# Cirilicni prevod drakbootdisk.po fajla.
# Copyright (C) 1997-2003 MandrakeSERBIA.
# Tomislav Jankovic <tomaja@net.yu>, 2000.
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2003-09-16 13:45+0200\n"
"PO-Revision-Date: 2003-02-28 18:21+0100\n"
"Last-Translator: Toma Jankovic_<tomaja@net.yu>\n"
"Language-Team: Serbian <i18n@mandrake.co.yu>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-2\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Skeniranje particija za pronala�enje ta�ke montiranja"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
"ukoliko je pode�eno na da, ozna�ite dodavanje/uklanjanje za suid root "
"fajlove."

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tErase=%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "network printer port"
msgstr "port mre�nog �tampa�a"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr "Ubacite disketu:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "DrakTermServ"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Pohranjena(snimljena) tabela particija nije iste veli�ine\n"
"�elite da nastavite ?"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "Koje korisni�ko ime"

#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Koju vrstu unosa dodajete ?"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "Obnovi tabelu particija"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "Pode�avanje mi�a"

#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Na CUPS server \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "Postinstalaciona konfiguracija"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"The current security level is %s\n"
"Select permissions to see/edit"
msgstr ""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "Umesto toga probajte ``%s''"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "Tip"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Tako�e, �tampa�i konfigurisani sa PPD fajlovima koji poti�u od proizvo�a�a "
"ili sa osnovnim CUPS drajverima ne mogu biti preba�eni."

#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr "�ri Lanka"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Slede�i �tama�r\n"
"\n"
"%s%s\n"
"je direktno povezan na va� sistem"

#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "Centralno Afri�ka Republika"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "Gateway ure�aj"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Advanced preferences"
msgstr "Napredne opcije"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Net Method:"
msgstr "Mre�ni metod:"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Ethernetcard"
msgstr "Mre�na kartica"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
"ukoliko je pode�eno, po�aljite izve�taj na ovu email adresu uli je po�aljite "
"root-u."

#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "Parametri"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "no"
msgstr "Info"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "Auto-detekcija"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface:"
msgstr "Interfejs:"

#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "Izaberite inst.klasu"

#: ../../network/tools.pm:1
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Izgleda da sistem nije konektovan na Internet.\n"
"Probajte da promenite konfiguraciju."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Pove�ite va� �tampa� na Linux server i dozvolite va�oj Windows ma�ini(ama) "
"da se konektuje na nju kao klijent.\n"
"\n"
"Da li zaista �elite da nastavite da pode�avate ovaj �tampa� kao �to to sada "
"radite?"

#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "Beolorusija"

#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr "Gre�ka kod unosa u datoteka %s"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Report check result to syslog"
msgstr "ukoliko je pode�eno na da, po�aljite izve�taj o proveri u syslog."

#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd se koristi za pra�enje statusa baterije i logovanje preko syslog.\n"
"Koristi se i za ga�enje ma�ine (radi i na desktop ma�inama) kada je baterija "
"slaba"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tape to backup"
msgstr "Koristi traku za backup"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "Slede�i paketi treba da budu instalirani"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "CUPS konfiguracija"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Total progress"
msgstr "Ukupan napredak"

#: ../../lang.pm:1
#, c-format
msgid "Hong Kong"
msgstr "Hong Kong"

#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "Preme�tanje"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko %s:\n"
"\n"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "yes"
msgstr "Da"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "("
msgstr "("

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Dobrodo�li u program za Pode�avanje Mre�ne konekcije\n"
"\n"
"Sada treba da konfiguri�emo va�u internet/mre�nu konekciju.\n"
"Ukoliko ne �elite auto detekciju, deselektujte opciju.\n"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid ")"
msgstr ")"

#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "Liban"

#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "Stop"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Edit selected host"
msgstr "Uredi selektovanog hosta"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD device defined!"
msgstr "Nije odre�en CD ure�aj!"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "Koristi quota zar backup fajlove"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Bugarski (fonetski)"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP start ip"
msgstr "DHCP startni ip"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Don't rewind tape after backup"
msgstr "Koristi traku za backup"

#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Glavne opcije startera"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Tape"
msgstr "Traka"

#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr "Malezija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning network..."
msgstr "Skeniram mre�u ..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"Sa ovom opcijom mo�i �ete da obnovite bilo koju verziju\n"
" va�eg /etc direktorijuma."

#: ../../standalone/drakedm:1
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr "Mre�a mora da se restartuje. Da li �elite da je restartujete ?"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "�vajcarski (Francuski  raspored)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "August"
msgstr "Avgust"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid neuspelo (mo�da nedostaje raidtools ?)"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr "Veb kamera"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "size of the (second level) cpu cache"
msgstr "Veli�ina (drugi nivo) procesorskog ke�a"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Soundcard"
msgstr "Zvu�na kartica"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Month"
msgstr "Mesec"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "Izaberitedrugi medij za obnavljanje sa"

#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr "Luksemburg"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Da bi �tampali fajl iz komandne linije (prozora terminala) koristite komandu "
"\"%s <fajl>\".\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "Nivo %s\n"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Syriac (phonetic)"
msgstr "Jermenski (fonetski)"

#: ../../lang.pm:1
#, c-format
msgid "Iran"
msgstr "Iran"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus"
msgstr "Bus"

#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "Irak"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "connecting to %s ..."
msgstr "konektujem se na Bugzilla �arobnjak ..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring..."
msgstr "Konfiguracija u toku..."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, and it's currently enabled."
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno i trenutno je "
"omogu�eno."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Za ve�inu modernih TV kartica, bttv modul GNU/Linux kernela jednostavno auto-"
"detektuje prave parametre.\n"
"Ukoliko je kartica pogre�no detektovana, ovde mo�ete da podesite pravi "
"tjuner i tip kartice. Samo selektujte parametre za va�u TV karticu ako je "
"potrebno"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "Lozinka (ponovite)"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search installed fonts"
msgstr "Tra�i instalirane fontove"

#: ../../standalone/drakboot:1
#, fuzzy, c-format
msgid "Default desktop"
msgstr "Podrazumevano"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""
"Da bi prijavili bag, kliknite na taster prijava.\n"
"Ovo �e otvoriti prozor web pretra�iva�a sa adresom %s\n"
" gde �e te prona�i formular koji treba da popunite.Informacija koja je gore "
"prokazana �e biti \n"
"preba�ena na taj server."

#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr "Venecuela"

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr "IP adresa"

#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "Izaberite veli�inu"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Lista korumpiranih podataka:\n"
"\n"

#: ../../fs.pm:1
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Sistem ne podr�ava va� modem.\n"
"Drajver potra�ite na http://www.linmodems.org"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "Izaberite drugu particiju"

#: ../../standalone/drakperm:1
#, c-format
msgid "Current user"
msgstr "Trenutni korisnik"

#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "Korisni�ko ime"

#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "Levi \"Windows\" taster"

#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "Gvajana"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Server Configuration"
msgstr "dhcpd Server konfiguracija"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Kori��eno z direktorijum:\n"
" samo vlasnik direktorijuma ili fajla u ovom direktorijumu ga mo�e izbrisati"

#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "na Novell serveru \"%s\", �tampa� \"%s\""

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Printer Name"
msgstr "Print Queue ime:"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
msgstr "Ukloni modul"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "Lozinka"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Advanced Configuration"
msgstr "Napredna Konfiguracija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "Skeniranje na va�em HP multi-funkcionalnom ure�aju"

#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Izaberi postoje�i RAID za dodavanje"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Turski (moderni \"Q\" model)"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
msgstr "Lilo poruka nije prona�ena"

#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "if needed"
msgstr "ukoliko je potrebno"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Failed..."
msgstr "Obnova neuspela..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _jazz drives"
msgstr "/Autodetekcija _jazz ure�aja"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Upoznavanje\n"
"\n"
"Operativni sistem i druge komponente dostupne u Mandrake Linux "
"distribuciji \n"
"na dalje �e biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
"uklju�uju, ali nisu i \n"
"ograni�eni na, skup programa, metoda, pravila i dokumentaciju koja je "
"vezanaza operativni \n"
"sistem i druge komponente Mandrake Linux distribucije.\n"
"\n"
"\n"
"1. Licencni ugovor\n"
"\n"
"Pa�ljivo pro�itajte ovaj dokument. Ovaj dokument je licencni ugovor "
"izme�uizme�u vas i   \n"
"MandrakeSoft S.A. koji pola�e pravo na Softverske Proizvode.\n"
"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
"vidu, vi eksplicitno \n"
"prihvatate i potpuno se sla�ete sa prihvatanjem postavki i uslova i stanja u "
"ovoj Licenci. \n"
"Ukoliko se ne sla�ete sa bilo kojim delom Licence, nemate pravo da "
"instalirate, kopirate ili koristite \n"
"Softverske proizvode. \n"
"Bilo koji poku�aj instalacije, dupliciranja ili upotrebe Softverskih "
"Proizvoda na na�in koji se ne sla�e sa \n"
"postavkama i uslovima ove Licence �e voditi gubitku va�ih prava pod ovom \n"
"Licencom. Na osnovu gubitka Licence, morate odmah uni�titisve kopije \n"
"Softverskih Proizvoda.\n"
"\n"
"\n"
"2. Ograni�ena Garancija\n"
"\n"
"Softverski Proizvodi i prate�a dokumentracija su omogu�ene \"kao takve\", i "
"bez garancije, do granica \n"
"koje su dozvoljene zakonom.\n"
"MandrakeSoft S.A. ne�e, u svim uslovima i u granicama zakona, biti ogovoran "
"za bilo koje specijalne,\n"
"slu�ajne, direktne ili indirektne �tete (uklju�uju�i neograni�ene�tete ili "
"gubitke \n"
"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tra�nje i "
"kazne koje su rezultat sudske \n"
"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
"nemogu�nosti kori��enja Softverskih \n"
"Proizvoda, �ak iako je MandrakeSoft S.A. savetovao i ukazivao na mogu�nost "
"pojave takve \n"
"�tete.\n"
"\n"
"Ograni�ena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
"softvera u nekim zemljama\n"
"\n"
"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
"distributeri ne�e, ni pod kojim uslovima, biti \n"
"odgovorni za specijalne, namerne direktne ili indirektne �tete(uklju�uju�i "
"neograni�ene \n"
"�tete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
"zakonske tra�nje \n"
"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
"proizilaze \n"
"iz upotrebe ili nemogu�nosti kori��enja Softverskih Komponenti ili koje "
"proizilaze download-ovanih softverskih komponenti \n"
"bilo kog Mandrake Linux sajta koji su zabranjeni ili ograni�eni u nekim "
"zemljama po lokalnim zakonima.\n"
"Ova ograni�ena prava se primenjuju, ali nisu i ograni�ena na,kriptografske "
"komponente \n"
"koje se nalaze u Softverskim Proizvodima.\n"
"\n"
"\n"
"3. GPL i za nju vezane Licence\n"
"\n"
"Softverski proizvodi se sastoje od komponenti kreiranih od strane razli�tih "
"lica ili entiteta. Ve�ina  \n"
"od ovih komponenti se nalaze pod postavkama i uslovima GNU Op�te Javne \n"
"Licence, koja se od sada zove  \"GPL\", ili sli�ne licence. Ve�ina ovih "
"licenci dozvoljava upotrebu, \n"
"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
"Molimo Vas da pa�ljivo pro�itte postavke \n"
"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
"komponenete. Bilo koje pitanje \n"
"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
"nena MandrakeSoft.\n"
"Programi koje je razvio MandrakeSoft S.A. podle�u pod GPL Licencu. "
"Dokumentacija pisana od \n"
"strane MandrakeSoft S.A. podle�e pod posebnu licencu. Molim da pogledate "
"dokumentaciju  \n"
"za detalje.\n"
"\n"
"\n"
"4. Prava na Intelektualnu svojinu\n"
"\n"
"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
"ona \n"
"su za�ti�ena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
"na softverske programe.\n"
"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
"SoftverskihProizvoda, kako za celinu tako i za \n"
"delove, za sve sve svrhe i sve upotrebe.\n"
"\"Mandrake\", \"Mandrake Linux\" i pridru�eni logotipi i oznake MandrakeSoft "
"S.A.  \n"
"\n"
"\n"
"5. Zakonska prava \n"
"\n"
"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
"odluke, ovaj \n"
"deo se isklju�uje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
"ovog\n"
"ugovora.\n"
"Postavke i uslovi ove Licence su odre�eni Zakonima Francuske.\n"
"Svi nesporazumi bi trebali biti re�eni van suda. Kao poslednje \n"
"sredstvo, nesporazumi �e biti upu�eni na odgovaraju�e Sudske ustanove u "
"Parizu - Francuska.\n"
"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
"MandrakeSoft S.A.  \n"

#: ../../standalone/drakboot:1
#, fuzzy, c-format
msgid "Default user"
msgstr "Default �tampa�"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"x koordinata trake sa prikazom napretka\n"
"od svog gornjeg levog ugla"

#: ../../standalone/drakgw:1
#, c-format
msgid "Current interface configuration"
msgstr "Trenutna konfiguracija interfejsa"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Demon"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Ukoliko imate ISA karticu, vrednosti na slede�em ekranu bi trebale biti "
"ispravne.\n"
"\n"
"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za va�u karticu.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "Nemoj da �tampaj bilo koju test stranicu"

#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr "Gurmuki"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s already in use\n"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Obavezno No APIC"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Ova lozinka je suvi�e jednostavna (treba da ima bar %d znakova)"

#: ../../standalone.pm:1
#, c-format
msgid "[keyboard]"
msgstr "[keyboard]"

#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install List"
msgstr "Instaliraj listu"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Change\n"
"Restore Path"
msgstr ""
"Promeni\n"
"putanju za Obnavljanje"

#: ../../standalone/logdrake:1
#, c-format
msgid "Show only for the selected day"
msgstr "Prika�i samo za izabrani dan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Logs"
msgstr "Logovi"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Napomena: Paralelni portovi ne mogu biti auto-detektovani)"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "Kakvu vrstu kartice imate?"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "Sigurnost"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Tako�e mo�ete da koristite i grafi�ki interfejs \"xpdq\" za opcije za "
"pode�avanje poslova �tampanja.\n"
"Ako koristite KDE kao desktop okru�enje imate \"pani�no dugme\", ikonicu na "
"desktopu, ozna�enu sa \"ZAUSTAVI �tampa�!\",koji zaustavlja sve poslove "
"�tampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se "
"zaglavi papir.\n"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Izaberite podatke za obnavljanje..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Unknown"
msgstr "Nepoznato"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Ovaj server ve� postoji na listi, i ne mo�e se ponovo dodati.\n"

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "Pode�avanje mre�e"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol za Ostatak sveta \n"
" bez D-kanala (zakupljene linije)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr "Opcija %s mora biti broj!"

#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "Napomena"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Niste podesili X. Da li ste sigurni da �elite to?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Pode�avanje �tampa�a �e biti potpuno automatsko. Ukoliko va� �tampa� nije "
"ispravno detektovan ili �elite da sami pode�avate �tampa�, uklju�ite \"Ru�na "
"konfiguracija\"."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "Koju vrstu particioniranja?"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""
"lista fajlova poslana preko FTP-a: %s\n"
" "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface"
msgstr "Interfejs"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Multisession CD"
msgstr " (multi-sesija)"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "odvojeni stringovi sa zarezom"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""
"Ovo su ma�ine i mre�e na kojima se nalaze lokalno povezani skeneri koji bi "
"trebali biti dostupni:"

#: ../../standalone/logdrake:1
#, c-format
msgid "Messages"
msgstr "Poruke"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Nepoznati|CPH06X (bt878) [mnogi proizvo�a�i]"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "POP i IMAP Server"

#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr "Meksiko"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model stepping"
msgstr "Model stepping"

#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr "�vajcarska"

#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "Bruneji Darussalam"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Imate li jo� %s interfejsa?"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "You must be root to read configuration file. \n"
msgstr "Backup-uj sada iz konfiguracionog fajla"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opcije za udaljeni lpd"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the username. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"%s\".\n"
"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux je vi�ekorisni�ki sistem, a to zna�i da svaki korisnik mo�e imati "
"sopstvene\n"
"postavke, sopstvene fajlove, itd. Mo�ete pro�itati ``Upustvo za korisnike''\n"
"da bi saznali vi�e o tome. Ali za razliku od \"root\", koji je ustvari "
"administrator, korisnici\n"
"koje dodate ovde ne�e mo�i da menjaju bilo �ta osim njihovih\n"
"fajlova i njihove konfiguracije. Trebalo bi da kreirate najmanje jednog\n"
"obi�nog korisnika za sebe. Taj ra�un je onaj na koji treba da se logujete \n"
"za rutinsko kori��enje. Iako je veoma prakti�no da se ulogujete kao \"root\" "
"svaki dan,\n"
"to mo�e biti veoma opasno! I najmanja gre�ka mo�e zna�iti da va� sistem\n"
"ne�e vi�e raditi. Ukoliko napravite ozbiljne gre�ke kao obi�ni korisnik \n"
"mo�ete jedino izbgubiti ne�to informacija, ali ne i celi sistem.\n"
"\n"
"Prvo, morate da unesete va�e pravo ime. Ovo nije neophodno, naravno -\n"
"jer mo�ete pristupiti i izmeniti ga kada god �elite. DrakX �e tada uzeti "
"prvu\n"
"re� koji ste uneli i staviti ga u prostor za uno�enje imena korisnika "
"\"User\n"
"name\". Ovo je ime koje odre�eni korisnik treba da koristi pri logovanju na\n"
"sistem. Mo�ete ga promeniti. YNakon toga morate uneti lozinku ovde.\n"
"Obi�ni, ne-privilegovani korisni�ka lozinka nije od ve�eg zna�aja kao ona "
"za\n"
"\"root\" koriosnika sa sigurnosne ta�ke gledanja, ali to nije razlog za "
"opu�tanje\n"
"- nakon svega, va�i fajlovi su u pitanju.\n"
"\n"
"Ukoliko kliknete na \"Prihvati korisnikar\", mo�ete dodati jo� korisnika. "
"Dodajte\n"
"korisnika za svakog va�eg prijatelja: za va�eg oca ili sestru, na\n"
"primer. Kada zar�ite dodavanje svih �eljenih korisnika, izaberite \"Zavr�eno"
"\".\n"
"\n"
"Klikom na taster Napredno \"Napredno opcije\" mo�ete izmeniti default \"shell"
"\"\n"
"za trenutnog korisnika (bash po default). \n"
"\n"
"Kada zavr�ite sa dodavanjem korisnika, ra�unar �e tra�iti da izaberete "
"korisnika\n"
"koji �e se automatski prijavljivati na sistem pri njegovom startanju. "
"Ukoliko\n"
"vas zanima ova mogu�nost (i ne vodite mnogo ra�una o lokalnoj\n"
"sigurnosti), izaberite �eljenog korisnika i window mena�er, a zatim kliknite "
"na \"Slede�i\n"
"->\". Ukoliko niste zainteresovani za ovu opciju, deselektujte  \"Da li "
"�elite\n"
"da koristite ovu opciju?\" ."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Internet Access..."
msgstr "Podesi Internet pristup..."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr ""
"Izaberite vremenski interval \n"
"izme�u svakog backup-a"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "Norve�ka"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Delete profile"
msgstr "Ukloni profil..."

#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "Danski"

#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Automatski uklju�uje numlock taster pod konzolom\n"
"i u XFree pri startanju."

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Molim unesite IP konfiguraciju za ovu ma�inu.\n"
"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
"IP adresa (na primer, 123.45.67.89)."

#: ../../help.pm:1
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"Mandrake Linux instalacija se nalazi na nekoliko diskova iliti CDROM-ova. "
"DrakX\n"
"zna ukoliko da ukoliko je selktovani paket lociran na drugom CDROM-u i "
"izbaci�e\n"
"trenutni CD te tra�iti od vas da ubacite odgovaraju�i."

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "When checked, owner and group won't be changed"
msgstr "kada je selektovana, vlasnik i grupa ne mogu biti promenjeni"

#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "Bugarska"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Tuesday"
msgstr "Utorak"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Processors"
msgstr "Procesori"

#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard and Jan Mayen Islands"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No NIC selected!"
msgstr "Nijedan NIC nije selektovan!"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Pojavili su se problemi tokom konfiguracije.\n"
"Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko va�a konekcija "
"ne radi, treba da ponovite konfiguraciju"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "particija %s je sada poznata kao %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Other files..."
msgstr "backup-ovanje ostalih fajlova..."

#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Kongo (Kin�asa)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "SMB server IP:"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabela particija za ure�aj %s �e biti zapisana na disk!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing HPOJ package..."
msgstr "Instaliram HPOJ paket..."

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
"LILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni LILO, ili "
"LILO ne\n"
"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
"Da li biste da kreirate startnu disketu za va� sistem? %s"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      DrakBackup Daemon Izve�taj\n"
"\n"
"\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "Letonski"

#: ../../standalone/drakbackup:1
#, c-format
msgid "monthly"
msgstr "mese�no"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Module name"
msgstr "Ime modula"

#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "Pokreni pri startanju"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Use Incremental Backups"
msgstr ""
"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"

#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prvi sektor diska (MBR)"

#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr "D�ojstik"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "DVD"
msgstr "DVD-ROM"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr "Koristi Unicode po default-u"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "modul GNU/Linux kernela koji upravlja tim ure�ajem"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "Spasavanje tabele particija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Opcija %s mora biti broj!"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Use password to authenticate users"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Unosi koje treba da popunite:\n"
"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: ../../standalone/livedrake:1
#, c-format
msgid "Unable to start live upgrade !!!\n"
msgstr "Ne mogu da startujem live upgrade !!!\n"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "Ime: "

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 miliona boja (24-bitna paleta)"

#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "Dozvoli sve korisnike"

#: ../../share/advertising/08-store.pl:1
#, c-format
msgid "The official MandrakeSoft Store"
msgstr "Zvani�ni MandrakeSoft market"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "Promena veli�ine (resizing)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Enter the maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Unesite maksimalnu veli�inu\n"
" dozvoljenu za Drakbackup"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "Kablovska konekcija"

#: ../../standalone/drakperm:1 ../../standalone/logdrake:1
#, c-format
msgid "User"
msgstr "Korisnik"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Name"
msgstr "Ime "

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid neuspelo"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulaci�a 3 tastera"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check additions/removals of sgid files"
msgstr "ukoliko je pode�eno na da, ozna�ite dodavanje/uklanjanje sgid fajlova."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files..."
msgstr "�aljem fajlove..."

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Jevrejski (Fonetski)"

#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "pristup rpm alatima"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Morate iabrati/uneti �tampa�/ure�aj!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission problem accessing CD."
msgstr "Problemi sa dozvolama pristupa za CD."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "Broj telefona"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Gre�ka: drajver \"%s\" za  va�u zvu�nu karticu nije prikazan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "Ime, opis i lokacija �tampa�a"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (broadcast)"
msgstr "USA (broadcast)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "Koristi Xinerama ekstenziju"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: ../../standalone/drakxtv:1
#, c-format
msgid "West Europe"
msgstr "Zapadna Evropa"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On CD-R"
msgstr "na CD ure�aju"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPCIJE:\n"
"  --help            - prikazuje ovaj tekst koji sada �itate.\n"
"  --report          - program treba da bude jedan od mandrake alata\n"
"  --incident        - program treba da bude jedan od mandrake alata"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake2 version %s"
msgstr "Harddrake2 verzija %s"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Preferences"
msgstr "Karakteristike: "

#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr "Svazilend"

#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "Dominikanska Republika"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "Kopiranje %s"

#: ../../standalone/draksplash:1
#, c-format
msgid "Choose color"
msgstr "Izaberite boju"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Syriac"
msgstr "Sirija"

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-UID"
msgstr "Podesi-UID"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on this partition\n"
"will be lost and will not be recoverable!"
msgstr ""
"Izaberite hard disk koji �elite da izbri�ete da bi instalirali novu Mandrake "
"Linux \n"
"particiju. Budite pa�ljivi, svi podaci na njemu �e biti izgubljeni\n"
"i ne�e se mo�i povratiti!"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Koristi  %c i %c slova da bi oznacili izbor"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Generi�ki 2 tastera mi�"

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Ukloni prvo logi�ke volumene\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Oznaceni izbor se podize automatski za %d sekundi"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"Ne mogu da upi�em u /etc/sysconfig/bootsplash\n"
"Fajl ne postoji."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet access"
msgstr "Internet pristup"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"y koorditnata tekst boksa\n"
"u broju karaktera"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Da bi dobili listu dostupnih opcija za trenutni �tampa� kliknite na taster "
"\"Lista opcija �tampa�a\"."

#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
msgstr ">Omogu�avam servisi..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "�tampam test stran(ice)u..."

#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Ve� postoji particija sa ta�kom montiranja %s\n"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i msec proveru sigurnosti na svaki �as."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
"partition. Resizing can be performed without the loss of any data, provided\n"
"you have previously defragmented the Windows partition and that it uses the\n"
"FAT format. Backing up your data is strongly recommended.. Using this\n"
"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
"Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrake Linux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
"Guide''."
msgstr ""
"U ovom trenutku, morate da izaberete gde �ete instalirati\n"
"Mandrake Linux operativni sistem na va� hard disk. Ukoliko je prazan ili\n"
"postoje�i operativni sistem koristi sav postoje�i prostor na disku, treba da "
"ga\n"
"particionirate. U osnovi, particioniranje hard diska se sastoji logi�kog\n"
"deljenja da bi obezbedili prostor za instalaciju va� novi Mandrake Linux "
"sistem.\n"
"\n"
"Po�to su efekti procesa particioniranja obi�no nepovratni,\n"
"particioniranje mo�e biti prili�no stresan proces za neiskusne korisnike.\n"
"Ovaj �arobnjak ga pojednostavljuje. Pre po�etka, konsultujte upustvo i ne "
"�urite.\n"
"\n"
"Ukoliko ste pokrenuli instalaciju u Ekspert modu, pokrenu�ete\n"
"DiskDrake, Mandrake Linux-ov alat za particije, koji vam dozvoljavaw da\n"
"fino podesite va�e particije. Pogledajte DiskDrake sekciju u ``User "
"Guide''.\n"
"Iz instalacionog interfejsa, mo�ete koristiti �arobnjake kao �to je opisano "
"ovde\n"
"klikom na dijalogov \"�arobnjak\" taster.\n"
"\n"
"Ukoliko su particije ve� kreirane, od predhodne instalacije \n"
"ilikreirane drugim alatom za particioniranje, morate izabrati \n"
" na koje od njih �ete instalirati Linux sistem.\n"
"\n"
"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
"Da bi to uradili, mo�ete da koristite gore postavljeni �arobnjak. U "
"zavisnosti \n"
"od konfiguracije hard diska, postoji nekoliko mogu�nosti:\n"
"\n"
" * \"Koristi slobodan prostor\": ova opcija �e jednostavno dovesti do  "
"automatskog\n"
"particioniranja va�eg praznog(ih) diska(ova). Ne�e vam biti postavljana "
"daljna pitanja;\n"
"\n"
" * \"Koristi postoje�e particije\": �arobnjak je detektovao jednu ili vi�e \n"
"postoje�ih Linux particija na va�em hard disku. Ukoliko\n"
"�elite da njihj koristite, izaberite ovu opciju.\n"
"\n"
" * \"Koristi slobodan prostor na Windows particiji\": ukoliko je Microsoft "
"Windows\n"
"instaliran na va�em disku i on zauzima sav postoje�i prostor na njemu,\n"
"mora�ete da kreirate slobodan prostor za Linux. Da bi to uradili, mo�ete "
"izbrisati\n"
"Microsoft Windows particiju i podatke (pogledajte `Brisanje celog diska'' "
"ili ``Ekspert\n"
"mod'' opcije) ili da promenite veli�inu Microsoft Windows particije. Promena "
"veli�ine\n"
"se mo�e isvesti bez gubljenja podataka, ali se pteporu�uje da prvo "
"defragmentirate\n"
"Windows particiju iz samog Windows-a. Backup podataka tako�e nije lo�a "
"ideja..\n"
"Ovo re�enje se preporu�uje ukoliko �elite da koristite Mandrake Linux i\n"
"Microsoft Windows na istom kompjuteru.\n"
"\n"
"   Pre nego �to izaberete ovu opciju, morate da razumete da nakon ove "
"procedure\n"
"veli�ina va�e Microsoft Windows particije �e biti manja\n"
"u odnosu na trenutno stanje. Ima�ete manje slobodnog prostora u Microsoft\n"
"Windows-u za sme�tanje podataka ili instalaiju novog softvera;\n"
"\n"
" * \"Brisanje cvelog diska\": ukoliko �elite da izbri�ete sve podatke i sve\n"
"particije koji postoje na va�em hard disku i zamenite ih va�im\n"
"novim Mandrake Linux sistemom, mo�ete da izaberete ovu ociju. Budite\n"
"pa�ljivisa ovom opcijom, jer ne�ete biti u mogu�nosti\n"
"da povratite staro stanje nakon potvrde.\n"
"\n"
"   !! Ukoliko izaberete ovu opciju, svi podaci na disku �e biti "
"izgubljeni. !!\n"
"\n"
" * \"Ukloni Windows\": ova opcija �e jednostavno izbrisati sve sa hard diska "
"i\n"
"kreirati nove particije. Svi podaci na va�em disku\n"
"�e biti izbrisani;\n"
"\n"
"   !! Ukoliko izaberete ovu opciju, svi podaci na disku �e biti "
"izgubljeni. !!\n"
"\n"
" * \"Custom particionisanje diska\": izaberite ovu opciju ukoliko �elite\n"
"da ru�no va� hard disk. Budite pa�ljivi -- ovo je mo�an\n"
"ali opasan izbor i vrlo lako mo�ete izgubiti svoje podatke. Zbog toga se\n"
"ova opcija preporu�uje samo onima koji imaju iskustva\n"
"od ranije. Za vi�e podataka o tome kako da koristite\n"
"program DiskDrake, pogledajte poglavlje ``Upravljajte svojim particijama '' "
"u\n"
"``Po�etni�ki vodi�''."

#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr "Ukrajina"

#: ../../standalone/drakbug:1
#, c-format
msgid "Application:"
msgstr "Aplikacija:"

#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr "Eksterni ISDN modem"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "ukoliko ka�ete da, po�aljite rezultat provere mail-om."

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "Va� izbor ? (po default-u %s) "

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr "Pomo� "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Test stran(ice)a je poslana �tampa� demonu.\n"
"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"
"Status �tampa�a:\n"
"%s\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "daily"
msgstr "dnevno"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and one unknown printer"
msgstr "i jedan nepoznati �tampa�"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "Irska"

#: ../../standalone/drakbackup:1
#, c-format
msgid "         Restore Configuration       "
msgstr "        Obnavljanje Konfiguracije         "

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Is this the correct setting?"
msgstr "Da li je ovo ispravno pode�eno?"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Sada treba da podesite va�u Internet/mre�nu konekciju. Ukoliko\n"
"�elite da konektujete svoj kompjuter na Internet ili na lokalnu mre�u, "
"kliknite\n"
"\"Slede�i ->\". Nakon toga �e se pokrenuti autodetekcija mre�nih ure�aja i "
"modema. Ukoliko\n"
"ova autodetekcija ne uspe, deselektujte \"Koristi autodetekciju\" slede�i "
"put.Vi\n"
"tako�e mo�ete izabrati da ne pode�avate mre�u sada , nego kasnije; u tom "
"slu�aju,\n"
"jednostavno kliknite na taster \"Poni�ti\".\n"
"\n"
"Ovaj program nudi pode�avanje Internet konekcije u\n"
"toku instalacije. Mogu�e konekcije su: tradicionalni modem, ISDN\n"
"modem, ADSL konekcija, kablovski modem, i na kraju jednostavna LAN "
"konekcija\n"
"(Ethernet).\n"
"\n"
"Ovde ne�emo detaljno opisivati svaku konfiguraciju. Jednostavno proverite da "
"li imate\n"
"sve parametre, kao �to su IP adresa, default gateway, DNS serveri, itd. \n"
"od va�eg Internet Provajdera ili sistemskog administratora.\n"
"\n"
"Mo�ete konsultovati i deo upustva o Internet konekcijama ``Starter Guide'' "
"za detalje\n"
"o konfiguraciji, ili jednostavno sa�ekajte da vam se sistem instalira i\n"
"onda pokrenite program koji je tamo opisan za pode�avanje va�e konekcije."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wizard Configuration"
msgstr "�arobnjak Konfiguracija"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "Automatska proba"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"ukoliko je pode�ene na da, proverite prazne lozinke, bez lozinke u /etc/"
"shadow i  korisnike sa 0 id razli�ih od root."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files..."
msgstr "Backup sistemskih fajlova..."

#: ../../any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Nije mogu� prenos bez NIS domena"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Uklanjam �tampa� \"%s\" ..."

#: ../../security/l10n.pm:1
#, c-format
msgid "Shell history size"
msgstr ""

#: ../../standalone/drakfloppy:1
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"Uka�ite na mesto gde se auto_install.cfg fajl nalazi.\n"
"\n"
"Ostavite ga nepopunjenim ukoliko ne �elite da automatski instalacioni mod.\n"
"\n"

#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "Podesi servise"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "Nivo informacija koji mo�e biti dobavljen kroz cpuid instrukcije"

#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr "Peru"

#: ../../standalone/drakbackup:1
#, c-format
msgid " on device: %s"
msgstr " na ure�aj: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "Ukloni Windows(TM)"

#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Pokre�e X Font server (potrebno za pokretanje XFree)."

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Ve�ina ovih vrednosti je izvu�ena iz\n"
"va�eg dosada�njeg sistema.\n"
"MO�ete ih izmeniti po potrebi."

#: ../../standalone/drakfont:1
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Izaberite font ili direktorijum i kliknite na  'Dodaj'"

#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: ../../standalone/drakbug:1
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Cron not available yet as non-root"
msgstr "Cron nije dostupan jo� uvek za non-root"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "Sistem"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Do you want to use this feature?"
msgstr "Da li �elite da koristite ovu opciju ?"

