# translation of zh_TW.po to 繁體中文 # translation of zh_TW.po to Chinese Traditional # translation of DrakX-zh_TW.po to Chinese Traditional # drakbootdisk messages in Traditional Chinese # Copyright (C) 2000, 2003, 2004 Free Software Foundation, Inc. # Platin , 2000 # Kenduest Lee , 2002 # Danny Zeng , 2000. # Joe Man , 2001. # Chong Sein Yeo , 2003. # Hilbert , 2003, 2004. # Hilbert , 2004. # hilbert , 2004. # Shiva Huang , 2005. # Shiva Huang , 2005. # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2005-04-21 14:27+0200\n" "PO-Revision-Date: 2005-03-19 13:18+0800\n" "Last-Translator: Shiva Huang \n" "Language-Team: Traditional Chinese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.3.1\n" "X-Poedit-Language: Chinese\n" "X-Poedit-Country: TAIWAN\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "您想要格式化那一個 USB 隨身碟？" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "您正要格式化 USB 裝置 \"%s\"。這將會刪除它裡面所有的資料。\n" "請確認這個選取的裝置是您要格式化的 USB 隨身碟。\n" "我們建議您在進行這個動作的時候移除所有其它的 USB 儲存裝置。" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "無法寫入隨身碟" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "您的 USB 隨身碟似乎有防寫保護。請先移除它，解除防寫保護之\n" "後重新接到電腦上。" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "重試" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "不用 USB key 而繼續" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "您的 USB 隨身碟似乎有防寫保護，但是我們現在無法安全的移除它。\n" "\n" "\n" "請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n" "新插入隨身碟，最後重新啟動 Mandrake Move。" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320 #, c-format msgid "Reboot" msgstr "重新開機" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "需要一個隨身碟來儲存您的資料" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "再次偵測到 USB 隨身碟" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "設定 USB 隨身碟" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "請稍候，正在將系統設定檔設定於 USB 隨身碟上..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "請輸入您的使用者資訊，密碼將會用於螢幕保護程式的解除密碼" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "自動設定" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "請稍候，正在偵測與設定裝置中..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 #: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401 #: diskdrake/interactive.pm:419 diskdrake/interactive.pm:555 #: diskdrake/interactive.pm:560 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182 #: install_any.pm:1699 install_any.pm:1722 install_steps.pm:82 #: install_steps_interactive.pm:38 interactive/http.pm:117 #: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 #: network/netconnect.pm:1001 network/netconnect.pm:1131 #: network/netconnect.pm:1135 network/netconnect.pm:1139 #: network/netconnect.pm:1144 network/netconnect.pm:1273 #: network/netconnect.pm:1277 network/netconnect.pm:1339 #: network/netconnect.pm:1344 network/netconnect.pm:1364 #: network/netconnect.pm:1575 printer/printerdrake.pm:244 #: printer/printerdrake.pm:251 printer/printerdrake.pm:276 #: printer/printerdrake.pm:422 printer/printerdrake.pm:427 #: printer/printerdrake.pm:440 printer/printerdrake.pm:450 #: printer/printerdrake.pm:514 printer/printerdrake.pm:641 #: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399 #: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481 #: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499 #: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672 #: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680 #: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787 #: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805 #: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924 #: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042 #: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069 #: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089 #: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247 #: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042 #: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596 #: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604 #: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309 #: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592 #: standalone/drakTermServ:392 standalone/drakTermServ:746 #: standalone/drakTermServ:753 standalone/drakTermServ:772 #: standalone/drakTermServ:991 standalone/drakTermServ:1467 #: standalone/drakTermServ:1472 standalone/drakTermServ:1479 #: standalone/drakTermServ:1491 standalone/drakTermServ:1512 #: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1126 standalone/drakbackup:1159 #: standalone/drakbackup:1674 standalone/drakbackup:1830 #: standalone/drakbackup:2429 standalone/drakbackup:4117 #: standalone/drakbackup:4337 standalone/drakclock:124 #: standalone/drakconnect:683 standalone/drakconnect:687 #: standalone/drakconnect:692 standalone/drakconnect:707 #: standalone/drakfloppy:297 standalone/drakfloppy:300 #: standalone/drakfloppy:306 standalone/drakfont:209 standalone/drakfont:222 #: standalone/drakfont:260 standalone/draksplash:21 standalone/draksplash:507 #: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121 #, c-format msgid "Error" msgstr "錯誤" #: ../move/move.pm:605 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "發生了一個錯誤, 但我不知道該如何妥善處置它.\n" "要繼續安裝工作的話請小心." #: ../move/move.pm:660 install_steps_interactive.pm:38 #, c-format msgid "An error occurred" msgstr "發生一個錯誤" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "移除系統設定檔案" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "簡單地重新開機" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "您只能以沒有 CDROM 支援下跑" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "殺死那些程式" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "沒有 CDROM 支援" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 #: diskdrake/interactive.pm:1038 diskdrake/interactive.pm:1048 #: diskdrake/interactive.pm:1101 #, c-format msgid "Read carefully!" msgstr "詳細閱讀！" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "您可以在下列程式執行時使用別台光碟機：\n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "正在複製到記憶體中以便退出光碟" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB 或者更多" #: Xconfig/card.pm:159 #, c-format msgid "X server" msgstr "X 伺服器" #: Xconfig/card.pm:160 #, c-format msgid "Choose an X server" msgstr "選取一個 X 伺服器" #: Xconfig/card.pm:192 #, c-format msgid "Multi-head configuration" msgstr "多頭端(Multi-head)設定" #: Xconfig/card.pm:193 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "您的系統支援多頭端(multiple head)設定組態.\n" "您打算怎麼做呢?" #: Xconfig/card.pm:262 #, c-format msgid "Can not install Xorg package: %s" msgstr "無法安裝 Xorg 套件: %s" #: Xconfig/card.pm:272 #, c-format msgid "Select the memory size of your graphics card" msgstr "選擇顯示卡上的記憶體大小" #: Xconfig/card.pm:349 #, c-format msgid "Xorg configuration" msgstr "Xorg 設定" #: Xconfig/card.pm:351 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "您想要有哪一個 Xorg 設定?" #: Xconfig/card.pm:384 #, c-format msgid "Configure all heads independently" msgstr "獨立設定所有頭端(head)" #: Xconfig/card.pm:385 #, c-format msgid "Use Xinerama extension" msgstr "使用 Xinerama 延伸" #: Xconfig/card.pm:390 #, c-format msgid "Configure only card \"%s\"%s" msgstr "僅設定 \"%s\"%s 卡" #: Xconfig/card.pm:402 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:409 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s 含 3D 硬體加速功能" #: Xconfig/card.pm:411 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "您的顯示卡搭配 Xorg %s 有 3D 硬體加速功能." #: Xconfig/card.pm:417 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s 搭配實驗性質 3D 硬體加速" #: Xconfig/card.pm:419 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n" "但是請注意，這是實驗性質的支援項目，而且可能會凍結您的電腦。" #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921 #, c-format msgid "Custom" msgstr "自訂" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 printer/printerdrake.pm:744 #: printer/printerdrake.pm:4401 printer/printerdrake.pm:4853 #: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:229 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "離開" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "顯示卡" #: Xconfig/main.pm:120 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "螢幕" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288 #, c-format msgid "Resolution" msgstr "解析度" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "測試" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakfont:491 standalone/drakfont:553 #, c-format msgid "Options" msgstr "選項" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "您的 Xorg 設定檔已損毀，我們將忽略它。" #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "保留目前的變更？\n" "目前的組態是：\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor for head #%d" msgstr "選取一個螢幕給頭端(head) #%d" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "選取一個螢幕" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "隨插即用" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "一般" #: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53 #: standalone/harddrake2:87 #, c-format msgid "Vendor" msgstr "廠商" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "隨插即用 Plug'n Play 偵測失敗, 請選擇正確的螢幕" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "這兩個重要的參數是您螢幕的垂直更新頻率，以及最重要\n" "的水平更新頻率，前者是您整個螢幕影像更新的頻率，\n" "後者是電子槍掃描的速率。\n" "\n" "特別重要的是，不要設定一個超過您正在用的螢幕\n" "同步範圍的螢幕：您可能傷害您的螢幕。\n" "若您不確定的話，請選擇保守一點的設定值。" #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "水平更新頻率" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "垂直更新頻率" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 色 (8 位元)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "3 萬 2 千色 (15 位元)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "6 萬 5 千色 (16 位元)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "1 千 6 百萬色 (24 位元)" #: Xconfig/resolution_and_depth.pm:129 #, c-format msgid "Resolutions" msgstr "解析度" #: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1612 standalone/drakperm:251 #, c-format msgid "Other" msgstr "其他" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Choose the resolution and the color depth" msgstr "選取解析度以及顏色深度" #: Xconfig/resolution_and_depth.pm:360 #, c-format msgid "Graphics card: %s" msgstr "顯示卡：%s" #: Xconfig/resolution_and_depth.pm:374 interactive.pm:433 #: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:319 interactive/newt.pm:421 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:199 standalone/drakTermServ:490 #: standalone/drakbackup:1376 standalone/drakbackup:3974 #: standalone/drakbackup:4034 standalone/drakbackup:4078 #: standalone/drakconnect:166 standalone/drakconnect:885 #: standalone/drakconnect:972 standalone/drakconnect:1071 #: standalone/drakfont:574 standalone/drakfont:586 standalone/drakperm:310 #: standalone/drakroam:387 standalone/draksplash:167 standalone/drakups:212 #: standalone/net_monitor:345 ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:909 #: ugtk2.pm:932 #, c-format msgid "Ok" msgstr "確定" #: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89 #: help.pm:444 install_steps_gtk.pm:484 install_steps_interactive.pm:422 #: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/newt.pm:425 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3676 #: standalone/drakautoinst:217 standalone/drakbackup:1376 #: standalone/drakbackup:3900 standalone/drakbackup:3904 #: standalone/drakbackup:3962 standalone/drakconnect:165 #: standalone/drakconnect:970 standalone/drakconnect:1070 #: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741 #: standalone/drakperm:310 standalone/draksplash:167 standalone/drakups:219 #: standalone/logdrake:174 standalone/net_monitor:344 ugtk2.pm:403 #: ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:909 #, c-format msgid "Cancel" msgstr "取消" #: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153 #: install_steps_gtk.pm:232 install_steps_gtk.pm:633 interactive.pm:528 #: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:284 #: standalone/drakbackup:3896 standalone/drakbug:104 #: standalone/drakconnect:161 standalone/drakconnect:246 #: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 #: ugtk2.pm:1041 ugtk2.pm:1042 #, c-format msgid "Help" msgstr "輔助說明" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "設定值測試" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "您想要測試設定值嗎？" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "警告：測試這張顯示卡時可能會凍結您的系統" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "發生了一個錯誤：\n" "%s\n" "請試著改變某些參數" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "%d 秒後離開" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "這是正確的設定值嗎？" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "鍵盤布局： %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "滑鼠種類： %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "滑鼠裝置： %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "螢幕： %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "螢幕水平更新頻率： %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "螢幕垂直更新頻率： %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "顯示卡： %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "顯示卡繪圖記憶體： %s kB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "色深： %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "解析度： %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Xorg 驅動程式： %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "開機時啟動圖形介面" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "我可以設定您的電腦在開機時自動啟動圖形介面 (Xorg)，\n" "您希望在重新開機時啟動 Xorg？" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "您的顯示卡似乎有支援 TV-OUT 連接裝置。\n" "所以這張顯示卡能用 frame-buffer 工作。\n" "\n" "若是要使用的話，您需要在重新開機之前連接您的顯示卡與電視。\n" "然後選擇 \"TVout\" 這個開機載入項目\n" "\n" "您要使用這項功能嗎？" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "您的電視用什麼標準？" #: Xconfig/xfree.pm:627 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481 #: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:236 #: standalone/service_harddrake:204 #, c-format msgid "Please wait" msgstr "請稍候" #: any.pm:143 #, c-format msgid "Bootloader installation in progress" msgstr "開機載入器安裝中" #: any.pm:154 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:165 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "開機程式安裝失敗, 發生如下之錯誤：" #: any.pm:171 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "您也許需要改變您的 Open Firmware 上面的開機裝置設定, \n" "以便於開啟開機啟動程式的功能。如果您開機時並沒有開到\n" "開機程式的任何訊息, 於重新開機時按住 Command-Option-O-F, \n" "然後輸入: setenv boot-device %s,\\\\:tbxi\n" "然後再輸入: shut-down\n" "然後你下一次開機時應該就可以看到開機啟動程式的訊息了。" #: any.pm:209 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "您決定要將開機載入器安裝於分割區上面.\n" "這意旨你已經有一個開機載入器於你開機的硬碟上\n" "(比方 System Commander).\n" "\n" "您正用那顆硬碟開機呢?" #: any.pm:232 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "硬碟的第一個扇區 (MBR)" #: any.pm:233 #, c-format msgid "First sector of the root partition" msgstr "根分隔區的第一扇區" #: any.pm:235 #, c-format msgid "On Floppy" msgstr "在軟碟機" #: any.pm:237 help.pm:739 printer/printerdrake.pm:4061 #, c-format msgid "Skip" msgstr "略過" #: any.pm:241 #, c-format msgid "LILO/grub Installation" msgstr "LILO/GRUB 安裝" #: any.pm:242 #, c-format msgid "Where do you want to install the bootloader?" msgstr "您要將開機載入器安裝在那裡?" #: any.pm:268 standalone/drakboot:307 #, c-format msgid "Boot Style Configuration" msgstr "開機樣式組態設定" #: any.pm:270 any.pm:302 #, c-format msgid "Bootloader main options" msgstr "開機載入器主要選項" #: any.pm:274 #, c-format msgid "Give the ram size in MB" msgstr "輸入記憶體大小 (以 MB 為單位)" #: any.pm:276 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無用" #: any.pm:277 any.pm:610 authentication.pm:182 #, c-format msgid "The passwords do not match" msgstr "密碼不符合" #: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1291 #, c-format msgid "Please try again" msgstr "請再試一次" #: any.pm:282 any.pm:305 #, c-format msgid "Bootloader to use" msgstr "要用的開機載入器" #: any.pm:284 any.pm:307 #, c-format msgid "Boot device" msgstr "開機裝置" #: any.pm:286 #, c-format msgid "Delay before booting default image" msgstr "在開機到預設的影像前的延遲" #: any.pm:287 #, c-format msgid "Enable ACPI" msgstr "啟用 ACPI" #: any.pm:289 #, c-format msgid "Force no APIC" msgstr "強制無 APIC" #: any.pm:291 #, c-format msgid "Force No Local APIC" msgstr "強制無本地端 APIC" #: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:680 printer/printerdrake.pm:1663 #: printer/printerdrake.pm:1784 standalone/drakbackup:1656 #: standalone/drakbackup:3503 standalone/drakups:299 #, c-format msgid "Password" msgstr "密碼" #: any.pm:294 any.pm:638 authentication.pm:188 #, c-format msgid "Password (again)" msgstr "密碼 (再一次)" #: any.pm:295 #, c-format msgid "Restrict command line options" msgstr "限制命令列選項" #: any.pm:295 #, c-format msgid "restrict" msgstr "限制" #: any.pm:297 #, c-format msgid "Clean /tmp at each boot" msgstr "每次開機時清理 /tmp" #: any.pm:298 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "需要的話, 輸入精確的記憶體大小 (找到 %d MB)" #: any.pm:306 #, c-format msgid "Init Message" msgstr "啟動訊息" #: any.pm:308 #, c-format msgid "Open Firmware Delay" msgstr "開啟 Firmware 延遲" #: any.pm:309 #, c-format msgid "Kernel Boot Timeout" msgstr "核心啟動時間逾時" #: any.pm:310 #, c-format msgid "Enable CD Boot?" msgstr "允許 CD 開機?" #: any.pm:311 #, c-format msgid "Enable OF Boot?" msgstr "允許 OF 開機?" #: any.pm:312 #, c-format msgid "Default OS?" msgstr "預設 OS?" #: any.pm:365 #, c-format msgid "Image" msgstr "影像" #: any.pm:366 any.pm:376 #, c-format msgid "Root" msgstr "根目錄" #: any.pm:367 any.pm:389 #, c-format msgid "Append" msgstr "附加" #: any.pm:369 standalone/drakboot:309 standalone/drakboot:313 #, c-format msgid "Video mode" msgstr "視訊模式" #: any.pm:371 #, c-format msgid "Initrd" msgstr "" #: any.pm:372 #, c-format msgid "Network profile" msgstr "網路 profile" #: any.pm:381 any.pm:386 any.pm:388 #, c-format msgid "Label" msgstr "標籤" #: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84 #: standalone/drakfloppy:90 standalone/draksec:52 #, c-format msgid "Default" msgstr "預設" #: any.pm:390 #, c-format msgid "Initrd-size" msgstr "Initrd-大小" #: any.pm:392 #, c-format msgid "NoVideo" msgstr "" #: any.pm:403 #, c-format msgid "Empty label not allowed" msgstr "標籤空白不被允許" #: any.pm:404 #, c-format msgid "You must specify a kernel image" msgstr "您需要指定一個核心影像" #: any.pm:404 #, c-format msgid "You must specify a root partition" msgstr "您需要指定一個 root 分割區" #: any.pm:405 #, c-format msgid "This label is already used" msgstr "這個標籤已經被用過了" #: any.pm:419 #, c-format msgid "Which type of entry do you want to add?" msgstr "您要新增哪一類的項目?" #: any.pm:420 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:420 #, c-format msgid "Other OS (SunOS...)" msgstr "其他作業系統 (SunOS...)" #: any.pm:421 #, c-format msgid "Other OS (MacOS...)" msgstr "其他作業系統 (MacOS...)" #: any.pm:421 #, c-format msgid "Other OS (Windows...)" msgstr "其他作業系統 (Windows...)" #: any.pm:449 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "到此為止有這些選項於您的開機選單.\n" "您可以建立多的選項或修改既有的選項." #: any.pm:596 #, c-format msgid "access to X programs" msgstr "存取 X 程式" #: any.pm:597 #, c-format msgid "access to rpm tools" msgstr "存取 rpm 工具程式" #: any.pm:598 #, c-format msgid "allow \"su\"" msgstr "允許 \"su\"" #: any.pm:599 #, c-format msgid "access to administrative files" msgstr "存取管理權限的的檔案" #: any.pm:600 #, c-format msgid "access to network tools" msgstr "存取網路工具" #: any.pm:601 #, c-format msgid "access to compilation tools" msgstr "存取編譯工具" #: any.pm:606 #, c-format msgid "(already added %s)" msgstr "( %s 已經加入)" #: any.pm:611 #, c-format msgid "This password is too simple" msgstr "這密碼太簡單了" #: any.pm:612 #, c-format msgid "Please give a user name" msgstr "請輸入使用者名稱" #: any.pm:613 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "使用者名稱只能含有小寫英文字母, 數字, `-' 與 `_'" #: any.pm:614 #, c-format msgid "The user name is too long" msgstr "這個使用者名稱太長了" #: any.pm:615 #, c-format msgid "This user name has already been added" msgstr "這個使用者早就已經被加入過了" #: any.pm:619 #, c-format msgid "Add user" msgstr "新增使用者" #: any.pm:620 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "輸入一位使用者\n" "%s" #: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:4853 #: standalone/drakbackup:2716 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "完成" #: any.pm:624 help.pm:51 #, c-format msgid "Accept user" msgstr "接受使用者" #: any.pm:635 #, c-format msgid "Real name" msgstr "真實名稱" #: any.pm:636 standalone/drakbackup:1651 #, c-format msgid "Login name" msgstr "登入名稱" #: any.pm:639 #, c-format msgid "Shell" msgstr "命令殼" #: any.pm:641 #, c-format msgid "Icon" msgstr "圖示" #: any.pm:688 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "自動登入" #: any.pm:689 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統." #: any.pm:690 help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "您想要使用這個功能嗎?" #: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887 #: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743 #: standalone/drakbackup:2516 standalone/drakgw:287 standalone/drakgw:288 #: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 #: standalone/harddrake2:310 standalone/net_applet:309 ugtk2.pm:908 #: wizards.pm:156 wizards2.pm:158 #, c-format msgid "Yes" msgstr "是的" #: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444 #: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71 #: standalone/drakbackup:2516 standalone/draksec:54 standalone/harddrake2:311 #: standalone/net_applet:305 ugtk2.pm:908 wizards.pm:156 wizards2.pm:158 #, c-format msgid "No" msgstr "否" #: any.pm:692 #, c-format msgid "Choose the default user:" msgstr "選取預設的使用者:" #: any.pm:693 #, c-format msgid "Choose the window manager to run:" msgstr "選取您想使用的視窗管理員:" #: any.pm:706 #, c-format msgid "Please choose a language to use." msgstr "請選擇要使用那個語系." #: any.pm:707 #, c-format msgid "Language choice" msgstr "語言選擇" #: any.pm:733 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrakelinux 能支援多種語言. 選擇您想安裝的語言.\n" "他們將可使用於您的安裝完成與您重新開始您的系統之後." #: any.pm:752 any.pm:773 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "預設使用 Unicode" #: any.pm:753 help.pm:647 #, c-format msgid "All languages" msgstr "所有語言" #: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947 #, c-format msgid "Country / Region" msgstr "國家/地區" #: any.pm:795 #, c-format msgid "Please choose your country." msgstr "請選擇您的國家." #: any.pm:797 #, c-format msgid "Here is the full list of available countries" msgstr "以下是全部可用的所有的國家清單" #: any.pm:798 #, c-format msgid "Other Countries" msgstr "其他國家" #: any.pm:806 #, c-format msgid "Input method:" msgstr "輸入方式:" #: any.pm:807 install_any.pm:422 network/netconnect.pm:181 #: network/netconnect.pm:372 network/netconnect.pm:377 #: network/netconnect.pm:1330 printer/printerdrake.pm:105 #: printer/printerdrake.pm:2199 #, c-format msgid "None" msgstr "無" #: any.pm:921 #, c-format msgid "No sharing" msgstr "不分享" #: any.pm:921 #, c-format msgid "Allow all users" msgstr "允許所有使用者" #: any.pm:925 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "您要允許使用者能夠分享他們自己的目錄嗎?\n" "若是要開放將允許使用者能在 konqueror 或者是 nautilus 內\n" "點選 \"Share\"\n" "\n" "\"Custom\" 允許每一個使用者粒度.\n" #: any.pm:937 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "NFS: 傳統 Unix 檔案分享系統, 跟著少的 Mac 與 Windows 支援." #: any.pm:940 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "SMB: 一個 Windows, Mac OS X 與許多先進的 Linux 系統用的檔案分享系統." #: any.pm:948 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "您能夠用 NFS 或者是 SMB 匯出. 請選擇您想要用那一個." #: any.pm:973 #, c-format msgid "Launch userdrake" msgstr "啟動 userdrake" #: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903 #: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905 #: printer/printerdrake.pm:5162 standalone/drakTermServ:294 #: standalone/drakbackup:4096 standalone/drakbug:126 standalone/drakfont:497 #: standalone/drakroam:234 standalone/net_monitor:123 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "關閉" #: any.pm:975 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "每個使用者的分享都是使用 \"fileshare\" 群組.\n" "您可以執行 userdrake 在該群組內加入使用者." #: authentication.pm:24 #, c-format msgid "Local file" msgstr "本地端檔案" #: authentication.pm:25 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:26 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:27 #, c-format msgid "Smart Card" msgstr "" #: authentication.pm:28 authentication.pm:153 #, c-format msgid "Windows Domain" msgstr "Windows 網域" #: authentication.pm:29 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:30 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:56 #, c-format msgid "Local file:" msgstr "本地端檔案:" #: authentication.pm:56 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:57 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:57 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:58 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:58 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:59 #, c-format msgid "Windows Domain:" msgstr "Windows 網域：" #: authentication.pm:59 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:60 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:60 authentication.pm:61 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "" #: authentication.pm:61 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:86 #, c-format msgid "Authentication LDAP" msgstr "LDAP 認證" #: authentication.pm:87 #, c-format msgid "LDAP Base dn" msgstr "" #: authentication.pm:88 share/compssUsers.pl:101 #, c-format msgid "LDAP Server" msgstr "LDAP 伺服器" #: authentication.pm:101 fsedit.pm:21 #, c-format msgid "simple" msgstr "簡單" #: authentication.pm:102 #, c-format msgid "TLS" msgstr "" #: authentication.pm:103 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:104 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "安全性佈置 (SASL/Kerberos)" #: authentication.pm:111 authentication.pm:149 #, c-format msgid "Authentication Active Directory" msgstr "Active Directory 認證" #: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "網域" #: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:81 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "伺服器" #: authentication.pm:115 #, c-format msgid "LDAP users database" msgstr "LDAP 使用者資料庫" #: authentication.pm:116 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:117 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:118 #, c-format msgid "Password for user" msgstr "使用者密碼" #: authentication.pm:119 #, c-format msgid "Encryption" msgstr "加密" #: authentication.pm:130 #, c-format msgid "Authentication NIS" msgstr "NIS 認證" #: authentication.pm:131 #, c-format msgid "NIS Domain" msgstr "NIS 網域" #: authentication.pm:132 #, c-format msgid "NIS Server" msgstr "NIS 伺服器" #: authentication.pm:137 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "要能夠在 W2K PDC 下正常使用, 您或許需要使用管理者權限在 Windows 主機那邊執行:" "C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add然後" "重新啟動伺服器.\n" "您另外還需要網域管理者帳號密碼以便於能夠加入機器到 Windows(TM) 網域內.\n" "如果網路沒有被啟用, DrakX 程式會於網路設定步驟後企圖加入網域若是這樣設定失敗" "且網域認證莫名其妙不能作用的話, 執行'smbpasswd -j DOMAIN -U USER%%PASSWORD' " "指令, 其中的 DOMAIN 為你的Windows(tm)網域名稱, USER 與 PASSWORD 為管理者的帳" "號與密碼.\n" "最後使用 'wbinfo -t' 測試確認認證功能是否可以正常工作." #: authentication.pm:149 #, c-format msgid "Authentication Windows Domain" msgstr "Windows 網域認證" #: authentication.pm:154 #, c-format msgid "Domain Admin User Name" msgstr "網域管理使用者名稱" #: authentication.pm:155 #, c-format msgid "Domain Admin Password" msgstr "網域管理密碼" #: authentication.pm:156 #, c-format msgid "Use Idmap for store UID/SID " msgstr "使用 ldmap 來儲存 UID/SID" #: authentication.pm:157 #, c-format msgid "Default Idmap " msgstr "預設 Idmap" #: authentication.pm:171 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "設定管理者 (root) 密碼與網路認證方式" #: authentication.pm:172 #, c-format msgid "Set administrator (root) password" msgstr "設定管理者 (root) 密碼" #: authentication.pm:173 standalone/drakvpn:1125 #, c-format msgid "Authentication method" msgstr "認證方式" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:178 help.pm:722 #, c-format msgid "No password" msgstr "沒有密碼" #: authentication.pm:184 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "這個密碼太短了 (一定至少要有 %d 個字元才行)" #: authentication.pm:189 network/netconnect.pm:377 network/netconnect.pm:681 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492 #, c-format msgid "Authentication" msgstr "認證方式" #: authentication.pm:302 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "沒有 NIS 網域無法使用廣播 (broadcast)" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:752 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "歡迎使用作業系統選擇程式！\n" "\n" "請由上面的清單中選擇一個作業系統或者\n" "稍待由預設的作業系統開機。\n" "\n" #: bootloader.pm:839 #, c-format msgid "LILO with graphical menu" msgstr "LILO 圖形介面選單" #: bootloader.pm:840 #, c-format msgid "LILO with text menu" msgstr "LILO 文字選單" #: bootloader.pm:841 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:842 #, c-format msgid "Yaboot" msgstr "" #: bootloader.pm:906 #, c-format msgid "not enough room in /boot" msgstr "/boot 沒有足夠的空間" #: bootloader.pm:1348 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "您不能把開機載入程式安裝在 %s 分割區上\n" #: bootloader.pm:1393 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新" #: bootloader.pm:1408 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\"" #: bootloader.pm:1409 #, c-format msgid "Re-install Boot Loader" msgstr "重新安裝開機載入程式" #: common.pm:139 #, c-format msgid "KB" msgstr "KB" #: common.pm:139 #, c-format msgid "MB" msgstr "MB" #: common.pm:139 #, c-format msgid "GB" msgstr "GB" #: common.pm:147 #, c-format msgid "TB" msgstr "TB" #: common.pm:155 #, c-format msgid "%d minutes" msgstr "%d 分鐘" #: common.pm:157 #, c-format msgid "1 minute" msgstr "1 分鐘" #: common.pm:159 #, c-format msgid "%d seconds" msgstr "%d 秒" #: common.pm:254 #, c-format msgid "kdesu missing" msgstr "kdesu 遺失" #: common.pm:257 #, c-format msgid "consolehelper missing" msgstr "consolehelper 遺失" #: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "澳洲" #: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "澳洲" #: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:51 #, c-format msgid "Belgium" msgstr "比利時" #: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "巴西" #: crypto.pm:18 crypto.pm:52 lang.pm:230 #, c-format msgid "Canada" msgstr "加拿大" #: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881 #: network/adsl_consts.pm:890 network/adsl_consts.pm:901 #, c-format msgid "Switzerland" msgstr "Switzerland" #: crypto.pm:20 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "哥斯大黎加" #: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "捷克共和國" #: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "德國" #: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "丹麥" #: crypto.pm:24 crypto.pm:55 lang.pm:256 #, c-format msgid "Estonia" msgstr "愛沙尼亞" #: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749 #: network/adsl_consts.pm:760 network/adsl_consts.pm:771 #: network/adsl_consts.pm:782 network/adsl_consts.pm:791 #: network/adsl_consts.pm:800 network/adsl_consts.pm:809 #: network/adsl_consts.pm:818 network/adsl_consts.pm:827 #: network/adsl_consts.pm:836 network/adsl_consts.pm:845 #: network/adsl_consts.pm:854 network/adsl_consts.pm:863 #, c-format msgid "Spain" msgstr "西班牙" #: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "芬蘭" #: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:48 #, c-format msgid "France" msgstr "法國" #: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "希臘" #: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "匈牙利" #: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "愛爾蘭" #: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "以色列" #: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "義大利" #: crypto.pm:33 crypto.pm:64 lang.pm:303 #, c-format msgid "Japan" msgstr "日本" #: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:49 #, c-format msgid "Netherlands" msgstr "荷蘭" #: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "挪威" #: crypto.pm:36 crypto.pm:66 lang.pm:357 #, c-format msgid "New Zealand" msgstr "紐西蘭" #: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "波蘭" #: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "葡萄牙" #: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "蘇俄" #: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872 #, c-format msgid "Sweden" msgstr "瑞典" #: crypto.pm:41 crypto.pm:71 lang.pm:387 #, c-format msgid "Slovakia" msgstr "Slovakia" #: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910 #, c-format msgid "Thailand" msgstr "泰國" #: crypto.pm:43 crypto.pm:76 lang.pm:411 #, c-format msgid "Taiwan" msgstr "台灣" #: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "南非" #: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52 #, c-format msgid "United States" msgstr "美國" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "新增" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "卸載" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "掛載" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:443 #: diskdrake/interactive.pm:667 diskdrake/interactive.pm:686 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "掛載點" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "請輸入 WevDAV 主機 URL" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL 格式必須為 http:// 或是 https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "伺服器：" #: diskdrake/dav.pm:110 diskdrake/interactive.pm:518 #: diskdrake/interactive.pm:1184 diskdrake/interactive.pm:1259 #, c-format msgid "Mount point: " msgstr "掛載點：" #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1266 #, c-format msgid "Options: %s" msgstr "選項： %s" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "Please make a backup of your data first" msgstr "請您先備份您的資料" #: diskdrake/hd_gtk.pm:98 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空" "間 (2048 扇區就足夠了)" #: diskdrake/hd_gtk.pm:155 help.pm:530 #, c-format msgid "Wizard" msgstr "精靈" #: diskdrake/hd_gtk.pm:188 #, c-format msgid "Choose action" msgstr "選擇動作" #: diskdrake/hd_gtk.pm:192 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "您有一個很大的 Microsoft Windows 分割區。\n" "建議您先重新改變這個分割區的大小\n" "(點選它，然後按 \"重新改變大小\")" #: diskdrake/hd_gtk.pm:194 #, c-format msgid "Please click on a partition" msgstr "請點選一個分割區" #: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:486 #: standalone/drakbackup:2951 standalone/drakbackup:3011 #, c-format msgid "Details" msgstr "詳細資訊" #: diskdrake/hd_gtk.pm:254 #, c-format msgid "No hard drives found" msgstr "找不到硬碟裝置" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Journalised FS" msgstr "日誌式檔案系統 (JFS)" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1199 #, c-format msgid "Empty" msgstr "空白" #: diskdrake/hd_gtk.pm:343 #, c-format msgid "Filesystem types:" msgstr "檔案系統格式：" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``%s'' instead" msgstr "用 ``%s'' 代替" #: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:467 #, c-format msgid "Create" msgstr "建立" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 #: diskdrake/interactive.pm:444 diskdrake/interactive.pm:620 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:107 standalone/harddrake2:116 #, c-format msgid "Type" msgstr "格式" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452 #: standalone/drakperm:124 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "刪除" #: diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``Unmount'' first" msgstr "要先 ``Unmount''" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose another partition" msgstr "選擇另一個分割區" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose a partition" msgstr "選擇一個分割區" #: diskdrake/interactive.pm:220 #, c-format msgid "Exit" msgstr "離開" #: diskdrake/interactive.pm:253 help.pm:530 #, c-format msgid "Undo" msgstr "復原" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to normal mode" msgstr "切換到一般模式" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to expert mode" msgstr "切換到專家模式" #: diskdrake/interactive.pm:272 #, c-format msgid "Continue anyway?" msgstr "無論如何都要繼續嗎？" #: diskdrake/interactive.pm:275 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "您應該格式化分割區 %s。\n" "否則掛載點 %s 的資訊將不會寫入 fstab 中。\n" "仍然要離開嗎？" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without saving" msgstr "不儲存就離開" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without writing the partition table?" msgstr "放棄寫入硬碟分割表就離開？" #: diskdrake/interactive.pm:287 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？" #: diskdrake/interactive.pm:294 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "您必須重新開機以使更動過的硬碟分割表生效" #: diskdrake/interactive.pm:307 help.pm:530 #, c-format msgid "Clear all" msgstr "全部清除" #: diskdrake/interactive.pm:308 help.pm:530 #, c-format msgid "Auto allocate" msgstr "自動分配" #: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:122 #, c-format msgid "More" msgstr "更多" #: diskdrake/interactive.pm:314 #, c-format msgid "Hard drive information" msgstr "硬碟資訊" #: diskdrake/interactive.pm:346 #, c-format msgid "All primary partitions are used" msgstr "主分割區數目已經全被用了" #: diskdrake/interactive.pm:347 #, c-format msgid "I can not add any more partitions" msgstr "我無法再新增任何分割區了" #: diskdrake/interactive.pm:348 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區" #: diskdrake/interactive.pm:357 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:358 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:359 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:365 help.pm:530 #, c-format msgid "Save partition table" msgstr "寫入硬碟分割表" #: diskdrake/interactive.pm:366 help.pm:530 #, c-format msgid "Restore partition table" msgstr "回存硬碟分割表" #: diskdrake/interactive.pm:367 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "搶救硬碟分割表" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Reload partition table" msgstr "重新載入硬碟分割表" #: diskdrake/interactive.pm:371 #, c-format msgid "Removable media automounting" msgstr "可移除式裝置自動掛載" #: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410 #, c-format msgid "Select file" msgstr "選擇檔案" #: diskdrake/interactive.pm:396 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "備份的硬碟分割表有不一樣的大小\n" "要繼續嗎？" #: diskdrake/interactive.pm:425 #, c-format msgid "Trying to rescue partition table" msgstr "正在試圖救回硬碟分割表" #: diskdrake/interactive.pm:431 #, c-format msgid "Detailed information" msgstr "詳細資訊" #: diskdrake/interactive.pm:446 diskdrake/interactive.pm:761 #, c-format msgid "Resize" msgstr "重新變更大小" #: diskdrake/interactive.pm:447 #, c-format msgid "Format" msgstr "格式化" #: diskdrake/interactive.pm:449 #, c-format msgid "Add to RAID" msgstr "加入到磁碟陣列" #: diskdrake/interactive.pm:450 #, c-format msgid "Add to LVM" msgstr "加入到 LVM" #: diskdrake/interactive.pm:453 #, c-format msgid "Remove from RAID" msgstr "由磁碟陣列中移除" #: diskdrake/interactive.pm:454 #, c-format msgid "Remove from LVM" msgstr "由 LVM 中移除" #: diskdrake/interactive.pm:455 #, c-format msgid "Modify RAID" msgstr "變更磁碟陣列" #: diskdrake/interactive.pm:456 #, c-format msgid "Use for loopback" msgstr "作為 loopback" #: diskdrake/interactive.pm:511 #, c-format msgid "Create a new partition" msgstr "建立新的分割區" #: diskdrake/interactive.pm:514 #, c-format msgid "Start sector: " msgstr "開始的磁區：" #: diskdrake/interactive.pm:516 diskdrake/interactive.pm:918 #, c-format msgid "Size in MB: " msgstr "大小 (MB):" #: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919 #, c-format msgid "Filesystem type: " msgstr "檔案系統格式：" #: diskdrake/interactive.pm:522 #, c-format msgid "Preference: " msgstr "偏好設定：" #: diskdrake/interactive.pm:525 #, c-format msgid "Logical volume name " msgstr "邏輯磁區名稱" #: diskdrake/interactive.pm:555 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "您無法建立新的分割區\n" "(因為您已經達到主分割區的最大值)。\n" "您需要先移除一個主分割區然後建立一個延伸分割區。" #: diskdrake/interactive.pm:585 #, c-format msgid "Remove the loopback file?" msgstr "移除 loopback 檔案？" #: diskdrake/interactive.pm:604 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:616 #, c-format msgid "Change partition type" msgstr "改變分割區格式" #: diskdrake/interactive.pm:617 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "您要用那一種檔案系統？" #: diskdrake/interactive.pm:625 #, c-format msgid "Switching from ext2 to ext3" msgstr "由 ext2 正在切換到 ext3" #: diskdrake/interactive.pm:654 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "您要把 loopback 檔案 %s 掛載在那裡？" #: diskdrake/interactive.pm:655 #, c-format msgid "Where do you want to mount device %s?" msgstr "您要把這個裝置 %s 掛載在那裡？" #: diskdrake/interactive.pm:660 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "因為這個分割區被用作 loop back 使用，所以無法解除\n" "這個掛載點。請先取消 loopback 的設定" #: diskdrake/interactive.pm:685 #, c-format msgid "Where do you want to mount %s?" msgstr "您要將 %s 掛載在那裡？" #: diskdrake/interactive.pm:709 diskdrake/interactive.pm:792 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "正在重設大小" #: diskdrake/interactive.pm:709 #, c-format msgid "Computing FAT filesystem bounds" msgstr "正在計算 FAT 分割區的邊界" #: diskdrake/interactive.pm:749 #, c-format msgid "This partition is not resizeable" msgstr "這個分割區無法重新調整大小" #: diskdrake/interactive.pm:754 #, c-format msgid "All data on this partition should be backed-up" msgstr "所有在這個分割區上的資料都應該先經過備份" #: diskdrake/interactive.pm:756 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:761 #, c-format msgid "Choose the new size" msgstr "選取新的大小" #: diskdrake/interactive.pm:762 #, c-format msgid "New size in MB: " msgstr "新大小 (MB)：" #: diskdrake/interactive.pm:805 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:843 #, c-format msgid "Choose an existing RAID to add to" msgstr "選取一存在的磁碟陣列加入到" #: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862 #, c-format msgid "new" msgstr "新的" #: diskdrake/interactive.pm:860 #, c-format msgid "Choose an existing LVM to add to" msgstr "選取一個已經存在的 LVM 以加入" #: diskdrake/interactive.pm:866 #, c-format msgid "LVM name?" msgstr "LVM 名稱？" #: diskdrake/interactive.pm:903 #, c-format msgid "This partition can not be used for loopback" msgstr "這個分割區不能用來作為 loopback" #: diskdrake/interactive.pm:916 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:917 #, c-format msgid "Loopback file name: " msgstr "Loopback 檔案名稱：" #: diskdrake/interactive.pm:922 #, c-format msgid "Give a file name" msgstr "輸入一個檔案名稱" #: diskdrake/interactive.pm:925 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案" #: diskdrake/interactive.pm:926 #, c-format msgid "File already exists. Use it?" msgstr "檔案已經存在了。要使用它嗎？" #: diskdrake/interactive.pm:949 #, c-format msgid "Mount options" msgstr "掛載參數" #: diskdrake/interactive.pm:956 #, c-format msgid "Various" msgstr "各種的" #: diskdrake/interactive.pm:1020 #, c-format msgid "device" msgstr "裝置" #: diskdrake/interactive.pm:1021 #, c-format msgid "level" msgstr "階層" #: diskdrake/interactive.pm:1022 #, c-format msgid "chunk size in KiB" msgstr "組塊大小以 Kib 計量" #: diskdrake/interactive.pm:1039 #, c-format msgid "Be careful: this operation is dangerous." msgstr "請小心：這個動作很危險。" #: diskdrake/interactive.pm:1054 #, c-format msgid "What type of partitioning?" msgstr "以那種形式分割？" #: diskdrake/interactive.pm:1092 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "您需要重新開機以便於讓異動的設定生效" #: diskdrake/interactive.pm:1101 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！" #: diskdrake/interactive.pm:1114 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失" #: diskdrake/interactive.pm:1130 #, c-format msgid "Move files to the new partition" msgstr "將檔案搬移到新的分割區" #: diskdrake/interactive.pm:1130 #, c-format msgid "Hide files" msgstr "隱藏檔案" #: diskdrake/interactive.pm:1131 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "%s 目錄已經包含了資料了\n" "(%s)" #: diskdrake/interactive.pm:1142 #, c-format msgid "Moving files to the new partition" msgstr "正在將檔案搬移到新的分割區" #: diskdrake/interactive.pm:1146 #, c-format msgid "Copying %s" msgstr "正在複製 %s" #: diskdrake/interactive.pm:1150 #, c-format msgid "Removing %s" msgstr "正在移除 %s" #: diskdrake/interactive.pm:1164 #, c-format msgid "partition %s is now known as %s" msgstr "該分割區 %s 目前被認知為 %s" #: diskdrake/interactive.pm:1165 #, c-format msgid "Partitions have been renumbered: " msgstr "分割區已經重新編號：" #: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1244 #, c-format msgid "Device: " msgstr "裝置：" #: diskdrake/interactive.pm:1186 #, c-format msgid "Devfs name: " msgstr "Devfs 名稱：" #: diskdrake/interactive.pm:1187 #, c-format msgid "Volume label: " msgstr "磁區標籤：\"" #: diskdrake/interactive.pm:1188 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 磁碟代號：%s (猜測值)\n" #: diskdrake/interactive.pm:1192 diskdrake/interactive.pm:1201 #: diskdrake/interactive.pm:1262 #, c-format msgid "Type: " msgstr "格式：" #: diskdrake/interactive.pm:1196 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "名稱：" #: diskdrake/interactive.pm:1203 #, c-format msgid "Start: sector %s\n" msgstr "始於：第 %s 扇區\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Size: %s" msgstr "大小：%s" #: diskdrake/interactive.pm:1206 #, c-format msgid ", %s sectors" msgstr "，%s 扇區" #: diskdrake/interactive.pm:1208 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d 磁柱到第 %d 磁柱\n" #: diskdrake/interactive.pm:1209 #, c-format msgid "Number of logical extents: %d" msgstr "" #: diskdrake/interactive.pm:1210 #, c-format msgid "Formatted\n" msgstr "已格式化\n" #: diskdrake/interactive.pm:1211 #, c-format msgid "Not formatted\n" msgstr "未格式化\n" #: diskdrake/interactive.pm:1212 #, c-format msgid "Mounted\n" msgstr "已掛載\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "RAID %s\n" msgstr "磁碟陣列 %s\n" #: diskdrake/interactive.pm:1215 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "loopback 檔案：\n" " %s\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "預設開機的分割區\n" " (給 MS-DOS 開機程式用的，跟 lilo 無關)\n" #: diskdrake/interactive.pm:1218 #, c-format msgid "Level %s\n" msgstr "階層 %s\n" #: diskdrake/interactive.pm:1219 #, c-format msgid "Chunk size %d KiB\n" msgstr "組塊大小 %d KiB\n" #: diskdrake/interactive.pm:1220 #, c-format msgid "RAID-disks %s\n" msgstr "磁碟陣列-磁碟 %s\n" #: diskdrake/interactive.pm:1222 #, c-format msgid "Loopback file name: %s" msgstr "Loopback 檔案名稱： %s" #: diskdrake/interactive.pm:1225 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "可能是這樣的，這個分割區\n" "是透過驅動程式產生出來的\n" "您應該不要去異動這個分割區資料。\n" #: diskdrake/interactive.pm:1228 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "這個特殊分割區是用來作為\n" "雙重開機使用的。\n" #: diskdrake/interactive.pm:1245 #, c-format msgid "Read-only" msgstr "唯讀" #: diskdrake/interactive.pm:1246 #, c-format msgid "Size: %s\n" msgstr "大小：%s\n" #: diskdrake/interactive.pm:1247 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n" #: diskdrake/interactive.pm:1248 #, c-format msgid "Info: " msgstr "資訊：" #: diskdrake/interactive.pm:1249 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-磁碟 %s\n" #: diskdrake/interactive.pm:1250 #, c-format msgid "Partition table type: %s\n" msgstr "硬碟分割表形式：%s\n" #: diskdrake/interactive.pm:1251 #, c-format msgid "on channel %d id %d\n" msgstr "位在通道 %d id %d\n" #: diskdrake/interactive.pm:1286 #, c-format msgid "Filesystem encryption key" msgstr "檔案系統加密金鑰" #: diskdrake/interactive.pm:1287 #, c-format msgid "Choose your filesystem encryption key" msgstr "選擇您檔案系統所使用的加密金鑰" #: diskdrake/interactive.pm:1290 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)" #: diskdrake/interactive.pm:1291 #, c-format msgid "The encryption keys do not match" msgstr "輸入的加密金鑰不符合" #: diskdrake/interactive.pm:1294 network/netconnect.pm:1230 #: standalone/drakconnect:430 #, c-format msgid "Encryption key" msgstr "加密金鑰" #: diskdrake/interactive.pm:1295 #, c-format msgid "Encryption key (again)" msgstr "再次輸入加密金鑰" #: diskdrake/interactive.pm:1296 standalone/drakvpn:1031 #: standalone/drakvpn:1116 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "認證方式" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "改變分割區格式" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "無法使用 %s 使用者名稱登入系統 (密碼錯誤?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "需要 Domain 認證" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "那個使用者名稱" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "另外一個" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "請輸入你的使用者名稱，密碼以及網域名稱，以便於能夠連線存取這個主機。" #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3502 #, c-format msgid "Username" msgstr "使用者名稱" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "搜尋伺服器" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "搜尋新的伺服器" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "需要安裝 %s 這個套件，您要安裝它嗎？" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "必要的 %s 套件遺失" #: do_pkgs.pm:182 #, c-format msgid "Installing packages..." msgstr "正在安裝套件..." #: do_pkgs.pm:227 #, c-format msgid "Removing packages..." msgstr "正在移除套件..." #: fs.pm:487 fs.pm:536 #, c-format msgid "Mounting partition %s" msgstr "正在掛載分割區 %s" #: fs.pm:488 fs.pm:537 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗" #: fs.pm:508 fs.pm:515 #, c-format msgid "Checking %s" msgstr "檢查 %s" #: fs.pm:553 partition_table.pm:391 #, c-format msgid "error unmounting %s: %s" msgstr "卸下 %s 的掛載時發生錯誤：%s" #: fs.pm:585 #, c-format msgid "Enabling swap partition %s" msgstr "正在啟用 swap 分割區 %s" #: fs/format.pm:44 fs/format.pm:51 #, c-format msgid "Formatting partition %s" msgstr "正在格式化分割區 %s" #: fs/format.pm:48 #, c-format msgid "Creating and formatting file %s" msgstr "建立並格式化檔案 %s" #: fs/format.pm:83 #, c-format msgid "I do not know how to format %s in type %s" msgstr "不知道要如何將 %s 格式化為 %s 格式" #: fs/format.pm:88 fs/format.pm:90 #, c-format msgid "%s formatting of %s failed" msgstr "以 %s 格式化 %s 失敗" #: fs/mount_options.pm:112 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:115 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:118 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:120 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:124 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:128 #, c-format msgid "Mount the file system read-only." msgstr "以唯讀方式掛載檔案系統。" #: fs/mount_options.pm:130 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:134 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "允許一般使用者掛載檔案系統。\n" "掛載的使用者名稱會被寫入 mtab 因此他可以卸載檔案系統。\n" "這個選項套用了 noexec、nosuid 以及 nodev 的參數\n" "(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。" #: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "授予寫入權限給一般使用者" #: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "授予唯讀權限給一般使用者" #: fs/type.pm:372 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "小於 16MB 的分割區不能使用 JFS 格式" #: fs/type.pm:373 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "掛載為 /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "伺服器" #: fsedit.pm:183 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" #: fsedit.pm:400 #, c-format msgid "Mount points must begin with a leading /" msgstr "掛載點必需以 / 開頭" #: fsedit.pm:401 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "掛載點應該只有包含英文字母與數字與底線這類字元" #: fsedit.pm:402 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "已經有分割區分配到掛載點 %s 了\n" #: fsedit.pm:404 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "你已經選擇了一塊軟體磁碟陣列的分割區當作為根分割區 (/) 的掛載點。\n" "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n" "請確定會增加一個 /boot 分割區" #: fsedit.pm:407 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s" msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點" #: fsedit.pm:409 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "你已經選擇了一塊 LVM Logical Volume 當作為根分割區 (/) 的掛載點。\n" "沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n" "請確定會增加一個 /boot 分割區" #: fsedit.pm:412 #, c-format msgid "" "You may not be able to install lilo (since lilo does not handle a LV on " "multiple PVs)" msgstr "" #: fsedit.pm:415 fsedit.pm:417 #, c-format msgid "This directory should remain within the root filesystem" msgstr "這個目錄應該放在根檔案系統 (/) 才對" #: fsedit.pm:419 fsedit.pm:421 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n" #: fsedit.pm:423 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點" #: fsedit.pm:484 #, c-format msgid "Not enough free space for auto-allocating" msgstr "沒有足夠的空間來進行自動配置" #: fsedit.pm:486 #, c-format msgid "Nothing to do" msgstr "沒有做任何動作" #: harddrake/data.pm:61 install_any.pm:1640 #, c-format msgid "Floppy" msgstr "軟碟片" #: harddrake/data.pm:71 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:87 install_any.pm:1641 #, c-format msgid "Hard Disk" msgstr "硬碟" #: harddrake/data.pm:96 install_any.pm:1642 #, c-format msgid "CDROM" msgstr "光碟機" #: harddrake/data.pm:106 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD 燒錄器" #: harddrake/data.pm:116 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:126 standalone/drakbackup:2059 #, c-format msgid "Tape" msgstr "磁帶" #: harddrake/data.pm:135 #, c-format msgid "Videocard" msgstr "顯示卡" #: harddrake/data.pm:145 #, c-format msgid "Tvcard" msgstr "電視卡" #: harddrake/data.pm:154 #, c-format msgid "Other MultiMedia devices" msgstr "其他多媒體裝置" #: harddrake/data.pm:163 #, c-format msgid "Soundcard" msgstr "音效卡" #: harddrake/data.pm:176 #, c-format msgid "Webcam" msgstr "網路攝影機" #: harddrake/data.pm:190 #, c-format msgid "Processors" msgstr "處理器" #: harddrake/data.pm:200 #, c-format msgid "ISDN adapters" msgstr "ISDN 介面卡" #: harddrake/data.pm:210 #, c-format msgid "Ethernetcard" msgstr "乙太網路介面卡" #: harddrake/data.pm:228 network/netconnect.pm:567 #, c-format msgid "Modem" msgstr "數據機" #: harddrake/data.pm:238 #, c-format msgid "ADSL adapters" msgstr "ADSL 介面卡" #: harddrake/data.pm:252 #, c-format msgid "Memory" msgstr "記憶體" #: harddrake/data.pm:261 #, c-format msgid "AGP controllers" msgstr "AGP 控制器" #: harddrake/data.pm:270 help.pm:186 help.pm:855 #: install_steps_interactive.pm:979 #, c-format msgid "Printer" msgstr "印表機" #: harddrake/data.pm:280 #, c-format msgid "Joystick" msgstr "搖桿" #: harddrake/data.pm:290 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA 控制器" #: harddrake/data.pm:299 #, c-format msgid "SATA controllers" msgstr "SATA 控制器" #: harddrake/data.pm:312 #, c-format msgid "RAID controllers" msgstr "RAID 控制器" #: harddrake/data.pm:325 #, c-format msgid "Firewire controllers" msgstr "Firewire 控制器" #: harddrake/data.pm:334 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA 控制器" #: harddrake/data.pm:343 #, c-format msgid "SCSI controllers" msgstr "SCSI 控制器" #: harddrake/data.pm:352 #, c-format msgid "USB controllers" msgstr "USB 控制器" #: harddrake/data.pm:361 #, c-format msgid "USB ports" msgstr "USB 埠" #: harddrake/data.pm:370 #, c-format msgid "SMBus controllers" msgstr "SMBus 控制器" #: harddrake/data.pm:379 #, c-format msgid "Bridges and system controllers" msgstr "橋樑與系統控制器" #: harddrake/data.pm:388 help.pm:855 install_steps_interactive.pm:118 #: install_steps_interactive.pm:939 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "鍵盤" #: harddrake/data.pm:401 help.pm:855 install_steps_interactive.pm:972 #, c-format msgid "Mouse" msgstr "滑鼠" #: harddrake/data.pm:415 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:424 #, c-format msgid "Scanner" msgstr "掃描器" #: harddrake/data.pm:434 standalone/harddrake2:444 #, c-format msgid "Unknown/Others" msgstr "未知/其他" #: harddrake/data.pm:463 #, c-format msgid "cpu # " msgstr "CPU 編號" #: harddrake/sound.pm:191 standalone/drakconnect:170 #: standalone/drakconnect:648 #, c-format msgid "Please Wait... Applying the configuration" msgstr "請稍待... 正在套用該設定" #: harddrake/sound.pm:227 #, c-format msgid "No alternative driver" msgstr "無另外可供選擇的驅動程式" #: harddrake/sound.pm:228 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "目前沒有另外可供選擇的 OSS/ALSA 驅動程式支援你的音效卡 (%s)\n" "正在使用 \"%s\"" #: harddrake/sound.pm:234 #, c-format msgid "Sound configuration" msgstr "音效設定" #: harddrake/sound.pm:236 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您的音效卡 (%s)" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:241 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "您的卡現在正在使用 %s\"%s\" 驅動程式 (您的卡預設驅動程式為 \"%s\")" #: harddrake/sound.pm:243 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "驅動程式：" #: harddrake/sound.pm:262 #, c-format msgid "Trouble shooting" msgstr "疑難排解" #: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1059 #: network/ndiswrapper.pm:95 network/netconnect.pm:553 #: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230 #: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362 #: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464 #: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069 #: printer/printerdrake.pm:4193 printer/printerdrake.pm:5310 #: standalone/drakTermServ:325 standalone/drakTermServ:1104 #: standalone/drakTermServ:1165 standalone/drakTermServ:1810 #: standalone/drakbackup:510 standalone/drakbackup:609 standalone/drakboot:165 #: standalone/drakclock:224 standalone/drakconnect:1007 #: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:481 #: standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "警告" #: harddrake/sound.pm:270 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:278 #, c-format msgid "No open source driver" msgstr "無開放原始碼的驅動程式" #: harddrake/sound.pm:279 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"." #: harddrake/sound.pm:282 #, c-format msgid "No known driver" msgstr "無已知的驅動程式" #: harddrake/sound.pm:283 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)" #: harddrake/sound.pm:287 #, c-format msgid "Unknown driver" msgstr "未知的驅動程式" #: harddrake/sound.pm:288 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "錯誤：您的音效卡驅動程式 \"%s\" 沒有列出" #: harddrake/sound.pm:302 #, c-format msgid "Sound trouble shooting" msgstr "音效問題排除" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:305 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:331 #, c-format msgid "Let me pick any driver" msgstr "讓我選擇任何驅動程式" #: harddrake/sound.pm:334 #, c-format msgid "Choosing an arbitrary driver" msgstr "正在選擇任意的驅動程式" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:337 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "如果您真的認為您知道您音效卡應該使用那個驅動程式\n" "您可以在上面的列表中自己選取。\n" "\n" "目前您的音效卡 \"%s\" 使用的驅動程式是 \"%s\"。" #: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75 #: standalone/net_applet:77 #, c-format msgid "Auto-detect" msgstr "自動偵測" #: harddrake/v4l.pm:72 harddrake/v4l.pm:235 #, c-format msgid "Unknown|Generic" msgstr "未知|一般" #: harddrake/v4l.pm:105 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "未知|CPH05X (bt878) [許多廠商]" #: harddrake/v4l.pm:106 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "未知|CPH06X (bt878) [許多廠商]" #: harddrake/v4l.pm:309 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "對於目前大部分的電視卡，GNU/Linux 核心的 bttv 模組都能夠正確的偵測正確的參" "數。\n" "若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型" "號。若需要的話請直接選擇您的電視卡卡參數。" #: harddrake/v4l.pm:312 #, c-format msgid "Card model:" msgstr "卡模組：" #: harddrake/v4l.pm:313 #, c-format msgid "Tuner type:" msgstr "調頻類型：" #: harddrake/v4l.pm:314 #, c-format msgid "Number of capture buffers:" msgstr "擷取緩衝的數量：" #: harddrake/v4l.pm:314 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:316 #, c-format msgid "PLL setting:" msgstr "PLL 設定：" #: harddrake/v4l.pm:317 #, c-format msgid "Radio support:" msgstr "音效支援：" #: harddrake/v4l.pm:317 #, c-format msgid "enable radio support" msgstr "啟用音效支援" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "在繼續之前，您應該仔細的閱讀下面相關版權條款。\n" "這包含整個 Mandrakelinux 發行版的版權內容。若是您同意裡面的所有條款，\n" "請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。" #: help.pm:14 install_steps_gtk.pm:556 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "接受" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux 是一個多使用者的系統, 簡單說每個使用者都有其獨立的\n" "喜好設定, 他們的檔案等等. 您可以閱讀 ``Starter Guide 初學者導覽''\n" "以便於學習有關多使用者系統. 不同於系統管理者 \"root\"\n" "此時你新增的使用者將不被授權於改變除了他們的檔案\n" "與設定, 以保護系統免於非故意的或惡意的\n" "對系統造成衝擊的改變. 您需要建立至少\n" "一個一般使用者給你自己 -- 這是你應該用於\n" "一般日常操作的帳號. 雖然這是非常容易以 root\n" "登入來做任何事與全部的事, 這也是非常危險的! 一個\n" "非常簡單的錯誤可能造成系統將再也不能正常工作. 若\n" "你以一般使用者的身份犯了一連串的錯誤, 最糟的情況將是\n" "你遺失某些資訊, 但是不影響整個系統.\n" "\n" "第一行問你一真實名稱. 當然這並非必要\n" "-- 你事實上可以輸入任何你喜歡的. DrakX 將會用你打於此行\n" "的地一個字且複製它到 \"%s\" 行, 使用者將輸入\n" "以登入系統的名稱. 入你喜歡, 你可以推翻\n" "預設值且改變使用者名稱. 下一步是輸入一個密碼.\n" "以安全性觀點來看, 一個沒有特權(一般)使用者密碼是\n" "沒有 \"root\" 密碼來的重要, 但是這不構成理由以\n" "使它空白或過於簡單來忽略它: 畢竟您的檔案可能是\n" "於危險中.\n" "\n" "一旦您點選 \"%s\", 您可以新增其他使用者. 新增使用者給你的\n" "每一個朋友: 例如您的父親或姊妹. 當你已經完成\n" "新增使用者, 點選 \"%s\" .\n" "\n" "點選 \"%s\" 按鈕允許您改變預設 \"shell 貝殼命令列\" 給\n" "那位使用者 (預設為bash).\n" "\n" "當你已經完成新增使用者, 你將會被要求選擇一\n" "電腦開機時可以自動登入系統的使用者. 若\n" "你對那個特色有興趣 (且不太關心本地端\n" "安全性), 選擇希望的使用者與視窗管理員, 然後點選 \"%s\".\n" "若你對這個特色有沒有興趣, 不選取 \"%s\" 盒子." #: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783 #, c-format msgid "User name" msgstr "使用者名稱" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 #: install_steps_gtk.pm:698 interactive.pm:433 interactive/newt.pm:319 #: network/netconnect.pm:327 network/tools.pm:191 printer/printerdrake.pm:3678 #: standalone/drakTermServ:382 standalone/drakbackup:3953 #: standalone/drakbackup:4047 standalone/drakbackup:4064 #: standalone/drakbackup:4082 ugtk2.pm:506 #, c-format msgid "Next" msgstr "下一步" #: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:394 #, c-format msgid "Advanced" msgstr "進階" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "目前所列出來的是硬碟機上偵測到已經存在的 Linux 分割區.\n" "您可以保留巫師模式做的選擇, 因為他們對一般安裝是不錯的.\n" "如果您做任何改變的話, 您至少要定義出一塊當作根分割區 (\"/\").\n" "別選擇一個太小的分割區, 否則您將無法安裝足夠的軟體.\n" "如果您想儲存您的資料到一個分離的分割區, 你需要建立一個\"/home\" 分割區\n" "(只在您有多於一個 Linux 分割區情況下才可能).\n" "\n" "下列每個分割區都列出了: \"名稱\", \"容量\".\n" "\n" "\"名稱\" 都是有統一的命名方式: \"硬碟類型\", \"硬碟編號\", \n" "\"分割區編號\" (例如, \"hda1\").\n" "\n" "\"硬碟類型\" 部份, IDE 硬碟使用 \"hd\", SCSI 則是 \"sd\".\n" "\"硬碟編號\" 部份, 伴隨在 \"hd\" 或者是 \"sd\" 後面:\n" "\n" " * \"a\" 這是指 \"primary IDE controller 上第一台 (master) 硬碟\",\n" "\n" " * \"b\" 這是指 \"primmary IDE controller 上第二台 (slave) 硬碟\",\n" "\n" " * \"c\" 這是指 \"secondary IDE controller 上第一台 (master) 硬碟\",\n" "\n" " * \"d\" 這是指 \"secondary IDE controller 上第二台 (slave) 硬碟\".\n" "\n" "以 SCSI 硬碟來說, \"a\" 就是指 \"SCSI ID 編號最小的那一台\", \"b\"\n" "就是指 \"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去." #: help.pm:85 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "Mandrakelinux 安裝片包含數張光碟片. 若一所選擇的套件是位於另一張光碟,\n" "DrakeX 會彈出現在的光碟且要求您放入所要求的正確光碟片.\n" "若您沒有要求的光碟在手上的話, 就按下 \"%s\", 對應的套件不會被安裝." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "現在是指定那個程式您想要裝在您的系統上. Mandrakelinux 有上千個套件,\n" "為了簡單管理, 相似性質的應用程式已經被分類到群組裡.\n" "\n" "Mandrakelinux 分類套件群組於四個範疇. 你能由不同範疇混合與配對應用程式,\n" "所以一個 ``工作站''安裝也能安裝``伺服器''範疇安裝的應用程式.\n" "\n" " * \"%s\": 如果您計畫用您的機器當作一個工作站, 選擇一個或\n" "更多的群組於工作站範疇.\n" "\n" " * \"%s\": 如果您計畫用您的機器來程式設計, 選擇適當\n" "的群組於那個範疇. 特別的 \"LSB\" 群組將設定您的系統使之盡量符合\n" "Linux Standard Bases 規範.\n" "\n" " 選擇 \"LSB\" 群組除了預設的 \"2.6\" 也將安裝 \"2.4\" 核心系列,\n" "這是確保系統的 100%%-LSB compliance. 可是, 如果您不選擇 \"LSB\"\n" "群組您仍然將有一個幾乎 100%% LSB-compliant 的系統.\n" "\n" " * \"%s\": 如果您的機器是要用作伺服器, 選擇那一個\n" "更常用的服務您想裝在系統上.\n" "\n" " * \"%s\": 這是您選擇您的偏好的圖形環境的地方.\n" "如果您像要有圖形介面可用, 至少一個要被選擇.\n" "\n" "移動滑鼠游標到一個群組上方將顯示一段關於該群組簡短的解釋文字\n" "text about that group.\n" "\n" "你能選取 \"%s\" 方塊盒, 若您對所提供的套件熟悉或您想要有對於什麼\n" "將被安裝有全部控制, 這將會有用\n" "\n" "若您用 \"%s\" 模式開始安裝, 你可以取消選擇全部群組且防止安裝任何新套件.\n" "這對修復或更新一個已經存在的系統很有用.\n" "\n" "如果當您執行一個一般正常安裝, 您取消選擇全部群組 (相反於一個升級)，\n" "一個對話方塊將會跳出建議不同的選項給最小安裝：\n" "\n" " * \"%s\"：安裝最少的套件來擁有可工作的圖形桌面。\n" "\n" " * \"%s\"：安裝系統基礎加上基本的工具與其文件\n" "這種安裝適合於設定起來一個伺服器。\n" "\n" " * \"%s\"：將安裝絕對最少套件必要於使一個 Linux 系統工作。\n" "用這個安裝您將只擁有一個命令列介面. 全部安裝大小大約 65 MB。" #: help.pm:146 share/compssUsers.pl:23 #, c-format msgid "Workstation" msgstr "工作站" #: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 #: share/compssUsers.pl:164 #, c-format msgid "Development" msgstr "程式開發" #: help.pm:146 share/compssUsers.pl:144 #, c-format msgid "Graphical Environment" msgstr "圖形環境" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "選取單一套件" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "升級" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "包含 X 環境" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "包含基本的說明文件" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "真的最小安裝" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "自動相依性" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:611 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #: standalone/drakbackup:2349 standalone/drakbackup:2353 #, c-format msgid "Configure" msgstr "設定" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "這個對話視窗用來選擇你打算於啟動系統時執行運作的服務.\n" "\n" "DrakX 將列出在現在安裝上可選擇的服務項目. 仔細詳細回顧查看每一個\n" "且取消選取那些開機時不會用到的.\n" "\n" "當你選取該項目時, 會出現一個簡略說明文字. 但是若是您對於該項目\n" "實在不確定是否要啟用的話, 比較安全的作法就是維持原樣不要動作即可.\n" "\n" "!! 在這階段, 請小心如果您這台機器是要當作伺服器: 您大概不想要\n" "開啟那些您不用的服務. 請記得某些服務在伺服器上啟動後可能會有危險.\n" "大致上只選那些你真正需要的服務. !!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:874 #, c-format msgid "Hardware clock set to GMT" msgstr "硬體時鐘設定為 GMT 時間" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "自動時間同步" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "顯示卡\n" "\n" " 一般而言，安裝程式會自動偵測並設定安裝在您機器上的顯示\n" "卡。如果偵測結果不正確，您可以由本清單中選取正確的型號。\n" "\n" " 如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D\n" "加速功能)，請您選擇一個最符合您需求的伺服器來使用。" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "螢幕\n" "\n" " 一般來說，安裝程式會自動偵測並設定連接到您電腦的螢幕。如果它不正確\n" "，您可以由此列表中選取連結到您電腦的螢幕。" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "解析度\n" "\n" " 在這裡您可以選擇您顯示卡可以使用的解析度與色深。請選取最適合您的設定值\n" "(您可以在安裝完成之後更改)。您選取的設定值的樣本將顯示在螢幕圖片上。" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D加速\n" "功能)，請您選擇一個最符合您需求的伺服器來使用。" #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "選項\n" "\n" " 這個步驟允許您選擇是否想要您的機器開機時自動跳到圖形介.\n" "顯然地, 如果您的機器是當作一個伺服器或您不能成功地設定顯示,\n" "您想核對選取 \"%s\"." #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "您需要決定那裡你想要安裝 Mandrakelinux\n" "作業系統於那個硬碟. 如果您的硬碟是全新尚未使用或\n" "已經存在的作業系統正在使用全部可被利用的空間, 您將\n" "必須進行分割硬碟的動作. 基本上, 分割硬碟的動作包含\n" "邏輯上劃分它以建立需要的空間來安裝您的新\n" "Mandrakelinux 系統.\n" "\n" "因為分割硬碟的動作程序通常是無法回復的\n" "且能導致資料遺失, 若您是一位不熟練的使用者,\n" "割硬碟的動作是脅迫恫嚇與充滿著緊張壓力的. 幸運的是\n" "DrakX 包含巫師模式以簡化這程序. 於繼續此步驟前,\n" "先詳細閱讀其他部份與全部, 慢慢來.\n" "\n" "根據您的硬碟設定值, 有數個選項可用:\n" "\n" " * \"%s\". 該項目將會執行自動劃分您空白的磁碟.\n" "若您使用此選項, 將沒有進一步的提示.\n" "\n" " * \"%s\". 巫師模式已經偵測一個或更多已經存在的 Linux 硬碟\n" "分割. 若您想要使用他們, 選此選項. 您將會\n" "被要求選擇關於每一個分割的掛載點.\n" "就有的掛載點預設為被選擇, 且大部分最好保留\n" "他們.\n" "\n" " * \"%s\". 若您硬碟有安裝 Microsoft Windows 且佔據\n" "全部可用剩餘可用的空間, 您將必須建立自由空間給\n" "GNU/Linux. 為了達到目的, 您可以刪除 Microsoft Windows 分割與資料\n" "(見 ``Erase entire disk (消除整個磁碟)'' 解決方案) 或是\n" "重新調整 Microsoft Windows FAT 或 NTFS 分割區大小.\n" "若您已經 defragment(不連續碎片重新整理) Windows 分割\n" "且它用 FAT 格式.重新調整分割可以被執行於不遺失任何資料\n" "資料備份是被強烈建議的. 若您想要使用 Mandrakelinux and Microsoft\n" "Windows 於同一台電腦, 使用此選項是被建議的.\n" "\n" " 選擇此選項前, 請了解當使用這個過程項目後, Microsoft Windows\n" "分割可用的剩餘空間將會比之前減少. 您將有較少的自由空間於\n" " Microsoft Windows 來存您的資料與安裝新軟體.\n" "\n" " * \"%s\". 如果您想要刪除全部現存於您的硬碟上資料與\n" "分割且以您的新 Mandrakelinux 系統替換他們,\n" "選此選項. 但是小心使用, 你將無法於你確認之後\n" "逆反你的決定.\n" "\n" " !! 若你選此選項, 全部於你的磁碟上的資料將會被刪除. !!\n" "\n" " * \"%s\". 當硬碟完全被 Microsoft Windows 佔據時出現此選項.\n" "選擇此選項將會簡單地消除一切於磁碟中的資料且從新開始,\n" "從頭開始分割一切.\n" "\n" " !! 若你選此選項, 全部於你的磁碟上的資料將會遺失. !!\n" "\n" " * \"%s\". 選這個選項若您想要手動分割您的硬碟.\n" "請小心使用 -- 它是強力的但是危險的選擇且您可能非常\n" "容易遺失您的全部資料. 這是為何此選項事實上只於\n" "您曾經做過類似於此且有些許經驗的時候被建議.\n" "更多指令於如何使用 DiskDrake 工具, 指向\n" "``Starter Guide (初學者指導)''的\n" "``Managing Your Partitions (管理您的分割)'' 部份." #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "使用未用到的空間" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "使用已經存在的分割區" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "使用 Windows 分割區所剩餘的可用空間" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "刪除所有磁碟內容" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "移除 Windows" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "自訂磁碟分割" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "整個安裝步驟到這裡代表您安裝已經完成了且 GNU/Linux 系統準備好被使用.\n" "只要點選 \"%s\" 來重新啟動系統. 別忘了移除安裝媒介 (光碟或軟片).\n" "於您的電腦完成硬體測試後您第一個見到的是開機載入程式選單,\n" "給您開始那個作業系統的選擇\n" " \"%s\" 按鈕顯示另兩個按鈕到:\n" "\n" "* \"%s\": 使您建立一個安裝軟片, 一張不需要操作手的幫助\n" "就能夠自動執行全部安裝的軟片, 類似於您剛剛設定的安裝一樣.\n" "\n" " 注意按下那個按鈕後有兩個不同的選項可供選擇:\n" "\n" " * \"%s\". 這是半自動安裝方式, 磁碟分割項目將是唯一維持手動方式操作.\n" "\n" " * \"%s\". 這是全自動的安裝方式: 硬碟將完全被重新寫入, 全部資料遺失.\n" "\n" " 這功能對於需要大量安裝很多相似機器上的話來說這是相當實用.\n" "可以參考我們網頁上自動安裝章節的更多資訊.\n" "\n" " * \"%s\"(*): 儲存一個於這安裝時選擇的套件清單.\n" "要用這些選擇於另一個安裝, 插入軟片且開始安裝. 於提示時按下 F1 按鍵,\n" "然後輸入 >>linux defcfg=\"floppy\"<< 按下 [Enter] 鍵.\n" "\n" "(*) 您需要一個 FAT-formatted 軟片. 要建立一張於於GNU/Linux 環境下,\n" "鍵入 \"mformat a:\", 或 \"fdformat /dev/fd0\" 然後 \"mkfs.vfat /dev/fd0\"." #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "產生自動安裝軟片" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Replay" msgstr "重播" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Automated" msgstr "自動化" #: help.pm:409 install_steps_interactive.pm:1334 #, c-format msgid "Save packages selection" msgstr "儲存套件選擇" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "如果您選擇去重新使用某些 GNU/Linux 分割, 您或許想要重新格式化他們\n" "且抹去任何他們包含的資料. 要的話, 請選擇那些分割.\n" "請注意一下, 並不是所有先前已經存在的分割區都得重新格式化,\n" "您必須重新格式化包含作業系統的分割 (例如 \"/\", \"/usr\" or \"/var\")\n" "但是您不需要重新格式化包含您想保留資料的分割 (通常是 \"/home\").\n" "\n" "請小心選擇分割. 當格式化完成時, 全部在選擇分割上得資料將被刪除且\n" "您將不行重新恢復它.\n" "當您準備好要格式化此分割, 點選 \"%s\".\n" "\n" "若您想選擇另一個分割給您的新的 Mandrakelinux 作業系統安裝, 點選了\"%s\".\n" "若您想選擇要被檢查磁碟上壞的區塊的分割, 點選.\"%s\"." #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:434 #: interactive/newt.pm:318 printer/printerdrake.pm:3676 #: standalone/drakTermServ:361 standalone/drakbackup:3913 #: standalone/drakbackup:3952 standalone/drakbackup:4063 #: standalone/drakbackup:4078 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "上一步" #: help.pm:434 #, c-format msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "此時您安裝 Mandrakelinux 時, 或許自從初始釋出的某些套件將有更新.\n" "臭蟲或許已經修正了, 安全性問題解決了. 為了允許您從這些更新中\n" "獲得利益, 您現在可以由網際網路下載他們. 如果您有可用的網際網路連線,\n" "選取 \"%s\", 或是, 如果您想稍後安裝更新套件, 選取 \"%s\".\n" "\n" "選擇 \"%s\" 將顯示一張更新可以被擷取的網站位置清單. 您應該選擇一個\n" "跟您近的. 一個套件選擇樹將出現: 審查選擇, 按下 \"%s\" 來擷取且安裝\n" "被選擇的套件, 或 \"%s\" 以中斷放棄." #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 #: install_steps_interactive.pm:156 standalone/drakbackup:4110 #, c-format msgid "Install" msgstr "安裝" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "到這裡時, DrakX 將允許您選擇您想要的安全性等級給您的機器.\n" "根據拇指規則, 若是機器將要有包含重要的資料, 或是直接暴露在網際網路,\n" "安全性等級應該設定較高. 權衡之下, 較高的安全性等級換得不容易使用.\n" "\n" "如果您不知道選什麼, 保留預設選項. 您將能在稍後用 draksec 工具改變它,\n" "draksec 是 Mandrakelinux 控制中心的一部分.用負責安全性的人的 e-mail 地址填入 " "\"%s\" 欄位. 安全性訊息將被寄到\n" "那個位址." #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "安全性管理員:" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "在這個階段, 您需要選擇要用來安裝 Mandrakelinux 系統的分割區.\n" "如果分割區已經被定義了, 不管是從舊有的 GNU/Linux 安裝或是\n" "另一個處理分割區的工具, 您可以使用原本已經劃分好的分割區.\n" "否則硬碟分割必須要被定義.\n" "\n" "要建立分割區, 您需要先選擇一台硬碟. 您可以選擇要操作的分割區, 按 ``hda''\n" "為第一台 IDE 磁碟, ``hdb'' 為第二台, ``sda'' 為第一台 SCSI 磁碟等等.\n" "\n" "要進行分割的動作於選好的硬碟上, 您有這些項目可以使用:\n" "\n" " * \"%s\": 這個選項刪除在所選的影碟上的全部分割區\n" "\n" " * \"%s\": 這個選項使您自動建立 ext3 與 swap 分割區於您的硬碟上的空白空間\n" "\n" "\"%s\": 給多加的功能的使用:\n" "\n" " * \"%s\": 儲存分割表到軟片. 必要時對於分割表拯救有用. 強烈建議執行此步驟.\n" "\n" " * \"%s\": 允許您回存一個之前從軟片儲存的分割表\n" "\n" " * \"%s\": 如果您的分割表受損, 您可以試著用這個選項救回它.\n" "請小心且記得這並非總是有效.\n" "\n" " * \"%s\": 丟棄全部改變且重新載入原始硬碟的分割表.\n" "\n" " * \"%s\": 不選取這個選項將強制使用者手動掛載與卸載可移除式媒介例如磁碟片與\n" "光碟。\n" "\n" " * \"%s\": 如果您想用巫師來分割您的硬碟, 使用這個選項. 如果您沒有對於\n" "操作分割的好的了解, 這是被建議的.\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": 用這個選項來取消您的變更.\n" "\n" " * \"%s\": 允許多加的動作於分割 (類型, 選項, 格式)且給更多的關於硬碟的資訊.\n" "\n" " * \"%s\": 當您完成分割您的硬碟, 這將儲存您的變更回磁碟.\n" "\n" "當定義一個分割的大小時, 您可以好好的用鍵盤上的方向鍵來設定分割大小.\n" "\n" "注意: 您可以用鍵盤達成任何選項. 用 [Tab] 鍵與上或下方向鍵瀏覽分割.\n" "\n" "當一個分個被選擇時, 您可以使用:\n" "\n" " * Ctrl-c 來建立一個新的分割 (當空白分割被選擇時)\n" "\n" " * Ctrl-d 來刪除一個分割\n" "\n" " * Ctrl-m 來設定掛載點\n" "\n" "要得到關於不同可用的檔案系統的資訊, 請從 ``Reference Manual (參考手冊)''\n" "閱讀 ext2FS 章節.\n" "\n" "如果您正在安裝於一個 PPC 機器, 您將想要建立一個小的 HFS\n" "``bootstrap'' 分割至少 1MB 以用於 yaboot 開機載入器. 如果您選擇使分割大一" "些,\n" "像 50MB, 您或許發現它是一個好用的貯存一個備用核心與 ramdisk\n" "影像給緊急使用開機的好地方." #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "可移除式媒介自動掛載" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "切換一般/專家模式" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "多於一個 Microsoft 分割區已經在您的硬碟上被偵測到. 請選擇您希望要重新調整 大" "小的分割以便安裝您的新的 Mandrakelinux 作業系統.\n" "\n" "每個分割區都列出了像是: \"Linux 名稱\", \"Windows 名稱\", \"容量\".\n" "\n" "\"Linux 名稱\" 是有結構性的: \"硬碟型態\", \"硬碟編號\", \"分割區編號\"\n" "(比方像是: \"hda1\" ).\n" "\n" "\"硬碟型態\" 就是, 若您使用的是 IDE 硬碟, 會顯示 \"hd\", 若是SCSI硬碟的話,\n" "就是 \"sd\".\n" "\n" "\"硬碟編號\" 就是在 \"hd\" 或者是 \"sd\" 後面的字母. 以 IDE 硬碟裝置來說:\n" "\n" " * \"a\"這是指 \"primary IDE controller 上第一台 (master) 硬碟\";\n" "\n" " * \"b\"這是指\"primmary IDE controller 上第二台 (slave) 硬碟\";\n" "\n" " * \"c\"這是指\"secondary IDE controller 上第一台 (master) 硬碟\";\n" "\n" " * \"d\"這是指\"secondary IDE controller 上第二台 (slave) 硬碟\".\n" "\n" "以 SCSI 硬碟來說, \"a\" 是指 \"SCSI ID 編號最小的那一台硬碟\", \"b\" 是指" "\"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去.....\n" "\n" "\"Windows 名稱\" 是在 Windows 下的磁碟機代號名稱 (第一個磁碟或分割稱為\n" "\"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "根據您所選的語言 (), DrakX 將會自動選擇一個特別的鍵盤設定型態. 檢查所選擇的\n" "符合您或選擇另一個鍵盤布局\n" "\n" "您或許沒有精確對應於您的語言的鍵盤: 例如, 如果您是一個說英文的瑞士本國人,\n" "您或許有瑞士鍵盤. 或如果您說英文且在魁北克 (Quebec), 您或許發現您自己在一個\n" "您本國語言與國家鍵盤組合不對稱的情況. 不管是那種情形, 這個安裝步驟將允許您\n" "從一個清單中選擇適合的鍵盤\n" "\n" "點選 \"%s\" 按鈕以顯示一個支援的鍵盤清單.\n" "\n" "如果您根據一個非拉丁語系字母選擇一個鍵盤布局, 下一步對話視窗將允許您選擇\n" "鍵捆綁以便切換於拉丁與非拉丁鍵盤布局之中." #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "第一步驟是選擇您偏好的語言.\n" "\n" "您的偏好語言選擇將一般來說影響安裝, 文件, 與系統. 先選擇您在的區域, 然後\n" "您說的語言.\n" "\n" "點選 \"%s\" 按鍵將允許您選擇其他語言來安裝在您的工作站上, 因此, 安裝特殊語" "言\n" "檔案給系統文件與應用程式. 例如, 如果西班牙使用者會用您的機器, 在樹狀檢視中\n" "選擇英文當預設語言且在進階部份選擇 \"%s\".\n" "\n" "關於 UTF-8 (unicode) 支援: Unicode 是一個新的字元編碼以含蓋全部存在的語言.\n" "然而, 在 GNU/Linux 下完全的支援仍然在開發中. 因為那個原因, Mandrakelinux 的\n" " UTF-8 使用將根據使用者的選擇:\n" "\n" " * 如果您選擇一個有強烈舊式編碼的語言 (latin1 語言, 俄羅斯, 日本, 中國,\n" "韓國, 泰國, 希臘, 土耳其, 大多的 iso-8859-2 語言)\n" "\n" " * 其他語言將使用 unicode 為預設;\n" "\n" " * 如果兩個或兩個以上的語言被需要, 且那些語言不用相同的編碼, 則 unicode 將被" "用於\n" "整個系統;\n" "\n" " * 最後, unicode 也可以被強制使用遍布系統, 藉由使用者的選擇 \"%s\" 選項\n" "來要求之.\n" "\n" "記得您不被限制於選擇一個單一的附加語言. 您可以選擇數個, 或甚至藉由選擇\n" " \"%s\" 方塊安裝他們全部. 選擇支援對語言來說是指翻譯, 字型, 拼字檢查等等,\n" "將也會被安裝給那個語言.\n" "為了切換於不同的安裝於您系統上的語言之間, 您可以用 \"root\" 發射\n" "\"localedrake\" 命令來改變用於整個系統上的語言. 用一般使用者執行命令\n" "將只會改變對於那個特別使用者的語言設定." #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "通常 DrakX 沒有偵測滑鼠按鍵數量的問題. 如果有的話, 它假設您有兩鍵的滑鼠\n" "且將設定它模擬三鍵. 第三鍵按鍵於兩鍵滑鼠可以由同時按下左鍵與右鍵來模擬.\n" "DrakX 將會自動知道您的滑鼠是否使用 PS/2, 序列埠 或 USB 介面.\n" "\n" " 如果您有一個無滾輪的三鍵滑鼠, 您可以選擇 \"%s\" 滑鼠. DrakX 將會設定您的\n" "滑鼠以至於您可以用它模擬滾輪: 為了要使用它, 按下中間鍵且上下移動您的滑鼠指" "標.\n" "\n" "如果由於某些原因您想指定一個不同的滑鼠類型, 從提供的清單中選它.\n" "\n" "您可以選擇 \"%s\" 項目來選擇一個 ``generic (一般)'' 滑鼠型態, 適用於幾乎全" "部\n" "的滑鼠.\n" "\n" "如果您選擇一個不同於預設值的滑鼠, 一個測試螢幕將會顯示. 使用案件與滾輪來\n" "校驗設定值是正確的且滑鼠正確工作. 如果滑鼠不能工作, 按下空白鍵或 [Return] " "鍵\n" "以取消測試且您將回到滑鼠清單.\n" "\n" "某些情況下, 滾輪滑鼠不能被自動偵測, 所以您將需要從清單中選擇您的滑鼠.\n" "確定選擇一個對應於您的滑鼠連接的埠的一項. 選擇一個滑鼠且按下 \"%s\" 鍵後,\n" "一個滑鼠影像將顯示在螢幕上.\n" " 請捲動滑鼠滾輪以確定它正確被驅動. 當您滾動\n" "滑鼠滾輪, 您將看見螢幕上滾動滾輪移動.\n" " 測試按鍵且檢查滑鼠指標當您移動\n" "您的滑鼠時在螢幕上移動." #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "滾輪模擬" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "通用 | 任何 PS/2 & USB 滑鼠" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "請選擇正確的連接埠名稱. 比方, Windows 所稱呼的 \"COM1\"\n" "在 GNU/Linux 環境是稱呼為 \"ttyS0\"." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "這是最重要的 GNU/Linux 系統安全性決定點: 你一定要輸入 \"root\" 密碼.\n" "\"root\" 是系統管理員且是被授權做更新, 增加使用者, 變更整個系統設定等等\n" "的人. 簡而言之, \"root\"能做任何事! 那就是為什麼您必須要選擇一個困難猜測\n" "的密碼. DrakX 將告訴您您的密碼是否太簡單. 就像您所見的一樣, 您並不被強制輸" "入\n" "一個密碼, 但是我們強烈建議如此. GNU/Linux 就像其他任何作業系統一般易於受\n" "操作手錯誤影響. 因為 \"root\" 可以克服全部限制且藉由不小心存取分割, 可以\n" "不經意地抹除全部分割上的資料, 困難變成 \"root\" 是重要的.\n" "\n" "密碼應該是一組字母與數字字元且至少 8 個字元長. 絕不寫下 \"root\" 密碼 - \n" "它使得太容易妥協您的系統(安全性).\n" "\n" "一個警告: 別把密碼設定太長或太複雜, 因為您必須能記住它!\n" "\n" "您在輸入密碼時, 螢幕上不會顯示出你實際敲入的內容. 另外就是您需要輸入兩次\n" "以便於確定所輸入的密碼沒有打錯. 如果您不小心做出兩次同樣的輸入錯誤,\n" "您將必須使用這個 ``錯誤'' 密碼於第一次您試著以 \"root\" 連入.\n" "\n" "如果您想要一個認證伺服器來控制存取您的電腦, 點選 \"%s\" 按鍵.\n" "\n" "若是你知道您所在網路有使用 LDAP, NIS, 或 PDC Windows 網域認證服務,\n" "選適合的一個給 \"%s\". 如果您不知道選那一個, 向網路管理者詢問相關資訊.\n" "\n" "如果您遇到記住密碼的問題, 或如果您的電腦將永遠不連上網際網路且您絕對相信\n" "任何使用您的電腦的人, 您可以選擇有 \"%s\"." #: help.pm:722 #, c-format msgid "authentication" msgstr "認證" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "現在要選擇您的電腦要使用的列印系統. 其他作業系統或許只有提供您一種選擇,\n" "但是 Mandrakelinux 這邊提供了兩種選擇. 每一種列印系統是最適合於特別設定型" "態.\n" "\n" " * \"%s\" - 是 ``print, do not queue (列印, 不排隊)'' 之縮寫字, 是當您有一" "個\n" "直接連線的印表機, 您不想因為卡紙而驚慌, 且您沒有網路印表機. (\"%s\"\n" "只將會處理非常簡單的網路條件且當用於網路時有些慢) 如果這是您第一次 GNU/" "Linux\n" "經驗, 建議您使用\"pdq\".\n" "\n" " * \"%s\" 是 ``Common Unix Printing System (通用 Unix 列印系統)'', 這是一套\n" "對於直接列印到本地端印表機上, 或者是到地球另一端都相當出色的選擇. 它的設定\n" "是相當簡單且可以當成古老的 lpd 列印系統的伺服器端或者是用戶端使用, 所以它是\n" "相容於需要列印服務比較舊的作業系統. 相當強力, 基本設定幾乎跟 \"pdq\" 一樣\n" "簡單. 如果您希望能夠模擬 \"lpd\" 伺服器, 確定您開啟 \"cups-lpd\" daemon.\n" "\"%s\" 提供了圖形的介面前端給列印, 選擇列印的選項, 管理印表機.\n" "\n" "如果您現在做出決定, 且您之後發現不喜歡您的列印系統, 您可以藉由從\n" "Mandrakelinux 控制中心執行 PrinterDrake 點選 \"%s\" 按鍵改變它." #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:115 printer/data.pm:118 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "專家" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX 將要偵測您電腦上的 IDE 裝置. 它也會順便掃描您系統上的 PCI\n" "SCSI 介面卡. 當偵測到 SCSI 卡時, DrakX 將會自動安裝適當的驅動程式\n" "\n" "因為也許無法完全的偵測出您的系統是否還有更多的硬體裝置, 所以 DrakX或許會失敗" "偵測您的硬碟. 若是這樣, 您必須手動指定您的硬體.\n" "\n" "如果您必須手動方式指定您的 PCI SCSI 適配器時, DrakX 會詢問您是否要對這個\n" "驅動程式設定選項參數. 您應該要允許 DrakX 能夠先自動偵測硬體卡特別的選項參數\n" "以需要初始化適配器. 通常, DrakX 將會沒有問題通過這個步驟.\n" "\n" "若是 DrakX 無法偵測選項以自動決定那個參數需要被送到硬體, 您必須手動設定\n" "驅動程式." #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" #: help.pm:788 help.pm:855 install_steps_interactive.pm:1006 #: install_steps_interactive.pm:1023 #, c-format msgid "Sound card" msgstr "音效卡" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "時區" #: help.pm:855 install_steps_interactive.pm:1039 #, c-format msgid "TV card" msgstr "電視卡" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN 卡" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "圖形介面" #: help.pm:855 install_any.pm:1663 install_steps_interactive.pm:1057 #: standalone/drakbackup:2044 #, c-format msgid "Network" msgstr "網路" #: help.pm:855 install_steps_interactive.pm:1072 #, c-format msgid "Proxies" msgstr "代理伺服器" #: help.pm:855 install_steps_interactive.pm:1083 #, c-format msgid "Security Level" msgstr "安全層級" #: help.pm:855 install_steps_interactive.pm:1097 #, c-format msgid "Firewall" msgstr "防火牆" #: help.pm:855 install_steps_interactive.pm:1113 #, c-format msgid "Bootloader" msgstr "開機載入器" #: help.pm:855 install_steps_interactive.pm:1126 services.pm:193 #, c-format msgid "Services" msgstr "服務" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "選擇您想要抹除的硬碟來安裝新的 Mandrakelinux 分割. 小心,\n" "磁碟上全部資料將遺失且將無法挽回!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "您如果想要刪除在這個硬碟上的全部資料與分割, 點選 \"%s\".\n" "小心, 點選 \"%s\" 之後, 您將無法挽回任何在這個硬碟上的資料與分割, 包含\n" "Windows 資料.\n" "\n" "點選 \"%s\" 以不遺失在這個硬碟上的資料與分割放棄這個動作." #: help.pm:869 #, c-format msgid "Next ->" msgstr "下一步 ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- 上一步" #: install2.pm:117 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "無法存取對應您的核心的核心模組 (檔案 %s 遺失)，這一般表示您的開機軟片不同步" "於\n" "安裝媒介 (請建立一個更新的開機磁片)" #: install2.pm:172 #, c-format msgid "You must also format %s" msgstr "您也必須要格式化 %s" #: install_any.pm:406 #, c-format msgid "Do you have further supplementary media?" msgstr "您還有其他的補充媒介嗎?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:409 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "下列媒介已經被發現且將被用於安裝： %s。\n" "\n" "\n" "您有補充安裝媒介要設定嗎?" #: install_any.pm:422 printer/printerdrake.pm:3022 #: printer/printerdrake.pm:3029 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:422 #, c-format msgid "Network (http)" msgstr "網路 (http)" #: install_any.pm:422 #, c-format msgid "Network (ftp)" msgstr "網路 (ftp)" #: install_any.pm:451 #, c-format msgid "Insert the CD 1 again" msgstr "請再次插入光碟 1" #: install_any.pm:479 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "沒有找到任何裝置" #: install_any.pm:484 #, c-format msgid "Insert the CD" msgstr "請插入光碟" #: install_any.pm:489 #, c-format msgid "Unable to mount CD-ROM" msgstr "無法掛載光碟機" #: install_any.pm:521 install_any.pm:525 #, c-format msgid "URL of the mirror?" msgstr "映像站的 URL？" #: install_any.pm:558 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "無法在這個映像站上找到套件列表檔。請確定位址是正確的。" #: install_any.pm:725 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "更換光碟片！\n" "請插入標籤為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。" #: install_any.pm:738 #, c-format msgid "Copying in progress" msgstr "複製進行中" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:878 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "您已經選擇了下面的伺服器：%s\n" "\n" "\n" "這些伺服器安裝好後預設是啟用的。他們沒有任何已知的安全性問題，\n" "但是某些新的安全性問題或許會被發現。在這種情況下，請您一定要儘快更新。\n" "\n" "\n" "您確定真的要安裝這些伺服器嗎？\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:901 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "下列套件將被移除以升級您的系統：%s\n" "\n" "\n" "您確定要移除這些套件嗎？\n" #: install_any.pm:1349 partition_table.pm:603 #, c-format msgid "Error reading file %s" msgstr "讀取檔案 %s 時發生錯誤" #: install_any.pm:1560 #, c-format msgid "The following disk(s) were renamed:" msgstr "下列磁碟已經改名：" #: install_any.pm:1562 #, c-format msgid "%s (previously named as %s)" msgstr "%s (原本為 %s)" #: install_any.pm:1600 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體" "以找出問題的原因所在" #: install_any.pm:1644 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1644 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1644 #, c-format msgid "NFS" msgstr "NFS" #: install_any.pm:1667 #, c-format msgid "Please choose a media" msgstr "請選擇一個媒介" #: install_any.pm:1699 #, c-format msgid "Bad media %s" msgstr "損壞的媒介 %s" #: install_any.pm:1711 #, c-format msgid "File already exists. Overwrite it?" msgstr "檔案已經存在了。要覆蓋它嗎？" #: install_any.pm:1762 #, c-format msgid "Can not make screenshots before partitioning" msgstr "在尚未進行分割前無法提供畫面捕捉功能" #: install_any.pm:1769 #, c-format msgid "Screenshots will be available after install in %s" msgstr "在安裝於 %s 後就能夠提供畫面捕捉功能" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "系統安裝" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "系統設定" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "某些在您電腦上的硬體需要 ``版權專有'' 的驅動程式以便於能夠工作。\n" "您可以在這裡找到一些相關的資訊： %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "您必須指定一個分割區來放根目錄。\n" "請建立一個分割區 (或點選一個已經存在的)，\n" "接著選動作 ``掛載點'' 且把它設成 `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "您沒有設定置換分割區 (swap)。\n" "\n" "不管如何都要繼續？" #: install_interactive.pm:70 install_steps.pm:211 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "沒有足夠的空間可以建立新的分割區了" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "使用已經存在的分割區" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "沒有已經存在的分割區可供使用" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "使用 Windows 分割區作為 loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "您希望要用那個分割區給 Linux4Win 來使用呢？" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "選取大小" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "根分割區的大小 (MB)：" #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "置換分割區 (swap) 的大小 (MB)：" #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "沒有可用的 FAT 分割區能當成 loopback 使用 (或者是沒有足夠的剩餘空間)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "您要重新調整那個分割區的大小？" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "FAT 重新調整大小無法處理您的分割區，\n" "發生了以下的錯誤： %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "計算 Windows 分割區大小" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" "您的 Windows 分割區太支離破碎。請先用 Windows 重新開機，執行 ``defrag'' 工具" "程式，然後重新開始安裝 Mandrakelinux 。" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "警告！\n" "\n" "DrakX 現在將要重新調整您 Windows 分割區的大小。請注意：這個動作\n" "是很危險的。如果您不曾做過，您必須先離開安裝程式，在 Windows 命\n" "令提示字元下執行 \"chkdsk c:\" (請注意，執行圖形介面的程式 \n" "\"scandisk\" 並不夠，請確定是在命令提示下使用 \"chkdsk\" ！)，\n" "您還可以額外執行 defrag，然後重新開始安裝。您也應該備份您的資料\n" "。當您確定之後，請按下確定。" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "您要保留多少空間給 Windows 使用" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "分割區 %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "正在重新調整 Windows 分割區大小" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT 重新調整大小失敗： %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "移除 Windows(TM)" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "你有多於一個硬碟, 您打算那一個安裝 linux?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "使用 fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "您現在可以對 %s 分割區進行劃分動作.\n" "當您完成時, 別忘了使用 'w' 儲存" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "找不到任何可用的安裝空間" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX 分割巫師找到了下列解決方案:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "硬碟分割失敗: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "帶起網路" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "關閉網路" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" "恭喜您！系統已經完成安裝。\n" "請取出開機媒介並按下 return 以重新開機。\n" "\n" "\n" "要獲得這個 Mandrakelinux 釋出版本可用的修正相關資訊，\n" "請諮詢可用的勘誤表：\n" "\n" "\n" "%s\n" "\n" "\n" "關於如何設定您系統的資訊可以在官方 Mandrakelinux 使用者指南\n" "(Official Mandrakelinux User's Guide) 的安裝後章節 (post install chapter )\n" "裡面找到。" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrakelinux.com/en/errata.php3" msgstr "http://www.mandrakelinux.com/en/errata.php3" #: install_steps.pm:246 #, c-format msgid "Duplicate mount point %s" msgstr "重複的掛載點 %s" #: install_steps.pm:479 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "有某些重要的套件沒有被適當地安裝。\n" "可能是您的光碟機或者是光碟片有缺陷。\n" "請將光碟放在一個已經安裝好的電腦上使用 \"rpm -qpl media/main/*.rpm\" 來檢查\n" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "進入步驟 `%s'\n" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "您的系統資源太少。您可能會在安裝 Mandrakelinux 過程中遇到問題。\n" "若是真的發生問題，您或許可以改用文字模式的安裝方式來取代。\n" "要如此作的話m，請在光碟開機時按下 `F1'，然後輸入 `text'。" #: install_steps_gtk.pm:228 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "套件群組選擇" #: install_steps_gtk.pm:254 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "總共大小： %d / %d MB" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "壞掉的套件" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "版本：" #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "大小：" #: install_steps_gtk.pm:302 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "重要性：" #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "您不可以選擇/取消選擇這個套件" #: install_steps_gtk.pm:340 #, c-format msgid "due to missing %s" msgstr "因為遺失 %s" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "由於 %s 未被滿足" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "正在嘗試促進 %s" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "為了要保留 %s" #: install_steps_gtk.pm:348 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "您不可以選取這個套件，因為剩餘的空間不足以安裝它。" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "下列的套件將會被安裝上" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "下列的套件將會被移除" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "這是一個必要的套件，您不可以選擇不要安裝這個套件" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "您不可以不選這個套件。它已經被安裝上了。" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "這個套件一定要更新才行。\n" "您確定您不要選它嗎？" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "您不可以不選這個套件，它一定要更新才行。" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "顯示自動被選取的套件" #: install_steps_gtk.pm:394 #, c-format msgid "Load/Save selection" msgstr "載入/儲存選取" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "正在更新套件的選擇" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "最小安裝" #: install_steps_gtk.pm:414 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "選擇您想要安裝的套件" #: install_steps_gtk.pm:430 install_steps_interactive.pm:706 #, c-format msgid "Installing" msgstr "正在安裝" #: install_steps_gtk.pm:437 #, c-format msgid "Estimating" msgstr "正在估計" #: install_steps_gtk.pm:486 #, c-format msgid "No details" msgstr "沒有詳細資訊" #: install_steps_gtk.pm:494 #, c-format msgid "Time remaining " msgstr "剩餘時間" #: install_steps_gtk.pm:501 #, c-format msgid "Please wait, preparing installation..." msgstr "請稍候，正在準備安裝..." #: install_steps_gtk.pm:516 #, c-format msgid "%d packages" msgstr "%d 套件" #: install_steps_gtk.pm:521 #, c-format msgid "Installing package %s" msgstr "正在安裝套件 %s" #: install_steps_gtk.pm:556 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 #, c-format msgid "Refuse" msgstr "拒絕" #: install_steps_gtk.pm:560 install_steps_interactive.pm:735 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "更換光碟片！\n" "請插入標示為為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。\n" "若是您沒有這片光碟，請點選取消以略過這一片光碟的安裝。" #: install_steps_gtk.pm:575 install_steps_interactive.pm:746 #, c-format msgid "There was an error ordering packages:" msgstr "排列套件時發生錯誤：" #: install_steps_gtk.pm:575 install_steps_gtk.pm:579 #: install_steps_interactive.pm:746 install_steps_interactive.pm:750 #, c-format msgid "Go on anyway?" msgstr "無論如何都要繼續嗎？" #: install_steps_gtk.pm:579 install_steps_interactive.pm:750 #, c-format msgid "There was an error installing packages:" msgstr "安裝套件時發生錯誤：" #: install_steps_gtk.pm:621 install_steps_interactive.pm:921 #: install_steps_interactive.pm:1073 #, c-format msgid "not configured" msgstr "未被設定" #: install_steps_gtk.pm:684 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "已經找到下列的安裝媒介。\n" "如果您想略過它們，您現在可以將它們取消選取。" #: install_steps_gtk.pm:693 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "您可以選擇在安裝前將光碟的內容複製到硬碟。稍候將會由硬碟繼續安裝，並且這些套" "件\n" "在安裝完畢之後仍然可以繼續使用。" #: install_steps_gtk.pm:695 #, c-format msgid "Copy whole CDs" msgstr "複製整張光碟" #: install_steps_interactive.pm:85 #, c-format msgid "License agreement" msgstr "版權協議" #: install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "發行紀錄" #: install_steps_interactive.pm:119 #, c-format msgid "Please choose your keyboard layout." msgstr "請選取鍵盤排列的樣式。" #: install_steps_interactive.pm:121 #, c-format msgid "Here is the full list of available keyboards" msgstr "以下是所有可用的的鍵盤" #: install_steps_interactive.pm:151 #, c-format msgid "Install/Upgrade" msgstr "安裝/升級" #: install_steps_interactive.pm:152 #, c-format msgid "Is this an install or an upgrade?" msgstr "這是安裝或是升級？" #: install_steps_interactive.pm:158 #, c-format msgid "Upgrade %s" msgstr "升級 %s" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "加密金鑰於 %s" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "請選取您滑鼠的形式。" #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "滑鼠連接埠" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "請選取您滑鼠連接的序列埠。" #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "按鍵模擬" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "第二鍵模擬" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "第三鍵模擬" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "正在設定 PCMCIA 卡..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "正在設定 IDE" #: install_steps_interactive.pm:256 network/tools.pm:181 #, c-format msgid "No partition available" msgstr "沒有可用的分割區" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "正在掃描分割區以尋找掛載點" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "選取掛載點" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "沒有足夠的可用空間安裝 bootstrap！安裝還是會繼續，但是您必須在 DiskDrake\n" "中建立 bootstrap 分割來啟動您的系統" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "您需要建立一個 PPC PReP 開機 bootstrap！安裝還是會繼續, 但是您必須在 " "DiskDrake\n" "中建立 bootstrap 分割來啟動您的系統" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "選擇要格式化的分割區" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "檢查壞掉的區塊?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "無法檢查檔案系統 %s. 您要修復該錯誤嗎? (請注意, 您可能遺失資料)" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝, 請增加一些" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "正在搜尋可以用的套件並且建立 rpm 資料庫..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "正在搜尋可以用的套件..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "正在查看已經安裝過的套件..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "正在搜尋要升級的套件..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:826 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "選取要用來抓取程式套件檔的 FTP 映射站台" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "您的系統沒有足夠的空間可以用來安裝或升級了 (%d > %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "請選擇要載入或者儲存套件選擇到磁片上。\n" "它使用與自動安裝所產生的磁片相同的格式。" #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "負載" #: install_steps_interactive.pm:497 standalone/drakbackup:3931 #: standalone/drakbackup:4004 standalone/drakroam:206 standalone/logdrake:173 #, c-format msgid "Save" msgstr "儲存" #: install_steps_interactive.pm:505 #, c-format msgid "Bad file" msgstr "損壞的檔案" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "所選取的大小超過可用的空間" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "安裝類型" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "您並未選取任何套件群組.\n" "請選擇您想要的最小安裝:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "包含基本的說明文件 (被建議的!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "真正最小安裝 (尤其無 urpmi)" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "全部" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "如果您有下面清單內所列出的 CD, 請點選 Ok 確定.\n" "如果都沒有的話, 請點選 Cancel 取消.\n" "如果有一些項目您並沒有的話, 把該項目取消選取, 然後按下 Ok 確定." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "標籤為 \"%s\" 的 Cd-Rom" #: install_steps_interactive.pm:706 #, c-format msgid "Preparing installation" msgstr "正在準備安裝" #: install_steps_interactive.pm:715 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "正在安裝 %s 套件\n" "%d%%" #: install_steps_interactive.pm:764 #, c-format msgid "Post-install configuration" msgstr "安裝後的設定" #: install_steps_interactive.pm:771 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:800 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "您現在有機會下載更新套件. 這些套件在發行版釋放之後已經被更新過了.\n" "他們或許有安全性或臭蟲修正.\n" "\n" "要下載這些套件, 您將需要有可工作的網際網路連線.\n" "\n" "您想要安裝更新嗎?" #: install_steps_interactive.pm:821 #, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "連結到 Mirror Linux Web Site 查詢可用的映射站台" #: install_steps_interactive.pm:840 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "聯繫映射站台取得可用的程式套件列表..." #: install_steps_interactive.pm:844 #, c-format msgid "Unable to contact mirror %s" msgstr "無法聯繫映射站台 %s" #: install_steps_interactive.pm:844 #, c-format msgid "Would you like to try again?" msgstr "您要再試一次嗎?" #: install_steps_interactive.pm:870 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "您的時區為何?" #: install_steps_interactive.pm:875 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "自動時間同步(使用 NTP 服務)" #: install_steps_interactive.pm:883 #, c-format msgid "NTP Server" msgstr "NTP 伺服器" #: install_steps_interactive.pm:925 steps.pm:30 #, c-format msgid "Summary" msgstr "總結" #: install_steps_interactive.pm:938 install_steps_interactive.pm:946 #: install_steps_interactive.pm:964 install_steps_interactive.pm:971 #: install_steps_interactive.pm:1125 services.pm:133 #: standalone/drakbackup:1602 #, c-format msgid "System" msgstr "系統" #: install_steps_interactive.pm:978 install_steps_interactive.pm:1005 #: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038 #: install_steps_interactive.pm:1049 #, c-format msgid "Hardware" msgstr "硬體" #: install_steps_interactive.pm:984 install_steps_interactive.pm:993 #, c-format msgid "Remote CUPS server" msgstr "遠端 CUPS 伺服器" #: install_steps_interactive.pm:984 #, c-format msgid "No printer" msgstr "無印表機" #: install_steps_interactive.pm:1026 #, c-format msgid "Do you have an ISA sound card?" msgstr "您有 ISA 音效卡嗎?" #: install_steps_interactive.pm:1028 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "請在安裝完畢後, 執行 \"alsaconf\" 或 \"sndconfig\" 來設定您的音效卡" #: install_steps_interactive.pm:1030 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "沒偵測到任何音效卡. 請在安裝後嘗試 \"harddrake\" 進行設定" #: install_steps_interactive.pm:1050 #, c-format msgid "Graphical interface" msgstr "圖形介面" #: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071 #, c-format msgid "Network & Internet" msgstr "網路 & 網際網路" #: install_steps_interactive.pm:1073 #, c-format msgid "configured" msgstr "已設定" #: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096 #: steps.pm:20 #, c-format msgid "Security" msgstr "安全性" #: install_steps_interactive.pm:1101 #, c-format msgid "activated" msgstr "以啟動" #: install_steps_interactive.pm:1101 #, c-format msgid "disabled" msgstr "已停用" #: install_steps_interactive.pm:1112 #, c-format msgid "Boot" msgstr "重新開機" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1116 #, c-format msgid "%s on %s" msgstr "%2$s 上的 %1$s" #: install_steps_interactive.pm:1130 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "服務: %d 已經啟動 給 %d 註冊的項目" #: install_steps_interactive.pm:1140 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "您尚未設定 X。您確定您真的要這樣做？" #: install_steps_interactive.pm:1220 #, c-format msgid "Preparing bootloader..." msgstr "正在準備開機載入器..." #: install_steps_interactive.pm:1230 #, fuzzy, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" "您的系統似乎有 OldWorld 或者是其他不認識的機器,\n" "這將會導致 yaboot 開機載入器無法正常運作.