# Translation file of Mandrake graphic install
# Copyright (C) 1999,2000,2001 Mandrakesoft
# Jankovic Tomislav <tomaja@net.yu> 1999,2000,2001
#
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2001-09-21 19:50+0200\n"
"PO-Revision-Date: 2001-08-12 13:12GMT+1\n"
"Last-Translator: Toma Jankovic_<tomaja@net.yu>\n"
"Language-Team: SERBIAN <office@mandrake.co.yu>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-2\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.8\n"

#: ../../Xconfigurator.pm_.c:231
msgid "Configure all heads independently"
msgstr "Podesi sve glave nezavisno"

#: ../../Xconfigurator.pm_.c:232
msgid "Use Xinerama extension"
msgstr "Koristi Xinerama ekstenziju"

#: ../../Xconfigurator.pm_.c:235
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "Podesi samo karticu \"%s\" (%s)"

#: ../../Xconfigurator.pm_.c:238
msgid "Multi-head configuration"
msgstr "Multi-head konfiguracija"

#: ../../Xconfigurator.pm_.c:239
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Va� sistem podr�ava multiple head konfiguraciju.\n"
"Da li to �elte da uradite?"

#: ../../Xconfigurator.pm_.c:248
msgid "Graphic card"
msgstr "Grafi�ka kartica"

#: ../../Xconfigurator.pm_.c:248
msgid "Select a graphic card"
msgstr "Izaberite karticu"

#: ../../Xconfigurator.pm_.c:249
msgid "Choose a X server"
msgstr "Izaberite X server"

#: ../../Xconfigurator.pm_.c:249
msgid "X server"
msgstr "X server"

#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:310
msgid "Which configuration of XFree do you want to have?"
msgstr "Koju XFree konfiguraciju �elite da imate ?"

#: ../../Xconfigurator.pm_.c:321
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."

#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Va�a kartica mo�e imati 3D hardversku akceleraciju sa XFree %s."

#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s sa 3D hardverskom akceleracijom"

#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
"blokiranja ra�unara."

#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"

#: ../../Xconfigurator.pm_.c:344
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
"blokiranja ra�unara.\n"
"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."

#: ../../Xconfigurator.pm_.c:364
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (Instalacija displej drajver)"

#: ../../Xconfigurator.pm_.c:368
msgid "XFree configuration"
msgstr "XFree konfiguracija"

#: ../../Xconfigurator.pm_.c:434
msgid "Select the memory size of your graphic card"
msgstr "Koli�ina memorije na grafi�koj kartici"

#: ../../Xconfigurator.pm_.c:492
msgid "Choose options for server"
msgstr "Opcije za server"

#: ../../Xconfigurator.pm_.c:516
msgid "Choose a monitor"
msgstr "Izaberite monitor"

#: ../../Xconfigurator.pm_.c:516
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfigurator.pm_.c:519
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Morate da navedete horizontalni sinhronizacioni opseg va�eg monitora.\n"
"Mo�ete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
"industrijskim standardima monitora, ili da navedete odre�eni opseg.\n"
"\n"
"VEOMA JE VA�NO da ne navedete tip monitora koji ima ovaj opseg ve�i nego\n"
"�to ga ima va� monitor. Ako niste sigurni, odaberite manje vrednosti."

#: ../../Xconfigurator.pm_.c:526
msgid "Horizontal refresh rate"
msgstr "Horizontalna frekvencija"

#: ../../Xconfigurator.pm_.c:527
msgid "Vertical refresh rate"
msgstr "Vertikalna frekvencija"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor not configured"
msgstr "Monitor nije konfigurisan"

#: ../../Xconfigurator.pm_.c:567
msgid "Graphic card not configured yet"
msgstr "Grafi�ka karta jo� nije konfigurisana"

#: ../../Xconfigurator.pm_.c:570
msgid "Resolutions not chosen yet"
msgstr "Rezolucija jo� nije izabrana"

#: ../../Xconfigurator.pm_.c:587
msgid "Do you want to test the configuration?"
msgstr "Da li ho�ete da testirate konfiguraciju?"

#: ../../Xconfigurator.pm_.c:591
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Upozorenje: testiranje ove grafi�ke kartice mo�e zamrznuti va� kompjuter"

#: ../../Xconfigurator.pm_.c:594
msgid "Test of the configuration"
msgstr "Testiranje konfiguracije"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"poku�ajte sa promenom parametara"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid "An error has occurred:"
msgstr "Hm, gre�ka:"

#: ../../Xconfigurator.pm_.c:668
#, c-format
msgid "Leaving in %d seconds"
msgstr "Izlaz za %d sekundi"

#: ../../Xconfigurator.pm_.c:679
msgid "Is this the correct setting?"
msgstr "Da li je ovo ispravno pode�eno?"

#: ../../Xconfigurator.pm_.c:688
msgid "An error has occurred, try to change some parameters"
msgstr "Hm, pojavila se gre�ka, probajte da promenite parametre"

#: ../../Xconfigurator.pm_.c:759
msgid "Resolution"
msgstr "Rezolucija"

#: ../../Xconfigurator.pm_.c:810
msgid "Choose the resolution and the color depth"
msgstr "Izaberite rezoluciju i broj boja pri prikazu"

#: ../../Xconfigurator.pm_.c:812
#, c-format
msgid "Graphic card: %s"
msgstr "Grafi�ka kartica: %s"

#: ../../Xconfigurator.pm_.c:813
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86 server: %s"

#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
msgid "Expert Mode"
msgstr "Ekspertni mod"

#: ../../Xconfigurator.pm_.c:830
msgid "Show all"
msgstr "Prika�i sve"

#: ../../Xconfigurator.pm_.c:875
msgid "Resolutions"
msgstr "Rezolucija"

#: ../../Xconfigurator.pm_.c:1437
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tip tastature: %s\n"

#: ../../Xconfigurator.pm_.c:1438
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tip mi�a: %s\n"

#: ../../Xconfigurator.pm_.c:1439
#, c-format
msgid "Mouse device: %s\n"
msgstr "Mi� je postavljen na ure�aj: %s\n"

#: ../../Xconfigurator.pm_.c:1440
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfigurator.pm_.c:1441
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor - horizontalna frekvencija: %s\n"

#: ../../Xconfigurator.pm_.c:1442
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor - vertikalno osve�avanje: %s\n"

#: ../../Xconfigurator.pm_.c:1443
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafi�ka kartica: %s\n"

#: ../../Xconfigurator.pm_.c:1444
#, fuzzy, c-format
msgid "Graphic card identification: %s\n"
msgstr "Grafi�ka kartica: %s\n"

#: ../../Xconfigurator.pm_.c:1445
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Memorija na grafi�koj kartici: %s kB\n"

#: ../../Xconfigurator.pm_.c:1447
#, c-format
msgid "Color depth: %s\n"
msgstr "Broj boja: %s\n"

#: ../../Xconfigurator.pm_.c:1448
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezolucija: %s\n"

#: ../../Xconfigurator.pm_.c:1450
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 server: %s\n"

#: ../../Xconfigurator.pm_.c:1451
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 drajver: %s\n"

#: ../../Xconfigurator.pm_.c:1469
msgid "Preparing X-Window configuration"
msgstr "Provera konfiguracije za X-Window sistem"

#: ../../Xconfigurator.pm_.c:1489
msgid "What do you want to do?"
msgstr "�ta �elite da uradite?"

#: ../../Xconfigurator.pm_.c:1494
msgid "Change Monitor"
msgstr "Promena monitora"

#: ../../Xconfigurator.pm_.c:1495
msgid "Change Graphic card"
msgstr "Promena grafi�ke kartice"

#: ../../Xconfigurator.pm_.c:1497
msgid "Change Server options"
msgstr "Promena Server opcija"

#: ../../Xconfigurator.pm_.c:1498
msgid "Change Resolution"
msgstr "Promena rezolucije"

#: ../../Xconfigurator.pm_.c:1499
msgid "Show information"
msgstr "Prika�i informacije"

#: ../../Xconfigurator.pm_.c:1500
msgid "Test again"
msgstr "Testiraj ponovo"

#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
msgid "Quit"
msgstr "Kraj"

#: ../../Xconfigurator.pm_.c:1509
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"Sa�uvaj promene?\n"
"Trenutna konfiguracija je:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1532
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Molim, ponovo unesite %s radi aktiviranja promena"

#: ../../Xconfigurator.pm_.c:1552
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Molim va� izlogujte se i restartujte (Ctrl-Alt-BackSpace) ra�unar"

#: ../../Xconfigurator.pm_.c:1555
msgid "X at startup"
msgstr "X okru�enje na startu"

#: ../../Xconfigurator.pm_.c:1556
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"Ja mogu podesti va� ra�unar da automatski podi�e X okru�enje pri startanju.\n"
"Da li �elite X okru�enje pri restartu ?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 boja (8-bitna paleta)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "32 hiljade boja (15-bitna paleta)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "65 hiljada boja (16-bitna paleta)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "16 miliona boja (24-bitna paleta)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 milijarde boja (32-bitna paleta)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:112
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfigurator_consts.pm_.c:113
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfigurator_consts.pm_.c:114
msgid "64 MB or more"
msgstr "64 MB ili vi�e"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Standardni VGA, 640x480 na 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA, 800x600 na 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 kompat., 1024x768 na 87 Hz sa preplitanjem (ne 800x600)"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "SVGA bez preplitanja, 1024x768 na 60 Hz, 800x600 na 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "Visokofrekventni SVGA, 1024x768 na 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Monitor koji radi sa 1280x1024 na 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Monitor koji radi sa 1280x1024 na 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Monitor koji radi sa 1280x1024 na 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Monitor koji radi sa 1600x1200 na 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Monitor koji radi sa 1600x1200 na 76 Hz"

#: ../../any.pm_.c:96 ../../any.pm_.c:121
msgid "First sector of boot partition"
msgstr "Prvi sektor startne particije"

#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
msgid "First sector of drive (MBR)"
msgstr "Prvi sektor diska (MBR)"

#: ../../any.pm_.c:100
msgid "SILO Installation"
msgstr "SILO instalacija"

#: ../../any.pm_.c:101 ../../any.pm_.c:114
msgid "Where do you want to install the bootloader?"
msgstr "Gde biste da instalirate starter?"

#: ../../any.pm_.c:113
msgid "LILO/grub Installation"
msgstr "LILO/grub instalacija"

#: ../../any.pm_.c:125 ../../any.pm_.c:139
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:127
msgid "LILO with text menu"
msgstr "LILO sa tekstualnim menijem"

#: ../../any.pm_.c:128 ../../any.pm_.c:139
msgid "LILO with graphical menu"
msgstr "LILO sa grafi�kim menijem"

#: ../../any.pm_.c:131
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:135
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Startanje iz DOS/Windows-a (loadlin)"

#: ../../any.pm_.c:137 ../../any.pm_.c:139
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:145 ../../any.pm_.c:177
msgid "Bootloader main options"
msgstr "Glavne opcije startera"

#: ../../any.pm_.c:146 ../../any.pm_.c:178
msgid "Bootloader to use"
msgstr "Starter koji �e se koristiti"

#: ../../any.pm_.c:148
msgid "Bootloader installation"
msgstr "Instalacija startera"

#: ../../any.pm_.c:150 ../../any.pm_.c:180
msgid "Boot device"
msgstr "Startni (boot) ure�aj"

#: ../../any.pm_.c:151
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (ne radi na starim BIOS-ima)"

#: ../../any.pm_.c:152
msgid "Compact"
msgstr "Kompakt"

#: ../../any.pm_.c:152
msgid "compact"
msgstr "kompakt"

#: ../../any.pm_.c:153 ../../any.pm_.c:250
msgid "Video mode"
msgstr "Video mod"

#: ../../any.pm_.c:155
msgid "Delay before booting default image"
msgstr "Pauza pre startanja default image-a"

#: ../../any.pm_.c:157 ../../any.pm_.c:730
#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
#: ../../standalone/draknet_.c:603
msgid "Password"
msgstr "Lozinka"

#: ../../any.pm_.c:158 ../../any.pm_.c:731
#: ../../install_steps_interactive.pm_.c:939
msgid "Password (again)"
msgstr "Lozinka (ponovite)"

#: ../../any.pm_.c:159
msgid "Restrict command line options"
msgstr "Ograni�ena komandna linika - opcije"

#: ../../any.pm_.c:159
msgid "restrict"
msgstr "ograni�eno"

#: ../../any.pm_.c:161
msgid "Clean /tmp at each boot"
msgstr "O�isti /tmp pri svakom startanju"

#: ../../any.pm_.c:162
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Defini�i veli�inu RAM ako je potrebno (detektovano je %d MB)"

#: ../../any.pm_.c:164
msgid "Enable multi profiles"
msgstr "Omogu�i multi-profile"

#: ../../any.pm_.c:168
msgid "Give the ram size in MB"
msgstr "Prika�i veli�inu RAM-a u Mb"

#: ../../any.pm_.c:170
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opcija``Ograni�ena komandna linika - opcije'' je neupotrebljiva bez lozinke"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "Please try again"
msgstr "Probajte ponovo"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "The passwords do not match"
msgstr "Nepodudarnost lozinki"

#: ../../any.pm_.c:179
msgid "Init Message"
msgstr "Inicijalna poruka"

#: ../../any.pm_.c:181
msgid "Open Firmware Delay"
msgstr "Otpo�ni Firmware pauzu"

#: ../../any.pm_.c:182
msgid "Kernel Boot Timeout"
msgstr "Pauza pri startanju kernela"

#: ../../any.pm_.c:183
msgid "Enable CD Boot?"
msgstr "Omogu�i startanje sa CD-a?"

#: ../../any.pm_.c:184
msgid "Enable OF Boot?"
msgstr "Omogu�i OF startanje?"

#: ../../any.pm_.c:185
msgid "Default OS?"
msgstr "Podrazumevani OS ?"

#: ../../any.pm_.c:207
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"Ovo su postavljne opcije.\n"
"Mo�ete dodati nove ili izmeniti stare."

#: ../../any.pm_.c:217
msgid "Add"
msgstr "Dodaj"

#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
#: ../../printerdrake.pm_.c:1948
msgid "Done"
msgstr "Ura�eno"

#: ../../any.pm_.c:217
msgid "Modify"
msgstr "Promeni"

#: ../../any.pm_.c:225
msgid "Which type of entry do you want to add?"
msgstr "Koju vrstu unosa dodajete ?"

#: ../../any.pm_.c:226
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:226
msgid "Other OS (SunOS...)"
msgstr "Drugi OS-ovi (SunOS,BSD,...)"

#: ../../any.pm_.c:227
msgid "Other OS (MacOS...)"
msgstr "Drugi OS-ovi (MacOS,BSD,...)"

#: ../../any.pm_.c:227
msgid "Other OS (windows...)"
msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"

#: ../../any.pm_.c:246
msgid "Image"
msgstr "Slika"

#: ../../any.pm_.c:247 ../../any.pm_.c:258
msgid "Root"
msgstr "Root"

#: ../../any.pm_.c:248 ../../any.pm_.c:277
msgid "Append"
msgstr "Dodatak"

#: ../../any.pm_.c:252
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:253
msgid "Read-write"
msgstr "�itanje-pisanje RW"

#: ../../any.pm_.c:260
msgid "Table"
msgstr "Tabela"

#: ../../any.pm_.c:261
msgid "Unsafe"
msgstr "Nesigurno"

#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
msgid "Label"
msgstr "Oznaka"

#: ../../any.pm_.c:270 ../../any.pm_.c:281
msgid "Default"
msgstr "Podrazumevano"

#: ../../any.pm_.c:278
msgid "Initrd-size"
msgstr "Initrd-veli�ina"

#: ../../any.pm_.c:280
msgid "NoVideo"
msgstr "NoVideo"

#: ../../any.pm_.c:288
msgid "Remove entry"
msgstr "Uklanjam unos"

#: ../../any.pm_.c:291
msgid "Empty label not allowed"
msgstr "Prazna oznaka nije dozvoljena"

#: ../../any.pm_.c:292
msgid "This label is already used"
msgstr "Ova oznaka je ve� u upotrebi"

#: ../../any.pm_.c:597
#, c-format
msgid "Found %s %s interfaces"
msgstr "Prona�eno  %s %s interfejsa"

#: ../../any.pm_.c:598
msgid "Do you have another one?"
msgstr "Da li imate jo� jedan?"

#: ../../any.pm_.c:599
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Imate li jo� %s interfejsa?"

#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "No"
msgstr "Ne"

#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "Yes"
msgstr "Da"

#: ../../any.pm_.c:602
msgid "See hardware info"
msgstr "Pogledaj informacije o hardveru"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:637
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instaliram drajver za %s karticu %s"

#: ../../any.pm_.c:638
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:649
#, c-format
msgid "Which %s driver should I try?"
msgstr "Koji %s drajver da probam?"

#: ../../any.pm_.c:657
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"U nekim slu�ajevima, drajver %s zahteva dodatne informacije\n"
"za pravilan rad, mada mo�e lepo da radi i bez njih. Da li ho�ete\n"
"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
"Mogu�e je da �e proba zaglaviti va� ra�unar, ali ne�e naneti nikakvu �tetu."

#: ../../any.pm_.c:662
msgid "Autoprobe"
msgstr "Automatska proba"

#: ../../any.pm_.c:662
msgid "Specify options"
msgstr "Navedite opcije"

#: ../../any.pm_.c:666
#, c-format
msgid "You may now provide its options to module %s."
msgstr "Mo�ete navesti njegove opcije za modul %s."

#: ../../any.pm_.c:672
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Mo�ete navesti njegove opcije za modul %s.\n"
"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
"Na primer, ``io=0x300 irq=7''"

#: ../../any.pm_.c:675
msgid "Module options:"
msgstr "Opcije modula:"

#: ../../any.pm_.c:686
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Podizanje modula %s neuspelo.\n"
"Da li �elite poku�ate ponovo sa drugim parametrima ?"

#: ../../any.pm_.c:704
#, c-format
msgid "(already added %s)"
msgstr "(%s ve� postoji)"

#: ../../any.pm_.c:708
msgid "This password is too simple"
msgstr "Ova lozinka je previ�e prosta"

#: ../../any.pm_.c:709
msgid "Please give a user name"
msgstr "Odredite korisni�ko ime"

#: ../../any.pm_.c:710
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Korisni�ko ime mo�e sadr�ati samo mala slova, brojeve, `-' i `_'"

#: ../../any.pm_.c:711
msgid "This user name is already added"
msgstr "Ovo korisni�ko ime ve� postoji"

#: ../../any.pm_.c:715
msgid "Add user"
msgstr "Dodaj korisnika"

#: ../../any.pm_.c:716
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Unesi korisnika\n"
"%s"

#: ../../any.pm_.c:717
msgid "Accept user"
msgstr "Prihvati korisnika"

#: ../../any.pm_.c:728
msgid "Real name"
msgstr "Pravo ime"

#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
#: ../../printerdrake.pm_.c:480
msgid "User name"
msgstr "Korisni�ko ime"

#: ../../any.pm_.c:732
msgid "Shell"
msgstr "Shell"

#: ../../any.pm_.c:734
msgid "Icon"
msgstr "Ikona"

#: ../../any.pm_.c:756
msgid "Autologin"
msgstr "Auto logovanje"

#: ../../any.pm_.c:757
#, fuzzy
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Ja mogu podesti va� ra�unar da automatski uloguje jednog korisnika.\n"
"Ukoliko ne �elite da koristite ovu opciju, kliknite na  taster poni�ti"
"(cancel) ?"

#: ../../any.pm_.c:761
msgid "Choose the default user:"
msgstr "Izaberite default (osnovnog) korisnika:"

#: ../../any.pm_.c:762
msgid "Choose the window manager to run:"
msgstr "Izaberite window menadzer koji �elite da koristite:"

#: ../../any.pm_.c:771
msgid "Please, choose a language to use."
msgstr "IZaberite koji jezik �elite da korisitite:"

#: ../../any.pm_.c:773
msgid "You can choose other languages that will be available after install"
msgstr "Mo�ete izabrati drugi jezik koji �e biti dostupan posle instalacije "

#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
msgid "All"
msgstr "Sve"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:259
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n"
"\n"
"Izaberite operativni sistem, ili\n"
"sacekate %d sekundi za startanje pretpostavljenog OS.\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:835
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Dobrodosli u GRUB  starter operativnog sistema !"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:838
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Koristi  %c i %c slova da bi oznacili izbor"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:841
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:844
msgid "commands before booting, or 'c' for a command-line."
msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:847
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Oznaceni izbor se podize automatski za %d sekundi"

#: ../../bootloader.pm_.c:851
msgid "not enough room in /boot"
msgstr "nema dovoljno mesta u /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:951
msgid "Desktop"
msgstr "Desktop"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:953
msgid "Start Menu"
msgstr "Start meni "

#: ../../bootloader.pm_.c:972
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Gde biste da instalirate starter?"

#: ../../bootlook.pm_.c:46
msgid "no help implemented yet.\n"
msgstr "pomo� jo� nije implementirana.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Konfiguracija stila startanja"

#: ../../bootlook.pm_.c:79
msgid "/_File"
msgstr "/_Datoteka"

#: ../../bootlook.pm_.c:80
msgid "/File/_Quit"
msgstr "/Datoteka/_Izlaz"

#: ../../bootlook.pm_.c:80
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "NewStyle Monitor za kategorizaciju"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "NewStyle Monitor"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "Tradicionalni Monitor"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Tradicionalni Gtk+ Monitor"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "Pokreni Auroru pri startanje"

#: ../../bootlook.pm_.c:100
msgid "Lilo/grub mode"
msgstr "Lilo/Grub mod"

#: ../../bootlook.pm_.c:102
#, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Trenutno koristite %s kao Boot menad�er \n"
"Kliknite na Podesi (Configure) da bi pokrenuli pode�avavanje."

#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
msgid "Configure"
msgstr "Podesi"

#: ../../bootlook.pm_.c:108
msgid "Boot mode"
msgstr "Startni mod"

#: ../../bootlook.pm_.c:136
msgid "System mode"
msgstr "Sistemski mod"

#: ../../bootlook.pm_.c:138
msgid "Launch the X-Window system at start"
msgstr "Pokreni X-Window sistem pri stratanju"

#: ../../bootlook.pm_.c:143
msgid "No, I don't want autologin"
msgstr "Ne, ja ne �elim autologovanje"

#: ../../bootlook.pm_.c:145
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Da, ja �elim autologovanje sa ovim(korisnik,desktop)"

#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
#: ../../standalone/draknet_.c:644
msgid "OK"
msgstr "U redu"

#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
msgid "Cancel"
msgstr "Obustavi"

#: ../../bootlook.pm_.c:224
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "ne mogu otvoriti /etc/inittab za �itanje: %s"

#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
msgid "Installation of LILO failed. The following error occured:"
msgstr "Instalacija LILO-a neuspela. Gre�ka je:"

#: ../../common.pm_.c:93
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:93
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:101
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:109
#, c-format
msgid "%d minutes"
msgstr "%d minuta"

#: ../../common.pm_.c:111
msgid "1 minute"
msgstr "1 minut"

#: ../../common.pm_.c:113
#, c-format
msgid "%d seconds"
msgstr "%d sekundi"

#: ../../diskdrake.pm_.c:100
msgid "Please make a backup of your data first"
msgstr "Molim vas, prvo napravite kopiju va�ih podataka"

#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
msgid "Read carefully!"
msgstr "PA�LJIVO PRO�ITAJ !"

#: ../../diskdrake.pm_.c:103
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
"sektorana po�etku \n"
"diska)"

#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
#: ../../install_steps_interactive.pm_.c:37
#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
msgid "Error"
msgstr "Gre�ka"

#: ../../diskdrake.pm_.c:159
msgid "Wizard"
msgstr "�arobnjak (pomo�nik)"

#: ../../diskdrake.pm_.c:181
msgid "New"
msgstr "Novi"

#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
#, fuzzy
msgid "Remote"
msgstr "Udaljeni red:"

#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
msgid "Mount point"
msgstr "Ta�ka montiranja"

#: ../../diskdrake.pm_.c:209
msgid "Options"
msgstr "Opcije"

#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
#: ../../diskdrake_interactive.pm_.c:488
msgid "Type"
msgstr "Tip"

#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
msgid "Unmount"
msgstr "Demontiraj"

#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
msgid "Mount"
msgstr "Montiraj"

#: ../../diskdrake.pm_.c:228
msgid "Choose action"
msgstr "Izaberite akciju"

#: ../../diskdrake.pm_.c:235
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Disk sadr�i jednu veliku FAT particiju\n"
"(uglavnom je koriste MicroSoft Dos/Windows-i, na �alost).\n"
"Predla�em da prvo izmenite veli�nu (resize) te particije (kliknite na nju,\n"
"a potom na \"Promeni veli�inu\")"

#: ../../diskdrake.pm_.c:238
msgid "Please click on a partition"
msgstr "Kliknite na particiju"

#: ../../diskdrake.pm_.c:240
#, fuzzy
msgid "Please click on a media"
msgstr "Kliknite na particiju"

#: ../../diskdrake.pm_.c:243
#, fuzzy
msgid ""
"Please click on a button above\n"
"\n"
"Or use \"New\""
msgstr "Kliknite na particiju"

#: ../../diskdrake.pm_.c:244
msgid "Use \"New\""
msgstr ""

#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
msgid "Details"
msgstr "Detalji"

#: ../../diskdrake.pm_.c:395
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:395
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:395
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:395
#, fuzzy
msgid "Journalised FS"
msgstr "montiranje nije uspelo"

#: ../../diskdrake.pm_.c:395
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:395
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
msgid "Empty"
msgstr "Prazno"

#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
#: ../../services.pm_.c:161
msgid "Other"
msgstr "Drugo"

#: ../../diskdrake.pm_.c:400
msgid "Filesystem types:"
msgstr "Vrsta fajl sistema:"

#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
msgid "Create"
msgstr "Kreiraj"

#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
#, c-format
msgid "Use ``%s'' instead"
msgstr "Umesto toga probajte ``%s''"

#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
msgid "Delete"
msgstr "Obri�i"

#: ../../diskdrake.pm_.c:423
msgid "Use ``Unmount'' first"
msgstr "Prvo uradite ``Demontiraj''"

#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Posle promene tipa particije %s, svi podaci na ovoj particiji �e biti "
"izbrisani"

#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Gde biste da montirate %s ure�aj ?"

#: ../../diskdrake.pm_.c:500
#, fuzzy
msgid "Mount options"
msgstr "Opcije modula:"

#: ../../diskdrake.pm_.c:507
msgid "Various"
msgstr ""

#: ../../diskdrake.pm_.c:525
#, fuzzy
msgid "Removable media"
msgstr "Automontiranje prenosivih medija"

#: ../../diskdrake.pm_.c:532
#, fuzzy
msgid "Change type"
msgstr "Promena tipa particije"

#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
msgid "Which filesystem do you want?"
msgstr "Koju  datote�ni sistem �elite ?"

#: ../../diskdrake.pm_.c:564
msgid "Scanning available nfs shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:569
#, c-format
msgid "Scanning available nfs shared resource of server %s"
msgstr ""

#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
msgid "If the list above doesn't contain the wanted entry, enter it here:"
msgstr ""

#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
msgid "Server"
msgstr "Server"

#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
msgid "Shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:615
msgid "Scanning available samba shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
#, c-format
msgid "Scanning available samba shared resource of server %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose a partition"
msgstr "Izaberite akciju"

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose another partition"
msgstr "Kreiraj novu particiju"

#: ../../diskdrake_interactive.pm_.c:188
#, fuzzy
msgid "Exit"
msgstr "Ext2"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to expert mode"
msgstr "Pre�i na ekspert mod"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to normal mode"
msgstr "Pre�i na normalni mod"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Undo"
msgstr "Poni�ti radnju"

#: ../../diskdrake_interactive.pm_.c:229
msgid "Continue anyway?"
msgstr "Svejedno nastaviti ?"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without saving"
msgstr "Kraj bez snimanja promena"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without writing the partition table?"
msgstr "Kraj bez snimanja promena u tabele particija?"

#: ../../diskdrake_interactive.pm_.c:237
#, fuzzy
msgid "Do you want to save /etc/fstab modifications"
msgstr "Da li ho�ete da testirate konfiguraciju?"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Auto allocate"
msgstr "Auto dislociranje"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Clear all"
msgstr "O�isti sve"

#: ../../diskdrake_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:171
msgid "More"
msgstr "Jo�"

#: ../../diskdrake_interactive.pm_.c:250
#, fuzzy
msgid "Hard drive information"
msgstr "Detekcija hard diska"

#: ../../diskdrake_interactive.pm_.c:267
msgid "Not enough space for auto-allocating"
msgstr "Nema dovoljno slobodnog prostora za eauto-alociranje"

#: ../../diskdrake_interactive.pm_.c:273
msgid "All primary partitions are used"
msgstr "Sve primarne particije su zauzete"

#: ../../diskdrake_interactive.pm_.c:274
msgid "I can't add any more partition"
msgstr "Ne mogu dodati vi�e ni jednu particiju"

#: ../../diskdrake_interactive.pm_.c:275
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Da bi omogu�ili kreiranje jo� (extended) particija izbri�ite jednu od "
"postoje�ih"

#: ../../diskdrake_interactive.pm_.c:285
#, fuzzy
msgid "Save partition table"
msgstr "Upi�i tabelu particija"

#: ../../diskdrake_interactive.pm_.c:286
#, fuzzy
msgid "Restore partition table"
msgstr "Spasi tabelu particija"

#: ../../diskdrake_interactive.pm_.c:287
msgid "Rescue partition table"
msgstr "Spasi tabelu particija"

#: ../../diskdrake_interactive.pm_.c:289
#, fuzzy
msgid "Reload partition table"
msgstr "Spasi tabelu particija"

#: ../../diskdrake_interactive.pm_.c:293
#, fuzzy
msgid "Removable media automounting"
msgstr "Automontiranje prenosivih medija"

#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
msgid "Select file"
msgstr "Izaberite datoteku"

#: ../../diskdrake_interactive.pm_.c:308
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Pohranjena(snimljena) tabela particija nije iste veli�ine\n"
"�elite da nastavite ?"

#: ../../diskdrake_interactive.pm_.c:322
msgid "Warning"
msgstr "Upozorenje"

#: ../../diskdrake_interactive.pm_.c:323
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Ubacite disketu u ure�aj\n"
"Svi podaci na disketi �e biti izbrisani !"

#: ../../diskdrake_interactive.pm_.c:334
msgid "Trying to rescue partition table"
msgstr "Spasavanje tabele particija"

#: ../../diskdrake_interactive.pm_.c:340
#, fuzzy
msgid "Detailed information"
msgstr "Prika�i informacije"

#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
msgid "Resize"
msgstr "Promeni veli�inu"

#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
msgid "Move"
msgstr "Premesti"

#: ../../diskdrake_interactive.pm_.c:356
msgid "Format"
msgstr "Formatiranje"

#: ../../diskdrake_interactive.pm_.c:358
msgid "Active"
msgstr "Aktiviraj"

#: ../../diskdrake_interactive.pm_.c:359
msgid "Add to RAID"
msgstr "Dodaj na RAID"

#: ../../diskdrake_interactive.pm_.c:360
msgid "Add to LVM"
msgstr "Dodaj na LVM"

#: ../../diskdrake_interactive.pm_.c:363
msgid "Remove from RAID"
msgstr "Ukloni sa RAID-a"

#: ../../diskdrake_interactive.pm_.c:364
msgid "Remove from LVM"
msgstr "Ukloni sa LVM-a"

#: ../../diskdrake_interactive.pm_.c:365
msgid "Modify RAID"
msgstr "Promeni RAID"

#: ../../diskdrake_interactive.pm_.c:366
msgid "Use for loopback"
msgstr "Koristi za loopback"

#: ../../diskdrake_interactive.pm_.c:409
msgid "Create a new partition"
msgstr "Kreiraj novu particiju"

#: ../../diskdrake_interactive.pm_.c:412
msgid "Start sector: "
msgstr "Po�etni sektor: "

#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
msgid "Size in MB: "
msgstr "Veli�ina u MB:"

#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
msgid "Filesystem type: "
msgstr "Vrsta tatote�nog sistema:"

#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
#: ../../diskdrake_interactive.pm_.c:1010
msgid "Mount point: "
msgstr "Ta�ka montiranja: "

#: ../../diskdrake_interactive.pm_.c:420
msgid "Preference: "
msgstr "Karakteristike: "

#: ../../diskdrake_interactive.pm_.c:462
#, fuzzy
msgid "Remove the loopback file?"
msgstr "Formatiranje loopback datoteke %s"

#: ../../diskdrake_interactive.pm_.c:486
msgid "Change partition type"
msgstr "Promena tipa particije"

#: ../../diskdrake_interactive.pm_.c:491
msgid "Switching from ext2 to ext3"
msgstr "Menjam ext2 na ext3"

#: ../../diskdrake_interactive.pm_.c:521
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Gde biste da montirate loopback datoteku  %s?"

#: ../../diskdrake_interactive.pm_.c:528
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Demontiranje nije mogu�e,jer se particija korisiti za loop back.\n"
"Prvo uklonite loopback"

#: ../../diskdrake_interactive.pm_.c:549
msgid "Computing FAT filesystem bounds"
msgstr "Prora�unavam granice FAT datote�nog sistema"

#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
#: ../../install_interactive.pm_.c:116
msgid "Resizing"
msgstr "Promena veli�ine (resizing)"

#: ../../diskdrake_interactive.pm_.c:578
msgid "This partition is not resizeable"
msgstr "Ovoj particici nije mogu�e promeniti veli�inu"

#: ../../diskdrake_interactive.pm_.c:583
msgid "All data on this partition should be backed-up"
msgstr "Cvi podaci na ovoj particiji bi trebali biti sa�uvani"

#: ../../diskdrake_interactive.pm_.c:585
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Posle promene veli�ine %s particije svi podaci �e biti izbrisani"

#: ../../diskdrake_interactive.pm_.c:590
msgid "Choose the new size"
msgstr "Izaberite novu veli�inu"

#: ../../diskdrake_interactive.pm_.c:591
#, fuzzy
msgid "New size in MB: "
msgstr "Veli�ina u MB:"

#: ../../diskdrake_interactive.pm_.c:631
msgid "Which disk do you want to move it to?"
msgstr "Koji disk �elite da premestite?"

#: ../../diskdrake_interactive.pm_.c:632
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake_interactive.pm_.c:633
msgid "Which sector do you want to move it to?"
msgstr "Gde �elite da instalirate starter?"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving"
msgstr "Preme�tanje"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving partition..."
msgstr "Preme�tanje particije..."

#: ../../diskdrake_interactive.pm_.c:657
msgid "Choose an existing RAID to add to"
msgstr "Izaberi postoje�i RAID za dodavanje"

#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
msgid "new"
msgstr "novi"

#: ../../diskdrake_interactive.pm_.c:674
msgid "Choose an existing LVM to add to"
msgstr "Izaberi postoje�i LVM za dodavanje"

#: ../../diskdrake_interactive.pm_.c:679
msgid "LVM name?"
msgstr "LVM ime?"

#: ../../diskdrake_interactive.pm_.c:718
msgid "This partition can't be used for loopback"
msgstr "Ova particija ne mo�e biti kori��ena za loopback "

#: ../../diskdrake_interactive.pm_.c:730
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake_interactive.pm_.c:731
msgid "Loopback file name: "
msgstr "Ime Loopback datoteke: "

#: ../../diskdrake_interactive.pm_.c:736
#, fuzzy
msgid "Give a file name"
msgstr "Pravo ime"

#: ../../diskdrake_interactive.pm_.c:739
msgid "File already used by another loopback, choose another one"
msgstr "Fajl se ve� koristi od strane drugog loopback-a,izaberite drugi"

#: ../../diskdrake_interactive.pm_.c:740
msgid "File already exists. Use it?"
msgstr "Datoteka ve� postoji.Da li da ga koristim ?"

#: ../../diskdrake_interactive.pm_.c:784
msgid "device"
msgstr "ure�aj"

#: ../../diskdrake_interactive.pm_.c:785
msgid "level"
msgstr "nivo"

#: ../../diskdrake_interactive.pm_.c:786
msgid "chunk size"
msgstr "chunk veli�ina"

#: ../../diskdrake_interactive.pm_.c:801
msgid "Be careful: this operation is dangerous."
msgstr "PA�LJIVO,ova operacija je opasna."

#: ../../diskdrake_interactive.pm_.c:816
msgid "What type of partitioning?"
msgstr "Koju vrstu particioniranja?"

#: ../../diskdrake_interactive.pm_.c:834
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Nije mogu�e kreirati /boot za sada na hard disku (na cilindru > 1024).\n"
"Ili koristite LILO koji ne radi, ili ga ne koristite pa vam ne treba /boot"

#: ../../diskdrake_interactive.pm_.c:838
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Particija koju ste izabrali za root (/) je fizi�ki locirana iznad\n"
"1024-tog cilindra hard diska,i nemate /boot particiju.\n"
"Ukoliko planirate da korisitite LILO boot menad�er, morate\n"
"dodati /boot particiji."

#: ../../diskdrake_interactive.pm_.c:844
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Izabrali ste softversku RAID particiju kao root (/).\n"
"Nijedan starter ne mo�e da radi sa tim bez /boot particije.\n"
"Zato pazite da dodate /boot particiju"

#: ../../diskdrake_interactive.pm_.c:864
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabela particija za ure�aj %s �e biti zapisana na disk!"

