#!/usr/bin/perl # # Guillaume Cottenceau (gc@mandrakesoft.com) # # Copyright 2000 MandrakeSoft # # This software may be freely redistributed under the terms of the GNU # public license. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # use lib qw(/usr/lib/libDrakX); use common qw(:common :system :file); use interactive; use standalone; use log; use c; use netconnect; use detect_devices; $::isInstall and die "Not supported during install.\n"; $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/; local $_ = join '', @ARGV; /-h/ and die "usage: drakgw [--version]\n"; /-version/ and die 'version: $Id$ '."\n"; $::isEmbedded or $::isWizard = 1; $::Wizard_pix_up = "wiz_drakgw.png"; $::Wizard_title = "Internet Connection Sharing"; $::direct = /-direct/; my $sysconf_network = "/etc/sysconfig/network"; my $conf_linuxconf = "/etc/conf.linuxconf"; my $rc_firewall_generic = "/etc/rc.d/rc.firewall"; my $rc_firewall_drakgw = "/etc/rc.d/rc.firewall.inet_sharing"; my $rc_firewall_22 = "/etc/rc.d/rc.firewall.inet_sharing-2.2"; my $rc_firewall_24 = "/etc/rc.d/rc.firewall.inet_sharing-2.4"; my $dhcpd_conf = "/etc/dhcpd.conf"; my $cups_conf = "/etc/cups/cupsd.conf"; my $drakgw_setup = "/etc/sysconfig/inet_sharing"; my ($kernel_version) = c::kernel_version() =~ /(...)/; log::l("[drakgw] kernel_version $kernel_version"); $kernel_version eq '2.2' || $kernel_version eq '2.4' or die "Only for 2.2 or 2.4 kernels.\n"; my $in = interactive::vnew('su'); pur_gtk_mode() if $::isEmbedded && ref($in) =~ /gtk/; sub sys { system(@_) == 0 or log::l("[drakgw] Warning, sys failed for $_[0]") } sub outpend { my $f = shift; local *F; open F, ">>$f" or die "outpend in file $f failed: $!\n"; print F foreach @_; } sub start_daemons () { my $cups_used = 0; log::l("[drakgw] Starting daemons"); if (-f "/etc/rc.d/init.d/cups") { if (grep(/is running/, `/etc/rc.d/init.d/cups status`)) { $cups_used = 1; sys("/etc/rc.d/init.d/cups stop"); } } grep(/is running/, `/etc/rc.d/init.d/dhcpd status 2> /dev/null`) and sys("/etc/rc.d/init.d/dhcpd stop"); grep(/connection refused/, `/etc/rc.d/init.d/named status 2> /dev/null`) or sys("/etc/rc.d/init.d/named stop"); sys("/etc/rc.d/init.d/network restart"); sys("sh $rc_firewall_generic"); sys("/etc/rc.d/init.d/$_ start"), sys("/sbin/chkconfig --level 345 $_ on") foreach 'named', 'dhcpd'; sys("/etc/rc.d/init.d/cups start") if $cups_used; output $drakgw_setup, "INET_SHARING=enabled\n"; } sub stop_daemons () { log::l("[drakgw] Stopping daemons"); grep /is running/, `/etc/rc.d/init.d/dhcpd status` and sys("/etc/rc.d/init.d/dhcpd stop"); grep /Connection refused/, `/etc/rc.d/init.d/named status 2>&1` or sys("/etc/rc.d/init.d/named stop"); if ($kernel_version eq "2.2") { sys("/sbin/ipchains -F"); } else { sys("/sbin/iptables -t nat -F"); } sys("/sbin/chkconfig --level 345 $_ off") foreach 'named', 'dhcpd'; output $drakgw_setup, "INET_SHARING=disabled\n"; } sub fatal_quit ($) { log::l("[drakgw] FATAL: $_[0]"); undef $wait_configuring; $in->ask_warn('', $_[0]); quit_global($in, -1); } # while ($::isEmbedded) { # kill USR2, $::CCPID; # my $setup_state = grep(/disabled/, cat_($drakgw_setup)) ? _("The setup has already been done, but it's currently disabled.") : # grep(/enabled/, cat_($drakgw_setup)) ? _("The setup has already been done, and it's currently enabled.") : # _("No Internet Connection Sharing has ever been configured."); # $in->ask_okcancel('', # _("Welcome to the Internet Connection Sharing utility! # %s # Click on ``Ok'' if you want to launch the setup wizard.", $setup_state)) and