# translation of DrakX@Cyrl.po to Uzbek # translation of DrakX-uz@Cyrl.po to Uzbek # Support for Uzbek language in DrakX. # Copyright (C) 2003 Free Software Foundation, Inc. # Copyright (C) 2003 MandrakeSoft. # Mashrab Kuvatov <kmashrab@uni-bremen.de>, 2003. # msgid "" msgstr "" "Project-Id-Version: DrakX-uz@Cyrl\n" "POT-Creation-Date: 2003-09-16 13:45+0200\n" "PO-Revision-Date: 2003-09-10 23:11+0200\n" "Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n" "Language-Team: Uzbek <uz-li@yahoogroups.com>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Ulash nuqtalarini topish uchun diskning qismlari tekshirilmoqda" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" "Moslama o'zgardi. clusternfs/dhcpd xizmati boshqadan ishga tushirilsinmi?" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "\t\tO'chirish=%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "tarmoqdagi printerning porti" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "Iltimos disketni qo'ying:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "Qaysi foydalanuvchi" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Bandning qaysi turini qo'shmoqchisiz?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "Diskning qismlar jadvalini qaytadan tiklash" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "Kompyuterning nomini moslash" #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS serverida \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "O'rnatishdan kegin moslash" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" "Amaldagi havfsizlik darajasi - %s\n" "Ko'rish/tahrirlash uchun ruxsatlarni tanlang" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Buning o'rniga \"%s\"ni ishlating" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Turi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Ishlab chiqaruvchining PPD-fayllari yoki CUPS'ning asl drayverlari bilan " "moslangan printerlarni ham uzatib bo'lmaydi." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Shri Lanka" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Quyidagi printerlar\n" "\n" "%s%s\n" "sistemangizga to'g'ridan-to'g'ri ulangan." #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Markaziy Afrika Respublikasi" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Geytvey uskunasi" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "Qo'shimcha moslamalar" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "Tarmoq usuli:" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "Ethernet karta" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Parameterlar" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "yo'q" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "Avto-aniqlash" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Interfeys:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "O'rnatish sinfini tanlang" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Sistema Internetga ulanmaganga o'xshaydi.\n" "Aloqani boshqadan moslashga urinib ko'ring." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Belorus" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Faylga (%s) yozishda xato" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Quyidagi paketlar o'rnatiladi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "CUPS'ni moslash" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progress" msgstr "Sinov betlari" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "Gonkong" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Yangi qism yaratish uchun diskda etarli joy yo'q" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Ko'chirilmoqda" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "ha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "(" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Tarmoqni moslash yordamchisiga marhamat.\n" "Biz Internetga/tarmoqqa ulanishingizni moslash arafasidamiz.\n" "Agar avto-aniqlashdan foydalanmoqchi bo'lmasangiz, belgini olib tashlang.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr ")" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Lebanon" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "To'xtatish" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "Tanlangan kompyuterni tuzatish" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "Kompakt-disk uskunasi aniqlanmagan!" #: ../../standalone/drakbackup:1 #, c-format msgid "\tUse .backupignore files\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "Bolgarcha (fonetik)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "DHCP'ning boshlang'ich IP'si" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 Kb" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Operatsion sistema yuklagichining asosiy parametrlari" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "Magnit tasma" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Malayziya" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "Tarmoq qidirilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Bu parametr orqali /etc direktoriyangizning istagan versiyasini\n" "tiklashingiz mumkin." #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "" "O'zgarishlar qo'llandi, dm xizmatini boshqadan ishga tushirishni istaysizmi?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Shvetsariya (Frantsuzcha)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "Avgust" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" "mkraid buyrug'i muvaffaqiyatsiz tugadi (balki raidtools dasturi " "etishmayapti?)." #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "Veb-kamera" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "protsessor keshining (ikkinchi daraja) hajmi" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "Tovush kartasi" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "Oy" #: ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "Tiklash uchun fayllarni qidirish" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Lyuksemburg" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "<file>\".\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "%s daraja\n" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "Eski Suriyacha (fonetik)" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "Eron" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Iroq" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "connecting to %s ..." msgstr "Bugzilla yordamchisi bilan aloqa o'rnatilmoqda..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Moslanmoqda..." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Maxfiy so'z (yana)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "O'rnatilgan shriftlarni qidirish" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "Andoza ish stoli" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Venesuela" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP raqami" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Hajmni tanlash" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Buzuq ma'lumotning ro'yxati:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Modemingizni bu sistemada ishlatib bo'lmaydi.\n" "http://www.linmodem.org veb-saytiga qarang." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Diskning boshqa qismini tanlash" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "Joriy foydalanuvchi" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "Foydalanuvchi" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "Chap \"Windows\" tugmasi" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Gviana" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "dhcpd serverini moslash" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Direktoriyalar uchun ishlatiladi:\n" " uni faqat direktoriyaning egasi yoki shu direktoriyadagi fayl o'chirishi " "mumkin" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " Novell serverida \"%s\", printer \"%s\"" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Name" msgstr "Printerning nomi" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Modulni olib tashlash" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Maxfiy so'z" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "Qo'shimcha moslamalar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Diskning tub qismi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Qo'shish uchun mavjud bo'lgan RAID'ni tanlang" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Turkcha (zamonaviy \"Q\" modeli)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "Lilo'ning xabari topilmadi" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "agar kerak bo'lsa" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "Tiklash muvaffaqiyatsiz tugadi" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jazz drives" msgstr "/_Jazz uskunalarini avto-aniqlash" #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Bu sistema uchun maxfiy so'zni DrakBackup moslamasida saqlash." #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Kirish\n" "\n" "Mandrake Linux distributivida mavjud bo'lgan operatsion sistema va uning " "turli qismlari \n" "bundan buyon \"Dasturiy Mahsulotlar\" deb yuritiladi. Dasturiy mahsulotlar \n" "Mandrake Linux distributivning qismlari va operatsion sistema bilan bog'liq " "bo'lgan\n" "dasturlar to'plami, usullar, qoidalar va qo'llanmalarni o'z ichiga oladi, " "ammo bu bilan cheklanmaydi.\n" "\n" "\n" "1. Litsenziya kelishuvi\n" "\n" "Iltimos, ushbu hujjatni diqqat bilan o'qib chiqing. Bu hujjat Siz bilan " "MandrakeSoft S.A. \n" "o'rtasida Dasturiy Mahsulotlari bo'yicha imzolanadigan litsenziya " "kelishuvidir.\n" "Dasturiy Mahsulotlarni har qanday maqsad bilan o'rnatib, ko'paytirib yoki \n" "ulardan foydalanib Siz mazkur Litsenziyaning shartlari va qoidalarini to'liq " "qabul \n" "qilib, ularga rozi ekanligingizni bildirgan bo'lasiz. Agar mazkur \n" "Litsenziyaning biror qismi Sizga to'g'ri kelmasa, u holda Sizga Dasturiy " "Mahsulotlarni\n" "o'rnatish, ko'paytirish yoki ulardan foydalanishga ruxsat berilmaydi. Mazkur " "litsenziyaning \n" "shartlariga zid holda Dasturiy Mahsulotlarni o'rnatish, ko'paytirish va " "ulardan foydalanishga \n" "har qanday urinish ushbu Litsenziya asosida Sizga berilgan barcha " "huquqlarni\n" "bekor qiladi. Litsenziya kelishuvi bekor qilingach, Siz Dasturiy " "Mahsulotlarning\n" "barcha nusxalarini darhol o'chirib tashlashingiz lozim.\n" "\n" "\n" "2. Cheklangan kafolat majburiyatlari\n" "\n" "Dasturiy Mahsulotlar va ularga ilova qilingan qo'llanmalar \"o'z holicha\", " "qonunda yo'l qo'yilgan\n" "darajada hech qanday kafolatlarsiz taqdim qilinadi. MandrakeSoft S.A. " "qonunda yo'l qo'yilgan\n" "darajada hech qanday holatda Dasturiy Mahsulotlardan foydalanish yoki " "foydalonmaslik oqibatida\n" "tasodifiy, to'g'ridan-to'g'ri, bevosita yoki bilvosita etkazilgan zararlar " "(shu jumladan biznesning\n" "kasod bo'lishi, tijorat faoliyatidagi uzilishlar, moliyaviy zararlar, sud " "mahkamalari natijasidagi\n" "sud xarajatlari yoki jarimalar yoki boshqa har qanday bilvosita " "yo'qotishlar) uchun, hatto MandrakeSoft S.A.'ga\n" "shunday zarar ko'rish imkoniyati yoki holatlari ma'lum bo'lgan taqdirda " "ham,\n" "javobgar bo'lmaydi.\n" "\n" "BA'ZI MAMLAKATLARDA MAN QILINGAN DASTURIY MAHSULOTLARGA EGALIK QILISh\n" "YoKI ULARDAN FOYDALANISh BILAN BOG'LIQ ChEKLANGAN MAS'ULIYaT\n" "\n" "MandrakeSoft S.A. yoki uning tarqatuvchilari qonunda yo'l qo'yilgan darajada " "hech qanday holatda\n" "ba'zi mamlakatlarning mahalliy qonunlari bilan cheklangan yoki man qilingan " "dasturiy\n" "mahsulotlarning qismlariga egalik qilish va ulardan foydalanish, yoki " "Mandrake Linux\n" "saytlarining biridan dasturiy mahsulotning qismlarini ko'chirib olish " "oqibatida tasodifiy,\n" "to'g'ridan-to'g'ri, bevosita yoki bilvosita etkazilgan zararlar (shu " "jumladan biznesning kasod bo'lishi,\n" "tijorat faoliyatidagi uzilishlar, moliyaviy zararlar, sud mahkamalari " "natijasidagi sud\n" "xarajatlari yoki jarimalar yoki boshqa har qanday bilvosita yo'qotishlar) " "uchun javobgar bo'lmaydi.\n" "Cheklangan ma'suliyat Dasturiy Mahsulotlarga kiritiladigan kuchli " "kriptografiya qismlariga\n" "nisbatan ham qo'llaniladi, ammo bu bilan cheklanmaydi.\n" "\n" "\n" "3. GPL litsenziyasi va unga bog'liq litsenziyalar\n" "\n" "Dasturiy Mahsulotlar turli kishilar yoki tashkilotlar tomonidan yaratilgan " "qismlardan iboratdir.\n" "Ushbu qismlarning ko'pchiligi bundan buyon \"GPL\" deb ataladigan GNU " "General Public Licence\n" "shartlari va qoidalari yoki shunga o'xshash litsenziyalar ta'siri ostidadir. " "Ushbu litsenziyalarning\n" "ko'pchiligi o'z ta'siri ostidagi qismlarni Sizga foydalanish, ko'paytirish, " "moslashtirish yoki tarqatish\n" "huquqini beradi. Iltimos, har qanday qismdan foydalanishdan avval " "qismlarning har biri\n" "uchun litsenziya kelishuvining shartlari va qoidalarini diqqat bilan o'qib " "chiqing. Qismning\n" "litsenziyasiga oid har qanday savollar MandrakeSoft'ga emas, balki qismning " "muallifiga yuborilishi\n" "lozim. MandrakeSoft S.A. tomonidan ishlab chiqilgan dasturlar GPL " "litsenziyasi ta'siri\n" "ostidadir. MandrakeSoft S.A. tomonidan yozilgan qo'llanmalar esa maxsus " "litsenziya ta'siri\n" "ostidadir. Iltimos, qo'shimcha ma'lumot uchun qo'llanmalarga murojaat " "qiling.\n" "\n" "\n" "4. Intellektual mulk huquqlari\n" "\n" "Dasturiy Mahsulotlarning qismlariga oid barcha huquqlar ularning bevosita " "mualliflariga\n" "tegishli bo'lib, intellektual mulk va dasturiy mahsulotlarga oid mualliflik " "huquqi\n" "to'g'risidagi qonunlar bilan himoyalanadi. MandrakeSoft S.A. Dasturiy " "Mahsulotlarni to'liq\n" "yoki qisman, har qanday yo'l bilan va istalgan maqsadlarda o'zgartirish yoki " "moslashtirish huquqini\n" "o'zida saqlab qoladi. \"Mandrake\", \"Mandrake Linux\" va tegishli belgilar " "MandrakeSoft S.A.'ga\n" "tegishli savdo belgilaridir.\n" "\n" "\n" "5. Boshqaruvchi qonunlar\n" "\n" "Agar mazkur kelishuvning biror qismi sud qarori bilan bekor qilinsa, " "noqonuniy yoki\n" "amaldagi qonunchilikka zid topilsa, bu qism mazkur kelishuvdan chiqarib " "tashlanadi. Sizning\n" "hatti-harakatlaringiz kelishuvning boshqa yaroqli bo'limlari bilan cheklanib " "qolaveradi.\n" "Mazkur Litsenziyaning shartlari va qoidalari Frantsiya qonunchiligi ta'siri " "ostidadir.\n" "Mazkur litsenziyaning shartlari va qoidalariga oid har qanday nizolar asosan " "sudda muhokama qilinadi.\n" "So'nggi navbatda masalaning ko'rilishi tegishli Parij (Frantsiya) " "Qonunchilik sudiga havola qilinadi.\n" "Iltimos, mazkur hujjatga oid har qanday savollar bo'yicha MandrakeSoft S.A. " "bilan bog'laning.\n" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "Andoza foydalanuvchi" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "bajarish ko'rsatgichining\n" "yuqori chap burchagining koordinatasi" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "Joriy interfeysni moslash" # next_start #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Agar sizda ISA kartasi bo'lsa, keyingi oynadagi qiymatlar to'g'ri bo'lishi " "kerak.\n" "\n" "Agar sizda PCMCIA kartasi bo'lsa, kartangizning \"irq\" va \"io\" " "qiymatlarini bilishingiz kerak.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "Sinov betini bosib chiqarmash" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "Gurmuxi" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "%s'dan allaqachon foydalanilmoqda\n" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "APIC'ni taqiqlash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Bu maxfiy so'z juda qisqa (u eng kami %d belgidan iborat bo'lishi shart)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP proksi" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "Ro'yxatni o'rnatish" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "Faqat tanlangan kun uchun ko'rsatish" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 Kb" #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Izoh: Parallel portlarni avto-aniqlab bo'lmaydi)" #: ../../standalone/logdrake:1 #, c-format msgid "<control>N" msgstr "<control>N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Sizda qanday karta bor?" #: ../../standalone/logdrake:1 #, c-format msgid "<control>O" msgstr "<control>O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Xavfsizlik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "<control>Q" msgstr "<control>Ch" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "Iltimos tiklash uchun ma'lumotni tanlang..." #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "Noma'lum" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Server allaqachon ro'yxatda, uni yana qo'shib bo'lmaydi.\n" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Tarmoqni moslash" #: ../../standalone/logdrake:1 #, c-format msgid "<control>S" msgstr "<control>S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "Parametr %s son bo'lishi kerak!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "Bildirishnoma" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Siz X'ni moslamadingiz. Rostdan buni istaysizmi?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Diskni qismlarga bo'lishning qaysi turi?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "FTP orqali yuborilgan fayllarning ro'yxati:%s\n" " " #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "Interfeys" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "Ko'p seansli kompakt-disk" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "vergul bilan ajratilgan qatorlar" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Skannerlardan foydalanib bo'ladigan kompyuterlar:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "Xabarlar" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Noma'lum|CPH06X (bt878) [aksariyat ishlab chiqaruvchilar]" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "POP va IMAP serverlari" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Meksika" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Rvanda" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Shveytsariya" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Bruney Dorussalom" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Sizda %s interfeysi bormi?" #: ../../standalone/drakTermServ:1 #, c-format msgid "You must be root to read configuration file. \n" msgstr "Moslama faylini o'qish uchun siz root bo'lishingiz kerak. \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Uzoqdagi LPD printerning parametrlari" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Internetga ulanishni moslash" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Norvegiya" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Daniya" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Iltimos kompyuterning IP moslamasini kiriting.\n" "Yozuvning har qaysi nuqta bilan ajratilgan o'nlik son shaklida\n" "IP raqam bo'lishi kerak (m-n 1.2.3.4)." #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "Mandrake Linux bir nechta kompakt-disklarda tarqatiladi. DrakX\n" "tanlangan paket boshqa kompakt-diskda joylashganligini biladi,\n" "u joriy kompakt-diskni chiqaradi va tegishlisini qo'yishni so'raydi." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "Belgilansa, egasi va gurh o'zgartirilmaydi" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Bolgariya" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "Seshanba" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "Protsessorlar" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard va Yan Mayen Orollari" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "Hech qanday NIC tanlangani yo'q!" # next_start #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "diskning %s qismi endi %s sifatida ma'lum" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "Kongo (Kinshasa)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "SMB serverning IP raqami" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s diskining qismlar jadvali diskga saqlanish arafasida!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "HPOJ paketlari o'rnatilmoqda..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Latviacha" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "har oy" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Modulning nomi" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "Sistema yuklanayotganda ishga tushirish" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Diskning birinchi sektori (MRB)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Salvador" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "Joystik" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "DVD" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "Andoza sifatida Yunikoddan foydalanish" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "Parametr %s butun son bo'lishi kerak!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "Foydalanuvchilarni tasdiqlash uchun maxfiy so'zdan foydalanish" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "To'ldirish kerak bo'lgan maydonlar:\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Nomi: " #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 millionta rang (24 bit)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "Hamma foydalanuvchilarga ruxsat" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "Rasmiy MandrakeSoft do'koni" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Hajm o'zgartirilmoqda" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Drakbackup uchun ajratilgan\n" " yuqori chegarani kiriting (Mb)" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Kabel orqali ulanish" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "Foydalanuvchi" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "Nomi" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid buyrug'i muvaffaqiyatsiz tugadi." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "Fayllar yuborilmoqda..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Isroilcha (fonetik)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "RPM vositalaridan foydalanishga ruxsat etish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Printer yoki uskunani tanlashingiz yoki kiritishingiz shart!" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Telefon raqami" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Xato: Tovush kartangiz uchun \"%s\" drayveri ro'yxatda yo'q" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "Printerning nomi, ta'rifi, manzili" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama kengaytmasidan foydalanish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "G'arbiy Oyropa" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "Kompakt-diskga" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "Harddrake2 - versiya %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "Moslash" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Svazilend" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Dominikana Respublikasi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "%s'dan nusxa ko'chirilmoqda" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "Rangni tanlash" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "Suriyacha" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "UID'ni o'rnatish" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Belgilash uchun %c va %c tugmalaridan foydalaning." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "2 tugmali andoza sichqoncha" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Belgilangan band %d soniyadan kegin avtomatik ravishda yuklanadi." #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "/etc/sysconfig/bootsplash faylini yozib bo'lmadi.\n" "Fayl topilmadi." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Internetga ulanish" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarni bilish uchun \"Parametrlar " "ro'yxatini ko'rsatish\" tugmasini bosing." #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Sinov bet(lar) bosib chiqarilmoqda..." #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "%s ulash nuqtali diskning qismi allaqachon mavjud\n" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Enable/Disable msec hourly security check." msgstr "Kundalik xavfsizlik tekshiruvi" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Ukraina" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "Dastur:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Tashqi ISDN modem" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "agar \"ha\" bo'lsa, tekshiruv natijasini xat orqali yuborish" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Siz nimani tanlaysiz? (andoza: %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "Nosozliklarni topish va bartaraf qilish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Sinov bet(lar) printerga yuborildi.\n" "Printer ishini boshlaguncha biroz vaqt o'tishi mumkin.\n" "Bosib chiqarishning holati:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "har kun" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "va bitta noma'lum printer" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "Irlandiya" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " Moslamani tiklash " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "Bu to'g'rimi?" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "Moslash yordamchisi" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "Printer (\"%s\") olib tashlanmoqda" #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "Konsolda bajarilgan buyruqlar tarixining hajmi" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "DrakFloppy" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Iltimos auto_install.cfg fayli joylashgan joyni ko'rsating.\n" "Agar avtomatik ravishda o'rnatish usulini moslashni istamasangiz, buni bo'sh " "qoldiring.