# SOME DESCRIPTIVE TITLE. # Copyright (C) 2002 MandrakeSoft # # NOTE: the charset= value changed to "cp1252" to avoid problems with # msgmerge when building. # # prabu <prabu_anand2000@yahoo.com> # msgid "" msgstr "" "Project-Id-Version: DrakX 1.0\n" "POT-Creation-Date: 2002-09-20 11:43+0200\n" "PO-Revision-Date: 2002-09-06 00:35+0800\n" "Last-Translator: prabu anand <prabu_anand2000@yahoo.com>\n" "Language-Team: Tamil <ta@li.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CP1252\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kB ���ġ���" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kB ���ġ���" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB �������" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB �������" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB �������" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB �������" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB �������" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB �������" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB ������� ���� ���� �������" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "X-�â��Ȣ��� ���� ���" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X-�â��Ȣ" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "������¸ ��Ũ���" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "���� ����� ����� ������¸ ��Ũ����� �Ũ�� �����\n" "����� ��� ���� Ţ��Ҹ�ȣ���?" #: ../../Xconfig/card.pm_.c:286 msgid "Select the memory size of your graphics card" msgstr "���� ���¨��� ��¢� ����Ÿ�� �Ǩ�� ��������" #: ../../Xconfig/card.pm_.c:347 msgid "XFree configuration" msgstr "X ��Ũ���" #: ../../Xconfig/card.pm_.c:349 msgid "Which configuration of XFree do you want to have?" msgstr "��Ţ� X ��Ũ���� ����즸��� Ţ��Ҹ�ȣ���?" #: ../../Xconfig/card.pm_.c:381 msgid "Configure all heads independently" msgstr "����� ���ø���� �ɢ�ɢ¡� ��Ũ����" #: ../../Xconfig/card.pm_.c:382 msgid "Use Xinerama extension" msgstr "��ɢá�� �����Ҹ�� ��������" #: ../../Xconfig/card.pm_.c:387 #, c-format msgid "Configure only card \"%s\"%s" msgstr "\"%s\"%s ��� �𨼨� ���� ��Ũ����" #: ../../Xconfig/card.pm_.c:399 ../../Xconfig/card.pm_.c:400 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "X- %s" #: ../../Xconfig/card.pm_.c:411 ../../Xconfig/card.pm_.c:437 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "������� ����м� ��� 3D X- %s" #: ../../Xconfig/card.pm_.c:414 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "������ 3D ������� ����м� ź���� X %s ���� ��� �������. �ɡ� \n" "X %s � ���� 2D �������� �����ġ�. ���� �â¡� ���� 4 �� ��� �������" #: ../../Xconfig/card.pm_.c:416 ../../Xconfig/card.pm_.c:439 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "������ 3D ������� ����м� X %s �������" #: ../../Xconfig/card.pm_.c:424 ../../Xconfig/card.pm_.c:445 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "������ 3D ������� ����м� X %s �á� Ө�¢� �������" #: ../../Xconfig/card.pm_.c:427 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "������ 3D ������� ����м� X %s �á� Ө�¢� ������� �ɡ� �� ���� �����" "�� ���Ģ��� ����ġ�\n" "X %s � ���� 2D �������� �����ġ�. ���� �â¡� ���� 4 �� ��� �������" #: ../../Xconfig/card.pm_.c:430 ../../Xconfig/card.pm_.c:447 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "������ 3D ������� ����м� X %s �á� Ө�¢� ������� �ɡ� �� ���� ������� " "���Ģ��� ����ġ�" #: ../../Xconfig/card.pm_.c:453 msgid "Xpmac (installation display driver)" msgstr "Xpmac(���¨��� ��¢� ��� ����)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:978 msgid "Custom" msgstr "�ɢ���ɡ��" #: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "���¨��� ��" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "����¸�" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:209 msgid "Resolution" msgstr "�â������" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "������" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:385 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Ţ������" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:268 #: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:275 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:166 #: ../../standalone/drakbackup_.c:3974 ../../standalone/drakbackup_.c:4069 #: ../../standalone/drakbackup_.c:4088 msgid "Ok" msgstr "�â" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3207 #: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:225 msgid "Quit" msgstr "��Ǣ�" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "�� �������� ���ʧ� ����즸����ȣ��ǡ?\n" "�������� ��Ũ���\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "����¸� ����� ���" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "Plug'n Play -1997 �� ���� �� ����¸��� ��Ũ���� ����" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "����-�� ����¸�" #: ../../Xconfig/monitor.pm_.c:99 ../../harddrake/ui.pm_.c:37 msgid "Vendor" msgstr "Ţ����" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "��ɡ� ���� Ө� ���Ȣ���Ţ���.��צ��� �â¡� ����¸�.��������" #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "��� ����� ����� ������� ���� ����¸� ��Ȣ�� ���Ģ��� ���� Ţ�ġ�. \n" "������ ������� ��Ȣ ��â�� ���� ��Χ� ����Ǩ� \n" "�������. \n" "\n" "����¸�� ���� ���� ����� ����� �������\n" "\n" "������� ��Ȣ� ţ��ǧ� ����� ������� \n" "��ȡ� ���� ���� ����� ������ ����¸� ��Ȣ�� ���Ģ��� ����ġ�" #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "����¡� ���� ţ��" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "������ ���� ţ��" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 ����� (8 ���θ�)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32000 ����� (15 ���θ�)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65000 ����� (16 ���θ�)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 ���Ģ�� ����� (24 ���θ�)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 ���Ģ�� ����� (32 ���θ�)" #: ../../Xconfig/resolution_and_depth.pm_.c:129 msgid "Resolutions" msgstr "�â������" #: ../../Xconfig/resolution_and_depth.pm_.c:254 msgid "Choose the resolution and the color depth" msgstr "������ Ţ������ �â���������, �������� ��������" #: ../../Xconfig/resolution_and_depth.pm_.c:255 #, c-format msgid "Graphics card: %s" msgstr "���¨��� ��: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1019 #: ../../bootlook.pm_.c:344 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:354 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:195 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2169 #: ../../security/main.pm_.c:216 ../../standalone/drakautoinst_.c:203 #: ../../standalone/drakbackup_.c:3928 ../../standalone/drakbackup_.c:3961 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4014 #: ../../standalone/drakbackup_.c:4041 ../../standalone/drakbackup_.c:4101 #: ../../standalone/drakbackup_.c:4128 ../../standalone/drakbackup_.c:4158 #: ../../standalone/drakbackup_.c:4184 ../../standalone/drakconnect_.c:115 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 #: ../../standalone/drakfloppy_.c:235 ../../standalone/drakfont_.c:970 #: ../../standalone/drakgw_.c:560 ../../standalone/logdrake_.c:225 #: ../../ugtk.pm_.c:296 msgid "Cancel" msgstr "����" #: ../../Xconfig/test.pm_.c:30 msgid "Test of the configuration" msgstr "��Ũ��� ������� ������θ���" #: ../../Xconfig/test.pm_.c:31 msgid "Do you want to test the configuration?" msgstr "���� ��Ũ���� ������� ���� ������? [������� ������ �츢��]" #: ../../Xconfig/test.pm_.c:31 msgid "Warning: testing this graphic card may freeze your computer" msgstr "��â쨸; ���¨��� �𨼨� �������� ���� ������� Ӽ�����" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Ţ����Ĩ�¢� �� ���� %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "�Ģ¢� Ũ�: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "�Ģ¢� Ũ�: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "����¸�: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "����¸�� ����¡� ����� %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "����¸�� ������ ����� %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "���¨��� �� %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "���¨��� ��¢� ����Ÿ ���: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "����Ǣ� ���: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "�â����: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "X �â��Ȣ: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "X �â��Ȣ¢� ���� ���� %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "����� ���� Ũ�Ţ���Ƣ¢� ���̸" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "��ɡ� ���� ������� ����� ���� Ũ�Ţ���Ƣ¢� ��� ����.\n" "���š� Ө� ����� ���������� X ��������?" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "���� ���¨��� ��¢� �Ţ측� ���Ӹ� ����.\n" "����������� ��� ���� ��Ũ��ġ�.\n" ".\n" "�� �â¡� �Ũ�� ���� ����� ����� �������� ���� �ŢԼ� ������ �����\n" "���̿��Ģ� �Ţ-�Ƣ ����� ����� ������ �Ţ¢� ����ġ�\n" "\n" "����� ���� ��� ���� �����ȣ��ǡ?" #: ../../Xconfig/various.pm_.c:85 msgid "What norm is your TV using?" msgstr "���� �Ţ �� ���� Ũç���� ��� �ո���?" #: ../../any.pm_.c:108 ../../any.pm_.c:133 msgid "First sector of boot partition" msgstr "����Ÿ���Ģ� Ӿ� Ţ�" #: ../../any.pm_.c:108 ../../any.pm_.c:133 ../../any.pm_.c:210 msgid "First sector of drive (MBR)" msgstr "������Ӿ��� Ţ�Ģ� " #: ../../any.pm_.c:112 msgid "SILO Installation" msgstr "���ġ �����" #: ../../any.pm_.c:113 ../../any.pm_.c:126 msgid "Where do you want to install the bootloader?" msgstr "���� ���̿�è� ��� ���� Ţ��Ҹ�ȣ���?" #: ../../any.pm_.c:125 msgid "LILO/grub Installation" msgstr "Ģ�ġ/���� �����" #: ../../any.pm_.c:137 ../../any.pm_.c:151 msgid "SILO" msgstr "���ġ" #: ../../any.pm_.c:139 msgid "LILO with text menu" msgstr "����Ƣ Ģ�ġ" #: ../../any.pm_.c:140 ../../any.pm_.c:151 msgid "LILO with graphical menu" msgstr "Ũ�Ţ���Ƣ Ģ�ġ" #: ../../any.pm_.c:143 msgid "Grub" msgstr "����" #: ../../any.pm_.c:147 msgid "Boot from DOS/Windows (loadlin)" msgstr "���/Ţ������Ģ��� ����" #: ../../any.pm_.c:149 ../../any.pm_.c:151 msgid "Yaboot" msgstr "¡�������" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader main options" msgstr "���̿��Ģ� �츢� Ţ������" #: ../../any.pm_.c:160 ../../any.pm_.c:191 msgid "Bootloader to use" msgstr "������ ����� ���̿���" #: ../../any.pm_.c:162 msgid "Bootloader installation" msgstr "���̿��� ������θ���" #: ../../any.pm_.c:164 ../../any.pm_.c:193 msgid "Boot device" msgstr "���� �����" #: ../../any.pm_.c:165 msgid "Compact" msgstr "�������" #: ../../any.pm_.c:165 msgid "compact" msgstr "�������" #: ../../any.pm_.c:166 ../../any.pm_.c:291 msgid "Video mode" msgstr "�Ǣ�� ӨȨ�" #: ../../any.pm_.c:168 msgid "Delay before booting default image" msgstr "��������� ���� ����ž�측� ����" #: ../../any.pm_.c:170 ../../any.pm_.c:789 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:865 ../../printerdrake.pm_.c:980 #: ../../standalone/drakbackup_.c:3530 ../../standalone/drakconnect_.c:624 #: ../../standalone/drakconnect_.c:649 msgid "Password" msgstr "�����" #: ../../any.pm_.c:171 ../../any.pm_.c:790 #: ../../install_steps_interactive.pm_.c:1098 msgid "Password (again)" msgstr "����� (�����)" #: ../../any.pm_.c:172 msgid "Restrict command line options" msgstr "����Ƣ¢� ���������� Ţ�������� �������" #: ../../any.pm_.c:172 msgid "restrict" msgstr "�������" #: ../../any.pm_.c:174 msgid "Clean /tmp at each boot" msgstr "/tmp ����� ���š� Ө�� ���������� Ш��� Ţ�" #: ../../any.pm_.c:175 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "�â¡� ����Ÿ� ��âŢ���(���� ��� %d MB)" #: ../../any.pm_.c:177 msgid "Enable multi profiles" msgstr "����� ������ ���� �Ȣ�Ҹ�� ��֨������" #: ../../any.pm_.c:181 msgid "Give the ram size in MB" msgstr "�â¡� ����Ÿ� ��������� ��âŢ���" #: ../../any.pm_.c:183 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Option ``Restrict command line options'' ���� ����� ���Ħ��ȡ� ������" #: ../../any.pm_.c:184 ../../any.pm_.c:765 #: ../../diskdrake/interactive.pm_.c:1195 #: ../../install_steps_interactive.pm_.c:1092 msgid "Please try again" msgstr "����� ������� ������" #: ../../any.pm_.c:184 ../../any.pm_.c:765 #: ../../install_steps_interactive.pm_.c:1092 msgid "The passwords do not match" msgstr "������� ����� ��ȡ� ����" #: ../../any.pm_.c:192 msgid "Init Message" msgstr "Ӿ� �����" #: ../../any.pm_.c:194 msgid "Open Firmware Delay" msgstr "Open Firmware �����" #: ../../any.pm_.c:195 msgid "Kernel Boot Timeout" msgstr "������ ��Ǣ���� ���� ����Ţ��" #: ../../any.pm_.c:196 msgid "Enable CD Boot?" msgstr "���¢� ���� ������ġ��?" #: ../../any.pm_.c:197 msgid "Enable OF Boot?" msgstr "OF�� ���� ������ġ��?" #: ../../any.pm_.c:198 msgid "Default OS?" msgstr "��������� ��� �����?" #: ../../any.pm_.c:232 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "����� ���̿�è� �� Ÿ�â� ����ȣ���\n" "���� ������ ����� �� ���̿��� ����� ���� ����š� �����.\n" "\n" "����� �� ������ ���� ���� Ţ��Ҹ�ȣ���?" #: ../../any.pm_.c:248 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "���� ���� ��� ���� ����\n" "��� ����� Ţ���� ���� ���Ȣ¨��ġ�" #: ../../any.pm_.c:258 ../../standalone/drakbackup_.c:1560 #: ../../standalone/drakbackup_.c:1673 ../../standalone/drakfont_.c:1011 #: ../../standalone/drakfont_.c:1054 msgid "Add" msgstr "���" #: ../../any.pm_.c:258 ../../any.pm_.c:777 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printerdrake.pm_.c:3207 ../../standalone/drakbackup_.c:2774 msgid "Done" msgstr "����" #: ../../any.pm_.c:258 msgid "Modify" msgstr "����" #: ../../any.pm_.c:266 msgid "Which type of entry do you want to add?" msgstr "����� �� ��� �����측� Ѩƨ� ���� �����ȣ���?" #: ../../any.pm_.c:267 ../../standalone/drakbackup_.c:1707 msgid "Linux" msgstr "Ģ��" #: ../../any.pm_.c:267 msgid "Other OS (SunOS...)" msgstr "��� ��� �������(��...)" #: ../../any.pm_.c:268 msgid "Other OS (MacOS...)" msgstr "��� ��� �������(���...)" #: ../../any.pm_.c:268 msgid "Other OS (windows...)" msgstr "��� ��� �������(Ţ�����...)" #: ../../any.pm_.c:287 msgid "Image" msgstr "�������" #: ../../any.pm_.c:288 ../../any.pm_.c:299 msgid "Root" msgstr "���" #: ../../any.pm_.c:289 ../../any.pm_.c:317 msgid "Append" msgstr "������" #: ../../any.pm_.c:293 msgid "Initrd" msgstr "Ӿ� �������" #: ../../any.pm_.c:294 msgid "Read-write" msgstr "�ؾ-���" #: ../../any.pm_.c:301 msgid "Table" msgstr "��Ũ�" #: ../../any.pm_.c:302 msgid "Unsafe" msgstr "��и�����ġ��" #: ../../any.pm_.c:309 ../../any.pm_.c:314 ../../any.pm_.c:316 msgid "Label" msgstr "���¡��" #: ../../any.pm_.c:311 ../../any.pm_.c:321 ../../harddrake/v4l.pm_.c:200 msgid "Default" msgstr "���������" #: ../../any.pm_.c:318 msgid "Initrd-size" msgstr "Ӿ� �������� ���" #: ../../any.pm_.c:320 msgid "NoVideo" msgstr "�Ǣ�����ġ��" #: ../../any.pm_.c:328 msgid "Remove entry" msgstr "Ѩ�Ţ�� ����" #: ../../any.pm_.c:331 msgid "Empty label not allowed" msgstr "���� ���¡������ �����¢���" #: ../../any.pm_.c:332 msgid "You must specify a kernel image" msgstr "����� ����� �� ��Ţ� ������� ����� ���� �����" #: ../../any.pm_.c:332 msgid "You must specify a root partition" msgstr "����� ����� �� �� Ÿ��� ����� ���� �����" #: ../../any.pm_.c:333 msgid "This label is already used" msgstr "�� ���¡�� ���ɧ� �������� ����" #: ../../any.pm_.c:657 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s ���Ӹ �𨼸� ����" #: ../../any.pm_.c:658 msgid "Do you have another one?" msgstr "���� ����š?" #: ../../any.pm_.c:659 #, c-format msgid "Do you have any %s interfaces?" msgstr "����� %s ���Ӹ �𨼸� ����� ������и�Ȣ��ǡ?" #: ../../any.pm_.c:661 ../../any.pm_.c:824 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 msgid "No" msgstr "����" #: ../../any.pm_.c:661 ../../any.pm_.c:823 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 msgid "Yes" msgstr "��" #: ../../any.pm_.c:662 msgid "See hardware info" msgstr "�������Ǣ� Ţ������� ������" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:678 #, c-format msgid "Installing driver for %s card %s" msgstr "%s �� %s �� ���� ���� ������θ���" #: ../../any.pm_.c:679 #, c-format msgid "(module %s)" msgstr "(%s ��)" #: ../../any.pm_.c:690 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "%s.��측� Ţ������� ������\n" "0x like '0x123' ����� ����м� �� ��츧����" #: ../../any.pm_.c:696 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "%s.��측� Ţ������� ������\n" "����=����� ��� ������� ��츧����...''.\n" "�������� , ``io=0x300 irq=7''" #: ../../any.pm_.c:698 msgid "Module options:" msgstr "�� ����Ҹ�" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:710 #, c-format msgid "Which %s driver should I try?" msgstr "�� %s �� �� ��� ��è� ������ �����?" #: ../../any.pm_.c:719 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "�� %s �� �� ��� ��è� ������ ���\n" "���� Ţ����� ����. ��� ����� �ո�ȣ��ǡ���� \n" "ʧ��x ��ɢ��� ����Ȣ�� ��������\n" "�� ��������� ���� ����� ������ ������ ���� ����ġ�\n" "�ɡ� ������ ���Ģ��� ���¡�" #: ../../any.pm_.c:723 msgid "Autoprobe" msgstr "��ɢ��� ����Ȣ��" #: ../../any.pm_.c:723 msgid "Specify options" msgstr "Ţ������ ��âŢ���" #: ../../any.pm_.c:735 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s ��� ��� ���� ����� ���� ��������\n" "����� ��� Ţ������� ��âŢ�� ������" #: ../../any.pm_.c:751 msgid "access to X programs" msgstr "X ������측� �����" #: ../../any.pm_.c:752 msgid "access to rpm tools" msgstr "rpm ������ ��Ţ��측� �����" #: ../../any.pm_.c:753 msgid "allow \"su\"" msgstr "\"su\" ���š��¡� ���� ��Ǩ� �����" #: ../../any.pm_.c:754 msgid "access to administrative files" msgstr "���š� ����Ҹ��� �����" #: ../../any.pm_.c:755 msgid "access to network tools" msgstr "Ũ�¨���� ��Ţ���� �����" #: ../../any.pm_.c:756 msgid "access to compilation tools" msgstr "��Ţ��측� �����" #: ../../any.pm_.c:761 #, c-format msgid "(already added %s)" msgstr "(%s ���ɧ� ��������Ţ��)" #: ../../any.pm_.c:766 msgid "This password is too simple" msgstr "�� ����� ��� �Ǣ��� ����" #: ../../any.pm_.c:767 msgid "Please give a user name" msgstr "������ �� ���� ����" #: ../../any.pm_.c:768 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "������ ��������� ���â� ��Ȣ� ������,��� `-' `_' ��Χ� ���ġ�" #: ../../any.pm_.c:769 msgid "The user name is too long" msgstr "������ ��������� ���� ��� ������ ����" #: ../../any.pm_.c:770 msgid "This user name is already added" msgstr "������ ��������� ���� ���ɧ� ��������Ţ��" #: ../../any.pm_.c:774 msgid "Add user" msgstr "��ɨ�� ���" #: ../../any.pm_.c:775 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "���� ��¨� ����\n" "%s" #: ../../any.pm_.c:776 msgid "Accept user" msgstr "��ɨ� ���즸�����" #: ../../any.pm_.c:787 msgid "Real name" msgstr "����¡�� ����" #: ../../any.pm_.c:788 ../../printerdrake.pm_.c:864 #: ../../printerdrake.pm_.c:979 msgid "User name" msgstr "���� ����" #: ../../any.pm_.c:791 msgid "Shell" msgstr "��" #: ../../any.pm_.c:793 msgid "Icon" msgstr "������" #: ../../any.pm_.c:820 msgid "Autologin" msgstr "��ɢ��� �������" #: ../../any.pm_.c:821 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "��ɡ� ���� ������� ��ɢ��� ������� ����� �� �������.\n" "������ ����. ����� ���� ������ Ţ��Ҹ�ȣ��ǡ?" #: ../../any.pm_.c:825 msgid "Choose the default user:" msgstr "��������� ��ɨ�� ����� ������" #: ../../any.pm_.c:826 msgid "Choose the window manager to run:" msgstr "���� ��ġǨ�� ����� ������" #: ../../any.pm_.c:841 msgid "Please choose a language to use." msgstr "����� ������ Ţ���� ���Ƣ��� ����� ������" #: ../../any.pm_.c:843 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "���ʧ�� Ģ�� �� ���Ƣ�Ǣ� ����츢��\n" "����� ���� Ţ���� ���Ƣ��� ����� ����\n" "����� ���Ţ ���� �ڦ����� ����� ������ �������" #: ../../any.pm_.c:857 ../../install_steps_interactive.pm_.c:690 #: ../../standalone/drakxtv_.c:73 msgid "All" msgstr "�����" #: ../../any.pm_.c:978 msgid "Allow all users" msgstr "����� ��ɨ��� �����" #: ../../any.pm_.c:978 msgid "No sharing" msgstr "�������� ����" #: ../../any.pm_.c:988 ../../install_any.pm_.c:1199 ../../standalone.pm_.c:66 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "%s ��� ����� ������������.��Ҿ� ����?" #: ../../any.pm_.c:991 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "����� ����, NFS ��� ������ ����ġ�. ������ ����¡ɨ�� ����� ���" #: ../../any.pm_.c:999 ../../install_any.pm_.c:1204 ../../standalone.pm_.c:71 #, c-format msgid "Mandatory package %s is missing" msgstr "������� ��� ������ ����� %s ����" #: ../../any.pm_.c:1005 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "����� ���� ������� ��� ����� �Ǣ��� ������ �����\n" "Ţ��Ҹ�ȣ��ǡ? ��� ��� ������ ��������, ���Ċ ������Ȣ����� ������ ����� " "���� ���� .\n" "\n" "�ɢ���ɡ�̾� ���š� ������� �ɢ�ɢ¡� ����� �Ǣ��.\n" #: ../../any.pm_.c:1019 msgid "Launch userdrake" msgstr "ʧ����ɨ� ����" #: ../../any.pm_.c:1021 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "����� ����� \"fileshare\". \n" "��� ��Ţ�� ��ɨ� �Ǣ���� ����ġ�" #: ../../any.pm_.c:1072 msgid "Welcome To Crackers" msgstr "�������� �ո" #: ../../any.pm_.c:1073 msgid "Poor" msgstr "�������" #: ../../any.pm_.c:1074 ../../mouse.pm_.c:31 msgid "Standard" msgstr "������" #: ../../any.pm_.c:1075 msgid "High" msgstr "���š�" #: ../../any.pm_.c:1076 msgid "Higher" msgstr "��� ���š�" #: ../../any.pm_.c:1077 msgid "Paranoid" msgstr "�� ���" #: ../../any.pm_.c:1080 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "�� ����Ҹ�� ������о� ܼ��,\n" "��Ȣ�� ��и������. ����� ܼ ����¡�\n" "������� ���ʧ� ������ ������ܼ��" #: ../../any.pm_.c:1083 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "���� ��и������. ����� �����\n" "������� ���ʧ� ������ ������ܼ��" #: ../../any.pm_.c:1084 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "�â¡� ��и������. ����� �����\n" "������� ���ʧ� ������ �����ġ�" #: ../../any.pm_.c:1085 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "���� ��и������. ����� �� �����ɸ� �������" #: ../../any.pm_.c:1086 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "���� ����� ������ �� �â��Ȣ¡� ��������� ��� ��и������\n" "�� ��Ǣ¢� ���� ���ʸǢ� ���Ũ� ��� ���� ���� \n" "���� ����� �� ����� ��������� ��ȡ�, ���� ��� ̨�� ��и���Ǩ� ������ġ�" #: ../../any.pm_.c:1089 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "�� ���� ���� ����ȧ�. �� ��Ȣ�� ���� �� �����¡��" #: ../../any.pm_.c:1095 msgid "DrakSec Basic Options" msgstr "ʧ����и��� ������ Ţ������" #: ../../any.pm_.c:1096 msgid "Please choose the desired security level" msgstr "������ ����¡� ��и��� ���Ĩ�� ����� ������" #: ../../any.pm_.c:1099 msgid "Security level" msgstr "��и��� ����" #: ../../any.pm_.c:1101 msgid "Use libsafe for servers" msgstr "libsafe ��� �ĸ��è� �â��Ȣ�Ǣ� ����������" #: ../../any.pm_.c:1102 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "�� �ĸ��è� �������ž�� �� ��и��� ����ɸ�� �Ţ�� ����" #: ../../any.pm_.c:1103 msgid "Security Administrator (login or email)" msgstr "��и��� ��ġ��(���� ���� ������ Ӹ�â)" #: ../../any.pm_.c:1192 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "����� ������Ţ���� ��Ũ� Ţ����Ĩ� �� �����\n" "���� �� Ţ�� ���� Ţ�� ���������� ����� ����\n" "(�������� ���� ���� ������)" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:429 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Welcome to GRUB the operating system chooser!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:998 msgid "commands before booting, or 'c' for a command-line." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:1001 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../bootloader.pm_.c:1005 msgid "not enough room in /boot" msgstr "/boot ���Ţ� ������ �������" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1105 msgid "Desktop" msgstr "����" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1107 msgid "Start Menu" msgstr "��������" #: ../../bootloader.pm_.c:1126 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "%s �� Ÿ�� ���� ���̿�è� ���� ����ǡ�\n" #: ../../bootlook.pm_.c:46 ../../standalone/drakperm_.c:15 #: ../../standalone/draksplash_.c:26 msgid "no help implemented yet.\n" msgstr "���� ��Ţ �¡á�Ţ���.\n" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "������� ��� ��Ũ���" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:62 #: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:82 #: ../../standalone/logdrake_.c:102 msgid "/_File" msgstr "/_�����" #: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83 #: ../../standalone/logdrake_.c:108 msgid "/File/_Quit" msgstr "/�����/_��Ǣ�" #: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:63 #: ../../standalone/drakfloppy_.c:83 ../../standalone/logdrake_.c:108 msgid "<control>Q" msgstr "<control>Q" #: ../../bootlook.pm_.c:91 msgid "NewStyle Categorizing Monitor" msgstr "Ҿ�� Ũ�������� Ӹ��" #: ../../bootlook.pm_.c:92 msgid "NewStyle Monitor" msgstr "Ҿ�� Ӹ��" #: ../../bootlook.pm_.c:93 msgid "Traditional Monitor" msgstr "���� Ӹ��" #: ../../bootlook.pm_.c:94 msgid "Traditional Gtk+ Monitor" msgstr "���� Gtk+ Ӹ��" #: ../../bootlook.pm_.c:95 msgid "Launch Aurora at boot time" msgstr "��áè� ���������� ��츢Ţ�" #: ../../bootlook.pm_.c:98 msgid "Lilo/grub mode" msgstr "Ģ�ġ/��� ӨȨ�" #: ../../bootlook.pm_.c:98 msgid "Yaboot mode" msgstr "¡����� ӨȨ�" #: ../../bootlook.pm_.c:146 msgid "Install themes" msgstr "����츨� �������" #: ../../bootlook.pm_.c:147 #, fuzzy msgid "" "Display theme\n" "under console" msgstr "" "����츨� Ө����\n" "��� �������" #: ../../bootlook.pm_.c:148 msgid "Create new theme" msgstr "���� ���� ��š�� " #: ../../bootlook.pm_.c:192 #, c-format msgid "Backup %s to %s.old" msgstr "%s ����� %s.old �� ������" #: ../../bootlook.pm_.c:195 #, c-format msgid "Copy %s to %s" msgstr "%s ����� %s �� �����" #: ../../bootlook.pm_.c:200 ../../bootlook.pm_.c:230 ../../bootlook.pm_.c:232 #: ../../bootlook.pm_.c:242 ../../bootlook.pm_.c:251 ../../bootlook.pm_.c:258 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:116 #: ../../diskdrake/interactive.pm_.c:213 ../../diskdrake/interactive.pm_.c:344 #: ../../diskdrake/interactive.pm_.c:359 ../../diskdrake/interactive.pm_.c:473 #: ../../diskdrake/interactive.pm_.c:478 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:34 msgid "Error" msgstr "����" #: ../../bootlook.pm_.c:200 msgid "Lilo message not found" msgstr "Ģ�ġ ��Ũ� ��� ���Ţ���" #: ../../bootlook.pm_.c:230 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "/etc/sysconfig/bootsplash.��� ������ ��š� ���Ţ���" #: ../../bootlook.pm_.c:230 #, c-format msgid "Write %s" msgstr "%s ���" #: ../../bootlook.pm_.c:232 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "/etc/sysconfig/bootsplash ��� ������� �ؾ ���Ţ���\n" "�� ���â� ������ ��� ���Ţ���" #: ../../bootlook.pm_.c:243 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "mkinitrd -f /boot/initrd-%s.img %s ����� ��� ���Ţ���" #: ../../bootlook.pm_.c:246 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "'mkinitrd -f /boot/initrd-%s.img %s'.