# Copyright (C) 2004 Free Software Foundation, Inc.
# Omi Azad <omi@altruists.org>, 2004.
# Khandakar Mujahidul Islam <suzan@BengaLinux.Org>, 2004.
# Progga <progga@BengaLinux.Org>, 2004.
# Jamil Ahmed <jamil@BengaLinux.Org>, 2004, 2005.
# Samia <mailsamia2001@yahoo.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX HEAD\n"
"POT-Creation-Date: 2005-05-22 20:07+0200\n"
"PO-Revision-Date: 2005-03-19 23:18+0600\n"
"Last-Translator: Samia <mailsamia2001@yahoo.com>\n"
"Language-Team: Bangla <mdk-translation@bengalinux.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "আপনি কোন ইউএসবি ডিস্ক ফরম্যাট করতে চান?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"আপনি একটি ইউএসবি যন্ত্র \"%s\" ফরম্যাট করতে যাচ্ছেন। সেটি এটাতে থাকা সব তথ্য মুছে "
"ফেলবে।\n"
"নিশ্চিত হোন যে চিহ্নিত যন্ত্রটিই সেই ইউএসবি যন্ত্র যা আপনি ফরম্যাট করতে চান। \n"
"আমাদের পরামর্শ হচ্ছে এই কাজ করার সময় অন্যান্য ইউএসবি স্টোরেজ জন্য খুলে ফেলুন।"
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "ডিস্ক লেখবার উপযোগী না"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে।\n"
"অনুগ্রহ করে এটা আন-প্লাগ করে রইট প্রটেকশন অপসরন করে\n"
"আবার ইউএসবি ডিস্ক প্লাগ-ইন করুন।"
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "আবার চেষ্টা"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "ইউএসবি ডিস্ক ছাড়াই অগ্রসর হও"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে, কিন্তু এখন\n"
"আমরা নিরাপদভাবে এটা আন-প্লাগও করতে পারছিনা।\n"
"\n"
"\n"
"এই বাটনে ক্লিক করে আপনার মেশিন রিবুট করে ইউএসবি ডিস্ক\n"
"আনপ্লাগ করুন এবং রইট প্রটেকশন অপসরন করে আবার\n"
"ইউএসবি ডিস্ক প্লাগ-ইন করে ম্যান্ড্রিব মুভ চালু করুন।"
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
#, c-format
msgid "Reboot"
msgstr "রিবুট"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"আপনার ইউএসবি ডিস্কে কোন উইন্ডোজ (FAT) পার্টিশন নেই।\n"
"অগ্রসর হওয়ার জন্য আমাদের উইন্ডোজ (FAT) পার্টিশনের প্রয়োজন\n"
"(যেহেতু উইন্ডোজ চালিত মেশিনসমূহ থেকে ফাইল নিতে বা ব্যবহার\n"
"করার জন্য এটাই সবচাইতে আদর্শ উপায়)। অনুগ্রহ করে\n"
"এই ইউএসবি ডিস্ক বদলে উইন্ডোজ (FAT) পার্টিশন সম্বলিত একটি ইউএসবি ডিস্ক\n"
"সংযুক্ত করুন।\n"
"\n"
"\n"
"আপনি ইউএসবি Key ছাড়াই অগ্রসর হতে পারেন - এখনো আপনি\n"
"ম্যান্ড্রিব মুভকে সাধারণ লাইভ ম্যান্ড্রিব অপারেটিং সিস্টেম\n"
"হিসেবে ব্যবহার করতে পারবেন।"
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"আমরা আপনার সিস্টেমে কোন ইউএসবি ড্রাইভ সনাক্ত করতে\n"
"পারি নাই। আপনা যদি এখন একটু ইউএসবি ড্রাইভ প্লাগ-ইন\n"
"করেন তাহলে এই কম্পিউটারে অথবা অন্য কোন\n"
"কম্পিউটারে পরবর্তি বুটের জন্য ম্যান্ড্রিব মুভ আপনার\n"
"সিস্টেমের কনফিগারেশন এবং হোম ডিরেক্টরির\n"
"ফাইলসমূহ সেখানে সংরক্ষণ করতে পারবে।\n"
"দ্রষ্টব্য: যদি আপনি এখন একটি ইউএসবি ড্রাইভ প্লাগ-ইন\n"
"করেন, তাহলে কিছুক্ষণ অপেক্ষার করতে হবে\n"
"চিহ্নিত করার জন্য।\n"
"\n"
"\n"
"আপনি ইউএসবি ড্রাইভ ছাড়াই অগ্রসর হয়ে ম্যান্ড্রিব \n"
"মুভকে সাধারন লাইভ ম্যান্ড্রিব অপরেটিং সিস্টেম\n"
"হিসেবে ব্যবহার করতে পারেন।"
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "আপনার ডেটা সংরক্ষনের জন্য একটি ডিস্কের প্রয়োজন"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "আবারও একটি ইউএসবি ডিস্ক সনাক্ত হয়েছে"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "ইউএসবি ডিস্ক সেট করা হচ্ছে"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"অনুগ্রহ করে অপেক্ষা করুন, ইউএসবি ডিস্কে সিস্টেম কনফিগারেশন ফাইল সেট করা হচ্ছে..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "স্ক্রীন সেভারে ব্যবহারের জন্য ব্যবহারকারীর তথ্য, পাসওয়ার্ড প্রবেশ করান"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "স্বয়ংক্রিয় কনফিগারেশন"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "অনুগ্রহ করে অপেক্ষা করুন, ডিভাইসগুলি সনাক্ত এবং কনফিগার করা হচ্ছে..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:1013 network/netconnect.pm:1121
#: network/netconnect.pm:1125 network/netconnect.pm:1129
#: network/netconnect.pm:1134 network/netconnect.pm:1266
#: network/netconnect.pm:1270 network/netconnect.pm:1274
#: network/netconnect.pm:1278 network/netconnect.pm:1386
#: network/netconnect.pm:1391 network/netconnect.pm:1411
#: network/netconnect.pm:1622 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
#: standalone/drakTermServ:393 standalone/drakTermServ:467
#: standalone/drakTermServ:476 standalone/drakTermServ:771
#: standalone/drakTermServ:778 standalone/drakTermServ:801
#: standalone/drakTermServ:847 standalone/drakTermServ:1023
#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1643 standalone/drakbackup:1799
#: standalone/drakbackup:2413 standalone/drakbackup:4102
#: standalone/drakbackup:4322 standalone/drakclock:124
#: standalone/drakconnect:683 standalone/drakconnect:687
#: standalone/drakconnect:692 standalone/drakconnect:707
#: standalone/drakfloppy:297 standalone/drakfloppy:300
#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
#, c-format
msgid "Error"
msgstr "ত্রুটি"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"একটি ত্রুটি সম্পাদিত হয়েছে, কিন্তু আমি বুঝতে পারছিনা\n"
"কিভাবে এটা সন্দরভাবে হ্যান্ডল করবো।\n"
"আপনি নিজের ঝুঁকিতে অগ্রসর হতে পারেন।"
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "একটি ত্রুটি সম্পাদিত হয়েছে"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"একটি ত্রুটি সম্পাদিত হয়েছে:\n"
"\n"
"\n"
"%s\n"
"\n"
"ইউএসবি ডিস্কের থাকা নষ্ট কনফিগারেশন ফাইলের কারনে\n"
"এরকম হতে পারে, সেরকম হলে সেগুলি অপসরণ করে\n"
"ম্যান্ড্রিব মুভ চালালে সমস্যার সমাধান হতে পারে।\n"
"সেরকম করার জন্য নির্ধারিত বাটনটিতে ক্লিক করুন।\n"
"\n"
"\n"
"আপনি হয়তো রিবুট করে ইউএসবি ড্রাইভ রিমুভ করে\n"
"কন্টেন্টগুলি অন্য OS-এ নিয়ে পর্যবেক্ষন করতে চান, অথবা\n"
"কনসল #3 এবং #4-এ দেখে আন্দাজ করার চেষ্টা করতে\n"
"পারেন কি হয়েছে।"
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "সিস্টেম কনফিগ ফাইলসমূহ অপসরণ করো"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "শুধু রিবুট করো"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "আপনি কোন সিডিরম সাপোর্ট ছাড়াই শুধু রান করতে পারেন"
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "ঐ সমস্থ প্রোগ্রামকে মেরে ফেলো"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "সিডিরমের কোন সাপোর্ট নেই"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
#: diskdrake/interactive.pm:1102
#, c-format
msgid "Read carefully!"
msgstr "সতর্কতার সাথে পড়ো!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"নিম্নবর্তি প্রোগ্রামগুলি চলাকালীন আপনি অন্য সিডিরম ব্যবহার করতে পারবেননা:\n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "সিডিরম অপসরণ করার জন্য মেমরীতে কপি করে নেয়া হচ্ছে"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "২৫৬ কেবি"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "৫১২ কেবি"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "১ এমবি"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "২ এমবি"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "৪ এমবি"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "৮ এমবি"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "১৬ এমবি"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "৩২ এমবি"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "৬৪ এমবি অথবা আরও বেশী"
#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "X সার্ভার"
#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "একটি X সার্ভার পছন্দ করুন"
#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head কনফিগারেশন"
#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"আপনার সিস্টেম Multiple Head কনফিগারেশন সাপোর্ট করে।\n"
"আপনা কি করতে চান?"
#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Xorg প্যাকেজ ইনস্টল করা যাচ্ছেনা: %s"
#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "আপনার গ্রাফিক কার্ডের জন্য মেমরী সাইজ নির্ধারন করুন"
#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Xorg কনফিগারেশন"
#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Xorg-এর কোন কনফিগারেশন আপনি রাখতে চান?"
#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr "সমস্থ head-গুলিকে আলাদাভাবে কনফিগার কারো"
#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "Xinerama এক্সটেনশন ব্যবহার করো"
#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "শুধু \"%s\"%s কার্ড কনফিগ করো"
#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "3D হার্ডওয়্যারের গতি সম্পন্ন %s Xorg"
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "আপনি Xorg %s-এ 3D হার্ডওয়্যারের গতির সুবিধা উপভোগ করতে পারেন।"
#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "পরীক্ষামূলক 3D হার্ডওয়্যারের গতির সাথে Xorg %s"
#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"আপনার কার্ডটি Xfree %s-এর মাধ্যমে 3D হার্ডওয়্যারের গতি পেতে পারে,\n"
"লক্ষ্য রাখবেন যে এটা একটি পরীক্ষামূলক সাপোর্ট এবং আপনার কম্পিউটার অচল হয়ে যেতে "
"পারে।"
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
#, c-format
msgid "Custom"
msgstr "ব্যবস্থা"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "বাহির"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "গ্রাফিক কার্ড"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "মনিটর"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
#, c-format
msgid "Resolution"
msgstr "রেজুলেশন"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "পরীক্ষা"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "অপশন"
# সাম: broken কি সেন্সে ব্যবহৃত হয়েছে?
# অসম্পূর্ণ নাকি corrupt?
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "আপনার Xorg কনফিগারেশন ফাইলটি অসম্পূর্ণ, এটি অগ্রাহ্য করছি। "
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"পরিবর্নগুলি রাখব?\n"
"বর্তমান কনফিগারেশনগুলি হচ্ছে:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Head #%d -এর জন্য একটি মনিটর পছন্দ করুন"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "একটি মনিটর পছন্দ করুন"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "প্লাগ'এন প্লে"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "সাধারন"
#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
#: standalone/harddrake2:87
#, c-format
msgid "Vendor"
msgstr "পরিবেশক"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "প্লাগ'এন প্লে অনুসন্ধান ব্যার্থ হয়েছে। অনুগ্রহ করে সঠিক মনিটর নির্বাচন করুন"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"দুইটি জরুরী প্যারামিটার হচ্ছে উল্লম্ব রিফ্রেশ মাত্রা, যেই মাত্রাটি হচ্ছে\n"
"যেটাতে সম্পূর্ণ স্ক্রীন রিফ্রেশ হয়, এবং সবচেয়ে বেশি প্রয়োজনীয় হচ্ছে আনুভূমিক\n"
"sync মাত্রা, যেটাতে স্ক্যানলাইনগুলো প্রদর্শিত হয়।\n"
"\n"
"এটা খুব গুরুত্বপূর্ণ যে"
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horizontal রিফ্রেশ রেট"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertical রিফ্রেশ রেট"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "২৫৬ রঙ (৮ বিট)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "৩২ হাজার রঙ (১৫ বিট)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "৬৫ হাজার রঙ (১৬ বিট)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "১৬ লক্ষ রঙ (২৪ বিট)"
#: Xconfig/resolution_and_depth.pm:129
#, c-format
msgid "Resolutions"
msgstr "রেজুলেশন"
#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1581 standalone/drakperm:251
#, c-format
msgid "Other"
msgstr "অন্যান্য"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "রঙের রেজুলেশন এবং গভীরতার পছন্দ করুন"
#: Xconfig/resolution_and_depth.pm:360
#, c-format
msgid "Graphics card: %s"
msgstr "%s গ্রাফিক কার্ড"
#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:200 standalone/drakTermServ:518
#: standalone/drakbackup:1345 standalone/drakbackup:3959
#: standalone/drakbackup:4019 standalone/drakbackup:4063
#: standalone/drakconnect:166 standalone/drakconnect:885
#: standalone/drakconnect:972 standalone/drakconnect:1071
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
#, c-format
msgid "Ok"
msgstr "ঠিক আছে"
#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:217 standalone/drakbackup:1345
#: standalone/drakbackup:3885 standalone/drakbackup:3889
#: standalone/drakbackup:3947 standalone/drakconnect:165
#: standalone/drakconnect:970 standalone/drakconnect:1070
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
#: ugtk2.pm:908
#, c-format
msgid "Cancel"
msgstr "বাতিল"
#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
#: standalone/drakbackup:3881 standalone/drakbug:104
#: standalone/drakconnect:161 standalone/drakconnect:246
#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1040 ugtk2.pm:1041
#, c-format
msgid "Help"
msgstr "সাহায্য"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "এই কনফিগারেশনটি পরীক্ষা করো"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "আপনি কি এই কনফিগারেশন পরীক্ষা করতে চান?"
# Warning-এর বাংলা "নোটিশ" লিখলাম
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"নোটিশ: এই গ্রাফিক্স কার্ডটি পরীক্ষা করতে গিয়ে আপনার কম্পিউটারটি অচল হয়ে যেতে পারে"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"একটি ত্রুটি সাধিত হয়েছে:\n"
"%s\n"
"কিছু মান পরিবর্তনের চেষ্টা করুন"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "%d সেকেন্ডের মধ্যে বের হয়ে যাবে"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "এটাই কি সঠিক সেটিং?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "কীবোর্ড লে-আউট: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "%s ধরণের মাউস\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "মাউস ডিভাইস: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "মনিটর: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "মনিটরের HorizSync: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "মনিটরের VertRefresh: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "গ্রাফিক্স কার্ড: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "গ্রাফিক্স মেমরী: %s\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "রঙের গভীরতা: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "রেজুলেশন: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg ড্রাইভার: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "শুরু থেকেই গ্রাফিকাল ইন্টারফস থাকবে"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"বুট হবার সাথে সাথে সয়ংক্রিয়ভাবে গ্রাফিকাল ইন্টারফেস চালু হবার জন্য আমি আপনার "
"কম্পিউটার সেট করতে পারি।\n"
"আপনি কি রিবুটের পরে Xorg চালু করতে চান?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"মনেহচ্চে আপনার গ্রাফিক কার্ডের টিভি-আউট কানেকটর আছে।\n"
"ফ্রেম বাফার ব্যবহার করে কাজ করবার জন্য কনফিগার করা যাবে।\n"
"\n"
"এটার জন্য বুট করার আগে আপনার গ্রাফিক কার্ডকে টিভির সাথে সংযুক্ত করতে হবে।\n"
"তারপরে বুটলোডারে \"TVout\" এন্ট্রি পছন্দ করতে হবে\n"
"\n"
"আপনার কি এই সুবিধাটি আছে?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "আপনি কি ধরণের টিভি ব্যবহার করছেন?"
# সাম:
#: Xconfig/xfree.pm:630
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "অনান্য"
#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
#: standalone/service_harddrake:203
#, c-format
msgid "Please wait"
msgstr "অনুগ্রহ করে অপেক্ষা করুন"
#: any.pm:143
#, c-format
msgid "Bootloader installation in progress"
msgstr "বুট লোডার ইনস্টল করা হচ্ছে"
#: any.pm:154
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO %s ড্রাইভে একটি নতুন ভলিউম আই-ডি দিতে চায়। যাই হোক, উইন্ডোজ এন-টি,\n"
"২০০০, অথবা এক্স-পি'র বুট ডিস্কের ভলিউম আই-ডি পরিবর্তনে এগুলো একটি দুর্ভাগ্যজনক "
"উইন্ডোজ সমস্যা।\n"
"নতুন একটি ভলিউম আই-ডি দেয়া হবে?"
#: any.pm:165
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Bootloader ইনষ্টলেশন ব্যর্থ হয়েছে। এ সমস্ত ত্রুটি ঘটেছে:"
#: any.pm:171
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"বুট-লোডার সক্রিয় করার আপনাকে আপনার ওপেন ফার্মওয়্যার বুট-যন্ত্র পরিবর্তন\n"
" করতে হতে পারে। যদি রিবুট করার পর কোন বুটলোডার প্রম্প্ট না দেখেন, তাহলে\n"
" রিবুটের কমান্ড অপশনে যান এবং টাইপ করুন: setenv boot-device %s,\\\\:tbxi\n"
" তারপর টাইপ করুন: shut-down\n"
"পরবর্তীতে বুট হওয়ার সময় বুটলোডার প্রম্প্ট দেখতে পাওয়া উচিত।"
#: any.pm:209
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"আপনি একটি পার্টিশনে বুটলোডার ইনস্টল করার সিন্ধান্ত নিয়েছেন।\n"
"আপনাকে জানানো যাচ্ছে যে যেই হার্ড ড্রাইভ থেকে বুট করেন সেটাতে আগে থেকেই বুটলোডার "
"আছে\n"
"(যেমন: সিস্টেম কমান্ডার)।\n"
"\n"
"আপনি কোন ড্রাইভ থেকে বুট করছেন?"
#: any.pm:232 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "ড্রাইভের প্রথম সেক্টর (MBR)"
#: any.pm:233
#, c-format
msgid "First sector of the root partition"
msgstr "রুট পার্টিশনের প্রথম সেক্টর"
#: any.pm:235
#, c-format
msgid "On Floppy"
msgstr "ফ্লপি তে"
#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "উপেক্ষা"
#: any.pm:241
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub ইনস্টলেশন"
#: any.pm:242
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "আপনি bootloader টি কোথায় ইনস্টল করতে চান?"
