# translation of DrakX-uk.po to ukrainian
# Ukrainian translation of drakbootdisk
# Copyright (C) 2000,2003 Free Software Foundation, Inc.
# Dmytro  Kovalov <kov@tokyo.email.ne.jp>, 2000.
# Taras Boychuk <btr1@torba.com>, 2003.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-uk\n"
"POT-Creation-Date: 2004-03-19 14:32+0100\n"
"PO-Revision-Date: 2003-09-22 13:34+0300\n"
"Last-Translator: Taras Boychuk <btr1@torba.com>\n"
"Language-Team: ukrainian <uk@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.2\n"

#: ../move/move.pm:359
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
"Ваш USB ключ не має жодного розділу Windows (FAT).\n"
"Для продовження необхідний хоча б один такий розділ\n"
"(крім того, це більш стандартизований тип, так що Ви\n"
"зможете працювати зі своїми файлами з комп'ютерів \n"
"з Windows). Будь ласка, підключіть USB ключ, що\n"
"містить розділ Windows.\n"
"\n"
"\n"
"Ви також можете продовжувати без USB ключа - Ви\n"
"все одно зможете використовувати Mandrake Move як\n"
"звичайну операційну систему Mandrake."

#: ../move/move.pm:369
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
"На вашій системі не знайдено USB ключ. Якщо Ви\n"
"підключите USB ключ зараз, то Mandrake Move зможе\n"
"прозоро зберігати дані з вашої домашньої теки і\n"
"системну конфігурацію для наступного завантаження\n"
"цього або іншого комп'ютера. Майте на увазі, що якщо\n"
"Ви підключите USB ключ зараз, зачекайте декілька\n"
"секунд перед визначенням.\n"
"\n"
"\n"
"Ви також можете продовжити без USB ключа - Ви все\n"
"одно зможете використовувати Mandrake Move як\n"
"звичайну операційну систему Mandrake."

#: ../move/move.pm:380
#, c-format
msgid "Need a key to save your data"
msgstr "Для збереження Ваших даних необхідний ключ."

#: ../move/move.pm:382
#, c-format
msgid "Detect USB key again"
msgstr "Визначити USB ключ знову"

#: ../move/move.pm:383 ../move/move.pm:413
#, c-format
msgid "Continue without USB key"
msgstr "Продовжити без USB ключа"

#: ../move/move.pm:394 ../move/move.pm:408
#, fuzzy, c-format
msgid "Key isn't writable"
msgstr "XawTV не встановлено!"

#: ../move/move.pm:396
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
"Здається, що USB ключ має увімкнений захист від запису, але ми\n"
"можемо безпечно відімкнути його зараз.\n"
"\n"
"\n"
"Клацніть кнопку для перезавантаження комп'ютера, від'єднайте \n"
"його, зніміть захист від запису, під'єднайте ключ, і запустіть\n"
"Mandrake Move знову."

#: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1319
#, c-format
msgid "Reboot"
msgstr "Перезавантажити"

#: ../move/move.pm:410
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Здається, що USB ключ має увімкнений захист від запису.\n"
"Будь ласка, від'єднайте його, зніміть захист від запису,\n"
"і під'єднайте знову."

#: ../move/move.pm:412
#, fuzzy, c-format
msgid "Retry"
msgstr "Відновити"

#: ../move/move.pm:423
#, c-format
msgid "Setting up USB key"
msgstr "Встановлення USB ключа"

#: ../move/move.pm:423
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..."

#: ../move/move.pm:445
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Введіть Вашу інформацію користувача, пароль буде використовуватись для "
"зберігача екрану"

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Вибіркове налаштування"

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..."

#: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563
#: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117
#: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228
#: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384
#: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510
#: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82
#: install_steps_interactive.pm:40 interactive/http.pm:118
#: interactive/http.pm:119 network/netconnect.pm:929 network/netconnect.pm:932
#: network/netconnect.pm:977 network/netconnect.pm:981
#: network/netconnect.pm:1048 network/netconnect.pm:1098
#: network/netconnect.pm:1103 network/netconnect.pm:1118
#: network/netconnect.pm:1327 printer/printerdrake.pm:213
#: printer/printerdrake.pm:220 printer/printerdrake.pm:245
#: printer/printerdrake.pm:393 printer/printerdrake.pm:398
#: printer/printerdrake.pm:411 printer/printerdrake.pm:421
#: printer/printerdrake.pm:1067 printer/printerdrake.pm:1114
#: printer/printerdrake.pm:1151 printer/printerdrake.pm:1195
#: printer/printerdrake.pm:1199 printer/printerdrake.pm:1213
#: printer/printerdrake.pm:1303 printer/printerdrake.pm:1383
#: printer/printerdrake.pm:1387 printer/printerdrake.pm:1391
#: printer/printerdrake.pm:1440 printer/printerdrake.pm:1497
#: printer/printerdrake.pm:1501 printer/printerdrake.pm:1515
#: printer/printerdrake.pm:1625 printer/printerdrake.pm:1629
#: printer/printerdrake.pm:1666 printer/printerdrake.pm:1731
#: printer/printerdrake.pm:1749 printer/printerdrake.pm:1758
#: printer/printerdrake.pm:1767 printer/printerdrake.pm:1778
#: printer/printerdrake.pm:1840 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2551 printer/printerdrake.pm:2557
#: printer/printerdrake.pm:3010 printer/printerdrake.pm:3014
#: printer/printerdrake.pm:3018 printer/printerdrake.pm:3421
#: printer/printerdrake.pm:3664 printer/printerdrake.pm:3677
#: printer/printerdrake.pm:3817 printer/printerdrake.pm:3909
#: standalone/drakTermServ:415 standalone/drakTermServ:768
#: standalone/drakTermServ:775 standalone/drakTermServ:970
#: standalone/drakTermServ:1415 standalone/drakTermServ:1420
#: standalone/drakTermServ:1427 standalone/drakTermServ:1438
#: standalone/drakTermServ:1458 standalone/drakauth:36
#: standalone/drakbackup:581 standalone/drakbackup:694
#: standalone/drakbackup:1187 standalone/drakbackup:1220
#: standalone/drakbackup:1735 standalone/drakbackup:1898
#: standalone/drakbackup:2513 standalone/drakbackup:4286
#: standalone/drakbackup:4509 standalone/drakboot:237 standalone/drakbug:267
#: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:608
#: standalone/drakconnect:611 standalone/drakconnect:632
#: standalone/drakfloppy:301 standalone/drakfloppy:305
#: standalone/drakfloppy:311 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:259 standalone/drakfont:600 standalone/draksplash:21
#: standalone/logdrake:170 standalone/logdrake:467 standalone/logdrake:472
#: standalone/scannerdrake:58 standalone/scannerdrake:200
#: standalone/scannerdrake:259 standalone/scannerdrake:683
#: standalone/scannerdrake:694 standalone/scannerdrake:833
#: standalone/scannerdrake:844 standalone/scannerdrake:914 wizards.pm:95
#: wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Помилка"

#: ../move/move.pm:503 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Сталася помилка, але я не знаю, як з нею поводитися.\n"
"Продовжуйте на свій власний ризик."

#: ../move/move.pm:559 install_steps_interactive.pm:40
#, c-format
msgid "An error occurred"
msgstr "Сталася помилка"

#: ../move/move.pm:565
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Сталася помилка:\n"
"\n"
"\n"
"%s\n"
"\n"
"Це можливо через пошкоджені конфігураційні файли\n"
"на USB ключі, в цьому випадку їх видалення і наступне\n"
"перезавантаження Mandrake Move виправить проблему.\n"
"Для цього клацніть на відповідній кнопці.\n"
"\n"
"\n"
"Ви також можете перезавантажити і від'єднати USB\n"
"ключ, або перевірити його вміст в іншій ОС, або навіть\n"
"поглянути на файли журналів в консолі #3 і #4, щоб\n"
"спробувати здогадатися, що сталося."

#: ../move/move.pm:580
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Стерти файл зворотнього монтування?"

#: ../move/move.pm:581
#, c-format
msgid "Simply reboot"
msgstr "Просто перезавантажити"

#: ../move/tree/mdk_totem:60
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Ви можете продовжити тільки без підтримки CDROM"

#: ../move/tree/mdk_totem:81
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "доступ до X програм"

#: ../move/tree/mdk_totem:82
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Підтримка радіо:"

#: ../move/tree/mdk_totem:87
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Ви не можете використовувати інший CDROM, коли запущені наступні програми:\n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Копіювання до пам'яті, щоб дозволити забрати CDROM"

#: Xconfig/card.pm:16
#, c-format
msgid "256 kB"
msgstr "256 кб"

#: Xconfig/card.pm:17
#, c-format
msgid "512 kB"
msgstr "512 кб"

#: Xconfig/card.pm:18
#, c-format
msgid "1 MB"
msgstr "1 Мб"

#: Xconfig/card.pm:19
#, c-format
msgid "2 MB"
msgstr "2 Мб"

#: Xconfig/card.pm:20
#, c-format
msgid "4 MB"
msgstr "4 Мб"

#: Xconfig/card.pm:21
#, c-format
msgid "8 MB"
msgstr "8 Мб"

#: Xconfig/card.pm:22
#, c-format
msgid "16 MB"
msgstr "16 Мб"

#: Xconfig/card.pm:23
#, c-format
msgid "32 MB"
msgstr "32 Мб"

#: Xconfig/card.pm:24
#, c-format
msgid "64 MB or more"
msgstr "64 Мб чи більше"

#: Xconfig/card.pm:211
#, c-format
msgid "X server"
msgstr "X сервер"

#: Xconfig/card.pm:212
#, c-format
msgid "Choose an X server"
msgstr "Виберіть X сервер"

#: Xconfig/card.pm:244
#, c-format
msgid "Multi-head configuration"
msgstr "Конфіґурація з багатьма головками"

#: Xconfig/card.pm:245
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Ваша система підтримує налаштування багатосекційної головки.\n"
"Що Ви хочете зробити?"

#: Xconfig/card.pm:312
#, fuzzy, c-format
msgid "Can't install XFree package: %s"
msgstr "Встановлюється пакунок %s"

#: Xconfig/card.pm:322
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Виберіть розмір пам'яті Вашої графічної плати"

#: Xconfig/card.pm:398
#, c-format
msgid "XFree configuration"
msgstr "Налаштування XFree"

#: Xconfig/card.pm:400
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Яку конфігурацію XFree Ви хочете мати?"

#: Xconfig/card.pm:434
#, c-format
msgid "Configure all heads independently"
msgstr "Сконфіґурувати всі головки незалежно"

#: Xconfig/card.pm:435
#, c-format
msgid "Use Xinerama extension"
msgstr "Користуватися розширенням Xinerama"

#: Xconfig/card.pm:440
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Налаштувати тільки плату \"%s\" (%s)"

#: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s з апаратним прискоренням трьохвимірної графіки"

#: Xconfig/card.pm:470
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Ваша відеоплата може мати апаратне прискорення тривимірної графіки, \n"
"але тільки з сервером XFree %s. Ваша відеоплата підтримується сервером \n"
"XFree %s, у якому Ви, можливо, матимете кращу підтримку двовимірної\n"
"графіки."

#: Xconfig/card.pm:472 Xconfig/card.pm:495
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
"Ваша відеоплата може мати підтримку апаратного прискорення 3D з сервером "
"XFree %s."

#: Xconfig/card.pm:480 Xconfig/card.pm:501
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""
"XFree %s з ЕКСПЕРИМЕНТАЛЬНОЮ підтримкою апаратного прискорення трьохвимірної "
"графіки"

#: Xconfig/card.pm:483
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Ця відеоплата має підтримку апаратного прискорення тривимірної\n"
"графіки, але тільки для XFree %s, ЗАУВАЖТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n"
"РЕЖИМ, ЯКИЙ МОЖЕ ПРИЗВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА.\n"
"Ваша плата підтримується XFree %s, який має кращу підтримку двовимірної "
"графіки."

#: Xconfig/card.pm:486 Xconfig/card.pm:503
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Ця відеоплата має підтримку апаратного прискорення трьохвимірної\n"
"графіки, але тільки для XFree %s, ЗАУВАЖТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n"
"РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА."

#: Xconfig/card.pm:509
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (драйвер відображення встановлення)"

#: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:823
#, c-format
msgid "Custom"
msgstr "Спеціальний"

#: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14
#: install_steps_interactive.pm:83 printer/printerdrake.pm:608
#: printer/printerdrake.pm:4076 standalone/draksplash:120
#: standalone/harddrake2:188 standalone/logdrake:175
#: standalone/scannerdrake:445
#, c-format
msgid "Quit"
msgstr "Вийти"

#: Xconfig/main.pm:115
#, c-format
msgid "Graphic Card"
msgstr "Графічна карта"

#: Xconfig/main.pm:118 Xconfig/monitor.pm:100
#, c-format
msgid "Monitor"
msgstr "Монітор"

#: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228
#, c-format
msgid "Resolution"
msgstr "Роздільна здатність"

#: Xconfig/main.pm:126
#, c-format
msgid "Test"
msgstr "Перевірити"

#: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410
#: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:298
#: standalone/drakconnect:404 standalone/drakconnect:405
#: standalone/drakconnect:576 standalone/drakfont:494 standalone/drakfont:554
#: standalone/harddrake2:185
#, c-format
msgid "Options"
msgstr "Параметри"

#: Xconfig/main.pm:180
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Зберегти зміни?\n"
"Існуюча конфігурація:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:101
#, c-format
msgid "Choose a monitor"
msgstr "Виберіть тип монітору"

#: Xconfig/monitor.pm:107
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:108 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Загальний"

#: Xconfig/monitor.pm:109 standalone/drakconnect:556 standalone/harddrake2:68
#: standalone/harddrake2:69
#, c-format
msgid "Vendor"
msgstr "Виробник"

#: Xconfig/monitor.pm:119
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Пошук пристроїв Plug'n'Play завершився невдало. Будь-ласка, виберіть "
"відповідний монітор"

#: Xconfig/monitor.pm:124
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Двома дуже важливими параметрами є частота вертикальної розгортки\n"
"(тобто частота, з якою поновлюється зображення на екрані) та\n"
"найбільш важлива частота горизонтальної синхронізації (тобто та\n"
"частота, з якою на екрані малюються горизонтальні рядки).\n"
"\n"
"ДУЖЕ ВАЖЛИВО ПАМ'ЯТАТИ, що Ви повинні вибрати такий монітор, параметри\n"
"якого не перевищують справжніх параметрів Вашого монітора, інакше Ви\n"
"можете його пошкодити. \n"
"Якщо Ви маєте сумніви щодо характеристик свого монітора, виберіть\n"
"гірший монітор."

#: Xconfig/monitor.pm:131
#, c-format
msgid "Horizontal refresh rate"
msgstr "Частота горизонтальної розгортки"

#: Xconfig/monitor.pm:132
#, c-format
msgid "Vertical refresh rate"
msgstr "Частота вертикальної розгортки"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "265 кольорів (8 біт)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 тисячі кольорів (15 біт)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 тисяч кольорів (16 біт)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 мільйонів кольорів (24 біт)"

#: Xconfig/resolution_and_depth.pm:16
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 мільйярди кольорів (32 біт)"

#: Xconfig/resolution_and_depth.pm:141
#, c-format
msgid "Resolutions"
msgstr "Роздільні здатності"

#: Xconfig/resolution_and_depth.pm:275
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Виберіть роздільну здатність та кількість кольорів"

#: Xconfig/resolution_and_depth.pm:276
#, c-format
msgid "Graphics card: %s"
msgstr "Відеоплата: %s"

#: Xconfig/resolution_and_depth.pm:289 interactive.pm:403
#: interactive/gtk.pm:759 interactive/http.pm:103 interactive/http.pm:157
#: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakbackup:4045 standalone/drakbackup:4075
#: standalone/drakbackup:4162 standalone/drakbackup:4175
#: standalone/drakbackup:4247 standalone/drakconnect:165
#: standalone/drakconnect:776 standalone/drakconnect:863
#: standalone/drakconnect:962 standalone/drakups:194
#: standalone/net_monitor:303 ugtk2.pm:413 ugtk2.pm:510 ugtk2.pm:1075
#: ugtk2.pm:1098
#, c-format
msgid "Ok"
msgstr "Гаразд"

#: Xconfig/resolution_and_depth.pm:289 any.pm:863 diskdrake/smbnfs_gtk.pm:81
#: help.pm:197 help.pm:457 install_steps_gtk.pm:488
#: install_steps_interactive.pm:788 interactive.pm:404 interactive/gtk.pm:763
#: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307
#: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3088
#: standalone/drakautoinst:217 standalone/drakbackup:4009
#: standalone/drakbackup:4035 standalone/drakbackup:4058
#: standalone/drakbackup:4089 standalone/drakbackup:4113
#: standalone/drakbackup:4137 standalone/drakbackup:4189
#: standalone/drakbackup:4216 standalone/drakbackup:4241
#: standalone/drakconnect:164 standalone/drakconnect:861
#: standalone/drakconnect:961 standalone/drakfont:663 standalone/drakfont:740
#: standalone/drakups:201 standalone/logdrake:175 standalone/net_monitor:299
#: ugtk2.pm:407 ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:1075
#, c-format
msgid "Cancel"
msgstr "Скасувати"

#: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154
#: install_steps_gtk.pm:267 install_steps_gtk.pm:668 interactive.pm:498
#: interactive/gtk.pm:623 interactive/gtk.pm:625 standalone/drakTermServ:316
#: standalone/drakbackup:4010 standalone/drakbackup:4039
#: standalone/drakbackup:4062 standalone/drakbackup:4093
#: standalone/drakbackup:4117 standalone/drakbackup:4141
#: standalone/drakbackup:4174 standalone/drakbackup:4193
#: standalone/drakbackup:4220 standalone/drakbackup:4245
#: standalone/drakbackup:4264 standalone/drakbug:157
#: standalone/drakconnect:160 standalone/drakconnect:236
#: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:296
#: standalone/harddrake2:184 ugtk2.pm:1188 ugtk2.pm:1189
#, c-format
msgid "Help"
msgstr "Довідка"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Тестування конфіґурації"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Чи хочете Ви випробувати нову конфіґурацію?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Попередження: тестування цієї графічної карти може призвести до зависання "
"Вашого комп'ютера"

#: Xconfig/test.pm:71
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Сталася помилка:\n"
"%s\n"
"Спробуйте змінити деякі параметри"

#: Xconfig/test.pm:149
#, c-format
msgid "Leaving in %d seconds"
msgstr "Залишається %d секунд"

#: Xconfig/test.pm:149
#, c-format
msgid "Is this the correct setting?"
msgstr "Це правильні установки?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Розкладка клавіатури: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Тип миші: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Миша: %s\n"

#: Xconfig/various.pm:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Монітор: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Горизонтальна синхронізація монітора: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Частота вертикальної розгортки монітора: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Графічна плата: %s\n"

#: Xconfig/various.pm:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Відео пам'ять: %sкб\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Глибина кольору: %s\n"

#: Xconfig/various.pm:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Роздільна здатність: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "Сервер XFree86: %s\n"

#: Xconfig/various.pm:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 драйвер: %s\n"

#: Xconfig/various.pm:71
#, c-format
msgid "Graphical interface at startup"
msgstr "Графічний інтерфейс при завантаженні"

#: Xconfig/various.pm:73
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Я можу налаштувати Вашу систему, щоб графічний інтерфейс (XFree) стартував "
"автоматично\n"
"після завантаження системи. Чи Ви хочете, щоб XFree стартував автоматично?"

#: Xconfig/various.pm:86
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Схоже, Ваша відеокарта має конектор TV-OUT.\n"
"Вона може бути налаштована для роботи з використанням буфера кадрів.\n"
"\n"
"Для цього Ви повинні під'єднати відеокарту до телевізора перед завантаженням "
"комп'ютера.\n"
"Потім виберіть пункт \"TVout\" в завантажувачі\n"
"\n"
"У Вас є така можливість?"

#: Xconfig/various.pm:98
#, c-format
msgid "What norm is your TV using?"
msgstr "Який формат використовує Ваш телевізор?"

#: any.pm:103 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259
#: standalone/drakconnect:167 standalone/draksec:56 standalone/drakups:90
#: standalone/drakxtv:90 standalone/harddrake2:134
#: standalone/service_harddrake:98
#, c-format
msgid "Please wait"
msgstr "Зачекайте, будь-ласка"

#: any.pm:103
#, c-format
msgid "Bootloader installation in progress"
msgstr "Триває встановлення завантажувача"

#: any.pm:142
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Ви дозволили встановити bootloader в розділ.\n"
"Це передбачає, що Ви маєте bootloader на твердому диску, з якого Ви "
"завантажилися (напр.: System Commander).\n"
"\n"
"З якого диска Ви завантажуєтеся?"

#: any.pm:165 any.pm:197 help.pm:800
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Перший сектор диску (MBR)"

#: any.pm:166
#, c-format
msgid "First sector of the root partition"
msgstr "Перший сектор системного розділу (boot partition)"

#: any.pm:168
#, c-format
msgid "On Floppy"
msgstr "На дискету"

#: any.pm:170 help.pm:768 help.pm:800 printer/printerdrake.pm:3418
#, c-format
msgid "Skip"
msgstr "Пропустити"

#: any.pm:175
#, c-format
msgid "SILO Installation"
msgstr "Встановлення SILO"

#: any.pm:175
#, c-format
msgid "LILO/grub Installation"
msgstr "Встановлення LILO/grub"

#: any.pm:176
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Де Ви хочете встановити завантажувач?"

#: any.pm:197
#, c-format
msgid "First sector of boot partition"
msgstr "Перший сектор системного розділу (boot partition)"

#: any.pm:208
#, c-format
msgid "Boot Style Configuration"
msgstr "Налаштування стилю завантаження"

#: any.pm:210 any.pm:244
#, c-format
msgid "Bootloader main options"
msgstr "Основні параметри завантажувача"

#: any.pm:214
#, c-format
msgid "Give the ram size in MB"
msgstr "Вкажіть розмір пам'яті в Мб"

#: any.pm:216
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Параметр ``Обмежити параметри командного рядка'' не використовується без "
"пароля"

#: any.pm:217 any.pm:524 install_steps_interactive.pm:1163
#, c-format
msgid "The passwords do not match"
msgstr "Паролі не співпадають"

#: any.pm:217 any.pm:524 diskdrake/interactive.pm:1255
#: install_steps_interactive.pm:1163
#, c-format
msgid "Please try again"
msgstr "Будь-ласка, спробуйте ще раз"

#: any.pm:222 any.pm:247 help.pm:768
#, c-format
msgid "Bootloader to use"
msgstr "Використовувати завантажувач"

#: any.pm:224
#, c-format
msgid "Bootloader installation"
msgstr "Встановлення завантажувача"

#: any.pm:226 any.pm:249 help.pm:768
#, c-format
msgid "Boot device"
msgstr "Пристрій завантаження"

#: any.pm:228
#, c-format
msgid "Delay before booting default image"
msgstr "Пауза перед завантаженням основної системи"

#: any.pm:229 help.pm:768
#, c-format
msgid "Enable ACPI"
msgstr "Увімкнути ACPI"

#: any.pm:230
#, c-format
msgid "Force No APIC"
msgstr "Заборонити APIC"

#: any.pm:232 any.pm:551 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1168 network/netconnect.pm:562
#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1494
#: standalone/drakbackup:1717 standalone/drakbackup:3592
#: standalone/drakups:278
#, c-format
msgid "Password"
msgstr "Пароль"

#: any.pm:233 any.pm:552 install_steps_interactive.pm:1169
#, c-format
msgid "Password (again)"
msgstr "Пароль (ще раз)"

#: any.pm:234
#, c-format
msgid "Restrict command line options"
msgstr "Обмежити параметри командного рядка"

#: any.pm:234
#, c-format
msgid "restrict"
msgstr "обмежити"

#: any.pm:236
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Очищати /tmp при кожному перезавантаженні"

#: any.pm:237
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Уточніть об'єм RAM, якщо потрібно (знайдено %d Мб)"

#: any.pm:239
#, c-format
msgid "Enable multiple profiles"
msgstr "Дозволити багатопрофільність"

#: any.pm:248
#, c-format
msgid "Init Message"
msgstr "Повідомлення ініціалізації"

#: any.pm:250
#, c-format
msgid "Open Firmware Delay"
msgstr "Затримка Open Firmware"

#: any.pm:251
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Затримка при завантаженні ядра"

#: any.pm:252
#, c-format
msgid "Enable CD Boot?"
msgstr "Дозволити завантаження з компакт-диску?"

#: any.pm:253
#, c-format
msgid "Enable OF Boot?"
msgstr "Дозволити завантаження OF?"

#: any.pm:254
#, c-format
msgid "Default OS?"
msgstr "Основна система?"

#: any.pm:295
#, c-format
msgid "Image"
msgstr "Образ"

#: any.pm:296 any.pm:305
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:297 any.pm:318
#, c-format
msgid "Append"
msgstr "Приєднати"

#: any.pm:299
#, c-format
msgid "Video mode"
msgstr "Відео-режим"

#: any.pm:301
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:310 any.pm:315 any.pm:317
#, c-format
msgid "Label"
msgstr "Мітка"

#: any.pm:312 any.pm:322 harddrake/v4l.pm:236 standalone/drakfloppy:88
#: standalone/drakfloppy:94
#, c-format
msgid "Default"
msgstr "Основна"

#: any.pm:319
#, c-format
msgid "Initrd-size"
msgstr "Розмір Initrd"

#: any.pm:321
#, c-format
msgid "NoVideo"
msgstr "БезВідео"

#: any.pm:332
#, c-format
msgid "Empty label not allowed"
msgstr "Не дозволяються порожні мітки"

#: any.pm:333
#, c-format
msgid "You must specify a kernel image"
msgstr "Ви повинні вказати образ ядра"

#: any.pm:333
#, c-format
msgid "You must specify a root partition"
msgstr "Ви повинні вказати кореневий розділ"

#: any.pm:334
#, c-format
msgid "This label is already used"
msgstr "Ця етикетка вже використовується"

#: any.pm:347
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Який тип вводу Ви хочете додати?"

#: any.pm:348
#, c-format
msgid "Linux"
msgstr "Лінакс"

#: any.pm:348
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Інші операційні системи (SunOS...)"

#: any.pm:349
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Інші системи (MacOS...)"

#: any.pm:349
#, c-format
msgid "Other OS (windows...)"
msgstr "Інші операційні системи (windows...)"

#: any.pm:377
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Тут наведені пункти меню завантаження.\n"
"Ви можете створити додаткові пункти або змінити існуючі."

#: any.pm:509
#, c-format
msgid "access to X programs"
msgstr "доступ до X програм"

#: any.pm:510
#, c-format
msgid "access to rpm tools"
msgstr "доступ до засобів rpm"

#: any.pm:511
#, c-format
msgid "allow \"su\""
msgstr "дозволити \"su\""

#: any.pm:512
#, c-format
msgid "access to administrative files"
msgstr "доступ до виконавчих файлів"

#: any.pm:513
#, c-format
msgid "access to network tools"
msgstr "доступ до мережевих засобів"

#: any.pm:514
#, c-format
msgid "access to compilation tools"
msgstr "доступ до інструментів компіляції"

#: any.pm:520
#, c-format
msgid "(already added %s)"
msgstr "(вже додано %s)"

#: any.pm:525
#, c-format
msgid "This password is too simple"
msgstr "Пароль занадто простий"

#: any.pm:526
#, c-format
msgid "Please give a user name"
msgstr "Дайте, будь-ласка, ім'я користувача"

#: any.pm:527
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Ім'я користувача повинно складатися тільки з малих латинських літер,\n"
"чисел, `-' та `_'"

#: any.pm:528
#, c-format
msgid "The user name is too long"
msgstr "Ім'я користувача занадто довге"

#: any.pm:529
#, c-format
msgid "This user name has already been added"
msgstr "Таке ім'я користувача вже створене раніше"

#: any.pm:533
#, c-format
msgid "Add user"
msgstr "Додати користувача"

#: any.pm:534
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Введіть користувача\n"
"%s"

#: any.pm:537 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158
#: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544
#: interactive/http.pm:152 printer/printerdrake.pm:165
#: printer/printerdrake.pm:352 printer/printerdrake.pm:4076
#: standalone/drakbackup:2802 standalone/scannerdrake:636
#: standalone/scannerdrake:786
#, c-format
msgid "Done"
msgstr "Виконано"

#: any.pm:538 help.pm:52
#, c-format
msgid "Accept user"
msgstr "Прийняти користувача"

#: any.pm:549
#, c-format
msgid "Real name"
msgstr "Дійсна назва"

#: any.pm:550 help.pm:52 printer/printerdrake.pm:1373
#: printer/printerdrake.pm:1493
#, c-format
msgid "User name"
msgstr "Ім'я користувача"

#: any.pm:553
#, c-format
msgid "Shell"
msgstr "Командна оболонка"

#: any.pm:555
#, c-format
msgid "Icon"
msgstr "Піктограма"

#: any.pm:596 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Автореєстрація"

#: any.pm:597
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Я можу налаштувати Ваш комп'ютер так, щоб автоматично реєструвався\n"
"один користувач."

#: any.pm:598 help.pm:52
#, c-format
msgid "Do you want to use this feature?"
msgstr "Ви хочете використовувати цю можливість?"

#: any.pm:599
#, c-format
msgid "Choose the default user:"
msgstr "Виберіть стандартного користувача:"

#: any.pm:600
#, c-format
msgid "Choose the window manager to run:"
msgstr "Виберіть менеджер вікон, яким Ви хочете користуватися:"

#: any.pm:612
#, c-format
msgid "Please choose a language to use."
msgstr "Виберіть, будь-ласка, мову."

#: any.pm:633
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Лінакс Мандрейк може підтримувати багато мов. Виберіть\n"
"мови, які Ви хочете встановити. Вони стануть доступними\n"
"після завершення встановлення і перезавантаження системи."

#: any.pm:651 help.pm:660
#, c-format
msgid "Use Unicode by default"
msgstr "Використовувати Unicode типово"

#: any.pm:652 help.pm:660
#, c-format
msgid "All languages"
msgstr "Всі мови"

#: any.pm:688 help.pm:581 help.pm:991 install_steps_interactive.pm:908
#, c-format
msgid "Country / Region"
msgstr "Країна / Регіон"

#: any.pm:689
#, c-format
msgid "Please choose your country."
msgstr "Будь-ласка, вкажіть Вашу країну."

#: any.pm:691
#, c-format
msgid "Here is the full list of available countries"
msgstr "Тут наведено повний список можливих країн"

#: any.pm:692 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621
#: help.pm:991 install_steps_interactive.pm:114
#, c-format
msgid "More"
msgstr "Ще"

#: any.pm:823
#, c-format
msgid "No sharing"
msgstr "Немає спільного доступу"

#: any.pm:823
#, c-format
msgid "Allow all users"
msgstr "Дозволити всіх користувачів"

#: any.pm:827
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Чи хотіли б Ви дозволити користувачам надавати доступ до деяких з їхніх "
"тек? \n"
"Такий дозвіл дасть можливість користувачам просто натискати на \"доступ\" в "
"konqueror та nautilus.\n"
"\n"
"\"Вибірково\" дозволяє надати доступ окремим користувачам \n"

#: any.pm:843
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
"Ви можете експортувати за допомогою NFS або Samba. Будь-ласка, виберіть, чим "
"Ви б хотіли скористатися."

#: any.pm:851
#, fuzzy, c-format
msgid "The package %s is going to be removed."
msgstr "Наступні пакунки будуть вилучені"

#: any.pm:863
#, c-format
msgid "Launch userdrake"
msgstr "Запуск userdrake"

#: any.pm:865
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Доступ для окремих користувачів здійснюється групою \"fileshare\". \n"
"Ви можете використовувати userdrake, щоб додати користувача в цю групу."

#: authentication.pm:12
#, c-format
msgid "Local files"
msgstr "Локальні файли"

#: authentication.pm:12
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:12
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:12 authentication.pm:50
#, c-format
msgid "Windows Domain"
msgstr "Домен Windows"

#: authentication.pm:33
#, c-format
msgid "Authentication LDAP"
msgstr "Автентикація LDAP"

#: authentication.pm:34
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: authentication.pm:35
#, c-format
msgid "LDAP Server"
msgstr "Сервер LDAP"

#: authentication.pm:40
#, c-format
msgid "Authentication NIS"
msgstr "NIS автентикація"

#: authentication.pm:41
#, c-format
msgid "NIS Domain"
msgstr "Домен NIS"

#: authentication.pm:42
#, c-format
msgid "NIS Server"
msgstr "Сервер NIS"

#: authentication.pm:47
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Для того, щоб це запрацювало під W2K PDC, Вам, можливо, потрібно виконати "
"під адміністратором: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access"
"\" everyone /add і перезавантажити сервер.\n"
"Вам також буде потрібно ім'я_користувача/пароль адміністратора домена, щоб "
"під'єднати машину до домена Windows(TM).\n"
"Якщо мережу ще не увімкнено, DrakX спробує під'єднатися до домена після "
"завершення етапу встановлення мережі.\n"
"Якщо з якої-небудь причини це встановлення завершилось невдало і "
"автентифікація в домені не працює, виконайте 'smbpasswd -j ДОМЕН -U "
"КОРИСТУВАЧ%%ПАРОЛЬ', використовуючи домен і ім'я_користувача/пароль своєї "
"Windows(tm), після завантаження системи.\n"
"Команда 'wbinfo -t' перевірить, наскільки секретна Ваша автентифікація."

#: authentication.pm:49
#, c-format
msgid "Authentication Windows Domain"
msgstr "Автентикація домену Віндовс"

#: authentication.pm:51
#, c-format
msgid "Domain Admin User Name"
msgstr "Ім'я користувача - адміністратора домена"

#: authentication.pm:52
#, c-format
msgid "Domain Admin Password"
msgstr "Пароль адміністратора домена"

#: authentication.pm:83
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Не можу використовувати трансляцію без NIS-домена"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:533
#, fuzzy, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Laskavo prosymo do %s - peremykacha operaciynih system!\n"
"\n"
"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n"
"poki pochne vantazhytysja persha z inh.\n"
"\n"

#: bootloader.pm:665
#, c-format
msgid "SILO"
msgstr "SILO"

#: bootloader.pm:668 help.pm:768
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO з графічним меню"

#: bootloader.pm:670 help.pm:768
#, c-format
msgid "LILO with text menu"
msgstr "LILO з текстовим меню"

#: bootloader.pm:672
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:674
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:1147
#, c-format
msgid "not enough room in /boot"
msgstr "недостатньо місця в /boot"

#: bootloader.pm:1175
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Ви не можете встановити завантажувач в розділ %s\n"

#: bootloader.pm:1219
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"Конфігурація Вашого завантажувача має бути поновлена, бо розділи були "
"перенумеровані"

#: bootloader.pm:1226
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Завантажувач не може бути коректно встановлений. Вам необхідно завантажити "
"rescue, і вибрати \"%s\""

#: bootloader.pm:1227
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Встановити завантажувач"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "кб"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "Мб"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "Ґб"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "ТБ"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d хвилин"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 хвилина"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d секунд"

#: common.pm:197
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Не можу робити знімки екрану перед розбиттям на розділи"

#: common.pm:204
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Знімки екрану стануть можливими після встановвлення в %s"

#: common.pm:269
#, c-format
msgid "kdesu missing"
msgstr "немає kdesu"

#: common.pm:272
#, c-format
msgid "consolehelper missing"
msgstr "немає consolehelper"

#: crypto.pm:14 crypto.pm:28 lang.pm:236 network/adsl_consts.pm:44
#: network/adsl_consts.pm:55 network/adsl_consts.pm:65
#: network/adsl_consts.pm:75 network/adsl_consts.pm:86
#: network/adsl_consts.pm:97 network/adsl_consts.pm:107
#: network/adsl_consts.pm:117 network/adsl_consts.pm:264
#: network/netconnect.pm:46
#, c-format
msgid "France"
msgstr "Франція"

#: crypto.pm:15 lang.pm:212
#, c-format
msgid "Costa Rica"
msgstr "Коста-Ріка"

#: crypto.pm:16 crypto.pm:29 lang.pm:184 network/adsl_consts.pm:26
#: network/adsl_consts.pm:36 network/netconnect.pm:49
#, c-format
msgid "Belgium"
msgstr "Бельгія"

#: crypto.pm:17 crypto.pm:30 lang.pm:217
#, c-format
msgid "Czech Republic"
msgstr "Чешська республіка"

#: crypto.pm:18 crypto.pm:31 lang.pm:218 network/adsl_consts.pm:134
#: network/adsl_consts.pm:142
#, c-format
msgid "Germany"
msgstr "Німеччина"

#: crypto.pm:19 crypto.pm:32 lang.pm:249
#, c-format
msgid "Greece"
msgstr "Греція"

#: crypto.pm:20 crypto.pm:33 lang.pm:322
#, c-format
msgid "Norway"
msgstr "Норвегія"

#: crypto.pm:21 crypto.pm:34 lang.pm:351 network/adsl_consts.pm:240
#, c-format
msgid "Sweden"
msgstr "Швеція"

#: crypto.pm:22 crypto.pm:36 lang.pm:321 network/adsl_consts.pm:178
#: network/netconnect.pm:47
#, c-format
msgid "Netherlands"
msgstr "Голандія"

#: crypto.pm:23 crypto.pm:37 lang.pm:269 network/adsl_consts.pm:158
#: network/adsl_consts.pm:168 network/netconnect.pm:48 standalone/drakxtv:48
#, c-format
msgid "Italy"
msgstr "Італія"

#: crypto.pm:24 crypto.pm:38 lang.pm:177
#, c-format
msgid "Austria"
msgstr "Австрія"

#: crypto.pm:35 crypto.pm:65 lang.pm:385 network/netconnect.pm:50
#, c-format
msgid "United States"
msgstr "Сполучені Штати"

#: diskdrake/dav.pm:19
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV - це протокол, який дозволяє Вам локально монтувати теки\n"
"веб-сервера, інтерпретуючи їх як локальну файлову систему (якщо\n"
"веб-сервер сконфігуровано як сервер WebDAV). Якщо Ви захочете\n"
"додати точки монтування WebDAV, виберіть \"Нова\"."

#: diskdrake/dav.pm:27
#, c-format
msgid "New"
msgstr "Новий"

#: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Розмонтувати"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Монтувати"

#: diskdrake/dav.pm:65 help.pm:137
#, c-format
msgid "Server"
msgstr "Сервер"

#: diskdrake/dav.pm:66 diskdrake/interactive.pm:408
#: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Точка монтування"

#: diskdrake/dav.pm:85
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Будь-ласка, вкажіть посилання на сервер WebDAV"

#: diskdrake/dav.pm:89
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "адреса повинна починатися з http:// або https://"

#: diskdrake/dav.pm:111
#, c-format
msgid "Server: "
msgstr "Сервер: "

#: diskdrake/dav.pm:112 diskdrake/interactive.pm:469
#: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225
#, c-format
msgid "Mount point: "
msgstr "Точка монтування: "

#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233
#, c-format
msgid "Options: %s"
msgstr "Параметри: %s"

#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995
#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065
#, c-format
msgid "Read carefully!"
msgstr "Читайте уважно!"

#: diskdrake/hd_gtk.pm:96
#, c-format
msgid "Please make a backup of your data first"
msgstr "Будь-ласка, створіть спочатку резерну копію Ваших даних"

#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Якщо Ви збираєтесь користуватися aboot, не забудьте залишити вільний\n"
"розділ (достатньо 2048 секторів) на початку диску"

#: diskdrake/hd_gtk.pm:156 help.pm:544
#, c-format
msgid "Wizard"
msgstr "Помічник"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid "Choose action"
msgstr "Виберіть дію"

#: diskdrake/hd_gtk.pm:193
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Ви маєте один великий розділ Microsoft Windows.\n"
"Я пропоную Вам спочатку змінити розмір цього розділу\n"
"(клацніть на ньому, потім клацніть на \"Змінити розмір\")"

#: diskdrake/hd_gtk.pm:195
#, c-format
msgid "Please click on a partition"
msgstr "Клацніть, будь-ласка, на розділі"

#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:475
#: standalone/drakbackup:3040 standalone/drakbackup:3102
#, c-format
msgid "Details"
msgstr "Подробиці"

#: diskdrake/hd_gtk.pm:255
#, c-format
msgid "No hard drives found"
msgstr "Не знайдено твердих дисків"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Journalised FS"
msgstr "Журнальна файлова система"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:327 mouse.pm:167
#: services.pm:164 standalone/drakbackup:1673 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Інші"

#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165
#, c-format
msgid "Empty"
msgstr "Порожній"

#: diskdrake/hd_gtk.pm:331
#, c-format
msgid "Filesystem types:"
msgstr "Типи файлових систем:"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``%s'' instead"
msgstr "Замість цього скористайтеся ``%s''"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353
#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569
#: diskdrake/removable.pm:26 diskdrake/removable.pm:49
#: standalone/harddrake2:67
#, c-format
msgid "Type"
msgstr "Тип"

#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431
#, c-format
msgid "Create"
msgstr "Створити"

#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418
#: standalone/drakperm:124 standalone/printerdrake:231
#, c-format
msgid "Delete"
msgstr "Видалити"

#: diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Спочатку скористуйтеся ``Розмонтувати''"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose another partition"
msgstr "Створити інший розділ"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose a partition"
msgstr "Виберіть розділ"

#: diskdrake/interactive.pm:208
#, c-format
msgid "Exit"
msgstr "Вийти"

#: diskdrake/interactive.pm:241 help.pm:544
#, c-format
msgid "Undo"
msgstr "Повернути дію"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to normal mode"
msgstr "Перемикнути в нормальний режим"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to expert mode"
msgstr "Перемикнути в режим експерта"

#: diskdrake/interactive.pm:260
#, c-format
msgid "Continue anyway?"
msgstr "Все-таки продовжувати?"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without saving"
msgstr "Вийти без запису"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Вийти без запису таблиці розділів?"

#: diskdrake/interactive.pm:270
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Чи хочете Ви зберегти зміни в /etc/fstab?"

#: diskdrake/interactive.pm:277 install_steps_interactive.pm:301
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Для того, щоб таблиця розділів була активізована, Вам треба\n"
"перезавантажити систему"

#: diskdrake/interactive.pm:290 help.pm:544
#, c-format
msgid "Clear all"
msgstr "Очистити все"

#: diskdrake/interactive.pm:291 help.pm:544
#, c-format
msgid "Auto allocate"
msgstr "Автоматично розподілити"

#: diskdrake/interactive.pm:297
#, c-format
msgid "Hard drive information"
msgstr "Інформація про твердий диск"

#: diskdrake/interactive.pm:329
#, c-format
msgid "All primary partitions are used"
msgstr "Всі первинні розділи використовуються"

#: diskdrake/interactive.pm:330
#, c-format
msgid "I can't add any more partitions"
msgstr "Не можу додати жодного розділу"

#: diskdrake/interactive.pm:331
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Щоб мати більше розділів, зітріть один з них, щоб створити розширений розділ"

#: diskdrake/interactive.pm:342 help.pm:544
#, c-format
msgid "Save partition table"
msgstr "Зберегти таблицю розділів"

#: diskdrake/interactive.pm:343 help.pm:544
#, c-format
msgid "Restore partition table"
msgstr "Відновити таблицю розділів"

#: diskdrake/interactive.pm:344 help.pm:544
#, c-format
msgid "Rescue partition table"
msgstr "Аварійна таблиця розділів"

#: diskdrake/interactive.pm:346 help.pm:544
#, c-format
msgid "Reload partition table"
msgstr "Перечитати таблицю розділів"

#: diskdrake/interactive.pm:348
#, c-format
msgid "Removable media automounting"
msgstr "Автоматичне монтування змінних носіїв"

#: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377
#, c-format
msgid "Select file"
msgstr "Виберіть файл"

#: diskdrake/interactive.pm:364
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Копія таблиці розділів має інший розмір.\n"
"Все-таки продовжувати?"

#: diskdrake/interactive.pm:378 harddrake/sound.pm:226 keyboard.pm:314
#: network/netconnect.pm:438 network/netconnect.pm:457
#: network/netconnect.pm:641 printer/printerdrake.pm:936
#: printer/printerdrake.pm:1891 printer/printerdrake.pm:1953
#: printer/printerdrake.pm:1987 printer/printerdrake.pm:2291
#: printer/printerdrake.pm:3149 printer/printerdrake.pm:3426
#: printer/printerdrake.pm:3545 printer/printerdrake.pm:4543
#: standalone/drakTermServ:351 standalone/drakTermServ:1082
#: standalone/drakTermServ:1138 standalone/drakTermServ:1801
#: standalone/drakbackup:580 standalone/drakbackup:678 standalone/drakboot:138
#: standalone/drakclock:204 standalone/drakconnect:898
#: standalone/drakfloppy:295 standalone/drakups:27 standalone/scannerdrake:50
#: standalone/scannerdrake:908
#, c-format
msgid "Warning"
msgstr "Попередження"

#: diskdrake/interactive.pm:379
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Вставте дискету в дисковод\n"
"Всі дані на цій дискеті будуть втрачені"

#: diskdrake/interactive.pm:390
#, c-format
msgid "Trying to rescue partition table"
msgstr "Пробую відновити таблицю розділів"

#: diskdrake/interactive.pm:396
#, c-format
msgid "Detailed information"
msgstr "Детальна інформація"

#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706
#, c-format
msgid "Resize"
msgstr "Змінити розмір"

#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774
#, c-format
msgid "Move"
msgstr "Перемістити"

#: diskdrake/interactive.pm:413
#, c-format
msgid "Format"
msgstr "Форматувати"

#: diskdrake/interactive.pm:415
#, c-format
msgid "Add to RAID"
msgstr "Додати до RAID"

#: diskdrake/interactive.pm:416
#, c-format
msgid "Add to LVM"
msgstr "Додати до LVM"

#: diskdrake/interactive.pm:419
#, c-format
msgid "Remove from RAID"
msgstr "Видалити з RAID"

#: diskdrake/interactive.pm:420
#, c-format
msgid "Remove from LVM"
msgstr "Видалити з LVM"

#: diskdrake/interactive.pm:421
#, c-format
msgid "Modify RAID"
msgstr "Змінити RAID"

#: diskdrake/interactive.pm:422
#, c-format
msgid "Use for loopback"
msgstr "Використовувати для зворотнього монтування"

#: diskdrake/interactive.pm:462
#, c-format
msgid "Create a new partition"
msgstr "Створити новий розділ"

#: diskdrake/interactive.pm:465
#, c-format
msgid "Start sector: "
msgstr "Початковий сектор: "

#: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876
#, c-format
msgid "Size in MB: "
msgstr "Розмір (Мб): "

#: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877
#, c-format
msgid "Filesystem type: "
msgstr "Тип файлової системи: "

#: diskdrake/interactive.pm:473
#, c-format
msgid "Preference: "
msgstr "Перевага: "

#: diskdrake/interactive.pm:476
#, c-format
msgid "Logical volume name "
msgstr "Назва логічного диску"

#: diskdrake/interactive.pm:505
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Ви не можете створити новий розділ\n"
"(оскільки Ви вже досягли максимальної кількості первинних розділів).\n"
"Спочатку видаліть первинний розділ і створіть додатковий."

#: diskdrake/interactive.pm:535
#, c-format
msgid "Remove the loopback file?"
msgstr "Стерти файл зворотнього монтування?"

#: diskdrake/interactive.pm:554
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "Після зміни типу розділу %s всі дані на ньому будуть втрачені"

#: diskdrake/interactive.pm:565
#, c-format
msgid "Change partition type"
msgstr "Змінити тип розділу"

#: diskdrake/interactive.pm:566 diskdrake/removable.pm:48
#, c-format
msgid "Which filesystem do you want?"
msgstr "Яку файлову систему Ви хочете?"

#: diskdrake/interactive.pm:574
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Перемикаюсь з ext2 на ext3"

#: diskdrake/interactive.pm:603
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Де Ви хочете змонтувати файл зворотнього монтування %s?"

#: diskdrake/interactive.pm:604
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Де Ви хочете змонтувати пристрій %s?"

#: diskdrake/interactive.pm:609
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Не можу змінити точку монтування даного розділу, оскільки він\n"
"використовується для зворотнього монтування. Спочатку відмініть\n"
"зворотнє монтування."

#: diskdrake/interactive.pm:634
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Де Ви хочете змонтувати пристрій %s?"

#: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738
#: install_interactive.pm:156 install_interactive.pm:186
#, c-format
msgid "Resizing"
msgstr "Зміна розміру"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Обчислюю межі розділу FAT"

#: diskdrake/interactive.pm:694
#, c-format
msgid "This partition is not resizeable"
msgstr "Розмір цього розділу неможливо змінити"

#: diskdrake/interactive.pm:699
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Потрібно зробити резервну копію всіх даних на цьому розділі"

#: diskdrake/interactive.pm:701
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Після зміни розміру розділу %s всі дані на ньому буде втрачено"

#: diskdrake/interactive.pm:706
#, c-format
msgid "Choose the new size"
msgstr "Виберіть новий розмір"

#: diskdrake/interactive.pm:707
#, c-format
msgid "New size in MB: "
msgstr "Новий розмір в Мб: "

#: diskdrake/interactive.pm:751 install_interactive.pm:194
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Для забезпечення цілісності даних після зміни розміру \n"
"розділу(ів), при наступному завантаженні Windows(TM)\n"
"буде здійснено перевірку файлової системи"

#: diskdrake/interactive.pm:775
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "На який диск Ви хочете це перемістити?"

#: diskdrake/interactive.pm:776
#, c-format
msgid "Sector"
msgstr "Сектор"

#: diskdrake/interactive.pm:777
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "На який сектор Ви хочете його перемістити?"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving"
msgstr "Переміщення"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving partition..."
msgstr "Переміщаю розділ..."

#: diskdrake/interactive.pm:802
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Виберіть існуючий RAID, до якого додати"

#: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820
#, c-format
msgid "new"
msgstr "новий"

#: diskdrake/interactive.pm:818
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Виберіть існуючий LVM, до якого додати"

#: diskdrake/interactive.pm:824
#, c-format
msgid "LVM name?"
msgstr "Назва LVM?"

#: diskdrake/interactive.pm:861
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Цей розділ не може використовуватися для зворотнього монтування"

#: diskdrake/interactive.pm:874
#, c-format
msgid "Loopback"
msgstr "Зворотнє монтування"

#: diskdrake/interactive.pm:875
#, c-format
msgid "Loopback file name: "
msgstr "Назва файла зворотнього монтування: "

#: diskdrake/interactive.pm:880
#, c-format
msgid "Give a file name"
msgstr "Вкажіть назву файла"

#: diskdrake/interactive.pm:883
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""
"Файл вже використовується іншим пристроєм зворотнього монтування, виберіть "
"інший"

#: diskdrake/interactive.pm:884
#, c-format
msgid "File already exists. Use it?"
msgstr "Файл вже існує. Користуватися ним?"

#: diskdrake/interactive.pm:907
#, c-format
msgid "Mount options"
msgstr "Параметри монтування:"

#: diskdrake/interactive.pm:914
#, c-format
msgid "Various"
msgstr "Різноманітне"

#: diskdrake/interactive.pm:978
#, c-format
msgid "device"
msgstr "пристрій"

#: diskdrake/interactive.pm:979
#, c-format
msgid "level"
msgstr "рівень"

#: diskdrake/interactive.pm:980
#, c-format
msgid "chunk size"
msgstr "розмір ділянки"

#: diskdrake/interactive.pm:996
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Обережно: ця операція небезпечна."

#: diskdrake/interactive.pm:1011
#, c-format
msgid "What type of partitioning?"
msgstr "Який тип розбиття на розділи?"

#: diskdrake/interactive.pm:1027
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Необхідний пакунок %s. Встановити його?"

#: diskdrake/interactive.pm:1056
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Щоб зміни почали діяти, Вам слід перезавантажити комп'ютер"

#: diskdrake/interactive.pm:1065
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Таблицю розділів диску %s буде записано на диск!"

#: diskdrake/interactive.pm:1078
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Після форматування розділу %s всі дані на ньому будуть втрачені"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Move files to the new partition"
msgstr "Перемістити файли в новий розділ"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Hide files"
msgstr "Сховати файли"

#: diskdrake/interactive.pm:1096
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Тека %s вже містить дані\n"
"(%s)"

#: diskdrake/interactive.pm:1107
#, c-format
msgid "Moving files to the new partition"
msgstr "Переміщення файлів у новий розділ"

#: diskdrake/interactive.pm:1111
#, c-format
msgid "Copying %s"
msgstr "Копіювання %s"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Removing %s"
msgstr "Видалення %s"

#: diskdrake/interactive.pm:1129
#, c-format
msgid "partition %s is now known as %s"
msgstr "розділ %s відомий, як %s"

#: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210
#, c-format
msgid "Device: "
msgstr "Пристрій: "

#: diskdrake/interactive.pm:1151
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Літера диску в ДОСі: %s (припущення)\n"

#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Type: "
msgstr "Тип: "

#: diskdrake/interactive.pm:1159 install_steps_gtk.pm:339
#, c-format
msgid "Name: "
msgstr "Назва: "

#: diskdrake/interactive.pm:1167
#, c-format
msgid "Start: sector %s\n"
msgstr "Початок: сектор %s\n"

#: diskdrake/interactive.pm:1168
#, c-format
msgid "Size: %s"
msgstr "Розмір: %s"

#: diskdrake/interactive.pm:1170
#, c-format
msgid ", %s sectors"
msgstr ", %s секторів"

#: diskdrake/interactive.pm:1172
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Від циліндра %d до циліндра %d \n"

#: diskdrake/interactive.pm:1173
#, c-format
msgid "Number of logical extents: %d"
msgstr "Кількість логічних ступенів: %d"

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Formatted\n"
msgstr "Форматований\n"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Not formatted\n"
msgstr "Не форматований\n"

#: diskdrake/interactive.pm:1176
#, c-format
msgid "Mounted\n"
msgstr "Змонтований\n"

#: diskdrake/interactive.pm:1177
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: diskdrake/interactive.pm:1179
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Файл(и) зворотнього монтування: \n"
"  %s\n"

#: diskdrake/interactive.pm:1180
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Типовий розділ для завантаження системи\n"
"     (для завантаження ДОСу, не для lilo)\n"

#: diskdrake/interactive.pm:1182
#, c-format
msgid "Level %s\n"
msgstr "Рівень %s\n"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Chunk size %s\n"
msgstr "Розмір ділянки %s\n"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "RAID-disks %s\n"
msgstr "Диски RAID %s\n"

#: diskdrake/interactive.pm:1186
#, c-format
msgid "Loopback file name: %s"
msgstr "Назви файлів зворотнього монтування: %s"

#: diskdrake/interactive.pm:1189
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Можливо цей розділ є розділом\n"
"Driver, Вам мабуть не потрібно\n"
"його змінювати.\n"

#: diskdrake/interactive.pm:1192
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Це спеціальний розділ для \n"
"можливості подвійного \n"
"завантаження системи.\n"

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Read-only"
msgstr "Тільки для читання"

#: diskdrake/interactive.pm:1212
#, c-format
msgid "Size: %s\n"
msgstr "Розмір: %s\n"

#: diskdrake/interactive.pm:1213
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Геометрія: %s циліндрів, %s головок, %s секторів\n"

#: diskdrake/interactive.pm:1214
#, c-format
msgid "Info: "
msgstr "Інформація: "

#: diskdrake/interactive.pm:1215
#, c-format
msgid "LVM-disks %s\n"
msgstr "Диски LVM %s\n"

#: diskdrake/interactive.pm:1216
#, c-format
msgid "Partition table type: %s\n"
msgstr "Тип таблиці розділів: %s\n"

#: diskdrake/interactive.pm:1217
#, c-format
msgid "on channel %d id %d\n"
msgstr "на каналі %d id %d\n"

#: diskdrake/interactive.pm:1250
#, c-format
msgid "Filesystem encryption key"
msgstr "Ключ шифрування файлової системи"

#: diskdrake/interactive.pm:1251
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Виберіть ключ шифрування Вашої файлової системи"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Цей пароль занадто простий (він повинен бути хоча б %d літер завдовжки)"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "The encryption keys do not match"
msgstr "Ключі шифрування не співпадають"

#: diskdrake/interactive.pm:1258 network/netconnect.pm:972
#: standalone/drakconnect:393
#, c-format
msgid "Encryption key"
msgstr "Ключ шифрування"

#: diskdrake/interactive.pm:1259
#, c-format
msgid "Encryption key (again)"
msgstr "Ключ шифрування (знову)"

#: diskdrake/removable.pm:47
#, c-format
msgid "Change type"
msgstr "Змінити тип"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""
"Неможливо зареєструватися з іменем користувача %s (неправильний пароль?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Потрібна автентикація домена"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Яке ім'я користувача"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Ще один"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Будь-ласка, введіть своє ім'я користувача, пароль і назву домена, щоб "
"отримати доступ до цієї машини."

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3591
#, c-format
msgid "Username"
msgstr "Ім'я користувача"

#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Домен"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Пошук серверів"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Шукати нові сервери"

#: do_pkgs.pm:21
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Потрібно встановити пакунок %s. Ви хочете його встановити?"

#: do_pkgs.pm:26
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Обов'язковий пакунок %s відсутній"

#: do_pkgs.pm:143
#, c-format
msgid "Installing packages..."
msgstr "Встановлюються пакунки..."

#: do_pkgs.pm:217
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Видалення %s ..."

#: fs.pm:409
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Не поновлювати час доступу до інодів цієї файлової системи (напр., \n"
"для прискорення серверів новин і швидшого доступу до повідомлень)."

#: fs.pm:412
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Може бути змонтований тільки явно (тобто параметр -a\n"
"не монтує систему автоматично)."

#: fs.pm:415
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
"Не інтерпретувати символ або блокувати спеціальні пристрої у файловій "
"системі."

#: fs.pm:417
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Не дозволяти виконання бінарних файлів у змонтованій файловій системі.\n"
"Цей параметр може використовуватися для сервера, який має файлову\n"
"систему, який містить бінарні файли для іншої архітектури."

#: fs.pm:421
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"Не дозволяти встановлювати біти set-user-identifier, або set-group-"
"identifier.\n"
"(Вони здаються безпечними, але все змінюється після встановлення\n"
"suidperl(1))."

#: fs.pm:425
#, c-format
msgid "Mount the file system read-only."
msgstr "Монтувати файлову систему в режимі тільки читання."

#: fs.pm:427
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
"Всі операції вводу/виводу файлової системи повинні виконуватися синхронно."

#: fs.pm:431
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"Дозволяє звичайному користувачеві монтувати файлову систему.\n"
"Ім'я монтуючого користувача записується в mtab, тому він зможе\n"
"розмонтувати файлову систему. Цей параметр передбачає параметри\n"
"noexec, nosuid і nodev (якщо не брати до уваги такі параметри, як line\n"
"user,exec,dev,suid )."

#: fs.pm:439
#, c-format
msgid "Give write access to ordinary users"
msgstr "Дати доступ для запису звичайним користувачам"

#: fs.pm:441
#, fuzzy, c-format
msgid "Give read-only access to ordinary users"
msgstr "Дати доступ для запису звичайним користувачам"

#: fs.pm:580 fs.pm:590 fs.pm:594 fs.pm:598 fs.pm:602 fs.pm:606 swap.pm:12
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s форматування %s невдале"

#: fs.pm:647
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Я не знаю, як форматувати %s типу %s"

#: fs.pm:654 fs.pm:661
#, c-format
msgid "Formatting partition %s"
msgstr "Форматування розділу %s"

#: fs.pm:658
#, c-format
msgid "Creating and formatting file %s"
msgstr "Створюю та форматую файл %s"

#: fs.pm:718 fs.pm:771
#, c-format
msgid "Mounting partition %s"
msgstr "Монтування розділу %s"

#: fs.pm:719 fs.pm:772
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "монтування розділу %s в теку %s завершилося невдало"

#: fs.pm:739 fs.pm:747
#, c-format
msgid "Checking %s"
msgstr "Перевірка %s"

#: fs.pm:788 partition_table.pm:638
#, c-format
msgid "error unmounting %s: %s"
msgstr "помилка розмонтування %s: %s"

#: fs.pm:820
#, c-format
msgid "Enabling swap partition %s"
msgstr "Активізується swap-розділ %s"

#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr "простий"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "з /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "сервер"

#: fsedit.pm:254
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Не можу прочитати таблицю розділів на пристрої %s, вона занадто\n"
"зіпсована для мене :( Я спробую стерти зіпсовані розділи і ВСІ ДАНІ\n"
"будуть втрачені). Проблемі можна також запобігти, якщо заборонити DrakX\n"
"змінювати таблицю розділів. (помилка: %s)\n"
"\n"
"Ви погоджуєтесь втратити всі розділи?\n"

#: fsedit.pm:513
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "JFS не можна користуватися на розділах, менших за 16 Мб."

#: fsedit.pm:514
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Ви не можете використовувати ReiserFS на розділах, менших за 32Мб."

#: fsedit.pm:533
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Точка монтування повинна починатися з /"

#: fsedit.pm:534
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Точки монтування можуть містити тільки символи букв і цифр"

#: fsedit.pm:535
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Вже є розділ з точкою монтування %s\n"

#: fsedit.pm:537
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"В якості розділа для root (/) Ви вибрали програмний RAID.\n"
"Немає завантажувачів, які могли б працювати з такими розділами без /boot.\n"
"Тож, будь-ласка, не забудьте додати розділ /boot."

#: fsedit.pm:540
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Для точки монтування %s не можна користуватися логічним томом LVM"

#: fsedit.pm:542
#, fuzzy, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"В якості розділа для root (/) Ви вибрали програмний RAID.\n"
"Немає завантажувачів, які могли б працювати з такими розділами без /boot.\n"
"Тож, будь-ласка, не забудьте додати розділ /boot."

#: fsedit.pm:545
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""
"Можливо, Ви не зможете встановити lilo (оскільки lilo не підтримує LV на "
"множині PV)"

#: fsedit.pm:548 fsedit.pm:550
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Ця тека має залишитися в корені файлової системи"

#: fsedit.pm:552
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Для цієї точки монтування потрібна реальна файлова система (ext2/ext3,\n"
"reiserfs, xfs, or jfs)\n"

#: fsedit.pm:554
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
"Ви не можете використовувати зашифровану файлову систему для точки "
"монтування %s"

#: fsedit.pm:615
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Недостатньо вільного місця для автоматичного розподілу"

#: fsedit.pm:617
#, c-format
msgid "Nothing to do"
msgstr "Нічого виконувати"

#: fsedit.pm:713
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Помилка при відкриванні %s на запис: %s"

#: harddrake/data.pm:53
#, c-format
msgid "Floppy"
msgstr "Дискета"

#: harddrake/data.pm:54
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:55
#, c-format
msgid "Disk"
msgstr "Диск"

#: harddrake/data.pm:56
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:57
#, c-format
msgid "CD/DVD burners"
msgstr "Записувачі CD/DVD"

#: harddrake/data.pm:58
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:59 standalone/drakbackup:2116
#, c-format
msgid "Tape"
msgstr "Плівка"

#: harddrake/data.pm:60
#, c-format
msgid "Videocard"
msgstr "Відеокарта"

#: harddrake/data.pm:61
#, c-format
msgid "Tvcard"
msgstr "Телевізійна карта"

#: harddrake/data.pm:62
#, c-format
msgid "Other MultiMedia devices"
msgstr "Інші пристрої мультимедіа"

#: harddrake/data.pm:63
#, c-format
msgid "Soundcard"
msgstr "Звукова плата"

#: harddrake/data.pm:64
#, c-format
msgid "Webcam"
msgstr "Веб-камера"

#: harddrake/data.pm:68
#, c-format
msgid "Processors"
msgstr "Процесорів"

#: harddrake/data.pm:69
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Карта ISDN"

#: harddrake/data.pm:70
#, c-format
msgid "Ethernetcard"
msgstr "Плата Ethernet"

#: harddrake/data.pm:78 network/netconnect.pm:452 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:472
#: standalone/drakconnect:473 standalone/drakconnect:576
#, c-format
msgid "Modem"
msgstr "Модем"

#: harddrake/data.pm:79
#, c-format
msgid "ADSL adapters"
msgstr "Адаптери ADSL"

#: harddrake/data.pm:81
#, fuzzy, c-format
msgid "AGP controllers"
msgstr "Контролери USB"

#: harddrake/data.pm:82
#, c-format
msgid "Bridges and system controllers"
msgstr "Мости і системні контролери"

#: harddrake/data.pm:83 help.pm:203 help.pm:991
#: install_steps_interactive.pm:940 printer/printerdrake.pm:687
#: printer/printerdrake.pm:4175
#, c-format
msgid "Printer"
msgstr "Друкарка"

#: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:933
#, c-format
msgid "Mouse"
msgstr "Миша"

#: harddrake/data.pm:90
#, c-format
msgid "Joystick"
msgstr "Джойстік"

#: harddrake/data.pm:92
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Контролери (E)IDE/ATA"

#: harddrake/data.pm:94
#, c-format
msgid "Firewire controllers"
msgstr "Контролери Firewire"

#: harddrake/data.pm:95
#, c-format
msgid "SCSI controllers"
msgstr "Контролери SCSI"

#: harddrake/data.pm:96
#, c-format
msgid "USB controllers"
msgstr "Контролери USB"

#: harddrake/data.pm:97
#, c-format
msgid "SMBus controllers"
msgstr "Контролери SMBus"

#: harddrake/data.pm:98
#, c-format
msgid "Scanner"
msgstr "Сканер"

#: harddrake/data.pm:100 standalone/harddrake2:319
#, c-format
msgid "Unknown/Others"
msgstr "Невідомий/Інші"

#: harddrake/data.pm:114
#, c-format
msgid "cpu # "
msgstr "процесор # "

#: harddrake/sound.pm:150 standalone/drakconnect:169
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Зачекайте, будь ласка... Йде застосування конфіґурації"

#: harddrake/sound.pm:186
#, c-format
msgid "No alternative driver"
msgstr "Немає альтернативного драйвера"

#: harddrake/sound.pm:187
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Для Вашої звукової карти (%s), яка в даний момент використовує \"%s\", немає "
"альтернативного драйвера OSS/ALSA."