���̿������ ��š��" #: ../../bootlook.pm_.c:252 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "Ģ�ġ�� ����� ��� ���Ţ���\n" "\"lilo\" ��� ��Ǩ� ���š��¡� ��Ȣ� ����" #: ../../bootlook.pm_.c:256 msgid "Relaunch 'lilo'" msgstr "Ģ�ġ�� ����� ����" #: ../../bootlook.pm_.c:258 ../../standalone/draksplash_.c:165 #: ../../standalone/draksplash_.c:329 ../../standalone/draksplash_.c:456 msgid "Notice" msgstr "�Ȣ��" #: ../../bootlook.pm_.c:259 msgid "LiLo and Bootsplash themes installation successfull" msgstr "Ģ�ġ, �������� ������ ���� ���Ȣ¨���" #: ../../bootlook.pm_.c:259 msgid "Theme installation failed!" msgstr "������ ���� ���Ȣ¨��Ţ���" #: ../../bootlook.pm_.c:267 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "����� ������ %s �����̾� ��ġ�á� ������и�ȣ���\n" "����� ��¡Ţ�� ��� ��Ũ� ��� ���� ��Ǣ� ���" #: ../../bootlook.pm_.c:269 ../../standalone/drakbackup_.c:2429 #: ../../standalone/drakbackup_.c:2439 ../../standalone/drakbackup_.c:2449 #: ../../standalone/drakbackup_.c:2457 ../../standalone/drakgw_.c:554 msgid "Configure" msgstr "��Ũ�" #: ../../bootlook.pm_.c:276 msgid "Splash selection" msgstr "������� ����" #: ../../bootlook.pm_.c:279 msgid "Themes" msgstr "������" #: ../../bootlook.pm_.c:281 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" "\n" "Ģ�ġ ���� ���������\n" "����츨� ���� ���,\n" "����� �ɢ¡��� ����\n" "����ġ�" #: ../../bootlook.pm_.c:284 msgid "Lilo screen" msgstr "Ģ�ġ ����" #: ../../bootlook.pm_.c:289 msgid "Bootsplash" msgstr "�������" #: ../../bootlook.pm_.c:324 msgid "System mode" msgstr "��� ӨȨ�" #: ../../bootlook.pm_.c:326 msgid "Launch the graphical environment when your system starts" msgstr "���� ������� Ũ�Ţ���Ƣ ӨȨ���� ������" #: ../../bootlook.pm_.c:331 msgid "No, I don't want autologin" msgstr "����, ���� ��ɢ��� ������� ����" #: ../../bootlook.pm_.c:333 msgid "Yes, I want autologin with this (user, desktop)" msgstr "��, ���� ��ɢ��� ������� (����,����¨���) �����" #: ../../bootlook.pm_.c:343 ../../network/netconnect.pm_.c:97 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 #: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4193 #: ../../standalone/drakbackup_.c:4956 ../../standalone/drakconnect_.c:108 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667 #: ../../standalone/drakfont_.c:612 ../../standalone/drakfont_.c:799 #: ../../standalone/drakfont_.c:876 ../../standalone/drakfont_.c:963 #: ../../ugtk.pm_.c:289 msgid "OK" msgstr "�â" #: ../../bootlook.pm_.c:403 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "/etc/inittab ��� ������ ���� ���Ţ���: %s" #: ../../common.pm_.c:99 msgid "GB" msgstr "GB " #: ../../common.pm_.c:99 msgid "KB" msgstr "KB" #: ../../common.pm_.c:99 msgid "MB" msgstr "MB" #: ../../common.pm_.c:107 msgid "TB" msgstr "TB" #: ../../common.pm_.c:115 #, c-format msgid "%d minutes" msgstr "%d ��������" #: ../../common.pm_.c:117 msgid "1 minute" msgstr "1 ������" #: ../../common.pm_.c:119 #, c-format msgid "%d seconds" msgstr "%d Ţ��ʸ�" #: ../../common.pm_.c:164 msgid "Can't make screenshots before partitioning" msgstr "Ÿ���� ��ž�� �� ���Ƣ���� ��� ��¡�" #: ../../common.pm_.c:171 #, c-format msgid "Screenshots will be available after install in %s" msgstr "���Ţ ���� ���Ƣ���Ҹ� %s �������" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:113 msgid "France" msgstr "�����" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "������ â��" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:116 msgid "Belgium" msgstr "�������" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "��� �����" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "����ɢ" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "������" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "�����" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "�Ţ��" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:114 msgid "Netherlands" msgstr "����ġ��" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:115 ../../standalone/drakxtv_.c:68 msgid "Italy" msgstr "��Ģ" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "����â¡" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:117 msgid "United States" msgstr "���â측" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/dav.pm_.c:27 msgid "New" msgstr "Ҿ��" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "����" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:389 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "���" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "����¸�" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:383 #: ../../diskdrake/interactive.pm_.c:572 ../../diskdrake/interactive.pm_.c:599 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15 #: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "���� ��Ǣ" #: ../../diskdrake/dav.pm_.c:85 msgid "Please enter the WebDAV server URL" msgstr "����� ����¸�� URL �����" #: ../../diskdrake/dav.pm_.c:88 msgid "The URL must begin with http:// or https://" msgstr "URL ������� http:// ���� https:// ��� �����������" #: ../../diskdrake/dav.pm_.c:109 msgid "Server: " msgstr "����¸�: " #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:444 #: ../../diskdrake/interactive.pm_.c:1093 #: ../../diskdrake/interactive.pm_.c:1168 msgid "Mount point: " msgstr "���� ��Ǣ: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1174 #, c-format msgid "Options: %s" msgstr "Ţ������: %s" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "��צ��� ������ ����¡� ������ ��������즸�����" #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:938 #: ../../diskdrake/interactive.pm_.c:947 #: ../../diskdrake/interactive.pm_.c:1013 msgid "Read carefully!" msgstr "������ �����" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "�������� " #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "��¡Ţ... " #: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "���� ����� ��� " #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "���� Ţ����� Ÿ��\n" "������â¾�� ���� .\n" "��� ����� ���Ȣ¨�� ��� �Ȣ���Ч��\n" "(\"���Ȣ¨�\" ����� ��� ��Ǣ� ���)" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "Please click on a partition" msgstr "��צ��� Ÿ�� ���� ��������" #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:465 msgid "Details" msgstr "Ţ�����" #: ../../diskdrake/hd_gtk.pm_.c:252 msgid "No hard drives found" msgstr "����� ��� ������Ţ���" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2 ���������" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "FAT" msgstr "FAT ���������" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "HFS" msgstr "HFS ���������" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Journalised FS" msgstr "��Ǣ��¡� ���������" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "SunOS" msgstr "����츿���" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Swap" msgstr "������" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1109 msgid "Empty" msgstr "��������" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:325 #: ../../install_steps_gtk.pm_.c:383 ../../mouse.pm_.c:165 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1756 msgid "Other" msgstr "��Ȩ�" #: ../../diskdrake/hd_gtk.pm_.c:328 msgid "Filesystem types:" msgstr "��������� Ũ���:" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:406 msgid "Create" msgstr "��š��" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:384 #: ../../diskdrake/interactive.pm_.c:535 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "Ũ�: " #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347 #, c-format msgid "Use ``%s'' instead" msgstr "���ġ� ``%s'' � �������" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:393 msgid "Delete" msgstr "����" #: ../../diskdrake/hd_gtk.pm_.c:351 msgid "Use ``Unmount'' first" msgstr "ӾĢ� ���� ��Ǩ� �������" #: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:522 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr " %s, ��� Ÿ�� ��� Ũ��� ���Ȣ��, ��Ģ�� ���� ������ ����Ţ��" #: ../../diskdrake/interactive.pm_.c:174 msgid "Choose a partition" msgstr "Ÿ�� ���� ����� ���" #: ../../diskdrake/interactive.pm_.c:174 msgid "Choose another partition" msgstr "��� Ÿ�� ���� ����� ��� " #: ../../diskdrake/interactive.pm_.c:199 msgid "Exit" msgstr "��Ǣ�" #: ../../diskdrake/interactive.pm_.c:225 msgid "Toggle to expert mode" msgstr "�Ȣ�� ӨȨ��� ���" #: ../../diskdrake/interactive.pm_.c:225 msgid "Toggle to normal mode" msgstr "������� ӨȨ��� ���" #: ../../diskdrake/interactive.pm_.c:225 msgid "Undo" msgstr "��������" #: ../../diskdrake/interactive.pm_.c:244 msgid "Continue anyway?" msgstr "������ �����ž�?" #: ../../diskdrake/interactive.pm_.c:249 msgid "Quit without saving" msgstr "����측�� ��Ǣ�" #: ../../diskdrake/interactive.pm_.c:249 msgid "Quit without writing the partition table?" msgstr "�������� ���� ����측�� ��Ǣ�" #: ../../diskdrake/interactive.pm_.c:254 msgid "Do you want to save /etc/fstab modifications" msgstr " /etc/fstab �������� ���� ����� ������" #: ../../diskdrake/interactive.pm_.c:267 msgid "Auto allocate" msgstr "��ɢ�� ����" #: ../../diskdrake/interactive.pm_.c:267 msgid "Clear all" msgstr "������ ���Ȣ¨�" #: ../../diskdrake/interactive.pm_.c:267 #: ../../install_steps_interactive.pm_.c:214 msgid "More" msgstr "����" #: ../../diskdrake/interactive.pm_.c:271 msgid "Hard drive information" msgstr "���� ��Ȣ� ����" #: ../../diskdrake/interactive.pm_.c:302 msgid "All primary partitions are used" msgstr "����� Ÿ�� ������ �¹������ ����" #: ../../diskdrake/interactive.pm_.c:303 msgid "I can't add any more partition" msgstr "���� ��� Ÿ�� ������ ���� ��¡�" #: ../../diskdrake/interactive.pm_.c:304 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "���� Ÿ�� ������ ���� ������ɡ�, ����� Ÿ�� ���� ��츢 Ţ�� Ҿ�� ������ Ÿ�" "� ���� ��š���" #: ../../diskdrake/interactive.pm_.c:314 msgid "Save partition table" msgstr "�������� ���� �������" #: ../../diskdrake/interactive.pm_.c:315 msgid "Restore partition table" msgstr "���� Ÿ�� ����Ҹ�� ���� ������ ����� š����" #: ../../diskdrake/interactive.pm_.c:316 msgid "Rescue partition table" msgstr "���� Ÿ�� ����Ҹ�� �����" #: ../../diskdrake/interactive.pm_.c:318 msgid "Reload partition table" msgstr "���� Ÿ�� ����Ҹ�� ���� ������" #: ../../diskdrake/interactive.pm_.c:323 msgid "Removable media automounting" msgstr "���� ������ �������" #: ../../diskdrake/interactive.pm_.c:332 ../../diskdrake/interactive.pm_.c:352 msgid "Select file" msgstr "������ ����� ���" #: ../../diskdrake/interactive.pm_.c:339 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "������ ��� ���� Ÿ�� ������� ��� ��ȡ� ����\n" "�������` ����ġ��?" #: ../../diskdrake/interactive.pm_.c:353 ../../harddrake/sound.pm_.c:200 msgid "Warning" msgstr "��â쨸" #: ../../diskdrake/interactive.pm_.c:354 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "������� �������\n" "�� ���� ����� ���Ĩ��� �Ƣ��Ţ��" #: ../../diskdrake/interactive.pm_.c:365 msgid "Trying to rescue partition table" msgstr "���� Ÿ�� ����Ҹ�� ��� ��������" #: ../../diskdrake/interactive.pm_.c:371 msgid "Detailed information" msgstr "Ţâš� ����" #: ../../diskdrake/interactive.pm_.c:386 ../../diskdrake/interactive.pm_.c:666 msgid "Resize" msgstr "���Ȣ¨� " #: ../../diskdrake/interactive.pm_.c:387 ../../diskdrake/interactive.pm_.c:719 msgid "Move" msgstr "�����" #: ../../diskdrake/interactive.pm_.c:388 msgid "Format" msgstr "�����" #: ../../diskdrake/interactive.pm_.c:390 msgid "Add to RAID" msgstr "RAID ��� ���" #: ../../diskdrake/interactive.pm_.c:391 msgid "Add to LVM" msgstr "LVM ��� ���" #: ../../diskdrake/interactive.pm_.c:394 msgid "Remove from RAID" msgstr "RAID ���� ����" #: ../../diskdrake/interactive.pm_.c:395 msgid "Remove from LVM" msgstr "LVM ���� ����" #: ../../diskdrake/interactive.pm_.c:396 msgid "Modify RAID" msgstr "RAID ����" #: ../../diskdrake/interactive.pm_.c:397 msgid "Use for loopback" msgstr "��¡� �����" #: ../../diskdrake/interactive.pm_.c:437 msgid "Create a new partition" msgstr "Ÿ�� ���� ��š�� " #: ../../diskdrake/interactive.pm_.c:440 msgid "Start sector: " msgstr "���� Ţ�: " #: ../../diskdrake/interactive.pm_.c:442 ../../diskdrake/interactive.pm_.c:819 msgid "Size in MB: " msgstr "��������� ���: " #: ../../diskdrake/interactive.pm_.c:443 ../../diskdrake/interactive.pm_.c:820 msgid "Filesystem type: " msgstr "��������� Ũ�: " #: ../../diskdrake/interactive.pm_.c:448 msgid "Preference: " msgstr "Ţ������: " #: ../../diskdrake/interactive.pm_.c:473 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Ÿ�� ���� ��š� ��¡�\n" "������ ����� Ÿ�� ���ɧ� ����.\n" "�� ����� Ÿ�� ���� ��츢 Ţ�� ������ Ÿ�� ���� ��š�����" #: ../../diskdrake/interactive.pm_.c:503 msgid "Remove the loopback file?" msgstr "��¢� ������ ���š?" #: ../../diskdrake/interactive.pm_.c:533 msgid "Change partition type" msgstr "Ÿ�� Ũ��� ����: " #: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "����� �� ���������� ������ �����ȣ���?" #: ../../diskdrake/interactive.pm_.c:540 msgid "Switching from ext2 to ext3" msgstr "ext2 ¢Ģ��� ext3 ������������ ��ڸ���" #: ../../diskdrake/interactive.pm_.c:570 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "���� �� ����� %s ��� ��� Ţ��Ҹ�ȣ���?" #: ../../diskdrake/interactive.pm_.c:571 #, c-format msgid "Where do you want to mount device %s?" msgstr "���� %s �� ��� ��� Ţ��Ҹ�ȣ���?" #: ../../diskdrake/interactive.pm_.c:577 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "���ɧ� ��ɣ��� ��Ǿ�� ������Ǣ�� ������ ��¡�.\n" "ӾĢ� ��¢� ������ �������" #: ../../diskdrake/interactive.pm_.c:598 #, c-format msgid "Where do you want to mount %s?" msgstr "���� %s �� ��� ��� Ţ��Ҹ�ȣ���?" #: ../../diskdrake/interactive.pm_.c:622 msgid "Computing FAT filesystem bounds" msgstr "FAT ��������� ��� �����θ����" #: ../../diskdrake/interactive.pm_.c:622 ../../diskdrake/interactive.pm_.c:681 #: ../../install_interactive.pm_.c:133 msgid "Resizing" msgstr "���Ȣ¨����θ���" #: ../../diskdrake/interactive.pm_.c:654 msgid "This partition is not resizeable" msgstr "�� Ÿ�� ���Ȣ¨����� ��¡��" #: ../../diskdrake/interactive.pm_.c:659 msgid "All data on this partition should be backed-up" msgstr "��צ��� ������ ����¡� ������ ��������즸�����" #: ../../diskdrake/interactive.pm_.c:661 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s, ���Ȣ¨�� ���� ������ �Ƣ�� Ţ��" #: ../../diskdrake/interactive.pm_.c:666 msgid "Choose the new size" msgstr "Ҿ�� �Ǩ� ����� ������" #: ../../diskdrake/interactive.pm_.c:667 msgid "New size in MB: " msgstr "Ҿ�� �Ǩ� ���� ����� : " #: ../../diskdrake/interactive.pm_.c:720 msgid "Which disk do you want to move it to?" msgstr "����� �� ����� ���� �����ȣ���?" #: ../../diskdrake/interactive.pm_.c:721 msgid "Sector" msgstr "Ţ�" #: ../../diskdrake/interactive.pm_.c:722 msgid "Which sector do you want to move it to?" msgstr "����� �� Ţ�Ģ�� ���� �����ȣ���?" #: ../../diskdrake/interactive.pm_.c:725 msgid "Moving" msgstr "������θ���" #: ../../diskdrake/interactive.pm_.c:725 msgid "Moving partition..." msgstr "Ÿ���� ������θ��� ..." #: ../../diskdrake/interactive.pm_.c:742 msgid "Choose an existing RAID to add to" msgstr "���ɧ� ����� RAID ��� ���" #: ../../diskdrake/interactive.pm_.c:743 ../../diskdrake/interactive.pm_.c:760 msgid "new" msgstr "Ҿ��" #: ../../diskdrake/interactive.pm_.c:758 msgid "Choose an existing LVM to add to" msgstr "���ɧ� ����� LVM ��� ���" #: ../../diskdrake/interactive.pm_.c:763 msgid "LVM name?" msgstr "LVM ����" #: ../../diskdrake/interactive.pm_.c:804 msgid "This partition can't be used for loopback" msgstr "�� Ÿ�� ��¡� ������ ��¡�" #: ../../diskdrake/interactive.pm_.c:817 msgid "Loopback" msgstr "��" #: ../../diskdrake/interactive.pm_.c:818 msgid "Loopback file name: " msgstr "�� ������� ����: " #: ../../diskdrake/interactive.pm_.c:823 msgid "Give a file name" msgstr "�������� ���� �������" #: ../../diskdrake/interactive.pm_.c:826 msgid "File already used by another loopback, choose another one" msgstr "�� ���� �������� ����, ��� ���� �������" #: ../../diskdrake/interactive.pm_.c:827 msgid "File already exists. Use it?" msgstr "�� ����� ���ɧ� ����. ������� �����ġ��?" #: ../../diskdrake/interactive.pm_.c:850 msgid "Mount options" msgstr "��� Ţ������" #: ../../diskdrake/interactive.pm_.c:857 msgid "Various" msgstr "���" #: ../../diskdrake/interactive.pm_.c:921 ../../standalone/drakfloppy_.c:104 msgid "device" msgstr "�����" #: ../../diskdrake/interactive.pm_.c:922 msgid "level" msgstr "����" #: ../../diskdrake/interactive.pm_.c:923 msgid "chunk size" msgstr "���" #: ../../diskdrake/interactive.pm_.c:938 msgid "Be careful: this operation is dangerous." msgstr "�� ���� ���¸�����. ������ �����" #: ../../diskdrake/interactive.pm_.c:953 msgid "What type of partitioning?" msgstr "�� Ũ� Ÿ��?" #: ../../diskdrake/interactive.pm_.c:969 #, c-format msgid "The package %s is needed. Install it?" msgstr "%s ��� ����� ������������. ��Ҿ� ����?" #: ../../diskdrake/interactive.pm_.c:983 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "��ɢ���, /boot 1024 �ը��� ��� ��š� ����.\n" "����� Ģ�ġ ������ɡ� �� �Ũ� ���¡�. ���� ����� Ģ�ġ ������Ţ�� /" "boot ������ ����¢���" #: ../../diskdrake/interactive.pm_.c:987 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "root (/) Ÿ�� 1024 �ը��� ��� ��š츢 �����.\n" "����� Ģ�ġ ������ɡ� �� �Ũ� ����. /boot ����. ��ɡ� /boot ��š���" #: ../../diskdrake/interactive.pm_.c:993 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "���� root (/) Ÿ�� RAID Ũ�¢� ����.����� Ģ�ġ ������ɡ� �� �Ũ� ����. /" "boot ����. ��ɡ� /boot ��š���" #: ../../diskdrake/interactive.pm_.c:1013 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s ���� Ÿ�� ����� ���� �ؾ�������" #: ../../diskdrake/interactive.pm_.c:1017 msgid "You'll need to reboot before the modification can take place" msgstr "����� ���� ������� �Ũ� ���� �� ������ ����" #: ../../diskdrake/interactive.pm_.c:1028 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "��צ��� ������ ����¡� ������ ��������즸����� %s ������ ���� ����� Ţ" "�������� ���� Ţ�ţ���" #: ../../diskdrake/interactive.pm_.c:1030 msgid "Formatting" msgstr "������θ���" #: ../../diskdrake/interactive.pm_.c:1031 #, c-format msgid "Formatting loopback file %s" msgstr "%s �� ����� ������θ���" #: ../../diskdrake/interactive.pm_.c:1032 #: ../../install_steps_interactive.pm_.c:459 #, c-format msgid "Formatting partition %s" msgstr "%s Ÿ�� ������θ���" #: ../../diskdrake/interactive.pm_.c:1043 msgid "Hide files" msgstr "����Ҹ�� ������" #: ../../diskdrake/interactive.pm_.c:1043 msgid "Move files to the new partition" msgstr "����Ҹ�� ��� Ÿ�� ����� ������" #: ../../diskdrake/interactive.pm_.c:1044 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "%s\n" "%s" #: ../../diskdrake/interactive.pm_.c:1055 msgid "Moving files to the new partition" msgstr "����Ҹ�� ��� Ÿ�� ����� ������θ��� " #: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "Copying %s" msgstr "%s �������θ���" #: ../../diskdrake/interactive.pm_.c:1063 #, c-format msgid "Removing %s" msgstr "%s �����θ���" #: ../../diskdrake/interactive.pm_.c:1073 #, c-format msgid "partition %s is now known as %s" msgstr "%s Ÿ�� ������ %s �� ������θ���" #: ../../diskdrake/interactive.pm_.c:1094 #: ../../diskdrake/interactive.pm_.c:1153 msgid "Device: " msgstr "�����: " #: ../../diskdrake/interactive.pm_.c:1095 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr ": %s ��� ��츢 ��\n" #: ../../diskdrake/interactive.pm_.c:1099 #: ../../diskdrake/interactive.pm_.c:1107 #: ../../diskdrake/interactive.pm_.c:1172 msgid "Type: " msgstr "Ũ�: " #: ../../diskdrake/interactive.pm_.c:1103 msgid "Name: " msgstr "�����¢�����: " #: ../../diskdrake/interactive.pm_.c:1111 #, c-format msgid "Start: sector %s\n" msgstr "����Ţ� %s\n" #: ../../diskdrake/interactive.pm_.c:1112 #, c-format msgid "Size: %s" msgstr "���: %s" #: ../../diskdrake/interactive.pm_.c:1114 #, c-format msgid ", %s sectors" msgstr ", %s Ţ�" #: ../../diskdrake/interactive.pm_.c:1116 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d Ӿ� %d Ũ� ��� �ըǸ�\n" #: ../../diskdrake/interactive.pm_.c:1117 msgid "Formatted\n" msgstr "��������\n" #: ../../diskdrake/interactive.pm_.c:1118 msgid "Not formatted\n" msgstr "�������Ţ���\n" #: ../../diskdrake/interactive.pm_.c:1119 msgid "Mounted\n" msgstr "����������\n" #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1122 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "�� �����:\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1123 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "���������¡� �������� Ÿ��\n" ".\n" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Level %s\n" msgstr "���� %s\n" #: ../../diskdrake/interactive.pm_.c:1126 #, c-format msgid "Chunk size %s\n" msgstr "���� ���%s\n" #: ../../diskdrake/interactive.pm_.c:1127 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-��ʸ� %s\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "Loopback file name: %s" msgstr "�� ������� ����: %s" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "�� Ÿ��\n" "�츢�����\n" "��� ���� ���¡�����\n" #: ../../diskdrake/interactive.pm_.c:1135 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "�� Ÿ�� ����\n" "����� ���� ��� ������� ����\n" "����\n" #: ../../diskdrake/interactive.pm_.c:1154 msgid "Read-only" msgstr "������� ����" #: ../../diskdrake/interactive.pm_.c:1155 #, c-format msgid "Size: %s\n" msgstr "���: %s\n" #: ../../diskdrake/interactive.pm_.c:1156 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "�������: %s �ըǸ�, %s ��ĸ�, %s Ţ���\n" #: ../../diskdrake/interactive.pm_.c:1157 msgid "Info: " msgstr "����: " #: ../../diskdrake/interactive.pm_.c:1158 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-��θ�%s\n" #: ../../diskdrake/interactive.pm_.c:1159 #, c-format msgid "Partition table type: %s\n" msgstr "Ÿ�� ������� Ũ�: %s\n" #: ../../diskdrake/interactive.pm_.c:1160 #, c-format msgid "on channel %d id %d\n" msgstr "%d ���� %d ����\n" #: ../../diskdrake/interactive.pm_.c:1190 msgid "Filesystem encryption key" msgstr "��������� �����Ȣ£��� ��Ţ" #: ../../diskdrake/interactive.pm_.c:1191 msgid "Choose your filesystem encryption key" msgstr "���� ����������� �����Ȣ£��� ��Ţ�� ����� ���" #: ../../diskdrake/interactive.pm_.c:1194 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "�� �����Ȣ£��� ��Ţ ��� �Ǣ��� ���� %d ��� ��츧����" #: ../../diskdrake/interactive.pm_.c:1195 msgid "The encryption keys do not match" msgstr "�����Ȣ£��� ��Ţ�� ����� ��ȡ� ����" #: ../../diskdrake/interactive.pm_.c:1198 msgid "Encryption key" msgstr "�����Ȣ£��� ��Ţ" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Encryption key (again)" msgstr "�����Ȣ£��� ��Ţ(�����)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "Ũ��� ����" #: ../../diskdrake/removable_gtk.pm_.c:28 msgid "Please click on a medium" msgstr "���� ����� ���" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "�������� %s ������ ���Ţ���(��ȡ� �����?)" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "Ţ��� ���â�� �����" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "���ȡ��" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "�� ��������" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "��צ��� ���� ��������, �����, Ţ���� �������� ����" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3529 msgid "Username" msgstr "��������" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "Ţ����" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "����¸� ���" #: ../../fs.pm_.c:545 ../../fs.pm_.c:555 ../../fs.pm_.c:559 ../../fs.pm_.c:563 #: ../../fs.pm_.c:567 ../../fs.pm_.c:571 #, c-format msgid "%s formatting of %s failed" msgstr "%s ���� %s ������� ���Ţ���" #: ../../fs.pm_.c:608 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s �� %s Ũ�¢� ������� ���� �� ���� ��â¡�" #: ../../fs.pm_.c:682 ../../fs.pm_.c:725 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "%s Ÿ�� %s ���Ţ� ���ž�� ���� ��������" #: ../../fs.pm_.c:740 ../../partition_table.pm_.c:598 #, c-format msgid "error unmounting %s: %s" msgstr "����ž�� ���� �������� %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "�Ǣ�" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "/usr ���" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "�â��Ȣ" #: ../../fsedit.pm_.c:240 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "���� Ÿ�� ����� %s ������� ����.\n" "%s ��� ���� ��������\n" "\n" "���� �� ���� ��� ����� Ţ�������� ��� ������?\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS Ũ��� 16���� ������ ̨�š� Ÿ��Ȣ� ������ ��¡�" #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS Ũ��� 32���� ������ ̨�š� Ÿ��Ȣ� ������ ��¡�" #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "���� ��Ǣ�� / ��� ���� ��� ������ �����" #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr " %s ��� ���� ��ǢԼ� ���ɧ� Ÿ�� ��� ����\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "%s ��� ���� ��Ǣ�� LVM Ÿ�� ���¡� ��� ��¡�" #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "�� ���� �� ����������� ��� �����" #: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "����� ���� ��� (ext2/ext3, reiserfs, xfs, or jfs) ����� ��������� ����\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "�����Ȣ£� ������� Ÿ�� %s ������ ������ ��¡�" #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "������ �������" #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "���� ����ž������" #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr " %s ��� ���� ���Ţ���,%s ��� ���ž���� ���� �����" #: ../../harddrake/sound.pm_.c:168 msgid "No alternative driver" msgstr "���� ��츿��� �������" #: ../../harddrake/sound.pm_.c:169 #, fuzzy, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "���� �Ģ���� (%s) ���� ��츿��� �������" #: ../../harddrake/sound.pm_.c:171 msgid "Sound configuration" msgstr "�Ģ ��Ũ���" #: ../../harddrake/sound.pm_.c:172 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "���� �Ģ���� (%s) ���� ��츿�è� ��� ���� ����ġ�" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm_.c:176 msgid "Driver:" msgstr "��츿���:" #: ../../harddrake/sound.pm_.c:181 ../../standalone/drakTermServ_.c:246 #: ../../standalone/drakbackup_.c:3932 ../../standalone/drakbackup_.c:3965 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4018 #: ../../standalone/drakbackup_.c:4045 ../../standalone/drakbackup_.c:4084 #: ../../standalone/drakbackup_.c:4105 ../../standalone/drakbackup_.c:4132 #: ../../standalone/drakbackup_.c:4162 ../../standalone/drakbackup_.c:4188 #: ../../standalone/drakbackup_.c:4213 ../../standalone/drakfont_.c:700 msgid "Help" msgstr "��Ţ" #: ../../harddrake/sound.pm_.c:183 msgid "Switching between ALSA and OSS help" msgstr "" #: ../../harddrake/sound.pm_.c:184 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm_.c:200 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm_.c:203 ../../standalone/drakconnect_.c:301 msgid "Please Wait... Applying the configuration" msgstr "��צ��� �������...