#: ../../diskdrake_interactive.pm_.c:868
msgid "You'll need to reboot before the modification can take place"
msgstr "Morate restartovati ra�unar da bi se izmene izvr�ile"

#: ../../diskdrake_interactive.pm_.c:879
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Posle formatiranja particije %s,svi podaci na ovoj particiji �e biti "
"izbrisani"

#: ../../diskdrake_interactive.pm_.c:881
msgid "Formatting"
msgstr "Formatiranje"

#: ../../diskdrake_interactive.pm_.c:882
#, c-format
msgid "Formatting loopback file %s"
msgstr "Formatiranje loopback datoteke %s"

#: ../../diskdrake_interactive.pm_.c:883
#: ../../install_steps_interactive.pm_.c:419
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiranje particije %s"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Hide files"
msgstr "mkraid neuspelo"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Move files to the new partition"
msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"

#: ../../diskdrake_interactive.pm_.c:895
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:906
#, fuzzy
msgid "Moving files to the new partition"
msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"

#: ../../diskdrake_interactive.pm_.c:910
#, c-format
msgid "Copying %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:914
#, fuzzy, c-format
msgid "Removing %s"
msgstr "Rezolucija: %s\n"

#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
msgid "Device: "
msgstr "Ure�aj: "

#: ../../diskdrake_interactive.pm_.c:938
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"

#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
#: ../../diskdrake_interactive.pm_.c:1014
msgid "Type: "
msgstr "Unesi: "

#: ../../diskdrake_interactive.pm_.c:946
msgid "Name: "
msgstr "Ime: "

#: ../../diskdrake_interactive.pm_.c:954
#, c-format
msgid "Start: sector %s\n"
msgstr "Po�etak: sektor %s\n"

#: ../../diskdrake_interactive.pm_.c:955
#, c-format
msgid "Size: %s"
msgstr "Veli�ina: %s"

#: ../../diskdrake_interactive.pm_.c:957
#, c-format
msgid ", %s sectors"
msgstr ", %s sektora"

#: ../../diskdrake_interactive.pm_.c:959
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Cilindar %d do cilindra %d\n"

#: ../../diskdrake_interactive.pm_.c:960
msgid "Formatted\n"
msgstr "Formatirano\n"

#: ../../diskdrake_interactive.pm_.c:961
msgid "Not formatted\n"
msgstr "Nije formatirano\n"

#: ../../diskdrake_interactive.pm_.c:962
msgid "Mounted\n"
msgstr "Montirano\n"

#: ../../diskdrake_interactive.pm_.c:963
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake_interactive.pm_.c:965
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Loopback fajl(ovi): %s\n"

#: ../../diskdrake_interactive.pm_.c:966
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Boot particija po default-u\n"
"   (za podizanje MS-DOSa, ne za lilo)\n"

#: ../../diskdrake_interactive.pm_.c:968
#, c-format
msgid "Level %s\n"
msgstr "Nivo %s\n"

#: ../../diskdrake_interactive.pm_.c:969
#, c-format
msgid "Chunk size %s\n"
msgstr "Chunk-uj %s\n"

#: ../../diskdrake_interactive.pm_.c:970
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskovi %s\n"

#: ../../diskdrake_interactive.pm_.c:972
#, c-format
msgid "Loopback file name: %s"
msgstr "Ime Loopback datoteke: %s"

#: ../../diskdrake_interactive.pm_.c:975
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Najverovatnije je, da je ova particija\n"
"Driver particija, pa nebi trebali\n"
"da je dirate.\n"

#: ../../diskdrake_interactive.pm_.c:978
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ovo je specijalna Bootstrap\n"
"particija i koristi se\n"
"dual-booting va�eg sistema.\n"

#: ../../diskdrake_interactive.pm_.c:997
#, c-format
msgid "Size: %s\n"
msgstr "Veli�ina: %s\n"

#: ../../diskdrake_interactive.pm_.c:998
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"

#: ../../diskdrake_interactive.pm_.c:999
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake_interactive.pm_.c:1000
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskovi %s\n"

#: ../../diskdrake_interactive.pm_.c:1001
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tip tabele particija : %s\n"

#: ../../diskdrake_interactive.pm_.c:1002
#, c-format
msgid "on bus %d id %d\n"
msgstr "na busu %d ID %d\n"

#: ../../diskdrake_interactive.pm_.c:1016
#, c-format
msgid "Options: %s"
msgstr "Opcije: %s"

#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s Formatiranje  %s nije uspelo"

#: ../../fs.pm_.c:506
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ne znam kako da formatiram %s u tipu %s"

#: ../../fs.pm_.c:568
msgid "mount failed"
msgstr "montiranje nije uspelo"

#: ../../fs.pm_.c:588
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr "fsck provera nije uspela sa kodom %d ili signalom %d"

#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
msgid "mount failed: "
msgstr "montiranje nije uspelo: "

#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
#, c-format
msgid "error unmounting %s: %s"
msgstr "Gre�ka pri demontiranju %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "jednostavno"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "server"

#: ../../fsedit.pm_.c:461
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Ne mo�ete koristiti JFS za particije manje od 16MB"

#: ../../fsedit.pm_.c:462
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Ne mo�ete koristiti ReiserFS za particije manje od 32MB"

#: ../../fsedit.pm_.c:471
msgid "Mount points must begin with a leading /"
msgstr "Ta�ke montiranja moraju da po�inju sa vode�im /"

#: ../../fsedit.pm_.c:472
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Ve� postoji particija sa ta�kom montiranja %s\n"

#: ../../fsedit.pm_.c:476
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Ne mo�ete koristiti logi�ku LVM particiju za ta�ku montiranja %s"

#: ../../fsedit.pm_.c:478
msgid "This directory should remain within the root filesystem"
msgstr "Ovaj direktorijum treba da ostane u root-u  datote�nog sistema"

#: ../../fsedit.pm_.c:480
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr ""
"Potreban vam je pravi datote�ni sistem (ext2, reiserfs) za ovu ta�ku "
"montiranja\n"

#: ../../fsedit.pm_.c:596
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Gre�ka pri otvaranju %s za ispis: %s"

#: ../../fsedit.pm_.c:681
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Dogodila se gre�ka - nije na�en ispravan ure�aj na kojem bi bili krerani "
"novi datote�nog sistemi. Proverite va� hardver da vidite �ta je uzrok ovog "
"problema."

#: ../../fsedit.pm_.c:704
msgid "You don't have any partitions!"
msgstr "Nemate nijednu particiju!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""

#: ../../help.pm_.c:41
#, fuzzy
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Iznad se nalazi lista postoje�ih Linux particija koje su detektovane\n"
"na hard disku. Mo�ete zadr�ati izbor koji je napravio �arobnjak, jer je "
"dobar za a\n"
"op�tu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
"particiju (\"/\"). Nemojte da birate suvi�e malu particiju jer ne�ete mo�i "
"da\n"
"instalirate ovoljno softvera. Ukoliko �elite da podatke staviljate na "
"posebnu particiju ,\n"
"morate da izaberetei i \"/home\" (mogu�e je ukoliko imate vi�e od jedne\n"
"Linux particije).\n"
"\n"
"\n"
"Informacija: svaka particija je prikazana na slede�i na�in: \"Ime\", "
"\"Kapacitet\".\n"
"\n"
"\n"
"\"Ime\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj hard diska"
"\",\n"
"\"proj particije\" (na primer, \"hda1\").\n"
"\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE ure�aj i  \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
"diskovima:\n"
"\n"
"   * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
"   * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
"   * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
"   * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"\n"
"Sa SCSI hard diskovima, a \"a\" zna�i \"primarni hard disk\", a \"b\" zna�i "
"\"sekundarni hard disk \", itd..."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
"knows if a selected package is located on another CDROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CDROM, you will first be\n"
"asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, "
"select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose "
"the\n"
"desired group(s).\n"
"\n"
" * \"Server\": finally, if the machine is intended to be a server, you will\n"
"be able to select which of the most common services you wish to see\n"
"installed on the machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Update\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""

#: ../../help.pm_.c:115
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""

#: ../../help.pm_.c:151
msgid ""
"If you wish to connect your computer to the Internet or to a local network,\n"
"please choose the correct option. Please turn on your device before\n"
"choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"Mandrake Linux proposes the configuration of an Internet connection at\n"
"installation time. Available connections are: traditional modem, ISDN\n"
"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
"(Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about Internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:172
#, fuzzy
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need."
msgstr ""
"Sada mo�ete odabrati koje servise �elite da se startaju pri podizanju "
"sistema.\n"
"\n"
"\n"
"Kada mi�om pre�ete preko oznake servisa, pojavi�e se mali balon za pomo� "
"koji \n"
"opisuje ulogu servisa.\n"
"\n"
"\n"
"Budite posebno pa�ljivi u ovom koraku ukoliko nameravate da korisite ma�inu "
"kao\n"
"server: verovatno �e te �eleti da ne startujete\n"
"bilo koji servis koji\n"
"ne �elite."

#: ../../help.pm_.c:188
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
"local time according to the time zone you selected."
msgstr ""
"GNU/Linux radi sa u GMT (Greenwich Manage Time) i prevodi u lokalno\n"
"uzavisnosti koju ste vremensku zonu odabrali."

#: ../../help.pm_.c:192
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
"the next step. If you cannot see the message, it simply means that the\n"
"configuration was wrong and the test will automatically end after 10\n"
"seconds, restoring the screen."
msgstr ""

#: ../../help.pm_.c:212
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""

#: ../../help.pm_.c:224
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:231
msgid ""
"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
"the prompt. But in case your computer cannot boot from the CDROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector "
"(MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard "
"disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""

#: ../../help.pm_.c:255
#, fuzzy
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this "
"procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""
"U ovom trenutku, morate da izaberete gde �ete instalirati\n"
"Mandrake Linux operativni sistem na va� hard disk. Ukoliko je prazan ili\n"
"postoje�i operativni sistem koristi sav postoje�i prostor na disku, treba da "
"ga\n"
"particionirate. U osnovi, particioniranje hard diska se sastoji logi�kog\n"
"deljenja da bi obezbedili prostor za instalaciju va� novi Mandrake Linux "
"sistem.\n"
"\n"
"\n"
"Po�to se efekti procesa particioniranja obi�no nepovratni,\n"
"particionirnje mo�e biti prili�no stresan za neiskusne korisnike.\n"
"Ovaj �arobnjak pojednostavljuje ovaj proces. Pre po�etka, "
"konsultujteupustvo\n"
"i ne �urite.\n"
"\n"
"\n"
"Morate da imate ili da kreirate najmanje dve particije. Jedna je za sam "
"operativni sistem adruga\n"
"je za virtuelnu memoriju (�esto se naziva i Swap).\n"
"\n"
"\n"
"Ukoliko su particije ve� kreirane (od predhodne instalacije ilikreirane\n"
"drugim alatom za particioniranje), morate izabrati na koje od njih "
"�eteinstalirati \n"
"Linux sistem.\n"
"\n"
"\n"
"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
"Da bi to uradili, mo�ete da koristite gore postavljeni �arobnjak. U "
"zavisnosti id konfiguracije\n"
"hard diska, postoji nekoliko mogu�nosti:\n"
"\n"
"* Koristite postoje�e particije: �arobnjak je detektovao jednu ili vi�e "
"postoje�ihLinux particija na va�em hard disku. Ukoliko\n"
"  �elite da ih zadr�ite, izaberite ovu opciju.\n"
"\n"
"\n"
"* Brisanje celog diska: ukoliko �elite da izbri�ete sve podatke i sve "
"particije koji postoje na va�em hard disku i zamenite ih va�im\n"
"  novim Mandrake Linux sistemom, mo�ete da izaberete ovu ociju. Budite "
"pa�ljivisa ovom opcijom, jer ne�ete biti u mogu�nosti\n"
"  da povratite staro stanje nakon potvrde.\n"
"\n"
"\n"
"* Koristite slobodan prostor na Windows particiji: ukoliko je Microsoft "
"Windowsinstaliran na hard disku i zauzima\n"
"  sav prostor, morate da kreirate slobodan prostor za Linux. Da bi to "
"uradili morate izbrisati\n"
"  Microsoft Windows particiju i podatke (pogledaj \"Brisanje celog diska\" "
"ili \"Ekspertni mod\" re�enja) ili da promenite veli�inu\n"
"  Microsoft Windows particije. Taj postupak se mo�e izvesti bez "
"gubljenjapodataka. Ovo re�enje se preporu�uje\n"
"  ukoliko �elite da koristite Mandrake Linux i Microsoft Windows naistom "
"kompjuteru.\n"
"\n"
"\n"
"  Pre nego izaberete ovu opciju, morate znati da �e veli�inaMicrosoft\n"
"  Windows particije biti manja nego �to je sada. To zna�i da�ete imati manje "
"prostora pod\n"
"  Microsoft Windows-om za podatke ili instalaciju novog softvera.\n"
"\n"
"\n"
"* Ekspertni mod: ukoliko �elite da ru�no particionirate hard disk, mo�eteda "
"izaberete ovu opciju. Budite pa�ljivi pre nego\n"
"  izaberete ovu pociju. �er je ovo dobra ali i opasna stvar. Mo�etelako "
"izgubiti sve podatke. Dakle,\n"
"  nemojte birati ovu opciju ukoliko ne znate �ta radite."

#: ../../help.pm_.c:319
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:350
#, fuzzy
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""
"Svaka particija koja je novodefinisana mora biti\n"
"formatirana za uptrebu (formatiranje zna�i kreiranje datote�nog(fajl) "
"sistema).\n"
"\n"
"\n"
"Sada mo�da �elite da reformatirate postoje�e particije da bi izbrisali\n"
"podatke koje sadr�e. Ukoliko �elite to, izaberite particije \n"
"koje �elite da formatizujete.\n"
"\n"
"\n"
"Zapamtite da nije potrebno da reformatirate sve postoje�e particije.\n"
"Morate da reformatirate particije koje sadr�e operativni sistem (kao �to su "
"\"/\",\n"
"\"/usr\" ili  \"/var\") ali ne morate da reformatirate particije koje sadr�e "
"podatke\n"
"koje �elite da zadr�ite (obi�no /home).\n"
"\n"
"\n"
"Pazite pri biranju particija, posle formatiranja, sv podaci �e \n"
"biti izbrisani i ne�ete ih mo�i povratiti.\n"
"\n"
"\n"
"Kliknite na \"U redu\" kada budete spreni za formatiranje particija.\n"
"\n"
"\n"
"Kliknite na  \"Poni�ti\" ukoliko �elite da izabereete druge particije za "
"instalaciju novog\n"
"Mandrake Linux operativnog sistema."

#: ../../help.pm_.c:376
#, fuzzy
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""
"Va� novi Mandrake Linux operativni sistem se trenutno\n"
"instalira. Ova operacija bi trebala da potraje nekoliko minuta (u zavisnosti "
"od veli�ine\n"
"paketa koji se instaliraju i brzine va�eg kompjutera).\n"
"\n"
"\n"
"Molim Vas za strpljenje.Hvala."

#: ../../help.pm_.c:384
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""

#: ../../help.pm_.c:391
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:401
#, fuzzy
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Reload\": you can use this option if you wish to undo all changes and\n"
"load your initial partitions table.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition "
"your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Restore from floppy\": this option will allow you to restore a\n"
"previously saved partition table from floppy disk.\n"
"\n"
" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
"later partition-table recovery if necessary. It is strongly recommended to\n"
"perform this step.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Na ovoj ta�ki, morate izbrati koju\n"
"particiju(e) �elite da koristite za instalaciju novog Mandrake Linux "
"sistema. Ukoliko su particije\n"
"ve� definisane (od predhodne instalacije ili od strane\n"
"drugog alata za particije), mo�ete da koristite postoje�e particije. U "
"drugim slu�ajevima,\n"
"hard disk particije moraju biti definisane.\n"
"\n"
"\n"
"Da bi kreirali particije, morate prvo izabrati hard disk. Mo�ete izabrati "
"pravi\n"
"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
"\n"
"\n"
"Za particioniranje selektovanog hard diska, mo�ete koristiti slede�e "
"opcije:\n"
"\n"
"   * O�isti sve: ova opcija bri�e sve particije na izabranom hard disku.\n"
"\n"
"\n"
"   * Auto alociranje:: ova opcija dozvoljava da automatski kreirate  Ext2 i "
"swap particije na slobodnom prostoru \n"
"     hard diska.\n"
"\n"
"\n"
"   * Spasi tabelu particija: ukoliko je va�a tabela particija o�te�ena, "
"mo�ete da probate da je oporavite koriste�i ovu opciju. Budite\n"
"     pa�ljivi i znajte da mo�e da i ne uspe.\n"
"\n"
"\n"
"   * Vrati na staro: ova opcija �e poni�titi izmenu.\n"
"\n"
"\n"
"   * Ponovno u�itavanje: ovu opciju mo�ete koristiti ukoliko �elite da "
"poni�titisve promene i u�itate inicijalnu tabelu particija\n"
"\n"
"\n"
"   * �arobnjak: ukoliko �elite da koristite �arobnjaka za particioniranje "
"hard diska, izaberite ovu opciju. Preporu�ena je ukoiko\n"
"     nemate mnogo znanja o partcijama.\n"
"\n"
"\n"
"   * Povrati sa diskete: ukoliko ste snimili tabelu particija na disketu  "
"tokom prethodne instalacije, mo�ete je\n"
"     vratiti sa ovom opcijom.\n"
"\n"
"\n"
"   * Snimi na disketu: ukoliko �elite da da snimite tabelu particija na "
"disketu da bi mogli kasnije da je povratite, mo�ete da iskoristite\n"
"     ovu opciju. Naro�ito preporu�ujemo ovu opciju\n"
"\n"
"\n"
"   * Ura�eno: kada zavr�ite sa particioniranjem hard diska, iskoristite ovu "
"opciju da bi snimili promene.\n"
"\n"
"\n"
"Za vi�e informacija, mo�ete za svaku ocpiju  dobiti kretanjem pomo�u "
"tastature: navigacijom kroz particije pomo�u Tab tastera i Up/Down "
"strelica.\n"
"\n"
"\n"
"Kada je particija izabrana, mo�ete koristiti:\n"
"\n"
"           * Ctrl-c za kreiranje nove particije (kada je izabrana prazna "
"particija)\n"
"\n"
"           * Ctrl-d za brisanje particije\n"
"\n"
"           * Ctrl-m za postavljanje ta�ke montiranja           \n"
"\n"
"           \n"
"Ukoliko radite instalaciju na PPC Ma�inu, mo�da �ete �eleti da kreirate malu "
"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo ve�om, "
"na primer50MB, mo�ete iskoristiti taj prostor za sme�tanje \n"
"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."

#: ../../help.pm_.c:460
#, fuzzy
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Jedna ili vi�e Microsoft Windows particija je detektovano \n"
"na hard disku. Izaberite koju od njih �elite da smanjite da bi instalirali\n"
"novi Mandrake Linux operativni sistem.\n"
"\n"
"\n"
"Informacija: svaka particija je ispisana na slede�i na�in: \"Ime Linux-a\", "
"\"Ime\n"
"Windows-a\" \"Kapacitet\".\n"
"\n"
"\"Ime Linux-a\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj "
"hard diska\",\n"
"\"broj particije\" (na primer, \"hda1\").\n"
"\n"
"\n"
"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID ure�aj i \"sd\"\n"
"ukoliko je SCSI hard disk.\n"
"\n"
"\n"
"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
"diskovima:\n"
"\n"
"   * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
"\n"
"   * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
"\n"
"   * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
"\n"
"   * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
"\n"
"\n"
"Sa SCSI hard diskovima, a \"a\" zna�i \"primarni hard disk\", a \"b\" zna�i "
"\"sekundarni hard disk \", itd.\n"
"\n"
"\n"
"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi diskdisk\n"
"ili particija se zove \"C:\")."

#: ../../help.pm_.c:491
msgid "Please be patient. This operation can take several minutes."
msgstr "Budite strpljivi.Trajanje ovih oeracija mo�e biti nekoliko minuta"

#: ../../help.pm_.c:494
#, fuzzy
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
"existing system.\n"
"\n"
"Please choose \"Install\" if there are no previous version of Mandrake\n"
"Linux installed or if you wish to boot between various operating systems.\n"
"\n"
"Please choose \"Update\" if you wish to update or repair an already\n"
"installed version of Mandrake Linux.\n"
"\n"
"Depending on your knowledge of GNU/Linux, please choose one of the\n"
"following to install or update your Mandrake Linux operating system:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""
"Izaberite  \"Instalacija\" ukoliko nema prethodne verzijeMandrake Linux\n"
"koja je instalirana ili ho�ete da koristite vi�e operativnih sistema.\n"
"\n"
"\n"
"Izaberite \"A�uriranje\" ukoliko �elite da a�urirate postoje�u verziju "
"Mandrake Linux-a.\n"
"\n"
"\n"
"U zavisnosti od va�eg poznavanja GNU/Linux-a, mo�ete izabrati jednu od "
"slede�ih nivoa za instalaciju ili a�uriranje\n"
"Mandrake Linux operativnog sistema:\n"
"\n"
"* Preporu�eno: ukoliko niakada niste instalirali  GNU/Linux operativni "
"sistem izaberite ovo. Instalacija �e biti\n"
"  veoma laka i ima�ete da odgovorite na svega nekoliko pitanja.\n"
"\n"
"\n"
"* Sa pode�avanjem(Customized): ukoiko vam je poznat GNU/Linux, mo�ete "
"izabrati primarnu namenu za koju koistite operativni sistem (radna stanica, "
"server,\n"
"  razvojna stanica). Mora�ete da odgovorite na vi�e pitanja nego uthan in "
"\"Preporu�eno\" instalacionoj\n"
"  klasi, tako da morate da bolje poznajete kako radi GNU/Linux da bi "
"izabrali ovuinstalacionu klasu.\n"
"\n"
"\n"
"* Ekspert: ukoliko iamte dobro znanje o GNU/Linux-u, mo�ete izabrati ovu "
"instalacionu klasu. Kao i \"Sa pode�avanjem\"\n"
"  instalacionoj klasi, mo�i �ete da birate primarnu namenu (radna stanica, "
"server, razvojna stanica). Budite veoma\n"
"  pa�ljivi pre izbora ove instalacione klase. Mo�i �ete da izvodite veoma "
"podesivu instalaciju.\n"
"  Odgovori na neka pitanja mogu biti veoma te�ki ukoliko nemate dobro znanje "
"o GNU/Linux-u. Dakle, nemojte birati \n"
"  ovu instalacionu kasu ukoliko ne znate �ta radite."

#: ../../help.pm_.c:521
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""

#: ../../help.pm_.c:534
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""

#: ../../help.pm_.c:547
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"RETURN to \"Cancel\" and choose again."
msgstr ""

#: ../../help.pm_.c:560
#, fuzzy
msgid ""
"Please select the correct port. For example, the COM1 port under MS Windows\n"
"is named ttyS0 under GNU/Linux."
msgstr ""
"Molim, izaberite odgovaraju�i port. Na primer, COM1 port\n"
"pod  MS Windows-om u Linux-u ima oznaku ttyS0."

#: ../../help.pm_.c:564
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:600
msgid ""
"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
"boot\n"
"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"GRUB\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu "
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"Mandrake Linux installs its own boot loader, which will let you boot either\n"
"GNU/Linux or any other operating systems which you have on your system.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Double-clicking on an existing entry allows you to change\n"
"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
"on to the next installation step."
msgstr ""

#: ../../help.pm_.c:647
#, fuzzy
msgid ""
"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (the LInux LOader) i  Grub su starteri: oni omogu�avaju da startate \n"
"ili  Linux ili bilo koji  drugi  operativni sistem prisutan na va�em "
"kompjuteru.\n"
"Naravno, ovi drugi operativni sistemi su ispravno detektovani i "
"instalirani. \n"
"Ukoliko to nije tako,mo�ete to sami urediti ovde.Pazite kada unosite\n"
"parametre\n"
"\n"
"\n"
"Tako�e,mo�ete �eleti da ostalim operat.sistemima onemogu�ite da pristupe "
"drugi \n"
"U tom slu�aju, treba da izbri�ete odgovaraju�e linije za te sisteme. Ali\n"
"onda morate imati boot diskete da bi ih startali !"

#: ../../help.pm_.c:658
#, fuzzy
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"Morate ozna�iti gde �elite da postavite\n"
"podatke potrebne za podizanje Linux-a.\n"
"\n"
"\n"
"Ukoliko neznate ta�no �ta radite,izaberite \"Prvi sektor\n"
"diska (MBR)\"."

#: ../../help.pm_.c:665
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
"a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""

#: ../../help.pm_.c:693
#, fuzzy
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting information on your\n"
"hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""
"DrakX �e potra�iti  PCI SCSI adapter(e).\n"
"Ukoliko DrakX prona�e SCSI adapter(e) i bude znao koji upravlja�ki program "
"(drajver) koristion �e ga(ih) automatski instalirati.\n"
"\n"
"\n"
"Ukoliko nemate SCSI adapter, ili imate ISA SCSI adapter, ili  a\n"
"PCI SCSI adapter koji DrakX ne mo�e da prepozna on �e vas pitati\n"
"da li imate SCSI adapter u  ma�ini. Ukoliko nemate adapter\n"
"samo kliknite na  'Ne'. Ukoliko kliknete na  'Da' pojavi�e se lista "
"drajvera\n"
"iz koje mo�ete odabrati odgovaraju�i za va� adapter.\n"
"\n"
"\n"
"Ukoliko morate ru�no da specificirate va� adapter, DrakX �e\n"
"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
"ispita adapter radi tih opcija. Ovo obi�no i uspe.\n"
"\n"
"\n"
"Ukoliko ne, mora�ete da sami odredite opcije za drajver.\n"
"Pogledajte i Instalacioni vodi� za dodatna obja�njenja ili\n"
"iskorisitite svoju Windows instalaciju (ukoliko je imate na sistemu),\n"
"dokumenatciju o hardveru, ili sa proizvo�a�evog \n"
"veb sajta (ukoliko imate pristup internetu)."

#: ../../help.pm_.c:720
#, fuzzy
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot "
"prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr ""
"Mo�ete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
"alternativne kernele, ili za emergency boot image.\n"
"\n"
"\n"
"Za druge OS-ove - unos sadr�i samo oznaku i  root particiju.\n"
"\n"
"\n"
"Za Linux, postoji nekoliko mogu�nosti: \n"
"\n"
"\n"
"  - Oznaka: Ovo je jednostavno ime koje �ete ukucati pri yaboot promptu da "
"bi izabrali ovu \n"
"startnu opciju.\n"
"\n"
"\n"
"  - Image: Ovo je ime kernela koji se startuje.  Obi�no vmlinux ili \n"
"varijacija vmlinux sa ekstenzijom.\n"
"\n"
"\n"
"  - Root: root ure�aj ili '/' za va�u Linux instalaciju.\n"
"\n"
"\n"
"  \n"
"  - Dodatak: Na Apple hardveru, kernelova opcija se koristi za prili�no "
"�esto da\n"
"asistira inicijalizaciju video hardvera, ili da omogu�i emulaciju tastera za "
"mi� na tastaturi zbog \n"
"�estog nedostatka drugog i tre�eg tastera na Apple mi�evima.  Sledi par \n"
"primera:\n"
"\n"
"\n"
"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
"\n"
"\n"
" \n"
"  - Initrd: Ova opcija se mo�e koristiti ili za podizanje inicijalnih "
"modula, pre nego je boot \n"
"ure�aj dostupan, ili za podizanje ramdisk image za startanje u "
"hitnimsituacijama.\n"
"\n"
"\n"
"  - Initrd-veli�ina: veli�ina default ramdisk je generalno 4096 bajta.  "
"Ukoliko vam treba\n"
"alociranje velikog ramdisk-a, ova opcija mo�e biti korisna.\n"
"\n"
"\n"
"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-"
"only, da bi omogu�ila\n"
"proveru datote�nog sistema pre nego sistem postane 'aktivan'.  Ovde mo�ete "
"poni�titi ovu opciju.\n"
"\n"
"\n"
"  - NoVideo: Ukoliko se Apple video hardver poka�e veoma problemati�nim, "
"mo�ete\n"
"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom "
"framebuffer podr�kom.\n"
"\n"
"\n"
"  - Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
"pritisnete ENTER pri yaboot promptu.  Ovaj unos �e tako�e biti dodatno "
"ozna�en sa '*', ukoliko\n"
"pritisnete TAB da bi videli startnu selekciju."

#: ../../help.pm_.c:765
#, fuzzy
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required "
"to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot je starter NewWorld MacIntosh hardver. On mo�e da pokrene\n"
"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na va�oj ma�ini.\n"
"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
"instalirani. Ukoliko to nije slu�aj, mo�ete ru�no dodati unos na ovom\n"
"ekranu. Budite pa�ljivi pri izboru parametara.\n"
"\n"
"\n"
"Osnovne opcije Yaboot-a su:\n"
"\n"
"\n"
"  - Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre "
"statrtnog\n"
"prompta.\n"
"\n"
"\n"
"  - Boot ure�aj: Ukazuje gde �elite da smestite informaciju potrebnu za \n"
"startanje GNU/Linux-a. Generalno gledano, mora�ete da podesite bootstrap "
"particiju pre \n"
"nego podesite ovu informaciju.\n"
"\n"
"\n"
"  - Omogu�a Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu mo�ete \n"
"birati izme�u CD-a, OF starta, MacOS, ili Linux-a.\n"
"\n"
"\n"
"  - Pauza pri startanju kernela: Ova pauza je sli�na pauzi kod LILO "
"startera.  Nakon \n"
"izbora Linux-a, ima�ete pauzu od 0.1 sekunde pre nego �to se selektuje\n"
"default opis kernela.\n"
"\n"
"\n"
"  - Omogu�i startanje CD-a ?: Ukoliko ozna�ite ovu opciju mo�i �ete da "
"izaberete 'C' za CD pri\n"
"prvom startnom promptu.\n"
"\n"
"\n"
"  - Omogu�i OF startanje?: Ukoliko ozna�ite ovu opciju mo�i �ete da "
"izaberete 'N' za Open\n"
"Firmware pri prvom startnom promptu.\n"
"\n"
"\n"
"  - Default OS: Mo�ete da izaberete koji operativni sistem �e biti pokretan "
"kao default kada Open Firmware \n"
"pauza zavr�i."

#: ../../help.pm_.c:798
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
"button to change it if necessary.\n"
"\n"
" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
"click on the button to change that if necessary.\n"
"\n"
" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
"the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:827
#, fuzzy
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"Izaberite hard disk koji �elite da izbri�ete da bi instalirali \n"
"novu Mandrake Linux particiju. Budite pa�ljivi, svi podaci na njemu �e biti "
"izgubljeni\n"
"i ne�e se mo�i povratiti."

#: ../../help.pm_.c:832
#, fuzzy
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Kliknite na \"U redu\" ukoliko �elite da izbri�ete sve podatke i \n"
"particije na ovom hard disku.Budite pa�ljivi, psle klika na \"U redu\", vi\n"
"ne�ete mo�i da povratite bilo kojipodata ili particiju na hard disku,\n"
"pa i bilo koje Windows podatke.\n"
"\n"
"\n"
"Kliknite na \"Poni�ti\" da bi poni�ti ovu operaciju bez gubljenja podataka "
"i\n"
"particija koje su prisutne na ovom hard disku."

#: ../../install2.pm_.c:114
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is missing)"
msgstr ""

#: ../../install_any.pm_.c:421
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Vi ste izabrali sledegje servere: %s\n"
"\n"
"\n"
"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
"sigurnosnih\n"
"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
"ih a�urirati\n"
"�to je pre mogugje.\n"
"\n"
"\n"
"Da li zaista �elite da instalirate ove servise?\n"

#: ../../install_any.pm_.c:457
msgid "Can't use broadcast with no NIS domain"
msgstr "Nije mogu� prenos bez NIS domena"

#: ../../install_any.pm_.c:793
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Ubacite FAT formatiranu praznu disketu u ure�aj %s"

#: ../../install_any.pm_.c:797
msgid "This floppy is not FAT formatted"
msgstr "Ova disketa nije formatirana sa FAT sistemom"

#: ../../install_any.pm_.c:809
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Da bi koristili ovaj izbor za �uvanje selekcije paketa, izaberite "
"instalaciju sa ``linux defcfg=floppy''"

#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
#, c-format
msgid "Error reading file %s"
msgstr "Gre�ka kod otvaranja datoteka %s"

#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
msgid "Ok"
msgstr "U redu"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Neke hardverske komponente u va�em ra�unaru zahtevaju odgovaraju�e drajvere "
"da bi normalno funkcionisale.\n"
"Informacije o njima mo�ete prona�i na: %s"

#: ../../install_interactive.pm_.c:44
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Morate imati  root particiju.\n"
"Za ovo, kreirajte particiju (ili kliknite na postoje�u).\n"
"Zatim izaberite \"Ta�ka montiranja\" i podesite na `/'"

#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "Morate imati swap particiju"

#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Hm, nema swap particije\n"
"\n"
"Svejedno nastaviti dalje ?"

#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Morate imati FAT particiju montiranu u /boot/efi"

#: ../../install_interactive.pm_.c:76
msgid "Use free space"
msgstr "Koristi slobodan prostor"

#: ../../install_interactive.pm_.c:78
msgid "Not enough free space to allocate new partitions"
msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"

#: ../../install_interactive.pm_.c:86
msgid "Use existing partition"
msgstr "Koristi postoje�u particiju"

#: ../../install_interactive.pm_.c:88
msgid "There is no existing partition to use"
msgstr "Nema ni jedne pariticije za rad"

#: ../../install_interactive.pm_.c:95
msgid "Use the Windows partition for loopback"
msgstr "Koristi Windows particiju za loopback"

#: ../../install_interactive.pm_.c:98
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Koju particiju �elite da korisite za Linux4Win?"

#: ../../install_interactive.pm_.c:100
msgid "Choose the sizes"
msgstr "Izaberite veli�inu"

#: ../../install_interactive.pm_.c:101
msgid "Root partition size in MB: "
msgstr "Veli�ina Root particije u MB:"

#: ../../install_interactive.pm_.c:102
msgid "Swap partition size in MB: "
msgstr "Veli�ina Swap particije u MB:"

#: ../../install_interactive.pm_.c:111
msgid "Use the free space on the Windows partition"
msgstr "Korisiti slobodan prostor na Windows particiji"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to resize?"
msgstr "Kojoj particiji  �elite da promenite veli�inu?"

#: ../../install_interactive.pm_.c:116
msgid "Computing Windows filesystem bounds"
msgstr "Prora�unavam granice Windows fajl-sistema"

#: ../../install_interactive.pm_.c:119
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Program za promenu veli�ine FAT paritcija ne mo�e da upravlja va�om "
"particijom, \n"
"zbog slede�e gre�ke: %s"

#: ../../install_interactive.pm_.c:122
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr ""
"Va�a Windows particija je previ�e fragmentirana, prvo pokrenite ``defrag''"

#: ../../install_interactive.pm_.c:123
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"PA�NJA !\n"
"\n"
"DrakX treba da izmeni veli�inu Windows particije. Budite pa�ljivi: ova\n"
"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da iza�ete "
"iz instalacije,pokrenete pod Windows-om\n"
"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
"Ako ste sigurni, pritisnite Ok (U redu)."

#: ../../install_interactive.pm_.c:132
msgid "Which size do you want to keep for windows on"
msgstr "Koju veli�inu �elite da zadr�ite za prozore"

#: ../../install_interactive.pm_.c:133
#, c-format
msgid "partition %s"
msgstr "particija %s "

#: ../../install_interactive.pm_.c:139
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT izmena veli�ine neuspela: %s"

#: ../../install_interactive.pm_.c:154
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Ne postoje FAT particije kojima se mo�e promeniti veli�ina ili koje se mogu "
"korisititi za loopback (ili nema dovoljno slobodnog prostora)"

#: ../../install_interactive.pm_.c:160
msgid "Erase entire disk"
msgstr "Izbri�i celi disk"

#: ../../install_interactive.pm_.c:160
msgid "Remove Windows(TM)"
msgstr "Ukloni Windows(TM)"

#: ../../install_interactive.pm_.c:163
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Imate vi�e od jednog hard diska, na koji od njih �elite da instalirate "
"Linux ?"

#: ../../install_interactive.pm_.c:166
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "SVE postoje�e particije i podaci na disku %s �e biti izgubljeni"

#: ../../install_interactive.pm_.c:174
msgid "Custom disk partitioning"
msgstr "Custom disk particioniranje"

#: ../../install_interactive.pm_.c:178
msgid "Use fdisk"
msgstr "Koristi fdisk"

#: ../../install_interactive.pm_.c:181
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Sada mo�ete particionirati va� %s hard disk ure�aj\n"
"Kada zavr�ite,ne zaboravite da potvrdite koriste�i `w'"

#: ../../install_interactive.pm_.c:210
msgid "You don't have enough free space on your Windows partition"
msgstr "Nemate dovoljno slobodnog prostora na Windows particiji"

#: ../../install_interactive.pm_.c:226
msgid "I can't find any room for installing"
msgstr "Ne mogu da prona�em slobodan prostor za instaliranje"

#: ../../install_interactive.pm_.c:230
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX �arobnjak za particioniranje je prona�ao slede�a re�enja:"

#: ../../install_interactive.pm_.c:235
#, c-format
msgid "Partitioning failed: %s"
msgstr "Particioniranje nije uspelo : %s"

#: ../../install_interactive.pm_.c:241
msgid "Bringing up the network"
msgstr "Pristupam  mre�u"

#: ../../install_interactive.pm_.c:246
msgid "Bringing down the network"
msgstr "Odstupam od mre�e"

#: ../../install_steps.pm_.c:73
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Gre�ka, ali neznam kako da je razre�im.\n"
"Nastavite na va� rizik!"