#: harddrake/sound.pm:193
#, c-format
msgid "Sound configuration"
msgstr "Конфіґурація звуку"

#: harddrake/sound.pm:195
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Тут Ви можете вибрати альтернативний дрейвер (або OSS, або ALSA) для Вашої "
"звукової карти (%s)."

#: harddrake/sound.pm:197
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Ваша картка зараз використуває драйвер %s\"%s\" (типовим драйвером для Вашої "
"картки є \"%s\")"

#: harddrake/sound.pm:199
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) була першою звуковою API. Це назалежний від "
"операційної системи API звуку (використовується на більшості юніксових "
"систем), але має дуже загальний і обмежений API.\n"
"Більше того, всі драйвери OSS видумують нове колесо.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) є архітектурою з модулями, яка\n"
"підтримує широкий спектр карт ISA, USB і PCI.\n"
"\n"
"Вона також надає API багато вищого рівня, ніж OSS.\n"
"\n"
"Використовуючи alsa, Ви можете мати:\n"
"- сумісність з старим api OSS\n"
"- новий api ALSA, який надає багато розширених можливостей, але вимагає "
"використання бібліотеки ALSA.\n"

#: harddrake/sound.pm:213 harddrake/sound.pm:293 standalone/drakups:134
#, c-format
msgid "Driver:"
msgstr "Драйвер:"

#: harddrake/sound.pm:218
#, c-format
msgid "Trouble shooting"
msgstr "Вирішення проблем"

#: harddrake/sound.pm:226
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Старий драйвер \"%s\" занесено в чорний список.\n"
"\n"
"Про нього створено звіт, щоб попередити ядро при вивантаженні.\n"
"\n"
"Новий драйвер \"%s\" буде використано тільки при наступному початковому\n"
"завантаженні."

#: harddrake/sound.pm:234
#, c-format
msgid "No open source driver"
msgstr "Немає драйвера з відкритим кодом"

#: harddrake/sound.pm:235
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Для вашої звукової карти (%s) немає безкоштовного драйвера, але є власний "
"драйвер на \"%s\"."

#: harddrake/sound.pm:238
#, c-format
msgid "No known driver"
msgstr "Немає відомого драйвера"

#: harddrake/sound.pm:239
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Немає відомого драйвера для Вашої звукової плати (%s)"

#: harddrake/sound.pm:243
#, c-format
msgid "Unknown driver"
msgstr "Невідомий"

#: harddrake/sound.pm:244
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Помилка: Драйвера \"%s\" для Вашої звукової карти немає в списку"

#: harddrake/sound.pm:257
#, c-format
msgid "Sound trouble shooting"
msgstr "Вирішення проблем зі звуком"

#: harddrake/sound.pm:258
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Класична програма тестування звуку виконується з наступними командами:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" повідомить Вам, який драйвер типово\n"
"використовує Ваша карта\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" повідомить Вам, який драйвер\n"
"використовується зараз\n"
"\n"
"- \"/sbin/lsmod\" зробить можливою перевірку, чи драйвер карти "
"завантажений,\n"
"чи ні\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" "
"повідомить\n"
"Вам, чи звук і служби alsa налаштовані для роботи в режимі\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" повідомить Вам, чи відключена гучність звуку\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" повідомить Вам, яка програма використовує "
"звукову\n"
"карту.\n"

#: harddrake/sound.pm:284
#, c-format
msgid "Let me pick any driver"
msgstr "Дозвольте мені підібрати драйвера"

#: harddrake/sound.pm:287
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Вибір довільного драйвера"

#: harddrake/sound.pm:288
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Якщо Ви справді вважаєте, що знаєте, який драйвер підходить для Вашоїкарти,\n"
"можете вибрати його із списку зверху.\n"
"\n"
"Теперішнім драйвером для Вашої звукової карти \"%s\" є \"%s\" "

#: harddrake/v4l.pm:14 harddrake/v4l.pm:66
#, c-format
msgid "Auto-detect"
msgstr "Користуватися автовизначенням"

#: harddrake/v4l.pm:67 harddrake/v4l.pm:219
#, c-format
msgid "Unknown|Generic"
msgstr "Невідомий|Загальний"

#: harddrake/v4l.pm:100
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Невідомий|CPH05X (bt878) [багато виробників]"

#: harddrake/v4l.pm:101
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Невідомий|CPH06X (bt878) [багато виробників]"

#: harddrake/v4l.pm:245
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Для найсучасніших TV-карт модуль bttv ядра GNU/Linux точно автовизначає "
"правильні параметри.\n"
"Якщо Вашу карту визначено неправильно, Ви можете вказати правильний тюнер і "
"тип карти тут. Просто виберіть параметри TV-карти, які потрібно."

#: harddrake/v4l.pm:248
#, c-format
msgid "Card model:"
msgstr "Модель карти:"

#: harddrake/v4l.pm:249
#, c-format
msgid "Tuner type:"
msgstr "Тип тюнера :"

#: harddrake/v4l.pm:250
#, c-format
msgid "Number of capture buffers:"
msgstr "Кількість буферів захоплення:"

#: harddrake/v4l.pm:250
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "кількість буферів для захоплення з допомогою mmap"

#: harddrake/v4l.pm:252
#, c-format
msgid "PLL setting:"
msgstr "встановлення PLL :"

#: harddrake/v4l.pm:253
#, c-format
msgid "Radio support:"
msgstr "Підтримка радіо:"

#: harddrake/v4l.pm:253
#, c-format
msgid "enable radio support"
msgstr "увімкнути підтримку радіо"

#: help.pm:11
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
"will reboot your computer."
msgstr ""
"Перш, ніж продовжувати, прочитайте уважно умови ліцензії. Вона\n"
"стосується всього диструбутиву Мандрейк Лінакс. Якщо Ви\n"
"погоджуєтесь з умовами ліцензії, помітьте \"%s\". Якщо ні,\n"
"то просто вимкніть комп'ютер."

#: help.pm:14 install_steps_gtk.pm:596 install_steps_interactive.pm:88
#: install_steps_interactive.pm:697 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "Прийняти"

#: help.pm:17
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user who\n"
"can automatically log into the system when the computer boots up. If you\n"
"are interested in that feature (and do not care much about local security),\n"
"choose the desired user and window manager, then click \"%s\". If you are\n"
"not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux - багатокористувацька система, це означає, що кожен з\n"
"користувачів може мати свої власні установки, власні файли, тощо. Щоб\n"
"більше дізнатися про це, Ви можете прочитати Підручник користувача з\n"
"системи. Але на відміну від користувача Root, який є адміністратором\n"
"системи, користувачі, яких Ви будете створювати на цьому кроці, не\n"
"мають права змінювати нічого в системі, крім своїх власних файлів і\n"
"власної конфіґурації. Ви маєте створити рахунок для хоча б одного\n"
"єдиного користувача - для самого себе. Ви будете користуватися цим\n"
"рахунком для того, щоб виконувати щоденні задачі. І хоча це і дуже\n"
"зручно реєструватись в системі як Root, але одночасно це і дуже\n"
"небезпечно! Найменша помилка може призвести до того, що система буде\n"
"неробочою. Якщо Ви помилитесь як звичайний користувач, Ви можете,\n"
"звичайно, втратити деякі свої дані, але не всю систему.\n"
"\n"
"Перше поле запитує Ваше справжнє ім'я. Звичайно ж, воно не обов'язкове,\n"
"Ви можете надрукувати все, що завгодно. DrakX візьме перше слово з цього\n"
"поля і скопіює його в поле \"%s\", яке є ім'ям користувача, під яким "
"користувач\n"
"буде реєструватись у системі. Якщо захочете, Ви можете змінити це ім'я. \n"
"Потім Вам потрібно ввести пароль. З міркувань безпеки системи пароль\n"
"звичайного (не root) користувача не є таким критичним, як пароль \n"
"адміністратора, але все-одно немає причин для того, щоб нехтувати ним,\n"
"залишаючи його порожнім або надто простим: врешті-решт, це загрожує\n"
"Вашим власним файлам. \n"
"\n"
"Після того, як Ви натиснете кнопку \"%s\", Ви можете додати ще багато \n"
"інших користувачів. Додайте користувача для кожного з Ваших друзів:\n"
"для тата й сестри, наприклад. Після того, як Ви закінчили додавати\n"
"користувачів, натисніть \"%s\".\n"
"\n"
"Натиснувши на кнопку \"%s\", Ви зможете змінити типову командну оболонку\n"
"для кожного користувача (типова оболонка - bash). \n"
"Коли Ви закінчите додавати користувачів, Вам буде запропоновано вибрати\n"
"користувача, який буде автоматично реєструватися в системі при стартуванні\n"
"комп'ютера. Якщо така можливість Вас цікавить (і не надто турбує про\n"
"локальну безпеку), виберіть користувача і менеджер вікон, тоді натисніть "
"на \n"
"\"%s\". Якщо Вас така можливість не цікавить, відмініть вибір \"%s\"."

#: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005
#: install_steps_gtk.pm:275 interactive.pm:403 interactive/newt.pm:308
#: network/netconnect.pm:262 network/tools.pm:206 printer/printerdrake.pm:3090
#: standalone/drakTermServ:408 standalone/drakbackup:4199
#: standalone/drakbackup:4229 standalone/drakbackup:4251 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Далі"

#: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr "Додатково"

#: help.pm:55
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Тут перелічені вже існуючі розділи, знайдені на Вашому твердому\n"
"диску. Ви можете залишити вибір, зроблений Помічником, він підходить\n"
"для більшості випадків встановлення. Якщо Ви робите якісь зміни, то "
"потрібно\n"
"як мінімум створити кореневу файлову систему (/). Не виділяйте\n"
"для цього занадто малий розділ, бо інакше Ви не зможете встановити\n"
"всі потрібні Вам програми. Якщо Ви бажаєте зберігати всі свої дані в\n"
"окремому розділі, потрібно буде також створити розділ \"/home\" (тільки у\n"
"випадку, якщо Ви маєте більше одного розділа для Лінакса). \n"
"\n"
"Кожен розділ показано в такому вигляді: \"Назва\", \"Розмір\".\n"
"\n"
"Назва розшифровується так: \"тип твердого диску\", \"номер твердого\n"
"диску\", \"номер розділу на диску\", (наприклад: \"hda1\").\n"
"\n"
"\"Тип твердого диску\" - це \"hd\", якщо Ви маєте диск типу IDE, і \"sd\",\n"
"якщо Ви маєте твердий диск типу SCSI.\n"
"\n"
"\"Номер твердого диску\" - це завжди літера після \"hd\" чи \"sd\". Для\n"
"дисків типу IDE це:\n"
"\n"
"    * \"a\" - головний диск (master) на першому контролері IDE,\n"
"\n"
"    * \"b\" - вторинний (slave) диск на першому контролері IDE,\n"
"\n"
"    * \"c\" - головний диск на другому контролері IDE,\n"
"\n"
"    * \"d\" - вторинний диск на другому контролері IDE.\n"
"\n"
"Для SCSI дисків \"a\" означає \"головний диск\", \"b\" - другорядний диск, "
"і\n"
"т.д. ..."

#: help.pm:86
#, fuzzy, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the correct CD as required."
msgstr ""
"Дистрибутив Мандрейк Лінакс розміщений на кількох компакт-дисках.\n"
"DrakX знає, коли вибрані пакунки знаходяться на інших компакт-\n"
"дисках, тоді він викине поточний компакт-диск і попросить вставити\n"
"потрібний."

#: help.pm:91
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrakelinux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrakelinux sorts packages groups in four categories. You can\n"
"mix and match applications from the various categories, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' category installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups that are in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Тепер час вибрати, які програми Ви хочете встановити в своїй\n"
"системі. Мандрейк Лінакс має тисячі програмних пакунків, і щоб спростити\n"
"керування ними, пакунки розміщено в групи подібних програм. \n"
"\n"
"Пакунки розсортовано в групи відповідно до способу використання Вашої\n"
"машини. Лінакс Мандрейк має чотири попередньо налаштовані типи\n"
"встановлення. Ви можете уявити ці типи встановлення як вмістилища\n"
"різних пакунків. Ви можете комбінувати і підбирати програми з різних\n"
"груп, і встановлення типу ``Робоча станція'' може мати програми із групи\n"
"пакунків ``Розробник''.\n"
"\n"
" * \"%s\": якщо Ви збираєтесь використовувати свою машину як робочу\n"
"станцію, виберіть одну чи більше програм з цієї групи.\n"
"\n"
" * \"%s\": якщо Ви збираєтесь використовувати цю машину для\n"
"програмування, виберіть відповідні пакунки з цієї групи, .\n"
"\n"
" * \"%s\": якщо машина призначається для використання в якості\n"
"сервера, виберіть додаткові сервіси, які Ви хочете встановити на своїй\n"
"машині.\n"
"\n"
" * \"%s\": тут Ви можете вибрати графічне середовище собі до вподоби.\n"
"Виберіть хоча б одне, якщо Ви хочете мати графічний інтерфейс.\n"
"\n"
"Пересування курсора над певним пунктом буде висвічувати текст із\n"
"коротким поясненням про групу. Якщо Ви забрали вибір усіх груп\n"
"під час підготовки звичайного встановлення (на відміну від поновлення),\n"
"появиться діалогове вікно з різними параметрами для мінімального\n"
"встановлення:\n"
"\n"
" * \"%s\":встановити найменшу можливу кількість пакунків, щоб мати\n"
"працюючу графічну стільницю.\n"
"\n"
" * \"%s\": встановлює основну систему плюс основні інструменти і їх\n"
"документацію. Цей спосіб використовується для встановлення сервера.\n"
"\n"
" * \"%s\": встановить абсолютно найменшу кількість пакунків, необхідних,\n"
"щоб отримати працюючу систему Лінакс. При цьому встановленні Ви\n"
"будете мати тільки інтерфейс командного рядка. Загальний розмір цього\n"
"встановлення становить біля 65 мегабайтів.\n"
"\n"
"Ви можете вибрати \"%s\", якщо впевнено орієнтуєтесь у пакунках,\n"
"які вам пропонуються, або якщо Ви хочете мати повний контроль над\n"
"тим, що встановлюється в системі.\n"
"\n"
"Якщо Ви почали установку в режимі \"%s\", Ви можете відмінити\n"
"вибір всіх груп, щоб уникнути встановлення нових пакунків. Це\n"
"використовується при відновленні або поновленні існуючої системи."

#: help.pm:137
#, c-format
msgid "Workstation"
msgstr "Робоча станція"

#: help.pm:137
#, c-format
msgid "Development"
msgstr "Розробка"

#: help.pm:137
#, c-format
msgid "Graphical Environment"
msgstr "Графічне середовище"

#: help.pm:137 install_steps_interactive.pm:559
#, c-format
msgid "With X"
msgstr "Разом з Х"

#: help.pm:137
#, c-format
msgid "With basic documentation"
msgstr "Із загальною документацією"

#: help.pm:137
#, c-format
msgid "Truly minimal install"
msgstr "Насправді мінімальне встановлення"

#: help.pm:137 install_steps_gtk.pm:270 install_steps_interactive.pm:605
#, c-format
msgid "Individual package selection"
msgstr "Індивідульний вибір пакунків"

#: help.pm:137 help.pm:602
#, c-format
msgid "Upgrade"
msgstr "Поновлення"

#: help.pm:140
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each them such\n"
"that installation of one package requires that some other program is also\n"
"required to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Якщо Ви вказали програмі встановлення, що хочете мати індивідуальний\n"
"вибір пакунків, Вам буде показано повне дерево пакунків, зібраних за\n"
"групами і підгрупами. Переглядаючи дерево, Ви зможете вибрати повні\n"
"групи, підгрупи та індивідуальні пакунки.\n"
"\n"
"Кожного разу, коли Ви вибираєте пакунок в дереві, справа з'являється\n"
"підказка про призначення пакунка.\n"
"\n"
"!! Якщо було вибрано серверний пакунок, чи то шляхом спеціального\n"
"вибору індивідуального пакунка, чи він є складовою частиною групи\n"
"пакунків, Вам буде задане запитання, чи Ви справді бажаєте встановити\n"
"ці сервери. В Лінакс Мандрейк всі встановлені сервери автоматично\n"
"запускаються при завантаженні системи. Навіть, якщо на час придбання\n"
"системи не було відомо жодних проблем з безпекою даних серверів,\n"
"можливо, що після встановлення системи такі проблеми буде виявлено.\n"
"Якщо Ви не знаєте призначення конкретного сервера або з якою метою\n"
"його встановлено, натисніть \"%s\". Якщо Ви натиснете \"%s\", буде\n"
"встановлено перелічені сервери і вони будуть стартувати автоматично під\n"
"час завантаження !!\n"
"\n"
"Параметр \"%s\" використовується, щоб заборонити діалог попередження,\n"
"який появляється, як тільки програма встановлення автоматично вибирає\n"
"пакунки для задоволення залежностей. Деякі пакунки мають відношення\n"
"до інших так, що встановлення пакунка вимагає, щоб інші програми також були\n"
"встановлені. Програма встановлення може визначити, які пакунки необхідні\n"
"для задоволення залежностей, щоб успішно завершити встановлення.\n"
"\n"
"Маленька піктограма дискети внизу списка дозволяє завантажити з дискети\n"
"список, створений при попередньому встановленні. Це зручно використовувати,\n"
"якщо є певна кількість машин, що мають бути сконфігуровані однаково.\n"
"Після натискання цієї кнопки, система попросить Вас вставити попередньо\n"
"створену дискету в кінці іншого встановлення. Перегляньте другу пораду\n"
"останнього кроку про те, як створити таку дискету."

#: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:420
#: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:219
#: ugtk2.pm:1074 wizards.pm:156
#, c-format
msgid "No"
msgstr "Ні"

#: help.pm:172 help.pm:301 help.pm:457 install_any.pm:420 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:607 standalone/drakgw:288
#: standalone/drakgw:289 standalone/drakgw:297 standalone/drakgw:307
#: standalone/harddrake2:218 ugtk2.pm:1074 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Так"

#: help.pm:172
#, c-format
msgid "Automatic dependencies"
msgstr "Автоматичні залежності"

#: help.pm:175
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrakelinux will attempt to auto-detect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"About Winmodem Connection. Winmodems are special integrated low-end modems\n"
"that require additional software to work compared to Normal modems. Some of\n"
"those modems actually work under Mandrakelinux, some others do not. You\n"
"can consult the list of supported modems at LinModems.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Зараз Ви встановите з'єднання інтернет/мережа. Якщо Ви хочете з'єднати\n"
"свій комп'ютер з інтернетом або з місцевою мережею, натисніть \"%s\".\n"
"Лінакс Мандрейк спробує автоматично визначити мережеві пристрої\n"
"і модеми. Якщо це автовизначення завершується невдало, зніміть вибір\n"
"\"%s\". Також Ви можете вибрати не налаштовувати мережу, або зробити\n"
"це пізніше, в цьому випадку, натиснувши \"%s\", Ви перейдете до наступного\n"
"кроку.\n"
"\n"
"При налаштуванні мережі можливими параметрами з'єднання є:\n"
"звичайний модем, модем ISDN, з'єднання ADSL, кабель-модем і просте\n"
"LAN-з'єднання (Ethernet).\n"
"\n"
"Ми не будемо конкретизувати кожен параметр - просто переконайтеся,\n"
"що Ви маєте всі параметри, такі, як IP-адреса, шлюз, DNS-сервери і т.і.\n"
"від провайдера інтернет або системного адміністратора.\n"
"\n"
"Ви можете звернутися до розділу ``Starter Guide'' про з'єднання з інтернет\n"
"за детальною інформацією про конфігурацію, чи просто\n"
"зачекайте, поки система встановиться і скористайтесь програмою,\n"
"описаною там для встановлення конфіґурації з'єднання тенет."

#: help.pm:197
#, c-format
msgid "Use auto detection"
msgstr "Користуватися автовизначенням"

#: help.pm:200
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
"\"%s\": натиснення кнопки \"%s\" запускає Помічника налаштування\n"
"друкарки. Зверніться до відповідного розділу ``Starter Guide'' для "
"додаткової\n"
"інформації про встановлення нової друкарки. Показаний там інтерфейс\n"
"подібний до того, що використовується при встановленні."

#: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:646
#: standalone/drakbackup:2406 standalone/drakbackup:2414
#: standalone/drakbackup:2422 standalone/drakbackup:2430
#, c-format
msgid "Configure"
msgstr "Налаштувати"

#: help.pm:206
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Цей діалог використовується, щоб вибрати, які сервіси будуть запускатися\n"
"автоматично при старті системи. \n"
"\n"
"DrakX надасть список всіх служб, можливих при цьому встановленні.\n"
"Перегляньте уважно ці служби і відмініть вибір тих, які не повинні\n"
"запускатися при старті системи.\n"
"\n"
"При виборі служби появляється короткий текст з поясненням про неї.\n"
"Проте, якщо Ви не впевнені, чи потрібно використовувати якусь службу,\n"
"залишіть запропонований вибір.\n"
"\n"
"!! Будьте особливо уважними, якщо Ви збираєтесь використовувати цю\n"
"систему як сервер: можливо, не потрібно стартувати служби, які Вам\n"
"не потрібні. Пам'ятайте, будь-ласка, що деякі увімкнені служби можуть\n"
"бути небезпечними на сервері. Одним словом, вибирайте тільки ті служби,\n"
"які Вам дійсно необхідні.\n"
"!!"

#: help.pm:224
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can be used by\n"
"other machines on your local network as well."
msgstr ""
"GNU/Linux оперує часом по GMT (середній час по Ґрінвічу) і переводить його\n"
"в місцевий час відповідно до часового поясу, який Ви вказали. Якщо годинник\n"
"на Вашій материнській платі встановлено в локальний час, Ви можете "
"відмінити\n"
"\"%s\",що дасть змогу GNU/Linux знати, що системний годинник і апаратний\n"
"годинник встановлені на один часовий пояс. Це використовується, коли машина\n"
"також може завантажуватися в іншу операційну систему, напр. Віндовс.\n"
"\n"
"Параметр \"%s\" автоматично наводить годинник шляхом під'єднання до\n"
"віддаленого серверу часу в Інтернеті. Щоб ця можливість працювала, Ви\n"
"повинні мати працююче з'єднання з Інтернетом. Найкраще вибрати сервер\n"
"часу, розташований біля Вас. Цей параметр встановлює сервер часу, який\n"
"також може використовуватися іншими машинами у Вашій місцевій мережі."

#: help.pm:235 install_steps_interactive.pm:835
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Годинник встановлено в GMT"

#: help.pm:235
#, c-format
msgid "Automatic time synchronization"
msgstr "Автоматична синхронізація часу"

#: help.pm:238
#, fuzzy, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs."
msgstr ""
"Графічна карта\n"
"\n"
"   Програма встановлення в нормальному режимі автоматично знаходить\n"
"і налаштовує графічну карту, встановлену на Вашій машині. Якщо цього не\n"
"відбувається, Ви можете вибрати із списку карту, яку Ви встановили.\n"
"\n"
"   У випадку, якщо Ваша карта підтримує різні сервери з або без\n"
"3D-прискорення, Вам буде надана можливість вибрати сервер, який найбільше\n"
"Вам підходить."

#: help.pm:249
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (для системи X Window) є серцем графічного інтерфейсу GNU/Linux,\n"
"від якого залежать всі графічні середовища (KDE, GNOME, AfterStep,\n"
"WindowMaker, і т.і.), пов'язані з Mandrakelinux.\n"
"\n"
"Вам буде представлено список різних параметрів для налаштування,\n"
"щоб отримати оптимальний графічний дисплей: графічна карта\n"
"\n"
"   Програма встановлення автоматично визначає і налаштовує графічну\n"
"карту, встановлену в машину. Якщо вона визначена неправильно, Ви можете\n"
"вибрати із списку карту, яка дійсно встановлена.\n"
"\n"
"   У випадку, якщо Ваша карта підтримує різні сервери з або без 3D\n"
"прискоренням, буде запропоновано вибрати сервер, який Вам найбільше\n"
"підходить.\n"
"\n"
"\n"
"\n"
"Монітор\n"
"\n"
"   Програма встановлення автоматично визначає і налаштовує монітор,\n"
"під'єднаний до Вашої машини. Якщо це зроблено неправильно, Ви можете\n"
"вибрати із списку монітор, який дійсно під'єднано до Вашого комп'ютера.\n"
"\n"
"\n"
"\n"
"Роздільна здатність\n"
"\n"
"   Тут Ви можете вибрати роздільну здатність і кількість кольорів, які\n"
"підтримує Ваше обладнання. Підберіть величини, які найбільше Вас\n"
"влаштовують (Ви матимите змогу їх змінити пізніше). Зразок вибраного\n"
"налаштування буде показано на моніторі.\n"
"\n"
"\n"
"\n"
"Тест\n"
"\n"
"   система спробує відкрити графічний екран з вибраною роздільністю.\n"
"Якщо Ви зможете побачити повідомлення під час тесту і відповісте \"%s\",\n"
"DrakX перейде до наступного кроку. Якщо Ви не зможете бачити\n"
"повідомлення, це означатиме, що певна частина автоматично визначеної\n"
"конфігурації неправильна, тест автоматично завершиться через 12 секунд\n"
"і Ви повернетесь назад в меню. Змінюйте налаштування, поки не отримаєте\n"
"коректний графічний дисплей.\n"
"\n"
"\n"
"\n"
"Параметри\n"
"\n"
"   Тут Ви можете вибрати, чи хочете Ви, щоб Ваша машина автоматично\n"
"перемикалася в графічний інтерфейс при завантаженні. Зрозуміло, що Ви\n"
"захочете вибрати \"%s\", якщо Ваша машина є сервером, або якщо Ви не\n"
"змогли успішно налаштувати дисплей."

#: help.pm:304
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""
"Монітор\n"
"\n"
"   Програма встановлення звичайно автоматично виявляє і налаштовує монітор,\n"
"під'єднаний до Вашої машини. Якщо вона це зробила неправильно, Ви можете\n"
"вибрати правильний монітор з цього списку."

#: help.pm:311
#, fuzzy, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Роздільна здатність\n"
"\n"
"   Тут Ви можете вибрати роздільну здатність і глибину кольору.\n"
"Виберіть величини, які Вас найбільше влаштовують (Ви зможете\n"
"їх змінити після встановлення). Зразок вибраного налаштування\n"
"буде показано на моніторі."

#: help.pm:319
#, fuzzy, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you are asked to choose the server that best\n"
"suits your needs."
msgstr ""
"У випадку, якщо Ваша карта підтримує різні сервери з або без 3D\n"
"прискоренням, Вам буде запропоновано вибрати сервер, який Вам\n"
"найбільше підходить."

#: help.pm:324
#, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"Параметри\n"
"\n"
"   Тут можна вказати, чи хочете Ви, щоб графічний інтерфейс вмикався\n"
"автоматично при завантаженні системи. Вам потрібно вибрати \"%s\", якщо\n"
"Ваша машина буде працювати сервером, або якщо Ви не змогли успішно\n"
"налаштувати X."

#: help.pm:332
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you have previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended.. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Тепер потрібно вирішити, де саме Ви б хотіли встановити систему\n"
"Мандрейк Лінакс на твердому диску. Якщо твердий диск порожній, або\n"
"якщо існуюча операційна система використовує весь простір, Вам потрібно\n"
"буде перерозподілити диск. Фактично перерозподіл твердого диску полягає\n"
"в логічному його розділенні, щоб створити місце для встановлення Мандрейк\n"
"Лінакса.\n"
"\n"
"Через те, що процес перерозбиття твердого диску звичайно є незворотнім і\n"
"може призвести до втрати даних, якщо іншу операційну систему вже\n"
"було встановлено, ця операція може бути відлякуючою і стресовою, якщо\n"
"Ви є недосвідченим користувачем. На щастя, DrakX має помічника, який\n"
"спрощує цей процес. Перед продовженням цього кроку прочитайте до кінця\n"
"цього розділу і, що головне, приділіть трохи часу.\n"
"\n"
"В залежності від конфігурації Вашого твердого диску можливі кілька "
"варіантів\n"
"продовження:\n"
"\n"
" * \"%s\": цей режим виконує автоматичне розбиття на розділи Вашого\n"
"порожного диску (дисків). Якщо Ви вибрали цю команду, інших запитань\n"
"до Вас вже не буде.\n"
"\n"
" * \"%s\": Помічник виявив один або більше розділів Лінакс на Вашому\n"
"твердому диску. Якщо Ви хочете використати їх, виберіть цей режим.\n"
"Тоді Вам буде запропоновано вказати відповідні до кожного розділу точки\n"
"монтування. Попередні точки монтування будуть показані типово і у\n"
"більшості випадків залишити їх без змін буде прийнятним варіантом.\n"
"\n"
" * \"%s\": якщо на Вашому твердому диску встановлено Microsoft Windows\n"
"і він займає весь простір на ньому, Вам потрібно буде створити вільне\n"
"місце для Лінакса. Щоб зробити це, Ви можете стерти всі розділи Microsoft\n"
"Windows і дані (дивись команду ``Стерти весь диск''), або змінити розмір\n"
"розділу Microsoft Windows FAT. Зміна розміру буде здійснена без втрати\n"
"будь-яких даних, які знаходяться на попередньо дефрагментованому розділі\n"
"Windows формату FAT. Дуже рекомендується зробити резервну копію\n"
"Ваших даних. Використання цього режиму рекомендується, якщо Ви хочете\n"
"використовувати Лінакс Мандрейк і Майкрософт Віндовс на одному комп'ютері.\n"
"\n"
"   Перед вибором цього режиму зрозумійте, що після виконання цієї процедури\n"
"розмір розділу Microsoft Windows стане меншим, ніж до цього. Ви будете мати\n"
"менше вільного місця у Microsoft Windows на зберігання даних і встановлення\n"
"нових програм.\n"
"\n"
" * \"%s\": якщо Ви хочете стерти всі дані і всі розділи, які є на твердому\n"
"диску і замінити їх новою системою Мандрейк Лінакс,\n"
"виберіть цей режим. Будьте уважні, бо підтвердивши цей\n"
"вибір, Ви вже не зможете повернутись назад.\n"
"\n"
"   !! Якщо Ви виберете цей режим, всі дані на твердому диску будуть "
"видалені. !!\n"
"\n"
" * \"%s\": це просто зітре повністю весь диск і почне свіжий\n"
"поділ на розділи. Всі дані на диску буде втрачено.\n"
"\n"
"!! Якщо Ви виберете цей режим, всі дані на диску будуть втрачені. !!\n"
"\n"
" * \"%s\": виберіть цей режим, якщо Ви хочете вручну перерозподілити\n"
"простір на Вашому твердому диску. Однак будьте обережними, це --\n"
"потужний, але дуже небезпечний вибір, Ви можете дуже легко втратити\n"
"всі дані. Тому цей режим насправді рекомендується тоді, якщо Ви вже\n"
"щось подібне робили або маєте певний досвід. Для детальнішої інформації,\n"
"як використовувати інструмент DiskDrake, звертайтеся до розділу\n"
"``Managing Your Partitions '' в ``Starter Guide''."

#: help.pm:389 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Використовувати вільний простір"

#: help.pm:389
#, c-format
msgid "Use existing partition"
msgstr "Використовувати існуючий розділ"

#: help.pm:389 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Використовувати вільний простір на розділі Windows"

#: help.pm:389 install_interactive.pm:211
#, c-format
msgid "Erase entire disk"
msgstr "Стерти весь диск"

#: help.pm:389
#, c-format
msgid "Remove Windows"
msgstr "Видалити Віндовс"

#: help.pm:389 install_interactive.pm:226
#, c-format
msgid "Custom disk partitioning"
msgstr "Спеціальний розподіл диску"

#: help.pm:392
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. Don't forget to\n"
"remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\": saves a list of the packages selected in this installation. To\n"
"use this selection with another installation, insert the floppy and start\n"
"the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<."
msgstr ""
"Ось і все. Встановлення завершене і Ваша система GNU/Linux готова\n"
"до використання. Просто натисніть \"%s\" для перезавантаження.\n"
"Перше, що Ви побачите після завершення системою тестів обладнання,\n"
"буде меню завантажувача, яке дасть Вам вибір операційної системи для\n"
"запуску.\n"
"\n"
"Кнопка \"%s\"покаже дві інші кнопки для:\n"
"\n"
" * \"%s\": для створення дискети для встановлення, яка автоматично без "
"допомоги\n"
"оператора виконає все встановлення, подібне до того, яке Ви щойно зробили.\n"
"\n"
"   Зауважте, що після натиснення на кнопку будуть можливі два різні "
"параметри:\n"
"\n"
"    * \"%s\". Це частково автоматизоване встановлення. Етап розбиття на "
"розділи\n"
"є тільки діалоговою процедурою.\n"
"\n"
"    * \"%s\". Повністю автоматизоване встановлення: твердий диск повністю\n"
"перезаписується, всі дані втрачаються.\n"
"\n"
"   Цей параметр є дуже зручним при встановленні на багато подібних машин.\n"
"Дивіться розділ Auto install на нашому веб-сайті для детальної інформації.\n"
"\n"
" * \"%s\"(*): зберігає список пакунків, вибраних при цьому встановленні.\n"
"Щоб використати цей вибір при іншому встановленні, вставте дискету і\n"
"запустіть встановлення. При підказці натисніть клавішу [F1] і введіть "
">>linux\n"
"defcfg=\"floppy\" <<.\n"
"\n"
"(*) Вам потрібно мати дискету у форматі FAT (щоб створити таку в GNU/Linux\n"
"введіть \"mformat a:\")"

#: help.pm:418
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "створити дискету автовстановлення"

#: help.pm:418 install_steps_interactive.pm:1329
#, c-format
msgid "Replay"
msgstr "Повторити"

#: help.pm:418 install_steps_interactive.pm:1329
#, c-format
msgid "Automated"
msgstr "Автоматизована"

#: help.pm:418 install_steps_interactive.pm:1332
#, c-format
msgid "Save packages selection"
msgstr "Зберегти вибір пакунків"

#: help.pm:421
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Будь-який з нових створених розділів має бути відформатований, щоб\n"
"міг використовуватися (форматування означає створення файлової\n"
"системи).\n"
"\n"
"Зараз Ви, можливо, захочете переформатувати деякі з вже існуючих\n"
"розділів для того, щоб стерти дані, які на них записані. Якщо Ви\n"
"хочете це зробити, виберіть також розділи, які хочете\n"
"відформатувати.\n"
"\n"
"Зауважте, однак, що не обов'язково форматувати всі розділи, які\n"
"існували раніше. Ви повинні відформатувати розділи, які містять\n"
"операційну систему (такі, як \"/\", \"/usr\" чи \"/var\"), але не мусите\n"
"форматувати ті розділи, які містять дані, які Ви б хотіли зберегти\n"
"(типово це розділ \"/home\").\n"
"\n"
"Будьте уважні з вибором розділів. Після форматування всі дані на\n"
"вибраних розділах будуть стерті і їх вже не можна буде відновити.\n"
"\n"
"Натисніть на \"%s\", коли будете готові приступити до форматування\n"
"розділів.\n"
"\n"
"Натисніть на \"%s\", якщо Ви хочете вибрати інші розділи для\n"
"того, щоб встановити нову систему Мандрейк Лінакс.\n"
"\n"
"Натисніть на \"%s\", якщо Ви хочете вибрати розділи для\n"
"перевірки на існування збійних блоків."

#: help.pm:444 help.pm:1005 install_steps_gtk.pm:431 interactive.pm:404
#: interactive/newt.pm:307 printer/printerdrake.pm:3088
#: standalone/drakTermServ:387 standalone/drakbackup:4012
#: standalone/drakbackup:4041 standalone/drakbackup:4095
#: standalone/drakbackup:4119 standalone/drakbackup:4143
#: standalone/drakbackup:4195 standalone/drakbackup:4225
#: standalone/drakbackup:4247 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "Попередній"

#: help.pm:447
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrakelinux, it is likely that some\n"
"packages will have been updated since the initial release. Bugs may have\n"
"been fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one near to you. A package-selection tree will\n"
"appear: review the selection, and press \"%s\" to retrieve and install the\n"
"selected package(s), or \"%s\" to abort."
msgstr ""
"Коли Ви встановлююєте Mandrakelinux, деякі пакунки можуть\n"
"мати поновлення з часу виходу дистрибутиву. Можуть бути виправлені\n"
"помилки, вирішені питання безпеки. Щоб мати користь від цих поновлень,\n"
"зараз Ви можете звантажити їх з інтернету. Перевірте \"%s\", якщо маєте\n"
"зв'язок з інтернетом, або \"%s\", якщо бажаєте встановити поновлені ракунки\n"
"пізніше.\n"
"\n"
"Вибравши \"%s\", Ви побачите список адрес, звідки можуть бути доставлені\n"
"поновлення. Вам потрібно вибрати якісь із найближчих до Вас. Появиться\n"
"дерево вибору пакунків: зробіть вибір і натисніть \"%s\", щоб доставити\n"
"і встановити їх, або \"%s\", щоб вийти."

#: help.pm:457 help.pm:602 install_steps_gtk.pm:430
#: install_steps_interactive.pm:148 standalone/drakbackup:4279
#, c-format
msgid "Install"
msgstr "Встановлення"

#: help.pm:460
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option. You will\n"
"be able to change that security level later with tool draksec from the\n"
"Mandrake Control Center.\n"
"\n"
"The \"%s\" field can inform the system of the user on this computer who\n"
"will be responsible for security. Security messages will be sent to that\n"
"address."
msgstr ""
"В цьому місці DrakX дасть Вам можливість вибрати рівень безпеки\n"
"для Вашої системи. На практиці можна використовувати таке правило:\n"
"рівень безпеки повинен бути вищий, якщо на машині зберігатимуться\n"
"важливі дані, або якщо вона буде безпосередньо під'єднана до інтернету.\n"
"Платою за вищий рівень безпеки у більшості випадків є легкість у\n"
"використанні.\n"
"\n"
"Якщо Ви не знаєте, на чому зупинитись, залиште все, як є."

#: help.pm:472
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "Адміністротар з безпеки:"

#: help.pm:475
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Зараз Вам потрібно вибрати, які розділи використовувати для встановлення\n"
"Вашої нової системи Лінакс Мандрейк. Якщо ці розділи вже були створені\n"
"при попередньому встановленні системи GNU/Linux, або створені іншою\n"
"програмою розподілу диску, Ви можете скористатися вже існуючими\n"
"розділами. В іншому випадку потрібно створити розділи на твердому диску.\n"
"\n"
"Щоб створити розділи, Вам потрібно вибрати твердий диск. Ви можете\n"
"вибрати диск, клацнувши на \"hda\" для першого диску типу IDE,\n"
"\"hdb\" для другого диску типу IDE, \"sda\", якщо Ви будете встановлювати\n"
"систему на першому диску типу SCSI і так далі.\n"
"\n"
"Щоб розбити диск на розділи, Ви можете скористатися такими командами:\n"
"\n"
" * \"%s\": видаляє всі розділи на вибраному твердому диску\n"
"\n"
" * \"%s\": ця команда автоматично створить розділи типу ext3 та swap\n"
"на вільному місці диску\n"
"\n"
"\"%s\": дає доступ до додаткових параметрів:\n"
"\n"
" * \"%s\": записує таблицю розділів на дискету. Використовується для\n"
"відновлення таблиці розділів при потребі. Дуже рекомендується виконувати\n"
"цей крок.\n"
"\n"
" * \"%s\": дає змогу Вам відновити раніше записану таблицю розділів з\n"
"дискети.\n"
"\n"
" * \"%s\": якщо таблиця розділів Вашого диску пошкоджена, Ви можете\n"
"спробувати відновити її, скориставшись цією командою. Будь-ласка,\n"
"будьте-обережними і пам'ятайте, що ця команда не завжди спрацьовує.\n"
"\n"
" * \"%s\": відмовитися від всіх змін і завантажити таблицю розділів, яка\n"
"була на Вашому твердому диску.\n"
"\n"
" * \"%s\": відміна цього параметра зробить необхідним монтування і\n"
"розмонтування знімних носіїв - дискети і компакт-диску - користувачами\n"
"вручну.\n"
"\n"
" * \"%s\": використайте цю команду, якщо Ви хочете, щоб помічник розподілив\n"
"Ваш диск. Рекомендується, якщо Ви не розумієтесь добре про\n"
"розподіл диску. \n"
"\n"
" * \"%s\": використайте цю команду, щоб скасувати всі зміни.\n"
"\n"
" * \"%s\": дозволити додаткові дії при розбиванні (тип, параметри, формат)\n"
"і отримати більше інформації про твердий диск.\n"
"\n"
" * \"%s\": ця команда запише зміни на диск після того, як Ви закінчите "
"розбиття\n"
"Вашого твердого диску. \n"
"\n"
"Коли Ви задаєте розмір розділу, можете точніше задати розмір,\n"
"використовуючи клавіші курсора на клавіатурі.\n"
"\n"
"Примітка: Ви можете виконати будь-яку команду з клавіатури. Переміщайтеся\n"
"по розділах здопомогою клавіш [Tab] і [Up/Down].\n"
"\n"
"Коли певний розділ вибрано, Ви можете використовувати:\n"
"\n"
" * Ctrl-c, щоб створити новий розділ (якщо вибрано порожній розділ)\n"
"\n"
" * Ctrl-d, щоб стерти розділ\n"
"\n"
" * Ctrl-m, щоб встановити точку монтування\n"
"\n"
"Щоб отримати інформацію про різні типи файлових систем, які Ви можете\n"
"створити, прочитайте розділ ext2FS з ``Reference Manual''.\n"
"\n"
"Якщо Ви встановлюєте систему на комп'ютер з процесором PPC, можете\n"
"створити маленький розділ типу HFS для завантаження 'bootstrap'\n"
"(розміром не менше 1Мб) для завантажувача yaboot. Якщо Ви вирішите\n"
"створити розділ трохи більшого розміру, скажімо 50Мб, Ви зможете\n"
"також зберігати на ньому резервне ядро системи та віртуальний диск для\n"
"аварійних завантажень системи. "

#: help.pm:544
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "Автоматичне монтування змінних носіїв"

#: help.pm:544
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Перемикнути між режимами Експерт/Звичайний"

#: help.pm:547
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"На Вашому диску знайдено більше одного розділа Майкрософт.\n"
"Виберіть, будь-ласка, розмір якого з них Ви хотіли б змінити, для\n"
"того, щоб встановити операційну систем Мандрейк Лінакс.\n"
"\n"
"Кожен розділ подано в такому вигляді: \"Назва в Лінаксі\", \"Назва у\n"
"Віндовс\", \"Розмір\".\n"
"\n"
"\"Назва в Лінаксі\" подана таким чином: \"тип твердого диску\",\n"
"\"номер твердого диску\", \"номер розділу на диску\", (наприклад:\n"
"\"hda1\").\n"
"\n"
"Тип твердого диску\" - це \"hd\", якщо Ви маєте диск типу IDE, і \"sd\",\n"
"якщо Ви маєте твердий диск типу SCSI.\n"
"\n"
"\"Номер твердого диску\" - це завжди літера після \"hd\" чи \"sd\". Для\n"
"дисків типу IDE це:\n"
"\n"
"    * \"a\" - головний диск (master) на першому контролері IDE,\n"
"\n"
"    * \"b\" - вторинний (slave) диск на першому контролері IDE,\n"
"\n"
"    * \"c\" - головний диск на другому контролері IDE,\n"
"\n"
"    * \"d\" - вторинний диск на другому контролері IDE.\n"
"\n"
"Для SCSI дисків \"a\" означає \"головний диск\", \"b\" - другорядний диск, "
"і\n"
"т.д. ...\n"
"\n"
"\"Назва у Віндовс\" - це літера Вашого твердого диску, як Ви її бачите\n"
"при роботі у Віндовс (перший диск чи розділ називається \"C:\")."

#: help.pm:578
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
"\"%s\": перевірити поточний вибір країни. Якщо Ви знаходитесь не\n"
"в цій країні, натисніть кнопку \"%s\" і виберіть іншу країну. Якщо Вашої "
"країни\n"
"не показано в першому переліку, натисніть \"%s\", щоб отримати повний\n"
"список країн."

#: help.pm:584
#, fuzzy, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
"Цей крок виконується тільки у випадку, якщо на Вашій машині було\n"
"знайдено старий розділ GNU/Linux.\n"
"\n"
"DrakX зараз потрібно знати, чи Ви хочете виконати нове встановлення,\n"
"чи поновити існуючу систему Лінакс Мандрейк:\n"
"\n"
" * \"%s\": В більшій частині це повністю знищує стару систему. Якщо Ви\n"
"хочете змінити розбиття твердого диску на розділи або змінити файлову\n"
"систему, використовуйте цей параметр. Проте в залежності від схеми\n"
"розбиття на розділи Ви можете оберегти деякі з існуючих даних від\n"
"переписування.\n"
"\n"
" * \"%s\": цей тип встановлення дозволяє Вам поновити пакунки, вже\n"
"встановлені на Вашій системі Mandrakelinux. Ваша існуюча схема\n"
"розбиття на розділи і дані користувачів не змінюються. Більшість інших\n"
"кроків встановлення залишаються, подібно до стандартного встановлення.\n"
"\n"
"Використання параметра ``Поновлення'' працюватиме на системах з Mandrake\n"
"Linux версіїі \"8.1\" і пізніших. Виконання поновлення версій, попередніх "
"до\n"
"Mandrakelinux \"8.1\" не рекомендується."

#: help.pm:605
#, fuzzy, c-format
msgid ""
"Depending on the language you chose in section , DrakX will automatically\n"
"select a particular type of keyboard configuration. Check that the\n"
"selection suits you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard that corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"В залежності від типової мови, яку Ви вказали у Секції, drakX автоматично\n"
"вибере певний тип конфігурації клавіатури. Проте, може не існувати\n"
"мапи клавіатури, що точно відповідає Вашій мові: наприклад, якщо Ви\n"
"англомовний швейцарець, Ви все-одно можете забажати користуватись\n"
"швейцарською мапою. Або, якщо Ви говорите англійською, але живете в "
"Квебеку,\n"
"Ви потрапляєте в аналоґічну ситуацію, коли Ваша рідна мова і мапа "
"клавіатури\n"
"не співпадають. В таких випадках цей крок встановлення дасть Вам змогу\n"
"вибрати відповідну клавіатуру з наданого списку.\n"
"\n"
"Натисніть кнопку \"%s\", щоб побачити повний список мап клавіатур.\n"
"\n"
"Якщо Ви вибрали мапу, що основана на нелатинському алфавіті, наступний\n"
"діалог дасть змогу вибрати комбінацію клавіш, яка перемикатиме клавіатуру\n"
"між латинською і нелатинською мапами."

#: help.pm:624
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. Though full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux will be using it\n"
"or not depending on the user choices:\n"
"\n"
" * If you choose a languages with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for the system at user request by\n"
"selecting option \"%s\" independently of which language(s) have been\n"
"chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will also be installed.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Ваш вибір мови вплине на мову документації, програми встановлення\n"
"і систему в цілому. Спочатку виберіть регіон, в якому Ви знаходитесь,\n"
"потім мову, якою Ви розмовляєте.\n"
"\n"
"Натиснувши кнопку \"%s\" Ви зможете вибрати інші мови, які можна\n"
"встановити на Вашій робочій станції, при цьому встановлюються особливі\n"
"для мови файли системної документації і програми. Наприклад, якщо\n"
"в системі будуть працювати користувачі з Іспанії, виберіть англійську\n"
"мову типовою з дерева перегляду і \"%s\" в розділі Додатково.\n"
"\n"
"Зауважте, що Ви не обмежені вибором однієї додаткової мови. Ви можете\n"
"вибрати їх кілька або встановити їх всі, вибравши пункт \"%s\". Вибір\n"
"підтримки мови означає вибір перекладів, шрифтів, перевірку орфографії\n"
"і т.д. Крім того, пункт \"%s\" заставить систему використовувати Юнікод\n"
"(UTF-8). Але майте на увазі, що це експериментальна можливість. Якщо\n"
"Ви виберете мови, які потребують іншого кодування, підтримку Юнікоду\n"
"буде встановлено обов'язково.\n"
"\n"
"Для перемикання між різними мовами, встановленими в системі, можете\n"
"виконати команду \"/usr/sbin/localedrake\" з правами \"root\", щоб змінити\n"
"мову для всієї системи. Виконання цієї команди від звичайного користувача\n"
"змінить мову тільки для даного конкретного користувача."

#: help.pm:660
#, c-format
msgid "Espanol"
msgstr "Іспанська"

#: help.pm:663
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n"
"that says \"%s\". DrakX will then configure your mouse so that you can\n"
"simulate the wheel with it: to do so, press the middle button and move your\n"
"mouse up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
"Здебільшого DrakX не має проблем при визначенні кількості кнопок на\n"
"Вашій миші. Якщо це стається, приймається, що Ви маєте двохкнопкову\n"
"мишу, і можете сконфігурувати її для емуляції третьої кнопки. Третя кнопка\n"
"на двохкнопковій миші може бути ``натиснута'' одночасним натисканням\n"
"лівої і правої кнопок. DrakX автоматично знатиме, який інтерфейс "
"використовує\n"
"Ваша миша, PS/2, послідовний чи USB.\n"
"\n"
"Якщо з певних міркувань Ви хочете задати інший тип миші, виберіть його\n"
"із списку, який пропонується.\n"
"\n"
"Якщо Ви вибрали мишу, відмінну від запропонованої, буде показано тестовий\n"
"екран. Перевірте кнопки і коліщатко, щоб переконатися, що миша працює "
"добре.\n"
"Якщо миша працює неправильно, натисніть пробіл або [Return], щоб покинути\n"
"тест і повернутися в список вибору.\n"
"\n"
"Миші з коліщатком деколи не визначаються автоматично, тому Вам буде\n"
"потрібно вибрати мишу із списку. Переконайтеся, що Ви вибираєте мишу\n"
"відповідно до порта, до якого вона під'єднана. Після того, як Ви виберете\n"
"мишу і натиснете на кнопку \"%s\", на екрані появиться зображення миші.\n"
"Покрутіть коліщатко миші, щоб переконатися, що воно активізоване правильно.\n"
"Після того, як Ви побачите, що коліщатко на екрані рухається відповідно\n"
"до коліщатка на миші, протестуйте кнопки і переконайтеся, що вказівник миші\n"
"на екрані рухається відповідно до переміщення миші."

#: help.pm:691
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "3 кнопки з емуляцією коліщатка"

#: help.pm:694
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Будь-ласка, виберіть вірний порт. Наприклад, порт  COM1 у MS\n"
"Windows має назву ttyS0 у GNU/Лінаксі."

#: help.pm:698
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password you chose is too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the Internet and you absolutely trust everybody\n"
"who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Це найважливіший крок для безпеки Вашої системи GNU/Linux: Вам\n"
"потрібно ввести пароль для користувача Root. Root - це системний\n"
"адміністратор і тільки йому дозволено робити поновлення системи,\n"
"додавати користувачів, змінювати загальну конфіґурацію системи, таке\n"
"інше. Одним словом - Root може все! Ось чому Вам слід вибирати пароль,\n"
"який важко вгадати - drakX підкаже Вам, якщо пароль занадто легкий. Як\n"
"Ви побачите, пароль вводити необов'язково, але ми настійливо застерігаємо\n"
"Вас проти такого. GNU/Linux така ж схильна до помилок оператора, як і\n"
"будь-яка інша система. Оскільки Root може обминути всі обмеження і\n"
"ненароком стерти всі дані на всіх розділах, неуважно працюючи з ними,\n"
"тому повинно бути важко стати користувачем root.\n"
"\n"
"Пароль має бути сумішшю алфавітно-цифрових символів і бути завдовжки\n"
"не менше 8 символів. Ніколи не записуйте пароль -- це зробить занадто\n"
"легким отримання несанкціонованого доступу до системи.\n"
"\n"
"Одне застереження -- не робіть пароль занадто довгим чи складним, тому\n"
"що Вам потрібно його запам'ятовувати.\n"
"\n"
"Коли Ви будете вводити пароль, його не буде видно на екрані. Щоб\n"
"зменшити можливість помилки при вводі пароля \"всліпу\", Вам\n"
"потрібно буде ввести його двічі. Якщо ж так станеться, що Ви допустите\n"
"одну і ту ж помилку двічі, Вам потрібно буде ввести цей \"неправильний\"\n"
"пароль при першій реєстрації в системі.\n"
"\n"
"Якщо Ви хочете дозволити доступ до цього комп'ютера для його контролю\n"
"сервером автентикації, натисніть кнопку \"%s\".\n"
"\n"
"Якщо Ваша мережа використовує служби автентифікації LDAP, NIS або\n"
"PDS Windows Domain, виберіть одну з можливостей з \"%s\". Якщо Ви не\n"
"знаєте, яку з них використовувати, запитайте в свого системного "
"адміністратора.\n"
"\n"
"Якщо Ви боїтесь, що маєте проблеми із запам'ятовуванням паролів, якщо\n"
"Ваш комп'ютер ніколи не буде під'єднано до інтернету, або Ви абсолютно\n"
"довіряєте всім, хто використовує Ваш комп'ютер, можете вибрати \"%s\"."

#: help.pm:733
#, c-format
msgid "authentication"
msgstr "розпізнавання"

#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:733 install_steps_interactive.pm:1159
#, c-format
msgid "No password"
msgstr "Без паролю"

#: help.pm:736
#, fuzzy, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
"management, notably for laptops. If you know your hardware supports it and\n"
"you need it, check this box.\n"
"\n"
" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n"
"instabilities, machine freeze, ...) you should try disabling APIC by\n"
"checking this box.\n"
"\n"
"!! Be aware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrakelinux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
"Цей діалог допоможе Вам налаштувати Ваш завантажувач.\n"
"\n"
" * \"%s\": існує три варіанти Вашого завантажувача:\n"
"\n"
"    * \"%s\": якщо Ви віддаєте перевагу grub (текстове меню).\n"
"\n"
"    * \"%s\": якщо Ви віддаєте перевагу LILO з текстовим інтерфейсом.\n"
"\n"
"    * \"%s\": якщо Ви віддаєте перевагу LILO з графічним інтерфейсом.\n"
"\n"
" * \"%s\":  у більшості випадків Вам не потрібно буде змінювати типовий\n"
"диск (\"%s\"), але якщо Ви захочете, завантажувач може бути встановлено\n"
"на другий твердий диск (\"%s\"), чи навіть на дискету (\"%s\");\n"
"\n"
" * \"%s\": це затримка, яка надається користувачеві при завантаженні\n"
"або перезавантаженні системи, щоб він мав можливість вибрати відмінні\n"
"від типових параметри в меню завантажувача.\n"
"\n"
"!! Будьте уважними: якщо Ви виберете не встановлювати завантажувач\n"
"(вибравши \"%s\"), переконайтеся, що Ви маєте інший спосіб завантаження\n"
"системи Мандрейк Лінакс! Будьте також певними, що Ви добре знаєте, що Ви\n"
"робите, коли Ви змінюєте будь-які параметри!!\n"
"\n"
"Натиснувши кнопку \"%s\" в цьому вікні, Ви отримаєте доступ до\n"
"багатьох додаткових конфіґураційних параметрів, призначених для\n"
"досвідчених користувачів."

#: help.pm:768
#, c-format
msgid "GRUB"
msgstr "GRUB"

#: help.pm:768
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: help.pm:768
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: help.pm:768
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: help.pm:768
#, c-format
msgid "Delay before booting the default image"
msgstr "Пауза перед завантаженням типового образу"

#: help.pm:768
#, fuzzy, c-format
msgid "Force no APIC"
msgstr "Заборонити APIC"

#: help.pm:771
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"Після того, як налаштуєте основні параметри завантажувача, буде\n"
"показано список параметрів завантаження, які використовуватимуться\n"
"при завантаженні.\n"
"\n"
"Якщо існують інші операційні системи, вже встановлені на Вашій машині,\n"
"вони будуть автоматично додані до меню завантаження. Ви можете підправити\n"
"існуючі пункти, натиснувши \"%s\" для створення нового пункту; вибрати\n"
"пункт і натиснути \"%s\" або \"%s\" для його зміни або видалення. \"%s\" \n"
"підтверджує зміни.\n"
"\n"
"Ви, можливо, також захочете закрити доступ до цих операційних систем\n"
"іншим, в цьому випадку Ви можете стерти відповідні пункти в файлі\n"
"конфіґурації. Але в цьому випадку Вам потрібна буде спеціальна\n"
"дискета, щоб завантажити ці системи!"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakbackup:1604 standalone/drakfont:589 standalone/drakfont:655
#: standalone/drakups:280 standalone/drakups:329 standalone/drakups:349
#: standalone/drakvpn:331 standalone/drakvpn:692
#, c-format
msgid "Add"
msgstr "Додати"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#, c-format
msgid "Modify"
msgstr "Змінити"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakups:282 standalone/drakups:331 standalone/drakups:351
#: standalone/drakvpn:331 standalone/drakvpn:692
#, c-format
msgid "Remove"
msgstr "Видалити"

#: help.pm:787
#, fuzzy, c-format
msgid ""
"LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or any\n"
"other OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
"won't install any bootloader. Use it only if you know what you are doing."
msgstr ""
"LILO і grub є завантажувачами GNU/Linux. Цей етап є повністю\n"
"автоматизованим. DrakX проаналізує завантажувальний сектор диску\n"
"і відповідно до знайденого на ньому виконає таке:\n"
"\n"
" * якщо знайдено сектор завантаження Windows, він замінить його на сектор\n"
"завантаження grub/LILO. В такий спосіб Ви зможете завантажувати як\n"
"GNU/Linux, так і іншу ОС.\n"
"\n"
" * якщо знайдено сектор завантаження grub або LILO, його буде замінено на\n"
"новий.\n"
"\n"
"Якщо неможливо зробити визначення, DrakX запитає Вас, куди встановити\n"
"завантажувач."

#: help.pm:803
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrakelinux offers two. Each of the printing systems\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it is compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"Зараз настав час вибрати систему друку на Вашому комп'ютері. Інші ОС мають\n"
"одну систему друку, але Лінакс Мандрейк пропонує дві. Кожна система\n"
"друку найкраще підходить до різних типів конфігурації.\n"
"\n"
" * \"%s\" -- який є акронімом для ``друкувати, не ставити в чергу'', є "
"вибором, коли\n"
"Ви маєте безпосередньо під'єднану друкарку і не хочете мати проблем із\n"
"заминанням паперу, і не маєте мережевих друкарок. (\"%s\" керуватиме тільки\n"
"дуже простими випадками з мережею і є в деякій мірі повільнішим, ніж\n"
"використання з мережами). Рекомендується використовувати \"pdq\", якщо\n"
"це Ваш перший досвід використання GNU/Linux.\n"
"\n"
" * \"%s\" - `` Загальна система друку для Лінакс'', є відміннім вибором для "
"друку\n"
"на місцеву друкарку або на іншу в будь-якій точці планети. Вона проста для\n"
"налаштування і може працювати як клієнт або сервер для старих систем друку\n"
"\"lpd \", тобто є сумісною з попередніми операційними системами, які можуть\n"
"все ще вимагати сервісів друку. Хоч вона і є дуже потужною, загальне\n"
"встановлення є майже таким самим простим, як і \"pdq\". Якщо Вам потрібно\n"
"емулювати сервер \"lpd\", переконайтеся, що увімкнена служба \"cups-lpd \".\n"
"\"%s\" має графічну оболонку для друку або вибору параметрів друкарки і\n"
"управління нею.\n"
" \n"
"Якщо Ви зараз зробите вибір, а пізніше побачите, що ця система друку Вам\n"
"не подобається, Ви можете її замінити з допомогою PrinterDrake з Центру\n"
"керування Мандрейк, натиснувши кнопку Експерт."

#: help.pm:826
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:826 printer/cups.pm:115 printer/data.pm:83
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:829
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"Спочатку DrakX спробує відшукати всі тверді диски на Вашому\n"
"комп'ютері. Також він зробить пошук одної або більше карт PCI SCSI.\n"
"Якщо DrakX знайде плату SCSI, то автоматично встановить для неї\n"
"драйвер.\n"
"\n"
"Через те, що визначення заліза не є простим, DrakX може завершити\n"
"визначення твердих дисків невдало. Якщо таке трапиться, Вам потрібно\n"
"буде ввести тип обладнання вручну.\n"
"\n"
"Якщо Вам потрібно буде вручну вибирати драйвер, DrakX запитає,\n"
"чи хочете Ви налаштувати його параметри. Краще, якщо Ви вкажете\n"
"DrakX випробувати плату з особливими для неї параметрами, потрібними\n"
"для ініціалізації адаптера. У більшості випадків це працює нормально.\n"
"\n"
"Якщо DrakX не зможе встановити тип параметрів, необхідних для\n"
"передачі обладнанню, Вам потрібно буде налаштувати драйвер вручну."

