# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-03-26 22:23-0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: drakauth:24 drakauth:26 draksec:164 #, c-format msgid "Authentication" msgstr "" #: drakauth:37 drakclock:111 drakclock:125 drakdvb:74 drakfont:213 #: drakfont:226 drakfont:264 draksplash:202 finish-install:119 logdrake:170 #: logdrake:445 logdrake:450 scannerdrake:59 scannerdrake:101 scannerdrake:142 #: scannerdrake:200 scannerdrake:259 scannerdrake:729 scannerdrake:740 #: scannerdrake:879 scannerdrake:890 scannerdrake:960 #, c-format msgid "Error" msgstr "" #: drakboot:53 #, c-format msgid "No bootloader found, creating a new configuration" msgstr "" #: drakboot:88 harddrake2:198 harddrake2:199 logdrake:71 #, c-format msgid "/_File" msgstr "" #: drakboot:89 logdrake:77 #, c-format msgid "/File/_Quit" msgstr "" #: drakboot:89 harddrake2:199 logdrake:77 #, c-format msgid "<control>Q" msgstr "" #: drakboot:129 #, c-format msgid "Text only" msgstr "" #: drakboot:130 #, c-format msgid "Verbose" msgstr "" #: drakboot:131 #, c-format msgid "Silent" msgstr "" #: drakboot:137 drakbug:260 drakdvb:57 drakfont:682 drakperm:376 drakperm:386 #: drakups:27 harddrake2:527 localedrake:43 notify-x11-free-driver-switch:15 #: scannerdrake:51 scannerdrake:54 scannerdrake:297 scannerdrake:302 #: scannerdrake:954 #, c-format msgid "Warning" msgstr "" #: drakboot:138 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: drakboot:139 #, c-format msgid "Do you want to configure it now?" msgstr "" #: drakboot:148 #, c-format msgid "Install themes" msgstr "" #: drakboot:150 #, c-format msgid "Graphical boot theme selection" msgstr "" #: drakboot:153 #, c-format msgid "Graphical boot mode:" msgstr "" #: drakboot:155 #, c-format msgid "Theme" msgstr "" #: drakboot:158 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: drakboot:163 draksplash:26 #, c-format msgid "Create new theme" msgstr "" #: drakboot:195 #, c-format msgid "Default user" msgstr "" #: drakboot:196 #, c-format msgid "Default desktop" msgstr "" #: drakboot:199 #, c-format msgid "No, I do not want autologin" msgstr "" #: drakboot:200 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: drakboot:207 #, c-format msgid "System mode" msgstr "" #: drakboot:210 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: drakboot:262 #, c-format msgid "Boot Style Configuration" msgstr "" #: drakboot:264 drakboot:268 #, c-format msgid "Video mode" msgstr "" #: drakboot:265 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: drakbug:65 drakbug:152 #, c-format msgid "The \"%s\" program has crashed with the following error:" msgstr "" #: drakbug:76 #, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "" #: drakbug:81 #, c-format msgid "Mandriva Linux Control Center" msgstr "" #: drakbug:82 #, c-format msgid "First Time Wizard" msgstr "" #: drakbug:83 #, c-format msgid "Synchronization tool" msgstr "" #: drakbug:84 drakbug:216 #, c-format msgid "Standalone Tools" msgstr "" #: drakbug:86 drakbug:87 #, c-format msgid "Mandriva Online" msgstr "" #: drakbug:88 #, c-format msgid "Remote Control" msgstr "" #: drakbug:89 #, c-format msgid "Software Manager" msgstr "" #: drakbug:90 #, c-format msgid "Windows Migration tool" msgstr "" #: drakbug:91 #, c-format msgid "Configuration Wizards" msgstr "" #: drakbug:113 #, c-format msgid "Select Mandriva Tool:" msgstr "" #: drakbug:114 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: drakbug:117 #, c-format msgid "Find Package" msgstr "" #: drakbug:119 #, c-format msgid "Package: " msgstr "" #: drakbug:120 #, c-format msgid "Kernel:" msgstr "" #: drakbug:151 #, c-format msgid "The \"%s\" program has segfaulted with the following error:" msgstr "" #: drakbug:155 #, c-format msgid "Its GDB trace is:" msgstr "" #: drakbug:158 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server" msgstr "" #: drakbug:160 #, c-format msgid "" "It would be very useful to attach to your report the output of the following " "command: %s." msgid_plural "" "Things useful to attach to your report are the output of the following " "commands: %s." msgstr[0] "" msgstr[1] "" #: drakbug:163 #, c-format msgid "'%s'" msgstr "" #: drakbug:166 #, c-format msgid "You should also attach the following files: %s as well as %s." msgstr "" #: drakbug:173 #, c-format msgid "Please describe what you were doing when it crashed:" msgstr "" #: drakbug:185 drakperm:136 #, c-format msgid "Help" msgstr "" #: drakbug:189 #, c-format msgid "Report" msgstr "" #: drakbug:190 drakfont:506 #, c-format msgid "Close" msgstr "" #: drakbug:223 #, c-format msgid "Not installed" msgstr "" #: drakbug:236 #, c-format msgid "Package not installed" msgstr "" #: drakbug:261 #, c-format msgid "" "You must type in what you were doing when this bug happened in order to " "enable us to reproduce this bug and to increase the odds of fixing it" msgstr "" #: drakbug:262 #, c-format msgid "Thanks." msgstr "" #: drakclock:30 draksec:170 #, c-format msgid "Date, Clock & Time Zone Settings" msgstr "" #: drakclock:39 #, c-format msgid "not defined" msgstr "" #: drakclock:41 #, c-format msgid "Change Time Zone" msgstr "" #: drakclock:44 #, c-format msgid "Timezone - DrakClock" msgstr "" #: drakclock:44 #, c-format msgid "Which is your timezone?" msgstr "" #: drakclock:45 #, c-format msgid "GMT - DrakClock" msgstr "" #: drakclock:45 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "" #: drakclock:70 #, c-format msgid "Network Time Protocol" msgstr "" #: drakclock:72 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: drakclock:73 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: drakclock:81 #, c-format msgid "Server:" msgstr "" #: drakclock:95 #, c-format msgid "Timezone" msgstr "" #: drakclock:111 #, c-format msgid "Please enter a valid NTP server address." msgstr "" #: drakclock:126 #, c-format msgid "Could not synchronize with %s." msgstr "" #: drakclock:127 drakdvb:149 draksplash:125 logdrake:175 scannerdrake:491 #, c-format msgid "Quit" msgstr "" #: drakclock:128 #, c-format msgid "Retry" msgstr "" #: drakclock:151 drakclock:161 #, c-format msgid "Reset" msgstr "" #: drakdvb:30 #, c-format msgid "DVB" msgstr "" #: drakdvb:39 harddrake2:101 #, c-format msgid "Channel" msgstr "" #: drakdvb:57 #, c-format msgid "%s already exists and its contents will be lost" msgstr "" #: drakdvb:74 #, c-format msgid "Could not get the list of available channels" msgstr "" #: drakdvb:80 draksec:73 drakups:99 harddrake2:381 scannerdrake:66 #: scannerdrake:70 scannerdrake:78 scannerdrake:319 scannerdrake:368 #: scannerdrake:504 scannerdrake:508 scannerdrake:530 service_harddrake:264 #, c-format msgid "Please wait" msgstr "" #: drakdvb:84 #, c-format msgid "Detecting DVB channels, this will take a few minutes" msgstr "" #: drakdvb:85 drakfont:572 drakfont:652 drakfont:736 draksplash:213 #: drakups:217 logdrake:175 #, c-format msgid "Cancel" msgstr "" #: drakdvb:148 #, c-format msgid "Detect Channels" msgstr "" #: drakdvb:150 #, c-format msgid "View Channel" msgstr "" #: drakedm:41 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: drakedm:42 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: drakedm:43 #, c-format msgid "XDM (X Display Manager)" msgstr "" #: drakedm:54 #, c-format msgid "Choosing a display manager" msgstr "" #: drakedm:55 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: drakedm:74 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "" #: drakedm:75 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: drakfont:187 #, c-format msgid "Search installed fonts" msgstr "" #: drakfont:189 #, c-format msgid "Unselect fonts installed" msgstr "" #: drakfont:213 #, c-format msgid "No fonts found" msgstr "" #: drakfont:217 #, c-format msgid "parse all fonts" msgstr "" #: drakfont:222 drakfont:263 drakfont:338 drakfont:379 drakfont:383 #: drakfont:409 drakfont:427 drakfont:435 #, c-format msgid "done" msgstr "" #: drakfont:226 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" #: drakfont:261 #, c-format msgid "Reselect correct fonts" msgstr "" #: drakfont:264 #, c-format msgid "Could not find any font.\n" msgstr "" #: drakfont:274 #, c-format msgid "Search for fonts in installed list" msgstr "" #: drakfont:298 #, c-format msgid "%s fonts conversion" msgstr "" #: drakfont:336 #, c-format msgid "Fonts copy" msgstr "" #: drakfont:339 #, c-format msgid "True Type fonts installation" msgstr "" #: drakfont:347 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: drakfont:348 #, c-format msgid "True Type install done" msgstr "" #: drakfont:354 drakfont:369 #, c-format msgid "type1inst building" msgstr "" #: drakfont:363 #, c-format msgid "Ghostscript referencing" msgstr "" #: drakfont:380 #, c-format msgid "Suppress Temporary Files" msgstr "" #: drakfont:425 drakfont:431 #, c-format msgid "Suppress Fonts Files" msgstr "" #: drakfont:439 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: drakfont:478 #, c-format msgid "Font Installation" msgstr "" #: drakfont:489 #, c-format msgid "DrakFont" msgstr "" #: drakfont:490 drakfont:642 #, c-format msgid "Font List" msgstr "" #: drakfont:493 #, c-format msgid "Get Windows Fonts" msgstr "" #: drakfont:499 #, c-format msgid "About" msgstr "" #: drakfont:500 drakfont:541 #, c-format msgid "Options" msgstr "" #: drakfont:501 drakfont:721 #, c-format msgid "Uninstall" msgstr "" #: drakfont:502 #, c-format msgid "Import" msgstr "" #: drakfont:520 #, c-format msgid "Drakfont" msgstr "" #: drakfont:522 harddrake2:236 #, c-format msgid "Copyright (C) %s by Mandriva" msgstr "" #: drakfont:524 #, c-format msgid "Font installer." msgstr "" #: drakfont:526 harddrake2:240 #, c-format msgid "Mandriva Linux" msgstr "" #. -PO: put here name(s) and email(s) of translator(s) (eg: "John Smith <jsmith@nowhere.com>") #. -PO: put here name(s) and email(s) of translator(s) (eg: "John Smith <jsmith@nowhere.com>") #: drakfont:533 harddrake2:245 #, c-format msgid "_: Translator(s) name(s) & email(s)\n" msgstr "" #: drakfont:543 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: drakfont:554 #, c-format msgid "Ghostscript" msgstr "" #: drakfont:555 #, c-format msgid "OpenOffice.org" msgstr "" #: drakfont:556 #, c-format msgid "Abiword" msgstr "" #: drakfont:557 #, c-format msgid "Generic Printers" msgstr "" #: drakfont:562 drakfont:572 draksplash:213 drakups:210 #, c-format msgid "Ok" msgstr "" #: drakfont:571 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: drakfont:572 #, c-format msgid "File Selection" msgstr "" #: drakfont:576 #, c-format msgid "Fonts" msgstr "" #: drakfont:640 draksec:166 #, c-format msgid "Import fonts" msgstr "" #: drakfont:646 drakups:299 drakups:361 drakups:381 #, c-format msgid "Add" msgstr "" #: drakfont:647 drakfont:735 drakups:301 drakups:363 drakups:383 #, c-format msgid "Remove" msgstr "" #: drakfont:653 #, c-format msgid "Install" msgstr "" #: drakfont:684 #, c-format msgid "Are you sure you want to uninstall the following fonts?" msgstr "" #: drakfont:688 draksec:60 harddrake2:326 #, c-format msgid "Yes" msgstr "" #: drakfont:690 draksec:59 harddrake2:327 #, c-format msgid "No" msgstr "" #: drakfont:729 #, c-format msgid "Unselect All" msgstr "" #: drakfont:732 #, c-format msgid "Select All" msgstr "" #: drakfont:749 #, c-format msgid "Importing fonts" msgstr "" #: drakfont:753 drakfont:773 #, c-format msgid "Initial tests" msgstr "" #: drakfont:754 #, c-format msgid "Copy fonts on your system" msgstr "" #: drakfont:755 #, c-format msgid "Install & convert Fonts" msgstr "" #: drakfont:756 #, c-format msgid "Post Install" msgstr "" #: drakfont:768 #, c-format msgid "Removing