# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2004-01-17 16:46+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8-bit\n"
#: ../move/move.pm:359
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:369
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:380
#, c-format
msgid "Need a key to save your data"
msgstr ""
#: ../move/move.pm:382
#, c-format
msgid "Detect USB key again"
msgstr ""
#: ../move/move.pm:383 ../move/move.pm:413
#, c-format
msgid "Continue without USB key"
msgstr ""
#: ../move/move.pm:394 ../move/move.pm:408
#, c-format
msgid "Key isn't writable"
msgstr ""
#: ../move/move.pm:396
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
#: ../move/move.pm:402 help.pm:414 install_steps_interactive.pm:1304
#, c-format
msgid "Reboot"
msgstr ""
#: ../move/move.pm:410
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:412
#, c-format
msgid "Retry"
msgstr ""
#: ../move/move.pm:423
#, c-format
msgid "Setting up USB key"
msgstr ""
#: ../move/move.pm:423
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
#: ../move/move.pm:445
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
#: ../move/move.pm:455
#, c-format
msgid "Auto configuration"
msgstr ""
#: ../move/move.pm:455
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr ""
#: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563 ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117 diskdrake/interactive.pm:214 diskdrake/interactive.pm:227 diskdrake/interactive.pm:366 diskdrake/interactive.pm:381 diskdrake/interactive.pm:502 diskdrake/interactive.pm:507 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:252 install_steps.pm:77 install_steps_interactive.pm:40 interactive/http.pm:118 interactive/http.pm:119 standalone/drakTermServ:403 standalone/drakTermServ:755 standalone/drakTermServ:767 standalone/drakTermServ:953 standalone/drakTermServ:1338 standalone/drakTermServ:1343 standalone/drakTermServ:1354 standalone/drakTermServ:1373 standalone/drakauth:36 standalone/drakbackup:766 standalone/drakbackup:879 standalone/drakbackup:1476 standalone/drakbackup:1507 standalone/drakbackup:1988 standalone/drakbackup:2160 standalone/drakbackup:2714 standalone/drakbackup:2781 standalone/drakbackup:4763 standalone/drakboot:225 standalone/drakbug:267 standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:478 standalone/drakfloppy:301 standalone/drakfloppy:305 standalone/drakfloppy:311 standalone/drakfont:211 standalone/drakfont:224 standalone/drakfont:262 standalone/drakfont:602 standalone/draksplash:21 standalone/logdrake:171 wizards.pm:94 wizards.pm:98 wizards.pm:120
#, c-format
msgid "Error"
msgstr ""
#: ../move/move.pm:503 install_steps.pm:78
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
#: ../move/move.pm:559 install_steps_interactive.pm:40
#, c-format
msgid "An error occurred"
msgstr ""
#: ../move/move.pm:565
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:580
#, c-format
msgid "Remove system config files"
msgstr ""
#: ../move/move.pm:581
#, c-format
msgid "Simply reboot"
msgstr ""
#: ../move/tree/mdk_totem:60
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:81
#, c-format
msgid "Kill those programs"
msgstr ""
#: ../move/tree/mdk_totem:82
#, c-format
msgid "No CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:87
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:16
#, c-format
msgid "256 kB"
msgstr ""
#: Xconfig/card.pm:17
#, c-format
msgid "512 kB"
msgstr ""
#: Xconfig/card.pm:18
#, c-format
msgid "1 MB"
msgstr ""
#: Xconfig/card.pm:19
#, c-format
msgid "2 MB"
msgstr ""
#: Xconfig/card.pm:20
#, c-format
msgid "4 MB"
msgstr ""
#: Xconfig/card.pm:21
#, c-format
msgid "8 MB"
msgstr ""
#: Xconfig/card.pm:22
#, c-format
msgid "16 MB"
msgstr ""
#: Xconfig/card.pm:23
#, c-format
msgid "32 MB"
msgstr ""
#: Xconfig/card.pm:24
#, c-format
msgid "64 MB or more"
msgstr ""
#: Xconfig/card.pm:211
#, c-format
msgid "X server"
msgstr ""
#: Xconfig/card.pm:212
#, c-format
msgid "Choose an X server"
msgstr ""
#: Xconfig/card.pm:244
#, c-format
msgid "Multi-head configuration"
msgstr ""
#: Xconfig/card.pm:245
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
#: Xconfig/card.pm:316
#, c-format
msgid "Select the memory size of your graphics card"
msgstr ""
#: Xconfig/card.pm:387
#, c-format
msgid "XFree configuration"
msgstr ""
#: Xconfig/card.pm:389
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr ""
#: Xconfig/card.pm:423
#, c-format
msgid "Configure all heads independently"
msgstr ""
#: Xconfig/card.pm:424
#, c-format
msgid "Use Xinerama extension"
msgstr ""
#: Xconfig/card.pm:429
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr ""
#: Xconfig/card.pm:443 Xconfig/card.pm:445 Xconfig/various.pm:23
#, c-format
msgid "XFree %s"
msgstr ""
#: Xconfig/card.pm:456 Xconfig/card.pm:482 Xconfig/various.pm:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr ""
#: Xconfig/card.pm:459
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
#: Xconfig/card.pm:461 Xconfig/card.pm:484
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
#: Xconfig/card.pm:469 Xconfig/card.pm:490
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""
#: Xconfig/card.pm:472
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
#: Xconfig/card.pm:475 Xconfig/card.pm:492
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
#: Xconfig/card.pm:498
#, c-format
msgid "Xpmac (installation display driver)"
msgstr ""
#: Xconfig/main.pm:78 Xconfig/main.pm:79 Xconfig/monitor.pm:106 any.pm:816
#, c-format
msgid "Custom"
msgstr ""
#: Xconfig/main.pm:103 diskdrake/dav.pm:28 install_steps_interactive.pm:87 printer/printerdrake.pm:3852 standalone/draksplash:114 standalone/harddrake2:187 standalone/logdrake:176 standalone/scannerdrake:432
#, c-format
msgid "Quit"
msgstr ""
#: Xconfig/main.pm:105
#, c-format
msgid "Graphic Card"
msgstr ""
#: Xconfig/main.pm:108 Xconfig/monitor.pm:100
#, c-format
msgid "Monitor"
msgstr ""
#: Xconfig/main.pm:111 Xconfig/resolution_and_depth.pm:228