#: ../../keyboard.pm:1
#, c-format
msgid "Arabic"
msgstr "Arapski"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Opcije:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Password required"
msgstr "Potrebna je Lozinka"

#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d minuta"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "Grafi�ka kartica: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV transfer failed!"
msgstr "WebDAV transfer nije uspeo!"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "XFree konfiguracija"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "Izaberite akciju"

#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "Fransuska Polinezija"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
"DrakX generalno detektuje broj tastera koji va� mi� posdeduje. Ukoliko se to "
"ne desi\n"
"on �e pretpostaviti da mi� sa dva tastera i podesi�e emulaciju tre�eg "
"tastera.\n"
"DrakX �e automatski prepoznati da li se radi o PS/2, serijskom ili USB "
"mi�u.\n"
"\n"
"Ukoliko �elite da specificirate drugi tip mi�a odaberite odgovaraju�i\n"
"tip sa liste.\n"
"\n"
"Ukoliko izberete mi�a koji se razlikuje od default-a pojavi�e vam se\n"
"test ekran. Koristite tastere i to�ki�e da bi proverili da li su postavke\n"
"dobre. Ukoliko mi� ne radi ispravno pritisnite taster za razmak (space bar) "
"ili\n"
"taster [Return] da bi poni�tili test i vratili se da bi poku�ali ponovo.\n"
"\n"
"To�ki�i na mi�u se ponekad ne detektuju automatski, pa �ete sami morati da\n"
"izaberete mi�a sa liste. Pazite da izaberete odgovaraju�i vezano\n"
"za port na koji je mi� povezan. nakon izbora mi�a\n"
"i pritiska na taster \"Slede�i ->\", slika mi�a �e biti prikazana na "
"ekranu.\n"
"Pokrenite to�ki� da bi proverili da li je pravilno aktiviran. Kada \n"
"vidite da se to�ki� na ekranu pomera kao i to�ki� na mi�u, testirajte\n"
"tastere i proverite da li kursor na ekrani prati va�e \n"
"pomeranje mi�a."

#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Podr�ka za OKI 4w i kompatibilne mu  win �tampa�e."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instaliram drajver za %s karticu %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Prebacili ste svoj biv�i default �tampa� (\"%s\"), Da li treba da bude "
"ponovo default �tampa� pod novim sistemom za �tampanje %s?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
msgstr "Aktiviraj Server"

#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "Ukrajinski"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Mre�ni pristup nije pokrenut i ne mo�e da se startuje. Proverite va�u "
"konfiguraciju i va�e hardverske komponente. Onda probajte ponova da podesite "
"udaljeni �tampa�."

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Ubacite Boot disketu u ure�aj %s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local network(s)"
msgstr "Lokalna(e) mre�a(e)"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "Ukloni Windows(TM)"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
"applications menu."
msgstr ""
"Va� %s je pode�en.\n"
"Sada mo�ete skenirati va�e dokunete pomo�u \"XSane\"programa iz Multimedija/"
"Grafika podmenija iz menija Aplikacije."

#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr "Firewire kontroleri"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"nakon �to podesite op�te parametre startera , lista startnih opcija\n"
"�e biti dostupna za vreme pokretanja sistema.\n"
"\n"
"Ukoliko postoji jo� operativnih sistema na va�em ra�unaru oni �e automatski\n"
"biti dodani u startni meni. Mo�ete ih i detaljno podesiti\n"
"ako kliknete na  \"Dodaj\" da bi kreirali novi uos, izaberete postoje�i \n"
"klikom na \"Izmeni\" ili \"Ukloni\" ako �elite da ih izmenite ili uklonite. "
"\"U redu\" prihvata\n"
"va�e izmene.\n"
"\n"
"Ako budete �eleli da dozvolite nekom drugom da ima pristup ostalim "
"operativnim sistemima\n"
"ako restartuje sistem. Mo�ete da izbri�ete\n"
"odgovaraju�e unose za operativne sisteme iz startnog menija, ali �e vam onda "
"biti \n"
"potrebna startna disketa da bi mogli da pristupite ovim\n"
"operativnim sistemima!"

#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
msgstr "Sistemski mod"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Da biste mogli da �tampate na NetWare �tampa�, treba da navedete ime  "
"NetWare servera za �tampa� (koje nije uvek isto kao TCP/IPhostname! );te  "
"ime 'reda' �tampa�a kome pristupate,kao i potrebna korisni�ka imena i "
"lozinke."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Netmask:"
msgstr "Mre�na maska:"

#: ../../network/adsl.pm:1
#, c-format
msgid "Do it later"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "Dodatak"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
"Osve�i listu �tampa�a (da bi prikazao sve dostupne udaljene CUPS �tampa�e)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Kada se ova opcija uklju�i, svako pokretanje CUPS automatski osiguravamo da\n"
"\n"
"- ukoliko je LPD/LPRng instaliran, /etc/printcap ne�e biti preisan od strane "
"CUPS-a\n"
"\n"
"- ukoliko /etc/cups/cupsd.conf nedostaje, bi�e kreiran\n"
"\n"
"- kada se objavi informacija o �tampa�u, ona ne sadr�i \"localhost\" kao ime "
"servera.\n"
"\n"
"Ukoliko vam neke od ovih mera predstavljaju problem, isklju�ite ovu opciju, "
"ali �ete sami morati da podesite ove opcije."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Auto instalacija mo�e biti potpuno automatizovana ukoliko �elite,\n"
"u tom slu�aju preuze�e kontrolu nad hard-diskom!!\n"
"(ovo se odnosi na instalaciju na drugoj ma�ini).\n"
"\n"
"Mo�da volite da ponovite instalaciju.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Mre�ni �tamap� \"%s\", port %s"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "Izaberite koji �e mre�ni adapter biti kori�ten za LANmre�u."

#: ../../standalone/drakbackup:1
#, c-format
msgid "OK to restore the other files."
msgstr "U Redu za obnavanje drugih fajlova."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Izaberite  raspored tastature."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr "Ure�aj za �tampa� URI"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not erasable media!"
msgstr "Medij nije izbrisiv!"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "Bazirano na terminalu"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogu�i/Onemogu�i IP spoofing za�titu."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Instaliram sistem za �tampanje u %s sigurnosnom nivou"

#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "Korisni�ko ime ve� je preduga�ko"

#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "WebDAV udaljeni sajt je ve� u sync!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "U�itavam CUPS bazu podataka..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "Kreiraj auto instalacionu disketu"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t korisni�ko ime: %s\n"
"\t\t na putanji: %s \n"

#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr "Somalija"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No open source driver"
msgstr "Nema open source drajvera"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Def."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Ovo je sli�no prethodnom nivou, ali je sada sistem potpuno zatvoren i "
"sigurnosne opcije su maksimalne."

#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr "Nikaragva"

#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr "Nova Kaledonija"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Evropski protokol (EDSS1)"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Delete"
msgstr "/_Bri�i"

#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "Video mod"

#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr "Oman"

#: ../../standalone/logdrake:1
#, c-format
msgid "Please enter your email address below "
msgstr "Unesite svoju email adresu dole"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Network Monitoring"
msgstr "Pra�enje stanja mre�e"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "Nova veli�ina u MB:"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tip tabele particija: %s\n"

#: ../../any.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentifikacija Windows Domena"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "US tastatura"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "Emulacija tastera"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", mre�ni �tampa� \"%s\", port %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko trake:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Problemi sa FTP konekcijom: Nije mogu�e poslati va�e backup fajlove preko "
"FTP.\n"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Sending Speed:"
msgstr "Brzina pri slanju:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Klasi�ni tester zvuka treba da pokrene slede�e komande:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" �e vam re�i koji drajver va�a zvu�na "
"kartica koristi \n"
"po default-u\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" �e vam re�i koji je drajver "
"trenutno\n"
"u upotrebi\n"
"\n"
"- \"/sbin/lsmod\" �e vam omogu�iti da proverite da li njegov je drajverov "
"modul\n"
"u�itan ili nije\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" �e\n"
"vam re�i da li su server za zvuk i alsa pode�eni za pokretanje u\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" �e vam re�i kakav je nivo ja�ine zvuka\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" �e vam re�i koji program koristi dzvu�nu "
"karticu.\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Halt bug"
msgstr "Halt bug"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert configuration"
msgstr "KOnfiguracija alarma za Mail"

#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Matching"
msgstr "poklapanje"

#: ../../keyboard.pm:1
#, c-format
msgid "Bosnian"
msgstr "Bosanski"

#: ../../standalone/drakbug:1
#, c-format
msgid "Release: "
msgstr "Verzija: "

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "Brzina konekcije "

#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr "Namibija"

#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "Server Baze podataka"

#: ../../standalone/harddrake2:1
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "specijalni kapaciteti ure�aja (burning opcija i ili podr�ka za DVD)"

#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Nije mogu�e dodati particiju na _formatiran_ RAID md%d"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
"blokiranja ra�unara.\n"
"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security options..."
msgstr "Samo momenat, pode�avam sigurnosne opcije..."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Nepoznati|CPH05X (bt878) [mnogi proizvo�a�i]"

#: ../../standalone/drakboot:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Pokreni X-Window sistem pri stratanju"

#: ../../standalone/drakbackup:1
#, c-format
msgid "hourly"
msgstr "na sat"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Right Shift key"
msgstr "Desni Alt taster"

#: ../../standalone/drakbackup:1
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Uspe�no Obnovljeni na %s       "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Omogu�avam port �tampa�a dostupnim za CUPS..."

#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigva i Barbuda"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Ukazuje da je lozinka u sistemskoj bazi podataka razli�ita\n"
"od one u bazi terminalnog Servera.\n"
"Obri�ite/ponovo dodajte korisnika na Terminalnom Serveru da bi omou�ili "
"prijavljivanje."

#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "�panski"

#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "Start"

#: ../../security/l10n.pm:1
#, c-format
msgid "Direct root login"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "Pode�avam aplikacije..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodo�li u �arobnjak za pode�avanje �tampa�a\n"
"\n"
"Ovaj �arobnjak �e vam pomo�i da instalirate svoj(e) �ampa�(e) povezane na "
"ovaj ra�unar, poezan direktno na mre�u ili udaljenoj Windows ma�ini.\n"
"\n"
"Ukoliko imate �tampa�(e) povezane na ovu ma�inu, priklju�ite ih na ra�unar "
"kao i u elektri�no napajanje da bi mogli biti auto-detektovani. Tako�e i "
"mre�ni �tampa�(i)i Windows ma�ine moraju biti povezane i uklju�ene.\n"
"\n"
"Nemojte da zaboravite da auto-detekcija �tampa�a na mre�i traje du�e nego za "
"�tampa�e koji se nalaze poveani direktno na va� ra�unar. Zato isklju�ite "
"auto-detekciju mre�nih i/ili Windows-hosted �tampa�a ako vam to nije "
"potrebno.\n"
"\n"
"Kliknite na \"Slede�i\" kada ste spremni, i na \"Poni�ti\" ako ne �elite da "
"sada pode�avate va� �tampa�(e)."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "Normalna modemska konekcija"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
msgstr "Odabir fajlova"

#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Erase tape before backup"
msgstr "Koristi traku za backup"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Run config tool"
msgstr "Pokreni konfiguracioni alat"

#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "Instalacija startera"

#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "Veli�ina Root particije u MB:"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Ovo je obavezni paket,i ne mo�e biti deselektovan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Etherboot ISO image je %s"

#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host "
"ime IP adresi."

#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr "Sveta Lucija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "November"
msgstr "Novembar"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Disconnect..."
msgstr "Diskonektovan..."

#: ../../standalone/drakbug:1
#, c-format
msgid "Report"
msgstr "Prijava"

#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr "Palau"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "nivo"

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""
"Sva pitanja �e biti pra�ena od strane jednog kvalifikovanog MandrakeSoft "
"tehni�kog eksperta."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Odabir grupa paketa"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Automatska rekonfiguracija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Oblnovi preko Mre�nog protokola: %s"

#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Ovde mo�ete podesiti svaki parametar modula."

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Izaberite rezoluciju i broj boja pri prikazu"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Emulate third button?"
msgstr "Da imitiram rad 3 tastera?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Vi ne mo�ete da kreirate novu particiju\n"
"(po�to ste dosegli maksimalan broj primarnih particija).\n"
"Prvo uklonite primarnu particiju a zatim kreirajte extended particiju."

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "Montiraj"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Creating auto install floppy"
msgstr "Kreiram auto instalacionu disketu"

#: ../../steps.pm:1
#, c-format
msgid "Install updates"
msgstr "Instaliraj update-ove"

#: ../../standalone/draksplash:1
#, c-format
msgid "text box height"
msgstr "visina tekst boksa"

#: ../../standalone/drakconnect:1
#, c-format
msgid "State"
msgstr "Stanje"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Proverite da li je medij prisutan u ure�aju %s"

#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "Omogu�i multi-profile"

#: ../../fs.pm:1
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Ove opcije mogu sa�uvati i kasnije obnoviti sve fajlove u va�em /etc "
"direktorijumu.\n"

#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "Lokalni  �tampa�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Files Restored..."
msgstr "Fajlovi obnovljeni..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "Odabir paketa"

#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr "Mauritanija"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Mogu da zadr�im va�u trenutnu konfiguraciju i pretpostaviti da je ve� "
"pode�en DHCP server; u tom slu�aju proverite da li je dobro o�itana Mre�a "
"koju koristite za va�u lokalnu mre�u; Ja je ne�u rekonfigurisati i ne�u "
"dirati u va�u DHCP server konfiguraciju.\n"
"\n"
"default DNS unos je Caching Nameserver pode�en na firewall-u. Mo�ete je "
"zameniti sa va�im ISP DNS IP, na primer.\n"
"\t\t      \n"
"Ina�e, ja mogu da rekonfiguri�em va� interfejs i (re)konfiguri�em DHCP "
"server za vas.\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Nije prona�en lokalni �tampa�! Da bi ru�no instalirali �tampa� unesite ime "
"ure�aja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/"
"lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB �tampa�: /dev/usb/lp0, "
"drugi USB �tampa�: /dev/usb/lp1, ...)."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "Sve primarne particije su zauzete"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", �tampa� \"%s\""

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Kada se to uradi, trebali bi da restartujete X\n"
"okru�enje da bi izbegli probleme sa promenom hostname-a."

#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation Server Configuration"
msgstr "Pode�avanje Instalacionog servera"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "Konfiguracija  IDE"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "Mre�na funkcionalnost nije pode�ena"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Configure module"
msgstr "Modul za pode�avanje"

#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Kokos (Kelingova) Ostrva"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Morate restartovati ra�unar da bi se izmene izvr�ile"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "Broj telefona provajdera"

#: ../../printer/main.pm:1
#, c-format
msgid "Host %s"
msgstr "Host %s"

#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "Fid�i"

#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "Jermenija"

#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "Drugi flopi/disketni ure�aj"

#: ../../standalone/harddrake2:1
#, c-format
msgid "About Harddrake"
msgstr "O Harddrake-u"

#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Drive capacity"
msgstr "Kapacitet ure�aja"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Ubacite disketu u ure�aj\n"
"Svi podaci na disketi �e biti izbrisani !"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "Veli�ina: %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control i  Shift tasteri istovremeno"

#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
msgstr "sekundarno"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Backup Configuration."
msgstr "Pogledaj Backup Konfiguraciju."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "ukoliko je pode�eno na da, po�aljite izve�taj o proveri u syslog."

#. -PO: keep this short or else the buttons will not fit in the window
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "Bez lozinke"

#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr "Nigerija"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "Nema ni jedne pariticije za rad"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Slede�i skeneri\n"
"\n"
"%s\n"
"su direktno povezani na va� sistem.\n"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr ", multi-funkcionalni ure�aj na paralelnom portu #%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Da bi �tampali na TCP ili socket �tampa�, morate da obezbedite ime hosta ili "
"IP �tampa�a te (opcija) broj porta (default je 9100). Na HP JetDirect "
"serverima broj porta je obi�no 9100, a na drugim serverima mo�e biti "
"druga�iji. Pogledajte upustvo koje ste dobili uz hardver."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "Informacije o hard disku"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "Ruski"

#: ../../lang.pm:1
#, c-format
msgid "Jordan"
msgstr "Jordan"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "Sakrij fajlove"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Auto-detekcija �tampa�a povezanih sa ovom ma�inom"

#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "Ti malera, nema diskete"

#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "Bolivija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Podesite va� Windows server da omogu�i pristup �tamap�u pod IPP protokolom i "
"podesite �tampanje sa ove ma�ine sa \"%s\" tipom konekcije u Printerdrake-"
"u.\n"
"\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "Lo� paket"

#: ../../share/advertising/07-server.pl:1
#, c-format
msgid ""
"Transform your computer into a powerful Linux server: Web server, mail, "
"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
"Pretvorite svoju ma�inu u mo�ni Linux server sa samo nekoliko poteza mi�em:  "
"Veb server, email, firewall, ruter, fajl server, server za �ampanje, ..."

#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "DrakSec Osnovne Opcije"

#: ../../standalone/draksound:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Napomena: ukoliko iamte ISA PnP zvu�nu karticu, mora�ete da koristite "
"sndconfig program.  Samo ukucajte \"sndconfig\" u konzoli."

#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr "Rumunija"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Group"
msgstr "grupa"

#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "Kanada"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "choose device"
msgstr "izaberite ure�aj"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "Ukloni sa LVM-a"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "Vremenska zona"

#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "Nema�ki"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Next ->"
msgstr "Slede�i  ->"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Najverovatnije je, da je ova particija\n"
"Driver particija, pa ne bi trebali\n"
"da je dirate.\n"

#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "Gvineja-Bisao"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horizontalna frekvencija"

#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Edit"
msgstr "Izlaz"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Demontiranje nije mogu�e,jer se particija korisiti za loop back.\n"
"Prvo uklonite loopback"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""
"Mre�na konfiguracija koja je kreirana tokom instalcije ne mo�e sada da se "
"pokrene. Proverite da li je mre�a dostupna nakon restarta sistema i "
"ispravite konfiguraciju koriste�i Mandrake CKontrolni Centar, sekcija "
"\"Mre�a & Internet\"/\"Konenkcija\", i nakon toga podesite �tampa�, tako�e "
"kori�tenjem Mandrake Kontrolnog Centra, sekcija \"Hardver\"/\"�tampa�\""

#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr "USB kontroleri"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "Kakav sistem va� TV koristi?"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Type:"
msgstr "Tip:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "Deljeno (zajedni�ko)  ime :"

#: ../../standalone/drakgw:1
#, c-format
msgid "enable"
msgstr "omogu�i"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
"KOntaktirajte Mandrake Linux web sajt da bi dobili listu dostupnih mirror-a"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Pojavio se problem tokom restartovanja mre�e?\n"
"%s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "Ukloni loopback fajl ?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Selektovana veli�ina je ve�a od slobodnog prostora"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr "Nedostaje ime NCP servera!"

#: ../../any.pm:1
#, c-format
msgid "Please choose your country."
msgstr "Izaberite svoju zemlju."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
msgstr "backup-ovanje fajlova sa hard diska..."

#: ../../keyboard.pm:1
#, c-format
msgid "Laotian"
msgstr "Laoski"

#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokol dozvoljava korisnicima na mre�i da omogu�e\n"
"merenje performansi za bilo koju ma�inu na toj  mre�i."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "Osve�avanje liste pode�enih skenera ..."

#: ../../modules/interactive.pm:1
#, fuzzy, c-format
msgid "Module configuration"
msgstr "Ru�na konfiguracija"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Scanner"
msgstr "Skener"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Upozorenje: testiranje ove grafi�ke kartice mo�e blokirati va� ra�unar"

#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Korisni�ko ime mo�e sadr�ati samo mala slova, brojeve, `-' i `_'"

#: ../../standalone/drakbug:1
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "Dobro�li kod Krakera"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "Opcije modula:"

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "Secure your networks with the Multi Network Firewall"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr "Nastavi dalje bez pode�avanja mre�e"

#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "Prekini"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Bez tra�enja lozinke na %s za port %s"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Usage of remote scanners"
msgstr "Kori��enje udaljenih skenera"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"Va�a Windows particija je previ�e fragmentirana, prvo pokrenite ``defrag''"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norve�ki)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Napredak Backup-ovanja hard diska..."

#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Unable to fork: %s"
msgstr "Ne mogu da forkujem: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "Unesi: "

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Edit Client"
msgstr "Uredi Klijenta"

#: ../../standalone/drakfont:1
#, c-format
msgid "no fonts found"
msgstr "fontovi nisu prona�eni"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "Mi�"

#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "nema dovoljno mesta u /boot"

#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr "Lihten�tajn"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "Ime hosta:"

#: ../../standalone/draksplash:1
#, c-format
msgid "the color of the progress bar"
msgstr "boja trake sa prikazom napretka"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Fonts Files"
msgstr "Za�mi Font fajlove"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "Dodaj na RAID"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"Mo�ete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
"alternativne kernele, ili za emergency boot image.\n"
"\n"
"Za druge OS-ove - unos sadr�i samo oznaku i \"root\" particiju.\n"
"\n"
"Za Linux, postoji nekoliko mogu�nosti: \n"
"\n"
" * Oznaka: Ovo je jednostavno ime koje �ete ukucati pri yaboot promptu da "
"bi \n"
"izabrali ovu \n"
"startnu opciju.\n"
"\n"
" * Image: Ovo je ime kernela koji se startuje.  Obi�no vmlinux ili \n"
"varijacija vmlinux sa ekstenzijom.\n"
"\n"
" * Root: \"root\" ure�aj ili \"/\" za va�u Linux instalaciju.\n"
"\n"
"  \n"
" * Dodatak: Na Apple hardveru, kernelova opcija se koristi za prili�no "
"�esto \n"
"da\n"
"asistira inicijalizaciju video hardvera, ili da omogu�i emulaciju tastera "
"za \n"
"mi� na tastaturi zbog \n"
"�estog nedostatka drugog i tre�eg tastera na Apple mi�evima.  Sledi par \n"
"primera:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: Ova opcija se mo�e koristiti ili za podizanje inicijalnih "
"modula,\n"
"pre nego je boot \n"
"ure�aj dostupan, ili za podizanje ramdisk image za startanje u hitnim "
"situacijama.\n"
"\n"
" * Initrd-veli�ina: veli�ina default ramdisk je generalno 4096 bajta.  \n"
"Ukoliko vam treba\n"
"alociranje velikog ramdisk-a, ova opcija mo�e biti korisna.\n"
"\n"
"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-\n"
"only, da bi omogu�ila\n"
"proveru datote�nog sistema pre nego sistem postane \"aktivan\".  Ovde "
"mo�ete \n"
"poni�titi ovu opciju.\n"
"\n"
" * NoVideo: Ukoliko se Apple video hardver poka�e veoma problemati�nim, \n"
"mo�ete\n"
"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom \n"
"framebuffer podr�kom.\n"
"\n"
" * Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
"pritisnete ENTER pri yaboot promptu.  Ovaj unos �e tako�e biti dodatno \n"
"ozna�en sa \"*\", ukolik pritisnete [Tab] da bi videli startnu selekciju."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "�tampa� \"%s\" je uspe�no dodan u Star Office/OpenOffice.org/GIMP"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr "Disketa nije prona�ena!"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Da bi znali koje su vam opcije dostupne za teku�i �tampa� pro�itajte listu "
"koja je dole prikazana ili kliknite na taster \"Listu opcija za �tampanje\".%"
"s%s\n"
"\n"

#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "Saudijska Arabija"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "Svejedno nastaviti ?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Ukoliko se va� �tampa� ne nalazi na listi, izaberite kompatibilni "
"(pogledajte upustvo za �tampa�) ili  sli�an njemu."

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "�tampa�"

#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "Internet"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices were added:\n"
msgstr "Neki ure�aji su dodani:\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "�tampam na �tampa�u \"%s\""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow i /etc/hosts.deny je ve� pode�en - nije izmenjen"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Tape"
msgstr "Obnovi sa trake"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid ""
"To submit a bug report, click the report button, which will open your "
"default browser\n"
"to Anthill where you will be able to upload the above information as a bug "
"report."
msgstr ""
"Da bi prijavili bag, kliknite na taster prijava.\n"
"Ovo �e otvoriti prozor web pretra�iva�a sa adresom %s\n"
" gde �e te prona�i formular koji treba da popunite.Informacija koja je gore "
"prokazana �e biti \n"
"preba�ena na taj server."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "Izaberite profil za konfigurisanje"

#: ../../security/l10n.pm:1
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""
"\n"
"\n"
"Unesite Zeroconf host name bez ta�aka osim ako ne �elite\n"
"koristite default host name."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now from configuration file"
msgstr "Backup-uj sada iz konfiguracionog fajla"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Ta�ke montiranja treba da sadr�e samo alfanumeri�ke karaktere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "Restartujem sistem za �tampanje ..."

#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "Pogledaj informacije o hardveru"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Day"
msgstr "Dan"

#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "Prvi sektor startne particije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr "Proizo�a� i model �tampa�a"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - �tampaj, nemoj da pamti�"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[OPTIONS]...\n"
"Program za pode�avanje Mandrake Terminalnog Servera\n"
"--enable         : uklju�uje MTS\n"
"--disable        : isklju�uje MTS\n"
"--start          : pokre�e MTS\n"
"--stop           : zaustavlja MTS\n"
"--adduser        : dodaje postoje�eg sistemskog korisnika u MTS (zahteva "
"korisni�ko ime)\n"
"--deluser        : bri�e postoje�eg sistemskog korisnika iz MTS (zahteva "
"korisni�ko ime)\n"
"--addclient      : dodaje klijentsku ma�inu na MTS (zahteva MAC adresu, IP, "
"nbi image ime)\n"
"--delclient      : bri�e klijentsku ma�inu iz MTS (zahteva MAC adresu, IP, "
"nbi image ime)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet Mask:"
msgstr "Subnet maska:"

#: ../../security/l10n.pm:1
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Morate da navedete horizontalni sinhronizacioni opseg va�eg monitora.\n"
"Mo�ete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
"industrijskim standardima monitora, ili da navedete odre�eni opseg.\n"
"\n"
"VEOMA JE VA�NO da ne navedete tip monitora koji ima ovaj opseg ve�i nego\n"
"�to ga ima va� monitor. Ako niste sigurni, odaberite manje vrednosti."

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "Promeni"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Komande \"%s\" i \"%s\" tako�e omogu�avaju izmenu opcija za konkretni posao "
"�tampanja. Jednostavno dodajte �eljene opcije u komandnu liniju, e. g. \"%s "
"<fajl>\".\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr "Potrebno je ime hosta, korisni�ko ime i lozinka!"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "Ubacite disketu u ure�aj %s"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV je protokol koji vam omogu�ava da montirate direktorijum veb servera\n"
"lokalno, i da ga tretirate kao lokalni fajl sistem (dostupni veb server je\n"
"pode�en kao WebDAV server). Ukoliko �elite da dodate novu WebDAV ta�ku\n"
"montiranja, izaberite \"Novi\"."

#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "novi"

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Would you like to try again?"
msgstr "Da li �elite da probate ponovo?"

#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "�arobnjak (pomo�nik)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected server"
msgstr "Uredi selektovani server"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose where you want to backup"
msgstr "Izaberite �ta �elite da backup-ujete"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Treba da resetujete ma�inu za primenu izmena u tabeli particija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include the browser cache"
msgstr "Ne uklju�uj ke� pretra�iva�a"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Neuspe�na prvera fajl sistema %s. Da li �elite da popravite gre�ke? (budite "
"pa�ljivi, mo�ete izgubiti podatke)"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Koji  raspored tastature �elite ?"

#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "Standardni"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Please choose your mouse type."
msgstr "Izaberite tip mi�a"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Connect..."
msgstr "Konektovanje..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Neuspelo pode�avanje �tampa�a \"%s\"!"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "not configured"
msgstr "nije pode�eno"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../standalone/drakfont:1
#, c-format
msgid "About"
msgstr "O"

#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "Pode�avanje proksija"

#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "Po�etak: sektor %s\n"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "No Mask"
msgstr "Lo� paket"

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface already configured"
msgstr "Mre�ni interfejs je ve� pode��en"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr "Ne mogu da pristupim disketi!"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "Server za el.po�tu"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "Kliknite na particiju"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ", multi-fuunkcionalni ure�aj na HP JetDirect"

#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "Linux"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Have a nice day!"
msgstr "�elimo vam prijatan dan!"

#: ../../help.pm:1
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Upgrade %s"
msgstr "A�uriranje %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "Izbor povezanosti �tampa�a"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "Skeniranje TV kanala u toku ..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"Gre�ka tokom slanja fajla preko FTP-a.\n"
" Ispravite va�u FTP konfiguraciju."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range Start:"
msgstr "Po�etak IP raspona:"

#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Interent super server demon (znan kao netd) starta \n"
"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
"elnet, ftp, rsh, i  rlogin.Isklju�uju�i njega, isklju�ujete i servise \n"
"za koje je on odgovoran."

#: ../../standalone/draksplash:1
#, c-format
msgid "the height of the progress bar"
msgstr "visina trake sa prikazom napretka"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Snimi preko %s na host: %s\n"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "Domain Name Server"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Level:"
msgstr "Nivo sigurnosti:"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Ta�ke montiranja moraju da po�inju sa vode�im /"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "Izaberite veli�inu va�eg CD/DVD medija (Mb)"

#: ../../standalone/logdrake:1
#, c-format
msgid "Postfix Mail Server"
msgstr "Postfix mail server"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "Kraj bez snimanja promena"

#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr "Jemen"

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "This product is available on the MandrakeStore Web site."
msgstr "Ovaj proidzvod je dostupan na MandrakeStore veb sajtu"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Postoji mnogo stvari za izbor iz (%s).\n"

#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "Detekcija hard diska"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Niste selektovali nijednu grupu paketa.\n"
"Izaberite minimalnu instalaciju koju �elite:"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Unesite URL WebDAV servera"

#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tad�ikistan"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "Prihvati"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "Description"
msgstr "Opis"

#: ../../standalone/drakbug:1
#, c-format
msgid "Please enter summary text."
msgstr ""

#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Gre�ka pri otvaranju %s za ispis: %s"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tip mi�a: %s\n"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Va�a kartica mo�e imati 3D hardversku akceleraciju sa XFree %s."

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "Izaberite monitor"

#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "Prazna oznaka nije dozvoljena"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr "Malte�ki (UK)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "Ne mogu dodati vi�e ni jednu particiju"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "Veli�ina u MB:"

#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "Udaljeni �tampa�"

#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "Izaberite koji jezik �elite da korisitite."

#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"Upozorenje: Ovaj ure�aj je ve� prethodno konfigurisan za konektovanje na "
"Internet.\n"
"Samo prihvaitite da bi postavku ostavili istom.\n"
"Izmena polja koje vidite �e poni�titi postoje�u konfiguraciju."

#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Ja mogu podesti va� ra�unar da automatski uloguje jednog korisnika."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Floppy format"
msgstr "Format diskete"

#: ../../standalone/drakfont:1
#, c-format
msgid "Generic Printers"
msgstr "Generic �tampa�i"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Izaberite �tampa� na koji �elite da �aljete dokumente za �tampanje ili "
"unesite  ime/ime fajla ure�aja u liniju za unos"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Skeneri  na ovoj ma�ini su dostupni za ostale ra�unare"

#: ../../any.pm:1
#, c-format
msgid "First sector of the root partition"
msgstr "Prvi sektor root particije"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Alternative drivers"
msgstr "Alternativni drajveri"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Proverite sve opcije koje vam trebaju.\n"

#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "Kape Verde"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "Da li ovaj procesor ima Cyrix 6x86 Coma bag"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Loading printer configuration... Please wait"
msgstr "Izmena konfiguracije �tampa�a"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
"Prvi pentium procesori su bili bagoviti i blokirali su rad pri ddekodiranju "
"F00F bytecode"

#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "Guam"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Izaberite port na koji je va� �tampa� povezan ili unesite ime/ime fajla "
"ure�aja u liniju za unos"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Options/Test"
msgstr "/Opcije/Test"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Na ovom nivou treba obratiti pa�nju. On pravi va� sistem lak�im\n"
"za upotrebu, ali i  veoma osetljivim: ne sme biti kori�ten na ma�ini\n"
"koja je povezana sa drugim ma�inama ili na internet. Ovde ne postoji\n"
"pristup sa lozinkom."

#: ../../fs.pm:1
#, c-format
msgid "Mounting partition %s"
msgstr "Montiram particiju %s"

#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "Korisni�ko ime"

#: ../../standalone/drakbug:1
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Koju particiju �elite da korisite za Linux4Win?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "Testiranje stranica"

#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "Lokalna mera"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Lista podataka za obnavljanje:\n"
"\n"

#: ../../fs.pm:1
#, c-format
msgid "Checking %s"
msgstr "Proveravam %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/Socket Opcije �tampa�a"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr "(DMA) kartice"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnecting from Internet "
msgstr "Diskonektovanje sa Interneta"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "Francuska"

#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
msgstr "pretra�i"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr "Proveravam instalirani softver..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "Nedostaje ime udaljenog �tampa�a!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Da li �elite da omogu�ite �rampanje na �tampa�ima u lokalnoj mre�i?\n"

#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Turska"

#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Number of buttons"
msgstr "Broj tastera"

#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vijetnamski  \"number row\"QWERTY"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Module"
msgstr "Modul"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"Kao dodatak, queues koji su kreirani sa ovim programom ili  \"foomatic-"
"configure\" ne mogu biti preba�eni."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware"
msgstr "Hardver"

#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl i Alt tasteri istovremeno"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "SAD"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "User umask"
msgstr "Korisnici"

#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "Podrazumevani OS ?"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "�vajcarski (Nema�ki raspored)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "Podesi sve glave nezavisno"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Izaberite �tampa� koji �elite da podesite. Pode�avanje �tampa�a �e biti "
"potpuno automatsko. Ukoliko va �tampa� nije pravilno detektovan ili vi�e "
"�elite da ga sami podesite, uklju�ite \"Ru�na konfiguracija\"."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "NTP Server"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Sulogin(8) in single user level"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogu�i/Onemogu�i sulogin(8) u single user nivou."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "U�itaj/Snimi na disketu"

#: ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "Ova tema nema nijedan bootsplash u %s !"

#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "lepo"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Leaving in %d seconds"
msgstr "Izlazim za %d sekundi"

#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Izaberite serijski port  na koji je modem povezan."