\n" "\n" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on other machines" msgstr "Ulanishni moslash" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Peru" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr " Uskunaga: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Windows(TM)'ni o'chirish" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "X shrift serverini (XFree'ni ishga tushirish uchun kerak) ishga tushiradi." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" "Shrift faylini yoki direktoriyani tanlang va \"Qo'shish\" tugmasini bosing" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "Sistema" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "Bu qulaylikdan foydalanishni istaysizmi?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "Arabcha" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Parametrlar:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "Maxfiy so'z kerak" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d minut" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Grafik karta: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "XFree'ni moslash" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Amalni tanlang" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Frantsuz Polineziya" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" "ALSA (Advanced Linux Sound Architecture) tovush sistemasini ishga tushirish" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "%s kartasi (%s) uchun drayver o'rnatilmoqda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Siz oldingi andoza printerni (\"%s\") uzatdingiz. U yangi bosib chiqarish " "sistemasi (\"%s\") uchun ham andoza printer bo'lsinmi?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "Serverni yoqish" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Ukraincha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "Lokal tarmoq(lar)" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "Windows'ni o'chirish" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "Fayervol kontrollerlar" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Tarmoq maskasi:" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Printerlar ro'yxatini yangilash (uzoqdagi hamma CUPS printerlarni ko'rsatish " "uchun)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Tarmoqdagi printer \"%s\", port %s" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Iltimos lokal tarmog'ingizga ulanadigan tarmoq adapterini tanlang." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "Ok - boshqa fayllarni tiklash uchun" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "Iltimos tugmalar tartibini tanlang." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "Printer uskunasining URI'i" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "O'chirib bo'lmaydigan ma'lumot tashuvchi!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Terminalda asoslangan" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "Foydalanuvchining ismi juda uzun" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Boshqa OS (window...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Printer ma'lumot bazasi o'qilmoqda..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Avto-o'rnatish diketni yaratish" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t foydalanuvchi: %s\n" "\t\t direktoriya: %s\n" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Somali" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Bu daraja oldingi darajaga o'xshaydi, ammo sistema umuman yopiq va " "xavfsizlik\n" "parametrlari eng yuqori qiymatlarga ega." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Nikaragua" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Yangi Kaledoniya" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "Oyropa protokoli (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/_O'chirish" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Video usuli" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Ummon" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "Iltimos elektron pochtangizni kiriting" #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "Tarmoqni nazorat qilish" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Yangi hajm (Mb): " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Disk qismlar jadvalining turi: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "AQSh" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", tarmoqdagi printer \"%s\", port %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "Yuborish tezligi:" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Halt xatosi" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "Xat orqali xabar berishni moslash" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Tokelau" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "Mos keladigan" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "Bosniacha" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Aloqaning tezligi" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Namibiya" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "Ma'lumot baza serveri" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "Iltimos kutib turing, xavfsizlik darajasi o'rnatilmoqda..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Noma'lum|CPH05X (bt878) [ko'p ishlab chiqaruvchilar]" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Sistema yuklanayotganda grafik muhitini ishga tushirish" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "har soat" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "O'ng Shift tugmasi" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr " %s da muvaffaqiyatli tiklandi " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "Printerning porti CUPS bilan ishlaydigan qilinmoqda..." #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua va Barbuda" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Ispancha" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "Ishga tushirish" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "root'ning to'g'ridan-to'g'ri kirishi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "Dasturlar moslanmoqda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan yoki to'g'ridan-to'g'ri tarmoqqa yoki " "uzoqdagi Windows kompyuteriga ulangan printer(lar)ingizni o'rnatishda sizga " "yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring. Tarmoqqa " "ulangan printer(lar)ingiz va Windows kompyuterlar ham yoqilgan holatda " "bo'lishi kerak.\n" "\n" "E'tibor bering, tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash " "shu kompyuterga ulangan printerlarni aniqlashdan ko'ra ko'proq vaqtni oladi. " "Shuning uchun, agar bu sizga kerak bo'lmasa, tarmoqqa ulangan printerlarni " "va/yoki Windows kompyuteriga ulangan printerlarni avtomatik ravishda " "aniqlashni o'chiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingisi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Modem orqali oddiy ulanish" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "Fayl tanlash" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "Moslash vositasini ishga tushirish" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "OS yuklagichini o'rnatish" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Diskning tub qismi Mb'da: " #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "" "Bu o'rnatilishi shart bo'lgan paket, uni tanlashni bekor qilib bo'lmaydi." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Sent-Lyusiya" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "Noyabr" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Uzish..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "Xabar berish" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Palau" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "daraja" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Paketlarni guruh bo'yicha tanlash" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Quyidagi tarmoq protokoli orqali tiklash: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "Modulning hamma parametrlarini shu erda moslashingiz mumkin." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Yangi qismni yaratib bo'lmaydi.\n" "Chunki siz diskning asosiy qismlarining maksimal soniga etingiz.\n" "Avvalo diskning asosiy qismini olib tanshlang kegin diskning kengaytirilgan " "qismini yarating." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Ulash" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "Avto-o'rnatish disketi yaratilmoqda" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "Yangilanishlarni o'rnatish" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Holati" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "%s uskunasida ma'lumot tashuvchi borligiga ishonch hosil qiling" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Lokal printer" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "Fayllar tiklandi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Paketlarni tanlash" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Mavritaniya" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Diskning hamma asosiy qismlari ishlatilmoqda" #: ../../printer/main.pm:1 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD server \"%s\", printer \"%s\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Bu tugaganidan so'ng, kompyuterning nomi bilan bog'liq bo'lgan muammolarni " "oldini olish uchun X muhitingizni boshqadan ishga tushirishni biz tavsiya " "qilamiz." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Sistemani yuklashda asbob-uskunalarni avto-aniqlash va moslash." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "O'rantish serverini moslash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "IDE'ni moslash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "Tarmoq moslanmagan" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "Modulni moslash" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kokos (Kiling) Orollari" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" "O'zgarishlar amalda qo'llanilishi uchun kompyuterni o'chirib-yoqish kerak" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Provayderning telefon raqami" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "Xostning nomi %s" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Fiji" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Armaniston" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Birinchi disket uskunasi" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "Harddrake haqida" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "Uskunaning hajmi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Disketni uskunaga qo'ying.\n" "Undagi hamma ma'lumot yo'qoladi." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Hajmi: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Bir vaqtda Ctrl va Shift tugmalari" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "Ikkilamchi" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Maxfiy so'zsiz" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Nigeriya" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s kompyuterning nomini talab qiladi...\n" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Foydalanish uchun diskning qismi mavjud emas" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Quyidagi skannerlar\n" "\n" "%s\n" "sistemangizda mavjud.\n" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Parallel portidagi (#%s) ko'p amalli uskuna" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "TCP yoki socket printerlari yordamida bosib chiqarish uchun printerning xost " "nomini yoki IP raqamini va istasangiz portning raqamini (andoza - 9100) " "kiritishingiz kerak. HP JetDirect serverlarda odatda portning raqami 9100, " "boshqa serverlarda boshqacha bo'lishi mumkin. Asbobingizning qo'llanmasiga " "qarang." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "Qattiq disk haqida ma'lumot" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Ruscha" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "Iordan" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "Fayllarni yashirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Bu kompyuterga ulangan printerlarni avtomatik ravishda aniqlash" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Uzr, disket uskunasi mavjud emas" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Boliviya" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Yomon paket" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "Sichqoncha bilan atigi bir-ikki marta bosib kompyuteringizni kuchli Linux " "serveriga aylantiring: Veb-serveri, elektron xat-xabar, fayervol, ruter, " "fayl va bosib chiqarish serveri va hokazo!" #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec asosiy parametrlari" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Izoh: agar sizda ISA PnP tovush kartasi bo'lsa, sndconfig dasturini " "ishlatishingiz kerak bo'ladi. Konsolda \"sndconfig\" buyrug'ini bajaring " "xolos." #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Ruminiya" #: ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "Guruh" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Kanada" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "uskunani tanlang" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "LVM'dan olib tashlash" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Vaqt zonasi" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Olmoncha" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "Keyingisi ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Ehtimol, diskning bu qismi\n" "drayverning qismidir.\n" "Yaxshisi unga teginmang.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Gvineya-Bissau" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "Tuzatish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "USB kontrollerlar" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Turi:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Tarmoqni boshqadan ishga tushirishda quyidagi xato ro'y berdi: \n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Loopback faylini olib tashlaymi?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Tanlangan hajm mavjud bo'lgan bo'sh joydan katta" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "NCP serverining nomi aniqlanmagan!" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "Davlatingizni tanlang." #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "Laoscha" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Samoa" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Moslangan skannerlarning ro'yxati boshqadan yaratilmoqda..." #: ../../modules/interactive.pm:1 #, fuzzy, c-format msgid "Module configuration" msgstr "Tovushni moslash" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "Skanner" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Diqqat: bu grafik kartani sinab ko'rish kompyuterni qotib qolishiga olib " "kelishi mumkin" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Foydalanuvchining ismi faqat kichkina harf, son, \"-\" va \"_\" belgilaridan " "iborat bo'lishi shart" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Krakerlarga marhamat" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Modulning parametrlari:" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "Ko'p tarmoqli fayervol bilan tarmog'ingizni himoyalang" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "Tarmoqni moslamay davom etish" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "To'xtatish" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "Uzoqdagi skannerlardan foydalanish" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norvegcha)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Turi: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- Klientni tuzatish" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "Shriftlar topilmadi" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Sichqoncha" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "/boot direktoriyasida etarli joy yo'q" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Lixtenshteyn" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Kompyuterning nomi" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "bajarish ko'rsatgichining rangi" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "RAID'ga qo'shish" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "Star Office/OpenOffice.org/GIMP dasturlariga \"%s\" printerni qo'shish " "muvaffaqiyatli tugadi." #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "Disket uskunasi mavjud emas!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarni bilish uchun quyidagi " "ro'yxatni o'qing yoki \"Parametrlar ro'yxatini ko'rsatish\" tugmasini " "bosing. %s%s%s\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Saudiya Arabistoni" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Bunga qaramasdan davom etaymi?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Agar siznig printeringiz ro'yxatda bo'lmasa, unga mos keladigan (printerning " "ko'llanmasiga qarang) yoki unga o'xshash printerni tanlang." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Printer" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "Internet" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "Ba'zi bir uskunalar qo'shildi:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometriya: %s tsillindr, %s kallacha, %s sektor\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Printer (%s) yordamida bosib chiqarilmoqda..." #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow va /etc/hosts.deny fayllari allaqachon moslangan - " "o'zgartirilmadi" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "Magnit tasmasidan tiklash" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" "Maxfiy so'zning eng qisqa uzunligi, undagi sonlarning va bosh harflarning " "soni" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" "\n" "\n" "Agar andoza kompyuterning nomidan foydalanishni istamasangiz, Zeroconf " "kompyuterning nomini kiriting." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Ulash nuqtalari faqat son yoki harflardan iborat bo'lishi mumkin" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "Bosib chiqarish sitemasi boshqadan ishga tushirilmoqda..." #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Asbob-uskuna haqida ma'lumotga qarang" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "Kun" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Diskning yuklash qismining birinchi sektori" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "Printerning ishlab chiqaruvchisi, modeli" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Navbatga qo'ymasdan bosib chiqarish" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "O'zgartirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s <file>\".\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "Kompyuterning nomi, foydalanuvchi va maxfiy so'z kerak!" #: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "Disketni qo'ying" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "yangi" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "Boshqadan urinib ko'rishni istaysizmi?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Yordamchi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "Tanlangan serverni tuzatish" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Diskning qisimlar jadvaliga kiritilgan o'zgarishlar kuchga kirishi uchun " "kompyuterni o'chirib-yoqishingiz kerak." #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "Bauzerning keshini kiritmash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "%s fayl sistemasini tekshirish muvaffaqayatsiz tugadi. Xatolarni tuzatishni " "istaysizmi? (esingizda tursin, siz ma'lumotni yo'qotishingiz mumkin)" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Iltimos tugmalar tartibini tanlang." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Andoza" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Iltimos sichqonchaning turini tanlang." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "Ulanish..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Printerni (\"%s\") moslash muvaffaqiyatsiz tugadi!" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "moslanmagan" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "Haqida" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Proksilarni moslash" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Boshi: sektor %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "Maskasiz" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "Tarmoq interfeysi allaqachon moslangan" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "Xat-xabar serveri" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Iltimos diskning qismini bosing" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "HP JetDirect'dagi ko'p amalli uskuna" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "Kuningiz maroqli o'tsin!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "%s'ni yangilash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Printerga ulanishni tanlang" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "FTP orqali yuborishda xato ro'y berdi.\n" "Iltimos FTP moslamalaringizni to'g'rilang." #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "IP chegarasining boshi:" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "bajarish ko'rsatgichining balandligi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- %s orqali %s xostida saqlash\n" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Argentina" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "DNS serveri" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "Xavfsizlik darajasi:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Ulash nuqtalari \"/\" belgisi bilan boshlanishi shart" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "Kompakt-disk/DVD uskunasini tanlang (Mb)" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "Postfix xat-xabar serveri" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Saqlamasdan chiqish" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Yaman" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "Bu mahsulot MandrakeStore veb-saytida bor." #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Tanlash uchun ko'p narsa bor (%s).\n" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Qattiq diskni aniqlash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Siz hech qanday paketlar guruhini tanlamadingiz.\n" "Iltimos siz istagan minimal o'rnatishni tanlang:" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Iltimos WebDAV serverining URL'ini kiriting" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Tojikiston" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Qabul qilish" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "Ta'rifi" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Yozish uchun %s'ni ochishda xato: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Sichqonchaning turi: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Monitorni tanlash" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Bo'sh belgini ishlatish mumkin emas" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "Malta (Buyuk Britaniya)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Men boshqa qism qo'sholmayman" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Hajmi (Mb): " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Uzoqdagi printer" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "Iltimos foydalanish uchun tilni tanlang." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Men kompyuteringizni sistemaga bitta foydalanuvchi avtomatik ravishda " "kirishga moslashim mumkin." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "Disketning formati" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "Andoza printerlar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Iltimos bosib chiqarish vazifalari yuboriladigan printerni tanlang yoki " "uskunaning/faylning nomini kiriting." #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" "Bu kompyuterdagi skannerlarni boshqa kompyuterlardan ham ishlatsa bo'ladi" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "Tub qismining birinchi sektori" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "Boshqa drayverlar" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Sizga kerak bo'lgan parametrlarni tekshiring.\n" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Keyp Verde" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Loading printer configuration... Please wait" msgstr "Printerning moslamalari yuklanmoqda, iltimos kutib turing..." #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Guam" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Iltimos printeringiz ulangan portni tanlang yoki uskunanig/faylning nomini " "kiriting." #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Parametrlar/Sinash" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "Disk qismi (%s) ulanmoqda" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Foydalanuvchi" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Linux4Win uchun diskning qaysi qismini ishlatmoqchisiz?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Sinov betlari" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Tiklash uchun ma'lumotlar ro'yxati:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "%s tekshirilmoqda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket printerning parametrlari" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Kartaning xotirasi (DMA)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "Internet bilan aloqa uzilmoqda" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Frantsiya" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "o'tish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "O'rnatilgan dasturlar tekshirilmoqda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "Uzoqdagi printerning nomi aniqlanmagan!