# Cirilicni prevod drakbootdisk.po fajla.
# Copyright (C) 1997-2003 MandrakeSERBIA.
# Tomislav Jankovic <tomaja@net.yu>, 2000.
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2004-04-01 15:07+0200\n"
"PO-Revision-Date: 2003-02-28 18:21+0100\n"
"Last-Translator: Toma Jankovic_<tomaja@net.yu>\n"
"Language-Team: Serbian <i18n@mandrake.co.yu>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"

#: ../move/move.pm:359
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:369
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:380
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:382
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:383 ../move/move.pm:413
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:394 ../move/move.pm:408
#, fuzzy, c-format
msgid "Key isn't writable"
msgstr "XawTV nije instaliran!"

#: ../move/move.pm:396
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1312
#, c-format
msgid "Reboot"
msgstr "Restart"

#: ../move/move.pm:410
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:412
#, fuzzy, c-format
msgid "Retry"
msgstr "Obnovi"

#: ../move/move.pm:423
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:423
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Samo momenat, podešavam nivo sigurnosti..."

#: ../move/move.pm:445
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Custom konfiguracija"

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Samo momenat, podešavam nivo sigurnosti..."

#: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563
#: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117
#: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228
#: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384
#: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510
#: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82
#: install_steps_interactive.pm:40 interactive/http.pm:118
#: interactive/http.pm:119 network/netconnect.pm:944 network/netconnect.pm:947
#: network/netconnect.pm:992 network/netconnect.pm:996
#: network/netconnect.pm:1063 network/netconnect.pm:1113
#: network/netconnect.pm:1118 network/netconnect.pm:1133
#: network/netconnect.pm:1336 printer/printerdrake.pm:213
#: printer/printerdrake.pm:220 printer/printerdrake.pm:245
#: printer/printerdrake.pm:393 printer/printerdrake.pm:398
#: printer/printerdrake.pm:411 printer/printerdrake.pm:421
#: printer/printerdrake.pm:1067 printer/printerdrake.pm:1114
#: printer/printerdrake.pm:1151 printer/printerdrake.pm:1195
#: printer/printerdrake.pm:1199 printer/printerdrake.pm:1213
#: printer/printerdrake.pm:1303 printer/printerdrake.pm:1383
#: printer/printerdrake.pm:1387 printer/printerdrake.pm:1391
#: printer/printerdrake.pm:1440 printer/printerdrake.pm:1497
#: printer/printerdrake.pm:1501 printer/printerdrake.pm:1515
#: printer/printerdrake.pm:1625 printer/printerdrake.pm:1629
#: printer/printerdrake.pm:1666 printer/printerdrake.pm:1731
#: printer/printerdrake.pm:1749 printer/printerdrake.pm:1758
#: printer/printerdrake.pm:1767 printer/printerdrake.pm:1778
#: printer/printerdrake.pm:1840 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2551 printer/printerdrake.pm:2557
#: printer/printerdrake.pm:3010 printer/printerdrake.pm:3014
#: printer/printerdrake.pm:3018 printer/printerdrake.pm:3421
#: printer/printerdrake.pm:3664 printer/printerdrake.pm:3677
#: printer/printerdrake.pm:3817 printer/printerdrake.pm:3909
#: standalone/drakTermServ:416 standalone/drakTermServ:769
#: standalone/drakTermServ:776 standalone/drakTermServ:971
#: standalone/drakTermServ:1416 standalone/drakTermServ:1421
#: standalone/drakTermServ:1428 standalone/drakTermServ:1439
#: standalone/drakTermServ:1459 standalone/drakauth:36
#: standalone/drakbackup:581 standalone/drakbackup:694
#: standalone/drakbackup:1187 standalone/drakbackup:1220
#: standalone/drakbackup:1735 standalone/drakbackup:1898
#: standalone/drakbackup:2513 standalone/drakbackup:4286
#: standalone/drakbackup:4509 standalone/drakboot:255 standalone/drakbug:267
#: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:608
#: standalone/drakconnect:611 standalone/drakconnect:632
#: standalone/drakfloppy:301 standalone/drakfloppy:305
#: standalone/drakfloppy:311 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:259 standalone/drakfont:600 standalone/draksplash:21
#: standalone/drakxtv:105 standalone/logdrake:170 standalone/logdrake:467
#: standalone/logdrake:472 standalone/scannerdrake:58
#: standalone/scannerdrake:200 standalone/scannerdrake:259
#: standalone/scannerdrake:683 standalone/scannerdrake:694
#: standalone/scannerdrake:833 standalone/scannerdrake:844
#: standalone/scannerdrake:914 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Greška"

#: ../move/move.pm:503 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Greška, ali neznam kako da je razrešim.\n"
"Nastavite na vaš rizik!"

#: ../move/move.pm:559 install_steps_interactive.pm:40
#, c-format
msgid "An error occurred"
msgstr "Hm,pojavila se greška"

#: ../move/move.pm:565
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:580
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Ukloni loopback fajl ?"

#: ../move/move.pm:581
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:60
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:81
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "pristup X programima"

#: ../move/tree/mdk_totem:82
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Podrška za radio :"

#: ../move/tree/mdk_totem:87
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:16
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:17
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:18
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:22
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:23
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:24
#, c-format
msgid "64 MB or more"
msgstr "64 MB ili više"

#: Xconfig/card.pm:211
#, c-format
msgid "X server"
msgstr "X server"

#: Xconfig/card.pm:212
#, c-format
msgid "Choose an X server"
msgstr "Izaberite X server"

#: Xconfig/card.pm:244
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head konfiguracija"

#: Xconfig/card.pm:245
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Vaš sistem podržava multiple head konfiguraciju.\n"
"Šta želite da uradite?"

#: Xconfig/card.pm:312
#, fuzzy, c-format
msgid "Can't install XFree package: %s"
msgstr "Instaliram paket %s"

#: Xconfig/card.pm:322
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Količina memorije na grafičkoj kartici"

#: Xconfig/card.pm:398
#, c-format
msgid "XFree configuration"
msgstr "XFree konfiguracija"

#: Xconfig/card.pm:400
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Koju XFree konfiguraciju želite da imate ?"

#: Xconfig/card.pm:434
#, c-format
msgid "Configure all heads independently"
msgstr "Podesi sve glave nezavisno"

#: Xconfig/card.pm:435
#, c-format
msgid "Use Xinerama extension"
msgstr "Koristi Xinerama ekstenziju"

#: Xconfig/card.pm:440
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Podesi samo karticu \"%s\"%s"

#: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s sa 3D hardverskom akceleracijom"

#: Xconfig/card.pm:470
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
"Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D."

#: Xconfig/card.pm:472 Xconfig/card.pm:495
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Vaša kartica može imati 3D hardversku akceleraciju sa XFree %s."

#: Xconfig/card.pm:480 Xconfig/card.pm:501
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"

#: Xconfig/card.pm:483
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do "
"blokiranja računara.\n"
"Vašu karticu podržava XFree %s koji može imati bolju podršku i za 2D."

#: Xconfig/card.pm:486 Xconfig/card.pm:503
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Vaša kartica može imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podrška za 3D i može dovesti do "
"blokiranja računara."

#: Xconfig/card.pm:509
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (Instalacija displej drajver)"

#: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:830
#, c-format
msgid "Custom"
msgstr "Izbor po želji"

#: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14
#: install_steps_interactive.pm:83 printer/printerdrake.pm:608
#: printer/printerdrake.pm:4076 standalone/draksplash:120
#: standalone/harddrake2:188 standalone/logdrake:175
#: standalone/scannerdrake:445
#, c-format
msgid "Quit"
msgstr "Kraj"

#: Xconfig/main.pm:115
#, c-format
msgid "Graphic Card"
msgstr "Grafička kartica"

#: Xconfig/main.pm:118 Xconfig/monitor.pm:100
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228
#, c-format
msgid "Resolution"
msgstr "Rezolucija"

#: Xconfig/main.pm:126
#, c-format
msgid "Test"
msgstr "Test"

#: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410
#: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:298
#: standalone/drakconnect:404 standalone/drakconnect:405
#: standalone/drakconnect:576 standalone/drakfont:494 standalone/drakfont:554
#: standalone/harddrake2:185
#, c-format
msgid "Options"
msgstr "Opcije"

#: Xconfig/main.pm:180
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Sačuvaj promene?\n"
"Trenutna konfiguracija je:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:101
#, c-format
msgid "Choose a monitor"
msgstr "Izaberite monitor"

#: Xconfig/monitor.pm:107
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:108 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Generic"

#: Xconfig/monitor.pm:109 standalone/drakconnect:556 standalone/harddrake2:68
#: standalone/harddrake2:69
#, c-format
msgid "Vendor"
msgstr "Proizvođač"

#: Xconfig/monitor.pm:119
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play testiranje nije uspelo. Izaberite tačan model monitora"

#: Xconfig/monitor.pm:124
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Morate da navedete horizontalni sinhronizacioni opseg vašeg monitora.\n"
"Možete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
"industrijskim standardima monitora, ili da navedete određeni opseg.\n"
"\n"
"VEOMA JE VAŽNO da ne navedete tip monitora koji ima ovaj opseg veći nego\n"
"što ga ima vaš monitor. Ako niste sigurni, odaberite manje vrednosti."

#: Xconfig/monitor.pm:131
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horizontalna frekvencija"

#: Xconfig/monitor.pm:132
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertikalna frekvencija"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 boja (8-bitna paleta)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 hiljade boja (15-bitna paleta)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 hiljada boja (16-bitna paleta)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 miliona boja (24-bitna paleta)"

#: Xconfig/resolution_and_depth.pm:16
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 milijarde boja (32-bitna paleta)"

#: Xconfig/resolution_and_depth.pm:141
#, c-format
msgid "Resolutions"
msgstr "Rezolucija"

#: Xconfig/resolution_and_depth.pm:275
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Izaberite rezoluciju i broj boja pri prikazu"

#: Xconfig/resolution_and_depth.pm:276
#, c-format
msgid "Graphics card: %s"
msgstr "Grafička kartica: %s"

#: Xconfig/resolution_and_depth.pm:289 interactive.pm:403
#: interactive/gtk.pm:759 interactive/http.pm:103 interactive/http.pm:157
#: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakbackup:4045 standalone/drakbackup:4075
#: standalone/drakbackup:4162 standalone/drakbackup:4175
#: standalone/drakbackup:4247 standalone/drakconnect:165
#: standalone/drakconnect:786 standalone/drakconnect:873
#: standalone/drakconnect:972 standalone/drakups:194
#: standalone/net_monitor:303 ugtk2.pm:413 ugtk2.pm:510 ugtk2.pm:1075
#: ugtk2.pm:1098
#, c-format
msgid "Ok"
msgstr "U redu"

#: Xconfig/resolution_and_depth.pm:289 any.pm:870 diskdrake/smbnfs_gtk.pm:81
#: help.pm:197 help.pm:457 install_steps_gtk.pm:490
#: install_steps_interactive.pm:781 interactive.pm:404 interactive/gtk.pm:763
#: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307
#: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3088
#: standalone/drakautoinst:217 standalone/drakbackup:4009
#: standalone/drakbackup:4035 standalone/drakbackup:4058
#: standalone/drakbackup:4089 standalone/drakbackup:4113
#: standalone/drakbackup:4137 standalone/drakbackup:4189
#: standalone/drakbackup:4216 standalone/drakbackup:4241
#: standalone/drakconnect:164 standalone/drakconnect:871
#: standalone/drakconnect:971 standalone/drakfont:663 standalone/drakfont:740
#: standalone/drakups:201 standalone/logdrake:175 standalone/net_monitor:299
#: ugtk2.pm:407 ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:1075
#, c-format
msgid "Cancel"
msgstr "Poništi"

#: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154
#: install_steps_gtk.pm:269 install_steps_gtk.pm:670 interactive.pm:498
#: interactive/gtk.pm:623 interactive/gtk.pm:625 standalone/drakTermServ:316
#: standalone/drakbackup:4010 standalone/drakbackup:4039
#: standalone/drakbackup:4062 standalone/drakbackup:4093
#: standalone/drakbackup:4117 standalone/drakbackup:4141
#: standalone/drakbackup:4174 standalone/drakbackup:4193
#: standalone/drakbackup:4220 standalone/drakbackup:4245
#: standalone/drakbackup:4264 standalone/drakbug:157
#: standalone/drakconnect:160 standalone/drakconnect:236
#: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:296
#: standalone/harddrake2:184 ugtk2.pm:1188 ugtk2.pm:1189
#, c-format
msgid "Help"
msgstr "Pomoć"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Testiranje konfiguracije"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Da li hoćete da testirate konfiguraciju?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Upozorenje: testiranje ove grafičke kartice može blokirati vaš računar"

#: Xconfig/test.pm:71
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"pojavila se greška:\n"
"%s\n"
"Pokušajte da promenite neke od parametara"

#: Xconfig/test.pm:149
#, c-format
msgid "Leaving in %d seconds"
msgstr "Izlazim za %d sekundi"

#: Xconfig/test.pm:149
#, c-format
msgid "Is this the correct setting?"
msgstr "Da li je ovo ispravno podešeno?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tip tastature: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tip miša: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Miš je postavljen na uređaj: %s\n"

#: Xconfig/various.pm:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor - horizontalna frekvencija: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor - vertikalno osvežavanje: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafička kartica: %s\n"

#: Xconfig/various.pm:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memorija na grafičkoj kartici: %s kB\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Broj boja: %s\n"

#: Xconfig/various.pm:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezolucija: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 server: %s\n"

#: Xconfig/various.pm:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 drajver: %s\n"

#: Xconfig/various.pm:71
#, c-format
msgid "Graphical interface at startup"
msgstr "X okruženje na startu"

#: Xconfig/various.pm:73
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Ja mogu podesti vaš računar da automatski podiže X okruženje pri startanju.\n"
"Da li želite X okruženje pri restartu ?"

#: Xconfig/various.pm:86
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Vaša grafička kartica izgleda da ima TV-OUT konektor.\n"
"On se može podesiti da radi korišćenjem frame-buffer-a.\n"
"\n"
"Za ovo morate da povežete vašu grafičku karticu sa TV-om pre startanja vašeg "
"kompjutera.\n"
"Onda izaberite \"TVout\" postavku u starteru\n"
"\n"
"Da li imate ovu opciju?"

#: Xconfig/various.pm:98
#, c-format
msgid "What norm is your TV using?"
msgstr "Kakav sistem vaš TV koristi?"

#: any.pm:103 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259
#: standalone/drakconnect:167 standalone/draksec:56 standalone/drakups:90
#: standalone/drakxtv:90 standalone/harddrake2:134
#: standalone/service_harddrake:107
#, c-format
msgid "Please wait"
msgstr "Samo momenat..."

#: any.pm:103
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "Instalacija startera"

#: any.pm:142
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Vi ste odlučili da instalirate starter na particiju.\n"
"Ovo ukazujen ato da već imate instaliran starter na hard disku koji "
"butujete.\n"
"\n"
"Na koji drajv se butujete?"

#: any.pm:165 any.pm:197 help.pm:800
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prvi sektor diska (MBR)"

#: any.pm:166
#, c-format
msgid "First sector of the root partition"
msgstr "Prvi sektor root particije"

#: any.pm:168
#, c-format
msgid "On Floppy"
msgstr "Na disketu"

#: any.pm:170 help.pm:768 help.pm:800 printer/printerdrake.pm:3418
#, c-format
msgid "Skip"
msgstr "Preskoči"

#: any.pm:175
#, c-format
msgid "SILO Installation"
msgstr "SILO instalacija"

#: any.pm:175
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub instalacija"

#: any.pm:176
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Gde biste da instalirate starter?"

#: any.pm:197
#, c-format
msgid "First sector of boot partition"
msgstr "Prvi sektor startne particije"

#: any.pm:209
#, c-format
msgid "Boot Style Configuration"
msgstr "Konfiguracija stila startanja"

#: any.pm:211 any.pm:248
#, c-format
msgid "Bootloader main options"
msgstr "Glavne opcije startera"

#: any.pm:215
#, c-format
msgid "Give the ram size in MB"
msgstr "Prikaži veličinu RAM-a u Mb"

#: any.pm:217
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opcija``Ograničena komandna linika - opcije'' je neupotrebljiva bez lozinke"

#: any.pm:218 any.pm:531 install_steps_interactive.pm:1156
#, c-format
msgid "The passwords do not match"
msgstr "Nepodudarnost lozinki"

#: any.pm:218 any.pm:531 diskdrake/interactive.pm:1255
#: install_steps_interactive.pm:1156
#, c-format
msgid "Please try again"
msgstr "Probajte ponovo"

#: any.pm:223 any.pm:251 help.pm:768
#, c-format
msgid "Bootloader to use"
msgstr "Starter koji će se koristiti"

#: any.pm:225
#, c-format
msgid "Bootloader installation"
msgstr "Instalacija startera"

#: any.pm:227 any.pm:253 help.pm:768
#, c-format
msgid "Boot device"
msgstr "Startni (boot) uređaj"

#: any.pm:229
#, c-format
msgid "Delay before booting default image"
msgstr "Pauza pre startanja default image-a"

#: any.pm:230 help.pm:768
#, c-format
msgid "Enable ACPI"
msgstr "Omogući ACPI"

#: any.pm:232 help.pm:768
#, fuzzy, c-format
msgid "Force no APIC"
msgstr "Obavezno No APIC"

#: any.pm:234
#, fuzzy, c-format
msgid "Force No Local APIC"
msgstr "Obavezno No APIC"

#: any.pm:236 any.pm:558 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1161 network/netconnect.pm:575
#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1494
#: standalone/drakbackup:1717 standalone/drakbackup:3592
#: standalone/drakups:278
#, c-format
msgid "Password"
msgstr "Lozinka"

#: any.pm:237 any.pm:559 install_steps_interactive.pm:1162
#, c-format
msgid "Password (again)"
msgstr "Lozinka (ponovite)"

#: any.pm:238
#, c-format
msgid "Restrict command line options"
msgstr "Ograničena komandna linika - opcije"

#: any.pm:238
#, c-format
msgid "restrict"
msgstr "ograničeno"

#: any.pm:240
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Očisti /tmp pri svakom startanju"

#: any.pm:241
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Definiši veličinu RAM ako je potrebno (detektovano je %d MB)"

#: any.pm:243
#, c-format
msgid "Enable multiple profiles"
msgstr "Omogući multi-profile"

#: any.pm:252
#, c-format
msgid "Init Message"
msgstr "Inicijalna poruka"

#: any.pm:254
#, c-format
msgid "Open Firmware Delay"
msgstr "Otpočni Firmware pauzu"

#: any.pm:255
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Pauza pri startanju kernela"

#: any.pm:256
#, c-format
msgid "Enable CD Boot?"
msgstr "Omogući startanje sa CD-a?"

#: any.pm:257
#, c-format
msgid "Enable OF Boot?"
msgstr "Omogući OF startanje?"

#: any.pm:258
#, c-format
msgid "Default OS?"
msgstr "Podrazumevani OS ?"

#: any.pm:302
#, c-format
msgid "Image"
msgstr "Slika"

#: any.pm:303 any.pm:312
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:304 any.pm:325
#, c-format
msgid "Append"
msgstr "Dodatak"

#: any.pm:306
#, c-format
msgid "Video mode"
msgstr "Video mod"

#: any.pm:308
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:317 any.pm:322 any.pm:324
#, c-format
msgid "Label"
msgstr "Oznaka"

#: any.pm:319 any.pm:329 harddrake/v4l.pm:255 standalone/drakfloppy:88
#: standalone/drakfloppy:94
#, c-format
msgid "Default"
msgstr "Podrazumevano"

#: any.pm:326
#, c-format
msgid "Initrd-size"
msgstr "Initrd-veličina"

#: any.pm:328
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:339
#, c-format
msgid "Empty label not allowed"
msgstr "Prazna oznaka nije dozvoljena"

#: any.pm:340
#, c-format
msgid "You must specify a kernel image"
msgstr "Morate specificirati kernelov image"

#: any.pm:340
#, c-format
msgid "You must specify a root partition"
msgstr "Morate odrediti root particiju"

#: any.pm:341
#, c-format
msgid "This label is already used"
msgstr "Ova oznaka je već u upotrebi"

#: any.pm:354
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Koju vrstu unosa dodajete ?"

#: any.pm:355
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:355
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Drugi OS-ovi (SunOS,BSD,...)"

#: any.pm:356
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Drugi OS-ovi (MacOS,BSD,...)"

#: any.pm:356
#, c-format
msgid "Other OS (windows...)"
msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"

#: any.pm:384
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Ovo su postavljne opcije.\n"
"Možete dodati nove ili izmeniti stare."

#: any.pm:516
#, c-format
msgid "access to X programs"
msgstr "pristup X programima"

#: any.pm:517
#, c-format
msgid "access to rpm tools"
msgstr "pristup rpm alatima"

#: any.pm:518
#, c-format
msgid "allow \"su\""
msgstr "dozvoli \"su\""

#: any.pm:519
#, c-format
msgid "access to administrative files"
msgstr "pristup administrativnim fajlovima"

#: any.pm:520
#, c-format
msgid "access to network tools"
msgstr "pristup mrežnim alatima"

#: any.pm:521
#, c-format
msgid "access to compilation tools"
msgstr "pristup alatima za kompajliranje"

#: any.pm:527
#, c-format
msgid "(already added %s)"
msgstr "(%s već postoji)"

#: any.pm:532
#, c-format
msgid "This password is too simple"
msgstr "Ova lozinka je previše prosta"

#: any.pm:533
#, c-format
msgid "Please give a user name"
msgstr "Odredite korisničko ime"

#: any.pm:534
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Korisničko ime može sadržati samo mala slova, brojeve, `-' i `_'"

#: any.pm:535
#, c-format
msgid "The user name is too long"
msgstr "Korisničko ime već je predugačko"

#: any.pm:536
#, c-format
msgid "This user name has already been added"
msgstr "Ovo korisničko ime već postoji"

#: any.pm:540
#, c-format
msgid "Add user"
msgstr "Dodaj korisnika"

#: any.pm:541
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Unesi korisnika\n"
"%s"

#: any.pm:544 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158
#: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544
#: interactive/http.pm:152 printer/printerdrake.pm:165
#: printer/printerdrake.pm:352 printer/printerdrake.pm:4076
#: standalone/drakbackup:2802 standalone/scannerdrake:636
#: standalone/scannerdrake:786
#, c-format
msgid "Done"
msgstr "Urađeno"

#: any.pm:545 help.pm:52
#, c-format
msgid "Accept user"
msgstr "Prihvati korisnika"

#: any.pm:556
#, c-format
msgid "Real name"
msgstr "Pravo ime"

#: any.pm:557 help.pm:52 printer/printerdrake.pm:1373
#: printer/printerdrake.pm:1493
#, c-format
msgid "User name"
msgstr "Korisničko ime"

#: any.pm:560
#, c-format
msgid "Shell"
msgstr "Shell"

#: any.pm:562
#, c-format
msgid "Icon"
msgstr "Ikona"

#: any.pm:603 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Auto logovanje"

#: any.pm:604
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Ja mogu podesti vaš računar da automatski uloguje jednog korisnika."

#: any.pm:605 help.pm:52
#, c-format
msgid "Do you want to use this feature?"
msgstr "Da li želite da koristite ovu opciju ?"

#: any.pm:606
#, c-format
msgid "Choose the default user:"
msgstr "Izaberite default (osnovnog) korisnika:"

#: any.pm:607
#, c-format
msgid "Choose the window manager to run:"
msgstr "Izaberite menadžer prozora koji želite da koristite:"

#: any.pm:619
#, c-format
msgid "Please choose a language to use."
msgstr "Izaberite koji jezik želite da korisitite."

#: any.pm:640
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Možete izabrati drugi jezik koji će biti dostupan posle instalacije "

#: any.pm:658 help.pm:660
#, c-format
msgid "Use Unicode by default"
msgstr "Koristi Unicode po default-u"

#: any.pm:659 help.pm:660
#, c-format
msgid "All languages"
msgstr "Svi jezici"

#: any.pm:695 help.pm:581 help.pm:991 install_steps_interactive.pm:901
#, c-format
msgid "Country / Region"
msgstr "Zemlja"

#: any.pm:696
#, c-format
msgid "Please choose your country."
msgstr "Izaberite svoju zemlju."

#: any.pm:698
#, c-format
msgid "Here is the full list of available countries"
msgstr "Ovde je predstavljena cela lista dostupnih zemalja"

#: any.pm:699 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621
#: help.pm:991 install_steps_interactive.pm:114
#, c-format
msgid "More"
msgstr "Još"

#: any.pm:830
#, c-format
msgid "No sharing"
msgstr "Nema zajedničkog deljenja"

#: any.pm:830
#, c-format
msgid "Allow all users"
msgstr "Dozvoli sve korisnike"

#: any.pm:834
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Da li bi želeli da dozvolite korisnicima zajednički dele neke od svojih "
"direktorijuma?\n"
"Da bi ovo mogli da omogućite jednostavno kliknite na \"Share\" u konqueror-u "
"ili nautilus-u.\n"
"\n"
"\"Custom\" dozvoljava detaljnija per-user podešavanja.\n"

#: any.pm:850
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Možete eksportovati koristeći NFS ili Samba-u. Koji od ova dva želite"

#: any.pm:858
#, fuzzy, c-format
msgid "The package %s is going to be removed."
msgstr "Sledeći paketi će biti izbrisani"

#: any.pm:870
#, c-format
msgid "Launch userdrake"
msgstr "Pokreni userdrake"

#: any.pm:872
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"per-user deljenje resursa koristi grupu \"fileshare\". \n"
"Vi pomoću userdrake-a možete dodati korisnika u ovu grupu."

#: authentication.pm:12
#, c-format
msgid "Local files"
msgstr "Lokalne datoteke"

#: authentication.pm:12
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:12
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:12 authentication.pm:50
#, c-format
msgid "Windows Domain"
msgstr "Windows Domen"

#: authentication.pm:33
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP Autentifikacija"

#: authentication.pm:34
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: authentication.pm:35
#, c-format
msgid "LDAP Server"
msgstr "LDAP Server"

#: authentication.pm:40
#, c-format
msgid "Authentication NIS"
msgstr "NIS Autentifikacija"

#: authentication.pm:41
#, c-format
msgid "NIS Domain"
msgstr "NIS Domen"

#: authentication.pm:42
#, c-format
msgid "NIS Server"
msgstr "NIS Server"

#: authentication.pm:47
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Da bi ovo radilo sa W2K PDC, verovatno ćete morati da kao admin pokrenete: C:"
"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add i da "
"restartujete server.\n"
"Takože ćete morati da imate username/password za  Domain Admin da bi "
"pristupili mašini koja ima Windows(TM) domen.\n"
"Ukoliko mreža još uvek nije omogućena, Drakx će pokušati da pristupi domenu "
"nakon podešavanja mreže.\n"
"Ukoliko ovo podešavanje ne uspe iz nekog razloga i atuentifikacija domena ne "
"radi, pokrenite 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći vaš Windows"
"(tm) Domen, i Admin Username/Password, nakon startanja sistema.\n"
"Komanda 'wbinfo -t' će testirati da li vaša autentifikacija dobra."

#: authentication.pm:49
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentifikacija Windows Domena"

#: authentication.pm:51
#, c-format
msgid "Domain Admin User Name"
msgstr "Admin Korisničko ime Domena"

#: authentication.pm:52
#, c-format
msgid "Domain Admin Password"
msgstr "Admin Lozinka domena"

#: authentication.pm:83
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Nije moguć prenos bez NIS domena"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:532
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Dobrodosli u menadzer za startanje operativnih sistema !\n"
"\n"
"Izaberite operativni sistem, ili\n"
"sacekate za startanje pretpostavljenog OS.\n"

#: bootloader.pm:663
#, c-format
msgid "SILO"
msgstr "SILO"

#: bootloader.pm:665 help.pm:768
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO sa grafičkim menijem"

#: bootloader.pm:666 help.pm:768
#, c-format
msgid "LILO with text menu"
msgstr "LILO sa tekstualnim menijem"

#: bootloader.pm:668
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:670
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:1143
#, c-format
msgid "not enough room in /boot"
msgstr "nema dovoljno mesta u /boot"

#: bootloader.pm:1171
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Ne možete da instalirate starter na particiju %s\n"

#: bootloader.pm:1215
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1222
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1223
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Instaliraj starter"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d minuta"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 minut"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d sekundi"

#: common.pm:197
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Ne mogu da napravim snimak pre particioniranja"

#: common.pm:204
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Snimci će biti dostupni nakon instalacije u %s"

#: common.pm:269
#, c-format
msgid "kdesu missing"
msgstr "nedostaje kdesu"

#: common.pm:272
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper nedostaje"

#: crypto.pm:14 crypto.pm:28 lang.pm:238 network/adsl_consts.pm:44
#: network/adsl_consts.pm:55 network/adsl_consts.pm:65
#: network/adsl_consts.pm:75 network/adsl_consts.pm:86
#: network/adsl_consts.pm:97 network/adsl_consts.pm:107
#: network/adsl_consts.pm:117 network/adsl_consts.pm:264
#: network/netconnect.pm:46
#, c-format
msgid "France"
msgstr "Francuska"

#: crypto.pm:15 lang.pm:214
#, c-format
msgid "Costa Rica"
msgstr "Kostarika"

#: crypto.pm:16 crypto.pm:29 lang.pm:186 network/adsl_consts.pm:26
#: network/adsl_consts.pm:36 network/netconnect.pm:49
#, c-format
msgid "Belgium"
msgstr "Belgija"

#: crypto.pm:17 crypto.pm:30 lang.pm:219
#, c-format
msgid "Czech Republic"
msgstr "Češka"

#: crypto.pm:18 crypto.pm:31 lang.pm:220 network/adsl_consts.pm:134
#: network/adsl_consts.pm:142
#, c-format
msgid "Germany"
msgstr "Nemačka"

#: crypto.pm:19 crypto.pm:32 lang.pm:251
#, c-format
msgid "Greece"
msgstr "Grčka"

#: crypto.pm:20 crypto.pm:33 lang.pm:324
#, c-format
msgid "Norway"
msgstr "Norveška"

#: crypto.pm:21 crypto.pm:34 lang.pm:353 network/adsl_consts.pm:240
#, c-format
msgid "Sweden"
msgstr "Švedska"

#: crypto.pm:22 crypto.pm:36 lang.pm:323 network/adsl_consts.pm:178
#: network/netconnect.pm:47
#, c-format
msgid "Netherlands"
msgstr "Holandija"

#: crypto.pm:23 crypto.pm:37 lang.pm:271 network/adsl_consts.pm:158
#: network/adsl_consts.pm:168 network/netconnect.pm:48 standalone/drakxtv:45
#, c-format
msgid "Italy"
msgstr "Italija"

#: crypto.pm:24 crypto.pm:38 lang.pm:179 network/adsl_consts.pm:20
#, c-format
msgid "Austria"
msgstr "Austrija"

#: crypto.pm:35 crypto.pm:65 lang.pm:387 network/netconnect.pm:50
#, c-format
msgid "United States"
msgstr "SAD"

#: diskdrake/dav.pm:19
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV je protokol koji vam omogućava da montirate direktorijum veb servera\n"
"lokalno, i da ga tretirate kao lokalni fajl sistem (dostupni veb server je\n"
"podešen kao WebDAV server). Ukoliko želite da dodate novu WebDAV tačku\n"
"montiranja, izaberite \"Novi\"."

#: diskdrake/dav.pm:27
#, c-format
msgid "New"
msgstr "Novi"

#: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Demontiraj"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Montiraj"

#: diskdrake/dav.pm:65 help.pm:137
#, c-format
msgid "Server"
msgstr "Server"

#: diskdrake/dav.pm:66 diskdrake/interactive.pm:408
#: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Tačka montiranja"

#: diskdrake/dav.pm:85
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Unesite URL WebDAV servera"

#: diskdrake/dav.pm:89
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL mora počinjati sa http:// ili https://"

#: diskdrake/dav.pm:111
#, c-format
msgid "Server: "
msgstr "Server:"

#: diskdrake/dav.pm:112 diskdrake/interactive.pm:469
#: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225
#, c-format
msgid "Mount point: "
msgstr "Tačka montiranja: "

#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233
#, c-format
msgid "Options: %s"
msgstr "Opcije: %s"

#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995
#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065
#, c-format
msgid "Read carefully!"
msgstr "PAŽLJIVO PROČITAJ !"

#: diskdrake/hd_gtk.pm:96
#, c-format
msgid "Please make a backup of your data first"
msgstr "Molim vas, prvo napravite kopiju vaših podataka"

#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
"sektorana početku \n"
"diska)"

#: diskdrake/hd_gtk.pm:156 help.pm:544
#, c-format
msgid "Wizard"
msgstr "čarobnjak (pomoćnik)"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid "Choose action"
msgstr "Izaberite akciju"

#: diskdrake/hd_gtk.pm:193
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vi imate jednu veliku Microsoft Windows particiju.\n"
"Predlažem da prvo izmenite veličnu (resize) te particije (kliknite na nju,\n"
"a potom na \"Promeni veličinu\")"

#: diskdrake/hd_gtk.pm:195
#, c-format
msgid "Please click on a partition"
msgstr "Kliknite na particiju"

#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:477
#: standalone/drakbackup:3040 standalone/drakbackup:3102
#, c-format
msgid "Details"
msgstr "Detalji"

#: diskdrake/hd_gtk.pm:255
#, c-format
msgid "No hard drives found"
msgstr "Nije pronađen hard disk"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:329 mouse.pm:167
#: services.pm:164 standalone/drakbackup:1673 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Drugo"

#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165
#, c-format
msgid "Empty"
msgstr "Prazno"

#: diskdrake/hd_gtk.pm:331
#, c-format
msgid "Filesystem types:"
msgstr "Vrsta fajl sistema:"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``%s'' instead"
msgstr "Umesto toga probajte ``%s''"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353
#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569
#: diskdrake/removable.pm:26 diskdrake/removable.pm:49
#: standalone/harddrake2:67
#, c-format
msgid "Type"
msgstr "Tip"

#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431
#, c-format
msgid "Create"
msgstr "Kreiraj"

#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418
#: standalone/drakperm:124 standalone/printerdrake:231
#, c-format
msgid "Delete"
msgstr "Obriši"

#: diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Prvo uradite ``Demontiraj''"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose another partition"
msgstr "Izaberite drugu particiju"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose a partition"
msgstr "Izaberite particiju"

#: diskdrake/interactive.pm:208
#, c-format
msgid "Exit"
msgstr "Izlaz"

#: diskdrake/interactive.pm:241 help.pm:544
#, c-format
msgid "Undo"
msgstr "Poništi radnju"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to normal mode"
msgstr "Pređi na normalni mod"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to expert mode"
msgstr "Pređi na ekspert mod"

#: diskdrake/interactive.pm:260
#, c-format
msgid "Continue anyway?"
msgstr "Svejedno nastaviti ?"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without saving"
msgstr "Kraj bez snimanja promena"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Kraj bez snimanja promena u tabele particija?"

#: diskdrake/interactive.pm:270
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Da li hoćete da sačuvate izmene u /etc/fstab?"

#: diskdrake/interactive.pm:277 install_steps_interactive.pm:301
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Treba da resetujete mašinu za primenu izmena u tabeli particija"

#: diskdrake/interactive.pm:290 help.pm:544
#, c-format
msgid "Clear all"
msgstr "Očisti sve"

#: diskdrake/interactive.pm:291 help.pm:544
#, c-format
msgid "Auto allocate"
msgstr "Auto dislociranje"

#: diskdrake/interactive.pm:297
#, c-format
msgid "Hard drive information"
msgstr "Informacije o hard disku"

#: diskdrake/interactive.pm:329
#, c-format
msgid "All primary partitions are used"
msgstr "Sve primarne particije su zauzete"

#: diskdrake/interactive.pm:330
#, c-format
msgid "I can't add any more partitions"
msgstr "Ne mogu dodati više ni jednu particiju"

#: diskdrake/interactive.pm:331
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Da bi omogućili kreiranje još (extended) particija izbrišite jednu od "
"postojećih"

#: diskdrake/interactive.pm:342 help.pm:544
#, c-format
msgid "Save partition table"
msgstr "Sačuvaj tabelu particija"

#: diskdrake/interactive.pm:343 help.pm:544
#, c-format
msgid "Restore partition table"
msgstr "Obnovi tabelu particija"

#: diskdrake/interactive.pm:344 help.pm:544
#, c-format
msgid "Rescue partition table"
msgstr "Spasi tabelu particija"

#: diskdrake/interactive.pm:346 help.pm:544
#, c-format
msgid "Reload partition table"
msgstr "Ponovo učitaj tabelu particija"

#: diskdrake/interactive.pm:348
#, c-format
msgid "Removable media automounting"
msgstr "Automontiranje prenosivog medija"

#: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377
#, c-format
msgid "Select file"
msgstr "Izaberite datoteku"

#: diskdrake/interactive.pm:364
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Pohranjena(snimljena) tabela particija nije iste veličine\n"
"Želite da nastavite ?"

#: diskdrake/interactive.pm:378 harddrake/sound.pm:226 keyboard.pm:314
#: network/netconnect.pm:338 network/netconnect.pm:451
#: network/netconnect.pm:470 network/netconnect.pm:655
#: printer/printerdrake.pm:936 printer/printerdrake.pm:1891
#: printer/printerdrake.pm:1953 printer/printerdrake.pm:1987
#: printer/printerdrake.pm:2291 printer/printerdrake.pm:3149
#: printer/printerdrake.pm:3426 printer/printerdrake.pm:3545
#: printer/printerdrake.pm:4543 standalone/drakTermServ:352
#: standalone/drakTermServ:1083 standalone/drakTermServ:1139
#: standalone/drakTermServ:1802 standalone/drakbackup:580
#: standalone/drakbackup:678 standalone/drakboot:156 standalone/drakclock:212
#: standalone/drakconnect:908 standalone/drakfloppy:295 standalone/drakups:27
#: standalone/scannerdrake:50 standalone/scannerdrake:908
#, c-format
msgid "Warning"
msgstr "Upozorenje"

#: diskdrake/interactive.pm:379
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Ubacite disketu u uređaj\n"
"Svi podaci na disketi će biti izbrisani !"

#: diskdrake/interactive.pm:390
#, c-format
msgid "Trying to rescue partition table"
msgstr "Spasavanje tabele particija"

#: diskdrake/interactive.pm:396
#, c-format
msgid "Detailed information"
msgstr "Detaljne informacije"

#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706
#, c-format
msgid "Resize"
msgstr "Promeni veličinu"

#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774
#, c-format
msgid "Move"
msgstr "Premesti"

#: diskdrake/interactive.pm:413
#, c-format
msgid "Format"
msgstr "Formatiranje"

#: diskdrake/interactive.pm:415
#, c-format
msgid "Add to RAID"
msgstr "Dodaj na RAID"

#: diskdrake/interactive.pm:416
#, c-format
msgid "Add to LVM"
msgstr "Dodaj na LVM"

#: diskdrake/interactive.pm:419
#, c-format
msgid "Remove from RAID"
msgstr "Ukloni sa RAID-a"

#: diskdrake/interactive.pm:420
#, c-format
msgid "Remove from LVM"
msgstr "Ukloni sa LVM-a"

#: diskdrake/interactive.pm:421
#, c-format
msgid "Modify RAID"
msgstr "Promeni RAID"

#: diskdrake/interactive.pm:422
#, c-format
msgid "Use for loopback"
msgstr "Koristi za loopback"

#: diskdrake/interactive.pm:462
#, c-format
msgid "Create a new partition"
msgstr "Kreiraj novu particiju"

#: diskdrake/interactive.pm:465
#, c-format
msgid "Start sector: "
msgstr "Početni sektor: "

#: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876
#, c-format
msgid "Size in MB: "
msgstr "Veličina u MB:"

#: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877
#, c-format
msgid "Filesystem type: "
msgstr "Vrsta tatotečnog sistema:"

#: diskdrake/interactive.pm:473
#, c-format
msgid "Preference: "
msgstr "Karakteristike: "

#: diskdrake/interactive.pm:476
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "Lokalna mera"

#: diskdrake/interactive.pm:505
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Vi ne možete da kreirate novu particiju\n"
"(pošto ste dosegli maksimalan broj primarnih particija).\n"
"Prvo uklonite primarnu particiju a zatim kreirajte extended particiju."

#: diskdrake/interactive.pm:535
#, c-format
msgid "Remove the loopback file?"
msgstr "Ukloni loopback fajl ?"

#: diskdrake/interactive.pm:554
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Posle promene tipa particije %s, svi podaci na ovoj particiji će biti "
"izbrisani"

#: diskdrake/interactive.pm:565
#, c-format
msgid "Change partition type"
msgstr "Promena tipa particije"

#: diskdrake/interactive.pm:566 diskdrake/removable.pm:48
#, c-format
msgid "Which filesystem do you want?"
msgstr "Koju  datotečni sistem želite ?"

#: diskdrake/interactive.pm:574
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Menjam ext2 na ext3"

#: diskdrake/interactive.pm:603
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Gde biste da montirate loopback fajl %s?"

#: diskdrake/interactive.pm:604
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Gde biste da montirate %s uređaj ?"

#: diskdrake/interactive.pm:609
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Demontiranje nije moguće,jer se particija korisiti za loop back.\n"
"Prvo uklonite loopback"

#: diskdrake/interactive.pm:634
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Gde biste da montirate %s uređaj ?"

#: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738
#: install_interactive.pm:156 install_interactive.pm:186
#, c-format
msgid "Resizing"
msgstr "Promena veličine (resizing)"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Proračunavam granice FAT datotečnog sistema"

#: diskdrake/interactive.pm:694
#, c-format
msgid "This partition is not resizeable"
msgstr "Ovoj particici nije moguće promeniti veličinu"

#: diskdrake/interactive.pm:699
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Svi podaci na ovoj particiji bi trebali biti sačuvani"

#: diskdrake/interactive.pm:701
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Posle promene veličine %s particije svi podaci će biti izbrisani"

#: diskdrake/interactive.pm:706
#, c-format
msgid "Choose the new size"
msgstr "Izaberite novu veličinu"

#: diskdrake/interactive.pm:707
#, c-format
msgid "New size in MB: "
msgstr "Nova veličina u MB:"

#: diskdrake/interactive.pm:751 install_interactive.pm:194
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Da bi osigurali integritet nakon promene veličine particije(a), \n"
"provera fajl sistema će biti pokrenuta kada se sledeći put ulogujete u "
"Windows(TM)"

#: diskdrake/interactive.pm:775
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Koji disk želite da premestite?"

#: diskdrake/interactive.pm:776
#, c-format
msgid "Sector"
msgstr "Sektor"

#: diskdrake/interactive.pm:777
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Gde želite da instalirate starter?"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving"
msgstr "Premeštanje"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving partition..."
msgstr "Premeštanje particije..."

#: diskdrake/interactive.pm:802
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Izaberi postojeći RAID za dodavanje"

#: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820
#, c-format
msgid "new"
msgstr "novi"

#: diskdrake/interactive.pm:818
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Izaberi postojeći LVM za dodavanje"

#: diskdrake/interactive.pm:824
#, c-format
msgid "LVM name?"
msgstr "LVM ime?"

#: diskdrake/interactive.pm:861
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Ova particija ne može biti korišćena za loopback "

#: diskdrake/interactive.pm:874
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:875
#, c-format
msgid "Loopback file name: "
msgstr "Ime Loopback datoteke: "

#: diskdrake/interactive.pm:880
#, c-format
msgid "Give a file name"
msgstr "Odredite ime fajla"

#: diskdrake/interactive.pm:883
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Fajl se već koristi od strane drugog loopback-a,izaberite drugi"

#: diskdrake/interactive.pm:884
#, c-format
msgid "File already exists. Use it?"
msgstr "Datoteka već postoji.Da li da ga koristim ?"

#: diskdrake/interactive.pm:907
#, c-format
msgid "Mount options"
msgstr "Opcije montiranja"

#: diskdrake/interactive.pm:914
#, c-format
msgid "Various"
msgstr "Razno"

#: diskdrake/interactive.pm:978
#, c-format
msgid "device"
msgstr "uređaj"

#: diskdrake/interactive.pm:979
#, c-format
msgid "level"
msgstr "nivo"

#: diskdrake/interactive.pm:980
#, c-format
msgid "chunk size"
msgstr "chunk veličina"

#: diskdrake/interactive.pm:996
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "PAŽLJIVO,ova operacija je opasna."

#: diskdrake/interactive.pm:1011
#, c-format
msgid "What type of partitioning?"
msgstr "Koju vrstu particioniranja?"

#: diskdrake/interactive.pm:1027
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Paket %s je potreban. Da li želite da ga instalirate?"

#: diskdrake/interactive.pm:1056
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Morate restartovati računar da bi se izmene izvršile"

#: diskdrake/interactive.pm:1065
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"

#: diskdrake/interactive.pm:1078
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Posle formatiranja particije %s,svi podaci na ovoj particiji će biti "
"izbrisani"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Move files to the new partition"
msgstr "Premesti fajlove na novu particiju"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Hide files"
msgstr "Sakrij fajlove"

#: diskdrake/interactive.pm:1096
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktorijum %s već sadrži neke podatke\n"
"(%s)"

#: diskdrake/interactive.pm:1107
#, c-format
msgid "Moving files to the new partition"
msgstr "Premeštanje fajlova na novu particiju"

#: diskdrake/interactive.pm:1111
#, c-format
msgid "Copying %s"
msgstr "Kopiranje %s"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Removing %s"
msgstr "Uklanjanje: %s"

#: diskdrake/interactive.pm:1129
#, c-format
msgid "partition %s is now known as %s"
msgstr "particija %s je sada poznata kao %s"

#: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210
#, c-format
msgid "Device: "
msgstr "Uređaj: "

#: diskdrake/interactive.pm:1151
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"

#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Type: "
msgstr "Unesi: "

#: diskdrake/interactive.pm:1159 install_steps_gtk.pm:341
#, c-format
msgid "Name: "
msgstr "Ime: "

#: diskdrake/interactive.pm:1167
#, c-format
msgid "Start: sector %s\n"
msgstr "Početak: sektor %s\n"

#: diskdrake/interactive.pm:1168
#, c-format
msgid "Size: %s"
msgstr "Veličina: %s"

#: diskdrake/interactive.pm:1170
#, c-format
msgid ", %s sectors"
msgstr ", %s sektora"

#: diskdrake/interactive.pm:1172
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindar %d do %d\n"

#: diskdrake/interactive.pm:1173
#, c-format
msgid "Number of logical extents: %d"
msgstr ""

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Formatted\n"
msgstr "Formatirano\n"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Not formatted\n"
msgstr "Nije formatirano\n"

#: diskdrake/interactive.pm:1176
#, c-format
msgid "Mounted\n"
msgstr "Montirano\n"

#: diskdrake/interactive.pm:1177
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: diskdrake/interactive.pm:1179
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback fajl(ovi): \n"
"   %s\n"

#: diskdrake/interactive.pm:1180
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Boot particija po default-u\n"
"   (za podizanje MS-DOSa, ne za lilo)\n"

#: diskdrake/interactive.pm:1182
#, c-format
msgid "Level %s\n"
msgstr "Nivo %s\n"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Chunk size %s\n"
msgstr "Chunk-uj %s\n"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskovi %s\n"

#: diskdrake/interactive.pm:1186
#, c-format
msgid "Loopback file name: %s"
msgstr "Ime Loopback datoteke: %s"

#: diskdrake/interactive.pm:1189
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Najverovatnije je, da je ova particija\n"
"Driver particija, pa ne bi trebali\n"
"da je dirate.\n"

#: diskdrake/interactive.pm:1192
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ovo je specijalna Bootstrap\n"
"particija i koristi se\n"
"dual-booting vašeg sistema.\n"

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Read-only"
msgstr "Samo-čitanje"

#: diskdrake/interactive.pm:1212
#, c-format
msgid "Size: %s\n"
msgstr "Veličina: %s\n"

#: diskdrake/interactive.pm:1213
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"

#: diskdrake/interactive.pm:1214
#, c-format
msgid "Info: "
msgstr "Info: "

#: diskdrake/interactive.pm:1215
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskovi %s\n"

#: diskdrake/interactive.pm:1216
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tip tabele particija: %s\n"

#: diskdrake/interactive.pm:1217
#, c-format
msgid "on channel %d id %d\n"
msgstr "na kanalu %d ID %d\n"

#: diskdrake/interactive.pm:1250
#, c-format
msgid "Filesystem encryption key"
msgstr "Ključ za enkripciju fajl sistema"

#: diskdrake/interactive.pm:1251
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Izaberite ključ za enkripciju fajl sistema"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Ova lozinka(enkripcioni ključ) je suviše jednostavna (treba da ima bar %d "
"znakova)"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "The encryption keys do not match"
msgstr "Nepodudarnost enkripcionih ključeva (lozinki)"

#: diskdrake/interactive.pm:1258 network/netconnect.pm:987
#: standalone/drakconnect:393
#, c-format
msgid "Encryption key"
msgstr "Ključ za enkripciju"

#: diskdrake/interactive.pm:1259
#, c-format
msgid "Encryption key (again)"
msgstr "Ključ za enkripciju (ponovo)"

#: diskdrake/removable.pm:47
#, c-format
msgid "Change type"
msgstr "Promena tipa"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Ne mogu da ulogujem korisničko ime %s (neispravna lozinka?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Potrebna Autentifikacija Domena"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Koje korisničko ime"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Još jedan"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Unesite svoje korisničko ime, lozinku i domen da bi mogli da pristupite "
"hostu."

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3591
#, c-format
msgid "Username"
msgstr "Korisničko ime"

#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domen"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Traži servere"

#: diskdrake/smbnfs_gtk.pm:210
#, fuzzy, c-format
msgid "Search new servers"
msgstr "Traži servere"

#: do_pkgs.pm:21
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket %s mora biti instaliran. Da li želite da ga instalirate?"

#: do_pkgs.pm:26
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Tekući paket %s nedostaje"

#: do_pkgs.pm:143
#, c-format
msgid "Installing packages..."
msgstr "Instaliram pakete..."

#: do_pkgs.pm:217
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Ukanjam %s ..."

#: fs.pm:409
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs.pm:412
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs.pm:415
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs.pm:417
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs.pm:421
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs.pm:425
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs.pm:427
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs.pm:431
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs.pm:439
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs.pm:441
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs.pm:581 fs.pm:591 fs.pm:595 fs.pm:599 fs.pm:603 fs.pm:607 swap.pm:12
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s Formatiranje  %s nije uspelo"

#: fs.pm:648
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ne znam kako da formatiram %s u tipu %s"

#: fs.pm:655 fs.pm:662
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiranje particije %s"

#: fs.pm:659
#, c-format
msgid "Creating and formatting file %s"
msgstr "Kreiranje i formatiranje datoteke %s"

#: fs.pm:719 fs.pm:772
#, c-format
msgid "Mounting partition %s"
msgstr "Montiram particiju %s"

#: fs.pm:720 fs.pm:773
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montiranje particije %s u direktorijum %s nije uspelo"

#: fs.pm:740 fs.pm:748
#, c-format
msgid "Checking %s"
msgstr "Proveravam %s"

#: fs.pm:789 partition_table.pm:638
#, c-format
msgid "error unmounting %s: %s"
msgstr "Greška pri demontiranju %s: %s"

#: fs.pm:821
#, c-format
msgid "Enabling swap partition %s"
msgstr "Omogućavam swap particiju %s"

#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr "jednostavno"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "sa /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "server"

#: fsedit.pm:254
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Ne mogu pročitati tabelu particija uređaj %s , mnogo je iskvarena za mene :"
"(\n"
"Pokušaću dalje zaobilazeći loše particijeMogu pokušati da formatiram loše "
"particije (SVI PODACI će biti izgubljeni !).\n"
"Drugo rešenje je da se DrakX onemogući da modufikuje tabelu particija.\n"
"(greška je %s)\n"
"\n"
"Da li se pristajete da izgubite sve particije?\n"

#: fsedit.pm:513
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Ne možete koristiti JFS za particije manje od 16MB"

#: fsedit.pm:514
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"

#: fsedit.pm:533
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Tačke montiranja moraju da počinju sa vodećim /"

#: fsedit.pm:534
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Tačke montiranja treba da sadrže samo alfanumeričke karaktere"

#: fsedit.pm:535
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Već postoji particija sa tačkom montiranja %s\n"

#: fsedit.pm:537
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Izabrali ste softversku RAID particiju kao root (/).\n"
"Nijedan starter ne može da radi sa tim bez /boot particije.\n"
"Zato treba da dodate /boot particiju"

#: fsedit.pm:540
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Ne možete koristiti logičku LVM particiju za tačku montiranja %s"

#: fsedit.pm:542
#, fuzzy, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Izabrali ste softversku RAID particiju kao root (/).\n"
"Nijedan starter ne može da radi sa tim bez /boot particije.\n"
"Zato treba da dodate /boot particiju"

#: fsedit.pm:545
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: fsedit.pm:548 fsedit.pm:550
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Ovaj direktorijum treba da ostane u root-u  datotečnog sistema"

#: fsedit.pm:552
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Potreban vam je pravi datotečni sistem (ext2/ext3, reiserfs, xfs, ili jfs) "
"za ovu tačku montiranja\n"

#: fsedit.pm:554
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Ne možete koristiti enkriptovani fajl sistem za tačku montiranja %s"

#: fsedit.pm:615
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Nema dovoljno slobodnog prostora za auto-alociranje"

#: fsedit.pm:617
#, c-format
msgid "Nothing to do"
msgstr "Nema šta da se uradi"

#: fsedit.pm:713
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Greška pri otvaranju %s za ispis: %s"

#: harddrake/data.pm:53
#, c-format
msgid "Floppy"
msgstr "Flopi"

#: harddrake/data.pm:54
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:55
#, c-format
msgid "Disk"
msgstr "Disk"

#: harddrake/data.pm:56
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:57
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD rezači"

#: harddrake/data.pm:58
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:59 standalone/drakbackup:2116
#, c-format
msgid "Tape"
msgstr "Traka"

#: harddrake/data.pm:60
#, c-format
msgid "Videocard"
msgstr "Video kartica"

#: harddrake/data.pm:61
#, c-format
msgid "Tvcard"
msgstr "TV kartica"

#: harddrake/data.pm:62
#, c-format
msgid "Other MultiMedia devices"
msgstr "Drugi multimedijalni uređaji"

#: harddrake/data.pm:63
#, c-format
msgid "Soundcard"
msgstr "Zvučna kartica"

#: harddrake/data.pm:64
#, c-format
msgid "Webcam"
msgstr "Veb kamera"

#: harddrake/data.pm:68
#, c-format
msgid "Processors"
msgstr "Procesori"

#: harddrake/data.pm:69
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Interna  ISDN kartica"

#: harddrake/data.pm:70
#, c-format
msgid "Ethernetcard"
msgstr "Mrežna kartica"

#: harddrake/data.pm:78 network/netconnect.pm:465 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:472
#: standalone/drakconnect:473 standalone/drakconnect:576
#, c-format
msgid "Modem"
msgstr "Modem"

#: harddrake/data.pm:79
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:81
#, fuzzy, c-format
msgid "AGP controllers"
msgstr "USB kontroleri"

#: harddrake/data.pm:82
#, c-format
msgid "Bridges and system controllers"
msgstr "Mostovi i sistemski kontroleri"

#: harddrake/data.pm:83 help.pm:203 help.pm:991
#: install_steps_interactive.pm:933 printer/printerdrake.pm:687
#: printer/printerdrake.pm:4175
#, c-format
msgid "Printer"
msgstr "Štampač"

#: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:926
#, c-format
msgid "Mouse"
msgstr "Miš"

#: harddrake/data.pm:90
#, c-format
msgid "Joystick"
msgstr "Džojstik"

#: harddrake/data.pm:92
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA kontroleri"

#: harddrake/data.pm:94
#, c-format
msgid "Firewire controllers"
msgstr "Firewire kontroleri"

#: harddrake/data.pm:95
#, c-format
msgid "SCSI controllers"
msgstr "SCSI kontroleri"

#: harddrake/data.pm:96
#, c-format
msgid "USB controllers"
msgstr "USB kontroleri"

#: harddrake/data.pm:97
#, c-format
msgid "SMBus controllers"
msgstr "SMBus kontroleri"

#: harddrake/data.pm:98
#, c-format
msgid "Scanner"
msgstr "Skener"

#: harddrake/data.pm:100 standalone/harddrake2:319
#, c-format
msgid "Unknown/Others"
msgstr "Nepoznati/Ostali"

#: harddrake/data.pm:114
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: harddrake/sound.pm:150 standalone/drakconnect:169
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Samo momenat... primena konfiguracije"

#: harddrake/sound.pm:186
#, c-format
msgid "No alternative driver"
msgstr "Nema alternativnog drajvera"

#: harddrake/sound.pm:187
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Ne postoji poznati alternativni OSS/ALSA drajver za vašu zvučnu karticu (%s) "
"koja trenutno koristi \"%s\""

#: harddrake/sound.pm:193
#, c-format
msgid "Sound configuration"
msgstr "Podešavanje zvuka"

#: harddrake/sound.pm:195
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Ovde možete izabrati alternativni drajver (ili OSS ili ALSA) za svoju zvučnu "
"karticu (%s)."