system("/usr/sbin/drakgw"); # kill USR1, $::CCPID; # } begin: #- ********************************** #- * 0th step: verify if we are already set up if (-f $drakgw_setup) { $::Wizard_no_previous = 1; if (grep(/enabled/, cat_($drakgw_setup))) { my $r = $in->ask_from_list_(_("Internet Connection Sharing currently enabled"), _("The setup of Internet connection sharing has already been done. It's currently enabled. What would you like to do?"), [ __("disable"), __("reconfigure"), __("dismiss") ]) or quit_global($in, 0); if ($r eq "disable") { { my $wait_disabl = $in->wait_message('', _("Disabling servers...")); stop_daemons(); } foreach ($dhcpd_conf, $rc_firewall_22, $rc_firewall_24) { renamef($_, "$_.drakgwdisable") or die "Could not rename $_ to $_.drakgwdisable" } log::l("[drakgw] Disabled"); $::Wizard_finished = 1; $in->ask_okcancel('', _("Internet connection sharing is now disabled.")); quit_global($in, 0); } if ($r eq "dismiss") { quit_global($in, 0); } } elsif (grep(/disabled/, cat_($drakgw_setup))) { my $r = $in->ask_from_list_(_("Internet Connection Sharing currently disabled"), _("The setup of Internet connection sharing has already been done. It's currently disabled. What would you like to do?"), [ __("enable"), __("reconfigure"), __("dismiss") ]); if ($r eq "enable") { foreach ($dhcpd_conf, $rc_firewall_22, $rc_firewall_24) { rename($_, "$_.old") if -f $_; rename("$_.drakgwdisable", $_) or die "Could not find configuration. Please reconfigure."; } { my $wait_enabl = $in->wait_message('', _("Enabling servers...")); start_daemons(); } log::l("[drakgw] Enabled"); $::Wizard_finished = 1; $in->ask_okcancel('', _("Internet connection sharing is now enabled.")); quit_global($in, 0); } if ($r eq "dismiss") { quit_global($in, 0); } } else { $in->ask_warn(_("Unrecognized config file"), _("Config file content could not be interpreted.")); quit_global($in, -1); } } #- ********************************** #- * 1st step: detect/setup step_ask_confirm: $::Wizard_no_previous = 1; $::direct or $in->ask_okcancel(_("Internet Connection Sharing"), _("You are about to configure your computer to share its Internet connection. With that feature, other computers on your local network will be able to use this computer's Internet connection. Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."), 1) or quit_global($in, 0); undef $::Wizard_no_previous; step_detectsetup: my @configured_devices = map { /ifcfg-(\S+)/ } `ls /etc/sysconfig/network-scripts/ifcfg*`; my %aliased_devices; /^\s*alias\s+(eth[0-9])\s+(\S+)/ and $aliased_devices{$1} = $2 foreach cat_("/etc/modules.conf"); my $card_netconnect = netconnect::get_net_device(); defined $card_netconnect and log::l("[drakgw] Information from netconnect: ignore card $card_netconnect"); my @cards = grep { log::l("[drakgw] Have network card: $_"); $_ ne $card_netconnect } detect_devices::getNet(); log::l("[drakgw] Available network cards: ", join(", ", @cards)); my $format = sub { $aliased_devices{$_[0]} ? _("Interface %s (using module %s)", $_[0], $aliased_devices{$_[0]}) : _("Interface %s", $_[0]); }; #- setup the network interface we shall use my $device; if (!