# translation of zh_TW.po to 正體中文 # translation of zh_TW.po to Chinese Traditional # translation of DrakX-zh_TW.po to Chinese Traditional # drakbootdisk messages in Traditional Chinese # Copyright (C) 2000, 2003, 2004 Free Software Foundation, Inc. # Platin <platin@cle.linux.org.tw> , 2000 # Kenduest Lee <kenduest@i18n.linux.org.tw> , 2002 # Danny Zeng <danny@zeng.com.cn>, 2000. # Joe Man <trmetal@yahoo.com.hk>, 2001. # Chong Sein Yeo <csyeo@hal-pc.org>, 2003. # Hilbert <freehil@yahoo.com>, 2003, 2004. # Hilbert <h@mandrake.org>, 2004. # hilbert <h@mandrake.org>, 2004. # Shiva Huang <blueshiva@giga.net.tw>, 2005. # Shiva Huang <shivahuang@gmail.com>, 2005-2006, 2008 # You-Cheng Hsieh <yochenhsieh@xuite.net>, 2005-2006, 2008. # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2008-09-10 18:04+0200\n" "PO-Revision-Date: 2008-03-12 22:25+0800\n" "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n" "Language-Team: Traditional Chinese <zh@li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.3.1\n" "X-Poedit-Language: Chinese\n" "X-Poedit-Country: TAIWAN\n" #: any.pm:252 any.pm:853 diskdrake/interactive.pm:554 #: diskdrake/interactive.pm:741 diskdrake/interactive.pm:785 #: diskdrake/interactive.pm:843 diskdrake/interactive.pm:1133 do_pkgs.pm:221 #: do_pkgs.pm:267 harddrake/sound.pm:285 interactive.pm:584 pkgs.pm:257 #, c-format msgid "Please wait" msgstr "請稍候" #: any.pm:252 #, c-format msgid "Bootloader installation in progress" msgstr "開機載入程式安裝中" #: any.pm:263 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO 想要分配新的磁區標籤給分割區 %s。但是,改變 Windows NT、2000,\n" "或 XP 開機磁區的磁區標籤會造成致命的 Windows 錯誤。\n" "這個警告並不適用於 Windows 95、98,或 NT 的資料磁區。\n" "\n" "要分配一個新的磁區標籤?" #: any.pm:274 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "開機程式安裝失敗,發生如下之錯誤:" #: any.pm:280 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "您也許需要改變您的 Open Firmware 上面的開機裝置設定,\n" "以便於開啟開機啟動程式的功能。如果您開機時並沒有看到\n" "開機程式的任何訊息,請於重新開機時按住 Command-Option-O-F,\n" "然後輸入:setenv boot-device %s,\\\\:tbxi\n" "然後再輸入:shut-down\n" "然後您下一次開機時應該就可以看到開機啟動程式的訊息了。" #: any.pm:320 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "您決定要將開機載入程式安裝於分割區上面。\n" "這表示您已經有一個開機載入程式在您開機的硬碟上\n" "(例如:System Commander)。\n" "\n" "您目前是用那顆硬碟開機呢?" #: any.pm:346 #, fuzzy, c-format msgid "First sector (MBR) of drive %s" msgstr "硬碟的第一個扇區 (MBR)" #: any.pm:348 #, c-format msgid "First sector of drive (MBR)" msgstr "硬碟的第一個扇區 (MBR)" #: any.pm:350 #, c-format msgid "First sector of the root partition" msgstr "根分割區的第一扇區" #: any.pm:352 #, c-format msgid "On Floppy" msgstr "在軟碟機" #: any.pm:354 #, c-format msgid "Skip" msgstr "略過" #: any.pm:358 #, fuzzy, c-format msgid "Bootloader Installation" msgstr "開機載入程式安裝中" #: any.pm:362 #, c-format msgid "Where do you want to install the bootloader?" msgstr "您要將開機載入程式安裝在那裡?" #: any.pm:386 #, c-format msgid "Boot Style Configuration" msgstr "開機樣式組態設定" #: any.pm:396 any.pm:427 any.pm:428 #, c-format msgid "Bootloader main options" msgstr "開機載入程式主要選項" #: any.pm:400 #, c-format msgid "Bootloader" msgstr "開機載入器" #: any.pm:401 any.pm:431 #, c-format msgid "Bootloader to use" msgstr "要用的開機載入程式" #: any.pm:403 any.pm:433 #, c-format msgid "Boot device" msgstr "開機裝置" #: any.pm:405 #, c-format msgid "Main options" msgstr "主要選項" #: any.pm:406 #, c-format msgid "Delay before booting default image" msgstr "以預設的核心影像開機之前等待的時間" #: any.pm:407 #, c-format msgid "Enable ACPI" msgstr "啟用 ACPI" #: any.pm:408 #, c-format msgid "Enable APIC" msgstr "啟用 APIC" #: any.pm:409 #, c-format msgid "Enable Local APIC" msgstr "啟用本地 APIC" #: any.pm:411 any.pm:797 any.pm:812 authentication.pm:239 #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Password" msgstr "密碼" #: any.pm:413 authentication.pm:250 #, c-format msgid "The passwords do not match" msgstr "密碼不符合" #: any.pm:413 authentication.pm:250 diskdrake/interactive.pm:1300 #, c-format msgid "Please try again" msgstr "請再試一次" #: any.pm:414 #, c-format msgid "You can not use a password with %s" msgstr "您不能使用 %s 作為密碼" #: any.pm:417 any.pm:799 any.pm:814 authentication.pm:240 #, c-format msgid "Password (again)" msgstr "密碼 (再一次)" #: any.pm:418 #, c-format msgid "Restrict command line options" msgstr "限制命令列選項" #: any.pm:418 #, c-format msgid "restrict" msgstr "限制" #: any.pm:421 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用" #: any.pm:423 #, c-format msgid "Clean /tmp at each boot" msgstr "每次開機時清理 /tmp" #: any.pm:432 #, c-format msgid "Init Message" msgstr "啟動訊息" #: any.pm:434 #, c-format msgid "Open Firmware Delay" msgstr "Open Firmware 延遲" #: any.pm:435 #, c-format msgid "Kernel Boot Timeout" msgstr "核心啟動時間逾時" #: any.pm:436 #, c-format msgid "Enable CD Boot?" msgstr "允許光碟開機?" #: any.pm:437 #, c-format msgid "Enable OF Boot?" msgstr "允許 Open Firmware 開機?" #: any.pm:438 #, c-format msgid "Default OS?" msgstr "預設的作業系統?" #: any.pm:505 #, c-format msgid "Image" msgstr "核心影像" #: any.pm:506 any.pm:519 #, c-format msgid "Root" msgstr "根目錄" #: any.pm:507 any.pm:532 #, c-format msgid "Append" msgstr "附加參數" #: any.pm:509 #, c-format msgid "Xen append" msgstr "Xen 附加參數" #: any.pm:512 #, c-format msgid "Video mode" msgstr "顯示模式" #: any.pm:514 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:515 #, c-format msgid "Network profile" msgstr "網路 profile" #: any.pm:524 any.pm:529 any.pm:531 diskdrake/interactive.pm:376 #, c-format msgid "Label" msgstr "標籤" #: any.pm:526 any.pm:534 harddrake/v4l.pm:438 #, c-format msgid "Default" msgstr "預設" #: any.pm:533 #, c-format msgid "NoVideo" msgstr "沒有 Video 參數" #: any.pm:544 #, c-format msgid "Empty label not allowed" msgstr "不允許空白標籤" #: any.pm:545 #, c-format msgid "You must specify a kernel image" msgstr "您需要指定一個核心影像" #: any.pm:545 #, c-format msgid "You must specify a root partition" msgstr "您需要指定一個 root 分割區" #: any.pm:546 #, c-format msgid "This label is already used" msgstr "這個標籤已經被用過了" #: any.pm:564 #, c-format msgid "Which type of entry do you want to add?" msgstr "您要新增哪一類的項目?" #: any.pm:565 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:565 #, c-format msgid "Other OS (SunOS...)" msgstr "其他作業系統 (SunOS...)" #: any.pm:566 #, c-format msgid "Other OS (MacOS...)" msgstr "其他作業系統 (MacOS...)" #: any.pm:566 #, c-format msgid "Other OS (Windows...)" msgstr "其他作業系統 (Windows...)" #: any.pm:594 #, fuzzy, c-format msgid "Bootloader Configuration" msgstr "開機樣式組態設定" #: any.pm:595 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "目前有這些選項在您的開機選單中。\n" "您可以建立更多的選項或修改既有的選項。" #: any.pm:758 #, c-format msgid "access to X programs" msgstr "存取 X 程式" #: any.pm:759 #, c-format msgid "access to rpm tools" msgstr "存取 RPM 套件工具程式" #: any.pm:760 #, c-format msgid "allow \"su\"" msgstr "允許 \"su\"" #: any.pm:761 #, c-format msgid "access to administrative files" msgstr "存取系統管理者權限的檔案" #: any.pm:762 #, c-format msgid "access to network tools" msgstr "存取網路工具" #: any.pm:763 #, c-format msgid "access to compilation tools" msgstr "存取編譯工具" #: any.pm:769 #, c-format msgid "(already added %s)" msgstr "( %s 已經加入)" #: any.pm:775 #, c-format msgid "Please give a user name" msgstr "請輸入使用者名稱" #: any.pm:776 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'" #: any.pm:777 #, c-format msgid "The user name is too long" msgstr "這個使用者名稱太長了" #: any.pm:778 #, c-format msgid "This user name has already been added" msgstr "這個使用者已經加入過了" #: any.pm:784 any.pm:816 #, c-format msgid "User ID" msgstr "使用者 ID" #: any.pm:784 any.pm:817 #, c-format msgid "Group ID" msgstr "群組 ID" #: any.pm:785 #, c-format msgid "%s must be a number" msgstr "%s 必須是數字" #: any.pm:786 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "%s 必須大於 500。還是要接受嗎?" #: any.pm:790 #, c-format msgid "User management" msgstr "使用者管理" #: any.pm:796 authentication.pm:226 #, c-format msgid "Set administrator (root) password" msgstr "設定管理者 (root) 密碼" #: any.pm:801 #, c-format msgid "Enter a user" msgstr "輸入一位使用者" #: any.pm:803 #, c-format msgid "Icon" msgstr "圖示" #: any.pm:806 #, c-format msgid "Real name" msgstr "真實名稱" #: any.pm:810 #, c-format msgid "Login name" msgstr "登入名稱" #: any.pm:815 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:848 #, c-format msgid "Please wait, adding media..." msgstr "請稍後,新增媒體中..." #: any.pm:866 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "自動登入" #: any.pm:867 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。" #: any.pm:868 #, c-format msgid "Use this feature" msgstr "使用此功能" #: any.pm:869 #, c-format msgid "Choose the default user:" msgstr "選取預設的使用者:" #: any.pm:870 #, c-format msgid "Choose the window manager to run:" msgstr "選取您想使用的視窗管理程式:" #: any.pm:881 any.pm:899 any.pm:957 #, c-format msgid "Release Notes" msgstr "發行紀錄" #: any.pm:906 any.pm:1250 interactive/gtk.pm:804 #, c-format msgid "Close" msgstr "關閉" #: any.pm:943 #, c-format msgid "License agreement" msgstr "版權協議" #: any.pm:945 diskdrake/dav.pm:26 #, c-format msgid "Quit" msgstr "離開" #: any.pm:952 #, fuzzy, c-format msgid "Do you accept this license ?" msgstr "您還有其他的嗎?" #: any.pm:953 #, c-format msgid "Accept" msgstr "接受" #: any.pm:953 #, c-format msgid "Refuse" msgstr "拒絕" #: any.pm:980 any.pm:1045 #, c-format msgid "Please choose a language to use" msgstr "請選擇要使用那個語言。" #: any.pm:1009 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandriva Linux 能支援多種語言,請選擇您想安裝的語言。\n" "它們將可供您完成安裝並重新啟動系統之後使用。" #: any.pm:1012 #, c-format msgid "Multi languages" msgstr "多語系" #: any.pm:1023 any.pm:1054 #, c-format msgid "Old compatibility (non UTF-8) encoding" msgstr "舊式相容 (非 UTF-8) 編碼" #: any.pm:1025 #, c-format msgid "All languages" msgstr "所有語言" #: any.pm:1046 #, c-format msgid "Language choice" msgstr "語言選擇" #: any.pm:1101 #, c-format msgid "Country / Region" msgstr "國家/地區" #: any.pm:1102 #, c-format msgid "Please choose your country." msgstr "請選擇您的國家。" #: any.pm:1104 #, c-format msgid "Here is the full list of available countries" msgstr "以下是全部可用的所有的國家清單" #: any.pm:1105 #, c-format msgid "Other Countries" msgstr "其他國家" #: any.pm:1105 interactive.pm:484 interactive/gtk.pm:426 #, c-format msgid "Advanced" msgstr "進階" #: any.pm:1111 #, c-format msgid "Input method:" msgstr "輸入法:" #: any.pm:1114 #, c-format msgid "None" msgstr "無" #: any.pm:1195 #, c-format msgid "No sharing" msgstr "不分享" #: any.pm:1195 #, c-format msgid "Allow all users" msgstr "允許所有使用者" #: any.pm:1195 #, c-format msgid "Custom" msgstr "自訂" #: any.pm:1199 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "您要允許使用者能夠分享他們自己的目錄嗎?\n" "若是要開放將允許使用者能在 konqueror 或者是 nautilus 內\n" "點選 \"分享\"\n" "\n" "\"自訂\" 允許每一個使用者自行設定。\n" #: any.pm:1211 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "NFS:傳統的 Unix 檔案分享系統,但 Mac 與 Windows 的支援較不足。" #: any.pm:1214 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "SMB:一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。" #: any.pm:1222 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。" #: any.pm:1250 #, c-format msgid "Launch userdrake" msgstr "啟動 userdrake" #: any.pm:1252 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "每個使用者的分享都是使用 \"fileshare\" 群組。\n" "您可以執行 userdrake 在該群組內加入使用者。" #: any.pm:1344 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X" #: any.pm:1348 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "您必須登出之後重新登入才能讓變動生效" #: any.pm:1383 #, c-format msgid "Timezone" msgstr "時區" #: any.pm:1383 #, c-format msgid "Which is your timezone?" msgstr "您的時區為何?" #: any.pm:1406 any.pm:1408 #, c-format msgid "Date, Clock & Time Zone Settings" msgstr "日期、時間與時區設定" #: any.pm:1409 #, c-format msgid "What is the best time?" msgstr "最佳的時間是哪一個?" #: any.pm:1413 #, c-format msgid "%s (hardware clock set to UTC)" msgstr "%s (硬體時鐘設定為 UTC 時間)" #: any.pm:1414 #, c-format msgid "%s (hardware clock set to local time)" msgstr "%s (硬體時鐘設定為本地時間)" #: any.pm:1416 #, c-format msgid "NTP Server" msgstr "NTP 伺服器" #: any.pm:1417 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "自動時間同步 (使用 NTP 服務)" #: authentication.pm:25 #, c-format msgid "Local file" msgstr "本地端檔案" #: authentication.pm:26 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:27 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:28 #, c-format msgid "Smart Card" msgstr "智慧卡" #: authentication.pm:29 authentication.pm:205 #, c-format msgid "Windows Domain" msgstr "Windows 網域" #: authentication.pm:30 #, c-format msgid "Kerberos 5" msgstr "" #: authentication.pm:64 #, c-format msgid "Local file:" msgstr "本地端檔案:" #: authentication.pm:64 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:65 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:65 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:66 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:66 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "讓您在同一個網路資訊服務網域內的一群電腦中使用共通的密碼與群阻擋案。" #: authentication.pm:67 #, c-format msgid "Windows Domain:" msgstr "Windows 網域:" #: authentication.pm:67 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:68 #, c-format msgid "Kerberos 5 :" msgstr "" #: authentication.pm:68 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "使用 Kerberos 與 LDAP 來在 Active Directory 伺服器上進行認證" #: authentication.pm:96 authentication.pm:130 authentication.pm:149 #: authentication.pm:150 