#: harddrake/sound.pm:197
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Vaša kartica trenutno koristi %s\"%s\" drajver (default drajver za vašu "
"karticu je \"%s\")"

#: harddrake/sound.pm:199
#, fuzzy, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Otvoreni Sistem za Zvuk)je bio prvu zvučni API. On je nezavisan zvučni "
"API u odnosu na operativni sistem(dostupan je na većini unices sistema) ali "
"je prilično rudimenaran i ograničen API.\n"
"Čak šta više, većina drajvera kao da ponovo otkirva točak \n"
"\n"
"ALSA (Advanced Linux Sound Architecture) je modularne arhitekture koji\n"
"podržava veliki broj ISA, USB i PCI kartica.\n"
"\n"
"On takođe obezbeđuje mnogo veći API u odnosu na  OSS.\n"
"\n"
"Da bi koristili alsa, možete koristi ili:\n"
"- stari kompatibilni OSS api\n"
"- novi ALSA api koji omogućava mnogo napredne mogućnosti ali zahteva "
"korišćenje ALSA biblioteke.\n"

#: harddrake/sound.pm:213 harddrake/sound.pm:293 standalone/drakups:134
#, c-format
msgid "Driver:"
msgstr "Drajver:"

#: harddrake/sound.pm:218
#, c-format
msgid "Trouble shooting"
msgstr "Pomoć "

#: harddrake/sound.pm:226
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Stari \"%s\" drajver je na crnoj listi.\n"
"\n"
"Prijavljeno je da opstruiše kernel pri restartovanju.\n"
"\n"
"Novi \"%s\" drajver će biti korišćen samo pri sledećem startanju sistema."

#: harddrake/sound.pm:234
#, c-format
msgid "No open source driver"
msgstr "Nema open source drajvera"

#: harddrake/sound.pm:235
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Ne postoji besplatan drajver za vašu zvučnu karticu (%s), ali postoji "
"licencirani drajver na \"%s\"."

#: harddrake/sound.pm:238
#, c-format
msgid "No known driver"
msgstr "Nema poznatog drajvera"

#: harddrake/sound.pm:239
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Ne postoji poznati drajver za vašu zvučnu karticu (%s)"

#: harddrake/sound.pm:243
#, c-format
msgid "Unknown driver"
msgstr "Nepoznati drajver"

#: harddrake/sound.pm:244
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Greška: drajver \"%s\" za  vašu zvučnu karticu nije prikazan"

#: harddrake/sound.pm:257
#, c-format
msgid "Sound trouble shooting"
msgstr "Pomoć za podešavanje zvuka"

#: harddrake/sound.pm:258
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Klasični tester zvuka treba da pokrene sledeće komande:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver vaša zvučna "
"kartica koristi \n"
"po default-u\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" će vam reći koji je drajver "
"trenutno\n"
"u upotrebi\n"
"\n"
"- \"/sbin/lsmod\" će vam omogućiti da proverite da li njegov je drajverov "
"modul\n"
"učitan ili nije\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" će\n"
"vam reći da li su server za zvuk i alsa podešeni za pokretanje u\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" će vam reći kakav je nivo jačine zvuka\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" će vam reći koji program koristi dzvučnu "
"karticu.\n"

#: harddrake/sound.pm:284
#, c-format
msgid "Let me pick any driver"
msgstr "Doozvoli da izaberem bilo koji uređaj"

#: harddrake/sound.pm:287
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Biram odgovarajući drajver"

#: harddrake/sound.pm:288
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Ukoliko zaista mislite da znate koji je pravi drajver za vašu karticu\n"
"možete izabrati jednu sa gornje liste.\n"
"\n"
"Trenutni drajver za vašu \"%s\" zvučnu karticu je \"%s\" "

#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "Auto-detekcija"

#: harddrake/v4l.pm:69 harddrake/v4l.pm:227
#, c-format
msgid "Unknown|Generic"
msgstr "Nepoznati|Generic"

#: harddrake/v4l.pm:102
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Nepoznati|CPH05X (bt878) [mnogi proizvođači]"

#: harddrake/v4l.pm:103
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Nepoznati|CPH06X (bt878) [mnogi proizvođači]"

#: harddrake/v4l.pm:289
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Za većinu modernih TV kartica, bttv modul GNU/Linux kernela jednostavno auto-"
"detektuje prave parametre.\n"
"Ukoliko je kartica pogrešno detektovana, ovde možete da podesite pravi "
"tjuner i tip kartice. Samo selektujte parametre za vašu TV karticu ako je "
"potrebno"

#: harddrake/v4l.pm:292
#, c-format
msgid "Card model:"
msgstr "Model kartice :"

#: harddrake/v4l.pm:293
#, c-format
msgid "Tuner type:"
msgstr "Tip tjunera :"

#: harddrake/v4l.pm:294
#, c-format
msgid "Number of capture buffers:"
msgstr "Broj capture buffera :"

#: harddrake/v4l.pm:294
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "broj capture buffer-a za mmap'ed capture"

#: harddrake/v4l.pm:296
#, c-format
msgid "PLL setting:"
msgstr "PLL opcije :"

#: harddrake/v4l.pm:297
#, c-format
msgid "Radio support:"
msgstr "Podrška za radio :"

#: harddrake/v4l.pm:297
#, c-format
msgid "enable radio support"
msgstr "omogući podršku za radio"

#: help.pm:11
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
"will reboot your computer."
msgstr ""
"Pre nego što nastavite pažljivo pročitajte uslove licence. Ona\n"
"pokriva celu Mandrakelinux distribuciju, i ukoliko se  slažete\n"
"sa svim uslovima koji se nalaze u njoj, kliknite na \"Prihvatam\" taster\n"
"Ukoliko ne prihvatate, jednostavno isključite \n"
"računar."

#: help.pm:14 install_steps_gtk.pm:598 install_steps_interactive.pm:88
#: install_steps_interactive.pm:690 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "Prihvati"

#: help.pm:17
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user who\n"
"can automatically log into the system when the computer boots up. If you\n"
"are interested in that feature (and do not care much about local security),\n"
"choose the desired user and window manager, then click \"%s\". If you are\n"
"not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux je višekorisnički sistem, a to znači da svaki korisnik može imati "
"sopstvene\n"
"postavke, sopstvene fajlove, itd. Možete pročitati ``Upustvo za korisnike''\n"
"da bi saznali više o tome. Ali za razliku od \"root\", koji je ustvari "
"administrator, korisnici\n"
"koje dodate ovde neće moći da menjaju bilo šta osim njihovih\n"
"fajlova i njihove konfiguracije. Trebalo bi da kreirate najmanje jednog\n"
"običnog korisnika za sebe. Taj račun je onaj na koji treba da se logujete \n"
"za rutinsko korišćenje. Iako je veoma praktično da se ulogujete kao \"root\" "
"svaki dan,\n"
"to može biti veoma opasno! I najmanja greška može značiti da vaš sistem\n"
"neće više raditi. Ukoliko napravite ozbiljne greške kao obični korisnik \n"
"možete jedino izbgubiti nešto informacija, ali ne i celi sistem.\n"
"\n"
"Prvo, morate da unesete vaše pravo ime. Ovo nije neophodno, naravno -\n"
"jer možete pristupiti i izmeniti ga kada god želite. DrakX će tada uzeti "
"prvu\n"
"reč koji ste uneli i staviti ga u prostor za unošenje imena korisnika "
"\"User\n"
"name\". Ovo je ime koje odreženi korisnik treba da koristi pri logovanju na\n"
"sistem. Možete ga promeniti. YNakon toga morate uneti lozinku ovde.\n"
"Obični, ne-privilegovani korisnička lozinka nije od većeg značaja kao ona "
"za\n"
"\"root\" koriosnika sa sigurnosne tačke gledanja, ali to nije razlog za "
"opuštanje\n"
"- nakon svega, vaši fajlovi su u pitanju.\n"
"\n"
"Ukoliko kliknete na \"Prihvati korisnikar\", možete dodati još korisnika. "
"Dodajte\n"
"korisnika za svakog vašeg prijatelja: za vašeg oca ili sestru, na\n"
"primer. Kada zaršite dodavanje svih željenih korisnika, izaberite \"Završeno"
"\".\n"
"\n"
"Klikom na taster Napredno \"Napredno opcije\" možete izmeniti default \"shell"
"\"\n"
"za trenutnog korisnika (bash po default). \n"
"\n"
"Kada završite sa dodavanjem korisnika, računar će tražiti da izaberete "
"korisnika\n"
"koji će se automatski prijavljivati na sistem pri njegovom startanju. "
"Ukoliko\n"
"vas zanima ova mogućnost (i ne vodite mnogo računa o lokalnoj\n"
"sigurnosti), izaberite željenog korisnika i window menažer, a zatim kliknite "
"na \"Sledeći\n"
"->\". Ukoliko niste zainteresovani za ovu opciju, deselektujte  \"Da li "
"želite\n"
"da koristite ovu opciju?\" ."

#: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005
#: install_steps_gtk.pm:277 interactive.pm:403 interactive/newt.pm:308
#: network/netconnect.pm:271 network/tools.pm:206 printer/printerdrake.pm:3090
#: standalone/drakTermServ:409 standalone/drakbackup:4199
#: standalone/drakbackup:4229 standalone/drakbackup:4251 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Sledeći "

#: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr "Napredno"

#: help.pm:55
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Iznad se nalazi lista postojećih Linux particija koje su detektovane\n"
"na hard disku. Možete zadržati izbor koji je napravio čarobnjak, jer je "
"dobar za a\n"
"opštu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
"particiju (\"/\"). Nemojte da birate suviše malu particiju jer nećete moći "
"da\n"
"instalirate ovoljno softvera. Ukoliko želite da podatke staviljate na "
"posebnu particiju ,\n"
"morate da izaberete i \"/home\" (moguće je ukoliko imate više od jedne\n"
"Linux particije).\n"
"\n"
"\n"
"Informacija: svaka particija je prikazana na sledeći način: \"Ime\", "
"\"Kapacitet\".\n"
"\n"
"\"Ime\" je kodirano na sledeći način: \"tip hard diska\", \"broj hard diska"
"\",\n"
"\"proj particije\" (na primer, \"hda1\").\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE uređaj i  \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Za IDE hard "
"diskove:\n"
"\n"
"   * \"a\" znači  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
"   * \"b\" znači \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
"   * \"c\" znači \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
"   * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"\n"
"Sa SCSI hard diskovima, a \"a\" znači \"primarni hard disk\", a \"b\" "
"znači \n"
"\"sekundarni hard disk \", itd..."

#: help.pm:86
#, fuzzy, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the correct CD as required."
msgstr ""
"Mandrakelinux instalacija se nalazi na nekoliko diskova iliti CDROM-ova. "
"DrakX\n"
"zna ukoliko da ukoliko je selktovani paket lociran na drugom CDROM-u i "
"izbaciće\n"
"trenutni CD te tražiti od vas da ubacite odgovarajući."

#: help.pm:91
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrakelinux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrakelinux sorts packages groups in four categories. You can\n"
"mix and match applications from the various categories, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' category installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups that are in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Sada je vreme da odredimo koje programe želite da instalirate na vaš\n"
"sistem. Postoje hiljade paketa dostupnih za instalaciju na Mandrakelinux, "
"i \n"
"da bi ih učinili dostupnijim, smeđteni su u grupe sličnih aplikacija.\n"
"\n"
"Paketi su sortirani u grupe u odnosu na odgovarajuću upotrebu na vašoj\n"
"mašini. Same grupe su sortirane u četiri klase. Ove klase možete posmatrati\n"
"kao kontejnere za različite pakete\n"
"Možete mešati aplikacije iz različitih kontejnera, tako da\n"
"iinstalacija ``Radna stanica'' može da sadrži aplikacije iz \n"
"kontejnera ``Razvojna stanica'' .\n"
"\n"
" * \"Radna stanica\": ukoliko planirate da koristite vašu mašinu kao radnu "
"stanicu, izaberite jednu ili više odgovarajućih grupa.\n"
"\n"
" * \"Razvojna stanica\": ukoliko mašina treba da se koristi za "
"programiranje, izaberite željenu(e) grupu(e).\n"
"\n"
" * \"Server\": ukoliko će se mašina koristiti kao server, moći ćete da \n"
"izaberete koje od najčešćih servisaželite da instalirate na\n"
"mašinu.\n"
"\n"
" * \"Grafičko Okruženje\": na kraju, ovde ćete izabrati vaše\n"
"omiljeno grafičko okruženje. Morate izabrati bar jedno da bi imali\n"
"grafičku radnu stanicu!\n"
"\n"
"Kretanjem kursora miša preko imena grupe dobićete kratko objašnjenje\n"
"o toj grupi. Ukoliko ne selektujete ni jednu grupu kada izvodite\n"
"osnovnu instalaciju (za razliku od ažuriranja), pojaviće se dijalog\n"
"sa različitim predlozima za minimalnu instalciju:\n"
"\n"
" * \"Sa X-ovima\": Instalira nekoliko paketa radi grafičkog desktopa\n"
"\n"
" * \"Sa osnovnom dokumentacijom\": Instalira osnovni sistem sa osnovnim "
"alatima\n"
"i njihovom dukumentacijom. Ovaj mod je praktičan za\n"
"podešavanje servera\n"
"\n"
" * \"Stvarno minimalna instalacija\":Instalira samo što je minimano "
"potrebno,\n"
"za rad Linux sistema,naravno samo u komandnoj liniji.Ova instalacija "
"zauzima\n"
"samo 65 Mb\n"
"\n"
"Možete selektovati i  \"Pojedinačno biranje paketa\", koje je korisno "
"ukoliko\n"
"su vam poznati ponuđeni paketi i želite da imate potpunu \n"
"kontrolu nad svim što će biti instalirano.\n"
"\n"
"Ukoliko ste pokrenuli mod \"Ažuriranje\",  možete deselektovati sve\n"
"grupe da bi izbegli instalaciju bilo kog novog paketa. Ovo je korisno za "
"popravljanje ili\n"
"ažuriranje postojećeg sistema."

#: help.pm:137
#, c-format
msgid "Workstation"
msgstr "Radna stanica"

#: help.pm:137
#, c-format
msgid "Development"
msgstr "Razvojna"

#: help.pm:137
#, c-format
msgid "Graphical Environment"
msgstr "Grafičko Okruženje"

#: help.pm:137 install_steps_interactive.pm:552
#, c-format
msgid "With X"
msgstr "Sa X-ovima"

#: help.pm:137
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "Sa osnovnom dokumentacijom (preporuka!)"

#: help.pm:137
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "Minimalno instaliraj"

#: help.pm:137 install_steps_gtk.pm:272 install_steps_interactive.pm:598
#, c-format
msgid "Individual package selection"
msgstr "Pojedinačno biranje paketa"

#: help.pm:137 help.pm:602
#, c-format
msgid "Upgrade"
msgstr "Ažuriranje"

#: help.pm:140
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each them such\n"
"that installation of one package requires that some other program is also\n"
"required to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Na kraju, u zavisnosti od vašeg izbora da da birate pojedinačne pakete\n"
"ili ne, biće vam prikazano stablo sa svim paketima klasifikovanim\n"
"po grupama i podgrupama. Dok pretražujete stablo, možete selektovati cele\n"
"grupe, podgrupe, ili individualne pakete.\n"
"\n"
"Kada kod selektujete paket na stablu, opis se pojavljuje sa desne\n"
"strane. da bi mogli da se upoznate namenom paketa.\n"
"\n"
"!! Ukoliko je server paket izabran slučajno ili kao deo\n"
"cele grupe, bićete upitani da li zaista želite da instalirate\n"
"ponuđene servere. Pod Mandrakelinux-om, svi instalirani\n"
"serveri se startuju po default-u za vreme podizanja sistema. Čak i ako su "
"sigurni i nemaju\n"
"poznatih bezbednosnih propusta do vremena izlaska distribucije, može se "
"desiti\n"
"da sigurnosne rupe budu otkivene kasnije.\n"
" Ukoliko ne znate koji pojedinačni servis šta treba da radi\n"
"ili zašto se instalira, onda kliknite \"Ne\". Klikom na \"Da\" ćete\n"
"instalirati prikazane servis i oni će biti pokrenuti automatski po\n"
"default-u. !!\n"
"\n"
"Opcija  \"Automatske međuzavisnosti\" jednostavno isključuje dijalog sa "
"upozorenjem\n"
"koji se javlja svaki put kada instaler automatski selektuje pakete. Ovo se\n"
"javlja zato što on određuje da mora da zadovolji zavisnosti sa drugim\n"
"paketom da bi uspešno završio instalaciju.\n"
"\n"
"Mala ikonica flopi diska na dnu liste vam omogućava da učitate\n"
"listu paketa birane tokom prethodne instalacije. Klikom na ovu ikonicu\n"
"će od vas biti traženo da ubacite disketu kreiranu ranije na kraju \n"
"prethodne instalacije. Pogledajte poslednji pasus (korak) da bi naučili kako "
"da kreirate \n"
"takvu disketu."

#: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:413
#: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:219
#: ugtk2.pm:1074 wizards.pm:156
#, c-format
msgid "No"
msgstr "Ne"

#: help.pm:172 help.pm:301 help.pm:457 install_any.pm:413 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:607 standalone/drakgw:288
#: standalone/drakgw:289 standalone/drakgw:297 standalone/drakgw:307
#: standalone/harddrake2:218 ugtk2.pm:1074 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Da"

#: help.pm:172
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:175
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrakelinux will attempt to auto-detect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"About Winmodem Connection. Winmodems are special integrated low-end modems\n"
"that require additional software to work compared to Normal modems. Some of\n"
"those modems actually work under Mandrakelinux, some others do not. You\n"
"can consult the list of supported modems at LinModems.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Sada treba da podesite vašu Internet/mrežnu konekciju. Ukoliko\n"
"želite da konektujete svoj kompjuter na Internet ili na lokalnu mrežu, "
"kliknite\n"
"\"Sledeći ->\". Nakon toga će se pokrenuti autodetekcija mrežnih uređaja i "
"modema. Ukoliko\n"
"ova autodetekcija ne uspe, deselektujte \"Koristi autodetekciju\" sledeći "
"put.Vi\n"
"takođe možete izabrati da ne podešavate mrežu sada , nego kasnije; u tom "
"slučaju,\n"
"jednostavno kliknite na taster \"Poništi\".\n"
"\n"
"Ovaj program nudi podešavanje Internet konekcije u\n"
"toku instalacije. Moguće konekcije su: tradicionalni modem, ISDN\n"
"modem, ADSL konekcija, kablovski modem, i na kraju jednostavna LAN "
"konekcija\n"
"(Ethernet).\n"
"\n"
"Ovde nećemo detaljno opisivati svaku konfiguraciju. Jednostavno proverite da "
"li imate\n"
"sve parametre, kao što su IP adresa, default gateway, DNS serveri, itd. \n"
"od vašeg Internet Provajdera ili sistemskog administratora.\n"
"\n"
"Možete konsultovati i deo upustva o Internet konekcijama ``Starter Guide'' "
"za detalje\n"
"o konfiguraciji, ili jednostavno sačekajte da vam se sistem instalira i\n"
"onda pokrenite program koji je tamo opisan za podešavanje vaše konekcije."

#: help.pm:197
#, c-format
msgid "Use auto detection"
msgstr "Koristi auto detekciju"

#: help.pm:200
#, fuzzy, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
"\"Štampač\": ako kliknete na taster \"Bez štampača\" pokrenuti ćete "
"konfiguracioni\n"
"program za štampače. Pogledajte i odgovoarajuće upustvo u``Starter\n"
"Guide'' za više informacija o tome kako da podesite novi štampač. Program "
"koje se\n"
"tada aktivira je sličan onom koji se koristi tokom instalacije."

#: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:648
#: standalone/drakbackup:2406 standalone/drakbackup:2414
#: standalone/drakbackup:2422 standalone/drakbackup:2430
#, c-format
msgid "Configure"
msgstr "Podesi"

#: help.pm:206
#, fuzzy, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Sada možete odabrati koje servise želite da se startaju pri podizanju "
"sistema.\n"
"\n"
"DrakX će prikazati sve dostupni servise na trenutnoj\n"
"instalaciji. Pregledajte ih pažljivo i deselektujte one koji vam neće biti "
"uvek\n"
"potrebni pri podizanju sistema.\n"
"\n"
"Možete dobiti i kratko objašnjenje o servisu selektovanjem\n"
"određenog servisa. Međutim, ukoliko niste sigurni koji od servisa jesu ili\n"
"nisu korisni, sigurnije je ostaviti na default postavkama.\n"
"\n"
"!!Na ovom nivou, budite veoma pažljivi ukoliko želite da koristite  vašu "
"mašinu kao\n"
"server: verovatno nećete želeti da startujete nijedan servis koji vam neće\n"
"trebati. Zapamtite da nekoliko servisa može biti opasno ukoliko\n"
"su omogućeni na serveru. Generano govoreći, izaberite samo servise koje ćete "
"stvarno trebati.\n"
"!!"

#: help.pm:224
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can be used by\n"
"other machines on your local network as well."
msgstr ""
"GNU/Linux upravlja sa vremenom u GMT (Greenwich Mean Time) i prevodi ga u\n"
"lokalno vreme u zavisnosti koju ste vremensku zonu izabrali. Međuti, moguće "
"je\n"
"ovo i deaktivirati deselektovanjem \"Podesi hardverski časovnik na GMT\" "
"tako da hardverski časovnik\n"
"haima isto vreme kao i sistemski časovnik. Ovo je korisno kada na mašini "
"imate\n"
"još jedan operativni sistem kao što je Windows.\n"
"\n"
"Opcija \"Automatska sihronizacija časovnika\" će automatski regulisati\n"
"časovnik konektovanjem na udaljeni vremenski server na Internetu. Na \n"
"listi koja je prikazana, izaberite server koji se nalazi blizu vas. "
"Naravno,\n"
"morate imati ispravno podešenu Internet konekciju da bi mogli da koristite "
"ovu opciju. Ona će\n"
"ustvari instalirati na vašu mašinu vremenski server koji se pomogućnosti "
"može koristiti i od\n"
"strane drugih mašina na vašoj lokalnoj mreži."

#: help.pm:235 install_steps_interactive.pm:828
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Vaš sistemski (BIOS) časovnik je podešen na GMT"

#: help.pm:235
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Automatska sinhronizacija vremena (preko NTP-a)"

#: help.pm:238
#, fuzzy, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs."
msgstr ""
"Grafička kartica\n"
"\n"
"   Program za instalaciju obično automatski detektuje i podešava\n"
"grafičku kartu koja je instalirana u vašoj mašini. Ukoliko to nije slučaj, "
"možete\n"
"da je izaberete sami sa liste ponuđenih kartica.\n"
"\n"
"   U slučaju da je više grafičkih servera dostupno za vašu karticu, sa ili\n"
"bez 3D akceleracije, onda sami odaberite onu koja najbolje odgovara\n"
"vašim potrebama."

#: help.pm:249
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (ili  X Window Sistem) je srce GNU/Linux grafičkog interfejsa\n"
"na koji se oslanjaju sva grafička okruženja (KDE, GNOME, AfterStep,\n"
"WindowMaker, itd.) koja se nalaze u Mandrakelinux-u.\n"
"\n"
"Biće vam prikazana lista sa različitim parametrima čijom izmenom\n"
"možete dobiti optimalan grafički prikaz: Grafička kartica\n"
"\n"
"\n"
"   Program za instalaciju obično automatski detektuje i podešava\n"
"grafičku kartu koja se nalazi u vašem računu. Ukoliko to nije slučaj, "
"možete\n"
"sami da izaberete karticu sa liste.\n"
"\n"
"   Ukoliko su različiti serveri dostupni za vašu karticu, sa ili\n"
"vez 3D akceleracije, onda treba da izaberete onaj koji najviše\n"
"odgovara vašim potrebama.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Program za instalaciju obično automatski detektuje i podešava\n"
"monitor koji povezan sa vašim računarom. Ukoliko se to ne desi možete "
"izabrati\n"
"sami sa liste ponuđenih monitora\n"
"\n"
"   Ovde možete izabrati rezoluciju i broj boja od\n"
"onih koje su ponuđene za vaš hardver. Izaberite ono što najviše odgovara "
"vašim potrebama\n"
"(ove opcije ćete moći izmeniti i nakon instalacije). Izabrana\n"
"konfiguracije se vidi na monitoru.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   sistem će pokušati da otvori grafički ekran u željenoj\n"
"rezoluciji. Ukoliko možete da vidite poruku tokom testa odgovorite sa \"Da"
"\",\n"
"i DrakX će nastaviti sa sledećim korakom. Ukoliko ne možete da vidite "
"poruku, to\n"
"znači da je neki deo autotedekcije bio nepravilan i\n"
"test će automatski završiti nakon 12 sekundi, otavarajući meni za\n"
"konfiguraciju. Izmenite opcije sve dok ne dobijete korektan grafički "
"prikaz.\n"
"\n"
"\n"
"\n"
"Opcije\n"
"\n"
"   Ovde možete da izaberete da li želite da vaš račuanr automatski\n"
"pređe na grafički interfejs pri startanju. Očigledno, izabraćete\n"
"\"Ne\" ukoliko je vaša mašina server, ili ukoliko niste uspeli da uspešno \n"
"podesite grafički prikaz."

#: help.pm:304
#, fuzzy, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""
"Monitor\n"
"\n"
"   Program za instalaciju obično automatski detektuje i podešava\n"
"monitor povezan na vašu mašinu. Ukoliko se to nedesi, možete sami\n"
"sami da izaberete model monitora sa liste."

#: help.pm:311
#, fuzzy, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Rezolucija\n"
"\n"
"   Ovde možete izabrati rezoluciju i broj boja koje su\n"
"dostupne za vaš hardver. Izaberite ono što najviše odgovara vašim potrebama "
"(ove opcije ćete moći\n"
"da promenite i nakon instalacije). Primer izabrane\n"
"konfiguracije je prikazan na monitoru."

#: help.pm:319
#, fuzzy, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you are asked to choose the server that best\n"
"suits your needs."
msgstr ""
"U slučaju da su dostupni različiti serveri za vašu karticu, sa ili\n"
"bez 3D akceleracije, najbolje je da izaberete server koji\n"
"najviše odgovara vašim potrebama."

#: help.pm:324
#, fuzzy, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"Na kraju, bićete upitani da li želite grafički interfejs\n"
"pri startanju sistema. Ovo pitanje će vam biti postavnjeno čak i ako niste "
"testirali\n"
"konfiguraciju. Naravno, odgovorićete \"Ne\" ukoliko vaša mašina predstalja\n"
"server, ili ukoliko niste uspešno podesili\n"
"displejed."

#: help.pm:332
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you have previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended.. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"U ovom trenutku, morate da izaberete gde ćete instalirati\n"
"Mandrakelinux operativni sistem na vaš hard disk. Ukoliko je prazan ili\n"
"postojeći operativni sistem koristi sav postojeći prostor na disku, treba da "
"ga\n"
"particionirate. U osnovi, particioniranje hard diska se sastoji logičkog\n"
"deljenja da bi obezbedili prostor za instalaciju vaš novi Mandrakelinux "
"sistem.\n"
"\n"
"Pošto su efekti procesa particioniranja obično nepovratni,\n"
"particioniranje može biti prilično stresan proces za neiskusne korisnike.\n"
"Ovaj čarobnjak ga pojednostavljuje. Pre početka, konsultujte upustvo i ne "
"žurite.\n"
"\n"
"Ukoliko ste pokrenuli instalaciju u Ekspert modu, pokrenućete\n"
"DiskDrake, Mandrakelinux-ov alat za particije, koji vam dozvoljavaw da\n"
"fino podesite vaše particije. Pogledajte DiskDrake sekciju u ``User "
"Guide''.\n"
"Iz instalacionog interfejsa, možete koristiti čarobnjake kao što je opisano "
"ovde\n"
"klikom na dijalogov \"Čarobnjak\" taster.\n"
"\n"
"Ukoliko su particije već kreirane, od predhodne instalacije \n"
"ilikreirane drugim alatom za particioniranje, morate izabrati \n"
" na koje od njih ćete instalirati Linux sistem.\n"
"\n"
"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
"Da bi to uradili, možete da koristite gore postavljeni čarobnjak. U "
"zavisnosti \n"
"od konfiguracije hard diska, postoji nekoliko mogućnosti:\n"
"\n"
" * \"Koristi slobodan prostor\": ova opcija će jednostavno dovesti do  "
"automatskog\n"
"particioniranja vašeg praznog(ih) diska(ova). Neće vam biti postavljana "
"daljna pitanja;\n"
"\n"
" * \"Koristi postojeće particije\": čarobnjak je detektovao jednu ili više \n"
"postojećih Linux particija na vašem hard disku. Ukoliko\n"
"želite da njihj koristite, izaberite ovu opciju.\n"
"\n"
" * \"Koristi slobodan prostor na Windows particiji\": ukoliko je Microsoft "
"Windows\n"
"instaliran na vašem disku i on zauzima sav postojeći prostor na njemu,\n"
"moraćete da kreirate slobodan prostor za Linux. Da bi to uradili, možete "
"izbrisati\n"
"Microsoft Windows particiju i podatke (pogledajte `Brisanje celog diska'' "
"ili ``Ekspert\n"
"mod'' opcije) ili da promenite veličinu Microsoft Windows particije. Promena "
"veličine\n"
"se može isvesti bez gubljenja podataka, ali se pteporučuje da prvo "
"defragmentirate\n"
"Windows particiju iz samog Windows-a. Backup podataka takođe nije loša "
"ideja..\n"
"Ovo rešenje se preporučuje ukoliko želite da koristite Mandrakelinux i\n"
"Microsoft Windows na istom kompjuteru.\n"
"\n"
"   Pre nego što izaberete ovu opciju, morate da razumete da nakon ove "
"procedure\n"
"veličina vaše Microsoft Windows particije će biti manja\n"
"u odnosu na trenutno stanje. Imađete manje slobodnog prostora u Microsoft\n"
"Windows-u za smeštanje podataka ili instalaiju novog softvera;\n"
"\n"
" * \"Brisanje cvelog diska\": ukoliko želite da izbrišete sve podatke i sve\n"
"particije koji postoje na vašem hard disku i zamenite ih vašim\n"
"novim Mandrakelinux sistemom, možete da izaberete ovu ociju. Budite\n"
"pažljivisa ovom opcijom, jer nećete biti u mogućnosti\n"
"da povratite staro stanje nakon potvrde.\n"
"\n"
"   !! Ukoliko izaberete ovu opciju, svi podaci na disku će biti "
"izgubljeni. !!\n"
"\n"
" * \"Ukloni Windows\": ova opcija će jednostavno izbrisati sve sa hard diska "
"i\n"
"kreirati nove particije. Svi podaci na vašem disku\n"
"će biti izbrisani;\n"
"\n"
"   !! Ukoliko izaberete ovu opciju, svi podaci na disku će biti "
"izgubljeni. !!\n"
"\n"
" * \"Custom particionisanje diska\": izaberite ovu opciju ukoliko želite\n"
"da ručno vaš hard disk. Budite pažljivi -- ovo je moćan\n"
"ali opasan izbor i vrlo lako možete izgubiti svoje podatke. Zbog toga se\n"
"ova opcija preporučuje samo onima koji imaju iskustva\n"
"od ranije. Za više podataka o tome kako da koristite\n"
"program DiskDrake, pogledajte poglavlje ``Upravljajte svojim particijama '' "
"u\n"
"``Početnički vodič''."

#: help.pm:389 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Koristi slobodan prostor"

#: help.pm:389
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "Koristi postojeću particiju"

#: help.pm:389 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Korisiti slobodan prostor na Windows particiji"

#: help.pm:389 install_interactive.pm:211
#, c-format
msgid "Erase entire disk"
msgstr "Izbriši celi disk"

#: help.pm:389
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "Ukloni Windows(TM)"

#: help.pm:389 install_interactive.pm:226
#, c-format
msgid "Custom disk partitioning"
msgstr "Custom disk particioniranje"

#: help.pm:392
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. Don't forget to\n"
"remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\": saves a list of the packages selected in this installation. To\n"
"use this selection with another installation, insert the floppy and start\n"
"the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<."
msgstr ""
"I stigli ste do kraja. Instalacija je sada završena i vaš GNU/Linux sistem "
"je \n"
"spreman za upotrebu. Samo kliknite na \"Sledeći -\" da bi restartovali "
"sistem. Možete pokrenuti\n"
"GNU/Linux ili Windows, šta god više preferirate (ukoliko imate instalirana "
"dva sistema), čim\n"
"se računar ponovo pokrene.\n"
"\n"
"Taster Napredno \"%s\" (samo u Ekspert modu) prikazuje još dva tastera za:\n"
"\n"
" * \"kreiranje auto-instalacione diskete\": radi kreiranja instalacionog "
"flopi diska\n"
"koji će automatski pokrenuti celu instalaciju bez pomoći operatora\n"
", slično ovoj instalaciji koju ste upravo izveli.\n"
"\n"
"   Možete primetiti da su dve različite opcije dostupne nakon pritiska na "
"taster:\n"
"\n"
"    * \"Sa ponavljanjem\". Ovo je delom automatizirana instalacija jer korak "
"sa\n"
"particioniranjem diska ostaje interaktivan (samo on).\n"
"\n"
"    * \"Automatizovano\". Potpuno automatizovana instalacija: hard disk se u "
"potpunosti\n"
"formatizuje, i svi podaci će biti izgubljeni.\n"
"\n"
"   Ova opcija je veoma korisna ukoliko izvodite veliki broj sličnih "
"instalacija\n"
"na većem broju mašina. Pogledajte sekciju o auto instalaciji na našem web "
"sajtu.\n"
"\n"
" * \"Sačuvaj selekciju paketa\"(*) : snima selekciju paketa koji ste\n"
"napravili u ovoj instalaciji. Tako, da kada budete izvodili drugu "
"instalaciju, ubacite disketu\n"
"i pokrenete pomoćni ekran pritiskom na\n"
"[F1] taster, i zahtevom za >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) Morate da iamte  FAT-formatiranu disketu (da bi je formatirali pod GNU/"
"Linux-om, ukucajte\n"
"\"mformat a:\")"

#: help.pm:418
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "Kreiraj auto instalacionu disketu"

#: help.pm:418 install_steps_interactive.pm:1322
#, c-format
msgid "Replay"
msgstr "Ponavljanje"

#: help.pm:418 install_steps_interactive.pm:1322
#, c-format
msgid "Automated"
msgstr "Automatski"

#: help.pm:418 install_steps_interactive.pm:1325
#, c-format
msgid "Save packages selection"
msgstr "Sačuvaj selekciju paketa"

#: help.pm:421
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Svaka particija koja je novodefinisana mora biti\n"
"formatirana za uptrebu (formatiranje znači kreiranje datotečnog(fajl) "
"sistema).\n"
"\n"
"Sada možda želite da reformatirate postojeće particije da bi izbrisali\n"
"podatke koje sadrže. Ukoliko želite to, izaberite particije \n"
"koje želite da formatizujete.\n"
"\n"
"\n"
"Zapamtite da nije potrebno da reformatirate sve postojeće particije.\n"
"Morate da reformatirate particije koje sadrže operativni sistem \n"
"(kao što su \"/\", \"/usr\" ili  \"/var\") ali ne morate da reformatirate "
"particije koje sadrže podatke\n"
"koje želite da zadržite (obično /home).\n"
"\n"
"Pazite pri biranju particija, posle formatiranja, sv podaci će \n"
"biti izbrisani i nećete ih moći povratiti.\n"
"\n"
"Kliknite na \"Sledeće ->\" kada bude spremni da formatirate particije\n"
"\n"
"Kliknite na \"<- Prethodno\" ako želite da izaberete drugu particiju za svoj "
"novi\n"
"Mandrakelinux sistem.\n"
"\n"
"Kliknite na \"Napredno\" ukoliko želite da izaberete particije koje će biti "
"proverene\n"
"da li imaju loše sektore."

#: help.pm:444 help.pm:1005 install_steps_gtk.pm:433 interactive.pm:404
#: interactive/newt.pm:307 printer/printerdrake.pm:3088
#: standalone/drakTermServ:388 standalone/drakbackup:4012
#: standalone/drakbackup:4041 standalone/drakbackup:4095
#: standalone/drakbackup:4119 standalone/drakbackup:4143
#: standalone/drakbackup:4195 standalone/drakbackup:4225
#: standalone/drakbackup:4247 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "Prethodni"

#: help.pm:447
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrakelinux, it is likely that some\n"
"packages will have been updated since the initial release. Bugs may have\n"
"been fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one near to you. A package-selection tree will\n"
"appear: review the selection, and press \"%s\" to retrieve and install the\n"
"selected package(s), or \"%s\" to abort."
msgstr ""
"U vreme kada budete instalirali Mandrakelinux, vrlo je moguće da će neki\n"
"paketi biti ažurirani u odnosu na inicijalno izdanje. Neki bagovi mogu \n"
"biti ispravljeni, a sigurnosni propusti zatvorene. Da bi mogli da koristite "
"ove novije verzije\n"
"mi vam predlažemo da ih skinete sa Interneta. Izaberite\n"
"Da ili \"Da\" ukoliko imate podešenu Internet konekciju, ili Ne ili \"No\" "
"ukoliko više volite da\n"
"instalirate te nove pakete kasnije.\n"
"\n"
"Izborom na \"Da\" prikazuje se lista mesta sa kojih možete da dobavite noe "
"verzije \n"
"paketa. Izaberite mesto koje vam je najbliže. Zatim će se pojaviti stablo sa "
"slelekcijom paketa:\n"
"pregledajte selekciju, i pritisnite \"Instaliraj\" da bi skinuli i\n"
"instalirali selektovni(e) paket(e), ili \"Poništi\" za odustajanje."

#: help.pm:457 help.pm:602 install_steps_gtk.pm:432
#: install_steps_interactive.pm:148 standalone/drakbackup:4279
#, c-format
msgid "Install"
msgstr "Instaliraj"

#: help.pm:460
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option. You will\n"
"be able to change that security level later with tool draksec from the\n"
"Mandrake Control Center.\n"
"\n"
"The \"%s\" field can inform the system of the user on this computer who\n"
"will be responsible for security. Security messages will be sent to that\n"
"address."
msgstr ""
"na ovom mestu, DrakX će vam dozvoliti da odredite željeni nivo sigurnosti\n"
"za vaš računar. Kao nepisano pravilo, nivo sigurnosti bi trebao\n"
"veći ukoliko mašina sadrži važne podatke, ili ukoliko je mašina\n"
"direktno vezana na Internet. Spuštanje sigurnosti uglavnom\n"
"se vidi u opvećanju lakoće rada sa sistemom. Pogledajte \"msec\"\n"
"poglavlje u ``Upupstvo za komandnu liniju''da bi dobavili više informacija\n"
"o nivioima sigurnosti.\n"
"\n"
"Ukoliko ne znate da izaberete, zadržite default postavku."

#: help.pm:472
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "Administrator za sigurnost:"

#: help.pm:475
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Na ovoj tački, morate izbrati koju particiju(e) želite da koristite za\n"
"instalaciju novog Mandrakelinux sistema. Ukoliko su particije\n"
"već definisane (od predhodne instalacije ili od strane\n"
"drugog alata za particije), možete da koristite postojeće particije.\n"
"U drugim slučajevima,\n"
"hard disk particije moraju biti definisane.\n"
"\n"
"Da bi kreirali particije, morate prvo izabrati hard disk. Možete izabrati\n"
"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
"\n"
"Za particioniranje selektovanog hard diska, možete koristiti sledeće "
"opcije:\n"
"\n"
"   * \"Očisti sve\": ova opcija briše sve particije na izabranom hard \n"
"disku.\n"
"\n"
"   * \"Auto alociranje\": ova opcija dozvoljava da automatski kreirate  Ext2 "
"i \n"
"swap particije na slobodnom prostoru \n"
"     hard diska.\n"
"\n"
"\"Još\": daje pristup dodatnim opcijama:\n"
"\n"
"   * \"Spasi tabelu particija\": ukoliko je vaša tabela particija "
"oštećena, \n"
"možete da probate da je oporavite koristeći ovu opciju. Budite\n"
"     pažljivi i znajte da može da i ne uspe.\n"
"\n"
"   * \"Vrati na staro\": ova opcija će poništiti izmenu.\n"
"\n"
"   * \"Ponovno učitavanje\": ovu opciju možete koristiti ukoliko želite da \n"
"poništitisve promene i učitate inicijalnu tabelu particija\n"
"\n"
"   * \"Čarobnjak\": ukoliko želite da koristite čarobnjaka za "
"particioniranje \n"
"hard diska, izaberite ovu opciju. Preporučena je ukoiko\n"
"     nemate mnogo znanja o partcijama.\n"
"\n"
"   * \"Povrati sa diskete\": ukoliko ste snimili tabelu particija na \n"
"disketu  tokom prethodne instalacije, možete je\n"
"     vratiti sa ovom opcijom.\n"
"\n"
"   * \"Snimi na disketu\": ukoliko želite da da snimite tabelu particija na\n"
"disketu da bi mogli kasnije da je povratite, možete da iskoristite\n"
"     ovu opciju. Naročito preporučujemo ovu opciju\n"
"\n"
"   * \"Urađeno\": kada završite sa particioniranjem hard diska, iskoristite "
"ovu opciju da bi snimili promene.\n"
"\n"
"Kada definišete veličinu particija, možete konačno podesiti veličinu\n"
"particija pomoću tastera sa strelicama na vašoj strelicama\n"
"Za više informacija, možete za svaku ocpiju  dobiti kretanjem pomoću "
"tastature: navigacijom kroz particije pomoću [Tab] tastera i [Up/Down] "
"strelica.\n"
"\n"
"Kada je particija izabrana, možete koristiti:\n"
"\n"
" * Ctrl-c za kreiranje nove particije (kada je izabrana prazna particija);\n"
"\n"
" * Ctrl-d za brisanje particije;\n"
"\n"
" * Ctrl-m za postavljanje tačke montiranja.\n"
"\n"
"Da bi dobili informacije o različitim dostupnim tipovima sistema, "
"pročitajte\n"
"ext2FS poglavlje iz ``Upustva''.\n"
"\n"
"Ukoliko radite instalaciju na PPC Mašinu, možda ćete želeti da kreirate "
"malu\n"
"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo većom,\n"
"na primer 50MB, možete iskoristiti taj prostor za smeštanje\n"
"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."

#: help.pm:544
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "Automontiranje prenosivog medija"

#: help.pm:544
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "Pređi na normalni mod"

#: help.pm:547
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Jedna ili više Microsoft Windows particija je detektovano \n"
"na hard disku. Izaberite koju od njih želite da smanjite da bi instalirali\n"
"novi Mandrakelinux operativni sistem.\n"
"\n"
"Svaka particija je ispisana na sledeći način: \"Ime Linux-a\",\"Ime Windows-a"
"\"\n"
"\"Kapacitet\".\n"
"\n"
"\"Ime Linux-a\" je kodirano na sledeći način: \"tip hard diska\", \"broj "
"hard diska\",\n"
"\"broj particije\" (na primer, \"hda1\").\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID uređaj i \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
"diskovima:\n"
"\n"
" * \"a\" znači  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
" * \"b\" znači \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
" * \"c\" znači \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", a \"b\" znači "
"\"sekundarni hard disk \", itd.\n"
"\n"
"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi disk\n"
"ili particija se zove \"C:\")."

#: help.pm:578
#, fuzzy, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
"\"Država\": proverava trenutni izbor zemlje. Ukoliko se ne nalazite u ovojs\n"
"državi, kliknite na taster i i izaberite drugu."

#: help.pm:584
#, fuzzy, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
"Ovaj korak se aktivira samo u slučaju da postoji stara GNU/Linux particija "
"na\n"
"vašioj mošini.\n"
"\n"
"DrakX sada treba da zna da li želite da izvedete čistu instalaciju ili "
"ažuriranje\n"
"postojećeg Mandrakelinux sistema:\n"
"\n"
" * \"Instalacija\": U većini slučajeva, ova opcija kompletno briše stari\n"
"sistem. Ukoliko želite da izmenite broj particija, ili\n"
"promenite fajl sistem, trebali bi da koristite ovu opciju. Ipak,  u "
"zavisnosti od\n"
"šeme particija, možete zaštititi neke postojeće podatke\n"
"od formatiranja.\n"
"\n"
" * \"Ažuriranje\": ova instalaciona klasa vam dozvoljava da uradite "
"ažuriranje paketa\n"
"na trenutno instaliranom Mandrake Linux sistemu. Vaša trenutna\n"
"šema particija i korisnički podaci se ne menjaju. Većina drugih\n"
"konfiguracionih koraka i dalje ostaje dostupna, slično standardnoj "
"instalaciji.\n"
"\n"
"Upotreba opcije ``Ažuriranje'' bi trebalo da bude bez problema na Mandrake "
"Linux sistemima\n"
"od verzije \"8.1\" ili novije. Izvođenje ažuriranja na verzijama \n"
"Mandrakelinux pre \"8.1\" nije preporučljivo."

#: help.pm:605
#, fuzzy, c-format
msgid ""
"Depending on the language you chose in section , DrakX will automatically\n"
"select a particular type of keyboard configuration. Check that the\n"
"selection suits you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard that corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"U principu, DrakX bira desnu tastaturu za vas (u zavisnosti od toga koji\n"
"ste jezik izabrali) i čak i nećete videti ovaj korak. Ipak, može\n"
"se desiti da niste dobili tastaturu koja odgovara vašem jeziku: na\n"
"primer, ukoliko ste Švajcarac koji govori engleski, verovatno ćete želeti\n"
"Švajcarsku tastaturu. Ili ukoliko govorite Engleski ali se nalazite\n"
"u Kvebeku, možete se naći u istoj situaciji. U oba\n"
"slučaja, moraćete da se vratite na ovaj instalacioni korak i izaberete\n"
"odgovarajuću tastaturu sa liste.\n"
"\n"
"Kliknite na taster \"Još\" da bi dobili kompletnu listu\n"
"podržanih tastatura.\n"
"\n"
"Ukoliko izaberete raspored tastature baziran na non-Latin alfabetu, sledeći\n"
"dijalog će vam ponuditi da izaberete kombinaciju tastera koji će služiti\n"
"da menjate Latin i non-Latin rasporede."

#: help.pm:624
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. Though full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux will be using it\n"
"or not depending on the user choices:\n"
"\n"
" * If you choose a languages with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for the system at user request by\n"
"selecting option \"%s\" independently of which language(s) have been\n"
"chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will also be installed.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Vaš izbor jeika će uticati na jezik dokumentacije,\n"
"instalacije i sistema uopšte. Prvo izaberite region u kojem se nalazite,\n"
"a zatim jezik koji govorite.\n"
"\n"
"Klikom na taster \"Napredno\" omogućićete sebi da vidite druge\n"
"jezike koje možete instalirati na vašu radnu stranicu. Biranjem drugih "
"jezika\n"
"ćete instalirati fajlove vezane (za specificirane jezike) za dokumentaciju "
"i\n"
"aplikacije. Na primer, ukoliko će na vašem računaru hostovati korisnici iz "
"Španije\n"
"izaberite Engleski kao glavni a na stablu\n"
"označite i \"Španiski|Španija\".\n"
"\n"
"Zapamtite da možete instalirati više jezika. Kada izaberete sve željene\n"
"dodatne lokalizacije kliknite na taster \"U redu\" da bi nastavili.\n"
"\n"
"Da bi menjali različite jezike koji su instalirani na vašem sistemu, možete "
"pokrenuti\n"
" \"/usr/sbin/localedrake\" komandu kao \"root\" da bi promenili jezik koji "
"se \n"
"koristi u celom sistemu. pokretanjem komande kao regularni korisnik samo "
"ćete promeniti\n"
"postavke jezika za datog korisnika."

#: help.pm:660
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:663
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n"
"that says \"%s\". DrakX will then configure your mouse so that you can\n"
"simulate the wheel with it: to do so, press the middle button and move your\n"
"mouse up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
"DrakX generalno detektuje broj tastera koji vaš miš posdeduje. Ukoliko se to "
"ne desi\n"
"on će pretpostaviti da miš sa dva tastera i podesiće emulaciju trećeg "
"tastera.\n"
"DrakX će automatski prepoznati da li se radi o PS/2, serijskom ili USB "
"mišu.\n"
"\n"
"Ukoliko želite da specificirate drugi tip miša odaberite odgovarajući\n"
"tip sa liste.\n"
"\n"
"Ukoliko izberete miša koji se razlikuje od default-a pojaviće vam se\n"
"test ekran. Koristite tastere i točkiće da bi proverili da li su postavke\n"
"dobre. Ukoliko miš ne radi ispravno pritisnite taster za razmak (space bar) "
"ili\n"
"taster [Return] da bi poništili test i vratili se da bi pokušali ponovo.\n"
"\n"
"Točkići na mišu se ponekad ne detektuju automatski, pa ćete sami morati da\n"
"izaberete miša sa liste. Pazite da izaberete odgovarajući vezano\n"
"za port na koji je miš povezan. nakon izbora miša\n"
"i pritiska na taster \"Sledeći ->\", slika miša će biti prikazana na "
"ekranu.\n"
"Pokrenite toškić da bi proverili da li je pravilno aktiviran. Kada \n"
"vidite da se točkić na ekranu pomera kao i točkić na mišu, testirajte\n"
"tastere i proverite da li kursor na ekrani prati vaše \n"
"pomeranje miša."

#: help.pm:691
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "Emulacija tastera"

#: help.pm:694
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Molim, izaberite odgovarajući port. Na primer, COM1 port pod MS Windows-om\n"
" u Linux-u ima oznaku ttyS0."

#: help.pm:698
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password you chose is too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the Internet and you absolutely trust everybody\n"
"who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Ovo je najzanačajnija tačka u odlučivanju o sigurnosti vašeg GNU/Linux\n"
"sistema: morate da unesete \"root\" lozinku. \"root\" je administrator\n"
"sistema i jedini je ovlašten da vrši izmene, dodaje korisnike,\n"
"menja osnovnu konfiguraciju sistema, itd. Ukratko, \"root\" može\n"
"da uradi sve! Zbog toga morate da izaberete lozinku koja teško može da se\n"
"pogodi - DrakX će vam reći ukoliko je ona suviše jednostavna. Kao što možete "
"da vidite, možete da\n"
"izaberete i da ne unesete lozinku, ali vam ozbiljno preporučujemo da to\n"
"neradite iz jednog razloga: nemojte da mislite da to što ste startovali GNU/"
"Linux da\n"
"vaši drugi operativni sistemi sigurni od grešaka. Kako \"root\" može da\n"
"preskoči sva ograničenja i nenamerno izbriše sve podatke na particiji\n"
"neopreznim pristupom, važno je da je teško\n"
"postati \"root\".\n"
"\n"
"Lozinka treba da bude mešavina brojeva i slova i treba da sadrži najmanje 8\n"
"karaktera. Nikada ne zapisujte na papir \"root\" lozinku - tako lako\n"
"možete ugroziti sistem.\n"
"\n"
"Međutim, potrudite se da lozinka ne bude previše duga ili komlikovana zato\n"
"što treba da je zapamtite bez mnogo napora.\n"
"\n"
"Lozinka neće biti prikazana na ekranu kada je ukucavate. Srećom, moći ćete\n"
"da je ukucate dva puta da bi smanjili mogućnost greše u kucanju.\n"
"Ukoliko ipak pogrešite u kucanju, ali dva puta, ova\n"
"``neispravna'' lozinka će biti korištena kada se budete prvi put "
"konektovali.\n"
"\n"
"U Ekspertnomm modu, bićete pitani da li ćete se konektovati na\n"
"autentifikacioni server, kao što je NIS ili LDAP.\n"
"\n"
"Ukoliko vaša mreža koristi LDAP (ili NIS) protokol za autentifikaciju, "
"selektujte\n"
"\"LDAP\" (ili \"NIS\") za autentifikaciju. Ukoliko to neznate, pitajte\n"
"vašeg mrežnog administratora.\n"
"\n"
"Ukoliko se vaš računar ne konektuje na administrirane mreže, treba da\n"
"izaberete \"Lokalni fajlovi\" za autentifikaciju."