\n" "安裝還是會繼續下去, 不過您將需要使用 bootX 或某些其他方法來開機你的機器." #: install_steps_interactive.pm:1236 #, c-format msgid "Do you want to use aboot?" msgstr "您要使用 aboot 嗎?" #: install_steps_interactive.pm:1239 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "安裝 aboot 時發生錯誤,\n" "你要冒著可能毀損第一個分割區的危險強迫安裝嗎?" #: install_steps_interactive.pm:1260 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1289 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "請在 %s 中插入一片空白軟片" #: install_steps_interactive.pm:1294 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "請插入另一張軟片給驅動磁碟" #: install_steps_interactive.pm:1296 #, c-format msgid "Creating auto install floppy..." msgstr "正在製作自動安裝軟片..." #: install_steps_interactive.pm:1308 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "還有些步驟沒有完成.\n" "\n" "您確定要結束安裝程式?" #: install_steps_interactive.pm:1324 #, c-format msgid "Generate auto install floppy" msgstr "製作自動安裝軟片" #: install_steps_interactive.pm:1326 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "auto install 想要的話可以完全自動化, 在那種情況下它將接管硬碟!!\n" "\n" "(這是要安裝於另一台機器上的).\n" "您或許想要重演安裝.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Mandrakelinux 安裝程式 %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr " / 在元件間移動 | 選取 | 下個螢幕 " #: interactive.pm:193 #, c-format msgid "Choose a file" msgstr "選擇一個檔案" #: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1543 #: standalone/drakfont:656 standalone/drakroam:214 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Add" msgstr "增加" #: interactive.pm:318 interactive/gtk.pm:489 #, c-format msgid "Modify" msgstr "修改" #: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:198 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Remove" msgstr "移除" #: interactive.pm:395 #, c-format msgid "Basic" msgstr "基本" #: interactive.pm:433 interactive/newt.pm:319 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "完成" #: interactive/newt.pm:94 #, c-format msgid "Do" msgstr "做" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "壞選擇, 再試一遍\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "您的選擇? (預設為 %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "欄位項目您需要輸入:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "您的選擇? (0/1, 預設為 `%s') " #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "按鈕 `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "您要按這個按鈕嗎?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "您的選擇? (預設為 `%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " 輸入 `void' 表示空的項目" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> %s 上有很多的事物可供選擇.\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "請選取前 10 個項目中您要編輯的第一個數字, 或者按下 Enter 繼續.\n" "您選擇是?" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> 請注意, 一個標籤已經變更了:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "重新送出" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "捷克 (QWERTZ)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "德國" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "西班牙" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "芬蘭" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "法國" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "挪威" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "波蘭" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "俄羅斯" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "瑞典" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "英式鍵盤" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "美式鍵盤" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "阿爾巴尼亞" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "亞美尼亞 (舊式)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "亞美尼亞 (typewriter)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "亞美尼亞 (phonetic)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Arabic" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "蘇聯共和國 (latin)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "比利時" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "孟加拉 (Inscript 式配置)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "孟加拉 (Probhat)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "保加利亞 (phonetic)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "保加利亞 (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "巴西 (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "愛沙尼亞" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "白俄羅斯" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "瑞士 (德式配置)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "瑞士 (法式配置)" #: keyboard.pm:204 #, fuzzy, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Arabic" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "捷克 (QWERTY)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "德語 (no dead keys)" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "梵文" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "丹麥語" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (美式)" #: keyboard.pm:213 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (世界語)" #: keyboard.pm:215 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (法式)" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (英式)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (挪威)" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (波蘭)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (瑞典)" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "不丹宗卡語/泰語" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "愛沙尼亞" #: keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "法羅語" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "喬治亞 (\"俄式\" 配置)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "喬治亞 (\"拉丁式\" 配置)" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "希臘" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "希臘 (polytonic)" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "古吉拉特語" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "古爾穆希語" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "克羅埃西亞" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "匈牙利" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "愛爾蘭" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "以色列" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "以色列 (音標)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "伊朗" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "冰島" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "義大利" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "伊努克梯圖語" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "日本 106 鍵" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "卡納塔克語" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "韓式鍵盤" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "庫德語 (arabic script)" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "吉爾吉斯語" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "拉丁美洲" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "寮國" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "立陶宛 (舊 AZERTY 式)" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "立陶宛 (新 AZERTY 式)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "立陶宛 \"number row, QWERTY 式\"" #: keyboard.pm:263 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "立陶宛 \"phonetic, QWERTY 式\"" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "拉托維亞" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "馬拉雅拉姆語" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "馬其頓" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "緬甸語 (Burmese)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "蒙古語 (cyrillic)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "馬爾他語 (UK)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "馬爾他語 (US)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "荷蘭" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "奧里雅語" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "波蘭 (qwerty 式配置)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "波蘭 (qwertz 式配置)" #: keyboard.pm:277 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "波蘭" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "葡萄牙" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "加拿大 (魁北克)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "羅馬尼亞 (qwertz)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "羅馬尼亞 (qwerty)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "俄羅斯 (音標)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "" #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "泰式鍵盤" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "斯洛法尼亞" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "斯洛法克 (QWERTZ)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "斯洛法克 (QWERTY)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "塞爾維亞 (cyrillic)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Syriac" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "利亞語 (phonetic)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "坦米爾 (ISCII-佈置)" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "亞美尼亞 (Typewriter-佈置)" #: keyboard.pm:304 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "泰式鍵盤" #: keyboard.pm:305 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "泰式鍵盤" #: keyboard.pm:307 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "泰式鍵盤" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Tajik 鍵盤" #: keyboard.pm:315 #, fuzzy, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "德國" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "土耳其 (傳統式 \"F\" 型)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "土耳其 (現代式 \"Q\" 型)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "烏克蘭" #: keyboard.pm:322 #, fuzzy, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "韓式鍵盤" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "美式鍵盤 (國際型)" #: keyboard.pm:325 #, fuzzy, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "塞爾維亞 (cyrillic)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "越南 \"numeric row\" QWERTY 式" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "南斯拉夫 (拉丁)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "右方 Alt 按鍵" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "同時兩邊 Shift 按鍵" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Control 與 Shift 鍵同時" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock 按鍵" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Shift 與 CapsLock 鍵同時" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl 與 Alt 鍵同時" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt 與 Shift 鍵同時" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"選單\" 按鍵" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "左邊 \"Windows\" 按鍵" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "右邊 \"Windows\" 按鍵" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "同時兩邊 Control 按鍵" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "同時兩邊 Alt 按鍵" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "左邊 Shift 按鍵" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "右邊 Shift 按鍵" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "左邊 Alt 按鍵" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "左邊 Control 按鍵" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "右邊 Control 按鍵" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "請選擇按鍵或組合鍵, 以便於快速的切換不同的鍵盤配置\n" "(eg: 拉丁與非拉丁)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "安道爾" #: lang.pm:196 network/adsl_consts.pm:933 #, c-format msgid "United Arab Emirates" msgstr "阿拉伯聯合大公國" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "阿富汗" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "安地卡及巴布達" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "安圭拉島" #: lang.pm:200 #, c-format msgid "Albania" msgstr "阿爾巴尼亞" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "亞美尼亞" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "荷屬安地列斯群島" #: lang.pm:203 #, c-format msgid "Angola" msgstr "安哥拉" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "南極洲" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "阿根廷" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "美屬薩摩亞" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "阿魯巴島" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "阿塞拜然" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "波斯尼亞及黑塞哥維那" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "巴巴多斯島" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "孟加拉" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "布吉納法索" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "保加利亞" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "巴林" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "蒲隆地" #: lang.pm:219 #, c-format msgid "Benin" msgstr "貝南" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "百慕達" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "汶萊" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "玻利維亞" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "巴哈馬" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "不丹" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "波維特島" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "波札那" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "白俄羅斯" #: lang.pm:229 #, c-format msgid "Belize" msgstr "貝里斯" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "可可斯群島" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "中非共和國" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "象牙海岸" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "庫克群島" #: lang.pm:238 #, c-format msgid "Chile" msgstr "智利" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "喀麥隆" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "中國" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "哥倫比亞" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "塞爾維亞及芒特尼格羅共和國" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "古巴" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "維德角島" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "聖誕島" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "賽普勒斯" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "吉布地" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "多米尼克聯邦" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "多明尼加共和國" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "阿爾及利亞" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "厄瓜多" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "埃及" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "西撒哈拉" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "厄利垂亞" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "依索比亞" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "斐濟群島" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "福克蘭群島" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "密克羅尼西亞" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "法羅群島" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "加彭" #: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955 #: network/netconnect.pm:53 #, c-format msgid "United Kingdom" msgstr "英國" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "格瑞那達" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "喬治亞" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "法屬幾內亞" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "迦納" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "直布羅陀" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "格陵蘭島" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "甘比亞" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "幾內亞" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "瓜德魯普島" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "赤道幾內亞" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "瓜地馬拉" #: lang.pm:283 #, c-format msgid "Guam" msgstr "關島" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "幾內亞比索" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "蓋亞那" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "香港 SAR (中國)" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "赫德及麥當勞群島" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "宏都拉斯" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "克羅地亞" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "海地" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "印度尼西亞" #: lang.pm:295 #, c-format msgid "India" msgstr "印度" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "大不列顛印度海洋領土" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "伊拉克" #: lang.pm:298 #, c-format msgid "Iran" msgstr "伊朗" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "冰島" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "牙買加" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "約旦" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "肯亞" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "吉爾吉斯" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "柬埔寨" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "吉里巴斯" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "葛摩" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "聖克里斯多福" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "北韓" #: lang.pm:311 #, c-format msgid "Korea" msgstr "韓國" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "科威特" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "開曼群島" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "哈薩克" #: lang.pm:315 #, c-format msgid "Laos" msgstr "寮國" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "黎巴嫩" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "聖露西亞" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "列支敦斯登" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "斯里蘭卡" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "利比利亞" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "賴索托" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "立陶宛" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "森堡" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "拉脫維亞" #: lang.pm:325 #, c-format msgid "Libya" msgstr "利比亞" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "摩洛哥" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "摩納哥" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "摩爾多瓦" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "馬達加斯加" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "馬紹爾群島" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "馬其頓" #: lang.pm:332 #, c-format msgid "Mali" msgstr "馬里" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "緬甸文字" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "蒙古" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "北馬里亞納群島" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "聖馬丁節" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "茅利塔尼亞" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "蒙瑟拉特島" #: lang.pm:339 #, c-format msgid "Malta" msgstr "馬爾他" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "模里西斯" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "馬爾地夫" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "馬拉威" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "墨西哥" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "馬來西亞" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "莫三比克" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "納米比亞" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "新喀里多尼亞群島" #: lang.pm:348 #, c-format msgid "Niger" msgstr "尼日" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "諾福克群島" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "奈及利亞" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "尼加拉瓜" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "尼泊爾" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "諾魯" #: lang.pm:356 #, c-format msgid "Niue" msgstr "紐威島" #: lang.pm:358 #, c-format msgid "Oman" msgstr "阿曼" #: lang.pm:359 #, c-format msgid "Panama" msgstr "巴拿馬" #: lang.pm:360 #, c-format msgid "Peru" msgstr "秘魯" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "法屬玻里尼西亞" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "巴布亞紐幾內亞" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "菲律賓" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "巴基斯坦" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "聖匹及密啟倫群島" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "皮特康" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "波多黎各" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "巴拉圭" #: lang.pm:372 #, c-format msgid "Palau" msgstr "帛琉群島" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "卡達" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "留尼旺" #: lang.pm:375 #, c-format msgid "Romania" msgstr "羅馬尼亞" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "盧旺達" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "沙烏地阿拉伯" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "所羅門群島" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "塞席爾" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "蘇丹" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "新加坡" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "聖赫勒拿島" #: lang.pm:385 network/adsl_consts.pm:737 #, c-format msgid "Slovenia" msgstr "斯洛維尼亞" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "斯瓦巴及尖棉島" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "獅子山" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "聖馬利諾" #: lang.pm:390 #, c-format msgid "Senegal" msgstr "塞內加爾" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "索馬利亞" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "蘇里南" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "聖多美普林西比" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "薩爾瓦多" #: lang.pm:395 #, c-format msgid "Syria" msgstr "敘利亞" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "史瓦濟蘭" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "土克斯及開科斯群島" #: lang.pm:398 #, c-format msgid "Chad" msgstr "查德" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "法屬南部屬地" #: lang.pm:400 #, c-format msgid "Togo" msgstr "多哥" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "塔吉克" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "托克勞群島" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "東帝汶" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "土庫曼" #: lang.pm:406 network/adsl_consts.pm:921 #, c-format msgid "Tunisia" msgstr "突尼西亞" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "東加" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "土耳其" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "千里達及托巴哥" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "吐瓦魯" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "坦尚尼亞" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "烏克蘭" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "烏干達" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "美屬邊疆群島" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "烏拉圭" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "烏茲別克" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "梵諦岡" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "聖文森及格瑞那丁" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "委內瑞拉" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "英屬維爾京群島" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "美屬維爾京群島" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "越南" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "萬那杜" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "薩摩亞群島" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "葉門" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "美亞特" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "尚比亞" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "辛巴威" #: lang.pm:1060 #, c-format msgid "You should install the following packages: %s" msgstr "您應該安裝下列套件： %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1063 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1116 #, c-format msgid "Welcome to %s" msgstr "歡迎使用 %s" #: loopback.pm:31 #, c-format msgid "Circular mounts %s\n" msgstr "循環掛載 %s\n" #: lvm.pm:112 #, c-format msgid "Remove the logical volumes first\n" msgstr "先移除邏輯 volume\n" #: modules/interactive.pm:21 standalone/drakconnect:1068 #, c-format msgid "Parameters" msgstr "參數" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "無" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "模組組態設定" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "您可以在這邊輸入該模組的每一個參數。" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "找到 %s 介面" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "您還有其他的嗎？" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "你是否有任何 %s 介面？" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "觀看硬體資訊" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "正在安裝 USB 控制器的驅動程式" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "正在安裝 Firewire 控制器的驅動程式 %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "正在安裝硬碟控制器的驅動程式 %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "正在安裝網路卡控制器的驅動程式 %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "正在安裝 %s 卡的驅動程式 %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(模組 %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "您現在可以為模組 %s 提供選項。\n" "請注意，您輸入的記憶體位置以 0x 開頭，例如 '0x123'" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "您現在可以為模組 %s 提供選項。\n" "選項的格式為 ``name=value name2=value2 ...''\n" "例如 ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "模組選項：" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "我應該試那個 %s 驅動程式呢？" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "某些時候, %s 驅動程式需要有附加的資訊以便適當工作,\n" "雖然它正常來說可以沒有他們而好好的工作. 您想要指定附加的選項給它嗎\n" "或是允許驅動程式偵測您的機器需要取得驅動程式需要的資訊?有時候偵測會讓電腦當" "機, 不過應該不至於造成任何傷害才對." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "自動偵測" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "指定選項" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "載入 %s 模組失敗.\n" "您要用其他參數再試一次嗎?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "一個數字" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d 用分號分隔的數字" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d 用分號分隔的字串" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "用逗號分隔的數字" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "用逗號分隔的字串" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - 滑鼠" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "標準" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "一般 PS/2 滾輪滑鼠" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 #: network/modem.pm:137 network/netconnect.pm:692 network/netconnect.pm:697 #: network/netconnect.pm:709 network/netconnect.pm:714 #: network/netconnect.pm:730 network/netconnect.pm:732 #, c-format msgid "Automatic" msgstr "自動" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "一個按鍵" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "一般的兩鍵式滑鼠" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "一般的三鍵式滑鼠有滾輪模擬" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "滾輪" #: mouse.pm:55 #, c-format msgid "serial" msgstr "序列" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "一般的三鍵式滑鼠" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech Bus Mouse" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "有滾輪模擬的 Logitech MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "有滾輪模擬的 Logitech CC Series" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serial, old C7 type)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "有滾輪模擬的 Logitech Mouse (serial, old C7 type)" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "有滾輪模擬的 Kensington Thinking Mouse" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmouse" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "兩個按鍵" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "三個按鍵" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "有滾輪模擬的三個按鍵" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "通用" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "任何 PS/2 與 USB 滑鼠" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft Explorer" #: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140 #, c-format msgid "none" msgstr "無" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "無滑鼠" #: mouse.pm:299 mouse.pm:362 mouse.pm:371 mouse.pm:430 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:556 #, c-format msgid "Please test the mouse" msgstr "請測試滑鼠" #: mouse.pm:558 #, c-format msgid "To activate the mouse," msgstr "為了驅動您的滑鼠" #: mouse.pm:559 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "請滾動您的滾輪！" #: network/adsl.pm:19 #, c-format msgid "use PPPoE" msgstr "使用 PPPoE" #: network/adsl.pm:20 #, c-format msgid "use PPTP" msgstr "使用 PPTP" #: network/adsl.pm:21 #, c-format msgid "use DHCP" msgstr "使用 DHCP" #: network/adsl.pm:22 #, c-format msgid "Alcatel Speedtouch USB" msgstr "Alcatel Speedtouch USB" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr " - 已偵測到" #: network/adsl.pm:23 #, c-format msgid "Sagem (using PPPoA) USB" msgstr "" #: network/adsl.pm:24 #, c-format msgid "Sagem (using DHCP) USB" msgstr "" #: network/adsl.pm:35 network/netconnect.pm:898 #, c-format msgid "Connect to the Internet" msgstr "連線到 Internet" #: network/adsl.pm:36 network/netconnect.pm:899 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" "最常連線到 ADSL 的方法就是使用 pppoe.\n" "有些連線是使用 PPTP, 有些事使用 DHCP.\n" "若是您不清楚的話, 選擇 '使用 PPPoE'" #: network/adsl.pm:41 network/netconnect.pm:903 #, c-format msgid "ADSL connection type:" msgstr "ADSL 連線型態:" #: network/drakfirewall.pm:12 share/compssUsers.pl:84 #, c-format msgid "Web Server" msgstr "Web 伺服器" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "網域名稱伺服器" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "SSH 伺服器" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP 伺服器" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Mail 伺服器" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP 與 IMAP 伺服器" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Telnet 伺服器" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "Wndows 檔案分享 (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "CUPS 伺服器" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "回應要求 (ping)" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "drakfirewall 設定程式\n" "\n" "這是用來設定個人防火牆給 Mandrakelinux 機器.\n" "若是您需要很致力強大的防火牆解決方案, 請您參閱\n" "專門的 MandrakeSecurity Firewall distribution 產品資訊." #: network/drakfirewall.pm:164 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: network/drakfirewall.pm:181 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "那一種服務您要允許網際網路來連線呢?" #: network/drakfirewall.pm:182 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "您可以輸入各種的 port.\n" "有效的例子為: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "查看 /etc/services 以取得資訊." #: network/drakfirewall.pm:188 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" #: network/drakfirewall.pm:198 #, c-format msgid "Everything (no firewall)" msgstr "全部 (沒有 firewall)" #: network/drakfirewall.pm:200 #, c-format msgid "Other ports" msgstr "其它埠" #: network/isdn.pm:124 network/netconnect.pm:539 network/netconnect.pm:653 #: network/netconnect.pm:656 network/netconnect.pm:814 #: network/netconnect.pm:818 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:167 network/netconnect.pm:471 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:167 network/netconnect.pm:471 #, c-format msgid "I do not know" msgstr "我不清楚" #: network/isdn.pm:168 network/netconnect.pm:471 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:169 network/netconnect.pm:471 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/netconnect.pm:697 network/netconnect.pm:714 #: network/netconnect.pm:730 #, c-format msgid "Manual" msgstr "手動" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "請選取 Windows 驅動程式 (.inf 檔)" #: network/ndiswrapper.pm:41 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver ?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:91 network/netconnect.pm:568 #: network/netconnect.pm:572 #, c-format msgid "Manual choice" msgstr "手動選擇" #: network/netconnect.pm:91 #, c-format msgid "Internal ISDN card" msgstr "內部 ISDN 卡" #: network/netconnect.pm:103 printer/printerdrake.pm:1418 #: standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "手動組態設定" #: network/netconnect.pm:104 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "自動 IP (BOOTP/DHCP)" #: network/netconnect.pm:106 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "自動 IP (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:109 #, c-format msgid "Protocol for the rest of the world" msgstr "其他世界的的通訊協定" #: network/netconnect.pm:111 standalone/drakconnect:574 #, c-format msgid "European protocol (EDSS1)" msgstr "歐洲人的通訊協定 (EDSS1)" #: network/netconnect.pm:112 standalone/drakconnect:575 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "其他世界的通訊協定\n" "無 D-Channel (leased lines)" #: network/netconnect.pm:148 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch USB 數據機" #: network/netconnect.pm:149 #, c-format msgid "Sagem USB modem" msgstr "Sagem USB 數據機" #: network/netconnect.pm:150 #, c-format msgid "Bewan modem" msgstr "Bewan 數據機" #: network/netconnect.pm:151 #, c-format msgid "ECI Hi-Focus modem" msgstr "ECI Hi-Focus 數據機" #: network/netconnect.pm:155 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:156 #, c-format msgid "Manual TCP/IP configuration" msgstr "手動組態設定 TCP/IP" #: network/netconnect.pm:157 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:158 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:159 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:160 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:164 #, c-format msgid "Bridged Ethernet LLC" msgstr "" #: network/netconnect.pm:165 #, c-format msgid "Bridged Ethernet VC" msgstr "" #: network/netconnect.pm:166 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:167 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:168 #, c-format msgid "PPPoA LLC" msgstr "" #: network/netconnect.pm:169 #, c-format msgid "PPPoA VC" msgstr "" #: network/netconnect.pm:173 standalone/drakconnect:509 #, c-format msgid "Script-based" msgstr "Script-based" #: network/netconnect.pm:174 standalone/drakconnect:509 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:175 standalone/drakconnect:509 #, c-format msgid "Terminal-based" msgstr "Terminal-based" #: network/netconnect.pm:176 standalone/drakconnect:509 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:177 standalone/drakconnect:509 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:182 #, c-format msgid "Open WEP" msgstr "" #: network/netconnect.pm:183 #, c-format msgid "Restricted WEP" msgstr "" #: network/netconnect.pm:184 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: network/netconnect.pm:287 standalone/drakconnect:60 #, c-format msgid "Network & Internet Configuration" msgstr "網路 & 網際網路設定" #: network/netconnect.pm:293 #, c-format msgid "(detected on port %s)" msgstr "(於 port %s 被偵測到)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:295 #, c-format msgid "(detected %s)" msgstr "(偵測到 %s)" #: network/netconnect.pm:295 #, c-format msgid "(detected)" msgstr "(被偵測到)" #: network/netconnect.pm:297 #, c-format msgid "Modem connection" msgstr "Modem 連線" #: network/netconnect.pm:298 #, c-format msgid "ISDN connection" msgstr "ISDN 連線" #: network/netconnect.pm:299 #, c-format msgid "ADSL connection" msgstr "ADSL 連線" #: network/netconnect.pm:300 #, c-format msgid "Cable connection" msgstr "Cable 連線" #: network/netconnect.pm:301 #, c-format msgid "LAN connection" msgstr "區域網路連線" #: network/netconnect.pm:302 network/netconnect.pm:316 #, c-format msgid "Wireless connection" msgstr "無線網路連線" #: network/netconnect.pm:312 #, c-format msgid "Choose the connection you want to configure" msgstr "選擇您要設定的連線項目" #: network/netconnect.pm:326 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "我們現在正要設定 %s 連線.\n" "\n" "\n" "按 \"%s\" 繼續." #: network/netconnect.pm:334 network/netconnect.pm:949 #, c-format msgid "Connection Configuration" msgstr "連線組態設定" #: network/netconnect.pm:335 network/netconnect.pm:950 #, c-format msgid "Please fill or check the field below" msgstr "請您填入或檢查下面欄位" #: network/netconnect.pm:342 standalone/drakconnect:565 #, c-format msgid "Card IRQ" msgstr "卡的 IRQ" #: network/netconnect.pm:343 standalone/drakconnect:566 #, c-format msgid "Card mem (DMA)" msgstr "卡的 mem (DMA)" #: network/netconnect.pm:344 standalone/drakconnect:567 #, c-format msgid "Card IO" msgstr "卡的 IO" #: network/netconnect.pm:345 standalone/drakconnect:568 #, c-format msgid "Card IO_0" msgstr "卡的 IO_0" #: network/netconnect.pm:346 #, c-format msgid "Card IO_1" msgstr "卡的 IO_1" #: network/netconnect.pm:347 #, c-format msgid "Your personal phone number" msgstr "您的個人電話號碼" #: network/netconnect.pm:348 network/netconnect.pm:953 #, c-format msgid "Provider name (ex provider.net)" msgstr "提供者的名稱 (ex provider.net)" #: network/netconnect.pm:349 standalone/drakconnect:504 #, c-format msgid "Provider phone number" msgstr "提供者的電話號碼" #: network/netconnect.pm:350 #, c-format msgid "Provider DNS 1 (optional)" msgstr "提供者 DNS 1 (選擇性輸入)" #: network/netconnect.pm:351 #, c-format msgid "Provider DNS 2 (optional)" msgstr "提供者 DNS 2 (選擇性輸入)" #: network/netconnect.pm:352 standalone/drakconnect:455 #, c-format msgid "Dialing mode" msgstr "撥接的模式" #: network/netconnect.pm:353 standalone/drakconnect:460 #: standalone/drakconnect:528 #, c-format msgid "Connection speed" msgstr "連線速度" #: network/netconnect.pm:354 standalone/drakconnect:465 #, c-format msgid "Connection timeout (in sec)" msgstr "連線逾時 (以秒為單位)" #: network/netconnect.pm:357 network/netconnect.pm:378 #: network/netconnect.pm:956 standalone/drakconnect:502 #, c-format msgid "Account Login (user name)" msgstr "帳號登入 (使用者名稱)" #: network/netconnect.pm:358 network/netconnect.pm:379 #: network/netconnect.pm:957 standalone/drakconnect:503 #, c-format msgid "Account Password" msgstr "帳號的密碼" #: network/netconnect.pm:374 #, c-format msgid "Cable: account options" msgstr "Cable：帳號選項" #: network/netconnect.pm:377 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:411 network/netconnect.pm:767 #: network/netconnect.pm:992 #, c-format msgid "Select the network interface to configure:" msgstr "選取要設定的網路介面：" #: network/netconnect.pm:413 network/netconnect.pm:461 #: network/netconnect.pm:768 network/netconnect.pm:994 network/shorewall.pm:96 #: standalone/drakconnect:720 standalone/drakgw:224 standalone/drakvpn:221 #, c-format msgid "Net Device" msgstr "網路裝置" #: network/netconnect.pm:414 network/netconnect.pm:422 #, c-format msgid "External ISDN modem" msgstr "外接式 ISDN 數據機" #: network/netconnect.pm:460 standalone/harddrake2:215 #, c-format msgid "Select a device!" msgstr "選取一個裝置！" #: network/netconnect.pm:469 network/netconnect.pm:479 #: network/netconnect.pm:489 network/netconnect.pm:522 #: network/netconnect.pm:536 #, c-format msgid "ISDN Configuration" msgstr "ISDN 設定" #: network/netconnect.pm:470 #, c-format msgid "What kind of card do you have?" msgstr "您有那種的卡？" #: network/netconnect.pm:480 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "如果您使用的是 ISA 卡，下一個螢幕所顯示的數值應該是正確的。\n" "\n" "如果您使用的是 PCMCIA 卡，那您必須要知道這張卡的\"irq\" 與 \"io\"值。\n" #: network/netconnect.pm:484 #, c-format msgid "Continue" msgstr "繼續" #: network/netconnect.pm:484 #, c-format msgid "Abort" msgstr "放棄" #: network/netconnect.pm:490 #, c-format msgid "Which of the following is your ISDN card?" msgstr "下列何者是您的 ISDN 卡?" #: network/netconnect.pm:508 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" #: network/netconnect.pm:510 standalone/drakconnect:117 standalone/drakups:251 #: standalone/harddrake2:132 #, c-format msgid "Driver" msgstr "驅動程式" #: network/netconnect.pm:522 #, c-format msgid "Which protocol do you want to use?" msgstr "您要使用那個通訊協定?" #: network/netconnect.pm:524 standalone/drakconnect:117 #: standalone/drakconnect:311 standalone/drakconnect:573 #: standalone/drakvpn:1142 #, c-format msgid "Protocol" msgstr "通訊協定" #: network/netconnect.pm:536 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "選擇您的提供者.\n" "如果並沒有包含在清單內, 請選則未列在清單內(Unlisted)." #: network/netconnect.pm:538 network/netconnect.pm:652 #: network/netconnect.pm:813 #, c-format msgid "Provider:" msgstr "提供者:" #: network/netconnect.pm:553 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "系統不支援您的數據機。\n" "請到 http://www.linmodems.org 查詢。" #: network/netconnect.pm:565 #, c-format msgid "Select the modem to configure:" msgstr "選取要設定的數據機:" #: network/netconnect.pm:619 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "請選取您數據機連接的序列埠." #: network/netconnect.pm:650 #, c-format msgid "Select your provider:" msgstr "選擇您的提供者:" #: network/netconnect.pm:674 #, c-format msgid "Dialup: account options" msgstr "撥號: 帳號選項" #: network/netconnect.pm:677 #, c-format msgid "Connection name" msgstr "連線名稱" #: network/netconnect.pm:678 #, c-format msgid "Phone number" msgstr "電話號碼" #: network/netconnect.pm:679 #, c-format msgid "Login ID" msgstr "登入的 ID" #: network/netconnect.pm:694 network/netconnect.pm:727 #, c-format msgid "Dialup: IP parameters" msgstr "撥號: IP 參數" #: network/netconnect.pm:697 #, c-format msgid "IP parameters" msgstr "IP 參數" #: network/netconnect.pm:698 network/netconnect.pm:1106 #: printer/printerdrake.pm:460 standalone/drakconnect:117 #: standalone/drakconnect:327 standalone/drakconnect:915 #: standalone/drakups:286 #, c-format msgid "IP address" msgstr "IP 位址" #: network/netconnect.pm:699 #, c-format msgid "Subnet mask" msgstr "子網路遮罩" #: network/netconnect.pm:711 #, c-format msgid "Dialup: DNS parameters" msgstr "撥號：DNS 參數" #: network/netconnect.pm:714 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:715 #, c-format msgid "Domain name" msgstr "網域名稱" #: network/netconnect.pm:716 network/netconnect.pm:954 #: standalone/drakconnect:1033 #, c-format msgid "First DNS Server (optional)" msgstr "第一台 DNS 伺服器 (選擇性輸入)" #: network/netconnect.pm:717 network/netconnect.pm:955 #: standalone/drakconnect:1034 #, c-format msgid "Second DNS Server (optional)" msgstr "第二台 DNS 伺服器 (選擇性輸入)" #: network/netconnect.pm:718 #, c-format msgid "Set hostname from IP" msgstr "由 IP 設定主機名稱" #: network/netconnect.pm:730 standalone/drakconnect:338 #, c-format msgid "Gateway" msgstr "閘道" #: network/netconnect.pm:731 #, c-format msgid "Gateway IP address" msgstr "閘道 IP 位址" #: network/netconnect.pm:767 #, c-format msgid "ADSL configuration" msgstr "ADSL 設定" #: network/netconnect.pm:811 #, c-format msgid "Please choose your ADSL provider" msgstr "請選擇您的 ADSL 提供者" #: network/netconnect.pm:832 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "您需要 Alcatel 的微碼。\n" "您可以立即由磁碟片或 Windows 磁區安裝，或者先跳過等日後再執行。" #: network/netconnect.pm:836 network/netconnect.pm:841 #, c-format msgid "Use a floppy" msgstr "由磁片安裝" #: network/netconnect.pm:836 network/netconnect.pm:845 #, c-format msgid "Use my Windows partition" msgstr "由我的 Windows 磁區安裝" #: network/netconnect.pm:836 network/netconnect.pm:848 #, c-format msgid "Do it later" msgstr "稍後再執行" #: network/netconnect.pm:855 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "韌體複製失敗，找不到檔案 %s" #: network/netconnect.pm:862 #, c-format msgid "Firmware copy succeeded" msgstr "韌體複製成功" #: network/netconnect.pm:877 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "您需要 Alcatel 的微碼。\n" "請到下述網站下載：\n" "%s\n" "並複製檔案 mgmt.o 到 /usr/share/speedtouch" #: network/netconnect.pm:960 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:961 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:964 #, c-format msgid "Encapsulation:" msgstr "封裝:" #: network/netconnect.pm:982 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/netconnect.pm:994 #, c-format msgid "Manually load a driver" msgstr "手動載入驅動程式" #: network/netconnect.pm:994 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "使用 Windows 驅動程式 (藉由 ndiswrapper)" #: network/netconnect.pm:1001 printer/printerdrake.pm:3741 #, c-format msgid "Could not install the %s package!" msgstr "無法安裝 %s 套件！" #: network/netconnect.pm:1027 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Modifying the fields below will override this configuration.\n" "Do you really want to reconfigure this device?" msgstr "" "警告: 這個裝置先前已經被設定為連線到網際網路.\n" "修改下面欄位將會凌越這個設定.\n" "您真的想重新設定這個裝置?" #: network/netconnect.pm:1041 network/netconnect.pm:1520 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "恭喜！網路與網際網路組態已經設定完成了。\n" "\n" #: network/netconnect.pm:1058 #, c-format msgid "Zeroconf hostname resolution" msgstr "Zeroconf 主機名稱解析" #: network/netconnect.pm:1059 network/netconnect.pm:1093 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "正在設定網路裝置 %s (驅動程式 %s)" #: network/netconnect.pm:1060 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" #: network/netconnect.pm:1094 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "請輸入這台機器的 IP 設定。\n" "每個項目都應該用小數點間隔的 IP 位址來輸入\n" "(例如 1.2.3.4)。" #: network/netconnect.pm:1101 standalone/drakconnect:384 #, c-format msgid "Assign host name from DHCP address" msgstr "由 DHCP 位址指派主機名稱" #: network/netconnect.pm:1102 standalone/drakconnect:386 #, c-format msgid "DHCP host name" msgstr "DHCP 主機名稱" #: network/netconnect.pm:1107 standalone/drakconnect:332 #: standalone/drakconnect:916 standalone/drakgw:320 #, c-format msgid "Netmask" msgstr "網路遮罩" #: network/netconnect.pm:1109 standalone/drakconnect:448 #, c-format msgid "Track network card id (useful for laptops)" msgstr "紀錄網路卡的 ID (對於筆記型電腦相當有用)" #: network/netconnect.pm:1111 standalone/drakconnect:449 #, c-format msgid "Network Hotplugging" msgstr "網路熱插拔" #: network/netconnect.pm:1113 standalone/drakconnect:443 #, c-format msgid "Start at boot" msgstr "於開機時啟動" #: network/netconnect.pm:1115 standalone/drakconnect:471 #, fuzzy, c-format msgid "Metric" msgstr "限制" #: network/netconnect.pm:1117 standalone/drakconnect:380 #: standalone/drakconnect:919 #, c-format msgid "DHCP client" msgstr "DHCP 用戶端" #: network/netconnect.pm:1119 standalone/drakconnect:390 #, c-format msgid "DHCP timeout (in seconds)" msgstr "DHCP 連線逾時 (以秒為單位)" #: network/netconnect.pm:1120 standalone/drakconnect:393 #, c-format msgid "Get DNS servers from DHCP" msgstr "由 DHCP 取得 DNS 主機" #: network/netconnect.pm:1121 standalone/drakconnect:394 #, c-format msgid "Get YP servers from DHCP" msgstr "由 DHCP 取得 YP 伺服器" #: network/netconnect.pm:1122 standalone/drakconnect:395 #, c-format msgid "Get NTPD servers from DHCP" msgstr "由 DHCP 取得 NTPD 伺服器" #: network/netconnect.pm:1131 printer/printerdrake.pm:1672 #: standalone/drakconnect:683 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP 位址應該是 1.2.3.4 這類的格式" #: network/netconnect.pm:1135 standalone/drakconnect:687 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "網路遮罩應該是 255.255.224.0 這類的格式" #: network/netconnect.pm:1139 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "警告：IP 位址 %s 通常是保留下來的！" #: network/netconnect.pm:1144 standalone/drakTermServ:1731 #: standalone/drakTermServ:1732 standalone/drakTermServ:1733 #, c-format msgid "%s already in use\n" msgstr "%s 已經在使用中了\n" #: network/netconnect.pm:1177 #, c-format msgid "Choose an ndiswrapper driver" msgstr "選擇一個 ndiswrapper 驅動程式" #: network/netconnect.pm:1179 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:1179 #, c-format msgid "Install a new driver" msgstr "安裝一個新的驅動程式" #: network/netconnect.pm:1191 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1216 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "請輸入這張卡的無線網路參數：" #: network/netconnect.pm:1219 standalone/drakconnect:415 #, c-format msgid "Operating Mode" msgstr "運作模式" #: network/netconnect.pm:1220 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:1220 #, c-format msgid "Managed" msgstr "" #: network/netconnect.pm:1220 #, c-format msgid "Master" msgstr "" #: network/netconnect.pm:1220 #, c-format msgid "Repeater" msgstr "重複器" #: network/netconnect.pm:1220 #, c-format msgid "Secondary" msgstr "第二的" #: network/netconnect.pm:1220 #, c-format msgid "Auto" msgstr "自動" #: network/netconnect.pm:1222 standalone/drakconnect:416 #, c-format msgid "Network name (ESSID)" msgstr "網路名稱 (ESSID)" #: network/netconnect.pm:1223 standalone/drakconnect:417 #, c-format msgid "Network ID" msgstr "網路 ID" #: network/netconnect.pm:1224 standalone/drakconnect:418 #, c-format msgid "Operating frequency" msgstr "工作頻率" #: network/netconnect.pm:1225 standalone/drakconnect:419 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1226 standalone/drakconnect:420 #, c-format msgid "Bitrate (in b/s)" msgstr "連線速率 (b/s)" #: network/netconnect.pm:1227 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1231 standalone/drakconnect:431 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1232 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1239 standalone/drakconnect:432 #, c-format msgid "Fragmentation" msgstr "破碎片段" #: network/netconnect.pm:1240 standalone/drakconnect:433 #, c-format msgid "Iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1241 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1248 standalone/drakconnect:434 #, c-format msgid "Iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1249 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1257 standalone/drakconnect:435 #, c-format msgid "Iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1258 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1273 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1277 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1314 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "請輸入您的主機名稱.\n" "您的主機名稱應該是一個完全合格的主機全名,\n" "類似 ``mybox.mylab.myco.com'' 的格式.\n" "使用閘道器的話, 也請在這邊輸入閘道器的 IP 位址." #: network/netconnect.pm:1319 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1321 standalone/drakconnect:1032 #, c-format msgid "Host name (optional)" msgstr "主機名稱 (選擇性輸入)" #: network/netconnect.pm:1321 #, c-format msgid "Host name" msgstr "主機名稱" #: network/netconnect.pm:1323 #, c-format msgid "DNS server 1" msgstr "DNS 伺服器 1" #: network/netconnect.pm:1324 #, c-format msgid "DNS server 2" msgstr "DNS 伺服器 2" #: network/netconnect.pm:1325 #, c-format msgid "DNS server 3" msgstr "DNS 伺服器 3" #: network/netconnect.pm:1326 #, c-format msgid "Search domain" msgstr "搜尋網域" #: network/netconnect.pm:1327 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1328 #, c-format msgid "Gateway (e.g. %s)" msgstr "閘道器 (比方 %s)" #: network/netconnect.pm:1330 #, c-format msgid "Gateway device" msgstr "閘道器裝置" #: network/netconnect.pm:1339 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS 伺服器位址必須要用 1.2.3.4 的格式來輸入" #: network/netconnect.pm:1344 standalone/drakconnect:692 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Gateway 位址必須要用類似 1.2.3.4 的格式來輸入" #: network/netconnect.pm:1357 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1361 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf 主機名稱" #: network/netconnect.pm:1364 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1374 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "您已經選擇設定多個能夠連線到 Internet 的方式.\n" "請您選擇其中一個要使用的項目.\n" "\n" #: network/netconnect.pm:1376 #, c-format msgid "Internet connection" msgstr "Internet 連線" #: network/netconnect.pm:1385 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "設定完成, 您想要套用設定值?" #: network/netconnect.pm:1392 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "您要在開機時自動啟動該連線嗎?" #: network/netconnect.pm:1412 #, c-format msgid "Do you want to start the connection at boot?" msgstr "您要在開機時自動啟動該連線嗎?" #: network/netconnect.pm:1431 #, c-format msgid "Automatically at boot" msgstr "自動於開機時" #: network/netconnect.pm:1433 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1435 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1444 #, c-format msgid "How do you want to dial this connection?" msgstr "您想要如何撥接這個連線?" #: network/netconnect.pm:1458 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?" #: network/netconnect.pm:1465 network/netconnect.pm:1536 #, c-format msgid "Network Configuration" msgstr "網路設定" #: network/netconnect.pm:1466 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "重新啟動網路時發生了一個問題:\n" "\n" "%s" #: network/netconnect.pm:1475 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "現在您想要試著連線到 Internet 上面嗎?" #: network/netconnect.pm:1483 standalone/drakconnect:1064 #, c-format msgid "Testing your connection..." msgstr "正在測試您的連線..." #: network/netconnect.pm:1503 #, c-format msgid "The system is now connected to the Internet." msgstr "系統現在連上 Internet 了." #: network/netconnect.pm:1504 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "因為安全因素考量, 它現在將會被切斷連線." #: network/netconnect.pm:1505 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "系統目前看起來似乎並沒有連上 Internet.\n" "請嘗試重新設定您的連線." #: network/netconnect.pm:1523 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "在完成這個項目後, 我們建議您重新啟動您的 X 環境\n" "以避免因為您調整了主機名稱造成 X 的問題." #: network/netconnect.pm:1524 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "設定時發生問題.\n" "以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或" "許需要重新再進行設定." #: network/netconnect.pm:1537 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "因為您是透過網路安裝, 所以您的網路組態已經設定過了.\n" "您可以點選確定 Ok 保留您的設定組態, 或者是選取取消 cancel\n" "來重新設定網路 & 網際網路連線.\n" #: network/netconnect.pm:1575 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "發生了一個沒有預料到的錯誤：\n" "%s" #: network/network.pm:315 #, c-format msgid "Proxies configuration" msgstr "代理伺服器設定" #: network/network.pm:316 #, c-format msgid "HTTP proxy" msgstr "HTTP 代理伺服器" #: network/network.pm:317 #, c-format msgid "FTP proxy" msgstr "FTP 代理伺服器" #: network/network.pm:320 #, c-format msgid "Proxy should be http://..." msgstr "代理伺服器的設定格式必須為 http://..." #: network/network.pm:321 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL 應該是以 'ftp:' 或 'http:' 開頭" #: network/shorewall.pm:25 #, c-format msgid "Firewalling configuration detected!" msgstr "防火牆設定已經偵測到了!" #: network/shorewall.pm:26 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "警告! 偵測到現有已經存在的防火牆組態設定.\n" "您應該在安裝之後手動修正某些設定." #: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: network/tools.pm:190 #, c-format msgid "Insert floppy" msgstr "插入軟片" #: network/tools.pm:191 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "插入一張 FAT 格式化的軟片於磁碟 %s 跟著 %s 於 root 目錄下然後按下 %s" #: network/tools.pm:196 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "軟片存取錯誤, 無法掛載裝置 %s" #: partition_table.pm:397 #, c-format msgid "mount failed: " msgstr "掛載失敗:" #: partition_table.pm:502 #, c-format msgid "Extended partition not supported on this platform" msgstr "這個平台並不支援延伸分割區" #: partition_table.pm:520 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "您的硬碟分割表中有一個空洞, 我無法使用\n" "唯一的解決方法是將您的主分割區的位置搬移, 讓這些空洞與延伸分割區相鄰." #: partition_table.pm:611 #, c-format msgid "Restoring from file %s failed: %s" msgstr "試圖從檔案 %s 恢復時發生錯誤: %s" #: partition_table.pm:613 #, c-format msgid "Bad backup file" msgstr "壞掉的備份檔案" #: partition_table.pm:633 #, c-format msgid "Error writing to file %s" msgstr "寫入檔案 %s 時發生錯誤" #: partition_table/raw.pm:249 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "您的磁碟發生了一個嚴重的錯誤.\n" "資料完整性檢測已經失敗了.\n" "它意旨寫入任何東西到磁碟將會導致胡亂, 腐敗的資料." #: pkgs.pm:23 #, c-format msgid "must have" msgstr "必備的" #: pkgs.pm:24 #, c-format msgid "important" msgstr "重要的" #: pkgs.pm:25 #, c-format msgid "very nice" msgstr "極好的" #: pkgs.pm:26 #, c-format msgid "nice" msgstr "好的" #: pkgs.pm:27 #, c-format msgid "maybe" msgstr "或許" #: pkgs.pm:481 #, c-format msgid "Downloading file %s..." msgstr "正在下載檔案 %s..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(於 %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(位於這個機器上)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "於其他機器上被設定" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "位於 CUPS 伺服器 \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4761 #: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916 #: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137 #, c-format msgid " (Default)" msgstr " (預設開機)" #: printer/data.pm:56 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Print, Do not Queue" #: printer/data.pm:57 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:69 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:70 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:91 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:92 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:117 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - 通用 Unix 列印系統" #: printer/data.pm:147 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - 通用 Unix 列印系統 (遠端伺服器)" #: printer/data.pm:148 #, c-format msgid "Remote CUPS" msgstr "遠端 CUPS" #: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441 #: printer/detect.pm:478 #, c-format msgid "Unknown Model" msgstr "未知的型號" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "本地印表機" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "遠端印表機" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "遠端的 CUPS 伺服器印表機" #: printer/main.pm:30 printer/printerdrake.pm:1150 #: printer/printerdrake.pm:1695 #, c-format msgid "Printer on remote lpd server" msgstr "遠端的 lpd 伺服器印表機" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "網路印表機 (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT 伺服器印表機" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "Netware 伺服器印表機" #: printer/main.pm:34 printer/printerdrake.pm:1699 #, c-format msgid "Enter a printer device URI" msgstr "輸入印表機裝置的 URI" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "使用 Pipe 管線工作到一個指令" #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "建議使用" #: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671 #: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910 #: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174 #, c-format msgid "Unknown model" msgstr "未知的型號" #: printer/main.pm:354 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "於本機上被設定" #: printer/main.pm:360 printer/printerdrake.pm:1239 #, c-format msgid " on parallel port #%s" msgstr "於並列埠上 #%s" #: printer/main.pm:363 printer/printerdrake.pm:1242 #, c-format msgid ", USB printer #%s" msgstr "，USB 印表機 #%s" #: printer/main.pm:365 #, c-format msgid ", USB printer" msgstr "，USB 印表機" #: printer/main.pm:369 #, c-format msgid ", HP printer on a parallel port" msgstr "，位於並列埠的 HP 印表機" #: printer/main.pm:371 #, c-format msgid ", HP printer on USB" msgstr "，位於 USB 埠的 HP 印表機" #: printer/main.pm:373 #, c-format msgid ", HP printer on HP JetDirect" msgstr "，位於 HP JetDirect 的 HP 印表機" #: printer/main.pm:375 #, c-format msgid ", HP printer" msgstr "，HP 印表機" #: printer/main.pm:381 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "，位於並列埠 %s 的多功能裝置" #: printer/main.pm:384 #, c-format msgid ", multi-function device on a parallel port" msgstr "，位於並列埠的多功能裝置" #: printer/main.pm:386 #, c-format msgid ", multi-function device on USB" msgstr "，位於 USB 的多功能裝置" #: printer/main.pm:388 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "，為於 HP JetDirect 的多功能裝置" #: printer/main.pm:390 #, c-format msgid ", multi-function device" msgstr "，多功能裝置" #: printer/main.pm:394 #, c-format msgid ", printing to %s" msgstr "，列印至 %s" #: printer/main.pm:397 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " 位於 LPD 伺服器 \"%s\"，印表機 \"%s\"" #: printer/main.pm:400 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "，TCP/IP 主機 \"%s\"，連接埠 %s" #: printer/main.pm:405 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "位於 Windows 伺服器\"%s\"，分享名稱 \"%s\"" #: printer/main.pm:410 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "位於 Novell 伺服器 \"%s\"，印表機 \"%s\"" #: printer/main.pm:413 #, c-format msgid ", using command %s" msgstr "，使用指令 %s" #: printer/main.pm:428 #, c-format msgid "Parallel port #%s" msgstr "於並列埠 #%s" #: printer/main.pm:431 printer/printerdrake.pm:1260 #: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305 #, c-format msgid "USB printer #%s" msgstr "USB 印表機 #%s" #: printer/main.pm:433 #, c-format msgid "USB printer" msgstr "USB 印表機" #: printer/main.pm:437 #, c-format msgid "HP printer on a parallel port" msgstr "位於並列埠的 HP 印表機" #: printer/main.pm:439 #, c-format msgid "HP printer on USB" msgstr "位於 USB 埠的 HP 印表機" #: printer/main.pm:441 #, c-format msgid "HP printer on HP JetDirect" msgstr "位於 HP JetDirect 的 HP 印表機" #: printer/main.pm:443 #, c-format msgid "HP printer" msgstr "HP 印表機" #: printer/main.pm:449 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "多功能裝置位於並列埠 #%s" #: printer/main.pm:452 #, c-format msgid "Multi-function device on a parallel port" msgstr "多功能裝置位於一個並列埠" #: printer/main.pm:454 #, c-format msgid "Multi-function device on USB" msgstr "多功能裝置位於 USB" #: printer/main.pm:456 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "多功能裝置位於 HP JetDirect" #: printer/main.pm:458 #, c-format msgid "Multi-function device" msgstr "多功能裝置" #: printer/main.pm:462 #, c-format msgid "Prints into %s" msgstr "列印至 %s" #: printer/main.pm:465 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD 伺服器 \"%s\"，印表機 \"%s\"" #: printer/main.pm:468 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP 主機 \"%s\"，連接埠 %s" #: printer/main.pm:473 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "位於 Windows 伺服器 \"%s\"，分享名稱 \"%s\"" #: printer/main.pm:478 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "位於 Novell 伺服器 \"%s\"，印表機 \"%s\"" #: printer/main.pm:481 #, c-format msgid "Uses command %s" msgstr "使用指令 %s" #: printer/main.pm:483 #, c-format msgid "URI: %s" msgstr "URI：%s" #: printer/main.pm:631 printer/printerdrake.pm:856 #: printer/printerdrake.pm:2953 #, c-format msgid "Raw printer (No driver)" msgstr "Raw 印表機 (沒有驅動程式)" #: printer/main.pm:1181 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "本地端網路" #: printer/main.pm:1183 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "介面 \"%s\"" #: printer/main.pm:1185 #, c-format msgid "Network %s" msgstr "網路 %s" #: printer/main.pm:1187 #, c-format msgid "Host %s" msgstr "主機 %s" #: printer/main.pm:1216 #, c-format msgid "%s (Port %s)" msgstr "%s (連接埠 %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "HP LaserJet 1000 啟動電源後需要下載它的韌體檔。請由 HP 的網站下載給 Windows " "使用的驅動程式 (印表機光碟中的韌體檔無法工作) 並使用 'unzip' 工具解開 '.exe' " "的自動解壓檔，然後尋找一個名為 'sihp1000.img' 的韌體檔。複製這個檔案到 '/etc/" "printer' 目錄下。這裡它將會被自動上傳 script 找到，並在印表機連接上電腦並啟動" "電源後自動上傳。\n" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "CUPS 印表機設定" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "本機的列表機可以被其他的電腦使用" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "自動尋找遠端機器上可以使用的印表機" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "印表機分享於主機/網路：" #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "客製化設定" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "沒有遠端機器" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "附加的 CUPS 伺服器:" #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "日本字列印模式" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "自動化更正 CPUS 設定" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4397 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "開" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "關" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "本地端印表機分享" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "新增主機/網路" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "編輯選取的主機/網路" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "移除選取的主機/網路" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "主機/網路的IP 位址" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "主機/網路 IP 位址遺失。" #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "輸入的主機/網路 IP 是錯誤的。\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "正確的 IP 位址範例：\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "這個主機/網路已經存在於列表中，無法重複新增\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "存取遠端的 CUPS 伺服器印表機" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "在這裡新增您想要使用的 CUPS 伺服器。您只有在伺服器沒有向區域網路廣播它所擁有" "的印表機資訊時才需要作這件事。" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "新增伺服器" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "編輯選取的伺服器" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "移除選取的伺服器" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "輸入您想要使用的印表機主機的 IP 位址及通訊埠。" #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "假如沒有指定通訊埠，將使用預設值 631" #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "伺服器 IP 遺失！" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "輸入的 IP 位址不正確。\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:1924 #, c-format msgid "The port number should be an integer!" msgstr "通訊埠號應該是一個整數！" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "這個伺服器已經存在於列表中，無法重複新增\n" #: printer/printerdrake.pm:462 printer/printerdrake.pm:1951 #: standalone/drakups:251 standalone/harddrake2:51 #, c-format msgid "Port" msgstr "通訊埠" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, c-format msgid "On, Name or IP of remote server:" msgstr "開，遠端伺服器的名稱或 IP 位址：" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 #, c-format msgid "CUPS server name or IP address missing." msgstr "CUPS 伺服器的名稱或 IP 位址遺失。" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:680 printer/printerdrake.pm:746 #: printer/printerdrake.pm:773 printer/printerdrake.pm:832 #: printer/printerdrake.pm:874 printer/printerdrake.pm:884 #: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225 #: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305 #: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374 #: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458 #: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542 #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804 #: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948 #: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656 #: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771 #: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906 #: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079 #: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110 #: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300 #: printer/printerdrake.pm:4306 printer/printerdrake.pm:4326 #: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542 #: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571 #: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "PrinterDrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4008 #: printer/printerdrake.pm:4543 #, c-format msgid "Reading printer data..." msgstr "正在讀取印表機資料..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "正在重新啟動 CUPS..." #: printer/printerdrake.pm:614 printer/printerdrake.pm:634 #, c-format msgid "Select Printer Connection" msgstr "選擇印表機連線" #: printer/printerdrake.pm:615 #, c-format msgid "How is the printer connected?" msgstr "印表機是如何連線的?" #: printer/printerdrake.pm:617 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "位於遠端 CUPS 伺服器的印表機上並不需要在這裡設定；\n" "這些印表機將自動偵測到。" #: printer/printerdrake.pm:620 printer/printerdrake.pm:4786 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" "\n" "警告：本地端網路連線並未啟動，無法偵測遠端印表機也無法測試！" #: printer/printerdrake.pm:627 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "印表機自動偵測 (本地端，TCP/Socket，SMB 印表機，與裝置 URI )" #: printer/printerdrake.pm:629 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "修改網路印表機自動偵測的連線逾時時間" #: printer/printerdrake.pm:635 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "請在此輸入網路印表機自動偵測的連線逾時時間 (以秒為單位)。" #: printer/printerdrake.pm:637 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:641 #, c-format msgid "The timeout must be a positive integer number!" msgstr "連線逾時時間必須為整數！" #: printer/printerdrake.pm:680 #, c-format msgid "Checking your system..." msgstr "正在檢查您的系統..." #: printer/printerdrake.pm:697 #, c-format msgid "and one unknown printer" msgstr "與一台未知的印表機機" #: printer/printerdrake.pm:699 #, c-format msgid "and %d unknown printers" msgstr "與 %d 台未知的印表機" #: printer/printerdrake.pm:703 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "下列印表機\n" "\n" "%s%s直接連結到您的系統" #: printer/printerdrake.pm:705 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "下列印表機\n" "\n" "%s%s直接連結到您的系統" #: printer/printerdrake.pm:706 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "下列印表機\n" "\n" "%s%s直接連結到您的系統" #: printer/printerdrake.pm:710 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "目前有一台未知類型的印表機直接連結在您的系統上" #: printer/printerdrake.pm:711 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "目前有 %d 未知類型的印表機直接連結在您的系統上" #: printer/printerdrake.pm:714 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "目前沒有找到直接連結在您電腦上的印表機" #: printer/printerdrake.pm:717 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (請確認您全部的印表機連結並且打開電源了)。\n" #: printer/printerdrake.pm:730 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "您要啟用上面提及的印表機列印服務，或者是本地端網路的列印服務？\n" #: printer/printerdrake.pm:731 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "您要啟用本地端網路的列印服務？\n" #: printer/printerdrake.pm:733 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "您要啟用上面提及的印表機列印服務？\n" #: printer/printerdrake.pm:734 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "您確定要設定這台電腦上的列印服務嗎？\n" #: printer/printerdrake.pm:735 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "注意：根據印表機型號與列印系統，將要安裝總共 %d MB 的附加軟體。" #: printer/printerdrake.pm:774 #, c-format msgid "Searching for new printers..." msgstr "正在尋找新的印表機..." #: printer/printerdrake.pm:833 #, c-format msgid "Found printer on %s..." msgstr "在 %s 上找到印表機..." #: printer/printerdrake.pm:858 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:859 #, c-format msgid " on " msgstr "在" #: printer/printerdrake.pm:860 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:865 printer/printerdrake.pm:2960 #, c-format msgid "Printer model selection" msgstr "選擇印表機的型號" #: printer/printerdrake.pm:866 printer/printerdrake.pm:2961 #, c-format msgid "Which printer model do you have?" msgstr "您的印表機屬於那種型號？" #: printer/printerdrake.pm:867 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake 無法確定您的印表機 %s 的型號。請由列表中選取正確的型號。" #: printer/printerdrake.pm:870 printer/printerdrake.pm:2966 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "如果您的印表機並未列出，請選取一個相容 (見印表機說明書) 或者是相似的。" #: printer/printerdrake.pm:875 #, c-format msgid "Configuring printer on %s..." msgstr "正在設定印表機於 %s..." #: printer/printerdrake.pm:885 printer/printerdrake.pm:4563 #, c-format msgid "Configuring printer \"%s\"..." msgstr "正在設定印表機 \"%s\" 中..." #: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063 #: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191 #: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973 #, c-format msgid "Add a new printer" msgstr "新增一個印表機" #: printer/printerdrake.pm:1052 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "歡迎來到印表機設定精靈\n" "\n" "這個精靈允許您安裝本地端或遠端印表機以便被這台電腦及網路中的其他電腦使用。\n" "\n" "它將詢問您設定印表機所需的所有必要資訊並提供您所有可用的印表機驅動程式、驅動" "程式選項、與印表機連線型態。" #: printer/printerdrake.pm:1065 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "歡迎來到印表機設定精靈\n" "\n" "這個精靈將會幫助您安裝您的印表機 - 不論它是直接連結到這台電腦的印表機、網路印" "表機或是一個經由 Windows 所分享的印表機。\n" "\n" "請插入並開啟所有連接到這台電腦上的印表機來進行自動偵測。此外您的網路印表機與" "您的 Windows 電腦必須要連線並且開啟電源。\n" "\n" "請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時" "間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功" "能。\n" "\n" "當您準備好時，請點選「下一步」，或者如果您現在不想設定印表機，請點選「取" "消」。" #: printer/printerdrake.pm:1074 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "歡迎來到印表機設定精靈\n" "\n" "接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n" "若是您要設定的印表機是直接安裝在你機器上，請先確認您的線路有安插正確，並且電" "源已經開啟，以便於自動偵測您的印表機型號。\n" "\n" "當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。" #: printer/printerdrake.pm:1082 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "歡迎來到印表機設定精靈\n" "\n" "接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機以及遠端網路印" "表機。\n" "若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且" "電源已經開啟，以便於自動偵測您的印表機型號。若是您要使用的是網路印表機，請確" "定該印表機的電源也是處於開啟狀態並且已經正確的連線。\n" "\n" "請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時" "間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功" "能。\n" "\n" "當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。" #: printer/printerdrake.pm:1091 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "歡迎來到印表機設定精靈\n" "\n" "接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n" "若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且" "電源已經開啟，以便於自動偵測您的印表機型號。\n" "\n" "當您確認沒問題時，點選「下一步」，或者點選「取消」放棄設定。" #: printer/printerdrake.pm:1142 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "自動偵測本機印表機" #: printer/printerdrake.pm:1145 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "自動偵測區域網路印表機" #: printer/printerdrake.pm:1148 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "自動偵測位於 Microsoft Windows 電腦的印表機" #: printer/printerdrake.pm:1151 #, fuzzy, c-format msgid "No auto-detection" msgstr "自動偵測" #: printer/printerdrake.pm:1171 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "恭喜，您的印表機已經安裝並設定完成！\n" "\n" "您可以在您的應用程式中使用 \"列印\" 這個指令 (通常位於 \"檔案\" 這個選單下)。" "若是您事後需要新增、刪除、重新命名，或者修改預設選項 (例如紙張輸入方向、輸出" "品質...等)，請在 %s 控制中心中的 \"硬體\" 選擇 \"印表機\" 來設定。" #: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592 #: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806 #: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061 #: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079 #: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231 #: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363 #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465 #, c-format msgid "Could not install the %s packages!" msgstr "無法安裝 %s 套件！" #: printer/printerdrake.pm:1209 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "略過 Windows/SMB 伺服器自動偵測" #: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360 #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Printer auto-detection" msgstr "印表機自動偵測" #: printer/printerdrake.pm:1215 #, c-format msgid "Detecting devices..." msgstr "正在偵測裝置..." #: printer/printerdrake.pm:1245 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", 網路印表機 \"%s\"，連接埠 %s" #: printer/printerdrake.pm:1248 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", 網路印表機 \"%s\"，位於 SMB/Windows 伺服器 \"%s\"" #: printer/printerdrake.pm:1252 #, c-format msgid "Detected %s" msgstr "偵測到 %s" #: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284 #: printer/printerdrake.pm:1302 #, c-format msgid "Printer on parallel port #%s" msgstr "位於並列埠 %s 的印表機" #: printer/printerdrake.pm:1263 #, c-format msgid "Network printer \"%s\", port %s" msgstr "網路印表機 \"%s\"，連接埠 %s" #: printer/printerdrake.pm:1266 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "網路印表機 \"%s\"，位於 SMB/Windows 伺服器 \"%s\"" #: printer/printerdrake.pm:1347 #, c-format msgid "Local Printer" msgstr "本機印表機" #: printer/printerdrake.pm:1348 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "無法找到本地印表機！請手動指定印表機的所在裝置名稱。\n" "(並列埠：/dev/lp0, /dev/lp1, ... 相當於 LPT1:, LPT2:..., \n" "第一台 USB 印表機是：/dev/usb/lp0, 第二台：/dev/usb/lp1)。" #: printer/printerdrake.pm:1352 #, c-format msgid "You must enter a device or file name!" msgstr "您需要選擇或輸入該印表機名稱或裝置項目！" #: printer/printerdrake.pm:1361 #, c-format msgid "No printer found!" msgstr "找不到印表機！" #: printer/printerdrake.pm:1369 #, c-format msgid "Local Printers" msgstr "本機印表機" #: printer/printerdrake.pm:1370 #, c-format msgid "Available printers" msgstr "可用的印表機" #: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383 #, c-format msgid "The following printer was auto-detected. " msgstr "已偵測到下列的印表機。" #: printer/printerdrake.pm:1376 #, fuzzy, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "下面所列出的是使用自動偵測所找到的印表機。若是找到的項目\n" "並不是你所預期的, 那請手動輸入裝置名稱/檔案名稱" #: printer/printerdrake.pm:1377 #, fuzzy, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "請選擇您印表機的連接埠, 或者是輸入該裝置的名稱" #: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "這裡有份所有自動偵測到的印表機列表。" #: printer/printerdrake.pm:1380 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "請選擇您要設定的印表機，或者在輸入欄位中輸入該裝置或檔案的名稱" #: printer/printerdrake.pm:1381 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "請選擇您印表機的連接埠, 或者是輸入該裝置的名稱" #: printer/printerdrake.pm:1385 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自" "訂的印表機設定，請打開 「手動設定」。" #: printer/printerdrake.pm:1386 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1389 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "請選擇您要設定的印表機。印表機的相關設定將會自動完成。若您的印表機沒有正確的" "被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。" #: printer/printerdrake.pm:1390 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "請選取印表工作應該送達的印表機。" #: printer/printerdrake.pm:1392 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "請選擇您印表機的連接埠，或在輸入欄位中輸入該裝置或檔案的名稱" #: printer/printerdrake.pm:1393 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "請選取印表機所連接的連接埠。" #: printer/printerdrake.pm:1395 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (並列埠：/dev/lp0, /dev/lp1, ...... 相當於 LPT1:, LPT2:....\n" "第一台 USB 印表機是：/dev/usb/lp0, 第二台：/dev/usb/lp1)。" #: printer/printerdrake.pm:1399 #, c-format msgid "You must choose/enter a printer/device!" msgstr "您必須選擇/輸入一印表機/裝置！" #: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502 #: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732 #: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970 #: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072 #: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092 #, c-format msgid "Aborting" msgstr "放棄" #: printer/printerdrake.pm:1475 #, c-format msgid "Remote lpd Printer Options" msgstr "遠端 lpd 印表機選項" #: printer/printerdrake.pm:1476 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "如要使用遠端的 lpd 印表機, 您必須要指定用來提供\n" "印表服務的遠端列印伺服主機名稱, 以及分享出來\n" "印表機名稱。" #: printer/printerdrake.pm:1477 #, c-format msgid "Remote host name" msgstr "遠端主機名稱" #: printer/printerdrake.pm:1478 #, c-format msgid "Remote printer name" msgstr "遠端印表機名稱" #: printer/printerdrake.pm:1481 #, c-format msgid "Remote host name missing!" msgstr "沒有指定遠端主機名稱 !" #: printer/printerdrake.pm:1485 #, c-format msgid "Remote printer name missing!" msgstr "沒有指定印表機名稱 !" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 standalone/drakTermServ:445 #: standalone/drakTermServ:740 standalone/drakTermServ:757 #: standalone/drakTermServ:1469 standalone/drakTermServ:1477 #: standalone/drakTermServ:1489 standalone/drakbackup:512 #: standalone/drakbackup:618 standalone/drakbackup:653 #: standalone/drakbackup:773 standalone/drakroam:385 standalone/harddrake2:261 #, c-format msgid "Information" msgstr "資訊" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 #, c-format msgid "Detected model: %s %s" msgstr "偵測到的型號：%s %s" #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Scanning network..." msgstr "掃描網路中..." #: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", 印表機 \"%s\", 位於主機 \"%s\"" #: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "印表機 \"%s\", 位於 \"%s\"" #: printer/printerdrake.pm:1655 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "網路芳鄰 (SMB, Windows 9x/NT) 印表機選項" #: printer/printerdrake.pm:1656 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "如要使用網路芳鄰印表機, 您必須要提供主機網芳名稱 \n" "(注意! 這個名稱與 TCP/IP 的主機名稱可能並不相同), \n" "有時還必須指定列印伺服器的 IP 位址、分享出來的印表\n" "機名稱、適當的使用者帳號與密碼, 以及工作群組的資訊。" #: printer/printerdrake.pm:1657 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "如果偵測出來的印表機是您所需要的, 你可以選擇該項目, 並輸入存取的使用者名稱、" "密碼, 必要時並輸入群組名稱。" #: printer/printerdrake.pm:1659 #, c-format msgid "SMB server host" msgstr "SMB 主機名稱”" #: printer/printerdrake.pm:1660 #, c-format msgid "SMB server IP" msgstr "SMB 伺服器 IP" #: printer/printerdrake.pm:1661 #, c-format msgid "Share name" msgstr "印表機名稱" #: printer/printerdrake.pm:1664 #, c-format msgid "Workgroup" msgstr "工作群組" #: printer/printerdrake.pm:1666 #, c-format msgid "Auto-detected" msgstr "自動偵測" #: printer/printerdrake.pm:1676 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "伺服器的主機名稱或者是 IP 必須指定" #: printer/printerdrake.pm:1680 #, c-format msgid "Samba share name missing!" msgstr "Samba 分享的名稱沒指定 !" #: printer/printerdrake.pm:1686 #, c-format msgid "SECURITY WARNING!" msgstr "安全性警告" #: printer/printerdrake.pm:1687 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "您目前打算使用一組帳號與密碼以便於能夠存取 Windows 主機來進行列印的工作。不過" "您需要注意的是, 因為系統是呼叫 Samba 的程式軟體連線到 Windows 主機, 所以執行" "程式時會在命令列加上您所設定輸入的帳號密碼。這可能會有一些安全性問題, 比方有" "使用者可以執行 ps aux指令來查看您帳號密碼內容。\n" "\n" "所以建議您可以使用下面方式：\n" "\n" "在 Windows 主機設置不需要密碼的帳號, 比方「GUEST」, 然後只有開放該帳號具備列" "印的功能。請注意, 千萬不要直接把 administrator 帳號設定為不需要密碼, 然後直接" "使用該 administrator 登入, 因為這是很危險的。\n" "\n" "或者是您可以設定您的 Windows 機器能夠讓印表機與 LPD 協定配合, 如此您就可以在 " "Printerdrake 程式內使用「%s」連線類型進行設定與列印。\n" "\n" #: printer/printerdrake.pm:1697 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "請設定好您的 Windows 主機的服務, 確認印表機能夠在 IPP 通訊協定上正常運作, 以" "便於在 PrinterDrake 程式內使用 \"%s\" 連線能夠存取到。\n" #: printer/printerdrake.pm:1700 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "將您的印表機安裝在 Linux 伺服器上且讓您的 Windows 機器以客戶端連線到 Linux 伺" "服器\n" "\n" "您確定要繼續進行設定這台印表機下去嗎?" #: printer/printerdrake.pm:1779 #, c-format msgid "NetWare Printer Options" msgstr "NetWare 印表機選項" #: printer/printerdrake.pm:1780 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "如要使用 NetWare 印表機, 您必須要提供 NetWare\n" "列印伺服器的主機名稱 (注意! 這個名稱與 TCP/IP \n" "的主機名稱可能並不相同), 還要有分享出來的列印\n" "佇列名稱, 以及適當的使用者帳號與密碼。" #: printer/printerdrake.pm:1781 #, c-format msgid "Printer Server" msgstr "列印伺服器名稱" #: printer/printerdrake.pm:1782 #, c-format msgid "Print Queue Name" msgstr "列印佇列名稱" #: printer/printerdrake.pm:1787 #, c-format msgid "NCP server name missing!" msgstr "NCP 伺服器名稱沒指定!" #: printer/printerdrake.pm:1791 #, c-format msgid "NCP queue name missing!" msgstr "NCP 列印佇列名稱名稱沒指定" #: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888 #, c-format msgid ", host \"%s\", port %s" msgstr ", 主機 \"%s\", 連接埠 %s" #: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891 #, c-format msgid "Host \"%s\", port %s" msgstr "主機 \"%s\", 連接埠 %s" #: printer/printerdrake.pm:1913 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket 印表機選項" #: printer/printerdrake.pm:1915 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "請由清單內選擇您預期的印表機項目, 並且輸入主機名稱、\n" "IP等資訊, 必要時請輸入該連結埠號 (預設使用 port 9100)。" #: printer/printerdrake.pm:1916 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "要透過TCP/socket這類型的印表機進行列印, 您需要\n" "提供該印表機的主機名稱, 同時也可能需要選擇性輸入\n" "所在Port的位址。在大部分的HP-JetDirect印表機\n" "伺服主機所使用的Port多半為9100, 其餘類型的印表機\n" "就不一定為這個數值。建議您先閱讀印表機所提供的\n" "手冊, 尋找出你目前使用這款印表機的相關硬體資訊。" #: printer/printerdrake.pm:1920 #, c-format msgid "Printer host name or IP missing!" msgstr "沒指定印表機主機名稱或是 IP！" #: printer/printerdrake.pm:1949 #, c-format msgid "Printer host name or IP" msgstr "印表機主機名稱或是 IP" #: printer/printerdrake.pm:2012 #, c-format msgid "Refreshing Device URI list..." msgstr "正在更新設備 URL 列表..." #: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017 #, c-format msgid "Printer Device URI" msgstr "印表機的 URI" #: printer/printerdrake.pm:2016 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "您可以直接使用 URI 的方式存取該印表機。URI 必須完整輸入\n" "CUPS伺服器所在位址, 或者是用 Foomatic 規格方式輸入。\n" "請注意, 並不是所有的 URI 類型都能夠被所有的 spooler 支援。" #: printer/printerdrake.pm:2042 #, c-format msgid "A valid URI must be entered!" msgstr "必須輸入完整的 URI 位址！" #: printer/printerdrake.pm:2147 #, fuzzy, c-format msgid "Pipe into command" msgstr "使用 Pipe 管線方式組成列印工作" #: printer/printerdrake.pm:2148 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2149 #, c-format msgid "Command line" msgstr "指令列" #: printer/printerdrake.pm:2153 #, fuzzy, c-format msgid "A command line must be entered!" msgstr "必須輸入完整的 URI 位址！" #: printer/printerdrake.pm:2192 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2194 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2195 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2196 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2198 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232 #: printer/printerdrake.pm:2258 #, c-format msgid "HPLIP" msgstr "" #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202 #: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364 #: printer/printerdrake.pm:2375 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2207 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358 #, c-format msgid "Installing %s package..." msgstr "正在安裝套件 %s..." #: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2248 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" #: printer/printerdrake.pm:2250 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375 #, c-format msgid "Checking device and configuring %s..." msgstr "正在檢查與設定 %s 中..." #: printer/printerdrake.pm:2277 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "您要使用那個通訊協定?" #: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419 #, c-format msgid "Installing SANE packages..." msgstr "正在安裝套件 SANE..." #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2334 #, c-format msgid "Using and Maintaining your %s" msgstr "使用與維護您的 %s" #: printer/printerdrake.pm:2459 #, c-format msgid "Installing mtools packages..." msgstr "正在安裝套件 mtools..." #: printer/printerdrake.pm:2467 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2483 #, c-format msgid "Scanning on your HP multi-function device" msgstr "正在掃描您的 HP 多功能裝置" #: printer/printerdrake.pm:2492 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2509 #, c-format msgid "Configuring device..." msgstr "設定裝置中..." #: printer/printerdrake.pm:2543 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805 #: printer/printerdrake.pm:2949 #, c-format msgid "Reading printer database..." msgstr "正在讀取印表機資料 ..." #: printer/printerdrake.pm:2763 #, c-format msgid "Enter Printer Name and Comments" msgstr "輸入印表機名稱及註解" #: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "印表機的名稱應該只包含英文字母、數字與底線這類字元" #: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "這台 \"%s\" 印表機已經存在了, \n" "您確定要覆蓋這台印表機的組態設定嗎？" #: printer/printerdrake.pm:2780 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:2789 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "每一個印表機都需要指定一個名稱 (比方像是 printer)。\n" "至於描述與位置欄位可以不必填入，因為這些欄位是註解。" #: printer/printerdrake.pm:2790 #, c-format msgid "Name of printer" msgstr "印表機名稱" #: printer/printerdrake.pm:2791 standalone/drakconnect:603 #: standalone/harddrake2:38 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "描述" #: printer/printerdrake.pm:2792 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "位置" #: printer/printerdrake.pm:2810 #, c-format msgid "Preparing printer database..." msgstr "正在準備印表機資料" #: printer/printerdrake.pm:2927 #, c-format msgid "Your printer model" msgstr "您的印表機型號" #: printer/printerdrake.pm:2928 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "PrinterDrake 程式已經比較了現有資料庫內以及自動偵測的結果, 以便於能夠找出最適" "用的印表機類型。這個結果可能有問題, 尤其您的印表機的項目並沒有登記在目前已知" "的資料庫內時, 所以請檢視這個結果是否正確, 必要時請選擇「手動選擇型號」項目挑" "選出正確的型號項目。\n" "\n" "目前 PrinterDrake 程式所找到的印表機項目如下：\n" "\n" "%s" #: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936 #, c-format msgid "The model is correct" msgstr "該型號正確" #: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935 #: printer/printerdrake.pm:2938 #, c-format msgid "Select model manually" msgstr "手動選擇型號" #: printer/printerdrake.pm:2962 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "請檢視 PrinterDrake 程式所自動偵測到的印表機型號是否正確。\n" "您也可以尋找檢視下面的印表機清單。" #: printer/printerdrake.pm:2981 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3013 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:3014 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:3015 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:3016 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:3017 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:3018 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3020 #, fuzzy, c-format msgid "Install PPD file from" msgstr "安裝" #: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "磁碟片" #: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "其他地方" #: printer/printerdrake.pm:3039 #, c-format msgid "Select PPD file" msgstr "選擇 PPD 檔案" #: printer/printerdrake.pm:3043 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:3049 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:3060 #, c-format msgid "Installing PPD file..." msgstr "正在安裝 PPD 檔案..." #: printer/printerdrake.pm:3178 #, c-format msgid "OKI winprinter configuration" msgstr "OKI Windows 印表機設定" #: printer/printerdrake.pm:3179 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "您目前是設定使用 OKI 雷射印表機項目。這類的印表機\n" "使用一種很特殊的傳輸溝通協定, 因此這類印表機一定要\n" "安裝在電腦第一個連接埠位置上才能夠正常工作。\n" "所以現在請您先確定您目前的印表機已經正確地安置在\n" "第一個連接埠上, 以便於才能夠正在列印測試頁內容。\n" "否則列印功能將會無法正常工作。" #: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark 噴墨印表機設定" #: printer/printerdrake.pm:3205 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n" "的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n" "印表機已經正確連結到您本地端電腦上, 設定該印表機的\n" "連結位置。" #: printer/printerdrake.pm:3235 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "若是希望能夠使用這台 Lexmark 噴墨印表機進行列印的話\n" "您需要由 Lexmark 網站 (http://www.lexmark.com) 首頁上\n" "尋找相關連結, 下載這台印表機的驅動程式。比方當您連上\n" "Lexmark 網站首頁後, 請點選 \"Drivers\" 按鈕, 選擇您\n" "目前使用該款印表機型號, 並確認是選取使用 \"Linux\"的\n" "版本。一般來說, 您下載回來的檔案, 可能是 RPM 套件檔案\n" "或者是幾個 shell script (執行該檔案將會啟動安裝程式)。\n" "一般來說, 您並不需要透過圖行化的前端介面來進行相關的\n" "的設定。然後使用 \"lexmarkmaintain\" 程式項目來列印噴頭\n" "校正的工作設定。" #: printer/printerdrake.pm:3245 #, c-format msgid "Lexmark X125 configuration" msgstr "Lexmark X125 多功能事務機設定" #: printer/printerdrake.pm:3246 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n" "的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n" "印表機已經正確連結到您本地端電腦上, 設定該印表機的\n" "連結位置。" #: printer/printerdrake.pm:3268 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Samsung ML/QL-85G 設定" #: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" "Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n" "的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n" "印表機已經正確連結到您本地端電腦上, 設定該印表機的\n" "連結位置。" #: printer/printerdrake.pm:3295 #, fuzzy, c-format msgid "Canon LBP-460/660 configuration" msgstr "手動組態設定" #: printer/printerdrake.pm:3314 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3464 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "預設印表機設定\n" "\n" "您需要確定紙張的大小與墨水的種類設定都正確無誤。\n" "請注意一下, 當使用高品質列印時所花費的時間會越久。" #: printer/printerdrake.pm:3589 #, c-format msgid "Printer default settings" msgstr "印表機型號選擇" #: printer/printerdrake.pm:3596 #, c-format msgid "Option %s must be an integer number!" msgstr "%s 參數需要為整數!" #: printer/printerdrake.pm:3600 #, c-format msgid "Option %s must be a number!" msgstr "%s 選項一定要為數字!" #: printer/printerdrake.pm:3604 #, c-format msgid "Option %s out of range!" msgstr "%s 參數超出允許範圍！" #: printer/printerdrake.pm:3656 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "您要使用這台印表機 (\"%s\") 為預設印表機嗎？" #: printer/printerdrake.pm:3672 #, c-format msgid "Test pages" msgstr "列印測試頁" #: printer/printerdrake.pm:3673 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "您選取你要列印的測試頁。\n" "注意: 圖形測試頁會花費比較久的時間來列印, \n" "若是該印表機硬體可用記憶體很少的話, 列印時間\n" "能夠會需要花費更久時間。\n" "一般情況來說, 選擇標準的測試頁就很足夠了。" #: printer/printerdrake.pm:3677 #, c-format msgid "No test pages" msgstr "不列印測試頁" #: printer/printerdrake.pm:3678 #, c-format msgid "Print" msgstr "列印" #: printer/printerdrake.pm:3703 #, c-format msgid "Standard test page" msgstr "標準列印測試頁" #: printer/printerdrake.pm:3706 #, c-format msgid "Alternative test page (Letter)" msgstr "Letter 紙張列印測試頁" #: printer/printerdrake.pm:3709 #, c-format msgid "Alternative test page (A4)" msgstr "A4 紙張列印測試頁" #: printer/printerdrake.pm:3711 #, c-format msgid "Photo test page" msgstr "圖形列印測試頁" #: printer/printerdrake.pm:3715 #, c-format msgid "Do not print any test page" msgstr "不要列印任何測試頁" #: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907 #, c-format msgid "Printing test page(s)..." msgstr "正在列印測試頁..." #: printer/printerdrake.pm:3743 #, c-format msgid "Skipping photo test page." msgstr "略過照片列印測試頁" #: printer/printerdrake.pm:3760 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "測試頁已經被送到列印伺服程式了.\n" "於印表機開始之前, 它可能需要一點時間.\n" "目前的列印狀態:\n" "%s\n" "\n" #: printer/printerdrake.pm:3764 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "測試頁已經被送到列印伺服程式了, 接著可能需要花\n" "一點時間, 印表機才會把結果印出來。\n" #: printer/printerdrake.pm:3774 #, c-format msgid "Did it work properly?" msgstr "列印正常嗎？" #: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175 #, c-format msgid "Raw printer" msgstr "Raw 印表機" #: printer/printerdrake.pm:3836 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \n" "\"%s <檔案名稱>\"\n" "或者是使用圖型介面程式:\n" "\"xpp <檔案名稱>\"\n" "或者是\n" "\"kprinter <檔案名稱>\"\n" "即可。您可以透過圖型介面程式簡單的選擇印表機項目, \n" "包含修改相關的列印選項。\n" #: printer/printerdrake.pm:3838 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "這個指令功能, 其實您也可以在許多應用程式列印對話方塊的 \"列印命令\" 使用" "它。\n" "但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由相關應用程式提供。\n" #: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858 #: printer/printerdrake.pm:3868 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "「%s」指令, 能夠讓您修改某個設定列印工作項目的參數設定。\n" "簡單一點的方式就是在命令列加上您要填入的設定值, 比方「%s <檔案>」。 " #: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "要獲得目前這台印表機可用的相關參數選項, 或者是查看下面清單\n" "所顯示的項目, 請點選點選『列印選項清單』按鈕。%s%s%s\n" "\n" #: printer/printerdrake.pm:3848 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "下面包含了目前印表機支援的選項清單:\n" "\n" #: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "要在命令列環境(終端機視窗)列印檔案的話, 您可以執行這個指令 \"%s <檔案>\".\n" #: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865 #: printer/printerdrake.pm:3875 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "這個指令功能, 其實您也可以在許多應用程式列印對話方塊的\n" "『列印命令』使用它。\n" "但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由\n" "相關應用程式提供。\n" #: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "要獲得目前這台印表機可用的相關參數選項, 請點選 \"Print option list 印表機選項" "表\"按鈕." #: printer/printerdrake.pm:3873 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \"%s <檔案>\" 或者是 " "\"%s <檔案>\"。\n" #: printer/printerdrake.pm:3877 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "您也可以使用圖形介面 \"xpdq\" 來設定選項處理列印工作.\n" "如果您目前是使用 KDE 桌面環境的話, 你有一個 \"panic button 恐慌按鈕\" 圖示在" "桌面上, 標示為 \"STOP Printer! 停止印表機!\" 以停止全部的列印工作, 當你按下它" "時. 這對如卡紙來說十分有用.\n" #: printer/printerdrake.pm:3881 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "\"%s\" 與 \"%s\" 指令, 能夠讓您修改某個設定列印工作項目\n" "的參數設定。簡單一點的方式就是在命令列加上您要填入的設定值, \n" "比方 \"%s <檔案>\"。\n" #: printer/printerdrake.pm:3891 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: printer/printerdrake.pm:3892 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: printer/printerdrake.pm:3894 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: printer/printerdrake.pm:3896 #, fuzzy, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "使用「%s」印表機進行列印" #: printer/printerdrake.pm:3897 #, c-format msgid "Printing on the printer \"%s\"" msgstr "使用「%s」印表機進行列印" #: printer/printerdrake.pm:3903 #, c-format msgid "Print option list" msgstr "列印選項清單" #: printer/printerdrake.pm:3925 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3928 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:3929 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share " "your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:3933 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:3934 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:3936 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3937 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" "請注意這將花費許多時間，由數位相機或 USB 讀卡機讀取圖片通常會較快。\n" "\n" #: printer/printerdrake.pm:3940 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3941 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3942 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3943 #, c-format msgid " - Print head alignment\n" msgstr "" #: printer/printerdrake.pm:3944 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Xorg 設定" #: printer/printerdrake.pm:3959 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:3985 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055 #: printer/printerdrake.pm:4090 #, c-format msgid "Transfer printer configuration" msgstr "印表機傳送設定" #: printer/printerdrake.pm:4029 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "若是您已經設定過 %s spooler 印表機項目的話, 您可以很簡單\n" "將組態設定內容套用給 %s 項目。能夠套用的組態項目, 包含像是\n" "印表機的名稱、描述資訊、位置、連線類型、預設參數等等項目, \n" "不過不包含傳送要列印的工作項目功能。\n" "另外並不是所有的列印工作都能夠被傳輸過來, 因為下面原因：\n" #: printer/printerdrake.pm:4032 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS 目前並不支援位於Novell主機上的印表機, 包含不使用free-formed\n" "命令傳送列印資料的印表機。\n" #: printer/printerdrake.pm:4034 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ 僅支援本地端印表機, 或者是遠端 LPD 的印表機, 以及\n" "TCP/Socket 印表機類型。\n" #: printer/printerdrake.pm:4036 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "PD 與 LPRng 不支援 IPP 類型的印表機。