���������θ���" #: ../../harddrake/sound.pm_.c:203 ../../harddrake/ui.pm_.c:111 #: ../../interactive.pm_.c:391 msgid "Please wait" msgstr "��צ��� �������.." #: ../../harddrake/sound.pm_.c:208 msgid "No known driver" msgstr "��츿��� �������" #: ../../harddrake/sound.pm_.c:209 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "���� �Ģ���� (%s) ��츿��� �������" #: ../../harddrake/sound.pm_.c:212 msgid "Unkown driver" msgstr "��â¡� ��� ����" #: ../../harddrake/sound.pm_.c:213 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "<install at mandrakesoft dot com>\n" "with subject: unlisted sound driver \"%s\"" msgstr "" #: ../../harddrake/ui.pm_.c:16 msgid "Model" msgstr "Ũ�" #: ../../harddrake/ui.pm_.c:16 msgid "hard disk model" msgstr "������ Ũ�" #: ../../harddrake/ui.pm_.c:17 msgid "Channel" msgstr "���" #: ../../harddrake/ui.pm_.c:17 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI ���" #: ../../harddrake/ui.pm_.c:19 msgid "Bus" msgstr "���" #: ../../harddrake/ui.pm_.c:20 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "�� ���¢� ��� ���� ����θ���(���: PCI, USB, ...)" #: ../../harddrake/ui.pm_.c:21 msgid "Module" msgstr "��" #: ../../harddrake/ui.pm_.c:21 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "��츢 ���Ģ� �� ��" #: ../../harddrake/ui.pm_.c:22 msgid "Media class" msgstr "��� Ũ�" #: ../../harddrake/ui.pm_.c:22 msgid "class of hardware device" msgstr "������Ǣ� Ũ�" #: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1562 msgid "Description" msgstr "�Ȣ��" #: ../../harddrake/ui.pm_.c:23 msgid "this field describe the device" msgstr "������� Ũ��� ��Ȣ� ����" #: ../../harddrake/ui.pm_.c:25 msgid "Bus identification" msgstr " ��� ���¡��" #: ../../harddrake/ui.pm_.c:26 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "PCI/USB ������� " #: ../../harddrake/ui.pm_.c:28 msgid "Location on the bus" msgstr "���¢� ���" #: ../../harddrake/ui.pm_.c:29 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "- pci ������� - eide ������� - scsi ������� " #: ../../harddrake/ui.pm_.c:32 msgid "Old device file" msgstr "���� ����째���" #: ../../harddrake/ui.pm_.c:33 msgid "old static device name used in dev package" msgstr "���� ������ ���� ����������¢� ���������" #: ../../harddrake/ui.pm_.c:34 msgid "New devfs device" msgstr "Ҿ�� devfs �����" #: ../../harddrake/ui.pm_.c:35 msgid "new dinamic device name generated by incore kernel devfs" msgstr "" #: ../../harddrake/ui.pm_.c:36 msgid "Number of buttons" msgstr "������Ǣ� ��쨸" #: ../../harddrake/ui.pm_.c:37 msgid "the vendor name of the device" msgstr "������Ǣ� Ţ���� ����" #: ../../harddrake/ui.pm_.c:38 msgid "Alternative drivers" msgstr "" #: ../../harddrake/ui.pm_.c:39 msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../harddrake/ui.pm_.c:63 msgid "/_Quit" msgstr "/_��Ǣ�" #: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65 #: ../../harddrake/ui.pm_.c:71 ../../harddrake/ui.pm_.c:73 #: ../../standalone/logdrake_.c:111 msgid "/_Help" msgstr "/_��Ţ" #: ../../harddrake/ui.pm_.c:65 msgid "/_Help..." msgstr "/_��Ţ..." #: ../../harddrake/ui.pm_.c:66 msgid "Harddrake help" msgstr "ʧ��������� ��Ţ" #: ../../harddrake/ui.pm_.c:67 msgid "" "Description of the fields:\n" "\n" msgstr "" "����Ǣ� Ţ���\n" "\n" #: ../../harddrake/ui.pm_.c:71 msgid "/_Report Bug" msgstr "/_���Ƹ�� �ȢŢ�" #: ../../harddrake/ui.pm_.c:73 msgid "/_About..." msgstr "/_��Ȣ" #: ../../harddrake/ui.pm_.c:74 msgid "About Harddrake" msgstr "ʧ��������� ��Ȣ" #: ../../harddrake/ui.pm_.c:75 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" "�� ʧ���������, ���ʧ�� ������� ��Ũ����� ��Ţ\n" "��Ǣ£�" #: ../../harddrake/ui.pm_.c:76 msgid "Author:" msgstr "���â��" #: ../../harddrake/ui.pm_.c:86 msgid "Harddrake2 version " msgstr "ʧ���������2 ��Ǣ£�" #: ../../harddrake/ui.pm_.c:101 msgid "Detected hardware" msgstr "������� �������Ǣ� Ţ������� ������" #: ../../harddrake/ui.pm_.c:103 msgid "Information" msgstr "����" #: ../../harddrake/ui.pm_.c:106 msgid "Configure module" msgstr "���� ��Ũ�����" #: ../../harddrake/ui.pm_.c:107 msgid "Run config tool" msgstr "��Ũ���� ��Ţ�� ����" #: ../../harddrake/ui.pm_.c:111 msgid "Detection in progress" msgstr "���� ��ξ� �����ڸ���" #: ../../harddrake/ui.pm_.c:148 msgid "You can configure each parameter of the module here." msgstr "���� ����� ���� ��Ũ��ġ�" #: ../../harddrake/ui.pm_.c:166 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" ...�����ڸ���" #: ../../harddrake/ui.pm_.c:180 #, c-format msgid "Probing %s class\n" msgstr "" #: ../../harddrake/ui.pm_.c:201 msgid "primary" msgstr "����츿���" #: ../../harddrake/ui.pm_.c:201 msgid "secondary" msgstr "�������" #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 msgid "Auto-detect" msgstr "��ɢ��-��������" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:185 msgid "Unknown|Generic" msgstr "����Ţ� ����¸�" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:209 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:212 msgid "Card model:" msgstr "" #: ../../harddrake/v4l.pm_.c:213 msgid "Tuner type:" msgstr "" #: ../../harddrake/v4l.pm_.c:214 msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm_.c:214 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:216 msgid "PLL setting:" msgstr "PLL �������" #: ../../harddrake/v4l.pm_.c:217 msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm_.c:217 msgid "enable radio support" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.GNU/Linux is a multiuser system, and this " "means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.Listed above are the existing Linux partitions " "detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.The Mandrake Linux installation is spread out " "over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required" #: ../../help.pm_.c:84 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.It is now time to specify which programs you " "wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.Finally, depending on whether or not you " "selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." #: ../../help.pm_.c:171 msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.You are now proposed to set up your Internet/" "network connection. If you\n" "wish to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``User Guide'' chapter about Internet connections for\n" "details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.You may now choose which services you wish to " "start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.GNU/Linux manages time in GMT (Greenwich Mean " "Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." #: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.X (for X Window System) is the heart of the " "GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible, depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.Finally, you will be asked whether you want to " "see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." #: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" "��Ţ ����� ���Ƣ��������Ţ��� .The Mandrake Linux CD-ROM has a built-in " "rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" "of your main disk (unless you are using another boot manager), to allow you\n" "to start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." #: ../../help.pm_.c:277 msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.At this point, you need to choose where you " "want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space, you will\n" "need to partition it. Basically, partitioning a hard drive consists of\n" "logically dividing it to create space to install your new Mandrake Linux\n" "system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" "From the installation interface, you can use the wizards as described here\n" "by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option;\n" "\n" " * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" "is installed on your hard drive and takes all the space available on it,\n" "you have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.There you are. Installation is now complete " "and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.Any partitions that have been newly defined " "must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "���� Ҿ�� ���ʧ�� Ģ�� ��� ���� ������θ���..\n" "����� ���� ������ ������Ǣ� ��쨸�� �����\n" "���� �����¢� �Ÿ� ����� ��� �������Ǣ� ����\n" "��� ���� ����� �����ġ� .\n" "\n" "��צ��� �������.." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" "���� ���ʧ�� Ģ�� ��� ���� ��Ǣ£����� \n" "����� ������� ���¢� ����� Ҿ�� ������� ��Ǣ���\n" "���ġ�. ��� ���� �����¢� ���������� ������Ǣ�\n" "��и��� ̨���θ����, ���Ƹ���� ��� ��� �������ġ�\n" "��� ������ ��� ���� ���� �����. ������ �����м� \n" "����� ���� ����� ����� ��츢 ����ġ�. ����� ����ħ���\n" "��� ������� ���� ��� ���� ��ġ�\n" "�������� ���� \"��\" ����, ���� Ţ���� ���Ħ��ȡ� \"����\" \n" "���� ���� ������.\n" "\n" "�������� ���� \"��\" �� ���� ������ ������ �� ���¾���Ǣ�\n" "Ӹ�â �������. ������ �ո�� ��� ���Ģ��� ��� ����\n" "���� ������. ��� \"����\" ��ȡ� ������� ��������. ���Ħ��ȡ�\n" "\"����\" ��� ����Ģ ��Ǣ�����" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Before continuing, you should read carefully " "the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.At this point, it is time to choose the " "security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option" #: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.At this point, you need to choose which " "partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy.\n" "Useful for later partition-table recovery if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you\n" "can try to recover it using this option. Please be careful and remember\n" "that it can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your\n" "initial partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.More than one Microsoft partition has been " "detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "��צ��� �������..�� ����쨸 ��� �������� ���" #: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" " * \"Install\": completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps the\n" "current partitions of your hard drives as well as user configurations. All\n" "other configuration steps remain available with respect to plain\n" "installation;\n" "\n" " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configurations\n" "unchanged. Adding new packages to the current installation is also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly-customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" "choose this unless you know what you are doing.��Ţ ����� ���Ƣ��������Ţ���." #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you won't even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.��Ţ ����� ���Ƣ��������Ţ���." #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.��Ţ ����� ���Ƣ" "��������Ţ���. " #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.��Ţ ����� ���Ƣ��������Ţ���." #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���.Please select the correct port. For example, " "the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux.. " #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. This is the most crucial decision point for " "the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. .ILO and grub are GNU/Linux bootloaders. This " "stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose - in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. LILO (the LInux LOader) and grub are " "bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. You must indicate where you wish to place the " "information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Here, we select a printing system for your " "computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." #: ../../help.pm_.c:759 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. DrakX now detects any IDE device present in " "your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from Microsoft Windows (if you used this hardware with\n" "Windows on your system)." #: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. You can add additional entries for yaboot, " "either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." #: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Yaboot is a bootloader for NewWorld MacIntosh " "hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." #: ../../help.pm_.c:860 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Here are presented various parameters " "concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated with it." #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Choose the hard drive you want to erase in " "order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "��Ţ ����� ���Ƣ��������Ţ���. Click on \"OK\" if you want to delete all " "data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "���� ��Ţ�� ���¡� �ڸ�� ������Ţ��� (%s ������ ���Ţ���), ���� ���� ����� " "��ȡ� ���� ������и�ȣ��� (��צ��� Ҿ�� ���� ��š�����)" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "����� %s ������ ���� �����" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "����� ������� �â���� ������� ���� ���� ��ǣ���: %s\n" "\n" "\n" "�� �â��Ȣ�� ���������¡� �������. ���Ȣ� ���: \n" "��Ǣ¢�� ����� ��и��� ����� �������. �ɡ� ���ɡǢ�:\n" "����������ġ�.\n" "������ ����측� ����� �������� ������\n" "\n" "\n" "����� ����� ����� ���� Ţ��Ҹ�ȣ��ǡ?\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "NIS ���� ���� ��¡�" #: ../../install_any.pm_.c:870 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "FAT ����������� ������� ������� %s ¢� ���� ������" #: ../../install_any.pm_.c:874 msgid "This floppy is not FAT formatted" msgstr "FAT ����������� �������Ţ���" #: ../../install_any.pm_.c:886 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "����� ������ ���Ţ� ������ ���ټ� ��� ������Ǣ� ����, ����� ������� ���� " "``linux defcfg=floppy'' �� ��ǣ� ������" #: ../../install_any.pm_.c:909 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "%s ��� ������ ������� ���� ��������" #: ../../install_any.pm_.c:1031 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "���� �������� -���� �����ը�� ��������" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "���� �����¢� ��� ��� �������Ǣ� ��� ��è�\n" "����� %s ������� ���ġ�" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "���Ǣ�� ����� �� �� Ÿ�� ��� �����" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "���Ǣ�� ����� �� ������ Ÿ�� ��� �����" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "���Ǣ�� ������ Ÿ�� ����.\n" "\n" "���ʧ� �����ġ��?" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "FAT ������� Ÿ�� /boot/efi ��� ���� ������ �����" #: ../../install_interactive.pm_.c:92 msgid "Use free space" msgstr "��Ģ¡� ��� ��� �������" #: ../../install_interactive.pm_.c:94 msgid "Not enough free space to allocate new partitions" msgstr "������� ��Ģ¢�� ����" #: ../../install_interactive.pm_.c:102 msgid "Use existing partitions" msgstr "����� Ÿ����� ����������" #: ../../install_interactive.pm_.c:104 msgid "There is no existing partition to use" msgstr "������ Ÿ����� �������" #: ../../install_interactive.pm_.c:111 msgid "Use the Windows partition for loopback" msgstr "" #: ../../install_interactive.pm_.c:114 msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: ../../install_interactive.pm_.c:116 msgid "Choose the sizes" msgstr "�Ǩ� ����� ������" #: ../../install_interactive.pm_.c:117 msgid "Root partition size in MB: " msgstr "���� ����� �� Ÿ�� ��� : " #: ../../install_interactive.pm_.c:118 msgid "Swap partition size in MB: " msgstr "���� ����� ������ Ÿ�� ��� : " #: ../../install_interactive.pm_.c:128 msgid "Use the free space on the Windows partition" msgstr "Ţ����� Ÿ��Ȣ� ��� ��Ģ¢�� �������" #: ../../install_interactive.pm_.c:131 msgid "Which partition do you want to resize?" msgstr "����� �� Ÿ��Ȣ� �Ǩ� ���Ȣ¨�� �����ȣ���?" #: ../../install_interactive.pm_.c:133 msgid "Resizing Windows partition" msgstr "Ţ����� Ÿ��Ȣ� ��� ���Ȣ¨����θ���" #: ../../install_interactive.pm_.c:136 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Ţ����� Ÿ��Ȣ� ��� ���Ȣ¨������� , \n" "�� ���� �������� ��ɢ��� %s" #: ../../install_interactive.pm_.c:139 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Ţ����� Ÿ�� ����� ����������. ��צ��� ����� ������� Ţ������� ������� " "``defrag'' ��� ��Ţ�� �����. ����� ����� ��� ��� ���ʧ�� ���Ũ�� �������" #: ../../install_interactive.pm_.c:140 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "��â쨸!\n" "\n" "ʧ��X ������ Ţ����� Ÿ��Ȣ� �Ǩ� ���Ȣ¨��� �������:\n" "�� ����� �����. ����� ����� Ţ������� scandisk ��è� \n" "��츢¢�� ����� \n" "���� ������ ����¡� ������� ���� ����� �������\n" "���¨���� �â¡� ���� �â �� ����� ������" #: ../../install_interactive.pm_.c:150 msgid "Which size do you want to keep for Windows on" msgstr "Ţ����� ��� ����� ��â��� ��� ����� �� " #: ../../install_interactive.pm_.c:151 #, c-format msgid "partition %s" msgstr "Ÿ��Ȣ� %s" #: ../../install_interactive.pm_.c:158 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT ��� ���Ȣ¨����ž�� ���� ��������: %s" #: ../../install_interactive.pm_.c:173 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "�Ǩ� ����ž�� ���� ��¡� FAT Ÿ�� �������, " #: ../../install_interactive.pm_.c:179 msgid "Erase entire disk" msgstr "�� ���� �Ƣ�� Ţ�" #: ../../install_interactive.pm_.c:179 msgid "Remove Windows(TM)" msgstr "Ţ������ ��츢 Ţ�" #: ../../install_interactive.pm_.c:182 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "���Ǣ�� ����� ������ �� ��� ����, ���� Ģ�쨅 ���� �����?" #: ../../install_interactive.pm_.c:185 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr " %s ���� ��� ����� Ÿ��� ���� ��� ����� ������� �Ƣ�����Ţ��" #: ../../install_interactive.pm_.c:193 msgid "Custom disk partitioning" msgstr "Ÿ����� �ɢ���ɡ��" #: ../../install_interactive.pm_.c:197 msgid "Use fdisk" msgstr "fdisk-� �������" #: ../../install_interactive.pm_.c:200 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "������ ����� �� %s �� Ÿ���� �����.\n" "���� , `w' ��ƾ� ��� �������� ���� Ţ����" #: ../../install_interactive.pm_.c:229 msgid "You don't have enough free space on your Windows partition" msgstr "Ţ����� Ÿ��Ȣ� ������ �������" #: ../../install_interactive.pm_.c:245 msgid "I can't find any room for installing" msgstr "����ž�� Ÿ��Ȣ� ������ �������" #: ../../install_interactive.pm_.c:248 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "ʧ��X ��¡Ţ ������ �� ������� ����츢��" #: ../../install_interactive.pm_.c:252 #, c-format msgid "Partitioning failed: %s" msgstr "Ÿ���Ģ� ���� ��������: %s" #: ../../install_interactive.pm_.c:262 msgid "Bringing up the network" msgstr "Ũ�¨�������� �����θ���" #: ../../install_interactive.pm_.c:267 msgid "Bringing down the network" msgstr "Ũ�¨�������� Ӽ���θ���" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "���� �������� ��ɢ��� ���� ��� ���Ŧ��� ��â�Ţ���\n" "������� ����� ���� ������" #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "���� ��Ǣ %s ���ɧ� ����" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "��� �츢� ������� ����ž�� ���� ��������\n" "���� ��� ���� ��� ��츢 �ؾ���� ���ġ�.\n" "���� ��ʨ�� ������ ���ɧ� ���̸��� �����¢� \"rpm -qpl Mandrake/RPMS/*.rpm " "�� ���¢���\"\n" #: ../../install_steps.pm_.c:452 #, c-format msgid "Welcome to %s" msgstr "%s �� ����� " #: ../../install_steps.pm_.c:542 ../../install_steps.pm_.c:781 msgid "No floppy drive available" msgstr "����� ��� ��� ����" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "������ �� `%s ������ ������ȡ�' \n" #: ../../install_steps_gtk.pm_.c:150 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "���� �����¢� ����� ̨�š� ��Ǿ��\n" "���ʧ�� Ģ�� ����ž�� ���� ����ġ�. ����� ����Ƣ ����ġ�,\n" "���¢� ���� ������� ���� `F1' �� ��� Ţ��, `text'. �� �����" #: ../../install_steps_gtk.pm_.c:161 ../../install_steps_interactive.pm_.c:231 msgid "Install Class" msgstr "���� Ũ�" #: ../../install_steps_gtk.pm_.c:164 msgid "Please choose one of the following classes of installation:" msgstr "��צ��� ����� �� ���� Ũ��� ����� ���� " #: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:676 msgid "Package Group Selection" msgstr "������� ��� ����" #: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:691 msgid "Individual package selection" msgstr "�ɢ�ɢ �����¡� ����� ���" #: ../../install_steps_gtk.pm_.c:293 ../../install_steps_interactive.pm_.c:614 #, c-format msgid "Total size: %d / %d MB" msgstr "���� ����� ���� ��� %d / %d" #: ../../install_steps_gtk.pm_.c:335 msgid "Bad package" msgstr "��ȡ� �����" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Name: %s\n" msgstr "����: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Version: %s\n" msgstr "��Ǣ£�: %s\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Size: %d KB\n" msgstr "���ġ ����� ��� %d \n" #: ../../install_steps_gtk.pm_.c:339 #, c-format msgid "Importance: %s\n" msgstr "�츢�����: %s\n" #: ../../install_steps_gtk.pm_.c:361 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "������� ������ ����� �� �������� ��`��� ���� ��¡�" #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be installed" msgstr "������� ������� ����ž�� ����� �����������" #: ../../install_steps_gtk.pm_.c:367 msgid "The following packages are going to be removed" msgstr "������� ������� �����θ���" #: ../../install_steps_gtk.pm_.c:379 msgid "You can't select/unselect this package" msgstr "����� �� ������� ����/��� ��¡�" #: ../../install_steps_gtk.pm_.c:391 msgid "This is a mandatory package, it can't be unselected" msgstr "�� ��� �����. ���� ��� ��¡�" #: ../../install_steps_gtk.pm_.c:393 msgid "You can't unselect this package. It is already installed" msgstr "�� �������.��� ��¡�. �� ���ɧ� ����������" #: ../../install_steps_gtk.pm_.c:396 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "�� ����� ������������.��Ҿ� ����?.\n" "��� ��� ������?" #: ../../install_steps_gtk.pm_.c:399 msgid "You can't unselect this package. It must be upgraded" msgstr "�� �������.��� ��¡�. �� ������������ ����� �����" #: ../../install_steps_gtk.pm_.c:404 msgid "Show automatically selected packages" msgstr "��ɡ� ����� ���������� ��������� ����" #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #: ../../standalone/drakbackup_.c:4259 msgid "Install" msgstr "����" #: ../../install_steps_gtk.pm_.c:408 msgid "Load/Save on floppy" msgstr "��������� �������" #: ../../install_steps_gtk.pm_.c:409 msgid "Updating package selection" msgstr "������� ����� ��������� ����" #: ../../install_steps_gtk.pm_.c:414 msgid "Minimal install" msgstr "̨���� �����" #: ../../install_steps_gtk.pm_.c:429 ../../install_steps_interactive.pm_.c:522 msgid "Choose the packages you want to install" msgstr "���� ����� �������� ����� ������� " #: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:760 msgid "Installing" msgstr "������θ���" #: ../../install_steps_gtk.pm_.c:451 msgid "Estimating" msgstr "��츢���θ���" #: ../../install_steps_gtk.pm_.c:458 msgid "Time remaining " msgstr "�������� ����" #: ../../install_steps_gtk.pm_.c:470 msgid "Please wait, preparing installation..." msgstr "��צ��� �������..���� ��������������" #: ../../install_steps_gtk.pm_.c:554 #, c-format msgid "%d packages" msgstr "%d �������" #: ../../install_steps_gtk.pm_.c:559 #, c-format msgid "Installing package %s" msgstr "%s ����� ������θ���" #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:784 #: ../../standalone/drakautoinst_.c:202 msgid "Accept" msgstr "���� ���������" #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:784 msgid "Refuse" msgstr "���즸���Ţ���" #: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:785 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "��ʨ� ������\n" "\n" "��צ��� \"%s\" �� ���â���� ����� ��ʨ� ���á��� �����. ���� �â ��� " "���� ��Ǣ� ������\n" "�� ��� ���Ħ��ȡ� ���� ��� ���� ��Ǣ� ������ �� ���¢Ģ��� ����� ����Ţ" "��" #: ../../install_steps_gtk.pm_.c:611 ../../install_steps_gtk.pm_.c:615 #: ../../install_steps_interactive.pm_.c:797 #: ../../install_steps_interactive.pm_.c:801 msgid "Go on anyway?" msgstr "������� ����ġ��?" #: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:797 msgid "There was an error ordering packages:" msgstr "�������� ����ž�� ���� ��������" #: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:801 msgid "There was an error installing packages:" msgstr "�������� ����ž�� ���� ��������" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "��â쨸\n" "\n" "������ Ţ������ ������ �����. ���� ������\n" "������ ���Ħ��ȡ� ���� ���\n" "��ʨ� ���� ܼ��\n" "\n" "\n" "���� ��� ���¢� ��� ������ GPL �â����� ����\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "���� �������� ��ɢ���" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "����� ����� ����� Ţ�� ��Ǣ��� Ţ��Ҹ�ȣ��ǡ?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "����� �����" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "����� ����� -��â���� ���즸���ġ�Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:191 msgid "Are you sure you refuse the licence?" msgstr "����� ����� ����� ����� ���즸���Ţ���¡?" #: ../../install_steps_interactive.pm_.c:211 #: ../../install_steps_interactive.pm_.c:1021 #: ../../standalone/keyboarddrake_.c:31 msgid "Keyboard" msgstr "Ţ����Ĩ�" #: ../../install_steps_interactive.pm_.c:212 msgid "Please choose your keyboard layout." msgstr "��צ��� ���� Ţ����Ĩ� �� ������ ���� ���� " #: ../../install_steps_interactive.pm_.c:213 msgid "Here is the full list of keyboards available" msgstr "���� ��������� ��� Ţ����Ĩ��� ������ ���� ������������" #: ../../install_steps_interactive.pm_.c:231 msgid "Which installation class do you want?" msgstr "����� Ũ���� ����� ���� " #: ../../install_steps_interactive.pm_.c:235 msgid "Install/Update" msgstr "������/������������о�" #: ../../install_steps_interactive.pm_.c:235 msgid "Is this an install or an update?" msgstr "�� ���ġ ���� ������������оġ ?" #: ../../install_steps_interactive.pm_.c:244 msgid "Recommended" msgstr "��� �������� ����" #: ../../install_steps_interactive.pm_.c:247 #: ../../install_steps_interactive.pm_.c:250 msgid "Expert" msgstr "�Ȣ��" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 msgid "Upgrade" msgstr "������������о�" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 msgid "Upgrade packages only" msgstr "�������� ���� �������������" #: ../../install_steps_interactive.pm_.c:275 msgid "Please choose the type of your mouse." msgstr "��צ���, ���� �Ģ¢� Ũ���� ����� ������� " #: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:60 msgid "Mouse Port" msgstr "�Ģ ���������� Ш�" #: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:61 msgid "Please choose on which serial port your mouse is connected to." msgstr "��צ���, ���� �Ģ ���������� ���������� Ш�Ũ�� ����� �������" #: ../../install_steps_interactive.pm_.c:290 msgid "Buttons emulation" msgstr "����� ������" #: ../../install_steps_interactive.pm_.c:292 msgid "Button 2 Emulation" msgstr "2-����� ������" #: ../../install_steps_interactive.pm_.c:293 msgid "Button 3 Emulation" msgstr "3-����� ������" #: ../../install_steps_interactive.pm_.c:314 msgid "Configuring PCMCIA cards..." msgstr "PCMCIA �𨼸� ��Ũ����θ���..." #: ../../install_steps_interactive.pm_.c:314 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring IDE" msgstr "IDE ��Ũ����θ���..." #: ../../install_steps_interactive.pm_.c:321 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:338 msgid "No partition available" msgstr "Ÿ�� �������" #: ../../install_steps_interactive.pm_.c:341 msgid "Scanning partitions to find mount points" msgstr "���� ��Ǣ��측� Ÿ���� �����θ����" #: ../../install_steps_interactive.pm_.c:349 msgid "Choose the mount points" msgstr "���� ��Ǣ��� ����� ���" #: ../../install_steps_interactive.pm_.c:379 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "���̿�è� ���� �������. ���� ������. �ɡ� ���� Ģ�� ��� ��è� ��� " "ʧ���� ����������" #: ../../install_steps_interactive.pm_.c:388 msgid "No root partition found to perform an upgrade" msgstr "��������� ������ �� Ÿ�� ��� ������Ţ���" #: ../../install_steps_interactive.pm_.c:389 msgid "Root Partition" msgstr "�� Ÿ��" #: ../../install_steps_interactive.pm_.c:390 msgid "What is the root partition (/) of your system?" msgstr "���� �����¢� �� Ÿ�� (/) ��� ����?" #: ../../install_steps_interactive.pm_.c:404 msgid "You need to reboot for the partition table modifications to take place" msgstr "����� ���� ������� ������ ���� ������� �ڦ����� ������" #: ../../install_steps_interactive.pm_.c:428 msgid "Choose the partitions you want to format" msgstr "�� Ÿ�� ������ ���Φ�� ���� �������" #: ../../install_steps_interactive.pm_.c:429 msgid "Check bad blocks?" msgstr "������ ������ ������?" #: ../../install_steps_interactive.pm_.c:456 msgid "Formatting partitions" msgstr "Ÿ���� �����θ����" #: ../../install_steps_interactive.pm_.c:458 #, c-format msgid "Creating and formatting file %s" msgstr "%s ��� ����� ��š����� �����θ����" #: ../../install_steps_interactive.pm_.c:463 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "%s ��� ��������� ������� ��Ţ���. ��� ����տ��� ��� �â����ġ��? " #: ../../install_steps_interactive.pm_.c:465 msgid "Not enough swap space to fulfill installation, please add some" msgstr "�������� ������� �������, ��צ��� ���� ��Ȣ� ������" #: ../../install_steps_interactive.pm_.c:472 msgid "Looking for available packages and rebuilding rpm database..." msgstr "����� ������� �����¢����� rpm ��� ����� �θ����" #: ../../install_steps_interactive.pm_.c:473 msgid "Looking for available packages..." msgstr "����� ������� �����¢���θ����" #: ../../install_steps_interactive.pm_.c:476 msgid "Looking at packages already installed..." msgstr "���ɧ� ���������� ������� �����¢���θ����" #: ../../install_steps_interactive.pm_.c:480 msgid "Finding packages to upgrade..." msgstr "��������� ����� ������� �Ȣ���θ����" #: ../../install_steps_interactive.pm_.c:498 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "���� ���� ������� ������� (%d > %d)" #: ../../install_steps_interactive.pm_.c:534 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "��צ��� ���� ����� ����� �� ��������� �������.