#: help.pm:847
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"Можете додати додаткові пункти для yaboot для інших операційних систем,\n"
"інших ядер чи для аварійного образу завантаження.\n"
"\n"
"Для інших ОС - пункт складається тільки з мітки та розділу\"root\".\n"
"\n"
"Для Лінакса є кілька можливих параметрів: \n"
"\n"
"  * Мітка: це просто назва, яку ви маєте надрукувати при запрошенні\n"
"yaboot, щоб вибрати цей параметр завантаження.\n"
"\n"
"  * Образ: це назва ядра для завантаження. У більшості випадків - це\n"
"vmlinux або варіанти назви з різними розширеннями.\n"
"\n"
"  * Коренева файлова система: пристрій для кореневої файлової системи,\n"
"або '/' Вашої системи Лінакс.\n"
"\n"
" * Додати: на апаратному забезпеченні Apple для ініціалізації відео-плати\n"
"або для ініціалізації клавіатурної емуляції кнопок миші (на стандартній "
"миші\n"
"Apple немає 2-ї і 3-ї кнопок) досить часто використовуються додаткові\n"
" параметри. Далі подані деякі приклади: \n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
"\n"
"  * Initrd: цей параметр може використовуватися або для завантаження\n"
"модулів до того, як пристрій завантаження стане доступним, або\n"
"для завантаження віртуального диску у випадку аварійного завантаження.\n"
"\n"
"  * Розмір initrd: стандартний віртуальний диск має розмір 4096 байт,\n"
"якщо Вам потрібен диск більшого розміру, можете скористатися цим\n"
"параметром.\n"
"\n"
"  * Запис/читання: звичайно коренева файлова система початково\n"
"монтується в режимі тільки читання, щоб мати можливість провести перевірку\n"
"файлової системи перш, ніж система завантажується в робочий режим. Це\n"
"можна відмінити цим параметром.\n"
"\n"
"  * БезВідео: у випадку, коли відео-плата Apple виявиться особливо\n"
"проблематичною, Ви можете вибрати цей параметр, щоб\n"
"стартувати у режимі без відео з підтримкою рідного framebuffer.\n"
"\n"
"  * Стандарна: типовий вибір Лінакса, вибирається, якщо Ви натиснете\n"
"ENTER у рядку вводу yaboot. Також цей пункт буде виділений\n"
"символом ``*'', якщо Ви натиснете [Tab], щоб подивитися список\n"
"команд boot."

#: help.pm:894
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Take care to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot - це завантажувач системи для Макінтошів NewWorld і може\n"
"використовуватися для завантаження GNU/Linux, MacOS або MacOSX.\n"
"Переважно MacOS і MacOSX вірно визначаються і встановлюються в\n"
"меню завантажувача. Якщо це не так, Ви можете додати відповідний пункт\n"
"вручну на цьому екрані. Будьте уважні при виборі коректних\n"
"параметрів. \n"
"\n"
"Основні параметри Yaboot:\n"
"\n"
"   * Повідомлення при завантаженні: просте текстове повідомлення, яке\n"
"появляється перед завантаженням.\n"
"\n"
"  * Пристрій завантаження: вказує на те, де саме записується\n"
"інформація, потрібна для завантаження GNU/Linux. В загальному\n"
"випадку Ви вже встановили розділ завантаження раніше, щоб зберігати цю\n"
"інформацію. \n"
"\n"
"  * Затримка Open Firmware: на відміну від Lilo, тут є два різних\n"
"періоди затримки в Yaboot. Перший період затримки вимірюється в\n"
"секундах. Під час цього періоду затримки Ви можете вибрати, звідки\n"
"завантажуватися: з компакт-диску, OF, MacOS чи Лінакс.\n"
"\n"
"  * Період затримки перед завантаженням ядра: цей період подібний до\n"
"затримки Lilo. Після вибору Лінакса, затримка обчислюється в десятих\n"
"секунди перш, ніж почне завантажуватися стандартне ядро.\n"
"\n"
"  * Дозволити завантаження з компакт-диску?: якщо цей параметр\n"
"вибрано, Ви можете натиснути 'C' при завантаженні під час першого\n"
"періоду затримки.\n"
"\n"
"  * Дозволити завантаження OF: якщо Ви виберете цей параметр,\n"
"зможете натиснути 'N' під час першого періоду затримки для\n"
"завантаження з Open Firmware.\n"
"\n"
"  * Стандартна ОС: цим Ви можете встановити стандартну систему, яка\n"
"завантажиться після того, як закінчиться затримка Open Firmware."

#: help.pm:926
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""
"\"%s\": якщо система визначить звукову карту, її тип буде показано тут.\n"
"Якщо Ви побачите, що вона не того типу, що дійсно вставлена у Вашій\n"
"системі, можете натиснути кнопку і вибрати інший драйвер."

#: help.pm:929 help.pm:991 install_steps_interactive.pm:967
#: install_steps_interactive.pm:984
#, c-format
msgid "Sound card"
msgstr "Звукова плата"

#: help.pm:932
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you wish to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"DrakX пропонує для перегляду підсумкову інформацію, яку він зібрав про\n"
"Вашу систему. В залежності від встановленого заліза, у Вас повинні бути або\n"
"всі, або деякі пункти. Кожен пункт може бути налаштований, що завершується\n"
"коротким підсумком про поточну конфігурацію. Натисніть на відповідну \"%s\"\n"
"кнопку, щоб змінити.\n"
"\n"
" * \"%s\": перевірити поточну розкладку клавіатури і змінити, якщо "
"потрібно.\n"
"\n"
" * \"%s\": перевірити вибір країни. Якщо Ви знаходитесь не в цій країні, "
"натисніть\n"
"кнопку \"%s\" і виберіть іншу. Якщо Вашої країни немає в показаному "
"початковому\n"
"списку, натисніть кнопку \"%s\", щоб отримати повний список країн.\n"
"\n"
" * \"%s\": типово DrakX визначає часовий пояс на основі країни, які Ви "
"вибрали.\n"
"Ви можете натиснути кнопку \"%s\", якщо його визначено неправильно.\n"
"\n"
" * \"%s\": перевірте налаштування миші і натисніть на кнопку, щоб змінити,\n"
"якщо необхідно.\n"
"\n"
" * \"%s\": натиснувши на кнопку \"%s\" Ви відкриєте Помічника\n"
"налаштування друкарки. Зверніться до відповідного розділу ``Starter\n"
"Guide'' для детальнішої інформації про те, як встановити нову друкарку.\n"
"Інтерфейс, представлений там, є подібний до того, що використовується\n"
"при встановленні.\n"
"\n"
" * \"%s\": якщо у Ваший системі знайдено звукову карту, вона буде показана\n"
"тут. Якщо Ви виявите, що показана звукова карта не є тою, що насправді\n"
"встановлена у системі, можете натиснути на кнопку і вибрати інший драйвер.\n"
"\n"
" * \"%s\": типово DrakX налаштовує графічний інтерфейс з роздільною\n"
"здатністю \"800x600\" або \"1024x768\". Якщо це Вас не задовільняє, "
"натисніть\n"
"\"%s\" щоб переналаштувати графічний інтерфейс.\n"
"\n"
" * \"%s\": якщо у Вашій системі знайдено карту ТБ, її має бути показано "
"тут.\n"
"Якщо ж Ви маєте карту ТБ, але її не знайдено, натисніть \"%s\", щоб\n"
"спробувати налаштувати її вручну.\n"
"\n"
" * \"%s\": якщо у Вашій системі знайдено карту ISDN, її має бути показано "
"тут.\n"
"Ви можете натиснути \"%s\", щоб змінити параметри, пов'язані з картою.\n"
"\n"
" * \"%s\": Якщо Ви хочете зараз налаштувати доступ до інтернету або "
"місцевої\n"
"мережі.\n"
"\n"
" * \"%s\": цей пункт дасть змогу перевизначити рівень безпеки, який "
"встановлено\n"
"попереднім кроком ().\n"
"\n"
" * \"%s\": якщо Ви плануєте під'єднати Вашу машину до інтернету, хорошою\n"
"ідеєю є захистися від вторгення шляхом встановлення захисного шлюза.\n"
"Зверніться до відповідного розділу ``Starter Guide'' для детальнішеї "
"інформації\n"
"про встановлення захосного шлюза.\n"
"\n"
" * \"%s\": якщо Ви хочете змінити конфігурацію завантажувача, натисніть цю\n"
"кнопку. Це зарезервовано для досвідчених користувачів.\n"
"\n"
" * \"%s\": тут Ви можете підправити, які служби будуть виконуватися на "
"Вашій\n"
"машині. Якщо Ви пладуєте використовувати цю машину в якості сервера,\n"
"хорошою ідеєю є переглянути ці установки."

#: help.pm:991 install_steps_interactive.pm:110
#: install_steps_interactive.pm:900 standalone/keyboarddrake:23
#, c-format
msgid "Keyboard"
msgstr "Клавіатура"

#: help.pm:991 install_steps_interactive.pm:926
#, c-format
msgid "Timezone"
msgstr "Часовий пояс"

#: help.pm:991
#, c-format
msgid "Graphical Interface"
msgstr "Графічний інтерфейс"

#: help.pm:991 install_steps_interactive.pm:1000
#, c-format
msgid "TV card"
msgstr "Телевізійна плата"

#: help.pm:991
#, c-format
msgid "ISDN card"
msgstr "Карта ISDN"

#: help.pm:991 install_steps_interactive.pm:1018 standalone/drakbackup:2101
#, c-format
msgid "Network"
msgstr "Мережа"

#: help.pm:991 install_steps_interactive.pm:1044
#, c-format
msgid "Security Level"
msgstr "Рівень безпеки"

#: help.pm:991 install_steps_interactive.pm:1058
#, c-format
msgid "Firewall"
msgstr "Захисний шлюз"

#: help.pm:991 install_steps_interactive.pm:1072
#, c-format
msgid "Bootloader"
msgstr "Завантажувач"

#: help.pm:991 install_steps_interactive.pm:1082 services.pm:195
#, c-format
msgid "Services"
msgstr "Сервіси"

#: help.pm:994
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Виберіть твердий диск, який Ви хочете відформатувати для\n"
"створення нового розділу Лінакс Мандрейк. Будьте обережні,\n"
"всі дані, що знаходяться в цьому розділі, будуть втрачені і їх\n"
"неможливо буде відновити!"

#: help.pm:999
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Натисніть \"%s\", якщо Ви хочете стерти всі дані і розділи на цьому\n"
"твердому диску. Будьте уважні, після натиснення на \"%s\" Ви\n"
"не зможете відновити жодних даних і розділів на цьому твердому\n"
"диску, включаючи також будь-які дані Віндовс.\n"
"\n"
"Натисніть \"%s\", щоб зупинити цю операцію без втрати даних і\n"
"розділів, які знаходяться на цьому твердому диску."

#: install2.pm:119
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Неможливо отримати доступ до модулів ядра, що відповідають Вашому ядру\n"
"(немає файла %s), здебільшого це означає, що Ваша дискета для завантаження\n"
"не синхронізована з інсталяційним носієм (будь-ласка, створіть новішу\n"
"дискету для завантаження)"

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Вам потрібно також відформатувати %s"

#: install_any.pm:411
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Ви вибрали такі(ий) сервер(и): %s\n"
"\n"
"\n"
"Ці сервери стандартно активізовані. Для них невідомі будь-які проблеми з\n"
"безпекою, але деякі можуть бути виявлені. В такому випадку Ви повинні\n"
"якомога швидше поновити версії цих серверів. \n"
"\n"
"\n"
"Ви хочете дозволити встановлення цих серверів?\n"

#: install_any.pm:432
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Наступні пакунки будуть вилучені, щоб забезпечити поновлення\n"
"Вашої системи: %s\n"
"\n"
"\n"
"Ви справді хочете вилучити ці пакунки?\n"

#: install_any.pm:827
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Вставте дискету відформатовану у FAT в привід %s"

#: install_any.pm:831
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Ця дискета не відформатована як FAT"

#: install_any.pm:843
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Для того, щоб використати записаний вибір пакунків, завантажте\n"
"систему з ``linux defcfg=floppy''"

#: install_any.pm:871 partition_table.pm:847
#, c-format
msgid "Error reading file %s"
msgstr "Помилка при читанні файла %s"

#: install_any.pm:995
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Сталася помилка - не знайдено відповідних пристроїв для створення нових "
"файлових систем. Перевірте, будь-ласка, свою систему і спробуйте відшукати "
"причину цього."

#: install_gtk.pm:161
#, c-format
msgid "System installation"
msgstr "Встановлення системи"

#: install_gtk.pm:164
#, c-format
msgid "System configuration"
msgstr "Конфігурація системи"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Деякі з апаратних засобів на Вашому комп'ютері вимагають драйверів\n"
"фірм-виготовлювачів для того, щоб працювати вірно. \n"
"\n"
"Ви можете знайти потрібну інформацію про них на: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Ви повинні мати розділ root.\n"
"Для цього створіть новий розділ (або клацніть на вже\n"
"існуючому). Після цього виберіть ``Точка монтування'' і встановіть її в `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Ви не маєте розділу swap.\n"
"\n"
"Все-таки продовжувати? "

#: install_interactive.pm:70 install_steps.pm:206
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Ви повинні мати розділ FAT, змонтований в /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Недостатньо вільного простору для розташування нових розділів"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Користуватися існуючими розділами"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Немає існуючих розділів для використання"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Використовувати розділ Windows для зворотнього монтування"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Який розділ Ви хочете використовувати для Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Виберіть розміри"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Розмір розділу root в Мб:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Розмір розділу Swap в Мб: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Немає розділу FAT для використання як пристрою зворотнього монтування (або "
"не вистачає вільного місця)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Розмір якого розділу Ви хочете змінити?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Програма зміни розміру розділу FAT не може працювати з Вашим\n"
"розділом, при роботі сталася така помилка: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Розраховується розмір розділу Віндовс"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""
"Розділ з Windows на Вашому комп'ютері занадто фраґментований. Будь-ласка, "
"перезавантажте свій комп'ютер під Windows, запустіть програму 'defrag', тоді "
"перезапустіть встановлення Лінакс Мандрейк."

#: install_interactive.pm:164
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ПОПЕРЕДЖЕННЯ!\n"
"\n"
"Зараз DrakX змінить розмір розділу Windows. Будьте уважні:\n"
"ця операція небезпечна. Якщо Ви ще не зробили, Вам потрібно\n"
"зараз припинити встановлення, виконати \"chkdsk c:\" з командного\n"
"рядка у Windows (майте на увазі, запуска графічної програми \n"
"\"scandisk\" недостатньо, необхідно виконати \"chkdsk\" саме з\n"
"командного рядка!), виконати defrag (необов'язково), тоді перезапустити\n"
"встановлення. Потрібно також зробити резервну копію\n"
"Ваших даних.\n"
"Якщо Ви впевнені - тисніть Гаразд."

#: install_interactive.pm:176
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Який розмір Ви хочете залишити для Windows?"

#: install_interactive.pm:177
#, c-format
msgid "partition %s"
msgstr "розділ %s"

#: install_interactive.pm:186
#, c-format
msgid "Resizing Windows partition"
msgstr "Зміна розміру розділу Windows"

#: install_interactive.pm:191
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Зміна розміру FAT не відбулася: %s"

#: install_interactive.pm:206
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "Немає розділу FAT для зміни розміру (або не залишилося вільного місця)"

#: install_interactive.pm:211
#, c-format
msgid "Remove Windows(TM)"
msgstr "Стерти Windows(TM)"

#: install_interactive.pm:213
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "У Вас більше одного диску. На який з них Ви хочете встановити Лінакс?"

#: install_interactive.pm:217
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ВСІ існуючі розділи та всі дані на диску %s будуть втрачені"

#: install_interactive.pm:230
#, c-format
msgid "Use fdisk"
msgstr "Використовувати fdisk"

#: install_interactive.pm:233
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Тепер Ви можете розбити диск %s на розділи.\n"
"Після того, як закінчите, не забудьте виконати команду `w'"

#: install_interactive.pm:269
#, c-format
msgid "I can't find any room for installing"
msgstr "Не можу знайти вільного місця для встановлення"

#: install_interactive.pm:273
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Помічник розбивки на розділи DrakX знайшов такі можливі рішення:"

#: install_interactive.pm:279
#, c-format
msgid "Partitioning failed: %s"
msgstr "Розбиття на розділи невдале: %s"

#: install_interactive.pm:286
#, c-format
msgid "Bringing up the network"
msgstr "Вмикаю мережу"

#: install_interactive.pm:291
#, c-format
msgid "Bringing down the network"
msgstr "Вимикаю мережу"

#: install_messages.pm:9
#, fuzzy, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Вступ\n"
"\n"
"Операційна система та різноманітні компоненти, які входять в\n"
"дистрибутив Лінакс Мандрейк, надалі називаються \"Програмні\n"
"продукти\". Програмні продукти включають, але не тільки, набори\n"
"програм, методів, правил та документації, які мають відношення до\n"
"операційної системи та різноманітних складових частин дистрибутива\n"
"Лінакс Мандрейк.\n"
"\n"
"1. Ліцензійна угода\n"
"\n"
"Будь ласка, прочитайте цю угоду уважно. Цей документ є ліцензійною\n"
"угодою між Вами та MandrakeSoft S.A., яка стосується програмних\n"
"продуктів. Встановленням, дублюванням чи використанням Програмних\n"
"продуктів будь-яким чином, Ви явно приймаєте та повністю\n"
"погоджуєтесь з умовами даної Ліцензії. Якщо Ви не погоджуєтесь з\n"
"будь-якою частиною Ліцензійної угоди, Вам не дозволяється\n"
"встановлювати, дублювати чи користуватися Програмним\n"
"продуктом. Будь-яка спроба встановлення, дублювання чи використання\n"
"Програмного продукту чином, який не відповідає умовам Угоди, визнається\n"
"порушенням Угоди, і тим самим Ви позбавляєтесь прав за цією\n"
"Угодою. Після припинення дії цієї Угоди Ви повинні негайно знищити\n"
"всі копії Програмних Продуктів.\n"
"\n"
"2. Обмежена гарантія\n"
"\n"
"Програмні продукти та доповнююча документація поставляються \"як є\",\n"
"без гарантії, в межах встановлених законодавством. Ні за яких умов\n"
"MandrakeSoft S.A. не буде нести відповідальності, в межах встановлених\n"
"законодавством, за випадкові, прямі чи опосередковані (включаючи, але\n"
"не обмежуючись втратами чи перепинами бізнесу, фінансовими втратами,\n"
"адвокатськими витратами чи штрафами як результат присуду судової\n"
"інстанції, чи будь-які інші втрати), що походять від використання,\n"
"або, навпаки, від неможливості використання Програмного продукту, навіть\n"
"у випадку, якщо MandrakeSoft S.A. повідомляло про можливості таких\n"
"втрат.\n"
"\n"
"ОБМЕЖЕННЯ ВІДПОВІДАЛЬНОСТІ, ЗАЛЕЖНОЇ ВІД ОБЛАДАННЯ АБО\n"
"ВИКОРИСТАННЯ ЗАБОРОНЕНИХ ПРОГРАМНИХ ПРОДУКТІВ В ДЕЯКИХ\n"
"КРАЇНАХ\n"
"\n"
"В межах, встановлених законодавством, MandrakeSoft S.A. чи його\n"
"дистрибютори ні за яких умов не несуть відповідальності за жодне\n"
"навмисне, випадкове, пряме чи опосередковане пошкодження, (включаючи\n"
"але не обмежуючись перешкодами для бізнесу, припиненням бізнесу,\n"
"фінансовими втратами, адвокатськими витратами чи штрафами як\n"
"результат присуду судової інстанції, чи будь-якими іншим втратами),\n"
"які виникають від обладання чи використання програмних компонентів чи\n"
"виникають від завантаження заборонених законодавством чи обмежених до\n"
"використання в деяких країнах програмних компонент по мережі з однієї\n"
"з домашніх сторінок Лінакс Мандрейк. Ця обмежена відповідальність\n"
"включає також (але не обмежується) так званими сильними\n"
"криптографічними методами, які включені в Програмний продукт.\n"
"\n"
"3. Ліцензія GPL та подібні\n"
"\n"
"Програмні продукти складаються із складових, розроблених різними\n"
"фізичними чи юридичними особами. Більшість компонент виконано\n"
"відповідно до умов загальної публічної ліцензії GNU (GNU General\n"
"Public Licence), яка надалі в даному документі називається GPL,\n"
"або подібними до даної ліцензіями. Більшість\n"
"з цих ліцензій дозволяють використання, дублювання, прийняття та\n"
"перерозповсюдження складових частин, які вони регулюють. Будь-ласка,\n"
"ознайомтесь уважно з термінами та умовами ліцензійних умов для кожної\n"
"складової частини, перш ніж використовувати будь-яку з\n"
"частин. Будь-які запитання стосовно ліцензії на окрему складову\n"
"частину мають адресуватися автору цієї складової частини, а не до\n"
"MandrakeSoft. Програми, розроблені MandrakeSoft S.A., керуються\n"
"ліцензією GPL. Документація, розроблена MandrakeSoft S.A,. керується\n"
"спеціальною ліцензією. Зверніться, будь-ласка, до документації за\n"
"подробицями.\n"
"\n"
"4. Права інтелектуальної власності\n"
"\n"
"Всі права на складові компоненти Програмних продуктів належать\n"
"відповідним авторам і захищені законами про інтелектуальну власність\n"
"на програмне забезпечення.\n"
"MandrakeSoft S.A. залишає за собою право змінювати чи\n"
"адаптувати Програмні продукти як в цілому, так і окремими частинами з\n"
"будь-якою метою і для будь-яких цілей. \"Mandrake\", \"Mandrakelinux\" та\n"
"відповідні логотипи є торгjвельними марками MandarakeSoft S.A.\n"
"\n"
"5. Законодавство\n"
"\n"
"Якщо будь-який розділ цієї угоди буде признано недійсним, таким, що не\n"
"відповідає законодавству чи невідповідним згідно судової постанови, цей\n"
"розділ угоди видаляється з даного контракту. Ви залишаєтесь зв'язаними\n"
"іншими розділами цієї угоди, які ще мають дію. Терміни та\n"
"умови цієї Ліцензії керуються Законодавством Франції. Всі спірні\n"
"питання щодо термінів та умов цієї ліцензії будуть розв'язуватися по\n"
"можливості поза межами судових установ. В крайніх випадках спірні\n"
"питання будуть вирішуватися відповідним Судом Парижа - Франція.\n"
"\n"
"З будь-якими питаннями щодо цього документа звертайтеся, будь-ласка,\n"
"до MandrakeSoft S.A.\n"

#: install_messages.pm:89
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"Попередження: Безкоштовні програми необов'язково можуть використовуватися\n"
"без патентів і деякі з таких програм, включених сюди, можуть бути захищені\n"
"патентами у Вашій країні. Наприклад, декодери MP3 можуть потребувати\n"
"ліцензії для подальшого використання (див. http://www.mp3licensing.com для\n"
"детальнішого ознайомлення. Якщо Ви не впевнені, чи патент годиться для Вас,\n"
"проконсультуйтесь про законодавство Вашої країни."

#: install_messages.pm:96
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Попередження\n"
"\n"
"Будь ласка, уважно прочитайте умови, подані далі. Якщо Ви не\n"
"погоджуєтесь з будь-якою частиною, Вам не дозволяється встановлювати\n"
"наступний компакт-диск. Натисніть на Відмовитися для того, щоб\n"
"продовжити встановлення без використання цього носія.\n"
"\n"
"Деякі компоненти на наступному компакт-диску не керуються ліцензією\n"
"GPL чи подібною до неї. В такому випадку кожен із компонентів\n"
"керується своєю специфічною ліцензією. Будь ласка, прочитайте уважно і\n"
"дотримуйтесь умов такої специфічної ліцензії перш, ніж користуватися\n"
"або перерозповсюджувати таку компоненту. Такі ліцензії у більшості\n"
"випадків забороняють передачу, копіювання (крім створення резервної\n"
"копії), перерозповсюдження, зворотню інженерію, дизасемблювання,\n"
"декомпіляцію чи модифікацію компоненти. Будь-яке порушення ліцензії\n"
"негайно припиняє Ваші права щодо компоненти. Якщо специфічно не\n"
"вказано про надання таких прав, Ви не маєте права встановлювати ці\n"
"програми на більш, ніж одній системі, або пристосовувати їх для\n"
"установки в мережі. Якщо Ви маєте сумніви щодо ліцензії, зверніться\n"
"безпосередньо до дистрибютора чи редактора такої компоненти. Передача\n"
"таких компонент (включаючи документацію) третім особам у більшості\n"
"випадків заборонена. \n"
"\n"
"Всі авторські права компонент на наступному компакт-диску застережені\n"
"за їх відповідними авторами і захищаються законами про охорону\n"
"авторських прав, які мають право застосовуватися до програмних\n"
"продуктів.\n"

#: install_messages.pm:128
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"Вітання, встановлення завершено. Вийміть з дисководів завантажувальні\n"
"носії і потім натисніть Return для перезавантаження системи.\n"
"\n"
"\n"
"Для інформації про виправлені помилки, знайдені в цій версії\n"
"Лінакс Мандрейк, зверніться до розділу Errata на сервері\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Інформація про налаштування Вашої системи приведена в "
"післявстановлювальному\n"
"розділі Офіційного Керівництва Користувача Mandrakelinux."

#: install_messages.pm:141
#, c-format
msgid "http://www.mandrakelinux.com/en/100errata.php3"
msgstr "http://www.mandrakelinux.com/en/100errata.php3"

#: install_steps.pm:241
#, c-format
msgid "Duplicate mount point %s"
msgstr "Подвійні точки монтування %s"

#: install_steps.pm:406
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Деякі важливі пакунки не вдалося вірно встановити. Ваш\n"
"компакт-диск або привід дефектні. Перевірте компакт-диск\n"
"командою \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n"

#: install_steps.pm:535
#, c-format
msgid "No floppy drive available"
msgstr "Немає привода дискети"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Починається крок `%s'\n"

#: install_steps_gtk.pm:178
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Ваша система має замало ресурсів. Ви можете мати проблеми з встановленням\n"
"Мандрейк Лінакса. Якщо це станеться, Ви можете спробувати встановлення в\n"
"текстовому режимі. Для цього під час завантаження з компакт-диску\n"
"натисніть F1 і потім введіть \"text\"."

#: install_steps_gtk.pm:232 install_steps_interactive.pm:587
#, c-format
msgid "Package Group Selection"
msgstr "Вибір груп пакунків"

#: install_steps_gtk.pm:292 install_steps_interactive.pm:519
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Загальний розмір: %d / %d Мб "

#: install_steps_gtk.pm:338
#, c-format
msgid "Bad package"
msgstr "Поганий пакунок"

#: install_steps_gtk.pm:340
#, c-format
msgid "Version: "
msgstr "Версія: "

#: install_steps_gtk.pm:341
#, c-format
msgid "Size: "
msgstr "Розмір: "

#: install_steps_gtk.pm:341
#, c-format
msgid "%d KB\n"
msgstr "%d Кб\n"

#: install_steps_gtk.pm:342
#, c-format
msgid "Importance: "
msgstr "Важливість: "

#: install_steps_gtk.pm:375
#, c-format
msgid "You can't select/unselect this package"
msgstr "Ви не можете вибрати або відмінити вибір цього пакунка."

#: install_steps_gtk.pm:379
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "немає kdesu"

#: install_steps_gtk.pm:380
#, c-format
msgid "due to unsatisfied %s"
msgstr "через незадоволеність %s"

#: install_steps_gtk.pm:381
#, c-format
msgid "trying to promote %s"
msgstr "пробую активізувати %s"

#: install_steps_gtk.pm:382
#, c-format
msgid "in order to keep %s"
msgstr "щоб залишити %s"

#: install_steps_gtk.pm:387
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Ви не можете вибрати цей пакунок, бо для його встановлення не залишилося "
"достатньо вільного місця."

#: install_steps_gtk.pm:390
#, c-format
msgid "The following packages are going to be installed"
msgstr "Ці пакунки буде встановлено"

#: install_steps_gtk.pm:391
#, c-format
msgid "The following packages are going to be removed"
msgstr "Наступні пакунки будуть вилучені"

#: install_steps_gtk.pm:415
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Цей пакунок необхідний, його вибір відмінити не можна"

#: install_steps_gtk.pm:417
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Вибір цього пакунка неможливо відмінити. Його вже встановлено."

#: install_steps_gtk.pm:420
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Цей пакунок повинен бути поновлений\n"
"Ви справді хочете відмінити його вибір?"

#: install_steps_gtk.pm:423
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Вибір цього пакунка неможливо відмінити. Він повинен бути поновлений."

#: install_steps_gtk.pm:428
#, c-format
msgid "Show automatically selected packages"
msgstr "Показувати автоматично вибрані пакунки"

#: install_steps_gtk.pm:433
#, c-format
msgid "Load/Save on floppy"
msgstr "Прочитати з дискети/записати на дискету"

#: install_steps_gtk.pm:434
#, c-format
msgid "Updating package selection"
msgstr "Поновлення вибору пакунків"

#: install_steps_gtk.pm:439
#, c-format
msgid "Minimal install"
msgstr "Мінімальне встановлення"

#: install_steps_gtk.pm:453 install_steps_interactive.pm:427
#, c-format
msgid "Choose the packages you want to install"
msgstr "Виберіть пакунки, які Ви хочете встановити"

#: install_steps_gtk.pm:469 install_steps_interactive.pm:673
#, c-format
msgid "Installing"
msgstr "Встановлюю"

#: install_steps_gtk.pm:475
#, c-format
msgid "No details"
msgstr "Деталей немає"

#: install_steps_gtk.pm:476
#, c-format
msgid "Estimating"
msgstr "Наближене обчислення"

#: install_steps_gtk.pm:482
#, c-format
msgid "Time remaining "
msgstr "Залишок часу "

#: install_steps_gtk.pm:494
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Зачекайте, іде підготовка встановлення..."

#: install_steps_gtk.pm:555
#, c-format
msgid "%d packages"
msgstr "%d пакунків"

#: install_steps_gtk.pm:560
#, c-format
msgid "Installing package %s"
msgstr "Встановлюється пакунок %s"

#: install_steps_gtk.pm:596 install_steps_interactive.pm:88
#: install_steps_interactive.pm:697
#, c-format
msgid "Refuse"
msgstr "Відкинути"

#: install_steps_gtk.pm:597 install_steps_interactive.pm:698
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Змініть компакт-диск!\n"
"\n"
"Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристрій і\n"
"натисніть Гаразд після цього.\n"
"\n"
"Якщо Ви не маєте такого диску, натисніть Скасувати, щоб не\n"
"встановлювати з цього диску."

#: install_steps_gtk.pm:612 install_steps_interactive.pm:710
#, c-format
msgid "There was an error ordering packages:"
msgstr "Сталася помилка під час сортування пакунків: "

#: install_steps_gtk.pm:612 install_steps_gtk.pm:616
#: install_steps_interactive.pm:710 install_steps_interactive.pm:714
#, c-format
msgid "Go on anyway?"
msgstr "Все-таки продовжувати?"

#: install_steps_gtk.pm:616 install_steps_interactive.pm:714
#, c-format
msgid "There was an error installing packages:"
msgstr "Сталася помилка під час встановлення пакунків: "

#: install_steps_gtk.pm:656 install_steps_interactive.pm:882
#: install_steps_interactive.pm:1034
#, c-format
msgid "not configured"
msgstr "не налаштовано"

#: install_steps_interactive.pm:81
#, c-format
msgid "Do you want to recover your system?"
msgstr "Чи Ви хочете відновити систему?"

#: install_steps_interactive.pm:82
#, c-format
msgid "License agreement"
msgstr "Ліцензійна угода"

#: install_steps_interactive.pm:111
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Будь-ласка, виберіть розкладку клавіатури."

#: install_steps_interactive.pm:113
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Тут наведено повний список наявних клавіатур"

#: install_steps_interactive.pm:143
#, c-format
msgid "Install/Upgrade"
msgstr "Встановити/Поновити"

#: install_steps_interactive.pm:144
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Це встановлення чи поновлення?"

#: install_steps_interactive.pm:150
#, c-format
msgid "Upgrade %s"
msgstr "Поновити %s"

#: install_steps_interactive.pm:160
#, c-format
msgid "Encryption key for %s"
msgstr "Ключ шифрування для %s"

#: install_steps_interactive.pm:177
#, c-format
msgid "Please choose your type of mouse."
msgstr "Будь-ласка, вкажіть тип Вашої миші."

#: install_steps_interactive.pm:186 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Порт миші"

#: install_steps_interactive.pm:187 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Виберіть, до якого послідовного порта під'єднано мишу?"

#: install_steps_interactive.pm:197
#, c-format
msgid "Buttons emulation"
msgstr "Емуляція кнопок"

#: install_steps_interactive.pm:199
#, c-format
msgid "Button 2 Emulation"
msgstr "Емуляція 2 клавіш"

#: install_steps_interactive.pm:200
#, c-format
msgid "Button 3 Emulation"
msgstr "Емуляція 3-ї кнопки"

#: install_steps_interactive.pm:221
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:221
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Конфігурую картки PCMCIA..."

#: install_steps_interactive.pm:228
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:228
#, c-format
msgid "Configuring IDE"
msgstr "Налаштування IDE"

#: install_steps_interactive.pm:248 network/tools.pm:195
#, c-format
msgid "No partition available"
msgstr "Немає розділів"

#: install_steps_interactive.pm:251
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Сканування розділів для знаходження точок монтування"

#: install_steps_interactive.pm:258
#, c-format
msgid "Choose the mount points"
msgstr "Виберіть точки монтування"

#: install_steps_interactive.pm:288
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Не вистачає вільного місця для 1МБ завантажувального блоку! Встановлення\n"
"буде продовжуватись, але для завантаження своєї системи Вам потрібно\n"
"буде створити DiskDrake'ом завантажувальний розділ"

#: install_steps_interactive.pm:325
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Виберіть розділи, які Ви хочете відформатувати"

#: install_steps_interactive.pm:327
#, c-format
msgid "Check bad blocks?"
msgstr "Перевіряти збійні блоки?"

#: install_steps_interactive.pm:359
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Перевірка файлової системи %s завершилася помилкою. Чи хочете Ви виправити "
"помилки (майте на увазі, що Ви можете втратити дані)?"

#: install_steps_interactive.pm:362
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Не вистачає простору підкачки, закінчити встановлення. Збільшіть\n"
"його, будь-ласка"

#: install_steps_interactive.pm:369
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Здійснюється пошук наявних пакунків і перебудова бази даних rpm..."

#: install_steps_interactive.pm:370 install_steps_interactive.pm:389
#, c-format
msgid "Looking for available packages..."
msgstr "Шукаю наявні пакунки..."

#: install_steps_interactive.pm:373
#, c-format
msgid "Looking at packages already installed..."
msgstr "Переглядається список вже встановлених пакунків..."

#: install_steps_interactive.pm:377
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Шукаю пакунки для поновлення..."

#: install_steps_interactive.pm:398
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"У Вашій системі не залишилось достатньо вільного місця для установки\n"
"чи поновлення (%d > %d )"

#: install_steps_interactive.pm:439
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Будь ласка, виберіть, завантажити чи записати вибір пакунків на дискету.\n"
"Формат дискети такий самий, як дискети auto_install."

#: install_steps_interactive.pm:441
#, c-format
msgid "Load from floppy"
msgstr "Завантажити з дискети"

#: install_steps_interactive.pm:441
#, c-format
msgid "Save on floppy"
msgstr "Записати на дискету"

#: install_steps_interactive.pm:445
#, c-format
msgid "Package selection"
msgstr "Вибір пакунків"

#: install_steps_interactive.pm:445
#, c-format
msgid "Loading from floppy"
msgstr "Завантажується з дискети"

#: install_steps_interactive.pm:450
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Вставте дискету, що містить вибір пакунків"

#: install_steps_interactive.pm:533
#, c-format
msgid ""
"Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
"tests, the 2.4 series kernel will be installed as the default to insure\n"
"compliance under the \"LSB\" group selection."
msgstr ""
"Через несумісність ядер серії 2.6 з тестами LSB, за замовчуванням\n"
"буде встановлено ядро з серії 2.4, щоб забезпечити сумісність з\n"
"вибором групи \"LSB\"."

#: install_steps_interactive.pm:540
#, c-format
msgid "Selected size is larger than available space"
msgstr "Вибраний розмір більший за наявний простір"

#: install_steps_interactive.pm:555
#, c-format
msgid "Type of install"
msgstr "Тип встановлення"

#: install_steps_interactive.pm:556
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Ви не вказали жодної групи пакунків.\n"
"Будь-ласка, вкажіть мінімальне встановлення, яке Ви хочете:"

#: install_steps_interactive.pm:560
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "З основною документацією (рекомендується!)"

#: install_steps_interactive.pm:561
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Насправді мінімальне встановлення (особливо немає urpmi)"

#: install_steps_interactive.pm:604 standalone/drakxtv:53
#, c-format
msgid "All"
msgstr "Все"

#: install_steps_interactive.pm:648
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Якщо Ви маєте всі компакт-диски з поданих вище, натисніть Гаразд.\n"
"Якщо Ви не маєте жодного з поданих вище, натисніть Скасувати.\n"
"Якщо тільки деяких компакт-дисків не вистачає, відмініть їх вибір і\n"
"натисніть Гаразд."

#: install_steps_interactive.pm:653
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Компакт-диск з етикеткою \"%s\""

#: install_steps_interactive.pm:673
#, c-format
msgid "Preparing installation"
msgstr "Підготовка встановлення"

#: install_steps_interactive.pm:682
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Встановлюється пакунок %s\n"
"%d%%"

#: install_steps_interactive.pm:728
#, c-format
msgid "Post-install configuration"
msgstr "Налаштування після встановлення"

#: install_steps_interactive.pm:734
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Вставте системну дискету в дисковод %s"

#: install_steps_interactive.pm:740
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Вставте дискету Поновлення Модулів в пристрій %s"

#: install_steps_interactive.pm:761
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Зараз Ви маєте можливість звантажити поновлені пакунки. Ці пакунки\n"
"було поновлено після виходу дистрибутиву. Вони можуть містити\n"
"виправлення безпеки або помилок.\n"
"\n"
"Щоб звантажити ці пакунки, Вам потрібно мати працююче з'єднання з\n"
"інтернетом.\n"
"\n"
"Ви хочете встановити ці поновлення?"

#: install_steps_interactive.pm:782
#, c-format
msgid ""
"Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr ""
"Зв'язуюсь з веб-сайтом Mandrakelinux, щоб отримати список наявних джерел..."

#: install_steps_interactive.pm:787
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Виберіть сервер, з якого звантажити пакунки"

#: install_steps_interactive.pm:801
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Зв'язуюсь з сервером, щоб прочитати список наявних пакунків..."

#: install_steps_interactive.pm:805
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Неможливо з'єднатися з дзеркалом %s"

#: install_steps_interactive.pm:805
#, c-format
msgid "Would you like to try again?"
msgstr "Чи хочете Ви спробувати знову?"

#: install_steps_interactive.pm:831 standalone/drakclock:42
#, c-format
msgid "Which is your timezone?"
msgstr "В якому часовому поясі Ви знаходитесь?"

#: install_steps_interactive.pm:836
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Автоматична синхронізація часу (із застосуванням NTP)"

#: install_steps_interactive.pm:844
#, c-format
msgid "NTP Server"
msgstr "Сервер NTP"

#: install_steps_interactive.pm:886 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Загалом"

#: install_steps_interactive.pm:899 install_steps_interactive.pm:907
#: install_steps_interactive.pm:925 install_steps_interactive.pm:932
#: install_steps_interactive.pm:1081 services.pm:135
#: standalone/drakbackup:1663
#, c-format
msgid "System"
msgstr "Система"

#: install_steps_interactive.pm:939 install_steps_interactive.pm:966
#: install_steps_interactive.pm:983 install_steps_interactive.pm:999
#: install_steps_interactive.pm:1010
#, c-format
msgid "Hardware"
msgstr "Залізо"

#: install_steps_interactive.pm:945 install_steps_interactive.pm:954
#, c-format
msgid "Remote CUPS server"
msgstr "Віддалений сервер CUPS"

#: install_steps_interactive.pm:945
#, c-format
msgid "No printer"
msgstr "Немає друкарки"

#: install_steps_interactive.pm:987
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Чи маєте Ви звукові карти ISA?"

#: install_steps_interactive.pm:989
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Виконайте \"sndconfig\" після встановлення, щоб налаштувати звукову карту"

#: install_steps_interactive.pm:991
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "Звукових карт не виявлено. Спробуйте \"harddrake\" після встановлення"

#: install_steps_interactive.pm:1011
#, c-format
msgid "Graphical interface"
msgstr "Графічний інтерфейс"

#: install_steps_interactive.pm:1017 install_steps_interactive.pm:1032
#, c-format
msgid "Network & Internet"
msgstr "Мережа та інтернет"

#: install_steps_interactive.pm:1033
#, fuzzy, c-format
msgid "Proxies"
msgstr "Профіль "

#: install_steps_interactive.pm:1034
#, fuzzy, c-format
msgid "configured"
msgstr "переналаштувати"

#: install_steps_interactive.pm:1043 install_steps_interactive.pm:1057
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "Безпека"

#: install_steps_interactive.pm:1062
#, c-format
msgid "activated"
msgstr "увімкнено"

#: install_steps_interactive.pm:1062
#, c-format
msgid "disabled"
msgstr "відімкнено"

#: install_steps_interactive.pm:1071
#, c-format
msgid "Boot"
msgstr "Завантажити"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1075
#, c-format
msgid "%s on %s"
msgstr "%s на %s"

#: install_steps_interactive.pm:1086 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Сервіси: %d увімкнено із %d зареєстрованих"

#: install_steps_interactive.pm:1096
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Ви не сконфігурували X. Ви впевнені, що дійсно цього хочете?"

#: install_steps_interactive.pm:1154
#, c-format
msgid "Set root password and network authentication methods"
msgstr "Встановити пароль користувача і методи розпізнавання мережі"

#: install_steps_interactive.pm:1155
#, c-format
msgid "Set root password"
msgstr "Встановити пароль користувача root"

#: install_steps_interactive.pm:1165
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Цей пароль занадто короткий (він повинен бути завдовжки хоча б %d літер)"

#: install_steps_interactive.pm:1170 network/netconnect.pm:563
#: standalone/drakauth:26 standalone/drakconnect:451
#, c-format
msgid "Authentication"
msgstr "Автентикація"

#: install_steps_interactive.pm:1201
#, c-format
msgid "Preparing bootloader..."
msgstr "Підготовлюю завантажувач..."

#: install_steps_interactive.pm:1211
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Здається у Вас машина OldWorld чи Невідома. Завантажувач yaboot не\n"
"буде працювати з цією машиною. Встановлення буде продовжуватись, але для\n"
"завантаження, Вам потрібно використати BootX чи якийсь інший спосіб для "
"завантаження Вашої машини"

#: install_steps_interactive.pm:1217
#, c-format
msgid "Do you want to use aboot?"
msgstr "Чи Ви хочете використовувати aboot?"

#: install_steps_interactive.pm:1220
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Помилка при встановленні aboot,\n"
"спробувати встановити примусово, навіть якщо це зруйнує перший розділ?"

#: install_steps_interactive.pm:1231
#, c-format
msgid "Installing bootloader"
msgstr "Встановлюю блок завантаження"

#: install_steps_interactive.pm:1238
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Встановлення завантажувача неуспішне. Сталася наступна помилка:"

#: install_steps_interactive.pm:1243
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Можливо, Вам потрібно змінити пристрій завантаження у Open Firmware,\n"
"щоб дозволити роботу завантажувача. Якщо Ви не бачите запрошення\n"
"завантажувача при завантаженні системи, натисніть Command-Option-O-F\n"
"при завантаженні і введіть setenv boot-device %s,\\\\:tbxi. Після\n"
"цього надрукуйте shut-down. При наступному завантаженні ви побачите\n"
"підказку завантажувача. "

#: install_steps_interactive.pm:1256
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"На цьому рівні безпеки доступ до файлів на розділі Windows дозволений тільки "
"адміністратору."

#: install_steps_interactive.pm:1288 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Вставте чисту дискету в дисковод %s"

#: install_steps_interactive.pm:1293
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Вставте системну дискету в дисковод %s"

#: install_steps_interactive.pm:1295
#, c-format
msgid "Creating auto install floppy..."
msgstr "Створення дискети для автоматичного встановлення..."

#: install_steps_interactive.pm:1307
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Деякі кроки не завершені.\n"
"\n"
"Ви дійсно хочете припинити зараз?"

#: install_steps_interactive.pm:1322
#, c-format
msgid "Generate auto install floppy"
msgstr "Створити дискету для автовстановлення"

#: install_steps_interactive.pm:1324
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Якщо потрібно, автовстановлення може бути повністю\n"
"автоматизоване. В цьому випадку процес встановлення \n"
"буде мати повний контроль над вашим диском!! (Застосовується\n"
"для встановлення на інші комп'ютери)\n"
"\n"
"Можливо, Ви захочете повторити встановлення.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr "Встановлення Mandrakelinux %s"

#: install_steps_newt.pm:33
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> між елементами | <Space> вибір | <F12> наступний екран"

#: interactive.pm:170
#, c-format
msgid "Choose a file"
msgstr "Виберіть файл"

#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr "Основний"

#: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:510
#, c-format
msgid "Finish"
msgstr "Закінчити"

#: interactive/newt.pm:83
#, c-format
msgid "Do"
msgstr "Виконати"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Невдалий вибір, спробуйте ще раз\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ваш вибір? (типово %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Пункти, які Вам потрібно заповнити:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Ваш вибір? (0/1, типово %s) "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Кнопка `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Ви хочете натиснути на цю кнопку?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Ваш вибір? (типовий %s %s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " введіть `void' для порожнього пункта"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Існує багато чого, щоб вибрати з (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Будь-ласка, виберіть перше число з 10-значного діапазону,\n"
"яке Ви хочете змінити, або просто натисніть Enter для продовження.\n"
"Ваш вибір?"

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Зауважте, мітка змінилася:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Ще раз відправити"

#: keyboard.pm:137 keyboard.pm:169
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Чеська (QWERTZ)"

#: keyboard.pm:138 keyboard.pm:171
#, c-format
msgid "German"
msgstr "Німецька"

#: keyboard.pm:139
#, c-format
msgid "Dvorak"
msgstr "Дворака"

#: keyboard.pm:140 keyboard.pm:179
#, c-format
msgid "Spanish"
msgstr "Іспанська"

#: keyboard.pm:141 keyboard.pm:180
#, c-format
msgid "Finnish"
msgstr "Фінська"

#: keyboard.pm:142 keyboard.pm:181
#, c-format
msgid "French"
msgstr "Французька"

#: keyboard.pm:143 keyboard.pm:220
#, c-format
msgid "Norwegian"
msgstr "Норвезька"

#: keyboard.pm:144
#, c-format
msgid "Polish"
msgstr "Польська"

#: keyboard.pm:145 keyboard.pm:229
#, c-format
msgid "Russian"
msgstr "Російська"

#: keyboard.pm:147 keyboard.pm:233
#, c-format
msgid "Swedish"
msgstr "Шведська"

#: keyboard.pm:148 keyboard.pm:252
#, c-format
msgid "UK keyboard"
msgstr "Британська клавіатура"

#: keyboard.pm:149 keyboard.pm:253
#, c-format
msgid "US keyboard"
msgstr "Клавіатура США"

#: keyboard.pm:151
#, c-format
msgid "Albanian"
msgstr "Албанська"

#: keyboard.pm:152
#, c-format
msgid "Armenian (old)"
msgstr "Вірменська (стара)"

#: keyboard.pm:153
#, c-format
msgid "Armenian (typewriter)"
msgstr "Вірменська (друкарська машинка)"

#: keyboard.pm:154
#, c-format
msgid "Armenian (phonetic)"
msgstr "Вірменська (фонетична)"

#: keyboard.pm:155
#, c-format
msgid "Arabic"
msgstr "Арабський"

#: keyboard.pm:156
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Азербайджанська (латина)"

#: keyboard.pm:158
#, c-format
msgid "Belgian"
msgstr "Бельгійська"

#: keyboard.pm:159
#, c-format
msgid "Bengali"
msgstr "Бенгальська"

#: keyboard.pm:160
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Болгарська (фонетична)"

#: keyboard.pm:161
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Болгарська (BDS)"

#: keyboard.pm:162
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Бразілійська (ABNT-2)"

#: keyboard.pm:165
#, c-format
msgid "Bosnian"
msgstr "Боснійська"

#: keyboard.pm:166
#, c-format
msgid "Belarusian"
msgstr "Білоруська"

#: keyboard.pm:167
#, c-format
msgid "Swiss (German layout)"
msgstr "Швейцарська (німецька розкладка)"

#: keyboard.pm:168
#, c-format
msgid "Swiss (French layout)"
msgstr "Швейцарська (французька розкладка)"

#: keyboard.pm:170
#, c-format
msgid "Czech (QWERTY)"
msgstr "Чеська (QWERTY)"

#: keyboard.pm:172
#, c-format
msgid "German (no dead keys)"
msgstr "Німецька (без мертвих клавіш)"

#: keyboard.pm:173
#, c-format
msgid "Devanagari"
msgstr "Деванагарі"

#: keyboard.pm:174
#, c-format
msgid "Danish"
msgstr "Датська"

#: keyboard.pm:175
#, c-format
msgid "Dvorak (US)"
msgstr "Дворака (США)"

#: keyboard.pm:176
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Дворака (Норвезька)"

#: keyboard.pm:177
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Дворака (Шведська)"

#: keyboard.pm:178
#, c-format
msgid "Estonian"
msgstr "Естонська"

#: keyboard.pm:182
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Грузинська (російська мапа)"

#: keyboard.pm:183
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Грузинська (латинська розкладка)"

#: keyboard.pm:184
#, c-format
msgid "Greek"
msgstr "Грецька"

#: keyboard.pm:185
#, c-format
msgid "Greek (polytonic)"
msgstr "Грецька (політонічна)"

#: keyboard.pm:186
#, c-format
msgid "Gujarati"
msgstr "Ґуджараті"

#: keyboard.pm:187
#, c-format
msgid "Gurmukhi"
msgstr "Ґурмухі"

#: keyboard.pm:188
#, c-format
msgid "Hungarian"
msgstr "Угорська"

#: keyboard.pm:189
#, c-format
msgid "Croatian"
msgstr "Хорватська"

#: keyboard.pm:190
#, c-format
msgid "Irish"
msgstr "Ірландська"

#: keyboard.pm:191
#, c-format
msgid "Israeli"
msgstr "Ізраїльська"

#: keyboard.pm:192
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Ізраїльська (фонетична)"

#: keyboard.pm:193
#, c-format
msgid "Iranian"
msgstr "Іранська"

#: keyboard.pm:194
#, c-format
msgid "Icelandic"
msgstr "Ісландська"

#: keyboard.pm:195
#, c-format
msgid "Italian"
msgstr "Італійська"

#: keyboard.pm:196
#, c-format
msgid "Inuktitut"
msgstr "Inuktitut"

#: keyboard.pm:200
#, c-format
msgid "Japanese 106 keys"
msgstr "Японська 106 клавіш"

#: keyboard.pm:201
#, c-format
msgid "Kannada"
msgstr "Каннада"

#: keyboard.pm:204
#, c-format
msgid "Korean keyboard"
msgstr "Корейська клавіатура"

#: keyboard.pm:205
#, c-format
msgid "Latin American"
msgstr "Латиноамериканська"

#: keyboard.pm:206
#, c-format
msgid "Laotian"
msgstr "Лаоська"

#: keyboard.pm:207
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Литовська AZERTY (стара)"

#: keyboard.pm:209
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Литовська AZERTY (нова)"

#: keyboard.pm:210
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Литовська \"цифровий ряд\" QWERTY"

#: keyboard.pm:211
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Литовська \"фонетична\" QWERTY"

#: keyboard.pm:212
#, c-format
msgid "Latvian"
msgstr "Латвійська"

#: keyboard.pm:213
#, c-format
msgid "Malayalam"
msgstr "Малайська"

#: keyboard.pm:214
#, c-format
msgid "Macedonian"
msgstr "Македонська"

#: keyboard.pm:215
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Мьянма (Бірманська)"

#: keyboard.pm:216
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Монгольська (кирилиця)"

#: keyboard.pm:217
#, c-format
msgid "Maltese (UK)"
msgstr "Мальтійська (UK)"

#: keyboard.pm:218
#, c-format
msgid "Maltese (US)"
msgstr "Мальтійська (US)"

#: keyboard.pm:219
#, c-format
msgid "Dutch"
msgstr "Голандська"

#: keyboard.pm:221
#, c-format
msgid "Oriya"
msgstr "Орія"

#: keyboard.pm:222
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Польська (розкладка qwerty)"

#: keyboard.pm:223
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Польська (розкладка qwertz)"

#: keyboard.pm:224
#, c-format
msgid "Portuguese"
msgstr "Португальська"

#: keyboard.pm:225
#, c-format
msgid "Canadian (Quebec)"
msgstr "Канадська (Квебек)"

#: keyboard.pm:227
#, c-format
msgid "Romanian (qwertz)"
msgstr "Румунська (qwertz)"

#: keyboard.pm:228
#, c-format
msgid "Romanian (qwerty)"
msgstr "Румунська (qwerty)"

#: keyboard.pm:230
#, c-format
msgid "Russian (Phonetic)"
msgstr "Російська (фонетична)"

#: keyboard.pm:231
#, c-format
msgid "Saami (norwegian)"
msgstr "Саамі (норвезька)"

#: keyboard.pm:232
#, c-format
msgid "Saami (swedish/finnish)"
msgstr "Saami (шведська/фінська)"

#: keyboard.pm:234
#, c-format
msgid "Slovenian"
msgstr "Словенська"

#: keyboard.pm:235
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Словацька (QWERTZ)"

#: keyboard.pm:236
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Словацька (QWERTY)"

#: keyboard.pm:238
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Сербська (кирилиця)"

#: keyboard.pm:239
#, c-format
msgid "Syriac"
msgstr "Сірійська"

#: keyboard.pm:240
#, c-format
msgid "Syriac (phonetic)"
msgstr "Сірійська (фонетична)"

#: keyboard.pm:241
#, c-format
msgid "Telugu"
msgstr "Телуґу"

#: keyboard.pm:243
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Тамільська (мапа ISCII)"

#: keyboard.pm:244
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Тамільська (машинописна мапа)"

#: keyboard.pm:245
#, c-format
msgid "Thai keyboard"
msgstr "Тайська клавіатура"

#: keyboard.pm:247
#, c-format
msgid "Tajik keyboard"
msgstr "Таджицька клавіатура"

#: keyboard.pm:248
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Турецька (традиційна \"F\" модель)"

#: keyboard.pm:249
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Турецька (традиційна \"Q\" модель)"

#: keyboard.pm:251
#, c-format
msgid "Ukrainian"
msgstr "Українська"

#: keyboard.pm:254
#, c-format
msgid "US keyboard (international)"
msgstr "Клавіатура США (міжнародна)"

#: keyboard.pm:255
#, c-format
msgid "Uzbek (cyrillic)"
msgstr "Узбецька (кирилиця)"

#: keyboard.pm:256
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "В'єтнамська \"цифровий ряд\" QWERTY"

#: keyboard.pm:257
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Югославська (латинська)"

#: keyboard.pm:264
#, c-format
msgid "Right Alt key"
msgstr "Права клавіша Alt"

#: keyboard.pm:265
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Обидві клавіші Shift одночасно"

#: keyboard.pm:266
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Клавіші Control і Shift одночасно"

#: keyboard.pm:267
#, c-format
msgid "CapsLock key"
msgstr "Клавіша CapsLock"

#: keyboard.pm:268
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Клавіші Ctrl і Alt одночасно"

#: keyboard.pm:269
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Клавіші Alt і Shift одночасно"

#: keyboard.pm:270
#, c-format
msgid "\"Menu\" key"
msgstr "Клавіша \"Меню\""

#: keyboard.pm:271
#, c-format
msgid "Left \"Windows\" key"
msgstr "Ліва клавіша \"Windows\""

#: keyboard.pm:272
#, c-format
msgid "Right \"Windows\" key"
msgstr "Права клавіша \"Windows\""

#: keyboard.pm:273
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Обидві клавіші Control одночасно"

#: keyboard.pm:274
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Обидві клавіші Alt одночасно"

#: keyboard.pm:275
#, c-format
msgid "Left Shift key"
msgstr "Ліва клавіша Shift"

#: keyboard.pm:276
#, c-format
msgid "Right Shift key"
msgstr "Права клавіша Shift"

#: keyboard.pm:277
#, c-format
msgid "Left Alt key"
msgstr "Ліва клавіша Alt"

#: keyboard.pm:278
#, c-format
msgid "Left Control key"
msgstr "Ліва клавіша Control"

#: keyboard.pm:279
#, c-format
msgid "Right Control key"
msgstr "Права клавіша Control"

#: keyboard.pm:310
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Тут Ви можете вибрати клавішу або комбінацію клавіш, якими Ви будете\n"
"перемикати різні розкладки клавіатури (наприклад, англійську і українську)"

#: keyboard.pm:315
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"Ці налаштування буде задіяно після встановлення.\n"
"Під час встановлення Вам потрібно буде використовувати праву\n"
"клавішу Control для перемикання між різними мапами клавіатури."

