# translation of DrakX-tg.po to Tajik # Copyright (C) 2001,2003 Free Software Foundation, Inc. # Roger Kovacs , 2002,2003. # Dilshod Marupov , 2003 # msgid "" msgstr "" "Project-Id-Version: DrakX-tg\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: 2003-11-06 21:03-0500\n" "Last-Translator: Roger Kovacs\n" "Language-Team: Tajik\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.1\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Барои ёфтани нуқтаҳои насб қисмҳо пуйиш мегардад" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "агар yes муқаррар шавад, онгоҳ иловаҳо/хориҷшавии файлҳои suid root-ро " "тафтишнамоед." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s номи соҳибӣ , суроғаи MAC, IP, nbi-image, 0/1 барои THIN_CLIENT, 0/1 " "барои Local Config талаб карда мешавад...\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" "Пайкарабандӣ тағир ёфтааст - аз сари нав clusternfs/dhcpd-ро оғоз намоед?" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "\t\tТоза намоед=%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Эҳтиётнамоии тафовутӣ танҳо ҳамон файлҳоро нигоҳ медорад, ки тағир ёфтааст ё " "ин ки барои нусхаи эҳтиётии асосии нодир нав мебошад." #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "даргоҳи чопгари шабакавӣ" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "Лутфан, дискетро гузоред:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "DrakTermServ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Ҷадвали бахши ёвар ҳаҷми якхела надорад\n" "Ҳоло ҳам давом диҳем?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "Кадом номи корванд" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Кадом навъи элементро илова кардан мехоҳед?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "Барқарори ҷадвали бахш" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "номи соҳибӣ ба танзим дароварда шудааст..." #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "Дар хидматрасони CUPS \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Баъд аз пайкарабандӣ коргузорӣ мегардад" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" "Сатҳи ҳозираи бехатарӣ: %s\n" "Ҳуқуқро барои дида баромадан/таҳрир намудан интихоб намоед" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Ба ҷояш ``%s''-ро истифода баред " #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Навъ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Ҳамчунин чопгарҳое ки бо файлҳои PPD ба танзим дароварда шудааст ва аз " "тарафиистеҳсолгарони он пешниҳод гардидааст ё ин ки бо ронандаҳои худи CUPS " "тағирдода намешавад." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Сри Лонко" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Чопгари зерин\n" "\n" "%s%s\n" "бевосита ба системи шумо пайваст гардидааст" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Ҷумҳурии Марказии Африқо" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Дастгоҳи даричаи тадохул" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "Афзалиятҳои пешрафта" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "Усули шабакавӣ:" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "Харитаи ethernet" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Агар муқаррар гардад, онгоҳ ҳисоботи мактубиро ба ин суроғаи " "электронӣмефиристонад, вагарна онро ба root равона месозад" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Параметрҳо" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "не" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "Автомуаяйнамоӣ" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Интерфейс:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Интихоби синфи коргузорӣ" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Зоҳиран, систем ба интернет пайваст нашудааст.\n" "Аз сари нав алоқаи худро ба танзим дароред." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Чопгари худро ба хидматрасони Linux пайваст намоед ва ба мошинҳои Windows " "иҷозат диҳед, то ки ба сифати мизоҷ ба он пайваст бошад.\n" "\n" "Шумо дар ҳақиқат хоҳиши давом додани истифодаи ин чопгарро доред?" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Билорусиё" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Хатогии қайд дар файл %s" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "Натиҷаҳои тафтишро ба syslog бароред" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd барои назорати ҳолати батарея ва қайди он ба воситаи syslog истифода " "мегардад\n" "Инчунин онро барои хомӯш намудани мошина дар ҳолати дараҷаи баланди " "батареяҳоистифода бурдан мумкин аст." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "Лентаи магнитиро барои нигоҳдорӣ истифода баред" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Қуттиҳои зерин коргузорӣ хоҳад шуд" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "Танзимдарории CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Total progress" msgstr "Пешрафти умумӣ" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Барои ҷойгир намудани қисмҳои нав ҷои изофа кофӣ нест" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Ғеҷонидан" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Drakbackup иҷро мегардад дар %s:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "ҳа" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "(" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Маҳамат намоед ба Устози Пайкарабандии Шабака.\n" "\n" "Ҳоло мо алоқаи шуморо ба интернет ва/ё ин ки ба шабакаи маҳаллӣ амалӣ " "мегардонем.\n" "Агар шумо хоҳиши истифода авто муаяйнамо набошед, онгоҳ қуттии " "тафтишроинтихоб накунед.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr ")" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Лубнон" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "Ист" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "Соҳиби интихобшударо таҳрир кунед" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "Ягон дастгоҳи CD муаяйн нашудааст!" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tФайлҳои .backupignore-ро истифода баред\n" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "Булғорӣ (фонетикӣ)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "Оғози ip-и DHCP" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 кБ" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "Лентаро баъд аз тартиби нусхаи эҳтиётӣ аз нав давр назанонед" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Хосиятҳои асосии корандози худборшав" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "--manual] [--device=дастгоҳ] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=дастгоҳ]" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "Лента" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Молезӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "Шабака пуйиш мегардад..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Бо ёрии интихоби мазкур шумо метавонед нусхаи дилхоҳи феҳристи/etc худро аз " "нав\n" " барқарор намоед." #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "Тағирот дароварда шуд, шумо dm хадамотро аз нав оғоз кардан мехоҳед ?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Швейсарӣ (тарҳбандии фаронсавӣ)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid бо камбудӣ ба охир расид (эҳтимол raidtools мавҷуд нест?)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "Августа" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "FTP server" msgstr "X Хидматрасон" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "Наворгири вебӣ" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "андозаи пинҳонии (дараҷаи дуюм) cpu" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "Харитаи овоздор" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "Моҳ" #: ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "Ҷустҷӯи файлҳо барои барқарорӣ" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Лукзамбург" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Барои чоп намудани файл аз сатри фармонӣ (оинаи поёна), фармони\"%s <файл-" "ро> истифода баред\".\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Савияи %s\n" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "Суриягӣ (фонетикӣ)" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "Эрон" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Автобус" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Ироқ" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to %s ..." msgstr "пайвастшавӣ ба %s ..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "Дар танзимгари ҳозира низои муайяни суроғаи шабакаи маҳаллӣ пайдо шудааст %" "s!\n" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Ба танзимдарорӣ..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Барои аксарияти харитаҳои муосири ТВ модули bttv-и асоси GNU/Linux ба " "тавриавтоматӣ параметрҳои дурустро муаяйн менамояд.\n" "Агар харитаи шумо муаяйн нашуда бошад, онгоҳ шумо метавонед ба таври " "маҷбурӣистифодаи намудҳои дурусти тюнер ва харитаро ба роҳ мемонед.Агар " "зарурият бошад, онгоҳ ба таври оддӣ параметрҳои харитаи ТВ-и худро " "интихобнамоед." #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Гузарвожа (боз)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "Кофтукови рамзҳои муқарраршуда" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "Мизи кории пешфарз" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" "Барои пешниҳоди ҳисбот оиди хатогӣ тугмачаи Ҳисоботро пахш намоед.\n" "Оинаи барномаи нозири веб дар %s кушода мешавад, ки дар он шаклеро барои " "пур\n" " намудан пайдо мекунед. Ахбороти дар боло пешниҳод шуда ба ин хизматрасон\n" "фиристода хоҳад шуд." #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Винизуэло" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "Суроғаи IP" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Андозаҳоро интихоб намоед" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Рӯйхати додаҳои тасдиқшуда:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Танҳо бо роҳи саҳеҳ метавон насб намуд (яъне, интихоби а ба насби системи\n" "файлӣ намеорад)." #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Модеми шумо аз тарафи систем дастгирӣ намеёбад.\n" "Ба http://www.linmodems.org назар намоед" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Дигар бахшро интихоб кунед" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "Корванди равона" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "Номи корванд" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "Тугмачаи чап \"Windows\"" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Гуён" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "Танзимдарории Хидматгори dhcpd" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Барои феҳрист истифода мегардад:\n" " танҳо соҳиби феҳрист ё ин ки файл дар ин феҳрист метавонад онро хориҷ намояд" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " дар хидматрасони Novell \"%s\", чопгар \"%s\"" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Name" msgstr "Номи Чопгар" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Хориҷи модул" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Гузарвожа" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "Танзимдарории Пешрафта" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Дастгоҳи бисёрвазифагии HP-и шумо пуйиш мегардад" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Root" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Барои илова RAID-и вуҷуддоштаро интихоб кунед" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Туркӣ (модели муосири \"Q\")" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "Мактуби Lilo ёфт нашудааст" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Навсозии автоматии сарлавҳаи асос дар /boot барои\n" "/usr/include/linux/{autoconf,version}.h" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "агар лозим шуда бошад" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "Барқарор Нагузашт..." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Гузарвожаро барои ин систем дар танзимгари drakbackup нигоҳ доред." #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Муқаддима\n" "Системи операсионӣ ва қисмҳои гуногуне ки дар тақсимоти Mandrake Linux \n" "дастрас мебошад баъдан \"Маҳсулотҳои Нармафзор\" номида мешавад.\n" "Маҳсулотҳои Нармафзор иборат аст аз маҷмӯи барномаҳо, усулҳо, қоидаҳо\n" "ва ҳуҷҷатҳое ки бо системи операсионӣ ва қисмҳои гуногуни тақсимоти\n" "Mandrake Linux алоқаманд аст.\n" "\n" "\n" "1. Шартномаи Лисензионӣ\n" "\n" "Лутфан ин ҳучҷатро бо диққат хонед. Ҳуҷҷати мазкур ин шартномаи лисензионӣ " "байни шумо ва \n" "MandrakeSoft S.A., ки он ба Маҳсулотҳои Нармафзор тааллуқ дорад.\n" "Маҳсулотҳои Барномавиро муқаррар намуда, чоп намуда ва истифода намудан бо " "мақсадҳои дигар шумо комилан бо шарту қоидаҳои шартномаи мазкур розӣ " "мебошед. Агар шумо бо яке аз қисмҳои Шартномаи мазкур розӣ набошед, онгоҳ ба " "шумо иҷозат дода намешавад,то ки шумо Маҳсулотҳои Барномавиро муқаррар, паҳн " "ва истифода намоедҲар як кӯшиши истифодабарӣ, паҳнкунӣ ва истифодаи " "Маҳсулотҳои Барномавӣбо мақсаде ки ба шартҳои Шартномаи мазкур мувофиқат " "намекунад шуморо аз ҳар ҳуқуқи аз тарафи шартнома додашуда озод менамоядБаъд " "аз ба охир расидани мӯҳлати шартнома шумо бояд бозудӣ ҳамаи нусхаҳои " "Маҳсулотҳои Барномавиро нобуд намоед.\n" "\n" "\n" "2. Ӯҳдадориҳои кафолатноки маҳдуд\n" "\n" "Маҳсулотҳои Барномавӣ ва ҳуҷҷати пешниҳодшуда бечунучаро\"мебошад\"бе ҳеҷ " "кафолат дар доираи қонун.\n" "MandrakeSoft S.A. дар ягон ҳолате аз тарафи қонун пешбинӣ шуда маъсулятро " "барои камбудии муаяйне, тасодуфӣ, бевосита ва бавосита (аз он ҷумла камбудии " "беҳудуд аз муфлисшавии бизнес, танаффус дар фаъолияти тиҷоратӣ, муфлисшавии " "молиявӣ, хароҷотҳои судӣ ва ҷаримаҳое ки натиҷаи мубоҳисаи судӣ мебошад ё " "дигар камбудиҳои бавосита), ки натиҷаи истифодаи Маҳсулотҳои Барномавӣ, " "ҳатто агар ба MandrakeSoft S.A. маълум бошад дар хусуси имконият ё ин ки " "ҳолати чунин камбудӣ\n" "\n" "ӮҲДАДОРИИ МАҲДУДНОКЕ БО НИГОҲДОРӢ ВА ИСТИФОДАИ ТАЪМИНОТИ БАРНОМАВӢ ДАР ЯК " "ЧАНД МАМЛАКАТҲО ВОБАСТА АСТ Мувофиқи доираҳои қонунӣ MandrakeSoft S.A. ва " "паҳнкунандагони он бе ҳеҷ шарту асос маъсулиятро В пределах, дозволенных " "законом, или ее распространители\n" "ни при каких условиях не несут ответственности за любой, какой бы то ни " "было\n" "определенный, случайный, прямой или косвенный ущерб (включая неограниченный\n" "ущерб от крушения бизнеса, перерывов в коммерческой деятельности, " "финансовых\n" "убытков, судебных издержек и штрафов, являющихся результатом судебных\n" "разбирательств, или любых других косвенных потерь), являющихся результатом\n" "владения и использования компонентов программного обеспечения,\n" "или являющихся результатом скачивания компонентов программного обеспечения\n" "с одного из сайтов Mandrake Linux, запрещенных или ограниченных в некоторых\n" "странах местными законами.\n" "Ограниченная ответственность применяется, но не ограничивается,\n" "к компонентам сильной криптографии, включаемых в Программные Продукты.\n" "\n" "\n" "3. Лицензия GPL и связанные лицензии\n" "\n" "Программные Продукты состоят из компонентов, созданных различными людьми\n" "или организациями. Большинство этих компонентов находятся под действием\n" "условий и положений GNU General Public Licence, далее называемой \"GPL\",\n" "или похожих лицензий. Большинство этих лицензий позволяют вам использовать,\n" "тиражировать, адаптировать или распространять далее компоненты, на которые\n" "они распространяются. Пожалуйста, внимательно читайте условия и положения\n" "лицензионного соглашения для каждого из компонент перед использованием\n" "любого компонента. Любые вопросы по лицензии компонента должны быть\n" "адресованы автору компонента, а не MandrakeSoft.\n" "Программы, разработанные MandrakeSoft S.A., находятся под действием " "лицензии\n" "GPL. Документация, написанная MandrakeSoft S.A., находится под действием\n" "особой лицензии. Пожалуйста, обратитесь к документации за дополнительной\n" "информацией.\n" "\n" "4. Права на интеллектуальную собственность\n" "\n" "Все права на компоненты Программных Продуктов принадлежат их " "соответствующим\n" "авторам и защищены законами об интеллектуальной собственности и авторском\n" "праве, применительно к программному обеспечению.\n" "MandrakeSoft S.A. сохраняет за собой право изменять или адаптировать\n" "Программные Продукты, как целиком, так и по частям, любым способом и для\n" "любых целей.\n" "\"Mandrake\", \"Mandrake Linux\" и соответствующие логотипы являются " "торговыми марками MandrakeSoft S.A.\n" "\n" "\n" "5. Основные законы\n" "\n" "Если какая-либо часть этого соглашения является недействительной,\n" "противозаконной или противоречащей действующему законодательству, эта\n" "часть исключается из этого контракта. Вы остаетесь ограниченными\n" "другими пригодными разделами соглашения.\n" "Условия и положения данной Лицензии находятся под действием французского\n" "законодательства.\n" "Все разногласия по поводу условий и положений этой лицензии, скорее всего, " "будут оспариваться в суде. В последнюю очередь оспаривание вопроса будет " "передано в соответствующий Законодательный Суд Парижа - Франция. По любым " "вопросам, касающимся этого документа, пожалуйста, свяжитесь\n" "с MandrakeSoft S.A.\n" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "Корванди пешфарз" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "координати х нишондоди иҷроиш\n" "аз кунҷи чапи болоӣ" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "Танзимдарории интерфейси равона" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Азозили сатр ба сатр чопгари чопкунанда" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Агар шумо харитаи ISA дошта бошед, онгоҳ дар экрани дигар қиматҳо бояд " "дурустбошад.\n" "\n" "Агар шумо харитаи PCMCIA-ро дошта бошед, онгоҳ шумо бояд \"irq\" и \"io\"-" "ихаритаи худро донед.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "Ягон саҳифаи санҷиширо чоп накунед" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "Гурмуки" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "%s аллакай дар истифода аст\n" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "APIC-ро манъ намудан" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Ин гузарвожа бениҳоят кӯтоҳ мебошад (он бояд ақаллан дарозиаш %d бошад)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "[тапишгоҳ]" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "Рӯйхатро Коргузорӣ намоед" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "Ивази\n" "Барқарори Роҳ" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "Танҳо барои рӯзи интихобшуда нишон диҳед" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tИстифодаи дискро дар ҳудуди %s MB маҳдуд намоед\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 кБ" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Қайд: Даргоҳҳои параллелӣ ба таври автоматӣ муайян намешавад)" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "<идора>N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Кадом намуди кордро шумо доред?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "<идора>O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Амният" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Барои муқаррар намудани интихоб ва идора намудани вазифаҳои чоп " "шумометавонед интерфейси графикиро \"xpdq\" истифода баред.\n" "Агар шумо муқоваи графикии KDE-ро истифода баред, онгоҳ шумо " "тугмачаитаъҷилиро бо аломати\" - дар мизи корӣ доред, бо номи \"НИГОҲ " "ДОРЕДчопгарро!\", ки бо тезӣ ҳамаи супоришҳои чопро дар вақти пахши оннигоҳ " "медорад. Ин муфид аст, масалан, ҳангоми гирифтани коғаз.\n" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "<идора>Б" #: ../../standalone/drakbackup:1 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Барои барқарор намудан нусхаҳои эҳтиётӣ ёфта намешавад...\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "Номаълум" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" "Ин хидматрасон аллакай дар рӯйхат аст, онро боз дохил кардан мумкин нест.\n" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Танзимдарории Шабака" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "<идора>S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Протокол ба тамоми ҷаҳон\n" "Канали D мавҷуд нест (хатҳои чудошуда)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ ин файлро ба танзим медарорад барои кор намудан " "даралоқа бо қайдҳои ташкилшуда дар\n" " \t\tmkinitrd-net, /etc/dhcpd.conf, барои хизматрасониитасвири оғоз " "гардида ба ҳар\n" " \t\tяк мизоҷи бедиск.\n" "\n" " \t\tШакли хоси файли ба танзим даровардашуда tftp:\n" " \t\t\n" " \tservice tftp\n" " \t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tДар ин ҷо фарқият аз коргузории пешфарз дар тағиротинишонаи " "disable аст дар\n" " \t\t'no' ва тағироти роҳи феҳрист дар /var/lib/tftpboot, киmkinitrd-" "net\n" " \t\tтасвирҳои худро ҷойгир менамояд." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "Интихоби %s бояд рақам бошад!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "Хулоса" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Шумо X-ро ба танзим надаровардаед. Шумо дар ҳақиқат инро мехоҳед?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "Ба танзимдарории чопгар комилан ба таври автоматӣ иҷро хоҳад шуд. Агар " "чопгари шумо нодуруст муайян гардад ё ин ки агар шумо дастӣ чопгарро ба кор " "дароварданӣ бошед, онгоҳ \"Батанзимдарории дастӣ\"-ро пахш намоед." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Кадом навъи ҷузъбандӣ?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "рӯхати файлҳо бо FTP фиристода шудааст: %s\n" " " #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "интерфейс" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "CD-и бисёрсеансӣ" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "сатрҳои бо вергул ҷудошуда" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Мошинҳое ки бо онҳо пуйишгарҳо бояд истифода гардад:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "Пайғомҳо" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Номаълум|CPH06X (bt878) [аксарияти истеҳсолкунандагон]" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "Хидматрасони POP ва IMAP" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Мекзик" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "Моделҳои Stepping" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Руондо" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Суис" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Шоҳигарии Бруней" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Шумо ягон %s интеҳо доред?" #: ../../standalone/drakTermServ:1 #, c-format msgid "You must be root to read configuration file. \n" msgstr "Барои хондани файли танзимшуда бояд root будан даркор аст \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Параметрҳои чопгари дур lpd" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux ин системи бисёркорванд мебошад, ин чунин маъно дорад,\n" "ки ҳар як корванд метавонад имтиёзҳои худ, файлҳои худ ва ғайраро\n" "дошта бошад. Барои бисёртар омӯхтан шумо метавонед \"Раҳнамои Корванд\"-ро\n" "хонед. Ғайр аз \"root\"-и гуногун, ки идоракунанда аст, корвандҳое,\n" "ки шумо инҷо илова мекунед ҳуқуқи иваз кардани ягон чиз ғайр аз файлҳо\n" "ва шакли худ надоранд. Шумо бояд аққалан як корванди мунтазам барои худ\n" "офаред. Ин қайд ҷоест, ки шумо бояд барои истифодаи ҳаррӯза дохил шавед.