#!/usr/bin/perl # # Copyright (C) 2001 by Sebastien DUPONT <sdupont@mandrakesoft.com> # Redistribution of this file is permitted under the terms of the GNU # Public License (GPL) # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # #________________________________________________________________ # # Description: # # Drakbacup is use to backup your system. # During the configuration you can select # - System files, # - Users files, # - Other files. # or All your system ... and Other (like windows Partitions) # # Drakbacup allow you to backup your system on: # - Harddrive. # - NFS. # - CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.). # - FTP. # - Rsync. # - Webdav. # - Tape. # # Drakbacup allow you to Restore your system on # choosen directory. # # Per default all backup will be stored on your # /var/drakbackup directory # # configuration file: # /etc/drakconf/drakbackup/drakbakup.conf # #________________________________________________________________ # # REQUIRE: cron if daemon # cdrecord & mkisofs # # PBS persistants: # selection des sources a inclure dans le backup cd. # # # WARNING: ne pas ecraser les fichiers /etc/passwd fstab # after a other install # # # TODO: # - replace alors incremental selectionne. # - l.380 incremental: date -> si deja existe faire find -m ... | tar ... # - non incremental: date + supprime old avant le backup # - ftp choose port to use ftp connexions # - send mail with results. # - use quota. # - placer README dans $save_path -> prevenir des danger de supprimer la premier version # - ssh & rsync -> expect or .identity.pub/authorized_keys # - calcul disk space. # - backend : --resore_all, --restore_sys, --restore_users # --build_cd_autoinst # --backup_now --backup_default_now # - boot floppy disk # - webdav # - rsync # - cd writer detection -> cdrw: /sys/dev/cdrom/info /scsi/host0/bus0/target4/lun0 # - write on cd # - total backup.( all partitions wanted, windows partitions for example!) # - custom deamon # - build autoboot with backup and install cd # - use .backupignore like on CVS # # DONE TODAY: #________________________________________________________________ use Gtk; use lib qw(/usr/lib/libDrakX ); use interactive; use standalone; use my_gtk qw(:helpers :wrappers); use common; use strict; use Time::localtime; my $in = 'interactive'->vnew('', 'default'); $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/; if ("@ARGV" =~ /--help|-h/) { print q(Backup and monitoring application --list : list of files or directories to backup. --default : save default directories. --build_cd : build restore iso with the currents backups files & rescue options. --build_floppy : build restore floppy. --save_dir : by default the backup files are saved in in /var/backup directory so write other directory to change to change it. --conf_file : to read other configuration file. ); exit(0); } # Backend Options. my $default = 0; my $build_cd = 0; my $build_floppy = 0; my $mode = 0; my $conf_file = 0; my @list_arg = (); my $central_widget; my $previous_widget; my $current_widget; my $interactive; my $up_box; my $advanced_box; my $box; my $box2; my $backup_choice = 0; my $cfg_file_exist = 0; my @user_and_path_list; my @all_user_list; my $list_other; my $label_cfg_file; my $DEBUG = 0; my $restore_sys = 1; my $restore_user = 1; my $restore_other = 1; my @user_backuped = (); my $sys_backuped = 0; my $other_backuped = 0; my @user_list_to_restore= (); my $retore_box2; my $cd_devive_entry; my $custom_help; my $button_box; my $button_box_tmp; my $next_widget; my $system_state; my $restore_state; my $save_path_entry; my $pbar; my $pbar1; my $pbar2; my $pbar3; my $the_time; my @user_list_to_restore2 = (); my @data_backuped = (); my $box_tail; my $label_tail; my @user_list_to_build_on_cd = (); my $restore_path = "/"; my $restore_other_path = 0; # config. FILES -> Default PATH & Global variables. my @sys_files = ("/etc"); my @user_list; my @list_other = () ; my $cfg_file = "/etc/drakxtools/drakbackup/drakbackup.conf"; my $save_path = "/var/drakbackup"; my $restore_path = "/tmp"; my $comp_mode = 0; my $backup_sys = 1; my $backup_user = 1; my $backup_daemon = 1; my $backup_sys_versions = 0; my $backup_user_versions = 0; my $backup_other_versions = 0; my $what_no_browser = 1; my $cdrw = 0; my $net_proto= ''; my $host_path = ''; my $login_user = ''; my $net_daemon = 0; my $hd_daemon = 0; my $cd_daemon = 0; my $hd_quota = 0; my $where_net_ftp = 0; my $where_net_ssh = 0; my $where_net = 0; my $where_hd = 1; my $where_cd = 0; my $where_tape = 0; my $cd_time = 650; my $when_space; my $cd_with_install_boot = 0; my $cd_devive = ''; my $host_name = ''; my $backupignore = 0; my $auth_choice = 0; my $remember_pass = 0; my $passwd_user= ''; my $save_device_tape = (); my $cdrw_erase = 0; my $no_critical_sys = 1; foreach (@ARGV) { /--default/ and $default = 1, $mode=-1; /--build_cd/ and $build_cd = 1, $mode=-1; /--build_floppy/ and $build_floppy = 1, $mode=-1; /--conf_file/ and $mode = 0, next; /--list/ and $mode = 1, next; /--debug/ and $DEBUG = 1, next; $mode == 1 and push @list_arg, $_; } $build_floppy || $build_cd || $default || @list_arg || $conf_file ? backend_mod() : interactive_mode(); sub read_passwd { my @tmp1; my @tmp2; @user_and_path_list = map { (split(':', $_))[0] . ":" . (split(':', $_))[5] } grep {( split(':', $_))[2] > 500} split ('\n', cat_('/etc/passwd')); $DEBUG and print "user_and_path_list: ".$_."\n" foreach (@user_and_path_list); @user_list = (); @all_user_list = (); push @user_and_path_list, 'root:/root'; push @user_list, (split(':', $_))[0] foreach (@user_and_path_list); push @all_user_list, (split(':', $_))[0] foreach (@user_and_path_list); @tmp1 = sort @user_list; @user_list = @tmp1; @tmp2 = sort @all_user_list; @all_user_list = @tmp2; } sub the_time { $the_time = "_"; $the_time .= localtime->year() + 1900; $the_time .= localtime->mon() +1; $the_time .= localtime->mday(); $the_time .= "_"; if (localtime->hour() <= 10 ) { $the_time .= "0"; } $the_time .= localtime->hour(); if (localtime->min() <= 10 ) { $the_time .= "0"; } $the_time .= localtime->min(); } sub save_conf_file { my @cfg_list = ( "SYS_FILES=@sys_files\n", "HOME_FILES=@user_list\n", "OTHER_FILES=@list_other\n", "PATH_TO_SAVE=$save_path\n", "HOST_PATH=$host_path\n", "NET_PROTO=$net_proto\n", "CD_TIME=$cd_time\n", "DAEMON_TIME_SPACE=$when_space\n", "CDRW_DEVICE=$cd_devive\n", "LOGIN=$login_user\n", "TAPE_DEVICE=$save_device_tape\n", "HOST_NAME=$host_name\n" ); $no_critical_sys and push @cfg_list, "NO_CRITICAL_SYS\n" ; $no_critical_sys or push @cfg_list, "CRITICAL_SYS\n" ; $backup_sys_versions and push @cfg_list, "SYS_INCREMENTAL_BACKUPS\n" ; $backup_user_versions and push @cfg_list, "USER_INCREMENTAL_BACKUPS\n" ; $backup_other_versions and push @cfg_list, "OTHER_INCREMENTAL_BACKUPS\n" ; $cdrw_erase and push @cfg_list, "CDRW_ERASE\n" ; $where_net_ftp and push @cfg_list, "USE_NET_FTP\n" ; $where_net_ssh and push @cfg_list, "USE_NET_SSH\n" ; $remember_pass and push @cfg_list, "LOGIN=$login_user\n" ; $remember_pass and push @cfg_list, "PASSWD=$passwd_user\n" ; $remember_pass and push @cfg_list, "REMEMBER_PASS\n" ; $auth_choice or push @cfg_list, "AUTH_CHOICE=0\n" ; if ($auth_choice == 1) { push @cfg_list, "AUTH_CHOICE=1\n" ;} if ($auth_choice == 2) { push @cfg_list, "AUTH_CHOICE=2\n" ;} $cd_with_install_boot and push @cfg_list, "CD_WITH_INSTALL_BOOT\n" ; $net_daemon and push @cfg_list, "NET_DAEMON\n" ; $hd_daemon and push @cfg_list, "HD_DAEMON\n" ; $cd_daemon and push @cfg_list, "CD_DAEMON\n" ; $hd_quota and push @cfg_list, "HD_QUOTA\n" ; $where_hd and push @cfg_list, "USE_HD\n" ; $where_cd and push @cfg_list, "USE_CD\n" ; $where_net and push @cfg_list, "USE_NET\n" ; $cdrw and push @cfg_list, "CDRW\n"; $what_no_browser or push @cfg_list, "BROWSER_CACHE\n" ; $backup_sys or push @cfg_list, "NO_SYS_FILES\n"; if ($comp_mode) {push @cfg_list, "OPTION_COMP=TAR.BZ2\n"} else { push @cfg_list, "OPTION_COMP=TAR.GZ\n" } output_p($cfg_file, @cfg_list); save_cron_files(); } sub read_cron_files { if (-f '/etc/cron.hourly/drakbackup') { $when_space = 'hourly'; } elsif (-f '/etc/cron.daily/drakbackup') { $when_space = 'daily'; } elsif (-f '/etc/cron.weekly/drakbackup') { $when_space = 'weekly';} elsif (-f '/etc/cron.monthly/drakbackup') { $when_space = 'monthly';} else {$backup_daemon = 0; } } sub save_cron_files { my @cron_file = ("#!/bin/sh\n", "\n", "/seb/cvs/gi/perl-install/standalone --default" ); if ($backup_daemon) { foreach ('hourly', 'daily', 'weekly', 'monthly'){ -f "/etc/cron.$_/drakbackup" and rm_rf("/etc/cron.$_/drakbackup"); } if ( $when_space eq _("hourly")) { output_p('/etc/cron.hourly/drakbackup', @cron_file )} elsif ( $when_space eq _("daily")) { output_p('/etc/cron.daily/drakbackup', @cron_file )} elsif ( $when_space eq _("weekly")) { output_p('/etc/cron.weekly/drakbackup', @cron_file )} elsif ( $when_space eq _("monthly")) { output_p('/etc/cron.monthly/drakbackup', @cron_file )} } else { foreach ('hourly', 'daily', 'weekly', 'monthly'){ -f "/etc/cron.$_/drakbackup" and rm_rf("/etc/cron.$_/drakbackup"); } } } sub read_conf_file { read_passwd(); if (-e $cfg_file) { open ( CONF_FILE, "<"."