#: ../../standalone/drakperm:1
#, c-format
msgid "Property"
msgstr "Svojstvo"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN Configuration"
msgstr "LAN konfiguracija"

#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "Gana"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Path or Module required"
msgstr "Potrebna je putanja ili modul"

#: ../../standalone/drakfont:1
#, c-format
msgid "Advanced Options"
msgstr "Napredne opcije"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "View Configuration"
msgstr "Konfiguracija"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Coma bug"
msgstr "Coma bug"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": unchecking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Na ovoj ta�ki, morate izbrati koju particiju(e) �elite da koristite za\n"
"instalaciju novog Mandrake Linux sistema. Ukoliko su particije\n"
"ve� definisane (od predhodne instalacije ili od strane\n"
"drugog alata za particije), mo�ete da koristite postoje�e particije.\n"
"U drugim slu�ajevima,\n"
"hard disk particije moraju biti definisane.\n"
"\n"
"Da bi kreirali particije, morate prvo izabrati hard disk. Mo�ete izabrati\n"
"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
"\n"
"Za particioniranje selektovanog hard diska, mo�ete koristiti slede�e "
"opcije:\n"
"\n"
"   * \"O�isti sve\": ova opcija bri�e sve particije na izabranom hard \n"
"disku.\n"
"\n"
"   * \"Auto alociranje\": ova opcija dozvoljava da automatski kreirate  Ext2 "
"i \n"
"swap particije na slobodnom prostoru \n"
"     hard diska.\n"
"\n"
"\"Jo�\": daje pristup dodatnim opcijama:\n"
"\n"
"   * \"Spasi tabelu particija\": ukoliko je va�a tabela particija "
"o�te�ena, \n"
"mo�ete da probate da je oporavite koriste�i ovu opciju. Budite\n"
"     pa�ljivi i znajte da mo�e da i ne uspe.\n"
"\n"
"   * \"Vrati na staro\": ova opcija �e poni�titi izmenu.\n"
"\n"
"   * \"Ponovno u�itavanje\": ovu opciju mo�ete koristiti ukoliko �elite da \n"
"poni�titisve promene i u�itate inicijalnu tabelu particija\n"
"\n"
"   * \"�arobnjak\": ukoliko �elite da koristite �arobnjaka za "
"particioniranje \n"
"hard diska, izaberite ovu opciju. Preporu�ena je ukoiko\n"
"     nemate mnogo znanja o partcijama.\n"
"\n"
"   * \"Povrati sa diskete\": ukoliko ste snimili tabelu particija na \n"
"disketu  tokom prethodne instalacije, mo�ete je\n"
"     vratiti sa ovom opcijom.\n"
"\n"
"   * \"Snimi na disketu\": ukoliko �elite da da snimite tabelu particija na\n"
"disketu da bi mogli kasnije da je povratite, mo�ete da iskoristite\n"
"     ovu opciju. Naro�ito preporu�ujemo ovu opciju\n"
"\n"
"   * \"Ura�eno\": kada zavr�ite sa particioniranjem hard diska, iskoristite "
"ovu opciju da bi snimili promene.\n"
"\n"
"Kada defini�ete veli�inu particija, mo�ete kona�no podesiti veli�inu\n"
"particija pomo�u tastera sa strelicama na va�oj strelicama\n"
"Za vi�e informacija, mo�ete za svaku ocpiju  dobiti kretanjem pomo�u "
"tastature: navigacijom kroz particije pomo�u [Tab] tastera i [Up/Down] "
"strelica.\n"
"\n"
"Kada je particija izabrana, mo�ete koristiti:\n"
"\n"
" * Ctrl-c za kreiranje nove particije (kada je izabrana prazna particija);\n"
"\n"
" * Ctrl-d za brisanje particije;\n"
"\n"
" * Ctrl-m za postavljanje ta�ke montiranja.\n"
"\n"
"Da bi dobili informacije o razli�itim dostupnim tipovima sistema, "
"pro�itajte\n"
"ext2FS poglavlje iz ``Upustva''.\n"
"\n"
"Ukoliko radite instalaciju na PPC Ma�inu, mo�da �ete �eleti da kreirate "
"malu\n"
"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo ve�om,\n"
"na primer 50MB, mo�ete iskoristiti taj prostor za sme�tanje\n"
"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"Grafi�ka kartica\n"
"\n"
"   Program za instalaciju obi�no automatski detektuje i pode�ava\n"
"grafi�ku kartu koja je instalirana u va�oj ma�ini. Ukoliko to nije slu�aj, "
"mo�ete\n"
"da je izaberete sami sa liste ponu�enih kartica.\n"
"\n"
"   U slu�aju da je vi�e grafi�kih servera dostupno za va�u karticu, sa ili\n"
"bez 3D akceleracije, onda sami odaberite onu koja najbolje odgovara\n"
"va�im potrebama."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "Gre�ka pri instalaciji paketa:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Konfiguracija Lexmark inkjet �tampa�a"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "Poni�ti radnju"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "Sa�uvaj tabelu particija"

#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "Finski"

#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr "Makedonija"

#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"per-user deljenje resursa koristi grupu \"fileshare\". \n"
"Vi pomo�u userdrake-a mo�ete dodati korisnika u ovu grupu."

#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "Slovena�ki"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Autorizuje sve servise koje kontroli�e tcp_wrappers (see hosts.deny(5)) ako "
"je \\fIarg\\fP = ALL. Samo lokalni\n"
"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. Za autorizaciju vama "
"potrebnih servisa , koristite /etc/hosts.allow\n"
"(see hosts.allow(5))."

#: ../../lang.pm:1
#, c-format
msgid "Libya"
msgstr "Libija"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on parallel port #%s"
msgstr "�tampa� na paralelnom portu #%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Nare�i na CD"

#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "Tabela"

#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ne znam kako da formatiram %s u tipu %s"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "Model"
msgstr "Model"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "USB printer #%s"
msgstr "USB �tampa� #%s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Stop Server"
msgstr "Zaustavi Server"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"Izaberite temu za\n"
"lilo i bootsplash,\n"
"a mo�ete ih odabrati\n"
"odvojeno"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Modem"
msgstr "Modem"

#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "Koristi auto detekciju"

#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM daje podr�ku za mi�a za teksulano-bazirane aplikacije kao �to je\n"
"Midnight Commander.Isto tako daje podr�ku za  pop-up menije na  konzoli."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Started on boot"
msgstr "Pokrenuto pri startanju"

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""
"Priklju�ite se MandrakeSofttimovima za podr�ku i Linux zajednici online da "
"bi podelili svoje znanje i pomogli drugima tako �to �ete postati priznati "
"Ekspert na online veb sajtu za tehni�ku podr�ku:"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "No password aging for"
msgstr "Bez lozinke"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"Slede�e opcije se mogu postaviti da podese va�\n"
"sigurnosni sistem. Ukoliko vam treba obja�njenje, kliknite na pomo�.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Automatski prona�i dostupne �tampa�e na udaljenim ma�inama"

#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "Isto�ni Timor"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On Tape Device"
msgstr "na ure�aju za trake"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Snimi na traku na ure�aju: %s"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Login name"
msgstr "Ime domena"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Report unowned files"
msgstr "ukoliko je pode�eno na da, prijavite fajlove bez vlasnika."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Del profile..."
msgstr "Ukloni profil..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr "Instaliram Foomatic ..."

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Molim va� izlogujte se i restartujte (Ctrl-Alt-BackSpace) ra�unar"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected"
msgstr "detektovano"

#: ../../network/netconnect.pm:1
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Mre�a mora da se restartuje. Da li �elite da je restartujete ?"

#: ../../standalone/drakbug:1
#, c-format
msgid "Package: "
msgstr "Paket: "

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "Ne mogu da upisujem u /etc/sysconfig/bootsplash."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr "SIGURNOSNO UPOZORENJE!"

#: ../../standalone/drakfont:1
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: ../../standalone/drakboot:1
#, c-format
msgid "No, I don't want autologin"
msgstr "Ne, ja ne �elim autologovanje"

#: ../../standalone/drakbug:1
#, c-format
msgid "Windows Migration tool"
msgstr "Alat za prelazak za Windows-a"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "All languages"
msgstr "Svi jezici"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "Uklanjanje: %s"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "%s ne odgovara"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "Testiranje konekcije..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cache size"
msgstr "Veli�ina ke�a"

#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Lozinke su sada omogu�ene, ali se i dalje ne preporu�uje da se koristi\n"
"kao mre�ni ra�unar."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "Po�etni sektor: "

#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongo (Brazavil)"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Read"
msgstr "Samo-�itanje"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket %s mora biti instaliran. Da li �elite da ga instalirate?"

#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr "Sej�eli"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake je upore�ivao ime modela dobijenog autodetekcijomsa modelima "
"prikazanim u njegovoj bazi podataka da bi prona�ao odgovaraju�i. Ovaj izbor "
"mo�e biti pogre�an, posebno kada se va� �tampa� uop�tene nalazi u bazi "
"podataka. Zato proverite da je izbor ispravan i kliknite \"Ovaj model je "
"ispravan\" ukoliko jeste a ukoliko nije, kliknite \"Ru�no izaberite model\" "
"da bi mogli da sami izaberete �tampa� na slede�em ekranu.\n"
"\n"
"Za va� �tampa� Printerdrake je prona�ao:\n"
"\n"
"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
msgstr "Pogre�na lodzinka na %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Postoji jedan nepoznati �tama� koje je direktno povezan an va� sistem"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Right Control key"
msgstr "Desni Alt taster"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "Ubacite FAT formatiranu praznu disketu u ure�aj %s"

#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr "Zambija"

#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Administracija Nivoa Sigurnosti (login ili email)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Sorry, we support only 2.4 kernels."
msgstr "�alim, ali podr�ani su samo 2.4 kerneli."

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "Rumunski (qwerty)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
msgstr "U razvoju ... molim Vas sa�ekajte"

#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egipat"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "�e�ka"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "Zvu�na kartica"

#: ../../standalone/drakfont:1
#, c-format
msgid "Import Fonts"
msgstr "Uvoz fontova"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vi imate jednu veliku MicroSoft Windows particiju.\n"
"Predla�em da prvo izmenite veli�nu (resize) te particije (kliknite na nju,\n"
"a potom na \"Promeni veli�inu\")"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
msgstr "Sa�mi temp fajlove"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"�estitamo, mre�na i internet konfiguracija je zavr�ena.\n"
"\n"
"Konfiguracija se sada mo�e primeniti na sistem.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "Promena tipa particije"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""
"Rezolucija\n"
"\n"
"   Ovde mo�ete izabrati rezoluciju i broj boja koje su\n"
"dostupne za va� hardver. Izaberite ono �to najvi�e odgovara va�im potrebama "
"(ove opcije �ete mo�i\n"
"da promenite i nakon instalacije). Primer izabrane\n"
"konfiguracije je prikazan na monitoru."

#: ../../standalone/draksec:1
#, c-format
msgid "Network Options"
msgstr "Mre�ne opcije"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable msec hourly security check"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i msec proveru sigurnosti na svaki �as."

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Prika�i teme\n"
"u konzoli"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Statistics"
msgstr "Statistika"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(na %s)"

#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "MM serija"

#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "Biblioteka koja �titi od buffer overflow-a i format string napada."

#: ../../standalone/net_monitor:1
#, c-format
msgid "average"
msgstr "prosek"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "Novo ime �tampa�a"

#: ../../fs.pm:1
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "Ekvatorijalna Gvineja"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup System"
msgstr "Backup-uj sistem"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Build Backup"
msgstr "Kreiraj backup"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Da bi �tampali fajl iz komandne linije (prozora terminala) koristite komandu "
"\"%s <fajl>\" ili \"%s <fajl>\".\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "Trenutno, ne postoji dtruga alternativa"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "Rumunski (qwertz)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Write Config"
msgstr "Sa�uvaj Konfiguraciju"

#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
"RIP protokola.Dok se RIP dosta korisiti na malim mre�ama,kompleksniji \n"
" routing protokoli su potrebni za kompleksne mre�e."

#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech mouse (serijski, stari C7 tip)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""
"Drugi (ne drakbackup)\n"
"tasteri su ve� na mestu"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (ili  X Window Sistem) je srce GNU/Linux grafi�kog interfejsa\n"
"na koji se oslanjaju sva grafi�ka okru�enja (KDE, GNOME, AfterStep,\n"
"WindowMaker, itd.) koja se nalaze u Mandrake Linux-u.\n"
"\n"
"Bi�e vam prikazana lista sa razli�itim parametrima �ijom izmenom\n"
"mo�ete dobiti optimalan grafi�ki prikaz: Grafi�ka kartica\n"
"\n"
"\n"
"   Program za instalaciju obi�no automatski detektuje i pode�ava\n"
"grafi�ku kartu koja se nalazi u va�em ra�unu. Ukoliko to nije slu�aj, "
"mo�ete\n"
"sami da izaberete karticu sa liste.\n"
"\n"
"   Ukoliko su razli�iti serveri dostupni za va�u karticu, sa ili\n"
"vez 3D akceleracije, onda treba da izaberete onaj koji najvi�e\n"
"odgovara va�im potrebama.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Program za instalaciju obi�no automatski detektuje i pode�ava\n"
"monitor koji povezan sa va�im ra�unarom. Ukoliko se to ne desi mo�ete "
"izabrati\n"
"sami sa liste ponu�enih monitora\n"
"\n"
"   Ovde mo�ete izabrati rezoluciju i broj boja od\n"
"onih koje su ponu�ene za va� hardver. Izaberite ono �to najvi�e odgovara "
"va�im potrebama\n"
"(ove opcije �ete mo�i izmeniti i nakon instalacije). Izabrana\n"
"konfiguracije se vidi na monitoru.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   sistem �e poku�ati da otvori grafi�ki ekran u �eljenoj\n"
"rezoluciji. Ukoliko mo�ete da vidite poruku tokom testa odgovorite sa \"Da"
"\",\n"
"i DrakX �e nastaviti sa slede�im korakom. Ukoliko ne mo�ete da vidite "
"poruku, to\n"
"zna�i da je neki deo autotedekcije bio nepravilan i\n"
"test �e automatski zavr�iti nakon 12 sekundi, otavaraju�i meni za\n"
"konfiguraciju. Izmenite opcije sve dok ne dobijete korektan grafi�ki "
"prikaz.\n"
"\n"
"\n"
"\n"
"Opcije\n"
"\n"
"   Ovde mo�ete da izaberete da li �elite da va� ra�uanr automatski\n"
"pre�e na grafi�ki interfejs pri startanju. O�igledno, izabra�ete\n"
"\"Ne\" ukoliko je va�a ma�ina server, ili ukoliko niste uspeli da uspe�no \n"
"podesite grafi�ki prikaz."

#: ../../standalone/draksplash:1
#, c-format
msgid "Browse"
msgstr "pretra�i"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Da li ho�ete da se konektujete na internet sada?"

#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "Belgijski"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Da li imate ISA zvu�nu karticu?"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Nije detektovana nijedna mre�na kartica.\n"
"Ne mogu da podesim ovaj tip konekcije."

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Windows"
msgstr "Windows"

#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Ne mogu da napravim snimak pre particioniranja"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Name"
msgstr "Ime hosta"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/Save _As"
msgstr "/Datoteka/Snimi _Kao"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Da bi pristupili �tampa�ima na udaljenim CUPS serverima u va�oj lokalnoj "
"mre�i trebasamo da uklju�ite opciju \"Automatski prona�i dostupne �tampa�e "
"na udaljenim ma�inama\"; CUPS serveri �e izvestiti va�u ma�inu o �tampa�ima "
"automatski. Svi �tampa�i koji su trenutno poznati va�oj ma�ini �e biti "
"prikazani u sekciji \"Udaljeni �tampa�i\" u glavnom prozoru Printerdrake. "
"Ukoliko va� CUPS server(i) nije/nisu u va�oj lokalnoj mre�i, morate uneti IP "
"aadresu(e) i opcionalno broj porta(ova)da bi dobavili informacije sa servera."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
"%s se ne nalazi u bazi podataka za skenere, da li �elite da ga ru�no "
"podesite?"

#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "Pauza pre startanja default image-a"

#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "Ograni�ena komandna linika - opcije"

#: ../../standalone/drakxtv:1
#, c-format
msgid "East Europe"
msgstr "Isto�na Evropa"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "Koristi slobodan prostor"

#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "koristi dhcpd"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert"
msgstr "Mail alarm"

#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "Konfiguracija interneta"

#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr "Detektovan %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _printers"
msgstr "/Autodetekcija _�tampa�a"

#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "Kraj"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "Automatski prika�i izabrane pakete"

#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr "Togo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "CPU zastave prijavljena od strane kernela"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Ne�to je krenulo naopako! - Da li je mkisofs instaliran?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "Probajte ponovo"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "Ovaj model je ta�an"

#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT izmena veli�ine neuspela: %s"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "Pojedina�no biranje paketa"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "Ovoj particici nije mogu�e promeniti veli�inu"

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Location"
msgstr "Lokacija"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable-hrc)"
msgstr "SAD (kabl-hrc)"

#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "Gvatemala"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Aktiviraj/Deaktiviraj proveru promiskuiteta mre�nih kartica."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This machine"
msgstr "Ova ma�ina"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"

#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "Bahrein"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Odaberite fajlove ili direktorijume i klinite na 'Dodaj'"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit scsi modules"
msgstr "omit scsi moduli"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "Familija procesora (npr: 6 za i686 klasu)"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Zbog toga �to radite mre�nu instalaciju, va�a mre�a je ve� pode�ena "
"pode�ena.\n"
"Kliknite na  OK  zadrd�ali konfiguraciju Network/Internet konekcije, ili "
"cancel da bi ponovo uradili kofiguraciju.\n"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Run the daily security checks"
msgstr "ukoliko je pode�eno na da, pokrenite dnevne sigurnosne provere."

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tip tastature: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Ovde mo�ete izabrati da li �elite da �tampa�i na ovoj ma�ini treba da budu "
"dostupni na drugim udaljenim ma�inama i na kojim udaljenim ma�inama."

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr "Malte�ki (US)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Montiranje i demontiranje svih Mre�nih fajl sistema(NFS), SMB (Lan\n"
"Manager/Windows), i  NCP (NetWare) ta�aka montiranja. "

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Launch the wizard"
msgstr "Kliknite ovde za pokretanje �arobnjaka ->"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Tvcard"
msgstr "TV kartica"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "Pre�i na normalni mod"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Size"
msgstr "Veli�ina"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "GRUB"
msgstr "GB"

#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "Grenland"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Thursday"
msgstr "�etvrtak"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "NIje dobra oznaka trake. Traka je ozna�ena sa %s."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno.\n"
"Trenutno je omogu�eno.\n"
"\n"
"�ta �elite da uradite?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete All NBIs"
msgstr "Obri�i sve NBIs"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer grub (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
"Ovaj dijalog vam nudi mogu�nost za fino pode�avanje va�eg startera:\n"
"\n"
" * \"Ponu�eni starteri\": imate tri opcije:\n"
"\n"
"    * \"GRUB\": ukoliko vi�e volite GRUB (tekstualni mod).\n"
"\n"
"    * \"LILO sa grafi�kim menijem\": ukoliko vi�e volite LILO sa grafi�kim\n"
"interfejsom.\n"
"\n"
"    * \"LILO sa tekstualnim menijem\": ukoliko vi�e volite LILO sa \n"
"tekstualnim interfejsom.\n"
"\n"
" * \"Boot ure�aj\": u ve�ini slu�ajeva, ne�ete menjati default\n"
"(\"/dev/hda\"), ali ukoliko �elite, mo�ete starter da instalirate na\n"
"drugi hard disk (\"/dev/hdb\"), ili �ak na disketu (\"/dev/fd0\").\n"
"\n"
" * \"Vreme do po�etka startanja default sistema\": kada startujete ra�unar,\n"
"ova pauza vam omogu�ava da izaberete - u starterovom meniju,\n"
"drugi sistem (recimo Njinjdovs).\n"
"\n"
"!! Budite pa�ljivi, jer ako izaberete da ne instalirate starterr (klikom na\n"
"\"Poni�ti\"), morate osigurati drugi na�in da startujete Mandrake\n"
"Linux sistem! Budite sigurni da znate �t aradite pre nego izmenite\n"
"i jednu opciju. !!\n"
"\n"
"Klikom na opciju \"Napredno\" u ovom dijalogu �e vam biti ponu�ene mnoge "
"napredne\n"
"opcije, koje su rezervisane za napredne korisnike"

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""
"ukoliko je pode�eno, po�aljite izve�taj na ovu email adresu uli je po�aljite "
"root-u."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Koju XFree konfiguraciju �elite da imate ?"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "Jo�"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
"scanbus' would also show you the device number."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Sa ovim sigurnosnim nivoom, kori��enje ovog sistema kao servera postaje "
"mogu�e.\n"
"Sigurnost je sada dovoljno velika za kori��enje ma�ine za server koji "
"prihvata\n"
"konekcije brojnih klijenata. Napomena: ukoliko je va�a ma�ina samo klijent "
"na Internetu, trebali bi da izaberete ni�i nivo."

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Server Name"
msgstr "Ime servera:"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "Lozinka za ra�un"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Vi ste odlu�ili da instalirate starter na particiju.\n"
"Ovo ukazujen ato da ve� imate instaliran starter na hard disku koji "
"butujete.\n"
"\n"
"Na koji drajv se butujete?"

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"UPOZORENJE!\n"
"\n"
"DrakX treba da izmeni veli�inu Windows particije. Budite pa�ljivi: ova\n"
"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da iza�ete\n"
"iz instalacije,pokrenete pod Windows-om\n"
"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
"Ako ste sigurni, pritisnite OK (U redu)."

#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "Tad�ikistanska tastatura"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Mo�ete kopirati konfiguraciju �tampa�a koju ste zavr�ili za spooler %s to %"
"s, va� trenutni spooler. Svi konfiguracioni podaci (ime �tampa�a, opis, "
"lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i "
"poslovi �tampanja.\n"
"Ni svi queues ne mogu biti preba�eni zbog slede�ih razloga:\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Font List"
msgstr "Lista fontova"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Mora�ete da promenite Open Firmware boot-ure�aj da \n"
" bi mogli da koristite starter.  Ukoliko ne vidite prompt\n"
" pri restartu dr�ite Command-Option-O-F pri startanju i unesite:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Onda ukucajte: shut-down\n"
"Kada slede�i put startujete ma�inu trebali bi da vidite staterov prompt."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Po�to izgleda da imate staromodnu ili nepoznatu \n"
" ma�inu, yaboot starter ne�e raditi kod vas.\n"
"Instalacija �e biti nastavljena, ali �ete morati da\n"
"koristite  BootX ili ne�to drugo da bi podigli sistem"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "Izaberite datoteku"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""
"Izaberite mre�u ili hosta na kojem bi lokalni �tampa�i trebali biti dostupni:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ove komande tako�e mo�ete koristiti u polju \"Komande za �tampanje\" "
"dijaloga za �tampanje u ve�em broju aplikacija, ali ovde nemojte da "
"odre�ujete ime fajla jer njega postavlja sama aplikacija iz koje �tampate.\n"

#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "Japan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "Lista sa opcijama za �tampa�"

#: ../../standalone/localedrake:1
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "Izmene su zavr�ene, ali da bi ih primenili morate se izlogovati"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Country / Region"
msgstr "Zemlja"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "Tra�i servere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr "Nedostaje ime za NCP red!"

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Upozorenje, detektovana je jo� jedna Internet konekcija, mo�da koristi va�u "
"mre�u"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom ozna�en kao \"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CDRW media"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"�uva i obnavlja sistemski  entropy pool za ve�i kvalitet generisanje\n"
"slu�ajnih brojeva."

#: ../../share/advertising/07-server.pl:1
#, c-format
msgid "Turn your computer into a reliable server"
msgstr "Pretvorite svoju ma�inu u pouzdan server"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check empty password in /etc/shadow"
msgstr "ukoliko je pode�eno na da, prverite praznu lozinku u /etc/shadow."

#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr "(drajver %s)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback fajl(ovi): \n"
"   %s\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "Ne znam"

#: ../../services.pm:1
#, c-format
msgid "Start when requested"
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle "
"iopasna i mora se pa�ljivo koristiti.\n"
"\n"
"Sa ovom opcijom, mo�i �ete da ponovite instalaciju koju steizveli na ovom "
"ra�unaru, sa povremenim upitima u cilju izmene odre�enih vrednosti "
"parametra.\n"
"\n"
"RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada ne�e biti "
"izvo�eno automatskiy, bez obzira �ta izabrali tokom instalacije na ovom "
"ra�unaru.\n"
"\n"
"Da li �elite da nastavite?"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Telugu"
msgstr "Tokelau"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Va�a kartica trenutno koristi %s\"%s\" drajver (default drajver za va�u "
"karticu je \"%s\")"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
msgstr "Post-deinstalacija"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Connecting to Internet "
msgstr "Povezivanje na Internet"

#: ../../standalone/scannerdrake:1
#, c-format
msgid " ("
msgstr " ("

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid level"
msgstr "Cpuid nivo"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "na Novell serveru \"%s\", �tampa� \"%s\""

#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongolski (�irilica)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Add a module"
msgstr "Dodaj modul"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile to delete:"
msgstr "Profil za brisanje:"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Local measure"
msgstr "Lokalna mera"

#: ../../network/network.pm:1
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr ""

#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "bus mi�"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "Logovanje za ra�un (korisni�ko ime)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Fdiv bug"
msgstr "Fdiv bug"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall konfiguracija\n"
"\n"
"Proerite da li ste podesili va� Mre�ni/Internet pristup sa \n"
"drakconnect pre nego �to nastavite."

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij prenosivi icmp echo."

#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr "Urugvaj"

#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "Benin"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "na Windows serveru \"%s\", deljeni \"%s\""

#: ../../standalone/drakperm:1
#, c-format
msgid "Path selection"
msgstr "Selekcija putanje"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Name/IP address of host:"
msgstr "Ime/IP adresa hosta:"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "Custom disk particioniranje"

#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Ne�to lo�e se de�ava sa va�im hard diskom. \n"
"Test integriteta podataka nije pro�ao. \n"
"To zna�i da sve �to se nalazi na disku �e zavr�iti kao �ubre"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Nedostaje ime hosta ili IP za �tampa�!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Selektujte sve korisnike koje �elite da uklju�ite u backup."

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""
"Ovaj %s mora biti pode�en u printerdrake.\n"
"Mo�ete pokrenuti printerdrake iz Mandrake Kontrolnog Centra iz Hardver "
"sekcije."

#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "Banglade�"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (cable)"
msgstr "Japan (kabl)"

#: ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
msgstr "Testovi inicijala"

#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "Nastavi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom Restore"
msgstr "Obnavljanje po �elji"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Saturday"
msgstr "Subota"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""
"\"Zvu�na kartica\": ukoliko je zvu�na kartica detektovana na va�em sistemu, "
"onda je prikazana\n"
"ovde. Ukoliko primetite da prikazana kartica nije ona koja je stvarno "
"prisutna\n"
"u va�em ra�unaru, mo�ete kliknuti na taster i\n"
"drugi drajver."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set the root umask."
msgstr ""
"Argumenti: (umask)\n"
"\n"
"Podesite root umask."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "Bazirano na skripti"

#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "Gre�ka kod otvaranja datoteka %s"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "PLL opcije :"

#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Morate imati FAT particiju montiranu u /boot/efi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " on "
msgstr " uklj.  "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL mora po�injati sa http:// ili https://"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Mo�ete direktno odrediti URI za pristup �tampa�u. URI mora ispunjavati ili "
"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podr�ani."

#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Drugi OS-ovi (SunOS,BSD,...)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Install/Upgrade"
msgstr "Instalacija/A�uriranje"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d paketa"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "Kostarika"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Program za Backup i vra�anje podataka\n"
"\n"
"--default             : snima default direktorijume.\n"
"--debug               : prikazuje sve debug poruke.\n"
"--show-conf           : lista fajlova ili direktorijuma za backup.\n"
"--config-info         : obja�njava pode�avanje opcija za fajlove (za ne-X "
"korisnike).\n"
"--daemon              : koristi daemon konfiguraciju. \n"
"--help                : prikazuje ovu poruku.\n"
"--version             : prikazuje verziju programa.\n"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "Potrebna Autentifikacija Domena"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""
"\n"
"\n"
" Hvala:\n"
"\t- LTSP Projekat http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"

#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "Koristi libsafe za servere"

#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "Islandski"

#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Upotreba: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Unesite maksimalnu veli�inu\n"
" dozvoljenu za Drakbackup"

#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "Kru�no montiranje  %s\n"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo/grub mode"
msgstr "Lilo/Grub mod"

#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr "Martinik"

#: ../../standalone/drakbackup:1
#, c-format
msgid "HardDrive / NFS"
msgstr "HardDrive / NFS"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Old user list:\n"
msgstr ""
"\n"
"- Korisni�ki fajlovi:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Search Backups"
msgstr ""

#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "broj"

#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "�vedski"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "Koji %s drajver da probam?"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "Oglasi�e se alarm ukoliko jedan od izabranih servisa nije vi�e aktivan"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Weekday"
msgstr "Sreda"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "Vrsta fajl sistema:"

#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr "Severno Marijanska Ostrva"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", multi-fuunkcionalni ure�aj na HP JetDirect"

#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "nijedan"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Ime profila koji se kreira (novi profil je kreiran kao kopija trenutnog) :"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Floppy"
msgstr "Flopi"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
msgstr "Ghostscript referenciranje"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
msgstr "Starter"

#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "Premesti"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "Starter koji �e se koristiti"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "SMB server  host:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Name Servers:"
msgstr "Navedi servere:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Minute"
msgstr "Minut"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Upozorenje !\n"
"\n"
"Pa�ljivo pro�itajte dole navedene uslove. Ukoliko se ne sla�ete sa bilo "
"kojim \n"
"delom, onda nemate odobrenje za instaliranje slede�eg CD-a. Pritisnite "
"'Odbijam' \n"
"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
"\n"
"\n"
"Neke komponente sadr�ane u slede�im CD medijama nisu pod\n"
"GPL Licencom ili sli�nim ugovorima. Svaka takva komponenta je onda "
"uslovljena\n"
"uslovima i ugovorima sopstevene lincence. \n"
"Pa�ljivo pro�itajte i upoznajte se sa takvim specifi�nim licencama pre \n"
"nego uotrebite ili redistribuirate pomenute komponente. \n"
"Takve licence �e u glavnom zabranjivati transfer, kopiranje \n"
"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
"Bilo koji deo ugovora koji nije ispo�tovan istovremeno uklanja i ostala va�a "
"prava\n"
"u datoj licenci. Ukoliko vam odre�ena licenca ne garantuje takva\n"
"prava, obi�no ne mo�ete instalirati programe na vi�e od jedanog\n"
"aiatema, ili ih prilagoditi da se mogu koristiti na mre�i. Ukoliko ste u "
"dilemi, molimo vas da direktno \n"
"kontaktirate distributera ili editora komponente. \n"
"Prenos na tre�e programe ili kopiranje takvih komponenti uklju�uju�i i\n"
"dokumentaciju je obi�no zabranjen.\n"
"\n"
"\n"
"Sva prava na komponente na slede�im CD medijama pripadaju njihovim \n"
"respektativnim autorima i za�ti�ene su zakonima o intelektuanoj svojini i \n"
"pravima koji se primenjuju na softverske programe.\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Expert mode"
msgstr "Ekspert mod"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Ukloni ovaj �tampa� iz Star Office/OpenOffice.org/GIMP"

#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
"servera."

#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr "Mikronezija"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 milijarde boja (32-bitna paleta)"

#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr "Licenca"

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Generisanje tastera mo�e da potraje par trenutaka."

#: ../../standalone/draksec:1
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu allows you to select one of the six preconfigured "
"security levels\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr "Auto-detekcija �tampa�a (Lokalni, TCP/Socket, i SMB �tampa�i)"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (koristi pppoa) usb"

#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Dogodila se gre�ka - nije na�en ispravan ure�aj na kojem bi bili krerani "
"novi datote�nog sistemi. Proverite va� hardver da vidite �ta je uzrok ovog "
"problema."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Pokreni sistem za �tampanje pri staranju sistema"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Da li �elite da startujete konektovanje pri startanju sistema ?"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Processor ID"
msgstr "ID procesora"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr "Pomo� za pode�avanje zvuka"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Poljski (qwerty raspored)"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Add Printer"
msgstr "�tampa�"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktivnosti preko CD:\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Sada treba da instalirate sistem za �tampanje %s na sistemu koji se nalazi u "
"%s sigurnosnom nivou.\n"
"\n"
"Ovaj sistem za �tampanje pokre�e demon (pozadinski proces) koji �eka na "
"poslove �tampanja i upravlja njima. Ovaj demon je tako�e dostupan preko "
"udaljenih ma�ina preko mre�e pa je time podlo�an napadima. Zbog toga samo "
"par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.\n"
"\n"
"Da li stvarno �elite da podesite �tampanje na ovoj ma�ini?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Host \"%s\", port %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Ova particija ne mo�e biti kori��ena za loopback "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "Datoteka ve� postoji.Da li da ga koristim ?"

#: ../../standalone/net_monitor:1
#, c-format
msgid "received: "
msgstr "primljeno: "

#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "Desni Alt taster"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "lista alternativnih drajvera za ovu zvu�nu karticu"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr "Tunis"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing"
msgstr "Zajedni�ko deljenje skenera"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "Kliknite na ure�aj u levom stablu da bi ovde prikazali informacije."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Allow/Forbid autologin."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli autologovanje."

#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
msgstr "XawTV nije instaliran!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Ne uklju�uj kriti�ne fajlove (passwd, group, fstab)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "old static device name used in dev package"
msgstr "staro stati�ko ime ure�aja kori�teno u dev paketu"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i prijavljivanje IPv4 strange paketa."

#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "Ova oznaka je ve� u upotrebi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodo�li u �arobnjak za pode�avanje �tampa�a\n"
"\n"
"Ovaj �arobnjak �e vam pomo�i da instalirate svoj(e) �ampa�(e) povezane na "
"ovaj ra�unar, poezan direktno na mre�u.\n"
"\n"
"Ukoliko imate �tampa�(e) povezane na ovu ma�inu, priklju�ite ih na ra�unar i "
"u elektri�no napajanje da bi mogli biti auto-detektovani. Tako�e i mre�ni "
"�tampa�(i)moraju  biti povezani i uklju�eni.\n"
"\n"
"Nemojte da zaboravite da auto-detekcija �tampa�a na mre�i traje du�e nego za "
"�tampa�e koji se nalaze poveani direktno na va� ra�unar. Zato isklju�ite "
"auto-detekciju mre�nih �tampa�a ako vam to nije potrebno.\n"
"\n"
"Kliknite na \"Slede�i\" kada ste spremni, i na \"Poni�ti\" ako ne �elite da "
"sada pode�avate va� �tampa�(e)."

#: ../../keyboard.pm:1
#, c-format
msgid "Greek (polytonic)"
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Posle formatiranja particije %s,svi podaci na ovoj particiji �e biti "
"izbrisani"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection Time: "
msgstr "Vreme konekcije: "

#: ../../standalone/livedrake:1
#, c-format
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Ubacite va� Instalacioni CD u pogon i pritisnite OK kada ste spremni.\n"
"Ukoliko ga nemate pritisnite Poni�ti da bi izbegli live upgrade."