\n" "Гарчанде, ки ҳамчун \"root\" дохил шудан хеле қулай аст, ин метавонад " "хатарнок\n" "ҳам бошад! Хатогии хурд метавонад системи шуморо аз кор барорад. Агар шумо\n" "ҳамчун корванди мунтазам хатогии ҷиддӣ кунед, шумо баъзе маълумотро гум " "хоҳед\n" " кард, локин на ҳамаи системро\n" "\n" "Аввал шумо бояд номи ҳақиқии худро дароред. Ин албатта ҳатмӣ нест - чунки\n" "шумо метавонед чӣ мехоҳед дароред. DrakX калимаи аввалинеро, ки шумо\n" "дохил кардед ба сандуқ гирифта онро ба \"Номи Корванд\" меорад. Ин номест,\n" "ки ин корванди алоҳида барои ба систем дохил шудан истифода хоҳад бурд.\n" "Шумо метавонед онро иваз кунед. Баъд шумо бояд инҷо гузарвожаро дароред.\n" "Гузарвожаи корванди беимтиёз (мунтазам) мисли гузарвожаи \"root\",аз нуқтаи\n" "назари бехатарӣ ҳалкунканда нест, локин ин асос нест барои рад кардани он - " "ба\n" "ҳар ҳол, файлҳои шумо дар хатар мебошанд.\n" "”\n" "Агар шумо дар \"Қабули корванд\" ангушт занед шумо чанд-то хоҳед корванд\n" "илова карда метавонед. Ба ҳар як дӯстатон корванд илова кунед: падаратон ё\n" "хоҳаратон барои мисол. Вақте, ки шумо иловаи ҳамаи корвандҳои дилхоҳро\n" "тамом мекунед \"Шуд\"-ро интихоб кунед.\n" "”\n" "Ангуштзанӣ ба дагмаи \"Пешрафта\" ба шумо иҷозат медиҳад, ки \"ҷилд\"-и\n" "пешфарзро барои ин корванд иваз кунед(кӯшиш бо пешфарз)." #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Роҳи ба Интернет даромаданро танзим намудан..." #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "Лутфан, байни василаи эҳтиётӣ фосилаи вақтро интихоб кунед" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Норвеж" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "Хориҷи тахассус" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Даниягӣ" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Дохилшавии автоматӣ ҳангоми оғоз намудани тугмачаи numlock дар\n" "дар console ва XFree." #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Лутфан, танзимдарории IP-ро барои ин мошин ба кор андозед.\n" "Ҳар як нуқта бояд ҳамчун IP-суроға дар намуди қайди рақамҳои даҳяке ки бо\n" "вергул ҷудо шудааст, дохил гардад (масалан, 1.2.3.4)." #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "Кор гузориши Mandrake Linux дар якчанд CD-ROMҳо таксим шудааст. DrakX\n" "медонад агар қуттии интихобшуда дар CD-ROM-и дигар ҷойгир бошад ва CD-и\n" "мазкурро берун карда аз шумо талаб мекунад, ки дигарашро дохил кунед." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "Ҳангоми тафтиш соҳиб ва гурӯҳ тағир нахоҳад ёфт" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Булғористон" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "Вторник" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "Пардозанда" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Сволборд ва Ҷазоири Ян Майен" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "NIC интихоб нагардидааст!" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Ҳангоми ба танзимдарорӣ муаммоҳо пайдо шуд.\n" "Ба воситаи net_monitor ё mcc васлшавии худро тафтиш намоед. Агар васлшавии " "шумо кор накунад, онгоҳ аз сари нав танзимдарориро оғоз намоед." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "қисми %s ҳоло ҳамчун %s маълум аст" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "Дигар файлҳо Нигоҳ дошта мешавад..." #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "Конго (Киншаса)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "IP хидматрасони SMB" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Ҷадвали бахши гардони %s дар диск навишта мешавад!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "Қуттии HPOJ муқаррар мегардад..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Дискети махсуси худборшавӣ худборшавии системи Linux-и шуморо таъмин " "менамояд\n" "новобаста аз худборкунандаи аввалаи стандартӣ. Ин муфид аст, агар шумо " "хоҳиши\n" "муқаррар намудани системи SILO-и худро надошта бошед ё ин ки агар системи\n" "операсионии дигар SILO-ро хориҷ намояд ё агар SILO бо танзимгари таъминоти\n" "аппарати шумо кор накунад. Дискети махсуси худборшавӣ инчунин метавон бо " "тасвири\n" "нигоҳдориии Mandrake истифода намуд, ки баъд аз муаммоҳои ҷиддӣ пурра\n" "барқарории системи шуморо осон менамояд. Оё шумо хоҳиши ташкил намудани " "диски\n" "худборшавӣ барои системи худ доред?\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Ҳисоботи Азозили DrakBackup\n" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Латвиягӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "ҳармоҳа" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Retry" msgstr "Барқарор" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Номи модул" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "Ҳангоми худборшавӣ оғоз намудан" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "Василаи эҳтиётии изофашавандаро Истифода намудан" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Соҳаи аввали гардон (МБР)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Ал Салвадур" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "Сукуни ҳидоят" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "DVD" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "Аз рӯ и пешфарз Unicode-ро истифода баред" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "модули асоси GNU/Linux, ки ин дастгоҳро идора менамояд" #: ../../standalone/drakclock:1 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Кӯшиши наҷоти ҷадвали бахш" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "Интихоби %s бояд адади бутун бошад!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "Барои муаяйн намудани ҳақиқии корвандон аз гузарвожа истифода баред" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Элементҳое ки онро шумо бояд пур намоед:\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Ҳангоми тартиб додани нусхаҳои эҳтиётӣ ба дигар расона сараввал файлҳо дар " "диски сахт офарида мешавад, баъдан ба расони лозима гузаронида мешавад. " "Дохил намудани ин интихоб имкон медиҳад, ки файлҳои tar-ро аз диски сахт " "баъди ташкил намудани нусхаҳои эҳтиётӣхориҷ намояд." #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Оғоз намудани азнавсозӣ имконпазир нест !!!\n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Ном: " #: ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 миллион ранг (24 бит)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "Ба ҳамаи корвандон иҷозат додан" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "Мағозаи расмии MandrakeSoft" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Бозандозагириӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Андозаи калонтарине ки барои\n" " Drakbackup (MB) иҷозат дода шудааст, дохил намоед" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Алоқаи ноқилӣ" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "Корванд" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Пеш аз барқароршавӣ василаи эҳтиётии навро мавриди истифода қарор диҳед " "(танҳобарои василаҳои эҳтиётии зиёдшаванда.)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid бемуваффақият анҷом ёфт" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "Ном" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Намунаи тугмачаи сеюм" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "Тафтиши иловаҳо/барҳам додани файлҳои sgid." #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "Файлҳо фиристода шуда истодааст..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Исроилӣ (фонетикӣ)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "роҳ ба воситаҳои rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Шумо бояд чопгар/дастгоҳро интихоб/дохил намоед!" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "Муаммо бо ҳуқуқи дохилшавӣ ба CD." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Рақами телефон" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Хатогӣ: сахтафзори \"%s\" барои харитаи овозии шумо дар рӯйхат нест " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "Номи чопгар, тавсиф, ҷойгиршавӣ" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "ИМА (радиошунавонӣ)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Истифодаи пасванди Xinerama" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "Аврупои Ғарбӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "Дар CD-R" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" "[ИНТИХОБ] [НОМИ_БАРНОМА]\n" "\n" "ИНТИХОБ:\n" " --help - ин пайғоми ёридиҳандаро чоп намоед.\n" " --report - барнома бояд аз қуттии mandrake tools бошад\n" " --incident - барнома бояд аз қуттии mandrake tools бошад" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "Нусхаи Harddrake2 %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "Имтиёзҳо" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Свозиланд" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Думникин" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "Нусхабардории %s" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "Ранг интихоб кунед" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "Суриягӣ" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "Set-UID" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "Диски сахтеро, интихоб намоед, ки шумо онро барои офаридани қисми Mandrake " "Linux\n" "дур намудан мехоҳед. Эҳтиёт шавед, ки дар он ҳамаи додаҳои мавҷуд буда гум " "хоҳад\n" "шуд ва он барқарор намегардад!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" "Барои интихоби элемегнтҳои рӯшаншуда %c ва дагмаҳои %c-ро истифода баред." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Муши Стандартӣ бо 2 Дагма" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Барои иҷро намудани файл \"%s\"-ро дохил намоед" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Сараввал бобҳои мантиқиро дур намоед\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Элементи рӯшаншуда дар %d сония афтоматикӣ худбор хоҳад шуд." #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "etc/sysconfig/bootsplash-ро навишта намешавад\n" "Файл ёфт нашудааст." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Роҳ ба Интернет" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "ҳамоҳангии у-и оинаи матнӣ\n" "ба миқдори нишонаҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Барои гирифтани рӯйхати интихобҳое ки ба чопгари мазкур дастрас аст ба " "тугмачаи \"Рӯйхати интихобҳои чоп\" ангушт занед." #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Хидматрасонҳо ба кор андохта мешавад..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Саҳифаи санҷишӣ чоп шуда истодааст..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Аллакай бахш бо нуқтаи васли %s ҳаст \n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Баъд ҳар як соат тафтиши бехатарии msec-ро дохил/хориҷ намоед." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "Дар ин ҷо шумо бояд интихоб кунед, ки дар кадом ҷои сахтгардони худ шумо\n" "мехоҳед системи омили Mandrake Linux-ро коргузоштан мехоҳед.Агар\n" "сахтгардони шумо холӣ ё системи омили вуҷуддошта ҳамаи ҷои дастрасро\n" "истифода бурда истода бошад шумо бояд онро тақсим кунед.Асосан тақсимкунии\n" "сахтгардон аз ҷудокунии он, барои офаридани ҷой барои коргузориши ситеми\n" "нави Mandrake Linux-и шумо иборат мебошад.\n" "\n" "Аз барои он ки равиши тақсимкунӣ одатан бебозгашт аст, тақсимкунӣ барои\n" "корванди бетаҷриба метавонад пурҳарос ва даҳшатнок бошад.Хушбахтона, онҷо\n" "устоде, ки равишро содда мекунад вуҷуд дорад.Пеш аз саркунӣ, бо раҳнамо\n" "маслиҳат карда ввақти худро гиред.\n" "\n" "Агар шумо коргузоришро дар усули Мутахассис кор андохта истода бошед, шумо " "ба\n" "DiskDrake, асбоби бахшкунии Mandrake Linux, ки хуб мизонкунии бахшҳои " "шуморо\n" "иҷозат медиҳад, хоҳед даромад. Порчаи DiskDrake-и раҳнаморо бинед. Аз " "интерфейси\n" "короандозӣ, шумо метавонед устодҳоро, чунонеки инҷо тавсиф шудааст, бо " "ангушт\n" "зании дагмаи \"Устод\" дар муколама, истифода баред.\n" "\n" "Агар бахшҳо аллакай муайян шудаанд, новобаста аз коргузориши пештара ё аз " "асбоби\n" "бахшкунии дигар, танҳо онҳоеро ба системи Linux-и худ коргузоштан мехоҳед\n" "интихоб кунед\n" "\n" "Агар бахшҳо муайян нашуда бошанд, шумо бояд устодро истифода бурда онҳоро\n" "офаред. Вобаста ба шакли сахтгардони шумо, якчанд хосиятҳо дастрасанд:\n" "\n" " * \"Истифодаи ҷои холӣ\": ин хосият танҳо ба бахшкунии гардон(ҳо)и холии " "шумо\n" "хоҳад бурд. Баъд ба шумо ёрӣ расонида намешавад.\n" "\n" "” * \"Истифодаи бахши вуҷуддошта\": устод як ё якчанд бахшҳои Linux-и дар\n" "сахтгардони шумо вуҷҷуддоштаро муайян кард. Агар шумо онҳоро истифода " "бурдан\n" "хоҳед ин хосиятро интихоб кунед\n" "\n" " * \"Истифодаи ҷои холӣ дар бахши Widows\": агар Microsoft Windows дар\n" "сахтгарджони шумо коргузошта шуда ҳамаи ҷои холии дастрасро гирифта бошад,\n" "шумо бояд ҷои холӣ барои додаҳои Linux офаред. Барои ин корро кардан шумо\n" "метавонед додаҳо ва Micrisoft Windows-ро нобуд кунед (нигаред ба ҷавобҳои \n" "\"Кӯр кардани тамоми диск\" ё \"Усули мутахассисӣ\") ё бахши\n" "Micrisoft Windows-ро бозандоза кунед. Бозандоза кунӣ метавонад бе ягон\n" "талафи додаҳо гузарад. Ин ҷавоб дар ҳолате тавсия мешавад, ки агар шумо ҳам\n" "Mandrake Linux ва ҳам Microsoft Windows-ро дар як компютер истифода бурдани\n" "хоҳед.\n" "\n" " Пеш пз интихоби ин хосият, лутфан бифаҳмед, ки пас аз ин амалиёт,\n" "ҳаҷми бахши Microsoft Windows-и шумо назар ба ҳозира хурдтар зоҳад буд.\n" "Шумо ҷои холии кам таҳти Microsoft Windows, барои нигоҳ доштани додаҳои\n" "худ ё коргузориши нармафзори нав, хоҳед дошт\n" "\n" " * \"Кӯр кардани тамоми диск\": агар шумо хоҳед, ки ҳамаи додаҳо ва бахшҳои\n" "дар сахтгардони худ вуҷуддоштаро нобуд карда онҳоро бо системи нави\n" "Mandrake Linux-и худ иваз кунед, ин хосиятро интихоб кунед.Бо ин ҷавоб\n" "эҳтиёт бошед, чунки баъд аз тасдиқ кардан шумо онро баргардонида " "наметавонед.\n" "\n" "” !! Агар шумо ин хосиятро интихоб кунед, ҳамаи додаҳо дар диски шумо гум\n" "хоҳад шуд.\n" "\n" " * \"Хориҷи Windows\": Ин ҳамту ҳамаашро дар гардони шумо кӯр карда аз нав " "оғоз\n" "мекунад, ҳама чизро аз сиёҳнавис бахш хоҳад кард. Ҳама додаҳо дар диски шумо " "гум\n" "хоҳад шуд.\n" "\n" " !! Агар шумо ин хосиятро интихоб кунед, ҳамаи додаҳо дар диски шумо гум\n" "хоҳад шуд.\n" "\n" " * \"Усули мутахассисӣ\": агар шумо хоҳед, ки сахтгардони худро дастӣ бахш\n" "кунед ин хосиятро интихоб кунед. Оҳиста бошед - ин интихоби пурқувват вале\n" "хатарнок мебошад. Шумо метавонед бо осонӣ ҳамаи додаҳои худро талаф\n" "диҳед. Барои ҳамин инро то он даме, ки шумо чӣ кор карданатонро надонед,\n" "онро интихоб накунед." #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Украина" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "Илова:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Модеми берунаи ISDN" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" "агар yes муқаррар шуда бошад, онгоҳ дар хусуси натиҷаҳои тафтиш бо почта " "хабардиҳед." #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Чиро интихоб менамоед? (пешфарз %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "Ҷустуҷӯ ва барҳам додани камбудӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Саҳифаи санҷишӣ ба чопгар фиристода шуд.\n" "Мумкин пеш аз кор кардани чопгар як вақти муаяйн талаб карда шавад.\n" "Ҳолати чоп:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "ҳаррӯза" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "ва як чопгари номаълум" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "Ирлонд" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " Ба танзимдарории барқароршавӣ " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "Ин гузориши дуруст аст?" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Агар шумо хоҳед, ки компютери худро ба Интернет ё ба шабакаи маҳаллӣ\n" "пайваст кардан хоҳед, хосияти дурустро интихоб кунед. Илтимос, пеш аз\n" "интихоби хосияти дуруст, дастгоҳи худро дар гиронед,то ки DrakX онро ба\n" "таври автоматикӣ муайян кунад.\n" "\n" "Mandrake Linux танзимдарории пайвастшавии Интернетро дар вақти коргузориш\n" "пешниҳод мекунад. Пайвастшавиҳои дастрас: модеми муқаррарӣ, модеми ISDN,\n" "пайвастшавии ADSL, модеми ноқилӣ, ва дар охир пайвастшавии оддии LAN\n" "(Ethernet).\n" "Инҷо мо Ҳар як танзимдарориро муфассал намекунем. Танҳо мӯхтақид шавед, ки\n" "шумо ҳамаи параметрҳоро аз Таъмингари Хадамоти Интернет ё идоракунандаи\n" "систем доред.\n" "\n" "Барои муфассалӣ шумо метавонед ба пораи раҳнамоӣ доир ба пайвастшавии\n" "Интернет, др бораи шкл муроҷиат кунед, ё ҳамту то коргузошта шудани системи\n" "шумо интизор шуда барномаи онҷо тавсиф шударо барои коргузориш истифода\n" "карда метавонед.\n" "\n" "Агар шумо хоҳед, ки шабакаро баъдтар баъди коргузтриш танзим додан хоҳед ё\n" "агар шумо танзимдарории пайвасти шабакаи худро тамом карда бошед,\n" "\"Бекор кардан\"-ро ангушт занед." #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "Танзимдарории Устод" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Худсанҷиш" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "агар ҳа интихоб шуда бошад, онгоҳ тафтиш менамояд:\n" "\n" "- гузарвожаҳои холиро,\n" "\n" "- ба набудани гузарвожа дар /etc/shadow\n" "\n" "- ба мавҷуд будани ғайри-root-и корвандон бо UID 0." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "Файлҳои системӣ нигоҳ дошта мешавад..." #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Бе азозили NIS радиошунавоиро ба роҳ монда намешавад" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "Хориҷкунии чопгар \"%s\"..." #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "Андозаи таърихи Shell" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Лутфан, ҷое ки дар он файли auto_install.cfg мавҷуд аст, нишон диҳед.\n" "\n" "Онро холӣ нигоҳ доред, агар шумо хоҳиши барпо сохтани усули кор " "гузорииавтоматиро дошта бошед.\n" "\n" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on other machines" msgstr "Дар дигар мошинаҳо танзим шудааст" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "сатҳи ахбороте ки ба воситаи дастурамали cpuid гирифтан мумкин аст" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Перу" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr " дар дастгоҳи: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Windows(TM)-ро хориҷ намоед" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Хидматрасони ҳуруфҳои X-ро оғоз намоед (ин барои ба кор андохтани XFree " "ҳатмӣ аст)." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Аксарияти ин қиматҳо аз системи кории\n" "шумо гирифта шудааст.\n" "Агар лозим шавад шумо онҳоро иваз карда метавонед." #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" "Файли ҳуруф ё ин ки феҳристро интихоб намоед ва ба 'Илова намудан' ангушт " "занед" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Мадогоскор" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "Cron минбаъд бе ҳуқуқи root дастрас намебошад" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "Систем" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "Шумо ин хислатро истифрда бурдан мехоҳед?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "Арабӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Хосиятҳо:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "Гузарвожа талабкарда мешавад" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d дақиқа" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Карти графикӣ: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "Гузориши WebDAV бемуваффақият анҷом ёфт!" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Шоакли XОзод" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Фаъолиятро интихоб кунед" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Пулинезияи Фаронса" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "Ба таври пешфарз, DrakX фарз мекунад, ки шумо муши дудагмагӣ доред ва онро\n" "барои тақлидкунии сеюм дагма гузориш хоҳад кард. DrakX ба таври автоматикӣ\n" "хоҳад донист, ки он PS/2, сериол ё муши USB аст.\n" "\n" "Агар шумо хоҳед, ки навъи дигари мушро муайян кунед навъи муносибро аз " "рӯйхати\n" "таъмиршуда интихоб кунед.\n" "\n" "Агар шумо муши аз пешфарз дигарро интихоб кунед, ба шумо экрани санҷиши муш\n" "номоиш дода мешавад. Дагмаҳо ва чархро истифода бурда муайян кунед, ки оё\n" "гузориш дуруст аст. Агар муш дуруст кор накарда истода бошад, пкнели " "фосиларо\n" "пахш кунед ё БАРГАШТАН-ро барои \"Бекор кардан\" ва аз нав интихоб кунед." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Дастгирии win-чопгарҳои OKI 4w ва мувофиқ." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Файлҳо ё wildcards, ки дар файли .backupignore дар қисми болоии дарахти " "феҳристҳо оварда шудааст дар нусхаҳои эҳтиётӣ нигоҳ дошта намешавад." #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Системи овоздори ALSA-ро оғоз намоед (Меъмории баланди овозии Linux)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Коргузориши гардон барои %s карти %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Шумо чопгари худро, ки пештар аз рӯи пешфарз истифода бурдед гузаронидед (\"%" "s\"). Онро бояд аз рӯи пешфарз дар системи нави чоп истифода намуд %s?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "Даргиронидани Хидматгор" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Украинӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Роҳ ба шабака ба даст дароварда нашудааст ва оғоз карда намешавад. Лутфан, " "танзимгар ва сахтафзори худро тафтиш намоед. Сониян кӯшиши ба танзим " "даровардани чопгари дури худро ба роҳ монед." #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Барои навиштани \"%s\" файл иҷозат додан" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Лутфан, дискети худборшавиро ба гардони %s дохил намоед" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "Шабака(ҳо)-и маҳаллӣ" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "Хориҷи Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "%s-и шумо ба танзим дароварда шуд.\n" "Акнун шумо метавонед бо ёрии \"XSane\"аз менюи иловаҳои бисёрмуҳита/График " "ҳуҷҷатҳоро пуйиш намоед." #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "Назоратчиёни Firewire" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "Баъд аз он ки шумо параметрҳои асосии боркунандаи авваларо ба танзим " "медароред\n" "рӯйхати намунаҳои худборшаве ки ҳангоми оғоз намудан дастрас аст, нишон " "дода\n" "мешавад.