#: ../../install_steps.pm_.c:207
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duplirana ta�ka montiranja %s"

#: ../../install_steps.pm_.c:384
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Neki va�ni paketi nisu dobro instalirani.\n"
"Va� cdrom ure�aj ili cd su neispravni.\n"
"Proverite cdrom na instaliranom kompjuteru koriste�e \"rpm -qpl Mandrake/"
"RPMS/*.rpm\"\n"

#: ../../install_steps.pm_.c:459
#, c-format
msgid "Welcome to %s"
msgstr "Dobro�li u  %s"

#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
msgid "No floppy drive available"
msgstr "Nepristupa�an disketni ure�aj"

#: ../../install_steps_auto_install.pm_.c:77
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "Pokre�em korak `%s'\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "Izaberite veli�inu komponenti za instalaciju"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "Ukupna veli�ina: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
#, c-format
msgid "Version: %s\n"
msgstr "Verzija: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
#, c-format
msgid "Size: %d KB\n"
msgstr "Veli�ina: %d KB\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
#: ../../install_steps_interactive.pm_.c:509
msgid "Choose the packages you want to install"
msgstr "Izaberi pakete za instalaciju"

#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
msgid "Info"
msgstr "Info"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
#: ../../install_steps_interactive.pm_.c:212
msgid "Install"
msgstr "Instaliraj"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
#: ../../install_steps_interactive.pm_.c:695
msgid "Installing"
msgstr "Instaliram"

#: ../../install_steps_graphical.pm_.c:499
msgid "Please wait, "
msgstr "Molim sa�ekajte"

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
msgid "Time remaining "
msgstr "Preostalo vreme"

#: ../../install_steps_graphical.pm_.c:502
msgid "Total time "
msgstr "Ukupno vreme"

#: ../../install_steps_graphical.pm_.c:507
#: ../../install_steps_interactive.pm_.c:695
msgid "Preparing installation"
msgstr "Pripremam instalaciju"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
#, c-format
msgid "Installing package %s"
msgstr "Instaliram paket %s"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
#: ../../install_steps_gtk.pm_.c:646
msgid "Go on anyway?"
msgstr "Svejedno nastaviti dalje ?"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
msgid "There was an error ordering packages:"
msgstr "Gre�ka u listi paketa:"

#: ../../install_steps_graphical.pm_.c:577
msgid "Use existing configuration for X11?"
msgstr "Da li da koristim postoje�u konfiguraciju za X11 ?"

#: ../../install_steps_gtk.pm_.c:148
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Va� sistem ima manjak snage. Usled toga mo�ete imati problema pri "
"instalaciji\n"
"Mandrake Linux. Ukoliko se oni pojave, mo�ete probati tekstualnu "
"instalaciju. Da bi to postigli,\n"
"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."

#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
msgid "Install Class"
msgstr "Instalacione klase"

#: ../../install_steps_gtk.pm_.c:162
msgid "Please, choose one of the following classes of installation:"
msgstr "Molim vas da izabeterte jednu od slede�ih instalacionih klasa:"

#: ../../install_steps_gtk.pm_.c:228
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "Ukupna veli�ina grupa koje ste izabrali iznosi  %d MB.\n"

#: ../../install_steps_gtk.pm_.c:230
#, c-format
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"Ukoliko �elite da instalirate manje,\n"
"izaberite procentualno broj paketa koje �elite da instalirate.\n"
"\n"
"Pri malom procentu �e se instalirati samo va�ni paketi;\n"
"dok �e pri procentu od 100%% biti instalirani svi paketi."

#: ../../install_steps_gtk.pm_.c:235
#, c-format
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"Na va�em disku ima mesta samo za %d%% ovih paketa.\n"
"\n"
"Ukoliko �elite da instalirate manje od ovoga,\n"
"izaberite procentualno broj paketa koje �elite da instalirate.\n"
"Pri malom procentu �e se instalirati samo va�ni paketi;\n"
"dok �e pri procentu od  %d%% biti instalirano maksimalno mogu� broj paketa"

#: ../../install_steps_gtk.pm_.c:241
msgid "You will be able to choose them more specifically in the next step."
msgstr "Mo�i �ete da ih preciznije birate u slede�em koraku."

#: ../../install_steps_gtk.pm_.c:243
msgid "Percentage of packages to install"
msgstr "Procenat paketa za instalaciju"

#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
msgid "Package Group Selection"
msgstr "Odabir grupa paketa"

#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
msgid "Individual package selection"
msgstr "Pojedina�no biranje paketa"

#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukupna veli�ina: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:385
msgid "Bad package"
msgstr "Lo� paket"

#: ../../install_steps_gtk.pm_.c:386
#, c-format
msgid "Name: %s\n"
msgstr "Ime: %s\n"

#: ../../install_steps_gtk.pm_.c:389
#, c-format
msgid "Importance: %s\n"
msgstr "Va�no: %s\n"

#: ../../install_steps_gtk.pm_.c:411
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Ne mo�ete selektovati ovaj paket jer nema vi�e slobodnog prostora"

#: ../../install_steps_gtk.pm_.c:416
msgid "The following packages are going to be installed"
msgstr "Slede�i paketi treba da budu instalirani"

#: ../../install_steps_gtk.pm_.c:417
msgid "The following packages are going to be removed"
msgstr "Slede�i paketi �e biti izbrisani"

#: ../../install_steps_gtk.pm_.c:429
msgid "You can't select/unselect this package"
msgstr "Ne mo�ete selektovati/deselektovati ovaj paket"

#: ../../install_steps_gtk.pm_.c:441
msgid "This is a mandatory package, it can't be unselected"
msgstr "Ovo je obavezni paket,i ne mo�e biti deselektovan"

#: ../../install_steps_gtk.pm_.c:443
msgid "You can't unselect this package. It is already installed"
msgstr "Mo�ete deselektovati ovaj paket jer je ve� instaliran"

#: ../../install_steps_gtk.pm_.c:447
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"Ovaj paket mora biti a�uriran\n"
"Da li sigurno �elite da ga deselektujete ?"

#: ../../install_steps_gtk.pm_.c:451
msgid "You can't unselect this package. It must be upgraded"
msgstr "Ne mo�ete deselektovati ovaj paket.On mora biti a�uriran"

#: ../../install_steps_gtk.pm_.c:456
msgid "Show automatically selected packages"
msgstr "Automatski prika�i izabrane pakete"

#: ../../install_steps_gtk.pm_.c:460
msgid "Load/Save on floppy"
msgstr "U�itaj/Snimi na disketu"

#: ../../install_steps_gtk.pm_.c:461
msgid "Updating package selection"
msgstr "A�uriranje selekcije paketa"

#: ../../install_steps_gtk.pm_.c:466
msgid "Minimal install"
msgstr "Minimalno instaliraj"

#: ../../install_steps_gtk.pm_.c:503
msgid "Estimating"
msgstr "Procenjujem"

#: ../../install_steps_gtk.pm_.c:522
msgid "Please wait, preparing installation"
msgstr "Samo momenat, pripremam instalaciju"

#: ../../install_steps_gtk.pm_.c:553
#, c-format
msgid "%d packages"
msgstr "%d paketa"

#: ../../install_steps_gtk.pm_.c:599
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Upozorenje !\n"
"\n"
"Pa�ljivo pro�itajte dole navedene uslove. Ukoliko se ne sla�ete sa bilo "
"kojim \n"
"delom, onda nemate odobrenje za instaliranje slede�eg CD-a. Pritisnite "
"'Odbijam' \n"
"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
"\n"
"\n"
"Neke komponente sadr�ane u slede�im CD medijama nisu pod\n"
"GPL Licencom ili sli�nim ugovorima. Svaka takva komponenta je onda "
"uslovljena\n"
"uslovima i ugovorima sopstevene lincence. \n"
"Pa�ljivo pro�itajte i upoznajte se sa takvim specifi�nim licencama pre \n"
"nego uotrebite ili redistribuirate pomenute komponente. \n"
"Takve licence �e u glavnom zabranjivati transfer, kopiranje \n"
"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
"Bilo koji deo ugovora koji nije ispo�tovan istovremeno uklanja i ostala va�a "
"prava\n"
"u datoj licenci. Ukoliko vam odre�ena licenca ne garantuje takva\n"
"prava, obi�no ne mo�ete instalirati programe na vi�e od jedanog\n"
"aiatema, ili ih prilagoditi da se mogu koristiti na mre�i. Ukoliko ste u "
"dilemi, molimo vas da direktno \n"
"kontaktirate distributera ili editora komponente. \n"
"Prenos na tre�e programe ili kopiranje takvih komponenti uklju�uju�i i\n"
"dokumentaciju je obi�no zabranjen.\n"
"\n"
"\n"
"Sva prava na komponente na slede�im CD medijama pripadaju njihovim \n"
"respektativnim autorima i za�ti�ene su zakonima o intelektuanoj svojini i \n"
"pravima koji se primenjuju na softverske programe.\n"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Accept"
msgstr "Prihvati"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Refuse"
msgstr "Odbaci"

#: ../../install_steps_gtk.pm_.c:628
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Promenite va� Cd-Rom!\n"
"\n"
"Ubacite va� CD ozna�en sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
"spremni.\n"
"Ukoliko ga nemate pritisnite  Poni�ti."

#: ../../install_steps_gtk.pm_.c:646
msgid "There was an error installing packages:"
msgstr "Gre�ka pri instalaciji paketa:"

#: ../../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "Xm,pojavila se  gre�ka"

#: ../../install_steps_interactive.pm_.c:71
msgid "License agreement"
msgstr "LIcencirani ugovor"

#: ../../install_steps_interactive.pm_.c:72
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Upoznavanje\n"
"\n"
"Operativni sistem i druge komponente dostupne u Mandrake Linux "
"distribuciji \n"
"na dalje �e biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
"uklju�uju, ali nisu i \n"
"ograni�eni na, skup programa, metoda, pravila i dokumentaciju koja je "
"vezanaza operativni \n"
"sistem i druge komponente Mandrake Linux distribucije.\n"
"\n"
"\n"
"1. Licencni ugovor\n"
"\n"
"Pa�ljivo pro�itajte ovaj dokument. Ovaj dokument je licencni ugovor "
"izme�uizme�u vas i   \n"
"MandrakeSoft S.A. koji pola�e pravo na Softverske Proizvode.\n"
"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
"vidu, vi eksplicitno \n"
"prihvatate i potpuno se sla�ete sa prihvatanjem postavki i uslova i stanja u "
"ovoj Licenci. \n"
"Ukoliko se ne sla�ete sa bilo kojim delom Licence, nemate pravo da "
"instalirate, kopirate ili koristite \n"
"Softverske proizvode. \n"
"Bilo koji poku�aj instalacije, dupliciranja ili upotrebe Softverskih "
"Proizvoda na na�in koji se ne sla�e sa \n"
"postavkama i uslovima ove Licence �e voditi gubitku va�ih prava pod ovom \n"
"Licencom. Na osnovu gubitka Licence, morate odmah uni�titisve kopije \n"
"Softverskih Proizvoda.\n"
"\n"
"\n"
"2. Ograni�ena Garancija\n"
"\n"
"Softverski Proizvodi i prate�a dokumentracija su omogu�ene \"kao takve\", i "
"bez garancije, do granica \n"
"koje su dozvoljene zakonom.\n"
"MandrakeSoft S.A. ne�e, u svim uslovima i u granicama zakona, biti ogovoran "
"za bilo koje specijalne,\n"
"slu�ajne, direktne ili indirektne �tete (uklju�uju�i neograni�ene�tete ili "
"gubitke \n"
"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tra�nje i "
"kazne koje su rezultat sudske \n"
"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
"nemogu�nosti kori��enja Softverskih \n"
"Proizvoda, �ak iako je MandrakeSoft S.A. savetovao i ukazivao na mogu�nost "
"pojave takve \n"
"�tete.\n"
"\n"
"Ograni�ena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
"softvera u nekim zemljama\n"
"\n"
"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
"distributeri ne�e, ni pod kojim uslovima, biti \n"
"odgovorni za specijalne, namerne direktne ili indirektne �tete(uklju�uju�i "
"neograni�ene \n"
"�tete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
"zakonske tra�nje \n"
"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
"proizilaze \n"
"iz upotrebe ili nemogu�nosti kori��enja Softverskih Komponenti ili koje "
"proizilaze download-ovanih softverskih komponenti \n"
"bilo kog Mandrake Linux sajta koji su zabranjeni ili ograni�eni u nekim "
"zemljama po lokalnim zakonima.\n"
"Ova ograni�ena prava se primenjuju, ali nisu i ograni�ena na,kriptografske "
"komponente \n"
"koje se nalaze u Softverskim Proizvodima.\n"
"\n"
"\n"
"3. GPL i za nju vezane Licence\n"
"\n"
"Softverski proizvodi se sastoje od komponenti kreiranih od strane razli�tih "
"lica ili entiteta. Ve�ina  \n"
"od ovih komponenti se nalaze pod postavkama i uslovima GNU Op�te Javne \n"
"Licence, koja se od sada zove  \"GPL\", ili sli�ne licence. Ve�ina ovih "
"licenci dozvoljava upotrebu, \n"
"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
"Molimo Vas da pa�ljivo pro�itte postavke \n"
"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
"komponenete. Bilo koje pitanje \n"
"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
"nena MandrakeSoft.\n"
"Programi koje je razvio MandrakeSoft S.A. podle�u pod GPL Licencu. "
"Dokumentacija pisana od \n"
"strane MandrakeSoft S.A. podle�e pod posebnu licencu. Molim da pogledate "
"dokumentaciju  \n"
"za detalje.\n"
"\n"
"\n"
"4. Prava na Intelektualnu svojinu\n"
"\n"
"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
"ona \n"
"su za�ti�ena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
"na softverske programe.\n"
"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
"SoftverskihProizvoda, kako za celinu tako i za \n"
"delove, za sve sve svrhe i sve upotrebe.\n"
"\"Mandrake\", \"Mandrake Linux\" i pridru�eni logotipi i oznake MandrakeSoft "
"S.A.  \n"
"\n"
"\n"
"5. Zakonska prava \n"
"\n"
"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
"odluke, ovaj \n"
"deo se isklju�uje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
"ovog\n"
"ugovora.\n"
"Postavke i uslovi ove Licence su odre�eni Zakonima Francuske.\n"
"Svi nesporazumi bi trebali biti re�eni van suda. Kao poslednje \n"
"sredstvo, nesporazumi �e biti upu�eni na odgovaraju�e Sudske ustanove u "
"Parizu - Francuska.\n"
"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
"MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:168
#: ../../install_steps_interactive.pm_.c:871
#: ../../standalone/keyboarddrake_.c:28
msgid "Keyboard"
msgstr "Tastatura"

#: ../../install_steps_interactive.pm_.c:169
#: ../../standalone/keyboarddrake_.c:29
msgid "Please, choose your keyboard layout."
msgstr "Koji  raspored tastature �elite ?"

#: ../../install_steps_interactive.pm_.c:170
msgid "Here is the full list of keyboards available"
msgstr "Ovde je predstavljena cela lista dostupnih tastatura"

#: ../../install_steps_interactive.pm_.c:187
msgid "Which installation class do you want?"
msgstr "Koju  instalacionu klasu birate ?"

#: ../../install_steps_interactive.pm_.c:189
msgid "Install/Update"
msgstr "Instalacija/A�uriranje"

#: ../../install_steps_interactive.pm_.c:189
msgid "Is this an install or an update?"
msgstr "Da li je ovo instalacija ili a�uriranje ?"

#: ../../install_steps_interactive.pm_.c:198
msgid "Recommended"
msgstr "Preporu�eno"

#: ../../install_steps_interactive.pm_.c:201
#: ../../install_steps_interactive.pm_.c:204
msgid "Expert"
msgstr "Ekspert"

#: ../../install_steps_interactive.pm_.c:212
msgid "Update"
msgstr "A�uriranje"

#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
msgid "Please, choose the type of your mouse."
msgstr "Izaberite tip mi�a"

#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
msgid "Mouse Port"
msgstr "Port za mi�a"

#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Izaberite na koji serijski port je va� mi� priklju�en."

#: ../../install_steps_interactive.pm_.c:239
msgid "Buttons emulation"
msgstr "Emulacija tastera"

#: ../../install_steps_interactive.pm_.c:241
msgid "Button 2 Emulation"
msgstr "Emulacija 2 tastera"

#: ../../install_steps_interactive.pm_.c:242
msgid "Button 3 Emulation"
msgstr "Emulaci�a 3 tastera"

#: ../../install_steps_interactive.pm_.c:261
msgid "Configuring PCMCIA cards..."
msgstr "Konfiguri�em PCMCIA kartice..."

#: ../../install_steps_interactive.pm_.c:261
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:266
msgid "Configuring IDE"
msgstr "Konfiguracija  IDE"

#: ../../install_steps_interactive.pm_.c:266
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:281
msgid "no available partitions"
msgstr "nema dostupnih particija"

#: ../../install_steps_interactive.pm_.c:284
msgid "Scanning partitions to find mount points"
msgstr "Skeniranje particija za pronala�enje ta�ke montiranja"

#: ../../install_steps_interactive.pm_.c:292
msgid "Choose the mount points"
msgstr "Izaberite ta�ke montiranja"

#: ../../install_steps_interactive.pm_.c:311
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Ne mogu pro�itati tabelu particija, mnogo je iskvarena za mene :(\n"
"Poku�a�u dalje zaobilaze�i lo�e particijeMogu poku�ati da formatiram lo�e "
"particije (SVI PODACI �e biti izgubljeni !).\n"
"Drugo re�enje je da se DrakX onemogu�i da modufikuje tabelu particija.\n"
"(gre�ka je %s)\n"

#: ../../install_steps_interactive.pm_.c:324
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake ne mo�e da ispravno pro�ita tabelu particija.\n"
"Dalji nastavak ide na va� rizik !"

#: ../../install_steps_interactive.pm_.c:340
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Nema slobodnog prostora za 1MB bootstrap! Instalacija gje se nastaviti, ali "
"da bi podigli va�sistem, moragjete da kreirate bootstrap particiju u "
"DiskDrake-u"

#: ../../install_steps_interactive.pm_.c:349
msgid "No root partition found to perform an upgrade"
msgstr "Nije root particije potrebne za a�uriranje"

#: ../../install_steps_interactive.pm_.c:350
msgid "Root Partition"
msgstr "Root particija"

#: ../../install_steps_interactive.pm_.c:351
msgid "What is the root partition (/) of your system?"
msgstr "Na kojoj particiji je root particija (/) va�eg sistema?"

#: ../../install_steps_interactive.pm_.c:365
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Treba da resetujete ma�inu za primenu izmena u tabeli particija"

#: ../../install_steps_interactive.pm_.c:389
msgid "Choose the partitions you want to format"
msgstr "Izaberi particije za formatiranje"

#: ../../install_steps_interactive.pm_.c:390
msgid "Check bad blocks?"
msgstr "Proveri lo�e blokove ?"

#: ../../install_steps_interactive.pm_.c:416
msgid "Formatting partitions"
msgstr "Formatiranje particiju"

#: ../../install_steps_interactive.pm_.c:418
#, c-format
msgid "Creating and formatting file %s"
msgstr "Kreiranje i formatiranje datoteke %s"

#: ../../install_steps_interactive.pm_.c:421
msgid "Not enough swap to fulfill installation, please add some"
msgstr "Nema dovoljno swap-a da zavr�i instalaciju, dodajte jo� swap-a"

#: ../../install_steps_interactive.pm_.c:427
msgid "Looking for available packages"
msgstr "Tra�im pakete"

#: ../../install_steps_interactive.pm_.c:433
msgid "Finding packages to upgrade"
msgstr "Tra�im pakete za a�uriranje..."

#: ../../install_steps_interactive.pm_.c:450
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr "Va� sistem nema dovoljno mesta za instalaciju ili a�uriranje (%d > %d)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Complete (%dMB)"
msgstr "Kompletna (%dMB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Minimum (%dMB)"
msgstr "Minimalna (%dMB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Recommended (%dMB)"
msgstr "Preporu�ena (%dMB)"

#: ../../install_steps_interactive.pm_.c:475
msgid "Custom"
msgstr "Izbor po �elji"

#: ../../install_steps_interactive.pm_.c:522
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Molim Vas da izaberete u�itavanje ili snimanje selekcije paketa na disketu.\n"
"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."

#: ../../install_steps_interactive.pm_.c:525
msgid "Load from floppy"
msgstr "U�itaj sa diskete"

#: ../../install_steps_interactive.pm_.c:527
msgid "Loading from floppy"
msgstr "U�itavam sa diskete"

#: ../../install_steps_interactive.pm_.c:527
msgid "Package selection"
msgstr "Odabir paketa"

#: ../../install_steps_interactive.pm_.c:532
msgid "Insert a floppy containing package selection"
msgstr "Ubacite disketu koja sadr�i selekciju paketa"

#: ../../install_steps_interactive.pm_.c:544
msgid "Save on floppy"
msgstr "Snimi na disketu"

#: ../../install_steps_interactive.pm_.c:605
msgid "Selected size is larger than available space"
msgstr "Selektovana veli�ina je vegja od slobodnog prostora"

#: ../../install_steps_interactive.pm_.c:670
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."

#: ../../install_steps_interactive.pm_.c:675
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom ozna�en kao \"%s"

#: ../../install_steps_interactive.pm_.c:704
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instaliram pakete %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:713
msgid "Post-install configuration"
msgstr "Postinstalaciona konfiguracija"

#: ../../install_steps_interactive.pm_.c:719
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Ubacite Boot disketu u ure�aj %s"

#: ../../install_steps_interactive.pm_.c:725
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Ubacite Update Modules disketu u ure�aj %s"

#: ../../install_steps_interactive.pm_.c:750
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Zbog razli�itih op�tix zahteva koji se odnose na ovaj  softver  kao i "
"izlo�enost\n"
"mnogim zakonodavstvima,kupac i/ili korisnik softvera treba\n"
"da proveri da li zakon omogu�ava  download i upotrebu softvera.\n"
"\n"
"Kupci  i korisnici treba da znaju da ne trebada izvrdavaju\n"
"zakon.Ukoliko se to  ipak desi, oni  �e snositi sankcije\n"
"\n"
"MandrakeSoft nije odgovoran za bilo kakve gubitke ili �tetekoje mogu nastati,"
"niti za sudske kazne koje se mogu javiti.\n"
"\n"
"\n"
"Za bilo kakva pitanja vezana za ovu temu kontaktirajte \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:782
msgid "Choose a mirror from which to get the packages"
msgstr "Izaberite mirror sa kog �ete skinuti pakete"

#: ../../install_steps_interactive.pm_.c:793
msgid "Contacting the mirror to get the list of available packages"
msgstr "Kantaktirajte mirror za listu mogu�ih paketa"

#: ../../install_steps_interactive.pm_.c:796
msgid "Please choose the packages you want to install."
msgstr "Izaberite pakete za instalaciju"

#: ../../install_steps_interactive.pm_.c:808
msgid "Which is your timezone?"
msgstr "Koja je va�a vremenska zona ?"

#: ../../install_steps_interactive.pm_.c:813
msgid "Hardware clock set to GMT"
msgstr "Va� sistemski (BIOS) �asovnik je pode�en na GMT"

#: ../../install_steps_interactive.pm_.c:814
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatska sinhronizacija vremena (preko NTP-a)"

#: ../../install_steps_interactive.pm_.c:821
msgid "NTP Server"
msgstr "NTP Server"

#: ../../install_steps_interactive.pm_.c:855
#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
msgid "Remote CUPS server"
msgstr "Udaljeni CUPS server"

#: ../../install_steps_interactive.pm_.c:856
msgid "No printer"
msgstr "Bez �tampa�a"

#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Sa�etak"

#: ../../install_steps_interactive.pm_.c:870
msgid "Mouse"
msgstr "Mi�"

#: ../../install_steps_interactive.pm_.c:872
msgid "Timezone"
msgstr "Vremenska zona"

#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
#: ../../printerdrake.pm_.c:1844
msgid "Printer"
msgstr "�tampa�"

#: ../../install_steps_interactive.pm_.c:875
msgid "ISDN card"
msgstr "ISDN kartica"

#: ../../install_steps_interactive.pm_.c:878
msgid "Sound card"
msgstr "Zvu�na kartica"

#: ../../install_steps_interactive.pm_.c:881
msgid "TV card"
msgstr "TV katica"

#: ../../install_steps_interactive.pm_.c:917
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:945
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm_.c:918
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:954
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:919
#: ../../install_steps_interactive.pm_.c:941
msgid "Local files"
msgstr "Lokalne datoteke"

#: ../../install_steps_interactive.pm_.c:928
#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Unesi root lozinku"

#: ../../install_steps_interactive.pm_.c:930
msgid "No password"
msgstr "Bez lozinke"

#: ../../install_steps_interactive.pm_.c:935
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "Ova lozinka je suvi�e jednostavna (treba da ima bar %d znakova)"

#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
#: ../../standalone/draknet_.c:604
msgid "Authentication"
msgstr "Autentifikacija"

#: ../../install_steps_interactive.pm_.c:949
msgid "Authentication LDAP"
msgstr "LDAP Autentifikacija"

#: ../../install_steps_interactive.pm_.c:950
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: ../../install_steps_interactive.pm_.c:951
msgid "LDAP Server"
msgstr "LDAP Server"

#: ../../install_steps_interactive.pm_.c:957
msgid "Authentication NIS"
msgstr "NIS Autentifikacija"

#: ../../install_steps_interactive.pm_.c:958
msgid "NIS Domain"
msgstr "NIS Domen"

#: ../../install_steps_interactive.pm_.c:959
msgid "NIS Server"
msgstr "NIS Server"

#: ../../install_steps_interactive.pm_.c:994
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
"SILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni SILO, ili "
"SILO ne\n"
"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
"Ukoliko �elite da kreirate startnu disketu za va� sistemubacite disketu u "
"pogon i pritisnite \"Da\"."

#: ../../install_steps_interactive.pm_.c:1010
msgid "First floppy drive"
msgstr "Prvi flopi/disketni ure�aj "

#: ../../install_steps_interactive.pm_.c:1011
msgid "Second floppy drive"
msgstr "Drugi flopi/disketni ure�aj"

#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
msgid "Skip"
msgstr "Presko�i"

#: ../../install_steps_interactive.pm_.c:1017
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
"LILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni LILO, ili "
"LILO ne\n"
"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
"Da li biste da kreirate startnu disketu za va� sistem?"

#: ../../install_steps_interactive.pm_.c:1026
msgid "Sorry, no floppy drive available"
msgstr "Ti malera, nema diskete"

#: ../../install_steps_interactive.pm_.c:1030
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
"Izabrerite disketni ure�aj koji �ete koristiti  za kreiranje starne diskete"

#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Ubacite praznu disketu u ure�aj %s"

#: ../../install_steps_interactive.pm_.c:1037
msgid "Creating bootdisk"
msgstr "Kreiram startni disk..."

#: ../../install_steps_interactive.pm_.c:1044
msgid "Preparing bootloader"
msgstr "Pripremam starter..."

#: ../../install_steps_interactive.pm_.c:1055
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""
"Po�to izgleda da imate staromodnu ili nepoznatu \n"
" ma�inu, yaboot starter negje raditi kod vas.\n"
"Instalacija gje biti nastavljena, ali gjete morati da\n"
" BootX da bi podigli sistem"

#: ../../install_steps_interactive.pm_.c:1060
msgid "Do you want to use aboot?"
msgstr "Da li �elite da koristite aboot ?"

#: ../../install_steps_interactive.pm_.c:1063
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Gre�ka pri instalaciji aboot-a, \n"
"Da li da probam da instaliram �ak ako to vodi uni�tenju prve particije?"

#: ../../install_steps_interactive.pm_.c:1070
#, fuzzy
msgid "Installing bootloader"
msgstr "Instaliraj starter"

#: ../../install_steps_interactive.pm_.c:1076
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Instalacija startera neuspela. Gre�ka je:"

#: ../../install_steps_interactive.pm_.c:1084
#, fuzzy, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Mora�ete da promenite Open Firmware boot-ure�aj da \n"
" bi mogli da koristite starter.  Dr�ite Command-Option-O-F\n"
" pri startanju i unesite:\n"
" setenv boot-device $of_boot,\\\\:tbxi\n"
" Onda ukucajte: shut-down\n"
"Kada slede�i put startujete ma�inu trebali bi da vidite staterov prompt."

#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
msgid "Low"
msgstr "Mala"

#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
msgid "Medium"
msgstr "Srednja"

#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
msgid "High"
msgstr "Velika"

#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
msgid "Choose security level"
msgstr "Izaberite sigurnosni nivo"

#: ../../install_steps_interactive.pm_.c:1134
#: ../../standalone/drakautoinst_.c:80
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Ubacite praznu disketu u ure�aj %s"

#: ../../install_steps_interactive.pm_.c:1138
#: ../../standalone/drakautoinst_.c:82
msgid "Creating auto install floppy"
msgstr "Kreiram auto instalacioni flopi"

#: ../../install_steps_interactive.pm_.c:1149
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Neki koraci nisu kompletirani.\n"
"\n"
"Da li stvarno �elite da zavr�ite ?"

#: ../../install_steps_interactive.pm_.c:1160
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from http://www.mandrakelinux.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"�estitamo, instalacija je zavr�ena.\n"
"Izvadite disketu iz drajva i pritisnite <Enter> da se ra�unar resetuje.\n"
"\n"
"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
"Mandrake Linux Linux-a, pro�itajte deo 'Errata' koji mo�ete na�i na\n"
"http://www.mandrakelinux.com/.\n"
"\n"
"Informacije o konfigurisanju va�eg sistema mo�ete na�i u post-instalacionom\n"
"poglavlju zvani�nog Mandrake Linux 'Vodi�a za korisnike'."

#: ../../install_steps_interactive.pm_.c:1172
msgid "Generate auto install floppy"
msgstr "Kreiraj auto instalacionu disketu"

#: ../../install_steps_interactive.pm_.c:1174
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Auto instalacija mo�e biti potpuno automatizovana ukoliko �elite,\n"
"u tom slu�aju preuze�e kontrolu nad hard-diskom!!\n"
"(ovo se odnosi na instalaciju na drugoj ma�ini).\n"
"\n"
"Mo�da volite da ponovite instalaciju.\n"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Automated"
msgstr "Automatski"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Replay"
msgstr "Ponavljanje"

#: ../../install_steps_interactive.pm_.c:1182
msgid "Save packages selection"
msgstr "Sa�uvaj selekciju paketa"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux Instalacija %s"

#: ../../install_steps_newt.pm_.c:34
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"<Tab>/<Alt-Tab> kret. izme�u elemenata | <Space> izbor | <F12> slede�i ekran"

#: ../../interactive.pm_.c:73
msgid "kdesu missing"
msgstr "nedostaje kdesu"

#: ../../interactive.pm_.c:132
#, fuzzy
msgid "Choose a file"
msgstr "Izaberite akciju"

#: ../../interactive.pm_.c:284
msgid "Advanced"
msgstr "Napredno"

#: ../../interactive.pm_.c:345
msgid "Please wait"
msgstr "Samo momenat..."

#: ../../interactive_gtk.pm_.c:681
msgid "Expand Tree"
msgstr "Pro�iri stablo"

#: ../../interactive_gtk.pm_.c:682
msgid "Collapse Tree"
msgstr "Skupi stablo"

#: ../../interactive_gtk.pm_.c:683
msgid "Toggle between flat and group sorted"
msgstr "Birajte: ravno ili grupno sortirano"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Dvosmisleno (%s), budite precizniji\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "Lo� izbor, probajte ponovo\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (po default-u %s)"

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "Va� izbor ? (po default-u %s) "

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Va� izbor ? (po default-u %s unesi `none' za nijedan) "

#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
msgid "Czech (QWERTZ)"
msgstr "�e�ki (QWERTZ)"

#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
msgid "German"
msgstr "Nema�ki"

#: ../../keyboard.pm_.c:142
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
msgid "Spanish"
msgstr "�panski"

#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
msgid "Finnish"
msgstr "Finski"

#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
msgid "French"
msgstr "Francuski"

#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
msgid "Norwegian"
msgstr "Norve�ki"

#: ../../keyboard.pm_.c:147
msgid "Polish"
msgstr "Poljski"

#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
msgid "Russian"
msgstr "Ruski"

#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
msgid "Swedish"
msgstr "�vedski"

#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
msgid "UK keyboard"
msgstr "UK tastatura"

#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
msgid "US keyboard"
msgstr "US tastatura"

#: ../../keyboard.pm_.c:159
msgid "Albanian"
msgstr "Albanski"

#: ../../keyboard.pm_.c:160
msgid "Armenian (old)"
msgstr "Jermenski (stari)"

#: ../../keyboard.pm_.c:161
msgid "Armenian (typewriter)"
msgstr "Jermenski (typewriter)"

#: ../../keyboard.pm_.c:162
msgid "Armenian (phonetic)"
msgstr "Jermenski (fonetski)"

#: ../../keyboard.pm_.c:167
msgid "Azerbaidjani (latin)"
msgstr "Azerbejdzan  (latinica)"

#: ../../keyboard.pm_.c:169
msgid "Belgian"
msgstr "Belgijski"

#: ../../keyboard.pm_.c:170
msgid "Bulgarian"
msgstr "Bugarski"

#: ../../keyboard.pm_.c:171
msgid "Brazilian (ABNT-2)"
msgstr "Brazilski (ABNT-2)"

#: ../../keyboard.pm_.c:172
msgid "Belarusian"
msgstr "Beloruski"

#: ../../keyboard.pm_.c:173
msgid "Swiss (German layout)"
msgstr "�vajcarski (Nema�ki raspored)"

#: ../../keyboard.pm_.c:174
msgid "Swiss (French layout)"
msgstr "�vajcarski (Francuski  raspored)"

#: ../../keyboard.pm_.c:179
msgid "Czech (QWERTY)"
msgstr "�e�ki (QWERTY)"

#: ../../keyboard.pm_.c:181
msgid "German (no dead keys)"
msgstr "Nema�ki (bez mrtvih tastera)"

#: ../../keyboard.pm_.c:182
msgid "Danish"
msgstr "Danski"

#: ../../keyboard.pm_.c:183
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm_.c:184
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norve�ki)"

#: ../../keyboard.pm_.c:185
msgid "Estonian"
msgstr "Estonski"

#: ../../keyboard.pm_.c:189
msgid "Georgian (\"Russian\" layout)"
msgstr "Gruzijski (\"Ruski\" raspored)"

#: ../../keyboard.pm_.c:190
msgid "Georgian (\"Latin\" layout)"
msgstr "Gruzijski (\"Latini�ni\" rapored)"

#: ../../keyboard.pm_.c:191
msgid "Greek"
msgstr "Gr�ki"

#: ../../keyboard.pm_.c:192
msgid "Hungarian"
msgstr "Ma�arski"

#: ../../keyboard.pm_.c:193
msgid "Croatian"
msgstr "Hrvatski"

#: ../../keyboard.pm_.c:194
msgid "Israeli"
msgstr "Jevrejski"

#: ../../keyboard.pm_.c:195
msgid "Israeli (Phonetic)"
msgstr "Jevrejski (Fonetski)"

#: ../../keyboard.pm_.c:196
msgid "Iranian"
msgstr "Iranski"

#: ../../keyboard.pm_.c:197
msgid "Icelandic"
msgstr "Islandski"

#: ../../keyboard.pm_.c:198
msgid "Italian"
msgstr "Italijanski"

#: ../../keyboard.pm_.c:200
msgid "Japanese 106 keys"
msgstr "Japanski 106 tastera"

#: ../../keyboard.pm_.c:201
msgid "Korean keyboard"
msgstr "Korejanska tastatura"

#: ../../keyboard.pm_.c:202
msgid "Latin American"
msgstr "Latino-Ameri�ki"

#: ../../keyboard.pm_.c:203
msgid "Lithuanian AZERTY (old)"
msgstr "Litvanski AZERTY(stari)"

#: ../../keyboard.pm_.c:205
msgid "Lithuanian AZERTY (new)"
msgstr "Litvanski AZERTY(novi)"

#: ../../keyboard.pm_.c:206
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litvanski \"number row\"QWERTY"

#: ../../keyboard.pm_.c:207
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litvanski \"fonetski\" QWERTY"

#: ../../keyboard.pm_.c:208
#, fuzzy
msgid "Latvian"
msgstr "Lokacija"

#: ../../keyboard.pm_.c:209
msgid "Macedonian"
msgstr "Makedonski"

#: ../../keyboard.pm_.c:210
msgid "Dutch"
msgstr "Danski"

#: ../../keyboard.pm_.c:212
msgid "Polish (qwerty layout)"
msgstr "Poljski (qwerty raspored)"

#: ../../keyboard.pm_.c:213
msgid "Polish (qwertz layout)"
msgstr "Poljski (qwertz raspored)"

#: ../../keyboard.pm_.c:214
msgid "Portuguese"
msgstr "Portugalski"

#: ../../keyboard.pm_.c:215
msgid "Canadian (Quebec)"
msgstr "Kanadski (Kvebek)"

#: ../../keyboard.pm_.c:217
msgid "Romanian (qwertz)"
msgstr "Rumunski (qwertz)"

#: ../../keyboard.pm_.c:218
msgid "Romanian (qwerty)"
msgstr "Rumunski (qwerty)"

#: ../../keyboard.pm_.c:220
msgid "Russian (Yawerty)"
msgstr "Ruski (Javerty)"

#: ../../keyboard.pm_.c:222
msgid "Slovenian"
msgstr "Slovena�ki"

#: ../../keyboard.pm_.c:226
msgid "Slovakian (QWERTZ)"
msgstr "Slova�ki (QWERTZ)"

#: ../../keyboard.pm_.c:227
msgid "Slovakian (QWERTY)"
msgstr "Slova�ki (QWERTY)"

#: ../../keyboard.pm_.c:229
#, fuzzy
msgid "Serbian (cyrillic)"
msgstr "Azerbejdzanski (�irilica)"

#: ../../keyboard.pm_.c:230
msgid "Thai keyboard"
msgstr " Thai tastatura"

#: ../../keyboard.pm_.c:232
#, fuzzy
msgid "Tajik keyboard"
msgstr " Thai tastatura"

#: ../../keyboard.pm_.c:233
msgid "Turkish (traditional \"F\" model)"
msgstr "Turski (tradicionalni \"F\" model)"

#: ../../keyboard.pm_.c:234
msgid "Turkish (modern \"Q\" model)"
msgstr "Turski (moderni \"Q\" model)"

#: ../../keyboard.pm_.c:235
msgid "Ukrainian"
msgstr "Ukrajinski"

#: ../../keyboard.pm_.c:238
msgid "US keyboard (international)"
msgstr "US tastatura (internacionalna)"

#: ../../keyboard.pm_.c:239
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vijetnamski  \"number row\"QWERTY"

#: ../../keyboard.pm_.c:240
#, fuzzy
msgid "Yugoslavian (latin)"
msgstr "Srpski (latini�ni/�irili�ni raspored)"

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Kru�no montiranje  %s\n"

#: ../../lvm.pm_.c:83
msgid "Remove the logical volumes first\n"
msgstr "Ukloni prvo logi�ke volumene\n"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun Mi�"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Standardni"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Generi�ki PS2 mi� sa to�ki�em"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
msgid "1 button"
msgstr "1 taster"

#: ../../mouse.pm_.c:44
msgid "Generic"
msgstr "Generic"

#: ../../mouse.pm_.c:45
msgid "Wheel"
msgstr "To�ki�"

#: ../../mouse.pm_.c:48
msgid "serial"
msgstr "serijski"

#: ../../mouse.pm_.c:50
msgid "Generic 2 Button Mouse"
msgstr "Generi�ki 2 tastera mi�"

#: ../../mouse.pm_.c:51
msgid "Generic 3 Button Mouse"
msgstr "Generi�ki 3 tastera mi�"

#: ../../mouse.pm_.c:52
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:53
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:54
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:56
msgid "Logitech CC Series"
msgstr "Logitech CC serija (serijski)"

#: ../../mouse.pm_.c:57
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:59
msgid "MM Series"
msgstr "MM serija"

#: ../../mouse.pm_.c:60
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:61
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech mouse (serijski, stari C7 tip)"

#: ../../mouse.pm_.c:65
msgid "busmouse"
msgstr "bus mi�"

#: ../../mouse.pm_.c:68
msgid "2 buttons"
msgstr "2 tastera"

#: ../../mouse.pm_.c:69
msgid "3 buttons"
msgstr "3 tastera"

#: ../../mouse.pm_.c:72
msgid "none"
msgstr "nijedan"

#: ../../mouse.pm_.c:74
msgid "No mouse"
msgstr "Nema mi�a"

#: ../../mouse.pm_.c:482
msgid "Please test the mouse"
msgstr "Molim Vas da testirate mi�a"

#: ../../mouse.pm_.c:483
msgid "To activate the mouse,"
msgstr "Da bi mogli da aktivirate mi�a"

#: ../../mouse.pm_.c:484
msgid "MOVE YOUR WHEEL!"
msgstr "pomerite to�ki� !"

