# translation of DrakX.po to Arabic
# Amr Fathy <amr10@menanet.net>, 2001.
# Mohammed Gamal <f2c2001@yahoo.com>, 2002.
# Youcef Rabah Rahal <rahal@arabeyes.org>, 2004.
# Ossama M. Khayat <okhayat@yahoo.com>, 2004, 2005.
# Munzir Taha <munzir@kacst.edu.sa>, 2004.
# Abdulaziz Al-Arfaj <alarfaj@arabeyes.org>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-02-24 14:10+0100\n"
"PO-Revision-Date: 2005-03-03 01:06+0300\n"
"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
"Language-Team: Arabic <support@arabeyes.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9.1\n"
"Plural-Forms: nplurals=4; plural=n==1 ? 0 : n==2 ? 1 : n>=3 && n<=10 ? 2 : "
"3\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "ما هو مفتاح USB الذي تريد تنسيقه؟"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"أنت بصدد تنسيق جهاز USB \"%s\". ستحذف هذه العملية كلّ البيانات المتواجدة "
"عليه.\n"
"تأكّد من أنّ الجهاز المختار هو مفتاح الـUSB الّذي تريد شوكلته.\n"
"ننصحك بفصل كلّ أجهزة USB للخزن الأخرى عند تأدية هذه العملية."
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "المفتاح غير قابل للكتابة"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"يبدو أن مفتاح USB محميّ من الكتابة عليه. رجاءً\n"
"قم بفَصْله، أزل حماية الكتابة، وأعد وَصْله مجدّداً."
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "حاول مجدّدا"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "الاستمرار بدون مفتاح USB"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
"يبدو أن مفتاح USB محميّ من الكتابة عليه، إلّا أنّنا لانستطيع فكّ توصيله الآن.\n"
"\n"
"\n"
"اضغط الزّر لإعادة تشغيل الجهاز، فُكّ توصيله، أزل حماية الكتابة،\n"
"صِلْ المفتاح مرّة أخرى، وشغّل Mandrake Move مرّة أخرى."
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317
#, c-format
msgid "Reboot"
msgstr "إعادة التشغيل"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
"مفتاح USB لا يحتوي على أي تجزيئات ويندوز (FAT).\n"
"يجب أن يكون هناك واحد للاستمرار (بالإضافة لذلك، فهو قياسيّ أكثر حتى تكون\n"
"قادراً على نقل والوصول إلى الملفّات من الأجهزة\n"
"التي تعمل على ويندوز). رجاء ضَعْ مفتاح USB يحتوى على\n"
" تجزيء ويندوز بدلاً من ذلك.\n"
"\n"
"\n"
"يمكنك أيضاً التقدّم دون مفتاح USB - سوف لا تزال تكون\n"
"قادراً على استخدام Mandrake Move كنظام تشغيل ماندريك حيّ."
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
"لم نتمكّن من العثور على أي مفتاح USB على نظامك. إن قمت\n"
"بوصْل مفتاح USB الآن، سوف يقدر Mandrake Move\n"
"أن يحفظ البيانات بدليلك المنزل بشفافية\n"
"وإعدادات النّظام العامّة، وذلك عند الإقلاع التّالي على هذا الجهاز\n"
"أو إقلاع آخر. ملاحظة: إن قمت بتوصيل مفتاح الآن، انتظر عدّة\n"
"ثوانٍ قبل إعادة الاستكشاف.\n"
"\n"
"\n"
"يمكنك أيضاً التّقدّم بلا مفتاح USB - سوف تكون لا تزال\n"
"قادراً على استخدام Mandrake Move كنظام تشغيل\n"
"ماندريك حيّ."