#: ../../standalone/drakperm:1
#, c-format
msgid "Use group id for execution"
msgstr "Koristi id grupe za izvr�avanje"

#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "Izaberite default (osnovnog) korisnika:"

#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"�tampa�e na udaljenom CUPS serveru ne moraju da budu pode�eni ovde; ovi "
"�tampa�i �e biti automatski detektovani."

#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Mo�ete izabrati drugi jezik koji �e biti dostupan posle instalacije "

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""
"Unesite direktorijum (ili modul) da\n"
" bi postavili backup na ovaj host."

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "Domen"

#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Defini�i veli�inu RAM ako je potrebno (detektovano je %d MB)"

#: ../../help.pm:1
#, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader."
msgstr ""

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "Provajderov dns 2 (opciono)"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Boot device"
msgstr "Startni (boot) ure�aj"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Kojoj particiji  �elite da promenite veli�inu?"

#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "United States Minor Outlying Islands"

#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "D�ibuti"

#: ../../standalone/logdrake:1
#, c-format
msgid "A tool to monitor your logs"
msgstr "Alat za pregledanje log datoteka"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "Detektovano na portu %s"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafi�ka kartica: %s\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/Set as _Default"
msgstr " (Podrazumevano)"

#: ../../security/l10n.pm:1
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC serija (serijski)"

#: ../../standalone/drakboot:1
#, c-format
msgid "Splash selection"
msgstr "Splash selekcija"

#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Extended particija nije podr�ana na ovoj platformi"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN Konfiguracija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "veliki"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing"
msgstr "Deljenje internet konekcije"

#: ../../standalone/logdrake:1
#, c-format
msgid "Choose file"
msgstr "Izaberi datoteku"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Summary: "
msgstr "Sa�etak"

#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Upozorenje ! Postoje�a firewalling konfiguracija je detektovana. Mo�da�e "
"biti potrebno ru�no pode�avanje nakon instalacije."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Kartica za pristup �tampanje/Foto na \"%s\""

#: ../../security/l10n.pm:1
#, c-format
msgid "Daily security check"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Da li �elite da omogu�ite �tampanje na �tampa�ima koji su gore pomenuti na "
"lokalnoj mre�i?\n"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "Selekcija modela �tampa�a"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Generi�ki PS2 mi� sa to�ki�em"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Uklanjam stari �tampa� \"%s\" ..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Select a device !"
msgstr "Izaberite ure�aj !"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected server"
msgstr "Ukloni selektovani server"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr "Sagem (koristi dhcp) usb"

#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "Francuske Ju�ne Teritorije"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the processor"
msgstr "imee prizvo�a�a procesora"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Cvi podaci na ovoj particiji bi trebali biti sa�uvani"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "Instaliram paket %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "Proveravam ure�aj i pode�avam HPOJ..."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Da bi omogu�ili kreiranje jo� (extended) particija izbri�ite jednu od "
"postoje�ih"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"Va� �tampa� se automatski pode�ava da bi vam dao pristup za foto kartice iz "
"va�eg PC-ja. Sada mo�ete da pristupite va�im foto karticama koriste�i se "
"grafi�kim programom \"MtoolsFM\" (Meni: \"Aplikacije\" -> \"Fajl alati\" -> "
"\"MTools Fajl Menad�er\") ili naredbom iz komandne linije \"mtools"
"\" (unesite \"man mtools\" u komandnoj liniji za vi�e informacija). Prona�i "
"�ete fajl sistem kartice po oznakom \"p:\", ili potonjim slovom kada imate "
"vi�e od jednog HP �tampa�a sa foto ure�ajima. U \"MtoolsFM\" mo�ete da "
"zamenite slova ure�ajima sa poljem koje se nalazi u gonjem-desnom uglu liste "
"fajlova."

#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "Paketi za instalaciju"

#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "SVE postoje�e particije i podaci na disku %s �e biti izgubljeni"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "Va� sistem nema dovoljno mesta za instalaciju ili a�uriranje (%d > %d)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Svaki �tampa� mora da ima ime (na primer \"�tampa�\"). Polja za Opis i "
"Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
"\"�tampa�\": ako kliknete na taster \"Bez �tampa�a\" pokrenuti �ete "
"konfiguracioni\n"
"program za �tampa�e. Pogledajte i odgovoaraju�e upustvo u``Starter\n"
"Guide'' za vi�e informacija o tome kako da podesite novi �tampa�. Program "
"koje se\n"
"tada aktivira je sli�an onom koji se koristi tokom instalacije."

#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "Butan"

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface"
msgstr "Mre�ni interfejs"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnection from Internet failed."
msgstr "Diskonektovanje sa Interneta nije uspelo."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "U�itavam podatke za �tampa� ..."

#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "Korejanska tastatura"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Not connected"
msgstr "Nije konektovan"

#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "Gr�ki"

#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Sveti Kits i Nevis"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Generi�ki 3 tastera mi�"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Transfer je bio uspe�an\n"
"Ako �elite da porverite mo�ete se prijaviti na server sa:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"bez tra�enja lozinke."

#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "Omogu�i OF startanje?"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Ne mo�ete koristiti JFS za particije manje od 16MB"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Proverite da li �elite izbri�ete va� RW medij (1 sesiju)"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor - vertikalno osve�avanje: %s\n"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "Ta�ka montiranja"

#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"pojavila se gre�ka:\n"
"%s\n"
"Poku�ajte da promenite neke od parametara"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP host \"%s\", port %s"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "User :"
msgstr "korisnik:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore system"
msgstr "Obnovi sistem"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""
"Ovo su ma�ine  na kojima se nalaze lokalno povezani skener(i) koji bi "
"trebali biti dostupni:"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
msgstr "DHCP krajnji ip"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "Jo� jedan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "Kolumbija"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Trenutna konfiguracija za `%s':\n"
"\n"
"Mre�a: %s\n"
"IP adresa %s\n"
"IP atributi: %s\n"
"Drajver: %s"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "Detalji"

#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Iz sigurnosnih razloga, on �e sada biti diskonektovan."

#: ../../standalone/drakbug:1
#, c-format
msgid "Synchronization tool"
msgstr "Alat za sinhronizaciju"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking your system..."
msgstr "Proveravam va� sistem..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "�tampaj"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Ubacite traku za oznakom %s\n"
" u ure�aj za trake %s"

#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr "Mongolija"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "Montirano\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "Konfigurisanje X-a"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "Grafi�ki interfejs"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Users"
msgstr "Obnovi korisnike"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Encryption key for %s"
msgstr "Klju� za enkripciju"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Do you want to recover your system?"
msgstr "Da li �elite da koristite aboot ?"

#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmaper uravlja  RPC konekcijama,koje koriste\n"
"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na ma�inama\n"
"koje rade kao serveri za protokole koji koriste RPC mehanizam."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detected hardware"
msgstr "Detektovani hardver"

#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr "Mauricijus"

#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Mijanmar (Burma)"

#: ../../fs.pm:1
#, c-format
msgid "Enabling swap partition %s"
msgstr "Omogu�avam swap particiju %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Ne postoje FAT particije kojima se mo�e promeniti veli�ina (ili nema "
"dovoljno slobodnog prostora)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "Jermenski (stari)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"�tampa� \"%s\" ve� postoji pod  %s. \n"
"Klikni na \"Prebaci\" da bi pre�li preko starog.\n"
"Mo�ete ukucati i novo ime ili presko�iti ovaj �tampa�."

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform."
msgstr ""
"Prona�ite re�enja za va�e probleme preko MandrakeSoft-ove online platforme "
"za podr�ku"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", host \"%s\", port %s"

#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr "Monako"

#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "Particioniranje nije uspelo: %s"

#: ../../fs.pm:1 ../../swap.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s Formatiranje  %s nije uspelo"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Canada (cable)"
msgstr "Kanada (kabl)"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Floppy creation completed"
msgstr "Povezivanje zavr�eno."

#: ../../help.pm:1
#, c-format
msgid "Upgrade"
msgstr "A�uriranje"

#: ../../help.pm:1
#, c-format
msgid "Workstation"
msgstr "Radna stanica"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instaliram pakete %s\n"
"%d%%"

#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgistan"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on USB"
msgstr ", multi-funkcionalni ure�aj na USB"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "Sa osnovnom dokumentacijom (preporuka!)"

#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron -  podesite period.komande"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Morate imati  root particiju.\n"
"Za ovo, kreirajte particiju (ili kliknite na postoje�u).\n"
"Zatim izaberite \"Ta�ka montiranja\" i podesite na `/'"

#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr "Zapadna Sahara"

#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy treba da bude http://..."

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr "Ju�na Afrika"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "Koristi traku za backup"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Etherboot Floppy/ISO"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "Izmena konfiguracije �tampa�a"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "Izaberite particiju"

#: ../../standalone/drakperm:1
#, c-format
msgid "Edit current rule"
msgstr "Uredi trenutno pravilo"

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s"
msgstr "%s"

#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "Molim Vas da testirate mi�a"

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "3 buttons with Wheel emulation"
msgstr "Emulacija tastera"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Sticky-bit"
msgstr "sticky-bit"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
msgstr "Drugi Medij"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files"
msgstr "Backup-uj sistemske fajlove"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"

#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr "Katar"

#: ../../any.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Ne mo�ete selektovati ovaj paket jer nema vi�e slobodnog prostora"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "generate auto-install floppy"
msgstr "Kreiraj auto instalacionu disketu"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "Mod za biranje"

#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr "Zajedni�ko deljenje fajlova"

#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "O�isti /tmp pri svakom startanju"

#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr "Malavi"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "local config: false"
msgstr "Lokalne datoteke"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "System settings"
msgstr "Custom disk particioniranje"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "Izaberite tip mi�a."

#: ../../standalone/harddrake2:1
#, c-format
msgid "class of hardware device"
msgstr "klasa hardverskog ure�aja"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Ovo su ma�ine i mre�e na kojima se nalaze lokalno povezani �tama�(i) koji bi "
"trebali biti dostupni:"

#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "Velika Britanija"

#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "pokrenuto"

#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "Indonezija"

#: ../../standalone/draksec:1
#, c-format
msgid "default"
msgstr "default"

#: ../../standalone/drakxtv:1
#, c-format
msgid "France [SECAM]"
msgstr "Francuska [SECAM]"

#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "ograni�eno"

#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "mora imati"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS ne podr�ava �tampa�e na Novell serverima ili �tampa�ima koji �alju "
"podatke u slobodno-formiranu komandu.\n"

#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Command line"
msgstr "Komandna linija"

#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies\", are available on our e-store:"
msgstr ""
"�iroki raspon Linux re�enja, kao i slecijalnih ponuda proizvoda i 'goodies'-"
"a, je dostupan i preko Interneta u na�em e-marketu:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "March"
msgstr "Mart"

#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "pristup administrativnim fajlovima"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""
"Gre�ka pri slanju mail-a\n"
"  va� izve�taj nije poslan\n"
"  Podesite sendmail"

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr "Monserat"

#: ../../help.pm:1
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "Swap"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Custom settings"
msgstr "Custom disk particioniranje"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Other"
msgstr "Obnovi ostalo"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "TV katica"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "�tampa� na SMB/Windows 95/98/NT serveru"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Configure CUPS"
msgstr "Konfigurisanje X-a"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ", "
msgstr ", "

#: ../../standalone/drakbug:1
#, c-format
msgid "Submit lspci"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected host/network"
msgstr "Ukloni selektovanog hosta/mre�u"

#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix je  Mail Transport Agent,koji u stvaripreme�ta po�tu sa jedne ma�ine "
"na drugu."

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Uzbek (cyrillic)"
msgstr "Srpski (�irilica)"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Ovde mo�ete izabrati taster ili kombinaciju tastera koja �e \n"
"dozvoliti izmenu rasporeda tastatura\n"
"(npr: latin i non latin)"

#: ../../network/network.pm:1
#, c-format
msgid "Network Hotplugging"
msgstr "Direktno priklju�ivanje na mre�u"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "ukoliko je pode�eno na da, izve�taj o proveri po�aljite na tty."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From CD"
msgstr "Obnovi sa CDa"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Va� ra�unar mo�ete podesiti za deljenje njegove Internet konekcije.\n"
"sa ovom opcijom, drugi kompjuteri na va�oj lokalnoj mre�i �e mo�i da "
"koristeInternet konekciju sa ovog ra�unara.\n"
"\n"
"Proverite da li je pode�ena va�a Mre�ni/Internet pristup preko drakconnect "
"pre nego �to nastavimo.\n"
"\n"
"Napomena: potrebana vam je mre�na kartica da bi podesili lokalnu mre�u(LAN)."

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
"Izaberite mre�ni adapter koji �elite da koristite za konekciju na internet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""
"Pristup Foto memorijskoj kartici na va�em HP multi-funkcionalnom ure�aju"

#: ../../share/advertising/09-mdksecure.pl:1
#, fuzzy, c-format
msgid ""
"Enhance your computer performance with the help of a selection of partners "
"offering professional solutions compatible with Mandrake Linux"
msgstr ""
"MandrakeSoft radi zajedno sa velikim brojem kompanija nude�i profesionalna "
"re�enja kompatibilna sa Mandrake Linux-om. Lista ovih partnera je dostupna u "
"MandrakeStore"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Authors: "
msgstr "Autori"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Deljenje internet konekcije je onemogu�eno."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "ukoliko je pode�eno na da, proverite checksum za suid/sgid fajlove."

#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "Latino-Ameri�ki"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "Promenite sistem za �tampanje"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Old device file"
msgstr "Stari fajl ure�aja"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "Info: "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "Taster `%s': %s"

#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "Samo momenat..."

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "None"
msgstr "Neijedan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Une�ena IP adresa nije ispravna.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""
"Proverite da li je cron demon uklju�en u va�e servise. \n"
"\n"
"Mo�ete primetiti da svi 'net' mediji tako�e koriste hard disk."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Ethernet Card"
msgstr "Mre�na kartica"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "Izbri�i odabrano pravilo"

#: ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "Info"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "Instaliraj"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Kliknite na \"Slede�e ->\" ukoliko �elite da izbri�ete sve podatke i \n"
"particije na ovom hard disku.Budite pa�ljivi, posle klika na \"U redu\", vi\n"
"ne�ete mo�i da povratite bilo koji podatak ili particiju na hard disku,\n"
"pa i bilo koje Windows podatke.\n"
"\n"
"Kliknite na \"<- Pprethodno\" da bi poni�ti ovu operaciju bez gubljenja "
"podataka i\n"
"particija koje su prisutne na ovom hard disku."

#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "Izlaz iz instalacije"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Sve je pode�eno.\n"
"Sada mo�ete deliti Internet konekciju sa drugim kompjuterima na va�oj "
"lokalnoj mre�i  (LAN), koriste�i automatsku mre�nu konfiguraciju (DHCP)."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "Udaljeni CUPS server"

#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "Sun Mi�"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Postoji samo jedan konfigurisan mre�ni adapter na va�em sistemu:\n"
"\n"
"%s\n"
"\n"
"Sada podeavam va�u lokalnu mre�u sa ovim adapterom."

#: ../../standalone/drakbug:1
#, c-format
msgid "Submit cpuinfo"
msgstr ""

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "Minimalno instaliraj"

#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "Etiopija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "YES"
msgstr ""

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr "Devanagri"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- pci ure�aji: ovo nam daje PCI slot, ure�aj i funkciju za ovu karticu\n"
"- eide ure�aji: ure�aj je ili slave ili master\n"
"- scsi ure�aji: scsi bus i id scsi ure�aja"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukupna veli�ina: %d / %d MB"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "disabled"
msgstr "onemogu�eno"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Search for new scanners"
msgstr "Tra�im nove skenere"

#: ../../standalone/drakgw:1
#, c-format
msgid "Disabling servers..."
msgstr "Uklanjam servise..."

#: ../../standalone/drakboot:1
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Instalacija %s-a neuspela. Gre�ka je:"

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "Ne mogu da pokrenem mkinitrd -f /boot/initrd-%s.img %s."

#: ../../install_any.pm:1
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Vi ste izabrali slede�e servere: %s\n"
"\n"
"\n"
"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
"sigurnosnih\n"
"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
"ih a�urirati\n"
"�to je pre mogu�e.\n"
"\n"
"\n"
"Da li zaista �elite da instalirate ove servise?\n"

#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Mre�ni �tampa� (TCP/Socket)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup User files..."
msgstr "backup-ovanje korsinikovih fajlova"

#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "Instaliraj sistem"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "Prvi DNS Server (opcija)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"Alternativno, mo�ete da odredite ime/ime fajla ure�aja u liniju za unos"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"Argumenti: ()\n"
"\n"
"Ukoliko je SERVER_LEVEL (ili je SECURE_LEVEL odsutan) ve�i od 3\n"
"u /etc/security/msec/security.conf, kreira simboli�ki link /etc/security/"
"msec/server\n"
"da upu�uje na /etc/security/msec/server.<SERVER_LEVEL>.  /etc/security/msec/"
"server\n"
"se koristi od strane chkconfig --add da bi dodali servis ukoliko je prisutan "
"u fajlu\n"
"tokom instalacije paketa."

#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Phonetic)"
msgstr "Ruski (Fonetski)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Config..."
msgstr "dhcpd Konfiguracija..."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, but it's currently disabled."
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno ali je trenutno "
"onemogu�eno."

#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub instalacija"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "Jevrejski"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "�tampa� \"%s\" na serveru \"%s\""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr "Disketu sada mo�ete da izbacite iz ure�aja"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "Minimalno instaliraj"

#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "Danska"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "Preme�tanje particije..."

#: ../../standalone/drakgw:1
#, c-format
msgid "(This) DHCP Server IP"
msgstr "(Ovaj) DHCP server IP"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "Testiranje konfiguracije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing %s ..."
msgstr "Instaliram %s ..."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each other such\n"
"that installation of a package requires that some other program is also\n"
"rerquired to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Na kraju, u zavisnosti od va�eg izbora da da birate pojedina�ne pakete\n"
"ili ne, bi�e vam prikazano stablo sa svim paketima klasifikovanim\n"
"po grupama i podgrupama. Dok pretra�ujete stablo, mo�ete selektovati cele\n"
"grupe, podgrupe, ili individualne pakete.\n"
"\n"
"Kada kod selektujete paket na stablu, opis se pojavljuje sa desne\n"
"strane. da bi mogli da se upoznate namenom paketa.\n"
"\n"
"!! Ukoliko je server paket izabran slu�ajno ili kao deo\n"
"cele grupe, bi�ete upitani da li zaista �elite da instalirate\n"
"ponu�ene servere. Pod Mandrake Linux-om, svi instalirani\n"
"serveri se startuju po default-u za vreme podizanja sistema. �ak i ako su "
"sigurni i nemaju\n"
"poznatih bezbednosnih propusta do vremena izlaska distribucije, mo�e se "
"desiti\n"
"da sigurnosne rupe budu otkivene kasnije.\n"
" Ukoliko ne znate koji pojedina�ni servis �ta treba da radi\n"
"ili za�to se instalira, onda kliknite \"Ne\". Klikom na \"Da\" �ete\n"
"instalirati prikazane servis i oni �e biti pokrenuti automatski po\n"
"default-u. !!\n"
"\n"
"Opcija  \"Automatske me�uzavisnosti\" jednostavno isklju�uje dijalog sa "
"upozorenjem\n"
"koji se javlja svaki put kada instaler automatski selektuje pakete. Ovo se\n"
"javlja zato �to on odre�uje da mora da zadovolji zavisnosti sa drugim\n"
"paketom da bi uspe�no zavr�io instalaciju.\n"
"\n"
"Mala ikonica flopi diska na dnu liste vam omogu�ava da u�itate\n"
"listu paketa birane tokom prethodne instalacije. Klikom na ovu ikonicu\n"
"�e od vas biti tra�eno da ubacite disketu kreiranu ranije na kraju \n"
"prethodne instalacije. Pogledajte poslednji pasus (korak) da bi nau�ili kako "
"da kreirate \n"
"takvu disketu."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Izaberite klju� za enkripciju fajl sistema"

#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr "Sijera Leone"

#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "Bocvana"

#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "Andora"

#: ../../standalone/draksec:1
#, c-format
msgid "(default value: %s)"
msgstr "(podrazumevana vrednost: %s)"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""
"Argumenti: (max, inactive=-1)\n"
"\n"
"Podesite lozinku ciljaju�i na \\fImax\\fP dana i izmena pauze na  "
"\\fIinactive\\fP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Alternativna test stranica"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""
"DHCP Server Konfiguracija.\n"
"\n"
"Ovde mo�ete odabrati razli�ite opcije za DHCP server konfiguraciju.\n"
"Ukoliko ne znate zna�enje neke opcije, jednostavno je nemojte menjati.\n"
"\n"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Choose an X server"
msgstr "Izaberite X server"

#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "Veli�ina Swap particije u MB:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No changes to backup!"
msgstr "Nema izmena za backup!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "Formatirano\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "Tip instalacije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "�tampa� \"%s\" na SMB/Windows serveru \"%s\""

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr "%d odvojeni brojevi sa zarezom"

#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokol omogu�ava korisnicima na mre�i da otkriju ko je\n"
"ulogovan na drugim ma�inama."

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Pode�avanje automatizovanih koraka"

#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"Want to know more and to contribute to the Open Source community? Get "
"involved in the Free Software world!"
msgstr ""
"Da li �elite da saznate vi�e o Open Source zajednici? Priklju�ite se svetu "
"Bespatnog Softvera!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to backup..."
msgstr "Izaberite podatke koji �elite da backup-ujete..."

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"povezivanje neuspelo.\n"
"Proverite va�u konfiguraciju u Mandrake Kontrolnom Centru."

#: ../../standalone/net_monitor:1
#, c-format
msgid "received"
msgstr "primljeno"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogu�avanje su samo za korisnije wheel grupe ili za svakog korisnika."

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_New"
msgstr "/Datoteka/_Nova"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DNS Server IP"
msgstr "DNS server IP"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range End:"
msgstr "Kraj IP raspona:"

#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "Velika"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "Dodaj korisnika u sistem"

#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "this field describes the device"
msgstr "Ovo polje opisuje ure�aj"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodajem �tampa� u Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "Lokalni �tampa�i"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation image directory"
msgstr "Instalacioni image direktorijum"

#: ../../any.pm:1
#, c-format
msgid "NIS Server"
msgstr "NIS Server"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Port: %s"
msgstr "Port: %s"

#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr "�panija"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: %s"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "Ovo korisni�ko ime ve� postoji"

#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "Izaberite fajl"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Apply"
msgstr "Promeni"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Auto-detect available ports"
msgstr "Autodetekcija dostupnih portova"

#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Deljenje internet konekcije je trenutno onemogu�eno"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "Belgija"

#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "Kuvajt"

#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "Izaberite window menadzer koji �elite da koristite:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "December"
msgstr "Decembar"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "sub generation of the cpu"
msgstr "Pod generacija za procesor"

#: ../../standalone/drakbug:1
#, c-format
msgid "First Time Wizard"
msgstr "�arobnjak po prvi put"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Gre�ka, ali neznam kako da je razre�im.\n"
"Nastavite na va� rizik!"

#: ../../lang.pm:1
#, c-format
msgid "Taiwan"
msgstr "Tajvan"

#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: ../../standalone/logdrake:1
#, c-format
msgid "please wait, parsing file: %s"
msgstr "molim Vas sa�ekajte, parsiram datoteku: %s"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "Importance: "
msgstr "Va�no: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Da bi mogli da �tampate na va�em Lexmark inkjet �tampa�u morate da imate "
"drajvere koje je kreirao Lexmark (http://www.lexmark.com/).Kliknite na "
"taster \"Drajveri\".  nakon toga izaberite va� model i operativni sistem, u "
"va�em slu�aju \"Linux\". Drajveri su upakovani u RPM pakete ili shell "
"skripte sa interaktivnom grafi�kom instalacijom. Ne morate da dradite ovu "
"konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o licenci. Onda "
"i�tampajte printhead alignment stranice sa \"lexmarkmaintain\" a podesite "
"opcije za polo�aj glave sa ovim programom."

#: ../../standalone/drakperm:1
#, c-format
msgid "Permissions"
msgstr "Dozvole"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Ime provajdera (npr. provider.net)"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Va� sistem ima manjak snage. Usled toga mo�ete imati problema pri "
"instalaciji\n"
"Mandrake Linux. Ukoliko se oni pojave, mo�ete probati tekstualnu "
"instalaciju. Da bi to postigli,\n"
"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Koristi Windows particiju za loopback"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "Jermenski (typewriter)"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connection type: "
msgstr "Tip konekcije: "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Graphical interface"
msgstr "Grafi�ki interfejs"

#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "�ad"

#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "Indija"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s sa 3D hardverskom akceleracijom"

#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr "Slava�ka"

#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr "Singapur"

#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "Kambod�a"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor - horizontalna frekvencija: %s\n"

#: ../../standalone/drakperm:1
#, c-format
msgid "Path"
msgstr "Putanja"

#: ../../standalone/drakbug:1
#, c-format
msgid "NOT FOUND"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Ovde mo�ete da odredite bilo koji komandnu liniju na koji zadatak za �tampa� "
"treba da bude upu�en umesto da se direktno �alje na �tampa�."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Sistem za �tampanje (%s)ne�e biti automatski pokrenut pri startanju ma�ine.\n"
"\n"
"Mogu�e je automatsko startanje isklju�eno promenom na vi�lji nivo "
"sigurnosti, zbog toga �to je sistem za �tampanje primamljiv za napade.\n"
"\n"
"Da li ponovo �elite da automatski startujete sistem za �tampanje ?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"�tampa� %s\n"
"Da li ho�ete da izmenite opcije za ovaj �tampa�?"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add host"
msgstr "Dodaj hosta"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Ukoliko zaista mislite da znate koji je pravi drajver za va�u karticu\n"
"mo�ete izabrati jednu sa gornje liste.\n"
"\n"
"Trenutni drajver za va�u \"%s\" zvu�nu karticu je \"%s\" "

#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Da li bi �eleli da dozvolite korisnicima zajedni�ki dele neke od svojih "
"direktorijuma?\n"
"Da bi ovo mogli da omogu�ite jednostavno kliknite na \"Share\" u konqueror-u "
"ili nautilus-u.\n"
"\n"
"\"Custom\" dozvoljava detaljnija per-user pode�avanja.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Molim Vas da izaberete u�itavanje ili snimanje selekcije paketa na disketu.\n"
"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."

#: ../../standalone/drakxtv:1
#, c-format
msgid "China (broadcast)"
msgstr "Kina (broadcast)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use quota for backup files."
msgstr "Koristi quota zar backup fajlove"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Pode�avam �tampa� \"%s\" ..."

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Internet konekcija"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Podizanje modula %s neuspelo.\n"
"Da li �elite poku�ate ponovo sa drugim parametrima ?"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world."
msgstr "Dobrodo�li u Svet Open Source-a"

#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosna i Hrecegovina"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Potreban vam je pravi datote�ni sistem (ext2/ext3, reiserfs, xfs, ili jfs) "
"za ovu ta�ku montiranja\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Molim Vas unesete ime hosta ili IP adresu.\n"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "Holandija"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "�aljem fajlove..."

#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr "Interna  ISDN kartica"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Ne postoji poznati alternativni OSS/ALSA drajver za va�u zvu�nu karticu (%s) "
"koja trenutno koristi \"%s\""

#: ../../network/modem.pm:1
#, c-format
msgid "Title"
msgstr "Naziv"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install & convert Fonts"
msgstr "Instliraj i konvertuj fontove"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WARNING"
msgstr "UPOZORENJE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "Instaliram starter"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "replay"
msgstr "ponovi"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr "detektovano %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Devi�anska Ostrva (S.A.D)"

#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr "Lo�e backup-ovana datoteka"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno.\n"
"Trenutno je onemogu�eno.\n"
"\n"
"�ta �elite da uradite?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "Unesite IP adresu i port hosta �ije �tampa�e �elite da koristite."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Pipe into command"
msgstr "Ubaci u komandu"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Neke hardverske komponente u va�em ra�unaru zahtevaju odgovaraju�e drajvere "
"da bi normalno funkcionisale.\n"
"Informacije o njima mo�ete prona�i na: %s"

#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "Detektujem  ure�aje..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Opis za polja:\n"
"\n"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "Basic options"
msgstr "DrakSec Osnovne Opcije"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "the name of the CPU"
msgstr "Ime prizov�a�a ure�aja"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Prihvati/Odbij IPv4 poruke o gre�kama."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "Osve�avam podatake o �tampa�u..."

#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "Morate i %s da formatirate"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "PA�LJIVO,ova operacija je opasna."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Ubacite disketu koja sadr�i selekciju paketa"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "Server:"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Alerts:"
msgstr "Sigurnosni alarmi:"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "�vedska"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Expect for SSH"
msgstr "Koristi Expect za SSH"

#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr "Poljska"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "Ostali portovi"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "broj capture buffer-a za mmap'ed capture"

#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr "SMBus kontroleri"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Vreme pauze konekcije (u sek.)"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Neki rani i486DX-100 �ipovi ne mogu da se pouzdano vrate u operativno stanje "
"posle kori��enja \"halt\" instrukcije"

#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "Hrvatski"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "Koristi postoje�u particiju"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Ne mogu da kontaktiram miror %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Help/_About..."
msgstr "/Pomo�/_O..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remove user directories before restore."
msgstr "Ukloni korisni�ke direktorijume pre obnavljanja"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Treba da podesite udaljeni �tampa�. Za to vam je potreban mre�ni pristup, "
"ali va�a mre�a nije jo� pode�ena. Ukoliko nastavite bez mre�e konfiguracije, "
"ne�ete mo�i da koristite �tampa� koji sada pode�avate. Kako �elite da "
"nastavite?"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "CUPSkonfiguracija za deljenje �tampa�a"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font in your mounted partitions"
msgstr "ne mogu da prona�em nijedan font na montiranoj particiji"

#: ../../standalone/harddrake2:1
#, c-format
msgid "F00f bug"
msgstr "F00f bug"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Domain Name:"
msgstr "Ime domena:"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Root umask"
msgstr "Root lozinka"

#: ../../any.pm:1
#, c-format
msgid "On Floppy"
msgstr "Na disketu"

#: ../../security/l10n.pm:1
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore"
msgstr "Obnovi"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
"ukoliko je pode�eno na da, proverite da li su mre�ni ure�aji u promiscuous "
"modu."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "Tra�im pakete"

#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "Inicijalna poruka"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "Spasi tabelu particija"

#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "Kipar"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection complete."
msgstr "Povezivanje zavr�eno."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "Ukloni sa RAID-a"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Ova lozinka(enkripcioni klju�) je suvi�e jednostavna (treba da ima bar %d "
"znakova)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Configuration Wizards"
msgstr "�arobnjaci za konfiguraciju"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN konekcija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: ../../standalone/harddrake2:1
#, c-format
msgid "primary"
msgstr "primarno"

#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "na Windows serveru \"%s\", deljeni \"%s\""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Sada mo�ete odabrati koje servise �elite da se startaju pri podizanju "
"sistema.\n"
"\n"
"DrakX �e prikazati sve dostupni servise na trenutnoj\n"
"instalaciji. Pregledajte ih pa�ljivo i deselektujte one koji vam ne�e biti "
"uvek\n"
"potrebni pri podizanju sistema.\n"
"\n"
"Mo�ete dobiti i kratko obja�njenje o servisu selektovanjem\n"
"odre�enog servisa. Me�utim, ukoliko niste sigurni koji od servisa jesu ili\n"
"nisu korisni, sigurnije je ostaviti na default postavkama.\n"
"\n"
"!!Na ovom nivou, budite veoma pa�ljivi ukoliko �elite da koristite  va�u "
"ma�inu kao\n"
"server: verovatno ne�ete �eleti da startujete nijedan servis koji vam ne�e\n"
"trebati. Zapamtite da nekoliko servisa mo�e biti opasno ukoliko\n"
"su omogu�eni na serveru. Generano govore�i, izaberite samo servise koje �ete "
"stvarno trebati.\n"
"!!"

#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr "Niue"

#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "Presko�i"

#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiviranje i deaktiviranje svih mre�nih interfejsa konfigurisanih za "
"start \n"
"pri podizanju sistema."

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"Frekvencija procesora u MHz (Mega herz koji u prvoj aproksimaciji mo�e biti "
"smatran za broj instrukcija koje procesor mo�e da izvr�i u sekundi)"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Mandrake Linux Printer Management Tool"
msgstr "Mandrake Linux Program za upravljanje korisnicima"

#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "va�no"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Total Progress"
msgstr "Ukupni napredak"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX sada treba da detektuje IDE ure�aje prisutne u ve�em ra�unaru.DrakX "
"�e \n"
"potra�iti PCI SCSI adapter(e). Ukoliko DrakX prona�e SCSI adapter(e) i bude "
"znao koji upravlja�ki program \n"
"(drajver) koristion �e ga(ih) automatski instalirati.\n"
"\n"
"Po�to se mo�e desiti da pri detekciji neka komponenta ne bude detektovana \n"
"DrakX �e vas upitati da li imate PCI SCSI adapter. Kliknite \"Da\" \n"
"ukoliko znate da imate SCSI adapter na svojoj ma�ini. Na prikazanoj listi \n"
"mo�i �ete da izaberete odgovoaraju�i.\n"
"Kliknite \"Ne\" ukoliko nemate SCSI adaptera u  ma�ini. Ukoliko niste \n"
"sigurni\n"
"proverite na listi detektovanog hardvera selektovanjem \"Pogledaj info o \n"
"hardveru\"i klikom na \"U redu\". Pregledajte\n"
"listu a onda kiknite na \"U redu\" da bi se vratili na pitanje o SCSI \n"
"ure�ajima.\n"
"\n"
"Ukoliko morate ru�no da specificirate va� PCI SCSI adapter, DrakX �e\n"
"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
"ispita adapter radi tih opcija. Ovo obi�no i uspe.\n"
"\n"
"Ukoliko DrakX nije u stanju da ispita opcije koje su potrebne, mora�ete da \n"
"sami odredite opcije za drajver.\n"
"Pogledajte i Instalacioni vodi� (3 poglavlje, sekcija \"Prikupljanje \n"
"informacija o va�em hardveru\")\n"
"da bi saznali kako da pribavite informacije o parametrima potrebnim za \n"
"hardver,sa svoje Windows instalacije (ukoliko je imate na sistemu),\n"
"dokumenatciju o hardveru, ili sa proizvo�a�evog \n"
"veb sajta (ukoliko imate pristup internetu)."

#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Users"
msgstr "Korisnici"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "Pripremam starter..."

