# translation of DrakX-sc.po to Sardu
# Copyright (C) 2005 Free Software Foundation, Inc.
# Antoni Pistis <antonio.pistis@virgilio.it>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-sc\n"
"POT-Creation-Date: 2006-01-26 11:06+0100\n"
"PO-Revision-Date: 2005-09-14 11:29+0100\n"
"Last-Translator: Antoni Pistis <antonio.pistis@virgilio.it>\n"
"Language-Team: Sardu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Cali crai USB bolis a formatai?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Megas a formatai unu trastu USB \"%s\". Custu at a burrai totu su ki dui "
"est.\n"
"Assiguradì ki su trastu sçoberau siat sa crai USB ki bolis formatai. Ti "
"cunsillaus\n"
"de bogai totu is atrus trastus de stuju USB in su mentris ki fais custu."

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "No fait a scriri in sa crai"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Sa crai parit ki tenjat amparu de scriidura. Bogadda,\n"
"boga s'amparu de scriidura e torradda a ponni."

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Torra a provai"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Sighi sentza de crai USB"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Sa crai USB parit ki tenjat amparu de scriidura, ma no da podeus bogai\n"
"in siguresa imoi.\n"
"\n"
"\n"
"Crica su butoni po torrai a allui sa màkina, bogadda, boga s'amparu de\n"
"scriidura, torradda a ponni e a lançai Mandriva Move."

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1303
#, c-format
msgid "Reboot"
msgstr "Torra a allui"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Sa crai USB no tenit pratziduras Windows (FAT) bàlidas.\n"
"Si ndi serbit una po andai innantis (in prus, est prus standard,\n"
"aici de podi movi is dadus tuus e nci lompi de màkinas ki nci\n"
"girat Windows). Poni una crai USB cun d-una pratzidura Windows\n"
"a su mancu.\n"
"\n"
"\n"
"Podis sighiri finas sentza de crai USB - as a podi ancora\n"
"imprea Mandriva Move ke unu Sistema Obradori Mandriva\n"
"normali live."

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"No eus agatau crai USB in su sistema. Ki ponis\n"
"una crai USB imoi, Mandriva Move at a podi sarvai\n"
"is dadus in siguresa in sa directory home tua e in su\n"
"assètiu generali de sistema, po atra alluidura in custa\n"
"computadora o in d-una atra. Mi': ki ponis una crai imoi,\n"
"abeta unus cantu segundus innantis de da circai torra.\n"
"\n"
"\n"
"Podis sighiri finas sentza de crai USB - as a podi ancora\n"
"imprea Mandriva Move ke unu Sistema Obradori Mandriva\n"
"normali live."

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Ti serbit una crai USB po sarvai is dadus tuus"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Torra a circai sa crai USB"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Assètiu sa crai USB"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Abeta, assètiu is file de assètiu de sistema in sa crai USB..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "Intra is scedas tuas, po su screensaver apu a impreai sa password"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Assètiu automàtigu"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Abeta, circu e assètiu is trastus..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:231
#: diskdrake/interactive.pm:244 diskdrake/interactive.pm:405
#: diskdrake/interactive.pm:423 diskdrake/interactive.pm:560
#: diskdrake/interactive.pm:565 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:837 network/netconnect.pm:866
#: network/netconnect.pm:965 network/netconnect.pm:969
#: network/netconnect.pm:973 network/netconnect.pm:978
#: network/netconnect.pm:1123 network/netconnect.pm:1127
#: network/netconnect.pm:1246 network/netconnect.pm:1251
#: network/netconnect.pm:1271 network/netconnect.pm:1428
#: network/thirdparty.pm:321 network/thirdparty.pm:328
#: network/thirdparty.pm:372 network/thirdparty.pm:374
#: network/thirdparty.pm:395 network/thirdparty.pm:419
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
#: printer/printerdrake.pm:2512 printer/printerdrake.pm:2947
#: printer/printerdrake.pm:3231 printer/printerdrake.pm:3237
#: printer/printerdrake.pm:3802 printer/printerdrake.pm:3806
#: printer/printerdrake.pm:3810 printer/printerdrake.pm:4206
#: printer/printerdrake.pm:4446 printer/printerdrake.pm:4474
#: printer/printerdrake.pm:4551 printer/printerdrake.pm:4617
#: printer/printerdrake.pm:4737 standalone/drakTermServ:422
#: standalone/drakTermServ:492 standalone/drakTermServ:501
#: standalone/drakTermServ:812 standalone/drakTermServ:819
#: standalone/drakTermServ:845 standalone/drakTermServ:894
#: standalone/drakTermServ:1146 standalone/drakTermServ:1181
#: standalone/drakTermServ:1634 standalone/drakTermServ:1643
#: standalone/drakTermServ:1651 standalone/drakTermServ:1656
#: standalone/drakTermServ:1664 standalone/drakTermServ:1680
#: standalone/drakTermServ:1700 standalone/drakauth:36
#: standalone/drakbackup:510 standalone/drakbackup:624
#: standalone/drakbackup:1104 standalone/drakbackup:1135
#: standalone/drakbackup:1320 standalone/drakbackup:1652
#: standalone/drakbackup:1808 standalone/drakbackup:2536
#: standalone/drakbackup:4446 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:384
#: standalone/draksambashare:388 standalone/draksambashare:391
#: standalone/draksambashare:394 standalone/draksambashare:453
#: standalone/draksambashare:477 standalone/draksambashare:551
#: standalone/draksambashare:633 standalone/draksambashare:700
#: standalone/draksambashare:800 standalone/draksambashare:807
#: standalone/draksambashare:942 standalone/draksambashare:1133
#: standalone/draksambashare:1142 standalone/draksambashare:1151
#: standalone/draksambashare:1172 standalone/draksambashare:1181
#: standalone/draksambashare:1190 standalone/draksambashare:1210
#: standalone/draksambashare:1218 standalone/draksambashare:1230
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:70 standalone/logdrake:171
#: standalone/logdrake:439 standalone/logdrake:444 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:732 standalone/scannerdrake:743
#: standalone/scannerdrake:882 standalone/scannerdrake:893
#: standalone/scannerdrake:963 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Faddina"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Faddina. No sciu comenti ndi bessiri beni.\n"
"Sighi a perìgulu tuu."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Faddina"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Dui est stètia una faddina:\n"
"\n"
"\n"
"%s\n"
"\n"
"Custa podit benni de file de assètiu de sistema purdiaus\n"
"in sa crai USB, ki est de aici burrendiddus e apustis\n"
"torrendi a allui Mandriva Move iast a depi arresolvi. Po du\n"
"fai, crica in su butoni apostu.\n"
"\n"
"\n"
"Forsis bolis torrai a allui e arremovi sa crai USB, o\n"
"esaminai su ki dui est asuta de atru OS, o fintzas castiai\n"
"is file de arrelatu in is console #3 e #4 po provai a\n"
"intzertai ita est sutzedendi."

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Burra is file de assètiu de su sistema"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Torra feti a allui"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Podis andai feti sentza de suportu CDROM"

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Boci custus programas"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Nisçunu suportu CDROM"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1062 diskdrake/interactive.pm:1072
#: diskdrake/interactive.pm:1125
#, c-format
msgid "Read carefully!"
msgstr "Ligi cun coidau!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"No fait a impreai un'atru CDROM candu is programas ki sighint funt "
"girendi: \n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Còpiu in memòria po ti permiti de bogai su CDROM"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB o prus"

#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "X server"

#: Xconfig/card.pm:163
#, c-format
msgid "Choose an X server"
msgstr "Sçobera unu X server"

#: Xconfig/card.pm:195
#, c-format
msgid "Multi-head configuration"
msgstr "Assètiu multi-head"

#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Su sistema suportat assètius a (multi-head).\n"
"Ita bolis fai?"

#: Xconfig/card.pm:265
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "No fait a aposentai su pakitu Xorg: %s"

#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Sçobera su manniori de memòria de sa skeda gràfiga"

#: Xconfig/card.pm:371
#, c-format
msgid "Xorg configuration"
msgstr "Assètiu de Xorg"

#: Xconfig/card.pm:373
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Cali assètiu de Xorg bolis tenni?"

#: Xconfig/card.pm:406
#, c-format
msgid "Configure all heads independently"
msgstr "Assètia totu is concas (head) una a una"

#: Xconfig/card.pm:407
#, c-format
msgid "Use Xinerama extension"
msgstr "Imprea alladiaduras Xinerama"

#: Xconfig/card.pm:412
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Assètia feti sa skeda \"%s\"%s"

#: Xconfig/card.pm:424 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:431 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s cun allestradura 3D hardware"

#: Xconfig/card.pm:433
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Podis tenni su suportu po allestradura 3D hardware cun Xorg %s."

#: Xconfig/card.pm:439
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s cun allestradura 3D hardware SPERIMENTALI"

#: Xconfig/card.pm:441
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Sa skeda podit tenni aceleradura 3D hardware cun Xorg %s,\n"
"MI' CA EST SPERIMENTALI E PODIT ARROCAI SA COMPUTADORA."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:1009
#, c-format
msgid "Custom"
msgstr "Personalisada"

#: Xconfig/main.pm:127 any.pm:730 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:1303 printer/printerdrake.pm:882
#: printer/printerdrake.pm:899 printer/printerdrake.pm:4546
#: printer/printerdrake.pm:5010 standalone/drakhosts:263
#: standalone/drakroam:230 standalone/draksplash:93 standalone/logdrake:176
#: standalone/net_applet:103 standalone/scannerdrake:494
#, c-format
msgid "Quit"
msgstr "Bessi"

#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Skeda gràfiga"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Bisori"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:289
#, c-format
msgid "Resolution"
msgstr "Arresolutzioni"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Test"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:449
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:493
#: standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Sceras"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "Su file de assètiu de Xorg est purdiau, d'eus a innyorai."

