# translation of DrakX.po to furlan
# Copyright (C) 2004 Free Software Foundation, Inc.
# Andrea Gracco <graccoandrea@tin.it>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-12-08 21:52+0800\n"
"PO-Revision-Date: 2004-06-28 17:41+0200\n"
"Last-Translator: Andrea Gracco <graccoandrea@tin.it>\n"
"Language-Team: furlan <gft@freelists.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"
#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Cuâle sorte di vôs vuelistu zontâ?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "No rivi a scrivi le clâf"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Torne a provâ"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Continue cence clâf USB"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Reboot"
msgstr "Torne a inviâ"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "O ai bisugne di une clâf par salvâ i toi dâts"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Cîr ancjemò le clâf USB"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "O imposti le clâf USB"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Par plasè spiete, o imposti i file di configurazion dal sisteme te clâf "
"USB..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Insede les tôs informazions di utent, le password e vignarâ doprade par il "
"screensaver"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Configurazion automatiche"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Par plasè spiete, o cîr e o configuri les periferichis..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
#: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:838 network/netconnect.pm:867
#: network/netconnect.pm:966 network/netconnect.pm:970
#: network/netconnect.pm:974 network/netconnect.pm:979
#: network/netconnect.pm:1124 network/netconnect.pm:1128
#: network/netconnect.pm:1247 network/netconnect.pm:1252
#: network/netconnect.pm:1272 network/netconnect.pm:1431
#: network/thirdparty.pm:321 network/thirdparty.pm:328
#: network/thirdparty.pm:372 network/thirdparty.pm:374
#: network/thirdparty.pm:395 network/thirdparty.pm:419
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
#: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451
#: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594
#: printer/printerdrake.pm:4714 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1581 standalone/drakTermServ:1589
#: standalone/drakTermServ:1594 standalone/drakTermServ:1602
#: standalone/drakTermServ:1618 standalone/drakTermServ:1638
#: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:66 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Fal"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Al è intravignût un fal, ma no sai ben cemût gjestîlu.\n"
"Continue a to azard."
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Al è intravignût un fal"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "RimĂ´f i file di configurazion dal sisteme"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Torne dome a inviâ"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Ferme chiscj programs"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1061 diskdrake/interactive.pm:1071
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Read carefully!"
msgstr "Lei cun atenzion!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB o di plui"
#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "Server X"
#: Xconfig/card.pm:163
#, c-format
msgid "Choose an X server"
msgstr "Sielç un server X"
#: Xconfig/card.pm:195
#, c-format
msgid "Multi-head configuration"
msgstr ""
#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
#: Xconfig/card.pm:265
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "No rivi a instalâ il pachet Xorg: %s"
#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Sielç le dimension de memorie de to schede video"
#: Xconfig/card.pm:372
#, c-format
msgid "Xorg configuration"
msgstr "Configurazion Xorg"
#: Xconfig/card.pm:374
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Cuâl configurazion di Xorg vuelistu vê?"
#: Xconfig/card.pm:407
#, c-format
msgid "Configure all heads independently"
msgstr ""
#: Xconfig/card.pm:408
#, c-format
msgid "Use Xinerama extension"
msgstr "Dopre estension Xinerama"
#: Xconfig/card.pm:413
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configure dome le schede \"%s\"%s"
#: Xconfig/card.pm:425 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:432 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s cun acelerazion 3D hardware"
#: Xconfig/card.pm:434
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Le to schede e po vĂŞ il sopuart pe acelerazion 3D cun Xorg %s."