#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (e.g. %s)"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "Nepodudarnost lozinki"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Primeri pravilnih IP adresa:\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr ""
"Izaberite\n"
"medij za backup."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Frequency (MHz)"
msgstr "Frekvenicja (MHz)"

#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Da bi koristili ovaj izbor za �uvanje selekcije paketa, izaberite "
"instalaciju sa ``linux defcfg=floppy''"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of the processor"
msgstr "Broj procesora"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Va� sistemski (BIOS) �asovnik je pode�en na GMT"

#: ../../network/isdn.pm:1
#, fuzzy, c-format
msgid "Do you want to start a new configuration ?"
msgstr "Da li ho�ete da testirate konfiguraciju?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "Odredite ime fajla"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Izaberite port na koji je va� ra�unar povezan."

#: ../../standalone/livedrake:1
#, c-format
msgid "Change Cd-Rom"
msgstr "Promeni Cd-Rom"

#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr "Paragvaj"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "Koju XFree konfiguraciju �elite da imate ?"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""
"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Ne postoji poznati drajver za va�u zvu�nu karticu (%s)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "force"
msgstr "silom"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "Izlaz"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"NAPOMENA: U zavisnosti od modela �tampa�a i sistema za �tampanje potrebno je "
"jo� %d MB dodatnog softera da se instalira."

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Vi nemate ni jedan interfejs koji je pode�en.\n"
"Morate ih prvo podesite klikom na 'Configure'"

#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "Estonski"

#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache je  WWW server. On se koristi da opslu�uje  HTML fajlove\n"
"i CGI."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"Unesite ime va�eg CD Writer ure�aja\n"
" ex: 0,1,0"

#: ../../standalone/draksec:1
#, c-format
msgid "ALL"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Clients"
msgstr "Dodaj/Izbri�i Klijente"

#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "Izaberite mre�ni interfejs"

#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Nepoznati Model"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD reza�i"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Boot particija po default-u\n"
"   (za podizanje MS-DOSa, ne za lilo)\n"

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "choose image"
msgstr "izaberite sliku"

#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Detektovana Firewalling konfiguracija"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Ime konekcije"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""
"x koordinata tekst boksa\n"
"u broju karaktera"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "A�uriranje selekcije paketa"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Gde biste da montirate loopback fajl %s?"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketa je uspe�no kreirana.\n"
"Sada mo�ete ponoviti va�u instalaciju."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Koristi CD/DVDROM za backup"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "the number of buttons the mouse has"
msgstr "Broj procesora"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "Ponavljanje"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup other files"
msgstr "Backup-uj ostale fajlove"

#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "Nepristupa�an disketni ure�aj"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files are corrupted"
msgstr "Backup fajlovi su korumpirani"

#: ../../standalone/drakxtv:1
#, c-format
msgid "TV norm:"
msgstr "TV sistem :"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid family"
msgstr "Cpuid familija"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "type: thin"
msgstr "tip: %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Litvanski AZERTY(novi)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr "sa zna�i da aritmeti�ki koprocesor ima prika�en dodatni vektor"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Izabrali ste softversku RAID particiju kao root (/).\n"
"Nijedan starter ne mo�e da radi sa tim bez /boot particije.\n"
"Zato treba da dodate /boot particiju"

#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Drugi OS-ovi (MacOS,BSD,...)"

#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "Da bi mogli da aktivirate mi�a"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "Pristupam  mre�u"

#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Snimci �e biti dostupni nakon instalacije u %s"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose which one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Jedna ili vi�e Microsoft Windows particija je detektovano \n"
"na hard disku. Izaberite koju od njih �elite da smanjite da bi instalirali\n"
"novi Mandrake Linux operativni sistem.\n"
"\n"
"Svaka particija je ispisana na slede�i na�in: \"Ime Linux-a\",\"Ime Windows-a"
"\"\n"
"\"Kapacitet\".\n"
"\n"
"\"Ime Linux-a\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj "
"hard diska\",\n"
"\"broj particije\" (na primer, \"hda1\").\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID ure�aj i \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
"diskovima:\n"
"\n"
" * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
" * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
" * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
" * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"Sa SCSI hard diskovima, \"a\" zna�i \"primarni hard disk\", a \"b\" zna�i "
"\"sekundarni hard disk \", itd.\n"
"\n"
"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi disk\n"
"ili particija se zove \"C:\")."

#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr "Tanzanija"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Prora�unavam granice FAT datote�nog sistema"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Backup Izvori: \n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "custom"
msgstr "Izbor po �elji"

#: ../../standalone/logdrake:1
#, c-format
msgid "Content of the file"
msgstr "Sadr�aj datotekse"

#: ../../any.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP Autentifikacija"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr "Doozvoli da izaberem bilo koji ure�aj"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Profile "
msgstr "Profil "

#: ../../standalone/net_monitor:1
#, c-format
msgid "transmitted"
msgstr "preba�eno"

#: ../../lang.pm:1
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr "%d odovojeni stringovi sa zarezom"

#: ../../network/netconnect.pm:1
#, c-format
msgid " isdn"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Ovde je predstavljena cela lista dostupnih tastatura"

#: ../../standalone/draksplash:1
#, c-format
msgid "Theme name"
msgstr "Ime teme"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Help"
msgstr "/_Pomo�"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Biram odgovaraju�i drajver"

#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "Kukova Ostrva"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Ovde mo�ete izabrati da li �elite da skeneri na ovoj ma�ini treba da budu "
"dostupni na drugim udaljenim ma�inama i na kojim udaljenim ma�inama."

#: ../../standalone/draksplash:1
#, c-format
msgid "the width of the progress bar"
msgstr "sirina trake sa prikazom napretka"

#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiranje particije %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hostname required"
msgstr "Potrebno je ime hosta"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselect fonts installed"
msgstr "Deselektovani fontovi instalirani"

#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "To�ki�"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Submit kernel version"
msgstr "Verzija kernela"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/drakgw:1 ../../standalone/drakperm:1
#: ../../standalone/draksec:1 ../../standalone/logdrake:1
#: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "Poni�ti"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for configured scanners ..."
msgstr "Tra�im pode�ene skenere ..."

#: ../../harddrake/data.pm:1
#, c-format
msgid "Videocard"
msgstr "Video kartica"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tBackup koristi tar i bzip2\n"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Remove Selected"
msgstr "Ukloni Selektovano"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _modems"
msgstr "/Autodetekcija _modema"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "Ukloni �tampa�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Last Log"
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Koji servise �elite da budu dostupni preko Inerneta?"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Connection Type"
msgstr "Tip konekcije :"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Dobrodo�li u alat za konfiguraciju el.po�te\n"
"\n"
"Ovde mo�ete da podesite alarmni sistem.\n"

#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakperm:1
#, c-format
msgid "Other"
msgstr "Drugo"

#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Default"
msgstr "Podrazumevano"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulacija 2 tastera"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Please enter a package name."
msgstr "Odredite korisni�ko ime"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Run chkrootkit checks"
msgstr "ukoliko je pode�eno na da, pokrenite chkrootkit provere."

#: ../../standalone/drakfont:1
#, c-format
msgid "type1inst building"
msgstr "kreiram type1inst"

#: ../../standalone/drakfont:1
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: ../../standalone/draksplash:1
#, c-format
msgid "choose image file"
msgstr "izaberite sliku"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "X server"

#: ../../any.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "Admin Korisni�ko ime Domena"

#: ../../standalone/drakxtv:1
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Gre�ka pri skeniranju TV kanala"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "US tastatura (internacionalna)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Not installed"
msgstr "Nije instalirano"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Both Alt keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "LAN konekcija"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/-"
msgstr "/Fajl/-"

#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "Italijanski"

#: ../../interactive.pm:1
#, c-format
msgid "Basic"
msgstr "Osnovno"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""
"\n"
" Sva prava (C) 2002 MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"

#: ../../install_messages.pm:1
#, c-format
msgid "http://www.mandrakelinux.com/en/92errata.php3"
msgstr "http://www.mandrakelinux.com/en/92errata.php3"

#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: ../../help.pm:1
#, c-format
msgid "pdq"
msgstr ""

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr " IO kartice"

#: ../../standalone/drakperm:1
#, c-format
msgid "when checked, owner and group won't be changed"
msgstr "kada je selektovana, vlasnik i grupa ne mogu biti promenjeni"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ovo je specijalna Bootstrap\n"
"particija i koristi se\n"
"dual-booting va�eg sistema.\n"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"izaberite za svaki korak da li �e biti istovetan i automatizovan ili�e biti "
"ru�no pode�avan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Tako�e mo�ete odlu�iti da li �elite da skeneri na udaljenim ma�inama budu "
"automatski dostupni na ovoj ma�ini."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Mre�a preko FTP.\n"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Reports check result to tty"
msgstr "ukoliko je pode�eno na da, izve�taj o proveri po�aljite na tty."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr "Morate uneti ure�aj ili ime fajla!"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_Quit"
msgstr "/_Kraj"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memorija na grafi�koj kartici: %s kB\n"

#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
" Ovaj program je bespaltan; mo�ete ga redistribuirati i/ili menjati\n"
" pod uslovima GNU General Public License kako je objavljeno\n"
" u Free Software Fondaciji; ili verziji 2, ili (u va�em slu�aju)\n"
" bilo kojoj novijoj verziji.\n"
"\n"
" Ovaj program je distribuiran u nadi da �e biti od koristi,\n"
" sli BEZ IKAKVIH GARANCIJA; �ak i bez garancije za\n"
" KORISNOST i PRAKTI�NU UPOTREBU.  Pogledajte\n"
" GNU Op�tu Javnu Licencu za vi�e detalja.\n"
"\n"
" Trebali bi da mate kopiju GNU Op�te Javne  Licence\n"
" zajedno sa ovim programom; ukoliko je nemate, pi�ite nam na adresu Free "
"Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"

#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "pristup alatima za kompajliranje"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
msgstr "Izaberite podatke za obnavljanje..."

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
"sektorana po�etku \n"
"diska)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "Standardna test stranica"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "Kreiraj"

#: ../../standalone/drakbackup:1
#, c-format
msgid "What"
msgstr "�ta"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "Gre�ka u listi paketa:"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Bugarski (BDS)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Server"
msgstr "Deaktiviraj Server"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "Klju� za enkripciju fajl sistema"

#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr "Gujarati"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Izaberite prvi broj od 10 koje �elite da editujete,\n"
"ili samo kliknite na Enter da bi nastavili.\n"
"Va� izbor? "

#: ../../standalone/draksplash:1
#, c-format
msgid "Save theme"
msgstr "Sa�uvajte temu"

#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "Brazil"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install"
msgstr "Autoinstalacija"

#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "�arobnjak za pode�avanje mre�e"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "Automontiranje prenosivog medija"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Enter the directory to save:"
msgstr "Unesite direktorijum da bi sa�uvali:"

#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "�tampanje"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "Nema �tampa�a koji su direktno povezani na va�u ma�inu"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "Kreiraj novu particiju"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "Drajver:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "unknown"
msgstr "Nepoznato"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "Koristi fdisk"

#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "pomerite to�ki� !"

#: ../../standalone/net_monitor:1
#, c-format
msgid "sent: "
msgstr "poslano: "

#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "Automatski IP"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"I stigli ste do kraja. Instalacija je sada zavr�ena i va� GNU/Linux sistem "
"je \n"
"spreman za upotrebu. Samo kliknite na \"Slede�i -\" da bi restartovali "
"sistem. Mo�ete pokrenuti\n"
"GNU/Linux ili Windows, �ta god vi�e preferirate (ukoliko imate instalirana "
"dva sistema), �im\n"
"se ra�unar ponovo pokrene.\n"
"\n"
"Taster Napredno \"%s\" (samo u Ekspert modu) prikazuje jo� dva tastera za:\n"
"\n"
" * \"kreiranje auto-instalacione diskete\": radi kreiranja instalacionog "
"flopi diska\n"
"koji �e automatski pokrenuti celu instalaciju bez pomo�i operatora\n"
", sli�no ovoj instalaciji koju ste upravo izveli.\n"
"\n"
"   Mo�ete primetiti da su dve razli�ite opcije dostupne nakon pritiska na "
"taster:\n"
"\n"
"    * \"Sa ponavljanjem\". Ovo je delom automatizirana instalacija jer korak "
"sa\n"
"particioniranjem diska ostaje interaktivan (samo on).\n"
"\n"
"    * \"Automatizovano\". Potpuno automatizovana instalacija: hard disk se u "
"potpunosti\n"
"formatizuje, i svi podaci �e biti izgubljeni.\n"
"\n"
"   Ova opcija je veoma korisna ukoliko izvodite veliki broj sli�nih "
"instalacija\n"
"na ve�em broju ma�ina. Pogledajte sekciju o auto instalaciji na na�em web "
"sajtu.\n"
"\n"
" * \"Sa�uvaj selekciju paketa\"(*) : snima selekciju paketa koji ste\n"
"napravili u ovoj instalaciji. Tako, da kada budete izvodili drugu "
"instalaciju, ubacite disketu\n"
"i pokrenete pomo�ni ekran pritiskom na\n"
"[F1] taster, i zahtevom za >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) Morate da iamte  FAT-formatiranu disketu (da bi je formatirali pod GNU/"
"Linux-om, ukucajte\n"
"\"mformat a:\")"

#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr "Moldavija"

#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "Pode�avanje udaljenog �tampa�a"

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "An online platform to respond to enterprise support needs."
msgstr ""
"Tu je online platforma koja treba da odgovori poebnim i specifi�nim "
"potrebama kompanija"

#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Url treba da po�inje 'ftp:' ili 'http:'"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Oriya"
msgstr "Sirija"

#: ../../standalone/drakperm:1
#, c-format
msgid "Add a new rule at the end"
msgstr "Dodaj novo pravilo na kraju"

#: ../../standalone/drakboot:1
#, c-format
msgid "LiLo and Bootsplash themes installation successful"
msgstr "Instalacija LiLo-a i Bootsplash tema uspela"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Tako�e mo�ete odlu�iti da li �elite da �tampa�i na udaljenim ma�inama budu "
"automatski dostupni na ovoj ma�ini."

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Mo�ete navesti njegove opcije za modul %s.\n"
"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
"Na primer, ``io=0x300 irq=7''"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Kraj bez snimanja promena u tabele particija?"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On Hard Drive"
msgstr "na Hard Disk"

#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "Instaliram pakete..."

#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "Danski"

#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "Angola"

#: ../../standalone/drakbackup:1
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Slede�i paketi treba da budu instalirani:\n"

#: ../../standalone/logdrake:1
#, c-format
msgid "service setting"
msgstr "pode�avanje servisa"

#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "Izbor po �elji"

#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "Letonija"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Fajl se ve� koristi od strane drugog loopback-a,izaberite drugi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "Samo-�itanje"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogu�i/Onemogu�i za�titu za name resolution spoofing.  Ako je\n"
"\\fIalert\\fP istinit, i to prijavite u syslog."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "Nema poznatog drajvera"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Ukoliko to nije onaj koji �elite da podesite, unesite ime/ime fajla ure�aja "
"u liniju za unos"

#: ../../standalone/draksound:1
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Zvu�na kartica nije detektovana na va�oj ma�ini. Proverite da li Linux-"
"supported zvu�na kartica pravilno priklju�ena.\n"
"\n"
"\n"
"Mo�ete posetiti na�u bazu podr�anog hardvera na:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
msgstr "Podesi lokalni mre�u..."

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "ukoliko je pode�eno na da, proverite checksum za suid/sgid fajlove."

#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Pokre�e sistem za zvuk na va�oj ma�ini"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Run some checks against the rpm database"
msgstr "ukoliko je pode�eno na da, pokrenite proveru rpm baze podataka."

#: ../../standalone/drakperm:1
#, c-format
msgid "Execute"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "Pripremam bazu podataka za �tampa�e..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information"
msgstr "Informacije"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "Nije prona�ena mre�na kartica"

#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "3 tastera"

#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "Koju  datote�ni sistem �elite ?"

#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr "Malta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "Detaljne informacije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"default opcije za �tampa�\n"
"\n"
"Proverite da li su veli�ina papira i vrsta tinte/mod �tampanja (ukoliko je "
"dostupan) kao i hardverska konfiguracija za laserske �tampa�e (memorija, "
"duplex jedinica, dodatne kasete) pode�eni ispravno. Imajte na umu da pri "
"visokom kvalitetu �tampe/rezoluciji �tampe �tampanje mo�e biti zna�ajnije "
"usporeno."

#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Ova disketa nije formatirana sa FAT sistemom"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "Pode�avanje mre�e"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "Grafi�ka kartica"

#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "Prora�unavam granice Windows fajl-sistema"

#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "Kamerun"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "Provajderov dns 1 (opciono)"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Sada mo�ete particionirati va� %s hard disk ure�aj\n"
"Kada zavr�ite,ne zaboravite da potvrdite koriste�i `w'"

#: ../../keyboard.pm:1
#, c-format
msgid "Saami (swedish/finnish)"
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "Close"
msgstr "Zatvori"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
"\"Dr�ava\": proverava trenutni izbor zemlje. Ukoliko se ne nalazite u ovojs\n"
"dr�avi, kliknite na taster i i izaberite drugu."

#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
msgstr "Kalendar"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Obnovi izabrane\n"
"Unose u katalogu"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Da bi koristili udaljeni lpd �tampa�, morate da obezbedite ime hosta za "
"server za �tampanje kao i ime �tampa�a na tom serveru."

#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "Island"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "Pode�avanje mre�e"

#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper nedostaje"

#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "zaustavljeno"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Gde god FPU ima irq vektor"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "Pro�iri stablo"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Stari \"%s\" drajver je na crnoj listi.\n"
"\n"
"Prijavljeno je da opstrui�e kernel pri restartovanju.\n"
"\n"
"Novi \"%s\" drajver �e biti kori��en samo pri slede�em startanju sistema."

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Expert Mode"
msgstr "Ekspert mod"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "Opcije �tampa�a"

#: ../../standalone/drakgw:1
#, c-format
msgid "Local Network adress"
msgstr "Adresa Lokalne Mre�e"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Sa�uvajte svoje Sistemske fajlove ( /etc direktorijum )"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set the user umask."
msgstr ""
"Argumenti: (umask)\n"
"\n"
"Pode�avanje korisni�kog umask."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Sada imate mogu�nost da download-ujete a�urirane pakete koji su\n"
"kreirani nakon izlaska distribucije.\n"
"Oni mogu sadr�avati ispravke gre�aka i sigurnosnih rupa\n"
"\n"
"Da bi skinuli ove pakete morate da imate pode�enu Internet konekciju.\n"
"\n"
"da li �elite da instalirate update-ove ?"

#: ../../standalone/logdrake:1
#, c-format
msgid "Samba Server"
msgstr "Samba Server"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Australian Optus cable TV"
msgstr "Australijska Optus kablovska TV"

#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"<Tab>/<Alt-Tab> kret. izme�u elemenata | <Space> izbor | <F12> slede�i ekran"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet:"
msgstr "Subnet:"

#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabve"

#: ../../standalone/drakbackup:1
#, c-format
msgid "When"
msgstr "Kada"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Vama je potreban alcatel mikro mod.\n"
"MO�ete ga Download-ovati sa\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hour"
msgstr "�as"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Drugi DNS Server (opcija)"

#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "Finska"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "Broj boja: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Ne mo�ete deselektovati ovaj paket.On mora biti a�uriran"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "U�itavam sa diskete"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i prijavljivanje IPv4 strange paketa."

#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr "Slovenija"

#: ../../standalone/mousedrake:1
#, fuzzy, c-format
msgid "Mouse test"
msgstr "Mouse Systems"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm se koristi da videli fajlove u cilju pode�avanja dozvola, vlasnika "
"i grupa preko msec.\n"
"VI tako�e mo�ete da editujete svoja sopstvena pravila koja �e biti iznad "
"default pravila."

#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Unesi korisnika\n"
"%s"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- PCI i USB ure�aji : ovo prikazuje proizvo�a�a, ure�aj, podproizvo�a�a i "
"brojeve PCI/USB ure�aja"

#: ../../standalone/draksplash:1
#, c-format
msgid "ProgressBar color selection"
msgstr "Izbor boje za traku koja prikazuje stanje napredovanja"

#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Ovo su postavljne opcije.\n"
"Mo�ete dodati nove ili izmeniti stare."

#: ../../help.pm:1
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: ../../help.pm:1
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Pokre�e komande zakazane at komandom,kao i  batch  komande kao je "
"optere�enost\n"
"sistema mala."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr "Podr�ka za radio :"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing SANE packages..."
msgstr "Instaliram SANE pakete..."

#: ../../any.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "SILO"

#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "Promena tipa"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ", USB printer #%s"
msgstr ", USB �tampa� #%s"

#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "SILO instalacija"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"�estitamo, instalacija je zavr�ena.\n"
"Izvadite disketu iz drajva i pritisnite <Enter> da se ra�unar resetuje.\n"
"\n"
"\n"
"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
"Mandrake Linux Linux-a, pro�itajte deo 'Errata' koji mo�ete na�i na\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informacije o konfigurisanju va�eg sistema mo�ete na�i u post-instalacionom\n"
"poglavlju zvani�nog Mandrake Linux 'Vodi�a za korisnike'."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "paranoidni"

#: ../../security/l10n.pm:1
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Po�alji mail izve�taj nakon svakog backup/a na :"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Ova komanda vam je dostupna i u polju \"Konade za �tampanje\" dijaloga za "
"�tampanje u ve�ini aplikacija. Ali u tom slu�aju nemojte da upisujete ime "
"fajla jer je ono ve� dodeljeno od strane aplikacije.\n"

#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "Rezolucija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Da biste mogli da �tampate na SMB �tampa�u, treba da navedete\n"
"ime hosta (koje nije uvek isto kao TCP/IP ime ma�ine);\n"
"IP adresu �tampa�evog servera; deljeno ime �tampa�a kome pristupate,\n"
"kao i potrebna korisni�ka imena i lozinke."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogu�avanje su samo za korisnije wheel grupe ili za svakog korisnika."

#: ../../standalone/drakgw:1
#, c-format
msgid "reconfigure"
msgstr "ponovo podesi"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
"blokiranja ra�unara."

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "Pauza pri startanju kernela"

#: ../../standalone/logdrake:1
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd Servis"

#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "pristup mre�nim alatima"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"And, of course, push multimedia to its limits with the very latest software "
"to play videos, audio files and to handle your images or photos."
msgstr ""
"Mandrake Linux 9.2 vam omogu�ava da dovedete svoj multimedijalni ra�unar do "
"krajnih granica! Koriste�i najnoviji softver za slu�anje muzi�kih i audio "
"fajlova, editovanje i organizovanje va�ih slika i fotografija, gledanje TV-a "
"i videa, i jo� mnogo toga"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Ovde se nalazi lista auto-detektovanih �tampa�a. "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Gre�ka pri instalaciji aboot-a, \n"
"Da li da probam da instaliram �ak ako to vodi uni�tenju prve particije?"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Obnovi odabrane\n"
"fajlove"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s postoji, da ga obri�em?\n"
"\n"
"Upozorenje: Ukoliko ste ve� zavr�ili ovaj proces verovatno treba da\n"
"o�istite unos sa authorized_keys na serveru."

#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr "Molim VAS da popunite ili ozna�ite polja ispod"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Da li ho�ete da sa�uvate izmene u /etc/fstab?"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Boot Protocol"
msgstr "Startni(Boot) protokol"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskovi %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Paket %s je potreban. Da li �elite da ga instalirate?"

#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "Pri startanju"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus identification"
msgstr "Identifikacija busa"

#: ../../lang.pm:1
#, c-format
msgid "Vatican"
msgstr "Vatikan"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "Molim vas, prvo napravite kopiju va�ih podataka"

#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Imate vi�e od jednog hard diska, na koji od njih �elite da instalirate "
"Linux ?"

#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "Eritreja"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot ISO"
msgstr "Boot ISO"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Firmware needed"
msgstr "ukoliko je potrebno"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove List"
msgstr "Ukloni Listu"

#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid "A customizable environment"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr "Inuktitut"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr "Maroko"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "Koju model �tampa�a imate?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr "Dodajte novi �tampa�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "          All of your selected data have been          "
msgstr "          Svi va�i odabrani podasi su          "

#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Delete"
msgstr "<-- Obri�i"

#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "chunk veli�ina"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Ako je \\fIarg\\fP = ALL allow /etc/issue i /etc/issue.net ne postoji. Ako "
"je \\fIarg\\fP = NONE nijedana radnja nije\n"
"dozvoljena ili je samo /etc/issue dozvoljen."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Omogu�i/Onemogu�i sulogin(8) u single user nivou."

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
msgstr "Problemi pri instalaciji %s paketa"

#: ../../standalone/logdrake:1
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Oglasi�e se alarm ukoliko je u�itano ve�e od ove vrednosti"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add a scanner manually"
msgstr "Ru�no instalacija skenera"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Refresh"
msgstr "Osve�i"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "Ponovo u�itaj tabelu particija"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Da, ja �elim autologovanje sa ovim(korisnik,desktop)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Restore Selected"
msgstr ""
"Obnovi odabrane\n"
"fajlove"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search for fonts in installed list"
msgstr "Tra�i fontove u liti instaliranih"

#: ../../standalone/drakgw:1
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "Lokalna Mre�a nije zavr�ila sa`.0', bailing out."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Boot"
msgstr "Startanje"

#: ../../standalone/drakbackup:1
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr "Tip tjunera :"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"Sada treba da izaberemo sistem za �tampanje za va� ra�unar. Drugi OS-ovi "
"vam\n"
"nude jedan, ali vam Mandrake Linux nudi �ak tri.\n"
"\n"
" * \"pdq\" �to zna�i ``print, don't queue'', je izbor za one koji imaju\n"
"direktni konekciju sa svojim �tampa�em i �elite da izbegnete\n"
"bilo kakve zastoje �tampa�a, a pri tome nemate mre�ne �tampa�e. On mo�e da "
"se koristi\n"
"samo na veoma jednostavnim mre�ama i pomalo je i spor za mre�e. Izaberite "
"\"pdq\"\n"
"ukoliko upoznajete GNU/Linux. Va� izbor naravno mo�ete promeniti\n"
"nakon isntalacije pokre�u�i PrinterDrake from iz Mandrake Kontrolnog\n"
"Centra i klikom na expert taster.\n"
"\n"
" * \"%s\"``Common Unix Printing System'', je izvrstan za �tampanje na va�em\n"
"lokalonom �tampa�u kao i za �tampanje po celoj zemaljskoj kugli. On je "
"jednostavan i mo�e se pona�ati\n"
"kao server ili kao klijent sa starog \"lpd\" sitema za �tampanje. Tako�e, "
"on\n"
"je kompatibilan sa sistemima koji su ranije postojali. On mo�e mnogo toga, "
"ali\n"
"osnovno pode�vanje je jednostavno kao i kod \"pdq\". Ukoliko treba da "
"emulirate\n"
"an \"lpd\" server, morate da pokrenete \"cups-lpd\" demon. On poseduje\n"
"grafi�ki interfejs za �tapanje i izbor opcija za �tampanje.\n"
"\n"
"Ako to nij slu�aj, CUPS je onda prava stvar jer je jednostavniji i bolji za "
"rad preko\n"
"mre�a."

#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "\"Meni\" taster"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Proverite da li je Printerdrake auto-detektovao va� �tampa� korektno. "
"Potra�ite pravi model na listi kada kursor stoji na pogre�no izabranom "
"modelu ili na \"Raw �tampa�\"."

#: ../../standalone/draksec:1
#, c-format
msgid "Security Administrator:"
msgstr "Administrator za sigurnost:"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
"Argumenti: (val)\n"
"\n"
"Podesite shell pauzu. Vrednost zero - nula zna�i da nema pauze."

#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"ukoliko je pode�eno na da, proverite ovla��enja za fajlove u korisni�kom "
"home diretorijumu."

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have an Internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Vi nemate ni jednu pode�enu Internet konekciju.\n"
"Kreirajte je klikom na 'Configure'"

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
msgstr "Kopija fonta"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "Automatski"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Da li ho�ete da testirate konfiguraciju?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""
"�tampa� \"%s\" je uspe�no uklonjen iz Star Office/OpenOffice.org/GIMP-a"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "Sa�uvaj selekciju paketa"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Actions"
msgstr "/_Akcije"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Remove the last item"
msgstr "Ukloni zadnju vrednost"

#: ../../standalone/drakbackup:1
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su va�ni)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No net boot images created!"
msgstr "Nema kreiranih No net boot image!"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "koristi pptp"

#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Izaberite koje servisi treba automatski da se pokrenu pri startanju"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check files/directories writable by everybody"
msgstr ""
"ukoliko je pode�eno na da, ozna�ite fajlove/diretorijume upisivim za sve "
"korisnike."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Learn how to use this printer"
msgstr "Nau�ite kako da koristite ovaj �tampa�"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "Podesi mre�u sada"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Izaberite mirror sa kog �ete skinuti pakete"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Program za promenu veli�ine FAT paritcija ne mo�e da upravlja va�om "
"particijom, \n"
"zbog slede�e gre�ke: %s"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "Size: "
msgstr "Veli�ina: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Gde �elite da instalirate starter?"

#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "Bahami"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "Da li �elite da kliknete na ovaj taster? "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "Ru�na konfiguracija"

#: ../../standalone/logdrake:1
#, c-format
msgid "search"
msgstr "tra�i"

#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Ovaj paket aktivira odabranu mapu tastature kako je pode�eno \n"
"u  /etc/sysconfig/keyboard.Ovo se pode�ava koriste�i kbdconfig alatku.\n"
"Treba da bude uklju�en na ve�inu ma�ina."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (Instalacija displej drajver)"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zeroconf ime doma�ina (host name) ne sme da sadr�i a."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij icmp echo."

#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog je objekat pomo�u kog mnogi demoni koriste za logovanje poruka\n"
"u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog."

#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Unknown/Others"
msgstr "Nepoznati/Ostali"

#: ../../standalone/drakxtv:1
#, c-format
msgid "No TV Card detected!"
msgstr "TV kartica nije detektovana!"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Options"
msgstr "Opcije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "�tampa�  \"%s\" je sada postavljen kao default �tampa�."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Treba da podesite  OKI laserski win �tampa�. Ovi �tampa�i\n"
"koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade "
"samo kada su povezani na prvi paralelni port. Kada je va� �tampa� povezan na "
"drugi port ili na server pove�ite �tampa� na prvi paralelni port pre nego "
"i�tampate test stranicu ili va� �tampa� ne�e raditi. Postavke za va� tip "
"konekcije �e biti ignorisane od strane drajvera."

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "Generacija procesora (npr.: 8 za PentiumIII, ...)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detected"
msgstr "Auto-detekcija"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Va� ra�unar mo�ete podesiti da instalira PXE server kao DHCP server.\n"
"kao i TFTP sever da bi kreirao instalacioni server.\n"
"Sa ovom opcijom, drugi kompjuteri na va�oj lokalnoj mre�i �e mo�i da koriste "
"instalaciju sa ovog ra�unara.\n"
"\n"
"Proverite da li je pode�ena va�a Mre�ni/Internet pristup preko drakconnect "
"pre nego �to nastavimo.\n"
"\n"
"Napomena: potrebana vam je mre�na kartica da bi podesili lokalnu mre�u(LAN)."

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Otvoreni Sistem za Zvuk)je bio prvu zvu�ni API. On je nezavisan zvu�ni "
"API u odnosu na operativni sistem(dostupan je na ve�ini unices sistema) ali "
"je prili�no rudimenaran i ograni�en API.\n"
"�ak �ta vi�e, ve�ina drajvera kao da ponovo otkirva to�ak \n"
"\n"
"ALSA (Advanced Linux Sound Architecture) je modularne arhitekture koji\n"
"podr�ava veliki broj ISA, USB i PCI kartica.\n"
"\n"
"On tako�e obezbe�uje mnogo ve�i API u odnosu na  OSS.\n"
"\n"
"Da bi koristili alsa, mo�ete koristi ili:\n"
"- stari kompatibilni OSS api\n"
"- novi ALSA api koji omogu�ava mnogo napredne mogu�nosti ali zahteva "
"kori��enje ALSA biblioteke.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Nema slobodnog prostora za 1MB bootstrap! Instalacija �e se nastaviti, ali "
"da bi podigli va�sistem, mora�ete da kreirate bootstrap particiju u "
"DiskDrake-u"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Izaberite �tampa� koji �elite da podesite unesite ime/ime fajla ure�aja u "
"liniju za unos"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "Odbaci"

#: ../../standalone/draksec:1
#, c-format
msgid "LOCAL"
msgstr ""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS"

#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake starta ispitivanje haredvera, i po potrebi �e podesiti \n"
"novi/izmenjeni hardver."

#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "Kreiranje i formatiranje datoteke %s"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "ukoliko je pode�eno na da, ozna�ite dodavanje/uklanjanje sgid fajlova."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Izaberi postoje�i LVM za dodavanje"

#: ../../standalone/drakfont:1
#, c-format
msgid "xfs restart"
msgstr "Restart xfs"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"�tampa� \"%s\" ve� postoji,\n"
"da li stvarno �elite da ponovo upi�ete njegove opcije?"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Koristi skenere na hostovima: "

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselected All"
msgstr "Deselektuj Sve"

#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
#, c-format
msgid "No partition available"
msgstr "nema dostupnih particija"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Printer Management \n"
msgstr "Upravljanje korisnicima \n"

#: ../../standalone/logdrake:1
#, c-format
msgid "Domain Name Resolver"
msgstr "Program za definisanje Imena domena"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "Klju� za enkripciju (ponovo)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr "Nedostaje deljeno ime za Samba-u!"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type install done"
msgstr "Instalacija True Type fontova zavr�ena"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
msgstr "Detekcija u toku"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Kompajliraj celi Kernel -->"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "modem"
msgstr "Modem"

#: ../../lang.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "Dobro�li u  %s"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Ubacite Update Modules disketu u ure�aj %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
msgstr "Bootsplash"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Slede�i �tama�\n"
"\n"
"%s%s\n"
"je direktno povezan na va� sistem"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Zajedni�ko deljenje �tampa�a na doma�inima(hosts)/mre�ama: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"Komanda \"%s\" tako�e dozvoljava izmenu opcija za konkretni posao �tampanja. "
"Jednostavno dodajte �eljene ocije u komandnu liniju, e. g. \"%s <fajl>\". "

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"U nekim slu�ajevima, drajver %s zahteva dodatne informacije\n"
"za pravilan rad, mada mo�e lepo da radi i bez njih. Da li ho�ete\n"
"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
"Mogu�e je da �e proba zaglaviti va� ra�unar, ali ne�e naneti nikakvu �tetu."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "NIje ipstavna oznaka CDa. Disk je ozna�en sa %s."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Demonn (%s) uklju�uje :\n"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Dobrodo�li u alat za pode�avanje Deljenja Internet konekcije\n"
"%s\n"
"\n"
"Kliknite na Podesi (Configure) da bi pokrenuli pode�avanje."