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Sarvai is mudas?\n"
"S'assètiu imoi est:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Sçobera unu bisori po sa conca #%d"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Sçobera unu bisori"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Genèrigu"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Produsidori"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Controllu Plug'n Play faddiu. Sçobera su bisori justu"

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Is duus paràmetrus perigulosus funt sa frecuèntzia de arrecasçu strantaxa,\n"
"est a nai sa de totu su bisori, e prus ancora sa frecuèntzia crocada, ki "
"est\n"
"sa frecuèntzia de amostu de is arrayas.\n"
"\n"
"Est DE IMPORTU MANNU ki no ponjas unu tipu de bisori cun frecuèntzia\n"
"prus arta de sa ki podit donai su bisori tuu: iast a podi adanniai su "
"bisori.\n"
" Ki ses in duda, sçobera unu assètiu moderau."

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Frecuèntzia de arrecasçu crocau"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Frecuèntzia de arrecasçu strantaxu"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 coloris (8 bits)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 milla coloris (15 bits)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 milla coloris (16 bits)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 millionis de coloris (24 bits)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Arresolutzionis"

#: Xconfig/resolution_and_depth.pm:311 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1594 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Atru"

#: Xconfig/resolution_and_depth.pm:360
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Sçobera s'arresolutzioni e sa profundidadi de colori"

#: Xconfig/resolution_and_depth.pm:361
#, c-format
msgid "Graphics card: %s"
msgstr "Skeda gràfiga: %s"

#: Xconfig/resolution_and_depth.pm:375 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:222 standalone/drakTermServ:543
#: standalone/drakbackup:1360 standalone/drakbackup:4106
#: standalone/drakbackup:4166 standalone/drakbackup:4210
#: standalone/drakbackup:4464 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
#: standalone/draksplash:173 standalone/drakups:210 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "Ok"

#: Xconfig/resolution_and_depth.pm:375 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:406
#: install_steps_interactive.pm:811 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3882 standalone/drakautoinst:215
#: standalone/drakbackup:1360 standalone/drakbackup:4035
#: standalone/drakbackup:4039 standalone/drakbackup:4094
#: standalone/drakbackup:4464 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
#: standalone/draksplash:173 standalone/drakups:217 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Annudda"

#: Xconfig/resolution_and_depth.pm:375 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:311
#: standalone/drakbackup:4031 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Ajudu"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Test de s'assètiu"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Bolis fai su test de s'assètiu?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Atentu: "

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Faddina:\n"
"%s\n"
"Prova a mudai cancu paràmetru"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Bessu aintru de %d segundus"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Est s'assètiu justu?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Skema de su tecrau: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tipu de sòrixi: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Trastu sòrixi: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Bisori: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frecuèntzia Bisori crocada: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Frecuèntzia Bisori strantaxa: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Skeda gràfiga: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memòria gràfiga: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Profundidadi de colori: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Arresolutzioni: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg driver: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Interfaci gràfiga a s'alluidura"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Potzu assetiai sa computadora po allui in automàtigu s'interfaci gràfiga "
"(Xorg) a s'alluidura.\n"
"Bolis a fai partiri Xorg candu torras a allui?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Sa skeda gràfiga parit ki tenjat unu acàpiu TV-OUT.\n"
"Fait a d'assetiai po traballai in frame-buffer.\n"
"\n"
"Po custu depis acapiai sa skeda a sa TV innantis de torrai a allui sa "
"computadora.\n"
"Apustis sçobera sa boxi \"TVout\" in su bootloader\n"
"\n"
"Bolis tenni custa possibilidadi?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "De cali standard est sa TV?"

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "atru"

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:99 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:209
#, c-format
msgid "Please wait"
msgstr "Abeta"

#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Aposentadura de su bootloader in cursu"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO bolis donai unu Volume ID nou a su trastu %s. Comuncas, mudai su\n"
"Volume ID de unu discu de alluidura de Windows NT, 2000 o XP est faddina\n"
"mortali po Windows. Custu no balit po Windows 95 o 98 o discus dadus NT.\n"
"\n"
"Donas unu Volume ID nou?"

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
"Aposentadura de su bootloader faddia. Dui est stètia sa faddina ki sighit:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Primu segadura de su discu (MBR)"

#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Primu segadura de sa pratzidura root"

#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "In d-unu floppy"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4203
#, c-format
msgid "Skip"
msgstr "Lassa a perdi"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Aposentadura de LILO/Grub"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Aundi bolis aposentai su bootloader?"

#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Assètiu de su Stili de Boot"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Sceras fundamentalis de su bootloader"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Dona sa mesura de sa RAM in MB"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Sa scera ``Restrict command line options'' no balit sentza de una password"

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Is password no cunsonant"

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1336
#, c-format
msgid "Please try again"
msgstr "Prova ancora"

#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader de impreai"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Trastu de alluidura"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Arretradu innantis de allui sa màgini predefinia"

#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Abiva ACPI"

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr "Bai sentza de APIC"

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr "Bai sentza de APIC locali"

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:584 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1638
#: standalone/drakbackup:3626 standalone/drakups:297
#, c-format
msgid "Password"
msgstr "Password"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Password (torra)"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr ""

#: any.pm:296
#, c-format
msgid "restrict"
msgstr ""

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Lìmpia /tmp a dònnia alluidura"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Indida sa mesura de sa RAM ki serbit (agataus %d MB)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "Missada de Init"

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr ""

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""

#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Abivu alluidura de CD?"

#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "Abivu alluidura OF?"

#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "OS predefiniu?"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "Màgini"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr ""

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Modalidadi gràfiga"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "Profilu de arretza"

#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:450
#, c-format
msgid "Label"
msgstr "Etiketa"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2092
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Predefiniu"

#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"

#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "No fait a lassai sbuida sa boxi"

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Depis indidai una màgini de kernel"

#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Depis indidai una pratzidura arrèxini"

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Custa boxi dui est jai"

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Ita tipu de boxi bolis açungi?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Atru OS (SunOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Atru OS (MacOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Atru OS (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Innoi dui funt is boxis de sa lista de alluidura finas a imoi.\n"
"Podis açungi atras boxis o mudai is ki nci funt."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "acessu a programas X"

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "acessu a ainas rpm"

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "permiti \"su\""

#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "acessu a file de aministradura"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "acessu a ainas po s'arretza"

#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "acessu a ainas po cumpilai"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(jai açuntu %s)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Custa password est tropu simpli"

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Intra unu nòmini umperadori"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Su nòmini umperadori depit tenni feti litras piticas, nùmerus, `-' e `_'"

#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "Nòmini umperadori tropu longu"

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Su nòmini umperadori est jai açuntu"

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID umperadori"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "IP Grupu"

#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr "%s depit essi unu nùmeru"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr "%s iat a bolli prus artu de 500. Du pigu a su pròpiu?"

#: any.pm:631 standalone/draksambashare:1214
#, c-format
msgid "Add user"
msgstr "Açungi umperadori"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Intra unu umperadori\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:5010
#: standalone/drakbackup:2824 standalone/scannerdrake:685
#: standalone/scannerdrake:835
#, c-format
msgid "Done"
msgstr "Fatu"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Aceta umperadori"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Nòmini beru"

#: any.pm:649 standalone/drakbackup:1633
#, c-format
msgid "Login name"
msgstr "Nòmini de intrada"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Shell"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "icona"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Potzu assetiai sa computadora po fai intrai in automàtigu unu umperadori."

#: any.pm:705
#, c-format
msgid "Use this feature"
msgstr "Imprea custa caraterìstiga"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Sçobera s'umperadori predefiniu:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Sçobera su manijadori de fentanas de allui:"

#: any.pm:728
#, c-format
msgid "License agreement"
msgstr "Cuntratu de permissu"

#: any.pm:733
#, c-format
msgid "Release Notes"
msgstr ""

#: any.pm:736 help.pm:14 install_steps_gtk.pm:539
#: install_steps_interactive.pm:715 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Acetu"

#: any.pm:736 install_steps_gtk.pm:539 install_steps_interactive.pm:715
#, c-format
msgid "Refuse"
msgstr "Arrevuda"

#: any.pm:753 any.pm:821
#, c-format
msgid "Please choose a language to use."
msgstr "Sçobera sa lìngua de impreai."

#: any.pm:754 any.pm:822
#, c-format
msgid "Language choice"
msgstr "Sçoberu de sa lìngua"

#: any.pm:782
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux podit suportai prus lìnguas a sa borta. Sçobera\n"
"is lìnguas ki bolis aposentai. Ndi as a podi disponni candu as a\n"
"essi acabau s'aposentadura e torrau a allui su sistema."

#: any.pm:785
#, c-format
msgid "Multi languages"
msgstr "Tanti lìnguas"

#: any.pm:801 any.pm:830 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Imprea Unicode de predefiniu"

#: any.pm:802 help.pm:647
#, c-format
msgid "All languages"
msgstr "Totu is lìnguas"

#: any.pm:876 help.pm:566 help.pm:855 install_steps_interactive.pm:932
#, c-format
msgid "Country / Region"
msgstr "Stadu / Arrejoni"

#: any.pm:878
#, c-format
msgid "Please choose your country."
msgstr "Sçobera su stadu anca bivis."

#: any.pm:880
#, c-format
msgid "Here is the full list of available countries"
msgstr "Innoi dui at sa lista de totu is stadus a disposta"

#: any.pm:881
#, c-format
msgid "Other Countries"
msgstr "Atrus Stadus"

#: any.pm:881 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Adelantau"

#: any.pm:889
#, c-format
msgid "Input method:"
msgstr "Manera de input:"

#: any.pm:892 install_any.pm:422 network/netconnect.pm:317
#: network/netconnect.pm:322 network/netconnect.pm:1237 network/wireless.pm:7
#: printer/printerdrake.pm:117
#, c-format
msgid "None"
msgstr "Nisçuna"

#: any.pm:1009
#, c-format
msgid "No sharing"
msgstr "Nisçunu acomunu"

#: any.pm:1009
#, c-format
msgid "Allow all users"
msgstr "Permiti a totu is umperadoris"

#: any.pm:1013
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Bolis permiti a is umperadoris de acomunai cancu directory?\n"
"Ki du permitis, is umperadoris ant a podi cricai \"Share\" in konqueror e "
"nautilus.\n"
"\n"
"\"Custom\" permitit unu assètiu personalisau.\n"

#: any.pm:1025
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: su sistema de acomunai file de Unix, cun prus pagus suportu in Mac e "
"Windows."