\n" #: printer/printerdrake.pm:4038 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "除此之外, queues 無法透過該程式建立, 或者是 \"foomatic-configure\"\n" "無法進行傳輸。" #: printer/printerdrake.pm:4039 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "透過廠商所提供的 PPD 檔案內容或者是原始性的 CUPS 驅動程式\n" "設定的印表機無法被進行轉換動作." #: printer/printerdrake.pm:4040 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "請點選標記您要傳送的印表機項目, 然後點選 \"傳送\" 即可。" #: printer/printerdrake.pm:4043 #, c-format msgid "Do not transfer printers" msgstr "不傳送印表機" #: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060 #, c-format msgid "Transfer" msgstr "傳送" #: printer/printerdrake.pm:4056 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "在 %s 已經存在了一個名稱為 %s 的印表機名稱。\n" "請點選『傳送』覆蓋內容。\n" "您也可以另外輸入一個名稱, 或者是略過這台印表機。" #: printer/printerdrake.pm:4077 #, c-format msgid "New printer name" msgstr "新印表機名稱" #: printer/printerdrake.pm:4080 #, c-format msgid "Transferring %s..." msgstr "正在傳送 %s ..." #: printer/printerdrake.pm:4091 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4101 #, c-format msgid "Refreshing printer data..." msgstr "正在更新印表機資料 ..." #: printer/printerdrake.pm:4111 #, c-format msgid "Starting network..." msgstr "啟動網路中 ..." #: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159 #: printer/printerdrake.pm:4161 #, c-format msgid "Configure the network now" msgstr "立即設定網路" #: printer/printerdrake.pm:4156 #, c-format msgid "Network functionality not configured" msgstr "目前網路功能尚未設定" #: printer/printerdrake.pm:4157 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "您目前要開始設定遠端印表機列印的項目。要進行此項目設定的前提, 您的系統需要具" "備網路功能以便於進行存取動作, 但是目前網路尚未設定。如果您打算略過網路設定項" "目繼續進行下面的步驟的話, 關於設定使用遠端印表機功能的項目將無法設定。您打算" "要怎麼作呢？" #: printer/printerdrake.pm:4160 #, c-format msgid "Go on without configuring the network" msgstr "略過網路設定項目繼續進行下面的步驟" #: printer/printerdrake.pm:4195 #, fuzzy, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "在系統整個安裝過程中, 系統的網路服務並未啟動。建議您可以在\n" "整個安裝完成, 重新開機進入系統後, 透過 Mandrake 控制台程式\n" "選擇『網路』『連線』項目進行設定。此外, 後續像是印表機\n" "的設定, 您也可以透過 Mandrake 控制台程式, 在『硬體』內的\n" "『印表機』項目來進行設定" #: printer/printerdrake.pm:4196 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "網路服務的存取功能並未開啟, 而且也無法啟動這個服務項目。\n" "請檢查一下您的設定, 甚至包含您的硬體是否設定正確無誤。\n" "當檢查完畢後, 再重新設定遠端列印的相關項目。" #: printer/printerdrake.pm:4206 #, c-format msgid "Restarting printing system..." msgstr "正在重新啟動列印系統服務 ..." #: printer/printerdrake.pm:4237 #, c-format msgid "high" msgstr "高" #: printer/printerdrake.pm:4237 #, c-format msgid "paranoid" msgstr "瘋狂狀態" #: printer/printerdrake.pm:4239 #, c-format msgid "Installing a printing system in the %s security level" msgstr "在 %s 安全等級環境下正在安裝列印服務系統項目" #: printer/printerdrake.pm:4240 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "您目前正準備在「%s」安全等級的環境安裝來安裝「%s』\n" "這個列印系統項目。\n" "\n" "這個列印服務項目, 相關程式將會在幕後運作, 以便於能夠\n" "提供相關印表功能。此外, 列印相關的服務, 也能夠經由網路\n" "的方式進行存取, 所以某個層面來說這可能有被攻擊的危險。\n" "因此, 在這個安全等級環境下, 將只有少部份的服務程式預設\n" "會在開機時啟動。\n" "\n" "您確定要開始設定這台機器上的列印項目設定嗎？" #: printer/printerdrake.pm:4276 #, c-format msgid "Starting the printing system at boot time" msgstr "於開機時啟動列印服務系統" #: printer/printerdrake.pm:4277 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "列印服務系統 (%s) 將不會在系統開機時載入。\n" "\n" "若是您系統設定是選擇比較高的安全等級項目的話, \n" "預設也是不會啟動列印服務的項目的。\n" "\n" "您希望這邊能夠設定在開機時能夠預設啟動列印\n" "服務的項目嗎？" #: printer/printerdrake.pm:4300 #, c-format msgid "Checking installed software..." msgstr "正在檢查已經安裝的軟體" #: printer/printerdrake.pm:4306 #, c-format msgid "Removing %s..." msgstr "正在移除 %s" #: printer/printerdrake.pm:4310 #, fuzzy, c-format msgid "Could not remove the %s printing system!" msgstr "變更列印系統" #: printer/printerdrake.pm:4326 #, c-format msgid "Installing %s..." msgstr "正在安裝套件 %s..." #: printer/printerdrake.pm:4330 #, fuzzy, c-format msgid "Could not install the %s printing system!" msgstr "變更列印系統" #: printer/printerdrake.pm:4398 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4400 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4414 #, fuzzy, c-format msgid "Name or IP of remote server:" msgstr "遠端的 lpd 伺服器印表機" #: printer/printerdrake.pm:4434 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "預設印表機" #: printer/printerdrake.pm:4454 #, fuzzy, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "遠端的 CUPS 伺服器印表機" #: printer/printerdrake.pm:4455 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "CUPS 列印系統可以下列兩種方式使用：" #: printer/printerdrake.pm:4457 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "1. CUPS 列印系統可以在本地端執行。" #: printer/printerdrake.pm:4458 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4459 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4461 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4462 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4463 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4465 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "您的 CUPS 系統應該如何設定？" #: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484 #: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4483 #, fuzzy, c-format msgid "Local CUPS printing system" msgstr "變更列印系統" #: printer/printerdrake.pm:4522 #, c-format msgid "Select Printer Spooler" msgstr "選擇印表列印系統" #: printer/printerdrake.pm:4523 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "您打算用那一套列印系統？" #: printer/printerdrake.pm:4572 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "正在設定「%s」印表機中 ..." #: printer/printerdrake.pm:4587 #, c-format msgid "Installing Foomatic..." msgstr "正在安裝 Foomatic 套件..." #: printer/printerdrake.pm:4593 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "無法安裝套件 %s，%s 啟動失敗！" #: printer/printerdrake.pm:4785 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "下列的印表機都已經設定過了, 您可以點選其中一個項目, \n" "可以查看內容資訊或者是修改內容設定, 包含設定為預設印表機。" #: printer/printerdrake.pm:4815 #, fuzzy, c-format msgid "Display all available remote CUPS printers" msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)" #: printer/printerdrake.pm:4816 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)" #: printer/printerdrake.pm:4827 #, c-format msgid "CUPS configuration" msgstr "CUPS 設定組態" #: printer/printerdrake.pm:4839 #, c-format msgid "Change the printing system" msgstr "變更列印系統" #: printer/printerdrake.pm:4848 #, c-format msgid "Normal Mode" msgstr "一般模式" #: printer/printerdrake.pm:4849 #, c-format msgid "Expert Mode" msgstr "專家模式" #: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176 #: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264 #, c-format msgid "Printer options" msgstr "印表機選項" #: printer/printerdrake.pm:5154 #, c-format msgid "Modify printer configuration" msgstr "修改印表機設定" #: printer/printerdrake.pm:5156 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "印表機 %s%s\n" "您要修改這個印表機的那個項目？" #: printer/printerdrake.pm:5161 #, fuzzy, c-format msgid "This printer is disabled" msgstr "這個分割區無法重新調整大小" #: printer/printerdrake.pm:5163 #, c-format msgid "Do it!" msgstr "做吧 !" #: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223 #, c-format msgid "Printer connection type" msgstr "印表機連線方式" #: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229 #, c-format msgid "Printer name, description, location" msgstr "印表機名稱, 描述, 位置" #: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248 #, c-format msgid "Printer manufacturer, model, driver" msgstr "印表機廠商,型號,驅動程式" #: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249 #, c-format msgid "Printer manufacturer, model" msgstr "印表機廠商,型號" #: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259 #, c-format msgid "Set this printer as the default" msgstr "使用這台印表機為預設印表機" #: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265 #: printer/printerdrake.pm:5267 #, fuzzy, c-format msgid "Enable Printer" msgstr "開啟服務" #: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270 #: printer/printerdrake.pm:5272 #, fuzzy, c-format msgid "Disable Printer" msgstr "關閉服務" #: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275 #, c-format msgid "Print test pages" msgstr "列印測試頁..." #: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "瞭解如何使用這台印表機" #: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279 #, c-format msgid "Remove printer" msgstr "刪除印表機" #: printer/printerdrake.pm:5237 #, c-format msgid "Removing old printer \"%s\"..." msgstr "正在刪除舊的印表機 \"%s\" ..." #: printer/printerdrake.pm:5268 #, fuzzy, c-format msgid "Printer \"%s\" is now enabled." msgstr "印表機 \"%s\", 位於 \"%s\"" #: printer/printerdrake.pm:5273 #, fuzzy, c-format msgid "Printer \"%s\" is now disabled." msgstr "Internet 連線共享目前關閉了。" #: printer/printerdrake.pm:5310 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "您確定要刪除印表機 \"%s\" 嗎？" #: printer/printerdrake.pm:5314 #, c-format msgid "Removing printer \"%s\"..." msgstr "正在移除印表機 \"%s\"..." #: printer/printerdrake.pm:5338 #, c-format msgid "Default printer" msgstr "預設印表機" #: printer/printerdrake.pm:5339 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。" #: raid.pm:42 #, fuzzy, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "無法在 _已格式_ 化的磁碟陣列 md%d 中加入分割區" #: raid.pm:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "分割區數目不足以用來設定成為階層 %d 的磁碟陣列\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "無法建立目錄 /usr/share/sane/firmware！" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "無法建立連結 /usr/share/sane/%s！" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, fuzzy, c-format msgid "Scannerdrake" msgstr "選取您的掃描器" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "無法安裝分享掃描器所需的套件。" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "您的掃描器將只供擁有管理者權限的使用者使用。" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: security/help.pm:29 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "(位於這個機器上)" #: security/help.pm:31 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "(位於這個機器上)" #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "安全警示：" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: security/help.pm:108 #, fuzzy, c-format msgid "Set the root umask." msgstr "沒有密碼" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, fuzzy, c-format msgid "Set the user umask." msgstr "使用者" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, fuzzy, c-format msgid "Allow remote root login" msgstr "(位於這個機器上)" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "一般 modem 連線方式" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "設定系統服務" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "每日安全檢查" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, fuzzy, c-format msgid "No password aging for" msgstr "沒有密碼" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, fuzzy, c-format msgid "Password history length" msgstr "輸入的密碼太簡單了" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, fuzzy, c-format msgid "Root umask" msgstr "沒有密碼" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, fuzzy, c-format msgid "Shell timeout" msgstr "核心啟動時間逾時時間" #: security/l10n.pm:44 #, fuzzy, c-format msgid "User umask" msgstr "使用者" #: security/l10n.pm:45 #, fuzzy, c-format msgid "Check open ports" msgstr "於 port %s 偵測到" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "劣" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "差" #: security/level.pm:13 #, c-format msgid "High" msgstr "高" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "較高" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "嚴密" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "把安全機制設定在這個等級時必須要非常謹慎, \n" "它會讓您的系統用起來更加簡易方便, 可是卻極易\n" "受到破壞: 這個設定不應該被用在有連線到Internet\n" "的主機, 因為所有的存取動作都沒有用密碼加以\n" "限制。" #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "已啟動密碼認證功能, 但仍然不建議將此系統運作於網路上網路環境。" #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "標準的系統安全性設定, 建議用在有對外連線的主機上使用。" #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "包含了相關存取限制, 以及每日定期系統稽核檢查動作。" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "高度的安全性相關的檢查與設定, 適合提供在架設對外服務的伺服器使用。" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "與上一個模式相同, 不過整個系統幾乎都是封閉的。系統整個安全設定機制都是在最嚴" "密的狀態。" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec 基本參數選項" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "請選擇您希望的安全等級" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "安全等級" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "啟用「libsafe」防護功能" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "能夠偵測防禦緩衝區溢位與格式化字串這類攻擊的程式庫套件。" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "安全性管理者 (login 或是 email)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "啟動 ALSA (Advanced Linux Sound Architecture) 音效系統" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "提供週期性的命令排程程式" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd 被用來監督電池狀態, 以及呼叫 syslog 紀錄相關狀態.\n" "它也被用來自動呼叫關機程式進行關機動作, 當電池電源不夠時." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "atd 服務程式, 能夠讓您在在命令列指定某個時間執行某個程式。" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron 是個標準 unix 系統程式, 能夠提供使用者定期執行特定程式。\n" "vixie 版本的 cron 增加了許多功能, \n" "在安全性與設定方面能夠更彈性好用。" #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM 能夠讓系統在文字模式下驅動顯示出滑鼠游標, 能夠在 Midnight Commander\n" "這類程式中所使用。另外還能夠支援在文字模式下螢幕文字的剪貼複製功能。" #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake 程式會進行硬體偵測動作, 以便於設定新加入或者是有變更過\n" "的週邊裝置。" #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "Apache 是一個提供 Web 服務的程式, 提供架設 Web Server 讓使用者瀏覽。" #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "internet superserver daemon (一般稱呼為 inetd), 它代為像是 telnet、ftp,\n" "rsh、rlogin 等等這類服務的監聽, 然後有連線請求時, 在實際呼叫提供服務的\n" "程式進行後續交談溝通的動作。關閉這個項目, 仰賴於這個服務代為監聽啟動的\n" "項目將會無法使用" #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "啟動 Linux Kernel 2.2 系列的防火牆機制, 用來保護您的機器不會遭受\n" "外來的網路攻擊。" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "這個服務項目將會載入\n" "/etc/sysconfig/keyboard\n" "檔案的鍵盤對應設定組態。\n" "您可以事後使用 kdbconfig 程式來設定。\n" "一般來說, 目前大部分機器並不需要這個項目。" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "自動重新產生 kernel header 於 /boot 給\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "系統開機時能夠自動偵測週邊裝置的狀態並且設定。" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "Linuxconf 程式會在開機時偵測一些項目, 調整維護系統一些組態設定。" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd 服務程式是 lpr 程式運作上不可缺的程式。若是要架設列印服務伺服器\n" "的話, lpd 是很常見的選擇。" #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "Linux Virtual Server, 用來架設一個高效能與高效率的 LVS 伺服器。" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) 適用來提供 Domain Name Server (DNS) 服務的程式, \n" "用來解析主機名稱與 IP 對應的關係。" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "掛載與卸下所有網路檔案系統, 比方像是 網路檔案系統(NFS), SMB, \n" "NCP (NetWare) 這類。" #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "在系統開機時, 選擇啟動網路功能, 或者是關閉不啟動該服務。" #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n" "這個服務項目會依照系統的 /etc/exports 檔案設定來啟動 NFS 分享功能。" #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n" "這個服務提供 NFS 檔案分享時的鎖定機制。" #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "自動開關 numlock key 鎖在開機時於 console\n" "與 Xorg." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "支援 OKI 4w 以及 WindowsPrinter 印表機。" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA 支援, 一般是用來讓筆記型電腦的網路卡、Modem 驅動所設計。\n" "一般來說, 要額外設定好 PCMCIA 後才會真正啟動 PCMCIA 服務, 因此\n" "就算是系統不需要這個功能, 預先啟動他也不會有任何影響。" #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper 程式管理了 RPC 連線, 一般用於 NFS 與 NIS 通訊協定內。\n" "若是您系統要使用到 RPC 相關服務, 您就必須啟動它。" #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "Postfix 是一個郵件傳送代理程式, 用來投遞信件提供 SMTP 服務。" #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "儲存與回存高品質系統亂數產生器" #: services.pm:76 #, fuzzy, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "給 block 這類區塊裝置指派 raw 裝置 (就像是硬碟的分割區), \n" "一般是給 oracle 這類特殊程式使用。" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "routed 服務程式允許透過 RIP 通訊協定來更新路由表的資訊。\n" "一般來說, RIP 是給小型網路用途使用。" #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat 通訊協定, 能夠讓位於網路上的使用者接收到網路上任何一台\n" "主機的運作效能資訊。" #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers 通訊協定, 能夠讓位於網路上的使用者得知那些使用者登入在那些\n" "機器上" #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "rwho 通訊協定, 能夠讓遠端的使用者獲得該機器上所有登入在主機上的\n" "使用找 (類似於 finger)。" #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "在您的系統上啟動音效服務系統" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "syslog 服務程式能夠讓系統許多服務程式用紀錄檔案來回應系統\n" "所發生一些事情。建議您一定要啟動 syslog 服務程式" #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "載入 usb 裝置所需要的驅動程式" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "啟動 X Font Server (這是為了 Xorg 執行一定要的)." #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "選擇希望在下一次開機時啟動的服務程式項目" #: services.pm:127 #, c-format msgid "Printing" msgstr "列印" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "檔案分享" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "遠端管理" #: services.pm:146 #, c-format msgid "Database Server" msgstr "資料庫軟體" #: services.pm:209 #, c-format msgid "running" msgstr "執行中" #: services.pm:209 #, c-format msgid "stopped" msgstr "未啟動" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "服務程式" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "抱歉 ! 這個服務項目並沒有\n" "額外的相關資訊。" #: services.pm:224 ugtk2.pm:1019 #, c-format msgid "Info" msgstr "資訊" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "要求時啟動" #: services.pm:227 #, c-format msgid "On boot" msgstr "開機自動載入" #: services.pm:244 standalone/drakroam:181 #, c-format msgid "Start" msgstr "啟動" #: services.pm:244 standalone/drakroam:182 #, c-format msgid "Stop" msgstr "停止" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "Mandrakelinux 是什麼？" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandrakelinux!" msgstr "歡迎來到 Mandrakelinux!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandrakelinux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" #: share/advertising/01.pl:19 #, c-format msgid "" "Mandrakelinux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" #: share/advertising/02.pl:13 #, fuzzy, c-format msgid "Open Source" msgstr "伺服器" #: share/advertising/02.pl:15 #, fuzzy, c-format msgid "Welcome to the world of open source!" msgstr "歡迎來到開放源碼的世界。" #: share/advertising/02.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandrakesoft's " "team of developers and the worldwide community of Mandrakelinux " "contributors." msgstr "" #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the " "Mandrakelinux tools are licensed under the General Public License." msgstr "" #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandrakelinux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandrakelinux world." msgstr "" #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrakelinux.com or directly www.mandrakelinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" #: share/advertising/05.pl:15 #, c-format msgid "Download Version" msgstr "" #: share/advertising/05.pl:17 #, c-format msgid "" "You are now installing Mandrakelinux Download. This is the free " "version that Mandrakesoft wants to keep available to everyone." msgstr "" #: share/advertising/05.pl:19 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" #: share/advertising/05.pl:20 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" #: share/advertising/05.pl:21 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" #: share/advertising/05.pl:23 #, c-format msgid "" "You will not have access to the services included in the other " "Mandrakesoft products either." msgstr "" #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandrakelinux Discovery." msgstr "" #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack." msgstr "" #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandrakesoft's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack+." msgstr "" #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" #: share/advertising/09.pl:13 #, fuzzy, c-format msgid "Mandrakesoft Products" msgstr "Mandrakelinux 控制中心" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandrakesoft has developed a wide range of Mandrakelinux " "products." msgstr "" #: share/advertising/09.pl:17 #, c-format msgid "The Mandrakelinux products are:" msgstr "" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "" #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "" #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandrakelinux for x86-64, The Mandrakelinux solution for making " "the most of your 64-bit processor." msgstr "" #: share/advertising/10.pl:15 #, c-format msgid "Mandrakesoft Products (Nomad Products)" msgstr "" #: share/advertising/10.pl:17 #, c-format msgid "" "Mandrakesoft has developed two products that allow you to use Mandrakelinux " "on any computer and without any need to actually install it:" msgstr "" #: share/advertising/10.pl:18 #, c-format msgid "" "\t* Move, a Mandrakelinux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" #: share/advertising/10.pl:19 #, c-format msgid "" "\t* GlobeTrotter, a Mandrakelinux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" #: share/advertising/11.pl:13 #, c-format msgid "Mandrakesoft Products (Professional Solutions)" msgstr "" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandrakesoft products designed to meet the professional " "needs:" msgstr "" #: share/advertising/11.pl:16 #, c-format msgid "\t* Corporate Desktop, The Mandrakelinux Desktop for Businesses." msgstr "" #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandrakelinux Server Solution." msgstr "" #: share/advertising/11.pl:18 #, c-format msgid "\t* Multi-Network Firewall, The Mandrakelinux Security Solution." msgstr "" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, fuzzy, c-format msgid "Choose your Favorite Desktop Environment" msgstr "選擇您檔案系統所使用的加密金鑰" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/14.pl:15 #, fuzzy, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org Math" #: share/advertising/14.pl:17 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "" #: share/advertising/14.pl:19 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" #: share/advertising/14.pl:21 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" #: share/advertising/15.pl:13 #, fuzzy, c-format msgid "Kontact" msgstr "Mandrakeclub" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "漫遊瀏覽網際網路" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "" #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "" #: share/advertising/16.pl:18 #, fuzzy, c-format msgid "\t* Transfer files with KBear." msgstr "以 FTP 傳輸檔案" #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "" #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "" #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "" #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "開發環境" #: share/advertising/19.pl:15 share/advertising/22.pl:17 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" #: share/advertising/20.pl:13 #, fuzzy, c-format msgid "Development Editors" msgstr "程式開發平台" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "" #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" #: share/advertising/21.pl:15 #, fuzzy, c-format msgid "Development Languages" msgstr "程式開發平台" #: share/advertising/21.pl:17 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" #: share/advertising/21.pl:18 #, c-format msgid "\t* The famous C language." msgstr "" #: share/advertising/21.pl:19 #, c-format msgid "\t* Object oriented languages:" msgstr "" #: share/advertising/21.pl:20 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Java™" msgstr "\t\t* Java™" #: share/advertising/21.pl:22 #, fuzzy, c-format msgid "\t* Scripting languages:" msgstr "列印管理程式" #: share/advertising/21.pl:23 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:24 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:25 share/advertising/28.pl:24 #, c-format msgid "\t* And many more." msgstr "" #: share/advertising/22.pl:15 #, fuzzy, c-format msgid "Development Tools" msgstr "程式開發平台" #: share/advertising/22.pl:19 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" #: share/advertising/23.pl:13 #, fuzzy, c-format msgid "Groupware Server" msgstr "伺服器" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "" #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "" #: share/advertising/24.pl:15 #, c-format msgid "Servers" msgstr "伺服器" #: share/advertising/24.pl:17 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/24.pl:18 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" #: share/advertising/24.pl:19 #, fuzzy, c-format msgid "\t* Apache: The most widely used web server." msgstr "Apache WWW 伺服器" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" #: share/advertising/24.pl:21 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" #: share/advertising/24.pl:22 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" #: share/advertising/24.pl:23 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" #: share/advertising/25.pl:13 #, c-format msgid "Mandrakelinux Control Center" msgstr "Mandrakelinux 控制中心" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandrakelinux Control Center is an essential collection of " "Mandrakelinux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandrakesoft sells added value products and services to keep improving " "Mandrakelinux. If you want to support the open source philosophy " "and the development of Mandrakelinux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, fuzzy, c-format msgid "Online Store" msgstr "Mandrakelinux 控制中心" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandrakesoft products and services, you can visit our " "e-commerce platform." msgstr "" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandrakesoft.com!" msgstr "" #: share/advertising/28.pl:15 #, c-format msgid "Mandrakeclub" msgstr "Mandrakeclub" #: share/advertising/28.pl:17 #, c-format msgid "" "Mandrakeclub is the perfect companion to your Mandrakelinux " "product.." msgstr "" #: share/advertising/28.pl:19 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandrakeclub, such as:" msgstr "" #: share/advertising/28.pl:20 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandrakesoft.com." msgstr "" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" #: share/advertising/28.pl:22 #, c-format msgid "\t* Participation in Mandrakelinux user forums." msgstr "" #: share/advertising/28.pl:23 #, c-format msgid "" "\t* Early and privileged access, before public release, to " "Mandrakelinux ISO images." msgstr "" #: share/advertising/29.pl:13 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline 線上服務" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandrakeonline is a new premium service that Mandrakesoft is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandrakeonline provides a wide range of valuable services for easily " "updating your Mandrakelinux systems:" msgstr "" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandrakelinux systems with one account." msgstr "" #: share/advertising/30.pl:13 #, c-format msgid "Mandrakeexpert" msgstr "Mandrakeexpert" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandrakesoft's technical experts on " "our technical support platform www.mandrakeexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandrakelinux experts, you will save " "a lot of time." msgstr "" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandrakelinux, you have the possibility to " "purchase support incidents at store.mandrakesoft.com." msgstr "" #: share/compssUsers.pl:25 #, c-format msgid "Office Workstation" msgstr "辦公軟體平台" #: share/compssUsers.pl:27 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "辦公軟體： 文書處理軟體 (OpenOffice.org Writer、Kword), 試算表 (OpenOffice." "org Calc、Kspread), pdf 閱讀程式等等" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "辦公軟體： 文書處理軟體 (kword、abiword), 試算表 (kspread、gnumeric), pdf 閱" "讀程式等等" #: share/compssUsers.pl:33 #, c-format msgid "Game station" msgstr "遊戲平台" #: share/compssUsers.pl:34 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "娛樂的一些程式： 紙牌、益智、動作、策略 等" #: share/compssUsers.pl:37 #, c-format msgid "Multimedia station" msgstr "多媒體平台" #: share/compssUsers.pl:38 #, c-format msgid "Sound and video playing/editing programs" msgstr "音效以及影像撥放編輯程式" #: share/compssUsers.pl:43 #, c-format msgid "Internet station" msgstr "Internet 平台" #: share/compssUsers.pl:44 #, fuzzy, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "包含讀信、寫信以及閱讀網路論壇的工具 (pine、mutt、tin ..) 與及 web 瀏覽工具" #: share/compssUsers.pl:49 #, c-format msgid "Network Computer (client)" msgstr "用戶端網路環境" #: share/compssUsers.pl:50 #, c-format msgid "Clients for different protocols including ssh" msgstr "包含 ssh 等其他不同通訊協定的用戶端程式" #: share/compssUsers.pl:54 #, c-format msgid "Configuration" msgstr "組態設定" #: share/compssUsers.pl:55 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "讓您方便設定您系統的工具" #: share/compssUsers.pl:59 #, c-format msgid "Console Tools" msgstr "Console 工具" #: share/compssUsers.pl:60 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "編輯器, shell, 檔案工具, 終端機" #: share/compssUsers.pl:65 share/compssUsers.pl:165 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "C/C++ 發展環境, 包含編譯器、程式庫與及一些引入檔案" #: share/compssUsers.pl:69 share/compssUsers.pl:169 #, c-format msgid "Documentation" msgstr "文件檔案" #: share/compssUsers.pl:70 share/compssUsers.pl:170 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Linux 系統與一些免費軟體的書籍、HOWTO 文件" #: share/compssUsers.pl:74 share/compssUsers.pl:173 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:75 share/compssUsers.pl:174 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "LSB 的支援, 包含第三類協力廠商軟體支援" #: share/compssUsers.pl:85 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:88 #, fuzzy, c-format msgid "Groupware" msgstr "群組" #: share/compssUsers.pl:89 #, c-format msgid "Kolab Server" msgstr "Kolab 伺服器" #: share/compssUsers.pl:92 share/compssUsers.pl:133 #, c-format msgid "Firewall/Router" msgstr "防火牆/路由器" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Internet gateway" msgstr "Internet 閘道器" #: share/compssUsers.pl:96 #, fuzzy, c-format msgid "Mail/News" msgstr "/檔案 (F)/新增 (_N)" #: share/compssUsers.pl:97 #, fuzzy, c-format msgid "Postfix mail server, Inn news server" msgstr "Postfix 郵件伺服器" #: share/compssUsers.pl:100 #, fuzzy, c-format msgid "Directory Server" msgstr "使用光碟片回存" #: share/compssUsers.pl:104 #, c-format msgid "FTP Server" msgstr "FTP 伺服器" #: share/compssUsers.pl:105 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:108 #, c-format msgid "DNS/NIS" msgstr "" #: share/compssUsers.pl:109 #, fuzzy, c-format msgid "Domain Name and Network Information Server" msgstr "網域名稱伺服器" #: share/compssUsers.pl:112 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "列印伺服器名稱" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "NFS Server, Samba server" msgstr "Samba 伺服器" #: share/compssUsers.pl:116 share/compssUsers.pl:129 #, c-format msgid "Database" msgstr "資料庫軟體" #: share/compssUsers.pl:117 #, fuzzy, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL、MySQL 資料庫" #: share/compssUsers.pl:121 #, c-format msgid "Web/FTP" msgstr "Web/FTP" #: share/compssUsers.pl:122 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache、ProFTPD" #: share/compssUsers.pl:125 #, c-format msgid "Mail" msgstr "電郵" #: share/compssUsers.pl:126 #, fuzzy, c-format msgid "Postfix mail server" msgstr "Postfix 郵件伺服器" #: share/compssUsers.pl:130 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL、MySQL 資料庫" #: share/compssUsers.pl:137 #, c-format msgid "Network Computer server" msgstr "網路伺服器" #: share/compssUsers.pl:138 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS server、SMB server、Proxy server、Ssh server" #: share/compssUsers.pl:146 #, c-format msgid "KDE Workstation" msgstr "KDE 環境" #: share/compssUsers.pl:147 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "KDE 圖形桌面介面環境, 包含許多好用的圖型介面工具程式" #: share/compssUsers.pl:151 #, c-format msgid "GNOME Workstation" msgstr "Gnome 環境" #: share/compssUsers.pl:152 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "包含友善的應用程式、桌面軟體的圖型化使用環境" #: share/compssUsers.pl:155 #, c-format msgid "Other Graphical Desktops" msgstr "其他圖型桌面軟體" #: share/compssUsers.pl:156 #, c-format msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 等等管理程式" #: share/compssUsers.pl:179 #, fuzzy, c-format msgid "Utilities" msgstr "Philippines" #: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "NIS 伺服主機" #: share/compssUsers.pl:186 #, c-format msgid "Webmin" msgstr "Webmin" #: share/compssUsers.pl:187 #, c-format msgid "Webmin Remote Configuration Server" msgstr "Webmin 遠端設定伺服器" #: share/compssUsers.pl:191 #, c-format msgid "Network Utilities/Monitoring" msgstr "網路工具/監控" #: share/compssUsers.pl:192 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:196 #, c-format msgid "Mandrakesoft Wizards" msgstr "Mandrakelinux 精靈" #: share/compssUsers.pl:197 #, c-format msgid "Wizards to configure server" msgstr "用來設定伺服器的精靈" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrakelinux tools\n" " --incident - program should be one of mandrakelinux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandrakelinux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[鍵盤]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: standalone/XFdrake:61 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "您需要重新開機以便於讓異動的設定生效" #: standalone/XFdrake:92 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X" #: standalone/XFdrake:96 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:74 #, c-format msgid "Useless without Terminal Server" msgstr "" #: standalone/drakTermServ:106 standalone/drakTermServ:112 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:123 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:129 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:211 standalone/drakTermServ:214 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "Mandrake Terminal Server 設定" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "開啟服務" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "關閉服務" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "啟動服務" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "停止服務" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "網路開機 Floppy/ISO" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "網路開機映像檔" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "新增/刪除使用者" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "新增/刪除用戶端" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "圖像" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "首次巫師" #: standalone/drakTermServ:325 standalone/drakTermServ:326 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:332 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:377 #, c-format msgid "Cancel Wizard" msgstr "取消精靈" #: standalone/drakTermServ:392 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:420 #, fuzzy, c-format msgid "Use thin clients." msgstr "新增/刪除用戶端" #: standalone/drakTermServ:422 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:444 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:445 standalone/drakTermServ:740 #: standalone/drakTermServ:757 #, c-format msgid "This will take a few minutes." msgstr "這個過程將會需要花費一些時間。" #: standalone/drakTermServ:449 standalone/drakTermServ:468 #, fuzzy, c-format msgid "Done!" msgstr "完成" #: standalone/drakTermServ:454 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:474 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:509 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "Mandrake Terminal Server 設定" #: standalone/drakTermServ:510 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:516 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:534 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:554 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:566 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:570 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:575 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:584 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:605 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" #: standalone/drakTermServ:640 #, c-format msgid "Boot Floppy" msgstr "開機片" #: standalone/drakTermServ:642 #, c-format msgid "Boot ISO" msgstr "開機映像檔案" #: standalone/drakTermServ:644 #, fuzzy, c-format msgid "PXE Image" msgstr "核心" #: standalone/drakTermServ:705 #, fuzzy, c-format msgid "Default kernel version" msgstr "核心版本" #: standalone/drakTermServ:708 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:738 #, c-format msgid "Build Whole Kernel -->" msgstr "建立整個核心 -->" #: standalone/drakTermServ:746 #, c-format msgid "No kernel selected!" msgstr "未選取核心!" #: standalone/drakTermServ:749 #, c-format msgid "Build Single NIC -->" msgstr "建立單一網路卡 -->" #: standalone/drakTermServ:753 #, c-format msgid "No NIC selected!" msgstr "未選擇網路卡!" #: standalone/drakTermServ:756 #, c-format msgid "Build All Kernels -->" msgstr "建立所有核心 -->" #: standalone/drakTermServ:767 #, c-format msgid "<-- Delete" msgstr "<-- 刪除" #: standalone/drakTermServ:772 #, fuzzy, c-format msgid "No image selected!" msgstr "未選擇網路卡!" #: standalone/drakTermServ:775 #, c-format msgid "Delete All NBIs" msgstr "刪除所有 NBI" #: standalone/drakTermServ:901 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:906 #, c-format msgid "Add User -->" msgstr "新增使用者 -->" #: standalone/drakTermServ:912 #, c-format msgid "<-- Del User" msgstr "<-- 刪除使用者" #: standalone/drakTermServ:948 #, fuzzy, c-format msgid "type: %s" msgstr "格式： " #: standalone/drakTermServ:952 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:982 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "自動重新設定" #: standalone/drakTermServ:991 #, c-format msgid "No net boot images created!" msgstr "並未建立網路開機映像檔" #: standalone/drakTermServ:1010 #, fuzzy, c-format msgid "Thin Client" msgstr "DHCP 用戶端" #: standalone/drakTermServ:1014 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "新增/刪除用戶端" #: standalone/drakTermServ:1015 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1016 #, c-format msgid "Add Client -->" msgstr "新增用戶端 -->" #: standalone/drakTermServ:1030 #, fuzzy, c-format msgid "type: fat" msgstr "格式： " #: standalone/drakTermServ:1031 #, fuzzy, c-format msgid "type: thin" msgstr "格式： " #: standalone/drakTermServ:1038 #, fuzzy, c-format msgid "local config: false" msgstr "本機密碼檔" #: standalone/drakTermServ:1039 #, fuzzy, c-format msgid "local config: true" msgstr "重新設定" #: standalone/drakTermServ:1047 #, c-format msgid "<-- Edit Client" msgstr "<-- 刪除用戶端" #: standalone/drakTermServ:1073 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1080 #, fuzzy, c-format msgid "Delete Client" msgstr "<-- 刪除用戶端" #: standalone/drakTermServ:1089 #, c-format msgid "dhcpd Config..." msgstr "dhcpd 設定..." #: standalone/drakTermServ:1104 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1149 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1165 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1197 #, c-format msgid "Subnet:" msgstr "子網路:" #: standalone/drakTermServ:1204 #, c-format msgid "Netmask:" msgstr "網路遮罩" #: standalone/drakTermServ:1211 #, c-format msgid "Routers:" msgstr "" #: standalone/drakTermServ:1218 #, c-format msgid "Subnet Mask:" msgstr "子網路遮罩：" #: standalone/drakTermServ:1225 #, c-format msgid "Broadcast Address:" msgstr "" #: standalone/drakTermServ:1232 #, fuzzy, c-format msgid "Domain Name:" msgstr "網域名稱" #: standalone/drakTermServ:1240 #, fuzzy, c-format msgid "Name Servers:" msgstr "Samba 伺服器" #: standalone/drakTermServ:1251 #, c-format msgid "IP Range Start:" msgstr "" #: standalone/drakTermServ:1252 #, c-format msgid "IP Range End:" msgstr "" #: standalone/drakTermServ:1294 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1296 #, c-format msgid "Write Config" msgstr "寫入設定" #: standalone/drakTermServ:1312 #, c-format msgid "dhcpd Server Configuration" msgstr "dhcpd 伺服器設定" #: standalone/drakTermServ:1313 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1316 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: standalone/drakTermServ:1463 #, c-format msgid "Please insert floppy disk:" msgstr "請插入一張軟片:" #: standalone/drakTermServ:1467 #, c-format msgid "Could not access the floppy!" msgstr "無法存取到軟碟" #: standalone/drakTermServ:1469 #, c-format msgid "Floppy can be removed now" msgstr "請移開軟碟內的軟片" #: standalone/drakTermServ:1472 #, c-format msgid "No floppy drive available!" msgstr "沒有可用的軟碟機" #: standalone/drakTermServ:1477 #, fuzzy, c-format msgid "PXE image is %s/%s" msgstr "網路開機的映像檔案是 %s" #: standalone/drakTermServ:1479 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "寫入檔案 %s 時發生錯誤" #: standalone/drakTermServ:1489 #, c-format msgid "Etherboot ISO image is %s" msgstr "網路開機的映像檔案是 %s" #: standalone/drakTermServ:1491 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "製作時發生錯誤, 您確認你有安裝 mkisofs 程式" #: standalone/drakTermServ:1512 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "需要建立 /etc/dhcpd.conf 檔案！" #: standalone/drakTermServ:1672 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1685 #, fuzzy, c-format msgid "%s is not a user..\n" msgstr "%s 沒有正常回應" #: standalone/drakTermServ:1686 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1688 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1690 #, c-format msgid "%s added to Terminal Server\n" msgstr "" #: standalone/drakTermServ:1707 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr "偵測到 %s" #: standalone/drakTermServ:1709 standalone/drakTermServ:1782 #, fuzzy, c-format msgid "%s not found...\n" msgstr "%s 沒有正常回應" #: standalone/drakTermServ:1810 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: standalone/drakTermServ:1950 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "錯誤！" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "我找不到這個重要的檔案 %s 。" #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "自動安裝設定程式" #: standalone/drakautoinst:42 #, fuzzy, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "目前準備設定自動安裝軟片。這個功能有點危險, 使用上要很慎重。\n" "\n" "這個功能, 您將能夠很自動的在所要安裝的電腦上自動進行安裝的\n" "動作, 有些步驟則能夠停下來讓使用者自己手動進行一些操作。\n" "\n" "為了最安全考量, 所有分割區劃分以及格式化動作將會自動進行。\n" "\n" "您希望繼續嗎？" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "重播" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "自動化步驟設定" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "請選擇每一個安裝的步驟, 這些將會是您所操作的安裝過程" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "正在製作自動安裝軟片" #: standalone/drakautoinst:90 #, fuzzy, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "請在 %s 中插入一片空白軟片" #: standalone/drakautoinst:91 #, fuzzy, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "正在製作自動安裝軟片" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "歡迎!\n" "\n" "自動安裝內可用的參數項目都在左邊的區段內" #: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 #: standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "恭喜!!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "已經成功建立自動安裝軟片。\n" "您可以使用這張軟片進行自動安裝的程序" #: standalone/drakautoinst:289 #, c-format msgid "Auto Install" msgstr "自動安裝" #: standalone/drakautoinst:358 #, c-format msgid "Add an item" msgstr "新增項目" #: standalone/drakautoinst:365 #, c-format msgid "Remove the last item" msgstr "移除之前項目" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "hd" msgstr "Chad" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "tape" msgstr "磁帶" #: standalone/drakbackup:152 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:153 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:326 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:330 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:377 #, fuzzy, c-format msgid "Interval cron not available as non-root" msgstr "Cron 使用非 root 身份執行時無法使用" #: standalone/drakbackup:462 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:466 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:475 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:477 #, fuzzy, c-format msgid "Old user list:\n" msgstr "" "\n" "- 使用者檔案:\n" #: standalone/drakbackup:479 #, fuzzy, c-format msgid "New user list:\n" msgstr "" "\n" "- 使用者檔案:\n" #: standalone/drakbackup:524 #, fuzzy, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackup 報表清單 \n" "\n" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " DrakBackup Daemon 報表清單\n" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup 資料備份報表細目\n" "\n" "\n" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, c-format msgid "Total progress" msgstr "全部進度" #: standalone/drakbackup:609 #, fuzzy, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s 已經存在了, 您要刪除該項目嗎？\n" "\n" "警告：若是您已經完成該工作進度, 也許您可以刪除該主機上\n" "認證憑證檔案。" #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "產生憑證檔案, 請稍後...。" #: standalone/drakbackup:625 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "錯誤, 無法執行 %s。" #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "%s 無密碼回應 (位於連接埠 %s)" #: standalone/drakbackup:643 #, c-format msgid "Bad password on %s" msgstr "%s - 錯誤的密碼" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "由 %s 傳輸到 %s 發生錯誤, 權限拒絕" #: standalone/drakbackup:645 #, c-format msgid "Can not find %s on %s" msgstr "無法找到 %s (位於 %s)" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "%s 沒有正常回應" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "傳輸成功\n" "您也許想要確認您能夠登入伺服器以:\n" "\n" "ssh -i %s %s@%s\n" "\n" "這應該不需要輸入任何密碼." #: standalone/drakbackup:697 #, c-format msgid "WebDAV remote site already in sync!" msgstr "遠端的 WebDAV 站台已經在進行同步了！" #: standalone/drakbackup:701 #, c-format msgid "WebDAV transfer failed!" msgstr "WebDAV 傳輸失敗！" #: standalone/drakbackup:722 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "未放入 CDR/DVDR！" #: standalone/drakbackup:726 #, c-format msgid "Does not appear to be recordable media!" msgstr "似乎不是可燒錄的媒介裝置！" #: standalone/drakbackup:731 #, c-format msgid "Not erasable media!" msgstr "不是可抹寫的媒介裝置！" #: standalone/drakbackup:773 #, c-format msgid "This may take a moment to erase the media." msgstr "刪除該媒介裝置需要花費一些時間。" #: standalone/drakbackup:831 #, c-format msgid "Permission problem accessing CD." msgstr "權限的問題無法存取 CD." #: standalone/drakbackup:858 #, c-format msgid "No tape in %s!" msgstr "%s 內未放入磁帶！" #: standalone/drakbackup:964 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:983 standalone/drakbackup:1016 #, c-format msgid "Backup system files..." msgstr "備份系統檔案..." #: standalone/drakbackup:1017 standalone/drakbackup:1058 #, c-format msgid "Hard Disk Backup files..." msgstr "硬碟備份檔案..." #: standalone/drakbackup:1057 #, c-format msgid "Backup User files..." msgstr "備份使用者檔案..." #: standalone/drakbackup:1092 #, c-format msgid "Backup Other files..." msgstr "備份其他檔案..." #: standalone/drakbackup:1093 #, c-format msgid "Hard Disk Backup Progress..." msgstr "硬碟備份進度..." #: standalone/drakbackup:1098 #, c-format msgid "No changes to backup!" msgstr "備份沒有任何異動！" #: standalone/drakbackup:1116 standalone/drakbackup:1140 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Drakbackup 透過 %s 活動:\n" "\n" #: standalone/drakbackup:1125 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" "(!) FTP 連結錯誤：由於 FTP 連線錯誤, 備份檔案將沒透過 FTP 備份傳送出去。\n" #: standalone/drakbackup:1126 #, fuzzy, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "使用 FTP 上傳檔案時發生錯誤。\n" "請檢視您的 FTP 設定是否設定。" #: standalone/drakbackup:1128 #, fuzzy, c-format msgid "file list sent by FTP: %s\n" msgstr "" "透過 FTP 傳送檔案清單: %s\n" " " #: standalone/drakbackup:1145 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Drakbackup 使用 CD 方式進行處理：\n" "\n" #: standalone/drakbackup:1150 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Drakbackup 使用磁帶機方式進行處理：\n" "\n" #: standalone/drakbackup:1159 #, fuzzy, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" "執行 sendmail 程式時發生錯誤\n" " 由於該錯誤, 備份報表檔案將無法送出\n" " 請檢視您系統的 sendmail 是否有錯誤。" #: standalone/drakbackup:1160 #, c-format msgid " Error while sending mail. \n" msgstr "郵件發送時發生錯誤。\n" #: standalone/drakbackup:1190 #, c-format msgid "Can not create catalog!" msgstr "無法建立 catalog 資訊" #: standalone/drakbackup:1423 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "請檢視您所需要的全部項目。\n" #: standalone/drakbackup:1424 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "這個選項能夠備份與還原您系統的 /etc 目錄。\n" #: standalone/drakbackup:1425 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "備份您的系統檔案。(/etc 目錄)" #: standalone/drakbackup:1426 standalone/drakbackup:1490 #: standalone/drakbackup:1556 #, fuzzy, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "使用遞增備份 (不會覆蓋舊有備份)" #: standalone/drakbackup:1428 standalone/drakbackup:1492 #: standalone/drakbackup:1558 #, c-format msgid "Use Incremental Backups" msgstr "使用遞增備份 (不會覆蓋舊有備份)" #: standalone/drakbackup:1428 standalone/drakbackup:1492 #: standalone/drakbackup:1558 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1430 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "不要包含重要的檔案 (passwd、group、fstab)" #: standalone/drakbackup:1431 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "使用該選項您將能夠還原任何版本 /etc 檔案目錄." #: standalone/drakbackup:1462 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "請檢查希望要備份的所有使用者項目。" #: standalone/drakbackup:1489 #, c-format msgid "Do not include the browser cache" msgstr "不要包含瀏覽器的快取資料檔" #: standalone/drakbackup:1543 #, fuzzy, c-format msgid "Select the files or directories and click on 'OK'" msgstr "選取檔案或者是目錄, 然後點選 '加入'" #: standalone/drakbackup:1544 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "移除選取項目" #: standalone/drakbackup:1607 #, c-format msgid "Users" msgstr "使用者" #: standalone/drakbackup:1627 #, c-format msgid "Use network connection to backup" msgstr "使用 FTP 連線備份" #: standalone/drakbackup:1629 #, c-format msgid "Net Method:" msgstr "網路方式:" #: standalone/drakbackup:1633 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1634 #, fuzzy, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" "建立/傳送\n" "備份 SSH 的憑證檔案" #: standalone/drakbackup:1636 #, fuzzy, c-format msgid "Transfer Now" msgstr "" " 傳送 \n" "現在" #: standalone/drakbackup:1638 #, fuzzy, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" "其他 (非 drakbackup)\n" "認證憑證檔案已經存在" #: standalone/drakbackup:1641 #, fuzzy, c-format msgid "Host name or IP." msgstr "主機名稱" #: standalone/drakbackup:1646 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "請輸入要備份到該主機的所在目錄名稱" #: standalone/drakbackup:1658 #, c-format msgid "Remember this password" msgstr "記住該密碼" #: standalone/drakbackup:1674 #, c-format msgid "Need hostname, username and password!" msgstr "需要指定主機名稱、使用者與密碼！" #: standalone/drakbackup:1765 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "使用 CD/DVDROM 備份" #: standalone/drakbackup:1768 #, fuzzy, c-format msgid "Choose your CD/DVD device" msgstr "請選取您 CD/DVD 容量大小" #: standalone/drakbackup:1773 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "請選取您 CD/DVD 容量大小" #: standalone/drakbackup:1780 #, c-format msgid "Multisession CD" msgstr "Multisession CD" #: standalone/drakbackup:1782 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1788 #, fuzzy, c-format msgid "Erase your RW media (1st Session)" msgstr "如果您要先清除該讀寫媒介裝置上的資料 (1st Session), 請選取該項目" #: standalone/drakbackup:1789 #, c-format msgid " Erase Now " msgstr " 刪除中 " #: standalone/drakbackup:1795 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1797 #, fuzzy, c-format msgid "DVD-R media" msgstr "裝置設備" #: standalone/drakbackup:1799 #, fuzzy, c-format msgid "DVDRAM device" msgstr "裝置設備" #: standalone/drakbackup:1830 #, c-format msgid "No CD device defined!" msgstr "尚未有任何 CD 裝置定義!" #: standalone/drakbackup:1872 #, c-format msgid "Use tape to backup" msgstr "使用磁帶進行備份" #: standalone/drakbackup:1875 #, fuzzy, c-format msgid "Device name to use for backup" msgstr "請輸入您要用來備份使用的裝置名稱" #: standalone/drakbackup:1881 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1887 #, c-format msgid "Do not rewind tape after backup" msgstr "備份之後不回捲磁帶" #: standalone/drakbackup:1893 #, c-format msgid "Erase tape before backup" msgstr "使用磁帶進行備份" #: standalone/drakbackup:1899 #, fuzzy, c-format msgid "Eject tape after the backup" msgstr "使用磁帶進行備份" #: standalone/drakbackup:1973 #, c-format msgid "Enter the directory to save to:" msgstr "請輸入您要儲存的目錄名稱：" #: standalone/drakbackup:1977 #, fuzzy, c-format msgid "Directory to save to" msgstr "請輸入您要儲存的目錄名稱：" #: standalone/drakbackup:1983 #, fuzzy, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "請輸入備份允許最大的大小" #: standalone/drakbackup:2049 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: standalone/drakbackup:2054 #, c-format msgid "HardDrive / NFS" msgstr "硬碟 / NFS" #: standalone/drakbackup:2069 standalone/drakbackup:2070 #: standalone/drakbackup:2075 #, c-format msgid "hourly" msgstr "每小時" #: standalone/drakbackup:2069 standalone/drakbackup:2071 #: standalone/drakbackup:2076 #, c-format msgid "daily" msgstr "每天" #: standalone/drakbackup:2069 standalone/drakbackup:2072 #: standalone/drakbackup:2077 #, c-format msgid "weekly" msgstr "每週" #: standalone/drakbackup:2069 standalone/drakbackup:2073 #: standalone/drakbackup:2078 #, c-format msgid "monthly" msgstr "每月" #: standalone/drakbackup:2069 standalone/drakbackup:2074 #: standalone/drakbackup:2079 #, c-format msgid "custom" msgstr "自訂" #: standalone/drakbackup:2083 #, c-format msgid "January" msgstr "1月" #: standalone/drakbackup:2083 #, c-format msgid "February" msgstr "2月" #: standalone/drakbackup:2083 #, c-format msgid "March" msgstr "3月" #: standalone/drakbackup:2084 #, c-format msgid "April" msgstr "4月" #: standalone/drakbackup:2084 #, c-format msgid "May" msgstr "5月" #: standalone/drakbackup:2084 #, c-format msgid "June" msgstr "6月" #: standalone/drakbackup:2084 #, c-format msgid "July" msgstr "7月" #: standalone/drakbackup:2084 #, c-format msgid "August" msgstr "8月" #: standalone/drakbackup:2084 #, c-format msgid "September" msgstr "9月" #: standalone/drakbackup:2085 #, c-format msgid "October" msgstr "10月" #: standalone/drakbackup:2085 #, c-format msgid "November" msgstr "11月" #: standalone/drakbackup:2085 #, c-format msgid "December" msgstr "12月" #: standalone/drakbackup:2088 #, c-format msgid "Sunday" msgstr "星期日" #: standalone/drakbackup:2088 #, c-format msgid "Monday" msgstr "星期一" #: standalone/drakbackup:2088 #, c-format msgid "Tuesday" msgstr "星期二" #: standalone/drakbackup:2089 #, c-format msgid "Wednesday" msgstr "星期三" #: standalone/drakbackup:2089 #, c-format msgid "Thursday" msgstr "星期四" #: standalone/drakbackup:2089 #, c-format msgid "Friday" msgstr "星期五" #: standalone/drakbackup:2089 #, c-format msgid "Saturday" msgstr "星期六" #: standalone/drakbackup:2121 #, c-format msgid "Use daemon" msgstr "使用排程程式" #: standalone/drakbackup:2125 #, c-format msgid "Please choose the time interval between each backup" msgstr "請輸入每一次備份的間隔時間" #: standalone/drakbackup:2131 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2136 #, c-format msgid "Minute" msgstr "分" #: standalone/drakbackup:2140 #, c-format msgid "Hour" msgstr "時" #: standalone/drakbackup:2144 #, c-format msgid "Day" msgstr "天" #: standalone/drakbackup:2148 #, c-format msgid "Month" msgstr "月" #: standalone/drakbackup:2152 #, fuzzy, c-format msgid "Weekday" msgstr "星期三" #: standalone/drakbackup:2158 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "請選擇要用來備份的裝置" #: standalone/drakbackup:2164 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" "請確定您系統有安裝並且有啟用 cron 排程服務程式。\n" "\n" "請注意目前所有 '網路' 媒介都會使用硬碟。" #: standalone/drakbackup:2165 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2166 #, fuzzy, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "請確定您系統有安裝並且有啟用 cron 排程服務程式。\n" "\n" "請注意目前所有 '網路' 媒介都會使用硬碟。" #: standalone/drakbackup:2213 #, fuzzy, c-format msgid "Please choose the compression type" msgstr "請選取要回存的日期" #: standalone/drakbackup:2217 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "備份檔案啟用最大容量配給限制。" #: standalone/drakbackup:2219 #, c-format msgid "Send mail report after each backup to:" msgstr "在每次備份完成後發送郵件通知該使用者：" #: standalone/drakbackup:2225 #, c-format msgid "SMTP server for mail:" msgstr "電子郵件 SMTP 伺服器名稱：”" #: standalone/drakbackup:2230 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "備份成功後刪除硬碟上的 tar 檔案" #: standalone/drakbackup:2270 #, c-format msgid "What" msgstr "備份項目設定" #: standalone/drakbackup:2275 #, c-format msgid "Where" msgstr "備份儲存位置設定" #: standalone/drakbackup:2280 #, c-format msgid "When" msgstr "備份時間設定" #: standalone/drakbackup:2285 #, c-format msgid "More Options" msgstr "更多選項" #: standalone/drakbackup:2298 #, c-format msgid "Backup destination not configured..." msgstr "備份功能尚未設定..." #: standalone/drakbackup:2318 standalone/drakbackup:4241 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup 組態" #: standalone/drakbackup:2334 #, c-format msgid "Please choose where you want to backup" msgstr "請選取您要備份的項目" #: standalone/drakbackup:2337 #, fuzzy, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "備份成功後刪除硬碟上的 tar 檔案" #: standalone/drakbackup:2337 #, c-format msgid "Across Network" msgstr "透過網路" #: standalone/drakbackup:2337 #, c-format msgid "On CD-R" msgstr "於 CD-R 裝置" #: standalone/drakbackup:2337 #, c-format msgid "On Tape Device" msgstr "於磁帶機裝置" #: standalone/drakbackup:2383 #, c-format msgid "Backup Users" msgstr "備份使用者資料" #: standalone/drakbackup:2384 #, fuzzy, c-format msgid " (Default is all users)" msgstr "預設印表機" #: standalone/drakbackup:2397 #, c-format msgid "Please choose what you want to backup" msgstr "請選取您要備份的項目" #: standalone/drakbackup:2398 #, c-format msgid "Backup System" msgstr "備份系統資料" #: standalone/drakbackup:2400 #, c-format msgid "Select user manually" msgstr "手動選取使用者" #: standalone/drakbackup:2429 #, c-format msgid "Please select data to backup..." msgstr "請選擇用來備份資料的裝置..." #: standalone/drakbackup:2501 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "備份來源檔：\n" #: standalone/drakbackup:2502 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- 系統檔案：\n" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- 使用者檔案：\n" #: standalone/drakbackup:2506 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- 其他檔案：\n" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- 儲存於硬碟的路徑：%s\n" #: standalone/drakbackup:2509 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\t限制磁碟使用量為 %s MB\n" #: standalone/drakbackup:2512 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- 備份完成後刪除硬碟內先前備份的 tar 檔案。\n" #: standalone/drakbackup:2517 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- 燒錄到 CD 片" #: standalone/drakbackup:2518 #, c-format msgid "RW" msgstr "讀寫" #: standalone/drakbackup:2519 #, c-format msgid " on device: %s" msgstr " 位於位置: %s" #: standalone/drakbackup:2520 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2521 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- 儲存於該磁帶機裝置：%s" #: standalone/drakbackup:2522 #, c-format msgid "\t\tErase=%s" msgstr "\t\t刪除=%s" #: standalone/drakbackup:2524 #, c-format msgid "\tBackup directly to Tape\n" msgstr "\t將目錄備份到磁帶中\n" #: standalone/drakbackup:2526 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- 儲存 %s 於站台 - %s\n" #: standalone/drakbackup:2527 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t 使用者名稱: %s\n" "\t\t 位於路徑: %s \n" #: standalone/drakbackup:2528 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- 選項:\n" #: standalone/drakbackup:2529 #, c-format msgid "\tDo not include System Files\n" msgstr "\t不要包含系統檔案\n" #: standalone/drakbackup:2531 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\t使用 tar 與 bzip2 進行備份\n" #: standalone/drakbackup:2532 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\t使用 tar 與 gzip 進行備份\n" #: standalone/drakbackup:2533 #, fuzzy, c-format msgid "\tBackups use tar only\n" msgstr "\t使用 tar 與 gzip 進行備份\n" #: standalone/drakbackup:2535 #, c-format msgid "\tUse .backupignore files\n" msgstr "\t使用.backupignore 檔案\n" #: standalone/drakbackup:2536 #, c-format msgid "\tSend mail to %s\n" msgstr "\t傳送郵件給 %s\n" #: standalone/drakbackup:2537 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\t使用 SMTP 伺服器 %s\n" #: standalone/drakbackup:2539 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Daemon (%s) 服務程式包含 :\n" #: standalone/drakbackup:2540 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-硬碟\n" #: standalone/drakbackup:2541 #, c-format msgid "\t-CD-R.\n" msgstr "\t-光碟機\n" #: standalone/drakbackup:2542 #, c-format msgid "\t-Tape \n" msgstr "\t-磁帶機\n" #: standalone/drakbackup:2543 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-網路 (透過 FTP)\n" #: standalone/drakbackup:2544 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t網路 (透過 SSH)\n" #: standalone/drakbackup:2545 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-網路 (透過 rsync)\n" #: standalone/drakbackup:2546 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-網路 (透過 webdav)\n" #: standalone/drakbackup:2548 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "尚未設定任何組態項目, 請點選巫師或者是進階模式建立之。\n" #: standalone/drakbackup:2553 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "要回存的資料清單:\n" "\n" #: standalone/drakbackup:2555 #, fuzzy, c-format msgid "- Restore System Files.\n" msgstr "" "\n" "- 系統檔案:\n" #: standalone/drakbackup:2557 standalone/drakbackup:2567 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2560 #, fuzzy, c-format msgid "- Restore User Files: \n" msgstr "" "\n" "- 使用者檔案:\n" #: standalone/drakbackup:2565 #, fuzzy, c-format msgid "- Restore Other Files: \n" msgstr "" "\n" "- 其他檔案:\n" #: standalone/drakbackup:2744 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "毀損的資料檔案清單:\n" "\n" #: standalone/drakbackup:2746 #, c-format msgid "Please uncheck or remove it on next time." msgstr "下一次請取消或者是移除該項目。" #: standalone/drakbackup:2756 #, c-format msgid "Backup files are corrupted" msgstr "備份的檔案已經毀損" #: standalone/drakbackup:2777 #, c-format msgid " All of your selected data have been " msgstr " 您所選取的所有資料已經 " #: standalone/drakbackup:2778 #, c-format msgid " Successfully Restored on %s " msgstr " 成功回存到 %s " #: standalone/drakbackup:2898 #, c-format msgid " Restore Configuration " msgstr " 回存組態設定 " #: standalone/drakbackup:2926 #, c-format msgid "OK to restore the other files." msgstr "選取 OK 來回存其他檔案。" #: standalone/drakbackup:2942 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "回存的使用者清單 (只有回存最近使用者重要的檔案)" #: standalone/drakbackup:3007 #, fuzzy, c-format msgid "Please choose the date to restore:" msgstr "請選取要回存的日期" #: standalone/drakbackup:3044 #, c-format msgid "Restore from Hard Disk." msgstr "由硬碟回存。" #: standalone/drakbackup:3046 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "請輸入備份資料所要回存的目錄" #: standalone/drakbackup:3050 #, fuzzy, c-format msgid "Directory with backups" msgstr "回存所有備份資料" #: standalone/drakbackup:3104 #, c-format msgid "Select another media to restore from" msgstr "請選取要用來回存資料的裝置來源" #: standalone/drakbackup:3106 #, c-format msgid "Other Media" msgstr "其他裝置" #: standalone/drakbackup:3111 #, c-format msgid "Restore system" msgstr "回存系統" #: standalone/drakbackup:3112 #, c-format msgid "Restore Users" msgstr "回存使用者檔案" #: standalone/drakbackup:3113 #, c-format msgid "Restore Other" msgstr "回存其他檔案" #: standalone/drakbackup:3115 #, c-format msgid "Select path to restore (instead of /)" msgstr "選擇要回存的路徑名稱 (代替預設的 /)" #: standalone/drakbackup:3119 standalone/drakbackup:3401 #, fuzzy, c-format msgid "Path To Restore To" msgstr "自訂回存方式" #: standalone/drakbackup:3122 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "在回存前進行新的備份動作 (只能夠用在遞增式備份時.)" #: standalone/drakbackup:3124 #, c-format msgid "Remove user directories before restore." msgstr "在回存資料時先刪除使用者的相關目錄" #: standalone/drakbackup:3209 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3212 #, c-format msgid "Search Backups" msgstr "搜尋備份" #: standalone/drakbackup:3230 #, c-format msgid "No matches found..." msgstr "找不到符合的..." #: standalone/drakbackup:3234 #, fuzzy, c-format msgid "Restore Selected" msgstr "" "回存選取項目\n" "檔案" #: standalone/drakbackup:3369 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3375 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3384 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "回存選取項目\n" "檔案" #: standalone/drakbackup:3461 #, c-format msgid "Backup files not found at %s." msgstr "備份檔案找不到 - %s。" #: standalone/drakbackup:3474 #, c-format msgid "Restore From CD" msgstr "使用光碟片回存" #: standalone/drakbackup:3474 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "請置入標籤名稱為 %s 的 CD 片到光碟機內\n" "(掛載點為 /mnt/cdrom)" #: standalone/drakbackup:3476 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "不正確的 CD 片標籤, 磁碟標籤名稱為 %s。" #: standalone/drakbackup:3486 #, c-format msgid "Restore From Tape" msgstr "使用磁帶回存" #: standalone/drakbackup:3486 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "請置入標籤名稱為 %s 的磁帶\n" "到 %s 磁帶機內" #: standalone/drakbackup:3488 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "不正確的磁帶標籤, 磁帶標籤為 %s。" #: standalone/drakbackup:3499 #, c-format msgid "Restore Via Network" msgstr "使用網路回存檔案" #: standalone/drakbackup:3499 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "網路回存使用的協定：%s" #: standalone/drakbackup:3500 #, c-format msgid "Host Name" msgstr "主機名稱" #: standalone/drakbackup:3501 #, c-format msgid "Host Path or Module" msgstr "主機路徑或是模組名稱" #: standalone/drakbackup:3508 #, c-format msgid "Password required" msgstr "需要輸入密碼" #: standalone/drakbackup:3514 #, c-format msgid "Username required" msgstr "需要輸入帳號名稱" #: standalone/drakbackup:3517 #, c-format msgid "Hostname required" msgstr "需要輸入主機名稱" #: standalone/drakbackup:3522 #, c-format msgid "Path or Module required" msgstr "需要輸入路徑或是模組名稱" #: standalone/drakbackup:3535 #, c-format msgid "Files Restored..." msgstr "要回存的檔案..." #: standalone/drakbackup:3538 #, c-format msgid "Restore Failed..." msgstr "回存失敗..." #: standalone/drakbackup:3556 #, fuzzy, c-format msgid "%s not retrieved..." msgstr "%s 沒有正常回應" #: standalone/drakbackup:3777 standalone/drakbackup:3846 #, c-format msgid "Search for files to restore" msgstr "搜尋檔案來回存" #: standalone/drakbackup:3781 #, c-format msgid "Restore all backups" msgstr "回存所有備份資料" #: standalone/drakbackup:3789 #, c-format msgid "Custom Restore" msgstr "自訂回存方式" #: standalone/drakbackup:3793 standalone/drakbackup:3842 #, c-format msgid "Restore From Catalog" msgstr "使用型錄回存" #: standalone/drakbackup:3814 #, c-format msgid "Unable to find backups to restore...\n" msgstr "無法找到備份以回存...\n" #: standalone/drakbackup:3815 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "這樣子正確嗎？" #: standalone/drakbackup:3816 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3818 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3834 #, c-format msgid "CD in place - continue." msgstr "CD 片就緒 - 繼續執行。" #: standalone/drakbackup:3839 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3840 #, fuzzy, c-format msgid "Directory To Restore From" msgstr "使用光碟片回存" #: standalone/drakbackup:3876 #, c-format msgid "Restore Progress" msgstr "回存進度" #: standalone/drakbackup:3987 #, c-format msgid "Build Backup" msgstr "建立備份" #: standalone/drakbackup:4020 standalone/drakbackup:4340 #, c-format msgid "Restore" msgstr "回存" #: standalone/drakbackup:4108 standalone/harddrake2:481 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "下列的套件將會被安裝上" #: standalone/drakbackup:4135 #, c-format msgid "Please select data to restore..." msgstr "請選取要回存的資料..." #: standalone/drakbackup:4175 #, c-format msgid "Backup system files" msgstr "備份系統檔案" #: standalone/drakbackup:4178 #, c-format msgid "Backup user files" msgstr "備份使用者檔案" #: standalone/drakbackup:4181 #, c-format msgid "Backup other files" msgstr "備份其他檔案" #: standalone/drakbackup:4184 standalone/drakbackup:4218 #, c-format msgid "Total Progress" msgstr "全部進度" #: standalone/drakbackup:4210 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "正在送出檔案..." #: standalone/drakbackup:4213 #, c-format msgid "Sending files..." msgstr "正在送出檔案..." #: standalone/drakbackup:4283 #, c-format msgid "Backup Now from configuration file" msgstr "依據目前組態設定開始備份" #: standalone/drakbackup:4288 #, c-format msgid "View Backup Configuration." msgstr "檢視備份組態設定" #: standalone/drakbackup:4314 #, c-format msgid "Wizard Configuration" msgstr "精靈設定模式" #: standalone/drakbackup:4319 #, c-format msgid "Advanced Configuration" msgstr "進階設定" #: standalone/drakbackup:4324 #, fuzzy, c-format msgid "View Configuration" msgstr "組態設定" #: standalone/drakbackup:4328 #, c-format msgid "View Last Log" msgstr "查看最新紀錄" #: standalone/drakbackup:4333 #, c-format msgid "Backup Now" msgstr "立即備份" #: standalone/drakbackup:4337 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "尚未產生組態設定檔案, 請點選\n" "巫師或者是進階模式建立之。" #: standalone/drakbackup:4357 standalone/drakbackup:4360 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:64 #, fuzzy, c-format msgid "Graphical boot theme selection" msgstr "印表機型號選擇" #: standalone/drakboot:64 #, c-format msgid "System mode" msgstr "系統模式" #: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:189 #: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/檔案 (_F)" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/檔案 (F)/結束 (_Q)" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:191 #: standalone/logdrake:76 standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:148 #, c-format msgid "Install themes" msgstr "安裝佈景" #: standalone/drakboot:149 #, c-format msgid "Create new theme" msgstr "建立新的佈景" #: standalone/drakboot:161 #, c-format msgid "Use graphical boot" msgstr "使用圖形化開機畫面" #: standalone/drakboot:166 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:167 #, fuzzy, c-format msgid "Do you want to configure it now?" msgstr "您想要測試您的設定值嗎？" #: standalone/drakboot:177 #, c-format msgid "Theme" msgstr "佈景檔" #: standalone/drakboot:180 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "在 console\n" "顯示佈景" #: standalone/drakboot:189 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "開機時啟動 X Window 圖形作業環境" #: standalone/drakboot:197 #, c-format msgid "No, I do not want autologin" msgstr "不，我不需要自動登入 (AutoLogin)" #: standalone/drakboot:198 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "是的，我要用這個 (使用者、桌面) 來自動登入" #: standalone/drakboot:201 #, c-format msgid "Default user" msgstr "預設使用者" #: standalone/drakboot:202 #, c-format msgid "Default desktop" msgstr "預設桌面" #: standalone/drakboot:310 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, c-format msgid "Mandrakelinux Bug Report Tool" msgstr "Mandrakelinux 臭蟲回報工具" #: standalone/drakbug:46 #, c-format msgid "Mandrakelinux Control Center" msgstr "Mandrakelinux 控制中心" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "同步工具" #: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 #: standalone/drakbug:150 standalone/drakbug:154 #, c-format msgid "Standalone Tools" msgstr "單一工具" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake 硬體偵測設定" #: standalone/drakbug:51 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline 線上服務" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Mandrake 選單編輯器" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec 安全設定偵測" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "遠端印表機" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "套件管理程式" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi 套件管理" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "Windows 整合工具" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "Userdrake 使用者管理" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "設定巫師" #: standalone/drakbug:81 #, c-format msgid "Select Mandrakesoft Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "搜尋套件" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "套件： " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "核心：" #: standalone/drakbug:100 #, fuzzy, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" "要回報任何臭蟲問題, 請點選回報的按鈕.\n" "這將會開啟瀏覽器於 %s\n" " 其中你將找到一表格填入. 以上顯示的資訊將 會\n" "被傳送到那伺服器." #: standalone/drakbug:106 #, c-format msgid "Report" msgstr "回報" #: standalone/drakbug:163 #, c-format msgid "Not installed" msgstr "尚未安裝" #: standalone/drakbug:175 #, fuzzy, c-format msgid "Package not installed" msgstr "尚未安裝" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, fuzzy, c-format msgid "not defined" msgstr "重新設定" #: standalone/drakclock:41 #, fuzzy, c-format msgid "Change Time Zone" msgstr "時區" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "時區 - DakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "硬體時鐘設定為 GMT 時間嗎?" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "網路介面" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "網路回存使用的協定：%s" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "伺服器" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "重設" #: standalone/drakclock:224 #, fuzzy, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "這個 %s 套件需要安裝上, 您要安裝該套件嗎？" #: standalone/drakconnect:86 #, c-format msgid "Network configuration (%d adapters)" msgstr "網路組態 (%d 介面卡)" #: standalone/drakconnect:97 standalone/drakconnect:822 #: standalone/drakroam:159 #, c-format msgid "Gateway:" msgstr "閘道器：" #: standalone/drakconnect:97 standalone/drakconnect:822 #, c-format msgid "Interface:" msgstr "介面:" #: standalone/drakconnect:101 standalone/net_monitor:122 #, c-format msgid "Wait please" msgstr "請稍後" #: standalone/drakconnect:117 #, c-format msgid "Interface" msgstr "介面" #: standalone/drakconnect:117 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "狀態" #: standalone/drakconnect:134 #, c-format msgid "Hostname: " msgstr "主機名稱：" #: standalone/drakconnect:136 #, c-format msgid "Configure hostname..." msgstr "設定主機名稱..." #: standalone/drakconnect:150 standalone/drakconnect:878 #, c-format msgid "LAN configuration" msgstr "區域網路設定" #: standalone/drakconnect:155 #, c-format msgid "Configure Local Area Network..." msgstr "設定區域網路..." #: standalone/drakconnect:163 standalone/drakconnect:247 #: standalone/drakconnect:251 #, c-format msgid "Apply" msgstr "套用" #: standalone/drakconnect:198 #, c-format msgid "Manage connections" msgstr "管理連線" #: standalone/drakconnect:225 #, fuzzy, c-format msgid "Device selected" msgstr "移除選取項目" #: standalone/drakconnect:307 #, fuzzy, c-format msgid "IP configuration" msgstr "CUPS 設定組態" #: standalone/drakconnect:346 #, fuzzy, c-format msgid "DNS servers" msgstr "DNS 伺服器" #: standalone/drakconnect:354 #, fuzzy, c-format msgid "Search Domain" msgstr "NIS 域名" #: standalone/drakconnect:362 #, fuzzy, c-format msgid "static" msgstr "自動分配 IP" #: standalone/drakconnect:362 standalone/drakroam:140 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:526 #, c-format msgid "Flow control" msgstr "流量控制" #: standalone/drakconnect:527 #, fuzzy, c-format msgid "Line termination" msgstr "Internet 平台" #: standalone/drakconnect:538 #, fuzzy, c-format msgid "Modem timeout" msgstr "核心啟動時間逾時時間" #: standalone/drakconnect:542 #, fuzzy, c-format msgid "Use lock file" msgstr "選擇檔案" #: standalone/drakconnect:544 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:547 #, fuzzy, c-format msgid "Busy wait" msgstr "科威特" #: standalone/drakconnect:552 #, fuzzy, c-format msgid "Modem sound" msgstr "型號" #: standalone/drakconnect:553 #, c-format msgid "Enable" msgstr "啟動" #: standalone/drakconnect:553 #, c-format msgid "Disable" msgstr "不啟用" #: standalone/drakconnect:604 standalone/harddrake2:49 #, c-format msgid "Media class" msgstr "媒介類別" #: standalone/drakconnect:605 standalone/drakfloppy:136 #, c-format msgid "Module name" msgstr "模組名稱" #: standalone/drakconnect:606 #, c-format msgid "Mac Address" msgstr " MAC 位址" #: standalone/drakconnect:607 standalone/harddrake2:27 #: standalone/harddrake2:119 #, c-format msgid "Bus" msgstr "匯流排" #: standalone/drakconnect:608 standalone/harddrake2:33 #, c-format msgid "Location on the bus" msgstr "匯流排上的位置" #: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "您系統偵測不到有網路卡的存在，請重新執行硬體設定工具。" #: standalone/drakconnect:715 #, fuzzy, c-format msgid "Remove a network interface" msgstr "選取網路介面" #: standalone/drakconnect:719 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "選取網路介面" #: standalone/drakconnect:751 #, fuzzy, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "重新啟動網路時發生了下面的錯誤：\n" "\n" "%s" #: standalone/drakconnect:752 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:768 #, c-format msgid "No IP" msgstr "沒有 IP" #: standalone/drakconnect:769 #, c-format msgid "No Mask" msgstr "沒有遮罩" #: standalone/drakconnect:770 standalone/drakconnect:949 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:770 standalone/drakconnect:949 #, fuzzy, c-format msgid "down" msgstr "完成" #: standalone/drakconnect:812 standalone/net_monitor:471 #, c-format msgid "Connected" msgstr "已連線" #: standalone/drakconnect:812 standalone/net_monitor:471 #, c-format msgid "Not connected" msgstr "尚未連線" #: standalone/drakconnect:814 #, c-format msgid "Disconnect..." msgstr "斷線..." #: standalone/drakconnect:814 #, c-format msgid "Connect..." msgstr "連線..." #: standalone/drakconnect:843 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "警告，偵測到其他的網路連線，也許對方正在使用您的網路" #: standalone/drakconnect:874 #, c-format msgid "Deactivate now" msgstr "立即關閉" #: standalone/drakconnect:874 #, c-format msgid "Activate now" msgstr "立即啟動" #: standalone/drakconnect:882 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "您還沒有任何已經設定好的網路介面。\n" "請點選設定來進行網路介面設定動作" #: standalone/drakconnect:896 #, c-format msgid "LAN Configuration" msgstr "區域網路設定" #: standalone/drakconnect:908 #, c-format msgid "Adapter %s: %s" msgstr "介面卡 %s： %s" #: standalone/drakconnect:917 #, c-format msgid "Boot Protocol" msgstr "通訊協定" #: standalone/drakconnect:918 #, c-format msgid "Started on boot" msgstr "於開機時啟動" #: standalone/drakconnect:954 #, fuzzy, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrakelinux Control Center" msgstr "網路介面尚未設定, 請執行設定巫師" #: standalone/drakconnect:1009 standalone/net_applet:61 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandrakelinux Control Center" msgstr "" "您沒有任何已設定好的網路連線。\n" "請由 Mandrakelinux 控制中心啟動 \"%s\" 設定精靈" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:1010 standalone/net_applet:62 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "設定一個新的網路介面 (區域網路、ISDN、ADSL、...)" #: standalone/drakconnect:1017 #, c-format msgid "Internet connection configuration" msgstr "網際網路連線設定" #: standalone/drakconnect:1035 #, c-format msgid "Third DNS server (optional)" msgstr "第三台 DNS 伺服器 (可不輸入)" #: standalone/drakconnect:1057 #, c-format msgid "Internet Connection Configuration" msgstr "網際網路連線設定" #: standalone/drakconnect:1058 #, c-format msgid "Internet access" msgstr "網際網路存取" #: standalone/drakconnect:1060 standalone/net_monitor:101 #, c-format msgid "Connection type: " msgstr "連線項目： " #: standalone/drakconnect:1063 #, c-format msgid "Status:" msgstr "狀態：" #: standalone/drakedm:34 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "GDM (GNOME 登入管理員)" #: standalone/drakedm:35 #, c-format msgid "KDM (KDE Display Manager)" msgstr "KDM (KDE 登入管理員)" #: standalone/drakedm:36 #, c-format msgid "MdkKDM (Mandrakelinux Display Manager)" msgstr "MdkKDM (Mandrakelinux 登入管理員)" #: standalone/drakedm:37 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X 環境登入管理員)" #: standalone/drakedm:55 #, c-format msgid "Choosing a display manager" msgstr "選擇一個登入管理員" #: standalone/drakedm:56 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:79 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "改變完成，您要重新啟動 dm 服務嗎？" #: standalone/drakedm:80 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfloppy:41 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:78 #, c-format msgid "Boot disk creation" msgstr "製作開機片" #: standalone/drakfloppy:79 #, c-format msgid "General" msgstr "一般" #: standalone/drakfloppy:82 standalone/harddrake2:146 #, c-format msgid "Device" msgstr "裝置" #: standalone/drakfloppy:88 #, c-format msgid "Kernel version" msgstr "核心版本" #: standalone/drakfloppy:103 #, c-format msgid "Preferences" msgstr "偏好設定" #: standalone/drakfloppy:117 #, c-format msgid "Advanced preferences" msgstr "進階選項" #: standalone/drakfloppy:136 #, c-format msgid "Size" msgstr "大小" #: standalone/drakfloppy:139 #, fuzzy, c-format msgid "Mkinitrd optional arguments" msgstr "mkinitrd 選項" #: standalone/drakfloppy:141 #, c-format msgid "force" msgstr "強迫" #: standalone/drakfloppy:142 #, c-format msgid "omit raid modules" msgstr "省略 raid 模組" #: standalone/drakfloppy:143 #, c-format msgid "if needed" msgstr "若需要的話" #: standalone/drakfloppy:144 #, c-format msgid "omit scsi modules" msgstr "省略 scsi 模組" #: standalone/drakfloppy:147 #, c-format msgid "Add a module" msgstr "新增模組" #: standalone/drakfloppy:156 #, c-format msgid "Remove a module" msgstr "移除一模組" #: standalone/drakfloppy:291 #, c-format msgid "Be sure a media is present for the device %s" msgstr "請確定裝置 %s 內已放入磁碟片" #: standalone/drakfloppy:297 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "在裝置 %s 內找不到磁碟片或它具有防寫保護。\n" "請放入一張磁碟片。" #: standalone/drakfloppy:300 #, c-format msgid "Unable to fork: %s" msgstr "無法建立另一行程：%s" #: standalone/drakfloppy:303 #, fuzzy, c-format msgid "Floppy creation completed" msgstr "連線速度" #: standalone/drakfloppy:303 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "開機片已經成功的建立了\n" #. -PO: Do not alter the and tags #: standalone/drakfloppy:308 #, fuzzy, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "無法正常關閉 mkbootdisk：\n" " %s\n" " %s" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "尋找已安裝字型" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "反向選取已安裝字型" #: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "解析所有字型" #: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "找不到字型" #: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326 #: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393 #: standalone/drakfont:411 standalone/drakfont:425 #, c-format msgid "done" msgstr "完成" #: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "在已經掛載的分割區內找不到任何字型" #: standalone/drakfont:257 #, c-format msgid "Reselect correct fonts" msgstr "重新選取正確的字型" #: standalone/drakfont:260 #, c-format msgid "Could not find any font.\n" msgstr "找不到任何字型。\n" #: standalone/drakfont:270 #, c-format msgid "Search for fonts in installed list" msgstr "於已安裝清單內搜尋字型" #: standalone/drakfont:295 #, fuzzy, c-format msgid "%s fonts conversion" msgstr "pfm 字型轉換" #: standalone/drakfont:324 #, c-format msgid "Fonts copy" msgstr "字型複製" #: standalone/drakfont:327 #, c-format msgid "True Type fonts installation" msgstr "True Type 字體檔安裝" #: standalone/drakfont:334 #, c-format msgid "please wait during ttmkfdir..." msgstr "請稍候，執行 ttmkfdir 程式中..." #: standalone/drakfont:335 #, c-format msgid "True Type install done" msgstr "True Type 字體安裝完成" #: standalone/drakfont:341 standalone/drakfont:356 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:350 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:360 #, c-format msgid "Suppress Temporary Files" msgstr "不刪除暫存檔案" #: standalone/drakfont:363 #, c-format msgid "Restart XFS" msgstr "重新啟動 XFS 服務" #: standalone/drakfont:409 standalone/drakfont:419 #, c-format msgid "Suppress Fonts Files" msgstr "不刪除字型檔" #: standalone/drakfont:421 #, c-format msgid "xfs restart" msgstr "XFS 服務重新啟動" #: standalone/drakfont:429 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "進行安裝字型前, 請務必確認您有適當的權限能夠存取使用, \n" "其中包含這些字型都是正確沒錯誤的。要不然, 極端情況下, \n" "您的 X 伺服器可能會因為不正確的字型檔案而不預期結束。" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "字型清單" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "關於" #: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726 #, c-format msgid "Uninstall" msgstr "移除" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "匯入" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:511 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:520 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:536 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:555 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "選擇能夠使用該字體的應用程式：" #: standalone/drakfont:556 #, fuzzy, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "進行安裝字型前, 請務必確認您有適當的權限能夠存取使用, \n" "其中包含這些字型都是正確沒錯誤的。要不然, 極端情況下, \n" "您的 X 伺服器可能會因為不正確的字型檔案而不預期結束。" #: standalone/drakfont:566 #, c-format msgid "Ghostscript" msgstr "GhostScript" #: standalone/drakfont:567 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:568 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:569 #, c-format msgid "Generic Printers" msgstr "一般印表機" #: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "選取字型檔案或者是所在目錄, 點選 '加入'" #: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "檔案選取" #: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "" #: standalone/drakfont:653 #, fuzzy, c-format msgid "Import fonts" msgstr "字型匯入" #: standalone/drakfont:658 #, fuzzy, c-format msgid "Install fonts" msgstr "移除字型" #: standalone/drakfont:693 #, c-format msgid "click here if you are sure." msgstr "確定的話請點選這裡" #: standalone/drakfont:695 #, c-format msgid "here if no." msgstr "不確定點選這裡" #: standalone/drakfont:734 #, c-format msgid "Unselected All" msgstr "取消選取所有項目" #: standalone/drakfont:737 #, c-format msgid "Selected All" msgstr "選取所有項目" #: standalone/drakfont:740 #, c-format msgid "Remove List" msgstr "移除清單" #: standalone/drakfont:751 standalone/drakfont:770 #, fuzzy, c-format msgid "Importing fonts" msgstr "字型匯入" #: standalone/drakfont:755 standalone/drakfont:775 #, c-format msgid "Initial tests" msgstr "初始測試" #: standalone/drakfont:756 #, c-format msgid "Copy fonts on your system" msgstr "複製字體至系統" #: standalone/drakfont:757 #, c-format msgid "Install & convert Fonts" msgstr "安裝與轉換字體" #: standalone/drakfont:758 #, c-format msgid "Post Install" msgstr "後續安裝設定" #: standalone/drakfont:776 #, c-format msgid "Remove fonts on your system" msgstr "由您的系統移除該字體檔案" #: standalone/drakfont:777 #, c-format msgid "Post Uninstall" msgstr "後續反安裝設定" #: standalone/drakgw:58 standalone/drakgw:191 #, c-format msgid "Internet Connection Sharing" msgstr "Internet 連線分享" #: standalone/drakgw:111 standalone/drakvpn:51 #, fuzzy, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "抱歉, 目前只有支援使用 2.4 的核心版本。" #: standalone/drakgw:122 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Internet 連線共享目前關閉了。" #: standalone/drakgw:123 #, fuzzy, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Internet 連線共享已經設定完成了。目前是處於關閉不使用狀態。\n" "\n" "您希望要處理那個？" #: standalone/drakgw:127 standalone/drakvpn:127 #, c-format msgid "enable" msgstr "開啟" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "重新設定" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735 #, c-format msgid "dismiss" msgstr "取消" #: standalone/drakgw:134 #, c-format msgid "Enabling servers..." msgstr "啟用伺服器中..." #: standalone/drakgw:146 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Internet 連線工想目前開啟了。" #: standalone/drakgw:149 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Internet 連線分享目前處於可用狀態" #: standalone/drakgw:150 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "目前 Internet 連線分享的設定已經完成了.. 目前已經可用了..\n" "您目前打算要做什麼呢？" #: standalone/drakgw:154 standalone/drakvpn:101 #, c-format msgid "disable" msgstr "關閉" #: standalone/drakgw:157 #, c-format msgid "Disabling servers..." msgstr "正在關閉伺服器..." #: standalone/drakgw:172 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Internet 連線共享目前關閉了。" #: standalone/drakgw:192 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "目前要進行Internet連線分享的設定, 這個功能能夠\n" "讓其他區域網路內的電腦透過這台主機的頻寬分享\n" "連上 Internet。請注意: 您需要另外一張網路卡以便\n" "於提供區域網路電腦連線存取分享使用。" #: standalone/drakgw:236 #, c-format msgid "Interface %s (using module %s)" msgstr "介面 %s (使用 %s 模組)" #: standalone/drakgw:237 #, c-format msgid "Interface %s" msgstr "介面 %s" #: standalone/drakgw:246 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "您系統並沒有網路卡存在" #: standalone/drakgw:253 #, c-format msgid "Network interface" msgstr "網路介面" #: standalone/drakgw:254 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "您的系統目前有一張已經設定好的網路卡:\n" "\n" "%s\n" "\n" "現在要進行這張網路卡與區域網路的連線組態設定。" #: standalone/drakgw:260 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "選取網路介面" #: standalone/drakgw:261 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "請選擇要連線到區域網路內的網路卡。" #: standalone/drakgw:290 #, c-format msgid "Network interface already configured" msgstr "網路介面已經設定完成" #: standalone/drakgw:291 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "警告, 系統網路卡介面 (%s) 已經設定過了。\n" "\n" "您確定要自動重新設定過？\n" "\n" "如果您有特殊需求, 可以選擇手動方式設定。" #: standalone/drakgw:296 #, c-format msgid "Automatic reconfiguration" msgstr "自動重新設定" #: standalone/drakgw:296 #, c-format msgid "No (experts only)" msgstr "" #: standalone/drakgw:297 #, c-format msgid "Show current interface configuration" msgstr "顯示目前網路介面組態設定" #: standalone/drakgw:298 #, c-format msgid "Current interface configuration" msgstr "目前介面組態設定" #: standalone/drakgw:299 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "目前 '%s' 的組態設定:\n" "\n" "網路: %s\n" "IP 位址： %s\n" "IP 屬性：%s\n" "驅動程式： %s" #: standalone/drakgw:312 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "設定程式已經紀錄了目前的組態設定資訊, 並假設您已經設定好了\n" "DHCP 服務；接下來請確認設定程式能夠正確取的您區域網路資訊；\n" "如果設定程式無法正確取得 DHCP 服務組態的話, 相關設定將不會繼續。\n" "\n" "沒問題的話, 安裝程式將會重新設定您的網路介面, 設定由 DHCP 主機\n" "取得IP資訊。\n" "\n" #: standalone/drakgw:319 #, c-format msgid "Local Network adress" msgstr "內部網路IP位址" #: standalone/drakgw:323 #, fuzzy, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "DHCP 伺服器設定。\n" "\n" "您可以在這邊選擇設定 DHCP 的相關組態設定。\n" "如果您不清楚相關參數的意思, 您可以為持空白不要輸入資料。\n" "\n" #: standalone/drakgw:327 #, c-format msgid "(This) DHCP Server IP" msgstr "該 DHCP 主機 IP" #: standalone/drakgw:328 #, c-format msgid "The DNS Server IP" msgstr "該 DHCP 主機 IP" #: standalone/drakgw:329 #, c-format msgid "The internal domain name" msgstr "內部網域的名稱" #: standalone/drakgw:330 #, c-format msgid "The DHCP start range" msgstr "DHCP 起始範圍" #: standalone/drakgw:331 #, c-format msgid "The DHCP end range" msgstr "DHCP 結束範圍" #: standalone/drakgw:332 #, c-format msgid "The default lease (in seconds)" msgstr "預設租約時間 (秒為單位)" #: standalone/drakgw:333 #, c-format msgid "The maximum lease (in seconds)" msgstr "最大租約時間 (秒為單位)" #: standalone/drakgw:334 #, c-format msgid "Re-configure interface and DHCP server" msgstr "重新設定該網路介面與 DHCP 伺服器" #: standalone/drakgw:341 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "該區域網路並不是以 .0 結尾, 放棄..." #: standalone/drakgw:351 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "潛在的 LAN 位址衝突發現於目前 %s 設定!\n" #: standalone/drakgw:361 #, c-format msgid "Configuring..." msgstr "設定中..." #: standalone/drakgw:362 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "設定 script, 安裝軟體, 啟動相關的 servers 服務" #: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278 #, c-format msgid "Problems installing package %s" msgstr "安裝 %s 套件發生錯誤" #: standalone/drakgw:598 #, fuzzy, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "每個項目都已經設定好了。\n" "現在您的系統已經透過 DHCP 動態 IP 分配的方式取得連線 IP, \n" "並且也已經能夠透過其他電腦的頻寬分享存取 Internet 服務。" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 Mandrakesoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, fuzzy, c-format msgid "Mandrakelinux Help Center" msgstr "Mandrake 控制中心" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakperm:22 #, c-format msgid "System settings" msgstr "系統設定" #: standalone/drakperm:23 #, fuzzy, c-format msgid "Custom settings" msgstr "自訂磁碟分割" #: standalone/drakperm:24 #, fuzzy, c-format msgid "Custom & system settings" msgstr "自訂磁碟分割" #: standalone/drakperm:44 #, c-format msgid "Editable" msgstr "可編輯的" #: standalone/drakperm:49 standalone/drakperm:329 #, c-format msgid "Path" msgstr "路徑" #: standalone/drakperm:49 standalone/drakperm:251 #, c-format msgid "User" msgstr "使用者" #: standalone/drakperm:49 standalone/drakperm:251 #, c-format msgid "Group" msgstr "群組" #: standalone/drakperm:49 standalone/drakperm:341 #, c-format msgid "Permissions" msgstr "權限" #: standalone/drakperm:58 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "編輯目前規則" #: standalone/drakperm:107 #, fuzzy, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Drakperm 程式能夠讓使用者檢視以及修改重要檔案的權限, 包含擁有者、\n" "群組等資訊。另外您也可以自行編輯創造更多屬於自訂的規則項目。" #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "向上" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "向下" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "" #: standalone/drakperm:123 #, fuzzy, c-format msgid "Add a rule" msgstr "新增規則" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "於結尾新增一項規則" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "刪除所選取的規則" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "編輯" #: standalone/drakperm:243 #, c-format msgid "browse" msgstr "瀏覽" #: standalone/drakperm:248 #, c-format msgid "user" msgstr "擁有者" #: standalone/drakperm:248 #, c-format msgid "group" msgstr "群組" #: standalone/drakperm:248 #, c-format msgid "other" msgstr "其它" #: standalone/drakperm:253 #, c-format msgid "Read" msgstr "已讀" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:256 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: standalone/drakperm:260 #, c-format msgid "Write" msgstr "寫入" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:263 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: standalone/drakperm:267 #, c-format msgid "Execute" msgstr "執行" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:270 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:273 #, fuzzy, c-format msgid "Sticky-bit" msgstr "Sticky-Bit" #: standalone/drakperm:273 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "使用於目錄:\n" " 只有該檔案或目錄的擁有者才可以刪除它" #: standalone/drakperm:274 #, c-format msgid "Set-UID" msgstr "Set-UID" #: standalone/drakperm:274 #, c-format msgid "Use owner id for execution" msgstr "執行時另外具備該擁有者權限" #: standalone/drakperm:275 #, c-format msgid "Set-GID" msgstr "Set-GID" #: standalone/drakperm:275 #, c-format msgid "Use group id for execution" msgstr "執行時另外具備該群組權限" #: standalone/drakperm:293 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "使用者：" #: standalone/drakperm:295 #, c-format msgid "Group:" msgstr "分類：" #: standalone/drakperm:299 #, c-format msgid "Current user" msgstr "目前使用者" #: standalone/drakperm:300 #, c-format msgid "When checked, owner and group will not be changed" msgstr "當選取時, 擁有者與群組將不被更動" #: standalone/drakperm:310 #, c-format msgid "Path selection" msgstr "路徑選擇" #: standalone/drakperm:335 #, c-format msgid "Property" msgstr "特性" #: standalone/drakpxe:55 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "dhcpd 服務主機設定" #: standalone/drakpxe:111 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "dhcpd 服務主機設定" #: standalone/drakpxe:112 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "目前要進行Internet連線分享的設定, 這個功能能夠\n" "讓其他區域網路內的電腦透過這台主機的頻寬分享\n" "連上 Internet。請注意: 您需要另外一張網路卡以便\n" "於提供區域網路電腦連線存取分享使用。" #: standalone/drakpxe:143 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "請選擇您要用來連上 Internet 的網路卡" #: standalone/drakpxe:144 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "介面 %s (使用 %s 模組)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "DHCP 開始 ip" #: standalone/drakpxe:174 #, fuzzy, c-format msgid "The DHCP end ip" msgstr "DHCP 結束範圍" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: standalone/drakpxe:192 #, fuzzy, c-format msgid "Installation image directory" msgstr "Xpmac (顯示卡驅動程式的安裝)" #: standalone/drakpxe:196 #, fuzzy, c-format msgid "No image found" msgstr "找不到印表機！" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: standalone/drakpxe:215 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "正在製作自動安裝軟片" #: standalone/drakroam:137 #, c-format msgid "ESSID" msgstr "" #: standalone/drakroam:138 standalone/drakvpn:1143 #, c-format msgid "Mode" msgstr "模式" #: standalone/drakroam:139 standalone/harddrake2:96 #, c-format msgid "Channel" msgstr "取消" #: standalone/drakroam:141 #, c-format msgid "Key" msgstr "" #: standalone/drakroam:157 #, c-format msgid "Network:" msgstr "" #: standalone/drakroam:158 #, c-format msgid "IP:" msgstr "" #: standalone/drakroam:160 #, c-format msgid "Mode:" msgstr "" #: standalone/drakroam:161 #, c-format msgid "Encryption:" msgstr "" #: standalone/drakroam:162 #, c-format msgid "Signal:" msgstr "" #: standalone/drakroam:176 #, c-format msgid "Roaming" msgstr "" #: standalone/drakroam:179 standalone/drakroam:258 #, c-format msgid "Roaming: %s" msgstr "" #: standalone/drakroam:179 standalone/drakroam:257 standalone/drakvpn:1061 #: standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "off" msgstr "關" #: standalone/drakroam:186 #, c-format msgid "Scan interval (sec): " msgstr "" #: standalone/drakroam:189 #, c-format msgid "Set" msgstr "" #: standalone/drakroam:194 #, c-format msgid "Known Networks (Drag up/down or edit)" msgstr "" #: standalone/drakroam:202 #, c-format msgid "Connect" msgstr "連線" #: standalone/drakroam:210 #, c-format msgid "Available Networks" msgstr "" #: standalone/drakroam:221 #, c-format msgid "Rescan" msgstr "重複掃描" #: standalone/drakroam:225 #, c-format msgid "Status" msgstr "狀態" #: standalone/drakroam:232 #, c-format msgid "Disconnect" msgstr "斷線" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:233 standalone/net_applet:90 #: standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "重新載入" #: standalone/drakroam:257 standalone/drakvpn:1061 standalone/drakvpn:1077 #: standalone/drakvpn:1090 #, c-format msgid "on" msgstr "於" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "忽略" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:207 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "欄位的描述資訊：\n" "\n" #: standalone/draksec:168 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (預設：%s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "安全等級:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "安全性管理者:" #: standalone/draksec:219 #, fuzzy, c-format msgid "Basic options" msgstr "DrakSec 基本參數選項" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "網路選項" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "系統選項" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "週期性檢查" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "請稍後, 設定安全等級中..." #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "請稍後, 設定安全選項..