@cards) { $in->ask_warn(_("No network adapter on your system!"), _("No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.")); quit_global($in); } elsif (@cards == 1) { $device = $cards[0]; $in->ask_okcancel(_("Network interface"), _("There is only one configured network adapter on your system: %s I am about to setup your Local Area Network with that adapter.", $format->($device)), 1) or goto step_ask_confirm; } else { $device = $in->ask_from_listf(_("Choose the network interface"), _("Please choose what network adapter will be connected to your Local Area Network."), $format, \@cards, ) or goto step_ask_confirm; defined $device or quit_global($in); } log::l("[drakgw] Choosing network card: $device\n"); grep(/$device/, @configured_devices) and ($in->ask_okcancel('', _("Warning, the network adapter is already configured. I will reconfigure it.")) or goto step_detectsetup); my $lan_address = "192.168.0"; #- test for potential conflict with other networks foreach (grep { $_ ne $device } @configured_devices) { grep(/$lan_address/, cat_("/etc/sysconfig/network-scripts/ifcfg-$_")) and ($in->ask_warn('', _("Potential LAN address conflict found in current config of $_!\n")) or goto step_detectsetup); } #- test for potential conflict with previous firewall config if ($kernel_version eq '2.2') { if (-f '/etc/sysconfig/ipchains' || -x '/sbin/ipchains' && listlength(`/sbin/ipchains -nL`) > 3) { $in->ask_okcancel(_("Firewalling configuration detected!"), _("Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.")) or goto step_detectsetup; } } else { system('modprobe iptable_nat'); if (-f '/etc/sysconfig/iptables' || -x '/sbin/iptables' && listlength(`/sbin/iptables -t nat -nL`) > 8) { $in->ask_okcancel(_("Firewalling configuration detected!"), _("Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.")) or goto step_detectsetup; } } #- ********************************** #- * 2nd step: configure $wait_configuring = $in->wait_message(_("Configuring..."), _("Configuring scripts, installing software, starting servers...")); #- setup the /etc/sysconfig/network-script/ script my $network_scripts = "/etc/sysconfig/network-scripts"; my $ifcfg = "$network_scripts/ifcfg-$device"; renamef($ifcfg, "$network_scripts/old.ifcfg-$device"); output($ifcfg, qq(DEVICE=$device BOOTPROTO=static IPADDR=$lan_address.1 NETMASK=255.255.255.0 NETWORK=$lan_address.0 BROADCAST=$lan_address.255 ONBOOT=yes )); #- install and setup the RPM packages my $rpms_to_install; my %rpm2file = ( ipchains => "/sbin/ipchains", iptables => "/sbin/iptables", dhcp => "/usr/sbin/dhcpd", linuxconf => $conf_linuxconf, bind => "/usr/sbin/named", "caching-nameserver" => "/var/named/named.local"); $in->standalone::pkgs_install(grep { !-e $rpm2file{$_} } keys %rpm2file); -e $rpm2file{$_} or fatal_quit(_("Problems installing package $_")) foreach keys %rpm2file; #- setup the masquerading configuration if (!-f $rc_firewall_generic) { output($rc_firewall_generic, "#!/bin/sh # # Automatically generated by drakgw [ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw "); chmod 0700, $rc_firewall_generic; } elsif (!grep(/drakgw/, cat_($rc_firewall_generic))) { outpend($rc_firewall_generic, "# # Automatically added by drakgw [ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw "); } output($rc_firewall_drakgw, q(#!/bin/sh KERNELMAJ=`uname -r | sed -e 's,\..*,,'` KERNELMIN=`uname -r | sed -e 's,[^\.]*\.,,' -e 's,\..*,,'` if [ "$KERNELMAJ" -eq 2 -a "$KERNELMIN" -eq 2 ]; then [ -x ) . $rc_firewall_22 . ' ] && ' . $rc_firewall_22 . q( fi if [ "$KERNELMAJ" -eq 2 -a "$KERNELMIN" -eq 4 ]; then [ -x ) . $rc_firewall_24 . ' ] && ' . $rc_firewall_24 . q( fi )); chmod 0700, $rc_firewall_drakgw; output($rc_firewall_22, qq(#!