$cfg_file") || die; while (<CONF_FILE>) { next unless /\S/; next if /^#/; chomp; if (/^SYS_FILES/) { s/^SYS_FILES=//gi; @sys_files = split(' ', $_ ); } if (/^HOME_FILES/) { s/^HOME_FILES=//gi; @user_list = split(' ', $_ ); } if (/^OTHER_FILES/) { s/^OTHER_FILES=//gi; @list_other = split(' ', $_ ); } if (/^PATH_TO_SAVE/) { s/^PATH_TO_SAVE=//gi; $save_path = $_; } if (/^NO_SYS_FILES/) { $backup_sys = 0;} if (/^NO_USER_FILES/) { $backup_user = 0;} if (/^OPTION_COMP/) { s/^OPTION_COMP=//gi; /TAR.GZ/ and $comp_mode = 0; /TAR.BZ2/ and $comp_mode = 1; } if (/^BROWSER_CACHE/) { $what_no_browser = 0; } if (/^CDRW/) { $cdrw = 1; } if (/^NET_PROTO/) { s/^NET_PROTO=//gi; $net_proto = $_; } if (/^HOST_PATH/) { s/^HOST_PATH=//gi; $host_path = $_; } if (/^NET_DAEMON/) { $net_daemon = 1; } if (/^HD_DAEMON/) { $hd_daemon = 1; } if (/^CD_DAEMON/) { $cd_daemon = 1; } if (/^HD_QUOTA/) { $hd_quota = 1; } if (/^USE_HD/) { $where_hd = 1; } if (/^USE_CD/) { $where_cd = 1; } if (/^USE_NET/) { $where_net = 1; } if (/^USE_TAPE/) { $where_tape = 1; } if (/^CD_TIME/) { s/^CD_TIME=//gi; $cd_time = $_; } if (/^DAEMON_TIME_SPACE/) { s/^DAEMON_TIME_SPACE=//gi; $when_space = $_; } if (/^CD_WITH_INSTALL_BOOT/) { $cd_with_install_boot = 1; } if (/^CDRW_DEVICE/) { s/^CDRW_DEVICE=//gi; $cd_devive = $_;} if (/^HOST_NAME/) { s/^HOST_NAME=//gi; $host_name = $_;} if (/^AUTH_CHOICE/) { s/^AUTH_CHOICE=//gi; $auth_choice = $_; } if (/^REMEMBER_PASS/) { $remember_pass = 1; } if (/^LOGIN/) { s/^LOGIN=//gi; $login_user = $_; $remember_pass = 1; } if (/^PASSWD/) { s/^PASSWD=//gi; $passwd_user = $_; $remember_pass = 1; } if (/^USE_NET_FTP/) { $where_net_ftp = 1; } if (/^USE_NET_SSH/) { $where_net_ssh = 1; } if (/^TAPE_DEVICE/) { s/TAPE_DEVICE=//gi; $save_device_tape = $_;} if (/^CDRW_ERASE/) { $cdrw_erase = 1;} if (/^SYS_INCREMENTAL_BACKUPS/) { $backup_sys_versions = 1;} if (/^USER_INCREMENTAL_BACKUPS/) { $backup_user_versions = 1;} if (/^OTHER_INCREMENTAL_BACKUPS/) { $backup_other_versions = 1;} if (/^NO_CRITICAL_SYS/) { $no_critical_sys = 1;} if (/^CRITICAL_SYS/) { $no_critical_sys = 0;} } read_cron_files(); $cfg_file_exist = 1; } else { $cfg_file_exist = 0; } close CONF_FILE; } sub return_path { my $name = $_; foreach (@user_and_path_list) { if (grep /^$name\:/, $_) { s/^$name\://gi; return $_; } } } sub ftp_client { use Net::FTP; my $ftp = Net::FTP->new("$host_name"); $ftp->login("$login_user","$passwd_user"); $ftp->cwd("$host_path"); # $ftp->get("/ce/repertoire/ce.fichier"); $ftp->send("$save_path/*"); $ftp->quit; } sub build_backup_files { my $path_name; my $tar_cmd; my $tar_ext; my $vartemp; my @list_other_; # $where_net_ftp the_time(); -d $save_path or mkdir_p($save_path); if ($comp_mode) { $tar_cmd = "tar cvp --use-compress-program /usr/bin/bzip2 "; $tar_ext = "tar.bz2" } else { $tar_cmd = "tar cvzp "; $tar_ext = "tar.gz"} if ($where_hd) { print "backup_sys @sys_files\n"; $interactive and progress($pbar, 0.5, _("Backup system files...")); print "$save_path/backup_sys_\n"; $backup_sys_versions or system("rm -f $save_path/backup_sys*"); if ($backup_sys) { $no_critical_sys or system("$tar_cmd -f $save_path/backup_sys$the_time.$tar_ext @sys_files"); $no_critical_sys and system("$tar_cmd --exclude passwd --exclude fstab --exclude group -f $save_path/backup_sys$the_time.$tar_ext @sys_files"); } $interactive and progress($pbar, 0.5, _("Backup system files...")); $interactive and progress($pbar3, 0.3, _("Hard Disk Backup files...")); print "backup_other @list_other\n"; if (@list_other) { $backup_other_versions or system("rm -f $save_path/backup_other*"); system("$tar_cmd -f $save_path/backup_other$the_time.$tar_ext @list_other"); foreach (@list_other) { push @list_other_, $_ . "\n"; } output_p( $save_path . '/list_other', @list_other_); } $interactive and progress($pbar1, 1, _("Backup User files...")); $interactive and progress($pbar3, 0.3, _("Hard Disk Backup Progress...")); if ($backup_user) { foreach (@user_list) { $vartemp = $_; $path_name = return_path($_); print "path of user: $path_name\n"; print "the time:".$the_time."\n"; $backup_user_versions or system("rm -f $save_path/backup_user_$vartemp*"); $what_no_browser or system("$tar_cmd -f $save_path/backup_user_$vartemp$the_time.$tar_ext $path_name"); $what_no_browser and system("$tar_cmd --exclude NewCache --exclude Cache --exclude cache -f $save_path/backup_user_$vartemp$the_time.$tar_ext $path_name"); } } $interactive and progress($pbar2, 1, _("Backup Other files...")); $interactive and progress($pbar3, 0.4, _("Hard Disk Backup files...")); } if ($where_net_ssh) { # $res = Net::SSLeay::write($ssl, $msg); # Perl knows how long $msg is # die_if_ssl_error("ssl write"); # shutdown S, 1; # Half close --> No more output, sends EOF to server # $got = Net::SSLeay::read($ssl); # Perl returns undef on failure # die_if_ssl_error("ssl read"); # print $got; # Net::SSLeay::free ($ssl); # Tear down connection # Net::SSLeay::CTX_free ($ctx); # close S; } if ($where_net_ftp) { } if ($where_cd) { } } sub list_remove { my($widget, $list) = @_; my @to_remove; push @to_remove, $list->child_position($_) foreach($list->selection); splice @list_other, $_, 1 foreach(reverse sort @to_remove); $list->remove_items($list->selection); } sub file_ok_sel { my ( $widget, $file_selection ) = @_; my $file_name = $file_selection->get_filename(); if(!member($file_name, @list_other)) { push(@list_other, $file_name); $list_other->add(gtkshow(new Gtk::ListItem($file_name))); } } sub filedialog_where_hd { my $file_dialog; $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } ); $file_dialog->ok_button->signal_connect(clicked => sub { $save_path_entry->set_text($file_dialog->get_filename()); $file_dialog->destroy() }); $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() }); $file_dialog->show(); } sub filedialog { my $file_dialog; $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } ); $file_dialog->ok_button->signal_connect(clicked => \&file_ok_sel, $file_dialog); $file_dialog->ok_button->child->set(_("Add")); $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() }); $file_dialog->cancel_button->child->set(_("Close")); $file_dialog->set_filename(_("Select the files or directories and click on 'Add'")); $file_dialog->show(); } ################################################ ADVANCED ################################################ sub advanced_what_sys { my $box_what_sys; gtkpack($advanced_box, $box_what_sys = gtkpack_(new Gtk::VBox(0, 15), 1, _("\nPlease check all options that you need.\n"), 1, _("This options can backup and restore all files on your /etc directory.\n"), 0, my $check_what_sys = new Gtk::CheckButton( _("Backup your System files. (~ 2Mo)")), 0, my $check_what_versions = new Gtk::CheckButton( _("Use incremental backup (do not replace old backups)") ), 0, my $check_what_critical = new Gtk::CheckButton( _("Do not include critical files (passwd, goup, fstab)") ), 0, _("With this option you will be able to restore any version\n of your /etc directory."), 1, new Gtk::VBox(0, 15), ), ); foreach ([$check_what_sys, \$backup_sys], [$check_what_critical, \$no_critical_sys]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_what_versions, $backup_sys_versions), toggled => sub { $backup_sys_versions = $backup_sys_versions ? 0 : 1; }); $custom_help = "what"; $current_widget = \&advanced_what_sys; $previous_widget =\&advanced_what; $central_widget = \$box_what_sys; $up_box->show_all(); } sub advanced_what_user { my ($previous_function) = @_, my $box_what_user; my %check_what_user; gtkpack($advanced_box, $box_what_user = gtkpack_(new Gtk::VBox(0, 15), 0, _("Please check all user that you want to include inb your backup."), 0, new Gtk::HSeparator, 1, createScrolledWindow( gtkpack__(new Gtk::VBox(0,0), map { my $name = $_; my @user_list_tmp; my $b = new Gtk::CheckButton($name); if (grep /^$name$/, @user_list) { $check_what_user{$_}[1] = 1; gtkset_active($b, 1); } else { $check_what_user{$_}[1] = 0; gtkset_active($b, 0); } $b->signal_connect(toggled => sub { if ($check_what_user{$name}[1] ) { $check_what_user{$name}[1] = 0; @user_list_tmp = grep(!/^$name$/, @user_list); @user_list = @user_list_tmp; } else { $check_what_user{$name}[1] = 1; if (!member($name, @user_list) ) {push @user_list, $name;} } }); $b } (@all_user_list) ), ), 0, my $check_what_browser = new Gtk::CheckButton( _(" do not include the browser cache") ), 0, my $check_what_user_versions = new Gtk::CheckButton( _("Use Incremental Backups (do not replace old backups)") ), ), ); foreach ([$check_what_browser, \$what_no_browser]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_what_user_versions, $backup_user_versions), toggled => sub { $backup_user_versions = $backup_user_versions ? 0 : 1; }); $custom_help = "what"; if ($previous_function) { $previous_widget =\&$previous_function; $next_widget =\&$previous_function; } else { $previous_widget =\&advanced_what; } $current_widget = \&advanced_what_user; $central_widget = \$box_what_user; $up_box->show_all(); } sub advanced_what_other { my $box_what_other; $list_other = new Gtk::List(); $list_other->set_selection_mode(-extended); $list_other->add(gtkshow(new Gtk::ListItem($_))) foreach (@list_other); gtkpack($advanced_box, $box_what_other = gtkpack_(new Gtk::VBox(0, 15), 1, gtkpack_(new Gtk::HBox(0,4), 1, createScrolledWindow($list_other), ), 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread), gtksignal_connect(new Gtk::Button(_("Add")), clicked => sub {filedialog() }), gtksignal_connect(new Gtk::Button(_("Remove Selected")), clicked => \&list_remove, $list_other), ), 0, my $check_what_other_versions = new Gtk::CheckButton( _("Use Incremental Backups (do not replace old backups)") ), ), ); gtksignal_connect(gtkset_active($check_what_other_versions, $backup_other_versions), toggled => sub { $backup_other_versions = $backup_other_versions ? 