#: lang.pm:149
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:165
#, c-format
msgid "Afghanistan"
msgstr "Афганістан"

#: lang.pm:166
#, c-format
msgid "Andorra"
msgstr "Андорра"

#: lang.pm:167
#, c-format
msgid "United Arab Emirates"
msgstr "Об'єднані Арабські Емірати"

#: lang.pm:168
#, c-format
msgid "Antigua and Barbuda"
msgstr "Антигуа та Барбуда"

#: lang.pm:169
#, c-format
msgid "Anguilla"
msgstr "Ангілья"

#: lang.pm:170
#, c-format
msgid "Albania"
msgstr "Албанія"

#: lang.pm:171
#, c-format
msgid "Armenia"
msgstr "Вірменія"

#: lang.pm:172
#, c-format
msgid "Netherlands Antilles"
msgstr "Голандські Антильські острови"

#: lang.pm:173
#, c-format
msgid "Angola"
msgstr "Ангола"

#: lang.pm:174
#, c-format
msgid "Antarctica"
msgstr "Антарктика"

#: lang.pm:175 standalone/drakxtv:51
#, c-format
msgid "Argentina"
msgstr "Аргентина"

#: lang.pm:176
#, c-format
msgid "American Samoa"
msgstr "Американське Самоа"

#: lang.pm:178 network/adsl_consts.pm:20 standalone/drakxtv:49
#, c-format
msgid "Australia"
msgstr "Австралія"

#: lang.pm:179
#, c-format
msgid "Aruba"
msgstr "Аруба"

#: lang.pm:180
#, c-format
msgid "Azerbaijan"
msgstr "Азербайджан"

#: lang.pm:181
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Боснія та Герцеговина"

#: lang.pm:182
#, c-format
msgid "Barbados"
msgstr "Барбадос"

#: lang.pm:183
#, c-format
msgid "Bangladesh"
msgstr "Бангладеш"

#: lang.pm:185
#, c-format
msgid "Burkina Faso"
msgstr "Буркіна-Фасо"

#: lang.pm:186
#, c-format
msgid "Bulgaria"
msgstr "Болгарія"

#: lang.pm:187
#, c-format
msgid "Bahrain"
msgstr "Бахрейн"

#: lang.pm:188
#, c-format
msgid "Burundi"
msgstr "Бурунді"

#: lang.pm:189
#, c-format
msgid "Benin"
msgstr "Бенін"

#: lang.pm:190
#, c-format
msgid "Bermuda"
msgstr "Бермуди"

#: lang.pm:191
#, c-format
msgid "Brunei Darussalam"
msgstr "Брунейський Даруссалам"

#: lang.pm:192
#, c-format
msgid "Bolivia"
msgstr "Болівія"

#: lang.pm:193
#, c-format
msgid "Brazil"
msgstr "Бразилія"

#: lang.pm:194
#, c-format
msgid "Bahamas"
msgstr "Багами"

#: lang.pm:195
#, c-format
msgid "Bhutan"
msgstr "Бутан"

#: lang.pm:196
#, c-format
msgid "Bouvet Island"
msgstr "Острів Буве"

#: lang.pm:197
#, c-format
msgid "Botswana"
msgstr "Ботсвана"

#: lang.pm:198
#, c-format
msgid "Belarus"
msgstr "Білорусь"

#: lang.pm:199
#, c-format
msgid "Belize"
msgstr "Беліз"

#: lang.pm:200
#, c-format
msgid "Canada"
msgstr "Канада"

#: lang.pm:201
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Кокосові острови"

#: lang.pm:202
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Конго (Кіншаса)"

#: lang.pm:203
#, c-format
msgid "Central African Republic"
msgstr "Центрально-Африканська Республіка"

#: lang.pm:204
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Конго (Браззавіль)"

#: lang.pm:205
#, c-format
msgid "Switzerland"
msgstr "Швейцарія"

#: lang.pm:206
#, c-format
msgid "Cote d'Ivoire"
msgstr "Кот д'Івуар"

#: lang.pm:207
#, c-format
msgid "Cook Islands"
msgstr "Острови Кука"

#: lang.pm:208
#, c-format
msgid "Chile"
msgstr "Чілі"

#: lang.pm:209
#, c-format
msgid "Cameroon"
msgstr "Камерун"

#: lang.pm:210
#, c-format
msgid "China"
msgstr "Китай"

#: lang.pm:211
#, c-format
msgid "Colombia"
msgstr "Колумбія"

#: lang.pm:213
#, c-format
msgid "Cuba"
msgstr "Куба"

#: lang.pm:214
#, c-format
msgid "Cape Verde"
msgstr "Острови Зеленого Мису"

#: lang.pm:215
#, c-format
msgid "Christmas Island"
msgstr "Острів Різдва"

#: lang.pm:216
#, c-format
msgid "Cyprus"
msgstr "Кіпр"

#: lang.pm:219
#, c-format
msgid "Djibouti"
msgstr "Джибуті"

#: lang.pm:220
#, c-format
msgid "Denmark"
msgstr "Данія"

#: lang.pm:221
#, c-format
msgid "Dominica"
msgstr "Домініка"

#: lang.pm:222
#, c-format
msgid "Dominican Republic"
msgstr "Домініканська Республіка"

#: lang.pm:223
#, c-format
msgid "Algeria"
msgstr "Алжир"

#: lang.pm:224
#, c-format
msgid "Ecuador"
msgstr "Еквадор"

#: lang.pm:225
#, c-format
msgid "Estonia"
msgstr "Естонія"

#: lang.pm:226
#, c-format
msgid "Egypt"
msgstr "Єгипет"

#: lang.pm:227
#, c-format
msgid "Western Sahara"
msgstr "Західна Сахара"

#: lang.pm:228
#, c-format
msgid "Eritrea"
msgstr "Еритрея"

#: lang.pm:229 network/adsl_consts.pm:202 network/adsl_consts.pm:210
#: network/adsl_consts.pm:219 network/adsl_consts.pm:230
#, c-format
msgid "Spain"
msgstr "Іспанія"

#: lang.pm:230
#, c-format
msgid "Ethiopia"
msgstr "Ефіопія"

#: lang.pm:231 network/adsl_consts.pm:127
#, c-format
msgid "Finland"
msgstr "Фінляндія"

#: lang.pm:232
#, c-format
msgid "Fiji"
msgstr "Фіджі"

#: lang.pm:233
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Фолклендські острови (Мальвінські)"

#: lang.pm:234
#, c-format
msgid "Micronesia"
msgstr "Мікронезія"

#: lang.pm:235
#, c-format
msgid "Faroe Islands"
msgstr "Фарерські острови"

#: lang.pm:237
#, c-format
msgid "Gabon"
msgstr "Ґабон"

#: lang.pm:238 network/adsl_consts.pm:247 network/adsl_consts.pm:255
#: network/netconnect.pm:51
#, c-format
msgid "United Kingdom"
msgstr "Об'єднане Королівство"

#: lang.pm:239
#, c-format
msgid "Grenada"
msgstr "Ґренада"

#: lang.pm:240
#, c-format
msgid "Georgia"
msgstr "Грузія"

#: lang.pm:241
#, c-format
msgid "French Guiana"
msgstr "Французька Ґаяна"

#: lang.pm:242
#, c-format
msgid "Ghana"
msgstr "Ґана"

#: lang.pm:243
#, c-format
msgid "Gibraltar"
msgstr "Ґібралтар"

#: lang.pm:244
#, c-format
msgid "Greenland"
msgstr "Ґренландія"

#: lang.pm:245
#, c-format
msgid "Gambia"
msgstr "Ґамбія"

#: lang.pm:246
#, c-format
msgid "Guinea"
msgstr "Ґвінея"

#: lang.pm:247
#, c-format
msgid "Guadeloupe"
msgstr "Ґваделупа"

#: lang.pm:248
#, c-format
msgid "Equatorial Guinea"
msgstr "Екваторіальна Гвінея"

#: lang.pm:250
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Південна Джорджія і Південні Сандвічські острови"

#: lang.pm:251
#, c-format
msgid "Guatemala"
msgstr "Ґватемала"

#: lang.pm:252
#, c-format
msgid "Guam"
msgstr "Ґуам"

#: lang.pm:253
#, c-format
msgid "Guinea-Bissau"
msgstr "Гвінея-Бісау"

#: lang.pm:254
#, c-format
msgid "Guyana"
msgstr "Ґаяна"

#: lang.pm:255
#, fuzzy, c-format
msgid "China (Hong Kong)"
msgstr "Гонґ-Конґ"

#: lang.pm:256
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Хердські і МакДональдські острови"

#: lang.pm:257
#, c-format
msgid "Honduras"
msgstr "Гондурас"

#: lang.pm:258
#, c-format
msgid "Croatia"
msgstr "Хорватія"

#: lang.pm:259
#, c-format
msgid "Haiti"
msgstr "Гаїті"

#: lang.pm:260 network/adsl_consts.pm:152
#, c-format
msgid "Hungary"
msgstr "Угорщина"

#: lang.pm:261
#, c-format
msgid "Indonesia"
msgstr "Індонезія"

#: lang.pm:262 standalone/drakxtv:48
#, c-format
msgid "Ireland"
msgstr "Ірландія"

#: lang.pm:263
#, c-format
msgid "Israel"
msgstr "Ізраїль"

#: lang.pm:264
#, c-format
msgid "India"
msgstr "Індія"

#: lang.pm:265
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Британська територія в Індійському океані"

#: lang.pm:266
#, c-format
msgid "Iraq"
msgstr "Ірак"

#: lang.pm:267
#, c-format
msgid "Iran"
msgstr "Іран"

#: lang.pm:268
#, c-format
msgid "Iceland"
msgstr "Ісландія"

#: lang.pm:270
#, c-format
msgid "Jamaica"
msgstr "Ямайка"

#: lang.pm:271
#, c-format
msgid "Jordan"
msgstr "Йорданія"

#: lang.pm:272
#, c-format
msgid "Japan"
msgstr "Японія"

#: lang.pm:273
#, c-format
msgid "Kenya"
msgstr "Кенія"

#: lang.pm:274
#, c-format
msgid "Kyrgyzstan"
msgstr "Киргизстан"

#: lang.pm:275
#, c-format
msgid "Cambodia"
msgstr "Камбоджа"

#: lang.pm:276
#, c-format
msgid "Kiribati"
msgstr "Кірібаті"

#: lang.pm:277
#, c-format
msgid "Comoros"
msgstr "Коморські острови"

#: lang.pm:278
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Св. Кітс і Невіс"

#: lang.pm:279
#, c-format
msgid "Korea (North)"
msgstr "Корея (Північ)"

#: lang.pm:280
#, c-format
msgid "Korea"
msgstr "Корея"

#: lang.pm:281
#, c-format
msgid "Kuwait"
msgstr "Кувейт"

#: lang.pm:282
#, c-format
msgid "Cayman Islands"
msgstr "Кайманські острови"

#: lang.pm:283
#, c-format
msgid "Kazakhstan"
msgstr "Казахстан"

#: lang.pm:284
#, c-format
msgid "Laos"
msgstr "Лаос"

#: lang.pm:285
#, c-format
msgid "Lebanon"
msgstr "Ліван"

#: lang.pm:286
#, c-format
msgid "Saint Lucia"
msgstr "Санта-Лючія"

#: lang.pm:287
#, c-format
msgid "Liechtenstein"
msgstr "Ліхтенштейн"

#: lang.pm:288
#, c-format
msgid "Sri Lanka"
msgstr "Шрі Ланка"

#: lang.pm:289
#, c-format
msgid "Liberia"
msgstr "Ліберія"

#: lang.pm:290
#, c-format
msgid "Lesotho"
msgstr "Лесото"

#: lang.pm:291
#, c-format
msgid "Lithuania"
msgstr "Литва"

#: lang.pm:292
#, c-format
msgid "Luxembourg"
msgstr "Люксембург"

#: lang.pm:293
#, c-format
msgid "Latvia"
msgstr "Латвія"

#: lang.pm:294
#, c-format
msgid "Libya"
msgstr "Лівія"

#: lang.pm:295
#, c-format
msgid "Morocco"
msgstr "Марокко"

#: lang.pm:296
#, c-format
msgid "Monaco"
msgstr "Монако"

#: lang.pm:297
#, c-format
msgid "Moldova"
msgstr "Молдавія"

#: lang.pm:298
#, c-format
msgid "Madagascar"
msgstr "Мадагаскар"

#: lang.pm:299
#, c-format
msgid "Marshall Islands"
msgstr "Маршалові острови"

#: lang.pm:300
#, c-format
msgid "Macedonia"
msgstr "Македонія"

#: lang.pm:301
#, c-format
msgid "Mali"
msgstr "Малі"

#: lang.pm:302
#, c-format
msgid "Myanmar"
msgstr "М'янма"

#: lang.pm:303
#, c-format
msgid "Mongolia"
msgstr "Монголія"

#: lang.pm:304
#, c-format
msgid "Northern Mariana Islands"
msgstr "Північні Маріанські острови"

#: lang.pm:305
#, c-format
msgid "Martinique"
msgstr "Мартініка"

#: lang.pm:306
#, c-format
msgid "Mauritania"
msgstr "Мавританія"

#: lang.pm:307
#, c-format
msgid "Montserrat"
msgstr "Монсеррат"

#: lang.pm:308
#, c-format
msgid "Malta"
msgstr "Мальта"

#: lang.pm:309
#, c-format
msgid "Mauritius"
msgstr "Маврикій"

#: lang.pm:310
#, c-format
msgid "Maldives"
msgstr "Мальдіви"

#: lang.pm:311
#, c-format
msgid "Malawi"
msgstr "Малаві"

#: lang.pm:312
#, c-format
msgid "Mexico"
msgstr "Мексика"

#: lang.pm:313
#, c-format
msgid "Malaysia"
msgstr "Малайзія"

#: lang.pm:314
#, c-format
msgid "Mozambique"
msgstr "Мозамбік"

#: lang.pm:315
#, c-format
msgid "Namibia"
msgstr "Намібія"

#: lang.pm:316
#, c-format
msgid "New Caledonia"
msgstr "Нова Каледонія"

#: lang.pm:317
#, c-format
msgid "Niger"
msgstr "Нігер"

#: lang.pm:318
#, c-format
msgid "Norfolk Island"
msgstr "Норфолкські острови"

#: lang.pm:319
#, c-format
msgid "Nigeria"
msgstr "Нігерія"

#: lang.pm:320
#, c-format
msgid "Nicaragua"
msgstr "Нікарагуа"

#: lang.pm:323
#, c-format
msgid "Nepal"
msgstr "Непал"

#: lang.pm:324
#, c-format
msgid "Nauru"
msgstr "Науру"

#: lang.pm:325
#, c-format
msgid "Niue"
msgstr "Ніуе"

#: lang.pm:326
#, c-format
msgid "New Zealand"
msgstr "Нова Зеландія"

#: lang.pm:327
#, c-format
msgid "Oman"
msgstr "Оман"

#: lang.pm:328
#, c-format
msgid "Panama"
msgstr "Панама"

#: lang.pm:329
#, c-format
msgid "Peru"
msgstr "Перу"

#: lang.pm:330
#, c-format
msgid "French Polynesia"
msgstr "Французька Полінезія"

#: lang.pm:331
#, c-format
msgid "Papua New Guinea"
msgstr "Папуа Нова Гвінея"

#: lang.pm:332
#, c-format
msgid "Philippines"
msgstr "Філіппіни"

#: lang.pm:333
#, c-format
msgid "Pakistan"
msgstr "Пакістан"

#: lang.pm:334 network/adsl_consts.pm:186
#, c-format
msgid "Poland"
msgstr "Польща"

#: lang.pm:335
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Св. П'єр і Мікелон"

#: lang.pm:336
#, c-format
msgid "Pitcairn"
msgstr "Піткерн"

#: lang.pm:337
#, c-format
msgid "Puerto Rico"
msgstr "Пуерто-Ріко"

#: lang.pm:338
#, c-format
msgid "Palestine"
msgstr "Палестина"

#: lang.pm:339 network/adsl_consts.pm:196
#, c-format
msgid "Portugal"
msgstr "Португалія"

#: lang.pm:340
#, c-format
msgid "Paraguay"
msgstr "Парагвай"

#: lang.pm:341
#, c-format
msgid "Palau"
msgstr "Палау"

#: lang.pm:342
#, c-format
msgid "Qatar"
msgstr "Катар"

#: lang.pm:343
#, c-format
msgid "Reunion"
msgstr "Реюніон"

#: lang.pm:344
#, c-format
msgid "Romania"
msgstr "Румунія"

#: lang.pm:345
#, c-format
msgid "Russia"
msgstr "Росія"

#: lang.pm:346
#, c-format
msgid "Rwanda"
msgstr "Руанда"

#: lang.pm:347
#, c-format
msgid "Saudi Arabia"
msgstr "Саудівська Аравія"

#: lang.pm:348
#, c-format
msgid "Solomon Islands"
msgstr "Соломонові острови"

#: lang.pm:349
#, c-format
msgid "Seychelles"
msgstr "Сейшельські острови"

#: lang.pm:350
#, c-format
msgid "Sudan"
msgstr "Судан"

#: lang.pm:352
#, c-format
msgid "Singapore"
msgstr "Сінгапур"

#: lang.pm:353
#, c-format
msgid "Saint Helena"
msgstr "Свята Гелена"

#: lang.pm:354
#, c-format
msgid "Slovenia"
msgstr "Словенія"

#: lang.pm:355
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Острови Свальбард і Ян Майєн"

#: lang.pm:356
#, c-format
msgid "Slovakia"
msgstr "Словаччина"

#: lang.pm:357
#, c-format
msgid "Sierra Leone"
msgstr "Сьєрра-Леоне"

#: lang.pm:358
#, c-format
msgid "San Marino"
msgstr "Сан Маріно"

#: lang.pm:359
#, c-format
msgid "Senegal"
msgstr "Сенегал"

#: lang.pm:360
#, c-format
msgid "Somalia"
msgstr "Сомалі"

#: lang.pm:361
#, c-format
msgid "Suriname"
msgstr "Сурінам"

#: lang.pm:362
#, c-format
msgid "Sao Tome and Principe"
msgstr "Сан-Томе і Прінсіпі"

#: lang.pm:363
#, c-format
msgid "El Salvador"
msgstr "Сальвадор"

#: lang.pm:364
#, c-format
msgid "Syria"
msgstr "Сірія"

#: lang.pm:365
#, c-format
msgid "Swaziland"
msgstr "Свазіленд"

#: lang.pm:366
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Острови Туркс і Кайкос"

#: lang.pm:367
#, c-format
msgid "Chad"
msgstr "Чад"

#: lang.pm:368
#, c-format
msgid "French Southern Territories"
msgstr "Французькі Південні Території"

#: lang.pm:369
#, c-format
msgid "Togo"
msgstr "Тоґо"

#: lang.pm:370
#, c-format
msgid "Thailand"
msgstr "Таїланд"

#: lang.pm:371
#, c-format
msgid "Tajikistan"
msgstr "Таджикістан"

#: lang.pm:372
#, c-format
msgid "Tokelau"
msgstr "Токелау"

#: lang.pm:373
#, c-format
msgid "East Timor"
msgstr "Східний Тімор"

#: lang.pm:374
#, c-format
msgid "Turkmenistan"
msgstr "Туркменістан"

#: lang.pm:375
#, c-format
msgid "Tunisia"
msgstr "Туніс"

#: lang.pm:376
#, c-format
msgid "Tonga"
msgstr "Тонга"

#: lang.pm:377
#, c-format
msgid "Turkey"
msgstr "Туреччина"

#: lang.pm:378
#, c-format
msgid "Trinidad and Tobago"
msgstr "Трінідад і Тобаго"

#: lang.pm:379
#, c-format
msgid "Tuvalu"
msgstr "Тувалу"

#: lang.pm:380
#, c-format
msgid "Taiwan"
msgstr "Тайвань"

#: lang.pm:381
#, c-format
msgid "Tanzania"
msgstr "Танзанія"

#: lang.pm:382
#, c-format
msgid "Ukraine"
msgstr "Україна"

#: lang.pm:383
#, c-format
msgid "Uganda"
msgstr "Уганда"

#: lang.pm:384
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Острови Сполучених Штатів Америки"

#: lang.pm:386
#, c-format
msgid "Uruguay"
msgstr "Уругвай"

#: lang.pm:387
#, c-format
msgid "Uzbekistan"
msgstr "Узбекистан"

#: lang.pm:388
#, c-format
msgid "Vatican"
msgstr "Ватикан"

#: lang.pm:389
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Св. Вінсент і Гренадінз"

#: lang.pm:390
#, c-format
msgid "Venezuela"
msgstr "Венесуела"

#: lang.pm:391
#, c-format
msgid "Virgin Islands (British)"
msgstr "Віргінські острови (Британія)"

#: lang.pm:392
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Віргінські острови (США)"

#: lang.pm:393
#, c-format
msgid "Vietnam"
msgstr "В'єтнам"

#: lang.pm:394
#, c-format
msgid "Vanuatu"
msgstr "Вануату"

#: lang.pm:395
#, c-format
msgid "Wallis and Futuna"
msgstr "Валліс і Футунські острови"

#: lang.pm:396
#, c-format
msgid "Samoa"
msgstr "Самоа"

#: lang.pm:397
#, c-format
msgid "Yemen"
msgstr "Ємен"

#: lang.pm:398
#, c-format
msgid "Mayotte"
msgstr "Майотт"

#: lang.pm:399
#, c-format
msgid "Serbia & Montenegro"
msgstr "Сербія і Монтенегро"

#: lang.pm:400 standalone/drakxtv:50
#, c-format
msgid "South Africa"
msgstr "Південа Африка"

#: lang.pm:401
#, c-format
msgid "Zambia"
msgstr "Замбія"

#: lang.pm:402
#, c-format
msgid "Zimbabwe"
msgstr "Зімбабве"

#: lang.pm:983
#, c-format
msgid "Welcome to %s"
msgstr "Ласкаво просимо до %s"

#: loopback.pm:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Замикаюче монтування %s\n"

#: lvm.pm:115
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Спочатку зітріть логічні томи\n"

#: modules/interactive.pm:21 standalone/drakconnect:959
#, c-format
msgid "Parameters"
msgstr "Параметри"

#: modules/interactive.pm:21 standalone/draksec:44
#, c-format
msgid "NONE"
msgstr "НІЧОГО"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Налаштування модулів"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Тут Ви можете налаштувати кожен параметр модуля."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s %s interfaces"
msgstr "Знайдені інтерфейси %s %s"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Чи Ви маєте інші?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Чи Ви маєте які-небуть %s інтерфейси?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Перегляньте інформацію про апаратне забезпечення"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:87
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Встановлюю драйвер для %s плати %s"

#: modules/interactive.pm:87
#, c-format
msgid "(module %s)"
msgstr "(модуль %s)"

#: modules/interactive.pm:98
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Тепер Ви можете передати параметри в модуль %s.\n"
"Зауважте, що будь-які адреси повинні вводитися с префіксом 0x, напр., '0z123'"

#: modules/interactive.pm:104
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Ви можете тепер передати параметри в модуль %s.\n"
"Параметри мають формат ``назва=величина назва2=величина2 ...''.\n"
"Наприклад, ``io=0x300 irq=7''"

#: modules/interactive.pm:106
#, c-format
msgid "Module options:"
msgstr "Параметри модуля:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:118
#, c-format
msgid "Which %s driver should I try?"
msgstr "Який драйвер %s мені спробувати?"

#: modules/interactive.pm:127
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"В деяких випадках драйвер %s вимагає додаткової інформації для того,\n"
"щоб вірно працювати, хоча звичайно працює нормально без неї. Чи не\n"
"хотіли б Ви вказати додаткові параметри для нього чи дозволити драйверу\n"
"протестувати Вашу систему, щоб знайти потрібну інформацію? Інколи таке\n"
"тестування може призвести до зависання комп'ютера, але не повинно\n"
"зашкодити йому."

#: modules/interactive.pm:131
#, c-format
msgid "Autoprobe"
msgstr "Автотест"

#: modules/interactive.pm:131
#, c-format
msgid "Specify options"
msgstr "Вкажіть параметри"

#: modules/interactive.pm:143
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Завантаження модуля %s неуспішне.\n"
"Хочете спробувати інші параметри?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "число"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d чисел, розділених комами"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d розділених комою рядків"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "розділені комою числа"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "розділені комою рядки"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Миша Sun"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Стандартний"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Звичайна миша PS2 з коліщатком"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/modem.pm:58 network/modem.pm:72 network/modem.pm:77
#: network/modem.pm:108 network/netconnect.pm:574 network/netconnect.pm:579
#: network/netconnect.pm:591 network/netconnect.pm:596
#: network/netconnect.pm:612 network/netconnect.pm:614
#, fuzzy, c-format
msgid "Automatic"
msgstr "Автоматична IP"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 кнопка"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Звичайна 2-х кнопкова миша"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Звичайна 3х кнопкова миша з емуляцією коліщатка"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Коліщатко"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "послідовний"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Звичайна 3х кнопкова миша"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan з емуляцією коліщатка"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Серія Logitech CC"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Типу Logitech CC з емуляцією коліщатка"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "Серія MM"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Миша Logitech (послідовна, старий тип C7)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (serial, тип C7) з емуляцією коліщатка"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse з емуляцією коліщатка"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "Дві кнопки"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "Трьох кнопочна"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 кнопки з емуляцією коліщатка"

#: mouse.pm:86
#, fuzzy, c-format
msgid "Universal"
msgstr "Завершення видалення"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "Будь яка миша PS/2 та USB"

#: mouse.pm:92 standalone/drakvpn:1138
#, c-format
msgid "none"
msgstr "нічого"

#: mouse.pm:94
#, c-format
msgid "No mouse"
msgstr "Немає миші"

#: mouse.pm:515
#, c-format
msgid "Please test the mouse"
msgstr "Випробуйте мишу, будь-ласка"

#: mouse.pm:517
#, c-format
msgid "To activate the mouse,"
msgstr "Щоб активізувати мишу, "

#: mouse.pm:518
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "ПОСУНЬТЕ КОЛІЩАТКО!"

#: network/adsl.pm:19
#, c-format
msgid "use pppoe"
msgstr "використовувати pppoe"

#: network/adsl.pm:20
#, c-format
msgid "use pptp"
msgstr "використовувати pptp"

#: network/adsl.pm:21
#, c-format
msgid "use dhcp"
msgstr "користуватися dhcp"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
msgid " - detected"
msgstr "знайдено"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (використовуючи pppoa) usb"

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr "Sagem (використовуючи dhcp) usb"

#: network/adsl.pm:35 network/netconnect.pm:754
#, c-format
msgid "Connect to the Internet"
msgstr "З'єднатися з інтернетом"

#: network/adsl.pm:36 network/netconnect.pm:755
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Найбільш поширений спосіб з'єднання через adsl - це за допомогою\n"
"pppoe. Однак, деякі з'єднання користуються тільки pptp, невелика\n"
"кількість користується dhcp. Якщо Ви не знаєте напевне, виберіть\n"
"\"використовувати pppoe\"."

#: network/adsl.pm:41 network/netconnect.pm:759
#, fuzzy, c-format
msgid "ADSL connection type :"
msgstr "З'єднання ADSL"

#: network/drakfirewall.pm:12
#, c-format
msgid "Web Server"
msgstr "Веб-сервер"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Сервер назв домена"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "Сервер SSH "

#: network/drakfirewall.pm:27
#, fuzzy, c-format
msgid "FTP server"
msgstr "Сервер NTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Поштовий сервер"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "Сервери POP і IMAP"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X сервер"

#: network/drakfirewall.pm:48
#, fuzzy, c-format
msgid "Samba server"
msgstr "Сервер Samba"

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "Сервер DNS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "Запит зв'язку (ping)"

#: network/drakfirewall.pm:125
#, c-format
msgid "No network card"
msgstr "Немає мережевої плати"

#: network/drakfirewall.pm:146
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"Конфігуратор захисного шлюза\n"
"\n"
"Це налаштовує персонального захисного шлюза для цієї машини з Лінакс\n"
"Мандрейк. Для того, щоб встановити більш потужного інтелектуального\n"
"захисного шлюза, зверніться, будь ласка, до спеціалізованого\n"
"дистрибутива MandrakeSecurity Firewall."

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"Конфігуратор drakfirewall\n"
"\n"
"Перед тим, як робити щось далі, переконайтеся, що Ви налаштували\n"
"доступ до Network/Internet з допомогою drakconnect."

#: network/drakfirewall.pm:169
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Яким службам Ви б хотіли дозволити з'єднання з інтернетом?"

#: network/drakfirewall.pm:170
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Ви можете ввести різні порти.\n"
"Правильні приклади: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Інформацію можна знайти в /etc/services."

#: network/drakfirewall.pm:176
#, fuzzy, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Вказано неправильний порт: %s.\n"
"Правильний формат - \"порт/tcp\" або \"порт/udp\",\n"
"де порт повинен бути між 1 і 65535."

#: network/drakfirewall.pm:186
#, c-format
msgid "Everything (no firewall)"
msgstr "Все (захисного шлюза немає)"

#: network/drakfirewall.pm:188
#, c-format
msgid "Other ports"
msgstr "Інші порти"

#: network/isdn.pm:113 network/netconnect.pm:424
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:156 network/netconnect.pm:376
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:156 network/netconnect.pm:376
#, c-format
msgid "I don't know"
msgstr "Не знаю"

#: network/isdn.pm:157 network/netconnect.pm:376
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:158 network/netconnect.pm:376
#, fuzzy, c-format
msgid "USB"
msgstr "LSB"

#: network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/netconnect.pm:579 network/netconnect.pm:596
#: network/netconnect.pm:612
#, fuzzy, c-format
msgid "Manual"
msgstr "вручну"

#: network/netconnect.pm:88 network/netconnect.pm:453
#: network/netconnect.pm:463 network/netconnect.pm:822
#: network/netconnect.pm:827
#, fuzzy, c-format
msgid "Manual choice"
msgstr "вручну"

#: network/netconnect.pm:88
#, c-format
msgid "Internal ISDN card"
msgstr "Внутрішня плата ISDN"

#: network/netconnect.pm:97
#, c-format
msgid "Ad-hoc"
msgstr "Ad-hoc"

#: network/netconnect.pm:98
#, fuzzy, c-format
msgid "Managed"
msgstr "Мова"

#: network/netconnect.pm:99
#, fuzzy, c-format
msgid "Master"
msgstr "Майотт"

#: network/netconnect.pm:100
#, fuzzy, c-format
msgid "Repeater"
msgstr "Відновити"

#: network/netconnect.pm:101
#, fuzzy, c-format
msgid "Secondary"
msgstr "вторинний"

#: network/netconnect.pm:102
#, fuzzy, c-format
msgid "Auto"
msgstr "Про"

#: network/netconnect.pm:105 printer/printerdrake.pm:1133
#: standalone/drakups:64
#, c-format
msgid "Manual configuration"
msgstr "Налаштування вручну"

#: network/netconnect.pm:106
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "Автоматична IP"

#: network/netconnect.pm:108
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "Автоматичний IP (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:111
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Протокол для всього іншого світу"

#: network/netconnect.pm:113 standalone/drakconnect:528
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Європейський протокол (EDSS1)"

#: network/netconnect.pm:114 standalone/drakconnect:529
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Протокол для всього іншого світу \n"
" без D-каналу (виділених ліній)"

#: network/netconnect.pm:146
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch usb"

#: network/netconnect.pm:147
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "Системний режим"

#: network/netconnect.pm:148
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:149
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "Hi-Focus модем ECI"

#: network/netconnect.pm:153
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Протокол динамічної конфігурації клієнта (DHCP)"

#: network/netconnect.pm:154
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "Налаштування вручну"

#: network/netconnect.pm:155
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "Протокол тунелю точка-до-точки (PPTP)"

#: network/netconnect.pm:156
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP через Ethernet (PPoE)"

#: network/netconnect.pm:157
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP через ATM (PPoA)"

#: network/netconnect.pm:161
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Плата Ethernet"

#: network/netconnect.pm:162
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Плата Ethernet"

#: network/netconnect.pm:163
#, c-format
msgid "Routed IP LLC"
msgstr "Маршрутизований IP LLC"

#: network/netconnect.pm:164
#, c-format
msgid "Routed IP VC"
msgstr "Маршрутизований IP VC"

#: network/netconnect.pm:165
#, c-format
msgid "PPPOA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:166
#, c-format
msgid "PPPOA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:170 standalone/drakconnect:466
#, c-format
msgid "Script-based"
msgstr "На основі скрипта"

#: network/netconnect.pm:171 standalone/drakconnect:466
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:172 standalone/drakconnect:466
#, c-format
msgid "Terminal-based"
msgstr "На основі термінала"

#: network/netconnect.pm:173 standalone/drakconnect:466
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:174 standalone/drakconnect:466
#, fuzzy, c-format
msgid "PAP/CHAP"
msgstr "CHAP"

#: network/netconnect.pm:219 standalone/drakconnect:55
#, c-format
msgid "Network & Internet Configuration"
msgstr "Конфігурація мережі і інтернету"

#: network/netconnect.pm:225
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "знайдено на порту %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:227
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "знайдено %s"

#: network/netconnect.pm:227
#, fuzzy, c-format
msgid "(detected)"
msgstr "знайдено"

#: network/netconnect.pm:229
#, fuzzy, c-format
msgid "Modem connection"
msgstr "З'єднання по вінмодему"

#: network/netconnect.pm:230
#, c-format
msgid "ISDN connection"
msgstr "З'єднання ISDN"

#: network/netconnect.pm:231
#, c-format
msgid "ADSL connection"
msgstr "З'єднання ADSL"

#: network/netconnect.pm:232
#, c-format
msgid "Cable connection"
msgstr "Кабельне з'єднання"

#: network/netconnect.pm:233
#, c-format
msgid "LAN connection"
msgstr "З'єднання через місцеву мережу"

#: network/netconnect.pm:234 network/netconnect.pm:248
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "Кабельне з'єднання"

#: network/netconnect.pm:244
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Виберіть з'єднання, яке Ви хочете налаштувати"

#: network/netconnect.pm:261
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"Зараз буде сконфіґуровано з'єднання %s.\n"
"\n"
"\n"
"Натисніть \"%s\" для продовження"

#: network/netconnect.pm:269 network/netconnect.pm:781
#, c-format
msgid "Connection Configuration"
msgstr "Конфігурація з'єднання"

#: network/netconnect.pm:270 network/netconnect.pm:782
#, c-format
msgid "Please fill or check the field below"
msgstr "Будь-ласка, заповніть або виберіть поле внизу"

#: network/netconnect.pm:277 standalone/drakconnect:519
#, c-format
msgid "Card IRQ"
msgstr "Перепин картки"

#: network/netconnect.pm:278 standalone/drakconnect:520
#, c-format
msgid "Card mem (DMA)"
msgstr "Пам'ять картки (DMA)"

#: network/netconnect.pm:279 standalone/drakconnect:521
#, c-format
msgid "Card IO"
msgstr "В/В картки"

#: network/netconnect.pm:280 standalone/drakconnect:522
#, c-format
msgid "Card IO_0"
msgstr "В/В_0 картки"

#: network/netconnect.pm:281
#, c-format
msgid "Card IO_1"
msgstr "В/В_1 картки"

#: network/netconnect.pm:282
#, c-format
msgid "Your personal phone number"
msgstr "Ваш особистий номер телефону"

#: network/netconnect.pm:283 network/netconnect.pm:785
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Назва провайдера (тобто provider.net)"

#: network/netconnect.pm:284 standalone/drakconnect:463
#, c-format
msgid "Provider phone number"
msgstr "Номер телефону провайдера"

#: network/netconnect.pm:285
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "1й DNS провайдера (необов'язково)"

#: network/netconnect.pm:286
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "2й DNS провайдера (необов'язково)"

#: network/netconnect.pm:287 standalone/drakconnect:419
#, c-format
msgid "Dialing mode"
msgstr "Режим зв'язку через модем"

#: network/netconnect.pm:288 standalone/drakconnect:424
#: standalone/drakconnect:484
#, c-format
msgid "Connection speed"
msgstr "Швидкість з'єднання"

#: network/netconnect.pm:289 standalone/drakconnect:429
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Затримка перед закриттям зв'язку (сек)"

#: network/netconnect.pm:292 network/netconnect.pm:788
#: standalone/drakconnect:461
#, c-format
msgid "Account Login (user name)"
msgstr "Рахунок користувача (ім'я користувача)"

#: network/netconnect.pm:293 network/netconnect.pm:789
#: standalone/drakconnect:462
#, c-format
msgid "Account Password"
msgstr "Пароль рахунка"

#: network/netconnect.pm:323 network/netconnect.pm:637
#: network/netconnect.pm:820
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "Виберіть інтерфейс мережі"

#: network/netconnect.pm:323 network/netconnect.pm:457
#: network/netconnect.pm:641 standalone/drakgw:113 standalone/drakvpn:49
#, fuzzy, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "Вибачте, ми підтримуємо тільки ядро 2.4."

#: network/netconnect.pm:325 network/netconnect.pm:366
#: network/netconnect.pm:638 network/netconnect.pm:822 network/shorewall.pm:84
#: standalone/drakconnect:643 standalone/drakgw:225 standalone/drakvpn:219
#, c-format
msgid "Net Device"
msgstr "Мережевий пристрій"

#: network/netconnect.pm:326 network/netconnect.pm:334
#, c-format
msgid "External ISDN modem"
msgstr "Зовнішній модем ISDN"

#: network/netconnect.pm:365 standalone/harddrake2:115
#, c-format
msgid "Select a device !"
msgstr "Виберіть пристрій !"

#: network/netconnect.pm:374 network/netconnect.pm:384
#: network/netconnect.pm:394 network/netconnect.pm:410
#: network/netconnect.pm:421
#, c-format
msgid "ISDN Configuration"
msgstr "Конфіґурація ISDN"

#: network/netconnect.pm:375
#, c-format
msgid "What kind of card do you have?"
msgstr "Який тип картки Ви маєте?"

#: network/netconnect.pm:385
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Якщо Ви маєте плату ISA, значення на наступному екрані мають бути\n"
"коректними.\n"
"\n"
"Якщо Ви маєте плату PCMCIA, Ви повинні знати IRQ та IO Вашої плати.\n"

#: network/netconnect.pm:389
#, c-format
msgid "Continue"
msgstr "Продовжити"

#: network/netconnect.pm:389
#, c-format
msgid "Abort"
msgstr "Перервати"

#: network/netconnect.pm:395
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Яка з цих є Вашою картою ISDN?"

#: network/netconnect.pm:410
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Який протокол Ви хочете використовувати?"

#: network/netconnect.pm:412 standalone/drakconnect:116
#: standalone/drakconnect:527 standalone/drakvpn:1140
#, c-format
msgid "Protocol"
msgstr "Протокол"

#: network/netconnect.pm:421
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Виберіть свого провайдера.\n"
"Якщо його немає в списку, виберіть Інший"

#: network/netconnect.pm:423 network/netconnect.pm:529
#: network/netconnect.pm:675
#, fuzzy, c-format
msgid "Provider:"
msgstr "Профіль: "

#: network/netconnect.pm:438
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Ваш модем не підтримується системою.\n"
"Проконсультуйтусь на http://www.linmodems.org"

#: network/netconnect.pm:450
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "Виберіть інтерфейс мережі"

#: network/netconnect.pm:498
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Виберіть, до якого послідовного порта під'єднаний Ваш модем."

#: network/netconnect.pm:527
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "Виберіть чергу друку для друкарки"

#: network/netconnect.pm:556
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Параметри зв'язку по модему"

#: network/netconnect.pm:559
#, c-format
msgid "Connection name"
msgstr "Назва зв'язку"

#: network/netconnect.pm:560
#, c-format
msgid "Phone number"
msgstr "Номер телефона"

#: network/netconnect.pm:561
#, c-format
msgid "Login ID"
msgstr "ID користувача"

#: network/netconnect.pm:576 network/netconnect.pm:609
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Параметри"

#: network/netconnect.pm:579
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Параметри"

#: network/netconnect.pm:580 network/netconnect.pm:912
#: printer/printerdrake.pm:431 standalone/drakconnect:116
#: standalone/drakconnect:325 standalone/drakconnect:806
#: standalone/drakups:266
#, c-format
msgid "IP address"
msgstr "IP-адреса"

#: network/netconnect.pm:581
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "Маска підмережі:"

#: network/netconnect.pm:593
#, c-format
msgid "Dialup: DNS parameters"
msgstr "Діал-ап: параметри DNS"

#: network/netconnect.pm:596
#, fuzzy, c-format
msgid "DNS"
msgstr "NIS"

#: network/netconnect.pm:597
#, c-format
msgid "Domain name"
msgstr "Назва домену"

#: network/netconnect.pm:598 network/netconnect.pm:786
#: standalone/drakconnect:924
#, c-format
msgid "First DNS Server (optional)"
msgstr "Перший сервер DNS (необов'язково)"

#: network/netconnect.pm:599 network/netconnect.pm:787
#: standalone/drakconnect:925
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Другий сервер DNS (необов'язково)"

#: network/netconnect.pm:600
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "Назва друкарки в мережі або IP"

#: network/netconnect.pm:612 standalone/drakconnect:336
#, c-format
msgid "Gateway"
msgstr "Шлюз"

#: network/netconnect.pm:613
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "IP-адреса"

#: network/netconnect.pm:637
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "Конфіґурація мережі"

#: network/netconnect.pm:673
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "Будь-ласка, вкажіть Вашу країну."

#: network/netconnect.pm:691
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""
"Вам потрібно Alcatel microcode.\n"
"Ви можете надати його зараз з допомогою дискети або розділу\n"
"віндовс, або пропустити і виконати пізніше."

#: network/netconnect.pm:695 network/netconnect.pm:700
#, c-format
msgid "Use a floppy"
msgstr "Використовувати дискету"

#: network/netconnect.pm:695 network/netconnect.pm:704
#, c-format
msgid "Use my Windows partition"
msgstr "Використовувати мій розділ Windows"

#: network/netconnect.pm:695 network/netconnect.pm:708
#, c-format
msgid "Do it later"
msgstr "Зробити це пізніше"

#: network/netconnect.pm:715
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""
"Копіювання програми виробника завершилося невдало, файла %s не знайдено"

#: network/netconnect.pm:722
#, c-format
msgid "Firmware copy succeeded"
msgstr "Копіювання програми виробника завершилося успішно"

#: network/netconnect.pm:737
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Вам потрібний Alcatel microcode.\n"
"Звантажте його з:\n"
"%s\n"
"і скопіюйте mgmt.o в /usr/share/speedtouch"

#: network/netconnect.pm:790
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr "Віртуальний шлях ID (VPI):"

#: network/netconnect.pm:791
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr "Віртуальний Коловий ID (VCI):"

#: network/netconnect.pm:793
#, fuzzy, c-format
msgid "Encapsulation :"
msgstr "Ключ шифрування"

#: network/netconnect.pm:810
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""
"ECI Hi-Focus модем не підтримується через те, що драйвери\n"
"розповсюджуться лише в двійковому вигляді.\n"
"\n"
"Ви можете знайти драйвери на http://eciadsl.flashtux.org/"

#: network/netconnect.pm:837
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"УВАГА: Цей пристрій було попередньо налаштовано для з'єднання з Інтернетом.\n"
"\n"
"Просто натисніть \"Гаразд\", щоб зберегти конфіґурацію пристрою.\n"
"Зміна полів нижче призведе до зміни конфіґурації пристрою."

#: network/netconnect.pm:850 network/netconnect.pm:1222
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Вітаємо, налаштування мережі та Internet завершено.\n"
"\n"

#: network/netconnect.pm:864
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "Назва машини zeroconf"

#: network/netconnect.pm:865 network/netconnect.pm:899
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Конфігурую пристрій мережі %s"

#: network/netconnect.pm:866
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""
"Наступні протоколи можуть бути використані для з'єднання ethernet. Будь "
"ласка, виберіть той, що Ви бажаєте використовувати."

#: network/netconnect.pm:900
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Введіть, будь-ласка, конфігурацію IP для цієї машини. Кожен пункт\n"
"треба вводити як IP-адресу в точково-десятковій нотації\n"
"(наприклад, 1.2.3.4)"

#: network/netconnect.pm:907
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Визначити назву машини з адреси DHCP"

#: network/netconnect.pm:908
#, c-format
msgid "DHCP host name"
msgstr "Назва машини DHCP"

#: network/netconnect.pm:913 standalone/drakconnect:330
#: standalone/drakconnect:807 standalone/drakgw:321
#, c-format
msgid "Netmask"
msgstr "Маска мережі"

#: network/netconnect.pm:915 standalone/drakconnect:412
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""
"Прослідковувати id плати мережі (може знадобиться при користуванні мобільним "
"комп'ютером)"

#: network/netconnect.pm:916 standalone/drakconnect:413
#, c-format
msgid "Network Hotplugging"
msgstr "Network Hotplugging"

#: network/netconnect.pm:917 standalone/drakconnect:407
#, c-format
msgid "Start at boot"
msgstr "Стартувати при завантаженні"

#: network/netconnect.pm:919 standalone/drakconnect:810
#, c-format
msgid "DHCP client"
msgstr "клієнт DHCP"

#: network/netconnect.pm:929 printer/printerdrake.pm:1383
#: standalone/drakconnect:608
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP адреса має бути у форматі 1.2.3.4"

#: network/netconnect.pm:932
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr "Попередження : IP-адреса %s вже зарезервована !"

#: network/netconnect.pm:962 network/netconnect.pm:991
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Будь ласка, введіть параметри безпровідного зв'язку для цієї плати:"

#: network/netconnect.pm:965 standalone/drakconnect:378
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "Експертний режим"

#: network/netconnect.pm:967 standalone/drakconnect:379
#, c-format
msgid "Network name (ESSID)"
msgstr "Мережне ім'я (ESSID)"

#: network/netconnect.pm:968 standalone/drakconnect:380
#, fuzzy, c-format
msgid "Network ID"
msgstr "Мережа"

#: network/netconnect.pm:969 standalone/drakconnect:381
#, c-format
msgid "Operating frequency"
msgstr "Частота роботи"

#: network/netconnect.pm:970 standalone/drakconnect:382
#, c-format
msgid "Sensitivity threshold"
msgstr "Порог чутливості"

#: network/netconnect.pm:971 standalone/drakconnect:383
#, c-format
msgid "Bitrate (in b/s)"
msgstr "Швидкість (в б/с)"

#: network/netconnect.pm:977
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Freq повинен мати суфікс k, M або G (наприклад, \"2.46G\" для частоти 2.46 "
"GHz), або додайте необхідну кількість '0' (нулів)."

#: network/netconnect.pm:981
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Rate повинен мати суфікс k, M або G (наприклад, \"11M\" для 11M), або "
"додайте потрібну кількість '0' (нулів)."

#: network/netconnect.pm:994 standalone/drakconnect:394
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:995
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""
"RTS/CTS додає ''привітання'' перед передачею кожного пакету, щоб\n"
"упевнитися, що канал вільний. Це збільшує навантаження, але додає\n"
"швидкості при наявності прихованих або великої кількості активних\n"
"вузлів. Цей параметр визначає розмір найменшого пакету, для якого\n"
"вузол посилає RTS, величина, рівна максимальному розміру пакету\n"
"заборонить цю схему. Ви також можете встановити цей параметр\n"
"на авто, фіксований, або вимкнено."

#: network/netconnect.pm:1002 standalone/drakconnect:395
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Ігрова станція"

#: network/netconnect.pm:1003 standalone/drakconnect:396
#, c-format
msgid "Iwconfig command extra arguments"
msgstr "додаткові аргументи команди lwconfig"

#: network/netconnect.pm:1004
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwpconfig(8) man page for further information."
msgstr ""
"Тут Ви можете настроїти деякі додаткові параметри беспровідного\n"
"зв'язку, такі як: кадрове вікно, канал, фіксація транзакції,\n"
"кодування, потужність, повтори, впізнавання, потужність tx\n"
"(нік вже встановлено, як ім'я машини).\n"
"\n"
"Див. сторінку посібника iwpconfig(8) для подальшої інформації."

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1011 standalone/drakconnect:397
#, c-format
msgid "Iwspy command extra arguments"
msgstr "додаткові аргументи команди lwspy"

#: network/netconnect.pm:1012
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""
"lwspy використовується для втсановлення списку адрес\n"
"в локальній мережі та зчитування інформації про якість\n"
"зв'язку з кожною з них.\n"
"\n"
"Ця інформація аналогічна інформації з /proc/net/wireless:\n"
"якість зв'язку, сила сигналу та рівень шуму.\n"
"\n"
"Див. сторінку посібника iwpspy(8) для подальшої інформації."

#: network/netconnect.pm:1020 standalone/drakconnect:398
#, c-format
msgid "Iwpriv command extra arguments"
msgstr "додаткові аргументи команди lwpriv"

#: network/netconnect.pm:1021
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""
"lwpriv дозволяє встановити необов'язкові (приватні) параметри\n"
"безпровідного мережного інтерфейсу.\n"
"\n"
"lwpriv має справу з параметрами і настройками, специфічними\n"
"для кожного драйверу (на відміну від iwconfig, яка має справу\n"
"лише з загальними).\n"
"\n"
"Теоретично, документація для кожного драйверу має вказувати,\n"
"як використовувати ці специфічні для інтерфейсу команди,\n"
"і їх дію.\n"
"\n"
"Див. сторінку посібника iwpriv(8) для подальшої інформації."

#: network/netconnect.pm:1048
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"У Вашій системі немає сконфіґурованого адаптера мережі ethernet. Не\n"
"можна встановити з'єднання цього типу."

#: network/netconnect.pm:1052 standalone/drakgw:261 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "Виберіть інтерфейс мережі"

#: network/netconnect.pm:1053
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
"Виберіть, яку плату мережі Ви хочете використати для з'єднання з\n"
"Інтернетом"

#: network/netconnect.pm:1074
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Введіть, будь-ласка, назву Вашої машини.\n"
"Назва машини повинна бути повністю кваліфікованою, наприклад,\n"
"``mybox.mylab.myco.com''.\n"
"Ви також можете ввести IP-адресу шлюза, якщо такого маєте."

#: network/netconnect.pm:1078
#, fuzzy, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""
"І наостанок, але ??? Ви можете також ввести IP адреси Ваших серверів DNS."

#: network/netconnect.pm:1080 standalone/drakconnect:923
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "Налаштування назви машини"

#: network/netconnect.pm:1080
#, c-format
msgid "Host name"
msgstr "Назва машини"

#: network/netconnect.pm:1082
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "Сервер DNS"

#: network/netconnect.pm:1083
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "Сервер DNS"

#: network/netconnect.pm:1084
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "Сервер DNS"

#: network/netconnect.pm:1085
#, fuzzy, c-format
msgid "Search domain"
msgstr "Домен NIS"

#: network/netconnect.pm:1086
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""
"За замовчуванням пошуковий домен буде встановлено з повністю заданої назви "
"клієнта"

#: network/netconnect.pm:1087
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Шлюз (напр. %s)"

#: network/netconnect.pm:1089
#, c-format
msgid "Gateway device"
msgstr "Шлюзовий пристрій"

#: network/netconnect.pm:1098
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Адреса DNS-сервера повинна бути у форматі 1.2.3.4"

#: network/netconnect.pm:1103 standalone/drakconnect:611
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Адреса шлюза має бути у форматі 1.2.3.4"

#: network/netconnect.pm:1114
#, c-format
msgid ""
"Enter a Zeroconf host name which will be the one that your machine will get "
"back to other machines on the network:"
msgstr ""
"Введіть назву клієнта Zeroconf, яка буде однією з тих, яку Ваш комп'ютер "
"буде повертати іншим комп'ютерам в мережі:"

#: network/netconnect.pm:1115
#, c-format
msgid "Zeroconf Host name"
msgstr "Назва машини zeroconf"

#: network/netconnect.pm:1118
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Назва машини Zeroconf не повинна містити крапку."

#: network/netconnect.pm:1128
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Ви налаштували кілька способів з'єднання з тенетами.\n"
"Виберіть один із них, яким Ви будете користуватись.\n"
"\n"

#: network/netconnect.pm:1130
#, c-format
msgid "Internet connection"
msgstr "З'єднання з тенетами"

#: network/netconnect.pm:1144
#, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "Налаштування завершене. Чи хочете Ви застосувати зміни ?"

#: network/netconnect.pm:1154
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Чи Ви хочете виконувати з'єднання при завантаженні системи?"

#: network/netconnect.pm:1166
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Мережа потребує перезапуску. Перезапустити зараз?"

#: network/netconnect.pm:1173 network/netconnect.pm:1238
#, c-format
msgid "Network Configuration"
msgstr "Конфігурація мережі"

#: network/netconnect.pm:1174
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Проблема при перезапуску мережі:\n"
"\n"
"%s"

#: network/netconnect.pm:1182
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Чи хочете Ви спробувати під'єднатися до інтернету зараз?"

#: network/netconnect.pm:1190 standalone/drakconnect:955
#, c-format
msgid "Testing your connection..."
msgstr "Випробування з'єднання..."

#: network/netconnect.pm:1206
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Система зараз з'єднана з інтернетом."

#: network/netconnect.pm:1207
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "З міркувань безпеки зараз з'єднання буде розірвано."

#: network/netconnect.pm:1208
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Здається, система не підключена до інтернету.\n"
"Спробуйте змінити конфігурацію свого з'єднання."

#: network/netconnect.pm:1225
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Після завершення рекомендуємо Вам перезавантажити X сервер для того,\n"
"щоб позбутися проблем через зміну назви машини."

#: network/netconnect.pm:1226
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Під час налаштування сталася проблема.\n"
"Перевірте з'єднання з допомогою net_monitor або mcc. Якщо Ваше з'єднання не "
"працює, Ви можете перезапустити налаштування."

#: network/netconnect.pm:1239
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Через те, що Ви робите встановлення мережі, Ваша мережа вже\n"
"сконфіґурована.\n"
"\n"
"Натисніть Гаразд, щоб зберегти установки мережі, або Відмінити,\n"
"щоб змінити установки з'єднання інтернета і мережі.\n"

#: network/netconnect.pm:1327
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""
"Сталася неочікувана помилка:\n"
"%s"

#: network/network.pm:315
#, c-format
msgid "Proxies configuration"
msgstr "Конфіґурація проксі"

#: network/network.pm:316
#, c-format
msgid "HTTP proxy"
msgstr "Проксі HTTP"

#: network/network.pm:317
#, c-format
msgid "FTP proxy"
msgstr "Проксі FTP"

#: network/network.pm:320
#, c-format
msgid "Proxy should be http://..."
msgstr "Назва проксі має починатися з http://..."

#: network/network.pm:321
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Адреса (URL) має починатися з 'ftp:' або 'http:'"

#: network/shorewall.pm:28
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Знайдено конфіґурацію firewall!"

#: network/shorewall.pm:29
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Увага! Знайдено існуючу конфіґурацію захисного шлюза. Можливо, Вам потрібно\n"
"буде вручну виконати деякі зміни після встановлення."

#: network/shorewall.pm:77 standalone/drakgw:218 standalone/drakvpn:212
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Будь-ласка, введіть назву інтерфейсу, під'єднаного до інтернету.\n"
"\n"
"Приклади:\n"
"\t\tppp+ для модемних або DSL з'єднань, \n"
"\t\teth0 або eth1 для кабельного з'єднання, \n"
"\t\tippp+ для isdn з'єднання.\n"

#: network/tools.pm:205
#, c-format
msgid "Insert floppy"
msgstr "Вставте дискету"

#: network/tools.pm:206
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Вставте дискету відформатовану у FAT в привід %s з %s в в кореневу теку і "
"натисніть %s"

#: network/tools.pm:207
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Помилка доступу до дисковода, неможливо змонтувати пристрій %s"

#: partition_table.pm:644
#, c-format
msgid "mount failed: "
msgstr "помилка монтування: "

#: partition_table.pm:749
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Розширені розділи не підтримуються на цій платформі."

#: partition_table.pm:767
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"У Вас є проміжок в таблиці розділів, але я не можу ним скористуватися.\n"
"Єдиним рішенням може бути пересунути Ваші основні розділи так, щоб\n"
"проміжок був поруч з розширеними розділами."

#: partition_table.pm:854
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Відновлення з файлу %s не спрацювало: %s"

#: partition_table.pm:856
#, c-format
msgid "Bad backup file"
msgstr "Поганий резервний файл"

#: partition_table.pm:876
#, c-format
msgid "Error writing to file %s"
msgstr "Помилка при записі у файл %s"

#: partition_table/raw.pm:187
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Щось недобре відбувається на вашому диску.\n"
"Тестування цілісності даних було невдалим.\n"
"Це означає, що результатом запису будь-чого на диск будуть випадкові, "
"пошкоджені дані."

#: pkgs.pm:24
#, c-format
msgid "must have"
msgstr "повинен мати"

#: pkgs.pm:25
#, c-format
msgid "important"
msgstr "важливий"

#: pkgs.pm:26
#, c-format
msgid "very nice"
msgstr "дуже гарний"

#: pkgs.pm:27
#, c-format
msgid "nice"
msgstr "гарно"

#: pkgs.pm:28
#, c-format
msgid "maybe"
msgstr "можливо"

#: printer/cups.pm:103
#, c-format
msgid "(on %s)"
msgstr "(на %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr "(на цій машині)"

#: printer/cups.pm:115 standalone/printerdrake:197
#, c-format
msgid "Configured on other machines"
msgstr "Налаштовано на іншій машині"

#: printer/cups.pm:117
#, c-format
msgid "On CUPS server \"%s\""
msgstr "На сервер CUPS \"%s\""

#: printer/cups.pm:117 printer/printerdrake.pm:3989
#: printer/printerdrake.pm:3998 printer/printerdrake.pm:4139
#: printer/printerdrake.pm:4150 printer/printerdrake.pm:4362
#, c-format
msgid " (Default)"
msgstr " (Основна)"

#: printer/data.pm:22
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Друкувати, не ставити в чергу"

#: printer/data.pm:23
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:34
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:35
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:56
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation (нове покоління)"

#: printer/data.pm:57
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:82
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System (Спільна система друку для Юнікс)"

#: printer/detect.pm:148 printer/detect.pm:226 printer/detect.pm:428
#: printer/detect.pm:465 printer/printerdrake.pm:686
#, c-format
msgid "Unknown Model"
msgstr "Невідома модель"

#: printer/main.pm:28
#, c-format
msgid "Local printer"
msgstr "Локальна друкарка"

#: printer/main.pm:29
#, c-format
msgid "Remote printer"
msgstr "Віддалена друкарка"

#: printer/main.pm:30
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Друкарка на віддаленому сервері CUPS"

#: printer/main.pm:31 printer/printerdrake.pm:1406
#, c-format
msgid "Printer on remote lpd server"
msgstr "Друкарка на віддаленому сервері lpd"

#: printer/main.pm:32
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Мережева друкарка (TCP/Socket)"

#: printer/main.pm:33
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Друкарка на сервері SMB/Windows 95/98/NT "

#: printer/main.pm:34
#, c-format
msgid "Printer on NetWare server"
msgstr "Друкарка на NetWare сервері"

#: printer/main.pm:35 printer/printerdrake.pm:1410
#, c-format
msgid "Enter a printer device URI"
msgstr "Введіть URI пристрою друкарки"

#: printer/main.pm:36
#, c-format
msgid "Pipe job into a command"
msgstr "Перенаправити роботу по каналу в команду"

#: printer/main.pm:306 printer/main.pm:574 printer/main.pm:1544
#: printer/main.pm:2228 printer/main.pm:2239 printer/printerdrake.pm:1866
#: printer/printerdrake.pm:4396
#, c-format
msgid "Unknown model"
msgstr "Невідома модель"

#: printer/main.pm:331 standalone/printerdrake:196
#, c-format
msgid "Configured on this machine"
msgstr "Налаштовано на цій машині"

#: printer/main.pm:337 printer/printerdrake.pm:963
#, c-format
msgid " on parallel port #%s"
msgstr " на паралельному порті #%s"

#: printer/main.pm:340 printer/printerdrake.pm:965
#, c-format
msgid ", USB printer #%s"
msgstr ", друкарка USB #%s"

#: printer/main.pm:342
#, c-format
msgid ", USB printer"
msgstr ", друкарка USB"

#: printer/main.pm:347
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", багатофункціональний пристрій на паралельном порті #%s"

#: printer/main.pm:350
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", багатофункціональний пристрій на паралельному порті"

#: printer/main.pm:352
#, c-format
msgid ", multi-function device on USB"
msgstr ", багатоцільовий пристрій на USB"

#: printer/main.pm:354
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", багатофункціональний пристрій на HP JetDirect"

#: printer/main.pm:356
#, c-format
msgid ", multi-function device"
msgstr ", багатофункціональний пристрій"

#: printer/main.pm:359
#, c-format
msgid ", printing to %s"
msgstr ", друк в %s"

#: printer/main.pm:361
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " на сервері LPD \"%s\", друкарка \"%s\""

#: printer/main.pm:363
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", машина TCP/IP \"%s\", порт %s"

#: printer/main.pm:367
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr " на сервері SMB/Windows \"%s\", ресурс \"%s\""

#: printer/main.pm:371
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " на сервер Novell \"%s\", друкарка \"%s\""

#: printer/main.pm:373
#, c-format
msgid ", using command %s"
msgstr ", використовуючи команду %s"

#: printer/main.pm:388
#, c-format
msgid "Parallel port #%s"
msgstr "Паралельний порт #%s"

#: printer/main.pm:391 printer/printerdrake.pm:979
#: printer/printerdrake.pm:1002 printer/printerdrake.pm:1020
#, c-format
msgid "USB printer #%s"
msgstr "USB-друкарка #%s"

#: printer/main.pm:393
#, c-format
msgid "USB printer"
msgstr "Друкарка USB"

#: printer/main.pm:398
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "Багатофункціональний пристрій на паралельном порті #%s"

#: printer/main.pm:401
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "Багатофункціональний пристрій на паралельному порті"

#: printer/main.pm:403
#, c-format
msgid "Multi-function device on USB"
msgstr "Багатоцільовий пристрій на USB"

#: printer/main.pm:405
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "Багатофункціональний пристрій на HP JetDirect"

#: printer/main.pm:407
#, c-format
msgid "Multi-function device"
msgstr "Багатофункціональний пристрій"

#: printer/main.pm:410
#, c-format
msgid "Prints into %s"
msgstr "Друкує в %s"

#: printer/main.pm:412
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "LPD сервер\"%s\", друкарка \"%s\""

#: printer/main.pm:414
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "Машина TCP/IP \"%s\", порт %s"

#: printer/main.pm:418
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "Сервер SMB/Windows \"%s\", ресурс \"%s\""

#: printer/main.pm:422
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "Сервер Novell \"%s\", друкарка \"%s\""

#: printer/main.pm:424
#, c-format
msgid "Uses command %s"
msgstr "Використовуючи команду %s"

#: printer/main.pm:426
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:571 printer/printerdrake.pm:732
#: printer/printerdrake.pm:2463
#, c-format
msgid "Raw printer (No driver)"
msgstr "Друкарка необроблених даних (немає драйвера)"

#: printer/main.pm:1085 printer/printerdrake.pm:179
#: printer/printerdrake.pm:191
#, c-format
msgid "Local network(s)"
msgstr "Місцева мережа"

#: printer/main.pm:1087 printer/printerdrake.pm:195
#, c-format
msgid "Interface \"%s\""
msgstr "Інтерфейс\"%s\""

#: printer/main.pm:1089
#, c-format
msgid "Network %s"
msgstr "Мережа %s"

#: printer/main.pm:1091
#, c-format
msgid "Host %s"
msgstr "Машина %s"

#: printer/main.pm:1120
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Порт %s)"

#: printer/printerdrake.pm:22
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
"Друкарка HP LaserJet 1000 вимагає програми виробника, що завантажується з "
"віддаленої машини після увімкнення. Звантажте пакунок з драйверами Віндовс з "
"веб-сайта HP (програми з фірмових КД не працюють) і вилучіть необхідний файл "
"шляхом розпакування файла '.exe' з допомогою програми 'unzip', шукаючи файл "
"'sihp1000.img'. Скопіюйте цей файл в теку /etc/ printer'. Там його буде "
"знайдено автоматичним скриптом при завантаженні з віддаленої машини кожного "
"разу при приєднанні і увімкненні.\n"

#: printer/printerdrake.pm:62
#, c-format
msgid "CUPS printer configuration"
msgstr "Налаштування друкарки CUPS"

#: printer/printerdrake.pm:63
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Тут Ви можете вказати, чи можуть під'єднані до цієї машини друкарки бути "
"доступними для віддалених машин, і до яких саме."

#: printer/printerdrake.pm:64
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Тут Ви також можете прийняти рішення, чи друкарки на віддалених машинах "
"стануть автоматично доступними на цій машині."

#: printer/printerdrake.pm:67
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Друкарки цієї машини доступні на інших машинах"

#: printer/printerdrake.pm:69
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Автоматично знайти друкарки на віддалених машинах"

#: printer/printerdrake.pm:71
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Доступ до друкарок на машинах/в мережі: "

#: printer/printerdrake.pm:73
#, c-format
msgid "Custom configuration"
msgstr "Вибіркове налаштування"

#: printer/printerdrake.pm:78 standalone/scannerdrake:561
#: standalone/scannerdrake:578
#, c-format
msgid "No remote machines"
msgstr "Немає віддалених машин"

#: printer/printerdrake.pm:88
#, c-format
msgid "Additional CUPS servers: "
msgstr "Додаткові сервери CUPS: "

#: printer/printerdrake.pm:93
#, c-format
msgid "None"
msgstr "Нічого"

#: printer/printerdrake.pm:95
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Щоб отримати доступ до друкарок на віддалених CUPS-серверах у місцевій "
"мережі, Вам потрібно увімкнути параметр \"Автоматично знаходити можливі "
"друкарки на віддалених машинах\"; сервер CUPS автоматично повідомить Вашу "
"машину про свої друкарки. Всі друкарки, які зараз відомі Вашій машині, "
"перелічені в секції \"Віддалені друкарки\" головного вікна Printerdrake. "
"Якщо Ваші сервери CUPS не знаходяться в місцевій мережі, Вам потрібно ввести "
"тут IP-адреси і, необов'язково, номери портів, щоб дати друкарці інформацію "
"з серверів."

#: printer/printerdrake.pm:100
#, c-format
msgid "Japanese text printing mode"
msgstr "Режим друку тексту японською мовою"

#: printer/printerdrake.pm:101
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"Увімкнення цього параметра дозволяє друкувати простий текст японською мовою. "
"Використовуйте його тільки тоді, коли Ви дійсно хочете друкувати текст "
"японською, коли параметр увімкнено, Ви не зможете друкувати латинські "
"символи з наголосами, а також встановлювати поля, розмір символів і т.і. Цей "
"параметр стосується тільки друкарок, приєднаних до цієї машини. Якщо Ви "
"хочете друкувати японський текст на віддаленій машині, Вам потрібно "
"увімкнути цю функцію на тій віддаленій машині."

#: printer/printerdrake.pm:105
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Автоматичне виправлення конфіґурації CUPS"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Коли цей параметр увімкнено, то при кожному запуску CUPS автоматично "
"виконується:\n"
"\n"
"- якщо встановлено LPD/LPRng, то /etc/printcap не перезаписується CUPS\n"
"\n"
"- якщо немає /etc/cups/cupsd.conf, то створюється\n"
"\n"
"- коли інформація з друкарки транслюється, вона не містить \"localhost\" як "
"назву сервера.\n"
"\n"
"Якщо деякі з цих перевірок створюють для Вас проблеми, вимкніть цю опцію, "
"але тоді Ви повинні самі потурбуватися про ці пункти."

#: printer/printerdrake.pm:129 printer/printerdrake.pm:205
#, c-format
msgid "Sharing of local printers"
msgstr "Доступ до місцевих друкарок"

#: printer/printerdrake.pm:130
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Це машини і мережі, в яких локально під'єднані друкарки повинні бути "
"доступні:"

#: printer/printerdrake.pm:141
#, c-format
msgid "Add host/network"
msgstr "Додати машину/мережу"

#: printer/printerdrake.pm:147
#, c-format
msgid "Edit selected host/network"
msgstr "Змінити вибрану машину/мережу"

#: printer/printerdrake.pm:156
#, c-format
msgid "Remove selected host/network"
msgstr "Вилучити вибрану машину/мережу"

#: printer/printerdrake.pm:187 printer/printerdrake.pm:197
#: printer/printerdrake.pm:210 printer/printerdrake.pm:217
#: printer/printerdrake.pm:248 printer/printerdrake.pm:266
#, c-format
msgid "IP address of host/network:"
msgstr "IP-адреса машини/мережі:"

#: printer/printerdrake.pm:206
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr "Виберіть мережу або машину, на якій Ваша друкарка могла б працювати:"

#: printer/printerdrake.pm:213
#, c-format
msgid "Host/network IP address missing."
msgstr "Відсутня IP-адреса машини/мережі"

#: printer/printerdrake.pm:221
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Введена IP-адреса машини/мережі неправильна.\n"

#: printer/printerdrake.pm:222 printer/printerdrake.pm:400
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Приклади правильних IP:\n"

#: printer/printerdrake.pm:246
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Ця машина/мережа вже є в списку, її не можна додати знову.\n"

#: printer/printerdrake.pm:316 printer/printerdrake.pm:387
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Отримання доступу до друкарок на віддалених серверах CUPS"

#: printer/printerdrake.pm:317
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Додайте тут сервери CUPS, друкарки яких Ви хочете використовувати. Вам "
"потрібно це робити тільки тоді, якщо сервери не надсилають інформацію про "
"свої друкарки в місцеву мережу."

#: printer/printerdrake.pm:328
#, c-format
msgid "Add server"
msgstr "Додати сервера"

#: printer/printerdrake.pm:334
#, c-format
msgid "Edit selected server"
msgstr "Редактувати вибраний сервер"

#: printer/printerdrake.pm:343
#, c-format
msgid "Remove selected server"
msgstr "Вилучити виділений сервер"

#: printer/printerdrake.pm:388
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
"Введіть IP-адресу і порт машини, друкарки якої Ви хочете використовувати."

#: printer/printerdrake.pm:389
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "Якщо порта не вказано, буде взято 631 як типовий."

#: printer/printerdrake.pm:393
#, c-format
msgid "Server IP missing!"
msgstr "Немає IP-адреси сервера!"

#: printer/printerdrake.pm:399
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Введений IP неправильний.\n"

#: printer/printerdrake.pm:411 printer/printerdrake.pm:1629
#, c-format
msgid "The port number should be an integer!"
msgstr "Номер порта має бути цілим числом!"

#: printer/printerdrake.pm:422
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Цей сервер вже знаходиться в списку, його не можна додати знову.\n"

#: printer/printerdrake.pm:433 printer/printerdrake.pm:1650
#: standalone/drakups:233 standalone/harddrake2:64
#, c-format
msgid "Port"
msgstr "Порт"

#: printer/printerdrake.pm:478 printer/printerdrake.pm:545
#: printer/printerdrake.pm:610 printer/printerdrake.pm:628
#: printer/printerdrake.pm:711 printer/printerdrake.pm:768
#: printer/printerdrake.pm:794 printer/printerdrake.pm:1703
#: printer/printerdrake.pm:1886 printer/printerdrake.pm:1902
#: printer/printerdrake.pm:1945 printer/printerdrake.pm:1982
#: printer/printerdrake.pm:2024 printer/printerdrake.pm:2061
#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2314
#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2458
#: printer/printerdrake.pm:2568 printer/printerdrake.pm:3069
#: printer/printerdrake.pm:3134 printer/printerdrake.pm:3177
#: printer/printerdrake.pm:3180 printer/printerdrake.pm:3299
#: printer/printerdrake.pm:3364 printer/printerdrake.pm:3436
#: printer/printerdrake.pm:3457 printer/printerdrake.pm:3466
#: printer/printerdrake.pm:3557 printer/printerdrake.pm:3655
#: printer/printerdrake.pm:3661 printer/printerdrake.pm:3674
#: printer/printerdrake.pm:3726 printer/printerdrake.pm:3766
#: printer/printerdrake.pm:3778 printer/printerdrake.pm:3789
#: printer/printerdrake.pm:3798 printer/printerdrake.pm:3811
#: printer/printerdrake.pm:3888 printer/printerdrake.pm:3945
#: printer/printerdrake.pm:4010 printer/printerdrake.pm:4270
#: printer/printerdrake.pm:4313 printer/printerdrake.pm:4459
#: printer/printerdrake.pm:4517 printer/printerdrake.pm:4546
#: standalone/printerdrake:65 standalone/printerdrake:85
#: standalone/printerdrake:515
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:479
#, c-format
msgid "Restarting CUPS..."
msgstr "Перезапускається CUPS..."