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "تحتاج مفتاحا لحفظ بياناتك"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "إكتشاف مفتاح USB مرّة أخرى"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "إعداد مفتاح USB"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "الرجاء الانتظار، جاري إعداد ملفّات تهيئة النّظام على مفتاح USB..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "أدخل معلومات المستخدم الخاصّة بك، سوف تستعمل كلمة المرور لحافظ الشّاشة"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "تهيئة آلية"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "الرجاء الانتظار، جاري اكتشاف وتهيئة الأجهزة..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393
#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541
#: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183
#: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:1037
#: network/netconnect.pm:1041 network/netconnect.pm:1046
#: network/netconnect.pm:1072 network/netconnect.pm:1141
#: network/netconnect.pm:1145 network/netconnect.pm:1283
#: network/netconnect.pm:1288 network/netconnect.pm:1306
#: network/netconnect.pm:1491 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:635
#: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335
#: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416
#: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434
#: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605
#: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613
#: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719
#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737
#: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852
#: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957
#: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984
#: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949
#: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501
#: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509
#: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205
#: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483
#: standalone/drakTermServ:392 standalone/drakTermServ:753
#: standalone/drakTermServ:760 standalone/drakTermServ:779
#: standalone/drakTermServ:998 standalone/drakTermServ:1478
#: standalone/drakTermServ:1483 standalone/drakTermServ:1490
#: standalone/drakTermServ:1502 standalone/drakTermServ:1523
#: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1127 standalone/drakbackup:1160
#: standalone/drakbackup:1671 standalone/drakbackup:1827
#: standalone/drakbackup:2421 standalone/drakbackup:4110
#: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124
#: standalone/drakconnect:649 standalone/drakconnect:652
#: standalone/drakconnect:671 standalone/drakfloppy:297
#: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209
#: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604
#: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107
#: standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "خطأ"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"ظهر خطأ و لا أعرف كيف أتعامل معه بأسلوب جيد.\n"
"تابع على مسؤوليتك."
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "حدث خطأ"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"حدث خطأ:\n"
"\n"
"\n"
"%s\n"
"\n"
"قد يحدث هذا بسبب ملفّات تهيئة النّظام الفاسدة\n"
"على مفتاح USB، في هذه الحالة فإن إزالتها ومن ثمّ\n"
"إعادة تشغيل Mandrake Move قد يُصلح هذه المشكلة. كي تقوم\n"
"بذلك، اضغط على الزرّ المعنيّ.\n"
"\n"
"\n"
"قد ترغب أيضاً بإعادة التّشغيل وإزالة مفتاح USB، أو\n"
"تفحّص محتوياته ضمن نظام تشغيل آخر، أو حتى أن تلقي\n"
"نظرة على ملفّات السجلّ في الشّاشة الطرفيّة #3 و#4 كي تحاول أن\n"
"تخمّن ما يحدث."
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "إزالة ملفّات تهيئة النّظام"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "إعادة التّشغيل فقط"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "يمكنك فقط التشغيل بدون دعم الأقراص المدمجة"
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "قتل تلك البرامج"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "ليس هناك دعم لقارئ الأقراص المدمجة"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Read carefully!"
msgstr "اقرأ جيدا!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"لا يمكن استعمال قرص مدمج آخر أثناء عمل البرامج التّالية:\n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "يجري النّسخ إلى الذّاكرة للسّماح بنزع القرص المدمج"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 ك.ب."
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 ك.ب."
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 م.ب."
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 م.ب."
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 م.ب."
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 م.ب."
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 م.ب."
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 م.ب."
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 م.ب. أو أكثر"
#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "خادم X"
#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "اختيار خادم X"
#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr "تهيئة متعدد الرؤوس"
#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"نظامك يدعم التهيئة متعدد الرؤوس.\n"
"ماذا تريد أن تفعل؟"
#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "لا أستطع تثبيت حزمة Xorg: %s"
#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "اختيار حجم ذاكرة بطاقة الشاشة"
#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "تهيئة Xorg"
#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "أي تهيئة Xorg تريد؟"
#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr "تهيئة كل الرؤوس بشكل مستقل"
#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "استخدام امتداد Xinerama"
#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "تهيئة البطاقة \"%s\"%s فقط"
#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s مع تعزيز عتادي ثلاثي الأبعاد"
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "يمكن لبطاقتك الحصول على دعم تعزيز ثلاثي الأبعاد مع Xorg %s."
#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s مع تعزيز تجريبي للرسوم ثلاثية الأبعاد"
#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"يمكن لبطاقتك التمتع بدعم لتعزيز الرسوم ثلاثية الأبعاد مع Xorg %s، \n"
"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914
#, c-format
msgid "Custom"
msgstr "مخصّص"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:737
#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742
#: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "خروج"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "بطاقة الشاشة"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:111
#, c-format
msgid "Monitor"
msgstr "الشاشة"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221
#, c-format
msgid "Resolution"
msgstr "الاستبانة"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "اختبار"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:493 standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "خيارات"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "ملف تهيئة Xorg معطوب. سنتجاهله."