#: ../../my_gtk.pm_.c:380
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../my_gtk.pm_.c:415
msgid "Finish"
msgstr "Kraj"

#: ../../my_gtk.pm_.c:415
msgid "Next ->"
msgstr "Slede�i  ->"

#: ../../my_gtk.pm_.c:416
msgid "<- Previous"
msgstr "<- Prethodni"

#: ../../my_gtk.pm_.c:716
msgid "Is this correct?"
msgstr "Da li je ovo ispravno ?"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Konektuj na internet"

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Naj�e��i na�in za konekciju sa adsl je pppoe.\n"
"Me�utim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr ""

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "koristi dhcpd"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "koristi pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "koristi pptp"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr "Kog dhcp klijenta �elite da koristite ?Postavljeni je dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Nije detektovana nijedna mre�na kartica.\n"
"Ne mogu da podesim ovaj tip konekcije."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
msgid "Choose the network interface"
msgstr "Izaberite mre�ni interfejs"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"Izaberite mre�ni adapter koji �elite da koristite za konekciju na internet"

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "Nije prona�ena mre�na kartica"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
msgid "Configuring network"
msgstr "Pode�avanje mre�e"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Molim unesite  ime hosta ukoiko ga znate\n"
"'Neki DHCP serveri zahtevaju ime hosta da bi radili.\n"
"Va�e ime hosta treba da bude puno ime kao npr.\n"
"``mybox.mylab.myco.com''."

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
msgid "Host name"
msgstr "Ime hosta:"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
#: ../../network/netconnect.pm_.c:221
msgid "Network Configuration Wizard"
msgstr "�arobnjak za pode�avanje mre�e"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "Eksterni ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Interna  ISDN kartica"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Kakva je vrsta va�e ISDN kenekcije ?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerfull\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Koju ISDN konfiguraciju vi�e preferirate?\n"
"\n"
"* Stara kofiguracja koristi isdn4net. Ona sadr�i mogjne alatke, ali je\n"
"  problemati�na za pode�avanje pogotovo za po�etnike, i nije uobi�ajena.\n"
"\n"
"* Nova konfiguracija je jednostavnija za razumeti, standardnija,\n"
"  ali sa manje opcija i alata.\n"
"\n"
"Mi preporu�ujemo lak�u (jednostavniju) konfiguraciju.\n"
"\n"

#: ../../network/isdn.pm_.c:54
msgid "New configuration (isdn-light)"
msgstr "Nova konfiguracija (isdn-light)"

#: ../../network/isdn.pm_.c:54
msgid "Old configuration (isdn4net)"
msgstr "Stara konfiguracija (isdn4net)"

#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
#: ../../network/isdn.pm_.c:214
msgid "ISDN Configuration"
msgstr "ISDN Konfiguracija"

#: ../../network/isdn.pm_.c:169
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"Izaberite svog provajdera.\n"
" Ukoliko nije na listi, izaberite Unlisted"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol"
msgstr "Startni(Boot) protokol"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol (EDSS1)"
msgstr "Evropa (EDSS1)"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid "Protocol for the rest of the world"
msgstr "Ostatak sveta"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid ""
"Protocol for the rest of the world \n"
" no D-Channel (leased lines)"
msgstr ""
"Ostatak sveta \n"
" bez D-kanala (zakupljene linije)"

#: ../../network/isdn.pm_.c:188
msgid "Which protocol do you want to use ?"
msgstr "Koji protokol �elite da koristite ?"

#: ../../network/isdn.pm_.c:198
msgid "What kind of card do you have?"
msgstr "Kakvu vrstu kartice imate?"

#: ../../network/isdn.pm_.c:199
msgid "I don't know"
msgstr "Ne znam"

#: ../../network/isdn.pm_.c:199
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:199
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:205
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"Ukoliko imate ISA karticu, vrednosti na slede�em ekranu bi trebale biti "
"ispravne.\n"
"\n"
"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za va�u karticu.\n"

#: ../../network/isdn.pm_.c:209
msgid "Abort"
msgstr "Prekini"

#: ../../network/isdn.pm_.c:209
msgid "Continue"
msgstr "Nastavi"

#: ../../network/isdn.pm_.c:215
msgid "Which is your ISDN card ?"
msgstr "Koja je va�a ISDN kartica ?"

#: ../../network/isdn.pm_.c:234
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""
"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
"karticu na slede�em ekranu."

#: ../../network/isdn.pm_.c:243
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Nije prona�ena ISDN PCI kartica.Izaberite jednu na slede�em ekranu."

#: ../../network/modem.pm_.c:37
msgid "Please choose which serial port your modem is connected to."
msgstr "Izaberite serijski port  na koji je modem povezan."

#: ../../network/modem.pm_.c:42
msgid "Dialup options"
msgstr "Dialup opcije"

#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
msgid "Connection name"
msgstr "Ime konekcije"

#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
msgid "Phone number"
msgstr "Broj telefona"

#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
msgid "Login ID"
msgstr "ID za logovanje"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Script-based"
msgstr "Bazirano na skripti"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Terminal-based"
msgstr "Bazirano na terminalu"

#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
msgid "Domain name"
msgstr "Ime domena"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
msgid "First DNS Server (optional)"
msgstr "Prvi DNS Server (opcija)"

#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
msgid "Second DNS Server (optional)"
msgstr "Drugi DNS Server (opcija)"

#: ../../network/netconnect.pm_.c:33
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Mo�ete se diskonektovati ili rekonfigurisati konekciju."

#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Podesi internet konfiguraciju"

#: ../../network/netconnect.pm_.c:33
msgid "You are currently connected to internet."
msgstr "Trenutno ste konektovani na Internet"

#: ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"Sada se mo�ete konektovati na Internet ili rekonfigurisati konekciju"

#: ../../network/netconnect.pm_.c:36
msgid "You are not currently connected to Internet."
msgstr "Trenutno niste konektovani na Internet"

#: ../../network/netconnect.pm_.c:40
msgid "Connect to Internet"
msgstr "Konektuj na Internet"

#: ../../network/netconnect.pm_.c:42
msgid "Disconnect from Internet"
msgstr "Diskonektuj sa Interneta"

#: ../../network/netconnect.pm_.c:44
msgid "Configure network connection (LAN or Internet)"
msgstr "Podesi mre�nu konfiguraciju(LAN ili Internet)"

#: ../../network/netconnect.pm_.c:47
msgid "Internet connection & configuration"
msgstr "Internet konekcija i  konfiguracija"

#: ../../network/netconnect.pm_.c:96
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Sada treba da podesimo %s konekciju."

#: ../../network/netconnect.pm_.c:105
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Sada treba da podesimo %s konekciju.\n"
"\n"
"\n"
"Pritisnite \"U redu\" za nastavak."

#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
msgid "Network Configuration"
msgstr "Pode�avanje mre�e"

#: ../../network/netconnect.pm_.c:130
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Zbog toga �to radite mre�nu instalaciju, va�a mre�a je ve� pode�ena "
"pode�ena.\n"
"Kliknite na  OK  zadrd�ali konfiguraciju Network/Internet konekcije, ili "
"cancel da bi ponovo uradili kofiguraciju.\n"

#: ../../network/netconnect.pm_.c:155
msgid ""
"Welcome to The Network Configuration Wizard\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Dobrodo�li u program za Pode�avanje Mre�ne konekcije\n"
"\n"
"Sada treba da konfiguri�emo va�u internet/mre�nu konekciju.\n"
"Ukoliko ne �elite auto detekciju, deselektujte opciju.\n"

#: ../../network/netconnect.pm_.c:157
msgid "Choose the profile to configure"
msgstr "Izaberite profil za konfigurisanje"

#: ../../network/netconnect.pm_.c:158
msgid "Use auto detection"
msgstr "Koristi auto detekciju"

#: ../../network/netconnect.pm_.c:164
msgid "Detecting devices..."
msgstr "Detektujem  ure�aje..."

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
msgid "Normal modem connection"
msgstr "Normalna modemska konekcija"

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
#, c-format
msgid "detected on port %s"
msgstr "Detektovano na portu %s"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
msgid "ISDN connection"
msgstr "ISDN konekcija"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
#, c-format
msgid "detected %s"
msgstr "detektovano %s"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
msgid "ADSL connection"
msgstr "ADSL konekcija"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, c-format
msgid "detected on interface %s"
msgstr "Detektovano na interfejsu %s"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "Cable connection"
msgstr "Kablovska konekcija"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "cable connection detected"
msgstr "Detektovana je kablovska konekcija "

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "LAN connection"
msgstr "LAN konekcija"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "ethernet card(s) detected"
msgstr "detektovana mre�na kartica(e)"

#: ../../network/netconnect.pm_.c:190
msgid "Choose the connection you want to configure"
msgstr "Izaberite tip konekcije koji �elite da koristite"

#: ../../network/netconnect.pm_.c:214
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Vi ste podesili vi�e na�ina za konektovanje na Internet.\n"
"Izaberite jedan od njih koji �elite da koristite.\n"
"\n"

#: ../../network/netconnect.pm_.c:215
msgid "Internet connection"
msgstr "Internet konekcija"

#: ../../network/netconnect.pm_.c:221
msgid "Do you want to start the connection at boot?"
msgstr "Da li �elite da startujete konektovanje pri startanju sistema ?"

#: ../../network/netconnect.pm_.c:239
msgid "Network configuration"
msgstr "Pode�avanje mre�e"

#: ../../network/netconnect.pm_.c:240
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:243
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Pojavio se problem tokom restartovanja mre�e?\n"
"%s"

#: ../../network/netconnect.pm_.c:247
msgid ""
"Congratulations, the network and internet configuration is finished.\n"
"\n"
"The configuration will now be applied to your system.\n"
msgstr ""
"�estitamo, mre�na i internet konfiguracija je zavr�ena.\n"
"\n"
"Konfiguracija se sada mo�e primeniti na sistem.\n"

#: ../../network/netconnect.pm_.c:250
msgid ""
"After that is done, we recommend you to restart your X\n"
"environnement to avoid hostname changing problem."
msgstr ""
"Kada se to uradi, trebali bi da restartujete X\n"
"okru�enje da bi izbegli probleme sa promenom hostname-a."

#: ../../network/network.pm_.c:283
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"Upozorenje: Ovaj ure�aj je ve� prethodno konfigurisan za konektovanje na "
"Internet.\n"
"Samo prihvaitite da bi postavku ostavili istom.\n"
"Izmena polja koje vidite �e poni�titi postoje�u konfiguraciju."

#: ../../network/network.pm_.c:288
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Molim unesite IP konfiguraciju za ovu ma�inu.\n"
"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
"IP adresa (na primer, 123.45.67.89)."

#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
#, c-format
msgid "Configuring network device %s"
msgstr "Pode�avanje mre�nog ure�aja %s"

#: ../../network/network.pm_.c:298
#, c-format
msgid " (driver %s)"
msgstr "(drajver %s)"

#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
#: ../../standalone/draknet_.c:461
msgid "IP address"
msgstr "IP adresa"

#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
msgid "Netmask"
msgstr "Mre�na maska"

#: ../../network/network.pm_.c:302
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:302
msgid "Automatic IP"
msgstr "Automatski IP"

#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresa treba da bude u formatu 1.2.3.4"

#: ../../network/network.pm_.c:351
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Molim unesite ime va�eg domena, ime hosta, kao IP adrese dodatnih\n"
"'nameserver'-a. Ime va�eg hosta treba da bude puno kvalifikovano ime hosta,\n"
"kao na pr.  ``mybox.mylab.myco.com''.\n"
"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."

#: ../../network/network.pm_.c:356
msgid "DNS server"
msgstr "DNS server"

#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
msgid "Gateway"
msgstr "Gateway"

#: ../../network/network.pm_.c:359
msgid "Gateway device"
msgstr "Gateway ure�aj"

#: ../../network/network.pm_.c:371
msgid "Proxies configuration"
msgstr "Pode�avanje proksija"

#: ../../network/network.pm_.c:372
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: ../../network/network.pm_.c:373
msgid "FTP proxy"
msgstr "FTP proxy"

#: ../../network/network.pm_.c:374
msgid "Track network card id (usefull for laptops)"
msgstr ""

#: ../../network/network.pm_.c:377
msgid "Proxy should be http://..."
msgstr "Proxy treba da bude http://..."

#: ../../network/network.pm_.c:378
msgid "Proxy should be ftp://..."
msgstr "Proxy treba da bude ftp://..."

#: ../../network/tools.pm_.c:38
msgid "Internet configuration"
msgstr "Konfiguracija interneta"

#: ../../network/tools.pm_.c:39
msgid "Do you want to try to connect to the Internet now?"
msgstr "Da li ho�ete da se konektujete na internet sada?"

#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
msgid "Testing your connection..."
msgstr "Testiranje konekcije..."

#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
msgid "The system is now connected to Internet."
msgstr "Sistem je trenutno konektovan na Internet"

#: ../../network/tools.pm_.c:50
msgid "For Security reason, it will be disconnected now."
msgstr "Iz sigurnosnih razloga, on �e sada biti diskonektovan."

#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Izgleda da sistem nije konektovan na Internet.\n"
"Probajte da promenite konfiguraciju."

#: ../../network/tools.pm_.c:75
msgid "Connection Configuration"
msgstr "Konfiguracija Internet konekcije"

#: ../../network/tools.pm_.c:76
msgid "Please fill or check the field below"
msgstr "Molim VAS da popunite ili ozna�ite polja ispod"

#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
msgid "Card IRQ"
msgstr "IRQ kartice"

#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
msgid "Card mem (DMA)"
msgstr "(DMA) kartice"

#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
msgid "Card IO"
msgstr " IO kartice"

#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
msgid "Card IO_0"
msgstr " IO_0 kartice"

#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
msgid "Card IO_1"
msgstr "IO_1 kartice"

#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
msgid "Your personal phone number"
msgstr "Va� li�ni broj telefona"

#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
msgid "Provider name (ex provider.net)"
msgstr "Ime provajdera (npr. provider.net)"

#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
msgid "Provider phone number"
msgstr "Broj telefona provajdera"

#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
msgid "Provider dns 1 (optional)"
msgstr "Provajderov dns 1 (opciono)"

#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
msgid "Provider dns 2 (optional)"
msgstr "Provajderov dns 2 (opciono)"

#: ../../network/tools.pm_.c:88
#, fuzzy
msgid "Choose your country"
msgstr "Izaberi tastaturu"

#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
msgid "Dialing mode"
msgstr "Mod za biranje"

#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
msgid "Connection speed"
msgstr "Brzina konekcije "

#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
#, fuzzy
msgid "Connection timeout (in sec)"
msgstr "Vreme konekcije: "

#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
msgid "Account Login (user name)"
msgstr "Logovanje za ra�un (korisni�ko ime)"

#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
msgid "Account Password"
msgstr "Lozinka za ra�un"

#: ../../partition_table.pm_.c:622
msgid "Extended partition not supported on this platform"
msgstr "Extended particija nije podr�ana na ovoj platformi"

#: ../../partition_table.pm_.c:640
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Imate prazninu u va�oj tabeli particija ali je ne mogu korisiti.\n"
"Jedino re�enje je da pomerite primarnu particiju tako da praznina bude\n"
"do extended particija"

#: ../../partition_table.pm_.c:744
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Otvaranje iz datoteke %s nije uspelo: %s"

#: ../../partition_table.pm_.c:746
msgid "Bad backup file"
msgstr "Lo�e backup-ovana datoteka"

#: ../../partition_table.pm_.c:768
#, c-format
msgid "Error writing to file %s"
msgstr "Gre�ka kod unosa u datoteka %s"

#: ../../partition_table_raw.pm_.c:154
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Ne�to lo�e se de�ava sa va�im hard diskom. \n"
"Test integriteta podataka nije pro�ao. \n"
"To zna�i da sve �to se nalazi na disku �e zavr�iti kao �ubre"

#: ../../pkgs.pm_.c:24
msgid "must have"
msgstr "mora imati"

#: ../../pkgs.pm_.c:25
msgid "important"
msgstr "va�no"

#: ../../pkgs.pm_.c:26
msgid "very nice"
msgstr "veoma lepo"

#: ../../pkgs.pm_.c:27
msgid "nice"
msgstr "lepo"

#: ../../pkgs.pm_.c:28
msgid "maybe"
msgstr "mo�da"

#: ../../printer.pm_.c:23
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Op�ti Unix-ov sistem za �tampanje"

#: ../../printer.pm_.c:24
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR Nove Generacije"

#: ../../printer.pm_.c:25
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Demon"

#: ../../printer.pm_.c:26
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - �tampaj, nemoj da pamti�"

#: ../../printer.pm_.c:32
msgid "CUPS"
msgstr ""

#: ../../printer.pm_.c:33
msgid "LPRng"
msgstr ""

#: ../../printer.pm_.c:34
msgid "LPD"
msgstr ""

#: ../../printer.pm_.c:35
msgid "PDQ"
msgstr ""

#: ../../printer.pm_.c:40
msgid "Local printer"
msgstr "Lokalni  �tampa�"

#: ../../printer.pm_.c:41
msgid "Remote printer"
msgstr "Udaljeni �tampa�"

#: ../../printer.pm_.c:42
#, fuzzy
msgid "Printer on remote CUPS server"
msgstr "Udaljeni CUPS server"

#: ../../printer.pm_.c:43
#, fuzzy
msgid "Printer on remote lpd server"
msgstr "Udaljeni lpd server"

#: ../../printer.pm_.c:44
msgid "Network printer (socket)"
msgstr "Mre�ni �tampa� (socket)"

#: ../../printer.pm_.c:45
#, fuzzy
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/Windows 95/98/NT"

#: ../../printer.pm_.c:46
#, fuzzy
msgid "Printer on NetWare server"
msgstr "Server �tampa�a:"

#: ../../printer.pm_.c:47
#, fuzzy
msgid "Enter a printer device URI"
msgstr "Ure�aj za �tampa� URI"

#: ../../printer.pm_.c:48
#, fuzzy
msgid "Pipe job into a command"
msgstr "Ubaci u komandu"

#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
msgid "Unknown model"
msgstr ""

#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer.pm_.c:693
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(modul %s)"

#: ../../printer.pm_.c:695
msgid "(on this machine)"
msgstr ""

#: ../../printerdrake.pm_.c:22
msgid "Select Printer Connection"
msgstr "Izbor povezanosti �tampa�a"

#: ../../printerdrake.pm_.c:23
msgid "How is the printer connected?"
msgstr "Kako je �tampa� povezan?"

#: ../../printerdrake.pm_.c:25
#, fuzzy
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure\n"
"here; these printers will be automatically detected. Please\n"
"select \"Printer on remote CUPS server\" in this case."
msgstr ""
"Sa udaljenim CUPS serverom, ne morate da kofiguri�ete\n"
"ovde ni jedan �tampa�; �tampa�i �e biti automatski detektovani.\n"
"osim ako imate server na drugoj mre�i; ako je to\n"
"slu�aj, morate dati IP adresu  CUPS servera\n"
"a opciono i broj porta."

#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
msgid "None"
msgstr "Nijedan"

#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
#, fuzzy
msgid "Choose a default printer!"
msgstr "Izaberite default (osnovnog) korisnika:"

#: ../../printerdrake.pm_.c:105
msgid ""
"With remote CUPS servers, you do not have to configure any \n"
"printer here; CUPS servers inform your machine automatically\n"
"about their printers. All printers known to your machine\n"
"currently are listed in the \"Default printer\" field. Choose\n"
"the default printer for your machine there and click the\n"
"\"Apply/Re-read printers\" button. Click the same button to\n"
"refresh the list (it can take up to 30 seconds after the start\n"
"of CUPS until all remote printers are visible).\n"
"When your CUPS server is in a different network, you have to \n"
"give the CUPS server IP address and optionally the port number\n"
"to get the printer information from the server, otherwise leave\n"
"these fields blank."
msgstr ""

#: ../../printerdrake.pm_.c:117
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your\n"
"network environment, so that you can access the printers on the\n"
"CUPS servers in your local network. If this does not work \n"
"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
"CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
msgid "Close"
msgstr "Zatvori"

#: ../../printerdrake.pm_.c:125
#, fuzzy
msgid "Apply/Re-read printers"
msgstr "Udaljeni �tampa�"

#: ../../printerdrake.pm_.c:129
#, fuzzy
msgid "The IP address should look like 192.168.1.20"
msgstr "IP adresa treba da bude u formatu 1.2.3.4"

#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
#, fuzzy
msgid "The port number should be an integer!"
msgstr "Broj porta bi trebao da bude numeri�ki broj"

#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
#, fuzzy
msgid "Default printer"
msgstr "Lokalni  �tampa�"

#: ../../printerdrake.pm_.c:146
msgid "CUPS server IP"
msgstr "SMB server IP:"

#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:149
#, fuzzy
msgid "Automatic CUPS configuration"
msgstr "Konfiguracija stila startanja"

#: ../../printerdrake.pm_.c:217
#, fuzzy
msgid "Detecting devices ..."
msgstr "Detektujem  ure�aje..."

#: ../../printerdrake.pm_.c:217
msgid "Test ports"
msgstr "Testiranje portova"

#: ../../printerdrake.pm_.c:238
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "�tampa�, model \"%s\", je detektovan na "

#: ../../printerdrake.pm_.c:255
msgid "Local Printer Device"
msgstr "Lokalni ure�aj za �tampa�"

#: ../../printerdrake.pm_.c:256
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Na koji ure�aj je va� �tampa� povezan \n"
"(/dev/lp0 odgovara LPT1: u DOS-u)?\n"

#: ../../printerdrake.pm_.c:258
msgid "Printer Device"
msgstr "Ure�aj za �tampa�:"

#: ../../printerdrake.pm_.c:261
msgid "Device/file name missing!"
msgstr "Nedostaje UreKjaj/ime datoteke!"

#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
#: ../../printerdrake.pm_.c:786
#, fuzzy
msgid "Reading printer database ..."
msgstr "U�itavam CUPS bazu podataka o drajverima..."

#: ../../printerdrake.pm_.c:312
msgid "Remote lpd Printer Options"
msgstr "Opcije za udaljeni lpd"

#: ../../printerdrake.pm_.c:313
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply\n"
"the hostname of the printer server and the printer name\n"
"on that server."
msgstr ""
"Da biste mogli da koristite udaljeni red poslova\n"
"za �tampu morate navesti ime hosta na kome je server za �tampa�\n"
"i ime reda poslova za �tampu na tom serveru."

#: ../../printerdrake.pm_.c:316
#, fuzzy
msgid "Remote host name"
msgstr "Ime udaljenog host-a:"

#: ../../printerdrake.pm_.c:317
#, fuzzy
msgid "Remote printer name"
msgstr "Udaljeni �tampa�"

#: ../../printerdrake.pm_.c:320
msgid "Remote host name missing!"
msgstr "Nedostaje ime udaljenog host-a!"

#: ../../printerdrake.pm_.c:324
#, fuzzy
msgid "Remote printer name missing!"
msgstr "Nedostaje ime udaljenog host-a!"

#: ../../printerdrake.pm_.c:392
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT)  opcije �tampa�a"

#: ../../printerdrake.pm_.c:393
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"Da biste mogli da �tampate na mre�ni �tampa�, treba da navedete\n"
"ime hosta LAN menad�era (koje nije uvek isto kao TCP/IP ime ma�ine);\n"
"IP adresu �tampa�evog servera; deljeno ime �tampa�a kome pristupate,\n"
"kao i potrebna korisni�ka imena i lozinke."

#: ../../printerdrake.pm_.c:398
msgid "SMB server host"
msgstr "SMB server  host:"

#: ../../printerdrake.pm_.c:399
msgid "SMB server IP"
msgstr "SMB server IP:"

#: ../../printerdrake.pm_.c:400
msgid "Share name"
msgstr "Deljeno (zajedni�ko)  ime :"

#: ../../printerdrake.pm_.c:403
msgid "Workgroup"
msgstr "Radna grupa(Workgroup):"

#: ../../printerdrake.pm_.c:410
msgid "Either the server name or the server's IP must be given!"
msgstr "Morate dati ili ime servera ili njegov IP!"

#: ../../printerdrake.pm_.c:414
msgid "Samba share name missing!"
msgstr "Nedostaje deljeno ime za Samba-u!"

#: ../../printerdrake.pm_.c:473
msgid "NetWare Printer Options"
msgstr "NetWare opcije �tampa�a"

#: ../../printerdrake.pm_.c:474
msgid ""
"To print on a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"Da biste mogli da �tampate na NetWare �tampa�, treba da navedete\n"
"ime  NetWare servera za �tampa� (koje nije uvek isto kao TCP/IPhostname! );\n"
"te  ime 'reda' �tampa�a kome pristupate,\n"
"kao i potrebna korisni�ka imena i lozinke."

#: ../../printerdrake.pm_.c:478
msgid "Printer Server"
msgstr "Server �tampa�a:"

#: ../../printerdrake.pm_.c:479
msgid "Print Queue Name"
msgstr "Print Queue ime:"

#: ../../printerdrake.pm_.c:484
msgid "NCP server name missing!"
msgstr "Nedostaje ime NCP servera!"

#: ../../printerdrake.pm_.c:488
msgid "NCP queue name missing!"
msgstr "Nedostaje ime za NCP red!"

#: ../../printerdrake.pm_.c:527
msgid "Socket Printer Options"
msgstr "Opcije prklju�nog  �tampa�a"

#: ../../printerdrake.pm_.c:528
#, fuzzy
msgid ""
"To print to a socket printer, you need to provide the\n"
"host name of the printer and optionally the port number.\n"
"On HP JetDirect servers the port number is usually 9100,\n"
"on other servers it can vary. See the manual of your\n"
"hardware."
msgstr ""
"Da bi �tampali na prklju�nom �tampa�u, morate obezbediti\n"
"ime hosta za �tampa� i eventualno broj porta."

#: ../../printerdrake.pm_.c:533
#, fuzzy
msgid "Printer host name"
msgstr "Ime hosta za �tampa�"

#: ../../printerdrake.pm_.c:537
msgid "Printer host name missing!"
msgstr "Nedostaje ime hosta!"

#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
msgid "Printer Device URI"
msgstr "Ure�aj za �tampa� URI"

#: ../../printerdrake.pm_.c:567
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Mo�ete direktno odrediti URI za pristup �tampa�u. URI mora ispunjavati ili "
"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podr�ani."

#: ../../printerdrake.pm_.c:582
msgid "A valid URI must be entered!"
msgstr "Morate uneti validan URI!"

#: ../../printerdrake.pm_.c:682
msgid ""
"Every printer needs a name (for example lp).\n"
"The Description and Location fields do not need \n"
"to be filled in. They are comments for the users."
msgstr ""
"Svaki �tampa� mora da ima ime (na primer lp).\n"
"Polja za Opis i Lokaciju ne moraju biti \n"
"popunjena. To su samo korisne napomene za korisnike."

#: ../../printerdrake.pm_.c:685
msgid "Name of printer"
msgstr "Ime �tampa�a"

#: ../../printerdrake.pm_.c:686
msgid "Description"
msgstr "Opis"

#: ../../printerdrake.pm_.c:687
msgid "Location"
msgstr "Lokacija"

#: ../../printerdrake.pm_.c:701
#, fuzzy
msgid "Preparing printer database ..."
msgstr "U�itavam CUPS bazu podataka o drajverima..."

#: ../../printerdrake.pm_.c:793
msgid "Printer model selection"
msgstr "Selekcija modela �tampa�a"

#: ../../printerdrake.pm_.c:794
msgid "Which printer model do you have?"
msgstr "Koju model �tampa�a imate?"

#: ../../printerdrake.pm_.c:866
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "Konfiguracija interneta"

#: ../../printerdrake.pm_.c:867
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they\n"
"work only when connected to the first parallel port. When\n"
"your printer is connected to another port or to a print\n"
"server box please connect the printer to the first parallel\n"
"port before you print a test page. Otherwise the printer\n"
"will not work. Your connection type setting will be ignored\n"
"by the driver."
msgstr ""

#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "Konfiguracija interneta"

#: ../../printerdrake.pm_.c:917
msgid ""
"The inkjet printer drivers provided by Lexmark only support\n"
"local printers, no printers on remote machines or print server\n"
"boxes. Please connect your printer to a local port or\n"
"configure it on the machine where it is connected to."
msgstr ""

#: ../../printerdrake.pm_.c:947
msgid ""
"To be able to print with your Lexmark inkjet and this\n"
"configuration, you need the inkjet printer drivers\n"
"provided by Lexmark (http://www.lexmark.com/). Go to\n"
"the US site and click on the \"Drivers\" button. Then\n"
"choose your model and afterwards \"Linux\" as\n"
"operating system. The drivers come as RPM packages\n"
"or shell scripts with interactive graphical installation.\n"
"You do not need to do this configuration by the\n"
"graphical frontends. Cancel directly after the license\n"
"agreement. Then print printhead alignment pages with\n"
"\"lexmarkmaintain\" and adjust the head alignment\n"
"settings with this program."
msgstr ""

#: ../../printerdrake.pm_.c:1079
msgid ""
"Printer default settings\n"
"You should make sure that the page size and the\n"
"ink type (if available) are set correctly. Note\n"
"that with a very high printout quality printing\n"
"can get substantially slower."
msgstr ""

#: ../../printerdrake.pm_.c:1090
#, fuzzy, c-format
msgid "Option %s must be an integer number!"
msgstr "Port mora biti brojna oznaka!"

#: ../../printerdrake.pm_.c:1094
#, fuzzy, c-format
msgid "Option %s must be a number!"
msgstr "Port mora biti brojna oznaka!"

#: ../../printerdrake.pm_.c:1099
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: ../../printerdrake.pm_.c:1136
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "Da li �elite da i�tampate test stranicu?"

#: ../../printerdrake.pm_.c:1152
#, fuzzy
msgid "Test pages"
msgstr "Testiranje portova"

#: ../../printerdrake.pm_.c:1153
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed\n"
"and on laser printers with too low memory it can even not come out.\n"
"In most cases it is enough to print the standard test page."
msgstr ""

#: ../../printerdrake.pm_.c:1158
msgid "No test pages"
msgstr ""

#: ../../printerdrake.pm_.c:1159
#, fuzzy
msgid "Print"
msgstr "�tampa�"

#: ../../printerdrake.pm_.c:1161
#, fuzzy
msgid "Standard test page"
msgstr "Standardni"

#: ../../printerdrake.pm_.c:1164
msgid "Alternative test page (Letter)"
msgstr ""

#: ../../printerdrake.pm_.c:1167
#, fuzzy
msgid "Alternative test page (A4)"
msgstr "�tampam test stran(ice)u..."

#: ../../printerdrake.pm_.c:1169
#, fuzzy
msgid "Photo test page"
msgstr "�tampam test stran(ice)u..."

#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
msgid "Printing test page(s)..."
msgstr "�tampam test stran(ice)u..."

#: ../../printerdrake.pm_.c:1200
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Test stran(ice)a je poslana �tampa� demonu.\n"
"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"
"Status �tampa�a:\n"
"%s\n"
"\n"
"Da li radi OK ?"

#: ../../printerdrake.pm_.c:1204
#, fuzzy
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Test stran(ice)a je poslana �tampa� demonu.\n"
"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"
"Da li radi OK ?"

#: ../../printerdrake.pm_.c:1211
msgid "Did it work properly?"
msgstr ""

#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
#, fuzzy
msgid "Raw printer"
msgstr "Bez �tampa�a"

#: ../../printerdrake.pm_.c:1237
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1239
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
#: ../../printerdrake.pm_.c:1266
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
msgid ""
"To get a list of the options available for the current printer read either "
"the list shown below or click on the \"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
#: ../../printerdrake.pm_.c:1275
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1273
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1277
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1281
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1292
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Odstupam od mre�e"

#: ../../printerdrake.pm_.c:1294
#, fuzzy
msgid "Print option list"
msgstr "Opcije �tampa�a"

#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
#: ../../standalone/printerdrake_.c:48
msgid "Reading printer data ..."
msgstr ""

#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
#: ../../printerdrake.pm_.c:1411
#, fuzzy
msgid "Transfer printer configuration"
msgstr "Konfiguracija interneta"

#: ../../printerdrake.pm_.c:1339
#, c-format
msgid ""
"You can copy the printer configuration which you have done \n"
"for the spooler %s to %s, your current spooler. All the\n"
"configuration data (printer name, description, location, \n"
"connection type, and default option settings) is overtaken,\n"
"but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following \n"
"reasons:\n"
msgstr ""

#: ../../printerdrake.pm_.c:1347
msgid ""
"CUPS does not support printers on Novell servers or printers\n"
"sending the data into a free-formed command.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1350
msgid ""
"PDQ only supports local printers, remote LPD printers, and\n"
"Socket/TCP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1353
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1355
msgid ""
"In addition, queues not created with this program or\n"
"\"foomatic-configure\" cannot be transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1357
msgid ""
"\n"
"Also printers configured with the PPD files provided by\n"
"their manufacturers or with native CUPS drivers can not be\n"
"transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1360
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printerdrake.pm_.c:1363
msgid "Do not transfer printers"
msgstr ""

#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
msgid "Transfer"
msgstr ""

#: ../../printerdrake.pm_.c:1377
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printerdrake.pm_.c:1385
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Ime �tampa�a treba da sadr�i samo slova, brojeve i underscore"

#: ../../printerdrake.pm_.c:1390
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printerdrake.pm_.c:1398
#, fuzzy
msgid "New printer name"
msgstr "Bez �tampa�a"

#: ../../printerdrake.pm_.c:1401
#, c-format
msgid "Transferring %s ..."
msgstr ""

#: ../../printerdrake.pm_.c:1412
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"),\n"
"Should it be also the default printer under the\n"
"new printing system %s?"
msgstr ""

#: ../../printerdrake.pm_.c:1423
#, fuzzy
msgid "Refreshing printer data ..."
msgstr "U�itavam CUPS bazu podataka o drajverima..."

#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
#: ../../printerdrake.pm_.c:1515
#, fuzzy
msgid "Configuration of a remote printer"
msgstr "Pode�avanje �tampa�a"

#: ../../printerdrake.pm_.c:1432
#, fuzzy
msgid "Starting network ..."
msgstr "Startujem konekciju..."