#: printer/printerdrake.pm:502
#, c-format
msgid "Select Printer Connection"
msgstr "Виберіть приєднання друкарки"

#: printer/printerdrake.pm:503
#, c-format
msgid "How is the printer connected?"
msgstr "Як під'єднано друкарку?"

#: printer/printerdrake.pm:505
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Друкарки на віддаленому сервері CUPS не потрібно налаштовувати зараз;\n"
"ці друкарки будуть визначені автоматично."

#: printer/printerdrake.pm:508 printer/printerdrake.pm:4012
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""
"\n"
"УВАГА: Немає активного локального мережного з'єднання, віддалені друкарки не "
"можуть бути ні визначені, ні протестовані!"

#: printer/printerdrake.pm:515
#, fuzzy, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr "Автовизначення друкарки (Місцеві, TCP/Socket і SMB друкарки)"

#: printer/printerdrake.pm:545
#, c-format
msgid "Checking your system..."
msgstr "Перевіряється Ваша система..."

#: printer/printerdrake.pm:561
#, c-format
msgid "and one unknown printer"
msgstr "і одна невідома друкарка"

#: printer/printerdrake.pm:563
#, c-format
msgid "and %d unknown printers"
msgstr "і %d невідомих друкарок"

#: printer/printerdrake.pm:567
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Наступні друкарки\n"
"\n"
"%s%s\n"
"під'єднані безпосередньо до Вашої системи"

#: printer/printerdrake.pm:569
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Наступна друкарка\n"
"\n"
"%s%s\n"
"вже приєднана до Вашої системи"

#: printer/printerdrake.pm:570
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Наступна друкарка\n"
"\n"
"%s%s\n"
"під'єднана безпосередньо до Вашої системи"

#: printer/printerdrake.pm:574
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Є одна невідома друкарка, під'єднана безпосередньо до Вашої системи"

#: printer/printerdrake.pm:575
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"Є %d невідомих друкарок, прямо під'єднаних до Вашої системи"

#: printer/printerdrake.pm:578
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "Не знайдено друкарок, під'єднаних безпосередньо до Вашої машини"

#: printer/printerdrake.pm:581
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Переконайтеся, що всі Ваші друкарки під'єднані і увімкнені).\n"

#: printer/printerdrake.pm:594
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Чи хочете Ви зробити можливим друк на друкарках, перелічених вище або на "
"друкарках в місцевій мережі?\n"

#: printer/printerdrake.pm:595
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Ви хочете дозволити друк на друкарках і місцевій мережі?\n"

#: printer/printerdrake.pm:597
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Чи хочете Ви увімкнути друк на друкарках, згаданих вище?\n"

#: printer/printerdrake.pm:598
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Ви впевнені, що хочете налаштувати друк на цій машині?\n"

#: printer/printerdrake.pm:599
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"ПРИМІТКА: Залежно від моделі друкарки і системи друку буде встановлено до %d "
"Мб додаткових програм."

#: printer/printerdrake.pm:629
#, c-format
msgid "Searching for new printers..."
msgstr "Йде пошук нових друкарок..."

#: printer/printerdrake.pm:713
#, c-format
msgid "Configuring printer ..."
msgstr "Здійснюється конфігурація друкарки ..."

#: printer/printerdrake.pm:714 printer/printerdrake.pm:769
#: printer/printerdrake.pm:3790
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Налаштовується друкарка \"%s\"..."

#: printer/printerdrake.pm:734
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:735
#, c-format
msgid " on "
msgstr " на "

#: printer/printerdrake.pm:736 standalone/scannerdrake:136
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:741 printer/printerdrake.pm:2470
#, c-format
msgid "Printer model selection"
msgstr "Вибір моделі друкарки"

#: printer/printerdrake.pm:742 printer/printerdrake.pm:2471
#, c-format
msgid "Which printer model do you have?"
msgstr "Яку модель друкарки Ви маєте?"

#: printer/printerdrake.pm:743
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake не зміг встановити модель Вашої друкарки %s. Будь-ласка, "
"виберіть правильну модель із списку."

#: printer/printerdrake.pm:746 printer/printerdrake.pm:2476
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Якщо Вашої друкарки немає в переліку, виберіть сумісну (див. документацію до "
"друкарки) або подібну."

#: printer/printerdrake.pm:795 printer/printerdrake.pm:3779
#: printer/printerdrake.pm:3946 printer/printerdrake.pm:4271
#: printer/printerdrake.pm:4314 printer/printerdrake.pm:4518
#, c-format
msgid "Configuring applications..."
msgstr "Налаштовуються програми..."

#: printer/printerdrake.pm:831 printer/printerdrake.pm:843
#: printer/printerdrake.pm:901 printer/printerdrake.pm:1872
#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4211
#, c-format
msgid "Add a new printer"
msgstr "Додати нову друкарку"

#: printer/printerdrake.pm:832
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Ласкаво просимо до Помічника встановлення друкарки\n"
"\n"
"Цей помічник дасть змогу Вам встановити місцеві або віддалені друкарки для "
"використання їх з цієї машини, а також з інших машин в мережі.\n"
"\n"
"Він запитає у Вас всю необхідну інформацію для встановлення друкарки і "
"надасть Вам доступ до всіх наявних драйверів друкарок, параметрів драйверів "
"і типів під'єднання друкарок."

#: printer/printerdrake.pm:845
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Ласкаво просимо до Помічника встановлення друкарки\n"
"\n"
"Цей Помічник допоможе Вам встановити Ваші друкарки, під'єднані до цього "
"комп'ютера, безпосередньо до мережі, або до віддалених Windows-машин.\n"
"\n"
"Будь-ласка, під'єднайте до цього комп'ютера і увімкніть всі друкарки, щоб "
"вони могли бути автовизначені. Мережеві друкарки і Windows-машини також "
"повинні бути увімкнені.\n"
"\n"
"Зауважте, що автовизначення друкарок в мережі відбувається довше, ніж "
"під'єднаних до Вашої машини. Тому вимкніть автовизначення мережевих друкарок "
"і під'єднаних до інших Windows-машин, якщо вони Вам не потрібні.\n"
"\n"
" Натисніть \"Далі\", коли будете готові і \"Скасувати\", якщо Ви не хочете "
"встановлювати друкарки зараз."

#: printer/printerdrake.pm:854
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Ласкаво просимо до Помічника встановлення друкарки\n"
"\n"
"Цей помічник допоможе Вам встановити друкарки, під'єднані до цього "
"комп'ютера.\n"
"\n"
"Будь-ласка, під'єднайте до цієї машини і увімкніть всі друкарки, щоб вони "
"могли бути визначені автоматично.\n"
"\n"
"Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо Ви не хочете "
"зараз встановлювати друкарки."

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Ласкаво просимо до Помічника встановлення друкарки\n"
"\n"
"Цей Помічник допоможе Вам встановити друкарки, під'єднані до цього "
"комп'ютера, або під'єднані безпосередньо до мережі.\n"
"\n"
"Якщо Ви маєте друкарки, під'єднані до цієї машини, будь-ласка, увімкніть їх, "
"щоб їх можна було автоматично визначити. Так само, Ваші мережеві друкарки "
"повинні бути під'єднані і ввімкнені.\n"
"\n"
"Зауважте, що автоматичне визначення друкарок в мережі виконується значно "
"довше, ніж автоматичне визначення тільки друкарок, під'єднаних до цієї "
"машини. Тому вимкніть автоматичне визначення мережевих друкарок, якщо вони "
"Вам не потрібні.\n"
"\n"
"Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо Ви не хочите "
"зараз встановлювати свої друкарки."

#: printer/printerdrake.pm:871
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Ласкаво просимо до Помічника встановлення друкарки\n"
"\n"
"Цей Помічник допоможе Вам встановити друкарки, під'єднані до цього "
"комп'ютера.\n"
"\n"
"Якщо у Вас є друкарка, під'єднайте її кабель в цей комп'ютер і увімкніть "
"його, щоб вона могла бути визначена автоматично.\n"
"\n"
"Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо не хочетезараз "
"встановлювати друкарки."

#: printer/printerdrake.pm:880
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Автоматично визначати друкарки, під'єднані до цієї машини"

#: printer/printerdrake.pm:883
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""
"Автоматично виявити друкарки, під'єднані безпосередньо до місцевої мережі"

#: printer/printerdrake.pm:886
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Автоматичне визначення друкарок, під'єднаних до машин з Microsoft Windows"

#: printer/printerdrake.pm:902
#, fuzzy, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
"\n"
"Вітаємо, тепер Вашу друкарку встановлено і налаштовано!\n"
"\n"
"Ви можете друкувати, використовуючи команду \"Друк\" своєї програми "
"(переважно в меню \"Файл\").\n"
"\n"
"Якщо Ви захочете додати, видалити або перейменувати друкарку, або якщо Ви "
"захочете змінити типові налаштування (лоток для подачі паперу, якість "
"друку, ...), виберіть \"Друкарка\" в розділі \"Обладнання\" Центра керування "
"Мандрейк."

#: printer/printerdrake.pm:937 printer/printerdrake.pm:1152
#: printer/printerdrake.pm:1214 printer/printerdrake.pm:1304
#: printer/printerdrake.pm:1441 printer/printerdrake.pm:1516
#: printer/printerdrake.pm:1667 printer/printerdrake.pm:1750
#: printer/printerdrake.pm:1759 printer/printerdrake.pm:1768
#: printer/printerdrake.pm:1779 printer/printerdrake.pm:1892
#: printer/printerdrake.pm:1954 printer/printerdrake.pm:1988
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "Встановлюється пакунок %s"

#: printer/printerdrake.pm:939
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr "Пропуск автовизначення серверів Windows/SMB"

#: printer/printerdrake.pm:945 printer/printerdrake.pm:1075
#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, c-format
msgid "Printer auto-detection"
msgstr "Автовизначення друкарок"

#: printer/printerdrake.pm:945
#, c-format
msgid "Detecting devices..."
msgstr "Визначаю пристрої..."

#: printer/printerdrake.pm:967
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", мережева друкарка \"%s\", порт %s"

#: printer/printerdrake.pm:969
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", друкарка \"%s\" на сервері SMB/Windows \"%s\""

#: printer/printerdrake.pm:973
#, c-format
msgid "Detected %s"
msgstr "Знайдено %s"

#: printer/printerdrake.pm:977 printer/printerdrake.pm:1000
#: printer/printerdrake.pm:1017
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Друкарка на паралельному порті #%s"

#: printer/printerdrake.pm:981
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Мережева друкарка \"%s\", порт %s"

#: printer/printerdrake.pm:983
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Друкарка \"%s\" на сервері SMB/Windows \"%s\""

#: printer/printerdrake.pm:1062
#, c-format
msgid "Local Printer"
msgstr "Локальна друкарка"

#: printer/printerdrake.pm:1063
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Не знайдено місцевих друкарок! Щоб встановити вручну, введіть назву пристрою/"
"файла (паралельні порти: /dev/lp0, /dev/lp1, ..., еквіваленти LPT1:, "
"LPT2:, ..., перша USB-друкарка: /dev/usb/lp0, друга USB-друкарка: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1067
#, c-format
msgid "You must enter a device or file name!"
msgstr "Вам потрібно ввести пристрій або назву файла!"

#: printer/printerdrake.pm:1076
#, c-format
msgid "No printer found!"
msgstr "Друкарок не знайдено!"

#: printer/printerdrake.pm:1084
#, c-format
msgid "Local Printers"
msgstr "Місцеві друкарки"

#: printer/printerdrake.pm:1085
#, c-format
msgid "Available printers"
msgstr "Наявні друкарки"

#: printer/printerdrake.pm:1089 printer/printerdrake.pm:1098
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Наступні друкарки було визначено автоматично. "

#: printer/printerdrake.pm:1091
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Якщо це не те, що Ви хочете налаштувати, введіть назву_пристрою/ назву_файла "
"в рядку вводу"

#: printer/printerdrake.pm:1092
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"Як альтернативу Ви можете вказати назву_пристрою/назву_файла в рядку вводу"

#: printer/printerdrake.pm:1093 printer/printerdrake.pm:1102
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Тут подано список автоматично визначених друкарок. "

#: printer/printerdrake.pm:1095
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Будь-ласка, виберіть друкарку, яку Ви хочете встановити, або введіть назву "
"пристрою/файла в рядку вводу"

#: printer/printerdrake.pm:1096
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Будь-ласка, виберіть друкарку, на яку відсилати завдання друку, або введіть "
"назву пристрою/файла в рядку вводу"

#: printer/printerdrake.pm:1100
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Конфігурацію друкарки буде здійснено повністю автоматично. Якщо Вашу "
"друкарку не буде коректно визначено, або якщо Ви надаєте перевагу "
"налаштуванню друкарки вручну, поверніться до \"Налаштування вручну\"."

#: printer/printerdrake.pm:1101
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "На даний момент немає альтернативної можливості"

#: printer/printerdrake.pm:1104
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Будь-ласка, виберіть друкарку, яку Ви хочете налаштувати. Налаштування Вашої "
"друкарки відбудеться повністю автоматично. Якщо Вашу друкарку буде "
"неправильно визначено, або якщо Ви віддаєте перевагу налаштуванню вручну, "
"виберіть \"Налаштування вручну\"."

#: printer/printerdrake.pm:1105
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Будь-ласка, вкажіть друкарку, на яку повинні відправлятися завдання."

#: printer/printerdrake.pm:1107
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Будь-ласка, вкажіть порт, до якого під'єднано Вашу друкарку, або введіть "
"назву пристрою/файла в рядку вводу"

#: printer/printerdrake.pm:1108
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Виберіть, до якого послідовного порта під'єднана Ваша друкарка."

#: printer/printerdrake.pm:1110
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Паралельні порти: /dev/lpt0, dev/lpt1, ..., відповідають LPT1:, "
"LPT2:, ..., 1-а друкарка USB: /dev/usb/lp0, 2-а друкарка USB: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1114
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Вам потрібно вибрати/ввести друкарку/пристрій!"

#: printer/printerdrake.pm:1154 printer/printerdrake.pm:1216
#: printer/printerdrake.pm:1306 printer/printerdrake.pm:1443
#: printer/printerdrake.pm:1518 printer/printerdrake.pm:1669
#: printer/printerdrake.pm:1752 printer/printerdrake.pm:1761
#: printer/printerdrake.pm:1770 printer/printerdrake.pm:1781
#, fuzzy, c-format
msgid "Aborting"
msgstr "Перервати"

#: printer/printerdrake.pm:1189
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Параметри віддаленої lpd-друкарки"

#: printer/printerdrake.pm:1190
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Щоб використовувати віддалену lpd-друкарку, Вам потрібно вказати назву\n"
"сервера друкарки та назву друкарки на цьому сервері."

#: printer/printerdrake.pm:1191
#, c-format
msgid "Remote host name"
msgstr "Назва віддаленої машини"

#: printer/printerdrake.pm:1192
#, c-format
msgid "Remote printer name"
msgstr "Назва віддаленої друкарки"

#: printer/printerdrake.pm:1195
#, c-format
msgid "Remote host name missing!"
msgstr "Немає назви віддаленої машини!"

#: printer/printerdrake.pm:1199
#, c-format
msgid "Remote printer name missing!"
msgstr "Відсутня назва віддаленої друкарки!"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#: standalone/drakTermServ:465 standalone/drakTermServ:763
#: standalone/drakTermServ:779 standalone/drakTermServ:1417
#: standalone/drakTermServ:1425 standalone/drakTermServ:1436
#: standalone/drakbackup:582 standalone/drakbackup:687
#: standalone/drakbackup:722 standalone/drakbackup:840
#: standalone/drakconnect:263 standalone/drakconnect:298
#: standalone/drakconnect:542 standalone/drakconnect:552
#: standalone/drakconnect:576 standalone/harddrake2:160
#, c-format
msgid "Information"
msgstr "Інформація"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#, c-format
msgid "Detected model: %s %s"
msgstr "Знайдено модель: %s %s"

#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, c-format
msgid "Scanning network..."
msgstr "Вивчається мережа..."

#: printer/printerdrake.pm:1321 printer/printerdrake.pm:1342
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", друкарка \"%s\" на сервері \"%s\""

#: printer/printerdrake.pm:1324 printer/printerdrake.pm:1345
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Друкарка \"%s\" на сервері \"%s\""

#: printer/printerdrake.pm:1366
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Параметри друкарки SMB (Windows 9x/NT)"

#: printer/printerdrake.pm:1367
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Щоб друкувати на SMB-друкарці Вам потрібно вказати назву машини з SMB\n"
"(Зауважте! Вона може відрізнятися від його TCP/IP назви!) і, можливо,\n"
"IP-адресу сервера друку, так само, як і назву друкарки, доступ до якої "
"хочете надати, та будь-яким придатним іменем користувача, паролем, та "
"інформацію про робочу групу."

#: printer/printerdrake.pm:1368
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
"Якщо потрібну друкарку було виявлено автоматично, просто виберіть її із "
"списку, а потім додайте, якщо необхідно, ім'я користувача, пароль і/або "
"робочу групу."

#: printer/printerdrake.pm:1370
#, c-format
msgid "SMB server host"
msgstr "Назва машини SMB-сервера"

#: printer/printerdrake.pm:1371
#, c-format
msgid "SMB server IP"
msgstr "IP-адреса SMB-сервера"

#: printer/printerdrake.pm:1372
#, c-format
msgid "Share name"
msgstr "Назва ресурсу"

#: printer/printerdrake.pm:1375
#, c-format
msgid "Workgroup"
msgstr "Робоча група"

#: printer/printerdrake.pm:1377
#, c-format
msgid "Auto-detected"
msgstr "Користуватися автовизначенням"

#: printer/printerdrake.pm:1387
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Мають бути вказаними або назва сервера, або його IP адреса!"

#: printer/printerdrake.pm:1391
#, c-format
msgid "Samba share name missing!"
msgstr "Немає назви спільного ресурсу samba!"

#: printer/printerdrake.pm:1397
#, c-format
msgid "SECURITY WARNING!"
msgstr "ПОПЕРЕДЖЕННЯ БЕЗПЕКИ!"

#: printer/printerdrake.pm:1398
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Ви збираєтесь налаштувати друк для рахунку Windows з паролем. Внаслідок "
"недеробки в архітектурі програми Samba-клієнт, пароль передається відкритим "
"текстом в командному рядку Samba-клієнта, який використовується для "
"відправлення завдання друку на сервер Windows. Тому кожний користувач цієї "
"машини може вивести пароль на екран з допомогою команди типу \"ps auxwww\".\n"
"\n"
"Ми рекомендуємо використовувати один із наступних варіантів (в будь- якому "
"разі Вам необхідно переконатися, що тільки машини із Вашої місцевої мережі "
"мають доступ до сервера Windows, наприклад, з допомогою захисного шлюза):\n"
"\n"
"Використовуйте на своєму сервері Windows рахунок без пароля, наприклад, "
"\"ГІСТЬ\", або спеціальний рахунок, призначений для друку. Не знімайте "
"захисту паролем з персонального рахунку або з рахунку адміністратора.\n"
"\n"
"Налаштуйте сервер Windows так, щоб друкарка була доступною по протоколу LPD. "
"Потім в Printerdrake налаштуйте друк з цієї машини з типом з'єднання \"%s"
"\".\n"
"\n"

#: printer/printerdrake.pm:1408
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Встановіть сервер Windows для того, щоб зробити друкарку доступною по "
"протоколу IPP і налаштуйте друк з цієї машини по з'єднанню типу \"%s\" в "
"Printerdrake.\n"
"\n"

#: printer/printerdrake.pm:1411
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Приєднайте Вашу друкарку до лінакс-сервера і дайте дозвіл Вашим Віндовс-"
"машинам приєднатися до нього як клієнти.\n"
"\n"
"Ви дійсно хочете продовжити встановлення цієї друкарки?"

#: printer/printerdrake.pm:1489
#, c-format
msgid "NetWare Printer Options"
msgstr "Параметри друкарки NetWare"

#: printer/printerdrake.pm:1490
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Для того, щоб друкувати на друкарці NetWare, Ви повинні вказати назву "
"сервера друку (зауважте, вона може відрізнятися від TCP/IP назви машини!) "
"разом з назвою друкарки, якою Ви хочете користуватися, та відповідним іменем "
"користувача з паролем."

#: printer/printerdrake.pm:1491
#, c-format
msgid "Printer Server"
msgstr "Сервер друкарки"

#: printer/printerdrake.pm:1492
#, c-format
msgid "Print Queue Name"
msgstr "Назва черги друку"

#: printer/printerdrake.pm:1497
#, c-format
msgid "NCP server name missing!"
msgstr "Немає назви сервера NCP!"

#: printer/printerdrake.pm:1501
#, c-format
msgid "NCP queue name missing!"
msgstr "Немає назви черги NCP!"

#: printer/printerdrake.pm:1574 printer/printerdrake.pm:1594
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", машина \"%s\", порт %s"

#: printer/printerdrake.pm:1577 printer/printerdrake.pm:1597
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Машина \"%s\", порт %s"

#: printer/printerdrake.pm:1618
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "Параметри друкарки TCP/Socket"

#: printer/printerdrake.pm:1620
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Виберіть одну із автовизначених друкарок із переліку, або введіть назву "
"машини або IP і, необов'язково, номер порта (типово 9100) в полях вводу."

#: printer/printerdrake.pm:1621
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Щоб друкувати на TCP- або сокет-друкарку, Вам потрібно надати назву машини "
"або IP-адресу друкарки і, необов'язково, номер порта (типово 9100). На "
"серверах HP JetDirect номер порта у більшості випадків 9100, на інших може "
"відрізнятись. Перегляньте інструкцію до апаратного забезпечення."

#: printer/printerdrake.pm:1625
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Немає назви в мережі або IP друкарки!"

#: printer/printerdrake.pm:1648
#, c-format
msgid "Printer host name or IP"
msgstr "Назва друкарки в мережі або IP"

#: printer/printerdrake.pm:1704
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "Поновлюю дані друкарок  ..."

#: printer/printerdrake.pm:1707 printer/printerdrake.pm:1709
#, c-format
msgid "Printer Device URI"
msgstr "Адреса пристрою друкарки"

#: printer/printerdrake.pm:1708
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Можна вказати безпосередньо адресу для доступу до друкарки. Адреса має\n"
"відповідати специфікаціям або CUPS, або Foomatic. Зауважте, однак, що\n"
"не всі типи адрес підтримуються засобами керування черг друку."

#: printer/printerdrake.pm:1731
#, c-format
msgid "A valid URI must be entered!"
msgstr "Потрібно ввести коректний URI!"

#: printer/printerdrake.pm:1834
#, c-format
msgid "Pipe into command"
msgstr "передати через канал в команду"

#: printer/printerdrake.pm:1835
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Тут Ви можете вказати будь-який командний рядок, в який повинно бути "
"переспрямоване завдання замість відсилання безпосередньо на друкарку."

#: printer/printerdrake.pm:1836
#, c-format
msgid "Command line"
msgstr "Командний рядок"

#: printer/printerdrake.pm:1840
#, c-format
msgid "A command line must be entered!"
msgstr "Потрібно ввести командний рядок!"

#: printer/printerdrake.pm:1873
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"Чи є Ваша друкарка багатофункціональним простроєм від HP або Sony "
"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 з сканером, DeskJet 450, "
"Sony IJP-V100), HP PhotoSmart або HP LaserJet 2200?"

#: printer/printerdrake.pm:1887
#, c-format
msgid "Installing HPOJ package..."
msgstr "Встановлення пакунка HPOJ..."

#: printer/printerdrake.pm:1894
#, c-format
msgid "Only printing will be possible on the %s."
msgstr "На %s буде можливий лише друк."

#: printer/printerdrake.pm:1903 printer/printerdrake.pm:2025
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "Перевіряється пристрій і налаштовується HPOJ..."

#: printer/printerdrake.pm:1946
#, c-format
msgid "Installing SANE packages..."
msgstr "Встановлюються пакунки SANE..."

#: printer/printerdrake.pm:1956
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr "Сканування на %s буде неможливе."

#: printer/printerdrake.pm:1983
#, c-format
msgid "Installing mtools packages..."
msgstr "Встановлюються пакунки mtools..."

#: printer/printerdrake.pm:1990
#, fuzzy, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""
"Доступ до карт пам'яті фото на Вашому багатофункціональному пристрої HP"

#: printer/printerdrake.pm:2005
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "Вивчення Вашого багатофункціонального пристрою HP"

#: printer/printerdrake.pm:2013
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""
"Доступ до карт пам'яті фото на Вашому багатофункціональному пристрої HP"

#: printer/printerdrake.pm:2062
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Встановлення доступності порта для CUPS..."

#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2315
#: printer/printerdrake.pm:2459
#, c-format
msgid "Reading printer database..."
msgstr "Читаю базу даних друкарок..."

#: printer/printerdrake.pm:2281
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Введіть назву друкарки і коментарі"

#: printer/printerdrake.pm:2285 printer/printerdrake.pm:3421
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
"Назва друкарки повинна складатися тільки з літер, цифр та символа "
"підкреслення"

#: printer/printerdrake.pm:2291 printer/printerdrake.pm:3426
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Друкарка з назвою \"%s\" вже існує.\n"
"Ви дійсно бажаєте переписати її конфіґурацію?"

#: printer/printerdrake.pm:2300
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Кожна друкарки повинна мати назву (наприклад, \"друкарка\"). Поля Опис та "
"Розташування заповнювати необов'язково. Вони є лиш коментарями для "
"користувачів."

#: printer/printerdrake.pm:2301
#, c-format
msgid "Name of printer"
msgstr "Назва друкарки"

#: printer/printerdrake.pm:2302 standalone/drakconnect:557
#: standalone/harddrake2:40 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Description"
msgstr "Опис"

#: printer/printerdrake.pm:2303 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Location"
msgstr "Розташування"

#: printer/printerdrake.pm:2320
#, c-format
msgid "Preparing printer database..."
msgstr "Готується база даних друкарок..."

#: printer/printerdrake.pm:2438
#, c-format
msgid "Your printer model"
msgstr "Модель Вашої друкарки"

#: printer/printerdrake.pm:2439
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake порівнює назву моделі, отриману в результаті автовизначення\n"
"друкарки, із списком друкарок у своїй базі даних і знаходить найкращу\n"
"відповідність. Такий вибір може бути помилковим, особливо, коли Вашої\n"
"друкарки зовсім немає в базі даних. Тому перевірте, чи вибір є правильним\n"
"і натисність \"Модель правильна\", а якщо ні, то натисність \"Вибрати "
"модель\n"
"вручну.\", щоб зробити вибір моделі Вашої друкарки вручну в наступному\n"
"екрані.\n"
"\n"
"Щодо Вашої друкарки Printerdrake знайшов:\n"
"\n"
"%s"

#: printer/printerdrake.pm:2444 printer/printerdrake.pm:2447
#, c-format
msgid "The model is correct"
msgstr "Модель правильна"

#: printer/printerdrake.pm:2445 printer/printerdrake.pm:2446
#: printer/printerdrake.pm:2449
#, c-format
msgid "Select model manually"
msgstr "Вибрати модель вручну"

#: printer/printerdrake.pm:2472
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Будь-ласка, переконайтеся, чи правильно Printerdrake визначив модель Вашої "
"друкарки. Знайдіть правильну модель в списку, якщо вибрано неправильну або "
"\"Друкарку необроблених даних\"."

#: printer/printerdrake.pm:2491
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr "Встановити файл PPD , наданий виробником"

#: printer/printerdrake.pm:2522
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""
"Кожна друкарка постачається з файлом PPD, який описує її можливості та "
"настройки."

#: printer/printerdrake.pm:2523
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""
"Цей файл звичайно знаходиться десь на диску з драйверами для Windows і Mac, "
"розповсюджуваному з друкаркою."

#: printer/printerdrake.pm:2524
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr "Ви також можете знайти файли PPD на веб-сайті виробника."

#: printer/printerdrake.pm:2525
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""
"Якщо на Вашому комп'ютері встановлено Windows, Ви можете знайти файл PPD "
"також на розділі з Windows."

#: printer/printerdrake.pm:2526
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""
"Встановлення файлу PPD та його використання при налаштуванні друкарки "
"зробить можливим використовувати всі можливі опції, які підтримує обладнання "
"друкарки"

#: printer/printerdrake.pm:2527
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""
"Тут Ви можете вибрати файл PPD для встановлення на Вашому комп'ютері, він "
"буде використовуватися при налаштуванні друкарки."

#: printer/printerdrake.pm:2529
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "Встановити rpm"

#: printer/printerdrake.pm:2531 printer/printerdrake.pm:2538
#: standalone/scannerdrake:180 standalone/scannerdrake:188
#: standalone/scannerdrake:239 standalone/scannerdrake:246
#, fuzzy, c-format
msgid "CD-ROM"
msgstr "CDROM"

#: printer/printerdrake.pm:2532 printer/printerdrake.pm:2540
#: standalone/scannerdrake:181 standalone/scannerdrake:190
#: standalone/scannerdrake:240 standalone/scannerdrake:248
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "Дискета"

#: printer/printerdrake.pm:2533 printer/printerdrake.pm:2542
#: standalone/scannerdrake:182 standalone/scannerdrake:192
#: standalone/scannerdrake:241 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Other place"
msgstr "Інші порти"

#: printer/printerdrake.pm:2548
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "Виберіть файл"

#: printer/printerdrake.pm:2552
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr "Файл PPD %s не існує або недоступний!"

#: printer/printerdrake.pm:2558
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr "Файл PPD %s не відповідає специфікаціям PPD!"

#: printer/printerdrake.pm:2569
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "Встановлення %s ..."

#: printer/printerdrake.pm:2682
#, c-format
msgid "OKI winprinter configuration"
msgstr "Конфігурація Віндовс-друкарки OKI"

#: printer/printerdrake.pm:2683
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Ви налаштовуєте лазерну Віндовс-друкарку Oki. Ці друкарки\n"
"використовують дуже особливий протокол обміну і через це можуть працювати "
"тільки на першому паралельному порті. Якщо Вашу друкарку під'єднано до "
"іншого порта або до сервера друку, під'єднайте її до першого паралельного "
"порта перед друком тестової сторінки. В іншому випадку друкарка не буде "
"працювати. Таке під'єднання буде проігнороване драйвером."

#: printer/printerdrake.pm:2707 printer/printerdrake.pm:2736
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Конфігурація Lexmark inkjet"

#: printer/printerdrake.pm:2708
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Драйвери друкарок inkjet, які надаються Lexmark, підтримують тільки локальні "
"друкарки, але не друкарки на віддалених машинах або серверних стойках. Будь-"
"ласка, під'єднайте свою друкарку до локального порта або налаштуйте її на "
"машині, до якої вона під'єднана."

#: printer/printerdrake.pm:2737
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Щоб могти друкувати на струменевій друкарці Lexmark при цій конфігурації Вам "
"потрібно встановити драйвери, що надає Lexmark (http://www.lexmark.com/). "
"Натисніть на посиланні \"Drivers\". Потім виберіть модель і після всього "
"\"Linux\" як операційну систему. Драйвери надаються у вигляді пакунків RPM "
"або скриптів командної оболонки і діалоговим графічним встановленням. Вам "
"немає потреби виконувати налаштування з допомогою графічної оболонки. "
"Відмініть його одразу після ліцензійної угоди. Тоді надрукуйте сторінки для "
"регулювання друкуючої головки з допомогою \"lexmarkmaintain\" і "
"підкоректуйте з допомогою цієї програми розташування головки."

#: printer/printerdrake.pm:2746
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "Конфігурація Lexmark inkjet"

#: printer/printerdrake.pm:2747
#, fuzzy, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""
"Драйвери друкарок inkjet, які надаються Lexmark, підтримують тільки локальні "
"друкарки, але не друкарки на віддалених машинах або серверних стойках. Будь-"
"ласка, під'єднайте свою друкарку до локального порта або налаштуйте її на "
"машині, до якої вона під'єднана."

#: printer/printerdrake.pm:2765
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "Звантаження виробника для HP LaserJet 1000"

#: printer/printerdrake.pm:2878
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Типові встановлення друкарки\n"
"\n"
"Вам потрібно переконатися, що розмір сторінки та тип_чорнила/режим_друку "
"(якщо існують), а також апаратні налаштування лазерних друкарок (пам'ять, "
"спарений модуль, додаткові податчики) встановлені вірно. Зауважте, що "
"швидкість друку з високою якістю/роздільністю може бути значно повільнішою."

#: printer/printerdrake.pm:3003
#, c-format
msgid "Printer default settings"
msgstr "Типові налаштування друкарки"

#: printer/printerdrake.pm:3010
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Параметр %s має бути цілим числом!"

#: printer/printerdrake.pm:3014
#, c-format
msgid "Option %s must be a number!"
msgstr "Параметр %s має бути числом!"

#: printer/printerdrake.pm:3018
#, c-format
msgid "Option %s out of range!"
msgstr "Параметр %s виходить за рамки дозволених меж!"

#: printer/printerdrake.pm:3069
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Ви хочете зробити цю друкарку (\"%s\")\n"
"типовою?"

#: printer/printerdrake.pm:3084
#, c-format
msgid "Test pages"
msgstr "Тестові сторінки"

#: printer/printerdrake.pm:3085
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Виберіть, будь ласка, тестові сторінки, які Ви хочете надрукувати.\n"
"Зауважте: друк фотографічних тестових сторінок може бути тривалим і\n"
"на лазерних друкарках з невеликим об'ємом пам'яті може навіть не\n"
"відбутися. У більшості випадків буде достатньо надрукувати\n"
"стандартну тестову сторінку."

#: printer/printerdrake.pm:3089
#, c-format
msgid "No test pages"
msgstr "Немає тестових сторінок"

#: printer/printerdrake.pm:3090
#, c-format
msgid "Print"
msgstr "Друкувати"

#: printer/printerdrake.pm:3115
#, c-format
msgid "Standard test page"
msgstr "Стандартна тестова сторінка"

#: printer/printerdrake.pm:3118
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Додаткова тестова сторінка (Letter)"

#: printer/printerdrake.pm:3121
#, c-format
msgid "Alternative test page (A4)"
msgstr "Додаткова тестова сторінка (A4)"

#: printer/printerdrake.pm:3123
#, c-format
msgid "Photo test page"
msgstr "Тестова сторінка фотографічної якості"

#: printer/printerdrake.pm:3127
#, c-format
msgid "Do not print any test page"
msgstr "Не друкувати тестової сторінки"

#: printer/printerdrake.pm:3135 printer/printerdrake.pm:3300
#, c-format
msgid "Printing test page(s)..."
msgstr "Друкую тестову сторінку(сторінки)..."

#: printer/printerdrake.pm:3150
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "Встановлюється пакунок %s"

#: printer/printerdrake.pm:3152
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "Тестова сторінка фотографічної якості"

#: printer/printerdrake.pm:3169
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Тестова сторінка передана програмі друку.\n"
"Перед тим, як друкарка почне друкувати, можливо пройде \n"
"деякий час.\n"
"Статус друку:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3173
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Тестова сторінка передана програмі друку.\n"
"Перед тим, як друкарка почне друкувати, можливо пройде\n"
"деякий час. Чи вона працює коректно?\n"

#: printer/printerdrake.pm:3180
#, c-format
msgid "Did it work properly?"
msgstr "Спрацювало нормально?"

#: printer/printerdrake.pm:3201 printer/printerdrake.pm:4397
#, c-format
msgid "Raw printer"
msgstr "Друкарка необроблених даних"

#: printer/printerdrake.pm:3231
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Щоб друкувати файл з командного рядка (вікна терминала), Ви можете "
"використати команду \"%s <файл>\", або графічну сервісну програму: \"xpp "
"<файл>\", або \"kprinter <файл>\". Графічні сервісні програми дають "
"можливість вибрати друкарку і легко змінити параметри.\n"

#: printer/printerdrake.pm:3233
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ці команди Ви також можете використовувати у полі \"Команди друку\" в "
"діалозі друкування багатьох програм, але тут не підтримуються назви файлів, "
"тому що файли до друку вказуються програмою.\n"

#: printer/printerdrake.pm:3236 printer/printerdrake.pm:3253
#: printer/printerdrake.pm:3263
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"Команда \"%s\" також дає змогу змінити установки параметрів для окремого "
"завдання друку. Просто додайте бажане значення в командний рядок, напр. \"%s "
"<file>\". "

#: printer/printerdrake.pm:3239 printer/printerdrake.pm:3279
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Щоб довідатися про доступні параметри на цій друкарці, читайте список нижче, "
"або натисніть на кнопку \"Параметри друку\" .%s%s%s\n"
"\n"

#: printer/printerdrake.pm:3243
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Тут показано список параметрів друку для поточної друкарки:\n"
"\n"

#: printer/printerdrake.pm:3248 printer/printerdrake.pm:3258
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Щоб роздрукувати файл з командного рядка (вікна терміналу), використайте "
"команду \"%s <file>\".\n"

#: printer/printerdrake.pm:3250 printer/printerdrake.pm:3260
#: printer/printerdrake.pm:3270
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Цю команду Ви також можете використовувати в полі \"Команда друку\" діалогу "
"друку багатьох програм. Але назви файлів тут не вказуються, тому що файл для "
"друку надається програмою.\n"

#: printer/printerdrake.pm:3255 printer/printerdrake.pm:3265
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Щоб отримати список можливих параметрів для даної друкарки, натисніть кнопку "
"\"Список параметрів друкарки\"."

#: printer/printerdrake.pm:3268
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Для друку файла з командного рядка (вікна термінала) використовуйте команду "
"\"%s <file>\" або \"%s <file>\".\n"

#: printer/printerdrake.pm:3272
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Також Ви можете використовувати графічний інтерфейс \"xpdq\" для "
"встановлення параметрів і керування чергою друку.\n"
"Якщо Ви використовуєте KDE як оточення стільниці, Ви матимете \"кнопку зупину"
"\", іконку на стільниці, підписану \"Зупинити друкарку\", яка зупинятиме всі "
"завдання друку негайно, як тільки Ви на неї натиснете. Це, для прикладу, "
"може використовуватися при заминаннях паперу.\n"

#: printer/printerdrake.pm:3276
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Команди \"%s\" і \"%s\" також дозволяють змінити параметри окремого завдання "
"друку. Просто додайте бажаний параметр в командному рядку, наприклад, \"%s "
"<file>\".\n"

#: printer/printerdrake.pm:3286
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Друк/Сканування/Фотокартки на \"%s\""

#: printer/printerdrake.pm:3287
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Друк/Сканування на \"%s\""

#: printer/printerdrake.pm:3289
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Друк/Доступ до фотокарток на \"%s\""

#: printer/printerdrake.pm:3290
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Друк на друкарці \"%s\""

#: printer/printerdrake.pm:3293 printer/printerdrake.pm:3296
#: printer/printerdrake.pm:3297 printer/printerdrake.pm:3298
#: printer/printerdrake.pm:4384 standalone/drakTermServ:324
#: standalone/drakbackup:4265 standalone/drakbug:177 standalone/drakfont:500
#: standalone/drakfont:591 standalone/net_monitor:106
#: standalone/printerdrake:508
#, c-format
msgid "Close"
msgstr "Закрити"

#: printer/printerdrake.pm:3296
#, c-format
msgid "Print option list"
msgstr "Список параметрів друкарки"

#: printer/printerdrake.pm:3317
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Ваш багатофункціональний пристрій було автоматично налаштовано для "
"сканування. Зараз Ви можете сканувати з допомогою програми \"scanimage"
"\" (\"scanimage -d hp:%s\", щоб вкзати сканер, якщо їх більше одного) з "
"командного рядка або через графічні інтерфейси \"xscanimage\" или \"xsane\". "
"Якщо Ви використовуєте GIMP, також можете сканувати, вибравши відповідну "
"команду в меню \"Файл\"/\"Імпорт\". Запустіть також в командному рядку \"man "
"scanimage\", щоб отримати додаткову інформацію.\n"
"\n"
"Не використовуйту \"scannerdrake\" для цього пристрою!"

#: printer/printerdrake.pm:3343
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"Ваша друкарка була налаштована автоматично, щоб надати доступ до дисків з "
"фотокартками з ПК. Зараз Ви можете мати доступ до фотокарток з допомогою "
"графічної програми \"MtoolsFM\" (меню: \"Програми\" -> \"Файлові інструменти"
"\" -> \"Файловий менеджер Mtools\") або утиліти для командного рядка \"mtools"
"\" (введіть в командному рядку \"man mtools\" для отримання додаткової "
"інформації). Ви знайдете файловую систему з картками під буквою \"p:\" або "
"під наступними буквами диска, якщо у Вас бульше, ніж одна друкарка HP с "
"дисками фотокарток. В \"MtoolsFM\" Ви можете перемикатися між буквами дисків "
"в полі, розташованому в правому верхньому куті списка файлів."

#: printer/printerdrake.pm:3365 printer/printerdrake.pm:3767
#, c-format
msgid "Reading printer data..."
msgstr "Читаю дані друкарки..."

#: printer/printerdrake.pm:3385 printer/printerdrake.pm:3412
#: printer/printerdrake.pm:3447
#, c-format
msgid "Transfer printer configuration"
msgstr "Перенести налаштування друкарки"

#: printer/printerdrake.pm:3386
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Ви можете скопіювати конфігурацію друкарки, яка була підготовлена для черги %"
"s, в %s, Вашу поточну чергу. Всі установочні дані (назва\n"
"друкарки, опис, розташування, тип з'єднання і стандартні установки)\n"
"будуть перенесені на нову конфіґурацію, але роботи з черги перенесено\n"
"не буде.\n"
"Не всі черги можуть бути перенесеними з таких причин: \n"

#: printer/printerdrake.pm:3389
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS не підтримує друкарки на серверах Novell чи друкарок, що передають дані "
"на друк у вигляді команд з довільним синтаксисом.\n"

#: printer/printerdrake.pm:3391
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ підтримує тільки локальні друкарки, віддалені друкарки LDP і\n"
"друкарки, що працюють через Socket/TCP.\n"

#: printer/printerdrake.pm:3393
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD та LPRng не підтримують друкарок IPP.\n"

#: printer/printerdrake.pm:3395
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"На додаток, черги не формуються цією програмою або конфіґурація\n"
"\"foomatic-configure\" не може бути перенесена."

#: printer/printerdrake.pm:3396
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Крім того, друкарки, сконфіґуровані за допомогою наданих виробниками\n"
"файлів PPD чи рідних драйверів CUPS, не можуть бути перенесеними."

#: printer/printerdrake.pm:3397
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Позначте друкарки, які Ви хочете перенести, і натисніть\n"
"\"Перенести\"."

#: printer/printerdrake.pm:3400
#, c-format
msgid "Do not transfer printers"
msgstr "Не переносити друкарки"

#: printer/printerdrake.pm:3401 printer/printerdrake.pm:3417
#, c-format
msgid "Transfer"
msgstr "Перенести"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"Друкарка з назвою \"%s\" вже існує в \"%s\". Натисніть \"Перенести\" щоб\n"
"переписати її визначення. Ви можете також ввести нову назву чи\n"
"пропустити цю друкарку."

#: printer/printerdrake.pm:3434
#, c-format
msgid "New printer name"
msgstr "Нова назва друкарки"

#: printer/printerdrake.pm:3437
#, c-format
msgid "Transferring %s..."
msgstr "Переношу %s ..."

#: printer/printerdrake.pm:3448
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Ви перенесли Вашу колишню основну друкарку (\"%s\"). Залишити\n"
"цю друкарку основною і в новій системі друку %s?"

#: printer/printerdrake.pm:3458
#, c-format
msgid "Refreshing printer data..."
msgstr "Поновлюю дані друкарок  ..."

#: printer/printerdrake.pm:3467
#, c-format
msgid "Starting network..."
msgstr "Вмикається мережа..."

#: printer/printerdrake.pm:3508 printer/printerdrake.pm:3512
#: printer/printerdrake.pm:3514
#, c-format
msgid "Configure the network now"
msgstr "Налаштувати мережу зараз"

#: printer/printerdrake.pm:3509
#, c-format
msgid "Network functionality not configured"
msgstr "Мережа не налаштована для роботи"

#: printer/printerdrake.pm:3510
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Ви збираєтесь налаштувати віддалену друкарку. Для цього необхідний доступ до "
"працюючої мережі, але Ваша мережа ще не налаштована. Якщо Ви продовжите без "
"налаштування мережі, Ви не зможете використовувати друкарку, яку зараз "
"налаштовуєте. Як Ви хочете продовжувати?"

#: printer/printerdrake.pm:3513
#, c-format
msgid "Go on without configuring the network"
msgstr "Продовжити без налаштування мережі"

#: printer/printerdrake.pm:3547
#, fuzzy, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"Мережу, налаштовану під час встановлення, неможливо зараз стартувати. "
"Перевірте, будь-ласка, чи мережа є доступною після завантаження системи і "
"правильно налаштованою в Центрі керування Мандрейк, розділ \"Мережа та "
"інтернет\"/\"З'єднання\", і після цього встановіть друкарку, також "
"використовуючи Центр керування Мандрейк, розділ \"Залізо\"/ \"Друкарка\""

#: printer/printerdrake.pm:3548
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Доступу до мережі немає і не може бути увімкненим. Будь-ласка, перевірте "
"конфігурацію і обладнання. Після цього знову налаштуйте свою віддалену "
"друкарку."

#: printer/printerdrake.pm:3558
#, c-format
msgid "Restarting printing system..."
msgstr "Перезапускається система друку..."

#: printer/printerdrake.pm:3597
#, c-format
msgid "high"
msgstr "високий"

#: printer/printerdrake.pm:3597
#, c-format
msgid "paranoid"
msgstr "параноїдальний"

#: printer/printerdrake.pm:3598
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Встановлюю систему друкування на рівні безпеки %s"

#: printer/printerdrake.pm:3599
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Ви встановлюєте систему друку %s на систему, запущену з рівнем безпеки %s.\n"
"\n"
"Система друку запускає службу (фоновий процес), яка очікує на завдання друку "
"і керує ними. Ця служба також доступна для віддалених машин по мережі і "
"через це є можливою ціллю для атак. Тому на цьому рівні безпеки типово "
"запускаються тільки декілька вибраних сервісів.\n"
"\n"
"Ви дійсно хочете налаштувати друк на цій машині?"

#: printer/printerdrake.pm:3633
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Запуск системи друку під час завантаження"

#: printer/printerdrake.pm:3634
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Система друку (%s) не буде стартувати автоматично при запуску машини.\n"
"\n"
"Можливо, автоматичний запуск було відімкнено при переході на вищий рівень "
"безпеки, оскільки система друку є потенційним об'єктом атак.\n"
"\n"
"Чи хочете Ви знову увімкнути автоматичний старт системи друку?"

#: printer/printerdrake.pm:3655 printer/printerdrake.pm:3889
#, c-format
msgid "Checking installed software..."
msgstr "Перевірка встановленого програмного забезпечення..."

#: printer/printerdrake.pm:3661
#, c-format
msgid "Removing %s ..."
msgstr "Видалення %s ..."

#: printer/printerdrake.pm:3665
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "Змінити систему друку"

#: printer/printerdrake.pm:3674
#, c-format
msgid "Installing %s ..."
msgstr "Встановлення %s ..."

#: printer/printerdrake.pm:3678
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "Змінити систему друку"

#: printer/printerdrake.pm:3727
#, c-format
msgid "Setting Default Printer..."
msgstr "Встановлюється типова друкарка..."

#: printer/printerdrake.pm:3747
#, c-format
msgid "Select Printer Spooler"
msgstr "Виберіть чергу друку для друкарки"

#: printer/printerdrake.pm:3748
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Яку систему друку (чергу) Ви хочете використовувати?"

#: printer/printerdrake.pm:3799
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Помилка при налаштуванні друкарки \"%s\"..."

#: printer/printerdrake.pm:3812
#, c-format
msgid "Installing Foomatic..."
msgstr "Встановлення Foomatic..."

#: printer/printerdrake.pm:3818
#, fuzzy, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""
"Неможливо встановити пакунки, необхідні для організації спільного доступу до "
"сканерів."

#: printer/printerdrake.pm:3910
#, fuzzy, c-format
msgid "Could not install necessary packages, %s cannot be started!"
msgstr ""
"Неможливо встановити пакунки, необхідні для встановлення сканерів з "
"допомогою Scannerdrake."

#: printer/printerdrake.pm:4011
#, fuzzy, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"Сконфіґуровані наступні друкарки. Клацніть двічі на друкарці, щоб змінити її "
"налаштування; щоб зробити її поточною; або переглянути інформацію про неї."

#: printer/printerdrake.pm:4039
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "Вивести список усіх віддалених друкарок CUPS"

#: printer/printerdrake.pm:4040
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "Поновити список друкарок (відобразити всі віддалені CUPS-друкарки)"

#: printer/printerdrake.pm:4050
#, c-format
msgid "CUPS configuration"
msgstr "Конфіґурація CUPS"

#: printer/printerdrake.pm:4062
#, c-format
msgid "Change the printing system"
msgstr "Змінити систему друку"

#: printer/printerdrake.pm:4071
#, c-format
msgid "Normal Mode"
msgstr "Нормальний режим"

#: printer/printerdrake.pm:4072
#, c-format
msgid "Expert Mode"
msgstr "Експертний режим"

#: printer/printerdrake.pm:4343 printer/printerdrake.pm:4398
#: printer/printerdrake.pm:4479 printer/printerdrake.pm:4489
#, c-format
msgid "Printer options"
msgstr "Параметри друкарки"

#: printer/printerdrake.pm:4379
#, c-format
msgid "Modify printer configuration"
msgstr "Змінити конфігурацію друкарки"

#: printer/printerdrake.pm:4381
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Друкарка %s\n"
"Що Ви хочете змінити для цієї друкарки?"

#: printer/printerdrake.pm:4385
#, c-format
msgid "Do it!"
msgstr "Виконати!"

#: printer/printerdrake.pm:4390 printer/printerdrake.pm:4448
#, c-format
msgid "Printer connection type"
msgstr "Тип під'єднання друкарки"

#: printer/printerdrake.pm:4391 printer/printerdrake.pm:4452
#, c-format
msgid "Printer name, description, location"
msgstr "Назва, опис, розташування друкарки"

#: printer/printerdrake.pm:4393 printer/printerdrake.pm:4471
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Виробник друкарки, модель, драйвер"

#: printer/printerdrake.pm:4394 printer/printerdrake.pm:4472
#, c-format
msgid "Printer manufacturer, model"
msgstr "Виробник друкарки, модель"

#: printer/printerdrake.pm:4400 printer/printerdrake.pm:4483
#, c-format
msgid "Set this printer as the default"
msgstr "Встановити друкарку основною"

#: printer/printerdrake.pm:4402 printer/printerdrake.pm:4490
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Додати цю друкарку до Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4403 printer/printerdrake.pm:4495
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Вилучити цю друкарку з Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4404 printer/printerdrake.pm:4500
#, c-format
msgid "Print test pages"
msgstr "Друкувати тестові сторінки"

#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4502
#, c-format
msgid "Learn how to use this printer"
msgstr "Вивчити, як використовувати цю друкарку"

#: printer/printerdrake.pm:4406 printer/printerdrake.pm:4504
#, c-format
msgid "Remove printer"
msgstr "Вилучити друкарку"

#: printer/printerdrake.pm:4460
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Вилучається стара друкарка \"%s\"..."

#: printer/printerdrake.pm:4491
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Додається друкарка до Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4493
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
"Друкарку \"%s\" було успішно додано до Star Office/OpenOffice.org/GIMP."

#: printer/printerdrake.pm:4494
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
"Додавання друкарки \"%s\" в Star Office/OpenOffice.org/GIMP завершилось "
"невдало."

#: printer/printerdrake.pm:4496
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Видалення друкарки з Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4498
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""
"Друкарку \"%s\" було успішно видалено з Star Office/OpenOffice.org/GIMP."

#: printer/printerdrake.pm:4499
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
"Видалення друкарки \"%s\" з Star Office/OpenOffice.org/GIMP завершилось "
"невдало."

#: printer/printerdrake.pm:4543
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Ви справді хочете видалити друкарку \"%s\"?"

#: printer/printerdrake.pm:4547
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Вилучаю друкарку \"%s\" ..."

#: printer/printerdrake.pm:4571
#, c-format
msgid "Default printer"
msgstr "Стандартна друкарка"

#: printer/printerdrake.pm:4572
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Друкарку \"%s\" зараз встановлено основною."

#: raid.pm:37
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Не можу додати розділу до _форматованого_ RAID md%d"

#: raid.pm:139
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "збій у mkraid (можливо, не встановлені raidtools?)"

#: raid.pm:139
#, c-format
msgid "mkraid failed"
msgstr "збій у mkraid"

#: raid.pm:155
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Недостатньо розділів для RAID рівня %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr "Не можу створити теку /usr/share/sane/firmware!"

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""
"Не можу скопіювати файл мікропрограми %s в теку /usr/share/sane/firmware!"

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr "Не можу встановити права доступу до файлу мікропрограми %s!"

#: scanner.pm:200 standalone/scannerdrake:65 standalone/scannerdrake:69
#: standalone/scannerdrake:77 standalone/scannerdrake:339
#: standalone/scannerdrake:414 standalone/scannerdrake:458
#: standalone/scannerdrake:462 standalone/scannerdrake:484
#: standalone/scannerdrake:549
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:915
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""
"Неможливо встановити пакунки, необхідні для організації спільного доступу до "
"сканерів."

#: scanner.pm:202
#, fuzzy, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr "Ваші сканери не будуть доступними в мережі."

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr "Прийняти/Відкинути повідомлення про помилку bogus IPv4."

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr " Приймати/Відкидати оповіщувальні icmp echo."

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr " Приймати/Відкидати icmp echo."

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr "Дозволити/Заборонити автореєстрацію."

#: security/help.pm:19
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"Якщо встановлено у \"ВСЕ\", /etc/issue і /etc/issue.net are можуть "
"існувати.\n"
"\n"
"Якщо встановлено в НІ, issue не дозволені.\n"
"\n"
"Інакше дозволено /etc/issue."

#: security/help.pm:25
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr "Дозволити/Заборонити перезавантаження консольним користувачем."

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "Дозволити/Заборонити реєстрацію віддаленого користувача root."

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "Дозволити/Заборонити безпосередню реєстрацію користувача root."

#: security/help.pm:31
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Дозволити/Заборонити список користувачів системи в менеджерех дисплею (kdm і "
"gdm)."

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Дозволяє/Забороняє X-з'єднання:\n"
"\n"
"- ALL (всі з'єднання дозволені),\n"
"\n"
"- LOCAL (тільки з'єднання з місцевої машини),\n"
"\n"
"- NONE (немає з'єднань)."

#: security/help.pm:41
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"Аргумент вказує, чи мають клієнти дозвіл на під'єднання до X сервера\n"
"з мережі через порт tcp 6000, чи ні."

#: security/help.pm:44
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"Дозволяти:\n"
"\n"
"- всі служби, що контролюються tcp_wrappers (див. hosts.deny(5) man page), "
"якщо встановлено у \"ВСІ\",\n"
"\n"
"- тільки локальні, якщо встановлено в \"ЛОКАЛЬНІ\"\n"
"\n"
"- ніякі, якщо встановлено в \"НІЧОГО\".\n"
"\n"
"Щоб дозволити служби, які Вам потрібні, використовуйту /etc/hosts.allow (see "
"hosts.allow (5))."

#: security/help.pm:54
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"Якщо SERVER_LEVEL (або SECURE_LEVEL, якщо немає)\n"
"є більшим за 3 в /etc/security/msec/security.conf, створює\n"
"посилання на /etc/security/msec/server, щоб помістити в\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"/etc/security/msec/server використовується chkconfig --додайте, якщо\n"
"вирішете додати службу, якщо він є у файлі під час встановлення\n"
"пакунків."

#: security/help.pm:63
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Увімкнути/Вимкнути crontab і at для користувачів.\n"
"\n"
"Помістити дозволених користувачів у /etc/cron.allow і /etc/at.allow\n"
"(дивіться man at(1) і crontab(1))."

#: security/help.pm:68
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr "Увімкнути/Вимкнути звіти системного журналу на консоль 12"

#: security/help.pm:70
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""
"Увімкнути/Вимкнути захист маскування назв. Якщо\n"
"\"alert\" встановлено в true, також робиться звіт в syslog."

#: security/help.pm:73
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr "Увімкнути/Вимкнути захист від маскування IP."

#: security/help.pm:75
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr "Увімкнути/Вимкнути libsafe, якщо libsafe знайдено в системі."

#: security/help.pm:77
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "Увімкнути/Вимкнути ведення журналу невідомих пакунків IPv4."

#: security/help.pm:79
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr "Увімкнути/вимкнути щогодинну перевірку безпеки msec."

#: security/help.pm:81
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
" Дозволяє su тільки для членів групи wheel або для будь-якого користувача."

#: security/help.pm:83
#, c-format
msgid "Use password to authenticate users."
msgstr "Використовувти пароль для розпізнавання користувачів."

#: security/help.pm:85
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr "Увімкнути/Вимкнути перевірку різнорідності карт ethernet."

#: security/help.pm:87
#, c-format
msgid " Activate/Disable daily security check."
msgstr " Увімкнути/Вимкнути щоденну перевірку безпеки."

#: security/help.pm:89
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr "Увімкнути/Вимкнути sulogin(8) на однокористувацькому рівні."

#: security/help.pm:91
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr "Додати name як виняток до керування терміном дії пароля командою msec."

#: security/help.pm:93
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""
"Встановлює термін дії пароля в \"max\" днів і затримку зміни в \"inactive\"."

#: security/help.pm:95
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""
"Встановити довжину історії паролів, щоб уникнути повторного використання "
"пароля."

#: security/help.pm:97
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Встановити мінімальну довжину пароля, мінімальну кількість цифр і мінімальну "
"кількість великих літер."

#: security/help.pm:99
#, c-format
msgid "Set the root umask."
msgstr "Встановити маску користувача root."

#: security/help.pm:100
#, c-format
msgid "if set to yes, check open ports."
msgstr "якщо встановлено в 'так', перевіряє відкриті порти."

#: security/help.pm:101
#, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"якщо встановлено в так, перевіряє :\n"
"\n"
"- порожні паролі,\n"
"\n"
"- чи є паролі в /etc/shadow\n"
"\n"
"- чи є користувачі з 0 id, іншим, ніж root."

#: security/help.pm:108
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"якщо встановлено в так, то перевіряє права доступу до файлів у домівці "
"користувача."

#: security/help.pm:109
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
"якщо встановлено в так, перевіряє, чи мережеві пристрої працюють в "
"різнотипних режимах."

#: security/help.pm:110
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "якщо встановлено в 'так', виконує щоденні перевірки безпеки."

#: security/help.pm:111
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "якщо встановлено в так, помітьте додатки/переміщувані файлів sgid."

#: security/help.pm:112
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "якщо встановлено в 'так', перевіряє порожні паролі в /etc/shadow."

#: security/help.pm:113
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "якщо встановлено в так, перевіряє контрольну суму файлів suid/sgid."

#: security/help.pm:114
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
"якщо встановлено в так, перевіряє додатки/переміщувані файлів адміністратора."

#: security/help.pm:115
#, c-format
msgid "if set to yes, report unowned files."
msgstr "якщо встановлено в 'так', повідомляє про файли без власників."

#: security/help.pm:116
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"якщо встановлено в 'так', перевіряє для всіх права записту у файли/теки."

#: security/help.pm:117
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "якщо встановлено в 'так', виконує перевірки chkrootkit."

#: security/help.pm:118
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""
"якщо встановлено, відсилає поштове повідомлення на цю поштову адресу, ще "
"відсилає його rootу."

#: security/help.pm:119
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "якщо встановлено в Так, то повідомити результат перевірки поштою."

#: security/help.pm:120
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr "Не відсилати листи, якщо нема про що попереджувати"

#: security/help.pm:121
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "якщо встановлено в 'так', виконує деякі перевірки бази даних rpm."

#: security/help.pm:122
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "якщо встановлено в 'так', то повідомляє результат перевірки в syslog."

#: security/help.pm:123
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "якщо встановлено в так, то повідомляє про результат перевірки на tty."

#: security/help.pm:125
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Встановити розмір історії команд оболонки. Величина -1 означає відсутність "
"обмеження."

#: security/help.pm:127
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
"Встановити затримку командного процесора. Нульова величина означає "
"відсутність затримки."

#: security/help.pm:127
#, c-format
msgid "Timeout unit is second"
msgstr "Час чекання в секундах"

#: security/help.pm:129
#, c-format
msgid "Set the user umask."
msgstr "Встановити маску користувача."

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr "Прийняти повідомлення про фіктивні помилки IPv4"

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr "Прийняти оповіщувальне ехо icmp"

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr "Прийняти ехо icmp"

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr "/etc/issue* існує"

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr "Перезавантаження консольним користувачем"

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr "Дозволити реєстрацію віддаленого користувача root"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr "Пряма реєстрація root"

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr "Показувати список користувачів в менеджерех дисплею (kdm і gdm)."

#: security/l10n.pm:20
#, c-format
msgid "Allow X Window connections"
msgstr "Дозволити з'єднання X Window"

#: security/l10n.pm:21
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr "Дозволити TCP-з'єднання з X Window"

#: security/l10n.pm:22
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr "Дозволити всі сервіси, що контролюються tcp_wrappers"

#: security/l10n.pm:23
#, c-format
msgid "Chkconfig obey msec rules"
msgstr "Chkconfig з дотриманням правил msec"

#: security/l10n.pm:24
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr "Увімкнути \"crontab\" і \"at\" для користувачів"

#: security/l10n.pm:25
#, c-format
msgid "Syslog reports to console 12"
msgstr "Системний журнал генерує звіт на консоль 12"

#: security/l10n.pm:26
#, c-format
msgid "Name resolution spoofing protection"
msgstr "Захист від маскарадингу назв"

#: security/l10n.pm:27
#, c-format
msgid "Enable IP spoofing protection"
msgstr "Увімкнути захист імітації IP"

#: security/l10n.pm:28
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr "Увімкнути/Вимкнути libsafe, якщо libsafe знайдено в системі."

#: security/l10n.pm:29
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr "Увімкнути ведення журналу підозрілих пакунків IPv4"

#: security/l10n.pm:30
#, c-format
msgid "Enable msec hourly security check"
msgstr "Увімкнути щогодинну перевірку безпеки msec"

#: security/l10n.pm:31
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""
"Увімкнути su тільки для членів групи wheel, або для будь-якого користувача"

#: security/l10n.pm:32
#, c-format
msgid "Use password to authenticate users"
msgstr "Використовувати пароль для розпізнавання користувачів"

#: security/l10n.pm:33
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr "Перевірка різнорідності карт ethernet."