#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "Kuba"

#: ../../standalone/drakbackup:1
#, c-format
msgid "October"
msgstr "Oktobar"

#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "Belize"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Searching for new printers..."
msgstr "Tra�im nove �tampa�e..."

#: ../../standalone/drakbackup:1
#, c-format
msgid " (multi-session)"
msgstr " (multi-sesija)"

#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Pauza pri startanju kernela"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid " Activate/Disable daily security check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Aktiviraj/Deaktiviraj dnevne sigurnosne provere."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i libsafe ako je libsafe prona�en na sistemu."

#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX �arobnjak za particioniranje je prona�ao slede�a re�enja:"

#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "Ma�arski"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Izaberite svog provajdera.\n"
" Ukoliko nije na listi, izaberite Unlisted"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatska sinhronizacija vremena (preko NTP-a)"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "Prora�unavam granice Windows fajl-sistema"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: ../../any.pm:1
#, c-format
msgid "LDAP Server"
msgstr "LDAP Server"

#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA podr�ka  se obi�no koristi za  eternet i modeme u laptopovima.\n"
"Ne�e se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
"na sistemu kom nije potreban."

#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "Izaberi svoju zemlju"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Sistemski fajlovi:\n"

#: ../../standalone/drakbug:1
#, c-format
msgid "Standalone Tools"
msgstr "Samostalni Alati"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Where"
msgstr "Gde"

#: ../../standalone/logdrake:1
#, c-format
msgid "but not matching"
msgstr "ali ne poklapa se"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Ovde mo�ete izabrati alternativni drajver (ili OSS ili ALSA) za svoju zvu�nu "
"karticu (%s)."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Konfiguri�em PCMCIA kartice..."

#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "nedostaje kdesu"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "Klju� za enkripciju"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "Uskr�nja ostrava"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Instalacija startera neuspela. Gre�ka je:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI kanal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr "Podesi ovaj �tampa� kao default"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "Da li je ovo ispravno pode�eno?"

#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "particija %s "

#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "Paranoidna"

#: ../../any.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Del User"
msgstr "<-- Obri�i Korisnika"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Location on the bus"
msgstr "Lokacija na busu"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No printer found!"
msgstr "Nije prona�en �tampa�!"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the device"
msgstr "Ime prizov�a�a ure�aja"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "Izbri�i celi disk"

#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (Podrazumevano)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
msgstr "Automatska rekonfiguracija"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Receiving Speed:"
msgstr "Brzina pri pprijemu:"

#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks and Caicos Islands"

#: ../../standalone/drakconnect:1
#, c-format
msgid "No Ip"
msgstr ""

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "<- Previous"
msgstr "<- Prethodni"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
"  Prebaci  \n"
"Sada"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Set root password and network authentication methods"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing configuration"
msgstr "Konfiguracija Deljenja Internet konekcije"

#: ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Birajte: ravno ili grupno sortirano"

#: ../../standalone/drakboot:1
#, c-format
msgid "Themes"
msgstr "Teme"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "Opcije: %s"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Trenutno koristite %s kao Boot menad�er \n"
"Kliknite na Podesi (Configure) da bi pokrenuli pode�avavanje."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI win �tampa� konfiguracija"

#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr "Sveta Jelena"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr " na parelelnom portu #%s"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Security Level"
msgstr "Nivo sigurnosti"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Neki koraci nisu kompletirani.\n"
"\n"
"Da li stvarno �elite da zavr�ite ?"

#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Poljski (qwertz raspored)"

#: ../../lang.pm:1
#, c-format
msgid "Syria"
msgstr "Sirija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"Da li je va� ure�aj vi�e-funkcionalni ure�aj proidzvo�a�a HP ili Sony "
"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 sa skenereom, DeskJet "
"450, Sony IJP-V100),  HP PhotoSmart ili HP LaserJet 2200?"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n"
"\n"
"Izaberite operativni sistem, ili\n"
"sacekate %d sekundi za startanje pretpostavljenog OS.\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "Portugalski"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "Ime Loopback datoteke: "

#: ../../network/network.pm:1
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "DNS adresa treba da bude u formatu 1.2.3.4"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Left Control key"
msgstr "Udaljena kontrola"

#: ../../lang.pm:1
#, c-format
msgid "Serbia"
msgstr "Srbija"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Newzealand"
msgstr "Novi Zeland"

#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Ovaj direktorijum treba da ostane u root-u  datote�nog sistema"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Across Network"
msgstr "preko Mre�e"

#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "CapsLock taster"

#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "Instaliraj starter"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Koli�ina memorije na grafi�koj kartici"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i crontab i at za korisnike. Postavite korisnike sa "
"dozvolama u /etc/cron.allow i /etc/at.allow\n"
"(pro�itajte man at(1) i crontab(1))."

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[OPTIONS]\n"
"Mre�na i Internet konekcija i aplikacije za monitoring\n"
"\n"
"--defaultintf interfejs : prikazuje  ovaj interfejst po osnovnoj postavci\n"
"--connect : povezuje se na Internet ukoliko ve� nije povezan\n"
"--disconnect : prekida vezu sa Internetom ukoliko je ve� povezan\n"
"--force : koristi se uz dve prethodne opcije : primorava na povezivanje ili "
"prekid.\n"
"--status : prikadzuje 1 ukoliko je povezan ili 0 ako nije, i zatim "
"zavr�ava.\n"
"--quiet : bez interaktivnosti. Treba da se koristi sa opcijama za "
"povezivanje i prekid."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "Dinami�ka IP adresa Pool:"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "LVM ime?"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Neki ure�aji u \"%s\" klasi hardvera su uklonjeni:\n"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "Prona�eno  %s %s interfejsa"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Install"
msgstr "Post-instalacija"

#: ../../standalone/drakgw:1
#, c-format
msgid "The internal domain name"
msgstr "Interno ime domena"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "IRQ kartice"

#: ../../standalone/logdrake:1
#, c-format
msgid "logdrake"
msgstr "logdrake"

#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"Program za kontrolu i importovanje "
"fontova                                     \n"
"--windows_import : importuje sa svih dostupnih windows particija.\n"
"--xls_fonts      : prikazuje sve fontove koji su ve� prisutni preko xls\n"
"--strong         : strga provera fonta.\n"
"--install        : instalira bilo koji font i bilo koji direktorijum.\n"
"--uninstall      : deinstalira  bilo koji font ili bilo koji direktorijum sa "
"fontovima.\n"
"--replace        : zamenjuje sve fontove koji ve� postoje\n"
"--application    : 0 bez aplikacije.\n"
"                 : 1 sve dostupne aplikacije podr�ane.\n"
"                 : name_of_application kao za na primer staroffice \n"
"                 : i  gs za ghostscript za samo ovu."

#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
"Izabrerite disketni ure�aj koji �ete koristiti  za kreiranje starne diskete"

#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "LILO sa tekstualnim menijem"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr "Sve (bez firewall-a)"

#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "Morate specificirati kernelov image"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on USB"
msgstr ", multi-funkcionalni ure�aj na USB"

#: ../../interactive/newt.pm:1
#, c-format
msgid "Do"
msgstr "Uradi"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Kantaktirajte mirror za listu mogu�ih paketa"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Litvanski AZERTY(stari)"

#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brazilski (ABNT-2)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr "IP adresa hosta/mre�e:"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"y koorinata trake sa prikazom napretka\n"
"od svog gorenjeg levog ugla"

#: ../../install_gtk.pm:1
#, c-format
msgid "System installation"
msgstr "Instalacija sistema"

#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Sveti Vinsent i Grenandini"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli restartovanje od strane konzlolnog korisnika."

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Open"
msgstr "/Datoteka/_Otvori"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Lokacija auto_install.cfg fajla"

#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "Otpo�ni Firmware pauzu"

#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "Ma�arska"

#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr "NOvi Zeland"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Color configuration"
msgstr "Pode�avanje boje"

#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Ve� postoje neka ograni�enja, a vi�e automatskih provera se pokre�e svake "
"no�i."

#: ../../standalone/drakbackup:1
#, c-format
msgid "please choose the date to restore"
msgstr "izaberite datum za obnavljanje"

#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr "Holandski Antili"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Menjam ext2 na ext3"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Browse to new restore repository."
msgstr "Pretra�ite novi restore repository."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Dobrodo�li u �arobnjak za konfigurisanje �tampa�a\n"
"\n"
"Ovaj �arobnjak �e vam omogu�iti da instalirate lokalne ili udaljene �tampa�e "
"sa ovema�ine kao i drugih ma�ina na mre�i.\n"
"\n"
"Od vas �e biti tra�ene sve neophodne informacije za pode�avanje �tampa�a a "
"dobi�ete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima "
"konekcije �tampa�a."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and %d unknown printers"
msgstr "i %d nepoznati �tampa�i"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Rani Intel Pentium �ipovi su imali gre�ku u floating ta�ki procesora koji "
"nije uspevao da postigne zahtevanu preciznost pri izvo�enju Floating point "
"DIVision (FDIV)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Nije prona�ena ISDN PCI kartica.Izaberite jednu na slede�em ekranu."

#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "GB"

#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "Odredite korisni�ko ime"

#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "Omogu�i startanje sa CD-a?"

#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr " unesite `void' za void unos"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "January"
msgstr "Januar"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Password history length"
msgstr "Ova lozinka je previ�e prosta"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Winmodem connection"
msgstr "Winmodem konekcija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"�estitamo, ba� �tampa� je sada instaliran i pode�en!\n"
"\n"
"Mo�ete da �tampate koriste�i \"�tampaj\" komandu u va�oj aplikaciji (obi�no "
"u \"Fajl\" meniju).\n"
"\n"
"Ukoliko �elite da dodate, uklonite ili promenite ime �tampa�u, ili �elite da "
"promenite default opcije (papir, kvalitet �tampanja, ...), izaberite "
"\"�tampa�\" u \"Hardver\" sekciji Mandrake Kontrolnog Centra."

#: ../../standalone/drakxtv:1
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Sada mo�ete pokrenuti xawtv (pod X Window okru�enjem!) !\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nema dovoljno swap-a da zavr�i instalaciju, dodajte jo� swap-a"

#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "%s on %s"
msgstr "%s (Port %s)"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli udaljeno root logovanje."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same timezone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can used by\n"
"other machines on your local network as well."
msgstr ""
"GNU/Linux upravlja sa vremenom u GMT (Greenwich Mean Time) i prevodi ga u\n"
"lokalno vreme u zavisnosti koju ste vremensku zonu izabrali. Me�uti, mogu�e "
"je\n"
"ovo i deaktivirati deselektovanjem \"Podesi hardverski �asovnik na GMT\" "
"tako da hardverski �asovnik\n"
"haima isto vreme kao i sistemski �asovnik. Ovo je korisno kada na ma�ini "
"imate\n"
"jo� jedan operativni sistem kao �to je Windows.\n"
"\n"
"Opcija \"Automatska sihronizacija �asovnika\" �e automatski regulisati\n"
"�asovnik konektovanjem na udaljeni vremenski server na Internetu. Na \n"
"listi koja je prikazana, izaberite server koji se nalazi blizu vas. "
"Naravno,\n"
"morate imati ispravno pode�enu Internet konekciju da bi mogli da koristite "
"ovu opciju. Ona �e\n"
"ustvari instalirati na va�u ma�inu vremenski server koji se pomogu�nosti "
"mo�e koristiti i od\n"
"strane drugih ma�ina na va�oj lokalnoj mre�i."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
msgstr "Koja je va�a vremenska zona ?"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Can't create log file!"
msgstr "Ne mogu da kreiram katalog!"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "Koristi quota zar backup fajlove"

#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "Gvineja"

#: ../../network/tools.pm:1
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Sistem je trenutno konektovan na Internet."

#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Ju�na D�ord�ija i Ju�na Sendvi�ka Ostrva"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (broadcast)"
msgstr "Japan (broadcast)"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""
"Monitor\n"
"\n"
"   Program za instalaciju obi�no automatski detektuje i pode�ava\n"
"monitor povezan na va�u ma�inu. Ukoliko se to nedesi, mo�ete sami\n"
"sami da izaberete model monitora sa liste."

#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr "Mozambik"

#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "Ikona"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose what you want to backup"
msgstr "Izaberite �ta �elite da backup-ujete"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 boja (8-bitna paleta)"

#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "�itanje-pisanje RW"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "Veli�ina: %s\n"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Hostname: "
msgstr "Ime hosta:"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Add a rule"
msgstr "Dodajte pravilo"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "Chunk-uj %s\n"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Build the future of Linux!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "Lokalni �tampa�"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Gde biste da montirate %s ure�aj ?"

#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "ADSL konekcija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Bez konfiguracije, kliknite na �arobnjak ili Napredno\n"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Error!"
msgstr "Gre�ka!"

#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "Detektovana je kablovska konekcija "

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Odbijen pristup pri transferu %s na %s"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_Report Bug"
msgstr "/_Prijavite Bag"

#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "Dominikana"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "Promeni veli�inu"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezolucija: %s\n"

#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Ne mogu da pristupim kernel modulima koji odgovaraju va�em kernelu (fajl %s "
"nmedostaje), �to generalno zna�i da va� boot floppy nije sinhronizaovan sa "
"Instalacionim medijom (kreirajte noviji boot floppy)"

#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Molim, izaberite odgovaraju�i port. Na primer, COM1 port pod MS Windows-om\n"
" u Linux-u ima oznaku ttyS0."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "Slede�i paketi �e biti izbrisani"

#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "Konektuj na internet"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "Koristi postoje�u particiju"

#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "Kanadski (Kvebek)"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "Mi� je postavljen na ure�aj: %s\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Reselect correct fonts"
msgstr "Ponovo selektuj ispravne fontove"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"Na kraju, bi�ete upitani da li �elite grafi�ki interfejs\n"
"pri startanju sistema. Ovo pitanje �e vam biti postavnjeno �ak i ako niste "
"testirali\n"
"konfiguraciju. Naravno, odgovori�ete \"Ne\" ukoliko va�a ma�ina predstalja\n"
"server, ili ukoliko niste uspe�no podesili\n"
"displejed."

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "MandrakeExpert Corporate"
msgstr "MandrakeExpert Corporate"

#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Write protection"
msgstr "Auto-detekcija �tampa�a"

#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid "You've not selected any font"
msgstr "ne mogu da prona�en nijedan font.\n"

#: ../../steps.pm:1
#, c-format
msgid "Language"
msgstr "Izaberite jezik"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "Selekcija modela �tampa�a"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Posle promene tipa particije %s, svi podaci na ovoj particiji �e biti "
"izbrisani"

#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr "%d sekundi"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Ubacite praznu disketu u ure�aj %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr "Morate uneti validan URI!"

#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "Prona�en je \"%s\" interfejs, da li �eli te da ga koristite ?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Rekonfiguri�i interfejs i DHCP server"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "Pode�avanje zvuka"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "Foto test stranica"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "Custom disk particioniranje"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Unesite ime �tampa�a i Komentare"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Slede�i �tama�i\n"
"\n"
"%s%s\n"
"su direktno povezani na va� sistem"

#: ../../network/modem.pm:1
#, c-format
msgid "You don't have any winmodem"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: %s"
msgstr "tip: %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slova�ki (QWERTY)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This should be a comma-separated list of local users or email addresses that "
"you want the backup results sent to. You will need a functioning mail "
"transfer agent setup on your system."
msgstr ""

#: ../../standalone/draksound:1
#, c-format
msgid "No Sound Card detected!"
msgstr "Zvu�na kartica nije detektovana!"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "Port za mi�a"

#: ../../security/l10n.pm:1
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Morate da restartujete Menad�era za Dispej da bi sve izmene bile vidljive. \n"
"(service dm restart - u kondzoli)"

#: ../../standalone/logdrake:1
#, c-format
msgid "Ftp Server"
msgstr "Ftp Server"

#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid "%s fonts conversion"
msgstr "Konverzija pfm fontova"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "Tip busa na koji je va� mi� priklju�en."

#: ../../help.pm:1
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change that if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you want to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "Komori"

#: ../../standalone/drakbackup:1
#, c-format
msgid "May"
msgstr "Maj"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yaboot mode"
msgstr "Yaboot mod"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Generi�ki 3 tastera mi�"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
msgstr "SAD (kabl)"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"Ne mogu da restartujem LiLo!\n"
"Pokrenite \"lilo\" kao root iz komandne linije da bi zavr�ili instalciju "
"teme za LiLo starter."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
msgstr "Izaberitedrugi medij za obnavljanje sa"

#: ../../standalone/drakbug:1
#, c-format
msgid "Software Manager"
msgstr "Menad�er Softvera"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "Re-submit"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD in place - continue."
msgstr "CD na mestu - nastavi."

#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "KB"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Network & Internet"
msgstr "Mre�a i Internet"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litvanski \"fonetski\" QWERTY"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
msgstr "Net Boot Images"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Sharing of local scanners"
msgstr "Zajedni�ko deljenje lokalnih skenera"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play testiranje nije uspelo. Izaberite ta�an model monitora"

#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "Servisi i demoni"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "Nedostaje ime udaljenog host-a!"

#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "sa /usr"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "Mre�a"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Auto-detekcija �tampa�a konektovanih na ma�ine na kojima je instaliran "
"Microsoft Windows"

#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "Ova lozinka je previ�e prosta"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "Podesi servise"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slova�ki (QWERTZ)"

#: ../../share/advertising/06-development.pl:1
#, c-format
msgid ""
"To modify and to create in different languages such as Perl, Python, C and C+"
"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
"development environments."
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "No devices found"
msgstr "NIje prona�en image"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use daemon"
msgstr "Koristi demon"

#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1
#: ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "Autentifikacija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Dodaj ovaj �tampa� u Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Additional CUPS servers: "
msgstr "Dodatni CUPS serveri: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Izaberite jedan od auto-detektovanih �tampa�a sa liste i unesite ime hosta "
"ili IP i opcionalni broj porta (default je 9100) u polje za unos."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Gde biste da montirate %s ure�aj ?"

#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "Al�ir"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network"
msgstr "Obnovi preko Mre�e"

#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "Initrd-veli�ina"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"U slu�aju da su dostupni razli�iti serveri za va�u karticu, sa ili\n"
"bez 3D akceleracije, najbolje je da izaberete server koji\n"
"najvi�e odgovara va�im potrebama."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tBackus koristi tar i gzip\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Set as default"
msgstr "default"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: ../../printer/main.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "(na ovoj ma�ini)"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Both Control keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: ../../standalone/drakhelp:1
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[OPTION]...\n"
"  --no-confirmation      ne postavlja pitanje o potvrdi u MandrakeUpdate "
"modu\n"
"  --no-verify-rpm        ne proverava signature paketa\n"
"  --changelog-first      prikadzuje zapis o izmenama pre liste fajlova u "
"prozoru dza opis\n"
"  --merge-all-rpmnew     predla�e spajanje svih prona�enih .rpmnew/.rpmsave "
"fajlova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Setting Default Printer..."
msgstr "Pode�avanje Default �tampa�a..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interfejs %s (koriste�i modul %s)"

#: ../../standalone/draksplash:1
#, c-format
msgid "Generating preview ..."
msgstr "Generi�em pregled..."

#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Frekvencija treba da ima predznak k, M ili G (na primer, \"2.46G\" za 2.46 "
"GHz frekvenciju), ili dodajte dovoljno '0'(nula)."

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid "ignore"
msgstr "Singapur"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Argumenti: (arg, listen_tcp=None)\n"
"\n"
"Dozvoljava/Nedozvoljava X konekciju. Prvi argument odre�ije �ta je ura�eno\n"
"sa strane klijenta: ALL (sve konekcije su dozvoljene), LOCAL (samo\n"
"lpkalne konekcije) i NONE (bez konekcije)."

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", multi-funkcionalni ure�aj na paralelnom portu #%s"

#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "serijski"

#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Gruzijski (\"Latini�ni\" rapored)"

#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Sada mo�ete da ubacite njegove opcije u modul %s.\n"
"Zapamtite da svaka adresa treba da se unosi sa prefiksom 0x kao npr. '0x123'"

#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "Kenija"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Prvo uradite ``Demontiraj''"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing mtools packages..."
msgstr "Instaliram mtools pakete..."

#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "Morate odrediti root particiju"

#: ../../standalone/draksplash:1
#, c-format
msgid "first step creation"
msgstr "kreiranje prvog koraka"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Oba Shift tastera istovremeno"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Select a scanner model"
msgstr "Izaberite model skenera"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Prihvati/Odbij IPv4 poruke o gre�kama."

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR Nove Generacije"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup Configuration"
msgstr "Drakbackup Konfiguracija"

#: ../../standalone/logdrake:1
#, c-format
msgid "Save as.."
msgstr "Snimi Kao..."

#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr "Koreja (Severna)"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""
"Ovaj interfejs jo� uvek nije pode�en.\n"
"Pokrenite konfiguracionog �arobnjaka u glavnom prozoru"

#: ../../install_gtk.pm:1
#, c-format
msgid "System configuration"
msgstr "Konfiguracija sistema"

#: ../../any.pm:1 ../../security/l10n.pm:1
#, c-format
msgid "Autologin"
msgstr "Auto logovanje"

#: ../../any.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "Admin Lozinka domena"

#: ../../share/advertising/05-desktop.pl:1
#, fuzzy, c-format
msgid ""
"Perfectly adapt your computer to your needs thanks to the 11 available "
"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
"2.2, Window Maker, ..."
msgstr ""
"Mandrake Linux 9.2 vam donosi 11 razli�itih grfi�kih desktop okru�enja i "
"window menad�era pa tako mo�ete izabrati izme�u  GNOME 2, KDE 3, Window "
"Maker..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer ..."
msgstr "Pode�avanje �tampa�a ..."

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Da bi osigurali integritet nakon promene veli�ine particije(a), \n"
"provera fajl sistema �e biti pokrenuta kada se slede�i put ulogujete u "
"Windows(TM)"

#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "MB"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "ukoliko je pode�eno na da, pokrenite proveru rpm baze podataka."

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr "Devi�anska Ostrva(V.Britanija)"

#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: ../../standalone/drakfont:1
#, c-format
msgid "click here if you are sure."
msgstr "kliknite ovde ukoliko ste sigurni."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Nije prona�en kofiguracioni fajl \n"
"Kliknite na �arobnjak ili Napredno."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Iznad se nalazi lista postoje�ih Linux particija koje su detektovane\n"
"na hard disku. Mo�ete zadr�ati izbor koji je napravio �arobnjak, jer je "
"dobar za a\n"
"op�tu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
"particiju (\"/\"). Nemojte da birate suvi�e malu particiju jer ne�ete mo�i "
"da\n"
"instalirate ovoljno softvera. Ukoliko �elite da podatke staviljate na "
"posebnu particiju ,\n"
"morate da izaberete i \"/home\" (mogu�e je ukoliko imate vi�e od jedne\n"
"Linux particije).\n"
"\n"
"\n"
"Informacija: svaka particija je prikazana na slede�i na�in: \"Ime\", "
"\"Kapacitet\".\n"
"\n"
"\"Ime\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj hard diska"
"\",\n"
"\"proj particije\" (na primer, \"hda1\").\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE ure�aj i  \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Za IDE hard "
"diskove:\n"
"\n"
"   * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
"   * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
"   * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
"   * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"\n"
"Sa SCSI hard diskovima, a \"a\" zna�i \"primarni hard disk\", a \"b\" "
"zna�i \n"
"\"sekundarni hard disk \", itd..."

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
msgstr "Ukloni"

#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "Lesoto"

#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr "utopia 25"

#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "Ubaci naredbu u komandu"

#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "Obala slonova�e"

#: ../../standalone/harddrake2:1
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "novo dinami�ko ime ure�aja generisano od strane core kernel devfs"

#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Yes"
msgstr "Da"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Koji protokol �elite da koristite ?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Progress"
msgstr "Obnovi stanje napredovanja"

#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "Estonija"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "Izaberite hosta na kojem bi lokalni �tampa�i trebali biti dostupni:"

#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Imate prazninu u va�oj tabeli particija ali je ne mogu korisiti.\n"
"Jedino re�enje je da pomerite primarnu particiju tako da praznina bude\n"
"do extended particija"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Channel"
msgstr "Kanal"

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "Dodaj"

#: ../../standalone/drakgw:1
#, c-format
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Do sada Deljenje internet konekcije nije pode�avano."

#: ../../standalone/drakbackup:1
#, c-format
msgid " Error while sending mail. \n"
msgstr " Gre�ka tokom slanja mail-a. \n"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "Tastatura"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Ubacite CD sa oznakom  %s\n"
" u CD ure�aj sa ta�kom montiranja /mnt/cdrom"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Raspon treba da ima predznak k, M ili G (na primer, \"11M\" za 11M), ili "
"dodajte dovoljno '0' (nula)."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Izaberite tip konekcije koji �elite da koristite"

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security level..."
msgstr "Samo momenat, pode�avam nivo sigurnosti..."

#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "Pode�avanje mre�nog ure�aja %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "activated"
msgstr "Aktivirano"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "Izaberite mre�ni interfejs koji �elite da koristite za dhcp server."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Tra�im pakete za a�uriranje..."

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "Ta�ka montiranja: "

#: ../../standalone/drakfont:1
#, c-format
msgid "parse all fonts"
msgstr "parsiraj sve fontove"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli diektno root logovanje."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""
"Argumenti: (arg)\n"
"\n"
" Prihvati/Odbij prenosivi icmp echo."

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "Sa X-ovima"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head konfiguracija"

#: ../../standalone/drakbug:1
#, c-format
msgid "No browser available! Please install one"
msgstr "Nema dostupnog pretra�iva�a! Molim Vas da instalirate barem jednog"

#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Sa�uvaj promene?\n"
"Trenutna konfiguracija je:\n"
"\n"
"%s"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Ne mo�ete koristiti ReiserFS za particije manje od 32MB"

#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (sli�no finger-u)."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "Ime domena"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Sharing of local printers"
msgstr "Deljenje lokalnih �tampa�a"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Omogu�i/Onemogu�i libsafe ako je libsafe prona�en na sistemu."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Available printers"
msgstr "Dostupni �tampa�i"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "NO"
msgstr "INFO"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "Prazno"

#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
msgstr "�irina teksta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Gde biste da montirate %s ure�aj ?"

#: ../../standalone/drakgw:1
#, c-format
msgid "The default lease (in seconds)"
msgstr "default pu�tanje (u sekundama)"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"\n"
"\n"
"Sada treba da podesimo %s konekciju.\n"
"\n"
"\n"
"Pritisnite \"U redu\" za nastavak."

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
msgstr "Interfejs \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Sa osnovnom dokumentacijom (preporuka!)"

#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "1 taster"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"Prisutno je %d nepoznatih �tampa�a povezanih na va� sistem"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "Test"

#: ../../lang.pm:1
#, c-format
msgid "Korea"
msgstr "Koreja"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Va� izbor? (default `%s'%s) "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "Raw �tampa�"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "official vendor name of the cpu"
msgstr "Zvani�no ime proizvo�a�a za procesor"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "Proizvo�a�"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s"
msgstr "Interfejs %s"

#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "Pode�avanje mi�a"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "Izaberite ta�ke montiranja"

#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1
#, c-format
msgid "OK"
msgstr "OK"

#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Srpski (latinica)"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "Instaliram"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "Pokreni userdrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Da li je ovo instalacija ili a�uriranje?"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Interna  ISDN kartica"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux software, join our "
"discussion forums on our \"Community\" webpages."
msgstr ""
"Da bi podelili va�e znanje i pomogli u razvoju Linux alata, pridru�ite se "
"diskusionim forumima koje mo�ete prona�i na na�im \"Community\" veb "
"stranicama"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Hard disk.\n"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
"Ovaj korak se aktivira samo u slu�aju da postoji stara GNU/Linux particija "
"na\n"
"va�ioj mo�ini.\n"
"\n"
"DrakX sada treba da zna da li �elite da izvedete �istu instalaciju ili "
"a�uriranje\n"
"postoje�eg Mandrake Linux sistema:\n"
"\n"
" * \"Instalacija\": U ve�ini slu�ajeva, ova opcija kompletno bri�e stari\n"
"sistem. Ukoliko �elite da izmenite broj particija, ili\n"
"promenite fajl sistem, trebali bi da koristite ovu opciju. Ipak,  u "
"zavisnosti od\n"
"�eme particija, mo�ete za�tititi neke postoje�e podatke\n"
"od formatiranja.\n"
"\n"
" * \"A�uriranje\": ova instalaciona klasa vam dozvoljava da uradite "
"a�uriranje paketa\n"
"na trenutno instaliranom Mandrake Linux sistemu. Va�a trenutna\n"
"�ema particija i korisni�ki podaci se ne menjaju. Ve�ina drugih\n"
"konfiguracionih koraka i dalje ostaje dostupna, sli�no standardnoj "
"instalaciji.\n"
"\n"
"Upotreba opcije ``A�uriranje'' bi trebalo da bude bez problema na Mandrake "
"Linux sistemima\n"
"od verzije \"8.1\" ili novije. Izvo�enje a�uriranja na verzijama \n"
"Mandrake Linux pre \"8.1\" nije preporu�ljivo."

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "�tampa� ili Udaljeni CUPS server"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
"Neospeo poku�aj uklanjanja �tampa�a \"%s\" iz Star Office/OpenOffice.org/"
"GIMP-a"

#: ../../standalone/drakfont:1
#, c-format
msgid "here if no."
msgstr "a ovde ukoliko niste."

#: ../../network/network.pm:1
#, c-format
msgid "DHCP host name"
msgstr "DHCP ime hosta"

#: ../../standalone/drakgw:1
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Maksimalno pu�tanje (u sekundama)"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Izaberite na koji serijski port je va� mi� priklju�en."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr "Da li radi ispravno?"

#: ../../fs.pm:1
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "Bedna"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Report check result by mail"
msgstr "ukoliko ka�ete da, po�aljite rezultat provere mail-om."

#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP start range"
msgstr "DHCP po�etak raspona"

#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "Nesigurno"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s sektora"

#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "No"
msgstr "Ne"

#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "Gvadalupe"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Kannada"
msgstr "Kanada"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font.\n"
msgstr "ne mogu da prona�en nijedan font.\n"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Da li �elite da BackSpace da vrati Delete u konzolu?"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertikalna frekvencija"

#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "Pokre�em korak `%s'\n"

#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr "Niger"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing %s ..."
msgstr "Ukanjam %s ..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "Bez �tampa�a"

#: ../../standalone/logdrake:1
#, c-format
msgid "alert configuration"
msgstr "konfiguracija alarma"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr "NetWare opcije �tampa�a"

#: ../../standalone/draksplash:1
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "%s BootSplash (%s) pregled"

#: ../../standalone/drakbackup:1
#, c-format
msgid "February"
msgstr "Februar"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "General"
msgstr "Op�te"

#: ../../security/l10n.pm:1
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "Dodaj korisnika"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Pode�avanje mre�e (%d adaptera)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "April"
msgstr "April"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "deaktiviraj sad"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Teku�i paket %s nedostaje"

#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr "Filipini"

#: ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1
#: ../../standalone/draksec:1 ../../standalone/mousedrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Ok"
msgstr "U redu"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "drakTermServ Overview"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "Print Queue ime:"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "Da li �elite da koristite aboot ?"

#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "Beloruski"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ podr�ava samo lokalne �tampa�e, udaljene LPD �tampa�e, i Socket/TCP "
"�tampa�e.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "Premesti fajlove na novu particiju"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Ovde mo�ete dodati CUPS servere �ije �tampa�e �elite da koristite. Ovo treba "
"da uradite samo ukoliko serveri ne �alju informacije o �tampa�u na lokalnu "
"mre�u."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodo�li u �arobnjak za pode�avanje �tampa�a\n"
"\n"
"Ovaj �arobnjak �e vam pomo�i da instalirate svoj(e) �ampa�(e) povezane na "
"ovaj ra�unar, poezan direktno na mre�u.\n"
"\n"
"Ukoliko imate �tampa�(e) povezane na ovu ma�inu, priklju�ite ih na ra�unar "
"kao i u elektri�no napajanje da bi mogli biti auto-detektovani.\n"
"\n"
"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne �elite da sada "
"pode�avate va� �tampa�(e)."

#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Catalog"
msgstr "Obnovi iz Kataloga"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"

#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montiranje particije %s u direktorijum %s nije uspelo"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo screen"
msgstr "Lilo ekran"

#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO sa grafi�kim menijem"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "Procenjujem"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Mo�ete deselektovati ovaj paket jer je ve� instaliran"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", �tampa� \"%s\" na SMB/Windows serveru \"%s\""

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "Svejedno nastaviti dalje ?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Tra�im dustupne pakete za reizgradnju rpm baze podataka..."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      DrakBackup Izve�taj \n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Ovo izgleda nije medij na koji mo�e da se snima!"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "Navedite opcije"

#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "New user list:\n"
msgstr ""
"\n"
"- Korisni�ki fajlovi:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Morate dati ili ime servera ili njegov IP!"

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
"SILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni SILO, ili "
"SILO ne\n"
"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
"Ukoliko �elite da kreirate startnu disketu za va� sistemubacite disketu u "
"pogon i pritisnite \"Da\"."

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Ne mo�ete koristiti enkriptovani fajl sistem za ta�ku montiranja %s"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Podesite istoriju pam�enja lozinki da bi spre�ili ponovnu upotrebu lozinke."

#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr "Norfolk Ostrva"

#: ../../standalone/drakboot:1
#, c-format
msgid "Theme installation failed!"
msgstr "Instalacija teme nije uspela!"

#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "Nema �ta da se uradi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "Koristi za loopback"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Mandrake Program za Prijavljivanje Gre�aka"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Apply filter"
msgstr "Primeni filter"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr "koristi pppoe"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "Preme�tanje fajlova na novu particiju"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"

#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "Napredno"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr "Prebaci"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (�vedski)"

#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "Avganistan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "More Options"
msgstr "Vi�e Opcija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "Obri�ite tar fajove na tvrdom disku nakon backup-a na drugi medij."

#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron je standardni UNIX program koji pokre�e korisni�ke programe\n"
"preriodi�no u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
"uklju�uju�i bolju  sigurnost i bolju podesivost."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add Client -->"
msgstr "Dodaj Klijenta -->"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "PA�LJIVO PRO�ITAJ !"