#: any.pm:1028
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: sistema de acomunai file de Windows, Mac OS X e medas sistemas Linux de "
"oi."

#: any.pm:1036
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "Podis esportai cun NFS o SMB. Sçobera cali bolis impreai."

#: any.pm:1061
#, c-format
msgid "Launch userdrake"
msgstr "Lança userdrake"

#: any.pm:1061 printer/printerdrake.pm:4085 printer/printerdrake.pm:4088
#: printer/printerdrake.pm:4089 printer/printerdrake.pm:4090
#: printer/printerdrake.pm:5328 standalone/drakTermServ:321
#: standalone/drakbackup:4228 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Serra"

#: any.pm:1063
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Su cumoni personalisau impreat su grupu \"fileshare\". \n"
"Podis impreai userdrake po açungi umperadoris a su grupu."

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "File locali"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Smart Card"

#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "Windows Domain"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Active Directory cun SFU"

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Active Directory cun Winbind"

#: authentication.pm:66
#, c-format
msgid "Local file:"
msgstr "File locali:"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"Narat a sa computadora a impreai LDAP po parti o po totu is autentigaduras: "
"LDAParregollit unus cantu tipus de scedas in sa cumpangia tua."

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"Ti permitit de fai girai unu grupu de computadoras in su pròpiu domìniu "
"Network Information Service cun sa pròpiu password e su pròpiu file de grupu."

#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "Windows Domain:"

#: authentication.pm:69
#, fuzzy, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"iWinbind permitit a su sistema de agatai scedas e autentigai umperadoris in "
"d-unu domìniu Windows."

#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr "Active Directory cun SFU:"

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr "cun Kerberos e Ldap po si autentigai in Active Directory Server "

#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Active Directory cun Winbind:"

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""
"Winbind permitit a su sistema de autentigai umperadoris in d-unu Windows "
"Active Directory Server."

#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "Autentigadura LDAP"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP Server"

#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "simpli"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "skema de siguresa (SASL/Kerberos)"

#: authentication.pm:121 authentication.pm:159
#, c-format
msgid "Authentication Active Directory"
msgstr "Autentigadura in Active Directory"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domìniu"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:75 share/compssUsers.pl:82
#: standalone/drakTermServ:296
#, c-format
msgid "Server"
msgstr "Server"

#: authentication.pm:125
#, c-format
msgid "LDAP users database"
msgstr "Database de is umperadoris LDAP"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr "Imprea Anonymous BIND"

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "Umperadori LDAP autorisau a sfollyai sa Active Directory"

#: authentication.pm:128
#, c-format
msgid "Password for user"
msgstr "Password po umperadori"

#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "Autentigadura NIS"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "Domìniu NIS"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "Server NIS"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentigadura in Windows Domain"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr "Active Directory Realm "

#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr ""

#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr ""

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"Assètia sa password de s'aministradori (root) e is mètudus de autentigadura "
"in arretza"

#: authentication.pm:182
#, c-format
msgid "Set administrator (root) password"
msgstr "Assètia sa password de s'aministradori (root)"

#: authentication.pm:183 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Mètudu de autentigadura"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "Nisçuna password"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Custa password est tropu curtza (bolit longa a su mancu %d caràteris)"

#: authentication.pm:199 network/netconnect.pm:322 network/netconnect.pm:585
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Autentigadura"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "No fait a impreai broadcast sentza de domìniu NIS"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:767
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Beni beniu a su sçoberadori de sistema obradori!\n"
"\n"
"Sçobera unu sistema obradori de sa lista asuta o\n"
"abeta po s'alluidura predefinia.\n"
"\n"

#: bootloader.pm:909
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO cun lista gràfiga"

#: bootloader.pm:910
#, c-format
msgid "LILO with text menu"
msgstr "LILO cun lista scriturali"

#: bootloader.pm:911
#, c-format
msgid "GRUB with graphical menu"
msgstr "GRUB cun lista gràfiga"

#: bootloader.pm:912
#, c-format
msgid "GRUB with text menu"
msgstr "GRUB cun lista scriturali"

#: bootloader.pm:913
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:990
#, c-format
msgid "not enough room in /boot"
msgstr "no dui at spàtziu abasta in /boot"

#: bootloader.pm:1483
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "No podis aposentai su bootloader in d-una pratzidura %s\n"

#: bootloader.pm:1523
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"S'assètiu de su bootloader bolit ajorronau ca sa pratzidura d'ant torrada a "
"numerai"

#: bootloader.pm:1536
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr "No fait a aposentai beni su bootloader. Depis allui e sçoberai \"%s\""

#: bootloader.pm:1537
#, c-format
msgid "Re-install Boot Loader"
msgstr "Torra a aposentai su Boot Loader"

#: common.pm:134
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:134
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:134
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:142
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:150
#, c-format
msgid "%d minutes"
msgstr "%d minudus"

#: common.pm:152
#, c-format
msgid "1 minute"
msgstr "1 minudu"

#: common.pm:154
#, c-format
msgid "%d seconds"
msgstr "%d segundus"

#: common.pm:260
#, c-format
msgid "kdesu missing"
msgstr "kdesu amancat"

#: common.pm:263
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Àustria"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Austràlia"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Belju"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brasili"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Cànada"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Svìtzera"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Arrepùbriga Ceca"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Germània"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Danimarca"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estònia"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Spannya"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Finlàndia"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "França"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grexa"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Ungheria"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irlanda"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Israeli"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Itàlia"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Japoni"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Olanda"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Norvexa"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Zelanda Noa"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Polònia"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugallu"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Rùssia"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Svètzia"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Slovàkia"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Tailàndia"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Taiwan"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Sud Àfriga"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Stadus Unius"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV est unu protocollu ki ti permitit de una directory de unu server web\n"
"in locali, e a da manijai ke unu filesystem locali (postu ki su server web "
"siat\n"
"assetiau ke WebDAV server). Ki bolis açungi puntus de càrrigu WebDAV,\n"
"sçobera \"Nou\"."

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Nou"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:456 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Scàrriga"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:453 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Càrriga"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:447
#: diskdrake/interactive.pm:679 diskdrake/interactive.pm:698
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Puntu de càrrigu"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Intra sa URL de su server WebDAV"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "Sa URL depit cumentzai cun http:// o https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server: "

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:523
#: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1296
#, c-format
msgid "Mount point: "
msgstr "Puntu de càrrigu: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1303
#, c-format
msgid "Options: %s"
msgstr "Sceras: %s"

#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:293
#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:63
#: install_interactive.pm:217 install_interactive.pm:223
#: install_interactive.pm:276 install_interactive.pm:281
#: install_steps_interactive.pm:253 install_steps_interactive.pm:317
#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Pratzimentu"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Fai una còpia de is dadus tuus po primu cosa"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ki pensas de impreai aboot, atentu a lassai spàtziu lìberu (abastant 2048 "
"segaduras)\n"
"a su cumentzu de su discu"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Wizard"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Sçobera atzioni"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Tenis una pratzidura manna Microsoft Windows.\n"
"Ti cunsillu de arremesurai custa pratzidura\n"
"(cricanci apitzus, aputzis crica \"Arremesura\")"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Crica in d-una pratzidura"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3076 standalone/drakbackup:3136
#, c-format
msgid "Details"
msgstr "A minudu"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Nisçunu discu agatau"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1233
#, c-format
msgid "Empty"
msgstr "Sbuidu"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Tipus de filesystem:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Imprea ``%s'' intamis"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:472
#, c-format
msgid "Create"
msgstr "Crea"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:448 diskdrake/interactive.pm:625
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Tipu"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:457
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Burra"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Imprea ``Scàrriga'' po primu cosa"

#: diskdrake/interactive.pm:195
#, c-format
msgid "Choose another partition"
msgstr "Sçobera un'atra pratzidura"

#: diskdrake/interactive.pm:195
#, c-format
msgid "Choose a partition"
msgstr "Sçobera una pratzidura"

#: diskdrake/interactive.pm:224
#, c-format
msgid "Exit"
msgstr "Bessi"

#: diskdrake/interactive.pm:257 help.pm:530
#, c-format
msgid "Undo"
msgstr "No fatzas"

#: diskdrake/interactive.pm:257
#, c-format
msgid "Toggle to normal mode"
msgstr "Modalidadi normali"

#: diskdrake/interactive.pm:257
#, c-format
msgid "Toggle to expert mode"
msgstr "Modalidadi sperta"

#: diskdrake/interactive.pm:276
#, c-format
msgid "Continue anyway?"
msgstr "Sigu comuncas?"

#: diskdrake/interactive.pm:281
#, c-format
msgid "Quit without saving"
msgstr "Bessi sentza de sarvai"

#: diskdrake/interactive.pm:281
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Bessu sentza de scriri sa tàula de is pratziduras?"