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Turkiya" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "Tugmalar soni" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vetnamcha \"raqamli qator\" (qwerty)" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Modul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "Asbob-uskunalar" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Bir vaqtda Ctrl va Alt tugmalari" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Qo'shma Shtatlar" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Andoza OS?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Shvetsariya (Olmoncha)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "NTP serveri" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "Disketdan/ga yuklash/saqlash" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "Bu mavzu uchun %s'da hali bootsplash yo'q!" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "yaxshi" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "%d soniyadan kegin yopiladi" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Iltimos, modem ulangan ketma-ket portini tanlang." #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "Egalik" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "Lokal tarmoqni moslash" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Gana" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "Yo'l yoki modul kerak" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "Boshqa parametrlar" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "Moslamani ko'rish" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "Vergul xatosi" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Quyidagi paketlarni o'rnatishda xato ro'y berdi:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark inkjet printerini moslash" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Amalni bekor qilish" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Diskning qismlar jadvalini saqlash" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Fincha" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Makedoniya" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Slovencha" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "Libiya" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" "Skriptlar moslanmoqda, dasturlar o'rnatilmoqda, serverlar ishga " "tushirilmoqda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "\\#%s parallel portidagi printer" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Kompakt-diskga yozish" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Jadval" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s'ni %s turida qanday format qilishni bilmayman" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "Model" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "USB printer \\#%s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "Serverni to'xtatish" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" "\n" "Lilo va bootsplash uchun\n" "mavzuni tanlang,\n" "ularni alohida-alohida\n" "tanlashingiz mumkin" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "Modem" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Avto-aniqlashdan foydalanish" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Sistema yuklanganda ishga tushirilgan" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" "Uzoqdagi kompyuterda mavjud bo'lgan printerlarni avtomatik ravishda aniqlash" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Sharqiy Timur" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "Magnit tasma uskunasiga" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- %s uskunadagi magnit tasmaga saqlash" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "Foydalanuvchi" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "Foomatic dasturi o'rnatilmoqda..." #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Iltimos bu erdan chiqing va Ctrl-Alt-BackSpace tugmalarni bosing" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "topildi" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "" "Tarmoqni boshqadan ishga tushirish kerak. Uni boshqadan ishga tushirishni " "istaysizmi?" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "Paket: " #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "/etc/sysconfig/bootsplash faylini yozib bo'lmadi." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "XAVFSIZLIK OGOHNOMASI!" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Yo'q, avtomatik ravishda sistemaga kirishni istamayman" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "Hamma tillar" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "%s olib tashlanmoqda" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s not found...\n" msgstr "%s topilmadi...\n" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Aloqa sinab ko'rilmoqda..." #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "Keshning hajmi" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Boshlang'ich sektor: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongo (Brazzaville)" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "O'qish" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Paket (%s) o'rnatilishi kerak. Uni o'rnatishni istaysizmi?" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Seyshel Orollari" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Sistemangizga bitta noma'lum printer to'g'ridan-to'g'ri ulangan." #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "O'ng Ctrl tugmasi" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "Iltimos %s uskunasiga formati FAT bo'lgan disketni qo'ying" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Zambiya" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "Xavfsizlik boshqaruvchi (foydalanuvchi yoki elektron pochtasi)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "Rumincha (qwerty)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Misr" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Chex Respublikasi" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Tovush karta" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "Shriftlarni import qilish" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Diskingiz bitta katta MicroSoft Windows qismidan iborat.\n" "Avvalo, uning hajmini o'zgartirishni taklif qilaman\n" "(uni bosing kegin \"Hajmini o'gartirish\" tugmasini bosing)." #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "Vaqtinchalik fayllarni o'chirish" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Tabriklaymiz, tarmoqni va Internetni moslash tugadi.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Diskning qismining turini o'zgartirish" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "Tarmoqning parametrlari" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Mavzularni\n" "konsolda ko'rsatish" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "Statistika" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(%s'da)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "o'rtachasi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "Yangi printerning nomi" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatorial Gvineya" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "<file>\" or \"%s <file>\".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "Rumincha (qwertz)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "Moslamani yozish" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Kiribati" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech sichqoncha (ketma-ket, eski C7 turi)" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "Tanlash" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "Kompakt-disk" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Internetga ulanishga urinib ko'rishni istaysizmi?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Belgiacha" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "Sizda ISA tovush kartasi bormi?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Sizning sistemangizda ethernet tarmoq adapteri topilmadi.\n" "Men aloqaning bunday turini o'rnatolmayman." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "Windows" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "Kompyuterning nomi" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Fayl/...sifatida s_aqlash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Andoza tasvirni yuklashdan oldin kutish vaqti" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "Sharqiy Oyropa" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Bo'sh joydan foydalanish" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "dhcp'dan foydalanish" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "Xat orqali xabar berish" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Internetni moslash" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "O'zbekiston" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "%s aniqlandi" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "/Printerlarni _avto-aniqlash" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Tayyor" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "Avtomatik ravishda tanlangan paketlarni ko'rsatish" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Togo" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 Mb" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Iltimos yana urinib ko'ring" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "To'g'ri model" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Diskning FAT qismining hajmini o'zgartirish muvaffaqiyatsiz tugadi: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Paketlarni bittama-bitta tanlash" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Diskning bu qismining hajmini o'zgartirib bo'lmaydi" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "Manzili" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Gvatemala" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Jurnalli FS" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "Shu kompyuter" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS diskining harfi: %s (tavakkaliga)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Bahrayn" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Fayllarni yoki direktoriyalarni tanlang va \"Ok\" tugmasini bosing" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "SCSI modullarsiz" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "protsessorning oilasi (m-n: i686 sinfi uchun 6)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Tarmoqdan o'rnatayotganingiz uchun tarmoq allaqachon moslangan.\n" "Tarmoqni moslamalarini saqlab qolish uchun \"Ok\" tugmasini bosing, " "Internetga va tarmoqga ulanishni boshqadan moslash uchun \"Bekor qilish\" " "tugmasini bosing.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "Kundalik xavfsizlik tekshirishlarini bajarish" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tugmalar tartibi: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "Malta (AQSh)" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "Sistemani yukash disketi muvaffaqiyatli bajarildi.\n" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "Yordamchini ishga tushirish" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "TV karta" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "Odiy/ekspert usuliga o'tish" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Hajmi" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "GRUB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Grenlandiya" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "Payshanba" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "Hamma NBI'larni o'chirish" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "XFree'ning qanday moslamasini istaysiz?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Ko'proq" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Xavfsizlikning bu darajasida sistemani server sifatida ishlatish mumkin.\n" "Sistemani bir qancha klientlar bilan aloqa o'rnata oladigan server sifatida " "ishlatish uchun xavfsizlik darajasi etarlicha yoqori.\n" "Izoh: agar kompyuteringizni Internet tarmog'ida klient sifatida " "ishlatsangiz, pastrog' darajani tanlang." #: ../../standalone/printerdrake:1 #, c-format msgid "Server Name" msgstr "Serverning nomi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Maxfiy so'z" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "Tojikcha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "Shriftlarning ro'yxati" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Faylni tanlash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Yaponiya" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "Parametrlar ro'yxatini ko'rsatish" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "O'zgarishlar bajarildi, ammo amalda to'liq qo'llanilishi uchun siz " "chiqishingiz kerak." #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "Davlat / Region" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "Serverlarni qidirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "NCP navbatning nomi aniqlanmagan!" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "\"%s\" belgili kompakt-disk" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "Kompyuteringizni ishonchli serverga aylantiring" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Bo'sh maxfiy so'zni /etc/shadow faylida tekshirish" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (drayver %s)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback fayl(lar):\n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Men bilmayman" #: ../../services.pm:1 #, fuzzy, c-format msgid "Start when requested" msgstr "Start Menu" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP xost \"%s\", port %s" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "Telegu" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Sizning kartangiz %s\"%s\" drayverini ishlatmoqda (kartangizning andoza " "drayveri \"%s\")" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "Internetga ulanayapman " #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr " (" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "Cpuid' ning darajasi" #: ../../printer/main.pm:1 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novell serveri \"%s\", printer \"%s\"" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "Mug'ulcha (kiril)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Modulni qo'shish" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "Lokal ko'rsatgich" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Foydalanuvchi" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "Fdiv xatosi" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewall moslagich\n" "\n" "Davom etishdan oldin tarmoqni/Internetni drakconnect\n" "bilan moslaganingizga ishonch hosil qiling." #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Urugvay" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Benin" #: ../../printer/main.pm:1 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows serveri \"%s\", printer \"%s\"" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "Yo'lni tanlash" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "Kompyuterning nomi/IP raqami:" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Custom & system settings" msgstr "Qo'shimcha va sistema moslamalari" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "Kompyuterning nomi yoki IP raqami aniqlanmagan!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "%s printerdrake yordamida moslanishi kerak.\n" "Printerdrake dasturini Mandrake boshqaruv markazining \"Asbob-uskunalar\" " "bo'limidan ishga tushirishingiz mumkin." #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "Yaponiya (kabel)" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "Boshlang'ich sinovlar" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Davom etish" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "Shanba" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "\"%s\": agar sistemangizda tovush kartasi aniqlansa u shu erda " "ko'rsatiladi.\n" "Agar ko'rsatilgan tovush kartasi sistemangizdagi tovush kartasi\n" "bilan mos kelmasa, tugmani bosib boshqa drayverni tanlashingiz mumkin." #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the root umask." msgstr "root uchun maxfiy so'z" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "Skriptda asoslangan" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "%s faylini o'qishda xato ro'y berdi" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Sizda /boot/efi nuqtasiga ulangan diskning FAT qismi bo'lishi shart" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr " da " #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL http:// yoki https:// bilan boshlanishi shart" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Boshqa OS (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "O'rnatish/Yangilash" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d paket" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Kosta Rika" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown <mbrown\\@fensystems.co.uk>\n" "\n" msgstr "" "\n" "\n" " Raxmatnoma:\n" "\t- LTSP loyihasi http://www.ltsp.org\n" "\t- Maykl Braun <mbrown\\@fensystems.co.uk>\n" "\n" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "Serverlar uchun libsafe'dan foydalanish" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "Islandcha" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Foydalanish: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Drakbackup uchun ajratilgan\n" " yuqori chegarani kiriting (Mb)" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Lilo/grub usuli" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Martinika" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "Qatiq disk / NFS" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "Foydalanuvchilarning eski ro'yxati:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "son" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Shvedcha" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Qaysi %s drayverni sinab ko'ray?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Agar tanlangan xizmatlarning ishi to'xtasa sizga xabar jo'natiladi" #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "Havta kuni" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Fayl sistemaning turlari:" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Shimoliy Mariana Orollari" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", HP JetDirect'dagi ko'p amalli uskuna" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "yo'q" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "Disket" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "OS yuklagichi" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Ko'chirish" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "OS yuklagichi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "SMB serverning xosti" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "Nom serverlari:" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "Minut" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Expert mode" msgstr "/_Ekspert usuli" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" "Bu printerni Star Office/OpenOffice.org/GIMP dasturlaridan olib tashlash" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Mikroneziya" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 milliardta rang (32 bit)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "Litsenziya" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "Kalitlarni yaratish bir oz vaqtni olishi mumkin." #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "<span foreground=\"royalblue3\">Standard</span>: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "<span foreground=\"royalblue3\">High</span>: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "<span foreground=\"royalblue3\">Higher</span>: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Printerni avto-aniqlash (lokal, TCP/Socket va SMB printerlar)" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (pppoa'ni ishlatib) usb" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Sistema yuklanayotganda ulanishni istaysizmi?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "Protsessorning ID-si" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "Tovush nosozliklarini topish va bartaraf qilish" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Polyakcha (qwerty)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Add Printer" msgstr "/_Printerni qo'shish" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "Xost \"%s\", port %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Diskning bu qismini loopback uchun ishlatib bo'lmaydi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Fayl allaqachon mavjud. Ishlataymi?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "qabul qilingan: " #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "O'ng Alt tugmasi" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "Tovush kartasi uchun boshqa drayverlarning ro'yxati" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Geytvey" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Tonga" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Tunis" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Uskuna haqida ma'lumotni bu erda ko'rish uchun uni chap tarafdagi ro'yxatdan " "tanlang." #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "Avto-kirishga ruxsat etish/etmash." #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XavTV o'rnatilmagan!" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Belgi allaqachon ishlatilgan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga yoki to'g'ridan-to'g'ri tarmoqqa ulangan printer" "(lar)ingizni o'rnatishda sizga yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring. Tarmoqqa " "ulangan printer(lar)ingiz ham yoqilgan holatda bo'lishi kerak.\n" "\n" "E'tibor bering, tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash " "shu kompyuterga ulangan printerlarni aniqlashdan ko'ra ko'proq vaqtni oladi. " "Shuning uchun, agar bu sizga kerak bo'lmasa, tarmoqqa ulangan printerlarni " "avtomatik ravishda aniqlashni o'chiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingisi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "Grekcha (politonik)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismi format qilgandan kegin u erdagi hamma ma'lumot yo'qoladi" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "Ulanish vaqti: " #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Andoza foydalanuvchini tanlang:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Gabon" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Uzoqdagi CUPS serveridagi printerlarni moslashingiz shart emas, ular " "avtomatik ravishda aniqlanadi." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Kerak bo'lsa, RAM'ning aniq hajmi (%d Mb topildi)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "Provayderning DNS 2 (tanlasa bo'ladi)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Sistemani yuklash uskunasi" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Diskning qaysi qismining hajmini o'zgartirmoqchisiz?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Kichik Uzoqlashgan Orollar Qo'shma Shtatlari" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Jibuti" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "%s portida topildi" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Grafik karta: %s\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/Set as _Default" msgstr "/_Andoza deb belgilash" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "Splash' ni tanlash" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "ISDN'ni moslash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "yuqori" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Faylni tanlash" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Summary: " msgstr "Hisobot" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "Kundalik xavfsizlik tekshiruvi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "Printerning andoza moslamalari" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "G'ildirakli andoza PS2 sichqoncha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Eski printer (\"%s\") olib tashlanmoqda" #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "Uskunani tanlang!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "Tanlangan serverni olib tashlash" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (dhcp'ni ishlatib) usb" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Frantsiyaning Janubiy Erlari" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "Protsessorni ishlab chiqargan firmaning nomi" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "%s paketi o'rnatilmoqda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "Uskuna tekshirilmoqda va HPOJ moslanmoqda..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Diskda kengaytirilgan qism yaratish uchun iltimos bitta qismni o'chiring" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "O'rnatilishi kerak bo'lgan paketlarni tanlang" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s diskning barcha qismlari va ulardagi barcha ma'lumot o'chiriladi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Sistemangizda o'rnatish yoki yangilash uchun etarli joy qolmadi (%d > %d)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Har qanday printerning nomi bo'lishi shart (m-n \"printer\"). \"Ta'rifi\" va " "\"Manzili\" maydonlarni to'ldirish shart emas. Ular foydalanuvchilar uchun " "izoh sifatida ishlatiladi." #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Butan" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Tarmoqning interfeysi" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "Internetdan uzilish muvaffaqiyatsiz tugadi." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "Printer haqida ma'lumot o'qilmoqda..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "Koreyscha" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Ulanmagan" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Grekcha" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Sent-Kristofer va Nevis" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Andoza 3 tugmali sichqoncha" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" "Hajmi 16 Mb'dan kichik bo'lgan qismlar uchun JFS fayl sistemasini ishlatib " "bo'lmaydi" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitorning VertRefresh: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Ulash nuqtasi" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Xato ro'y berdi:\n" "%s\n" "Ba'zi bir parametrlarni o'zgartirib sinab ko'ring" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP xost \"%s\", port %s" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "Foydalanuvchi :" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "Sistemani tiklash" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "DHCP'ning oxirgi IP'si" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "Boshqasi" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Kolumbiya" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Reyunion" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Tafsilotlar" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "Tenglashtirish asbobi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "Sistemangiz tekshirilmoqda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "Bosib chiqarish" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Mug'iliston" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Ulangan\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS" msgstr "CUPS'ni moslash" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "Grafik interfeys" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "Foydalanuvchilarni tiklash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "%s uchun kodlash kaliti" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you want to recover your system?" msgstr "aboot dasturidan foydalanishni istaysizmi?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "Aniqlangan asbob-uskunalar" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Mavrikiy" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "Myanmar (Birma)" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Loopback sifatida ishlatish uchun diskda FAT qism yo'q (yoki etarli joy yo'q)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Armancha (eski)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "%s nomli printer %s uchun allaqachon mavjud.\n" "Uni almashtirish uchun \"Uzatish\" tugmasini bosing.\n" "Printerning boshqa nomini kiritishingiz yoki uni o'tkazib yuborishingiz ham " "mumkin." #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr ", xost \"%s\", port %s" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Monako" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Diskni bo'lish muvaffaqiyatsiz tugadi: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s turida %s'ni format qilish muvaffaqiyatsiz tugadi" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "Kanada (kabel)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "Disketni yaratish bajarildi" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "Yangilash" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "Ish stantsiyasi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "%s paketi o'rnatilmoqda\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Qirg'iziston" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "USB portidagi ko'p amalli uskuna" #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "Asosiy qo'llanmalar bilan" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Sizda diskning tub qismi bo'lishi shart.\n" "Buning uchun, diskda yangi qism yarating (yoki borini tanlang).\n" "Kegin, \"Ulash niqtasi\" amalini tanlang va uni \"/\"ga o'rnating" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "G'arbiy Saxara" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Proksi \"http://...\" bo'lishi kerak" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Janubiy Afrika" #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "Printerning moslamalarini o'zgartirish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Diskning qismini tanlash" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "Joriy qoidani tuzatish" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "%s" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Iltimos sichqonchani sinab ko'ring" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "Yopishqoq bit" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "Boshqa ma'lumot tashuvchisi" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Sektor" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Qatar" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Bu paketni tanlolmaysiz, chunki uni o'rnatish uchun etarli joy mavjud emas." #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "Avto-o'rnatish disketni yaratish" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Sistemani yuklashda /tmp direktoriyasini bo'shatish" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Malavi" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: false" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "System settings" msgstr "Sistema moslamalari" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "Iltimos sichqonchaning turini tanlang." #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "asbob-uskunanig sinfi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Quyidagi kompyuterlar va tarmoqlar shu kompyuterga ulangan printer(lar)dan " "foydalanishi mumkin:" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Buyuk Britaniya" #: ../../services.pm:1 #, c-format msgid "running" msgstr "ishlayapti" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "Indoneziya" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "andoza" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "Frantsiya [SECAM]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "chegaralash" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "bo'lishi shart" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Senegal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "Buyruq" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "Mart" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "boshqaruv fayllariga ruxsat" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Montserrat" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Svop" #: ../../standalone/drakperm:1 #, c-format msgid "Custom settings" msgstr "Qo'shimcha moslamalar" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "Boshqani tiklash" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "TV karta" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT serveridagi printer" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Configure CUPS" msgstr "/CUPS'ni _moslash" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "Tanlangan xostni/tarmoqni olib tashlash" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "O'zbekcha (kiril)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Bu erda, turli tugmalar tartibini tanlash imkoniyatini\n" "yaratuvchi tugma yoki tugmalar birikmasini tanlashingiz\n" "mumkin. (m-n: lotin va lotin emas)" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "Kompakt-diskdan tiklash" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Iltimos, Internetga ulanish uchun qaysi tarmoq adapteridan foydalanishni " "tanlang." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "Mualliflar: " #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Lotin Amerikacha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "Yapon matnlarini bosib chiqarish usuli" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "Uskunaning eski fayli" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Ma'lumot: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Tugma \"%s\": %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Iltimos kutib turing" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "Yo'q" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "Kiritilgan IP noto'g'ri.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Ethernet karta" #: ../../standalone/printerdrake:1 #, c-format msgid "Delete selected printer" msgstr "Belgilangan printerni o'chirish" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Ma'lumot" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "O'rnatish" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Bu diskdagi barcha ma'lumotni va diskning barcha qismlarini o'chirish uchun\n" "\"%s\"ni bosing. Ehtiyot bo'ling, \"%s\"ni bosganingizdan kegin\n" "diskdagi ma'lumotni va diskning qismlarini, shu jumlada Windows ma'lumotini\n" "ham, tiklab bo'lmaydi.\n" "\n" "Ma'lumotni va diskning barcha qismlarini yo'qotmasdan bu operatsiyani " "to'xtatish\n" "uchun \"%s\"ni bosing." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "O'rnatishdan chiqish" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "Uzoqdagi CUPS serveri" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Sun - sichqoncha" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Sistemangizda faqat bitta moslangan tarmoq adapteri bor:\n" "\n" "%s\n" "\n" "Men shu adapter bilan lokal tarmog'ingizni o'rnataman." #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "Minimal o'rnatish" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Efiopiya" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "Devanagari" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Jami: %d / %d Mb" #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "o'chirilgan" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "Yangi skannerlarni qidirish" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s'ni o'rnatish muvaffaqiyatsiz tugadi. Quyidagi xato ro'y berdi:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Buyruqni, mkinitrd -f /boot/initrd-%s.img %s, bajarib bo'lmadi." #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Tarmoqdagi printer (TCP/Socket)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Sistemani o'rnatish" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Birinchi DNS serveri (tanlab bo'ladi)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "Istasangiz, uskunaning/faylning nomini ko'rsatishingiz mumkin." #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server.<SERVER_LEVEL>.\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "Ruscha (fonetik)" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "dhcpd'ni moslash" #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub dasturini o'rnatish" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "Isroilcha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "\"%s\" printer \"%s\" serverda" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "Disketni endi olishingiz mumkin" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "Haqiqiy minimal o'rnatish" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Daniya" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Diskning qismi ko'chirilmoqda..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "(Bu) DHCP serverning IP raqami" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Moslamalarni sinab ko'rish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "\"%s\" o'rnatilmoqda..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "Fayl sistemangizning kodlash kalitini tanlang" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Serra-Leone" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Botsvana" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Andorra" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(andoza qiymati: %s)" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "Boshqa sinov beti (Xat)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "DHCP serverni moslash.\n" "\n" "Bu erda DHCP serverini moslash uchun turli parametrlarni tanlashingiz " "mumkin.\n" "Agar biror parametrning ma'nosini bilmasangiz, uni shunday qoldiring.\n" "\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "X serverini tanlang" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Diskning swap qismi Mb'da: " #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Format qilingan\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "O'rnatishning turi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "\"%s\" printer \"%s\" SMB/Windows serverida" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "%d vergul bilan ajratilgan sonlar" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "Avtomatik bosqichlarni moslash" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Barbados" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" "Ko'proq ma'lumotga ega bo'lishni va Open Source uyushmasiga o'z hissangizni " "qo'shishniistaysizmi? Bepul dasturlar olamiga o'z hissangizni qo'shing!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "Ulanish muvaffaqiyatsiz tugadi.\n" "Moslamangizni Mandrake boshqaruv markazida tekshiring." #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "qabul qilingan" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Fayl/_Yangi" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "DNS serverining IP raqami" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "IP chegarasining oxiri:" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Yuqori" #: ../../standalone/printerdrake:1 #, c-format msgid "Add a new printer to the system" msgstr "Sistemaga yangi printerni qo'shish" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "Videosiz" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "bu maydon uskunani ta'riflaydi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Star Office/OpenOffice.org/GIMP dasturlariga printer qo'shilmoqda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "Lokal printerlar" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "NIS serveri" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "Port: %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Ispaniya" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Foydalanuvchining ismi allaqachon qo'shilgan" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "Faylni tanlang" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Qo'llash" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "Mavjud portlarni avtomatik ravishda topish" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "San-Marino" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Belgiya" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Kuvayt" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Oynalar boshqaruvchisini tanlang:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "Dekabr" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "Dastlabki kirish yordamchisi" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "Tayvan" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Pokiston" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "Muhimligi: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "Huquqlar" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Provayderning nomi (m-n provider.net)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Loopback uchun diskning Windows qismini ishlatish" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Armancha (yozish moshinasi)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Ulanishning turi: " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "Grafik interfeys" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Chad" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "Hindiston" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Slovakiya" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Singapur" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Kambodja" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitorning HorizSync: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "Yo'l" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Vazifani printerga to'g'ridan-to'g'ri jo'natiishni o'rniga uni istagan " "buyrug'ga ulash (pipe) mumkin. Bu erda o'sha buyrug'ni kiritishingiz mumkin." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Printer %s\n" "Bu printerning nimasini o'zgartirishni istaysiz?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "Kompyuterni qo'shish" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Agar sizning tovush kartangizga to'g'ri keladigan drayverni rostdan " "bilsangiz,\n" "uni yuqoridagi ro'yxatdan tanlashingiz mumkin.\n" "\n" "Sizning \"%s\" tovush kartangizning joriy drayveri \"%s\" " #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Printer (\"%s\") moslanmoqda..." #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "Internetga ulanish" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s modulini yuklash muvaffaqiyat siz tugadi.\n" "Boshqa parametrlar bilan yana urinib ko'rishni istaysizmi?" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "Open Source olamiga marhamat." #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosniya va Gertsogovina" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Bu ulash nuqtasi uchun haqiqiy fayl sistemasi (ext2/ext3, reiserfs, xfs, " "yoki jfs) kerak\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Kompyuterning nomini yoki IP raqamini kiritishingiz kerak.\n" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Niderlandlar" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "Fayllar FTP orqali yuborilmoqda" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Ichki ISDN karta" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Sizning %s tovush kartangizga, joriy holda %s drayveri ishlatilmoqda, ma'lum " "bo'lgan boshqa OSS/ALSA drayveri mavjud emas." #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "Sarlavha" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "Shriftlarni o'rnatish va aylantirish" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "DIQQAT" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "OS yuklagichi o'rnatilmoqda" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "qaytarish" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "%s topildi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Virginiya Orollari (AQSh)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Printerlaridan foydalanmog'chi bo'lgan kompyuterning IP raqamini va portini " "kiriting." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "Buyrug'ga ulash" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Gaiti" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Uskunalar aniqlanilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Maydonlarning ta'rifi:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "Basic options" msgstr "Asosiy parametrlar" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "protsessorning nomi" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "Printer ma'lumoti yangilanmoqda..." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "Siz %s'ni ham format qilishingiz kerak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Ehtiyot bo'ling: bu operatsiya xavfli." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "Paketlar tanlovi mavjud bo'lgan disketni qo'ying" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "Server: " #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "Xafvsizlik xabarnomasi:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Shvetsiya" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Polsha" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "Boshqa portlar" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "SMBus kontrollerlar" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "Aloqa taymauti (soniyada)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Xorvatcha" #: ../../help.pm:1 #, c-format msgid "Use existing partition" msgstr "Diskda bor qismlardan foydalanish" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "Oyna (%s)bilan aloqa o'rnatib bo'lmadi." #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Yordam/_Haqida" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "Tiklashdan oldin foydalanuvchilarning direktoriyalarini o'chirish." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "CUPS printerini moslash" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "ulangan qismlarda hech qanday shrift topilmadi" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "F00f xatosi" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Root umask" msgstr "" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "Disketga" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "Konsoldan kompyuterni o'chirib-yoqish" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "Tiklash" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Mavjud bo'lgan paketlar qidirilmoqda..." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Kipr" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "Aloqa o'rnatildi." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "RAID'dan olib tashlash" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Kodlash kaliti judda sodda (u eng kami %d belgidan iborat bo'lishi shart)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "Moslash yordamchilari" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "ISDN orqali ulanish" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "Kompakt-disk / DVDROM" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "Asosiy" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Niue" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "O'tkazib yuborish" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "Mandrake Linux uchun printerni boshqarish vositasi" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "muhim" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Aruba" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "Foydalanuvchilar" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "OS yuklagichi tayorlanmoqda..." #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "Geytvey (m-n %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Maxfiy so'zlar mos kelmaydi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "To'g'ri IP raqamlarning misoli:\n" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "Iltimos sichqonning turini tanlang." #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "Chastota (MGts)" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "protsessorlar soni" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Do you want to start a new configuration ?" msgstr "Yangi moslashni boshlashni istaysizmi?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Faylning nomini kiriting" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Iltimos printeringiz ulangan portni tanlang." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Kompakt-diskni almashtiring" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Paragvay" #: ../../network/netconnect.pm:1 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Moslash bajarildi, moslamalarni qo'llashni istaysizmi?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" "Sizning \"%s\" tovush kartangiz uchun ma'lum bo'lgan drayver mavjud emas." #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "majburiy" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Chiqish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "IZOH: Printerning modeliga va bosib chiqarish sistemasiga bog'liq ravishda " "hajmi to %d Mb bo'lgan qo'shimcha dasturlar o'rnatiladi." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Sizda moslangan interfeys yo'q.\n" "Avvalo, ularni \"Moslash\"ni bosib moslang." #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Estoncha" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "Kompakt-disk yozgich uskunasining nomini kiriting\n" " m-n: 0,1,0" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "HAMMASI" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "Klientlarni qo'shish/o'chirish" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Tarmoq interfeysini tanlash" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "Noma'lum model" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "Yozadigan kompakt-disk/DVD" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "Tasvirni tanlash" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Ulanishning nomi" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "matn oynasining x koordinatasi\n" "belgilar sonida" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "Paketlar tanlovi yangilanmoqda" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "%s loopback faylini qaerga ulamoqchisiz?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Disket muvaffaqiyatli yaratildi.