#: any.pm:268 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "বুটের ধরণ কনফিগারেশন"
#: any.pm:270 any.pm:302
#, c-format
msgid "Bootloader main options"
msgstr "বুটলোডারের আসল অপশনসমুহ"
#: any.pm:274
#, c-format
msgid "Give the ram size in MB"
msgstr "মেগাবাইটে র্যমের সাইজ প্রদান করুন"
#: any.pm:276
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "``নিয়ন্ত্রিত কমান্ড লাইন অপশন'' অপশনটি পাসওয়ার্ড ছাড়া ব্যবহার করা যাবে না"
#: any.pm:277 any.pm:610 authentication.pm:182
#, c-format
msgid "The passwords do not match"
msgstr "পাসওয়ার্ডটি মিলছে না"
#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
#, c-format
msgid "Please try again"
msgstr "অনুগ্রহ করে আবার চেষ্ট করুন"
#: any.pm:282 any.pm:305
#, c-format
msgid "Bootloader to use"
msgstr "ব্যবহারের জন্য বুটলোডার"
#: any.pm:284 any.pm:307
#, c-format
msgid "Boot device"
msgstr "বুট ডিভাইস"
#: any.pm:286
#, c-format
msgid "Delay before booting default image"
msgstr "স্বাভাবিক ইমেজ লোড করার আগে দেরী করো"
#: any.pm:287
#, c-format
msgid "Enable ACPI"
msgstr "ACPI এনেবল করো"
#: any.pm:289
#, c-format
msgid "Force no APIC"
msgstr "APIC-র অনুপস্থিতিতে জোর দাও"
#: any.pm:291
#, c-format
msgid "Force No Local APIC"
msgstr "স্থানীয়ভাবে APIC-র অনুপস্থিতিতে জোর দাও"
#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:688 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
#: standalone/drakbackup:3488 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "পাসওয়ার্ড"
#: any.pm:294 any.pm:638 authentication.pm:188
#, c-format
msgid "Password (again)"
msgstr "পাসওয়ার্ড (পুনরায়)"
#: any.pm:295
#, c-format
msgid "Restrict command line options"
msgstr "কমান্ডলইন অপশনে বাঁধা দাও"
#: any.pm:295
#, c-format
msgid "restrict"
msgstr "বাঁধা দাও"
#: any.pm:297
#, c-format
msgid "Clean /tmp at each boot"
msgstr "প্রতি বুটে /tmp পরিষ্কার করো"
#: any.pm:298
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "যদি প্রয়োজন হয় যথাযথ RAM লাগবে (পাওয়া গেছে %d RAM)"
#: any.pm:306
#, c-format
msgid "Init Message"
msgstr "Init বার্তা"
#: any.pm:308
#, c-format
msgid "Open Firmware Delay"
msgstr "বিলম্বিত ওপেন ফার্মওয়্যার"
#: any.pm:309
#, c-format
msgid "Kernel Boot Timeout"
msgstr "কার্নাল বুটের সময় অতিক্রান্ত হয়েছে"
#: any.pm:310
#, c-format
msgid "Enable CD Boot?"
msgstr "সিডি বুট সক্রিয় করা হবে?"
#: any.pm:311
#, c-format
msgid "Enable OF Boot?"
msgstr "OF বুট সক্রিয় করা হবে?"
#: any.pm:312
#, c-format
msgid "Default OS?"
msgstr "স্বাভাবিক অবস্থায় ব্যবহৃত OS?"
#: any.pm:365
#, c-format
msgid "Image"
msgstr "ইমেজ"
#: any.pm:366 any.pm:376
#, c-format
msgid "Root"
msgstr "Root"
#: any.pm:367 any.pm:389
#, c-format
msgid "Append"
msgstr "যুক্ত"
#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "ভিডিওর ধরণ"
#: any.pm:371
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:372
#, c-format
msgid "Network profile"
msgstr "নেটওয়ার্ক প্রোফাইল"
#: any.pm:381 any.pm:386 any.pm:388
#, c-format
msgid "Label"
msgstr "শিরোনাম"
#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "স্বাভাবিক"
#: any.pm:390
#, c-format
msgid "Initrd-size"
msgstr "Initrd-র সাইজ"
#: any.pm:392
#, c-format
msgid "NoVideo"
msgstr "কোন ভিডিও নেই"
#: any.pm:403
#, c-format
msgid "Empty label not allowed"
msgstr "খালি শিরোনাম গ্রহণযোগ্য নয়"
#: any.pm:404
#, c-format
msgid "You must specify a kernel image"
msgstr "আপনাকে অবশ্যই একটি কার্নালের ইমেজ নির্ধারণ করে দিতে হবে"
#: any.pm:404
#, c-format
msgid "You must specify a root partition"
msgstr "আপনাকে অবশ্যই একটি রুট পার্টিশন নির্ধারণ করে দিতে হবে"
#: any.pm:405
#, c-format
msgid "This label is already used"
msgstr "এই শিরোনামটি আগেই ব্যবহার হয়েছে"
#: any.pm:419
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "আপনি কি ধরণের এন্ট্রি যোগ করতে চান?"
#: any.pm:420
#, c-format
msgid "Linux"
msgstr "লিনাক্স"
#: any.pm:420
#, c-format
msgid "Other OS (SunOS...)"
msgstr "অন্যান্য OS (SunOS...)"
#: any.pm:421
#, c-format
msgid "Other OS (MacOS...)"
msgstr "অন্যান্য OS (MacOS...)"
#: any.pm:421
#, c-format
msgid "Other OS (Windows...)"
msgstr "অন্যান্য OS (Windows...)"
#: any.pm:449
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"এপর্যন্ত আপনার বুটমেনুর এন্ট্রিগুলি এখানে।\n"
"আপনি অন্যান্য এন্ট্রি তৈরী করতে পারেন অথবা আগের এন্ট্রিগুলি পরিবর্তন করতে পারেন।"
#: any.pm:596
#, c-format
msgid "access to X programs"
msgstr "X প্রোগ্রামসমূহে প্রবেশাধিকার"
#: any.pm:597
#, c-format
msgid "access to rpm tools"
msgstr "RPM টুলে প্রবেশাধিকার"
#: any.pm:598
#, c-format
msgid "allow \"su\""
msgstr "\"su\" গ্রহন করো"
#: any.pm:599
#, c-format
msgid "access to administrative files"
msgstr "এডমিনিষ্ট্রেশন সংক্রান্ত ফাইলে প্রবেশাধিকার"
#: any.pm:600
#, c-format
msgid "access to network tools"
msgstr "নেটওয়ার্ক টুলে প্রবেশাধিকার"
#: any.pm:601
#, c-format
msgid "access to compilation tools"
msgstr "compilation টুলে প্রবেশাধিকার"
#: any.pm:606
#, c-format
msgid "(already added %s)"
msgstr "(%s আগেই যোগ করা হয়েছে)"
#: any.pm:611
#, c-format
msgid "This password is too simple"
msgstr "পাসওয়ার্ডটা খুবই সাধারণ"
#: any.pm:612
#, c-format
msgid "Please give a user name"
msgstr "অনুগ্রহ করে একটি উইজার নেম দিন"
#: any.pm:613
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ইউজারনেমে অবশ্যই ছোটহাতের অক্ষর, নম্বর \"-\" এবং \"_\" থাকতে হবে"
#: any.pm:614
#, c-format
msgid "The user name is too long"
msgstr "ইউজারনেমটি অনেক বড়"
#: any.pm:615
#, c-format
msgid "This user name has already been added"
msgstr "এই ইউজারনেমটি এর আগেই যোগ করা হয়েছে"
#: any.pm:619
#, c-format
msgid "Add user"
msgstr "ইউজার যোগ করো"
#: any.pm:620
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"একটি ইউজার প্রবেশ করান\n"
"%s"
#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
#: standalone/drakbackup:2701 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "হয়েছে"
#: any.pm:624 help.pm:51
#, c-format
msgid "Accept user"
msgstr "ইউজার গ্রহন করো"
#: any.pm:635
#, c-format
msgid "Real name"
msgstr "আসল নাম"
#: any.pm:636 standalone/drakbackup:1620
#, c-format
msgid "Login name"
msgstr "লগ-ইন নাম"
#: any.pm:639
#, c-format
msgid "Shell"
msgstr "শেল"
#: any.pm:641
#, c-format
msgid "Icon"
msgstr "আইকন"
#: any.pm:688 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "সয়ংক্রিয় লগ-ইন"
#: any.pm:689
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"আমি আপনার কম্পিউটারকে সয়ংক্রিয়ভাবে একটি ইউজারকে লগইন করার জন্য সেট করতে পারি।"
#: any.pm:690 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?"
#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
#: wizards.pm:156 wizards2.pm:158
#, c-format
msgid "Yes"
msgstr "হ্যাঁ"
#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
#, c-format
msgid "No"
msgstr "না"
#: any.pm:692
#, c-format
msgid "Choose the default user:"
msgstr "স্বাভাবিক ব্যবহারকারীকে পছন্দ করুন:"
#: any.pm:693
#, c-format
msgid "Choose the window manager to run:"
msgstr "রান করার জন্য উইন্ডো ম্যানেজারকে পছন্দ করুন:"
#: any.pm:706
#, c-format
msgid "Please choose a language to use."
msgstr "ব্যবহার করার জন্য একটি ভাষা পছন্দ করুন"
#: any.pm:707
#, c-format
msgid "Language choice"
msgstr "পছন্দনীয় ভাষা"
#: any.pm:733
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux বাভিন্ন ভাষা সমর্থন করে।\n"
"আপনি যেই ভাষাটি ইনস্টল করতে চান তা পছন্দ করুন।\n"
"ইনস্টল শেষে রি-স্টার্ট করার পরে সেই ভাষাগুলি উপলব্ধ হবে।"
#: any.pm:752 any.pm:773 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "স্বাভাবিকভাবে ইউনিকোড ব্যবহার করো"
#: any.pm:753 help.pm:647
#, c-format
msgid "All languages"
msgstr "সমস্থ ভাষা"
#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
#, c-format
msgid "Country / Region"
msgstr "দেশ / স্থান"
#: any.pm:795
#, c-format
msgid "Please choose your country."
msgstr "অনুগ্রহ করে তোমার দেশ পছন্দ করো।"
#: any.pm:797
#, c-format
msgid "Here is the full list of available countries"
msgstr "উপলব্ধ সমস্থ দেশের নাম এখানে রয়েছে"
#: any.pm:798
#, c-format
msgid "Other Countries"
msgstr "অন্যান্য দেশসমুহ"
#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:394
#, c-format
msgid "Advanced"
msgstr "উন্নত"
#: any.pm:806
#, c-format
msgid "Input method:"
msgstr "ইনপুট মাধ্যম:"
#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
#: network/netconnect.pm:380 network/netconnect.pm:385
#: network/netconnect.pm:1377 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "একটিও না"
#: any.pm:921
#, c-format
msgid "No sharing"
msgstr "শেয়ারিং নেই"
#: any.pm:921
#, c-format
msgid "Allow all users"
msgstr "সব ব্যবহারকারীদের গ্রহণ করো"
#: any.pm:925
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr "আপনি কি ব্যবহারকারীদের কিছু ডিরেক্টরি শেয়ার করতে দিতে চান?\n"
#: any.pm:937
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: ঐতিহ্যগত ইউনিক্স ফাইল শেয়ারিং সিস্টেম, যা ম্যাক এবং উইন্ডোজে স্বল্প সমর্থিত।"
#: any.pm:940
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: উইন্ডোজ, ম্যাক ও-এস এক্স এবং অনেক আধুনিক লিনাক্স সিস্টেম কর্তৃক ব্যবহৃত ফাইল "
"শেয়ারিং সিস্টেম।"
#: any.pm:948
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"আপনি NFS বা SMB ব্যবহার করে ফাইল পাঠাতে পারেন। যেটি আপনি ব্যবহার করতে চান "
"অনুগ্রহ করে নির্বাচন করুন।"
#: any.pm:973
#, c-format
msgid "Launch userdrake"
msgstr "userdrake শুরু করো"
#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "বন্ধ"
#: any.pm:975
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"প্রত্যেক ব্যবহারকারী গ্রুপের \"ফাইল ভাগাভাগি\" ভাগাভাগি করতে পারেন। \n"
"এই গ্রুপে একজণ ব্যবহারকারী যোগ করতে আপনি userdrake ব্যবহার করতে পারেন।"
#: authentication.pm:24
#, c-format
msgid "Local file"
msgstr "লোকাল ফাইল"
#: authentication.pm:25
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:26
#, c-format
msgid "NIS"
msgstr "NIS"
# সাম
#: authentication.pm:27
#, c-format
msgid "Smart Card"
msgstr "স্মার্ট কার্ড"
#: authentication.pm:28 authentication.pm:153
#, c-format
msgid "Windows Domain"
msgstr "উইন্ডোজ ডোমেইন"
#: authentication.pm:29
#, c-format
msgid "Active Directory with SFU"
msgstr "SFU যুক্ত সক্রিয় ডিরেক্টরি"
#: authentication.pm:30
#, c-format
msgid "Active Directory with Winbind"
msgstr "WinBind যুক্ত সক্রিয় ডিরেক্টরি"
#: authentication.pm:56
#, c-format
msgid "Local file:"
msgstr "লোকাল ফাইল:"
#: authentication.pm:56
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"লোকাল ফাইলে থাকা ব্যবহারকারীর সকল বিশ্বাসযোগ্যতা ও তথ্যের জন্য লোকাল ব্যবহার করুন"
#: authentication.pm:57
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:57
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"কিছু অথবা সব নির্ভরযোগ্যতার আপনার কম্পিউটারকে LDAP ব্যবহার করতে বলুন। LDAP আপনার "
"অর্গানাইজেশনের বিভিন্ন ধরনের তথ্যকে আরও সুদৃড় করে"
#: authentication.pm:58
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:58
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"সার্বজনীন পাসওয়ার্ড ও গ্রুপ ফাইলসহ আপনি কম্পিউটারের একটি গ্রুপকে একই নেটওয়ার্ক তথ্য "
"সার্ভিস ডোমেইনে চলার অনুমতি দেবে।"
#: authentication.pm:59
#, c-format
msgid "Windows Domain:"
msgstr "উইন্ডোজ ডোমেইন:"
#: authentication.pm:59
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"উইনবাইন্ড আপনার সিস্টেমকে একটি উইন্ডোজ ডোমেইনের তথ্য ও নির্ভরযোগ্য ব্যবহারকারীদের "
"পুনরুদ্ধারের অনুমতি দেবে।"
#: authentication.pm:60
#, c-format
msgid "Active Directory with SFU:"
msgstr "SFU যুক্ত সচল ডিরেক্টরি:"
#: authentication.pm:60 authentication.pm:61
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr "নেটওয়ার্কের নির্ভরযোগ্য সার্ভিস প্রদানের জন্য Kerberos একটি নিরাপদ সিস্টেম।"
#: authentication.pm:61
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Winbind যুক্ত সচল ডিরেক্টরি:"
#: authentication.pm:86
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP অনুমোদন"
#: authentication.pm:87
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP বেইজ dn"
#: authentication.pm:88 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "LDAP সার্ভার"
#: authentication.pm:101 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "সাধারণ"
#: authentication.pm:102
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:103
#, c-format
msgid "SSL"
msgstr "এসএসএল"
#: authentication.pm:104
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "নিরাপত্তা লে-আউট (SASL/Kerberos)"
#: authentication.pm:111 authentication.pm:149
#, c-format
msgid "Authentication Active Directory"
msgstr "নির্ভরযোগ্য সচল ডিরেক্টরি"
#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "ডোমেইন"
#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:81
#: standalone/drakTermServ:270
#, c-format
msgid "Server"
msgstr "সার্ভার"
#: authentication.pm:115
#, c-format
msgid "LDAP users database"
msgstr "LDAP ব্যবহারকারীদের ডাটাবেজ"
#: authentication.pm:116
#, c-format
msgid "Use Anonymous BIND "
msgstr "Anonymous বাইন্ড ব্যবহার করুন "
#: authentication.pm:117
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "LDAP ব্যবহারকারী সচল ডিরেক্টরি ব্রাউজ করার অনুমতি দিয়েছে"
#: authentication.pm:118
#, c-format
msgid "Password for user"
msgstr "ব্যবহারকারীর পাসওয়ার্ড"
#: authentication.pm:119
#, c-format
msgid "Encryption"
msgstr "এনক্রিপশন"
#: authentication.pm:130
#, c-format
msgid "Authentication NIS"
msgstr "NIS অনুমোদন"
#: authentication.pm:131
#, c-format
msgid "NIS Domain"
msgstr "NIS ডোমেইন"
#: authentication.pm:132
#, c-format
msgid "NIS Server"
msgstr "NIS সার্ভার"
#: authentication.pm:137
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"এটার জন্য W2K PDC কাজ করতে, আপনার সম্ভবত admin চালু করার প্রয়োজন হবে: C:\\>net "
"localgroup \"Pre-Windows 2000 Compatible Access\" সবাইকে /যুক্ত করতে এবং "
"সার্ভার রিবুট করতে হবে।\n"
"উইন্ডোজ(TM) ডোমেইনে যুক্ত হওয়ার জন্য আপনাকে ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম/"
"পাসওয়ার্ডও দিতে হবে।\n"
"যদি নেটওয়ার্কিং এরই মধ্যে চালু না হয়ে থাকে, তাহলে নেটওয়ার্ক সেটআপ করার পর Drakx "
"ডোমেইনে যুক্ত হতেচেষ্টা করবে।\n"
"যদি কোন কারণে এইসেটআপ ব্যর্থ হয় এবং ডোমেইন অনুমোদন কাজ না করে, তাহলে আপনার "
"উইন্ডোজ(TM) ডোমেইনব্যবহার করতে 'smbpasswd -j DOMAIN -U USER%%PASSWORD' চালান, "
"এবং সিস্টেম বুট হবার পরঅ্যাডমিন ব্যবহারকারীনাম/পাসওয়ার্ড দিন।\n"
"'wbinfo -t' কমান্ডটি আপনার অনুমোদিত গোপনীয়তা ভাল কিনা পরীক্ষা করে দেখবে।"
#: authentication.pm:149
#, c-format
msgid "Authentication Windows Domain"
msgstr "অনুমোদিত উইন্ডোজ ডোমেইন"
#: authentication.pm:154
#, c-format
msgid "Domain Admin User Name"
msgstr "ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম"
#: authentication.pm:155
#, c-format
msgid "Domain Admin Password"
msgstr "ডোমেইন অ্যাডমিনের পাসওয়ার্ড"
#: authentication.pm:156
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr "UID/SID জমা করার জন্য Idmap ব্যবহার করুন "
#: authentication.pm:157
#, c-format
msgid "Default Idmap "
msgstr "ডিফল্ট Idmap"
# sam: authentication
#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড এবং নেটওয়ার্ক পরিচয় প্রমাণ প্রক্রিয়ার নীতিমালা "
"সেট করুন"
#: authentication.pm:172
#, c-format
msgid "Set administrator (root) password"
msgstr "আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড সেট করুন"
#: authentication.pm:173 standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "নির্ভরযোগ্য নিয়ম"
# -PO: keep this short or else the buttons will not fit in the window
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:178 help.pm:722
#, c-format
msgid "No password"
msgstr "পাসওয়ার্ড ছাড়া"
#: authentication.pm:184
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "এই পাসওয়ার্ডটি খুবই ছোট (এটা অবশ্যই %d অক্ষরের হতে হবে)"
#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
#, c-format
msgid "Authentication"
msgstr "অনুমোদন"
#: authentication.pm:302
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "কোন NIS ডোমেইন ছাড়া ব্রডকাষ্ট ব্যবহার করা যাবেনা"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:751
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
#: bootloader.pm:851
#, c-format
msgid "LILO with graphical menu"
msgstr "গ্রাফিকাল মেনুর সাথে LILO"
#: bootloader.pm:852
#, c-format
msgid "LILO with text menu"
msgstr "টেক্সট মেনুর সাথে LILO"
#: bootloader.pm:853
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:854
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:929
#, c-format
msgid "not enough room in /boot"
msgstr "/boot -এ বেশী জায়গা নেই"