\n" "\n" "Агар ба мошинаи шумо дигар системҳои операсионӣ коргузорӣ шуда бошад, онгоҳ\n" "онҳо ба таври автоматӣ ба менюи боркунӣ илова карда мешавад. Шумо метавонед\n" "ба таври аниқ ба воситаи пахши \"%s\" параметрҳои вуҷуддоштаро барои " "офаридани\n" "элементи навро тартиб диҳед; \"%s\" ё \"%s\"-ро пахш намуда онро тағир ё " "хориҷ\n" "менамоед. \"%s\" тағироти шуморо тасдиқ менамояд\n" "\n" "Инчунин шумо мехоҳед роҳи ба системҳои операсионӣ ба онҳое ки то нозиргоҳ\n" "мерасанд ва ин мошинро ба кор меандозанд пешниҳод намоед. Дар ин ҳолат шумо\n" "метавонед элементҳои мувофиқро хориҷ намоед, лекин ба шумо корандози\n" "худборшав барои худбор намудани ин системҳои операсионӣ лозим мегардад !" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Усули системи" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Барои чоп намудан дар чопгари NetWare, шумо бояд номи хидматрасонро нишон " "диҳед (Дар хотир дошта бошед! Он метавонад аз номи соҳибии TCP/IP фарқ " "намояд!), ва инчунин номи вазифаҳои навбатӣ барои чоп намудан дар чопгаре ки " "ба он шумо хоҳиши роҳ доштанро доред ва номи дилхоҳи қобили қабули корванд " "ва гузарвожа." #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Ниқоби шабакавӣ:" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "Онро баъд иҷро намоед" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Пайваст" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Рӯйхати чопгарҳоро нав намоед (ҳамаи чопгарҳои CUPS дури дастрасро нишон " "диҳед)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Вақте ки ин интихоб ба кор дароварда шудааст, ҳангоми ҳар вақт сар додани " "CUPS он ба таври автоматӣ месанҷад, ки агар LPD/LPRng коргузорӣ шуда бошад, " "онгоҳ/etc/printcap ба CUPS аз сари нав навишта намешавад\n" "\n" "- агар /etc/cups/cupsd.conf, мавҷуд набошад, онгоҳ он ташкил хоҳад шуд\n" "\n" "- вақте ки ахборот оиди чопгар ба воситаи шабака дода мешавад, онгоҳ он " "\"localhost\"-ро ба сифати номи хидматрасон надорад.\n" "\n" "Агар як қатор ин тафтишот боиси муаммои шумо шуда бошад, онгоҳ ин интихобро " "хомӯш намоед. Лекин дар ин ҳолат худи шумо дар бораи ин нуқтаҳо бояд ғамхорӣ " "намоед." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Мувофиқи хоҳиш коргузории автоматӣ мумкин ба таври\n" "пурра автоматикона мешавад\n" "дар ин ҳолат он диски сахтро нусхабардорӣ хоҳад намуд!!\n" "(ба коргузорӣ намудан ба дигар компютер пешбинӣ шудааст).\n" "\n" "Мумкин, шумо коргузории такрориро афзалтар шуморед.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Чопгари шабакави \"%s\", даргоҳ %s" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Лутфан, созгори шабакавиро ки ба шабакаи маҳаллаи шумо васл мегардад, " "интихоб намоед." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "OK барои барқарор намудани дигар файлҳо." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "Лутфан, ороиши забонакро интихоб кунед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "Дастгоҳи Чопгари URI" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "Муҳити хориҷ нашаванда!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Дар асоси поёна" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Ҳимояро ба IP spoofingба Роҳ монед/Намонед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Коргузории системи чоп бо %s сатҳи бехатарӣ" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "Ин номи корванд хеле дароз" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Дигар СО (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "Сайти дури WebDAV аллакай ҳангома мешавад!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Манбаи маълумоти чопгарҳо хонда мешавад..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Дискети коргузории автоматиро офаридан" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t номи корванд: %s\n" "\t\t дар феҳристи: %s \n" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Сомали" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "Ронанда бо сарчашмаи аввалаи кушода мавҷуд нест" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "Def." #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Ин сатҳ ба пешина монанд аст, лекин систем ба таври пурра маҳкам аст ва " "хислатҳои бехатарӣ дар бузургии калонтарин мавҷуд мебошад." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Никорогуе" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Калиднрияи Нав" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "Протоколи аврупоӣ (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/_Нобуд кардан" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Усули видео" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Оман" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "Лутфан. дар поён суроғаи электронии худро дохил намоед " #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "Назорати Шабака" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Ҳаҷми нав дар МБ: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Навъи ҷадвали бахшҳо: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "Муаяйн намудани ҳақиқати Соҳибии Windows" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "Забонаки америкоӣ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Намунаи дагмаҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", чопгари шабакаи \"%s\", даргоҳ %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Drakbackup дар лента иҷро мешавад:\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Муаммои алоқаи FTP. Файлҳои эҳтиётии шуморо бо FTP фиристодан мумкин нест.\n" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "Суръати Фиристониш:" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Санҷиши классикии хатогиҳои овоз ба воситаи сар додани фармонои зерин " "иҷромешавад:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" ба шумо хабар медиҳад, ки кадом ронанда " "харитаишуморо аз рӯи пешфарз истифода мебарад\n" "\n" "- \"grep sound-slot /etc/modules.conf\" ба шумо хабар медиҳад, ки кадом " "ронанда\n" "ҳоло истифода мегардад\n" "\n" "- \"/sbin/lsmod\" ба шумо имкон медиҳад санҷед, ки оё модул (ронанда) ба кор " "андохташудааст\n" "\n" "- \"/sbin/chkconfig --list sound\" и \"/sbin/chkconfig --list alsa\"\n" "ба шумо хабар медиҳад хидматрасонҳои sound мавҷуд буданд ва alsa барои оғоз\n" "намудан дар initlevel 3 ба танзим дароварда шудааст ё ин ки не\n" "\n" "- \"aumix -q\" ба шумо хабар медиҳад, ки баландии садо ба роҳ монда шудааст " "ё не\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" ба шумо хабар медиҳад, ки кадом барнома " "харитаиовоздорро мавриди истифода қарор додааст.\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Хатогии Halt" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "Танзимдарории огоҳиномаи пост" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Токелау" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "Мувофиқкунӣ" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "Босниягӣ" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "Нашр: " #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Суръати алоқа" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Намибиё" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "манъаи серверо" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" "имконияти махсуси ронанда (қобилияти даргиронидан ё ин ки дастгирии DVD)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Қисмро ба _илова карда наметавонад, ки_шаклбандӣ шудааст_ RAID md%d" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Аз рӯи қарордоди шабакавӣ барқарор намудан: %s" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "“Карти шумо метавонад пуштибони шитоби сахтафзори 3D-ро дорад вале танҳо бо " "XОзод %s.\n" "”“ДАР НАЗАР ДОРЕД, КИ ИН ПУШТИБОНИ ТАҶРИБАВӢ АСТ ВА МЕТАВОНАД СИСТЕМИ ШУМОРО " "ФАЛАЧ КУНАД.\n" "”“Карти шумо бо XОзод %s пуштибонӣ шудааст, ки пуштибони беҳтарро дар 2D " "дошта метавонад.”" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "Лутфан, мунтазир шавед, ки интихобҳои бехатарӣ ба роҳ монда мешавад..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "|CPH05X (bt878) номаълум[аксарияти истеҳсолкунандагон]" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Сардиҳии вазъияти графикӣ ҳангоми оғози системи худ" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "ҳар соат" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "Калиди рости Shift" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr " бомуваффақият барқарор шудааст дар %s " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "Даргоҳи чопгар барои CUPS дастрас мегардад..." #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Антигуа ва Борбудо" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Муаяйн шудааст, ки гузарвожаи манбаи маълумоти систем аз\n" "гузарвожаи манбаи маълумоти Terminal Server фарқ дорад.\n" "Хориҷ намоед ё ин ки боз корвандро ба Terminal Server илова намоед, то " "киноми дохилӣ фаъол гардад." #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Испанӣ" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "Оғоз" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "Дохилшавии бевосита дар зери root" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "Танзимдарории замимаҳо..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Марҳамат намоед ба Устози Барпонамоии Чопгар\n" "\n" "Ин устоз ба шумо имкон медиҳад, то ки шумо чопгарҳоро коргузорӣ намоед, киба " "ин компютер пайваст аст, бевосита ба шабака ё ин киба мошинаҳои дури " "Windows васл мебошад.\n" "\n" "Агар чопгаре ки шумо доред ба ин мошина пайваст бошад, лутфан кабели онро ба " "ин компютер васл намоед ва қувваро ба кор андозед, то ки онҳо ба таври " "автоматӣмуаяйн гардад. Чопгарҳои шабакавии шумо ва чопгарҳо дар Windows-" "мошинаҳо инчунин бояд пайваст бошад.\n" "\n" "Дар хотир дошта бошед, ки муаяйн намудани автомати чопгархои шабакавӣ хеле " "дуртар иҷро мегардад назар ба муаяйн намудани автоматии чопгарҳое ки танҳо " "ба ин мошина васл шудааст. Барои ҳамин ҳам автомуаяйн намудани чопгарои " "шабакавиро дарWindows-мошинаҳо хомӯш намоед, агар онҳо ба шумо лозим " "набошад.\n" "\n" "\"Навбатӣ\"-ро пахш намоед, вақте шумо тайёр ҳастед ва \"Бекор кардан\" , " "агаршумо ҳозир чопгарро ба кор дароварданӣ бошед." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Алоқаи муқаррарии модемӣ" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "Интихоби Файл" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "Пеш аз офаридани нусхаи эҳтиётӣ лентаро тоза намоед" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "Воситаи танзимдарориро оғоз намоед" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Коргузориши корандози худборшав" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Андозаи қисми решагӣ дар MB: " #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Ин қуттии зарур мебошад, онро бекор карда намешавад" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" " - Ташкил менамояд etherboot дискет/CD:\n" " \t\tба мошинаҳо - мизоҷони бедиск тасвирҳои ROM дар NIC,ё дискетҳои " "худборшав лозим аст\n" " \t\tё CD барои омодасозии худборшавӣ. drakTermServ ба шумо кӯмак " "менамояд, то ки чунин тасвирҳоро офаред,\n" " \t\tасос шудааст дар NIC дар мошинаи мизоҷӣ.\n" " \t\t\n" " \t\tМисоли асосии ба таври дастӣ офаридани диски худборшавӣ барои " "3Com 3c509:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "Тасвири шабакавии худборшавии ISO %s" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) номҳои соҳибии корванде ки барои тағир додани номҳои соҳибӣ дар " "IP-суроғаҳо истифода мешавад." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Синт Лусиё" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "Ноября" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Хомӯш намоед..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "Маърӯза" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Палау" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "савия" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" "Ҳамаи воқеаҳо аз ҷониби яке аз мутахассисони техникии аълои MandrakeSoftдида " "баромад мешавад" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Интихоби Гурӯҳи Қуттиҳо" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Ба танзимдарории сахтафзори маҳаллӣ\n" "иҷозат дода шавад." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Аз рӯи қарордоди шабакавӣ барқарор намудан: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "Дар ин ҷо шумо метавонед ҳар як параметри модулро ба танзим дароред." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Ҳалнокӣ ва чуқурии рангро интихоб кунед" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "Дагмаи сеюмро намунасозӣ кардан?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Шумо метавонед қисми навро тартиб диҳед\n" "(шумо миқдори зиёдтарини қисмҳои авваларо ба даст даровардаед).\n" "Сараввал қисми авваларо хориҷ намоед ва қисми васеъшударо тартиб диҳед." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Васл кунӣ" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "Офаридани дискети коргузории автоматӣ" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "Кор гузоштани навигариҳо" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "баландии оинаи матнӣ" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Ҳолат" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Боварӣ ҳосил намоед, ки расона дар дастгоҳ мавҷуд аст %s" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Дар гиронидани тахассусҳои бисёр" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Дар системи файлӣ дастгоҳҳои блокии рамзнок ё ин ки махсусро маънидод " "накардан." #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Ин интихобҳо ҳамаи файлҳоро дар феҳристи шумо метавонад нигоҳ дорад ва " "барқарорнамояд/etc.\n" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Чопгари маҳаллӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "Файлҳо Барқарор шуданд..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Интихоби қуттӣ" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Мавритонӣ" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Ман метавонам танзимдарории ҳозираи шуморо нигоҳ дорам ва тахмин намоям, ки " "шумо аллакай хидматрасони DHCP-ро барпо намудед; дар ин ҳолат лутфан, " "санҷед, ки оё ман намуди шабакаро дуруст хонда баромадам, ки шумо онро барои " "шабакаи маҳаллии худ мавриди истифода қарор додед; ман аз сари нав онро ба " "танзим намедарорам ва ба танзимдарории хидматрасони DHCP-и шумо кордор " "нестам.\n" "\n" "Мувофиқи пешфарз Хидматрасони DNS похидматрасони паҳнкунандаи номҳое " "мебошад, ки ба воситаи firewall ба танзим дароварда шудааст. Шумо метавонед " "ин хидматрасонро бо IP-и суроғаи DNS-и провайдери хизмати интернети худ иваз " "намоед, масалан.\n" "\t\t \n" "Ё ин ки ман метавонам интерфейси шуморо аз сари нав ба танзим дарорам ва " "барои шумо хидматрасони DHCP-ро (аз сари нав) мавриди танзимдарорӣ қарор " "диҳам.\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Чопгари маҳаллӣ ёфт нашуд! Барои ба таври дастӣ коргузорӣ намудани чопгар " "номи дастгоҳ/номи файлро дар сатри дохилшавии додаҳо (даргоҳҳои параллелӣ) " "дохил намоед: /dev/lpt0, dev/lpt1, ..., мувофиқат мекунад ба LPT1:, " "LPT2:, ..., чопгари якум USB: /dev/usb/lp0, чопгари дуюм USB: /dev/usb/" "lp1, ...)." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Ҳамаи бахшҳои аввала истифода шудааст" #: ../../printer/main.pm:1 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD хидматрасон \"%s\", чопгари \"%s\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Баъди аз ин ба шумо тавсия медиҳем, то ки шумо аз сари нав муҳити Х-и худро " "оғоз намоед, то ки ба муаммоҳое ки бо ивазшавии номи соҳибӣ вобаста аст, " "дучор нагардед." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Дарки автоматӣ ва ба танзимдарории таҷҳизот ҳангоми худборшавӣ." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "Танзимдарории Хидматрасони Коргузориш" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "IDE ба танзим дароварда мешавад" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "Имконияти функсионалии шабака ба танзим дароварда нашудааст" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "Танзим додани модул" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Ҷазоири Кокос" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Пеш аз ҷой гирифтани таъғирёбиҳо шумо бояд боз худбор шавед" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Рақами телефонии таҳиягар" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "Соҳиб %s" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Фиҷи" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Арманистон" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Дискет гардони дуюм" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "Дар бораи Harddrake" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Ба TCP пайвастшавии X Window иҷозат додан" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "Ғунҷоиши ронанда" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "исето ба гардон дохил кунед\n" "Ҳама додаҳо дар дискет гум хоҳад шуд" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Ҳаҷм: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Калиди Control ва Shift дар як вақт" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "дуюмдараҷа" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "Назари Танзимдарории Нусхаи Эҳтиётӣ" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" "агар yes муқаррар шуда бошад, онгоҳ дар бораи натиҷаи санҷиш дарsyslog хабар " "диҳед." #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Гузарвожа нест" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Ниҷириё" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s номи соҳибиро талаб менамояд...\n" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Барои истифодабарӣ ягон қисми мавҷудбуда нест" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Сканерҳои зерин\n" "\n" "%s\n" "дар системи шумо дастрас аст.\n" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Дастгоҳи бисёрвазифагӣ дар даргоҳи параллелӣ #%s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Барои чоп намудан дар чопгари TCP ё socket шумо бояд номи соҳиб ё ин киIP-" "суроғаи чопгар ва номи ғайриҳатмии даргоҳро нишон диҳед(аз рӯи пешфарз " "баробараст ба 9100). Дар хидматрасонҳои HP JetDirect рақами даргоҳ одатан ба " "9100 баробар аст, дар дигар хидматрасонҳо он метавонад фарқ намояд. " "Дастуамали истифодаи таҳҷизоти худро дида бароед." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "Маълумоти сахтгардон" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Русӣ" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "Урдон" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "Руст кардани файлҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "" "Ба таври автоматӣ чопгарҳое ки ба ин мошин васл шудааст, муаяйн менамояд" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Мебахшед, ягон дискет гардон мавҷуд нест" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Буливи" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Хидматрасони Windows-и худро ҳамин тавар барпо созед, ки мувофиқи қарордоди " "IPPдастрас бошад. Сониян дар Printerdrake чопро аз ин мошин бо намуди " "пайвасти \"%s\" ба роҳ монед.\n" "\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Қуттии бад" #: ../advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "Мошини худро ба хидматрасони бузург Linux табдил диҳед танҳо ба воситаи " "пахши муш ба Web server, mail, firewall, router, file and print server (ва " "ғайра.)" #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "Хосиятҳои Асосии DrakSec" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Эзоҳ: агар шумо харитаи овозноки ISA PnP-ро дошта бошед, онгоҳ шумо бояд " "барномаиsndconfig-ро истифода баред. Танҳо дар нозиргоҳ \"sndconfig\"-ро " "нишон диҳед." #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Руминия" #: ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "Гурӯҳ" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Канада" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "дастгоҳ инхоб кунед" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Хориҷ аз LVM" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Минтақаи соатӣ" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Олмонӣ" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "Навбатӣ ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Ин интихоб имкон медиҳад, то ки матни оддиро ба забони японӣ чоп намоед. " "Онро танҳо дар он вақтистифода баред, ки шумо дар ҳақиқат матнеро ба ин " "забон чоп карданӣ бошед. Агар ин интихоб дохил шуда бошад, онгоҳ шумо " "рамзҳоро бо аломатҳои зада бо ҳарфҳои лотинӣ чоп карда наметавонед, инчунин " "майдон, андозаи ҳарфро мураттаб сохта наметавонед. Ин барпосозӣ танҳо ба он " "чопгарҳое ки дар ин мошин муаяйн гардидааст, истифода бурда мешавад. Агар " "шумо хоҳиши чоп намудан ба забони японӣ бошед, онгоҳ шумо бояд ин интихобро " "дар мошин хориҷшуда дохил намоед." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Имкониятҳо, ин бахш\n" "бахши Гардон аст, шумо бояд\n" "инро ба ҳоли худ гузоред.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Гинеи Биссои" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Суръати навсозии уфуқӣ" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "Таҳрир кардан" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Нуқтаи васлшавиро гирифта намешавад, чунки ин қисм барои loop back истифода\n" "мегардад. Сараввал loopback-ро хориҷ намоед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "Шабакаи дар вақти коргузорӣ ба танзим дароварда шуда ҳоло ба кор андохта " "намешавад. Лутфан, тафтиш намоед, ки шабака баъд аз оғоз намудани системи " "шумо дастрас мегардад ва танзимдарориро бо ёрии Маркази Назорати Mandrake, " "қисми\"Шабака ва Интернет\"/\"Пайвастшавӣ\" ислоҳ намоед, баъд чопгарро ба " "кор сар диҳед, инчунин бо ёрии Маркази Назорати Mandrake, қисми \"Таҳҷизот\"/" "\"Чопгар\"" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "Назоратчиёни USB" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "Кадом намудро телевизори шумо истифода мебарад?" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Навъ:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Номи захираи умумӣ" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "дохил намудан" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Барои ба даст даровардани рӯйхати қуттиҳои дастрас пайвастшавӣ ба Mandrake " "Linuxweb site ба роҳ монда шудааст..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Ҳангоми аз сари нав оғоз намудани шабака муаммое пайдо шуд: \n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Файли loopback-ро хориҷ кунем?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Андозаи интихобшуда аз ҷои дастрасшуда зиёд аст" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "Номи хидматрасони NCP мавҷуд нест!" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "Лутфан мамлакати худро интихоб кунед." #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "Файлҳои диски сахт эҳтиёт карда мешавад... " #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "Лаосӣ" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Самоа" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Қарордоди rstat ба корвандони шабака имкон медиҳад, то ки\n" "онҳо додаҳоро оиди маҳсулнокии мошини дилхоҳ дар ин шабака дастрас намоянд." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Аз сари нав тартиб додани рӯйхати сканерҳои танзимшуда ..." #: ../../modules/interactive.pm:1 #, c-format msgid "Module configuration" msgstr "Танзимдарории Модул" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "Пуйишгар" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Огоҳӣ: санҷиши ин карто графикӣ компютери шуморо фалач карда метавонад" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "“Номи корванд бояд фақат аз ҳарфҳои хурд, рақамҳо, `-' ва `_' иборат бошад”" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Марҳамат ба Crackers" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Хосиятҳои модул:" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "Шабакаи худро ба воситаи Multi Network Firewall ҳимоя намоед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "Бе танзимдарории шабака давом додан" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Қатъ кардан" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "Дархости гузарвожа барои %s дар даргоҳи %s мавҷуд нест" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Муши Kensington Thinking бо намунаи чарх" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "Истифодаи пуйишгарҳои дурдаст" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Қисми Windows-и шумо бениҳоят тика гардидааст. Лутфан, компютери худро дар " "зери Windows аз сари нав оғоз намоед, ``defrag''-ро ба кор андозед ва сониян " "такроран коргузории Mandrake Linux-ро мавриди истифодабарӣ қарор диҳед." #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (норвеягӣ)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Диски Сахт Нигоҳ дошта мешавад..." #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Ба қисмҳо ҷудо карда намешавад: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Навъ:" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- Мизоҷро ба таҳрир даровардан" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "Ҳуруфҳо ёфт нашудааст" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Муш" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "дар /худборшавӣ ҷои кофӣ нест" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Лихтанштоин" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Номи соҳибӣ" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "ранги панели пешравӣ" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "Хориҷи Файлҳои Ҳуруфҳо" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Илова ба RAID" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "Шумо метавонед элементҳои иловагиро ба yaboot барои дигар системҳои\n" "операсионӣ,асосҳои интихобӣ ё барои тасвири худборшавии фалокатнокдохил\n" "намоед.\n" "\n" "Барои дигар системҳои операсионӣ элемент танҳо нишона ва қисми \"root\"-ро\n" "дорост.\n" "\n" "Барои Linux якчанд интихобҳои имконпазир мавҷуд аст:\n" "\n" " * Нишона: ин номест, ки шумо онро бояд дар сатри даъватии yaboot барои " "интихоби\n" "ин намуди худборшавӣ дохил намоед;\n" "\n" " * Симо: ин номи асоси худборшаванда мегардад. Одатан vmlinux ё варианти\n" "vmlinux бо васеъшавӣ;\n" "\n" " * Root: дастгоҳи \"root\" ё ``/'' барои кор гузоштани Linux-и шумо;\n" "\n" " * Илова: дар сахтафзори Apple интихоби илова ба асос тез-тез мавриди " "истифода\n" "қарор дорад, то ки ҳангоми пиёдасозии видео-сахтафзор кӯмак намояд ё дар " "забонак\n" "намунаи дагмаҳои мушро барои Apple-и дагмаҳои дуюм ва сеюм дар стандартҳои\n" "мавҷуд набудани мушон дохил намояд. Ҳоло як чанд мисолҳо пешкаш карда\n" "мешавад:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: ин интихоб истифода бурда мешавад ё барои ба кор андохтани " "модулҳои\n" "аввала, ки ҳоло дастгоҳи худборшавии дастрас намебошад ё барои ба кор " "андохтани\n" "симои ramdisk дар ҳолати худборшавии таъҷилӣ.\n" "\n" " * Initrd-size: аз рӯи пешфарз андозаи ramdisk, мувофиқи қоида,\n" "ба 4096 Кбайт баробар аст. Агар ба шумо лозим гардад, ки ramdisk-ро бисёртар " "ҷо\n" "ба ҷо намоед назар ба оне ки аз рӯи пешфарз дода шудааст, шояд ин интихоб\n" "истифода гардад.\n" "\n" " * Хониш-қайд: одатан қисми \"root\" сараввал танҳо барои хониш бардошта\n" "мешавад, то ки ба санҷиши системи файлӣ пеш аз аз они ки систем\n" "``зинда мешавад'' амалӣ намояд.Дар ин ҷо шумо метавонед пешакӣ ин интихобро\n" "муқаррар намоед;\n" "\n" " * NoVideo: агар видео-сахтафзор танҳо муаммогӣ намояд, онгоҳ шумо " "метавонед\n" "ин интихобро ҳангоми худборшавӣ дар ҳолати ``бе\n" "видео'' бо дастгирии худ амалӣ гардонед;\n" "\n" " * Аз рӯи пешфарз: ин элементро ҳамчун Linux аз рӯи пешфарз , ки ба воситаи\n" "пахши оддӣ ба ENTER дар сатри даъвати yaboot амалӣ мегардад, интихоб намоед\n" "Ин элемент ҳамчун ``*'', қайд хоҳад шуд, агар шумо [Tab]-ро барои дида " "баромадани\n" "варианти худборшавӣ пахш намоед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "Чопгари \"%s\" бо муваффақият ба Star Office/OpenOffice.org/GIMP илова карда " "шуд." #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "Дискет гардон мавҷуд нест!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Барои донистани интихобҳое ки барои чопгари мазкур дастрас аст, рӯйхати дар " "поён овардашударо хонед ё дагмаи \"Рӯйхати интихобҳои чоп\"-ро пахш намоед.%s" "%s%s\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Арабистони Саудӣ" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "Интернет" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Ба ҳар ҳол давом диҳем?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Агар чопгари шумо дар рӯйхат мавҷуд набошад, онгоҳ фарқкунанда(ба тасвири " "чопгарназар намоед) ё монандро интихоб намоед." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Чопгар" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "Якчанд дастгоҳ илова гардид:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Ҳандаса: %s силиндр, %s сар, %s сектор\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Чоп намудан дар чопгари \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow и /etc/hosts.deny аллакай ба танзим дароварда шудааст- " "тағир наёфтааст" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "Барқарор Аз Лента" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" "Барои фиристодани ҳисоботи bug ба дагмаи ҳисобот ангушт занед, ки аз рӯи он " "саҳифаи Anthill дар браузери шумо кушода мешавад,\n" "ки дар он шумо метавонед маълумоти дар боло зикршудароба сифати ҳисоботи " "bugборгузорӣ намоед." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Барои ба танзим даровардан тахассусро интихоб намоед" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" "Дарозии кӯтоҳтарини гузарвожа ва миқдори рақаму ҳарф дар қайдгоҳи болоӣ" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" "\n" "\n" "Номи соҳибии Zeroconf-ро бе нуқта дохил намоед, агар шумо\n" "хоҳиши истифодаи номи соҳибиро аз рӯи пешфарз надошта бошед." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "Аз файли танзимдарорӣ ба таври фаврӣ нигоҳ доштан" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Нуқтаҳои васлшавӣ бояд танҳо рамзҳои ҳарфу рақамро дошта бошад" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "Системи чопгар аз сари нав оғоз меёбад..." #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Маълумоти сахтафзорро бинед" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "Рӯз" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Соҳаи аввал дар базшбандии худборшавӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "Истеҳсолкунандаи чопгар, модел" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Чоп намудан бе навбат" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[ИНТИХОБҲО]...\n" "Танзимгари Хидматрасони поёнаҳои Mandrake\n" "--enable : дохил намудан MTS\n" "--disable : хомӯш кардан MTS\n" "--start : оғоз намудан MTS\n" "--stop : қатъ кардан MTS\n" "--adduser : корванди мавҷудбудаи системро илова намудан ба MTS(номи " "корванд талаб карда мешавад)\n" "--deluser : корванди мавҷудбудаи системро хориҷ намудан аз MTS(номи " "корванд талаб карда мешавад)\n" "--addclient : мошинаи мизоҷиро илова намудан ба MTS (талаб карда " "мешавад MAC-суроға, IP, номи симои nbi)\n" "--delclient : мошинаи мизоҷиро хориҷ намудан аз MTS (талаб карда " "мешавад MAC-суроға, IP, номи симои nbi)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "Ниқоби зершабака:" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" "Мӯҳлати истифодаи гузарвожаҳо ва давомнокии қайдҳои ғайрифаъолро " "муқаррарнамудан" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Кор андохтан" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "“Ду параметрҳои асосӣ ин суръати навсозии амудӣ, ки суръатест,\n" "”“дар кадоме тамоми экран нав карда мешавад, ва муҳимтаринаш суръати " "ҳамгомкунии \n" "”“уфуқист, ки суръатест дар кадоме хатҳои нуқтаснҷӣ намоиш дода мешаванд\n" "”“\n" "”“ХЕЛЕ МУҲИМ аст, ки шумо навъи монитори худро бо ҳудуди ҳамгомкуние, ки " "берун аз” “қобилиятҳои монитори шумо аст муайян накунед: шумо ба монитори " "худ зарар расонида” “метавонед.\n" "”“ Агар дар шубҳа бошед, гузориши кӯҳнаро интихоб кунед.”" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Иваз" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Фармонҳои \"%s\" ва \"%s\" инчунин имкон медиҳад то ки параметрҳои вазифаи " "алоҳидаи чопро тағир додан. Танҳо дар сатри фармонӣ интихобҳои лозимаро " "илова намоед, масалан, \"%s <файл>\".\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "Номи соҳиб, корванд ва гузарвожа лозим аст!" #: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "Дискетро дохил кунед" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV қарордоди наве мебошад имконияти ба таврӣ маҳаллӣ дастурамали " "корванди\n" "web-ро васл намуданро пешкаш менамояд ва онро ҳамчун системи файлии маҳаллӣ\n" "ёдрас менамояд(бо шарте ки корванди web ҳамчун корванди WebDAV ба танзим\n" "дароварда шудааст). Агар шумо хоҳиши илова намудани нуқтаҳои васлшавии\n" "WebDAV -ро дошта бошед, онгоҳ \"Нав\"-ро интихоб намоед." #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "нав" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" "Барои баровардани ахбороти syslog дар нозиргоҳи 12 иҷозат додан/манъ кардан" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "Оё шумо хоҳиши аз сари нав кӯшиш намуданро доред?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Устод" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "Таҳрири хидматрасони интихобшуда" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "Лутфан, дар куҷо нусхаи эҳтиёт карданро интихоб кунед" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Шумо бояд аз сари нав худборшавиро ба роҳ монед, то ки тағир додани қисмҳо " "амалӣгардад" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "Браузери паҳншавиро дохил накунед" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Тафтиши системи файлии %s бемуваффақият анҷом ёфт. Шумо хоҳиши ислоҳ " "намудани хатогиҳоро доред? (эҳтиёт шавед, чунки шумо метавонед додаҳоро аз " "даст диҳед)" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Лутфан, ороиши забонаки худро интихоб намоед." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Намунавӣ" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Лутфан навъи мушро интихоб кунед." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "Алоқа..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Ба танзим даровардани чопгар бемуваффақият анҷом ёфт \"%s\"!" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "танзимдода нашуда" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "Дар бораи" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Ба танзимдарории Proxies" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Оғоз: сектор %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "Ниқоб нест" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "Интерфейси шабака аллакай танзим шудааст" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "Имконияти дохилшавӣ ба дискет нест!" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Огоҳӣ: Нармафзори бепул аз патент зарурияти озод шуданро надорад, вале як " "миқдори\n" "Нармафзори бепул шояд дар мамлакати шумо патент дошта бошад.\n" "Масалан, размкушоҳои ба ҳайати MP3 дохилшаванда метавонад лисензияро барои\n" "истифодаи оянда талаб намояд (барои гирифтани маълумоти муфассал ба\n" "http://www.mp3licensing.com назар намоед).\n" "Агар шумо дар бораи ҳуқуқӣ будани патент барои худ боварӣ надошта бошед, " "онгоҳ\n" "онро бо қонунҳо маҳаллии худ муқоиса намоед." #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "Хидматгори Пост" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Лутфан дар бахш ангушт занед" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Дастгоҳи бисёрвазифагӣ дар HP JetDirect" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Линукс" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "Ба шумо рӯзи хуб таманно карда мешавад!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "Афзоиш %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Алоқаро ба Чопгар Интихоб намоед" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Нуқтасанҷии ТВ-каналҳо иҷро мегардад..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "Хатогӣ ҳангоми фиристодани файл ба воситаи FTP.\n" "Лутфан, танзимдарории FTP-и худро ислоҳ намоед." #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "Оғози Маҳдудаи IP:" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Азозили internet superserver (баъзан бо номи inetd) мувофиқи зарурият " "якчанд\n" "хидматрасонҳои интернетро оғоз менамояд. Он ба оғозшавии бисёрхизматрасонҳо, " "ба монандӣ telnet, ftp, rsh ва rlogin ҷавобгар аст. Қатъи inetd\n" "инчунин ҳамаи хизматрасонҳое ки ба он ҷавобгар аст, хомӯш мегардонад." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "Баландии панели иҷроиш" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Ба воситаи %s дар соҳиби %s нигоҳ доштан\n" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Оржонтин" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "Хидматрасони Номи Соҳибӣ" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "Сатҳи Бехатарӣ:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Нуқтаи васлшавӣ бояд сар шавад бо /" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "Дастгоҳи CD/DVD-и худро интихоб кунед" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "CUPS server" msgstr "X Хидматрасон" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "Хизматрасони Почтавии Postfix" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Нигоҳ надошта баромадан" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Яман" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "Ин маҳсулот дар MandrakeStore Web site мавҷуд аст." #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Барои интихоб бисёр чиз мавҷуд аст (%s).\n" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Муаяйн намудани ронандаи сахт" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Шумо ягон гурӯҳи қуттиҳоро интихоб накардед.\n" "Лутфан, коргузории пастарини дилхоҳатонро интихоб намоед:" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Ба шумо микробарномаи Alcatel лозим аст.\n" "Шумо метавонед онро бо дискет ё қисми Windows-и худ таъмин намоед,\n" "ё ин ки онро партофта сониян иҷро намоед." #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Лутфан, URL-и хидматрасони WebDAV-ро дохил намоед" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Тоҷикистон" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Қабул намудан" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "Тавсиф" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "Лутфан матни мухтасар дохил кунед" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Хатогии кушодани %s барои навиштан: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Навъи муш: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Карти шумо бо XОзод %s пуштибони шитоби сахтафзори 3D дошта метавонад." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Мониторро интихоб кунед" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Нишони холӣ иҷозат нест" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "Мальтиягӣ (UK)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Ман дигар бахшҳоро илова карда наметавонам" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Ҳаҷм дар МБ: " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Чопгари дар масофаи дур ҷойгиршуда" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "Илтимос, барои истифода забонро интихоб кунед." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "ОГОҲӢ: ин дастгоҳ пештар барои васлшавӣ ба интернет ба танзим дароварда шуда " "буд.\n" "Танҳо танзими ин дастгоҳро бе тағир нигоҳ доред.\n" "Тағироти майдонҳои дар поён додашуда ба таври пешакӣ ин танзимро муайян " "менамояд." #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Ман метавонам компютери шуморо чунин гузорам, ки автоматиткӣ як корванд " "дохил шавад." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "Дискет андозакунӣ" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "Чопгарҳои намунавӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Лутфан, чопгарро интихоб намоед, ки ба он бояд вазифа равона гардад ё ин ки " "номи дастгоҳ/номи файлро дар сатри даровардани додаҳо дохил намоед" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Сканерҳои ин мошин барои дигар компютерҳо дастрас аст" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "Соҳаи аввали бахши root" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "Гардонандаҳои интихобӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Лутфан, ҳамаи интихобҳои ба шумо лозимаро санҷед.\n" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Димоғи Верде" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "оё ин cpu хатогиро бо вергули Cyrix 6x86 дорад" #: ../../standalone/printerdrake:1 #, c-format msgid "Loading printer configuration... Please wait" msgstr "Корандозии танзимдарории чопгар... Интизор шавед" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "пештар дар Pentium-ҳо хатогиҳо мавҷуд буд ва ҳангоми рамзкушоии байт-рамзи " "F00Fба муаммо дучор мегардид" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Гуам" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Лутфан, даргоҳро интихоб намоед, ки ба он чопгари шумо пайваст аст ё номи " "дастгоҳ/номи файлро дар сатри даровардани додаҳо дохил намоед." #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Хосиятҳо/Санҷиш" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "Васлкунии бахши %s" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Номи корванд" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Кадом қисмро шумо барои Linux4Win истифода бурдан мехоҳед?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to missing %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Саҳифаҳои санҷиш" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "Номи қисми мантиқӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Рӯйхати додаҳо барои барқарор намудан:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "Тафтиши %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "Интихобҳои чопгари TCP/Socket" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Хотираи харитаи (DMA)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "Аз интернет алоқа канда шудааст" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Фаронса" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "Аз назар гузаронидан" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Туркиё" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Модул" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Иолоти Муттаҳида" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "Корванди umask" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Пешфарзи OS?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Танзимдарории мустақили ҳама сарлавҳаҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "Баромад дар %d сония" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Ғано" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "Хосиятҳои Пешрафта" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "Назари Танзимдарорӣ" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Дар ин ҷо шумо бояд бахш(ҳо)е, ки барои коргузориши системи Mandrake Linux-" "и\n" "шумо иштирок хоҳанд кард, интихоб кунед. Агар бахшҳо аллакай муайян шуда\n" "бошанд, ё аз коргузориши пештараи GNU/Linux ё аз асбоби бахшкунии дигар\n" "шумо бахшҳои вуҷуддоштаро истифода бурда метавонед. Дар ҳолати дигар\n" "бахшҳои сахтгардон бояд муайян шаванд.\n" "\n" "Барои офаридани бахшҳо шумо аввал бояд сахтгардонро интихоб кунед. Шумо\n" "метавонед дискро барои бахшкунӣ бо ангуштзании \"hda\" барои гардони\n" "аввали IDE, \"hdb\" барои дуюм, \"sda\" барои гардони аввали SCSI ва " "монанди\n" "ҳамин интихоб кунед.\n" "\n" "Барои бахшкунии сахтгардони интихобшуда шумо метавонед ин хосиятҳоро\n" "истифода баред:\n" "\n" " * \"Тоза кардани ҳамааш\": ин хосият тамоми бахшҳоро дар гардони " "интихобшуда\n" "нобуд хоҳад кард.\n" "\n" " * \"Худғунҷонӣ\": ин хосият ба шумо ёрӣ мерасонад, ки ба таври автоматикӣ " "Ext2\n" "офарида тамоми бахшҳоро дар ҷои холии сахтгардони худ бударо мубодила\n" "кунед.\n" "\n" " * \"Наҷотдиҳандаи ҷадвали бахшҳо\": Агар ҷадвали бахшҳои шумо зарар дида\n" "бошад, шумо метавонед ин хосиятро истифода бурда дуруст кардани онро кӯшиш\n" "кунед. Илтимос оҳиста бошед ва дар хотир доред, ки ин метавонад нагузарад.\n" "\n" " * \"Баргардонидан\": агар шумо хоҳед, ки ҳамаи иловаҳоро бекор кунед ин\n" "хосиятро интихоб кунед.\n" "\n" " * \"Бозкорандохтан\": агар шумо хоҳед, ки ҳамаи ивазҳоро баргардонида " "ҷадвали\n" "бахшҳои аввалинро кор андохтан хлҳед, шумо метавонед ин хосиятро истифода\n" "кунед.\n" "\n" " * \"Устод\": агар шумо хоҳед, ки барои бахшкунии сахтгардони худ устодро\n" "истифода баред, ин хосиятро истифода бурда метавонед. Агар шумо дониши нағз\n" "дар бахшкунӣ надошта бошед, он ба шумо тавсия мешавад.\n" "\n" " * \"Барқарор аз дискет\": ин хосият ба шумо имконият медиҳад, ки ҷадвали " "бахшҳои\n" "пештара нигоҳ дошта шударо аз дискет барқарор кунед.\n" "\n" " * \"Дар дискет нигоҳ доштан\": ҷадвали бахшкуниро ба дискет нигоҳ медорад.\n" "Барои барқарори ҷадвали бахшҳо агар зарур шавад фоиданок аст. Он барои " "иҷрои\n" "ин қадам сахт тавсия мешавад.\n" "\n" " * \"Шуд\": вақте, ки шумо бахшкунии сахтгардони худро тамом мекунед он\n" "ивазҳои шуморо ба диск нигоҳ хоҳад дошт.\n" "\n" "Дар назар доред: шумо ҳар як хосиятро бо забонак расида метавонед. Байни\n" "бахшҳо бо истифодаи [Tab] ва [Up/Down] тирҳо гузашта метавонед.\n" "\n" "Вақте ки бахш интихоб шуд, шумо метавонед истифода баред:\n" "\n" " * Ctrl-c барои офаридани бахши нав (вақте, ки базши холӣ интихоб шудааст);\n" "\n" " * Ctrl-d барои нобуд кардани бахш\n" "\n" " * Ctrl-m барои гузориши нуқтаи васл.