authentication.pm:176 authentication.pm:200 #: authentication.pm:878 #, c-format msgid " " msgstr "" #: authentication.pm:97 authentication.pm:131 authentication.pm:177 #: authentication.pm:201 #, fuzzy, c-format msgid "Welcome to the Authentication Wizard" msgstr "需要 Domain 認證" #: authentication.pm:99 #, c-format msgid "" "You have selected LDAP authentication. Please review the configuration " "options below " msgstr "" #: authentication.pm:101 authentication.pm:156 #, c-format msgid "LDAP Server" msgstr "LDAP 伺服器" #: authentication.pm:102 authentication.pm:157 #, c-format msgid "Base dn" msgstr "" #: authentication.pm:103 #, c-format msgid "Fetch base Dn " msgstr "" #: authentication.pm:105 authentication.pm:160 #, c-format msgid "Use encrypt connection with TLS " msgstr "" #: authentication.pm:106 authentication.pm:161 #, c-format msgid "Download CA Certificate " msgstr "" #: authentication.pm:108 authentication.pm:141 #, c-format msgid "Use Disconnect mode " msgstr "" #: authentication.pm:109 authentication.pm:162 #, fuzzy, c-format msgid "Use anonymous BIND " msgstr "使用匿名 BIND" #: authentication.pm:110 authentication.pm:113 authentication.pm:115 #: authentication.pm:119 #, c-format msgid " " msgstr "" #: authentication.pm:111 authentication.pm:163 #, c-format msgid "Bind DN " msgstr "" #: authentication.pm:112 authentication.pm:164 #, fuzzy, c-format msgid "Bind Password " msgstr "密碼" #: authentication.pm:114 #, c-format msgid "Advanced path for group " msgstr "" #: authentication.pm:116 #, fuzzy, c-format msgid "Password base" msgstr "密碼" #: authentication.pm:117 #, fuzzy, c-format msgid "Group base" msgstr "群組 ID" #: authentication.pm:118 #, c-format msgid "Shadow base" msgstr "" #: authentication.pm:133 #, c-format msgid "" "You have selected Kerberos 5 authentication. Please review the configuration " "options below " msgstr "" #: authentication.pm:135 #, fuzzy, c-format msgid "Realm " msgstr "真實名稱" #: authentication.pm:137 #, fuzzy, c-format msgid "KDCs Servers" msgstr "LDAP 伺服器" #: authentication.pm:139 #, c-format msgid "Use DNS to resolve hosts for realms " msgstr "" #: authentication.pm:140 #, c-format msgid "Use DNS to resolve KDCs for realms " msgstr "" #: authentication.pm:145 #, fuzzy, c-format msgid "Use local file for users informations" msgstr "啟用「libsafe」防護功能" #: authentication.pm:146 #, fuzzy, c-format msgid "Use Ldap for users informations" msgstr "硬碟資訊" #: authentication.pm:152 #, c-format msgid "" "You have selected Kerberos 5 for authentication, now you must choose the " "type of users information " msgstr "" #: authentication.pm:158 #, c-format msgid "Fecth base Dn " msgstr "" #: authentication.pm:179 #, c-format msgid "" "You have selected NIS authentication. Please review the configuration " "options below " msgstr "" #: authentication.pm:181 #, c-format msgid "NIS Domain" msgstr "NIS 網域" #: authentication.pm:182 #, c-format msgid "NIS Server" msgstr "NIS 伺服器" #: authentication.pm:203 #, c-format msgid "" "You have selected Windows Domain authentication. Please review the " "configuration options below " msgstr "" #: authentication.pm:207 #, fuzzy, c-format msgid "Domain Model " msgstr "網域" #: authentication.pm:209 #, c-format msgid "Active Directory Realm " msgstr "" #: authentication.pm:225 authentication.pm:241 #, c-format msgid "Authentication" msgstr "認證方式" #: authentication.pm:227 #, c-format msgid "Authentication method" msgstr "認證方式" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:232 #, c-format msgid "No password" msgstr "沒有密碼" #: authentication.pm:253 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "這個密碼太短了 (至少要有 %d 個字元才行)" #: authentication.pm:358 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "沒有 NIS 網域無法使用廣播 (broadcast)" #: authentication.pm:873 #, c-format msgid "Select file" msgstr "選擇檔案" #: authentication.pm:879 #, fuzzy, c-format msgid "Domain Windows for authentication : " msgstr "需要 Domain 認證" #: authentication.pm:881 #, c-format msgid "Domain Admin User Name" msgstr "網域管理者名稱" #: authentication.pm:882 #, c-format msgid "Domain Admin Password" msgstr "網域管理者密碼" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:942 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" #: bootloader.pm:1110 #, c-format msgid "LILO with text menu" msgstr "LILO 文字介面選單" #: bootloader.pm:1111 #, c-format msgid "GRUB with graphical menu" msgstr "GRUB 圖形介面選單" #: bootloader.pm:1112 #, c-format msgid "GRUB with text menu" msgstr "GRUB 文字介面選單" #: bootloader.pm:1113 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:1114 #, c-format msgid "SILO" msgstr "SILO" #: bootloader.pm:1195 #, c-format msgid "not enough room in /boot" msgstr "/boot 沒有足夠的空間" #: bootloader.pm:1843 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "您無法把開機載入程式安裝在 %s 分割區上\n" #: bootloader.pm:1964 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "因為您的分割區被重新編號過,所以開機載入程式的設定必須更新" #: bootloader.pm:1977 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\"" #: bootloader.pm:1978 #, c-format msgid "Re-install Boot Loader" msgstr "重新安裝開機載入程式" #: common.pm:142 #, c-format msgid "B" msgstr "B" #: common.pm:142 #, c-format msgid "KB" msgstr "KB" #: common.pm:142 #, c-format msgid "MB" msgstr "MB" #: common.pm:142 #, c-format msgid "GB" msgstr "GB" #: common.pm:142 common.pm:151 #, c-format msgid "TB" msgstr "TB" #: common.pm:159 #, c-format msgid "%d minutes" msgstr "%d 分鐘" #: common.pm:161 #, c-format msgid "1 minute" msgstr "1 分鐘" #: common.pm:163 #, c-format msgid "%d seconds" msgstr "%d 秒" #: common.pm:358 #, c-format msgid "command %s missing" msgstr "指令 %s 遺失" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV 是一個讓您從本地端掛載網路伺服器的目錄的通訊協定,並像本地端檔案\n" "系統一樣處理它 (需要該網路伺服器設定為 WebDAV 伺服器)。如果您想要增加\n" " WebDAV 掛載點,請選擇 \"新增\"。" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "新增" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:382 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "卸載" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:379 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "掛載" #: diskdrake/dav.pm:63 #, c-format msgid "Server" msgstr "伺服器" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:373 #: diskdrake/interactive.pm:613 diskdrake/interactive.pm:631 #: diskdrake/interactive.pm:635 diskdrake/removable.pm:23 #: diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "掛載點" #: diskdrake/dav.pm:65 diskdrake/interactive.pm:375 #: diskdrake/interactive.pm:989 diskdrake/removable.pm:24 #: diskdrake/smbnfs_gtk.pm:80 #, c-format msgid "Options" msgstr "選項" #: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:174 diskdrake/removable.pm:26 #: diskdrake/smbnfs_gtk.pm:82 interactive/http.pm:151 #, c-format msgid "Done" msgstr "完成" #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:120 diskdrake/hd_gtk.pm:272 #: diskdrake/interactive.pm:233 diskdrake/interactive.pm:246 #: diskdrake/interactive.pm:480 diskdrake/interactive.pm:485 #: diskdrake/interactive.pm:603 diskdrake/interactive.pm:861 #: diskdrake/interactive.pm:1035 diskdrake/interactive.pm:1048 #: diskdrake/interactive.pm:1051 diskdrake/interactive.pm:1300 #: diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23 do_pkgs.pm:28 do_pkgs.pm:44 #: do_pkgs.pm:60 do_pkgs.pm:65 fsedit.pm:222 interactive/http.pm:117 #: interactive/http.pm:118 modules/interactive.pm:19 scanner.pm:94 #: scanner.pm:105 scanner.pm:112 scanner.pm:119 wizards.pm:95 wizards.pm:99 #: wizards.pm:121 #, c-format msgid "Error" msgstr "錯誤" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "請輸入 WevDAV 主機 URL" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL 格式必須為 http:// 或是 https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "伺服器:" #: diskdrake/dav.pm:110 diskdrake/interactive.pm:453 #: diskdrake/interactive.pm:1180 diskdrake/interactive.pm:1260 #, c-format msgid "Mount point: " msgstr "掛載點:" #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267 #, c-format msgid "Options: %s" msgstr "選項: %s" #: diskdrake/hd_gtk.pm:54 diskdrake/interactive.pm:284 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106 #: fs/partitioning_wizard.pm:51 fs/partitioning_wizard.pm:206 #: fs/partitioning_wizard.pm:211 fs/partitioning_wizard.pm:250 #: fs/partitioning_wizard.pm:269 fs/partitioning_wizard.pm:274 #, c-format msgid "Partitioning" msgstr "分割磁區" #: diskdrake/hd_gtk.pm:68 #, c-format msgid "Click on a partition, choose a filesystem type then choose an action" msgstr "" #: diskdrake/hd_gtk.pm:102 diskdrake/interactive.pm:1010 #: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1073 #, c-format msgid "Read carefully!" msgstr "仔細閱讀!" #: diskdrake/hd_gtk.pm:102 #, c-format msgid "Please make a backup of your data first" msgstr "請您先備份您的資料" #: diskdrake/hd_gtk.pm:103 diskdrake/interactive.pm:226 #, c-format msgid "Exit" msgstr "離開" #: diskdrake/hd_gtk.pm:103 #, c-format msgid "Continue" msgstr "繼續" #: diskdrake/hd_gtk.pm:170 interactive.pm:649 interactive/gtk.pm:781 #: interactive/gtk.pm:797 interactive/gtk.pm:815 ugtk2.pm:933 ugtk2.pm:934 #, c-format msgid "Help" msgstr "輔助說明" #: diskdrake/hd_gtk.pm:208 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "您有一個很大的 Microsoft Windows 分割區。\n" "建議您先重新改變這個分割區的大小\n" "(點選它,然後按 \"重新改變大小\")" #: diskdrake/hd_gtk.pm:210 #, c-format msgid "Please click on a partition" msgstr "請點選一個分割區" #: diskdrake/hd_gtk.pm:224 diskdrake/smbnfs_gtk.pm:63 #, c-format msgid "Details" msgstr "詳細資訊" #: diskdrake/hd_gtk.pm:272 #, c-format msgid "No hard drives found" msgstr "找不到硬碟裝置" #: diskdrake/hd_gtk.pm:299 #, c-format msgid "Unknown" msgstr "未知的" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "Ext3" msgstr "Ext3" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "XFS" msgstr "XFS" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:361 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:362 services.pm:158 #, c-format msgid "Other" msgstr "其他" #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:1195 #, c-format msgid "Empty" msgstr "空白" #: diskdrake/hd_gtk.pm:369 #, c-format msgid "Filesystem types:" msgstr "檔案系統格式:" #: diskdrake/hd_gtk.pm:390 diskdrake/interactive.pm:289 #: diskdrake/interactive.pm:361 diskdrake/interactive.pm:510 #: diskdrake/interactive.pm:694 diskdrake/interactive.pm:752 #: diskdrake/interactive.pm:841 diskdrake/interactive.pm:883 #: diskdrake/interactive.pm:884 diskdrake/interactive.pm:1118 #: diskdrake/interactive.pm:1156 diskdrake/interactive.pm:1299 do_pkgs.pm:19 #: do_pkgs.pm:39 do_pkgs.pm:57 harddrake/sound.pm:422 #, c-format msgid "Warning" msgstr "警告" #: diskdrake/hd_gtk.pm:390 #, c-format msgid "This partition is already empty" msgstr "這個分割區已經是空白的了" #: diskdrake/hd_gtk.pm:399 #, c-format msgid "Use ``Unmount'' first" msgstr "要先 ``Unmount''" #: diskdrake/hd_gtk.pm:399 #, c-format msgid "Use ``%s'' instead (in expert mode)" msgstr "用 ``%s'' 代替 (在專家模式)" #: diskdrake/hd_gtk.pm:399 diskdrake/interactive.pm:374 #: diskdrake/interactive.pm:548 diskdrake/interactive.pm:1026 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #, c-format msgid "Type" msgstr "格式" #: diskdrake/interactive.pm:197 #, c-format msgid "Choose another partition" msgstr "選擇另一個分割區" #: diskdrake/interactive.pm:197 #, c-format msgid "Choose a partition" msgstr "選擇一個分割區" #: diskdrake/interactive.pm:259 #, c-format msgid "Toggle to normal mode" msgstr "切換到一般模式" #: diskdrake/interactive.pm:259 #, c-format msgid "Toggle to expert mode" msgstr "切換到專家模式" #: diskdrake/interactive.pm:267 diskdrake/interactive.pm:277 #: diskdrake/interactive.pm:1103 #, c-format msgid "Confirmation" msgstr "確認" #: diskdrake/interactive.pm:267 #, c-format msgid "Continue anyway?" msgstr "無論如何都要繼續嗎?" #: diskdrake/interactive.pm:272 #, c-format msgid "Quit without saving" msgstr "不儲存就離開" #: diskdrake/interactive.pm:272 #, c-format msgid "Quit without writing the partition table?" msgstr "放棄寫入硬碟分割表就離開?" #: diskdrake/interactive.pm:277 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎?" #: diskdrake/interactive.pm:284 fs/partitioning_wizard.pm:250 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "您必須重新開機以使更動過的硬碟分割表生效" #: diskdrake/interactive.pm:289 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "您應該格式化分割區 %s。