#: ../../standalone/drakbackup:1
#, c-format
msgid "RW"
msgstr "RW"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Molim Vas da\n"
"ukucate va� tv sistem i zemlju"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "Port"

#: ../../standalone/drakgw:1
#, c-format
msgid "No (experts only)"
msgstr "Ne (samo eksperti)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No kernel selected!"
msgstr "Nijedan kernel nije izabran!"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-GID"
msgstr "Podesi-GID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "Nepodudarnost enkripcionih klju�eva (lozinki)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "USB printer"
msgstr ", USB �tampa�"

#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "Desni \"Windows\" taster"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "ukoliko je pode�eno na da, prverite praznu lozinku u /etc/shadow."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
"Pre nego �to nastavite pa�ljivo pro�itajte uslove licence. Ona\n"
"pokriva celu Mandrake Linux distribuciju, i ukoliko se  sla�ete\n"
"sa svim uslovima koji se nalaze u njoj, kliknite na \"Prihvatam\" taster\n"
"Ukoliko ne prihvatate, jednostavno isklju�ite \n"
"ra�unar."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Ovde se nalazi lista dostupnih opcija za �tampanje za teku�i �tampa�:\n"
"\n"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "Rezolucija"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall konfigurator\n"
"\n"
"On konfiguri�e li�ni firewall za ovu Mandrake Linux ma�inu.\n"
"Za mo�no firewall re�enje, pogledajte\n"
"specijalizovanu MandrakeSecurity Firewall distribuciju."

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Unesite svoje korisni�ko ime, lozinku i domen da bi mogli da pristupite "
"hostu."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Remove selected host"
msgstr "Ukloni selektovanog hosta"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "Pode�avanje mre�e"

#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "Nema zajedni�kog deljenja"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule down one level"
msgstr "Spusti odabrano pravilo za jedan nivo"

#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "TB"

#: ../../standalone/drakbackup:1
#, c-format
msgid "FATAL"
msgstr "FATALNA"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Refresh the list"
msgstr "Osve�i listu"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"DHCP server �e omogu�iti drugi ra�unarima da startuju koriste�i PXE u datom "
"rasponu adresa.\n"
"\n"
"Mre�na adresa %s koristi netmask od %s.\n"
"\n"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Delete"
msgstr "Obri�i"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Ja mogu podesti va� ra�unar da automatski podi�e X okru�enje pri startanju.\n"
"Da li �elite X okru�enje pri restartu ?"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Build the disk"
msgstr "Kreiraj disk"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnect %s"
msgstr "Diskonektuj %s"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Status:"
msgstr "Status:"

#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: ../../standalone/logdrake:1
#, c-format
msgid "SSH Server"
msgstr "SSH Server"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Mre�a preko rsync.\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol"
msgstr "Evropski protokol"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", �tampa� \"%s\" na serveru \"%s\""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""
"Proverite da li je cron demon uklju�en u va�e servise. \n"
"\n"
"Mo�ete primetiti da svi 'net' mediji tako�e koriste hard disk."

#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/drakboot:1 ../../standalone/drakbug:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr "Gre�ka"

#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "dozvoli \"su\""

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "Australija"

#: ../../standalone/drakfont:1
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "sa�ekajte, u toku je ttmkfdir..."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Podesi samo karticu \"%s\"%s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
msgstr "Nivo"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr "Promenite sistem za �tampanje"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Va� sistem podr�ava multiple head konfiguraciju.\n"
"�ta �elite da uradite?"

#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "Podesi servise"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Broadcast Address:"
msgstr "Broadcast Adresa:"

#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "montiranje nije uspelo: "

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"GNU/Linux kernel mora da pokrene ra�unsku petlju  pri startanju da bi "
"inicijalizovao broja� vremena.  Njegov rezultat je uskladi�ten kao bogomips "
"kao neka vrsta \"benchmarka\" za procesor."

#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "Slika"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "Neuspelo dodavanje �tampa�a \"%s\" u Star Office/OpenOffice.org/GIMP"

#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "Udaljena administracija"

#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr "PCMCIA podr�ka ne postoji vi�e za 2.2 kernele. Koristite 2.4 kernel."

#: ../../standalone/drakfont:1
#, c-format
msgid "Selected All"
msgstr "Selektuj Sve"

#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Op�ti Unix-ov sistem za �tampanje"

#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
msgstr "Webmin Servis"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "device"
msgstr "ure�aj"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "Unesite direktorijum da bi u njega sa�uvali:"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "Gr�ka"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "Sve"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Koji sistem za �tampanje (spooler) �elite da koristite ?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "July"
msgstr "Jul"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Prints into %s"
msgstr ", �tampaj na %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
msgstr "Xm,pojavila se gre�ka"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Ovaj paket mora biti a�uriran\n"
"Da li sigurno �elite da ga deselektujete ?"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamilski (raspored na pisa�oj ma�ini)"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Use password to authenticate users."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Koristi lozinku za autentifikaciju korisnika."

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli listu korisnika na sistemu u menad�erima za displej (kdm "
"i gdm)."

#: ../../standalone/drakautoinst:1
#, c-format
msgid "manual"
msgstr "upustvo"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Filename text to search for:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Proizvo�a�, model i drajver �tampa�a"

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Medij nije prisutan, ili je za�ti�en oid upisa za ure�aj %s.\n"
"Molim vas da ga ubacite."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktorijum %s ve� sadr�i neke podatke\n"
"(%s)"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "�tampa� na NetWare serveru"

#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "Prika�i veli�inu RAM-a u Mb"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Friday"
msgstr "Petak"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnection from Internet complete."
msgstr "Diskonektovanje za Interneta zavr�eno."

#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "Pravo ime"

#: ../../standalone/drakfont:1
#, c-format
msgid "done"
msgstr "ura�eno"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Deselektujte ili uklonite ih slede�i put."

#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "Vi�lji"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Izaberi particije za formatiranje"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"TV kartica na va�em ra�unaru nije detektovana. Proverite da li Linux-"
"supported Video/TV kartica pravilno priklju�ena.\n"
"\n"
"\n"
"Mo�ete posetiti na�u bazu podr�anog hardvera na:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't find %s on %s"
msgstr "Ne mogu prona�em  %s na %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "Japanski 106 tastera"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "This will take a few minutes."
msgstr "Ovo �e potrajati nekoliko minuta."

#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: ../../standalone/drakbackup:1
#, c-format
msgid "June"
msgstr "Jun"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use scanners on remote computers"
msgstr "Koristi skenere na udaljenim ra�unarima"

#: ../../standalone/drakperm:1
#, c-format
msgid "Delete selected rule"
msgstr "Izbri�i odabrano pravilo"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Pristupam �ampa�ima na udaljenim CUPS serverima"

#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr "Ubacite disketu u ure�aj %s"

#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr "Maldivi"

#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "kompakt"

#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 minut"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "type: fat"
msgstr "tip: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "na kanalu %d ID %d\n"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", multi-funkcionalni ure�aj"

#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr "Laos"

#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful "
"tool to fully adapt your computer to the use you make of it. Configure and "
"customize elements such as the security level, the peripherals (screen, "
"mouse, keyboard...), the Internet connection and much more!"
msgstr ""

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Aktiviraj/Deaktiviraj proveru promiskuiteta mre�nih kartica."

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Ne postoje FAT particije kojima se mo�e promeniti veli�ina  (ili nema "
"dovoljno slobodnog prostora)"

#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
msgstr "gore"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Firewall"
msgstr "Za�titni zid (Firewall)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Area:"
msgstr "Podru�je :"

#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA kontroleri"

#: ../../fs.pm:1
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "Server �tampa�a:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Custom configuration"
msgstr "Custom konfiguracija"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Uka�ite na mesto gde se nalazi instalacioni image.\n"
"\n"
"Ukoliko nemate takav direktorijum, kopirajte sadr�aj CD ili DVD diska.\n"
"\n"

#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Sveti Pjer i Mikelon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "September"
msgstr "Septembar"

#: ../../standalone/draksplash:1
#, c-format
msgid "saving Bootsplash theme..."
msgstr "snimam Bootsplash temu..."

#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr "Portugal"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "Da li imate jo� jedan?"

#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr ", �tampaj na %s"

#: ../../network/network.pm:1
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Dodelite ime hosta za DHCP adresu"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "Pre�i na normalni mod"

#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "Generic"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindar %d do %d\n"

#: ../../standalone/drakbug:1
#, c-format
msgid "YOUR TEXT HERE"
msgstr ""

#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr "Novi profil..."

#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "NONE"
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Koji disk �elite da premestite?"

#: ../../standalone/draksplash:1
#, c-format
msgid "Display logo on Console"
msgstr "Prika�i logo u konzoli"

#: ../../any.pm:1
#, c-format
msgid "Windows Domain"
msgstr "Windows Domen"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Saami (norwegian)"
msgstr "Dvorak (Norve�ki)"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Interfejs %s (na mre�i %s)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "INFO"
msgstr "INFO"

#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr "Valis i Futuna"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Prvo morate da kreirate /etc/dhcpd.conf !"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Is FPU present"
msgstr "da je FPU prisutan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Nema skenera koji su direktno povezani na va�u ma�inu.\n"

#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"�alim ali nema dodatnih informacija\n"
"o ovom servisu."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Single NIC -->"
msgstr "Build Single NIC -->"

#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr "Mar�alova Ostrva"

#: ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "Da li je ovo ispravno ?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Windows (FAT32)"
msgstr "Windows(FAT32)"

#: ../../steps.pm:1
#, c-format
msgid "Root password"
msgstr "Root lozinka"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build All Kernels -->"
msgstr "Kompajliraj Sve Kernele -->"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "ure�aj"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr "ukoliko je pode�eno na da, prijavite fajlove bez vlasnika."

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud"
"\\@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"Ovo je HardDrake, Mandrake-ov alat za pode�avanje hardvera.\n"
"Verzija:"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Hm, nema swap particije\n"
"\n"
"Svejedno nastaviti dalje ?"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "Version: "
msgstr "Verzija: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Server IP missing!"
msgstr "Nedostaje IP server!"

#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr "Surinam"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "Snimi na disketu"

#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
msgstr "Omogu�i ACPI"

#: ../../fs.pm:1
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: ../../help.pm:1
#, c-format
msgid "Graphical Environment"
msgstr "Grafi�ko Okru�enje"

#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "Gilbratlar"

#: ../../network/modem.pm:1
#, c-format
msgid "Do nothing"
msgstr "Ne radi ni�ta"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete Client"
msgstr "Obri�i Klijenta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "Vrsta tatote�nog sistema:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "Startujem mre�u ..."

#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr "Vijetnam"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Fields description"
msgstr "/_Opis polja"

#: ../../share/advertising/10-security.pl:1
#, c-format
msgid "Optimize your security by using Mandrake Linux"
msgstr "Optimizute svoju sigurnost"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
#: ../../standalone/drakperm:1 ../../standalone/draksec:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Help"
msgstr "Pomo�"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""
"ukoliko je pode�eno na da, proverite da li su mre�ni ure�aji u promiscuous "
"modu."

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "Va� li�ni broj telefona"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Koju veli�inu �elite da zadr�ite za prozore"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Test stran(ice)a je poslana �tampa� demonu.\n"
"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Username required"
msgstr "Potrebno je Korisni�ko ime"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Device"
msgstr "Ure�aj: "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you may not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may have a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation where your native language and keyboard do\n"
"not match. In either case, this installation step will allow you to select\n"
"an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"U principu, DrakX bira desnu tastaturu za vas (u zavisnosti od toga koji\n"
"ste jezik izabrali) i �ak i ne�ete videti ovaj korak. Ipak, mo�e\n"
"se desiti da niste dobili tastaturu koja odgovara va�em jeziku: na\n"
"primer, ukoliko ste �vajcarac koji govori engleski, verovatno �ete �eleti\n"
"�vajcarsku tastaturu. Ili ukoliko govorite Engleski ali se nalazite\n"
"u Kvebeku, mo�ete se na�i u istoj situaciji. U oba\n"
"slu�aja, mora�ete da se vratite na ovaj instalacioni korak i izaberete\n"
"odgovaraju�u tastaturu sa liste.\n"
"\n"
"Kliknite na taster \"Jo�\" da bi dobili kompletnu listu\n"
"podr�anih tastatura.\n"
"\n"
"Ukoliko izaberete raspored tastature baziran na non-Latin alfabetu, slede�i\n"
"dijalog �e vam ponuditi da izaberete kombinaciju tastera koji �e slu�iti\n"
"da menjate Latin i non-Latin rasporede."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT)  opcije �tampa�a"

#: ../../printer/main.pm:1
#, c-format
msgid "URI: %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrd opcioni argumenti"

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
"Kmail, create your documents with OpenOffice.org."
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protokol za statak sveta"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "I�tampaj test stranice"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Activate now"
msgstr "Aktiviraj sad"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB ili vi�e"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Izaberite test sranicu koju �elite da �tampate.\n"
"Napomena: Ukoliko se radi o foto test stranici mo�e biti potrebno mnogo vi�e "
"vremena da bi se i�tampala a laserski �tampa�i sa malo memorije je �ak ne�e "
"ni i�tampati. U ve�ini slu�ajeva dovoljno je da i�tampate standardnu test "
"stranicu."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Izaberite port na koji je va� ure�aj %s konekovan"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "Nije formatirano\n"

#: ../../standalone/draksec:1
#, c-format
msgid "Periodic Checks"
msgstr "Periodi�ne provere"

#: ../../standalone/drakpxe:1
#, c-format
msgid "PXE Server Configuration"
msgstr "Pode�avanje PXE Servera"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup the system files before:"
msgstr "Backup sistemskih fajlova pre:"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Ovo je standardno sigurnosno okru�enje preporu�eno za ra�unare koji  �e "
"biti  kor��eni za vezu sa Internetom ili kao klijent."

#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "Prvi flopi/disketni ure�aj "

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/Fajl/_Kraj"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "Izaberite novu veli�inu"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Media class"
msgstr "Klasa Medija"

#: ../../standalone/XFdrake:1
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "%s nije podr�an u ovoj verziji Scannerdrake."

#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "Farska Ostrva"

#: ../../standalone/drakfont:1
#, c-format
msgid "Restart XFS"
msgstr "Restartuj XFS"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr "Dodaj hosa/mre�u"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model name"
msgstr "Ime modela"

#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "Albanija"

#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Britanska Indijska Okeanska Teritorija"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Normal Mode"
msgstr "Normalni Mod"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "Nema CDR/DVDR u ure�aju!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "Tip konekcije �tampa�a"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "No network adapter on your system!"
msgstr "Nema mre�nog adaptera u va�em sistemu !"

#: ../../printer/main.pm:1
#, c-format
msgid "Network %s"
msgstr "Mre�a %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr "Malajski"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr "Opcije %s van opsega!"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connect %s"
msgstr "Konektuj %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting CUPS..."
msgstr "Restartujem CUPS..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Kartice za �tampanje/Skeniranje/Foto na \"%s\""

#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duplirana ta�ka montiranja %s"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "ukoliko je pode�eno na da, pokrenite chkrootkit provere."

#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "Konfiguracija Internet konekcije"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "Nepoznati|Generic"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one nearer to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"U vreme kada budete instalirali Mandrake Linux, vrlo je mogu�e da �e neki\n"
"paketi biti a�urirani u odnosu na inicijalno izdanje. Neki bagovi mogu \n"
"biti ispravljeni, a sigurnosni propusti zatvorene. Da bi mogli da koristite "
"ove novije verzije\n"
"mi vam predla�emo da ih skinete sa Interneta. Izaberite\n"
"Da ili \"Da\" ukoliko imate pode�enu Internet konekciju, ili Ne ili \"No\" "
"ukoliko vi�e volite da\n"
"instalirate te nove pakete kasnije.\n"
"\n"
"Izborom na \"Da\" prikazuje se lista mesta sa kojih mo�ete da dobavite noe "
"verzije \n"
"paketa. Izaberite mesto koje vam je najbli�e. Zatim �e se pojaviti stablo sa "
"slelekcijom paketa:\n"
"pregledajte selekciju, i pritisnite \"Instaliraj\" da bi skinuli i\n"
"instalirali selektovni(e) paket(e), ili \"Poni�ti\" za odustajanje."

#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr "Mianmar (Burma)"

#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "Kraj"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "Auto dislociranje"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "Proveri lo�e blokove ?"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Other MultiMedia devices"
msgstr "Drugi multimedijalni ure�aji"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "burner"
msgstr "�tampa�"

#: ../../standalone/drakbug:1
#, c-format
msgid "Bug Description/System Information"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "Default �tampa�"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid "No remote machines"
msgstr "Nema udaljenih ma�ina"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Dobrodo�li u �arobnjak za pode�avanje �tampa�a\n"
"\n"
"Ovaj �arobnjak �e vam pomo�i da instalirate svoj(e) �ampa�(e) povezane na "
"ovaj ra�unar, poezan direktno na mre�u.\n"
"\n"
"Ukoliko imate �tampa�(e) povezane na ovu ma�inu, priklju�ite ih na ra�unar "
"kao i u elektri�no napajanje da bi mogli biti auto-detektovani.\n"
"\n"
"Kliknite na \"Next\" kada ste spremni, i na \"Cancel\" ako ne �elite da sada "
"pode�avate va� �tampa�(e)."

#: ../../any.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "NIS Autentifikacija"

#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opcija``Ograni�ena komandna linika - opcije'' je neupotrebljiva bez lozinke"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Deljenje internet konekcije je trenutno omogu�eno "

#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr "Ujedinjeni Arapski Emirati"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr " IO_0 kartice"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Local Config"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr "Tajland"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "IO_1 kartice"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Search:"
msgstr "Tra�i:"

#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "Kazahstan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
msgstr "Ruteri:"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Write"
msgstr "Upi�i %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "prika�i sve dostupne udaljene CUPS �tampa�e"

#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux Instalacija %s"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unknown driver"
msgstr "Nepoznati drajver"

#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr " Thai tastatura"

#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "Ostrva Buve"

#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "Dialup opcije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Promenite va� Cd-Rom!\n"
"\n"
"Ubacite va� CD ozna�en sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
"spremni.\n"
"Ukoliko ga nemate pritisnite  Poni�ti."

#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "Poljski"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Mre�a preko webdav.\n"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr ", multi-funkcionalni ure�aj na paralelnom portu #%s"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Nije detektovana nijedna mre�na kartica. Pokrenite alat za konfigurisanje "
"hardvera."

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr "Mre�na maska"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "Nije prona�en hard disk"

#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "2 tastera"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC serija (serijski)"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "Kakva je vrsta va�e ISDN kenekcije ?"

#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "Oznaka"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "Snimi na disketu"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check open ports"
msgstr "Detektovano na portu %s"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "Uredi selektovani server"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection"
msgstr "Auto-detekcija �tampa�a"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Koja je od ponu�enih va�a ISDN kartica ?"

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
"Ovaj servis omogu�ava funkcionalnost NFS servera,koji se konfiguri�e preko \n"
"/etc/exports datoteke."

#: ../../standalone/drakbug:1
#, c-format
msgid "Msec"
msgstr "Msec"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Napomena, promenjeno ime:\n"
"%s"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr "Broj capture buffera :"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Va� izbor? (0/1, default `%s') "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Svaka particija koja je novodefinisana mora biti\n"
"formatirana za uptrebu (formatiranje zna�i kreiranje datote�nog(fajl) "
"sistema).\n"
"\n"
"Sada mo�da �elite da reformatirate postoje�e particije da bi izbrisali\n"
"podatke koje sadr�e. Ukoliko �elite to, izaberite particije \n"
"koje �elite da formatizujete.\n"
"\n"
"\n"
"Zapamtite da nije potrebno da reformatirate sve postoje�e particije.\n"
"Morate da reformatirate particije koje sadr�e operativni sistem \n"
"(kao �to su \"/\", \"/usr\" ili  \"/var\") ali ne morate da reformatirate "
"particije koje sadr�e podatke\n"
"koje �elite da zadr�ite (obi�no /home).\n"
"\n"
"Pazite pri biranju particija, posle formatiranja, sv podaci �e \n"
"biti izbrisani i ne�ete ih mo�i povratiti.\n"
"\n"
"Kliknite na \"Slede�e ->\" kada bude spremni da formatirate particije\n"
"\n"
"Kliknite na \"<- Prethodno\" ako �elite da izaberete drugu particiju za svoj "
"novi\n"
"Mandrake Linux sistem.\n"
"\n"
"Kliknite na \"Napredno\" ukoliko �elite da izaberete particije koje �e biti "
"proverene\n"
"da li imaju lo�e sektore."

#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "Francuski"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "�e�ki (QWERTY)"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "Winmodem konekcija"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Hardware probing in progress"
msgstr "Detekcija hardvera u toku"

#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid "Net Device"
msgstr "Xinetd Servis"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "Sa�etak"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, "
"LPT2:, ..., prvi USB �tampa�: /dev/usb/lp0, drugi USB �tampa�: /dev/usb/"
"lp1, ...)."

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Next"
msgstr "Slede�i"

#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Ne mo�ete da instalirate starter na particiju %s\n"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr "Porto Riko"

#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr "(bootp/dhcp/zeroconf)"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Doborodo�li.\n"
"\n"
"Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"paket 'ImageMagick' je potreban da pravilan rad.\n"
"Kliknite na \"U redu\" za bi instalirali 'ImageMagick' ili \"Poni�ti\" za "
"kraj"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litvanski \"number row\"QWERTY"

#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Slede�i paketi �e biti uklonjeni da bi sistem mogao da se a�urira: %s\n"
"\n"
"\n"
"Da li zaista �elite da uklonite ove pakete?\n"

#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "Anigla"

#: ../../any.pm:1
#, c-format
msgid "NIS Domain"
msgstr "NIS Domen"

#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "Antartik"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Korisni�ki fajlovi:\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "Opcije montiranja"

#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "Jamajka"

#: ../../services.pm:1
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Dodeljuje raw ure�aje za blok ure�aje (kao �to su hard disk\n"
"particije), �to mo�e biti korisno za aplikacije kao �to je Oracle ili DVD "
"plejeri"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Samo momenat, pripremam instalaciju"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "�e�ki (QWERTZ)"

#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Track mre�na kartica id (korisno za laptop ra�unare)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr "Broj porta bi trebao da bude broj !"

#: ../../standalone/draksplash:1
#, c-format
msgid "You must choose an image file first!"
msgstr "Morate izabrati prvo sliku!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore from Hard Disk."
msgstr "Povrati (restore) sa Hard Diska"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "Dodaj na LVM"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "DNS server"

#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad i Tobago"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD i LPRng ne podr�avaju IPP �tampa�e.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "Ime hosta:"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Edit"
msgstr "/_Izmeni"

#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "jednostavno"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "O�isti sve"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "Bez test stranice"

#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Foklandska Ostrva"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Boot disk creation"
msgstr "Kreiranje boot diska"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Monday"
msgstr "Ponedeljak"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "Nepoznati model"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"ukoliko je pode�eno na da, ozna�ite fajlove/diretorijume upisivim za sve "
"korisnike."

#: ../../help.pm:1
#, fuzzy, c-format
msgid "authentication"
msgstr "Autentifikacija"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now"
msgstr "Backup Sad"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_File"
msgstr "/_Fajl"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Uklanjanje �tampa�a iz Star Office/OpenOffice.org/GIMP"

#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
"firewall radi za�tite va�e ma�ine od mre�nih napada."

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Editable"
msgstr "onemogu�i"

#: ../../network/ethernet.pm:1
#, fuzzy, c-format
msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
msgstr "Kog dhcp klijenta �elite da koristite ?Postavljeni je dhcp-client"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamilski (ISCII-raspored)"

#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr "Majot"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Argumenti: (size)\n"
"\n"
"Podesite shell veli�inu istorije za komande. Vrednost -1 zna�i da nema "
"linita."

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "%d KB\n"
msgstr "Veli�ina: %d KB\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "Kreiram auto instalacioni flopi"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for scanners ..."
msgstr "Tra�im skenere ..."

#: ../../lang.pm:1
#, c-format
msgid "Russia"
msgstr "Rusija"

#: ../../steps.pm:1
#, c-format
msgid "Partitioning"
msgstr "Particionisanje"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "detektovana mre�na kartica(e)"

#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
msgstr "Dzyslog"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create catalog!"
msgstr "Ne mogu da kreiram katalog!"

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
"Complete your security setup with this very easy-to-use software which "
"combines high performance components such as a firewall, a virtual private "
"network (VPN) server and client, an intrusion detection system and a traffic "
"manager."
msgstr ""

#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Nema dovoljno slobodnog prostora za auto-alociranje"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password"
msgstr "Unesi root lozinku"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable IP spoofing protection"
msgstr ""
"Argumenti: (arg, alert=1)\n"
"\n"
"Omogu�i/Onemogu�i IP spoofing za�titu."

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Ne postoji besplatan drajver za va�u zvu�nu karticu (%s), ali postoji "
"licencirani drajver na \"%s\"."

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Group :"
msgstr "grupa:"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Posle promene veli�ine %s particije svi podaci �e biti izbrisani"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet connection configuration"
msgstr "Konfiguracija Internet konekcija"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""
"Argumenti: (name)\n"
"\n"
"Add the name as an exception to the handling of password aging by msec."

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels"
msgstr "Skeniranje za TV kanale"

#: ../../standalone/drakbug:1
#, c-format
msgid "Kernel:"
msgstr "Kernel:"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_About..."
msgstr "/_O..."

#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
msgstr "Bengalski"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "Karakteristike: "

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Servisi: %d aktiviranih za %d registrovanih"

#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "Napravi startni disk"

#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr "Solomonova Ostrva"

#: ../../standalone/mousedrake:1
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "Molim Vas da testirate mi�a"

#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "Radna grupa(Workgroup):"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP"
msgstr "Ime hosta ili IP za �tampa�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Path or Module"
msgstr "Putanja do hosta ili Modul"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Ime �tampa�a treba da sadr�i samo slova, brojeve i underscore"

#: ../../standalone/drakgw:1
#, c-format
msgid "Show current interface configuration"
msgstr "Prika�i trenutnu konfiguraciju"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Add Printer"
msgstr "�tampa�"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Argument odre�uje da li klijent autorzivan za konekovanje na\n"
"X server na tcp portu 6000 ili nije."

#: ../../help.pm:1
#, c-format
msgid "Development"
msgstr "Razvojna"

#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "Ura�eno"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "Veb Server"

#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "�ile"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tNe uklju�uj Sistemske Fajlove\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Drajveri za inkjet �tampa�e koje je obezbedio Lexmark samo podr�avaju "
"lokalne �tampa�e, a ne i �tampa�e na udaljenim ma�inama ili print serverima. "
"Pove�ite va� �tampa� na lokalni port ili ga podesite na ma�ini na koju je "
"povezan."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Va�  multi-funkcionalni ure�aj je automatski pode�en da bi mogao da skenira. "
"Sada mo�ete da skenirate sa \"scanimage\" (\"scanimage -d hp:%s\" da bi "
"odredili skener koda imate vi�e od jednog) iz komandne linije ili sa "
"grafi�kim interfejsima \"xscanimage\" ili \"xsane\". Ukoliko koristite the "
"GIMP, mo�ete tako�e skenirati biranjem odgovaraju�e stavke u \"File\"/"
"\"Acquire\" meniju. Pogledajte i \"man scanimage\" u komandnoj liniji za "
"vi�e informacija.\n"
"\n"
"Ne koristi \"scannerdrake\" za ovaj ure�aj!"

#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(%s ve� postoji)"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "Instalacija startera"

#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", koristim komandu %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt i Shift tasteri istovremeno"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Flags"
msgstr "Zastave"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Users"
msgstr "Dodaj/Izbri�i Korisnike"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host/network IP address missing."
msgstr "Nedostaje host/mre�na IP adresa."

#: ../../standalone/drakbackup:1
#, c-format
msgid "weekly"
msgstr "nedeljno"

#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Settings"
msgstr "Opcije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Une�ena host/mre�na IP adresa nije ispravna.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""
"Kreiraj/Prebaci\n"
"backup tastere na SSH"

#: ../../any.pm:1
#, c-format
msgid "Here is the full list of available countries"
msgstr "Ovde je predstavljena cela lista dostupnih zemalja"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "Alteernativna test stranica (A4)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Wait please"
msgstr "Molim Vas sa�ekajte"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup user files"
msgstr "Backup-uj korisni�ke fajlove"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "Novi"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the internet or that you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Ovo je najzana�ajnija ta�ka u odlu�ivanju o sigurnosti va�eg GNU/Linux\n"
"sistema: morate da unesete \"root\" lozinku. \"root\" je administrator\n"
"sistema i jedini je ovla�ten da vr�i izmene, dodaje korisnike,\n"
"menja osnovnu konfiguraciju sistema, itd. Ukratko, \"root\" mo�e\n"
"da uradi sve! Zbog toga morate da izaberete lozinku koja te�ko mo�e da se\n"
"pogodi - DrakX �e vam re�i ukoliko je ona suvi�e jednostavna. Kao �to mo�ete "
"da vidite, mo�ete da\n"
"izaberete i da ne unesete lozinku, ali vam ozbiljno preporu�ujemo da to\n"
"neradite iz jednog razloga: nemojte da mislite da to �to ste startovali GNU/"
"Linux da\n"
"va�i drugi operativni sistemi sigurni od gre�aka. Kako \"root\" mo�e da\n"
"presko�i sva ograni�enja i nenamerno izbri�e sve podatke na particiji\n"
"neopreznim pristupom, va�no je da je te�ko\n"
"postati \"root\".\n"
"\n"
"Lozinka treba da bude me�avina brojeva i slova i treba da sadr�i najmanje 8\n"
"karaktera. Nikada ne zapisujte na papir \"root\" lozinku - tako lako\n"
"mo�ete ugroziti sistem.\n"
"\n"
"Me�utim, potrudite se da lozinka ne bude previ�e duga ili komlikovana zato\n"
"�to treba da je zapamtite bez mnogo napora.\n"
"\n"
"Lozinka ne�e biti prikazana na ekranu kada je ukucavate. Sre�om, mo�i �ete\n"
"da je ukucate dva puta da bi smanjili mogu�nost gre�e u kucanju.\n"
"Ukoliko ipak pogre�ite u kucanju, ali dva puta, ova\n"
"``neispravna'' lozinka �e biti kori�tena kada se budete prvi put "
"konektovali.\n"
"\n"
"U Ekspertnomm modu, bi�ete pitani da li �ete se konektovati na\n"
"autentifikacioni server, kao �to je NIS ili LDAP.\n"
"\n"
"Ukoliko va�a mre�a koristi LDAP (ili NIS) protokol za autentifikaciju, "
"selektujte\n"
"\"LDAP\" (ili \"NIS\") za autentifikaciju. Ukoliko to neznate, pitajte\n"
"va�eg mre�nog administratora.\n"
"\n"
"Ukoliko se va� ra�unar ne konektuje na administrirane mre�e, treba da\n"
"izaberete \"Lokalni fajlovi\" za autentifikaciju."

#: ../../security/l10n.pm:1
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option."
msgstr ""
"na ovom mestu, DrakX �e vam dozvoliti da odredite �eljeni nivo sigurnosti\n"
"za va� ra�unar. Kao nepisano pravilo, nivo sigurnosti bi trebao\n"
"ve�i ukoliko ma�ina sadr�i va�ne podatke, ili ukoliko je ma�ina\n"
"direktno vezana na Internet. Spu�tanje sigurnosti uglavnom\n"
"se vidi u opve�anju lako�e rada sa sistemom. Pogledajte \"msec\"\n"
"poglavlje u ``Upupstvo za komandnu liniju''da bi dobavili vi�e informacija\n"
"o nivioima sigurnosti.\n"
"\n"
"Ukoliko ne znate da izaberete, zadr�ite default postavku."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "U�itaj sa diskete"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Slede�i �tama� je auto-detektovan."

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Uses command %s"
msgstr ", koristim komandu %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot Floppy"
msgstr "Boot Floppy"

#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "Norve�ki"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for new scanners ..."
msgstr "Tra�im nove skenere ..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Apache World Wide Web Server"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "Stepping procesora(podmodel (generacija) broj)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "select path to restore (instead of /)"
msgstr "izaberite putanju za obnavljanje (umesto /)"

#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Podesite bootsplash sliku"

#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "Gruzija"

#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "Kina"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Proverite da li su svi �tampa�i povezani i uklju�eni).\n"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Reading data of installed printers..."
msgstr "�itam podatke sa instaliranih �tampa�a..."

#: ../../standalone/drakbackup:1
#, c-format
msgid " Erase Now "
msgstr "Obri�i odmah "

#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "server"

#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Ubacite FAT formatiranu praznu disketu u ure�aj %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "da zna�i da procesor ima aritmeti�ki koprocesor"

#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Samo momenat... primena konfiguracije"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Dobrodosli u GRUB  starter operativnog sistema !"

#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "Grub"

#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr "SCSI kontroleri"

#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "na LPD serveru \"%s\", �tampa� \"%s\""

#: ../../standalone/drakedm:1
#, c-format
msgid "Choosing a display manager"
msgstr "Izbor menad�era za displej"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf ime doma�ina (Host name)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresa treba da bude u formatu 1.2.3.4"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "Promenite sistem za �tampanje"

#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "Ekvador"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Add an item"
msgstr "Dodaj vrednost"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "�tampa�i na ovoj ma�ini su dostupni za ostale ra�unare"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Ne mogu da prona�em potrebni image fajl `%s'."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Nije detektovana zvu�na kartica. Pokrenite \"harddrake\" nakon instalacije"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""
"Dat je pogre�an port: %s.\n"
"Pravilan format je \"port/tcp\" ili \"port/udp\", \n"
"gde je port izme�u 1 i 65535."

#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "Shell"

#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome i Principe"

#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Ne mogu da ulogujem korisni�ko ime %s (neispravna lozinka?)"

#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbejdzan  (latinica)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Package not installed"
msgstr "Paket nije instaliran"

#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "Ameri�ka Samoa"

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr "Postanite MandrakeExpert"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Protocol"
msgstr "Protokol"

#: ../../standalone/drakfont:1
#, c-format
msgid "Copy fonts on your system"
msgstr "Kopiraj fontove u sistem"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake help"
msgstr "Harddrake pomo�"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Mandrake Terminal Server Configuration"
msgstr "Konfiguracija Mandrake Terminalnog servera"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    DrakBackup Detalji Izve�taja\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore all backups"
msgstr "Obnovi sve backup-ove"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " on parallel port #%s"
msgstr " na parelelnom portu #%s"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Argumenti: (length, ndigits=0, nupper=0)\n"
"\n"
"Podesite najmanju du�inu lozinke i najmanji broj brojeva i minimalan broj "
"velikih slova."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr "ukoliko je pode�eno na da, ozna�ite otvorene portove."