\n" "Endi, o'rnatishni qaytarishingiz mumkin." #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "sichqonchadagi tugmalar soni" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "Qaytarish" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Hech qanday disket uskunasi mavjud emas" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "TV formati:" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "Cpuid oilasi" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 Mb" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: thin" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Litvacha AZERTY (yangi)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Boshqa OS (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Sichqonchani ishga tushirish uchun," #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Tarmoq ishga tushirilmoqda" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "Tanzaniya" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "FAT fayl sistemasining bog'lari hisoblanmoqda" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "boshqa" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Faylning tarkibi" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "Tasdiqlovchi LDAP" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "Boshqa drayverni tanlash" #: ../../standalone/net_monitor:1 #, c-format msgid "Profile " msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "yuborilgan" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "Falastin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "%d vergul bilan ajratilgan qatorlar" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr " isdn" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "Mavzuning nomi" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/_Yordam" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "Ixtiyoriy drayver tanlanmoqda" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Kuk Orollari" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Bu erda, bu kompyuterga ulangan skannerdan boshqa kompyuter va qaysi " "kompyuter foydalansa bo'ladimi-yo'qmi tanlashingiz mumkin." #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "bajarish ko'rsatgichining eni" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Diskning qismi (%s) format qilinmoqda" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "Xostning homi kerak" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "O'rnatilgan shriftlarni belgilashni bekor qilish" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "G'ildirakli" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Submit kernel version" msgstr "Internet stantsiya" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakgw:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/logdrake:1 #: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Bekor qilish" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "Moslangan skannerlar qidirilmoqda..." #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "Video karta" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "Tanlanganni olib tashlash" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "/_Modemlarni avto-aniqlash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "Printerni olib tashlash" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Internetdan qaysi xizmatlarga ulanishga ruxsat berasiz?" #: ../../standalone/printerdrake:1 #, c-format msgid "Connection Type" msgstr "Ulanishning turi" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "Boshqasi" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "Andoza" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter a package name." msgstr "Iltimos foydalanuvchining ismini kiriting" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "chkrootkit tekshiruvlarini bajarish" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "type1inst'ni yaratish" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "Abiword" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "tasvir faylini tanlash" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X serveri" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "AQSh (halqaro)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "O'rnatilmagan" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "Bir vaqtda ikkala Alt tugmalari" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "LAN orqali ulanish" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Fayl/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "Italiyancha" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "Asosiy" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/92errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Gonduras" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "Kartaning IO'si" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "belgilansa, egasi va gurh o'zgartirilmaydi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Tarmoq FTP orqali.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "Uskunaning yoki faylning nomini kiritishingiz shart!" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/Chi_qish" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Grafik xotiraning hajmi: %s Kb\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "Iltimos tiklash uchun ma'lumotni tanlang..." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Agar rejangizda aboot dasturini ishlatish bo'lsa, diskning boshida bo'sh joy " "(2048 sektor etadi) qoldirish esingizdan chiqmasin." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "Andoza sinov beti" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Yaratish" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "Nima" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Quyidagi paketlarni saralashda xato ro'y berdi:" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "Bolgarcha (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "Serverni o'chirish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "Fayl sistemaning kodlash kaliti" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "Gujarati" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "Mavzuni saqlash" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Braziliya" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "Avto-o'rnatish" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Tarmoqni moslash yordamchisi" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "Saqlash uchun direktoriyani kiriting:" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "Bosib chiqarish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Sizning kompyuteringizga to'g'ridan-to'g'ri ulangan printer topilmadi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Diskda yangi qism yaratish" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "Drayver:" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "noma'lum" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Fdisk dasturidan foydalanish" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "G'ILDIRAKNI AYLANTIRING!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "yuborilgan: " #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Avtomatik IP" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Moldova" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "Uzoqdagi printerni moslash" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL \"'ftp:\" yoki \"http:\" bilan boshlanishi shart" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "Oriya" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "Yangi qoidani oxiriga qo'shish" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "LiLo va Bootsplash mavzularini o'rnatish muvaffaqiyatli tugadi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Endi %s moduliga parametrlarni kiritishingiz mumkin.\n" "Parametrlar \"nomi=qiymati nomi2=qiymati2\" ko'rinishda.\n" "Masalan, \"io=0x300 irq=7\"" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Diskning qismlar jadvalini saqlamasdan chiqaymi?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "Qattiq diskga" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "Paketlar o'rnatilmoqda..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Gollandcha" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Angola" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "Quyidagi paketlarni o'rnatish kerak:\n" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Boshqa" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Latviya" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Fylni boshqa loopback ishlatayapti, boshqasini tanlang" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "Faqat o'qishga" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "Ma'lum bo'lgan drayver yo'q" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 Mb" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Agar bu siz moslamoqchi bo'lgan printer bo'lmasa, uskunaning/faylning nomini " "kiriting." #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Lokal tarmoqni moslash" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "suid/sgid fayllarning checksum'ini tekshirish" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Kompyuteringizda tovush sistemasini ishga tushirish" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "Bajarish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "Printer ma'lumot bazasi tayyorlanmoqda..." #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "Ma'lumot" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "Tarmoq kartasi yo'q" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 tugmali" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Sizga qanaqa fayl sistemasi kerak?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Malta" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Batafsil ma'lumot" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "Bu disketning formati FAT emas" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Tarmoq moslanmoqda" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "Grafik karta" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Diskning Windows qismining hajmini o'zgartirish" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Kamerun" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "Provayderning DNS 1 (tanlasa bo'ladi)" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Endi siz %s diskni bo'lishingiz mumkin.\n" "Tugatgach \"w\" bilan saqlash esingizdan chiqmasin." #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "Saami (Shvedcha/Fincha)" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "Yopish" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Kalendar" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Uzoqdagi LPD printeridan foydalanish uchun printer o'rnatilgan kompyuterning " "nomini va printerning nomini ko'rsatishingiz kerak." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Islandiya" #: ../../standalone/drakconnect:1 #, c-format msgid "Network & Internet Configuration" msgstr "Tarmoq va Internetni moslash" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "consolehelper dasturi etishmayapti" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "to'xtatilgan" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Ro'yxatni yoyish" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "Ekspert usuli" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Printerning parametrlari" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "Lokal tarmoqning manzili" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the user umask." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "Samba serveri" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "Avstraliya kabel TV Optus" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " msgstr "" " <Tab>/<Alt-Tab> elementdan-elementga | <Space> tanlash | <F12> keyingi " "oyna " #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Zimbabve" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "Qachon" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "Sizga alcatel mikro-kodi kerkak.\n" "Uni\n" "%s\n" "dan yozib oling va mgmt.o faylini /usr/share/speedtouch direktoriyasiga " "ko'chiring." #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "Soat" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "Ikkinchi DNS serveri (tanlab bo'ladi)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Finlyandiya" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Bu paketni tanlashni bekor qilolmaysiz. U yangilanishi shart." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "Disketdan yuklanmoqda" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Sloveniya" #: ../../standalone/mousedrake:1 #, c-format msgid "Mouse test" msgstr "Sichqonchani sinash" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Foydalanuvchini kiriting\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "Bajarish ko'rsatgichining rangini tanlash" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Sistemani yuklash menyusining bandlari.\n" "Qo'shimcha bandlar yaratishingiz yoki mavjud bo'lgan bandlarni " "o'zgartirishingiz mumkin." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "SANE paketlari o'rnatilmoqda..." #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Turini o'zgartirish" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr ", USB printer \\#%s" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "SILO dasturini o'rnatish" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Tabriklaymiz! O'rnatish tugadi.\n" "Yuklovchi manbani olib tashlang va kompyuterni\n" "o'chirib-yoqish uchun ENTER tugmasini bosing.\n" "\n" "\n" "Mandrake Linux'ninig bu versiyasi uchun yangilanishlar haqida\n" "ma'lumot quyidagi Errata veb-sahifasida mavjud:\n" "\n" "\n" "%s\n" "\n" "\n" "Sistemangizni moslash haqida ma'lumot Mandrake Linux\n" "foydalanuvchilari uchun rasmiy qo'llanmasida mavjud." #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "paranoid" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "Boshqadan moslash" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Shell timeout" msgstr "Konsol uchun taymaut" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Xinetd xizmati" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "tarmoq vositalardan foydalanishni ruxsat etish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" "Va, albatta, audio fayllarni tinglash uchun, videoni tomosha qilish, va rasm " "va suratlaringizni boshqarish uchun eng yangi dasturlar bilan multimedianing " "bor imkoniyatlaridan foydalaning." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Avto-aniqlangan printerlarning ro'yxati. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Tanlangan fayllarni\n" "tiklash" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "/etc/fstab fayliga kiritilgan o'zgarishlarni saqlashni istaysizmi?" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM disklar %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "%s paketi kerak. Uni o'rnataymi?" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "Sistema yuklanayotganda" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "Vatikan" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Iltimos avvalo ma'lumotlaringizdan zaxira nusxa oling" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Sizda bittadan ko'p qattiq disk mavjud. Ularni qaysiga Linux'ni o'rnatasiz?" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Eritriya" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Firmware needed" msgstr "agar kerak bo'lsa" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "Ro'yxatni olib tashlash" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "Inuktitut" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Marokash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "Sizning printeringizning modeli?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "Yangi printerni qo'shish" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Nepal" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- O'chirish" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "protsessor # " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Paketni (%s) o'rnatishda muammolar paydo bo'ldi" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "Yangilash" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Diskning qismlar jadvalini qaytadan yuklash" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ha, avtomatik ravishda sistemaga kirishni istayman" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Selected" msgstr "Tanlanganni tiklash" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "O'rnatilgan ro'yxatda shriftlarni qidirish" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "Sistemani yuklanishi" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "\"Menyu\" tugmasi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "Xavfsizlik boshqaruvchisi:" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "Shriftlardan nusxa ko'chirish" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Avtomatik" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Moslamalarni sinab ko'rishni istaysizmi?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" "Star Office/OpenOffice.org/GIMP dasturlaridan \"%s\" printerni olib tashlash " "muvaffaqiyatli tugadi." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Paketlar tanlovini saqlash" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "/_Amallar" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "Oxirgi bandni olib tashlash" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "pptp'dan foydalanish" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" "Sistema yuklanayotganda ishga tushishi kerak bo'lgan xizmatlarni tanlang" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "Printerdan foydalanishni o'rganish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "Tarmoqni moslash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Paketlarni olish uchun oynani tanlang" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: " msgstr "Hajmi: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "Buni qaysi sektorga ko'chirmoqchisiz?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Bagama Orollari" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Bu tugmani bosishni istaysizmi?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "Qidirish" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (displey drayverini o'rnatish)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zeroconf kompyuterning nomida \".\" belgisi bo'lmashi kerkak" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "Noma'lum/Boshqalar" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "TV karta topilmadi!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Parametrlar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Printer (\"%s\") andoza deb belgilandi." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "protsessorning avlodi (m-n: PentiumIII uchun 8,...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "Avto-aniqlandi" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Siz o'rnatmoqchi bo'lgan printerning yoki uskunaning/faylning nomini " "kiriting." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Qabul qilmash" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "LOKAL" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "%s fayli yaratilmoqda va format qilinmoqda" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Qo'shish uchun mavjud bo'lgan LVM'ni tanlang" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "XFS-ni boshqadan ishga tushirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Printer \"%s\" allaqachon mavjud.\n" "Uning moslamalarini almashtirishni rostdan istaysizmi?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "Quyidagi kompyuterlardagi skannerlardan foydalanish:" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "Hech qaysini tanlamash" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "Diskning qismi yo'q." #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Management \n" msgstr "Printer boshqaruvi\n" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "Kodlash kaliti (yana)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "True Type shriftlar o'rnatildi" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "Aniqlash ketayapti" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "modem" msgstr "modem" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "%s'ga marhamat" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "Bootsplash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Quyidagi printer\n" "\n" "%s%s\n" "sistemangizga to'g'ridan-to'g'ri ulangan." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s <file>\". " msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Kuba" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "Oktyabr" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Beliz" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "Yangi printerlar qidirilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr " (ko'p seansli)" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr " Kundalik xavfsizlik tekshiruvini yoqish/o'chirish." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "\t-Kompakt-disk.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX diskni bo'lish yordamchisi quyidagi echimlarni topdi:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Vengrcha" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Provayderingizni tanlang.\n" "Agar ro'yxatda yo'q bo'lsa, \"Ro'yxatda yo'q\"ni tanlang." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Use my Windows partition" msgstr "Diskning Windows qismini ishlatish" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 Mb" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "LDAP serveri" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "Davlatingizni tanlang" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Sistemaning fayllari:\n" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "Qaerda" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "mos kelmaydigan" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Bu erda %s tovush kartangiz uchun boshqa drayverni (OSS yoki ALSA) " "tanlashingiz mumkin." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kartalar moslanmoqda..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "kdesu dasturi etishmayapti" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s foydalanuvchini talab qiladi...\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "Kodlash kaliti" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Bu moslama o'rnatishdan kegin ishga tushadi.\n" "O'rnatish vaqtida turli tugmalar tartibini tanlash uchun\n" "o'ng \"Ctrl\" turmasini ishlating." #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Krismas Oroli" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" "Operatsion sistema yuklagichini o'rnatish muvaffaqayatsiz tugadi. Quyidagi " "xato ro'y berdi:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI kanal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "Bu printerni andoza deb belgilash" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Bu to'g'rimi?" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "diskning %s qismi" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Paranoid" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "<-- Foydalanuvchini o'chirish" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "Hech qanday printer topilmadi!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "Uskunani ishlab chiqargan firmaning nomi" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Butun diskni o'chirish" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Andoza)" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "Avtomatik ravishda boshqadan moslash" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "Qabul qilish tezligi:" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks va Kaikos Orollari" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "Yo'q" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "<- Oldingisi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Transfer Now" msgstr "Uzatish" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Set root password and network authentication methods" msgstr "Foydalanuvchilarni tasdiqlash uchun maxfiy so'zdan foydalanish" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing configuration" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Mavzular" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Parametrlar: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Operatsion sistema yuklagichi sifatida siz %s'ni ishlatayapsiz.\n" "O'rnatish yordamchisini ishga tushirish uchun \"Moslash\"ni bosing." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "OKI vin-printerni moslash" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Avliyo Elena Oroli" #: ../../printer/main.pm:1 #, c-format msgid "Parallel port #%s" msgstr "Parallel porti #%s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "Xavfsizlik darajasi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Ba'zi o'rnatish bosqichlari bajarilmadi.\n" "\n" "Rostdan chiqishni istaysizmi?" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Sudan" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Polyakcha (qwertz)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "Suriya" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Sizning printeringiz HP yoki Sony (OfficeJet, PSC, LaserJet " "1100/1200/1220/3200/3300 skanner bilan, DeskJet 450, Sony IJP-V100), HP " "PhotoSmart yoki HP LaserJet 2200 ko'p amalli uskunami?" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "%s, operasion sistemani tanlash, dasturiga marhamat!\n" "\n" "Yuqoridagi ro'yxatdan operasion sistemani tanlang\n" "yoki andoza uchun %d soniya kutib turing.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Portugalcha" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Loopback faylining nomi:" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS serverning manzili quyidagi formatda bo'lishi shart: 1.2.3.4" #: ../../keyboard.pm:1 #, c-format msgid "Left Control key" msgstr "Chap Ctrl tugmasi" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "Serbiya" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "Yangi Zelandiya" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Bu direktoriya tub fayl sistemasida bo'lishi kerak" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "Tarmoq orqali" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "CapsLock tugmasi" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "OS yuklagichini o'rnatish" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Grafik kartangizni xotirasining hajmini tanlang" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "LVM nomi?