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "偵測不到系統有任何音效裝置！" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "目前您的系統偵測不到任何音效卡裝置, 請確認您的音效卡有安插正確。\n" "\n" "\n" "另外請連上我們的官方網站查看資料庫, 檢視您的音效卡是否已經支援：\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/draksound:57 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "請注意, 若是您使用的音效卡是 ISA PnP 類型的話, 您需要使用 sndconfig \n" "這個程式來設定。請在 console 模式輸入執行 \"sndconfig\" 即可。" #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "系統需要安裝上 ImageMagick 套件才能夠進行設定。\n" "請點選 \"確定\" 安裝該套件, 或者是點選 \"取消\" 放棄安裝" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "第一部建立" #: standalone/draksplash:71 #, c-format msgid "final resolution" msgstr " 解析度 " #: standalone/draksplash:72 #, c-format msgid "choose image file" msgstr "選擇映像檔案 " #: standalone/draksplash:73 #, c-format msgid "Theme name" msgstr " 佈景名稱 " #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "瀏覽" #: standalone/draksplash:93 standalone/draksplash:158 #, c-format msgid "Configure bootsplash picture" msgstr "無法建立開機載入畫面御覽" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr " 字元文字方塊的 X 軸坐標 " #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "字元文字方塊的 Y 軸坐標\n" "於數字與字元" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "文字寬度 " #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "文字方塊高度 " #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "它的左上角進度棒\n" "的 x 軸坐標" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr " 左上方進度Bar的 y 軸坐標 " #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr " 進度Bar的寬度 " #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr " 進度Bar的高度 " #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr " 進度Bar的色彩 " #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "御覽" #: standalone/draksplash:121 #, c-format msgid "Save theme" msgstr "儲存佈景" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "選取色彩" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "在 Console 顯示 logo" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "設定開機時不顯示核心訊息資訊" #: standalone/draksplash:161 standalone/draksplash:316 #: standalone/draksplash:460 #, c-format msgid "Notice" msgstr "注意" #: standalone/draksplash:161 standalone/draksplash:316 #, c-format msgid "This theme does not yet have a bootsplash in %s!" msgstr "%s 內尚未有任何開機載入畫面" #: standalone/draksplash:167 #, fuzzy, c-format msgid "choose image" msgstr "選擇映像檔案 " #: standalone/draksplash:217 #, c-format msgid "saving Bootsplash theme..." msgstr "儲存開機載入圖片佈景項目..." #: standalone/draksplash:441 #, c-format msgid "ProgressBar color selection" msgstr "進度巴色彩選擇" #: standalone/draksplash:460 #, c-format msgid "You must choose an image file first!" msgstr "您需要先選擇映像檔案！" #: standalone/draksplash:465 #, c-format msgid "Generating preview..." msgstr "產生御覽圖示中..." #. -PO: First %s is theme name, second %s (in parenthesis) is resolution #: standalone/draksplash:503 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s 開機進度畫面 (%s) 御覽" #. -PO: Do not alter the and tags #: standalone/draksplash:509 #, c-format msgid "" "The image \"%s\" cannot be load due to the following issue:\n" "\n" "%s" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, fuzzy, c-format msgid "Add an UPS device" msgstr "新增項目" #: standalone/drakups:83 #, fuzzy, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "歡迎來到郵件設定工具。\n" "\n" "在這裡, 您能夠設定您的警示通知的方式。\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, fuzzy, c-format msgid "Autodetection" msgstr "自動偵測" #: standalone/drakups:101 standalone/harddrake2:236 #, c-format msgid "Detection in progress" msgstr "正在偵測中" #: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "恭喜" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, fuzzy, c-format msgid "No new UPS devices was found" msgstr "找不到印表機！" #: standalone/drakups:128 standalone/drakups:140 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "OKI Windows 印表機設定" #: standalone/drakups:128 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "請測試滑鼠" #: standalone/drakups:129 #, fuzzy, c-format msgid "Manufacturer / Model:" msgstr "印表機廠商,型號" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "名稱:" #: standalone/drakups:145 #, fuzzy, c-format msgid "The name of your ups" msgstr "裝置的廠商名稱" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "連接埠：" #: standalone/drakups:149 #, fuzzy, c-format msgid "The port on which is connected your ups" msgstr "請選取您滑鼠連接的序列埠。" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:250 #, fuzzy, c-format msgid "UPS devices" msgstr "Server 程式" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:84 standalone/harddrake2:110 #: standalone/harddrake2:117 #, c-format msgid "Name" msgstr "名稱" #: standalone/drakups:269 #, fuzzy, c-format msgid "UPS users" msgstr "使用者" #: standalone/drakups:285 #, fuzzy, c-format msgid "Access Control Lists" msgstr "存取網路工具" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "規則" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "行動" #: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81 #, c-format msgid "Level" msgstr "難度" #: standalone/drakups:299 #, fuzzy, c-format msgid "ACL name" msgstr "LVM 名稱？" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "歡迎使用 UPS 設定工具" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "VPN 連線已經啟用。" #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "VPN 連線已經設定完成。\n" "\n" "目前是啟用的狀態。\n" "\n" "您打算要做什麼呢？" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "正在關閉 VPN..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "VPN 連線現在關閉了。" #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "VPN 連線目前是關閉的狀態" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "VPN 連線已經設定完成。\n" "\n" "目前是關閉的狀態。\n" "\n" "您打算要做什麼呢？" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "正在啟用 VPN..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "VPN 連線現在啟用了。" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "簡單的 VPN 設定。" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "核心模組。" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:292 #, c-format msgid "Security Policies" msgstr "安全性政策：" #: standalone/drakvpn:292 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:295 standalone/drakvpn:306 #, c-format msgid "Configuration file" msgstr "組態設定檔" #: standalone/drakvpn:296 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:307 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:325 standalone/drakvpn:685 #, fuzzy, c-format msgid "%s entries" msgstr ", 第 %s 磁區" #: standalone/drakvpn:326 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "顯示" #: standalone/drakvpn:333 standalone/drakvpn:694 #, fuzzy, c-format msgid "Commit" msgstr "緊密模式" #: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 #: standalone/drakvpn:713 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "顯示設定組態" #: standalone/drakvpn:352 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:368 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:369 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "config setup" msgstr "重新設定" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "conn %default" msgstr "預設" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "normal conn" msgstr "一般模式" #: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510 #, fuzzy, c-format msgid "Exists!" msgstr "離開" #: standalone/drakvpn:383 standalone/drakvpn:424 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:400 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:405 #, fuzzy, c-format msgid "interfaces" msgstr "介面" #: standalone/drakvpn:406 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:407 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:408 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:409 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:410 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:444 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:451 #, fuzzy, c-format msgid "PFS" msgstr "HFS" #: standalone/drakvpn:452 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:453 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:454 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "left" msgstr "[左]" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:458 standalone/drakvpn:497 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:459 standalone/drakvpn:498 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:491 #, fuzzy, c-format msgid "section name" msgstr "連線名稱" #: standalone/drakvpn:492 #, fuzzy, c-format msgid "authby" msgstr "路徑" #: standalone/drakvpn:493 #, c-format msgid "auto" msgstr "自動" #: standalone/drakvpn:499 #, c-format msgid "right" msgstr "[右]" #: standalone/drakvpn:500 #, fuzzy, c-format msgid "rightcert" msgstr "較高" #: standalone/drakvpn:501 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:502 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:503 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:511 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:543 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:576 standalone/drakvpn:826 #, fuzzy, c-format msgid "Edit section" msgstr "路徑選擇" #: standalone/drakvpn:577 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 #: standalone/drakvpn:877 #, fuzzy, c-format msgid "Section names" msgstr "連線名稱" #: standalone/drakvpn:590 #, fuzzy, c-format msgid "Can not edit!" msgstr "無法找到 %s (位於 %s)" #: standalone/drakvpn:591 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:600 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:611 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:624 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:645 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:656 standalone/drakvpn:873 #, fuzzy, c-format msgid "Remove section" msgstr "移除清單" #: standalone/drakvpn:657 standalone/drakvpn:874 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:686 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:728 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "path" msgstr "路徑" #: standalone/drakvpn:735 #, c-format msgid "remote" msgstr "遠端" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "sainfo" msgstr "資訊" #: standalone/drakvpn:743 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:746 #, fuzzy, c-format msgid "path type" msgstr "改變分割區格式" #: standalone/drakvpn:750 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:770 standalone/drakvpn:863 #, fuzzy, c-format msgid "real file" msgstr "選擇檔案" #: standalone/drakvpn:793 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:810 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:827 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:838 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:847 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:855 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:862 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:903 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:923 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:924 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:941 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Europe 通訊協定" #: standalone/drakvpn:942 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:956 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:957 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:974 #, fuzzy, c-format msgid "Sainfo destination protocol" msgstr "Windows 整合工具" #: standalone/drakvpn:975 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:991 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:996 #, fuzzy, c-format msgid "Lifetime number" msgstr "一個數字" #: standalone/drakvpn:997 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1015 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1033 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "認證方式" #: standalone/drakvpn:1035 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1036 #, fuzzy, c-format msgid "deflate" msgstr "預設" #: standalone/drakvpn:1043 #, c-format msgid "Remote" msgstr "遠端" #: standalone/drakvpn:1044 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1052 #, fuzzy, c-format msgid "Exchange mode" msgstr "撥接的模式" #: standalone/drakvpn:1054 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1060 #, fuzzy, c-format msgid "Generate policy" msgstr "安全性" #: standalone/drakvpn:1062 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1076 #, fuzzy, c-format msgid "Passive" msgstr "路徑選擇" #: standalone/drakvpn:1078 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1081 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1083 #, fuzzy, c-format msgid "My certfile" msgstr "選擇檔案" #: standalone/drakvpn:1084 #, fuzzy, c-format msgid "Name of the certificate" msgstr "印表機名稱" #: standalone/drakvpn:1085 #, c-format msgid "My private key" msgstr "我的私鑰" #: standalone/drakvpn:1086 #, c-format msgid "Name of the private key" msgstr "私鑰名稱" #: standalone/drakvpn:1087 #, fuzzy, c-format msgid "Peers certfile" msgstr "選擇檔案" #: standalone/drakvpn:1088 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1089 #, fuzzy, c-format msgid "Verify cert" msgstr "極好的" #: standalone/drakvpn:1091 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1093 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1094 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1114 #, fuzzy, c-format msgid "Peers identifier" msgstr "印表機" #: standalone/drakvpn:1115 #, fuzzy, c-format msgid "Proposal" msgstr "通訊協定" #: standalone/drakvpn:1117 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "DH group" msgstr "群組" #: standalone/drakvpn:1133 #, c-format msgid "Command" msgstr "指令" #: standalone/drakvpn:1134 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1135 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1136 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Europe 通訊協定" #: standalone/drakvpn:1136 standalone/drakvpn:1143 #, fuzzy, c-format msgid "any" msgstr "天" #: standalone/drakvpn:1138 #, c-format msgid "Flag" msgstr "旗幟" #: standalone/drakvpn:1139 #, c-format msgid "Direction" msgstr "方向" #: standalone/drakvpn:1140 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "ipsec" msgstr "Msec 安全設定偵測" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "discard" msgstr "關閉" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "tunnel" msgstr "取消" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "transport" msgstr "測試連接埠" #: standalone/drakvpn:1145 #, fuzzy, c-format msgid "Source/destination" msgstr "工作站平台" #: standalone/drakvpn:1146 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1146 #, c-format msgid "default" msgstr "預設" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "use" msgstr "滑鼠" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "unique" msgstr "Martinique" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "美國 (boradcast)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "美國 (cable)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "美國 (cable-hrc)" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "加拿大 (cable)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "日本 (broascast)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "日本 (cable)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "中國 (broadcast)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "西歐" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "東歐" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "法國 [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "丹麥" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "阿根廷 Optus cable TV" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "TV norm:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "區域：" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "準備開始掃描電視頻道" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "正在掃描電視頻道" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "掃描電視時頻道發生錯誤" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "祝您有個美好的一天！" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "現在，您可以在 X 環境下執行 xawtv 程式了！\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "系統偵測不到任何電視卡！" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "目前您的系統偵測不到任何電視卡, 請確認您的電視卡有安插正確。\n" "\n" "\n" "另外請連上我們的官方網站查看資料庫, 檢視您的電視卡是否已經支援：\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/harddrake2:24 #, c-format msgid "Alternative drivers" msgstr "另外可供選擇的驅動程式" #: standalone/harddrake2:25 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "可供您的音效卡額外可選擇的驅動程式清單" #: standalone/harddrake2:28 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "該裝置目前安插上了多少個實體 bug 裝置 (比方：PCI、USB 等等...)" #: standalone/harddrake2:30 standalone/harddrake2:145 #, c-format msgid "Bus identification" msgstr "匯流排描述" #: standalone/harddrake2:31 #, fuzzy, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- PCI 與 USB 裝置：這列出了廠商名稱, 裝置名稱與附屬廠商等 PCI/USB IDS 資訊" #: standalone/harddrake2:34 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- PCI 裝置 ：包含 PCI 插曹, 介面卡裝置的功能\n" "- EIDE 裝置：包含 Master 或者是 Slave 裝置項目\n" "- SCSI 裝置：包含 SCSI 匯流排裝置與 SCSI 裝置的 IDS" #: standalone/harddrake2:37 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:37 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:38 #, fuzzy, c-format msgid "this field describes the device" msgstr "該裝置的欄位描述" #: standalone/harddrake2:39 #, c-format msgid "Old device file" msgstr "舊的裝置檔案" #: standalone/harddrake2:40 #, c-format msgid "old static device name used in dev package" msgstr "dev 套件內所使用的舊有裝置名稱" #: standalone/harddrake2:41 #, c-format msgid "New devfs device" msgstr "新的 devfs 裝置" #: standalone/harddrake2:42 #, fuzzy, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "由何新的 devfs 提供產生的動態新裝置名稱" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:45 #, c-format msgid "Module" msgstr "型號" #: standalone/harddrake2:45 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "負責處理此裝置的 GNU/Linux 核心模組" #: standalone/harddrake2:46 #, c-format msgid "Extended partitions" msgstr "延伸分割區" #: standalone/harddrake2:46 #, c-format msgid "the number of extended partitions" msgstr "延伸分割區的數目" #: standalone/harddrake2:47 #, c-format msgid "Geometry" msgstr "幾何" #: standalone/harddrake2:47 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "Disk controller" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:49 #, c-format msgid "class of hardware device" msgstr "硬體裝置類別" #: standalone/harddrake2:50 standalone/harddrake2:82 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "型號" #: standalone/harddrake2:50 #, c-format msgid "hard disk model" msgstr "硬碟型號" #: standalone/harddrake2:51 #, c-format msgid "network printer port" msgstr "網路印表機連接埠" #: standalone/harddrake2:52 #, c-format msgid "Primary partitions" msgstr "主分割區" #: standalone/harddrake2:52 #, c-format msgid "the number of the primary partitions" msgstr "主分割區的數目" #: standalone/harddrake2:53 #, c-format msgid "the vendor name of the device" msgstr "裝置的廠商名稱" #: standalone/harddrake2:54 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:54 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "安裝該裝置的 PCI 匯流排" #: standalone/harddrake2:55 #, c-format msgid "PCI device #" msgstr "PCI 裝置編號" #: standalone/harddrake2:55 #, c-format msgid "PCI device number" msgstr "PCI 裝置的編號" #: standalone/harddrake2:56 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "PCI function number" msgstr "連線名稱" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "Vendor ID" msgstr "廠商" #: standalone/harddrake2:57 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:58 #, fuzzy, c-format msgid "Device ID" msgstr "裝置： " #: standalone/harddrake2:58 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "裝置的廠商名稱" #: standalone/harddrake2:59 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:59 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "Sub device ID" msgstr "Server 程式" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "裝置的廠商名稱" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "Device USB ID" msgstr "裝置： " #: standalone/harddrake2:61 #, c-format msgid ".." msgstr ".." #: standalone/harddrake2:65 #, c-format msgid "Bogomips" msgstr "" #: standalone/harddrake2:65 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Cache size" msgstr "快取大小" #: standalone/harddrake2:66 #, c-format msgid "size of the (second level) cpu cache" msgstr "CPU 的第二層快取記憶體大小" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:69 #, c-format msgid "Coma bug" msgstr "" #: standalone/harddrake2:69 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "Cpuid family" msgstr "CPU 家族" #: standalone/harddrake2:70 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "CPU 的家族 (例如：6 表示 i686 等級)" #: standalone/harddrake2:71 #, fuzzy, c-format msgid "Cpuid level" msgstr "安全等級" #: standalone/harddrake2:71 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:72 #, c-format msgid "Frequency (MHz)" msgstr "頻率 (MHz)" #: standalone/harddrake2:72 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "CPU 的工作頻率，以 MHz 為單位 (百萬赫茲，一般而言近似於 CPU 每秒能夠處理的指" "令數)" #: standalone/harddrake2:73 #, c-format msgid "Flags" msgstr "旗標" #: standalone/harddrake2:73 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "Fdiv bug" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "F00f bug" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:80 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:82 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "Model name" msgstr "模組名稱" #: standalone/harddrake2:83 #, c-format msgid "official vendor name of the cpu" msgstr "官方的 CPU 名稱" #: standalone/harddrake2:84 #, c-format msgid "the name of the CPU" msgstr "CPU 的名稱" #: standalone/harddrake2:85 #, c-format msgid "Processor ID" msgstr "處理器 ID" #: standalone/harddrake2:85 #, c-format msgid "the number of the processor" msgstr "處理器的編號" #: standalone/harddrake2:86 #, c-format msgid "Model stepping" msgstr "模型步" #: standalone/harddrake2:86 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:87 #, c-format msgid "the vendor name of the processor" msgstr "處理器的廠商名稱" #: standalone/harddrake2:88 #, c-format msgid "Write protection" msgstr "寫入保護" #: standalone/harddrake2:88 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:92 #, c-format msgid "Floppy format" msgstr "軟碟格式" #: standalone/harddrake2:92 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:96 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI 通道" #: standalone/harddrake2:97 #, fuzzy, c-format msgid "Disk identifier" msgstr "印表機" #: standalone/harddrake2:97 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:98 #, fuzzy, c-format msgid "Logical unit number" msgstr "本機密碼檔" #: standalone/harddrake2:98 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:105 #, c-format msgid "Installed size" msgstr "已安裝的大小" #: standalone/harddrake2:105 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:106 #, fuzzy, c-format msgid "Enabled Size" msgstr "開啟" #: standalone/harddrake2:106 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:107 #, fuzzy, c-format msgid "type of the memory device" msgstr "裝置的廠商名稱" #: standalone/harddrake2:108 #, c-format msgid "Speed" msgstr "速度" #: standalone/harddrake2:108 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:109 #, fuzzy, c-format msgid "Bank connections" msgstr "Cable 連線" #: standalone/harddrake2:110 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:114 #, c-format msgid "Device file" msgstr "裝置檔案" #: standalone/harddrake2:114 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "這隻滑鼠用來與核心驅動程式溝通的裝置檔案" #: standalone/harddrake2:115 #, c-format msgid "Emulated wheel" msgstr "模擬滾輪" #: standalone/harddrake2:115 #, c-format msgid "whether the wheel is emulated or not" msgstr "是否模擬滾輪" #: standalone/harddrake2:116 #, c-format msgid "the type of the mouse" msgstr "滑鼠的樣式" #: standalone/harddrake2:117 #, c-format msgid "the name of the mouse" msgstr "滑鼠名稱" #: standalone/harddrake2:118 #, c-format msgid "Number of buttons" msgstr "按鍵數" #: standalone/harddrake2:118 #, c-format msgid "the number of buttons the mouse has" msgstr "滑鼠所擁有的按鍵數" #: standalone/harddrake2:119 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "請選取您滑鼠連接的序列埠。" #: standalone/harddrake2:120 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:120 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:127 standalone/harddrake2:136 #: standalone/harddrake2:143 standalone/harddrake2:151 #: standalone/harddrake2:321 #, c-format msgid "Identification" msgstr "辨別身份" #: standalone/harddrake2:128 standalone/harddrake2:144 #, c-format msgid "Connection" msgstr "連線" #: standalone/harddrake2:137 #, fuzzy, c-format msgid "Performances" msgstr "偏好" #: standalone/harddrake2:138 #, fuzzy, c-format msgid "Bugs" msgstr "匯流排" #: standalone/harddrake2:139 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:147 #, c-format msgid "Partitions" msgstr "磁碟分割區" #: standalone/harddrake2:152 #, c-format msgid "Features" msgstr "功能" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:175 standalone/logdrake:77 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/選項 (_O)" #: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/說明 (_H)" #: standalone/harddrake2:180 #, c-format msgid "/Autodetect _printers" msgstr "/自動偵測印表機 (_P)" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _modems" msgstr "/自動偵測數據機 (_M)" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _jaz drives" msgstr "/自動偵測 Jaz 裝置 (_J)" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:190 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:191 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/結束 (_Q)" #: standalone/harddrake2:204 #, c-format msgid "/_Fields description" msgstr "/欄位的描述資訊 (_F)" #: standalone/harddrake2:206 #, c-format msgid "Harddrake help" msgstr "Harddrake 說明" #: standalone/harddrake2:215 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: standalone/harddrake2:221 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/報告錯誤 (_R)" #: standalone/harddrake2:223 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/關於 (_A)" #: standalone/harddrake2:224 #, c-format msgid "About Harddrake" msgstr "關於 Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:226 #, fuzzy, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "這是 HardDrake 程式, Mandrakelinux 所發展的硬體檢視設定工具。\n" "版本： %s\n" "作者: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: standalone/harddrake2:243 #, fuzzy, c-format msgid "Harddrake2" msgstr "HardDrake 硬體偵測設定" #: standalone/harddrake2:258 #, c-format msgid "Detected hardware" msgstr "已偵測到的硬體" #: standalone/harddrake2:263 #, c-format msgid "Configure module" msgstr "設定模組" #: standalone/harddrake2:270 #, c-format msgid "Run config tool" msgstr "執行設定程式" #: standalone/harddrake2:308 standalone/net_monitor:108 #: standalone/net_monitor:109 standalone/net_monitor:114 #, c-format msgid "unknown" msgstr "不詳" #: standalone/harddrake2:309 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "未知的" #: standalone/harddrake2:329 #, c-format msgid "Misc" msgstr "其它" #: standalone/harddrake2:344 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: standalone/harddrake2:396 #, c-format msgid "secondary" msgstr "" #: standalone/harddrake2:396 #, c-format msgid "primary" msgstr "" #: standalone/harddrake2:400 #, c-format msgid "burner" msgstr "燒錄器" #: standalone/harddrake2:400 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:546 standalone/harddrake2:549 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:551 #, c-format msgid "Account:" msgstr "帳號：" #: standalone/harddrake2:552 #, c-format msgid "Password:" msgstr "密碼：" #: standalone/harddrake2:553 #, c-format msgid "Hostname:" msgstr "主機名稱：" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "請選取鍵盤排列的格式是那一種。" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "您希望 BackSpace 後退鍵能夠在 console 下回應 Delete 按鍵的功能嗎？" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:67 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "變更已經完成，不過您需要重新登入才能夠生效" #: standalone/logdrake:50 #, c-format msgid "Mandrakelinux Tools Logs" msgstr "Mandrake 工具紀錄" #: standalone/logdrake:51 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:64 #, c-format msgid "Show only for the selected day" msgstr "僅顯示所選取日期" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/檔案 (F)/新增 (_N)" #: standalone/logdrake:71 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/檔案 (F)/開啟 (_O)" #: standalone/logdrake:72 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "/檔案 (F)/儲存 (_S)" #: standalone/logdrake:73 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/檔案 (F)/另存新檔 (_A)" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/檔案 (F)/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/選項 (O)/測試" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/說明 (H)/關於 (_A)" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:116 #, c-format msgid "search" msgstr "尋找" #: standalone/logdrake:128 #, c-format msgid "A tool to monitor your logs" msgstr "監察記錄檔的工具" #: standalone/logdrake:129 standalone/net_monitor:99 #, c-format msgid "Settings" msgstr "設定" #: standalone/logdrake:134 #, c-format msgid "Matching" msgstr "相配的" #: standalone/logdrake:135 #, c-format msgid "but not matching" msgstr "但是不相配" #: standalone/logdrake:139 #, c-format msgid "Choose file" msgstr "選取檔案" #: standalone/logdrake:148 #, c-format msgid "Calendar" msgstr "行事曆" #: standalone/logdrake:158 #, c-format msgid "Content of the file" msgstr "檔案內容" #: standalone/logdrake:162 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "郵件警示" #: standalone/logdrake:169 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "警示精靈無預警的結束：" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "請稍候，正在解析檔案：%s" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache WWW 伺服器" #: standalone/logdrake:377 #, c-format msgid "Domain Name Resolver" msgstr "網域名稱解析器" #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "FTP 伺服器" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Postfix 郵件伺服器" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Samba 伺服器" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Webmin 服務" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Xinetd 服務" #: standalone/logdrake:394 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "設定郵件警示系統" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "停止郵件警示系統" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "郵件警示通知組態設定" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "歡迎來到郵件設定工具。\n" "\n" "在這裡, 您能夠設定您的警示通知的方式。\n" #: standalone/logdrake:406 #, c-format msgid "What do you want to do?" msgstr "您想要做什麼？" #: standalone/logdrake:413 #, c-format msgid "Services settings" msgstr "服務設定" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "若是您所選取的服務項目沒有執行的話，您將會收到警示通知" #: standalone/logdrake:421 #, c-format msgid "Load setting" msgstr "載入設定" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "當系統負載超過此數值時，您將會收到警示通知" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:428 #, fuzzy, c-format msgid "Alert configuration" msgstr "警示設定" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "請於下方輸入你的 e-mail" #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "另存新檔..." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "請選取滑鼠的形式。" #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "模擬三鍵式滑鼠？" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "滑鼠測試" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "請測試您的滑鼠：" #: standalone/net_applet:45 #, c-format msgid "Network is up on interface %s" msgstr "網路已經由介面 %s 啟動" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:53 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "網路介面 %s 是關閉的。請點選 \"設定網路\"" #: standalone/net_applet:68 standalone/net_monitor:474 #, c-format msgid "Connect %s" msgstr "連線到 %s" #: standalone/net_applet:69 standalone/net_monitor:474 #, c-format msgid "Disconnect %s" msgstr "中斷與 %s 的連線" #: standalone/net_applet:70 #, c-format msgid "Monitor Network" msgstr "監控網路" #: standalone/net_applet:71 #, c-format msgid "Configure Network" msgstr "設定網路" #: standalone/net_applet:73 #, fuzzy, c-format msgid "Watched interface" msgstr "介面" #: standalone/net_applet:82 #, c-format msgid "Profiles" msgstr ")定檔案" #: standalone/net_applet:91 #, c-format msgid "Get Online Help" msgstr "取得線上說明" #: standalone/net_applet:223 #, fuzzy, c-format msgid "Interactive intrusion detection" msgstr "印表機自動偵測" #: standalone/net_applet:227 #, c-format msgid "Always launch on startup" msgstr "總是在啟動時執行" #: standalone/net_applet:280 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "%s 試圖發動通訊埠掃描攻擊未遂。" #: standalone/net_applet:281 #, c-format msgid "The %s service has been attacked by %s." msgstr "%s 服務被 %s 攻擊。" #: standalone/net_applet:282 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "%s 試圖發動密碼破解攻擊未遂。" #: standalone/net_applet:290 #, fuzzy, c-format msgid "Active Firewall: intrusion detected" msgstr "防火牆設定已經偵測到了!" #: standalone/net_applet:301 #, c-format msgid "Do you want to blacklist the attacker?" msgstr "您要將攻擊者列入黑名單嗎？" #: standalone/net_applet:315 #, c-format msgid "Always blacklist (do not ask again)" msgstr "總是自動列入黑名單 (不要再問)" #: standalone/net_applet:318 #, c-format msgid "Attack details" msgstr "詳細的攻擊資訊" #: standalone/net_applet:322 #, c-format msgid "Attack time: %s" msgstr "攻擊時間： %s" #: standalone/net_applet:323 #, c-format msgid "Network interface: %s" msgstr "網路介面： %s" #: standalone/net_applet:324 #, c-format msgid "Attack type: %s" msgstr "攻擊型態： %s" #: standalone/net_applet:325 #, c-format msgid "Protocol: %s" msgstr "通訊協定： %s" #: standalone/net_applet:326 #, c-format msgid "Attacker IP address: %s" msgstr "攻擊者 IP 位址： %s" #: standalone/net_applet:327 #, c-format msgid "Attacker hostname: %s" msgstr "攻擊者主機名稱： %s" #: standalone/net_applet:328 #, c-format msgid "Service attacked: %s" msgstr "被攻擊的服務： %s" #: standalone/net_applet:329 #, c-format msgid "Port attacked: %s" msgstr "被攻擊的連接埠： %s" #: standalone/net_applet:330 #, c-format msgid "Type of ICMP attack: %s" msgstr "ICMP 的攻擊型態： %s" #: standalone/net_monitor:61 standalone/net_monitor:66 #, c-format msgid "Network Monitoring" msgstr "網路監控" #: standalone/net_monitor:104 #, c-format msgid "Global statistics" msgstr "" #: standalone/net_monitor:107 #, c-format msgid "Instantaneous" msgstr "瞬間" #: standalone/net_monitor:107 #, c-format msgid "Average" msgstr "平均" #: standalone/net_monitor:108 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "上傳\n" "速度：" #: standalone/net_monitor:109 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "下載\n" "速度：" #: standalone/net_monitor:113 #, c-format msgid "" "Connection\n" "time: " msgstr "" "連線\n" "時間： " #: standalone/net_monitor:120 #, c-format msgid "Use same scale for received and transmitted" msgstr "對接收與傳送使用相同的度量" #: standalone/net_monitor:139 #, c-format msgid "Wait please, testing your connection..." msgstr "請稍候，正在測試您的連線..." #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Disconnecting from Internet " msgstr "正在中斷與網際網路的連線" #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Connecting to Internet " msgstr "連線到網際網路" #: standalone/net_monitor:232 #, c-format msgid "Disconnection from Internet failed." msgstr "中斷與網際網路的連線失敗。" #: standalone/net_monitor:233 #, c-format msgid "Disconnection from Internet complete." msgstr "成功的中斷與網際網路的連線。" #: standalone/net_monitor:235 #, c-format msgid "Connection complete." msgstr "連線完成。" #: standalone/net_monitor:236 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrakelinux Control Center." msgstr "" "連線失敗。\n" "請檢查您在 Mandrakelinux 控制中心的設定。" #: standalone/net_monitor:341 #, c-format msgid "Color configuration" msgstr "顏色設定" #: standalone/net_monitor:389 standalone/net_monitor:409 #, c-format msgid "sent: " msgstr "傳送：" #: standalone/net_monitor:396 standalone/net_monitor:413 #, c-format msgid "received: " msgstr "接收：" #: standalone/net_monitor:403 #, c-format msgid "average" msgstr "平均" #: standalone/net_monitor:406 #, fuzzy, c-format msgid "Local measure" msgstr "LocaleDrake" #: standalone/net_monitor:467 #, fuzzy, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "警告，偵測到您系統上有其他的網路連線，也許正在使用您的網路服務" #: standalone/net_monitor:478 #, c-format msgid "No internet connection configured" msgstr "沒有設定好的網路連線設定" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "正在讀取已安裝的印表機的資料..." #: standalone/printerdrake:116 #, c-format msgid "%s Printer Management Tool" msgstr "%s 印表機管理工具" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/動作 (_A)" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/新增印表機 (_A)" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/指定為預設印表機 (_D)" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/編輯 (_E)" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/刪除 (_D)" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/專家模式 (_E)" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/更新 (_R)" #: standalone/printerdrake:146 #, c-format msgid "/_Configure CUPS" msgstr "/設定 _CUPS" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "搜尋：" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "套用過濾器" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "預設" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "印表機名稱" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "連線類型" #: standalone/printerdrake:218 #, c-format msgid "Server Name" msgstr "伺服器名稱" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, c-format msgid "Add Printer" msgstr "新增" #: standalone/printerdrake:226 #, c-format msgid "Add a new printer to the system" msgstr "新增一台印表機到系統" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "設為預設" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "使用這台印表機為預設印表機" #: standalone/printerdrake:232 #, c-format msgid "Edit selected printer" msgstr "編輯選取的印表機" #: standalone/printerdrake:235 #, c-format msgid "Delete selected printer" msgstr "刪除選取的印表機" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "更新列表" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS" msgstr "設定 CUPS" #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS printing system" msgstr "設定 CUPS 列印系統" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "使用" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "不使用" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "作者：" #. -PO: here %s is the version number #: standalone/printerdrake:570 #, c-format msgid "Printer Management %s" msgstr "列印機管理 %s" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "要使用掃描器需要安裝套件 SANE。\n" "\n" "您要安裝它嗎？" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "略過 Scannerdrake。" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "無法安裝使用 Scannerdrake 設定掃描器所需的套件。" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdrake 將不會啟動。" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "正在尋找已經設定好的掃描器..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "正在尋找新的掃描器..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "重新產生設定好的掃描器的列單..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "%s 不被這個版本的 %s 所支援。" #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "找到了在 %2$s 上的 %1$s，要自動設定它嗎？" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "在掃描器資料庫內找不到此型號 - %s，您要手動設定嗎？" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "選取掃描器型號" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "偵測到的型號： %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "連接埠： %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr " (不支援)" #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "%s 不被 Linux 所支援。" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "不要安裝韌體檔" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "您的 %s 可能每次啟動時都需要下載它的韌體檔。" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "如果是這種情況，您可以自動的完成這個工作。" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "您可以在隨著您掃描器附上的光碟或磁片、廠商的網頁、或者是您的 Windows 磁區上找" "到這個檔案。" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "安裝韌體檔，由" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "選擇韌體案" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "韌體檔 %s 不存在或者無法讀取！" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "這可能是因為您的掃描器每次啟動時都需要下載它的韌體檔。" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, fuzzy, c-format msgid "Install firmware for the" msgstr "安裝" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "選取 %s 的韌體檔" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "無法安裝 %s 的韌體檔！" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "%s 的韌體檔安裝成功。" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "不支援 %s" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "自動偵測印表機 (_P)" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(注意：平行埠無法自動偵測)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "選取裝置" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "正在尋找掃描器..." #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "正在設定核心模組..." #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "注意！" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "編輯設定檔 /etc/sane.d/%s.conf。" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "下列掃描器\n" "\n" "%s\n" "可以在您的系統上使用。\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "下列掃描器\n" "\n" "%s\n" "可以在您的系統上使用。\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "沒有找到可以在您系統上使用的掃描器。\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "搜尋新的掃描器" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "手動加入掃描器" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "安裝/更新韌體" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "掃描器分享" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "所有的遠端機器" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "本機" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "本機的掃描器可以被其他的電腦使用" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "分享掃描器給主機：" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "使用遠端電腦上的掃描器" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "使用掃描器於主機：" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "本地端掃描器分享" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "新增主機" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "編輯選擇的主機" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "移除選取的主機" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "主機的名稱/IP 位址：" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "請輸入主機名稱或是 IP\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, fuzzy, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "這個主機/網路已經存在於列表中，無法重複新增\n" #: standalone/scannerdrake:782 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "使用未用到的空間" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, fuzzy, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "這個 %s 套件需要安裝上, 您要安裝該套件嗎？" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, fuzzy, c-format msgid "Your scanner(s) will not be available on the network." msgstr "您的掃描器將只供擁有管理者權限的使用者使用。" #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "位於 \"%s\" 的硬體類別項目已經移除：\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "" #: standalone/service_harddrake:108 #, fuzzy, c-format msgid "Some devices were added: %s\n" msgstr "滑鼠裝置: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "" #: standalone/service_harddrake:204 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "正在偵測中" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, fuzzy, c-format msgid "Do you want to run the appropriate config tool?" msgstr "您想要測試設定值嗎?" #: steps.pm:14 #, c-format msgid "Language" msgstr "語言" #: steps.pm:15 #, c-format msgid "License" msgstr "授權" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "設定滑鼠" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "硬碟偵測" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "選擇安裝類別" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "選取鍵盤形式" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "分隔區" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "硬碟格式化" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "選取程式套件" #: steps.pm:24 #, c-format msgid "Install system" msgstr "安裝系統" #: steps.pm:25 #, fuzzy, c-format msgid "Administrator password" msgstr "設定 root 密碼" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "新增使用者" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "設定網路連線" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "安裝開機程式" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "設定 X 環境" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "設定系統服務" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "安裝升級" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "離開安裝程式" #: ugtk2.pm:909 #, c-format msgid "Is this correct?" msgstr "這樣子正確嗎？" #: ugtk2.pm:969 #, c-format msgid "No file chosen" msgstr "" #: ugtk2.pm:971 #, c-format msgid "You have chosen a file, not a directory" msgstr "" #: ugtk2.pm:973 #, c-format msgid "You have chosen a directory, not a file" msgstr "" #: ugtk2.pm:975 #, c-format msgid "No such directory" msgstr "" #: ugtk2.pm:975 #, fuzzy, c-format msgid "No such file" msgstr "本地端檔案" #: ugtk2.pm:1056 #, c-format msgid "Expand Tree" msgstr "展開樹狀結構" #: ugtk2.pm:1057 #, c-format msgid "Collapse Tree" msgstr "縮疊樹狀結構" #: ugtk2.pm:1058 #, c-format msgid "Toggle between flat and group sorted" msgstr "切換是否依照群組來加以排序" #: wizards.pm:95 wizards2.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s 沒有安裝\n" "要安裝點選 \"Next 下一步\" 或 \"Cancel 取消\" 離開" #: wizards.pm:99 wizards2.pm:99 #, c-format msgid "Installation failed" msgstr "安裝失敗" #~ msgid "No floppy drive available" #~ msgstr "沒有可用的軟碟機" #~ msgid "Please insert the Update Modules floppy in drive %s" #~ msgstr "請在 %s 磁碟機內插入更新模組軟片" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "南斯拉夫 (拉丁)" #~ msgid "No network card" #~ msgstr "無網路卡" #~ msgid "" #~ "The following protocols can be used to configure an ethernet connection. " #~ "Please choose the one you want to use" #~ msgstr "下列的通訊協定可以用來設定區域網路連線。請選擇您要使用的協定" #~ msgid "Use already installed driver (%s)" #~ msgstr "使用已經安裝的驅動程式 (%s)" #~ msgid "Use Wi-Fi Protected Access (WPA)" #~ msgstr "使用 Wi-Fi Protected Access (WPA)" #, fuzzy #~ msgid "You've not selected any font" #~ msgstr "找不到任何字型。\n" >16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380 20381 20382 20383 20384 20385 20386 20387 20388 20389 20390 20391 20392 20393 20394 20395 20396 20397 20398 20399 20400 20401 20402 20403 20404 20405 20406 20407 20408 20409 20410 20411 20412 20413 20414 20415 20416 20417 20418 20419 20420 20421 20422 20423 20424 20425 20426 20427 20428 20429 20430 20431 20432 20433 20434 20435 20436 20437 20438 20439 20440 20441 20442 20443 20444 20445 20446 20447 20448 20449 20450 20451 20452 20453 20454 20455 20456 20457 20458 20459 20460 20461 20462 20463 20464 20465 20466 20467 20468 20469 20470 20471 20472 20473 20474 20475 20476 20477 20478 20479 20480 20481 20482 20483 20484 20485 20486 20487 20488 20489 20490 20491 20492 20493 20494 20495 20496 20497 20498 20499 20500 20501 20502 20503 20504 20505 20506 20507 20508 20509 20510 20511 20512 20513 20514 20515 20516 20517 20518 20519 20520 20521 20522 20523 20524 20525 20526 20527 20528 20529 20530 20531 20532 20533 20534 20535 20536 20537 20538 20539 20540 20541 20542 20543 20544 20545 20546 20547 20548 20549 20550 20551 20552 20553 20554 20555 20556 20557 20558 20559 20560 20561 20562 20563 20564 20565 20566 20567 20568 20569 20570 20571 20572 20573 20574 20575 20576 20577 20578 20579 20580 20581 20582 20583 20584 20585 20586 20587 20588 20589 20590 20591 20592 20593 20594 20595 20596 20597 20598 20599 20600 20601 20602 20603 20604 20605 20606 20607 20608 20609 20610 20611 20612 20613 20614 20615 20616 20617 20618 20619 20620 20621 20622 20623 20624 20625 20626 20627 20628 20629 20630 20631 20632 20633 20634 20635 20636 20637 20638 20639 20640 20641 20642 20643 20644 20645 20646 20647 20648 20649 20650 20651 20652 20653 20654 20655 20656 20657 20658 20659 20660 20661 20662 20663 20664 20665 20666 20667 20668 20669 20670 20671 20672 20673 20674 20675 20676 20677 20678 20679 20680 20681 20682 20683 20684 20685 20686 20687 20688 20689 20690 20691 20692 20693 20694 20695 20696 20697 20698 20699 20700 20701 20702 20703 20704 20705 20706 20707 20708 20709 20710 20711 20712 20713 20714 20715 20716 20717 20718 20719 20720 20721 20722 20723 20724 20725 20726 20727 20728 20729 20730 20731 20732 20733 20734 20735 20736 20737 20738 20739 20740 20741 20742 20743 20744 20745 20746 20747 20748 20749 20750 20751 20752 20753 20754 20755 20756 20757 20758 20759 20760 20761 20762 20763 20764 20765 20766 20767 20768 20769 20770 20771 20772 20773 20774 20775 20776 20777 20778 20779 20780 20781 20782 20783 20784 20785 20786 20787 20788 20789 20790 20791 20792 20793 20794 20795 20796 20797 20798 20799 20800 20801 20802 20803 20804 20805 20806 20807 20808 20809 20810 20811 20812 20813 20814 20815 20816 20817 20818 20819 20820 20821 20822 20823 20824 20825 20826 20827 20828 20829 20830 20831 20832 20833 20834 20835 20836 20837 20838 20839 20840 20841 20842 20843 20844 20845 20846 20847 20848 20849 20850 20851 20852 20853 20854 20855 20856 20857 20858 20859 20860 20861 20862 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877 20878 20879 20880 20881 20882 20883 20884 20885 20886 20887 20888 20889 20890 20891 20892 20893 20894 20895 20896 20897 20898 20899 20900 20901 20902 20903 20904 20905 20906 20907 20908 20909 20910 20911 20912 20913 20914 20915 20916 20917 20918 20919 20920 20921 20922 20923 20924 20925 20926 20927 20928 20929 20930 20931 20932 20933 20934 20935 20936 20937 20938 20939 20940 20941 20942 20943 20944 20945 20946 20947 20948 20949 20950 20951 20952 20953 20954 20955 20956 20957 20958 20959 20960 20961 20962 20963 20964 20965 20966 20967 20968 20969 20970 20971 20972 20973 20974 20975 20976 20977 20978 20979 20980 20981 20982 20983 20984 20985 20986 20987 20988 20989 20990 20991 20992 20993 20994 20995 20996 20997 20998 20999 21000 21001 21002 21003 21004 21005 21006 21007 21008 21009 21010 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21032 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21043 21044 21045 21046 21047 21048 21049 21050 21051 21052 21053 21054 21055 21056 21057 21058 21059 21060 21061 21062 21063 21064 21065 21066 21067 21068 21069 21070 21071 21072 21073 21074 21075 21076 21077 21078 21079 21080 21081 21082 21083 21084 21085 21086 21087 21088 21089 21090 21091 21092 21093 21094 21095 21096 21097 21098 21099 21100 21101 21102 21103 21104 21105 21106 21107 21108 21109 21110 21111 21112 21113 21114 21115 21116 21117 21118 21119 21120 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 21131 21132 21133 21134 21135 21136 21137 21138 21139 21140 21141 21142 21143 21144 21145 21146 21147 21148 21149 21150 21151 21152 21153 21154 21155 21156 21157 21158 21159 21160 21161 21162 21163 21164 21165 21166 21167 21168 21169 21170 21171 21172 21173 21174 21175 21176 21177 21178 21179 21180 21181 21182 21183 21184 21185 21186 21187 21188 21189 21190 21191 21192 21193 21194 21195 21196 21197 21198 21199 21200 21201 21202 21203 21204 21205 21206 21207 21208 21209 21210 21211 21212 21213 21214 21215 21216 21217 21218 21219 21220 21221 21222 21223 21224 21225 21226 21227 21228 21229 21230 21231 21232 21233 21234 21235 21236 21237 21238 21239 21240 21241 21242 21243 21244 21245 21246 21247 21248 21249 21250 21251 21252 21253 21254 21255 21256 21257 21258 21259 21260 21261 21262 21263 21264 21265 21266 21267 21268 21269 21270 21271 21272 21273 21274 21275 21276 21277 21278 21279 21280 21281 21282 21283 21284 21285 21286 21287 21288 21289 21290 21291 21292 21293 21294 21295 21296 21297 21298 21299 21300 21301 21302 21303 21304 21305 21306 21307 21308 21309 21310 21311 21312 21313 21314 21315 21316 21317 21318 21319 21320 21321 21322 21323 21324 21325 21326 21327 21328 21329 21330 21331 21332 21333 21334 21335 21336 21337 21338 21339 21340 21341 21342 21343 21344 21345 21346 21347 21348 21349 21350 21351 21352 21353 21354 21355 21356 21357 21358 21359 21360 21361 21362 21363 21364 21365 21366 21367 21368 21369 21370 21371 21372 21373 21374 21375 21376 21377 21378 21379 21380 21381 21382 21383 21384 21385 21386 21387 21388 21389 21390 21391 21392 21393 21394 21395 21396 21397 21398 21399 21400 21401 21402 21403 21404 21405 21406 21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417 21418 21419 21420 21421 21422 21423 21424 21425 21426 21427 21428 21429 21430 21431 21432 21433 21434 21435 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21449 21450 21451 21452 21453 21454 21455 21456 21457 21458 21459 21460 21461 21462 21463 21464 21465 21466 21467 21468 21469 21470 21471 21472 21473 21474 21475 21476 21477 21478 21479 21480 21481 21482 21483 21484 21485 21486 21487 21488 21489 21490 21491 21492 21493 21494 21495 21496 21497 21498 21499 21500 21501 21502 21503 21504 21505 21506 21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517 21518 21519 21520 21521 21522 21523 21524 21525 21526 21527 21528 21529 21530 21531 21532 21533 21534 21535 21536 21537 21538 21539 21540 21541 21542 21543 21544 21545 21546 21547 21548 21549 21550 21551 21552 21553 21554 21555 21556 21557 21558 21559 21560 21561 21562 21563 21564 21565 21566 21567 21568 21569 21570 21571 21572 21573 21574 21575 21576 21577 21578 21579 21580 21581 21582 21583 21584 21585 21586 21587 21588 21589 21590 21591 21592 21593 21594 21595 21596 21597 21598 21599 21600 21601 21602 21603 21604 21605 21606 21607 21608 21609 21610 21611 21612 21613 21614 21615 21616 21617 21618 21619 21620 21621 21622 21623 21624 21625 21626 21627 21628 21629 21630 21631 21632 21633 21634 21635 21636 21637 21638 21639 21640 21641 21642 21643 21644 21645 21646 21647 21648 21649 21650 21651 21652 21653 21654 21655 21656 21657 21658 21659 21660 21661 21662 21663 21664 21665 21666 21667 21668 21669 21670 21671 21672 21673 21674 21675 21676 21677 21678 21679 21680 21681 21682 21683 21684 21685 21686 21687 21688 21689 21690 21691 21692 21693 21694 21695 21696 21697 21698 21699 21700 21701 21702 21703 21704 21705 21706 21707 21708 21709 21710 21711 21712 21713 21714 21715 21716 21717 21718 21719 21720 21721 21722 21723 21724 21725 21726 21727 21728 21729 21730 21731 21732 21733 21734 21735 21736 21737 21738 21739 21740 21741 21742 21743 21744 21745 21746 21747 21748 21749 21750 21751 21752 21753 21754 21755 21756 21757 21758 21759 21760 21761 21762 21763 21764 21765 21766 21767 21768 21769 21770 21771 21772 21773 21774 21775 21776 21777 21778 21779 21780 21781 21782 21783 21784 21785 21786 21787 21788 21789 21790 21791 21792 21793 21794 21795 21796 21797 21798 21799 21800 21801 21802 21803 21804 21805 21806 21807 21808 21809 21810 21811 21812 21813 21814 21815 21816 21817 21818 21819 21820 21821 21822 21823 21824 21825 21826 21827 21828 21829 21830 21831 21832 21833 21834 21835 21836 21837 21838 21839 21840 21841 21842 21843 21844 21845 21846 21847 21848 21849 21850 21851 21852 21853 21854 21855 21856 21857 21858 21859 21860 21861 21862 21863 21864 21865 21866 21867 21868 21869 21870 21871 21872 21873 21874 21875 21876 21877 21878 21879 21880 21881 21882 21883 21884 21885 21886 21887 21888 21889 21890 21891 21892 21893 21894 21895 21896 21897 21898 21899 21900 21901 21902 21903 21904 21905 21906 21907 21908 21909 21910 21911 21912 21913 21914 21915 21916 21917 21918 21919 21920 21921 21922 21923 21924 21925 21926 21927 21928 21929 21930 21931 21932 21933 21934 21935 21936 21937 21938 21939 21940 21941 21942 21943 21944 21945 21946 21947 21948 21949 21950 21951 21952 21953 21954 21955 21956 21957 21958 21959 21960 21961 21962 21963 21964 21965 21966 21967 21968 21969 21970 21971 21972 21973 21974 21975 21976 21977 21978 21979 21980 21981 21982 21983 21984 21985 21986 21987 21988 21989 21990 21991 21992 21993 21994 21995 21996 21997 21998 21999 22000 22001 22002 22003 22004 22005 22006 22007 22008 22009 22010 22011 22012 22013 22014 22015 22016 22017 22018 22019 22020 22021 22022 22023 22024 22025 22026 22027 22028 22029 22030 22031 22032 22033 22034 22035 22036 22037 22038 22039 22040 22041 22042 22043 22044 22045 22046 22047 22048 22049 22050 22051 22052 22053 22054 22055 22056 22057 22058 22059 22060 22061 22062 22063 22064 22065 22066 22067 22068 22069 22070 22071 22072 22073 22074 22075 22076 22077 22078 22079 22080 22081 22082 22083 22084 22085 22086 22087 22088 22089 22090 22091 22092 22093 22094 22095 22096 22097 22098 22099 22100 22101 22102 22103 22104 22105 22106 22107 22108 22109 22110 22111 22112 22113 22114 22115 22116 22117 22118 22119 22120 22121 22122 22123 22124 22125 22126 22127 22128 22129 22130 22131 22132 22133 22134 22135 22136 22137 22138 22139 22140 22141 22142 22143 22144 22145 22146 22147 22148 22149 22150 22151 22152 22153 22154 22155 22156 22157 22158 22159 22160 22161 22162 22163 22164 22165 22166 22167 22168 22169 22170 22171 22172 22173 22174 22175 22176 22177 22178 22179 22180 22181 22182 22183 22184 22185 22186 22187 22188 22189 22190 22191 22192 22193 22194 22195 22196 22197 22198 22199 22200 22201 22202 22203 22204 22205 22206 22207 22208 22209 22210 22211 22212 22213 22214 22215 22216 22217 22218 22219 22220 22221 22222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22234 22235 22236 22237 22238 22239 22240 22241 22242 22243 22244 22245 22246 22247 22248 22249 22250 22251 22252 22253 22254 22255 22256 22257 22258 22259 22260 22261 22262 22263 22264 22265 22266 22267 22268 22269 22270 22271 22272 22273 22274 22275 22276 22277 22278 22279 22280 22281 22282 22283 22284 22285 22286 22287 22288 22289 22290 22291 22292 22293 22294 22295 22296 22297 22298 22299 22300 22301 22302 22303 22304 22305 22306 22307 22308 22309 22310 22311 22312 22313 22314 22315 22316 22317 22318 22319 22320 22321 22322 22323 22324 22325 22326 22327 22328 22329 22330 22331 22332 22333 22334 22335 22336 22337 22338 22339 22340 22341 22342 22343 22344 22345 22346 22347 22348 22349 22350 22351 22352 22353 22354 22355 22356 22357 22358 22359 22360 22361 22362 22363 22364 22365 22366 22367 22368 22369 22370 22371 22372 22373 22374 22375 22376 22377 22378 22379 22380 22381 22382 22383 22384 22385 22386 22387 22388 22389 22390 22391 22392 22393 22394 22395 22396 22397 22398 22399 22400 22401 22402 22403 22404 22405 22406 22407 22408 22409 22410 22411 22412 22413 22414 22415 22416 22417 22418 22419 22420 22421 22422 22423 22424 22425 22426 22427 22428 22429 22430 22431 22432 22433 22434 22435 22436 22437 22438 22439 22440 22441 22442 22443 22444 22445 22446 22447 22448 22449 22450 22451 22452 22453 22454 22455 22456 22457 22458 22459 22460 22461 22462 22463 22464 22465 22466 22467 22468 22469 22470 22471 22472 22473 22474 22475 22476 22477 22478 22479 22480 22481 22482 22483 22484 22485 22486 22487 22488 22489 22490 22491 22492 22493 22494 22495 22496 22497 22498 22499 22500 22501 22502 22503 22504 22505 22506 22507 22508 22509 22510 22511 22512 22513 22514 22515 22516 22517 22518 22519 22520 22521 22522 22523 22524 22525 22526 22527 22528 22529 22530 22531 22532 22533 22534 22535 22536 22537 22538 22539 22540 22541 22542 22543 22544 22545 22546 22547 22548 22549 22550 22551 22552 22553 22554 22555 22556 22557 22558 22559 22560 22561 22562 22563 22564 22565 22566 22567 22568 22569 22570 22571 22572 22573 22574 22575 22576 22577 22578 22579 22580 22581 22582 22583 22584 22585 22586 22587 22588 22589 22590 22591 22592 22593 22594 22595 22596 22597 22598 22599 22600 22601 22602 22603 22604 22605 22606 22607 22608 22609 22610 22611 22612 22613 22614 22615 22616 22617 22618 22619 22620 22621 22622 22623 22624 22625 22626 22627 22628 22629 22630 22631 22632 22633 22634 22635 22636 22637 22638 22639 22640 22641 22642 22643 22644 22645 22646 22647 22648 22649 22650 22651 22652 22653 22654 22655 22656 22657 22658 22659 22660 22661 22662 22663 22664 22665 22666 22667 22668 22669 22670 22671 22672 22673 22674 22675 22676 22677 22678 22679 22680 22681 22682 22683 22684 22685 22686 22687 22688 22689 22690 22691 22692 22693 22694 22695 22696 22697 22698 22699 22700 22701 22702 22703 22704 22705 22706 22707 22708 22709 22710 22711 22712 22713 22714 22715 22716 22717 22718 22719 22720 22721 22722 22723 22724 22725 22726 22727 22728 22729 22730 22731 22732 22733 22734 22735 22736 22737 22738 22739 22740 22741 22742 22743 22744 22745 22746 22747 22748 22749 22750 22751 22752 22753 22754 22755 22756 22757 22758 22759 22760 22761 22762 22763 22764 22765 22766 22767 22768 22769 22770 22771 22772 22773 22774 22775 22776 22777 22778 22779 22780 22781 22782 22783 22784 22785 22786 22787 22788 22789 22790 22791 22792 22793 22794 22795 22796 22797 22798 22799 22800 22801 22802 22803 22804 22805 22806 22807 22808 22809 22810 22811 22812 22813 22814 22815 22816 22817 22818 22819 22820 22821 22822 22823 22824 22825 22826 22827 22828 22829 22830 22831 22832 22833 22834 22835 22836 22837 22838 22839 22840 22841 22842 22843 22844 22845 22846 22847 22848 22849 22850 22851 22852 22853 22854 22855 22856 22857 22858 22859 22860 22861 22862 22863 22864 22865 22866 22867 22868 22869 22870 22871 22872 22873 22874 22875 22876 22877 22878 22879 22880 22881 22882 22883 22884 22885 22886 22887 22888 22889 22890 22891 22892 22893 22894 22895 22896 22897 22898 22899 22900 22901 22902 22903 22904 22905 22906 22907 22908 22909 22910 22911 22912 22913 22914 22915 22916 22917 22918 22919 22920 22921 22922 22923 22924 22925 22926 22927 22928 22929 22930 22931 22932 22933 22934 22935 22936 22937 22938 22939 22940 22941 22942 22943 22944 22945 22946 22947 22948 22949 22950 22951 22952 22953 22954 22955 22956 22957 22958 22959 22960 22961 22962 22963 22964 22965 22966 22967 22968 22969 22970 22971 22972 22973 22974 22975 22976 22977 22978 22979 22980 22981 22982 22983 22984 22985 22986 22987 22988 22989 22990 22991 22992 22993 22994 22995 22996 22997 22998 22999 23000 23001 23002 23003 23004 23005 23006 23007 23008 23009 23010 23011 23012 23013 23014 23015 23016 23017 23018 23019 23020 23021 23022 23023 23024 23025 23026 23027 23028 23029 23030 23031 23032 23033 23034 23035 23036 23037 23038 23039 23040 23041 23042 23043 23044 23045 23046 23047 23048 23049 23050 23051 23052 23053 23054 23055 23056 23057 23058 23059 23060 23061 23062 23063 23064 23065 23066 23067 23068 23069 23070 23071 23072 23073 23074 23075 23076 23077 23078 23079 23080 23081 23082 23083 23084 23085 23086 23087 23088 23089 23090 23091 23092 23093 23094 23095 23096 23097 23098 23099 23100 23101 23102 23103 23104 23105 23106 23107 23108 23109 23110 23111 23112 23113 23114 23115 23116 23117 23118 23119 23120 23121 23122 23123 23124 23125 23126 23127 23128 23129 23130 23131 23132 23133 23134 23135 23136 23137 23138 23139 23140 23141 23142 23143 23144 23145 23146 23147 23148 23149 23150 23151 23152 23153 23154 23155 23156 23157 23158 23159 23160 23161 23162 23163 23164 23165 23166 23167 23168 23169 23170 23171 23172 23173 23174 23175 23176 23177 23178 23179 23180 23181 23182 23183 23184 23185 23186 23187 23188 23189 23190 23191 23192 23193 23194 23195 23196 23197 23198 23199 23200 23201 23202 23203 23204 23205 23206 23207 23208 23209 23210 23211 23212 23213 23214 23215 23216 23217 23218 23219 23220 23221 23222 23223 23224 23225 23226 23227 23228 23229 23230 23231 23232 23233 23234 23235 23236 23237 23238 23239 23240 23241 23242 23243 23244 23245 23246 23247 23248 23249 23250 23251 23252 23253 23254 23255 23256 23257 23258 23259 23260 23261 23262 23263 23264 23265 23266 23267 23268 23269 23270 23271 23272 23273 23274 23275 23276 23277 23278 23279 23280 23281 23282 23283 23284 23285 23286 23287 23288 23289 23290 23291 23292 23293 23294 23295 23296 23297 23298 23299 23300 23301 23302 23303 23304 23305 23306 23307 23308 23309 23310 23311 23312 23313 23314 23315 23316 23317 23318 23319 23320 23321 23322 23323 23324 23325 23326 23327 23328 23329 23330 23331 23332 23333 23334 23335 23336 23337 23338 23339 23340 23341 23342 23343 23344 23345 23346 23347 23348 23349 23350 23351 23352 23353 23354 23355 23356 23357 23358 23359 23360 23361 23362 23363 23364 23365 23366 23367 23368 23369 23370 23371 23372 23373 23374 23375 23376 23377 23378 23379 23380 23381 23382 23383 23384 23385 23386 23387 23388 23389 23390 23391 23392 23393 23394 23395 23396 23397 23398 23399 23400 23401 23402 23403 23404 23405 23406 23407 23408 23409 23410 23411 23412 23413 23414 23415 23416 23417 23418 23419 23420 23421 23422 23423 23424 23425 23426 23427 23428 23429 23430 23431 23432 23433 23434 23435 23436 23437 23438 23439 23440 23441 23442 23443 23444 23445 23446 23447 23448 23449 23450 23451 23452 23453 23454 23455 23456 23457 23458 23459 23460 23461 23462 23463 23464 23465 23466 23467 23468 23469 23470 23471 23472 23473 23474 23475 23476 23477 23478 23479 23480 23481 23482 23483 23484 23485 23486 23487 23488 23489 23490 23491 23492 23493 23494 23495 23496 23497 23498 23499 23500 23501 23502 23503 23504 23505 23506 23507 23508 23509 23510 23511 23512 23513 23514 23515 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23531 23532 23533 23534 23535 23536 23537 23538 23539 23540 23541 23542 23543 23544 23545 23546 23547 23548 23549 23550 23551 23552 23553 23554 23555 23556 23557 23558 23559 23560 23561 23562 23563 23564 23565 23566 23567 23568 23569 23570 23571 23572 23573 23574 23575 23576 23577 23578 23579 23580 23581 23582 23583 23584 23585 23586 23587 23588 23589 23590 23591 23592 23593 23594 23595 23596 23597 23598 23599 23600 23601 23602 23603 23604 23605 23606 23607 23608 23609 23610 23611 23612 23613 23614 23615 23616 23617 23618 23619 23620 23621 23622 23623 23624 23625 23626 23627 23628 23629 23630 23631 23632 23633 23634 23635 23636 23637 23638 23639 23640 23641 23642 23643 23644 23645 23646 23647 23648 23649 23650 23651 23652 23653 23654 23655 23656 23657 23658 23659 23660 23661 23662 23663 23664 23665 23666 23667 23668 23669 23670 23671 23672 23673 23674 23675 23676 23677 23678 23679 23680 23681 23682 23683 23684 23685 23686 23687 23688 23689 23690 23691 23692 23693 23694 23695 23696 23697 23698 23699 23700 23701 23702 23703 23704 23705 23706 23707 23708 23709 23710 23711 23712 23713 23714 23715 23716 23717 23718 23719 23720 23721 23722 23723 23724 23725 23726 23727 23728 23729 23730 23731 23732 23733 23734 23735 23736 23737 23738 23739 23740 23741 23742 23743 23744 23745 23746 23747 23748 23749 23750 23751 23752 23753 23754 23755 23756 23757 23758 23759 23760 23761 23762 23763 23764 23765 23766 23767 23768 23769 23770 23771 23772 23773 23774 23775 23776 23777 23778 23779 23780 23781 23782 23783 23784 23785 23786 23787 23788 23789 23790 23791 23792 23793 23794 23795 23796 23797 23798 23799 23800 23801 23802 23803 23804 23805 23806 23807 23808 23809 23810 23811 23812 23813 23814 23815 23816 23817 23818 23819 23820 23821 23822 23823 23824 23825 23826 23827 23828 23829 23830 23831 23832 23833 23834 23835 23836 23837 23838 23839 23840 23841 23842 23843 23844 23845 23846 23847 23848 23849 23850 23851 23852 23853 23854 23855 23856 23857 23858 23859 23860 23861 23862 23863 23864 23865 23866 23867 23868 23869 23870 23871 23872 23873 23874 23875 23876 23877 23878 23879 23880 23881 23882 23883 23884 23885 23886 23887 23888 23889 23890 23891 23892 23893 23894 23895 23896 23897 23898 23899 23900 23901 23902 23903 23904 23905 23906 23907 23908 23909 23910 23911 23912 23913 23914 23915 23916 23917 23918 23919 23920 23921 23922 23923 23924 23925 23926 23927 23928 23929 23930 23931 23932 23933 23934 23935 23936 23937 23938 23939 23940 23941 23942 23943 23944 23945 23946 23947 23948 23949 23950 23951 23952 23953 23954 23955 23956 23957 23958 23959 23960 23961 23962 23963 23964 23965 23966 23967 23968 23969 23970 23971 23972 23973 23974 23975 23976 23977 23978 23979 23980 23981 23982 23983 23984 23985 23986 23987 23988 23989 23990 23991 23992 23993 23994 23995 23996 23997 23998 23999 24000 24001 24002 24003 24004 24005 24006 24007 24008 24009 24010 24011 24012 24013 24014 24015 24016 24017 24018 24019 24020 24021 24022 24023 24024 24025 24026 24027 24028 24029 24030 24031 24032 24033 24034 24035 24036 24037 24038 24039 24040 24041 24042 24043 24044 24045 24046 24047 24048 24049 24050 24051 24052 24053 24054 24055 24056 24057 24058 24059 24060 24061 24062 24063 24064 24065 24066 24067 24068 24069 24070 24071 24072 24073 24074 24075 24076 24077 24078 24079 24080 24081 24082 24083 24084 24085 24086 24087 24088 24089 24090 24091 24092 24093 24094 24095 24096 24097 24098 24099 24100 24101 24102 24103 24104 24105 24106 24107 24108 24109 24110 24111 24112 24113 24114 24115 24116 24117 24118 24119 24120 24121 24122 24123 24124 24125 24126 24127 24128 24129 24130 24131 24132 24133 24134 24135 24136 24137 24138 24139 24140 24141 24142 24143 24144 24145 24146 24147 24148 24149 24150 24151 24152 24153 24154 24155 24156 24157 24158 24159 24160 24161 24162 24163 24164 24165 24166 24167 24168 24169 24170 24171 24172 24173 24174 24175 24176 24177 24178 24179 24180 24181 24182 24183 24184 24185 24186 24187 24188 24189 24190 24191 24192 24193 24194 24195 24196 24197 24198 24199 24200 24201 24202 24203 24204 24205 24206 24207 24208 24209 24210 24211 24212 24213 24214 24215 24216 24217 24218 24219 24220 24221 24222 24223 24224 24225 24226 24227 24228 24229 24230 24231 24232 24233 24234 24235 24236 24237 24238 24239 24240 24241 24242 24243 24244 24245 24246 24247 24248 24249 24250 24251 24252 24253 24254 24255 24256 24257 24258 24259 24260 24261 24262 24263 24264 24265 24266 24267 24268 24269 24270 24271 24272 24273 24274 24275 24276 24277 24278 24279 24280 24281 24282 24283 24284 24285 24286 24287 24288 24289 24290 24291 24292 24293 24294 24295 24296 24297 24298 24299 24300 24301 24302 24303 24304 24305 24306 24307 24308 24309 24310 24311 24312 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 24326 24327 24328 24329 24330 24331 24332 24333 24334 24335 24336 24337 24338 24339 24340 24341 24342 24343 24344 24345 24346 24347 24348 24349 24350 24351 24352 24353 24354 24355 24356 24357 24358 24359 24360 24361 24362 24363 24364 24365 24366 24367 24368 24369 24370 24371 24372 24373 24374 24375 24376 24377 24378 24379 24380 24381 24382 24383 24384 24385 24386 24387 24388 24389 24390 24391 24392 24393 24394 24395 24396 24397 24398 24399 24400 24401 24402 24403 24404 24405 24406 24407 24408 24409 24410 24411 24412 24413 24414 24415 24416 24417 24418 24419 24420 24421 24422 24423 24424 24425 24426 24427 24428 24429 24430 24431 24432 24433 24434 24435 24436 24437 24438 24439 24440 24441 24442 24443 24444 24445 24446 24447 24448 24449 24450 24451 24452 24453 24454 24455 24456 24457 24458 24459 24460 24461 24462 24463 24464 24465 24466 24467 24468 24469 24470 24471 24472 24473 24474 24475 24476 24477 24478 24479 24480 24481 24482 24483 24484 24485 24486 24487 24488 24489 24490 24491 24492 24493 24494 24495 24496 24497 24498 24499 24500 24501 24502 24503 24504 24505 24506 24507 24508 24509 24510 24511 24512 24513 24514 24515 24516 24517 24518 24519 24520 24521 24522 24523 24524 24525 24526 24527 24528 24529 24530 24531 24532 24533 24534 24535 24536 24537 24538 24539 24540 24541 24542 24543 24544 24545 24546 24547 24548 24549 24550 24551 24552 24553 24554 24555 24556 24557 24558 24559 24560 24561 24562 24563 24564 24565 24566 24567 24568 24569 24570 24571 24572 24573 24574 24575 24576 24577 24578 24579 24580 24581 24582 24583 24584 24585 24586 24587 24588 24589 24590 24591 24592 24593 24594 24595 24596 24597 24598 24599 24600 24601 24602 24603 24604 24605 24606 24607 24608 24609 24610 24611 24612 24613 24614 24615 24616 24617 24618 24619 24620 24621 24622 24623 24624 24625 24626 24627 24628 24629 24630 24631 24632 24633 24634 24635 24636 24637 24638 24639 24640 24641 24642 24643 24644 24645 24646 24647 24648 24649 24650 24651 24652 24653 24654 24655 24656 24657 24658 24659 24660 24661 24662 24663 24664 24665 24666 24667 24668 24669 24670 24671 24672 24673 24674 24675 24676 24677 24678 24679 24680 24681 24682 24683 24684 24685 24686 24687 24688 24689 24690 24691 24692 24693 24694 24695 24696 24697 24698 24699 24700 24701 24702 24703 24704 24705 24706 24707 24708 24709 24710 24711 24712 24713 24714 24715 24716 24717 24718 24719 24720 24721 24722 24723 24724 24725 24726 24727 24728 24729 24730 24731 24732 24733 24734 24735 24736 24737 24738 24739 24740 24741 24742 24743 24744 24745 24746 24747 24748 24749 24750 24751 24752 24753 24754 24755 24756 24757 24758 24759 24760 24761 24762 24763 24764 24765 24766 24767 24768 24769 24770 24771 24772 24773 24774 24775 24776 24777 24778 24779 24780 24781 24782 24783 24784 24785 24786 24787 24788 24789 24790 24791 24792 24793 24794 24795 24796 24797 24798 24799 24800 24801 24802 24803 24804 24805 24806 24807 24808 24809 24810 24811 24812 24813 24814 24815 24816 24817 24818 24819 24820 24821 24822 24823 24824 24825 24826 24827 24828 24829 24830 24831 24832 24833 24834 24835 24836 24837 24838 24839 24840 24841 24842 24843 24844 24845 24846 24847 24848 24849 24850 24851 24852 24853 24854 24855 24856 24857 24858 24859 24860 24861 24862 24863 24864 24865 24866 24867 24868 24869 24870 24871 24872 24873 24874 24875 24876 24877 24878 24879 24880 24881 24882 24883 24884 24885 24886 24887 24888 24889 24890 24891 24892 24893 24894 24895 24896 24897 24898 24899 24900 24901 24902 24903 24904 24905 24906 24907 24908 24909 24910 24911 24912 24913 24914 24915 24916 24917 24918 24919 24920 24921 24922 24923 24924 24925 24926 24927 24928 24929 24930 24931 24932 24933 24934 24935 24936 24937 24938 24939 24940 24941 24942 24943 24944 24945 24946 24947 24948 24949 24950 24951 24952 24953 24954 24955 24956 24957 24958 24959 24960 24961 24962 24963 24964 24965 24966 24967 24968 24969 24970 24971 24972 24973 24974 24975 24976 24977 24978 24979 24980 24981 24982 24983 24984 24985 24986 24987 24988 24989 24990 24991 24992 24993 24994 24995 24996 24997 24998 24999 25000 25001 25002 25003 25004 25005 25006 25007 25008 25009 25010 25011 25012 25013 25014 25015 25016 25017 25018 25019 25020 25021 25022 25023 25024 25025 25026 25027 25028 25029 25030 25031 25032 25033 25034 25035 25036 25037 25038 25039 25040 25041 25042 25043 25044 25045 25046 25047 25048 25049 25050 25051 25052 25053 25054 25055 25056 25057 25058 25059 25060 25061 25062 25063 25064 25065 25066 25067 25068 25069 25070 25071 25072 25073 25074 25075 25076 25077 25078 25079 25080 25081 25082 25083 25084 25085 25086 25087 25088 25089 25090 25091 25092 25093 25094 25095 25096 25097 25098 25099 25100 25101 25102 25103 25104 25105 25106 25107 25108 25109 25110 25111 25112 25113 25114 25115 25116 25117 25118 25119 25120 25121 25122 25123 25124 25125 25126 25127 25128 25129 25130 25131 25132 25133 25134 25135 25136 25137 25138 25139 25140 25141 25142 25143 25144 25145 25146 25147 25148 25149 25150 25151 25152 25153 25154 25155 25156 25157 25158 25159 25160 25161 25162 25163 25164 25165 25166 25167 25168 25169 25170 25171 25172 25173 25174 25175 25176 25177 25178 25179 25180 25181 25182 25183 25184 25185 25186 25187 25188 25189 25190 25191 25192 25193 25194 25195 25196 25197 25198 25199 25200 25201 25202 25203 25204 25205 25206 25207 25208 25209 25210 25211 25212 25213 25214 25215 25216 25217 25218 25219 25220 25221 25222 25223 25224 25225 25226 25227 25228 25229 25230 25231 25232 25233 25234 25235 25236 25237 25238 25239 25240 25241 25242 25243 25244 25245 25246 25247 25248 25249 25250 25251 25252 25253 25254 25255 25256 25257 25258 25259 25260 25261 25262 25263 25264 25265 25266 25267 25268 25269 25270 25271 25272 25273 25274 25275 25276 25277 25278 25279 25280 25281 25282 25283 25284 25285 25286 25287 25288 25289 25290 25291 25292 25293 25294 25295 25296 25297 25298 25299 25300 25301 25302 25303 25304 25305 25306 25307 25308 25309 25310 25311 25312 25313 25314 25315 25316 25317 25318 25319 25320 25321 25322 25323 25324 25325 25326 25327 25328 25329 25330 25331 25332 25333 25334 25335 25336 25337 25338 25339 25340 25341 25342 25343 25344 25345 25346 25347 25348 25349 25350 25351 25352 25353 25354 25355 25356 25357 25358 25359 25360 25361 25362 25363 25364 25365 25366 25367 25368 25369 25370 25371 25372 25373 25374 25375 25376 25377 25378 25379 25380 25381 25382 25383 25384 25385 25386 25387 25388 25389 25390 25391 25392 25393 25394 25395 25396 25397 25398 25399 25400 25401 25402 25403 25404 25405 25406 25407 25408 25409 25410 25411 25412 25413 25414 25415 25416 25417 25418 25419 25420 25421 25422 25423 25424 25425 25426 25427 25428 25429 25430 25431 25432 25433 25434 25435 25436 25437 25438 25439 25440 25441 25442 25443 25444 25445 25446 25447 25448 25449 25450 25451 25452 25453 25454 25455 25456 25457 25458 25459 25460 25461 25462 25463 25464 25465 25466 25467 25468 25469 25470 25471 25472 25473 25474 25475 25476 25477 25478 25479 25480 25481 25482 25483 25484 25485 25486 25487 25488 25489 25490 25491 25492 25493 25494 25495 25496 25497 25498 25499 25500 25501 25502 25503 25504 25505 25506 25507 25508 25509 25510 25511 25512 25513 25514 25515 25516 25517 25518 25519 25520 25521 25522 25523 25524 25525 25526 25527 25528 25529 25530 25531 25532 25533 25534 25535 25536 25537 25538 25539 25540 25541 25542 25543 25544 25545 25546 25547 25548 25549 25550 25551 25552 25553 25554 25555 25556 25557 25558 25559 25560 25561 25562 25563 25564 25565 25566 25567 25568 25569 25570 25571 25572 25573 25574 25575 25576 25577 25578 25579 25580 25581 25582 25583 25584 25585 25586 25587 25588 25589 25590 25591 25592 25593 25594 25595 25596 25597 25598 25599 25600 25601 25602 25603 25604 25605 25606 25607 25608 25609 25610 25611 25612 25613 25614 25615 25616 25617 25618 25619 25620 25621 25622 25623 25624 25625 25626 25627 25628 25629 25630 25631 25632 25633 25634 25635 25636 25637 25638 25639 25640 25641 25642 25643 25644 25645 25646 25647 25648 25649 25650 25651 25652 25653 25654 25655 25656 25657 25658 25659 25660 25661 25662 25663 25664 25665 25666 25667 25668 25669 25670 25671 25672 25673 25674 25675 25676 25677 25678 25679 25680 25681 25682 25683 25684 25685 25686 25687 25688 25689 25690 25691 25692 25693 25694 25695 25696 25697 25698 25699 25700 25701 25702 25703 25704 25705 25706 25707 25708 25709 25710 25711 25712 25713 25714 25715 25716 25717 25718 25719 25720 25721 25722 25723 25724 25725 25726 25727 25728 25729 25730 25731 25732 25733 25734 25735 25736 25737 25738 25739 25740 25741 25742 25743 25744 25745 25746 25747 25748 25749 25750 25751 25752 25753 25754 25755 25756 25757 25758 25759 25760 25761 25762 25763 25764 25765 25766 25767 25768 25769 25770 25771 25772 25773 25774 25775 25776 25777 25778 25779 25780 25781 25782 25783 25784 25785 25786 25787 25788 25789 25790 25791 25792 25793 25794 25795 25796 25797 25798 25799 25800 25801 25802 25803 25804 25805 25806 25807 25808 25809 25810 25811 25812 25813 25814 25815 25816 25817 25818 25819 25820 25821 25822 25823 25824 25825 25826 25827 25828 25829 25830 25831 25832 25833 25834 25835 25836 25837 25838 25839 25840 25841 25842 25843 25844 25845 25846 25847 25848 25849 25850 25851 25852 25853 25854 25855 25856 25857 25858 25859 25860 25861 25862 25863 25864 25865 25866 25867 25868 25869 25870 25871 25872 25873 25874 25875 25876 25877 25878 25879 25880 25881 25882 25883 25884 25885 25886 25887 25888 25889 25890 25891 25892 25893 25894 25895 25896 25897 25898 25899 25900 25901 25902 25903 25904 25905 25906 25907 25908 25909 25910 25911 25912 25913 25914 25915 25916 25917 25918 25919 25920 25921 25922 25923 25924 25925 25926 25927 25928 25929 25930 25931 25932 25933 25934 25935 25936 25937 25938 25939 25940 25941 25942 25943 25944 25945 25946 25947 25948 25949 25950 25951 25952 25953 25954 25955 25956 25957 25958 25959 25960 25961 25962 25963 25964 25965 25966 25967 25968 25969 25970 25971 25972 25973 25974 25975 25976 25977 25978 25979 25980 25981 25982 25983 25984 25985 25986 25987 25988 25989 25990 25991 25992 25993 25994 25995 25996 25997 25998 25999 26000 26001 26002 26003 26004 26005 26006 26007 26008 26009 26010 26011 26012 26013 26014 26015 26016 26017 26018 26019 26020 26021 26022 26023 26024 26025 26026 26027 26028 26029 26030 26031 26032 26033 26034 26035 26036 26037 26038 26039 26040 26041 26042 26043 26044 26045 26046 26047 26048 26049 26050 26051 26052 26053 26054 26055 26056 26057 26058 26059 26060 26061 26062 26063 26064 26065 26066 26067 26068 26069 26070 26071 26072 26073 26074 26075 26076 26077 26078 26079 26080 26081 26082 26083 26084 26085 26086 26087 26088 26089 26090 26091 26092 26093 26094 26095 26096 26097 26098 26099 26100 26101 26102 26103 26104 26105 26106 26107 26108 26109 26110 26111 26112 26113 26114 26115 26116 26117 26118 26119 26120 26121 26122 26123 26124 26125 26126 26127 26128 26129 26130 26131 26132 26133 26134 26135 26136 26137 26138 26139 26140 26141 26142 26143 26144 26145 26146 26147 26148 26149 26150 26151 26152 26153 26154 26155 26156 26157 26158 26159 26160 26161 26162 26163 26164 26165 26166 26167 26168 26169 26170 26171 26172 26173 26174 26175 26176 26177 26178 26179 26180 26181 26182 26183 26184 26185 26186 26187 26188 26189 26190 26191 26192 26193 26194 26195 26196 26197 26198 26199 26200 26201 26202 26203 26204 26205 26206 26207 26208 26209 26210 26211 26212 26213 26214 26215 26216 26217 26218 26219 26220 26221 26222 26223 26224 26225 26226 26227 26228 26229 26230 26231 26232 26233 26234 26235 26236 26237 26238 26239 26240 26241 26242 26243 26244 26245 26246 26247 26248 26249 26250 26251 26252 26253 26254 26255 26256 26257 26258 26259 26260 26261 26262 26263 26264 26265 26266 26267 26268 26269 26270 26271 26272 26273 26274 26275 26276 26277 26278 26279 26280 26281 26282 26283 26284 26285 26286 26287 26288 26289 26290 26291 26292 26293 26294 26295 26296 26297 26298 26299 26300 26301 26302 26303 26304 26305 26306 26307 26308 26309 26310 26311 26312 26313 26314 26315 26316 26317 26318 26319 26320 26321 26322 26323 26324 26325 26326 26327 26328 26329 26330 26331 26332 26333 26334 26335 26336 26337 26338 26339 26340 26341 26342 26343 26344 26345 26346 26347 26348 26349 26350 26351 26352 26353 26354 26355 26356 26357 26358 26359 26360 26361 26362 26363 26364 26365 26366 26367 26368 26369 26370 26371 26372 26373 26374 26375 26376 26377 26378 26379 26380 26381 26382 26383 26384 26385 26386 26387 26388 26389 26390 26391 26392 26393 26394 26395 26396 26397 26398 26399 26400 26401 26402 26403 26404 26405 26406 26407 26408 26409 26410 26411 26412 26413 26414 26415 26416 26417 26418 26419 26420 26421 26422 26423 26424 26425 26426 26427 26428 26429 26430 26431 26432 26433 26434 26435 26436 26437 26438 26439 26440 26441 26442 26443 26444 26445 26446 26447 26448 26449 26450 26451 26452 26453 26454 26455 26456 26457 26458 26459 26460 26461 26462 26463 26464 26465 26466 26467 26468 26469 26470 26471 26472 26473 26474 26475 26476 26477 26478 26479 26480 26481 26482 26483 26484 26485 26486 26487 26488 26489 26490 26491 26492 26493 26494 26495 26496 26497 26498 26499 26500 26501 26502 26503 26504 26505 26506 26507 26508 26509 26510 26511 26512 26513 26514 26515 26516 26517 26518 26519 26520 26521 26522 26523 26524 26525 26526 26527 26528 26529 26530 26531 26532 26533 26534 26535 26536 26537 26538 26539 26540 26541 26542 26543 26544 26545 26546 26547 26548 26549 26550 26551 26552 26553 26554 26555 26556 26557 26558 26559 26560 26561 26562 26563 26564 26565 26566 26567 26568 26569 26570 26571 26572 26573 26574 26575 26576 26577 26578 26579 26580 26581 26582 26583 26584 26585 26586 26587 26588 26589 26590 26591 26592 26593 26594 26595 26596 26597 26598 26599 26600 26601 26602 26603 26604 26605 26606 26607 26608 26609 26610 26611 26612 26613 26614 26615 26616 26617 26618 26619 26620 26621 26622 26623 26624 26625 26626 26627 26628 26629 26630 26631 26632 26633 26634 26635 26636 26637 26638 26639 26640 26641 26642 26643 26644 26645 26646 26647 26648 26649 26650 26651 26652 26653 26654 26655 26656 26657 26658 26659 26660 26661 26662 26663 26664 26665 26666 26667 26668 26669 26670 26671 26672 26673 26674 26675 26676 26677 26678 26679 26680 26681 26682 26683 26684 26685 26686 26687 26688 26689 26690 26691 26692 26693 26694 26695 26696 26697 26698 26699 26700 26701 26702 26703 26704 26705 26706 26707 26708 26709 26710 26711 26712 26713 26714 26715 26716 26717 26718 26719 26720 26721 26722 26723 26724 26725 26726 26727 26728 26729 26730 26731 26732 26733 26734 26735 26736 26737 26738 26739 26740 26741 26742 26743 26744 26745 26746 26747 26748 26749 26750 26751 26752 26753 26754 26755 26756 26757 26758 26759 26760 26761 26762 26763 26764 26765 26766 26767 26768 26769 26770 26771 26772 26773 26774 26775 26776 26777 26778 26779 26780 26781 26782 26783 26784 26785 26786 26787 26788 26789 26790 26791 26792 26793 26794 26795 26796 26797 26798 26799 26800 26801 26802 26803 26804 26805 26806 26807 26808 26809 26810 26811 26812 26813 26814 26815 26816 26817 26818 26819 26820 26821 26822 26823 26824 26825 26826 26827 26828 26829 26830 26831 26832 26833 26834 26835 26836 26837 26838 26839 26840 26841 26842 26843 26844 26845 26846 26847 26848 26849 26850 26851 26852 26853 26854 26855 26856 26857 26858 26859 26860 26861 26862 26863 26864 26865 26866 26867 26868 26869 26870 26871 26872 26873 26874 26875 26876 26877 26878 26879 26880 26881 26882 26883 26884 26885 26886 26887 26888 26889 26890 26891 26892 26893 26894 26895 26896 26897 26898 26899 26900 26901 26902 26903 26904 26905 26906 26907 26908 26909 26910 26911 26912 26913 26914 26915 26916 26917 26918 26919 26920 26921 26922 26923 26924 26925 26926 26927 26928 26929 26930 26931 26932 26933 26934 26935 26936 26937 26938 26939 26940 26941 26942 26943 26944 26945 26946 26947 26948 26949 26950 26951 26952 26953 26954 26955 26956 26957 26958 26959 26960 26961 26962 26963 26964 26965 26966 26967 26968 26969 26970 26971 26972 26973 26974 26975 26976 26977 26978 26979 26980 26981 26982 26983 26984 26985 26986 26987 26988 26989 26990 26991 26992 26993 26994 26995 26996 26997 26998 26999 27000 27001 27002 27003 27004 27005 27006 27007 27008 27009 27010 27011 27012 27013 27014 27015 27016 27017 27018 27019 27020 27021 27022 27023 27024 27025 27026 27027 27028 27029 27030 27031 27032 27033 27034 27035 27036 27037 27038 27039 27040 27041 27042 27043 27044 27045 27046 27047 27048 27049 27050 27051 27052 27053 27054 27055 27056 27057 27058 27059 27060 27061 27062 27063 27064 27065 27066 27067 27068 27069 27070 27071 27072 27073 27074 27075 27076 27077 27078 27079 27080 27081 27082 27083 27084 27085 27086 27087 27088 27089 27090 27091 27092 27093 27094 27095 27096 27097 27098 27099 27100 27101 27102 27103 27104 27105 27106 27107 27108 27109 27110 27111 27112 27113 27114 27115 27116 27117 27118 27119 27120 27121 27122 27123 27124 27125 27126 27127 27128 27129 27130 27131 27132 27133 27134 27135 27136 27137 27138 27139 27140 27141 27142 27143 27144 27145 27146 27147 27148 27149 27150 27151 27152 27153 27154 27155 27156 27157 27158 27159 27160 27161 27162 27163 27164 27165 27166 27167 27168 27169 27170 27171 27172 27173 27174 27175 27176 27177 27178 27179 27180 27181 27182 27183 27184 27185 27186 27187 27188 27189 27190 27191 27192 27193 27194 27195 27196 27197 27198 27199 27200 27201 27202 27203 27204 27205 27206 27207 27208 27209 27210 27211 27212 27213 27214 27215 27216 27217 27218 27219 27220 27221 27222 27223 27224 27225 27226 27227 27228 27229 27230 27231 27232 27233 27234 27235 27236 27237 27238 27239 27240 27241 27242 27243 27244 27245 27246 27247 27248 27249 27250 27251 27252 27253 27254 27255 27256 27257 27258 27259 27260 27261 27262 27263 27264 27265 27266 27267 27268 27269 27270 27271 27272 27273 27274 27275 27276 27277 27278 27279 27280 27281 27282 27283 27284 27285 27286 27287 27288 27289 27290 27291 27292 27293 27294 27295 27296 27297 27298 27299 27300 27301 27302 27303 27304 27305 27306 27307 27308 27309 27310 27311 27312 27313 27314 27315 27316 27317 27318 27319 27320 27321 27322 27323 27324 27325 27326 27327 27328 27329 27330 27331 27332 27333 27334 27335 27336 27337 27338 27339 27340 27341 27342 27343 27344 27345 27346 27347 27348 27349 27350 27351 27352 27353 27354 27355 27356 27357 27358 27359 27360 27361 27362 27363 27364 27365 27366 27367 27368 27369 27370 27371 27372 27373 27374 27375 27376 27377 27378 27379 27380 27381 27382 27383 27384 27385 27386 27387 27388 27389 27390 27391 27392 27393 27394 27395 27396 27397 27398 27399 27400 27401 27402 27403 27404 27405 27406 27407 27408 27409 27410 27411 27412 27413 27414 27415 27416 27417 27418 27419 27420 27421 27422 27423 27424 27425 27426 27427 27428 27429 27430 27431 27432 27433 27434 27435 27436 27437 27438 27439 27440 27441 27442 27443 27444 27445 27446 27447 27448 27449 27450 27451 27452 27453 27454 27455 27456 27457 27458 27459 27460 27461 27462 27463 27464 27465 27466 27467 27468 27469 27470 27471 27472 27473 27474 27475 27476 27477 27478 27479 27480 27481 27482 27483 27484 27485 27486 27487 27488 27489 27490 27491 27492 27493 27494 27495 27496 27497 27498 27499 27500 27501 27502 27503 27504 27505 27506 27507 27508 27509 27510 27511 27512 27513 27514 27515 27516 27517 27518 27519 27520 27521 27522 27523 27524 27525 27526 27527 27528 27529 27530 27531 27532 27533 27534 27535 27536 27537 27538 27539 27540 27541 27542 27543 27544 27545 27546 27547 27548 27549 27550 27551 27552 27553 27554 27555 27556 27557 27558 27559 27560 27561 27562 27563 27564 27565 27566 27567 27568 27569 27570 27571 27572 27573 27574 27575 27576 27577 27578 27579 27580 27581 27582 27583 27584 27585 27586 27587 27588 27589 27590 27591 27592 27593 27594 27595 27596 27597 27598 27599 27600 27601 27602 27603 27604 27605 27606 27607 27608 27609 27610 27611 27612 27613 27614 27615 27616 27617 27618 27619 27620 27621 27622 27623 27624 27625 27626 27627 27628 27629 27630 27631 27632 27633 27634 27635 27636 27637 27638 27639 27640 27641 27642 27643 27644 27645 27646 27647 27648 27649 27650 27651 27652 27653 27654 27655 27656 27657 27658 27659 27660 27661 27662 27663 27664 27665 27666 27667 27668 27669 27670 27671 27672 27673 27674 27675 27676 27677 27678 27679 27680 27681 27682 27683 27684 27685 27686 27687 27688 27689 27690 27691 27692 27693 27694 27695 27696 27697 27698 27699 27700 27701 27702 27703 27704 27705 27706 27707 27708 27709 27710 27711 27712 27713 27714 27715 27716 27717 27718 27719 27720 27721 27722 27723 27724 27725 27726 27727 27728 27729 27730 27731 27732 27733 27734 27735 27736 27737 27738 27739 27740 27741 27742 27743 27744 27745 27746 27747 27748 27749 27750 27751 27752 27753 27754 27755 27756 27757 27758 27759 27760 27761 27762 27763 27764 27765 27766 27767 27768 27769 27770 27771 27772 27773 27774 27775 27776 27777 27778 27779 27780 27781 27782 27783 27784 27785 27786 27787 27788 27789 27790 27791 27792 27793 27794 27795 27796 27797 27798 27799 27800 27801 27802 27803 27804 27805 27806 27807 27808 27809 27810 27811 27812 27813 27814 27815 27816 27817 27818 27819 27820 27821 27822 27823 27824 27825 27826 27827 27828 27829 27830 27831 27832 27833 27834 27835 27836 27837 27838 27839 27840 27841 27842 27843 27844 27845 27846 27847 27848 27849 27850 27851 27852 27853 27854 27855 27856 27857 27858 27859 27860 27861 27862 27863 27864 27865 27866 27867 27868 27869 27870 27871 27872 27873 27874 27875 27876 27877 27878 27879 27880 27881 27882 27883 27884 27885 27886 27887 27888 27889 27890 27891 27892 27893 27894 27895 27896 27897 27898 27899 27900 27901 27902 27903 27904 27905 27906 27907 27908 27909 27910 27911 27912 27913 27914 27915 27916 27917 27918 27919 27920 27921 27922 27923 27924 27925 27926 27927 27928 27929 27930 27931 27932 27933 27934 27935 27936 27937 27938 27939 27940 27941 27942 27943 27944 27945 27946 27947 27948 27949 27950 27951 27952 27953 27954 27955 27956 27957 27958 27959 27960 27961 27962 27963 27964 27965 27966 27967 27968 27969 27970 27971 27972 27973 27974 27975 27976 27977 27978 27979 27980 27981 27982 27983 27984 27985 27986 27987 27988 27989 27990 27991 27992 27993 27994 27995 27996 27997 27998 27999 28000 28001 28002 28003 28004 28005 28006 28007 28008 28009 28010 28011 28012 28013 28014 28015 28016 28017 28018 28019 28020 28021 28022 28023 28024 28025 28026 28027 28028 28029 28030 28031 28032 28033 28034 28035 28036 28037 28038 28039 28040 28041 28042 28043 28044 28045 28046 28047 28048 28049 28050 28051 28052 28053 28054 28055 28056 28057 28058 28059 28060 28061 28062 28063 28064 28065 28066 28067 28068 28069 28070 28071 28072 28073 28074 28075 28076 28077 28078 28079 28080 28081 28082 28083 28084 28085 28086 28087 28088 28089 28090 28091 28092 28093 28094 28095 28096 28097 28098 28099 28100 28101 28102 28103 28104 28105 28106 28107 28108 28109 28110 28111 28112 28113 28114 28115 28116 28117 28118 28119 28120 28121 28122 28123 28124 28125 28126 28127 28128 28129 28130 28131 28132 28133 28134 28135 28136 28137 28138 28139 28140 28141 28142 28143 28144 28145 28146 28147 28148 28149 28150 28151 28152 28153 28154 28155 28156 28157 28158 28159 28160 28161 28162 28163 28164 28165 28166 28167 28168 28169 28170 28171 28172 28173 28174 28175 28176 28177 28178 28179 28180 28181 28182 28183 28184 28185 28186 28187 28188 28189 28190 28191 28192 28193 28194 28195 28196 28197 28198 28199 28200 28201 28202 28203 28204 28205 28206 28207 28208 28209 28210 28211 28212 28213 28214 28215 28216 28217 28218 28219 28220 28221 28222 28223 28224 28225 28226 28227 28228 28229 28230 28231 28232 28233 28234 28235 28236 28237 28238 28239 28240 28241 28242 28243 28244 28245 28246 28247 28248 28249 28250 28251 28252 28253 28254 28255 28256 28257 28258 28259 28260 28261 28262 28263 28264 28265 28266 28267 28268 28269 28270 28271 28272 28273 28274 28275 28276 28277 28278 28279 28280 28281 28282 28283 28284 28285 28286 28287 28288 28289 28290 28291 28292 28293 28294 28295 28296 28297 28298 28299 28300 28301 28302 28303 28304 28305 28306 28307 28308 28309 28310 28311 28312 28313 28314 28315 28316 28317 28318 28319 28320 28321 28322 28323 28324 28325 28326 28327 28328 28329 28330 28331 28332 28333 28334 28335 28336 28337 28338 28339 28340 28341 28342 28343 28344 28345 28346 28347 28348 28349 28350 28351 28352 28353 28354 28355 28356 28357 28358 28359 28360 28361 28362 28363 28364 28365 28366 28367 28368 
# translation of bs.po to Bosanski
# translation of DrakX-bs.po to Bosanski
# Copyright (C) 2001, 2003, 2004, 2005. Free Software Foundation, Inc.
# Amila Akagić <bono@lugbih.org>, 06. 2001.
# Vedran Ljubovic <vljubovic@smartnet.ba>, 2002, 2003, 2004, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: bs\n"
"POT-Creation-Date: 2005-12-08 21:52+0800\n"
"PO-Revision-Date: 2005-02-26 11:13+0100\n"
"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
"Language-Team: Bosanski <lokal@lugbih.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Koju USB ključ želite formatirati?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Sada ćete formatirati USB uređaj \"%s\". Ovo će obrisati sve podatke na "
"njemu.\n"
"Provjerite da li je navedeni uređaj USB ključ koji želite formatirati.\n"
"Preporučujemo da privremeno iskopčate sve ostale USB uređaje dok radite ovu "
"operaciju."