#: bootloader.pm:1389
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "আপনি %s পার্টিশনে বুটলোডার ইনস্টল করতে পারবেননা\n"
# renumber = রি-নাম্বার লিখলাম। আসলটা আমি জানিনা
#: bootloader.pm:1423
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"পার্টিশন রি-নাম্বার করার কারনে আপনার বুটলোডারের কনফিগারেশন অবশ্যই আপডেট করতে হবে"
#: bootloader.pm:1436
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"বুটলোডার সঠিকভাবে ইনস্টল হতে পারবেনা। আপনাকে rescue বুট করতে হবে এবং \"%s\" "
"পছন্দ করতে হবে"
#: bootloader.pm:1437
#, c-format
msgid "Re-install Boot Loader"
msgstr "বুট লোডার রি-ইনস্টল করো"
#: common.pm:139
#, c-format
msgid "KB"
msgstr "কেবি"
#: common.pm:139
#, c-format
msgid "MB"
msgstr "এমবি"
#: common.pm:139
#, c-format
msgid "GB"
msgstr "জিবি"
#: common.pm:147
#, c-format
msgid "TB"
msgstr "টিবি"
#: common.pm:155
#, c-format
msgid "%d minutes"
msgstr "%d মিনিট"
#: common.pm:157
#, c-format
msgid "1 minute"
msgstr "১ মিনিট"
#: common.pm:159
#, c-format
msgid "%d seconds"
msgstr "%d সেকেন্ড"
#: common.pm:261
#, c-format
msgid "kdesu missing"
msgstr "kdesu পাওয়া যাচ্ছে না"
#: common.pm:264
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper পাওয়া যাচ্ছে না"
#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "অষ্ট্রিয়া"
#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "অষ্ট্রেলিয়া"
#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:51
#, c-format
msgid "Belgium"
msgstr "বেলজিয়াম"
#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "ব্রাজিল"
#: crypto.pm:18 crypto.pm:52 lang.pm:230
#, c-format
msgid "Canada"
msgstr "কানাডা"
#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
#, c-format
msgid "Switzerland"
msgstr "সুইজারল্যান্ড"
#: crypto.pm:20 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "কোষ্টা রিকা"
#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "চেক রিপাবলিক"
#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "জার্মানী"
#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "ডেনমার্ক"
#: crypto.pm:24 crypto.pm:55 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "এস্তোনিয়া"
#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
#, c-format
msgid "Spain"
msgstr "স্পেন"
#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "ফিনল্যান্ড"
#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:48
#, c-format
msgid "France"
msgstr "ফ্রান্স"
#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "গ্রীস"
#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "হাঙ্গেরী"
#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "আয়ারল্যান্ড"
#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "ইসরাঈল"
#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "ইতালী"
#: crypto.pm:33 crypto.pm:64 lang.pm:303
#, c-format
msgid "Japan"
msgstr "জাপান"
#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:49
#, c-format
msgid "Netherlands"
msgstr "নেদারল্যান্ড"
#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "নরওয়ে"
#: crypto.pm:36 crypto.pm:66 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "নিউজিল্যান্ড"
#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "পোল্যান্ড"
#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "পর্তুগাল"
#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "রাশিয়া"
#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
#, c-format
msgid "Sweden"
msgstr "সুইডেন"
#: crypto.pm:41 crypto.pm:71 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "স্লোভাকিয়া"
#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
#, c-format
msgid "Thailand"
msgstr "থাইল্যান্ড"
#: crypto.pm:43 crypto.pm:76 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "তাইওয়ান"
#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "দক্ষিন আফ্রিকা"
#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
#, c-format
msgid "United States"
msgstr "যুক্তরাষ্ট্র"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV একটি প্রোটোকল যা আপনাকে স্থানীয়ভাবে একটি ওয়েব সার্ভারের ডিরেক্টরি মাউন্ট "
"করার অনুমতি\n"
"দেয়, এবং এটাকে একটি স্থানীয় ফাইলসিস্টেম হিসেবে মনে করুন(সরবরাহকৃত ওয়েব সার্ভারটি "
"WebDAV সার্ভার\n"
"হিসেবে কন্ফিগার করা)। যদি আপনি WebDAV মাউন্ট পয়েন্ত যুক্ত করতে চান, তবে \"নতুন\" "
"বেছে নিন।"
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "নতুন"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "আন-মাউন্ট"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "মাউন্ট"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "মাউন্ট পয়েন্ট"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "অনুগ্রহ করে WebDAV সার্ভারের URL প্রবেশ করান"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL অবশ্যই http:// অথবা https:// দিয়ে শুরু করতে হবে"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "সার্ভার:"
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
#, c-format
msgid "Mount point: "
msgstr "মাউন্ট পয়েন্ট:"
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
#, c-format
msgid "Options: %s"
msgstr "অপশন: %s"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "অনুগ্রহ করে প্রথমে আপনার ডাটার একটি ব্যাকআপ করে নিন"
#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"আপনি যদি aboot ব্যবহার করার পরিকল্পনা করে থাকেন, তাহলে ডিষ্কের শুরুতে সাবধানতার "
"সাথে খালি\n"
"জায়গা ছেড়ে দিন (২০৪৮ সেক্টরই যথেষ্ট)"
#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "সাহায্যকারী"
#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "কার্য পছন্দ করুন"
#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"আপনার একটি বড় মাইক্রসফ্ট উইন্ডোজ পার্টিশন আছে।\n"
"সেটাকে আগে রি-সাইজ করার জন্য আমি পরামর্শ দিচ্ছি\n"
"(সেটাকে আগে ক্লিক করুন এবং পরে \"Resize\"-এ ক্লিক করুন)"
#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "অনুগ্রহ করে একটি পার্টিশনে ক্লিক করুন"
#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
#: standalone/drakbackup:2936 standalone/drakbackup:2996
#, c-format
msgid "Details"
msgstr "বিস্তারিত"
#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "কোন হার্ড ড্রাইভ পাওয়া যায়নি"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Journalised FS"
msgstr "FS জার্নালাইজ করা হয়েছে"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "সোয়াপ"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "উইন্ডোজ"
#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
#, c-format
msgid "Empty"
msgstr "শূণ্য"
#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "ফাইল সিস্টেমের ধরণ:"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "পরিবর্তে ``%s'' ব্যবহার করুন"
#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
#, c-format
msgid "Create"
msgstr "তৈরী করো"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:107 standalone/harddrake2:116
#, c-format
msgid "Type"
msgstr "ধরণ"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
#: standalone/drakperm:124 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "মুছে ফেলো"
#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "প্রথমে ``Unmount'' ব্যবহার করুন"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "অন্য একটি পার্টিশন পছন্দ করুন"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "একটি পার্টিশন পছন্দ করুন"
#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "বাহির"
#: diskdrake/interactive.pm:253 help.pm:530
#, c-format
msgid "Undo"
msgstr "পূর্বাবস্থা"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "সাধারণ মোডে বদল করো"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "দক্ষ মোডে বদল করো"
#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "অগ্রসর হবে?"
# সাম
#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"পার্টিশন %s ফরম্যাট করা প্রয়োজন।\n"
"অন্যথা fstab এ মাউন্ট পয়েন্ট %s এর কোন এন্ট্রি লেখা হবে না।\n"
"তবুও বের হয়ে যাব কি?"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "সংরক্ষণ ছাড়াই বের হও"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "কোন পার্টিশন টেবিল না লিখেই বের হয়ে যাব?"
#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "আপনি /etc/fstab -এর পরিবর্তন সেভ করতে চান?"
#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "পার্টিশন টেবিলের পরিবর্তনগুলি কার্যকর করবার জন্য আপনাকে রা-ষ্টার্ট করতে হবে"
#: diskdrake/interactive.pm:307 help.pm:530
#, c-format
msgid "Clear all"
msgstr "সব বন্ধ করো"
#: diskdrake/interactive.pm:308 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "সয়ংক্রিয়ভাবে সাজানো"
#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "আরও"
#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "হার্ড ড্রাইভের তথ্য"
#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "সমস্থ প্রাইমারী পার্টিশনসমূহ ব্যবহৃত হচ্ছে"
#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "আমি আর পার্টিশন যোগ করতে পারবনা"
#: diskdrake/interactive.pm:348
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"আরও পার্টিশন পাওয়ার জন্য, অনুগ্রহ করে একটি মুছে ফেলুন যাতে করে এক্সটেনডেড পার্টিশন "
"তৈরী করা যায়"
#: diskdrake/interactive.pm:357
#, c-format
msgid "No supermount"
msgstr ""
#: diskdrake/interactive.pm:358
#, c-format
msgid "Supermount"
msgstr ""
#: diskdrake/interactive.pm:359
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""
#: diskdrake/interactive.pm:365 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "পার্টিশন টেবিল সংরক্ষিত করো"
#: diskdrake/interactive.pm:366 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "পার্টিশন টেবিল রিষ্টোর করো"
# ;)
#: diskdrake/interactive.pm:367 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "পার্টিশন টেবিলকে বাঁচাও"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "পার্টিশন টেবিলকে পুনরায় লোড করো"
#: diskdrake/interactive.pm:371
#, c-format
msgid "Removable media automounting"
msgstr "রিমুভেবল মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"
#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
#, c-format
msgid "Select file"
msgstr "ফাইল সিলেক্ট করো"
#: diskdrake/interactive.pm:396
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"ব্যাকআপ পার্টিশন সমান সাইজের ছিলনা\n"
"এখনো এগুবো?"
#: diskdrake/interactive.pm:425
#, c-format
msgid "Trying to rescue partition table"
msgstr "পার্টিশন টেবিল বাঁচানো হচ্ছে"
#: diskdrake/interactive.pm:431
#, c-format
msgid "Detailed information"
msgstr "বিস্তারিত তথ্য"
#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
#, c-format
msgid "Resize"
msgstr "আকার পরিবর্তন"
#: diskdrake/interactive.pm:447
#, c-format
msgid "Format"
msgstr "ফরম্যাট"
#: diskdrake/interactive.pm:449
#, c-format
msgid "Add to RAID"
msgstr "RAID-তে যোগ করো"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Add to LVM"
msgstr "LVM-এ যোগ করো"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Remove from RAID"
msgstr "RAID থেকে মুছে ফেলো"
#: diskdrake/interactive.pm:454
#, c-format
msgid "Remove from LVM"
msgstr "LVM থেকে মুছে ফেলো"
#: diskdrake/interactive.pm:455
#, c-format
msgid "Modify RAID"
msgstr "RAID পরিবর্তন করো"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Use for loopback"
msgstr "loopback-এর জন্য ব্যবহার করো"
#: diskdrake/interactive.pm:512
#, c-format
msgid "Create a new partition"
msgstr "একটি নতুন পার্টিশন তৈরী করো"
#: diskdrake/interactive.pm:515
#, c-format
msgid "Start sector: "
msgstr "শুরুর সেক্টর:"
#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
#, c-format
msgid "Size in MB: "
msgstr "মেগাবাইটে সাইজ:"
#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
#, c-format
msgid "Filesystem type: "
msgstr "ফাইলসিস্টেমের ধরণ:"
#: diskdrake/interactive.pm:523
#, c-format
msgid "Preference: "
msgstr "পছন্দ"
#: diskdrake/interactive.pm:526
#, c-format
msgid "Logical volume name "
msgstr "লজিকাল ভলিউমের নাম"
#: diskdrake/interactive.pm:556
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"আপনি কোন নতুন পার্টিশন তৈরী করতে পারবেন না\n"
"(যেহেতু আপনি সর্বোচ্চ প্রাইমারী পার্টিশনের সীমায় পৌছে গিয়েছেন)।\n"
"প্রথমে আপনাকে একটি প্রাইমারী পার্টিশন অপসরন করতে হবে এবং তারপরে এক্সটেনডেড "
"পার্টিশন তৈরী করতে হবে।"
#: diskdrake/interactive.pm:586
#, c-format
msgid "Remove the loopback file?"
msgstr "লুকআপ ফাইল রিমুভ করবো?"
#: diskdrake/interactive.pm:605
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "%s পার্টিশনের ধরণ পরিবর্তনের পরে সেটার সমস্থ ডাটা হারিয়ে যাবে"
#: diskdrake/interactive.pm:617
#, c-format
msgid "Change partition type"
msgstr "পার্টিশনের ধরণ পরিবর্তন করো"
#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "আপনি কোন ফাইলসিস্টেম চান?"
#: diskdrake/interactive.pm:626
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "ext2 থেকে ext3-তে পরিবর্তিত হচ্ছে"
#: diskdrake/interactive.pm:655
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "আপনি %s লুপব্যাক ফাইলকে কোথায় মাউন্ট করতে চান ?"
#: diskdrake/interactive.pm:656
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "আপনি %s ডিভাইসকে কোথায় মাউন্ট করতে চান?"
#: diskdrake/interactive.pm:661
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"এই পার্টিশনটি লুপব্যাকের জন্য ব্যবহৃত হওয়ার কারনে মাউন্টপয়েন্ট আনসেট করা যাবেনা।\n"
" আগে লুপব্যাক রিমুভ করুন"
#: diskdrake/interactive.pm:686
#, c-format
msgid "Where do you want to mount %s?"
msgstr "আপনি কোথায় মাউন্ট করতে চান %s?"
#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "আকার পরিবর্তন করা হচ্ছে"
#: diskdrake/interactive.pm:710
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "FAT ফাইল সিস্টেমের সীমা (Bound) হিসেব করা হচ্ছে"
#: diskdrake/interactive.pm:750
#, c-format
msgid "This partition is not resizeable"
msgstr "এই পার্টিশনটি রি-সাইজ করার মত না"
#: diskdrake/interactive.pm:755
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "এই পার্টিশনের সমস্থ ডাটা ব্যাকআপ করা উচিত্"
#: diskdrake/interactive.pm:757
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "%s পার্টিশন রি-সাইজ করার পরে, এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"
#: diskdrake/interactive.pm:762
#, c-format
msgid "Choose the new size"
msgstr "নতুন সাইজটি পছন্দ করুন"
#: diskdrake/interactive.pm:763
#, c-format
msgid "New size in MB: "
msgstr "মেগাবাইটে নতুন সাইজ:"
#: diskdrake/interactive.pm:806 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"পার্টিশনের পুনরাকৃতির পর ডাটার সম্পূর্ণতা নিশ্চিত করার জন্য, \n"
"উইন্ডোজে(TM) আপনার পরবর্তী বুটে ফাইলসিস্টেম পরীক্ষা চলবে"
#: diskdrake/interactive.pm:844
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "যোগ করার জন্য উপস্থিত একটি RAID পছন্দ করুন"
#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
#, c-format
msgid "new"
msgstr "নতুন"
#: diskdrake/interactive.pm:861
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "যোগ করার জন্য উপস্থিত একটি LVM পছন্দ করুন"
#: diskdrake/interactive.pm:867
#, c-format
msgid "LVM name?"
msgstr "LVM-এর নাম?"
#: diskdrake/interactive.pm:904
#, c-format
msgid "This partition can not be used for loopback"
msgstr "লুপব্যাকের জন্য এই পার্টিশনটি ব্যবহার করা যাবেনা"
#: diskdrake/interactive.pm:917
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:918
#, c-format
msgid "Loopback file name: "
msgstr "Loopback ফাইলের নাম: "
#: diskdrake/interactive.pm:923
#, c-format
msgid "Give a file name"
msgstr "একটি ফাইলের নাম দিন"
#: diskdrake/interactive.pm:926
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "ফাইলটি আগে থেকেই অন্য একটি লুপব্যাকে ব্যবহৃত হচ্ছে, আরেকটি পছন্দ করুন"
#: diskdrake/interactive.pm:927
#, c-format
msgid "File already exists. Use it?"
msgstr "ফাইল আগে থেকেই আছে, ব্যবহার করব?"
#: diskdrake/interactive.pm:950
#, c-format
msgid "Mount options"
msgstr "মাউন্ট অপসন"
#: diskdrake/interactive.pm:957
#, c-format
msgid "Various"
msgstr "বিভিন্ন"
#: diskdrake/interactive.pm:1021
#, c-format
msgid "device"
msgstr "ডিভাইস"
#: diskdrake/interactive.pm:1022
#, c-format
msgid "level"
msgstr "লেভেল"
#: diskdrake/interactive.pm:1023
#, c-format
msgid "chunk size in KiB"
msgstr "কিলোবাইট এ chunk সাইজ"
#: diskdrake/interactive.pm:1040
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "খুবই সাবধান: এই কাজটি ঝুঁকিপূর্ন।"
#: diskdrake/interactive.pm:1055
#, c-format
msgid "What type of partitioning?"
msgstr "কি ধরণের পার্টিশন হবে?"
#: diskdrake/interactive.pm:1093
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "পরিবর্তনগুলি অবস্থান নেবার জন্য আপনাকে রি-ষ্টার্ট করতে হবে"
#: diskdrake/interactive.pm:1102
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "%s ড্রাইভের পার্টিশন টেবিল ডিস্কে লিখতে যাচ্ছি!"