\n" "��š� ������� Ө� ��ɢ����-���Ũ� ��� �����" #: ../../install_steps_interactive.pm_.c:536 msgid "Load from floppy" msgstr "��������� ���� ������" #: ../../install_steps_interactive.pm_.c:536 msgid "Save on floppy" msgstr "��������� ��������" #: ../../install_steps_interactive.pm_.c:540 msgid "Loading from floppy" msgstr "��������� ���� �����θ���" #: ../../install_steps_interactive.pm_.c:540 msgid "Package selection" msgstr "������� ����" #: ../../install_steps_interactive.pm_.c:545 msgid "Insert a floppy containing package selection" msgstr "������� ������ ���� ������� ��ǣ� ������" #: ../../install_steps_interactive.pm_.c:627 msgid "Selected size is larger than available space" msgstr "����� ���� ������ ���, �������� Ţ� ������� ����" #: ../../install_steps_interactive.pm_.c:642 msgid "Type of install" msgstr "����� Ө�" #: ../../install_steps_interactive.pm_.c:643 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "����� ����� ���� ������ ���� ����Ţ���.\n" "��צ��� ������ ����¡ɨ� ���� ������" #: ../../install_steps_interactive.pm_.c:646 msgid "With X" msgstr "X ��� Ũ�Ţ���Ƣ¢�� ������ �� ����" #: ../../install_steps_interactive.pm_.c:648 msgid "With basic documentation (recommended!)" msgstr "��Ţ ���ټ� (̨����� �� ����!)" #: ../../install_steps_interactive.pm_.c:649 msgid "Truly minimal install (especially no urpmi)" msgstr "���Ȣ� �����(urpmi ܼ ����¡�)" #: ../../install_steps_interactive.pm_.c:734 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "���� ��� ����� ������ ���� �â �� ��Ǣ� ������.\n" "��� ܼ ���Ħ��ȡ� ���� ����� ��Ǣ� ������\n" "��� ��ʸ� ���� ���Ħ��ȡ� ��ġ����� ���� ��츢Ţ�� �â �� ��Ǣ� ������" #: ../../install_steps_interactive.pm_.c:739 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr " \"%s\" �� ���â���� ���" #: ../../install_steps_interactive.pm_.c:760 msgid "Preparing installation" msgstr "���� �����̸���" #: ../../install_steps_interactive.pm_.c:769 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "�� ����� ������θ���%s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:815 msgid "Post-install configuration" msgstr "���Ţ���� ���� ����� ��Ũ��Ҹ�" #: ../../install_steps_interactive.pm_.c:821 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "��צ��� �������� ����� %s ��츢¢� ������" #: ../../install_steps_interactive.pm_.c:827 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "��צ��� ��������������� �� ����� %s ��츢¢� ������" #: ../../install_steps_interactive.pm_.c:847 msgid "" "You now have the opportunity to download encryption software.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "����� �����Ȣ£� ���� ���� ������� ��츢 ���� š��� ���� \n" "\n" "��â쨸 \n" "\n" "�ɡ� ���š� ������ ��� ����Ǣ� �� ����� �����θ� ���ġ�\n" "��� ��ȡ�� ����� ���� ������\n" "���� Ţ������� ���� ������\n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" #: ../../install_steps_interactive.pm_.c:886 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "�� ������� ���� ��� ���� ��Ǣ¢� ��� ��Ǣ���\n" "��� ����š� ���Ƹ�� �����, ��и��� ̨���θ��\n" "����� ��Ǣ¢����� \n" "\n" "����� ���� ������ ������� ����\n" "\n" "\n" "����� ���� Ţ����� ?" #: ../../install_steps_interactive.pm_.c:901 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "�������� ���� ����Ҿ����� �Ȣ� ���ʧ�� ���¾�� �����Ҧ������θ���" #: ../../install_steps_interactive.pm_.c:906 msgid "Choose a mirror from which to get the packages" msgstr "�������� ������� ��� Ţ��Ҹ�ȣ���" #: ../../install_steps_interactive.pm_.c:915 msgid "Contacting the mirror to get the list of available packages..." msgstr "���� ����Ҿ���Ǣ� �������� �������� �Ȣ� ���¾�� �����Ҧ������θ���" #: ../../install_steps_interactive.pm_.c:943 msgid "Which is your timezone?" msgstr "����� �� ��� ����� ������?" #: ../../install_steps_interactive.pm_.c:948 msgid "Hardware clock set to GMT" msgstr "������� �ʸ��� GMT �� ����" #: ../../install_steps_interactive.pm_.c:949 msgid "Automatic time synchronization (using NTP)" msgstr "��ɢ���� ��� ���츢(NTP ��ŢԼ�)" #: ../../install_steps_interactive.pm_.c:956 msgid "NTP Server" msgstr "NTP ����¸�" #: ../../install_steps_interactive.pm_.c:990 #: ../../install_steps_interactive.pm_.c:998 msgid "Remote CUPS server" msgstr "����� �� ����¸�" #: ../../install_steps_interactive.pm_.c:991 msgid "No printer" msgstr "�������Ȣ �������" #: ../../install_steps_interactive.pm_.c:1008 msgid "Do you have an ISA sound card?" msgstr "���Ǣ�� ISA �Ģ�� ����� ����š?" #: ../../install_steps_interactive.pm_.c:1010 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "\"sndconfig\" ��� ���� ��� ���� �Ģ�𨼨� ��Ũ�� ����" #: ../../install_steps_interactive.pm_.c:1012 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "�Ģ�� ��� ������� ���Ţ���. ʧ��������� ��¡Ţ�� ����������" #: ../../install_steps_interactive.pm_.c:1017 ../../steps.pm_.c:27 msgid "Summary" msgstr "���" #: ../../install_steps_interactive.pm_.c:1020 msgid "Mouse" msgstr "�Ģ" #: ../../install_steps_interactive.pm_.c:1022 msgid "Timezone" msgstr "��� ����" #: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2989 #: ../../printerdrake.pm_.c:3078 msgid "Printer" msgstr "�������Ȣ" #: ../../install_steps_interactive.pm_.c:1025 msgid "ISDN card" msgstr "ISDN ��" #: ../../install_steps_interactive.pm_.c:1028 #: ../../install_steps_interactive.pm_.c:1030 msgid "Sound card" msgstr "�Ģ��" #: ../../install_steps_interactive.pm_.c:1033 msgid "TV card" msgstr "TV ��" #: ../../install_steps_interactive.pm_.c:1075 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1104 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1076 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1113 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1077 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1121 #: ../../install_steps_interactive.pm_.c:1127 msgid "Windows Domain" msgstr "Ţ����� ���" #: ../../install_steps_interactive.pm_.c:1078 #: ../../install_steps_interactive.pm_.c:1100 msgid "Local files" msgstr "��Ǩ� ����Ҹ�" #: ../../install_steps_interactive.pm_.c:1087 #: ../../install_steps_interactive.pm_.c:1088 ../../steps.pm_.c:24 msgid "Set root password" msgstr "���� ������� ��š���" #: ../../install_steps_interactive.pm_.c:1089 msgid "No password" msgstr "����� �������" #: ../../install_steps_interactive.pm_.c:1094 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "���� ����� ��� ��Ȣ¾�� ���� (̨�� ��� �� %d ������ ��� �����) " #: ../../install_steps_interactive.pm_.c:1100 ../../network/modem.pm_.c:49 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:173 msgid "Authentication" msgstr "��̡���" #: ../../install_steps_interactive.pm_.c:1108 msgid "Authentication LDAP" msgstr "��̡��� LDAP" #: ../../install_steps_interactive.pm_.c:1109 msgid "LDAP Base dn" msgstr "LDAP Base dn" #: ../../install_steps_interactive.pm_.c:1110 msgid "LDAP Server" msgstr "LDAP ����¸�" #: ../../install_steps_interactive.pm_.c:1116 msgid "Authentication NIS" msgstr "��̡��� NIS" #: ../../install_steps_interactive.pm_.c:1117 msgid "NIS Domain" msgstr "NIS ���" #: ../../install_steps_interactive.pm_.c:1118 msgid "NIS Server" msgstr "NIS ����¸�" #: ../../install_steps_interactive.pm_.c:1124 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "��� ����� ����� ����� ���� ��ȡ� \n" "���� ���� ��츢ȣ��� �� \n" "����. ����¡� �����¢� ��� �������� \n" "��ŢԼ� ���ʧ�� Ģ�쨅 �������. ���� �����Ģ���\n" "���ڨ�¡� ����� ���� š����. š�����\n" "��צ��� ������� �������" #: ../../install_steps_interactive.pm_.c:1126 msgid "Authentication Windows Domain" msgstr "��̡��� Ţ����� ���" #: ../../install_steps_interactive.pm_.c:1128 msgid "Domain Admin User Name" msgstr "Ţ����� ���� ���� ����" #: ../../install_steps_interactive.pm_.c:1129 msgid "Domain Admin Password" msgstr "Ţ����� ��� ���š��¢� �����" #: ../../install_steps_interactive.pm_.c:1164 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "��� ����� ����� ����� ���� ��ȡ� \n" "���� ���� ��츢ȣ��� �� \n" "����. ����¡� �����¢� ��� �������� \n" "��ŢԼ� ���ʧ�� Ģ�쨅 �������. ���� �����Ģ���\n" "���ڨ�¡� ����� ���� š����. š�����\n" "��צ��� ������� �������" #: ../../install_steps_interactive.pm_.c:1180 msgid "First floppy drive" msgstr "Ӿ� ������� ��츢" #: ../../install_steps_interactive.pm_.c:1181 msgid "Second floppy drive" msgstr "2�� ������� ��츢" #: ../../install_steps_interactive.pm_.c:1182 ../../printerdrake.pm_.c:2515 msgid "Skip" msgstr "�Ţ�" #: ../../install_steps_interactive.pm_.c:1187 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "������ ����� �ɢ���� �������� ��š�ġ�.\n" "�� ��������� ����� ���� �����¢� ������ ��è�\n" "�ؾ�츢 Ţ�� ��� ��� ������� ���ġ�\n" "��� ���� ������� ����� ��� ����ɸ����\n" "�â ���� ����\n" "����� �� �ɢ���� �������� ��š� Ţ��Ҹ�ȣ��ǡ\n" "%s" #: ../../install_steps_interactive.pm_.c:1193 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(��â쨸! ����� XFS ���������� ���� �� Ÿ��Ȣ� ������и�ȣ���\n" "��� ��츿��� ������â��.��ɡ� 1.44 ������� �������� �������)." #: ../../install_steps_interactive.pm_.c:1201 msgid "Sorry, no floppy drive available" msgstr "��ɢ���, �������� ��츢 �������" #: ../../install_steps_interactive.pm_.c:1205 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr " �������� ��š� �������� ��츢�� ����� �������" #: ../../install_steps_interactive.pm_.c:1209 #, c-format msgid "Insert a floppy in %s" msgstr " %s � ������� ��ǣ� �������" #: ../../install_steps_interactive.pm_.c:1212 msgid "Creating bootdisk..." msgstr "������ ��š�����" #: ../../install_steps_interactive.pm_.c:1219 msgid "Preparing bootloader..." msgstr "���̿�è� ��š�̸����..." #: ../../install_steps_interactive.pm_.c:1230 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "��צ��� ����ž�� ������ ����������" #: ../../install_steps_interactive.pm_.c:1236 msgid "Do you want to use aboot?" msgstr "��צ��� ����ž�� ������ ����������" #: ../../install_steps_interactive.pm_.c:1239 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "��צ��� ����ž�� ������ ����������" #: ../../install_steps_interactive.pm_.c:1246 msgid "Installing bootloader" msgstr "���̿�è� ������θ���" #: ../../install_steps_interactive.pm_.c:1252 msgid "Installation of bootloader failed. The following error occured:" msgstr "���̿�è� �������ž�� ���� ��������" #: ../../install_steps_interactive.pm_.c:1260 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "��צ��� ����ž�� ������ ���������� You may need to change your Open " "Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." #: ../../install_steps_interactive.pm_.c:1294 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "���� ������� %s ��츢¢� ��Ǣ���" #: ../../install_steps_interactive.pm_.c:1298 msgid "Creating auto install floppy..." msgstr "��ɢ���� ������� ��š���" #: ../../install_steps_interactive.pm_.c:1309 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "��� ������ ���� ������Ţ���\n" "\n" "����� ����� ����� Ţ�� ��Ǣ��� Ţ��Ҹ�ȣ��ǡ?" #: ../../install_steps_interactive.pm_.c:1320 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "š�����, ���� ���Ȣ����� ����\n" "���������, ����� ��ʨ��� ��Ǣ�� ����Ţ�� �ڦ����� ������.\n" "\n" "\n" "���� ���ʧ�� Ģ� ��Ȣ� ����� �������� \n" "�����ȢŢ��� ������ \n" "\n" "\n" "%s\n" "\n" "\n" "��צ��� ���� ������� ��Ũ�� ���ʧ�� ��Ţ����� \n" "�����" #: ../../install_steps_interactive.pm_.c:1333 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../install_steps_interactive.pm_.c:1338 msgid "Generate auto install floppy" msgstr "��ɢ���� ������� ��š���" #: ../../install_steps_interactive.pm_.c:1340 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "��ɢ���� ��������� ��� ����� ���Ũ� ,\n" "���� ��ɡ� ���� ���ġ�,\n" "�� ���� �� ������Ǣ� ��� ���� ����,\n" "�����ġ�,\n" ",\n" "����� ����� ��Ө� ���� ���Ũ� �� ���� ����ġ�,\n" #: ../../install_steps_interactive.pm_.c:1345 msgid "Automated" msgstr "��ɢ����" #: ../../install_steps_interactive.pm_.c:1345 msgid "Replay" msgstr "�� ����" #: ../../install_steps_interactive.pm_.c:1348 msgid "Save packages selection" msgstr "������ ������ ����" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Mandrake Linux Installation %s" msgstr "���ʧ�� Ģ�� ����� %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:35 msgid "" " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " msgstr "" " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "kdesu ����" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "consolehelper ����" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "����� ����� ����� ���" #: ../../interactive.pm_.c:320 msgid "Advanced" msgstr "�ġ��¡� " #: ../../interactive.pm_.c:321 ../../security/main.pm_.c:103 msgid "Basic" msgstr "�����" #: ../../interactive/newt.pm_.c:195 ../../my_gtk.pm_.c:158 #: ../../printerdrake.pm_.c:2169 msgid "<- Previous" msgstr "<- ����" #: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197 #: ../../standalone/drakbackup_.c:4114 ../../standalone/drakbackup_.c:4141 #: ../../standalone/drakbackup_.c:4171 ../../standalone/drakbackup_.c:4197 msgid "Next" msgstr "����" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "��ȡ� ����, ����� ������� ������\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "���� ����? (��������� %s) " #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "����� ����� ����¨� \n" "%s" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr ",���� ����? (0/1 ��������� %s)" #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" msgstr "����� %s: %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" msgstr "���� �� ���� ��Ǣ� ���� ������?" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "enter `void' for void entry" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "���� ����? (��������� `%s'%s)" #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> ����� ���ž�� �� ����(%s).\n" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "��צ��� ����� Ţ���� 10-ţ� Ӿ� �� ����� ���,\n" "���� Ѩ�� ��Ţ�� ��� �������\n" "���� ����? " #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> ��ɢ���, ���� ��Ȣ����\n" "%s" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "�� ����" #: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:187 msgid "Czech (QWERTZ)" msgstr "���(����)" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:189 msgid "German" msgstr "�����" #: ../../keyboard.pm_.c:154 msgid "Dvorak" msgstr "�šá�" #: ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:197 msgid "Spanish" msgstr "���ɢ�" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Finnish" msgstr "���ɢ�" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "French" msgstr "����� " #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:231 msgid "Norwegian" msgstr "����� " #: ../../keyboard.pm_.c:159 msgid "Polish" msgstr "���Ģ�" #: ../../keyboard.pm_.c:160 ../../keyboard.pm_.c:239 msgid "Russian" msgstr "Ä���" #: ../../keyboard.pm_.c:162 ../../keyboard.pm_.c:241 msgid "Swedish" msgstr "�Ţʉ" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:257 msgid "UK keyboard" msgstr "����� Ţ����Ĩ�" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:258 msgid "US keyboard" msgstr "���â� Ţ����Ĩ�" #: ../../keyboard.pm_.c:166 msgid "Albanian" msgstr "����ɢ��" #: ../../keyboard.pm_.c:167 msgid "Armenian (old)" msgstr "����ɢ��(����)" #: ../../keyboard.pm_.c:168 msgid "Armenian (typewriter)" msgstr "����ɢ��(����)" #: ../../keyboard.pm_.c:169 msgid "Armenian (phonetic)" msgstr "����ɢ��(�Ģ¨���)" #: ../../keyboard.pm_.c:174 msgid "Azerbaidjani (latin)" msgstr "��������" #: ../../keyboard.pm_.c:176 msgid "Belgian" msgstr "�������" #: ../../keyboard.pm_.c:177 msgid "Bengali" msgstr "������" #: ../../keyboard.pm_.c:178 msgid "Bulgarian (phonetic)" msgstr "����â�(�Ģ¨���)" #: ../../keyboard.pm_.c:179 msgid "Bulgarian (BDS)" msgstr "����â�(��ʅ)" #: ../../keyboard.pm_.c:180 msgid "Brazilian (ABNT-2)" msgstr "���ú��" #: ../../keyboard.pm_.c:183 msgid "Bosnian" msgstr "����ɢ¡" #: ../../keyboard.pm_.c:184 msgid "Belarusian" msgstr "��ġՊ" #: ../../keyboard.pm_.c:185 msgid "Swiss (German layout)" msgstr "�Ţ�(�����)" #: ../../keyboard.pm_.c:186 msgid "Swiss (French layout)" msgstr "�Ţ�(������)" #: ../../keyboard.pm_.c:188 msgid "Czech (QWERTY)" msgstr "���(�����)" #: ../../keyboard.pm_.c:190 msgid "German (no dead keys)" msgstr "�����" #: ../../keyboard.pm_.c:191 msgid "Devanagari" msgstr "" #: ../../keyboard.pm_.c:192 msgid "Danish" msgstr "���" #: ../../keyboard.pm_.c:193 msgid "Dvorak (US)" msgstr "�š��(US)" #: ../../keyboard.pm_.c:194 msgid "Dvorak (Norwegian)" msgstr "�š��(�����)" #: ../../keyboard.pm_.c:195 msgid "Dvorak (Swedish)" msgstr "�š��-�Ţ�� " #: ../../keyboard.pm_.c:196 msgid "Estonian" msgstr "�����ɢ¡" #: ../../keyboard.pm_.c:200 msgid "Georgian (\"Russian\" layout)" msgstr "�����¡(\"Russian\" layout)" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Latin\" layout)" msgstr "�����¡" #: ../../keyboard.pm_.c:202 msgid "Greek" msgstr "������ " #: ../../keyboard.pm_.c:203 msgid "Gujarati" msgstr "" #: ../../keyboard.pm_.c:204 msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Hungarian" msgstr "����â� " #: ../../keyboard.pm_.c:206 msgid "Croatian" msgstr "̧ú�� " #: ../../keyboard.pm_.c:207 msgid "Israeli" msgstr "����Ģ�" #: ../../keyboard.pm_.c:208 msgid "Israeli (Phonetic)" msgstr "����Ģ�(�Ģ¨���)" #: ../../keyboard.pm_.c:209 msgid "Iranian" msgstr "�áɢ�" #: ../../keyboard.pm_.c:210 msgid "Icelandic" msgstr "��ġ�� " #: ../../keyboard.pm_.c:211 msgid "Italian" msgstr "��Ģ� " #: ../../keyboard.pm_.c:212 msgid "Inuktitut" msgstr "" #: ../../keyboard.pm_.c:213 msgid "Japanese 106 keys" msgstr "����ɢ� 106 Ţ��" #: ../../keyboard.pm_.c:216 msgid "Korean keyboard" msgstr "���â� Ţ����Ĩ�" #: ../../keyboard.pm_.c:217 msgid "Latin American" msgstr "��� ���â�" #: ../../keyboard.pm_.c:218 msgid "Laotian" msgstr "ġ�š�" #: ../../keyboard.pm_.c:219 msgid "Lithuanian AZERTY (old)" msgstr "ĢЧ�ɢ�-����" #: ../../keyboard.pm_.c:221 msgid "Lithuanian AZERTY (new)" msgstr "ĢЧ�ɢ�-Ҿ��" #: ../../keyboard.pm_.c:222 msgid "Lithuanian \"number row\" QWERTY" msgstr "ĢЧ�ɢ�-�����" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "ĢЧ�ɢ�-�Ģ¨��� �����" #: ../../keyboard.pm_.c:224 msgid "Latvian" msgstr "ġ�Ţ�" #: ../../keyboard.pm_.c:225 msgid "Macedonian" msgstr "�������ɢ�" #: ../../keyboard.pm_.c:226 msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Mongolian (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:228 msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm_.c:229 msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm_.c:230 msgid "Dutch" msgstr "���" #: ../../keyboard.pm_.c:232 msgid "Polish (qwerty layout)" msgstr "���Ģ�(�����)" #: ../../keyboard.pm_.c:233 msgid "Polish (qwertz layout)" msgstr "���Ģ�(�š���)" #: ../../keyboard.pm_.c:234 msgid "Portuguese" msgstr "�����и����" #: ../../keyboard.pm_.c:235 msgid "Canadian (Quebec)" msgstr "����(Quebec)" #: ../../keyboard.pm_.c:237 msgid "Romanian (qwertz)" msgstr "�á��ɢ�(�š���)" #: ../../keyboard.pm_.c:238 msgid "Romanian (qwerty)" msgstr "�á��ɢ�(�����)" #: ../../keyboard.pm_.c:240 msgid "Russian (Yawerty)" msgstr "Ä��(¡���)" #: ../../keyboard.pm_.c:242 msgid "Slovenian" msgstr "ͧġ��ɢ�" #: ../../keyboard.pm_.c:243 msgid "Slovakian (QWERTZ)" msgstr "ͧġ��ɢ�(�š���)" #: ../../keyboard.pm_.c:244 msgid "Slovakian (QWERTY)" msgstr "ͧġ��ɢ�(�����)" #: ../../keyboard.pm_.c:246 msgid "Serbian (cyrillic)" msgstr "������" #: ../../keyboard.pm_.c:248 msgid "Tamil (Unicode)" msgstr "����(�ɢ����)" #: ../../keyboard.pm_.c:249 msgid "Tamil (TSCII)" msgstr "����(TSCII- ��� ���� ������)" #: ../../keyboard.pm_.c:250 msgid "Thai keyboard" msgstr "��� Ţ����Ĩ�" #: ../../keyboard.pm_.c:252 msgid "Tajik keyboard" msgstr "����� Ţ����Ĩ�" #: ../../keyboard.pm_.c:253 msgid "Turkish (traditional \"F\" model)" msgstr "��츢� " #: ../../keyboard.pm_.c:254 msgid "Turkish (modern \"Q\" model)" msgstr "�� ��츢� " #: ../../keyboard.pm_.c:256 msgid "Ukrainian" msgstr "���ɢ�" #: ../../keyboard.pm_.c:259 msgid "US keyboard (international)" msgstr "���â� Ţ����Ĩ�(��ŧ��)" #: ../../keyboard.pm_.c:260 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Ţ����� " #: ../../keyboard.pm_.c:261 msgid "Yugoslavian (latin)" msgstr "ԧ���ͧġŢ�" #: ../../keyboard.pm_.c:268 msgid "Right Alt key" msgstr "��� Alt Ţ��" #: ../../keyboard.pm_.c:269 msgid "Both Shift keys simultaneously" msgstr "���� Shift Ţ����� ��ȡ�" #: ../../keyboard.pm_.c:270 msgid "Control and Shift keys simultaneously" msgstr "Control ���� Shift Ţ����� ��ȡ�" #: ../../keyboard.pm_.c:271 msgid "CapsLock key" msgstr "CapsLock Ţ��" #: ../../keyboard.pm_.c:272 msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl ���� Alt Ţ����� ��ȡ�" #: ../../keyboard.pm_.c:273 msgid "Alt and Shift keys simultaneously" msgstr "Alt ���� Shift Ţ����� ��ȡ�" #: ../../keyboard.pm_.c:274 msgid "\"Menu\" key" msgstr "\"Menu\" Ţ��" #: ../../keyboard.pm_.c:275 msgid "Left \"Windows\" key" msgstr "��� Ţ����� Ţ��" #: ../../keyboard.pm_.c:276 msgid "Right \"Windows\" key" msgstr "��� Ţ����� Ţ��" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "��� ������ %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "�ý Ÿ���� ӾĢ� ����\n" #: ../../modparm.pm_.c:50 msgid "a number" msgstr "�� ��" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "%d, ���š� ��â���� ���" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "%d, ���š� ��â���� �����" #: ../../modparm.pm_.c:54 msgid "comma separated numbers" msgstr "���š� ��â���� ���" #: ../../modparm.pm_.c:54 msgid "comma separated strings" msgstr "���š� ��â���� �����" #: ../../modules.pm_.c:293 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "PCMCIA ������ 2.4 �ը� ����������" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "��-�Ģ" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "ġ�����- Logitech MouseMan+" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "����š� PS2 ��� �Ģ" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "�������¢��-GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "�������� ������ �Ģ-Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "��ɢ ���Ģ-Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "��ɢ ����ñĢ-Genius NetScroll" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 msgid "Microsoft Explorer" msgstr "���á���� Explorer-���ġ�" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 �����" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "����š� 2 ����� �Ģ" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "����" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "���������� Ш�" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "����š� 3 ����� �Ģ" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "���á���� ����Ģ" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "ġ����� �Ģ-Logitech MouseMan" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "�Ģ ������" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "ġ����� CC Ũ� �Ģ" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "ġ����� MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM Ũ�" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "ġ����� �Ģ(����, C7 Ũ�)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "���Ģ" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 �������" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 �������" #: ../../mouse.pm_.c:75 msgid "none" msgstr "��������" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "�Ģ �������" #: ../../mouse.pm_.c:486 msgid "Please test the mouse" msgstr "��צ���, ���� �Ģ�� ������ �������" #: ../../mouse.pm_.c:487 msgid "To activate the mouse," msgstr "���� �Ģ�� ������ ���" #: ../../mouse.pm_.c:488 msgid "MOVE YOUR WHEEL!" msgstr "���� ���� �������" #: ../../my_gtk.pm_.c:64 msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,-*-TSC_Avaangal-regular-r-" "*-*-25-*-*-*-p-*-tscii-0,*-r-*" #: ../../my_gtk.pm_.c:159 msgid "Finish" msgstr "����" #: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2171 msgid "Next ->" msgstr "���� ->" #: ../../my_gtk.pm_.c:287 msgid "Is this correct?" msgstr "�� �â¡?" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:222 msgid "Info" msgstr "����" #: ../../my_gtk.pm_.c:380 msgid "Expand Tree" msgstr "���Ǹ�� Ţâ" #: ../../my_gtk.pm_.c:381 msgid "Collapse Tree" msgstr "���Ǹ�� ����" #: ../../my_gtk.pm_.c:382 msgid "Toggle between flat and group sorted" msgstr "�� ���� ���� �â���������� ���Ȣ¨�" #: ../../network/adsl.pm_.c:23 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "����� ������ ������ ������" #: ../../network/adsl.pm_.c:24 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "����š� adsl ��� ����� ������ �����.\n" "pppoe ����������.��� ��� dhcp ��������\n" "������ �â¡� ��â�Ţ��� ��ȡ� pppoe �������" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "������� ����� -Alcatel speedtouch usb" #: ../../network/adsl.pm_.c:26 msgid "use dhcp" msgstr "dhcp �������" #: ../../network/adsl.pm_.c:26 msgid "use pppoe" msgstr " pppoe �������" #: ../../network/adsl.pm_.c:26 msgid "use pptp" msgstr "pptp �������" #: ../../network/drakfirewall.pm_.c:12 msgid "Web Server" msgstr "������ ����¸�" #: ../../network/drakfirewall.pm_.c:17 msgid "Domain Name Server" msgstr "DNS ����¸�" #: ../../network/drakfirewall.pm_.c:32 msgid "Mail Server" msgstr "������ ����¸�" #: ../../network/drakfirewall.pm_.c:37 msgid "POP and IMAP Server" msgstr "POP and IMAP Ũ� ������ ����¸�" #: ../../network/drakfirewall.pm_.c:111 msgid "No network card" msgstr "Ũ�¨��� �� ���� ������Ţ��� " #: ../../network/drakfirewall.pm_.c:129 msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "��������� ��Ũ���\n" "\n" "��� �Ǣ����� ������ ���� �����¢�\n" "��и��� �����. �Ž� ����\n" "����� �� ��è� ������ ������ɡ�� ���ġ�\n" "." #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "����� �� ���Ÿ�� �����Ģ��� ������ Ţ��Ҹ�ȣ���?" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm_.c:169 msgid "Other ports" msgstr "��� Шȸ��" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "" "����� �� dhcp ���ʨ� ������ �����ȣ���?\n" "���������¡� dhcpcd ����������" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Ũ�¨��� �� ���� ������Ţ���.\n" " ��ɡ� �� ����� ���� ��Ũ�� ��¡�" #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:238 msgid "Choose the network interface" msgstr "Ũ�¨��� �𨼨� ����� ���" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "�� Ũ�¨��� �� ����� �����м� ��������" #: ../../network/ethernet.pm_.c:178 msgid "no network card found" msgstr "Ũ�¨��� �� ���� ������Ţ���" #: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:362 msgid "Configuring network" msgstr "Ũ�¨�������� ��Ũ����θ���" #: ../../network/ethernet.pm_.c:203 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "���� ��â�� �����¢� ��¨�� ����� ������\n" "��� DHCP-����¸����� ���������� ����\n" "���� ���������� �â¡ɾ�� ��� �����\n" "������ ``mybox.mylab.myco.com''." #: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:367 msgid "Host name" msgstr "����������: " #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:90 ../../network/netconnect.pm_.c:104 #: ../../network/netconnect.pm_.c:159 ../../network/netconnect.pm_.c:174 #: ../../network/netconnect.pm_.c:201 ../../network/netconnect.pm_.c:224 #: ../../network/netconnect.pm_.c:232 msgid "Network Configuration Wizard" msgstr "ʧ��Ũ�¨��� ��¡Ţ" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "���� ISDN �� ���� Ũç���� ��� �ո���?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "Ҿ�� ��Ũ��� (isdn-light �𨼸�)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "���� ��Ũ��� (isdn4net)" #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188 #: ../../network/isdn.pm_.c:200 ../../network/isdn.pm_.c:206 #: ../../network/isdn.pm_.c:213 ../../network/isdn.pm_.c:223 msgid "ISDN Configuration" msgstr "ISDN Ũ�¨����� ��Ũ���" #: ../../network/isdn.pm_.c:170 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "���� ���� ����¡Ǩ�� ����� ���.