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s interfeyslar topildi" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "O'rnatishdan kegin amallar" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Kartaning IRQ'si" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Yuklash diskini yaratish uchun disket uskunasini tanlang" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO (matn menyu)" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "Hammasi (fayervol yo'q)" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr ", USB portidagi ko'p amalli uskuna" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "Bajarish" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Mavjud bo'lgan paketlarning ro'yxatini olish uchun oyna bilan aloqa " "o'rnatilmoqda..." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Litvacha AZERTY (eski)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Brazilcha (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "Xostning/tarmoqning IP raqami:" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "Bajarish ko'rsatgichining y koordinatasi\n" "uning yuuqori-chap burchagi" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "Sistemani o'rnatish" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Sent-Vinsent va Grenadina" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Konsol orqali kompyuterni o'chirib-yoqishga ruxsat etish/etmash." #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Fayl/_Ochish" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "auto_install.cfg fayli joylashgan joy" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Vengriya" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Yangi Zelandiya" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "Rangni moslash" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Sistemada allaqachon ba'zi cheklashlar mavjud va har kuni avtomatik " "tekshiruvlar bajariladi." #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "Iltimos tiklash uchun sanani tanlang" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Niderlandiya Antil Orollari" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Ext2 fayl sistemasidan ext3 fayl sistemasiga o'tilmoqda" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "va %d noma'lum printer" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" "ISDN PCI kartasi topilmadi. Iltimos keyingi oynada birortasini tanlang." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "Gb" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Iltimos foydalanuvchining ismini kiriting" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "Yanvar" #: ../../security/l10n.pm:1 #, c-format msgid "Password history length" msgstr "Maxfiy so'z tarixining uzulnigi" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "Vin-modem orqali ulanish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "%s %s'da" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid remote root login." msgstr "Root uzoqdan kirishiga ruxsat etish/etmash." #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Which is your timezone?" msgstr "Vaqt zonangizni tanlang?" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use .backupignore files" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Gvineya" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "Sistema Internetga ulangan." #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Janubiy Jorjiya va Janubiy Sendvich Orollari" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "Monitor\n" "\n" " Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n" "avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n" "bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin." #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Mozambik" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Nishoncha" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 rang (8 bit)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "O'qish-yozish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Hajmi: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "Kompyuterning nomi:" #: ../../standalone/drakperm:1 #, c-format msgid "Add a rule" msgstr "Qoidani qo'shish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "Linux'ning kelajagini yarating!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "Lokal printer" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "%s uskunani qaerga ulamoqchisiz?" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "ADSL orqali ulanish" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Xato!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "kabel orqali ulanish aniqlandi" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/_Xato haqida xabar qilish" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Dominika" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Hajmini o'zgartirish" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Iltimos to'g'ri portni tanlang. Masalan, Windows'dagi \"COM1\"\n" "portining nomi GNU/Linux'da \"ttyS0\"." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Quyidagi paketlar olib tashlaniladi." #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "Internetga ulanish" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Diskda bor qismlardan foydalanish" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Kanadcha (Kvebek)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Sichqonchaning uskunasi: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "To'g'ri shriftlarni boshqadan tanlash" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "Korporativ MandrakeExpert" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "Yozishdan himoyalash" #: ../../standalone/drakfont:1 #, c-format msgid "You've not selected any font" msgstr "Siz hech qanday shriftni tanlamadingiz" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Til" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "Printerning modelini tanlash" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismining turini o'zgartirishdan kegin undagi hamma ma'lumot " "yo'qoladi" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d soniya" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Bo'sh diketni %s uskunasiga qo'ying" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "Haqiqiy URI kiritilishi kerak!" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "\"%s\" inerfeysi topildi. Undan foydalanishni istaysizmi?" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Interfeysni va DHCP serverini boshqadan moslash" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "Tovushni moslash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "Surat sinov beti" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Diskni boshqacha bo'lish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "Printerning nomini va izohni kiriting" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Quyidagi printerlar\n" "\n" "%s%s\n" "sistemangizga to'g'ridan-to'g'ri ulangan." #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "turi: %s" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Slovakcha (qwerty)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "Tovush kartasi topilmadi!" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Sichqonchaning porti" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "O'zgarishlarni qo'llash uchun oynalar boshqaruvchisi boshqadan ishga " "tushirilishi kerak.\n" "(service dm restart - konsolda)" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "FTP serveri" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Uganda" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "%s shriftni aylantirish" #: ../../standalone/harddrake2:1 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Komoros" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "May" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Yaboot usuli" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "3 tugmali andoza sichqoncha" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "AQSH (kabel)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "LiLo'ni boshqadan ishga tushirib bo'lmadi.\n" "LiLo mavzusini o'rnatishni tugatish uchun konsolda root sifatida \"lilo\" " "buyrug'ini bajaring." #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "Tiklash uchun boshqa ma'lumot tashuvchini tanlang" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "Dasturlar boshqaruvchisi" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "Boshqadan yuborish" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "Kompakt-diskni joyiga qo'ying - davom eting." #: ../../common.pm:1 #, c-format msgid "KB" msgstr "Kb" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "Tarmoq va Internet" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Litvacha \"fonetik\" (qwerty)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" "Plug'n Play aniqlash muvaffaqiyatsiz tugadi. Iltimos to'g'ri keladigan " "monitorni tanlang" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "Uzoqdagi xostning nomi aniqlanmagan!" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "/usr bilan" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "Tarmoq" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Microsoft Windows boshqarayotgan kompyuterlarga ulangan avto-aniqlangan " "printerlar" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Bu maxfiy so'z juda oddiy" #: ../../security/l10n.pm:1 #, c-format msgid "Chkconfig obey msec rules" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Slovakcha (qwertz)" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No devices found" msgstr "Hech qanday uskuna topilmadi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Haqiqiy minimal o'rnatish (xususan urpmi'siz)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Tasdiqlash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Bu printerni Star Office/OpenOffice.org/GIMP dasturlariga qo'shish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "Qo'shimcha CUPS serverlar: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Avtomatik ravishda aniqlangan printerlar ro'yxatidan bittasini tanlang yoki " "printerning xost nomini yoki IP raqamini va istasangiz port raqamini (andoza " "- 9100) kiriting." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "Diskning %s qismini qaerga ulamoqchisiz?" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Jazoir" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "Tarmoq orqali tiklash" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Initrd'ning hajmi" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Set as default" msgstr "Andoza deb belgilash" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 Mb" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on this machine" msgstr "Shu kompyuterda moslangan" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "Bir vaqtda ikkala Ctrl tugmalari" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr " --help - shu yordamni ko'rsatish\n" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "Andoza printer o'rnatilmoqda..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "Interfeys %s (%s moduli ishlatilmoqda)" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "Oldindan ko'rib chiqish yaratilmoqda..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Chastota \"M\" yoki \"G\" bilan tugashi kerak (masalan, 2.46 GHz uchun\n" "\"2.46G\"), yoki etarlicha \"0\" (nol) qo'shing." #: ../../standalone/draksec:1 #, c-format msgid "ignore" msgstr "etibor bermash" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", \\#%s parallel portidagi ko'p amalli uskuna" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "Ketma-ket" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Gruzincha (lotin)" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" "Mandrake Linux'ning strategik hamkorlari yordamida eng yaxshi narsalarni " "egasi bo'ling." #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Keniya" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Avvalo \"Unmount\"ni ishlating" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "mtools paketlari o'rnatilmoqda..." #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "Diskning tub qismini kiritishingiz shart" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "yaratishning birinchi bosqichi" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "Bir vaqtda ikkala Shift tugmalari" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id <id_label> - load the html help page which refers to id_label\n" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "Skannerning modelini tanlang" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR'ning yangi avlodi" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup moslamasi" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "...sifatida saqlash" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "Shimoliy Koreya" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Bu interfeys hali moslangani yo'q.\n" "Moshlash yordamchisini asosiy oynadan ishga tushiring." #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "Sistemani moslash" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "Sistemaga avtomatik ravishda kirish" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "Printer moslanmoqda..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "Mb" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Virginiya Orollari (Angliya)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Bermuda Orollari" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "agar ishonchingiz komil bo'lsa, bu erni bosing." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "Olib tashlash" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Lesoto" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "utopia 25" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "Vazifaning natijasini buyrug'ga ulash (pipe)" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Kot d'Ivuar" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Ha" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Qaysi protokoldan foydalanmoqchisiz?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Estoniya" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "Kanal" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Qo'shish" #: ../../standalone/drakgw:1 #, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr " Xatni yuborishda xato ro'y berdi. \n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "Siz moslamoqchi bo'lgan ulanishni tanlang" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "Iltimos kutib turing, xavfsizlik darajasi o'rnatilmoqda" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Tarmoq uskunasi (%s) moslanmoqda" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "ishlayapti" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Iltimos qaysi tarmoq interfeysi DHCP serveri uchun ishlatilishini tanlang." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Yangilash uchun paketlar qidirilmoqda..." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Ulash nuqtasi: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid direct root login." msgstr "Root to'g'ridan-to'g'ri kirishiga ruxsat etish/etmash." #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "X bilan" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "Hech qanday brauzer mavjud emas! Iltimos birortasini o'rnating" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "O'zgarishlarni saqlaymi?\n" "Joriy moslama quyidagicha:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" "Hajmi 32 Mb'dan kichik bo'lgan qismlar uchun ReiserFS fayl sistemasini " "ishlatib bo'lmaydi" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "Mavjud bo'lgan printerlar" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "NO" msgstr "MA'LUMOT" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Bo'sh" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "Matnning eni" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "%s uskunani qaerga ulamoqchisiz?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Endi biz %s ulanishni moslash arafasidamiz.\n" "\n" "\n" "Davom etish uchun \"%s\" tugmasini bosing." #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "Interfeys \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "Asosiy qo'llanmalar bilan (tavsiya qilinadi!)" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 tugmali" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Sistemangizga %d noma'lum printer to'g'ridan-to'g'ri ulangan." #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Sinash" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "Koreya" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Siz nimani tanlaysiz? (andoza: \"%s\"%s) " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "protsessor ishlab chiqaruvchining rasmiy nomi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "Terminal serverisiz foydasiz" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "Ishlab chiqaruvchi" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "Interfeys %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Sichqonchani moslash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Ulash nuqtalarini tanlang" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "Ok" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "Yugoslavcha (lotin)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "O'rnatilmoqda" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "Userdrake dasturini ishga tushirish" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "Bu o'rnatishmi yoki yangilashmi?" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "ISDN karta" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Qattiq disk.\n" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "Uzoqdagi CUPS serveridagi printer" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "Star Office/OpenOffice.org/GIMP dasturlaridan \"%s\" printerni olib tashlash " "muvaffaqiyatsiz tugadi." #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "bu erga, agar \"yo'q\" bo'lsa." #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "DHCP xostning nomi" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Iltimos sichqoncha ulangan ketma-ket portini tanlang." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "To'g'ri ishladimi?" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "Fayl sistemalarni faqat o'qishga deb ulash." #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Past" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "Tekshiruv natijasini elektron xat orqali yuborish" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Grenada" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "DHCP'ning pastgi chegarasi" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Xavfli" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s sektor" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Yo'q" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Gvadelupa" #: ../../keyboard.pm:1 #, c-format msgid "Kannada" msgstr "Kannada" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "hech qanaqa shriftni topolmadim.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "%s bosqichga o'tilmoqda\n" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Niger" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "\"%s\" olib tashlanmoqda..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Printer yo'q" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "NetWare printerning parametrlari" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s BootSplash'ni (%s) ko'rib chiqish" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "Fevral" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Umumiy" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* mavjud" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Foydalanuvchini qo'shish" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Tarmoqning moslamasi (%d adapter)" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "Aprel" #: ../../standalone/drakconnect:1 #, c-format msgid "Deactivate now" msgstr "O'chirish" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "Shart bo'lgan paket (%s) etishmayapti" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Filippin" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "Ok" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Bosib chiqarish navbatining nomi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "aboot dasturidan foydalanishni istaysizmi?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Beloruscha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ bilan faqat lokal printerlarni, uzoqdagi LPD printerlarni va Socket/TCP " "printerlarni ishlatib bo'ladi.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "Fayllarni diskning yangi qismiga ko'chirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan printer(lar)ingizni o'rnatishda sizga " "yordam beradi.\n" "\n" "Shu kompyuterga ulangan printer(lar)ingizni avtomatik ravishda aniqlash " "uchun uni/ularni yoqilgan holatga keltiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingisi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Pitkern" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "Katalogdan tiklash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "Disk qismini (%s) direktoriyaga (%s) ulash muvaffaqiyatsiz tugadi" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "Lilo oynasi" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO (grafik menyu)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Chamalanmoqda" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Bu paketni tanlashni bekor qilolmaysiz. U allaqachon o'rnatilgan." #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", \"%s\" printer \"%s\" SMB/Windows serverida" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Bunga qaramasdan davom etaymi?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" "Mavjud bo'lgan paketlarni qidirish va rpm ma'lumot bazasini boshqadan " "yaratish bajarilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackup hisoboti \n" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "Yozish mumkin bo'lgan ma'lumot tashuvchiga o'xshamaydi!" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Parametrlarni aniqlash" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "Foydalanuvchilarning eski ro'yxati\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Serverning nomi yoki serverning IP raqami kiritilishi shart!" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "%s ulash nuqtasi uchun kodlangan fayl sistemasini ishlatib bo'lmaydi" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Norfolk Oroli" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "Mavzuni o'rnatish muvaffaqiyatsiz yakunlandi!" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "Bajarish uchun hech narsa yo'q" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Loopback uchun ishlatish" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "Mandrake uchun xato haqida xabar qiluvchi vosita" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "Filterni qo'llash" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "pppoe'dan foydalanish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "Fayllar diskning yangi qismiga ko'chirilmoqda" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Qo'shimcha" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "Uzatish" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (Shvedcha)" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Afg'oniston" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "Qo'shimcha parametrlar" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Burundi" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "Klientni qo'shish -->" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Diqqat bilan o'qing!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Iltimos\n" "davlatingizni va TV formatingizni kiriting" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Port" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "Yo'q (faqat ekspertlar uchun)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "GID'ni o'rnatish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "Kodlash kalitlari mos kelmaydi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "USB printer" msgstr "USB printer" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "O'ng \"Windows\" tugmasi" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" "agar \"ha\" bo'lsa, /etc/shadow faylidagi bo'sh maxfiy so'zlarni tekshirish" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "Davom etishdan oldin litsenziyaning shartlarini e'tibor bilan o'qib\n" "chiqing. Litsenziya butun Mandrake Linux'ga tegishli. Agar uning barcha\n" "shartlariga rozi bo'lsangiz, \"%s\"ni tanlang. Agar rozi bo'lmasangiz,\n" "kompyuteringizni o'chiring." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Joriy printer uchun mavjud bo'lgan parametrlarning ro'yxati:\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "Tanlangan kompyuterni olib tashlash" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Tarmoqni moslash" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "Belgilangan qoidani bir daraja pastga tushirish" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "Tb" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "Ro'yxatni yangilash" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "O'chirish" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Men kompyuteringizni shunday o'rnatishim mumkinki, sistema yuklanayotganda " "grafik interfeys (XFree) ishga tushiriladi.