#, c-format
msgid "Resolution"
msgstr ""
#: Xconfig/main.pm:116
#, c-format
msgid "Test"
msgstr ""
#: Xconfig/main.pm:121 diskdrake/dav.pm:67 diskdrake/interactive.pm:407 diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80 standalone/drakfont:496 standalone/drakfont:556 standalone/harddrake2:185
#, c-format
msgid "Options"
msgstr ""
#: Xconfig/main.pm:166
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
#: Xconfig/monitor.pm:101
#, c-format
msgid "Choose a monitor"
msgstr ""
#: Xconfig/monitor.pm:107
#, c-format
msgid "Plug'n Play"
msgstr ""
#: Xconfig/monitor.pm:108 mouse.pm:47
#, c-format
msgid "Generic"
msgstr ""
#: Xconfig/monitor.pm:109 standalone/drakconnect:432 standalone/harddrake2:68 standalone/harddrake2:69
#, c-format
msgid "Vendor"
msgstr ""
#: Xconfig/monitor.pm:119
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
#: Xconfig/monitor.pm:124
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
#: Xconfig/monitor.pm:131
#, c-format
msgid "Horizontal refresh rate"
msgstr ""
#: Xconfig/monitor.pm:132
#, c-format
msgid "Vertical refresh rate"
msgstr ""
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr ""
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr ""
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr ""
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr ""
#: Xconfig/resolution_and_depth.pm:16
#, c-format
msgid "4 billion colors (32 bits)"
msgstr ""
#: Xconfig/resolution_and_depth.pm:141
#, c-format
msgid "Resolutions"
msgstr ""
#: Xconfig/resolution_and_depth.pm:275
#, c-format
msgid "Choose the resolution and the color depth"
msgstr ""
#: Xconfig/resolution_and_depth.pm:276
#, c-format
msgid "Graphics card: %s"
msgstr ""
#: Xconfig/resolution_and_depth.pm:289 interactive.pm:403 interactive/gtk.pm:761 interactive/http.pm:103 interactive/http.pm:157 interactive/newt.pm:300 interactive/newt.pm:402 interactive/stdio.pm:39 interactive/stdio.pm:143 interactive/stdio.pm:144 interactive/stdio.pm:173 standalone/drakbackup:4257 standalone/drakbackup:4289 standalone/drakbackup:4382 standalone/drakbackup:4399 standalone/drakbackup:4500 standalone/drakconnect:168 standalone/drakconnect:636 standalone/drakconnect:723 standalone/drakconnect:866 standalone/drakups:194 standalone/mousedrake:77 standalone/net_monitor:308 ugtk2.pm:396 ugtk2.pm:494 ugtk2.pm:1044 ugtk2.pm:1067
#, c-format
msgid "Ok"
msgstr ""
#: Xconfig/resolution_and_depth.pm:289 any.pm:857 diskdrake/smbnfs_gtk.pm:81 help.pm:192 help.pm:453 install_steps_gtk.pm:500 install_steps_interactive.pm:783 interactive.pm:404 interactive/gtk.pm:765 interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:299 interactive/newt.pm:406 interactive/stdio.pm:39 interactive/stdio.pm:143 interactive/stdio.pm:177 printer/printerdrake.pm:2906 standalone/drakautoinst:200 standalone/drakbackup:4221 standalone/drakbackup:4248 standalone/drakbackup:4273 standalone/drakbackup:4306 standalone/drakbackup:4332 standalone/drakbackup:4358 standalone/drakbackup:4415 standalone/drakbackup:4441 standalone/drakbackup:4471 standalone/drakbackup:4495 standalone/drakconnect:167 standalone/drakconnect:721 standalone/drakconnect:875 standalone/drakfont:662 standalone/drakfont:739 standalone/drakups:201 standalone/logdrake:176 standalone/mousedrake:76 standalone/net_monitor:304 ugtk2.pm:390 ugtk2.pm:492 ugtk2.pm:501 ugtk2.pm:1044
#, c-format
msgid "Cancel"
msgstr ""
#: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154 install_steps_gtk.pm:278 install_steps_gtk.pm:685 interactive.pm:498 interactive/gtk.pm:652 interactive/gtk.pm:654 standalone/drakTermServ:321 standalone/drakbackup:4218 standalone/drakbackup:4245 standalone/drakbackup:4270 standalone/drakbackup:4303 standalone/drakbackup:4329 standalone/drakbackup:4355 standalone/drakbackup:4396 standalone/drakbackup:4412 standalone/drakbackup:4438 standalone/drakbackup:4467 standalone/drakbackup:4492 standalone/drakbackup:4517 standalone/drakbug:157 standalone/drakconnect:163 standalone/drakconnect:223 standalone/drakfont:514 standalone/drakperm:134 standalone/draksec:282 standalone/harddrake2:186 ugtk2.pm:1152 ugtk2.pm:1153
#, c-format
msgid "Help"
msgstr ""
#: Xconfig/test.pm:29
#, c-format
msgid "Test of the configuration"
msgstr ""
#: Xconfig/test.pm:30
#, c-format
msgid "Do you want to test the configuration?"
msgstr ""
#: Xconfig/test.pm:30
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
#: Xconfig/test.pm:70
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
#: Xconfig/test.pm:148
#, c-format
msgid "Leaving in %d seconds"
msgstr ""
#: Xconfig/test.pm:148
#, c-format
msgid "Is this the correct setting?"
msgstr ""
#: Xconfig/various.pm:29
#, c-format
msgid ""
"Keyboard layout: %s\n"
""
msgstr ""
#: Xconfig/various.pm:30
#, c-format
msgid ""
"Mouse type: %s\n"
""
msgstr ""
#: Xconfig/various.pm:31
#, c-format
msgid ""
"Mouse device: %s\n"
""
msgstr ""
#: Xconfig/various.pm:32
#, c-format
msgid ""
"Monitor: %s\n"
""
msgstr ""
#: Xconfig/various.pm:33
#, c-format
msgid ""
"Monitor HorizSync: %s\n"
""
msgstr ""
#: Xconfig/various.pm:34
#, c-format
msgid ""
"Monitor VertRefresh: %s\n"
""
msgstr ""
#: Xconfig/various.pm:35
#, c-format
msgid ""
"Graphics card: %s\n"
""
msgstr ""
#: Xconfig/various.pm:36
#, c-format
msgid ""
"Graphics memory: %s kB\n"
""
msgstr ""
#: Xconfig/various.pm:38
#, c-format
msgid ""
"Color depth: %s\n"
""
msgstr ""
#: Xconfig/various.pm:39
#, c-format
msgid ""
"Resolution: %s\n"
""
msgstr ""
#: Xconfig/various.pm:41
#, c-format
msgid ""
"XFree86 server: %s\n"
""
msgstr ""
#: Xconfig/various.pm:42
#, c-format
msgid ""
"XFree86 driver: %s\n"
""
msgstr ""
#: Xconfig/various.pm:71
#, c-format
msgid "Graphical interface at startup"
msgstr ""
#: Xconfig/various.pm:73
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface (XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
#: Xconfig/various.pm:86
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:98
#, c-format
msgid "What norm is your TV using?"