#: diskdrake/interactive.pm:1115
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "পার্টিশন %s -কে ফরমেট করার পরে এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"
#: diskdrake/interactive.pm:1131
#, c-format
msgid "Move files to the new partition"
msgstr "ফাইলগুলিক একটি নতুন পার্টিশনে সরিয়ে ফেলো"
#: diskdrake/interactive.pm:1131
#, c-format
msgid "Hide files"
msgstr "ফাইল লুকানো হোক"
#: diskdrake/interactive.pm:1132
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"%s ডিরেক্টরীতে আগে থেকেই ডাটা আছে\n"
"(%s)"
#: diskdrake/interactive.pm:1143
#, c-format
msgid "Moving files to the new partition"
msgstr "ফাইলগুলিকে একটু নতুন পার্টিশনে নিয়ে যাওয়া হচ্ছে"
#: diskdrake/interactive.pm:1147
#, c-format
msgid "Copying %s"
msgstr "%s কপি করা হচ্ছে"
#: diskdrake/interactive.pm:1151
#, c-format
msgid "Removing %s"
msgstr "%s মুছে ফেলা হচ্ছে"
#: diskdrake/interactive.pm:1165
#, c-format
msgid "partition %s is now known as %s"
msgstr "পার্টিশন %s-কে এখন %s নামে জানা যাবে"
# সাম: renumber = পুনর্বিন্যাস?
#: diskdrake/interactive.pm:1166
#, c-format
msgid "Partitions have been renumbered: "
msgstr "পার্টিশনগুলো পুনঃসংখ্যান করা হয়েছে: "
#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
#, c-format
msgid "Device: "
msgstr "ডিভাইস:"
#: diskdrake/interactive.pm:1187
#, c-format
msgid "Devfs name: "
msgstr "Devfs নাম:"
#: diskdrake/interactive.pm:1188
#, c-format
msgid "Volume label: "
msgstr "ভলিউম লেবেল:"
#: diskdrake/interactive.pm:1189
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS ড্রাইভ লেটার: %s (শুধুমাত্র একটি অনুমান)\n"
#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
#: diskdrake/interactive.pm:1263
#, c-format
msgid "Type: "
msgstr "ধরণ:"
#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
#, c-format
msgid "Name: "
msgstr "নাম:"
#: diskdrake/interactive.pm:1204
#, c-format
msgid "Start: sector %s\n"
msgstr "শুরু: সেক্টর %s\n"
#: diskdrake/interactive.pm:1205
#, c-format
msgid "Size: %s"
msgstr "সাইজ: %s"
#: diskdrake/interactive.pm:1207
#, c-format
msgid ", %s sectors"
msgstr ", %s সেক্টরসমূহ"
#: diskdrake/interactive.pm:1209
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "সিলিন্ডার %d থেকে %d পর্যন্ত\n"
#: diskdrake/interactive.pm:1210
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1211
#, c-format
msgid "Formatted\n"
msgstr "ফরমেট করা হয়েছে\n"
#: diskdrake/interactive.pm:1212
#, c-format
msgid "Not formatted\n"
msgstr "ফরমেট করা হয়নি\n"
#: diskdrake/interactive.pm:1213
#, c-format
msgid "Mounted\n"
msgstr "মাউন্ট করা হয়েছে\n"
#: diskdrake/interactive.pm:1214
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1216
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"লুপব্যাক ফাইল(গুলি):\n"
" %s\n"
#: diskdrake/interactive.pm:1217
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"পার্টিশন সাধারণভাবে বুট হয়েছে\n"
" (MS-DOS বুটের জনে, lilo-র জন্য নয়)\n"
#: diskdrake/interactive.pm:1219
#, c-format
msgid "Level %s\n"
msgstr "লেভেল %s\n"
#: diskdrake/interactive.pm:1220
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "চাঙ্ক সাইজ %d কিলোবাইট\n"
#: diskdrake/interactive.pm:1221
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-ডিস্কসমূহ %s\n"
#: diskdrake/interactive.pm:1223
#, c-format
msgid "Loopback file name: %s"
msgstr "লুপব্যাক ফাইলের নাম: %s"
#: diskdrake/interactive.pm:1226
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"কারণগুলো হতে পারে, এটি একটি\n"
"ড্রাইভার পার্টিশন। আপনার উচিত হবে\n"
"এটাকে এটা ছেড়ে দেয়া।\n"
#: diskdrake/interactive.pm:1229
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"এই বিশেষ বুটস্ট্র্যাপ\n"
"পার্টিশন হচ্ছে আপনার\n"
"সিস্টেমের ডুয়াল-বুটিং এর জন্য।\n"
#: diskdrake/interactive.pm:1246
#, c-format
msgid "Read-only"
msgstr "শুধুমাত্র পড়া যাবে"
#: diskdrake/interactive.pm:1247
#, c-format
msgid "Size: %s\n"
msgstr "সাইজ: %s\n"
#: diskdrake/interactive.pm:1248
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "জ্যামিতি: %s-গুলি সিলিন্ডার, %s-গুলি হেড, %s-গুলি সেক্টর\n"
#: diskdrake/interactive.pm:1249
#, c-format
msgid "Info: "
msgstr "তথ্য:"
#: diskdrake/interactive.pm:1250
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-ডিস্কসমূহ %s\n"
#: diskdrake/interactive.pm:1251
#, c-format
msgid "Partition table type: %s\n"
msgstr "পার্টিশন টেবিলের ধরণ: %s\n"
#: diskdrake/interactive.pm:1252
#, c-format
msgid "on channel %d id %d\n"
msgstr "%d চ্যানেলে %d আইডিতে\n"
#: diskdrake/interactive.pm:1287
#, c-format
msgid "Filesystem encryption key"
msgstr "ফাইল সিস্টেমের এনক্রিপশন কী"
#: diskdrake/interactive.pm:1288
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "আপনার ফাইল সিস্টেমের এনক্রিপশন কী পছন্দ করুন"
#: diskdrake/interactive.pm:1291
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "এই এনক্রিপশন কী টি খুবই সাধারণ (অবশ্যই %d অক্ষর বড় হতে হবে)"
#: diskdrake/interactive.pm:1292
#, c-format
msgid "The encryption keys do not match"
msgstr "এনক্রিপশন কীগুলি মিলছেনা"
#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
#: standalone/drakconnect:430
#, c-format
msgid "Encryption key"
msgstr "এনক্রিপশন কী"
#: diskdrake/interactive.pm:1296
#, c-format
msgid "Encryption key (again)"
msgstr "এনক্রিপশন কী (পুনরায়)"
#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
#: standalone/drakvpn:1116
#, c-format
msgid "Encryption algorithm"
msgstr "Encryption অ্যালগোরিদম"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "ধরণ বদল করো"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "ইউজারনেম %s ব্যবহার করে লগইন করা গেলোনা (নষ্ট পাসওয়ার্ড?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "ডোমেইন অনুমোদন প্রয়োজন"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "কোন্ ব্যবহারকারীনাম"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "অন্য একটি"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"হোস্টকে ব্যবহার করার জন্য আপনার ব্যবহারকারীনাম, পাসওয়ার্ড এবং ডোমেইনের নাম প্রবেশ "
"করান।"
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
#, c-format
msgid "Username"
msgstr "ব্যবহারকারীনাম"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "সার্ভার খোজো"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "নতুন সার্ভারের খোজ করো"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "%s প্যাকেজগুলি ইনস্টল করা প্রয়োজন। আপনি কি ইনস্টল করতে চান?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "%s আবশ্যিক প্যাকেজ নেই"
#: do_pkgs.pm:182
#, c-format
msgid "Installing packages..."
msgstr "প্যাকেজসমূহ ইনস্টল করা হচ্ছে..."
#: do_pkgs.pm:227
#, c-format
msgid "Removing packages..."
msgstr "প্যাকেজসমূহ অপসরণ করা হচ্ছে..."
#: fs.pm:487 fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "%s পার্টিশন মাউন্ট করা হচ্ছে"
# এখানে কি করতে হবে? দুটোই %s কিন্তু মানেটা হবে : %s ডিরেক্টরিতে %s পার্টিশন মাউন্ট করা সম্ভব হলোনা।
# দেখবেন কি করা যাবে...
#: fs.pm:488 fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "%2$s ডিরেক্টরিতে %1$s পার্টিশন মাউন্ট করা ব্যর্থ হয়েছে"
#: fs.pm:508 fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "%s পরীক্ষা করা হচ্ছে"
#: fs.pm:553 partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s আনমাউন্টে সমস্যা: %s"
# এনেবল লিখলাম। মানেটা মাথায় আসছেনা
#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "%s সোয়াপ পার্টিশন সক্রিয় করো"
#: fs/format.pm:44 fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "%s পার্টিশন ফরম্যাট করা হচ্ছে"
#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "%s ফাইল তৈরী এবং ফরম্যাট করা হচ্ছে"
#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "আমার জানা নেই পার্টিশন %s-কে কিভাবে %s ধরণে ফরম্যাট করতে হয়"
# এটাও উল্টে যাবে মানে করতে গেলে। কারন মানেটা দাঁড়াবে <দ্বিতীয় %s কে প্রথম %s ফরম্যাট করা ব্যার্থ হয়েছে>
#: fs/format.pm:88 fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s কে %s ফরম্যাট করতে ব্যর্থ হয়েছে"
# #msgstr "%2$s কে %1$s ফরম্যাট করা ব্যর্থ হয়েছে"
#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"এই ফাইল সিস্টেমে inode প্রবেশ সময় আপডেট করবেন না\n"
"(যেমন,নিউজ সার্ভার দ্রুত করতে নিউজ স্পুলে দ্রুত প্রবেশ)।"
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"শুধুমাত্র স্পষ্টভাবে মাউন্ট করতে পারে (যেমন,\n"
")(-a অপশন ফাইল সিস্টেম মাউন্ট করতে দেবে না)।"
#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "কোন চিহ্ন বা বিশেষ ব্লক যন্ত্রকে ফাইল সিস্টেমে ব্যাখ্যা করবেন না।"
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"মাউন্টকৃত ফাইল সিস্টেমে কোন বাইনারি এক্সিকিউট করার অনুমতি দেবেন না।\n"
"এই অপশন সেই সার্ভারের জন্য ব্যবহৃত হতে পারে যেখানে সে তার নিজের চেয়ে\n"
"অন্যান্য আর্কিটেকচারের বাইনারিগুলো বেশি ধারণ করে।"
#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"allow set-user-identifier বা set-group-identifier বিটগুলোকে কোন প্রভাব নেয়ার\n"
"অনুমতি দেবেন না। (এটা যদিও নিরাপদ দেখাচ্ছে, কিন্তু অনিরাপদ হতে পারে যদি আপনার "
"suidperl(1))\n"
"ইনস্টল করা থাকে।)"
#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "ফাইল সিস্টেমকে শুধু পড়ার জন্য মাউন্ট করো।"
#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "সকল I/O ফাইল সিস্টেম যুগপত্ভাবে হওয়া উচিত।"
#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"একজন সাধারণ ব্যবহারকারীকে ফাইল সিস্টেম মাউন্ট করার অনুমতি দিন। মাউন্টিং\n"
"ব্যবহারকারীর নাম mtab এ লেখা থাকে সেকারণে সে পুনরায় \n"
"ফাইল সিস্টেমকে আনমাউন্ট করতে পারে।\n"
"এই অপশন পরোক্ষভাবে noexec, nosuid, এবং nodev অপশনকে প্রকাশ করে।"
#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "সাধারণ ব্যবহারকারীদের লেখার ক্ষমতা দিন"
#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "সাধারণ ব্যবহারকারীদের শুধু পড়ার ক্ষমতা দিন"
#: fs/type.pm:372
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "১৬ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি JFS ব্যবহার করতে পারবেন না"
#: fs/type.pm:373
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "৩২ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি ReiserFS ব্যবহার করতে পারবেন না"
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "/usr -এর সাথে"
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "সার্ভার"
#: fsedit.pm:183
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"আমি %s যন্ত্রের পার্টিশন টেবিল পড়তে পাচ্ছি না, এটা আমার জন্য খুবই কলুষিত :(\n"
"আমি এর উপর দিয়ে কাজ করতে, নষ্ট পার্টশন মুছে ফেলতে চেষ্টা করব(সব ডাটা হারিয়ে "
"যাবে!)।\n"
"অন্য সমাধান হচ্ছে Drakx কে পার্টিশন টেবিল পরিবর্তন করার অনুমতি না দেয়া।\n"
"(ভুল হচ্ছে %s)\n"
"\n"
"আপনি কি সব পার্টিশন হারাতে রাজি?\n"
#: fsedit.pm:400
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "মাউন্ট পয়েন্টগুলি অবশ্যই / দিয়ে শুরু হতে হবে"
# * = alphanumerical = বাংলাটা মনে পড়ছেনা
#: fsedit.pm:401
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "মাউন্ট পয়েন্টগুলিতে শুধু * অক্ষর থাকবে"
#: fsedit.pm:402
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "এই পার্টিশনটি আগে থেকেই %s মাউন্টপয়েন্ট নামে আছে\n"
#: fsedit.pm:404
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"আপনি একটি সফ্টওয়্যার RAID পার্টিশনকে রুট (/) হিসেবে নির্বাচন করেছেন।\n"
"/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n"
"অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন"
#: fsedit.pm:407
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "আপনি LVM লজিকাল ভলিউমকে %s মাউন্ট পয়েন্ট হিসেবে ব্যবহার করতে পারবেননা"
#: fsedit.pm:409
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"আপনি একটি সফ্টওয়্যার LVM লজিকাল ভলিউমকে রুট (/) হিসেবে নির্বাচন করেছেন।\n"
"/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n"
"অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন"
#: fsedit.pm:412
#, c-format
msgid ""
"You may not be able to install lilo (since lilo does not handle a LV on "
"multiple PVs)"
msgstr ""
"আপনি lilo ইনস্টল করতে সক্ষম হবেন না (যতক্ষন পর্যন্ত lilo অনেকগুলো PV'তে একটি LV'কে "
"ব্যবহার করতে পারবে না)"
#: fsedit.pm:415 fsedit.pm:417
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "root ফাইল সিস্টেমের মধ্যে এই ডিরেক্টরি থাকা উচিত"
#: fsedit.pm:419 fsedit.pm:421
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"এই মাউন্ট পয়েন্টের জন্য আপনার একটি সঠিক ফাইল সিস্টেম (ext2/ext3, reiserfs, xfs, "
"বা jfs) প্রয়োজন\n"
#: fsedit.pm:423
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "আপনি %s মাউন্ট পয়েন্টের জন্য একটি এনক্রিপটেড ফাইল ব্যবহার করতে পারবেন"
#: fsedit.pm:484
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "স্বয়ংক্রিয়-বন্টনের জন্য কোন খালি জায়গা নেই"
#: fsedit.pm:486
#, c-format
msgid "Nothing to do"
msgstr "কিছু করার নাই"
#: harddrake/data.pm:62 install_any.pm:1639
#, c-format
msgid "Floppy"
msgstr "ফ্লপি"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "জিপ"
#: harddrake/data.pm:88 install_any.pm:1640
#, c-format
msgid "Hard Disk"
msgstr "ডিস্ক"
#: harddrake/data.pm:97 install_any.pm:1641
#, c-format
msgid "CDROM"
msgstr "সিডিরম"
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "সিডি/ডিভিডি রাইটিং সফ্টওয়্যার"
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "ডিভিডি-রোম"
#: harddrake/data.pm:127 standalone/drakbackup:2034
#, c-format
msgid "Tape"
msgstr "টেপ"
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "ভিডিওকার্ড"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "টিভিকার্ড"
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "অন্যান্য মাল্টিমিডিয়া ডিভাইস সমূহ"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "সাউন্ডকার্ড"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "ওয়েব ক্যামেরা"
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "প্রসেসর"
#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN এডোপ্টার সমূহ"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "ইথারনেটকার্ড"
#: harddrake/data.pm:283 network/netconnect.pm:575
#, c-format
msgid "Modem"
msgstr "মডেম"
#: harddrake/data.pm:293
#, c-format
msgid "ADSL adapters"
msgstr "ADSL এডোপ্টার সমূহ"
#: harddrake/data.pm:307
#, c-format
msgid "Memory"
msgstr "মেমরি"
#: harddrake/data.pm:316
#, c-format
msgid "AGP controllers"
msgstr "AGP কন্ট্রোলার সমূহ"
#: harddrake/data.pm:325 help.pm:186 help.pm:855
#: install_steps_interactive.pm:979
#, c-format
msgid "Printer"
msgstr "প্রিন্টার"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:339
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:348
#, c-format
msgid "Joystick"
msgstr "জয়ষ্টিক"
#: harddrake/data.pm:358
#, c-format
msgid "SATA controllers"
msgstr "SATA কন্ট্রলারসমূহ"
#: harddrake/data.pm:367
#, c-format
msgid "RAID controllers"
msgstr "RAID কন্ট্রলারসমূহ"
#: harddrake/data.pm:376
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA কন্ট্রলারসমূহ"
#: harddrake/data.pm:385
#, c-format
msgid "Firewire controllers"
msgstr "Firewire কন্ট্রলারসমূহ"
#: harddrake/data.pm:394
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA কন্ট্রলারসমূহ"
#: harddrake/data.pm:403
#, c-format
msgid "SCSI controllers"
msgstr "SCSI কন্ট্রলারসমূহ"
#: harddrake/data.pm:412
#, c-format
msgid "USB controllers"
msgstr "ইউএসবি কন্ট্রলারসমূহ"
#: harddrake/data.pm:421
#, c-format
msgid "USB ports"
msgstr "ইউএসবি পোর্টসমূহ"
#: harddrake/data.pm:430
#, c-format
msgid "SMBus controllers"
msgstr "SMBus কন্ট্রলারসমূহ"
#: harddrake/data.pm:439
#, c-format
msgid "Bridges and system controllers"
msgstr "ব্রীজ এবং সিস্টেম কন্ট্রোলার সমূহ"
#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "কি-বোর্ড"
#: harddrake/data.pm:461
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
#, c-format
msgid "Mouse"
msgstr "মাউস"
#: harddrake/data.pm:483
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:492
#, c-format
msgid "Scanner"
msgstr "স্কেনার"
#: harddrake/data.pm:502 standalone/harddrake2:440
#, c-format
msgid "Unknown/Others"
msgstr "অজানা/অন্যান্য"
#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr "সিপিউ #"
#: harddrake/sound.pm:191 standalone/drakconnect:170
#: standalone/drakconnect:648
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "অনুগ্রহ করে অপেক্ষা করুন.... কনফিগারেশন প্রস্তাব করা হচ্ছে"
#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "কোন বিকল্প ড্রাইভার নেই"
# বিকল্প
#: harddrake/sound.pm:228
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"আপনার সাউন্ড কার্ড (%s) যা আপনি বর্তমানে ব্যবহার \"%s\" করছেন তার জন্য পরিচিত অন্য "
"কোন OSS/ALSA কোন ড্রাইভার নেই"
#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "সাউন্ড কনফিগারেশন"
#: harddrake/sound.pm:236
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"এখানে আপনি আপনার সাউন্ড কার্ডের (%s) জন্য বিকল্প ড্রাইভার (হয় OSS অথবা ALSA) পছন্দ "
"করতে পারেন।"
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"আপনি বর্তমানে %s\"%s\" ড্রাইভার ব্যবহার করছেন (আপনার সাউন্ড কার্ডের স্বাভাবিক "
"ড্রাইভার \"%s\")"
#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) ছিল প্রথম সাউন্ড API. এটা হচ্ছে একটি ওএস স্বাধীন সাউন্ড "
"API (এটা বেশিরভাগ UNIX(tm) সিস্টেমে পাওয়া যায়) কিন্তু এটা খুব সাধারণ এবং "
"স্বল্পসংখ্যক API.\n"
"নতুন আর কি, OSS ড্রাইভার সব চাকা নতুন করে তৈরি করে।\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) হচ্ছে একটি নিয়ন্ত্রিত আর্কিটেকচার যা\n"
"ISA, ইউএসবি এবং PCI cards এর একটি বড় সীমা সমর্থন করে।\n"
"\n"
"এটা OSS এর চেয়ে বেশি API প্রদান করে\n"
"\n"
"alsa ব্যবহার করতে, একজন ব্যবহার করতে পারে:\n"
"- পুরাতন সমর্থিত OSS api\n"
"- নতুন ALSA api যা অনেক সুবিধা প্রদান করে কিন্তু ALSA লাইব্রেরী কতৃক ব্যবহৃত।\n"
#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "ড্রাইভার"
#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr "ট্রাবল শুটিং"
#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
#: network/ndiswrapper.pm:95 network/netconnect.pm:561
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
#: standalone/drakTermServ:326 standalone/drakTermServ:1136
#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:1007
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "নোটিশ"
#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"পুরাতন \"%s\" ড্রাইভার কালো তালিকা ভুক্ত।\n"
"\n"
"এটি কার্ণেল আনলোড করার সময় oops কে রিপোর্ট করে।\n"
"\n"
"নতুন \"%s\" শুধুমাত্র পরবর্তী বুটস্ট্র্যাপে ব্যবহৃত হবে।"
#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr "কোন ওপেন সোর্স ড্রাইভার নেই"
#: harddrake/sound.pm:279
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"আপনার সাউন্ড কার্ডের (%s) জন্য কোন ফ্রী ড্রাইভার নেই, কিন্তু একটি অংশিদারী ড্রাইভার "
"\"%s\"-এ আছে।"
#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "কোন পরিচিত ড্রাইভার নেই"
#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "আপনার সাউন্ড কার্ড (%s)-এর জন্য কোন পরিচিত ড্রাইভার নেই"
#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "অপরিচিত ড্রাইভার"
#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "ভুল: আপনার সাউন্ড কার্ডের \"%s\" ড্রাইভারটি তালিকায় নেই"
#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr "সাউন্ড ট্রাবল শুটিং"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"ক্লাসিক বাগ সাউন্ড পরীক্ষক নিম্নলিখিত কমান্ডগুলো চালু করে:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" ডিফল্টভাবে আপনার কার্ড যেই ড্রাইভার \n"
"ব্যবহার করছে তা আপনাকে বলবে\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" আপনার বর্তমানে ব্যবহৃত \n"
"ড্রাইভারের কথা বলবে\n"
"\n"
"- \"/sbin/lsmod\" যদি এর মডিউল (ড্রাইভার) লোড হয় বা না হয় তবে সে ব্যাপারে "
"পরীক্ষা \n"
"করতে আপনাকে সক্রিয় করে তুলবে\n"
"\n"
"- \"/sbin/chkconfig --list sound\" এবং \"/sbin/chkconfig --list alsa\" যদি\n"
"সাউন্ড এবং alsa সার্ভিসগুলো initlevel 3 তে চলার জন্য কন্ফিগার করা থাকে তাহলে \n"
"আপনাকে বলবে\n"
"\n"
"- \"aumix -q\" যদি সাউন্ড বন্ধ থাকে বা না থাকে তাহলে আপনাকে বলবে\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" কোন প্রোগ্রাম সাউন্ড কার্ড ব্যবহার করছে সেটা বলবে\n"
#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "আমাকে যেকোন ড্রাইভার নিতে দাও"
#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "ইচ্ছেমত ড্রাইভার পছন্দ"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"আপনি যদি মনে করেন যে কোন ড্রাইভার আপনার কার্ডের জন্য ঠিক হবে\n"
"তাহলে উপরের লিষ্ট থেকে আপনি একটি পছন্দ করে নিতে পারেন।\n"
"\n"
"আপনার \"%s\"-এর বর্তমান ড্রাইভার \"%s\""
#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
#: standalone/net_applet:77
#, c-format
msgid "Auto-detect"
msgstr "সয়ং-সনাক্ত"
#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "অজানা|সাধারণ"
#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "অজানা|CPH05X (bt878) [প্রচুর প্রস্তুতকারক]"
#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "অজানা|CPH06X (bt878) [প্রচুর প্রস্তুতকারক]"
#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"বেশিরভাগ আধুনিক টিভি কার্ডের ক্ষেত্রেই GNU/Linux -এর bttv মডিউল সঠিক প্যারামিটার "
"সয়ং সনাক্ত করে।\n"
"যদি আপনার কার্ড সনাক্ত না হয়, আপনি জোর করে এই কার্ডের জন্য সঠিক টিউনার এবং "
"কার্ডের ধরণ এখানে জোর করে দিতে পারেন। যদি প্রয়োজন হয় তাহলে শুধু আপনার কার্ডের "
"প্যারামিটার নির্বাচন করুন।"
#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "কার্ড মডেল:"
#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr "টিউনারের ধরণ:"
#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr "ক্যাপচার বাফারের সংখ্যা:"
#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "mmap'ed ক্যাপচারের জন্য ক্যাপচার বাফারের সংখ্যা"
#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr "PLL সেটিং:"
#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr "রেডিও সাপোর্ট:"
#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr "রেডিও সাপোর্ট সক্রিয় করো"
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"চালিয়ে যাওয়ার আগে, লাইসেন্সের শর্তগুলো আপনার সাবধানতার পড়া উচিত। এটা সম্পূর্ণ\n"
"ম্যান্ড্রিব লিনাক্স ডিস্ট্রিবিউশন পূর্ণ করে। যদি আপনি এখানকার সব শর্তের সাথে একমত \n"
"থাকেন, \"%s\" বাক্সটি চেক্ করুন। যদি না হয়, তাহলে \"%s\" বাটনে ক্লিক \n"
"করলে আপনার কম্পিউটার রিবুট হবে।"
#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "গ্রহণ"