#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
#: ../../printerdrake.pm_.c:1464
#, fuzzy
msgid "Configure the network now"
msgstr "Podesi mre�u"

#: ../../printerdrake.pm_.c:1455
#, fuzzy
msgid "Network functionality not configured"
msgstr "Monitor nije konfigurisan"

#: ../../printerdrake.pm_.c:1456
msgid ""
"You are going to configure a remote printer. This needs working\n"
"network access, but your network is not configured yet. If you\n"
"go on without network configuration, you will not be able to use\n"
"the printer which you are configuring now. How do you want \n"
"to proceed?"
msgstr ""

#: ../../printerdrake.pm_.c:1463
#, fuzzy
msgid "Go on without configuring the network"
msgstr "Pode�avanje mre�e"

#: ../../printerdrake.pm_.c:1496
msgid ""
"The network configuration done during the installation \n"
"cannot be started now. Please check whether the network\n"
"gets accessable after booting your system and correct the\n"
"configuration using the Mandrake Control Center, section\n"
"\"Network & Internet\"/\"Connection\", and afterwards set\n"
"up the printer, also using the Mandrake Control Center,\n"
"section \"Hardware\"/\"Printer\""
msgstr ""

#: ../../printerdrake.pm_.c:1503
msgid ""
"The network access was not running and could not be \n"
"started. Please check your configuration and your \n"
"hardware. Then try to configure your remote printer\n"
"again."
msgstr ""

#: ../../printerdrake.pm_.c:1516
#, fuzzy
msgid "Restarting printing system ..."
msgstr "Koji sistem za �tampanje �elite da koristite ?"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "high"
msgstr "Velika"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "paranoid"
msgstr "Paranoidna"

#: ../../printerdrake.pm_.c:1549
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printerdrake.pm_.c:1550
#, c-format
msgid ""
"You are about to install the printing system %s on\n"
"a system running in the %s security level.\n"
"\n"
"This printing system runs a daemon (background process)\n"
"which waits for print jobs and handles them. This daemon\n"
"is also accessable by remote machines through the network\n"
"and so it is a possible point for attacks. Therefore only\n"
"a few selected daemons are started by default in this\n"
"security level.\n"
"\n"
"Do you really want to configure printing on this\n"
"machine?"
msgstr ""

#: ../../printerdrake.pm_.c:1584
#, fuzzy
msgid "Starting the printing system at boot time"
msgstr "Koji sistem za �tampanje �elite da koristite ?"

#: ../../printerdrake.pm_.c:1585
#, c-format
msgid ""
"The printing system (%s) will not be started automatically\n"
"when the machine is booted.\n"
"\n"
"It is possible that the automatic starting was turned off \n"
"by changing to a higher security level, because the printing\n"
"system is a potential point for attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing\n"
"system turned on again?"
msgstr ""

#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
#: ../../printerdrake.pm_.c:1778
msgid "Checking installed software..."
msgstr ""

#: ../../printerdrake.pm_.c:1648
msgid "Removing LPRng..."
msgstr ""

#: ../../printerdrake.pm_.c:1675
msgid "Removing LPD..."
msgstr ""

#: ../../printerdrake.pm_.c:1727
msgid "Select Printer Spooler"
msgstr "Izaberite Spooler za �tampa�"

#: ../../printerdrake.pm_.c:1728
msgid "Which printing system (spooler) do you want to use?"
msgstr "Koji sistem za �tampanje (spooler) �elite da koristite ?"

#: ../../printerdrake.pm_.c:1759
#, fuzzy, c-format
msgid "Configuring printer \"%s\" ..."
msgstr "Podesi �tampa�"

#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
msgid "Printer options"
msgstr "Opcije �tampa�a"

#: ../../printerdrake.pm_.c:1815
msgid "Preparing PrinterDrake ..."
msgstr ""

#: ../../printerdrake.pm_.c:1845
msgid "Would you like to configure printing?"
msgstr "Da li biste da podesite �tampa�?"

#: ../../printerdrake.pm_.c:1857
msgid "Printing system: "
msgstr ""

#: ../../printerdrake.pm_.c:1879
msgid ""
"The following printers are configured.\n"
"Click on one of them to modify it or\n"
"to get information about it or on \n"
"\"Add Printer\" to add a new printer."
msgstr ""

#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
msgid "Normal Mode"
msgstr "Normalni Mod"

#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
msgid " (Default)"
msgstr " (Podrazumevano)"

#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
#, fuzzy
msgid "Printer(s) on remote CUPS server(s)"
msgstr "Udaljeni CUPS server"

#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
#, fuzzy
msgid "Printer(s) on remote server(s)"
msgstr "Udaljeni CUPS server"

#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
msgid "Add printer"
msgstr "Dodajte �tampa�"

#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
#: ../../printerdrake.pm_.c:2128
#, fuzzy
msgid "Do you want to configure another printer?"
msgstr "Da li ho�ete da testirate konfiguraciju?"

#: ../../printerdrake.pm_.c:2003
#, fuzzy
msgid "Modify printer configuration"
msgstr "Konfiguracija interneta"

#: ../../printerdrake.pm_.c:2004
#, c-format
msgid ""
"Printer %s: %s %s\n"
"What do you want to modify on this printer?"
msgstr ""

#: ../../printerdrake.pm_.c:2012
msgid "Do it!"
msgstr ""

#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
#, fuzzy
msgid "Printer connection type"
msgstr "Internet konekcija"

#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
#, fuzzy
msgid "Printer name, description, location"
msgstr "Selekcija modela �tampa�a"

#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
msgid "Printer manufacturer, model, driver"
msgstr ""

#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
msgid "Printer manufacturer, model"
msgstr ""

#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
msgid "Set this printer as the default"
msgstr ""

#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
#, fuzzy
msgid "Print test pages"
msgstr "�tampam test stran(ice)u..."

#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
msgid "Know how to print with this printer"
msgstr ""

#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
#, fuzzy
msgid "Remove printer"
msgstr "Udaljeni �tampa�"

#: ../../printerdrake.pm_.c:2071
#, fuzzy, c-format
msgid "Removing old printer \"%s\" ..."
msgstr "Udaljeni �tampa�"

#: ../../printerdrake.pm_.c:2096
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: ../../printerdrake.pm_.c:2103
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Da li ho�ete da restartujete mre�e?"

#: ../../printerdrake.pm_.c:2105
#, fuzzy, c-format
msgid "Removing printer \"%s\" ..."
msgstr "Udaljeni �tampa�"

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
msgid "Proxy configuration"
msgstr "Pode�avanje proksija"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""
"Dobrodo�li u alat za konfiguraciju proxy-ja.\n"
"\n"
"Ovde mo�ete da podesite va�e http i ftp proksije\n"
"sa ili bez korisni�kog imena i lozinke\n"

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""
"Molim Vas da unesete http proxy informacije\n"
"Ostavite polja praznima ukoliko ne �elite da koristetite proksi"

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr "URL"

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
msgid "port"
msgstr "Port"

#: ../../proxy.pm_.c:44
msgid "Url should begin with 'http:'"
msgstr "Url treba da po�inje sa http://..."

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
msgid "The port part should be numeric"
msgstr "Broj porta bi trebao da bude numeri�ka oznaka (broj)"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""
"Molim Vas da unesete informacije o ftp proxy-ju\n"
"Polja ostavite praznima ukoliko ne �elite da koristite ftp proksi"

#: ../../proxy.pm_.c:65
msgid "Url should begin with 'ftp:'"
msgstr "Url treba da po�inje sa 'ftp:'"

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""
"Unesite proxy korisni�ko ime i lozinku, ukoliko postoje.\n"
"Polja ostavite paznima ukoliko ne �elite da koristite korisni�ko ime/lozinku"

#: ../../proxy.pm_.c:80
msgid "login"
msgstr "logovanje"

#: ../../proxy.pm_.c:82
msgid "password"
msgstr "lozinka"

#: ../../proxy.pm_.c:84
msgid "re-type password"
msgstr "pomovo unesite lozinke"

#: ../../proxy.pm_.c:88
msgid "The passwords don't match. Try again!"
msgstr "Nepodudarnost lozinki. Probajte ponovo!"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Nije mogu�e dodati particiju na _formatiran_ RAID md%d"

#: ../../raid.pm_.c:111
#, c-format
msgid "Can't write file %s"
msgstr "Nije mogu� unos u fajl %s"

#: ../../raid.pm_.c:136
msgid "mkraid failed"
msgstr "mkraid neuspelo"

#: ../../raid.pm_.c:136
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid neuspelo (mo�da nedostaje raidtools ?)"

#: ../../raid.pm_.c:152
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nema dovoljno particija za RAID nivo %d\n"

#: ../../services.pm_.c:15
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"

#: ../../services.pm_.c:16
msgid "Anacron a periodic command scheduler."
msgstr "Anacron -  podesite period.komande"

#: ../../services.pm_.c:17
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd se koristi za pra�enje statusa baterije i logovanje preko syslog.\n"
"Koristi se i za ga�enje ma�ine (radi i na desktop ma�inama) kada je baterija "
"slaba"

#: ../../services.pm_.c:19
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Pokre�e komande zakazane at komandom,kao i  batch  komande kao je "
"optere�enost\n"
"sistema mala."

#: ../../services.pm_.c:21
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron je standardni UNIX program koji pokre�e korisni�ke programe\n"
"preriodi�no u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
"uklju�uju�i bolju  sigurnost i bolju podesivost."

#: ../../services.pm_.c:24
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM daje podr�ku za mi�a za teksulano-bazirane aplikacije kao �to je\n"
"Midnight Commander.Isto tako daje podr�ku za  pop-up menije na  konzoli."

#: ../../services.pm_.c:27
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake starta ispitivanje haredvera, i po potrebi gje podesiti \n"
"novi/izmenjeni hardver."

#: ../../services.pm_.c:29
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr ""
"Apache je  WWW server. On se koristi da opslu�uje  HTML fajlove\n"
"i CGI."

#: ../../services.pm_.c:31
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Interent super server demon (znan kao netd) starta \n"
"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
"elnet, ftp, rsh, i  rlogin.Isklju�uju�i njega, isklju�ujete i servise \n"
"za koje je on odgovoran."

#: ../../services.pm_.c:35
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
"firewall radi za�tite va�e ma�ine od mre�nih napada."

#: ../../services.pm_.c:37
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Ovaj paket aktivira odabranu mapu tastature kako je pode�eno \n"
"u  /etc/sysconfig/keyboard.Ovo se pode�ava koriste�i kbdconfig alatku.\n"
"Treba da bude uklju�en na ve�inu ma�ina."

#: ../../services.pm_.c:40
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../services.pm_.c:42
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."

#: ../../services.pm_.c:43
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf gje ponekad izvoditi razne zadatke tokom\n"
"startanja sistema radi odr�avanja i pode�avanja sistema."

#: ../../services.pm_.c:45
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd je print demon potreban  da bi  lpr radio dobro.To je \n"
"u osnovi server koji arbitrira  print poslove �tampa�u(ima)."

#: ../../services.pm_.c:47
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
"servera."

#: ../../services.pm_.c:49
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"Nazvan  (BIND) je Domain Name Server (DNS) koji se koristi za daje  \n"
"host ime  IP adresi."

#: ../../services.pm_.c:51
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Montiranje i demontiranje svih Mre�nih fajl sistema(NFS), SMB (Lan\n"
"Manager/Windows), i  NCP (NetWare) ta�aka montiranja. "

#: ../../services.pm_.c:53
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiviranje i deaktiviranje svih mre�nih interfejsa konfigurisanih za "
"start \n"
"pri podizanju sistema."

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
"Ovaj servis omogu�ava funkcionalnost NFS servera,koji se konfiguri�e preko \n"
"/etc/exports datoteke."

#: ../../services.pm_.c:58
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
"Ovaj servis omogu�ava funkcionalnost NFS  file locking funkcije"

#: ../../services.pm_.c:60
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Automatski uklju�uje numlock taster pod konzolom\n"
"i u XFree pri startanju."

#: ../../services.pm_.c:62
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Podr�ka za OKI 4w i kompatibilne mu  win �tampa�e."

#: ../../services.pm_.c:63
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA podr�ka  se obi�no koristi za  eternet i modeme u laptopovima.\n"
"Ne�e se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
"na sistemu kom nije potreban."

#: ../../services.pm_.c:66
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmaper uravlja  RPC konekcijama,koje koriste\n"
"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na ma�inama\n"
"koje rade kao serveri za protokole koji koriste RPC mehanizam."

#: ../../services.pm_.c:69
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix je  Mail Transport Agent,koji u stvari \n"
"preme�ta po�tu sa jedne ma�ine na drugu."

#: ../../services.pm_.c:71
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"�uva i obnavlja sistemski  entropy pool za ve�i kvalitet generisanje\n"
"slu�ajnih brojeva."

#: ../../services.pm_.c:73
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""
"Dodeljuje raw ureKjaje za blok ureKjaje (kao �to su hard disk\n"
"particije), �to mogje biti korisno za aplikacije kao �to je Oracle"

#: ../../services.pm_.c:75
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
"RIP protokola.Dok se RIP dosta korisiti na malim mre�ama,kompleksniji \n"
" routing protokoli su potrebni za kompleksne mre�e."

#: ../../services.pm_.c:78
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokol dozvoljava korisnicima na mre�i da omogu�e\n"
"merenje performansi za bilo koju ma�inu na toj  mre�i."

#: ../../services.pm_.c:80
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokol omogu�ava korisnicima na mre�i da otkriju ko je\n"
"ulogovan na drugim ma�inama."

#: ../../services.pm_.c:82
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (sli�no finger-u)."

#: ../../services.pm_.c:84
msgid "Launch the sound system on your machine"
msgstr "Pokregje sistem za zvuk na va�oj ma�ini"

#: ../../services.pm_.c:85
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog je objekat pomo�u kog mnogi demoni koriste za logovanje poruka\n"
"u raznim sistemskim log fajlovima.Dobra je ideja imati uvek pokrenut syslog."

#: ../../services.pm_.c:87
msgid "Load the drivers for your usb devices."
msgstr "Podi�e drajvere za va�e usb ureKjaje."

#: ../../services.pm_.c:88
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Pokre�e X Font server (potrebno za pokretanje XFree)."

#: ../../services.pm_.c:114 ../../services.pm_.c:156
msgid "Choose which services should be automatically started at boot time"
msgstr "Izaberite koje servisi  treba automatski da se startuju pri boot-anju"

#: ../../services.pm_.c:126
#, fuzzy
msgid "Printing"
msgstr "�tampa�"

#: ../../services.pm_.c:127
msgid "Internet"
msgstr "Internet"

#: ../../services.pm_.c:130
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:132
#, fuzzy
msgid "System"
msgstr "Sistemski mod"

#: ../../services.pm_.c:137
#, fuzzy
msgid "Remote Administration"
msgstr "Opcije za udaljeni lpd"

#: ../../services.pm_.c:145
#, fuzzy
msgid "Database Server"
msgstr "Server,Baze podataka"

#: ../../services.pm_.c:174
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:186
#, fuzzy
msgid "Services"
msgstr "ure�aj"

#: ../../services.pm_.c:198
msgid "running"
msgstr "pokrenuto"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "zaustavljeno"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr "Servisi i demoni"

#: ../../services.pm_.c:217
msgid ""
"No additionnal information\n"
"about this service, sorry."
msgstr ""
"�alim ali nema dodatnih informacija\n"
"o ovom servisu."

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "Pri startanju"

#: ../../standalone.pm_.c:25
#, fuzzy
msgid "Installing packages..."
msgstr "Instaliram paket %s"

#: ../../standalone/diskdrake_.c:63
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Ne mogu pro�itati tabelu particija, mnogo je iskvarena za mene :(\n"
"Poku�a�u dalje zaobilaze�i lo�e particije"

#: ../../standalone/drakautoinst_.c:44
#, fuzzy
msgid "Error!"
msgstr "Gre�ka"

#: ../../standalone/drakautoinst_.c:45
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: ../../standalone/drakautoinst_.c:47
#, fuzzy
msgid "Auto Install Configurator"
msgstr "Postinstalaciona konfiguracija"

#: ../../standalone/drakautoinst_.c:48
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst_.c:70
#, fuzzy
msgid "Automatic Steps Configuration"
msgstr "Konfiguracija stila startanja"

#: ../../standalone/drakautoinst_.c:71
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
msgid "Congratulations!"
msgstr "�estitam !"

#: ../../standalone/drakautoinst_.c:113
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
msgid "Internet Connection Sharing"
msgstr "Deljenje internet konekcije"

#: ../../standalone/drakgw_.c:119
msgid "Internet Connection Sharing currently enabled"
msgstr "Deljenje internet konekcije je trenutno omogu�eno "

#: ../../standalone/drakgw_.c:120
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno.\n"
"Trenutno je omogu�eno.\n"
"\n"
"�ta �elite da uradite?"

#: ../../standalone/drakgw_.c:124
msgid "disable"
msgstr "onemogu�i"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "dismiss"
msgstr "ukloni"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "reconfigure"
msgstr "ponovo podesi"

#: ../../standalone/drakgw_.c:127
msgid "Disabling servers..."
msgstr "Uklanjam servise..."

#: ../../standalone/drakgw_.c:135
msgid "Internet connection sharing is now disabled."
msgstr "Deljenje internet konekcije je onemogu�eno."

#: ../../standalone/drakgw_.c:144
msgid "Internet Connection Sharing currently disabled"
msgstr "Deljenje internet konekcije je trenutno onemogu�eno"

#: ../../standalone/drakgw_.c:145
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno.\n"
"Trenutno je onemogu�eno.\n"
"\n"
"�ta �elite da uradite?"

#: ../../standalone/drakgw_.c:149
msgid "enable"
msgstr "omogu�i"

#: ../../standalone/drakgw_.c:156
msgid "Enabling servers..."
msgstr ">Omogu�avam servisi..."

#: ../../standalone/drakgw_.c:161
msgid "Internet connection sharing is now enabled."
msgstr "Deljenje internet konekcije je omogu�eno."

#: ../../standalone/drakgw_.c:182
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Va� kompjuter mo�ete podesiti za deljenje njegove Internet konekcije.\n"
"sa ovom opcijom, drugi kompjuteri na va�oj lokalnoj mre�i �e mo�i da "
"koristeInternet konekciju sa ovog kompjutera.\n"
"\n"
"Napomena: potrebana vam je mre�na kartica da bi podesili lokalnu mre�u"
"(LAN).\n"
"\n"
"Da li �elite da podesite deljenje Internet konekcije ?"

#: ../../standalone/drakgw_.c:208
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interfejs %s (koriste�i modul %s)"

#: ../../standalone/drakgw_.c:209
#, c-format
msgid "Interface %s"
msgstr "Interfejs %s"

#: ../../standalone/drakgw_.c:217
msgid "No network adapter on your system!"
msgstr "Nema mre�nog adaptera u va�em sistemu !"

#: ../../standalone/drakgw_.c:218
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Nije detektovana nijedna mre�na kartica. Pokrenite alat za konfigurisanje "
"hardvera."

#: ../../standalone/drakgw_.c:224
msgid "Network interface"
msgstr "Mre�ni interfejs"

#: ../../standalone/drakgw_.c:225
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Postoji samo jedan konfigurisan mre�ni adapter na va�em sistemu:\n"
"\n"
"%s\n"
"\n"
"Sada podeavam va�u lokalnu mre�u sa ovim adapterom."

#: ../../standalone/drakgw_.c:234
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "Izaberite koji �e mre�ni adapter biti kori�ten za LANmre�u."

#: ../../standalone/drakgw_.c:243
msgid ""
"Warning, the network adapter is already configured. I will reconfigure it."
msgstr ""
"Upozorenje, mre�ni adapter je ve� konfigurisan. Ja �u ga sada "
"rekonfigurisati."

#: ../../standalone/drakgw_.c:254
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n"

#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
msgid "Firewalling configuration detected!"
msgstr "Detektovana Firewalling konfiguracija"

#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Upozorenje ! Postoje�a firewalling konfiguracija je detektovana. Mo�da�e "
"biti potrebno ru�no pode�avanje nakon instalacije."

#: ../../standalone/drakgw_.c:277
msgid "Configuring..."
msgstr "Konfiguracija u toku..."

#: ../../standalone/drakgw_.c:278
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..."

#: ../../standalone/drakgw_.c:311
#, c-format
msgid "Problems installing package %s"
msgstr "Problemi pri instalaciji %s paketa"

#: ../../standalone/drakgw_.c:600
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Sve je pode�eno.\n"
"Sada mo�ete deliti Internet konekciju sa drugim kompjuterima na va�oj "
"lokalnoj mre�i  (LAN), koriste�i automatsku mre�nu konfiguraciju (DHCP)."

#: ../../standalone/drakgw_.c:617
msgid "The setup has already been done, but it's currently disabled."
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno ali je trenutno "
"onemogu�eno."

#: ../../standalone/drakgw_.c:618
msgid "The setup has already been done, and it's currently enabled."
msgstr ""
"Pode�avanje deljenja internet konekcije je ve� zavr�eno i trenutno je "
"omogu�eno."

#: ../../standalone/drakgw_.c:619
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Do sada Deljenje internet konekcije nije pode�avano."

#: ../../standalone/drakgw_.c:624
msgid "Internet connection sharing configuration"
msgstr "Konfiguracija Deljenja Internet konekcije"

#: ../../standalone/drakgw_.c:631
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Dobrodo�li u alat za pode�avanje Deljenja Internet konekcije\n"
"%s\n"
"\n"
"Kliknite na Podesi (Configure) da bi pokrenuli pode�avanje."

#: ../../standalone/draknet_.c:79
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Pode�avanje mre�e (%d adaptera)"

#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/draknet_.c:94
msgid "Del profile..."
msgstr "Ukloni profil..."

#: ../../standalone/draknet_.c:100
msgid "Profile to delete:"
msgstr "Profil za brisanje:"

#: ../../standalone/draknet_.c:128
msgid "New profile..."
msgstr "Novi profil..."

#: ../../standalone/draknet_.c:134
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/draknet_.c:160
msgid "Hostname: "
msgstr "Ime hosta:"

#: ../../standalone/draknet_.c:167
msgid "Internet access"
msgstr "Internet pristup"

#: ../../standalone/draknet_.c:180
msgid "Type:"
msgstr "Tip:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Gateway:"
msgstr "Gateway:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Interface:"
msgstr "Interfejs:"

#: ../../standalone/draknet_.c:192
msgid "Status:"
msgstr "Status:"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Connected"
msgstr "Konektovan"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Not connected"
msgstr "Nije konektovan"

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Connect..."
msgstr "Konektovanje..."

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Disconnect..."
msgstr "Diskonektovan..."

#: ../../standalone/draknet_.c:215
msgid "Starting your connection..."
msgstr "Startujem konekciju..."

#: ../../standalone/draknet_.c:223
msgid "Closing your connection..."
msgstr "Zatvaram konekciju..."

#: ../../standalone/draknet_.c:228
msgid ""
"The connection is not closed.\n"
"Try to do it manually by running\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"in root."
msgstr ""
"Konekcija je zatvorena.\n"
"Poku�ajte da to uradite ru�no pokretanjem\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"kao root."

#: ../../standalone/draknet_.c:231
msgid "The system is now disconnected."
msgstr "Sistem je sada diskonektovan."

#: ../../standalone/draknet_.c:243
msgid "Configure Internet Access..."
msgstr "Podesi Internet pristup..."

#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
msgid "LAN configuration"
msgstr "LAN konfiguracija"

#: ../../standalone/draknet_.c:255
msgid "Driver"
msgstr "Drajver"

#: ../../standalone/draknet_.c:255
msgid "Interface"
msgstr "Interfejs"

#: ../../standalone/draknet_.c:255
msgid "Protocol"
msgstr "Protokol"

#: ../../standalone/draknet_.c:255
#, fuzzy
msgid "State"
msgstr "Status:"

#: ../../standalone/draknet_.c:267
msgid "Configure Local Area Network..."
msgstr "Podesi lokalni mre�u..."

#: ../../standalone/draknet_.c:279
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/draknet_.c:306
msgid "Apply"
msgstr "Promeni"

#: ../../standalone/draknet_.c:325
msgid "Please Wait... Applying the configuration"
msgstr "Samo momenat... primena konfiguracije"

#: ../../standalone/draknet_.c:428
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Vi nemate ni jedan interfejs koji je pode�en.\n"
"Morate ih prvo podesite klikom na 'Configure'"

#: ../../standalone/draknet_.c:450
msgid "LAN Configuration"
msgstr "LAN konfiguracija"

#: ../../standalone/draknet_.c:457
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/draknet_.c:463
msgid "Boot Protocol"
msgstr "Startni(Boot) protokol"

#: ../../standalone/draknet_.c:464
msgid "Started on boot"
msgstr "Pokrenuto pri startanju"

#: ../../standalone/draknet_.c:465
msgid "DHCP client"
msgstr "DHCP klijent"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "activate now"
msgstr "Aktiviraj"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "desactivate now"
msgstr "Aktiviraj"

#: ../../standalone/draknet_.c:538
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Vi nemate ni jednu pode�enu Internet konekciju.\n"
"Kreirajte je klikom na 'Configure'"

#: ../../standalone/draknet_.c:562
msgid "Internet connection configuration"
msgstr "Konfiguracija Internet konekcija"

#: ../../standalone/draknet_.c:566
msgid "Internet Connection Configuration"
msgstr "Konfiguracija Internet Konekcija"

#: ../../standalone/draknet_.c:575
msgid "Connection type: "
msgstr "Tip konekcije: "

#: ../../standalone/draknet_.c:581
msgid "Parameters"
msgstr "Parametri"

#: ../../standalone/draknet_.c:608
msgid "Ethernet Card"
msgstr "Mre�na kartica"

#: ../../standalone/draknet_.c:609
msgid "DHCP Client"
msgstr "DHCP klijent"

#: ../../standalone/draksec_.c:21
msgid "Welcome To Crackers"
msgstr "Dobro�li kod Krakera"

#: ../../standalone/draksec_.c:22
msgid "Poor"
msgstr "Bedna"

#: ../../standalone/draksec_.c:26
msgid "Paranoid"
msgstr "Paranoidna"

#: ../../standalone/draksec_.c:29
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Na ovom nivou treba obratiti pa�nju. On pravi va� sistem lak�im\n"
"za upotrebu, ali i  veoma osetljivim: ne sme biti kori�ten na ma�ini\n"
"koja je povezana sa drugim ma�inama ili na internet. Ovde ne postoji\n"
"pristup sa lozinkom."

#: ../../standalone/draksec_.c:32
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Lozinke su sada omogu�ene, ali se i dalje ne preporu�uje da se koristi\n"
"kao mre�ni ra�unar."

#: ../../standalone/draksec_.c:33
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"Od nekoliko pobolj�anja na ovom sigurnosom nivou, najzna�ajniji\n"
"je pove�an broj sigurnosnih upozorenja i provera."

#: ../../standalone/draksec_.c:35
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"Ovo je standardno sigurnosno okru�enje preporu�eno za ra�unare\n"
"koji  �e biti  kor��eni za vezu sa Internetom ili kao klijent.\n"
"Ne postoje sigurnosne provere."

#: ../../standalone/draksec_.c:37
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"Sa ovim sigurnosnim nivoom, kori��enje ovog sistema kao servera\n"
"postaje mogu�e. Sigurnost je sada dovoljno velika za kori��enje\n"
"ma�ine za server koji prihvata konekcije brojnih klijenata."

#: ../../standalone/draksec_.c:40
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"Uklju�ujete nivo 4 opcija, ali je sada sistem potpuno zatvoren.\n"
"Sigurnosne opcije su maksimalne."

#: ../../standalone/draksec_.c:65
#, fuzzy
msgid "Security level"
msgstr "Pode�avanje sigurnosnog nivoa"

#: ../../standalone/draksec_.c:67
#, fuzzy
msgid "Use libsafe for servers"
msgstr "Opcije za server"

#: ../../standalone/draksec_.c:68
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: ../../standalone/draksec_.c:72
msgid "Setting security level"
msgstr "Pode�avanje sigurnosnog nivoa"

#: ../../standalone/drakxconf_.c:47
msgid "Control Center"
msgstr "Kontrolni Centar"

#: ../../standalone/drakxconf_.c:48
msgid "Choose the tool you want to use"
msgstr "Izaberite alat koje �elite da koristite"

#: ../../standalone/keyboarddrake_.c:16
msgid "usage: keyboarddrake [--expert] [keyboard]\n"
msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"

#: ../../standalone/keyboarddrake_.c:36
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Da li �elite da BackSpace da vrati Delete u konzolu?"

#: ../../standalone/livedrake_.c:23
msgid "Change Cd-Rom"
msgstr "Promeni Cd-Rom"

#: ../../standalone/livedrake_.c:24
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Ubacite va� Instalacioni CD u pogon i pritisnite OK kada ste spremni.\n"
"Ukoliko ga nemate pritisnite Poni�ti da bi izbegli live upgrade."

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr "Ne mogu da startujem live upgrade !!!\n"

#: ../../standalone/mousedrake_.c:58
msgid "no serial_usb found\n"
msgstr "nije prona�en serial_usb\n"

#: ../../standalone/mousedrake_.c:62
msgid "Emulate third button?"
msgstr "Da imitiram rad 3 tastera?"

#: ../../standalone/tinyfirewall_.c:29
msgid "Firewalling Configuration"
msgstr "Firewalling konfiguracija"

#: ../../standalone/tinyfirewall_.c:42
msgid "Firewalling configuration"
msgstr "Firewalling konfiguracija"

#: ../../standalone/tinyfirewall_.c:77
msgid ""
"Firewalling\n"
"\n"
"You already have set up a firewall.\n"
"Click on Configure to change or remove the firewall"
msgstr ""
"Firewalling\n"
"\n"
"Vi ste ve� podesili firewall.\n"
"Kliknite na Podesi(Configure) da bi izmenili ili uklonili firewall"

#: ../../standalone/tinyfirewall_.c:81
msgid ""
"Firewalling\n"
"\n"
"Click on Configure to set up a standard firewall"
msgstr ""
"Firewalling\n"
"\n"
"Kliknite na Podesi(Configure) da bi podesili standardni firewall"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "Izaberite jezik"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "Izaberite inst.klasu"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "Detekcija hard diska"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Pode�avanje mi�a"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "Izaberi tastaturu"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "Sigurnost"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "Podesi datote�ne sisteme"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Formatiraj particije"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "Paketi za instalaciju"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "Instaliraj sistem"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Dodaj korisnika"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "Podesi mre�u"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Podesi servise"

#: ../../steps.pm_.c:30
msgid "Create a bootdisk"
msgstr "Napravi startni disk"

#: ../../steps.pm_.c:32
msgid "Install bootloader"
msgstr "Instaliraj starter"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Konfigurisanje X-a"

#: ../../steps.pm_.c:34
msgid "Exit install"
msgstr "Izlaz iz instalacije"

#: ../../tinyfirewall.pm_.c:9
msgid ""
"tinyfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"Mali firewall konfigurator\n"
"\n"
"On konfiguri�e li�ni firewall za ovu Mandrake Linux ma�inu.\n"
"Za mo�no firewall re�enje, pogledajte\n"
"specijalizovanu MandrakeSecurity Firewall distribuciju."

#: ../../tinyfirewall.pm_.c:14
msgid ""
"We'll now ask you questions about which services you'd like to allow\n"
"the Internet to connect to.  Please think carefully about these\n"
"questions, as your computer's security is important.\n"
"\n"
"Please, if you're not currently using one of these services, firewall\n"
"it off.  You can change this configuration anytime you like by\n"
"re-running this application!"
msgstr ""
"Sada �emo vam postaviti pitanja o tome koje servise bi hteli da dozvolite\n"
"da se pove�u na Internet.  Razmislite pa�ljivo o ovome\n"
"pitanju, jer je bezbednost va�eg kompjutera va�na.\n"
"\n"
"Ukoliko trenutno ne koristite jedan od ovih servisa, uklonite firewall\n"
"sa njih.  Mo�ete promeniti ove opcije bilo kada ponovnim pokretanjem\n"
"ove aplikacije!"

#: ../../tinyfirewall.pm_.c:21
msgid ""
"Are you running a web server on this machine that you need the whole\n"
"Internet to see? If you are running a webserver that only needs to be\n"
"accessed by this machine, you can safely answer NO here.\n"
"\n"
msgstr ""
"Da li pokre�ete web server na ovoj ma�ini koji treba da bude vi�en\n"
"na celom Internetu? Ukoliko pokre�ete webserver koji treba da bude vi�en\n"
"samo sa ove ma�ine, ovde mo�ete da bezbedno odgovorite NE.\n"
"\n"

#: ../../tinyfirewall.pm_.c:26
msgid ""
"Are you running a name server on this machine? If you didn't set one\n"
"up to give away IP and zone information to the whole Internet, please\n"
"answer no.\n"
"\n"
msgstr ""
"Da li pokre�ete name server na ovoj ma�ini? Ukoliko niste podesili jo� "
"jedan\n"
"za away IP i zonske informacije za celi Internet, molim\n"
"vas da odgovorite ne.\n"
"\n"

#: ../../tinyfirewall.pm_.c:31
msgid ""
"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
"is a telnet-replacement that you might use to login. If you're using\n"
"telnet now, you should definitely switch to ssh. telnet is not\n"
"encrypted -- so some attackers can steal your password if you use\n"
"it. ssh is encrypted and doesn't allow for this eavesdropping."
msgstr ""
"Da li �elite da dozvolite Secure Shell (ssh) konekcije? Ovo\n"
"je zamena za telnet koju mo�ete koristiti za prijavu. Ukoliko koristite\n"
"telnet, trebali bi da se prebacite na ssh. Telenet nije\n"
"enkriptovan -- tako da neki napada�i mogu ukrasti lozinku ukoliko je\n"
"koristite. ssh je enkriptovan i ne dozovoljava ovakve stvari."

#: ../../tinyfirewall.pm_.c:36
msgid ""
"Do you want to allow incoming telnet connections?\n"
"This is horribly unsafe, as we explained in the previous screen. We\n"
"strongly recommend answering No here and using ssh in place of\n"
"telnet.\n"
msgstr ""
"Da li �elite da dozvolite telnet konekcije?\n"
"Ovo je u�asno nesiguno, kako smo i objasnili na prethosnom ekranu. Mi\n"
"vam preporu�ujemo da ovde odgovorite NE i da koristite ssh umesto\n"
"telnet.\n"

#: ../../tinyfirewall.pm_.c:41
msgid ""
"Are you running an FTP server here that you need accessible to the\n"
"Internet? If you are, we strongly recommend that you only use it for\n"
"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
"attackers, since FTP also uses no encryption for transferring passwords.\n"
msgstr ""
"Da li pokre�ete FTP server koji vam je potreban\n"
"za Internet? Ukoliko to radite, preporu�ujemo ga koristite samo za\n"
"Anonymous transfere. Bilo koja lozinka poslata preko FTP mo�e biti\n"
"meta napada�a, po�to  FTP tako�e koristi nekritovane lozinke.\n"

#: ../../tinyfirewall.pm_.c:46
msgid ""
"Are you running a mail server here? If you're sending you \n"
"messages through pine, mutt or any other text-based mail client,\n"
"you probably are.  Otherwise, you should firewall this off.\n"
"\n"
msgstr ""
"Da li pokre�ete mail server? Ukoliko �aljete poruke preko\n"
"pine, mutt ili nekog drugog tekstualnog mail klijenta,\n"
"onda to verovatno koristite.  Ina�e, trebali bi da uklonite firewall za "
"ovo.\n"
"\n"

#: ../../tinyfirewall.pm_.c:51
msgid ""
"Are you running a POP or IMAP server here? This would\n"
"be used to host non-web-based mail accounts for people via \n"
"this machine.\n"
"\n"
msgstr ""
"Da li pokre�ete POP ili IMAP server? Ovo bi koristili \n"
"za host-ovanje non-web-baziranih  mail ra�una za ljude preko\n"
"ove ma�ine.\n"
"\n"

#: ../../tinyfirewall.pm_.c:56
msgid ""
"You appear to be running a 2.2 kernel.  If your network IP\n"
"is automatically set by a computer in your home or office \n"
"(dynamically assigned), we need to allow for this.  Is\n"
"this the case?\n"
msgstr ""
"Izgleda da koristite 2.2 kernel.  Ukoliko je va� mre�ni IP\n"
"automatski pode�en za kompjuter u va�oj ku�i ili na poslu \n"
"(dodeljeno dinami�ki), treba da ga omogu�imo za ovo.  Da\n"
"li je ovo u pitanju?\n"

#: ../../tinyfirewall.pm_.c:61
msgid ""
"Is your computer getting time syncronized to another computer?\n"
"Mostly, this is used by medium-large Unix/Linux organizations\n"
"to synchronize time for logging and such.  If you're not part\n"
"of a larger office and haven't heard of this, you probably \n"
"aren't."
msgstr ""
"Da li va� kompjuter dobija vreme sinhronizovano sa drugim kompjuterom?\n"
"Uglavnom se ovo koristi na srednjim-velikim Unix/Linux organizacijama\n"
"radi sinhronizacije vremena prijave ili za sli�ne stvari.  Ukoliko niste "
"deo\n"
"velike firme ili niste �uli za ovo, onda zaobi�ite \n"
"ovo."