\n" "��� ����Ģ����Ţ��� ��ȡ�, ����Ģ����Ţ��� ����� ����� ������" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol" msgstr "��á���� Ũ�Ө�" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol (EDSS1)" msgstr "��á���� Ũ�Ө�(EDSS1)" #: ../../network/isdn.pm_.c:185 msgid "Protocol for the rest of the world" msgstr "���� �̾��Ǣ� ���������� Ũ�Ө�" #: ../../network/isdn.pm_.c:185 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "���� �̾��Ǣ� ���������� Ũ�Ө�\n" "No D-Channel (� ����Ҹ�)" #: ../../network/isdn.pm_.c:189 msgid "Which protocol do you want to use?" msgstr "����� �� Ũ�ӨȨ� ������ �����ȣ���?" #: ../../network/isdn.pm_.c:200 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm_.c:207 msgid "What kind of card do you have?" msgstr "��Ţ� �𨼨� ���о��츢ȣ���?" #: ../../network/isdn.pm_.c:208 msgid "I don't know" msgstr "���� ��â¡�" #: ../../network/isdn.pm_.c:208 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:208 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:214 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" #: ../../network/isdn.pm_.c:218 msgid "Abort" msgstr "�Ȣ�� Ţ�" #: ../../network/isdn.pm_.c:218 msgid "Continue" msgstr "������" #: ../../network/isdn.pm_.c:224 msgid "Which is your ISDN card?" msgstr "����� �� ISDN �𨼨� ������и�ȣ���?" #: ../../network/isdn.pm_.c:243 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" #: ../../network/isdn.pm_.c:252 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../network/modem.pm_.c:39 msgid "Please choose which serial port your modem is connected to." msgstr "��צ���, ���� ����� ���������� ���������� ШȨ� ����� �������" #: ../../network/modem.pm_.c:44 msgid "Dialup options" msgstr "����� �Ƣ Ţ������" #: ../../network/modem.pm_.c:45 ../../standalone/drakconnect_.c:621 msgid "Connection name" msgstr "�������� ����: " #: ../../network/modem.pm_.c:46 ../../standalone/drakconnect_.c:622 msgid "Phone number" msgstr "���� ����� ����ħ��� ��" #: ../../network/modem.pm_.c:47 ../../standalone/drakconnect_.c:623 msgid "Login ID" msgstr "�����������" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "PAP" msgstr "PAP-����š� ������� �о�� ����" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "Script-based" msgstr "����� �Ƣ¡�" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "Terminal-based" msgstr "Ө��� �Ƣ¡�" #: ../../network/modem.pm_.c:50 ../../standalone/drakconnect_.c:626 msgid "Domain name" msgstr "���� ����" #: ../../network/modem.pm_.c:51 ../../standalone/drakconnect_.c:627 msgid "First DNS Server (optional)" msgstr "Ӿ� DNS ����¸�� ����" #: ../../network/modem.pm_.c:52 ../../standalone/drakconnect_.c:628 msgid "Second DNS Server (optional)" msgstr "2�� DNS ����¸�� ����" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "����� ���� ������� ����ġ�, ���� ����Ũ��ġ�" #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "����� ���� ������� ����Ũ��ġ�" #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "����� ������ ����� ����� ��ǣ���" #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "����� ���� ������� ����ġ�, ���� ����Ũ��ġ�" #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "����� ������ ����� ����� ����" #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "������" #: ../../network/netconnect.pm_.c:38 msgid "Disconnect" msgstr "������ ������" #: ../../network/netconnect.pm_.c:40 msgid "Configure the connection" msgstr "�������� ��Ũ�����" #: ../../network/netconnect.pm_.c:45 msgid "Internet connection & configuration" msgstr "������� ��Ũ������" #: ../../network/netconnect.pm_.c:95 #, c-format msgid "We are now going to configure the %s connection." msgstr "��� ������ %s ��� ������� ��Ũ���������ȡ�" #: ../../network/netconnect.pm_.c:104 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "��� ������ %s ��� ������� ��Ũ���������ȡ�.\n" "\n" "\n" "�â ����� ��Ǣ� ������" #: ../../network/netconnect.pm_.c:133 ../../network/netconnect.pm_.c:251 #: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:63 msgid "Network Configuration" msgstr "Ũ�¨����� ��Ũ��� " #: ../../network/netconnect.pm_.c:134 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../network/netconnect.pm_.c:160 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "ʧ��Ũ�¨��� ��¡Ţ�� �ո.\n" "\n" "������ ���� ����/Ũ�¨��� ��Ũ����θ���\n" "��ɡ� ������� ����ȡ�, �� ����� �����.\n" #: ../../network/netconnect.pm_.c:166 msgid "Choose the profile to configure" msgstr "��Ũ�� �����Ȣ��� ����� ������" #: ../../network/netconnect.pm_.c:167 msgid "Use auto detection" msgstr "��ɡ� ���������" #: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3203 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277 #: ../../standalone/drakfloppy_.c:146 msgid "Expert Mode" msgstr "�Ȣ�� ӨȨ�" #: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:399 msgid "Detecting devices..." msgstr "������� ���������θ���..." #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 msgid "Normal modem connection" msgstr "����� ������Ƣ ������" #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 #, c-format msgid "detected on port %s" msgstr "%s ��� Ш�¢� ��������������" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 msgid "ISDN connection" msgstr "ISDN ������" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 #, c-format msgid "detected %s" msgstr " %s ��������������" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 msgid "ADSL connection" msgstr "ADSL ������" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 #, c-format msgid "detected on interface %s" msgstr "%s ��� Ш�¢� ��������������" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 msgid "Cable connection" msgstr "����� ������" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 msgid "cable connection detected" msgstr "����� ������ ��������������" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "LAN connection" msgstr "LAN ������" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "ethernet card(s) detected" msgstr "Ũ�¨��� ��(��) ��������������" #: ../../network/netconnect.pm_.c:201 msgid "Choose the connection you want to configure" msgstr "������ Ţ������ ������ ��Ũ����" #: ../../network/netconnect.pm_.c:225 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "����� ����� �� ӨȸǢ� ������� ����� ����\n" "����� ������ Ţ���� ӨȨ�� �����\n" "\n" #: ../../network/netconnect.pm_.c:226 msgid "Internet connection" msgstr "����� ������" #: ../../network/netconnect.pm_.c:232 msgid "Do you want to start the connection at boot?" msgstr "���� �������� ����� ������������ ��������.? ����š� �� ����¢���" #: ../../network/netconnect.pm_.c:246 msgid "Network configuration" msgstr "Ũ�¸���� ��Ũ��� " #: ../../network/netconnect.pm_.c:247 msgid "The network needs to be restarted" msgstr "Ũ�¸����� ���Ÿ� �ڦ����� �����" #: ../../network/netconnect.pm_.c:251 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Ũ�¸����� ���Ÿ� �ڦ���������� ���� �������� \n" "\n" "%s" #: ../../network/netconnect.pm_.c:261 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "š�����, ���� Ũ�¸���� ���� ����� ������\n" "���Ȣ����� ����. �� ��Ũ��Ҹ� ����������\n" "\n" #: ../../network/netconnect.pm_.c:265 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../network/netconnect.pm_.c:266 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/network.pm_.c:291 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network/network.pm_.c:296 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307 #, c-format msgid "Configuring network device %s" msgstr "Ũ�¨��� �� %s ��Ũ����θ���" #: ../../network/network.pm_.c:307 #, c-format msgid " (driver %s)" msgstr "(��� ���� %s)" #: ../../network/network.pm_.c:309 ../../standalone/drakconnect_.c:231 #: ../../standalone/drakconnect_.c:467 msgid "IP address" msgstr "" #: ../../network/network.pm_.c:310 ../../standalone/drakconnect_.c:468 #: ../../standalone/drakgw_.c:295 msgid "Netmask" msgstr "" #: ../../network/network.pm_.c:311 msgid "(bootp/dhcp)" msgstr "" #: ../../network/network.pm_.c:311 msgid "Automatic IP" msgstr "��ɢ�� IP" #: ../../network/network.pm_.c:312 msgid "Start at boot" msgstr "������Ģ� ��츢Ţ� " #: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:875 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:363 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../../network/network.pm_.c:368 msgid "DNS server" msgstr "DNS ����¸�" #: ../../network/network.pm_.c:369 #, c-format msgid "Gateway (e.g. %s)" msgstr "Ѩ�š¢�(���. %s)" #: ../../network/network.pm_.c:371 msgid "Gateway device" msgstr "Ѩ�š¢� �����" #: ../../network/network.pm_.c:376 msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:380 msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:394 msgid "Proxies configuration" msgstr "��ɡ�� ��Ũ���" #: ../../network/network.pm_.c:395 msgid "HTTP proxy" msgstr "HTTP ��ɡ��" #: ../../network/network.pm_.c:396 msgid "FTP proxy" msgstr "FTP ��ɡ��" #: ../../network/network.pm_.c:397 msgid "Track network card id (useful for laptops)" msgstr "" #: ../../network/network.pm_.c:400 msgid "Proxy should be http://..." msgstr "" #: ../../network/network.pm_.c:401 ../../proxy.pm_.c:65 msgid "Url should begin with 'ftp:' or 'http:'" msgstr "URL ������� 'http:' ���� 'ftp: Լ� ���� �����" #: ../../network/shorewall.pm_.c:25 msgid "Firewalling configuration detected!" msgstr "��������� ��Ũ��� ����������" #: ../../network/shorewall.pm_.c:26 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "��������� ��Ũ����� ���� ��������" #: ../../network/tools.pm_.c:41 msgid "Internet configuration" msgstr "���� ��Ũ��� " #: ../../network/tools.pm_.c:42 msgid "Do you want to try to connect to the Internet now?" msgstr "����� ����� ������ ���� ������? [������� ������ �츢��]" #: ../../network/tools.pm_.c:46 ../../standalone/drakconnect_.c:196 msgid "Testing your connection..." msgstr "����� ������� ������θ���" #: ../../network/tools.pm_.c:56 msgid "The system is now connected to Internet." msgstr "���� ����� ������ ������ ��������" #: ../../network/tools.pm_.c:57 msgid "For security reason, it will be disconnected now." msgstr "" #: ../../network/tools.pm_.c:58 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" #: ../../network/tools.pm_.c:82 msgid "Connection Configuration" msgstr "������� ��Ũ������" #: ../../network/tools.pm_.c:83 msgid "Please fill or check the field below" msgstr "" #: ../../network/tools.pm_.c:85 ../../standalone/drakconnect_.c:607 msgid "Card IRQ" msgstr "��¢� IRQ" #: ../../network/tools.pm_.c:86 ../../standalone/drakconnect_.c:608 msgid "Card mem (DMA)" msgstr "" #: ../../network/tools.pm_.c:87 ../../standalone/drakconnect_.c:609 msgid "Card IO" msgstr "��¢� ��/��Ǣ IO" #: ../../network/tools.pm_.c:88 ../../standalone/drakconnect_.c:610 msgid "Card IO_0" msgstr "��¢� ��/��Ǣ IO_0" #: ../../network/tools.pm_.c:89 ../../standalone/drakconnect_.c:611 msgid "Card IO_1" msgstr "��¢� ��/��Ǣ IO_1" #: ../../network/tools.pm_.c:90 ../../standalone/drakconnect_.c:612 msgid "Your personal phone number" msgstr "���� ����ħ��� ��" #: ../../network/tools.pm_.c:91 ../../standalone/drakconnect_.c:613 msgid "Provider name (ex provider.net)" msgstr "����¡�â� ����" #: ../../network/tools.pm_.c:92 ../../standalone/drakconnect_.c:614 msgid "Provider phone number" msgstr "����¡�â� ����ħ��� ��" #: ../../network/tools.pm_.c:93 ../../standalone/drakconnect_.c:615 msgid "Provider dns 1 (optional)" msgstr "����¡�â� dns1 ����¸�" #: ../../network/tools.pm_.c:94 ../../standalone/drakconnect_.c:616 msgid "Provider dns 2 (optional)" msgstr "����¡�â� dns2 ����¸�" #: ../../network/tools.pm_.c:95 msgid "Choose your country" msgstr "���� ��� ����� �������" #: ../../network/tools.pm_.c:96 ../../standalone/drakconnect_.c:619 msgid "Dialing mode" msgstr "������ Ө�" #: ../../network/tools.pm_.c:97 ../../standalone/drakconnect_.c:631 msgid "Connection speed" msgstr "������ �Ÿ�: " #: ../../network/tools.pm_.c:98 ../../standalone/drakconnect_.c:632 msgid "Connection timeout (in sec)" msgstr "������ ��Ǣ���� ����(Ţ��ʸǢ�): " #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:617 msgid "Account Login (user name)" msgstr "���� ����" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:618 #: ../../standalone/drakconnect_.c:649 msgid "Account Password" msgstr "���â� �����" #: ../../network/tools.pm_.c:104 ../../network/tools.pm_.c:118 msgid "United Kingdom" msgstr "��â��" #: ../../partition_table.pm_.c:602 msgid "mount failed: " msgstr "����� ���� ��������: " #: ../../partition_table.pm_.c:666 msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm_.c:684 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "" #: ../../partition_table.pm_.c:798 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../partition_table/raw.pm_.c:189 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "����� ��� ����¨�" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "�츢���ɨ�" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "��� �Ƹ�ɨ�" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "�Ƹ�ɨ�" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "��������" #: ../../printer.pm_.c:26 msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer.pm_.c:27 msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer.pm_.c:28 msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer.pm_.c:29 msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer.pm_.c:34 ../../printer.pm_.c:1181 msgid "CUPS" msgstr "" #: ../../printer.pm_.c:35 msgid "LPRng" msgstr "" #: ../../printer.pm_.c:36 msgid "LPD" msgstr "LPD-��� ���Ģ" #: ../../printer.pm_.c:37 msgid "PDQ" msgstr "PDQ-��� ���Ģ¢� ����" #: ../../printer.pm_.c:49 msgid "Local printer" msgstr "��Ǩ�� �������Ȣ" #: ../../printer.pm_.c:50 msgid "Remote printer" msgstr "������ �������Ȣ" #: ../../printer.pm_.c:51 msgid "Printer on remote CUPS server" msgstr "������ CUPS ����¸�� ��� �������Ȣ" #: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:898 msgid "Printer on remote lpd server" msgstr "������ lpd ����¸�� ��� �������Ȣ" #: ../../printer.pm_.c:53 msgid "Network printer (TCP/Socket)" msgstr "Ũ�¨���� �������Ȣ(TCP/Socket)" #: ../../printer.pm_.c:54 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "������ ���� ����¸�� ��� �������Ȣ" #: ../../printer.pm_.c:55 msgid "Printer on NetWare server" msgstr "������ NetWare ����¸�� ��� �������Ȣ" #: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:902 msgid "Enter a printer device URI" msgstr "�������Ȣ¢� Ӹ�â" #: ../../printer.pm_.c:57 msgid "Pipe job into a command" msgstr "�ŨĨ� ����� ����" #: ../../printer.pm_.c:346 ../../printer.pm_.c:388 ../../printer.pm_.c:570 msgid "Unknown Model" msgstr "��â¡� �����" #: ../../printer.pm_.c:791 ../../printer.pm_.c:982 ../../printer.pm_.c:1374 #: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:3471 msgid "Unknown model" msgstr "��â¡� ���� " #: ../../printer.pm_.c:819 msgid "Local Printers" msgstr "��Ǩ�� �������Ȣ" #: ../../printer.pm_.c:821 ../../printer.pm_.c:1182 msgid "Remote Printers" msgstr "������ �������Ȣ" #: ../../printer.pm_.c:828 ../../printerdrake.pm_.c:417 #, c-format msgid " on parallel port \\/*%s" msgstr ", ��� Ш�¢� ���� \\/*%s" #: ../../printer.pm_.c:831 ../../printerdrake.pm_.c:419 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB �������Ȣ \\/*%s" #: ../../printer.pm_.c:836 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", ��Ө� ����� ��� Ш�¢� ���� \\/*%s" #: ../../printer.pm_.c:839 msgid ", multi-function device on USB" msgstr ", ��Ө� ����� USB Ш�¢� ���� \\/*%s" #: ../../printer.pm_.c:841 msgid ", multi-function device on HP JetDirect" msgstr ", ��Ө� ����� HP JetDirect Ш�¢� ���� \\/*%s" #: ../../printer.pm_.c:843 msgid ", multi-function device" msgstr ", ��Ө� ����� " #: ../../printer.pm_.c:846 #, c-format msgid ", printing to %s" msgstr "%s �� ����θ���" #: ../../printer.pm_.c:848 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:850 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer.pm_.c:854 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer.pm_.c:858 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:860 #, c-format msgid ", using command %s" msgstr ", %s ��� ��Ǩ� ������" #: ../../printer.pm_.c:979 ../../printerdrake.pm_.c:1701 msgid "Raw printer (No driver)" msgstr "" #: ../../printer.pm_.c:1151 #, c-format msgid "(on %s)" msgstr "(%s �)" #: ../../printer.pm_.c:1153 msgid "(on this machine)" msgstr "" #: ../../printer.pm_.c:1178 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: ../../printer.pm_.c:1184 ../../printerdrake.pm_.c:3123 #: ../../printerdrake.pm_.c:3134 ../../printerdrake.pm_.c:3360 #: ../../printerdrake.pm_.c:3412 ../../printerdrake.pm_.c:3438 #: ../../printerdrake.pm_.c:3613 ../../printerdrake.pm_.c:3615 msgid " (Default)" msgstr " (���������)" #: ../../printerdrake.pm_.c:25 msgid "Select Printer Connection" msgstr "�������Ȣ ���������� Ţ�� ���� �������" #: ../../printerdrake.pm_.c:26 msgid "How is the printer connected?" msgstr "�������Ȣ ���� �����������?" #: ../../printerdrake.pm_.c:28 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" #: ../../printerdrake.pm_.c:36 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3187 msgid "CUPS configuration" msgstr "CUPS ��Ũ���" #: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3188 msgid "Specify CUPS server" msgstr "" #: ../../printerdrake.pm_.c:86 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" #: ../../printerdrake.pm_.c:87 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" #: ../../printerdrake.pm_.c:91 msgid "The IP address should look like 192.168.1.20" msgstr "" #: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1109 msgid "The port number should be an integer!" msgstr "" #: ../../printerdrake.pm_.c:102 msgid "CUPS server IP" msgstr "CUPS ����¸ IP" #: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1129 msgid "Port" msgstr "Ш�" #: ../../printerdrake.pm_.c:105 msgid "Automatic CUPS configuration" msgstr "��ɢ�� CUPS ��Ũ���" #: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247 #: ../../printerdrake.pm_.c:1574 ../../printerdrake.pm_.c:1578 #: ../../printerdrake.pm_.c:1696 ../../printerdrake.pm_.c:2248 #: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2460 #: ../../printerdrake.pm_.c:2533 ../../printerdrake.pm_.c:2554 #: ../../printerdrake.pm_.c:2747 ../../printerdrake.pm_.c:2792 #: ../../printerdrake.pm_.c:2797 ../../printerdrake.pm_.c:2831 #: ../../printerdrake.pm_.c:2836 ../../printerdrake.pm_.c:2873 #: ../../printerdrake.pm_.c:2926 ../../printerdrake.pm_.c:2946 #: ../../printerdrake.pm_.c:2960 ../../printerdrake.pm_.c:2994 #: ../../printerdrake.pm_.c:3040 ../../printerdrake.pm_.c:3058 #: ../../printerdrake.pm_.c:3147 ../../printerdrake.pm_.c:3226 #: ../../printerdrake.pm_.c:3528 ../../printerdrake.pm_.c:3583 #: ../../printerdrake.pm_.c:3636 ../../standalone/printerdrake_.c:57 msgid "Printerdrake" msgstr "ʧ��������Ȣ" #: ../../printerdrake.pm_.c:178 msgid "Checking your system..." msgstr "���� ����� ��������θ���..." #: ../../printerdrake.pm_.c:186 msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printerdrake.pm_.c:198 msgid "" "The following printers\n" "\n" msgstr "" "������� �������Ȣ��\n" "\n" #: ../../printerdrake.pm_.c:199 msgid "" "The following printer\n" "\n" msgstr "" "������� �������Ȣ\n" "\n" #: ../../printerdrake.pm_.c:201 msgid "" "\n" "and one unknown printer are " msgstr "" "\n" "���� �� ���¡�� ��â¡� �������Ȣ" #: ../../printerdrake.pm_.c:203 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" "\n" "���� %d ���¡�� ��â¡� �������Ȣ" #: ../../printerdrake.pm_.c:207 msgid "" "\n" "are " msgstr "" "\n" "���" #: ../../printerdrake.pm_.c:208 msgid "" "\n" "is " msgstr "" #: ../../printerdrake.pm_.c:210 msgid "directly connected to your system" msgstr "����¡� �����Լ� ��������" #: ../../printerdrake.pm_.c:213 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printerdrake.pm_.c:215 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printerdrake.pm_.c:221 msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (��צ���, ���� �������Ȣ ������Ǿ� �� ������ �������).\n" #: ../../printerdrake.pm_.c:235 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printerdrake.pm_.c:236 msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: ../../printerdrake.pm_.c:238 msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "���� ����������� �������Ȣ�� �� ������ ������?\n" #: ../../printerdrake.pm_.c:239 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printerdrake.pm_.c:240 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printerdrake.pm_.c:279 ../../printerdrake.pm_.c:291 #: ../../printerdrake.pm_.c:361 ../../printerdrake.pm_.c:3169 #: ../../printerdrake.pm_.c:3299 msgid "Add a new printer" msgstr "" #: ../../printerdrake.pm_.c:280 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printerdrake.pm_.c:293 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:302 ../../printerdrake.pm_.c:319 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:310 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:328 msgid "Auto-detect printers connected to this machine" msgstr "" #: ../../printerdrake.pm_.c:331 msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printerdrake.pm_.c:334 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printerdrake.pm_.c:362 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:590 #: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 msgid "Printer auto-detection" msgstr "�������Ȣ ��ɢ�� ��������" #: ../../printerdrake.pm_.c:421 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:423 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:429 #, c-format msgid "Detected %s" msgstr " %s �����������" #: ../../printerdrake.pm_.c:433 ../../printerdrake.pm_.c:464 #: ../../printerdrake.pm_.c:483 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:435 ../../printerdrake.pm_.c:466 #: ../../printerdrake.pm_.c:488 #, c-format msgid "USB printer \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:437 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:439 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:575 ../../printerdrake.pm_.c:600 msgid "Local Printer" msgstr "��Ǩ� �������Ȣ" #: ../../printerdrake.pm_.c:576 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:580 msgid "You must enter a device or file name!" msgstr "" #: ../../printerdrake.pm_.c:591 msgid "No printer found!" msgstr "" #: ../../printerdrake.pm_.c:601 msgid "Available printers" msgstr "" #: ../../printerdrake.pm_.c:605 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:606 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:608 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printerdrake.pm_.c:609 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printerdrake.pm_.c:611 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:612 msgid "Please choose the port where your printer is connected to." msgstr "��צ���, ���� �������Ȣ ��� ШȨ� ����� �������" #: ../../printerdrake.pm_.c:614 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:619 msgid "You must choose/enter a printer/device!" msgstr "" #: ../../printerdrake.pm_.c:639 msgid "Manual configuration" msgstr "��Ө� ��Ũ��� " #: ../../printerdrake.pm_.c:693 msgid "Remote lpd Printer Options" msgstr "" #: ../../printerdrake.pm_.c:694 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: ../../printerdrake.pm_.c:695 msgid "Remote host name" msgstr "������ �����¢� ����" #: ../../printerdrake.pm_.c:696 msgid "Remote printer name" msgstr "������ �������Ȣ¢� ����" #: ../../printerdrake.pm_.c:699 msgid "Remote host name missing!" msgstr "������ �����¢� ���� ����!" #: ../../printerdrake.pm_.c:703 msgid "Remote printer name missing!" msgstr "������ �������Ȣ¢� ���� ����!" #: ../../printerdrake.pm_.c:727 ../../printerdrake.pm_.c:1244 #, c-format msgid "Detected model: %s %s" msgstr "���������� ����: %s %s" #: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 msgid "Scanning network..." msgstr "" #: ../../printerdrake.pm_.c:814 ../../printerdrake.pm_.c:835 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:817 ../../printerdrake.pm_.c:838 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:858 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printerdrake.pm_.c:859 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:860 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printerdrake.pm_.c:861 msgid "SMB server host" msgstr "���� ����¸�" #: ../../printerdrake.pm_.c:862 msgid "SMB server IP" msgstr "���� ����¸�� IP" #: ../../printerdrake.pm_.c:863 msgid "Share name" msgstr "���â� ����" #: ../../printerdrake.pm_.c:866 msgid "Workgroup" msgstr "������" #: ../../printerdrake.pm_.c:868 msgid "Auto-detected" msgstr "��ɢ���� �����������" #: ../../printerdrake.pm_.c:879 msgid "Either the server name or the server's IP must be given!" msgstr "����¸�� ���� ���� IP Ӹ�â��� �������" #: ../../printerdrake.pm_.c:883 msgid "Samba share name missing!" msgstr "" #: ../../printerdrake.pm_.c:889 msgid "SECURITY WARNING!" msgstr "" #: ../../printerdrake.pm_.c:890 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:900 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:903 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printerdrake.pm_.c:975 msgid "NetWare Printer Options" msgstr "" #: ../../printerdrake.pm_.c:976 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: ../../printerdrake.pm_.c:977 msgid "Printer Server" msgstr "�������Ȣ ����¸�" #: ../../printerdrake.pm_.c:978 msgid "Print Queue Name" msgstr "�������Ȣ ����¢� ����" #: ../../printerdrake.pm_.c:983 msgid "NCP server name missing!" msgstr "" #: ../../printerdrake.pm_.c:987 msgid "NCP queue name missing!" msgstr "" #: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1074 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:1057 ../../printerdrake.pm_.c:1077 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:1097 msgid "TCP/Socket Printer Options" msgstr "" #: ../../printerdrake.pm_.c:1099 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" #: ../../printerdrake.pm_.c:1100 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: ../../printerdrake.pm_.c:1105 msgid "Printer host name or IP missing!" msgstr "" #: ../../printerdrake.pm_.c:1127 msgid "Printer host name or IP" msgstr "" #: ../../printerdrake.pm_.c:1177 ../../printerdrake.pm_.c:1179 msgid "Printer Device URI" msgstr "" #: ../../printerdrake.pm_.c:1178 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printerdrake.pm_.c:1193 msgid "A valid URI must be entered!" msgstr "" #: ../../printerdrake.pm_.c:1560 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printerdrake.pm_.c:1561 msgid "Name of printer" msgstr "" #: ../../printerdrake.pm_.c:1563 msgid "Location" msgstr "���" #: ../../printerdrake.pm_.c:1575 ../../printerdrake.pm_.c:1697 msgid "Reading printer database..." msgstr "��ͦ��Ȣ¢� ��� �����θ��� " #: ../../printerdrake.pm_.c:1579 msgid "Preparing printer database..." msgstr "��ͦ��Ȣ¢� ��� ��š���θ���" #: ../../printerdrake.pm_.c:1676 msgid "Your printer model" msgstr "��ͦ��Ȣ ����" #: ../../printerdrake.pm_.c:1677 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printerdrake.pm_.c:1682 ../../printerdrake.pm_.c:1685 msgid "The model is correct" msgstr "��ͦ��Ȣ¢� ���� �â" #: ../../printerdrake.pm_.c:1683 ../../printerdrake.pm_.c:1684 #: ../../printerdrake.pm_.c:1687 msgid "Select model manually" msgstr "��ͦ��Ȣ¢� ����� ��Ө�¡� ���� ���" #: ../../printerdrake.pm_.c:1704 msgid "Printer model selection" msgstr "��ͦ��Ȣ¢� ����� ����" #: ../../printerdrake.pm_.c:1705 msgid "Which printer model do you have?" msgstr "���� ��ͦ��Ȣ¢� ���� ��?" #: ../../printerdrake.pm_.c:1706 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" #: ../../printerdrake.pm_.c:1709 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printerdrake.pm_.c:1786 msgid "OKI winprinter configuration" msgstr "OKI ��ͦ��Ȣ¢� ��Ũ���" #: ../../printerdrake.pm_.c:1787 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1857 msgid "Lexmark inkjet configuration" msgstr "Lexmark ��ͦ��Ȣ¢� ��Ũ���" #: ../../printerdrake.pm_.c:1831 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printerdrake.pm_.c:1858 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printerdrake.pm_.c:1861 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printerdrake.pm_.c:1862 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printerdrake.pm_.c:2085 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printerdrake.pm_.c:2094 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printerdrake.pm_.c:2098 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printerdrake.pm_.c:2103 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printerdrake.pm_.c:2142 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../printerdrake.pm_.c:2165 msgid "Test pages" msgstr "������ �����" #: ../../printerdrake.pm_.c:2166 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printerdrake.pm_.c:2170 msgid "No test pages" msgstr "������ ����� �������" #: ../../printerdrake.pm_.c:2171 msgid "Print" msgstr "��" #: ../../printerdrake.pm_.c:2228 msgid "Standard test page" msgstr "����� ������ ���" #: ../../printerdrake.pm_.c:2231 msgid "Alternative test page (Letter)" msgstr "���� ������ ����� (�ʾ�)" #: ../../printerdrake.pm_.c:2234 msgid "Alternative test page (A4)" msgstr "���� ������ ����� (A4)" #: ../../printerdrake.pm_.c:2236 msgid "Photo test page" msgstr "�Ǣ�� ������ ���" #: ../../printerdrake.pm_.c:2240 msgid "Do not print any test page" msgstr "������ ���� ��� �����" #: ../../printerdrake.pm_.c:2249 ../../printerdrake.pm_.c:2402 msgid "Printing test page(s)..." msgstr "������ ����� ����θ���" #: ../../printerdrake.pm_.c:2274 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2278 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../printerdrake.pm_.c:2285 msgid "Did it work properly?" msgstr "" #: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:3473 msgid "Raw printer" msgstr "���� �������Ȣ " #: ../../printerdrake.pm_.c:2333 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " "\"kprinter <file>\". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printerdrake.pm_.c:2335 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2355 #: ../../printerdrake.pm_.c:2365 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s <file>\". " msgstr "" #: ../../printerdrake.pm_.c:2341 ../../printerdrake.pm_.c:2381 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2345 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2360 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "<file>\".\n" msgstr "" #: ../../printerdrake.pm_.c:2352 ../../printerdrake.pm_.c:2362 #: ../../printerdrake.pm_.c:2372 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2357 ../../printerdrake.pm_.c:2367 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printerdrake.pm_.c:2370 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "<file>\" or \"%s <file>\".\n" msgstr "" #: ../../printerdrake.pm_.c:2374 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printerdrake.pm_.c:2378 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s <file>\".\n" msgstr "" #: ../../printerdrake.pm_.c:2388 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2389 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2391 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2392 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2395 ../../printerdrake.pm_.c:2398 #: ../../printerdrake.pm_.c:2399 ../../printerdrake.pm_.c:2400 #: ../../printerdrake.pm_.c:3457 ../../standalone/drakTermServ_.c:248 #: ../../standalone/drakbackup_.c:1562 ../../standalone/drakbackup_.c:4210 #: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705 #: ../../standalone/drakfont_.c:1014 msgid "Close" msgstr "��" #: ../../printerdrake.pm_.c:2398 msgid "Print option list" msgstr "��� Ţ������" #: ../../printerdrake.pm_.c:2418 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printerdrake.pm_.c:2439 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printerdrake.pm_.c:2461 ../../printerdrake.pm_.c:2927 #: ../../printerdrake.pm_.c:3227 msgid "Reading printer data..." msgstr "��ͦ��Ȣ¢� ��� �����θ���... " #: ../../printerdrake.pm_.c:2481 ../../printerdrake.pm_.c:2509 #: ../../printerdrake.pm_.c:2544 msgid "Transfer printer configuration" msgstr "��ͦ��Ȣ¢� ��Ũ��� ������θ���" #: ../../printerdrake.pm_.c:2482 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printerdrake.pm_.c:2485 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printerdrake.pm_.c:2487 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2489 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2491 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2492 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2493 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printerdrake.pm_.c:2496 msgid "Do not transfer printers" msgstr "�������Ȣ��� ���� ����" #: ../../printerdrake.pm_.c:2497 ../../printerdrake.pm_.c:2514 msgid "Transfer" msgstr "����" #: ../../printerdrake.pm_.c:2510 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printerdrake.pm_.c:2518 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:2523 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printerdrake.pm_.c:2531 msgid "New printer name" msgstr "Ҿ�� �������Ȣ¢� ����" #: ../../printerdrake.pm_.c:2534 #, c-format msgid "Transferring %s..." msgstr "%s... ������θ���" #: ../../printerdrake.pm_.c:2545 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printerdrake.pm_.c:2555 msgid "Refreshing printer data..." msgstr "��ͦ��Ȣ¢� ��� ��������θ���..." #: ../../printerdrake.pm_.c:2563 ../../printerdrake.pm_.c:2638 #: ../../printerdrake.pm_.c:2650 msgid "Configuration of a remote printer" msgstr "������ �������Ȣ¢� ��Ũ���" #: ../../printerdrake.pm_.c:2564 msgid "Starting network..." msgstr "Ũ�¨��� �����θ���" #: ../../printerdrake.pm_.c:2599 ../../printerdrake.pm_.c:2603 #: ../../printerdrake.pm_.c:2605 msgid "Configure the network now" msgstr "Ũ�¨���� ��Ũ�����" #: ../../printerdrake.pm_.c:2600 msgid "Network functionality not configured" msgstr "Ũ�¨��� ��Ũ�����Ţ���" #: ../../printerdrake.pm_.c:2601 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printerdrake.pm_.c:2604 msgid "Go on without configuring the network" msgstr "" #: ../../printerdrake.pm_.c:2640 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printerdrake.pm_.c:2641 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printerdrake.pm_.c:2651 msgid "Restarting printing system..." msgstr "��ͦ��Ȣ �ڦ����� ������θ���..." #: ../../printerdrake.pm_.c:2689 msgid "high" msgstr "������" #: ../../printerdrake.pm_.c:2689 msgid "paranoid" msgstr "�� ��� " #: ../../printerdrake.pm_.c:2690 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printerdrake.pm_.c:2691 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printerdrake.pm_.c:2723 msgid "Starting the printing system at boot time" msgstr "" #: ../../printerdrake.pm_.c:2724 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printerdrake.pm_.c:2748 ../../printerdrake.pm_.c:2793 #: ../../printerdrake.pm_.c:2832 ../../printerdrake.pm_.c:2874 #: ../../printerdrake.pm_.c:2995 msgid "Checking installed software..." msgstr "" #: ../../printerdrake.pm_.c:2798 msgid "Removing LPRng..." msgstr "" #: ../../printerdrake.pm_.c:2837 msgid "Removing LPD..." msgstr "" #: ../../printerdrake.pm_.c:2910 msgid "Select Printer Spooler" msgstr "" #: ../../printerdrake.pm_.c:2911 msgid "Which printing system (spooler) do you want to use?" msgstr "����� �� ���� �����측� Ѩƨ� ���� �����ȣ���?" #: ../../printerdrake.pm_.c:2947 #, c-format msgid "Configuring printer \"%s\"..." msgstr "�������Ȣ ��Ũ����θ���... \"%s\"..." #: ../../printerdrake.pm_.c:2961 msgid "Installing Foomatic..." msgstr "" #: ../../printerdrake.pm_.c:3031 ../../printerdrake.pm_.c:3072 #: ../../printerdrake.pm_.c:3474 ../../printerdrake.pm_.c:3547 msgid "Printer options" msgstr "��ͦ��Ȣ Ţ������" #: ../../printerdrake.pm_.c:3041 msgid "Preparing Printerdrake..." msgstr "ʧ���� �����θ���..." #: ../../printerdrake.pm_.c:3059 ../../printerdrake.pm_.c:3637 msgid "Configuring applications..." msgstr "�����θ� ��Ũ����θ���..." #: ../../printerdrake.pm_.c:3079 msgid "Would you like to configure printing?" msgstr "" #: ../../printerdrake.pm_.c:3091 msgid "Printing system: " msgstr "��� ����: " #: ../../printerdrake.pm_.c:3151 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" #: ../../printerdrake.pm_.c:3152 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" #: ../../printerdrake.pm_.c:3179 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printerdrake.pm_.c:3197 msgid "Change the printing system" msgstr "" #: ../../printerdrake.pm_.c:3202 ../../standalone/drakconnect_.c:277 msgid "Normal Mode" msgstr "" #: ../../printerdrake.pm_.c:3367 ../../printerdrake.pm_.c:3417 #: ../../printerdrake.pm_.c:3630 msgid "Do you want to configure another printer?" msgstr "����� ���� �� �������Ȣ�� ��Ũ�� ������?" #: ../../printerdrake.pm_.c:3452 msgid "Modify printer configuration" msgstr "�������Ȣ�� ��Ũ��� ���Ȣ¨��" #: ../../printerdrake.pm_.c:3454 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../printerdrake.pm_.c:3458 msgid "Do it!" msgstr "����" #: ../../printerdrake.pm_.c:3463 ../../printerdrake.pm_.c:3518 msgid "Printer connection type" msgstr "�������Ȣ¢� ������ Ũ�: " #: ../../printerdrake.pm_.c:3464 ../../printerdrake.pm_.c:3522 msgid "Printer name, description, location" msgstr "�������Ȣ¢� ����, Ţ���, ���" #: ../../printerdrake.pm_.c:3466 ../../printerdrake.pm_.c:3540 msgid "Printer manufacturer, model, driver" msgstr "�������Ȣ¢� �¡â����â� ����, ����, ��� ����" #: ../../printerdrake.pm_.c:3467 ../../printerdrake.pm_.c:3541 msgid "Printer manufacturer, model" msgstr "�������Ȣ¢� �¡â����â� ����, ����" #: ../../printerdrake.pm_.c:3476 ../../printerdrake.pm_.c:3551 msgid "Set this printer as the default" msgstr "��������� �������Ȣ¡� ���" #: ../../printerdrake.pm_.c:3478 ../../printerdrake.pm_.c:3556 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "�������Ȣ�� �����θ� ���������" #: ../../printerdrake.pm_.c:3479 ../../printerdrake.pm_.c:3565 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "�������Ȣ�� �����θǢĢ��� �����" #: ../../printerdrake.pm_.c:3480 ../../printerdrake.pm_.c:3574 msgid "Print test pages" msgstr "������ ������ ��" #: ../../printerdrake.pm_.c:3481 ../../printerdrake.pm_.c:3576 msgid "Know how to use this printer" msgstr "�������Ȣ�� ���� ���������" #: ../../printerdrake.pm_.c:3483 ../../printerdrake.pm_.c:3578 msgid "Remove printer" msgstr "�������Ȣ�� ����" #: ../../printerdrake.pm_.c:3529 #, c-format msgid "Removing old printer \"%s\"..." msgstr "���� �������Ȣ �����θ��� \"%s\"..." #: ../../printerdrake.pm_.c:3554 msgid "Default printer" msgstr "��������� �������Ȣ" #: ../../printerdrake.pm_.c:3555 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr " \"%s\" ��������� �������Ȣ" #: ../../printerdrake.pm_.c:3559 ../../printerdrake.pm_.c:3562 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "�������Ȣ�� �����θ� ������ ������θ���" #: ../../printerdrake.pm_.c:3560 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "\"%s\" �������Ȣ �����θ� ������ ���Ȣ����� ��������" #: ../../printerdrake.pm_.c:3563 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "\"%s\" �������Ȣ �����θ� ������ ���� ���Ţ���" #: ../../printerdrake.pm_.c:3568 ../../printerdrake.pm_.c:3571 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "�������Ȣ�� �����θ� ������ �����θ���" #: ../../printerdrake.pm_.c:3569 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "\"%s\" �������Ȣ �����θǢĢ��� �������" #: ../../printerdrake.pm_.c:3572 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "\"%s\" �������Ȣ �����θǢĢ��� ��� ���Ţ���" #: ../../printerdrake.pm_.c:3580 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../printerdrake.pm_.c:3584 #, c-format msgid "Removing printer \"%s\"..." msgstr "��ͦ��Ȣ �����θ��� \"%s\"..." #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 msgid "Proxy configuration" msgstr "��ɡ�� ��Ũ���" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" "��ɡ�� ��Ũ��� ��Ţ�� �ո.\n" "\n" "��� ���� http ���� ftp ��ɡ���� ��Ũ�� �����\n" " ���� ���� ��ġ�� ���� ����\n" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" "��צ��� http ��ɡ���� ��Ũ�\n" "��ɡ�� ����ȡ� ���� �� ����" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 msgid "URL" msgstr "URL" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 msgid "port" msgstr "Ш�" #: ../../proxy.pm_.c:44 msgid "Url should begin with 'http:'" msgstr "URL ������� 'http:' Լ� ���� �����" #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 msgid "The port part should be numeric" msgstr "Ш� �� � ��� �����" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" "��צ��� ftp ��ɡ���� ��Ũ�\n" "��ɡ�� ����ȡ� ���� �� ����" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" "��צ��� ��ɡ��¢� ��������/������� ����\n" "����ȡ� ���� �� ����" #: ../../proxy.pm_.c:80 msgid "login" msgstr "��������" #: ../../proxy.pm_.c:82 msgid "password" msgstr "����� " #: ../../proxy.pm_.c:84 msgid "re-type password" msgstr "���� ������� ����� ��Ǣ���" #: ../../proxy.pm_.c:88 msgid "The passwords don't match. Try again!" msgstr "������� ����� ��ȡ� ���� " #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Ÿ�� _formatted_ RAID md%d ��� ���� ���Ţ���" #: ../../raid.pm_.c:108 #, c-format msgid "Can't write file %s" msgstr "%s ������� �ؾ ���Ţ���" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid ����ި���" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid ����ި���(raidtools ����� ����¡?)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "%d ��� RAID ������ ������� Ÿ�� ����\n" #: ../../security/main.pm_.c:35 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" #: ../../security/main.pm_.c:65 #, fuzzy msgid "Security Level:" msgstr "��и��� ����" #: ../../security/main.pm_.c:99 #, fuzzy msgid "Security Alerts:" msgstr "��и��� ����" #: ../../security/main.pm_.c:101 #, fuzzy msgid "Security Administrator:" msgstr "��и��� ��ġ��(���� ���� ������ Ӹ�â)" #: ../../security/main.pm_.c:114 #, fuzzy msgid "Network Options" msgstr "Ţ������" #: ../../security/main.pm_.c:114 #, fuzzy msgid "System Options" msgstr "Ţ������" #: ../../security/main.pm_.c:119 ../../security/main.pm_.c:148 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" #: ../../security/main.pm_.c:137 #, fuzzy, c-format msgid " (default: %s)" msgstr " (���������)" #: ../../security/main.pm_.c:161 msgid "Periodic Checks 2" msgstr "" #: ../../security/main.pm_.c:162 msgid "Periodic Checks" msgstr "" #: ../../security/main.pm_.c:176 #, fuzzy msgid "Please wait, setting security level..." msgstr "������ ����¡� ��и��� ���Ĩ�� ����� ������" #: ../../security/main.pm_.c:182 #, fuzzy msgid "Please wait, setting security options..." msgstr "��צ��� �������..���� ��������������" #: ../../services.pm_.c:14 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "���� �Ģ¨��� ���� ����" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "Anacron ��ɢ�� ���� ��ġ��" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:26 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:28 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../services.pm_.c:29 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:33 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:35 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:38 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:40 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:41 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:43 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:45 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:47 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: ../../services.pm_.c:48 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:50 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm_.c:52 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:55 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:57 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:59 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:60 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:63 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:66 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../services.pm_.c:67 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:69 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:71 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:74 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:76 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:78 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:80 msgid "Launch the sound system on your machine" msgstr "" #: ../../services.pm_.c:81 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:83 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:84 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../services.pm_.c:110 ../../services.pm_.c:152 msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../services.pm_.c:122 msgid "Printing" msgstr "��� ��ġ��" #: ../../services.pm_.c:123 msgid "Internet" msgstr "�����" #: ../../services.pm_.c:126 msgid "File sharing" msgstr "����� ������" #: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1746 msgid "System" msgstr "����� �����" #: ../../services.pm_.c:133 msgid "Remote Administration" msgstr "������ ��ġ��" #: ../../services.pm_.c:141 msgid "Database Server" msgstr "����� �Ũ�¸�" #: ../../services.pm_.c:170 #, c-format msgid "Services: %d activated for %d registered" msgstr "���Ÿ�: %d ���š� %d ����������� " #: ../../services.pm_.c:186 msgid "Services" msgstr "���Ÿ�" #: ../../services.pm_.c:198 msgid "running" msgstr "���̸���" #: ../../services.pm_.c:198 msgid "stopped" msgstr "��������" #: ../../services.pm_.c:212 msgid "Services and deamons" msgstr "���Ÿ�� ���Ģ���" #: ../../services.pm_.c:217 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "��� Ţ��� �������\n" "��ɢ���" #: ../../services.pm_.c:224 msgid "On boot" msgstr "�����̾Ģ� ����" #: ../../services.pm_.c:236 msgid "Start" msgstr "����" #: ../../services.pm_.c:236 msgid "Stop" msgstr "�����" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "���ʧ�� Ģ�� 9.0 ���� ������� ��Ȣ" #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "���� �Ŀ��� ����� �ո" #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" "���ʧ�� ��ը�� ������� ������ ����츢��. ��� ����� �������ž�� ������ �� ��" "�� �Ŀ��� �ĸ�� ������� ���ȣ���" #: ../../share/advertising/02-community.pl_.c:9 msgid "Get involved in the Free Software world" msgstr ";�� �������� �ĸ�� ������ š����" #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "���� �Ŀ��� �Ĩ� ��Ȣ �Ȣ� Ţ�����?" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" "���� ������� ������� ������ Ũ�¢� ������, \"Community\" ���¾����� š����" #: ../../share/advertising/03-internet.pl_.c:9 msgid "Get the most from the Internet" msgstr "����� ��ȡ� ��������" #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" "���ʧ�� Ģ�� 9.0 ������ ������ �� ����� ������� ��������. �����ġ, �������� " "���� ���ġʸ��, g������ K������ ������ڼ� �ո���" #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "���� Ũ�Ţ�� ���� ��漸 ��Ţ��� ��������" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "��漸� ��� ����째 ����� �������" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" "���ʧ�� Ģ�� 9.0 ������ ����� ���, ������ ��š�, �����,��Ũ�� �Ǣ" "������ ���� �� �����ټ� �ո���" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "Ţ��¡����" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "���ʧ�� Ģ�� 9.0 ������ ���� Ţ��¡���ټ� �ո���" #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:69 msgid "Mandrake Control Center" msgstr "���ʧ�� ������� ����" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "���ʧ�� Ģ�� 9.0 ������ ���� ��Ũ��� ��Ţ��� �ո���" #: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "���� ��ġ��" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" "���ʧ�� Ģ�� 9.0 ������ ���� 11 ���� ��ġ���ټ� K�����, G�����, ������ڼ� " "�ո���." #: ../../share/advertising/08-development.pl_.c:9 msgid "Development simplified" msgstr "��š�� �Ǣ����������" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "���ʧ�� Ģ�� 9.0 ������ ���� ��š� �������� ��������" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "GNU gcc 3 Լ� ���ʧ�� Ģ�� 9.0 ������ �ո���" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "���� ������� �� ��Ҿ��� ����¸��� �������" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "���� ������� �� ��Ҿ��� ����¸��� ���� �Ǣ� ��¡Ţ�ټ� ������ �ո���" #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "���� ��и���측�" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:9 msgid "Become a MandrakeExpert" msgstr "���ʧ�� Ţ�á���" #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 #, fuzzy msgid "MandrakeExpert Corporate" msgstr "���ʧ������" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" #: ../../standalone.pm_.c:49 msgid "Installing packages..." msgstr "�������� ������θ���..." #: ../../standalone/XFdrake_.c:148 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../standalone/XFdrake_.c:152 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../../standalone/drakTermServ_.c:188 msgid "Mandrake Terminal Server Configuration" msgstr "�â��Ȣ ��Ũ���" #: ../../standalone/drakTermServ_.c:203 msgid "Enable Server" msgstr "����¸� ��������" #: ../../standalone/drakTermServ_.c:210 msgid "Disable Server" msgstr "����¸� Ӽ����" #: ../../standalone/drakTermServ_.c:218 msgid "Start Server" msgstr "����¸� ����" #: ../../standalone/drakTermServ_.c:225 msgid "Stop Server" msgstr "����¸� �����" #: ../../standalone/drakTermServ_.c:233 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:235 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:239 msgid "Add/Del Users" msgstr "��ɨ�� ���/����" #: ../../standalone/drakTermServ_.c:241 msgid "Add/Del Clients" msgstr "���ʸ�� ���/����" #: ../../standalone/drakTermServ_.c:436 msgid "Boot Floppy" msgstr "����� ���" #: ../../standalone/drakTermServ_.c:438 msgid "Boot ISO" msgstr "����� ISO" #: ../../standalone/drakTermServ_.c:507 msgid "Build Whole Kernel -->" msgstr "�� �ըŨ��� ��š�� -->" #: ../../standalone/drakTermServ_.c:509 ../../standalone/drakTermServ_.c:539 msgid "This will take a few minutes." msgstr "��צ��� �������." #: ../../standalone/drakTermServ_.c:521 msgid "No kernel selected!" msgstr "�� ���� �������Ţ���" #: ../../standalone/drakTermServ_.c:524 msgid "Build Single NIC -->" msgstr "�� Ũ�¨��� �𨼨� ���� ��š�� -->" #: ../../standalone/drakTermServ_.c:535 msgid "No nic selected!" msgstr "Ũ�¨��� �� ���� �������Ţ���" #: ../../standalone/drakTermServ_.c:538 msgid "Build All Kernels -->" msgstr "����� �ըŨ��� ��š�� -->" #: ../../standalone/drakTermServ_.c:552 msgid "<-- Delete" msgstr "<-- ����" #: ../../standalone/drakTermServ_.c:559 msgid "Delete All NBIs" msgstr "NBIs ������ ����" #: ../../standalone/drakTermServ_.c:621 msgid "Add User -->" msgstr "��ɨ�� ��� -->" #: ../../standalone/drakTermServ_.c:629 msgid "<-- Del User" msgstr "<-- ��ɨ� ����" #: ../../standalone/drakTermServ_.c:694 msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ_.c:710 msgid "Add Client -->" msgstr "���ʨ� ��� -->" #: ../../standalone/drakTermServ_.c:742 msgid "<-- Del Client" msgstr "<-- ���ʨ� ����" #: ../../standalone/drakTermServ_.c:748 msgid "dhcpd Config..." msgstr "dhcpd ��Ũ����" #: ../../standalone/drakTermServ_.c:873 #, fuzzy msgid "dhcpd Server Configuration" msgstr "Ũ�¨����� ��Ũ���" #: ../../standalone/drakTermServ_.c:874 msgid "" "Most of these values were extracted\n" "from your running system. You can modify as needed." msgstr "" #: ../../standalone/drakTermServ_.c:875 #, fuzzy msgid "Write Config" msgstr "��Ũ���" #: ../../standalone/drakTermServ_.c:965 msgid "Please insert floppy disk:" msgstr "" #: ../../standalone/drakTermServ_.c:969 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:971 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:974 msgid "No floppy drive available!" msgstr "" #: ../../standalone/drakTermServ_.c:983 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ_.c:985 msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ_.c:1004 msgid "Need to create /etc/dhcpd.conf first!" msgstr " /etc/dhcpd.conf ��� ����� ӾĢ� ��š���������" #: ../../standalone/drakautoinst_.c:43 msgid "Error!" msgstr "����!" #: ../../standalone/drakautoinst_.c:44 #, c-format msgid "I can't find needed image file `%s'." msgstr " `%s ��� ������ ������� ���Ţ���" #: ../../standalone/drakautoinst_.c:46 msgid "Auto Install Configurator" msgstr "�������측� ��Ũ������" #: ../../standalone/drakautoinst_.c:47 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "�������측� ��Ũ���. �� Ţ���� ��Χ� ��������. ����� ����� Ţ��Ҹ�ȣ��ǡ?" #: ../../standalone/drakautoinst_.c:69 #, fuzzy msgid "Automatic Steps Configuration" msgstr "��ɢ�� ��Ũ���" #: ../../standalone/drakautoinst_.c:70 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "���š� ����¢�� ������ ���Ţ� Ţ��� ���� ������, ���� ��Ө�¡� ���� ������" #: ../../standalone/drakautoinst_.c:81 ../../standalone/drakautoinst_.c:82 msgid "Creating auto install floppy" msgstr "�������측� ��� ��� ��š���θ���" #: ../../standalone/drakautoinst_.c:144 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "�ո\n" "\n" "�������측� ������ ������ ����" #: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:508 #: ../../standalone/scannerdrake_.c:119 msgid "Congratulations!" msgstr "š�����!" #: ../../standalone/drakautoinst_.c:240 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst_.c:278 msgid "Auto Install" msgstr "�������" #: ../../standalone/drakautoinst_.c:348 msgid "Add an item" msgstr "����ʨ� ���" #: ../../standalone/drakautoinst_.c:355 msgid "Remove the last item" msgstr "����� ����ʨ� ����" #: ../../standalone/drakbackup_.c:617 msgid "Cron not available yet as non-root" msgstr "Cron ���š��¡��� ������" #: ../../standalone/drakbackup_.c:723 msgid "WARNING" msgstr "��â쨸" #: ../../standalone/drakbackup_.c:724 msgid "FATAL" msgstr "�Ψ�¡� ����" #: ../../standalone/drakbackup_.c:725 msgid "INFO" msgstr "����" #: ../../standalone/drakbackup_.c:737 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:738 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:742 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:763 ../../standalone/drakbackup_.c:836 #: ../../standalone/drakbackup_.c:891 msgid "Total progess" msgstr "" #: ../../standalone/drakbackup_.c:818 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup_.c:827 msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup_.c:834 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup_.c:851 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup_.c:852 #, fuzzy, c-format msgid "Bad password on %s" msgstr "����� �������" #: ../../standalone/drakbackup_.c:853 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup_.c:854 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "��� ���� ���Ţ���%s: %s\n" #: ../../standalone/drakbackup_.c:857 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup_.c:861 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup_.c:905 msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup_.c:909 msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup_.c:930 msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup_.c:934 msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup_.c:938 msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup_.c:977 msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup_.c:1062 msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup_.c:1089 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup_.c:1201 ../../standalone/drakbackup_.c:1250 msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup_.c:1251 ../../standalone/drakbackup_.c:1318 msgid "Hard Disk Backup files..." msgstr "" #: ../../standalone/drakbackup_.c:1263 msgid "Backup User files..." msgstr "" #: ../../standalone/drakbackup_.c:1264 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:1317 msgid "Backup Other files..." msgstr "" #: ../../standalone/drakbackup_.c:1323 msgid "No changes to backup!" msgstr "" #: ../../standalone/drakbackup_.c:1339 ../../standalone/drakbackup_.c:1362 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1346 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:1349 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1367 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1372 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1381 msgid " Error during mail sending. \n" msgstr "" #: ../../standalone/drakbackup_.c:1406 msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup_.c:1519 ../../standalone/drakbackup_.c:1530 #: ../../standalone/drakfont_.c:1004 #, fuzzy msgid "File Selection" msgstr "����" #: ../../standalone/drakbackup_.c:1558 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:1602 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:1603 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:1604 msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../standalone/drakbackup_.c:1605 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1606 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:1607 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:1624 msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/drakbackup_.c:1651 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:1652 ../../standalone/drakbackup_.c:1676 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1674 ../../standalone/drakfont_.c:1058 #, fuzzy msgid "Remove Selected" msgstr "Ѩ�Ţ�� ����" #: ../../standalone/drakbackup_.c:1712 msgid "Windows (FAT32)" msgstr "" #: ../../standalone/drakbackup_.c:1751 msgid "Users" msgstr "������" #: ../../standalone/drakbackup_.c:1777 msgid "Use network connection to backup" msgstr "" #: ../../standalone/drakbackup_.c:1779 msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup_.c:1783 msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1784 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1785 msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup_.c:1786 msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup_.c:1790 msgid "Please enter the host name or IP." msgstr "" #: ../../standalone/drakbackup_.c:1795 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:1800 #, fuzzy msgid "Please enter your login" msgstr "����� ������� ������" #: ../../standalone/drakbackup_.c:1805 #, fuzzy msgid "Please enter your password" msgstr "���� ������� ������" #: ../../standalone/drakbackup_.c:1811 msgid "Remember this password" msgstr "" #: ../../standalone/drakbackup_.c:1822 msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup_.c:1917 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1920 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup_.c:1925 #, fuzzy msgid "Please choose your CD/DVD media size (Mb)" msgstr "��צ��� ���� Ţ����Ĩ� �� ������ ���� ����" #: ../../standalone/drakbackup_.c:1931 msgid "Please check for multisession CD" msgstr "" #: ../../standalone/drakbackup_.c:1937 msgid "Please check if you are using CDRW media" msgstr "" #: ../../standalone/drakbackup_.c:1943 msgid "Please check if you want to erase your RW media (1st Session)" msgstr "" #: ../../standalone/drakbackup_.c:1944 msgid " Erase Now " msgstr "" #: ../../standalone/drakbackup_.c:1950 msgid "Please check if you are using a DVDR device" msgstr "" #: ../../standalone/drakbackup_.c:1956 msgid "Please check if you are using a DVDRAM device" msgstr "" #: ../../standalone/drakbackup_.c:1969 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:2002 msgid "No CD device defined!" msgstr "" #: ../../standalone/drakbackup_.c:2050 msgid "Use tape to backup" msgstr "" #: ../../standalone/drakbackup_.c:2053 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:2059 msgid "Please check if you want to use the non-rewinding device." msgstr "" #: ../../standalone/drakbackup_.c:2065 msgid "Please check if you want to erase your tape before the backup." msgstr "" #: ../../standalone/drakbackup_.c:2071 msgid "Please check if you want to eject your tape after the backup." msgstr "" #: ../../standalone/drakbackup_.c:2077 ../../standalone/drakbackup_.c:2151 #: ../../standalone/drakbackup_.c:3118 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:2142 msgid "Please enter the directory to save to:" msgstr "" #: ../../standalone/drakbackup_.c:2157 ../../standalone/drakbackup_.c:3124 msgid "Use quota for backup files." msgstr "" #: ../../standalone/drakbackup_.c:2223 msgid "Network" msgstr "Ũ�¨���" #: ../../standalone/drakbackup_.c:2228 msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup_.c:2233 msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup_.c:2238 #, fuzzy msgid "Tape" msgstr "Ũ�:" #: ../../standalone/drakbackup_.c:2252 ../../standalone/drakbackup_.c:2256 #: ../../standalone/drakbackup_.c:2260 msgid "hourly" msgstr "" #: ../../standalone/drakbackup_.c:2253 ../../standalone/drakbackup_.c:2257 #: ../../standalone/drakbackup_.c:2260 #, fuzzy msgid "daily" msgstr "������" #: ../../standalone/drakbackup_.c:2254 ../../standalone/drakbackup_.c:2258 #: ../../standalone/drakbackup_.c:2260 msgid "weekly" msgstr "" #: ../../standalone/drakbackup_.c:2255 ../../standalone/drakbackup_.c:2259 #: ../../standalone/drakbackup_.c:2260 msgid "monthly" msgstr "" #: ../../standalone/drakbackup_.c:2273 #, fuzzy msgid "Use daemon" msgstr "ʧ������" #: ../../standalone/drakbackup_.c:2278 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" #: ../../standalone/drakbackup_.c:2284 #, fuzzy msgid "" "Please choose the\n" "media for backup." msgstr "��צ���, ���� �Ģ¢� Ũ���� ����� �������" #: ../../standalone/drakbackup_.c:2291 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup_.c:2328 msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup_.c:2334 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup_.c:2373 #, fuzzy msgid "What" msgstr "���Ш�����" #: ../../standalone/drakbackup_.c:2378 #, fuzzy msgid "Where" msgstr "������" #: ../../standalone/drakbackup_.c:2383 #, fuzzy msgid "When" msgstr "���Ш�����" #: ../../standalone/drakbackup_.c:2388 #, fuzzy msgid "More Options" msgstr "Ţ������" #: ../../standalone/drakbackup_.c:2407 ../../standalone/drakbackup_.c:4532 #, fuzzy msgid "Drakbackup Configuration" msgstr "���� ��Ũ���" #: ../../standalone/drakbackup_.c:2425 #, fuzzy msgid "Please choose where you want to backup" msgstr "��צ���, ���� �Ģ¢� Ũ���� ����� �������" #: ../../standalone/drakbackup_.c:2427 #, fuzzy msgid "on Hard Drive" msgstr "ʧ���������" #: ../../standalone/drakbackup_.c:2437 #, fuzzy msgid "across Network" msgstr "Ũ�¨���" #: ../../standalone/drakbackup_.c:2447 #, fuzzy msgid "on CDROM" msgstr "��ʲ���/����" #: ../../standalone/drakbackup_.c:2455 msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup_.c:2498 #, fuzzy msgid "Please choose what you want to backup" msgstr "����� ������ Ţ���� ���Ƣ��� ����� ������" #: ../../standalone/drakbackup_.c:2499 #, fuzzy msgid "Backup system" msgstr "��������" #: ../../standalone/drakbackup_.c:2500 #, fuzzy msgid "Backup Users" msgstr "��������" #: ../../standalone/drakbackup_.c:2503 #, fuzzy msgid "Select user manually" msgstr "���Ģ� ���" #: ../../standalone/drakbackup_.c:2586 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:2587 #, fuzzy msgid "" "\n" "- System Files:\n" msgstr "���� ����" #: ../../standalone/drakbackup_.c:2589 #, fuzzy msgid "" "\n" "- User Files:\n" msgstr "���� ����" #: ../../standalone/drakbackup_.c:2591 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2593 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2596 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup_.c:2602 msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup_.c:2603 #, fuzzy msgid "RW" msgstr "R" #: ../../standalone/drakbackup_.c:2604 #, fuzzy, c-format msgid " on device: %s" msgstr "�Ģ¢� Ũ�: %s\n" #: ../../standalone/drakbackup_.c:2605 msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup_.c:2606 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup_.c:2607 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup_.c:2610 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2611 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:2612 #, fuzzy msgid "" "\n" "- Options:\n" msgstr "Ţ������" #: ../../standalone/drakbackup_.c:2613 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:2616 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:2618 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:2621 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup_.c:2622 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:2623 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:2624 msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup_.c:2625 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:2626 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:2627 msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup_.c:2628 msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup_.c:2630 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:2636 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2803 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2805 msgid "Please uncheck or remove it on next time." msgstr "" #: ../../standalone/drakbackup_.c:2815 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:2836 msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup_.c:2837 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:2955 msgid " Restore Configuration " msgstr "" #: ../../standalone/drakbackup_.c:2973 msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup_.c:2990 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:3068 msgid "Backup the system files before:" msgstr "" #: ../../standalone/drakbackup_.c:3070 #, fuzzy msgid "please choose the date to restore" msgstr "��צ���, ���� �Ģ¢� Ũ���� ����� �������" #: ../../standalone/drakbackup_.c:3107 msgid "Use Hard Disk to backup" msgstr "" #: ../../standalone/drakbackup_.c:3110 #, fuzzy msgid "Please enter the directory to save:" msgstr "������ ����¡� ��и��� ���Ĩ�� ����� ������" #: ../../standalone/drakbackup_.c:3153 #, fuzzy msgid "FTP Connection" msgstr "������ Ũ�: " #: ../../standalone/drakbackup_.c:3160 #, fuzzy msgid "Secure Connection" msgstr "����� ������ �â��Ȣ" #: ../../standalone/drakbackup_.c:3186 msgid "Restore from Hard Disk." msgstr "" #: ../../standalone/drakbackup_.c:3188 msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup_.c:3256 msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbackup_.c:3258 #, fuzzy msgid "Other Media" msgstr "���â��" #: ../../standalone/drakbackup_.c:3263 #, fuzzy msgid "Restore system" msgstr "���� �������" #: ../../standalone/drakbackup_.c:3264 msgid "Restore Users" msgstr "" #: ../../standalone/drakbackup_.c:3265 #, fuzzy msgid "Restore Other" msgstr "�ڦ�����" #: ../../standalone/drakbackup_.c:3267 msgid "select path to restore (instead of /)" msgstr "" #: ../../standalone/drakbackup_.c:3271 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:3273 msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup_.c:3386 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup_.c:3396 #, fuzzy msgid "" "Restore Selected\n" "Files" msgstr "Ѩ�Ţ�� ����" #: ../../standalone/drakbackup_.c:3413 #, fuzzy msgid "" "Change\n" "Restore Path" msgstr "�ڦ�����" #: ../../standalone/drakbackup_.c:3479 #, fuzzy, c-format msgid "Backup files not found at %s." msgstr "%s ����� %s.old �� ������" #: ../../standalone/drakbackup_.c:3492 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup_.c:3492 #, fuzzy msgid "Restore From CD" msgstr "RAID ���� ����" #: ../../standalone/drakbackup_.c:3494 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3504 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup_.c:3504 #, fuzzy msgid "Restore From Tape" msgstr "���� Ÿ�� ����Ҹ�� ���� ������ ����� š����" #: ../../standalone/drakbackup_.c:3506 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3526 #, fuzzy msgid "Restore Via Network" msgstr "�ڦ�����" #: ../../standalone/drakbackup_.c:3526 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup_.c:3527 #, fuzzy msgid "Host Name" msgstr "����������: " #: ../../standalone/drakbackup_.c:3528 msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup_.c:3535 #, fuzzy msgid "Password required" msgstr "�����" #: ../../standalone/drakbackup_.c:3541 #, fuzzy msgid "Username required" msgstr "��������" #: ../../standalone/drakbackup_.c:3544 #, fuzzy msgid "Hostname required" msgstr "�����¢�����: " #: ../../standalone/drakbackup_.c:3549 msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup_.c:3562 msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup_.c:3565 #, fuzzy msgid "Restore Failed..." msgstr "�ڦ�����" #: ../../standalone/drakbackup_.c:3803 msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup_.c:3812 #, fuzzy msgid "Custom Restore" msgstr "�ɢ���ɡ��" #: ../../standalone/drakbackup_.c:3858 msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup_.c:3864 msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup_.c:3867 #, fuzzy msgid "Restore From Catalog" msgstr "���� Ÿ�� ����Ҹ�� ���� ������ ����� š����" #: ../../standalone/drakbackup_.c:3895 #, fuzzy msgid "Restore Progress" msgstr "���� Ÿ�� ����Ҹ�� ���� ������ ����� š����" #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3970 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4023 #: ../../standalone/drakbackup_.c:4050 ../../standalone/drakbackup_.c:4110 #: ../../standalone/drakbackup_.c:4137 ../../standalone/drakbackup_.c:4167 #: ../../standalone/drakbackup_.c:4193 msgid "Previous" msgstr "" #: ../../standalone/drakbackup_.c:3941 ../../standalone/drakbackup_.c:4027 #: ../../standalone/logdrake_.c:224 msgid "Save" msgstr "����" #: ../../standalone/drakbackup_.c:4000 #, fuzzy msgid "Build Backup" msgstr "��������" #: ../../standalone/drakbackup_.c:4054 ../../standalone/drakbackup_.c:4634 #, fuzzy msgid "Restore" msgstr "�ڦ�����" #: ../../standalone/drakbackup_.c:4233 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:4257 #, fuzzy msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "%s ��� ����� ������������.��Ҿ� ����?" #: ../../standalone/drakbackup_.c:4280 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:4303 msgid "Please select data to restore..." msgstr "" #: ../../standalone/drakbackup_.c:4324 msgid "Please select media for backup..." msgstr "" #: ../../standalone/drakbackup_.c:4346 msgid "Please select data to backup..." msgstr "" #: ../../standalone/drakbackup_.c:4368 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:4389 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:4470 msgid "Backup system files" msgstr "" #: ../../standalone/drakbackup_.c:4472 msgid "Backup user files" msgstr "" #: ../../standalone/drakbackup_.c:4474 msgid "Backup other files" msgstr "" #: ../../standalone/drakbackup_.c:4476 ../../standalone/drakbackup_.c:4509 msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup_.c:4500 msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup_.c:4504 #, fuzzy msgid "Sending files..." msgstr "����Ҹ��� ������ " #: ../../standalone/drakbackup_.c:4590 #, fuzzy msgid "Backup Now from configuration file" msgstr "Ţ��� ����,�������� ��ո� ��Ũ�����" #: ../../standalone/drakbackup_.c:4595 #, fuzzy msgid "View Backup Configuration." msgstr "k������ ��Ũ���" #: ../../standalone/drakbackup_.c:4616 #, fuzzy msgid "Wizard Configuration" msgstr "��� ��Ũ���" #: ../../standalone/drakbackup_.c:4621 #, fuzzy msgid "Advanced Configuration" msgstr "Ũ�¨����� ��Ũ���" #: ../../standalone/drakbackup_.c:4626 #, fuzzy msgid "Backup Now" msgstr "��������" #: ../../standalone/drakbackup_.c:4660 #, fuzzy msgid "Drakbackup" msgstr "��������" #: ../../standalone/drakbackup_.c:4711 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4741 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4749 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4788 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4814 ../../standalone/drakbackup_.c:4891 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>" msgstr "" #: ../../standalone/drakbackup_.c:4816 ../../standalone/drakbackup_.c:4893 msgid "" " updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>" msgstr "" #: ../../standalone/drakbackup_.c:4818 ../../standalone/drakbackup_.c:4895 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: ../../standalone/drakbackup_.c:4832 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4870 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4879 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup_.c:4909 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, Drakbackup will remove\n" " your original directory and verify that all\n" " backup files are not corrupted. It is recommended\n" " you do a last backup before restoring.\n" " \n" "\n" msgstr "" #: ../../standalone/drakboot_.c:57 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "" #: ../../standalone/drakbug_.c:40 #, c-format msgid "" "drakbug version %s\n" "Copyright (C) 2002 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "usage: drakbug [OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" msgstr "" #: ../../standalone/drakbug_.c:47 msgid " --help - print this help message.\n" msgstr "" #: ../../standalone/drakbug_.c:48 msgid " --report - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:49 msgid " --incident - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:64 msgid "Mandrake Bug Report Tool" msgstr "ʧ������ �ȢŢ����� ��Ţ" #: ../../standalone/drakbug_.c:70 msgid "First Time Wizard" msgstr "ʧ������ " #: ../../standalone/drakbug_.c:71 msgid "Synchronization tool" msgstr "���� ��Ţ��" #: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:86 #: ../../standalone/drakbug_.c:156 ../../standalone/drakbug_.c:158 #: ../../standalone/drakbug_.c:162 msgid "Standalone Tools" msgstr "��� ��Ţ��" #: ../../standalone/drakbug_.c:73 msgid "HardDrake" msgstr "ʧ���������" #: ../../standalone/drakbug_.c:74 msgid "Mandrake Online" msgstr "���ʧ������" #: ../../standalone/drakbug_.c:75 msgid "Menudrake" msgstr "ʧ�����" #: ../../standalone/drakbug_.c:76 msgid "Msec" msgstr "ʧ����и���" #: ../../standalone/drakbug_.c:77 msgid "Remote Control" msgstr "ʧ�즾���������" #: ../../standalone/drakbug_.c:78 msgid "Software Manager" msgstr "ʧ������" #: ../../standalone/drakbug_.c:79 msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbug_.c:80 msgid "Windows Migration tool" msgstr "ʧ��Ţ����Ȣ" #: ../../standalone/drakbug_.c:81 msgid "Userdrake" msgstr "ʧ������" #: ../../standalone/drakbug_.c:82 msgid "Configuration Wizards" msgstr "ʧ����¡Ţ��" #: ../../standalone/drakbug_.c:97 msgid "Application:" msgstr "����: " #: ../../standalone/drakbug_.c:98 msgid "Package: " msgstr "�����: " #: ../../standalone/drakbug_.c:99 msgid "Kernel:" msgstr "��: " #: ../../standalone/drakbug_.c:100 msgid "Release: " msgstr "��Ǣ£�: " #: ../../standalone/drakbug_.c:115 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" "\n" "\n" "���� �ȢŢ�����\n" #: ../../standalone/drakbug_.c:134 msgid "Report" msgstr "�Ȣ쨸" #: ../../standalone/drakbug_.c:171 msgid "Not installed" msgstr "�������Ţ���" #: ../../standalone/drakbug_.c:189 msgid "connecting to Bugzilla wizard ..." msgstr "�캢ġ�š� �������" #: ../../standalone/drakbug_.c:196 msgid "No browser available! Please install one" msgstr "���ġ� �������.��צ��� ������" #: ../../standalone/drakconnect_.c:79 #, c-format msgid "Network configuration (%d adapters)" msgstr "Ũ�¨������ ��Ũ��� (%d �𨼸�)" #: ../../standalone/drakconnect_.c:86 ../../standalone/drakconnect_.c:594 msgid "Profile: " msgstr "�����Ȣ��: " #: ../../standalone/drakconnect_.c:94 msgid "Del profile..." msgstr "�����Ȣ��� ����: " #: ../../standalone/drakconnect_.c:100 msgid "Profile to delete:" msgstr "��� ����� �����Ȣ��:" #: ../../standalone/drakconnect_.c:128 msgid "New profile..." msgstr "Ҿ�� �����Ȣ�� " #: ../../standalone/drakconnect_.c:134 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr ":Ҿ�� �����Ȣ���� ���� (�������Ǩ� ��� �����) " #: ../../standalone/drakconnect_.c:160 msgid "Hostname: " msgstr "�����¢�����: " #: ../../standalone/drakconnect_.c:167 msgid "Internet access" msgstr "�������" #: ../../standalone/drakconnect_.c:180 msgid "Type:" msgstr "Ũ�:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Gateway:" msgstr "Ѩ�š¢�:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Interface:" msgstr "��:" #: ../../standalone/drakconnect_.c:194 msgid "Status:" msgstr "����:" #: ../../standalone/drakconnect_.c:201 msgid "Wait please" msgstr "��צ��� �������..." #: ../../standalone/drakconnect_.c:219 msgid "Configure Internet Access..." msgstr "�������� ��Ũ����..." #: ../../standalone/drakconnect_.c:226 ../../standalone/drakconnect_.c:448 msgid "LAN configuration" msgstr "LAN ��Ũ���.." #: ../../standalone/drakconnect_.c:231 msgid "Driver" msgstr "��츿���" #: ../../standalone/drakconnect_.c:231 msgid "Interface" msgstr "��" #: ../../standalone/drakconnect_.c:231 msgid "Protocol" msgstr "Ũ�Ө�" #: ../../standalone/drakconnect_.c:231 msgid "State" msgstr "����" #: ../../standalone/drakconnect_.c:243 msgid "Configure Local Area Network..." msgstr "LAN-� ��Ũ����..." #: ../../standalone/drakconnect_.c:255 msgid "Click here to launch the wizard ->" msgstr "��¡Ţ��� ��� ��� ��Ǣ� ���� ->" #: ../../standalone/drakconnect_.c:256 msgid "Wizard..." msgstr "��¡Ţ..." #: ../../standalone/drakconnect_.c:282 msgid "Apply" msgstr "��������" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Connected" msgstr "����������" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Not connected" msgstr "�������Ţ���" #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Connect..." msgstr "���..." #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Disconnect..." msgstr "������Ģ��� Ţ���" #: ../../standalone/drakconnect_.c:403 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "��â쨸, ��ڦ��� ������� ��������������. �� ������� ���� " "Ũ�¨������ ������ġ�" #: ../../standalone/drakconnect_.c:430 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Ũ�¨��� �𨼸� ���� ��Ũ�����Ţ���.\n" "��Ũ�� ��Ũ� ��� ���� ��Ǣ� ������" #: ../../standalone/drakconnect_.c:452 msgid "LAN Configuration" msgstr "Ũ�¨����� ��Ũ���" #: ../../standalone/drakconnect_.c:463 #, c-format msgid "Adapter %s: %s" msgstr "Ũ�¨��� �� %s: %s" #: ../../standalone/drakconnect_.c:469 msgid "Boot Protocol" msgstr "������ Ũ�Ө�" #: ../../standalone/drakconnect_.c:470 msgid "Started on boot" msgstr "������������ ��츢Ţ�" #: ../../standalone/drakconnect_.c:471 msgid "DHCP client" msgstr "DHCP ����" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 msgid "activate now" msgstr "������ ����" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 msgid "deactivate now" msgstr "������ �����" #: ../../standalone/drakconnect_.c:502 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "�� Ũ�¨��� �� ���� ��Ũ�����Ţ���\n" "���측� ��¡Ţ��� ����" #: ../../standalone/drakconnect_.c:559 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "���Ǣ�� ������ ������� ����..\n" "������� ��š� ��Ũ� ��� ���� ��Ǣ� ���" #: ../../standalone/drakconnect_.c:583 msgid "Internet connection configuration" msgstr "������� ��Ũ�������" #: ../../standalone/drakconnect_.c:587 msgid "Internet Connection Configuration" msgstr "������� ��Ũ�������" #: ../../standalone/drakconnect_.c:596 msgid "Connection type: " msgstr "������ Ũ�: " #: ../../standalone/drakconnect_.c:602 msgid "Parameters" msgstr "Ũ�Ө�" #: ../../standalone/drakconnect_.c:620 msgid "Gateway" msgstr "Ѩ�š¢�" #: ../../standalone/drakconnect_.c:629 msgid "Ethernet Card" msgstr "Ũ�¨��� ��" #: ../../standalone/drakconnect_.c:630 msgid "DHCP Client" msgstr "DHCP ����" #: ../../standalone/drakfloppy_.c:64 msgid "usage: drakfloppy\n" msgstr "������: ʧ�즿������\n" #: ../../standalone/drakfloppy_.c:68 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/drakfloppy_.c:69 msgid "Module name" msgstr "��Ȣ� ����" #: ../../standalone/drakfloppy_.c:69 msgid "Size" msgstr "���" #: ../../standalone/drakfloppy_.c:74 msgid "drakfloppy" msgstr "ʧ�즿������" #: ../../standalone/drakfloppy_.c:91 msgid "boot disk creation" msgstr "������ �� ��š��" #: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112 msgid "default" msgstr "���������" #: ../../standalone/drakfloppy_.c:115 #, c-format msgid "DrakFloppy Error: %s" msgstr "ʧ�즿������ ����: %s" #: ../../standalone/drakfloppy_.c:126 msgid "kernel version" msgstr "�� ��Ǣ£�" #: ../../standalone/drakfloppy_.c:132 msgid "General" msgstr "����" #: ../../standalone/drakfloppy_.c:137 msgid "Expert Area" msgstr "�ɢ������ Ш�" #: ../../standalone/drakfloppy_.c:140 msgid "mkinitrd optional arguments" msgstr "" #: ../../standalone/drakfloppy_.c:141 msgid "Add a module" msgstr "����� ���" #: ../../standalone/drakfloppy_.c:161 msgid "force" msgstr "�Ģ�� ���" #: ../../standalone/drakfloppy_.c:162 msgid "if needed" msgstr "��������" #: ../../standalone/drakfloppy_.c:163 msgid "omit scsi modules" msgstr "scsi �ڸ�� ���측��" #: ../../standalone/drakfloppy_.c:164 msgid "omit raid modules" msgstr " raid �ڸ�� ���측��" #: ../../standalone/drakfloppy_.c:200 msgid "Remove a module" msgstr "�ڸ�� ��츢Ţ�" #: ../../standalone/drakfloppy_.c:222 msgid "Output" msgstr "��Ǣ����" #: ../../standalone/drakfloppy_.c:234 msgid "Build the disk" msgstr "�� ��š��" #: ../../standalone/drakfloppy_.c:377 #, c-format msgid "Be sure a media is present for the device %s" msgstr " %s ������ ���� ��Ǿ� ��� �â���" #: ../../standalone/drakfloppy_.c:382 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "%s ������ ���� ���� ���� �ؾ ��¡� ����¢� ���ġ�. ��צ��� ���� ��ǣ� " "���" #: ../../standalone/drakfloppy_.c:384 #, c-format msgid "Unable to fork: %s" msgstr "" #: ../../standalone/drakfloppy_.c:388 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "mkbootdisk � ���Ţ���: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:231 #, fuzzy msgid "Search installed fonts" msgstr "����� ��ġ��" #: ../../standalone/drakfont_.c:233 #, fuzzy msgid "Unselect fonts installed" msgstr "�������Ţ���" #: ../../standalone/drakfont_.c:257 msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont_.c:260 msgid "no fonts found" msgstr "" #: ../../standalone/drakfont_.c:269 ../../standalone/drakfont_.c:323 #: ../../standalone/drakfont_.c:379 ../../standalone/drakfont_.c:468 #: ../../standalone/drakfont_.c:479 ../../standalone/drakfont_.c:506 #: ../../standalone/drakfont_.c:520 ../../standalone/drakfont_.c:537 #, fuzzy msgid "done" msgstr "����" #: ../../standalone/drakfont_.c:275 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:321 #, fuzzy msgid "Reselect correct fonts" msgstr "������ ���š��" #: ../../standalone/drakfont_.c:325 msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont_.c:349 msgid "Search fonts in installed list" msgstr "" #: ../../standalone/drakfont_.c:377 #, fuzzy msgid "Fonts copy" msgstr "�������" #: ../../standalone/drakfont_.c:381 #, fuzzy msgid "True Type fonts installation" msgstr "����� Ũ���� ����� ����" #: ../../standalone/drakfont_.c:389 msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont_.c:394 msgid "True Type install done" msgstr "" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:429 #, fuzzy msgid "Fonts conversion" msgstr "�ɢ��� ����� �����" #: ../../standalone/drakfont_.c:409 ../../standalone/drakfont_.c:433 #: ../../standalone/drakfont_.c:464 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:419 ../../standalone/drakfont_.c:442 msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont_.c:452 msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:459 msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:470 msgid "Suppress temporary Files" msgstr "" #: ../../standalone/drakfont_.c:473 #, fuzzy msgid "Restart XFS" msgstr "�ڦ�����" #: ../../standalone/drakfont_.c:518 ../../standalone/drakfont_.c:532 msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont_.c:534 #, fuzzy msgid "xfs restart" msgstr "�ڦ�����" #: ../../standalone/drakfont_.c:542 ../../standalone/drakfont_.c:951 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:630 #, fuzzy msgid "Fonts Importation" msgstr "Ÿ����� ��������" #: ../../standalone/drakfont_.c:660 msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont_.c:668 msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont_.c:679 #, fuzzy msgid "Advanced Options" msgstr "�ġ��¡� ������θ�" #: ../../standalone/drakfont_.c:687 #, fuzzy msgid "Font List" msgstr "�������" #: ../../standalone/drakfont_.c:909 #, fuzzy msgid "Choose the applications that will support the fonts:" msgstr "�� ������ ��� ���Φ�� ���� �������" #: ../../standalone/drakfont_.c:918 #, fuzzy msgid "Ghostscript" msgstr "PDF����" #: ../../standalone/drakfont_.c:925 #, fuzzy msgid "StarOffice" msgstr "���� ��Ţ��" #: ../../standalone/drakfont_.c:932 #, fuzzy msgid "Abiword" msgstr "����š��" #: ../../standalone/drakfont_.c:939 #, fuzzy msgid "Generic Printers" msgstr "����-�� ����¸�" #: ../../standalone/drakfont_.c:1016 msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont_.c:1063 #, fuzzy msgid "Install List" msgstr "���� �������" #: ../../standalone/drakfont_.c:1106 msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont_.c:1113 msgid "here if no." msgstr "" #: ../../standalone/drakfont_.c:1174 msgid "Unselected All" msgstr "" #: ../../standalone/drakfont_.c:1178 msgid "Selected All" msgstr "" #: ../../standalone/drakfont_.c:1182 #, fuzzy msgid "Remove List" msgstr "Ѩ�Ţ�� ����" #: ../../standalone/drakfont_.c:1204 ../../standalone/drakfont_.c:1237 #, fuzzy msgid "Initials tests" msgstr "Ӿ� �����" #: ../../standalone/drakfont_.c:1207 #, fuzzy msgid "Copy fonts on your system" msgstr "Ũ�¨��� �� ���� ������Ţ���" #: ../../standalone/drakfont_.c:1211 #, fuzzy msgid "Install & convert Fonts" msgstr "����� �����, ���ɡ��" #: ../../standalone/drakfont_.c:1215 #, fuzzy msgid "Post Install" msgstr "����� ���Ţ" #: ../../standalone/drakfont_.c:1240 #, fuzzy msgid "Remove fonts on your system" msgstr "Ũ�¨��� �� ���� ������Ţ���" #: ../../standalone/drakfont_.c:1244 #, fuzzy msgid "Post Uninstall" msgstr "�������Ţ���" #: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:184 msgid "Internet Connection Sharing" msgstr "����� ������ �â��Ȣ" #: ../../standalone/drakgw_.c:115 msgid "Sorry, we support only 2.4 kernels." msgstr "2.4 ���� ��Χ� �â¡� ���¡���" #: ../../standalone/drakgw_.c:126 msgid "Internet Connection Sharing currently enabled" msgstr "����� ������ �â��Ȣ ��Ũ������Ţ��" #: ../../standalone/drakgw_.c:127 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "����� ������ �â��Ȣ ��Ũ������Ţ��. ������ \n" "������ ����.