\n" "\n" "Агар шумо дар мошинаи PPC коргузориш карда истода бошед, шумо мехоҳед, ки\n" "бахши хурди HFS \"худраҳандоз\", ки ақалан 1МБ бошад, ки бо корандози\n" "худборшави yaхудборшав истифода хоҳад бурд, офаред.Агар шумо бахшро\n" "каме калонтар кардан хоҳед, 50МБ гӯед, шумо онро ҷои фоиданок барои нигоҳ\n" "доштани асосҳои озод ва симоҳои ramdisk барои ҳолатҳои худборшавии\n" "ғайричашмдошт, хоҳед ёфт." #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Баргардонидан" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Нигоҳ доштани ҷадвали бахш" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Мақдуниё" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Ҷадвал" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Ман намедонам чӣ хел %s-ро бо навъи %s шакл бандам" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "Модел" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "Истодани Хидматгор" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "Модем" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Тувалу" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "Синну соли гузарвожа нест барои" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Тимури Шарқ" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "Номи дохилӣ" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Илтимос берун шавед ва Ctrl-Alt-BackSpace-ро истифода баред" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Не, ман худдохилшавиро намехоҳам" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "Хориҷи %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s not found...\n" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "Ҳаҷми пинҳонӣ" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Сектори оғоз: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Ҷазираҳои Сейшелҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "Дагмаи рости Control" #: ../../network/tools.pm:1 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Зомбиё" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Миср" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Ҷумҳурии Чех" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Шумо як бахши калони MicroSoft Windows доред.\n" "Ман ба шумо авввал он бахшро бозандоза намуданро пешниҳод мекунам\n" "(дар он ангушт занед, ва баъд дар \"Бозандоза\") ангушт занед." #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Ивази навъи бахш" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "Хосиятҳои Шабака" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Гинеи Экваторӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Карибот" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "Шумо карти садои ISA доред?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Сохтани экранаксҳо пеш аз тақсимкунӣ номумкин" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "Номи Соҳиб" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Пеш аз худборшавӣ андармони симои пешфарз" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Маҳдуди хосиятҳои сатри фармон" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Ӯзбекистон" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Итмом" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Тугуиз" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 МБ" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Боз кӯшиш кунед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Ин бахш бозандозагирифта нашаванда аст" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Гватемоло" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "Ин мошина" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Ҳарфи гардони DOS: %s ()\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Баҳрайн" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Ороиши забонак: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "Зомин байни усули мӯътадил/мутахассисӣ" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Ҳаҷм" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "GRUB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Гринлонд" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "Четверг" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" "LILO ва grub корандозони худборшави GNU/Linux мебошанд. Ин марҳила\n" "одатан пурра автоматикӣ кунонида мебошад. Дар амал, DrakX соҳаҳои\n" "худборшавиро дида баромада аз рӯи он амал мекунад, вобаста ба он, ки вай\n" "дар онҷо чӣ меёбад:\n" "\n" " * агар соҳаи худборшавӣ Windows ёфт шавад, вай онро бо соҳаи худбошави\n" "grub/LILO иваз хоҳад кард. Барои ҳамин, шумо метавонед қодир шавед, ки ё\n" "GNU/Linux ё ягон СО-и дигарро кор андозед;\n" "\n" " * агар соҳаи худборшави grub ё LILO ёфт шавад, вай онро бо наваш иваз\n" "хоҳад кард.\n" "\n" "агар дар шубҳа бошад, DrakX муколамаро бо интихобҳои гуногун нишон медиҳад.\n" "\n" " * \"Корандози худборшав барои истифода\": шумо се интихоб доред:\n" "\n" " * \"GRUB\": агар шумо GRUB-ро афзал донед (менюи матн)\n" "\n" " * \"LILO бо менюи графикӣ\": агар шумо LILO-ро бо интерфейси графикии\n" "он афзал донед.\n" "\n" " * \"LILO бо менюи матн\": агар шумо LILO-ро бо интерфейси менюи мтни он\n" "афзал донед.\n" "\n" " * \"Дастгоҳи худборкунӣ\": дар бисёр ҳолатҳо шумо пешфарзро (\"/dev/hda\")\n" "иваз нахоҳед кард, вале агар шумо хоҳед, корандози худборшав метавонад ба\n" "сахтгардони дуюм (\"/dev/hdb\") ё ҳатто дар дискет (\"/dev/fd0\")\n" "корандохта шавад.\n" "\n" "* \"Андармонӣ пеш аз худборкунии симои пешфарз\": ҳангоми бозпурборкунии\n" "компютер, ин андармоние, ки дар менюи корандози худборшав ба корванд барои\n" "интихоби -- элементи худборшави дигар назар ба пешфарз имконият медиҳад.\n" "\n" "!! Эҳтиёт бошед, агар Шумо корандози худборшавро кор нагузоштанро интихоб\n" "кунед (бо интихоби ҳозир \"Бекор кардан\"), Шумо бояд барои пурборкунии\n" "системи Mandrake Linux ягон роҳашро пешгирӣ кунед! Инчунин, мӯътақид шавед,\n" "ки Шумо чӣ кор карданатонро медонед,пеш аз ивази ягон интихобҳо.!!\n" "\n" "Бо пахшкунии дагмаи \"Пешрафт\" дар ин муколима ба Шумо якчанд интихобҳои\n" "пешрафта пешниҳод карда мешавад, ки барои корвандони коршинос захира шудааст." #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Кадом шакли XОзодро Шумо доштан мехоҳед?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Зиёдтар" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Server Name" msgstr "Номи Хидматрасон" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "Рӯйхати Ҳуруф" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Интихоби файл" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Ҷопон" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "Мамлакат/ Минтақа" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "Ҷустуҷӯи хидматгорҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr "" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "Оғоз ҳангоми дархост" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "файл(ҳо)и loopback:\n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "Telugu" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "Савияи cpuid" #: ../../printer/main.pm:1 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Иловаи модул" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Уругвие" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Бенин" #: ../../printer/main.pm:1 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Монитор: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Custom & system settings" msgstr "Гузориши интихобӣ ва системӣ" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Key isn't writable" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Банглодеш" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "Санҷишҳои шиносоӣ" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "Суббота" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the root umask." msgstr "root umask гузоред." #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Дигар СО (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d қуттиҳо" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Косто Рико" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Lilo/усули ҷустуҷӯ" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Мартиник" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Кадом %s гардонро ман санҷида бинам?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "Рӯзҳои ҳафта" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Навъҳои файлсистем" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Ҷазоири Мариони Шимолӣ" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "Дискет" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "Корандози худборшав" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Ҷунбондан" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "Корандози худборшав барои истифода" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "Хидматгорҳои Ном:" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "Дақиқа" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Expert mode" msgstr "/_Усули мутахассисӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Микронезиё" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 миллиард ранг (32 бит)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Хатогӣ рух дод - ягон дастгоҳи аслие, барои офаридани файлсистеми нав ёфт " "нашуд. Барои фаҳмидани ин муаммо сахтафзорро санҷида бинед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Add Printer" msgstr "/_Иловаи Чопгар" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Ин бахш барои loopback истифода шуда наметавонад" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Файл аллакай вуҷуд дорад. Истифода барем?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Тунқо" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Тунис" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Ин нишона аллакай истифода шудааст" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Баъди шаклбандии бахши %s, ҳама додаҳо дар ин қисм гум хоҳад шуд" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Корванди пешфарзро интихоб кунед:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Габон" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "Домен" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Агар зарур бошад ҳаҷми RAM-ро муайян кунед (%d МБ ёфт шуд)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Дастгоҳи худборшав" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Ҷазоири Хурди Дури Иолоти Муттаҳида" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Ҷибути" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Карти графикӣ: %s\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/Set as _Default" msgstr "/Ҳамчун _Пешфарз гузоред" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaхудборшав" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Файл интихоб кунед" #: ../../standalone/drakbug:1 #, c-format msgid "Summary: " msgstr "" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "Интихоби дастгоҳ !" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "Хориҷи хидматрасони интихобшуда" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Қаламрави Ҷанубии Фаронса" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Ҳама додаҳо дар ин бахш бояд пуштибонӣ шуда бошад" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Барои доштани бахшҳои зиёдтар, барои офаридани бахши васеъшуда яктояшро " "нобуд кунед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Бутон" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Танзимдарории Тақсимкунии Пайвасти Интернет" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Синт Киттс ва Невис" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "OF Худборшавро дар гиронем?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Шумо JFS-ро барои базшҳои аз 16МБ хурд истифода бурда наметавонед" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Навсозии Амудии Монитор: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Нуқтаи васл" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Хатогие рух дод:\n" "%s\n" "Баъзе параметрҳоро иваз кунед" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "Корванд :" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Колумбиё" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Реюнион" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Тафсилот" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Муғулистон" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Васл шуда\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS" msgstr "Танзими CUPS" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "Интерфейси Графикӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "Дагмаи рамздошта барои %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to recover your system?" msgstr "Шумо системи худро барқарор кардан мехоҳед?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "Сахтафзори муайяншуда" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Маврикий" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "Даргиронидани бахши swap %s" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Монако" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s шаклбандии %s нагузашт" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "Афзоиш" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Қирғизистон" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Саҳрои Кабири Ғарибӣ" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Африқои Ҷанубӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Бахшро интихоб кунед" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "Таҳрири қоидаи равона" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "Муҳити Дигар" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Сектор" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Qatar" msgstr "Оғоз" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Дар ҳар худборшавӣ /tmp-ро тоза кунед" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Моловӣ" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: false" msgstr "Файлҳои маҳаллӣ" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "System settings" msgstr "кор андохтани гузориш" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "Лутфан намуди мушатонро интихоб кунед." #: ../../services.pm:1 #, c-format msgid "running" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Подшоҳии Муттаҳида" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Indonesia" msgstr "шудагӣ" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "пешфарз" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "маҳдуд" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Синегол" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "" #: ../advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "Марта" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Мунтесирот" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Мубодила" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom settings" msgstr "кор андохтани гузориш" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "Ба танзим даровардан" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "Хориҷи интихоб шуда соҳиб/шабака" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Монитори Навъи Нав" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "Барқарор Аз CD" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "Системи чопкунро иваз кунед" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "Файли дастгоҳи кӯҳна" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Mаълумот: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Дагма: `%s': %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "Шуд" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Хориҷи интихоб шуда соҳиб/шабака" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Коргузоштан" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Ҳабашистон" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "Ҷадвал" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Карти графикиро интихоб кунед" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Коргузориши %s нагузашт. Хатогии зерин рух дод:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Коргузориши LILO/ҷустуҷӯ" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Донморк" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Ғеҷонидани бахш ..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Санҷиши танзимдарорӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "Дар охир, вобаста ба интихоби шумо интихоб кардан ё накардани қуттиҳои\n" "шахсӣ, ба шумо шохае бо ҳама қуттиҳо, ба гурӯҳҳо ва зергурӯҳҳо тақсим шуда,\n" "намоиш дода мешавад. Ҳангоми нигоҳи шоха, шумо метавонед гурӯҳҳо, " "зергурӯҳҳо,\n" "ё қуттиҳои шахсиро интихоб кунед.\n" "\n" "Вақте,ки шумо қуттиро дар шоха интихоб мекунед, тавсифи он дар тарафи рост\n" "пайдо мешавад. Вақте ки, интихоби шумо тамом мешавад, \"Кор гузштан\"-ро " "ангушт\n" "занед, кадоме ки равиши коргузориро сар мекунад. Вобаста ба суръати " "сахтафзор ва\n" "шумораи қуттиҳои кор гузошта шаванда, ин метавонад каме вақт барои тамом\n" "кардани равиш гирад. Вақти анҷоми баҳодиҳӣ, дар экран нишон дода мешавад,\n" "ки ба шумо ёрӣ расонад, ки оё баҳри ҳаловат бурдан аз як пиёла қаҳва вақти " "кифоя\n" "мавҷуд аст ё не.\n" "\n" "!! Агар қуттии хидматрасон қасдан ё аз сабаби як қисми гурӯҳи бутун буданаш\n" "интихоб шуда бошад аз шумо пурсида мешавад, ки коргузориши онҳоро хостани\n" "шумо тасдиқ карда шавад. Дар зери Mandrake Linux, ҳар як хидматрасони\n" "коргузошта шуда ба таври пешфарз дар вақти худборшавӣ оғоз мешавад. Ҳатто\n" "агар дар вақти паҳнкунӣ онҳо бехатар ва ягон натиҷае надошта бошанд ҳам,\n" "мумкин аст, ки шикофҳои бехатарие, ки баъд аз тамом шудани ин нусхаи " "Mandrake\n" "Linux зоҳир шудаанд.Агар шумо барои чӣ лозим будани ё барои чӣ он " "коргузошта\n" "шудани хадамоти алоҳидаро надонед, \"Не\"-ро ангушт занед. Ангуштзании \"Ҳа" "\"\n" "хадамотҳои рӯйхатшударо кор хоҳад гузашт ва онҳо ба таври автоматикӣ оғоз\n" "хоҳанд шуд. !!\n" "\n" "Хосияти \"Тобеиятҳои автоматикӣ\" ҳаиту муколамаи огоҳиро хомӯш мекунад,\n" "ки ҳангоми интихоби автоматикии қуттӣ пайдо мешавад. Ин барои он рух\n" "медиҳад, ки муайян шудааст, ки барои бомуваффақият тамом кардани " "коргузориш,\n" "тобеият бояд бо қуттии дигар қонеъ карда шавад.\n" "\n" "Тасвири хурди дискет дар поёни рӯйхат ба шумо иҷозат медиҳад, ки рӯйхати\n" "қуттиҳои дар коргузориши пештара интихобшударо кор андозед. Бо ангуштзании\n" "ин тасвир аз шумо хоҳиш карда мешавад, ки дискети дар коргузориши пештара\n" "офаридашударо дохил кунед. Нӯги дуюми қадами охиринро, барои офаридани\n" "ин хел дискет, бинед." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Сиро Леун" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Бутсвона" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Andorra" msgstr "Баранда" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(арзиши пешфарз: %s)" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "X хидматрасонро интихоб кунед" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Шаклбаста\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Борбодус" #: ../advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "/File/_New" msgstr "/Файл/_Нав" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Иловаи гурӯҳ" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "БеВидео" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Xpmac (коргузориши гардони намоишгар)" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "Соҳиб %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Успаниё" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Ин номи корванд аллакай илова шудааст" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "Сан Морину" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Белжик" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Kuwait" msgstr "Баромадан" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Барои корандохтан менеҷери оинаро интихоб кунед:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "Декабря" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "Устози Аввалин Маротиба" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "Тойвон" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Покистон" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "Интерфейси графикӣ" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Чод" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "Ҳиндустон" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr " XОзод %s бо шитоби сахтафзори 3D" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Услувок" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Singapore" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Камбуҷа" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Ҳамгомкунии Уфуқии Монитор: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "Иловаи корванд" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "No CDROM support" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "“Кор андохтани модули %s нагузашт.\n" "”“Шумо мехоҳед боз бо дигар параметрҳо кӯшиш кунед?”" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Бусни Ҳерзогавин" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Ба Шумо файлсистеми ҳақиқии (ext2/ext3, reiserfs, xfs, or jfs) барои ин " "нуқтаи васл лозим аст\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Ҳуланд" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "Сарлавҳа" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "ОГОҲ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Ҷазоири Вирҷин (И.М.)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Ҳаити" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Basic options" msgstr "Хосиятҳои Асосии DrakSec" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Оҳиста: ин омил хатарнок аст." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "Хидматгор:" #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Суид" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Лаҳистон" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "Дигар бандарҳо" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid " - detected" msgstr "Автомуаяйнамоӣ" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Use existing partition" msgstr "Бахшбандиҳои ҳозир бударо истифода баред" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Ёрӣ/_Дар бораи..." #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "Танзимдарории тақсимкунии чопгари CUPS" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XОзод %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Root umask" msgstr "Гузарвожа" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "Дискет" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "Барқарор" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Server:" msgstr "Хидматгор:" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Лутфан, мунтазир шавед, ки интихобҳои бехатарӣ ба роҳ монда мешавад..." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "Пайғоми Init" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Наҷоти ҷадвали бахш" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Қабрес" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Хориҷ аз RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "Устоди Танзимдарорӣ" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Акнун шумо метавонед хадамотҳое, ки дар вақти худборшавӣ оғоз кардан\n" "мехоҳед, интихлб кунед.\n" "\n" "Инҷо ҳамаи хадамотҳои дастрас дар коргузориши ҷорӣ номиш шудаанд. Ҳамаи\n" "онҳоро бодиққат дида баромада онҳое, ки на ҳама вақт дар вақти худборшавӣ\n" "лозим мешаванд, тафтиш накунед.\n" "\n" "Шумо бо интихоби хадамоти муайян, матни кӯтоҳи шарҳдиҳанда доир ба хадамот\n" "гирифта метавонед. Ба ҳар ҳол, агар шумо дар бораи лозим будан ё набудани\n" "хадамот мӯътақид набошед, беҳтараш рафтори пешфарзро гузоред.\n" "\n" "Дар ин марҳила, агар шумо нияти мошинаи худро ҳамчун хидматрасон истифода\n" "бурдан дошта бошед хеле эҳтиёт шавед: эҳтимол шумо мехоҳед, ки хадамотҳои\n" "нолозимаро оғоз накунед. Илтимос дар назар доред, ки хадамотҳои гуногун, " "агар\n" "онҳо дар хидматрасон фаъол бошанд хатрнок буда метавонанд. Умуман, танҳо\n" "хадамотҳое, ки ба шумо ҳақиқатан заруранд интихоб кунед." #: ../../lang.pm:1 #, fuzzy, c-format msgid "Niue" msgstr "Хулоса" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Aruba" msgstr "Ҷустуҷӯ" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "Корвандҳо" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Гузарвожаҳо мувофиқ нестанд" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "Лутфан, дар куҷо нусхаи эҳтиёт карданро интихоб кунед" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Do you want to start a new configuration ?" msgstr "Шумо шаклро санҷидан мехоҳед" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Номи файлро диҳед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Лутфан бандаре, ки чопгари шумо пайваст шудааст интихоб кунед." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Порогвие" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Кадом шакли XОзодро Шумо доштан мехоҳед?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "зӯрӣ" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Хуруҷ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Бахш ба таври пешфарз худбор шуд\n" " (барои MS-DOS худборшавӣ, на барои lilo)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "дастгоҳ инхоб кунед" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Файли loopback %s-ро дар куҷо васл кардан мехоҳед?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 МБ" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: thin" msgstr "Навъ: %s" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Шумо бахши нармафзори RAID-ро ҳамчун root (/) интихоб кардед.\n" "Ягон корандози boot инро бе бахши /boot даста карда наметевонад.\n" "Барои иловаи бахши /boot эҳтиёт бошед" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Дигар СО (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "ЭкранАксҳо баъд аз коргузориш дар %s дастрас мешаванд" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Зиёда аз як бахши Microsoft Windows дар сахтгардони шумо муайян шуд. " "Якеашро,\n" "ки шумо барои кор гузоштани системи омили нави Mandrake Linux-и худ бозҳаҷм\n" "гирифтан мехоҳед, интхоб кунед.\n" "\n" "Ҳар як бахш чунин ба рӯйхат гирифта шудааст: \"Номи Linux\", \"Номи Windows" "\"\n" "\"Ғунҷоиш\".\n" "\n" "\"Номи Linux\" чунин сохт дорад: \"навъи сахтгардон\", \"рақами сахтгардон" "\",\n" "\"рақами бахш\" (барои мисол, \"hdal\").\n" "\n" "\"Навъи сахтгардон\", агар шумо сахтгардони IDE дошта бошед \"hd\" " "мебошад,\n" "ва \"sd\" агар шумо SCSI дошта бошед.\n" "\n" "\"Рақами сахтгардон\" ин ҳама вақт ҳарфест баъд аз \"hd\" ё \"sd\". Бо " "сахтгардонҳои\n" "IDE:\n" "\n" " * \"a\" маънои \"сахтгардони соҳиб дар нозири аввалаи IDE\"-ро дорад,\n" "\n" " * \"b\" маънои \"сахтгардони ғулом дар нозири аввалаи IDE\"-ро дорад.\n" "\n" " * \"c\" маънои \"сахтгардони соҳиб дар нозири дуввуми IDE\"-ро дорад.\n" "\n" " * \"d\" маънои \"сахтгардони ғулом дар нозири дуввуми IDE\"-ро дорад.\n" "\n" "Бо сахтгардонҳои SCSI, \"a\" маънои \"Шиносномаи пасттарини SCSI\", \"b\" " "маънои\n" "\"Дуюм шиносномаи пасттарини SCSI\", ва ғ. Дорад.\n" "\n" "\"Номи Windows\" ин ҳарфи сахтгардони шумо таҳти Windows (диск ё бахши якум\n" "\"C:\" номида мешавад)." #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Ҳисоби ҳудуди файлсистеми FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "Номи мавзӯъ" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Help" msgstr "Ёрӣ" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Ҷазоири Кук" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Шаклбандии бахши %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit kernel version" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Бекор кардан" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "Усули видео" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "Хориҷи Интихобшуда" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Connection Type" msgstr "Намуди Пайвастагӣ :" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "Дигар" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "Пешфарз" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter a package name." msgstr "Илтимос ноим корвандро диҳед" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X Хидматрасон" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Файл/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "" #: ../../install_messages.pm:1 #, fuzzy, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Ҳиндурос" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Samba server" msgstr "Хидматгори Samba" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Ин бахши махсусуи худроҳандоз\n" "барои худборшавии дучанди\n" "системи шумо\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/_Баромадан" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Ҳофизаи графикӣ: %s кБ\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Global statistics" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "“Агар шумо aboot-ро истифода бурдан хоҳед, албатта ҷои холӣ (2048 сектор " "кофӣ ” “аст)\n" "”“дар аввали диск монед”" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Time Zone" msgstr "Минтақаи соатӣ" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Офаридан" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "Хомӯши Хидматгор" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "Калиди рамздоштаи Файлсистем" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Бразил" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "Худ Коргузориш" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "Худваслкунии хориҷшавандаи муҳит" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Офаридани бахши нав" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "Гардонанда:" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "Ана шумо дар куҷо. Коргузориш акнун тамом шуд ва системи GNU/Linux-и шумо\n" "ба истифода тайёр аст. Барои бозхудборшавии систем ҳамту \"OK\"-ро ангушт\n" "занед. Шумо метавонед GNU/Linux ё Windows-ро, кадомашро ки мехоҳед (агар\n" "шумо дучанд боршаванда бошед) он вақте ки компютер боз худбор шавад, оғоз " "кунед.\n" "\n" "Дагмаи \"Пешрафта\" (танҳо дар усули Мутахассисӣ) боз ду дагмаи дигарро\n" "нишон медиҳад, барои:\n" "\n" " * \"эҷоди дискети худкоргузориш\": барои офаридани дискети коргузорише,\n" "ки ба таври автоматикӣ ҳамаи коргузоришро бе ёрии амалдгар ба монанди\n" "коргузорише, ки шумо ҳозир танзим даровардед иҷро хоҳад кард.\n" "\n" " Дар назар доред, ки ду хосиятҳои дигар пас аз ангуштзании дагма дастрас\n" "хоҳад шуд:\n" "\n" " * \"Бознавохтан\". Ин бахшкунии қисман автоматикӣ чунки қадами бахшкунии\n" "(ва танҳо ҳамин як) муҳовираӣ мемонад.\n" "\n" " * \"Автоматикӣ\". Коргузориши пурра автоматикӣ: диски сахт пурра аз нав\n" "навишта шудааст, ҳама додаҳо гум шудаанд.\n" "\n" " Ин хислат ҳангоми кор гузоштани мошинаҳои зиёди якхела хеле қулай аст.\n" "Соҳаи Худкоргузоришро дар Web сайти мо бинед.\n" "\n" " * \" Нигоҳдории интихоби қуттиҳо\"(*): интихоби қуттиҳоро чуноне, ки " "пештар\n" "шуда буд нигоҳ медорад. Баъд, ҳангоми кардани дигар коргузориш, дискетро\n" "ба гардон дохил карда ва ба экрани ёрӣ рафта бо пахши дагмаи [F1] ва бо " "чопи\n" ">>linux defcfg=\"floppy\"<< кор андозед.\n" "\n" "(*) Шумо мӯҳтоҷи дискети FAT-шаклбандшуда мебошед (барои дар таҳти GNU/" "Linux\n" "офаридан, \"mformat a:\"-ро ҳуруфчинӣ кунед)" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Молдавӣ" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Акнун шумо метавонед хосиятҳоро ба модули %s таъмин кунед.\n" "Хосиятҳо дар андозаи ``ном=қиммат ном2=қиммат2 ....''.\n" "Масалан, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Ҷадвали бахшро нанавишта бароем?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Ангуло" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Латвонӣ" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "" "Файл аллакай бо дигар loopback истифода шудааст, дигарашро интихоб кунед" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 МБ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "Маълумот" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Кадом файлсистемро шумо мехоҳед?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Молет" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Маълумоти муфассал" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "Карти Графикӣ" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Камирун" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Close" msgstr "Тоза кунед" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Ислонд" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "Монитори Навъи Нав" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "Усули Мутахассисӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the user umask." msgstr "Userdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "Хидматгори Samba" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Зимбобве" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Финлонд" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Чуқурии ранг: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Услувонӣ" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Mouse test" msgstr "Навъи муш: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "“Дохил кардани корванд\n" "”“%s”" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Дар ҳамин лаҳза дар менюи худборшав элементҳои зерин ҳастанд.\n" "Шумо метавонед элементҳои иловагӣ офаред ё вуҷуд бударо иваз кунед." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "" #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Ивази навъ" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr "" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Коргузориши SILO" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "Аз рӯи қарордоди шабакавӣ барқарор намудан: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Ҳалнокӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Карти шумо бо XОзод %s пуштибони шитоби сахтафзори 3D дошта метавонад.\n" "ДАР НАЗАР ДОРЕД, КИ ИН ПУШТИБОНИ ТАҶРИБАВӢ АСТ ВА МЕТАВОНАД СИСТЕМИ ШУМОРО " "ФАЛАЧ КУНАД." #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Shell timeout" msgstr "Танаффуси Худборшави Асосӣ" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Хадамоти Xinetd" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Шумо /etc/fstab таъғирёбиҳоро нигоҳ доштан" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-дискҳо %s\n" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "Шиносномаи гузаргоҳ" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Илтимос аввал кӯмакрасонӣ додаҳои худро созед" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Eritrea" msgstr "Соҳаи Мутахассис" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Firmware needed" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "Хориҷи Рӯйхат" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Марокеш" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Нипол" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- Нобуд кардан" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "ҳаҷми пора" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "фармонҳо пеш аз худборшавӣ, ё ‘c’ барои сатри фармон." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Бозкорандохтани ҷадвали бахш" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ҳа, ман худдохилшавиро бо ин (корванд, мизи корӣ) мехоҳам" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Selected" msgstr "Хориҷи Интихобшуда" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "Root" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "Навъи мизонгар:" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Шумо шаклро санҷидан мехоҳед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Actions" msgstr "Амалҳо" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "Хориҷи пункти охирон" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Size: " msgstr "Ҳаҷм: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "Шумо инро ба кадом сектор ғеҷонидан мехоҳед?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Боҳомос" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Шумо ба ин дагма ангушт задан мехоҳед?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Manual configuration" msgstr "Танзимдарории Раҳнамо" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (коргузориши гардони намоишгар)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Хосиятҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Барои илова LVM-и вуҷуддоштаро интихоб кунед" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "бозоғози xfs" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "Ноинтихоби Ҳама" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "Ягон бахшбандӣ дастрас нест" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Management \n" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "modem" msgstr "Модел" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "DrakClock" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Дар баъзе ҳолатҳо барои кори дуруст %s гардон бояд маълумоти иловагӣ\n" "дошта бошад, гарчанде ӯ бе он ҳам нағз кор мекунад. Шумо мехоҳед барои ӯ " "хосиятҳои\n" "иловагиро муайян кунед ё ба гардонанда иҷозат медиҳед, ки ба мошинаатон\n" "маълумоти заруриро санҷида бинад? Баъзан, санҷиш компютерро муаллақ " "мекунад,\n" "вале ин ягон зарар нахоҳад расонд." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Кубо" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "Октября" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Belize" msgstr "Бозандозагирӣ" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Хориҷкунии чопгар \"%s\"..." #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Танаффуси Худборшави Асосӣ" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "“Карти шумо метавонад пуштибони шитоби сахтафзори 3D-ро дорад вале танҳо бо " "XОзод %s.\n" "”“Карти шумо бо XОзод %s пуштибонӣ шудааст, ки пуштибони беҳтарро дар 2D " "дошта метавонад.”" #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "Бахшбандиҳои ҳозир бударо истифода баред" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 МБ" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "Дар куҷо" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "" #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Ҷазираи Милод" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Automatic" msgstr "Антарктика" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Ин гузориши дуруст аст?" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "Бозтанзимдарории автоматикӣ" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Ҷазоири Турк ва Койкус" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "Гузашта" #: ../../standalone/drakbackup:1 #, c-format msgid "Transfer Now" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Мавзӯъҳо" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Хосиятҳо: %s " #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Шумо ҳозир %s-ро ҳамчун мудири худборшавӣ истифода бурда истодаед.\n" "Барои сардиҳии устози гузориш ба Танзим додан ангушт занед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Синт Ҳилин" #: ../../printer/main.pm:1 #, c-format msgid "Parallel port #%s" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Sudan" msgstr "SunOS" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Марҳамат ба %s интихобкунандаи системи омил!\n" "\n" "Аз рӯйхати болоӣ системи омилро интихоб кунед ё\n" "барои худборшавии пешфарз %d сония интизор шавед.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Номи файли loopback" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Left Control key" msgstr "Идоракунии Дурдаст" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Ин феҳрист бояд дар дохили файлсистеми root бошад" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Ҳаҷми ҳофизаи карти графикии худро интихоб кунед" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "Номи LVM?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s интерфейсҳо ёфт шудаанд" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO бо менюи матн" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "Кунед" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "Коргузориши систем" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Синт Винсент" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "/File/_Open" msgstr "/Файл/_Баромадан" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Кушодани Андармони Миёнафзор" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Маҷористон" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Зилонди Нав" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "Танзимдарории ранг" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "лутфан барои барқарор сана интихоб кунед" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Онтили Ҳуланд" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Гузариш аз ext2 ба ext3" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "GB" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Илтимос ноим корвандро диҳед" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "CD Худборшавро дар гиронем?" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" # #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "Января" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Password history length" msgstr "Ин гузарвожа хел содда аст" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "Соҳиб %s" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "Мошинаҳои дастрас нест" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use .backupignore files" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Гине" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "" #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Музомбик" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Тасвир" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Kill those programs" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "Лутфан, чиро нусхаи эҳтиёт карданро интихоб кунед" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 ранг (8 бит)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Хонда-навишт" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Ҳаҷм: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a rule" msgstr "Иловаи модул" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Ҳаҷми пора %s\n" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Шумо дар куҷо дастгоҳи %s-ро васл кардан мехоҳед?" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Хатогӣ!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Dominica" msgstr "Домен" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Бозандозагирӣ" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Ҳалнокӣ: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Лутфан бандари дурустро интихоб кунед. Барои мисол, бандари \"COM1\" таҳти " "Windows дар таҳти GNU/Linux \"ttySO\" номида мешавад." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Бахшбандиҳои ҳозир бударо истифода баред" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Дастгоҳи муш: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "Охиран аз шумо пурсида мешавад, ки оё шумо ҳангоми худборшавӣ интерфейси\n" "графикиро дидан мехоҳед. Дар назар доред, ки ҳатто агар шумо санҷиш кардани\n" "танзимдарориро интихоб накарда бошед ҳам, ин суол ба шумо дода мешавад. " "Яқинан,\n" "агар мошинаи шумо мисли хадматрасон фаъолият бурдани бошад, ё ин ки агар " "шумо\n" "дар танзимдарории намоиш нобарор шуда бошед, шумо \"Не\" ҷавоб додан мехоҳед." #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "You've not selected any font" msgstr "Хориҷи интихоб шуда соҳиб/шабака" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Баъд аз ивази навъи бахши %s ҳама додаҳо дар он бахш гум хоҳад шуд" #: ../../harddrake/data.pm:1 #, c-format msgid "ISDN adapters" msgstr "" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d сония" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "Интерфейси \"%s\" ёфт шуд, истифода бурдан мехоҳед?" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "Танзимдарории Садо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "Навъ: %s" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "Хидматгори Ftp" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Uganda" msgstr "Баргардонидан" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "" "Лутфан дар кадом бандари беруна муши шумо пайваст буданашро интихоб кунед." #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Коморос" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "Мая" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Усули Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "KB" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "Монитори Навъи Нав" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "Шабака" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Ин гузарвожа хел содда аст" #: ../../security/l10n.pm:1 #, c-format msgid "Chkconfig obey msec rules" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "" #: ../advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No devices found" msgstr "Маълумоти сахтгардон" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "Истифодаи азозил" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "%s-ро дар куҷо васл кардан мехоҳед?" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Алҷазоир" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Initrd-ҳаҷм" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set as default" msgstr "пешфарз" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2МБ" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on this machine" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "Хориҷкунии чопгар \"%s\"..