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"هل تريد حفظ التغييرات؟\n"
"التهيئة الحالية هي:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "اختيار شاشة للرّأس رقم %d"
#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor"
msgstr "اختيار شاشة"
#: Xconfig/monitor.pm:118
#, c-format
msgid "Plug'n Play"
msgstr "توصيل وتشغيل"
#: Xconfig/monitor.pm:119 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "شامل"
#: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52
#: standalone/harddrake2:86
#, c-format
msgid "Vendor"
msgstr "المصنع"
#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "تعذر التأكد من وجود Plug 'n Play. الرجاء اختيار الشاشة الصحيحة"
#: Xconfig/monitor.pm:135
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"المعاملان المهمان جدا هما نسبة الإنعاش الأفقي، وهي النسبة التي\n"
"يتم فيها انعاش الشاشة كاملة، و الأهم هو نسبة التزامن الأفقي\n"
"و التي في خلالها يتم عرض خطوط المسح.\n"
"\n"
"من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n"
"أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n"
" إذا لم تكن متأكدا يمكنك اختيار إعدادات عادية."
#: Xconfig/monitor.pm:142
#, c-format
msgid "Horizontal refresh rate"
msgstr "نسبة الإنعاش الأفقي"
#: Xconfig/monitor.pm:143
#, c-format
msgid "Vertical refresh rate"
msgstr "نسبة الإنعاش الرأسي"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 لون (8 بت)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 ألف لون (15 بت)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 ألف لون (16 بت)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 مليون لون (24 بت)"
#: Xconfig/resolution_and_depth.pm:133
#, c-format
msgid "Resolutions"
msgstr "الاستبانات"
#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "اختيار الاستبانة وعمق الألوان"
#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "بطاقة الشاشة: %s"
#: Xconfig/resolution_and_depth.pm:285 interactive.pm:424
#: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:490
#: standalone/drakbackup:3967 standalone/drakbackup:4027
#: standalone/drakbackup:4071 standalone/drakconnect:165
#: standalone/drakconnect:849 standalone/drakconnect:936
#: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506
#: ugtk2.pm:900 ugtk2.pm:923
#, c-format
msgid "Ok"
msgstr "موافق"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3579
#: standalone/drakautoinst:217 standalone/drakbackup:3893
#: standalone/drakbackup:3897 standalone/drakbackup:3955
#: standalone/drakconnect:164 standalone/drakconnect:934
#: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343
#: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900
#, c-format
msgid "Cancel"
msgstr "إلغاء"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519
#: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284
#: standalone/drakbackup:3889 standalone/drakbug:104
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "مساعدة"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "اختبار التهيئة"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "هل تريد تجربة التهيئة؟"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسبب في إيقاف جهازك"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"ظهر خطأ:\n"
"%s\n"
"حاول تغيير بعض المُعطيات "
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "ستتم المغادرة في %d ثوان"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "هل هذا هو الإعداد الصحيح؟"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "لوحة المفاتيح: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "نوع الماوس: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "جهاز الماوس: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "الشاشة: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "تزامن الشاشة الأفقي: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "إنعاش الشاشة الرأسي: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "بطاقة الشاشة: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "عمق الألوان: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "الاستبانة: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "برنامج تشغيل Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "واجهة رسومية عند بدء التشغيل"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"يمكنني إعداد حاسبك ليبدأ الواجهة الرّسومية (Xorg) آليا بعد الإقلاع.\n"
"هل تريد Xorg أن يبدأ بعد إعادة إقلاع جهازك ؟"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"يبدو أن بطاقة الرسوم الخاصة بك تحتوي على موصل للتلفاز.\n"
"يمكن تهيئة البطاقة للعمل باستخدام الـ frame-buffer.\n"
"\n"
"لهذا الغرض يجب عليك توصيل بطاقة الرسوم بالتلفاز قبل بدء تشغيل الحاسب.\n"
"ثم اختيار \"TVout\" من محمّل الإقلاع\n"
"\n"
"هل لديك هذه الميزة؟"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "أي نظام يستخدمه جهاز التلفاز لديك؟"
#: Xconfig/xfree.pm:571
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462
#: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231
#: standalone/service_harddrake:204
#, c-format
msgid "Please wait"
msgstr "الرجاء الانتظار"
#: any.pm:140
#, c-format
msgid "Bootloader installation in progress"
msgstr "محمل الإقلاع قيد التثبيت"
#: any.pm:151
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"يريد LILO تعيين رقم هويّة كتلة للقرص %s. على اي حال، فإن\n"
"تغيير رقم هويّة الكتلة لقرص إقلاع ويندوز NT، 2000، أو XP هو خطأ جسيم.\n"
"هذا التحذير لا ينطبق على أقراص بيانات ويندوز 95 أو 98 أو NT.\n"
"\n"
"أتريد تعيين رقم هويّة كتلة جديد؟"
#: any.pm:162
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "فشل تثبيت محمّل الإقلاع. حدث الخطأ التالي:"
#: any.pm:168
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"قد تحتاج إلى تغيير جهاز إقلاع Open Firmware كي تُمكّن مُحمّل الإقلاع. إن لم يكن "
"مُلقّن محمّل الإقلاع يظهر\n"
"عند إعادة التشغيل، ابق ضاغطاً على Command-Option-O-F عند إعادة التتشغيل "
"وأدخل:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" ثم اكتب: shut-down\n"
"بعد إقلاع النظام التالي يجب أن ترى مُلقّن محمّل الإقلاع."