0 : 1; }); $custom_help = "what"; $current_widget = \&advanced_what_other; $previous_widget =\&advanced_what; $central_widget = \$box_what_other; $up_box->show_all(); } sub advanced_what{ my $box_what; my ($pix_user_map, $pix_user_mask) = gtkcreate_png("user"); my ($pix_other_map, $pix_other_mask) = gtkcreate_png("net_u"); my ($pix_sys_map, $pix_sys_mask) = gtkcreate_png("bootloader"); gtkpack($advanced_box, $box_what = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(my $button_what_sys = new Gtk::Button(), clicked => sub { $box_what->destroy(); advanced_what_sys(); }), 1, gtksignal_connect(my $button_what_user = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_what_user();}), 1, gtksignal_connect(my $button_what_other = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_what_other(); }), 1, gtksignal_connect(my $button_what_all = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); message_underdevel(); }), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $button_what_sys->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_sys_map, $pix_sys_mask), new Gtk::Label(_(" System ")), new Gtk::HBox(0, 5) )); $button_what_user->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_user_map, $pix_user_mask), new Gtk::Label(_(" Users ")), new Gtk::HBox(0, 5) )); $button_what_other->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_other_map, $pix_other_mask), new Gtk::Label(_(" Other ")), new Gtk::HBox(0, 5) )); $button_what_all->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_other_map, $pix_other_mask), new Gtk::Label(_(" All ")), new Gtk::HBox(0, 5) )); $custom_help = ""; $current_widget = \&advanced_what; $previous_widget =\&advanced_box; $central_widget = \$box_what; $up_box->show_all(); } sub advanced_where_net_ftp { my ($previous_function) = @_, my $box_where_net; gtkpack($advanced_box, $box_where_net = gtkpack_(new Gtk::VBox(0, 15), 0, new Gtk::HSeparator, 0, my $check_where_net_ftp = new Gtk::CheckButton( _(" Use FTP connexion to backup") ), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("please entrer the host name or IP.")), $where_net_ftp), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $host_name_entry = new Gtk::Entry(), $where_net_ftp), ), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer the directory to\n put the backup on this host. ")), $where_net_ftp), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $host_path_entry = new Gtk::Entry(), $where_net_ftp), ), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("please entrer your login")), $where_net_ftp), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $login_user_entry = new Gtk::Entry(), $where_net_ftp), ), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("please entrer your passord")), $where_net_ftp), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $passwd_user_entry = new Gtk::Entry(), $where_net_ftp), ), 0, gtkpack_(new Gtk::HBox(0,10), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $check_remember_pass = new Gtk::CheckButton( _(" remember this password")), $where_net_ftp), ), ), ); $passwd_user_entry->set_visibility(0); $passwd_user_entry->set_text( $passwd_user ); $passwd_user_entry->signal_connect( 'changed', sub { $passwd_user = $passwd_user_entry->get_text()}); $host_path_entry->set_text( $host_path ); $host_name_entry->set_text( $host_name ); $login_user_entry->set_text( $login_user ); $host_name_entry->signal_connect( 'changed', sub { $host_name = $host_name_entry->get_text()}); $host_path_entry->signal_connect( 'changed', sub { $host_path = $host_path_entry->get_text()}); $login_user_entry->signal_connect( 'changed', sub { $login_user = $login_user_entry->get_text()}); foreach ([$check_remember_pass, \$remember_pass]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_where_net_ftp, $where_net_ftp), toggled => sub { $where_net_ftp = $where_net_ftp ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); $custom_help = "ftp"; if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where_net; } $current_widget = \&advanced_where_net_ftp; $central_widget = \$box_where_net; $up_box->show_all(); } sub advanced_where_net_ssh { my ($previous_function) = @_, my $box_where_ssh; gtkpack($advanced_box, $box_where_ssh = gtkpack_(new Gtk::VBox(0, 15), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 15), gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(new Gtk::Button("rsync"), clicked => sub { ${$central_widget}->destroy(); }), 1, gtksignal_connect(new Gtk::Button("WebDav"), clicked => sub { ${$central_widget}->destroy(); }), 1, gtksignal_connect(new Gtk::Button("scp"), clicked => sub { ${$central_widget}->destroy(); }), 1, new Gtk::VBox(0, 5), ), new Gtk::VBox(0, 15), ), ), ); # test si x11 #print system("xterm -fn 7x14 -bg black -fg white -e ssh-keygen -f ~/.ssh/identity-backup && scp ") . "\n"; if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where_net; } $custom_help = "ssh"; $current_widget = \&advanced_where_net_ssh; $previous_widget = \&advanced_where_net; $central_widget = \$box_where_ssh; $up_box->show_all(); } sub advanced_where_net { my ($previous_function) = @_, my $box_where_net; gtkpack($advanced_box, $box_where_net = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, new Gtk::VBox(0,10), 1, gtksignal_connect(new Gtk::Button(_(" FTP Connexion")), clicked => sub { $box_where_net->destroy(); if ($previous_function ) { advanced_where_net_ftp(\&$previous_function); } else { advanced_where_net_ftp(); }}), 1, gtksignal_connect(new Gtk::Button(_(" Secure Connexion ")), clicked => sub { $box_where_net->destroy(); if ($previous_function ) { advanced_where_net_ssh(\&$previous_function); } else { advanced_where_net_ssh(); }}), 1, new Gtk::VBox(0, 5), 1, new Gtk::VBox(0,10), ), 1, new Gtk::VBox(0, 5), ), ); if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where; } $custom_help = ""; $current_widget = \&advanced_where_net; $central_widget = \$box_where_net; $up_box->show_all(); } sub advanced_where_cd { my ($previous_function) = @_, my $box_where_cd; my $combo_where_cd_time = new Gtk::Combo(); $combo_where_cd_time->set_popdown_strings ("650","700", "750", "800"); gtkpack($advanced_box, $box_where_cd = gtkpack_(new Gtk::VBox(0, 6), 0, my $check_where_cd = new Gtk::CheckButton( _(" Use CD/DVDROM to backup")), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("please choose your CD space")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(gtkset_usize($combo_where_cd_time, 200, 20), $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_(" Please check if you are using CDRW media")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cdrw = new Gtk::CheckButton(), $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to erase your CDRW before")), $cdrw && $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cdrw_erase = new Gtk::CheckButton(), $cdrw && $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_(" Please check if you want to include\n install boot on your CD.")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cd_with_install_boot = new Gtk::CheckButton(), $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("please enter your CD Writer device name\n ex: 0,1,0")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_usize(gtkset_sensitive($cd_devive_entry = new Gtk::Entry(), $where_cd), 200, 20), ), ), ); foreach ([$check_cdrw_erase, \$cdrw_erase], [$check_cd_with_install_boot, \$cd_with_install_boot ]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_where_cd, $where_cd), toggled => sub { $where_cd = $where_cd ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); gtksignal_connect(gtkset_active($check_cdrw, $cdrw), toggled => sub { $cdrw = $cdrw ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); $custom_help = ""; $cd_devive_entry->set_text( $cd_devive ); $cd_devive_entry->signal_connect( 'changed', sub { $cd_devive = $cd_devive_entry->get_text(); }); $combo_where_cd_time->entry->set_text($cd_time); $combo_where_cd_time->entry->signal_connect( 'changed', sub { $cd_time = $combo_where_cd_time->entry->get_text()}); $current_widget = \&advanced_where_cd; if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where; } $central_widget = \$box_where_cd; $up_box->show_all(); } sub advanced_where_tape { my ($previous_function) = @_, my $box_where_tape; my $button; my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0; my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("filedialog"); gtkpack($advanced_box, $box_where_tape = gtkpack_(new Gtk::VBox(0, 6), 0, new Gtk::HSeparator, 0, my $check_where_tape = new Gtk::CheckButton( _(" Use tape to backup") ), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer device name where backup ")), $where_tape ), 1, new Gtk::VBox(0, 6), 0, gtkset_usize(gtkset_sensitive(my $save_device_tape_entry = new Gtk::Entry(), $where_tape), 200, 20), ), 0, new Gtk::VBox(0, 6), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer the maximum size\n allowed for Drakbackup ")), $where_tape), 1, new Gtk::VBox(0, 6), 0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_tape ), 200, 20), ), 0, gtkpack_(new Gtk::HBox(0,10), ), ), ); gtksignal_connect(gtkset_active($check_where_tape, $where_tape), toggled => sub { $where_tape = $where_tape ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); $custom_help = ""; $save_device_tape_entry->set_text( $save_device_tape ); $save_device_tape_entry->signal_connect( 'changed', sub { $save_device_tape = $save_device_tape_entry->get_text()}); $current_widget = \&advanced_where_tape; if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where; } $central_widget = \$box_where_tape; $up_box->show_all(); } sub advanced_where_hd { my ($previous_function) = @_, my $box_where_hd; my $button; my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0; my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("filedialog"); gtkpack($advanced_box, $box_where_hd = gtkpack_(new Gtk::VBox(0, 6), 0, new Gtk::HSeparator, 0, my $check_where_hd = new Gtk::CheckButton( _(" Use Hard Disk to backup") ), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer the directory to save: ")), $where_hd ), 1, new Gtk::VBox(0, 6), 0, gtkset_usize(gtkset_sensitive($save_path_entry = new Gtk::Entry(), $where_hd), 152, 20), 0, gtkset_sensitive($button = gtksignal_connect(new Gtk::Button(), clicked => sub { filedialog_where_hd();}), $where_hd ), ), 0, new Gtk::VBox(0, 6), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer the maximum size\n allowed for Drakbackup ")), $where_hd ), 1, new Gtk::VBox(0, 6), 0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_hd ), 200, 20), ), 0, gtkpack_(new Gtk::HBox(0,10), 1, new Gtk::VBox(0, 6), 0, gtkset_sensitive(my $check_where_hd_quota = new Gtk::CheckButton( _(" Use quota for backup files.")), $where_hd ), 0, new Gtk::VBox(0, 6), ), ), ); foreach ([$check_where_hd_quota, \$hd_quota]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_where_hd, $where_hd), toggled => sub { $where_hd = $where_hd ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); $custom_help = ""; $button->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_fs_map, $pix_fs_mask))); $save_path_entry->set_text( $save_path ); $save_path_entry->signal_connect( 'changed', sub { $save_path = $save_path_entry->get_text()}); $current_widget = \&advanced_where_hd; if ($previous_function) { $previous_widget =\&$previous_function; } else { $previous_widget =\&advanced_where; } $central_widget = \$box_where_hd; $up_box->show_all(); } sub advanced_where{ my $box_where; my ($pix_net_map, $pix_net_mask) = gtkcreate_png("net"); my ($pix_cd_map, $pix_cd_mask) = gtkcreate_png("cdrom"); my ($pix_hd_map, $pix_hd_mask) = gtkcreate_png("hd"); gtkpack($advanced_box, $box_where = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(my $button_where_net = new Gtk::Button(), clicked => sub { $box_where->destroy(); advanced_where_net(); }), 1, gtksignal_connect(my $button_where_cd = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_where_cd(); }), 1, gtksignal_connect(my $button_where_hd = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_where_hd(); }), 1, gtksignal_connect(my $button_where_tape = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_where_tape(); }), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $button_where_net->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_net_map, $pix_net_mask), new Gtk::Label(_(" Network ")), new Gtk::HBox(0, 5) )); $button_where_cd->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_cd_map, $pix_cd_mask), new Gtk::Label(_(" CDROM / DVDROM ")), new Gtk::HBox(0, 5) )); $button_where_hd->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_hd_map, $pix_hd_mask), new Gtk::Label(_(" HardDrive / NFS ")), new Gtk::HBox(0, 5) )); $button_where_tape->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_hd_map, $pix_hd_mask), new Gtk::Label(_(" Tape ")), new Gtk::HBox(0, 5) )); $custom_help = ""; $current_widget = \&advanced_where; $previous_widget =\&advanced_box; $central_widget = \$box_where; $up_box->show_all(); } sub advanced_when{ my $box_when; my $check_where_cd_daemon; my $check_where_hd_daemon; my $check_where_net_daemon; my ($pix_time_map, $pix_time_mask) = gtkcreate_png("backup_time"); my $combo_when_space = new Gtk::Combo(); $combo_when_space->set_popdown_strings (_("hourly"),_("daily"),_("weekly"),_("monthly")); gtkpack($advanced_box, $box_when = gtkpack_(new Gtk::VBox(0, 15), 0, gtkpack_(new Gtk::HBox(0,10), 1, new Gtk::HBox(0,10), 1, new Gtk::Pixmap($pix_time_map, $pix_time_mask), 0, my $check_when_daemon = new Gtk::CheckButton( _(" Use daemon") ), 1, new Gtk::HBox(0,10), ), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please choose interval \nspace between each backup ")), $backup_daemon), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive($combo_when_space, $backup_daemon), ), 0, new Gtk::HBox(0,10), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please choose\nmedia to backup. ")), $backup_daemon), 1, new Gtk::HBox(0,10), 0, gtkpack_(new Gtk::VBox(0,10), 0, gtkset_sensitive($check_where_cd_daemon = new Gtk::CheckButton(_(" Use CD/DVDROM with daemon")), $backup_daemon), 0, gtkset_sensitive($check_where_hd_daemon = new Gtk::CheckButton( _(" Use Hard Drive with daemon")), $backup_daemon), 0, gtkset_sensitive($check_where_net_daemon = new Gtk::CheckButton( _(" Use Network with daemon")), $backup_daemon), ), ), 0, new Gtk::HSeparator, 1, gtkset_sensitive(new Gtk::Label(_("Please be careful that cron deamon is include on your services. ")), $backup_daemon), ), ); foreach ([$check_where_cd_daemon, \$cd_daemon], [$check_where_hd_daemon, \$hd_daemon], [$check_where_net_daemon, \$net_daemon]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_when_daemon, $backup_daemon), toggled => sub { $backup_daemon = $backup_daemon ? 0 : 1; ${$central_widget}->destroy(); advanced_when(); }); $custom_help = ""; $combo_when_space->entry->set_text( $when_space ); $combo_when_space->entry->signal_connect( 'changed', sub { $when_space = $combo_when_space->entry->get_text(); print $when_space."\n";}); $current_widget = \&advanced_when; $previous_widget =\&advanced_box; $central_widget = \$box_when; $up_box->show_all(); } sub advanced_options{ my $box_options; my ($pix_options_map, $pix_options_mask) = gtkcreate_png("backup_options"); gtkpack($advanced_box, $box_options = gtkpack_(new Gtk::VBox(0, 15), 0, gtkpack_(new Gtk::HBox(0,10), 1, new Gtk::VBox(0,10), 1, new Gtk::Pixmap($pix_options_map, $pix_options_mask), 1, _("Please choose correct options to backup. "), 1, new Gtk::VBox(0,10), ), 0, new Gtk::HSeparator, 0, gtkpack_(new Gtk::VBox(0,10), 0, my $check_tar_bz2 = new Gtk::CheckButton( _(" Use Tar and bzip2 ( very slow)") ), 0, gtkset_sensitive(my $check_backupignore = new Gtk::CheckButton( _(" Use .backupignore files")), 0), ), ), ); foreach ([$check_tar_bz2, \$comp_mode], [$check_backupignore, \$backupignore]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } $custom_help = "options"; $current_widget = \&advanced_options; $previous_widget =\&advanced_box; $central_widget = \$box_options; $up_box->show_all(); } sub advanced_box{ my $box_adv; my ($pix_hd_map, $pix_hd_mask) = gtkcreate_png("backup_hd"); my ($pix_time_map, $pix_time_mask) = gtkcreate_png("backup_time"); my ($pix_net_map, $pix_net_mask) = gtkcreate_png("backup_net"); my ($pix_options_map, $pix_options_mask) = gtkcreate_png("backup_options"); gtkpack($advanced_box, $box_adv = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(my $button_what = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_what(); }), 1, gtksignal_connect(my $button_where = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_where(); }), 1, gtksignal_connect(my $button_when = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_when(); }), 1, gtksignal_connect(my $button_options = new Gtk::Button(), clicked => sub { ${$central_widget}->destroy(); advanced_options();}), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $button_what->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_hd_map, $pix_hd_mask), new Gtk::Label(_(" What ")), new Gtk::HBox(0, 5) )); $button_where->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_net_map, $pix_net_mask), new Gtk::Label(_(" Where ")), new Gtk::HBox(0, 5) )); $button_when->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_time_map, $pix_time_mask), new Gtk::Label(_(" When ")), new Gtk::HBox(0, 5) )); $button_options->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_options_map, $pix_options_mask), new Gtk::Label(_(" More Options")), new Gtk::HBox(0, 5) )); $custom_help = ""; $previous_widget =\&interactive_mode_box; $current_widget = \&advanced_box; $central_widget = \$box_adv; $up_box->show_all(); } ################################################ WIZARD ################################################ sub wizard_step3 { my $box2; my $text = new