#: help.pm:733
#, fuzzy, c-format
msgid "authentication"
msgstr "Autentifikacija"

#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:733 install_steps_interactive.pm:1152
#, c-format
msgid "No password"
msgstr "Bez lozinke"

#: help.pm:736
#, fuzzy, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
"management, notably for laptops. If you know your hardware supports it and\n"
"you need it, check this box.\n"
"\n"
" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n"
"instabilities, machine freeze, ...) you should try disabling APIC by\n"
"checking this box.\n"
"\n"
"!! Be aware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrakelinux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
"Ovaj dijalog vam nudi mogućnost za fino podešavanje vašeg startera:\n"
"\n"
" * \"Ponuđeni starteri\": imate tri opcije:\n"
"\n"
"    * \"GRUB\": ukoliko više volite GRUB (tekstualni mod).\n"
"\n"
"    * \"LILO sa grafičkim menijem\": ukoliko više volite LILO sa grafičkim\n"
"interfejsom.\n"
"\n"
"    * \"LILO sa tekstualnim menijem\": ukoliko više volite LILO sa \n"
"tekstualnim interfejsom.\n"
"\n"
" * \"Boot uređaj\": u većini slučajeva, nećete menjati default\n"
"(\"/dev/hda\"), ali ukoliko želite, možete starter da instalirate na\n"
"drugi hard disk (\"/dev/hdb\"), ili čak na disketu (\"/dev/fd0\").\n"
"\n"
" * \"Vreme do pošetka startanja default sistema\": kada startujete računar,\n"
"ova pauza vam omogućava da izaberete - u starterovom meniju,\n"
"drugi sistem (recimo Njinjdovs).\n"
"\n"
"!! Budite pažljivi, jer ako izaberete da ne instalirate starterr (klikom na\n"
"\"Poništi\"), morate osigurati drugi način da startujete Mandrake\n"
"Linux sistem! Budite sigurni da znate št aradite pre nego izmenite\n"
"i jednu opciju. !!\n"
"\n"
"Klikom na opciju \"Napredno\" u ovom dijalogu će vam biti ponuđene mnoge "
"napredne\n"
"opcije, koje su rezervisane za napredne korisnike"

#: help.pm:768
#, fuzzy, c-format
msgid "GRUB"
msgstr "GB"

#: help.pm:768
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: help.pm:768
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: help.pm:768
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: help.pm:768
#, fuzzy, c-format
msgid "Delay before booting the default image"
msgstr "Pauza pre startanja default image-a"

#: help.pm:771
#, fuzzy, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"nakon što podesite opšte parametre startera , lista startnih opcija\n"
"će biti dostupna za vreme pokretanja sistema.\n"
"\n"
"Ukoliko postoji još operativnih sistema na vašem računaru oni će automatski\n"
"biti dodani u startni meni. Možete ih i detaljno podesiti\n"
"ako kliknete na  \"Dodaj\" da bi kreirali novi uos, izaberete postojeći \n"
"klikom na \"Izmeni\" ili \"Ukloni\" ako želite da ih izmenite ili uklonite. "
"\"U redu\" prihvata\n"
"vaše izmene.\n"
"\n"
"Ako budete želeli da dozvolite nekom drugom da ima pristup ostalim "
"operativnim sistemima\n"
"ako restartuje sistem. Možete da izbrišete\n"
"odgovarajuće unose za operativne sisteme iz startnog menija, ali će vam onda "
"biti \n"
"potrebna startna disketa da bi mogli da pristupite ovim\n"
"operativnim sistemima!"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakbackup:1604 standalone/drakfont:589 standalone/drakfont:655
#: standalone/drakups:280 standalone/drakups:329 standalone/drakups:349
#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid "Add"
msgstr "Dodaj"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#, c-format
msgid "Modify"
msgstr "Promeni"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakups:282 standalone/drakups:331 standalone/drakups:351
#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid "Remove"
msgstr "Ukloni"

#: help.pm:787
#, c-format
msgid ""
"LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or any\n"
"other OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
"won't install any bootloader. Use it only if you know what you are doing."
msgstr ""

#: help.pm:803
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrakelinux offers two. Each of the printing systems\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it is compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"Sada treba da izaberemo sistem za štampanje za vaš računar. Drugi OS-ovi "
"vam\n"
"nude jedan, ali vam Mandrakelinux nudi čak tri.\n"
"\n"
" * \"pdq\" što znači ``print, don't queue'', je izbor za one koji imaju\n"
"direktni konekciju sa svojim štampačem i želite da izbegnete\n"
"bilo kakve zastoje štampača, a pri tome nemate mrežne štampače. On može da "
"se koristi\n"
"samo na veoma jednostavnim mrežama i pomalo je i spor za mreže. Izaberite "
"\"pdq\"\n"
"ukoliko upoznajete GNU/Linux. Vaš izbor naravno možete promeniti\n"
"nakon isntalacije pokrećući PrinterDrake from iz Mandrake Kontrolnog\n"
"Centra i klikom na expert taster.\n"
"\n"
" * \"%s\"``Common Unix Printing System'', je izvrstan za štampanje na vašem\n"
"lokalonom štampaču kao i za štampanje po celoj zemaljskoj kugli. On je "
"jednostavan i može se ponašati\n"
"kao server ili kao klijent sa starog \"lpd\" sitema za štampanje. Takođe, "
"on\n"
"je kompatibilan sa sistemima koji su ranije postojali. On može mnogo toga, "
"ali\n"
"osnovno podešvanje je jednostavno kao i kod \"pdq\". Ukoliko treba da "
"emulirate\n"
"an \"lpd\" server, morate da pokrenete \"cups-lpd\" demon. On poseduje\n"
"grafički interfejs za štapanje i izbor opcija za štampanje.\n"
"\n"
"Ako to nij slučaj, CUPS je onda prava stvar jer je jednostavniji i bolji za "
"rad preko\n"
"mreža."

#: help.pm:826
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:826 printer/cups.pm:115 printer/data.pm:83
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:829
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX sada treba da detektuje IDE uređaje prisutne u vešem računaru.DrakX "
"će \n"
"potražiti PCI SCSI adapter(e). Ukoliko DrakX pronađe SCSI adapter(e) i bude "
"znao koji upravljački program \n"
"(drajver) koristion će ga(ih) automatski instalirati.\n"
"\n"
"Pošto se može desiti da pri detekciji neka komponenta ne bude detektovana \n"
"DrakX će vas upitati da li imate PCI SCSI adapter. Kliknite \"Da\" \n"
"ukoliko znate da imate SCSI adapter na svojoj mašini. Na prikazanoj listi \n"
"moći ćete da izaberete odgovoarajući.\n"
"Kliknite \"Ne\" ukoliko nemate SCSI adaptera u  mašini. Ukoliko niste \n"
"sigurni\n"
"proverite na listi detektovanog hardvera selektovanjem \"Pogledaj info o \n"
"hardveru\"i klikom na \"U redu\". Pregledajte\n"
"listu a onda kiknite na \"U redu\" da bi se vratili na pitanje o SCSI \n"
"uređajima.\n"
"\n"
"Ukoliko morate ručno da specificirate vaš PCI SCSI adapter, DrakX će\n"
"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
"ispita adapter radi tih opcija. Ovo obično i uspe.\n"
"\n"
"Ukoliko DrakX nije u stanju da ispita opcije koje su potrebne, moraćete da \n"
"sami odredite opcije za drajver.\n"
"Pogledajte i Instalacioni vodič (3 poglavlje, sekcija \"Prikupljanje \n"
"informacija o vašem hardveru\")\n"
"da bi saznali kako da pribavite informacije o parametrima potrebnim za \n"
"hardver,sa svoje Windows instalacije (ukoliko je imate na sistemu),\n"
"dokumenatciju o hardveru, ili sa proizvođačevog \n"
"veb sajta (ukoliko imate pristup internetu)."

#: help.pm:847
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"Možete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
"alternativne kernele, ili za emergency boot image.\n"
"\n"
"Za druge OS-ove - unos sadrži samo oznaku i \"root\" particiju.\n"
"\n"
"Za Linux, postoji nekoliko mogućnosti: \n"
"\n"
" * Oznaka: Ovo je jednostavno ime koje ćete ukucati pri yaboot promptu da "
"bi \n"
"izabrali ovu \n"
"startnu opciju.\n"
"\n"
" * Image: Ovo je ime kernela koji se startuje.  Obično vmlinux ili \n"
"varijacija vmlinux sa ekstenzijom.\n"
"\n"
" * Root: \"root\" uređaj ili \"/\" za vašu Linux instalaciju.\n"
"\n"
"  \n"
" * Dodatak: Na Apple hardveru, kernelova opcija se koristi za prilično "
"često \n"
"da\n"
"asistira inicijalizaciju video hardvera, ili da omogući emulaciju tastera "
"za \n"
"miš na tastaturi zbog \n"
"čestog nedostatka drugog i trećeg tastera na Apple miševima.  Sledi par \n"
"primera:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: Ova opcija se može koristiti ili za podizanje inicijalnih "
"modula,\n"
"pre nego je boot \n"
"uređaj dostupan, ili za podizanje ramdisk image za startanje u hitnim "
"situacijama.\n"
"\n"
" * Initrd-veličina: veličina default ramdisk je generalno 4096 bajta.  \n"
"Ukoliko vam treba\n"
"alociranje velikog ramdisk-a, ova opcija može biti korisna.\n"
"\n"
"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-\n"
"only, da bi omogućila\n"
"proveru datotečnog sistema pre nego sistem postane \"aktivan\".  Ovde "
"možete \n"
"poništiti ovu opciju.\n"
"\n"
" * NoVideo: Ukoliko se Apple video hardver pokaže veoma problematičnim, \n"
"možete\n"
"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom \n"
"framebuffer podrškom.\n"
"\n"
" * Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
"pritisnete ENTER pri yaboot promptu.  Ovaj unos će takođe biti dodatno \n"
"označen sa \"*\", ukolik pritisnete [Tab] da bi videli startnu selekciju."

#: help.pm:894
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Take care to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot je starter NewWorld MacIntosh hardver. On može da pokrene\n"
"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na vašoj mašini.\n"
"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
"instalirani. Ukoliko to nije slučaj, možete ručno dodati unos na ovom\n"
"ekranu. Budite pažljivi pri izboru parametara.\n"
"\n"
"Osnovne opcije Yaboot-a su:\n"
"\n"
" * Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre \n"
"statrtnog\n"
"prompta.\n"
"\n"
" * Boot uređaj: Ukazuje gde želite da smestite informaciju potrebnu za \n"
"startanje GNU/Linux-a. Generalno gledano, moraćete da podesite bootstrap \n"
"\n"
"particiju pre \n"
"nego podesite ovu informaciju.\n"
"\n"
" * Omogući Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu možete \n"
"birati između CD-a, OF starta, MacOS, ili Linux-a.\n"
"\n"
" * Pauza pri startanju kernela: Ova pauza je slična pauzi kod LILO "
"startera.\n"
"Nakon \n"
"izbora Linux-a, imaćete pauzu od 0.1 sekunde pre nego što se selektuje\n"
"default opis kernela.\n"
"\n"
" * Omogući startanje CD-a ?: Ukoliko označite ovu opciju moći ćete da \n"
"izaberete \"C\" za CD pri\n"
"prvom startnom promptu.\n"
"\n"
" * Omogući OF startanje?: Ukoliko označite ovu opciju moći ćete da "
"izaberete \n"
"\"N\" za Open\n"
"Firmware pri prvom startnom promptu.\n"
"\n"
" * Default OS: Možete da izaberete koji operativni sistem će biti pokretan \n"
"kao default kada Open Firmware \n"
"pauza završi."

#: help.pm:926
#, fuzzy, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""
"\"Zvučna kartica\": ukoliko je zvučna kartica detektovana na vašem sistemu, "
"onda je prikazana\n"
"ovde. Ukoliko primetite da prikazana kartica nije ona koja je stvarno "
"prisutna\n"
"u vašem računaru, možete kliknuti na taster i\n"
"drugi drajver."

#: help.pm:929 help.pm:991 install_steps_interactive.pm:960
#: install_steps_interactive.pm:977
#, c-format
msgid "Sound card"
msgstr "Zvučna kartica"

#: help.pm:932
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you wish to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:991 install_steps_interactive.pm:110
#: install_steps_interactive.pm:893 standalone/keyboarddrake:23
#, c-format
msgid "Keyboard"
msgstr "Tastatura"

#: help.pm:991 install_steps_interactive.pm:919 standalone/drakclock:75
#, c-format
msgid "Timezone"
msgstr "Vremenska zona"

#: help.pm:991
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "Grafički interfejs"

#: help.pm:991 install_steps_interactive.pm:993
#, c-format
msgid "TV card"
msgstr "TV katica"

#: help.pm:991
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Interna  ISDN kartica"

#: help.pm:991 install_steps_interactive.pm:1011 standalone/drakbackup:2101
#, c-format
msgid "Network"
msgstr "Mreža"

#: help.pm:991 install_steps_interactive.pm:1037
#, c-format
msgid "Security Level"
msgstr "Nivo sigurnosti"

#: help.pm:991 install_steps_interactive.pm:1051
#, c-format
msgid "Firewall"
msgstr "Zaštitni zid (Firewall)"

#: help.pm:991 install_steps_interactive.pm:1065
#, c-format
msgid "Bootloader"
msgstr "Starter"

#: help.pm:991 install_steps_interactive.pm:1075 services.pm:195
#, c-format
msgid "Services"
msgstr "Servisi"

#: help.pm:994
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Izaberite hard disk koji želite da izbrišete da bi instalirali novu Mandrake "
"Linux \n"
"particiju. Budite pažljivi, svi podaci na njemu će biti izgubljeni\n"
"i neće se moći povratiti!"

#: help.pm:999
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Kliknite na \"Sledeće ->\" ukoliko želite da izbrišete sve podatke i \n"
"particije na ovom hard disku.Budite pažljivi, posle klika na \"U redu\", vi\n"
"nećete moći da povratite bilo koji podatak ili particiju na hard disku,\n"
"pa i bilo koje Windows podatke.\n"
"\n"
"Kliknite na \"<- Pprethodno\" da bi poništi ovu operaciju bez gubljenja "
"podataka i\n"
"particija koje su prisutne na ovom hard disku."

#: install2.pm:119
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Ne mogu da pristupim kernel modulima koji odgovaraju vašem kernelu (fajl %s "
"nmedostaje), što generalno znači da vaš boot floppy nije sinhronizaovan sa "
"Instalacionim medijom (kreirajte noviji boot floppy)"

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Morate i %s da formatirate"

#: install_any.pm:404
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Vi ste izabrali sledeđe servere: %s\n"
"\n"
"\n"
"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
"sigurnosnih\n"
"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
"ih ažurirati\n"
"što je pre moguđe.\n"
"\n"
"\n"
"Da li zaista želite da instalirate ove servise?\n"

#: install_any.pm:425
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Sledeći paketi će biti uklonjeni da bi sistem mogao da se ažurira: %s\n"
"\n"
"\n"
"Da li zaista želite da uklonite ove pakete?\n"

#: install_any.pm:820
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Ubacite FAT formatiranu praznu disketu u uređaj %s"

#: install_any.pm:824
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Ova disketa nije formatirana sa FAT sistemom"

#: install_any.pm:836
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Da bi koristili ovaj izbor za čuvanje selekcije paketa, izaberite "
"instalaciju sa ``linux defcfg=floppy''"

#: install_any.pm:864 partition_table.pm:847
#, c-format
msgid "Error reading file %s"
msgstr "Greška kod otvaranja datoteka %s"

#: install_any.pm:988
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Dogodila se greška - nije nađen ispravan uređaj na kojem bi bili krerani "
"novi datotečnog sistemi. Proverite vaš hardver da vidite šta je uzrok ovog "
"problema."

#: install_gtk.pm:161
#, c-format
msgid "System installation"
msgstr "Instalacija sistema"

#: install_gtk.pm:164
#, c-format
msgid "System configuration"
msgstr "Konfiguracija sistema"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Neke hardverske komponente u vašem računaru zahtevaju odgovarajuće drajvere "
"da bi normalno funkcionisale.\n"
"Informacije o njima možete pronaći na: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Morate imati  root particiju.\n"
"Za ovo, kreirajte particiju (ili kliknite na postojeću).\n"
"Zatim izaberite \"Tačka montiranja\" i podesite na `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Hm, nema swap particije\n"
"\n"
"Svejedno nastaviti dalje ?"

#: install_interactive.pm:70 install_steps.pm:206
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Morate imati FAT particiju montiranu u /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Koristi postojeću particiju"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Nema ni jedne pariticije za rad"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Koristi Windows particiju za loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Koju particiju želite da korisite za Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Izaberite veličinu"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Veličina Root particije u MB:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Veličina Swap particije u MB:"

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Ne postoje FAT particije kojima se može promeniti veličina (ili nema "
"dovoljno slobodnog prostora)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Kojoj particiji  želite da promenite veličinu?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Program za promenu veličine FAT paritcija ne može da upravlja vašom "
"particijom, \n"
"zbog sledeće greške: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Proračunavam veličinu Windows particije"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""
"Vaša Windows particija je previše fragmentirana, prvo pokrenite ``defrag''"

#: install_interactive.pm:164
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"UPOZORENJE!\n"
"\n"
"DrakX treba da izmeni veličinu Windows particije. Budite pažljivi: ova\n"
"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da izađete\n"
"iz instalacije,pokrenete pod Windows-om\n"
"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
"Ako ste sigurni, pritisnite OK (U redu)."

#: install_interactive.pm:176
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Koju veličinu želite da zadržite za prozore"

#: install_interactive.pm:177
#, c-format
msgid "partition %s"
msgstr "particija %s "

#: install_interactive.pm:186
#, c-format
msgid "Resizing Windows partition"
msgstr "Proračunavam granice Windows fajl-sistema"

#: install_interactive.pm:191
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT izmena veličine neuspela: %s"

#: install_interactive.pm:206
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Ne postoje FAT particije kojima se može promeniti veličina  (ili nema "
"dovoljno slobodnog prostora)"

#: install_interactive.pm:211
#, c-format
msgid "Remove Windows(TM)"
msgstr "Ukloni Windows(TM)"

#: install_interactive.pm:213
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Imate više od jednog hard diska, na koji od njih želite da instalirate "
"Linux ?"

#: install_interactive.pm:217
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "SVE postojeće particije i podaci na disku %s će biti izgubljeni"

#: install_interactive.pm:230
#, c-format
msgid "Use fdisk"
msgstr "Koristi fdisk"

#: install_interactive.pm:233
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Sada možete particionirati vaš %s hard disk uređaj\n"
"Kada završite,ne zaboravite da potvrdite koristeći `w'"

#: install_interactive.pm:269
#, c-format
msgid "I can't find any room for installing"
msgstr "Ne mogu da pronađem slobodan prostor za instaliranje"

#: install_interactive.pm:273
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX čarobnjak za particioniranje je pronašao sledeća rešenja:"

#: install_interactive.pm:279
#, c-format
msgid "Partitioning failed: %s"
msgstr "Particioniranje nije uspelo: %s"

#: install_interactive.pm:286
#, c-format
msgid "Bringing up the network"
msgstr "Pristupam  mrežu"

#: install_interactive.pm:291
#, c-format
msgid "Bringing down the network"
msgstr "Odstupam od mreže"

#: install_messages.pm:9
#, fuzzy, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Upoznavanje\n"
"\n"
"Operativni sistem i druge komponente dostupne u Mandrakelinux distribuciji \n"
"na dalje će biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
"uključuju, ali nisu i \n"
"ograničeni na, skup programa, metoda, pravila i dokumentaciju koja je "
"vezanaza operativni \n"
"sistem i druge komponente Mandrakelinux distribucije.\n"
"\n"
"\n"
"1. Licencni ugovor\n"
"\n"
"Pažljivo pročitajte ovaj dokument. Ovaj dokument je licencni ugovor "
"izmeđuizmeđu vas i   \n"
"MandrakeSoft S.A. koji polaže pravo na Softverske Proizvode.\n"
"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
"vidu, vi eksplicitno \n"
"prihvatate i potpuno se slažete sa prihvatanjem postavki i uslova i stanja u "
"ovoj Licenci. \n"
"Ukoliko se ne slažete sa bilo kojim delom Licence, nemate pravo da "
"instalirate, kopirate ili koristite \n"
"Softverske proizvode. \n"
"Bilo koji pokušaj instalacije, dupliciranja ili upotrebe Softverskih "
"Proizvoda na način koji se ne slaže sa \n"
"postavkama i uslovima ove Licence će voditi gubitku vaših prava pod ovom \n"
"Licencom. Na osnovu gubitka Licence, morate odmah uništitisve kopije \n"
"Softverskih Proizvoda.\n"
"\n"
"\n"
"2. Ograničena Garancija\n"
"\n"
"Softverski Proizvodi i prateća dokumentracija su omogućene \"kao takve\", i "
"bez garancije, do granica \n"
"koje su dozvoljene zakonom.\n"
"MandrakeSoft S.A. neće, u svim uslovima i u granicama zakona, biti ogovoran "
"za bilo koje specijalne,\n"
"slučajne, direktne ili indirektne štete (uključujući neograničeneštete ili "
"gubitke \n"
"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tražnje i "
"kazne koje su rezultat sudske \n"
"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
"nemogućnosti korišćenja Softverskih \n"
"Proizvoda, čak iako je MandrakeSoft S.A. savetovao i ukazivao na mogućnost "
"pojave takve \n"
"štete.\n"
"\n"
"Ograničena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
"softvera u nekim zemljama\n"
"\n"
"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
"distributeri neće, ni pod kojim uslovima, biti \n"
"odgovorni za specijalne, namerne direktne ili indirektne štete(uključujući "
"neograničene \n"
"štete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
"zakonske tražnje \n"
"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
"proizilaze \n"
"iz upotrebe ili nemogućnosti korišćenja Softverskih Komponenti ili koje "
"proizilaze download-ovanih softverskih komponenti \n"
"bilo kog Mandrakelinux sajta koji su zabranjeni ili ograničeni u nekim "
"zemljama po lokalnim zakonima.\n"
"Ova ograničena prava se primenjuju, ali nisu i ograničena na,kriptografske "
"komponente \n"
"koje se nalaze u Softverskim Proizvodima.\n"
"\n"
"\n"
"3. GPL i za nju vezane Licence\n"
"\n"
"Softverski proizvodi se sastoje od komponenti kreiranih od strane različtih "
"lica ili entiteta. Većina  \n"
"od ovih komponenti se nalaze pod postavkama i uslovima GNU Opšte Javne \n"
"Licence, koja se od sada zove  \"GPL\", ili slične licence. Većina ovih "
"licenci dozvoljava upotrebu, \n"
"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
"Molimo Vas da pažljivo pročitte postavke \n"
"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
"komponenete. Bilo koje pitanje \n"
"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
"nena MandrakeSoft.\n"
"Programi koje je razvio MandrakeSoft S.A. podležu pod GPL Licencu. "
"Dokumentacija pisana od \n"
"strane MandrakeSoft S.A. podleže pod posebnu licencu. Molim da pogledate "
"dokumentaciju  \n"
"za detalje.\n"
"\n"
"\n"
"4. Prava na Intelektualnu svojinu\n"
"\n"
"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
"ona \n"
"su zaštićena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
"na softverske programe.\n"
"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
"SoftverskihProizvoda, kako za celinu tako i za \n"
"delove, za sve sve svrhe i sve upotrebe.\n"
"\"Mandrake\", \"Mandrakelinux\" i pridruženi logotipi i oznake MandrakeSoft "
"S.A.  \n"
"\n"
"\n"
"5. Zakonska prava \n"
"\n"
"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
"odluke, ovaj \n"
"deo se isključuje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
"ovog\n"
"ugovora.\n"
"Postavke i uslovi ove Licence su određeni Zakonima Francuske.\n"
"Svi nesporazumi bi trebali biti rešeni van suda. Kao poslednje \n"
"sredstvo, nesporazumi će biti upućeni na odgovarajuće Sudske ustanove u "
"Parizu - Francuska.\n"
"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
"MandrakeSoft S.A.  \n"

#: install_messages.pm:89
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#: install_messages.pm:96
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Upozorenje !\n"
"\n"
"Pažljivo pročitajte dole navedene uslove. Ukoliko se ne slažete sa bilo "
"kojim \n"
"delom, onda nemate odobrenje za instaliranje sledećeg CD-a. Pritisnite "
"'Odbijam' \n"
"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
"\n"
"\n"
"Neke komponente sadržane u sledećim CD medijama nisu pod\n"
"GPL Licencom ili sličnim ugovorima. Svaka takva komponenta je onda "
"uslovljena\n"
"uslovima i ugovorima sopstevene lincence. \n"
"Pažljivo pročitajte i upoznajte se sa takvim specifičnim licencama pre \n"
"nego uotrebite ili redistribuirate pomenute komponente. \n"
"Takve licence će u glavnom zabranjivati transfer, kopiranje \n"
"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
"Bilo koji deo ugovora koji nije ispoštovan istovremeno uklanja i ostala vaša "
"prava\n"
"u datoj licenci. Ukoliko vam određena licenca ne garantuje takva\n"
"prava, obično ne možete instalirati programe na više od jedanog\n"
"aiatema, ili ih prilagoditi da se mogu koristiti na mreži. Ukoliko ste u "
"dilemi, molimo vas da direktno \n"
"kontaktirate distributera ili editora komponente. \n"
"Prenos na treće programe ili kopiranje takvih komponenti uključujući i\n"
"dokumentaciju je obično zabranjen.\n"
"\n"
"\n"
"Sva prava na komponente na sledećim CD medijama pripadaju njihovim \n"
"respektativnim autorima i zaštićene su zakonima o intelektuanoj svojini i \n"
"pravima koji se primenjuju na softverske programe.\n"

#: install_messages.pm:128
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"Čestitamo, instalacija je završena.\n"
"Izvadite disketu iz drajva i pritisnite <Enter> da se računar resetuje.\n"
"\n"
"\n"
"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
"Mandrakelinux Linux-a, pročitajte deo 'Errata' koji možete naći na\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informacije o konfigurisanju vašeg sistema možete naći u post-instalacionom\n"
"poglavlju zvaničnog Mandrakelinux 'Vodiča za korisnike'."

#: install_messages.pm:141
#, c-format
msgid "http://www.mandrakelinux.com/en/100errata.php3"
msgstr "http://www.mandrakelinux.com/en/100errata.php3"

#: install_steps.pm:241
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duplirana tačka montiranja %s"

#: install_steps.pm:406
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Neki važni paketi nisu dobro instalirani.\n"
"Vaš cdrom uređaj ili cd su neispravni.\n"
"Proverite cdrom na instaliranom kompjuteru koristeće \"rpm -qpl Mandrake/"
"RPMS/*.rpm\"\n"

#: install_steps.pm:535
#, c-format
msgid "No floppy drive available"
msgstr "Nepristupačan disketni uređaj"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Pokrećem korak `%s'\n"

#: install_steps_gtk.pm:178
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Vaš sistem ima manjak snage. Usled toga možete imati problema pri "
"instalaciji\n"
"Mandrakelinux. Ukoliko se oni pojave, možete probati tekstualnu instalaciju. "
"Da bi to postigli,\n"
"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."

#: install_steps_gtk.pm:232 install_steps_interactive.pm:580
#, c-format
msgid "Package Group Selection"
msgstr "Odabir grupa paketa"

#: install_steps_gtk.pm:294 install_steps_interactive.pm:519
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukupna veličina: %d / %d MB"

#: install_steps_gtk.pm:340
#, c-format
msgid "Bad package"
msgstr "Loš paket"

#: install_steps_gtk.pm:342
#, fuzzy, c-format
msgid "Version: "
msgstr "Verzija: %s\n"

#: install_steps_gtk.pm:343
#, fuzzy, c-format
msgid "Size: "
msgstr "Veličina: %s"

#: install_steps_gtk.pm:343
#, fuzzy, c-format
msgid "%d KB\n"
msgstr "Veličina: %d KB\n"

#: install_steps_gtk.pm:344
#, fuzzy, c-format
msgid "Importance: "
msgstr "Važno: %s\n"

#: install_steps_gtk.pm:377
#, c-format
msgid "You can't select/unselect this package"
msgstr "Ne možete selektovati/deselektovati ovaj paket"

#: install_steps_gtk.pm:381
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "nedostaje kdesu"

#: install_steps_gtk.pm:382
#, c-format
msgid "due to unsatisfied %s"
msgstr "zbog ne zadovoljenog %s"

#: install_steps_gtk.pm:383
#, c-format
msgid "trying to promote %s"
msgstr "pokušavam da prikažem %s"

#: install_steps_gtk.pm:384
#, c-format
msgid "in order to keep %s"
msgstr "da bih zadržao %s"

#: install_steps_gtk.pm:389
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Ne možete selektovati ovaj paket jer nema više slobodnog prostora"

#: install_steps_gtk.pm:392
#, c-format
msgid "The following packages are going to be installed"
msgstr "Sledeći paketi treba da budu instalirani"

#: install_steps_gtk.pm:393
#, c-format
msgid "The following packages are going to be removed"
msgstr "Sledeći paketi će biti izbrisani"

#: install_steps_gtk.pm:417
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Ovo je obavezni paket,i ne može biti deselektovan"

#: install_steps_gtk.pm:419
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Možete deselektovati ovaj paket jer je već instaliran"

#: install_steps_gtk.pm:422
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Ovaj paket mora biti ažuriran\n"
"Da li sigurno želite da ga deselektujete ?"

#: install_steps_gtk.pm:425
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Ne možete deselektovati ovaj paket.On mora biti ažuriran"

#: install_steps_gtk.pm:430
#, c-format
msgid "Show automatically selected packages"
msgstr "Automatski prikaži izabrane pakete"

#: install_steps_gtk.pm:435
#, c-format
msgid "Load/Save on floppy"
msgstr "Učitaj/Snimi na disketu"

#: install_steps_gtk.pm:436
#, c-format
msgid "Updating package selection"
msgstr "Ažuriranje selekcije paketa"

#: install_steps_gtk.pm:441
#, c-format
msgid "Minimal install"
msgstr "Minimalno instaliraj"

#: install_steps_gtk.pm:455 install_steps_interactive.pm:427
#, c-format
msgid "Choose the packages you want to install"
msgstr "Izaberi pakete za instalaciju"

#: install_steps_gtk.pm:471 install_steps_interactive.pm:666
#, c-format
msgid "Installing"
msgstr "Instaliram"

#: install_steps_gtk.pm:477
#, c-format
msgid "No details"
msgstr "Bez detalja"

#: install_steps_gtk.pm:478
#, c-format
msgid "Estimating"
msgstr "Procenjujem"

#: install_steps_gtk.pm:484
#, c-format
msgid "Time remaining "
msgstr "Preostalo vreme"

#: install_steps_gtk.pm:496
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Samo momenat, pripremam instalaciju"

#: install_steps_gtk.pm:557
#, c-format
msgid "%d packages"
msgstr "%d paketa"

#: install_steps_gtk.pm:562
#, c-format
msgid "Installing package %s"
msgstr "Instaliram paket %s"

#: install_steps_gtk.pm:598 install_steps_interactive.pm:88
#: install_steps_interactive.pm:690
#, c-format
msgid "Refuse"
msgstr "Odbaci"

#: install_steps_gtk.pm:599 install_steps_interactive.pm:691
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Promenite vaš Cd-Rom!\n"
"\n"
"Ubacite vaš CD označen sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
"spremni.\n"
"Ukoliko ga nemate pritisnite  Poništi."

#: install_steps_gtk.pm:614 install_steps_interactive.pm:703
#, c-format
msgid "There was an error ordering packages:"
msgstr "Greška u listi paketa:"

#: install_steps_gtk.pm:614 install_steps_gtk.pm:618
#: install_steps_interactive.pm:703 install_steps_interactive.pm:707
#, c-format
msgid "Go on anyway?"
msgstr "Svejedno nastaviti dalje ?"

#: install_steps_gtk.pm:618 install_steps_interactive.pm:707
#, c-format
msgid "There was an error installing packages:"
msgstr "Greška pri instalaciji paketa:"

#: install_steps_gtk.pm:658 install_steps_interactive.pm:875
#: install_steps_interactive.pm:1027
#, c-format
msgid "not configured"
msgstr "nije podešeno"

#: install_steps_interactive.pm:81
#, fuzzy, c-format
msgid "Do you want to recover your system?"
msgstr "Da li želite da koristite aboot ?"

#: install_steps_interactive.pm:82
#, c-format
msgid "License agreement"
msgstr "LIcencirani ugovor"

#: install_steps_interactive.pm:111
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Izaberite  raspored tastature."

#: install_steps_interactive.pm:113
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Ovde je predstavljena cela lista dostupnih tastatura"

#: install_steps_interactive.pm:143
#, c-format
msgid "Install/Upgrade"
msgstr "Instalacija/Ažuriranje"

#: install_steps_interactive.pm:144
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Da li je ovo instalacija ili ažuriranje?"

#: install_steps_interactive.pm:150
#, c-format
msgid "Upgrade %s"
msgstr "Ažuriranje %s"

#: install_steps_interactive.pm:160
#, fuzzy, c-format
msgid "Encryption key for %s"
msgstr "Ključ za enkripciju"

#: install_steps_interactive.pm:177
#, c-format
msgid "Please choose your type of mouse."
msgstr "Izaberite tip miša."

#: install_steps_interactive.pm:186 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Port za miša"

#: install_steps_interactive.pm:187 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Izaberite na koji serijski port je vaš miš priključen."

#: install_steps_interactive.pm:197
#, c-format
msgid "Buttons emulation"
msgstr "Emulacija tastera"

#: install_steps_interactive.pm:199
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulacija 2 tastera"

#: install_steps_interactive.pm:200
#, c-format
msgid "Button 3 Emulation"
msgstr "EmulaciŮa 3 tastera"

#: install_steps_interactive.pm:221
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:221
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Konfigurišem PCMCIA kartice..."

#: install_steps_interactive.pm:228
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:228
#, c-format
msgid "Configuring IDE"
msgstr "Konfiguracija  IDE"

#: install_steps_interactive.pm:248 network/tools.pm:195
#, c-format
msgid "No partition available"
msgstr "nema dostupnih particija"

#: install_steps_interactive.pm:251
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Skeniranje particija za pronalaženje tačke montiranja"

#: install_steps_interactive.pm:258
#, c-format
msgid "Choose the mount points"
msgstr "Izaberite tačke montiranja"

#: install_steps_interactive.pm:288
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Nema slobodnog prostora za 1MB bootstrap! Instalacija đe se nastaviti, ali "
"da bi podigli vašsistem, morađete da kreirate bootstrap particiju u "
"DiskDrake-u"

#: install_steps_interactive.pm:325
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Izaberi particije za formatiranje"

#: install_steps_interactive.pm:327
#, c-format
msgid "Check bad blocks?"
msgstr "Proveri loše blokove ?"

#: install_steps_interactive.pm:359
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Neuspešna prvera fajl sistema %s. Da li želite da popravite greške? (budite "
"pažljivi, možete izgubiti podatke)"

#: install_steps_interactive.pm:362
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nema dovoljno swap-a da završi instalaciju, dodajte još swap-a"

#: install_steps_interactive.pm:369
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Tražim dustupne pakete za reizgradnju rpm baze podataka..."

#: install_steps_interactive.pm:370 install_steps_interactive.pm:389
#, c-format
msgid "Looking for available packages..."
msgstr "Tražim pakete"

#: install_steps_interactive.pm:373
#, c-format
msgid "Looking at packages already installed..."
msgstr "Tražim već instalirane pakete..."

#: install_steps_interactive.pm:377
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Tražim pakete za ažuriranje..."

#: install_steps_interactive.pm:398
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "Vaš sistem nema dovoljno mesta za instalaciju ili ažuriranje (%d > %d)"

#: install_steps_interactive.pm:439
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Molim Vas da izaberete učitavanje ili snimanje selekcije paketa na disketu.\n"
"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."

#: install_steps_interactive.pm:441
#, c-format
msgid "Load from floppy"
msgstr "Učitaj sa diskete"

#: install_steps_interactive.pm:441
#, c-format
msgid "Save on floppy"
msgstr "Snimi na disketu"

#: install_steps_interactive.pm:445
#, c-format
msgid "Package selection"
msgstr "Odabir paketa"

#: install_steps_interactive.pm:445
#, c-format
msgid "Loading from floppy"
msgstr "Učitavam sa diskete"

#: install_steps_interactive.pm:450
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Ubacite disketu koja sadrži selekciju paketa"

#: install_steps_interactive.pm:533
#, c-format
msgid "Selected size is larger than available space"
msgstr "Selektovana veličina je veđa od slobodnog prostora"

#: install_steps_interactive.pm:548
#, c-format
msgid "Type of install"
msgstr "Tip instalacije"

#: install_steps_interactive.pm:549
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Niste selektovali nijednu grupu paketa.\n"
"Izaberite minimalnu instalaciju koju želite:"

#: install_steps_interactive.pm:553
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Sa osnovnom dokumentacijom (preporuka!)"

#: install_steps_interactive.pm:554
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"

#: install_steps_interactive.pm:597 standalone/drakxtv:50
#, c-format
msgid "All"
msgstr "Sve"

#: install_steps_interactive.pm:641
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."

#: install_steps_interactive.pm:646
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom označen kao \"%s"

#: install_steps_interactive.pm:666
#, c-format
msgid "Preparing installation"
msgstr "Pripremam instalaciju"

#: install_steps_interactive.pm:675
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instaliram pakete %s\n"
"%d%%"

#: install_steps_interactive.pm:721
#, c-format
msgid "Post-install configuration"
msgstr "Postinstalaciona konfiguracija"

#: install_steps_interactive.pm:727
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Ubacite Boot disketu u uređaj %s"

#: install_steps_interactive.pm:733
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Ubacite Update Modules disketu u uređaj %s"

#: install_steps_interactive.pm:754
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Sada imate mogućnost da download-ujete ažurirane pakete koji su\n"
"kreirani nakon izlaska distribucije.\n"
"Oni mogu sadržavati ispravke grešaka i sigurnosnih rupa\n"
"\n"
"Da bi skinuli ove pakete morate da imate podešenu Internet konekciju.\n"
"\n"
"da li želite da instalirate update-ove ?"

#: install_steps_interactive.pm:775
#, c-format
msgid ""
"Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr ""
"KOntaktirajte Mandrakelinux web sajt da bi dobili listu dostupnih mirror-a"

#: install_steps_interactive.pm:780
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Izaberite mirror sa kog ćete skinuti pakete"

#: install_steps_interactive.pm:794
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Kantaktirajte mirror za listu mogućih paketa"

#: install_steps_interactive.pm:798
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Ne mogu da kontaktiram miror %s"

#: install_steps_interactive.pm:798
#, c-format
msgid "Would you like to try again?"
msgstr "Da li želite da probate ponovo?"

#: install_steps_interactive.pm:824 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "Koja je vaša vremenska zona ?"

#: install_steps_interactive.pm:829
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatska sinhronizacija vremena (preko NTP-a)"

#: install_steps_interactive.pm:837
#, c-format
msgid "NTP Server"
msgstr "NTP Server"

#: install_steps_interactive.pm:879 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Sažetak"

#: install_steps_interactive.pm:892 install_steps_interactive.pm:900
#: install_steps_interactive.pm:918 install_steps_interactive.pm:925
#: install_steps_interactive.pm:1074 services.pm:135
#: standalone/drakbackup:1663
#, c-format
msgid "System"
msgstr "Sistem"

#: install_steps_interactive.pm:932 install_steps_interactive.pm:959
#: install_steps_interactive.pm:976 install_steps_interactive.pm:992
#: install_steps_interactive.pm:1003
#, c-format
msgid "Hardware"
msgstr "Hardver"

#: install_steps_interactive.pm:938 install_steps_interactive.pm:947
#, c-format
msgid "Remote CUPS server"
msgstr "Udaljeni CUPS server"

#: install_steps_interactive.pm:938
#, c-format
msgid "No printer"
msgstr "Bez štampača"

#: install_steps_interactive.pm:980
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Da li imate ISA zvučnu karticu?"

#: install_steps_interactive.pm:982
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Pokrenite \"sndconfig\" nakon isntalacije da bi podesili svoju zvučnu karticu"

#: install_steps_interactive.pm:984
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Nije detektovana zvučna kartica. Pokrenite \"harddrake\" nakon instalacije"

#: install_steps_interactive.pm:1004
#, c-format
msgid "Graphical interface"
msgstr "Grafički interfejs"

#: install_steps_interactive.pm:1010 install_steps_interactive.pm:1025
#, c-format
msgid "Network & Internet"
msgstr "Mreža i Internet"

#: install_steps_interactive.pm:1026
#, fuzzy, c-format
msgid "Proxies"
msgstr "Profil "

#: install_steps_interactive.pm:1027
#, fuzzy, c-format
msgid "configured"
msgstr "ponovo podesi"

#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1050
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "Sigurnost"

#: install_steps_interactive.pm:1055
#, c-format
msgid "activated"
msgstr "Aktivirano"

#: install_steps_interactive.pm:1055
#, c-format
msgid "disabled"
msgstr "onemogućeno"

#: install_steps_interactive.pm:1064
#, c-format
msgid "Boot"
msgstr "Startanje"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1068
#, fuzzy, c-format
msgid "%s on %s"
msgstr "%s (Port %s)"

#: install_steps_interactive.pm:1079 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Servisi: %d aktiviranih za %d registrovanih"

#: install_steps_interactive.pm:1089
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Niste podesili X. Da li ste sigurni da želite to?"

#: install_steps_interactive.pm:1147
#, fuzzy, c-format
msgid "Set root password and network authentication methods"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: install_steps_interactive.pm:1148
#, c-format
msgid "Set root password"
msgstr "Unesi root lozinku"

#: install_steps_interactive.pm:1158
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Ova lozinka je suviše jednostavna (treba da ima bar %d znakova)"

#: install_steps_interactive.pm:1163 network/netconnect.pm:576
#: standalone/drakauth:26 standalone/drakconnect:451
#, c-format
msgid "Authentication"
msgstr "Autentifikacija"

#: install_steps_interactive.pm:1194
#, c-format
msgid "Preparing bootloader..."
msgstr "Pripremam starter..."

#: install_steps_interactive.pm:1204
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Pošto izgleda da imate staromodnu ili nepoznatu \n"
" mašinu, yaboot starter neđe raditi kod vas.\n"
"Instalacija će biti nastavljena, ali ćete morati da\n"
"koristite  BootX ili nešto drugo da bi podigli sistem"

#: install_steps_interactive.pm:1210
#, c-format
msgid "Do you want to use aboot?"
msgstr "Da li želite da koristite aboot ?"

#: install_steps_interactive.pm:1213
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Greška pri instalaciji aboot-a, \n"
"Da li da probam da instaliram čak ako to vodi uništenju prve particije?"

#: install_steps_interactive.pm:1224
#, c-format
msgid "Installing bootloader"
msgstr "Instaliram starter"

#: install_steps_interactive.pm:1231
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Instalacija startera neuspela. Greška je:"

#: install_steps_interactive.pm:1236
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Moraćete da promenite Open Firmware boot-uređaj da \n"
" bi mogli da koristite starter.  Ukoliko ne vidite prompt\n"
" pri restartu držite Command-Option-O-F pri startanju i unesite:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Onda ukucajte: shut-down\n"
"Kada sledeći put startujete mašinu trebali bi da vidite staterov prompt."

#: install_steps_interactive.pm:1249
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1281 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Ubacite praznu disketu u uređaj %s"

#: install_steps_interactive.pm:1286
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Ubacite Boot disketu u uređaj %s"

#: install_steps_interactive.pm:1288
#, c-format
msgid "Creating auto install floppy..."
msgstr "Kreiram auto instalacioni flopi"

#: install_steps_interactive.pm:1300
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Neki koraci nisu kompletirani.\n"
"\n"
"Da li stvarno želite da završite ?"

#: install_steps_interactive.pm:1315
#, c-format
msgid "Generate auto install floppy"
msgstr "Kreiraj auto instalacionu disketu"

#: install_steps_interactive.pm:1317
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Auto instalacija može biti potpuno automatizovana ukoliko želite,\n"
"u tom slučaju preuzeće kontrolu nad hard-diskom!!\n"
"(ovo se odnosi na instalaciju na drugoj mašini).\n"
"\n"
"Možda volite da ponovite instalaciju.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr "Mandrakelinux Instalacija %s"

#: install_steps_newt.pm:33
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"<Tab>/<Alt-Tab> kret. između elemenata | <Space> izbor | <F12> sledeći ekran"

#: interactive.pm:170
#, c-format
msgid "Choose a file"
msgstr "Izaberite fajl"

#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr "Osnovno"

#: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:510
#, c-format
msgid "Finish"
msgstr "Kraj"

#: interactive/newt.pm:83
#, c-format
msgid "Do"
msgstr "Uradi"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Loš izbor, probajte ponovo\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Vaš izbor ? (po default-u %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Unosi koje treba da popunite:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Vaš izbor? (0/1, default `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Taster `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Da li želite da kliknete na ovaj taster? "

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Vaš izbor? (default `%s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " unesite `void' za void unos"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Postoji mnogo stvari za izbor iz (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Izaberite prvi broj od 10 koje želite da editujete,\n"
"ili samo kliknite na Enter da bi nastavili.\n"
"Vaš izbor? "

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Napomena, promenjeno ime:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Re-submit"

#: keyboard.pm:137 keyboard.pm:169
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Češki (QWERTZ)"

#: keyboard.pm:138 keyboard.pm:171
#, c-format
msgid "German"
msgstr "Nemački"

#: keyboard.pm:139
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: keyboard.pm:140 keyboard.pm:179
#, c-format
msgid "Spanish"
msgstr "Španski"

#: keyboard.pm:141 keyboard.pm:180
#, c-format
msgid "Finnish"
msgstr "Finski"

#: keyboard.pm:142 keyboard.pm:181
#, c-format
msgid "French"
msgstr "Francuski"

#: keyboard.pm:143 keyboard.pm:220
#, c-format
msgid "Norwegian"
msgstr "Norveški"

#: keyboard.pm:144
#, c-format
msgid "Polish"
msgstr "Poljski"

#: keyboard.pm:145 keyboard.pm:229
#, c-format
msgid "Russian"
msgstr "Ruski"

#: keyboard.pm:147 keyboard.pm:233
#, c-format
msgid "Swedish"
msgstr "Švedski"

#: keyboard.pm:148 keyboard.pm:252
#, c-format
msgid "UK keyboard"
msgstr "UK tastatura"

#: keyboard.pm:149 keyboard.pm:253
#, c-format
msgid "US keyboard"
msgstr "US tastatura"

#: keyboard.pm:151
#, c-format
msgid "Albanian"
msgstr "Albanski"

#: keyboard.pm:152
#, c-format
msgid "Armenian (old)"
msgstr "Jermenski (stari)"

#: keyboard.pm:153
#, c-format
msgid "Armenian (typewriter)"
msgstr "Jermenski (typewriter)"

#: keyboard.pm:154
#, c-format
msgid "Armenian (phonetic)"
msgstr "Jermenski (fonetski)"

#: keyboard.pm:155
#, c-format
msgid "Arabic"
msgstr "Arapski"

#: keyboard.pm:156
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbejdzan  (latinica)"

#: keyboard.pm:158
#, c-format
msgid "Belgian"
msgstr "Belgijski"

#: keyboard.pm:159
#, c-format
msgid "Bengali"
msgstr "Bengalski"

#: keyboard.pm:160
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Bugarski (fonetski)"

#: keyboard.pm:161
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Bugarski (BDS)"

#: keyboard.pm:162
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brazilski (ABNT-2)"

#: keyboard.pm:165
#, c-format
msgid "Bosnian"
msgstr "Bosanski"

#: keyboard.pm:166
#, c-format
msgid "Belarusian"
msgstr "Beloruski"

#: keyboard.pm:167
#, c-format
msgid "Swiss (German layout)"
msgstr "Švajcarski (Nemački raspored)"

#: keyboard.pm:168
#, c-format
msgid "Swiss (French layout)"
msgstr "Švajcarski (Francuski  raspored)"

#: keyboard.pm:170
#, c-format
msgid "Czech (QWERTY)"
msgstr "Češki (QWERTY)"

#: keyboard.pm:172
#, c-format
msgid "German (no dead keys)"
msgstr "Nemački (bez mrtvih tastera)"

#: keyboard.pm:173
#, c-format
msgid "Devanagari"
msgstr "Devanagri"

#: keyboard.pm:174
#, c-format
msgid "Danish"
msgstr "Danski"

#: keyboard.pm:175
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:176
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norveški)"

#: keyboard.pm:177
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Švedski)"

#: keyboard.pm:178
#, c-format
msgid "Estonian"
msgstr "Estonski"

#: keyboard.pm:182
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Gruzijski (\"Ruski\" raspored)"

#: keyboard.pm:183
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Gruzijski (\"Latinični\" rapored)"

#: keyboard.pm:184
#, c-format
msgid "Greek"
msgstr "Grčki"

#: keyboard.pm:185
#, c-format
msgid "Greek (polytonic)"
msgstr ""

#: keyboard.pm:186
#, c-format
msgid "Gujarati"
msgstr "Gujarati"

#: keyboard.pm:187
#, c-format
msgid "Gurmukhi"
msgstr "Gurmuki"

#: keyboard.pm:188
#, c-format
msgid "Hungarian"
msgstr "Mađarski"

#: keyboard.pm:189
#, c-format
msgid "Croatian"
msgstr "Hrvatski"

#: keyboard.pm:190
#, c-format
msgid "Irish"
msgstr ""

#: keyboard.pm:191
#, c-format
msgid "Israeli"
msgstr "Jevrejski"

#: keyboard.pm:192
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Jevrejski (Fonetski)"

#: keyboard.pm:193
#, c-format
msgid "Iranian"
msgstr "Iranski"

#: keyboard.pm:194
#, c-format
msgid "Icelandic"
msgstr "Islandski"

#: keyboard.pm:195
#, c-format
msgid "Italian"
msgstr "Italijanski"

#: keyboard.pm:196
#, c-format
msgid "Inuktitut"
msgstr "Inuktitut"

#: keyboard.pm:200
#, c-format
msgid "Japanese 106 keys"
msgstr "Japanski 106 tastera"

#: keyboard.pm:201
#, fuzzy, c-format
msgid "Kannada"
msgstr "Kanada"

#: keyboard.pm:204
#, c-format
msgid "Korean keyboard"
msgstr "Korejanska tastatura"

#: keyboard.pm:205
#, c-format
msgid "Latin American"
msgstr "Latino-Američki"

#: keyboard.pm:206
#, c-format
msgid "Laotian"
msgstr "Laoski"

#: keyboard.pm:207
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Litvanski AZERTY(stari)"

#: keyboard.pm:209
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Litvanski AZERTY(novi)"

#: keyboard.pm:210
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litvanski \"number row\"QWERTY"

#: keyboard.pm:211
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litvanski \"fonetski\" QWERTY"

#: keyboard.pm:212
#, c-format
msgid "Latvian"
msgstr "Letonski"

#: keyboard.pm:213
#, c-format
msgid "Malayalam"
msgstr "Malajski"

#: keyboard.pm:214
#, c-format
msgid "Macedonian"
msgstr "Makedonski"

#: keyboard.pm:215
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Mijanmar (Burma)"

#: keyboard.pm:216
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongolski (ćirilica)"

#: keyboard.pm:217
#, c-format
msgid "Maltese (UK)"
msgstr "Malteški (UK)"

#: keyboard.pm:218
#, c-format
msgid "Maltese (US)"
msgstr "Malteški (US)"

#: keyboard.pm:219
#, c-format
msgid "Dutch"
msgstr "Danski"

#: keyboard.pm:221
#, fuzzy, c-format
msgid "Oriya"
msgstr "Sirija"

#: keyboard.pm:222
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Poljski (qwerty raspored)"

#: keyboard.pm:223
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Poljski (qwertz raspored)"

#: keyboard.pm:224
#, c-format
msgid "Portuguese"
msgstr "Portugalski"

#: keyboard.pm:225
#, c-format
msgid "Canadian (Quebec)"
msgstr "Kanadski (Kvebek)"

#: keyboard.pm:227
#, c-format
msgid "Romanian (qwertz)"
msgstr "Rumunski (qwertz)"

#: keyboard.pm:228
#, c-format
msgid "Romanian (qwerty)"
msgstr "Rumunski (qwerty)"

#: keyboard.pm:230
#, c-format
msgid "Russian (Phonetic)"
msgstr "Ruski (Fonetski)"

#: keyboard.pm:231
#, fuzzy, c-format
msgid "Saami (norwegian)"
msgstr "Dvorak (Norveški)"

#: keyboard.pm:232
#, c-format
msgid "Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:234
#, c-format
msgid "Slovenian"
msgstr "Slovenački"

#: keyboard.pm:235
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slovački (QWERTZ)"

#: keyboard.pm:236
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slovački (QWERTY)"

#: keyboard.pm:238
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Srpski (ćirilica)"

#: keyboard.pm:239
#, fuzzy, c-format
msgid "Syriac"
msgstr "Sirija"

#: keyboard.pm:240
#, fuzzy, c-format
msgid "Syriac (phonetic)"
msgstr "Jermenski (fonetski)"

#: keyboard.pm:241
#, fuzzy, c-format
msgid "Telugu"
msgstr "Tokelau"

#: keyboard.pm:243
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamilski (ISCII-raspored)"

#: keyboard.pm:244
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamilski (raspored na pisaćoj mašini)"

#: keyboard.pm:245
#, c-format
msgid "Thai keyboard"
msgstr " Thai tastatura"

#: keyboard.pm:247
#, c-format
msgid "Tajik keyboard"
msgstr "Tadžikistanska tastatura"

#: keyboard.pm:248
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Turski (tradicionalni \"F\" model)"

#: keyboard.pm:249
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Turski (moderni \"Q\" model)"

#: keyboard.pm:251
#, c-format
msgid "Ukrainian"
msgstr "Ukrajinski"

#: keyboard.pm:254
#, c-format
msgid "US keyboard (international)"
msgstr "US tastatura (internacionalna)"

#: keyboard.pm:255
#, fuzzy, c-format
msgid "Uzbek (cyrillic)"
msgstr "Srpski (ćirilica)"

#: keyboard.pm:256
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vijetnamski  \"number row\"QWERTY"

#: keyboard.pm:257
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Srpski (latinica)"

#: keyboard.pm:264
#, c-format
msgid "Right Alt key"
msgstr "Desni Alt taster"

#: keyboard.pm:265
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: keyboard.pm:266
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control i  Shift tasteri istovremeno"

#: keyboard.pm:267
#, c-format
msgid "CapsLock key"
msgstr "CapsLock taster"

#: keyboard.pm:268
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl i Alt tasteri istovremeno"

#: keyboard.pm:269
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt i Shift tasteri istovremeno"

#: keyboard.pm:270
#, c-format
msgid "\"Menu\" key"
msgstr "\"Meni\" taster"

#: keyboard.pm:271
#, c-format
msgid "Left \"Windows\" key"
msgstr "Levi \"Windows\" taster"

#: keyboard.pm:272
#, c-format
msgid "Right \"Windows\" key"
msgstr "Desni \"Windows\" taster"

#: keyboard.pm:273
#, fuzzy, c-format
msgid "Both Control keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: keyboard.pm:274
#, fuzzy, c-format
msgid "Both Alt keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: keyboard.pm:275
#, fuzzy, c-format
msgid "Left Shift key"
msgstr "Levi \"Windows\" taster"

#: keyboard.pm:276
#, fuzzy, c-format
msgid "Right Shift key"
msgstr "Desni Alt taster"

#: keyboard.pm:277
#, fuzzy, c-format
msgid "Left Alt key"
msgstr "Desni Alt taster"

#: keyboard.pm:278
#, fuzzy, c-format
msgid "Left Control key"
msgstr "Udaljena kontrola"

#: keyboard.pm:279
#, fuzzy, c-format
msgid "Right Control key"
msgstr "Desni Alt taster"

#: keyboard.pm:310
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Ovde možete izabrati taster ili kombinaciju tastera koja će \n"
"dozvoliti izmenu rasporeda tastatura\n"
"(npr: latin i non latin)"

#: keyboard.pm:315
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#: lang.pm:151
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:167
#, c-format
msgid "Afghanistan"
msgstr "Avganistan"

#: lang.pm:168
#, c-format
msgid "Andorra"
msgstr "Andora"

#: lang.pm:169
#, c-format
msgid "United Arab Emirates"
msgstr "Ujedinjeni Arapski Emirati"

#: lang.pm:170
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigva i Barbuda"

#: lang.pm:171
#, c-format
msgid "Anguilla"
msgstr "Anigla"

#: lang.pm:172
#, c-format
msgid "Albania"
msgstr "Albanija"

#: lang.pm:173
#, c-format
msgid "Armenia"
msgstr "Jermenija"

#: lang.pm:174
#, c-format
msgid "Netherlands Antilles"
msgstr "Holandski Antili"

#: lang.pm:175
#, c-format
msgid "Angola"
msgstr "Angola"

#: lang.pm:176
#, c-format
msgid "Antarctica"
msgstr "Antartik"

#: lang.pm:177 standalone/drakxtv:48
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: lang.pm:178
#, c-format
msgid "American Samoa"
msgstr "Američka Samoa"

#: lang.pm:180 standalone/drakxtv:46
#, c-format
msgid "Australia"
msgstr "Australija"

#: lang.pm:181
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:182
#, c-format
msgid "Azerbaijan"
msgstr "Azerbejdžan"

#: lang.pm:183
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosna i Hrecegovina"

#: lang.pm:184
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:185
#, c-format
msgid "Bangladesh"
msgstr "Bangladeš"

#: lang.pm:187
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:188
#, c-format
msgid "Bulgaria"
msgstr "Bugarska"

#: lang.pm:189
#, c-format
msgid "Bahrain"
msgstr "Bahrein"

#: lang.pm:190
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: lang.pm:191
#, c-format
msgid "Benin"
msgstr "Benin"