# সাম:
# \"shell\" = ?
# bash
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux একটি বহু-ব্যবহারকারী সিস্টেম যেখানে প্রতিটি ব্যবহারকারী নিজস্ব পছন্দ ও\n"
"ফাইলসমূহ আলাদাভাবে রক্ষণাবেক্ষণ করতে পারে। কিন্ত এসব সংযোজিত ব্যবহারকারীরা,\n"
"\"root\" (যে কিনা সিস্টেম অ্যাডমিনিস্ট্রেটর) এর মত, তাদের নিজস্ব ফাইল ও "
"কনফিগারেশন\n"
"ছাড়া অন্য কিছু বদলাতে অনুমোদিত নয়। এটি সিস্টেমকে অনিচ্ছাকৃত বা অস্বাভাবিক পরিবর্তন "
"থেকে রক্ষা করে,\n"
"যা কিনা সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে। আপনাকে নিজের জন্য অন্তত একটি সাধারণ "
"ব্যবহারকারী\n"
" তৈরী করতে হবে -- যে অ্যাকাউন্টটি আপনি নিয়মিত কাজের জন্য ব্যবহার করবেন। যদিও "
"\"root\"\n"
" হিসেবে লগ ইন করে সব কাজই করা সম্ভব, এটি বিপদজনকও বটে! একটি ছোটখাটো ভুলের "
"কারণে\n"
" আপনার সম্পূর্ণ সিস্টেম অচল হয়ে যেতে পারে। একজন সাধারণ ব্যবহারকারী খুব বড় ভুল "
"করলেও হয়ত\n"
" কিছু তথ্য হারাতে পারে তবে সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে না।\n"
"\n"
"প্রথম ক্ষেত্রটিতে একটি আসল নাম দিন। তবে এটি অত্যাবশ্যকীয় নয় -- আপনি অন্য কিছুও "
"লিখতে\n"
"পারেন। DrakX, এর প্রথম শব্দটি নিয়ে \"%s\" এ কপি করবে, যা দিয়ে কিনা এই "
"ব্যবহারকারী\n"
"সিস্টেমে লগ ইন করবে। প্রয়োজন হলে আপনি ডিফল্ট নামটি বদল করতে পারেন। এরপর আপনাকে\n"
"একটি পাসওয়ার্ড দিতে হবে। নিরাপত্তার দৃষ্টিকোণ থেকে সাধারণ ব্যবহারকারীর পাসওয়ার্ড, "
"\"root\" এর\n"
"পাসওয়ার্ডের মত জরুরী নয় তবে এটিকে খালি রাখা বা সহজ পাসওয়ার্ড দেয়া উচিত নয়, কারণ "
"এতে\n"
"আপনার ফাইলসমূহ অরক্ষিত থেকে যায়।\n"
"\n"
"\"%s\" তে ক্লিক করার পর আপনি আরও ব্যবহারকারী তৈরী করতে পারেন। আপনার পরিবারের\n"
"সদস্য ও বন্ধুদের জন্য আলাদা আলাদা একাউন্ট তৈরী করুন। শেষ হলে \"%s\" ক্লিক করুন।\n"
"\n"
"\"%s\" বাটনে ক্লিক করে আপনি একজন ব্যবহারকারীর ডিফল্ট \"শেল\" বদল করতে পারেন\n"
"(ডিফল্ট মান bash)।\n"
"\n"
"সব ব্যবহারকারী তৈরীর পর আপনাকে একটি বেছে নিতে হবে যা কিনা কম্পিউটার বুট করার "
"পর\n"
"স্বয়ংক্রিয়ভাবে লগইন হবে। আপনি যদি এই ফিচারে আগ্রহী হন(এবং স্থানীয় নিরাপত্তা নিয়ে "
"বিচলিত\n"
"না হন), তবে পছন্দনুযায়ী ব্যবহারকারী ও উইন্ডো ম্যানেজার নির্বাচন করুন এবং \"%s\" "
"টিতে ক্লিক\n"
"করুন। অন্যথায় \"%s\" চেকবক্সটি আনচেক করুন।"
#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "ইউজারের নাম"
# পরবর্তি
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
#: standalone/drakTermServ:383 standalone/drakbackup:3938
#: standalone/drakbackup:4032 standalone/drakbackup:4049
#: standalone/drakbackup:4067 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "পরবর্তী"
# সাম:
# secondary = সহকারী?
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"আপনার হার্ড ড্রাইভে বর্তমানে নিম্নলিখিত লিনাক্স পার্টিশনগুলো বিদ্যমান।\n"
"আপনি উইজার্ড কর্তৃক বাছাইকৃত সেটিংসমূহ রাখতে পারেন কারণ বেশীরভাগ\n"
"সাধারণ ইনস্টলেশনের ক্ষেত্রে এটিই যথেষ্ট। যদি পরিবর্তন করতে চান, আপনাকে অন্তত একটি\n"
"রুট পার্টিশন তৈরী করতে হবে (\"/\")। পার্টিশনের সাইজ খুব ছোট না হওয়া জরুরী, কারন\n"
"অন্যথা আপনি যথেষ্ট সফ্টওয়্যার ইনস্টল করতে পারবেন না। আপনার তথ্যসমূহ আলাদা\n"
"পার্টিশনে রাখতে চাইলে, আপনাকে আরও একটি \"/home\" পার্টিশন তৈরী করতে হবে\n"
"(যা কিনা একাধিক লিনাক্স পার্টিশন থাকলেই সম্ভব)।\n"
"\n"
"পার্টিশনগুলো তালিকায় এভাবে দেখানো হয়েছে: \"নাম\", \"ধারণক্ষমতা\".\n"
"\n"
"\"নাম\" এর কাঠামো হচ্ছে: \"হার্ড ড্রাইভের ধরন\", \"হার্ড ড্রাইভ নাম্বার\",\n"
"\"পার্টিশন নাম্বার\" (যেমন, \"hda1\").\n"
"\n"
"যদি আপনার হার্ড ড্রাইভটি IDE হার্ড ড্রাইভ হলে \"হার্ড ড্রাইভের ধরন\" হবে \"hd\", "
"আর\n"
" SCSI হার্ড ড্রাইভ হলে হবে \"sd\"।\n"
"\n"
"\"হার্ড ড্রাইভ নাম্বার\", হচ্ছে \"hd\" বা \"sd\" এর পরের একটি অক্ষর। IDE হার্ড "
"ড্রাইভের\n"
"জন্য:\n"
"\n"
" * \"a\" অর্থ \"প্রাথমিক IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
"\n"
" * \"b\" অর্থ \"প্রাথমিক IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\";\n"
"\n"
" * \"c\" অর্থ \"সহকারী IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
"\n"
" * \"d\" অর্থ \"সহকারী IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\".\n"
"\n"
"SCSI হার্ড ড্রাইভের জন্য, \"a\" অর্থ \"সর্বনিম্ন SCSI ID\", \"b\" অর্থ\n"
"\"দ্বিতীয় সর্বনিম্ন SCSI ID\", ইত্যাদি।"
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"ম্যান্ড্রিব লিনাক্স ইনস্টলেশন কয়েকটি সিডি'তে ভাগ করা থাকে। যদি একটি চিহ্নিত "
"প্যাকেজ\n"
"অন্য সিডি'তে থেকে থাকে, তাহলে DrakX বর্তমান সিডি'টি বের করে দেয় এবং "
"প্রয়োজনীয়টি\n"
"প্রবেশ করাতে জিজ্ঞেস করে। যদি এরকম অনুরোধ না আসে, তাহলে \"%s\" তে ক্লিক করুন,\n"
"যথাযথ প্যাকেজগুলো ইনস্টল হবে না।"
# সাম:
# documentation = ডকুমেন্টেশন
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"এখন আপনাকে নির্বাচন করতে হবে আপনি কোন কোন প্রোগ্রাম সিস্টেমে ইনস্টল করতে চান।\n"
"Mandriva Linux এর জন্য কয়েক হাজার প্যাকেজ রয়েছে, এবং ব্যাবস্থাপনার সুবিধার্থে "
"সেগুলোকে\n"
"অ্যাপ্লিকেশনের ধরন অনুযায়ী ভাগ করা হয়েছে।\n"
"\n"
"Mandriva Linux সব প্যাকেজগ্রুপসমূহ চারটি শ্রেণীতে ভাগ করে। আপনি বিভিন্ন শ্রেণীর\n"
"অ্যাপ্লিকেশনমিলিয়ে ও মিশিয়ে ইনস্টল করতে পারেন, যেমন একটি ``Workstation''\n"
"ইনস্টলেশনে আপনি ''Server'' শ্রেণী থেকে অ্যাপ্লিকেশন ইনস্টল\n"
"করতে পারেন।\n"
"\n"
" * \"%s\": আপনি যদি আপনার মেশিনটি ওয়ার্কস্টেশন হিসেবে ব্যবহার করতে চান, "
"Workstation''\n"
"শ্রেণী থেকে এক বা একাধিক গ্রুপ নির্বাচন করুন।\n"
"\n"
" * \"%s\": আপনি যদি আপনার মেশিনটি প্রোগ্রামিংএর জন্য ব্যবহার করতে চান, সে "
"অনুযায়ী\n"
"গ্রুপ নির্বাচন করুন। \"LSB\" নামের বিশেষ গ্রুপটি আপনার সিস্টেমকে এমনভাবে\n"
"কনফিগার করবে যাতে তা Linux Standard Base স্পেসিফিকেশনের সাথে যতদূর\n"
"সম্ভব সামঞ্জস্য বজায় রাখে।\n"
"\n"
"\"LSB\" গ্রুপটি নির্বাচন করলে, ডিফল্ট \"2.6\" কার্নেল সিরিজের বদলে\n"
"\"2.4\" সিরিজটি ইনস্টল হবে। এটি করা হয় সিস্টেমকে 100%%-LSB সামঞ্জস্যপূর্ণ\n"
"করার জন্য। তবে, আপনি \"LSB\" গ্রুপটি নির্বাচন না করলেও আপনার সিস্টেম প্রায়\n"
"100%%-LSB সামঞ্জস্যপূর্ণ হবে।\n"
"\n"
"* \"%s\": আপনার মেশিনটি যদি সার্ভার হিসেবে ব্যবহৃত হয়, আপনার মেশিনে কোন সাধারন\n"
" সার্ভিসসমূহ ইনস্টল করতে চান তা নির্বাচন করুন।\n"
"\n"
" * \"%s\": এখানে আপনার পছন্দ অনুযায়ী গ্রাফিক্যাল প্রতিবেশ নির্বাচন\n"
"করুন। আপনি যদি গ্রাফিক্যাল ইন্টারফেস ব্যবহার করতে চান, অন্তত একটি অবশ্যই\n"
"নির্বাচন করতে হবে।\n"
"\n"
"কোন গ্রুপ নামের উপর মাউস কার্সার রাখলে ঐ গ্রুপ সম্পর্কে টীকা প্রদর্শিত হবে।\n"
"\n"
"আপনি \"%s\" বক্সটি চেক করতে পারেন, যা কিনা প্রয়োজনীয় যদি আপনি প্যাকেজগুলো\n"
"সম্পর্কে পরিচিত হন বা কোন কোন প্যাকেজ ইনস্টল হবে তা সম্পূর্ণভাবে নিয়ন্ত্রন\n"
"করতে চান।\n"
"\n"
"\"%s\" মোডে ইনস্টলেশন শুরু করলে, আপনি সব গ্রুপ ডিসিলেক্ট করে নতুন প্যাকেজ\n"
"ইনস্টলেশন বাতিল করতে পারেন। এটি একটি বিদ্যমান সিস্টেম মেরামত ও আপডেট\n"
"করার জন্য প্রযোজ্য।\n"
"\n"
"আপনি যদি একটি সাধারণ ইনস্টলেশনের ক্ষেত্রে (আপগ্রেড নয়), সব গ্রুপ\n"
"ডিসিলেক্ট করে থাকেন, তবে একটি পপআপ ডায়ালগে সর্বনিম্ন ইনস্টলেশনের কিছু\n"
"অপশন পরামর্শ করা হবে:\n"
"\n"
"* \"%s\": একটি সক্রিয় গ্রাফিক্যাল ডেস্কটপের জন্য প্রয়োজনীয় সর্বনিম্ন প্যাকেজ ইনস্টল "
"কর।\n"
"\n"
"* \"%s\": মূল সিস্টেম, প্রাথমিক ইউটিলিটিসমূহ ও তাদের ডকুমেন্টেশন ইনস্টল করে। এই "
"ইনস্টলেশনটি সার্ভার সেটআপ করার জন্য উপযুক্ত।\n"
"\n"
"* \"%s\": একটি সক্রিয় Linux সিস্টেমের জন্য জরুরী সর্বনিম্ন সংখ্যক প্যাকেজ ইনস্টল করে। "
"এ\n"
" ইনস্টলেশনে আপনি শুধু একটি কমান্ড লাইন ইন্টারফেস পাবেন। ইনস্টলেশনে মোট সাইজ প্রায় "
"৬৫\n"
" মেগাবাইট।"
#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "ওয়ার্কষ্টেশন"
#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "ডেভলপমেন্ট"
#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "গ্রাফিকাল পরিবেশ"
#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "আলাদাভাবে প্যাকেজ নির্বাচন"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "আপগ্রেড"
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "X-এর সাথে"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "সাধারণ ডকুমেন্টেশন"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "এক্কেবারেই সল্প ইনস্টলেশন"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "সয়ংক্রিয় নির্ভরতা"
# sam
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": \"%s\" বাটনে ক্লিক করলে প্রিন্টার কনফিগারেশন উইজার্ড খুলবে।\n"
"প্রিন্টার কনফিগারেশন সম্বন্ধে আরো জানতে, \"স্টার্টার গাইড\" এর যথাযথ\n"
"অধ্যায়ের পরামর্শ নিন। আমাদের সহায়িকাতে দেখানো ইন্টারফেসটি, ইনস্টলেশনে\n"
"ব্যবহৃত ইন্টারফেসের অনুরুপ। "
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
#: standalone/drakbackup:2325 standalone/drakbackup:2329
#: standalone/drakbackup:2333 standalone/drakbackup:2337
#, c-format
msgid "Configure"
msgstr "কনফিগার"
# সাম
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"এই ডায়ালগটি আপনি বুট করার সময় কি কি সার্ভিস শুরু করতে চান তা নির্বাচন করার জন্য।\n"
"\n"
"DrakX বর্তমান ইনস্টলেশনে বিদ্যমান সব সার্ভিস দেখাবে। প্রতিটি সার্ভিস ভালভাবে দেখুন "
"এবং\n"
"বুটের সময় যেগুলো প্রয়োজন না হয়, সেগুলো আনচেক করুন।\n"
"\n"
"একটি সার্ভিস নির্বাচন করলে, সার্ভিসটি সম্পর্কে সংক্ষিপ্ত তথ্য প্রদর্শিত হবে। আপনি যদি "
"কোন সার্ভিসের\n"
"আবশ্যকতা সম্পর্কে নিশ্চিত না হন তবে ডিফল্ট মানে রেখে দেয়াই নিরাপদ।\n"
"\n"
"!! আপনি আপনার মেশিন সার্ভার হিসেবে ব্যবহার করতে চাইলে খুব সাবধান থাকবেন: আপনি "
"অবশ্যই\n"
"কোন অবাঞ্ছনীয় সার্ভিস চালু করতে চান না কারন কিছু সার্ভিস সার্ভারে সক্রিয় করাটা "
"বিপদজনক।\n"
"এক কথায়, শুধু সেসব সার্ভিসই চালু করুন যেসব আপনার প্রয়োজন। !!"