#: ../../tinyfirewall.pm_.c:66
msgid ""
"Configuration complete.  May we write these changes to disk?\n"
"\n"
"\n"
"\n"
msgstr ""
"Konfiguracija zavr�ena. Da li da zapi�emo ove izmene na disk?\n"
"\n"
"\n"
"\n"

#: ../../tinyfirewall.pm_.c:82
#, c-format
msgid "Can't open %s: %s\n"
msgstr "Ne mogu da otvorim  %s: %s\n"

#: ../../tinyfirewall.pm_.c:84
#, c-format
msgid "Can't open %s for writing: %s\n"
msgstr "Ne mogu da otvorim %s radi upisa: %s\n"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Server, Web/FTP"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Mre�ni kompjuter, (klijent)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, SSH server"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Office"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome radna stanica"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Alati za Palm Pilot ili Visor"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Radna stanica"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Server, Firewall/Router"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Office programi: tekst procesori (kword, abiword), tabele (kspread, "
"gnumeric), pdf preglednici, itd"

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Audio alati: mp3 ili midi plejeri,mikseri, itd"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE padna stanica"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimedija - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Set alata za el.po�tu, vesti, web, transfer datoteka, ili chat"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Server,Baze podataka"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Alati za lako konfigurisanje kompjutera"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimedija - Zvuk"

#: ../../share/compssUsers:999
msgid "Utilities"
msgstr "Alati"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentacija"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konzolni alati"

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internet stanica"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimedijalna stanica"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "LAN konfiguracija"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Jo� grafi�kih okru�enja (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop okru�enje, osnovno grafi�ko okru�enje sa kolekcijom prate�ih alata"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Grafi�ko Okru�enje"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Razvojna"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "Alati za kreiranje i pr�enje CDa"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Radna(Office) stanica"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Grafi�ki programi kao �to je Gimp"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS "

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C i C++ razvojne biblioteke, programi  i propratne datoteke"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Mre�ni Server"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr "Server, El.po�ta/Groupware/Vesti"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Stanica za igru"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Video plejeri i editori"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimedija - Grafika"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Skup alata za �itanje i slanje el.po�te i vesti (pine, mutt, tin..) i za "
"pretra�ivanje Interneta"

#: ../../share/compssUsers:999
msgid "Archiving, emulators, monitoring"
msgstr "Arhiviranje, emulatori, monitoring"

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Li�ne finansije"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Grafi�ka okru�enja za setom korisni�kNFS server, SMB server, Proxy serverNFS "
"server, SMB server, Proxy serverih aplikacija i desktopalata"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klijenti za razli�ite protokole uklju�uju�i i ssh"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet gateway"
msgstr "Internet pristup"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Programi za pu�tanje zvuka i videa"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Drugi grafi�ki desktopovi"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "editori,�elovi, alati za datoteke, terminali"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "Programi za upravljanje va�im finansijama, kao �to je gnucash"

#: ../../share/compssUsers:999
msgid "Games"
msgstr "Igre"

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Upravljanje privatnim informacijama"

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedija - CD pr�enje"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Nau�na radna stanica"

#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
#~ msgstr "ne mogu otvoriti /etc/sysconfig/autologin za �itanje: %s"

#~ msgid "Do you want to restart the network"
#~ msgstr "Da li ho�ete da restartujete mre�e?"

#~ msgid ""
#~ "\n"
#~ "Do you agree?"
#~ msgstr ""
#~ "\n"
#~ "Da li se sla�ete?"

#~ msgid "I'm about to restart the network device:\n"
#~ msgstr "Sadam treba da se restartuje mre�ni interfejs:\n"

#~ msgid "I'm about to restart the network device %s. Do you agree?"
#~ msgstr "Sada treba da se restartuje mre�ni ure�aj  %s. Da li se sla�ete ?"

#, fuzzy
#~ msgid ""
#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
#~ msgstr ""
#~ "Ukoliko nije druga�ije odre�eno, oubi�ajen izbor je \"/dev/hda\"\n"
#~ "(master disk na primarnom kanalu) ili \"/dev/sda\" (first SCSI disk)."

#, fuzzy
#~ msgid ""
#~ "The following printers are configured.\n"
#~ "You can add some more or modify the existing ones."
#~ msgstr ""
#~ "Ovo su postavljne opcije.\n"
#~ "Mo�ete dodati nove ili izmeniti stare."

#, fuzzy
#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
#~ msgstr "Vreme konekcije: "

#, fuzzy
#~ msgid "Could not set \"%s\" as the default printer!"
#~ msgstr "Izaberite default (osnovnog) korisnika:"

#~ msgid "Spooler: "
#~ msgstr "Sistem za �tampanje (Spooler): "

#~ msgid "Test the mouse here."
#~ msgstr "Sada testirajte mi�a"

#~ msgid "Press next to continue."
#~ msgstr "Pritisnite \"Slede�i\" da bi nastavili "

#~ msgid ""
#~ "Please choose your preferred language for installation and system usage."
#~ msgstr ""
#~ "Izaberite vama odgovaraju�i jezik za instaliranje i kori��enje sistema."

#~ msgid ""
#~ "You need to accept the terms of the above license to continue "
#~ "installation.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Accept\" if you agree with its terms.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
#~ "will end without modifying your current\n"
#~ "configuration."
#~ msgstr ""
#~ "Morate da prihvatite uslove licence da bi nastavili instalaciju.\n"
#~ "\n"
#~ "\n"
#~ "Molim vas da pritisnete na \"Prihvatam\" ukoliko se sla�ete sa uslovima.\n"
#~ "\n"
#~ "\n"
#~ "Molim vas da pritisnete na \"Odbijam\" ukoliko se ne sla�ete sa uslovima."
#~ "Instalacija�e biti zav�ena bez imakvih promena"

#~ msgid "Choose the layout corresponding to your keyboard from the list above"
#~ msgstr "Izaberite tip komunikacije sa tastaturom od gore navedenih"

#~ msgid ""
#~ "If you wish other languages (than the one you choose at\n"
#~ "beginning of installation) will be available after installation, please "
#~ "chose\n"
#~ "them in list above. If you want select all, you just need to select \"All"
#~ "\"."
#~ msgstr ""
#~ "If you wish other languages (than the one you choose at\n"
#~ "beginning of installation) will be available after installation, please "
#~ "chose\n"
#~ "them in list above. If you want select all, you just need to select \"All"
#~ "\"."

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!"
#~ msgstr ""
#~ "Izaberite:\n"
#~ "\n"
#~ " - Sa pode�avanjima (Customized): Ukoliko ste upoznati sa Linux-om mo�i "
#~ "�ete\n"
#~ "da izaberete normal,development ili server mod instalacije.\n"
#~ "Izaberite \"Normal\" instalaciju pri uobi�ajenom kori��enju ra�unara\n"
#~ "Mo�ete izabrati \"Development\" instalaciju ukoliko �ete se prvenstveno\n"
#~ "razvojem softvera, ili \"Server\" ukoliko �elite da postavite standardnu\n"
#~ "server ma�inu (za po�tu, �tampanje...)\n"
#~ "\n"
#~ "\n"
#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i �elite izuzetno\n"
#~ "podesivu instalaciju onda je ovo pravi mod za vas. Mo�i �ete izabrati\n"
#~ "kori��enje sistema kao \"Preporu�eno\"."

#~ msgid ""
#~ "You must now define your machine usage. Choices are:\n"
#~ "\n"
#~ "* Workstation: this the ideal choice if you intend to use your machine "
#~ "primarily for everyday use, at office or\n"
#~ "  at home.\n"
#~ "\n"
#~ "\n"
#~ "* Development: if you intend to use your machine primarily for software "
#~ "development, it is the good choice. You\n"
#~ "  will then have a complete collection of software installed in order to "
#~ "compile, debug and format source code,\n"
#~ "  or create software packages.\n"
#~ "\n"
#~ "\n"
#~ "* Server: if you intend to use this machine as a server, it is the good "
#~ "choice. Either a file server (NFS or\n"
#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
#~ "authentication server (NIS), a database\n"
#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
#~ "etc.) to be installed."
#~ msgstr ""
#~ "Sada morate definisati za �ta �ete koristiti va�u ma�inu.Va� izbor je:\n"
#~ "\n"
#~ "  - Radna stanica : ovo je idealan izbor ukoliko nameravate da koristite "
#~ "va�e ma�inuuglavnom za svakodnevnu upotrebu  (obrada teksta,tablice, "
#~ "grafika itd).\n"
#~ "\n"
#~ "\n"
#~ "  - Razvojna stanica: samo joj  ime ka�e. Izaberite ovo ukoliko imate "
#~ "nameru da va�u ma�inu uglavnom koristite za razvoj softvera. Tada �e te "
#~ "imati kompletnu\n"
#~ "kolekciju softvera  za kompajliranje, debagiranje i formatiranje\n"
#~ "izvornog koda, ili za kreiranje softverskoih paketa.\n"
#~ "\n"
#~ "\n"
#~ "  - Server: izaberite ovo ukoliko imate nameru da Mandrake Linux\n"
#~ "koristite kao server. Ili kao fajl server (NFS ili  SMB),\n"
#~ "ili server protokol za �tampu(Unix' lp (Line Printer ili  Windows  SMB\n"
#~ "�tampanje) ili  autenti�ni server (NIS), ili kao server za bazu  podataka "
#~ "itd.\n"
#~ "Kao takav, on ne�e imati instaliran luksuz (KDE, GNOME...) ."

#~ msgid ""
#~ "You may now select the group of packages you wish to\n"
#~ "install or upgrade.\n"
#~ "\n"
#~ "\n"
#~ "DrakX will then check whether you have enough room to install them all. "
#~ "If not,\n"
#~ "it will warn you about it. If you want to go on anyway, it will proceed "
#~ "onto the\n"
#~ "installation of all selected groups but will drop some packages of "
#~ "lesser\n"
#~ "interest. At the bottom of the list you can select the option \n"
#~ "\"Individual package selection\"; in this case you will have to browse "
#~ "through\n"
#~ "more than 1000 packages..."
#~ msgstr ""
#~ "Sada mo�ete izabrati grupu paketa koje �elite\n"
#~ "da instalirate. ili a�urirate.\n"
#~ "\n"
#~ "\n"
#~ "DrakX �e zatim proveriti da li imate mesta za njihovo instaliranje."
#~ "Ukoliko nema,\n"
#~ "on �e vas upozoriti na to. Ukoliko �elite da nastavite, nastavi�e se "
#~ "instalacija\n"
#~ "svih odabranih grupa ali �e neki paketi od manjeg zna�aja biti "
#~ "izostavljeni.Na kraju liste\n"
#~ "mo�ete izabrati opcijy \"Pojedina�na selekcija paketa\";\n"
#~ "U tom slu�aju mora�ete birati izme�u vi�e od 1000 paketa..."

#~ msgid ""
#~ "You can now choose individually all the packages you\n"
#~ "wish to install.\n"
#~ "\n"
#~ "\n"
#~ "You can expand or collapse the tree by clicking on options in the left "
#~ "corner of\n"
#~ "the packages window.\n"
#~ "\n"
#~ "\n"
#~ "If you prefer to see packages sorted in alphabetic order, click on the "
#~ "icon\n"
#~ "\"Toggle flat and group sorted\".\n"
#~ "\n"
#~ "\n"
#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
#~ "dependencies\". If you do this, note that unselecting one package may "
#~ "silently\n"
#~ "unselect several other packages which depend on it."
#~ msgstr ""
#~ "Sada mo�ete ru�no izabrati sve pakete koje\n"
#~ "�elite da instalirate.\n"
#~ "\n"
#~ "\n"
#~ "Mo�ete da ra�iriti ili skupiti stablo klikaju�i na opcije koje se nalazeu "
#~ "uglu\n"
#~ "prozora sa paketima.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko �elite da vidite pakete sortirane po abecednom redu, kliknite na "
#~ "ikonu\n"
#~ "\"Postavi ravno i grupno sortirano\".\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko ne �elite da budete upozoreni na zavisnosti, kliknite na "
#~ "\"Automatske\n"
#~ "zavisnosti\". Ukoliko ovo �elite, zapamtite da deselektovanje jednog "
#~ "paketa mo�e neprime�eno\n"
#~ "da deselektuje i nekoliko drugih paketa koji zavise od njega."

#~ msgid ""
#~ "If you have all the CDs in the list above, click Ok. If you have\n"
#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
#~ "them,\n"
#~ "then click Ok."
#~ msgstr ""
#~ "Ukoliko imate sve gore navedene CD-ove, kliknite na Ok.\n"
#~ "Ukoliko nemate nijedan CD, kliknite na Cancel.\n"
#~ "Ako vam nedostaju  neki CD-ovi, deselektujete ih,a onda,\n"
#~ "kliknite na Ok."

#~ msgid ""
#~ "You can now test your mouse. Use buttons and wheel to verify\n"
#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
#~ "another\n"
#~ "driver.\n"
#~ "\n"
#~ "\n"
#~ "If you are installing on an Apple machine with a 1-button mouse, you "
#~ "will\n"
#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
#~ "full\n"
#~ "functionality of the mouse in both the Linux console and the X Window "
#~ "GUI.\n"
#~ "\n"
#~ "\n"
#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
#~ "take\n"
#~ "care of mapping your mouse hardware correctly."
#~ msgstr ""
#~ "Sada mo�ete da testirate va�eg mi�a. Koristite tastere i to�kins and "
#~ "wheel to verify\n"
#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
#~ "another\n"
#~ "driver.\n"
#~ "\n"
#~ "\n"
#~ "If you are installing on an Apple machine with a 1-button mouse, you "
#~ "will\n"
#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
#~ "full\n"
#~ "functionality of the mouse in both the Linux console and the X Window "
#~ "GUI.\n"
#~ "\n"
#~ "\n"
#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
#~ "take\n"
#~ "care of mapping your mouse hardware correctly."

#~ msgid ""
#~ "If you wish to connect your computer to the Internet or\n"
#~ "to a local network please choose the correct option. Please turn on your "
#~ "device\n"
#~ "before choosing the correct option to let DrakX detect it automatically.\n"
#~ "\n"
#~ "\n"
#~ "If you do not have any connection to the Internet or a local network, "
#~ "choose\n"
#~ "\"Disable networking\".\n"
#~ "\n"
#~ "\n"
#~ "If you wish to configure the network later after installation or if you "
#~ "have\n"
#~ "finished to configure your network connection, choose \"Done\"."
#~ msgstr ""
#~ "Ukoliko �elite da konektujte kompjyter na Internet ili\n"
#~ "na lokalnu mre�u izaberite pravu opciju. molim Vas da uklju�iteure�aj\n"
#~ "pre biranja prave opcije da bi dozvolili DrakX-u da ga auomatski "
#~ "detektuje.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko nemate vezu sa Internetom ili lokalnom mre�om, izaberite\n"
#~ "\"Isklju�i mre�u\".\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko �elite da kasnije uradite konfiguraciju (nakon instalacije)ili "
#~ "ste\n"
#~ "zavr�ili konfigurisanje, izaberite \"Zavr�eno\"."

#~ msgid ""
#~ "No modem has been detected. Please select the serial port on which it is "
#~ "plugged.\n"
#~ "\n"
#~ "\n"
#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
#~ "Windows) is called \"ttyS0\" under Linux."
#~ msgstr ""
#~ "Nijedam modem nije detektovan. Izaberite serijski port na kojem jemodem "
#~ "priklju�en.\n"
#~ "\n"
#~ "\n"
#~ "Da bi shvatili, prvi serijski portserial port (koji se zove \"COM1\" pod "
#~ "Microsoft\n"
#~ "Windows-om) se zove \"ttyS0\" pod Linux-om."

#~ msgid ""
#~ "You may now enter dialup options. If you don't know\n"
#~ "or are not sure what to enter, the correct informations can be obtained "
#~ "from\n"
#~ "your Internet Service Provider. If you do not enter the DNS (name "
#~ "server)\n"
#~ "information here, this information will be obtained from your Internet "
#~ "Service\n"
#~ "Provider at connection time."
#~ msgstr ""
#~ "Sada mo�ete uneti dialup postavke. Ukoliko ne znate ili \n"
#~ "ili niste sigurni �ta da unesete, prave informacije mo�ete dobitiod\n"
#~ "va�eg Internet provajdera. Ukoliko ne unesete DNS (ime servera)\n"
#~ "informaciju sada,ovu informaciju mo�ete imati kada se konektujetena "
#~ "servis\n"
#~ "va�eg Internet provajdera."

#~ msgid ""
#~ "If your modem is an external modem, please turn on it now to let DrakX "
#~ "detect it automatically."
#~ msgstr ""
#~ "Ukoliko imate eksterni modem uklju�ite ga, da bi DrakX mogao automatski "
#~ "da ga detektuje."

#~ msgid "Please turn on your modem and choose the correct one."
#~ msgstr "Uklju�ite va� modem i izaberite pravi"

#~ msgid ""
#~ "If you are not sure if informations above are\n"
#~ "correct or if you don't know or are not sure what to enter, the correct\n"
#~ "informations can be obtained from your Internet Service Provider. If you "
#~ "do not\n"
#~ "enter the DNS (name server) information here, this information will be "
#~ "obtained\n"
#~ "from your Internet Service Provider at connection time."
#~ msgstr ""
#~ "Ukoliko niste sigurni da su gore navedene informacije\n"
#~ "ispravne ili niste sigurni �ta treba da unesete, prave\n"
#~ "informacije mo�ete dobaviti od va�eg Internet provajdera. Ukoliko ovdene\n"
#~ "unsete DNS (ime servera) informacije, ovu informaciju mo�etedobaviti\n"
#~ "od va�eg Internet provajdera kada se konektujete."

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, the correct informations can "
#~ "be\n"
#~ "obtained from your Internet Service Provider."
#~ msgstr ""
#~ "Sada mo�ete uneti ime host-a ukoliko je potrebno. Ukoliko niste sigurni "
#~ "�ta da unesete,\n"
#~ "ispravne informacije �ete prona�i kod va�eg ISP-a."

#~ msgid ""
#~ "You may now configure your network device.\n"
#~ "\n"
#~ "   * IP address: if you don't know or are not sure what to enter, ask "
#~ "your network administrator.\n"
#~ "     You should not enter an IP address if you select the option "
#~ "\"Automatic IP\" below.\n"
#~ "\n"
#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
#~ "know or are not sure what to enter,\n"
#~ "     ask your network administrator.\n"
#~ "\n"
#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
#~ "this option. If selected, no value is needed in\n"
#~ "    \"IP address\". If you don't know or are not sure if you need to "
#~ "select this option, ask your network administrator."
#~ msgstr ""
#~ "Sada mo�ete podesiti mre�nu karticu:\n"
#~ "\n"
#~ " - IP adresa: ukoliko je ne znate, kontaktirajte mre�nog administratora "
#~ "ili ISP.\n"
#~ "\n"
#~ "\n"
#~ " - Mre�na maska: \"255.255.255.0\" je ve�inom dobar izbor. Ukoliko niste\n"
#~ "sigurni, kontaktirajte mre�nog administratora ili ISP.\n"
#~ "\n"
#~ "\n"
#~ " - Automatski IP: ukoliko va�a mre�a koristi bootp ili dhcp protokole,\n"
#~ "izaberite ovu opciju. Ukoliko je selektovana, nije potrebna vrednost u\n"
#~ "\"IP adresa\". Ukoliko niste sigurni, kontaktirajte mre�og administratora "
#~ "ili ISP."

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, ask your network administrator."
#~ msgstr ""
#~ "Sada mo�ete uneti ime host-a ukoliko je potrebno. Ukoliko niste sigurni "
#~ "�ta da unesete,\n"
#~ "sigurni kontaktirajte va�eg administratora."

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, leave blank."
#~ msgstr ""
#~ "Sada mo�ete uneti ime host-a ukoliko je potrebno.\n"
#~ "Ukoliko niste sigurni �ta da unesete, ostaite prazno."

#~ msgid ""
#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
#~ "correct information can be obtained from your ISP."
#~ msgstr ""
#~ "Sada unosite dialup opcije. Ukoliko niste sigurni �ta da unesete,\n"
#~ "ispravne informacije �ete prona�i kod va�eg ISP."

#~ msgid ""
#~ "If you will use proxies, please configure them now. If you don't know if\n"
#~ "you should use proxies, ask your network administrator or your ISP."
#~ msgstr ""
#~ "Ukoliko koristite proksije, konfiguri�ite ih sada. Ukoliko ne znate\n"
#~ "da li �ete ih koristiti, konsultujte mre�og administratora ili ISP."

#~ msgid ""
#~ "You can install cryptographic package if your internet connection has "
#~ "been\n"
#~ "set up correctly. First choose a mirror where you wish to download "
#~ "packages and\n"
#~ "after that select the packages to install.\n"
#~ "\n"
#~ "\n"
#~ "Note you have to select mirror and cryptographic packages according\n"
#~ "to your legislation."
#~ msgstr ""
#~ "Mo�ete instalirati kriptografski paket ukoliko je internet konekcija\n"
#~ "pravilno pode�ena. Prvo izaberite prostor gde �ete download-ti pakete\n"
#~ "i nakon toga izabrati pakete koje �ete instalirati.\n"
#~ "\n"
#~ "\n"
#~ "Morate izabrati mirror i kripto paket\n"
#~ "vode�i ra�una o zakonima."

#~ msgid "You can now select your timezone according to where you live."
#~ msgstr ""
#~ "Sada mo�ete podesiti vremensku zonu u zavisnosti od mesta gde �ivite"

#~ msgid ""
#~ "You can configure a local printer (connected to your computer) or remote\n"
#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
#~ msgstr ""
#~ "Mo�ete podesiti lokalni �tampa� (koji je povezan na kompjuter) ili "
#~ "udaljeni\n"
#~ "�tampa� (kojem mo�ete pristupiti preko Unix, Netware ili  Microsoft "
#~ "Windows mre�e)."

#~ msgid ""
#~ "If you wish to be able to print, please choose one printing system "
#~ "between\n"
#~ "CUPS and LPR.\n"
#~ "\n"
#~ "\n"
#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
#~ "(CUPS\n"
#~ "means \"Common Unix Printing System\"). It is the default printing system "
#~ "in\n"
#~ "Mandrake Linux.\n"
#~ "\n"
#~ "\n"
#~ "LPR is the old printing system used in previous Mandrake Linux "
#~ "distributions.\n"
#~ "\n"
#~ "\n"
#~ "If you don't have printer, click on \"None\"."
#~ msgstr ""
#~ "Ukoliko �elite da imate mogu�nost da �tampate, morate da izaberete sistem "
#~ "za �tampanje izme�u\n"
#~ "CUPS ili LPR-a.\n"
#~ "\n"
#~ "\n"
#~ "CUPS je novi, mo�ni i fleksibilni sistem za �tampanje za Unix sisteme "
#~ "(CUPS\n"
#~ "je skra�enica za \"Common Unix Printing System\"). On je postavljen za "
#~ "default sistem za �tampanje u\n"
#~ "Mandrake Linux-u.\n"
#~ "\n"
#~ "\n"
#~ "LPR je stari sistem za �tampanje koji se koristio u prethodnim Mandrake "
#~ "Linux distribucijama.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko nemate �tampa�, kliknite na \"Nema\"."

#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these types "
#~ "requires\n"
#~ "a different setup.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select \"Local\n"
#~ "printer\".\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine, select\n"
#~ "\"Remote printer\".\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Microsoft Windows "
#~ "machine\n"
#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
#~ msgstr ""
#~ "GNU/Linux mo�e da radi sa velikim brojem �tampa�a. Svaki od tipova "
#~ "�tampa�a zahteva\n"
#~ "druga�ije pode�avanje.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko je va� �tampa� fizi�ki vezan za kompjuter, izaberite opciju  "
#~ "\"Lokalni\n"
#~ "�tampa�\".\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko �elite da pristupite �tampa�u koji se nalazi na udaljenoj Unix "
#~ "ma�ini, izaberite\n"
#~ "\"Udaljeni �tampa�\".\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko �elite da pristupite �tampa�u koji se nalazi na udaljenoj "
#~ "Microsoft Windows ma�ini\n"
#~ "(ili na Unix ma�ini koriste�i SMB protokol), izaberite \"SMB/Windows "
#~ "95/98/NT\"."

#~ msgid ""
#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
#~ "\n"
#~ "You have to enter some informations here.\n"
#~ "\n"
#~ "\n"
#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
#~ "name. So, you must have a printer named \"lp\".\n"
#~ "     If you have only one printer, you can use several names for it. You "
#~ "just need to separate them by a pipe\n"
#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
#~ "have to put it first, eg: \"My printer|lp\".\n"
#~ "     The printer having \"lp\" in its name(s) will be the default "
#~ "printer.\n"
#~ "\n"
#~ "\n"
#~ "   * Description: this is optional but can be useful if several printers "
#~ "are connected to your computer or if you allow\n"
#~ "     other computers to access to this printer.\n"
#~ "\n"
#~ "\n"
#~ "   * Location: if you want to put some information on your\n"
#~ "     printer location, put it here (you are free to write what\n"
#~ "     you want, for example \"2nd floor\").\n"
#~ msgstr ""
#~ "Molim vas da upalite �tampa� pre nego �to nastavite da bi DrakX mogao da "
#~ "ga detektuje.\n"
#~ "\n"
#~ "Ovde �ete morati da uneste neke podatke.\n"
#~ "\n"
#~ "\n"
#~ "   * Ime �tampa�a: �tampa�ev spooler koristi \"lp\" kao default ime za "
#~ "�tampa�. Dakle, morate imati �tampa� koji se zove \"lp\".\n"
#~ "     Ukoliko imate samo jedan �tampa�, mo�ete koristiti vi�e imena za "
#~ "njega. Treba samo da  ih odvojite pipe\n"
#~ "     karakterom (tj. \"|\"). Dakle, ukoliko volite ime koje ne�to i "
#~ "zna�i, morate da ga postavite na prvo mesto, na primer: \"Moj �tampa�|lp"
#~ "\".\n"
#~ "     �tampa� koji ima\"lp\" u svom imenu(nima) �e biti default �tampa�.\n"
#~ "\n"
#~ "\n"
#~ "   * Opis: ovo nije obavezna funkcija ali mo�e biti korisna ukoliko je "
#~ "vi�e �tampa�apovezano na va� kompjuter ili ukoliko �elite da dozvolite "
#~ "pristup\n"
#~ "     drugim kompjuterima na ovaj �tampa�.\n"
#~ "\n"
#~ "\n"
#~ "   * Lokacija: ukoliko �elite date neke informacije o lokaciji va�eg\n"
#~ "     �tampa�a, onda to mo�ete ovde uraditi (ovde mo�ete upisati bilo "
#~ "�ta,\n"
#~ "     na primer \"drugi sprat\").\n"

#~ msgid ""
#~ "You need to enter some informations here.\n"
#~ "\n"
#~ "\n"
#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
#~ "name. So, you need have a printer named \"lp\".\n"
#~ "    If you have only one printer, you can use several names for it. You "
#~ "just need to separate them by a pipe\n"
#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
#~ "    The printer having \"lp\" in its name(s) will be the default "
#~ "printer.\n"
#~ "\n"
#~ "  \n"
#~ "   * Spool directory: it is in this directory that printing jobs are "
#~ "stored. Keep the default choice\n"
#~ "     if you don't know what to use\n"
#~ "\n"
#~ "\n"
#~ "   * Printer Connection: If your printer is physically connected to your "
#~ "computer, select \"Local printer\".\n"
#~ "     If you want to access a printer located on a remote Unix machine, "
#~ "select \"Remote lpd printer\".\n"
#~ "\n"
#~ "\n"
#~ "     If you want to access a printer located on a remote Microsoft "
#~ "Windows machine (or on Unix machine using SMB\n"
#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
#~ "\n"
#~ "\n"
#~ "     If you want to acces a printer located on NetWare network, select "
#~ "\"NetWare\".\n"
#~ msgstr ""
#~ "Ovde morate da unesete neke informacije.\n"
#~ "\n"
#~ "\n"
#~ "   * Ime �tampa�a: �tampa�ev spooler koristi \"lp\" kao default ime "
#~ "�tampa�a. Pa tako morate da imate �tampa� sa imenom \"lp\".\n"
#~ "    Ukoliko iamte samo jedan �tampa�, mo�ete da mu date vi�e imena. Samo "
#~ "ihodovojite pipe\n"
#~ "    karakterom (tj. \"|\"). Dakle, ukoliko vi�e volite imane sa "
#~ "zna�enjem, onda ga morae staviti na prvo mesto, na primer: \"Moj �tampa�|"
#~ "lp\".\n"
#~ "    �tampa� koji ima\"lp\" u svom imenu je ujedno i default �tampa�.\n"
#~ "\n"
#~ "  \n"
#~ "   * Spool direktorijum: to je direktorijum u kojem se nalaze zadati "
#~ "poslovi za �tampanje. Zadr�ite default izbor\n"
#~ "     ukoliko ne znate �ta da koristite\n"
#~ "\n"
#~ "\n"
#~ "   * Konektovanje �tampa�a: Ukoliko je �tampa� fizi�ki vezan za "
#~ "kompjuter, izaberite \"Lokalni �tampa�\".\n"
#~ "     Ukoliko �elite da pristupite �tampa�u koje lociran na udaljenoj Unix "
#~ "ma�ini, izaberite \"Udaljeni lpd �tampa�\".\n"
#~ "\n"
#~ "\n"
#~ "     Ukoliko �elite da pristupite �tampa�u koje lociran na udaljenoj "
#~ "Microsoft Windows  ma�ini (ili na Unix ma�ini koriste�i SMB\n"
#~ "     protokol), izaberite \"SMB/Windows 95/98/NT\".\n"
#~ "\n"
#~ "\n"
#~ "     Ukoliko �elite da pristupite �tampa�u koje lociran na NetWare mre�i, "
#~ "izaberite\"NetWare\".\n"

#~ msgid ""
#~ "Your printer has not been detected. Please enter the name of the device "
#~ "on\n"
#~ "which it is connected.\n"
#~ "\n"
#~ "\n"
#~ "For information, most printers are connected on the first parallel port. "
#~ "This\n"
#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
#~ "Windows."
#~ msgstr ""
#~ "Va� �tampa� nije detektovan. Unesite ime ure�aja/porta na\n"
#~ "koji je priklju�en.\n"
#~ "\n"
#~ "\n"
#~ "Za va�u informaciju, ve�ina �tampa�a je povezana na prvi paralelni port. "
#~ "A taj port\n"
#~ "se naziva \"/dev/lp0\" pod GNU/Linux-om i  \"LPT1\" pod  Microsoft "
#~ "Windows-om."

#~ msgid "You must now select your printer in the above list."
#~ msgstr "Sada morate izabrati va� �tampa� sa gornje liste"

#~ msgid ""
#~ "Please select the right options according to your printer.\n"
#~ "Please see its documentation if you don't know what choose here.\n"
#~ "\n"
#~ "\n"
#~ "You will be able to test your configuration in next step and you will be "
#~ "able to modify it if it doesn't work as you want."
#~ msgstr ""
#~ "Molim vas izaberite prave opcije koje su u skladu sa va�im �tampa�em.\n"
#~ "Pogledajte i dokumentaciju koju  ste dobili uz �tampa� ukoliko ne znate "
#~ "�ta to ovde birate.\n"
#~ "\n"
#~ "\n"
#~ "Mo�i �ete da testirate svoju konfiguraciju u slede�em koraku i mo�i �ete "
#~ "da menjatemo�i �ete da je menjate ukoliko neradti kako vi �elite."

#~ msgid ""
#~ "You can now enter the root password for your Mandrake Linux system.\n"
#~ "The password must be entered twice to verify that both password entries "
#~ "are identical.\n"
#~ "\n"
#~ "\n"
#~ "Root is the system's administrator and is the only user allowed to modify "
#~ "the\n"
#~ "system configuration. Therefore, choose this password carefully. \n"
#~ "Unauthorized use of the root account can be extemely dangerous to the "
#~ "integrity\n"
#~ "of the system, its data and other system connected to it.\n"
#~ "\n"
#~ "\n"
#~ "The password should be a mixture of alphanumeric characters and at least "
#~ "8\n"
#~ "characters long. It should never be written down.\n"
#~ "\n"
#~ "\n"
#~ "Do not make the password too long or complicated, though: you must be "
#~ "able to\n"
#~ "remember it without too much effort."
#~ msgstr ""
#~ "Sada, mo�ete uneti  root lozinku za va� Mandrake Linux sistem.\n"
#~ "Lozinka mora biti uneta dva puta radi verifikacije da su oba unosa\n"
#~ "lozinki ista.\n"
#~ "\n"
#~ "\n"
#~ "Root je administrator sistema, i jedni korisnikkoji\n"
#~ "mo�e da modifikuje sistemske opcije. Zbog toga,\n"
#~ "birajte lozinku pa�ljivo! Nedozvoljeni pristup na root ra�un mo�ebiti "
#~ "veoma opasan\n"
#~ "za bezbednost sistema i podataka, kao i drugih povezanih sistema.\n"
#~ "\n"
#~ "\n"
#~ "Lozinka treba da me�avina alfanumeri�kih\n"
#~ "karaktera i najmanje 8 karaktera duga�ka.\n"
#~ "\n"
#~ "\n"
#~ "*Nikada* je ne zapisujte na papir. Ne pravite lozinku previ�edugom\n"
#~ "i komplikovanom, jer je morate upamtiti bez mnogo napora."

#~ msgid ""
#~ "If your network uses LDAP (or NIS) protocol for authentication, select\n"
#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
#~ "network\n"
#~ "administrator.\n"
#~ "\n"
#~ "If your computer is not connected to any administrated network, you may "
#~ "want to\n"
#~ "choose \"Local files\" for authentication."
#~ msgstr ""
#~ "Ukoliko va�a mre�a koristi LDAP (ili NIS) protokol za identifikaciju, "
#~ "izaberite\n"
#~ "\"LDAP\" (ili \"NIS\") kao identifikaciju. Ukoliko ne znate, pitajte "
#~ "va�eg mre�nog\n"
#~ "administratora.\n"
#~ "\n"
#~ "Ukoliko va� kompjuter nije pozvezan ni na jednu administriranu mre�u, "
#~ "mo�da �elite da\n"
#~ "izaberete \"Lokalne datoteke\" za identifikaciju."

#~ msgid ""
#~ "You may now create one or more \"regular\" user account(s), as\n"
#~ "opposed to the \"privileged\" user account, root. You can create\n"
#~ "one or more account(s) for each person you want to allow to use\n"
#~ "the computer. Note that each user account will have its own\n"
#~ "preferences (graphical environment, program settings, etc.)\n"
#~ "and its own \"home directory\", in which these preferences are\n"
#~ "stored.\n"
#~ "\n"
#~ "\n"
#~ "First of all, create an account for yourself! Even if you will be the "
#~ "only user\n"
#~ "of the machine, you may NOT connect as root for daily use of the system: "
#~ "it's a\n"
#~ "very high security risk. Making the system unusable is very often a typo "
#~ "away.\n"
#~ "\n"
#~ "\n"
#~ "Therefore, you should connect to the system using the user account\n"
#~ "you will have created here, and login as root only for administration\n"
#~ "and maintenance purposes."
#~ msgstr ""
#~ "Sada mo�ete kreirati jedan ili vi�e obi�nih \"regular\" korisni�kih\n"
#~ "ra�una, nasuprot privilegovanom \"privileged\" korisni�kom ra�unu, root.\n"
#~ "Mo�ete kreirati jedan ili vi�e ra�una za svaku osobu koja �eli koristiti\n"
#~ "ra�unar. Nema limita. Svaki korisnik �e imati sopstveno pode�ene "
#~ "parametre\n"
#~ "(grafi�ko okru�enje, kao i svoj home direktorijum \"Osnovna direktorijum"
#~ "\",\n"
#~ "u kojem se ovi parametri i nalaze.\n"
#~ "\n"
#~ "\n"
#~ "Pre svega, napravite ra�un za va� same! �ak i ukoliko �ete biti jedini\n"
#~ "korisnik na ra�unaru, NE treba da se konektujete kao root za svakodnevnu\n"
#~ "upotrebu sistema: to je veoma veliki sigurnosni rizik. Mo�ete sistem\n"
#~ "u�initi nestabilnim ili ga �ak onesposobiti �to je �esta pojava !\n"
#~ "Zbog toga, TREBA da se konektujete koriste�i obi�an korisnik . Ra�un "
#~ "koji\n"
#~ "�ete kreirati ovde, a root ra�un koristiti SAMO pri administriranju ili\n"
#~ "odr�avanju sistema."

#~ msgid ""
#~ "Creating a boot disk is strongly recommended. If you can't\n"
#~ "boot your computer, it's the only way to rescue your system without\n"
#~ "reinstalling it."
#~ msgstr ""
#~ "Kreiranje startne(boot) diskete je vrlo preporu�ljivo. Ukoliko ne mo�ete "
#~ "da\n"
#~ "startujete kompjuter, to je jedini na�in da spasite sistem od\n"
#~ "reinstalacije."

#~ msgid ""
#~ "LILO and grub main options are:\n"
#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
#~ "partition) that contains the boot sector. Unless you know specifically\n"
#~ "otherwise, choose \"/dev/hda\".\n"
#~ "\n"
#~ "\n"
#~ "  - Delay before booting default image: Specifies the number in tenths\n"
#~ "of a second the boot loader should wait before booting the first image.\n"
#~ "This is useful on systems that immediately boot from the hard disk after\n"
#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
#~ "omitted or is set to zero.\n"
#~ "\n"
#~ "\n"
#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
#~ "when booting. The following values are available: \n"
#~ "\n"
#~ "    * normal: select normal 80x25 text mode.\n"
#~ "\n"
#~ "    * <number>:  use the corresponding text mode.\n"
#~ "\n"
#~ "\n"
#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
#~ "directories\n"
#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
#~ "\n"
#~ "\n"
#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
#~ "ask the\n"
#~ "BIOS about the amount of RAM present in your computer. As consequence, "
#~ "Linux may\n"
#~ "fail to detect your amount of RAM correctly. If this is the case, you "
#~ "can\n"
#~ "specify the correct amount or RAM here. Please note that a difference of "
#~ "2 or 4\n"
#~ "MB between detected memory and memory present in your system is normal."
#~ msgstr ""
#~ "Glavne opcije za LILO i grub su:\n"
#~ "  - Boot ure�aj: Pode�ava ime ure�aja (npr. hard disk particije)\n"
#~ "koji sadr�i boot sektor. Ukoliko druga�ije nije odre�eno,\n"
#~ "izaberite \"/dev/hda\".\n"
#~ "\n"
#~ "\n"
#~ "  - Pauza pre startanja default image-a: Specificira broj u desetim "
#~ "delovima\n"
#~ "sekunde za koji starter treba da �eka pre startanja prvog image-a.\n"
#~ "Ovo je korisno na sistemima koji odmah startaju sa hard diska posle\n"
#~ "detekcije tastaure. Starter ne �eka ukoliko je  \"delay\" \n"
#~ "prazno ili pode�eno na 0 - nula .\n"
#~ "\n"
#~ "\n"
#~ "  - Video mod: Ovaj mod pode�ava VGA tekst mod koji se bira pri\n"
#~ "startanju. Mogu�e su slede�e vrednosti: \n"
#~ "\n"
#~ "    * normalno: koristi normalni 80x25 tekst mod.\n"
#~ "\n"
#~ "    * <broj>: koristi korespondentni tekst mod.\n"
#~ "\n"
#~ "  - O�isti \"/tmp\" pri svakom startanju : ukoliko �elite da uklonite sve "
#~ "datoteke i direktorijume\n"
#~ "koji sse nalaze u \"/tmp\" kada startuje sistem, selektujte ovu opciju.\n"
#~ "\n"
#~ "\n"
#~ "  - Defini�ite RAM ukoliko je potrebno: na �alost, ne postoji standardni "
#~ "metod  upit\n"
#~ "BIOS-u o veli�ini RAM prisutnog u va�em kompjuteru. Kao posledica toga, "
#~ "Linux mo�e\n"
#~ "fpogre�no detektovati veli�inu RAM memorije. Ukoliko se to desi, mo�ete\n"
#~ "ovde sami uneti pravu veli�inu RAMa. Zapamtite da razlika u  2 ili 4\n"
#~ "MB izme�u detektovane i stvarne veli�ine RAMa u sistemu �este normalna "
#~ "stvar."