#: lang.pm:192
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: lang.pm:193
#, c-format
msgid "Brunei Darussalam"
msgstr "Bruneji Darussalam"

#: lang.pm:194
#, c-format
msgid "Bolivia"
msgstr "Bolivija"

#: lang.pm:195
#, c-format
msgid "Brazil"
msgstr "Brazil"

#: lang.pm:196
#, c-format
msgid "Bahamas"
msgstr "Bahami"

#: lang.pm:197
#, c-format
msgid "Bhutan"
msgstr "Butan"

#: lang.pm:198
#, c-format
msgid "Bouvet Island"
msgstr "Ostrva Buve"

#: lang.pm:199
#, c-format
msgid "Botswana"
msgstr "Bocvana"

#: lang.pm:200
#, c-format
msgid "Belarus"
msgstr "Beolorusija"

#: lang.pm:201
#, c-format
msgid "Belize"
msgstr "Belize"

#: lang.pm:202
#, c-format
msgid "Canada"
msgstr "Kanada"

#: lang.pm:203
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Kokos (Kelingova) Ostrva"

#: lang.pm:204
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Kongo (Kinšasa)"

#: lang.pm:205
#, c-format
msgid "Central African Republic"
msgstr "Centralno Afrička Republika"

#: lang.pm:206
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongo (Brazavil)"

#: lang.pm:207
#, c-format
msgid "Switzerland"
msgstr "Švajcarska"

#: lang.pm:208
#, c-format
msgid "Cote d'Ivoire"
msgstr "Obala slonovače"

#: lang.pm:209
#, c-format
msgid "Cook Islands"
msgstr "Kukova Ostrva"

#: lang.pm:210
#, c-format
msgid "Chile"
msgstr "Čile"

#: lang.pm:211
#, c-format
msgid "Cameroon"
msgstr "Kamerun"

#: lang.pm:212
#, c-format
msgid "China"
msgstr "Kina"

#: lang.pm:213
#, c-format
msgid "Colombia"
msgstr "Kolumbija"

#: lang.pm:215
#, c-format
msgid "Cuba"
msgstr "Kuba"

#: lang.pm:216
#, c-format
msgid "Cape Verde"
msgstr "Kape Verde"

#: lang.pm:217
#, c-format
msgid "Christmas Island"
msgstr "Uskršnja ostrava"

#: lang.pm:218
#, c-format
msgid "Cyprus"
msgstr "Kipar"

#: lang.pm:221
#, c-format
msgid "Djibouti"
msgstr "Džibuti"

#: lang.pm:222
#, c-format
msgid "Denmark"
msgstr "Danska"

#: lang.pm:223
#, c-format
msgid "Dominica"
msgstr "Dominikana"

#: lang.pm:224
#, c-format
msgid "Dominican Republic"
msgstr "Dominikanska Republika"

#: lang.pm:225
#, c-format
msgid "Algeria"
msgstr "Alžir"

#: lang.pm:226
#, c-format
msgid "Ecuador"
msgstr "Ekvador"

#: lang.pm:227
#, c-format
msgid "Estonia"
msgstr "Estonija"

#: lang.pm:228
#, c-format
msgid "Egypt"
msgstr "Egipat"

#: lang.pm:229
#, c-format
msgid "Western Sahara"
msgstr "Zapadna Sahara"

#: lang.pm:230
#, c-format
msgid "Eritrea"
msgstr "Eritreja"

#: lang.pm:231 network/adsl_consts.pm:202 network/adsl_consts.pm:210
#: network/adsl_consts.pm:219 network/adsl_consts.pm:230
#, c-format
msgid "Spain"
msgstr "Španija"

#: lang.pm:232
#, c-format
msgid "Ethiopia"
msgstr "Etiopija"

#: lang.pm:233 network/adsl_consts.pm:127
#, c-format
msgid "Finland"
msgstr "Finska"

#: lang.pm:234
#, c-format
msgid "Fiji"
msgstr "Fidži"

#: lang.pm:235
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Foklandska Ostrva"

#: lang.pm:236
#, c-format
msgid "Micronesia"
msgstr "Mikronezija"

#: lang.pm:237
#, c-format
msgid "Faroe Islands"
msgstr "Farska Ostrva"

#: lang.pm:239
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: lang.pm:240 network/adsl_consts.pm:247 network/adsl_consts.pm:255
#: network/netconnect.pm:51
#, c-format
msgid "United Kingdom"
msgstr "Velika Britanija"

#: lang.pm:241
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: lang.pm:242
#, c-format
msgid "Georgia"
msgstr "Gruzija"

#: lang.pm:243
#, c-format
msgid "French Guiana"
msgstr "Francuska Gvajana"

#: lang.pm:244
#, c-format
msgid "Ghana"
msgstr "Gana"

#: lang.pm:245
#, c-format
msgid "Gibraltar"
msgstr "Gilbratlar"

#: lang.pm:246
#, c-format
msgid "Greenland"
msgstr "Grenland"

#: lang.pm:247
#, c-format
msgid "Gambia"
msgstr "Gambija"

#: lang.pm:248
#, c-format
msgid "Guinea"
msgstr "Gvineja"

#: lang.pm:249
#, c-format
msgid "Guadeloupe"
msgstr "Gvadalupe"

#: lang.pm:250
#, c-format
msgid "Equatorial Guinea"
msgstr "Ekvatorijalna Gvineja"

#: lang.pm:252
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Južna Džordžija i Južna Sendvička Ostrva"

#: lang.pm:253
#, c-format
msgid "Guatemala"
msgstr "Gvatemala"

#: lang.pm:254
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:255
#, c-format
msgid "Guinea-Bissau"
msgstr "Gvineja-Bisao"

#: lang.pm:256
#, c-format
msgid "Guyana"
msgstr "Gvajana"

#: lang.pm:257
#, fuzzy, c-format
msgid "China (Hong Kong)"
msgstr "Hong Kong"

#: lang.pm:258
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Herdova i McDonald Ostrva"

#: lang.pm:259
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: lang.pm:260
#, c-format
msgid "Croatia"
msgstr "Hrvatska"

#: lang.pm:261
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: lang.pm:262 network/adsl_consts.pm:152
#, c-format
msgid "Hungary"
msgstr "Mađarska"

#: lang.pm:263
#, c-format
msgid "Indonesia"
msgstr "Indonezija"

#: lang.pm:264 standalone/drakxtv:45
#, c-format
msgid "Ireland"
msgstr "Irska"

#: lang.pm:265
#, c-format
msgid "Israel"
msgstr "Izrael"

#: lang.pm:266
#, c-format
msgid "India"
msgstr "Indija"

#: lang.pm:267
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Britanska Indijska Okeanska Teritorija"

#: lang.pm:268
#, c-format
msgid "Iraq"
msgstr "Irak"

#: lang.pm:269
#, c-format
msgid "Iran"
msgstr "Iran"

#: lang.pm:270
#, c-format
msgid "Iceland"
msgstr "Island"

#: lang.pm:272
#, c-format
msgid "Jamaica"
msgstr "Jamajka"

#: lang.pm:273
#, c-format
msgid "Jordan"
msgstr "Jordan"

#: lang.pm:274
#, c-format
msgid "Japan"
msgstr "Japan"

#: lang.pm:275
#, c-format
msgid "Kenya"
msgstr "Kenija"

#: lang.pm:276
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgistan"

#: lang.pm:277
#, c-format
msgid "Cambodia"
msgstr "Kambodža"

#: lang.pm:278
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:279
#, c-format
msgid "Comoros"
msgstr "Komori"

#: lang.pm:280
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Sveti Kits i Nevis"

#: lang.pm:281
#, c-format
msgid "Korea (North)"
msgstr "Koreja (Severna)"

#: lang.pm:282
#, c-format
msgid "Korea"
msgstr "Koreja"

#: lang.pm:283
#, c-format
msgid "Kuwait"
msgstr "Kuvajt"

#: lang.pm:284
#, c-format
msgid "Cayman Islands"
msgstr "Kajmanska Ostrva"

#: lang.pm:285
#, c-format
msgid "Kazakhstan"
msgstr "Kazahstan"

#: lang.pm:286
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:287
#, c-format
msgid "Lebanon"
msgstr "Liban"

#: lang.pm:288
#, c-format
msgid "Saint Lucia"
msgstr "Sveta Lucija"

#: lang.pm:289
#, c-format
msgid "Liechtenstein"
msgstr "Lihtenštajn"

#: lang.pm:290
#, c-format
msgid "Sri Lanka"
msgstr "Šri Lanka"

#: lang.pm:291
#, c-format
msgid "Liberia"
msgstr "Liberija"

#: lang.pm:292
#, c-format
msgid "Lesotho"
msgstr "Lesoto"

#: lang.pm:293
#, c-format
msgid "Lithuania"
msgstr "Litvanija"

#: lang.pm:294
#, c-format
msgid "Luxembourg"
msgstr "Luksemburg"

#: lang.pm:295
#, c-format
msgid "Latvia"
msgstr "Letonija"

#: lang.pm:296
#, c-format
msgid "Libya"
msgstr "Libija"

#: lang.pm:297
#, c-format
msgid "Morocco"
msgstr "Maroko"

#: lang.pm:298
#, c-format
msgid "Monaco"
msgstr "Monako"

#: lang.pm:299
#, c-format
msgid "Moldova"
msgstr "Moldavija"

#: lang.pm:300
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: lang.pm:301
#, c-format
msgid "Marshall Islands"
msgstr "Maršalova Ostrva"

#: lang.pm:302
#, c-format
msgid "Macedonia"
msgstr "Makedonija"

#: lang.pm:303
#, c-format
msgid "Mali"
msgstr "Mali"

#: lang.pm:304
#, c-format
msgid "Myanmar"
msgstr "Mianmar (Burma)"

#: lang.pm:305
#, c-format
msgid "Mongolia"
msgstr "Mongolija"

#: lang.pm:306
#, c-format
msgid "Northern Mariana Islands"
msgstr "Severno Marijanska Ostrva"

#: lang.pm:307
#, c-format
msgid "Martinique"
msgstr "Martinik"

#: lang.pm:308
#, c-format
msgid "Mauritania"
msgstr "Mauritanija"

#: lang.pm:309
#, c-format
msgid "Montserrat"
msgstr "Monserat"

#: lang.pm:310
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:311
#, c-format
msgid "Mauritius"
msgstr "Mauricijus"

#: lang.pm:312
#, c-format
msgid "Maldives"
msgstr "Maldivi"

#: lang.pm:313
#, c-format
msgid "Malawi"
msgstr "Malavi"

#: lang.pm:314
#, c-format
msgid "Mexico"
msgstr "Meksiko"

#: lang.pm:315
#, c-format
msgid "Malaysia"
msgstr "Malezija"

#: lang.pm:316
#, c-format
msgid "Mozambique"
msgstr "Mozambik"

#: lang.pm:317
#, c-format
msgid "Namibia"
msgstr "Namibija"

#: lang.pm:318
#, c-format
msgid "New Caledonia"
msgstr "Nova Kaledonija"

#: lang.pm:319
#, c-format
msgid "Niger"
msgstr "Niger"

#: lang.pm:320
#, c-format
msgid "Norfolk Island"
msgstr "Norfolk Ostrva"

#: lang.pm:321
#, c-format
msgid "Nigeria"
msgstr "Nigerija"

#: lang.pm:322
#, c-format
msgid "Nicaragua"
msgstr "Nikaragva"

#: lang.pm:325
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:326
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: lang.pm:327
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:328
#, c-format
msgid "New Zealand"
msgstr "NOvi Zeland"

#: lang.pm:329
#, c-format
msgid "Oman"
msgstr "Oman"

#: lang.pm:330
#, c-format
msgid "Panama"
msgstr "Panama"

#: lang.pm:331
#, c-format
msgid "Peru"
msgstr "Peru"

#: lang.pm:332
#, c-format
msgid "French Polynesia"
msgstr "Fransuska Polinezija"

#: lang.pm:333
#, c-format
msgid "Papua New Guinea"
msgstr "Papua Nova Gvineja"

#: lang.pm:334
#, c-format
msgid "Philippines"
msgstr "Filipini"

#: lang.pm:335
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: lang.pm:336 network/adsl_consts.pm:186
#, c-format
msgid "Poland"
msgstr "Poljska"

#: lang.pm:337
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Sveti Pjer i Mikelon"

#: lang.pm:338
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:339
#, c-format
msgid "Puerto Rico"
msgstr "Porto Riko"

#: lang.pm:340
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: lang.pm:341 network/adsl_consts.pm:196
#, c-format
msgid "Portugal"
msgstr "Portugal"

#: lang.pm:342
#, c-format
msgid "Paraguay"
msgstr "Paragvaj"

#: lang.pm:343
#, c-format
msgid "Palau"
msgstr "Palau"

#: lang.pm:344
#, c-format
msgid "Qatar"
msgstr "Katar"

#: lang.pm:345
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:346
#, c-format
msgid "Romania"
msgstr "Rumunija"

#: lang.pm:347
#, c-format
msgid "Russia"
msgstr "Rusija"

#: lang.pm:348
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: lang.pm:349
#, c-format
msgid "Saudi Arabia"
msgstr "Saudijska Arabija"

#: lang.pm:350
#, c-format
msgid "Solomon Islands"
msgstr "Solomonova Ostrva"

#: lang.pm:351
#, c-format
msgid "Seychelles"
msgstr "Sejšeli"

#: lang.pm:352
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: lang.pm:354
#, c-format
msgid "Singapore"
msgstr "Singapur"

#: lang.pm:355
#, c-format
msgid "Saint Helena"
msgstr "Sveta Jelena"

#: lang.pm:356
#, c-format
msgid "Slovenia"
msgstr "Slovenija"

#: lang.pm:357
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard and Jan Mayen Islands"

#: lang.pm:358
#, c-format
msgid "Slovakia"
msgstr "Slavačka"

#: lang.pm:359
#, c-format
msgid "Sierra Leone"
msgstr "Sijera Leone"

#: lang.pm:360
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: lang.pm:361
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: lang.pm:362
#, c-format
msgid "Somalia"
msgstr "Somalija"

#: lang.pm:363
#, c-format
msgid "Suriname"
msgstr "Surinam"

#: lang.pm:364
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome i Principe"

#: lang.pm:365
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: lang.pm:366
#, c-format
msgid "Syria"
msgstr "Sirija"

#: lang.pm:367
#, c-format
msgid "Swaziland"
msgstr "Svazilend"

#: lang.pm:368
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks and Caicos Islands"

#: lang.pm:369
#, c-format
msgid "Chad"
msgstr "Čad"

#: lang.pm:370
#, c-format
msgid "French Southern Territories"
msgstr "Francuske Južne Teritorije"

#: lang.pm:371
#, c-format
msgid "Togo"
msgstr "Togo"

#: lang.pm:372
#, c-format
msgid "Thailand"
msgstr "Tajland"

#: lang.pm:373
#, c-format
msgid "Tajikistan"
msgstr "Tadžikistan"

#: lang.pm:374
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:375
#, c-format
msgid "East Timor"
msgstr "Istočni Timor"

#: lang.pm:376
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: lang.pm:377
#, c-format
msgid "Tunisia"
msgstr "Tunis"

#: lang.pm:378
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:379
#, c-format
msgid "Turkey"
msgstr "Turska"

#: lang.pm:380
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad i Tobago"

#: lang.pm:381
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: lang.pm:382
#, c-format
msgid "Taiwan"
msgstr "Tajvan"

#: lang.pm:383
#, c-format
msgid "Tanzania"
msgstr "Tanzanija"

#: lang.pm:384
#, c-format
msgid "Ukraine"
msgstr "Ukrajina"

#: lang.pm:385
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: lang.pm:386
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "United States Minor Outlying Islands"

#: lang.pm:388
#, c-format
msgid "Uruguay"
msgstr "Urugvaj"

#: lang.pm:389
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: lang.pm:390
#, c-format
msgid "Vatican"
msgstr "Vatikan"

#: lang.pm:391
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Sveti Vinsent i Grenandini"

#: lang.pm:392
#, c-format
msgid "Venezuela"
msgstr "Venecuela"

#: lang.pm:393
#, c-format
msgid "Virgin Islands (British)"
msgstr "Devičanska Ostrva(V.Britanija)"

#: lang.pm:394
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Devičanska Ostrva (S.A.D)"

#: lang.pm:395
#, c-format
msgid "Vietnam"
msgstr "Vijetnam"

#: lang.pm:396
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: lang.pm:397
#, c-format
msgid "Wallis and Futuna"
msgstr "Valis i Futuna"

#: lang.pm:398
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: lang.pm:399
#, c-format
msgid "Yemen"
msgstr "Jemen"

#: lang.pm:400
#, c-format
msgid "Mayotte"
msgstr "Majot"

#: lang.pm:401
#, c-format
msgid "Serbia & Montenegro"
msgstr ""

#: lang.pm:402 standalone/drakxtv:47
#, c-format
msgid "South Africa"
msgstr "Južna Afrika"

#: lang.pm:403
#, c-format
msgid "Zambia"
msgstr "Zambija"

#: lang.pm:404
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabve"

#: lang.pm:985
#, c-format
msgid "Welcome to %s"
msgstr "Dobrošli u  %s"

#: loopback.pm:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Kružno montiranje  %s\n"

#: lvm.pm:115
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Ukloni prvo logičke volumene\n"

#: modules/interactive.pm:21 standalone/drakconnect:969
#, c-format
msgid "Parameters"
msgstr "Parametri"

#: modules/interactive.pm:21 standalone/draksec:44
#, c-format
msgid "NONE"
msgstr ""

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "Ručna konfiguracija"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Ovde možete podesiti svaki parametar modula."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s %s interfaces"
msgstr "Pronađeno  %s %s interfejsa"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Da li imate još jedan?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Imate li još %s interfejsa?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Pogledaj informacije o hardveru"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:87
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instaliram drajver za %s karticu %s"

#: modules/interactive.pm:87
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: modules/interactive.pm:98
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Sada možete da ubacite njegove opcije u modul %s.\n"
"Zapamtite da svaka adresa treba da se unosi sa prefiksom 0x kao npr. '0x123'"

#: modules/interactive.pm:104
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Možete navesti njegove opcije za modul %s.\n"
"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
"Na primer, ``io=0x300 irq=7''"

#: modules/interactive.pm:106
#, c-format
msgid "Module options:"
msgstr "Opcije modula:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:118
#, c-format
msgid "Which %s driver should I try?"
msgstr "Koji %s drajver da probam?"

#: modules/interactive.pm:127
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"U nekim slučajevima, drajver %s zahteva dodatne informacije\n"
"za pravilan rad, mada može lepo da radi i bez njih. Da li hoćete\n"
"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
"Moguće je da će proba zaglaviti vaš računar, ali neće naneti nikakvu štetu."

#: modules/interactive.pm:131
#, c-format
msgid "Autoprobe"
msgstr "Automatska proba"

#: modules/interactive.pm:131
#, c-format
msgid "Specify options"
msgstr "Navedite opcije"

#: modules/interactive.pm:143
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Podizanje modula %s neuspelo.\n"
"Da li želite pokušate ponovo sa drugim parametrima ?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "broj"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d odvojeni brojevi sa zarezom"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d odovojeni stringovi sa zarezom"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "odvojeni brojevi sa zarezom"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "odvojeni stringovi sa zarezom"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun Miš"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standardni"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Generički PS2 miš sa točkićem"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/modem.pm:58 network/modem.pm:72 network/modem.pm:77
#: network/modem.pm:108 network/netconnect.pm:587 network/netconnect.pm:592
#: network/netconnect.pm:604 network/netconnect.pm:609
#: network/netconnect.pm:625 network/netconnect.pm:627
#, fuzzy, c-format
msgid "Automatic"
msgstr "Automatski IP"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 taster"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Generički 2 tastera miš"

#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Generički 3 tastera miš"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Točkić"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "serijski"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Generički 3 tastera miš"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC serija (serijski)"

#: mouse.pm:66
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC serija (serijski)"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM serija"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech mouse (serijski, stari C7 tip)"

#: mouse.pm:72
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech mouse (serijski, stari C7 tip)"

#: mouse.pm:74
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "bus miš"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 tastera"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 tastera"

#: mouse.pm:82
#, fuzzy, c-format
msgid "3 buttons with Wheel emulation"
msgstr "Emulacija tastera"

#: mouse.pm:86
#, fuzzy, c-format
msgid "Universal"
msgstr "Post-deinstalacija"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:92 standalone/drakvpn:1140
#, c-format
msgid "none"
msgstr "nijedan"

#: mouse.pm:94
#, c-format
msgid "No mouse"
msgstr "Nema miša"

#: mouse.pm:515
#, c-format
msgid "Please test the mouse"
msgstr "Molim Vas da testirate miša"

#: mouse.pm:517
#, c-format
msgid "To activate the mouse,"
msgstr "Da bi mogli da aktivirate miša"

#: mouse.pm:518
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "pomerite točkić !"

#: network/adsl.pm:19
#, c-format
msgid "use pppoe"
msgstr "koristi pppoe"

#: network/adsl.pm:20
#, c-format
msgid "use pptp"
msgstr "koristi pptp"

#: network/adsl.pm:21
#, c-format
msgid "use dhcp"
msgstr "koristi dhcpd"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
msgid " - detected"
msgstr "detektovano"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (koristi pppoa) usb"

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr "Sagem (koristi dhcp) usb"

#: network/adsl.pm:35 network/netconnect.pm:769
#, c-format
msgid "Connect to the Internet"
msgstr "Konektuj na internet"

#: network/adsl.pm:36 network/netconnect.pm:770
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Najčešći način za konekciju sa adsl je pppoe.\n"
"Međutim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"

#: network/adsl.pm:41 network/netconnect.pm:774
#, fuzzy, c-format
msgid "ADSL connection type :"
msgstr "ADSL konekcija"

#: network/drakfirewall.pm:12
#, c-format
msgid "Web Server"
msgstr "Veb Server"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Domain Name Server"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "SSH Server"

#: network/drakfirewall.pm:27
#, fuzzy, c-format
msgid "FTP server"
msgstr "NTP Server"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Server za el.poštu"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP i IMAP Server"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X server"

#: network/drakfirewall.pm:48
#, fuzzy, c-format
msgid "Samba server"
msgstr "Samba Server"

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "DNS server"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:125
#, c-format
msgid "No network card"
msgstr "Nije pronađena mrežna kartica"

#: network/drakfirewall.pm:146
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall konfigurator\n"
"\n"
"On konfiguriše lični firewall za ovu Mandrakelinux mašinu.\n"
"Za moćno firewall rešenje, pogledajte\n"
"specijalizovanu MandrakeSecurity Firewall distribuciju."

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall konfiguracija\n"
"\n"
"Proerite da li ste podesili vaš Mrežni/Internet pristup sa \n"
"drakconnect pre nego što nastavite."

#: network/drakfirewall.pm:169
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Koji servise želite da budu dostupni preko Inerneta?"

#: network/drakfirewall.pm:170
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Možete uneti različite portove. \n"
"Ispravni primeri su: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Pogledajte /etc/services za informaciju."

#: network/drakfirewall.pm:176
#, fuzzy, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Dat je pogrešan port: %s.\n"
"Pravilan format je \"port/tcp\" ili \"port/udp\", \n"
"gde je port između 1 i 65535."

#: network/drakfirewall.pm:186
#, c-format
msgid "Everything (no firewall)"
msgstr "Sve (bez firewall-a)"

#: network/drakfirewall.pm:188
#, c-format
msgid "Other ports"
msgstr "Ostali portovi"

#: network/isdn.pm:115 network/netconnect.pm:437
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:157 network/netconnect.pm:389
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:157 network/netconnect.pm:389
#, c-format
msgid "I don't know"
msgstr "Ne znam"

#: network/isdn.pm:158 network/netconnect.pm:389
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:159 network/netconnect.pm:389
#, fuzzy, c-format
msgid "USB"
msgstr "LSB"

#: network/modem.pm:42 network/modem.pm:43 network/modem.pm:44
#: network/netconnect.pm:592 network/netconnect.pm:609
#: network/netconnect.pm:625
#, fuzzy, c-format
msgid "Manual"
msgstr "upustvo"

#: network/netconnect.pm:88 network/netconnect.pm:466
#: network/netconnect.pm:476 network/netconnect.pm:837
#: network/netconnect.pm:842
#, fuzzy, c-format
msgid "Manual choice"
msgstr "upustvo"

#: network/netconnect.pm:88
#, c-format
msgid "Internal ISDN card"
msgstr "Interna  ISDN kartica"

#: network/netconnect.pm:97
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:98
#, fuzzy, c-format
msgid "Managed"
msgstr "Izaberite jezik"

#: network/netconnect.pm:99
#, fuzzy, c-format
msgid "Master"
msgstr "Majot"

#: network/netconnect.pm:100
#, fuzzy, c-format
msgid "Repeater"
msgstr "Obnovi"

#: network/netconnect.pm:101
#, fuzzy, c-format
msgid "Secondary"
msgstr "sekundarno"

#: network/netconnect.pm:102
#, fuzzy, c-format
msgid "Auto"
msgstr "O"

#: network/netconnect.pm:105 printer/printerdrake.pm:1133
#: standalone/drakups:64
#, c-format
msgid "Manual configuration"
msgstr "Ručna konfiguracija"

#: network/netconnect.pm:106
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "Automatski IP"

#: network/netconnect.pm:108
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:111
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protokol za statak sveta"

#: network/netconnect.pm:113 standalone/drakconnect:528
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Evropski protokol (EDSS1)"

#: network/netconnect.pm:114 standalone/drakconnect:529
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol za Ostatak sveta \n"
" bez D-kanala (zakupljene linije)"

#: network/netconnect.pm:146
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch usb"

#: network/netconnect.pm:147
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "Sistemski mod"

#: network/netconnect.pm:148
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:149
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:153
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:154
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "Ručna konfiguracija"

#: network/netconnect.pm:155
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:156
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:157
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:161
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Mrežna kartica"

#: network/netconnect.pm:162
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Mrežna kartica"

#: network/netconnect.pm:163
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:164
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:165
#, c-format
msgid "PPPOA LLC"
msgstr ""

#: network/netconnect.pm:166
#, c-format
msgid "PPPOA VC"
msgstr ""

#: network/netconnect.pm:170 standalone/drakconnect:466
#, c-format
msgid "Script-based"
msgstr "Bazirano na skripti"

#: network/netconnect.pm:171 standalone/drakconnect:466
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:172 standalone/drakconnect:466
#, c-format
msgid "Terminal-based"
msgstr "Bazirano na terminalu"

#: network/netconnect.pm:173 standalone/drakconnect:466
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:174 standalone/drakconnect:466
#, fuzzy, c-format
msgid "PAP/CHAP"
msgstr "CHAP"

#: network/netconnect.pm:228 standalone/drakconnect:55
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "Podešavanje mreže"

#: network/netconnect.pm:234
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "Detektovano na portu %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:236
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "detektovano %s"

#: network/netconnect.pm:236
#, fuzzy, c-format
msgid "(detected)"
msgstr "detektovano"

#: network/netconnect.pm:238
#, fuzzy, c-format
msgid "Modem connection"
msgstr "Winmodem konekcija"

#: network/netconnect.pm:239
#, c-format
msgid "ISDN connection"
msgstr "ISDN konekcija"

#: network/netconnect.pm:240
#, c-format
msgid "ADSL connection"
msgstr "ADSL konekcija"

#: network/netconnect.pm:241
#, c-format
msgid "Cable connection"
msgstr "Kablovska konekcija"

#: network/netconnect.pm:242
#, c-format
msgid "LAN connection"
msgstr "LAN konekcija"

#: network/netconnect.pm:243 network/netconnect.pm:257
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "Kablovska konekcija"

#: network/netconnect.pm:253
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Izaberite tip konekcije koji želite da koristite"

#: network/netconnect.pm:270
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"\n"
"\n"
"Sada treba da podesimo %s konekciju.\n"
"\n"
"\n"
"Pritisnite \"U redu\" za nastavak."

#: network/netconnect.pm:278 network/netconnect.pm:796
#, c-format
msgid "Connection Configuration"
msgstr "Konfiguracija Internet konekcije"

#: network/netconnect.pm:279 network/netconnect.pm:797
#, c-format
msgid "Please fill or check the field below"
msgstr "Molim VAS da popunite ili označite polja ispod"

#: network/netconnect.pm:286 standalone/drakconnect:519
#, c-format
msgid "Card IRQ"
msgstr "IRQ kartice"

#: network/netconnect.pm:287 standalone/drakconnect:520
#, c-format
msgid "Card mem (DMA)"
msgstr "(DMA) kartice"

#: network/netconnect.pm:288 standalone/drakconnect:521
#, c-format
msgid "Card IO"
msgstr " IO kartice"

#: network/netconnect.pm:289 standalone/drakconnect:522
#, c-format
msgid "Card IO_0"
msgstr " IO_0 kartice"

#: network/netconnect.pm:290
#, c-format
msgid "Card IO_1"
msgstr "IO_1 kartice"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "Vaš lični broj telefona"

#: network/netconnect.pm:292 network/netconnect.pm:800
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Ime provajdera (npr. provider.net)"

#: network/netconnect.pm:293 standalone/drakconnect:463
#, c-format
msgid "Provider phone number"
msgstr "Broj telefona provajdera"

#: network/netconnect.pm:294
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "Provajderov dns 1 (opciono)"

#: network/netconnect.pm:295
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "Provajderov dns 2 (opciono)"

#: network/netconnect.pm:296 standalone/drakconnect:419
#, c-format
msgid "Dialing mode"
msgstr "Mod za biranje"

#: network/netconnect.pm:297 standalone/drakconnect:424
#: standalone/drakconnect:484
#, c-format
msgid "Connection speed"
msgstr "Brzina konekcije "

#: network/netconnect.pm:298 standalone/drakconnect:429
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Vreme pauze konekcije (u sek.)"

#: network/netconnect.pm:301 network/netconnect.pm:803
#: standalone/drakconnect:461
#, c-format
msgid "Account Login (user name)"
msgstr "Logovanje za račun (korisničko ime)"

#: network/netconnect.pm:302 network/netconnect.pm:804
#: standalone/drakconnect:462
#, c-format
msgid "Account Password"
msgstr "Lozinka za račun"

#: network/netconnect.pm:332 network/netconnect.pm:650
#: network/netconnect.pm:835
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "Izaberite mrežni interfejs"

#: network/netconnect.pm:334 network/netconnect.pm:379
#: network/netconnect.pm:651 network/netconnect.pm:837 network/shorewall.pm:84
#: standalone/drakconnect:643 standalone/drakgw:225 standalone/drakvpn:221
#, fuzzy, c-format
msgid "Net Device"
msgstr "Xinetd Servis"

#: network/netconnect.pm:335 network/netconnect.pm:347
#, c-format
msgid "External ISDN modem"
msgstr "Eksterni ISDN modem"

#: network/netconnect.pm:338 network/netconnect.pm:470
#: network/netconnect.pm:655 standalone/drakgw:113 standalone/drakvpn:51
#, fuzzy, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "Žalim, ali podržani su samo 2.4 kerneli."

#: network/netconnect.pm:378 standalone/harddrake2:115
#, c-format
msgid "Select a device !"
msgstr "Izaberite uređaj !"

#: network/netconnect.pm:387 network/netconnect.pm:397
#: network/netconnect.pm:407 network/netconnect.pm:423
#: network/netconnect.pm:434
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN Konfiguracija"

#: network/netconnect.pm:388
#, c-format
msgid "What kind of card do you have?"
msgstr "Kakvu vrstu kartice imate?"

#: network/netconnect.pm:398
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Ukoliko imate ISA karticu, vrednosti na sledećem ekranu bi trebale biti "
"ispravne.\n"
"\n"
"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za vašu karticu.\n"

#: network/netconnect.pm:402
#, c-format
msgid "Continue"
msgstr "Nastavi"

#: network/netconnect.pm:402
#, c-format
msgid "Abort"
msgstr "Prekini"

#: network/netconnect.pm:408
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Koja je od ponuđenih vaša ISDN kartica ?"

#: network/netconnect.pm:423
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Koji protokol želite da koristite ?"

#: network/netconnect.pm:425 standalone/drakconnect:116
#: standalone/drakconnect:527 standalone/drakvpn:1142
#, c-format
msgid "Protocol"
msgstr "Protokol"

#: network/netconnect.pm:434
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Izaberite svog provajdera.\n"
" Ukoliko nije na listi, izaberite Unlisted"

#: network/netconnect.pm:436 network/netconnect.pm:542
#: network/netconnect.pm:690
#, fuzzy, c-format
msgid "Provider:"
msgstr "Profil: "

#: network/netconnect.pm:451
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Sistem ne podržava vaš modem.\n"
"Drajver potražite na http://www.linmodems.org"

#: network/netconnect.pm:463
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "Izaberite mrežni interfejs"

#: network/netconnect.pm:511
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Izaberite serijski port  na koji je modem povezan."

#: network/netconnect.pm:540
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "Izaberite Spooler za štampač"

#: network/netconnect.pm:569
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Dialup opcije"

#: network/netconnect.pm:572
#, c-format
msgid "Connection name"
msgstr "Ime konekcije"

#: network/netconnect.pm:573
#, c-format
msgid "Phone number"
msgstr "Broj telefona"

#: network/netconnect.pm:574
#, c-format
msgid "Login ID"
msgstr "ID za logovanje"

#: network/netconnect.pm:589 network/netconnect.pm:622
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Parametri"

#: network/netconnect.pm:592
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Parametri"

#: network/netconnect.pm:593 network/netconnect.pm:927
#: printer/printerdrake.pm:431 standalone/drakconnect:116
#: standalone/drakconnect:325 standalone/drakconnect:816
#: standalone/drakups:266
#, c-format
msgid "IP address"
msgstr "IP adresa"

#: network/netconnect.pm:594
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "Subnet maska:"

#: network/netconnect.pm:606
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:609
#, fuzzy, c-format
msgid "DNS"
msgstr "NIS"

#: network/netconnect.pm:610
#, c-format
msgid "Domain name"
msgstr "Ime domena"

#: network/netconnect.pm:611 network/netconnect.pm:801
#: standalone/drakconnect:934
#, c-format
msgid "First DNS Server (optional)"
msgstr "Prvi DNS Server (opcija)"

#: network/netconnect.pm:612 network/netconnect.pm:802
#: standalone/drakconnect:935
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Drugi DNS Server (opcija)"

#: network/netconnect.pm:613
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "Ime hosta ili IP za štampač"

#: network/netconnect.pm:625 standalone/drakconnect:336
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: network/netconnect.pm:626
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "IP adresa"

#: network/netconnect.pm:650
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "LAN konfiguracija"

#: network/netconnect.pm:688
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "Izaberite svoju zemlju."

#: network/netconnect.pm:706
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/netconnect.pm:710 network/netconnect.pm:715
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "Snimi na disketu"

#: network/netconnect.pm:710 network/netconnect.pm:719
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "Proračunavam granice Windows fajl-sistema"

#: network/netconnect.pm:710 network/netconnect.pm:723
#, c-format
msgid "Do it later"
msgstr ""

#: network/netconnect.pm:730
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/netconnect.pm:737
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/netconnect.pm:752
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Vama je potreban alcatel mikro mod.\n"
"MOžete ga Download-ovati sa\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"

#: network/netconnect.pm:805
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:806
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:808
#, fuzzy, c-format
msgid "Encapsulation :"
msgstr "Ključ za enkripciju"

#: network/netconnect.pm:825
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:852
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"Upozorenje: Ovaj uređaj je već prethodno konfigurisan za konektovanje na "
"Internet.\n"
"Samo prihvaitite da bi postavku ostavili istom.\n"
"Izmena polja koje vidite će poništiti postojeću konfiguraciju."

#: network/netconnect.pm:865 network/netconnect.pm:1231
#, fuzzy, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"čestitamo, mrežna i internet konfiguracija je završena.\n"
"\n"
"Konfiguracija se sada može primeniti na sistem.\n"

#: network/netconnect.pm:879
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "Zeroconf ime domaćina (Host name)"

#: network/netconnect.pm:880 network/netconnect.pm:914
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Podešavanje mrežnog uređaja %s"

#: network/netconnect.pm:881
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""

#: network/netconnect.pm:915
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Molim unesite IP konfiguraciju za ovu mašinu.\n"
"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
"IP adresa (na primer, 123.45.67.89)."

#: network/netconnect.pm:922
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Dodelite ime hosta za DHCP adresu"

#: network/netconnect.pm:923
#, c-format
msgid "DHCP host name"
msgstr "DHCP ime hosta"

#: network/netconnect.pm:928 standalone/drakconnect:330
#: standalone/drakconnect:817 standalone/drakgw:321
#, c-format
msgid "Netmask"
msgstr "Mrežna maska"

#: network/netconnect.pm:930 standalone/drakconnect:412
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Track mrežna kartica id (korisno za laptop računare)"

#: network/netconnect.pm:931 standalone/drakconnect:413
#, c-format
msgid "Network Hotplugging"
msgstr "Direktno priključivanje na mrežu"

#: network/netconnect.pm:932 standalone/drakconnect:407
#, c-format
msgid "Start at boot"
msgstr "Pokreni pri startanju"

#: network/netconnect.pm:934 standalone/drakconnect:820
#, c-format
msgid "DHCP client"
msgstr "DHCP klijent"

#: network/netconnect.pm:944 printer/printerdrake.pm:1383
#: standalone/drakconnect:608
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresa treba da bude u formatu 1.2.3.4"

#: network/netconnect.pm:947
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr ""

#: network/netconnect.pm:977 network/netconnect.pm:1006
#, fuzzy, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Molim Vas unesete ime hosta ili IP."

#: network/netconnect.pm:980 standalone/drakconnect:378
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "Ekspert mod"

#: network/netconnect.pm:982 standalone/drakconnect:379
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:983 standalone/drakconnect:380
#, fuzzy, c-format
msgid "Network ID"
msgstr "Mreža"

#: network/netconnect.pm:984 standalone/drakconnect:381
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:985 standalone/drakconnect:382
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:986 standalone/drakconnect:383
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:992
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Frekvencija treba da ima predznak k, M ili G (na primer, \"2.46G\" za 2.46 "
"GHz frekvenciju), ili dodajte dovoljno '0'(nula)."

#: network/netconnect.pm:996
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Raspon treba da ima predznak k, M ili G (na primer, \"11M\" za 11M), ili "
"dodajte dovoljno '0' (nula)."

#: network/netconnect.pm:1009 standalone/drakconnect:394
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1010
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1017 standalone/drakconnect:395
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Stanica za igru"

#: network/netconnect.pm:1018 standalone/drakconnect:396
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1019
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwpconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1026 standalone/drakconnect:397
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1027
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1035 standalone/drakconnect:398
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1036
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1063
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Nije detektovana nijedna mrežna kartica.\n"
"Ne mogu da podesim ovaj tip konekcije."

#: network/netconnect.pm:1067 standalone/drakgw:261 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "Izaberite mrežni interfejs"

#: network/netconnect.pm:1068
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
"Izaberite mrežni adapter koji želite da koristite za konekciju na internet"

#: network/netconnect.pm:1089
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Molim unesite ime vašeg domena, ime hosta, kao IP adrese dodatnih\n"
"'nameserver'-a. Ime vašeg hosta treba da bude puno kvalifikovano ime hosta,\n"
"kao na pr.  ``mybox.mylab.myco.com''.\n"
"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."

#: network/netconnect.pm:1093
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1095 standalone/drakconnect:933
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "Konfiguracija sistema"

#: network/netconnect.pm:1095
#, c-format
msgid "Host name"
msgstr "Ime hosta:"

#: network/netconnect.pm:1097
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "DNS server"

#: network/netconnect.pm:1098
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "DNS server"

#: network/netconnect.pm:1099
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "DNS server"

#: network/netconnect.pm:1100
#, fuzzy, c-format
msgid "Search domain"
msgstr "NIS Domen"

#: network/netconnect.pm:1101
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1102
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (e.g. %s)"

#: network/netconnect.pm:1104
#, c-format
msgid "Gateway device"
msgstr "Gateway uređaj"

#: network/netconnect.pm:1113
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "DNS adresa treba da bude u formatu 1.2.3.4"

#: network/netconnect.pm:1118 standalone/drakconnect:611
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Gateway adresa treba da bude u formatu 1.2.3.4"

#: network/netconnect.pm:1129
#, c-format
msgid ""
"Enter a Zeroconf host name which will be the one that your machine will get "
"back to other machines on the network:"
msgstr ""

#: network/netconnect.pm:1130
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf ime domaćina (Host name)"

#: network/netconnect.pm:1133
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zeroconf ime domaćina (host name) ne sme da sadrži a."

#: network/netconnect.pm:1143
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Vi ste podesili više načina za konektovanje na Internet.\n"
"Izaberite jedan od njih koji želite da koristite.\n"
"\n"

#: network/netconnect.pm:1145
#, c-format
msgid "Internet connection"
msgstr "Internet konekcija"

#: network/netconnect.pm:1153
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "Koju XFree konfiguraciju želite da imate ?"

#: network/netconnect.pm:1163
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Da li želite da startujete konektovanje pri startanju sistema ?"

#: network/netconnect.pm:1175
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Mreža mora da se restartuje. Da li želite da je restartujete ?"

#: network/netconnect.pm:1182 network/netconnect.pm:1247
#, c-format
msgid "Network Configuration"
msgstr "Podešavanje mreže"

#: network/netconnect.pm:1183
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Pojavio se problem tokom restartovanja mreže?\n"
"%s"

#: network/netconnect.pm:1191
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Da li hoćete da se konektujete na internet sada?"

#: network/netconnect.pm:1199 standalone/drakconnect:965
#, c-format
msgid "Testing your connection..."
msgstr "Testiranje konekcije..."

#: network/netconnect.pm:1215
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Sistem je trenutno konektovan na Internet."

#: network/netconnect.pm:1216
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Iz sigurnosnih razloga, on će sada biti diskonektovan."

#: network/netconnect.pm:1217
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Izgleda da sistem nije konektovan na Internet.\n"
"Probajte da promenite konfiguraciju."

#: network/netconnect.pm:1234
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Kada se to uradi, trebali bi da restartujete X\n"
"okruženje da bi izbegli probleme sa promenom hostname-a."

#: network/netconnect.pm:1235
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Pojavili su se problemi tokom konfiguracije.\n"
"Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko vaša konekcija "
"ne radi, treba da ponovite konfiguraciju"

#: network/netconnect.pm:1248
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Zbog toga što radite mrežnu instalaciju, vaša mreža je već podešena "
"podešena.\n"
"Kliknite na  OK  zadrdžali konfiguraciju Network/Internet konekcije, ili "
"cancel da bi ponovo uradili kofiguraciju.\n"

#: network/netconnect.pm:1336
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:315
#, c-format
msgid "Proxies configuration"
msgstr "Podešavanje proksija"

#: network/network.pm:316
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:317
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:320
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy treba da bude http://..."

#: network/network.pm:321
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Url treba da počinje 'ftp:' ili 'http:'"

#: network/shorewall.pm:28
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Detektovana Firewalling konfiguracija"

#: network/shorewall.pm:29
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Upozorenje ! Postojeća firewalling konfiguracija je detektovana. Moždaće "
"biti potrebno ručno podešavanje nakon instalacije."

#: network/shorewall.pm:77 standalone/drakgw:218 standalone/drakvpn:214
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/tools.pm:205
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "Ubacite disketu u uređaj %s"

#: network/tools.pm:206
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "Ubacite FAT formatiranu praznu disketu u uređaj %s"

#: network/tools.pm:207
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Gde biste da montirate %s uređaj ?"

#: partition_table.pm:644
#, c-format
msgid "mount failed: "
msgstr "montiranje nije uspelo: "

#: partition_table.pm:749
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Extended particija nije podržana na ovoj platformi"

#: partition_table.pm:767
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Imate prazninu u vašoj tabeli particija ali je ne mogu korisiti.\n"
"Jedino rešenje je da pomerite primarnu particiju tako da praznina bude\n"
"do extended particija"

#: partition_table.pm:854
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Otvaranje iz datoteke %s nije uspelo: %s"

#: partition_table.pm:856
#, c-format
msgid "Bad backup file"
msgstr "Loše backup-ovana datoteka"

#: partition_table.pm:876
#, c-format
msgid "Error writing to file %s"
msgstr "Greška kod unosa u datoteka %s"

#: partition_table/raw.pm:187
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Nešto loše se dešava sa vašim hard diskom. \n"
"Test integriteta podataka nije prošao. \n"
"To znači da sve što se nalazi na disku će završiti kao đubre"

#: pkgs.pm:24
#, c-format
msgid "must have"
msgstr "mora imati"

#: pkgs.pm:25
#, c-format
msgid "important"
msgstr "važno"

#: pkgs.pm:26
#, c-format
msgid "very nice"
msgstr "veoma lepo"

#: pkgs.pm:27
#, c-format
msgid "nice"
msgstr "lepo"

#: pkgs.pm:28
#, c-format
msgid "maybe"
msgstr "možda"

#: printer/cups.pm:103
#, c-format
msgid "(on %s)"
msgstr "(na %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr "(na ovoj mašini)"

#: printer/cups.pm:115 standalone/printerdrake:197
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "Podesi servise"

#: printer/cups.pm:117
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Na CUPS server \"%s\""

#: printer/cups.pm:117 printer/printerdrake.pm:3989
#: printer/printerdrake.pm:3998 printer/printerdrake.pm:4139
#: printer/printerdrake.pm:4150 printer/printerdrake.pm:4362
#, c-format
msgid " (Default)"
msgstr " (Podrazumevano)"

#: printer/data.pm:22
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Štampaj, nemoj da pamtiš"

#: printer/data.pm:23
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:34
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Demon"

#: printer/data.pm:35
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:56
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR Nove Generacije"

#: printer/data.pm:57
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:82
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Opšti Unix-ov sistem za štampanje"

#: printer/detect.pm:148 printer/detect.pm:226 printer/detect.pm:428
#: printer/detect.pm:465 printer/printerdrake.pm:686
#, c-format
msgid "Unknown Model"
msgstr "Nepoznati Model"

#: printer/main.pm:28
#, c-format
msgid "Local printer"
msgstr "Lokalni  štampač"

#: printer/main.pm:29
#, c-format
msgid "Remote printer"
msgstr "Udaljeni štampač"

#: printer/main.pm:30
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Štampač ili Udaljeni CUPS server"

#: printer/main.pm:31 printer/printerdrake.pm:1406
#, c-format
msgid "Printer on remote lpd server"
msgstr "Štampač ili Udaljeni lpd server"

#: printer/main.pm:32
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Mrežni štampač (TCP/Socket)"

#: printer/main.pm:33
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Štampač na SMB/Windows 95/98/NT serveru"

#: printer/main.pm:34
#, c-format
msgid "Printer on NetWare server"
msgstr "Štampač na NetWare serveru"

#: printer/main.pm:35 printer/printerdrake.pm:1410
#, c-format
msgid "Enter a printer device URI"
msgstr "Unesite URI za štampač"

#: printer/main.pm:36
#, c-format
msgid "Pipe job into a command"
msgstr "Ubaci naredbu u komandu"

#: printer/main.pm:306 printer/main.pm:574 printer/main.pm:1544
#: printer/main.pm:2228 printer/main.pm:2239 printer/printerdrake.pm:1866
#: printer/printerdrake.pm:4396
#, c-format
msgid "Unknown model"
msgstr "Nepoznati model"

#: printer/main.pm:331 standalone/printerdrake:196
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "(na ovoj mašini)"

#: printer/main.pm:337 printer/printerdrake.pm:963
#, c-format
msgid " on parallel port #%s"
msgstr " na parelelnom portu #%s"

#: printer/main.pm:340 printer/printerdrake.pm:965
#, c-format
msgid ", USB printer #%s"
msgstr ", USB štampač #%s"

#: printer/main.pm:342
#, c-format
msgid ", USB printer"
msgstr ", USB štampač"

#: printer/main.pm:347
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s"

#: printer/main.pm:350
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s"

#: printer/main.pm:352
#, c-format
msgid ", multi-function device on USB"
msgstr ", multi-funkcionalni uređaj na USB"

#: printer/main.pm:354
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", multi-fuunkcionalni uređaj na HP JetDirect"

#: printer/main.pm:356
#, c-format
msgid ", multi-function device"
msgstr ", multi-funkcionalni uređaj"

#: printer/main.pm:359
#, c-format
msgid ", printing to %s"
msgstr ", štampaj na %s"

#: printer/main.pm:361
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", štampač \"%s\""

#: printer/main.pm:363
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: printer/main.pm:367
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "na Windows serveru \"%s\", deljeni \"%s\""

#: printer/main.pm:371
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "na Novell serveru \"%s\", štampač \"%s\""

#: printer/main.pm:373
#, c-format
msgid ", using command %s"
msgstr ", koristim komandu %s"

#: printer/main.pm:388
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr " na parelelnom portu #%s"

#: printer/main.pm:391 printer/printerdrake.pm:979
#: printer/printerdrake.pm:1002 printer/printerdrake.pm:1020
#, c-format
msgid "USB printer #%s"
msgstr "USB štampač #%s"

#: printer/main.pm:393
#, fuzzy, c-format
msgid "USB printer"
msgstr ", USB štampač"

#: printer/main.pm:398
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s"

#: printer/main.pm:401
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr ", multi-funkcionalni uređaj na paralelnom portu #%s"

#: printer/main.pm:403
#, fuzzy, c-format
msgid "Multi-function device on USB"
msgstr ", multi-funkcionalni uređaj na USB"

#: printer/main.pm:405
#, fuzzy, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ", multi-fuunkcionalni uređaj na HP JetDirect"

#: printer/main.pm:407
#, fuzzy, c-format
msgid "Multi-function device"
msgstr ", multi-funkcionalni uređaj"

#: printer/main.pm:410
#, fuzzy, c-format
msgid "Prints into %s"
msgstr ", štampaj na %s"

#: printer/main.pm:412
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", štampač \"%s\""

#: printer/main.pm:414
#, fuzzy, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: printer/main.pm:418
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "na Windows serveru \"%s\", deljeni \"%s\""

#: printer/main.pm:422
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "na Novell serveru \"%s\", štampač \"%s\""

#: printer/main.pm:424
#, fuzzy, c-format
msgid "Uses command %s"
msgstr ", koristim komandu %s"

#: printer/main.pm:426
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:571 printer/printerdrake.pm:732
#: printer/printerdrake.pm:2463
#, c-format
msgid "Raw printer (No driver)"
msgstr "Raw štampač (bez drajvera)"

#: printer/main.pm:1085 printer/printerdrake.pm:179
#: printer/printerdrake.pm:191
#, c-format
msgid "Local network(s)"
msgstr "Lokalna(e) mreža(e)"

#: printer/main.pm:1087 printer/printerdrake.pm:195
#, c-format
msgid "Interface \"%s\""
msgstr "Interfejs \"%s\""

#: printer/main.pm:1089
#, c-format
msgid "Network %s"
msgstr "Mreža %s"

#: printer/main.pm:1091
#, c-format
msgid "Host %s"
msgstr "Host %s"

#: printer/main.pm:1120
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: printer/printerdrake.pm:22
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:62
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "CUPSkonfiguracija za deljenje štampača"

#: printer/printerdrake.pm:63
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Ovde možete izabrati da li želite da štampači na ovoj mašini treba da budu "
"dostupni na drugim udaljenim mašinama i na kojim udaljenim mašinama."

#: printer/printerdrake.pm:64
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Takođe možete odlučiti da li želite da štampači na udaljenim mašinama budu "
"automatski dostupni na ovoj mašini."

#: printer/printerdrake.pm:67
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Štampači na ovoj mašini su dostupni za ostale računare"

#: printer/printerdrake.pm:69
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Automatski pronađi dostupne štampače na udaljenim mašinama"

#: printer/printerdrake.pm:71
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Zajedničko deljenje štampača na domaćinima(hosts)/mrežama: "

#: printer/printerdrake.pm:73
#, c-format
msgid "Custom configuration"
msgstr "Custom konfiguracija"

#: printer/printerdrake.pm:78 standalone/scannerdrake:561
#: standalone/scannerdrake:578
#, c-format
msgid "No remote machines"
msgstr "Nema udaljenih mašina"

#: printer/printerdrake.pm:88
#, c-format
msgid "Additional CUPS servers: "
msgstr "Dodatni CUPS serveri: "

#: printer/printerdrake.pm:93
#, c-format
msgid "None"
msgstr "Neijedan"

#: printer/printerdrake.pm:95
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Da bi pristupili štampačima na udaljenim CUPS serverima u vašoj lokalnoj "
"mreži trebasamo da uključite opciju \"Automatski pronađi dostupne štampače "
"na udaljenim mašinama\"; CUPS serveri će izvestiti vašu mašinu o štampačima "
"automatski. Svi štampači koji su trenutno poznati vašoj mašini će biti "
"prikazani u sekciji \"Udaljeni štampači\" u glavnom prozoru Printerdrake. "
"Ukoliko vaš CUPS server(i) nije/nisu u vašoj lokalnoj mreži, morate uneti IP "
"aadresu(e) i opcionalno broj porta(ova)da bi dobavili informacije sa servera."

#: printer/printerdrake.pm:100
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "Promenite sistem za štampanje"

#: printer/printerdrake.pm:101
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:105
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Automatska korekcija CUPS konfiguracije"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Kada se ova opcija uključi, svako pokretanje CUPS automatski osiguravamo da\n"
"\n"
"- ukoliko je LPD/LPRng instaliran, /etc/printcap neće biti preisan od strane "
"CUPS-a\n"
"\n"
"- ukoliko /etc/cups/cupsd.conf nedostaje, biće kreiran\n"
"\n"
"- kada se objavi informacija o štampaču, ona ne sadrži \"localhost\" kao ime "
"servera.\n"
"\n"
"Ukoliko vam neke od ovih mera predstavljaju problem, isključite ovu opciju, "
"ali ćete sami morati da podesite ove opcije."

#: printer/printerdrake.pm:129 printer/printerdrake.pm:205
#, c-format
msgid "Sharing of local printers"
msgstr "Deljenje lokalnih štampača"

#: printer/printerdrake.pm:130
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Ovo su mašine i mreže na kojima se nalaze lokalno povezani štamač(i) koji bi "
"trebali biti dostupni:"

#: printer/printerdrake.pm:141
#, c-format
msgid "Add host/network"
msgstr "Dodaj hosa/mrežu"

#: printer/printerdrake.pm:147
#, c-format
msgid "Edit selected host/network"
msgstr "Uredi selektovanog hosta/mrežu"

#: printer/printerdrake.pm:156
#, c-format
msgid "Remove selected host/network"
msgstr "Ukloni selektovanog hosta/mrežu"

#: printer/printerdrake.pm:187 printer/printerdrake.pm:197
#: printer/printerdrake.pm:210 printer/printerdrake.pm:217
#: printer/printerdrake.pm:248 printer/printerdrake.pm:266
#, c-format
msgid "IP address of host/network:"
msgstr "IP adresa hosta/mreže:"

#: printer/printerdrake.pm:206
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""
"Izaberite mrežu ili hosta na kojem bi lokalni štampači trebali biti dostupni:"

#: printer/printerdrake.pm:213
#, c-format
msgid "Host/network IP address missing."
msgstr "Nedostaje host/mrežna IP adresa."

#: printer/printerdrake.pm:221
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Unešena host/mrežna IP adresa nije ispravna.\n"

#: printer/printerdrake.pm:222 printer/printerdrake.pm:400
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Primeri pravilnih IP adresa:\n"

#: printer/printerdrake.pm:246
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Ovaj host/mreža već postoji na listi, i ne može se ponovo dodati.\n"

#: printer/printerdrake.pm:316 printer/printerdrake.pm:387
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Pristupam šampačima na udaljenim CUPS serverima"

#: printer/printerdrake.pm:317
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Ovde možete dodati CUPS servere čije štampače želite da koristite. Ovo treba "
"da uradite samo ukoliko serveri ne šalju informacije o štampaču na lokalnu "
"mrežu."