#: diskdrake/interactive.pm:286
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Bolis sarvai is mudas de /etc/fstab"

#: diskdrake/interactive.pm:293 install_steps_interactive.pm:317
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Depis torrai a allui po fai balli is mudas a sa tàula de is pratziduras"

#: diskdrake/interactive.pm:298
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Iast a depi formatai sa pratzidura %s.\n"
"De ki no no fait a scriri nudda in fstab po su puntu de càrrigu%s.\n"
"Bessu comuncas?"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Lìmpia totu"

#: diskdrake/interactive.pm:312 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Pratziduramentu automàtigu"

#: diskdrake/interactive.pm:313 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:98
#, c-format
msgid "More"
msgstr "Atru"

#: diskdrake/interactive.pm:318
#, c-format
msgid "Hard drive information"
msgstr "Scedas discu tostau"

#: diskdrake/interactive.pm:350
#, c-format
msgid "All primary partitions are used"
msgstr "Totu is pratziduras primarjas funt impreadas"

#: diskdrake/interactive.pm:351
#, c-format
msgid "I can not add any more partitions"
msgstr "No potzu açungi atras pratziduras"

#: diskdrake/interactive.pm:352
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Po tenni prus pratziduras, burrandi una po podi creai una pratzidura tirada"

#: diskdrake/interactive.pm:361
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount"
msgstr "Supermount"

#: diskdrake/interactive.pm:363
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "Supermount ma no po is trastus CDROM"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Sarva sa tàula de is pratziduras"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Arrecasça sa tàula de is pratziduras"

#: diskdrake/interactive.pm:371 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Arranja sa tàula de is pratziduras"

#: diskdrake/interactive.pm:373 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Torra a carrigai sa tàula de is pratziduras"

#: diskdrake/interactive.pm:375
#, c-format
msgid "Removable media automounting"
msgstr "Càrrigu automàtigu mèdius arremoviditzus"

#: diskdrake/interactive.pm:388 diskdrake/interactive.pm:414
#, c-format
msgid "Select file"
msgstr "Sçobera file"

#: diskdrake/interactive.pm:400
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Sa còpia de sa tàula de pratzidura no est manna uguali\n"
"Sigu a andai?"

#: diskdrake/interactive.pm:429
#, c-format
msgid "Trying to rescue partition table"
msgstr "Provu a sarvai sa tàula de pratzidura"

#: diskdrake/interactive.pm:435
#, c-format
msgid "Detailed information"
msgstr "Scedas a minudu"

#: diskdrake/interactive.pm:451 diskdrake/interactive.pm:769
#, c-format
msgid "Resize"
msgstr "Arremesura"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Format"
msgstr "Formata"

#: diskdrake/interactive.pm:454
#, c-format
msgid "Add to RAID"
msgstr "Açungi a RAID"

#: diskdrake/interactive.pm:455
#, c-format
msgid "Add to LVM"
msgstr "Açungi a LVM"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Remove from RAID"
msgstr "Burra de RAID"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Remove from LVM"
msgstr "Burra de LVM"

#: diskdrake/interactive.pm:460
#, c-format
msgid "Modify RAID"
msgstr "Muda RAID"

#: diskdrake/interactive.pm:461
#, c-format
msgid "Use for loopback"
msgstr "Imprea po loopback"

#: diskdrake/interactive.pm:516
#, c-format
msgid "Create a new partition"
msgstr "Crea una pratzidura noa"

#: diskdrake/interactive.pm:519
#, c-format
msgid "Start sector: "
msgstr "Segadura de partèntzia: "

#: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938
#, c-format
msgid "Size in MB: "
msgstr "Manniori in MB: "

#: diskdrake/interactive.pm:522 diskdrake/interactive.pm:939
#, c-format
msgid "Filesystem type: "
msgstr "Tipu de filesystem: "

#: diskdrake/interactive.pm:527
#, c-format
msgid "Preference: "
msgstr "Preferèntzia: "

#: diskdrake/interactive.pm:530
#, c-format
msgid "Logical volume name "
msgstr ""

#: diskdrake/interactive.pm:560
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"No podis creai una pratzidura noa\n"
"(ses lòmpiu a su nùmeru permìtiu de pratziduras primarjas).\n"
"Innantis burra una pratzidura primarja e creandi una tirada."

#: diskdrake/interactive.pm:590
#, c-format
msgid "Remove the loopback file?"
msgstr "Burru su file de loopback?"

#: diskdrake/interactive.pm:609
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Apustis de sa muda de tipu de sa pratzidura %s, totu su ki dui at du perdis"

#: diskdrake/interactive.pm:621
#, c-format
msgid "Change partition type"
msgstr "Muda tipu de pratzidura"

#: diskdrake/interactive.pm:622 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Ita filesystem bolis?"

#: diskdrake/interactive.pm:630
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Mudai de ext2 a ext3"

#: diskdrake/interactive.pm:650
#, c-format
msgid "Which volume label?"
msgstr ""

#: diskdrake/interactive.pm:666
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Aundi bolis carrigai su file de loopback %s?"

#: diskdrake/interactive.pm:667
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Aundi bolis carrigai su trastu %s?"

#: diskdrake/interactive.pm:672
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"No fait a disassetiai su puntu de càrrigu ca sa pratzidura est po loopback.\n"
"Boga su loopback innantis"

#: diskdrake/interactive.pm:697
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Aundi bolis carrigai %s?"

#: diskdrake/interactive.pm:721 diskdrake/interactive.pm:800
#: install_interactive.pm:157 install_interactive.pm:189
#, c-format
msgid "Resizing"
msgstr "Arremesuru"

#: diskdrake/interactive.pm:721
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Càrculu is làcanas de su filesystem FAT"

#: diskdrake/interactive.pm:757
#, c-format
msgid "This partition is not resizeable"
msgstr "No fait a arremesurai custa pratzidura"

#: diskdrake/interactive.pm:762
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Totu su ki dui est in custa pratzidura iat a bolli sarvau in còpia"

#: diskdrake/interactive.pm:764
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Apustis de s'arremesuru de sa pratzidura %s, totu su ki dui at du perdis"

#: diskdrake/interactive.pm:769
#, c-format
msgid "Choose the new size"
msgstr "Sçobera sa mesura noa"

#: diskdrake/interactive.pm:770
#, c-format
msgid "New size in MB: "
msgstr "Mesura noa in MB: "

#: diskdrake/interactive.pm:811 install_interactive.pm:197
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Microsoft Windows®"
msgstr ""

#: diskdrake/interactive.pm:852
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Sçobera unu RAID ki jai dui est po d'açungi"

#: diskdrake/interactive.pm:854 diskdrake/interactive.pm:871
#, c-format
msgid "new"
msgstr "nou"

#: diskdrake/interactive.pm:869
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Sçobera unu LVM ki jai dui est po d'açungi"

#: diskdrake/interactive.pm:875
#, c-format
msgid "LVM name?"
msgstr "Nòmini LVM?"

#: diskdrake/interactive.pm:903
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:905
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:923
#, c-format
msgid "This partition can not be used for loopback"
msgstr "No fait a impreai custa pratzidura po loopback"

#: diskdrake/interactive.pm:936
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:937
#, c-format
msgid "Loopback file name: "
msgstr "Nòmini de su file de loopback:"

#: diskdrake/interactive.pm:942
#, c-format
msgid "Give a file name"
msgstr "Dona unu nòmini de file"

#: diskdrake/interactive.pm:945
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Un'atru loopback est jai impreendi su file, sçoberandi un'atru"

#: diskdrake/interactive.pm:946
#, c-format
msgid "File already exists. Use it?"
msgstr "Su file esistit jai. A d'impreai?"

#: diskdrake/interactive.pm:969
#, c-format
msgid "Mount options"
msgstr "Sceras de càrrigu"

#: diskdrake/interactive.pm:976
#, c-format
msgid "Various"
msgstr ""

#: diskdrake/interactive.pm:1044
#, c-format
msgid "device"
msgstr "trastu"

#: diskdrake/interactive.pm:1045
#, c-format
msgid "level"
msgstr "arrasu"

#: diskdrake/interactive.pm:1046
#, c-format
msgid "chunk size in KiB"
msgstr ""

#: diskdrake/interactive.pm:1063
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Atentu: custa cosa est perigulosa."

#: diskdrake/interactive.pm:1078
#, c-format
msgid "What type of partitioning?"
msgstr "Ita tipu de pratzimentu?"

#: diskdrake/interactive.pm:1116
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Depis torrai a allui innantis ki sa muda tenjat efetu"

#: diskdrake/interactive.pm:1125
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Megu a scrìiri sa tàula de pratzidura de su trastu %s in su discu!"

#: diskdrake/interactive.pm:1148
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Apustis formatada sa pratzidura %s, as a perdi totu su ki dui est"

#: diskdrake/interactive.pm:1164
#, c-format
msgid "Move files to the new partition"
msgstr "Movi is file a sa pratzidura noa"

#: diskdrake/interactive.pm:1164 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr "Cua is file"

#: diskdrake/interactive.pm:1165
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: diskdrake/interactive.pm:1176
#, c-format
msgid "Moving files to the new partition"
msgstr "Movu is file a sa pratzidura noa"

#: diskdrake/interactive.pm:1180
#, c-format
msgid "Copying %s"
msgstr "Còpiu %s"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "Removing %s"
msgstr "Burru %s"

#: diskdrake/interactive.pm:1198
#, c-format
msgid "partition %s is now known as %s"
msgstr "sa pratzidura %s imoi da connosceus po %s"

#: diskdrake/interactive.pm:1199
#, c-format
msgid "Partitions have been renumbered: "
msgstr "Is nùmerus de is pratziduras funt mudaus:"

#: diskdrake/interactive.pm:1219 diskdrake/interactive.pm:1281
#, c-format
msgid "Device: "
msgstr "Trastu: "

#: diskdrake/interactive.pm:1220
#, c-format
msgid "Devfs name: "
msgstr "Nòmini devfs: "

#: diskdrake/interactive.pm:1221
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1222
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ""

#: diskdrake/interactive.pm:1226 diskdrake/interactive.pm:1235
#: diskdrake/interactive.pm:1299
#, c-format
msgid "Type: "
msgstr "Tipu: "

#: diskdrake/interactive.pm:1230 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Nòmini: "

#: diskdrake/interactive.pm:1237
#, c-format
msgid "Start: sector %s\n"
msgstr "Cumentzu: segadura %s\n"