#: Xconfig/card.pm:440
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s cun acelerazion 3D hardware sperimentâl"
#: Xconfig/card.pm:442
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Le to schede e po vĂŞ il sopuart pe acelerazion 3D hardware cun Xorg %s,\n"
"NOTE CHE CHEST AL E' UN SOPUART SPERIMENTĂ‚L E PO FERMĂ‚ IL TO COMPUTER."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975
#, c-format
msgid "Custom"
msgstr "Personalizât"
#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1328
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "JessĂ®"
#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Schede Grafiche"
#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "VisĂ´r"
#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Risoluzion"
#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Prove"
#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:493
#: standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Opzions"
#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"MantignĂ® i cambiaments?\n"
"Le configurazion in vore e je:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr ""
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Sielç un visôr"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr ""
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Gjeneric"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr ""
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr ""
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr ""
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 colĂ´rs (8 bit)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mîl colôrs (15 bit)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mîl colôrs (16 bit)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 milions di colĂ´rs (24 bit)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Risoluzions"
#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Altri"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Sielç le risoluzion e le fondece di colôr"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Schedis video: %s"
#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "Va ben"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431
#: install_steps_interactive.pm:836 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Scancele"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Jutori"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Prove de configurazion"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Vuelistu provâ le configurazion?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Avertence: le prove di cheste schede grafiche e podares blocâ il to computer"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Al è intravignût un fal:\n"
"%s\n"
"Prove a cambiâ cualchi parametri"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr ""
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Ise cheste le impostazion juste?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr ""
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Sorte di surie: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Periferiche de surie: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "VisĂ´r: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr ""
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr ""
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Schedis grafichis: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memorie de schede video: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Fondece di colĂ´r: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Risoluzion: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Driver Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Interface grafiche dal inviament"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr ""
#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:208
#, c-format
msgid "Please wait"
msgstr "Par plasè, spiete"
#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr ""
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prin setĂ´r dal disc (MBR)"
#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Prin setĂ´r de partizion lidrie"
#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "Su dischet"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "Salte"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalazion LILO/grub"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr ""
#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Configurazion dal stîl di inviament"
#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr ""
#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Insede le dimension de ram in MB"
#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Le password no corispuint"
#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1335
#, c-format
msgid "Please try again"
msgstr "Par plasè torne a provâ"
#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr ""
#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Dispositîf di inviament"
#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Ritart prin di inviâ le imagjin predefinide"
#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Abilite ACPI"
#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr ""
#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr ""
#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Password"
#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Password (ancjemò)"
#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr ""
#: any.pm:296
#, c-format
msgid "restrict"
msgstr ""
#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Nete /tmp a ducj i inviaments"
#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Dimension RAM juste se domandât (cjatâts %d MB)"
#: any.pm:309
#, c-format
msgid "Init Message"
msgstr ""
#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr ""
#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""
#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Abilite l'inviament di CD?"
#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr ""
#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "Sisteme Operatîf predefinît?"
#: any.pm:369
#, c-format
msgid "Image"
msgstr "Imagjin"
#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Lidrie"
#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Append"
#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Modalitât video"
#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:376
#, fuzzy, c-format
msgid "Network profile"
msgstr "Gnûf profîl..."
#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:449
#, c-format
msgid "Label"
msgstr "Etichete"
#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Predefinît"
#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Dimension Initrd"
#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "NoVideo"
#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Etichete vueide no permitude"
#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Tu âs di specificâ une imagjin kernel"
#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Tu âs di specificâ une partizion lidrie"
#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Le etichete e je dizĂ in vore"
#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Cuâle sorte di vôs vuelistu zontâ?"
#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Altri sisteme operatîf (SunOS...)"
#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Altri sisteme operatîf (MacOS...)"
#: any.pm:425
#, fuzzy, c-format
msgid "Other OS (Windows...)"
msgstr "Altri sisteme operatîf (windows...)"
#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "acès ai programs X"
#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "acès ai imprescj rpm"
#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "permèt \"su\""
#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "acès ai file di aministrazion"
#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "acès ai imprescj di rêt"
#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "acès ai imprescj di compilazion"
#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(dizà zontât %s)"
#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Le password e je masse sempliç"
#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Par plasè, insede un non utent"
#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Il non utent al Ă di vĂŞ dome letaris minusculis, numars , `-' e `_'"
#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "Il non utent al è masse lunc"
#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Il non utent al è stât dizà zontât"
#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID Utent"
#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "ID Grop"
#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr ""
#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""
#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "Zonte utent"
#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Insede un utent\n"
"%s"
#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4987
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Fat"
#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Acete utent"
#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Non reâl"
#: any.pm:649 standalone/drakbackup:1634
#, c-format
msgid "Login name"
msgstr ""
#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Shell"
#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Icone"
#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Acès automatic"
#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "O pues impostâ il to computer par fâ acedi automatichementri un utent."