\n" "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n" "仍然要離開嗎?" #: diskdrake/interactive.pm:302 #, c-format msgid "Clear all" msgstr "全部清除" #: diskdrake/interactive.pm:303 #, c-format msgid "Auto allocate" msgstr "自動分配" #: diskdrake/interactive.pm:304 diskdrake/interactive.pm:352 #: interactive/curses.pm:512 #, c-format msgid "More" msgstr "更多" #: diskdrake/interactive.pm:309 #, c-format msgid "Hard drive information" msgstr "硬碟資訊" #: diskdrake/interactive.pm:341 #, c-format msgid "All primary partitions are used" msgstr "主分割區數目已經全被用了" #: diskdrake/interactive.pm:342 #, c-format msgid "I can not add any more partitions" msgstr "我無法再新增任何分割區了" #: diskdrake/interactive.pm:343 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "需要有更多的分割區的話,請刪除一個主分割區以建立延伸分割區" #: diskdrake/interactive.pm:354 #, c-format msgid "Reload partition table" msgstr "重新載入硬碟分割表" #: diskdrake/interactive.pm:361 #, c-format msgid "Detailed information" msgstr "詳細資訊" #: diskdrake/interactive.pm:377 diskdrake/interactive.pm:707 #, c-format msgid "Resize" msgstr "重新變更大小" #: diskdrake/interactive.pm:378 #, c-format msgid "Format" msgstr "格式化" #: diskdrake/interactive.pm:380 diskdrake/interactive.pm:793 #, c-format msgid "Add to RAID" msgstr "加入到磁碟陣列" #: diskdrake/interactive.pm:381 diskdrake/interactive.pm:811 #, c-format msgid "Add to LVM" msgstr "加入到 LVM" #: diskdrake/interactive.pm:383 #, c-format msgid "Delete" msgstr "刪除" #: diskdrake/interactive.pm:384 #, c-format msgid "Remove from RAID" msgstr "由磁碟陣列中移除" #: diskdrake/interactive.pm:385 #, c-format msgid "Remove from LVM" msgstr "由 LVM 中移除" #: diskdrake/interactive.pm:386 #, c-format msgid "Modify RAID" msgstr "變更磁碟陣列" #: diskdrake/interactive.pm:387 #, c-format msgid "Use for loopback" msgstr "作為 loopback" #: diskdrake/interactive.pm:398 #, c-format msgid "Create" msgstr "建立" #: diskdrake/interactive.pm:442 diskdrake/interactive.pm:444 #, c-format msgid "Create a new partition" msgstr "建立新的分割區" #: diskdrake/interactive.pm:446 #, c-format msgid "Start sector: " msgstr "開始的磁區:" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:876 #, c-format msgid "Size in MB: " msgstr "大小 (MB):" #: diskdrake/interactive.pm:451 diskdrake/interactive.pm:877 #, c-format msgid "Filesystem type: " msgstr "檔案系統格式:" #: diskdrake/interactive.pm:457 #, c-format msgid "Preference: " msgstr "偏好設定:" #: diskdrake/interactive.pm:460 #, c-format msgid "Logical volume name " msgstr "邏輯磁區名稱" #: diskdrake/interactive.pm:480 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "您無法建立新的分割區\n" "(因為您已經達到主分割區的最大值)。\n" "您需要先移除一個主分割區然後建立一個延伸分割區。" #: diskdrake/interactive.pm:510 #, c-format msgid "Remove the loopback file?" msgstr "移除 loopback 檔案?" #: diskdrake/interactive.pm:532 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "改變分割區 %s 的格式以後,所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:545 #, c-format msgid "Change partition type" msgstr "改變分割區格式" #: diskdrake/interactive.pm:547 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "您要用那一種檔案系統?" #: diskdrake/interactive.pm:554 #, c-format msgid "Switching from %s to %s" msgstr "正在由 %s 切換至 %s" #: diskdrake/interactive.pm:580 diskdrake/interactive.pm:583 #, c-format msgid "Which volume label?" msgstr "哪一個磁區標籤?" #: diskdrake/interactive.pm:584 #, c-format msgid "Label:" msgstr "標籤:" #: diskdrake/interactive.pm:598 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "您要把 loopback 檔案 %s 掛載在那裡?" #: diskdrake/interactive.pm:599 #, c-format msgid "Where do you want to mount device %s?" msgstr "您要把這個裝置 %s 掛載在那裡?" #: diskdrake/interactive.pm:604 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "因為這個分割區被用作 loop back 使用,所以無法解除\n" "這個掛載點。請先取消 loopback 的設定" #: diskdrake/interactive.pm:634 #, c-format msgid "Where do you want to mount %s?" msgstr "您要將 %s 掛載在那裡?" #: diskdrake/interactive.pm:658 diskdrake/interactive.pm:741 #: fs/partitioning_wizard.pm:146 fs/partitioning_wizard.pm:178 #, c-format msgid "Resizing" msgstr "正在重設大小" #: diskdrake/interactive.pm:658 #, c-format msgid "Computing FAT filesystem bounds" msgstr "正在計算 FAT 分割區的邊界" #: diskdrake/interactive.pm:694 #, c-format msgid "This partition is not resizeable" msgstr "這個分割區無法重新調整大小" #: diskdrake/interactive.pm:699 #, c-format msgid "All data on this partition should be backed-up" msgstr "所有在這個分割區上的資料都應該先經過備份" #: diskdrake/interactive.pm:701 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "在改變分割區 %s 的大小以後,所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:708 #, c-format msgid "Choose the new size" msgstr "選取新的大小" #: diskdrake/interactive.pm:709 #, c-format msgid "New size in MB: " msgstr "新大小 (MB):" #: diskdrake/interactive.pm:710 #, c-format msgid "Minimum size: %s MB" msgstr "最小容量:%s MB" #: diskdrake/interactive.pm:711 #, c-format msgid "Maximum size: %s MB" msgstr "最大容量:%s MB" #: diskdrake/interactive.pm:752 fs/partitioning_wizard.pm:186 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Microsoft Windows®" msgstr "" "為確保重新調整分割區大小後的資料正確性,當您下次從 Windows(TM)\n" "開機時便會執行檔案系統檢查。" #: diskdrake/interactive.pm:793 #, c-format msgid "Choose an existing RAID to add to" msgstr "選取一存在的磁碟陣列加入到" #: diskdrake/interactive.pm:795 diskdrake/interactive.pm:813 #, c-format msgid "new" msgstr "新增" #: diskdrake/interactive.pm:811 #, c-format msgid "Choose an existing LVM to add to" msgstr "選取一個已經存在的 LVM 以加入" #: diskdrake/interactive.pm:818 #, c-format msgid "LVM name?" msgstr "LVM 名稱?" #: diskdrake/interactive.pm:841 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" "實體磁區 %s 仍然在使用中。\n" "您要把位於這個磁區的實體延伸移到另一個磁區嗎?" #: diskdrake/interactive.pm:843 #, c-format msgid "Moving physical extents" msgstr "移動實體延伸" #: diskdrake/interactive.pm:861 #, c-format msgid "This partition can not be used for loopback" msgstr "這個分割區不能用來作為 loopback" #: diskdrake/interactive.pm:874 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:875 #, c-format msgid "Loopback file name: " msgstr "Loopback 檔案名稱:" #: diskdrake/interactive.pm:880 #, c-format msgid "Give a file name" msgstr "輸入一個檔案名稱" #: diskdrake/interactive.pm:883 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "檔案已被用來作為其他的 loopback,請選擇其他檔案" #: diskdrake/interactive.pm:884 #, c-format msgid "File already exists. Use it?" msgstr "檔案已經存在了。要使用它嗎?" #: diskdrake/interactive.pm:916 diskdrake/interactive.pm:919 #, c-format msgid "Mount options" msgstr "掛載參數" #: diskdrake/interactive.pm:926 #, c-format msgid "Various" msgstr "各種的" #: diskdrake/interactive.pm:991 #, c-format msgid "device" msgstr "裝置" #: diskdrake/interactive.pm:992 #, c-format msgid "level" msgstr "階層" #: diskdrake/interactive.pm:993 #, c-format msgid "chunk size in KiB" msgstr "組塊大小以 KiB 計量" #: diskdrake/interactive.pm:1011 #, c-format msgid "Be careful: this operation is dangerous." msgstr "請小心:這個動作很危險。" #: diskdrake/interactive.pm:1026 #, fuzzy, c-format msgid "Partitioning Type" msgstr "分割磁區" #: diskdrake/interactive.pm:1026 #, c-format msgid "What type of partitioning?" msgstr "以那種形式分割?" #: diskdrake/interactive.pm:1064 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "您需要重新開機以便於讓異動的設定生效" #: diskdrake/interactive.pm:1073 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表!" #: diskdrake/interactive.pm:1098 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "在對分割區 %s 進行格式化的動作以後,所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:1103 fs/partitioning.pm:48 #, c-format msgid "Check bad blocks?" msgstr "檢查壞掉的區塊?" #: diskdrake/interactive.pm:1117 #, c-format msgid "Move files to the new partition" msgstr "將檔案搬移到新的分割區" #: diskdrake/interactive.pm:1117 #, c-format msgid "Hide files" msgstr "隱藏檔案" #: diskdrake/interactive.pm:1118 #, c-format msgid "" "Directory %s already contains data\n" "(%s)\n" "\n" "You can either choose to move the files into the partition that will be " "mounted there or leave them where they are (which results in hiding them by " "the contents of the mounted partition)" msgstr "" "目錄 %s 裡面已經含有資料了\n" "(%s)\n" "\n" "您可以選擇把檔案移入要掛載到此的磁區中,或者把它們留在原地 (這會讓它們隱藏起" "來,而目錄中顯示出來的會是掛載上的磁區內容)" #: diskdrake/interactive.pm:1133 #, c-format msgid "Moving files to the new partition" msgstr "正在將檔案搬移到新的分割區" #: diskdrake/interactive.pm:1137 #, c-format msgid "Copying %s" msgstr "正在複製 %s" #: diskdrake/interactive.pm:1141 #, c-format msgid "Removing %s" msgstr "正在移除 %s" #: diskdrake/interactive.pm:1155 #, c-format msgid "partition %s is now known as %s" msgstr "分割區 %s 現在被命名為 %s 了" #: diskdrake/interactive.pm:1156 #, c-format msgid "Partitions have been renumbered: " msgstr "分割區已經重新編號:" #: diskdrake/interactive.pm:1181 diskdrake/interactive.pm:1244 #, c-format msgid "Device: " msgstr "裝置:" #: diskdrake/interactive.pm:1182 #, c-format msgid "Volume label: " msgstr "磁區標籤:" #: diskdrake/interactive.pm:1183 #, c-format msgid "UUID: " msgstr "UUID:" #: diskdrake/interactive.pm:1184 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 磁碟代號:%s (猜測值)\n" #: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1197 #: diskdrake/interactive.pm:1263 #, c-format msgid "Type: " msgstr "格式:" #: diskdrake/interactive.pm:1192 diskdrake/interactive.pm:1248 #, c-format msgid "Name: " msgstr "名稱:" #: diskdrake/interactive.pm:1199 #, c-format msgid "Start: sector %s\n" msgstr "始於:第 %s 扇區\n" #: diskdrake/interactive.pm:1200 #, c-format msgid "Size: %s" msgstr "大小:%s" #: diskdrake/interactive.pm:1202 #, c-format msgid ", %s sectors" msgstr ",%s 扇區" #: diskdrake/interactive.pm:1204 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d 磁柱到第 %d 磁柱\n" #: diskdrake/interactive.pm:1205 #, c-format msgid "Number of logical extents: %d\n" msgstr "邏輯延伸的數目:%d\n" #: diskdrake/interactive.pm:1206 #, c-format msgid "Formatted\n" msgstr "已格式化\n" #: diskdrake/interactive.pm:1207 #, c-format msgid "Not formatted\n" msgstr "未格式化\n" #: diskdrake/interactive.pm:1208 #, c-format msgid "Mounted\n" msgstr "已掛載\n" #: diskdrake/interactive.pm:1209 #, c-format msgid "RAID %s\n" msgstr "磁碟陣列 %s\n" #: diskdrake/interactive.pm:1214 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "loopback 檔案:\n" " %s\n" #: diskdrake/interactive.pm:1215 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "預設開機的分割區\n" " (給 MS-DOS 開機程式用的,跟 lilo 無關)\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "Level %s\n" msgstr "階層 %s\n" #: diskdrake/interactive.pm:1218 #, c-format msgid "Chunk size %d KiB\n" msgstr "組塊大小 %d KiB\n" #: diskdrake/interactive.pm:1219 #, c-format msgid "RAID-disks %s\n" msgstr "磁碟陣列-磁碟 %s\n" #: diskdrake/interactive.pm:1221 #, c-format msgid "Loopback file name: %s" msgstr "Loopback 檔案名稱: %s" #: diskdrake/interactive.pm:1224 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "可能是這樣的,這個分割區\n" "是透過驅動程式產生出來的\n" "您應該不要去異動這個分割區資料。\n" #: diskdrake/interactive.pm:1227 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "這個特殊分割區是用來作為\n" "雙重開機使用的。\n" #: diskdrake/interactive.pm:1236 #, c-format msgid "Free space on %s (%s)" msgstr "" #: diskdrake/interactive.pm:1245 #, c-format msgid "Read-only" msgstr "唯讀" #: diskdrake/interactive.pm:1246 #, c-format msgid "Size: %s\n" msgstr "大小:%s\n" #: diskdrake/interactive.pm:1247 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "幾何:%s 磁柱,%s 讀寫頭,%s 扇區\n" #: diskdrake/interactive.pm:1249 #, c-format msgid "Medium type: " msgstr "媒體型式:" #: diskdrake/interactive.pm:1250 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-磁碟 %s\n" #: diskdrake/interactive.pm:1251 #, c-format msgid "Partition table type: %s\n" msgstr "硬碟分割表形式:%s\n" #: diskdrake/interactive.pm:1252 #, c-format msgid "on channel %d id %d\n" msgstr "位在通道 %d id %d\n" #: diskdrake/interactive.pm:1295 #, c-format msgid "Filesystem encryption key" msgstr "檔案系統加密金鑰" #: diskdrake/interactive.pm:1296 #, c-format msgid "Choose your filesystem encryption key" msgstr "選擇您檔案系統所使用的加密金鑰" #: diskdrake/interactive.pm:1299 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)" #: diskdrake/interactive.pm:1300 #, c-format msgid "The encryption keys do not match" msgstr "輸入的加密金鑰不符合" #: diskdrake/interactive.pm:1303 #, c-format msgid "Encryption key" msgstr "加密金鑰" #: diskdrake/interactive.pm:1304 #, c-format msgid "Encryption key (again)" msgstr "再次輸入加密金鑰" #: diskdrake/interactive.pm:1306 #, c-format msgid "Encryption algorithm" msgstr "加密演算法" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "改變分割區格式" #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:546 #: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160 #: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:415 ugtk2.pm:517 #: ugtk2.pm:526 ugtk2.pm:813 #, c-format msgid "Cancel" msgstr "取消" #: diskdrake/smbnfs_gtk.pm:164 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "無法使用 %s 使用者名稱登入系統 (密碼錯誤?)" #: diskdrake/smbnfs_gtk.pm:168 diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "Domain Authentication Required" msgstr "需要 Domain 認證" #: diskdrake/smbnfs_gtk.pm:169 #, c-format msgid "Which username" msgstr "那個使用者名稱" #: diskdrake/smbnfs_gtk.pm:169 #, c-format msgid "Another one" msgstr "另外一個" #: diskdrake/smbnfs_gtk.pm:178 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "請輸入你的使用者名稱,密碼以及網域名稱,以便於能夠連線存取這個主機。" #: diskdrake/smbnfs_gtk.pm:180 #, c-format msgid "Username" msgstr "使用者名稱" #: diskdrake/smbnfs_gtk.pm:182 #, c-format msgid "Domain" msgstr "網域" #: diskdrake/smbnfs_gtk.pm:206 #, c-format msgid "Search servers" msgstr "搜尋伺服器" #: diskdrake/smbnfs_gtk.pm:211 #, c-format msgid "Search new servers" msgstr "搜尋新的伺服器" #: do_pkgs.pm:19 do_pkgs.pm:57 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "需要安裝 %s 這個套件,您要安裝它嗎?" #: do_pkgs.pm:23 do_pkgs.pm:44 do_pkgs.pm:60 #, c-format msgid "Could not install the %s package!" msgstr "無法安裝 %s 套件!" #: do_pkgs.pm:28 do_pkgs.pm:65 #, c-format msgid "Mandatory package %s is missing" msgstr "遺失了必要的 %s 套件" #: do_pkgs.pm:39 #, c-format msgid "The following packages need to be installed:\n" msgstr "需要安裝下列套件:\n" #: do_pkgs.pm:221 #, c-format msgid "Installing packages..." msgstr "正在安裝套件..." #: do_pkgs.pm:267 #, c-format msgid "Removing packages..." msgstr "正在移除套件..." #: fs/any.pm:17 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統,請檢查您的硬體" "以找出問題的原因所在" #: fs/any.pm:75 fs/partitioning_wizard.pm:59 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區" #: fs/format.pm:63 fs/format.pm:70 #, c-format msgid "Formatting partition %s" msgstr "正在格式化分割區 %s" #: fs/format.pm:67 #, c-format msgid "Creating and formatting file %s" msgstr "建立並格式化檔案 %s" #: fs/format.pm:122 #, c-format msgid "I do not know how to format %s in type %s" msgstr "不知道要如何將 %s 格式化為 %s 格式" #: fs/format.pm:127 fs/format.pm:129 #, c-format msgid "%s formatting of %s failed" msgstr "以 %s 格式化 %s 失敗" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "循環掛載 %s\n" #: fs/mount.pm:79 #, c-format msgid "Mounting partition %s" msgstr "正在掛載分割區 %s" #: fs/mount.pm:80 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗" #: fs/mount.pm:85 fs/mount.pm:102 #, c-format msgid "Checking %s" msgstr "檢查 %s" #: fs/mount.pm:119 partition_table.pm:403 #, c-format msgid "error unmounting %s: %s" msgstr "卸下 %s 的掛載時發生錯誤:%s" #: fs/mount.pm:134 #, c-format msgid "Enabling swap partition %s" msgstr "正在啟用 swap 分割區 %s" #: fs/mount_options.pm:115 #, c-format msgid "Use an encrypted file system" msgstr "使用加密的檔案系統" #: fs/mount_options.pm:117 #, c-format msgid "Flush write cache on file close" msgstr "" #: fs/mount_options.pm:119 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "啟用群組磁碟配額計算與選擇性的執行限制" #: fs/mount_options.pm:121 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:124 #, c-format msgid "" "Update inode access times on this filesystem in a more efficient way\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:127 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "只能手動掛載 (亦即 mount 時使用 -a 參數將不會\n" "自動掛載這個檔案系統)。" #: fs/mount_options.pm:130 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:132 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:136 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "不允許 set-user-identifier 或 set-group-identifier 作用。