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Ne mogu pisati na ključ"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Izgleda da je na USB ključu aktivirana zaštita od pisanja. Molim\n"
"isključite ga, uklonite zaštitu i ponovo ga uključite."

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Pokušaj ponovo"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Nastavi bez USB ključa"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Izgleda da je na USB ključu aktivirana zaštita, ali ga sada ne možemo\n"
"bezbjedno isključiti.\n"
"\n"
"\n"
"Kliknite na dugme da restartujete računar, isključite ga, uklonite zašitu\n"
"od pisanja, ponovo utaknite ključ i pokrenite Mandriva Move."

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Reboot"
msgstr "Restartuj"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Vaš USB ključ ne sadrži ispravne Windows (FAT) particije.\n"
"Ova particija nam je potrebna za nastavak (osim toga, FAT particije\n"
"su uobičajene tako da možete premještati svoje datoteke i pristupati\n"
"im sa računara koji rade pod Windowsom). Molim uključite USB\n"
"ključ sa Windows particijom.\n"
"\n"
"\n"
"Takođe možete nastaviti bez USB ključ - još uvijek možete\n"
"koristiti Mandriva Move kao običan Mandriva operativni sistem."

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Nisam pronašao USB ključ na vašem sistemu. Ako\n"
"uključite USB ključ, Mandriva Move će imati mogućnost\n"
"da transparentno čuva vaše podatke u vašem home direktoriju\n"
"kao i konfiguraciju sistema za sljedeće pokretanje sistema na\n"
"ovom ili nekom drugom računaru. Pažnja: ako sada uključite\n"
"ključ, sačekajte nekoliko sekundi do ponovne detekcije.\n"
"\n"
"\n"
"Takođe možete nastaviti bez USB ključa - još uvijek možete\n"
"koristiti Mandriva Move kao običan Mandriva operativni sistem."