#: diskdrake/interactive.pm:1238
#, c-format
msgid "Size: %s"
msgstr "Mesura: %s"

#: diskdrake/interactive.pm:1240
#, c-format
msgid ", %s sectors"
msgstr ", %s segaduras"

#: diskdrake/interactive.pm:1242
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindru %d finas a %d\n"

#: diskdrake/interactive.pm:1243
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1244
#, c-format
msgid "Formatted\n"
msgstr "Formatau\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Not formatted\n"
msgstr "No formatau\n"

#: diskdrake/interactive.pm:1246
#, c-format
msgid "Mounted\n"
msgstr "Carrigau\n"

#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"File (s) de loopback:\n"
"   %s\n"

#: diskdrake/interactive.pm:1253
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Pratzidura alluta de predefiniu\n"
"    (po allui MS-DOS, no po lilo)\n"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "Level %s\n"
msgstr "Arrasu %s\n"

#: diskdrake/interactive.pm:1256
#, c-format
msgid "Chunk size %d KiB\n"
msgstr ""

#: diskdrake/interactive.pm:1257
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discus RAID %s\n"

#: diskdrake/interactive.pm:1259
#, c-format
msgid "Loopback file name: %s"
msgstr "Nòmini de su file de loopback: %s"

#: diskdrake/interactive.pm:1262
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""

#: diskdrake/interactive.pm:1265
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Custa pratzidura spetziali\n"
"Bootstrap est po\n"
"allui su sistema in dual-boot.\n"

#: diskdrake/interactive.pm:1282
#, c-format
msgid "Read-only"
msgstr "Ligi-feti"

#: diskdrake/interactive.pm:1283
#, c-format
msgid "Size: %s\n"
msgstr "Mesura: %s\n"

#: diskdrake/interactive.pm:1284
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Jometria: %s cilindrus, %s concas, %s segaduras\n"

#: diskdrake/interactive.pm:1285 network/thirdparty.pm:331
#, c-format
msgid "Info: "
msgstr "Sceda: "

#: diskdrake/interactive.pm:1286
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discus LVM %s\n"

#: diskdrake/interactive.pm:1287
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tipu de tàula de is pratziduras: %s\n"

#: diskdrake/interactive.pm:1288
#, c-format
msgid "on channel %d id %d\n"
msgstr ""

#: diskdrake/interactive.pm:1331
#, c-format
msgid "Filesystem encryption key"
msgstr "Crai de cuadura de su filesystem"

#: diskdrake/interactive.pm:1332
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Sçobera sa crai de cuadura de su filesystem"

#: diskdrake/interactive.pm:1335
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Sa crai de cuadura est tropu simpli (bolit longa a su mancu %d caràteris)"

#: diskdrake/interactive.pm:1336
#, c-format
msgid "The encryption keys do not match"
msgstr "Is crais de cuadura no cunsonant"

#: diskdrake/interactive.pm:1339 network/netconnect.pm:1073
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "Crai de cuadura"

#: diskdrake/interactive.pm:1340
#, c-format
msgid "Encryption key (again)"
msgstr "Crai de cuadura (torra)"

#: diskdrake/interactive.pm:1342 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Algoritmu de critadura"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Muda tipu"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Unu atru"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3625
#, c-format
msgid "Username"
msgstr "Nòmini umperadori"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Circa is server"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Circa server nous"

#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Bolit aposentau su pakitu %s. Du bolis aposentai?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3948
#, c-format
msgid "Could not install the %s package!"
msgstr ""

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Amancat su pakitu %s, necessàriu"

#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1288
#: keyboard.pm:381 network/ndiswrapper.pm:95 network/netconnect.pm:471
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2495
#: printer/printerdrake.pm:2632 printer/printerdrake.pm:2953
#: printer/printerdrake.pm:2960 printer/printerdrake.pm:3947
#: printer/printerdrake.pm:4211 printer/printerdrake.pm:4330
#: printer/printerdrake.pm:5487 standalone/drakTermServ:354
#: standalone/drakTermServ:1267 standalone/drakTermServ:1328
#: standalone/drakTermServ:2006 standalone/drakbackup:509
#: standalone/drakbackup:608 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:957
#, c-format
msgid "Warning"
msgstr "Atentu"

#: do_pkgs.pm:35 standalone/harddrake2:527
#, c-format
msgid "The following packages need to be installed:\n"
msgstr ""

#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "Aposentu is pakitus..."

#: do_pkgs.pm:252
#, c-format
msgid "Removing packages..."
msgstr "Srèxinu is pakitus..."

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "Formatu sa pratzidura %s"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "Creu e formatu su file %s"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "No sciu comenti formatai %s in tipu %s"

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr ""

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr ""

#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr "Càrrigu sa pratzidura %s"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "càrrigu de sa pratzidura %s in sa directory %s faddia"

#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr "Controllu %s"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "faddina de scàrrigu %s: %s"

#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr "Abivu pratzidura swap %s"

#: fs/mount_options.pm:113
#, c-format
msgid "Use an encrypted file system"
msgstr "Impreai unu filesystem cuau"

#: fs/mount_options.pm:115
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:117
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:123
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:129
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:133
#, c-format
msgid "Mount the file system read-only."
msgstr "Càrriga su filesystem ligi-feti."

#: fs/mount_options.pm:135
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "Totu su I/O po su filesystem iat a bolli fatu in sincronia."

#: fs/mount_options.pm:139
#, c-format
msgid "Allow an ordinary user to mount the file system."
msgstr ""

#: fs/mount_options.pm:141
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Support user. extended attributes"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr "Dona permissu de scriidura a umperadoris normalis"

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Dona a is umperadoris normalis acessu a ligi-feti"

#: fs/type.pm:363
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "No fait a impreai JFS po pratziduras prus piticas de 16MB"

#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "No fait a impreai ReiserFS po pratziduras prus piticas de 32MB"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "cun /usr"

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "server"

#: fsedit.pm:218
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""

#: fsedit.pm:391
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Is puntus de càrrigu depint cumetzai cun d-una /"

#: fsedit.pm:392
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Is puntus de càrrigu iant a bolli de litras e nùmerus feti"

#: fsedit.pm:393
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Dui at jai una pratzidura cun puntu de càrrigu in %s\n"

#: fsedit.pm:397
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""

#: fsedit.pm:403
#, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""

#: fsedit.pm:405
#, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""

#: fsedit.pm:409 fsedit.pm:411
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Custa directory iat a bolli lassada in su filesystem root"

#: fsedit.pm:413 fsedit.pm:415
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Ti serbit unu filesystem beru (ext2/ext3, reiserfs, xfs, or jfs) po custu "
"puntu de càrrigu\n"

#: fsedit.pm:417
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "No fait a impreai unu filesystem cuau po su puntu de càrrigu %s"

#: fsedit.pm:481
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "No dui at spàtziu abasta po sa aposentadura automàtiga"

#: fsedit.pm:483
#, c-format
msgid "Nothing to do"
msgstr "Nudda de fai"

#: harddrake/data.pm:62 install_any.pm:1710
#, c-format
msgid "Floppy"
msgstr "Floppy"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:88 install_any.pm:1711
#, c-format
msgid "Hard Disk"
msgstr "Hard Disk"

#: harddrake/data.pm:97 install_any.pm:1712
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "Scriidoris CD/DVD"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:127 standalone/drakbackup:2054
#, c-format
msgid "Tape"
msgstr "Tape"

#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Skeda Vìdeo"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr "Skeda DVB"

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "Skeda TV"

#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Atrus trastus multimedia"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Skeda de sonu"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Webcam"

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Processoris"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "Adatadoris ISDN"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr "Trastus USB po su sonu"

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr "Skedas arràdiu"

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr "Skedas de arretza ATM"

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr "Skedas de arretza WAN"

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr "Trastus Bluetooth"

#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Skeda Ethernet"

#: harddrake/data.pm:282 network/netconnect.pm:492
#, c-format
msgid "Modem"
msgstr "Modem"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "Adatadoris ADSL"

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Memòria"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "Controlladoris AGP"

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:964
#, c-format
msgid "Printer"
msgstr "Imprentadora"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr "Controlladoris de sa Porta de Jogu"

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Joystick"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "Controlladoris SATA"

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "Controlladoris RAID"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Controlladoris (E)IDE/ATA"

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Controlladoris Firewire"

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "Controlladoris PCMCIA"

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "Controlladoris SCSI"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "Controlladoris USB"

#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "Portas USB"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "Controlladoris SMBus"

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "Pontis e controlladoris de sistema"

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:94
#: install_steps_interactive.pm:924 standalone/finish-install:41
#: standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Tecrau"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr "Tablet e touchscreen"

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:957
#, c-format
msgid "Mouse"
msgstr "Sòrixi"

#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "Scannidora"

#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr "Disconnotu/Atrus"

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Abeta... Àprigu s'assètiu"

#: harddrake/sound.pm:229
#, c-format
msgid "No alternative driver"
msgstr ""

#: harddrake/sound.pm:230
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:236
#, c-format
msgid "Sound configuration"
msgstr "Assètiu de su Sonu"

#: harddrake/sound.pm:238
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:243
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:245
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:144
#, c-format
msgid "Driver:"
msgstr "Driver:"

#: harddrake/sound.pm:267
#, c-format
msgid "Trouble shooting"
msgstr ""

#: harddrake/sound.pm:275
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:283
#, c-format
msgid "No open source driver"
msgstr "Nisçunu driver open source"

#: harddrake/sound.pm:284
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"No dui est unu driver lìberu po sa skeda àudio (%s), ma nci nd'at unu "
"propiedàriu in \"%s\"."