#: any.pm:705
#, fuzzy, c-format
msgid "Use this feature"
msgstr "Vuelistu doprâ cheste fature?"
#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Sielç un utent predefinît:"
#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Sielç il gjestôr grafic di doprâ:"
#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "Par plasè sielç une lenghe di doprâ."
#: any.pm:720 any.pm:788
#, fuzzy, c-format
msgid "Language choice"
msgstr "Lenghis"
#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr ""
#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Dopre Unicode sicu predefinît"
#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "Dutis les lenghis"
#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:957
#, c-format
msgid "Country / Region"
msgstr "Nazion / Regjon"
#: any.pm:844
#, c-format
msgid "Please choose your country."
msgstr "Par plasè sielç le to nazion."
#: any.pm:846
#, c-format
msgid "Here is the full list of available countries"
msgstr "Cheste e je le liste complete di dutis les nazions disponibilis"
#: any.pm:847
#, fuzzy, c-format
msgid "Other Countries"
msgstr "Un altri"
#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr ""
#: any.pm:855
#, c-format
msgid "Input method:"
msgstr ""
#: any.pm:858 install_any.pm:422 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1238 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "Nissun"
#: any.pm:975
#, c-format
msgid "No sharing"
msgstr "Nissune condivision"
#: any.pm:975
#, c-format
msgid "Allow all users"
msgstr "Permet ducj i utents"
#: any.pm:979
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
#: any.pm:991
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
#: any.pm:994
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
#: any.pm:1002
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
#: any.pm:1027
#, c-format
msgid "Launch userdrake"
msgstr "Invie userdrake"
#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5305 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Siere"
#: any.pm:1029
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:23
#, fuzzy, c-format
msgid "Local file"
msgstr "File locâi"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr ""
#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "Domini Windows"
#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr ""
#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr ""
#: authentication.pm:66
#, fuzzy, c-format
msgid "Local file:"
msgstr "File locâi:"
#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "Domini Windows:"
#: authentication.pm:69
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr ""
#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr ""
#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""
#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""
#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "Autenticazion LDAP"
#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr ""
#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "Server LDAP"
#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr ""
#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr ""
#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr ""
#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:121 authentication.pm:159
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "Autenticazion LDAP"
#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domini"
#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Server"
#: authentication.pm:125
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "Non utent"
#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr ""
#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:128
#, fuzzy, c-format
msgid "Password for user"
msgstr "Password"
#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "Autenticazion NIS"
#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "Domini NIS"
#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "Server NIS"
#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr ""
#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr ""
#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr ""
#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr ""
#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
#: authentication.pm:182
#, c-format
msgid "Set administrator (root) password"
msgstr ""
#: authentication.pm:183 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr ""
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr ""
#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr ""
#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO cun menu grafic"
#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr "LILO cun menu di test"
#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr ""
#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr ""
#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "no son a vonde stanziis in /boot"
#: bootloader.pm:1480
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr ""
#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1534
#, c-format
msgid "Re-install Boot Loader"
msgstr ""
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d minûts"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 minût"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d seconts"
#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "al mancje kdesu"
#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr "al mancje consolehelper"
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Austrie"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Australie"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Belgjiche"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brasîl"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "CanadĂ "
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Svuizare"
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Republiche Ceche"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Gjermanie"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Danimarcje"
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estonie"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Spagne"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Finlande"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "France"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grecie"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Ongjarie"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irlande"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "IsraĂŞl"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italie"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Gjapon"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Olande"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Norvegje"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Gnove Zelande"
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Polonie"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugal"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Russie"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Svezie"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr ""
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Tailandie"
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Taiwan"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Sud Afriche"
#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Stâts Unîts"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Gnûf"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:455 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Dismonte"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:452 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Monte"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:678 diskdrake/interactive.pm:697
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Pont di mount"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Par plasè insede il recapit dal server WebDAV"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:522
#: diskdrake/interactive.pm:1217 diskdrake/interactive.pm:1295
#, c-format
msgid "Mount point: "
msgstr "Pont di mount: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1302
#, c-format
msgid "Options: %s"
msgstr "Opzions: %s"
#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292
#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62
#: install_interactive.pm:216 install_interactive.pm:222
#: install_interactive.pm:275 install_interactive.pm:280
#: install_steps_interactive.pm:278 install_steps_interactive.pm:342
#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr ""
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr ""
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Assistent"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Sielç une azion"
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Par plasè frache su une partizion"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr ""
#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr ""
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Journalized FS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1232
#, c-format
msgid "Empty"
msgstr "Vueit"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Sorte di filesystem:"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Dopre ``%s''invezit"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:471
#, c-format
msgid "Create"
msgstr "Cree"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:624
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Sorte"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:456
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Scancele"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Dopre ``Unmount'' prin"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Sielç une partizion diferente"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Sielç une partizion"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Jessì"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr ""
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr ""
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr ""
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Continue distès?"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Jessî cence salvâ"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "JessĂ® cence scrivi te tabele des partizions?"