#: security/l10n.pm:34
#, c-format
msgid "Daily security check"
msgstr "Щоденна перевірка безпеки"

#: security/l10n.pm:35
#, c-format
msgid "Sulogin(8) in single user level"
msgstr "Sulogin(8) в однокористувацькому рівні"

#: security/l10n.pm:36
#, c-format
msgid "No password aging for"
msgstr "Немає терміну дії пароля для"

#: security/l10n.pm:37
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr "Встановити термін дії пароля і облік призупинень активності"

#: security/l10n.pm:38
#, c-format
msgid "Password history length"
msgstr "Довжина історії пароля"

#: security/l10n.pm:39
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr "Найменша довжина пароля і кількість цифр і великих літер"

#: security/l10n.pm:40
#, c-format
msgid "Root umask"
msgstr "Маска користувача root"

#: security/l10n.pm:41
#, c-format
msgid "Shell history size"
msgstr "Розмір історії командної оболонки"

#: security/l10n.pm:42
#, c-format
msgid "Shell timeout"
msgstr "Затримка командної оболонки"

#: security/l10n.pm:43
#, c-format
msgid "User umask"
msgstr "Маска користувача"

#: security/l10n.pm:44
#, c-format
msgid "Check open ports"
msgstr "Перевірити відкриті порти"

#: security/l10n.pm:45
#, c-format
msgid "Check for unsecured accounts"
msgstr "Перевірити на незахищені рахунки"

#: security/l10n.pm:46
#, c-format
msgid "Check permissions of files in the users' home"
msgstr "Перевірити права доступу файлів у домівці користувача"

#: security/l10n.pm:47
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr "Перевіряє, чи мережеві пристрої знаходяться в різних режимах"

#: security/l10n.pm:48
#, c-format
msgid "Run the daily security checks"
msgstr "Запустити щоденні перевірки безпеки"

#: security/l10n.pm:49
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "Помітити додатки/переміщувані файлів sgid"

#: security/l10n.pm:50
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr "Виберіть порожній пароль в /etc/shadow"

#: security/l10n.pm:51
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "Перевірити контрольну суму файлів suid/sgid"

#: security/l10n.pm:52
#, c-format
msgid "Check additions/removals of suid root files"
msgstr "Перевіряє додатки/переміщувані файлів адміністратора."

#: security/l10n.pm:53
#, c-format
msgid "Report unowned files"
msgstr "Звітувати про файли без власників"

#: security/l10n.pm:54
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "Перевірити файли/теки, доступні для запису всім"

#: security/l10n.pm:55
#, c-format
msgid "Run chkrootkit checks"
msgstr "Виконати перевірки chkrootkit"

#: security/l10n.pm:56
#, c-format
msgid "Do not send mails when unneeded"
msgstr "Не відсилати пошту, якщо не перевірена"

#: security/l10n.pm:57
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
"якщо встановлено, відсилає поштове повідомлення на цю поштову адресу, ще "
"відсилає його rootу"

#: security/l10n.pm:58
#, c-format
msgid "Report check result by mail"
msgstr "Відіслати звіт про результат перевірки поштою"

#: security/l10n.pm:59
#, c-format
msgid "Run some checks against the rpm database"
msgstr "Виконати деякі перевірки бази даних rpm"

#: security/l10n.pm:60
#, c-format
msgid "Report check result to syslog"
msgstr "Відсилати результати перевірки в системний журнал"

#: security/l10n.pm:61
#, c-format
msgid "Reports check result to tty"
msgstr "Повідомляти результати перевірки по tty"

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Ласкаво просимо до кракерів!"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Дуже низький"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Високий"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Підвищений"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Параноїдальний"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Цей рівень потрібно використовувати з обережністю. Він дозволяє більш\n"
"просте користування Вашою системою, але є надзвичайно ненадійним. Не\n"
"можна користуватися такою системою, коли вона під'єднана мережею до\n"
"інших систем, або до інтернету. Паролі не використовуються в цій\n"
"системі."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Паролі тепер увімкнені, але все одно не рекомендується користуватися цим "
"комп'ютером в мережі."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Це - стандартний рівень безпеки, який рекомендується мати на комп'ютері, "
"підключеному до інтернету в якості клієнта."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Вже є деякі обмеження і інші автоматичні перевірки запускаються кожної ночі."

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"На цьому рівні безпеки систему можна використовувати в якості сервера.\n"
"Рівень безпеки для цієї системи тепер достатній для того, щоб\n"
"використовувати її як сервер, що допускає під'єднання до нього\n"
"багатьох клієнтів. Зауваження: якщо Ваша машина є клієнтом тільки інтернету, "
"Ви можете вибрати нижчий рівень безпеки."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Подібний до попереднього рівня, але тепер система є повністю закритою і всі "
"режими безпеки на найвищому рівні."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "Основні параметри DrakSec"

#: security/level.pm:56
#, c-format
msgid "Please choose the desired security level"
msgstr "Будь-ласка, виберіть бажаний рівень захисту"

#: security/level.pm:60
#, c-format
msgid "Security level"
msgstr "Рівень безпеки"

#: security/level.pm:62
#, c-format
msgid "Use libsafe for servers"
msgstr "Використовувати libsafe для сервера"

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Бібліотека, яка захищає від атак переповнення буфера і форматування рядка."

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Адміністратор безпеки (логін або email)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Запуск звукової системи ALSA (Advanced Linux Sound Architecture)"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron служить для періодичного виконання команд."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd служить для контролю за рівнем батареї та запису повідомлень про\n"
"це у системний журнал syslog. Крім цього, він може вимикати комп'ютер,\n"
"коли батарея розрядилася."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Виконує команди, заплановані командою at під час виконання команди at\n"
"і виконує пакетні команди, коли системне навантаження достатньо\n"
"низьке. "

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron - це стандартна програма UNIX, яка виконує вибрані користувачем\n"
"програми періодично у вибраний час. vixie cron додає до стандартного\n"
"UNIX cron кілька нових можливостей, включаючи підвищену безпеку та\n"
"більш потужні конфігураційні параметри."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""
"FAM - це демон моніторингу за файлами. Він використовується для отримання "
"повідомлень при зміні файлу.\n"
"GNOME та KDE використовуєть його"

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM додає підтримку миші до текстових програм у Лінаксі, таких як,\n"
"наприклад, Midnight Commander. Додає також можливості \"cut-and-paste\"\n"
"до програм, що працюють на консолі, включаючи підтримку меню на\n"
"консолі."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake виконує тестування апаратного забезпечення і, якщо потрібно,\n"
"конфіґурує нове або змінене апаратне забезпечення."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache - це сервер для World Wide Web. Він використовується з файлами HTML "
"та CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Служба інтернет суперсервер (більше відома як inetd) служить для запуску\n"
"різноманітних сервісів Інтернету, коли це необхідно. Вона\n"
"відповідає за старт багатьох сервісів, таких як telnet, ftp, rsh,\n"
"та rlogin. При непрацюючій службі inetd не будуть також працювати\n"
"всі інші сервіси."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Запускає механізм фільтрування пакунків для ядра Лінакса\n"
"серії 2.2, щоб встановити захисний шлюз для захисту від атак\n"
"з мережі."

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Цей пакунок завантажує вибрану розкладку клавіатури, яка встановлюється\n"
"в /etc/sysconfig/keyboard. Ця клавіатура може бути вибрана за\n"
"допомогою програми kbdconfig. Краще залишити цей пакунок працюючим на\n"
"більшості систем."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Автоматичне створення файлів заголовків для ядра в теці /boot для\n"
"/usr/include/linux/{autoconf,version}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
"Автоматичне визначення та конфіґурування апаратного забезпечення при\n"
"завантаженні."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf буде деколи організовувати виконання різних задач\n"
"під час завантаження для підтримання конфігурації системи в\n"
"робочому стані."

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd - це служба друку, яка забезпечує роботу lpr. Фактично, вона є\n"
"сервером, який надсилає завдання на друкарку."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server використовується для побудови високонадійного\n"
"сервера з високою продуктивністю."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) - це сервер назв доменів (Domain Name Server, DNS), який\n"
"використовується для перетворення назв машин у IP-адреси."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Монтує та розмонтовує всі файлові системи типу Network File System\n"
"(NFS), SMB (Lan Manager/Windows) та NCP (NetWare)."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Вмикає/Вимикає всі інтерфейси мережі, налаштовані\n"
"стартувати при завантаженні системи."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS - це поширений протокол для спільного доступу до файлів\n"
"в мережах TCP/IP. Цей сервіс забезпечує функціональні можливості\n"
"сервера NFS, який налаштовується за допомогою файла /etc/exports. "

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS - це популярний протокол для спільного використання файлів на\n"
"комп'ютерах, з'єднаних мережею TCP/IP. Цей сервіс забезпечує\n"
"можливість блокування файлів NFS."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Автоматично увімкнути NumLock на консолі і в XFree \n"
"при завантаженні."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Підтримка для OKI 4w і сумісних win-друкарок."

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA підтримка потрібна в основному для забезпечення роботи таких\n"
"речей, як ethernet та модем в переносних комп'ютерах. Вони не почнуть\n"
"працювати, якщо його не сконфіґуровано, тому краще його встановлювати\n"
"на комп'ютерах, які цього не потребують."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper керує з'єднаннями з протоколом RPC, які використовуються\n"
"такими протоколами, як NFS та NIS. portmaper повинен працювати на\n"
"машинах, які є серверами для протоколів, що користуються RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix - це програма для передачі електронної пошти, яка передає поштові "
"повідомлення від одного комп'ютера до іншого."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Зберігає і відновлює джерело ентропії в системі, тим самим підвищуючи\n"
"якість ґенерації випадкових чисел."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Поставити пристрої необроблених даних у відповідність до\n"
"блокових пристроїв (як, наприклад, розділи твердого диску) для\n"
"використання в програмах типу Oracle а програвачі DVD."

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Служба routed дає можливість користуватися автоматичним поновленням\n"
"таблиці маршрутизації IP за допомогою протокола RIP. Протокол RIP\n"
"широко використовується на невеликих мережах, в той час, як на більш\n"
"складних необхідне застосування більш розвинених протоколів\n"
"маршрутизації."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Протокол rstat дає можливість користувачам в мережі отримувати дані\n"
"про завантання будь-якого комп'ютера в цій мережі."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Протокол rusers дає можливість отримувати інформацію про те,\n"
"хто зареєстрований на іншій машині, що відповідає на запити."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"Протокол rwho видає користувачам на віддалених системах інформацію про\n"
"всіх користувачів, зареєстрованих в системі, яка має службу rwho\n"
"(подібний до служби finger)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Запустити звукову систему на Вашій машині"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"syslog - це сервіс в системі, за допомогою якого багато служб записують\n"
"системні повідомлення у різні системні файли реєстрації повідомлень. В\n"
"будь-якій системі непогано мати syslog."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Завантажити драйвери для пристроїв usb."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
"Стартує сервер шрифтів для X (обов'язковий для роботи\n"
"сервера XFree)."

#: services.pm:117 services.pm:159
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr ""
"Виберіть, які сервіси мають стартувати автоматично при завантаженні системи"

#: services.pm:129
#, c-format
msgid "Printing"
msgstr "Друк"

#: services.pm:130
#, c-format
msgid "Internet"
msgstr "Інтернет"

#: services.pm:133
#, c-format
msgid "File sharing"
msgstr "Спільний доступ до файла"

#: services.pm:140
#, c-format
msgid "Remote Administration"
msgstr "Віддалене адміністрування"

#: services.pm:148
#, c-format
msgid "Database Server"
msgstr "Сервер баз даних"

#: services.pm:211
#, c-format
msgid "running"
msgstr "виконується"

#: services.pm:211
#, c-format
msgid "stopped"
msgstr "зупинено"

#: services.pm:215
#, c-format
msgid "Services and deamons"
msgstr "Сервіси та служби"

#: services.pm:221
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Вибачте, немає додаткової \n"
"інформації про цей сервіс."

#: services.pm:226 ugtk2.pm:1167
#, c-format
msgid "Info"
msgstr "Інформація"

#: services.pm:229
#, c-format
msgid "Start when requested"
msgstr "Запустити за запитом"

#: services.pm:229
#, c-format
msgid "On boot"
msgstr "При завантаженні"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Запустити"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Зупинити"

#: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13
#: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13
#, fuzzy, c-format
msgid "<b>Congratulations for choosing Mandrakelinux!</b>"
msgstr "Дякуємо за Ваш вибір Mandrakelinux 9.2"

#: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15
#: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15
#, fuzzy, c-format
msgid "Welcome to the Open Source world!"
msgstr "Ласкаво просимо в світ програм з відкритим кодом."

#: share/advertising/dis-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux operating system and its many applications is the "
"result of collaborative efforts between MandrakeSoft developers and "
"Mandrakelinux contributors throughout the world."
msgstr ""

#: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19
#: share/advertising/ppp-01.pl:19
#, c-format
msgid ""
"We would like to thank everyone who participated in the development of this "
"latest release."
msgstr ""

#: share/advertising/dis-02.pl:13
#, fuzzy, c-format
msgid "<b>Discovery</b>"
msgstr "Драйвер"

#: share/advertising/dis-02.pl:15
#, c-format
msgid ""
"Discovery is the easiest and most user-friendly Linux distribution. It "
"includes a hand-picked selection of premium software for Office, Multimedia "
"and Internet activities."
msgstr ""

#: share/advertising/dis-02.pl:17
#, fuzzy, c-format
msgid "The menu is task-oriented, with a single selected application per task."
msgstr ""
"Меню орієнтоване на задачі, з однією, вибраною, програмою для кожної задачі."

#: share/advertising/dis-03.pl:13
#, fuzzy, c-format
msgid "<b>The KDE Choice</b>"
msgstr "<b>Вибір KDE</b>"

#: share/advertising/dis-03.pl:15
#, fuzzy, c-format
msgid ""
"The powerful Open Source graphical desktop environment KDE is the desktop of "
"choice for the Discovery Pack."
msgstr ""
"Потужна відкрита графічна стільниця KDE - найкращий вибір для пакунку "
"Discovery."

#: share/advertising/dis-04.pl:13
#, c-format
msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
msgstr ""

#: share/advertising/dis-04.pl:15
#, c-format
msgid ""
"<b>WRITER</b> is a powerful word processor for creating all types of text "
"documents. Documents may include images, diagrams and tables."
msgstr ""

#: share/advertising/dis-04.pl:16
#, c-format
msgid ""
"<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
"analyze and manage all of your data."
msgstr ""

#: share/advertising/dis-04.pl:17
#, c-format
msgid ""
"<b>IMPRESS</b> is the fastest, most powerful way to create effective "
"multimedia presentations."
msgstr ""

#: share/advertising/dis-04.pl:18
#, c-format
msgid ""
"<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
"illustrations."
msgstr ""

#: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13
#, fuzzy, c-format
msgid "<b>Surf The Internet</b>"
msgstr "Інтернет"

#: share/advertising/dis-05.pl:15
#, c-format
msgid "Discover the new integrated personal information suite KDE Kontact."
msgstr ""

#: share/advertising/dis-05.pl:17
#, c-format
msgid ""
"More than just a full-featured email client, <b>Kontact</b> also includes an "
"address book, a calendar and scheduling program, plus a tool for taking "
"notes!"
msgstr ""

#: share/advertising/dis-06.pl:15
#, fuzzy, c-format
msgid "You can also:"
msgstr "Ви також можете:"

#: share/advertising/dis-06.pl:16
#, fuzzy, c-format
msgid "\t- browse the Web"
msgstr "\t- переглядайте Тенета"

#: share/advertising/dis-06.pl:17
#, fuzzy, c-format
msgid "\t- chat"
msgstr "\t- чат"

#: share/advertising/dis-06.pl:18
#, fuzzy, c-format
msgid "\t- organize a video-conference"
msgstr "\t- організовуйте відео конференції"

#: share/advertising/dis-06.pl:19
#, fuzzy, c-format
msgid "\t- create your own Web site"
msgstr "\t- створіть власний Веб-сайт"

#: share/advertising/dis-06.pl:20
#, fuzzy, c-format
msgid "\t- ..."
msgstr "\t- ..."

#: share/advertising/dis-07.pl:13
#, c-format
msgid "<b>Multimedia</b>: Software for every need!"
msgstr ""

#: share/advertising/dis-07.pl:15
#, fuzzy, c-format
msgid "Listen to audio CDs with <b>KsCD</b>."
msgstr "Слухайте аудіо диски з <b>KsCD</b>."

#: share/advertising/dis-07.pl:17
#, fuzzy, c-format
msgid "Listen to music files and watch videos with <b>Totem</b>."
msgstr "Слухайте музику і дивіться відео з <b>Totem</b>."

#: share/advertising/dis-07.pl:19
#, fuzzy, c-format
msgid "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
msgstr "Дивіться та редагуйте зображення з <b>GQview</b> та <b>The Gimp!</b>"

#: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13
#: share/advertising/pwp-07.pl:13
#, fuzzy, c-format
msgid "<b>Mandrake Control Center</b>"
msgstr "Центр керування Мандрейк"

#: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15
#: share/advertising/pwp-07.pl:15
#, c-format
msgid ""
"The Mandrake Control Center is an essential collection of Mandrake-specific "
"utilities for simplifying the configuration of your computer."
msgstr ""

#: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17
#: share/advertising/pwp-07.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of handy utilities for "
"easily configuring hardware devices, defining mount points, setting up "
"Network and Internet, adjusting the security level of your computer, and "
"just about everything related to the system."
msgstr ""

#: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13
#: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13
#, fuzzy, c-format
msgid "<b>MandrakeStore</b>"
msgstr "Центр керування Мандрейк"

#: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15
#: share/advertising/pwp-08.pl:15
#, fuzzy, c-format
msgid ""
"Find all MandrakeSoft products and services at <b>MandrakeStore</b> -- our "
"full service e-commerce platform."
msgstr ""
"Знайти всі продукти і сервіси MandrakeSoft на <b>MandrakeStore</b> - нашій "
"повноцінній платформі інтернет-комерції."

#: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19
#: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17
#, fuzzy, c-format
msgid "Stop by today at <b>www.mandrakestore.com</b>"
msgstr "Зупиніться сьогодні на <b>www.mandrakestore.com</b>"

#: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13
#: share/advertising/pwp-09.pl:13
#, fuzzy, c-format
msgid "Become a <b>MandrakeClub</b> member!"
msgstr "Станьте експертом Mandrake"

#: share/advertising/dis-10.pl:15 share/advertising/ppp-10.pl:15
#: share/advertising/pwp-09.pl:15
#, c-format
msgid ""
"Take advantage of valuable benefits, products and services by joining "
"MandrakeClub, such as:"
msgstr ""

#: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16
#: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16
#, fuzzy, c-format
msgid "\t- Full access to commercial applications"
msgstr "доступ до інструментів компіляції"

#: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17
#: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17
#, fuzzy, c-format
msgid "\t- Special download mirror list exclusively for MandrakeClub Members"
msgstr "\t- Спеціальний список дзеркал виключно для членів MandrakeClub."

#: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18
#: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18
#, fuzzy, c-format
msgid "\t- Voting for software to put in Mandrakelinux"
msgstr "Дякуємо за Ваш вибір Mandrakelinux 9.2"

#: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19
#: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19
#, fuzzy, c-format
msgid "\t- Special discounts for products and services at MandrakeStore"
msgstr "\t- Спеціальні знижки на продукти і сервіси в MandrakeStore"

#: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20
#: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19
#: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21
#: share/advertising/pwp-09.pl:20
#, fuzzy, c-format
msgid "\t- Plus much more"
msgstr "\t- І набагато більше"

#: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22
#: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22
#, fuzzy, c-format
msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
msgstr "Для подальшої інформації, відвідайте <b>www.mandrakeclub.com</b>"

#: share/advertising/dis-11.pl:13
#, fuzzy, c-format
msgid "Do you require assistance?"
msgstr "Чи Ви маєте які-небуть %s інтерфейси?"

#: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16
#: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15
#, fuzzy, c-format
msgid "<b>MandrakeExpert</b> is the primary source for technical support."
msgstr "<b>MandrakeExpert</b> - первинне джерело технічної підтримки."

#: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18
#: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17
#, fuzzy, c-format
msgid ""
"If you have Linux questions, subscribe to MandrakeExpert at <b>www."
"mandrakeexpert.com</b>"
msgstr ""
"Якщо у Вас є питання по Лінакс, зареєструйтеся в MandrakeExpert на <b>www."
"mandrakeexpert.com</b>"

#: share/advertising/dwd-01.pl:17
#, c-format
msgid ""
"Mandrakelinux is committed to the Open Source Model and fully respects the "
"General Public License. This new release is the result of collaboration "
"between MandrakeSoft's team of developers and the worldwide community of "
"Mandrakelinux contributors."
msgstr ""

#: share/advertising/dwd-02.pl:13
#, c-format
msgid "<b>Join the Mandrakelinux community!</b>"
msgstr ""

#: share/advertising/dwd-02.pl:15
#, c-format
msgid ""
"If you would like to get involved, please subscribe to the \"Cooker\" "
"mailing list by visiting <b>mandrake-linux.com/cooker</b>"
msgstr ""

#: share/advertising/dwd-02.pl:17
#, fuzzy, c-format
msgid ""
"To learn more about our dynamic community, please visit <b>www.mandrake-"
"linux.com</b>!"
msgstr ""
"За подальною інформацією про нашу динамічну спільноту, звертайтесь на <b>www."
"mandrake-linux.com</b>!"

#: share/advertising/dwd-03.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr ""

#: share/advertising/dwd-03.pl:15
#, c-format
msgid ""
"Mandrakelinux is an Open Source distribution created with thousands of the "
"choicest applications from the Free Software world. Mandrakelinux is one of "
"the most widely used Linux distributions worldwide!"
msgstr ""

#: share/advertising/dwd-03.pl:17
#, c-format
msgid ""
"Mandrakelinux includes the famous graphical desktops KDE and GNOME, plus the "
"latest versions of the most popular Open Source applications."
msgstr ""

#: share/advertising/dwd-04.pl:13
#, c-format
msgid ""
"Mandrakelinux is widely known as the most user-friendly and the easiest to "
"install and easy to use Linux distribution."
msgstr ""

#: share/advertising/dwd-04.pl:15
#, fuzzy, c-format
msgid "Find out about our <b>Personal Solutions</b>:"
msgstr "Дізнайтеся більше про наші<b>Персональні Пропозиції</b>:"

#: share/advertising/dwd-04.pl:16
#, c-format
msgid "\t- Find out Mandrakelinux on a bootable CD with <b>MandrakeMove</b>"
msgstr ""

#: share/advertising/dwd-04.pl:17
#, fuzzy, c-format
msgid ""
"\t- If you use Linux mostly for Office, Internet and Multimedia tasks, "
"<b>Discovery</b> perfectly meets your needs"
msgstr ""
"\t- Якщо ви використовуєте Лінакс переважно для Офісу, Інтернет та "
"Мультимедіа, <b>Discovery</b> повністю задовольнить Ваші потреби"

#: share/advertising/dwd-04.pl:18
#, fuzzy, c-format
msgid ""
"\t- If you appreciate the largest selection of software including powerful "
"development tools, <b>PowerPack</b> is for you"
msgstr ""
"\t- Якщо Ви потребуєте найбільший вибір програм, включаючи потужні "
"середовища розробки, <b>PowerPack</b> саме для Вас"

#: share/advertising/dwd-04.pl:19
#, fuzzy, c-format
msgid ""
"\t- If you require a full-featured Linux solution customized for small to "
"medium-sized networks, choose <b>PowerPack+</b>"
msgstr ""
"\t- Якщо Ви потребуєте повноцінне рішення на базі Лінакс, пристосоване для "
"малих та середніх мереж, вибирайте <b>PowerPack+</b>"

#: share/advertising/dwd-05.pl:13
#, fuzzy, c-format
msgid "Find out also our <b>Business Solutions</b>!"
msgstr "Спробуйте також наші <b>Пропозиції для бізнесу</b>!"

#: share/advertising/dwd-05.pl:15
#, fuzzy, c-format
msgid ""
"<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
"complete \"all-in-one\" solution that includes everything needed to rapidly "
"deploy world-class Linux server applications."
msgstr ""
"<b>Corporate Server</b>: ідеальне рішення для підприємств. Це повне \"все в "
"одному\" рішення, що включає все необхідне для швидкого розгортання "
"серверних програм Лінакс світового класу."

#: share/advertising/dwd-05.pl:17
#, fuzzy, c-format
msgid ""
"<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
"provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
"high performance security solution."
msgstr ""
"<b>Multi Network Firewall</b>: оснований на \"безпечному\" ядрі 2.4, "
"призначений для виконання багатьох VPN та DMZ функцій. Це гарне та "
"високопродуктивне рішення безпеки."

#: share/advertising/dwd-05.pl:19
#, c-format
msgid ""
"<b>MandrakeClustering</b>: the power and speed of a Linux cluster combined "
"with the stability and easy-of-use of the world-famous Mandrakelinux "
"distribution. A unique blend for incomparable HPC performance."
msgstr ""

#: share/advertising/dwd-06.pl:15
#, c-format
msgid ""
"Find all MandrakeSoft products at <b>MandrakeStore</b> -- our full service e-"
"commerce platform."
msgstr ""

#: share/advertising/dwd-06.pl:17
#, c-format
msgid ""
"Find out also support incidents if you have any problems, from standard to "
"professional support, from 1 to 50 incidents, take the one which meets "
"perfectly your needs!"
msgstr ""

#: share/advertising/dwd-07.pl:13
#, fuzzy, c-format
msgid "<b>Become a MandrakeClub member!</b>"
msgstr "Станьте експертом Mandrake"

#: share/advertising/dwd-07.pl:15
#, fuzzy, c-format
msgid ""
"Take advantage of valuable benefits, products and services by joining "
"Mandrake Club, such as:"
msgstr ""
"Отримайте цінні переваги, продукти і сервіси, ставши членом MandrakeClub, "
"такі як:"

#: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13
#: share/advertising/pwp-10.pl:13
#, fuzzy, c-format
msgid "<b>Do you require assistance?</b>"
msgstr "Чи Ви маєте які-небуть %s інтерфейси?"

#: share/advertising/dwd-09.pl:16
#, fuzzy, c-format
msgid "<b>Note</b>"
msgstr "<b>Примітки</b>"

#: share/advertising/dwd-09.pl:18
#, c-format
msgid "This is the Mandrakelinux <b>Download version</b>."
msgstr ""

#: share/advertising/dwd-09.pl:20
#, c-format
msgid ""
"The free download version does not include commercial software, and "
"therefore may not work with certain modems (such as some ADSL and RTC) and "
"video cards (such as ATI® and NVIDIA®)."
msgstr ""

#: share/advertising/ppp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution and its many applications are the result "
"of collaborative efforts between MandrakeSoft developers and Mandrakelinux "
"contributors throughout the world."
msgstr ""

#: share/advertising/ppp-02.pl:13
#, fuzzy, c-format
msgid "<b>PowerPack+</b>"
msgstr "<b>PowerPack+</b>"

#: share/advertising/ppp-02.pl:15
#, c-format
msgid ""
"PowerPack+ is a full-featured Linux solution for small to medium-sized "
"networks. PowerPack+ increases the value of the standard PowerPack by adding "
"a comprehensive selection of world-class server applications."
msgstr ""

#: share/advertising/ppp-02.pl:17
#, c-format
msgid ""
"It is the only Mandrakelinux product that includes the groupware solution."
msgstr ""

#: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13
#, fuzzy, c-format
msgid "<b>Choose your graphical Desktop environment!</b>"
msgstr "Виберіть ключ шифрування Вашої файлової системи"

#: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15
#, c-format
msgid ""
"When you log into your Mandrakelinux system for the first time, you can "
"choose between several popular graphical desktops environments, including: "
"KDE, GNOME, WindowMaker, IceWM, and others."
msgstr ""

#: share/advertising/ppp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all "
"tasks:"
msgstr ""

#: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15
#, fuzzy, c-format
msgid "\t- Create, edit and share office documents with <b>OpenOffice.org</b>"
msgstr ""
"\t- Створюйте, редагуйте та розділяете офісні документи з <b>OpenOffice.org</"
"b>"

#: share/advertising/ppp-04.pl:16
#, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites: <b>Kontact</b> and <b>Evolution</b>"
msgstr ""

#: share/advertising/ppp-04.pl:17
#, fuzzy, c-format
msgid "\t- Browse the Web with <b>Mozilla and Konqueror</b>"
msgstr "\t- Переглядайте Тенета з <b>Mozilla та Konqueror</b>"

#: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18
#, fuzzy, c-format
msgid "\t- Participate in online chat with <b>Kopete</b>"
msgstr "\t- Беріть участь в чатах з <b>Kopete</b>"

#: share/advertising/ppp-04.pl:19
#, c-format
msgid ""
"\t- Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
msgstr ""

#: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20
#, fuzzy, c-format
msgid "\t- Edit images and photos with <b>The Gimp</b>"
msgstr "\t- Редагуйте зображення та фотографії з <b>The Gimp</b>"

#: share/advertising/ppp-05.pl:13
#, c-format
msgid ""
"PowerPack+ includes everything needed for developing and creating your own "
"software, including:"
msgstr ""

#: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16
#, fuzzy, c-format
msgid ""
"\t- <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
"Environment for C++ programming"
msgstr ""
"\t- <b>Kdevelop</b> повнофункціональне та легке у використанні Інтегроване "
"Середовище Розробки для програмування на C++"

#: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17
#, fuzzy, c-format
msgid "\t- <b>GCC</b>: the GNU Compiler Collection"
msgstr "\t- <b>GCC</b>: колекція компіляторів GNU"

#: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18
#, fuzzy, c-format
msgid "\t- <b>GDB</b>: the GNU Project debugger"
msgstr "\t- <b>GDB</b> відлагоджувач проектів GNU"

#: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16
#, fuzzy, c-format
msgid "\t- <b>Emacs</b>: a customizable and real time display editor"
msgstr "\t- <b>Emacs</b>: настроюваний візуальний редактор реального часу."

#: share/advertising/ppp-05.pl:19
#, fuzzy, c-format
msgid ""
"\t- <b>Xemacs</b>: open source text editor and application development system"
msgstr ""
"\t- <b>Xemacs</b>: текстовий редактор та система розробки програм, з "
"відкритим текстом"

#: share/advertising/ppp-05.pl:20
#, fuzzy, c-format
msgid ""
"\t- <b>Vim</b>: advanced text editor with more features than standard Vi"
msgstr ""
"\t- <b>Vim</b>: розширений текстовий редактор з більшими можливостями, ніж "
"стандартний Vi"

#: share/advertising/ppp-06.pl:13
#, c-format
msgid "<b>Discover the full-featured groupware solution!</b>"
msgstr ""

#: share/advertising/ppp-06.pl:15
#, fuzzy, c-format
msgid "It includes both server and client features for:"
msgstr "Він включає і можливості і для сервера, і для клієнта:"

#: share/advertising/ppp-06.pl:16
#, fuzzy, c-format
msgid "\t- Sending and receiving emails"
msgstr "\t- Відсилання та отримання пошти"

#: share/advertising/ppp-06.pl:17
#, fuzzy, c-format
msgid ""
"\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
"receiving), Task Requests (sending and receiving)"
msgstr ""
"\t- Календар, Список завдань, Нагадування, Контакти, Запити для зустрічі "
"(надсилання та отримання), Запити про завдання (надсилання та отримання)"

#: share/advertising/ppp-06.pl:18
#, fuzzy, c-format
msgid "\t- Address Book (server and client)"
msgstr "\t- Адресна Книга (сервер та клієнт)"

#: share/advertising/ppp-07.pl:13
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/ppp-07.pl:15
#, c-format
msgid "\t- <b>Samba</b>: File and print services for MS-Windows clients"
msgstr ""

#: share/advertising/ppp-07.pl:16
#, fuzzy, c-format
msgid "\t- <b>Apache</b>: The most widely used Web server"
msgstr "Сервер World Wide Web Apache"

#: share/advertising/ppp-07.pl:17
#, c-format
msgid "\t- <b>MySQL</b>: The world's most popular Open Source database"
msgstr ""

#: share/advertising/ppp-07.pl:18
#, c-format
msgid ""
"\t- <b>CVS</b>: Concurrent Versions System, the dominant open-source network-"
"transparent version control system"
msgstr ""

#: share/advertising/ppp-07.pl:19
#, c-format
msgid ""
"\t- <b>ProFTPD</b>: the highly configurable GPL-licensed FTP server software"
msgstr ""

#: share/advertising/ppp-07.pl:20
#, fuzzy, c-format
msgid "\t- And others"
msgstr "і"

#: share/advertising/pwp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution is the result of collaborative efforts "
"between MandrakeSoft developers and Mandrakelinux contributors throughout "
"the world."
msgstr ""

#: share/advertising/pwp-01.pl:19
#, fuzzy, c-format
msgid ""
"We would like to thank everyone who participated in the development of our "
"latest release."
msgstr "Срд до дюймів   з."

#: share/advertising/pwp-02.pl:13
#, fuzzy, c-format
msgid "<b>PowerPack</b>"
msgstr "<b>PowerPack</b>"

#: share/advertising/pwp-02.pl:15
#, fuzzy, c-format
msgid ""
"PowerPack is MandrakeSoft's premier Linux desktop product. In addition to "
"being the easiest and the most user-friendly Linux distribution, PowerPack "
"includes thousands of applications - everything from the most popular to the "
"most technical."
msgstr ""
"співпадає з MandrakeSoft с Лінакс робочий стіл продукт Збільшити до   та   "
"корист. Лінакс дистрибутив з від   до  ."

#: share/advertising/pwp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all of "
"your tasks:"
msgstr ""

#: share/advertising/pwp-04.pl:16
#, fuzzy, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites <b>Kontact</b> and <b>Evolution</b>"
msgstr "і з Ваш дані на  <b></b> та<b> Evolution</b>"

#: share/advertising/pwp-04.pl:17
#, c-format
msgid "\t- Browse the Web with <b>Mozilla</b> and <b>Konqueror</b>"
msgstr ""

#: share/advertising/pwp-04.pl:19
#, fuzzy, c-format
msgid "\t- Listen to audio CDs and music files with KsCD and <b>Totem</b>"
msgstr "\t- Слухайте аудіо диски та музичні файли з KsCD та <b>Totem</b>"

#: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13
#, fuzzy, c-format
msgid "<b>Development tools</b>"
msgstr "Розробка"

#: share/advertising/pwp-05.pl:15
#, fuzzy, c-format
msgid ""
"PowerPack includes everything needed for developing and creating your own "
"software, including:"
msgstr ""
"PowerPack включає все необхідне для розробки і створення власного "
"програмного забезпечення, включаєчи:"

#: share/advertising/pwp-06.pl:15
#, fuzzy, c-format
msgid "And of course the editors!"
msgstr "І, звичайно, редактори!"

#: share/advertising/pwp-06.pl:17
#, c-format
msgid ""
"\t- <b>Xemacs</b>: another open source text editor and application "
"development system"
msgstr ""

#: share/advertising/pwp-06.pl:18
#, c-format
msgid ""
"\t- <b>Vim</b>: an advanced text editor with more features than standard Vi"
msgstr ""

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Ця програма є безкоштовною; Ви можете розповсюджувати її та/або\n"
"змінювати її згідно умов загальної публічної ліцензії GNU, опублікованої\n"
"фундацією безкоштовних програм; версії 2 або будь-якої пізнішої.\n"
"\n"
"Ця програма розповсюджується з надією, що може бути придатною, але\n"
"БЕЗ БУДЬ-ЯКОЇ ГАРАНТІЇ; навіть без припущення гарантії ПРАЦЕЗДАТНОСТІ\n"
"або ПРИДАТНОСТІ ДЛЯ КОНКРЕТНОЇ МЕТИ. Деталі дивіться в загальній\n"
"публічній ліцензії GNU.\n"
"\n"
"Ви повинні були отримати копію загальної публічної ліцензії GNU разом з "
"цією\n"
"програмою; якщо ні - напишіть у Free Software Foundation, Inc.,\n"
"59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.\n"

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Програма для резервування і відновлення\n"
"\n"
"--default             : записати типові теки.\n"
"--debug               : показати всі повідомлення при відлагодженні.\n"
"--show-conf           : показати список файлів або тек для резервування.\n"
"--config-info         : пояснити параметри конфігураційного файла (не для "
"користувачів Х.\n"
"--daemon              : використовувати службу конфігурації. \n"
"--help                : показати це повідомлення.\n"
"--version             : показати номер версії.\n"

#: standalone.pm:52
#, fuzzy, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""
"\n"
" увімкнути до\n"
" увімкнути до тема режим до"

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""
"[ПАРАМЕТРИ] [НАЗВА_ПРОГРАМИ]\n"
"\n"
"ПАРАМЕТРИ:\n"
"  --help            - вивести цю довідку.\n"
"  --report          - програма повинна бути з набору інструментів Мандрейк\n"
"  --incident        - програма повинна бути з набору інструментів Мандрейк"

#: standalone.pm:63
#, fuzzy, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""
"add\n"
" add add мережа\n"
" мережа\n"
"\n"
"\n"
" add"

#: standalone.pm:69
#, fuzzy, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"Програма імпорту і керування шрифтами                                     \n"
"--windows_import : імпорувати з усіх доступних розділів Віндовс.\n"
"--xls_fonts      : показати всі шрифти, які вже існують з xls\n"
"--strong         : строга перевірка шрифта.\n"
"--install        : включити будь-який файл шрифта і будь-яку теку.\n"
"--uninstall      : деінсталювати будь-який шрифт або теку шрифтів.\n"
"--replace        : замінити всі шрифти, які вже існують\n"
"--application    : 0 немає програми.\n"
"                 : 1 всі наявні програми, які підтримуються.\n"
"                 : назва_програми, так само для staroffice \n"
"                 : і gs для ghostscript для цього випадку."

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[ПАРАМЕТРИ]...\n"
"Конфігуратор Mandrake Terminal Server\n"
"--enable         : увімкнути MTS\n"
"--disable        : вимкнути MTS\n"
"--start          : запустити MTS\n"
"--stop           : зупинити MTS\n"
"--adduser        : додати існуючого системного користувача до MTS (потребує "
"назви користувача)\n"
"--deluser        : вилучити існуючого системного користувача з MTS (потребує "
"назви користувача)\n"
"--addclient      : додати клієнтську машину до MTS (потребує MAC-адресу, IP, "
"назву образу nbi)\n"
"--delclient      : вилучити клієнтську машину з MTS (потребує MAC-адресу, "
"IP, назву образу nbi)"

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[клавіатура]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
"[--file=мій_файл] [--word=моє_слово] [--explain=регулярний_вираз] [--alert]"

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[ПАРАМЕТРИ]\n"
"Програми для під'єднання і слідкування за мережею і інтернетом\n"
"\n"
"--defaultintf interface : показати цей інтерфейс як типовий\n"
"--connect : під'єднатися до інтернета, якщо ще не під'єднано\n"
"--disconnect : від'єднатися віж інтернета, якщо вже під'єднано\n"
"--force : використовується з (dis)connect : примусово при(від)єднатися.\n"
"--status : повертає 1, якщо під'єднано, інакше 0, потім виходить.\n"
"--quiet : не бути діалоговим. Використовується з при(від)єднатися."

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[ПАРАМЕТР]...\n"
"  --no-confirmation      не запитувати першого підртвердження в режимі "
"MandrakeUpdate\n"
"  --no-verify-rpm        не перевіряти підписи пакунків\n"
"  --changelog-first      показувати журнал змін перед списком файлів у вікні "
"опису\n"
"  --merge-all-rpmnew     пропонувати об'єднати всі знайдені файли .rpmnew/."
"rpmsave"

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] монітор\n"
"       роздільна здатність XFdrake"

#: standalone.pm:128
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Використання: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: standalone/XFdrake:87
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Будь-ласка, вийдіть із системи і потім натисніть Ctrl-Alt-BackSpace"

#: standalone/XFdrake:91
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr "Ви повинні перезареєструватися, щоб задіяти зміни"

#: standalone/drakTermServ:77
#, c-format
msgid "Useless without Terminal Server"
msgstr "Використання без термінального сервера"

#: standalone/drakTermServ:114 standalone/drakTermServ:121
#, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: %s вимагає ім'я користувача...\n"

#: standalone/drakTermServ:134
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""
"%s: %s потребує назву машини, MAC-адресу, IP, nbi-образ, 0/1 для "
"THIN_CLIENT, 0/1 для Local Config...\n"

#: standalone/drakTermServ:141
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: %s потребує назви машини...\n"

#: standalone/drakTermServ:153
#, c-format
msgid "You must be root to read configuration file. \n"
msgstr ""
"Ви повинні зареєструватися як root, щоб прочитати конфігураційний файл. \n"

#: standalone/drakTermServ:238 standalone/drakTermServ:511
#: standalone/drakfont:575
#, c-format
msgid "OK"
msgstr "Гаразд"

#: standalone/drakTermServ:249 standalone/drakTermServ:252
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "Налаштування сервера терміналу Mandrake"

#: standalone/drakTermServ:267
#, c-format
msgid "Enable Server"
msgstr "Увімкнути сервер"

#: standalone/drakTermServ:273
#, c-format
msgid "Disable Server"
msgstr "Вимкнути сервер"

#: standalone/drakTermServ:281
#, c-format
msgid "Start Server"
msgstr "Увімкнути сервера"

#: standalone/drakTermServ:287
#, c-format
msgid "Stop Server"
msgstr "Зупинити сервер"

#: standalone/drakTermServ:295
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Floppy/ISO для завантаження з мережі"

#: standalone/drakTermServ:299
#, c-format
msgid "Net Boot Images"
msgstr "Образи мережевих дисків завантаження"

#: standalone/drakTermServ:305
#, c-format
msgid "Add/Del Users"
msgstr "Додати/Вилучити користувачів"

#: standalone/drakTermServ:309
#, c-format
msgid "Add/Del Clients"
msgstr "Додати/Вилучити клієнтів"

#: standalone/drakTermServ:320 standalone/drakbug:54
#, c-format
msgid "First Time Wizard"
msgstr "Помічник першого запуску"

#: standalone/drakTermServ:351 standalone/drakTermServ:352
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:358
#, fuzzy, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup dhcp.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""
"\n"
"\n"
" Запитати ви до або н Налаштування DHCP н і   н і\n"
" всі\n"
" Задіяти   сервер\n"
" Запустити   сервер\n"
" д Синхронізувати   файли всі користувачі\n"
" до   file\n"
" e Запитати ви до\n"
" х Якщо с запитувати ви до н"

#: standalone/drakTermServ:403
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Запустити Помічника"

#: standalone/drakTermServ:415
#, fuzzy, c-format
msgid "Please save dhcpd config!"
msgstr "Будб ласка, збережіть настройки DHCP!"

#: standalone/drakTermServ:443
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "Дозволити тонких клієнтів"

#: standalone/drakTermServ:445
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:457 standalone/drakTermServ:1071
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:464
#, fuzzy, c-format
msgid "Creating net boot images for all kernels"
msgstr "Створення мережних завантажувальних образів для всіх ядер"

#: standalone/drakTermServ:465 standalone/drakTermServ:763
#: standalone/drakTermServ:779
#, c-format
msgid "This will take a few minutes."
msgstr "Це займе кілька хвилин"

#: standalone/drakTermServ:469 standalone/drakTermServ:489
#, fuzzy, c-format
msgid "Done!"
msgstr "Виконано"

#: standalone/drakTermServ:475
#, fuzzy, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""
"Синзронізація списку клієнтів сервера зі списком клієнта, включаючи root."

#: standalone/drakTermServ:495
#, fuzzy, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""
"Для дозволення змін, зроблених для тонких клієнтів, менеджер вікон має бути "
"перезапущено. Перезапустити зараз?"

#: standalone/drakTermServ:530
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Огляд drakTermServ"

#: standalone/drakTermServ:531
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""
"        - Створити образи Etherboot Enabled Boot:\n"
"        \tЩоб стартувати ядро з допомогою etherboot, потрібно створити "
"спеціальний образ ядра/initrd.\n"
"        \tmkinitrd-net виконує більшу частину цієї роботи і drakTermServ є "
"просто графічним інтерфейсом\n"
"        \tдля легшого збирання/налаштування цих образів. Щоб створити файл \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include, який включений як "
"вкладений в \n"
"        \tdhcpd.conf, Вам потрібно створити etherboot-образи для хоч би "
"одного повного ядра."

#: standalone/drakTermServ:537
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""
"        - Обслуговування /etc/dhcpd.conf:\n"
"        \t\tДля завантаження мережевих клієнтів кожен з них повинен мати "
"запис в dhcpd.conf, що задає IP-адресу\n"
"        \t\tі мережеві образи завантаження для машини. drakTermServ "
"допомогає створювати/знищувати такі записи.\n"
"\t\t\t\n"
"        \t\t(PCI карти можуть обійтися без образа - etherboot пошле запит на "
"правильний образ. Вам потрібно\n"
"        \t\tтакож знати, що коли etherboot шукає образи, то очікує знайти "
"назви типу\n"
"        \t\tboot-3c59x.nbi перш, ніж boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tТиповий запис в dhcpd.conf для підтримання бездискових клієнтів "
"виглядає так:"

#: standalone/drakTermServ:555
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""
"\t\t\tНе дивлячись на те, що Вам може більше подобатися використовувати "
"сукупність IP-адрес, ніж описувати окремі параметри для \n"
"\t\t\tклієнтської машини, використання схеми фіксованих адрес полегшує "
"використання функціональності\n"
"\t\t\tспецифічних для кожного клієнта конфігураційних файлів, які надає "
"ClusterNFS.\n"
"\t\t\t\n"
"\t\t\tЗауважте: Параметр \"#type\" використовується тільки drakTermServ. "
"Клієнти можуть бути або 'тонкими',\n"
"\t\t\tабо 'товстими'.  Тонкі клієнти запускають більшість програм на сервері "
"з допомогою xdmcp, а товсті клієнти запускають \n"
"\t\t\tбільшість програм на клієнтській машині. Для тонкого клієнта написаний "
"спеціальний inittab, %s.\n"
"\t\t\tЯкщо використовується тонкий клієнт, то системні конфігураційні файли "
"xdm-config, kdmr іgdm.conf \n"
"\t\t\tмодифікуються, щоб активізувати xdmcp. Оскільки існують питаннябезпеки "
"при використанні \n"
"\t\t\txdmcp, hosts.deny and hosts.allow повинні бути модифіковані, щоб "
"обмежити доступ до місцевої\n"
"\t\t\tпідмережі.\n"
"\t\t\t\n"
"\t\t\tПримітка: Параметр \"#hdw_config\" також використовується тільки "
"drakTermServ. Клієнти можуть бути або\n"
"\t\t\t'true', або 'false'. 'true' робить можливою реєстрацію root на машині "
"клієнта і дозволяє локальне \n"
"\t\t\tналаштування конфігурації звуку, миші та X, використовуючи інструменти "
"'drak'. Це забезпечується \n"
"\t\t\tшляхом створення окремих конфігураційних файлів, які відносяться до "
"клієнтських IP-адрес, а також \n"
"\t\t\tточок монтування для читання/запису, щоб дозволити клієнтам змінювати "
"файл. Після того, як Вас влаштує створена \n"
"\t\t\tконфігурація, Ви можете забрати у клієнта права реєстрації як root.\n"
"\t\t\t\n"
"\t\t\tПримітка: Ви повинні зупинити/запустити сервер після додавання або "
"зміни клієнтів."

#: standalone/drakTermServ:575
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""
"        - Формування /etc/exports:\n"
"        \t\tClusternfs дає змогу експортувати кореневу файлову систему до "
"бездискових клієнтів. drakTermServ\n"
"        \t\tвстановлює правильні параметри, щоб дозволити анонімний доступ "
"до кореневої файлової системи з \n"
"        \t\tбездискового клієнта.\n"
"\n"
"        \t\tТипові параметри експорту для clusternfs такі:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t\t/home              ПІДМЕРЕЖА/МАСКА(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tЗ ПІДМЕРЕЖЕЮ/МАСКОЮ, створеними для Вашої мережі."

#: standalone/drakTermServ:587
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""
"        - Формування %s:\n"
"        \t\tДля користувачів, які можуть реєструватися в системі з "
"бездискових клієнтів, параметри в\n"
"        \t\t/etc/shadow needs повинні бути повторені в %s. drakTermServ "
"допоможе\n"
"        \t\tстосовно цього додавати і вилучати системних користувачів з "
"цього файла."

#: standalone/drakTermServ:591
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""
"        - Для кожного клієнта %s:\n"
"        \t\tЗ clusternfs  кожний бездисковий клієнт може мати свої власні "
"унікальні файли конфігурації\n"
"        \t\tв кореневій файловій системі сервера. Дозволяючи локальному "
"клієнту налаштування конфігурації, \n"
"        \t\tdrakTermServ допоможе створити такі файли."

#: standalone/drakTermServ:596
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""
"        - Системні конфігураційні файли для кожного клієнта:\n"
"         \tЗ clusternfs кожний бездисковий клієнт може мати свої власні "
"унікальні файли конфігурації\n"
"        \tв кореневій файловій системі сервера. Дозволяючи локальному "
"клієнту налаштування конфігурації, \n"
"        клієнти можуть налаштовувати файли типу /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard кожен для себе.\n"
"\n"
"        Зауваження: Дозвіл налаштування обладнання для локального клієнта "
"робить можливим реєстрацію root на\n"
"        термінальний сервер на кожній з клієнтских машин, на якій цю "
"можливість увімкнено. Локальне налаштування\n"
"        може бути знову вимкнено із збереженням при цьому конфігураційних "
"файлів, як тільки клієнтська машина будет налаштована."

#: standalone/drakTermServ:605
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ налаштує цей файл для роботи в поєднанні з "
"образами, створеними\n"
"        \t\tmkinitrd-net і записами в /etc/dhcpd.conf для обслуговування "
"образа завантаження кожного\n"
"        \t\tбездискового клієнта.\n"
"\n"
"        \t\tТиповий вигляд конфігураційного файла tftp:\n"
"        \t\t\n"
"        \tservice tftp\n"
"        \t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \t\tТут відмінність від типового встановлення полягає в зміні "
"прапорця disable на\n"
"        \t\t'no' і зміні шляху теки на /var/lib/tftpboot, де mkinitrd-net\n"
"        \t\tрозміщує свої образи."

#: standalone/drakTermServ:626
#, fuzzy, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""
"        - Створює etherboot дискети/КД:\n"
"        \tМашинам - бездисковим клієнтам потрібні ROM образи на NIC,дискети "
"для завнтаження,\n"
"        \tабо КД для ініціалізації завантаження. drakTermServ допоможе "
"створити такі образи,\n"
"        \tосновані на NIC на клієнтській машині.\n"
"        \t\t\n"
"        \tБазовий приклад створення диска завантаження для 3Com 3c509 "
"вручную:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"

#: standalone/drakTermServ:661
#, c-format
msgid "Boot Floppy"
msgstr "Дискета для завантаження"

#: standalone/drakTermServ:663
#, c-format
msgid "Boot ISO"
msgstr "Boot ISO"

#: standalone/drakTermServ:665
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Образ"

#: standalone/drakTermServ:734
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "Надати версію ядра"

#: standalone/drakTermServ:761
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Зібрати ціле ядро -->"

#: standalone/drakTermServ:768
#, c-format
msgid "No kernel selected!"
msgstr "Не вибрано ядра!"

#: standalone/drakTermServ:771
#, c-format
msgid "Build Single NIC -->"
msgstr "Зібрати єдиний NIC -->"

#: standalone/drakTermServ:775
#, c-format
msgid "No NIC selected!"
msgstr "Не вибрано мережевої плати!"

#: standalone/drakTermServ:778
#, c-format
msgid "Build All Kernels -->"
msgstr "Зібрати всі ядра -->"

#: standalone/drakTermServ:786
#, c-format
msgid "<-- Delete"
msgstr "<-- Видалити"

#: standalone/drakTermServ:793
#, c-format
msgid "Delete All NBIs"
msgstr "Видалити всі NBI"

#: standalone/drakTermServ:880
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Виявляє, що пароль в системній базі даних відрізняється\n"
"від пароля в базі даних Terminal Server.\n"
"Витерти/Додати ще раз користувача в Terminal Server, щоб зробити\n"
"можливою реєстрацію."

#: standalone/drakTermServ:885
#, c-format
msgid "Add User -->"
msgstr "Додати користувача -->"

#: standalone/drakTermServ:891
#, c-format
msgid "<-- Del User"
msgstr "<-- Видалити користувача"

#: standalone/drakTermServ:927
#, c-format
msgid "type: %s"
msgstr "тип: %s"

#: standalone/drakTermServ:931
#, c-format
msgid "local config: %s"
msgstr "локальна конфігурація: %s"

#: standalone/drakTermServ:961
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr ""
"Дозволити налаштування\n"
"локальних пристроїв."

#: standalone/drakTermServ:970
#, c-format
msgid "No net boot images created!"
msgstr "Не створено образів мережевих завантажувачів!"

#: standalone/drakTermServ:988
#, c-format
msgid "Thin Client"
msgstr "Тонкий клієнт"

#: standalone/drakTermServ:992
#, c-format
msgid "Allow Thin Clients"
msgstr "Дозволити тонких клієнтів"

#: standalone/drakTermServ:993
#, c-format
msgid "Add Client -->"
msgstr "Додати клієнта -->"

#: standalone/drakTermServ:1007
#, c-format
msgid "type: fat"
msgstr "тип: fat"

#: standalone/drakTermServ:1008
#, c-format
msgid "type: thin"
msgstr "Тип: тонкий"

#: standalone/drakTermServ:1015
#, c-format
msgid "local config: false"
msgstr "local config: false"

#: standalone/drakTermServ:1016
#, c-format
msgid "local config: true"
msgstr "локальна конфігурація: true"

#: standalone/drakTermServ:1024
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Редактувати клієнта"

#: standalone/drakTermServ:1050
#, c-format
msgid "Disable Local Config"
msgstr "Вимкнути локальну конфігурацію"

#: standalone/drakTermServ:1057
#, c-format
msgid "Delete Client"
msgstr "Видалити клієнта"

#: standalone/drakTermServ:1066
#, c-format
msgid "dhcpd Config..."
msgstr "Налаштовується dhcpd..."

#: standalone/drakTermServ:1082
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Потрібно перезапустити менеджер дисплею для задіяння всіх змін. \n"
"(service dm restart - в консолі)."

#: standalone/drakTermServ:1122
#, c-format
msgid "Thin clients won't work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1138
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1168
#, c-format
msgid "Subnet:"
msgstr "Підмережа:"

#: standalone/drakTermServ:1175
#, c-format
msgid "Netmask:"
msgstr "Маска мережі:"

#: standalone/drakTermServ:1182
#, c-format
msgid "Routers:"
msgstr "Маршрутизатори:"

#: standalone/drakTermServ:1189
#, c-format
msgid "Subnet Mask:"
msgstr "Маска підмережі:"

#: standalone/drakTermServ:1196
#, c-format
msgid "Broadcast Address:"
msgstr "Оповіщувальна адреса:"

#: standalone/drakTermServ:1203
#, c-format
msgid "Domain Name:"
msgstr "Назва домена:"

#: standalone/drakTermServ:1211
#, c-format
msgid "Name Servers:"
msgstr "Сервери назв:"

#: standalone/drakTermServ:1222
#, c-format
msgid "IP Range Start:"
msgstr "Початок інтервалу IP:"

#: standalone/drakTermServ:1223
#, c-format
msgid "IP Range End:"
msgstr "Кінець діапазона IP:"

#: standalone/drakTermServ:1275
#, c-format
msgid "dhcpd Server Configuration"
msgstr "Налаштування сервера dhcp"

#: standalone/drakTermServ:1276
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Більшість із цих величин отримана\n"
"від Вашої працюючої системи.\n"
"Якщо потрібно, можете виправити."

#: standalone/drakTermServ:1279
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "Накопичувач динамічних IP-адрес:"

#: standalone/drakTermServ:1292
#, c-format
msgid "Write Config"
msgstr "Записати налаштування"

#: standalone/drakTermServ:1411
#, c-format
msgid "Please insert floppy disk:"
msgstr "Будь ласка, вставте дискету:"

#: standalone/drakTermServ:1415
#, c-format
msgid "Couldn't access the floppy!"
msgstr "Не можу отримати доступу до дисковода!"

#: standalone/drakTermServ:1417
#, c-format
msgid "Floppy can be removed now"
msgstr "Тепер дискета може бути вилучена"

#: standalone/drakTermServ:1420
#, c-format
msgid "No floppy drive available!"
msgstr "Немає доступних дисководів!"

#: standalone/drakTermServ:1425
#, fuzzy, c-format
msgid "PXE image is %s/%s"
msgstr "ISO-образом завантаження з мережі є %s"

#: standalone/drakTermServ:1427
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "Помилка при записі у файл %s"

#: standalone/drakTermServ:1436
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "ISO-образом завантаження з мережі є %s"

#: standalone/drakTermServ:1438
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Щось пішло з помилками! - Чи встановлено mkisofs?"

#: standalone/drakTermServ:1458
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Потрібно спочатку створити /etc/dhcpd.conf!"

#: standalone/drakTermServ:1619
#, fuzzy, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr "В Сервері Терміналів %s passwd є поганим - перезаписую...\n"

#: standalone/drakTermServ:1637
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "%s не знайдено...\n"

#: standalone/drakTermServ:1638
#, fuzzy, c-format
msgid "%s is already a Terminal Server user\n"
msgstr "%s вже використовується\n"

#: standalone/drakTermServ:1640
#, fuzzy, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr "Збій при додаванні %s до Серверу Терміналів!\n"

#: standalone/drakTermServ:1642
#, fuzzy, c-format
msgid "%s added to Terminal Server\n"
msgstr "Використання без термінального сервера"

#: standalone/drakTermServ:1694
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "Знайдено %s"

#: standalone/drakTermServ:1696 standalone/drakTermServ:1773
#, c-format
msgid "%s not found...\n"
msgstr "%s не знайдено...\n"

#: standalone/drakTermServ:1718 standalone/drakTermServ:1719
#: standalone/drakTermServ:1720
#, c-format
msgid "%s already in use\n"
msgstr "%s вже використовується\n"

#: standalone/drakTermServ:1744
#, c-format
msgid "Can't open %s!"
msgstr "Не можу відкрити %s!"

#: standalone/drakTermServ:1801
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow і /etc/hosts.deny вже налаштовані - не змінено"

#: standalone/drakTermServ:1958
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "Конфігурацію змінено - перезапустити clusternfs/dhcpd?"

#: standalone/drakautoinst:38
#, c-format
msgid "Error!"
msgstr "Помилка!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Не можу знайти потрібного файлу із зображенням `%s'"

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "Конфіґуратор автоматичного встановлення"

#: standalone/drakautoinst:42
#, fuzzy, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""
"Зараз Ви будете налаштовувати дискету для автоматичного встановлення. Цей\n"
"режим встановлення дещо небезпечний і ним треба користуватися\n"
"помірковано.\n"
"\n"
"Користуючись цим режимом, Ви можете повторити встановлення, яке Ви\n"
"щойно виконали на даній системі. На деяких етапах Вам будуть\n"
"задані запитання, щоб змінити значення кількох змінних.\n"
"\n"
"Для найбільшої безпеки поділ диску на розділи і форматування ніколи не\n"
"буде виконуватись автоматично незалежно від того, що вибрано при\n"
"встановленні.\n"
"\n"
"Хочете продовжувати? "

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "повторити"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "вручну"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Конфіґурація кроків установки"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Вкажіть, будь ласка, для кожного кроку, чи він буде повторений, як при "
"встановленні, чи виконається вручну"

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "Створення дискети для автоматичного встановлення"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Вставте чисту дискету в дисковод %s"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Створення дискети для автоматичного встановлення"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Ласкаво просимо.\n"
"\n"
"Параметри автоматичного встановлення доступні в розділах зліва"

#: standalone/drakautoinst:252 standalone/drakgw:594 standalone/drakvpn:900
#: standalone/scannerdrake:374
#, c-format
msgid "Congratulations!"
msgstr "Вітання!"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Дискета створена успішно.\n"
"Тепер Ви зможете повторити встановлення."

#: standalone/drakautoinst:289
#, c-format
msgid "Auto Install"
msgstr "Автовстановлення"

#: standalone/drakautoinst:358
#, c-format
msgid "Add an item"
msgstr "Додати пункт"

#: standalone/drakautoinst:365
#, c-format
msgid "Remove the last item"
msgstr "Видалити останній пункт"

#: standalone/drakbackup:88
#, c-format
msgid "hd"
msgstr "hd"

#: standalone/drakbackup:88
#, c-format
msgid "tape"
msgstr "плівка"

#: standalone/drakbackup:112
#, c-format
msgid "No devices found"
msgstr "Пристроїв не знайдено"

#: standalone/drakbackup:154
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""
"Expect є розширенням скриптової мови Tcl, яка дозволяє діалогові сеанси без "
"участі користувача."

#: standalone/drakbackup:155
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "Зберігати пароль для цієї системи в конфігурації drakbackup."

#: standalone/drakbackup:156
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""
"У випадку багатосесійного CD тільки перший сеанс його зітре. В іншому "
"випадку CDRW буде стиратися перед кожним резервуванням."

#: standalone/drakbackup:157
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""
"Цей параметр зберігатиме змінені файли. Точна поведінка залежить від того, "
"який режим вибрано - наростаючий чи різницевий."

#: standalone/drakbackup:158
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""
"Наростаючі резервування зберігають тільки файли, які змінилися, або є новими "
"з часу створення попереднього резервування."

#: standalone/drakbackup:159
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""
"Різницеві резервування зберігають тільки файли, які були змінені, або є "
"новими після базового резервування."

#: standalone/drakbackup:160
#, fuzzy, c-format
msgid ""
"This should be a local user or email addresse that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""
"Це повинен бути список розділених комою локальних користувачів або "
"електронні адреси, яким Ви хочете надсилати результати резервування. Вам "
"потрібно буде мати працюючий поштовик, встановлений на Вашій системі."

#: standalone/drakbackup:161
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""
"Файли або шаблони, перелічені у файлі .backupignore у верхній частині дерева "
"тек, не будуть резервовані."

#: standalone/drakbackup:162
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""
"При резрвуванні на інші носії файли всеодно створюються на твердому диску, "
"тоді переміщуються на інший носій. При виборі цього параметра tar-файл після "
"резервування буде видалятися з твердого диску."

#: standalone/drakbackup:163
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""
"Деякі протоколи, як rsync, можуть бути сконфігуровані в кінці сервера. "
"Краще, ніж вказування шляху, Ви можете використовувати назву 'модуля' для "
"шляху до служби."

#: standalone/drakbackup:164
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""
"Вибірково дає змогу Вам вказати свої дату і час.  Інші параметри "
"використовують run-parts в /etc/crontab."

#: standalone/drakbackup:396
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:400
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:447
#, fuzzy, c-format
msgid "Interval cron not available as non-root"
msgstr "Cron не доступний для не-root"

#: standalone/drakbackup:532 standalone/logdrake:467
#, fuzzy, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""
"\"%s\" не є ні вірною електронною адресою, ні існуючим локальним "
"користувачем!"

#: standalone/drakbackup:536 standalone/logdrake:472
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:545
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""
"Дійсний користувацький список змінено, перезаписується конфігураційний файл."

#: standalone/drakbackup:547
#, c-format
msgid "Old user list:\n"
msgstr "Старий список користувачів:\n"

#: standalone/drakbackup:549
#, c-format
msgid "New user list:\n"
msgstr "Новий список користувачів:\n"

#: standalone/drakbackup:594
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      Звіт DrakBackup \n"

#: standalone/drakbackup:595
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      Служба звітів DrakBackup\n"

#: standalone/drakbackup:601
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    Детальний звіт DrakBackup\n"
"\n"
"\n"

#: standalone/drakbackup:625 standalone/drakbackup:696
#: standalone/drakbackup:752
#, c-format
msgid "Total progress"
msgstr "Загальний поступ"

#: standalone/drakbackup:678
#, fuzzy, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s існує, видалити?\n"
"\n"
"Попередження: якщо Ви вже виконали цей процес, Вам,\n"
"можливо, потрібно буде видалити запис з authorized_keys\n"
"на сервері."

#: standalone/drakbackup:687
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Генерація ключів займе певний час."

#: standalone/drakbackup:694
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "ПОМИЛКА: Неможливо створити підпроцес %s."