fonts" msgstr "" #: drakfont:774 #, c-format msgid "Remove fonts on your system" msgstr "" #: drakfont:775 #, c-format msgid "Post Uninstall" msgstr "" #: drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) %s Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: drakhelp:23 #, c-format msgid "" " --id <id_label> - load the html help page which refers to id_label\n" msgstr "" #: drakhelp:24 #, c-format msgid "" " --doc <link> - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: drakhelp:52 #, c-format msgid "Mandriva Linux Help Center" msgstr "" #: drakhelp:52 #, c-format msgid "No Help entry for %s\n" msgstr "" #: drakperm:23 #, c-format msgid "System settings" msgstr "" #: drakperm:24 #, c-format msgid "Custom settings" msgstr "" #: drakperm:25 #, c-format msgid "Custom & system settings" msgstr "" #: drakperm:33 #, c-format msgid "Security Permissions" msgstr "" #: drakperm:45 #, c-format msgid "Editable" msgstr "" #: drakperm:50 drakperm:320 #, c-format msgid "Path" msgstr "" #: drakperm:50 drakperm:249 #, c-format msgid "User" msgstr "" #: drakperm:50 drakperm:249 #, c-format msgid "Group" msgstr "" #: drakperm:50 drakperm:109 drakperm:332 draksec:181 #, c-format msgid "Permissions" msgstr "" #: drakperm:60 #, c-format msgid "Add a new rule" msgstr "" #: drakperm:67 drakperm:102 drakperm:128 #, c-format msgid "Edit current rule" msgstr "" #: drakperm:110 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: drakperm:112 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: drakperm:124 #, c-format msgid "Up" msgstr "" #: drakperm:124 #, c-format msgid "Move selected rule up one level" msgstr "" #: drakperm:125 #, c-format msgid "Down" msgstr "" #: drakperm:125 #, c-format msgid "Move selected rule down one level" msgstr "" #: drakperm:126 #, c-format msgid "Add a rule" msgstr "" #: drakperm:126 #, c-format msgid "Add a new rule at the end" msgstr "" #: drakperm:127 #, c-format msgid "Delete" msgstr "" #: drakperm:127 #, c-format msgid "Delete selected rule" msgstr "" #: drakperm:128 drakups:300 drakups:362 drakups:382 #, c-format msgid "Edit" msgstr "" #: drakperm:241 #, c-format msgid "browse" msgstr "" #: drakperm:246 #, c-format msgid "user" msgstr "" #: drakperm:246 #, c-format msgid "group" msgstr "" #: drakperm:246 #, c-format msgid "other" msgstr "" #: drakperm:249 #, c-format msgid "Other" msgstr "" #: drakperm:251 #, c-format msgid "Read" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: drakperm:254 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: drakperm:258 #, c-format msgid "Write" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: drakperm:261 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: drakperm:265 #, c-format msgid "Execute" msgstr "" #. -PO: here %s will be either "user", "group" or "other" #: drakperm:268 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: drakperm:271 #, c-format msgid "Sticky-bit" msgstr "" #: drakperm:271 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: drakperm:272 #, c-format msgid "Set-UID" msgstr "" #: drakperm:272 #, c-format msgid "Use owner id for execution" msgstr "" #: drakperm:273 #, c-format msgid "Set-GID" msgstr "" #: drakperm:273 #, c-format msgid "Use group id for execution" msgstr "" #: drakperm:290 #, c-format msgid "User:" msgstr "" #: drakperm:291 #, c-format msgid "Group:" msgstr "" #: drakperm:295 #, c-format msgid "Current user" msgstr "" #: drakperm:296 #, c-format msgid "When checked, owner and group will not be changed" msgstr "" #: drakperm:306 #, c-format msgid "Path selection" msgstr "" #: drakperm:326 #, c-format msgid "Property" msgstr "" #: drakperm:376 #, c-format msgid "" "The first character of the path must be a slash (\"/\"):\n" "\"%s\"" msgstr "" #: drakperm:386 #, c-format msgid "Both the username and the group must valid!" msgstr "" #: drakperm:387 #, c-format msgid "User: %s" msgstr "" #: drakperm:388 #, c-format msgid "Group: %s" msgstr "" #: draksec:54 #, c-format msgid "ALL" msgstr "" #: draksec:55 #, c-format msgid "LOCAL" msgstr "" #: draksec:56 #, c-format msgid "NONE" msgstr "" #: draksec:57 #, c-format msgid "Default" msgstr "" #: draksec:58 #, c-format msgid "Ignore" msgstr "" #: draksec:91 #, c-format msgid "Security Level and Checks" msgstr "" #: draksec:114 #, c-format msgid "Configure authentication required to access Mandriva tools" msgstr "" #: draksec:117 #, c-format msgid "No password" msgstr "" #: draksec:118 #, c-format msgid "Root password" msgstr "" #: draksec:119 #, c-format msgid "User password" msgstr "" #: draksec:149 draksec:204 #, c-format msgid "Software Management" msgstr "" #: draksec:150 #, c-format msgid "Mandriva Update" msgstr "" #: draksec:151 #, c-format msgid "Software Media Manager" msgstr "" #: draksec:152 #, c-format msgid "Configure 3D Desktop effects" msgstr "" #: draksec:153 #, c-format msgid "Graphical Server Configuration" msgstr "" #: draksec:154 #, c-format msgid "Mouse Configuration" msgstr "" #: draksec:155 #, c-format msgid "Keyboard Configuration" msgstr "" #: draksec:156 #, c-format msgid "UPS Configuration" msgstr "" #: draksec:157 #, c-format msgid "Network Configuration" msgstr "" #: draksec:158 #, c-format msgid "Hosts definitions" msgstr "" #: draksec:159 #, c-format msgid "Network Center" msgstr "" #: draksec:160 #, c-format msgid "Wireless Network Roaming" msgstr "" #: draksec:161 #, c-format msgid "VPN" msgstr "" #: draksec:162 #, c-format msgid "Proxy Configuration" msgstr "" #: draksec:163 #, c-format msgid "Connection Sharing" msgstr "" #: draksec:165 #, c-format msgid "Backups" msgstr "" #: draksec:167 logdrake:52 #, c-format msgid "Logs" msgstr "" #: draksec:168 #, c-format msgid "Services" msgstr "" #: draksec:169 #, c-format msgid "Users" msgstr "" #: draksec:171 #, c-format msgid "Boot Configuration" msgstr "" #: draksec:205 #, c-format msgid "Hardware" msgstr "" #: draksec:206 #, c-format msgid "Network" msgstr "" #: draksec:207 #, c-format msgid "System" msgstr "" #: draksec:208 #, c-format msgid "Boot" msgstr "" #: draksound:48 #, c-format msgid "No Sound Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: draksound:51 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: draksound:58 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" #: draksplash:33 #, c-format msgid "X coordinate of text box" msgstr "" #: draksplash:34 #, c-format msgid "Y coordinate of text box" msgstr "" #: draksplash:35 #, c-format msgid "Text box width" msgstr "" #: draksplash:36 #, c-format msgid "Text box height" msgstr "" #: draksplash:37 #, c-format msgid "" "The progress bar X coordinate\n" "of its upper left corner" msgstr "" #: draksplash:38 #, c-format msgid "" "The progress bar Y coordinate\n" "of its upper left corner" msgstr "" #: draksplash:39 #, c-format msgid "The width of the progress bar" msgstr "" #: draksplash:40 #, c-format msgid "The height of the progress bar" msgstr "" #: draksplash:41 #, c-format msgid "X coordinate of the text" msgstr "" #: draksplash:42 #, c-format msgid "Y coordinate of the text" msgstr "" #: draksplash:43 #, c-format msgid "Text box transparency" msgstr "" #: draksplash:44 #, c-format msgid "Progress box transparency" msgstr "" #: draksplash:45 #, c-format msgid "Text size" msgstr "" #: draksplash:62 #, c-format msgid "Progress Bar" msgstr "" #: draksplash:65 #, c-format msgid "Choose progress bar color 1" msgstr "" #: draksplash:67 #, c-format msgid "Choose progress bar color 2" msgstr "" #: draksplash:69 #, c-format msgid "Choose progress bar background" msgstr "" #: draksplash:72 #, c-format msgid "Gradient type" msgstr "" #: draksplash:78 #, c-format msgid "Text" msgstr "" #: draksplash:80 #, c-format msgid "Choose text color" msgstr "" #: draksplash:83 draksplash:102 #, c-format msgid "Choose picture" msgstr "" #: draksplash:87 #, c-format msgid "Silent bootsplash" msgstr "" #: draksplash:90 #, c-format msgid "Choose text zone color" msgstr "" #: draksplash:93 #, c-format msgid "Text color" msgstr "" #: draksplash:97 #, c-format msgid "Background color" msgstr "" #: draksplash:103 #, c-format msgid "Verbose bootsplash" msgstr "" #: draksplash:110 #, c-format msgid "Theme name" msgstr "" #: draksplash:115 #, c-format msgid "Final resolution" msgstr "" #: draksplash:119 #, c-format msgid "Display logo on Console" msgstr "" #: draksplash:124 #, c-format msgid "Save theme" msgstr "" #: draksplash:187 #, c-format msgid "Please enter a theme name" msgstr "" #: draksplash:190 #, c-format msgid "Please select a splash image" msgstr "" #: draksplash:193 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: draksplash:202 #, c-format msgid "Unable to load image file %s" msgstr "" #: draksplash:213 #, c-format msgid "choose image" msgstr "" #: draksplash:228 #, c-format msgid "Color selection" msgstr "" #: drakups:71 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: drakups:72 #, c-format msgid "Manual configuration" msgstr "" #: drakups:78 #, c-format msgid "Add an UPS device" msgstr "" #: drakups:81 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" #: drakups:88 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: drakups:91 #, c-format msgid "Autodetection" msgstr "" #: drakups:99 harddrake2:381 #, c-format msgid "Detection in progress" msgstr "" #: drakups:118 drakups:157 logdrake:457 logdrake:463 #, c-format msgid "Congratulations" msgstr "" #: drakups:119 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: drakups:121 #, c-format msgid "No new UPS devices was found" msgstr "" #: drakups:126 drakups:138 #, c-format msgid "UPS driver configuration" msgstr "" #: drakups:126 #, c-format msgid "Please select your UPS model." msgstr "" #: drakups:127 #, c-format msgid "Manufacturer / Model:" msgstr "" #: drakups:138 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: drakups:143 #, c-format msgid "Name:" msgstr "" #: drakups:143 #, c-format msgid "The name of your ups" msgstr "" #: drakups:144 #, c-format msgid "Driver:" msgstr "" #: drakups:144 #, c-format msgid "The driver that manages your ups" msgstr "" #: drakups:145 #, c-format msgid "Port:" msgstr "" #: drakups:147 #, c-format msgid "The port on which is connected your ups" msgstr "" #: drakups:157 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: drakups:248 #, c-format msgid "UPS devices" msgstr "" #: drakups:249 drakups:268 drakups:284 harddrake2:89 harddrake2:115 #: harddrake2:122 #, c-format msgid "Name" msgstr "" #: drakups:249 harddrake2:137 #, c-format msgid "Driver" msgstr "" #: drakups:249 harddrake2:55 #, c-format msgid "Port" msgstr "" #: drakups:267 #, c-format msgid "UPS users" msgstr "" #: drakups:283 #, c-format msgid "Access Control Lists" msgstr "" #: drakups:284 #, c-format msgid "IP address" msgstr "" #: drakups:284 #, c-format msgid "IP mask" msgstr "" #: drakups:296 #, c-format msgid "Rules" msgstr "" #: drakups:297 #, c-format msgid "Action" msgstr "" #: drakups:297 harddrake2:86 #, c-format msgid "Level" msgstr "" #: drakups:297 #, c-format msgid "ACL name" msgstr "" #: drakups:297 finish-install:179 #, c-format msgid "Password" msgstr "" #: drakups:329 #, c-format msgid "UPS Management" msgstr "" #: drakups:333 drakups:342 #, c-format msgid "DrakUPS" msgstr "" #: drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "" #: drakxtv:67 #, c-format msgid "No TV Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: drakxtv:69 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: finish-install:56 #, c-format msgid "Keyboard" msgstr "" #: finish-install:57 #, c-format msgid "Please, choose your keyboard layout." msgstr "" #: finish-install:177 finish-install:195 