msgstr ""
#: any.pm:98 harddrake/sound.pm:147 interactive.pm:441 standalone/drakbug:259 standalone/drakconnect:170 standalone/drakups:90 standalone/drakxtv:90 standalone/harddrake2:133 standalone/service_harddrake:94
#, c-format
msgid "Please wait"
msgstr ""
#: any.pm:98
#, c-format
msgid "Bootloader installation in progress"
msgstr ""
#: any.pm:137
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
#: any.pm:160 any.pm:192
#, c-format
msgid "First sector of drive (MBR)"
msgstr ""
#: any.pm:161
#, c-format
msgid "First sector of the root partition"
msgstr ""
#: any.pm:163
#, c-format
msgid "On Floppy"
msgstr ""
#: any.pm:165 help.pm:729 printer/printerdrake.pm:3224
#, c-format
msgid "Skip"
msgstr ""
#: any.pm:170
#, c-format
msgid "SILO Installation"
msgstr ""
#: any.pm:170
#, c-format
msgid "LILO/grub Installation"
msgstr ""
#: any.pm:171
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr ""
#: any.pm:192
#, c-format
msgid "First sector of boot partition"
msgstr ""
#: any.pm:205 any.pm:240
#, c-format
msgid "Bootloader main options"
msgstr ""
#: any.pm:206
#, c-format
msgid "Boot Style Configuration"
msgstr ""
#: any.pm:209 any.pm:243 help.pm:729
#, c-format
msgid "Bootloader to use"
msgstr ""
#: any.pm:211
#, c-format
msgid "Bootloader installation"
msgstr ""
#: any.pm:213 any.pm:245 help.pm:729
#, c-format
msgid "Boot device"
msgstr ""
#: any.pm:214
#, c-format
msgid "Compact"
msgstr ""
#: any.pm:214
#, c-format
msgid "compact"
msgstr ""
#: any.pm:215 any.pm:294
#, c-format
msgid "Video mode"
msgstr ""
#: any.pm:217
#, c-format
msgid "Delay before booting default image"
msgstr ""
#: any.pm:218
#, c-format
msgid "Enable ACPI"
msgstr ""
#: any.pm:219
#, c-format
msgid "Force No APIC"
msgstr ""
#: any.pm:221 any.pm:552 diskdrake/smbnfs_gtk.pm:180 install_steps_interactive.pm:1160 network/netconnect.pm:500 printer/printerdrake.pm:1331 printer/printerdrake.pm:1445 standalone/drakbackup:1974 standalone/drakbackup:3826 standalone/drakconnect:818 standalone/drakconnect:846 standalone/drakups:278
#, c-format
msgid "Password"
msgstr ""
#: any.pm:222 any.pm:553 install_steps_interactive.pm:1161
#, c-format
msgid "Password (again)"
msgstr ""
#: any.pm:223
#, c-format
msgid "Restrict command line options"
msgstr ""
#: any.pm:223
#, c-format
msgid "restrict"
msgstr ""
#: any.pm:225
#, c-format
msgid "Clean /tmp at each boot"
msgstr ""
#: any.pm:226
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr ""
#: any.pm:228
#, c-format
msgid "Enable multiple profiles"
msgstr ""
#: any.pm:232
#, c-format
msgid "Give the ram size in MB"
msgstr ""
#: any.pm:234
#, c-format
msgid "Option ``Restrict command line options'' is of no use without a password"
msgstr ""
#: any.pm:235 any.pm:525 install_steps_interactive.pm:1155
#, c-format
msgid "The passwords do not match"
msgstr ""
#: any.pm:235 any.pm:525 diskdrake/interactive.pm:1249 install_steps_interactive.pm:1155
#, c-format
msgid "Please try again"
msgstr ""
#: any.pm:244
#, c-format
msgid "Init Message"
msgstr ""
#: any.pm:246
#, c-format
msgid "Open Firmware Delay"
msgstr ""
#: any.pm:247
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""
#: any.pm:248
#, c-format
msgid "Enable CD Boot?"
msgstr ""
#: any.pm:249
#, c-format
msgid "Enable OF Boot?"
msgstr ""
#: any.pm:250
#, c-format
msgid "Default OS?"
msgstr ""
#: any.pm:290
#, c-format
msgid "Image"
msgstr ""
#: any.pm:291 any.pm:302
#, c-format
msgid "Root"
msgstr ""
#: any.pm:292 any.pm:320
#, c-format
msgid "Append"
msgstr ""
#: any.pm:296
#, c-format
msgid "Initrd"
msgstr ""
#: any.pm:297
#, c-format
msgid "Read-write"
msgstr ""
#: any.pm:304
#, c-format
msgid "Table"
msgstr ""
#: any.pm:305
#, c-format
msgid "Unsafe"
msgstr ""
#: any.pm:312 any.pm:317 any.pm:319
#, c-format
msgid "Label"
msgstr ""
#: any.pm:314 any.pm:324 harddrake/v4l.pm:236 standalone/drakfloppy:88 standalone/drakfloppy:94
#, c-format
msgid "Default"
msgstr ""
#: any.pm:321
#, c-format
msgid "Initrd-size"
msgstr ""
#: any.pm:323
#, c-format
msgid "NoVideo"
msgstr ""
#: any.pm:334
#, c-format
msgid "Empty label not allowed"
msgstr ""
#: any.pm:335
#, c-format
msgid "You must specify a kernel image"
msgstr ""
#: any.pm:335
#, c-format
msgid "You must specify a root partition"
msgstr ""
#: any.pm:336
#, c-format
msgid "This label is already used"
msgstr ""
#: any.pm:348
#, c-format
msgid "Which type of entry do you want to add?"
msgstr ""
#: any.pm:349 standalone/drakbackup:1888
#, c-format
msgid "Linux"
msgstr ""
#: any.pm:349
#, c-format
msgid "Other OS (SunOS...)"
msgstr ""
#: any.pm:350
#, c-format
msgid "Other OS (MacOS...)"
msgstr ""
#: any.pm:350
#, c-format
msgid "Other OS (windows...)"
msgstr ""
#: any.pm:378
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
#: any.pm:510
#, c-format
msgid "access to X programs"
msgstr ""
#: any.pm:511
#, c-format
msgid "access to rpm tools"
msgstr ""
#: any.pm:512
#, c-format
msgid "allow \"su\""
msgstr ""
#: any.pm:513
#, c-format
msgid "access to administrative files"
msgstr ""
#: any.pm:514
#, c-format
msgid "access to network tools"
msgstr ""
#: any.pm:515
#, c-format
msgid "access to compilation tools"
msgstr ""
#: any.pm:521
#, c-format
msgid "(already added %s)"
msgstr ""
#: any.pm:526
#, c-format
msgid "This password is too simple"
msgstr ""
#: any.pm:527
#, c-format
msgid "Please give a user name"
msgstr ""
#: any.pm:528
#, c-format
msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
#: any.pm:529
#, c-format
msgid "The user name is too long"
msgstr ""
#: any.pm:530
#, c-format
msgid "This user name has already been added"
msgstr ""
#: any.pm:534
#, c-format
msgid "Add user"
msgstr ""
#: any.pm:535
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
#: any.pm:538 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158 diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:534 interactive/http.pm:152 printer/printerdrake.pm:160 printer/printerdrake.pm:347 printer/printerdrake.pm:3852 standalone/drakbackup:3034 standalone/scannerdrake:623 standalone/scannerdrake:773
#, c-format
msgid "Done"
msgstr ""
#: any.pm:539 help.pm:51
#, c-format
msgid "Accept user"
msgstr ""
#: any.pm:550
#, c-format
msgid "Real name"
msgstr ""
#: any.pm:551 help.pm:51 printer/printerdrake.pm:1330 printer/printerdrake.pm:1444
#, c-format
msgid "User name"
msgstr ""
#: any.pm:554
#, c-format
msgid "Shell"
msgstr ""
#: any.pm:556
#, c-format
msgid "Icon"
msgstr ""
#: any.pm:597 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr ""
#: any.pm:598
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
#: any.pm:599 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr ""
#: any.pm:600
#, c-format
msgid "Choose the default user:"
msgstr ""
#: any.pm:601
#, c-format
msgid "Choose the window manager to run:"
msgstr ""
#: any.pm:613
#, c-format
msgid "Please choose a language to use."
msgstr ""
#: any.pm:633
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
#: any.pm:644 help.pm:634
#, c-format
msgid "Use Unicode by default"
msgstr ""
#: any.pm:645 help.pm:634
#, c-format
msgid "All languages"
msgstr ""
#: any.pm:681 help.pm:571 help.pm:951 install_steps_interactive.pm:903
#, c-format
msgid "Country / Region"
msgstr ""
#: any.pm:682
#, c-format
msgid "Please choose your country."