#: harddrake/sound.pm:287
#, c-format
msgid "No known driver"
msgstr "Nisçunu driver connotu"

#: harddrake/sound.pm:288
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "No connosçu driver po sa skeda àudio (%s)"

#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:837
#, c-format
msgid "Unknown driver"
msgstr "Driver disconnotu"

#: harddrake/sound.pm:293
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""

#: harddrake/sound.pm:307
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:310
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:336
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: harddrake/sound.pm:339
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:342
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr ""

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Disconnotu|Genèrigu"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Disconnotu|CPH05X (bt878) [meda produsidoris]"

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Disconnotu[CPH06X (bt878) [meda produsidoris]"

#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Po su prus de is skedas TV de oi, su mòdulu bttv de su kernel GNU/Linux "
"connoscit a solu is paràmetrus justus.\n"
"Ki no connoscit beni sa skeda, podis fortzai innoi is tipus de tuner e "
"skeda. Ki serbit, sçobera is paràmetrus de sa skeda tv."

#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "Modellu de sa skeda:"

#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr "Tipu de sintonisadori:"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr "Assètius PLL:"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "Suportu arràdiu:"

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "abiva su suportu arràdiu"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Nòmini umperadori"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: help.pm:51 help.pm:431 help.pm:681 install_interactive.pm:176
#: install_steps_gtk.pm:237 install_steps_gtk.pm:682 interactive.pm:436
#: interactive/newt.pm:321 network/thirdparty.pm:385
#: printer/printerdrake.pm:3884 standalone/drakTermServ:412
#: standalone/drakbackup:4085 standalone/drakbackup:4179
#: standalone/drakbackup:4196 standalone/drakbackup:4214 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Sighi"

#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Bolis a tenni custa possibilidadi?"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Workstation"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Adelantamentu"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Ambienti Gràfigu"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:623
#, c-format
msgid "Individual package selection"
msgstr "Sçoberu pakitus unu a unu"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Ajorronu"

#: help.pm:146 install_steps_interactive.pm:581
#, c-format
msgid "With X"
msgstr "Cun X"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Cun documentadura fundamentali"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Aposentadura minimali diaderus"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2624
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "No"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2624
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Eya"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "Dependèntzias automàtigas"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2448 standalone/drakbackup:2452
#: standalone/drakbackup:2456 standalone/drakbackup:2460
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Assètia"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:859
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Arreloju de sistema assetiau a GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Sincronisadura automàtiga"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:374 install_interactive.pm:96
#, c-format
msgid "Use free space"
msgstr "Imprea spàtziu lìberu"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Imprea pratzidura de imoi"

#: help.pm:374 install_interactive.pm:138
#, c-format
msgid "Use the free space on the Microsoft Windows® partition"
msgstr "Imprea su spàtziu lìberu in sa pratzidura Windows"

#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr "Burra totu su discu"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Srèxina Windows"

#: help.pm:374 install_interactive.pm:233
#, c-format
msgid "Custom disk partitioning"
msgstr "Pratziduramentu discu personalisau"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Crea floppy de aposentadura automàtiga"

#: help.pm:409 install_steps_interactive.pm:1314
#, c-format
msgid "Replay"
msgstr "Faiddu torra"

#: help.pm:409 install_steps_interactive.pm:1314
#, c-format
msgid "Automated"
msgstr "Automatisau"

#: help.pm:409 install_steps_interactive.pm:1317
#, c-format
msgid "Save packages selection"
msgstr "Sarva su sçoberu de is pakitus"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3882
#: standalone/drakTermServ:391 standalone/drakbackup:4048
#: standalone/drakbackup:4084 standalone/drakbackup:4195
#: standalone/drakbackup:4210 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "Agoa"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:132
#, c-format
msgid "Install"
msgstr "Aposenta"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Aministradori de Siguresa"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Càrrigu automàtigu de mèdius arremoviditzus"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr ""

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Spannyolu"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "cun emuladura de Arroda"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Universali | Dònnia sòrixi PS/2 & USB"

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "autentigadura"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Spertu"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788 help.pm:855 install_steps_interactive.pm:991
#: install_steps_interactive.pm:1008
#, c-format
msgid "Sound card"
msgstr "Skeda de Sonu"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:855
#: install_steps_interactive.pm:950 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Fasci oràriu"

#: help.pm:855 install_steps_interactive.pm:1024
#, c-format
msgid "TV card"
msgstr "Skeda TV"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "Skeda ISDN"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Interfaci Gràfiga"

#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1042
#: standalone/drakbackup:2039
#, c-format
msgid "Network"
msgstr "Arretza"

#: help.pm:855 install_steps_interactive.pm:1054
#, c-format
msgid "Proxies"
msgstr "Proxy"

#: help.pm:855 install_steps_interactive.pm:1065
#, c-format
msgid "Security Level"
msgstr "Arrasu de Siguresa"

#: help.pm:855 install_steps_interactive.pm:1079 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr "Firewall"

#: help.pm:855 install_steps_interactive.pm:1095
#, c-format
msgid "Bootloader"
msgstr "Bootloader"

#: help.pm:855 install_steps_interactive.pm:1108 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "Serbìtzius"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Sighi ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Agoa"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr "Depis formatai %s puru"

#: install_any.pm:406
#, c-format
msgid "Do you have further supplementary media?"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:409
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation medium to configure?"
msgstr ""

#: install_any.pm:422 printer/printerdrake.pm:3211
#: printer/printerdrake.pm:3218 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:422
#, c-format
msgid "Network (HTTP)"
msgstr "Arretza (HTTP)"

#: install_any.pm:422
#, c-format
msgid "Network (FTP)"
msgstr "Arretza (FTP)"

#: install_any.pm:422
#, c-format
msgid "Network (NFS)"
msgstr "Arretza (NFS)"

#: install_any.pm:452
#, c-format
msgid "Insert the CD 1 again"
msgstr "Intra torra su CD 1"

#: install_any.pm:478 network/netconnect.pm:866 standalone/drakbackup:114
#, c-format
msgid "No device found"
msgstr "Nisçunu trastu agatau"

#: install_any.pm:483
#, c-format
msgid "Insert the CD"
msgstr "Intra su CD"

#: install_any.pm:488
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "No potzu carrigai su CD-ROM"

#: install_any.pm:521 install_any.pm:542
#, c-format
msgid "URL of the mirror?"
msgstr "URL de su sprigu?"

#: install_any.pm:526
#, c-format
msgid "NFS setup"
msgstr "Assètiu NFS"

#: install_any.pm:526
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:527
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:527 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "Directory"

#: install_any.pm:580
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr ""

#: install_any.pm:657
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr "Srèxinu is pakitus ki dui funt po ajorronai..."

#: install_any.pm:699
#, c-format
msgid "Looking at packages already installed..."
msgstr "Càstiu is pakitus jai aposentaus..."

#: install_any.pm:703
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Agatu is pakitus po ajorronai..."

#: install_any.pm:781
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Càmbia su Cd-Rom!\n"
"Intra su Cd-Rom etiketau \"%s\" in su ligidori e craca OK candu as fatu."

#: install_any.pm:793
#, c-format
msgid "Copying in progress"
msgstr "Còpia in cursu"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:935
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:958
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: install_any.pm:1394 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "Faddina ligendi su file %s"

#: install_any.pm:1628
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "Apu arrenominau is discus ki sighint:"

#: install_any.pm:1630
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (innantis nominau %s)"

#: install_any.pm:1670
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""

#: install_any.pm:1714
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1714
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1714
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1737
#, c-format
msgid "Please choose a media"
msgstr "Sçobera unu suportu, po praxeri"

#: install_any.pm:1753
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "Su file esistit jai. Nci scriu apitzus?"

#: install_any.pm:1757
#, c-format
msgid "Permission denied"
msgstr "Permissu dennegau"

#: install_any.pm:1806
#, c-format
msgid "Bad NFS name"
msgstr ""

#: install_any.pm:1827
#, c-format
msgid "Bad media %s"
msgstr ""

#: install_any.pm:1877
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "No fait a fai fotografias innantis de pratzidurai"

#: install_any.pm:1884
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "As a podi biri is fotografias apustis de s'aposentada in %s"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Aposentadura de su sistema"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Assètiu de su sistema"

#: install_interactive.pm:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"A cancu parti hardware serbint driver ``proprietàrius''po traballai.\n"
"Podis agatai cancu sceda apitzus a: %s"

#: install_interactive.pm:63
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Depis tenni una pratzidura root.\n"
"Po custu, crea una pratzidura (o crica in d-una ki jai dui est).\n"
"Apustis sçobera s'atzioni ``Puntu de càrrigu'' e assetiaddu a `/'"

#: install_interactive.pm:68
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"No tenis una pratzidura de swap.\n"
"\n"
"Sigu comuncas?"

#: install_interactive.pm:71 install_steps.pm:217
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Depis tenni una pratzidura FAT carrigada in /boot/efi"

#: install_interactive.pm:98
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "No dui at spàtziu abasta po ponni pratziduras noas"

#: install_interactive.pm:106
#, c-format
msgid "Use existing partitions"
msgstr "Imprea is pratziduras ki jai dui funt"

#: install_interactive.pm:108
#, c-format
msgid "There is no existing partition to use"
msgstr "No dui at pratzidura de da podi impreai"

#: install_interactive.pm:115
#, c-format
msgid "Use the Microsoft Windows® partition for loopback"
msgstr "Imprea sa pratzidura Microsoft Windows® po loopback"

#: install_interactive.pm:118
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Cali pratzidura bolis impreai po Linux4Win?"

#: install_interactive.pm:120
#, c-format
msgid "Choose the sizes"
msgstr "Sçobera is mesuras"

#: install_interactive.pm:121
#, c-format
msgid "Root partition size in MB: "
msgstr "Mesura de sa pratzidura root in MB: "

#: install_interactive.pm:122
#, c-format
msgid "Swap partition size in MB: "
msgstr "Mesura de sa pratzidura swap in MB: "

#: install_interactive.pm:131
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"No dui at pratzidura FAT de impreai po loopback (no abarrat spàtziu abasta)"

#: install_interactive.pm:140
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Calli pratzidura bolis arremesurai?"