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Potreban je ključ da snimite podatke"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Ponovo detektuj USB ključ"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Podešavanje USB ključa"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Molim sačekajte, podešavam sistemske konfiguracione datoteke na USB ključu..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "Unesite vaše korisničke podatke, šifra će se koristiti za screensaver"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Automatska konfiguracija"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Molim sačekajte, otkrivam i podešavam uređaje..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
#: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:838 network/netconnect.pm:867
#: network/netconnect.pm:966 network/netconnect.pm:970
#: network/netconnect.pm:974 network/netconnect.pm:979
#: network/netconnect.pm:1124 network/netconnect.pm:1128
#: network/netconnect.pm:1247 network/netconnect.pm:1252
#: network/netconnect.pm:1272 network/netconnect.pm:1431
#: network/thirdparty.pm:321 network/thirdparty.pm:328
#: network/thirdparty.pm:372 network/thirdparty.pm:374
#: network/thirdparty.pm:395 network/thirdparty.pm:419
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
#: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451
#: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594
#: printer/printerdrake.pm:4714 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1581 standalone/drakTermServ:1589
#: standalone/drakTermServ:1594 standalone/drakTermServ:1602
#: standalone/drakTermServ:1618 standalone/drakTermServ:1638
#: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:66 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Greška"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Došlo je do greške, ali ne znam kako da postupim u vezi toga.\n"
"Nastavite na vlastiti rizik."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Došlo je do greške"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Došlo je do greške:\n"
"\n"
"\n"
"%s\n"
"\n"
"Ovo je možda posljedica korumpiranih sistemskih datoteka\n"
"na USB ključu, u kojem slučaju će njihovo brisanje i restart\n"
"Mandriva Move riješiti problem. Da to uradite, kliknite na\n"
"odgovarajuće dugme.\n"
"\n"
"\n"
"Možete takođe pokušati restartovati i ukloniti USB ključ,\n"
"ili istražiti njegov sadržaj iz nekog drugog OSa, ili čak\n"
"možete pogledati log datteke na konzoli #3 i #4 da\n"
"pokušate otkriti šta se događa."

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Ukloni sistemske konfig datoteke"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Samo restartuj"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Možete nastaviti samo bez CDROM podrške"

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Ubij ove programe"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Nema CDROM podrške"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1061 diskdrake/interactive.pm:1071
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Read carefully!"
msgstr "Pročitajte pažljivo!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Ne možete koristiti drugi CDROM kada su pokrenuti sljedeći programi: \n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Kopiram u memoriju da dozvolim uklanjanje CDROMa"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB ili više"

#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "X server"

#: Xconfig/card.pm:163
#, c-format
msgid "Choose an X server"
msgstr "Izaberite X server"

#: Xconfig/card.pm:195
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head konfiguracija"

#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Vaš sistem podržava konfiguraciju više glava.\n"
"Šta želite učiniti?"

#: Xconfig/card.pm:265
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Ne mogu instalirati Xorg paket: %s"

#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Izaberite veličinu memorije vaše grafičke kartice"

#: Xconfig/card.pm:372
#, c-format
msgid "Xorg configuration"
msgstr "Xorg konfiguracija"

#: Xconfig/card.pm:374
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Koju konfiguraciju Xorg želite imati?"

#: Xconfig/card.pm:407
#, c-format
msgid "Configure all heads independently"
msgstr "Konfiguriši sve glave odvojeno"

#: Xconfig/card.pm:408
#, c-format
msgid "Use Xinerama extension"
msgstr "Koristi Xinerama ekstenziju"

#: Xconfig/card.pm:413
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Podesi samo karticu \"%s\"%s"

#: Xconfig/card.pm:425 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:432 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s sa 3D hardverskim ubrzanjem"

#: Xconfig/card.pm:434
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa Xorg %s."

#: Xconfig/card.pm:440
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"

#: Xconfig/card.pm:442
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa Xorg %s,\n"
"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975
#, c-format
msgid "Custom"
msgstr "Izaberi korisnike"

#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1328
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Izlaz"

#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Grafička karta"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Rezolucija"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Test"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:493
#: standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Opcije"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "Vaša Xorg konfiguraciona datoteka je pokvarena, ignorišem je."

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Zadržati izmjene?\n"
"Trenutna konfiguracija je:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Izaberite monitor za glavu #%d"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Izaberite monitor"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Opšti"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Proizvođač"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovarajući monitor"

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina\n"
"kojom se cijeli ekran osvježava, i brzina horizontalne\n"
"sinhronizacije, što je brzina kojm se prikazuju skan-linije.\n"
"\n"
"VEOMA JE VAŽNO da ne izaberete tip monitora čiji je sinhronizacioni\n"
"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
" Ako niste sigurni, izaberite najmanju opciju."

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Brzina horizontalnog osvježavanja"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Brzina vertikalnog osvježavanja"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 boja (8 bita)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 hiljada boja (15 bita)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 hiljada boja (16 bita)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 miliona boja (24 bita)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Rezolucije"

#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Ostalo"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Izaberite rezoluciju i broj boja"

#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Grafička karta: %s"

#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "U redu"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431
#: install_steps_interactive.pm:836 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Odustani"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Pomoć"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Testiranje konfiguracije"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Želite li testirati konfiguraciju?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Upozorenje: testiranje ove grafičke karte može zalediti računar"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Došlo je do greške:\n"
"%s\n"
"Probajte promijeniti neke parametre"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Napuštam za %d sekundi"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Da li je ovo ispravno?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Raspored tastature: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Vrsta miša: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Uređaj miša: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HorizSync: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertRefresh: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafička karta: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Grafička memorija: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Broj boja: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezolucija: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg drajver: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Grafički interfejs pri pokretanju"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Mogu podesiti vaš računar da automatski pokrene grafički interfejs (Xorg) "
"pri pokretanju računara.\n"
"Želite li da se Xorg automatski pokreće?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Izgleda da vaša grafička kartica ima TV-OUT konektor.\n"
"On se može podesiti da radi koristeći frame-buffer.\n"
"\n"
"Za ovo je potrebno da uključite grafičku karticu u TV prije nego što upalite "
"računar.\n"
"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
"\n"
"Imate li ovu mogućnost?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Koji standard koristi vaš TV?"

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:208
#, c-format
msgid "Please wait"
msgstr "Molim sačekajte"

#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Instalacija bootloadera u toku"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO će sada pridružiti novi Volume ID disku %s. Promjena Volume ID\n"
"na startnom disku za Windows NT, 2000 ili XP sisteme je fatalna\n"
"greška.\n"
"Ovo upozorenje se ne odnosi na Windows 95 ili 98, te na NT diskove sa "
"podacima.\n"
"\n"
"Da li da podesim novi ID volumena?"

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Možda ćete trebati promijeniti vaš Open Firmware boot uređaj\n"
" da biste aktivirali bootloader.  Ako ne vidite upit bootloadera\n"
" prilikom bootanja, držite Command-Option-O-F prilikom boota\n"
" i unesite:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Zatim kucajte: shut-down\n"
"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Odlučili ste da na particiju instalirate bootloader.\n"
"Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate "
"(npr: System Commander).\n"
"\n"
"Sa kojeg diska vršite boot?"

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prvi sektor diska (MBR)"

#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Prvi sektor root particije"

#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "Na disketi"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "Preskoči"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub instalacija"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Gdje želite smjestiti bootloader?"

#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Konfiguracija stila boota"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Glavne opcije bootloadera"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Navedite veličinu rama u MB"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre"

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Šifre se ne poklapaju"

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1335
#, c-format
msgid "Please try again"
msgstr "Molim pokušajte ponovo"

#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader koji ćete koristiti"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Boot uređaj"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Čekanje prije bootanja default image-a"

#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Uključi ACPI"

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr "Prinudi bez APICa"

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr "Prinudi bez Lokalnog APICa"

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Šifra"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Šifra (ponovo)"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "Ograniči opcije komandne linije"

#: any.pm:296
#, c-format
msgid "restrict"
msgstr "ograniči"

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Očisti /tmp prilikom svakog boota"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "Init poruka"

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "Čekanje na Open Firmware"

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Vrijeme za boot kernela"

#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Omogući boot sa CDa?"

#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "Omogući boot sa OFa?"

#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "Podrazumjevani OS?"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "Image"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Append"

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Video mod"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "Mrežni profil"

#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:449
#, c-format
msgid "Label"
msgstr "Oznaka"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Default"

#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Initrd-veličina"

#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Prazna oznaka nije dozvoljena"

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Morate navesti image kernela"

#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Morate navesti root particiju"

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Ova oznaka je već u upotrebi"

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Koju vrstu opcije želite dodati?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Ostali OSi (SunOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Ostali OSi (MacOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Ostali OSi (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Ovo su trenutne opcije u vašem boot meniju.\n"
"Možete dodati nove ili promijeniti postojeće."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "pristup X programima"

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "pristup rpm alatima"

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "dozvoli \"su\""

#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "pristup administrativnim datotekama"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "pristup mrežnim alatima"

#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "pristup alatima za kompajliranje"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(već dodan %s)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Ova šifra je previše jednostavna"

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Molim navedite korisničko ime"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'"

#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "Korisničko ime je predugačko"

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Ovo korisničko ime je već dodano"

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "Korisnički ID"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "Grupni ID"

#: any.pm:625
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "Opcija %s mora biti broj!"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "Dodaj korisnika"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Unesite korisnika\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4987
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Gotovo"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Prihvati korisnika"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Pravo ime"

#: any.pm:649 standalone/drakbackup:1634
#, c-format
msgid "Login name"
msgstr "Korisničko ime"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Shell"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Ikona"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Mogu podesiti vaš računar da automatski prijavi jednog korisnika."

#: any.pm:705
#, fuzzy, c-format
msgid "Use this feature"
msgstr "Da li želite koristiti ovu mogućnost?"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Izaberite default korisnika:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Izaberite window manager koji će se pokretati:"

#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "Molim izaberite jezik koji ćete koristiti."

#: any.pm:720 any.pm:788
#, c-format
msgid "Language choice"
msgstr "Izbor jezika"

#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux podržava više jezika. Izaberite jezike koje\n"
"želite instalirati. Oni će biti dostupni kada se završi vaša\n"
"instalacija i restartujete vaš sistem."

#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr ""

#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Podrazumijeva se Unicode"

#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "Svi jezici"

#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:957
#, c-format
msgid "Country / Region"
msgstr "Zemlja"

#: any.pm:844
#, c-format
msgid "Please choose your country."
msgstr "Molim izaberite vašu zemlju."

#: any.pm:846
#, c-format
msgid "Here is the full list of available countries"
msgstr "Ovdje je puna lista svih dostupnih država"

#: any.pm:847
#, c-format
msgid "Other Countries"
msgstr "Ostale zemlje"

#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Više opcija"

#: any.pm:855
#, c-format
msgid "Input method:"
msgstr "Metod unosa:"

#: any.pm:858 install_any.pm:422 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1238 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "Ništa"

#: any.pm:975
#, c-format
msgid "No sharing"
msgstr "Bez dijeljenja"

#: any.pm:975
#, c-format
msgid "Allow all users"
msgstr "Dozvoli svim korisnicima"

#: any.pm:979
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Želite li dozvoliti korisnicima da dijele (share) neke od njihovih "
"direktorija?\n"
"Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju "
"\"Share\" u\n"
"Konqueroru ili Nautilusu.\n"
"\n"
"\"Izaberi korisnike\" vam omogućuje da podesite ovu opciju zasebno za svakog "
"korisnika.\n"

#: any.pm:991
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: tradicionalni Unix sistem za dijeljenje datoteka, koji ima slabiju "
"podršku na Macintoshu i Windowsu."

#: any.pm:994
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: sistem za dijeljenje datoteka koji koristi Windows, Mac OS X i većina "
"modernih Linux sistema."

#: any.pm:1002
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Možete eksportovati koristeći NFS ili Sambu. Molim izaberite sistem koji "
"želite koristiti."

#: any.pm:1027
#, c-format
msgid "Launch userdrake"
msgstr "Pokreni userdrake"

#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5305 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Zatvori"

#: any.pm:1029
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Dijeljenje na nivou korisnika koristi grupu \"fileshare\". \n"
"Možete dodavati korisnike u ovu grupu pomoću userdrake-a."

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Lokalna datoteka"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Smart Card"

#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "Windows domena"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Active Directory sa SFU"

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Active Directory sa Winbind"

#: authentication.pm:66
#, c-format
msgid "Local file:"
msgstr "Lokalna datoteka:"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"Koristite \"lokalno\" za provjeru identiteta i informacije o korisnicima u "
"lokalnoj datoteci"

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"Govori vašem računaru da koristi LDAP za neke ili sve provjere identiteta. "
"LDAP je sistem koji objedinjuje određene vrste informacija u vašoj "
"organizaciji."

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"Omogućuje vam da pokrećete grupu računara u istoj Network Information "
"Service domeni sa zajedničkim datotekama šifara i grupa."

#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "Windows domena:"

#: authentication.pm:69
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"Winbind omogućuje dobavljanje informacija o korisnicima i provjeru "
"identiteta putem Windows domene."

#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr "Active Directory sa SFU:"

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr ""

#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Active Directory sa Winbind:"

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""

#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "Autentikacijski LDAP"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP Server"

#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "jednostavno"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "sloj sigurnosti (SASL/Kerberos)"

#: authentication.pm:121 authentication.pm:159
#, c-format
msgid "Authentication Active Directory"
msgstr "Provjera identiteta kroz Aktivni imenik (Active Directory)"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domena"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Server"

#: authentication.pm:125
#, c-format
msgid "LDAP users database"
msgstr "LDAP baza korisnika"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr "Koristi anonimni BIND "

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "LDAP korisnik kojem je dozvoljeno pregledanje Aktivnog imenika"

#: authentication.pm:128
#, c-format
msgid "Password for user"
msgstr "Šifra za korisnika"

#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "Provjera identiteta putem NISa"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "NIS domen"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "NIS server"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrši:\n"
" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
"i restartuje server. Takođe će vam trebati korisničko ime i šifra "
"administratora domena da biste pridružili računar Windows(tm) domenu.\n"
"Ako mreža još nije aktivirana, DrakX će pokušati pristupanje domenu tek "
"nakon što prođete kroz korak podešavanja mreže.\n"
"Ako ovo podešavanje iz nekog razloga ne uspije i prijava na domen ne bude "
"izvršena, izvršite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći "
"vašu Windows(tm) domenu, kao i administratorovo korisničko ime i šifru nakon "
"pokretanja sistema.\n"
"Naredba 'wbinfo -t' će provjeriti da li su vaši podaci ispravni."

#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentikacijska Windows domena"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr ""

#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr "Korisničko ime domenskog administratora"

#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr "Administratorska šifra domena"

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"Podesite administratorsku (root) šifru i metode mrežne prijave korisnika"

#: authentication.pm:182
#, c-format
msgid "Set administrator (root) password"
msgstr "Podesite administratorsku (root) šifru"

#: authentication.pm:183 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Authentication method"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "Bez šifre"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"

#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Metod autentikacije"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Ne mogu koristiti broadcast bez NIS domene"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Dobro dosli u izbornik operativnog sistema!\n"
"\n"
"Izaberite operativni sistem na listi iznad ili\n"
"sacekajte da se pokrene podrazumjevani OS.\n"
"\n"

#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO sa grafičkim menijem"

#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr "LILO sa tekstualnim menijem"

#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr ""

#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr ""

#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "nema dovoljno prostora u /boot"

#: bootloader.pm:1480
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Ne možete instalirati bootloader na %s particiju\n"

#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"Konfiguracija vašeg bootloadera mora biti ažurirana pošto su particije "
"renumerisane"

#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Ne mogu ispravno instalirati bootloader. Morate pokrenuti \"rescue\" sistem "
"i izabrati \"%s\""

#: bootloader.pm:1534
#, c-format
msgid "Re-install Boot Loader"
msgstr "Reinstalacija bootloadera"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d minuta"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 minuta"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d sekundi"

#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "nedostaje kdesu"

#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr "nedostaje consolehelper"

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Austrija"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Australija"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Belgija"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brazil"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Kanada"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Švicarska"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Kostarika"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Češka"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Njemačka"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Danska"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estonija"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Španija"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Finska"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Francuska"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grčka"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Mađarska"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irska"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Izrael"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italija"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Japan"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Nizozemska"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Norveška"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Novi Zeland"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Poljska"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugal"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Rusija"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Švedska"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Slovačka"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Tajland"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Tajvan"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Južna Afrika"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "SAD"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV je protokol koji vam omogućuje da direktorij web servera\n"
"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
"je web server podešen kao WebDAV server). Ako želite dodati WebDAV\n"
"tačke montiranja, izaberite \"Novi\"."

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Novi"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:455 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Demontiraj"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:452 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Montiraj"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:678 diskdrake/interactive.pm:697
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Tačka montiranja"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Molim unesite URL WebDAV servera"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL mora počinjati sa http:// ili https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server:"

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:522
#: diskdrake/interactive.pm:1217 diskdrake/interactive.pm:1295
#, c-format
msgid "Mount point: "
msgstr "Tačka montiranja: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1302
#, c-format
msgid "Options: %s"
msgstr "Opcije: %s"

#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292
#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62
#: install_interactive.pm:216 install_interactive.pm:222
#: install_interactive.pm:275 install_interactive.pm:280
#: install_steps_interactive.pm:278 install_steps_interactive.pm:342
#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Particioniranje"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Predlažemo da najprije napravite backup vaših podataka"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora "
"(2048 sektora je dovoljno)\n"
"na početku diska"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Čarobnjak"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Izaberi akciju"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Imate jednu veliku Microsoft Windows particiju.\n"
"Predlažem da najprije promijenite veličinu te particije\n"
"(kliknite na nju, zatim na \"Promijeni veličinu\")"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Kliknite na particiju"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr "Detalji"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Nije pronađen nijedan hard disk"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1232
#, c-format
msgid "Empty"
msgstr "Prazno"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Tipovi file sistema:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Koristi ``%s'' umjesto toga"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:471
#, c-format
msgid "Create"
msgstr "Kreiraj"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:624
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Tip"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:456
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Obriši"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Najprije koristite ``Demontiraj''"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Izaberi drugu particiju"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Izaberi particiju"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Izlaz"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Poništi"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Prebaci u normalni mod"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Prebaci u ekspertni mod"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Svejedno nastavljate?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Izlaz bez spašavanja"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Izlazite bez pisanja tabele particija?"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Želite li spasiti izmjene u /etc/fstab ?"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Trebali biste formatirati particiju %s.\n"
"U suprotnom tačka montiranja %s neće biti zapisana u fstab.\n"
"Da svejedno izađem?"

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Obriši sve"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Auto alokacija"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "Još"

#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Informacije o hard disku"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Sve primarne particije su u upotrebi"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Ne mogu dodati više particija"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Da biste imali još particija, molim pobrišite jednu kako bi se mogla "
"kreirati extended particija"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""

#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Snimi tabelu particija"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Vrati tabelu particija"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Spasi tabelu particija"

#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Ponovo učitaj tabelu particija"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Automatsko montiranje izmjenjivog medija"

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Izaberite datoteku"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Backup tabela particija nema istu veličinu\n"
"Ipak nastavljate?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Pokušavam da spasim tabelu particija"

#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Detaljne informacije"

#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:768
#, c-format
msgid "Resize"
msgstr "Smanji"

#: diskdrake/interactive.pm:451
#, c-format
msgid "Format"
msgstr "Formatiraj"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to RAID"
msgstr "Dodaj na RAID"

#: diskdrake/interactive.pm:454
#, c-format
msgid "Add to LVM"
msgstr "Dodaj na LVM"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from RAID"
msgstr "Ukloni sa RAIDa"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Remove from LVM"
msgstr "Ukloni sa LVMa"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Modify RAID"
msgstr "Modificiraj RAID"

#: diskdrake/interactive.pm:460
#, c-format
msgid "Use for loopback"
msgstr "Koristi za loopback"

#: diskdrake/interactive.pm:515
#, c-format
msgid "Create a new partition"
msgstr "Napravi novu particiju"

#: diskdrake/interactive.pm:518
#, c-format
msgid "Start sector: "
msgstr "Početni sektor: "

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:937
#, c-format
msgid "Size in MB: "
msgstr "Veličina u MB: "

#: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938
#, c-format
msgid "Filesystem type: "
msgstr "Tip datotečnog sistema: "

#: diskdrake/interactive.pm:526
#, c-format
msgid "Preference: "
msgstr "Preference: "

#: diskdrake/interactive.pm:529
#, c-format
msgid "Logical volume name "
msgstr "Naziv logičkog volumena "

#: diskdrake/interactive.pm:559
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Ne možete napraviti novu particiju\n"
"(pošto ste dosegli maksimalan broj primarnih particija).\n"
"Najprije uklonite primarnu particiju i napravite extended (proširenu) "
"particiju."

#: diskdrake/interactive.pm:589
#, c-format
msgid "Remove the loopback file?"
msgstr "Ukloniti loopback datoteku?"

#: diskdrake/interactive.pm:608
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Nakon promjene tipa particije %s, svi podaci na toj particiji će biti "
"izgubljeni"

#: diskdrake/interactive.pm:620
#, c-format
msgid "Change partition type"
msgstr "Izmjena tipa particije"

#: diskdrake/interactive.pm:621 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Koji datotečni sistem želite?"

#: diskdrake/interactive.pm:629
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Prebacujem sa ext2 na ext3"

#: diskdrake/interactive.pm:649
#, c-format
msgid "Which volume label?"
msgstr ""

#: diskdrake/interactive.pm:665
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Gdje želite montirati loopback datoteku %s?"

#: diskdrake/interactive.pm:666
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Gdje želite montirati uređaj %s?"

#: diskdrake/interactive.pm:671
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
"loopback.\n"
"Najprije uklonite loopback"

#: diskdrake/interactive.pm:696
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Gdje želite montirati uređaj %s?"

#: diskdrake/interactive.pm:720 diskdrake/interactive.pm:799
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Mijenjam veličinu"

#: diskdrake/interactive.pm:720
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Izračunavam granice FAT filesistema"

#: diskdrake/interactive.pm:756
#, c-format
msgid "This partition is not resizeable"
msgstr "Ovoj particiji ne možete mijenjati veličinu"

#: diskdrake/interactive.pm:761
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Svi podaci na ovoj particiji bi trebali biti backupovani"

#: diskdrake/interactive.pm:763
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"

#: diskdrake/interactive.pm:768
#, c-format
msgid "Choose the new size"
msgstr "Izaberite novu veličinu"

#: diskdrake/interactive.pm:769
#, c-format
msgid "New size in MB: "
msgstr "Nova veličina u MB: "

#: diskdrake/interactive.pm:810 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Da bi se osigurao integritet podataka nakon promjene veličine, \n"
"prilikom idućeg pokretanja Windows(TM) biće izvršena provjera datotečnog "
"sistema"

#: diskdrake/interactive.pm:851
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Izaberite postojeći RAID na koji ćete dodati"

#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:870
#, c-format
msgid "new"
msgstr "novi"

#: diskdrake/interactive.pm:868
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Izaberite postojeći LVM na koji ćete dodati"

#: diskdrake/interactive.pm:874
#, c-format
msgid "LVM name?"
msgstr "Naziv LVMa?"

#: diskdrake/interactive.pm:902
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:904
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:922
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Ova particija se ne može koristiti za loopback"

#: diskdrake/interactive.pm:935
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:936
#, c-format
msgid "Loopback file name: "
msgstr "Naziv loopback datoteke: "

#: diskdrake/interactive.pm:941
#, c-format
msgid "Give a file name"
msgstr "Dajte naziv datoteke"

#: diskdrake/interactive.pm:944
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Datoteku već koristi drugi loopback, izaberite neku drugu"

#: diskdrake/interactive.pm:945
#, c-format
msgid "File already exists. Use it?"
msgstr "Datoteka već postoji. Želite li je koristiti?"

#: diskdrake/interactive.pm:968
#, c-format
msgid "Mount options"
msgstr "Opcije montiranja"

#: diskdrake/interactive.pm:975
#, c-format
msgid "Various"
msgstr "Razno"

#: diskdrake/interactive.pm:1043
#, c-format
msgid "device"
msgstr "uređaj"

#: diskdrake/interactive.pm:1044
#, c-format
msgid "level"
msgstr "nivo"

#: diskdrake/interactive.pm:1045
#, c-format
msgid "chunk size in KiB"
msgstr "veličina chunka u KiB"

#: diskdrake/interactive.pm:1062
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Budite oprezni: ova operacija je opasna."

#: diskdrake/interactive.pm:1077
#, c-format
msgid "What type of partitioning?"
msgstr "Koju vrstu particioniranja?"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"

#: diskdrake/interactive.pm:1124
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"

#: diskdrake/interactive.pm:1147
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
"izgubljeni"

#: diskdrake/interactive.pm:1163
#, c-format
msgid "Move files to the new partition"
msgstr "Prebaci datoteke na novu particiju"

#: diskdrake/interactive.pm:1163 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr "Sakrij datoteke"

#: diskdrake/interactive.pm:1164
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktorij %s već sadrži neke podatke\n"
"(%s)"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Moving files to the new partition"
msgstr "Premještam datoteke na novu particiju"

#: diskdrake/interactive.pm:1179
#, c-format
msgid "Copying %s"
msgstr "Kopiram %s"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Removing %s"
msgstr "Uklanjam %s"

#: diskdrake/interactive.pm:1197
#, c-format
msgid "partition %s is now known as %s"
msgstr "particija %s je od sada poznata kao %s"

#: diskdrake/interactive.pm:1198
#, c-format
msgid "Partitions have been renumbered: "
msgstr "Oznake particija su promijenjene: "

#: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1280
#, c-format
msgid "Device: "
msgstr "Uređaj: "

#: diskdrake/interactive.pm:1219
#, c-format
msgid "Devfs name: "
msgstr "Devfs ime: "

#: diskdrake/interactive.pm:1220
#, c-format
msgid "Volume label: "
msgstr "Oznaka volumena: "

#: diskdrake/interactive.pm:1221
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS slovo uređaja: %s (pretpostavka)\n"

#: diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1234
#: diskdrake/interactive.pm:1298
#, c-format
msgid "Type: "
msgstr "Tip: "

#: diskdrake/interactive.pm:1229 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Ime: "

#: diskdrake/interactive.pm:1236
#, c-format
msgid "Start: sector %s\n"
msgstr "Početak: sector %s\n"

#: diskdrake/interactive.pm:1237
#, c-format
msgid "Size: %s"
msgstr "Veličina: %s"

#: diskdrake/interactive.pm:1239
#, c-format
msgid ", %s sectors"
msgstr ", %s sektora"

#: diskdrake/interactive.pm:1241
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindar %d do %d\n"

#: diskdrake/interactive.pm:1242
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1243
#, c-format
msgid "Formatted\n"
msgstr "Formatirana\n"

#: diskdrake/interactive.pm:1244
#, c-format
msgid "Not formatted\n"
msgstr "Nije formatirana\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Mounted\n"
msgstr "Montirana\n"

#: diskdrake/interactive.pm:1246
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1251
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback datoteka(e):\n"
"   %s\n"

#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Particija koja se boota po defaultu\n"
"    (za MS-DOS boot, ne za lilo)\n"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "Level %s\n"
msgstr "Nivo %s\n"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "Veličina chunka %d KiB\n"

#: diskdrake/interactive.pm:1256
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskovi %s\n"

#: diskdrake/interactive.pm:1258
#, c-format
msgid "Loopback file name: %s"
msgstr "Naziv loopback datoteke: %s"

#: diskdrake/interactive.pm:1261
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Postoji mogućnost da je ova\n"
"particija Driver particija. Vjerovatno\n"
"biste je trebali ostaviti na miru.\n"

#: diskdrake/interactive.pm:1264
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ova posebna Bootstrap\n"
"particija je za\n"
"dvojni boot vašeg sistema.\n"

#: diskdrake/interactive.pm:1281
#, c-format
msgid "Read-only"
msgstr "Samo za čitanje"

#: diskdrake/interactive.pm:1282
#, c-format
msgid "Size: %s\n"
msgstr "Veličina: %s\n"

#: diskdrake/interactive.pm:1283
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"

#: diskdrake/interactive.pm:1284 network/thirdparty.pm:331
#, c-format
msgid "Info: "
msgstr "Info: "

#: diskdrake/interactive.pm:1285
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskovi %s\n"

#: diskdrake/interactive.pm:1286
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tip tabele particija: %s\n"

#: diskdrake/interactive.pm:1287
#, c-format
msgid "on channel %d id %d\n"
msgstr "na kanalu %d id %d\n"

#: diskdrake/interactive.pm:1330
#, c-format
msgid "Filesystem encryption key"
msgstr "Ključ za kodiranje datotečnog sistema"

#: diskdrake/interactive.pm:1331
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Izaberite vaš ključ za kodiranje datotečnog sistema"

#: diskdrake/interactive.pm:1334
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Ovaj ključ enkripcije je previše jednostavan (mora imati najmanje %d "
"karaktera)"

#: diskdrake/interactive.pm:1335
#, c-format
msgid "The encryption keys do not match"
msgstr "Ključevi enkripcije se ne poklapaju"

#: diskdrake/interactive.pm:1338 network/netconnect.pm:1074
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "Ključ enkripcije"

#: diskdrake/interactive.pm:1339
#, c-format
msgid "Encryption key (again)"
msgstr "Ključ enkripcije (još jednom)"

#: diskdrake/interactive.pm:1341 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Algoritam enkripcije"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Promijeni tip"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "Ne mogu se prijaviti koristeći korisničko ime %s (pogrešna šifa?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Potrebna je autentikacija na domeni"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Koje korisničko ime"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Još jedan"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Molim unesite vaše korisničko ime, šifru i domen da biste pristupili ovom "
"računaru."