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:874
#, c-format
msgid "Hardware clock set to GMT"
msgstr "হার্ডওয়্যারে ঘড়ি GMT-এ সেট করা"
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "সয়ংক্রিয় সময় মেলানো"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"গ্রাফিক কার্ড\n"
"\n"
" সাধারণত ইনস্টলার আপনার মেশিনে ইনস্টলকৃত গ্রাফিক কার্ড স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
"এবং কন্ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই কার্ড\n"
"আপনি ইনস্টল করেছেন সেটা বেছে নিতে পারবেন।\n"
"\n"
" এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
"আপনাকে জিজ্ঞেস করা হবে।"
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"মনিটর\n"
"\n"
" সাধারণত ইনস্টলার আপনার মেশিনে সংযুক্ত মনিটর স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
"এবং কন্ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই মনিটর\n"
"আপনার কম্পিউটারে সংযুক্ত করেছেন সেটা বেছে নিতে পারবেন।"
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"রেজ্যুলুশন\n"
"\n"
" এখানে আপনার গ্রাফিক্স হার্ডওয়্যারের রেজ্যুলুশন এবং রংয়ের গভীরতা বেছে নিতে \n"
"পারেন। আপনার প্রয়োজনের সাথে যেটি সবচেয়ে ভাল হয় তার যেকোন একটি বেছে নিন\n"
"(ইনস্টলেশনের পর আপনি তা পরিবর্তন করতে সমর্থ হবেন)। বেছে নেয়া কন্ফিগারেশনের\n"
"নমুনা মনিটরের ছবিতে দেখানো হচ্ছে।"
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
"আপনাকে জিজ্ঞেস করা হবে।"
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"অপশন\n"
"\n"
" এই ধাপগুলো বুট করার সময় স্বয়ংক্রিয়ভাবে আপনি যেখানে আপনার মেশিনের গ্রাফিকাল\n"
"ইন্টারফেস বাছাই করার অনুমতি পাবেন। সুস্পষ্টভাবেই, যদি আপনার মেশিনকে একটি সার্ভার "
"হিসেবে\n"
"ব্যবহার করতে চান, তাহলে আপনি \"%s\" দিয়ে পরীক্ষা করে নিতে পারেন, অথবা যদি "
"আপনি\n"
"সফলভাবে ডিসপ্লে কন্ফিগার করতে না পারেন।"
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "শুণ্য স্থান ব্যবহার করো"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "উপস্থিত পার্টিশন ব্যবহার করো"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "উইন্ডোজ পার্টিশনের খালি জায়গা ব্যবহার করে"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "সম্পূর্ণ ডিস্ক মুছে ফেলো"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "উইন্ডোজ সরাও"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "হাতে হাতে ডিস্ক পার্টিশন"
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "সয়ংক্রিয়-ইনস্টল ফ্লপি তৈরী করো"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Replay"
msgstr "জবাব"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Automated"
msgstr "সয়ংক্রিয়ভাবে"
#: help.pm:409 install_steps_interactive.pm:1334
#, c-format
msgid "Save packages selection"
msgstr "প্যাকেজের নির্বাচন সংরক্ষণ করে রাখো"
# সাম
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"আপনি যদি পুরানো GNU/Linux পার্টিশন আবার ব্যবহার করতে চান, আপনি হয়ত কোন পার্টিশন "
"নতুন করে ফরম্যাট করে পুরানো তথ্য মুছে ফেলতে চাইবেন। এটি করতে হলে, ঐ পার্টিশনগুলোও "
"নির্বাচন করুন।\n"
"\n"
"মনে রাখবেন, সব পার্টিশন ফরম্যাট করা জরুরী নয়। যে পার্টিশনে অপারেটিং সিস্টেম থাকবে "
"(যেমন \"/\", \"/usr\" বা \"/var\") সেটি অবশ্যই ফরম্যাট করতে হবে কিন্তু যেসব "
"পার্টিশনের তথ্য আপনি সংরক্ষন করতে চান (সাধারনত \"/home\") সেগুলো ফরম্যাট করা "
"অত্যাবশ্যকীয় নয়।\n"
"\n"
"পার্টিশন নির্বাচন করতে সাবধানতা অবলম্বন করবেন। ফরম্যাট করলে নির্বাচিত পার্টিশনের "
"সব তথ্য মুছে যাবে এবং তা আর ফিরে পাওয়া যাবে না।\n"
"\n"
"পার্টিশন ফরম্যাট শুরু করতে \"%s\" চাপুন।\n"
"\n"
"আপনার নতুন Mandriva Linux অপারেটিং সিস্টেম ইনস্টেশনের জন্য আপনি যদি অন্য একটি "
"পার্টিশন নির্বাচন করতে, তবে \"%s\" ক্লিক করুন।\n"
"\n"
"যদি আপনি পার্টিশনের জন্য ডিস্কের খারাপ ব্লক সনাক্ত করাতে চান তাহলে \"%s\" ক্লিক "
"করুন।"
# আগে
#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
#: interactive/newt.pm:318 printer/printerdrake.pm:3676
#: standalone/drakTermServ:362 standalone/drakbackup:3898
#: standalone/drakbackup:3937 standalone/drakbackup:4048
#: standalone/drakbackup:4063 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "পূর্ববর্তী"
# সাম
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"আপনি যখন Mandriva Linux ইনস্টল করবেন, সম্ভবত প্রথম রিলিজ থেকে কিছু\n"
"প্যাকেজ আপডেট হয়ে গেছে। কোন সাধারন বা নিরাপত্তা ত্রুটি সমাধান করা হয়েছে।\n"
"আপনাকে এই সুবিধাগুলি দেয়ার লক্ষ্যে এই আপডেটগুলো ইন্টারনেট থেকে ডাউনলোড\n"
"করার সুযোগ দেয়া হয়েছে। যদি আপনার সক্রিয় ইন্টারনেট সংযোগ থাকে, \"%s\" চেক\n"
"করুন, আর \"%s\" চেক করুন যদি আপাতত ইনস্টল করতে না চান।\n"
"\n"
"\"%s\" বাছাই করলে আপাকে কিছু ওয়েব লোকেশনের তালিকা দেয়া হবে যেখান থেকে\n"
"আপডেট পাওয়া যাবে। আপনি আপনার কাছের একটি লোকেশন পছন্দ করুন। এরপর\n"
"একটি প্যাকেজ নির্বাচন করার জন্য একটি ট্রী দেখানো হবে। প্যাকেজগুলো দেখুন এবং\n"
"ডাউনলোড করে ইনস্টল করতে \"%s\" বাটন চাপুন। অথবা \"%s\" ক্লিক করে বের হয়ে আসুন।"
# ইনস্টল
#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
#: install_steps_interactive.pm:156 standalone/drakbackup:4095
#, c-format
msgid "Install"
msgstr "ইনস্টল"
# সাম
# নিরাপত্তা স্তর
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"এই সময়ে DrakX আপনার মেশিনের জন্য আপনার ইচ্ছানুযায়ী নিরাপত্তা স্তর\n"
"বেছে নেয়ার সুযোগ দেবে। সাধারন নিয়ম অনুযায়ী, যদি একটি মেশিনে জরুরী\n"
"তথ্য থাকে বা মেশিনটি ইন্টারনেটে সংযুক্ত থাকে তবে নিরাপত্তা বাড়িয়ে দেয়া\n"
"হয়। নিরাপত্তা যত বেশী, ব্যবহারের স্বাচ্ছন্দ্য তত কমে যায়।\n"
"\n"
"আপনি যদি নিশ্চিত না হন কোন অপশনটি রাখবেন তবে ডিফল্ট অপশনটিই রাখুন।\n"
"পরবর্তীতে আপনি এটি draksec টুল (যেটি Mandriva Linux নিয়ন্ত্রন কেন্দ্রের একটি অংশ)\n"
"দিয়ে পরিবর্তন করতে পারবেন।\n"
"\n"
"\"%s\" ক্ষেত্রটিতে যিনি নিরাপত্তার দায়িত্বে নিয়োজিত তার ই-মেইল অ্যাড্রেস দিন।\n"
"নিরাপত্তা বিষয়ক বার্তাগুলো এই অ্যাড্রেসে পাঠানো হবে। "
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "সিকিউরিটি এ্যডমিনিস্ট্রেটর"
# সাম
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"এই সময়ে আপনাকে Mandriva Linux যে পার্টিশনে ইনস্টল হবে তা নির্বাচন\n"
"করতে হবে। যদি আগে থেকেই পার্টিশন তৈরী থাকে, (GNU/Linux এর পুর্বের\n"
"কোন ইনস্টলেশনের কারনে বা অন্য কোন পার্টিশন টুল দিয়ে তৈরী করা) আপনি\n"
"সেগুলো ব্যবহার করতে পারেন। অন্যথায় হার্ডড্রাইভ পার্টিশন তৈরী করতে হবে।\n"
"\n"
"পার্টিশন তৈরী করতে প্রথমে একটি হার্ডড্রাইভ নির্বাচন করুন। প্রথম পার্টিশন\n"
"নির্বাচনের জন্য \"hda\", দ্বিতীয় পার্টিশনের জন্য \"hdb\", প্রথম SCSI ড্রাইভের\n"
"জন্য \"sda\" ইত্যাদি ক্লিক করুন।\n"
"\n"
"নির্বাচিত ড্রাইভটি পার্টিশন করতে নিম্নলিখিত অপশনসমূহ ব্যবহার করুন:\n"
"\n"
" * \"%s\": এই অপশনটি নির্বাচিত ড্রাইভের সব পার্টিশন মুছে দিবে\n"
"\n"
" * \"%s\": এই অপশনটি আপনার হার্ডড্রাইভের খালি অংশে স্বয়ংক্রিয়ভাবে ext3 এবং\n"
"swap পার্টিশন তৈরী করতে দিবে।\n"
"\n"
"\"%s\": আরও ফিচার ব্যবহার করার সুযোগ দেয়:\n"
"\n"
" * \"%s\": পার্টিশন টেবিলটি ফ্লপিতে সংরক্ষন করে যা কিনা পরবর্তীতে পার্টিশন\n"
"টেবিল উদ্ধার করতে কাজে লাগে। এটি খুবই গুরুত্বপুর্ণ একটি ধাপ যেটি আপনার\n"
"করা উচিত।\n"
"\n"
" * \"%s\": ফ্লপি ডিস্কে সংরক্ষিত পার্টিশন টেবিল এনে তা পুর্বাবস্থায় ফিরিয়ে নেয়।\n"
"\n"
" * \"%s\": আপনার পার্টিশন টেবিল নষ্ট হলে আপনি এই অপশনটি দিয়ে তা মেরামত\n"
"করার চেষ্টা করতে পারেন। অনুগ্রহ করে সাবধানতা অবলম্বন করবেন এবং মনে রাখবেন\n"
"এই প্রক্রিয়া সবসময় সফল নাও হতে পারে।\n"
"\n"
" * \"%s\": সব পরিবর্তন বাতিল করে দিয়ে হার্ডড্রাইভের পুর্বের মূল পার্টিশন টেবিল লোড "
"করে।\n"
"\n"
" * \"%s\": এই অপশনটি অনির্বাচিত করলে, ব্যবহারকারীদের রিমুভেবল মাধ্যম যেমন\n"
"ফ্লপি এবং CD-ROM নিজে নিজে মাউন্ট/আনমাউন্ট করার প্রায়োজন পরবে।\n"
"\n"
" * \"%s\": এই অপশনটি ব্যবহার করুন যদি হার্ডড্রাইভ পার্টিশন আপনি উইজার্ডের\n"
"মাধ্যমে করতে চান। পার্টিশন সম্বন্ধে ভাল ধারনা না থাকলে এই অপশনটি পরামর্শনীয়।\n"
"\n"
" * \"%s\": এই অপশনটি ব্যবহার করে পরিবর্তনগুলো বাতিল করুন।\n"
"\n"
" * \"%s\": আপনার পার্টিশনে আরও কিছু কাজ (ধরন, অপশন ফরম্যাট) করার অপশন\n"
"দেয় ও হার্ডড্রাইভ সম্পর্কে আরও তথ্য দেয়।\n"
"\n"
" * \"%s\": পার্টিশন করা শেষ হলে এই অপশন আপনার সেটিংগুলো ডিস্কে সংরক্ষণ করবে।\n"
"\n"
"পার্টিশনের সাইজ ঠিক করতে আপনি কীবোর্ডের তীর চিহ্নিত কীগুলো ব্যবহার করতে পারেন।\n"
"\n"
"দ্রষ্টব্য: আপনি যেকোন অপশন কীবোর্ড দিয়ে নির্বাচন করতে পারেন। পার্টিশন নির্বাচন\n"
"করতে [Tab] এবং [Up/Down] তীর চিহ্নগুলো ব্যবহার করুন।\n"
"\n"
"যখন একটি পার্টিশন নির্বাচন অবস্থায় আছে, আপনি নিম্নলিখিত কীগুলো ব্যবহার করতে "
"পারেন:\n"
"\n"
" * Ctrl-c নতুন পার্টিশন তৈরী করার জন্য (যখন একটি খালি পার্টিশন নির্বাচন করা "
"হয়েছে)\n"
"\n"
" * Ctrl-d একটি পার্টিশন মুছে দিতে\n"
"\n"
" * Ctrl-m মাউন্ট পয়েন্ট সেট করতে\n"
"\n"
"বিদ্যমান ফাইল সিস্টেমের ধরন সম্পর্কে জানতে হলে \"Reference Manual\" এর\n"
"ext2FS অধ্যায়টি পড়ুন।\n"
"\n"
"আপনি যদি PPC মেশিনে ইনস্টল করেন, তাহলে আপনাকে yaboot বুটলোডারের\n"
"ব্যবহারের জন্য একটি ছোট অন্তত ১ এমবি এর HFS \"বুটস্ট্র্যাপ\" পার্টিশন তৈরী করতে "
"হবে।\n"
"আপনি যদি পার্টিশনটি আরও বড় করতে চান, যেমন ৫০ MB, আপনি কোন জরুরী বুট সমস্যার\n"
"জন্য একটি আলাদা কার্নেল এবং ramdisk তৈরী করে এই পার্টিশনে রাখতে পারেন।"
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "রিমুভযোগ্য মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "সাধারণ/দক্ষ মোডের মধ্যে পরিবর্তন"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": বর্তমান দেশ নির্বাচন পরীক্ষা করুন। আপনি যদি এই দেশের জন্য না হন,\n"
"তাহলে \"%s\" বাটনে ক্লিক করুন এবং অন্য একটি বেছে নিন। যদি আপনার দেশ\n"
"উল্লেখিত তালিকায় না থাকে, তাহলে \"%s\" বাটনে ক্লিক করে সম্পূর্ণ দেশের তালিকায় "
"পেয়ে যান।"
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
# সাম
# ইনস্টলেশন
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"আপনার ভাষা নির্বাচনের উপর ভিত্তি করে, DrakX স্বয়ংক্রিয়ভাবে একটি কীবোর্ড\n"
"কনফিগারেশন বেছে নেবে। এই নির্চনটি বাঞ্ছনীয় কিনা দেখে নিন বা অন্য একটি\n"
"লেআউট পছন্দ করুন।\n"
"\n"
"আপনার ভাষার সাথে সম্পূর্ন মিলিয়ে কীবোর্ড আপনি নাও পেতে পারেন:\n"
"যেমন যদি আপনি ইংরেজী ভাষাভাষী একজন সুইস নাগরিক হন, আপনি সুইস কীবোর্ড\n"
"ব্যবহার করতে পারেন। কিন্তু আপনি যদি ইংরেজী ভাষী হয়ে Quebec এ বসবাস\n"
"করেন আপনার পরিস্থিতি এমন হতে পারে যেখানে country-set কীবোর্ড এবং\n"
"নিজস্ব ভাষা একই নয়। যেকোন ক্ষেত্রেই আপনি আপনি একটি তালিকা থেকে সঠিক\n"
"কীবোর্ডটি বেছে নিতে পারেন।\n"
"\n"
"সমর্থিত কীবোর্ডের তালিকা দেখতে \"%s\" বাটনে ক্লিক করুন।\n"
"\n"
"যদি আপনি নন-ল্যাটিন বর্ণমালার কীবোর্ডে লেআউট বাছাই করেন, পরবর্তী ডায়ালগটি\n"
"আপনাকে ল্যাটিন ও নন-ল্যাটিন কীবোর্ডের মধ্যে সুইচ করার জন্য একটি কী বাইন্ডিং\n"
"বাছাই করতে হবে।"
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "স্পেনীয়"
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "চাকার বৈশিষ্ঠ অনুহকরণ"
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Universal | যে কোন PS/2 এবং ইউএসবি মাউস"
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"সঠিক পোর্টটি নির্বাচন করুন। যেমন, উইন্ডোজের \"COM1\" পোর্টটি GNU/Linux-এ\n"
"\"ttyS0\" নামে পরিচিত।"
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:722
#, c-format
msgid "authentication"
msgstr "অনুমোদন"
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
# সাম
# emulate = এমুলেট?
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"এখন সময় আপনার কম্পিউটারের জন্য একটি প্রিন্টিং সিস্টেম নির্বাচন করার। অনান্য\n"
"অপারেটিং সিস্টেম আপনাকে একটি অপশন দিতে পারে কিন্তু Mandriva Linux দেবে দুটি।\n"
"প্রিন্টিং সিস্টেমগুলো বিভিন্ন কনফিগারেশনের জন্য প্রযোজ্য।\n"
"\n"
" * \"%s\" -- অর্থ হচ্ছে \"প্রিন্ট করো, সারিতে রাখবেনা\". এটি নির্বাচন করুন যদি "
"আপনার কোন\n"
"প্রিন্টারের সাথে সরাসরি সংযোগ থাকে, আপনি প্রিন্টার জ্যাম থেকে জরুরীভাবে বের হয়ে "
"যেতে\n"
"চান এবং যদি আপনার নেটওয়ার্ক প্রিন্টার না থাকে।(\"%s\" শুধুমাত্র খুবই সাধারন "
"নেটওয়ার্ক\n"
"সামলাতে পারে এবং কিছুটা ধীর হয়)। এটি আপনার GNU/Linux এর প্রথম অভিজ্ঞতা হলে\n"
"আপনার \"pdq\" ব্যবহার করাটাই শ্রেয়।\n"
"\n"
" * \"%s\" অর্থ \"সাধারন Unix প্রিন্টিং সিস্টেম\" এবং এটি আপনার স্থানীয় প্রিন্টার "
"হোক\n"
"বা পৃথিবীর অন্য প্রান্তে অবস্থিত কোন প্রিন্টারই হোক যেকোন ক্ষেত্রেই একটি উত্কৃষ্ট "
"সিস্টেম।\n"
"এটি কনফিগার করতে সহজ এবং পুরোনো \"lpd\" প্রিন্টিং সিস্টেমের জন্য সার্ভার বা "
"ক্লায়েন্ট\n"
"হিসেবে কাজ করতে পারে। অতএব এটি পুরানো অপারেটিং সিস্টেম যেগুলোর সার্ভিস প্রয়োজন\n"
"তাদের সাথেও সামঞ্জস্যপূর্ণ। যদিও খুব শক্তিশালী, মূল সেটআপটি প্রায় \"pdq\" এর মত "
"সহজ।\n"
"আপনি যদি \"lpd\" সার্ভার এমুলেট করতে চান, তবে \"cups-lpd\" daemon টি চালু করতে\n"
"ভুলবেন না। \"%s\" এর প্রিন্টার অপশন বাছাই করা ও প্রিন্টার ব্যবস্থাপনার জন্য একটি "
"গ্রাফিক্যাল\n"
"ইন্টারফেস রয়েছে।\n"
"\n"
"আপনার বাছাইকৃত প্রিন্টিং সিস্টেমটি যদি আপনার পরে পছন্দ না হয়,\n"
"তবে আপনি Mandriva Linux নিয়ন্ত্রন কেন্দ্র থেকে PrinterDrake চালিয়ে ও \"%s\" বাটন "
"ক্লিক\n"
"করে তা বদল করতে পারেন।"
#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"
#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
#, c-format
msgid "CUPS"
msgstr "CUPS"
#: help.pm:765
#, c-format
msgid "Expert"
msgstr "দক্ষ"