#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Vuelistu salvâ les modifichis a /etc/fstab"
#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Tu âs di tornâ a inviâ par che les modifichis a le tabele des partizions e "
"ledin in vore"
#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Scancele dut"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr ""
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "Di plui"
#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr ""
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Dutis les partizions primariis e son in vore"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "No rivi a zontâ altris partizions"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Par vê plui partizions, par plasè scancele une par podê creâ une partizion "
"extended"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""
#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Salve le tabele des partizions"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Torne a meti in vore le tabele des partizions"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Recupere le tabele des partizions"
#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Torne a cjariâ le tabele des partizions"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr ""
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Sielç il file"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "O cîr di recuperâ le tabele des partizions"
#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Informazions minudis"
#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:768
#, c-format
msgid "Resize"
msgstr "Mude dimension"
#: diskdrake/interactive.pm:451
#, c-format
msgid "Format"
msgstr "Formât"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to RAID"
msgstr "Zonte a RAID"
#: diskdrake/interactive.pm:454
#, c-format
msgid "Add to LVM"
msgstr "Zonte a LVM"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from RAID"
msgstr "RimĂ´f di RAID"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Remove from LVM"
msgstr "RimĂ´f di LVM"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Modify RAID"
msgstr "Mude RAID"
#: diskdrake/interactive.pm:460
#, c-format
msgid "Use for loopback"
msgstr "Dopre par loopback"
#: diskdrake/interactive.pm:515
#, c-format
msgid "Create a new partition"
msgstr "Cree une gnove partizion"
#: diskdrake/interactive.pm:518
#, c-format
msgid "Start sector: "
msgstr ""
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:937
#, c-format
msgid "Size in MB: "
msgstr "Dimension in MB: "
#: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938
#, c-format
msgid "Filesystem type: "
msgstr "Sorte di filesystem: "
#: diskdrake/interactive.pm:526
#, c-format
msgid "Preference: "
msgstr "Preference: "
#: diskdrake/interactive.pm:529
#, c-format
msgid "Logical volume name "
msgstr "Non dal volum logjic "
#: diskdrake/interactive.pm:559
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
#: diskdrake/interactive.pm:589
#, c-format
msgid "Remove the loopback file?"
msgstr "RimĂ´f il file di loopback?"
#: diskdrake/interactive.pm:608
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Dopo vê cambiât le sorte di partizion %s, ducj i dâts di cheste partizion e "
"vignaran pierdûts"
#: diskdrake/interactive.pm:620
#, c-format
msgid "Change partition type"
msgstr "Cambie le sorte di partizion"
#: diskdrake/interactive.pm:621 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Cuâl filesystem vuelistu?"
#: diskdrake/interactive.pm:629
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "O cambii di ext2 a ext3"
#: diskdrake/interactive.pm:649
#, c-format
msgid "Which volume label?"
msgstr ""
#: diskdrake/interactive.pm:665
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Dulà vuelistu montâ il file di loopback %s?"
#: diskdrake/interactive.pm:666
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Dulà vuelistu montâ il dispositîf %s?"
#: diskdrake/interactive.pm:671
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
#: diskdrake/interactive.pm:696
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Dulà vuelistu montâ %s?"