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "Korisničko ime"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Traži servere"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Traži nove servere"

#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket %s treba biti instaliran. Da li ga želite instalirati?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, c-format
msgid "Could not install the %s package!"
msgstr "Ne mogu instalirati paket %s!"

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Nedostaje obavezan paket %s"

#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1313
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307
#: printer/printerdrake.pm:5464 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Upozorenje"

#: do_pkgs.pm:35 standalone/harddrake2:527
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Sljedeći paketi trebaju biti instalirani:\n"

#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "Instaliram pakete..."

#: do_pkgs.pm:252
#, c-format
msgid "Removing packages..."
msgstr "Uklanjam pakete..."

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiram particiju %s"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "Kreiram i formatiram datoteku %s"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Ne znam kako formatirati %s kao tip %s"

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatiranje %s nije uspjelo"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Kružno montiranje %s\n"

#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr "Montiram particiju %s"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montiranje particije %s u direktoriju %s nije uspjelo"

#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr "Provjeravam %s"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "greška u demontiranju %s: %s"

#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr "Uključujem swap particiju %s"

#: fs/mount_options.pm:113
#, fuzzy, c-format
msgid "Use an encrypted file system"
msgstr "Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s"

#: fs/mount_options.pm:115
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:117
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu\n"
"(npr. radi bržeg pristupa spool-u na news serverima)."

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Može se montirati samo eksplicitno (tj.,\n"
"opcija -a neće montirati i ovaj sistem)."

#: fs/mount_options.pm:123
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "Nemoj interpretirati karakter ili blok uređaje na datotečnom sistemu."

#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Ne dozvoli izvršenje binarnih datoteka na montiranom\n"
"datotečnom sistemu. Ova opcija bi mogla biti korisna za server\n"
"koji ima datotečne sisteme koji sadrže programe za druge arhitekture."

#: fs/mount_options.pm:129
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"Ne dozvoli bitima set-user-identifier i set-group-identifier\n"
"da stupe na snagu. (Ovo se čini kao sigurno, ali je ustvari prilično\n"
"nesigurno ako ste instalirali suidperl(1).)"

#: fs/mount_options.pm:133
#, c-format
msgid "Mount the file system read-only."
msgstr "Montiraj datotečni sistem samo za čitanje."

#: fs/mount_options.pm:135
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "Sav U/I na datotečni sistem se treba izvršavati sinhrono."

#: fs/mount_options.pm:139
#, c-format
msgid "Allow an ordinary user to mount the file system."
msgstr ""

#: fs/mount_options.pm:141
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Support user. extended attributes"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr "Daj dozvolu za pisanje običnim korisnicima"

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Daj dozvolu za čitanje običnim korisnicima"

#: fs/type.pm:363
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Ne možete koristiti JFS za particije manje od 16MB"

#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "sa /usr"

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "server"

#: fsedit.pm:218
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Ne mogu pročitati tabelu particija na uređaju %s, previše je oštećena za "
"mene :(\n"
"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
"(greška je %s)\n"
"\n"
"Slažete li se sa gubitkom svih particija?\n"

#: fsedit.pm:382
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Tačke montiranja moraju počinjati sa /"

#: fsedit.pm:383
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Tačka montiranja se treba sastojati samo od brojeva i slova"

#: fsedit.pm:384
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Već postoji particija sa tačkom montiranja %s\n"

#: fsedit.pm:388
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Izabrali ste softversku RAID particiju kao root (/).\n"
"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
"Molim kasnije dodajte /boot particiju"

#: fsedit.pm:394
#, fuzzy, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr "Ne možete koristiti LVM logički volumen za tačku montiranja %s"

#: fsedit.pm:396
#, fuzzy, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
"Izabrali ste LVM logički volumen kao root (/).\n"
"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
"Molim kasnije dodajte /boot particiju"

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"

#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
"tačku montiranja\n"

#: fsedit.pm:408
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s"

#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Nema dovoljno prostora za auto-alokaciju"

#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "Nemam šta da radim"

#: harddrake/data.pm:62 install_any.pm:1710
#, c-format
msgid "Floppy"
msgstr "Disketa"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:88 install_any.pm:1711
#, c-format
msgid "Hard Disk"
msgstr "Hard Disk"

#: harddrake/data.pm:97 install_any.pm:1712
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD pržilica"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:127 standalone/drakbackup:2055
#, c-format
msgid "Tape"
msgstr "Traka"

#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Video kartica"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "TV kartica"

#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Drugi multimedijalni uređaj"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Zvučna kartica"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Web kamera"

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Procesori"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN adapteri"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""

#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Ethernet kartica"

#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr "Modem"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "ADSL adapteri"

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Memorija"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "AGP kontroleri"

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:989
#, c-format
msgid "Printer"
msgstr "Štampač"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Joystick"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "SATA kontroleri"

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "RAID kontroleri"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA kontroleri"

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Firewire kontroleri"

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA kontroleri"

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "SCSI kontroleri"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "USB kontroleri"

#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "USB portovi"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "SMBus kontroleri"

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "Mostovi (bridges) i sistemski kontroleri"

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:949 standalone/finish-install:37
#: standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Tastatura"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:982
#, c-format
msgid "Mouse"
msgstr "Miš"

#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "Skener"

#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr "Nepoznat/Ostali"

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Molim sačekajte... Primjenjujem konfiguraciju"

#: harddrake/sound.pm:229
#, c-format
msgid "No alternative driver"
msgstr "Nema alternativnog drajvera"

#: harddrake/sound.pm:230
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Nema nijedan poznat OSS/ALSA alternativni drajver za vašu zvučnu karticu (%"
"s) koja trenutno koristi \"%s\""

#: harddrake/sound.pm:236
#, c-format
msgid "Sound configuration"
msgstr "Podešavanje zvuka"

#: harddrake/sound.pm:238
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Ovdje možete izabrati alternativni drajver (ili OSS ili ALSA) za vašu zvučnu "
"karticu (%s)."

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:243
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Vaša kartica trenutno koristi %s \"%s\" drajver (uobičajeni drajver za vašu "
"karticu je \"%s\")"

#: harddrake/sound.pm:245
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
"operativnog sistema (dostupan je na većini UNIX(tm) sistema), ali je vrlo "
"elementaran i ograničen.\n"
"Pored toga, svi OSS drajveri ponovo izmišljaju točak.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
"podržava prilično velik broj ISA, USB i PCI kartica.\n"
"\n"
"Ona takođe pruža mnogo viši API nego OSS.\n"
"\n"
"Da biste koristili ALSA, možete koristiti:\n"
"- stari API kompatibilan sa OSSom\n"
"- novi ALSA API koji pruža mnoge napredne mogućnosti, ali zahtijeva upotrebu "
"ALSA biblioteke.\n"

#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Drajver:"

#: harddrake/sound.pm:267
#, c-format
msgid "Trouble shooting"
msgstr "Kako ukloniti problem?"

#: harddrake/sound.pm:275
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"Stari \"%s\" drajver je na crnoj listi.\n"
"\n"
"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
"\n"
"Stoga će novi drajver \"%s\" biti korišten tek nakon idućeg pokretanja "
"sistema."

#: harddrake/sound.pm:283
#, c-format
msgid "No open source driver"
msgstr "Nema open source drajver"

#: harddrake/sound.pm:284
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Nema slobodnih drajvera za vašu zvučnu karticu (%s), ali postoji vlasnički "
"drajver na \"%s\"."

#: harddrake/sound.pm:287
#, c-format
msgid "No known driver"
msgstr "Nema nijedan poznat drajver"

#: harddrake/sound.pm:288
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Nema poznatih drajvera za vašu zvučnu karticu (%s)"

#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838
#, c-format
msgid "Unknown driver"
msgstr "Nepoznat drajver"

#: harddrake/sound.pm:293
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Greška: Drajver \"%s\" za vašu zvučnu karticu nije na listi"

#: harddrake/sound.pm:307
#, c-format
msgid "Sound trouble shooting"
msgstr "Rješavanje problema sa zvukom"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:310
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Klasični način utvrđivanja bugova u zvučnom sistemu je izvršavanje\n"
"sljedećih naredbi:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver inače koristi\n"
"vaša kartica\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" će vam reći koji drajver je\n"
"trenutno u upotrebi\n"
"\n"
"- sa \"/sbin/lsmod\" možete provjeriti da li je modul (drajver) učitan\n"
"ili ne\n"
"\n"
"- \"/sbin/chkconfig --list sound\" i \"/sbin/chkconfig --list alsa\" vam\n"
"govore da li su servisi sound i alsa podešeni da se pokreću na\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" će vam reći da li je zvuk utišan (muted) ili ne\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvučnu "
"karticu.\n"

#: harddrake/sound.pm:336
#, c-format
msgid "Let me pick any driver"
msgstr "Dozvoli da sam odaberem drajver"

#: harddrake/sound.pm:339
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Slobodan izbor drajvera"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:342
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Ako stvarno mislite da znate koji drajver je odgovarajući za vašu karticu\n"
"možete odabrati jedan sa gornje liste.\n"
"\n"
"Trenutni drajver za vašu \"%s\" zvučnu karticu je \"%s\""

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "Auto prepoznavanje"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Nepoznat|Opšti"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Nepoznat|CPH05X (bt878) [razni proizvođači]"

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Nepoznat|CPH06X (bt878) [razni proizvođači]"

#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Za većinu modernih TV kartica, bttv modul Linux kernela automatski "
"prepoznaje odgovarajuće parametre.\n"
"Ako je vaša kartica pogrešno prepoznata, ovdje možete prisiliti odgovarajući "
"tip tunera i kartice. Samo izaberite parametre vaše TV karte."

#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "Model kartice:"

#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr "Vrsta tunera:"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr "Broj capture buffera:"

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "broj capture buffera za mmap-ovani capture"

#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr "PLL postavka:"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "Podrška za radio:"

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "uključi radio podršku"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona\n"
"pokriva cijelu Mandriva Linux distribuciju. Ako se slažete sa svim\n"
"uvjetima u njoj, izaberite opciju \"%s\". Ako ne, klikom na \"%s\" ćete\n"
"restartovati vaš računar."

#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:740 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Prihvatam"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux je višekorisnički sistem, što znači da svaki korisnik može imati\n"
"vlastite preference, vlastite datoteke i tako dalje. Možete pročitati "
"''Početnički\n"
"vodič'' da biste saznali više o višekorisničkim sistemima. Ali za razliku "
"od\n"
"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
"trenutku\n"
"neće biti dozvoljeno da promijene ništa osim vlastitih datoteka i vlastite\n"
"konfiguracije, čime je sistem zaštićen od nenamjernih ili zlonamjernih "
"izmjena\n"
"koje mogu uticati na cijeli sistem. Moraćete kreirati najmanje jednog "
"korisnika\n"
"za vas same -- ovo je račun koji trebate koristiti za rutinsku, svakodnevnu\n"
"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
"svašta,\n"
"to takođe može biti i vrlo opasno! Jedna greška može značiti da vaš sistem\n"
"više ne radi. Ako napravite ozbiljnu pogrešku kao običan korisnik, najgore\n"
"što se može desiti jeste da izgubite neke informacije, ali ne i da utičete "
"na\n"
"cijeli sistem.\n"
"\n"
"U prvom polju unosite vaše pravo ime i prezime. Naravno, ovo nije obavezno\n"
"-- u stvari možete ovdje unijeti šta god hoćete. DrakX će koristiti prvu "
"riječ\n"
"koju unesete i kopirati je u polje \"%s\", što je ime koje će ovaj\n"
"korisnik unositi da bi ušao na sistem. Ako želite, možete promijeniti\n"
"ponuđenu vrijednost. Idući korak je da unesete šifru. Sa sigurnosne tačke\n"
"gledišta, šifra neprivilegovanog (običnog) korisnika nije tako važna kao "
"\"root\"\n"
"šifra, ali to nije razlog da je zanemarite tako što ćete je ostaviti praznom "
"ili\n"
"prejednostavnom: na kraju krajeva, vaše lične datoteke je ono što je u\n"
"riziku.\n"
"\n"
"Jednom kada kliknete na \"%s\", možete ih dodati još.\n"
"Dodajte po jednog korisnika za svakog od vaših prijatelja: na primjer za\n"
"vašeg oca ili sestru. Kliknite na \"%s\" kada završite dodavanje korisnika.\n"
"\n"
"Klikanjem na dugme \"%s\" možete promijeniti osnovni \"shell\" za tog\n"
"korisnika (ponuđen je bash).\n"
"\n"
"Kada završite dodavanje svih korisnika, bićete upitani da odaberete\n"
"korisnika koji se može automatski prijaviti prilikom pokretanja sistema.\n"
"Ako ste zainteresovani za ovu mogućnost (i ne brinete previše o lokalnoj\n"
"sigurnosti), izaberite željenog korisnika i window manager, zatim kliknite\n"
"na \"%s\". Ako niste zainteresovani za to, isključite opciju\n"
"\"%s\"."

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Korisničko ime"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:385 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Dalje"

#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Da li želite koristiti ovu mogućnost?"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Ovdje su navedene Linux particije koje već postoje na vašem hard disku.\n"
"Možete zadržati izbore koje je napravio čarobnjak, pošto su oni dobri za\n"
"uobičajene instalacije. Ako napravite neke izmjene, morate, ako ništa\n"
"drugo, definisati root particiju (\"/\"). Nemojte izabrati premalu "
"particiju\n"
"ili nećete moći instalirati dovoljno softvera. Ako želite držati vaše "
"podatke\n"
"na zasebnoj particiji, trebate takođe napraviti \"/home\" particiju (što je\n"
"moguće samo ako imate više od jedne Linux particije na raspolaganju).\n"
"\n"
"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
"\n"
"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
"particije\" (na primjer, \"hda1\").\n"
"\n"
"\n"
"\"Vrsta hard diska\" je \"hd\" ako je vaš hard disk IDE, a \"sd\" ako je\n"
"u pitanju SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
"diskova:\n"
"\n"
" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
"\n"
" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
"\n"
"Kod SCSI hard diskova, \"a\" je \"disk sa najnižim SCSI IDom\", \"b\"\n"
"je \"drugi najniži SCSI ID\", itd."

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandriva Linux instalacija se prostire na nekoliko CDova. Ako je neki\n"
"paket smješten na drugom CDu, DrakX će izbaciti trenutni CD i zamoliti vas\n"
"da ubacite neki drugi po potrebi. Ako nemate potreban CD pri ruci,\n"
"samo kliknite na \"%s\", odgovarajući paketi neće biti instalirani."

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"Sada je vrijeme da izaberete koje programe želite instalirati na vaš\n"
"sistem. Za Mandriva Linux su dostupne hiljade paketa, pa da bi\n"
"njihovo upravljanje bilo lakše, organizovani su u grupe slične\n"
"primjene.\n"
"\n"
"Paketi su sortirani u grupe ovisno o tipičnoj namjeni vašeg računara.\n"
"U Mandriva Linuxu date su četiri predefinisane kategorije. Možete\n"
"miješati i poklapati programe iz raznih grupa, pa tako instalacija ``Radna\n"
"stanica'' može sadržavati programe iz grupe ``Programiranje''.\n"
"\n"
" * \"%s\": ako planirate da koristite vaš računar kao radnu stanicu, "
"izaberite\n"
"jednu ili više grupa koje se nalaze u ovoj kategoriji.\n"
"\n"
" * \"%s\": ako planirate koristiti vaš računar za programiranje, izaberite\n"
"odgovarajuće grupe iz te kategorije. Posebna \"LSB\" grupa će podesiti\n"
"vaš sistem tako da on bude sukladan specifikaciji Linux Standard Base\n"
"koliko god je to moguće.\n"
"\n"
"   Izborom \"LSB\" grupe također ćete koristiti kernel serije \"2.4\",\n"
"umjesto uobičajenog \"2.6\". Ovo je kako bi se osigurala 100%%\n"
"sukladnost sistema sa LSBom. Ipak, čak i ako niste izabrali opciju\n"
"\"LSB\" imaćete sistem koji je skoro 100%% sukladan sa LSBom.\n"
"\n"
" * \"%s\": ako je vaš računar zamišljen kao server, izaberite koje od\n"
"uobičajenih servisa želite instalirati na vaš računar.\n"
"\n"
" * \"%s\": ovdje možete izabrati vašu preferiranu grafičku okolinu. Barem\n"
"jedna od njih mora biti izabrana ako želite da imate grafički interfejs.\n"
"\n"
"Držanjem kursora miša iznad imena grupe će nakratko prikazati kratko\n"
"objašnjenje o pojedinoj grupi.\n"
"\n"
"Možete aktivirati opciju \"%s\", koja je zgodna ako se upoznati sa "
"ponuđenim\n"
"paketima ili ako želite imati potpunu kontrolu nad onim što će se "
"instalirati.\n"
"\n"
"Ako ste započeli instalaciju u \"%s\" režimu, možete isključiti sve grupe\n"
"kako biste izbjegli instalaciju bilo kojeg novog paketa. Ovo je pogodno za\n"
"popravljanje ili unaprjeđenje postojećeg sistema.\n"
"\n"
"Ako isključite sve grupe prilikom obavljanja obične instalacije (a ne\n"
"upgrade), iskočiće dijalog koji vam nudi razne opcije za minimalnu "
"instalaciju:\n"
"\n"
" * \"%s\": instalira minimalan mogući broj paketa potrebnih da imate\n"
"funkcionalan grafički desktop.\n"
"\n"
" * \"%s\": instalira bazni sistem plus osnovne alate i njihovu\n"
"dokumentaciju.\n"
" Ova instalacija je prikladna za podešavanje servera.\n"
"\n"
" * \"%s\": ovo će instalirati apsolutni minimum paketa potrebnih da imate\n"
"funkcionalan Linux sitsem. Sa ovom instalacijom imaćete samo komandnu\n"
"liniju. Ukupna veličina ove instalacije je oko 65 megabajta."

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Radna stanica"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Programiranje"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Grafičko okruženje"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648
#, c-format
msgid "Individual package selection"
msgstr "Izbor pojedinačnih paketa"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Unaprijedi"

#: help.pm:146 install_steps_interactive.pm:606
#, c-format
msgid "With X"
msgstr "Sa X-om"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Sa osnovnom dokumentacijom"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Stvarno minimalna instalacija"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"Ako ste naveli da želite individualno izabrati pakete, biće vam prikazano\n"
"stablo koje sadrži sve pakete klasifikovane po grupama i podgrupama.\n"
"Pregledajući stablo, možete izabrati čitave grupe, podgrupe ili\n"
"individualne pakete.\n"
"\n"
"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
"vam objašnjava svrhu paketa.\n"
"\n"
"!! Ako izaberete neki serverski paket, zato što ste specifično izabrali taj\n"
"paket ili zato što je on dio grupe paketa, bićete zamoljeni da potvrdite da\n"
"zaista želite da taj server bude instaliran. Mandriva Linux obično\n"
"automatski pokreće sve instalirane servise prilikom pokretanja sistema.\n"
"Čak i ako su sigurni i nemaju poznatih problema u trenutku pakovanja\n"
"distribucije, sasvim je moguće da su neke sigurnosne rupe otkrivene\n"
"nakon što je dovršena ova verzija Mandriva Linuxa. Ako niste sigurni\n"
"čemu tačno služi taj paket ili zašto ga treba instalirati, kliknite na \"%s"
"\".\n"
"Klikom na \"%s\" instalirate navedene servise i oni će biti automatski\n"
"pokrenuti tokom pokretanja sistema. !!\n"
"\n"
"Opcija \"%s\" se koristi da bi se isključio dijalog upozorenja\n"
"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
"neki paket kako bi razriješio neku zavisnost. Pojedini paketi imaju\n"
"zavisnost jedan od drugog u smislu da instalacija jednog paketa traži\n"
"da bude instaliran i drugi. Instalacioni program može odrediti koji paketi\n"
"su potrebni da bi se zadovoljila zavisnost i uspješno završila instalacija.\n"
"\n"
"Mala ikona sa disketom na dnu liste vam omogućuje da učitate listu paketa\n"
"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako "
"želite\n"
"da imate nekoliko računara koji su identično podešeni. Nakon klika na ovu\n"
"ikonu bićete zamoljeni da u disketnu jedinicu stavite disketu napravljenu\n"
"tokom ranije instalacije. Pogledajte drugi savjet na zadnjem koraku da "
"biste\n"
"saznali kako se pravi ova disketa."

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "Ne"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Da"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "Automatske ovisnosti"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": klikanjem na dugme \"%s\" otvorićete čarobnjak za\n"
"podešavanje štampača. Konsultujte odgovarajuće poglavlje ``Vodiča za\n"
"početnike'' za više informacija o tome kako podesiti novi štampač.\n"
"Interfejs koji je tamo prikazan je vrlo sličan onom koji se koristi\n"
"prilikom instalacije."

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Podesi"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Ovim dijalogom možete izabrati koje servise želite pokretati prilikom "
"boota.\n"
"\n"
"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
"instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu\n"
"potrebni prilikom boota.\n"
"\n"
"Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis.\n"
"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
"mijenjate predloženi izbor.\n"
"\n"
"!! Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vaš\n"
"računar kao server: vjerovatno ne želite da pokrenete neke servise koji\n"
"vam ne trebaju. Molim vas da zapamtite da pojedini servisi mogu biti\n"
"opasni ako su aktivni na serveru. Općenito, izaberite samo one servise\n"
"koji vam stvarno trebaju. !!"

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je\n"
"sat na vašoj matičnoj ploči podešen na lokalno vrijeme, možete isključiti "
"ovu\n"
"opciju isključujući \"%s\", što će saopštiti GNU/Linuxu da su sistemski sat\n"
"i hardverski sat u istoj vremenskoj zoni. Ovo je korisno kada se na "
"računaru\n"
"takođe nalazi i drugi operativni sistem kao što je Windows.\n"
"\n"
"Opcija \"%s\" će automatski regulisati sat spajajući se na udaljeni time "
"server\n"
"na Internetu. Kako bi ova mogućnost radila, morate imati ispravnu Internet\n"
"konekciju. Najbolje je izabrati time server negdje u vašoj blizini. Ova "
"opcija\n"
"će ustvari instalirati time server koji mogu koristiti i drugi računari u "
"vašoj\n"
"lokalnoj mreži."

#: help.pm:217 install_steps_interactive.pm:884
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Hardverski sat podešen na GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Automatska sinhronizacija vremena"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Grafička kartica\n"
"\n"
"   Instalacija obično automatski prepoznaje i podešava grafičku karticu\n"
"koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati\n"
"sa liste karticu koja je ugrađena u vaš računar.\n"
"\n"
"   U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
"vašim potrebama."

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X (skraćeno od X Window System) je srce GNU/Linux grafičkog interfejsa\n"
"o kojem ovise sve grafičke okoline (KDE, GNOME, AfterStep,\n"
"WindowMaker itd.) uključene u Mandriva Linux.\n"
"\n"
"Biće vam predstavljena lista različitih parametara koje možete promijeniti\n"
"da biste dobili optimalan grafički prikaz.\n"
"\n"
"Grafička kartica\n"
"\n"
"   Instalacija obično automatski prepoznaje i podešava grafičku karticu\n"
"koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati\n"
"sa liste karticu koja je ugrađena u vaš računar.\n"
"\n"
"   U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
"vašim potrebama.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Instalacioni program obično može prepoznati i podesiti monitor koji\n"
"je povezan na vaš računar. Ako se ovo ne desi, možete odabrati neki\n"
"monitor sa ove liste.\n"
"\n"
"\n"
"\n"
"Rezolucija\n"
"\n"
"   Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su\n"
"moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje\n"
"odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane\n"
"konfiguracije je prikazan na slici monitora.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Ovisno o vašem hardveru, ova opcija možda neće biti dostupna.\n"
"\n"
"   Sistem će pokušati prikazati grafički ekran na željenoj rezoluciji.\n"
"Ako možete vidjeti poruku tokom testa i odgovorite sa \"%s\", DrakX\n"
"će produžiti na idući korak. Ako ne možete vidjeti poruku, to znači\n"
"da je neki dio automatski prepoznate konfiguracije bio pogrešan.\n"
"Test će automatski završiti nakon 12 sekundi, čime ćete biti vraćeni na\n"
"meni. Mijenjajte postavke dok ne dobijete ispravan grafički prikaz.\n"
"\n"
"\n"
"\n"
"Opcije\n"
"\n"
"   Ovdje možete izabrati da li želite da vaš računar automatski pređe na\n"
"grafički interfejs nakon uključivanja. Očito, trebate odgovoriti \"%s\" ako\n"
"će vaš računar imati ulogu servera ili ako imate problema sa\n"
"podešavanjem ekrana."

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Monitor\n"
"\n"
"   Instalacioni program obično može prepoznati i podesiti monitor koji\n"
"je povezan na vaš računar. Ako se ovo ne desi, možete odabrati sa ove\n"
"liste monitor koji je ustvari povezan na vaš računar."

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Rezolucija\n"
"\n"
"    Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su\n"
"moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje\n"
"odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane\n"
"konfiguracije je prikazan na slici monitora."

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
"vašim potrebama."

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"Opcije\n"
"\n"
"   Ovdje možete izabrati da li želite da vaš računar automatski pređe na\n"
"grafički interfejs nakon uključivanja. Očito, trebate odgovoriti \"%s\" ako\n"
"će vaš računar imati ulogu servera ili ako imate problema sa\n"
"podešavanjem ekrana."

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Na ovom mjestu trebate izabrati gdje želite instalirati Mandriva Linux\n"
"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
"particionirate. U biti, particioniranje hard diska predstavlja logičko\n"
"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n"
"Mandriva Linux sistema.\n"
"\n"
"Pošto su efekti particioniranja obično nepovratni, i mogu voditi do gubitka\n"
"podataka na eventualnom postojećem operativnom sistemu, particioniranje\n"
"može biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, "
"postoji\n"
"čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molim\n"
"pročitajte pažljivo ovaj tekst i, prije svega, nemojte žuriti.\n"
"\n"
"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n"
"mogućnosti:\n"
"\n"
" * \"%s\": Ova opcija vodi na automatsko particioniranje vašeg praznog\n"
"diska (diskova). Ako izaberete ovu opciju, neće biti postavljana\n"
"nikakva daljnja pitanja.\n"
"\n"
" * \"%s\": Čarobnjak je detektovao jednu ili više postojećih\n"
"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n"
"opciju. U tom slučaju, bićete upitani da izaberete tačke montiranja koje\n"
"odgovaraju svakoj od ovih particija. Automatski će biti predložene ranije\n"
"tačke montiranja, i najčešće je pametno zadržati ih.\n"
"\n"
" * \"%s\": Ako je na vašem hard\n"
"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
"moraćete napraviti nešto slobodnog prostora za GNU/Linux. To možete učiniti\n"
"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opciju\n"
"``Obriši čitav disk'' ispod) ili možete promijeniti veličinu vaše Microsoft\n"
"Windows FAT ili NTFS particije. Promjena veličine se može izvršiti bez "
"gubitka\n"
"podataka, pod uslovom da prethodno defragmentirate Windows particiju\n"
"i da ona koristi FAT format. Backupovanje vaših podataka je strogo\n"
"preporučeno. Ova mogućnost je preporučena ako namjeravate koristiti i\n"
"Mandriva Linux i Microsoft Windows na istom računaru.\n"
"\n"
"    Prije izbora ove opcije, molim da imate na umu da će, nakon ove\n"
"procedure, veličina vaše Microsoft Windows particije biti manja nego\n"
"trenutno. To znači da će Microsoft Windows prijavljivati da imate manje\n"
"prostora za smještaj podataka ili instaliranje novog softwarea.\n"
"\n"
" * \"%s\": Ako želite da obrišete sve podatke i sve particije koje su\n"
"prisutne na vašem hard disku i umjesto njih postavite vaš novi Mandriva\n"
"Linux sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n"
"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
"\n"
"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
"izgubljeni. !!\n"
"\n"
" * \"%s\": Ova opcija se javlja kada je čitav disk zauzet Microsoft\n"
"Windowsom. Ovo će jednostavno pobrisati sve na disku i početi od\n"
"početka, particionirajući ga.\n"
"\n"
"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
"izgubljeni. !!\n"
"\n"
" * \"%s\": Ako želite da ručno particionirate vaš hard disk,\n"
"izaberite ovu opciju. Budite oprezni -- to je moćan, ali i opasan izbor. "
"Vrlo\n"
"lako možete izgubiti sve vaše podatke. Zato ovu opciju ne preporučujemo,\n"
"osim ako ste nešto ovakvo već radili i imate nekog iskustva. Više uputstava\n"
"za korištenje DiskDrake alata možete naći u ``Vodiču za početnike'', "
"odjeljak\n"
"``Upravljanje vašim particijama''."

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Koristi slobodan prostor"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Koristi postojeću particiju"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Koristi slobodan prostor na Windows particiji"

#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr "Pobriši čitav disk"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Ukloni Windows"

#: help.pm:374 install_interactive.pm:232
#, c-format
msgid "Custom disk partitioning"
msgstr "Ručno particioniranje diska"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"To je to. Instalacija je sada završena i vaš GNU/Linux sistem je spreman\n"
"za upotrebu. Samo kliknite na \"%s\" da restartujete sistem. Ne zaboravite\n"
"da izvadite instalacioni medij (CD-ROM ili disketu). Prva stvar\n"
"koju ćete ugledati nakon što računar završi hardverske provjere je meni\n"
"bootloadera, koji vam nudi izbor operativnog sistema koji želite pokrenuti.\n"
"\n"
"Dugme \"%s\" će vam ponuditi još dva dugmeta za:\n"
"\n"
" * \"%s\": da biste napravili instalacionu\n"
"disketu koja će automatski izvršiti cijelu instalaciju bez intervencije\n"
"operatora, sličnu instalaciji koju ste upravo konfigurisali.\n"
"\n"
"   Obratite pažnju na dvije različite opcije koje su dostupne nakon\n"
"klikanja na ovo dugme:\n"
"\n"
"    * \"%s\". Ovo je djelomično automatizirana instalacija. Korak\n"
"particioniranja je jedini interaktivni dio.\n"
"\n"
"    * \"%s\". Potpuno automatska instalacija: hard disk je\n"
"potpuno prepisan, svi podaci su izgubljeni.\n"
"\n"
"   Ova mogućnost je vrlo prikladna kada instalirate nekoliko sličnih\n"
"računara. Pogledajte odjeljak Automatska instalacija na našoj web stranici\n"
"za više informacija.\n"
"\n"
" * \"%s\": snima listu paketa koje ste izabrali u ovoj\n"
"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom,\n"
"ubacite disketu i započnite instalaciju. Na upitu, pritisnite tipku [F1]\n"
"i ukucajte >>linux defcfg=\"floppy\" <<."

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Napravi auto-instalacijsku disketu"

#: help.pm:409 install_steps_interactive.pm:1339
#, c-format
msgid "Replay"
msgstr "Ponovi"

#: help.pm:409 install_steps_interactive.pm:1339
#, c-format
msgid "Automated"
msgstr "Automatizovano"

#: help.pm:409 install_steps_interactive.pm:1342
#, c-format
msgid "Save packages selection"
msgstr "Spasi izbor paketa"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Ako želite koristiti neke stare GNU/Linux particije, možda ćete poželjeti\n"
"da reformatirate neke od njih kako biste pobrisali podatke koje sadrže.\n"
"Ako želite to učiniti, molim takođe izaberite i te particije.\n"
"\n"
"Molim obratite pažnju da nije neophodno formatirati sve postojeće\n"
"particije. Morate reformatirati particije koje sadrže operativni sistem\n"
"(kao što su \"/\", \"/usr\" ili \"var\") ali ne morate reformatirati "
"particije\n"
"koje sadrže podatke koje želite zadržati (tipično /home).\n"
"\n"
"Molim da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
"povratite.\n"
"\n"
"Kliknite na \"%s\" kada budete spremni za formatiranje particija.\n"
"\n"
"Kliknite na \"%s\" ako želite da izaberete druge particije za instalaciju\n"
"vašeg novog Mandriva Linux operativnog sistema.\n"
"\n"
"Kliknite na \"%s\" da izaberete particije koje želite provjeriti radi\n"
"loših blokova."

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "Nazad"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"Kada završite instalaciju Mandriva Linuxa, moguće je da su neki paketi\n"
"ažurirani od zadnjeg izdanja. Moguće je da su ispravljeni bugovi ili\n"
"rješena neka sigurnosna pitanja. Ako želite iskoristiti ova unaprjeđenja,\n"
"možete ih sada dobaviti sa Interneta. Izaberite \"%s\" ako imate ispravnu\n"
"Internet vezu, ili \"%s\" ako ćete radije instalirati ažurirane pakete\n"
"kasnije.\n"
"\n"
"Ako izaberete \"%s\" dobićete listu web lokacija sa kojih se mogu skinuti\n"
"novi paketi. Izaberite ono najbliže vama. Pojaviće se stablo za izbor\n"
"paketa: pregledajte izabrano i pritisnite \"%s\" da dobavite i\n"
"instalirate izabrane pakete, ili \"%s\" za prekid."

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "Instalacija"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"Na ovom mjestu, DrakX vam omogućuje da izaberete sigurnosni nivo\n"
"koji želite imati na ovom računaru. Kao pravilo, sigurnosni nivo treba biti\n"
"tim viši što su važniji podaci na računaru, a pogotovo ako će računar biti\n"
"direktno izložen Internetu. Većim nivoom sigurnosti obično gubite na\n"
"jednostavnosti korištenja.\n"
"\n"
"Ako ne znate šta izabrati, zadržite ponuđenu opciju. Možete promijeniti\n"
"nivo sigurnosti naknadno koristeći program draksec iz Mandriva Linux\n"
"Kontrolnog centra.\n"
"\n"
"Polje \"%s\" obavještava sistem o korisniku koji će biti odgovoran za\n"
"sigurnost. Njemu će biti upućena sigurnosna obavještenja."

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Sigurnosni administrator"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Sada trebate izabrati koje particije želite koristiti za instalaciju vašeg\n"
"Mandriva Linux sistema. Ako su particije već definisane, iz prijašnje\n"
"GNU/Linux instalacije ili nekim drugim alatom za particioniranje, možete\n"
"koristiti postojeće particije. U suprotnom, sada morate definisati\n"
"particije vašeg hard diska.\n"
"\n"
"Da biste napravili particije, najprije morate izabrati hard disk. Možete\n"
"izabrati disk za particioniranje klikom na ''hda'' za prvi IDE disk, "
"''hdb''\n"
"za drugi, ''sda'' za prvi SCSI disk i slično.\n"
"\n"
"Pri particioniranju hard diska, možete koristiti sljedeće opcije:\n"
"\n"
" * \"%s\": ova opcija briše sve particije na izabranom hard disku\n"
"\n"
" * \"%s\": ova opcija vam omogućuje da automatski napravite ext3\n"
"i swap particije u slobodnom prostoru vašeg hard diska\n"
"\n"
"\"%s\" omogućuje pristup dodatnim mogućnostima:\n"
"\n"
" * \"%s\": snima tabelu particija na disketu. Ovo je korisno za\n"
"kasnije vraćanje tabele particija, ako je potrebno. Strogo je preporučeno\n"
"da izvršite ovaj korak.\n"
"\n"
" * \"%s\": omogućuje vam da vratite ranije snimljenu tabelu\n"
"particija sa diskete.\n"
"\n"
" * \"%s\": ako je vaša tabela particija oštećena, možete je pokušati\n"
"obnoviti koristeći ovu opciju. Molim budite pažljivi i zapamtite da\n"
"ova opcija ne uspijeva svaki put.\n"
"\n"
" * \"%s\": poništava sve promjene i ponovo učitava originalnu tabelu\n"
"particija sa hard diska.\n"
"\n"
" * \"%s\": isključivanjem ove opcije ćete prisiliti korisnike da ručno\n"
"montiraju i demontiraju izmjenjive medije kao što su diskete i\n"
"CD-ROMovi.\n"
"\n"
" * \"%s\": koristite ovu opciju ako želite koristiti čarobnjak za\n"
"particioniranje vašeg hard diska. Ovo je preporučeno ako nemate\n"
"izraženo razumijevanje particioniranja.\n"
"\n"
" * \"%s\": koristite ovu opciju da poništite vaše izmjene.\n"
"\n"
" * \"%s\": omogućuje dodatne akcije na particijama (tip, opcije,\n"
"formatiranje) i daje više informacija o hard disku.\n"
"\n"
" * \"%s\": kada završite particioniranje diska, ovo će zapisati\n"
"vaše izmjene na disk.\n"
"\n"
"Prilikom definisanja veličine particije, možete fino podešavati veličinu\n"
"particije koristeći dugmad sa strjelicama na vašoj tastaturi.\n"
"\n"
"Napomena: svaku opciju možete postići tastaturom. Između particija\n"
"se krećete koristeći dugme [Tab] i strjelice [Gore/Dolje].\n"
"\n"
"Kada izaberete particiju, možete koristiti:\n"
"\n"
" * Ctrl-C da napravite novu particiju (ako ste izabrali prazan prostor)\n"
"\n"
" * Ctrl-D da obrišete particiju\n"
"\n"
" * Ctrl-M da podesite tačku montiranja\n"
"\n"
"Da biste dobili informacije o raznim tipovima datotečnog sistema koji\n"
"su dostupni, pročitajte poglavlje o ext2FS iz ''Referentnog priručnika''.\n"
"\n"
"Ako instalirate na PPC računar, trebate napraviti malu HFS ''bootstrap''\n"
"particiju od najmanje 1 MB koju će koristiti yaboot bootloader. Ako se\n"
"odlučite da ovu particiju učinite nešto većom, npr. 50 MB, primjetićete\n"
"da je ona korisno mjesto za čuvanje rezervnog kernela ili ramdisk slika\n"
"za hitne slučajeve."

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Automatsko montiranje izmjenjivog medija"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Prekidač normalnog/ekspertnog moda"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Na vašem hard disku ustanovljeno je više od jedne Microsoft particije.\n"
"Molim izaberite onu koju želite smanjiti kako biste instalirali vaš\n"
"Mandriva Linux operativni sistem.\n"
"\n"
"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
"\"Kapacitet\".\n"
"\n"
"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
"\"broja particije\" (na primjer, \"hda1\").\n"
"\n"
"\"Vrsta hard diska\" je \"hd\" ako je vaš hard disk IDE, a \"sd\" ako je\n"
"u pitanju SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
"diskova:\n"
"\n"
" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
"\n"
" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
"\n"
" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
"\n"
"Kod SCSI hard diskova, \"a\" je \"disk sa najnižim SCSI IDom\", \"b\"\n"
"je \"drugi najniži SCSI ID\", itd.\n"
"\n"
"\"Windows ime\" je slovo kojim je vaš hard disk označen pod Windowsom\n"
"(prva particija prvog diska se zove \"C:\")."

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": provjerite trenutni izbor države. Ako se ne nalazite ovdje,\n"
"kliknite na dugme \"%s\" i izaberite neku drugu državu. Ako se vaša\n"
"zemlja ne nalazi na listi, kliknite na dugme \"%s\" kako biste dobili\n"
"listu svih država."

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
"Ovaj korak se aktivira samo ako je na vašem računaru pronađena postojeća\n"
"GNU/Linux particija.\n"
"\n"
"DrakX sada treba znati da li želite izvršiti novu instalaciju ili\n"
"nadogradnju postojećeg Mandriva Linux sistema:\n"
"\n"
" * \"%s\". Najčešće ovo će u potpunosti obrisati stari sistem. Ipak,\n"
"ovisno o vašoj šemi particioniranja, možete spriječiti da neki od vaših\n"
"postojećih podataka (prije svega \"home\" direktoriji) budu prepisani.\n"
"Ako želite promijeniti particioniranje starog hard diska ili promijeniti\n"
"datotečni sistem, trebate koristiti ovu opciju.\n"
"\n"
" * \"%s\". Ova vrsta instalacije vam omogućuje da ažurirate pakete\n"
"koji su trenutno instalirani na vašem Mandriva Linux sistemu. Vaša trenutna\n"
"šema particioniranja i korisnički podaci neće biti izmijenjeni. Većina\n"
"ostalih koraka konfiguracije ostaju kao što jesu, slično običnoj "
"instalaciji.\n"
"\n"
"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandriva Linux sistemima\n"
"koji koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim\n"
"verzijama Mandriva Linuxa, prije verzije \"8.1\", nije preporučeno."

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Ovisno o jeziku koji izaberete (), DrakX će\n"
"automatski izabrati određeni tip tastature. Provjerite da li vam izabrano\n"
"odgovara ili odaberite neki drugi raspored tastature.\n"
"\n"
"Ipak, možda nemate tastaturu koja tačno odgovara vašem jeziku: npr.\n"
"ako ste Švajcarac koji govori engleski, možda imate švajcarsku tastaturu.\n"
"Ili ako govorite engleski ali se nalazite u Kvibeku, možda ćete se naći u\n"
"situaciji gdje se vaš jezik i tastatura ne poklapaju. U svakom slučaju, "
"ovaj\n"
"korak instalacije vam omogućava da izaberete odgovarajuću tastaturu sa "
"liste.\n"
"\n"
"Kliknite na dugme \"%s\" kako bi vam bila predstavljena potpuna lista\n"
"podržanih tastatura.\n"
"\n"
"Ako izaberete raspored tipaka koji je baziran na ne-latiničnoj abecedi,\n"
"sljedeći dijalog će vam ponuditi da izaberete tipke pomoću kojih možete\n"
"prebaciti tastaturu između latiničnog i ne-latiničnog rasporeda."

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"Prvi korak je da izaberete preferirani jezik.\n"
"\n"
"Vaš izbor preferiranog jezika će se odraziti na jezik dokumentacije,\n"
"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
"kojoj se nalazite, a zatim jezik kojim govorite.\n"
"\n"
"Klikanjem na dugme \"%s\" možete izabrati druge jezike koje\n"
"želite instalirati na vašu radnu stanicu, time instalirajući sistemsku\n"
"dokumentaciju i programe za svaki od izabranih jezika. Na primjer, ako\n"
"će vaš računar koristiti osobe iz španije, izaberite Engleski kao osnovni\n"
"jezik na listi, a \"%s\" u oblasti Više opcija.\n"
"\n"
"O UTF-8 (Unicode) podršci. Unicode je novi način kodiranja znakova čiji\n"
"je cilj da obuhvati sve postojeće jezike. Ipak puna podrška za njega pod\n"
"GNU/Linuxom je još uvijek u razvoju. Iz tog razloga, Mandriva Linux će ga\n"
"koristiti ovisno o drugim izborima korisnika:\n"
"\n"
" * Ako izaberete jezike sa raširenim starim kodiranjem (latin1 jezici, "
"ruski,\n"
"japanski, kineski, korejanski, tajlandski, grčki, turski, većina iso-8859-2\n"
"jezika), biće korišteno staro kodiranje;\n"
"\n"
" * Za ostale jezike podrazumijeva se Unicode;\n"
"\n"
" * Ako je potrebno dva ili više jezika koji ne koriste isto kodiranje, "
"Unicode\n"
"će se koristiti za čitav sistem;\n"
"\n"
" * Konačno, Unicode može biti nametnut sistemu ako korisnik to odluči\n"
"izborom opcije \"%s\" bez obzira na izabrane jezike.\n"
"n\n"
"Obratite pažnju da niste ograničeni na samo jedan dodatni jezik. Možete\n"
"ih izabrati nekoliko ili čak ih instalirati sve klikom na polje \"%s\".\n"
"Vaš izbor podrške za neki jezik označava da će biti instaliran prijevod,\n"
"fontovi, pravila za provjeru pravopisa itd. za taj jezik.n\n"
"\n"
"Da biste izabrali između raznih jezika instaliranih na vašem sistemu, "
"možete\n"
"pokrenuti kao \"root\" naredbu \"localedrake\", čime mijenjate\n"
"jezik koji koristi čitav sistem. Izvršavanjem te naredbe kao običan\n"
"korisnik mijenjate jezičke postavke samo za tog konkretnog korisnika."

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Espanol"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"Obično DrakX nema problema da odredi broj dugmadi na vašem mišu.\n"
"Ako ima, pretpostaviće da imate miš sa dva dugmeta i podesiće simulaciju\n"
"trećeg dugmeta. Treće dugme se može postići na mišu sa dva dugmeta\n"
"istovremenim klikom na lijevo i desno dugme miša. DrakX će automatski\n"
"znati da li miš koristi PS/2, serijski ili USB interfejs.\n"
"\n"
"Ako imate miš sa tri dugmeta bez točkića, možete izabrati tip miša pod\n"
"imenom \"%s\". DrakX će zatim konfigurisati vašeg miša tako da može\n"
"simulirati rad točkića trećim dugmetom. Da biste ovo postigli, držite\n"
"srednje dugme miša i pomjerajte ga gore-dolje.\n"
"\n"
"Ako iz nekog razloga želite navesti drugačiji tip miša, izaberite ga sa\n"
"ponuđene liste.\n"
"\n"
"Možete izabrati stavku \"%s\" da izaberete ``opšti'' tip miša koji bi\n"
"trebao raditi sa skoro svim miševima.\n"
"Ako izaberete miš različit od ponuđenog, biće prikazan testni ekran.\n"
"Koristite miš i točkić da potvrdite da su postavke tačne i da miš radi\n"
"ispravno. Ako miš ne radi kako treba, pritisnite razmaknicu ili tipku Enter\n"
"da prekinete test i vratite se na listu izbora.\n"
"\n"
"Miševi sa točkićem često nisu prepoznati automatski, stoga trebate izabrati\n"
"miš na listi. Pazite da izaberete odgovarajući port na koji je vaš miš\n"
"priključen. Nakon izbora miša i pritiska na dugme \"%s\", na ekranu će\n"
"biti prikazana slika miša. Pomjerajte točkić miša kako biste provjerili da "
"li\n"
"ispravno funkcioniše. Kada vidite da se točkić na ekranu pomjera onako\n"
"kako vi vrtite stvarni točkić, provjerite dugmad i provjerite da li se "
"pokazivač\n"
"na ekranu pomjera onako kako vi pomjerate miš."

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "sa simulacijom točkića"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Univerzalni | Bilo koji PS/2 ili USB miš"

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Molim izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sistema: trebate\n"
"unijeti \"root\" šifru, \"Root\" je sistemski administrator i jedini\n"
"korisnik kojem je dozvoljeno da updatuje sistem, dodaje druge korisnike,\n"
"mijenja konfiguraciju sistema itd. Ukratko, \"root\" može raditi sve! Stoga\n"
"trebate izabrati šifru koju je teško pogoditi - DrakX će vam reći da li je "
"šifra\n"
"koju ste odabrali prejednostavna. Kao što možete vidjeti, niste prisiljeni "
"da\n"
"unesete šifru, ali vam savjetujemo da to uradite. GNU/Linux je podložan\n"
"operatorskim greškama kao i bilo koji drugi operativni sistem. Pošto\n"
"\"root\" može prevazići sva ograničenja i nenamjerno pobrisati sve podatke\n"
"na particijama neoprezno im pristupajući, važno je da je teško postati \"root"
"\".\n"
"\n"
"Šifra treba biti kombinacija alfanumeričkih znakova i biti barem 8 znakova\n"
"duga. Nikad ne zapisujte \"root\" šifru -- time vaš sistem postaje lagano\n"
"kompromitovati.\n"
"\n"
"Jedan izuzetak: ne dozvolite da šifra bude preduga ili prekomplikovana\n"
"pošto ćete je morati zapamtiti!\n"
"\n"
"Šifra neće biti prikazana na ekranu dok je unosite. Da bismo smanjili\n"
"mogućnost greške zbog kucanja naslijepo, moraćete unijeti šifru dva puta.\n"
"Ako nekim slučajem ponovite istu grešku dva puta, ovu ''neispravnu'' šifru\n"
"trebate koristiti prilikom prve prijave kao \"root\".\n"
"\n"
"Ako želite da pristup ovom računaru bude kontroliran pomoću servera za\n"
"provjeru identiteta (authentication), kliknite na dugme \"%s\".\n"
"\n"
"Ako vaša mreža koristi LDAP, NIS ili PDC Windows domen servise za\n"
"provjeru identiteta, izaberite odgovarajući kao \"%s\". Ako ne znate koji\n"
"koristiti, pitajte vašeg mrežnog administratora.\n"
"\n"
"Ako imate problema sa pamćenjem šifara, ako vaš računar neće biti spojen\n"
"na Internet i ako apsolutno vjerujete svakome ko mu ima fizički pristup,\n"
"možete izabrati opciju \"%s\"."

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "provjera autentičnosti"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
"\"Boot loader\" je mali program koji se pokreće prilikom paljenja računara.\n"
"On je odgovoran za izbor i pokretanje operativnog sistema. Faza izbora boot\n"
"loadera je obično automatizovana. DrakX će analizirati boot sektor diska i\n"
"postupati u skladu s onim što zatekne tamo:\n"
"\n"
" * ako pronađe Windows boot sektor, biće zamijenjen sa GRUB/LILO boot\n"
"sektorom. Na ovaj način bićete u mogućnosti da učitate ili GNU/Linux ili\n"
"neki drugi OS koji je instaliran na vašem računaru.\n"
"\n"
" * ako pronađe GRUB ili LILO boot sektor, zamijeniće ga novim.\n"
"\n"
"Ako ne može donijeti odluku, DrakX će vas pitati gdje da postavi\n"
"bootloader. Generalno, \"%s\" je najsigurnije mjesto. Birajući \"%s\"\n"
"izbjeći ćete instalaciju bootloadera. Koristite ovu opciju samo ako znate\n"
"šta radite."

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"Sada je vrijeme da izaberete sistem štampe za vaš računar. Drugi\n"
"operativni sistemi vam možda nude jedan, ali Mandriva Linux nudi\n"
"dva. Svaki od ovih sistema je najbolji za određenu vrstu konfiguracije.\n"
"\n"
"* \"%s\" -- skraćeno za ``štampaj i nemoj stavljati u red'' (print, do not\n"
"queue) je najbolji izbor ako imate direktnu vezu na štampač, želite izlaz\n"
"za paniku u slučajevima zaglavljivanja papira i nemate mrežne štampače.\n"
"(\"%s\" može riješiti samo vrlo jednostavne mrežne slučajeve i pomalo je\n"
"spor kada se koristi sa mrežama.) Preporučujemo da koristite \"pdq\" ako\n"
"je ovo vaše prvo iskustvo sa GNU/Linuxom.\n"
"\n"
"* \"%s\" znači ``Common UNIX Printing System'' (uobičajeni UNIX sistem "
"štampe)\n"
"je odličan izbor za štampanje na štampač koji se nalazi lokalno ili s druge\n"
"strane planete. Vrlo ga je jednostavno podesiti i može služiti kao server "
"ili\n"
"klijent za prastari \"lpd\" sistem štampe, tako da je kompatibilan sa "
"starijim\n"
"operativnim sistemima kojima možda još trebaju usluge štampanja. Mada je\n"
"vrlo moćan, osnovno podešavanje je skoro jednako lagano kao za \"pdq\".\n"
"Ako želite simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-"
"lpd\"\n"
"servis. \"%s\" uključuje grafičke alate za štampanje ili izbor opcija "
"štampača,\n"
"te za upravljanje štampačem.\n"
"\n"
"Ako sada napravite izbor, pa kasnije zaključite da vam se ne sviđa izabrani\n"
"sistem štampe, možete ga promijeniti pokretanjem PrinterDrake iz\n"
"Mandriva Linux Kontrolnog centra i klikanjem na dugme \"%s\"."

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Ekspert"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX će najprije potražiti sve IDE uređaje prisutne na vašem računaru.\n"
"Također će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako\n"
"SCSI kartica bude pronađena, DrakX će automatski instalirati odgovarajući\n"
"drajver.\n"
"\n"
"Budući da pronalaženje hardware-a nikad nije savršeno, DrakX možda neće\n"
"pronaći vaše hard diskove. Ako se to desi, moraćete ih navesti ručno.\n"
"\n"
"Ako je potrebno da ručno odaberete PCI SCSI adapter, DrakX će vas pitati\n"
"da li želite navesti neke opcije za njega. Trebate dopustiti DrakXu da\n"
"ispita hardware za neke opcije specifične za tu karticu. Obično DrakX "
"prolazi\n"
"kroz ovaj korak bez problema.\n"
"\n"
"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
"ručno navesti opcije za drajver."

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": ako je na vašem sistemu otkrivena zvučna kartica, ona će\n"
"biti prikazana ovdje. Ako primijetite da prikazana zvučna kartica nije ona\n"
"koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki\n"
"drugi drajver."

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1016
#: install_steps_interactive.pm:1033
#, c-format
msgid "Sound card"
msgstr "Zvučna kartica"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"DrakX će vam pružiti sažetak raznih informacija koje su prikupljene\n"
"o vašem sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
"neke ili sve od navedenih stavki. Pojedinačna stavka se sastoji od\n"
"onoga što je potrebno podesiti, nakon čega slijedi kraći sažetak trenutne\n"
"konfiguracije. Da biste ovo izmijenili, kliknite na odgovarajuće dugme \"%s"
"\".\n"
"\n"
"* \"%s\": provjerite trenutnu mapu tastature i izmijenite je ako je\n"
" potrebno.\n"
"\n"
"* \"%s\": provjerite trenutno izabranu državu. Ako se nalazite negdje\n"
"drugo, kliknite na dugme \"%s\" i izaberite neku drugu. Ako se vaša\n"
"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"%s\" da biste\n"
"dobili cjelokupnu listu zemalja.\n"
"\n"
"* \"%s\": DrakX automatski određuje vašu vremensku zonu\n"
"na osnovu države koju ste izabrali. Možete kliknuti na dugme \"%s\"\n"
"ako ovo nije ispravno.\n"
"\n"
"* \"%s\": provjerite trenutnu konfiguraciju miša i klinite na dugme da je\n"
"promijenite ako je to potrebno.\"\n"
"\n"
"* \"%s\": klikanjem na dugme \"%s\" otvoriće se čarobnjak za\n"
"podešavanje štampača. Pogledajte odgovarajuće poglavlje ''Vodiča za\n"
"početnike'' za više informacija o podešavanju novog štampača. Interfejs\n"
"koji je prikazan u našem priručniku je sličan onom koji će biti korišten "
"tokom instalacije.\n"
"\n"
"* \"%s\": ako je na vašem sistemu otkrivena zvučna kartica, ona će\n"
"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
"koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki\n"
"drugi drajver.\n"
"\n"
"* \"%s\": ako je na vašem sistemu prepoznata TV kartica, biće\n"
"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
"dugme \"%s\" kako biste pokušali podesiti je ručno.\n"
"\n"
" * \"%s\": možete kliknuti na \"%s\" da promijenite parametre pridružene\n"
"kartici ako mislite da je konfiguracija neispravna.\n"
"\n"
"* \"%s\": DrakX će podesiti vaš grafički interfejs za rad na\n"
"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
"na dugme \"%s\" kako biste drugačije podesili vaš interfejs.\n"
"\n"
"* \"%s\": ako želite, možete podesiti vaš Internet pristup ili pristup\n"
"lokalnoj mreži. Pogledajte štampanu dokumentaciju ili koristite\n"
"Mandriva Linux Kontrolni centar nakon što je završena instalacija\n"
"kako biste koristili ugrađenu pomoć. \n"
" * \"%s\": omogućuje vam da podesite adrese HTTP i FTP proxyja ako\n"
"se računar na koji instalirate nalazi iza proxy servera.\n"
"\n"
"* \"%s\": ovdje možete promijeniti nivo sigurnosti sistema koji\n"
"je podešen u prethodnom koraku ().\n"
"\n"
"* \"%s\": ako planirate povezati vaš računar na Internet, pametno je\n"
"zaštititi ga od upada postavljanjem firewalla. Pogledajte odgovarajuće\n"
"poglavlje ''Vodiča za početnike'' za detalje o podešavanju firewalla.\n"
"\n"
"* \"%s\": ako želite promijeniti postavke bootloadera, kliknite na to\n"
"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike. Pogledajte\n"
"štampanu dokumentaciju ili pomoć za bootloader konfiguraciju uključenu\n"
"u Mandriva Linux Kontrolni centar.\n"
"\n"
"* \"%s\": ovdje možete fino podešavati koji servisi će biti pokrenuti\n"
"na vašem računaru. Ako planirate koristiti ovaj računar kao server,\n"
"dobra je ideja još jednom pregledati ove postavke."

#: help.pm:855 install_steps_interactive.pm:880
#: install_steps_interactive.pm:975 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Vremenska zona"

#: help.pm:855 install_steps_interactive.pm:1049
#, c-format
msgid "TV card"
msgstr "TV kartica"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "ISDN kartica"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Grafički interfejs"

#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1067
#: standalone/drakbackup:2040
#, c-format
msgid "Network"
msgstr "Mreža"

#: help.pm:855 install_steps_interactive.pm:1079
#, c-format
msgid "Proxies"
msgstr "Proxy-ji"

#: help.pm:855 install_steps_interactive.pm:1090
#, c-format
msgid "Security Level"
msgstr "Sigurnosni nivo"

#: help.pm:855 install_steps_interactive.pm:1104 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr "Firewall"

#: help.pm:855 install_steps_interactive.pm:1120
#, c-format
msgid "Bootloader"
msgstr "Bootloader"

#: help.pm:855 install_steps_interactive.pm:1133 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "Servisi"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu\n"
"Mandriva Linux particiju. Budite pažljivi, svi podaci koji se nalaze na\n"
"njemu će biti izgubljeni i neće se moći vratiti!"

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Kliknite na \"%s\" ako želite obrisati sve podatke i particije koje\n"
"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
"\"%s\" nećete moći vratiti podatke i particije koji se trenutno nalaze\n"
"na ovom hard disku, uključujući i sve Windows podatke.\n"
"\n"
"Kliknite na \"%s\" da prekinete ovu operaciju bez gubitka\n"
"podataka i particija na ovom hard disku."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Dalje ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Nazad"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Ne mogu pristupiti kernelskim modulima koji odgovaraju vašem kernelu "
"(nedostaje datoteka %s), što obično znači da je vaša boot disketa zastarjela "
"u odnosu na instalacioni medij (napravite noviju boot disketu)"

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Morate takođe formatirati i %s"

#: install_any.pm:406
#, c-format
msgid "Do you have further supplementary media?"
msgstr "Imate li neke dodatne medije?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:409
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"Sljedeći mediji su pronađeni i biće korišteni prilikom instalacije: %s.\n"
"\n"
"\n"
"Želite li podesiti ijedan dodatni instalacioni medij?"

#: install_any.pm:422 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "sa CDROMa"

#: install_any.pm:422
#, c-format
msgid "Network (HTTP)"
msgstr "Mreža (HTTP)"

#: install_any.pm:422
#, c-format
msgid "Network (FTP)"
msgstr "Mreža (FTP)"

#: install_any.pm:422
#, c-format
msgid "Network (NFS)"
msgstr ""

#: install_any.pm:452
#, c-format
msgid "Insert the CD 1 again"
msgstr "Ubacite ponovo CD 1"

#: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114
#, c-format
msgid "No device found"
msgstr "Nije pronađen nijedan uređaj"

#: install_any.pm:483
#, c-format
msgid "Insert the CD"
msgstr "Ubacite CD"

#: install_any.pm:488
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "Ne mogu demontirati CD-ROM"

#: install_any.pm:521 install_any.pm:542
#, c-format
msgid "URL of the mirror?"
msgstr "URL mirrora?"

#: install_any.pm:526
#, c-format
msgid "NFS setup"
msgstr ""

#: install_any.pm:526
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:527
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:527 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "Direktorij"

#: install_any.pm:580
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Ne mogu pronaći hdlist datoteku na ovom mirroru"

#: install_any.pm:657
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr ""

#: install_any.pm:699
#, c-format
msgid "Looking at packages already installed..."
msgstr "Tražim već instalirane pakete..."

#: install_any.pm:703
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Pronalazim pakete za unaprjeđenje..."

#: install_any.pm:781
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Promijenite vaš CD-ROM!\n"
"Molim ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite \"U redu"
"\" kad ste spremni."

#: install_any.pm:793
#, c-format
msgid "Copying in progress"
msgstr "Kopiranje u toku"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:935
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Izabrali ste sljedeći server (servere): %s\n"
"\n"
"\n"
"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
"sigurnosnih\n"
"problema, ali možda će biti pronađeni u budućnosti. Ako se to desi, morate "
"ih\n"
"upgrade-ovati što prije bude moguće.\n"
"\n"
"\n"
"Da li zaista želite instalirati ove servere?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:958
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Da bi se omogućilo unaprjeđenje vašeg sistema, biće uklonjeni sljedeći "
"paketi: %s\n"
"\n"
"\n"
"Želite li zaista deinstalirati ove pakete?\n"

#: install_any.pm:1394 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "Greška u čitanju datoteke %s"

#: install_any.pm:1628
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "Sljedeći diskovi su preimenovani:"

#: install_any.pm:1630
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (ranije pod imenom %s)"

#: install_any.pm:1670
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
"kreirati novi file sistemi. Molim provjerite vaš hardware i pronađite uzrok "
"greške"

#: install_any.pm:1714
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1714
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1714
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1737
#, c-format
msgid "Please choose a media"
msgstr "Molim izaberite medij"

#: install_any.pm:1753
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "Datoteka već postoji. Želite li pisati preko nje?"

#: install_any.pm:1757
#, c-format
msgid "Permission denied"
msgstr "Nemate dozvolu"

#: install_any.pm:1806
#, c-format
msgid "Bad NFS name"
msgstr ""

#: install_any.pm:1827
#, c-format
msgid "Bad media %s"
msgstr "Neispravan medij %s"

#: install_any.pm:1877
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"

#: install_any.pm:1884
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Snimanje ekrana će biti dostupno nakon što instalirate u %s"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Instalacija sistema"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Podešavanje sistema"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Neki dio hardware-a na vašem računaru zahtjeva ``vlasničke'' drajvere za "
"rad.\n"
"Možete naći više podataka o njima na: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Morate imati root particiju.\n"
"Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).\n"
"Zatim izaberite opciju ``Tačka montiranja'' i postavite je na `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Nemate nijednu swap particiju\n"
"\n"
"Svejedno nastavi?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Morate imati FAT particiju montiranu na /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Koristi postojeću particiju"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Nema nijedne postojeće particije za upotrebu"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Koristi Windows particiju za loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Koju particiju želite koristiti za Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Izaberite veličine"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Veličina root particije u MB:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Veličina swap particije u MB:"

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
"dovoljno prostora)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Kojoj particiji želite promijeniti veličinu?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT resizer ne može izmijeniti vašu particiju, \n"
"došlo je do sljedeće greške: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Izračunavam veličinu Windows particije"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"Vaša Windows particija je previše fragmentirana. Molim restartujte vaš "
"računar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandriva "
"Linux instalaciju."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"UPOZORENJE!\n"
"\n"
"DrakX će sada promijeniti veličinu vaše Windows particije. Budite pažljivi,\n"
"ova operacija je opasna. Ako to već niste uradili, najprije napustite\n"
"instalaciju, izvršite naredbu \"chkdsk c:\" iz Command Prompt-a pod\n"
"Windowsom (obratite pažnju da izvršavanje grafičkog programa \"scandisk\"\n"
"nije dovoljno, trebate koristiti \"chkdsk\" u komandnom upitu!), opcionalno\n"
"pokrenite \"defrag\", zatim ponovo pokrenite instalaciju. Također biste\n"
"trebali spasiti sve podatke.\n"
"Kada ste sigurni, kliknite na \"U redu\"."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Koju veličinu želite da sačuvate za Windows na"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "particiji %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Smanjujem Windows particiju"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Smanjivanje FAT particije nije uspjelo: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo "
"dovoljno prostora)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Ukloni Windows(TM)"

#: install_interactive.pm:213
#, fuzzy, c-format
msgid "Erase and use entire disk"
msgstr "Pobriši čitav disk"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Imate više od jednog hard diska. Na koji od njih želite instalirati Linux?"

#: install_interactive.pm:221
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"

#: install_interactive.pm:236
#, c-format
msgid "Use fdisk"
msgstr "Koristi fdisk"

#: install_interactive.pm:239
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Sada možete particionirati %s.\n"
"Kada završite, ne zaboravite spasiti sa `w'"

#: install_interactive.pm:275
#, c-format
msgid "I can not find any room for installing"
msgstr "Ne mogu naći dovoljno prostora za instalaciju"

#: install_interactive.pm:279
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:"

#: install_interactive.pm:287
#, c-format
msgid "Partitioning failed: %s"
msgstr "Particioniranje nije uspjelo: %s"

#: install_interactive.pm:294
#, c-format
msgid "Bringing up the network"
msgstr "Pokrećem mrežu"

#: install_interactive.pm:299
#, c-format
msgid "Bringing down the network"
msgstr "Zaustavljam mrežu"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""
"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
"(engleskom)\n"
"obliku.\n"
"\n"
"\n"
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"Upozorenje: Slobodan softver ne mora obavezno biti slobodan od patenata\n"
"i neki elementi slobodnog softvera mogu biti obuhvaćeni patentima u vašoj\n"
"zemlji. Npr. MP3 dekoderi koji su uključeni možda zahtijevaju licencu za "
"daljnje\n"
"korištenje (za više detalja, pogledajte http://www.mp3licensing.com). Ako "
"niste\n"
"sigurni da li se patent odnosi na vas, provjerite vaše lokalne zakone."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Pažnja\n"
"\n"
"Molim pročitajte pažljivo uslove licence ispod. Ako se ne slažete sa bilo\n"
"kojim dijelom, nije vam dozvoljeno da instalirate naredne CD medije. "
"Pritisnite\n"
"dugme 'Ne prihvatam' da biste nastavili sa instalacijom bez korištenja ovih "
"medija.\n"
"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
"obliku.\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"Čestitamo, instalacija je završena.\n"
"Uklonite boot medij i pritisnite Enter da restartujete računar.\n"
"\n"
"\n"
"Za informacije o ispravkama koje su dostupne za ovu verziju Mandriva "
"Linuxa,\n"
"pogledajte Errata koja je dostupna na:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n"
"\"Nakon instalacije\" vašeg zvaničnog Mandriva Linux Priručnika za upotrebu."

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "Dvostruka tačka montiranja %s"

#: install_steps.pm:481
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Neki bitni paketi nisu ispravno instalirani.\n"
"Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.\n"
"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl media/main/*."
"rpm\"\n"

#: install_steps_auto_install.pm:68 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Prelazim na korak `%s'\n"

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Vašem sistemu ponestaje resursa. Možda imate neki problem sa instalacijom\n"
"Mandriva Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za "
"ovo,\n"
"pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."

#: install_steps_gtk.pm:211 install_steps_interactive.pm:630
#, c-format
msgid "Package Group Selection"
msgstr "Izbor grupe paketa"

#: install_steps_gtk.pm:254 install_steps_interactive.pm:573
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukupna veličina: %d / %d MB"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "Neispravan paket"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "Verzija: "

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "Veličina: "

#: install_steps_gtk.pm:302
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:303
#, c-format
msgid "Importance: "
msgstr "Značaj: "

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "Ne možete izabrati/isključiti ovaj paket"

#: install_steps_gtk.pm:340 network/thirdparty.pm:331
#, c-format
msgid "due to missing %s"
msgstr "zbog nedostajućeg %s"

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr "zbog nezadovoljenog %s"

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr "pokušavam promovirati %s"

#: install_steps_gtk.pm:343
#, c-format
msgid "in order to keep %s"
msgstr "kako biste zadržali %s"

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega"

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "Sljedeći paketi će biti instalirani"

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "Sljedeći paketi će biti uklonjeni"

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Ovo je obavezan paket, ne može biti isključen"

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "Ne možete isključiti ovaj paket. On je već instaliran"

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Ovaj paket mora biti unaprijeđen\n"
"Jeste li sigurni da ga želite isključiti?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "Ne možete isključiti ovaj paket. On mora biti unaprijeđen"

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr "Automatski prikaži izabrane pakete"

#: install_steps_gtk.pm:394
#, c-format
msgid "Load/Save selection"
msgstr "Izbor za čitanje/snimanje"

#: install_steps_gtk.pm:395
#, c-format
msgid "Updating package selection"
msgstr "Osvježavam izbor paketa"

#: install_steps_gtk.pm:400
#, c-format
msgid "Minimal install"
msgstr "Minimalna instalacija"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:492
#, c-format
msgid "Choose the packages you want to install"
msgstr "Izaberite pakete koje želite instalirati"

#: install_steps_gtk.pm:431 install_steps_interactive.pm:716
#, c-format
msgid "Installing"
msgstr "Instaliram"

#: install_steps_gtk.pm:457
#, c-format
msgid "No details"
msgstr "Sakrij detalje"

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "Preostalo vremena "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "Procjenjujem"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d paketa"

#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:740
#, c-format
msgid "Refuse"
msgstr "Ne prihvatam"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:744
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Promijenite vaš CD-ROM!\n"
"Molim ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite \"U redu"
"\" kad ste spremni.\n"
"Ako ga nemate, pritisnite \"Odustani\" da preskočite instalaciju sa tog CD-"
"ROMa."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:755
#, c-format
msgid "There was an error ordering packages:"
msgstr "Došlo je do greške pri naručivanju paketa:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:759
#, c-format
msgid "There was an error installing packages:"
msgstr "Došlo je do greške kod instaliranja paketa:"

#: install_steps_gtk.pm:560 install_steps_interactive.pm:755
#: install_steps_interactive.pm:759
#, c-format
msgid "Go on anyway?"
msgstr "Svejedno nastavi?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:935 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Ukratko"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:931
#: install_steps_interactive.pm:1080
#, c-format
msgid "not configured"
msgstr "nije podešeno"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"Pronađeni su sljedeći instalacioni mediji.\n"
"Ako želite preskočiti neke od njih, možete ih isključiti sada."