Gtk::Text(undef, undef); system_state(); gtktext_insert($text, $system_state); button_box_restore_main(); gtkpack($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, gtkpack_(new Gtk::VBox(0,10), 0, _(" Drakbackup Configuration "), 1, createScrolledWindow($text), ), ), ); button_box_wizard_end(); $custom_help = ""; $central_widget = \$box2; $current_widget = \&wizard_step3; $previous_widget =\&wizard_step2; $up_box->show_all(); } sub wizard_step2 { my $box2; gtkpack($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 0, _("Please choose where you want to backup"), 0, gtkpack_(new Gtk::HBox(0, 15), 0, my $check_wizard_hd = new Gtk::CheckButton(_("on Hard Drive")), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure it")), clicked => sub { ${$central_widget}->destroy(); advanced_where_hd(\&wizard_step2); }), $where_hd ), ), 0, gtkpack_(new Gtk::HBox(0, 15), 0, my $check_wizard_net = new Gtk::CheckButton(_("across Network")), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure it")), clicked => sub { ${$central_widget}->destroy(); advanced_where_net(\&wizard_step2); }), $where_net ), ), 0, gtkpack_(new Gtk::HBox(0, 15), 0, my $check_wizard_cd = new Gtk::CheckButton(_("on CDROM")), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure it")), clicked => sub { ${$central_widget}->destroy(); advanced_where_cd(\&wizard_step2); }), $where_cd ), ), 0, gtkpack_(new Gtk::HBox(0, 15), 0, my $check_wizard_tape = new Gtk::CheckButton(_("on Tape Device")), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure it")), clicked => sub { ${$central_widget}->destroy(); advanced_where_tape(\&wizard_step2); }), $where_tape), ), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $where_net = $where_net_ssh || $where_net_ftp; foreach ([$check_wizard_hd, \$where_hd], [$check_wizard_cd, \$where_cd], [$check_wizard_net, \$where_net], [$check_wizard_tape, \$where_tape]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; if (!$where_hd && !$where_cd && !$where_net) { $next_widget = \&message_noselect_box; } else { $next_widget = \&wizard_step3; } if(!$where_net) {$where_net_ssh = 0; $where_net_ftp = 0; } else {$where_net_ftp = 1;} ${$central_widget}->destroy(); wizard_step2(); }) } if (!$where_hd && !$where_cd && !$where_net) { $next_widget = \&message_noselect_box; } else { $next_widget = \&wizard_step3; } button_box_wizard(); $custom_help = ""; $central_widget = \$box2; $current_widget = \&wizard_step2; $previous_widget =\&wizard; $up_box->show_all(); } sub wizard { my $box2; gtkpack($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 0, _("Please choose that you want to backup"), 0, my $check_wizard_sys = new Gtk::CheckButton(_("Backup system")), 0, my $check_wizard_user = new Gtk::CheckButton(_("Backup Users")), 0, gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 0, gtksignal_connect(new Gtk::Button(_("Select user manually")), clicked => sub { ${$central_widget}->destroy(); advanced_what_user(\&wizard); }), ), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); foreach ([$check_wizard_sys, \$backup_sys], [$check_wizard_user, \$backup_user]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; if ($backup_sys || $backup_user && @user_list ) { $next_widget = \&wizard_step2; } else { $next_widget = \&message_noselect_what_box; } })} if ($backup_sys || $backup_user && @user_list ) { $next_widget = \&wizard_step2; } else { $next_widget = \&message_noselect_what_box; } button_box_wizard(); $custom_help = ""; $central_widget = \$box2; $current_widget = \&wizard; $previous_widget =\&interactive_mode_box; $up_box->show_all(); } ################################################ RESTORE ################################################ sub find_backup_to_restore { my @list_backup_tmp; my @user_backuped_tmp; @user_backuped = (); -d $save_path and my @list_backup = all($save_path); if (grep /^backup_other/, @list_backup) {$other_backuped = 1;} if (grep /^backup_sys/, @list_backup) {$sys_backuped = 1;} foreach (grep /^backup_user_/, @list_backup) { chomp; s/^backup_user_//gi; s/.tar.gz$//gi; s/.tar.bz2$//gi; my @user_date = split(/\_20/,$_ ); my @user_date2 = split(/\_/,$user_date[1] ); my $to_put = " $user_date[0], (date: 20$user_date2[0], hour: $user_date2[1])"; push @user_backuped , $to_put; } } sub do_restore_backend { my $untar_cmd; if (grep /tar.gz$/, all($save_path)) { $untar_cmd = 0; } else { $untar_cmd = 1; } if ($restore_user) { $untar_cmd or system(" echo 'user: $_' && cd /tmp && tar xfz $save_path/backup_user_$_.tar.gz -C $restore_path") foreach @user_list_to_restore; # fixme verifier next line. $untar_cmd and system("echo 'user: $_' && cd /tmp && /usr/bin/bzip2 -cd $save_path/backup_user_$_.tar.bz2 | tar xf -C $restore_path ") foreach @user_list_to_restore; } if ($restore_sys) { $untar_cmd or system("echo backup_sys && cd /tmp && tar xfz $save_path/backup_sys.tar.gz -C $restore_path "); $untar_cmd and system("echo backup_sys cd /tmp && /usr/bin/bzip2 -cd $save_path/backup_sys.tar.bz2 | tar xf -C $restore_path "); } if ($restore_other) { $untar_cmd or system("echo backup_other && cd /tmp && tar xfz $save_path/backup_other.tar.gz -C $restore_path "); $untar_cmd and system("echo backup_other && cd /tmp && /usr/bin/bzip2 -cd $save_path/backup_other.tar.bz2 | tar xf -C $restore_path "); } print "End of restore\n"; } sub system_state { $system_state = (); if ($cfg_file_exist) { $system_state .= _("\nBackup Sources: \n"); $backup_sys and $system_state .= _("\n- System Files:\n"); $backup_sys and $system_state .= _("\t\t$_\n") foreach @sys_files; $backup_user and $system_state .= _("\n- Users Files:\n"); $backup_user and $system_state .= _("\t\t$_\n") foreach @user_list; @list_other and $system_state .= _("\n- Other Files:\n"); @list_other and $system_state .= _("\t\t$_\n") foreach @list_other; $system_state .= _("\n- Path to save backups: $save_path\n"); $system_state .= _("\n- Options:\n"); $backup_sys or $system_state .= _("\tDo not include System Files\n"); if ($comp_mode) { $system_state .= _("\tBackups use tar and bzip2\n "); } else { $system_state .= _("\tBackups use tar and gzip\n"); } } else {$system_state = _("No configuration please click Wizard or Advanced.\n")} } sub restore_state { $restore_state = _("List of data to restore:\n\n"); if ($restore_sys) { $restore_state .= "- Restore System Files.\n" } if ($restore_user) { $restore_state .= "- Restore Users Files: \n" ; $restore_state .= "\t\t$_\n" foreach @user_list_to_restore2 ; push @user_list_to_restore, (split(',', $_))[0] foreach @user_list_to_restore2 ; } if ($restore_other) { $restore_state .= "- Restore Other Files: \n"; -f "$save_path/list_other" and $restore_state .= "\t\t$_\n" foreach split( "\n", cat_("$save_path/list_other")); } if ($restore_other_path) { $restore_state .= "- Path to Restore: $restore_path \n"; } } sub restore_do { my $do_restore; my $button_restore; my $text = new Gtk::Text(undef, undef); restore_state(); gtktext_insert($text, $restore_state); button_box_restore_main(); gtkpack($advanced_box, $do_restore = gtkpack_(new Gtk::VBox(0,10), 0, _(" Restore Configuration "), 1, createScrolledWindow($text), ), ); button_box_restore_end(); $previous_widget =\&restore_box; $custom_help = "restore"; $current_widget = \&restore_do; $central_widget = \$do_restore; $up_box->show_all(); } sub restore_step_other { my $retore_step_other; gtkpack($advanced_box, $retore_step_other = gtkpack_(new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 1, createScrolledWindow(gtkpack(new Gtk::VBox(0,0), gtkadd(new Gtk::Frame(_("Backup of other files content.")), gtkpack(new Gtk::VBox(0,10), cat_("$save_path/list_other"), ), ), ), ), 0, my $check_restore_other_sure = new Gtk::CheckButton(_(" Sure to restore the other files .")), 1, new Gtk::VBox(0,10), ), ); foreach ([$check_restore_other_sure, \$restore_other]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } $next_widget = \&restore_do; $custom_help = "restore"; $current_widget = \&restore_step_other; $central_widget = \$retore_step_other; $up_box->show_all(); } my %check_user_to_restore; sub restore_step_user { my $retore_step_user; @user_list_to_restore2 = sort @user_backuped; @user_backuped = @user_list_to_restore2; gtkpack($advanced_box, $retore_step_user = gtkpack_(new Gtk::VBox(0,10), 0, new Gtk::VBox(0,10), 0, _("User list to restore "), 1, createScrolledWindow( gtkpack__(new Gtk::VBox(0,0), map { my @name_l = split(/,/, $_); my $name_complet = $_; my @user_list_tmp = (); my $name = $name_l[0]; my $b = new Gtk::CheckButton($name_complet); if ( grep $name_complet, @user_list_to_restore2) { gtkset_active($b, 1); } else { gtkset_active($b, 0); } $b->signal_connect(toggled => sub { if ($check_user_to_restore{$name_complet}[1] ) { $check_user_to_restore{$name_complet}[1] = 0; if (!member(/$name_complet/, @user_list_to_restore2) ) { push @user_list_to_restore2, $name_complet;} } else { $check_user_to_restore{$name_complet}[1] = 1; foreach (@user_list_to_restore2) { if ($name_complet ne $_) { push @user_list_tmp, $_; } } @user_list_to_restore2 = @user_list_tmp; } }); $b } (@user_backuped) ), ), ), ); if ($restore_other) { $next_widget = \&restore_step_other;} else{ $next_widget = \&restore_do;} $custom_help = "restore"; $current_widget = \&restore_step_user; $central_widget = \$retore_step_user; $up_box->show_all(); } sub restore_step_sys { my $retore_step_sys; my $combo_retore_step_sys = new Gtk::Combo(); $combo_retore_step_sys->set_popdown_strings ("9 jan 2002","10 jan 2002", "11 jan 2002", "12 jan 2002"); gtkpack($advanced_box, $retore_step_sys = gtkpack_(new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 0, my $check_backup_before = new Gtk::CheckButton(_(" Backup the system files before.")), 0, gtkpack_(new Gtk::HBox(0,10), 1, _("please choose the date to restore"), 0, $combo_retore_step_sys, 0, new Gtk::HBox(0,10), ), 1, new Gtk::VBox(0,10), ), ); if ($restore_user) { $next_widget = \&restore_step_user;} elsif ($restore_other){ $next_widget = \&restore_step_other;} else{ $next_widget = \&restore_do;} $custom_help = "restore"; $current_widget = \&restore_step_sys; $central_widget = \$retore_step_sys; $up_box->show_all(); } sub restore_step2 { my $retore_step2; my $restore_other_src;# = 0; gtkpack($advanced_box, $retore_step2 = gtkpack_(new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 0, gtkpack_(new Gtk::HBox(0,10), 0, my $check_restore_other_src = new Gtk::CheckButton(_("select an other media to find backups")), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Other Media")), clicked => sub { ${$central_widget}->destroy(); # advanced_where_hd(\&wizard_step2); }), $restore_other_src ), ), 0, my $check_restore_sys = new Gtk::CheckButton(_("Restore system")), 0, my $check_restore_user = new Gtk::CheckButton(_("Restore Users")), 0, my $check_restore_other = new Gtk::CheckButton(_("Restore Other")), 0, gtkpack_(new Gtk::HBox(0,10), 0, my $check_restore_other_path = new Gtk::CheckButton(_("select path to restore (instead of / ) ")), 1, new Gtk::HBox(0,10), 0, gtkset_sensitive(my $restore_path_entry = new Gtk::Entry(), $restore_other_path), ), 1, new Gtk::VBox(0,10), ), ); foreach ([$check_restore_sys, \$restore_sys], [$check_restore_user, \$restore_user], [$check_restore_other_src, \$restore_other_src], [$check_restore_other, \$restore_other]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; if (!$restore_sys && !$restore_user && !$restore_other) { $next_widget = \&message_norestore_box; } elsif ($restore_sys && $backup_sys_versions) { $next_widget = \&restore_step_sys; } elsif ($restore_user) { $next_widget = \&restore_step_user;} elsif ($restore_other){ $next_widget = \&restore_step_other;} else{ $next_widget = \&restore_do;} }) } gtksignal_connect(gtkset_active($check_restore_other_path, $restore_other_path), toggled => sub { $restore_other_path = $restore_other_path ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); # gtksignal_connect(gtkset_active($check_restore_other_src, $restore_other_src), toggled => sub { # $restore_other_src = $restore_other_src ? 0 : 1; # ${$central_widget}->destroy(); # $current_widget->(); # }); if (!$restore_sys && !$restore_user && !$restore_other) { $next_widget = \&message_norestore_box; } elsif ($restore_sys && $backup_sys_versions) { $next_widget = \&restore_step_sys; } elsif ($restore_user) { $next_widget = \&restore_step_user;} elsif ($restore_other){ $next_widget = \&restore_step_other;} else{ $next_widget = \&restore_do;} $restore_path_entry->set_text($restore_path); $restore_path_entry->signal_connect( 'changed', sub { $restore_path = $restore_path_entry->get_text(); }); $custom_help = "restore"; $previous_widget =\&restore_box; $current_widget = \&restore_step2; $central_widget = \$retore_step2; $up_box->show_all(); } sub restore_box { my $retore_box; my $retore_box3; my $check_restore_sys; my $check_restore_user; my $check_restore_other; find_backup_to_restore(); button_box_restore_main(); if ($other_backuped || $sys_backuped || @user_backuped) { gtkpack($advanced_box, $retore_box = gtkpack_(new Gtk::HBox(0,1), 1, new Gtk::VBox(0,10), 1, gtkpack_(new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), 1, gtksignal_connect(new Gtk::Button(_("Restore all last backups")), clicked => sub { $retore_box->destroy(); button_box_restore(); $restore_sys = 1; $restore_other = 1; $restore_user = 1; restore_do(); }), 1, gtksignal_connect(new Gtk::Button(_("Custom Restore")), clicked => sub { $retore_box->destroy(); button_box_restore(); restore_step2(); }), 1, new Gtk::VBox(0,10), 1, new Gtk::VBox(0,10), ), 1, new Gtk::HBox(0,10), ), ); } else { gtkpack($advanced_box, $retore_box = gtkpack_(new Gtk::HBox(0,1), message_norestorefile_box(), ), ), } $custom_help = "restore"; $current_widget = \&restore_box; $central_widget = \$retore_box; $up_box->show_all(); } ################################################ BUTTON_BOX ################################################ sub button_box_adv { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 0, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 0, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help ); }), 1, new Gtk::HBox(0, 1), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 0, gtksignal_connect(new Gtk::Button(_(" Save ")), clicked => sub { ${$central_widget}->destroy(); save_conf_file(); $previous_widget->(); }), ), ); } sub button_box_restore_main { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(gtkpack(gtkset_layout(new Gtk::HButtonBox, -start), gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget, $custom_help); }), ), ), ); } sub button_box_backup_end { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 0, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 0, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help ); }), 1, new Gtk::HBox(0, 1), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 0, gtksignal_connect(new Gtk::Button(_(" Build Backup ")), clicked => sub { ${$central_widget}->destroy(); build_backup_status(); build_backup_files(); }), ), ); } sub button_box_wizard_end { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 0, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 0, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help ); }), 1, new Gtk::HBox(0, 1), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 0, gtksignal_connect(new Gtk::Button(_(" Save ")), clicked => sub { ${$central_widget}->destroy(); save_conf_file(); interactive_mode_box(); }), ), ); } sub button_box_restore_end { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 0, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 0, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help ); }), 1, new Gtk::HBox(0, 1), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 0, gtksignal_connect(new Gtk::Button(_(" Restore ")), clicked => sub { ${$central_widget}->destroy(); do_restore_backend(); }), ), ); } sub button_box_build_backup_end { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack(gtkset_layout(new Gtk::HButtonBox, -start), gtksignal_connect(new Gtk::Button(_(" Close ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), ), ); } sub button_box_build_backup { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 1, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 1, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }), 1, new Gtk::HBox(0, 0), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 1, gtksignal_connect(new Gtk::Button(_(" Next ")), clicked => sub { ${$central_widget}->destroy(); $next_widget->(); }), ), ); } sub button_box_restore { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 1, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 1, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }), 1, new Gtk::HBox(0, 0), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 1, gtksignal_connect(new Gtk::Button(_(" Next ")), clicked => sub { ${$central_widget}->destroy(); $next_widget->(); }), ), ); } sub button_box_wizard { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 1, gtksignal_connect(new Gtk::Button(_(" Cancel ")), clicked => sub { ${$central_widget}->destroy(); interactive_mode_box(); }), 1, gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }), 1, new Gtk::HBox(0, 0), 0, gtksignal_connect(new Gtk::Button(_(" Previous ")), clicked => sub { ${$central_widget}->destroy(); $previous_widget->(); }), 1, gtksignal_connect(new Gtk::Button(_(" Next ")), clicked => sub { ${$central_widget}->destroy(); $next_widget->(); }), ), ); } sub button_box_main { $button_box_tmp->destroy(); gtkpack($button_box, $button_box_tmp = gtkpack(gtkset_layout(new Gtk::HButtonBox, -start), gtksignal_connect(new Gtk::Button(_("close")), clicked => sub { Gtk->main_quit() }), gtksignal_connect(new Gtk::Button(_(" Help ")), clicked => sub { ${$central_widget}->destroy(); adv_help(\&interactive_mode_box,$custom_help) }), ), ); } ################################################ MESSAGES ################################################ sub message_norestorefile_box { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _("Please Build backup before to restore it...\n or verify that your path to save is correct."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); button_box_restore_main(); $central_widget = \$box2; $up_box->show_all(); } sub message_norestore_box { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _(" Please check data to restore..."