\n" "O'chirib-yoqgandan kegin XFree ishga tushirilishini istaysizmi?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Diskni yaratish" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Holati:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "HTTP proksi" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "SSH serveri" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Tarmoq rsync orqali.\n" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "Oyropa protokoli" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", \"%s\" printer \"%s\" serverda" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/drakbug:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "Xato" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "\"su\" buyrug'idan foydalanishga ruxsat etish" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Avstraliya" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "iltimos ttmkfdir tugaguncha kutib turing..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Faqat \"%s\"%s kartasini moslash" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "Daraja" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "Bosib chiqarish sistemasini o'zgartirish" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Xizmatlarni moslash" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "ulash muvaffaqiyatsiz tugadi: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Tasvir" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "Star Office/OpenOffice.org/GIMP dasturlariga \"%s\" printerni qo'shish " "muvaffaqiyatsiz tugadi." #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "Uzoqdan turib boshqarish" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "Hammasini tanlash" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Umumiy Yuniks Bosib chiqarish Sistemasi" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "Vebmin xizmati" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "uskuna" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save to:" msgstr "Saqlash uchun direktoriyani kiriting:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "Gretsiya" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Hammasi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Qaysi bosib chiqarish sistemasini (spuler) ishlatmoqchisiz?" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "Iyul" #: ../../printer/main.pm:1 #, c-format msgid "Prints into %s" msgstr "%s yordamida bosib chiqarilmoqda" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "Xato ro'y berdi" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Bu paket yangilanishi shart.\n" "Uni tanlashni bekor qilishga ishonchingiz komilmi?" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Tamilcha (yozish moshinasi)" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "Foydalanuvchilarni tasdiqlash uchun maxfiy so'zdan foydalanish." #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Sistemaning foydalanuvchilar ro'yxatini displey boshqaruvchilar (KDM va GDM) " "ko'rsatishga ruxsat etish/etmas." #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Printerning ishlab chiqaruvchisi, modeli, drayveri" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Direktoriyada (%s) allaqachon ma'lumot bor\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "NetWare serveridagi printer" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "RAM'ning hajmini kiriting (Mb)" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "Juma" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet complete." msgstr "Internetdan uzulish bajarildi." #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Foydalanuvchining haqiqiy ismi-sharifi" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "Tayyor" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "Juda yuqori" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Format qilish uchun diskning qismlarini tanlang" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "%s'ni %s'da topib bo'lmadi." #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Yaponcha 106 tugma" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "Bu bir necha minut davom etadi." #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Burkina-Fasso" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "Iyun" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "Uzoq kompyuterlardagi skannerlardan foydalanish" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "Belgilangan qoidani o'chirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "Disketni %s'ga qo'ying" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Maldiv Orollari" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "ixcham" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 minut" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: fat" msgstr "turi: fat" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr ", ko'p amalli uskuna" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "Laos" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Hajmini o'zgartirish uchu diskda FAT qism mavjud emas (yoki etarli joy " "mavjud emas)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "Yuqoriga" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "Fayervol" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA kontrollerlar" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Bosib chiqarish serveri" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "Boshqacha moslash" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Sent-Per va Mikelon" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "Sentyabr" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "Bootsplash mavzusi saqlanmoqda..." #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Portugaliya" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Sizda yana boshqasi bormi?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", %s yordamida bosib chiqarilmoqda" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Odiy usuliga o'tish" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Andoza" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "Tsilindr %d dan %d gacha\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Buni qaysi diskga ko'chirmoqchisiz?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Saami (norwegian)" msgstr "Saami (Norvegcha)" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "Interfeys %s (%s tarmog'ida)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "MA'LUMOT" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "Uollis va Futuna Orollari" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Avvalo /etc/dhcpd.conf faylini yaratish kerak!" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "FPU mavjudmi" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Sistemangizda mvjud bo'lgan skanner topilmadi.\n" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Uzr, bu xizmat haqida\n" "qo'shimcha ma'lumot yo'q." #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Marshall Orollari" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Bu to'g'rimi?" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Root maxfiy so'zi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "DVDRAM device" msgstr "DVDRAM uskuna" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "<span foreground=\"royalblue3\">Version:</span> %s\n" "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <tvignaud" "\\@mandrakesoft.com>\n" "\n" msgstr "" "HardDrake - Mandrake uchun asbob-uskunalarni moslovchi vosita.\n" "<span foreground=\"royalblue3\">Versiya:</span> %s\n" "<span foreground=\"royalblue3\">Muallif:</span> Thierry Vignaud <tvignaud" "\\@mandrakesoft.com>\n" "\n" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Sizda diskning svop qismi yo'q.\n" "\n" "Bunga qaramasdan davom etishni istaysizmi?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "Versiyasi: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "Serverning IP raqami aniqlanmagan!" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Surinam" #: ../../network/adsl.pm:1 #, c-format msgid "Use a floppy" msgstr "Disketdan foydalanish" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "ACPI'ni yoqish" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "Oddiy foydalanuvchilarga yozish ruxsatini berish" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "Grafik muhit" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "Hech nima qilmash" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "Klientni o'chirish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Fayl sistemaning turi: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "Tarmoq ishga tushirilmoqda..." #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "Vetnam" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "/_Maydonlar ta'rifi" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "Mandrake Linux yordamida xavfsizlikingizni yaxshilang" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Yordam" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Shaxsiy telefon raqamingiz" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Sinov bet(lar) printerga yuborildi.\n" "Printer ishini boshlaguncha biroz vaqt o'tishi mumkin.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "Foydalanuvchining nomi kerak" #: ../../standalone/drakfloppy:1 #, c-format msgid "Device" msgstr "Uskuna" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) printerning paramertrlari" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "URI: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrd uchun boshqa argumentlar" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" "Mozilla va Konqueror bilan Vebga sayohat qiling, Evolution va Kmail " "yordamida elektron xatlaringizni o'qing, OpenOffice.org bilan " "hujjatlaringizni yarating." #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "Sinov betini bosib chiqarish" #: ../../standalone/drakconnect:1 #, c-format msgid "Activate now" msgstr "Yoqish" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 Mb yoki ko'proq" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Iltimos siz bosib chiqarmoqchi bo'lgan sinov betini tanlang.\n" "Izoh: surat sinov betini bosib chiqarish ancha uzoq vaqt davom etishi mumkin " "va juda kichik hotirali lazer printerlarda umuman chiqmashi mumkin. Ko'p " "hollarda, andoza sinov betini bosib chiqarish kifoya." #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "Iltimos %s ulangan uskunani tanlang" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Format qilinmagan\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "Davriy tekshiruvlar" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "PXE serverini moslash" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Bu Internet tarmog'ida klient sifatida ishlatiladigan kompyuter uchun " "tavsiya etilgan xavfsizlikning andoza darajasi." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Ikkinchi disket uskunasi" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Fayl/Chi_qish" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Yangi hajmni tanlang" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "Ma'lumot tashuvchining sinfi" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" "O'zgarishlar to'liq qo'llanilishi uchun sistemaga boshqadan kirishingiz kerak" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "%s Scannerdrake dasturining bu versiyasiga ma'lum emas." #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Farer Orollari" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "XFS-ni boshqadan ishga tushirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "Xostni/tarmoqni qo'shish" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "Modelning nomi" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Albaniya" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Hind Okeanning Britaniya Erlari" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "Oddiy usul" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Uskunada CDR/DVDR yo'q!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "Printerga ulanishning turi" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "Sistemada tarmoq adapteri mavjud emas!" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "Tarmoq %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "Malayalam" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "Parametr %s chegaradan tashqarida!" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "%s-ni ulash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "CUPS boshqadan ishga tushirilmoqda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Bir hil ulash nuqtalari %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "agar \"ha\" bo'lsa, chkrootkit tekshiruvini bajarish" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Aloqani moslash" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "Noma'lum|Andoza" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Myanmar" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Chiqish" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Avto-taqsimlash" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr " Xato bloklarni tekshiraymi?" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "Boshqa multimedia uskunalar" #: ../../standalone/harddrake2:1 #, c-format msgid "burner" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (Default is all users)" msgstr " (andoza: hamma foydalanuvchilar)" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "Uzoqdagi kompyuter yo'q" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printerni o'rnatish yordamchisiga marhamat!\n" "\n" "Yordamchi shu kompyuterga ulangan printer(lar)ingizni o'rnatishda sizga " "yordam beradi.\n" "\n" "Agar shu kompyuterga ulangan printer(lar)ingiz bo'lsa, uni/ularni avtomatik " "ravishda aniqlash uchun uni/ularni yoqilgan holatga keltiring.\n" "\n" " Tayyor bo'lganingizdan so'ng \"Keyingisi\"ni yoki printer(lar)ingizni " "o'rnatishni istamasangiz \"Bekor qilish\"ni bosing." #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "Tasdiqlovchi NIS" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Birlashgan Arab Amirliklari" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "Kartaning IO_0'si" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Tailand" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "Kartaning IO_1'si" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "Qidirish:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Qozog'iston" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "Ruterlar:" #: ../../standalone/drakperm:1 #, c-format msgid "Write" msgstr "Yozish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "Mavjud bo'lgan uzoqdagi hamma CUPS printerlarni ko'rsatish" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux'ni o'rnatish %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "Noma'lum drayver" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Taycha" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Buve Oroli" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" "Agar hech qanday port ko'rsatilmasa, andoza sifatida 631 qabul qilinadi." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Kompakt-diskni almashtiring!\n" "\n" "Iltimos \"%s\" belgili kompakt-diskni qo'ying va \"Ok\" tugmasini bosing.\n" "Agar u sizda bo'lmasa, bu kompakt-diskdan o'rnatishni bekor qilish uchun " "\"Bekor qilish\" tugmasini bosing." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Polyakcha" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Tarmoq webdav orqali.\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on a parallel port" msgstr ", parallel portidagi ko'p amalli uskuna" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Sistemangizda tarmoq adapteri aniqlanmadi. Iltimos asbob-uskunani moslovchi " "vositani ishga tushiring." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Tarmoq maskasi" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "Qattiq disklar topilmadi" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 tugmali" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Belgi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Disketga saqlash" #: ../../security/l10n.pm:1 #, c-format msgid "Check open ports" msgstr "Ochiq portlarni tekshirish" #: ../../standalone/printerdrake:1 #, c-format msgid "Edit selected printer" msgstr "Belgilangan printerni tuzatish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "Printerni avto-aniqlash" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Quyidagilarning qayi biri sizning ISDN kartangiz?" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "Msec" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> E'tibor bering, belgi o'zgardi:\n" "%s" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Siz nimani tanlaysiz? (0/1, andoza: \"%s\")" #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Frantsuzcha" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Chexcha (qwerty)" #: ../../security/l10n.pm:1 #, c-format msgid "Allow X Window connections" msgstr "X Windows ulanishlarga ruxsat etish" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "Asbob-uskunalarni aniqlash ketayapti" #: ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "Tarmoq uskunasi" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Hisobot" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Parallel portlar: /dev/lp0, /dev/lp1, ..., LPT1:, LPT2:, ... ga teng, 1-" "chi USB printer: /dev/usb/lp0, 2-chi USB printer: /dev/usb/lp1, ...)." #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "Keyingisi" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Operatsion sistema yuklagichini diskning %s qismiga o'rnatolmaysiz\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Puerto-Riko" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp/zeroconf)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Marhamat.\n" "\n" "Avtomatik ravishda o'rnatishning parametrlari chap tarafdagi bo'limlarda " "mavjud" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "o'rnatishni tugatish uchun \"ImageMagick\" paketi kerak.\n" "\"ImageMagick\" paketini o'rnatish uchun \"Ok\"ni yoki chiqish uchun \"Bekor " "qilish\"ni bosing." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Litvacha \"raqamli qator\" (qwerty)" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Sistemangizni yangilash uchun quyidagi paketlar o'chiriladi: %s\n" "\n" "\n" "Ularni rostdan o'chirmoqchimisiz?\n" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Angvilla" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Antarktika" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Foydalanuvchining fayllari:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Ulash parametrlari" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Yamayka" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Iltimos kutib turing, o'rnatishga tayorlanmoqda..." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Chexcha (qwertz)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "Portning raqami butun son bo'lishi shart!" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "Avvalo tasvir faylini tanlashingiz shart!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "Qattiq diskdan tiklash." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "LVM'ga qo'shish" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "DNS serveri" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad va Tobago" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD va LPRng bilan IPP printerlarni ishlatib bo'lmaydi.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Host name or IP." msgstr "Kompyuterning nomi yoki IP raqami" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "/_Tuzatish" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "oson" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Hammasini tozalash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "Sinov beti yo'q" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Folklend (Malvin) Orollari" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "Adapter %s: %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Boot disk creation" msgstr "Sistemani yuklash diskini yaratish" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "Dushanba" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "Noma'lum model" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, c-format msgid "authentication" msgstr "tasdiqlash" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/_Fayl" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" "Star Office/OpenOffice.org/GIMP dasturlaridan printer olib tashlanmoqda" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Editable" msgstr "o'chirilgan" #: ../../network/ethernet.pm:1 #, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "Qaysi DHCP klientidan foydalanmoqchisiz?\n" "Andoza - DHCP-klienti" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Tamilcha (ISCII)" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Mayot" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Konsoldan kiritilgan buyruqlar tarixining hajmini aniqlash. -1 cheksizga " "teng." #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d KB\n" msgstr "%d Kb\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Avto-o'rnatish diketi yaratilmoqda..." #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "Skannerlar qidirilmoqda..." #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "Rossiya" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "Diskni bo'lish" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "ethernet karta(lar) topildi" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "Katalogni yaratib bo'lmadi!" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Avto-taqsimlash uchun etarlicha joy yo'q" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Root uchun maxfiy so'z" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "Guruh :" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Diskning %s qismining hajmini o'zgartirgandan kegin u erdagi hamma ma'lumot " "yo'qoladi" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "Internetga ulanishni moslash" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "/_Haqida" #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "Bengalcha" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Afzal ko'rish: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "Xizmatlar: %d ishlamoqda %d qayd qilingan" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Yuklash diskini yaratish" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Solomon Orollari" #: ../../standalone/mousedrake:1 #, c-format msgid "Please test your mouse:" msgstr "Iltimos sichqonchani sinab ko'ring:" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Ishchi guruh" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "Kompyuterning nomi yoki IP raqami" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "Xostga yo'l yoki modul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Printerning nomi faqat harf, son va tagidan chizish belgisidan iborat " "bo'lishi kerak" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "Joriy interfeysning moslamasini ko'rsatish" #: ../../standalone/printerdrake:1 #, c-format msgid "Add Printer" msgstr "Printerni qo'shish" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #: ../../help.pm:1 #, c-format msgid "Development" msgstr "Tuzish" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Tayyor" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "Veb serveri" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Chili" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "\tSistemaning fayllarini kiritmash\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(%s allaqachon qo'shilgan)" #: ../../any.pm:1 #, c-format msgid "Bootloader installation in progress" msgstr "Operatsion sistema yuklagichini o'rnatish davom etmoqda" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr ", %s buyrug'i yordamida" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Bir vaqtda Alt va Shift tugmalari" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "Bayroqlar" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "Foydalanuvchilarni qo'shish/o'chirish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "Xostning/tarmoqning IP raqami aniqlanmagan." #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "har hafta" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Moslamalar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Ko'rsatilgan xost/tarmoq no'to'g'ri.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "Mavjud bo'lgan davlatlarning to'liq ro'yxati" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "Boshqa sinov beti (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Agar sizda quyidagi ro'yxatda ko'rsatilgan kompakt-disklar bo'lsa, \"Ok\" " "tugmasini bosing.\n" "Agar ulardan hech qaysi bo'lmasa, \"Bekor qilish\" tugmasini bosing.\n" "Agar ulardan ba'zi biri bo'lmasa, ularni tanlashni bekor qiling va \"Ok\" " "tugmasini bosing." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "Iltimos kutib turing" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Yangi" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "Disketdan yuklash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "Quyidagi printer avtomatik ravishda aniqlandi. " #: ../../printer/main.pm:1 #, c-format msgid "Uses command %s" msgstr "%s buyrug'i yordamida" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Norvegcha" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "Yangi skannerlar qidirilmoqda..." #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "Apachi veb-serveri" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "tiklash uchun yo'lni tanlang (/ o'rniga)" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "Bootsplash tasvirini moslash" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Gruziya" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Xitoy" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" " (Hamma printerlar ulanganligiga va yoqilganligiga ishonch hosil qiling).