\n" "\n" "��� ���� �����?" #: ../../standalone/drakgw_.c:131 msgid "disable" msgstr "Ӽ����" #: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "dismiss" msgstr "����" #: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "reconfigure" msgstr "����Ũ�" #: ../../standalone/drakgw_.c:134 msgid "Disabling servers..." msgstr "�â��Ȣ�� Ӽ�����θ����..." #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "����� ������ �â��Ȣ ������ Ӽ����������." #: ../../standalone/drakgw_.c:151 msgid "Internet Connection Sharing currently disabled" msgstr "����� ������ �â��Ȣ ������ Ӽ����������." #: ../../standalone/drakgw_.c:152 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "����� ������ �â��Ȣ ��Ũ������Ţ��.�ɡ�, ������ \n" " Ӽ��������.\n" "\n" "��� ���� �����?" #: ../../standalone/drakgw_.c:156 msgid "enable" msgstr "��������" #: ../../standalone/drakgw_.c:163 msgid "Enabling servers..." msgstr "�â��Ȣ��� ��������" #: ../../standalone/drakgw_.c:168 msgid "Internet connection sharing is now enabled." msgstr "����� ������ �â��Ȣ ��������� ����" #: ../../standalone/drakgw_.c:185 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "���� ����� ����� ������ �â��Ȣ¡�.\n" " ��Ũ����� ����. ������ �� ������ ����š� ����� �â��Ȣ�� ţ��� ������ " "����¢���.��ġ� ���� ��� ����� ���������\n" "���� �� �ɢ��� Ũ�¨��� �� ����" #: ../../standalone/drakgw_.c:213 #, c-format msgid "Interface %s (using module %s)" msgstr " %s ��� Ũ�¨��� ��( %s ��� ��� ���� �������� ����) " #: ../../standalone/drakgw_.c:214 #, c-format msgid "Interface %s" msgstr " %s ��� Ũ�¨��� ��" #: ../../standalone/drakgw_.c:222 msgid "No network adapter on your system!" msgstr "Ũ�¨��� �� ���� ������Ţ���" #: ../../standalone/drakgw_.c:223 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "Ũ�¨��� �� ���� ������Ţ���. ����� ������� ��Ũ���� ��Ţ�� �����" #: ../../standalone/drakgw_.c:229 msgid "Network interface" msgstr "Ũ�¨��� ��" #: ../../standalone/drakgw_.c:230 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "��� �� Ũ�¨��� �� ��Χ� ����\n" "\n" "%s\n" "\n" "��� ���� ���� Ũ�¨������ ��������" #: ../../standalone/drakgw_.c:239 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "�� Ũ�¨��� �� ���� Ũ�¨������м� ��������" #: ../../standalone/drakgw_.c:265 msgid "Network interface already configured" msgstr "Ũ�¨��� �� ���ɧ� ��Ũ������Ţ��" #: ../../standalone/drakgw_.c:266 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Ũ�¨��� ��(%s) ���ɧ� ��Ũ������Ţ��\n" "\n" "����� ����Ũ�� Ţ��Ҹ�ȣ��ǡ\n" "\n" "š�����" #: ../../standalone/drakgw_.c:271 msgid "Automatic reconfiguration" msgstr "��ɢ�� ��Ũ���" #: ../../standalone/drakgw_.c:272 msgid "Show current interface configuration" msgstr "�������� ��Ũ����� ����" #: ../../standalone/drakgw_.c:274 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "`%s' �������� ��Ũ���:\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" #: ../../standalone/drakgw_.c:287 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:294 #, fuzzy msgid "Local Network adress" msgstr "C-Class Local Network" #: ../../standalone/drakgw_.c:298 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:304 msgid "(This) DHCP Server IP" msgstr "DHCP �â��Ȣ¢� IP" #: ../../standalone/drakgw_.c:305 #, fuzzy msgid "The DNS Server IP" msgstr "DHCP �â��Ȣ¢� IP" #: ../../standalone/drakgw_.c:306 #, fuzzy msgid "The internal domain name" msgstr "Ҿ�� �������Ȣ¢� ����" #: ../../standalone/drakgw_.c:307 msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw_.c:308 msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw_.c:309 msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:310 msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:311 msgid "Re-configure interface and DHCP server" msgstr "Ũ�¨��� �𨼨��� DHCP �â��Ȣ���� ���Ȣ¨�" #: ../../standalone/drakgw_.c:318 msgid "The Local Network did not finish with `.0', bailing out." msgstr "���� �������� ��ɢ���" #: ../../standalone/drakgw_.c:329 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "%s! ���� �������� ��ɢ��� \n" #: ../../standalone/drakgw_.c:339 msgid "Configuring..." msgstr "��Ũ����θ���..." #: ../../standalone/drakgw_.c:340 msgid "Configuring scripts, installing software, starting servers..." msgstr "������� �������� ��Ũ����θ���..." #: ../../standalone/drakgw_.c:376 #, c-format msgid "Problems installing package %s" msgstr "%s �������� ����ž�� ���� ��������" #: ../../standalone/drakgw_.c:509 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "����� ������ �â��Ȣ ��Ũ������Ţ��.\n" "���� Ũ�¨������ ��� ������� ������ ���� ����� ������� ������ġ�" #: ../../standalone/drakgw_.c:528 msgid "The setup has already been done, but it's currently disabled." msgstr "����� ������ �â��Ȣ ��Ũ������Ţ��.�ɡ�, ������ Ӽ��������" #: ../../standalone/drakgw_.c:529 msgid "The setup has already been done, and it's currently enabled." msgstr "����� ������ �â��Ȣ ��Ũ������Ţ��" #: ../../standalone/drakgw_.c:530 msgid "No Internet Connection Sharing has ever been configured." msgstr "��Ũ� ����� ������ �â��Ȣ ��Ũ�����Ţ���" #: ../../standalone/drakgw_.c:535 msgid "Internet connection sharing configuration" msgstr "����� ������ �â��Ȣ ��Ũ���" #: ../../standalone/drakgw_.c:542 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "����� ������ �â��Ȣ ��Ũ����� š����!\n" "\n" "%s\n" "\n" "��Ũ� ��� ���� ���ɡ� ������ ��¡Ţ��� ����" #: ../../standalone/drakperm_.c:42 msgid "group" msgstr "" #: ../../standalone/drakperm_.c:42 msgid "path" msgstr "" #: ../../standalone/drakperm_.c:42 #, fuzzy msgid "permissions" msgstr "Ÿ��Ȣ� %s" #: ../../standalone/drakperm_.c:42 #, fuzzy msgid "user" msgstr "����" #: ../../standalone/drakperm_.c:49 msgid "Up" msgstr "" #: ../../standalone/drakperm_.c:50 #, fuzzy msgid "delete" msgstr "����" #: ../../standalone/drakperm_.c:51 msgid "edit" msgstr "" #: ../../standalone/drakperm_.c:52 #, fuzzy msgid "Down" msgstr "����" #: ../../standalone/drakperm_.c:53 #, fuzzy msgid "add a rule" msgstr "����� ���" #: ../../standalone/drakperm_.c:54 msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm_.c:57 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm_.c:62 msgid "Add a new rule at the end" msgstr "" #: ../../standalone/drakperm_.c:63 msgid "Edit curent rule" msgstr "" #: ../../standalone/drakperm_.c:64 msgid "Up selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:65 msgid "Down selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:66 #, fuzzy msgid "Delete selected rule" msgstr "Ѩ�Ţ�� ����" #: ../../standalone/drakperm_.c:237 msgid "browse" msgstr "" #: ../../standalone/drakperm_.c:244 #, fuzzy msgid "Current user" msgstr "��ɨ� ���즸�����" #: ../../standalone/drakperm_.c:249 #, fuzzy msgid "Permissions" msgstr "��Ǣ£�: %s\n" #: ../../standalone/drakperm_.c:250 msgid "Path" msgstr "" #: ../../standalone/drakperm_.c:251 #, fuzzy msgid "Property" msgstr "�������" #: ../../standalone/drakperm_.c:253 msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm_.c:254 msgid "Set-UID" msgstr "" #: ../../standalone/drakperm_.c:255 msgid "Set-GID" msgstr "" #: ../../standalone/drakperm_.c:310 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm_.c:311 #, fuzzy msgid "Use owner id for execution" msgstr "��ɡ� ���������" #: ../../standalone/drakperm_.c:312 #, fuzzy msgid "Use group id for execution" msgstr "��ɡ� ���������" #: ../../standalone/drakperm_.c:313 msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm_.c:318 #, fuzzy msgid "Path selection" msgstr "������� ����" #: ../../standalone/drakperm_.c:364 #, fuzzy msgid "user :" msgstr "����" #: ../../standalone/drakperm_.c:366 msgid "group :" msgstr "" #: ../../standalone/draksound_.c:47 #, fuzzy msgid "No Sound Card detected!" msgstr "�������Ţ���" #: ../../standalone/draksound_.c:48 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound_.c:55 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksplash_.c:34 msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/draksplash_.c:78 #, fuzzy msgid "first step creation" msgstr "������ �� ��š��" #: ../../standalone/draksplash_.c:79 #, fuzzy msgid "final resolution" msgstr "�â������" #: ../../standalone/draksplash_.c:80 ../../standalone/draksplash_.c:172 #, fuzzy msgid "choose image file" msgstr "����� ����� ����� ���" #: ../../standalone/draksplash_.c:81 #, fuzzy msgid "Theme name" msgstr "k���Ţ��¡��" #: ../../standalone/draksplash_.c:85 msgid "Browse" msgstr "" #: ../../standalone/draksplash_.c:99 ../../standalone/draksplash_.c:162 #, fuzzy msgid "Configure bootsplash picture" msgstr "�������� ���ɡ�� ��š� ���Ţ���" #: ../../standalone/draksplash_.c:100 msgid "" "x coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:101 msgid "" "y coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:102 msgid "text width" msgstr "" #: ../../standalone/draksplash_.c:103 msgid "text box height" msgstr "" #: ../../standalone/draksplash_.c:104 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:105 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:106 msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:107 msgid "the heigth of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:108 msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:121 #, fuzzy msgid "Preview" msgstr "�����" #: ../../standalone/draksplash_.c:123 #, fuzzy msgid "Save theme" msgstr "����츨� �������" #: ../../standalone/draksplash_.c:124 #, fuzzy msgid "Choose color" msgstr "����¸� ����� ���" #: ../../standalone/draksplash_.c:127 #, fuzzy msgid "Display logo on Console" msgstr "����츨� Ө���� ��� �������" #: ../../standalone/draksplash_.c:128 msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash_.c:165 ../../standalone/draksplash_.c:329 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "" #: ../../standalone/draksplash_.c:212 msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash_.c:435 #, fuzzy msgid "ProgressBar color selection" msgstr "Ө�� ������" #: ../../standalone/draksplash_.c:456 msgid "You must choose an image file first!" msgstr "" #: ../../standalone/draksplash_.c:465 #, fuzzy msgid "Generating preview ..." msgstr "�������� ��������" #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:511 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakxtv_.c:49 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "Canada (cable)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv_.c:68 msgid "East Europe" msgstr "" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "France [SECAM]" msgstr "�����" #: ../../standalone/drakxtv_.c:68 msgid "Ireland" msgstr "���ġ��" #: ../../standalone/drakxtv_.c:68 msgid "West Europe" msgstr "" #: ../../standalone/drakxtv_.c:69 msgid "Australia" msgstr "������Ģ¡" #: ../../standalone/drakxtv_.c:69 #, fuzzy msgid "Newzealand" msgstr "����ġ��" #: ../../standalone/drakxtv_.c:70 msgid "South Africa" msgstr "" #: ../../standalone/drakxtv_.c:71 msgid "Argentina" msgstr "������ɡ" #: ../../standalone/drakxtv_.c:72 msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv_.c:107 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv_.c:109 msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv_.c:110 msgid "Area:" msgstr "" #: ../../standalone/drakxtv_.c:114 msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv_.c:122 msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:125 msgid "There was an error while scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:126 #, fuzzy msgid "XawTV isn't installed!" msgstr "�������Ţ���" #: ../../standalone/drakxtv_.c:129 msgid "Have a nice day!" msgstr "�ɢ� ��š�����" #: ../../standalone/drakxtv_.c:130 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv_.c:153 msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv_.c:154 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/harddrake2_.c:8 #, fuzzy msgid "" "\n" "Usage: harddrake [-h|--help] [--test]\n" msgstr "������: ʧ��Ţ��[--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "������: ʧ��Ţ��[--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:32 msgid "Please, choose your keyboard layout." msgstr "��צ��� ���� Ţ����Ĩ� �� ������ ���� ����" #: ../../standalone/keyboarddrake_.c:41 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:24 msgid "Change Cd-Rom" msgstr "��ʨ� ����" #: ../../standalone/livedrake_.c:25 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "��צ��� ����� ��ʨ� ���á��� �����.���� �â ��� \n" "���� ��Ǣ� ������. ���� ��� ���� ��Ǣ� ������ ����� ����Ţ��" #: ../../standalone/livedrake_.c:35 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/localedrake_.c:33 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:86 ../../ugtk.pm_.c:285 #, fuzzy msgid "logdrake" msgstr "��ʦ��������" #: ../../standalone/logdrake_.c:96 msgid "Show only for the selected day" msgstr "" #: ../../standalone/logdrake_.c:103 msgid "/File/_New" msgstr "/�����/_Ҿ���" #: ../../standalone/logdrake_.c:103 #, fuzzy msgid "<control>N" msgstr "<control>Q" #: ../../standalone/logdrake_.c:104 msgid "/File/_Open" msgstr "/�����/_���" #: ../../standalone/logdrake_.c:104 #, fuzzy msgid "<control>O" msgstr "<control>Q" #: ../../standalone/logdrake_.c:105 msgid "/File/_Save" msgstr "/�����/_����" #: ../../standalone/logdrake_.c:105 #, fuzzy msgid "<control>S" msgstr "<control>Q" #: ../../standalone/logdrake_.c:106 #, fuzzy msgid "/File/Save _As" msgstr "/�����/_����" #: ../../standalone/logdrake_.c:107 msgid "/File/-" msgstr "/�����/-" #: ../../standalone/logdrake_.c:109 msgid "/_Options" msgstr "/_Ţ������" #: ../../standalone/logdrake_.c:110 #, fuzzy msgid "/Options/Test" msgstr "/_Ţ������" #: ../../standalone/logdrake_.c:112 msgid "/Help/_About..." msgstr "/��Ţ/_��Ȣ..." #: ../../standalone/logdrake_.c:119 #, fuzzy msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/logdrake_.c:120 #, fuzzy msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/logdrake_.c:174 msgid "User" msgstr "����" #: ../../standalone/logdrake_.c:175 #, fuzzy msgid "Messages" msgstr "Mesa-Ţ��¡��" #: ../../standalone/logdrake_.c:176 msgid "Syslog" msgstr "" #: ../../standalone/logdrake_.c:177 #, fuzzy msgid "Mandrake Tools Explanations" msgstr "���ʧ�� ������� ����" #: ../../standalone/logdrake_.c:180 #, fuzzy msgid "search" msgstr "���" #: ../../standalone/logdrake_.c:186 #, fuzzy msgid "A tool to monitor your logs" msgstr "��츽��� ���� " #: ../../standalone/logdrake_.c:187 msgid "Settings" msgstr "����Ҹ�" #: ../../standalone/logdrake_.c:192 msgid "matching" msgstr "" #: ../../standalone/logdrake_.c:193 msgid "but not matching" msgstr "" #: ../../standalone/logdrake_.c:197 #, fuzzy msgid "Choose file" msgstr "����� ����� �������" #: ../../standalone/logdrake_.c:202 #, fuzzy msgid "Calendar" msgstr "����� " #: ../../standalone/logdrake_.c:212 #, fuzzy msgid "Content of the file" msgstr "����� ������ ������ ������" #: ../../standalone/logdrake_.c:216 ../../standalone/logdrake_.c:392 #, fuzzy msgid "Mail alert" msgstr "������" #: ../../standalone/logdrake_.c:268 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../standalone/logdrake_.c:409 #, fuzzy msgid "Mail alert configuration" msgstr "�ȢŢ����â� ��Ũ��� " #: ../../standalone/logdrake_.c:410 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake_.c:417 msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake_.c:418 msgid "Domain Name Resolver" msgstr "" #: ../../standalone/logdrake_.c:419 #, fuzzy msgid "Ftp Server" msgstr "����¸�" #: ../../standalone/logdrake_.c:420 #, fuzzy msgid "Postfix Mail Server" msgstr "������ �â��Ȣ" #: ../../standalone/logdrake_.c:421 #, fuzzy msgid "Samba Server" msgstr "�Ģ� �â��Ȣ" #: ../../standalone/logdrake_.c:422 #, fuzzy msgid "SSH Server" msgstr "����¸�" #: ../../standalone/logdrake_.c:423 #, fuzzy msgid "Webmin Service" msgstr "����Ÿ�" #: ../../standalone/logdrake_.c:424 #, fuzzy msgid "Xinetd Service" msgstr "����Ÿ�" #: ../../standalone/logdrake_.c:431 #, fuzzy msgid "service setting" msgstr "�Ģ �������" #: ../../standalone/logdrake_.c:432 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "" #: ../../standalone/logdrake_.c:444 #, fuzzy msgid "load setting" msgstr "�� ����Ҹ�" #: ../../standalone/logdrake_.c:445 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:458 msgid "alert configuration" msgstr "�ȢŢ����â� ��Ũ��� " #: ../../standalone/logdrake_.c:459 msgid "Please enter your email address below " msgstr "���� ������ Ӹ�â��� �ո" #: ../../standalone/logdrake_.c:498 msgid "Save as.." msgstr "��� ����.." #: ../../standalone/mousedrake_.c:45 msgid "Please, choose the type of your mouse." msgstr "��צ���, ���� �Ģ¢� Ũ���� ����� �������" #: ../../standalone/mousedrake_.c:58 msgid "Emulate third button?" msgstr "��ȡ�� ����� ������� ������?" #: ../../standalone/printerdrake_.c:57 msgid "Reading printer data ..." msgstr "��ͦ��Ȣ¢� ��� �����θ���" #: ../../standalone/scannerdrake_.c:41 msgid "Detecting devices ..." msgstr "�������� ��������" #: ../../standalone/scannerdrake_.c:41 msgid "Test ports" msgstr "Шȸ��� �������" #: ../../standalone/scannerdrake_.c:53 ../../standalone/scannerdrake_.c:68 #: ../../standalone/scannerdrake_.c:81 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake_.c:56 #, fuzzy, c-format msgid "%s found on %s, configure it?" msgstr "%s ��� ��Ţ %s ¢� �����������.��� ��Ũ������?" #: ../../standalone/scannerdrake_.c:59 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake_.c:65 msgid "Select a scanner" msgstr "��ʨ� ����� �������" #: ../../standalone/scannerdrake_.c:93 #, c-format msgid "This %s scanner is unsupported" msgstr "���� %s ��� ������ �Ũ�� ���¡�" #: ../../standalone/scannerdrake_.c:107 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" "���� %s ��� ��Ũ�����Ţ��� \n" "����� �â¡�� ����� �������" #: ../../standalone/scannerdrake_.c:109 msgid "choose device" msgstr "����� ����� �������" #: ../../standalone/scannerdrake_.c:115 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "���� %s ��� ��Ũ����� �����\n" "���� ʧ���� ��è� ����������" #: ../../standalone/scannerdrake_.c:120 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" "���� %s ��� ��Ũ������Ţ��\n" "����� ��漸�-Ũ�Ţ��-��� ��� ��è� ����������" #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "\"%s\" Ũ� ����� ��� ��â��������:\n" #: ../../standalone/service_harddrake_.c:48 #, fuzzy msgid "Some devices were added:\n" msgstr "" "\n" " %s Ũ� ����� ��� �����������:\n" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "���� ���Ƣ��� ����� ����" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "����� Ũ���� ����� ����" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "����� ��������" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "�Ģ�� ��Ũ�����" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "���� Ţ����Ĩ� �� ����� ����� �������" #: ../../steps.pm_.c:19 msgid "Security" msgstr "��и���" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "���������� �������" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Ÿ����� ��������" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "���� ����� �������� ����� �������" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "���� �������" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "��ɨ�� ������- �� �츢��" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "Ũ�¨��������� ��Ũ�����" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "���Ÿ�� ��Ũ�����" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "���̿�è� �������" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "���̾� ��š�����" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "X-� ��Ũ����" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "������ ����¡� ��������������� �������� ����" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "����� ��è� Ţ�� ��Ǣ�" #: ../../ugtk.pm_.c:648 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*-r-*" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "���¾�/������ ��������" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Ũ�¨���� �����(����)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS /����/��ɡ��/ssh �â��Ȣ��" #: ../../share/compssUsers:999 msgid "Office" msgstr "���� ��Ţ��" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "g���� ��ġ��" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "���� ���/�ź�� ���� ��¡�� ������ ������Ţ��" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "�Ũ����" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "���������/�Ƣ����" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "���� ��Ţ��(Ţ�����, �����,Ũ���� ��Ţ��)" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "��� ���� ��Ţ��- mp3, ��� ��츢��" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "LSB- Ģ�� ������������ ����¡� ������." #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "����� ���� ����� ����� ����� ��Ţ ��" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "K Ũ�Ţ���Ƣ ���� ��ġ����" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "g,i,e ���� �������ž�� �Ǣ��� Ũ�Ţ���Ƣ ��ġ����" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "��漸�-�Ǣ���" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "������, ��������, ������ �������� ��������� ������Ţ��" #: ../../share/compssUsers:999 msgid "Database" msgstr "��������" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL/MySQL ����� �â��Ȣ��" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "���� ������� �Ǣ��� ��Ũ�� ������Ţ��" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "��漸�-�Ģ" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "��Ţ��" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Ө��� ��Ţ��" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "������ �â��Ȣ" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "����� �����" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "��漸 �����" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "��Ũ��Ҹ�" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "���� �� Ũ�Ţ���Ƣ �����[i, g ����Ȩ�]" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "K���ç�ġ��- �� �������ž�� �Ǣ��� Ũ�Ţ���Ƣ ��ġ��" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Ũ�Ţ���Ƣ �����" #: ../../share/compssUsers:999 msgid "Development" msgstr "��š��" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "����, ftpd ����� �â���� ������" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "��� ��š�/�â� ������Ţ��" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "���� ��Ţ��" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "g, e, i ����� ���� ��ġ����" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "gŨ�Ţ�� ����� ������" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C ���� C++ �ĸ ������" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Ũ�¨���� �â��Ȣ" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "������/��������" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Ţ��¡�θ�" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "�Ǣ�� ��츢��/����������" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "��漸�-Ũ�Ţ��" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Ţ��¡�θ�" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "����� ������, ���� ����� ���ġ� ������Ţ��" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "���� ������̸�� �â����" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "�� �������ž�� �Ǣ��� Ũ�Ţ���Ƣ ��ġ��" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "ssh ӾĢ� Ũ�¨���� ��Ţ��" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "���� Ѩ�š¢�" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "��漸 ��츢��/��š� ������" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "��� Ũ�Ţ���Ƣ ��ġ����" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Ө���,�����������, ����� ��ġ���� ���� �θ�" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "���� ��צ��� Ţ������ �� ������ ��� ���ġ�" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "��¡� ���� ��ġ��" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "��漸-��� �â��" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "�ȢŢ�� ���������" #~ msgid "unable to backup lilo message" #~ msgstr "Ģ�ġ ��Ũ� ������� ���Ţ���" #~ msgid "can't change lilo message" #~ msgstr "Ģ�ġ ��Ũ� ���� ���Ţ���"