#: any.pm:206
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"لقد قررت تثبيت محمّل الإقلاع على تجزيء.\n"
"هذا يعني أنه لديك محمّل إقلاع على القرص الذي تستخدمه للإقلاع (مثال: System "
"Commander).\n"
"\n"
"على أي قرص تقوم بالإقلاع؟"
#: any.pm:229 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "القطاع الأول من القرص (MBR)"
#: any.pm:230
#, c-format
msgid "First sector of the root partition"
msgstr "القطاع الأول من التجزيء الجذري"
#: any.pm:232
#, c-format
msgid "On Floppy"
msgstr "على قرص مرن"
#: any.pm:234 help.pm:739 printer/printerdrake.pm:3962
#, c-format
msgid "Skip"
msgstr "تخطّي"
#: any.pm:238
#, c-format
msgid "LILO/grub Installation"
msgstr "تثبيت LILO/grub"
#: any.pm:239
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "أين تريد تثبيت محمّل الإقلاع؟"
#: any.pm:264 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "تهيئة أسلوب الإقلاع"
#: any.pm:266 any.pm:298
#, c-format
msgid "Bootloader main options"
msgstr "خيارات محمّل الإقلاع الرئيسية"
#: any.pm:270
#, c-format
msgid "Give the ram size in MB"
msgstr "اكتب حجم الذاكرة بالميغابايت"
#: any.pm:272
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "خيار ``تشديد خيارات سطر الأوامر`` لا ينفع دون كلمة مرور"
#: any.pm:273 any.pm:606 authentication.pm:176
#, c-format
msgid "The passwords do not match"
msgstr "كلمات المرور غير متطابقة"
#: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270
#, c-format
msgid "Please try again"
msgstr "الرجاء المحاولة مجدداً"
#: any.pm:278 any.pm:301
#, c-format
msgid "Bootloader to use"
msgstr "محمّل الإقلاع المُستخدم"
#: any.pm:280 any.pm:303
#, c-format
msgid "Boot device"
msgstr "جهاز الإقلاع"
#: any.pm:282
#, c-format
msgid "Delay before booting default image"
msgstr "توقيت ما قبل إقلاع الصورة الافتراضية"
#: any.pm:283
#, c-format
msgid "Enable ACPI"
msgstr "تمكين ACPI"
#: any.pm:285
#, c-format
msgid "Force no APIC"
msgstr "إجبار عدم استخدام APIC"
#: any.pm:287
#, c-format
msgid "Force No Local APIC"
msgstr "إجبار عدم استخدام Local APIC"
#: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:633 printer/printerdrake.pm:1596
#: printer/printerdrake.pm:1716 standalone/drakbackup:1653
#: standalone/drakbackup:3495 standalone/drakups:295
#, c-format
msgid "Password"
msgstr "كلمة المرور"
#: any.pm:290 any.pm:634 authentication.pm:182
#, c-format
msgid "Password (again)"
msgstr "كلمة المرور (مجدداً)"
#: any.pm:291
#, c-format
msgid "Restrict command line options"
msgstr "تشديد خيارات سطر الأوامر"
#: any.pm:291
#, c-format
msgid "restrict"
msgstr "تشديد"
#: any.pm:293
#, c-format
msgid "Clean /tmp at each boot"
msgstr "تنظيف /tmp عند كل إقلاع"
#: any.pm:294
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "حجم الذاكرة الدقيق عند الحاجة (عثر على %d م.ب.)"