\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "O'rnatilgan printerlar haqida ma'lumot o'qilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " Darhol o'chirish " #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "server" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Iltimos %s uskunasiga formati FAT bo'lgan disketni qo'ying" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Iltimos kutib turing... Moslamalar qo'llanilmoqda" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "GRUB, operatsion sistemani tanlash, dasturiga marhamat!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "SCSI kontrollerlar" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " LPD serverida \"%s\", printer \"%s\"" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "Displey boshqaruvchisini tanlash" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf kompyuterning nomi" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP raqami quyidagi formatda bo'lishi shart: 1.2.3.4" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS printing system" msgstr "CUPS bosib chiqarish sistemasini moslash" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Ekvador" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "Bandni qo'shish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" "Boshqa kompyuterlar shu kompyuterdagi printerlardan foydalanishi mumkin" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "Kerak bo'lgan \"%s\" tasvir faylini topib bo'lmadi." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Tovush kartasi topilmadi. O'rnatishdan kegin \"harddrake\" dasturini sinab " "ko'ring." #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "Noto'g'ri port kiritilgan: %s\n" "Portning to'g'ri formati \"port/tcp\" yoki \"port/udp\",\n" "bu erda port 1-65535 oralig'idagi raqam." #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Konsol" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "San-Tome va Prinsipi" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Ozarbayjoncha (lotin)" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "Paket o'rnatilmagan" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Amerika Samoasi" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "MandrakeExpert bo'ling" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Protokol" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "Sistemangizga shriftlardan nusxa ko'chirish" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "Harddrake yordam" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "Bogomips" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Mandrake terminal serverini moslash" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup hisobotining tafsilotlari\n" "\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr " \\#%s parallel portida" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Maxfiy so'zning eng qisqa uzunligini, undagi sonlarning va bosh harflarning " "eng kichik sonini aniqlash." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "agar \"ha\" bo'lsa, ochiq portlarni tekshirish" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Bu paketni tanlolmaysiz/tanlashni bekor qilolmaysiz" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Diqqat" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Boshqa fayllar:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "Uzoqdagi xostning nomi" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "X dasturlaridan foydalanishga ruxsat etish" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "Diskning Windows qismining hajmi hisoblanmoqda" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "/_Yangilash" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "Italiya" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Kayman Orollari" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Printerning nomi" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "%s'ni ajratishda xato: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "Bajarish!" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "%s javob bermayapti" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "Modelni o'zingiz tanlang" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Format qilish" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Har xil" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "Zip" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "Chap Alt tugmasi" #: ../../standalone/logdrake:1 #, c-format msgid "Load setting" msgstr "Moslamalarni yukash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake %s printeringizning modelini aniqlolmadi. Iltimos, quyidagi " "ro'yxatdan to'g'ri keladigan modelni tanlang." #: ../../standalone/printerdrake:1 #, c-format msgid "Set selected printer as the default printer" msgstr "Belgilangan printerni andoza deb belgilash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Siz uzatmoqchi bo'lgan printerni belgilang va\n" "\"Uzatish\" tugmasini bosing." #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "Albancha" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Litva" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Ixcham" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "Aniqlangan model: %s %s" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "MandrakeSoft siz uchun eng yaxshi dasturlarni tanladi" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "Lokal fayllar" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "balki" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Panama" #: ../../standalone/drakTermServ:1 #, c-format msgid "Can't open %s!" msgstr "%s'ni ochib bo'lmadi!" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Monitor" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 mingta rang (16 bit)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "Sistemangizdan shriftlarni olib tashlash" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "Sistema yuklanayotganda grafik interfeys" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr " adsl" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "RAID'ni %d chi darajasi uchun diskning etarli qismlari mavjud emas\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: true" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Quyidagi printerlar moslangan. Printerning moslamalarini o'zgartirish, uni " "andoza deb belgilash, yoki u haqida ma'lumotni ko'rish uchun uni ikki marta " "bosing." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "Ulangan" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Makedoncha" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Mali" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "Ko'priklar va sistemaning kontrollerlari" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Fayl/_Saqlash" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "Tafsilotlarsiz" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "juda yaxshi" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "Ko'rib chiqish" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "Uzoqdan boshqarish" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 serveri: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Gruzincha (rus)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/_Parametrlar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "Sizning printeringizning modeli" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Mandrake'ning ko'p maqsadli moslash vositasi" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "Saqlash" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "USB uskunalaringiz uchun drayverlarni yuklash." #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "Disk" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "Bosib chiqarish uskunasining URI'ni kiriting" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Isroil" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Frantsuz Gvineya" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "Buyruq kiritishi kerak!" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "Printerning moslamalarini uzatish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "%s (Port %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Kernel version" msgstr "Internet stantsiya" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Qabul qilish" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Server" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "Chap Shift tugmasi" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr " lokal tarmoq" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Noto'g'ri tanlov, boshqadan urinib ko'ring\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search new servers" msgstr "Yangi serverlarni qidirish" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "Xerd va MakDonald Orollari" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "Boshqa drayver yo'q" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Ekspert usuliga o'tish" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(shu kompyuterda)" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" "\"%s\"da asoslangan vin-modem aniqlandi, kerak bo'lgan dasturlarni " "o'rnatishni istaysizmi?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "Allaqachon o'rnatilgan paketlar qidirilmoqda..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Drayver" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "DVD-R device" msgstr "DVDR uskuna" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "Uzoqdagi LPD serveridagi printer" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "Chorshanba" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Olmoniya" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Avstriya" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Sichqoncha yo'q" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "Kompakt-disk/DVD'ning hajmini tanlang (Mb)" #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "O'rnatishdan kegin, tovush kartangizni moslash uchun, \"sndconfig\" " "dasturini ishga tushiring." #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Ro'yxatni yig'ish" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Tarmoqni moslash" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Operatsion sistema yuklagichini qaerga o'natmoqchisiz?" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "%s Mandrake Linux'ning bu versiyasi bilan ishlamaydi." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "tape" msgstr "Magnit tasma" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "DHCP klienti" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" "Foydalanuvchilarning ro'yxatini displey boshqaruvchilarda (KDM va GDM) " "ko'rsatish" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech sichqoncha (ketma-ket, eski C7 turi)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Fayldan (%s) qayta tiklash muvaffaqiyatsiz tugadi: %s" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Find Package" msgstr "%d paket" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" "Bu kompyuterga bosib chiqarish imkoniyatini o'rnatishga ishonchingiz " "komilmi?\n" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "Yangi devfs uskunasi" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Sistemani yukash uslubini moslash" #: ../../help.pm:1 #, c-format msgid "Automatic time synchronization" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Armancha (fonetik)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "Kartaning modeli:" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "Mandrake Linux 9.2 sistemasini tanlaganingiz uchun raxmat!" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "Serverni ishga tushirish" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Turkmaniston" #: ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "Hamma uzoqdagi kompyuterlar" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "Mavzularni o'rnatish" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "O'rnatishga tayorlanmoqda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "Tanlangan xostni/tarmoqni tuzatish" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "Foydalanuvchini qo'shish -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Nauru" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "True Type shriftlarini o'rnatish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Lokal tarmoqqa ulangan printerlarni avtomatik ravishda aniqlash" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "Lokal tarmoqni moslash" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "qattiq diskning modeli" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Eroncha" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Xorvatiya" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Geytvey:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "Serverni qo'shish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "Uzoqdagi printerning nomi" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Uskuna: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Litsenziya kelishuvi" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "Sistemaning parametrlari" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "Iltimos istalgan xavfsizlik darajasini tanlang" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" "Bu kompyuterning nomi ro'yxatda allaqachon bor, uni yana qo'shib bo'lmaydi.\n" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr ", USB printer" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "<span foreground=\"Red\"><tt>%s</tt></span>" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "X serverini moslash" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "hd" msgstr "Chad" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Turkcha (an'anaviy \"F\" modeli)" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Tabriklaymiz!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Allow remote root login" msgstr "Root uzoqdan kirishiga ruxsat etish" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "Pastga" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "rpm'ni o'rnatish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " "\"kprinter <file>\". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Qolgan vaqt " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "Buyuk Britaniya" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Uzish" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "Shriftlarni o'chirish" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Olmoncha (o'lik tugmalarsiz)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "\t%s'ga xat jo'natish\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "%s uzatilmoqda..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 mingta rang (15 bit)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "Siz NFS yoki Samba yordamida eksport qilishingiz mumkin. Siz qaysidan " "foydalanishni istaysiz?" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Reboot" msgstr "O'chirib-yoqish" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Gambiya" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "Mandrake boshqaruv markazi" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "Ko'p amalli uskuna" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "Har xil portlarni kiritishingiz mumkin.\n" "Masalan: 139/tcp 139/udp.\n" "Ma'lumot uchun /etc/services fayliga qarang." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "\t-Magnit tasma \n" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "Sistemangizda hech qanday brauzer o'rnatilmagan. Agar yordam sistemasini " "ko'rmoqchi bo'lsangiz, iltimos birortasini o'rnating" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "Bu maxfiy so'zni eslab qolish" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Tarmoq SSH orqali.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "Agar siz istagan printer avtomatik ravishda aniqlangan bo'lsa, uni " "ro'yxatdan tanlang va foydalanuvchini, maxfiy so'zni va kerak bo'lsa ishchi " "guruhni ko'rsating." #: ../../network/netconnect.pm:1 #, c-format msgid " cable" msgstr " kabel" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Diskning Windows qismidagi bo'sh joydan foydalanish" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s %s'da topildi, uni avtomatik ravishda moslaymi?" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 drayveri: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "Bu xost/tarmoq allaqachon ro'yxatda, uni yana qo'shib bo'lmaydi.\n" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Siz o'rnatmoqchi bo'lgan paketlarni tanlang" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Papua Yangi Gvineya" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on a parallel port" msgstr "Parallel portidagi ko'p amalli uskuna" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "Serbcha (kirilcha)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "Iltimos saqlash uchun direktoriyani kiriting:" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Bu printerni (\"%s\") andoza deb\n" "belgilashni istaysizmi?" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "DHCP'ning yuqori chegarasi" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Yuklash diski yaratilmoqda..." #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "Iltimos kutib turing, aloqa sinab ko'rilmoqda..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Tarmoq o'chirilmoqda" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "Foydalanuvchi" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "DHCP klienti" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "voz kechish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "\"%s\" yordamida bosib chiqarilmoqda/skan qilinmoqda" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "RAID modullarsiz" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "Irlandcha" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "Yakshanba" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "Internetga ulanishni moslash" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "vergul bilan ajratilgan sonlar" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Uskunani tanlasangiz, o'ng tarafdagi \"Ma'lumot\" freymida u haqida " "ma'lumotni ko'rishingiz mumkin" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "Belgilangan qoidani bir daraja yuqoriga ko'tarish" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Quyidagi skanner\n" "\n" "%s\n" "sistemangizda mavjud.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Rostdan printerni (\"%s\") olib tashlashni istaysizmi?" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "O'rnatish uchun joy topilmadi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "Andoza printer" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Internetga ulanish uchun siz bir necha usullarni mosladingiz.\n" "Foydanish uchun bittasini tanlang.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "RAID'ni o'zgartirish" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Men ISDN PCI kartani topdim, ammo menga uning turi noma'lum. Iltimos keyingi " "oynada PCI kartani tanlang." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Foydalanuvchini qo'shish" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID disklar %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Liberiya" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Iltimos Internetga ulangan interfeysni ko'rsating.\n" "\n" "Masalan:\n" "\t\tppp+ modem yoki DSL orqali ulanish uchun,\n" "\t\teth0 yoki eth1 kabel orqali ulanish uchun,\n" "\t\tippp+ ISDN orqali ulanish uchun.\n" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Diskning qismlarini format qilish" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "CUPS'ning moslamasini avtomatik ravishda to'g'rilash" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" ishga tushirilmoqda..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Loopback faylining nomi: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Iltimos bosib chiqarish vazifalari yuboriladigan printerni tanlang." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "Printerlarni uzatmash" #: ../../help.pm:1 #, c-format msgid "Delay before booting the default image" msgstr "Andoza OSni yuklashdan oldin kutib turish vaqti" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format msgid "Configure" msgstr "Moslash" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "Printer spulerini tanlash" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "Yangi mavzuni yaratish" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "Tasvir topilmadi" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Ba'zi bir muhim paketlar to'g'ri o'rnatilmadi.\n" "Sizning kompakt-disk uskunangizda yoki kompakt-diskingizda xato bor.\n" "Kompakt-diskni o'rnatilgan kompyuterda \"rpm -qpl Mandrake/RPMS/*.rpm\" " "buyrug'i bilan tekshirib ko'ring.\n" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "Mandrake Linux 9.2 - dastur tuzish uchun eng yaxshi poydevor" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "Aniqlangan model: %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "\"%s\" haqiqiy elektron pochta emas!" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "agar \"ha\" bo'lsa, kundalik xavfsizlik tekshirishlarini bajarish" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Ozarbayjon" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "%s'da magnit tasma yo'q!" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc <link> - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (AQSh)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Printer qaday ulangan?" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "Xavfsizlik darajasi" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "Xizmatlar" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 Mb" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Idora stantsiyasi" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Idora uchun dasturlar: matn protsessorlari (kword, abiword), elestron " "jadvallar (kspread, gnumeric), PDF ko'ruvchilar va hokazo" #: ../../share/compssUsers:999 msgid "Game station" msgstr "O'yin stantsiyasi" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Ovunchoq dasturlari: arcade, stol o'yinlari, strategiya va hokazo" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimedia stantsiyasi" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Audio va videoni o'ynatish/tuzatish dasturlari" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Internet stantsiya" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Xat-xabar va yangiliklarni o'qish va jo'natish (pine, mutt, tin...) va " "Internetni ko'rish vositalar to'plami." #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Tarmoqdagi kompyuter (klient)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Turli protokollar shu jumladan ssh uchun klientlar" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Moslash" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Kompyuteringizni moslashni engillashtirish uchun vositalar" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Ilmiy ish stantsiyasi" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "Gnuplot'ga o'xshagan ilmiy dasturlar" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Konsol vositalari" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Tahrirchilar, konsollar, fayl vositalari, terminallar" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE ish stantsiyasi" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "K Desktop Environment - vositalar to'plami bilan birga asosiy grafik muhit" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome ish stantsiyasi" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Foydalanuvchilar uchun qulay dasturlar va ish stoli vositalaridan iborat " "grafik muhit." #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Boshqa grafik ish stollari" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, va hokazo" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Qo'llanmalar" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Linux va bepul dasturlar bo'yicha kitoblar va Howto'lar" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Veb/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apachi, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "Xat-xabar" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "Postfix xat-xabar serveri" #: ../../share/compssUsers:999 msgid "Database" msgstr "M'lumot bazasi" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL yoki MySQL ma'lumot baza serveri" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Fayervol/Ruter" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internet uchun geytvey" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "DNS va NIS" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Tarmoqdagi kompyuter (server)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS serveri, SMB serveri, Proksi serveri, SSH serveri" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Xat-xabar va yangiliklarni o'qish va jo'natish va Internetni ko'rish " "vositalar to'plami." #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgstr "-adobe-utopia-regular-r-*-*-33-*-*-*-p-*-iso8859-*,*-r-*" #~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgstr "-urw-times-bold-r-normal--17-*-100-100-p-*-iso10646-1-*,*-r-*"