msgstr ""
#: any.pm:684
#, c-format
msgid "Here is the full list of available countries"
msgstr ""
#: any.pm:685 diskdrake/interactive.pm:289 help.pm:534 help.pm:571 help.pm:609 help.pm:951 install_steps_interactive.pm:118
#, c-format
msgid "More"
msgstr ""
#: any.pm:816
#, c-format
msgid "No sharing"
msgstr ""
#: any.pm:816
#, c-format
msgid "Allow all users"
msgstr ""
#: any.pm:826 do_pkgs.pm:21
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
#: any.pm:828
#, c-format
msgid "You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
#: any.pm:836 do_pkgs.pm:26
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""
#: any.pm:842
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
""
msgstr ""
#: any.pm:857
#, c-format
msgid "Launch userdrake"
msgstr ""
#: any.pm:859
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:12
#, c-format
msgid "Local files"
msgstr ""
#: authentication.pm:12
#, c-format
msgid "LDAP"
msgstr ""
#: authentication.pm:12
#, c-format
msgid "NIS"
msgstr ""
#: authentication.pm:12 authentication.pm:45
#, c-format
msgid "Windows Domain"
msgstr ""
#: authentication.pm:28
#, c-format
msgid "Authentication LDAP"
msgstr ""
#: authentication.pm:29
#, c-format
msgid "LDAP Base dn"
msgstr ""
#: authentication.pm:30
#, c-format
msgid "LDAP Server"
msgstr ""
#: authentication.pm:35
#, c-format
msgid "Authentication NIS"
msgstr ""
#: authentication.pm:36
#, c-format
msgid "NIS Domain"
msgstr ""
#: authentication.pm:37
#, c-format
msgid "NIS Server"
msgstr ""
#: authentication.pm:42
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are good."
msgstr ""
#: authentication.pm:44
#, c-format
msgid "Authentication Windows Domain"
msgstr ""
#: authentication.pm:46
#, c-format
msgid "Domain Admin User Name"
msgstr ""
#: authentication.pm:47
#, c-format
msgid "Domain Admin Password"
msgstr ""
#: authentication.pm:81
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr ""
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:547
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
""
msgstr ""
#: bootloader.pm:679
#, c-format
msgid "SILO"
msgstr ""
#: bootloader.pm:681 help.pm:729
#, c-format
msgid "LILO with graphical menu"
msgstr ""
#: bootloader.pm:682 help.pm:729
#, c-format
msgid "LILO with text menu"
msgstr ""
#: bootloader.pm:684
#, c-format
msgid "Grub"
msgstr ""
#: bootloader.pm:686
#, c-format
msgid "Yaboot"
msgstr ""
#: bootloader.pm:1153
#, c-format
msgid "not enough room in /boot"
msgstr ""
#: bootloader.pm:1181
#, c-format
msgid ""
"You can't install the bootloader on a %s partition\n"
""
msgstr ""
#: common.pm:125
#, c-format
msgid "KB"
msgstr ""
#: common.pm:125
#, c-format
msgid "MB"
msgstr ""
#: common.pm:125
#, c-format
msgid "GB"
msgstr ""
#: common.pm:133
#, c-format
msgid "TB"
msgstr ""
#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr ""
#: common.pm:143
#, c-format
msgid "1 minute"
msgstr ""
#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr ""
#: common.pm:196
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr ""
#: common.pm:203
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""
#: common.pm:268
#, c-format
msgid "kdesu missing"
msgstr ""
#: common.pm:271
#, c-format
msgid "consolehelper missing"
msgstr ""
#: crypto.pm:14 crypto.pm:28 lang.pm:235 network/netconnect.pm:55 network/netconnect.pm:291
#, c-format
msgid "France"
msgstr ""
#: crypto.pm:15 lang.pm:211
#, c-format
msgid "Costa Rica"
msgstr ""
#: crypto.pm:16 crypto.pm:29 lang.pm:183 network/netconnect.pm:58 network/netconnect.pm:290
#, c-format
msgid "Belgium"
msgstr ""
#: crypto.pm:17 crypto.pm:30 lang.pm:216
#, c-format
msgid "Czech Republic"
msgstr ""
#: crypto.pm:18 crypto.pm:31 lang.pm:217
#, c-format
msgid "Germany"
msgstr ""
#: crypto.pm:19 crypto.pm:32 lang.pm:248
#, c-format
msgid "Greece"
msgstr ""
#: crypto.pm:20 crypto.pm:33 lang.pm:321
#, c-format
msgid "Norway"
msgstr ""
#: crypto.pm:21 crypto.pm:34 lang.pm:350
#, c-format
msgid "Sweden"
msgstr ""
#: crypto.pm:22 crypto.pm:36 lang.pm:320 network/netconnect.pm:56 network/netconnect.pm:293
#, c-format
msgid "Netherlands"
msgstr ""
#: crypto.pm:23 crypto.pm:37 lang.pm:268 network/netconnect.pm:57 network/netconnect.pm:292 standalone/drakxtv:48
#, c-format
msgid "Italy"
msgstr ""
#: crypto.pm:24 crypto.pm:38 lang.pm:176
#, c-format
msgid "Austria"
msgstr ""
#: crypto.pm:35 crypto.pm:61 lang.pm:384 network/netconnect.pm:59 network/netconnect.pm:295
#, c-format
msgid "United States"
msgstr ""
#: diskdrake/dav.pm:19
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:27
#, c-format
msgid "New"
msgstr ""
#: diskdrake/dav.pm:63 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr ""
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:411 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr ""
#: diskdrake/dav.pm:65 help.pm:137
#, c-format
msgid "Server"
msgstr ""
#: diskdrake/dav.pm:66 diskdrake/interactive.pm:405 diskdrake/interactive.pm:613 diskdrake/interactive.pm:632 diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr ""
#: diskdrake/dav.pm:85
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr ""
#: diskdrake/dav.pm:89
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""
#: diskdrake/dav.pm:111
#, c-format
msgid "Server: "
msgstr ""
#: diskdrake/dav.pm:112 diskdrake/interactive.pm:466 diskdrake/interactive.pm:1144 diskdrake/interactive.pm:1219
#, c-format
msgid "Mount point: "
msgstr ""
#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1227
#, c-format
msgid "Options: %s"
msgstr ""
#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:992 diskdrake/interactive.pm:1002 diskdrake/interactive.pm:1062
#, c-format
msgid "Read carefully!"
msgstr ""
#: diskdrake/hd_gtk.pm:96
#, c-format
msgid "Please make a backup of your data first"
msgstr ""
#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)\n"
"at the beginning of the disk"
msgstr ""
#: diskdrake/hd_gtk.pm:156 help.pm:534
#, c-format
msgid "Wizard"
msgstr ""
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid "Choose action"
msgstr ""
#: diskdrake/hd_gtk.pm:193
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
#: diskdrake/hd_gtk.pm:195
#, c-format
msgid "Please click on a partition"
msgstr ""
#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:487
#, c-format
msgid "Details"
msgstr ""
#: diskdrake/hd_gtk.pm:255
#, c-format
msgid "No hard drives found"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Ext2"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Journalised FS"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Swap"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "SunOS"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "HFS"
msgstr ""
#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Windows"
msgstr ""
#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:338 mouse.pm:158 services.pm:164 standalone/drakbackup:1931 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr ""
#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1160
#, c-format
msgid "Empty"
msgstr ""
#: diskdrake/hd_gtk.pm:331
#, c-format
msgid "Filesystem types:"
msgstr ""
#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``%s'' instead"
msgstr ""
#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353 diskdrake/interactive.pm:406 diskdrake/interactive.pm:566 diskdrake/removable.pm:26 diskdrake/removable.pm:49 standalone/harddrake2:67
#, c-format
msgid "Type"
msgstr ""
#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:428
#, c-format
msgid "Create"
msgstr ""
#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:415 standalone/drakperm:124 standalone/printerdrake:228
#, c-format
msgid "Delete"
msgstr ""
#: diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``Unmount'' first"
msgstr ""
#: diskdrake/interactive.pm:178
#, c-format
msgid "Choose another partition"
msgstr ""
#: diskdrake/interactive.pm:178
#, c-format
msgid "Choose a partition"
msgstr ""
#: diskdrake/interactive.pm:207
#, c-format
msgid "Exit"
msgstr ""
#: diskdrake/interactive.pm:240 help.pm:534
#, c-format
msgid "Undo"
msgstr ""
#: diskdrake/interactive.pm:240
#, c-format
msgid "Toggle to normal mode"
msgstr ""
#: diskdrake/interactive.pm:240
#, c-format
msgid "Toggle to expert mode"
msgstr ""
#: diskdrake/interactive.pm:259
#, c-format
msgid "Continue anyway?"