#: any.pm:302
#, c-format
msgid "Init Message"
msgstr "رسالة Init"
#: any.pm:304
#, c-format
msgid "Open Firmware Delay"
msgstr "تأخير Open Firmware"
#: any.pm:305
#, c-format
msgid "Kernel Boot Timeout"
msgstr "الوقت الأقصى لإقلاع النواة"
#: any.pm:306
#, c-format
msgid "Enable CD Boot?"
msgstr "تمكين الإقلاع من القرص المدمج؟"
#: any.pm:307
#, c-format
msgid "Enable OF Boot?"
msgstr "تمكين إقلاع OF؟"
#: any.pm:308
#, c-format
msgid "Default OS?"
msgstr "نظام التشغيل الافتراضي؟"
#: any.pm:361
#, c-format
msgid "Image"
msgstr "صورة"
#: any.pm:362 any.pm:372
#, c-format
msgid "Root"
msgstr "الجذر"
#: any.pm:363 any.pm:385
#, c-format
msgid "Append"
msgstr "إلحاق"
#: any.pm:365 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "وضعية الفيديو"
#: any.pm:367
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:368
#, c-format
msgid "Network profile"
msgstr "سجلّ إعداد الشبكة "
#: any.pm:377 any.pm:382 any.pm:384
#, c-format
msgid "Label"
msgstr "تسمية"
#: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "افتراضي"
#: any.pm:386
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"
#: any.pm:388
#, c-format
msgid "NoVideo"
msgstr "لا فيديو"
#: any.pm:399
#, c-format
msgid "Empty label not allowed"
msgstr "لا يُسمح بالتسميات الفارغة"
#: any.pm:400
#, c-format
msgid "You must specify a kernel image"
msgstr "يجب تحديد صورة النواة"
#: any.pm:400
#, c-format
msgid "You must specify a root partition"
msgstr "يجب تحديد تجزيء جذر"
#: any.pm:401
#, c-format
msgid "This label is already used"
msgstr "هذه التسمية مستخدمة مسبقا"
#: any.pm:415
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "ما نوع المدخل المُراد إضافته؟"
#: any.pm:416
#, c-format
msgid "Linux"
msgstr "لينكس"
#: any.pm:416
#, c-format
msgid "Other OS (SunOS...)"
msgstr "نظام تشغيل آخر (SunOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (MacOS...)"
msgstr "نظام تشغيل آخر (MacOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (Windows...)"
msgstr "نظام تشغيل آخر (ويندوز...)"
#: any.pm:445
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"هذه هي المدخلات المختلفة في قائمة الإقلاع حتى الآن.\n"
"يمكنك إضافة مدخلات أخرى أو تغيير الموجودة."
#: any.pm:592
#, c-format
msgid "access to X programs"
msgstr "الوصول إلى برامج X"
#: any.pm:593
#, c-format
msgid "access to rpm tools"
msgstr "الوصول إلى أدوات rpm"
#: any.pm:594
#, c-format
msgid "allow \"su\""
msgstr "السماح بـ\"su\""
#: any.pm:595
#, c-format
msgid "access to administrative files"
msgstr "الوصول إلى ملفات الإدارة"
#: any.pm:596
#, c-format
msgid "access to network tools"
msgstr "الوصول إلى أدوات الشبكة"
#: any.pm:597
#, c-format
msgid "access to compilation tools"
msgstr "الوصول إلى أدوات التجميع"
#: any.pm:602
#, c-format
msgid "(already added %s)"
msgstr "(تمت إضافة %s مسبقا)"
#: any.pm:607
#, c-format
msgid "This password is too simple"
msgstr "كلمة المرور هذه بسيطة جداً"
#: any.pm:608
#, c-format
msgid "Please give a user name"
msgstr "الرجاء إعطاء اسم مستخدم"
#: any.pm:609
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "اسم المستخدم يجب أن يحتوي فقط على الحروف الصغيرة، والأرقام، و`-' و `_'"
#: any.pm:610
#, c-format
msgid "The user name is too long"
msgstr "اسم المستخدم طويل جداً"
#: any.pm:611
#, c-format
msgid "This user name has already been added"
msgstr "اسم المستخدم مُضاف مسبقا"
#: any.pm:615
#, c-format
msgid "Add user"
msgstr "إضافة مستخدم"
#: any.pm:616
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"إدخال مستخدم\n"
"%s"
#: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
|