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); button_box_restore_main(); $central_widget = \$box2; $up_box->show_all(); } sub message_noselect_box { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _(" Please check way where backup..."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $previous_widget = \&wizard_step2; $next_widget = \&wizard_step2; $central_widget = \$box2; $up_box->show_all(); } sub message_noselect_what_box { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _(" Please check data to backup..."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $previous_widget = \&wizard; $next_widget = \&wizard; $central_widget = \$box2; $up_box->show_all(); } sub message_noconf_box { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _(" No configuration file found \nplease click Wizard or Advanced."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); button_box_restore_main(); $central_widget = \$box2; $up_box->show_all(); } sub message_underdevel { $box2->destroy(); my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning'); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack(new Gtk::HBox(0, 15), new Gtk::VBox(0, 5), new Gtk::Pixmap($pix_warn_map, $pix_warn_mask), _(" Under Devel ... please wait."), new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); button_box_restore_main(); $central_widget = \$box2; $up_box->show_all(); } ################################################ BUILD_BACKUP ################################################ sub progress { my ($progressbar, $incr, $label_text) = @_; my($new_val) = $progressbar->get_current_percentage; $new_val += $incr; if ($new_val > 1) {$new_val = 1} $progressbar->update($new_val); $progressbar->{label}->set($label_text); Gtk->main_iteration while Gtk->events_pending; } sub find_backup_to_put_on_cd { my @list_backup_tmp; my @data_backuped_tmp; @data_backuped = (); -d $save_path and my @list_backup = all($save_path); foreach (grep /^backup_other/, @list_backup) { $other_backuped = 1; chomp; my $tail = (split(' ',`du $save_path/$_` ))[0] ; s/^backup_other//gi; s/.tar.gz$//gi; s/.tar.bz2$//gi; my @user_date = split(/\_20/,$_ ); my @user_date2 = split(/\_/,$user_date[1] ); my $to_put = " other_data, (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])"; push @data_backuped , $to_put; } foreach (grep /^backup_sys/, @list_backup) { $sys_backuped = 1; chomp; my $tail = (split(' ',`du $save_path/$_` ))[0] ; s/^backup_other//gi; s/.tar.gz$//gi; s/.tar.bz2$//gi; my @user_date = split(/\_20/,$_ ); my @user_date2 = split(/\_/,$user_date[1] ); my $to_put = " system, (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])"; push @data_backuped , $to_put; } foreach (grep /^backup_user_/, @list_backup) { chomp; my $tail = (split(' ',`du $save_path/$_` ))[0] ; s/^backup_user_//gi; s/.tar.gz$//gi; s/.tar.bz2$//gi; my @user_date = split(/\_20/,$_ ); my @user_date2 = split(/\_/,$user_date[1] ); my $to_put = " $user_date[0], (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])"; push @data_backuped , $to_put; } } sub build_backup_status { my $table; $pbar = new Gtk::ProgressBar; $pbar1 = new Gtk::ProgressBar; $pbar2 = new Gtk::ProgressBar; $pbar3 = new Gtk::ProgressBar; button_box_build_backup_end(); gtkpack($advanced_box, $table = create_packtable({ col_spacings => 10, row_spacings => 5}, [""], [""], [""], [""], [""], [""], [""], [""], [_("Backup system files")], [ $pbar, $pbar->{label} = new Gtk::Label(' ' )], [_("Backup user files") ], [$pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ], [_("Backup other files")], [ $pbar2, $pbar2->{label} = new Gtk::Label(' ' ) ], [_("Total Progress")], [$pbar3,$pbar3->{label} = new Gtk::Label(' ' ) ], ), ); $custom_help = "options"; $central_widget = \$table; $up_box->show_all(); Gtk->main_iteration while Gtk->events_pending; } sub build_backup_box_see_conf { my $box2; my $text = new Gtk::Text(undef, undef); system_state(); gtktext_insert($text, $system_state); button_box_restore_main(); gtkpack($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, gtkpack_(new Gtk::VBox(0,10), 0, _(" Drakbackup Configuration "), 1, createScrolledWindow($text), ), ), ); button_box_backup_end(); $custom_help = ""; $central_widget = \$box2; $current_widget = \&build_backup_box_see_conf; $previous_widget =\&build_backup_box; $up_box->show_all(); } sub build_backup_box_progress { # build_backup_files(); } sub aff_total_tail { my @toto = (); my $total = 0; push @toto, (split (",", $_))[1] foreach @user_list_to_build_on_cd; foreach (@toto) { s/\s+\(tail://gi; s/\s+//gi; s/ko//gi; $total += $_; } $label_tail->set("total tail: $total ko"); } my %check_data_to_backup_cd; sub build_backup_cd_select_data { my $retore_step_user; find_backup_to_put_on_cd(); @user_list_to_build_on_cd = sort @data_backuped; @data_backuped = @user_list_to_build_on_cd; gtkpack($advanced_box, $retore_step_user = gtkpack_(new Gtk::VBox(0,10), 0, new Gtk::VBox(0,10), 0, _(" Data list to include on CDROM. "), 1, createScrolledWindow( gtkpack__(new Gtk::VBox(0,0), map { my $name = $_; my @user_list_tmp = (); my $b = new Gtk::CheckButton($name); if ( grep $name , @user_list_to_build_on_cd) { gtkset_active($b, 1); } else { gtkset_active($b, 0); } $b->signal_connect(toggled => sub { if ($check_data_to_backup_cd{$name}[1] ) { $check_data_to_backup_cd{$name}[1] = 0; if (!member( /$name$/, @user_list_to_build_on_cd) ) { push @user_list_to_build_on_cd, $name;} } else { $check_data_to_backup_cd{$name}[1] = 1; foreach (@user_list_to_build_on_cd) { if ($name ne $_) { push @user_list_tmp, $_; } } @user_list_to_build_on_cd = @user_list_tmp; } aff_total_tail(); }); $b } (@data_backuped) ), ), 0, new Gtk::HSeparator, 0, $label_tail = new Gtk::Label(" "), 0, new Gtk::HSeparator, ), ); aff_total_tail(); $next_widget = \&build_backup_box_see_conf; $custom_help = "restore"; $previous_widget = \&build_backup_cd_box; $current_widget = \&restore_step_user; $central_widget = \$retore_step_user; $up_box->show_all(); } sub build_backup_cd_box { my $box_build_backup_cd; my $combo_where_cd_time = new Gtk::Combo(); my $adj = new Gtk::Adjustment 4.0, 1.0, 10000.0, 1.0, 5.0, 0.0; $combo_where_cd_time->set_popdown_strings ("650","700", "750", "800"); button_box_build_backup(); gtkpack($advanced_box, $box_build_backup_cd = gtkpack_(new Gtk::VBox(0, 6), 0, my $check_where_cd = new Gtk::CheckButton( _(" Use CD/DVDROM to backup")), 0, new Gtk::HSeparator, 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please choose your CD space")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_usize(gtkset_sensitive($combo_where_cd_time, $where_cd), 100, 20), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please entrer the cd writer speed ")), $where_cd ), 1, new Gtk::VBox(0, 6), 0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_cd ), 100, 20), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please check if you are using CDRW media")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cdrw = new Gtk::CheckButton(), $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to erase your CDRW before")), $cdrw && $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cdrw_erase = new Gtk::CheckButton(), $cdrw && $where_cd), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please enter your CD Writer device name (ex: 0,1,0)")), $where_cd), 1, new Gtk::VBox(0, 5), 0, gtkset_usize(gtkset_sensitive($cd_devive_entry = new Gtk::Entry(), $where_cd), 100, 20), ), 0, new Gtk::VBox(0, 5), 0, gtkpack_(new Gtk::HBox(0,10), 0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to include install boot on your CD.")), 0), 1, new Gtk::VBox(0, 5), 0, gtkset_sensitive(my $check_cd_with_install_boot = new Gtk::CheckButton(), 0), ), ), ); foreach ([$check_cdrw_erase, \$cdrw_erase], [$check_cd_with_install_boot, \$cd_with_install_boot ]) { my $ref = $_->[1]; gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; }) } gtksignal_connect(gtkset_active($check_where_cd, $where_cd), toggled => sub { $where_cd = $where_cd ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); if($where_cd) { $next_widget = \&build_backup_cd_select_data;} else { $next_widget = \&build_backup_cd_box;} }); gtksignal_connect(gtkset_active($check_cdrw, $cdrw), toggled => sub { $cdrw = $cdrw ? 