msgstr ""
#: diskdrake/interactive.pm:264
#, c-format
msgid "Quit without saving"
msgstr ""
#: diskdrake/interactive.pm:264
#, c-format
msgid "Quit without writing the partition table?"
msgstr ""
#: diskdrake/interactive.pm:269
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr ""
#: diskdrake/interactive.pm:274 install_steps_interactive.pm:305
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
#: diskdrake/interactive.pm:287 help.pm:534
#, c-format
msgid "Clear all"
msgstr ""
#: diskdrake/interactive.pm:288 help.pm:534
#, c-format
msgid "Auto allocate"
msgstr ""
#: diskdrake/interactive.pm:294
#, c-format
msgid "Hard drive information"
msgstr ""
#: diskdrake/interactive.pm:326
#, c-format
msgid "All primary partitions are used"
msgstr ""
#: diskdrake/interactive.pm:327
#, c-format
msgid "I can't add any more partition"
msgstr ""
#: diskdrake/interactive.pm:328
#, c-format
msgid "To have more partitions, please delete one to be able to create an extended partition"
msgstr ""
#: diskdrake/interactive.pm:339 help.pm:534
#, c-format
msgid "Save partition table"
msgstr ""
#: diskdrake/interactive.pm:340 help.pm:534
#, c-format
msgid "Restore partition table"
msgstr ""
#: diskdrake/interactive.pm:341 help.pm:534
#, c-format
msgid "Rescue partition table"
msgstr ""
#: diskdrake/interactive.pm:343 help.pm:534
#, c-format
msgid "Reload partition table"
msgstr ""
#: diskdrake/interactive.pm:345 help.pm:534
#, c-format
msgid "Removable media automounting"
msgstr ""
#: diskdrake/interactive.pm:354 diskdrake/interactive.pm:374
#, c-format
msgid "Select file"
msgstr ""
#: diskdrake/interactive.pm:361
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
#: diskdrake/interactive.pm:375 harddrake/sound.pm:219 keyboard.pm:311 network/netconnect.pm:400 network/netconnect.pm:409 network/netconnect.pm:430 network/netconnect.pm:435 standalone/drakTermServ:1062 standalone/drakTermServ:1692 standalone/drakbackup:765 standalone/drakbackup:863 standalone/drakclock:200 standalone/drakconnect:758 standalone/drakfloppy:295 standalone/drakups:27
#, c-format
msgid "Warning"
msgstr ""
#: diskdrake/interactive.pm:376
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
#: diskdrake/interactive.pm:387
#, c-format
msgid "Trying to rescue partition table"
msgstr ""
#: diskdrake/interactive.pm:393
#, c-format
msgid "Detailed information"
msgstr ""
#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:703
#, c-format
msgid "Resize"
msgstr ""
#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:771
#, c-format
msgid "Move"
msgstr ""
#: diskdrake/interactive.pm:410
#, c-format
msgid "Format"
msgstr ""
#: diskdrake/interactive.pm:412
#, c-format
msgid "Add to RAID"
msgstr ""
#: diskdrake/interactive.pm:413
#, c-format
msgid "Add to LVM"
msgstr ""
#: diskdrake/interactive.pm:416
#, c-format
msgid "Remove from RAID"
msgstr ""
#: diskdrake/interactive.pm:417
#, c-format
msgid "Remove from LVM"
msgstr ""
#: diskdrake/interactive.pm:418
#, c-format
msgid "Modify RAID"
msgstr ""
#: diskdrake/interactive.pm:419
#, c-format
msgid "Use for loopback"
msgstr ""
#: diskdrake/interactive.pm:459
#, c-format
msgid "Create a new partition"
msgstr ""
#: diskdrake/interactive.pm:462
#, c-format
msgid "Start sector: "
msgstr ""
#: diskdrake/interactive.pm:464 diskdrake/interactive.pm:873
#, c-format
msgid "Size in MB: "
msgstr ""
#: diskdrake/interactive.pm:465 diskdrake/interactive.pm:874
#, c-format
msgid "Filesystem type: "
msgstr ""
#: diskdrake/interactive.pm:470
#, c-format
msgid "Preference: "
msgstr ""
#: diskdrake/interactive.pm:473
#, c-format
msgid "Logical volume name "
msgstr ""
#: diskdrake/interactive.pm:502
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
#: diskdrake/interactive.pm:532
#, c-format
msgid "Remove the loopback file?"
msgstr ""
#: diskdrake/interactive.pm:551
#, c-format
msgid "After changing type of partition %s, all data on this partition will be lost"
msgstr ""
#: diskdrake/interactive.pm:562
#, c-format
msgid "Change partition type"
msgstr ""
#: diskdrake/interactive.pm:563 diskdrake/removable.pm:48
#, c-format
msgid "Which filesystem do you want?"
msgstr ""
#: diskdrake/interactive.pm:571
#, c-format
msgid "Switching from ext2 to ext3"
msgstr ""
#: diskdrake/interactive.pm:600
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr ""
#: diskdrake/interactive.pm:601
#, c-format
msgid "Where do you want to mount device %s?"
msgstr ""
#: diskdrake/interactive.pm:606
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
#: diskdrake/interactive.pm:631
#, c-format
msgid "Where do you want to mount %s?"
msgstr ""
#: diskdrake/interactive.pm:655 diskdrake/interactive.pm:735 install_interactive.pm:156 install_interactive.pm:186
#, c-format
msgid "Resizing"
msgstr ""
#: diskdrake/interactive.pm:655
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr ""
#: diskdrake/interactive.pm:691
#, c-format
msgid "This partition is not resizeable"
msgstr ""
#: diskdrake/interactive.pm:696
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
#: diskdrake/interactive.pm:698
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
#: diskdrake/interactive.pm:703
#, c-format
msgid "Choose the new size"
msgstr ""
#: diskdrake/interactive.pm:704
#, c-format
msgid "New size in MB: "
msgstr ""
#: diskdrake/interactive.pm:748 install_interactive.pm:194
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
#: diskdrake/interactive.pm:772
#, c-format
msgid "Which disk do you want to move it to?"
msgstr ""
#: diskdrake/interactive.pm:773
#, c-format
msgid "Sector"
msgstr ""
#: diskdrake/interactive.pm:774
#, c-format
msgid "Which sector do you want to move it to?"