/bin/sh # # rc.firewall - Initial SIMPLE IP Masquerade test for 2.1.x and 2.2.x kernels using IPCHAINS # # Load all required IP MASQ modules # # NOTE: Only load the IP MASQ modules you need. All current IP MASQ modules # are shown below but are commented out from loading. # Needed to initially load modules # /sbin/depmod -a # Supports the proper masquerading of FTP file transfers using the PORT method # /sbin/modprobe ip_masq_ftp # Supports the masquerading of RealAudio over UDP. Without this module, # RealAudio WILL function but in TCP mode. This can cause a reduction # in sound quality # /sbin/modprobe ip_masq_raudio # Supports the masquerading of IRC DCC file transfers # /sbin/modprobe ip_masq_irc # Supports the masquerading of Quake and QuakeWorld by default. This modules is # for for multiple users behind the Linux MASQ server. If you are going to play # Quake I, II, and III, use the second example. # # NOTE: If you get ERRORs loading the QUAKE module, you are running an old # ----- kernel that has bugs in it. Please upgrade to the newest kernel. # #Quake I / QuakeWorld (ports 26000 and 27000) #/sbin/modprobe ip_masq_quake # #Quake I/II/III / QuakeWorld (ports 26000, 27000, 27910, 27960) /sbin/modprobe ip_masq_quake 26000,27000,27910,27960 # Supports the masquerading of the CuSeeme video conferencing software # /sbin/modprobe ip_masq_cuseeme #Supports the masquerading of the VDO-live video conferencing software # /sbin/modprobe ip_masq_vdolive #CRITICAL: Enable IP forwarding since it is disabled by default since # # Redhat Users: you may try changing the options in /etc/sysconfig/network from: # # FORWARD_IPV4=false # to # FORWARD_IPV4=true # echo 1 > /proc/sys/net/ipv4/ip_forward # Dynamic IP users: # # If you get your IP address dynamically from SLIP, PPP, or DHCP, enable this following # option. This enables dynamic-ip address hacking in IP MASQ, making the life # with Diald and similar programs much easier. # #echo 1 > /proc/sys/net/ipv4/ip_dynaddr # MASQ timeouts # # 2 hrs timeout for TCP session timeouts # 10 sec timeout for traffic after the TCP/IP "FIN" packet is received # 160 sec timeout for UDP traffic (Important for MASQ'ed ICQ users) # /sbin/ipchains -M -S 7200 10 160 # DHCP: For people who receive their external IP address from either DHCP or BOOTP # such as ADSL or Cablemodem users, it is necessary to use the following # before the deny command. The "bootp_client_net_if_name" should be replaced # the name of the link that the DHCP/BOOTP server will put an address on to? # This will be something like "eth0", "eth1", etc. # # This example is currently commented out. # # #/sbin/ipchains -A input -j ACCEPT -i bootp_clients_net_if_name -s 0/0 67 -d 0/0 68 -p udp # Enable simple IP forwarding and Masquerading # # NOTE: The following is an example for an internal LAN address in the 192.168.0.x # network with a 255.255.255.0 or a "24" bit subnet mask. # # Please change this network number and subnet mask to match your internal LAN setup # /sbin/ipchains -P forward DENY /sbin/ipchains -A forward -s $lan_address.0/24 -j MASQ )); chmod 0700, $rc_firewall_22; output($rc_firewall_24, qq(#!/bin/sh # Load the NAT module (this pulls in all the others). modprobe iptable_nat # Turn on IP forwarding echo 1 > /proc/sys/net/ipv4/ip_forward # In the NAT table (-t nat), Append a rule (-A) after routing (POSTROUTING) # which says to MASQUERADE the connection (-j MASQUERADE). iptables -t nat -A POSTROUTING -s $lan_address.0/24 -j MASQUERADE )); chmod 0700, $rc_firewall_24; #- be sure that FORWARD_IPV4 is enabled in /etc/sysconfig/network substInFile { s/^FORWARD_IPV4.*\n//; $_ .