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "ignore" msgstr "Зиёдтар" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Куниё" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Аввал ``Ҷудо кардан''-ро истифода баред" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "Шумо бояд қисми решагиро муайян кунед" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "Карти графикиро интихоб кунед" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "Танзимдарории Drakbackup" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "Танзимдарории систем" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "Худдохилшавӣ" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "Танзимдарории замимаҳо..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Ҷазоири Вирҷин (Британиҳо)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Бермудо" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Рӯйхати дар боло буда ин бахшҳои вуҷуддоштаи Linux мебошад ки дар\n" "гардони шумо муайян шудааст. Шумо метавонед интихобҳои устодро нигоҳ\n" "доред, онҳо барои коргузоришҳои оддӣ хуб ҳастанд. Агар шумо ягон иловаҳо\n" "карда бошед, шумо аққалан бояд бахши root-ро муайян куед (\"/\"). Бахши\n" "хурдро интихоб накунед вагарна шумо нармафзори кофиро интихоб карда\n" "наметавонед. Агар шумо додаҳои худро дар бахши алоҳида нигоҳ доштан хоҳед,\n" "шумо ҳамчун бояд бахшро барои \"/home\" офаред (танҳо агар шумо аз якто " "зиёд\n" "бахши Linux дошта бошед, дастрас аст).\n" "\n" "“Ҳар як бахш чунин ба рӯйхат гирифта шудааст: \"Ном\", \"Ғунҷоиш\".\n" "\"Ном\" чунин сохт дорад: \"намуди сахтгардон\", \"рақами сахтгардон\",\n" "\"рақами бахш\" (барои мисол, \"hdal\").\n" "”\n" "\"Навъи сахтгардон\" \"hd\" аст агар сахтгардони шумо IDE бошад ва \"sd\"\n" "аст агар сахтгардон SCSI бошад.\n" "\n" "\"Рақами сахтгардон\" ин ҳама вақт ҳарфест, баъд аз \"hd\" ё \"sd\". Барои\n" "сахтгардонҳои IDE:\n" "\n" " * \"a\" маънои \"сахтгардонb сохибӣ дар нозири IDE аввала\"-ро дорад,\n" "\n" " * \"b\" маънои \"сахтгардони ғуломӣ дар нозири IDE аввала\"-ро дорад,\n" "\n" " * \"c\" маънои \"сахтгардони соҳибӣ дар нозири IDE дувумдараҷа\"-ро дорад,\n" "\n" "” * \"d\" маънои \"сахтгардони ғуломӣ дар нозири IDE дувумдараҷа\"-ро " "дорад,\n" "\n" "Бо сахтгардони SCSI, \"a\" маънои \"Шиносномаи SCSI-и пасттарин\"-ро дорад,\n" "\"b\" маънои \"Шиносномаи SCSI пасттарини дуввум\", ва ғ." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "Хориҷ" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Лисуту" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Remove system config files" msgstr "Файли loopback-ро хориҷ кунем?" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Соҳили Оҷ" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Ҳа" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Шумо кадом қарордодро истифода бурдан мехоҳед?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Эстон" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "Канал" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Илова" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "Фаъол" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Нуқтаи васлкунӣ: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "Мошинаҳои дастрас нест" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Шакли бисёр-сарлавҳа дор" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Тағиротҳоро нигоҳ дорем?\n" "Танзимдарории ҳозира чунин аст:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Шумо ReiserFS-ро барои бахшҳои аз 32МБ хурд истифода бурда наметавонед" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Холӣ" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Шумо дар куҷо дастгоҳи %s-ро васл кардан мехоҳед?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "Интерфейс \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Озмун" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "Зиёдтар" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "Баранда" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "OK" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "" #: ../advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "" "Лутфан дар кадом бандари беруна муши шумо пайваст буданашро интихоб кунед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Гронодо" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Хатарнок" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "SSH server" msgstr "Хидматгори SSH" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s сектор" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Не" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Гвадлуп" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Kannada" msgstr "Канада" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Суръати навсозии амудӣ" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Ниҷер" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "Хориҷкунии %s ..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "танзимдарории огоҳинома" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "Февраля" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Умумӣ" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "Апреля" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Deactivate now" msgstr "Фаъол" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Филипин" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "Ok" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "Ғеҷонидани файлҳо ба бахши нав" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Питкорин" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "Барқарор Аз Каталог" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO бо менюи графикӣ" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Муайян кардани хосиятҳо" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Вануату" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Шумо файл системи рамздоштаро барои нуқтаи васли %s истифода бурда " "наметавонед" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Ҷазираи Нурфолк" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Истифода барои loopback " #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "Ғеҷонидани файлҳо ба бахши нав" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr " XОзод %s бо шитоби сахтафзори 3D-и ТАҶРИБАВӢ" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Афғонистон" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "Хосиятҳои Зиёдтар" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Бурунти" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Оҳиста хонед!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" "Барои худборкардани СО-и интихобшуда enter-ро пахш кунед, ‘e’ барои таҳрири" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "Калидҳои рамздошта мувофиқ нестанд" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "USB printer" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "Пеш аз давом додан шумо бояд шартҳои лисензияро бодиққат хонед. Он ҳамаи\n" "паҳнкунии Mandrake Linux-ро дар бар мегирад ва агар шумо бо ягон шарт розӣ\n" "нашавед дар дагмаи \"Рад кардан\", ки фавран коргузоришро нобуд мекунад,\n" "ангушт занед. Барои бо коргузориш давом додан дагмаи \"Қабул\"-ро ангушт " "занед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Ҳалнокиҳо" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "Хориҷи интихоб шуда соҳиб/шабака" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jaz drives" msgstr "/Автомуайяннамои ронданҳои _jazz" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "TB" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "ДАҒАЛ" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Refresh the list" msgstr "Рӯйхати корвандҳо" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "Нобуд кардан" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Ман метавонам компютери шуморо чунин гузорам, ки ҳангоми худборшавӣ, " "интерфейси графикӣ (XFree) ба таври автоматикӣ сар шавад оғоз шавад.\n" "Шумо мехоҳед ҳангоми бозхудборшавӣ бо XFree оғоз кунед?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "Хидматгори SSH" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakboot:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "Хатогӣ" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Остролиё" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Танзимдарории танҳо карти \"%s\"%s" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "Савия" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "Системи чопкунро иваз кунед" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "“Системи шумо пуштибони шакли бисёр сарлавҳа мебошад.\n" "”“Шумо чӣ кор кардан мехоҳед”" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "васлкунӣ нагузашт: " #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Cимо" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "Интихоби Ҳама" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "дастгоҳ" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save to:" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "Юнон" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Ҳама" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "Июля" #: ../../printer/main.pm:1 #, c-format msgid "Prints into %s" msgstr "" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Феҳристи %s аллакай додаҳо дорад\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Ҳаҷми ram-ро бо МБ диҳед" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "Пятница" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet complete." msgstr "" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Номи ҳақиқӣ" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "шудагӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Буркино Фосу" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "Июня" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Молдивз" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "фишурда" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 дақиқа" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: fat" msgstr "Навъ: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "дар канали %d шиносномаи %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "Танзимдарории интихобӣ" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Синт Пир Миколеюн" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "Сентября" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Пуртуқол" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Шумо боз дигар доред?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Зомин ба усули мӯътадил" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "Силиндри %d то %d\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Шумо инро ба кадом диск ғеҷонидан мехоҳед?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Saami (norwegian)" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Ҷазоири Маршал" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Root password" msgstr "Гузарвожа" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVDRAM device" msgstr "дастгоҳ" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Шумо бахши мубодила надоред.\n" "\n" "Ба ҳар ҳол давом диҳем?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Suriname" msgstr "Номи корванд" #: ../../network/adsl.pm:1 #, c-format msgid "Use a floppy" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Enable ACPI" msgstr "CD Худборшавро дар гиронем?" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Ҷабалуттариқ" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "Ҳеҷ кор накунед" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "Мизоҷро Нобуд кунед" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Навъи файлсистемҳо: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "Оғозкунии шабака... " #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Ёрӣ" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Шумо кадом ҳаҷмро барои Windows доштан мехоҳед" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "Номи корванд талабкарда мешавад" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Device" msgstr "Дастгоҳ: " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Одатан, DrakX забонаки дурустро интихоб мекунад (вобаста ба забоне, ки шумо\n" "интихоб кардаед) ва шумо ин қадамро ҳатто намебинед. Ба ҳар ҳол шумо мумкин\n" "забонаке, ки айнан ба забони шумо мувофиқат мекунад надошта бошед, Агар " "шумо\n" "шахси Суиси англисзабон бошед, шумо мумкин забонаки Суиси хоҳед. Ё агар " "шумо\n" "Англисӣ сухан ронда дар Квебек зиндагӣ мекарда бошед, шумо худро дар ҳамин " "ҳолат\n" "меёбед. Дар ҳар ду ҳолат, шумо бояд ба ин қадами коргузориш баргардед ва " "забонаки\n" "муносибро аз рӯйхат интихоб кунед.\n" "\n" "Барои дастрас кардани рӯйхати пурраи забонакҳои таъмин шуда дар \"Бисьёртар" "\"\n" "ангушт занед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Activate now" msgstr "Фаъол" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 МБ ё зиёдтар" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Шаклбастанашуда\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Танзимдарории Навъи Худборшавӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Файл/_Баромадан" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Ҳаҷми навро интихоб кунед" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Ҷазоири Фару" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "Номи модел" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Олбанӣ" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Қаламрмви Уқъёнуси Ҳиндӣ - Британиявӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "Шабака %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "Нусхабардории %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Миёнмор" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Баромадан" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Худ ғунҷонӣ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "Муҳити Дигар" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "burner" msgstr "корванд" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " (Default is all users)" msgstr "Пешфарз" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "Мошинаҳои дастрас нест" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "“Хосият ‘’Маҳдуди хосиятҳои сатри фармон‘’ бе гузарвожа суд надорад”" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "United Arab Emirates" msgstr "Иолоти Муттаҳида" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Тойлонд" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "Ҷустуҷӯ:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Қазоқистон" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Write" msgstr "Навиштан %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Ҷазираи Буве" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on a parallel port" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "Ягон сахтгардон ёфт нашуд" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Нишона" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check open ports" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Хориҷи интихоб шуда соҳиб/шабака" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "Ҳамаи бахшҳое, ки нав муайян шудаанд барои истифода бояд шаклбаста шаванд\n" "(шаклбандӣ маънои офаридани системи файл дорад).\n" "\n" "Дар ин вақт, шумо мумкин хоҳед, ки барои кӯр кардани ягон додаҳое, ки онҳо\n" "соҳиб мебошанд баъзе бахшҳои аллакай мавҷуд бударо боз шакл бандед. Агар\n" "шумо ин корро кардан хоҳед, он бахшҳоро ҳам интихоб кунед.\n" "\n" "Ба назар гиред, ки боз шакл бастани ҳамаи бахшҳои пеш вуҷуддошта зарур " "нест.\n" "Шумо бояд бахшҳои соҳиби системи омилро (ба монанди\"/\", \"/usr\" ё \"/var" "\")\n" "боз шакл диҳед вале шумо набояд бахшҳое, ки соҳиби додаҳое, ки шумо нигоҳ\n" "доштан мехоҳед, шакл диҳед (одатан \"/home\").\n" "\n" "Илтимос ҳангоми интихоби бахш оҳиста бошед. Баъди шаклдиҳӣ, ҳама додаҳо\n" "дар бахши интихобшуда нобуд хоҳад шуд ва шумо ягонтои онро баргардонида\n" "наметавонед.\n" "\n" "Вақте, ки шумо ба шаклдиҳии бахш тайёр мешавед дар \"OK\" ангушт занед.\n" "\n" "Агар шумо барои корандозии системи омили Mandrake Linux -и худ дигар бахшро\n" "интихоб кардан хоҳед дар \"Бекор кардан\" ангушт занед.\n" "\n" "Агар шумо хоҳед, ки бахшҳоеро, ки барои блокҳои бад дар диск санҷида " "шаванд,\n" "интихоб кунед, дар \"Пешрафта\" ангушт занед." #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Allow X Window connections" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "" #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Хадамоти Xinetd" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Шумо корандози худборшавро дар бахши %s корандохта наметавонед\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Пурту Рику" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Telnet server" msgstr "X Хидматрасон" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Ангутило" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Антарктика" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Хосиятҳои васл" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Ҷомойко" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Илова ба LVM" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Туриндод ва Тубогу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host name or IP." msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Edit" msgstr "Таҳрир" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "содда" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Тоза кардани ҳамааш" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Ҷазоири Фолкланд" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Boot disk creation" msgstr "Дастгоҳи худборшав" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "Понедельник" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "authentication" msgstr "Шиносномаи гузаргоҳ" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/_Файл" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Editable" msgstr "Ҷадвал" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "Шумо кадом dhcp-мизоҷро истифода бурдан мехоҳед?\n" "Пешфарз ин dhcp-мизоҷ." #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Майоти" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d KB\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "Хориҷкунии чопгар \"%s\"..." #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "Русия" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "Ҷузъбандӣ" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Барои худ-ғунҷонӣ ҷои холии кофӣ нест" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Баъди бозандозагирии бахши %s, ҳамаи додаҳо дар ин бахш гум хоҳад шуд" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "USB" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_About..." msgstr "Дар бораи" #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Имтиёз: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Ҷазоири Сулймон" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "Лутфан навъи мушро интихоб кунед." #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(модули %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Гурўҳи корӣ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "down" msgstr "шудагӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "Танзимдарории интерфейси равонаро нишон диҳед" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add Printer" msgstr "Чопгарҳо:" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #: ../../help.pm:1 #, c-format msgid "Development" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Шуд" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "Хидматгори Веб" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Chile" msgstr "Файл интихоб кунед" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(аллакай илова шуд %s)" #: ../../any.pm:1 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "Коргузориши корандози худборшав" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "Иловаи/Нобуди Корвандҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Танзимдарориҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Нав" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Ин нуқтаи ҳалкунандаи асосӣ барои бехатарии системи GNU/Linux-и шумо аст: " "шумо\n" "бояд гузарвожаи \"root\"-ро дохил кунед. \"root\" ин идаракунандаи систем " "буда танҳо\n" "вай метавонад афзоишҳо гузаронад, корвандҳо илова кунад, тамоми шакли " "системро\n" "иваз кунад, ва ғ. Кӯтоҳ карда гӯем \"root\" қодири ҳама кор мебошад! Барои " "ҳамин\n" "шумо бояд гузарвожае интихоб кунед, ки ҳадс задани он душвор бошад - агар он " "хуло\n" "содда бошад DrakX ба шумо хоҳад гуфт. Чӣ тавре, ки шумо дида метавонед, " "шумо\n" "метавонед гузарвожа дохил накарданро интихоб кунед, вале мо ба шуми " "баръакси\n" "он маслиҳат медиҳем танҳо барои як сабаб: гумон накунед, ки азбаски шумо\n" "GNU/Linux-ро худбор кардед, системҳои омили дигари шумо аз хатогӣ эминанд.\n" "Азбаски \"root\" ҳама маҳдудиятҳоро ва кӯркунии ногаҳонии додаҳоро дар " "бахшҳо\n" "бо қабулкунии беэҳтиётонаи худи бахшҳоро, гузашта метавонад барои ҳамин " "хеле\n" "муҳим аст, ки \"root\" шудан бояд душвор шавад.\n" "\n" "Гузарвожа бояд омехтаи аломатҳои алифбоӣ-ададие бошад, ки аққалан аз 8 " "аломат\n" "иборат аст. Ҳеҷ вақт гшузарвожаро \"root\" нанависед - ин таҳти хатар " "гузоштани\n" "системро хеле осон мекунад.\n" "\n" "Вале, гузарвожаро хеле дароз ё мураккаб накунед, чунки шумо бояд онро бе\n" "кӯшиши зиёд дар хотир ногоҳ доред.\n" "\n" "Ҳангоми гузарвожаро ҳуруфчинӣ кардан он дар экран намоиш дода намешавад.\n" "Барои ҳамин шумо бояд гузарвожаро, барои кам кардани имконияти ҳуруфчинии\n" "хатогӣ ду бор ҳуруфчинӣ кунед. Агар шумо як хатогии ҳуруфчиниро дар ҳар ду\n" "дафъа карда бошед, ин гузарвожаи \"хато\" бояд дар бори аввалине, ки шумо " "пайваст\n" "мешаваед истифода шавад.\n" "\n" "Дар усули мутахассисӣ аз шумо пурсида мешавад, ки оё шумо ба хидматрасони\n" "аслшинос ба монанди NIS ё LDAP пайваст хоҳед шуд.\n" "\n" "Агар шабакаи шумо қарордоди LDAP(ё NIS)-ро барои аслшиносӣ истифода мебурда\n" "бошад, \"LDAP\" (ё \"NIS\")-ро ҳамчун аслшинос интихоб кунед. Агар шумо " "надонед,\n" "аз идоракунандаи шабакаатон пурсед.\n" "\n" "Агар компютери шумо ба ягон шабакаи идорашаванда вайваст набошад, шумо " "мехоҳед,\n" "ки \"Файлҳои маҳаллӣ\"-ро барои аслшиносӣ интихоб кунед." #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" "Дар ин ҷо, вақти он расид, ки савияи бехатарии дилхоҳро барои мошина\n" "интихоб кунед. Аз рӯи қоида, чӣ қадаре, ки мошина бемуҳофизат аст ва чӣ " "қадаре\n" "ки додаҳое, ки дар он нигоҳ дошта мешаванд, ҳалкунанда бошанд, савияи " "бехатарӣ\n" "ҳамон қадар бояд баланд бошад. Аммо, одатан чӣ қадаре, ки савияи бехатарӣ " "баланд\n" "бошад онро ҳамон қадар истифода бурдан душвор. Ба порчаи MSEC-и \"Муроҷиаи\n" "раҳнамо\" барои маълумоти пурратар оид ба маънои ин савияҳо муроҷиат кунед." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Uses command %s" msgstr "Соҳиб %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "Дискети Худборшав" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Гурҷистон" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Хитой" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Хориҷкунии чопгар \"%s\"..