#: install_interactive.pm:154
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"S'arremesuradori FAT no podit manijai sa pratzidura, \n"
"dui est sa faddina ki sighit: %s"

#: install_interactive.pm:157
#, c-format
msgid "Computing the size of the Microsoft Windows® partition"
msgstr "Càrculu sa mesura de sa pratzidura Microsoft Windows®"

#: install_interactive.pm:164
#, c-format
msgid ""
"Your Microsoft Windows® partition is too fragmented. Please reboot your "
"computer under Microsoft Windows®, run the ``defrag'' utility, then restart "
"the Mandriva Linux installation."
msgstr ""

#: install_interactive.pm:167
#, c-format
msgid ""
"WARNING!\n"
"\n"
"\n"
"Your Microsoft Windows® partition will be now resized.\n"
"\n"
"\n"
"Be careful: this operation is dangerous. If you have not already done so, "
"you first need to exit the installation, run \"chkdsk c:\" from a Command "
"Prompt under Microsoft Windows® (beware, running graphical program \"scandisk"
"\" is not enough, be sure to use \"chkdsk\" in a Command Prompt!), "
"optionally run defrag, then restart the installation. You should also backup "
"your data.\n"
"\n"
"\n"
"When sure, press %s."
msgstr ""

#: install_interactive.pm:179
#, c-format
msgid "Which size do you want to keep for Microsoft Windows® on"
msgstr "Ita mesura bolis apoderai po sa pratzidura Microsoft Windows®"

#: install_interactive.pm:180
#, c-format
msgid "partition %s"
msgstr "pratzidura %s"

#: install_interactive.pm:189
#, c-format
msgid "Resizing Microsoft Windows® partition"
msgstr "Arremesuru sa pratzidura Microsoft Windows®"

#: install_interactive.pm:194
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Arremesuradura FAT faddia: %s"

#: install_interactive.pm:209
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "No dui at pratzidura FAT de arremesurai (no abarrat spàtziu abasta)"

#: install_interactive.pm:214
#, c-format
msgid "Remove Microsoft Windows®"
msgstr "Srèxina Microsoft Windows®"

#: install_interactive.pm:214
#, fuzzy, c-format
msgid "Erase and use entire disk"
msgstr "Burra totu su discu"

#: install_interactive.pm:216
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Tenis prus de unu discu tostau, cali est ki nci bolis aposentai linux?"

#: install_interactive.pm:222
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""

#: install_interactive.pm:237
#, c-format
msgid "Use fdisk"
msgstr "Imprea fdisk"

#: install_interactive.pm:240
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""

#: install_interactive.pm:276
#, c-format
msgid "I can not find any room for installing"
msgstr "No potzu agatai spàtziu po s'aposentadura"

#: install_interactive.pm:280
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
"Su wizard de pratziduramentu DrakX at agatau is solutzionis ki sighint:"

#: install_interactive.pm:288
#, c-format
msgid "Partitioning failed: %s"
msgstr "Pratziduramentu faddiu: %s"

#: install_interactive.pm:295
#, c-format
msgid "Bringing up the network"
msgstr "Alluu s'arretza"

#: install_interactive.pm:300
#, c-format
msgid "Bringing down the network"
msgstr "Studu s'arretza"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press Enter to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"Cumprimentus, s'aposentadura est acabada.\n"
"Boga su mèdiu de alluidura e craca return po torrai a allui.\n"
"\n"
"\n"
"Po sciri de ajorronus disponiditzus po custa versioni de Mandriva Linux,\n"
"ligi is Errata a disposta de:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Imparus po assetiai su sistema funt a disposta in su cabìtulu\n"
"post install de sa Official Mandriva Linux User's Guide."

#: install_steps.pm:252
#, c-format
msgid "Duplicate mount point %s"
msgstr "Dòpia su puntu de càrrigu %s"

#: install_steps.pm:484
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""

#: install_steps_auto_install.pm:68 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr ""

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""

#: install_steps_gtk.pm:211 install_steps_interactive.pm:605
#, c-format
msgid "Package Group Selection"
msgstr ""

#: install_steps_gtk.pm:254 install_steps_interactive.pm:548
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Mesura totali: %d / %d MB"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "Pakitu malu"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "Versioni: "

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "Mesura: "

#: install_steps_gtk.pm:302
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:303
#, c-format
msgid "Importance: "
msgstr "Importu: "

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "No podis scerai/disiscerai custu pakitu"

#: install_steps_gtk.pm:340 network/thirdparty.pm:331
#, c-format
msgid "due to missing %s"
msgstr "ca amancat %s"

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr "ca no est satisfatu %s"

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr "provu a sçoberai %s"

#: install_steps_gtk.pm:343
#, c-format
msgid "in order to keep %s"
msgstr "po podi apoderai %s"

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"No podis sçoberai custu pakitu, ca no dui at spàtziu abasta po d'aposentai"

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "Megu a aposentai is pakitus ki sighint"

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "Megu a srexinai is pakitus ki sighint"

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Custu est unu palitu necessàriu, no fait a du disiscerai"

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "No fait a disiscerai custu pakitu. Est jai aposentau"

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Fait a ajorronai custu pakitu.\n"
"Siguru ses ca du bolis disiscerai?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "No fait a disiscerai custu pakitu. Bolit ajorronau"

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr "Amosta in automàtigu is pakitus sçoberaus"

#: install_steps_gtk.pm:394
#, c-format
msgid "Load/Save selection"
msgstr "Càrriga/Sarva su sçoberu"

#: install_steps_gtk.pm:395
#, c-format
msgid "Updating package selection"
msgstr "Ajorronu su sçoberu de is pakitus"

#: install_steps_gtk.pm:400
#, c-format
msgid "Minimal install"
msgstr "Aposentadura minimali"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:467
#, c-format
msgid "Choose the packages you want to install"
msgstr "Sçobera is pakitus ki bolis aposentai"

#: install_steps_gtk.pm:431 install_steps_interactive.pm:691
#, c-format
msgid "Installing"
msgstr "Seu aposentendi"

#: install_steps_gtk.pm:457
#, c-format
msgid "No details"
msgstr ""

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "Tempus ki abarrat "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "Seu carculendi"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d pakitus"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:719
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Càmbia su Cd-Rom!\n"
"Intra su Cd-Rom etiketau \"%s\" in su ligidori e craca Ok candu as fatu.\n"
"Ki no du tenis, craca Annudda po scampai s'aposentadura de custu Cd-Rom."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:730
#, c-format
msgid "There was an error ordering packages:"
msgstr "Faddina in s'ordinadura de is pakitus:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:734
#, c-format
msgid "There was an error installing packages:"
msgstr "Faddina in s'aposentadura de is pakitus:"

#: install_steps_gtk.pm:560 install_steps_interactive.pm:730
#: install_steps_interactive.pm:734
#, c-format
msgid "Go on anyway?"
msgstr "Sigu comuncas?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:910 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Arresùmini"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:906
#: install_steps_interactive.pm:1055
#, c-format
msgid "not configured"
msgstr "no assetiau"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr "Còpia totu is CD"

#: install_steps_interactive.pm:95
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Sçobera su skema de su tecrau."

#: install_steps_interactive.pm:97
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "Innoi sa lista de totu is tecraus a disposta"

#: install_steps_interactive.pm:127
#, c-format
msgid "Install/Upgrade"
msgstr "Aposenta/Ajorrona"

#: install_steps_interactive.pm:128
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Est una aposentadura o una ajorronadura?"

#: install_steps_interactive.pm:134
#, c-format
msgid "Upgrade %s"
msgstr "Ajorrona %s"

#: install_steps_interactive.pm:147
#, c-format
msgid "Encryption key for %s"
msgstr "Crai de cuadura po %s"

#: install_steps_interactive.pm:170
#, c-format
msgid "Please choose your type of mouse."
msgstr "Sçobera su tipu de sòrixi."

#: install_steps_interactive.pm:171
#, c-format
msgid "Mouse choice"
msgstr "Sçoberu de su sòrixi"

#: install_steps_interactive.pm:180 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Porta de su sòrixi"

#: install_steps_interactive.pm:181 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Sçobera sa porta seriali ki dui est su sòrixi acapiau."

#: install_steps_interactive.pm:191
#, c-format
msgid "Buttons emulation"
msgstr "Emuladura de is butonis"

#: install_steps_interactive.pm:193
#, c-format
msgid "Button 2 Emulation"
msgstr "Emuladura de su Butoni 2"

#: install_steps_interactive.pm:194
#, c-format
msgid "Button 3 Emulation"
msgstr "Emuladura de su Butoni 3"

#: install_steps_interactive.pm:215
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:215
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Assètiu is skedas PCMCIA..."