#: standalone/drakbackup:711
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Немає підказки пароля на %s, порт %s"

#: standalone/drakbackup:712
#, c-format
msgid "Bad password on %s"
msgstr "Поганий пароль на %s"

#: standalone/drakbackup:713
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Заборонений доступ для переміщення %s в %s"

#: standalone/drakbackup:714
#, c-format
msgid "Can't find %s on %s"
msgstr "Не можу знайти %s на %s"

#: standalone/drakbackup:718
#, c-format
msgid "%s not responding"
msgstr "%s не відповідає"

#: standalone/drakbackup:722
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Передавання завершене\n"
"Якщо Ви хочете перевірити, зареєструйтеся на сервері, використовуючи:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"без запиту пароля."

#: standalone/drakbackup:766
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "Віддалений сайт WebDAV вже синхронізується!"

#: standalone/drakbackup:770
#, c-format
msgid "WebDAV transfer failed!"
msgstr "Переміщення WebDAV завершилося невдало!"

#: standalone/drakbackup:791
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "В приводі немає CDR/DVDR!"

#: standalone/drakbackup:795
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Здається, цей носій не є записуваним!"

#: standalone/drakbackup:799
#, c-format
msgid "Not erasable media!"
msgstr "Інформація на цьому носії не стирається!"

#: standalone/drakbackup:840
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Стирання носія займе певний час."

#: standalone/drakbackup:898
#, c-format
msgid "Permission problem accessing CD."
msgstr "Проблема з правами доступу до КД."

#: standalone/drakbackup:925
#, c-format
msgid "No tape in %s!"
msgstr "Немає плівки в %s!"

#: standalone/drakbackup:1025
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""
"Перевищено обмеження резервування!\n"
"використано %d Mb з виділених %d Mb."

#: standalone/drakbackup:1044 standalone/drakbackup:1077
#, c-format
msgid "Backup system files..."
msgstr "Резервування системних файлів..."

#: standalone/drakbackup:1078 standalone/drakbackup:1119
#, c-format
msgid "Hard Disk Backup files..."
msgstr "Резервуються файли твердого диску..."

#: standalone/drakbackup:1118
#, c-format
msgid "Backup User files..."
msgstr "Резервуються файли користувача..."

#: standalone/drakbackup:1153
#, c-format
msgid "Backup Other files..."
msgstr "Резервувати інші файли..."

#: standalone/drakbackup:1154
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Перебіг резервування твердого диску..."

#: standalone/drakbackup:1159
#, c-format
msgid "No changes to backup!"
msgstr "Немає змін для резервування!"

#: standalone/drakbackup:1177 standalone/drakbackup:1201
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Активність Drakbackup через %s:\n"
"\n"

#: standalone/drakbackup:1186
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Проблема з'єднання по FTP: неможливо відіслати Ваші зарезервовані файли по "
"FTP.\n"

#: standalone/drakbackup:1187
#, fuzzy, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""
"Помилка під час відсилання файла по FTP.\n"
" Будь-ласка, виправте налаштування FTP.."

#: standalone/drakbackup:1189
#, fuzzy, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""
"список файлів, посланий по FTP: %s\n"
" "

#: standalone/drakbackup:1206
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup виконується на КД:\n"
"\n"

#: standalone/drakbackup:1211
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Робота Drakbackup на плівку:\n"
"\n"

#: standalone/drakbackup:1220
#, fuzzy, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""
"Помилка при відсиланні пошти.\n"
"  Вашого листа з повідомленням не було відправлено.\n"
"  Будь-ласка, налаштуйте відсилання пошти"

#: standalone/drakbackup:1221
#, c-format
msgid " Error while sending mail. \n"
msgstr " Помилка при відсиланні пошти. \n"

#: standalone/drakbackup:1249
#, c-format
msgid "Can't create catalog!"
msgstr "Неможливо створити каталог!"

#: standalone/drakbackup:1455
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Виберіть файли або теки і натисніть 'Гаразд'"

#: standalone/drakbackup:1484
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Будь-ласка, перевірте всі параметри, які Вам потрібні.\n"

#: standalone/drakbackup:1485
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Ці параметри можуть створювати резервну копію і відновлювати всі файли в "
"теці /etc.\n"

#: standalone/drakbackup:1486
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Резервувати системні файли (тека /etc)"

#: standalone/drakbackup:1487 standalone/drakbackup:1551
#: standalone/drakbackup:1617
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""
"Використовувати Наростаючі/Різницеві резервування (не замінювати попередні "
"копії)"

#: standalone/drakbackup:1489 standalone/drakbackup:1553
#: standalone/drakbackup:1619
#, c-format
msgid "Use Incremental Backups"
msgstr "Використовувати наростаючі резервування"

#: standalone/drakbackup:1489 standalone/drakbackup:1553
#: standalone/drakbackup:1619
#, c-format
msgid "Use Differential Backups"
msgstr "Використовувати різницеві резервування"

#: standalone/drakbackup:1491
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Не включати важливі файли (passwd, group, fstab)"

#: standalone/drakbackup:1492
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"З цим параметром Ви зможете відновити будь-яку версію\n"
"Вашої теки /etc."

#: standalone/drakbackup:1523
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""
"Будь-ласка, перевірте усіх користувачів, яких Ви хочете включити в резервну "
"копію."

#: standalone/drakbackup:1550
#, c-format
msgid "Do not include the browser cache"
msgstr "Не включати кеш переглядача"

#: standalone/drakbackup:1605 standalone/drakfont:656
#, c-format
msgid "Remove Selected"
msgstr "Вилучити вибрані"

#: standalone/drakbackup:1668
#, c-format
msgid "Users"
msgstr "Користувачі"

#: standalone/drakbackup:1688
#, c-format
msgid "Use network connection to backup"
msgstr "Використовувати з'єднання з мережею для резервування"

#: standalone/drakbackup:1690
#, c-format
msgid "Net Method:"
msgstr "Метод мережі:"

#: standalone/drakbackup:1694
#, c-format
msgid "Use Expect for SSH"
msgstr "Використовувати Expect для SSH"

#: standalone/drakbackup:1695
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr "Створити/Перенести резервні копії ключів для SSH"

#: standalone/drakbackup:1697
#, c-format
msgid "Transfer Now"
msgstr "Перенести вже"

#: standalone/drakbackup:1699
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr "Інші (не drakbackup) ключі вже на місці"

#: standalone/drakbackup:1702
#, c-format
msgid "Host name or IP."
msgstr "Назва машини або IP."

#: standalone/drakbackup:1707
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr "Тека (або модуль) для розміщення резервної копії на цю машину."

#: standalone/drakbackup:1712
#, c-format
msgid "Login name"
msgstr "Ім'я користувача, що реєструється"

#: standalone/drakbackup:1719
#, c-format
msgid "Remember this password"
msgstr "Запам'ятати цей пароль"

#: standalone/drakbackup:1735
#, c-format
msgid "Need hostname, username and password!"
msgstr "Потрібні назва машини, користувача і пароль!"

#: standalone/drakbackup:1833
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Використовувати CD/DVDROM для резервування"

#: standalone/drakbackup:1836
#, c-format
msgid "Choose your CD/DVD device"
msgstr "Будь-ласка, виберіть пристрій CD/DVD"

#: standalone/drakbackup:1841
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "Виберіть розмір Вашого носія CD/DVD (Мб)"

#: standalone/drakbackup:1848
#, c-format
msgid "Multisession CD"
msgstr "Багатосесійний КД"

#: standalone/drakbackup:1850
#, c-format
msgid "CDRW media"
msgstr "носій CDRW"

#: standalone/drakbackup:1856
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Стерти носія RW (1-ий сеанс)"

#: standalone/drakbackup:1857
#, c-format
msgid " Erase Now "
msgstr " Витерти зараз "

#: standalone/drakbackup:1863
#, fuzzy, c-format
msgid "DVD+RW media"
msgstr "носій CDRW"

#: standalone/drakbackup:1865
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "носій CDRW"

#: standalone/drakbackup:1867
#, c-format
msgid "DVDRAM device"
msgstr "пристрій DVDRAM"

#: standalone/drakbackup:1898
#, c-format
msgid "No CD device defined!"
msgstr "Не задано жодного КД-пристрою!"

#: standalone/drakbackup:1945
#, c-format
msgid "Use tape to backup"
msgstr "Використовувати плівку для резервування"

#: standalone/drakbackup:1948
#, c-format
msgid "Device name to use for backup"
msgstr "Назва пристрою для створення резервної копії"

#: standalone/drakbackup:1954
#, c-format
msgid "Don't rewind tape after backup"
msgstr "Не перемотувати плівку після резервування"

#: standalone/drakbackup:1960
#, c-format
msgid "Erase tape before backup"
msgstr "Стерти плівку перед резервуванням"

#: standalone/drakbackup:1966
#, c-format
msgid "Eject tape after the backup"
msgstr "Вийняти плівку після резервування"

#: standalone/drakbackup:2033
#, c-format
msgid "Enter the directory to save to:"
msgstr "Виберіть теку для збереження:"

#: standalone/drakbackup:2037
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "Виберіть теку для збереження:"

#: standalone/drakbackup:2042
#, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Найбільший розмір,\n"
" дозволений для Drakbackup (Мб)"

#: standalone/drakbackup:2106
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2111
#, c-format
msgid "HardDrive / NFS"
msgstr "Твердий диск / NFS"

#: standalone/drakbackup:2127 standalone/drakbackup:2132
#: standalone/drakbackup:2137
#, c-format
msgid "hourly"
msgstr "щогодини"

#: standalone/drakbackup:2128 standalone/drakbackup:2133
#: standalone/drakbackup:2137
#, c-format
msgid "daily"
msgstr "щоденно"

#: standalone/drakbackup:2129 standalone/drakbackup:2134
#: standalone/drakbackup:2137
#, c-format
msgid "weekly"
msgstr "щотижня"

#: standalone/drakbackup:2130 standalone/drakbackup:2135
#: standalone/drakbackup:2137
#, c-format
msgid "monthly"
msgstr "щомісяця"

#: standalone/drakbackup:2131 standalone/drakbackup:2136
#: standalone/drakbackup:2137
#, c-format
msgid "custom"
msgstr "спеціальний"

#: standalone/drakbackup:2142
#, c-format
msgid "January"
msgstr "Січень"

#: standalone/drakbackup:2142
#, c-format
msgid "February"
msgstr "Лютий"

#: standalone/drakbackup:2142
#, c-format
msgid "March"
msgstr "Березень"

#: standalone/drakbackup:2143
#, c-format
msgid "April"
msgstr "Квітень"

#: standalone/drakbackup:2143
#, c-format
msgid "May"
msgstr "Травень"

#: standalone/drakbackup:2143
#, c-format
msgid "June"
msgstr "Червень"

#: standalone/drakbackup:2143
#, c-format
msgid "July"
msgstr "Липень"

#: standalone/drakbackup:2143
#, c-format
msgid "August"
msgstr "Серпень"

#: standalone/drakbackup:2143
#, c-format
msgid "September"
msgstr "Вересень"

#: standalone/drakbackup:2144
#, c-format
msgid "October"
msgstr "Жовтень"

#: standalone/drakbackup:2144
#, c-format
msgid "November"
msgstr "Листопад"

#: standalone/drakbackup:2144
#, c-format
msgid "December"
msgstr "Грудень"

#: standalone/drakbackup:2149
#, c-format
msgid "Sunday"
msgstr "Неділя"

#: standalone/drakbackup:2149
#, c-format
msgid "Monday"
msgstr "Понеділок"

#: standalone/drakbackup:2149
#, c-format
msgid "Tuesday"
msgstr "Вівторок"

#: standalone/drakbackup:2150
#, c-format
msgid "Wednesday"
msgstr "Середа"

#: standalone/drakbackup:2150
#, c-format
msgid "Thursday"
msgstr "Четвер"

#: standalone/drakbackup:2150
#, c-format
msgid "Friday"
msgstr "П'ятниця"

#: standalone/drakbackup:2150
#, c-format
msgid "Saturday"
msgstr "Субота"

#: standalone/drakbackup:2185
#, c-format
msgid "Use daemon"
msgstr "Використовувати службу"

#: standalone/drakbackup:2190
#, c-format
msgid "Please choose the time interval between each backup"
msgstr "Будь-ласка, вкажіть інтервал часу між кожним резервуванням"

#: standalone/drakbackup:2196
#, c-format
msgid "Custom setup/crontab entry:"
msgstr "Вибірковий запис setup/crontab:"

#: standalone/drakbackup:2201
#, c-format
msgid "Minute"
msgstr "Хвилина"

#: standalone/drakbackup:2205
#, c-format
msgid "Hour"
msgstr "Година"

#: standalone/drakbackup:2209
#, c-format
msgid "Day"
msgstr "День"

#: standalone/drakbackup:2213
#, c-format
msgid "Month"
msgstr "Місяць"

#: standalone/drakbackup:2217
#, c-format
msgid "Weekday"
msgstr "Будні"

#: standalone/drakbackup:2223
#, c-format
msgid "Please choose the media for backup."
msgstr "Виберіть, будь ласка, носія для резервування."

#: standalone/drakbackup:2230
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "Будь-ласка, переконайтеся, що служба cron включена до Ваших сервісів."

#: standalone/drakbackup:2231
#, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""
"Зауважте, що зараз усі 'мережеві' носії також використовують твердий диск."

#: standalone/drakbackup:2281
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "будь-ласка, вкажіть дату для відновлення"

#: standalone/drakbackup:2285
#, c-format
msgid "Use .backupignore files"
msgstr "Використовувати файли .backupignore"

#: standalone/drakbackup:2287
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Відсилати після кожного резервування поштове повідомлення на:"

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "Назва машини SMB-сервера"

#: standalone/drakbackup:2298
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "Стерти файли tar твердого диску після резервування на іншого носія."

#: standalone/drakbackup:2338
#, c-format
msgid "What"
msgstr "Що"

#: standalone/drakbackup:2343
#, c-format
msgid "Where"
msgstr "Де"

#: standalone/drakbackup:2348
#, c-format
msgid "When"
msgstr "Коли"

#: standalone/drakbackup:2353
#, c-format
msgid "More Options"
msgstr "Додаткові параметри"

#: standalone/drakbackup:2366
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "Мережа не налаштована для роботи"

#: standalone/drakbackup:2385 standalone/drakbackup:4413
#, c-format
msgid "Drakbackup Configuration"
msgstr "Конфігурація Drakbackup"

#: standalone/drakbackup:2402
#, c-format
msgid "Please choose where you want to backup"
msgstr "Будь-ласка, вкажіть, куди Ви хочете резервувати"

#: standalone/drakbackup:2404
#, fuzzy, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr "Стерти файли tar твердого диску після резервування на іншого носія."

#: standalone/drakbackup:2412
#, c-format
msgid "Across Network"
msgstr "в мережі"

#: standalone/drakbackup:2420
#, c-format
msgid "On CD-R"
msgstr "на CDROM"

#: standalone/drakbackup:2428
#, c-format
msgid "On Tape Device"
msgstr "на пристрій читання магнітної плівки"

#: standalone/drakbackup:2468
#, c-format
msgid "Backup Users"
msgstr "Резервувати користувачів"

#: standalone/drakbackup:2469
#, c-format
msgid " (Default is all users)"
msgstr " (Типово всі користувачі)"

#: standalone/drakbackup:2481
#, c-format
msgid "Please choose what you want to backup"
msgstr "Будь-ласка, вкажіть, що Ви хочете резервувати"

#: standalone/drakbackup:2482
#, c-format
msgid "Backup System"
msgstr "Резервування системи"

#: standalone/drakbackup:2484
#, c-format
msgid "Select user manually"
msgstr "Вибрати користувача вручну"

#: standalone/drakbackup:2513
#, c-format
msgid "Please select data to backup..."
msgstr "Будь-ласка, вкажіть дані для резервування..."

#: standalone/drakbackup:2585
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Джерела резервування:\n"

#: standalone/drakbackup:2586
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Системні файли:\n"

#: standalone/drakbackup:2588
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Файли користувача:\n"

#: standalone/drakbackup:2590
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Інші файли:\n"

#: standalone/drakbackup:2592
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Зберегти на твердий диск в теку : %s\n"

#: standalone/drakbackup:2593
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\tОбмежити використання диску до %s Mб\n"

#: standalone/drakbackup:2596
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Видалити tar-файли з твердого диску після резервування.\n"

#: standalone/drakbackup:2600
#, c-format
msgid "NO"
msgstr "НІ"

#: standalone/drakbackup:2601
#, c-format
msgid "YES"
msgstr "ТАК"

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Записати на КД"

#: standalone/drakbackup:2603
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2604
#, c-format
msgid " on device: %s"
msgstr " на пристрої: %s"

#: standalone/drakbackup:2605
#, c-format
msgid " (multi-session)"
msgstr " (багатосесійний)"

#: standalone/drakbackup:2606
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
" Зберегти на плівку на пристрої: %s"

#: standalone/drakbackup:2607
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tВитерти=%s"

#: standalone/drakbackup:2610
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Зберегти через %s на машину: %s\n"

#: standalone/drakbackup:2611
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t ім'я користувача: %s\n"
"\t\t в теку: %s \n"

#: standalone/drakbackup:2612
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Параметри:\n"

#: standalone/drakbackup:2613
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tНе включати системні файли\n"

#: standalone/drakbackup:2615
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tДля резервування використовується tar і bzip2\n"

#: standalone/drakbackup:2616
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tДля резервування використовуються tar і gzip\n"

#: standalone/drakbackup:2617
#, fuzzy, c-format
msgid "\tBackups use tar only\n"
msgstr "\tДля резервування використовуються tar і gzip\n"

#: standalone/drakbackup:2619
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tВикористовувати файли .backupignore\n"

#: standalone/drakbackup:2620
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\tВідіслати пошту на %s\n"

#: standalone/drakbackup:2621
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "На сервер CUPS \"%s\""

#: standalone/drakbackup:2623
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Служба %s за посередництвом:\n"

#: standalone/drakbackup:2624
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Твердий диск.\n"

#: standalone/drakbackup:2625
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: standalone/drakbackup:2626
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Плівку \n"

#: standalone/drakbackup:2627
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Мережа по FTP.\n"

#: standalone/drakbackup:2628
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Мережа з SSH.\n"

#: standalone/drakbackup:2629
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Мережа з rsync.\n"

#: standalone/drakbackup:2630
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Мережа з webdav.\n"

#: standalone/drakbackup:2632
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Немає конфігурації, будь-ласка, натисніть Помічник або Додатково.\n"

#: standalone/drakbackup:2637
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Перелік даних для відновлення:\n"
"\n"

#: standalone/drakbackup:2639
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr ""
"\n"
"- Системні файли:\n"

#: standalone/drakbackup:2641 standalone/drakbackup:2651
#, fuzzy, c-format
msgid "   - from date: %s %s\n"
msgstr "   - дата: %s %s\n"

#: standalone/drakbackup:2644
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr ""
"\n"
"- Файли користувача:\n"

#: standalone/drakbackup:2649
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr ""
"\n"
"- Інші файли:\n"

#: standalone/drakbackup:2830
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Список даних пошкоджено:\n"
"\n"

#: standalone/drakbackup:2832
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Будь ласка, відмініть вибір зараз або наступного разу."

#: standalone/drakbackup:2842
#, c-format
msgid "Backup files are corrupted"
msgstr "Резервні файли пошкоджені"

#: standalone/drakbackup:2863
#, c-format
msgid "          All of your selected data have been          "
msgstr "            Всі вибрані Вами дані були             "

#: standalone/drakbackup:2864
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Успішно відновлено на %s       "

#: standalone/drakbackup:2987
#, c-format
msgid "         Restore Configuration       "
msgstr "         Відновити конфігурацію       "

#: standalone/drakbackup:3015
#, c-format
msgid "OK to restore the other files."
msgstr "Гаразд для відновлення інших файлів."

#: standalone/drakbackup:3031
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Список користувачів для відновлення (важлива тільки остання дата для "
"користувача)"

#: standalone/drakbackup:3098
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "будь-ласка, вкажіть дату для відновлення"

#: standalone/drakbackup:3135
#, c-format
msgid "Restore from Hard Disk."
msgstr "Відновити з твердого диску."

#: standalone/drakbackup:3137
#, c-format
msgid "Enter the directory where backups are stored"
msgstr "Введіть теку, де зберігаються резервні копії"

#: standalone/drakbackup:3141
#, fuzzy, c-format
msgid "Directory with backups"
msgstr "Відновити усі резервні копії"

#: standalone/drakbackup:3194
#, c-format
msgid "Select another media to restore from"
msgstr "Виберіть іншого носія для відновлення"

#: standalone/drakbackup:3196
#, c-format
msgid "Other Media"
msgstr "Інший носій"

#: standalone/drakbackup:3201
#, c-format
msgid "Restore system"
msgstr "Відновити систему"

#: standalone/drakbackup:3202
#, c-format
msgid "Restore Users"
msgstr "Відновити користувачів"

#: standalone/drakbackup:3203
#, c-format
msgid "Restore Other"
msgstr "Відновити інші"

#: standalone/drakbackup:3205
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "вкажіть шлях для відновлення (замість /)"

#: standalone/drakbackup:3209 standalone/drakbackup:3490
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "Спеціальне відновлення"

#: standalone/drakbackup:3212
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Зробити нове резервування перед відновленням (тільки для наростаючих "
"резервувань)."

#: standalone/drakbackup:3214
#, c-format
msgid "Remove user directories before restore."
msgstr "Видалити теки користувача перед відновленням."

#: standalone/drakbackup:3298
#, fuzzy, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr "Текст назви файла для пошуку:"

#: standalone/drakbackup:3301
#, c-format
msgid "Search Backups"
msgstr "Шукати резервні копії"

#: standalone/drakbackup:3320
#, fuzzy, c-format
msgid "No matches found..."
msgstr "Образу не знайдено"

#: standalone/drakbackup:3324
#, c-format
msgid "Restore Selected"
msgstr "Відновити вибране"

#: standalone/drakbackup:3458
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3464
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Відновити вибраний\n"
"пункт каталога"

#: standalone/drakbackup:3473
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Відновити вибрані\n"
"файли"

#: standalone/drakbackup:3550
#, c-format
msgid "Backup files not found at %s."
msgstr "Резервних файлів в %s не знайдено."

#: standalone/drakbackup:3563
#, c-format
msgid "Restore From CD"
msgstr "Відновити з КД"

#: standalone/drakbackup:3563
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Вставте компакт-диск з міткою %s\n"
"в привід, змонтований в /mnt/cdrom"

#: standalone/drakbackup:3565
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "Неправильна мітка КД. Диск помічено як %s."

#: standalone/drakbackup:3575
#, c-format
msgid "Restore From Tape"
msgstr "Відновити з плівки"

#: standalone/drakbackup:3575
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Вставте стрічку з міткою тома %s\n"
"в пристрій %s"

#: standalone/drakbackup:3577
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "Неправильна мітка плівки. Плівка має мітку %s."

#: standalone/drakbackup:3588
#, c-format
msgid "Restore Via Network"
msgstr "Відновити по мережі"

#: standalone/drakbackup:3588
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Відновити через мережевий протокол: %s"

#: standalone/drakbackup:3589
#, c-format
msgid "Host Name"
msgstr "Назва машини"

#: standalone/drakbackup:3590
#, c-format
msgid "Host Path or Module"
msgstr "Шлях до машини або модуля"

#: standalone/drakbackup:3597
#, c-format
msgid "Password required"
msgstr "Потрібний пароль"

#: standalone/drakbackup:3603
#, c-format
msgid "Username required"
msgstr "Необхідне ім'я користувача"

#: standalone/drakbackup:3606
#, c-format
msgid "Hostname required"
msgstr "Потрібна назва машини"

#: standalone/drakbackup:3611
#, c-format
msgid "Path or Module required"
msgstr "Потрібний шлях або модуль"

#: standalone/drakbackup:3624
#, c-format
msgid "Files Restored..."
msgstr "Відновлено файлів..."

#: standalone/drakbackup:3627
#, c-format
msgid "Restore Failed..."
msgstr "Відновлення невдале..."

#: standalone/drakbackup:3737 standalone/drakbackup:3754
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "%s не знайдено...\n"

#: standalone/drakbackup:3880 standalone/drakbackup:3953
#, c-format
msgid "Search for files to restore"
msgstr "Шукати файли для відновлення"

#: standalone/drakbackup:3885
#, c-format
msgid "Restore all backups"
msgstr "Відновити усі резервні копії"

#: standalone/drakbackup:3894
#, c-format
msgid "Custom Restore"
msgstr "Спеціальне відновлення"

#: standalone/drakbackup:3899 standalone/drakbackup:3949
#, c-format
msgid "Restore From Catalog"
msgstr "Відновити з теки"

#: standalone/drakbackup:3921
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Неможливо знайти резервні копії для відновлення...\n"

#: standalone/drakbackup:3922
#, c-format
msgid "Verify that %s is the correct path"
msgstr "Перевірте, чи %s є правильним шляхом"

#: standalone/drakbackup:3923
#, c-format
msgid " and the CD is in the drive"
msgstr " і КД знаходиться в приводі"

#: standalone/drakbackup:3925
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""
"Резервні копії на незмонтованому носії - Використовуйте Теку для відновлення"

#: standalone/drakbackup:3941
#, c-format
msgid "CD in place - continue."
msgstr "КД на місці - продовжити."

#: standalone/drakbackup:3946
#, c-format
msgid "Browse to new restore repository."
msgstr "Переглянути новий архів резервувань."

#: standalone/drakbackup:3947
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "Відновити з КД"

#: standalone/drakbackup:3986
#, c-format
msgid "Restore Progress"
msgstr "Поступ відновлення"

#: standalone/drakbackup:4016 standalone/drakbackup:4123
#: standalone/logdrake:174
#, c-format
msgid "Save"
msgstr "Зберегти"

#: standalone/drakbackup:4099
#, c-format
msgid "Build Backup"
msgstr "Створити резервну копію"

#: standalone/drakbackup:4147 standalone/drakbackup:4512
#, c-format
msgid "Restore"
msgstr "Відновити"

#: standalone/drakbackup:4277
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Наступні пакунки повинні бути встановлені:\n"

#: standalone/drakbackup:4304
#, c-format
msgid "Please select data to restore..."
msgstr "Вкажіть, будь-ласка, дані для відновлення..."

#: standalone/drakbackup:4344
#, c-format
msgid "Backup system files"
msgstr "Резервувати системні файли"

#: standalone/drakbackup:4347
#, c-format
msgid "Backup user files"
msgstr "Резервувати файли користувача"

#: standalone/drakbackup:4350
#, c-format
msgid "Backup other files"
msgstr "Резервувати інші файли"

#: standalone/drakbackup:4353 standalone/drakbackup:4389
#, c-format
msgid "Total Progress"
msgstr "Загальний поступ"

#: standalone/drakbackup:4381
#, c-format
msgid "Sending files by FTP"
msgstr "Відсилаються файли по FTP"

#: standalone/drakbackup:4384
#, c-format
msgid "Sending files..."
msgstr "Відсилання файлів..."

#: standalone/drakbackup:4455
#, c-format
msgid "Backup Now from configuration file"
msgstr "Зарезервувати з конфігураційного файла"

#: standalone/drakbackup:4460
#, c-format
msgid "View Backup Configuration."
msgstr "Показати конфігурацію резервування."

#: standalone/drakbackup:4486
#, c-format
msgid "Wizard Configuration"
msgstr "Конфігурація Помічника"

#: standalone/drakbackup:4491
#, c-format
msgid "Advanced Configuration"
msgstr "Додаткові налаштування"

#: standalone/drakbackup:4496
#, c-format
msgid "View Configuration"
msgstr "Переглянути конфіґурацію"

#: standalone/drakbackup:4500
#, c-format
msgid "View Last Log"
msgstr "Переглянути останній запис у журналі"

#: standalone/drakbackup:4505
#, c-format
msgid "Backup Now"
msgstr "Зарезервувати зараз"

#: standalone/drakbackup:4509
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Файла конфігурації не знайдено, \n"
"будь-ласка, натисніть Помічник або Додатково."

#: standalone/drakbackup:4530 standalone/drakbackup:4533
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:57
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "Вибір моделі друкарки"

#: standalone/drakboot:57
#, c-format
msgid "System mode"
msgstr "Системний режим"

#: standalone/drakboot:67 standalone/drakfloppy:46 standalone/harddrake2:97
#: standalone/harddrake2:98 standalone/logdrake:71 standalone/printerdrake:150
#: standalone/printerdrake:151 standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/Файл"

#: standalone/drakboot:68 standalone/drakfloppy:47 standalone/logdrake:77
#, c-format
msgid "/File/_Quit"
msgstr "/Файл/Вийти"

#: standalone/drakboot:68 standalone/drakfloppy:47 standalone/harddrake2:98
#: standalone/logdrake:77 standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:119
#, c-format
msgid "Install themes"
msgstr "Встановити теми"

#: standalone/drakboot:120
#, c-format
msgid "Create new theme"
msgstr "Створити нову тему"

#: standalone/drakboot:134
#, fuzzy, c-format
msgid "Use graphical boot"
msgstr "Використовувати графічне завантаження"

#: standalone/drakboot:139
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:146
#, fuzzy, c-format
msgid "Theme"
msgstr "Теми"

#: standalone/drakboot:149
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Показувати тему\n"
"над консоллю"

#: standalone/drakboot:158
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Запускати графічну оболонку при завантаженні системи"

#: standalone/drakboot:166
#, c-format
msgid "No, I don't want autologin"
msgstr "Ні, мені не потрібна автоматична реєстрація"

#: standalone/drakboot:167
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
"Так, я хочу автоматично реєструватися в системі з цим (іменем, стільницею)"

#: standalone/drakboot:173
#, c-format
msgid "Default user"
msgstr "Типовий користувач"

#: standalone/drakboot:174
#, c-format
msgid "Default desktop"
msgstr "Типова стільниця"

#: standalone/drakboot:238
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Установка %s неуспішна. Сталася наступна помилка:"

#: standalone/drakbug:40
#, c-format
msgid ""
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""
"Щоб відправити звіт про помилку, натисніть на кнопку звіту.\n"
"Це відкриє вікно переглядача тенет на %s,\n"
"де Ви знайдете форму для заповнення. Інформацію, подану вище\n"
"буде відправлено на цей сервер."

#: standalone/drakbug:48
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Програма створення звітів про помилки Mandrake"

#: standalone/drakbug:53
#, c-format
msgid "Mandrake Control Center"
msgstr "Центр керування Мандрейк"

#: standalone/drakbug:55
#, c-format
msgid "Synchronization tool"
msgstr "Програма для синхронізації"

#: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204
#: standalone/drakbug:206 standalone/drakbug:210
#, c-format
msgid "Standalone Tools"
msgstr "Самостійні інструменти"

#: standalone/drakbug:57
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:58
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: standalone/drakbug:59
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:60
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:61
#, c-format
msgid "Remote Control"
msgstr "Віддалене керування"

#: standalone/drakbug:62
#, c-format
msgid "Software Manager"
msgstr "Менеджер програм"

#: standalone/drakbug:63
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:64
#, c-format
msgid "Windows Migration tool"
msgstr "Інструмент Windows Migration"

#: standalone/drakbug:65
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:66
#, c-format
msgid "Configuration Wizards"
msgstr "Помічники налаштування"

#: standalone/drakbug:84
#, c-format
msgid ""
"To submit a bug report, click the report button, which will open your "
"default browser\n"
"to Anthill where you will be able to upload the above information as a bug "
"report."
msgstr ""
"Щоб відправити звіт про помилку, натисніть на кнопку звіту, яка відкриє "
"сторінку Anthill\n"
"у Вашому типовому переглядачі тенет, де Ви зможете звантажити форму для "
"заповнення інформації про помилку."

#: standalone/drakbug:102
#, c-format
msgid "Application:"
msgstr "Програма:"

#: standalone/drakbug:103 standalone/drakbug:115
#, c-format
msgid "Package: "
msgstr "Пакунок: "

#: standalone/drakbug:104
#, c-format
msgid "Kernel:"
msgstr "Ядро:"

#: standalone/drakbug:105 standalone/drakbug:116
#, c-format
msgid "Release: "
msgstr "Випуск: "

#: standalone/drakbug:110
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""
"Назва програми,\n"
"або повний шлях:"

#: standalone/drakbug:113
#, c-format
msgid "Find Package"
msgstr "Знайти пакунок"

#: standalone/drakbug:117
#, c-format
msgid "Summary: "
msgstr "Загалом: "

#: standalone/drakbug:129
#, c-format
msgid "YOUR TEXT HERE"
msgstr "ВАШ ТЕКСТ ТУТ"

#: standalone/drakbug:132
#, c-format
msgid "Bug Description/System Information"
msgstr "Опис помилки/Системна інформації"

#: standalone/drakbug:136
#, c-format
msgid "Submit kernel version"
msgstr "Надати версію ядра"

#: standalone/drakbug:137
#, c-format
msgid "Submit cpuinfo"
msgstr "Надати cpuinfo"

#: standalone/drakbug:138
#, c-format
msgid "Submit lspci"
msgstr "Надати lspci"

#: standalone/drakbug:159
#, c-format
msgid "Report"
msgstr "Звіт"

#: standalone/drakbug:219
#, c-format
msgid "Not installed"
msgstr "Не встановлено"

#: standalone/drakbug:231
#, c-format
msgid "Package not installed"
msgstr "Пакунок не встановлено"

#: standalone/drakbug:248
#, c-format
msgid "NOT FOUND"
msgstr "НЕ ЗНАЙДЕНО"

#: standalone/drakbug:259
#, c-format
msgid "connecting to %s ..."
msgstr "з'єднання з %s ..."

#: standalone/drakbug:267
#, c-format
msgid "No browser available! Please install one"
msgstr "Немає жодного переглядача. Будь-ласка, встановіть хоч одного"

#: standalone/drakbug:286
#, c-format
msgid "Please enter a package name."
msgstr "Введіть, будь-ласка, назву пакунка."

#: standalone/drakbug:292
#, c-format
msgid "Please enter summary text."
msgstr "Будь-ласка, введіть підсумковий текст."

#: standalone/drakclock:29
#, fuzzy, c-format
msgid "DrakClock"
msgstr "Drakbackup"

#: standalone/drakclock:36
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "Часовий пояс"

#: standalone/drakclock:42
#, c-format
msgid "Timezone - DrakClock"
msgstr "Часова зона - DrakClock"

#: standalone/drakclock:44
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - DrakClock"

#: standalone/drakclock:44
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Годинник встановлено в GMT"

#: standalone/drakclock:71
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Інтерфейс мережі"

#: standalone/drakclock:73
#, fuzzy, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""
"Ваш комп'ютер може синхронізувати годинник\n"
"з віддаленим сервером часу, використовуючм NTP."

#: standalone/drakclock:74
#, fuzzy, c-format
msgid "Enable Network Time Protocol"
msgstr "Відновити через мережевий протокол: %s"

#: standalone/drakclock:82
#, fuzzy, c-format
msgid "Server:"
msgstr "Сервер: "

#: standalone/drakclock:129 standalone/drakclock:141
#, fuzzy, c-format
msgid "Reset"
msgstr "Відкинути"

#: standalone/drakclock:204
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp ?"
msgstr ""
"Необхідно встановити пакунок ntp\n"
"для дозволення протоколу мережного часу\n"
"\n"
"Ви бажаєте встановити ntp?"

#: standalone/drakconnect:81
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Конфігурація мережі (%d адаптерів)"

#: standalone/drakconnect:92 standalone/drakconnect:728
#, c-format
msgid "Gateway:"
msgstr "Шлюз:"

#: standalone/drakconnect:92 standalone/drakconnect:728
#, c-format
msgid "Interface:"
msgstr "Інтерфейс:"

#: standalone/drakconnect:96 standalone/net_monitor:105
#, c-format
msgid "Wait please"
msgstr "Зачекайте, будь-ласка"

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "Інтерфейс"

#: standalone/drakconnect:116 standalone/drakups:233
#, c-format
msgid "Driver"
msgstr "Драйвер"

#: standalone/drakconnect:116
#, c-format
msgid "State"
msgstr "Статус"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr "Назва машини:"

#: standalone/drakconnect:135
#, c-format
msgid "Configure hostname..."
msgstr "Налаштувати назву машини..."

#: standalone/drakconnect:149 standalone/drakconnect:769
#, c-format
msgid "LAN configuration"
msgstr "Конфіґурація мережі"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "Налаштувати місцеву мережу..."

#: standalone/drakconnect:162 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Застосувати"

#: standalone/drakconnect:197
#, fuzzy, c-format
msgid "Manage connections"
msgstr "Кабельне з'єднання"

#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:298
#: standalone/drakconnect:308 standalone/drakconnect:309
#: standalone/drakconnect:576
#, fuzzy, c-format
msgid "TCP/IP"
msgstr "TCP/IP"

#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:444
#: standalone/drakconnect:448 standalone/drakconnect:576
#, fuzzy, c-format
msgid "Account"
msgstr "Про"

#: standalone/drakconnect:298 standalone/drakconnect:370
#: standalone/drakconnect:371 standalone/drakconnect:576
#, fuzzy, c-format
msgid "Wireless"
msgstr "Безпровідний"

#: standalone/drakconnect:344
#, fuzzy, c-format
msgid "DNS servers"
msgstr "Сервер DNS"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "Search Domain"
msgstr "Домен NIS"

#: standalone/drakconnect:359
#, fuzzy, c-format
msgid "static"
msgstr "Автоматична IP"

#: standalone/drakconnect:359
#, c-format
msgid "DHCP"
msgstr ""

#: standalone/drakconnect:482
#, fuzzy, c-format
msgid "Flow control"
msgstr "<control>S"

#: standalone/drakconnect:483
#, fuzzy, c-format
msgid "Line termination"
msgstr "Станція для інтернету"

#: standalone/drakconnect:493
#, fuzzy, c-format
msgid "Use lock file"
msgstr "Виберіть файл"

#: standalone/drakconnect:496
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Затримка командної оболонки"

#: standalone/drakconnect:500
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:503
#, fuzzy, c-format
msgid "Busy wait"
msgstr "Кувейт"

#: standalone/drakconnect:507
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Модем"

#: standalone/drakconnect:508
#, fuzzy, c-format
msgid "Enable"
msgstr "увімкнути"

#: standalone/drakconnect:508
#, fuzzy, c-format
msgid "Disable"
msgstr "відімкнути"

#: standalone/drakconnect:558 standalone/harddrake2:58
#, c-format
msgid "Media class"
msgstr "Клас носія"

#: standalone/drakconnect:559 standalone/drakfloppy:140
#, c-format
msgid "Module name"
msgstr "Назва модуля"

#: standalone/drakconnect:560
#, fuzzy, c-format
msgid "Mac Address"
msgstr "Оповіщувальна адреса:"

#: standalone/drakconnect:561 standalone/harddrake2:21
#, c-format
msgid "Bus"
msgstr "Шина"

#: standalone/drakconnect:562 standalone/harddrake2:29
#, c-format
msgid "Location on the bus"
msgstr "Розташування на шині"

#: standalone/drakconnect:632 standalone/drakgw:248 standalone/drakpxe:138
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"У Вашій системі немає сконфіґурованого адаптера мережі ethernet. "
"Скористайтесь, будь-ласка, програмою для конфігурації апаратних засобів."

#: standalone/drakconnect:638
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "Виберіть інтерфейс мережі"

#: standalone/drakconnect:642
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "Виберіть інтерфейс мережі"

#: standalone/drakconnect:656
#, fuzzy, c-format
msgid ""
"An error occured while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"Проблема при перезапуску мережі:\n"
"\n"
"%s"

#: standalone/drakconnect:658
#, fuzzy, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been succesfully deleted"
msgstr "Вітаємо, мережний інтерфейс \"%s\" було успішно видалено."

#: standalone/drakconnect:675
#, c-format
msgid "No Ip"
msgstr "Немає Ip"

#: standalone/drakconnect:676
#, c-format
msgid "No Mask"
msgstr "Маски немає"

#: standalone/drakconnect:677 standalone/drakconnect:840
#, fuzzy, c-format
msgid "up"
msgstr "вгору"

#: standalone/drakconnect:677 standalone/drakconnect:840
#, fuzzy, c-format
msgid "down"
msgstr "виконано"

#: standalone/drakconnect:718 standalone/net_monitor:415
#, c-format
msgid "Connected"
msgstr "Під'єднано"

#: standalone/drakconnect:718 standalone/net_monitor:415
#, c-format
msgid "Not connected"
msgstr "Не з'єднано"

#: standalone/drakconnect:720
#, c-format
msgid "Disconnect..."
msgstr "Від'єднання..."

#: standalone/drakconnect:720
#, c-format
msgid "Connect..."
msgstr "З'єднання..."

#: standalone/drakconnect:749
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""
"Попередження, виявлено інше під'єднання до Інтернету, яке, можливо, "
"використовує Вашу мережу"

#: standalone/drakconnect:765
#, c-format
msgid "Deactivate now"
msgstr "Деактивізувати зараз"

#: standalone/drakconnect:765
#, c-format
msgid "Activate now"
msgstr "Активізувати зараз"

#: standalone/drakconnect:773
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"У вас немає жодного сконфіґурованого інтерфейса.\n"
"Сконфіґуруйте їх спочатку, клацнувши на 'Налаштувати'"

#: standalone/drakconnect:787
#, c-format
msgid "LAN Configuration"
msgstr "Конфіґурація локальної мережі"

#: standalone/drakconnect:799
#, c-format
msgid "Adapter %s: %s"
msgstr "Плата %s: %s"

#: standalone/drakconnect:808
#, c-format
msgid "Boot Protocol"
msgstr "Протокол завантаження"

#: standalone/drakconnect:809
#, c-format
msgid "Started on boot"
msgstr "Стартувати при завантаженні"

#: standalone/drakconnect:845
#, fuzzy, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrake Control Center"
msgstr ""
"Цей інтерфейс ще не було сконфігуровано.\n"
"Запустіть в головному вікні Помічника налаштування"

#: standalone/drakconnect:900
#, fuzzy, c-format
msgid ""
"You don't have any configured Internet connection.\n"
"Please run \"Internet access\" in control center."
msgstr ""
"Ви не маєте жодного з'єднання з інтернетом.\n"
"Створіть таке з'єднання, клацнувши на \"Налаштувати\""

#: standalone/drakconnect:908
#, c-format
msgid "Internet connection configuration"
msgstr "Конфігурація з'єднання з інтернетом"

#: standalone/drakconnect:926
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "Перший сервер DNS (необов'язково)"

#: standalone/drakconnect:948
#, c-format
msgid "Internet Connection Configuration"
msgstr "Конфігурація з'єднання з інтернетом"

#: standalone/drakconnect:949
#, c-format
msgid "Internet access"
msgstr "Доступ до інтернету"

#: standalone/drakconnect:951 standalone/net_monitor:87
#, c-format
msgid "Connection type: "
msgstr "Тип з'єднання: "

#: standalone/drakconnect:954
#, c-format
msgid "Status:"
msgstr "Статус:"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr "Вибір менеджера екрану"

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"Менеджер екрану X11 надає графічне середовище для реєстрації\n"
"в системі з X Window і дає змогу виконувати одночасно декілька\n"
"сеансів X на Вашій локальній машині."

#: standalone/drakedm:77
#, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr "Зміни виконано, Ви хочете перезапустити сервіс dm?"

#: standalone/drakfloppy:40
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:82
#, c-format
msgid "Boot disk creation"
msgstr "Створення диску завантаження"

#: standalone/drakfloppy:83
#, c-format
msgid "General"
msgstr "Загальні"

#: standalone/drakfloppy:86
#, c-format
msgid "Device"
msgstr "Пристрій: "

#: standalone/drakfloppy:92
#, c-format
msgid "Kernel version"
msgstr "Версія ядра"

#: standalone/drakfloppy:107
#, c-format
msgid "Preferences"
msgstr "Вподобання"

#: standalone/drakfloppy:121
#, c-format
msgid "Advanced preferences"
msgstr "Додаткові вподобання"

#: standalone/drakfloppy:140
#, c-format
msgid "Size"
msgstr "Розмір"

#: standalone/drakfloppy:143
#, fuzzy, c-format
msgid "Mkinitrd optional arguments"
msgstr "додаткові арґументи для mkinitrd"

#: standalone/drakfloppy:145
#, c-format
msgid "force"
msgstr "примусово"

#: standalone/drakfloppy:146
#, c-format
msgid "omit raid modules"
msgstr "пропускати модулі raid"

#: standalone/drakfloppy:147
#, c-format
msgid "if needed"
msgstr "якщо потрібно"

#: standalone/drakfloppy:148
#, c-format
msgid "omit scsi modules"
msgstr "пропускати модулі scsi"

#: standalone/drakfloppy:151
#, c-format
msgid "Add a module"
msgstr "Додати модуль"

#: standalone/drakfloppy:160
#, c-format
msgid "Remove a module"
msgstr "Забрати модуль"

#: standalone/drakfloppy:295
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Переконайтеся, що носія вставлено в привід %s"

#: standalone/drakfloppy:301
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Немає носія в пристрої %s, або він захищений від запису.\n"
"Будь ласка, вставте його."

#: standalone/drakfloppy:305
#, c-format
msgid "Unable to fork: %s"
msgstr "Неможливо розгалузити: %s"

#: standalone/drakfloppy:308
#, c-format
msgid "Floppy creation completed"
msgstr "Створення дискети завершено"

#: standalone/drakfloppy:308
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr "Створення дискети для завантаження завершено успішно \n"

#: standalone/drakfloppy:311
#, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"Не можу коректно завершити mkbootdisk: \n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "Пошук встановлених шрифтів"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr "Зняти виділення з встановлених шрифтів"

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr "проаналізувати всі шрифти"

#: standalone/drakfont:210
#, fuzzy, c-format
msgid "No fonts found"
msgstr "шрифтів не знайдено"

#: standalone/drakfont:218 standalone/drakfont:258 standalone/drakfont:325
#: standalone/drakfont:358 standalone/drakfont:366 standalone/drakfont:392
#: standalone/drakfont:410 standalone/drakfont:424
#, c-format
msgid "done"
msgstr "виконано"

#: standalone/drakfont:223
#, fuzzy, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "не вдалося знайти жодного шрифта у змонтованих розділах"

#: standalone/drakfont:256
#, c-format
msgid "Reselect correct fonts"
msgstr "Вибрати правильні шрифти по-новому"

#: standalone/drakfont:259
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "не вдалося знайти жодного шрифта.\n"

#: standalone/drakfont:269
#, c-format
msgid "Search for fonts in installed list"
msgstr "Шукати шрифти в списку встановлених"

#: standalone/drakfont:294
#, c-format
msgid "%s fonts conversion"
msgstr "перетворення %s шрифтів"

#: standalone/drakfont:323
#, c-format
msgid "Fonts copy"
msgstr "Копія шрифтів"

#: standalone/drakfont:326
#, c-format
msgid "True Type fonts installation"
msgstr "Встановлення шрифтів True Type"

#: standalone/drakfont:333
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "будь-ласка, зачекайте, поки виконується ttmkfdir..."

#: standalone/drakfont:334
#, c-format
msgid "True Type install done"
msgstr "Встановлення True Type виконано"

#: standalone/drakfont:340 standalone/drakfont:355
#, c-format
msgid "type1inst building"
msgstr "створення type1inst"

#: standalone/drakfont:349
#, c-format
msgid "Ghostscript referencing"
msgstr "створення зв'язків Ghostscript"

#: standalone/drakfont:359
#, c-format
msgid "Suppress Temporary Files"
msgstr "Видалити тимчасові файли"

#: standalone/drakfont:362
#, c-format
msgid "Restart XFS"
msgstr "Перезапустити XFS"

#: standalone/drakfont:408 standalone/drakfont:418
#, c-format
msgid "Suppress Fonts Files"
msgstr "Вилучити файли шрифтів"

#: standalone/drakfont:420
#, c-format
msgid "xfs restart"
msgstr "перезапуск xfs"

#: standalone/drakfont:428
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Перед встановленням будь-яких шрифтів переконайтеся, що Ви маєте права на їх "
"використання і встановлення у Вашу систему.\n"
"\n"
"-Ви можете встановити шрифти звичайним способом. В рідких випадках "
"відсутність шрифтів може призвести до зависання Х-сервера."

#: standalone/drakfont:477 standalone/drakfont:486
#, fuzzy, c-format
msgid "DrakFont"
msgstr "DrakFont"

#: standalone/drakfont:487
#, c-format
msgid "Font List"
msgstr "Список шрифтів"

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "Про"

#: standalone/drakfont:495 standalone/drakfont:687 standalone/drakfont:725
#, fuzzy, c-format
msgid "Uninstall"
msgstr "Завершення видалення"

#: standalone/drakfont:496
#, fuzzy, c-format
msgid "Import"
msgstr "Імпортувати шрифти"

#: standalone/drakfont:512
#, fuzzy, c-format
msgid ""
"Copyright (C) 2001-2002 by MandrakeSoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""
"Авторські права C   MandrakeSoft н н\n"
" версія н\n"
"<dchaumette@mandrakesoft.com> н\n"
"<tvignaud@mandrakesoft.com>"

#: standalone/drakfont:521
#, fuzzy, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
"Ця програма є безкоштовною; Ви можете розповсюджувати її та/або\n"
"змінювати її згідно умов загальної публічної ліцензії GNU, опублікованої\n"
"фундацією безкоштовних програм; версії 2 або будь-якої пізнішої.\n"
"\n"
"Ця програма розповсюджується з надією, що може бути придатною, але\n"
"БЕЗ БУДЬ-ЯКОЇ ГАРАНТІЇ; навіть без припущення гарантії ПРАЦЕЗДАТНОСТІ\n"
"або ПРИДАТНОСТІ ДЛЯ КОНКРЕТНОЇ МЕТИ. Деталі дивіться в загальній\n"
"публічній ліцензії GNU.\n"
"\n"
"Ви повинні були отримати копію загальної публічної ліцензії GNU разом з "
"цією\n"
"програмою; якщо ні - напишіть у Free Software Foundation, Inc.,\n"
"59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.\n"

#: standalone/drakfont:537
#, fuzzy, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""
"Подяки н\n"
" н і   н і Перетворити Windows file до Шрифт н\n"
" н і   н і файли каталог н\n"
" н і   Тижні\n"
" Перетворити файли до та н"

#: standalone/drakfont:556
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Виберіть програми, які будуть підтримувати шрифти:"

#: standalone/drakfont:557
#, fuzzy, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Перед встановленням будь-яких шрифтів переконайтеся, що Ви маєте права на їх "
"використання і встановлення у Вашу систему.\n"
"\n"
"-Ви можете встановити шрифти звичайним способом. В рідких випадках "
"відсутність шрифтів може призвести до зависання Х-сервера."

#: standalone/drakfont:567
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:568
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:569
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:570
#, c-format
msgid "Generic Printers"
msgstr "Стандартні друкарки"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Виберіть файл шрифта або теку і клацніть на Додати "

#: standalone/drakfont:587
#, c-format
msgid "File Selection"
msgstr "Вибір файла"

#: standalone/drakfont:600
#, c-format
msgid "You've not selected any font"
msgstr "Ви не вибрали жодного шрифта"

#: standalone/drakfont:652
#, fuzzy, c-format
msgid "Import fonts"
msgstr "Імпортувати шрифти"

#: standalone/drakfont:657
#, fuzzy, c-format
msgid "Install fonts"
msgstr "Видалити шрифти"

#: standalone/drakfont:692
#, c-format
msgid "click here if you are sure."
msgstr "натисніть тут, якщо Ви впевнені."

#: standalone/drakfont:694
#, c-format
msgid "here if no."
msgstr "сюди, якщо ні."

#: standalone/drakfont:733
#, c-format
msgid "Unselected All"
msgstr "Скасувати весь вибір"

#: standalone/drakfont:736
#, c-format
msgid "Selected All"
msgstr "Вибрати все"

#: standalone/drakfont:739
#, c-format
msgid "Remove List"
msgstr "Видалити список"

#: standalone/drakfont:750 standalone/drakfont:769
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "Імпортувати шрифти"

#: standalone/drakfont:754 standalone/drakfont:774
#, c-format
msgid "Initial tests"
msgstr "Початкові тести"

#: standalone/drakfont:755
#, c-format
msgid "Copy fonts on your system"
msgstr "Копіювати шрифти в систему"

#: standalone/drakfont:756
#, c-format
msgid "Install & convert Fonts"
msgstr "Встановлення і конвертування шрифтів"

#: standalone/drakfont:757
#, c-format
msgid "Post Install"
msgstr "Завершення встановлення"

#: standalone/drakfont:775
#, c-format
msgid "Remove fonts on your system"
msgstr "Видалення шрифтів з Вашої системи"

#: standalone/drakfont:776
#, c-format
msgid "Post Uninstall"
msgstr "Завершення видалення"

#: standalone/drakgw:58 standalone/drakgw:193
#, c-format
msgid "Internet Connection Sharing"
msgstr "Доступ до з'єднання з інтернетом"

#: standalone/drakgw:124
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Спільне користування з'єднанням з інтернетом вимкнене"

#: standalone/drakgw:125
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Встановлення доступу до з'єднання з інтернетом вже\n"
"було зроблене. Доступ в даний момент вимкнено.\n"
"\n"
"Що Ви бажаєте зробити?"

#: standalone/drakgw:129 standalone/drakvpn:125
#, c-format
msgid "enable"
msgstr "увімкнути"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:99
#: standalone/drakvpn:125
#, c-format
msgid "reconfigure"
msgstr "переналаштувати"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:99
#: standalone/drakvpn:125 standalone/drakvpn:374 standalone/drakvpn:733
#, c-format
msgid "dismiss"
msgstr "відмінити"

#: standalone/drakgw:136
#, c-format
msgid "Enabling servers..."
msgstr "Вмикаю сервери..."

#: standalone/drakgw:148
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Доступ до користування з'єднанням з інтернетом увімкнено"

#: standalone/drakgw:151
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Доступ до з'єднання з інтернетом вмикнено"

#: standalone/drakgw:152
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Установка спільного користування з'єднанням з інтернетом вже\n"
"зроблена. Спільне користування в даний момент дозволене.\n"
"\n"
"Що Ви бажаєте зробити?"

#: standalone/drakgw:156 standalone/drakvpn:99
#, c-format
msgid "disable"
msgstr "відімкнути"

#: standalone/drakgw:159
#, c-format
msgid "Disabling servers..."
msgstr "Заборона серверів..."

#: standalone/drakgw:174
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Спільне користування з'єднанням з інтернетом вимкнене."

#: standalone/drakgw:194
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Ви підійшли до налаштування організації спільного доступу до інтернет з "
"Вашого комп'ютера.\n"
"З цією можливістю інші комп'ютери місцевої мережі зможуть використовувати "
"з'єднання з інтернетом цього комп'ютера.\n"
"\n"
"Перш, ніж продовжувати, переконайтеся, що Ви налаштували доступ до мережі/"
"інтернета з допомогою drakconnect \n"
"\n"
"Примітка: Вам для цього потрібно мати плату мережі, щоб встановити\n"
"місцеву мережу (LAN)."

#: standalone/drakgw:237
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Інтерфейс %s (з використанням модуля %s)"

#: standalone/drakgw:238
#, c-format
msgid "Interface %s"
msgstr "Інтерфейс %s"

#: standalone/drakgw:247 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "У Вашій системі немає адаптера мережі!"

#: standalone/drakgw:254
#, c-format
msgid "Network interface"
msgstr "Інтерфейс мережі"

#: standalone/drakgw:255
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"У Вашій системі є тільки один адаптер мережі:\n"
"\n"
"%s\n"
"\n"
"Зараз буде встановлена місцева мережа з цим адаптером."

#: standalone/drakgw:262
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Виберіть, будь-ласка, адаптер, який буде під'єднано до місцевої мережі."

#: standalone/drakgw:291
#, c-format
msgid "Network interface already configured"
msgstr "Мережевий інтерфейс вже налаштовано"

#: standalone/drakgw:292
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Попередження, адаптер мережі (%s) вже налаштовано.\n"
"\n"
"Хочете його автоматично переналаштувати?\n"
"\n"
"Ви можете зробити це вручну, але тоді повинні знати, що робите."

#: standalone/drakgw:297
#, c-format
msgid "Automatic reconfiguration"
msgstr "Автоматична переконфіґурація"

#: standalone/drakgw:297
#, c-format
msgid "No (experts only)"
msgstr "Ні (тільки для експертів)"

#: standalone/drakgw:298
#, c-format
msgid "Show current interface configuration"
msgstr "Показати поточну конфігурацію інтерфейса"

#: standalone/drakgw:299
#, c-format
msgid "Current interface configuration"
msgstr "Поточна конфігурація інтерфейса"

#: standalone/drakgw:300
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Поточна конфігурація '%s':\n"
"\n"
"Мережа: %s\n"
"IP-адреса: %s\n"
"IP-атрибути: %s\n"
"Драйвер: %s"

#: standalone/drakgw:313
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Я можу зберегти Вашу теперішню конфігурацію і прийняти, що Ви вже встановили "
"сервер DHCP; у цьому випадку, будь-ласка, перевірте, чи я правильно прочитав "
"тип Вашої місцевої мережі; я не буду її переналаштовувати і не чіпатиму "
"конфігурацію DHCP-сервера.\n"
"\n"
"Типовим сервером імен є Caching Nameserver, сконфігурований на захисному \n"
"шлюзі. Ви можете замінити його наприклад, на ISP DNS IP.\n"
"\t\t      \n"
"В іншому випадку, я можу переналаштувати Ваш інтерфейс і змінити "
"конфігурацію DHCP-сервера для Вас.\n"
"\n"

#: standalone/drakgw:320
#, c-format
msgid "Local Network adress"
msgstr "Адреса місцевої мережі"

#: standalone/drakgw:324
#, fuzzy, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is."
msgstr ""
"Налаштування сервера DHCP.\n"
"\n"
"Тут Ви можете вибрати різні параметри для налаштування сервера DHCP.\n"
"Якщо Ви не знаєте, що означає той чи інший параметр, просто залиште\n"
"його без змін.\n"

#: standalone/drakgw:328
#, c-format
msgid "(This) DHCP Server IP"
msgstr "IP адреса цього (DHCP) сервера"

#: standalone/drakgw:329
#, c-format
msgid "The DNS Server IP"
msgstr "IP-адреса сервера DNS"

#: standalone/drakgw:330
#, c-format
msgid "The internal domain name"
msgstr "Назва внутрішнього домена"

#: standalone/drakgw:331
#, c-format
msgid "The DHCP start range"
msgstr "Початковий діапазон DHCP"

#: standalone/drakgw:332
#, c-format
msgid "The DHCP end range"
msgstr "Кінцевий діапазон DHCP"

#: standalone/drakgw:333
#, c-format
msgid "The default lease (in seconds)"
msgstr "Володіння типово (в секундах)"

#: standalone/drakgw:334
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Найдовше володіння (в секундах)"

#: standalone/drakgw:335
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Переналаштувати інтерфейс і сервер DHCP"

#: standalone/drakgw:342
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "Місцева мережа не завершується з `.0', виходжу геть."

#: standalone/drakgw:352
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "В даній конфігурації %s знайдено потенційний конфлікт адреси мережі!\n"

#: standalone/drakgw:362
#, c-format
msgid "Configuring..."
msgstr "Встановлюється конфігурація..."

#: standalone/drakgw:363
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Конфіґурація скриптів, встановлення програм, запуск серверів..."

#: standalone/drakgw:399 standalone/drakpxe:231 standalone/drakvpn:276
#, c-format
msgid "Problems installing package %s"
msgstr "Проблеми при встановленні пакунка %s"

#: standalone/drakgw:595
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"Все сконфіґуровано.\n"
"Зараз Ви можете надати доступ до інтернета іншим комп'ютерам Вашої місцевої "
"мережі, використовуючи автоматичне конфіґурування мережі (DHCP)."

#: standalone/drakhelp:17
#, fuzzy, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""
" drakhelp 0.1\n"
"Copyright (C) 2003 MandrakeSoft.\n"
"Ця програма безкоштовна і може розповсюджуватися згідно умов Загальної "
"публічної ліцензії GNU\n"
"\n"
"Використання: \n"

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr " --help                - вивести цю довідку     \n"

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""
" --id <id_label>       - завантажити сторінку довідки html, яка відповідає "
"id_label\n"

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""
" --doc <link>          - посилання на іншу сторінку web ( для інтерфейсу "
"привітання WM)\n"

#: standalone/drakhelp:35
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""
"%s не може бути виведено на дисплей \n"
". Немає пункту Довідка цього типу\n"

#: standalone/drakhelp:41
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""
"У Вашій системі не встановлено жодного переглядача. Будь-ласка, встановіть "
"його, якщо хочете користуватися довідкою"

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr "Системні встановлення"

#: standalone/drakperm:22
#, c-format
msgid "Custom settings"
msgstr "Типові встановлення"

#: standalone/drakperm:23
#, c-format
msgid "Custom & system settings"
msgstr "Типові і системні встановлення"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "Виправний"

#: standalone/drakperm:48 standalone/drakperm:314
#, c-format
msgid "Path"
msgstr "Шлях"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Користувач"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Група"

#: standalone/drakperm:48 standalone/drakperm:326
#, c-format
msgid "Permissions"
msgstr "Права доступу"

#: standalone/drakperm:107
#, fuzzy, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm використовується для перегляду файлів з метою встановлення\n"
"прав доступу, власників і груп з допомогою msec.\n"
"Ви також можете виправити свої правила, які перезапишуть поточні."

#: standalone/drakperm:110
#, fuzzy, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""
"Поточний рівень безпеки - %s\n"
"Виберіть права доступу для перегляду/редактування"

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr "Вверх"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr "Перемістити вибране правило на один рівень уверх"

#: standalone/drakperm:122
#, c-format
msgid "Down"
msgstr "Вниз"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr "Перемістити вибране правило на один рівень вниз"

#: standalone/drakperm:123
#, c-format
msgid "Add a rule"
msgstr "Додати правило"

#: standalone/drakperm:123
#, c-format
msgid "Add a new rule at the end"
msgstr "Додати нове правило в кінець"

#: standalone/drakperm:124
#, c-format
msgid "Delete selected rule"
msgstr "Видалити вибране правило"

#: standalone/drakperm:125 standalone/drakups:281 standalone/drakups:330
#: standalone/drakups:350 standalone/drakvpn:331 standalone/drakvpn:692
#: standalone/printerdrake:229
#, c-format
msgid "Edit"
msgstr "Виправити"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr "Виправити поточне правило"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "переглянути"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Читати"

#: standalone/drakperm:253
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr "Увімкнути \"%s\", щоб читати файл"

#: standalone/drakperm:256
#, c-format
msgid "Write"
msgstr "Записати"

#: standalone/drakperm:257
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "Виберіть \"%s\" для запису у файл"

#: standalone/drakperm:260
#, c-format
msgid "Execute"
msgstr "Виконати"

#: standalone/drakperm:261
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "Вибрати \"%s\" для виконання файла"

#: standalone/drakperm:263
#, c-format
msgid "Sticky-bit"
msgstr "Закріплюючий біт"

#: standalone/drakperm:263
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Використовується текою:\n"
"тільки власник теки або файл з неї може його видалити"

#: standalone/drakperm:264
#, c-format
msgid "Set-UID"
msgstr "Встановити код користувача (КК)"

#: standalone/drakperm:264
#, c-format
msgid "Use owner id for execution"
msgstr "Використовувати id власника для виконання"

#: standalone/drakperm:265
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:265
#, c-format
msgid "Use group id for execution"
msgstr "Використовувати код групи для виконання"

#: standalone/drakperm:283
#, c-format
msgid "User :"
msgstr "Користувач :"

#: standalone/drakperm:285
#, c-format
msgid "Group :"
msgstr "Група :"

#: standalone/drakperm:289
#, c-format
msgid "Current user"
msgstr "Поточний користувач"

#: standalone/drakperm:290
#, c-format
msgid "When checked, owner and group won't be changed"
msgstr "Коли вибрано, власника і групу неможливо буде змінити"

#: standalone/drakperm:300
#, c-format
msgid "Path selection"
msgstr "Вибір шляху"

#: standalone/drakperm:320
#, c-format
msgid "Property"
msgstr "Властивість"

#: standalone/drakpxe:55
#, c-format
msgid "PXE Server Configuration"
msgstr "Налаштування сервера PXE"

#: standalone/drakpxe:111
#, c-format
msgid "Installation Server Configuration"
msgstr "Конфігурація сервера встановлення"

#: standalone/drakpxe:112
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Ви налаштовуєте Ваш комп'ютер для встановлення сервера PXE, як і DHCP\n"
"сервера і сервера TFTP, щоб створити інсталяційний сервер.\n"
"З цією можливістю можна здійснювати встановлення на інші комп'ютери\n"
"місцевої мережі, використовуючи цей як джерело.\n"
"\n"
"Перед тим, як робити щось далі, переконайтеся, що Ви налаштували доступ до "
"мережі/інтернету.\n"
"\n"
"Примітка: Вам потрібно мати плату мережі, щоб налаштувати\n"
"місцеву мережу (LAN)."