#: printer/printerdrake.pm:328
#, c-format
msgid "Add server"
msgstr "Dodaj server"

#: printer/printerdrake.pm:334
#, c-format
msgid "Edit selected server"
msgstr "Uredi selektovani server"

#: printer/printerdrake.pm:343
#, c-format
msgid "Remove selected server"
msgstr "Ukloni selektovani server"

#: printer/printerdrake.pm:388
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "Unesite IP adresu i port hosta čije štampače želite da koristite."

#: printer/printerdrake.pm:389
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:393
#, c-format
msgid "Server IP missing!"
msgstr "Nedostaje IP server!"

#: printer/printerdrake.pm:399
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Unešena IP adresa nije ispravna.\n"

#: printer/printerdrake.pm:411 printer/printerdrake.pm:1629
#, c-format
msgid "The port number should be an integer!"
msgstr "Broj porta bi trebao da bude broj !"

#: printer/printerdrake.pm:422
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Ovaj server već postoji na listi, i ne može se ponovo dodati.\n"

#: printer/printerdrake.pm:433 printer/printerdrake.pm:1650
#: standalone/drakups:233 standalone/harddrake2:64
#, c-format
msgid "Port"
msgstr "Port"

#: printer/printerdrake.pm:478 printer/printerdrake.pm:545
#: printer/printerdrake.pm:610 printer/printerdrake.pm:628
#: printer/printerdrake.pm:711 printer/printerdrake.pm:768
#: printer/printerdrake.pm:794 printer/printerdrake.pm:1703
#: printer/printerdrake.pm:1886 printer/printerdrake.pm:1902
#: printer/printerdrake.pm:1945 printer/printerdrake.pm:1982
#: printer/printerdrake.pm:2024 printer/printerdrake.pm:2061
#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2314
#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2458
#: printer/printerdrake.pm:2568 printer/printerdrake.pm:3069
#: printer/printerdrake.pm:3134 printer/printerdrake.pm:3177
#: printer/printerdrake.pm:3180 printer/printerdrake.pm:3299
#: printer/printerdrake.pm:3364 printer/printerdrake.pm:3436
#: printer/printerdrake.pm:3457 printer/printerdrake.pm:3466
#: printer/printerdrake.pm:3557 printer/printerdrake.pm:3655
#: printer/printerdrake.pm:3661 printer/printerdrake.pm:3674
#: printer/printerdrake.pm:3726 printer/printerdrake.pm:3766
#: printer/printerdrake.pm:3778 printer/printerdrake.pm:3789
#: printer/printerdrake.pm:3798 printer/printerdrake.pm:3811
#: printer/printerdrake.pm:3888 printer/printerdrake.pm:3945
#: printer/printerdrake.pm:4010 printer/printerdrake.pm:4270
#: printer/printerdrake.pm:4313 printer/printerdrake.pm:4459
#: printer/printerdrake.pm:4517 printer/printerdrake.pm:4546
#: standalone/printerdrake:65 standalone/printerdrake:85
#: standalone/printerdrake:515
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:479
#, c-format
msgid "Restarting CUPS..."
msgstr "Restartujem CUPS..."

#: printer/printerdrake.pm:502
#, c-format
msgid "Select Printer Connection"
msgstr "Izbor povezanosti štampača"

#: printer/printerdrake.pm:503
#, c-format
msgid "How is the printer connected?"
msgstr "Kako je štampač povezan?"

#: printer/printerdrake.pm:505
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Štampače na udaljenom CUPS serveru ne moraju da budu podešeni ovde; ovi "
"štampači će biti automatski detektovani."

#: printer/printerdrake.pm:508 printer/printerdrake.pm:4012
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:515
#, fuzzy, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr "Auto-detekcija štampača (Lokalni, TCP/Socket, i SMB štampači)"

#: printer/printerdrake.pm:545
#, c-format
msgid "Checking your system..."
msgstr "Proveravam vaš sistem..."

#: printer/printerdrake.pm:561
#, c-format
msgid "and one unknown printer"
msgstr "i jedan nepoznati štampač"

#: printer/printerdrake.pm:563
#, c-format
msgid "and %d unknown printers"
msgstr "i %d nepoznati štampači"

#: printer/printerdrake.pm:567
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Sledeći štamači\n"
"\n"
"%s%s\n"
"su direktno povezani na vaš sistem"

#: printer/printerdrake.pm:569
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Sledeći štamačr\n"
"\n"
"%s%s\n"
"je direktno povezan na vaš sistem"

#: printer/printerdrake.pm:570
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Sledeći štamač\n"
"\n"
"%s%s\n"
"je direktno povezan na vaš sistem"

#: printer/printerdrake.pm:574
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Postoji jedan nepoznati štamač koje je direktno povezan an vaš sistem"

#: printer/printerdrake.pm:575
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"Prisutno je %d nepoznatih štampača povezanih na vaš sistem"

#: printer/printerdrake.pm:578
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "Nema štampača koji su direktno povezani na vašu mašinu"

#: printer/printerdrake.pm:581
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Proverite da li su svi štampači povezani i uključeni).\n"

#: printer/printerdrake.pm:594
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Da li želite da omogućite štampanje na štampačima koji su gore pomenuti na "
"lokalnoj mreži?\n"

#: printer/printerdrake.pm:595
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Da li želite da omogućite šrampanje na štampačima u lokalnoj mreži?\n"

#: printer/printerdrake.pm:597
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Da li želite da omogućite štampanje na gore pomenutim štampačima?\n"

#: printer/printerdrake.pm:598
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Da li ste sigurni da želite da podesite štampanje na ovoj mašini?\n"

#: printer/printerdrake.pm:599
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"NAPOMENA: U zavisnosti od modela štampača i sistema za štampanje potrebno je "
"još %d MB dodatnog softera da se instalira."

#: printer/printerdrake.pm:629
#, c-format
msgid "Searching for new printers..."
msgstr "Tražim nove štampače..."

#: printer/printerdrake.pm:713
#, c-format
msgid "Configuring printer ..."
msgstr "Podešavanje štampača ..."

#: printer/printerdrake.pm:714 printer/printerdrake.pm:769
#: printer/printerdrake.pm:3790
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Podešavam štampač \"%s\" ..."

#: printer/printerdrake.pm:734
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:735
#, c-format
msgid " on "
msgstr " uklj.  "

#: printer/printerdrake.pm:736 standalone/scannerdrake:136
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:741 printer/printerdrake.pm:2470
#, c-format
msgid "Printer model selection"
msgstr "Selekcija modela štampača"

#: printer/printerdrake.pm:742 printer/printerdrake.pm:2471
#, c-format
msgid "Which printer model do you have?"
msgstr "Koju model štampača imate?"

#: printer/printerdrake.pm:743
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake nije mogao da detektuje vaš model štampača %s. Izaberite "
"odgovarajući model sa liste."

#: printer/printerdrake.pm:746 printer/printerdrake.pm:2476
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Ukoliko se vaš štampač ne nalazi na listi, izaberite kompatibilni "
"(pogledajte upustvo za štampač) ili  sličan njemu."

#: printer/printerdrake.pm:795 printer/printerdrake.pm:3779
#: printer/printerdrake.pm:3946 printer/printerdrake.pm:4271
#: printer/printerdrake.pm:4314 printer/printerdrake.pm:4518
#, c-format
msgid "Configuring applications..."
msgstr "Podešavam aplikacije..."

#: printer/printerdrake.pm:831 printer/printerdrake.pm:843
#: printer/printerdrake.pm:901 printer/printerdrake.pm:1872
#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4211
#, c-format
msgid "Add a new printer"
msgstr "Dodajte novi štampač"

#: printer/printerdrake.pm:832
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za konfigurisanje štampača\n"
"\n"
"Ovaj čarobnjak će vam omogućiti da instalirate lokalne ili udaljene štampače "
"sa ovemašine kao i drugih mašina na mreži.\n"
"\n"
"Od vas će biti tražene sve neophodne informacije za podešavanje štampača a "
"dobićete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima "
"konekcije štampača."

#: printer/printerdrake.pm:845
#, fuzzy, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za podešavanje štampača\n"
"\n"
"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na "
"ovaj računar, poezan direktno na mrežu ili udaljenoj Windows mašini.\n"
"\n"
"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar "
"kao i u električno napajanje da bi mogli biti auto-detektovani. Takođe i "
"mrežni štampač(i)i Windows mašine moraju biti povezane i uključene.\n"
"\n"
"Nemojte da zaboravite da auto-detekcija štampača na mreži traje duže nego za "
"štampače koji se nalaze poveani direktno na vaš računar. Zato isključite "
"auto-detekciju mrežnih i/ili Windows-hosted štampača ako vam to nije "
"potrebno.\n"
"\n"
"Kliknite na \"Sledeći\" kada ste spremni, i na \"Poništi\" ako ne želite da "
"sada podešavate vaš štampač(e)."

#: printer/printerdrake.pm:854
#, fuzzy, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za podešavanje štampača\n"
"\n"
"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na "
"ovaj računar, poezan direktno na mrežu.\n"
"\n"
"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar "
"kao i u električno napajanje da bi mogli biti auto-detektovani.\n"
"\n"
"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne želite da sada "
"podešavate vaš štampač(e)."

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za podešavanje štampača\n"
"\n"
"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampač(e) povezane na "
"ovaj računar, poezan direktno na mrežu.\n"
"\n"
"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na rašunar i "
"u električno napajanje da bi mogli biti auto-detektovani. Takođe i mrežni "
"štampač(i)moraju  biti povezani i uključeni.\n"
"\n"
"Nemojte da zaboravite da auto-detekcija štampača na mreži traje duže nego za "
"štampače koji se nalaze poveani direktno na vaš računar. Zato isključite "
"auto-detekciju mrežnih štampača ako vam to nije potrebno.\n"
"\n"
"Kliknite na \"Sledeći\" kada ste spremni, i na \"Poništi\" ako ne želite da "
"sada podešavate vaš štampač(e)."

#: printer/printerdrake.pm:871
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodošli u Čarobnjak za podešavanje štampača\n"
"\n"
"Ovaj čarobnjak će vam pomoći da instalirate svoj(e) šampaš(e) povezane na "
"ovaj računar, poezan direktno na mrežu.\n"
"\n"
"Ukoliko imate štampač(e) povezane na ovu mašinu, priključite ih na računar "
"kao i u električno napajanje da bi mogli biti auto-detektovani.\n"
"\n"
"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne želite da sada "
"podešavate vaš štampač(e)."

#: printer/printerdrake.pm:880
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Auto-detekcija štampača povezanih sa ovom mašinom"

#: printer/printerdrake.pm:883
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "Auto-detekcija štampača povezanih direktno na lokalnu mrežu"

#: printer/printerdrake.pm:886
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Auto-detekcija štampača konektovanih na mašine na kojima je instaliran "
"Microsoft Windows"

#: printer/printerdrake.pm:902
#, fuzzy, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
"\n"
"Čestitamo, baš štampač je sada instaliran i podešen!\n"
"\n"
"Možete da štampate koristeći \"Štampaj\" komandu u vašoj aplikaciji (obično "
"u \"Fajl\" meniju).\n"
"\n"
"Ukoliko želite da dodate, uklonite ili promenite ime štampaču, ili želite da "
"promenite default opcije (papir, kvalitet štampanja, ...), izaberite "
"\"Štampač\" u \"Hardver\" sekciji Mandrake Kontrolnog Centra."

#: printer/printerdrake.pm:937 printer/printerdrake.pm:1152
#: printer/printerdrake.pm:1214 printer/printerdrake.pm:1304
#: printer/printerdrake.pm:1441 printer/printerdrake.pm:1516
#: printer/printerdrake.pm:1667 printer/printerdrake.pm:1750
#: printer/printerdrake.pm:1759 printer/printerdrake.pm:1768
#: printer/printerdrake.pm:1779 printer/printerdrake.pm:1892
#: printer/printerdrake.pm:1954 printer/printerdrake.pm:1988
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "Instaliram paket %s"

#: printer/printerdrake.pm:939
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:945 printer/printerdrake.pm:1075
#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, c-format
msgid "Printer auto-detection"
msgstr "Auto-detekcija štampača"

#: printer/printerdrake.pm:945
#, c-format
msgid "Detecting devices..."
msgstr "Detektujem  uređaje..."

#: printer/printerdrake.pm:967
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", mrežni štampač \"%s\", port %s"

#: printer/printerdrake.pm:969
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", štampač \"%s\" na SMB/Windows serveru \"%s\""

#: printer/printerdrake.pm:973
#, c-format
msgid "Detected %s"
msgstr "Detektovan %s"

#: printer/printerdrake.pm:977 printer/printerdrake.pm:1000
#: printer/printerdrake.pm:1017
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Štampač na paralelnom portu #%s"

#: printer/printerdrake.pm:981
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Mrežni štamapč \"%s\", port %s"

#: printer/printerdrake.pm:983
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Štampač \"%s\" na SMB/Windows serveru \"%s\""

#: printer/printerdrake.pm:1062
#, c-format
msgid "Local Printer"
msgstr "Lokalni štampač"

#: printer/printerdrake.pm:1063
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Nije pronađen lokalni štampač! Da bi ručno instalirali štampač unesite ime "
"uređaja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/"
"lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/usb/lp0, "
"drugi USB štampač: /dev/usb/lp1, ...)."

#: printer/printerdrake.pm:1067
#, c-format
msgid "You must enter a device or file name!"
msgstr "Morate uneti uređaj ili ime fajla!"

#: printer/printerdrake.pm:1076
#, c-format
msgid "No printer found!"
msgstr "Nije pronađen štampač!"

#: printer/printerdrake.pm:1084
#, c-format
msgid "Local Printers"
msgstr "Lokalni štampači"

#: printer/printerdrake.pm:1085
#, c-format
msgid "Available printers"
msgstr "Dostupni štampači"

#: printer/printerdrake.pm:1089 printer/printerdrake.pm:1098
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Sledeći štamač je auto-detektovan."

#: printer/printerdrake.pm:1091
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Ukoliko to nije onaj koji želite da podesite, unesite ime/ime fajla uređaja "
"u liniju za unos"

#: printer/printerdrake.pm:1092
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"Alternativno, možete da odredite ime/ime fajla uređaja u liniju za unos"

#: printer/printerdrake.pm:1093 printer/printerdrake.pm:1102
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Ovde se nalazi lista auto-detektovanih štampača. "

#: printer/printerdrake.pm:1095
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Izaberite štampač koji želite da podesite unesite ime/ime fajla uređaja u "
"liniju za unos"

#: printer/printerdrake.pm:1096
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Izaberite štampač na koji želite da šaljete dokumente za štampanje ili "
"unesite  ime/ime fajla uređaja u liniju za unos"

#: printer/printerdrake.pm:1100
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Podešavanje štampača će biti potpuno automatsko. Ukoliko vaš štampač nije "
"ispravno detektovan ili želite da sami podešavate štampač, uključite \"Ručna "
"konfiguracija\"."

#: printer/printerdrake.pm:1101
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "Trenutno, ne postoji dtruga alternativa"

#: printer/printerdrake.pm:1104
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Izaberite štampač koji želite da podesite. Podešavanje štampača će biti "
"potpuno automatsko. Ukoliko va štampač nije pravilno detektovan ili više "
"želite da ga sami podesite, uključite \"Ručna konfiguracija\"."

#: printer/printerdrake.pm:1105
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Izaberite štampač na koji će te upućivati sve dokumente."

#: printer/printerdrake.pm:1107
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Izaberite port na koji je vaš štampač povezan ili unesite ime/ime fajla "
"uređaja u liniju za unos"

#: printer/printerdrake.pm:1108
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Izaberite port na koji je vaš računar povezan."

#: printer/printerdrake.pm:1110
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, "
"LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1114
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Morate iabrati/uneti štampač/uređaj!"

#: printer/printerdrake.pm:1154 printer/printerdrake.pm:1216
#: printer/printerdrake.pm:1306 printer/printerdrake.pm:1443
#: printer/printerdrake.pm:1518 printer/printerdrake.pm:1669
#: printer/printerdrake.pm:1752 printer/printerdrake.pm:1761
#: printer/printerdrake.pm:1770 printer/printerdrake.pm:1781
#, fuzzy, c-format
msgid "Aborting"
msgstr "Prekini"

#: printer/printerdrake.pm:1189
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opcije za udaljeni lpd"

#: printer/printerdrake.pm:1190
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Da bi koristili udaljeni lpd štampač, morate da obezbedite ime hosta za "
"server za štampanje kao i ime štampača na tom serveru."

#: printer/printerdrake.pm:1191
#, c-format
msgid "Remote host name"
msgstr "Ime udaljenog host-a"

#: printer/printerdrake.pm:1192
#, c-format
msgid "Remote printer name"
msgstr "Ime udaljeni štampača"

#: printer/printerdrake.pm:1195
#, c-format
msgid "Remote host name missing!"
msgstr "Nedostaje ime udaljenog host-a!"

#: printer/printerdrake.pm:1199
#, c-format
msgid "Remote printer name missing!"
msgstr "Nedostaje ime udaljenog štampača!"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#: standalone/drakTermServ:466 standalone/drakTermServ:764
#: standalone/drakTermServ:780 standalone/drakTermServ:1418
#: standalone/drakTermServ:1426 standalone/drakTermServ:1437
#: standalone/drakbackup:582 standalone/drakbackup:687
#: standalone/drakbackup:722 standalone/drakbackup:840
#: standalone/drakconnect:263 standalone/drakconnect:298
#: standalone/drakconnect:542 standalone/drakconnect:552
#: standalone/drakconnect:576 standalone/harddrake2:160
#, c-format
msgid "Information"
msgstr "Informacije"

#: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799
#, c-format
msgid "Detected model: %s %s"
msgstr "Detektovani modeli: %s %s"

#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563
#, c-format
msgid "Scanning network..."
msgstr "Skeniram mrežu ..."

#: printer/printerdrake.pm:1321 printer/printerdrake.pm:1342
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", štampač \"%s\" na serveru \"%s\""

#: printer/printerdrake.pm:1324 printer/printerdrake.pm:1345
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Štampač \"%s\" na serveru \"%s\""

#: printer/printerdrake.pm:1366
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT)  opcije štampača"

#: printer/printerdrake.pm:1367
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Da biste mogli da štampate na SMB štampaču, treba da navedete\n"
"ime hosta (koje nije uvek isto kao TCP/IP ime mašine);\n"
"IP adresu štampačevog servera; deljeno ime štampača kome pristupate,\n"
"kao i potrebna korisnička imena i lozinke."

#: printer/printerdrake.pm:1368
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
"Ukoliko je željeni štampač auto-detektovan, jednostavno ga izaberite sa "
"liste a zatim dodajte korisničko ime, lozinku, i/ili radnu grupu ukoliko je "
"potrebno."

#: printer/printerdrake.pm:1370
#, c-format
msgid "SMB server host"
msgstr "SMB server  host:"

#: printer/printerdrake.pm:1371
#, c-format
msgid "SMB server IP"
msgstr "SMB server IP:"

#: printer/printerdrake.pm:1372
#, c-format
msgid "Share name"
msgstr "Deljeno (zajedničko)  ime :"

#: printer/printerdrake.pm:1375
#, c-format
msgid "Workgroup"
msgstr "Radna grupa(Workgroup):"

#: printer/printerdrake.pm:1377
#, c-format
msgid "Auto-detected"
msgstr "Auto-detekcija"

#: printer/printerdrake.pm:1387
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Morate dati ili ime servera ili njegov IP!"

#: printer/printerdrake.pm:1391
#, c-format
msgid "Samba share name missing!"
msgstr "Nedostaje deljeno ime za Samba-u!"

#: printer/printerdrake.pm:1397
#, c-format
msgid "SECURITY WARNING!"
msgstr "SIGURNOSNO UPOZORENJE!"

#: printer/printerdrake.pm:1398
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Upravo treba da podesite štampanje na Windows računu sa lozinkom. Usled "
"greške u arhitekturi Samba klijent softvera lozinka se ostavlja u običnom "
"tekstu u komandnoj liniji Samba klijenta koji se koristi za prenošenje "
"poslova štamapča na Windows server. Tako je moguće da svaki korisnik na ovoj "
"mašini prikaže lozinku na ekranu koristeći se komandom  \"ps auxwww\".\n"
"\n"
"mmi vam preporučujemo da koristite jednu od sledećih alternativa (sve u "
"slučaju da ste sigurni da samo mašine sa vaše lokalne mreže mogu pristupiti "
"vašem Windows serveru, recimo u smislu firewall-a):\n"
"\n"
"Koristite račun bez lozinke na vašem Windows serveru, kao \"GUEST\" račun "
"ili specijalan račun kreran za štampanje. Nemojte da uklanjate zaštitu "
"lozinkesa ličnih računa ili računa administratora.\n"
"\n"
"Podesite vaš Windows server da napravi štampače dostupnim  pod LPD "
"protokolom. Zatim podesite štampanje sa ove mašine sa \"%s\" tipom konekcije "
"u Printerdrake-u.\n"
"\n"

#: printer/printerdrake.pm:1408
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Podesite vaš Windows server da omogući pristup štamapču pod IPP protokolom i "
"podesite štampanje sa ove mašine sa \"%s\" tipom konekcije u Printerdrake-"
"u.\n"
"\n"

#: printer/printerdrake.pm:1411
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Povežite vaš štampač na Linux server i dozvolite vašoj Windows mašini(ama) "
"da se konektuje na nju kao klijent.\n"
"\n"
"Da li zaista želite da nastavite da podešavate ovaj štampač kao što to sada "
"radite?"

#: printer/printerdrake.pm:1489
#, c-format
msgid "NetWare Printer Options"
msgstr "NetWare opcije štampača"

#: printer/printerdrake.pm:1490
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Da biste mogli da štampate na NetWare štampač, treba da navedete ime  "
"NetWare servera za štampač (koje nije uvek isto kao TCP/IPhostname! );te  "
"ime 'reda' štampača kome pristupate,kao i potrebna korisnička imena i "
"lozinke."

#: printer/printerdrake.pm:1491
#, c-format
msgid "Printer Server"
msgstr "Server štampača:"

#: printer/printerdrake.pm:1492
#, c-format
msgid "Print Queue Name"
msgstr "Print Queue ime:"

#: printer/printerdrake.pm:1497
#, c-format
msgid "NCP server name missing!"
msgstr "Nedostaje ime NCP servera!"

#: printer/printerdrake.pm:1501
#, c-format
msgid "NCP queue name missing!"
msgstr "Nedostaje ime za NCP red!"

#: printer/printerdrake.pm:1574 printer/printerdrake.pm:1594
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", host \"%s\", port %s"

#: printer/printerdrake.pm:1577 printer/printerdrake.pm:1597
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Host \"%s\", port %s"

#: printer/printerdrake.pm:1618
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/Socket Opcije Štampača"

#: printer/printerdrake.pm:1620
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Izaberite jedan od auto-detektovanih štampača sa liste i unesite ime hosta "
"ili IP i opcionalni broj porta (default je 9100) u polje za unos."

#: printer/printerdrake.pm:1621
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Da bi štampali na TCP ili socket štampač, morate da obezbedite ime hosta ili "
"IP štampača te (opcija) broj porta (default je 9100). Na HP JetDirect "
"serverima broj porta je obično 9100, a na drugim serverima može biti "
"drugačiji. Pogledajte upustvo koje ste dobili uz hardver."

#: printer/printerdrake.pm:1625
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Nedostaje ime hosta ili IP za štampač!"

#: printer/printerdrake.pm:1648
#, c-format
msgid "Printer host name or IP"
msgstr "Ime hosta ili IP za štampač"

#: printer/printerdrake.pm:1704
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "Osvežavam podatake o štampaču..."

#: printer/printerdrake.pm:1707 printer/printerdrake.pm:1709
#, c-format
msgid "Printer Device URI"
msgstr "Uređaj za štampač URI"

#: printer/printerdrake.pm:1708
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Možete direktno odrediti URI za pristup štampaču. URI mora ispunjavati ili "
"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podržani."

#: printer/printerdrake.pm:1731
#, c-format
msgid "A valid URI must be entered!"
msgstr "Morate uneti validan URI!"

#: printer/printerdrake.pm:1834
#, c-format
msgid "Pipe into command"
msgstr "Ubaci u komandu"

#: printer/printerdrake.pm:1835
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Ovde možete da odredite bilo koji komandnu liniju na koji zadatak za štampač "
"treba da bude upućen umesto da se direktno šalje na štampač."

#: printer/printerdrake.pm:1836
#, c-format
msgid "Command line"
msgstr "Komandna linija"

#: printer/printerdrake.pm:1840
#, c-format
msgid "A command line must be entered!"
msgstr "Komandna linija mora biti uneta!"

#: printer/printerdrake.pm:1873
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"Da li je vaš uređaj više-funkcionalni uređaj proidzvođača HP ili Sony "
"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 sa skenereom, DeskJet "
"450, Sony IJP-V100),  HP PhotoSmart ili HP LaserJet 2200?"

#: printer/printerdrake.pm:1887
#, c-format
msgid "Installing HPOJ package..."
msgstr "Instaliram HPOJ paket..."

#: printer/printerdrake.pm:1894
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:1903 printer/printerdrake.pm:2025
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "Proveravam uređaj i podešavam HPOJ..."

#: printer/printerdrake.pm:1946
#, c-format
msgid "Installing SANE packages..."
msgstr "Instaliram SANE pakete..."

#: printer/printerdrake.pm:1956
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:1983
#, c-format
msgid "Installing mtools packages..."
msgstr "Instaliram mtools pakete..."

#: printer/printerdrake.pm:1990
#, fuzzy, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""
"Pristup Foto memorijskoj kartici na vašem HP multi-funkcionalnom uređaju"

#: printer/printerdrake.pm:2005
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "Skeniranje na vašem HP multi-funkcionalnom uređaju"

#: printer/printerdrake.pm:2013
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""
"Pristup Foto memorijskoj kartici na vašem HP multi-funkcionalnom uređaju"

#: printer/printerdrake.pm:2062
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Omogućavam port štampača dostupnim za CUPS..."

#: printer/printerdrake.pm:2071 printer/printerdrake.pm:2315
#: printer/printerdrake.pm:2459
#, c-format
msgid "Reading printer database..."
msgstr "Učitavam CUPS bazu podataka..."

#: printer/printerdrake.pm:2281
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Unesite ime Štampača i Komentare"

#: printer/printerdrake.pm:2285 printer/printerdrake.pm:3421
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Ime štampača treba da sadrži samo slova, brojeve i underscore"

#: printer/printerdrake.pm:2291 printer/printerdrake.pm:3426
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Štampač \"%s\" već postoji,\n"
"da li stvarno želite da ponovo upišete njegove opcije?"

#: printer/printerdrake.pm:2300
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Svaki štampač mora da ima ime (na primer \"štampač\"). Polja za Opis i "
"Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike."

#: printer/printerdrake.pm:2301
#, c-format
msgid "Name of printer"
msgstr "Ime štampača"

#: printer/printerdrake.pm:2302 standalone/drakconnect:557
#: standalone/harddrake2:40 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Description"
msgstr "Opis"

#: printer/printerdrake.pm:2303 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Location"
msgstr "Lokacija"

#: printer/printerdrake.pm:2320
#, c-format
msgid "Preparing printer database..."
msgstr "Pripremam bazu podataka za štampače..."

#: printer/printerdrake.pm:2438
#, c-format
msgid "Your printer model"
msgstr "Vaš model štampača"

#: printer/printerdrake.pm:2439
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake je upoređivao ime modela dobijenog autodetekcijomsa modelima "
"prikazanim u njegovoj bazi podataka da bi pronašao odgovarajući. Ovaj izbor "
"može biti pogrešan, posebno kada se vaš štampač uopštene nalazi u bazi "
"podataka. Zato proverite da je izbor ispravan i kliknite \"Ovaj model je "
"ispravan\" ukoliko jeste a ukoliko nije, kliknite \"Ručno izaberite model\" "
"da bi mogli da sami izaberete štampač na sledećem ekranu.\n"
"\n"
"Za vaš štampač Printerdrake je pronašao:\n"
"\n"
"%s"

#: printer/printerdrake.pm:2444 printer/printerdrake.pm:2447
#, c-format
msgid "The model is correct"
msgstr "Ovaj model je tačan"

#: printer/printerdrake.pm:2445 printer/printerdrake.pm:2446
#: printer/printerdrake.pm:2449
#, c-format
msgid "Select model manually"
msgstr "Ručno izaberite model"

#: printer/printerdrake.pm:2472
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Proverite da li je Printerdrake auto-detektovao vaš štampač korektno. "
"Potražite pravi model na listi kada kursor stoji na pogrešno izabranom "
"modelu ili na \"Raw štampač\"."

#: printer/printerdrake.pm:2491
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:2522
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:2523
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:2524
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:2525
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:2526
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:2527
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:2529
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "Instaliraj rpm"

#: printer/printerdrake.pm:2531 printer/printerdrake.pm:2538
#: standalone/scannerdrake:180 standalone/scannerdrake:188
#: standalone/scannerdrake:239 standalone/scannerdrake:246
#, fuzzy, c-format
msgid "CD-ROM"
msgstr "CDROM"

#: printer/printerdrake.pm:2532 printer/printerdrake.pm:2540
#: standalone/scannerdrake:181 standalone/scannerdrake:190
#: standalone/scannerdrake:240 standalone/scannerdrake:248
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "Flopi"

#: printer/printerdrake.pm:2533 printer/printerdrake.pm:2542
#: standalone/scannerdrake:182 standalone/scannerdrake:192
#: standalone/scannerdrake:241 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Other place"
msgstr "Ostali portovi"

#: printer/printerdrake.pm:2548
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "Izaberite datoteku"

#: printer/printerdrake.pm:2552
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:2558
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:2569
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "Instaliram %s ..."

#: printer/printerdrake.pm:2682
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI win štampač konfiguracija"

#: printer/printerdrake.pm:2683
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Treba da podesite  OKI laserski win štampač. Ovi štampači\n"
"koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade "
"samo kada su povezani na prvi paralelni port. Kada je vaš štampač povezan na "
"drugi port ili na server povežite štampač na prvi paralelni port pre nego "
"ištampate test stranicu ili vaš štampač neće raditi. Postavke za vaš tip "
"konekcije će biti ignorisane od strane drajvera."

#: printer/printerdrake.pm:2707 printer/printerdrake.pm:2736
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Konfiguracija Lexmark inkjet štampača"

#: printer/printerdrake.pm:2708
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Drajveri za inkjet štampače koje je obezbedio Lexmark samo podržavaju "
"lokalne štampače, a ne i štampače na udaljenim mašinama ili print serverima. "
"Povežite vaš štampač na lokalni port ili ga podesite na mašini na koju je "
"povezan."

#: printer/printerdrake.pm:2737
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Da bi mogli da štampate na vašem Lexmark inkjet štampaču morate da imate "
"drajvere koje je kreirao Lexmark (http://www.lexmark.com/).Kliknite na "
"taster \"Drajveri\".  nakon toga izaberite vaš model i operativni sistem, u "
"vašem slučaju \"Linux\". Drajveri su upakovani u RPM pakete ili shell "
"skripte sa interaktivnom grafičkom instalacijom. Ne morate da dradite ovu "
"konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o licenci. Onda "
"ištampajte printhead alignment stranice sa \"lexmarkmaintain\" a podesite "
"opcije za položaj glave sa ovim programom."

#: printer/printerdrake.pm:2746
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "Konfiguracija Lexmark inkjet štampača"

#: printer/printerdrake.pm:2747
#, fuzzy, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""
"Drajveri za inkjet štampače koje je obezbedio Lexmark samo podržavaju "
"lokalne štampače, a ne i štampače na udaljenim mašinama ili print serverima. "
"Povežite vaš štampač na lokalni port ili ga podesite na mašini na koju je "
"povezan."

#: printer/printerdrake.pm:2765
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:2878
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"default opcije za štampač\n"
"\n"
"Proverite da li su veličina papira i vrsta tinte/mod štampanja (ukoliko je "
"dostupan) kao i hardverska konfiguracija za laserske štampače (memorija, "
"duplex jedinica, dodatne kasete) podešeni ispravno. Imajte na umu da pri "
"visokom kvalitetu štampe/rezoluciji štampe štampanje može biti značajnije "
"usporeno."

#: printer/printerdrake.pm:3003
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "Selekcija modela štampača"

#: printer/printerdrake.pm:3010
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Opcija %s mora biti broj!"

#: printer/printerdrake.pm:3014
#, c-format
msgid "Option %s must be a number!"
msgstr "Opcija %s mora biti broj!"

#: printer/printerdrake.pm:3018
#, c-format
msgid "Option %s out of range!"
msgstr "Opcije %s van opsega!"

#: printer/printerdrake.pm:3069
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Da li želite da podesite ovaj štampač (\"%s\")\n"
"kao default štampač?"

#: printer/printerdrake.pm:3084
#, c-format
msgid "Test pages"
msgstr "Testiranje stranica"

#: printer/printerdrake.pm:3085
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Izaberite test sranicu koju želite da štampate.\n"
"Napomena: Ukoliko se radi o foto test stranici može biti potrebno mnogo više "
"vremena da bi se ištampala a laserski štampači sa malo memorije je čak neće "
"ni ištampati. U većini slučajeva dovoljno je da ištampate standardnu test "
"stranicu."

#: printer/printerdrake.pm:3089
#, c-format
msgid "No test pages"
msgstr "Bez test stranice"

#: printer/printerdrake.pm:3090
#, c-format
msgid "Print"
msgstr "Štampaj"

#: printer/printerdrake.pm:3115
#, c-format
msgid "Standard test page"
msgstr "Standardna test stranica"

#: printer/printerdrake.pm:3118
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Alternativna test stranica"

#: printer/printerdrake.pm:3121
#, c-format
msgid "Alternative test page (A4)"
msgstr "Alteernativna test stranica (A4)"

#: printer/printerdrake.pm:3123
#, c-format
msgid "Photo test page"
msgstr "Foto test stranica"

#: printer/printerdrake.pm:3127
#, c-format
msgid "Do not print any test page"
msgstr "Nemoj da štampaj bilo koju test stranicu"

#: printer/printerdrake.pm:3135 printer/printerdrake.pm:3300
#, c-format
msgid "Printing test page(s)..."
msgstr "Štampam test stran(ice)u..."

#: printer/printerdrake.pm:3150
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "Instaliram paket %s"

#: printer/printerdrake.pm:3152
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "Foto test stranica"

#: printer/printerdrake.pm:3169
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Test stran(ice)a je poslana štampač demonu.\n"
"To može dovesti do malog odlaganja starta štampača.\n"
"Status štampača:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3173
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Test stran(ice)a je poslana štampač demonu.\n"
"To može dovesti do malog odlaganja starta štampača.\n"

#: printer/printerdrake.pm:3180
#, c-format
msgid "Did it work properly?"
msgstr "Da li radi ispravno?"

#: printer/printerdrake.pm:3201 printer/printerdrake.pm:4397
#, c-format
msgid "Raw printer"
msgstr "Raw štampač"

#: printer/printerdrake.pm:3231
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Da bi štampali fajl iz komandne linije (ili prozora terminala) možete ili "
"koristiti komandu \"%s <fajl>\" ili prafički alat za štampanje: \"xpp <fajl>"
"\" ili \"kprinter <fajl>\". Grafički alati vam dozovoljavaju da izaberete "
"štampač i izmenite opcije veoma lako.\n"

#: printer/printerdrake.pm:3233
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ove komande takođe možete koristiti u polju \"Komande za štampanje\" "
"dijaloga za štampanje u većem broju aplikacija, ali ovde nemojte da "
"određujete ime fajla jer njega postavlja sama aplikacija iz koje štampate.\n"

#: printer/printerdrake.pm:3236 printer/printerdrake.pm:3253
#: printer/printerdrake.pm:3263
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"Komanda \"%s\" takođe dozvoljava izmenu opcija za konkretni posao štampanja. "
"Jednostavno dodajte željene ocije u komandnu liniju, e. g. \"%s <fajl>\". "

#: printer/printerdrake.pm:3239 printer/printerdrake.pm:3279
#, fuzzy, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Da bi znali koje su vam opcije dostupne za tekući štampač pročitajte listu "
"koja je dole prikazana ili kliknite na taster \"Listu opcija za štampanje\".%"
"s%s\n"
"\n"

#: printer/printerdrake.pm:3243
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Ovde se nalazi lista dostupnih opcija za štampanje za tekući štampač:\n"
"\n"

#: printer/printerdrake.pm:3248 printer/printerdrake.pm:3258
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu "
"\"%s <fajl>\".\n"

#: printer/printerdrake.pm:3250 printer/printerdrake.pm:3260
#: printer/printerdrake.pm:3270
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ova komanda vam je dostupna i u polju \"Konade za štampanje\" dijaloga za "
"štampanje u većini aplikacija. Ali u tom slučaju nemojte da upisujete ime "
"fajla jer je ono već dodeljeno od strane aplikacije.\n"

#: printer/printerdrake.pm:3255 printer/printerdrake.pm:3265
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Da bi dobili listu dostupnih opcija za trenutni štampač kliknite na taster "
"\"Lista opcija štampača\"."

#: printer/printerdrake.pm:3268
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Da bi štampali fajl iz komandne linije (prozora terminala) koristite komandu "
"\"%s <fajl>\" ili \"%s <fajl>\".\n"

#: printer/printerdrake.pm:3272
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Takođe možete da koristite i grafički interfejs \"xpdq\" za opcije za "
"podešavanje poslova štampanja.\n"
"Ako koristite KDE kao desktop okruženje imate \"panično dugme\", ikonicu na "
"desktopu, označenu sa \"ZAUSTAVI Štampač!\",koji zaustavlja sve poslove "
"štampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se "
"zaglavi papir.\n"

#: printer/printerdrake.pm:3276
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Komande \"%s\" i \"%s\" takođe omogućavaju izmenu opcija za konkretni posao "
"štampanja. Jednostavno dodajte željene opcije u komandnu liniju, e. g. \"%s "
"<fajl>\".\n"

#: printer/printerdrake.pm:3286
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Kartice za Štampanje/Skeniranje/Foto na \"%s\""

#: printer/printerdrake.pm:3287
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Štampam/Skeniram na \"%s\""

#: printer/printerdrake.pm:3289
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Kartica za pristup Štampanje/Foto na \"%s\""

#: printer/printerdrake.pm:3290
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Štampam na štampaču \"%s\""

#: printer/printerdrake.pm:3293 printer/printerdrake.pm:3296
#: printer/printerdrake.pm:3297 printer/printerdrake.pm:3298
#: printer/printerdrake.pm:4384 standalone/drakTermServ:325
#: standalone/drakbackup:4265 standalone/drakbug:177 standalone/drakfont:500
#: standalone/drakfont:591 standalone/net_monitor:106
#: standalone/printerdrake:508
#, c-format
msgid "Close"
msgstr "Zatvori"

#: printer/printerdrake.pm:3296
#, c-format
msgid "Print option list"
msgstr "Lista sa opcijama za štampač"

#: printer/printerdrake.pm:3317
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Vaš  multi-funkcionalni uređaj je automatski podešen da bi mogao da skenira. "
"Sada možete da skenirate sa \"scanimage\" (\"scanimage -d hp:%s\" da bi "
"odredili skener koda imate više od jednog) iz komandne linije ili sa "
"grafičkim interfejsima \"xscanimage\" ili \"xsane\". Ukoliko koristite the "
"GIMP, možete takođe skenirati biranjem odgovarajuće stavke u \"File\"/"
"\"Acquire\" meniju. Pogledajte i \"man scanimage\" u komandnoj liniji za "
"više informacija.\n"
"\n"
"Ne koristi \"scannerdrake\" za ovaj uređaj!"

#: printer/printerdrake.pm:3343
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"Vaš štampač se automatski podešava da bi vam dao pristup za foto kartice iz "
"vašeg PC-ja. Sada možete da pristupite vašim foto karticama koristeći se "
"grafičkim programom \"MtoolsFM\" (Meni: \"Aplikacije\" -> \"Fajl alati\" -> "
"\"MTools Fajl Menadžer\") ili naredbom iz komandne linije \"mtools"
"\" (unesite \"man mtools\" u komandnoj liniji za više informacija). Pronaći "
"ćete fajl sistem kartice po oznakom \"p:\", ili potonjim slovom kada imate "
"više od jednog HP štampača sa foto uređajima. U \"MtoolsFM\" možete da "
"zamenite slova uređajima sa poljem koje se nalazi u gonjem-desnom uglu liste "
"fajlova."

#: printer/printerdrake.pm:3365 printer/printerdrake.pm:3767
#, c-format
msgid "Reading printer data..."
msgstr "Učitavam podatke za štampač ..."

#: printer/printerdrake.pm:3385 printer/printerdrake.pm:3412
#: printer/printerdrake.pm:3447
#, c-format
msgid "Transfer printer configuration"
msgstr "Konfiguracija za transfer štampača"

#: printer/printerdrake.pm:3386
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Možete kopirati konfiguraciju štampača koju ste završili za spooler %s to %"
"s, vaš trenutni spooler. Svi konfiguracioni podaci (ime štampača, opis, "
"lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i "
"poslovi štampanja.\n"
"Ni svi queues ne mogu biti prebačeni zbog sledećih razloga:\n"

#: printer/printerdrake.pm:3389
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS ne podržava štampače na Novell serverima ili štampačima koji šalju "
"podatke u slobodno-formiranu komandu.\n"

#: printer/printerdrake.pm:3391
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ podržava samo lokalne štampače, udaljene LPD štampače, i Socket/TCP "
"štampače.\n"

#: printer/printerdrake.pm:3393
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD i LPRng ne podržavaju IPP štampače.\n"

#: printer/printerdrake.pm:3395
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"Kao dodatak, queues koji su kreirani sa ovim programom ili  \"foomatic-"
"configure\" ne mogu biti prebačeni."

#: printer/printerdrake.pm:3396
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Takođe, štampači konfigurisani sa PPD fajlovima koji potiču od proizvođača "
"ili sa osnovnim CUPS drajverima ne mogu biti prebačeni."

#: printer/printerdrake.pm:3397
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Označite štampače koje želite da prebacite i kliknite na \n"
"\"Prebaci\"."

#: printer/printerdrake.pm:3400
#, c-format
msgid "Do not transfer printers"
msgstr "Ne prebacuj štampače"

#: printer/printerdrake.pm:3401 printer/printerdrake.pm:3417
#, c-format
msgid "Transfer"
msgstr "Prebaci"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"Štampač \"%s\" već postoji pod  %s. \n"
"Klikni na \"Prebaci\" da bi prešli preko starog.\n"
"Možete ukucati i novo ime ili preskočiti ovaj štampač."

#: printer/printerdrake.pm:3434
#, c-format
msgid "New printer name"
msgstr "Novo ime štampača"

#: printer/printerdrake.pm:3437
#, c-format
msgid "Transferring %s..."
msgstr "Transferišem %s ..."

#: printer/printerdrake.pm:3448
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Prebacili ste svoj bivši default štampač (\"%s\"), Da li treba da bude "
"ponovo default štampač pod novim sistemom za štampanje %s?"

#: printer/printerdrake.pm:3458
#, c-format
msgid "Refreshing printer data..."
msgstr "Osvežavam podatake o štampaču..."

#: printer/printerdrake.pm:3467
#, c-format
msgid "Starting network..."
msgstr "Startujem mrežu ..."

#: printer/printerdrake.pm:3508 printer/printerdrake.pm:3512
#: printer/printerdrake.pm:3514
#, c-format
msgid "Configure the network now"
msgstr "Podesi mrežu sada"

#: printer/printerdrake.pm:3509
#, c-format
msgid "Network functionality not configured"
msgstr "Mrežna funkcionalnost nije podešena"

#: printer/printerdrake.pm:3510
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Treba da podesite udaljeni štampač. Za to vam je potreban mrežni pristup, "
"ali vaša mreža nije još podešena. Ukoliko nastavite bez mreže konfiguracije, "
"nećete moći da koristite štampač koji sada podešavate. Kako želite da "
"nastavite?"

#: printer/printerdrake.pm:3513
#, c-format
msgid "Go on without configuring the network"
msgstr "Nastavi dalje bez podešavanja mreže"

#: printer/printerdrake.pm:3547
#, fuzzy, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"Mrežna konfiguracija koja je kreirana tokom instalcije ne može sada da se "
"pokrene. Proverite da li je mreža dostupna nakon restarta sistema i "
"ispravite konfiguraciju koristeći Mandrake CKontrolni Centar, sekcija "
"\"Mreža & Internet\"/\"Konenkcija\", i nakon toga podesite štampač, takođe "
"korištenjem Mandrake Kontrolnog Centra, sekcija \"Hardver\"/\"Štampač\""

#: printer/printerdrake.pm:3548
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Mrežni pristup nije pokrenut i ne može da se startuje. Proverite vašu "
"konfiguraciju i vaše hardverske komponente. Onda probajte ponova da podesite "
"udaljeni štampač."

#: printer/printerdrake.pm:3558
#, c-format
msgid "Restarting printing system..."
msgstr "Restartujem sistem za štampanje ..."

#: printer/printerdrake.pm:3597
#, c-format
msgid "high"
msgstr "veliki"

#: printer/printerdrake.pm:3597
#, c-format
msgid "paranoid"
msgstr "paranoidni"

#: printer/printerdrake.pm:3598
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Instaliram sistem za štampanje u %s sigurnosnom nivou"

#: printer/printerdrake.pm:3599
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Sada treba da instalirate sistem za štampanje %s na sistemu koji se nalazi u "
"%s sigurnosnom nivou.\n"
"\n"
"Ovaj sistem za štampanje pokreće demon (pozadinski proces) koji čeka na "
"poslove štampanja i upravlja njima. Ovaj demon je takođe dostupan preko "
"udaljenih mašina preko mreže pa je time podložan napadima. Zbog toga samo "
"par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.\n"
"\n"
"Da li stvarno želite da podesite štampanje na ovoj mašini?"

#: printer/printerdrake.pm:3633
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Pokreni sistem za štampanje pri staranju sistema"

#: printer/printerdrake.pm:3634
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Sistem za štampanje (%s)neće biti automatski pokrenut pri startanju mašine.\n"
"\n"
"Moguće je automatsko startanje isključeno promenom na višlji nivo "
"sigurnosti, zbog toga što je sistem za štampanje primamljiv za napade.\n"
"\n"
"Da li ponovo želite da automatski startujete sistem za štampanje ?"

#: printer/printerdrake.pm:3655 printer/printerdrake.pm:3889
#, c-format
msgid "Checking installed software..."
msgstr "Proveravam instalirani softver..."

#: printer/printerdrake.pm:3661
#, c-format
msgid "Removing %s ..."
msgstr "Ukanjam %s ..."

#: printer/printerdrake.pm:3665
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "Promenite sistem za štampanje"

#: printer/printerdrake.pm:3674
#, c-format
msgid "Installing %s ..."
msgstr "Instaliram %s ..."

#: printer/printerdrake.pm:3678
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "Promenite sistem za štampanje"

#: printer/printerdrake.pm:3727
#, c-format
msgid "Setting Default Printer..."
msgstr "Podešavanje Default štampača..."

#: printer/printerdrake.pm:3747
#, c-format
msgid "Select Printer Spooler"
msgstr "Izaberite Spooler za štampač"

#: printer/printerdrake.pm:3748
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Koji sistem za štampanje (spooler) želite da koristite ?"

#: printer/printerdrake.pm:3799
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Neuspelo podešavanje štampača \"%s\"!"

#: printer/printerdrake.pm:3812
#, c-format
msgid "Installing Foomatic..."
msgstr "Instaliram Foomatic ..."

#: printer/printerdrake.pm:3818
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:3910
#, c-format
msgid "Could not install necessary packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4011
#, fuzzy, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"Sledeći štaThe following printers are configured. Double-click on a printer "
"to change its settings; to make it the default printer; or to view "
"information about it."

#: printer/printerdrake.pm:4039
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "prikaži sve dostupne udaljene CUPS štampače"

#: printer/printerdrake.pm:4040
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
"Osveži listu štampača (da bi prikazao sve dostupne udaljene CUPS štampače)"

#: printer/printerdrake.pm:4050
#, c-format
msgid "CUPS configuration"
msgstr "CUPS konfiguracija"

#: printer/printerdrake.pm:4062
#, c-format
msgid "Change the printing system"
msgstr "Promenite sistem za štampanje"

#: printer/printerdrake.pm:4071
#, c-format
msgid "Normal Mode"
msgstr "Normalni Mod"

#: printer/printerdrake.pm:4072
#, c-format
msgid "Expert Mode"
msgstr "Ekspert mod"

#: printer/printerdrake.pm:4343 printer/printerdrake.pm:4398
#: printer/printerdrake.pm:4479 printer/printerdrake.pm:4489
#, c-format
msgid "Printer options"
msgstr "Opcije štampača"

#: printer/printerdrake.pm:4379
#, c-format
msgid "Modify printer configuration"
msgstr "Izmena konfiguracije štampača"

#: printer/printerdrake.pm:4381
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Štampač %s\n"
"Da li hoćete da izmenite opcije za ovaj štampač?"

#: printer/printerdrake.pm:4385
#, c-format
msgid "Do it!"
msgstr "Uradi to!"

#: printer/printerdrake.pm:4390 printer/printerdrake.pm:4448
#, c-format
msgid "Printer connection type"
msgstr "Tip konekcije štampača"

#: printer/printerdrake.pm:4391 printer/printerdrake.pm:4452
#, c-format
msgid "Printer name, description, location"
msgstr "Ime, opis i lokacija štampača"

#: printer/printerdrake.pm:4393 printer/printerdrake.pm:4471
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Proizvođač, model i drajver štampača"

#: printer/printerdrake.pm:4394 printer/printerdrake.pm:4472
#, c-format
msgid "Printer manufacturer, model"
msgstr "Proizođač i model štampača"

#: printer/printerdrake.pm:4400 printer/printerdrake.pm:4483
#, c-format
msgid "Set this printer as the default"
msgstr "Podesi ovaj štampač kao default"

#: printer/printerdrake.pm:4402 printer/printerdrake.pm:4490
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodaj ovaj štampač u Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4403 printer/printerdrake.pm:4495
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Ukloni ovaj štampač iz Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4404 printer/printerdrake.pm:4500
#, c-format
msgid "Print test pages"
msgstr "Ištampaj test stranice"

#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4502
#, c-format
msgid "Learn how to use this printer"
msgstr "Naučite kako da koristite ovaj štampač"

#: printer/printerdrake.pm:4406 printer/printerdrake.pm:4504
#, c-format
msgid "Remove printer"
msgstr "Ukloni štampač"

#: printer/printerdrake.pm:4460
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Uklanjam stari štampač \"%s\" ..."

#: printer/printerdrake.pm:4491
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodajem štampač u Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4493
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "Štampač \"%s\" je uspešno dodan u Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4494
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "Neuspelo dodavanje štampača \"%s\" u Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4496
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Uklanjanje štampača iz Star Office/OpenOffice.org/GIMP"

#: printer/printerdrake.pm:4498
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""
"Štampač \"%s\" je uspešno uklonjen iz Star Office/OpenOffice.org/GIMP-a"

#: printer/printerdrake.pm:4499
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
"Neospeo pokušaj uklanjanja štampača \"%s\" iz Star Office/OpenOffice.org/"
"GIMP-a"

#: printer/printerdrake.pm:4543
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Da li hoćete da uklonite štampač \"%s\"?"

#: printer/printerdrake.pm:4547
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Uklanjam štampač \"%s\" ..."

#: printer/printerdrake.pm:4571
#, c-format
msgid "Default printer"
msgstr "Default štampač"

#: printer/printerdrake.pm:4572
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Štampač  \"%s\" je sada postavljen kao default štampač."

#: raid.pm:37
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Nije moguće dodati particiju na _formatiran_ RAID md%d"

#: raid.pm:139
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid neuspelo (možda nedostaje raidtools ?)"

#: raid.pm:139
#, c-format
msgid "mkraid failed"
msgstr "mkraid neuspelo"

#: raid.pm:155
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nema dovoljno particija za RAID nivo %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:65 standalone/scannerdrake:69
#: standalone/scannerdrake:77 standalone/scannerdrake:339
#: standalone/scannerdrake:414 standalone/scannerdrake:458
#: standalone/scannerdrake:462 standalone/scannerdrake:484
#: standalone/scannerdrake:549
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:915
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, fuzzy, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Prihvati/Odbij IPv4 poruke o greškama."

#: security/help.pm:13
#, fuzzy, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij prenosivi icmp echo."

#: security/help.pm:15
#, fuzzy, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij icmp echo."

#: security/help.pm:17
#, fuzzy, c-format
msgid "Allow/Forbid autologin."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli autologovanje."

#: security/help.pm:19
#, fuzzy, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Ako je \\fIarg\\fP = ALL allow /etc/issue i /etc/issue.net ne postoji. Ako "
"je \\fIarg\\fP = NONE nijedana radnja nije\n"
"dozvoljena ili je samo /etc/issue dozvoljen."

#: security/help.pm:25
#, fuzzy, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli restartovanje od strane konzlolnog korisnika."

#: security/help.pm:27
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli udaljeno root logovanje."

#: security/help.pm:29
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli diektno root logovanje."

#: security/help.pm:31
#, fuzzy, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli listu korisnika na sistemu u menadžerima za displej (kdm "
"i gdm)."

#: security/help.pm:33
#, fuzzy, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Argumenti: (arg, listen_tcp=None)\n"
"\n"
"Dozvoljava/Nedozvoljava X konekciju. Prvi argument određije šta je urađeno\n"
"sa strane klijenta: ALL (sve konekcije su dozvoljene), LOCAL (samo\n"
"lpkalne konekcije) i NONE (bez konekcije)."

#: security/help.pm:41
#, fuzzy, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Argument određuje da li klijent autorzivan za konekovanje na\n"
"X server na tcp portu 6000 ili nije."

#: security/help.pm:44
#, fuzzy, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Autorizuje sve servise koje kontroliše tcp_wrappers (see hosts.deny(5)) ako "
"je \\fIarg\\fP = ALL. Samo lokalni\n"
"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. Za autorizaciju vama "
"potrebnih servisa , koristite /etc/hosts.allow\n"
"(see hosts.allow(5))."

#: security/help.pm:54
#, fuzzy, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"Argumenti: ()\n"
"\n"
"Ukoliko je SERVER_LEVEL (ili je SECURE_LEVEL odsutan) veći od 3\n"
"u /etc/security/msec/security.conf, kreira simbolički link /etc/security/"
"msec/server\n"
"da upućuje na /etc/security/msec/server.<SERVER_LEVEL>.  /etc/security/msec/"
"server\n"
"se koristi od strane chkconfig --add da bi dodali servis ukoliko je prisutan "
"u fajlu\n"
"tokom instalacije paketa."

#: security/help.pm:63
#, fuzzy, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući crontab i at za korisnike. Postavite korisnike sa "
"dozvolama u /etc/cron.allow i /etc/at.allow\n"
"(pročitajte man at(1) i crontab(1))."

#: security/help.pm:68
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:70
#, fuzzy, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogući/Onemogući zaštitu za name resolution spoofing.  Ako je\n"
"\\fIalert\\fP istinit, i to prijavite u syslog."

#: security/help.pm:73
#, fuzzy, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogući/Onemogući IP spoofing zaštitu."

#: security/help.pm:75
#, fuzzy, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući libsafe ako je libsafe pronađen na sistemu."

#: security/help.pm:77
#, fuzzy, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući prijavljivanje IPv4 strange paketa."

#: security/help.pm:79
#, fuzzy, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući msec proveru sigurnosti na svaki čas."

#: security/help.pm:81
#, fuzzy, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogućavanje su samo za korisnije wheel grupe ili za svakog korisnika."