\n" "(這樣似乎是安全的,但當您有安裝 suidperl(1) 時則不然。)" #: fs/mount_options.pm:140 #, c-format msgid "Mount the file system read-only." msgstr "以唯讀方式掛載檔案系統。" #: fs/mount_options.pm:142 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "所有對於此檔案系統的存取 (I/O) 動作必須同步。" #: fs/mount_options.pm:144 #, c-format msgid "Allow every user to mount and umount the file system." msgstr "允許所有的使用者掛載與卸載這個檔案系統。" #: fs/mount_options.pm:146 #, c-format msgid "Allow an ordinary user to mount the file system." msgstr "允許一般使用者掛載這個檔案系統。" #: fs/mount_options.pm:148 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "啟用使用者磁碟配額計算與選擇性的執行限制" #: fs/mount_options.pm:150 #, c-format msgid "Support \"user.\" extended attributes" msgstr "支援 \"user.\" 延伸屬性" #: fs/mount_options.pm:152 #, c-format msgid "Give write access to ordinary users" msgstr "授予寫入權限給一般使用者" #: fs/mount_options.pm:154 #, c-format msgid "Give read-only access to ordinary users" msgstr "授予唯讀權限給一般使用者" #: fs/mount_point.pm:80 #, c-format msgid "Duplicate mount point %s" msgstr "重複的掛載點 %s" #: fs/mount_point.pm:95 #, c-format msgid "No partition available" msgstr "沒有可用的分割區" #: fs/mount_point.pm:98 #, c-format msgid "Scanning partitions to find mount points" msgstr "正在掃描分割區以尋找掛載點" #: fs/mount_point.pm:105 #, c-format msgid "Choose the mount points" msgstr "選取掛載點" #: fs/partitioning.pm:46 #, c-format msgid "Choose the partitions you want to format" msgstr "選擇要格式化的分割區" #: fs/partitioning.pm:75 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "無法檢查檔案系統 %s。您要修復該錯誤嗎? (請注意,您可能會遺失資料)" #: fs/partitioning.pm:78 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝,請增加一些" #: fs/partitioning_wizard.pm:51 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "您必須指定一個分割區來放根目錄。\n" "請建立一個分割區 (或點選一個已經存在的),\n" "接著選動作 \"掛載點\" 且把它設成 \"/\"" #: fs/partitioning_wizard.pm:56 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "您沒有設定置換分割區 (swap)。\n" "\n" "不管如何都要繼續?" #: fs/partitioning_wizard.pm:84 #, c-format msgid "Use free space" msgstr "使用未用到的空間" #: fs/partitioning_wizard.pm:86 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "沒有足夠的空間可以建立新的分割區了" #: fs/partitioning_wizard.pm:94 #, c-format msgid "Use existing partitions" msgstr "使用已經存在的分割區" #: fs/partitioning_wizard.pm:96 #, c-format msgid "There is no existing partition to use" msgstr "沒有已經存在的分割區可供使用" #: fs/partitioning_wizard.pm:103 #, c-format msgid "Use the Microsoft Windows® partition for loopback" msgstr "使用 Microsoft Windows® 分割區作為 loopback" #: fs/partitioning_wizard.pm:106 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "您希望要用那個分割區給 Linux4Win 來使用呢?" #: fs/partitioning_wizard.pm:108 #, c-format msgid "Choose the sizes" msgstr "選取大小" #: fs/partitioning_wizard.pm:109 #, c-format msgid "Root partition size in MB: " msgstr "根分割區的大小 (MB):" #: fs/partitioning_wizard.pm:110 #, c-format msgid "Swap partition size in MB: " msgstr "置換分割區 (swap) 的大小 (MB):" #: fs/partitioning_wizard.pm:119 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "沒有可用的 FAT 分割區能當成 loopback 使用 (或者是沒有足夠的剩餘空間)" #: fs/partitioning_wizard.pm:127 #, fuzzy, c-format msgid "Use the free space on a Microsoft Windows® partition" msgstr "使用 Windows 分割區所剩餘的可用空間" #: fs/partitioning_wizard.pm:129 #, c-format msgid "Which partition do you want to resize?" msgstr "您要重新調整那個分割區的大小?" #: fs/partitioning_wizard.pm:143 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "FAT 容量調整程式無法處理您的分割區,\n" "發生了以下的錯誤: %s" #: fs/partitioning_wizard.pm:146 #, c-format msgid "Computing the size of the Microsoft Windows® partition" msgstr "正在計算 Microsoft Windows® 分割區大小" #: fs/partitioning_wizard.pm:153 #, c-format msgid "" "Your Microsoft Windows® partition is too fragmented. Please reboot your " "computer under Microsoft Windows®, run the ``defrag'' utility, then restart " "the Mandriva Linux installation." msgstr "" "您的 Microsoft Windows® 分割區太支離破碎。請先用 Microsoft Windows® 重新開" "機,執行 ``defrag'' 工具程式,然後重新開始安裝 Mandriva Linux 。" #: fs/partitioning_wizard.pm:156 #, c-format msgid "" "WARNING!\n" "\n" "\n" "Your Microsoft Windows® partition will be now resized.\n" "\n" "\n" "Be careful: this operation is dangerous. If you have not already done so, " "you first need to exit the installation, run \"chkdsk c:\" from a Command " "Prompt under Microsoft Windows® (beware, running graphical program \"scandisk" "\" is not enough, be sure to use \"chkdsk\" in a Command Prompt!), " "optionally run defrag, then restart the installation. You should also backup " "your data.\n" "\n" "\n" "When sure, press %s." msgstr "" "警告!\n" "\n" "\n" "DrakX 現在將要重新調整您 Windows 分割區的大小。\n" "\n" "\n" "請注意:這個動作是很危險的。如果您不曾做過,您必須先離開安裝程式,在 Windows " "命令提示字元下執行 \"chkdsk c:\" (請注意,執行圖形介面的程式\"scandisk\" 並不" "夠,請確定是在命令提示下使用 \"chkdsk\"!),您還可以額外執行 defrag,然後重新" "開始安裝。您也應該備份您的資料。\n" "\n" "\n" "當您確定之後,請按下%s。" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: fs/partitioning_wizard.pm:165 interactive.pm:545 interactive/curses.pm:263 #: ugtk2.pm:519 #, c-format msgid "Next" msgstr "下一步" #: fs/partitioning_wizard.pm:168 #, c-format msgid "Partitionning" msgstr "分割磁區" #: fs/partitioning_wizard.pm:168 #, c-format msgid "Which size do you want to keep for Microsoft Windows® on partition %s?" msgstr "您要保留多少空間給 Microsoft Windows® 使用 分割區 %s?" #: fs/partitioning_wizard.pm:169 #, c-format msgid "Size" msgstr "大小" #: fs/partitioning_wizard.pm:178 #, c-format msgid "Resizing Microsoft Windows® partition" msgstr "正在重新調整 Microsoft Windows® 分割區大小" #: fs/partitioning_wizard.pm:183 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT 重新調整大小失敗: %s" #: fs/partitioning_wizard.pm:198 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)" #: fs/partitioning_wizard.pm:203 #, c-format msgid "Remove Microsoft Windows®" msgstr "移除 Microsoft Windows®" #: fs/partitioning_wizard.pm:203 #, c-format msgid "Erase and use entire disk" msgstr "清除並使用整個磁碟" #: fs/partitioning_wizard.pm:205 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "您有多個硬碟,您打算用那一個來安裝 linux?" #: fs/partitioning_wizard.pm:210 fsedit.pm:570 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失" #: fs/partitioning_wizard.pm:220 #, c-format msgid "Custom disk partitioning" msgstr "自訂磁碟分割" #: fs/partitioning_wizard.pm:226 #, c-format msgid "Use fdisk" msgstr "使用 fdisk" #: fs/partitioning_wizard.pm:229 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "您現在可以對 %s 分割區進行劃分動作.\n" "當您完成時, 別忘了使用 'w' 儲存" #: fs/partitioning_wizard.pm:269 #, c-format msgid "I can not find any room for installing" msgstr "找不到任何可用的安裝空間" #: fs/partitioning_wizard.pm:278 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX 分割精靈找到了下列方案:" #: fs/partitioning_wizard.pm:287 #, c-format msgid "Partitioning failed: %s" msgstr "硬碟分割失敗:%s" #: fs/type.pm:370 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "小於 16MB 的分割區不能使用 JFS 格式" #: fs/type.pm:371 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式" #: fsedit.pm:23 #, c-format msgid "simple" msgstr "簡單" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "將 /usr 分別掛載" #: fsedit.pm:32 #, c-format msgid "server" msgstr "伺服器" #: fsedit.pm:116 #, c-format msgid "BIOS software RAID detected on disks %s. Activate it?" msgstr "在磁碟機 %s 偵測到 BIOS 軟體 RAID。要啟用嗎?" #: fsedit.pm:223 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "我無法讀取 %s 裝置的磁碟分割表,它已經嚴重毀損:(我\n" "可以試著繼續,並清除壞掉的分割區 (將失去所有資料!)。\n" "另一種方法是不允許 DrakX 更改磁碟分割表。\n" "(錯誤是 %s)\n" "\n" "您同意要清除所有的分割區嗎?\n" #: fsedit.pm:397 #, c-format msgid "Mount points must begin with a leading /" msgstr "掛載點必需以 / 開頭" #: fsedit.pm:398 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "掛載點應該只有包含英文字母與數字與底線這類字元" #: fsedit.pm:399 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "已經有分割區分配到掛載點 %s 了\n" #: fsedit.pm:403 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "您選擇了將一塊軟體磁碟陣列的分割區作為根目錄 (/) 的掛載點。\n" "但開機載入程式無法處理這種 /boot 目錄不位於實體分割區的情況。\n" "請確定會新增一個掛載於實體分割區的 /boot 目錄" #: fsedit.pm:409 #, c-format msgid "" "You can not use the LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "您不能使用 LVM 邏輯磁區來作為 %s 的掛載點,因為它跨越了實體磁區" #: fsedit.pm:411 #, c-format msgid "" "You've selected the LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" "您選擇了一塊 LVM 邏輯磁區作為根目錄 (/) 。\n" "但開機載入程式無法在這個磁區跨越了實體磁區的情況下運作。\n" "您應該先建立一個 /boot 分割區" #: fsedit.pm:415 fsedit.pm:417 #, c-format msgid "This directory should remain within the root filesystem" msgstr "這個目錄應該放在根檔案系統 (/) 才對" #: fsedit.pm:419 fsedit.pm:421 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n" #: fsedit.pm:423 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點" #: fsedit.pm:487 #, c-format msgid "Not enough free space for auto-allocating" msgstr "沒有足夠的空間來進行自動配置" #: fsedit.pm:489 #, c-format msgid "Nothing to do" msgstr "沒有做任何動作" #: harddrake/data.pm:64 #, c-format msgid "SATA controllers" msgstr "SATA 控制器" #: harddrake/data.pm:73 #, c-format msgid "RAID controllers" msgstr "RAID 控制器" #: harddrake/data.pm:83 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA 控制器" #: harddrake/data.pm:93 #, c-format msgid "Card readers" msgstr "讀卡機" #: harddrake/data.pm:102 #, c-format msgid "Firewire controllers" msgstr "Firewire 控制器" #: harddrake/data.pm:111 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA 控制器" #: harddrake/data.pm:120 #, c-format msgid "SCSI controllers" msgstr "SCSI 控制器" #: harddrake/data.pm:129 #, c-format msgid "USB controllers" msgstr "USB 控制器" #: harddrake/data.pm:138 #, c-format msgid "USB ports" msgstr "USB 埠" #: harddrake/data.pm:147 #, c-format msgid "SMBus controllers" msgstr "SMBus 控制器" #: harddrake/data.pm:156 #, c-format msgid "Bridges and system controllers" msgstr "橋樑與系統控制器" #: harddrake/data.pm:168 #, c-format msgid "Floppy" msgstr "軟碟機" #: harddrake/data.pm:178 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:194 #, c-format msgid "Hard Disk" msgstr "硬碟" #: harddrake/data.pm:204 #, c-format msgid "USB Mass Storage Devices" msgstr "USB 大量儲存裝置" #: harddrake/data.pm:213 #, c-format msgid "CDROM" msgstr "光碟機" #: harddrake/data.pm:223 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD 燒錄器" #: harddrake/data.pm:233 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:243 #, c-format msgid "Tape" msgstr "磁帶" #: harddrake/data.pm:254 #, c-format msgid "AGP controllers" msgstr "AGP 控制器" #: harddrake/data.pm:263 #, c-format msgid "Videocard" msgstr "顯示卡" #: harddrake/data.pm:272 #, c-format msgid "DVB card" msgstr "數位電視卡" #: harddrake/data.pm:280 #, c-format msgid "Tvcard" msgstr "電視卡" #: harddrake/data.pm:290 #, c-format msgid "Other MultiMedia devices" msgstr "其他多媒體裝置" #: harddrake/data.pm:299 #, c-format msgid "Soundcard" msgstr "音效卡" #: harddrake/data.pm:312 #, c-format msgid "Webcam" msgstr "網路攝影機" #: harddrake/data.pm:326 #, c-format msgid "Processors" msgstr "處理器" #: harddrake/data.pm:336 #, c-format msgid "ISDN adapters" msgstr "ISDN 介面卡" #: harddrake/data.pm:347 #, c-format msgid "USB sound devices" msgstr "USB 音效裝置" #: harddrake/data.pm:356 #, c-format msgid "Radio cards" msgstr "廣播卡" #: harddrake/data.pm:365 #, c-format msgid "ATM network cards" msgstr "ATM 網路卡" #: harddrake/data.pm:374 #, c-format msgid "WAN network cards" msgstr "WAN 網路卡" #: harddrake/data.pm:383 #, c-format msgid "Bluetooth devices" msgstr "藍芽裝置" #: harddrake/data.pm:392 #, c-format msgid "Ethernetcard" msgstr "乙太網路介面卡" #: harddrake/data.pm:409 #, c-format msgid "Modem" msgstr "數據機" #: harddrake/data.pm:419 #, c-format msgid "ADSL adapters" msgstr "ADSL 介面卡" #: harddrake/data.pm:431 #, c-format msgid "Memory" msgstr "記憶體" #: harddrake/data.pm:440 #, c-format msgid "Printer" msgstr "印表機" #. -PO: these are joysticks controllers: #: harddrake/data.pm:454 #, c-format msgid "Game port controllers" msgstr "搖桿埠控制器" #: harddrake/data.pm:463 #, c-format msgid "Joystick" msgstr "搖桿" #: harddrake/data.pm:473 #, c-format msgid "Keyboard" msgstr "鍵盤" #: harddrake/data.pm:486 #, c-format msgid "Tablet and touchscreen" msgstr "Tablet 與觸控螢幕" #: harddrake/data.pm:495 #, c-format msgid "Mouse" msgstr "滑鼠" #: harddrake/data.pm:509 #, c-format msgid "Biometry" msgstr "" #: harddrake/data.pm:517 #, c-format msgid "UPS" msgstr "UPS 不斷電系統" #: harddrake/data.pm:526 #, c-format msgid "Scanner" msgstr "掃描器" #: harddrake/data.pm:537 #, c-format msgid "Unknown/Others" msgstr "未知/其他" #: harddrake/data.pm:565 #, c-format msgid "cpu # " msgstr "CPU 編號" #: harddrake/sound.pm:285 #, c-format msgid "Please Wait... Applying the configuration" msgstr "請稍待... 