#~ msgid ""
#~ "SILO is a bootloader for SPARC: it is able to boot\n"
#~ "either GNU/Linux or any other operating system present on your computer.\n"
#~ "Normally, these other operating systems are correctly detected and\n"
#~ "installed. If this is not the case, you can add an entry by hand in this\n"
#~ "screen. Be careful as to choose the correct parameters.\n"
#~ "\n"
#~ "\n"
#~ "You may also want not to give access to these other operating systems to\n"
#~ "anyone, in which case you can delete the corresponding entries. But\n"
#~ "in this case, you will need a boot disk in order to boot them!"
#~ msgstr ""
#~ "SILO je starter za SPARC: on mo�e da starta\n"
#~ "ili Linux ili bilo koji  drugi  operativni sistem prisutan na va�em "
#~ "kompjuteru.\n"
#~ "Naravno, ovi drugi operat.sistemi su ispravno detektovani i "
#~ "instalirani. \n"
#~ "Ukoliko to nije tako,mo�ete to sami urediti ovde.Pazite kada unosite "
#~ "parametre\n"
#~ "\n"
#~ "\n"
#~ "Tako�e,mo�ete �eleti da ostalim operat.sistemima onemogu�ite da pristupe "
#~ "drugi \n"
#~ "U tom slu�aju, treba da izbri�ete odgovaraju�e linije za te sisteme. Ali\n"
#~ "onda morate imati boot diskete da bi ih startali !"

#~ msgid ""
#~ "SILO main options are:\n"
#~ "  - Bootloader installation: Indicate where you want to place the\n"
#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
#~ "\n"
#~ "\n"
#~ "  - Delay before booting default image: Specifies the number in tenths\n"
#~ "of a second the boot loader should wait before booting the first image.\n"
#~ "This is useful on systems that immediately boot from the hard disk after\n"
#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
#~ "omitted or is set to zero."
#~ msgstr ""
#~ "SILO glavne opcije su:\n"
#~ "  - Instalacija startera: nazna�ite gde �elite da smestite informacije\n"
#~ "potrebne za startanje Linux-a.Ukoliko ne znate ta�no �ta radite,\n"
#~ "izaberite \"Prvi sektor hard diska (MBR)\".\n"
#~ "\n"
#~ "\n"
#~ "  - Pauza pre startanja default image-a: Specificira broj u desetim "
#~ "delovima\n"
#~ "sekunde za koji starter treba da �eka pre startanja prvog image-a.\n"
#~ "Ovo je korisno na sistemima koji odmah startaju sa hard diska posle\n"
#~ "detekcije tastaure. Starter ne �eka ukoliko je  \"delay\" \n"
#~ "prazno ili pode�eno na 0 - nula ."

#~ msgid ""
#~ "Now it's time to configure the X Window System, which is the\n"
#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
#~ "you must configure your video card and monitor. Most of these\n"
#~ "steps are automated, though, therefore your work may only consist\n"
#~ "of verifying what has been done and accept the settings :)\n"
#~ "\n"
#~ "\n"
#~ "When the configuration is over, X will be started (unless you\n"
#~ "ask DrakX not to) so that you can check and see if the\n"
#~ "settings suit you. If they don't, you can come back and\n"
#~ "change them, as many times as necessary."
#~ msgstr ""
#~ "Sada je do�lo vreme da podesimo X Window sistem, koji je\n"
#~ "jezgro Linux GUI-a (Linux Grafi�ko Korisni�ko Okru�enje). U tu svrhu,\n"
#~ "morate konfigurisati va�u video kartu i monitor. Ve�inom\n"
#~ "su ovi postupci automatizovani, tako da se va� posao mo�e\n"
#~ "svesti na potvr�ivanje onog �to je ura�eno i prihvatanje\n"
#~ "pode�enih opcija :-)\n"
#~ "\n"
#~ "\n"
#~ "Kada konfiguracija bude zavr�ena, X-ovi �e se podi�i (osim ako\n"
#~ "ka�ete DrakX-u da to ne radi!) tako da mo�ete isprobati da li je\n"
#~ "sve pode�eno kako valja. Ako se ne podignu, vratite se korak nazad\n"
#~ "i promenite pode�avanje koliko god puta je potrebno."

#~ msgid ""
#~ "If something is wrong in X configuration, use these options to correctly\n"
#~ "configure the X Window System."
#~ msgstr ""
#~ "Ukoliko je ne�to pogre�no u X konfiguraciji, koristite ove opcije\n"
#~ "da bi ispravno podeesili X Window sistem."

#~ msgid ""
#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
#~ "select\n"
#~ "\"No\"."
#~ msgstr ""
#~ "Ukoliko vi�e volite logovanje u grafi�kom modu, izaberite \"Da\".\n"
#~ "U suprotnom izaberite \"Ne\"."

#~ msgid ""
#~ "You can choose a security level for your system. Please refer to the "
#~ "manual for complete\n"
#~ "  information. Basically, if you don't know what to choose, keep the "
#~ "default option.\n"
#~ msgstr ""
#~ "Mo�ete izabrati sigurnosni nivo za va� sistem. Pogledajte upustvo za "
#~ "vi�e\n"
#~ "  informacija. U osnovi, ukoliko ne znate �ta da odaberetee, ostavite "
#~ "default opciju.\n"

#~ msgid ""
#~ "Your system is going to reboot.\n"
#~ "\n"
#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
#~ "If you want to boot into another existing operating system, please read\n"
#~ "the additional instructions."
#~ msgstr ""
#~ "Sistem �e se resetovati.\n"
#~ "\n"
#~ "Posle resetovanja, va� novi Mandrake Linux sistem �e se podi�i "
#~ "automatski.\n"
#~ "Ukoliko �elite da podignete neki drugi instalirani operativni sistem,\n"
#~ "pro�itate upustvo ili posetite neki od Linux chat kanala."

#~ msgid "Czech (Programmers)"
#~ msgstr "�e�ki (Programeri)"

#~ msgid "Slovakian (Programmers)"
#~ msgstr "Slova�ki (Programerski)"

#~ msgid "Name of the profile to create:"
#~ msgstr "Ime profila koji se kreira:"

#~ msgid "Write /etc/fstab"
#~ msgstr "Ispi�i /etc/fstab"

#~ msgid "Restore from file"
#~ msgstr "Povrati (restore) iz datoteke"

#~ msgid "Save in file"
#~ msgstr "Snimi u datoteku"

#~ msgid "Restore from floppy"
#~ msgstr "Povrati (restore) sa diskete"

#~ msgid "Format all"
#~ msgstr "Formatiraj sve"

#~ msgid "After formatting all partitions,"
#~ msgstr "Posle formatiranja svih particija,"

#~ msgid "all data on these partitions will be lost"
#~ msgstr "svi podaci na njima �e biti uni�teni"

#~ msgid "Reload"
#~ msgstr "Ponovo unesi"

#~ msgid ""
#~ "Do you want to generate an auto install floppy for linux replication?"
#~ msgstr ""
#~ "Da li �elite da kreirate autoinstalacioni flopi za replikaciju linux-a ?"

#~ msgid "ADSL configuration"
#~ msgstr "ADSL konfiguracija"

#~ msgid ""
#~ "With a remote CUPS server, you do not have to configure\n"
#~ "any printer here; printers will be automatically detected\n"
#~ "unless you have a server on a different network; in the\n"
#~ "latter case, you have to give the CUPS server IP address\n"
#~ "and optionally the port number."
#~ msgstr ""
#~ "Sa udaljenim CUPS serverom, ne morate da kofiguri�ete\n"
#~ "ovde ni jedan �tampa�; �tampa�i �e biti automatski detektovani.\n"
#~ "osim ako imate server na drugoj mre�i; ako je to\n"
#~ "slu�aj, morate dati IP adresu  CUPS servera\n"
#~ "a opciono i broj porta."

#~ msgid "Enter Printer Name and Comments"
#~ msgstr "Unesite Ime �tampa�a i Komentare"

#~ msgid "Remote queue name missing!"
#~ msgstr "Nedostaje ime za udaljeni red!"

#~ msgid "Pipe into command"
#~ msgstr "Ubaci u komandu"

#~ msgid ""
#~ "Here you can specify any arbitrary command line into which the job should "
#~ "be piped instead of being sent directly to a printer."
#~ msgstr ""
#~ "Ovde mo�ete odrediti bilo koju komandnu liniju na koju bi �tampa� poslao "
#~ "zadatak umesto da ga po�alje direktno na �tampu."

#~ msgid "Command line"
#~ msgstr "Komandna linija"

#~ msgid "A command line must be entered!"
#~ msgstr "Komandna linija mora biti une�ena!"

#~ msgid "Network Monitoring"
#~ msgstr "Monitoring mre�e"

#~ msgid "Settings"
#~ msgstr "Opcije"

#~ msgid "Profile "
#~ msgstr "Profil "

#~ msgid "Statistics"
#~ msgstr "Statistike"

#~ msgid "Sending Speed:"
#~ msgstr "Brzina slanja podataka:"

#~ msgid "Receiving Speed:"
#~ msgstr "Brzina primanja podataka:"

#~ msgid "Connection Time: "
#~ msgstr "Vreme konekcije: "

#~ msgid "Logs"
#~ msgstr "Logovi"

#~ msgid "Connecting to Internet "
#~ msgstr "Konektujem na Internet "

#~ msgid "Disconnecting from Internet "
#~ msgstr "Diskonektujem sa Interneta"

#~ msgid "Disconnection from Internet failed."
#~ msgstr "Diskonekcija sa Interneta neuspela."

#~ msgid "Disconnection from Internet complete."
#~ msgstr "Diskonekekcija sa Interneta zavr�ena."

#~ msgid "Connection complete."
#~ msgstr "Konekcija zavr�ena."

#~ msgid ""
#~ "Connection failed.\n"
#~ "Verify your configuration in the Mandrake Control Center."
#~ msgstr ""
#~ "Konekcija neuspela.\n"
#~ "Proverite svoju konfiguraciju u Mandrake Kontrolonom Centru."

#~ msgid "Color configuration"
#~ msgstr "Konfiguracija boje"

#~ msgid "sent: "
#~ msgstr "poslato:"

#~ msgid "received: "
#~ msgstr "primljeno: "

#~ msgid "average"
#~ msgstr "prose�no"

#~ msgid "Connect"
#~ msgstr "Konektuj"

#~ msgid "Disconnect"
#~ msgstr "Diskonektuj"

#~ msgid "/File/_New"
#~ msgstr "/_Datoteka/_Nova"

#~ msgid "<control>N"
#~ msgstr "<control>N"

#~ msgid "/File/_Open"
#~ msgstr "/Datoteka/_Otvori"

#~ msgid "<control>O"
#~ msgstr "<control>O"

#~ msgid "/File/_Save"
#~ msgstr "/Datoteka/_Sa�uvaj"

#~ msgid "<control>S"
#~ msgstr "<control>S"

#~ msgid "/File/Save _As"
#~ msgstr "/Datoteka/Sa�uvaj_Kao"

#~ msgid "/File/-"
#~ msgstr "/Datoteka/-"

#~ msgid "/_Options"
#~ msgstr "/_Opcije"

#~ msgid "/Options/Test"
#~ msgstr "/Opcije/Test"

#~ msgid "/_Help"
#~ msgstr "_Pomo�"

#~ msgid "/Help/_About..."
#~ msgstr "/Pomo�/_O..."

#~ msgid "Default Runlevel"
#~ msgstr "Podrazumevani Runlevel"

#~ msgid "Europe"
#~ msgstr "Evropa"

#~ msgid "NetWare"
#~ msgstr "NetWare"

#~ msgid "Remove queue"
#~ msgstr "Ukloni queue"

#~ msgid "Config file content could not be interpreted."
#~ msgstr "Konfiguracioni fajl nije mogu�e interpretirati"

#~ msgid "Unrecognized config file"
#~ msgstr "Nepoznata konfiguraciona datoteka"

#~ msgid "Adapter"
#~ msgstr "Adapter"

#~ msgid "Disable network"
#~ msgstr "isklju�i  mre�u"

#~ msgid "Enable network"
#~ msgstr "Uklju�i mre�u"

#~ msgid ""
#~ "You can now test your mouse. Use buttons and wheel to verify\n"
#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
#~ "another\n"
#~ "driver."
#~ msgstr ""
#~ "Sada mo�ete da testirate mi�a. Pritiskajte tastere i pokrenite to�ki� da "
#~ "bi potvrdili\n"
#~ "da li su postavke dobre. Ukoliko nisu, kliknite na \"Poni�ti\" da bi "
#~ "izabrali drugi\n"
#~ "drajver."

#~ msgid "DSL (or ADSL) connection"
#~ msgstr "DSL (ili ADSL) konekcija"

#, fuzzy
#~ msgid "Choose"
#~ msgstr "Zatvori"

#~ msgid "You can specify directly the URI to access the printer with CUPS."
#~ msgstr "Mo�ete da odredite URI direktno radi pristupa �tampa�u sa CUPS-a"

#~ msgid "Yes, print ASCII test page"
#~ msgstr "Da, i�tampaj ASCII test stranicu"

#~ msgid "Yes, print PostScript test page"
#~ msgstr "Da, i�tampaj PostScript test stranicu"

#~ msgid "Yes, print both test pages"
#~ msgstr "Da, i�tampaj obe test stranice"

#~ msgid "Paper Size"
#~ msgstr "Veli�ina papira"

#~ msgid "Eject page after job?"
#~ msgstr "Izbaci papir nakon �tampanja ?"

#~ msgid "Uniprint driver options"
#~ msgstr "Uniprint  drajver -opcije"

#~ msgid "Color depth options"
#~ msgstr "Opcija - Broj boja"

#~ msgid "Print text as PostScript?"
#~ msgstr "�tampaj tekst kao PostScript?"

#~ msgid "Fix stair-stepping text?"
#~ msgstr "Popraviti  'efekat stepenica' u tekstu?"

#~ msgid "Number of pages per output pages"
#~ msgstr "Broj stranica po izlaznim stranicama"

#~ msgid "Right/Left margins in points (1/72 of inch)"
#~ msgstr "Desna/leva margina u ta�kama (1/72 deo in�a)"

#~ msgid "Top/Bottom margins in points (1/72 of inch)"
#~ msgstr "Vrh/dno margina u ta�kama (1/72 deo in�a)"

#~ msgid "Extra GhostScript options"
#~ msgstr "Dodatne GhostScript opcije"

#~ msgid "Extra Text options"
#~ msgstr "Dodatne Tekst opcije"

#~ msgid "Reverse page order"
#~ msgstr "Obrnut redosled stranica"

#~ msgid "CUPS starting"
#~ msgstr "Pokre�em CUPS.."

#~ msgid "Select Remote Printer Connection"
#~ msgstr "Izaberi  konekciju udaljenih �tampa�a"

#~ msgid ""
#~ "With a remote CUPS server, you do not have to configure\n"
#~ "any printer here; printers will be automatically detected.\n"
#~ "In case of doubt, select \"Remote CUPS server\"."
#~ msgstr ""
#~ "Sa udaljenim CUPS serverom, ne morate da kofiguri�ete\n"
#~ "ovde ni jedan �tampa�; �tampa�i �e biti automatski detektovani.\n"
#~ "In Ukoliko se dvoumite, izaberite \"Udaljeni CUPS server\"."

#~ msgid ""
#~ "Every printer need a name (for example lp).\n"
#~ "Other parameters such as the description of the printer or its location\n"
#~ "can be defined. What name should be used for this printer and\n"
#~ "how is the printer connected?"
#~ msgstr ""
#~ "Svaki  �tampa� mora da ima ime (npr. lp).\n"
#~ "Ostali parametri kao �to je opis ili njegova lokacija \n"
#~ "mogu biti definisani.Koje ime treba da bude iskori�teno za  ovaj �tampa� "
#~ "i\n"
#~ "kako je �tampa� povezan?"

#~ msgid ""
#~ "Every print queue (which print jobs are directed to) needs a\n"
#~ "name (often lp) and a spool directory associated with it. What\n"
#~ "name and directory should be used for this queue and how is the printer "
#~ "connected?"
#~ msgstr ""
#~ "Svaki 'red' za �tampu (u koji se sla�u poslovi za �tampanje) zahteva\n"
#~ "ime (obi�no lp) i 'spool' direktorijum koji uz to ide. Koje ime i "
#~ "direktorijum\n"
#~ "da koristim za ovaj red za �tampu i kako je  �tampa� povezan?"

#~ msgid "Name of queue"
#~ msgstr "Ime queue-a "

#~ msgid "Spool directory"
#~ msgstr "'Spool direktorijum"

#~ msgid "Disable"
#~ msgstr "Onemogu�i"

#~ msgid "Enable"
#~ msgstr "Omogu�i"

#, fuzzy
#~ msgid "fsck failed: "
#~ msgstr "montiranje nije uspelo"

#~ msgid ""
#~ "To enable a more secure system, you should select \"Use shadow file\" "
#~ "and\n"
#~ "\"Use MD5 passwords\"."
#~ msgstr ""
#~ "Da bi omogu�ili ve�u sigurnost sistema, izaberite \"Koristi shadow fajl\" "
#~ "i\n"
#~ "\"Use MD5 passwords\"."

#~ msgid ""
#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
#~ "your\n"
#~ "network administrator."
#~ msgstr ""
#~ "Ukoliko va� ra�unar koristi NIS, izaberite \"Koristi NIS\". Ukoliko "
#~ "niste\n"
#~ "sigurni kontaktirajte va�eg administratora."

#~ msgid "yellow pages"
#~ msgstr "�ute stranice"

#, fuzzy
#~ msgid "Light configuration"
#~ msgstr "LAN konfiguracija"

#~ msgid "Provider dns 1"
#~ msgstr "Provajderov dns 1"

#~ msgid "Provider dns 2"
#~ msgstr "Provajderov dns 2"

#~ msgid "How do you want to connect to the Internet?"
#~ msgstr "Kako �elite da se konektujete na internet ?"

#~ msgid "cannot fork: "
#~ msgstr "Ne mogu da fork-ujem:"

#~ msgid "Configure..."
#~ msgstr "Konfiguracija..."

#, fuzzy
#~ msgid "Lilo/Grub configuration"
#~ msgstr "LAN konfiguracija"

#~ msgid "Selected size %d%s"
#~ msgstr "Izaberite veli�inu %d%s"

#~ msgid "Opening your connection..."
#~ msgstr "Otvaram konekciju..."

#~ msgid "Standard tools"
#~ msgstr "Standardni alati"

#~ msgid "Configuration de Lilo/Grub"
#~ msgstr "Konfiguracija za Lilo/Grub"

#~ msgid "This startup script try to load your modules for your usb mouse."
#~ msgstr "Ova startup skripta poku�ava u�itati module za usb mi�a"

#~ msgid "Boot style configuration"
#~ msgstr "Konfiguracija stila startera"

#~ msgid ""
#~ "Now that your Internet connection is configured,\n"
#~ "your computer can be configured to share its Internet connection.\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN).\n"
#~ "\n"
#~ "Would you like to setup the Internet Connection Sharing?\n"
#~ msgstr ""
#~ "Sada kada ste konfigurisali va�u Internet konekciju,\n"
#~ "va� kompjuter mo�ete podesiti za deljenje njegove Internet konekcije.\n"
#~ "Napomena: potrebana vam je mre�na kartica da bi podesili lokalnu mre�u"
#~ "(LAN).\n"
#~ "\n"
#~ "Da li �elite da podesite deljenje Internet konekcije ?\n"

#~ msgid "Automatic dependencies"
#~ msgstr "Automatske zavisnosti"

#~ msgid "Configure LILO/GRUB"
#~ msgstr "Konfigurisanje  LILO/GRUB startera"

#~ msgid "Create a boot floppy"
#~ msgstr "Napravi startnu disketu"

#~ msgid "Format floppy"
#~ msgstr "Formatiraj disketu"

#~ msgid "Choice"
#~ msgstr "Izbor"

#~ msgid "horizontal nice looking aurora"
#~ msgstr "horizontalna aurora"

#~ msgid "vertical traditional aurora"
#~ msgstr "vertikalna tradicionalna aurora"

#~ msgid "gMonitor"
#~ msgstr "gMonitor"

#~ msgid ""
#~ "You can now select some miscellaneous options for your system.\n"
#~ "\n"
#~ "* Use hard drive optimizations: this option can improve hard disk "
#~ "performance but is only for advanced users. Some buggy\n"
#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
#~ "builtin blacklist of drives and chipsets, but if\n"
#~ "  you want to avoid bad surprises, leave this option unset.\n"
#~ "\n"
#~ "\n"
#~ "* Choose security level: you can choose a security level for your system. "
#~ "Please refer to the manual for complete\n"
#~ "  information. Basically, if you don't know what to choose, keep the "
#~ "default option.\n"
#~ "\n"
#~ "\n"
#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
#~ "ask the BIOS about the amount of RAM present in\n"
#~ "  your computer. As consequence, Linux may fail to detect your amount of "
#~ "RAM correctly. If this is the case, you can\n"
#~ "  specify the correct amount or RAM here. Please note that a difference "
#~ "of 2 or 4 MB between detected memory and memory\n"
#~ "  present in your system is normal.\n"
#~ "\n"
#~ "\n"
#~ "* Removable media automounting: if you would prefer not to manually mount "
#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
#~ "  typing \"mount\" and \"umount\", select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
#~ "directories stored in \"/tmp\" when you boot your system,\n"
#~ "  select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Enable num lock at startup: if you want NumLock key enabled after "
#~ "booting, select this option. Please note that you\n"
#~ "  should not enable this option on laptops and that NumLock may or may "
#~ "not work under X."
#~ msgstr ""
#~ "Ovde mo�ete podesiti neke korisne opcije za va� sistem.\n"
#~ "\n"
#~ "* Upotrebi hard disk optimizaciju: Ova opcija ubrzava hard disk,ali je "
#~ "samo za naprednije korisnike : zbog mogu�nosti o�te�enja\n"
#~ "harda usled bagovitih chipset-ova.Dakle,\n"
#~ "    pazite. Zapamtite da kernel ima crnu listu drajvera i \n"
#~ "    chipset-ova, ali ukoliko ne volite iznena�enja, ostavite ovu opciju  "
#~ "nepode�enu.\n"
#~ "\n"
#~ "\n"
#~ "* Biranje sigurnosnog nivoa: Mo�ete birati nivo sigurnosti za va�\n"
#~ "sistem. Pro�itajte upustvo za vi�e informacija.U osnovi: \n"
#~ "ukoliko ne znate, izaberite defaultopciju\n"
#~ "\n"
#~ "\n"
#~ "* Defini�i veli�inu RAM-a (ako je potrebno): U nekim slu�ajevima,\n"
#~ "Linux ne mo�e da ta�no odredi sav instalirani RAM na nekim ma�inama."
#~ "Ukoliko se ovo desi, specificirajte ta�nu vrednost.\n"
#~ "Napomena: razlika u 2 ili 4 Mb je normalna.\n"
#~ "\n"
#~ "\n"
#~ "* Automontiranje prenosivih medija: Ukoliko ne volite ru�no montiranje\n"
#~ "prenosivih medija (CD-ROM, disketa, Zip) kucanjem \"mount\" i \"umount\"\n"
#~ "izaberite ovu opciju.\n"
#~ "\n"
#~ "\n"
#~ "* O�isti \"/tmp\" pri svakom startanju sistema: ukoliko �elite da "
#~ "izbri�te sve datoteke i direktorijumekoji se nalaze u  \"/tmp\" kada "
#~ "di�ete sistem,\n"
#~ "  izaberite ovu opciju.\n"
#~ "\n"
#~ "\n"
#~ "  - Omogu�i Num Lock taster pri startanju: Ako �elite da Num Lock bude\n"
#~ "aktiviran pri boot-anju, izaberite ovu opciju (Napomena: Num Lock mo�da "
#~ "opet ne�e raditi pod X-ima, ti malera !)."

#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
#~ msgstr ""
#~ "Na �alost, glavna konfiguracija jo� nije implementirana. Budite strpljivi."

#~ msgid ""
#~ "Welcome to The Network Configuration Wizard.\n"
#~ "Which components do you want to configure?\n"
#~ msgstr ""
#~ "Dobrodo�li u �arobnjak za konfigurisanje mre�e.\n"
#~ "Koju komponentu �elite da podesite?\n"

#~ msgid "Internet/Network access"
#~ msgstr "Internet/mre�ni pristup"

#~ msgid "Mail information"
#~ msgstr "Informacije o el.po�ti"

#~ msgid "No I don't need DHCP"
#~ msgstr "Ne, meni netreba DHCP"

#~ msgid "No I don't need NTP"
#~ msgstr "Ne, meni netreba NTP"

#~ msgid "No (firewall this off from the internet)"
#~ msgstr "Ne (ukolinte firewall sa ovoga)"

#~ msgid "Yes (allow this through the firewall)"
#~ msgstr "Da (postavite ovo kroz firewall)"

#~ msgid "Firewall Configuration Wizard"
#~ msgstr "�arobnjak za pode�avanje Firewall-a"

#~ msgid "Miscellaneous"
#~ msgstr "Razne opcije"

#~ msgid "Miscellaneous questions"
#~ msgstr "Razna pitanja"

#~ msgid "Can't use supermount in high security level"
#~ msgstr "Nije mogu�e korisititi supermount kod  'Velkog' sigurnosnog nivoa"

#~ msgid ""
#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
#~ "More generally, do not expect to use your machine for anything but as a "
#~ "server.\n"
#~ "You have been warned."
#~ msgstr ""
#~ "Upozorenje: U OVOM NIVOU SIGURNOSTI, logovanje kao ROOT  u konzoli  NIJE "
#~ "dozvoljeno!\n"
#~ "Ukoliko  �elite da budete root, morate se ulogovati kao korisnik a onda "
#~ "da ukucate \"su\".\n"
#~ "Ili jednostavnije, neo�ekujte da koristite ma�inu za ne�to drugo osim "
#~ "kaoserver.\n"
#~ "Upozoreni ste."

#~ msgid ""
#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
#~ msgstr ""
#~ "Budite pa�ljivi, ukoliko uklju�ite numlock to  mo�e dovesti do toga da "
#~ "mnoga\n"
#~ "tasteri daju brojeve umesto slova (npr: pritiskom na `p' dobijamo `6')"

#~ msgid "not connected"
#~ msgstr "nije konektovan"

#~ msgid "Actions"
#~ msgstr "Akcije"

#~ msgid "Scientific applications"
#~ msgstr "Nau�ne aplikacije"

#~ msgid "toot"
#~ msgstr "toot"

#~ msgid "File/Print/Samba"
#~ msgstr "Server, Datoteka/�tampa/Samba"

#~ msgid "DNS/DHCP "
#~ msgstr "Server, DNS/DHC "

#~ msgid "First DNS Server"
#~ msgstr "Prvi DNS Server"

#~ msgid "Second DNS Server"
#~ msgstr "Drugi DNS Server"

#~ msgid "using module"
#~ msgstr "sa upotrebom modula"

#~ msgid "Development, Database"
#~ msgstr "Razvoj, Baza podataka"

#~ msgid "Development, Integrated Environment"
#~ msgstr "Razvojno, integrisano okru�enje"

#~ msgid "Development, Standard tools"
#~ msgstr "Razvojna, standardni alati"

#~ msgid ""
#~ "\n"
#~ "Warning:\n"
#~ "Applying the changes while running may crash your X environnement."
#~ msgstr ""
#~ "\n"
#~ "Upozorenje:\n"
#~ "Prihvataju�u promene dok je aktivano mo�e dovesti do ru�enja X okru�enja."

#~ msgid ""
#~ "\n"
#~ "If you continue, I will shut down your %s environnement"
#~ msgstr ""
#~ "\n"
#~ "Ukoliko nastavite, ja �u iza�i iz %s okru�enja"

#~ msgid "eth$_"
#~ msgstr "eth$_"

#~ msgid "loopback"
#~ msgstr "povratno"

#~ msgid "Which bootloader(s) do you want to use?"
#~ msgstr "Koji starter �elite da koristite ?"

#~ msgid "Auto install floppy"
#~ msgstr "Auto instalaciona disketa "

#~ msgid "Try to find a modem?"
#~ msgstr "Da potra�im modem ?"

#~ msgid "Configure an ISDN connection"
#~ msgstr "Podesi ISDN konekciju"

#~ msgid "Configure a cable connection"
#~ msgstr "Podesi kablovsku konekciju"

#~ msgid "Disable Internet Connection"
#~ msgstr "Onemogu�u internet Konekciju"

#~ msgid "Configure local network"
#~ msgstr "Podesi lokalni mre�u"

#~ msgid "Configure the Internet connection / Configure local Network"
#~ msgstr "Podesi Internet konekciju / podesi lokalni mre�u"

#~ msgid ""
#~ "Local networking has already been configured.\n"
#~ "Do you want to:"
#~ msgstr ""
#~ "Lokalni mre�a je ve� pode�ena.\n"
#~ "Da li �elite da:"

#~ msgid "Reconfigure using wizard..."
#~ msgstr "Rekonfiguracija kori��enjem �arobnjaka..."

#~ msgid "Graphics Manipulation"
#~ msgstr "Manipulacija sa grafikom"

#~ msgid "Multimedia"
#~ msgstr "Multimedija"

#~ msgid ""
#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
#~ "file transfer tools"
#~ msgstr ""
#~ "Chat (IRC ili  instant messaging) programi kao �to su  xchat, licq, gaim, "
#~ "i alati za transfer datoteka"

#~ msgid "Communication facilities"
#~ msgstr "Komunikacione opcije"

#~ msgid "KDE"
#~ msgstr "KDE"

#~ msgid "Gnome"
#~ msgstr "Gnome"

#~ msgid "Internet Tools"
#~ msgstr "Internet Alati"

#~ msgid "Databases clients and servers (mysql and postgresql)"
#~ msgstr "Klijetni i serveri za baze podataka (mysql and postgresql)"

#~ msgid "Development C/C++"
#~ msgstr "Razvojna C/C++"

#~ msgid "Configure timezone"
#~ msgstr "Podesi vremensku zonu"

#~ msgid "Network adaptater 1 (eth0):"
#~ msgstr "Mre�ni adapter 1 (eth0):"

#~ msgid "(may cause data corruption)"
#~ msgstr "(mo�e uzrokovati gre�ke)"

#~ msgid "Use hard drive optimisations?"
#~ msgstr "Aktiviraj hard disk optimizaciju ?"

#~ msgid "Enable num lock at startup"
#~ msgstr "Aktiviraj Num Lock taster pri startanju"

#~ msgid "Confirm Password"
#~ msgstr "Potvrdi lozinku"

#~ msgid "default"
#~ msgstr "Po default-y"

#~ msgid "What is your system used for?"
#~ msgstr "Za �ta �e te korisiti sistem ?"

#~ msgid "Select the size you want to install"
#~ msgstr "Izaberite veli�inu  instalacije"

#~ msgid "Use diskdrake"
#~ msgstr "Koristi diskdrake"

#~ msgid "Customized"
#~ msgstr "Izbor po �elji"

#~ msgid ""
#~ "Are you sure you are an expert? \n"
#~ "You will be allowed to make powerful but dangerous things here.\n"
#~ "\n"
#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
#~ "are you ready to answer that kind of questions?"
#~ msgstr ""
#~ "Da li ste sigurno ekspert !? \n"
#~ "Xej,bez �ale,jer dobijate pristup mo�nim ali opasnim stvarima.\n"
#~ "Odgovara�ete na pitanja kao �to je: ``Da li �elite shadow fajl za "
#~ "lozinke ?'',\n"
#~ "da li ste spremni na odgovorite na ovakva pitanja ?"

#~ msgid "Use shadow file"
#~ msgstr "Koristi shadow fajl"

#~ msgid "shadow"
#~ msgstr "senka"

#~ msgid "MD5"
#~ msgstr "MD5"

#~ msgid "Use MD5 passwords"
#~ msgstr "Koristi  MD5 lozinku"

#~ msgid "Search"
#~ msgstr "Tra�i"

#~ msgid "Package"
#~ msgstr "Paket"

#~ msgid "Text"
#~ msgstr "Tekst"

#~ msgid "Tree"
#~ msgstr "Grana"

#~ msgid "Sort by"
#~ msgstr "Sortiraj po"

#~ msgid "Category"
#~ msgstr "Kategoriji"

#~ msgid "See"
#~ msgstr "Pogledaj"

#~ msgid "Installed packages"
#~ msgstr "Instalirani paketi"

#~ msgid "Available packages"
#~ msgstr "Dostupni paketi"

#~ msgid "Show only leaves"
#~ msgstr "Prika�i samo ostavljene"

#~ msgid "Expand all"
#~ msgstr "Pro�iri sve"

#~ msgid "Collapse all"
#~ msgstr "Skupi sve"

#~ msgid "Add location of packages"
#~ msgstr "Dodaj lokaciju paketa"

#~ msgid "Update location"
#~ msgstr "Osve�i lokaciju"

#~ msgid "Remove"
#~ msgstr "Ukloni"

#~ msgid "Find Package"
#~ msgstr "Prona�i paket"

#~ msgid "Find Package containing file"
#~ msgstr "Prona�i paket koji sadr�i fajl"

#~ msgid "Toggle between Installed and Available"
#~ msgstr "Biraj izme�u Instalirano i Dostuno"

#~ msgid "Choose package to install"
#~ msgstr "Izaberi pakete za instalaciju"

#~ msgid "Checking dependencies"
#~ msgstr "Provera zavisnosti"

#~ msgid "Wait"
#~ msgstr "Momenat..."

#~ msgid "The following packages are going to be uninstalled"
#~ msgstr "Slede�i paketi �e biti instalirani"

#~ msgid "Uninstalling the RPMs"
#~ msgstr "Deinstaliram RPM-ove"

#~ msgid "Regexp"
#~ msgstr "Regexp"

#~ msgid "Which package are looking for"
#~ msgstr "Koji paket tra�ite"

#~ msgid "%s not found"
#~ msgstr "%s nije prona�en"

#~ msgid "No match"
#~ msgstr "Nema poklapanja"

#~ msgid "No more match"
#~ msgstr "Nema vi�e poklapanja "

#~ msgid ""
#~ "rpmdrake is currently in ``low memory'' mode.\n"
#~ "I'm going to relaunch rpmdrake to allow searching files"
#~ msgstr ""
#~ "rpmdrake je trenutno u ``low memory'' modu.\n"
#~ "Restartujem  rpmdrake da bi omogu�io tra�enje datoteka"

#~ msgid "Which file are you looking for?"
#~ msgstr "Koju datoteku tra�ite ?"

#~ msgid "What are looking for?"
#~ msgstr "�ta tra�ite ?"

#~ msgid "Give a name (eg: `extra', `commercial')"
#~ msgstr "Dajte ime (npr: `extra', `commercial')"

#~ msgid "Directory"
#~ msgstr "Direktorijum"

#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
#~ msgstr "cdrom nije dostupan(nema ni�ta u  /mnt/cdrom)  "

#~ msgid "URL of the directory containing the RPMs"
#~ msgstr "URL direktorijuma koji sadr�i RPM-ove"

#~ msgid ""
#~ "For FTP and HTTP, you need to give the location for hdlist\n"
#~ "It must be relative to the URL above"
#~ msgstr ""
#~ "Za FTP i  HTTP  je potrebno da date lokaciju za hdlist\n"
#~ "Ona mora biti relativna u odnosu na gore navedeni URL"

#~ msgid "Please submit the following information"
#~ msgstr "Molim uva�ite slede�u informaciju"

#~ msgid "%s is already in use"
#~ msgstr "%s je ve� u upotrebi"

#~ msgid "Updating the RPMs base"
#~ msgstr "Osve�avanje RPM baze"

#~ msgid "Going to remove entry %s"
#~ msgstr "Uklanjam unos  %s"

#~ msgid "Finding leaves"
#~ msgstr "Prona�i ostavljene"

#~ msgid "Finding leaves takes some time"
#~ msgstr "Prona�i ostavljenih tra�i malo vremena"

#~ msgid "Czech"
#~ msgstr "�e�ki"

#~ msgid ""
#~ "The system is now connected to Internet! Congratulation.\n"
#~ "Feel free to launch draknet at any time to setup your connection.\n"
#~ msgstr ""
#~ "Sistem je sada konektovan na Internet ! �estitamo.\n"
#~ "Mo�ete slobodno pokrenuti draknet bilo kada i podesiti konekciju.\n"

#~ msgid "I have found an ISDN Card:\n"
#~ msgstr "Prona�ena ISDN kartica:\n"

#~ msgid "France"
#~ msgstr "Francuska"

#~ msgid "Other countries"
#~ msgstr "Druge zemlje"

#~ msgid "In which country are you located ?"
#~ msgstr "U kojoj se zamlji nalazite ?"