#: standalone/drakpxe:143
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
"Будь-ласка, вкажіть, який інтерфейс мережі буде використовуватися для "
"сервера dhcp."

#: standalone/drakpxe:144
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Інтерфейс %s (в мережі %s)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"Сервер DHCP дозволить іншому комп'ютеру завантажитися з допомогою PXE в "
"заданому діапазоні адрес.\n"
"\n"
"Мережева адреса - %s, маска мережі %s.\n"
"\n"

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr "Стартова IP-адреса DHCP"

#: standalone/drakpxe:174
#, c-format
msgid "The DHCP end ip"
msgstr "Кінцева IP-адреса DHCP"

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Будь-ласка, вкажіть, де буде доступний образ встановлення.\n"
"\n"
"Якщо Ви не маєте існуючої теки, скопіюйте вміст CD або DVD.\n"
"\n"

#: standalone/drakpxe:192
#, c-format
msgid "Installation image directory"
msgstr "Тека з образом для встановлення"

#: standalone/drakpxe:196
#, c-format
msgid "No image found"
msgstr "Образу не знайдено"

#: standalone/drakpxe:197
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Не знайдено образів CD або DVD, будь-ласка, скопіюйте програму встановлення "
"і файли rpm."

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"Будь-ласка, зауважте, де розміщений файл auto_install.cfg.\n"
"\n"
"Залиште його порожнім, якщо Ви не хочете задавати режиму\n"
"автоматичного встановлення.\n"

#: standalone/drakpxe:215
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Розташування файла auto_install.cfg"

#: standalone/draksec:44
#, c-format
msgid "ALL"
msgstr "ВСІ"

#: standalone/draksec:44
#, c-format
msgid "LOCAL"
msgstr "МІСЦЕВИЙ"

#: standalone/draksec:44 standalone/drakvpn:1144
#, c-format
msgid "default"
msgstr "стандартний"

#: standalone/draksec:44
#, c-format
msgid "ignore"
msgstr "ігнорувати"

#: standalone/draksec:44
#, c-format
msgid "no"
msgstr "ні"

#: standalone/draksec:44
#, c-format
msgid "yes"
msgstr "так"

#: standalone/draksec:81
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu allows you to select one of the six preconfigured "
"security levels\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""
"Тут Ви можете встановити рівень безпеки і адміністратора Вашої машини.\n"
"\n"
"\n"
"Адміністратор безпеки є єдиним, хто отримуватиме попередження безпеки,\n"
"якщо встановлено параметр 'Попередження безпеки'. Він може бути іменем\n"
"користувача або електронною адресою.\n"
"\n"
"\n"
"Меню Рівень безпеки дає змогу вибрати один із шести попередньо\n"
"налаштованих рівнів, які забезпечуються msec. Вони охоплюють діапазон\n"
"від дуже низького і легкого у використанні рівня безпеки до "
"параноїдального,\n"
"який використовується для дуже чутливих серверних задач:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\"> Дуже низький</span>: практично не захищає,\n"
"але дуже легкий у використанні. Повинен використовуватися у машинах,\n"
"не під'єднаних до мереж і недоступних для інших.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\"> Стандартний</span>: Це стандартний рівень\n"
"безпеки, який рекомендується для комп'ютера, який буде під'єднано до\n"
"мережі Інтернет як клієнта.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\"> Високий</span>: Використовуються деякі\n"
"обмеження, кожної ночі виконуються автоматичні перевірки.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\"> Найвищий</span>: Рвіень безпеки достатньо\n"
"високий, щоб використовувати систему в якості сервера, який має\n"
"з'єднання з багатьма клієнтами. Якщо Ваша машина є тільки клієнтом\n"
"мережі Інтернет, можете вибрати нижчий рівень.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\"> Параноїдальний</span>: Подібний до\n"
"попереднього рівня, але система є закритою і параметри безпеки\n"
"виставлені по максимуму."

#: standalone/draksec:129
#, c-format
msgid "(default value: %s)"
msgstr "(типове значення: %s)"

#: standalone/draksec:170
#, c-format
msgid "Security Level:"
msgstr "Рівень безпеки:"

#: standalone/draksec:173
#, c-format
msgid "Security Alerts:"
msgstr "Попередження безпеки:"

#: standalone/draksec:177
#, c-format
msgid "Security Administrator:"
msgstr "Адміністротар з безпеки:"

#: standalone/draksec:179
#, c-format
msgid "Basic options"
msgstr "Основні параметри"

#: standalone/draksec:192
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"Наступні параметри можуть бути встановлені для налаштування\n"
"Вашої системи безпеки. Якщо Вам потрібне пояснення, дивіться\n"
"контекстну довідку.\n"

#: standalone/draksec:194
#, c-format
msgid "Network Options"
msgstr "Параметри мережі"

#: standalone/draksec:194
#, c-format
msgid "System Options"
msgstr "Параметри системи"

#: standalone/draksec:240
#, c-format
msgid "Periodic Checks"
msgstr "Періодичні перевірки"

#: standalone/draksec:258
#, c-format
msgid "Please wait, setting security level..."
msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..."

#: standalone/draksec:264
#, c-format
msgid "Please wait, setting security options..."
msgstr "Зачекайте, будь-ласка, встановлюются параметри безпеки..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "Звукової карти не знайдено!"

#: standalone/draksound:48
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"На Вашій машині не знайдено звукових плат. Будь-ласка, перевірте, щоб "
"звукова карта, що підтримується Лінаксом, була правильно вставлена.\n"
"\n"
"\n"
"Ви можете відвідати нашу базу даних обладнання на:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/ru/hardware.php3"

#: standalone/draksound:55
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Зауважте: якщо у Вас є звукова карта PnP, Вам буде потрібно використати "
"програму sndconfig. Просто наберіть в консолі \"sndconfig\"."

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"для завершення налаштування потрібний пакунок 'ImageMagick'.\n"
"Натисніть \"ОК\" для встановлення 'ImageMagick' або \"Скасувати\" для виходу"

#: standalone/draksplash:68
#, c-format
msgid "first step creation"
msgstr "перший крок створення"

#: standalone/draksplash:71
#, c-format
msgid "final resolution"
msgstr "кінцева роздільна здатність"

#: standalone/draksplash:72
#, c-format
msgid "choose image file"
msgstr "виберіть файл образу"

#: standalone/draksplash:73
#, c-format
msgid "Theme name"
msgstr "Назва теми"

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "Перейти"

#: standalone/draksplash:93 standalone/draksplash:158
#, c-format
msgid "Configure bootsplash picture"
msgstr "Налаштувати рисунок bootsplash"

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""
"координата x текстового вікна\n"
"в кількості символів"

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"Координата y текстового вікна\n"
"в кількостях символів"

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr "ширина тексту"

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr "висота текстового вікна"

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"координата x верхнього лівого\n"
"кута індикатора поступу"

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"координата y верхнього лівого\n"
"кута індикатора поступу"

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr "ширина індикатора поступу"

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr "висота індикатора поступу"

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr "колір індикатора поступу"

#: standalone/draksplash:119
#, c-format
msgid "Preview"
msgstr "Перегляд"

#: standalone/draksplash:121
#, c-format
msgid "Save theme"
msgstr "Зберегти тему"

#: standalone/draksplash:122
#, c-format
msgid "Choose color"
msgstr "Вибрати колір"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr "Показувати логотип в консолі"

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr "Зробити повідомлення ядра невидимими типово"

#: standalone/draksplash:161 standalone/draksplash:319
#: standalone/draksplash:462
#, c-format
msgid "Notice"
msgstr "Повідомлення"

#: standalone/draksplash:161 standalone/draksplash:319
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "Ця тема ще не має bootsplash в %s !"

#: standalone/draksplash:167
#, c-format
msgid "choose image"
msgstr "виберіть образ"

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr "зберігається тема Bootsplash..."

#: standalone/draksplash:443
#, c-format
msgid "ProgressBar color selection"
msgstr "Вибір кольору індикатора поступу"

#: standalone/draksplash:462
#, c-format
msgid "You must choose an image file first!"
msgstr "Спочатку Вам потрібно вибрати файл образу!"

#: standalone/draksplash:467
#, c-format
msgid "Generating preview ..."
msgstr "Готується перегляд..."

#: standalone/draksplash:512
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "Попередній перегляд Bootsplash %s (%s)"

#: standalone/drakups:63
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:69
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "Додати пункт"

#: standalone/drakups:72
#, fuzzy, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll be add a new UPS to your system.\n"
msgstr ""
"Ласкаво просимо до конфіґураційної програми для пошти.\n"
"\n"
"Тут Ви можете встановити систему оповіщення.\n"

#: standalone/drakups:79
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you prefer autodetect UPS devices connected to this machine or  ?"
msgstr ""

#: standalone/drakups:82
#, fuzzy, c-format
msgid "Autodetection"
msgstr "Користуватися автовизначенням"

#: standalone/drakups:90 standalone/harddrake2:134
#, c-format
msgid "Detection in progress"
msgstr "Триває автовизначення"

#: standalone/drakups:108 standalone/drakups:144 standalone/logdrake:479
#: standalone/logdrake:485
#, fuzzy, c-format
msgid "Congratulations"
msgstr "Вітання!"

#: standalone/drakups:109
#, fuzzy, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr "Майстер успішно відключив нагадування про пошту."

#: standalone/drakups:111
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "Пристроїв не знайдено"

#: standalone/drakups:116 standalone/drakups:128
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "Налаштування друкарки CUPS"

#: standalone/drakups:116
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "Випробуйте мишу, будь-ласка:"

#: standalone/drakups:117
#, fuzzy, c-format
msgid "Manufacturer / Model:"
msgstr "Виробник друкарки, модель"

#: standalone/drakups:128
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:133
#, c-format
msgid "Name:"
msgstr "Назва:"

#: standalone/drakups:133
#, fuzzy, c-format
msgid "The name of your ups"
msgstr "назва CPU"

#: standalone/drakups:134
#, c-format
msgid "The driver that manage your ups"
msgstr ""

#: standalone/drakups:135
#, fuzzy, c-format
msgid "Port:"
msgstr "Порт"

#: standalone/drakups:137
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "тип шини, до якої під'єднано мишу"

#: standalone/drakups:144
#, fuzzy, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr "Майстер успішно налаштував попередження про пошту."

#: standalone/drakups:232
#, fuzzy, c-format
msgid "UPS devices"
msgstr "Сервіси"

#: standalone/drakups:233 standalone/drakups:251 standalone/drakups:266
#: standalone/harddrake2:63
#, c-format
msgid "Name"
msgstr "Назва"

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS users"
msgstr "Користувачі"

#: standalone/drakups:265
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "доступ до мережевих засобів"

#: standalone/drakups:266
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:277
#, fuzzy, c-format
msgid "Rules"
msgstr "Маршрутизатори:"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "Action"
msgstr "/Дії"

#: standalone/drakups:278 standalone/drakvpn:1144 standalone/harddrake2:57
#, c-format
msgid "Level"
msgstr "Рівень"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "ACL name"
msgstr "Назва LVM?"

#: standalone/drakups:297 standalone/drakups:301 standalone/drakups:310
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Дворака (США)"

#: standalone/drakups:307
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Тестування конфіґурації"

#: standalone/drakvpn:71
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Дворака (США)"

#: standalone/drakvpn:93
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "Доступ до користування з'єднанням з інтернетом увімкнено"

#: standalone/drakvpn:94
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do ?"
msgstr ""
"Установка спільного користування з'єднанням з інтернетом вже\n"
"зроблена. Спільне користування в даний момент дозволене.\n"
"\n"
"Що Ви бажаєте зробити?"

#: standalone/drakvpn:103
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "Заборона серверів..."

#: standalone/drakvpn:112
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "Спільне користування з'єднанням з інтернетом вимкнене."

#: standalone/drakvpn:119
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "Спільне користування з'єднанням з інтернетом вимкнене"

#: standalone/drakvpn:120
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do ?"
msgstr ""
"Встановлення доступу до з'єднання з інтернетом вже\n"
"було зроблене. Доступ в даний момент вимкнено.\n"
"\n"
"Що Ви бажаєте зробити?"

#: standalone/drakvpn:133
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr "Вмикаю сервери..."

#: standalone/drakvpn:139
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "Доступ до користування з'єднанням з інтернетом увімкнено"

#: standalone/drakvpn:153 standalone/drakvpn:181
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:154
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:182
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:194
#, fuzzy, c-format
msgid "Kernel module."
msgstr "Забрати модуль"

#: standalone/drakvpn:195
#, c-format
msgid ""
"The kernel need to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:290
#, fuzzy, c-format
msgid "Security Policies"
msgstr "Попередження безпеки:"

#: standalone/drakvpn:290
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:293 standalone/drakvpn:304
#, fuzzy, c-format
msgid "Configuration file"
msgstr "Конфіґурація"

#: standalone/drakvpn:294
#, c-format
msgid ""
"Configuration step !\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure ?\n"
msgstr ""

#: standalone/drakvpn:305
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:323 standalone/drakvpn:683
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s секторів"

#: standalone/drakvpn:324
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now :\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do ?\n"
msgstr ""

#: standalone/drakvpn:331 standalone/drakvpn:692
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "щоденно"

#: standalone/drakvpn:331 standalone/drakvpn:692
#, fuzzy, c-format
msgid "Commit"
msgstr "компактний"

#: standalone/drakvpn:345 standalone/drakvpn:349 standalone/drakvpn:707
#: standalone/drakvpn:711
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "Конфіґурація мережі"

#: standalone/drakvpn:350
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:366
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:367
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton :\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:374
#, fuzzy, c-format
msgid "config setup"
msgstr "переналаштувати"

#: standalone/drakvpn:374
#, fuzzy, c-format
msgid "conn %default"
msgstr "стандартний"

#: standalone/drakvpn:374
#, fuzzy, c-format
msgid "normal conn"
msgstr "Нормальний режим"

#: standalone/drakvpn:380 standalone/drakvpn:421 standalone/drakvpn:508
#, fuzzy, c-format
msgid "Exists !"
msgstr "Вийти"

#: standalone/drakvpn:381 standalone/drakvpn:422
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:398
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:403
#, fuzzy, c-format
msgid "interfaces"
msgstr "Інтерфейс"

#: standalone/drakvpn:404
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:405
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:406
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:442
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If don't define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:449
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:450
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:451
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:452
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:453 standalone/drakvpn:492
#, fuzzy, c-format
msgid "left"
msgstr "Видалити"

#: standalone/drakvpn:454 standalone/drakvpn:493
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:455 standalone/drakvpn:494
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:456 standalone/drakvpn:495
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:457 standalone/drakvpn:496
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:486
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:489
#, fuzzy, c-format
msgid "section name"
msgstr "Назва зв'язку"

#: standalone/drakvpn:490
#, fuzzy, c-format
msgid "authby"
msgstr "Шлях"

#: standalone/drakvpn:491
#, fuzzy, c-format
msgid "auto"
msgstr "Про"

#: standalone/drakvpn:497
#, fuzzy, c-format
msgid "right"
msgstr "Високий"

#: standalone/drakvpn:498
#, fuzzy, c-format
msgid "rightcert"
msgstr "Підвищений"

#: standalone/drakvpn:499
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:500
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:501
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:509
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:541
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:574 standalone/drakvpn:824
#, fuzzy, c-format
msgid "Edit section"
msgstr "Вибір шляху"

#: standalone/drakvpn:575
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:578 standalone/drakvpn:658 standalone/drakvpn:829
#: standalone/drakvpn:875
#, fuzzy, c-format
msgid "Section names"
msgstr "Назва зв'язку"

#: standalone/drakvpn:588
#, fuzzy, c-format
msgid "Can't edit !"
msgstr "Не можу відкрити %s!"

#: standalone/drakvpn:589
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the oportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:598
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:609
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:622
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:643
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:654 standalone/drakvpn:871
#, fuzzy, c-format
msgid "Remove section"
msgstr "Видалити список"

#: standalone/drakvpn:655 standalone/drakvpn:872
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:684
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now :\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:712
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:726
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:727
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton :\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:733
#, fuzzy, c-format
msgid "path"
msgstr "Шлях"

#: standalone/drakvpn:733
#, fuzzy, c-format
msgid "remote"
msgstr "Видалити"

#: standalone/drakvpn:733
#, fuzzy, c-format
msgid "sainfo"
msgstr "Іспанська"

#: standalone/drakvpn:741
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:744
#, fuzzy, c-format
msgid "path type"
msgstr "Змінити тип"

#: standalone/drakvpn:748
#, c-format
msgid ""
"path include path : specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file : specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path : racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion : include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File : Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:768 standalone/drakvpn:861
#, fuzzy, c-format
msgid "real file"
msgstr "Виберіть файл"

#: standalone/drakvpn:791
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:808
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:825
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:836
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:845
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:853
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:860
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:901
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:921
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:922
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:939
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Європейський протокол"

#: standalone/drakvpn:940
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:954
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:955
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:972
#, fuzzy, c-format
msgid "Sainfo destination protocol"
msgstr "Інструмент Windows Migration"

#: standalone/drakvpn:973
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:987
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:994
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "число"

#: standalone/drakvpn:995
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1011
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour ;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1029 standalone/drakvpn:1114
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "розпізнавання"

#: standalone/drakvpn:1031
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "розпізнавання"

#: standalone/drakvpn:1033
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1034
#, fuzzy, c-format
msgid "deflate"
msgstr "стандартний"

#: standalone/drakvpn:1041
#, fuzzy, c-format
msgid "Remote"
msgstr "Видалити"

#: standalone/drakvpn:1042
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples : \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1050
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "Режим зв'язку через модем"

#: standalone/drakvpn:1052
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1058
#, fuzzy, c-format
msgid "Generate policy"
msgstr "Безпека"

#: standalone/drakvpn:1059 standalone/drakvpn:1075 standalone/drakvpn:1088
#, c-format
msgid "off"
msgstr ""

#: standalone/drakvpn:1059 standalone/drakvpn:1075 standalone/drakvpn:1088
#, fuzzy, c-format
msgid "on"
msgstr "Вниз"

#: standalone/drakvpn:1060
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1074
#, fuzzy, c-format
msgid "Passive"
msgstr "Палестина"

#: standalone/drakvpn:1076
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1081
#, fuzzy, c-format
msgid "My certfile"
msgstr "Виберіть файл"

#: standalone/drakvpn:1082
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "Назва друкарки"

#: standalone/drakvpn:1083
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1084
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "Назва друкарки"

#: standalone/drakvpn:1085
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "Виберіть файл"

#: standalone/drakvpn:1086
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1087
#, fuzzy, c-format
msgid "Verify cert"
msgstr "дуже гарний"

#: standalone/drakvpn:1089
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1091
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1092
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, fqdn,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier fqdn string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples : \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1112
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "Друкарка"

#: standalone/drakvpn:1113
#, fuzzy, c-format
msgid "Proposal"
msgstr "Протокол"

#: standalone/drakvpn:1115
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of following: \n"
"\n"
"des, 3des, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1122
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1123
#, fuzzy, c-format
msgid "Authentication method"
msgstr "розпізнавання"

#: standalone/drakvpn:1124
#, fuzzy, c-format
msgid "DH group"
msgstr "Група"

#: standalone/drakvpn:1131
#, fuzzy, c-format
msgid "Command"
msgstr "Командний рядок"

#: standalone/drakvpn:1132
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1133
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1134
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Європейський протокол"

#: standalone/drakvpn:1134 standalone/drakvpn:1141
#, fuzzy, c-format
msgid "any"
msgstr "День"

#: standalone/drakvpn:1136
#, fuzzy, c-format
msgid "Flag"
msgstr "Прапорці"

#: standalone/drakvpn:1137
#, fuzzy, c-format
msgid "Direction"
msgstr "Опис"

#: standalone/drakvpn:1138
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1138
#, fuzzy, c-format
msgid "ipsec"
msgstr "Msec"

#: standalone/drakvpn:1138
#, fuzzy, c-format
msgid "discard"
msgstr "відімкнено"

#: standalone/drakvpn:1141
#, fuzzy, c-format
msgid "Mode"
msgstr "Модель"

#: standalone/drakvpn:1141
#, fuzzy, c-format
msgid "tunnel"
msgstr "Канал"

#: standalone/drakvpn:1141
#, fuzzy, c-format
msgid "transport"
msgstr "передано"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Робоча станція"

#: standalone/drakvpn:1144
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1144
#, fuzzy, c-format
msgid "use"
msgstr "Миша"

#: standalone/drakvpn:1144
#, fuzzy, c-format
msgid "unique"
msgstr "Мартініка"

#: standalone/drakxtv:46
#, c-format
msgid "USA (broadcast)"
msgstr "США (широке мовлення)"

#: standalone/drakxtv:46
#, c-format
msgid "USA (cable)"
msgstr "США (кабель)"

#: standalone/drakxtv:46
#, c-format
msgid "USA (cable-hrc)"
msgstr "США (cable-hrc)"

#: standalone/drakxtv:46
#, c-format
msgid "Canada (cable)"
msgstr "Канадська (кабель)"

#: standalone/drakxtv:47
#, c-format
msgid "Japan (broadcast)"
msgstr "Японія (широке мовлення)"

#: standalone/drakxtv:47
#, c-format
msgid "Japan (cable)"
msgstr "Японія (кабель)"

#: standalone/drakxtv:47
#, c-format
msgid "China (broadcast)"
msgstr "Китай"

#: standalone/drakxtv:48
#, c-format
msgid "West Europe"
msgstr "Західна Європа"

#: standalone/drakxtv:48
#, c-format
msgid "East Europe"
msgstr "Східна Європа"

#: standalone/drakxtv:48
#, c-format
msgid "France [SECAM]"
msgstr "Франція [SECAM]"

#: standalone/drakxtv:49
#, c-format
msgid "Newzealand"
msgstr "Нова Зеландія"

#: standalone/drakxtv:52
#, c-format
msgid "Australian Optus cable TV"
msgstr "Австралійське кабельне ТБ Optus"

#: standalone/drakxtv:84
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Будь-ласка,\n"
"введіть свій формат ТБ і країну"

#: standalone/drakxtv:86
#, c-format
msgid "TV norm:"
msgstr "Формат ТБ:"

#: standalone/drakxtv:87
#, c-format
msgid "Area:"
msgstr "Територія:"

#: standalone/drakxtv:91
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "Триває сканування каналів TV ..."

#: standalone/drakxtv:101
#, c-format
msgid "Scanning for TV channels"
msgstr "Пошук каналів ТБ"

#: standalone/drakxtv:105
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Сталася помилка під час сканування ТБ-каналів"

#: standalone/drakxtv:106
#, c-format
msgid "XawTV isn't installed!"
msgstr "XawTV не встановлено!"

#: standalone/drakxtv:109
#, c-format
msgid "Have a nice day!"
msgstr "Всього найкращого!"

#: standalone/drakxtv:110
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Тепер Ви можете запустити xawtv (в X Window!)!\n"

#: standalone/drakxtv:131
#, c-format
msgid "No TV Card detected!"
msgstr "Не знайдено карт ТБ!"

#: standalone/drakxtv:132
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"На Вашій машині не виявлено ТБ-карт. Будь-ласка, перевірте, чи Linux-сумісну "
"Відео/ТБ-карту було правильно вставлено.\n"
"\n"
"\n"
"Ви можете відвідати нашу базу даних обладнання на:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/harddrake2:18
#, c-format
msgid "Alternative drivers"
msgstr "Альтернативні драйвери"

#: standalone/harddrake2:19
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "список альтернативних драйверів для цієї звукової карти"

#: standalone/harddrake2:22
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "це фізична шина, до якої приєднано пристрій (напр: PCI, USB, ...)"

#: standalone/harddrake2:23
#, c-format
msgid "Channel"
msgstr "Канал"

#: standalone/harddrake2:23
#, c-format
msgid "EIDE/SCSI channel"
msgstr "Канал EIDE/SCSI"

#: standalone/harddrake2:24
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:24
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"ядро GNU/Linux потребує запуску під час завантаження обчислювального циклу, "
"щоб ініціалізувати лічильник часу. Його результат зберігається як спосіб "
"оцінки продуктивності процесора."

#: standalone/harddrake2:26
#, c-format
msgid "Bus identification"
msgstr "Ідентифікація шини"

#: standalone/harddrake2:27
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- пристрої PCI і USB : тут перелічені PCI/USB ідентифікатори виробника, "
"пристрою, вторинних виробника і пристрою"

#: standalone/harddrake2:30
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- пристрої pci: це визначає PCI-слот, пристрій і призначення карти\n"
"- пристрої eide: пристрій є або вторинним, або головним\n"
"- пристрої scsi: ідентифікатори шини і пристрою scsi"

#: standalone/harddrake2:33
#, c-format
msgid "Cache size"
msgstr "Розмір кешу"

#: standalone/harddrake2:33
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "розмір кешу процесора другого рівня"

#: standalone/harddrake2:34
#, c-format
msgid "Drive capacity"
msgstr "Ємніть диску"

#: standalone/harddrake2:34
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
"спеціальні можливості драйвера (можливість записування і/чи підтримка DVD)"

#: standalone/harddrake2:36
#, c-format
msgid "Coma bug"
msgstr "Coma bug"

#: standalone/harddrake2:36
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "якщо цей процесор має помилку Cyrix 6x86 Coma"

#: standalone/harddrake2:37
#, c-format
msgid "Cpuid family"
msgstr "Сімейство cpu"

#: standalone/harddrake2:37
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "сімейство cpu (напр. 6 для класу i686)"

#: standalone/harddrake2:38
#, c-format
msgid "Cpuid level"
msgstr "Рівень cpuid"

#: standalone/harddrake2:38
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "інформаційний рівень, який може бути досягнутий інструкцією cpuid"

#: standalone/harddrake2:39
#, c-format
msgid "Frequency (MHz)"
msgstr "Частота (МГц)"

#: standalone/harddrake2:39
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"частота процесора в МГц (мегагерцах, які в першому наближенні можуть бути "
"наближено порівняні з числом інструкцій, які процесор може виконати за одну "
"секунду)"

#: standalone/harddrake2:40
#, c-format
msgid "this field describes the device"
msgstr "це поле описує пристрій"

#: standalone/harddrake2:41
#, c-format
msgid "Old device file"
msgstr "Старий файл пристрою"

#: standalone/harddrake2:42
#, c-format
msgid "old static device name used in dev package"
msgstr "в пакунку dev використовується назва старого статичного пристрою"

#: standalone/harddrake2:43
#, c-format
msgid "New devfs device"
msgstr "Новий пристрій devfs"

#: standalone/harddrake2:44
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "нова назва динамічного пристрою, згенерована ядром devfs"

#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "Модуль"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "модуль в ядрі GNU/Linux, який керує пристроєм"

#: standalone/harddrake2:47
#, c-format
msgid "Flags"
msgstr "Прапорці"

#: standalone/harddrake2:47
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "Прапорці CPU, повідомлені ядром"

#: standalone/harddrake2:48
#, c-format
msgid "Fdiv bug"
msgstr "Помилка Fdiv"

#: standalone/harddrake2:49
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Перші чіпи Intel Pentium мали помилку в математичному співпроцесорі, яка не "
"забезпечувала необхідної точності при діленні з плаваючою крапкою (FDIV)"

#: standalone/harddrake2:50
#, c-format
msgid "Is FPU present"
msgstr "Чи є FPU"

#: standalone/harddrake2:50
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "'так' означає, що процесор має арифметичного співпроцесора"

#: standalone/harddrake2:51
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Чи має FPU вектор irq"

#: standalone/harddrake2:51
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
"так означає, що арифметичний співпроцесор має вмонтований вектор виняткових "
"операцій"

#: standalone/harddrake2:52
#, c-format
msgid "F00f bug"
msgstr "Помилка F00f"

#: standalone/harddrake2:52
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr "ранні пентіуми мали помилку і зависали при декодуванні F00F"

#: standalone/harddrake2:53
#, c-format
msgid "Halt bug"
msgstr "Помилка зупину"

#: standalone/harddrake2:54
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Деякі з ранніх чіпів i486DX-100 не могли точно повертатися в робочий режим "
"після використання інструкції \"halt\""

#: standalone/harddrake2:56
#, c-format
msgid "Floppy format"
msgstr "Форматувати дискету"

#: standalone/harddrake2:56
#, c-format
msgid "format of floppies supported by the drive"
msgstr "формати дискет, які підтримуються дисководом"

#: standalone/harddrake2:57
#, c-format
msgid "sub generation of the cpu"
msgstr "покоління процесора"

#: standalone/harddrake2:58
#, c-format
msgid "class of hardware device"
msgstr "клас пристрою"

#: standalone/harddrake2:59 standalone/harddrake2:60
#: standalone/printerdrake:212
#, c-format
msgid "Model"
msgstr "Модель"

#: standalone/harddrake2:59
#, c-format
msgid "hard disk model"
msgstr "модель твердого диску"

#: standalone/harddrake2:60
#, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "покоління процесора (напр. 8 для PentiumIII, ...)"

#: standalone/harddrake2:61
#, c-format
msgid "Model name"
msgstr "Назва моделі"

#: standalone/harddrake2:61
#, c-format
msgid "official vendor name of the cpu"
msgstr "офіційна назва виробника процесора"

#: standalone/harddrake2:62
#, c-format
msgid "Number of buttons"
msgstr "Кількість кнопок"

#: standalone/harddrake2:62
#, c-format
msgid "the number of buttons the mouse has"
msgstr "кількість кнопок миші"

#: standalone/harddrake2:63
#, c-format
msgid "the name of the CPU"
msgstr "назва CPU"

#: standalone/harddrake2:64
#, c-format
msgid "network printer port"
msgstr "мережевий порт друкарки"

#: standalone/harddrake2:65
#, c-format
msgid "Processor ID"
msgstr "ID процесора"

#: standalone/harddrake2:65
#, c-format
msgid "the number of the processor"
msgstr "номер процесора"

#: standalone/harddrake2:66
#, c-format
msgid "Model stepping"
msgstr "Покращення моделі"

#: standalone/harddrake2:66
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "версія процесора (номер (покоління) моделі)"

#: standalone/harddrake2:67
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "тип шини, до якої під'єднано мишу"

#: standalone/harddrake2:68
#, c-format
msgid "the vendor name of the device"
msgstr "назва виробника прострою"

#: standalone/harddrake2:69
#, c-format
msgid "the vendor name of the processor"
msgstr "назва виробника процесора"

#: standalone/harddrake2:70
#, c-format
msgid "Write protection"
msgstr "Захист від запису"

#: standalone/harddrake2:70
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""
"прапорець WP регістра CR0 процесора встановлює захист від запису на рівень "
"сторінки пам'яті, таким чином, процесором вмикається захист неперевіреного "
"доступу з ядра до пам'яті користувача (отже, це захист від багів)"

#: standalone/harddrake2:84 standalone/logdrake:78 standalone/printerdrake:146
#: standalone/printerdrake:159
#, c-format
msgid "/_Options"
msgstr "/Параметри"

#: standalone/harddrake2:85 standalone/harddrake2:106 standalone/logdrake:80
#: standalone/printerdrake:171 standalone/printerdrake:172
#: standalone/printerdrake:173 standalone/printerdrake:174
#, c-format
msgid "/_Help"
msgstr "/Довідка"

#: standalone/harddrake2:89
#, c-format
msgid "/Autodetect _printers"
msgstr "/Користуватися автовизначенням друкарок"

#: standalone/harddrake2:90
#, c-format
msgid "/Autodetect _modems"
msgstr "/Автовизначення модемів"

#: standalone/harddrake2:91
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Автоматично визначати драйвери jaz"

#: standalone/harddrake2:98 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/Вийти"

#: standalone/harddrake2:107
#, c-format
msgid "/_Fields description"
msgstr "/Описи полів"

#: standalone/harddrake2:109
#, c-format
msgid "Harddrake help"
msgstr "Довідка HardDrake"

#: standalone/harddrake2:110
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Опис полів:\n"
"\n"

#: standalone/harddrake2:115
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"Після того, як Ви вибрали пристрій, Ви зможете побачити інформацію про нього "
"в полях, що відображаються у правому вікні (\"Інформація\")"

#: standalone/harddrake2:120 standalone/printerdrake:173
#, c-format
msgid "/_Report Bug"
msgstr "/_R Повідомити про помилку"

#: standalone/harddrake2:121 standalone/printerdrake:174
#, c-format
msgid "/_About..."
msgstr "/Про..."

#: standalone/harddrake2:122
#, c-format
msgid "About Harddrake"
msgstr "Про Harddrake"

#: standalone/harddrake2:124
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"Це HardDrake, інструмент налаштування заліза від .\n"
"<span foreground=\"royalblue3\">Версія:</span> %s\n"
"<span foreground=\"royalblue3\">Автор:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"

#: standalone/harddrake2:141
#, c-format
msgid "Harddrake2 version %s"
msgstr "Harddrake2 версії %s"

#: standalone/harddrake2:157
#, c-format
msgid "Detected hardware"
msgstr "Знайдене залізо"

#: standalone/harddrake2:162
#, c-format
msgid "Configure module"
msgstr "Сконфігурувати модуль"

#: standalone/harddrake2:169
#, c-format
msgid "Run config tool"
msgstr "Запустити інструмент налаштування"

#: standalone/harddrake2:216
#, c-format
msgid "unknown"
msgstr "невідома"

#: standalone/harddrake2:217
#, c-format
msgid "Unknown"
msgstr "Невідомий"

#: standalone/harddrake2:235
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""
"Клацніть на пристрої в лівому дереві, щоб тут побачити інформацію про нього."

#: standalone/harddrake2:286
#, c-format
msgid "secondary"
msgstr "вторинний"

#: standalone/harddrake2:286
#, c-format
msgid "primary"
msgstr "первинний"

#: standalone/harddrake2:294
#, c-format
msgid "burner"
msgstr "записувач"

#: standalone/harddrake2:294
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/keyboarddrake:24
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Будь-ласка, виберіть мапу клавіатури."

#: standalone/keyboarddrake:33
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Ви хочете, щоб BackSpace повертав Delete на консолі?"

#: standalone/localedrake:60
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""
"Зміни зроблено, але щоб вони вступили в дію, Вам потрібно перезареєструватися"

#: standalone/logdrake:51
#, fuzzy, c-format
msgid "Mandrake Tools Logs"
msgstr "Пояснення інструментів Мандрейк"

#: standalone/logdrake:52
#, fuzzy, c-format
msgid "Logdrake"
msgstr "logdrake"

#: standalone/logdrake:65
#, c-format
msgid "Show only for the selected day"
msgstr "Показувати лише для виділеного дня"

#: standalone/logdrake:72
#, c-format
msgid "/File/_New"
msgstr "/Файл/Новий"

#: standalone/logdrake:72
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Open"
msgstr "/Файл/_Відкрити"

#: standalone/logdrake:73
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:74
#, c-format
msgid "/File/_Save"
msgstr "/Файл/Записати"

#: standalone/logdrake:74
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:75
#, c-format
msgid "/File/Save _As"
msgstr "/Файл/Записати, як"

#: standalone/logdrake:76
#, c-format
msgid "/File/-"
msgstr "/Файл/-"

#: standalone/logdrake:79
#, c-format
msgid "/Options/Test"
msgstr "/Параметри/Тест"

#: standalone/logdrake:81
#, c-format
msgid "/Help/_About..."
msgstr "/Довідка/Про..."

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:113
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:117
#, c-format
msgid "search"
msgstr "пошук"

#: standalone/logdrake:129
#, c-format
msgid "A tool to monitor your logs"
msgstr "Засіб доглядання Ваших журнальних файлів"

#: standalone/logdrake:130 standalone/net_monitor:85
#, c-format
msgid "Settings"
msgstr "Параметри"

#: standalone/logdrake:135
#, c-format
msgid "Matching"
msgstr "Співпадає"

#: standalone/logdrake:136
#, c-format
msgid "but not matching"
msgstr "але не відповідає"

#: standalone/logdrake:140
#, c-format
msgid "Choose file"
msgstr "Виберіть файл"

#: standalone/logdrake:149
#, c-format
msgid "Calendar"
msgstr "Календар"

#: standalone/logdrake:159
#, c-format
msgid "Content of the file"
msgstr "Зміст файла"

#: standalone/logdrake:163 standalone/logdrake:429
#, c-format
msgid "Mail alert"
msgstr "Поштове повідомлення"

#: standalone/logdrake:170
#, fuzzy, c-format
msgid "The alert wizard had unexpectly failled:"
msgstr "Майстер нагадування несподівано перервався:"

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "будь ласка, зачекайте, проходження файла: %s"

#: standalone/logdrake:406
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Сервер World Wide Web Apache"

#: standalone/logdrake:407
#, c-format
msgid "Domain Name Resolver"
msgstr "Розпізнавач назв домену"

#: standalone/logdrake:408
#, c-format
msgid "Ftp Server"
msgstr "Сервер Ftp"

#: standalone/logdrake:409
#, c-format
msgid "Postfix Mail Server"
msgstr "Поштовий сервер postfix"

#: standalone/logdrake:410
#, c-format
msgid "Samba Server"
msgstr "Сервер Samba"

#: standalone/logdrake:411
#, c-format
msgid "SSH Server"
msgstr "Сервер SSH "

#: standalone/logdrake:412
#, c-format
msgid "Webmin Service"
msgstr "Сервіс Webmin"

#: standalone/logdrake:413
#, c-format
msgid "Xinetd Service"
msgstr "Сервіс xinetd "

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "Налаштувати систему друку CUPS"

#: standalone/logdrake:425
#, fuzzy, c-format
msgid "Stop the mail alert system"
msgstr "Зупинити систему поштового нагадування"

#: standalone/logdrake:432
#, c-format
msgid "Mail alert configuration"
msgstr "Налаштування поштового оповіщення"

#: standalone/logdrake:433
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Ласкаво просимо до конфіґураційної програми для пошти.\n"
"\n"
"Тут Ви можете встановити систему оповіщення.\n"

#: standalone/logdrake:436
#, fuzzy, c-format
msgid "What do you want to do?"
msgstr "Де Ви хочете змонтувати пристрій %s?"

#: standalone/logdrake:443
#, fuzzy, c-format
msgid "Services settings"
msgstr "налаштування сервіса"

#: standalone/logdrake:444
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""
"Ви отримаєте повідомлення, якщо один з вибраних сервісів більше не "
"працюватиме"

#: standalone/logdrake:451
#, c-format
msgid "Load setting"
msgstr "Завантажити налаштування"

#: standalone/logdrake:452
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Ви отримаєте повідомлення, якщо завантаження вище за цю величину"

#: standalone/logdrake:453
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr "Завантаження"

#: standalone/logdrake:458
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "змінити конфігурацію"

#: standalone/logdrake:459
#, c-format
msgid "Please enter your email address below "
msgstr "Будь-ласка, введіть нижче Вашу електронну адресу"

#: standalone/logdrake:460
#, fuzzy, c-format
msgid "and enter the name (or the IP) of the SMTP server you whish to use"
msgstr ""
"Введіть IP-адресу і порт машини, друкарки якої Ви хочете використовувати."

#: standalone/logdrake:479
#, fuzzy, c-format
msgid "The wizard successfully configured the mail alert."
msgstr "Майстер успішно налаштував попередження про пошту."

#: standalone/logdrake:485
#, fuzzy, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr "Майстер успішно відключив нагадування про пошту."

#: standalone/logdrake:544
#, c-format
msgid "Save as.."
msgstr "Зберегти як.."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "Будь-ласка, виберіть тип миші."

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "Емулювати третю кнопку?"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "Тест миші"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "Випробуйте мишу, будь-ласка:"

#: standalone/net_monitor:51 standalone/net_monitor:56
#, c-format
msgid "Network Monitoring"
msgstr "Слідкування за мережею"

#: standalone/net_monitor:91
#, fuzzy, c-format
msgid "Global statistics"
msgstr "Статистика"

#: standalone/net_monitor:94
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:94
#, fuzzy, c-format
msgid "Average"
msgstr "середньо"

#: standalone/net_monitor:95
#, fuzzy, c-format
msgid ""
"Sending\n"
"speed:"
msgstr "Швидкість відсилання:"

#: standalone/net_monitor:96
#, fuzzy, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr "Швидкість отримування:"

#: standalone/net_monitor:99
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "Час з'єднання: "

#: standalone/net_monitor:121
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Зачекайте, будь ласка. Йде випробування з'єднання..."

#: standalone/net_monitor:149 standalone/net_monitor:162
#, c-format
msgid "Disconnecting from Internet "
msgstr "Виконується від'єднання від інтернету "

#: standalone/net_monitor:149 standalone/net_monitor:162
#, c-format
msgid "Connecting to Internet "
msgstr "Виконується з'єднання з інтернетом"

#: standalone/net_monitor:193
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Від'єднання від інтернету завершилося невдало."

#: standalone/net_monitor:194
#, c-format
msgid "Disconnection from Internet complete."
msgstr "Від'єднання від інтернету завершене."

#: standalone/net_monitor:196
#, c-format
msgid "Connection complete."
msgstr "З'єднання завершене."

#: standalone/net_monitor:197
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"З'єднання завершилося невдало.\n"
"Перевірте налаштування в Центрі керування Мандрейк."

#: standalone/net_monitor:295
#, c-format
msgid "Color configuration"
msgstr "Налаштування кольору"

#: standalone/net_monitor:343 standalone/net_monitor:363
#, c-format
msgid "sent: "
msgstr "відіслано: "

#: standalone/net_monitor:350 standalone/net_monitor:367
#, c-format
msgid "received: "
msgstr "отримано: "

#: standalone/net_monitor:357
#, c-format
msgid "average"
msgstr "середньо"

#: standalone/net_monitor:360
#, c-format
msgid "Local measure"
msgstr "Локальний показник"

#: standalone/net_monitor:392
#, c-format
msgid "transmitted"
msgstr "передано"

#: standalone/net_monitor:393
#, c-format
msgid "received"
msgstr "отримано"

#: standalone/net_monitor:411
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Попередження, виявлено інше з'єднання з інтернетом, можливо, воно "
"використовує Вашу мережу"

#: standalone/net_monitor:417
#, c-format
msgid "Disconnect %s"
msgstr "Від'єднати %s"

#: standalone/net_monitor:417
#, c-format
msgid "Connect %s"
msgstr "Під'єднати %s"

#: standalone/net_monitor:422
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "Конфігурація з'єднання з інтернетом"

#: standalone/printerdrake:70
#, c-format
msgid "Loading printer configuration... Please wait"
msgstr "Завантажується конфігурація друкарки... Зачекайте, будь-ласка"

#: standalone/printerdrake:86
#, c-format
msgid "Reading data of installed printers..."
msgstr "Йде зчитування даних про встановлені друкарки..."

#: standalone/printerdrake:129
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "Керування друкарками \n"

#: standalone/printerdrake:143 standalone/printerdrake:144
#: standalone/printerdrake:145 standalone/printerdrake:153
#: standalone/printerdrake:154 standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/Дії"

#: standalone/printerdrake:143
#, c-format
msgid "/Set as _Default"
msgstr "/Встановити типовим"

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/Виправити"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/Вилучити"

#: standalone/printerdrake:146
#, c-format
msgid "/_Expert mode"
msgstr "/Експертний режим"

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/Поновити"

#: standalone/printerdrake:154
#, c-format
msgid "/_Add Printer"
msgstr "/Додати друкарку"

#: standalone/printerdrake:158
#, c-format
msgid "/_Configure CUPS"
msgstr "/Налаштувати CUPS"

#: standalone/printerdrake:191
#, c-format
msgid "Search:"
msgstr "Пошук:"

#: standalone/printerdrake:194
#, c-format
msgid "Apply filter"
msgstr "Застосувати фільтр"

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Def."
msgstr "Def."

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Printer Name"
msgstr "Назва друкарки"

#: standalone/printerdrake:212
#, c-format
msgid "Connection Type"
msgstr "Тип приєднання"

#: standalone/printerdrake:219
#, c-format
msgid "Server Name"
msgstr "Назва сервера"

#: standalone/printerdrake:225
#, c-format
msgid "Add Printer"
msgstr "Додати друкарку"

#: standalone/printerdrake:225
#, c-format
msgid "Add a new printer to the system"
msgstr "Додати нову друкарку до системи"

#: standalone/printerdrake:227
#, c-format
msgid "Set as default"
msgstr "Встановити типовим"

#: standalone/printerdrake:227
#, c-format
msgid "Set selected printer as the default printer"
msgstr "Встановити вибрану друкарку типовою"

#: standalone/printerdrake:229
#, c-format
msgid "Edit selected printer"
msgstr "Редактувати вибрану друкарку"

#: standalone/printerdrake:231
#, c-format
msgid "Delete selected printer"
msgstr "Видалити вибрану друкарку"

#: standalone/printerdrake:233
#, c-format
msgid "Refresh"
msgstr "Поновити"

#: standalone/printerdrake:233
#, c-format
msgid "Refresh the list"
msgstr "Поновити список"

#: standalone/printerdrake:235
#, c-format
msgid "Configure CUPS"
msgstr "Налаштувати CUPS"

#: standalone/printerdrake:235
#, c-format
msgid "Configure CUPS printing system"
msgstr "Налаштувати систему друку CUPS"

#: standalone/printerdrake:521
#, c-format
msgid "Authors: "
msgstr "Автори: "

#: standalone/printerdrake:527
#, c-format
msgid "Printer Management \n"
msgstr "Керування друкарками \n"

#: standalone/scannerdrake:50
#, fuzzy, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr "Потрібно встановити пакунок %s. Ви хочете його встановити?"

#: standalone/scannerdrake:54
#, fuzzy, c-format
msgid "Aborting Scannerdrake."
msgstr "Scannerdrake"

#: standalone/scannerdrake:59
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
"Неможливо встановити пакунки, необхідні для встановлення сканерів з "
"допомогою Scannerdrake."

#: standalone/scannerdrake:60
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "Scannerdrake не буде запущено."

#: standalone/scannerdrake:66 standalone/scannerdrake:459
#, c-format
msgid "Searching for configured scanners ..."
msgstr "Йде пошук налаштованих сканерів ..."

#: standalone/scannerdrake:70 standalone/scannerdrake:463
#, c-format
msgid "Searching for new scanners ..."
msgstr "Йде пошук нових сканерів ..."

#: standalone/scannerdrake:78 standalone/scannerdrake:485
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "Перестворюється список налаштованих сканерів ..."

#: standalone/scannerdrake:100 standalone/scannerdrake:141
#: standalone/scannerdrake:155
#, fuzzy, c-format
msgid "The %s is not supported by this version of %s."
msgstr "%s не підтримується цією версією Лінакс Мандрейк."

#: standalone/scannerdrake:103
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "Знайдено %s на %s, налаштувати автоматично?"

#: standalone/scannerdrake:115
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s немає в базі даних про сканери, налаштуєте вручну?"

#: standalone/scannerdrake:130
#, c-format
msgid "Select a scanner model"
msgstr "Вкажіть модель сканера"

#: standalone/scannerdrake:131
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:132
#, c-format
msgid "Detected model: %s"
msgstr "Знайдено модель: %s"

#: standalone/scannerdrake:134
#, c-format
msgid ", "
msgstr ", "

#: standalone/scannerdrake:135
#, c-format
msgid "Port: %s"
msgstr "Порт: %s"

#: standalone/scannerdrake:161
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "Пристрій %s невідомий у цій версії Scannerdrake."

#: standalone/scannerdrake:169 standalone/scannerdrake:183
#, fuzzy, c-format
msgid "Do not install firmware file"
msgstr "Не встановлювати файл мікропрограми."

#: standalone/scannerdrake:173 standalone/scannerdrake:225
#, fuzzy, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""
"Можливо, що Ваш %s потребує щоб його мікропрограма завантажувалася в нього "
"кожного разу при вмиканні."

#: standalone/scannerdrake:174 standalone/scannerdrake:226
#, fuzzy, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""
"В цьому випадку Ви можете зробити так, щоб це виконувалось автоматично."

#: standalone/scannerdrake:175 standalone/scannerdrake:229
#, fuzzy, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""
"Щоб зробити це, Вам необхідно надати файл мікропрограми для Вашого сканеру, "
"щоб він міг бути встановлений."

#: standalone/scannerdrake:176 standalone/scannerdrake:230
#, fuzzy, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""
"Ви можете знайти файл на диску чи дискеті, що поставлялись зі сканером, на "
"домішній сторінці виробника, або на Вашому Windows-розділі."

#: standalone/scannerdrake:178 standalone/scannerdrake:237
#, fuzzy, c-format
msgid "Install firmware file from"
msgstr "Встановлення мікропрограми з"

#: standalone/scannerdrake:198
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "Виберіть файл"

#: standalone/scannerdrake:201 standalone/scannerdrake:260
#, fuzzy, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr "Файл мікропрограми %s не існую або недоступний!"

#: standalone/scannerdrake:224
#, fuzzy, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""
"Можливо, що Ваші сканери потребують мікропрограми для завантаження в них при "
"кожному включенні."

#: standalone/scannerdrake:228
#, fuzzy, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""
"Щоб це зробити, Вам необхідно надати файли мікропрограми для Ваших сканерів, "
"щоб їх можна було встановити."

#: standalone/scannerdrake:231
#, fuzzy, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""
"Якщо Ви вже встановили мікропрограму для Вашого сканеру, Ви можете зараз "
"його оновити, надавши новий файл мікропрограми."

#: standalone/scannerdrake:233
#, fuzzy, c-format
msgid "Install firmware for the"
msgstr "Встановлення мікропрограми для"

#: standalone/scannerdrake:256
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "Виберіть файл"

#: standalone/scannerdrake:282
#, fuzzy, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr "Файл мікропрограми для %s успішно встановлено."

#: standalone/scannerdrake:292
#, c-format
msgid "The %s is unsupported"
msgstr "Пристрій %s не підтримується"

#: standalone/scannerdrake:297
#, fuzzy, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"Потрібно налаштувати %s з допомогою printerdrake.\n"
"Ви можете запустити printerdrake з центру керування Мандрейк в розділі "
"Залізо."

#: standalone/scannerdrake:301 standalone/scannerdrake:308
#: standalone/scannerdrake:338
#, c-format
msgid "Auto-detect available ports"
msgstr "Автоматично визначити наявні порти"

#: standalone/scannerdrake:303 standalone/scannerdrake:349
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Будь ласка, вкажіть пристрій, до якого під'єднано Ваш %s"

#: standalone/scannerdrake:304
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Зауваження: паралельні порти не можуть бути автовизначені)"

#: standalone/scannerdrake:306 standalone/scannerdrake:351
#, c-format
msgid "choose device"
msgstr "виберіть пристрій"

#: standalone/scannerdrake:340
#, c-format
msgid "Searching for scanners ..."
msgstr "Йде пошук сканерів ..."

#: standalone/scannerdrake:375
#, fuzzy, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"Ваш %s було налаштовано.\n"
"Тепер Ви можете сканувати документи з допомогою \"XSane\" з меню програм "
"Мультимедіа/Графіка."

#: standalone/scannerdrake:399
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Наступні сканери\n"
"\n"
"%s\n"
"доступні у Вашій системі.\n"

#: standalone/scannerdrake:400
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Наступний сканер\n"
"\n"
"%s\n"
"доступний у Вашій системі.\n"

#: standalone/scannerdrake:403 standalone/scannerdrake:406
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Не знайдено доступних сканерів у Вашій системі.\n"

#: standalone/scannerdrake:420
#, c-format
msgid "Search for new scanners"
msgstr "Шукати нові сканери"

#: standalone/scannerdrake:426
#, c-format
msgid "Add a scanner manually"
msgstr "Додати сканера вручну"

#: standalone/scannerdrake:433
#, fuzzy, c-format
msgid "Install/Update firmware files"
msgstr "Виберіть файл"

#: standalone/scannerdrake:439
#, c-format
msgid "Scanner sharing"
msgstr "Спільний доступ до сканера"

#: standalone/scannerdrake:498 standalone/scannerdrake:663
#, c-format
msgid "All remote machines"
msgstr "Всі віддалені машини"

#: standalone/scannerdrake:510 standalone/scannerdrake:813
#, c-format
msgid "This machine"
msgstr "Ця машина"

#: standalone/scannerdrake:550
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Тут Ви можете вказати, чи приєднані до цієї машини сканери можуть бути "
"доступними до віддалених машин, і до яких саме."

#: standalone/scannerdrake:551
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Тут Ви можете також вирішити, чи сканери з віддалених машин будуть "
"доступними на цій машині."

#: standalone/scannerdrake:554
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Сканери з цієї машини є доступними для інших комп'ютерів"

#: standalone/scannerdrake:556
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Сканер є доступним для машин: "

#: standalone/scannerdrake:570
#, c-format
msgid "Use scanners on remote computers"
msgstr "Використовувати сканери на віддалених комп'ютерах"

#: standalone/scannerdrake:573
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Використовувати сканери на машинах: "

#: standalone/scannerdrake:600 standalone/scannerdrake:672
#: standalone/scannerdrake:822
#, c-format
msgid "Sharing of local scanners"
msgstr "Спільний доступ до локальних сканерів"

#: standalone/scannerdrake:601
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""
"Це перелік машин, на яких можуть бути доступними локально приєднані сканери:"

#: standalone/scannerdrake:612 standalone/scannerdrake:762
#, c-format
msgid "Add host"
msgstr "Додати машину"

#: standalone/scannerdrake:618 standalone/scannerdrake:768
#, c-format
msgid "Edit selected host"
msgstr "Редактувати вибрану машину"

#: standalone/scannerdrake:627 standalone/scannerdrake:777
#, c-format
msgid "Remove selected host"
msgstr "Видалити вибрану машину"

#: standalone/scannerdrake:651 standalone/scannerdrake:659
#: standalone/scannerdrake:664 standalone/scannerdrake:710
#: standalone/scannerdrake:801 standalone/scannerdrake:809
#: standalone/scannerdrake:814 standalone/scannerdrake:860
#, c-format
msgid "Name/IP address of host:"
msgstr "Назва/IP-адреса машини:"

#: standalone/scannerdrake:673 standalone/scannerdrake:823
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "Виберіть машину, на якій локальні сканери повинні бути доступними:"

#: standalone/scannerdrake:684 standalone/scannerdrake:834
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Вам потрібно ввести або назву машини, або IP-адресу.\n"

#: standalone/scannerdrake:695 standalone/scannerdrake:845
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Ця машина вже є в списку, її не можна додати знову.\n"

#: standalone/scannerdrake:750
#, c-format
msgid "Usage of remote scanners"
msgstr "Використання віддалених сканерів"

#: standalone/scannerdrake:751
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Це перелік машин, з яких можна використовувати сканери:"

#: standalone/scannerdrake:908
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr "Потрібно встановити пакунок %s. Ви хочете його встановити?"

#: standalone/scannerdrake:912 standalone/scannerdrake:916
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "Ваші сканери не будуть доступними в мережі."

#: standalone/service_harddrake:49
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Деякі пристрої в обладнанні класу \"%s\" було видалено:\n"

#: standalone/service_harddrake:53
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "Деякі пристрої було додано:\n"

#: standalone/service_harddrake:98
#, c-format
msgid "Hardware probing in progress"
msgstr "Відбувається визначення пристроїв"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Мова"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Ліцензія"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Сконфігуруйте мишу"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Визначення твердого диску"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Виберіть тип встановлення"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Виберіть тип клавіатури"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Розбиття на розділи"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Форматувати розділи"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Виберіть пакунки для встановлення"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Встановити систему"

#: steps.pm:25
#, c-format
msgid "Root password"
msgstr "Пароль користувача root"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Додати користувача"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Налаштувати мережу"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Встановити завантажувач"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Налаштувати X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Налаштувати сервіси"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Встановити поновлення"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Вийти з встановлення"

#: ugtk2.pm:1075
#, c-format
msgid "Is this correct?"
msgstr "Все вірно?"

#: ugtk2.pm:1203
#, c-format
msgid "Expand Tree"
msgstr "Розширити дерево"

#: ugtk2.pm:1204
#, c-format
msgid "Collapse Tree"
msgstr "Згорнути дерево"

#: ugtk2.pm:1205
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Перемикнути між простим списком і сортованим по групах"

#: wizards.pm:95
#, fuzzy, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s не встановлено\n"
"Клацніть \"Далі\" для встановлення або \"Скасувати\" для виходу"

#: wizards.pm:99
#, fuzzy, c-format
msgid "Installation failed"
msgstr "Встановлення тем завершилося невдало!"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Офісна робоча станція"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Програми для офісу: текстові процесори (kword, abiword), бухгалтерські\n"
"таблиці (kspread, gnumeric), переглядачі файлів pdf, тощо"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Ігрова станція"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Програми для розваг: ігри-перегони, ігри на дошці, стратегічні, тощо"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Мультимедійна станція"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Звукові та відео програвачі та редактори"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Станція для інтернету"

#: ../../share/compssUsers:999
#, fuzzy
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Набір засобів для читання та передавання електронної пошти та груп\n"
"новин (pine, mutt, tin..), та для перегляду інформаційних тенет"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Мережевий Комп'ютер (клієнт)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Клієнти для різних протоколів (ssh включно)"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Конфіґурація"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Засоби для полегшення конфіґурування Вашого комп'ютера"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Засоби для консолі"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Редактори, командні оболонки, файлові засоби та термінали"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "Робоча станція KDE"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"Робоче середовище K (KDE) - основне графічне середовище з набором\n"
"допоміжних засобів"

#: ../../share/compssUsers:999
msgid "GNOME Workstation"
msgstr "Робоча станція Gnome"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Графічне середовище з дружнім інтерфейсом та програмами, засоби для\n"
"стільниці"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Інші робочі середовища"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, тощо"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Бібліотеки для програмування в C, C++, програми та файли include"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Документація"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Книжки та HOWTO про Лінакс та вільне програмне забезпечення"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr "LSB"

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr "Стандартна база Лінакс. Підтримка програм сторонніх виробників"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Тенета/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Mail"
msgstr "Пошта"

#: ../../share/compssUsers:999
msgid "Postfix mail server"
msgstr "Поштовий сервер postfix"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "База даних"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "Сервери баз даних PostgreSQL або MySQL "

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Захисний шлюз/Маршрутизатор"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Інтернет-шлюз"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Мережевий комп'ютер (сервер)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Сервер NFS, сервер SMB, проксі-сервер, сервер ssh"

#: ../../share/compssUsers:999
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Набір засобів для читання та передавання електронної пошти та новин,\n"
"а також для перегляду тенет"

#~ msgid "Provider dns 1 (optional)"
#~ msgstr "1й DNS провайдера (необов'язково)"

#~ msgid "Provider dns 2 (optional)"
#~ msgstr "2й DNS провайдера (необов'язково)"

#~ msgid "Ethernet Card"
#~ msgstr "Плата Ethernet"

#~ msgid "DHCP Client"
#~ msgstr "Клієнт DHCP"

#, fuzzy
#~ msgid "Display"
#~ msgstr "щоденно"

#, fuzzy
#~ msgid "Display configuration"
#~ msgstr "Конфіґурація мережі"

#~ msgid ""
#~ "Change\n"
#~ "Restore Path"
#~ msgstr ""
#~ "Змінити\n"
#~ "Шлях відновлення"

#~ msgid "European protocol"
#~ msgstr "Європейський протокол"

#~ msgid "Found \"%s\" interface do you want to use it ?"
#~ msgstr "Знайдено інтерфейс \"%s\", хочете використовувати його?"

#~ msgid "What kind is your ISDN connection?"
#~ msgstr "Якого типу з'єднання ISDN Ви маєте?"

#~ msgid "Do you want to start a new configuration ?"
#~ msgstr "Чи хочете Ви випробувати нову конфіґурацію?"

#~ msgid ""
#~ "I have detected an ISDN PCI card, but I don't know its type. Please "
#~ "select a PCI card on the next screen."
#~ msgstr ""
#~ "Знайдена ISDN PCI плата, але невідомого типу. Виберіть, будь-ласка, одну "
#~ "з плат PCI на наступному екрані."

#~ msgid "No ISDN PCI card found. Please select one on the next screen."
#~ msgstr ""
#~ "Не знайдено плати ISDN PCI. Виберіть одну із плат у наступному вікні."

#~ msgid "DrakTermServ"
#~ msgstr "DrakTermServ"

#~ msgid "Under Devel ... please wait."
#~ msgstr "Розробляється ... будь-ласка, зачекайте."

#~ msgid "Windows (FAT32)"
#~ msgstr "Windows (FAT32)"

#, fuzzy
#~ msgid ""
#~ "Please enter the name of the interface connected to the "
#~ "internet.              \n"
#~ "                \n"
#~ "Examples:\n"
#~ "                ppp+ for modem or DSL connections, \n"
#~ "                eth0, or eth1 for cable connection, \n"
#~ "                ippp+ for a isdn connection.\n"
#~ msgstr ""
#~ "Будь-ласка, введіть назву інтерфейсу, під'єднаного до інтернету.\n"
#~ "\n"
#~ "Приклади:\n"
#~ "\t\tppp+ для модемних або DSL з'єднань, \n"
#~ "\t\teth0 або eth1 для кабельного з'єднання, \n"
#~ "\t\tippp+ для isdn з'єднання.\n"

#~ msgid ""
#~ "This uses the same syntax as the command line program 'cdrecord'. "
#~ "'cdrecord -scanbus' would also show you the device number."
#~ msgstr ""
#~ "Це використовує такий самий синтаксис, як і програма командного рядка "
#~ "'cdrecord'. 'cdrecord - scanbus' також покаже Вам номер пристрою."

#~ msgid ""
#~ "Enter your CD Writer device name\n"
#~ " ex: 0,1,0"
#~ msgstr ""
#~ "Введіть назву пристрою для запису КД\n"
#~ " ex: 0,1,0"

#~ msgid "Scientific Workstation"
#~ msgstr "Наукова робоча станція"

#~ msgid "Scientific applications such as gnuplot"
#~ msgstr "Наукові програми, як gnuplot"

#~ msgid "DNS/NIS "
#~ msgstr "DNS/NIS "

#~ msgid "Domain Name and Network Information Server"
#~ msgstr "Сервер імен та мережевий інформаційний сервер (DNS, NIS)"

#, fuzzy
#~ msgid "No wireless network adapter on your system!"
#~ msgstr "У Вашій системі немає адаптера мережі!"

#~ msgid "Can't create log file!"
#~ msgstr "Неможливо створити файл журналу!"

#, fuzzy
#~ msgid "dhcp"
#~ msgstr "користуватися dhcp"

#~ msgid "Please select media for backup..."
#~ msgstr "Будь-ласка, виберіть носія для резервування..."

#, fuzzy
#~ msgid "real_file"
#~ msgstr "Виберіть файл"

#~ msgid "Configuration of a remote printer"
#~ msgstr "Налаштування віддаленої друкарки"

#~ msgid "Gnome Workstation"
#~ msgstr "Робоча станція Gnome"

#~ msgid "Running \"%s\" ..."
#~ msgstr "Виконується \"%s\" ..."

#~ msgid "utopia 25"
#~ msgstr "utopia 25"

#~ msgid "On Hard Drive"
#~ msgstr "на твердому диску"

#~ msgid "Messages"
#~ msgstr "Повідомлення"

#~ msgid "Syslog"
#~ msgstr "Системний журнал"

#~ msgid "Compact"
#~ msgstr "Компактний"