正在套用該設定" #: harddrake/sound.pm:346 #, c-format msgid "Enable PulseAudio" msgstr "啟用 PulseAudio" #: harddrake/sound.pm:350 #, c-format msgid "Automatic routing from ALSA to PulseAudio" msgstr "自動將 ALSA 導向 PulseAudio" #: harddrake/sound.pm:355 #, c-format msgid "Enable 5.1 sound with Pulse Audio" msgstr "以 PulseAudio 啟用 5.1 音效" #: harddrake/sound.pm:360 #, c-format msgid "Enable user switching for audio applications" msgstr "啟用使用者切換音效應用程式" #: harddrake/sound.pm:365 #, c-format msgid "Reset sound mixer to default values" msgstr "重設混音器為預設值" #: harddrake/sound.pm:370 #, c-format msgid "Trouble shooting" msgstr "疑難排解" #: harddrake/sound.pm:377 #, c-format msgid "No alternative driver" msgstr "沒有其他可供選擇的驅動程式" #: harddrake/sound.pm:378 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "您的音效卡 (%s) 正在使用 \"%s\" 驅動程式,目前沒有其他可供選擇的 OSS/ALSA 驅" "動程式支援它" #: harddrake/sound.pm:385 #, c-format msgid "Sound configuration" msgstr "音效設定" #: harddrake/sound.pm:387 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "您可以選擇使用其他的 (OSS 或者 ALSA) 的驅動程式給您的音效卡 (%s)" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:392 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "您的音效卡現在正在使用 %s\"%s\" 驅動程式 (您的音效卡預設的驅動程式為 \"%s\")" #: harddrake/sound.pm:394 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) 是最早的音效 API。它是一套不依賴於作業系統的音效 API " "(可用於大多數的 UNIX(tm) 系統),但它的功能非常基本且有限。\n" "甚至,OSS 的驅動程式還重新開發已有的功能。\n" "\n" "ALSA (Advanced Linux Sound Architecture) 是一個模組化的架構並且\n" "支援相當多的 ISA、USB 與 PCI 音效卡。\n" "\n" "它同時也提供了一個較 OSS 高階的 API。\n" "\n" "若使用 ALSA,您可以選擇要使用:\n" "- 相容於 OSS 的舊 API\n" "- 提供許多強化的功能但需要使用 ALSA 函式庫的新 ALSA API。\n" #: harddrake/sound.pm:408 harddrake/sound.pm:491 #, c-format msgid "Driver:" msgstr "驅動程式:" #: harddrake/sound.pm:422 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "舊的 \"%s\" 驅動程式已被列入黑名單。\n" "\n" "它曾被回報會導致核心在解除模組時產生 Oops 錯誤。\n" "\n" "於下一次開機時將只會使用新的 \"%s\" 驅動程式。" #: harddrake/sound.pm:430 #, c-format msgid "No open source driver" msgstr "無開放原始碼的驅動程式可用" #: harddrake/sound.pm:431 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "您的音效卡 (%s) 沒有自由的驅動程式,但是有私有的驅動程式於 \"%s\"." #: harddrake/sound.pm:434 #, c-format msgid "No known driver" msgstr "無已知的驅動程式" #: harddrake/sound.pm:435 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)" #: harddrake/sound.pm:450 #, c-format msgid "Sound trouble shooting" msgstr "音效問題排除" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:453 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep -i AUDIO\" will tell you which driver your card " "uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services are configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "傳統的音效除錯與測試是執行以下指令:\n" "\n" "\n" "- \"lspcidrake -v | fgrep -i AUDIO\" 會告訴您您的音效卡預設使用何種驅動程" "式。\n" "\n" "- \"grep sound-slot /etc/modprobe.conf\" 將告訴您正在使用何種驅動程式。\n" "\n" "- \"/sbin/lsmod\" 讓您可以檢查音效模組 (驅動程式) 是否已經載入。\n" "\n" "- \"/sbin/chkconfig --list sound\" 與 \"/sbin/chkconfig --list alsa\" 將\n" "告訴您音效與 ALSA 服務是否被設定為在 initlevel 3 執行。\n" "\n" "- \"aumix -q\" 會告訴您音量是否設為靜音\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" 將指出哪個程式在使用音效卡。\n" #: harddrake/sound.pm:480 #, c-format msgid "Let me pick any driver" msgstr "讓我選擇任何驅動程式" #: harddrake/sound.pm:483 #, c-format msgid "Choosing an arbitrary driver" msgstr "正在選擇任意的驅動程式" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:486 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "如果您真的認為您知道您音效卡應該使用那個驅動程式\n" "您可以在上面的列表中自己選取。\n" "\n" "目前您的音效卡 \"%s\" 使用的驅動程式是 \"%s\"。" #: harddrake/v4l.pm:12 #, c-format msgid "Auto-detect" msgstr "自動偵測" #: harddrake/v4l.pm:97 harddrake/v4l.pm:285 harddrake/v4l.pm:337 #, c-format msgid "Unknown|Generic" msgstr "未知|一般" #: harddrake/v4l.pm:130 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "未知|CPH05X (bt878) [許多廠商]" #: harddrake/v4l.pm:131 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "未知|CPH06X (bt878) [許多廠商]" #: harddrake/v4l.pm:475 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "對於目前大部分的電視卡,GNU/Linux 核心的 bttv 模組都能夠正確的偵測正確的參" "數。\n" "若是無法正確偵測您的電視卡的話,您可以在這邊直接指定正確的電視頻道與電視卡型" "號。若需要的話請直接選擇您的電視卡卡參數。" #: harddrake/v4l.pm:478 #, c-format msgid "Card model:" msgstr "介面卡型號:" #: harddrake/v4l.pm:479 #, c-format msgid "Tuner type:" msgstr "調頻類型:" #: interactive.pm:128 interactive.pm:545 interactive/curses.pm:263 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39 #: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:421 ugtk2.pm:519 #: ugtk2.pm:813 ugtk2.pm:836 #, c-format msgid "Ok" msgstr "確定" #: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156 #, c-format msgid "Yes" msgstr "是的" #: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156 #, c-format msgid "No" msgstr "否" #: interactive.pm:261 #, c-format msgid "Choose a file" msgstr "選擇一個檔案" #: interactive.pm:386 interactive/gtk.pm:436 #, c-format msgid "Add" msgstr "新增" #: interactive.pm:386 interactive/gtk.pm:436 #, c-format msgid "Modify" msgstr "修改" #: interactive.pm:386 interactive/gtk.pm:436 #, c-format msgid "Remove" msgstr "移除" #: interactive.pm:545 interactive/curses.pm:263 ugtk2.pm:519 #, c-format msgid "Finish" msgstr "完成" #: interactive.pm:546 interactive/curses.pm:260 ugtk2.pm:517 #, c-format msgid "Previous" msgstr "上一步" #: interactive/gtk.pm:564 #, c-format msgid "Beware, Caps Lock is enabled" msgstr "注意,已開啟字母大寫(Caps Lock)" #: interactive/stdio.pm:29 interactive/stdio.pm:154 #, c-format msgid "Bad choice, try again\n" msgstr "壞選擇,再試一遍\n" #: interactive/stdio.pm:30 interactive/stdio.pm:155 #, c-format msgid "Your choice? (default %s) " msgstr "您的選擇為?(預設為 %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "您需要輸入的欄位:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "您的選擇為?(0/1,預設為 `%s') " #: interactive/stdio.pm:97 #, c-format msgid "Button `%s': %s" msgstr "按鈕 `%s': %s" #: interactive/stdio.pm:98 #, c-format msgid "Do you want to click on this button?" msgstr "您要按這個按鈕嗎?" #: interactive/stdio.pm:110 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "您的選擇為?(預設為 `%s'%s) " #: interactive/stdio.pm:110 #, c-format msgid " enter `void' for void entry" msgstr " 輸入 `void' 表示空的項目" #: interactive/stdio.pm:128 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> (%s) 上有很多的事物可供選擇。\n" #: interactive/stdio.pm:131 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "請選取前 10 個項目中您要編輯的第一個數字,或者直接按下 Enter 繼續。\n" "您選擇是?" #: interactive/stdio.pm:144 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> 請注意,一個標籤已經變更了:\n" "%s" #: interactive/stdio.pm:151 #, c-format msgid "Re-submit" msgstr "重新送出" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:193 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:210 #, c-format msgid "Andorra" msgstr "安道爾" #: lang.pm:211 timezone.pm:226 #, c-format msgid "United Arab Emirates" msgstr "阿拉伯聯合大公國" #: lang.pm:212 #, c-format msgid "Afghanistan" msgstr "阿富汗" #: lang.pm:213 #, c-format msgid "Antigua and Barbuda" msgstr "安提瓜及巴布達" #: lang.pm:214 #, c-format msgid "Anguilla" msgstr "安圭拉島" #: lang.pm:215 #, c-format msgid "Albania" msgstr "阿爾巴尼亞" #: lang.pm:216 #, c-format msgid "Armenia" msgstr "亞美尼亞" #: lang.pm:217 #, c-format msgid "Netherlands Antilles" msgstr "荷屬安地列斯群島" #: lang.pm:218 #, c-format msgid "Angola" msgstr "安哥拉" #: lang.pm:219 #, c-format msgid "Antarctica" msgstr "南極洲" #: lang.pm:220 timezone.pm:271 #, c-format msgid "Argentina" msgstr "阿根廷" #: lang.pm:221 #, c-format msgid "American Samoa" msgstr "美屬薩摩亞" #: lang.pm:222 mirror.pm:12 timezone.pm:229 #, c-format msgid "Austria" msgstr "奧地利" #: lang.pm:223 mirror.pm:11 timezone.pm:267 #, c-format msgid "Australia" msgstr "澳洲" #: lang.pm:224 #, c-format msgid "Aruba" msgstr "阿魯巴島" #: lang.pm:225 #, c-format msgid "Azerbaijan" msgstr "亞塞拜然" #: lang.pm:226 #, c-format msgid "Bosnia and Herzegovina" msgstr "波士尼亞與赫塞哥維納" #: lang.pm:227 #, c-format msgid "Barbados" msgstr "巴貝多" #: lang.pm:228 timezone.pm:211 #, c-format msgid "Bangladesh" msgstr "孟加拉" #: lang.pm:229 mirror.pm:13 timezone.pm:231 #, c-format msgid "Belgium" msgstr "比利時" #: lang.pm:230 #, c-format msgid "Burkina Faso" msgstr "布吉納法索" #: lang.pm:231 timezone.pm:232 #, c-format msgid "Bulgaria" msgstr "保加利亞" #: lang.pm:232 #, c-format msgid "Bahrain" msgstr "巴林" #: lang.pm:233 #, c-format msgid "Burundi" msgstr "蒲隆地" #: lang.pm:234 #, c-format msgid "Benin" msgstr "貝南" #: lang.pm:235 #, c-format msgid "Bermuda" msgstr "百慕達" #: lang.pm:236 #, c-format msgid "Brunei Darussalam" msgstr "汶萊" #: lang.pm:237 #, c-format msgid "Bolivia" msgstr "玻利維亞" #: lang.pm:238 mirror.pm:14 timezone.pm:272 #, c-format msgid "Brazil" msgstr "巴西" #: lang.pm:239 #, c-format msgid "Bahamas" msgstr "巴哈馬" #: lang.pm:240 #, c-format msgid "Bhutan" msgstr "不丹" #: lang.pm:241 #, c-format msgid "Bouvet Island" msgstr "波維特島" #: lang.pm:242 #, c-format msgid "Botswana" msgstr "波札那" #: lang.pm:243 timezone.pm:230 #, c-format msgid "Belarus" msgstr "白俄羅斯" #: lang.pm:244 #, c-format msgid "Belize" msgstr "貝里斯" #: lang.pm:245 mirror.pm:15 timezone.pm:261 #, c-format msgid "Canada" msgstr "加拿大" #: lang.pm:246 #, c-format msgid "Cocos (Keeling) Islands" msgstr "可可斯群島" #: lang.pm:247 #, c-format msgid "Congo (Kinshasa)" msgstr "剛果 (金夏沙)" #: lang.pm:248 #, c-format msgid "Central African Republic" msgstr "中非共和國" #: lang.pm:249 #, c-format msgid "Congo (Brazzaville)" msgstr "剛果 (布拉柴維爾)" #: lang.pm:250 mirror.pm:39 timezone.pm:255 #, c-format msgid "Switzerland" msgstr "瑞士" #: lang.pm:251 #, c-format msgid "Cote d'Ivoire" msgstr "象牙海岸" #: lang.pm:252 #, c-format msgid "Cook Islands" msgstr "庫克群島" #: lang.pm:253 timezone.pm:273 #, c-format msgid "Chile" msgstr "智利" #: lang.pm:254 #, c-format msgid "Cameroon" msgstr "喀麥隆" #: lang.pm:255 timezone.pm:212 #, c-format msgid "China" msgstr "中國" #: lang.pm:256 #, c-format msgid "Colombia" msgstr "哥倫比亞" #: lang.pm:257 mirror.pm:16 #, c-format msgid "Costa Rica" msgstr "哥斯大黎加" #: lang.pm:258 #, c-format msgid "Serbia & Montenegro" msgstr "塞爾維亞與蒙特內哥羅" #: lang.pm:259 #, c-format msgid "Cuba" msgstr "古巴" #: lang.pm:260 #, c-format msgid "Cape Verde" msgstr "維德角島" #: lang.pm:261 #, c-format msgid "Christmas Island" msgstr "聖誕島" #: lang.pm:262 #, c-format msgid "Cyprus" msgstr "賽普勒斯" #: lang.pm:263 mirror.pm:17 timezone.pm:233 #, c-format msgid "Czech Republic" msgstr "捷克共和國" #: lang.pm:264 mirror.pm:22 timezone.pm:238 #, c-format msgid "Germany" msgstr "德國" #: lang.pm:265 #, c-format msgid "Djibouti" msgstr "吉布地" #: lang.pm:266 mirror.pm:18 timezone.pm:234 #, c-format msgid "Denmark" msgstr "丹麥" #: lang.pm:267 #, c-format msgid "Dominica" msgstr "多米尼克聯邦" #: lang.pm:268 #, c-format msgid "Dominican Republic" msgstr "多明尼加共和國" #: lang.pm:269 #, c-format msgid "Algeria" msgstr "阿爾及利亞" #: lang.pm:270 #, c-format msgid "Ecuador" msgstr "厄瓜多" #: lang.pm:271 mirror.pm:19 timezone.pm:235 #, c-format msgid "Estonia" msgstr "愛沙尼亞" #: lang.pm:272 #, c-format msgid "Egypt" msgstr "埃及" #: lang.pm:273 #, c-format msgid "Western Sahara" msgstr "西撒哈拉" #: lang.pm:274 #, c-format msgid "Eritrea" msgstr "厄利垂亞" #: lang.pm:275 mirror.pm:37 timezone.pm:253 #, c-format msgid "Spain" msgstr "西班牙" #: lang.pm:276 #, c-format msgid "Ethiopia" msgstr "依索比亞" #: lang.pm:277 mirror.pm:20 timezone.pm:236 #, c-format msgid "Finland" msgstr "芬蘭" #: lang.pm:278 #, c-format msgid "Fiji" msgstr "斐濟群島" #: lang.pm:279 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "福克蘭群島" #: lang.pm:280 #, c-format msgid "Micronesia" msgstr "密克羅尼西亞" #: lang.pm:281 #, c-format msgid "Faroe Islands" msgstr "法羅群島" #: lang.pm:282 mirror.pm:21 timezone.pm:237 #, c-format msgid "France" msgstr "法國" #: lang.pm:283 #, c-format msgid "Gabon" msgstr "加彭" #: lang.pm:284 timezone.pm:257 #, c-format msgid "United Kingdom" msgstr "英國" #: lang.pm:285 #, c-format msgid "Grenada" msgstr "格瑞那達" #: lang.pm:286 #, c-format msgid "Georgia" msgstr "喬治亞" #: lang.pm:287 #, c-format msgid "French Guiana" msgstr "法屬幾內亞" #: lang.pm:288 #, c-format msgid "Ghana" msgstr "迦納" #: lang.pm:289 #, c-format msgid "Gibraltar" msgstr "直布羅陀" #: lang.pm:290 #, c-format msgid "Greenland" msgstr "格陵蘭島" #: lang.pm:291 #, c-format msgid "Gambia" msgstr "甘比亞" #: lang.pm:292 #, c-format msgid "Guinea" msgstr "幾內亞" #: lang.pm:293 #, c-format msgid "Guadeloupe" msgstr "瓜德魯普島" #: lang.pm:294 #, c-format msgid "Equatorial Guinea" msgstr "赤道幾內亞" #: lang.pm:295 mirror.pm:23 timezone.pm:239 #, c-format msgid "Greece" msgstr "希臘" #: lang.pm:296 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "南喬治亞與南三明治群島" #: lang.pm:297 timezone.pm:262 #, c-format msgid "Guatemala" msgstr "瓜地馬拉" #: lang.pm:298 #, c-format msgid "Guam" msgstr "關島" #: lang.pm:299 #, c-format msgid "Guinea-Bissau" msgstr "幾內亞比索" #: lang.pm:300 #, c-format msgid "Guyana" msgstr "蓋亞那" #: lang.pm:301 #, c-format msgid "Hong Kong SAR (China)" msgstr "香港特區 (中國)" #: lang.pm:302 #, c-format msgid "Heard and McDonald Islands" msgstr "赫德及麥當勞群島" #: lang.pm:303 #, c-format msgid "Honduras" msgstr "宏都拉斯" #: lang.pm:304 #, c-format msgid "Croatia" msgstr "克羅地亞" #: lang.pm:305 #, c-format msgid "Haiti" msgstr "海地" #: lang.pm:306 mirror.pm:24 timezone.pm:240 #, c-format msgid "Hungary" msgstr "匈牙利" #: lang.pm:307 timezone.pm:215 #, c-format msgid "Indonesia" msgstr "印度尼西亞" #: lang.pm:308 mirror.pm:25 timezone.pm:241 #, c-format msgid "Ireland" msgstr "愛爾蘭" #: lang.pm:309 mirror.pm:26 timezone.pm:217 #, c-format msgid "Israel" msgstr "以色列" #: lang.pm:310 timezone.pm:214 #, c-format msgid "India" msgstr "印度" #: lang.pm:311 #, c-format msgid "British Indian Ocean Territory" msgstr "大不列顛印度洋領土" #: lang.pm:312 #, c-format msgid "Iraq" msgstr "伊拉克" #: lang.pm:313 timezone.pm:216 #, c-format msgid "Iran" msgstr "伊朗" #: lang.pm:314 #, c-format msgid "Iceland" msgstr "冰島" #: lang.pm:315 mirror.pm:27 timezone.pm:242 #, c-format msgid "Italy" msgstr "義大利" #: lang.pm:316 #, c-format msgid "Jamaica" msgstr "牙買加" #: lang.pm:317 #, c-format msgid "Jordan" msgstr "約旦" #: lang.pm:318 mirror.pm:28 timezone.pm:218 #, c-format msgid "Japan" msgstr "日本" #: lang.pm:319 #, c-format msgid "Kenya" msgstr "肯亞" #: lang.pm:320 #, c-format msgid "Kyrgyzstan" msgstr "吉爾吉斯" #: lang.pm:321 #, c-format msgid "Cambodia" msgstr "柬埔寨" #: lang.pm:322 #, c-format msgid "Kiribati" msgstr "吉里巴斯" #: lang.pm:323 #, c-format msgid "Comoros" msgstr "葛摩" #: lang.pm:324 #, c-format msgid "Saint Kitts and Nevis" msgstr "聖克里斯多福" #: lang.pm:325 #, c-format msgid "Korea (North)" msgstr "北韓" #: lang.pm:326 timezone.pm:219 #, c-format msgid "Korea" msgstr "韓國" #: lang.pm:327 #, c-format msgid "Kuwait" msgstr "科威特" #: lang.pm:328 #, c-format msgid "Cayman Islands" msgstr "開曼群島" #: lang.pm:329 #, c-format msgid "Kazakhstan" msgstr "哈薩克" #: lang.pm:330 #, c-format msgid "Laos" msgstr "寮國" #: lang.pm:331 #, c-format msgid "Lebanon" msgstr "黎巴嫩" #: lang.pm:332 #, c-format msgid "Saint Lucia" msgstr "聖露西亞" #: lang.pm:333 #, c-format msgid "Liechtenstein" msgstr "列支敦斯登" #: lang.pm:334 #, c-format msgid "Sri Lanka" msgstr "斯里蘭卡" #: lang.pm:335 #, c-format msgid "Liberia" msgstr "利比利亞" #: lang.pm:336 #, c-format msgid "Lesotho" msgstr "賴索托" #: lang.pm:337 timezone.pm:243 #, c-format msgid "Lithuania" msgstr "立陶宛" #: lang.pm:338 timezone.pm:244 #, c-format msgid "Luxembourg" msgstr "盧森堡" #: lang.pm:339 #, c-format msgid "Latvia" msgstr "拉脫維亞" #: lang.pm:340 #, c-format msgid "Libya" msgstr "利比亞" #: lang.pm:341 #, c-format msgid "Morocco" msgstr "摩洛哥" #: lang.pm:342 #, c-format msgid "Monaco" msgstr "摩納哥" #: lang.pm:343 #, c-format msgid "Moldova" msgstr "摩爾多瓦" #: lang.pm:344 #, c-format msgid "Madagascar" msgstr "馬達加斯加" #: lang.pm:345 #, c-format msgid "Marshall Islands" msgstr "馬紹爾群島" #: lang.pm:346 #, c-format msgid "Macedonia" msgstr "馬其頓" #: lang.pm:347 #, c-format msgid "Mali" msgstr "馬里" #: lang.pm:348 #, c-format msgid "Myanmar" msgstr "緬甸" #: lang.pm:349 #, c-format msgid "Mongolia" msgstr "蒙古" #: lang.pm:350 #, c-format msgid "Northern Mariana Islands" msgstr "北馬里亞納群島" #: lang.pm:351 #, c-format msgid "Martinique" msgstr "馬丁尼克" #: lang.pm:352 #, c-format msgid "Mauritania" msgstr "茅利塔尼亞" #: lang.pm:353 #, c-format msgid "Montserrat" msgstr "蒙瑟拉特島" #: lang.pm:354 #, c-format msgid "Malta" msgstr "馬爾他" #: lang.pm:355 #, c-format msgid "Mauritius" msgstr "模里西斯" #: lang.pm:356 #, c-format msgid "Maldives" msgstr "馬爾地夫" #: lang.pm:357 #, c-format msgid "Malawi" msgstr "馬拉威" #: lang.pm:358 timezone.pm:263 #, c-format msgid "Mexico" msgstr "墨西哥" #: lang.pm:359 timezone.pm:220 #, c-format msgid "Malaysia" msgstr "馬來西亞" #: lang.pm:360 #, c-format msgid "Mozambique" msgstr "莫三比克" #: lang.pm:361 #, c-format msgid "Namibia" msgstr "納米比亞" #: lang.pm:362 #, c-format msgid "New Caledonia" msgstr "新喀里多尼亞群島" #: lang.pm:363 #, c-format msgid "Niger" msgstr "尼日" #: lang.pm:364 #, c-format msgid "Norfolk Island" msgstr "諾福克群島" #: lang.pm:365 #, c-format msgid "Nigeria" msgstr "奈及利亞" #: lang.pm:366 #, c-format msgid "Nicaragua" msgstr "尼加拉瓜" #: lang.pm:367 mirror.pm:29 timezone.pm:245 #, c-format msgid "Netherlands" msgstr "荷蘭" #: lang.pm:368 mirror.pm:31 timezone.pm:246 #, c-format msgid "Norway" msgstr "挪威" #: lang.pm:369 #, c-format msgid "Nepal" msgstr "尼泊爾" #: lang.pm:370 #, c-format msgid "Nauru" msgstr "諾魯" #: lang.pm:371 #, c-format msgid "Niue" msgstr "紐威島" #: lang.pm:372 mirror.pm:30 timezone.pm:268 #, c-format msgid "New Zealand" msgstr "紐西蘭" #: lang.pm:373 #, c-format msgid "Oman" msgstr "阿曼" #: lang.pm:374 #, c-format msgid "Panama" msgstr "巴拿馬" #: lang.pm:375 #, c-format msgid "Peru" msgstr "秘魯" #: lang.pm:376 #, c-format msgid "French Polynesia" msgstr "法屬玻里尼西亞" #: lang.pm:377 #, c-format msgid "Papua New Guinea" msgstr "巴布亞紐幾內亞" #: lang.pm:378 timezone.pm:221 #, c-format msgid "Philippines" msgstr "菲律賓" #: lang.pm:379 #, c-format msgid "Pakistan" msgstr "巴基斯坦" #: lang.pm:380 mirror.pm:32 timezone.pm:247 #, c-format msgid "Poland" msgstr "波蘭" #: lang.pm:381 #, c-format msgid "Saint Pierre and Miquelon" msgstr "聖匹及密啟倫群島" #: lang.pm:382 #, c-format msgid "Pitcairn" msgstr "皮特康" #: lang.pm:383 #, c-format msgid "Puerto Rico" msgstr "波多黎各" #: lang.pm:384 #, c-format msgid "Palestine" msgstr "巴勒斯坦" #: lang.pm:385 mirror.pm:33 timezone.pm:248 #, c-format msgid "Portugal" msgstr "葡萄牙" #: lang.pm:386 #, c-format msgid "Paraguay" msgstr "巴拉圭" #: lang.pm:387 #, c-format msgid "Palau" msgstr "帛琉群島" #: lang.pm:388 #, c-format msgid "Qatar" msgstr "卡達" #: lang.pm:389 #, c-format msgid "Reunion" msgstr "留尼旺" #: lang.pm:390 timezone.pm:249 #, c-format msgid "Romania" msgstr "羅馬尼亞" #: lang.pm:391 mirror.pm:34 #, c-format msgid "Russia" msgstr "蘇俄" #: lang.pm:392 #, c-format msgid "Rwanda" msgstr "盧旺達" #: lang.pm:393 #, c-format msgid "Saudi Arabia" msgstr "沙烏地阿拉伯" #: lang.pm:394 #, c-format msgid "Solomon Islands" msgstr "所羅門群島" #: lang.pm:395 #, c-format msgid "Seychelles" msgstr "塞席爾" #: lang.pm:396 #, c-format msgid "Sudan" msgstr "蘇丹" #: lang.pm:397 mirror.pm:38 timezone.pm:254 #, c-format msgid "Sweden" msgstr "瑞典" #: lang.pm:398 timezone.pm:222 #, c-format msgid "Singapore" msgstr "新加坡" #: lang.pm:399 #, c-format msgid "Saint Helena" msgstr "聖赫勒拿島" #: lang.pm:400 timezone.pm:252 #, c-format msgid "Slovenia" msgstr "斯洛維尼亞" #: lang.pm:401 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "斯瓦巴及尖棉島" #: lang.pm:402 mirror.pm:35 timezone.pm:251 #, c-format msgid "Slovakia" msgstr "斯洛伐克" #: lang.pm:403 #, c-format msgid "Sierra Leone" msgstr "獅子山" #: lang.pm:404 #, c-format msgid "San Marino" msgstr "聖馬利諾" #: lang.pm:405 #, c-format msgid "Senegal" msgstr "塞內加爾" #: lang.pm:406 #, c-format msgid "Somalia" msgstr "索馬利亞" #: lang.pm:407 #, c-format msgid "Suriname" msgstr "蘇里南" #: lang.pm:408 #, c-format msgid "Sao Tome and Principe" msgstr "聖多美普林西比" #: lang.pm:409 #, c-format msgid "El Salvador" msgstr "薩爾瓦多" #: lang.pm:410 #, c-format msgid "Syria" msgstr "敘利亞" #: lang.pm:411 #, c-format msgid "Swaziland" msgstr "史瓦濟蘭" #: lang.pm:412 #, c-format msgid "Turks and Caicos Islands" msgstr "土克斯及開科斯群島" #: lang.pm:413 #, c-format msgid "Chad" msgstr "查德" #: lang.pm:414 #, c-format msgid "French Southern Territories" msgstr "法屬南半球領地" #: lang.pm:415 #, c-format msgid "Togo" msgstr "多哥" #: lang.pm:416 mirror.pm:41 timezone.pm:224 #, c-format msgid "Thailand" msgstr "泰國" #: lang.pm:417 #, c-format msgid "Tajikistan" msgstr "塔吉克" #: lang.pm:418 #, c-format msgid "Tokelau" msgstr "托克勞群島" #: lang.pm:419 #, c-format msgid "East Timor" msgstr "東帝汶" #: lang.pm:420 #, c-format msgid "Turkmenistan" msgstr "土庫曼" #: lang.pm:421 #, c-format msgid "Tunisia" msgstr "突尼西亞" #: lang.pm:422 #, c-format msgid "Tonga" msgstr "東加" #: lang.pm:423 timezone.pm:225 #, c-format msgid "Turkey" msgstr "土耳其" #: lang.pm:424 #, c-format msgid "Trinidad and Tobago" msgstr "千里達及托巴哥" #: lang.pm:425 #, c-format msgid "Tuvalu" msgstr "吐瓦魯" #: lang.pm:426 mirror.pm:40 timezone.pm:223 #, c-format msgid "Taiwan" msgstr "台灣" #: lang.pm:427 timezone.pm:208 #, c-format msgid "Tanzania" msgstr "坦尚尼亞" #: lang.pm:428 timezone.pm:256 #, c-format msgid "Ukraine" msgstr "烏克蘭" #: lang.pm:429 #, c-format msgid "Uganda" msgstr "烏干達" #: lang.pm:430 #, c-format msgid "United States Minor Outlying Islands" msgstr "美屬邊疆群島" #: lang.pm:431 mirror.pm:42 timezone.pm:264 #, c-format msgid "United States" msgstr "美國" #: lang.pm:432 #, c-format msgid "Uruguay" msgstr "烏拉圭" #: lang.pm:433 #, c-format msgid "Uzbekistan" msgstr "烏茲別克" #: lang.pm:434 #, c-format msgid "Vatican" msgstr "梵諦岡" #: lang.pm:435 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "聖文森及格瑞那丁" #: lang.pm:436 #, c-format msgid "Venezuela" msgstr "委內瑞拉" #: lang.pm:437 #, c-format msgid "Virgin Islands (British)" msgstr "英屬維京群島" #: lang.pm:438 #, c-format msgid "Virgin Islands (U.S.)" msgstr "美屬維京群島" #: lang.pm:439 #, c-format msgid "Vietnam" msgstr "越南" #: lang.pm:440 #, c-format msgid "Vanuatu" msgstr "萬那杜" #: lang.pm:441 #, c-format msgid "Wallis and Futuna" msgstr "瓦里斯與富都拿群島" #: lang.pm:442 #, c-format msgid "Samoa" msgstr "薩摩亞群島" #: lang.pm:443 #, c-format msgid "Yemen" msgstr "葉門" #: lang.pm:444 #, c-format msgid "Mayotte" msgstr "美亞特" #: lang.pm:445 mirror.pm:36 timezone.pm:207 #, c-format msgid "South Africa" msgstr "南非" #: lang.pm:446 #, c-format msgid "Zambia" msgstr "尚比亞" #: lang.pm:447 #, c-format msgid "Zimbabwe" msgstr "辛巴威" #: lang.pm:1208 #, c-format msgid "Welcome to %s" msgstr "歡迎使用 %s" #: lvm.pm:84 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:141 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:151 #, c-format msgid "Remove the logical volumes first\n" msgstr "先移除邏輯 volume\n" #: lvm.pm:184 #, c-format msgid "The bootloader can't handle /boot on multiple physical volumes" msgstr "開機載入器無法處理位於多個實體磁區的 /boot" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" #: messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press Enter to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "恭喜您!系統已經完成安裝。\n" "請取出開機媒介並按下 return 以重新開機。\n" "\n" "\n" "要獲得這個 Mandriva Linux 釋出版本可用的修正相關資訊,\n" "請諮詢可用的勘誤表:\n" "\n" "\n" "%s\n" "\n" "\n" "關於如何設定您系統的資訊可以在官方 Mandriva Linux 使用者指南\n" "(Official Mandriva Linux User's Guide) 的安裝後章節 (post install chapter )\n" "裡面找到。" #: modules/interactive.pm:19 #, c-format msgid "This driver has no configuration parameter!" msgstr "這個驅動程式沒有設定參數!" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "模組組態設定" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "您可以在這邊輸入該模組的每一個參數。" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "找到 %s 介面" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "您還有其他的嗎?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "你是否有任何 %s 介面?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "觀看硬體資訊" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "正在安裝 USB 控制器的驅動程式" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "正在安裝 Firewire 控制器的驅動程式 %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "正在安裝硬碟控制器的驅動程式 %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "正在安裝網路卡控制器的驅動程式 %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "正在安裝 %s 卡的驅動程式 %s" #: modules/interactive.pm:110 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "您現在可以為模組 %s 提供選項。\n" "請注意,您輸入的記憶體位置以 0x 開頭,例如 '0x123'" #: modules/interactive.pm:116 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "您現在可以為模組 %s 提供選項。\n" "選項的格式為 ``name=value name2=value2 ...''\n" "例如 ``io=0x300 irq=7''" #: modules/interactive.pm:118 #, c-format msgid "Module options:" msgstr "模組選項:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:131 #, c-format msgid "Which %s driver should I try?" msgstr "我應該試那個 %s 驅動程式呢?" #: modules/interactive.pm:140 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "某些時候, %s 驅動程式需要有附加的資訊以便適當工作,\n" "雖然它正常來說可以沒有他們而好好的工作. 您想要指定附加的選項給它嗎\n" "或是允許驅動程式偵測您的機器需要取得驅動程式需要的資訊?有時候偵測會讓電腦當" "機, 不過應該不至於造成任何傷害才對." #: modules/interactive.pm:144 #, c-format msgid "Autoprobe" msgstr "自動偵測" #: modules/interactive.pm:144 #, c-format msgid "Specify options" msgstr "指定選項" #: modules/interactive.pm:156 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "載入 %s 模組失敗.