# সাম
# check উচিত spelling, zwj didn't work for me...
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX প্রথমে আপনার কম্পিউটারে বিদ্যমান IDE ডিভাইস সনাক্ত করবে। এটি আপনার\n"
"সিস্টেমে এক বা একাধিক PCI SCSI কার্ডের জন্যেও স্ক্যান করবে। যদি SCSI কার্ড পাওয়া\n"
"যায়, DrakX নিজে নিজেই সঠিক ড্রাইভারটি ইনস্টল করবে।\n"
"\n"
"যেহেতু হার্ডওয়্যার সনাক্তকরন কোন অব্যার্থ পক্রিয়া নয়, DrakX আপনার হার্ডড্রাইভ সনাক্ত\n"
"নাও করতে পারে। এ ক্ষেত্রে আপনাকে হার্ডওয়্যারটি নিজ হাতে নির্দিষ্ট করে দিতে হবে।\n"
"\n"
"PCI SCSI adapter নিজ হাতে নির্দিষ্ট করে দিতে হলে, DrakX আপনাকে জিজ্ঞাসা করবে\n"
"আপনি অপশন কনফিগার করতে চান কিনা। আপনার DrakX কে হার্ডওয়্যারটির নির্দিষ্ট কার্ডের\n"
"অপশনের জন্য প্রোব করতে দেয়া উচিত্ যা কিনা adapter ইনিশিয়ালাইজ করতে প্রয়োজন।\n"
"বেশীরভাগ ক্ষেত্রে DrakX এই কাজটি কোন ঝামেলা ছাড়াই সম্পন্ন করবে।\n"
"\n"
"DrakX যদি প্রোব করে হার্ডওয়্যারে পাঠানোর জন্য প্যারামিটারগুলো নির্ধারন করতে না "
"পারে\n"
"তাহলে আপনাকে তা নিজে হাতে কনফিগারেশন করতে হবে।\n"
" "
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": যদি আপনার সিস্টেমে একটি সাউন্ড কার্ড পাওযা যায়, সেটা এখানে দেখানো হবে।\n"
"যদি আপনি জানান যে আসলে এই সাউন্ড কার্ডটি আপনার সিস্টেমে উপস্থিত নেই, তাহলে আপনি\n"
"বাটনে ক্লিক করুন এবং অন্য একটি ড্রাইভার বেছে নিন।"
#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
#: install_steps_interactive.pm:1023
#, c-format
msgid "Sound card"
msgstr "সাউন্ডকার্ড"
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "টাইমজোন"
#: help.pm:855 install_steps_interactive.pm:1039
#, c-format
msgid "TV card"
msgstr "টিভি কার্ড"
#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "ISDN কার্ড"
#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "গ্রাফিকাল ইন্টারফেস"
#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
#: standalone/drakbackup:2019
#, c-format
msgid "Network"
msgstr "নেটওয়ার্ক"
#: help.pm:855 install_steps_interactive.pm:1072
#, c-format
msgid "Proxies"
msgstr "প্রক্সিসমূহ"
#: help.pm:855 install_steps_interactive.pm:1083
#, c-format
msgid "Security Level"
msgstr "সিকউরিটি লেভেল"
#: help.pm:855 install_steps_interactive.pm:1097
#, c-format
msgid "Firewall"
msgstr "ফায়ারওয়াল"
#: help.pm:855 install_steps_interactive.pm:1113
#, c-format
msgid "Bootloader"
msgstr "বুটলোডার"
#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
#, c-format
msgid "Services"
msgstr "সার্ভিস সমূহ"
#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"হার্ড ড্রাইভ বেছে নিন যেটি আপনি আপনার নতুন ম্যান্ড্রিব লিনাক্স পার্টিশন ইনস্টল করার "
"জন্য\n"
"মুছে ফেলতে চান। সাবধান, এই ড্রাইভে থাকা সকল ডাটা হারিয়ে যাবে এবং আর কখনই\n"
"পাওয়া যাবে না!"
#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"যদি এই হার্ড ড্রাইভে থাকা সব ডাটা এবং পার্টিশন মুছে ফেলতে চান তাহলে আপনি\n"
"\"%s\"তে ক্লিক করুন। সাবধান, \"%s\"তে ক্লিক করার পর, উইন্ডোজ ডাটাসহ,\n"
"আপনি এই হার্ড ড্রাইভে থাকা কোন ডাটা এবং পার্টিশন ফিরে\n"
"পাবেন না।\n"
"\n"
"এই অপারেশনের মাধ্যমে হার্ড ড্রাইভের উপস্থিত ডাটা এবং পার্টিশন হারাতে না চাইলে \"%s"
"\"তে ক্লিক করুন।"
#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "পরবর্তী ->"
#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- পূর্ববর্তী"
#: install2.pm:117
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"আপনার কার্ণেলের কার্ণেল মডিউলগুলোতে প্রবেশ করতে পারছে না (%s ফাইলটি হারিয়া "
"গেছে), এর স্বাভাবিক অর্থ হচ্ছে আপনার বুট ফ্লপি ইনস্টলেশন মিডিয়ামের সাথে sync এ নেই "
"(অনুগ্রহ করে একটি নতুন বুট ফ্লপি তৈরী করুন)"
#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "আপনাকে অবশ্যই %s-ও ফরমেট করতে হবে"
#: install_any.pm:406
#, c-format
msgid "Do you have further supplementary media?"
msgstr "আপনার কি আরও একটি মাধ্যম আছে?"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:409
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"নিম্নলিখিত মিডিয়া পাওয়া যাবে এবং ব্যবহৃত হবে : %s ইনস্টল করার সময়।\n"
"\n"
"\n"
"আপনার কি কন্ফিগার করার জন্য কোন সংযোজিত ইনস্টলেশন মিডিয়া আছে?"
#: install_any.pm:422 printer/printerdrake.pm:3022
#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "সিডি-রম"
#: install_any.pm:422
#, c-format
msgid "Network (http)"
msgstr "নেটওয়ার্ক (http)"
#: install_any.pm:422
#, c-format
msgid "Network (ftp)"
msgstr "নেটওয়ার্ক (ftp)"
#: install_any.pm:451
#, c-format
msgid "Insert the CD 1 again"
msgstr "১ নং সিডিটি আবার প্রবেশ করান"
#: install_any.pm:479 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "কোন ডিভাইস পাওয়া যায় নি"
#: install_any.pm:484
#, c-format
msgid "Insert the CD"
msgstr "সিডিটি প্রবেশ করান"
# সাম
#: install_any.pm:489
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "CD-ROM মাউন্ট প্রক্রিয়া ব্যর্থ হয়েছে"
#: install_any.pm:521 install_any.pm:525
#, c-format
msgid "URL of the mirror?"
msgstr "mirror এর ইউ-আর-এল?"
#: install_any.pm:558
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "এই mirror এ কোন hdlist ফাইল পাওয়া যাচ্ছে না"
#: install_any.pm:725
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"আপনার সিডিরম পরিবর্তন করুন!\n"
"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
"ঠিক আছে চাপুন।"
#: install_any.pm:738
#, c-format
msgid "Copying in progress"
msgstr "কপি সম্পন্ন হচ্ছে"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:878
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"আপনি নিম্মলিখিত সার্ভার(গুলো) বেছে নিয়েছেন: %s\n"
"\n"
"\n"
"এই সার্ভারগুলো ডিফল্টভাবেই চালু করা থাকে। তাদের কোন নিরাপত্তা সমস্যা\n"
"নেই, কিন্তু নতুন কিছুর ক্ষেত্রে তার প্রয়োজন আছে। সেক্ষেত্রে আপনি অবশ্যই সেগুলোকে\n"
"যত তাড়াতাড়ি সম্ভব আপগ্রেড করার ক্ষেত্রে নিশ্চিত হোন।\n"
"\n"
"\n"
"আপনি কি আসলেই এই সার্ভারগুলো ইনস্টল করতে চান?\n"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:901
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"আপনার সিস্টেম আপগ্রেড করার ক্ষেত্রে নিম্নলিখিত প্যাকেজগুলো মুছে যাবে: %s\n"
"\n"
"\n"
"আপনি কি আসলেই এই প্যাকেজগুলো মুছে ফেলতে চান?\n"
#: install_any.pm:1349 partition_table.pm:603
#, c-format
msgid "Error reading file %s"
msgstr "%s ফাইল পড়াতে ত্রুটি"
# সাম
#: install_any.pm:1559
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "নিম্নলিখিত ডিস্কগুলো নামান্তর করা হয়েছে:"
# সাম
#: install_any.pm:1561
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (পূর্বের নাম %s)"
#: install_any.pm:1599
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"একটি ভুল হয়ে গেছে - কোন সঠিক যন্ত্র পাওয়া যায়নি যেখানে নতুন ফাইল সিস্টেম তৈরি করা "
"হবে। অনুগ্রহ করে এই সমস্যার কারণের জন্য আপনার হার্ডওয়্যার পরীক্ষা করুন"
#: install_any.pm:1643
#, c-format
msgid "HTTP"
msgstr "এইচ-টি-টি-পি"
#: install_any.pm:1643
#, c-format
msgid "FTP"
msgstr "এফ-টি-পি"
# সাম
#: install_any.pm:1643
#, c-format
msgid "NFS"
msgstr "NFS"
# সাম
#: install_any.pm:1666
#, c-format
msgid "Please choose a media"
msgstr "অনুগ্রহ করে একটি মিডিয়া নির্বাচন করুন"
# সাম
#: install_any.pm:1698
#, c-format
msgid "Bad media %s"
msgstr "অগ্রহণযোগ্য মিডিয়া %s"
#: install_any.pm:1710
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "এই ফাইলটি আগে থেকেই আছে। করব?"
#: install_any.pm:1761
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "পার্টিশন করার আগে স্ক্রিনশট তৈরী করা যায়নি"
#: install_any.pm:1768
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "%s -এ ইনস্টল করার পরে স্ক্রিনশট পাওয়া যাবে"
#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "সিস্টেম ইনস্টলেশন"
#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "সিস্টেম কনফিগারেশন"
#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"আপনার কম্পিউটারের কিছু হার্ডওয়্যার কাজ করার জন্য ``মালিকানার'' ড্রাইভার প্রয়োজন।\n"
"আপনি তাদের সম্পর্কে এখান থেকে তথ্য নিতে পারবেন: %s"
#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"আপনার অবশ্যই একটি root পার্টিশন থাকতে হবে।\n"
"সেকারণে, একটি পার্টিশন তৈরি করুন (অথবা ইতিমধ্যেই তৈরি একটিতে ক্লিক করুন)।\n"
"তারপর ``Mount point'' বেছে নিন এবং সেটাকে `/' তে সেট করুন"
#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"আপনার কোন swap পার্টিশন নেই\n"
"\n"
"তবুও আগাবো?"
#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "আপনার /boot/efi -এ অবশ্যই একটি FAT পার্টিশন থাকতে হবে"
#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "নতুন পার্টিশন তৈরী করার জন্য যথেষ্ট পরিমান খালি জায়গা নেই"
#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "আগের পার্টিশনগুলি ব্যবহার করো"
#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ব্যবহারের জন্য এখানে উপস্থিত কোন পার্টিশন নেই"
#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "লুপ ব্যাকের জন্য উইন্ডোজের পার্টিশন ব্যবহার করো"
#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Linux4Win-এর জন্য আপনি কোন পার্টিশন ব্যবহার করতে চান?"
#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "সাইজ পছন্দ করো"
#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "মেগাবাইটে রুট পার্টিশনের সাইজ:"
#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "মেগাবাইটে সোয়াপ পার্টিশনের সাইজ:"
#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "লুপব্যাকে ব্যবহারের জন্য কেন FAT পার্টিশন নেই (অথবা পর্যাপ্ত জায়গা নেই)"
#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "আপনি কোন পার্টিশন রি-সাইজ করতে চান?"
#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT আকার পরিবর্তক আপনার পার্টিশন হস্তক্ষেপ করতে পারেনি, \n"
"নিম্নের এই সমস্যাগুলো হয়েছে: %s"
#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "আপনার উইন্ডোজের পার্টিশনের সাইজ হিসেব করা হচ্ছে"
#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"আপনার উইন্ডোজের পার্টিশনটি প্রচন্ড অসম। অনুগ্রহ করে আপনার কম্পিউটারটি উইন্ডোজে রি-বুট "
"করে, ``defrag'' ইউটিলিটি চালান, পরে রি-ষ্টার্ট করে আবার মেনড্রক ইনস্টলেশন চালান।"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"সতর্ক বানী!\n"
"\n"
"DrakX এখন আপনার উইন্ডোজের পার্টিশন আকার পরিবর্তন করবে। খুবই সাবধান: এই\n"
"কার্যক্রমটি বিপদজ্জনক। আপনি যদি এরকম আগে করে না থাকেন, তাহলে আপনাকে\n"
"ইনস্টলেশন থেকে বের হয়ে, উইন্ডোজের কমান্ডপ্রমপ্ট থেকে \"chkdsk c:\" চালাতে হবে\n"
"(লক্ষ্য রাখবেন, \"scandisk\"-এর মত গ্রাফিক্যাল প্রোগ্রামগুলি যথেষ্ট নয়, আপনাকে\n"
"অবশ্যই কমান্ডপ্রমপ্ট থেকে \"chkdsk\" চালাতে হবে), ঐচ্ছিকভাবে defrag চালাতে\n"
"পরেন, পরে ইনস্টলেশন পুনরায় শুরু করবেন। আপনকে আপনার ডাটা ব্যাকআপ করা\n"
"উচিত্। নিশ্চিত্ হলে ঠিক আছে চাপুন।"
#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "আপনি কোথায় উইন্ডোজের জন্য কোন সাইজটি রাখতে চান"
#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "পার্টিশনসমূহ %s"
#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "উইন্ডোজ পার্টিশন আকার পরিবর্তন করা হচ্ছে"
#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT আকার পরিবর্তন ব্যর্থ হয়েছে: %s"
#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"রি-সাইজ করার জন্য কোন FAT পার্টিশন নেই (অথবা যথেষ্ট পারিমান ফাঁকা জায়গা নেই)"
#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "উইন্ডোজ(TM) মুছে ফেলো"
#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "আপনার একের অধিক হার্ড ড্রাইভ আছে, আপনি কোনটাতে লিনাক্স ইনস্টল করতে চান?"
#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "%s ড্রাইভে উপস্থিত সমস্থ ডাটা এবং পার্টিশন নষ্ট হয়ে যাবে"
#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "fdisk ব্যবহার করো"
#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"এখন আপনি %s-কে পার্টিশন করতে পারেন।\n"
"যখন হয়ে যাবে, তখন `w' চেপে সেভ করতে ভূলবেননা"
#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "আমি ইনস্টল করার জন্য কোন জায়গা পাচ্ছিনা"
#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX পার্টিশন সহায়ক এই সমস্থ সমাধান পেয়েছে:"
#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "পার্টিশনে ব্যার্থ: %s"
#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "নেটওয়ার্ককে চালু করা হচ্ছে"
#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "নেটওয়ার্ককে বন্ধ করা হচ্ছে"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandriva Linux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A. \n"
msgstr ""
#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"সাবধান: বিনামূল্যের সফ্টওয়্যার পেটেন্ট মুক্ত হওয়ার প্রয়োজন নেই, এবং কিছু বিনামূল্যের\n"
"সফ্টওয়্যার আপনার দেশ কর্তৃক পেটেন্টকৃত হতে পারে। উদাহরণস্বরুপ, অতিরিক্ত ব্যবহারের\n"
"জন্য MP3 decoder একটি লাইসেন্স যুক্ত থাকে (বিস্তারিত জানার জন্য দেখুন\n"
"http://www.mp3licensing.com । আপনি যদি অনিশ্চিত হোন যদি এর যেকোন\n"
"একটি আপনার জন্যও প্রযোজ্য হতে পারে, আপনার স্থানীয় আইন পরীক্ষা করুন।"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer, duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"অভিনন্দন, ইনস্টলেশন পুরোপুরিভাবে হয়ে গেছে।\n"
"দ্নবুট মিডিয়া সরিয়ে ফেলুন, এবং পুনরায় চালু করার জন্য return চাপুন।\n"
"\n"
"\n"
"এই সংস্করণের ম্যান্ড্রিব লিনাক্সের তথ্য এখানে পাওয়া যাচ্ছে,\n"
"কোন প্রকার সমস্যার সমাধান এখানে পাওয়া যাচ্ছে:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"আপনার সিস্টেম কন্ফিগার করার তথ্য অফিসিয়াল ম্যান্ড্রিব লিনাক্স ব্যবহারকারীর গাইডের\n"
"ইনস্টল হবার পরের অধ্যায়ে পাওয়া যাবে।"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrivalinux.com/en/errata.php3"
msgstr "http://www.mandrivalinux.com/en/errata.php3"
#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr "%s নকল মাউন্ট পয়েন্ট"
#: install_steps.pm:479
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"কিছু গুরুত্বপূর্ণ প্যাকেজ সঠিকভাবে ইনস্টল হয়নি।\n"
"হয় আপনার সিডিরম ড্রাইভ অথবা আপনার সিডিরম ত্রুটিপূর্ণ।\n"
"কোন ইনস্টল কম্পিউটারে \"rpm -qpl media/main/*.rpm\" কমান্ডের মাধ্যমে সিডিরম "
"পরীক্ষাকরুন\n"
#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "`%s' স্টেপে প্রবেশ করছি\n"
#: install_steps_gtk.pm:176
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrivalinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "প্যাকেজ গ্রুপ নির্বাচন"
#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "মোট সাইজ: %d / %d এমবি"
#: install_steps_gtk.pm:294
#, c-format
msgid "Bad package"
msgstr "বাজে প্যাকেজ"
#: install_steps_gtk.pm:296
#, c-format
msgid "Version: "
msgstr "ভার্সন:"
#: install_steps_gtk.pm:297
#, c-format
msgid "Size: "
msgstr "সাইজ:"
#: install_steps_gtk.pm:297
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"
#: install_steps_gtk.pm:298
#, c-format
msgid "Importance: "
msgstr "প্রাধান্য:"
#: install_steps_gtk.pm:331
#, c-format
msgid "You can not select/unselect this package"
msgstr "আপনি এই প্যাকেজটি নির্বাচন/অ-নির্বাচন করতে পারবেন না"
#: install_steps_gtk.pm:335
#, c-format
msgid "due to missing %s"
msgstr "%s না থাকার কারনে"
#: install_steps_gtk.pm:336
#, c-format
msgid "due to unsatisfied %s"
msgstr "%s যথেষ্ট না হবার কারনে"
#: install_steps_gtk.pm:337
#, c-format
msgid "trying to promote %s"
msgstr "%s প্রচারের চেষ্টা চলছে"
#: install_steps_gtk.pm:338
#, c-format
msgid "in order to keep %s"
msgstr "%s রাখার কারণে"
#: install_steps_gtk.pm:343
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"আপনি এই প্যাকেজটি নির্বাচন করতে পারবেননা যেহেতু এটা ইনস্টল করার জন্য যথেষ্ট জায়গা "
"ফাঁকা নেই"
#: install_steps_gtk.pm:346
#, c-format
msgid "The following packages are going to be installed"
msgstr "এই প্যাকেজগুলি ইনস্টল হতে যাচ্ছে"
#: install_steps_gtk.pm:347
#, c-format
msgid "The following packages are going to be removed"
msgstr "এই প্যাকেজগুলি অপসরিত হতে যাচ্ছে"
#: install_steps_gtk.pm:371
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "এটি একটি বাধ্যতামূলাক প্যাকেজ, এটি কোনভাবেই বাদ দেয়া যাবেনা"
#: install_steps_gtk.pm:373
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr ""
"আপনি এই প্যাকেজটির অ-নির্বাচন করতে পারবেন না, এটা আগে থেকেই ইনস্টল হয়ে আছে"
#: install_steps_gtk.pm:376
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"এই প্যাকেজটি অবশ্যই আপগ্রেড করতে হবে।\n"
"আপনি কি নিশ্চিত্ এটা অ-নির্বাচন করতে চান?"