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""
"Imate mogućnost da kopirate sadržaj CDova na hard disk prije instalacije.\n"
"Zatim će instalacija biti nastavljena sa hard diska, a paketi će ostati "
"dostupni nakon što sistem bude instaliran."

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr "Kopiraj čitave CDove"

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "Licencni ugovor"

#: install_steps_interactive.pm:89
#, c-format
msgid "Release Notes"
msgstr "Napomene izdanja"

#: install_steps_interactive.pm:120
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Molim izaberite izgled vaše tastature."

#: install_steps_interactive.pm:122
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "Ovdje je puna lista svih dostupnih tastatura"

#: install_steps_interactive.pm:152
#, c-format
msgid "Install/Upgrade"
msgstr "Instaliraj/Unaprijedi"

#: install_steps_interactive.pm:153
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Da li je ovo instalacija ili unaprjeđenje?"

#: install_steps_interactive.pm:159
#, c-format
msgid "Upgrade %s"
msgstr "Unaprijedi %s"

#: install_steps_interactive.pm:172
#, c-format
msgid "Encryption key for %s"
msgstr "Ključ enkripcije za %s"

#: install_steps_interactive.pm:195
#, c-format
msgid "Please choose your type of mouse."
msgstr "Molim izaberite vrstu vašeg miša."

#: install_steps_interactive.pm:196
#, c-format
msgid "Mouse choice"
msgstr ""

#: install_steps_interactive.pm:205 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Port miša"

#: install_steps_interactive.pm:206 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Molim izaberite na kojem serijskom portu je spojen vaš miš."

#: install_steps_interactive.pm:216
#, c-format
msgid "Buttons emulation"
msgstr "Emulacija dugmeta"

#: install_steps_interactive.pm:218
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulacija 2 dugmeta"

#: install_steps_interactive.pm:219
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulacija 3 dugmeta"

#: install_steps_interactive.pm:240
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:240
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Podešavam PCMCIA kartice..."

#: install_steps_interactive.pm:247
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:247
#, c-format
msgid "Configuring IDE"
msgstr "Podešavam IDE"

#: install_steps_interactive.pm:267
#, c-format
msgid "No partition available"
msgstr "Nema dostupnih particija"

#: install_steps_interactive.pm:270
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Pretražujem particije da nađem tačke montiranja"

#: install_steps_interactive.pm:277
#, c-format
msgid "Choose the mount points"
msgstr "Izaberite tačke montiranja"

#: install_steps_interactive.pm:325
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap "
"particiju u DiskDrake-u"

#: install_steps_interactive.pm:330
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""
"Trebate napraviti PPC PReP Boot bootstrap! Instalacija će nastaviti, ali da "
"biste bootali vaš sistem, morate kreirati bootstrap particiju u DiskDrake-u"

#: install_steps_interactive.pm:366
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Izaberite particije koje želite formatirati"

#: install_steps_interactive.pm:368
#, c-format
msgid "Check bad blocks?"
msgstr "Provjeri loše blokove?"

#: install_steps_interactive.pm:396
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Nisam uspio provjeriti datotečni sistem %s. Želite li popraviti greške? "
"(pažnja, možete izgubiti podatke)"

#: install_steps_interactive.pm:399
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nemam dovoljno swap prostora da dovršim instalaciju, molim dodajte još"

#: install_steps_interactive.pm:408
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Tražim dostupne pakete i izgrađujem rpm bazu podataka..."

#: install_steps_interactive.pm:409 install_steps_interactive.pm:461
#, c-format
msgid "Looking for available packages..."
msgstr "Tražim dostupne pakete..."

#: install_steps_interactive.pm:430 install_steps_interactive.pm:835
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"

#: install_steps_interactive.pm:470
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
"(%d > %d)"

#: install_steps_interactive.pm:504
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"Molim izaberite da li ćete učitati ili snimiti izbor paketa.\n"
"Format je isti kao i diskete koje generiše auto_install."

#: install_steps_interactive.pm:506
#, c-format
msgid "Load"
msgstr "Učitaj"

#: install_steps_interactive.pm:506 standalone/drakbackup:4055
#: standalone/drakbackup:4125 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "Snimi"

#: install_steps_interactive.pm:514
#, c-format
msgid "Bad file"
msgstr "Neispravna datoteka"

#: install_steps_interactive.pm:587
#, c-format
msgid "Selected size is larger than available space"
msgstr "Izabrana veličina je veća od slobodnog prostora"

#: install_steps_interactive.pm:602
#, c-format
msgid "Type of install"
msgstr "Vrsta instalacije"

#: install_steps_interactive.pm:603
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Niste izabrali nijednu grupu paketa\n"
"Molim izaberite minimalnu instalaciju koju želite:"

#: install_steps_interactive.pm:607
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Sa osnovnom dokumentacijom (preporučeno)"

#: install_steps_interactive.pm:608
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"

#: install_steps_interactive.pm:647 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Svi"

#: install_steps_interactive.pm:686
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ako imate sve CDe na listi, kliknite na U redu.\n"
"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na U redu."

#: install_steps_interactive.pm:691
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "CD-ROM pod oznakom \"%s\""

#: install_steps_interactive.pm:716
#, c-format
msgid "Preparing installation"
msgstr "Pripremam instalaciju"

#: install_steps_interactive.pm:724
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instaliram paket %s\n"
"%d%%"

#: install_steps_interactive.pm:773
#, c-format
msgid "Post-install configuration"
msgstr "Post-instalacijsko podešavanje"

#: install_steps_interactive.pm:780
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:808
#, c-format
msgid "Updates"
msgstr "Updates"

#: install_steps_interactive.pm:809
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"Sada imate mogućnost da dobavite sa Interneta nove verzije paketa koji\n"
"su izašli nakon što je distribucija objavljena. Među njima su sigurnosne "
"zakrpe\n"
"i ispravke bugova.\n"
"\n"
"Da biste izvršili download, potrebno je da podesite Internet konekciju.\n"
"\n"
"Da li želite instalirati update-ovane pakete ?"

#: install_steps_interactive.pm:830
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr ""
"Kontaktiram Mandriva Linux web stranicu da bih saznao listu dostupnih "
"mirrora..."

#: install_steps_interactive.pm:849
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."

#: install_steps_interactive.pm:853
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Ne mogu pristupiti mirroru %s"

#: install_steps_interactive.pm:853
#, c-format
msgid "Would you like to try again?"
msgstr "Želite li ponovo pokušati?"

#: install_steps_interactive.pm:880 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "Koja je vaša vremenska zona?"

#: install_steps_interactive.pm:885
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatska sinhronizacija vremena (koristeći NTP)"

#: install_steps_interactive.pm:893
#, c-format
msgid "NTP Server"
msgstr "NTP server"

#: install_steps_interactive.pm:948 install_steps_interactive.pm:956
#: install_steps_interactive.pm:974 install_steps_interactive.pm:981
#: install_steps_interactive.pm:1132 services.pm:133
#: standalone/drakbackup:1585
#, c-format
msgid "System"
msgstr "Sistem"

#: install_steps_interactive.pm:988 install_steps_interactive.pm:1015
#: install_steps_interactive.pm:1032 install_steps_interactive.pm:1048
#: install_steps_interactive.pm:1059
#, c-format
msgid "Hardware"
msgstr "Hardware"

#: install_steps_interactive.pm:994 install_steps_interactive.pm:1003
#, c-format
msgid "Remote CUPS server"
msgstr "Udaljeni CUPS server"

#: install_steps_interactive.pm:994
#, c-format
msgid "No printer"
msgstr "Nema štampača"

#: install_steps_interactive.pm:1036
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Imate li ISA zvučnu karticu?"

#: install_steps_interactive.pm:1038
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"Pokrenite \"alsaconf\" ili \"sndconfig\" poslije instalacije kako biste "
"podesili vašu zvučnu karticu"

#: install_steps_interactive.pm:1040
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"

#: install_steps_interactive.pm:1060
#, c-format
msgid "Graphical interface"
msgstr "Grafički interfejs"

#: install_steps_interactive.pm:1066 install_steps_interactive.pm:1078
#, c-format
msgid "Network & Internet"
msgstr "Mreža i Internet"

#: install_steps_interactive.pm:1080
#, c-format
msgid "configured"
msgstr "podešeno"

#: install_steps_interactive.pm:1089 install_steps_interactive.pm:1103
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "Sigurnost"

#: install_steps_interactive.pm:1108
#, c-format
msgid "activated"
msgstr "aktiviran"

#: install_steps_interactive.pm:1108
#, c-format
msgid "disabled"
msgstr "isključen"

#: install_steps_interactive.pm:1119
#, c-format
msgid "Boot"
msgstr "Boot"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1123 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s na %s"

#: install_steps_interactive.pm:1137 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Servisi: %d aktiviran za %d registrovan"

#: install_steps_interactive.pm:1149
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Niste podesili X. Sigurno želite uraditi ovo?"

#: install_steps_interactive.pm:1230
#, c-format
msgid "Preparing bootloader..."
msgstr "Pripremam bootloader..."

#: install_steps_interactive.pm:1240
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""
"Izgleda da imate OldWorld ili Unknown računar, yaboot bootloader neće raditi "
"kod vas. Instalacija će se nastaviti, ali ćete morati koristiti BootX ili "
"neki drugi način za bootanje vašeg računara. Argument kernela za root fs je: "
"root=%s"

#: install_steps_interactive.pm:1246
#, c-format
msgid "Do you want to use aboot?"
msgstr "Da li želite koristiti aboot?"

#: install_steps_interactive.pm:1249
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Greška u instaliranju aboota, \n"
"da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?"

#: install_steps_interactive.pm:1266
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"Na ovom sigurnosnom nivou, pristup datotekama na Windows particijama je "
"dozvoljen samo administratoru."

#: install_steps_interactive.pm:1295 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Ubacite praznu disketu u jedinicu %s"

#: install_steps_interactive.pm:1300
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Molim ubacite sljedeću disketu za drajvere"

#: install_steps_interactive.pm:1302
#, c-format
msgid "Creating auto install floppy..."
msgstr "Pravim auto instalacijsku disketu..."

#: install_steps_interactive.pm:1314
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Neki koraci nisu dovršeni.\n"
"\n"
"Da li zaista želite izaći sada?"

#: install_steps_interactive.pm:1324 standalone/draksambashare:422
#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
#: standalone/logdrake:452 standalone/logdrake:458
#, c-format
msgid "Congratulations"
msgstr "Čestitamo"

#: install_steps_interactive.pm:1332 install_steps_interactive.pm:1333
#, c-format
msgid "Generate auto install floppy"
msgstr "Napravi autoinstalacijsku disketu"

#: install_steps_interactive.pm:1334
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Ova auto instalacija može biti potpuno automatizovana ako želite,\n"
"u kojem slučaju će ona preuzeti hard disk!!\n"
"(ovo je namjenjeno za instaliranje na drugi računar).\n"
"\n"
"Možda ćete radije željeti ponoviti instalaciju.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Mandriva Linux instalacija %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran "

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "Izaberi datoteku"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1129 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "Dodaj"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1086
#: standalone/draksambashare:1139 standalone/draksambashare:1178
#, c-format
msgid "Modify"
msgstr "Izmijeni"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1087
#: standalone/draksambashare:1147 standalone/draksambashare:1186
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "Pobriši"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "Manje opcija"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "Kraj"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "Uradi"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Pogrešan izbor, pokušajte ponovo\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Vaš izbor? (podrazumjevano %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Stavke koje morate popuniti:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Vaš izbor? (0/1, podrazumjevano %s)"

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Dugme '%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Da li želite kliknuti na ovo dugme?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Vaš izbor? (podrazumjevano '%s' %s)"

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " unesite `void' za prazan unos"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Postoji mnogo stvari od kojih možete izabrati (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Molim unesite prvi broj od deset koji želite izmjeniti,\n"
"ili samo pritisnite Enter za nastavak.\n"
"Vaš izbor?"

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Primjetite, natpis je promijenjen:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Ponovo pošalji"

#: keyboard.pm:171 keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "Češka (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "Njemačka"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:174 keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "Španska"

#: keyboard.pm:175 keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "Finska"

#: keyboard.pm:176 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "Francuska"

#: keyboard.pm:177 keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "Norveška"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "Poljska"

#: keyboard.pm:179 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "Ruska"

#: keyboard.pm:181 keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "Švedska"

#: keyboard.pm:182 keyboard.pm:317
#, c-format
msgid "UK keyboard"
msgstr "UK tastatura"

#: keyboard.pm:183 keyboard.pm:320
#, c-format
msgid "US keyboard"
msgstr "US tastatura"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Albanska"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "Armenska (stara)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "Armenska (pisaća mašina)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "Armenska (fonetska)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "Arapska"

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Azerbejdžanska (latinica)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "Belgijska"

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "Bengalska (Inscript raspored)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "Bengalska (Probhat raspored)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "Bugarska (fonetska)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "Bugarska (BDS)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "Brazilska (ABNT-2)"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "Bosanska"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Bjeloruska"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "Švicarska (njemački raspored)"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "Švicarska (francuski raspored)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Cherokee syllabics"

#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "Češka (QWERTY)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "Njemačka (bez mrtvih tipki)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "Devanagari"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "Danska"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Esperanto)"

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (Francuska)"

#: keyboard.pm:215
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (UK)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (Norveška)"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (Poljska)"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (Švedska)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Dzongkha/Tibetanska"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Estonska"

#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "Farska"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "Gruzijska (\"ruski\" raspored)"

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "Gruzijska (\"latinični\" raspored)"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "Grčka"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "Grčka (politonska)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "Gujarati"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "Gurmukhi"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Hrvatska"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "Mađarska"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "Irska"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "Izraelska"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "Izraelska (fonetska)"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Iranska"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Islandska"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "Italijanska"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "Inuktitut"

#: keyboard.pm:244
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "Japanska 106 tipki"

#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Kannada"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "Korejanska"

#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "Kurdska (arapsko pismo)"

#: keyboard.pm:251
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Kirgiška"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "Latino-Američka"

#: keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "Laoska"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Litvanska AZERTY (stara)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Litvanska AZERTY (nova)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Litvanska \"red brojeva\" QWERTY"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Litvanska \"fonetska\" QWERTY"

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "Latvijska"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "Malayalam"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Makedonska"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "Mjanmarska (Burmanska)"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "Mongolska (ćirilica)"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "Malteška (UK)"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "Malteška (US)"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "Holandska"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "Oriya"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Poljska (QWERTY)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Poljska (QWERTZ)"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "Pashto"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "Portugalska"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "Kanadska (Kvebek)"

#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "Rumunska (QWERTZ)"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "Rumunska (QWERTY)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "Ruska (fonetska)"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Saami (norveška)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr "Saami (švedska/finska)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "Sindhi"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "Slovenačka"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "Slovačka (QWERTZ)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "Slovačka (QWERTY)"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "Srpska (ćirilica)"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "Sirijska"

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "Sirijska (fonetska)"

#: keyboard.pm:297
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "Telugu"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "Tamilska (ISCII raspored)"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Tamilska (pisaća mašina)"

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "Tajlandska (Kedmanee)"

#: keyboard.pm:302
#, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "Tajlandska (TIS-820)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "Tajlandska (Pattachote)"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:308
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Tadžička"

#: keyboard.pm:312
#, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "Turkmenska"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "Turska (tradicionalni \"F\" model)"

#: keyboard.pm:314
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "Turska (moderni \"Q\" model)"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "Ukrajinska"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Urdu tastatura"

#: keyboard.pm:321
#, c-format
msgid "US keyboard (international)"
msgstr "US tastatura (međunarodna)"

#: keyboard.pm:322
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Uzbečka (ćirilica)"

#: keyboard.pm:324
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "Vijetnamska \"red brojeva\" QWERTY"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "Jugoslavenska (latinična)"

#: keyboard.pm:332
#, c-format
msgid "Right Alt key"
msgstr "Desna Alt tipka"

#: keyboard.pm:333
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Obje Shift tipke istovremeno"

#: keyboard.pm:334
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control i Shift tipka istovremeno"

#: keyboard.pm:335
#, c-format
msgid "CapsLock key"
msgstr "CapsLock tipka"

#: keyboard.pm:336
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Shift i CapsLock tipke istovremeno"

#: keyboard.pm:337
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl i Alt tipke istovremeno"

#: keyboard.pm:338
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt i Shift tipke istovremeno"

#: keyboard.pm:339
#, c-format
msgid "\"Menu\" key"
msgstr "\"Meni\" tipka"

#: keyboard.pm:340
#, c-format
msgid "Left \"Windows\" key"
msgstr "Lijeva \"Windows\" tipka"

#: keyboard.pm:341
#, c-format
msgid "Right \"Windows\" key"
msgstr "Desna \"Windows\" tipka"

#: keyboard.pm:342
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Obje Control tipke istovremeno"

#: keyboard.pm:343
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Obje Alt tipke istovremeno"

#: keyboard.pm:344
#, c-format
msgid "Left Shift key"
msgstr "Lijeva Shift tipka"

#: keyboard.pm:345
#, c-format
msgid "Right Shift key"
msgstr "Desna Shift tipka"

#: keyboard.pm:346
#, c-format
msgid "Left Alt key"
msgstr "Lijeva Alt tipka"

#: keyboard.pm:347
#, c-format
msgid "Left Control key"
msgstr "Lijeva Control tipka"

#: keyboard.pm:348
#, c-format
msgid "Right Control key"
msgstr "Desna Control tipka"

#: keyboard.pm:384
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Ovdje možete izabrati tipku ili kombinaciju tipki koja će\n"
"izvršiti prebacivanje između raznih rasporeda tastature\n"
"(npr: latinični i ne-latinični)"

#: keyboard.pm:389
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"Ova postavka će biti aktivirana nakon instalacije.\n"
"Tokom instalacije, trebate koristiti desnu Control\n"
"tipku da prebacujete između raznih rasporeda tastature."

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "Andora"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "Ujedinjeni Arapski Emirati"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "Afganistan"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua i Barbuda"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "Albanija"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "Armenija"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "Nizozemski Antili"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "Angola"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "Antarktik"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "Američka Samoa"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "Azerbejdžan"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosna i Hercegovina"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "Bangladeš"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "Bugarska"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "Bahrein"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "Benin"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "Bruneji"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "Bolivija"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "Bahami"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "Butan"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "Ostrvo Bouvet"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "Bocvana"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "Bjelorusija"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "Belize"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Kokosova ostrva"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Kongo (Kinshasa)"

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "Centralnoafrička Republika"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongo (Brazzaville)"

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "Obala Slonovače"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "Cook ostrva"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "Čile"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "Kamerun"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "Kina"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "Kolumbija"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "Srbija i Crna Gora"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "Kuba"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "Zelenortska ostrva"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "Uskršnje ostrvo"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "Kipar"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "Džibuti"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "Dominika"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "Dominikanska Republika"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "Alžir"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "Ekvador"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "Egipat"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "Zapadna Sahara"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "Eritreja"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "Etiopija"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "Fidži"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Falklandsko otočje"

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "Micronesia"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "Farska ostrva"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "Ujedinjeno Kraljevstvo"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "Gruzija"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "Francuska Gvajana"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "Gana"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "Gibraltar"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "Grenland"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "Gambija"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "Gvineja"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Gvadalupe"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "Ekvatorijalna Gvineja"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "South Georgia i South Sandwich ostrva"

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "Gvatemala"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "Gvineja Bisau"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "Gvajana"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "Kina (Hong Kong)"

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Heard ostrvo i McDonaldova ostrva"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "Hrvatska"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "Indonezija"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "Indija"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Britansko-Indijska morska teritorija"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "Irak"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "Iran"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "Island"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "Jamajka"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "Jordan"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "Kenija"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgistan"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "Kambođa"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "Komori"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts and Nevis"

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "Koreja (Sjeverna)"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "Koreja"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "Kuvajt"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "Kajmanska ostrva"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "Kazahstan"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "Liban"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "Saint Lucia"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "Lihtenštajn"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "Šri Lanka"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "Liberija"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "Lesoto"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "Litvanija"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "Luksemburg"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "Latvija"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "Libija"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "Maroko"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "Monako"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "Moldova"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "Maršalova ostrva"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "Makedonija"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "Mali"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "Mongolija"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "Sjeverna Marijanska ostrva"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "Martinik"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "Mauritanija"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "Mauricijus"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "Maldivi"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "Malavi"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "Meksiko"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "Malezija"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "Mozambik"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "Namibija"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "Nova Kaledonija"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "Niger"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "Norfolk ostrvo"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "Nigerija"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "Nikaragva"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "Oman"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "Panama"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "Peru"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "Francuska Polinezija"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "Papua Nova Gvineja"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "Filipini"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre and Miquelon"

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "Portoriko"

#: lang.pm:369
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "Paragvaj"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "Palau"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "Katar"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "Rumunija"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "Saudijska Arabija"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "Solomonska ostrva"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "Sejšelska ostrva"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "Singapur"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr "Saint Helena"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "Slovenija"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard and Jan Mayen ostrva"

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "Somalija"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "Surinam"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome i Principe"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "Sirija"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "Svazilend"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks i Caicos ostrva"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "Čad"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "Francuske Južne Teritorije"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "Togo"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "Tadžikistan"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "Istočni Timor"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "Tunis"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "Turska"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad i Tobago"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "Tanzanija"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "Ukrajina"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "United States Minor Outlying Islands"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "Urugvaj"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: lang.pm:419
#, c-format
msgid "Vatican"
msgstr "Vatikan"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Saint Vincent and the Grenadines"

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "Venecuela"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr "Djevičanska ostrva (Britanska)"

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Djevičanska ostrva (SAD)"

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "Vijetnam"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis i Futuna"

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "Jemen"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "Zambija"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabve"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "Dobro došli u %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Najprije ukloni logičke volumene\n"

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""

#: modules/interactive.pm:19
#, fuzzy, c-format
msgid "This driver has no configuration parameter!"
msgstr "Podešavanje UPS drajvera"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Podešavanje modula"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Ovdje možete podesiti svaki parametar modula."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Pronađeno %s interfejsa"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Imate li neki drugi?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Imate li ijedan %s interfejs?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Pogledaj hardware info"

#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "Instaliram drajver za USB kontroler"

#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Instaliram drajver za firewire kontroler %s"

#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Instaliram drajver za hard disk kontroler %s"

#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Instaliram drajver za Ethernet kontroler %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instaliram drajver za %s karticu %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Sada možete navesti opcije za modul %s.\n"
"Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
"ime2=vrijednost2 ...''.\n"
"Na primjer, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "Opcije modula"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "Koji %s drajver ću pokušati?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
"ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n"
"ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve\n"
"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n"
"ali ne bi trebalo izazvati nikakvu štetu."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "Ispitivanje"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "Navedi opcije"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Učitavanje modula %s nije uspjelo.\n"
"Želite li probati opet sa drugim parametrima?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "broj"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d brojeva razdvojenih zarezom"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d stringova razdvojenih zarezom"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "brojevi razdvojeni zarezom"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "tekst razdvojen zarezima"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standard"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Opšti PS2 Miš sa točkićem"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
#: network/netconnect.pm:614 network/netconnect.pm:619
#: network/netconnect.pm:635 network/netconnect.pm:637
#, c-format
msgid "Automatic"
msgstr "Automatski"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 dugme"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Opšti miš sa 2 dugmeta"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Opšti miš sa 3 dugmeta sa simulacijom točkića"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Sa točkićem"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "serijski"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Opšti miš sa 3 dugmeta"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan sa simulacijom točkića"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series sa simulacijom točkića"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (serijski, stari C7 tip)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (serijski, stari C7 tip) sa simulacijom točkića"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse sa simulacijom točkića"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 dugmeta"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 dugmeta"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 dugmeta sa simulacijom točkića"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Univerzalno"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "Bilo koji PS/2 ili USB miš"

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Explorer"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "nijedan"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Bez miša"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr "Synaptics Touchpad"

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "Molim testirajte miš"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "Da aktivirate miša,"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "POMJERITE VAŠ TOČKIĆ!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "Web server"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "DNS server"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "SSH server"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "FTP server"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Mail server"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP i IMAP server"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "Telnet server"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "Windows dijeljenje datoteka (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "CUPS server"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "Eho zahtjev (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "BitTorrent"

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr ""

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""
"drakfirewall podešavanje\n"
"\n"
"Podesite lični firewall na ovom Mandriva Linux računaru.\n"
"Ako želite moćnu soluciju posebnog firewalla, molim pogledajte\n"
"specijaliziranu Mandriva Security Firewall distribuciju."

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall podešivač\n"
"\n"
"Prije nego što nastavite, provjerite da li ste ispravno podesili pristup\n"
"mreži/Internetu pomoću alata drakconnect."

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Kojim servisima želite dozvoliti pristup sa Interneta?"

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Ovdje možete unijeti razne portove. \n"
"Primjeri ispravno unesenih portova su: 139/tcp 139/udp 600:610/tcp 600:610/"
"udp.\n"
"Pogledajte datoteku /etc/services za više informacija."

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Zadan je neispravan port: %s.\n"
"Odgovarajući format je \"port/tcp\" ili \"port/udp\", \n"
"gdje je \"port\" cijeli broj između 1 i 65535.\n"
"\n"
"Možete takođe zadati raspon portova (npr: 24300:24350/udp)"

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr "Sve (bez firewalla)"

#: network/drakfirewall.pm:209
#, c-format
msgid "Other ports"
msgstr "Ostali portovi"

#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:385 standalone/net_applet:422
#, fuzzy, c-format
msgid "Interactive Firewall"
msgstr "Firewall"

#: network/drakfirewall.pm:252
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""

#: network/drakfirewall.pm:257
#, c-format
msgid "Use Interactive Firewall"
msgstr ""

#: network/ifw.pm:129
#, fuzzy, c-format
msgid "Port scanning"
msgstr "Bez dijeljenja"

#: network/ifw.pm:130
#, fuzzy, c-format
msgid "Service attack"
msgstr "Napadnuti servis: %s"

#: network/ifw.pm:131
#, fuzzy, c-format
msgid "Password cracking"
msgstr "Šifra (ponovo)"

#: network/ifw.pm:132
#, c-format
msgid "\"%s\" attack"
msgstr ""

#: network/ifw.pm:134
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr "Napad skeniranjem portova je pokušan sa %s."

#: network/ifw.pm:135
#, c-format
msgid "The %s service has been attacked by %s."
msgstr "Servis %s je napadnut sa %s."

#: network/ifw.pm:136
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr "Napad razvaljivanja šifre je pokušan sa %s."

#: network/ifw.pm:137
#, fuzzy, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr "Napad skeniranjem portova je pokušan sa %s."

#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
#: network/netconnect.pm:561 network/netconnect.pm:709
#: network/netconnect.pm:713
#, c-format
msgid "Unlisted - edit manually"
msgstr "Nije na spisku - ručno izmijenite"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "I do not know"
msgstr "Ne znam"

#: network/isdn.pm:161 network/netconnect.pm:396
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:396
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:602 network/netconnect.pm:619
#: network/netconnect.pm:635
#, c-format
msgid "Manual"
msgstr "Ručno"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr "Molim izaberite Windows drajver (.inf datoteka)"

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:494
#: network/netconnect.pm:506
#, c-format
msgid "Manual choice"
msgstr "Ručni izbor"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "Interna ISDN kartica"

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "Ručno podešavanje"

#: network/netconnect.pm:81 standalone/drakroam:121
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "Automatska IP (BOOTP/DHCP)"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "Automatska IP (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protokol za ostatak svijeta"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Evropski protokol (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol za ostatak svijeta \n"
" bez D-kanala (iznajmljene linije)"

#: network/netconnect.pm:103 standalone/harddrake2:329
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "nepoznat"

#: network/netconnect.pm:120 network/thirdparty.pm:220
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch USB modem"

#: network/netconnect.pm:121
#, c-format
msgid "Sagem USB modem"
msgstr "Sagem USB modem"

#: network/netconnect.pm:122
#, c-format
msgid "Bewan modem"
msgstr "Bewan modem"

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "ECI Hi-Focus modem"

#: network/netconnect.pm:127
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Dynamic Host Configuration Protocol (DHCP)"

#: network/netconnect.pm:128
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "Ručna TCP/IP konfiguracija"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "Point to Point Tunneling Protocol (PPTP)"

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP over Ethernet (PPPoE)"

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP over ATM (PPPoA)"

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr "DSL preko CAPI"

#: network/netconnect.pm:136
#, c-format
msgid "Bridged Ethernet LLC"
msgstr "Bridged Ethernet LLC"

#: network/netconnect.pm:137
#, c-format
msgid "Bridged Ethernet VC"
msgstr "Bridged Ethernet VC"

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr "Routed IP LLC"

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr "Routed IP VC"

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "Skripta"

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "Terminal"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:251 standalone/drakconnect:56
#, c-format
msgid "Network & Internet Configuration"
msgstr "Podešavanje mreže i Interneta"

#: network/netconnect.pm:257
#, c-format
msgid "LAN connection"
msgstr "LAN veza"

#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, c-format
msgid "Wireless connection"
msgstr "Bežična veza"

#: network/netconnect.pm:259
#, c-format
msgid "ADSL connection"
msgstr "ADSL veza"

#: network/netconnect.pm:260
#, c-format
msgid "Cable connection"
msgstr "Kablovska veza"

#: network/netconnect.pm:261
#, c-format
msgid "ISDN connection"
msgstr "ISDN veza"

#: network/netconnect.pm:262
#, c-format
msgid "Modem connection"
msgstr "Modemska veza"

#: network/netconnect.pm:263
#, c-format
msgid "DVB connection"
msgstr ""

#: network/netconnect.pm:273
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Izaberite vrstu veze koju želite podesiti"

#: network/netconnect.pm:288 network/netconnect.pm:787
#, c-format
msgid "Connection Configuration"
msgstr "Podešavanje konekcije"

#: network/netconnect.pm:288 network/netconnect.pm:788
#, c-format
msgid "Please fill or check the field below"
msgstr "Molim ispunite ili provjerite polje ispod"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "Vaš lični broj telefona"

#: network/netconnect.pm:292 network/netconnect.pm:791
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Naziv provajdera (npr. provajder.net)"

#: network/netconnect.pm:293 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "Broj telefona provajdera"

#: network/netconnect.pm:294
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr "Provider DNS 1 (opcionalno)"

#: network/netconnect.pm:295
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr "Provider DNS 2 (opcionalno)"

#: network/netconnect.pm:296 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "Način biranja broja"

#: network/netconnect.pm:297 standalone/drakconnect:449
#: standalone/drakconnect:517
#, c-format
msgid "Connection speed"
msgstr "Brzina konekcije"

#: network/netconnect.pm:298 standalone/drakconnect:454
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Timeout konekcije (u sek.)"

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:794 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "Korisničko ime"

#: network/netconnect.pm:300 network/netconnect.pm:325
#: network/netconnect.pm:795 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "Šifra"

#: network/netconnect.pm:301 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "IRQ kartice"

#: network/netconnect.pm:302 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "Memorija kartice (DMA)"

#: network/netconnect.pm:303 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "IO kartice"

#: network/netconnect.pm:304 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "IO_0 kartice"

#: network/netconnect.pm:305
#, c-format
msgid "Card IO_1"
msgstr "IO_1 kartice"

#: network/netconnect.pm:320
#, c-format
msgid "Cable: account options"
msgstr "Kablovski pristup: opcije računa"

#: network/netconnect.pm:323
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr "Koristi BPALogin (potreban za Telstra ISP)"

#: network/netconnect.pm:349 network/netconnect.pm:671
#: network/netconnect.pm:827 network/netconnect.pm:1171
#, c-format
msgid "Select the network interface to configure:"
msgstr "Izaberite mrežni interface koji želite podesiti:"

#: network/netconnect.pm:351 network/netconnect.pm:386
#: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70
#: standalone/drakconnect:713
#, c-format
msgid "Net Device"
msgstr "Mrežni uređaj"

#: network/netconnect.pm:352 network/netconnect.pm:357
#, c-format
msgid "External ISDN modem"
msgstr "Vanjski ISDN modem"

#: network/netconnect.pm:385 standalone/harddrake2:216
#, c-format
msgid "Select a device!"
msgstr "Izaberite uređaj !"

#: network/netconnect.pm:394 network/netconnect.pm:404
#: network/netconnect.pm:414 network/netconnect.pm:447
#: network/netconnect.pm:461
#, c-format
msgid "ISDN Configuration"
msgstr "Podešavanje ISDNa"

#: network/netconnect.pm:395
#, c-format
msgid "What kind of card do you have?"
msgstr "Koju vrstu kartice imate?"

#: network/netconnect.pm:405
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
"ispravne.\n"
"\n"
"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"

#: network/netconnect.pm:409
#, c-format
msgid "Continue"
msgstr "Nastavak"

#: network/netconnect.pm:409
#, c-format
msgid "Abort"
msgstr "Prekid"

#: network/netconnect.pm:415
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Koja od navedenih je vaša ISDN kartica?"

#: network/netconnect.pm:433
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""
"Za ovaj modem je dostupan CAPI drajver. Ovaj CAPI drajver vam može ponuditi "
"više mogućnosti od slobodnog drajvera (npr. slanje faksova). Koji drajver "
"želite koristiti?"

#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Drajver"

#: network/netconnect.pm:447
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Koji protokol želite koristiti?"

#: network/netconnect.pm:449 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Protokol"

#: network/netconnect.pm:461
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"Izaberite vašeg providera.\n"
" Ako nije na listi, izaberite Nije na listi"

#: network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:708
#, c-format
msgid "Provider:"
msgstr "Provajder:"

#: network/netconnect.pm:472
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Vaš modem nije podržan pod ovim sistemom.\n"
"Pogledajte http://www.linmodems.org"

#: network/netconnect.pm:491
#, c-format
msgid "Select the modem to configure:"
msgstr "Izaberite modem koji želite podesiti:"

#: network/netconnect.pm:526
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Molim izaberite na koji serijski port je nakačen vaš modem."

#: network/netconnect.pm:555
#, c-format
msgid "Select your provider:"
msgstr "Izaberite vašeg Internet provajdera"

#: network/netconnect.pm:579
#, c-format
msgid "Dialup: account options"
msgstr "Dialup: opcije računa"

#: network/netconnect.pm:582
#, c-format
msgid "Connection name"
msgstr "Naziv konekcije"

#: network/netconnect.pm:583
#, c-format
msgid "Phone number"
msgstr "Broj telefona"

#: network/netconnect.pm:584
#, c-format
msgid "Login ID"
msgstr "Login ID"

#: network/netconnect.pm:599 network/netconnect.pm:632
#, c-format
msgid "Dialup: IP parameters"
msgstr "Dialup: IP parametri"

#: network/netconnect.pm:602
#, c-format
msgid "IP parameters"
msgstr "IP parametri"

#: network/netconnect.pm:603 network/netconnect.pm:942
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "IP adresa"

#: network/netconnect.pm:604
#, c-format
msgid "Subnet mask"
msgstr "Subnet maska"

#: network/netconnect.pm:616
#, c-format
msgid "Dialup: DNS parameters"
msgstr "Dialup: DNS parametri"

#: network/netconnect.pm:619
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:620
#, c-format
msgid "Domain name"
msgstr "Ime domena"

#: network/netconnect.pm:621 network/netconnect.pm:792
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr "Prvi DNS server (opcionalno)"

#: network/netconnect.pm:622 network/netconnect.pm:793
#: standalone/drakconnect:993
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Drugi DNS server (opcionalno)"

#: network/netconnect.pm:623
#, c-format
msgid "Set hostname from IP"
msgstr "Odredi hostname iz IP adrese"

#: network/netconnect.pm:635 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: network/netconnect.pm:636 standalone/drakroam:124
#, c-format
msgid "Gateway IP address"
msgstr "IP adresa gateway-a"

#: network/netconnect.pm:671
#, c-format
msgid "ADSL configuration"
msgstr "Podešavanje ADSLa"

#: network/netconnect.pm:706
#, c-format
msgid "Please choose your ADSL provider"
msgstr "Molim izaberite vašeg ADSL provajdera"

#: network/netconnect.pm:736
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""

#: network/netconnect.pm:739
#, c-format
msgid "ADSL connection type:"
msgstr "Vrsta ADSL veze:"

#: network/netconnect.pm:797
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr "Virtual Path ID (VPI):"

#: network/netconnect.pm:798
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr "Virtual Circuit ID (VCI):"

#: network/netconnect.pm:801
#, c-format
msgid "Encapsulation:"
msgstr "Enkapsulacija:"

#: network/netconnect.pm:831
#, c-format
msgid "Manually load a driver"
msgstr "Ručno učitaj drajver"

#: network/netconnect.pm:832
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr "Koristi Windows drajver (putem ndiswrappera)"

#: network/netconnect.pm:897
#, c-format
msgid "Zeroconf hostname resolution"
msgstr "Zeroconf rezolvira hostname"

#: network/netconnect.pm:898 network/netconnect.pm:929
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Podešavam mrežni uređaj %s (drajver %s)"

#: network/netconnect.pm:899
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""

#: network/netconnect.pm:930
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Molim unesite IP konfiguraciju za ovaj računar.\n"
"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
"razdvojenoj tačkama (npr. 1.2.3.4)."

#: network/netconnect.pm:937 standalone/drakconnect:373
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Odredi ime računara iz DHCP adrese"

#: network/netconnect.pm:938 standalone/drakconnect:375
#, c-format
msgid "DHCP host name"
msgstr "DHCP ime računara"

#: network/netconnect.pm:943 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "Netmask"

#: network/netconnect.pm:945 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Otkrij id mrežne karte (korisno za laptope)"

#: network/netconnect.pm:946 standalone/drakconnect:438
#, c-format
msgid "Network Hotplugging"
msgstr "Network Hotplugging"

#: network/netconnect.pm:948 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr "Pokreni na bootu"

#: network/netconnect.pm:950 standalone/drakconnect:460
#, c-format
msgid "Metric"
msgstr "Metrika"

#: network/netconnect.pm:951
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr ""

#: network/netconnect.pm:953 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr "DHCP klijent"

#: network/netconnect.pm:955 standalone/drakconnect:379
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "Timeout konekcije (u sek.)"

#: network/netconnect.pm:956 standalone/drakconnect:382
#, fuzzy, c-format
msgid "Get DNS servers from DHCP"
msgstr "IP adresa DNS servera"

#: network/netconnect.pm:957 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:958 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:966 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresa treba biti u formatu 1.2.3.4"

#: network/netconnect.pm:970 standalone/drakconnect:680
#, fuzzy, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "Gateway adresa treba biti u formatu 1.2.3.4"

#: network/netconnect.pm:974
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr "Upozorenje: IP adresa %s je obično rezervisana !"

#: network/netconnect.pm:979 standalone/drakTermServ:1856
#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
#, c-format
msgid "%s already in use\n"
msgstr "%s je već u upotrebi\n"

#: network/netconnect.pm:1019
#, c-format
msgid "Choose an ndiswrapper driver"
msgstr "Izaberite ndiswrapper drajver"

#: network/netconnect.pm:1021
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr ""

#: network/netconnect.pm:1021
#, c-format
msgid "Install a new driver"
msgstr "Instaliraj novi drajver"

#: network/netconnect.pm:1033
#, c-format
msgid "Select a device:"
msgstr ""

#: network/netconnect.pm:1062
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Molimo unesite parametre bežične veze za ovu karticu:"

#: network/netconnect.pm:1065 standalone/drakconnect:404
#: standalone/drakroam:52
#, c-format
msgid "Operating Mode"
msgstr "Režim rada"

#: network/netconnect.pm:1066
#, c-format
msgid "Ad-hoc"
msgstr "Ad-hoc"

#: network/netconnect.pm:1066
#, c-format
msgid "Managed"
msgstr "Upravljano"

#: network/netconnect.pm:1066
#, c-format
msgid "Master"
msgstr "Glavni"

#: network/netconnect.pm:1066
#, c-format
msgid "Repeater"
msgstr "Repeater"

#: network/netconnect.pm:1066
#, c-format
msgid "Secondary"
msgstr "Sekundarni"

#: network/netconnect.pm:1066
#, c-format
msgid "Auto"
msgstr "Auto"

#: network/netconnect.pm:1069 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr "Ime mreže (ESSID)"

#: network/netconnect.pm:1070 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr ""

#: network/netconnect.pm:1075
#, c-format
msgid "Allow access point roaming"
msgstr ""

#: network/netconnect.pm:1077 standalone/drakconnect:406
#, c-format
msgid "Network ID"
msgstr "ID mreže"

#: network/netconnect.pm:1078 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr "Frekvencija"

#: network/netconnect.pm:1079 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr "Prag osjetljivosti"

#: network/netconnect.pm:1080 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr "Brzina veze (u b/s)"

#: network/netconnect.pm:1081 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:1082
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""
"RTS/CTS dodaje proceduru potvrde prijema za svaki paket kako bi se "
"osiguralo\n"
"da su podaci ispravno preneseni. Ovo dodaje neiskorišteni prenos, ali može\n"
"rezultirati boljim performansama u slučaju skrivenih čvorova ili velikog "
"broja aktivnih\n"
"čvorova (nodeova). Ovaj parametar podešava veličinu najmanjeg paketa za koji "
"će\n"
"čvor poslati RTS. Ako je vrijednost jednaka maksimalnoj veličini paketa, "
"procedura\n"
"je isključena. Takođe možete podesiti ovaj parametar na auto, fixed ili off."

#: network/netconnect.pm:1089 standalone/drakconnect:421
#, c-format
msgid "Fragmentation"
msgstr "Fragmentacija"

#: network/netconnect.pm:1090 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr "Dodatni parametri naredbe iwconfig"

#: network/netconnect.pm:1091
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""
"Ovdje možete podesiti neke dodatne parametre kao što su:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick je već isti kao "
"i hostname).\n"
"\n"
"Pogledajte man stranicu iwconfig(8) za dodatne informacije."

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1098 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr "Dodatni parametri naredbe iwspy"

#: network/netconnect.pm:1099
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""
"lwspy se koristi da bi se dobila lista adresa na bežičnom interfejsu\n"
"i kako bi se dobili podaci o kvaliteti linka za svaku od njih.\n"
"\n"
"Ove informacije su iste kao i one koje se nalaze u /proc/net/wireless :\n"
"kvaliteta linka, jačina signala i nivo šuma.\n"
"\n"
"Pogledajte man stranicu iwspy(8) za više informacija."

#: network/netconnect.pm:1108 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr "Dodatni parametri naredbe iwpriv"

#: network/netconnect.pm:1109
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""
"iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
"mrežnog interfejsa.\n"
"\n"
"iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
"razliku\n"
"od iwconfig koji se bavi opštim parametrima).\n"
"\n"
"U teoriji, dokumentacija za svaki uređaj bi trebala uključivati objašenjenje "
"tih\n"
"posebnih naredbi i njihove efekte.\n"
"\n"
"Pogledajte man stranicu iwpriv(8) za daljnje informacije."

#: network/netconnect.pm:1124
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Frekvencija bi trebala imati završetak k, M ili G (na primjer, \"2.46G\" za "
"frekvenciju 2.46 GHz) ili dodajte odgovarajući broj nula (0)."

#: network/netconnect.pm:1128
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Brzina bi trebala imati završetak k, M ili G (na primjer, \"11M\" za 11M) "
"ili dodajte odgovarajući broj nula (0)."

#: network/netconnect.pm:1171
#, c-format
msgid "DVB configuration"
msgstr ""

#: network/netconnect.pm:1172
#, c-format
msgid "DVB Adapter"
msgstr ""

#: network/netconnect.pm:1189
#, c-format
msgid "DVB adapter settings"
msgstr ""

#: network/netconnect.pm:1192
#, c-format
msgid "Adapter card"
msgstr ""

#: network/netconnect.pm:1193
#, c-format
msgid "Net demux"
msgstr ""

#: network/netconnect.pm:1194
#, c-format
msgid "PID"
msgstr "PID"

#: network/netconnect.pm:1222
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Molim unesite naziv vašeg računara ako ga znate.\n"
"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
"kao što je ``mojcomp.mojlab.mojafirma.com''.\n"
"Možete također unijeti IP adresu gateway-a ako ga imate"

#: network/netconnect.pm:1227
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""
"Zadnje, ali ne i najmanje važno, možete unijeti IP adrese vaših DNS servera."

#: network/netconnect.pm:1229 standalone/drakconnect:991
#, c-format
msgid "Host name (optional)"
msgstr "Ime računara (opcionalno)"

#: network/netconnect.pm:1229 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "Ime računara"

#: network/netconnect.pm:1231
#, c-format
msgid "DNS server 1"
msgstr "DNS server 1"

#: network/netconnect.pm:1232
#, c-format
msgid "DNS server 2"
msgstr "DNS server 2"

#: network/netconnect.pm:1233
#, c-format
msgid "DNS server 3"
msgstr "DNS server 3"

#: network/netconnect.pm:1234
#, c-format
msgid "Search domain"
msgstr "Domene za pretragu"

#: network/netconnect.pm:1235
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""
"Podrazumijeva se domena za pretragu koja je dio kvalifikovanog imena računara"

#: network/netconnect.pm:1236
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (tj. %s)"

#: network/netconnect.pm:1238
#, c-format
msgid "Gateway device"
msgstr "Gateway uređaj"

#: network/netconnect.pm:1247
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"

#: network/netconnect.pm:1252 standalone/drakconnect:685
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Gateway adresa treba biti u formatu 1.2.3.4"

#: network/netconnect.pm:1265
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""
"Ako je potrebno, unesite Zeroconf ime računara.\n"
"Ovo je ime koje će vaš računar koristiti da objavi svoje\n"
"dijeljene resurse koji nisu pod upravljanjem mreže. To nije\n"
"potrebno na većini mreža."

#: network/netconnect.pm:1269
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf Ime računara"

#: network/netconnect.pm:1272
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zeroconf ime računara ne smije sadržavati ."

#: network/netconnect.pm:1282
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "Da li želite pokrenuti konekciju prilikom boota?"

#: network/netconnect.pm:1295
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Da li želite pokrenuti konekciju prilikom boota?"

#: network/netconnect.pm:1311
#, c-format
msgid "Automatically at boot"
msgstr "Automatski pri startu sistema"

#: network/netconnect.pm:1313
#, c-format
msgid "By using Net Applet in the system tray"
msgstr "Koristeći Net Applet u sistemskom trayu"

#: network/netconnect.pm:1315
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr "Ručno (interfejs će se i dalje pokretati prilikom boota)"

#: network/netconnect.pm:1324
#, c-format
msgid "How do you want to dial this connection?"
msgstr "Kako želite uspostaviti ovu konekciju ?"

#: network/netconnect.pm:1337
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Da li se želite pokušati spojiti na Internet sada?"

#: network/netconnect.pm:1345 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr "Probavam vašu konekciju..."

#: network/netconnect.pm:1370
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Sistem je sada spojen na Internet."

#: network/netconnect.pm:1371
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Iz sigurnosnih razloga, sada će biti odspojen."

#: network/netconnect.pm:1372
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Izgleda da sistem nije spojen na Internet.\n"
"Probajte promijeniti postavke vaše konekcije."

#: network/netconnect.pm:1387
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Čestitamo, podešavanje mreže i Interneta je završeno.\n"
"\n"

#: network/netconnect.pm:1390
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Nakon što je to gotovo, preporučujemo da restartujete vaš X\n"
"okoliš kako bi se izbjegao problem sa promjenom naziva računara."

#: network/netconnect.pm:1391
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""
"Došlo je do problema prilikom podešavanja.\n"
"Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne "
"radi, možete ponovo pokrenuti podešavanje"

#: network/netconnect.pm:1402
#, c-format
msgid "(detected on port %s)"
msgstr "(detektovan na portu %s)"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1404
#, c-format
msgid "(detected %s)"
msgstr "(detektovan %s)"

#: network/netconnect.pm:1404
#, c-format
msgid "(detected)"
msgstr "(detektovan)"

#: network/netconnect.pm:1405
#, c-format
msgid "Network Configuration"
msgstr "Podešavanje mreže"

#: network/netconnect.pm:1406
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
"Kliknite na U redu da zadržite tu konfiguraciju ili Odustani za podešavanje "
"vaše Internet & Mrežne konekcije.\n"

#: network/netconnect.pm:1409
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "Potrebno je restartovati mrežu. Želite li je restartovati?"

#: network/netconnect.pm:1410
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Došlo je do problema prilikom restartovanja mreže:\n"
"\n"
"%s"

#: network/netconnect.pm:1411
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"Sada ćemo podesiti vezu %s.\n"
"\n"
"\n"
"Pritisnite \"%s\" za nastavak."

#: network/netconnect.pm:1412
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "Podešavanje je završeno, želite li primijeniti postavke?"

#: network/netconnect.pm:1413
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Podesili ste nekoliko načina za konekciju na Internet.\n"
"Izaberite jedan od njih koji ćete koristiti.\n"
"\n"

#: network/netconnect.pm:1414
#, c-format
msgid "Internet connection"
msgstr "Internet konekcija"

#: network/netconnect.pm:1431
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""
"Došlo je do neočekivane greške:\n"
"%s"

#: network/network.pm:411
#, c-format
msgid "Proxies configuration"
msgstr "Konfiguracija proxija"

#: network/network.pm:412
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080)"
msgstr ""

#: network/network.pm:413
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:414
#, c-format
msgid "Use HTTP proxy for HTTPS connections"
msgstr ""

#: network/network.pm:415
#, c-format
msgid "HTTPS proxy"
msgstr ""

#: network/network.pm:416
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:420
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy treba biti http://..."

#: network/network.pm:421
#, c-format
msgid "Proxy should be https?://..."
msgstr ""

#: network/network.pm:422
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URL treba počinjati sa 'ftp:' ili 'http:'"

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Molim unesite naziv interfejsa spojenog na Internet.\n"
"\n"
"Primjeri:\n"
"\t\tppp+ za modemsku ili DSL konekciju, \n"
"\t\teth0, ili eth1 za mrežnu konekciju, \n"
"\t\tippp+ za isdn konekciju.\n"

#: network/thirdparty.pm:232
#, fuzzy, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""
"Potreban vam je Alcatel-ov mikrokod.\n"
"Možete ga downloadovati na\n"
"%s\n"
"zatim kopirajte mgmt.o u /usr/share/speedtouch"

#: network/thirdparty.pm:241
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""
"Ne možemo podržavati ECI Hi-Focus modem pošto ne smijemo distribuirati "
"binarne drajvere.\n"
"\n"
"Možete naći drajver na http://eciadsl.flashtux.org/"

#: network/thirdparty.pm:321
#, fuzzy, c-format
msgid "Could not install the packages (%s)!"
msgstr "Ne mogu instalirati pakete %s!"

#: network/thirdparty.pm:329
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr ""

#: network/thirdparty.pm:330
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""

#: network/thirdparty.pm:332
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""

#: network/thirdparty.pm:372
#, fuzzy, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "Pobriši fontove sa mog sistema"

#: network/thirdparty.pm:374
#, c-format
msgid "No Windows system has been detected!"
msgstr ""

#: network/thirdparty.pm:384
#, c-format
msgid "Insert floppy"
msgstr "Ubacite disketu"

#: network/thirdparty.pm:385
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Ubacite FAT formatiranu disketu u jedinicu %s sa %s u root direktoriju i "
"pritisnite %s"

#: network/thirdparty.pm:395
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Greška pri pristupu disketi, ne mogu montirati uređaj %s"

#: network/thirdparty.pm:405
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""
"Potreban vam je Alcatel mikrokod.\n"
"Možete ga sada potražiti na disketi ili vašoj Windows particiji,\n"
"ili preskočiti ovaj korak i završiti ga kasnije."

#: network/thirdparty.pm:409 network/thirdparty.pm:411
#, c-format
msgid "Use a floppy"
msgstr "Koristi disketu"

#: network/thirdparty.pm:409
#, c-format
msgid "Use my Windows partition"
msgstr "Koristi moju Windows particiju"

#: network/thirdparty.pm:419
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr "Kopiranje firmware-a nije uspjelo, datoteka %s nije pronađena"

#: network/thirdparty.pm:424 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "Čestitamo!"

#: network/thirdparty.pm:424
#, c-format
msgid "Firmware copy succeeded"
msgstr "Kopiranje firmware-a uspjelo"

#: network/thirdparty.pm:493
#, c-format
msgid "Looking for required software and drivers..."
msgstr ""

#: network/thirdparty.pm:498
#, fuzzy, c-format
msgid "Please wait, running device configuration commands..."
msgstr "Molim sačekajte, otkrivam i podešavam uređaje..."

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr ""

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr ""

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "montiranje nije uspjelo: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Extended particije nisu podržane na ovoj platformi"

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Imate rupu u vašoj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
"Jedino rješenje je da pomjerite vaše primarne particije, kako bi se rupa "
"našla pored extended particija"

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Povratak iz datoteke %s nije uspio: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "Loša backup datoteka"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "Greška u pisanju datoteke: %s"

#: partition_table/raw.pm:253
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Nešto loše se dešava na vašem disku. \n"
"Test integriteta podataka nije uspio. \n"
"To znači će da pisanje bilo čega na disk rezultirati smećem."

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "obavezno"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "važno"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "vrlo fino"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "fino"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "možda"

#: pkgs.pm:474
#, fuzzy, c-format
msgid "Downloading file %s..."
msgstr "Šaljem datoteke..."

#: printer/cups.pm:105
#, c-format
msgid "(on %s)"
msgstr "(na %s)"

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr "(na ovom računaru)"

#: printer/cups.pm:117 standalone/printerdrake:200
#, c-format
msgid "Configured on other machines"
msgstr "Podešeno na ostalim računarima"

#: printer/cups.pm:119
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Na CUPS serveru \"%s\""

#: printer/cups.pm:119 printer/printerdrake.pm:4886
#: printer/printerdrake.pm:4896 printer/printerdrake.pm:5055
#: printer/printerdrake.pm:5066 printer/printerdrake.pm:5280
#, c-format
msgid " (Default)"
msgstr " (Default)"

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:158
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Common Unix Printing System (udaljeni server)"

#: printer/data.pm:159
#, c-format
msgid "Remote CUPS"
msgstr "Udaljeni CUPS"

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692
#: printer/main.pm:1810 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
#: printer/printerdrake.pm:3981
#, c-format
msgid "Unknown model"
msgstr "Nepoznat model"

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr "Lokalni štampač"

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "Udaljeni štampač"

#: printer/main.pm:26
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Štampač na udaljenom CUPS serveru"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, c-format
msgid "Printer on remote lpd server"
msgstr "Štampač na udaljenom lpd serveru"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Mrežni štampač (TCP/Socket)"

#: printer/main.pm:29
#, fuzzy, c-format
msgid "Printer on SMB/Windows server"
msgstr "Štampač na SMB/Windows 95/98/NT serveru"

#: printer/main.pm:30
#, c-format
msgid "Printer on NetWare server"
msgstr "Štampač na NetWare serveru"

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, c-format
msgid "Enter a printer device URI"
msgstr "Unesite URI uređaja štampača"

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr "Spoji zadatak na komandu"

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr "preporučeno"

#: printer/main.pm:355 standalone/printerdrake:199
#, c-format
msgid "Configured on this machine"
msgstr "Podešeno na ovom računaru"

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr " na paralelnom portu #%s"

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, c-format
msgid ", USB printer #%s"
msgstr ", USB štampač #%s"

#: printer/main.pm:366
#, c-format
msgid ", USB printer"
msgstr ", USB štampač"

#: printer/main.pm:370
#, c-format
msgid ", HP printer on a parallel port"
msgstr ", HP štampač na paralelnom portu"

#: printer/main.pm:372
#, c-format
msgid ", HP printer on USB"
msgstr ", HP štampač na USB portu"

#: printer/main.pm:374
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ", HP štampač na HP JetDirect"

#: printer/main.pm:376
#, c-format
msgid ", HP printer"
msgstr ", HP štampač"

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", višenamjenski uređaj na paralelnom portu #%s"

#: printer/main.pm:385
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", višenamjenski uređaj na paralelnom portu"

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ", višenamjenski uređaj na USBu"

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", višenamjenski uređaj na HP JetDirect"

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ", višenamjenski uređaj"

#: printer/main.pm:395
#, c-format
msgid ", printing to %s"
msgstr ", štampa u %s"

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", štampač \"%s\""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "na SMB/Windows serveru \"%s\", share \"%s\""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "na Novell serveru \"%s\", štampač \"%s\""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ", koristeći komandu %s"

#: printer/main.pm:429
#, c-format
msgid "Parallel port #%s"
msgstr "Paralelni port #%s"

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, c-format
msgid "USB printer #%s"
msgstr "USB štampač #%s"

#: printer/main.pm:434
#, c-format
msgid "USB printer"
msgstr "USB štampač"

#: printer/main.pm:438
#, c-format
msgid "HP printer on a parallel port"
msgstr "HP štampač na paralelnom portu"

#: printer/main.pm:440
#, c-format
msgid "HP printer on USB"
msgstr "HP štampač na USB portu"

#: printer/main.pm:442
#, c-format
msgid "HP printer on HP JetDirect"
msgstr "HP štampač na HP JetDirect"

#: printer/main.pm:444
#, c-format
msgid "HP printer"
msgstr "HP štampač"

#: printer/main.pm:450
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "Višenamjenski uređaj na paralelnom portu #%s"

#: printer/main.pm:453
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "Višenamjenski uređaj na paralelnom portu"

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr "Višenamjenski uređaj na USBu"

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "Višenamjenski uređaj na HP JetDirect"

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr "Višenamjenski uređaj"

#: printer/main.pm:463
#, c-format
msgid "Prints into %s"
msgstr "Štampa u %s"

#: printer/main.pm:466
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", štampač \"%s\""

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "TCP/IP host \"%s\", port %s"

#: printer/main.pm:474
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "SMB/Windows server \"%s\", share \"%s\""

#: printer/main.pm:479
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "Novell server \"%s\", štampač \"%s\""

#: printer/main.pm:482
#, c-format
msgid "Uses command %s"
msgstr "Koristi naredbu %s"

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:689 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3119
#, c-format
msgid "Raw printer (No driver)"
msgstr "Sirovo štampanje (Bez drajvera)"

#: printer/main.pm:1309 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, c-format
msgid "Local network(s)"
msgstr "Lokalna mreža (mreže)"

#: printer/main.pm:1311 printer/printerdrake.pm:227
#, c-format
msgid "Interface \"%s\""
msgstr "Interfejs \"%s\""

#: printer/main.pm:1313
#, c-format
msgid "Network %s"
msgstr "Mreža %s"

#: printer/main.pm:1315
#, c-format
msgid "Host %s"
msgstr "Računar %s"

#: printer/main.pm:1344
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
"Za štampač HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
"(firmware koji se nalazi na CDu koji je došao uz štampač ne radi) i izvadite "
"firmware datoteku. Ovo ćete uraditi tako što ćete raspakovati "
"samoraspakujuću '.exe' datoteku koristeći 'unzip' alat, te potražiti "
"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
"Ovdje će je automatski pronaći uploader skripta i poslati štampaču svaki put "
"kada štampač bude spojen i upaljen.\n"

#: printer/printerdrake.pm:67
#, c-format
msgid "CUPS printer configuration"
msgstr "Podešavanje CUPS štampača"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Ovdje možete izabrati da li štampači spojeni na ovaj računar trebaju biti "
"dostupni drugim računarima i kojim drugim računarima."

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Takođe možete odlučiti da li štampači na udaljenim računarima trebaju biti "
"automatski dostupni sa ovog računara."

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Štampači na ovom računaru su dostupni drugim računarima"

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Automatski pronađi dostupne štampače na udaljenim računarima"

#: printer/printerdrake.pm:82
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Dijeljenje štampača na računarima/mrežama:"

#: printer/printerdrake.pm:84
#, c-format
msgid "Custom configuration"
msgstr "Vlastita konfiguracija"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, c-format
msgid "No remote machines"
msgstr "Nema udaljenih računara"

#: printer/printerdrake.pm:100
#, c-format
msgid "Additional CUPS servers: "
msgstr "Dodatni CUP serveri:"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Da biste pristupili štampačima na udaljenim CUPS serverima u vašoj lokalnoj "
"mreži, sve što treba je da uključite opciju \"Automatski pronađi dostupne "
"štampače na udaljenim računarima\"; CUPS serveri će automatski informisati "
"vaš računar o svojim štampačima. Svi štampači koji su poznati vašem računaru "
"su navedeni u sekciji \"Udaljeni štampači\" glavnog Printerdrake prozora. "
"Ako vaš CUPS server nije u lokalnoj mreži, morate ovdje unijeti njegovu IP "
"adresu i eventualno broj porta kako biste dobili informacije od servera."

#: printer/printerdrake.pm:115
#, c-format
msgid "Japanese text printing mode"
msgstr "Japanski režim štampanja"

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"Ako ovo uključite, moći ćete štampati obične tekstualne datoteke na "
"japanskom jeziku. Koristite ovu funkciju samo ako zaista želite štampati "
"japanski tekst, jer kada je aktivirana, više ne možete štampati znakove sa "
"akcentima u latiničnim fontovima (npr. naša slova). Takođe nećete moći "
"prilagoditi margine, veličine znakova, itd. Ova postavka će utjecati samo na "
"štampače koji su definisani na ovom računaru. Ako želite štampati japanski "
"tekst na udaljenom računaru, trebate aktivirati ovu funkciju na tom računaru."

#: printer/printerdrake.pm:123
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Automatska ispravka konfiguracije CUPSa"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa biće "
"provjereno da\n"
"\n"
"- je instaliran LPD/LPRng, CUPS neće prepisati /etc/printcap\n"
"\n"
"- postoji /etc/cups/cupsd.conf, ako ne onda će biti napravljen\n"
"\n"
"- informacije o štampaču ne sadrže \"localhost\" kao ime servera prilikom "
"broadcasta.\n"
"\n"
"Ako vam neke od ovih mjera stvaraju probleme, možete isključiti ovu opciju, "
"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4519
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr "Udaljeni CUPS server i bez lokalnog CUPS demona"

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "Uključen"

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "Isključen"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""
"U ovom režimu, lokalni CUPS demon će biti zaustavljen i svi zahtjevi za "
"štampanje će ići direktno na server naveden ispod. Zapamtite da u tom "
"slučaju nije moguće definisati lokalne redove za štampu te da, ako je "
"navedeni server isključen, neće biti moguće štampati sa ovog računara."

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, c-format
msgid "Sharing of local printers"
msgstr "Dijeljenje lokalnih štampača"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr "Ovo su računari i mreže čiji lokalni štampači trebaju biti dostupni:"

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr "Dodaj računar/mrežu"

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr "Izmijeni izabrani računar/mrežu"

#: printer/printerdrake.pm:188
#, c-format
msgid "Remove selected host/network"
msgstr "Ukloni izabrani računar/mrežu"

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr "IP adresa računara/mreže:"

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr "Izaberite mrežu ili računar čijim štampačima treba omogućiti pristup."

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr "Nedostaje IP adresa računara/mreže."

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Unesena IP adresa računara/mreže nije ispravna.\n"

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Primjeri ispravnih IPa:\n"

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Ovaj računar/mreža je već na listi, ne možete ga ponovo dodati.\n"

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Pristupam štampačima na udaljenim CUPS serverima"

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Ovdje dodajte CUPS servere čije štampače želite koristiti. Ovo trebate "
"raditi samo ako serveri ne broadcast-uju informacije o njihovim štampačima "
"cijeloj lokalnoj mreži."

#: printer/printerdrake.pm:358
#, c-format
msgid "Add server"
msgstr "Dodaj server"

#: printer/printerdrake.pm:364
#, c-format
msgid "Edit selected server"
msgstr "Izmijeni izabrani server"

#: printer/printerdrake.pm:373
#, c-format
msgid "Remove selected server"
msgstr "Ukloni izabrani server"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "Unesite IP adresu i port računara čije štampače želite koristiti."

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "Ako nije naveden port, podrazumijevaće se 631."

#: printer/printerdrake.pm:422
#, c-format
msgid "Server IP missing!"
msgstr "Nedostaje IP adresa servera!"

#: printer/printerdrake.pm:428
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Unesena IP adresa nije ispravna.\n"

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr "Broj porta treba biti cijeli broj!"

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Ovaj server je već na listi, ne možete ga ponovo dodati.\n"

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Port"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, c-format
msgid "On, Name or IP of remote server:"
msgstr "Uključen, Ime ili IP adresa udaljenog servera:"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4528
#: printer/printerdrake.pm:4594
#, c-format
msgid "CUPS server name or IP address missing."
msgstr "Nedostaje naziv ili IP adresa CUPS servera."

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
#: printer/printerdrake.pm:4319 printer/printerdrake.pm:4414
#: printer/printerdrake.pm:4420 printer/printerdrake.pm:4448
#: printer/printerdrake.pm:4555 printer/printerdrake.pm:4664
#: printer/printerdrake.pm:4684 printer/printerdrake.pm:4693
#: printer/printerdrake.pm:4708 printer/printerdrake.pm:4909
#: printer/printerdrake.pm:5384 printer/printerdrake.pm:5467
#: standalone/printerdrake:75 standalone/printerdrake:590
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
#: printer/printerdrake.pm:4665
#, c-format
msgid "Reading printer data..."
msgstr "Čitam podatke o štampaču..."

#: printer/printerdrake.pm:587
#, c-format
msgid "Restarting CUPS..."
msgstr "Restartujem CUPS..."

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""

#: printer/printerdrake.pm:622
#, fuzzy, c-format
msgid "Printer auto administration"
msgstr "Auto-detekcija štampača"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""

#: printer/printerdrake.pm:626
#, fuzzy, c-format
msgid "Do automatic configuration of new printers"
msgstr "Automatsko ponovno podešavanje"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, fuzzy, c-format
msgid "when a USB printer is connected and turned on"
msgstr "(Provjerite da li su svi štampači spojeni i upaljeni).\n"

#: printer/printerdrake.pm:630
#, fuzzy, c-format
msgid "when Printerdrake is started"
msgstr "Ovaj štampač je onemogućen"

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr ""

#: printer/printerdrake.pm:640
#, fuzzy, c-format
msgid "Re-enable disabled printers"
msgstr "Dostupni štampači"

#: printer/printerdrake.pm:644
#, fuzzy, c-format
msgid "when the printing system is started"
msgstr "Promijenite sistem štampe"

#: printer/printerdrake.pm:680
#, fuzzy, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr "Korištenje/održavanje štampača \"%s\""

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""

#: printer/printerdrake.pm:686
#, fuzzy, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr "Broj porta treba biti cijeli broj!"

#: printer/printerdrake.pm:690
#, fuzzy, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr "Period mora biti pozitivan cijeli broj!"

#: printer/printerdrake.pm:701
#, fuzzy, c-format
msgid "Do not disable the printer"
msgstr "Onemogući štampač"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr ""

#: printer/printerdrake.pm:707
#, c-format
msgid "Number of retries"
msgstr "Broj ponovnih pokušaja:"

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr ""

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr "Izaberi konekciju štampača"

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr "Kako je štampač povezan na računar?"

#: printer/printerdrake.pm:748
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Ovdje ne morate podešavati štampače na udaljenim CUPS serverima; ovi "
"štampači će biti automatski prepoznati."

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4911
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""
"\n"
"UPOZORENJE: Nije aktivna nijedna lokalna mrežna konekcija, tako da ne mogu "
"pronaći ni testirati udaljene štampače!"

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""
"Automatsko prepoznavanje štampača (lokalni, TCP/Socket, SMB štampači i URI "
"uređaja)"

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr "Izmijeni period za auto-detekciju mrežnih štampača"

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""
"Unesite vremenski period (u msek.) tokom kojeg će se pokušavati automatski "
"prepoznati mrežni štampač."

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""
"Ako izaberete veći period, prepoznavanje mrežnih štampača će biti "
"pouzdanije, ali će skeniranje trajati duže, pogotovo ako imate mnogo "
"računara u mreži sa pokrenutim lokalnim firewallom."

#: printer/printerdrake.pm:772
#, c-format
msgid "The timeout must be a positive integer number!"
msgstr "Period mora biti pozitivan cijeli broj!"

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr "Proveravam vaš sistem..."

#: printer/printerdrake.pm:829
#, c-format
msgid "and one unknown printer"
msgstr "i jedan nepoznat štampač"

#: printer/printerdrake.pm:831
#, c-format
msgid "and %d unknown printers"
msgstr "i %d nepoznatih štampača"

#: printer/printerdrake.pm:835
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Sljedeći štampači\n"
"\n"
"%s%s\n"
"su direktno spojeni na vaš sistem"

#: printer/printerdrake.pm:837
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Sljedeći štampač\n"
"\n"
"%s%s\n"
"su direktno spojeni na vaš sistem"

#: printer/printerdrake.pm:838