msgstr ""
#: diskdrake/interactive.pm:777
#, c-format
msgid "Moving"
msgstr ""
#: diskdrake/interactive.pm:777
#, c-format
msgid "Moving partition..."
msgstr ""
#: diskdrake/interactive.pm:799
#, c-format
msgid "Choose an existing RAID to add to"
msgstr ""
#: diskdrake/interactive.pm:800 diskdrake/interactive.pm:817
#, c-format
msgid "new"
msgstr ""
#: diskdrake/interactive.pm:815
#, c-format
msgid "Choose an existing LVM to add to"
msgstr ""
#: diskdrake/interactive.pm:821
#, c-format
msgid "LVM name?"
msgstr ""
#: diskdrake/interactive.pm:858
#, c-format
msgid "This partition can't be used for loopback"
msgstr ""
#: diskdrake/interactive.pm:871
#, c-format
msgid "Loopback"
msgstr ""
#: diskdrake/interactive.pm:872
#, c-format
msgid "Loopback file name: "
msgstr ""
#: diskdrake/interactive.pm:877
#, c-format
msgid "Give a file name"
msgstr ""
#: diskdrake/interactive.pm:880
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""
#: diskdrake/interactive.pm:881
#, c-format
msgid "File already exists. Use it?"
msgstr ""
#: diskdrake/interactive.pm:904
#, c-format
msgid "Mount options"
msgstr ""
#: diskdrake/interactive.pm:911
#, c-format
msgid "Various"
msgstr ""
#: diskdrake/interactive.pm:975
#, c-format
msgid "device"
msgstr ""
#: diskdrake/interactive.pm:976
#, c-format
msgid "level"
msgstr ""
#: diskdrake/interactive.pm:977
#, c-format
msgid "chunk size"
msgstr ""
#: diskdrake/interactive.pm:993
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr ""
#: diskdrake/interactive.pm:1008
#, c-format
msgid "What type of partitioning?"
msgstr ""
#: diskdrake/interactive.pm:1024
#, c-format
msgid "The package %s is needed. Install it?"
msgstr ""
#: diskdrake/interactive.pm:1053
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
#: diskdrake/interactive.pm:1062
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr ""
#: diskdrake/interactive.pm:1075
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
#: diskdrake/interactive.pm:1092
#, c-format
msgid "Move files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1092
#, c-format
msgid "Hide files"
msgstr ""
#: diskdrake/interactive.pm:1093
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
#: diskdrake/interactive.pm:1104
#, c-format
msgid "Moving files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1108
#, c-format
msgid "Copying %s"
msgstr ""
#: diskdrake/interactive.pm:1112
#, c-format
msgid "Removing %s"
msgstr ""
#: diskdrake/interactive.pm:1124
#, c-format
msgid "partition %s is now known as %s"
msgstr ""
#: diskdrake/interactive.pm:1145 diskdrake/interactive.pm:1204
#, c-format
msgid "Device: "
msgstr ""
#: diskdrake/interactive.pm:1146
#, c-format
msgid ""
"DOS drive letter: %s (just a guess)\n"
""
msgstr ""
#: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1158 diskdrake/interactive.pm:1223
#, c-format
msgid "Type: "
msgstr ""
#: diskdrake/interactive.pm:1154 install_steps_gtk.pm:350
#, c-format
msgid "Name: "
msgstr ""
#: diskdrake/interactive.pm:1162
#, c-format
msgid ""
"Start: sector %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1163
#, c-format
msgid "Size: %s"
msgstr ""
#: diskdrake/interactive.pm:1165
#, c-format
msgid ", %s sectors"
msgstr ""
#: diskdrake/interactive.pm:1167
#, c-format
msgid ""
"Cylinder %d to %d\n"
""
msgstr ""
#: diskdrake/interactive.pm:1168
#, c-format
msgid ""
"Formatted\n"
""
msgstr ""
#: diskdrake/interactive.pm:1169
#, c-format
msgid ""
"Not formatted\n"
""
msgstr ""
#: diskdrake/interactive.pm:1170
#, c-format
msgid ""
"Mounted\n"
""
msgstr ""
#: diskdrake/interactive.pm:1171
#, c-format
msgid ""
"RAID md%s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1173
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1174
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
""
msgstr ""
#: diskdrake/interactive.pm:1176
#, c-format
msgid ""
"Level %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1177
#, c-format
msgid ""
"Chunk size %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1178
#, c-format
msgid ""
"RAID-disks %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1180
#, c-format
msgid "Loopback file name: %s"
msgstr ""
#: diskdrake/interactive.pm:1183
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
""
msgstr ""
#: diskdrake/interactive.pm:1186
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
""
msgstr ""
#: diskdrake/interactive.pm:1205
#, c-format
msgid "Read-only"
msgstr ""
#: diskdrake/interactive.pm:1206
#, c-format
msgid ""
"Size: %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1207
#, c-format
msgid ""
"Geometry: %s cylinders, %s heads, %s sectors\n"
""
msgstr ""
#: diskdrake/interactive.pm:1208
#, c-format
msgid "Info: "
msgstr ""
#: diskdrake/interactive.pm:1209
#, c-format
msgid ""
"LVM-disks %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1210
#, c-format
msgid ""
"Partition table type: %s\n"
""
msgstr ""
#: diskdrake/interactive.pm:1211
#, c-format
msgid ""
"on channel %d id %d\n"
""
msgstr ""
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Filesystem encryption key"
msgstr ""
#: diskdrake/interactive.pm:1245
#, c-format
msgid "Choose your filesystem encryption key"
msgstr ""
#: diskdrake/interactive.pm:1248
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
#: diskdrake/interactive.pm:1249
#, c-format
msgid "The encryption keys do not match"
msgstr ""
#: diskdrake/interactive.pm:1252 network/netconnect.pm:656 standalone/drakconnect:321
#, c-format
msgid "Encryption key"
msgstr ""
#: diskdrake/interactive.pm:1253
#, c-format
msgid "Encryption key (again)"
msgstr ""
#: diskdrake/removable.pm:47
#, c-format
msgid "Change type"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid "Please enter your username, password and domain name to access this host."
msgstr ""
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3825
#, c-format
msgid "Username"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr ""
#: do_pkgs.pm:136
#, c-format
msgid "Installing packages..."
msgstr ""
#: do_pkgs.pm:210
#, c-format
msgid "Removing packages..."
msgstr ""
#: fs.pm:397
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs.pm:400
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs.pm:403
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs.pm:405
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs.pm:409
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs.pm:413
#, c-format
msgid "Mount the file system read-only."
