swedish keyboard
	  changed XKB names for Russian and German keyboards
	  added a choice for "Croatian" keyboard
	* share/compss{,List}: added various new locales-*, ispell-* 
	  and netscape-* files. changed ppa to pnm2ppa.

2000-03-17  François Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added setup for all configured queue.
	* install_steps_interactive.pm: modified for retrieving packages
	or current configuration.
	* printer.pm: correction, tested retrieve of printer
	configuration without printtool comments in printcap file: added
	update of entry according to gsdriver used (untested again).
	* printerdrake.pm: better handling of cancel, manage of multiple
	queue definition together (as lp|My printer).

2000-03-16  François Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: moved in printerdrake.pm the test
	of printer usage.
	* printerdrake.pm: heavy modification to handle multiple queue,
	corrected some bugs too, added much more features as printtool.
	* printer.pm: added more features for filter, allow printer to be
	retrieved without help of printtool id in printcap file (untested).

2000-03-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Loopback): handling of the file loopback: test
	existence of the file and take its size.

2000-03-14  François Pons  <fpons@mandrakesoft.com>

	* install_any.pm: corrected for duplicate file on other CD.

2000-03-13  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (floppies): don't return hash but the device name

2000-03-13  François Pons  <fpons@mandrakesoft.com>

	* pkgs.pm, install_any.pm: small correction for multiple media
	installation.
	* tools/syncrpms: added for handling synchronisation of multiple source
	rpm directories (and multiple target), include cleaning.
	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
	after normal packages installation (printer, network, X11...), may
	be used to duplicate on other CD some important stuff of the first
	one.

2000-03-12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): compute the
	max_size very simply (sum of all package sizes), otherwise too costly

	* pkgs.pm (install): call cleanHeaders at the end
	* pkgs.pm (cleanHeaders): created

	* install2.pm (miscellaneous): /etc/msec/init.sh is now
	/usr/sbin/msec (yoann thanks for not telling :pp)

	* pkgs.pm (install): remove the $prefix of mountpoints for not
	enough room to install error message

2000-03-11  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_create_window): add callback on focus to
	ensure_focus. The result is no more 3 focus states with 2 buttons.

	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling

	* raid.pm (make): check the result of mkraid. Suggest raidtools
	are missing in standalone diskdrake

	* devices.pm (set_loop): created, searches for an available
	loopback and sets the file to it

	* lilo.pm (dev2grub): fixed a missing slash

	* interactive_gtk.pm (wait_message_nextW): do not update if same
	message, otherwise silly gtk won't do anything and we'll wait
	forever :(

2000-03-10  François Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account multiple media
	installation.

2000-03-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (@install_classes): cleanup, no more i18n (is now in
	install_steps_interactive), remove old entries

2000-03-09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): don't add alias block-major-11 in every case
	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)

	* fs.pm (format_*): move the @options before the device

	* loopback.pm: created, added a lot of stuff for loopback in
	diskdrake.pm, fs.pm...

2000-03-08  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: %type2fs replaced ox402 by 0x402

	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")

	* install_any.pm (install_urpmi): update for new hdlist.cz2

2000-03-07  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/

	* install_steps_interactive.pm (addUser): force add a normal user
	for security 4

2000-03-05  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
	(tis the Gtk-Perl 0.7002 was of doing)

2000-03-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): add ide-floppy to the modprobes of
	post-install supermount

2000-03-03  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (ps): add RSS to ps command

2000-03-02 Adam Lebsack <adam@mandrakesoft.com>

	* mouse.pm: added mac mouse detection to mouse::detect.
	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.

2000-03-01  François Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account smaller
	transaction during installation.
	still a lot of test to perform, no provides updated currently and
	building of hdlist.cz2 and depslist.ordered need old files...
	nothing done for hdlist.gz during post installation, but
	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
	installation of packages as extract_archive need a true file].

2000-03-01  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install_grub): creation

	* network.pm (write_interface_conf): ONBOOT = !pcmcia

	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler

2000-02-29  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: moved common network stuff from "net" to "network"
	(modules like nfs lockd...)

	* fs.pm (write_fstab): moved the sort to the right place

	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
	set LANGUAGE=C before

	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
	be a decimal value :)

	* install_steps_gtk.pm (create_logo_window): set_name logo for
	logo window
	* share/install.rc: force disabling of background image theme

	* install_steps_gtk.pm (enteringStep): add step information for
	console 1

	* any.pm (addKdmIcon): new function
	* install_steps.pm (addUser): handle field icon
	* install_steps_interactive.pm (addUser): add choice of kdm icon
	* standalone/adduserdrake: add choice of kdm icon

	* diskdrake.pm (ask_all_data...): change for easier i18n

	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
	(need cleaning?)
	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
	option in expert
	* install2.pm (miscellaneous): add CLEAN_TMP option for
	/etc/sysconfig/system	

	* install_steps_interactive.pm (miscellaneous): forbidden
	useSupermount if high security.	

	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)

2000-02-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
	800x600.	

	* partition_table_raw.pm (get_geometry): when the
	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave

	* install2.pm (main): use modules::load_multi to increase boot
	start time

	* modules.pm (load_multi): added this function for loading many
	modules at once.