#: security/help.pm:83
#, fuzzy, c-format
msgid "Use password to authenticate users."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: security/help.pm:85
#, fuzzy, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Aktiviraj/Deaktiviraj proveru promiskuiteta mrežnih kartica."

#: security/help.pm:87
#, fuzzy, c-format
msgid " Activate/Disable daily security check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Aktiviraj/Deaktiviraj dnevne sigurnosne provere."

#: security/help.pm:89
#, fuzzy, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogući/Onemogući sulogin(8) u single user nivou."

#: security/help.pm:91
#, fuzzy, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""
"Argumenti: (name)\n"
"\n"
"Add the name as an exception to the handling of password aging by msec."

#: security/help.pm:93
#, fuzzy, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""
"Argumenti: (max, inactive=-1)\n"
"\n"
"Podesite lozinku ciljajući na \\fImax\\fP dana i izmena pauze na  "
"\\fIinactive\\fP."

#: security/help.pm:95
#, fuzzy, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Podesite istoriju pamćenja lozinki da bi sprečili ponovnu upotrebu lozinke."

#: security/help.pm:97
#, fuzzy, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Argumenti: (length, ndigits=0, nupper=0)\n"
"\n"
"Podesite najmanju dužinu lozinke i najmanji broj brojeva i minimalan broj "
"velikih slova."

#: security/help.pm:99
#, fuzzy, c-format
msgid "Set the root umask."
msgstr ""
"Argumenti: (umask)\n"
"\n"
"Podesite root umask."

#: security/help.pm:100
#, c-format
msgid "if set to yes, check open ports."
msgstr "ukoliko je podešeno na da, označite otvorene portove."

#: security/help.pm:101
#, fuzzy, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"ukoliko je podešene na da, proverite prazne lozinke, bez lozinke u /etc/"
"shadow i  korisnike sa 0 id različih od root."

#: security/help.pm:108
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"ukoliko je podešeno na da, proverite ovlašćenja za fajlove u korisničkom "
"home diretorijumu."

#: security/help.pm:109
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
"ukoliko je podešeno na da, proverite da li su mrežni uređaji u promiscuous "
"modu."

#: security/help.pm:110
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "ukoliko je podešeno na da, pokrenite dnevne sigurnosne provere."

#: security/help.pm:111
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "ukoliko je podešeno na da, označite dodavanje/uklanjanje sgid fajlova."

#: security/help.pm:112
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "ukoliko je podešeno na da, prverite praznu lozinku u /etc/shadow."

#: security/help.pm:113
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "ukoliko je podešeno na da, proverite checksum za suid/sgid fajlove."

#: security/help.pm:114
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
"ukoliko je podešeno na da, označite dodavanje/uklanjanje za suid root "
"fajlove."

#: security/help.pm:115
#, c-format
msgid "if set to yes, report unowned files."
msgstr "ukoliko je podešeno na da, prijavite fajlove bez vlasnika."

#: security/help.pm:116
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"ukoliko je podešeno na da, označite fajlove/diretorijume upisivim za sve "
"korisnike."

#: security/help.pm:117
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "ukoliko je podešeno na da, pokrenite chkrootkit provere."

#: security/help.pm:118
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""
"ukoliko je podešeno, pošaljite izveštaj na ovu email adresu uli je pošaljite "
"root-u."

#: security/help.pm:119
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "ukoliko kažete da, pošaljite rezultat provere mail-om."

#: security/help.pm:120
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "ukoliko je podešeno na da, pokrenite proveru rpm baze podataka."

#: security/help.pm:122
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "ukoliko je podešeno na da, pošaljite izveštaj o proveri u syslog."

#: security/help.pm:123
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "ukoliko je podešeno na da, izveštaj o proveri pošaljite na tty."

#: security/help.pm:125
#, fuzzy, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Argumenti: (size)\n"
"\n"
"Podesite shell veličinu istorije za komande. Vrednost -1 znači da nema "
"linita."

#: security/help.pm:127
#, fuzzy, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
"Argumenti: (val)\n"
"\n"
"Podesite shell pauzu. Vrednost zero - nula znači da nema pauze."

#: security/help.pm:127
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:129
#, fuzzy, c-format
msgid "Set the user umask."
msgstr ""
"Argumenti: (umask)\n"
"\n"
"Podešavanje korisničkog umask."

#: security/l10n.pm:11
#, fuzzy, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Prihvati/Odbij IPv4 poruke o greškama."

#: security/l10n.pm:12
#, fuzzy, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij prenosivi icmp echo."

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli udaljeno root logovanje."

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, fuzzy, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli listu korisnika na sistemu u menadžerima za displej (kdm "
"i gdm)."

#: security/l10n.pm:20
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "Winmodem konekcija"

#: security/l10n.pm:21
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:22
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:23
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "Podesi servise"

#: security/l10n.pm:24
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:25
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:27
#, fuzzy, c-format
msgid "Enable IP spoofing protection"
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogući/Onemogući IP spoofing zaštitu."

#: security/l10n.pm:28
#, fuzzy, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući libsafe ako je libsafe pronađen na sistemu."

#: security/l10n.pm:29
#, fuzzy, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući prijavljivanje IPv4 strange paketa."

#: security/l10n.pm:30
#, fuzzy, c-format
msgid "Enable msec hourly security check"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogući/Onemogući msec proveru sigurnosti na svaki čas."

#: security/l10n.pm:31
#, fuzzy, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogućavanje su samo za korisnije wheel grupe ili za svakog korisnika."

#: security/l10n.pm:32
#, fuzzy, c-format
msgid "Use password to authenticate users"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: security/l10n.pm:33
#, fuzzy, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Aktiviraj/Deaktiviraj proveru promiskuiteta mrežnih kartica."

#: security/l10n.pm:34
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:35
#, fuzzy, c-format
msgid "Sulogin(8) in single user level"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogući/Onemogući sulogin(8) u single user nivou."

#: security/l10n.pm:36
#, fuzzy, c-format
msgid "No password aging for"
msgstr "Bez lozinke"

#: security/l10n.pm:37
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:38
#, fuzzy, c-format
msgid "Password history length"
msgstr "Ova lozinka je previše prosta"

#: security/l10n.pm:39
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:40
#, fuzzy, c-format
msgid "Root umask"
msgstr "Root lozinka"

#: security/l10n.pm:41
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:42
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "Pauza pri startanju kernela"

#: security/l10n.pm:43
#, fuzzy, c-format
msgid "User umask"
msgstr "Korisnici"

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "Check open ports"
msgstr "Detektovano na portu %s"

#: security/l10n.pm:45
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:46
#, fuzzy, c-format
msgid "Check permissions of files in the users' home"
msgstr ""
"ukoliko je podešeno na da, proverite ovlašćenja za fajlove u korisničkom "
"home diretorijumu."

#: security/l10n.pm:47
#, fuzzy, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""
"ukoliko je podešeno na da, proverite da li su mrežni uređaji u promiscuous "
"modu."

#: security/l10n.pm:48
#, fuzzy, c-format
msgid "Run the daily security checks"
msgstr "ukoliko je podešeno na da, pokrenite dnevne sigurnosne provere."

#: security/l10n.pm:49
#, fuzzy, c-format
msgid "Check additions/removals of sgid files"
msgstr "ukoliko je podešeno na da, označite dodavanje/uklanjanje sgid fajlova."

#: security/l10n.pm:50
#, fuzzy, c-format
msgid "Check empty password in /etc/shadow"
msgstr "ukoliko je podešeno na da, prverite praznu lozinku u /etc/shadow."

#: security/l10n.pm:51
#, fuzzy, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "ukoliko je podešeno na da, proverite checksum za suid/sgid fajlove."

#: security/l10n.pm:52
#, fuzzy, c-format
msgid "Check additions/removals of suid root files"
msgstr ""
"ukoliko je podešeno na da, označite dodavanje/uklanjanje za suid root "
"fajlove."

#: security/l10n.pm:53
#, fuzzy, c-format
msgid "Report unowned files"
msgstr "ukoliko je podešeno na da, prijavite fajlove bez vlasnika."

#: security/l10n.pm:54
#, fuzzy, c-format
msgid "Check files/directories writable by everybody"
msgstr ""
"ukoliko je podešeno na da, označite fajlove/diretorijume upisivim za sve "
"korisnike."

#: security/l10n.pm:55
#, fuzzy, c-format
msgid "Run chkrootkit checks"
msgstr "ukoliko je podešeno na da, pokrenite chkrootkit provere."

#: security/l10n.pm:56
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:57
#, fuzzy, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
"ukoliko je podešeno, pošaljite izveštaj na ovu email adresu uli je pošaljite "
"root-u."

#: security/l10n.pm:58
#, fuzzy, c-format
msgid "Report check result by mail"
msgstr "ukoliko kažete da, pošaljite rezultat provere mail-om."

#: security/l10n.pm:59
#, fuzzy, c-format
msgid "Run some checks against the rpm database"
msgstr "ukoliko je podešeno na da, pokrenite proveru rpm baze podataka."

#: security/l10n.pm:60
#, fuzzy, c-format
msgid "Report check result to syslog"
msgstr "ukoliko je podešeno na da, pošaljite izveštaj o proveri u syslog."

#: security/l10n.pm:61
#, fuzzy, c-format
msgid "Reports check result to tty"
msgstr "ukoliko je podešeno na da, izveštaj o proveri pošaljite na tty."

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Dobrošli kod Krakera"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Bedna"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Velika"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Višlji"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Paranoidna"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Na ovom nivou treba obratiti pažnju. On pravi vaš sistem lakšim\n"
"za upotrebu, ali i  veoma osetljivim: ne sme biti korišten na mašini\n"
"koja je povezana sa drugim mašinama ili na internet. Ovde ne postoji\n"
"pristup sa lozinkom."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Lozinke su sada omogućene, ali se i dalje ne preporučuje da se koristi\n"
"kao mrežni računar."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Ovo je standardno sigurnosno okruženje preporučeno za računare koji  će "
"biti  koršćeni za vezu sa Internetom ili kao klijent."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Već postoje neka ograničenja, a više automatskih provera se pokreće svake "
"noći."

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Sa ovim sigurnosnim nivoom, korišćenje ovog sistema kao servera postaje "
"moguće.\n"
"Sigurnost je sada dovoljno velika za korišćenje mašine za server koji "
"prihvata\n"
"konekcije brojnih klijenata. Napomena: ukoliko je vaša mašina samo klijent "
"na Internetu, trebali bi da izaberete niži nivo."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Ovo je slično prethodnom nivou, ali je sada sistem potpuno zatvoren i "
"sigurnosne opcije su maksimalne."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "DrakSec Osnovne Opcije"

#: security/level.pm:56
#, c-format
msgid "Please choose the desired security level"
msgstr "Izaberite željeni sigurnosni nivo"

#: security/level.pm:60
#, c-format
msgid "Security level"
msgstr "Sigurnosni nivo"

#: security/level.pm:62
#, c-format
msgid "Use libsafe for servers"
msgstr "Koristi libsafe za servere"

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "Biblioteka koja štiti od buffer overflow-a i format string napada."

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Administracija Nivoa Sigurnosti (login ili email)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron -  podesite period.komande"

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd se koristi za praćenje statusa baterije i logovanje preko syslog.\n"
"Koristi se i za gašenje mašine (radi i na desktop mašinama) kada je baterija "
"slaba"

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Pokreće komande zakazane at komandom,kao i  batch  komande kao je "
"opterećenost\n"
"sistema mala."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron je standardni UNIX program koji pokreće korisničke programe\n"
"preriodično u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
"uključujući bolju  sigurnost i bolju podesivost."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM daje podršku za miša za teksulano-bazirane aplikacije kao što je\n"
"Midnight Commander.Isto tako daje podršku za  pop-up menije na  konzoli."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake starta ispitivanje haredvera, i po potrebi đe podesiti \n"
"novi/izmenjeni hardver."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache je  WWW server. On se koristi da opslužuje  HTML fajlove\n"
"i CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Interent super server demon (znan kao netd) starta \n"
"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
"elnet, ftp, rsh, i  rlogin.Isključujući njega, isključujete i servise \n"
"za koje je on odgovoran."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
"firewall radi zaštite vaše mašine od mrežnih napada."

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Ovaj paket aktivira odabranu mapu tastature kako je podešeno \n"
"u  /etc/sysconfig/keyboard.Ovo se podešava koristeći kbdconfig alatku.\n"
"Treba da bude uključen na većinu mašina."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
"/usr/include/linux/{autoconf,version}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf đe ponekad izvoditi razne zadatke tokom\n"
"startanja sistema radi održavanja i podešavanja sistema."

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd je print demon potreban  da bi lpr radio dobro.To je \n"
"u osnovi server koji arbitrira  print poslove štampaču(ima)."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
"servera."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host "
"ime IP adresi."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Montiranje i demontiranje svih Mrežnih fajl sistema(NFS), SMB (Lan\n"
"Manager/Windows), i  NCP (NetWare) tačaka montiranja. "

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiviranje i deaktiviranje svih mrežnih interfejsa konfigurisanih za "
"start \n"
"pri podizanju sistema."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mreža.\n"
"Ovaj servis omogućava funkcionalnost NFS servera,koji se konfiguriše preko \n"
"/etc/exports datoteke."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mreža.\n"
"Ovaj servis omogućava funkcionalnost NFS  file locking funkcije"

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Automatski uključuje numlock taster pod konzolom\n"
"i u XFree pri startanju."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Podrška za OKI 4w i kompatibilne mu  win štampače."

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA podrška  se obično koristi za  eternet i modeme u laptopovima.\n"
"Neće se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
"na sistemu kom nije potreban."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmaper uravlja  RPC konekcijama,koje koriste\n"
"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na mašinama\n"
"koje rade kao serveri za protokole koji koriste RPC mehanizam."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix je  Mail Transport Agent,koji u stvaripremešta poštu sa jedne mašine "
"na drugu."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"čuva i obnavlja sistemski  entropy pool za veći kvalitet generisanje\n"
"slučajnih brojeva."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Dodeljuje raw urećaje za blok urećaje (kao što su hard disk\n"
"particije), što mođe biti korisno za aplikacije kao što je Oracle ili DVD "
"plejeri"

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
"RIP protokola.Dok se RIP dosta korisiti na malim mrežama,kompleksniji \n"
" routing protokoli su potrebni za kompleksne mreže."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokol dozvoljava korisnicima na mreži da omoguće\n"
"merenje performansi za bilo koju mašinu na toj  mreži."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokol omogućava korisnicima na mreži da otkriju ko je\n"
"ulogovan na drugim mašinama."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (slično finger-u)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Pokreće sistem za zvuk na vašoj mašini"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog je objekat pomoću kog mnogi demoni koriste za logovanje poruka\n"
"u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Podiže drajvere za vaše usb uređaje."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Pokreće X Font server (potrebno za pokretanje XFree)."

#: services.pm:117 services.pm:159
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Izaberite koje servisi treba automatski da se pokrenu pri startanju"

#: services.pm:129
#, c-format
msgid "Printing"
msgstr "Štampanje"

#: services.pm:130
#, c-format
msgid "Internet"
msgstr "Internet"

#: services.pm:133
#, c-format
msgid "File sharing"
msgstr "Zajedničko deljenje fajlova"

#: services.pm:140
#, c-format
msgid "Remote Administration"
msgstr "Udaljena administracija"

#: services.pm:148
#, c-format
msgid "Database Server"
msgstr "Server Baze podataka"

#: services.pm:211
#, c-format
msgid "running"
msgstr "pokrenuto"

#: services.pm:211
#, c-format
msgid "stopped"
msgstr "zaustavljeno"

#: services.pm:215
#, c-format
msgid "Services and deamons"
msgstr "Servisi i demoni"

#: services.pm:221
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"žalim ali nema dodatnih informacija\n"
"o ovom servisu."

#: services.pm:226 ugtk2.pm:1167
#, c-format
msgid "Info"
msgstr "Info"

#: services.pm:229
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:229
#, c-format
msgid "On boot"
msgstr "Pri startanju"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Start"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Stop"

#: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13
#: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13
#, fuzzy, c-format
msgid "<b>Congratulations for choosing Mandrakelinux!</b>"
msgstr "Hvala vam što ste izabrali Mandrakelinux 9.2"

#: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15
#: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15
#, fuzzy, c-format
msgid "Welcome to the Open Source world!"
msgstr "Dobrodošli u Svet Open Source-a"

#: share/advertising/dis-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux operating system and its many applications is the "
"result of collaborative efforts between MandrakeSoft developers and "
"Mandrakelinux contributors throughout the world."
msgstr ""

#: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19
#: share/advertising/ppp-01.pl:19
#, c-format
msgid ""
"We would like to thank everyone who participated in the development of this "
"latest release."
msgstr ""

#: share/advertising/dis-02.pl:13
#, fuzzy, c-format
msgid "<b>Discovery</b>"
msgstr "Drajver"

#: share/advertising/dis-02.pl:15
#, c-format
msgid ""
"Discovery is the easiest and most user-friendly Linux distribution. It "
"includes a hand-picked selection of premium software for Office, Multimedia "
"and Internet activities."
msgstr ""

#: share/advertising/dis-02.pl:17
#, c-format
msgid "The menu is task-oriented, with a single selected application per task."
msgstr ""

#: share/advertising/dis-03.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr ""

#: share/advertising/dis-03.pl:15
#, c-format
msgid ""
"The powerful Open Source graphical desktop environment KDE is the desktop of "
"choice for the Discovery Pack."
msgstr ""

#: share/advertising/dis-04.pl:13
#, c-format
msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
msgstr ""

#: share/advertising/dis-04.pl:15
#, c-format
msgid ""
"<b>WRITER</b> is a powerful word processor for creating all types of text "
"documents. Documents may include images, diagrams and tables."
msgstr ""

#: share/advertising/dis-04.pl:16
#, c-format
msgid ""
"<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
"analyze and manage all of your data."
msgstr ""

#: share/advertising/dis-04.pl:17
#, c-format
msgid ""
"<b>IMPRESS</b> is the fastest, most powerful way to create effective "
"multimedia presentations."
msgstr ""

#: share/advertising/dis-04.pl:18
#, c-format
msgid ""
"<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
"illustrations."
msgstr ""

#: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13
#, fuzzy, c-format
msgid "<b>Surf The Internet</b>"
msgstr "Internet"

#: share/advertising/dis-05.pl:15
#, c-format
msgid "Discover the new integrated personal information suite KDE Kontact."
msgstr ""

#: share/advertising/dis-05.pl:17
#, c-format
msgid ""
"More than just a full-featured email client, <b>Kontact</b> also includes an "
"address book, a calendar and scheduling program, plus a tool for taking "
"notes!"
msgstr ""

#: share/advertising/dis-06.pl:15
#, c-format
msgid "You can also:"
msgstr ""

#: share/advertising/dis-06.pl:16
#, c-format
msgid "\t- browse the Web"
msgstr ""

#: share/advertising/dis-06.pl:17
#, c-format
msgid "\t- chat"
msgstr ""

#: share/advertising/dis-06.pl:18
#, c-format
msgid "\t- organize a video-conference"
msgstr ""

#: share/advertising/dis-06.pl:19
#, c-format
msgid "\t- create your own Web site"
msgstr ""

#: share/advertising/dis-06.pl:20
#, c-format
msgid "\t- ..."
msgstr ""

#: share/advertising/dis-07.pl:13
#, c-format
msgid "<b>Multimedia</b>: Software for every need!"
msgstr ""

#: share/advertising/dis-07.pl:15
#, c-format
msgid "Listen to audio CDs with <b>KsCD</b>."
msgstr ""

#: share/advertising/dis-07.pl:17
#, c-format
msgid "Listen to music files and watch videos with <b>Totem</b>."
msgstr ""

#: share/advertising/dis-07.pl:19
#, c-format
msgid "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
msgstr ""

#: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13
#: share/advertising/pwp-07.pl:13
#, fuzzy, c-format
msgid "<b>Mandrake Control Center</b>"
msgstr "Mandrake Kontrolni Centar"

#: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15
#: share/advertising/pwp-07.pl:15
#, c-format
msgid ""
"The Mandrake Control Center is an essential collection of Mandrake-specific "
"utilities for simplifying the configuration of your computer."
msgstr ""

#: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17
#: share/advertising/pwp-07.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of handy utilities for "
"easily configuring hardware devices, defining mount points, setting up "
"Network and Internet, adjusting the security level of your computer, and "
"just about everything related to the system."
msgstr ""

#: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13
#: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13
#, fuzzy, c-format
msgid "<b>MandrakeStore</b>"
msgstr "Mandrake Kontrolni Centar"

#: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15
#: share/advertising/pwp-08.pl:15
#, c-format
msgid ""
"Find all MandrakeSoft products and services at <b>MandrakeStore</b> -- our "
"full service e-commerce platform."
msgstr ""

#: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19
#: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17
#, c-format
msgid "Stop by today at <b>www.mandrakestore.com</b>"
msgstr ""

#: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13
#: share/advertising/pwp-09.pl:13
#, fuzzy, c-format
msgid "Become a <b>MandrakeClub</b> member!"
msgstr "Postanite MandrakeExpert"

#: share/advertising/dis-10.pl:15 share/advertising/ppp-10.pl:15
#: share/advertising/pwp-09.pl:15
#, c-format
msgid ""
"Take advantage of valuable benefits, products and services by joining "
"MandrakeClub, such as:"
msgstr ""

#: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16
#: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16
#, fuzzy, c-format
msgid "\t- Full access to commercial applications"
msgstr "pristup alatima za kompajliranje"

#: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17
#: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17
#, c-format
msgid "\t- Special download mirror list exclusively for MandrakeClub Members"
msgstr ""

#: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18
#: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18
#, fuzzy, c-format
msgid "\t- Voting for software to put in Mandrakelinux"
msgstr "Hvala vam što ste izabrali Mandrakelinux 9.2"

#: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19
#: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19
#, c-format
msgid "\t- Special discounts for products and services at MandrakeStore"
msgstr ""

#: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20
#: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19
#: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21
#: share/advertising/pwp-09.pl:20
#, c-format
msgid "\t- Plus much more"
msgstr ""

#: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22
#: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22
#, c-format
msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
msgstr ""

#: share/advertising/dis-11.pl:13
#, fuzzy, c-format
msgid "Do you require assistance?"
msgstr "Imate li još %s interfejsa?"

#: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16
#: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15
#, c-format
msgid "<b>MandrakeExpert</b> is the primary source for technical support."
msgstr ""

#: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18
#: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17
#, c-format
msgid ""
"If you have Linux questions, subscribe to MandrakeExpert at <b>www."
"mandrakeexpert.com</b>"
msgstr ""

#: share/advertising/dwd-01.pl:17
#, c-format
msgid ""
"Mandrakelinux is committed to the Open Source Model and fully respects the "
"General Public License. This new release is the result of collaboration "
"between MandrakeSoft's team of developers and the worldwide community of "
"Mandrakelinux contributors."
msgstr ""

#: share/advertising/dwd-02.pl:13
#, c-format
msgid "<b>Join the Mandrakelinux community!</b>"
msgstr ""

#: share/advertising/dwd-02.pl:15
#, c-format
msgid ""
"If you would like to get involved, please subscribe to the \"Cooker\" "
"mailing list by visiting <b>mandrake-linux.com/cooker</b>"
msgstr ""

#: share/advertising/dwd-02.pl:17
#, c-format
msgid ""
"To learn more about our dynamic community, please visit <b>www.mandrake-"
"linux.com</b>!"
msgstr ""

#: share/advertising/dwd-03.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr ""

#: share/advertising/dwd-03.pl:15
#, c-format
msgid ""
"Mandrakelinux is an Open Source distribution created with thousands of the "
"choicest applications from the Free Software world. Mandrakelinux is one of "
"the most widely used Linux distributions worldwide!"
msgstr ""

#: share/advertising/dwd-03.pl:17
#, c-format
msgid ""
"Mandrakelinux includes the famous graphical desktops KDE and GNOME, plus the "
"latest versions of the most popular Open Source applications."
msgstr ""

#: share/advertising/dwd-04.pl:13
#, c-format
msgid ""
"Mandrakelinux is widely known as the most user-friendly and the easiest to "
"install and easy to use Linux distribution."
msgstr ""

#: share/advertising/dwd-04.pl:15
#, c-format
msgid "Find out about our <b>Personal Solutions</b>:"
msgstr ""

#: share/advertising/dwd-04.pl:16
#, c-format
msgid "\t- Find out Mandrakelinux on a bootable CD with <b>MandrakeMove</b>"
msgstr ""

#: share/advertising/dwd-04.pl:17
#, c-format
msgid ""
"\t- If you use Linux mostly for Office, Internet and Multimedia tasks, "
"<b>Discovery</b> perfectly meets your needs"
msgstr ""

#: share/advertising/dwd-04.pl:18
#, c-format
msgid ""
"\t- If you appreciate the largest selection of software including powerful "
"development tools, <b>PowerPack</b> is for you"
msgstr ""

#: share/advertising/dwd-04.pl:19
#, c-format
msgid ""
"\t- If you require a full-featured Linux solution customized for small to "
"medium-sized networks, choose <b>PowerPack+</b>"
msgstr ""

#: share/advertising/dwd-05.pl:13
#, c-format
msgid "Find out also our <b>Business Solutions</b>!"
msgstr ""

#: share/advertising/dwd-05.pl:15
#, c-format
msgid ""
"<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
"complete \"all-in-one\" solution that includes everything needed to rapidly "
"deploy world-class Linux server applications."
msgstr ""

#: share/advertising/dwd-05.pl:17
#, c-format
msgid ""
"<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
"provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
"high performance security solution."
msgstr ""

#: share/advertising/dwd-05.pl:19
#, c-format
msgid ""
"<b>MandrakeClustering</b>: the power and speed of a Linux cluster combined "
"with the stability and easy-of-use of the world-famous Mandrakelinux "
"distribution. A unique blend for incomparable HPC performance."
msgstr ""

#: share/advertising/dwd-06.pl:15
#, c-format
msgid ""
"Find all MandrakeSoft products at <b>MandrakeStore</b> -- our full service e-"
"commerce platform."
msgstr ""

#: share/advertising/dwd-06.pl:17
#, c-format
msgid ""
"Find out also support incidents if you have any problems, from standard to "
"professional support, from 1 to 50 incidents, take the one which meets "
"perfectly your needs!"
msgstr ""

#: share/advertising/dwd-07.pl:13
#, fuzzy, c-format
msgid "<b>Become a MandrakeClub member!</b>"
msgstr "Postanite MandrakeExpert"

#: share/advertising/dwd-07.pl:15
#, c-format
msgid ""
"Take advantage of valuable benefits, products and services by joining "
"Mandrake Club, such as:"
msgstr ""

#: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13
#: share/advertising/pwp-10.pl:13
#, fuzzy, c-format
msgid "<b>Do you require assistance?</b>"
msgstr "Imate li još %s interfejsa?"

#: share/advertising/dwd-09.pl:16
#, c-format
msgid "<b>Note</b>"
msgstr ""

#: share/advertising/dwd-09.pl:18
#, c-format
msgid "This is the Mandrakelinux <b>Download version</b>."
msgstr ""

#: share/advertising/dwd-09.pl:20
#, c-format
msgid ""
"The free download version does not include commercial software, and "
"therefore may not work with certain modems (such as some ADSL and RTC) and "
"video cards (such as ATI® and NVIDIA®)."
msgstr ""

#: share/advertising/ppp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution and its many applications are the result "
"of collaborative efforts between MandrakeSoft developers and Mandrakelinux "
"contributors throughout the world."
msgstr ""

#: share/advertising/ppp-02.pl:13
#, c-format
msgid "<b>PowerPack+</b>"
msgstr ""

#: share/advertising/ppp-02.pl:15
#, c-format
msgid ""
"PowerPack+ is a full-featured Linux solution for small to medium-sized "
"networks. PowerPack+ increases the value of the standard PowerPack by adding "
"a comprehensive selection of world-class server applications."
msgstr ""

#: share/advertising/ppp-02.pl:17
#, c-format
msgid ""
"It is the only Mandrakelinux product that includes the groupware solution."
msgstr ""

#: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13
#, fuzzy, c-format
msgid "<b>Choose your graphical Desktop environment!</b>"
msgstr "Izaberite ključ za enkripciju fajl sistema"

#: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15
#, c-format
msgid ""
"When you log into your Mandrakelinux system for the first time, you can "
"choose between several popular graphical desktops environments, including: "
"KDE, GNOME, WindowMaker, IceWM, and others."
msgstr ""

#: share/advertising/ppp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all "
"tasks:"
msgstr ""

#: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15
#, c-format
msgid "\t- Create, edit and share office documents with <b>OpenOffice.org</b>"
msgstr ""

#: share/advertising/ppp-04.pl:16
#, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites: <b>Kontact</b> and <b>Evolution</b>"
msgstr ""

#: share/advertising/ppp-04.pl:17
#, c-format
msgid "\t- Browse the Web with <b>Mozilla and Konqueror</b>"
msgstr ""

#: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18
#, c-format
msgid "\t- Participate in online chat with <b>Kopete</b>"
msgstr ""

#: share/advertising/ppp-04.pl:19
#, c-format
msgid ""
"\t- Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
msgstr ""

#: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20
#, c-format
msgid "\t- Edit images and photos with <b>The Gimp</b>"
msgstr ""

#: share/advertising/ppp-05.pl:13
#, c-format
msgid ""
"PowerPack+ includes everything needed for developing and creating your own "
"software, including:"
msgstr ""

#: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16
#, c-format
msgid ""
"\t- <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
"Environment for C++ programming"
msgstr ""

#: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17
#, c-format
msgid "\t- <b>GCC</b>: the GNU Compiler Collection"
msgstr ""

#: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18
#, c-format
msgid "\t- <b>GDB</b>: the GNU Project debugger"
msgstr ""

#: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16
#, c-format
msgid "\t- <b>Emacs</b>: a customizable and real time display editor"
msgstr ""

#: share/advertising/ppp-05.pl:19
#, c-format
msgid ""
"\t- <b>Xemacs</b>: open source text editor and application development system"
msgstr ""

#: share/advertising/ppp-05.pl:20
#, c-format
msgid ""
"\t- <b>Vim</b>: advanced text editor with more features than standard Vi"
msgstr ""

#: share/advertising/ppp-06.pl:13
#, c-format
msgid "<b>Discover the full-featured groupware solution!</b>"
msgstr ""

#: share/advertising/ppp-06.pl:15
#, c-format
msgid "It includes both server and client features for:"
msgstr ""

#: share/advertising/ppp-06.pl:16
#, c-format
msgid "\t- Sending and receiving emails"
msgstr ""

#: share/advertising/ppp-06.pl:17
#, c-format
msgid ""
"\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
"receiving), Task Requests (sending and receiving)"
msgstr ""

#: share/advertising/ppp-06.pl:18
#, c-format
msgid "\t- Address Book (server and client)"
msgstr ""

#: share/advertising/ppp-07.pl:13
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/ppp-07.pl:15
#, c-format
msgid "\t- <b>Samba</b>: File and print services for MS-Windows clients"
msgstr ""

#: share/advertising/ppp-07.pl:16
#, fuzzy, c-format
msgid "\t- <b>Apache</b>: The most widely used Web server"
msgstr "Apache World Wide Web Server"

#: share/advertising/ppp-07.pl:17
#, c-format
msgid "\t- <b>MySQL</b>: The world's most popular Open Source database"
msgstr ""

#: share/advertising/ppp-07.pl:18
#, c-format
msgid ""
"\t- <b>CVS</b>: Concurrent Versions System, the dominant open-source network-"
"transparent version control system"
msgstr ""

#: share/advertising/ppp-07.pl:19
#, c-format
msgid ""
"\t- <b>ProFTPD</b>: the highly configurable GPL-licensed FTP server software"
msgstr ""

#: share/advertising/ppp-07.pl:20
#, c-format
msgid "\t- And others"
msgstr ""

#: share/advertising/pwp-01.pl:17
#, c-format
msgid ""
"Your new Mandrakelinux distribution is the result of collaborative efforts "
"between MandrakeSoft developers and Mandrakelinux contributors throughout "
"the world."
msgstr ""

#: share/advertising/pwp-01.pl:19
#, c-format
msgid ""
"We would like to thank everyone who participated in the development of our "
"latest release."
msgstr ""

#: share/advertising/pwp-02.pl:13
#, c-format
msgid "<b>PowerPack</b>"
msgstr ""

#: share/advertising/pwp-02.pl:15
#, c-format
msgid ""
"PowerPack is MandrakeSoft's premier Linux desktop product. In addition to "
"being the easiest and the most user-friendly Linux distribution, PowerPack "
"includes thousands of applications - everything from the most popular to the "
"most technical."
msgstr ""

#: share/advertising/pwp-04.pl:13
#, c-format
msgid ""
"In the Mandrakelinux menu you will find easy-to-use applications for all of "
"your tasks:"
msgstr ""

#: share/advertising/pwp-04.pl:16
#, c-format
msgid ""
"\t- Take charge of your personal data with the integrated personal "
"information suites <b>Kontact</b> and <b>Evolution</b>"
msgstr ""

#: share/advertising/pwp-04.pl:17
#, c-format
msgid "\t- Browse the Web with <b>Mozilla</b> and <b>Konqueror</b>"
msgstr ""

#: share/advertising/pwp-04.pl:19
#, c-format
msgid "\t- Listen to audio CDs and music files with KsCD and <b>Totem</b>"
msgstr ""

#: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13
#, fuzzy, c-format
msgid "<b>Development tools</b>"
msgstr "Razvojna"

#: share/advertising/pwp-05.pl:15
#, c-format
msgid ""
"PowerPack includes everything needed for developing and creating your own "
"software, including:"
msgstr ""

#: share/advertising/pwp-06.pl:15
#, c-format
msgid "And of course the editors!"
msgstr ""

#: share/advertising/pwp-06.pl:17
#, c-format
msgid ""
"\t- <b>Xemacs</b>: another open source text editor and application "
"development system"
msgstr ""

#: share/advertising/pwp-06.pl:18
#, c-format
msgid ""
"\t- <b>Vim</b>: an advanced text editor with more features than standard Vi"
msgstr ""

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
" Ovaj program je bespaltan; možete ga redistribuirati i/ili menjati\n"
" pod uslovima GNU General Public License kako je objavljeno\n"
" u Free Software Fondaciji; ili verziji 2, ili (u vašem slučaju)\n"
" bilo kojoj novijoj verziji.\n"
"\n"
" Ovaj program je distribuiran u nadi da će biti od koristi,\n"
" sli BEZ IKAKVIH GARANCIJA; čak i bez garancije za\n"
" KORISNOST i PRAKTIČNU UPOTREBU.  Pogledajte\n"
" GNU Opštu Javnu Licencu za više detalja.\n"
"\n"
" Trebali bi da mate kopiju GNU Opšte Javne  Licence\n"
" zajedno sa ovim programom; ukoliko je nemate, pišite nam na adresu Free "
"Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Program za Backup i vraćanje podataka\n"
"\n"
"--default             : snima default direktorijume.\n"
"--debug               : prikazuje sve debug poruke.\n"
"--show-conf           : lista fajlova ili direktorijuma za backup.\n"
"--config-info         : objašnjava podešavanje opcija za fajlove (za ne-X "
"korisnike).\n"
"--daemon              : koristi daemon konfiguraciju. \n"
"--help                : prikazuje ovu poruku.\n"
"--version             : prikazuje verziju programa.\n"

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPCIJE:\n"
"  --help            - prikazuje ovaj tekst koji sada čitate.\n"
"  --report          - program treba da bude jedan od mandrake alata\n"
"  --incident        - program treba da bude jedan od mandrake alata"

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, fuzzy, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"Program za kontrolu i importovanje "
"fontova                                     \n"
"--windows_import : importuje sa svih dostupnih windows particija.\n"
"--xls_fonts      : prikazuje sve fontove koji su već prisutni preko xls\n"
"--strong         : strga provera fonta.\n"
"--install        : instalira bilo koji font i bilo koji direktorijum.\n"
"--uninstall      : deinstalira  bilo koji font ili bilo koji direktorijum sa "
"fontovima.\n"
"--replace        : zamenjuje sve fontove koji već postoje\n"
"--application    : 0 bez aplikacije.\n"
"                 : 1 sve dostupne aplikacije podržane.\n"
"                 : name_of_application kao za na primer staroffice \n"
"                 : i  gs za ghostscript za samo ovu."

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[OPTIONS]...\n"
"Program za podešavanje Mandrake Terminalnog Servera\n"
"--enable         : uključuje MTS\n"
"--disable        : isključuje MTS\n"
"--start          : pokreće MTS\n"
"--stop           : zaustavlja MTS\n"
"--adduser        : dodaje postojećeg sistemskog korisnika u MTS (zahteva "
"korisničko ime)\n"
"--deluser        : briše postojećeg sistemskog korisnika iz MTS (zahteva "
"korisničko ime)\n"
"--addclient      : dodaje klijentsku mašinu na MTS (zahteva MAC adresu, IP, "
"nbi image ime)\n"
"--delclient      : briše klijentsku mašinu iz MTS (zahteva MAC adresu, IP, "
"nbi image ime)"

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[keyboard]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[OPTIONS]\n"
"Mrežna i Internet konekcija i aplikacije za monitoring\n"
"\n"
"--defaultintf interfejs : prikazuje  ovaj interfejst po osnovnoj postavci\n"
"--connect : povezuje se na Internet ukoliko već nije povezan\n"
"--disconnect : prekida vezu sa Internetom ukoliko je već povezan\n"
"--force : koristi se uz dve prethodne opcije : primorava na povezivanje ili "
"prekid.\n"
"--status : prikadzuje 1 ukoliko je povezan ili 0 ako nije, i zatim "
"završava.\n"
"--quiet : bez interaktivnosti. Treba da se koristi sa opcijama za "
"povezivanje i prekid."

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[OPTION]...\n"
"  --no-confirmation      ne postavlja pitanje o potvrdi u MandrakeUpdate "
"modu\n"
"  --no-verify-rpm        ne proverava signature paketa\n"
"  --changelog-first      prikadzuje zapis o izmenama pre liste fajlova u "
"prozoru dza opis\n"
"  --merge-all-rpmnew     predlaže spajanje svih pronađenih .rpmnew/.rpmsave "
"fajlova"

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"

#: standalone.pm:128
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Upotreba: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: standalone/XFdrake:87
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Molim vaš izlogujte se i restartujte (Ctrl-Alt-BackSpace) računar"

#: standalone/XFdrake:91
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:77
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:114 standalone/drakTermServ:121
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:134
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:141
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:153
#, fuzzy, c-format
msgid "You must be root to read configuration file. \n"
msgstr "Backup-uj sada iz konfiguracionog fajla"

#: standalone/drakTermServ:238 standalone/drakTermServ:512
#: standalone/drakfont:575
#, c-format
msgid "OK"
msgstr "OK"

#: standalone/drakTermServ:249 standalone/drakTermServ:252
#, c-format
msgid "Terminal Server Configuration"
msgstr "Konfiguracija Terminalnog servera"

#: standalone/drakTermServ:267
#, c-format
msgid "Enable Server"
msgstr "Aktiviraj Server"

#: standalone/drakTermServ:273
#, c-format
msgid "Disable Server"
msgstr "Deaktiviraj Server"

#: standalone/drakTermServ:281
#, c-format
msgid "Start Server"
msgstr "Pokreni Server"

#: standalone/drakTermServ:287
#, c-format
msgid "Stop Server"
msgstr "Zaustavi Server"

#: standalone/drakTermServ:295
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Etherboot Floppy/ISO"

#: standalone/drakTermServ:299
#, c-format
msgid "Net Boot Images"
msgstr "Net Boot Images"

#: standalone/drakTermServ:305
#, c-format
msgid "Add/Del Users"
msgstr "Dodaj/Izbriši Korisnike"

#: standalone/drakTermServ:309
#, c-format
msgid "Add/Del Clients"
msgstr "Dodaj/Izbriši Klijente"

#: standalone/drakTermServ:320 standalone/drakbug:54
#, c-format
msgid "First Time Wizard"
msgstr "Čarobnjak po prvi put"

#: standalone/drakTermServ:352 standalone/drakTermServ:353
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:359
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup dhcp.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:404
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Kliknite ovde za pokretanje čarobnjaka ->"

#: standalone/drakTermServ:416
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:444
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "Dozvoli Thin Klijente"

#: standalone/drakTermServ:446
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:458 standalone/drakTermServ:1072
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:465
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:466 standalone/drakTermServ:764
#: standalone/drakTermServ:780
#, c-format
msgid "This will take a few minutes."
msgstr "Ovo će potrajati nekoliko minuta."

#: standalone/drakTermServ:470 standalone/drakTermServ:490
#, fuzzy, c-format
msgid "Done!"
msgstr "Urađeno"

#: standalone/drakTermServ:476
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:496
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:531
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Konfiguracija Mandrake Terminalnog servera"

#: standalone/drakTermServ:532
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:538
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:556
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:576
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:588
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:592
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:597
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:606
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:627
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:662
#, c-format
msgid "Boot Floppy"
msgstr "Boot Floppy"

#: standalone/drakTermServ:664
#, c-format
msgid "Boot ISO"
msgstr "Boot ISO"

#: standalone/drakTermServ:666
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Slika"

#: standalone/drakTermServ:735
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "Verzija kernela"

#: standalone/drakTermServ:762
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Kompajliraj celi Kernel -->"

#: standalone/drakTermServ:769
#, c-format
msgid "No kernel selected!"
msgstr "Nijedan kernel nije izabran!"

#: standalone/drakTermServ:772
#, c-format
msgid "Build Single NIC -->"
msgstr "Build Single NIC -->"

#: standalone/drakTermServ:776
#, c-format
msgid "No NIC selected!"
msgstr "Nijedan NIC nije selektovan!"

#: standalone/drakTermServ:779
#, c-format
msgid "Build All Kernels -->"
msgstr "Kompajliraj Sve Kernele -->"

#: standalone/drakTermServ:787
#, c-format
msgid "<-- Delete"
msgstr "<-- Obriši"

#: standalone/drakTermServ:794
#, c-format
msgid "Delete All NBIs"
msgstr "Obriši sve NBIs"

#: standalone/drakTermServ:881
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Ukazuje da je lozinka u sistemskoj bazi podataka različita\n"
"od one u bazi terminalnog Servera.\n"
"Obrišite/ponovo dodajte korisnika na Terminalnom Serveru da bi omoućili "
"prijavljivanje."

#: standalone/drakTermServ:886
#, c-format
msgid "Add User -->"
msgstr "Dodaj Korisnika -->"

#: standalone/drakTermServ:892
#, c-format
msgid "<-- Del User"
msgstr "<-- Obriši Korisnika"

#: standalone/drakTermServ:928
#, c-format
msgid "type: %s"
msgstr "tip: %s"

#: standalone/drakTermServ:932
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:962
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Automatska rekonfiguracija"

#: standalone/drakTermServ:971
#, c-format
msgid "No net boot images created!"
msgstr "Nema kreiranih No net boot image!"

#: standalone/drakTermServ:989
#, c-format
msgid "Thin Client"
msgstr "Thin klijent"

#: standalone/drakTermServ:993
#, c-format
msgid "Allow Thin Clients"
msgstr "Dozvoli Thin Klijente"

#: standalone/drakTermServ:994
#, c-format
msgid "Add Client -->"
msgstr "Dodaj Klijenta -->"

#: standalone/drakTermServ:1008
#, fuzzy, c-format
msgid "type: fat"
msgstr "tip: %s"

#: standalone/drakTermServ:1009
#, fuzzy, c-format
msgid "type: thin"
msgstr "tip: %s"

#: standalone/drakTermServ:1016
#, fuzzy, c-format
msgid "local config: false"
msgstr "Lokalne datoteke"

#: standalone/drakTermServ:1017
#, fuzzy, c-format
msgid "local config: true"
msgstr "nije podešeno"

#: standalone/drakTermServ:1025
#, c-format
msgid "<-- Edit Client"
msgstr "Uredi Klijenta"

#: standalone/drakTermServ:1051
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1058
#, c-format
msgid "Delete Client"
msgstr "Obriši Klijenta"

#: standalone/drakTermServ:1067
#, c-format
msgid "dhcpd Config..."
msgstr "dhcpd Konfiguracija..."

#: standalone/drakTermServ:1083
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Morate da restartujete Menadžera za Dispej da bi sve izmene bile vidljive. \n"
"(service dm restart - u kondzoli)"

#: standalone/drakTermServ:1123
#, c-format
msgid "Thin clients won't work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1139
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1169
#, c-format
msgid "Subnet:"
msgstr "Subnet:"

#: standalone/drakTermServ:1176
#, c-format
msgid "Netmask:"
msgstr "Mrežna maska:"

#: standalone/drakTermServ:1183
#, c-format
msgid "Routers:"
msgstr "Ruteri:"

#: standalone/drakTermServ:1190
#, c-format
msgid "Subnet Mask:"
msgstr "Subnet maska:"

#: standalone/drakTermServ:1197
#, c-format
msgid "Broadcast Address:"
msgstr "Broadcast Adresa:"

#: standalone/drakTermServ:1204
#, c-format
msgid "Domain Name:"
msgstr "Ime domena:"

#: standalone/drakTermServ:1212
#, c-format
msgid "Name Servers:"
msgstr "Navedi servere:"

#: standalone/drakTermServ:1223
#, c-format
msgid "IP Range Start:"
msgstr "Početak IP raspona:"

#: standalone/drakTermServ:1224
#, c-format
msgid "IP Range End:"
msgstr "Kraj IP raspona:"

#: standalone/drakTermServ:1276
#, c-format
msgid "dhcpd Server Configuration"
msgstr "dhcpd Server konfiguracija"

#: standalone/drakTermServ:1277
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Većina ovih vrednosti je izvučena iz\n"
"vašeg dosadašnjeg sistema.\n"
"MOžete ih izmeniti po potrebi."

#: standalone/drakTermServ:1280
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "Dinamička IP adresa Pool:"

#: standalone/drakTermServ:1293
#, c-format
msgid "Write Config"
msgstr "Sačuvaj Konfiguraciju"

#: standalone/drakTermServ:1412
#, c-format
msgid "Please insert floppy disk:"
msgstr "Ubacite disketu:"

#: standalone/drakTermServ:1416
#, c-format
msgid "Couldn't access the floppy!"
msgstr "Ne mogu da pristupim disketi!"

#: standalone/drakTermServ:1418
#, c-format
msgid "Floppy can be removed now"
msgstr "Disketu sada možete da izbacite iz uređaja"

#: standalone/drakTermServ:1421
#, c-format
msgid "No floppy drive available!"
msgstr "Disketa nije pronađena!"

#: standalone/drakTermServ:1426
#, fuzzy, c-format
msgid "PXE image is %s/%s"
msgstr "Etherboot ISO image je %s"

#: standalone/drakTermServ:1428
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "Greška kod unosa u datoteka %s"

#: standalone/drakTermServ:1437
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Etherboot ISO image je %s"

#: standalone/drakTermServ:1439
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Nešto je krenulo naopako! - Da li je mkisofs instaliran?"

#: standalone/drakTermServ:1459
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Prvo morate da kreirate /etc/dhcpd.conf !"

#: standalone/drakTermServ:1620
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1638
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "%s ne odgovara"

#: standalone/drakTermServ:1639
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1641
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1643
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1695
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "Detektovan %s"

#: standalone/drakTermServ:1697 standalone/drakTermServ:1774
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "%s ne odgovara"

#: standalone/drakTermServ:1719 standalone/drakTermServ:1720
#: standalone/drakTermServ:1721
#, c-format
msgid "%s already in use\n"
msgstr ""

#: standalone/drakTermServ:1745
#, fuzzy, c-format
msgid "Can't open %s!"
msgstr "Ne mogu pronađem  %s na %s"

#: standalone/drakTermServ:1802
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow i /etc/hosts.deny je već podešen - nije izmenjen"

#: standalone/drakTermServ:1959
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38
#, c-format
msgid "Error!"
msgstr "Greška!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Ne mogu da pronađem potrebni image fajl `%s'."

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "Autoinstalacioni konfigurator"

#: standalone/drakautoinst:42
#, fuzzy, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""
"Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle "
"iopasna i mora se pažljivo koristiti.\n"
"\n"
"Sa ovom opcijom, moći ćete da ponovite instalaciju koju steizveli na ovom "
"računaru, sa povremenim upitima u cilju izmene određenih vrednosti "
"parametra.\n"
"\n"
"RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada neće biti "
"izvođeno automatskiy, bez obzira šta izabrali tokom instalacije na ovom "
"računaru.\n"
"\n"
"Da li želite da nastavite?"

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "ponovi"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "upustvo"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Podešavanje automatizovanih koraka"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"izaberite za svaki korak da li će biti istovetan i automatizovan iliće biti "
"ručno podešavan"

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "Kreiram auto instalacionu disketu"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Ubacite praznu disketu u uređaj %s"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Kreiram auto instalacionu disketu"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Doborodošli.\n"
"\n"
"Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo"

#: standalone/drakautoinst:252 standalone/drakgw:598 standalone/drakvpn:902
#: standalone/scannerdrake:374
#, c-format
msgid "Congratulations!"
msgstr "Čestitamo !"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketa je uspešno kreirana.\n"
"Sada možete ponoviti vašu instalaciju."

#: standalone/drakautoinst:289
#, c-format
msgid "Auto Install"
msgstr "Autoinstalacija"

#: standalone/drakautoinst:358
#, c-format
msgid "Add an item"
msgstr "Dodaj vrednost"

#: standalone/drakautoinst:365
#, c-format
msgid "Remove the last item"
msgstr "Ukloni zadnju vrednost"

#: standalone/drakbackup:88
#, fuzzy, c-format
msgid "hd"
msgstr "Čad"

#: standalone/drakbackup:88
#, fuzzy, c-format
msgid "tape"
msgstr "Traka"

#: standalone/drakbackup:112
#, fuzzy, c-format
msgid "No devices found"
msgstr "NIje pronađen image"

#: standalone/drakbackup:154
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:155
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"This should be a local user or email addresse that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:163
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:164
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:396
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:400
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:447
#, fuzzy, c-format
msgid "Interval cron not available as non-root"
msgstr "Cron nije dostupan još uvek za non-root"

#: standalone/drakbackup:532 standalone/logdrake:467
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:536 standalone/logdrake:472
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:545
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:547
#, fuzzy, c-format
msgid "Old user list:\n"
msgstr ""
"\n"
"- Korisnički fajlovi:\n"

#: standalone/drakbackup:549
#, fuzzy, c-format
msgid "New user list:\n"
msgstr ""
"\n"
"- Korisnički fajlovi:\n"

#: standalone/drakbackup:594
#, fuzzy, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      DrakBackup Izveštaj \n"
"\n"

#: standalone/drakbackup:595
#, fuzzy, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      DrakBackup Daemon Izveštaj\n"
"\n"
"\n"

#: standalone/drakbackup:601
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    DrakBackup Detalji Izveštaja\n"
"\n"
"\n"

#: standalone/drakbackup:625 standalone/drakbackup:696
#: standalone/drakbackup:752
#, fuzzy, c-format
msgid "Total progress"
msgstr "Ukupan napredak"

#: standalone/drakbackup:678
#, fuzzy, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s postoji, da ga obrišem?\n"
"\n"
"Upozorenje: Ukoliko ste već završili ovaj proces verovatno treba da\n"
"očistite unos sa authorized_keys na serveru."

#: standalone/drakbackup:687
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Generisanje tastera može da potraje par trenutaka."

#: standalone/drakbackup:694
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "GREŠKA: Nije moguće povezivanje %s."

#: standalone/drakbackup:711
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Bez traženja lozinke na %s za port %s"

#: standalone/drakbackup:712
#, c-format
msgid "Bad password on %s"
msgstr "Pogrešna lodzinka na %s"

#: standalone/drakbackup:713
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Odbijen pristup pri transferu %s na %s"

#: standalone/drakbackup:714
#, c-format
msgid "Can't find %s on %s"
msgstr "Ne mogu pronađem  %s na %s"

#: standalone/drakbackup:718
#, c-format
msgid "%s not responding"
msgstr "%s ne odgovara"

#: standalone/drakbackup:722
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Transfer je bio uspešan\n"
"Ako želite da porverite možete se prijaviti na server sa:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"bez traženja lozinke."

#: standalone/drakbackup:766
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "WebDAV udaljeni sajt je već u sync!"

#: standalone/drakbackup:770
#, c-format
msgid "WebDAV transfer failed!"
msgstr "WebDAV transfer nije uspeo!"

#: standalone/drakbackup:791
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "Nema CDR/DVDR u uređaju!"

#: standalone/drakbackup:795
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Ovo izgleda nije medij na koji može da se snima!"

#: standalone/drakbackup:799
#, c-format
msgid "Not erasable media!"
msgstr "Medij nije izbrisiv!"

#: standalone/drakbackup:840
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Brisanje medija može da potraje manje vremena."

#: standalone/drakbackup:898
#, c-format
msgid "Permission problem accessing CD."
msgstr "Problemi sa dozvolama pristupa za CD."

#: standalone/drakbackup:925
#, c-format
msgid "No tape in %s!"
msgstr "Nema trake u %s!"

#: standalone/drakbackup:1025
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:1044 standalone/drakbackup:1077
#, c-format
msgid "Backup system files..."
msgstr "Backup sistemskih fajlova..."

#: standalone/drakbackup:1078 standalone/drakbackup:1119
#, c-format
msgid "Hard Disk Backup files..."
msgstr "backup-ovanje fajlova sa hard diska..."

#: standalone/drakbackup:1118
#, c-format
msgid "Backup User files..."
msgstr "backup-ovanje korsinikovih fajlova"

#: standalone/drakbackup:1153
#, c-format
msgid "Backup Other files..."
msgstr "backup-ovanje ostalih fajlova..."

#: standalone/drakbackup:1154
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Napredak Backup-ovanja hard diska..."

#: standalone/drakbackup:1159
#, c-format
msgid "No changes to backup!"
msgstr "Nema izmena za backup!"

#: standalone/drakbackup:1177 standalone/drakbackup:1201
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko %s:\n"
"\n"

#: standalone/drakbackup:1186
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Problemi sa FTP konekcijom: Nije moguće poslati vaše backup fajlove preko "
"FTP.\n"

#: standalone/drakbackup:1187
#, fuzzy, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""
"Greška tokom slanja fajla preko FTP-a.\n"
" Ispravite vašu FTP konfiguraciju."

#: standalone/drakbackup:1189
#, fuzzy, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""
"lista fajlova poslana preko FTP-a: %s\n"
" "

#: standalone/drakbackup:1206
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko CD:\n"
"\n"

#: standalone/drakbackup:1211
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko trake:\n"
"\n"

#: standalone/drakbackup:1220
#, fuzzy, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""
"Greška pri slanju mail-a\n"
"  vaš izveštaj nije poslan\n"
"  Podesite sendmail"

#: standalone/drakbackup:1221
#, c-format
msgid " Error while sending mail. \n"
msgstr " Greška tokom slanja mail-a. \n"

#: standalone/drakbackup:1249
#, c-format
msgid "Can't create catalog!"
msgstr "Ne mogu da kreiram katalog!"

#: standalone/drakbackup:1455
#, fuzzy, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Odaberite fajlove ili direktorijume i klinite na 'Dodaj'"

#: standalone/drakbackup:1484
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Proverite sve opcije koje vam trebaju.\n"

#: standalone/drakbackup:1485
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Ove opcije mogu sačuvati i kasnije obnoviti sve fajlove u vašem /etc "
"direktorijumu.\n"

#: standalone/drakbackup:1486
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Sačuvajte svoje Sistemske fajlove ( /etc direktorijum )"

#: standalone/drakbackup:1487 standalone/drakbackup:1551
#: standalone/drakbackup:1617
#, fuzzy, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""
"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"

#: standalone/drakbackup:1489 standalone/drakbackup:1553
#: standalone/drakbackup:1619
#, fuzzy, c-format
msgid "Use Incremental Backups"
msgstr ""
"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"

#: standalone/drakbackup:1489 standalone/drakbackup:1553
#: standalone/drakbackup:1619
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1491
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Ne uključuj kritične fajlove (passwd, group, fstab)"

#: standalone/drakbackup:1492
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"Sa ovom opcijom moći ćete da obnovite bilo koju verziju\n"
" vašeg /etc direktorijuma."