#: diskdrake/interactive.pm:720 diskdrake/interactive.pm:799
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "O cambii le dimension"
#: diskdrake/interactive.pm:720
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr ""
#: diskdrake/interactive.pm:756
#, c-format
msgid "This partition is not resizeable"
msgstr "No rivi a cambiâ le dimension di cheste dimension"
#: diskdrake/interactive.pm:761
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
#: diskdrake/interactive.pm:763
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Dopo vê cambiât le dimension %s, ducj i dâts de partizion e vignaran pierdûts"
#: diskdrake/interactive.pm:768
#, c-format
msgid "Choose the new size"
msgstr "Sielç le gnove dimension"
#: diskdrake/interactive.pm:769
#, c-format
msgid "New size in MB: "
msgstr "Gnove dimension in MB: "
#: diskdrake/interactive.pm:810 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Microsoft Windows®"
msgstr ""
#: diskdrake/interactive.pm:851
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Sielç un RAID esistin par zontâ"
#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:870
#, c-format
msgid "new"
msgstr "gnûf"
#: diskdrake/interactive.pm:868
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Sielç un LVM esistint dulà zontâ"
#: diskdrake/interactive.pm:874
#, c-format
msgid "LVM name?"
msgstr "Non LVM?"
#: diskdrake/interactive.pm:902
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""
#: diskdrake/interactive.pm:904
#, c-format
msgid "Moving physical extents"
msgstr ""
#: diskdrake/interactive.pm:922
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Cheste partizion no po sedi doprade par loopback"
#: diskdrake/interactive.pm:935
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:936
#, c-format
msgid "Loopback file name: "
msgstr "Non dal file di loopback: "
#: diskdrake/interactive.pm:941
#, c-format
msgid "Give a file name"
msgstr ""
#: diskdrake/interactive.pm:944
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""
#: diskdrake/interactive.pm:945
#, c-format
msgid "File already exists. Use it?"
msgstr ""
#: diskdrake/interactive.pm:968
#, c-format
msgid "Mount options"
msgstr ""
#: diskdrake/interactive.pm:975
#, c-format
msgid "Various"
msgstr ""
#: diskdrake/interactive.pm:1043
#, c-format
msgid "device"
msgstr ""
#: diskdrake/interactive.pm:1044
#, c-format
msgid "level"
msgstr ""
#: diskdrake/interactive.pm:1045
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "Gnove dimension in MB: "
#: diskdrake/interactive.pm:1062
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr ""
#: diskdrake/interactive.pm:1077
#, c-format
msgid "What type of partitioning?"
msgstr ""
#: diskdrake/interactive.pm:1115
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr ""
#: diskdrake/interactive.pm:1147
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
#: diskdrake/interactive.pm:1163
#, c-format
msgid "Move files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1163 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr ""
#: diskdrake/interactive.pm:1164
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
#: diskdrake/interactive.pm:1175
#, c-format
msgid "Moving files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1179
#, c-format
msgid "Copying %s"
msgstr ""
#: diskdrake/interactive.pm:1183
#, c-format
msgid "Removing %s"
msgstr ""
#: diskdrake/interactive.pm:1197
#, c-format
msgid "partition %s is now known as %s"
msgstr ""
#: diskdrake/interactive.pm:1198
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""
#: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1280
#, c-format
msgid "Device: "
msgstr "Periferiche: "
#: diskdrake/interactive.pm:1219
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "Periferiche: "
#: diskdrake/interactive.pm:1220
#, c-format
msgid "Volume label: "
msgstr ""
#: diskdrake/interactive.pm:1221
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ""
#: diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1234
#: diskdrake/interactive.pm:1298
#, c-format
msgid "Type: "
msgstr "Sorte: "
#: diskdrake/interactive.pm:1229 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Non: "
#: diskdrake/interactive.pm:1236
#, c-format
msgid "Start: sector %s\n"
msgstr ""
#: diskdrake/interactive.pm:1237
#, c-format
msgid "Size: %s"
msgstr "Dimension: %s"
#: diskdrake/interactive.pm:1239
#, c-format
msgid ", %s sectors"