msgstr ""
#: fs.pm:415
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs.pm:419
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs.pm:427
#, c-format
msgid "Give write access to ordinary users"
msgstr ""
#: fs.pm:563 fs.pm:573 fs.pm:577 fs.pm:581 fs.pm:585 fs.pm:589 swap.pm:12
#, c-format
msgid "%s formatting of %s failed"
msgstr ""
#: fs.pm:626
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr ""
#: fs.pm:633 fs.pm:640
#, c-format
msgid "Formatting partition %s"
msgstr ""
#: fs.pm:637
#, c-format
msgid "Creating and formatting file %s"
msgstr ""
#: fs.pm:703 fs.pm:756
#, c-format
msgid "Mounting partition %s"
msgstr ""
#: fs.pm:704 fs.pm:757
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""
#: fs.pm:724 fs.pm:732
#, c-format
msgid "Checking %s"
msgstr ""
#: fs.pm:773 partition_table.pm:635
#, c-format
msgid "error unmounting %s: %s"
msgstr ""
#: fs.pm:805
#, c-format
msgid "Enabling swap partition %s"
msgstr ""
#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr ""
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr ""
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr ""
#: fsedit.pm:253
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
""
msgstr ""
#: fsedit.pm:513
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr ""
#: fsedit.pm:514
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
#: fsedit.pm:533
#, c-format
msgid "Mount points must begin with a leading /"
msgstr ""
#: fsedit.pm:534
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""
#: fsedit.pm:535
#, c-format
msgid ""
"There is already a partition with mount point %s\n"
""
msgstr ""
#: fsedit.pm:537
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:540
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""
#: fsedit.pm:542
#, c-format
msgid "You may not be able to install lilo (since lilo doesn't handle a LV on multiple PVs)"
msgstr ""
#: fsedit.pm:545 fsedit.pm:547
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr ""
#: fsedit.pm:549
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n"
""
msgstr ""
#: fsedit.pm:551
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
#: fsedit.pm:612
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr ""
#: fsedit.pm:614
#, c-format
msgid "Nothing to do"
msgstr ""
#: fsedit.pm:710
#, c-format
msgid "Error opening %s for writing: %s"
msgstr ""
#: harddrake/data.pm:45
#, c-format
msgid "Floppy"
msgstr ""
#: harddrake/data.pm:46
#, c-format
msgid "Zip"
msgstr ""
#: harddrake/data.pm:47
#, c-format
msgid "Disk"
msgstr ""
#: harddrake/data.pm:48
#, c-format
msgid "CDROM"
msgstr ""
#: harddrake/data.pm:49
#, c-format
msgid "CD/DVD burners"
msgstr ""
#: harddrake/data.pm:50
#, c-format
msgid "DVD-ROM"
msgstr ""
#: harddrake/data.pm:51 standalone/drakbackup:2389
#, c-format
msgid "Tape"
msgstr ""
#: harddrake/data.pm:52
#, c-format
msgid "Videocard"
msgstr ""
#: harddrake/data.pm:53
#, c-format
msgid "Tvcard"
msgstr ""
#: harddrake/data.pm:54
#, c-format
msgid "Other MultiMedia devices"
msgstr ""
#: harddrake/data.pm:55
#, c-format
msgid "Soundcard"
msgstr ""
#: harddrake/data.pm:56
#, c-format
msgid "Webcam"
msgstr ""
#: harddrake/data.pm:57
#, c-format
msgid "Processors"
msgstr ""
#: harddrake/data.pm:58
#, c-format
msgid "Ethernetcard"
msgstr ""
#: harddrake/data.pm:66
#, c-format
msgid "Modem"
msgstr ""
#: harddrake/data.pm:67
#, c-format
msgid "ADSL adapters"
msgstr ""
#: harddrake/data.pm:69
#, c-format
msgid "ISDN adapters"
msgstr ""
#: harddrake/data.pm:71
#, c-format
msgid "Bridges and system controllers"
msgstr ""
#: harddrake/data.pm:72 standalone/harddrake2:306
#, c-format
msgid "Unknown/Others"
msgstr ""
#: harddrake/data.pm:74 help.pm:198 help.pm:951 install_steps_interactive.pm:931 printer/printerdrake.pm:671 printer/printerdrake.pm:3951
#, c-format
msgid "Printer"
msgstr ""
#: harddrake/data.pm:76
#, c-format
msgid "Scanner"
msgstr ""
#: harddrake/data.pm:78 help.pm:951 install_steps_interactive.pm:924
#, c-format
msgid "Mouse"
msgstr ""
#: harddrake/data.pm:83
#, c-format
msgid "Joystick"
msgstr ""
#: harddrake/data.pm:85
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""
#: harddrake/data.pm:86
#, c-format
msgid "Firewire controllers"
msgstr ""
#: harddrake/data.pm:87
#, c-format
msgid "SCSI controllers"
msgstr ""
#: harddrake/data.pm:88
#, c-format
msgid "USB controllers"
msgstr ""
#: harddrake/data.pm:89
#, c-format
msgid "SMBus controllers"
msgstr ""
#: harddrake/data.pm:97
#, c-format
msgid "cpu # "
msgstr ""
#: harddrake/sound.pm:147 standalone/drakconnect:172
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr ""
#: harddrake/sound.pm:179
#, c-format
msgid "No alternative driver"
msgstr ""
#: harddrake/sound.pm:180
#, c-format
msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
msgstr ""
#: harddrake/sound.pm:186
#, c-format
msgid "Sound configuration"
msgstr ""
#: harddrake/sound.pm:188
#, c-format
msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)."
msgstr ""
#: harddrake/sound.pm:190
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
msgstr ""
#: harddrake/sound.pm:192
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n"
""
msgstr ""
#: harddrake/sound.pm:206 harddrake/sound.pm:286 standalone/drakups:134
#, c-format
msgid "Driver:"
msgstr ""
#: harddrake/sound.pm:211
#, c-format
msgid "Trouble shooting"
msgstr ""
#: harddrake/sound.pm:219
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:227
#, c-format
msgid "No open source driver"
msgstr ""
#: harddrake/sound.pm:228
#, c-format
msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
msgstr ""
#: harddrake/sound.pm:231
#, c-format
msgid "No known driver"
msgstr ""
#: harddrake/sound.pm:232
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""
#: harddrake/sound.pm:236
#, c-format
msgid "Unknown driver"
msgstr ""
#: harddrake/sound.pm:237
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
#: harddrake/sound.pm:250
#, c-format
msgid "Sound trouble shooting"
msgstr ""
#: harddrake/sound.pm:251
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
""
msgstr ""
#: harddrake/sound.pm:277
#, c-format
msgid "Let me pick any driver"
msgstr ""
#: harddrake/sound.pm:280
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""
#: harddrake/sound.pm:281
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
#: harddrake/v4l.pm:14 harddrake/v4l.pm:66
#, c-format
msgid "Auto-detect"
msgstr ""
#: harddrake/v4l.pm:67 harddrake/v4l.pm:219
#, c-format
msgid "Unknown|Generic"
msgstr ""
#: harddrake/v4l.pm:100
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:101
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:245
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:248
#, c-format
msgid "Card model:"
msgstr ""
#: harddrake/v4l.pm:249
#, c-format
msgid "Tuner type:"
msgstr ""
#: harddrake/v4l.pm:250
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:250
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:252
#, c-format
msgid "PLL setting:"
msgstr ""
#: harddrake/v4l.pm:253
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:253
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
#: help.pm:13 install_steps_gtk.pm:614 install_steps_interactive.pm:92 install_steps_interactive.pm:693 standalone/drakautoinst:199
#, c-format
msgid "Accept"
msgstr ""
#: help.pm:16
#, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the username. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"%s\".\n"
"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 help.pm:51 help.pm:192 help.pm:440 help.pm:660 help.pm:965 help.pm:965 install_steps_gtk.pm:286 interactive.pm:403 interactive/newt.pm:300 network/netconnect.pm:251 network/tools.pm:228 printer/printerdrake.pm:2908 standalone/drakbackup:4424 standalone/drakbackup:4450 standalone/drakbackup:4480 standalone/drakbackup:4504 ugtk2.pm:494
#, c-format
msgid "Next"
msgstr ""
#: help.pm:51 help.pm:414 help.pm:440 help.pm:634 help.pm:702 help.pm:729 interactive.pm:371
#, c-format
msgid "Advanced"
msgstr ""
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
#: help.pm:90
#, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various groups, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' group installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the applications that are in the workstation group.\n"
"\n"
" * \"%s\": if plan on using your machine for programming, choose the\n"