finish-install:207 #, c-format msgid "Encrypted home partition" msgstr "" #: finish-install:177 #, c-format msgid "Please enter a password for the %s user" msgstr "" #: finish-install:180 #, c-format msgid "Password (again)" msgstr "" #: finish-install:195 #, c-format msgid "Creating encrypted home partition" msgstr "" #: finish-install:207 #, c-format msgid "Formatting encrypted home partition" msgstr "" #: harddrake2:29 #, c-format msgid "Alternative drivers" msgstr "" #: harddrake2:30 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: harddrake2:32 harddrake2:124 #, c-format msgid "Bus" msgstr "" #: harddrake2:33 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: harddrake2:35 harddrake2:150 #, c-format msgid "Bus identification" msgstr "" #: harddrake2:36 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: harddrake2:38 #, c-format msgid "Location on the bus" msgstr "" #: harddrake2:39 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: harddrake2:42 #, c-format msgid "Drive capacity" msgstr "" #: harddrake2:42 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: harddrake2:43 #, c-format msgid "Description" msgstr "" #: harddrake2:43 #, c-format msgid "this field describes the device" msgstr "" #: harddrake2:44 #, c-format msgid "Old device file" msgstr "" #: harddrake2:45 #, c-format msgid "old static device name used in dev package" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: harddrake2:48 #, c-format msgid "Module" msgstr "" #: harddrake2:48 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: harddrake2:49 #, c-format msgid "Extended partitions" msgstr "" #: harddrake2:49 #, c-format msgid "the number of extended partitions" msgstr "" #: harddrake2:50 #, c-format msgid "Geometry" msgstr "" #: harddrake2:50 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: harddrake2:51 #, c-format msgid "Disk controller" msgstr "" #: harddrake2:51 #, c-format msgid "the disk controller on the host side" msgstr "" #: harddrake2:52 #, c-format msgid "Identifier" msgstr "" #: harddrake2:52 #, c-format msgid "usually the device serial number" msgstr "" #: harddrake2:53 #, c-format msgid "Media class" msgstr "" #: harddrake2:53 #, c-format msgid "class of hardware device" msgstr "" #: harddrake2:54 harddrake2:87 #, c-format msgid "Model" msgstr "" #: harddrake2:54 #, c-format msgid "hard disk model" msgstr "" #: harddrake2:55 #, c-format msgid "network printer port" msgstr "" #: harddrake2:56 #, c-format msgid "Primary partitions" msgstr "" #: harddrake2:56 #, c-format msgid "the number of the primary partitions" msgstr "" #: harddrake2:57 harddrake2:92 #, c-format msgid "Vendor" msgstr "" #: harddrake2:57 #, c-format msgid "the vendor name of the device" msgstr "" #: harddrake2:58 #, c-format msgid "PCI domain" msgstr "" #: harddrake2:58 #, c-format msgid "the PCI domain of the device" msgstr "" #: harddrake2:59 #, c-format msgid "Bus PCI #" msgstr "" #: harddrake2:59 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "" #: harddrake2:60 #, c-format msgid "PCI device #" msgstr "" #: harddrake2:60 #, c-format msgid "PCI device number" msgstr "" #: harddrake2:61 #, c-format msgid "PCI function #" msgstr "" #: harddrake2:61 #, c-format msgid "PCI function number" msgstr "" #: harddrake2:62 #, c-format msgid "Vendor ID" msgstr "" #: harddrake2:62 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: harddrake2:63 #, c-format msgid "Device ID" msgstr "" #: harddrake2:63 #, c-format msgid "this is the numerical identifier of the device" msgstr "" #: harddrake2:64 #, c-format msgid "Sub vendor ID" msgstr "" #: harddrake2:64 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: harddrake2:65 #, c-format msgid "Sub device ID" msgstr "" #: harddrake2:65 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "" #: harddrake2:66 #, c-format msgid "Device USB ID" msgstr "" #: harddrake2:66 #, c-format msgid ".." msgstr "" #: harddrake2:70 #, c-format msgid "Bogomips" msgstr "" #: harddrake2:70 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: harddrake2:71 #, c-format msgid "Cache size" msgstr "" #: harddrake2:71 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: harddrake2:74 #, c-format msgid "Coma bug" msgstr "" #: harddrake2:74 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: harddrake2:75 #, c-format msgid "Cpuid family" msgstr "" #: harddrake2:75 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: harddrake2:76 #, c-format msgid "Cpuid level" msgstr "" #: harddrake2:76 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: harddrake2:77 #, c-format msgid "Frequency (MHz)" msgstr "" #: harddrake2:77 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: harddrake2:78 #, c-format msgid "Flags" msgstr "" #: harddrake2:78 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: harddrake2:79 #, c-format msgid "Fdiv bug" msgstr "" #: harddrake2:80 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: harddrake2:81 #, c-format msgid "Is FPU present" msgstr "" #: harddrake2:81 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: harddrake2:82 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: harddrake2:82 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: harddrake2:83 #, c-format msgid "F00f bug" msgstr "" #: harddrake2:83 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: harddrake2:84 #, c-format msgid "Halt bug" msgstr "" #: harddrake2:85 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: harddrake2:86 #, c-format msgid "sub generation of the cpu" msgstr "" #: harddrake2:87 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "" #: harddrake2:88 #, c-format msgid "Model name" msgstr "" #: harddrake2:88 #, c-format msgid "official vendor name of the cpu" msgstr "" #: harddrake2:89 #, c-format msgid "the name of the CPU" msgstr "" #: harddrake2:90 #, c-format msgid "Processor ID" msgstr "" #: harddrake2:90 #, c-format msgid "the number of the processor" msgstr "" #: harddrake2:91 #, c-format msgid "Model stepping" msgstr "" #: harddrake2:91 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: harddrake2:92 #, c-format msgid "the vendor name of the processor" msgstr "" #: harddrake2:93 #, c-format msgid "Write protection" msgstr "" #: harddrake2:93 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: harddrake2:97 #, c-format msgid "Floppy format" msgstr "" #: harddrake2:97 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: harddrake2:101 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: harddrake2:102 #, c-format msgid "Disk identifier" msgstr "" #: harddrake2:102 #, c-format msgid "usually the disk serial number" msgstr "" #: harddrake2:103 #, c-format msgid "Logical unit number" msgstr "" #: harddrake2:103 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: harddrake2:110 #, c-format msgid "Installed size" msgstr "" #: harddrake2:110 #, c-format msgid "Installed size of the memory bank" msgstr "" #: harddrake2:111 #, c-format msgid "Enabled Size" msgstr "" #: harddrake2:111 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: harddrake2:112 harddrake2:121 #, c-format msgid "Type" msgstr "" #: harddrake2:112 #, c-format msgid "type of the memory device" msgstr "" #: harddrake2:113 #, c-format msgid "Speed" msgstr "" #: harddrake2:113 #, c-format msgid "Speed of the memory bank" msgstr "" #: harddrake2:114 #, c-format msgid "Bank connections" msgstr "" #: harddrake2:115 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: harddrake2:119 #, c-format msgid "Device file" msgstr "" #: harddrake2:119 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: harddrake2:120 #, c-format msgid "Emulated wheel" msgstr "" #: harddrake2:120 #, c-format msgid "whether the wheel is emulated or not" msgstr "" #: harddrake2:121 #, c-format msgid "the type of the mouse" msgstr "" #: harddrake2:122 #, c-format msgid "the name of the mouse" msgstr "" #: harddrake2:123 #, c-format msgid "Number of buttons" msgstr "" #: harddrake2:123 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: harddrake2:124 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "" #: harddrake2:125 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: harddrake2:125 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: harddrake2:132 harddrake2:141 harddrake2:148 harddrake2:156 harddrake2:337 #, c-format msgid "Identification" msgstr "" #: harddrake2:133 harddrake2:149 #, c-format msgid "Connection" msgstr "" #: harddrake2:142 #, c-format msgid "Performances" msgstr "" #: harddrake2:143 #, c-format msgid "Bugs" msgstr "" #: harddrake2:144 #, c-format msgid "FPU" msgstr "" #: harddrake2:151 #, c-format msgid "Device" msgstr "" #: harddrake2:152 #, c-format msgid "Partitions" msgstr "" #: harddrake2:157 #, c-format msgid "Features" msgstr "" #. -PO: please keep all "/" characters !!! #: harddrake2:180 logdrake:78 #, c-format msgid "/_Options" msgstr "" #: harddrake2:181 harddrake2:210 logdrake:80 #, c-format msgid "/_Help" msgstr "" #: harddrake2:185 #, c-format msgid "/Autodetect _printers" msgstr "" #: harddrake2:186 #, c-format msgid "/Autodetect _modems" msgstr "" #: harddrake2:187 #, c-format msgid "/Autodetect _jaz drives" msgstr "" #: harddrake2:188 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: harddrake2:192 #, c-format msgid "Hardware Configuration" msgstr "" #: harddrake2:199 #, c-format msgid "/_Quit" msgstr "" #: harddrake2:212 #, c-format msgid "/_Fields description" msgstr "" #: harddrake2:214 #, c-format msgid "Harddrake help" msgstr "" #: harddrake2:215 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: harddrake2:223 #, c-format msgid "Select a device!" msgstr "" #: harddrake2:223 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: harddrake2:229 #, c-format msgid "/_Report Bug" msgstr "" #: harddrake2:231 #, c-format msgid "/_About..." msgstr "" #: harddrake2:234 #, c-format msgid "Harddrake" msgstr "" #: harddrake2:238 #, c-format msgid "This is HardDrake, a %s hardware configuration tool." msgstr "" #: harddrake2:271 #, c-format msgid "Detected hardware" msgstr "" #: harddrake2:274 scannerdrake:286 #, c-format msgid "Information" msgstr "" #: harddrake2:276 #, c-format msgid "Set current driver options" msgstr "" #: harddrake2:283 #, c-format msgid "Run config tool" msgstr "" #: harddrake2:303 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: harddrake2:324 notify-x11-free-driver-switch:13 #, c-format msgid "unknown" msgstr "" #: harddrake2:325 #, c-format msgid "Unknown" msgstr "" #: harddrake2:345 #, c-format msgid "Misc" msgstr "" #: harddrake2:429 #, c-format msgid "secondary" msgstr "" #: harddrake2:429 #, c-format msgid "primary" msgstr "" #: harddrake2:433 #, c-format msgid "burner" msgstr "" #: harddrake2:433 #, c-format msgid "DVD" msgstr "" #: harddrake2:485 #, c-format msgid "Unknown/Others" msgstr "" #: harddrake2:527 #, c-format msgid "The following packages need to be installed:\n" msgstr "" #: localedrake:38 #, c-format msgid "LocaleDrake" msgstr "" #: localedrake:44 #, c-format msgid "You should install the following packages: %s" msgstr "" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: localedrake:47 #, c-format msgid ", " msgstr "" #: logdrake:51 #, c-format msgid "Mandriva Linux Tools Logs" msgstr "" #: logdrake:65 #, c-format msgid "Show only for the selected day" msgstr "" #: logdrake:72 #, c-format msgid "/File/_New" msgstr "" #: logdrake:72 #, c-format msgid "<control>N" msgstr "" #: logdrake:73 #, c-format msgid "/File/_Open" msgstr "" #: logdrake:73 #, c-format msgid "<control>O" msgstr "" #: logdrake:74 #, c-format msgid "/File/_Save" msgstr "" #: logdrake:74 #, c-format msgid "<control>S" msgstr "" #: logdrake:75 #, c-format msgid "/File/Save _As" msgstr "" #: logdrake:76 #, c-format msgid "/File/-" msgstr "" #: logdrake:79 #, c-format msgid "/Options/Test" msgstr "" #: logdrake:81 #, c-format msgid "/Help/_About..." msgstr "" #: logdrake:110 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: logdrake:111 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: logdrake:112 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: logdrake:113 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: logdrake:117 #, c-format msgid "search" msgstr "" #: logdrake:129 #, c-format msgid "A tool to monitor your logs" msgstr "" #: logdrake:131 #, c-format msgid "Settings" msgstr "" #: logdrake:134 #, c-format msgid "Matching" msgstr "" #: logdrake:135 #, c-format msgid "but not matching" msgstr "" #: logdrake:138 #, c-format msgid "Choose file" msgstr "" #: logdrake:150 #, c-format msgid "Calendar" msgstr "" #: logdrake:159 #, c-format msgid "Content of the file" msgstr "" #: logdrake:163 logdrake:407 #, c-format msgid "Mail alert" msgstr "" #: logdrake:170 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: logdrake:174 #, c-format msgid "Save" msgstr "" #: logdrake:222 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: logdrake:244 #, c-format msgid "Sorry, log file isn't available!" msgstr "" #: logdrake:292 #, c-format msgid "Error while opening \"%s\" log file: %s\n" msgstr "" #: logdrake:385 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: logdrake:386 #, c-format msgid "Domain Name Resolver" msgstr "" #: logdrake:387 #, c-format msgid "Ftp Server" msgstr "" #: logdrake:388 #, c-format msgid "Postfix Mail Server" msgstr "" #: logdrake:389 #, c-format msgid "Samba Server" msgstr "" #: logdrake:390 #, c-format msgid "SSH Server" msgstr "" #: logdrake:391 #, c-format msgid "Webmin Service" msgstr "" #: logdrake:392 #, c-format msgid "Xinetd Service" msgstr "" #: logdrake:401 #, c-format msgid "Configure the mail alert system" msgstr "" #: logdrake:402 #, c-format msgid "Stop the mail alert system" msgstr "" #: logdrake:410 #, c-format msgid "Mail alert configuration" msgstr "" #: logdrake:411 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: logdrake:414 #, c-format msgid "What do you want to do?" msgstr "" #: logdrake:421 #, c-format msgid "Services settings" msgstr "" #: logdrake:422 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: logdrake:429 #, c-format msgid "Load setting" msgstr "" #: logdrake:430 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: logdrake:431 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: logdrake:436 #, c-format msgid "Alert configuration" msgstr "" #: logdrake:437 #, c-format msgid "Please enter your email address below " msgstr "" #: logdrake:438 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: logdrake:445 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: logdrake:450 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: logdrake:457 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: logdrake:463 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: logdrake:522 #, c-format msgid "Save as.." msgstr "" #: notify-x11-free-driver-switch:15 #, c-format msgid "" "The proprietary driver for your graphic card can not be found, the system is " "now using the free software driver (%s)." msgstr "" #: scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" #: scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "" #: scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: scannerdrake:67 scannerdrake:505 #, c-format msgid "Searching for configured scanners..." msgstr "" #: scannerdrake:71 scannerdrake:509 #, c-format msgid "Searching for new scanners..." msgstr "" #: scannerdrake:79 scannerdrake:531 #, c-format msgid "Re-generating list of configured scanners..." msgstr "" #: scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "" #: scannerdrake:104 scannerdrake:115 #, c-format msgid "Confirmation" msgstr "" #: scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "" #: scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: scannerdrake:130 #, c-format msgid "Scanner configuration" msgstr "" #: scannerdrake:131 #, c-format msgid "Select a scanner model (Detected model: %s, Port: %s)" msgstr "" #: scannerdrake:133 #, c-format msgid "Select a scanner model (Detected model: %s)" msgstr "" #: scannerdrake:134 #, c-format msgid "Select a scanner model (Port: %s)" msgstr "" #: scannerdrake:136 scannerdrake:139 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: scannerdrake:142 #, c-format msgid "The %s is not supported under Linux." msgstr "" #: scannerdrake:169 scannerdrake:183 #, c-format msgid "Do not install firmware file" msgstr "" #: scannerdrake:172 scannerdrake:222 #, c-format msgid "Scanner Firmware" msgstr "" #: scannerdrake:173 scannerdrake:225 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: scannerdrake:174 scannerdrake:226 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: scannerdrake:175 scannerdrake:229 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: scannerdrake:176 scannerdrake:230 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: scannerdrake:178 scannerdrake:237 #, c-format msgid "Install firmware file from" msgstr "" #: scannerdrake:180 scannerdrake:188 scannerdrake:239 scannerdrake:246 #, c-format msgid "CD-ROM" msgstr "" #: scannerdrake:181 scannerdrake:190 scannerdrake:240 scannerdrake:248 #, c-format msgid "Floppy Disk" msgstr "" #: scannerdrake:182 scannerdrake:192 scannerdrake:241 scannerdrake:250 #, c-format msgid "Other place" msgstr "" #: scannerdrake:198 #, c-format msgid "Select firmware file" msgstr "" #: scannerdrake:201 scannerdrake:260 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: scannerdrake:224 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: scannerdrake:228 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: scannerdrake:231 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: scannerdrake:233 #, c-format msgid "Install firmware for the" msgstr "" #: scannerdrake:256 #, c-format msgid "Select firmware file for the %s" msgstr "" #: scannerdrake:274 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "" #: scannerdrake:287 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: scannerdrake:297 #, c-format msgid "The %s is unsupported" msgstr "" #: scannerdrake:302 #, c-format msgid "" "The %s must be configured by system-config-printer.