\n" "您要用其他參數再試一次嗎?" #: partition_table.pm:409 #, c-format msgid "mount failed: " msgstr "掛載失敗:" #: partition_table.pm:518 #, c-format msgid "Extended partition not supported on this platform" msgstr "這個平台並不支援延伸分割區" #: partition_table.pm:536 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "您的硬碟分割表中有一個空洞,我無法使用。\n" "唯一的解決方法是將您的主分割區的位置搬移,讓這些空洞與延伸分割區相鄰。" #: partition_table/raw.pm:285 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "您的磁碟發生了一個嚴重的錯誤。\n" "資料完整性檢測失敗。\n" "這表示寫入任何東西到磁碟將會導致錯亂的、損壞的資料。" #: pkgs.pm:228 pkgs.pm:231 pkgs.pm:240 #, c-format msgid "Unused packages removal" msgstr "" #: pkgs.pm:228 #, c-format msgid "Finding unused hardware packages..." msgstr "" #: pkgs.pm:231 #, c-format msgid "Finding unused localization packages..." msgstr "" #: pkgs.pm:241 #, c-format msgid "" "We have detected that some packages are not needed for your system " "configuration." msgstr "" #: pkgs.pm:242 #, c-format msgid "We will remove the following packages, unless you choose otherwise:" msgstr "" #: pkgs.pm:245 pkgs.pm:246 #, fuzzy, c-format msgid "Unused hardware support" msgstr "啟用音效支援" #: pkgs.pm:249 pkgs.pm:250 #, c-format msgid "Unused localization" msgstr "" #: raid.pm:42 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "無法在 _已格式_ 化的磁碟陣列 %s 中加入分割區" #: raid.pm:157 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "分割區數目不足以用來設定成為階層 %d 的磁碟陣列\n" #: scanner.pm:95 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "無法建立目錄 /usr/share/sane/firmware!" #: scanner.pm:106 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "無法建立連結 /usr/share/sane/%s!" #: scanner.pm:113 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "無法複製韌體檔 %s 到 /usr/share/sane/firmware!" #: scanner.pm:120 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "無法設定韌體檔 %s 的權限!" #: scanner.pm:200 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "無法安裝分享掃描器所需的套件。" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "您的掃描器將只供擁有管理者權限的使用者使用。" #: security/help.pm:11 #, c-format msgid "Accept bogus IPv4 error messages." msgstr "接收偽造的 IPv4 錯誤訊息。" #: security/help.pm:13 #, c-format msgid "Accept broadcasted icmp echo." msgstr "接收廣播的 icmp 回應。" #: security/help.pm:15 #, c-format msgid "Accept icmp echo." msgstr "接收 icmp 回應。" #: security/help.pm:17 #, c-format msgid "Allow autologin." msgstr "允許自動登入。" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to \"None\", no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow reboot by the console user." msgstr "允許 console 使用者重新開機。" #: security/help.pm:29 #, c-format msgid "Allow remote root login." msgstr "允許遠端 root 登入。" #: security/help.pm:31 #, c-format msgid "Allow direct root login." msgstr "允許 root 直接登入。" #: security/help.pm:33 #, c-format msgid "" "Allow the list of users on the system on display managers (kdm and gdm)." msgstr "允許把系統上的使用者列在顯示管理員 (kdm 與 gdm) 上。" #: security/help.pm:35 #, c-format msgid "" "Allow to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow X connections:\n" "\n" "- \"All\" (all connections are allowed),\n" "\n" "- \"Local\" (only connection from local machine),\n" "\n" "- \"None\" (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "這個參數指定了客戶端是否受到授權可以由網路上透過 TCP 埠 6000\n" "連到這個 X 伺服器上。" #. -PO: here "ALL", "Local" and "None" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"Local\"\n" "\n" "- none if set to \"None\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server.<SERVER_LEVEL>.\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable syslog reports to console 12" msgstr "啟用系統日誌回報到 console 12 上" #: security/help.pm:79 #, c-format msgid "" "Enable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 #, c-format msgid "Security Alerts:" msgstr "安全警示:" #: security/help.pm:82 #, c-format msgid "Enable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable libsafe if libsafe is found on the system." msgstr "若在系統上找到 libsafe 則啟用 libsafe。" #: security/help.pm:86 #, c-format msgid "Enable the logging of IPv4 strange packets." msgstr "啟用記錄異常的 IPv4 封包。" #: security/help.pm:88 #, c-format msgid "Enable msec hourly security check." msgstr "啟用 msec 定時安全檢查。" #: security/help.pm:90 #, c-format msgid "" "Enable su only from members of the wheel group. If set to no, allows su from " "any user." msgstr "" "啟用 su 只能讓 wheel 群組成員使用。如果設定為 no,則允許任何使用者使用 su。" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "使用密碼來驗證使用者。" #: security/help.pm:94 #, c-format msgid "Activate ethernet cards promiscuity check." msgstr "啟用網路卡混用檢查。" #: security/help.pm:96 #, c-format msgid "Activate daily security check." msgstr "啟用每日安全性檢查。" #: security/help.pm:98 #, c-format msgid "Enable sulogin(8) in single user level." msgstr "在單一使用者模式啟用 sulogin(8)。" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "設定密碼記錄長度來防止重複使用密碼。" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "設定密碼的最小長度、最少的數字數及大寫字母數。" #: security/help.pm:108 #, c-format msgid "Set the root's file mode creation mask." msgstr "設定 root 的檔案模式建立遮罩。" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "如果設定為 yes,檢查開啟的連接埠。" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "如果設定為 yes,檢查:\n" "\n" "- 空白密碼、\n" "\n" "- 在 /etc/shadow 中沒有密碼、\n" "\n" "- 並非 root 但使用者 ID 卻為 0。" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "如果設定為 yes,檢查使用者家目錄下的檔案權限。" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "如果設定為 yes,檢查網路裝置是否處於混雜模式。" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "如果設定為 yes,執行每日安全性檢查。" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "如果設定為 yes,檢查 /etc/shadow 內的空白密碼。" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "如果設定為 yes,回報不屬於任何人的檔案。" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "如果設定為 yes,檢查可以被任何人寫入的檔案/目錄。" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "如果設定為 yes,執行 chkrootkit 檢查。" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "如果有設定就傳送郵件報告給這個電子郵件地址,否則就傳送給 root。" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "如果設定為 yes,以郵件回報檢查結果。" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "如果沒有任何警示就不要傳送郵件" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "如果設定為 yes,對 RPM 資料庫進行一些檢查。" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "如果設定為 yes,回報檢查結果到系統日誌。" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "如果設定為 yes,回報檢查結果到 tty。" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "設定 shell 命令歷史記錄的大小。-1 代表沒有限制。" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "設定 shell 逾時時間。0 代表永不逾時。" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "逾時時間單位為秒" #: security/help.pm:138 #, c-format msgid "Set the user's file mode creation mask." msgstr "設定使用者的檔案模式建立遮罩。" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "接受偽造的 IPv4 錯誤訊息" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "接收廣播的 icmp 回應" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "接收 icmp 回應" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* 已經存在" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "console 使用者重開機" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "允許遠端 root 登入" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "直接 root 登入" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "在顯示管理員 (kdm 與 gdm) 上列出使用者" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "當由 root 傳遞到其他使用者時,匯出顯示" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "允許 X Window 連線" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "授權 TCP 連線到 X Window" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "授權所有由 tcp_wrappers 控制的服務" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig 遵從 msec 規則" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "為使用者啟用 \"crontab\" 與 \"at\"" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "系統日誌回報到 console 12" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "名稱解析偽造保護" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "啟用 IP 偽造保護" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "若在系統上找到 libsafe 則啟用 libsafe" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "啟用記錄奇怪的 IPv4 封包。" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "啟用 msec 定時安全性檢查" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members" msgstr "啟用 su 只能讓 wheel 群組成員使用" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "使用密碼來認證使用者" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "每日安全檢查" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) 於單一使用者層級" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "不設定密碼期限給" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "設定密碼過期與帳號停用延遲" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "密碼紀錄長度" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "密碼的最小長度、最少的數字數、及大寫字母數" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Root umask" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Shell 歷史記錄長度" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Shell 啟動逾時" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "使用者 umask" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "檢查開放的連線埠" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "檢查不安全的帳號" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "檢查使用者家目錄下的檔案權限" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "執行每日安全檢查" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "檢查 sgid 檔案的新增/移除" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "檢查 /etc/shadow 內的空白密碼" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "驗證 suid/sgid 檔案的 checksum" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "檢查 suid root 檔案的新增/移除" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "回報不屬於任何人的檔案" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "檢查可以被任何人寫入的檔案/目錄" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "執行 chkrootkit 檢查" #: security/l10n.pm:57 #, c-format msgid "Do not send empty mail reports" msgstr "不要傳送空白的郵件報告" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "如果有設定就傳送郵件報告給這個電子郵件地址,否則就傳送給 root。" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "以郵件回報檢查結果" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "對 RPM 資料庫進行一些檢查" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "回報檢查結果到系統日誌" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "回報檢查結果到 tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "劣" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "差" #: security/level.pm:12 #, c-format msgid "Standard" msgstr "標準" #: security/level.pm:13 #, c-format msgid "High" msgstr "高" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "較高" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "嚴密" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "把安全層級設定在這個等級時必須要非常謹慎,它會讓您的系統容易使用卻極易受到\n" "破壞。這個設定不應該被用在有連線其他機器或網際網路的主機上,因為它沒有密碼\n" "保護。" #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "已啟動密碼認證功能,但仍然不建議將此系統運作於網路上網路環境。" #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "標準的系統安全性設定,建議用在作為網際網路客戶端的主機上使用。" #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "包含了相關存取限制,以及每日定期系統稽核檢查動作。" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "在這個安全層級之下,這個系統可以作為一個伺服器來使用。\n" "它的安全性已經高到足以作為一個可以接受許多客戶端連線的伺服器。\n" "請注意:如果您的機器只是用來作為一個網際網路的客戶端,您應該選擇一個較低的安" "全層級。" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "與上一個模式相同, 不過整個系統幾乎都是封閉的。系統整個安全設定機制都是在最嚴" "密的狀態。" #: security/level.pm:55 #, c-format msgid "Security" msgstr "安全性" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec 基本參數選項" #: security/level.pm:58 #, c-format msgid "Please choose the desired security level" msgstr "請選擇您希望的安全層級" #. -PO: this string is used to properly format "<security level>: <level description>" #: security/level.pm:62 #, c-format msgid "%s: %s" msgstr "" #: security/level.pm:66 #, c-format msgid "Use libsafe for servers" msgstr "啟用「libsafe」防護功能" #: security/level.pm:67 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "能夠偵測防禦緩衝區溢位與格式化字串這類攻擊的程式庫套件。" #: security/level.pm:68 #, c-format msgid "Security Administrator:" msgstr "安全性管理者:" #: security/level.pm:69 #, c-format msgid "Login or email:" msgstr "" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "啟動 ALSA (Advanced Linux Sound Architecture) 音效系統" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "提供週期性的命令排程程式" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd 被用來監督電池狀態, 以及呼叫 syslog 紀錄相關狀態.\n" "它也被用來自動呼叫關機程式進行關機動作, 當電池電源不夠時." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "atd 服務程式, 能夠讓您在在命令列指定某個時間執行某個程式。" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron 是個標準 unix 系統程式, 能夠提供使用者定期執行特定程式。\n" "vixie 版本的 cron 增加了許多功能, \n" "在安全性與設定方面能夠更彈性好用。" #: services.pm:28 #, c-format msgid "" "Common UNIX Printing System (CUPS) is an advanced printer spooling system" msgstr "" #: services.pm:29 #, c-format msgid "Launches the graphical display manager" msgstr "啟動圖形顯示管理員" #: services.pm:30 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "FAM 是一個檔案監控系統程式。它是用來在檔案變動時提供回報。\n" "GNOME 及 KDE 都有用到它" #: services.pm:32 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM 能夠讓系統在文字模式下驅動顯示出滑鼠游標, 能夠在 Midnight Commander\n" "這類程式中所使用。另外還能夠支援在文字模式下螢幕文字的剪貼複製功能。" #: services.pm:35 #, c-format msgid "HAL is a daemon that collects and maintains information about hardware" msgstr "" #: services.pm:36 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake 程式會進行硬體偵測動作, 以便於設定新加入或者是有變更過\n" "的週邊裝置。" #: services.pm:38 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "Apache 是一個提供 Web 服務的程式, 提供架設 Web Server 讓使用者瀏覽。" #: services.pm:39 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "internet superserver daemon (一般稱呼為 inetd), 它代為像是 telnet、ftp,\n" "rsh、rlogin 等等這類服務的監聽, 然後有連線請求時, 在實際呼叫提供服務的\n" "程式進行後續交談溝通的動作。