"appropriate packages from that group.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
#: help.pm:137
#, c-format
msgid "Workstation"
msgstr ""
#: help.pm:137
#, c-format
msgid "Development"
msgstr ""
#: help.pm:137
#, c-format
msgid "Graphical Environment"
msgstr ""
#: help.pm:137 install_steps_interactive.pm:555
#, c-format
msgid "With X"
msgstr ""
#: help.pm:137
#, c-format
msgid "With basic documentation"
msgstr ""
#: help.pm:137
#, c-format
msgid "Truly minimal install"
msgstr ""
#: help.pm:137 install_steps_gtk.pm:281 install_steps_interactive.pm:601
#, c-format
msgid "Individual package selection"
msgstr ""
#: help.pm:137 help.pm:592
#, c-format
msgid "Upgrade"
msgstr ""
#: help.pm:140
#, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each other such\n"
"that installation of a package requires that some other program is also\n"
"rerquired to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
#: help.pm:172 help.pm:294 help.pm:322 help.pm:453 install_any.pm:416 interactive.pm:149 modules/interactive.pm:69 standalone/harddrake2:217 ugtk2.pm:1043 wizards.pm:155
#, c-format
msgid "No"
msgstr ""
#: help.pm:172 help.pm:294 help.pm:453 help.pm:453 install_any.pm:416 interactive.pm:149 modules/interactive.pm:69 standalone/drakgw:272 standalone/drakgw:273 standalone/drakgw:281 standalone/drakgw:291 standalone/harddrake2:216 ugtk2.pm:1043 wizards.pm:155
#, c-format
msgid "Yes"
msgstr ""
#: help.pm:172
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:175
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
#: help.pm:192 network/netconnect.pm:158
#, c-format
msgid "Use auto detection"
msgstr ""
#: help.pm:195
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
#: help.pm:198 help.pm:571 help.pm:951 help.pm:951 help.pm:951 help.pm:951 help.pm:951 help.pm:951 help.pm:951 install_steps_gtk.pm:664 standalone/drakbackup:2653 standalone/drakbackup:2663 standalone/drakbackup:2673 standalone/drakbackup:2683
#, c-format
msgid "Configure"
msgstr ""
#: help.pm:201
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
#: help.pm:219
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same timezone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can used by\n"
"other machines on your local network as well."
msgstr ""
#: help.pm:230 install_steps_interactive.pm:830
#, c-format
msgid "Hardware clock set to GMT"
msgstr ""
#: help.pm:230
#, c-format
msgid "Automatic time synchronization"
msgstr ""
#: help.pm:233
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
#: help.pm:244
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
#: help.pm:297
#, c-format
msgid ""
"Monitor\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""
#: help.pm:304
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""
#: help.pm:312
#, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
#: help.pm:317
#, c-format
msgid ""
"Options\n"
"\n"
" Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
#: help.pm:325
#, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
"partition. Resizing can be performed without the loss of any data, provided\n"
"you have previously defragmented the Windows partition and that it uses the\n"
"FAT format. Backing up your data is strongly recommended.. Using this\n"
"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrake Linux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
"Guide''."
msgstr ""
#: help.pm:383 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr ""
#: help.pm:383
#, c-format
msgid "Use existing partition"
msgstr ""
#: help.pm:383 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr ""
#: help.pm:383 install_interactive.pm:211
#, c-format
msgid "Erase entire disk"
msgstr ""
#: help.pm:383
#, c-format
msgid "Remove Windows"
msgstr ""
#: help.pm:383 install_interactive.pm:226
#, c-format
msgid "Custom disk partitioning"
msgstr ""
#: help.pm:386
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
" Note that two different options are available after clicking the button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
#: help.pm:414
#, c-format
msgid "generate auto-install floppy"
msgstr ""
#: help.pm:414 install_steps_interactive.pm:1314
#, c-format
msgid "Replay"
msgstr ""
#: help.pm:414 install_steps_interactive.pm:1314
#, c-format
msgid "Automated"
msgstr ""
#: help.pm:414 install_steps_interactive.pm:1317
#, c-format
msgid "Save packages selection"
msgstr ""
#: help.pm:417
#, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:440 help.pm:965 install_steps_gtk.pm:443 interactive.pm:404 interactive/newt.pm:299 printer/printerdrake.pm:2906 standalone/drakbackup:4225 standalone/drakbackup:4253 standalone/drakbackup:4311 standalone/drakbackup:4337 standalone/drakbackup:4363 standalone/drakbackup:4420 standalone/drakbackup:4446 standalone/drakbackup:4476 standalone/drakbackup:4500 ugtk2.pm:492
#, c-format
msgid "Previous"
msgstr ""
#: help.pm:443
#, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one nearer to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:453 help.pm:592 install_steps_gtk.pm:442 install_steps_interactive.pm:152 standalone/drakbackup:4539
#, c-format
msgid "Install"
msgstr ""
#: help.pm:456
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option."
msgstr ""
#: help.pm:465
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": unchecking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:534
#, c-format
msgid "Toggle between normal/expert mode"
msgstr ""
#: help.pm:537
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose which one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:568
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
#: help.pm:574
#, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:595
#, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you may not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may have a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation where your native language and keyboard do\n"
"not match. In either case, this installation step will allow you to select\n"
"an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:612
#, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will be installed. Additionally, the\n"
"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
"however that this is an experimental feature. If you select different\n"
"languages requiring different encoding the unicode support will be\n"
"installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
#: help.pm:634
#, c-format
msgid "Espanol"
msgstr ""
#: help.pm:637
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
#: help.pm:663
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
#: help.pm:667
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the internet or that you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:702
#, c-format
msgid "authentication"
msgstr ""
#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:702 install_steps_interactive.pm:1150
#, c-format
msgid "No password"
msgstr ""
#: help.pm:705
#, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
" * \"%s\": if you prefer grub (text menu).\n"
"\n"
" * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
" * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
#: help.pm:729
#, c-format
msgid "GRUB"
msgstr ""
#: help.pm:729
#, c-format
msgid "/dev/hda"
msgstr ""
#: help.pm:729
#, c-format
msgid "/dev/hdb"
msgstr ""
#: help.pm:729
#, c-format
msgid "/dev/fd0"
msgstr ""
#: help.pm:729
#, c-format
msgid "Delay before booting the default image"
msgstr ""
#: help.pm:732
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
#: help.pm:745 interactive.pm:295 interactive/gtk.pm:471 standalone/drakbackup:1827 standalone/drakfont:591 standalone/drakfont:654 standalone/drakups:280 standalone/drakups:324 standalone/drakups:344
#, c-format
msgid "Add"
msgstr ""
#: help.pm:745 interactive.pm:295 interactive/gtk.pm:471
#, c-format
msgid "Modify"
msgstr ""
#: help.pm:745 interactive.pm:295 interactive/gtk.pm:471 standalone/drakups:282 standalone/drakups:326 standalone/drakups:346
#, c-format
msgid "Remove"
msgstr ""
#: help.pm:745 standalone/drakTermServ:218 standalone/drakTermServ:506 standalone/drakfont:577
#, c-format
msgid "OK"
msgstr ""
#: help.pm:748
#, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader."
msgstr ""
#: help.pm:763
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
|