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "хидматрасон" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Марҳамат ба ҶУСТУҶӮ интихобкунандаи системи омил!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Ҷустуҷӯ" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Системи чопкунро иваз кунед" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Иквадор" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "China (Hong Kong)" msgstr "Ҳонг Конг" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Ҷилд" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Синт Том Принсип" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Самуи Амрико" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Танзимдарории Хидматгори Поёнаи Mandrake" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Огоҳӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Ғеҷонидани файлҳо ба бахши нав" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "Итолиё" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Ҷахоири Кайман" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "ҷудокунии хатои %s: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Андозакунӣ" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Ҳаргуна" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Load setting" msgstr "кор андохтани гузориш" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Set selected printer as the default printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Литвониё" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Фишурда" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "Файлҳои маҳаллӣ" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Пономо" #: ../../standalone/drakTermServ:1 #, c-format msgid "Can't open %s!" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Монитор" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 ҳазор ранг (16 бит)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: true" msgstr "танзимдода нашуда" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Молӣ" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Файл/_Нигоҳ доштан" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "Тафсилот" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "Дидан" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "Идоракунии Дурдаст" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "Хидматрасони Хозод86: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/_Хосиятҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Танзимдарории Хидматгори Поёнаи Mandrake" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "Нигоҳ доштан" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Исроил" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Гинеи Фаронса" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "Соҳиб %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Kernel version" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Акнун вақте расид, ки барномаҳое, ки шумо ба системи худ кор гузоштан\n" "мехоҳед, муайян кунед. Барои Mandrake Linux ҳазорҳо қуттиҳои дастрас\n" "ҳастанд, ки шумо онҳоро аз афташ аз ёд дониста наметавонед.\n" "\n" "Агар шумо коргузориши оддӣ аз CDROM карда исттода бошед, аз шумо\n" "аввал хоҳиш карда мешавад, ки CD-ҳои доштаатонро муайян кунед(танҳо\n" "дар усули Мутахассис). Нишонаи CD-ро санҷед ва сандуқҳои ба CD-ҳои шумо\n" "мутобиқи барои коргузориш дастрасро рӯшан кунед. Вақте, ки шумо барои\n" "давом додан тайёр мешавед ба \"OK\" ангушт занед.\n" "\n" "Қуттиҳо аз рӯи истифодаи шахсии мошинаи шумо ба гурӯҳҳо мураттаб шудаанд.\n" "Худи гурӯҳҳо ба чор бахш мураттаб шудаанд:\n" "\n" " * \"Истгоҳи корӣ\": агар шумо мақсади мошинаи худро ҳамчун истгоҳи корӣ\n" "истифода бурдан хоҳед, як ё якчанд гурӯҳҳои мутобиқро интихоб кунед.\n" "\n" " * \"Тараққиёт\": агар мошина барои барномасозӣ бошад, гурӯҳ(ҳо)и дилхоҳро\n" "интихоб кунед.\n" "\n" " * \"Хидматрасон\":дар охир, агар мошина бо нияти хидмтрасон будан бошад,\n" "шумо қодири интихоби хадамоти умумие, ки шумо дар мошина коргузаштан\n" "мехоҳед хоҳед буд\n" "\n" " * \"Вазъияти Графикӣ\": ин ҷоест, ки шумо вазъияти графикии барои шумо\n" "афзалро интихоб хоҳед кард. Агар шумо хоҳед, ки истгоҳи кории графикӣ\n" "дошта бошед, аққалан яктояш бояд интихоб шавад!\n" "\n" "Ғеҷонидани нишоннамои муш аз болои номи гурӯҳ матни кӯтоҳе дар бораи ин\n" "гурӯҳ нишин хоҳад дод.\n" "\n" "Шумо метавонед сандуқи \"Интихоби шахсии қуттӣ\"-ро санҷед, ки агар шумо\n" "бо қуттиҳои пешниҳод шуда шинос бошед ё агар шумо идораи умумӣ аз болои\n" "ҳамаи чизҳои коргузошта шаванда доштан хоҳед фоиданок аст.\n" "Агар шумо коргузоришро дар усули \"Навкунӣ\" оғоз карда бошед, барои аз\n" "коргузориши ягон қуттии нав канора гирифтан, шумо метавонед ҳамаашро\n" "ноинтихоб кунед. Ин барои таъмир ё нав кардани системи вуҷуддошта\n" "фоиданок аст" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Қабули корванд" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Хидматрасон" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search new servers" msgstr "Ҷустуҷӯи хидматгорҳо" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Зомин ба усули мутахассис" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVD-R device" msgstr "дастгоҳ" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "Среда" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Олмон" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Утришш" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Шумо корандози худборшавро дар куҷо кор гузоштан мехоҳед?" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "Илтимос забони дилхоҳи худро барои коргузориш ва истифода интихоб кунед.\n" "\n" "Ангуштзанӣ дар дагмаи \"Пешрафта\" ба шумо имконият медиҳад, ки дигар\n" "забонҳое, ки бояд дар истгоҳӣ корӣ коргузориш шаванд интихоб кунед. " "Интихоби\n" "дигар забонҳо файлҳои забон муайян кунандаро барои ҳуҷҷатҳои систем ва " "замимаҳо\n" "кор хоҳад гузошт. Барои мисол, агар шумо корвандҳоро аз Испониё дар мошинаи " "худ\n" "қабул кунед, Англисиро ҳамчун забони асосӣ дар намуди шохагӣ интихоб кунед " "ва дар\n" "қисмати Пешрафта дар ситораи хокистарӣ муносиб бв \"Испониё|Испониёгӣ\" " "ангушт\n" "занед.\n" "\n" "Дар назар доред, ки якчанд забонҳо метавонанд коргузориш шаванд. Вақте, ки " "шумо\n" "ягон маҳали иловагтро интихоб кардед барои давом додан дар \"OK\" ангушт " "занед." #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "tape" msgstr "Лента" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Find Package" msgstr "%d қуттиҳо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Танзимдарории Навъи Худборшавӣ" #: ../../help.pm:1 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "Бозтанзимдарории автоматикӣ" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "Оғози Хидматгор" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Туркманистон" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "Мошинаҳои дастрас нест" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "Иловаи Корванд -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Науру" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" "Шумо LVM Logical Volume-ро ари нуқтаи васли %s истифода бурда наметавонед" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Croatia" msgstr "Офаридан" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "Иловаи корванд" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "" #: ../advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Дастгоҳ: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "Хосиятҳои Систем" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hd" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow remote root login" msgstr "Мошинаҳои дастрас нест" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "Шудагӣ" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Ҷудо кунӣ" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Лутфан, мунтазир шавед, ки интихобҳои бехатарӣ ба роҳ монда мешавад..." #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 ҳазор ранг (15 бит)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Гомбиё" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../../move/move.pm:1 #, c-format msgid "Reboot" msgstr "Бозхудборшавӣ" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " cable" msgstr "Ҷадвал" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "Гардони Хозод86: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Папуа Гинеи Нав" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on a parallel port" msgstr "" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Busy files" msgstr "Файлҳои системӣ нигоҳ дошта мешавад..." #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory where backups are stored" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "Воскресенье" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Ивази RAID" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Иловаи корванд" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-дискҳои %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Либериё" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Мунтазамкунии автоматикии Танзимдарории CUPS" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Номи файли loopback: %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Лутфан бандаре, ки чопгари шумо пайваст шудааст интихоб кунед." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Delay before booting the default image" msgstr "Пеш аз худборшавӣ андармони симои пешфарз" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 #, c-format msgid "Configure" msgstr "Танзим додан" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "Userdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "Мавзӯи нав офаред" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "Маълумоти сахтгардон" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "Сахтафзори муайяншуда" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Озарбойҷон" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "ҳалнокии хотимавӣ" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Auto configuration" msgstr "Танзимдарории интихобӣ" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4МБ" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Game station" msgstr "" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Mail" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "Хидматгори Пост" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" #~ msgid "The setup has already been done, and it's currently enabled." #~ msgstr "" #~ "Барпо созӣ аллакай иҷро шуда буд ва ҳоло он ба кор дароварда шудааст." #~ msgid "Logs" #~ msgstr "Номнависӣ" #, fuzzy #~ msgid "Hostname configuration" #~ msgstr "Танзимдарории систем" #, fuzzy #~ msgid "Hostname" #~ msgstr "Номи корванд" #~ msgid "Remote Printers" #~ msgstr "Чопгарҳои Дурдаст" #, fuzzy #~ msgid "Level 1" #~ msgstr "Савия" #, fuzzy #~ msgid "Level 2" #~ msgstr "Савия" #, fuzzy #~ msgid "Level 3" #~ msgstr "Савия" #, fuzzy #~ msgid "Level 4" #~ msgstr "Савия" #, fuzzy #~ msgid "Level 5" #~ msgstr "Савия" #, fuzzy #~ msgid "Load" #~ msgstr "Лаҳистон" #~ msgid "Please relog into %s to activate the changes" #~ msgstr "Лутфан барои фаъол кардани ивазҳо ба %s бозсабт шавед" #~ msgid "path" #~ msgstr "роҳ" #~ msgid "delete" #~ msgstr "нобуд кардан" #~ msgid "user" #~ msgstr "корванд" #~ msgid "Expert Area" #~ msgstr "Соҳаи Мутахассис" #~ msgid "Wizard..." #~ msgstr "Устод..." #~ msgid "Previous" #~ msgstr "Пештара" #~ msgid "Please check if you are using CDRW media" #~ msgstr "Лутфан тафтиш кунед ки шумо муҳити CDRW истифода бурда истодаед" #~ msgid "Copy %s to %s" #~ msgstr "%s-ро ба %s нусхабардоред" #~ msgid "Author:" #~ msgstr "Муаллиф:" #~ msgid "User interfaces" #~ msgstr "Интерфейсҳои корванд" #~ msgid "Launch Aurora at boot time" #~ msgstr "Сардиҳии Aurora дар вақти худборшавӣ" #~ msgid "Traditional Gtk+ Monitor" #~ msgstr " Монитори Gtk+ Оддӣ" #~ msgid "Traditional Monitor" #~ msgstr "Монитори Оддӣ" #~ msgid "NewStyle Monitor" #~ msgstr "Монитори Навъи Нав" #~ msgid "NewStyle Categorizing Monitor" #~ msgstr "Монитори Синфбанди Навъи Нав" #~ msgid "/Options" #~ msgstr "/Хосиятҳо" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "Бахше, ки шумо барои ҳамчун root (/) илова кардан интихоб кардедберун аз\n" #~ "силиндри 1024-и сахтгардон ҷойгир аст, ва шумо /бахши худборшав надоред.\n" #~ "Агар шумо мақсади истифодаи менеҷери пурборкунии LILO-ро дошт бошед, " #~ "албаттабахши пурборкуниро илова кунед" #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "Узр, ман офаридан /boot дар гардон (дар силиндр > 1024) қабул " #~ "намекунам.\n" #~ "Ё шумо LILO-ро истифода мебаред ва он кор намекунад, ё шумо LILO-ро " #~ "истифода намебаред ва шумо ба /boot эҳтиёҷ надоред" #~ msgid "Please be patient. This operation can take several minutes." #~ msgstr "Илтимос пуртоқат бошед. Ин омил метавонад якчанд дақиқаро гирад." #~ msgid "" #~ "Your new Mandrake Linux operating system is currently being installed.\n" #~ "Depending on the number of packages you will be installing and the speed " #~ "of\n" #~ "your computer, this operation could take from a few minutes to a\n" #~ "significant amount of time.\n" #~ "\n" #~ "Please be patient." #~ msgstr "" #~ "“Системи омили нави Mandrake Linux-и шумо ҳозир коргцузошта шуда " #~ "истодааст.\n" #~ "”“Вобаста ба шумораи қуттиҳое, ки шумо кор хоҳед гузошт ва суръати " #~ "компютери шумо, ин амалиёт аз якчанд дақиқа то вақти зиёд гирифтанаш " #~ "мумкин.\n" #~ "”“\n" #~ "”“Илтимос пуртоқат бошед.”" #~ msgid "FAT" #~ msgstr "FAT" #~ msgid "Formatting loopback file %s" #~ msgstr "Шаклбандии файли loopback-и %s" #~ msgid "Formatting" #~ msgstr "Шаклбандӣ" #~ msgid "Local printers available on: " #~ msgstr "Чопгарҳои маҳаллӣ дастрасанд дар: " #~ msgid "Boot from DOS/Windows (loadlin)" #~ msgstr "Худборшави аз DOS/Windows (loadlin)" #~ msgid "Remove entry" #~ msgstr "Хориҷи элемент" #~ msgid "Choose options for server" #~ msgstr "Хусусиятҳоро барои хидматрасон интихоб кунед" #~ msgid "Graphic card not configured yet" #~ msgstr "Карти графикӣ ҳоло танзим дода нашудааст" #~ msgid "Resolutions not chosen yet" #~ msgstr "Ҳалнокиҳо ҳоло интихоб нашудаанд" #~ msgid "" #~ "\n" #~ "try to change some parameters" #~ msgstr "" #~ "\n" #~ "“баъзе параметрҳоро иваз кунед ”" #~ msgid "An error has occurred:" #~ msgstr "Хатогие рух дод:" #~ msgid "XFree86 server: %s" #~ msgstr "Хидматрасони XОзод86: %s" #~ msgid "Show all" #~ msgstr "Ҳамаашро нишон диҳед" #~ msgid "Preparing X-Window configuration" #~ msgstr "Тайркунии шакли X-Window" #~ msgid "What do you want to do?" #~ msgstr "Шумо чӣ кор кардан мехоҳед?" #~ msgid "Change Monitor" #~ msgstr "Ивази Монитор" #~ msgid "Change Graphic card" #~ msgstr "Ивази карти Графикӣ" #~ msgid "Change Server options" #~ msgstr "Ивази хосиятҳои Хидматрасон" #~ msgid "Test again" #~ msgstr "Боз санҷидан" #~ msgid "X at startup" #~ msgstr "X дар оғоз" #~ msgid "Standard VGA, 640x480 at 60 Hz" #~ msgstr "VGA-и муқаррарӣ, 640х480 бо 60 Ҳз" #~ msgid "Super VGA, 800x600 at 56 Hz" #~ msgstr "VGA-и Олӣ, 800х600 бо 56 Ҳз" #~ msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" #~ msgstr "8514 Ҳамсоз, 1024х768 бо 87 Ҳз печида (800х600 не)" #~ msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" #~ msgstr "VGA-и Олӣ, 1024х768 бо 87 Ҳз печида, 800х600 бо 56 Ҳз" #~ msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" #~ msgstr "VGA-и Олии Васеъшуда, 800х600 бо 60 Ҳз, 640х480 бо 72 Ҳз" #~ msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" #~ msgstr "SVGA-и Напчида, 1024х768 бо 60 Ҳз, 800х600 бо 72 Ҳз" #~ msgid "High Frequency SVGA, 1024x768 at 70 Hz" #~ msgstr "SVGA-и Баланд Басомад, 1024х768 бо 70 Ҳз" #~ msgid "Multi-frequency that can do 1280x1024 at 60 Hz" #~ msgstr "Бисёр-басомад, ки 1280х1024 бо 60 Ҳз карда метавонад" #~ msgid "Multi-frequency that can do 1280x1024 at 74 Hz" #~ msgstr "Бисёр-басомад, ки 1280х1024 бо 74 Ҳз карда метавонад" #~ msgid "Multi-frequency that can do 1280x1024 at 76 Hz" #~ msgstr "Бисёр-басомад, ки 1280х1024 бо 76 Ҳз карда метавонад" #~ msgid "Monitor that can do 1600x1200 at 70 Hz" #~ msgstr "Мониторе, ки 1600х1200 бо 70 Ҳз карда метавонад" #~ msgid "Monitor that can do 1600x1200 at 76 Hz" #~ msgstr "Мониторе, ки 1600х1200 бо 76 Ҳз карда метавонад" #~ msgid "LBA (doesn't work on old BIOSes)" #~ msgstr "LBA (дар BIOS-ҳои кӯҳна кор намекунад)" #~ msgid "You may now provide its options to module %s." #~ msgstr "Акнун шумо метавонед хосиятҳои онро ба модули %s таъмин кунед." #~ msgid "no help implemented yet.\n" #~ msgstr "ягон ёрӣ ҳоло вуруд нашудааст\n" #~ msgid "can not open /etc/inittab for reading: %s" #~ msgstr "/etc/inittab барои хониш кушода намешавд: %s" #~ msgid "" #~ "Please click on a button above\n" #~ "\n" #~ "Or use \"New\"" #~ msgstr "" #~ "Илтимос дар дагмаи дар боло буда ангушт занед\n" #~ "\n" #~ "Ё \"Нав\"-ро истифода баред" #~ msgid "Use \"New\"" #~ msgstr "\"Нав\"-ро истифода баред" #~ msgid "Scanning available nfs shared resource" #~ msgstr "Нуқтасанҷии сарчашмаи тақсимшудаи дастраси nfs" #~ msgid "Scanning available nfs shared resource of server %s" #~ msgstr " Нуқтасанҷии сарчашмаи тақсимшудаи дастраси nfs-и хидматрасони %s" #~ msgid "If the list above doesn't contain the wanted entry, enter it here:" #~ msgstr "" #~ "Агар элементи даркор дар рӯйхати болобуда набошад, онро ин ҷо дохил кунед:" #~ msgid "Shared resource" #~ msgstr "Сарчашмаи тақсимшуда" #~ msgid "Scanning available samba shared resource" #~ msgstr "Нуқтасанҷии сарчашмаи тақсимшудаи samba-и дастрас" #~ msgid "Scanning available samba shared resource of server %s" #~ msgstr "Нуқтасанҷии сарчашмаи тақсимшудаи samba-и дастраси хидматрасони %s" #~ msgid "mount failed" #~ msgstr "васлкунӣ нагузашт" #~ msgid "fsck failed with exit code %d or signal %d" #~ msgstr "fsck нагузашт бо рамзи кушоди %d ё сигнали %d" #~ msgid "" #~ "GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it " #~ "in\n" #~ "local time according to the time zone you selected." #~ msgstr "" #~ "“GNU/Linux вақтро дар GMT (Идораи Вақти Гринвич) идора карда онро ба " #~ "вақти маҳаллӣ вобаста ба вақти минтақавии интихобкардаи шумо " #~ "мегузаронад.\n" #~ "”" #~ msgid "" #~ "The first time you try the X configuration, you may not be very " #~ "satisfied\n" #~ "with its display (screen is too small, shifted left or right...). Hence,\n" #~ "even if X starts up correctly, DrakX then asks you if the configuration\n" #~ "suits you. It will also propose to change it by displaying a list of " #~ "valid\n" #~ "modes it could find, asking you to select one.\n" #~ "\n" #~ "As a last resort, if you still cannot get X to work, choose \"Change\n" #~ "graphics card\", select \"Unlisted card\", and when prompted on which\n" #~ "server you want, choose \"FBDev\". This is a failsafe option which works\n" #~ "with any modern graphics card. Then choose \"Test again\" to be sure." #~ msgstr "" #~ "Бори аввал, вақте, ки шумо танзимдарории Х-ро санҷида мебинед, мумкин " #~ "шумо\n" #~ "бо намоиши он қонеъ нашаведэ (экран хело майда, ба тарафи рост ё чап\n" #~ "ғеҷида...). Аз ҳамин сабаб, ҳатто вақте, ки Х дуруст оғоз меёбад, DrakX\n" #~ "аз шумо хоҳад пурсид, ки оё танзимдарорӣ ба шумо мувофиқ аст. Инчунин он\n" #~ "бо нишон додани рӯйхати усулҳои ҳақиқие, ки он ёфта метавонад аз шумо\n" #~ "хоҳиш мекунад, ки яктояшро интихоб кунед ва ба шумл пешниҳод мекунад,\n" #~ "ки танзимдарориро иваз кунед.\n" #~ "\n" #~ "Ҳамчун роҳи охирин, агар шумо ҳоло ҳа Х-ро ба кор дароварда натавониста\n" #~ "бошед, \"Иваз арти графикӣ\"-ро интихоб кунед, \"Карти ба қайд гирифта\n" #~ "нашуда\"-ро интихоб кунед, ва вақте ки аз шумо пурсида мешавад шумо двр\n" #~ "кадом хидматрасон мехоҳед, \"FBDev\"-ро интихоб кунед. Ин хосияти\n" #~ "худхомӯшнашаваедаест, ки бо ҳама картҳои графикии муосир кор мекунад.\n" #~ "Баъд барои мӯътақид шудан \"Боз санҷидан\"-ро интихоб кунед." #~ msgid "" #~ "DrakX now needs to know if you want to perform a default (\"Recommended" #~ "\")\n" #~ "installation or if you want to have greater control (\"Expert\"). You " #~ "also\n" #~ "have the choice of performing a new install or an upgrade of an existing\n" #~ "Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n" #~ "old system. Select \"Upgrade\" if you are upgrading or repairing an\n" #~ "existing system.\n" #~ "\n" #~ "Please choose \"Install\" if there are no previous version of Mandrake\n" #~ "Linux installed or if you wish to boot between various operating " #~ "systems.\n" #~ "\n" #~ "Please choose \"Update\" if you wish to update or repair an already\n" #~ "installed version of Mandrake Linux.\n" #~ "\n" #~ "Depending on your knowledge of GNU/Linux, please choose one of the\n" #~ "following to install or update your Mandrake Linux operating system:\n" #~ "\n" #~ " * Recommended: choose this if you have never installed a GNU/Linux\n" #~ "operating system. The installation will be very easy and you will only " #~ "be\n" #~ "asked a few questions.\n" #~ "\n" #~ " * Expert: if you have a good knowledge of GNU/Linux, you can choose " #~ "this\n" #~ "installation class. The expert installation will allow you to perform a\n" #~ "highly customized installation. Answering some of the questions can be\n" #~ "difficult if you do not have a good knowledge of GNU/Linux so do not " #~ "choose\n" #~ "this unless you know what you are doing." #~ msgstr "" #~ "DrakX акнун бояд донад, ки оё шумо коргузориши пешфарз (\"Тавсия шудааст" #~ "\")\n" #~ "ё шумо идораи бештар (\"Мутахассисӣ\") кардан мехоҳад. Шумо ҳамчунин " #~ "интихоби\n" #~ "коргузориши нав ё афзоиши системи Mandrake Linux-и вуҷуд доштаро доред.\n" #~ "Ангуштзании \"Коргузориш\" системи кӯҳнаи шуморо пурра пок хоҳад кард.\n" #~ "\"Афзоиш\"-ро интихоб кунед агар шумо афзоиш додан ё таъмири системи " #~ "вуҷуд\n" #~ "доштаро хоҳед.\n" #~ "\n" #~ "Илтимос \"Коргузориш\"-ро интихоб кунед, агар нусхаи пештараи Mandrake " #~ "Linux\n" #~ "коргузошта нашуда бошад ё агар хоҳед, ки байни системҳои омили гуногун\n" #~ "худборшудан хоҳед.\n" #~ "\n" #~ "\"На кардан\"-ро интихоб кунед агар хоҳед, ки нусхаи аллакай мавҷуди " #~ "Mandrake\n" #~ "Linux-ро нав кардан ё таъмир кардан хоҳед.\n" #~ "\n" #~ "Вобаста ба дониши шумо оид ба GNU/Linux, яке аз зербударо барои " #~ "коргузориш ё\n" #~ "афзоиш додани системи омили Mandrake Linux-и худ, интихоб кунед.\n" #~ "\n" #~ " * Тавсия шуда: инро интихоб кунед агар шумо ягон бор системи омили\n" #~ "GNU/Linux-ро коргузошта набошед. Коргузориш осон хоҳад буд ва аз шумо " #~ "танҳо\n" #~ "якчанд саволҳо пурсида мешавад.\n" #~ "\n" #~ " * Мутахассисӣ: агар шумо дониши хуб оид ба GNU/Linux дошта бошед, шумо " #~ "ин\n" #~ "намуди коргузоришро интихоб карда метавонед. Коргузориши мутахассисӣ ба " #~ "шумо\n" #~ "иҷозат медиҳад, ки коргузориши ботартибро гузаронед. Ҷавобдиҳӣ ба баъзе " #~ "саволҳо\n" #~ "мумкин душвор бошад, агар шумо дониши хуб оид ба GNU/Linux надошта бошед\n" #~ "онро интихоб накунед, танҳо дар он вақте ки шумо чӣ кор карданатонро " #~ "надонед."