= "FORWARD_IPV4=true\n" if eof } $sysconf_network; #- setup the DHCP server renamef($dhcpd_conf, "$dhcpd_conf.old"); output($dhcpd_conf, qq(subnet $lan_address.0 netmask 255.255.255.0 { # default gateway option routers $lan_address.1; option subnet-mask 255.255.255.0; option domain-name "homelan.org"; option domain-name-servers $lan_address.1; range dynamic-bootp $lan_address.16 $lan_address.253; default-lease-time 21600; max-lease-time 43200; } )); #- put the interface for the dhcp server in linuxconf config, for the /etc script of dhcpd substInFile { s/^DHCP.interface.*\n//; $_ .= "DHCP.interface $device\n" if eof } $conf_linuxconf; #- Set up /etc/cups/cupsd.conf to make the broadcasting of the printer info #- working correctly: #- #- 1. ServerName # because clients do necessarily #- # know the server's name #- #- 2. BrowseAddress # broadcast printer info into #- # the local network. #- #- 3. BrowseOrder Deny,Allow #- BrowseDeny All #- BrowseAllow # Only accept broadcast signals #- # coming from local network #- #- 4. #- Order Deny,Allow #- Deny From All #- Allow From # Allow only machines of local #- # network to access the server #- #- These steps are only done when the CUPS package is installed. substInFile { s/^ServerName[^:].*\n//; $_ .= "ServerName $lan_address.1\n" if eof; s/^BrowseAddress.*\n//; $_ .= "BrowseAddress $lan_address.255\n" if eof; s/^BrowseOrder.*\n//; $_ .= "BrowseOrder Deny,Allow\n" if eof; s/^BrowseDeny.*\n//; $_ .= "BrowseDeny All\n" if eof; s/^BrowseAllow.*\n//; $_ .= "BrowseAllow $lan_address.*\n" if eof; } $cups_conf; #- Modify the root location block in /etc/cups/cupsd.conf if (-f $cups_conf) { my @cups_conf_content = cat_($cups_conf); my @root_location; my $root_location_start; my $root_location_end; # Cut out the root location block so that it can be treated seperately # without affecting the rest of the file if (grep(m|^\s*|, @cups_conf_content)) { $root_location_start = -1; $root_location_end = -1; # Go through all the lines, bail out when start and end line found for (my $i = 0; $i < @cups_conf_content && $root_location_end == -1; $i++) { if ($cups_conf_content[$i] =~ m|^\s*<\s*Location\s+/\s*>|) { $root_location_start = $i; } elsif (($cups_conf_content[$i] =~ m|^\s*<\s*/Location\s*>|) && ($root_location_start != -1)) { $root_location_end = $i; } } # Rip out the block and store it seperately @root_location = splice(@cups_conf_content, $root_location_start, $root_location_end - $root_location_start + 1); } else { # If there is no root location block, create one $root_location_start = @cups_conf_content; @root_location = ("\n", "\n"); } # Delete all former "Order", "Allow", and "Deny" lines from the root location block s/^\s*Order.*//, s/^\s*Allow.*//, s/^\s*Deny.*// foreach @root_location; # Add the new "Order" and "Deny" lines, add an "Allow" line for the local network splice(@root_location, -1, 0, $_) foreach ("Order Deny,Allow\n", "Deny From All\n", "Allow From 127.0.0.1\n", "Allow From $lan_address.*\n"); # Put the changed root location block back into the file splice(@cups_conf_content, $root_location_start, 0, @root_location); output $cups_conf, @cups_conf_content; } #- start the daemons start_daemons(); #- bye-bye message undef $wait_configuring; $::Wizard_no_previous = 1; $::Wizard_finished = 1; $in->ask_okcancel(_("Congratulations!"), _("Everything has been configured. You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).")); log::l("[drakgw] Installation complete, exiting\n"); quit_global($in, 0); sub quit_global { my ($in, $exitcode) = @_; $in->exit($exitcode); goto begin } sub pur_gtk_mode { require Gtk; init Gtk; my $setup_state = grep(/disabled/, cat_($drakgw_setup)) ? _("The setup has