	* install_steps_gtk.pm (new): increase time before timeout

	* detect_devices.pm (cdroms): change the device associated with
	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	

	* modules.pm (write_conf): sort scsi_hostadapter's

2000-02-27  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): load ide-probe and the like in 'prereq' type
	so no aliases are added to conf.modules

2000-02-25  Pixel  <pixel@mandrakesoft.com>

	* devices.pm (make): small code cleanup

	* partition_table_raw.pm (adjustEnd): more explicit error message

	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
	big after each allocation) making adjustEnd cry

2000-02-24  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (new): added the "new" method to initialize
	windowheight for isStandalone

	* install_steps_gtk.pm (new): returns undef in case no X server
	works	

	* install2.pm (main): moved the ejectCdrom from install_steps::END
	to here
	* install2.pm (main): fix the $SIG{SEGV} handler
	* install2.pm (main): added a "try again" in text install if the
	"new" fails

	* install_steps_interactive.pm (createBootdisk): fix an error for
	non fdX choice of floppy drive
	
	* install_steps_interactive.pm (setup_thiskind): remove the
	"defined @l"

2000-02-23  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (%suggestedPartitions): remove any /boot entries
	* install2.pm (selectInstallClass): removed the special code to
	/boot entries from suggestedPartitions for on non-intel (and it
	was buggy :)
	* fsedit.pm (@suggestions): remove the /boot entry
	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
	* fsedit.pm (suggest_part): remove the 1024 cylinder special case

	* install_steps_interactive.pm (setupLILO): replace linear option
	by lba32

	* lilo.pm (suggest): add lba32 by default

	* install_steps_interactive.pm (load_thiskind): moved the HPT
	stuff to install_any::ultra66 and call it.
	Add sound card configuration (3 lines :)

	* my_gtk.pm and interactive_gtk: resize the list and tree based on
	root window size

	* install_steps_gtk: $width and $height goes $::rootwidth and
	$::rootheight, also other dimensions goes global (main::)

	* commands.pm (strings): replace the typo \{$n,} by {$n,}

2000-02-23  François Pons  <fpons@mandrakesoft.com>

	* build_archive, extract_archive: changed format of TOC to speed
	up extraction of archive, now 5 to 6 times faster to read TOC :-)
	
2000-02-22  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: load "Cards" database only to translate NAME
	to fields. Added file CardsNames created from Cards using
	share/Cards2CardsNames. Kind of list of normalized NAMEs	

	* MonitorsDB: replace the ` ' separator for vendor by `|'

	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	

	* interactive_gtk.pm (ask_from_treelist): creation of
	ask_from_treelist. Usage is just the same as ask_from_list with
	one more argument (the separator eg: |, /)

2000-02-21  François Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed deadlock while trying to create partition
	when available space is equal or less than 2 cylinders. fixed
	Create action on corrupted partition by removing stalling window.
	Blocked partition table writing if there are error by forcing user
	to correct partition table.
	* partition_table.pm: fixed typo in verifyParts with cdie, added
	verifyParts on Resize action.
	
2000-02-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_big_help): display the help in full
	screen	

	* my_gtk.pm (_create_window): add big help on F1

	* common.pm (add2hash): now returns the first parameter

	* mouse.pm (detect): really defaults to serial mouse

	* interactive.pm: add ask_many_from_list_with_help and
	ask_many_from_list_with_help_ref

	* services.pm: creation, it handles what was in
	standalone/drakxservices

2000-02-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
	"/dev/psaux" and not "psaux")

	* diskdrake.pm (Create): show start sector even for non-expert on
	non-i386

2000-02-16  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): add defaults to serial mouse

	* install_steps_gtk.pm (createXconf): remove the defaults to
	serial mouse

2000-02-15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: "After %s partition %s," inlined otherwise does
	not please pablo and translators...

2000-02-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): hide start sector choice for non-expert

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm (get_geometry): do not use the cylinder
	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
	the total_sectors using HDIO_GET_IDENTITY

	* c/stuff.xs.pm: added total_sectors (gives the number of sector
	of a drive)

	* modules.pm (load): ignore error in loading prereq's
	
	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
	z85230 added

	* commands.pm (mount): add modules::load_deps otherwise the
	fs::mount won't succeed insmoding vfat if needed

2000-02-11  François Pons  <fpons@mandrakesoft.com>

	* fixed diskdrake to handle limit case when creating and resizing
	partition table, address size limit and start sector limit.

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): add a callback on SEGV
	-> message printed
	-> that way, ENDs are called (otherwise skipped)

	* install_steps_interactive.pm (setup_thiskind): handles the undef
	value returned by load_thiskind
	
	* install_steps_interactive.pm (exitInstall): do not call
	install_steps::exitInstall

	* install_steps (exitInstall): removed
	* install_steps (END): added (it does ejectCdrom)

	* install_steps_interactive.pm (load_thiskind): returns undef if
	error loading a module

	* fs.pm (format_part): changed the prototype from $;$@ to $;@
	otherwise, @options always have a value (mostly undef) and mkdosfs
	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)

	* install_steps_interactive.pm (setup_thiskind):
	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
	(that way no pci probe the second time)

2000-02-10  François Pons  <fpons@mandrakesoft.com>

	* heavy modification of build_archive and extract_archive to manage
	a TOC directly in archive file, handle bzip2 or gzip compression,
	extract_archive can extract multiple files a time, with minimal
	invocation of uncompress program and follow symlink and expand
	directory contents.
	* use build_archive/extract_archive for locales.
	* fixed a min/max in install_steps_gtk for Resize/Create partition.
	* fixed adjustEnd with dos partition table, take care of magic 63
	sectors at beginning of partitions, a more solid method should be
	used for that.

2000-02-10  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"

2000-02-09  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (add): cdie if maximum number of partitions
	handled by linux is reached

	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
	card or server found

	* install_any.pm (relGetFile): for mdkinst files, take care not to
	have a double '/' (see debbugs #591)

	* install_steps_interactive.pm (configureNetwork):
	purpose: add ability to configure both modem and lan
	         clean up the behaviour

	* fs.pm (write_fstab): 
	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
	also: rewrite of the part writing the fstab.