#: standalone/drakbackup:1523
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Selektujte sve korisnike koje želite da uključite u backup."

#: standalone/drakbackup:1550
#, c-format
msgid "Do not include the browser cache"
msgstr "Ne uključuj keš pretraživača"

#: standalone/drakbackup:1605 standalone/drakfont:656
#, c-format
msgid "Remove Selected"
msgstr "Ukloni Selektovano"

#: standalone/drakbackup:1668
#, c-format
msgid "Users"
msgstr "Korisnici"

#: standalone/drakbackup:1688
#, c-format
msgid "Use network connection to backup"
msgstr "Korisiti mrežnu konekciju za backup"

#: standalone/drakbackup:1690
#, c-format
msgid "Net Method:"
msgstr "Mrežni metod:"

#: standalone/drakbackup:1694
#, c-format
msgid "Use Expect for SSH"
msgstr "Koristi Expect za SSH"

#: standalone/drakbackup:1695
#, fuzzy, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""
"Kreiraj/Prebaci\n"
"backup tastere na SSH"

#: standalone/drakbackup:1697
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
"  Prebaci  \n"
"Sada"

#: standalone/drakbackup:1699
#, fuzzy, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""
"Drugi (ne drakbackup)\n"
"tasteri su već na mestu"

#: standalone/drakbackup:1702
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "Ime hosta:"

#: standalone/drakbackup:1707
#, fuzzy, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""
"Unesite direktorijum (ili modul) da\n"
" bi postavili backup na ovaj host."

#: standalone/drakbackup:1712
#, fuzzy, c-format
msgid "Login name"
msgstr "Ime domena"

#: standalone/drakbackup:1719
#, c-format
msgid "Remember this password"
msgstr "Zapamti ovu lozinku"

#: standalone/drakbackup:1735
#, c-format
msgid "Need hostname, username and password!"
msgstr "Potrebno je ime hosta, korisničko ime i lozinka!"

#: standalone/drakbackup:1833
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Koristi CD/DVDROM za backup"

#: standalone/drakbackup:1836
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "Izaberite veličinu vašeg CD/DVD medija (Mb)"

#: standalone/drakbackup:1841
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "Izaberite veličinu vašeg CD/DVD medija (Mb)"

#: standalone/drakbackup:1848
#, fuzzy, c-format
msgid "Multisession CD"
msgstr " (multi-sesija)"

#: standalone/drakbackup:1850
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1856
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Proverite da li želite izbrišete vaš RW medij (1 sesiju)"

#: standalone/drakbackup:1857
#, c-format
msgid " Erase Now "
msgstr "Obriši odmah "

#: standalone/drakbackup:1863
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1865
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "uređaj"

#: standalone/drakbackup:1867
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "uređaj"

#: standalone/drakbackup:1898
#, c-format
msgid "No CD device defined!"
msgstr "Nije određen CD uređaj!"

#: standalone/drakbackup:1945
#, c-format
msgid "Use tape to backup"
msgstr "Koristi traku za backup"

#: standalone/drakbackup:1948
#, fuzzy, c-format
msgid "Device name to use for backup"
msgstr "Unesite ime uređaja koji koristite za backup"

#: standalone/drakbackup:1954
#, fuzzy, c-format
msgid "Don't rewind tape after backup"
msgstr "Koristi traku za backup"

#: standalone/drakbackup:1960
#, fuzzy, c-format
msgid "Erase tape before backup"
msgstr "Koristi traku za backup"

#: standalone/drakbackup:1966
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "Koristi traku za backup"

#: standalone/drakbackup:2033
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "Unesite direktorijum da bi u njega sačuvali:"

#: standalone/drakbackup:2037
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "Unesite direktorijum da bi u njega sačuvali:"

#: standalone/drakbackup:2042
#, fuzzy, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Unesite maksimalnu veličinu\n"
" dozvoljenu za Drakbackup"

#: standalone/drakbackup:2106
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2111
#, c-format
msgid "HardDrive / NFS"
msgstr "HardDrive / NFS"

#: standalone/drakbackup:2127 standalone/drakbackup:2132
#: standalone/drakbackup:2137
#, c-format
msgid "hourly"
msgstr "na sat"

#: standalone/drakbackup:2128 standalone/drakbackup:2133
#: standalone/drakbackup:2137
#, c-format
msgid "daily"
msgstr "dnevno"

#: standalone/drakbackup:2129 standalone/drakbackup:2134
#: standalone/drakbackup:2137
#, c-format
msgid "weekly"
msgstr "nedeljno"

#: standalone/drakbackup:2130 standalone/drakbackup:2135
#: standalone/drakbackup:2137
#, c-format
msgid "monthly"
msgstr "mesečno"

#: standalone/drakbackup:2131 standalone/drakbackup:2136
#: standalone/drakbackup:2137
#, fuzzy, c-format
msgid "custom"
msgstr "Izbor po želji"

#: standalone/drakbackup:2142
#, c-format
msgid "January"
msgstr "Januar"

#: standalone/drakbackup:2142
#, c-format
msgid "February"
msgstr "Februar"

#: standalone/drakbackup:2142
#, c-format
msgid "March"
msgstr "Mart"

#: standalone/drakbackup:2143
#, c-format
msgid "April"
msgstr "April"

#: standalone/drakbackup:2143
#, c-format
msgid "May"
msgstr "Maj"

#: standalone/drakbackup:2143
#, c-format
msgid "June"
msgstr "Jun"

#: standalone/drakbackup:2143
#, c-format
msgid "July"
msgstr "Jul"

#: standalone/drakbackup:2143
#, c-format
msgid "August"
msgstr "Avgust"

#: standalone/drakbackup:2143
#, c-format
msgid "September"
msgstr "Septembar"

#: standalone/drakbackup:2144
#, c-format
msgid "October"
msgstr "Oktobar"

#: standalone/drakbackup:2144
#, c-format
msgid "November"
msgstr "Novembar"

#: standalone/drakbackup:2144
#, c-format
msgid "December"
msgstr "Decembar"

#: standalone/drakbackup:2149
#, c-format
msgid "Sunday"
msgstr "Nedelja"

#: standalone/drakbackup:2149
#, c-format
msgid "Monday"
msgstr "Ponedeljak"

#: standalone/drakbackup:2149
#, c-format
msgid "Tuesday"
msgstr "Utorak"

#: standalone/drakbackup:2150
#, c-format
msgid "Wednesday"
msgstr "Sreda"

#: standalone/drakbackup:2150
#, c-format
msgid "Thursday"
msgstr "Četvrtak"

#: standalone/drakbackup:2150
#, c-format
msgid "Friday"
msgstr "Petak"

#: standalone/drakbackup:2150
#, c-format
msgid "Saturday"
msgstr "Subota"

#: standalone/drakbackup:2185
#, c-format
msgid "Use daemon"
msgstr "Koristi demon"

#: standalone/drakbackup:2190
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr ""
"Izaberite vremenski interval \n"
"između svakog backup-a"

#: standalone/drakbackup:2196
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2201
#, c-format
msgid "Minute"
msgstr "Minut"

#: standalone/drakbackup:2205
#, c-format
msgid "Hour"
msgstr "Čas"

#: standalone/drakbackup:2209
#, c-format
msgid "Day"
msgstr "Dan"

#: standalone/drakbackup:2213
#, c-format
msgid "Month"
msgstr "Mesec"

#: standalone/drakbackup:2217
#, fuzzy, c-format
msgid "Weekday"
msgstr "Sreda"

#: standalone/drakbackup:2223
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr ""
"Izaberite\n"
"medij za backup."

#: standalone/drakbackup:2230
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""
"Proverite da li je cron demon uključen u vaše servise. \n"
"\n"
"Možete primetiti da svi 'net' mediji takođe koriste hard disk."

#: standalone/drakbackup:2231
#, fuzzy, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""
"Proverite da li je cron demon uključen u vaše servise. \n"
"\n"
"Možete primetiti da svi 'net' mediji takođe koriste hard disk."

#: standalone/drakbackup:2281
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "izaberite datum za obnavljanje"

#: standalone/drakbackup:2285
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "Koristi quota zar backup fajlove"

#: standalone/drakbackup:2287
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Pošalji mail izveštaj nakon svakog backup/a na :"

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "SMB server  host:"

#: standalone/drakbackup:2298
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "Obrišite tar fajove na tvrdom disku nakon backup-a na drugi medij."

#: standalone/drakbackup:2338
#, c-format
msgid "What"
msgstr "Šta"

#: standalone/drakbackup:2343
#, c-format
msgid "Where"
msgstr "Gde"

#: standalone/drakbackup:2348
#, c-format
msgid "When"
msgstr "Kada"

#: standalone/drakbackup:2353
#, c-format
msgid "More Options"
msgstr "Više Opcija"

#: standalone/drakbackup:2366
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "Mrežna funkcionalnost nije podešena"

#: standalone/drakbackup:2385 standalone/drakbackup:4413
#, c-format
msgid "Drakbackup Configuration"
msgstr "Drakbackup Konfiguracija"

#: standalone/drakbackup:2402
#, c-format
msgid "Please choose where you want to backup"
msgstr "Izaberite šta želite da backup-ujete"

#: standalone/drakbackup:2404
#, fuzzy, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr "Obrišite tar fajove na tvrdom disku nakon backup-a na drugi medij."

#: standalone/drakbackup:2412
#, c-format
msgid "Across Network"
msgstr "preko Mreže"

#: standalone/drakbackup:2420
#, c-format
msgid "On CD-R"
msgstr "na CD uređaju"

#: standalone/drakbackup:2428
#, c-format
msgid "On Tape Device"
msgstr "na uređaju za trake"

#: standalone/drakbackup:2468
#, c-format
msgid "Backup Users"
msgstr "Backup-uj Korisnike"

#: standalone/drakbackup:2469
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "Default štampač"

#: standalone/drakbackup:2481
#, c-format
msgid "Please choose what you want to backup"
msgstr "Izaberite šta želite da backup-ujete"

#: standalone/drakbackup:2482
#, c-format
msgid "Backup System"
msgstr "Backup-uj sistem"

#: standalone/drakbackup:2484
#, c-format
msgid "Select user manually"
msgstr "Izaberite korisnike ručno"

#: standalone/drakbackup:2513
#, c-format
msgid "Please select data to backup..."
msgstr "Izaberite podatke koji želite da backup-ujete..."

#: standalone/drakbackup:2585
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Backup Izvori: \n"

#: standalone/drakbackup:2586
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Sistemski fajlovi:\n"

#: standalone/drakbackup:2588
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Korisnički fajlovi:\n"

#: standalone/drakbackup:2590
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Ostali fajlovi:\n"

#: standalone/drakbackup:2592
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Snimi na Hard Disk na putanju: %s\n"

#: standalone/drakbackup:2593
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2596
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Obrišite tar fajlove na hard disku posle backup-a.\n"

#: standalone/drakbackup:2600
#, fuzzy, c-format
msgid "NO"
msgstr "INFO"

#: standalone/drakbackup:2601
#, c-format
msgid "YES"
msgstr ""

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Nareži na CD"

#: standalone/drakbackup:2603
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2604
#, c-format
msgid " on device: %s"
msgstr " na uređaj: %s"

#: standalone/drakbackup:2605
#, c-format
msgid " (multi-session)"
msgstr " (multi-sesija)"

#: standalone/drakbackup:2606
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Snimi na traku na uređaju: %s"

#: standalone/drakbackup:2607
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tErase=%s"

#: standalone/drakbackup:2610
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Snimi preko %s na host: %s\n"

#: standalone/drakbackup:2611
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t korisničko ime: %s\n"
"\t\t na putanji: %s \n"

#: standalone/drakbackup:2612
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Opcije:\n"

#: standalone/drakbackup:2613
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tNe uključuj Sistemske Fajlove\n"

#: standalone/drakbackup:2615
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tBackup koristi tar i bzip2\n"

#: standalone/drakbackup:2616
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tBackus koristi tar i gzip\n"

#: standalone/drakbackup:2617
#, fuzzy, c-format
msgid "\tBackups use tar only\n"
msgstr "\tBackus koristi tar i gzip\n"

#: standalone/drakbackup:2619
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "Koristi quota zar backup fajlove"

#: standalone/drakbackup:2620
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2621
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "Na CUPS server \"%s\""

#: standalone/drakbackup:2623
#, fuzzy, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Demonn (%s) uključuje :\n"

#: standalone/drakbackup:2624
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Hard disk.\n"

#: standalone/drakbackup:2625
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: standalone/drakbackup:2626
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Traka \n"

#: standalone/drakbackup:2627
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Mreža preko FTP.\n"

#: standalone/drakbackup:2628
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Mreža preko SSH.\n"

#: standalone/drakbackup:2629
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Mreža preko rsync.\n"

#: standalone/drakbackup:2630
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Mreža preko webdav.\n"

#: standalone/drakbackup:2632
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Bez konfiguracije, kliknite na Čarobnjak ili Napredno\n"

#: standalone/drakbackup:2637
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Lista podataka za obnavljanje:\n"
"\n"

#: standalone/drakbackup:2639
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr ""
"\n"
"- Sistemski fajlovi:\n"

#: standalone/drakbackup:2641 standalone/drakbackup:2651
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2644
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr ""
"\n"
"- Korisnički fajlovi:\n"

#: standalone/drakbackup:2649
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr ""
"\n"
"- Ostali fajlovi:\n"

#: standalone/drakbackup:2830
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Lista korumpiranih podataka:\n"
"\n"

#: standalone/drakbackup:2832
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Deselektujte ili uklonite ih sledeći put."

#: standalone/drakbackup:2842
#, c-format
msgid "Backup files are corrupted"
msgstr "Backup fajlovi su korumpirani"

#: standalone/drakbackup:2863
#, c-format
msgid "          All of your selected data have been          "
msgstr "          Svi vaši odabrani podasi su          "

#: standalone/drakbackup:2864
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Uspešno Obnovljeni na %s       "

#: standalone/drakbackup:2987
#, c-format
msgid "         Restore Configuration       "
msgstr "        Obnavljanje Konfiguracije         "

#: standalone/drakbackup:3015
#, c-format
msgid "OK to restore the other files."
msgstr "U Redu za obnavanje drugih fajlova."

#: standalone/drakbackup:3031
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su važni)"

#: standalone/drakbackup:3098
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "izaberite datum za obnavljanje"

#: standalone/drakbackup:3135
#, c-format
msgid "Restore from Hard Disk."
msgstr "Povrati (restore) sa Hard Diska"

#: standalone/drakbackup:3137
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "Unesite direktorijum gde je smešten backup"

#: standalone/drakbackup:3141
#, fuzzy, c-format
msgid "Directory with backups"
msgstr "Obnovi sve backup-ove"

#: standalone/drakbackup:3194
#, c-format
msgid "Select another media to restore from"
msgstr "Izaberitedrugi medij za obnavljanje sa"

#: standalone/drakbackup:3196
#, c-format
msgid "Other Media"
msgstr "Drugi Medij"

#: standalone/drakbackup:3201
#, c-format
msgid "Restore system"
msgstr "Obnovi sistem"

#: standalone/drakbackup:3202
#, c-format
msgid "Restore Users"
msgstr "Obnovi korisnike"

#: standalone/drakbackup:3203
#, c-format
msgid "Restore Other"
msgstr "Obnovi ostalo"

#: standalone/drakbackup:3205
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "izaberite putanju za obnavljanje (umesto /)"

#: standalone/drakbackup:3209 standalone/drakbackup:3490
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "Obnavljanje po želji"

#: standalone/drakbackup:3212
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)"

#: standalone/drakbackup:3214
#, c-format
msgid "Remove user directories before restore."
msgstr "Ukloni korisničke direktorijume pre obnavljanja"

#: standalone/drakbackup:3298
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3301
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3320
#, fuzzy, c-format
msgid "No matches found..."
msgstr "NIje pronađen image"

#: standalone/drakbackup:3324
#, fuzzy, c-format
msgid "Restore Selected"
msgstr ""
"Obnovi odabrane\n"
"fajlove"

#: standalone/drakbackup:3458
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3464
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Obnovi izabrane\n"
"Unose u katalogu"

#: standalone/drakbackup:3473
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Obnovi odabrane\n"
"fajlove"

#: standalone/drakbackup:3550
#, c-format
msgid "Backup files not found at %s."
msgstr "Backup fajlvi nisu pronađeni na %s."

#: standalone/drakbackup:3563
#, c-format
msgid "Restore From CD"
msgstr "Obnovi sa CDa"

#: standalone/drakbackup:3563
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Ubacite CD sa oznakom  %s\n"
" u CD uređaj sa tačkom montiranja /mnt/cdrom"

#: standalone/drakbackup:3565
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "NIje ipstavna oznaka CDa. Disk je označen sa %s."

#: standalone/drakbackup:3575
#, c-format
msgid "Restore From Tape"
msgstr "Obnovi sa trake"

#: standalone/drakbackup:3575
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Ubacite traku za oznakom %s\n"
" u uređaj za trake %s"

#: standalone/drakbackup:3577
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "NIje dobra oznaka trake. Traka je označena sa %s."

#: standalone/drakbackup:3588
#, c-format
msgid "Restore Via Network"
msgstr "Obnovi preko Mreže"

#: standalone/drakbackup:3588
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Oblnovi preko Mrežnog protokola: %s"

#: standalone/drakbackup:3589
#, c-format
msgid "Host Name"
msgstr "Ime hosta"

#: standalone/drakbackup:3590
#, c-format
msgid "Host Path or Module"
msgstr "Putanja do hosta ili Modul"

#: standalone/drakbackup:3597
#, c-format
msgid "Password required"
msgstr "Potrebna je Lozinka"

#: standalone/drakbackup:3603
#, c-format
msgid "Username required"
msgstr "Potrebno je Korisničko ime"

#: standalone/drakbackup:3606
#, c-format
msgid "Hostname required"
msgstr "Potrebno je ime hosta"

#: standalone/drakbackup:3611
#, c-format
msgid "Path or Module required"
msgstr "Potrebna je putanja ili modul"

#: standalone/drakbackup:3624
#, c-format
msgid "Files Restored..."
msgstr "Fajlovi obnovljeni..."

#: standalone/drakbackup:3627
#, c-format
msgid "Restore Failed..."
msgstr "Obnova neuspela..."

#: standalone/drakbackup:3737 standalone/drakbackup:3754
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "%s ne odgovara"

#: standalone/drakbackup:3880 standalone/drakbackup:3953
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "Izaberitedrugi medij za obnavljanje sa"

#: standalone/drakbackup:3885
#, c-format
msgid "Restore all backups"
msgstr "Obnovi sve backup-ove"

#: standalone/drakbackup:3894
#, c-format
msgid "Custom Restore"
msgstr "Obnavljanje po želji"

#: standalone/drakbackup:3899 standalone/drakbackup:3949
#, c-format
msgid "Restore From Catalog"
msgstr "Obnovi iz Kataloga"

#: standalone/drakbackup:3921
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Izaberite podatke za obnavljanje..."

#: standalone/drakbackup:3922
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "Da li je ovo ispravno podešeno?"

#: standalone/drakbackup:3923
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3925
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3941
#, c-format
msgid "CD in place - continue."
msgstr "CD na mestu - nastavi."

#: standalone/drakbackup:3946
#, c-format
msgid "Browse to new restore repository."
msgstr "Pretražite novi restore repository."

#: standalone/drakbackup:3947
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "Obnovi sa CDa"

#: standalone/drakbackup:3986
#, c-format
msgid "Restore Progress"
msgstr "Obnovi stanje napredovanja"

#: standalone/drakbackup:4016 standalone/drakbackup:4123
#: standalone/logdrake:174
#, c-format
msgid "Save"
msgstr "Sačuvaj"

#: standalone/drakbackup:4099
#, c-format
msgid "Build Backup"
msgstr "Kreiraj backup"

#: standalone/drakbackup:4147 standalone/drakbackup:4512
#, c-format
msgid "Restore"
msgstr "Obnovi"

#: standalone/drakbackup:4277
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Sledeći paketi treba da budu instalirani:\n"

#: standalone/drakbackup:4304
#, c-format
msgid "Please select data to restore..."
msgstr "Izaberite podatke za obnavljanje..."

#: standalone/drakbackup:4344
#, c-format
msgid "Backup system files"
msgstr "Backup-uj sistemske fajlove"

#: standalone/drakbackup:4347
#, c-format
msgid "Backup user files"
msgstr "Backup-uj korisničke fajlove"

#: standalone/drakbackup:4350
#, c-format
msgid "Backup other files"
msgstr "Backup-uj ostale fajlove"

#: standalone/drakbackup:4353 standalone/drakbackup:4389
#, c-format
msgid "Total Progress"
msgstr "Ukupni napredak"

#: standalone/drakbackup:4381
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "Šaljem fajlove..."

#: standalone/drakbackup:4384
#, c-format
msgid "Sending files..."
msgstr "Šaljem fajlove..."

#: standalone/drakbackup:4455
#, c-format
msgid "Backup Now from configuration file"
msgstr "Backup-uj sada iz konfiguracionog fajla"

#: standalone/drakbackup:4460
#, c-format
msgid "View Backup Configuration."
msgstr "Pogledaj Backup Konfiguraciju."

#: standalone/drakbackup:4486
#, c-format
msgid "Wizard Configuration"
msgstr "Čarobnjak Konfiguracija"

#: standalone/drakbackup:4491
#, c-format
msgid "Advanced Configuration"
msgstr "Napredna Konfiguracija"

#: standalone/drakbackup:4496
#, fuzzy, c-format
msgid "View Configuration"
msgstr "Konfiguracija"

#: standalone/drakbackup:4500
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4505
#, c-format
msgid "Backup Now"
msgstr "Backup Sad"

#: standalone/drakbackup:4509
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Nije pronađen kofiguracioni fajl \n"
"Kliknite na Čarobnjak ili Napredno."

#: standalone/drakbackup:4530 standalone/drakbackup:4533
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:58
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "Selekcija modela štampača"

#: standalone/drakboot:58
#, c-format
msgid "System mode"
msgstr "Sistemski mod"

#: standalone/drakboot:68 standalone/drakfloppy:46 standalone/harddrake2:97
#: standalone/harddrake2:98 standalone/logdrake:71 standalone/printerdrake:150
#: standalone/printerdrake:151 standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_Fajl"

#: standalone/drakboot:69 standalone/drakfloppy:47 standalone/logdrake:77
#, c-format
msgid "/File/_Quit"
msgstr "/Fajl/_Kraj"

#: standalone/drakboot:69 standalone/drakfloppy:47 standalone/harddrake2:98
#: standalone/logdrake:77 standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:139
#, c-format
msgid "Install themes"
msgstr "Instaliraj teme"

#: standalone/drakboot:140
#, c-format
msgid "Create new theme"
msgstr "Kreiraj novu temu"

#: standalone/drakboot:152
#, c-format
msgid "Use graphical boot"
msgstr ""

#: standalone/drakboot:157
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:164
#, fuzzy, c-format
msgid "Theme"
msgstr "Teme"

#: standalone/drakboot:167
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Prikaži teme\n"
"u konzoli"

#: standalone/drakboot:176
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Pokreni X-Window sistem pri stratanju"

#: standalone/drakboot:184
#, c-format
msgid "No, I don't want autologin"
msgstr "Ne, ja ne želim autologovanje"

#: standalone/drakboot:185
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Da, ja želim autologovanje sa ovim(korisnik,desktop)"

#: standalone/drakboot:191
#, fuzzy, c-format
msgid "Default user"
msgstr "Default štampač"

#: standalone/drakboot:192
#, fuzzy, c-format
msgid "Default desktop"
msgstr "Podrazumevano"

#: standalone/drakboot:256
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Instalacija %s-a neuspela. Greška je:"

#: standalone/drakbug:40
#, c-format
msgid ""
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""
"Da bi prijavili bag, kliknite na taster prijava.\n"
"Ovo će otvoriti prozor web pretraživača sa adresom %s\n"
" gde će te pronaći formular koji treba da popunite.Informacija koja je gore "
"prokazana će biti \n"
"prebačena na taj server."

#: standalone/drakbug:48
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Mandrake Program za Prijavljivanje Grešaka"

#: standalone/drakbug:53
#, c-format
msgid "Mandrake Control Center"
msgstr "Mandrake Kontrolni Centar"

#: standalone/drakbug:55
#, c-format
msgid "Synchronization tool"
msgstr "Alat za sinhronizaciju"

#: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204
#: standalone/drakbug:206 standalone/drakbug:210
#, c-format
msgid "Standalone Tools"
msgstr "Samostalni Alati"

#: standalone/drakbug:57
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:58
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: standalone/drakbug:59
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:60
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:61
#, c-format
msgid "Remote Control"
msgstr "Udaljena kontrola"

#: standalone/drakbug:62
#, c-format
msgid "Software Manager"
msgstr "Menadžer Softvera"

#: standalone/drakbug:63
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:64
#, c-format
msgid "Windows Migration tool"
msgstr "Alat za prelazak za Windows-a"

#: standalone/drakbug:65
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:66
#, c-format
msgid "Configuration Wizards"
msgstr "Čarobnjaci za konfiguraciju"

#: standalone/drakbug:84
#, fuzzy, c-format
msgid ""
"To submit a bug report, click the report button, which will open your "
"default browser\n"
"to Anthill where you will be able to upload the above information as a bug "
"report."
msgstr ""
"Da bi prijavili bag, kliknite na taster prijava.\n"
"Ovo će otvoriti prozor web pretraživača sa adresom %s\n"
" gde će te pronaći formular koji treba da popunite.Informacija koja je gore "
"prokazana će biti \n"
"prebačena na taj server."

#: standalone/drakbug:102
#, c-format
msgid "Application:"
msgstr "Aplikacija:"

#: standalone/drakbug:103 standalone/drakbug:115
#, c-format
msgid "Package: "
msgstr "Paket: "

#: standalone/drakbug:104
#, c-format
msgid "Kernel:"
msgstr "Kernel:"

#: standalone/drakbug:105 standalone/drakbug:116
#, c-format
msgid "Release: "
msgstr "Verzija: "

#: standalone/drakbug:110
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""

#: standalone/drakbug:113
#, fuzzy, c-format
msgid "Find Package"
msgstr "%d paketa"

#: standalone/drakbug:117
#, fuzzy, c-format
msgid "Summary: "
msgstr "Sažetak"

#: standalone/drakbug:129
#, c-format
msgid "YOUR TEXT HERE"
msgstr ""

#: standalone/drakbug:132
#, c-format
msgid "Bug Description/System Information"
msgstr ""

#: standalone/drakbug:136
#, fuzzy, c-format
msgid "Submit kernel version"
msgstr "Verzija kernela"

#: standalone/drakbug:137
#, c-format
msgid "Submit cpuinfo"
msgstr ""

#: standalone/drakbug:138
#, c-format
msgid "Submit lspci"
msgstr ""

#: standalone/drakbug:159
#, c-format
msgid "Report"
msgstr "Prijava"

#: standalone/drakbug:219
#, c-format
msgid "Not installed"
msgstr "Nije instalirano"

#: standalone/drakbug:231
#, c-format
msgid "Package not installed"
msgstr "Paket nije instaliran"

#: standalone/drakbug:248
#, c-format
msgid "NOT FOUND"
msgstr ""

#: standalone/drakbug:259
#, fuzzy, c-format
msgid "connecting to %s ..."
msgstr "konektujem se na Bugzilla čarobnjak ..."

#: standalone/drakbug:267
#, c-format
msgid "No browser available! Please install one"
msgstr "Nema dostupnog pretraživača! Molim Vas da instalirate barem jednog"

#: standalone/drakbug:286
#, fuzzy, c-format
msgid "Please enter a package name."
msgstr "Odredite korisničko ime"

#: standalone/drakbug:292
#, fuzzy, c-format
msgid "Please enter summary text."
msgstr "Unesite vaše korisničko ime"

#: standalone/drakclock:29
#, fuzzy, c-format
msgid "DrakClock"
msgstr "Drakbackup"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "nije podešeno"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "Vremenska zona"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "Vremenska zona - Drak Časovnik"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - Drak Časovnik"

#: standalone/drakclock:47
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Vaš sistemski (BIOS) časovnik je podešen na GMT"

#: standalone/drakclock:79
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Mrežni interfejs"

#: standalone/drakclock:81
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:82
#, fuzzy, c-format
msgid "Enable Network Time Protocol"
msgstr "Oblnovi preko Mrežnog protokola: %s"

#: standalone/drakclock:90
#, fuzzy, c-format
msgid "Server:"
msgstr "Server:"

#: standalone/drakclock:137 standalone/drakclock:149
#, fuzzy, c-format
msgid "Reset"
msgstr "Odbaci"

#: standalone/drakclock:212
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp ?"
msgstr ""

#: standalone/drakconnect:81
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Podešavanje mreže (%d adaptera)"

#: standalone/drakconnect:92 standalone/drakconnect:738
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: standalone/drakconnect:92 standalone/drakconnect:738
#, c-format
msgid "Interface:"
msgstr "Interfejs:"

#: standalone/drakconnect:96 standalone/net_monitor:105
#, c-format
msgid "Wait please"
msgstr "Molim Vas sačekajte"

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "Interfejs"

#: standalone/drakconnect:116 standalone/drakups:233
#, c-format
msgid "Driver"
msgstr "Drajver"

#: standalone/drakconnect:116
#, c-format
msgid "State"
msgstr "Stanje"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr "Ime hosta:"

#: standalone/drakconnect:135
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "Podešavanje miša"

#: standalone/drakconnect:149 standalone/drakconnect:779
#, c-format
msgid "LAN configuration"
msgstr "LAN konfiguracija"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "Podesi lokalni mrežu..."

#: standalone/drakconnect:162 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Promeni"

#: standalone/drakconnect:197
#, fuzzy, c-format
msgid "Manage connections"
msgstr "Kablovska konekcija"

#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:298
#: standalone/drakconnect:308 standalone/drakconnect:309
#: standalone/drakconnect:576
#, c-format
msgid "TCP/IP"
msgstr ""

#: standalone/drakconnect:263 standalone/drakconnect:272
#: standalone/drakconnect:292 standalone/drakconnect:444
#: standalone/drakconnect:448 standalone/drakconnect:576
#, fuzzy, c-format
msgid "Account"
msgstr "O"

#: standalone/drakconnect:298 standalone/drakconnect:370
#: standalone/drakconnect:371 standalone/drakconnect:576
#, c-format
msgid "Wireless"
msgstr ""

#: standalone/drakconnect:344
#, fuzzy, c-format
msgid "DNS servers"
msgstr "DNS server"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "Search Domain"
msgstr "NIS Domen"

#: standalone/drakconnect:359
#, fuzzy, c-format
msgid "static"
msgstr "Automatski IP"

#: standalone/drakconnect:359
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:482
#, fuzzy, c-format
msgid "Flow control"
msgstr "<control>S"

#: standalone/drakconnect:483
#, fuzzy, c-format
msgid "Line termination"
msgstr "Internet stanica"

#: standalone/drakconnect:493
#, fuzzy, c-format
msgid "Use lock file"
msgstr "Izaberite datoteku"

#: standalone/drakconnect:496
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Pauza pri startanju kernela"

#: standalone/drakconnect:500
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:503
#, fuzzy, c-format
msgid "Busy wait"
msgstr "Kuvajt"

#: standalone/drakconnect:507
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Modem"

#: standalone/drakconnect:508
#, fuzzy, c-format
msgid "Enable"
msgstr "omogući"

#: standalone/drakconnect:508
#, fuzzy, c-format
msgid "Disable"
msgstr "onemogući"

#: standalone/drakconnect:558 standalone/harddrake2:58
#, c-format
msgid "Media class"
msgstr "Klasa Medija"

#: standalone/drakconnect:559 standalone/drakfloppy:140
#, c-format
msgid "Module name"
msgstr "Ime modula"

#: standalone/drakconnect:560
#, fuzzy, c-format
msgid "Mac Address"
msgstr "Broadcast Adresa:"

#: standalone/drakconnect:561 standalone/harddrake2:21
#, c-format
msgid "Bus"
msgstr "Bus"

#: standalone/drakconnect:562 standalone/harddrake2:29
#, c-format
msgid "Location on the bus"
msgstr "Lokacija na busu"

#: standalone/drakconnect:632 standalone/drakgw:248 standalone/drakpxe:138
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Nije detektovana nijedna mrežna kartica. Pokrenite alat za konfigurisanje "
"hardvera."

#: standalone/drakconnect:638
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "Izaberite mrežni interfejs"

#: standalone/drakconnect:642
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "Izaberite mrežni interfejs"

#: standalone/drakconnect:666
#, fuzzy, c-format
msgid ""
"An error occured while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"Pojavio se problem tokom restartovanja mreže?\n"
"%s"

#: standalone/drakconnect:668
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been succesfully deleted"
msgstr ""

#: standalone/drakconnect:685
#, c-format
msgid "No Ip"
msgstr ""

#: standalone/drakconnect:686
#, fuzzy, c-format
msgid "No Mask"
msgstr "Loš paket"

#: standalone/drakconnect:687 standalone/drakconnect:850
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:687 standalone/drakconnect:850
#, fuzzy, c-format
msgid "down"
msgstr "urađeno"

#: standalone/drakconnect:728 standalone/net_monitor:415
#, c-format
msgid "Connected"
msgstr "Konektovan"

#: standalone/drakconnect:728 standalone/net_monitor:415
#, c-format
msgid "Not connected"
msgstr "Nije konektovan"

#: standalone/drakconnect:730
#, c-format
msgid "Disconnect..."
msgstr "Diskonektovan..."

#: standalone/drakconnect:730
#, c-format
msgid "Connect..."
msgstr "Konektovanje..."

#: standalone/drakconnect:759
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""
"Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu "
"mrežu"

#: standalone/drakconnect:775
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "deaktiviraj sad"

#: standalone/drakconnect:775
#, fuzzy, c-format
msgid "Activate now"
msgstr "Aktiviraj sad"

#: standalone/drakconnect:783
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Vi nemate ni jedan interfejs koji je podešen.\n"
"Morate ih prvo podesite klikom na 'Configure'"

#: standalone/drakconnect:797
#, c-format
msgid "LAN Configuration"
msgstr "LAN konfiguracija"

#: standalone/drakconnect:809
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: standalone/drakconnect:818
#, c-format
msgid "Boot Protocol"
msgstr "Startni(Boot) protokol"

#: standalone/drakconnect:819
#, c-format
msgid "Started on boot"
msgstr "Pokrenuto pri startanju"

#: standalone/drakconnect:855
#, fuzzy, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrake Control Center"
msgstr ""
"Ovaj interfejs još uvek nije podešen.\n"
"Pokrenite konfiguracionog čarobnjaka u glavnom prozoru"

#: standalone/drakconnect:910
#, fuzzy, c-format
msgid ""
"You don't have any configured Internet connection.\n"
"Please run \"Internet access\" in control center."
msgstr ""
"Vi nemate ni jednu podešenu Internet konekciju.\n"
"Kreirajte je klikom na 'Configure'"

#: standalone/drakconnect:918
#, c-format
msgid "Internet connection configuration"
msgstr "Konfiguracija Internet konekcija"

#: standalone/drakconnect:936
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "Prvi DNS Server (opcija)"

#: standalone/drakconnect:958
#, c-format
msgid "Internet Connection Configuration"
msgstr "Konfiguracija Internet Konekcija"

#: standalone/drakconnect:959
#, c-format
msgid "Internet access"
msgstr "Internet pristup"

#: standalone/drakconnect:961 standalone/net_monitor:87
#, c-format
msgid "Connection type: "
msgstr "Tip konekcije: "

#: standalone/drakconnect:964
#, c-format
msgid "Status:"
msgstr "Status:"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr "Izbor menadžera za displej"

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"X11 Menadžer za displej vam dozvoljava da se grafički\n"
"prijavite u vaš sistem sa pokrenutim X Window Sistemom i podržava "
"pokretanje\n"
"nekoliko različitih X sesija na lokalnoj mašini u isto vreme."

#: standalone/drakedm:77
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr "Mreža mora da se restartuje. Da li želite da je restartujete ?"

#: standalone/drakfloppy:40
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:82
#, fuzzy, c-format
msgid "Boot disk creation"
msgstr "Kreiranje boot diska"

#: standalone/drakfloppy:83
#, c-format
msgid "General"
msgstr "Opšte"

#: standalone/drakfloppy:86
#, fuzzy, c-format
msgid "Device"
msgstr "Uređaj: "

#: standalone/drakfloppy:92
#, fuzzy, c-format
msgid "Kernel version"
msgstr "Verzija kernela"

#: standalone/drakfloppy:107
#, fuzzy, c-format
msgid "Preferences"
msgstr "Karakteristike: "

#: standalone/drakfloppy:121
#, fuzzy, c-format
msgid "Advanced preferences"
msgstr "Napredne opcije"

#: standalone/drakfloppy:140
#, c-format
msgid "Size"
msgstr "Veličina"

#: standalone/drakfloppy:143
#, fuzzy, c-format
msgid "Mkinitrd optional arguments"
msgstr "mkinitrd opcioni argumenti"

#: standalone/drakfloppy:145
#, c-format
msgid "force"
msgstr "silom"

#: standalone/drakfloppy:146
#, c-format
msgid "omit raid modules"
msgstr "omit raid moduli"

#: standalone/drakfloppy:147
#, c-format
msgid "if needed"
msgstr "ukoliko je potrebno"

#: standalone/drakfloppy:148
#, c-format
msgid "omit scsi modules"
msgstr "omit scsi moduli"

#: standalone/drakfloppy:151
#, c-format
msgid "Add a module"
msgstr "Dodaj modul"

#: standalone/drakfloppy:160
#, c-format
msgid "Remove a module"
msgstr "Ukloni modul"

#: standalone/drakfloppy:295
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Proverite da li je medij prisutan u uređaju %s"

#: standalone/drakfloppy:301
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Medij nije prisutan, ili je zaštićen oid upisa za uređaj %s.\n"
"Molim vas da ga ubacite."

#: standalone/drakfloppy:305
#, c-format
msgid "Unable to fork: %s"
msgstr "Ne mogu da forkujem: %s"

#: standalone/drakfloppy:308
#, fuzzy, c-format
msgid "Floppy creation completed"
msgstr "Povezivanje završeno."

#: standalone/drakfloppy:308
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#: standalone/drakfloppy:311
#, fuzzy, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"Ne mogu korektno da zatvorim mkbootdisk: \n"
" %s \n"
" %s"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "Traži instalirane fontove"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr "Deselektovani fontovi instalirani"

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr "parsiraj sve fontove"

#: standalone/drakfont:210
#, fuzzy, c-format
msgid "No fonts found"
msgstr "fontovi nisu pronađeni"

#: standalone/drakfont:218 standalone/drakfont:258 standalone/drakfont:325
#: standalone/drakfont:358 standalone/drakfont:366 standalone/drakfont:392
#: standalone/drakfont:410 standalone/drakfont:424
#, c-format
msgid "done"
msgstr "urađeno"

#: standalone/drakfont:223
#, fuzzy, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "ne mogu da pronađem nijedan font na montiranoj particiji"

#: standalone/drakfont:256
#, c-format
msgid "Reselect correct fonts"
msgstr "Ponovo selektuj ispravne fontove"

#: standalone/drakfont:259
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "ne mogu da pronađen nijedan font.\n"

#: standalone/drakfont:269
#, c-format
msgid "Search for fonts in installed list"
msgstr "Traži fontove u liti instaliranih"

#: standalone/drakfont:294
#, fuzzy, c-format
msgid "%s fonts conversion"
msgstr "Konverzija pfm fontova"

#: standalone/drakfont:323
#, c-format
msgid "Fonts copy"
msgstr "Kopija fonta"

#: standalone/drakfont:326
#, c-format
msgid "True Type fonts installation"
msgstr "Instalacija True Type fontova"

#: standalone/drakfont:333
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "sačekajte, u toku je ttmkfdir..."

#: standalone/drakfont:334
#, c-format
msgid "True Type install done"
msgstr "Instalacija True Type fontova završena"

#: standalone/drakfont:340 standalone/drakfont:355
#, c-format
msgid "type1inst building"
msgstr "kreiram type1inst"

#: standalone/drakfont:349
#, c-format
msgid "Ghostscript referencing"
msgstr "Ghostscript referenciranje"

#: standalone/drakfont:359
#, c-format
msgid "Suppress Temporary Files"
msgstr "Sažmi temp fajlove"

#: standalone/drakfont:362
#, c-format
msgid "Restart XFS"
msgstr "Restartuj XFS"

#: standalone/drakfont:408 standalone/drakfont:418
#, c-format
msgid "Suppress Fonts Files"
msgstr "Zažmi Font fajlove"

#: standalone/drakfont:420
#, c-format
msgid "xfs restart"
msgstr "Restart xfs"

#: standalone/drakfont:428
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate "
"i koristite na vašem sistemu.\n"
"\n"
"-Možete instalirati fontove na upoobičajeni način. U ređim slučajevimas, "
"bagoviti fontovi mogu srušiti vaš X Server."

#: standalone/drakfont:477 standalone/drakfont:486
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:487
#, c-format
msgid "Font List"
msgstr "Lista fontova"

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "O"

#: standalone/drakfont:495 standalone/drakfont:687 standalone/drakfont:725
#, fuzzy, c-format
msgid "Uninstall"
msgstr "Post-deinstalacija"

#: standalone/drakfont:496
#, fuzzy, c-format
msgid "Import"
msgstr "Uvoz fontova"

#: standalone/drakfont:512
#, c-format
msgid ""
"Copyright (C) 2001-2002 by MandrakeSoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""

#: standalone/drakfont:521
#, fuzzy, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
" Ovaj program je bespaltan; možete ga redistribuirati i/ili menjati\n"
" pod uslovima GNU General Public License kako je objavljeno\n"
" u Free Software Fondaciji; ili verziji 2, ili (u vašem slučaju)\n"
" bilo kojoj novijoj verziji.\n"
"\n"
" Ovaj program je distribuiran u nadi da će biti od koristi,\n"
" sli BEZ IKAKVIH GARANCIJA; čak i bez garancije za\n"
" KORISNOST i PRAKTIČNU UPOTREBU.  Pogledajte\n"
" GNU Opštu Javnu Licencu za više detalja.\n"
"\n"
" Trebali bi da mate kopiju GNU Opšte Javne  Licence\n"
" zajedno sa ovim programom; ukoliko je nemate, pišite nam na adresu Free "
"Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"

#: standalone/drakfont:537
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:556
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Izaberite aplikacije koje će podržavati fontove :"

#: standalone/drakfont:557
#, fuzzy, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate "
"i koristite na vašem sistemu.\n"
"\n"
"-Možete instalirati fontove na upoobičajeni način. U ređim slučajevimas, "
"bagoviti fontovi mogu srušiti vaš X Server."

#: standalone/drakfont:567
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:568
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:569
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:570
#, c-format
msgid "Generic Printers"
msgstr "Generic Štampači"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Izaberite font ili direktorijum i kliknite na  'Dodaj'"

#: standalone/drakfont:587
#, c-format
msgid "File Selection"
msgstr "Odabir fajlova"

#: standalone/drakfont:600
#, fuzzy, c-format
msgid "You've not selected any font"
msgstr "ne mogu da pronađen nijedan font.\n"

#: standalone/drakfont:652
#, fuzzy, c-format
msgid "Import fonts"
msgstr "Uvoz fontova"

#: standalone/drakfont:657
#, fuzzy, c-format
msgid "Install fonts"
msgstr "Deinstaliraj fontove"

#: standalone/drakfont:692
#, c-format
msgid "click here if you are sure."
msgstr "kliknite ovde ukoliko ste sigurni."

#: standalone/drakfont:694
#, c-format
msgid "here if no."
msgstr "a ovde ukoliko niste."

#: standalone/drakfont:733
#, c-format
msgid "Unselected All"
msgstr "Deselektuj Sve"

#: standalone/drakfont:736
#, c-format
msgid "Selected All"
msgstr "Selektuj Sve"

#: standalone/drakfont:739
#, c-format
msgid "Remove List"
msgstr "Ukloni Listu"

#: standalone/drakfont:750 standalone/drakfont:769
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "Uvoz fontova"

#: standalone/drakfont:754 standalone/drakfont:774
#, c-format
msgid "Initial tests"
msgstr "Testovi inicijala"

#: standalone/drakfont:755
#, c-format
msgid "Copy fonts on your system"
msgstr "Kopiraj fontove u sistem"

#: standalone/drakfont:756
#, c-format
msgid "Install & convert Fonts"
msgstr "Instliraj i konvertuj fontove"

#: standalone/drakfont:757
#, c-format
msgid "Post Install"
msgstr "Post-instalacija"

#: standalone/drakfont:775
#, c-format
msgid "Remove fonts on your system"
msgstr "Ukloni fontove iz sistema"

#: standalone/drakfont:776
#, c-format
msgid "Post Uninstall"
msgstr "Post-deinstalacija"

#: standalone/drakgw:58 standalone/drakgw:193
#, c-format
msgid "Internet Connection Sharing"
msgstr "Deljenje internet konekcije"

#: standalone/drakgw:124
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Deljenje internet konekcije je trenutno onemogućeno"

#: standalone/drakgw:125
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Podešavanje deljenja internet konekcije je već završeno.\n"
"Trenutno je onemogućeno.\n"
"\n"
"šta želite da uradite?"

#: standalone/drakgw:129 standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "omogući"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:101
#: standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "ponovo podesi"

#: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:101
#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
#, c-format
msgid "dismiss"
msgstr "ukloni"

#: standalone/drakgw:136
#, c-format
msgid "Enabling servers..."
msgstr ">Omogućavam servisi..."

#: standalone/drakgw:148
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Deljenje internet konekcije je omogućeno."

#: standalone/drakgw:151
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Deljenje internet konekcije je trenutno omogućeno "

#: standalone/drakgw:152
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Podešavanje deljenja internet konekcije je već završeno.\n"
"Trenutno je omogućeno.\n"
"\n"
"šta želite da uradite?"

#: standalone/drakgw:156 standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "onemogući"

#: standalone/drakgw:159
#, c-format
msgid "Disabling servers..."
msgstr "Uklanjam servise..."

#: standalone/drakgw:174
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Deljenje internet konekcije je onemogućeno."

#: standalone/drakgw:194
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Vaš računar možete podesiti za deljenje njegove Internet konekcije.\n"
"sa ovom opcijom, drugi kompjuteri na vašoj lokalnoj mreži će moći da "
"koristeInternet konekciju sa ovog računara.\n"
"\n"
"Proverite da li je podešena vaša Mrežni/Internet pristup preko drakconnect "
"pre nego što nastavimo.\n"
"\n"
"Napomena: potrebana vam je mrežna kartica da bi podesili lokalnu mrežu(LAN)."

#: standalone/drakgw:237
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interfejs %s (koristeći modul %s)"

#: standalone/drakgw:238
#, c-format
msgid "Interface %s"
msgstr "Interfejs %s"

#: standalone/drakgw:247 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "Nema mrežnog adaptera u vašem sistemu !"

#: standalone/drakgw:254
#, c-format
msgid "Network interface"
msgstr "Mrežni interfejs"

#: standalone/drakgw:255
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Postoji samo jedan konfigurisan mrežni adapter na vašem sistemu:\n"
"\n"
"%s\n"
"\n"
"Sada podeavam vašu lokalnu mrežu sa ovim adapterom."

#: standalone/drakgw:262
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "Izaberite koji će mrežni adapter biti korišten za LANmrežu."

#: standalone/drakgw:291
#, c-format
msgid "Network interface already configured"
msgstr "Mrežni interfejs je već podeššen"

#: standalone/drakgw:292
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Upozorenje, mrežni adapter (%s) ije već podešen.\n"
"\n"
"Da li želite da ga automatski prekonfigurišete?\n"
"\n"
"Možete to učiniti ručno ali morate da znate šta radite."

#: standalone/drakgw:297
#, c-format
msgid "Automatic reconfiguration"
msgstr "Automatska rekonfiguracija"

#: standalone/drakgw:297
#, c-format
msgid "No (experts only)"
msgstr "Ne (samo eksperti)"

#: standalone/drakgw:298
#, c-format
msgid "Show current interface configuration"
msgstr "Prikaži trenutnu konfiguraciju"

#: standalone/drakgw:299
#, c-format
msgid "Current interface configuration"
msgstr "Trenutna konfiguracija interfejsa"

#: standalone/drakgw:300
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Trenutna konfiguracija za `%s':\n"
"\n"
"Mreža: %s\n"
"IP adresa %s\n"
"IP atributi: %s\n"
"Drajver: %s"

#: standalone/drakgw:313
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Mogu da zadržim vašu trenutnu konfiguraciju i pretpostaviti da je već "
"podešen DHCP server; u tom slučaju proverite da li je dobro očitana Mreža "
"koju koristite za vašu lokalnu mrežu; Ja je neću rekonfigurisati i neću "
"dirati u vašu DHCP server konfiguraciju.\n"
"\n"
"default DNS unos je Caching Nameserver podešen na firewall-u. Možete je "
"zameniti sa vašim ISP DNS IP, na primer.\n"
"\t\t      \n"
"Inače, ja mogu da rekonfigurišem vaš interfejs i (re)konfigurišem DHCP "
"server za vas.\n"
"\n"

#: standalone/drakgw:320
#, c-format
msgid "Local Network adress"
msgstr "Adresa Lokalne Mreže"

#: standalone/drakgw:324
#, fuzzy, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is."
msgstr ""
"DHCP Server Konfiguracija.\n"
"\n"
"Ovde možete odabrati različite opcije za DHCP server konfiguraciju.\n"
"Ukoliko ne znate značenje neke opcije, jednostavno je nemojte menjati.\n"
"\n"

#: standalone/drakgw:328
#, c-format
msgid "(This) DHCP Server IP"
msgstr "(Ovaj) DHCP server IP"

#: standalone/drakgw:329
#, c-format
msgid "The DNS Server IP"
msgstr "DNS server IP"

#: standalone/drakgw:330
#, c-format
msgid "The internal domain name"
msgstr "Interno ime domena"

#: standalone/drakgw:331
#, c-format
msgid "The DHCP start range"
msgstr "DHCP početak raspona"

#: standalone/drakgw:332
#, c-format
msgid "The DHCP end range"
msgstr "DHCP kraj raspona"

#: standalone/drakgw:333
#, c-format
msgid "The default lease (in seconds)"
msgstr "default puštanje (u sekundama)"

#: standalone/drakgw:334
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Maksimalno puštanje (u sekundama)"

#: standalone/drakgw:335
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Rekonfiguriši interfejs i DHCP server"

#: standalone/drakgw:342
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "Lokalna Mreža nije završila sa`.0', bailing out."

#: standalone/drakgw:352
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n"

#: standalone/drakgw:362
#, c-format
msgid "Configuring..."
msgstr "Konfiguracija u toku..."

#: standalone/drakgw:363
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..."

#: standalone/drakgw:403 standalone/drakpxe:231 standalone/drakvpn:278
#, c-format
msgid "Problems installing package %s"
msgstr "Problemi pri instalaciji %s paketa"

#: standalone/drakgw:599
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"Sve je podešeno.\n"
"Sada možete deliti Internet konekciju sa drugim kompjuterima na vašoj "
"lokalnoj mreži  (LAN), koristeći automatsku mrežnu konfiguraciju (DHCP)."

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:35
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakhelp:41
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""
"Nijedan pretraživač nije instaliran. Molim Vas da instalirate jedan da bi "
"mogli da koristite sitem dza pomoć"

#: standalone/drakperm:21
#, fuzzy, c-format
msgid "System settings"
msgstr "Custom disk particioniranje"

#: standalone/drakperm:22
#, fuzzy, c-format
msgid "Custom settings"
msgstr "Custom disk particioniranje"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "Custom disk particioniranje"

#: standalone/drakperm:43
#, fuzzy, c-format
msgid "Editable"
msgstr "onemogući"

#: standalone/drakperm:48 standalone/drakperm:314
#, c-format
msgid "Path"
msgstr "Putanja"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Korisnik"

#: standalone/drakperm:48 standalone/drakperm:250
#, fuzzy, c-format
msgid "Group"
msgstr "grupa"

#: standalone/drakperm:48 standalone/drakperm:326
#, c-format
msgid "Permissions"
msgstr "Dozvole"

#: standalone/drakperm:107
#, fuzzy, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm se koristi da videli fajlove u cilju podešavanja dozvola, vlasnika "
"i grupa preko msec.\n"
"VI takođe možete da editujete svoja sopstvena pravila koja će biti iznad "
"default pravila."

#: standalone/drakperm:110
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr "gore"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr "Podigni odabrano pravilo za jedan nivo"

#: standalone/drakperm:122
#, c-format
msgid "Down"
msgstr "Dole"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr "Spusti odabrano pravilo za jedan nivo"

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Add a rule"
msgstr "Dodajte pravilo"

#: standalone/drakperm:123
#, c-format
msgid "Add a new rule at the end"
msgstr "Dodaj novo pravilo na kraju"

#: standalone/drakperm:124
#, c-format
msgid "Delete selected rule"
msgstr "Izbriši odabrano pravilo"

#: standalone/drakperm:125 standalone/drakups:281 standalone/drakups:330
#: standalone/drakups:350 standalone/drakvpn:333 standalone/drakvpn:694
#: standalone/printerdrake:229
#, fuzzy, c-format
msgid "Edit"
msgstr "Izlaz"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr "Uredi trenutno pravilo"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "pretraži"

#: standalone/drakperm:252
#, fuzzy, c-format
msgid "Read"
msgstr "Samo-čitanje"

#: standalone/drakperm:253
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:256
#, fuzzy, c-format
msgid "Write"
msgstr "Upiši %s"

#: standalone/drakperm:257
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:260
#, c-format
msgid "Execute"
msgstr "Izvrši"

#: standalone/drakperm:261
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:263
#, fuzzy, c-format
msgid "Sticky-bit"
msgstr "sticky-bit"

#: standalone/drakperm:263
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Korišćeno z direktorijum:\n"
" samo vlasnik direktorijuma ili fajla u ovom direktorijumu ga može izbrisati"

#: standalone/drakperm:264
#, c-format
msgid "Set-UID"
msgstr "Podesi-UID"

#: standalone/drakperm:264
#, c-format
msgid "Use owner id for execution"
msgstr "Koristi id vlasnika za izvršavanje"

#: standalone/drakperm:265
#, c-format
msgid "Set-GID"
msgstr "Podesi-GID"

#: standalone/drakperm:265
#, c-format
msgid "Use group id for execution"
msgstr "Koristi id grupe za izvršavanje"

#: standalone/drakperm:283 standalone/drakxtv:87
#, fuzzy, c-format
msgid "User :"
msgstr "korisnik:"

#: standalone/drakperm:285
#, fuzzy, c-format
msgid "Group :"
msgstr "grupa:"

#: standalone/drakperm:289
#, c-format
msgid "Current user"
msgstr "Trenutni korisnik"

#: standalone/drakperm:290
#, fuzzy, c-format
msgid "When checked, owner and group won't be changed"
msgstr "kada je selektovana, vlasnik i grupa ne mogu biti promenjeni"

#: standalone/drakperm:300
#, c-format
msgid "Path selection"
msgstr "Selekcija putanje"

#: standalone/drakperm:320
#, c-format
msgid "Property"
msgstr "Svojstvo"

#: standalone/drakpxe:55
#, c-format
msgid "PXE Server Configuration"
msgstr "Podešavanje PXE Servera"

#: standalone/drakpxe:111
#, c-format
msgid "Installation Server Configuration"
msgstr "Podešavanje Instalacionog servera"

#: standalone/drakpxe:112
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Vaš računar možete podesiti da instalira PXE server kao DHCP server.\n"
"kao i TFTP sever da bi kreirao instalacioni server.\n"
"Sa ovom opcijom, drugi kompjuteri na vašoj lokalnoj mreži će moći da koriste "
"instalaciju sa ovog računara.\n"
"\n"
"Proverite da li je podešena vaša Mrežni/Internet pristup preko drakconnect "
"pre nego što nastavimo.\n"
"\n"
"Napomena: potrebana vam je mrežna kartica da bi podesili lokalnu mrežu(LAN)."