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Brisanje medija mo�e da potraje manje vremena."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "Ne mo�ete selektovati/deselektovati ovaj paket"

#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1
#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Warning"
msgstr "Upozorenje"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Ostali fajlovi:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "Ime udaljenog host-a"

#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "pristup X programima"

#: ../../install_interactive.pm:1
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Prora�unavam veli�inu Windows particije"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Refresh"
msgstr "/_Osve�i"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "Italija"

#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "Kajmanska Ostrva"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr "Ime �tampa�a"

#: ../../standalone/drakgw:1
#, c-format
msgid "disable"
msgstr "onemogu�i"

#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "Gre�ka pri demontiranju %s: %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr "Uradi to!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s not responding"
msgstr "%s ne odgovara"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "Ru�no izaberite model"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "Formatiranje"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Naj�e��i na�in za konekciju sa adsl je pppoe.\n"
"Me�utim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "Razno"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr "Zip"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Left Alt key"
msgstr "Desni Alt taster"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Load setting"
msgstr "u�itaj postavku"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake nije mogao da detektuje va� model �tampa�a %s. Izaberite "
"odgovaraju�i model sa liste."

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Set selected printer as the default printer"
msgstr "Podesi ovaj �tampa� kao default"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Ozna�ite �tampa�e koje �elite da prebacite i kliknite na \n"
"\"Prebaci\"."

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "Albanski"

#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr "Litvanija"

#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "Kompakt"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected model: %s %s"
msgstr "Detektovani modeli: %s %s"

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid "MandrakeSoft has selected the best software for you"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "Local files"
msgstr "Lokalne datoteke"

#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "mo�da"

#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr "Panama"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Can't open %s!"
msgstr "Ne mogu prona�em  %s na %s"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Va�a grafi�ka kartica izgleda da ima TV-OUT konektor.\n"
"On se mo�e podesiti da radi kori��enjem frame-buffer-a.\n"
"\n"
"Za ovo morate da pove�ete va�u grafi�ku karticu sa TV-om pre startanja va�eg "
"kompjutera.\n"
"Onda izaberite \"TVout\" postavku u starteru\n"
"\n"
"Da li imate ovu opciju?"

#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Upravo treba da podesite �tampanje na Windows ra�unu sa lozinkom. Usled "
"gre�ke u arhitekturi Samba klijent softvera lozinka se ostavlja u obi�nom "
"tekstu u komandnoj liniji Samba klijenta koji se koristi za preno�enje "
"poslova �tamap�a na Windows server. Tako je mogu�e da svaki korisnik na ovoj "
"ma�ini prika�e lozinku na ekranu koriste�i se komandom  \"ps auxwww\".\n"
"\n"
"mmi vam preporu�ujemo da koristite jednu od slede�ih alternativa (sve u "
"slu�aju da ste sigurni da samo ma�ine sa va�e lokalne mre�e mogu pristupiti "
"va�em Windows serveru, recimo u smislu firewall-a):\n"
"\n"
"Koristite ra�un bez lozinke na va�em Windows serveru, kao \"GUEST\" ra�un "
"ili specijalan ra�un kreran za �tampanje. Nemojte da uklanjate za�titu "
"lozinkesa li�nih ra�una ili ra�una administratora.\n"
"\n"
"Podesite va� Windows server da napravi �tampa�e dostupnim  pod LPD "
"protokolom. Zatim podesite �tampanje sa ove ma�ine sa \"%s\" tipom konekcije "
"u Printerdrake-u.\n"
"\n"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 hiljada boja (16-bitna paleta)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Snimi na Hard Disk na putanju: %s\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove fonts on your system"
msgstr "Ukloni fontove iz sistema"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Upozorenje, mre�ni adapter (%s) ije ve� pode�en.\n"
"\n"
"Da li �elite da ga automatski prekonfiguri�ete?\n"
"\n"
"Mo�ete to u�initi ru�no ali morate da znate �ta radite."

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "X okru�enje na startu"

#: ../../network/netconnect.pm:1
#, c-format
msgid " adsl"
msgstr ""

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "format of floppies supported by the drive"
msgstr "Format disketa koje ure�aj prihvata"

#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nema dovoljno particija za RAID nivo %d\n"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "local config: true"
msgstr "nije pode�eno"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Slede�i �taThe following printers are configured. Double-click on a printer "
"to change its settings; to make it the default printer; or to view "
"information about it."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connected"
msgstr "Konektovan"

#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "Makedonski"

#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr "Mali"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr "Mostovi i sistemski kontroleri"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Save"
msgstr "/Datoteka/_Snimi"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "No details"
msgstr "Bez detalja"

#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "veoma lepo"

#: ../../standalone/draksplash:1
#, c-format
msgid "Preview"
msgstr "Pregled"

#: ../../standalone/drakbug:1
#, c-format
msgid "Remote Control"
msgstr "Udaljena kontrola"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select media for backup..."
msgstr "Izaberite medij koji �elite da korisitite za backup..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Wrong email"
msgstr ""

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 server: %s\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Allow Thin Clients"
msgstr "Dozvoli Thin Klijente"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Gruzijski (\"Ruski\" raspored)"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Options"
msgstr "/_Opcije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "Va� model �tampa�a"

#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(UPOZORENJE! Vi koristite XFS za va�u root particiju,\n"
"pa kreiranje startnog 1.44 Mb flopija verovatno ne�e uspeti,\n"
"zato �to XFS tra�i veliki drajver)."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Obri�ite tar fajlove na hard disku posle backup-a.\n"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Nije prona�en CD ili DVD image, kopirajte instalacioni program i rpm fajlove."

#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
msgid "Mandrake's multipurpose configuration tool"
msgstr "Konfiguracija Mandrake Terminalnog servera"

#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1
#, c-format
msgid "Save"
msgstr "Sa�uvaj"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is unsupported"
msgstr "%s nije podr�an"

#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Podi�e drajvere za va�e usb ure�aje."

#: ../../harddrake/data.pm:1
#, c-format
msgid "Disk"
msgstr "Disk"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "Unesite URI za �tampa�"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work of the "
"worldwide Linux Community."
msgstr ""
"Uspeh MandrakeSoft-a je zasnovan na principu Besplatnog Softvera. Va� novi "
"operativni sistem je rezultat kolaborativnog rada sa delom svetske Linux "
"Zajednice"

#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "Izrael"

#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "Francuska Gvajana"

#: ../../lang.pm:1
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A command line must be entered!"
msgstr "Komandna linija mora biti uneta!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select user manually"
msgstr "Izaberite korisnike ru�no"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "Konfiguracija za transfer �tampa�a"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Da li �elite da omogu�ite �tampanje na gore pomenutim �tampa�ima?\n"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check additions/removals of suid root files"
msgstr ""
"ukoliko je pode�eno na da, ozna�ite dodavanje/uklanjanje za suid root "
"fajlove."

#: ../../any.pm:1
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Da bi ovo radilo sa W2K PDC, verovatno �ete morati da kao admin pokrenete: C:"
"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /i da "
"restartujete server.\n"
"Tako�e �ete morati da imate username/password za  Domain Admin da bi "
"pristupili ma�ini koja ima Windows(TM) domen.\n"
"Ukoliko mre�a jo� uvek nije omogu�ena, Drakx �e poku�ati da pristupi domenu "
"nakon pode�avanja mre�e.\n"
"Ukoliko ovo pode�avanje ne uspe iz nekog razloga i atuentifikacija domena ne "
"radi, pokrenite 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koriste�i va� Windows"
"(tm) Domen, i Admin Username/Password, nakon startanja sistema.\n"
"Komanda 'wbinfo -t' �e testirati da li va�a autentifikacija dobra."

#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use network connection to backup"
msgstr "Korisiti mre�nu konekciju za backup"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Kernel version"
msgstr "Verzija kernela"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various groups, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' group installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the applications that are in the workstation group.\n"
"\n"
" * \"%s\": if plan on using your machine for programming, choose the\n"
"appropriate packages from that group.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Sada je vreme da odredimo koje programe �elite da instalirate na va�\n"
"sistem. Postoje hiljade paketa dostupnih za instalaciju na Mandrake Linux, "
"i \n"
"da bi ih u�inili dostupnijim, sme�teni su u grupe sli�nih aplikacija.\n"
"\n"
"Paketi su sortirani u grupe u odnosu na odgovaraju�u upotrebu na va�oj\n"
"ma�ini. Same grupe su sortirane u �etiri klase. Ove klase mo�ete posmatrati\n"
"kao kontejnere za razli�ite pakete\n"
"Mo�ete me�ati aplikacije iz razli�itih kontejnera, tako da\n"
"iinstalacija ``Radna stanica'' mo�e da sadr�i aplikacije iz \n"
"kontejnera ``Razvojna stanica'' .\n"
"\n"
" * \"Radna stanica\": ukoliko planirate da koristite va�u ma�inu kao radnu "
"stanicu, izaberite jednu ili vi�e odgovaraju�ih grupa.\n"
"\n"
" * \"Razvojna stanica\": ukoliko ma�ina treba da se koristi za "
"programiranje, izaberite �eljenu(e) grupu(e).\n"
"\n"
" * \"Server\": ukoliko �e se ma�ina koristiti kao server, mo�i �ete da \n"
"izaberete koje od naj�e��ih servisa�elite da instalirate na\n"
"ma�inu.\n"
"\n"
" * \"Grafi�ko Okru�enje\": na kraju, ovde �ete izabrati va�e\n"
"omiljeno grafi�ko okru�enje. Morate izabrati bar jedno da bi imali\n"
"grafi�ku radnu stanicu!\n"
"\n"
"Kretanjem kursora mi�a preko imena grupe dobi�ete kratko obja�njenje\n"
"o toj grupi. Ukoliko ne selektujete ni jednu grupu kada izvodite\n"
"osnovnu instalaciju (za razliku od a�uriranja), pojavi�e se dijalog\n"
"sa razli�itim predlozima za minimalnu instalciju:\n"
"\n"
" * \"Sa X-ovima\": Instalira nekoliko paketa radi grafi�kog desktopa\n"
"\n"
" * \"Sa osnovnom dokumentacijom\": Instalira osnovni sistem sa osnovnim "
"alatima\n"
"i njihovom dukumentacijom. Ovaj mod je prakti�an za\n"
"pode�avanje servera\n"
"\n"
" * \"Stvarno minimalna instalacija\":Instalira samo �to je minimano "
"potrebno,\n"
"za rad Linux sistema,naravno samo u komandnoj liniji.Ova instalacija "
"zauzima\n"
"samo 65 Mb\n"
"\n"
"Mo�ete selektovati i  \"Pojedina�no biranje paketa\", koje je korisno "
"ukoliko\n"
"su vam poznati ponu�eni paketi i �elite da imate potpunu \n"
"kontrolu nad svim �to �e biti instalirano.\n"
"\n"
"Ukoliko ste pokrenuli mod \"A�uriranje\",  mo�ete deselektovati sve\n"
"grupe da bi izbegli instalaciju bilo kog novog paketa. Ovo je korisno za "
"popravljanje ili\n"
"a�uriranje postoje�eg sistema."

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Accept user"
msgstr "Prihvati korisnika"

#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "Server"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Left Shift key"
msgstr "Levi \"Windows\" taster"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid " local network"
msgstr "Lokalna(e) mre�a(e)"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "Lo� izbor, probajte ponovo\n"

#: ../../security/l10n.pm:1
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
msgid "Search new servers"
msgstr "Tra�i servere"

#: ../../lang.pm:1
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Herdova i McDonald Ostrva"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "Nema alternativnog drajvera"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "Pre�i na ekspert mod"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr "(na ovoj ma�ini)"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Gateway adresa treba da bude u formatu 1.2.3.4"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
"\"%s\" badzirani win modem je detektovan, da li �elite da instalirate "
"potreban softver ?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "Tra�im ve� instalirane pakete..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: ../../standalone/drakconnect:1
#, c-format
msgid "Driver"
msgstr "Drajver"

#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf �e ponekad izvoditi razne zadatke tokom\n"
"startanja sistema radi odr�avanja i pode�avanja sistema."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "DVD-R device"
msgstr "ure�aj"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "�tampa� ili Udaljeni lpd server"

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate "
"i koristite na va�em sistemu.\n"
"\n"
"-Mo�ete instalirati fontove na upoobi�ajeni na�in. U re�im slu�ajevimas, "
"bagoviti fontovi mogu sru�iti va� X Server."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot je starter NewWorld MacIntosh hardver. On mo�e da pokrene\n"
"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na va�oj ma�ini.\n"
"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
"instalirani. Ukoliko to nije slu�aj, mo�ete ru�no dodati unos na ovom\n"
"ekranu. Budite pa�ljivi pri izboru parametara.\n"
"\n"
"Osnovne opcije Yaboot-a su:\n"
"\n"
" * Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre \n"
"statrtnog\n"
"prompta.\n"
"\n"
" * Boot ure�aj: Ukazuje gde �elite da smestite informaciju potrebnu za \n"
"startanje GNU/Linux-a. Generalno gledano, mora�ete da podesite bootstrap \n"
"\n"
"particiju pre \n"
"nego podesite ovu informaciju.\n"
"\n"
" * Omogu�i Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu mo�ete \n"
"birati izme�u CD-a, OF starta, MacOS, ili Linux-a.\n"
"\n"
" * Pauza pri startanju kernela: Ova pauza je sli�na pauzi kod LILO "
"startera.\n"
"Nakon \n"
"izbora Linux-a, ima�ete pauzu od 0.1 sekunde pre nego �to se selektuje\n"
"default opis kernela.\n"
"\n"
" * Omogu�i startanje CD-a ?: Ukoliko ozna�ite ovu opciju mo�i �ete da \n"
"izaberete \"C\" za CD pri\n"
"prvom startnom promptu.\n"
"\n"
" * Omogu�i OF startanje?: Ukoliko ozna�ite ovu opciju mo�i �ete da "
"izaberete \n"
"\"N\" za Open\n"
"Firmware pri prvom startnom promptu.\n"
"\n"
" * Default OS: Mo�ete da izaberete koji operativni sistem �e biti pokretan \n"
"kao default kada Open Firmware \n"
"pauza zavr�i."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wednesday"
msgstr "Sreda"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "Nema�ka"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "Austrija"

#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "Nema mi�a"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Choose your CD/DVD media size (MB)"
msgstr "Izaberite veli�inu va�eg CD/DVD medija (Mb)"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check permissions of files in the users' home"
msgstr ""
"ukoliko je pode�eno na da, proverite ovla��enja za fajlove u korisni�kom "
"home diretorijumu."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Pokrenite \"sndconfig\" nakon isntalacije da bi podesili svoju zvu�nu karticu"

#: ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "Skupi stablo"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install Configurator"
msgstr "Autoinstalacioni konfigurator"

#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "Podesi mre�u"

#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Gde biste da instalirate starter?"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will be installed. Additionally, the\n"
"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
"however that this is an experimental feature. If you select different\n"
"languages requiring different encoding the unicode support will be\n"
"installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Va� izbor jeika �e uticati na jezik dokumentacije,\n"
"instalacije i sistema uop�te. Prvo izaberite region u kojem se nalazite,\n"
"a zatim jezik koji govorite.\n"
"\n"
"Klikom na taster \"Napredno\" omogu�i�ete sebi da vidite druge\n"
"jezike koje mo�ete instalirati na va�u radnu stranicu. Biranjem drugih "
"jezika\n"
"�ete instalirati fajlove vezane (za specificirane jezike) za dokumentaciju "
"i\n"
"aplikacije. Na primer, ukoliko �e na va�em ra�unaru hostovati korisnici iz "
"�panije\n"
"izaberite Engleski kao glavni a na stablu\n"
"ozna�ite i \"�paniski|�panija\".\n"
"\n"
"Zapamtite da mo�ete instalirati vi�e jezika. Kada izaberete sve �eljene\n"
"dodatne lokalizacije kliknite na taster \"U redu\" da bi nastavili.\n"
"\n"
"Da bi menjali razli�ite jezike koji su instalirani na va�em sistemu, mo�ete "
"pokrenuti\n"
" \"/usr/sbin/localedrake\" komandu kao \"root\" da bi promenili jezik koji "
"se \n"
"koristi u celom sistemu. pokretanjem komande kao regularni korisnik samo "
"�ete promeniti\n"
"postavke jezika za datog korisnika."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr "%s nije podr�an u ovoj verziji Mandrake Linux-a."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "tape"
msgstr "Traka"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP client"
msgstr "DHCP klijent"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli listu korisnika na sistemu u menad�erima za displej (kdm "
"i gdm)."

#: ../../mouse.pm:1
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech mouse (serijski, stari C7 tip)"

#: ../../partition_table.pm:1
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Otvaranje iz datoteke %s nije uspelo: %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Ne mogu pro�itati tabelu particija ure�aj %s , mnogo je iskvarena za mene :"
"(\n"
"Poku�a�u dalje zaobilaze�i lo�e particijeMogu poku�ati da formatiram lo�e "
"particije (SVI PODACI �e biti izgubljeni !).\n"
"Drugo re�enje je da se DrakX onemogu�i da modufikuje tabelu particija.\n"
"(gre�ka je %s)\n"
"\n"
"Da li se pristajete da izgubite sve particije?\n"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Find Package"
msgstr "%d paketa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Da li ste sigurni da �elite da podesite �tampanje na ovoj ma�ini?\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "New devfs device"
msgstr "Novi devfs ure�aj"

#: ../../standalone/drakbackup:1
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr "GRE�KA: Nije mogu�e povezivanje %s."

#: ../../standalone/drakboot:1
#, c-format
msgid "Boot Style Configuration"
msgstr "Konfiguracija stila startanja"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Automatska sinhronizacija vremena (preko NTP-a)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files not found at %s."
msgstr "Backup fajlvi nisu prona�eni na %s."

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (phonetic)"
msgstr "Jermenski (fonetski)"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Card model:"
msgstr "Model kartice :"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Thin Client"
msgstr "Thin klijent"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Thank you for choosing Mandrake Linux 9.2"
msgstr "Hvala vam �to ste izabrali Mandrake Linux 9.2"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Start Server"
msgstr "Pokreni Server"

#: ../../lang.pm:1
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "All remote machines"
msgstr "Sve udaljene ma�ine"

#: ../../standalone/drakboot:1
#, c-format
msgid "Install themes"
msgstr "Instaliraj teme"

#: ../../help.pm:1
#, c-format
msgid "Espanol"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing installation"
msgstr "Pripremam instalaciju"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected host/network"
msgstr "Uredi selektovanog hosta/mre�u"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add User -->"
msgstr "Dodaj Korisnika -->"

#: ../../lang.pm:1
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type fonts installation"
msgstr "Instalacija True Type fontova"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "Auto-detekcija �tampa�a povezanih direktno na lokalnu mre�u"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN configuration"
msgstr "LAN konfiguracija"

#: ../../standalone/harddrake2:1
#, c-format
msgid "hard disk model"
msgstr "model hard diska"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Ne mo�ete koristiti logi�ku LVM particiju za ta�ku montiranja %s"

#: ../../standalone/drakfont:1
#, c-format
msgid "Get Windows Fonts"
msgstr "Dobavi Windows fontove"

#: ../../mouse.pm:1
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../keyboard.pm:1
#, c-format
msgid "Iranian"
msgstr "Iranski"

#: ../../lang.pm:1
#, c-format
msgid "Croatia"
msgstr "Hrvatska"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add server"
msgstr "Dodaj server"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name"
msgstr "Ime udaljeni �tampa�a"

#: ../../share/advertising/10-security.pl:1
#, c-format
msgid ""
"MandrakeSoft has designed exclusive tools to create the most secured Linux "
"version ever: Draksec, a system security management tool, and a strong "
"firewall are teamed up together  in order to highly reduce hacking risks."
msgstr ""

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Device: "
msgstr "Ure�aj: "

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "License agreement"
msgstr "LIcencirani ugovor"

#: ../../standalone/draksec:1
#, c-format
msgid "System Options"
msgstr "Sisitemske opcije"

#: ../../security/level.pm:1
#, c-format
msgid "Please choose the desired security level"
msgstr "Izaberite �eljeni sigurnosni nivo"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Ovaj host ve� postoji na listi, i ne mo�e se ponovo dodati.\n"

#: ../../printer/main.pm:1
#, c-format
msgid ", USB printer"
msgstr ", USB �tampa�"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"Ne mogu korektno da zatvorim mkbootdisk: \n"
" %s \n"
" %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: ../../standalone/drakfont:1
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Izaberite aplikacije koje �e podr�avati fontove :"

#: ../../steps.pm:1
#, c-format
msgid "Configure X"
msgstr "Konfigurisanje X-a"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "hd"
msgstr "�ad"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Turski (tradicionalni \"F\" model)"

#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
msgstr "�estitamo !"

#: ../../standalone/drakperm:1
#, c-format
msgid "Use owner id for execution"
msgstr "Koristi id vlasnika za izvr�avanje"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr ""
"Argumenti: (arg)\n"
"\n"
"Dozvoli/Ne dozvoli udaljeno root logovanje."

#: ../../standalone/drakperm:1
#, c-format
msgid "Down"
msgstr "Dole"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer (No driver)"
msgstr "Raw �tampa� (bez drajvera)"

#: ../../network/modem.pm:1
#, c-format
msgid "Install rpm"
msgstr "Instaliraj rpm"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Da bi �tampali fajl iz komandne linije (ili prozora terminala) mo�ete ili "
"koristiti komandu \"%s <fajl>\" ili prafi�ki alat za �tampanje: \"xpp <fajl>"
"\" ili \"kprinter <fajl>\". Grafi�ki alati vam dozovoljavaju da izaberete "
"�tampa� i izmenite opcije veoma lako.\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
msgstr "Preostalo vreme"

#: ../../keyboard.pm:1
#, c-format
msgid "UK keyboard"
msgstr "UK tastatura"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Unmount"
msgstr "Demontiraj"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: ../../standalone/drakfont:1
#, c-format
msgid "Uninstall Fonts"
msgstr "Deinstaliraj fontove"

#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
msgstr "Nema�ki (bez mrtvih tastera)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transferring %s..."
msgstr "Transferi�em %s ..."

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 hiljade boja (15-bitna paleta)"

#: ../../any.pm:1
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Mo�ete eksportovati koriste�i NFS ili Samba-u. Koji od ova dva �elite"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Reboot"
msgstr "Restart"

#: ../../lang.pm:1
#, c-format
msgid "Gambia"
msgstr "Gambija"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Control Center"
msgstr "Mandrake Kontrolni Centar"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device"
msgstr ", multi-funkcionalni ure�aj"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Mo�ete uneti razli�ite portove. \n"
"Ispravni primeri su: 139/tcp 139/udp.\n"
"Pogledajte /etc/services za informaciju."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Traka \n"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""
"Nijedan pretra�iva� nije instaliran. Molim Vas da instalirate jedan da bi "
"mogli da koristite sitem dza pomo�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remember this password"
msgstr "Zapamti ovu lozinku"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Deljenje internet konekcije je omogu�eno."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Mre�a preko SSH.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
"Ukoliko je �eljeni �tampa� auto-detektovan, jednostavno ga izaberite sa "
"liste a zatim dodajte korisni�ko ime, lozinku, i/ili radnu grupu ukoliko je "
"potrebno."

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid " cable"
msgstr "Tabela"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Korisiti slobodan prostor na Windows particiji"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s prona�en na %s, da li da ga podesim automatski?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 drajver: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Ovaj host/mre�a ve� postoji na listi, i ne mo�e se ponovo dodati.\n"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
msgstr "Izaberi pakete za instalaciju"

#: ../../lang.pm:1
#, c-format
msgid "Papua New Guinea"
msgstr "Papua Nova Gvineja"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr ", multi-funkcionalni ure�aj na paralelnom portu #%s"

#: ../../keyboard.pm:1
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Srpski (�irilica)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "Unesite direktorijum gde je sme�ten backup"

#: ../../standalone/draksplash:1
#, c-format
msgid "Make kernel message quiet by default"
msgstr "Podesite sa poruka kernela bude skrivena po osnovnoj postavci"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Da li �elite da podesite ovaj �tampa� (\"%s\")\n"
"kao default �tampa�?"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
msgstr "DHCP kraj raspona"

#: ../../any.pm:1
#, c-format
msgid "Creating bootdisk..."
msgstr "Kreiram startni disk..."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Molim Vas sa�ekajte, testiram va�u konekciju..."

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing down the network"
msgstr "Odstupam od mre�e"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Login ID"
msgstr "ID za logovanje"

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
"Ovaj servis omogu�ava funkcionalnost NFS  file locking funkcije"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP Client"
msgstr "DHCP klijent"

#: ../../standalone/drakgw:1
#, c-format
msgid "dismiss"
msgstr "ukloni"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "�tampam/Skeniram na \"%s\""

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
msgstr "omit raid moduli"

#: ../../services.pm:1
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd je print demon potreban  da bi lpr radio dobro.To je \n"
"u osnovi server koji arbitrira  print poslove �tampa�u(ima)."

#: ../../keyboard.pm:1
#, c-format
msgid "Irish"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sunday"
msgstr "Nedelja"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet Connection Configuration"
msgstr "Konfiguracija Internet Konekcija"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated numbers"
msgstr "odvojeni brojevi sa zarezom"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"Kada jednom izaberete ure�aj, mo�i �ete da vidite obja�njenje na poljima "
"prikazanim u desnom okviru  (\"Informacije\")"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule up one level"
msgstr "Podigni odabrano pravilo za jedan nivo"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Slede�i skener\n"
"\n"
"%s\n"
"je direktno povezan na va� sistem\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Da li ho�ete da uklonite �tampa� \"%s\"?"

#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
msgstr "Ne mogu da prona�em slobodan prostor za instaliranje"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Default printer"
msgstr "Default �tampa�"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Vi ste podesili vi�e na�ina za konektovanje na Internet.\n"
"Izaberite jedan od njih koji �elite da koristite.\n"
"\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Modify RAID"
msgstr "Promeni RAID"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
"karticu na slede�em ekranu."

#: ../../any.pm:1
#, c-format
msgid "Add user"
msgstr "Dodaj korisnika"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskovi %s\n"

#: ../../lang.pm:1
#, c-format
msgid "Liberia"
msgstr "Liberija"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Choose your keyboard"
msgstr "Izaberi tastaturu"

#: ../../steps.pm:1
#, c-format
msgid "Format partitions"
msgstr "Formatiraj particije"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Automatska korekcija CUPS konfiguracije"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Running \"%s\" ..."
msgstr "Pokre�em \"%s\" ..."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
msgstr "omogu�i podr�ku za radio"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Deljenje skenera za hostove: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: %s"
msgstr "Ime Loopback datoteke: %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Izaberite �tampa� na koji �e te upu�ivati sve dokumente."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not transfer printers"
msgstr "Ne prebacuj �tampa�e"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Delay before booting the default image"
msgstr "Pauza pre startanja default image-a"

#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"     DUPONT Sebastien (original version)\n"
"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n"
"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
"\n"
" Ovaj program je bespaltan; mo�ete ga redistribuirati i/ili menjati\n"
" pod uslovima GNU General Public License kako je objavljeno\n"
" u Free Software Fondaciji; ili verziji 2, ili (u va�em slu�aju)\n"
" bilo kojoj novijoj verziji.\n"
"\n"
" Ovaj program je distribuiran u nadi da �e biti od koristi,\n"
" sli BEZ IKAKVIH GARANCIJA; �ak i bez garancije za\n"
" KORISNOST i PRAKTI�NU UPOTREBU.  Pogledajte\n"
" GNU General Public Licencu za vi�e detalja.\n"
"\n"
" Trebali bi da mate kopiju GNU General Public Licence\n"
" zajedno sa ovim programom; ukoliko je nemate, pi�ite nam na adresu Free "
"Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Zahvaljujemo se:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Konverzija Windows .pfm  fajla u  .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generi�e fajlove fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Konvertuje ttf font fajlove u afm i pfb fontove\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Hard Disk to backup"
msgstr "Koristi Hard Disk za backup"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
msgid "Configure"
msgstr "Podesi"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""
"Upozorenje, detektovana je jo� jedna Internet konekcija, mo�da koristi va�u "
"mre�u"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Users"
msgstr "Backup-uj Korisnike"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Molim unesite ime va�eg domena, ime hosta, kao IP adrese dodatnih\n"
"'nameserver'-a. Ime va�eg hosta treba da bude puno kvalifikovano ime hosta,\n"
"kao na pr.  ``mybox.mylab.myco.com''.\n"
"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Spooler"
msgstr "Izaberite Spooler za �tampa�"

#: ../../standalone/drakboot:1
#, c-format
msgid "Create new theme"
msgstr "Kreiraj novu temu"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mandrake Tools Explanation"
msgstr "Mandrake Alati za obja�njenja"

#: ../../standalone/drakpxe:1
#, c-format
msgid "No image found"
msgstr "NIje prona�en image"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Neki va�ni paketi nisu dobro instalirani.\n"
"Va� cdrom ure�aj ili cd su neispravni.\n"
"Proverite cdrom na instaliranom kompjuteru koriste�e \"rpm -qpl Mandrake/"
"RPMS/*.rpm\"\n"

#: ../../share/advertising/06-development.pl:1
#, c-format
msgid "Mandrake Linux 9.2: the ultimate development platform"
msgstr "Mandrake Linux 9.2 ultimativna razvojna platforma"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Detected model: %s"
msgstr "Detektovani model: %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "\"%s\" is not a valid email!"
msgstr ""

#: ../../standalone/drakedm:1
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"X11 Menad�er za displej vam dozvoljava da se grafi�ki\n"
"prijavite u va� sistem sa pokrenutim X Window Sistemom i podr�ava "
"pokretanje\n"
"nekoliko razli�itih X sesija na lokalnoj ma�ini u isto vreme."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "ukoliko je pode�eno na da, pokrenite dnevne sigurnosne provere."

#: ../../lang.pm:1
#, c-format
msgid "Azerbaijan"
msgstr "Azerbejd�an"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Device name to use for backup"
msgstr "Unesite ime ure�aja koji koristite za backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No tape in %s!"
msgstr "Nema trake u %s!"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "ovo je fizi�ki bus na koji je ure�aj priklju�en (npr: PCI, USB, ...)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "How is the printer connected?"
msgstr "Kako je �tampa� povezan?"

#: ../../security/level.pm:1
#, c-format
msgid "Security level"
msgstr "Sigurnosni nivo"

#: ../../standalone/draksplash:1
#, c-format
msgid "final resolution"
msgstr "kona�na rezolucija"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services"
msgstr "Servisi"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Radna(Office) stanica"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Office programi: tekst procesori (kword, abiword), tabele (kspread, "
"gnumeric), pdf preglednici, itd"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Stanica za igru"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimedijalna stanica"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Programi za pu�tanje zvuka i videa"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internet stanica"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Skup alata za �itanje i slanje el.po�te i vesti (pine, mutt, tin..) i za "
"pretra�ivanje Interneta"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Mre�ni kompjuter, (klijent)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klijenti za razli�ite protokole uklju�uju�i i ssh"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfiguracija"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Alati za lako konfigurisanje kompjutera"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Nau�na radna stanica"

#: ../../share/compssUsers:999
msgid "Scientific applications such as gnuplot"
msgstr "Nau�ne aplikacije kao �to je gnuplot"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konzolni alati"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "editori,�elovi, alati za datoteke, terminali"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE padna stanica"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop okru�enje, osnovno grafi�ko okru�enje sa kolekcijom prate�ih alata"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome radna stanica"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Grafi�ka okru�enja za setom korisni�kNFS server, SMB server, Proxy serverNFS "
"server, SMB server, Proxy serverih aplikacija i desktopalata"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Drugi grafi�ki desktopovi"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C i C++ razvojne biblioteke, programi  i propratne datoteke"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentacija"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr "LSB"

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr "Linux-ova Standardna Baza. Podr�ka za Third party aplikaicje"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Server, Web/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Mail"
msgstr "Po�ta"

#: ../../share/compssUsers:999
msgid "Postfix mail server"
msgstr "Postfix mail server"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Server,Baze podataka"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL ili MySQL server za bazu podataka"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Server, Firewall/Router"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internet gateway"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS "

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Ime Domena i Mre�ni Informacioni Server"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Mre�ni Server"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, SSH server"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Skup alata za �itanje i slanje el.po�te i vesti (pine, mutt, tin..) i za "
"pretra�ivanje Interneta"

#~ msgid ""
#~ "XawTV isn't installed!\n"
#~ "\n"
#~ "\n"
#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor "
#~ "saa7134\n"
#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n"
#~ "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
#~ "with subject \"undetected TV card\".\n"
#~ "\n"
#~ "\n"
#~ "You can install it by typing \"urpmi xawtv\" as root, in a console."
#~ msgstr ""
#~ "XawTV nije instaliran!\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko imate TV karticu ali je DrakX nije detektovao (bez bttv ili\n"
#~ "saa7134 modula u \"/etc/modules\") niti je instalirao xawtv, molim vas da "
#~ "po�aljete\n"
#~ "rezultate od \"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\"\n"
#~ "sa subjektom \"undetected TV card\".\n"
#~ "\n"
#~ "\n"
#~ "No�ete ga instalirati ukucavanjem \"urpmi xawtv\" kao root, u konzoli."

#~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
#~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"

#~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#, fuzzy
#~ msgid "Hostname configuration"
#~ msgstr "Konfiguracija sistema"

#, fuzzy
#~ msgid "Hostname"
#~ msgstr "Ime hosta:"

#~ msgid "Remote Printers"
#~ msgstr "Udaljeni �tampa�i"

#~ msgid "Printing system: "
#~ msgstr "Sistem za �tampanje: "

#, fuzzy
#~ msgid "Level 1"
#~ msgstr "Nivo"

#, fuzzy
#~ msgid "Level 2"
#~ msgstr "Nivo"

#, fuzzy
#~ msgid "Level 3"
#~ msgstr "Nivo"

#, fuzzy
#~ msgid "Level 4"
#~ msgstr "Nivo"

#, fuzzy
#~ msgid "Level 5"
#~ msgstr "Nivo"

#, fuzzy
#~ msgid "Insert floppy and press %s"
#~ msgstr "Ubacite disketu u ure�aj %s"

#~ msgid "Load"
#~ msgstr "U�itaj"

#, fuzzy
#~ msgid "Bad Ip"
#~ msgstr " IO kartice"

#~ msgid "Output"
#~ msgstr "Output"

#~ msgid "Please relog into %s to activate the changes"
#~ msgstr "Molim, ponovo unesite %s radi aktiviranja promena"