already been done, but it's currently disabled.") : grep(/enabled/, cat_($drakgw_setup)) ? _("The setup has already been done, and it's currently enabled.") : _("No Internet Connection Sharing has ever been configured."); my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel; $window1->signal_connect ( delete_event => sub { Gtk->exit(0); }); $window1->set_position(1); $window1->set_title(_("Internet connection sharing configuration")); $window1->border_width(10); my $vbox1 = new Gtk::VBox(0,0); $window1->add($vbox1); my $hbox1 = new Gtk::HBox(0,0); $vbox1->pack_start($hbox1,1,1,0); my $label1 = new Gtk::Label( _("Welcome to the Internet Connection Sharing utility! %s Click on Configure to launch the setup wizard.", $setup_state)); $hbox1->pack_start($label1,1,1,0); my $hbox2 = new Gtk::HBox(0,0); $vbox1->pack_start($hbox2,1,1,0); my $bbox1 = new Gtk::HButtonBox; $vbox1->pack_start($bbox1,0,0,0); $bbox1->set_layout(-end); my $button_conf = new Gtk::Button _("Configure"); $button_conf->signal_connect ( clicked => sub { system("/usr/sbin/drakgw --wizard"); }); $bbox1->add($button_conf); my $button_cancel = new Gtk::Button _("Cancel"); $button_cancel->signal_connect ( clicked => sub { kill(USR1, $::CCPID); }); $bbox1->add($button_cancel); $window1->show_all(); Gtk->main_iteration while Gtk->events_pending; $::isEmbedded and kill USR2, $::CCPID; Gtk->main; Gtk->exit(0); } #------------------------------------------------- #- $Log$ #- Revision 1.37 2001/04/09 16:29:20 gc #- do not die when an initscript returns non-0 (initscripts too buggy) #- #- Revision 1.36 2001/04/09 11:39:40 gc #- fix for when there is an already existing rc.firewall #- complies with old format of drakgw so that upgrades will work #- #- Revision 1.35 2001/04/08 05:33:14 damien #- updated #- #- Revision 1.34 2001/04/06 15:09:15 yduret #- swap cancel/configure button #- #- Revision 1.33 2001/04/06 14:12:06 gc #- - correct yvounetification in i18n stuff #- - remove some remaining debugging printings #- - add a bit more of explanations when starting drakgw in wizard mode #- #- Revision 1.32 2001/04/06 01:34:44 yduret #- recoded a embedded && gtk mode #- #- Revision 1.31 2001/03/31 14:21:10 pablo #- Updated po files and help messages (patch from Pixel) #- #- Revision 1.30 2001/03/29 11:52:15 damien #- updated for new wiz png policy #- #- Revision 1.29 2001/03/26 15:29:01 gc #- first attempt at pixelization of code (till's cups patches) #- #- Revision 1.28 2001/03/21 18:07:36 gc #- honour embedded mode #- #- Revision 1.27 2001/03/13 16:23:29 gc #- fix for bind #- #- Revision 1.26 2001/03/13 15:31:05 gc #- - fix destructive parts of pixelization #- - fix some own bugs #- #- Revision 1.25 2001/03/13 00:00:11 prigaux #- pixelization #- #- Revision 1.24 2001/03/12 18:26:16 gc #- - make it work as a wizard #- - make it work with iptables (kernel-2.4) #- #- Revision 1.23 2001/03/01 00:18:17 damien #- updated embedded mode #- #- Revision 1.22 2001/02/26 18:39:12 prigaux #- pixelization #- #- Revision 1.21 2001/02/08 10:11:37 damien #- implemented or updated embedded mode #- #- Revision 1.20 2001/02/08 07:00:41 damien #- added embedded and (ugly) wizard mode. #- #- Revision 1.19 2001/01/10 00:32:42 prigaux #- use standalone and standalone::pkgs_install #- #- Revision 1.18 2000/12/16 16:13:34 prigaux #- use ldetect-lst #- #- Revision 1.17 2000/11/13 15:48:33 gc #- Integrate Till's patches for better work with Cups. #- #- Revision 1.16 2000/10/10 15:31:50 gc #- make only one call to urpmi in order to install all the needed rpm's #-