關閉這個項目, 仰賴於這個服務代為監聽啟動的\n" "項目將會無法使用" #: services.pm:43 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "啟動 Linux Kernel 2.2 系列的防火牆機制, 用來保護您的機器不會遭受\n" "外來的網路攻擊。" #: services.pm:45 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "這個服務項目將會載入\n" "/etc/sysconfig/keyboard\n" "檔案的鍵盤對應設定組態。\n" "您可以事後使用 kdbconfig 程式來設定。\n" "一般來說, 目前大部分機器並不需要這個項目。" #: services.pm:48 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "自動重新產生 kernel header 於 /boot 給\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:50 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "系統開機時能夠自動偵測週邊裝置的狀態並且設定。" #: services.pm:51 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "Linuxconf 程式會在開機時偵測一些項目, 調整維護系統一些組態設定。" #: services.pm:53 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd 服務程式是 lpr 程式運作上不可缺的程式。若是要架設列印服務伺服器\n" "的話, lpd 是很常見的選擇。" #: services.pm:55 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "Linux Virtual Server, 用來架設一個高效能與高效率的 LVS 伺服器。" #: services.pm:57 #, c-format msgid "" "DBUS is a daemon which broadcasts notifications of system events and other " "messages" msgstr "" #: services.pm:58 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) 適用來提供 Domain Name Server (DNS) 服務的程式, \n" "用來解析主機名稱與 IP 對應的關係。" #: services.pm:59 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "掛載與卸下所有網路檔案系統, 比方像是 網路檔案系統(NFS), SMB, \n" "NCP (NetWare) 這類。" #: services.pm:61 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "在系統開機時, 選擇啟動網路功能, 或者是關閉不啟動該服務。" #: services.pm:63 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n" "這個服務項目會依照系統的 /etc/exports 檔案設定來啟動 NFS 分享功能。" #: services.pm:66 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n" "這個服務提供 NFS 檔案分享時的鎖定機制。" #: services.pm:68 #, c-format msgid "Synchronizes system time using the Network Time Protocol (NTP)" msgstr "" #: services.pm:69 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "自動開關 numlock key 鎖在開機時於 console\n" "與 Xorg." #: services.pm:71 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "支援 OKI 4w 以及 WindowsPrinter 印表機。" #: services.pm:72 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA 支援, 一般是用來讓筆記型電腦的網路卡、Modem 驅動所設計。\n" "一般來說, 要額外設定好 PCMCIA 後才會真正啟動 PCMCIA 服務, 因此\n" "就算是系統不需要這個功能, 預先啟動他也不會有任何影響。" #: services.pm:75 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper 程式管理了 RPC 連線, 一般用於 NFS 與 NIS 通訊協定內。\n" "若是您系統要使用到 RPC 相關服務, 您就必須啟動它。" #: services.pm:78 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "Postfix 是一個郵件傳送代理程式, 用來投遞信件提供 SMTP 服務。" #: services.pm:79 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "儲存與回存高品質系統亂數產生器" #: services.pm:81 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "給 block 這類區塊裝置指派 raw 裝置 (就像是硬碟的分割區), \n" "給 oracle 或 DVD 播放器這類程式使用。" #: services.pm:83 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "routed 服務程式允許透過 RIP 通訊協定來更新路由表的資訊。\n" "一般來說, RIP 是給小型網路用途使用。" #: services.pm:86 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat 通訊協定, 能夠讓位於網路上的使用者接收到網路上任何一台\n" "主機的運作效能資訊。" #: services.pm:88 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers 通訊協定, 能夠讓位於網路上的使用者得知那些使用者登入在那些\n" "機器上" #: services.pm:90 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "rwho 通訊協定, 能夠讓遠端的使用者獲得該機器上所有登入在主機上的\n" "使用找 (類似於 finger)。" #: services.pm:92 #, c-format msgid "" "SANE (Scanner Access Now Easy) enables to access scanners, video cameras, ..." msgstr "" #: services.pm:93 #, c-format msgid "" "The SMB/CIFS protocol enables to share access to files & printers and also " "integrates with a Windows Server domain" msgstr "" #: services.pm:94 #, c-format msgid "Launch the sound system on your machine" msgstr "在您的系統上啟動音效服務系統" #: services.pm:95 #, c-format msgid "" "Secure Shell is a network protocol that allows data to be exchanged over a " "secure channel between two computers" msgstr "" #: services.pm:96 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "syslog 服務程式能夠讓系統許多服務程式用紀錄檔案來回應系統\n" "所發生一些事情。建議您一定要啟動 syslog 服務程式" #: services.pm:98 #, c-format msgid "Load the drivers for your usb devices." msgstr "載入 usb 裝置所需要的驅動程式" #: services.pm:99 #, c-format msgid "Starts the X Font Server." msgstr "啟動 X 字型伺服器。" #: services.pm:100 #, c-format msgid "Starts other deamons on demand." msgstr "" #: services.pm:123 #, c-format msgid "Printing" msgstr "列印" #: services.pm:124 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:127 #, c-format msgid "File sharing" msgstr "檔案分享" #: services.pm:129 #, c-format msgid "System" msgstr "系統" #: services.pm:134 #, c-format msgid "Remote Administration" msgstr "遠端管理" #: services.pm:142 #, c-format msgid "Database Server" msgstr "資料庫軟體" #: services.pm:153 services.pm:189 #, c-format msgid "Services" msgstr "服務" #: services.pm:153 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "選擇希望在下一次開機時啟動的服務程式項目" #: services.pm:171 #, c-format msgid "Services: %d activated for %d registered" msgstr "服務:%2$d 個註冊的服務中已經啟動了 %1$d 個" #: services.pm:205 #, c-format msgid "running" msgstr "執行中" #: services.pm:205 #, c-format msgid "stopped" msgstr "未啟動" #: services.pm:210 #, c-format msgid "Services and daemons" msgstr "服務程式" #: services.pm:216 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "抱歉 ! 這個服務項目並沒有\n" "額外的相關資訊。" #: services.pm:221 ugtk2.pm:923 #, c-format msgid "Info" msgstr "資訊" #: services.pm:224 #, c-format msgid "Start when requested" msgstr "要求時啟動" #: services.pm:224 #, c-format msgid "On boot" msgstr "開機自動載入" #: services.pm:242 #, c-format msgid "Start" msgstr "啟動" #: services.pm:242 #, c-format msgid "Stop" msgstr "停止" #: standalone.pm:25 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, " "USA.\n" msgstr "" "本程式是自由軟體,您可以遵照自由軟體基金會 (Free Software Foundation) 出版" "的\n" "GNU 通用公共許可證條款 (GNU General Public License) 第二版來修改和重新發佈\n" "這一程式,或者自由選擇使用任何更新的版本。\n" "\n" "發佈這一程式的目的是希望它有用,但沒有任何擔保。甚至沒有適合特定目的而隱含的" "擔保。\n" "更詳細的情況請參閱 GNU 通用公共許可證。\n" "\n" "您應該已經和程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有,寫信給:\n" " Free Software Foundation,\n" " 51 Franklin Street, Fifth Floor,\n" " Boston, MA 02110-1301, USA.\n" #: standalone.pm:44 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:56 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:61 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" #: standalone.pm:67 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:73 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:88 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:100 #, c-format msgid "[keyboard]" msgstr "[鍵盤]" #: standalone.pm:101 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:102 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:112 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:117 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:118 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:154 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: timezone.pm:161 timezone.pm:162 #, c-format msgid "All servers" msgstr "全部伺服器" #: timezone.pm:196 #, c-format msgid "Global" msgstr "全球" #: timezone.pm:199 #, c-format msgid "Africa" msgstr "非洲" #: timezone.pm:200 #, c-format msgid "Asia" msgstr "亞洲" #: timezone.pm:201 #, c-format msgid "Europe" msgstr "歐洲" #: timezone.pm:202 #, c-format msgid "North America" msgstr "北美洲" #: timezone.pm:203 #, c-format msgid "Oceania" msgstr "大洋洲" #: timezone.pm:204 #, c-format msgid "South America" msgstr "南美洲" #: timezone.pm:213 #, c-format msgid "Hong Kong" msgstr "香港" #: timezone.pm:250 #, c-format msgid "Russian Federation" msgstr "俄羅斯聯邦" #: timezone.pm:258 #, c-format msgid "Yugoslavia" msgstr "南斯拉夫" #: ugtk2.pm:813 #, c-format msgid "Is this correct?" msgstr "這樣子正確嗎?" #: ugtk2.pm:873 #, c-format msgid "No file chosen" msgstr "未選擇檔案" #: ugtk2.pm:875 #, c-format msgid "You have chosen a file, not a directory" msgstr "您選擇了檔案而非目錄" #: ugtk2.pm:877 #, c-format msgid "You have chosen a directory, not a file" msgstr "您選擇了目錄而非檔案" #: ugtk2.pm:879 #, c-format msgid "No such directory" msgstr "無此目錄" #: ugtk2.pm:879 #, c-format msgid "No such file" msgstr "無此檔案" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s 沒有安裝\n" "要安裝點選 \"Next 下一步\" 或 \"Cancel 取消\" 離開" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "安裝失敗" #~ msgid "LILO/grub Installation" #~ msgstr "LILO/GRUB 安裝" #~ msgid "Precise RAM size if needed (found %d MB)" #~ msgstr "若有需要的話,請輸入正確的記憶體大小 (找到 %d MB)" #~ msgid "Give the ram size in MB" #~ msgstr "輸入記憶體大小 (以 MB 為單位)" #~ msgid "" #~ "If you plan to use aboot, be careful to leave a free space (2048 sectors " #~ "is enough)\n" #~ "at the beginning of the disk" #~ msgstr "" #~ "如果您打算使用 aboot 程式的話,請注意您至少需要在磁碟最前端保留一塊可用的" #~ "空間 (2048 扇區就足夠了)" #~ msgid "Security level" #~ msgstr "安全層級" #~ msgid "Expand Tree" #~ msgstr "展開樹狀結構" #~ msgid "Collapse Tree" #~ msgstr "縮疊樹狀結構" #~ msgid "Toggle between flat and group sorted" #~ msgstr "切換是否依照群組來加以排序" #~ msgid "Choose action" #~ msgstr "選擇動作" #~ msgid "Active Directory with SFU:" #~ msgstr "支援 SFU 的 Active Directory:" #~ msgid "Active Directory with Winbind:" #~ msgstr "支援 Winbind 的 Active Directory:" #~ msgid "" #~ "Winbind allows the system to authenticate users in a Windows Active " #~ "Directory Server." #~ msgstr "" #~ "Winbind 允許這個系統在 Windows Active Directory 伺服器上認證使用者。" #~ msgid "Authentication LDAP" #~ msgstr "LDAP 認證" #~ msgid "TLS" #~ msgstr "TLS" #~ msgid "SSL" #~ msgstr "SSL" #~ msgid "security layout (SASL/Kerberos)" #~ msgstr "安全性配置 (SASL/Kerberos)" #~ msgid "Authentication Active Directory" #~ msgstr "Active Directory 認證" #~ msgid "LDAP users database" #~ msgstr "LDAP 使用者資料庫" #~ msgid "LDAP user allowed to browse the Active Directory" #~ msgstr "LDAP 使用者將被被允許瀏覽 Active Directory" #~ msgid "Password for user" #~ msgstr "使用者密碼" #~ msgid "Authentication NIS" #~ msgstr "NIS 認證" #~ msgid "" #~ "For this to work for a W2K PDC, you will probably need to have the admin " #~ "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" #~ "add and reboot the server.\n" #~ "You will also need the username/password of a Domain Admin to join the " #~ "machine to the Windows(TM) domain.\n" #~ "If networking is not yet enabled, Drakx will attempt to join the domain " #~ "after the network setup step.\n" #~ "Should this setup fail for some reason and domain authentication is not " #~ "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows" #~ "(tm) Domain, and Admin Username/Password, after system boot.\n" #~ "The command 'wbinfo -t' will test whether your authentication secrets are " #~ "good." #~ msgstr "" #~ "要能夠在 W2K PDC 下正常使用,您或許需要使用管理者權限在 Windows 主機那邊執" #~ "行:C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" #~ "add然後重新啟動伺服器。\n" #~ "您另外還需要網域管理者帳號密碼以便於能夠加入機器到 Windows(TM) 網域內。\n" #~ "如果網路沒有被啟用,DrakX 程式會於網路設定步驟後企圖加入網域若是這樣設定失" #~ "敗且網域認證莫名其妙不能作用的話,執行'smbpasswd -j DOMAIN -U USER%%" #~ "PASSWORD' 指令,其中的 DOMAIN 為你的 Windows(tm) 網域名稱,USER 與 " #~ "PASSWORD 為管理者的帳號與密碼。\n" #~ "最後使用 'wbinfo -t' 測試確認認證功能是否可以正常工作。" #~ msgid "Authentication Windows Domain" #~ msgstr "Windows 網域認證" #~ msgid "Undo" #~ msgstr "復原" #~ msgid "Save partition table" #~ msgstr "寫入硬碟分割表" #~ msgid "Restore partition table" #~ msgstr "回存硬碟分割表" #~ msgid "" #~ "The backup partition table has not the same size\n" #~ "Still continue?" #~ msgstr "" #~ "備份的硬碟分割表有不一樣的大小\n" #~ "要繼續嗎?" #~ msgid "Info: " #~ msgstr "資訊:" #~ msgid "Unknown driver" #~ msgstr "未知的驅動程式" #~ msgid "Error reading file %s" #~ msgstr "讀取檔案 %s 時發生錯誤" #~ msgid "Restoring from file %s failed: %s" #~ msgstr "試圖從檔案 %s 恢復時發生錯誤:%s" #~ msgid "Bad backup file" #~ msgstr "壞掉的備份檔案" #~ msgid "Error writing to file %s" #~ msgstr "寫入檔案 %s 時發生錯誤" #~ msgid "Error: The \"%s\" driver for your sound card is unlisted" #~ msgstr "錯誤:您的音效卡驅動程式 \"%s\" 不在列表中" #~ msgid "Ext2" #~ msgstr "Ext2" #~ msgid "Journalised FS" #~ msgstr "日誌式檔案系統 (JFS)" #~ msgid "Starts the X Font Server (this is mandatory for Xorg to run)." #~ msgstr "啟動 X Font Server (這是為了 Xorg 執行一定要的)." #~ msgid "Add user" #~ msgstr "新增使用者" #~ msgid "Accept user" #~ msgstr "接受使用者" #~ msgid "No supermount" #~ msgstr "不使用 supermount" #~ msgid "Supermount" #~ msgstr "Supermount" #~ msgid "Supermount except for CDROM drives" #~ msgstr "在光碟機以外的裝置使用 supermount" #~ msgid "Rescue partition table" #~ msgstr "搶救硬碟分割表" #~ msgid "Removable media automounting" #~ msgstr "自動掛載可移除式裝置" #~ msgid "Trying to rescue partition table" #~ msgstr "正在試圖救回硬碟分割表" #~ msgid "Accept/Refuse bogus IPv4 error messages." #~ msgstr "接收/拒絕偽造的 IPv4 錯誤訊息。" #~ msgid "Accept/Refuse broadcasted icmp echo." #~ msgstr "接收/拒絕廣播的 icmp 回應。" #~ msgid "Accept/Refuse icmp echo." #~ msgstr "接收/拒絕 icmp 回應。" #~ msgid "Allow/Forbid remote root login." #~ msgstr "允許/禁止遠端 root 登入。" #~ msgid "Enable/Disable libsafe if libsafe is found on the system." #~ msgstr "若在系統上找到 libsafe 則啟用/停用 libsafe。" #~ msgid "Enable/Disable the logging of IPv4 strange packets." #~ msgstr "啟用/停用記錄奇怪的 IPv4 封包。" #~ msgid "Number of capture buffers:" #~ msgstr "擷取緩衝的數量:" #~ msgid "PLL setting:" #~ msgstr "PLL 設定:" #~ msgid "Radio support:" #~ msgstr "音效支援:"