\n" "You can launch system-config-printer from the %s Control Center in Hardware " "section." msgstr "" #: scannerdrake:320 #, c-format msgid "Setting up kernel modules..." msgstr "" #: scannerdrake:330 scannerdrake:337 scannerdrake:367 #, c-format msgid "Auto-detect available ports" msgstr "" #: scannerdrake:331 scannerdrake:377 #, c-format msgid "Device choice" msgstr "" #: scannerdrake:332 scannerdrake:378 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: scannerdrake:333 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: scannerdrake:335 scannerdrake:380 #, c-format msgid "choose device" msgstr "" #: scannerdrake:369 #, c-format msgid "Searching for scanners..." msgstr "" #: scannerdrake:405 scannerdrake:412 #, c-format msgid "Attention!" msgstr "" #: scannerdrake:406 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: scannerdrake:407 scannerdrake:416 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: scannerdrake:409 scannerdrake:418 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" #: scannerdrake:413 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: scannerdrake:414 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: scannerdrake:415 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: scannerdrake:420 #, c-format msgid "Congratulations!" msgstr "" #: scannerdrake:421 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" #: scannerdrake:446 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" #: scannerdrake:447 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" #: scannerdrake:449 scannerdrake:452 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: scannerdrake:460 #, c-format msgid "Scanner Management" msgstr "" #: scannerdrake:466 #, c-format msgid "Search for new scanners" msgstr "" #: scannerdrake:472 #, c-format msgid "Add a scanner manually" msgstr "" #: scannerdrake:479 #, c-format msgid "Install/Update firmware files" msgstr "" #: scannerdrake:485 #, c-format msgid "Scanner sharing" msgstr "" #: scannerdrake:544 scannerdrake:709 #, c-format msgid "All remote machines" msgstr "" #: scannerdrake:556 scannerdrake:859 #, c-format msgid "This machine" msgstr "" #: scannerdrake:595 #, c-format msgid "Scanner Sharing" msgstr "" #: scannerdrake:596 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: scannerdrake:597 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: scannerdrake:600 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: scannerdrake:602 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: scannerdrake:607 scannerdrake:624 #, c-format msgid "No remote machines" msgstr "" #: scannerdrake:616 #, c-format msgid "Use scanners on remote computers" msgstr "" #: scannerdrake:619 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: scannerdrake:646 scannerdrake:718 scannerdrake:868 #, c-format msgid "Sharing of local scanners" msgstr "" #: scannerdrake:647 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: scannerdrake:658 scannerdrake:808 #, c-format msgid "Add host" msgstr "" #: scannerdrake:664 scannerdrake:814 #, c-format msgid "Edit selected host" msgstr "" #: scannerdrake:673 scannerdrake:823 #, c-format msgid "Remove selected host" msgstr "" #: scannerdrake:682 scannerdrake:832 #, c-format msgid "Done" msgstr "" #: scannerdrake:697 scannerdrake:705 scannerdrake:710 scannerdrake:756 #: scannerdrake:847 scannerdrake:855 scannerdrake:860 scannerdrake:906 #, c-format msgid "Name/IP address of host:" msgstr "" #: scannerdrake:719 scannerdrake:869 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: scannerdrake:730 scannerdrake:880 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "" #: scannerdrake:741 scannerdrake:891 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: scannerdrake:796 #, c-format msgid "Usage of remote scanners" msgstr "" #: scannerdrake:797 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: scannerdrake:954 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" #: scannerdrake:958 scannerdrake:962 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: scannerdrake:961 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: service_harddrake:134 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: service_harddrake:135 #, c-format msgid "- %s was removed\n" msgstr "" #: service_harddrake:138 #, c-format msgid "Some devices were added: %s\n" msgstr "" #: service_harddrake:139 #, c-format msgid "- %s was added\n" msgstr "" #: service_harddrake:264 #, c-format msgid "Hardware probing in progress" msgstr "" #: service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "" #: ../menu/localedrake-system.desktop.in.h:1 msgid "System Regional Settings" msgstr "" #: ../menu/localedrake-system.desktop.in.h:2 msgid "System wide language & country configurator" msgstr "" #: ../menu/harddrake.desktop.in.h:1 msgid "HardDrake" msgstr "" #: ../menu/harddrake.desktop.in.h:2 msgid "Hardware Central Configuration/information tool" msgstr "" #: ../menu/harddrake.desktop.in.h:3 msgid "Hardware Configuration Tool" msgstr "" #: ../menu/localedrake-user.desktop.in.h:1 msgid "Language & country configuration" msgstr "" #: ../menu/localedrake-user.desktop.in.h:2 msgid "Regional Settings" msgstr ""