#: install_steps_gtk.pm:379
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "আপনি এই প্যাকেজটি অ-নির্বাচন করতে পারবেন না। এটা অবশ্যই আপগ্রেড হতে হবে"
#: install_steps_gtk.pm:384
#, c-format
msgid "Show automatically selected packages"
msgstr "সংয়-নির্বাচিত প্যাকেজগুলি দেখাও"
# সাম
#: install_steps_gtk.pm:389
#, c-format
msgid "Load/Save selection"
msgstr "নির্বাচনসমূহ লোড/সংরক্ষণ করো"
#: install_steps_gtk.pm:390
#, c-format
msgid "Updating package selection"
msgstr "প্যাকেজের নির্বাচন আপগ্রেড করা হচ্ছে"
#: install_steps_gtk.pm:395
#, c-format
msgid "Minimal install"
msgstr "সর্বনিম্ন ইনস্টল"
#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
#, c-format
msgid "Choose the packages you want to install"
msgstr "আপনি যেই প্যাকেজগুলি ইনস্টল করতে চান তা পছন্দ করুন"
#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
#, c-format
msgid "Installing"
msgstr "ইনস্টলেশন"
#: install_steps_gtk.pm:432
#, c-format
msgid "Estimating"
msgstr "নির্ধারণ চলছে"
#: install_steps_gtk.pm:481
#, c-format
msgid "No details"
msgstr "কোন বিস্তারিত ছাড়া"
#: install_steps_gtk.pm:489
#, c-format
msgid "Time remaining "
msgstr "সময় বাকী আছে"
#: install_steps_gtk.pm:496
#, c-format
msgid "Please wait, preparing installation..."
msgstr "ইনস্টলেশনের প্রস্তুতি চলছে, অনুগ্রহ করে অপেক্ষা করুন..."
#: install_steps_gtk.pm:511
#, c-format
msgid "%d packages"
msgstr "%d প্যাকেজ সমূহ"
#: install_steps_gtk.pm:516
#, c-format
msgid "Installing package %s"
msgstr "%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে"
#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731
#, c-format
msgid "Refuse"
msgstr "অস্বীকার"
#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"আপনার সিডিরম পরিবর্তন করুন!\n"
"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
"ঠিক আছে চাপুন।\n"
"যদি সেটা আপনার না থাকে, এই সিডিরম থেকে ইনস্টলেশন এড়িয়ে যেতে বাতিল চাপুন।"
#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
#, c-format
msgid "There was an error ordering packages:"
msgstr "প্যাকেজগুলো বিন্যস্ত করতে গিয়ে একটি ভুল ছিল:"
#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
#, c-format
msgid "Go on anyway?"
msgstr "তবুও যাব?"
#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
#, c-format
msgid "There was an error installing packages:"
msgstr "এই প্যাকেজগুলি ইনস্টল করতে সমস্যা হয়েছে:"
#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
#: install_steps_interactive.pm:1073
#, c-format
msgid "not configured"
msgstr "কনফিগার করা হয়নি"
#: install_steps_gtk.pm:679
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"নিম্নলিখিত ইনস্টলেশন মিডিয়া পাওয়া গেছে।\n"
"যদি আপনি এগুলোর মধ্যকার কিছু এড়িয়ে যেতে চান, তাহলে এখন সেগুলোকে অনির্বাচিত করুন।"
# সাম
#: install_steps_gtk.pm:688
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""
"ইনস্টলেশনের আগে আপনি সিডির তথ্যসমূহ হার্ডডিস্কে কপি করতে পারেন।\n"
" এরপর হার্ডডিস্ক থেকে ইনস্টলেশন চলতে থাকবে এবং সিস্টেম সম্পূর্ন ইনস্টলেশনের পরও "
"প্যাকেজগুলো রয়ে যাবে।"
# সাম
#: install_steps_gtk.pm:690
#, c-format
msgid "Copy whole CDs"
msgstr "CD গুলো সম্পুর্ন কপি করো "
#: install_steps_interactive.pm:85
#, c-format
msgid "License agreement"
msgstr "লাইসেন্স এগ্রিমেন্ট"
#: install_steps_interactive.pm:89
#, c-format
msgid "Release Notes"
msgstr "সংস্করণ মন্তব্য"
#: install_steps_interactive.pm:119
#, c-format
msgid "Please choose your keyboard layout."
msgstr "অনুগ্রহ করে আপনার কীবোর্ড বিন্যাস পছন্দ করুন।"
#: install_steps_interactive.pm:121
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "এখানে উপস্থিত সমস্ত কীবোর্ডের তালিকা রয়োছে"
#: install_steps_interactive.pm:151
#, c-format
msgid "Install/Upgrade"
msgstr "ইনস্টল/আপগ্রড"
#: install_steps_interactive.pm:152
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "এটা কি একটি ইনস্টলেশন না আপগ্রেড?"
#: install_steps_interactive.pm:158
#, c-format
msgid "Upgrade %s"
msgstr "%s আপগ্রড করো"
#: install_steps_interactive.pm:168
#, c-format
msgid "Encryption key for %s"
msgstr "%s -এর জন্য এনক্রিপশন কী"
#: install_steps_interactive.pm:185
#, c-format
msgid "Please choose your type of mouse."
msgstr "আপনার মাউসের ধরণ পছন্দ করুন"
#: install_steps_interactive.pm:194 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "মাউস পোর্ট"
#: install_steps_interactive.pm:195 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "অনুগ্রহ করে আপনার মাউসটি যে সিরিয়াল পোর্টের সাথে সংযুক্ত আছে তা পছন্দ করুন।"
#: install_steps_interactive.pm:205
#, c-format
msgid "Buttons emulation"
msgstr "মাউসের বাটনগুলোর অনুকরণ"
#: install_steps_interactive.pm:207
#, c-format
msgid "Button 2 Emulation"
msgstr "২ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"
#: install_steps_interactive.pm:208
#, c-format
msgid "Button 3 Emulation"
msgstr "৩ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"
#: install_steps_interactive.pm:229
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"
#: install_steps_interactive.pm:229
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIA কার্ডগুলি কনফিগার করা হচ্ছে..."
#: install_steps_interactive.pm:236
#, c-format
msgid "IDE"
msgstr "IDE"
#: install_steps_interactive.pm:236
#, c-format
msgid "Configuring IDE"
msgstr "IDE কনফিগারেশন চলছে"
#: install_steps_interactive.pm:256 network/tools.pm:181
#, c-format
msgid "No partition available"
msgstr "কোন পার্টিশন বরাদ্দ নেই"
#: install_steps_interactive.pm:259
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "মাউন্ট পয়েন্ট খোঁজার জন্য পার্টিশনগুলি স্কেন করা হচ্ছে"
#: install_steps_interactive.pm:266
#, c-format
msgid "Choose the mount points"
msgstr "মাউন্ট পয়েন্টগুলি পছন্দ করুন"
#: install_steps_interactive.pm:312
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"১ মেগাবাইটের bootstrap এর জন্য খালি জায়গা নেই! ইনস্টল অগ্রসর হবে, কিন্তু আপনার "
"সিস্টেম বুট করার জন্য, আপনাকে DiskDrake থেকে bootstrap পার্টিশন তৈরী করতে হবে"
# সাম: bootstrap = বুটস্ট্র্যাপ?
#: install_steps_interactive.pm:317
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""
"আপনাকে একটি PPC PReP Boot বুটস্ট্র্যাপ তৈরী করতে হবে! ইনস্টলেশন অগ্রসর হবে, তবে "
"আপনার সিস্টেম বুট করার জন্য, DiskDrake এর বুটস্ট্র্যাপ পার্টিশনটি প্রয়োজন"
#: install_steps_interactive.pm:353
#, c-format
msgid "Choose the partitions you want to format"
msgstr "ফরমেট করার জন্য পার্টিশনটি পছন্দ করুন"
#: install_steps_interactive.pm:355
#, c-format
msgid "Check bad blocks?"
msgstr "খারাপ ব্লক চেক করব?"
#: install_steps_interactive.pm:383
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"%s ফাইল সিস্টেম পরীক্ষা করতে ব্যার্থ হয়েছে। আপনি কি এই ত্রুটিগুলি সারাতে চান? (মনে "
"রাখবেন যে আপনি ডাটা হারাতে পারেন)"
#: install_steps_interactive.pm:386
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "ইনস্টলেশন সম্পূর্ন হবার জন্য যথেষ্ট swap জায়গা নেই, অনুগ্রহ করে কিছু যোগ করুন"
#: install_steps_interactive.pm:393
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "উপস্থিত প্যাকেজসমুহ পর্যবেক্ষন করে আবার RMP ডাটাবেইজ তৈরী করা হচ্ছে..."
#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
#, c-format
msgid "Looking for available packages..."
msgstr "বরাদ্দকৃত প্যাকেজসমূহ খোঁজা হচ্ছে..."
#: install_steps_interactive.pm:397
#, c-format
msgid "Looking at packages already installed..."
msgstr "যে সমস্থ প্যাকেজ ইনস্টল হয়ে আছে সেগুলি পর্যবেক্ষন করা হচ্ছে..."
#: install_steps_interactive.pm:401
#, c-format
msgid "Finding packages to upgrade..."
msgstr "আপগ্রেড করার জন্য প্যাকেজ খোঁজা হচ্ছে..."
#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "আপনি একটি মিরর পছন্দ করুন যেখান থেকে প্যাকেজগুলি নেবেন"
#: install_steps_interactive.pm:461
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"আপনার সিস্টেমর (%d > %d) ইনস্টল বা আপগ্রেড করার জন্য যথেষ্ট পরিমান জায়গা নেই"
# সাম
#: install_steps_interactive.pm:495
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"অনুগ্রহ করে প্যাকেজ নির্বাচন লোড বা সংরক্ষণ বাছাই করুন।\n"
"এই ফরম্যাটটি auto_install দ্বারা তৈরী ফাইলসমূহের মত।"
#: install_steps_interactive.pm:497
#, c-format
msgid "Load"
msgstr "চাপ"
#: install_steps_interactive.pm:497 standalone/drakbackup:3916
#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
#, c-format
msgid "Save"
msgstr "সংরক্ষণ"
# সাম:
# bad has been translated in many ways... নষ্ট, বাজে, খারাপ... please clarify
#: install_steps_interactive.pm:505
#, c-format
msgid "Bad file"
msgstr "অগ্রহণযোগ্য ফাইল"
#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr "উপস্থিত জায়গার চাইতে নির্বাচিত সাইজটি অনেক বড়"
#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr "ইনস্টলের ধরণ"
#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"আপনি প্যাকেজের কোন গ্রুপ নির্বাচন করেননি।\n"
"অনুগ্রহ করে আপনি যে ক্ষুদ্রাকৃতির ইনস্টলেশন চান তা পছন্দ করুন:"
#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "সাধারন নির্দেশিকার সাথে (পরামর্শ দেয়া হচ্ছে!)"
#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "এক্কেবারেই ক্ষুদ্র ইনস্টলেশন (বিশেষ করে কোন urpmi ছাড়া)"
#: install_steps_interactive.pm:641 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "সকল"
#: install_steps_interactive.pm:680
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"নিচের লিষ্টের সব সিডিগুলি আপনার থাকেল, ঠিক আছে ক্লিক্ করুন।\n"
"এগুলির কোনটিই যদি না থাকে তাহলে, বাতিল ক্লিক্ করুন।\n"
"যদি কিছু সিডি না থাকে, তাহলে সেগুলি অনির্বাচিত করে ঠিক আছে ক্লিক্ করুন।"
#: install_steps_interactive.pm:685
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "\"%s\" লেভেলের সিডি-রম"
#: install_steps_interactive.pm:706
#, c-format
msgid "Preparing installation"
msgstr "ইনস্টলেশনের প্রস্তুতি চলছে"
#: install_steps_interactive.pm:715
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে\n"
"%d%%"
#: install_steps_interactive.pm:764
#, c-format
msgid "Post-install configuration"
msgstr "ইনস্টলের পরের কনফিগারেশন"
#: install_steps_interactive.pm:771
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""
#: install_steps_interactive.pm:800
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"আপনি এখন আপডেট প্যাকেজ ডাউনলোড করতে পারবেন। এই প্যাকেজগুলো\n"
"এই ডিস্ট্রিবিউশন রিলিজ হবার পর আপডেট করতে পারেন। তারা নিরাপত্তা\n"
"বা ত্রুটি নির্দিষ্ট ধারণ করতে পারে।\n"
"\n"
"এই প্যাকেজগুলো ডাউনলোড করতে, আপনার ইন্টারনেট সংযুক্তিতে কাজ করতে\n"
"হবে।\n"
"\n"
"আপনি কি ইনস্টল আপডেট করতে চান?"
#: install_steps_interactive.pm:821
#, c-format
msgid ""
"Contacting Mandrivalinux web site to get the list of available mirrors..."
msgstr ""
#: install_steps_interactive.pm:840
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "প্যাকেজের তালিকার জন্য মিররের সাথে সংযুক্ত করা হচ্ছে..."
#: install_steps_interactive.pm:844
#, c-format
msgid "Unable to contact mirror %s"
msgstr "%s মিররের সাথে সংযুক্ত হওয়া গেলনা"
#: install_steps_interactive.pm:844
#, c-format
msgid "Would you like to try again?"
msgstr "আপনি কি আবার চেষ্টা করতে চান?"
#: install_steps_interactive.pm:870 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "আপনার টাইমজোন কি?"
#: install_steps_interactive.pm:875
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "সয়ংক্রিয়ভাবে সময় মেলাও (NTP ব্যবহার করে)"
#: install_steps_interactive.pm:883
#, c-format
msgid "NTP Server"
msgstr "NTP সার্ভার"
#: install_steps_interactive.pm:925 steps.pm:30
#, c-format
msgid "Summary"
msgstr "সারাংশ"
#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
#: install_steps_interactive.pm:1125 services.pm:133
#: standalone/drakbackup:1571
#, c-format
msgid "System"
msgstr "সি"
#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
#: install_steps_interactive.pm:1049
#, c-format
msgid "Hardware"
msgstr "হার্ডওয়্যার"
#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
#, c-format
msgid "Remote CUPS server"
msgstr "দূরবর্তী CUPS সার্ভার"
#: install_steps_interactive.pm:984
#, c-format
msgid "No printer"
msgstr "কোন প্রিন্টার নেই"
#: install_steps_interactive.pm:1026
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "আপনার কি একটি ISA সাউন্ড কার্ড আছে?"
#: install_steps_interactive.pm:1028
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"ইনস্টল শেষ হবার পরে সাউন্ড কার্ড কনফিগার করার জন্য \"alsaconf\" অথবা \"sndconfig"
"\" চালাও"
#: install_steps_interactive.pm:1030
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "কোন সাউন্ডকার্ড সনাক্ত হয়নি, ইনস্টলের পরে \"harddrake\" দিয়ে চেষ্টা করুন"
#: install_steps_interactive.pm:1050
#, c-format
msgid "Graphical interface"
msgstr "গ্রাফিকাল ইন্টারফেস"
#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
#, c-format
msgid "Network & Internet"
msgstr "নেটওয়ার্ট এবং ইন্টারনেট"
#: install_steps_interactive.pm:1073
#, c-format
msgid "configured"
msgstr "কনফিগার করা হয়েছে"
#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "সিকিউরিটি"
#: install_steps_interactive.pm:1101
#, c-format
msgid "activated"
msgstr "সক্রিয় হয়েছে"
#: install_steps_interactive.pm:1101
#, c-format
msgid "disabled"
msgstr "অকার্যকর করা হয়েছে"
#: install_steps_interactive.pm:1112
#, c-format
msgid "Boot"
msgstr "বুট"
# -PO: example: lilo-graphic on /dev/hda1
#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1116
#, c-format
msgid "%s on %s"
msgstr "%s -এ %s"
#: install_steps_interactive.pm:1130 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "সার্ভিস সমূহ: %d সক্রিয় হয়েছে %d রেজিষ্টারের জন্য"
#: install_steps_interactive.pm:1140
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "আপনি X কনফিগার করেননি। আপনি কি নিশ্চিত এরকমটি চান?"
#: install_steps_interactive.pm:1220
#, c-format
msgid "Preparing bootloader..."
msgstr "Bootloader প্রস্তুত করা হচ্ছে..."
#: install_steps_interactive.pm:1230
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""
"আপনার মেশিনটি মনে হচ্ছে একটি Oldworld বা অজানা মেশিন, yaboot বুটলোডারটি আপনার "
"জন্য কাজ করবে না। ইনস্টল এগিয়ে যাবে, কিন্তু আপনার মেশিনকে বুট করার জন্য আপনাকে "
"BootX বা অন্য কোন কিছু ব্যবহার করতে হবে। root fs এর জন্য কার্নেল প্রেরিত মান হবে: "
"root=%s"
#: install_steps_interactive.pm:1236
#, c-format
msgid "Do you want to use aboot?"
msgstr "আপনি কি aboot ব্যবহার করতে চান?"
#: install_steps_interactive.pm:1239
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Aboot ইনস্টলে ব্যর্থ হয়েছে,\n"
"জোর করে ইনস্টলের চেষ্টা করবো যদিও সেটা প্রথম পার্টিশনকে নষ্ট করতে পারে?"
#: install_steps_interactive.pm:1260
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"এই নিরাপত্তা লেভেলে, উইন্ডোজ পার্টিশনের ফাইলে প্রবেশ শুধুমাত্র অ্যাডমিনিস্ট্রেটরের আছে।"
#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "%s ড্রাইভে একটি ফাঁকা ফ্লপি ঢোকান"
#: install_steps_interactive.pm:1294
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "ড্রাইভারের ডিস্কের জন্য অন্য একটি ফ্লপি ঢোকান"
#: install_steps_interactive.pm:1296
#, c-format
msgid "Creating auto install floppy..."
msgstr "সয়ং ইনস্টল ফ্লপি তৈরী করা হচ্ছে..."
#: install_steps_interactive.pm:1308
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"কিছু ধাপ সম্পূর্ন করা যায়নি।\n"
"\n"
"আপনি কি এখন বের হতে চান?"
#: install_steps_interactive.pm:1324
#, c-format
msgid "Generate auto install floppy"
msgstr "সয়ংক্রিয় ইনস্টল ফ্লপি প্রস্তুত করো"
#: install_steps_interactive.pm:1326
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
|