#~ msgid "Alcatel modem"
#~ msgstr "Alcatel modem"

#~ msgid "ECI modem"
#~ msgstr "ECI modem"

#~ msgid ""
#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
#~ msgstr ""
#~ "Ako je va� adsl modem Alcatel -ov,izaberite Alcatel.Ukoliko nije,ECI."

#~ msgid "don't use pppoe"
#~ msgstr "ne koristi pppoe"

#~ msgid "mandatory"
#~ msgstr "obavezno"

#~ msgid "interesting"
#~ msgstr "interesantno"

#~ msgid "i18n (important)"
#~ msgstr "i18n (va�no)"

#~ msgid "i18n (very nice)"
#~ msgstr "i18n(veoma lepo)"

#~ msgid "i18n (nice)"
#~ msgstr "i18n(lepo)"

#~ msgid "Could not install ipchains RPM with urpmi."
#~ msgstr "Ne mogu instalirati ipchains RPM sa urpmi."

#~ msgid "Could not install dhcp RPM with urpmi."
#~ msgstr "Ne mogu instalirati dhcp RPM sa urpmi."

#~ msgid "Could not install linuxconf RPM with urpmi."
#~ msgstr "Ne mogu instalirati linuxconf RPM sa urpmi"

#~ msgid "Could not install bind RPM with urpmi."
#~ msgstr "Ne mogu instalirati bind RPM sa urpmi"

#~ msgid "Could not install caching-nameserver RPM with urpmi."
#~ msgstr "Ne mogu instalirati caching-nameserver RPM sa urpmi"

#~ msgid "Which serial port is your mouse connected to?"
#~ msgstr "Na koji serijski port je va� mi� priklju�en?"

#~ msgid "Reconfigure local network"
#~ msgstr "Rekonfiguri�i lokalnu mre�u"

#~ msgid ""
#~ "Your computer can be configured to share its Internet connection.\n"
#~ "\n"
#~ msgstr ""
#~ "Va� ra�unar mo�e biti pode�en za deljenje internet konekcije.\n"
#~ "\n"

#~ msgid "Everything has been configured.\n"
#~ msgstr "Sve je konfigurisano.\n"

#~ msgid "Connect to Internet with a normal modem"
#~ msgstr "Konektuj na Internet sa obi�nim modemom"

#~ msgid "Connect to Internet using ISDN"
#~ msgstr "Konektuj na Internet sa ISDN karticom"

#~ msgid "Connect to Internet using DSL (or ADSL)"
#~ msgstr "Konektuj na Internet koriste�i DSL (ili  ADSL)"

#~ msgid "Connect to Internet using Cable"
#~ msgstr "Konektuj na Internet koriste�i Kabl"

#~ msgid ""
#~ "Time (secs) of inactivity after which\n"
#~ "it hangs up. (leave blank to disable it)"
#~ msgstr ""
#~ "Vreme (u sekundama) inaktivnosti nakon kojeg\n"
#~ "se veza prekida. (ostaviti prazno ukoliko ga �elite isklju�enog)"

#~ msgid "Germany"
#~ msgstr "Nema�ka"

#~ msgid "Germany (1TR6)"
#~ msgstr "Nema�ka (1TR6)"

#~ msgid "What do you wish to do?"
#~ msgstr "�ta �elite da uradite?"

#~ msgid "Install/Rescue"
#~ msgstr "Instaliraj/Sa�uvaj"

#~ msgid "Rescue"
#~ msgstr "Sa�uvaj"

#~ msgid "Which partition type do you want?"
#~ msgstr "Koji tip particije �elite?"

#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
#~ "already installed.\n"
#~ "\n"
#~ "\n"
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
#~ "this.\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!\n"
#~ msgstr ""
#~ "Izaberite \"Instalacija\" ako nemate ve� instaliran Linux, ili �elite\n"
#~ "da koristite vi�e distribucija ili verzija.\n"
#~ "\n"
#~ "Izaberite \"Spasavanje\" ako �elite da sa�uvate prethodnu \n"
#~ "verziju Mandrake-a Linux-a:\n"
#~ "\n"
#~ "\n"
#~ "Izaberite:\n"
#~ "\n"
#~ " - Automatski(preporu�eno) : Ukoliko niste do sada instalirali Linux.\n"
#~ "izaberite ovo.NAPOMENA:\n"
#~ "  mre�ne opcije ne�e biti pode�ene tokom instalacije,upotrebite\"LinuxConf"
#~ "\"\n"
#~ "  da bi konfigurisali mre�ne opcije nakon instalacije.\n"
#~ "\n"
#~ " - Sa pode�avanjima (Customized): Ukoliko ste upoznati sa Linux-om mo�i "
#~ "�ete\n"
#~ "da izaberete mod instalacije.\n"
#~ "   koji je zavisi od va�ih potreba nakon instalacije.Pogledajte ni�e za "
#~ "vi�e podataka.\n"
#~ "\n"
#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i �elite izuzetno\n"
#~ "podesivu instalaciju onda je ovo pravi mod za vas. Mo�i �ete izabrati\n"
#~ "kori��enje sistema kao \"Preporu�eno\".\n"
#~ "    Ali molim Vas, NEMOJTE BIRATI OVU OPCIJU UKOLIKO NE ZNATE �ta "
#~ "RADITE !\n"

#~ msgid ""
#~ "At this point, you may choose what partition(s) to use to install\n"
#~ "your Mandrake Linux system if they have been already defined (from a\n"
#~ "previous install of GNU/Linux or from another partitioning tool). In "
#~ "other\n"
#~ "cases, hard drive partitions must be defined. This operation consists of\n"
#~ "logically dividing the computer's hard drive capacity into separate\n"
#~ "areas for use.\n"
#~ "\n"
#~ "\n"
#~ "If you have to create new partitions, use \"Auto allocate\" to "
#~ "automatically\n"
#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
#~ "by\n"
#~ "clicking on \"hda\" for the first IDE drive,\n"
#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
#~ "\n"
#~ "\n"
#~ "Two common partition are: the root partition (/), which is the starting\n"
#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
#~ "all files necessary to start the operating system when the\n"
#~ "computer is first turned on.\n"
#~ "\n"
#~ "\n"
#~ "Because the effects of this process are usually irreversible, "
#~ "partitioning\n"
#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
#~ "simplifies the process so that it must not be. Consult the documentation\n"
#~ "and take your time before proceeding.\n"
#~ "\n"
#~ "\n"
#~ "You can reach any option using the keyboard: navigate through the "
#~ "partitions\n"
#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
#~ "\n"
#~ "- Ctrl-c  to create a new partition (when an empty partition is "
#~ "selected)\n"
#~ "\n"
#~ "- Ctrl-d  to delete a partition\n"
#~ "\n"
#~ "- Ctrl-m  to set the mount point\n"
#~ msgstr ""
#~ "Sada, mo�ete izabrati na koju particiju(e) �elite instalirati\n"
#~ "va� Mandrake Linux sistem ukoliko je(su) ona unapred odre�ena(e)\n"
#~ "(postoje�om Linux instalacijom ili nekim programom za particiranje "
#~ "diska).\n"
#~ "U drugim slu�ajevima particije na hard disku moraju biti definisane.\n"
#~ "Ova operacija se sastoji od logi�kog deljenja hard diska na nekoliko "
#~ "delova.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko morate da kreirate nove particije, koristite \"Auto dislociranje"
#~ "\"za automatsko kreiranje\n"
#~ "particija za Linux. Mo�ete izabrati diskza particiranje\n"
#~ "klikom na \"hda\" za prvi IDE disk, \"hdb\" za drugi ili\n"
#~ "\"sda\" za prvi SCSI disk i tako dalje.\n"
#~ "\n"
#~ "\n"
#~ "Dve glave particije su: root particija (/), koja je polazna ta�ka\n"
#~ "(direktorijum)\n"
#~ "hijerarhije fajl-sistema, i (/boot), koji sadr�i sve fajlove potrebne\n"
#~ "za podizanje operativnog sistema po uklju�enju ra�unara\n"
#~ "\n"
#~ "\n"
#~ "Po�to je proces particiranja diska obi�no nepovratan, obi�no je\n"
#~ "frustriraju�i i zastra�uju�i za po�etnike. DiskDrake pojednostavljuje\n"
#~ "proces da se to ne bi de�avalo. Pro�itajte dokumentaciju i ne �urite.\n"
#~ "\n"
#~ "\n"
#~ "Mo�ete pristupiti bilo kojoj opciji pomo�u tastature : kre�ite se kroz "
#~ "particije \n"
#~ "koriste�i  Tab i Up/Down tastere. Kada je particija izabrana,mo�ete "
#~ "koristiti: \n"
#~ "\n"
#~ "- Ctrl-c  za kreiranje nove particije (kada je izabrana prazna "
#~ "particija)\n"
#~ "\n"
#~ "- Ctrl-d  za brisanje  particije\n"
#~ "\n"
#~ "- Ctrl-m  za pode�avanje ta�ke montiranja \n"

#~ msgid ""
#~ "Any partitions that have been newly defined must be formatted for\n"
#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
#~ "wish to re-format some already existing partitions to erase the data\n"
#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
#~ "partitions, particularly if they contain files or data you wish to keep.\n"
#~ "Typically retained are /home and /usr/local."
#~ msgstr ""
#~ "Sve novoformirane particije moraju biti formatirane za upotrebu\n"
#~ "(formatiranje-kreiranje fajl-sistema). Ako �elite, mo�ete reformatirati\n"
#~ "ve� postoje�e particije da bi izbrisali podatke koje sadr�e.\n"
#~ "Napomena: nije neophodno ponovno formatiranje postoje�ih particija\n"
#~ "ukoliko �elite da sa�uvate podatke na njima. Oni se obi�no nalaze\n"
#~ "u /home i /usr/local direktorijumima."

#~ msgid ""
#~ "The packages selected are now being installed. This operation\n"
#~ "should take a few minutes unless you have chosen to upgrade an\n"
#~ "existing system, in that case it can take more time even before\n"
#~ "upgrade starts."
#~ msgstr ""
#~ "Izabrani paketi se instaliraju. Ova operacija bi trebala potrajti\n"
#~ "nekoliko minuta ukoliko niste izabrali a�uriranje\n"
#~ "na postoje�i sistem.U tom slu�aju potrebno je nesto vi�e vremena."

#~ msgid ""
#~ "If DrakX failed to find your mouse, or if you want to\n"
#~ "check what it has done, you will be presented the list of mice\n"
#~ "above.\n"
#~ "\n"
#~ "\n"
#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
#~ "Otherwise you may choose the mouse that more closely matches your own\n"
#~ "from the menu above.\n"
#~ "\n"
#~ "\n"
#~ "In case of a serial mouse, you will also have to tell DrakX\n"
#~ "which serial port it is connected to."
#~ msgstr ""
#~ "Ukoliko DrakX nije uspeo da na�e va�eg mi�a, ili �elite da proverite\n"
#~ "�ta je ura�eno, pogledajte na gore gde se nalazi lista\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko vam postavka odgovara, samo pre�ite na deo koji �elite\n"
#~ "klikom na meni na levoj strani. Ukoliko ne, izaberite tip mi�a u meniju\n"
#~ "za koji mislite da najvi�e odgovara va�em mi�u.\n"
#~ "\n"
#~ "\n"
#~ "U slu�aju da imate serijski mi�, mora�ete ozna�iti u DrakX-u na koji\n"
#~ "serijski port je priklju�en."

#~ msgid ""
#~ "This section is dedicated to configuring a local area\n"
#~ "network (LAN) or a modem.\n"
#~ "\n"
#~ "Choose \"Local LAN\" and DrakX will\n"
#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
#~ "should be found and initialized automatically.\n"
#~ "However, if your peripheral is ISA, autodetection will not work,\n"
#~ "and you will have to choose a driver from the list that will appear "
#~ "then.\n"
#~ "\n"
#~ "\n"
#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
#~ "in the first time, otherwise you will have to specify the options\n"
#~ "to the driver that you will have fetched from documentation of your\n"
#~ "hardware.\n"
#~ "\n"
#~ "\n"
#~ "If you install a Mandrake Linux system on a machine which is part\n"
#~ "of an already existing network, the network administrator will\n"
#~ "have given you all necessary information (IP address, network\n"
#~ "submask or netmask for short, and hostname). If you're setting\n"
#~ "up a private network at home for example, you should choose\n"
#~ "addresses.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
#~ "a modem will be configured. DrakX will try to find your modem,\n"
#~ "if it fails you will have to select the right serial port where\n"
#~ "your modem is connected to."
#~ msgstr ""
#~ "Ovaj deo je posve�en konfigurisanju lokalne mre�e (LAN) ili modema.\n"
#~ "\n"
#~ "Izaberite \"Lokalni mre�e\" i DrakX �e potra�iti Intranet adapter\n"
#~ "na va�oj ma�ini. PCI adapteri bi trebalo da se prona�u i iniciraju\n"
#~ "automatski. Me�utim, ukoliko su ISA, autodetekcija ne�e raditi, ve� "
#~ "treba\n"
#~ "da izaberete drajver sa liste koja �e se pojaviti.\n"
#~ "\n"
#~ "\n"
#~ "Za SCSI adaptere mo�ete pustiti da drajver pretra�i adapter, ili\n"
#~ "da unesete specifikacije u drajver na�ene u dokumentaciji va�eg\n"
#~ "hardvera.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko instalirate Mandrake Linux sistem na ma�inu koja je deo "
#~ "postoje�e\n"
#~ "mre�e, mre�ni administrator �e vam dati sve potrebne informacije\n"
#~ "(IP adresu, ime ma�ine i dr.) Ukoliko pode�avate privatnu mre�u\n"
#~ "u ku�i, sami birate adrese.\n"
#~ "\n"
#~ "\n"
#~ "Izaberite \"Biranje sa modemom\" i Internet konekcija sa modemom �e biti\n"
#~ "konfigurisana. DrakX �e tra�iti modem, ukoliko ga ne prona�e, morate\n"
#~ "ozna�iti serijski port na koji je povezan modem."

#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these\n"
#~ "types require a different setup. Note however that the print\n"
#~ "spooler uses 'lp' as the default printer name; so you\n"
#~ "must have one printer with such a name; but you can give\n"
#~ "several names, separated by '|' characters, to a printer.\n"
#~ "So, if you prefer to have a more meaningful name you just have\n"
#~ "to put it first, eg: \"My Printer|lp\".\n"
#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select\n"
#~ "\"Local printer\". You will then have to tell which port your\n"
#~ "printer is connected to, and select the appropriate filter.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine,\n"
#~ "you will have to select \"Remote lpd\". In order to make\n"
#~ "it work, no username or password is required, but you will need\n"
#~ "to know the name of the printing queue on this server.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a SMB printer (which means, a printer located\n"
#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
#~ "plus the username, workgroup and password required in order to\n"
#~ "access the printer, and of course the name of the printer. The same goes\n"
#~ "for a NetWare printer, except that you need no workgroup information."
#~ msgstr ""
#~ "Linux prepoznaje mnogo tipova �tampa�a. Svaki od njih zahteva\n"
#~ "druga�iju konfiguraciju.\n"
#~ "Zapamtite da spooler koristi 'lp' kao default ime �tampa�a,tako da\n"
#~ "morate imati bar 1 �tampa� sa tim imenom ali mu mo�ete dati vi�e\n"
#~ "imena odvojenih sa znakom '|',npr.: Epson Stylus 600|lp.\n"
#~ " �tampa� koji ima  \"lp\" u svom imenu(ima) je i  default �tampa�.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko je va� �tampa� direktno spojen sa ra�unarom, izaberite\n"
#~ "\"Lokalni �tampa�\". Mora�ete nazna�iti na koji je port �tampa� spojen,\n"
#~ "i izabrati odgovaraju�i filter.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko  �elite da pristupite �tampa�u lociranom na remote Unix ma�ini,\n"
#~ "morate izabrati  \"Remote lpd\".Da bi to funkcionisalo nije potrebno\n"
#~ "korisni�ko ime \n"
#~ "i lozinka ,ali vam je potrebno da znate ime  printing queue-a na "
#~ "serveru.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko �elite da pristupite mre�nom (SMB na Win 9x/NT ma�inama) "
#~ "�tampa�u\n"
#~ "treba da odredite njegovo SMB ime (koje nije i njegovo TCP/IP ime), i \n"
#~ "verovatno\n"
#~ "njegovu IP adresu, kao i korisni�ko ime, radnu grupu i lozinku "
#~ "(password)\n"
#~ "�to\n"
#~ "je sve potrebno da bi pristupili �tampa�u, i naravno ime �tampa�a. Isti\n"
#~ "postupak se poduzima i za NetWare �tampa�e, izuzev imena radne grupe."

#~ msgid ""
#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
#~ "boot into GNU/Linux any more."
#~ msgstr ""
#~ "Preporu�ujemo da ovde odgovorite \"Da\". Ukoliko instalirate MS Windows\n"
#~ "sa kasnijim datumom on �e sam upisati novi boot sektor.\n"
#~ "Ukoliko niste napravili startnu disketu, ne�ete vi�e mo�i podi�i Linux."

#~ msgid "Move your wheel!"
#~ msgstr "Pomerite va� to�ki�"

#~ msgid "Forget the changes?"
#~ msgstr "Ne pamtiti promene?"

#~ msgid "What is the type of your mouse?"
#~ msgstr "Koji tip mi�a imate?"

#~ msgid "Automatic resolutions"
#~ msgstr "Automatsko pode�avanje rezolucije"

#~ msgid ""
#~ "To find the available resolutions I will try different ones.\n"
#~ "Your screen will blink...\n"
#~ "You can switch if off if you want, you'll hear a beep when it's over"
#~ msgstr ""
#~ "Da bi prona�li odgovaraju�u rezoluciju poku�a�emo sa drugim.\n"
#~ "Va� ekran �e blinkati...\n"
#~ "Mo�ete ugasiti monitor ako �elite, kraj �e biti ozna�en zvu�nim signalom"

#~ msgid ""
#~ "I can try to find the available resolutions (eg: 800x600).\n"
#~ "Sometimes, though, it may hang the machine.\n"
#~ "Do you want to try?"
#~ msgstr ""
#~ "Mogu poku�ati da prona�em odgovaraju�u rezoluciju (npr: 800x600).\n"
#~ "Ipak, to mo�e dovesti do blokiranja ra�unara.\n"
#~ "Da li �elite poku�ati?"

#~ msgid ""
#~ "No valid modes found\n"
#~ "Try with another video card or monitor"
#~ msgstr ""
#~ "Nije prona�en odgovaraju�i mod\n"
#~ "Poku�ajte sa drugom grafi�kom karticom ili monitorom"

#~ msgid "Automatical resolutions search"
#~ msgstr "Automatsko tra�enje rezolucije"

#~ msgid "pump"
#~ msgstr "pump"

#~ msgid "dhcpxd"
#~ msgstr "dhcpxd"

#~ msgid "dhcp-client"
#~ msgstr "dhcp-klijent"

#~ msgid "Apple ADB Mouse"
#~ msgstr "Apple ADB Mi� "

#~ msgid "Apple ADB Mouse (2 Buttons)"
#~ msgstr "Apple ADB Mi� (2 tastera)"

#~ msgid "Apple ADB Mouse (3+ Buttons)"
#~ msgstr "Apple ADB Mi� (3+ tastera)"

#~ msgid "Apple USB Mouse"
#~ msgstr "Apple ADB Mi�"

#~ msgid "Apple USB Mouse (2 Buttons)"
#~ msgstr "Apple USB Mi� (2tastera)"

#~ msgid "Apple USB Mouse (3+ Buttons)"
#~ msgstr "Apple USB Mi� (3+ tastera)"

#~ msgid "ASCII MieMouse"
#~ msgstr "ASCII MieMouse"

#~ msgid "Genius NetMouse Pro"
#~ msgstr "Genius NetMouse Pro"

#~ msgid "ATI Bus Mouse"
#~ msgstr "ATI Bus Mi�"

#~ msgid "Microsoft Bus Mouse"
#~ msgstr "Microsoft  Bus Mi�"

#~ msgid "Logitech Bus Mouse"
#~ msgstr "Logitech Bus Mi�"

#~ msgid "USB Mouse (3 buttons or more)"
#~ msgstr "USB Mi� (3 tastera ili vi�e)"

#~ msgid "Microsoft Rev 2.1A or higher (serial)"
#~ msgstr "Microsoft Rev 2.1A ili noviji (serijski)"

#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijski)"

#~ msgid "ASCII MieMouse (serial)"
#~ msgstr "ASCII MieMouse (serijski)"

#~ msgid "Genius NetMouse (serial)"
#~ msgstr "Genius NetMouse (serijski)"

#~ msgid "Generic Mouse (serial)"
#~ msgstr "Generi�ki mi� (serijski)"

#~ msgid "Microsoft compatible (serial)"
#~ msgstr "Microsoft kompatibilan (serijski)"

#~ msgid "Generic 3 Button Mouse (serial)"
#~ msgstr "Generi�ki 3 tastera mi� (serijski)"

#~ msgid "Kensington Thinking Mouse (serial)"
#~ msgstr "Kensington Thinking Mouse (serijski)"

#~ msgid ""
#~ "I need to configure your network adapter to be able to connect to "
#~ "internet."
#~ msgstr ""
#~ "Potrebno je konfigurisanje mre�nog adaptera da bi se mogli konektovati na "
#~ "internet."

#~ msgid ""
#~ "Please choose which network adapter do you want to use to connect to "
#~ "internet.\n"
#~ "If you don't know, choose eth0.\n"
#~ msgstr ""
#~ "Izaberite koji mre�ni adapter �elite da koristite za konekcijuna "
#~ "internett.\n"
#~ "Ukoliko ne znate, izaberite eth0.\n"

#~ msgid "nfs mount failed"
#~ msgstr "nfs montiranje nije uspelo"

#~ msgid "Socket"
#~ msgstr "Priklju�ak"

#~ msgid ""
#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
#~ "By default, the 4.0 server is used unless your card is not supported.\n"
#~ "\n"
#~ "Do you want to keep XFree 3.3?"
#~ msgstr ""
#~ "DrakX �e generisati konfiguracione fajlove  za XFree 3.3 kao i za XFree "
#~ "4.0.\n"
#~ "Po default-u , 4.0 server se koristi osim ako va�a kartica nije "
#~ "podr�ana.\n"
#~ "\n"
#~ "Da li �elite da zadr�ite  XFree 3.3?"

#~ msgid "Cryptographic"
#~ msgstr "Kriptografski"

#~ msgid "Configure LAN"
#~ msgstr "Konfigurisanje LAN mre�e"

#~ msgid "End configuration"
#~ msgstr "Kraj konfiguracije"

#~ msgid "Do not set up networking"
#~ msgstr "Nemoj pode�avati mre�u"

#~ msgid "Do you want to configure a local network for your system?"
#~ msgstr "Da li �elite da podesite lokalnu mre�u za va� sistem?"

#~ msgid "Show less"
#~ msgstr "Prika�i manje"

#~ msgid "Show more"
#~ msgstr "Prika�i vi�e"

#~ msgid "URI for Local printer"
#~ msgstr "URI ili lokalni  �tampa�"

#~ msgid "Local Printer Device (URI)"
#~ msgstr "Lokalni ure�aj za �tampa� (URI)"

#~ msgid ""
#~ "What URI device is your printer connected to\n"
#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
#~ msgstr ""
#~ "Na koji URI ure�aj je va� �tampa� povezan \n"
#~ "(paralelni /dev/lp0 odgovara LPT1:)?\n"

#~ msgid "tie"
#~ msgstr "kravata"

#~ msgid "brunette"
#~ msgstr "crnka"

#~ msgid "girl"
#~ msgstr "devojka"

#~ msgid "woman-blond"
#~ msgstr "plavu�a"

#~ msgid "automagic"
#~ msgstr "Automagija"

#~ msgid "Network:"
#~ msgstr "Mre�a:"

#~ msgid "Everything configured!"
#~ msgstr "Sve je konfigurisano !"

#~ msgid "What is your keyboard layout?"
#~ msgstr "Koju vrstu tastature imate?"

#~ msgid "pptp alcatel"
#~ msgstr "pptp alcatel"

#~ msgid "Try to find PCMCIA cards?"
#~ msgstr "Da li da tra�im PCMCIA kartice ?"

#~ msgid "Try to find %s devices?"
#~ msgstr "Da li da tra�im %s ure�aje ?"

#~ msgid "Small(%dMB)"
#~ msgstr "Malo (%dMB)"

#~ msgid "Modem Configuration"
#~ msgstr "Konfiguracija modema"

#~ msgid ""
#~ "Do you want to configure a dialup connection with modem for your system?"
#~ msgstr "Da li �elite da podesite  dialup konekciju za modem za va� sistem?"

#~ msgid "Do you want to configure a ISDN connection for your system?"
#~ msgstr "Da li �elite da podesite ISDN konekciju  za va� sistem?"

#~ msgid "Try to find PCI devices?"
#~ msgstr "Da li da tra�im PCI ure�aje ?"

#~ msgid "Searching root partition."
#~ msgstr "Tra�im root particiju."

#~ msgid "%s: This is not a root partition, please select another one."
#~ msgstr "%s: Ovo nije root particija, izaberite neku drugu."

#~ msgid "Please choose a partition to use as your root partition."
#~ msgstr "Izaberite koju particiju �elite da korisite kao root particiju"

#~ msgid "Autologin at startup"
#~ msgstr "Auto logovanje pri startanju sistema"

#~ msgid "Autologin - Choose default user"
#~ msgstr "Auto logovanje - izaberite default (osnovnog) korisnika"

#~ msgid "You don't have any windows partitions!"
#~ msgstr "Nemate nijednu Windows particiju!"

#~ msgid "You don't have any enough room for Lnx4win"
#~ msgstr "Nemate mesta na particiji za Lnx4win!"

#~ msgid ", %U MB"
#~ msgstr ", %U MB"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is then suggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
# When possible cp437 accentuated letters can be used too.
#
#~ msgid ""
#~ "Welcome to LILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
#~ "for default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Dobrodosli u LILO starter operativnih sistema !\n"
#~ "\n"
#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
#~ "\n"
#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS-a.\n"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is then suggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
# When possible cp437 accentuated letters can be used too.
#
#~ msgid ""
#~ "Welcome to SILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or\n"
#~ "wait %d seconds for default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Dobrodosli u SILO, menadzer za startanje operativnih sistema !\n"
#~ "\n"
#~ "Za prikaz mogucih opcija, pritisnite <TAB>.\n"
#~ "\n"
#~ "Za startanje jedne od njih, upisite njeno ime i pritisnite <ENTER>\n"
#~ "ili sacekate %d sekundi za startanje pretpostavljenog OS.\n"

#~ msgid "SILO main options"
#~ msgstr "SILO glavne opcije"

#~ msgid ""
#~ "Here are the following entries in SILO.\n"
#~ "You can add some more or change the existing ones."
#~ msgstr ""
#~ "Ovo su postavljne opcije u SILO-u.\n"
#~ "Mo�ete dodati nove ili izmeniti stare."

#~ msgid "This label is already in use"
#~ msgstr "Ova oznaka je ve� u upotrebi"

#~ msgid "Installation of SILO failed. The following error occured:"
#~ msgstr "Instalacija SILO-a neuspela. Gre�ka je:"

#~ msgid ""
#~ "DrakX will attempt at first to look for one or more PCI\n"
#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
#~ "to use, it will insert it (them)  automatically.\n"
#~ "\n"
#~ "\n"
#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
#~ "doesn't know which driver to use for this card, or if you have no\n"
#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
#~ "will have to select one.\n"
#~ "\n"
#~ "\n"
#~ "After you have selected the driver, DrakX will ask if you\n"
#~ "want to specify options for it. First, try and let the driver\n"
#~ "probe for the hardware: it usually works fine.\n"
#~ "\n"
#~ "\n"
#~ "If not, do not forget the information on your hardware that you\n"
#~ "could get from your documentation or from Windows (if you have it\n"
#~ "on your system), as suggested by the installation guide. These\n"
#~ "are the options you will need to provide to the driver."
#~ msgstr ""
#~ "DrakX �e prvo potra�iti jedan ili vi�e PCI\n"
#~ "SCSI adapter(a). Ukoliko ga(ih) prona�e i ima drajver(e)\n"
#~ "za njih, automatski �e ih instalirati.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko je va� SCSI adapter ISA, ili je PCI ali DrakX nije mogao\n"
#~ "odrediti odgovaraju�i drajver, ili ukoliko uop�te nemate SCSI,\n"
#~ "bi�ete upitani da li ih imate. Ukoliko ih nemate, odgovorite sa \"Ne\".\n"
#~ "Ukoliko ih imate jedan ili vi�e, odgovorite sa \"Da\". Dobi�ete popis\n"
#~ "drajvera, iz kojeg �ete izabrati jedan.\n"
#~ "\n"
#~ "\n"
#~ "Nakon �to izaberete drajver, DrakX �e vas pitati da li �elite\n"
#~ "specificirate opcije za njega. Prvo, dozvolite da drajver ispita\n"
#~ "hardver: to obi�no uspe.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko to nije slu�aj, pregledajte dokumentaciju ili podatke preuzmite\n"
#~ "iz Windows-a ako ga imate na ra�unaru, pa nadalje sa tim podacima\n"
#~ "prosledite drajveru."

#~ msgid "Shutting down"
#~ msgstr "Gasim ma�inu"

#~ msgid "useless"
#~ msgstr "beskorisno"

#~ msgid "Do you want to use LILO?"
#~ msgstr "Da li �elite da koristite LILO ?"

#~ msgid ""
#~ "You may now select the packages you wish to install.\n"
#~ "\n"
#~ "\n"
#~ "First you can select group of package to install or upgrade. After that\n"
#~ "you can select more packages according to the total size you wish to\n"
#~ "select.\n"
#~ "\n"
#~ "\n"
#~ "If you are in expert mode, you can select packages individually.\n"
#~ "Please note that some packages require the installation of others.\n"
#~ "These are referred to as package dependencies. The packages you select,\n"
#~ "and the packages they require will be automatically selected for\n"
#~ "install. It is impossible to install a package without installing all\n"
#~ "of its dependencies."
#~ msgstr ""
#~ "Mo�ete izabrati pakete koje �elite instalirati.\n"
#~ "\n"
#~ "\n"
#~ "Prvo mo�ete birati da li �elite punu instalaciju ili preinstalaciju\n"
#~ "na postoje�u. Nakon toga birate pakete uzimaju�i u obzir ukupnu veli�inu\n"
#~ "odabranog.\n"
#~ "\n"
#~ "\n"
#~ "Ako se nalazite u ekspert modu, pakete birate pojedina�no.\n"
#~ "Uzmite u obzir da neki paketi zahtevaju instalaciju drugih,\n"
#~ "pa �e i oni biti automatski instalirani."

#~ msgid ""
#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
#~ "Normally they are correctly detected during installation. If you don't\n"
#~ "see yours detected, you can add one or more now.\n"
#~ "\n"
#~ "\n"
#~ "If you don't want that everybody could access at one of them, you can "
#~ "remove\n"
#~ "it now (a boot disk will be needed to boot it)."
#~ msgstr ""
#~ "LILO (Linux starter) mo�e startati Linux kao i druge operativne sisteme.\n"
#~ "Oni se obi�no ispravno detektuju pri samoj instalaciji. Ukoliko ne,\n"
#~ "mo�ete ih sada dodati.\n"
#~ "\n"
#~ "\n"
#~ "Ukoliko NE �elite da svako mo�e da im pristupi, mo�ete ga ukloniti sada.\n"
#~ "(Za podizanje sistema �e vam tada biti potrebna startna disketa)."

#~ msgid ""
#~ "Now that you've selected desired groups, please choose \n"
#~ "how many packages you want, ranging from minimal to full \n"
#~ "installation of each selected groups."
#~ msgstr ""
#~ "Sada kada ste izabrali grupe,izaberite \n"
#~ "koliko paketa �elite,biraju�i od minimalne do maksimalne\n"
#~ "instalacije svake odabrane grupe."

#~ msgid ""
#~ "You need %dMB for a full install of the groups you selected.\n"
#~ "You can go on anyway, but be warned that you won't get all packages"
#~ msgstr ""
#~ "Morate imati %dMB za punu instalaciju grupa koje ste izabrali.\n"
#~ "Mo�ete i  nastaviti,ali znajte da ne�ete imati sve�to je izabrano."

#~ msgid "Choose other CD to install"
#~ msgstr "Izaberi drugi CD za instalaciju"

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed Linux before.\n"
#~ "\n"
#~ "\n"
#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
#~ "select the usage for the installed system between normal, development or\n"
#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
#~ "computer. You may choose \"Development\" if you will be using the "
#~ "computer\n"
#~ "primarily for software development, or choose \"Server\" if you wish to\n"
#~ "install a general purpose server (for mail, printing...).\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
#~ "a highly customized installation, this Install Class is for you. You "
#~ "will\n"
#~ "be able to select the usage of your installed system as for \"Customized"
#~ "\"."
#~ msgstr ""
#~ "Izaberite:\n"
#~ "\n"
#~ " - Preporu�eno: Ukoliko niste do sada instalirali Linux.\n"
#~ "\n"
#~ "\n"
#~ " - Sa pode�avanjima (Customized): Ukoliko ste upoznati sa Linux-om mo�i "
#~ "�ete\n"
#~ "da izaberete normal,development ili server mod instalacije.\n"
#~ "Izaberite \"Normal\" instalaciju pri uobi�ajenom kori��enju ra�unara\n"
#~ "Mo�ete izabrati \"Development\" instalaciju ukoliko �ete se prvenstveno\n"
#~ "razvojem softvera, ili \"Server\" ukoliko �elite da postavite standardnu\n"
#~ "server ma�inu (za mail, �tampanje...)\n"
#~ "\n"
#~ "\n"
#~ " - Ekspert: Ukoliko ste dobro poznajte GNU/Linux i �elite izuzetno\n"
#~ "podesivu instalaciju onda je ovo pravi mod za vas. Mo�i �ete izabrati\n"
#~ "kori��enje sistema kao \"Preporu�eno\"."

#~ msgid "Setup SCSI"
#~ msgstr "Podesi SCSI"

#~ msgid "Installation CD Nr %s"
#~ msgstr "Instalacija CD Br.%s"

#~ msgid ""
#~ "Update installation image!\n"
#~ "\n"
#~ "Ask your system administrator or reboot to update your installation image "
#~ "to include\n"
#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
#~ "press Cancel\n"
#~ "to avoid installation from this Cd-Rom image."
#~ msgstr ""
#~ "Napravite update instalacionog image-a!\n"
#~ "Pitajte sistem administratora ili rebutujte radi  update instalacionog  "
#~ "image-aradi  Cd-Rom image-a ozna�enog sa  \"%s\".Pritisnite Ok ukoliko je "
#~ "image update-ovan ili pritisnite  Cancel\n"
#~ "za prekid instalacije Cd-Rom image-a."

#~ msgid "Which language do you want?"
#~ msgstr "Koji jezik �elite ?"

#~ msgid "Hurt me plenty"
#~ msgstr "Razbij me"

#~ msgid "Which packages do you want to install"
#~ msgstr "Izaberi pakete za instalaciju"

#~ msgid "Downloading cryptographic packages"
#~ msgstr "Skidam kripto pakete"

#~ msgid "Local LAN"
#~ msgstr "Lokalna mre�a LAN"

#~ msgid "Installation CD Nr 1"
#~ msgstr "Instalacioni  CD Br. 1"

#~ msgid "expert"
#~ msgstr "ekspert"

#~ msgid "developer"
#~ msgstr "developer"

#~ msgid "beginner"
#~ msgstr "po�etnik"

#~ msgid "Linear (needed for some SCSI drives)"
#~ msgstr "Koristi linearni mod (potreban nekim SCSI drajvovima)"

#~ msgid "linear"
#~ msgstr "linear"

#~ msgid "After %s partition %s,"
#~ msgstr "Posle %s particija %s,"

#~ msgid "changing type of"
#~ msgstr "menjanje tipa"

#~ msgid "formatting"
#~ msgstr "formatiranje"

#~ msgid "resizing"
#~ msgstr "promena veli�ine"

#~ msgid "Size: %s MB"
#~ msgstr "Veli�ina: %s MB"

#~ msgid "Bad kickstart file %s (failed %s)"
#~ msgstr "Pogre�an kickstart datoteka %s (nije uspeo %s)"

#~ msgid "Going to install %d MB. You can choose to install more programs"
#~ msgstr "Instalira�u %d MB. Mo�ete izabrati da instalirate jo� programa"

#~ msgid "Password:"
#~ msgstr "Lozinka:"

#~ msgid "User name:"
#~ msgstr "Korisni�ko ime:"

#~ msgid ""
#~ "Enter a floppy to create an HTP enabled boot\n"
#~ "(all data on floppy will be lost)"
#~ msgstr ""
#~ "Ubacite disketu u ure�aj za kreiranje  HTP boot diskete\n"
#~ "(Svi podaci na disketi �e biti izbrisani !)"

#~ msgid "A entry %s already exists"
#~ msgstr "Unos %s ve� postoji"

#~ msgid "Choose install or upgrade"
#~ msgstr "Instalacija ili a�uriranje"

#~ msgid "What usage do you want?"
#~ msgstr "Izaberite ko�e kori��enje �elite"