0 : 1; ${$central_widget}->destroy(); $current_widget->(); }); if($where_cd) { $next_widget = \&build_backup_cd_select_data;} else { $next_widget = \&build_backup_cd_box;} $cd_devive_entry->set_text( $cd_devive ); $cd_devive_entry->signal_connect( 'changed', sub { $cd_devive = $cd_devive_entry->get_text(); }); $combo_where_cd_time->entry->set_text($cd_time); $combo_where_cd_time->entry->signal_connect( 'changed', sub { $cd_time = $combo_where_cd_time->entry->get_text()}); $current_widget = \&build_backup_cd_box; $previous_widget =\&build_backup_box; $central_widget = \$box_build_backup_cd; $up_box->show_all(); } sub build_backup_box { $box2->destroy(); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(new Gtk::Button(_(" Backup Now from configuration file ")), clicked => sub { ${$central_widget}->destroy(); build_backup_box_see_conf(); }), 0, new Gtk::VBox(0, 5), 1, gtksignal_connect(new Gtk::Button(_(" Backup Now on CDROM ")), clicked => sub { ${$central_widget}->destroy(); $where_cd = 1; build_backup_cd_box(); }), 0, new Gtk::VBox(0, 5), 1, gtksignal_connect(new Gtk::Button(_(" View Backup Configuration. ")), clicked => sub { ${$central_widget}->destroy(); build_backup_box_see_conf(); }), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); $custom_help = "options"; button_box_restore_main(); $central_widget = \$box2; $current_widget = \&build_backup_box; $up_box->show_all(); } ################################################ INTERACTIVE ################################################ sub interactive_mode_box { $box2->destroy(); gtkadd($advanced_box, $box2 = gtkpack_(new Gtk::HBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtkpack_(new Gtk::VBox(0, 15), 1, new Gtk::VBox(0, 5), 1, gtksignal_connect(new Gtk::Button(_(" Advanced Configuration ")), clicked => sub { button_box_adv(); ${$central_widget}->destroy(); advanced_box(); }), 1, gtksignal_connect(new Gtk::Button(_(" Wizard Configuration ")), clicked => sub { ${$central_widget}->destroy(); read_conf_file(); wizard(); }), 1, gtksignal_connect(new Gtk::Button(_(" Backup Now ")), clicked => sub { ${$central_widget}->destroy(); if ($cfg_file_exist) { build_backup_box();} else { message_noconf_box();} }), 1, gtksignal_connect(new Gtk::Button(_(" Restore ")), clicked => sub {${$central_widget}->destroy(); restore_box();}), 1, new Gtk::VBox(0, 5), ), 1, new Gtk::VBox(0, 5), ), ); button_box_main(); $custom_help = "main"; $central_widget = \$box2; $up_box->show_all(); } sub interactive_mode { $interactive = 1; my $box; my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel; init Gtk; $window1->signal_connect (delete_event => sub { Gtk->exit(0) }); $window1->set_position(1); $window1->set_title(_("Drakbackup")); my ($pix_u_map, $pix_u_mask) = gtkcreate_png("backup_title"); my ($pix_l_map, $pix_l_mask) = gtkcreate_png("backup_left2"); my ($pix_r_map, $pix_r_mask) = gtkcreate_png("backup_bot2"); read_conf_file(); gtkadd($window1, gtkpack(new Gtk::VBox(0,0), gtkpack(gtkset_usize($up_box = new Gtk::VBox(0, 5), 500, 420), $box = gtkpack_(new Gtk::VBox(0, 3), 0, new Gtk::Pixmap($pix_u_map, $pix_u_mask), 1, gtkpack_(new Gtk::HBox(0, 3), # 0, new Gtk::Pixmap($pix_l_map, $pix_l_mask), 1, gtkpack_(new Gtk::HBox(0, 15), 0, new Gtk::HBox(0, 5), 1, $advanced_box = gtkpack_(new Gtk::HBox(0, 15), 1, $box2 = gtkpack_(new Gtk::VBox(0, 15), ), ), 0, new Gtk::HBox(0, 5), ), ), # 0, new Gtk::Pixmap($pix_r_map, $pix_r_mask), 0, new Gtk::HSeparator, 0, $button_box = gtkpack(new Gtk::VBox(0, 15), $button_box_tmp = gtkpack(new Gtk::VBox(0, 0), ), ), ), ), ), ); interactive_mode_box(); $custom_help = "main"; button_box_main(); $central_widget = \$box2; $window1->show_all; $window1->realize; $window1->show_all(); Gtk->main; Gtk->exit(0); } ################################################ HELP & ABOUT ################################################ sub about { my $text = new Gtk::Text(undef, undef); my $about_box; gtkpack($up_box, $about_box = gtkpack_(new Gtk::VBox(0,10), 1, gtkpack_(new Gtk::HBox(0,0), 1, gtktext_insert(gtkset_editable($text, 1), _(" ")), 0, new Gtk::VScrollbar($text->vadj), ), 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread), gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); interactive_mode(); }), ), ) ); $central_widget = \$about_box; $up_box->show_all(); } sub adv_help { my ($function, $custom_help) = @_, my $text = new Gtk::Text(undef, undef); my $advanced_box_help; if ($custom_help eq "toto") { gtktext_insert($text, _("toto")); } elsif ($custom_help eq "options") { gtktext_insert($text, _("options description: In this step Drakbacup allow you to change: - the compression mode: if you check bzip2 compression, you will compress better than gzip your data (about 2-10 %). This options are not checked by default because this compression mode need more time ( about 1000% more). - the udpate mode: This options will update your backup, but this options are not really interesting because you need to decompress your backup before to update it. - the .backupignore mode: Like with cvs, Drakbackup will ignore all references included on .backupignore files in each directories. ex: \$> cat .backupignore *.o *~ ... ")); } elsif ($custom_help eq "what") { gtktext_insert($text, _("options description: - Backup system files: This options allow you to backup your /etc directory, which contain all configuration files please be carreful during restore step to not overwriting /etc/passwd /etc/group /etc/fstab - Backup User files: This option allow to select all users that you want to backup. To preserve disk space, it recommeded to not include browsers cache. - Backup User files: This option allow to add more data to save. - Incremental Backups: The incremental backup is the most powerfull option to use backup, this option allow you to backup all your data the first time, and only the changed data after. So you will be able during the restore step, to restore your data from a specified date. If you have not selected this options all old backups are deleted before each backup. ")); } elsif ($custom_help eq "main") { gtktext_insert($text, _(" Copyright (C) 2001 by MandrakeSoft (sdupont\@mandrakesoft.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. _____________________ description: Drakbacup is use to backup your system. During the configuration you can select - System files, - Users files, - Other files. or All your system ... and Other (like windows Partitions) Drakbacup allow you to backup your system on: - Harddrive. - NFS. - CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.). - FTP. - Rsync. - Webdav. - Tape. Drakbacup allow you to Restore your system on choosen directory. Per default all backup will be stored on your /var/drakbackup directory configuration file: /etc/drakconf/drakbackup/drakbakup.conf ")); } elsif ($custom_help eq "ftp") { gtktext_insert($text, _("options description: Please be careful when you are using ftp backup, because only backup already build are send on server. So in moment, you need to build backup on your hard drive before to send it. ")); } else { gtktext_insert($text, _(" Copyright (C) 2001 by MandrakeSoft (sdupont\@mandrakesoft.com) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. _____________________ description: Drakbacup is use to backup your system. During the configuration you can select - System files, - Users files, - Other files. or All your system ... and Other (like windows Partitions) Drakbacup allow you to backup your system on: - Harddrive. - NFS. - CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.). - FTP. - Rsync. - Webdav. - Tape. Drakbacup allow you to Restore your system on choosen directory. Per default all backup will be stored on your /var/drakbackup directory configuration file: /etc/drakconf/drakbackup/drakbakup.conf "));} gtkpack($advanced_box, $advanced_box_help = gtkpack_(new Gtk::VBox(0,10), 1, gtkpack_(new Gtk::HBox(0,0), 1, $text, 0, new Gtk::VScrollbar($text->vadj), ), 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread), gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); $function->(); }), ), ) ); $central_widget = \$advanced_box_help; $up_box->show_all(); } sub restore_help { my $text = new Gtk::Text(undef, undef); my $about_box; gtkpack($up_box, $about_box = gtkpack_(new Gtk::VBox(0,10), 1, gtkpack_(new Gtk::HBox(0,0), 1, gtktext_insert(gtkset_editable($text, 1), _(" Description: Drakbacup Restore Mode. Drakbacup allow to restore the system (etc, var files) from starup or on drakconf utility. system backup: backup_sys.tar.gz user backup backup_user_james.tar.gz backup_user_seb.tar.gz other directories backup_other.tar.gz ")), 0, new Gtk::VScrollbar($text->vadj), ), 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread), gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); restore(); }), ), ) ); $central_widget = \$about_box; $up_box->show_all(); } # _____________________________________________________________ OLD CODE # _____________________________________________________________ DOCS # Comment r�cup�rer la date du jour ? # Cf perldoc -f localtime # ($seconde,$minute,$heure,$jour_du_mois,$annee, # $jour_de_la_semaine,$jour_de_l _annee,$drapeau_heure_ete) = localtime(time); # Il faut ajouter 1900 a l'ann�e pour une date correcte ($annee+=1900) et 1 au jour du mois pour obtenir une date correcte ($jour_du_mois++). # [Perl] Comment r�cup�rer des informations sur un fichier ? # Cf perldoc -f stat # Exemple pour r�cup�rer mtime (date de derni�re modification du fichier) # my(@etat); my($fchier)="/tmp/toto"; # # Si le fichier existe on r�cup�re des infos dessus # if (-e $fchier) {@etat=stat($fchier); } # # On convertit avec localtime la valeur de mtime. # my($date)= localtime($etat[9]); # print $date; #Telnet : En utilisant le package Net::Telnet # use strict; # use Net::Telnet; # use CGI qw/:standard :html3 :netscape escape unescape/; # use CGI::Carp qw/fatalsToBrowser/; # my $username="alian"; # my $passwd="password"; # my $HOST="indy.alianet"; # print header; # my $t = new Net::Telnet (Timeout=>undef) or die "Can't connect:$!"; # $t->open($HOST); # $t->login($username, $passwd); # my @lines = $t->cmd("/ma/commande/a/executer"); # print join(' ',@lines);