msgstr ", %s setĂ´rs"
#: diskdrake/interactive.pm:1241
#, c-format
msgid "Cylinder %d to %d\n"
msgstr ""
#: diskdrake/interactive.pm:1242
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1243
#, c-format
msgid "Formatted\n"
msgstr "Formatât\n"
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Not formatted\n"
msgstr "No formatât\n"
#: diskdrake/interactive.pm:1245
#, c-format
msgid "Mounted\n"
msgstr "Montât\n"
#: diskdrake/interactive.pm:1246
#, fuzzy, c-format
msgid "RAID %s\n"
msgstr "Discs RAID %s\n"
#: diskdrake/interactive.pm:1251
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"File di loopback:\n"
" %s\n"
#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partizion inviade sicu predefinît\n"
" (par inviament MS-DOS, no par lilo)\n"
#: diskdrake/interactive.pm:1254
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"
#: diskdrake/interactive.pm:1255
#, c-format
msgid "Chunk size %d KiB\n"
msgstr ""
#: diskdrake/interactive.pm:1256
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discs RAID %s\n"
#: diskdrake/interactive.pm:1258
#, c-format
msgid "Loopback file name: %s"
msgstr "Non dal file di loopback: %s"
#: diskdrake/interactive.pm:1261
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
#: diskdrake/interactive.pm:1264
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
#: diskdrake/interactive.pm:1281
#, c-format
msgid "Read-only"
msgstr "Dome letûre"
#: diskdrake/interactive.pm:1282
#, c-format
msgid "Size: %s\n"
msgstr "Dimension: %s\n"
#: diskdrake/interactive.pm:1283
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr ""
#: diskdrake/interactive.pm:1284 network/thirdparty.pm:331
#, c-format
msgid "Info: "
msgstr "Informazions: "
#: diskdrake/interactive.pm:1285
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discs LVM %s\n"
#: diskdrake/interactive.pm:1286
#, c-format
msgid "Partition table type: %s\n"
msgstr "Sorte di tabele des partizions: %s\n"
#: diskdrake/interactive.pm:1287
#, c-format
msgid "on channel %d id %d\n"
msgstr "sul canâl %d id %d\n"
#: diskdrake/interactive.pm:1330
#, c-format
msgid "Filesystem encryption key"
msgstr "Clâf di cifradure dal filesystem"
#: diskdrake/interactive.pm:1331
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Sielç le to clâf di cifradure"
#: diskdrake/interactive.pm:1334
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Cheste clâf di cifradure e je masse sempliç (e a di sedi lungje almancul %d "
"letaris)"
#: diskdrake/interactive.pm:1335
#, c-format
msgid "The encryption keys do not match"
msgstr "Les clâfs di cifradure no corispuindin"
#: diskdrake/interactive.pm:1338 network/netconnect.pm:1074
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "Clâf di cifradure"
#: diskdrake/interactive.pm:1339
#, c-format
msgid "Encryption key (again)"
msgstr "Clâf di cifradure (ancjemò)"
#: diskdrake/interactive.pm:1341 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr ""
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "No rivi a jentrâ doprant il non utent %s (password no valevule?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Autenticazion di domini domandade"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Cuâl non utent"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Un altri"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Par plasè insede il to non utent, password e non di domini par jentrâ in "
"chest host."
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "Non utent"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Cîr server"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Cîr gnûfs server"
#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Il pachet %s al à di sedi instalât. Vuelistu instalâlu?"
#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, c-format
msgid "Could not install the %s package!"
msgstr ""
#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""
#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1313
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307
#: printer/printerdrake.pm:5464 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Avertence"
#: do_pkgs.pm:35 standalone/harddrake2:527
#, c-format
msgid "The following packages need to be installed:\n"
msgstr ""
#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "O instali i pachets..."
#: do_pkgs.pm:252
#, c-format
msgid "Removing packages..."
msgstr "O rimĂ´f i pachets..."