#: standalone/drakpxe:143
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "Izaberite mrežni interfejs koji želite da koristite za dhcp server."

#: standalone/drakpxe:144
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Interfejs %s (na mreži %s)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"DHCP server će omogućiti drugi računarima da startuju koristeći PXE u datom "
"rasponu adresa.\n"
"\n"
"Mrežna adresa %s koristi netmask od %s.\n"
"\n"

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr "DHCP startni ip"

#: standalone/drakpxe:174
#, c-format
msgid "The DHCP end ip"
msgstr "DHCP krajnji ip"

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Ukažite na mesto gde se nalazi instalacioni image.\n"
"\n"
"Ukoliko nemate takav direktorijum, kopirajte sadržaj CD ili DVD diska.\n"
"\n"

#: standalone/drakpxe:192
#, c-format
msgid "Installation image directory"
msgstr "Instalacioni image direktorijum"

#: standalone/drakpxe:196
#, c-format
msgid "No image found"
msgstr "NIje pronađen image"

#: standalone/drakpxe:197
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Nije pronađen CD ili DVD image, kopirajte instalacioni program i rpm fajlove."

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"Ukažite na mesto gde se auto_install.cfg fajl nalazi.\n"
"\n"
"Ostavite ga nepopunjenim ukoliko ne želite da automatski instalacioni mod.\n"
"\n"

#: standalone/drakpxe:215
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Lokacija auto_install.cfg fajla"

#: standalone/draksec:44
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:44
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:44 standalone/drakvpn:1146
#, c-format
msgid "default"
msgstr "default"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "ignore"
msgstr "Singapur"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "no"
msgstr "Info"

#: standalone/draksec:44
#, fuzzy, c-format
msgid "yes"
msgstr "Da"

#: standalone/draksec:81
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu allows you to select one of the six preconfigured "
"security levels\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:129
#, c-format
msgid "(default value: %s)"
msgstr "(podrazumevana vrednost: %s)"

#: standalone/draksec:170
#, c-format
msgid "Security Level:"
msgstr "Nivo sigurnosti:"

#: standalone/draksec:173
#, c-format
msgid "Security Alerts:"
msgstr "Sigurnosni alarmi:"

#: standalone/draksec:177
#, c-format
msgid "Security Administrator:"
msgstr "Administrator za sigurnost:"

#: standalone/draksec:179
#, fuzzy, c-format
msgid "Basic options"
msgstr "DrakSec Osnovne Opcije"

#: standalone/draksec:192
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"Sledeće opcije se mogu postaviti da podese vaš\n"
"sigurnosni sistem. Ukoliko vam treba objašnjenje, kliknite na pomoć.\n"

#: standalone/draksec:194
#, c-format
msgid "Network Options"
msgstr "Mrežne opcije"

#: standalone/draksec:194
#, c-format
msgid "System Options"
msgstr "Sisitemske opcije"

#: standalone/draksec:240
#, c-format
msgid "Periodic Checks"
msgstr "Periodične provere"

#: standalone/draksec:258
#, c-format
msgid "Please wait, setting security level..."
msgstr "Samo momenat, podešavam nivo sigurnosti..."

#: standalone/draksec:264
#, c-format
msgid "Please wait, setting security options..."
msgstr "Samo momenat, podešavam sigurnosne opcije..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "Zvučna kartica nije detektovana!"

#: standalone/draksound:48
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Zvučna kartica nije detektovana na vašoj mašini. Proverite da li Linux-"
"supported zvučna kartica pravilno priključena.\n"
"\n"
"\n"
"Možete posetiti našu bazu podržanog hardvera na:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/draksound:55
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Napomena: ukoliko iamte ISA PnP zvučnu karticu, moraćete da koristite "
"sndconfig program.  Samo ukucajte \"sndconfig\" u konzoli."

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"paket 'ImageMagick' je potreban da pravilan rad.\n"
"Kliknite na \"U redu\" za bi instalirali 'ImageMagick' ili \"Poništi\" za "
"kraj"

#: standalone/draksplash:68
#, c-format
msgid "first step creation"
msgstr "kreiranje prvog koraka"

#: standalone/draksplash:71
#, c-format
msgid "final resolution"
msgstr "konačna rezolucija"

#: standalone/draksplash:72
#, c-format
msgid "choose image file"
msgstr "izaberite sliku"

#: standalone/draksplash:73
#, c-format
msgid "Theme name"
msgstr "Ime teme"

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "pretraži"

#: standalone/draksplash:93 standalone/draksplash:158
#, c-format
msgid "Configure bootsplash picture"
msgstr "Podesite bootsplash sliku"

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""
"x koordinata tekst boksa\n"
"u broju karaktera"

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"y koorditnata tekst boksa\n"
"u broju karaktera"

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr "širina teksta"

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr "visina tekst boksa"

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"x koordinata trake sa prikazom napretka\n"
"od svog gornjeg levog ugla"

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"y koorinata trake sa prikazom napretka\n"
"od svog gorenjeg levog ugla"

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr "sirina trake sa prikazom napretka"

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr "visina trake sa prikazom napretka"

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr "boja trake sa prikazom napretka"

#: standalone/draksplash:119
#, c-format
msgid "Preview"
msgstr "Pregled"

#: standalone/draksplash:121
#, c-format
msgid "Save theme"
msgstr "Sačuvajte temu"

#: standalone/draksplash:122
#, c-format
msgid "Choose color"
msgstr "Izaberite boju"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr "Prikaži logo u konzoli"

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr "Podesite sa poruka kernela bude skrivena po osnovnoj postavci"

#: standalone/draksplash:161 standalone/draksplash:319
#: standalone/draksplash:462
#, c-format
msgid "Notice"
msgstr "Napomena"

#: standalone/draksplash:161 standalone/draksplash:319
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "Ova tema nema nijedan bootsplash u %s !"

#: standalone/draksplash:167
#, fuzzy, c-format
msgid "choose image"
msgstr "izaberite sliku"

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr "snimam Bootsplash temu..."

#: standalone/draksplash:443
#, c-format
msgid "ProgressBar color selection"
msgstr "Izbor boje za traku koja prikazuje stanje napredovanja"

#: standalone/draksplash:462
#, c-format
msgid "You must choose an image file first!"
msgstr "Morate izabrati prvo sliku!"

#: standalone/draksplash:467
#, c-format
msgid "Generating preview ..."
msgstr "Generišem pregled..."

#: standalone/draksplash:512
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "%s BootSplash (%s) pregled"

#: standalone/drakups:63
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:69
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "Dodaj vrednost"

#: standalone/drakups:72
#, fuzzy, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll be add a new UPS to your system.\n"
msgstr ""
"Dobrodošli u alat za konfiguraciju el.pošte\n"
"\n"
"Ovde možete da podesite alarmni sistem.\n"

#: standalone/drakups:79
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you prefer autodetect UPS devices connected to this machine or  ?"
msgstr ""

#: standalone/drakups:82
#, fuzzy, c-format
msgid "Autodetection"
msgstr "Auto-detekcija"

#: standalone/drakups:90 standalone/harddrake2:134
#, c-format
msgid "Detection in progress"
msgstr "Detekcija u toku"

#: standalone/drakups:108 standalone/drakups:144 standalone/logdrake:479
#: standalone/logdrake:485
#, fuzzy, c-format
msgid "Congratulations"
msgstr "Čestitamo !"

#: standalone/drakups:109
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:111
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "NIje pronađen image"

#: standalone/drakups:116 standalone/drakups:128
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "CUPSkonfiguracija za deljenje štampača"

#: standalone/drakups:116
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "Molim Vas da testirate miša"

#: standalone/drakups:117
#, fuzzy, c-format
msgid "Manufacturer / Model:"
msgstr "Proizođač i model štampača"

#: standalone/drakups:128
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:133
#, c-format
msgid "Name:"
msgstr "Ime:"

#: standalone/drakups:133
#, fuzzy, c-format
msgid "The name of your ups"
msgstr "Ime prizovđača uređaja"

#: standalone/drakups:134
#, c-format
msgid "The driver that manage your ups"
msgstr ""

#: standalone/drakups:135
#, fuzzy, c-format
msgid "Port:"
msgstr "Port"

#: standalone/drakups:137
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "Tip busa na koji je vaš miš priključen."

#: standalone/drakups:144
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:232
#, fuzzy, c-format
msgid "UPS devices"
msgstr "Servisi"

#: standalone/drakups:233 standalone/drakups:251 standalone/drakups:266
#: standalone/harddrake2:63
#, c-format
msgid "Name"
msgstr "Ime"

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS users"
msgstr "Korisnici"

#: standalone/drakups:265
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "pristup mrežnim alatima"

#: standalone/drakups:266
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:277
#, fuzzy, c-format
msgid "Rules"
msgstr "Ruteri:"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "Action"
msgstr "/_Akcije"

#: standalone/drakups:278 standalone/drakvpn:1146 standalone/harddrake2:57
#, c-format
msgid "Level"
msgstr "Nivo"

#: standalone/drakups:278
#, fuzzy, c-format
msgid "ACL name"
msgstr "LVM ime?"

#: standalone/drakups:297 standalone/drakups:301 standalone/drakups:310
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Dvorak (US)"

#: standalone/drakups:307
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Testiranje konfiguracije"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Dvorak (US)"

#: standalone/drakvpn:95
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "Deljenje internet konekcije je omogućeno."

#: standalone/drakvpn:96
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do ?"
msgstr ""
"Podešavanje deljenja internet konekcije je već završeno.\n"
"Trenutno je omogućeno.\n"
"\n"
"šta želite da uradite?"

#: standalone/drakvpn:105
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "Uklanjam servise..."

#: standalone/drakvpn:114
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "Deljenje internet konekcije je onemogućeno."

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "Deljenje internet konekcije je trenutno onemogućeno"

#: standalone/drakvpn:122
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do ?"
msgstr ""
"Podešavanje deljenja internet konekcije je već završeno.\n"
"Trenutno je onemogućeno.\n"
"\n"
"šta želite da uradite?"

#: standalone/drakvpn:135
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr ">Omogućavam servisi..."

#: standalone/drakvpn:141
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "Deljenje internet konekcije je omogućeno."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "Ukloni modul"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel need to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:292
#, fuzzy, c-format
msgid "Security Policies"
msgstr "Sigurnosni alarmi:"

#: standalone/drakvpn:292
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:295 standalone/drakvpn:306
#, fuzzy, c-format
msgid "Configuration file"
msgstr "Konfiguracija"

#: standalone/drakvpn:296
#, c-format
msgid ""
"Configuration step !\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure ?\n"
msgstr ""

#: standalone/drakvpn:307
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:325 standalone/drakvpn:685
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s sektora"

#: standalone/drakvpn:326
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now :\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do ?\n"
msgstr ""

#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "dnevno"

#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid "Commit"
msgstr "kompakt"

#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
#: standalone/drakvpn:713
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "LAN konfiguracija"

#: standalone/drakvpn:352
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:368
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:369
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton :\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "config setup"
msgstr "ponovo podesi"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "conn %default"
msgstr "default"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "normal conn"
msgstr "Normalni Mod"

#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
#, fuzzy, c-format
msgid "Exists !"
msgstr "Izlaz"

#: standalone/drakvpn:383 standalone/drakvpn:424
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:400
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:405
#, fuzzy, c-format
msgid "interfaces"
msgstr "Interfejs"

#: standalone/drakvpn:406
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:409
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:410
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:444
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If don't define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:451
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:452
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:453
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:454
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:455 standalone/drakvpn:494
#, fuzzy, c-format
msgid "left"
msgstr "Obriši"

#: standalone/drakvpn:456 standalone/drakvpn:495
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:457 standalone/drakvpn:496
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:458 standalone/drakvpn:497
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:459 standalone/drakvpn:498
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:491
#, fuzzy, c-format
msgid "section name"
msgstr "Ime konekcije"

#: standalone/drakvpn:492
#, fuzzy, c-format
msgid "authby"
msgstr "Putanja"

#: standalone/drakvpn:493
#, fuzzy, c-format
msgid "auto"
msgstr "O"

#: standalone/drakvpn:499
#, fuzzy, c-format
msgid "right"
msgstr "Velika"

#: standalone/drakvpn:500
#, fuzzy, c-format
msgid "rightcert"
msgstr "Višlji"

#: standalone/drakvpn:501
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:502
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:503
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:511
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:543
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:576 standalone/drakvpn:826
#, fuzzy, c-format
msgid "Edit section"
msgstr "Selekcija putanje"

#: standalone/drakvpn:577
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
#: standalone/drakvpn:877
#, fuzzy, c-format
msgid "Section names"
msgstr "Ime konekcije"

#: standalone/drakvpn:590
#, fuzzy, c-format
msgid "Can't edit !"
msgstr "Ne mogu pronađem  %s na %s"

#: standalone/drakvpn:591
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the oportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:600
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:611
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:624
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:645
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:656 standalone/drakvpn:873
#, fuzzy, c-format
msgid "Remove section"
msgstr "Ukloni Listu"

#: standalone/drakvpn:657 standalone/drakvpn:874
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:686
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now :\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:728
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton :\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "path"
msgstr "Putanja"

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "remote"
msgstr "Ukloni"

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "sainfo"
msgstr "Info"

#: standalone/drakvpn:743
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:746
#, fuzzy, c-format
msgid "path type"
msgstr "Promena tipa"

#: standalone/drakvpn:750
#, c-format
msgid ""
"path include path : specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file : specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path : racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion : include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File : Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:770 standalone/drakvpn:863
#, fuzzy, c-format
msgid "real file"
msgstr "Izaberite datoteku"

#: standalone/drakvpn:793
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:810
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:827
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:838
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:847
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:855
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:862
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:903
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:923
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:924
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:941
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Evropski protokol"

#: standalone/drakvpn:942
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:956
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:957
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:974
#, fuzzy, c-format
msgid "Sainfo destination protocol"
msgstr "Alat za prelazak za Windows-a"

#: standalone/drakvpn:975
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples : \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:991
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:996
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "broj"

#: standalone/drakvpn:997
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1015
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will be not proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour ;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1031 standalone/drakvpn:1116
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "Autentifikacija"

#: standalone/drakvpn:1033
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "Autentifikacija"

#: standalone/drakvpn:1035
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1036
#, fuzzy, c-format
msgid "deflate"
msgstr "default"

#: standalone/drakvpn:1043
#, fuzzy, c-format
msgid "Remote"
msgstr "Ukloni"

#: standalone/drakvpn:1044
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples : \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1052
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "Mod za biranje"

#: standalone/drakvpn:1054
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1060
#, fuzzy, c-format
msgid "Generate policy"
msgstr "Sigurnost"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "off"
msgstr ""

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, fuzzy, c-format
msgid "on"
msgstr "Dole"

#: standalone/drakvpn:1062
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1076
#, fuzzy, c-format
msgid "Passive"
msgstr "Palestina"

#: standalone/drakvpn:1078
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1081
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1083
#, fuzzy, c-format
msgid "My certfile"
msgstr "Izaberite datoteku"

#: standalone/drakvpn:1084
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "Ime štampača"

#: standalone/drakvpn:1085
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1086
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "Ime štampača"

#: standalone/drakvpn:1087
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "Izaberite datoteku"

#: standalone/drakvpn:1088
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1089
#, fuzzy, c-format
msgid "Verify cert"
msgstr "veoma lepo"

#: standalone/drakvpn:1091
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1093
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1094
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, fqdn,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier fqdn string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples : \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1114
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "Štampač"

#: standalone/drakvpn:1115
#, fuzzy, c-format
msgid "Proposal"
msgstr "Protokol"

#: standalone/drakvpn:1117
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of following: \n"
"\n"
"des, 3des, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1125
#, fuzzy, c-format
msgid "Authentication method"
msgstr "Autentifikacija"

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "DH group"
msgstr "grupa"

#: standalone/drakvpn:1133
#, fuzzy, c-format
msgid "Command"
msgstr "Komandna linija"

#: standalone/drakvpn:1134
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1135
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1136
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Evropski protokol"

#: standalone/drakvpn:1136 standalone/drakvpn:1143
#, fuzzy, c-format
msgid "any"
msgstr "Dan"

#: standalone/drakvpn:1138
#, fuzzy, c-format
msgid "Flag"
msgstr "Zastave"

#: standalone/drakvpn:1139
#, fuzzy, c-format
msgid "Direction"
msgstr "Opis"

#: standalone/drakvpn:1140
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "ipsec"
msgstr "Msec"

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "discard"
msgstr "onemogućeno"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "Mode"
msgstr "Model"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "tunnel"
msgstr "Kanal"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "transport"
msgstr "prebačeno"

#: standalone/drakvpn:1145
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Radna stanica"

#: standalone/drakvpn:1146
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "use"
msgstr "Miš"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "unique"
msgstr "Martinik"

#: standalone/drakxtv:43
#, c-format
msgid "USA (broadcast)"
msgstr "USA (broadcast)"

#: standalone/drakxtv:43
#, c-format
msgid "USA (cable)"
msgstr "SAD (kabl)"

#: standalone/drakxtv:43
#, c-format
msgid "USA (cable-hrc)"
msgstr "SAD (kabl-hrc)"

#: standalone/drakxtv:43
#, c-format
msgid "Canada (cable)"
msgstr "Kanada (kabl)"

#: standalone/drakxtv:44
#, c-format
msgid "Japan (broadcast)"
msgstr "Japan (broadcast)"

#: standalone/drakxtv:44
#, c-format
msgid "Japan (cable)"
msgstr "Japan (kabl)"

#: standalone/drakxtv:44
#, c-format
msgid "China (broadcast)"
msgstr "Kina (broadcast)"

#: standalone/drakxtv:45
#, c-format
msgid "West Europe"
msgstr "Zapadna Evropa"

#: standalone/drakxtv:45
#, c-format
msgid "East Europe"
msgstr "Istočna Evropa"

#: standalone/drakxtv:45
#, c-format
msgid "France [SECAM]"
msgstr "Francuska [SECAM]"

#: standalone/drakxtv:46
#, c-format
msgid "Newzealand"
msgstr "Novi Zeland"

#: standalone/drakxtv:49
#, c-format
msgid "Australian Optus cable TV"
msgstr "Australijska Optus kablovska TV"

#: standalone/drakxtv:83
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Molim Vas da\n"
"ukucate vaš tv sistem i zemlju"

#: standalone/drakxtv:85
#, c-format
msgid "TV norm:"
msgstr "TV sistem :"

#: standalone/drakxtv:86
#, c-format
msgid "Area:"
msgstr "Područje :"

#: standalone/drakxtv:91
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "Skeniranje TV kanala u toku ..."

#: standalone/drakxtv:101
#, c-format
msgid "Scanning for TV channels"
msgstr "Skeniranje za TV kanale"

#: standalone/drakxtv:105
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Greška pri skeniranju TV kanala"

#: standalone/drakxtv:108
#, c-format
msgid "Have a nice day!"
msgstr "Želimo vam prijatan dan!"

#: standalone/drakxtv:109
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Sada možete pokrenuti xawtv (pod X Window okruženjem!) !\n"

#: standalone/drakxtv:132
#, c-format
msgid "No TV Card detected!"
msgstr "TV kartica nije detektovana!"

#: standalone/drakxtv:133
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"TV kartica na vašem računaru nije detektovana. Proverite da li Linux-"
"supported Video/TV kartica pravilno priključena.\n"
"\n"
"\n"
"Možete posetiti našu bazu podržanog hardvera na:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/harddrake2:18
#, c-format
msgid "Alternative drivers"
msgstr "Alternativni drajveri"

#: standalone/harddrake2:19
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "lista alternativnih drajvera za ovu zvučnu karticu"

#: standalone/harddrake2:22
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "ovo je fizički bus na koji je uređaj priključen (npr: PCI, USB, ...)"

#: standalone/harddrake2:23
#, c-format
msgid "Channel"
msgstr "Kanal"

#: standalone/harddrake2:23
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI kanal"

#: standalone/harddrake2:24
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:24
#, fuzzy, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"GNU/Linux kernel mora da pokrene računsku petlju  pri startanju da bi "
"inicijalizovao brojač vremena.  Njegov rezultat je uskladišten kao bogomips "
"kao neka vrsta \"benchmarka\" za procesor."

#: standalone/harddrake2:26
#, c-format
msgid "Bus identification"
msgstr "Identifikacija busa"

#: standalone/harddrake2:27
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- PCI i USB uređaji : ovo prikazuje proizvođača, uređaj, podproizvođača i "
"brojeve PCI/USB uređaja"

#: standalone/harddrake2:30
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- pci uređaji: ovo nam daje PCI slot, uređaj i funkciju za ovu karticu\n"
"- eide uređaji: uređaj je ili slave ili master\n"
"- scsi uređaji: scsi bus i id scsi uređaja"

#: standalone/harddrake2:33
#, c-format
msgid "Cache size"
msgstr "Veličina keša"

#: standalone/harddrake2:33
#, fuzzy, c-format
msgid "size of the (second level) cpu cache"
msgstr "Veličina (drugi nivo) procesorskog keša"

#: standalone/harddrake2:34
#, c-format
msgid "Drive capacity"
msgstr "Kapacitet uređaja"

#: standalone/harddrake2:34
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "specijalni kapaciteti uređaja (burning opcija i ili podrška za DVD)"

#: standalone/harddrake2:36
#, c-format
msgid "Coma bug"
msgstr "Coma bug"

#: standalone/harddrake2:36
#, fuzzy, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "Da li ovaj procesor ima Cyrix 6x86 Coma bag"

#: standalone/harddrake2:37
#, c-format
msgid "Cpuid family"
msgstr "Cpuid familija"

#: standalone/harddrake2:37
#, fuzzy, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "Familija procesora (npr: 6 za i686 klasu)"

#: standalone/harddrake2:38
#, c-format
msgid "Cpuid level"
msgstr "Cpuid nivo"

#: standalone/harddrake2:38
#, fuzzy, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "Nivo informacija koji može biti dobavljen kroz cpuid instrukcije"

#: standalone/harddrake2:39
#, c-format
msgid "Frequency (MHz)"
msgstr "Frekvenicja (MHz)"

#: standalone/harddrake2:39
#, fuzzy, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"Frekvencija procesora u MHz (Mega herz koji u prvoj aproksimaciji može biti "
"smatran za broj instrukcija koje procesor može da izvrši u sekundi)"

#: standalone/harddrake2:40
#, fuzzy, c-format
msgid "this field describes the device"
msgstr "Ovo polje opisuje uređaj"

#: standalone/harddrake2:41
#, c-format
msgid "Old device file"
msgstr "Stari fajl uređaja"

#: standalone/harddrake2:42
#, c-format
msgid "old static device name used in dev package"
msgstr "staro statičko ime uređaja korišteno u dev paketu"

#: standalone/harddrake2:43
#, c-format
msgid "New devfs device"
msgstr "Novi devfs uređaj"

#: standalone/harddrake2:44
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "novo dinamičko ime uređaja generisano od strane core kernel devfs"

#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "Modul"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "modul GNU/Linux kernela koji upravlja tim uređajem"

#: standalone/harddrake2:47
#, c-format
msgid "Flags"
msgstr "Zastave"

#: standalone/harddrake2:47
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "CPU zastave prijavljena od strane kernela"

#: standalone/harddrake2:48
#, c-format
msgid "Fdiv bug"
msgstr "Fdiv bug"

#: standalone/harddrake2:49
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Rani Intel Pentium čipovi su imali grešku u floating tački procesora koji "
"nije uspevao da postigne zahtevanu preciznost pri izvođenju Floating point "
"DIVision (FDIV)"

#: standalone/harddrake2:50
#, c-format
msgid "Is FPU present"
msgstr "da je FPU prisutan"

#: standalone/harddrake2:50
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "da znači da procesor ima aritmetički koprocesor"

#: standalone/harddrake2:51
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Gde god FPU ima irq vektor"

#: standalone/harddrake2:51
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr "sa znači da aritmetički koprocesor ima prikačen dodatni vektor"

#: standalone/harddrake2:52
#, c-format
msgid "F00f bug"
msgstr "F00f bug"

#: standalone/harddrake2:52
#, fuzzy, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
"Prvi pentium procesori su bili bagoviti i blokirali su rad pri ddekodiranju "
"F00F bytecode"

#: standalone/harddrake2:53
#, c-format
msgid "Halt bug"
msgstr "Halt bug"

#: standalone/harddrake2:54
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Neki rani i486DX-100 čipovi ne mogu da se pouzdano vrate u operativno stanje "
"posle korišćenja \"halt\" instrukcije"

#: standalone/harddrake2:56
#, c-format
msgid "Floppy format"
msgstr "Format diskete"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "format of floppies supported by the drive"
msgstr "Format disketa koje uređaj prihvata"

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "sub generation of the cpu"
msgstr "Pod generacija za procesor"

#: standalone/harddrake2:58
#, c-format
msgid "class of hardware device"
msgstr "klasa hardverskog uređaja"

#: standalone/harddrake2:59 standalone/harddrake2:60
#: standalone/printerdrake:212
#, c-format
msgid "Model"
msgstr "Model"

#: standalone/harddrake2:59
#, c-format
msgid "hard disk model"
msgstr "model hard diska"

#: standalone/harddrake2:60
#, fuzzy, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "Generacija procesora (npr.: 8 za PentiumIII, ...)"

#: standalone/harddrake2:61
#, c-format
msgid "Model name"
msgstr "Ime modela"

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "official vendor name of the cpu"
msgstr "Zvanično ime proizvođača za procesor"

#: standalone/harddrake2:62
#, c-format
msgid "Number of buttons"
msgstr "Broj tastera"

#: standalone/harddrake2:62
#, fuzzy, c-format
msgid "the number of buttons the mouse has"
msgstr "Broj procesora"

#: standalone/harddrake2:63
#, fuzzy, c-format
msgid "the name of the CPU"
msgstr "Ime prizovđača uređaja"

#: standalone/harddrake2:64
#, c-format
msgid "network printer port"
msgstr "port mrežnog štampača"

#: standalone/harddrake2:65
#, c-format
msgid "Processor ID"
msgstr "ID procesora"

#: standalone/harddrake2:65
#, c-format
msgid "the number of the processor"
msgstr "Broj procesora"

#: standalone/harddrake2:66
#, c-format
msgid "Model stepping"
msgstr "Model stepping"

#: standalone/harddrake2:66
#, fuzzy, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "Stepping procesora(podmodel (generacija) broj)"

#: standalone/harddrake2:67
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "Tip busa na koji je vaš miš priključen."

#: standalone/harddrake2:68
#, c-format
msgid "the vendor name of the device"
msgstr "Ime prizovđača uređaja"

#: standalone/harddrake2:69
#, c-format
msgid "the vendor name of the processor"
msgstr "imee prizvođača procesora"

#: standalone/harddrake2:70
#, fuzzy, c-format
msgid "Write protection"
msgstr "Auto-detekcija štampača"

#: standalone/harddrake2:70
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:84 standalone/logdrake:78 standalone/printerdrake:146
#: standalone/printerdrake:159
#, c-format
msgid "/_Options"
msgstr "/_Opcije"

#: standalone/harddrake2:85 standalone/harddrake2:106 standalone/logdrake:80
#: standalone/printerdrake:171 standalone/printerdrake:172
#: standalone/printerdrake:173 standalone/printerdrake:174
#, c-format
msgid "/_Help"
msgstr "/_Pomoć"

#: standalone/harddrake2:89
#, c-format
msgid "/Autodetect _printers"
msgstr "/Autodetekcija _štampača"

#: standalone/harddrake2:90
#, c-format
msgid "/Autodetect _modems"
msgstr "/Autodetekcija _modema"

#: standalone/harddrake2:91
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Autodetekcija _jaz uređaja"

#: standalone/harddrake2:98 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/_Kraj"

#: standalone/harddrake2:107
#, c-format
msgid "/_Fields description"
msgstr "/_Opis polja"

#: standalone/harddrake2:109
#, c-format
msgid "Harddrake help"
msgstr "Harddrake pomoć"

#: standalone/harddrake2:110
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Opis za polja:\n"
"\n"

#: standalone/harddrake2:115
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"Kada jednom izaberete uređaj, moći ćete da vidite objašnjenje na poljima "
"prikazanim u desnom okviru  (\"Informacije\")"

#: standalone/harddrake2:120 standalone/printerdrake:173
#, c-format
msgid "/_Report Bug"
msgstr "/_Prijavite Bag"

#: standalone/harddrake2:121 standalone/printerdrake:174
#, c-format
msgid "/_About..."
msgstr "/_O..."

#: standalone/harddrake2:122
#, c-format
msgid "About Harddrake"
msgstr "O Harddrake-u"

#: standalone/harddrake2:124
#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"Ovo je HardDrake, Mandrake-ov alat za podešavanje hardvera.\n"
"Verzija:"

#: standalone/harddrake2:141
#, c-format
msgid "Harddrake2 version %s"
msgstr "Harddrake2 verzija %s"

#: standalone/harddrake2:157
#, c-format
msgid "Detected hardware"
msgstr "Detektovani hardver"

#: standalone/harddrake2:162
#, c-format
msgid "Configure module"
msgstr "Modul za podešavanje"

#: standalone/harddrake2:169
#, c-format
msgid "Run config tool"
msgstr "Pokreni konfiguracioni alat"

#: standalone/harddrake2:216
#, c-format
msgid "unknown"
msgstr "Nepoznato"

#: standalone/harddrake2:217
#, c-format
msgid "Unknown"
msgstr "Nepoznato"

#: standalone/harddrake2:235
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "Kliknite na uređaj u levom stablu da bi ovde prikazali informacije."

#: standalone/harddrake2:286
#, c-format
msgid "secondary"
msgstr "sekundarno"

#: standalone/harddrake2:286
#, c-format
msgid "primary"
msgstr "primarno"

#: standalone/harddrake2:294
#, fuzzy, c-format
msgid "burner"
msgstr "Štampač"

#: standalone/harddrake2:294
#, fuzzy, c-format
msgid "DVD"
msgstr "DVD-ROM"

#: standalone/keyboarddrake:24
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Koji  raspored tastature želite ?"

#: standalone/keyboarddrake:33
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Da li želite da BackSpace da vrati Delete u konzolu?"

#: standalone/localedrake:60
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "Izmene su završene, ali da bi ih primenili morate se izlogovati"

#: standalone/logdrake:51
#, fuzzy, c-format
msgid "Mandrake Tools Logs"
msgstr "Mandrake Alati za objašnjenja"

#: standalone/logdrake:52
#, fuzzy, c-format
msgid "Logdrake"
msgstr "logdrake"

#: standalone/logdrake:65
#, c-format
msgid "Show only for the selected day"
msgstr "Prikaži samo za izabrani dan"

#: standalone/logdrake:72
#, c-format
msgid "/File/_New"
msgstr "/Datoteka/_Nova"

#: standalone/logdrake:72
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Open"
msgstr "/Datoteka/_Otvori"

#: standalone/logdrake:73
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:74
#, c-format
msgid "/File/_Save"
msgstr "/Datoteka/_Snimi"

#: standalone/logdrake:74
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:75
#, c-format
msgid "/File/Save _As"
msgstr "/Datoteka/Snimi _Kao"

#: standalone/logdrake:76
#, c-format
msgid "/File/-"
msgstr "/Fajl/-"

#: standalone/logdrake:79
#, c-format
msgid "/Options/Test"
msgstr "/Opcije/Test"

#: standalone/logdrake:81
#, c-format
msgid "/Help/_About..."
msgstr "/Pomoć/_O..."

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:113
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:117
#, c-format
msgid "search"
msgstr "traži"

#: standalone/logdrake:129
#, c-format
msgid "A tool to monitor your logs"
msgstr "Alat za pregledanje log datoteka"

#: standalone/logdrake:130 standalone/net_monitor:85
#, c-format
msgid "Settings"
msgstr "Opcije"

#: standalone/logdrake:135
#, fuzzy, c-format
msgid "Matching"
msgstr "poklapanje"

#: standalone/logdrake:136
#, c-format
msgid "but not matching"
msgstr "ali ne poklapa se"

#: standalone/logdrake:140
#, c-format
msgid "Choose file"
msgstr "Izaberi datoteku"

#: standalone/logdrake:149
#, c-format
msgid "Calendar"
msgstr "Kalendar"

#: standalone/logdrake:159
#, c-format
msgid "Content of the file"
msgstr "Sadržaj datotekse"

#: standalone/logdrake:163 standalone/logdrake:429
#, c-format
msgid "Mail alert"
msgstr "Mail alarm"

#: standalone/logdrake:170
#, c-format
msgid "The alert wizard had unexpectly failled:"
msgstr ""

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "molim Vas sačekajte, parsiram datoteku: %s"

#: standalone/logdrake:406
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Apache World Wide Web Server"

#: standalone/logdrake:407
#, c-format
msgid "Domain Name Resolver"
msgstr "Program za definisanje Imena domena"

#: standalone/logdrake:408
#, c-format
msgid "Ftp Server"
msgstr "Ftp Server"

#: standalone/logdrake:409
#, c-format
msgid "Postfix Mail Server"
msgstr "Postfix mail server"

#: standalone/logdrake:410
#, c-format
msgid "Samba Server"
msgstr "Samba Server"

#: standalone/logdrake:411
#, c-format
msgid "SSH Server"
msgstr "SSH Server"

#: standalone/logdrake:412
#, c-format
msgid "Webmin Service"
msgstr "Webmin Servis"

#: standalone/logdrake:413
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd Servis"

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "Promenite sistem za štampanje"

#: standalone/logdrake:425
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:432
#, c-format
msgid "Mail alert configuration"
msgstr "KOnfiguracija alarma za Mail"

#: standalone/logdrake:433
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Dobrodošli u alat za konfiguraciju el.pošte\n"
"\n"
"Ovde možete da podesite alarmni sistem.\n"

#: standalone/logdrake:436
#, fuzzy, c-format
msgid "What do you want to do?"
msgstr "Gde biste da montirate %s uređaj ?"

#: standalone/logdrake:443
#, fuzzy, c-format
msgid "Services settings"
msgstr "podešavanje servisa"

#: standalone/logdrake:444
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "Oglasiće se alarm ukoliko jedan od izabranih servisa nije više aktivan"

#: standalone/logdrake:451
#, fuzzy, c-format
msgid "Load setting"
msgstr "učitaj postavku"

#: standalone/logdrake:452
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Oglasiće se alarm ukoliko je učitano veće od ove vrednosti"

#: standalone/logdrake:453
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:458
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "konfiguracija alarma"

#: standalone/logdrake:459
#, c-format
msgid "Please enter your email address below "
msgstr "Unesite svoju email adresu dole"

#: standalone/logdrake:460
#, fuzzy, c-format
msgid "and enter the name (or the IP) of the SMTP server you whish to use"
msgstr "Unesite IP adresu i port hosta čije štampače želite da koristite."

#: standalone/logdrake:479
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:485
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:544
#, c-format
msgid "Save as.."
msgstr "Snimi Kao..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "Izaberite tip miša"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "Da imitiram rad 3 tastera?"

#: standalone/mousedrake:61
#, fuzzy, c-format
msgid "Mouse test"
msgstr "Mouse Systems"

#: standalone/mousedrake:64
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "Molim Vas da testirate miša"

#: standalone/net_monitor:51 standalone/net_monitor:56
#, c-format
msgid "Network Monitoring"
msgstr "Praćenje stanja mreže"

#: standalone/net_monitor:91
#, fuzzy, c-format
msgid "Global statistics"
msgstr "Statistika"

#: standalone/net_monitor:94
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:94
#, fuzzy, c-format
msgid "Average"
msgstr "prosek"

#: standalone/net_monitor:95
#, fuzzy, c-format
msgid ""
"Sending\n"
"speed:"
msgstr "Brzina pri slanju:"

#: standalone/net_monitor:96
#, fuzzy, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr "Brzina pri pprijemu:"

#: standalone/net_monitor:99
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "Vreme konekcije: "

#: standalone/net_monitor:121
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Molim Vas sačekajte, testiram vašu konekciju..."

#: standalone/net_monitor:149 standalone/net_monitor:162
#, fuzzy, c-format
msgid "Disconnecting from Internet "
msgstr "Diskonektovanje sa Interneta"

#: standalone/net_monitor:149 standalone/net_monitor:162
#, fuzzy, c-format
msgid "Connecting to Internet "
msgstr "Povezivanje na Internet"

#: standalone/net_monitor:193
#, fuzzy, c-format
msgid "Disconnection from Internet failed."
msgstr "Diskonektovanje sa Interneta nije uspelo."

#: standalone/net_monitor:194
#, fuzzy, c-format
msgid "Disconnection from Internet complete."
msgstr "Diskonektovanje za Interneta završeno."

#: standalone/net_monitor:196
#, c-format
msgid "Connection complete."
msgstr "Povezivanje završeno."

#: standalone/net_monitor:197
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"povezivanje neuspelo.\n"
"Proverite vašu konfiguraciju u Mandrake Kontrolnom Centru."

#: standalone/net_monitor:295
#, c-format
msgid "Color configuration"
msgstr "Podešavanje boje"

#: standalone/net_monitor:343 standalone/net_monitor:363
#, c-format
msgid "sent: "
msgstr "poslano: "

#: standalone/net_monitor:350 standalone/net_monitor:367
#, c-format
msgid "received: "
msgstr "primljeno: "

#: standalone/net_monitor:357
#, c-format
msgid "average"
msgstr "prosek"

#: standalone/net_monitor:360
#, c-format
msgid "Local measure"
msgstr "Lokalna mera"

#: standalone/net_monitor:392
#, c-format
msgid "transmitted"
msgstr "prebačeno"

#: standalone/net_monitor:393
#, c-format
msgid "received"
msgstr "primljeno"

#: standalone/net_monitor:411
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Upozorenje, detektovana je još jedna Internet konekcija, možda koristi vašu "
"mrežu"

#: standalone/net_monitor:417
#, c-format
msgid "Disconnect %s"
msgstr "Diskonektuj %s"

#: standalone/net_monitor:417
#, c-format
msgid "Connect %s"
msgstr "Konektuj %s"

#: standalone/net_monitor:422
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "Konfiguracija Internet konekcija"

#: standalone/printerdrake:70
#, fuzzy, c-format
msgid "Loading printer configuration... Please wait"
msgstr "Izmena konfiguracije štampača"

#: standalone/printerdrake:86
#, c-format
msgid "Reading data of installed printers..."
msgstr "Čitam podatke sa instaliranih štampača..."

#: standalone/printerdrake:129
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "Upravljanje korisnicima \n"

#: standalone/printerdrake:143 standalone/printerdrake:144
#: standalone/printerdrake:145 standalone/printerdrake:153
#: standalone/printerdrake:154 standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/_Akcije"

#: standalone/printerdrake:143
#, fuzzy, c-format
msgid "/Set as _Default"
msgstr " (Podrazumevano)"

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/_Izmeni"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/_Briši"

#: standalone/printerdrake:146
#, fuzzy, c-format
msgid "/_Expert mode"
msgstr "Ekspert mod"

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/_Osveži"

#: standalone/printerdrake:154
#, fuzzy, c-format
msgid "/_Add Printer"
msgstr "Štampač"

#: standalone/printerdrake:158
#, fuzzy, c-format
msgid "/_Configure CUPS"
msgstr "Konfigurisanje X-a"

#: standalone/printerdrake:191
#, c-format
msgid "Search:"
msgstr "Traži:"

#: standalone/printerdrake:194
#, c-format
msgid "Apply filter"
msgstr "Primeni filter"

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:212 standalone/printerdrake:219
#, fuzzy, c-format
msgid "Printer Name"
msgstr "Print Queue ime:"

#: standalone/printerdrake:212
#, fuzzy, c-format
msgid "Connection Type"
msgstr "Tip konekcije :"

#: standalone/printerdrake:219
#, fuzzy, c-format
msgid "Server Name"
msgstr "Ime servera:"

#: standalone/printerdrake:225
#, fuzzy, c-format
msgid "Add Printer"
msgstr "Štampač"

#: standalone/printerdrake:225
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "Dodaj korisnika u sistem"

#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Set as default"
msgstr "default"

#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Set selected printer as the default printer"
msgstr "Podesi ovaj štampač kao default"

#: standalone/printerdrake:229
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "Uredi selektovani server"

#: standalone/printerdrake:231
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "Izbriši odabrano pravilo"

#: standalone/printerdrake:233
#, c-format
msgid "Refresh"
msgstr "Osveži"

#: standalone/printerdrake:233
#, c-format
msgid "Refresh the list"
msgstr "Osveži listu"

#: standalone/printerdrake:235
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "Konfigurisanje X-a"

#: standalone/printerdrake:235
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "Promenite sistem za štampanje"

#: standalone/printerdrake:521
#, c-format
msgid "Authors: "
msgstr "Autori"

#: standalone/printerdrake:527
#, fuzzy, c-format
msgid "Printer Management \n"
msgstr "Upravljanje korisnicima \n"

#: standalone/scannerdrake:50
#, fuzzy, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr "Paket %s mora biti instaliran. Da li želite da ga instalirate?"

#: standalone/scannerdrake:54
#, fuzzy, c-format
msgid "Aborting Scannerdrake."
msgstr "Scannerdrake"

#: standalone/scannerdrake:59
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:60
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: standalone/scannerdrake:66 standalone/scannerdrake:459
#, c-format
msgid "Searching for configured scanners ..."
msgstr "Tražim podešene skenere ..."

#: standalone/scannerdrake:70 standalone/scannerdrake:463
#, c-format
msgid "Searching for new scanners ..."
msgstr "Tražim nove skenere ..."

#: standalone/scannerdrake:78 standalone/scannerdrake:485
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "Osvežavanje liste podešenih skenera ..."

#: standalone/scannerdrake:100 standalone/scannerdrake:141
#: standalone/scannerdrake:155
#, fuzzy, c-format
msgid "The %s is not supported by this version of %s."
msgstr "%s nije podržan u ovoj verziji Mandrakelinux-a."

#: standalone/scannerdrake:103
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s pronađen na %s, da li da ga podesim automatski?"

#: standalone/scannerdrake:115
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
"%s se ne nalazi u bazi podataka za skenere, da li želite da ga ručno "
"podesite?"

#: standalone/scannerdrake:130
#, c-format
msgid "Select a scanner model"
msgstr "Izaberite model skenera"

#: standalone/scannerdrake:131
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:132
#, c-format
msgid "Detected model: %s"
msgstr "Detektovani model: %s"

#: standalone/scannerdrake:134
#, c-format
msgid ", "
msgstr ", "

#: standalone/scannerdrake:135
#, c-format
msgid "Port: %s"
msgstr "Port: %s"

#: standalone/scannerdrake:161
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "%s nije podržan u ovoj verziji Scannerdrake."

#: standalone/scannerdrake:169 standalone/scannerdrake:183
#, c-format
msgid "Do not install firmware file"
msgstr ""

#: standalone/scannerdrake:173 standalone/scannerdrake:225
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:174 standalone/scannerdrake:226
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:175 standalone/scannerdrake:229
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:230
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:237
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:198
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "Izaberite datoteku"

#: standalone/scannerdrake:201 standalone/scannerdrake:260
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:224
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:228
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:231
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:256
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "Izaberite datoteku"

#: standalone/scannerdrake:282
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:292
#, c-format
msgid "The %s is unsupported"
msgstr "%s nije podržan"

#: standalone/scannerdrake:297
#, fuzzy, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"Ovaj %s mora biti podešen u printerdrake.\n"
"Možete pokrenuti printerdrake iz Mandrake Kontrolnog Centra iz Hardver "
"sekcije."

#: standalone/scannerdrake:301 standalone/scannerdrake:308
#: standalone/scannerdrake:338
#, c-format
msgid "Auto-detect available ports"
msgstr "Autodetekcija dostupnih portova"

#: standalone/scannerdrake:303 standalone/scannerdrake:349
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Izaberite port na koji je vaš uređaj %s konekovan"

#: standalone/scannerdrake:304
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Napomena: Paralelni portovi ne mogu biti auto-detektovani)"

#: standalone/scannerdrake:306 standalone/scannerdrake:351
#, c-format
msgid "choose device"
msgstr "izaberite uređaj"

#: standalone/scannerdrake:340
#, c-format
msgid "Searching for scanners ..."
msgstr "Tražim skenere ..."

#: standalone/scannerdrake:375
#, fuzzy, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"Vaš %s je podešen.\n"
"Sada možete skenirati vaše dokunete pomoću \"XSane\"programa iz Multimedija/"
"Grafika podmenija iz menija Aplikacije."

#: standalone/scannerdrake:399
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Sledeći skeneri\n"
"\n"
"%s\n"
"su direktno povezani na vaš sistem.\n"

#: standalone/scannerdrake:400
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Sledeći skener\n"
"\n"
"%s\n"
"je direktno povezan na vaš sistem\n"

#: standalone/scannerdrake:403 standalone/scannerdrake:406
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Nema skenera koji su direktno povezani na vašu mašinu.\n"

#: standalone/scannerdrake:420
#, c-format
msgid "Search for new scanners"
msgstr "Tražim nove skenere"

#: standalone/scannerdrake:426
#, c-format
msgid "Add a scanner manually"
msgstr "Ručno instalacija skenera"

#: standalone/scannerdrake:433
#, fuzzy, c-format
msgid "Install/Update firmware files"
msgstr "Izaberite datoteku"

#: standalone/scannerdrake:439
#, c-format
msgid "Scanner sharing"
msgstr "Zajedničko deljenje skenera"

#: standalone/scannerdrake:498 standalone/scannerdrake:663
#, c-format
msgid "All remote machines"
msgstr "Sve udaljene mašine"

#: standalone/scannerdrake:510 standalone/scannerdrake:813
#, c-format
msgid "This machine"
msgstr "Ova mašina"

#: standalone/scannerdrake:550
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Ovde možete izabrati da li želite da skeneri na ovoj mašini treba da budu "
"dostupni na drugim udaljenim mašinama i na kojim udaljenim mašinama."

#: standalone/scannerdrake:551
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Takođe možete odlučiti da li želite da skeneri na udaljenim mašinama budu "
"automatski dostupni na ovoj mašini."

#: standalone/scannerdrake:554
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Skeneri  na ovoj mašini su dostupni za ostale računare"

#: standalone/scannerdrake:556
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Deljenje skenera za hostove: "

#: standalone/scannerdrake:570
#, c-format
msgid "Use scanners on remote computers"
msgstr "Koristi skenere na udaljenim računarima"

#: standalone/scannerdrake:573
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Koristi skenere na hostovima: "

#: standalone/scannerdrake:600 standalone/scannerdrake:672
#: standalone/scannerdrake:822
#, c-format
msgid "Sharing of local scanners"
msgstr "Zajedničko deljenje lokalnih skenera"

#: standalone/scannerdrake:601
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""
"Ovo su mašine  na kojima se nalaze lokalno povezani skener(i) koji bi "
"trebali biti dostupni:"

#: standalone/scannerdrake:612 standalone/scannerdrake:762
#, c-format
msgid "Add host"
msgstr "Dodaj hosta"

#: standalone/scannerdrake:618 standalone/scannerdrake:768
#, c-format
msgid "Edit selected host"
msgstr "Uredi selektovanog hosta"

#: standalone/scannerdrake:627 standalone/scannerdrake:777
#, c-format
msgid "Remove selected host"
msgstr "Ukloni selektovanog hosta"

#: standalone/scannerdrake:651 standalone/scannerdrake:659
#: standalone/scannerdrake:664 standalone/scannerdrake:710
#: standalone/scannerdrake:801 standalone/scannerdrake:809
#: standalone/scannerdrake:814 standalone/scannerdrake:860
#, c-format
msgid "Name/IP address of host:"
msgstr "Ime/IP adresa hosta:"

#: standalone/scannerdrake:673 standalone/scannerdrake:823
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "Izaberite hosta na kojem bi lokalni štampači trebali biti dostupni:"

#: standalone/scannerdrake:684 standalone/scannerdrake:834
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Molim Vas unesete ime hosta ili IP adresu.\n"

#: standalone/scannerdrake:695 standalone/scannerdrake:845
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Ovaj host već postoji na listi, i ne može se ponovo dodati.\n"

#: standalone/scannerdrake:750
#, c-format
msgid "Usage of remote scanners"
msgstr "Korišćenje udaljenih skenera"

#: standalone/scannerdrake:751
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""
"Ovo su mašine i mreže na kojima se nalaze lokalno povezani skeneri koji bi "
"trebali biti dostupni:"

#: standalone/scannerdrake:908
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr "Paket %s mora biti instaliran. Da li želite da ga instalirate?"

#: standalone/scannerdrake:912 standalone/scannerdrake:916
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: standalone/service_harddrake:58
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Neki uređaji u \"%s\" klasi hardvera su uklonjeni:\n"

#: standalone/service_harddrake:59
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:62
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "Neki uređaji su dodani:\n"

#: standalone/service_harddrake:63
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:107
#, c-format
msgid "Hardware probing in progress"
msgstr "Detekcija hardvera u toku"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool ?"
msgstr "Da li hoćete da testirate konfiguraciju?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Izaberite jezik"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Licenca"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Podešavanje miša"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Detekcija hard diska"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Izaberite inst.klasu"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Izaberi tastaturu"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Particionisanje"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Formatiraj particije"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Paketi za instalaciju"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Instaliraj sistem"

#: steps.pm:25
#, c-format
msgid "Root password"
msgstr "Root lozinka"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Dodaj korisnika"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Podesi mrežu"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Instaliraj starter"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Konfigurisanje X-a"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Podesi servise"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Instaliraj update-ove"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Izlaz iz instalacije"

#: ugtk2.pm:1075
#, c-format
msgid "Is this correct?"
msgstr "Da li je ovo ispravno ?"

#: ugtk2.pm:1203
#, c-format
msgid "Expand Tree"
msgstr "Proširi stablo"

#: ugtk2.pm:1204
#, c-format
msgid "Collapse Tree"
msgstr "Skupi stablo"

#: ugtk2.pm:1205
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Birajte: ravno ili grupno sortirano"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""

#: wizards.pm:99
#, fuzzy, c-format
msgid "Installation failed"
msgstr "Instalacija teme nije uspela!"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Radna(Office) stanica"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Office programi: tekst procesori (kword, abiword), tabele (kspread, "
"gnumeric), pdf preglednici, itd"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Stanica za igru"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimedijalna stanica"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Programi za puštanje zvuka i videa"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internet stanica"

#: ../../share/compssUsers:999
#, fuzzy
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za "
"pretraživanje Interneta"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Mrežni kompjuter, (klijent)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klijenti za različite protokole uključujući i ssh"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfiguracija"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Alati za lako konfigurisanje kompjutera"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konzolni alati"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "editori,šelovi, alati za datoteke, terminali"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE padna stanica"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop okruženje, osnovno grafičko okruženje sa kolekcijom pratećih alata"

#: ../../share/compssUsers:999
msgid "GNOME Workstation"
msgstr "Gnome radna stanica"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Grafička okruženja za setom korisničk NFS server, SMB server, Proxy server, "
"NFS server, SMB server, Proxy serverih aplikacija i desktopalata"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Drugi grafički desktopovi"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C i C++ razvojne biblioteke, programi  i propratne datoteke"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentacija"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr "LSB"

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr "Linux-ova Standardna Baza. Podrška za Third party aplikaicje"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Server, Web/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Mail"
msgstr "Pošta"

#: ../../share/compssUsers:999
msgid "Postfix mail server"
msgstr "Postfix mail server"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Server,Baze podataka"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL ili MySQL server za bazu podataka"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Server, Firewall/Router"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internet gateway"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Mrežni Server"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, SSH server"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Skup alata za čitanje i slanje el.pošte i vesti (pine, mutt, tin..) i za "
"pretraživanje Interneta"

#~ msgid "XawTV isn't installed!"
#~ msgstr "XawTV nije instaliran!"

#~ msgid "Provider dns 1 (optional)"
#~ msgstr "Provajderov dns 1 (opciono)"

#~ msgid "Provider dns 2 (optional)"
#~ msgstr "Provajderov dns 2 (opciono)"

#~ msgid "Ethernet Card"
#~ msgstr "Mrežna kartica"

#~ msgid "DHCP Client"
#~ msgstr "DHCP klijent"

#, fuzzy
#~ msgid "Display"
#~ msgstr "dnevno"

#, fuzzy
#~ msgid "Display configuration"
#~ msgstr "LAN konfiguracija"

#~ msgid ""
#~ "Change\n"
#~ "Restore Path"
#~ msgstr ""
#~ "Promeni\n"
#~ "putanju za Obnavljanje"

#~ msgid "European protocol"
#~ msgstr "Evropski protokol"

#~ msgid "Found \"%s\" interface do you want to use it ?"
#~ msgstr "Pronađen je \"%s\" interfejs, da li želi te da ga koristite ?"

#~ msgid "What kind is your ISDN connection?"
#~ msgstr "Kakva je vrsta vaše ISDN kenekcije ?"

#, fuzzy
#~ msgid "Do you want to start a new configuration ?"
#~ msgstr "Da li hoćete da testirate konfiguraciju?"

#~ msgid ""
#~ "I have detected an ISDN PCI card, but I don't know its type. Please "
#~ "select a PCI card on the next screen."
#~ msgstr ""
#~ "Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
#~ "karticu na sledećem ekranu."

#~ msgid "No ISDN PCI card found. Please select one on the next screen."
#~ msgstr ""
#~ "Nije pronađena ISDN PCI kartica. Izaberite jednu na sledećem ekranu."

#~ msgid "Under Devel ... please wait."
#~ msgstr "U razvoju ... molim Vas sačekajte"

#~ msgid "Windows (FAT32)"
#~ msgstr "Windows(FAT32)"

#, fuzzy
#~ msgid ""
#~ "Enter your CD Writer device name\n"
#~ " ex: 0,1,0"
#~ msgstr ""
#~ "Unesite ime vašeg CD Writer uređaja\n"
#~ " ex: 0,1,0"

#~ msgid "Scientific Workstation"
#~ msgstr "Naučna radna stanica"

#~ msgid "Scientific applications such as gnuplot"
#~ msgstr "Naučne aplikacije kao što je gnuplot"

#~ msgid "DNS/NIS "
#~ msgstr "DNS/NIS "

#~ msgid "Domain Name and Network Information Server"
#~ msgstr "Ime Domena i Mrežni Informacioni Server"

#, fuzzy
#~ msgid "No wireless network adapter on your system!"
#~ msgstr "Nema mrežnog adaptera u vašem sistemu !"

#, fuzzy
#~ msgid "Can't create log file!"
#~ msgstr "Ne mogu da kreiram katalog!"

#~ msgid "Please select media for backup..."
#~ msgstr "Izaberite medij koji želite da korisitite za backup..."

#~ msgid "Configuration of a remote printer"
#~ msgstr "Podešavanje udaljenog štampača"

#~ msgid "Gnome Workstation"
#~ msgstr "Gnome radna stanica"

#~ msgid "Running \"%s\" ..."
#~ msgstr "Pokrećem \"%s\" ..."

#~ msgid "utopia 25"
#~ msgstr "utopia 25"

#~ msgid "On Hard Drive"
#~ msgstr "na Hard Disk"

#~ msgid "Messages"
#~ msgstr "Poruke"

#~ msgid "Syslog"
#~ msgstr "Dzyslog"

#~ msgid "Compact"
#~ msgstr "Kompakt"