#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr ""
#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr ""
#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr ""
#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr ""
#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr ""
#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr ""
#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""
#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr ""
#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr ""
#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr ""
#: fs/mount_options.pm:113
#, c-format
msgid "Use an encrypted file system"
msgstr ""
#: fs/mount_options.pm:115
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:117
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:123
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs/mount_options.pm:129
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:133
#, c-format
msgid "Mount the file system read-only."
msgstr ""
#: fs/mount_options.pm:135
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:139
#, c-format
msgid "Allow an ordinary user to mount the file system."
msgstr ""
#: fs/mount_options.pm:141
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:143
#, c-format
msgid "Support user. extended attributes"
msgstr ""
#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr ""
#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""
#: fs/type.pm:363
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr ""
#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr ""
#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr ""
#: fsedit.pm:32
#, c-format
msgid "server"
msgstr ""
#: fsedit.pm:218
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
#: fsedit.pm:382
#, c-format
msgid "Mount points must begin with a leading /"
msgstr ""
#: fsedit.pm:383
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""
#: fsedit.pm:384
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr ""
#: fsedit.pm:388
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:394
#, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""
#: fsedit.pm:396
#, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr ""
#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
#: fsedit.pm:408
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr ""
#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "Nuie ce fâ"
#: harddrake/data.pm:62 install_any.pm:1710
#, c-format
msgid "Floppy"
msgstr "Floppy"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:88 install_any.pm:1711
#, c-format
msgid "Hard Disk"
msgstr ""
#: harddrake/data.pm:97 install_any.pm:1712
#, c-format
msgid "CDROM"
msgstr ""
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr ""
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:127 standalone/drakbackup:2055
#, c-format
msgid "Tape"
msgstr ""
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr ""
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr ""
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr ""
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr ""
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr ""
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr ""
#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr ""
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr ""
#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr ""
#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""
#: harddrake/data.pm:306
#, fuzzy, c-format
msgid "Memory"
msgstr "Di plui"
#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr ""
#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:989
#, c-format
msgid "Printer"
msgstr ""
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr ""
#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr ""
#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr ""
#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""
#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr ""
#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr ""
#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr ""
#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr ""
#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr ""
#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr ""
#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""
#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:949 standalone/finish-install:37
#: standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Tastiere"
#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:982
#, c-format
msgid "Mouse"
msgstr "Surie"
#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr ""
#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr ""
#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr ""
#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr ""
#: harddrake/sound.pm:229
#, c-format
msgid "No alternative driver"
msgstr ""
#: harddrake/sound.pm:230
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
#: harddrake/sound.pm:236
#, c-format
msgid "Sound configuration"
msgstr ""
#: harddrake/sound.pm:238
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:243
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
#: harddrake/sound.pm:245
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr ""
#: harddrake/sound.pm:267
#, c-format
msgid "Trouble shooting"
msgstr ""
#: harddrake/sound.pm:275
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:283
#, c-format
msgid "No open source driver"
msgstr ""
#: harddrake/sound.pm:284
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
#: harddrake/sound.pm:287
#, c-format
msgid "No known driver"
msgstr ""
#: harddrake/sound.pm:288
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""
#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838
#, c-format
msgid "Unknown driver"
msgstr ""
#: harddrake/sound.pm:293
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
#: harddrake/sound.pm:307
#, c-format
msgid "Sound trouble shooting"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:310
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
#: harddrake/sound.pm:336
#, c-format
msgid "Let me pick any driver"
msgstr ""
#: harddrake/sound.pm:339
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:342
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr ""
#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr ""
#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr ""
#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr ""
#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr ""
#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:740 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr ""
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Non utent"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:385 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Prossim"
#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Vuelistu doprâ cheste fature?"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr ""
#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Svilup"
#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Ambient Grafic"
#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648
#, c-format
msgid "Individual package selection"
msgstr ""
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr ""
#: help.pm:146 install_steps_interactive.pm:606
#, c-format
msgid "With X"
msgstr ""
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr ""
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr ""
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "No"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Si"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Configure"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:884
#, c-format
msgid "Hardware clock set to GMT"
msgstr ""
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr ""
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr ""
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr ""
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Microsoft Windows® partition"
msgstr ""
#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr ""
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "RimĂ´f Windows"
#: help.pm:374 install_interactive.pm:232
#, c-format
msgid "Custom disk partitioning"
msgstr ""
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1339
#, c-format
msgid "Replay"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1339
#, c-format
msgid "Automated"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1342
#, c-format
msgid "Save packages selection"
msgstr ""
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "Precedent"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "Instale"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr ""
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr ""
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
|