#: install_steps_interactive.pm:222
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:222
#, c-format
msgid "Configuring IDE"
msgstr "Assètiu IDE"

#: install_steps_interactive.pm:242
#, c-format
msgid "No partition available"
msgstr "Nisçuna pratzidura a disposta"

#: install_steps_interactive.pm:245
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Controllu is pratziduras po agatai is puntus de càrrigu"

#: install_steps_interactive.pm:252
#, c-format
msgid "Choose the mount points"
msgstr "Sçobera is puntus de càrrigu"

#: install_steps_interactive.pm:300
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:305
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""

#: install_steps_interactive.pm:341
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Sçobera is pratziduras ki bolis formatai"

#: install_steps_interactive.pm:343
#, c-format
msgid "Check bad blocks?"
msgstr ""

#: install_steps_interactive.pm:371
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:374
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""

#: install_steps_interactive.pm:383
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""

#: install_steps_interactive.pm:384 install_steps_interactive.pm:436
#, c-format
msgid "Looking for available packages..."
msgstr ""

#: install_steps_interactive.pm:405 install_steps_interactive.pm:810
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr ""

#: install_steps_interactive.pm:445
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""

#: install_steps_interactive.pm:479
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""

#: install_steps_interactive.pm:481
#, c-format
msgid "Load"
msgstr "Càrriga"

#: install_steps_interactive.pm:481 standalone/drakbackup:4066
#: standalone/drakbackup:4136 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "Sarva"

#: install_steps_interactive.pm:489
#, c-format
msgid "Bad file"
msgstr "File malu"

#: install_steps_interactive.pm:562
#, c-format
msgid "Selected size is larger than available space"
msgstr ""

#: install_steps_interactive.pm:577
#, c-format
msgid "Type of install"
msgstr "Tipu de aposentadura"

#: install_steps_interactive.pm:578
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: install_steps_interactive.pm:582
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""

#: install_steps_interactive.pm:583
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:622 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Totu"

#: install_steps_interactive.pm:661
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""

#: install_steps_interactive.pm:666
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom etiketau \"%s\""

#: install_steps_interactive.pm:691
#, c-format
msgid "Preparing installation"
msgstr "Apariçu s'aposentadura"

#: install_steps_interactive.pm:699
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Aposentu su pakitu %s\n"
"%d%%"

#: install_steps_interactive.pm:748
#, c-format
msgid "Post-install configuration"
msgstr "Assètiu pusti-aposentadura"

#: install_steps_interactive.pm:755
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:783
#, c-format
msgid "Updates"
msgstr "Ajorronus"

#: install_steps_interactive.pm:784
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""

#: install_steps_interactive.pm:805
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr ""
"Cuntatu su jassu web de Mandriva Linux po tenni sa lista de is sprigus..."

#: install_steps_interactive.pm:824
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Cuntatu su sprigu po tenni sa lista de is pakitus a disposta..."

#: install_steps_interactive.pm:828
#, c-format
msgid "Unable to contact mirror %s"
msgstr "No potzu cuntatai su sprigu %s"

#: install_steps_interactive.pm:828
#, c-format
msgid "Would you like to try again?"
msgstr "Bolis torrai a provai?"

#: install_steps_interactive.pm:855 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "Cali est su fasci oràriu?"

#: install_steps_interactive.pm:860
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Sincronisadura automàtiga de s'ora (cun NTP)"

#: install_steps_interactive.pm:868
#, c-format
msgid "NTP Server"
msgstr "Server NTP"

#: install_steps_interactive.pm:923 install_steps_interactive.pm:931
#: install_steps_interactive.pm:949 install_steps_interactive.pm:956
#: install_steps_interactive.pm:1107 services.pm:133
#: standalone/drakbackup:1584
#, c-format
msgid "System"
msgstr "Sistema"

#: install_steps_interactive.pm:963 install_steps_interactive.pm:990
#: install_steps_interactive.pm:1007 install_steps_interactive.pm:1023
#: install_steps_interactive.pm:1034
#, c-format
msgid "Hardware"
msgstr "Hardware"

#: install_steps_interactive.pm:969 install_steps_interactive.pm:978
#, c-format
msgid "Remote CUPS server"
msgstr "Server CUPS atesu"

#: install_steps_interactive.pm:969
#, c-format
msgid "No printer"
msgstr "Nisçuna imprentadora"

#: install_steps_interactive.pm:1011
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Tenis una skeda de sonu ISA?"

#: install_steps_interactive.pm:1013
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""

#: install_steps_interactive.pm:1015
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: install_steps_interactive.pm:1035
#, c-format
msgid "Graphical interface"
msgstr "Interfaci Gràfiga"

#: install_steps_interactive.pm:1041 install_steps_interactive.pm:1053
#, c-format
msgid "Network & Internet"
msgstr "Arretza & Internet"

#: install_steps_interactive.pm:1055
#, c-format
msgid "configured"
msgstr "assetiau"

#: install_steps_interactive.pm:1064 install_steps_interactive.pm:1078
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "Siguresa"

#: install_steps_interactive.pm:1083
#, c-format
msgid "activated"
msgstr "abivau"

#: install_steps_interactive.pm:1083
#, c-format
msgid "disabled"
msgstr "disabivau"

#: install_steps_interactive.pm:1094
#, c-format
msgid "Boot"
msgstr "Alluidura"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1098 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s in %s"

#: install_steps_interactive.pm:1112 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Serbìtzius: %d abivaus po %d assentaus"

#: install_steps_interactive.pm:1124
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "No as assetiau ancora X. Siguru ses ca bolis custu?"

#: install_steps_interactive.pm:1205
#, c-format
msgid "Preparing bootloader..."
msgstr "Apariçu su bootloader..."

#: install_steps_interactive.pm:1215
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""

#: install_steps_interactive.pm:1221
#, c-format
msgid "Do you want to use aboot?"
msgstr "Bolis impreai aboot?"

#: install_steps_interactive.pm:1224
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""

#: install_steps_interactive.pm:1241
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1270 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Intra unu floppy sbuidu in su trastu %s"

#: install_steps_interactive.pm:1275
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr ""

#: install_steps_interactive.pm:1277
#, c-format
msgid "Creating auto install floppy..."
msgstr ""

#: install_steps_interactive.pm:1289
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""

#: install_steps_interactive.pm:1299 standalone/draksambashare:421
#: standalone/draksambashare:527 standalone/drakups:118 standalone/drakups:157
#: standalone/logdrake:451 standalone/logdrake:457
#, c-format
msgid "Congratulations"
msgstr "Cumprimentus"

#: install_steps_interactive.pm:1307 install_steps_interactive.pm:1308
#, c-format
msgid "Generate auto install floppy"
msgstr "Crea unu floppy de aposentadura automàtiga"

#: install_steps_interactive.pm:1309
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Aposentadura de Mandriva Linux %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:37
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> intr''e elementus  | <Space> sçoberat | <F12> bisura ki "
"sighit "

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "Sçobera unu file"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1525
#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1127 standalone/drakups:299
#: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "Açungi"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1084
#: standalone/draksambashare:1137 standalone/draksambashare:1176
#, c-format
msgid "Modify"
msgstr "Muda"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1085
#: standalone/draksambashare:1145 standalone/draksambashare:1184
#: standalone/drakups:301 standalone/drakups:361 standalone/drakups:381
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "Burra"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "Fundamentali"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "Acaba"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "Fai"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Sçoberu malu, torra a provai\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ita sçoberas? (predefiniu %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Boxis ki depis preni:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Ita sçoberas? (0/1, predefiniu `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Butoni `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Bolis cricai custu butoni?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Ita sçoberas? (predefiniu `%s'%s)"

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr ""

#: keyboard.pm:171 keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr ""

#: keyboard.pm:172 keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr ""

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr ""

#: keyboard.pm:174 keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr ""

#: keyboard.pm:175 keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr ""

#: keyboard.pm:176 keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr ""

#: keyboard.pm:177 keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr ""

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr ""

#: keyboard.pm:179 keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr ""

#: keyboard.pm:180 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr ""

#: keyboard.pm:181 keyboard.pm:310
#, c-format
msgid "UK keyboard"
msgstr "Tecrau UK"

#: keyboard.pm:182 keyboard.pm:313
#, c-format
msgid "US keyboard"
msgstr "Tecrau US"

#: keyboard.pm:184
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr ""

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr ""

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr ""

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr ""

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr ""

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr ""

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr ""

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr ""

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr ""

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr ""

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr ""

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr ""

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr ""

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr ""

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr ""

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr ""

#: keyboard.pm:201
#, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr ""

#: keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr ""

#: keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr ""

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr ""

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr ""

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr ""

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr ""

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr ""

#: keyboard.pm:212
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr ""

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr ""

#: keyboard.pm:214
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr ""

#: keyboard.pm:215
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr ""

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr ""

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr ""

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr ""

#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr ""

#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr ""

#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""

#: keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr ""

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr ""

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr ""

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr ""

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr ""

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr ""

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr ""

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr ""

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr ""

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr ""

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr ""

#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr ""

#: keyboard.pm:246
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr ""

#: keyboard.pm:247
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr ""

#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr ""

#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr ""

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr ""

#: keyboard.pm:253
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr ""

#: keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr ""

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr ""

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr ""

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr ""

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr ""

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr ""

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr ""

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr ""

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr ""

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr ""

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr ""

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr ""

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr ""

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr ""

#: keyboard.pm:276
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr ""

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr ""

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr ""

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr ""

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:285
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr ""

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr ""

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr ""

#: keyboard.pm:289
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr ""

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr ""

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr ""

#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr ""

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr ""

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr ""

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr ""

#: keyboard.pm:298
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr ""

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:303
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr ""

#: keyboard.pm:305
#, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr ""

#: keyboard.pm:306
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr ""

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr ""

#: keyboard.pm:309
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr ""

#: keyboard.pm:312
#, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr ""

#: keyboard.pm:314
#, c-format
msgid "US keyboard (international)"
msgstr "Tecrau US (intrenatzionali)"

#: keyboard.pm:315
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr ""

#: keyboard.pm:317
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr ""

#: keyboard.pm:318
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr ""

#: keyboard.pm:325
#, c-format
msgid "Right Alt key"
msgstr ""

#: keyboard.pm:326
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""

#: keyboard.pm:327
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:328
#, c-format
msgid "CapsLock key"
msgstr ""

#: keyboard.pm:329
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr ""

#: keyboard.pm:330
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: keyboard.pm:331
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:332
#, c-format
msgid "\"Menu\" key"
msgstr ""

#: keyboard.pm:333
#, c-format
msgid "Left \"Windows\" key"
msgstr ""

#: keyboard.pm:334
#, c-format
msgid "Right \"Windows\" key"
msgstr ""

#: keyboard.pm:335
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""

#: keyboard.pm:336
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""

#: keyboard.pm:337
#, c-format
msgid "Left Shift key"
msgstr ""

#: keyboard.pm:338
#, c-format
msgid "Right Shift key"
msgstr ""

#: keyboard.pm:339
#, c-format
msgid "Left Alt key"
msgstr ""

#: keyboard.pm:340
#, c-format
msgid "Left Control key"
msgstr ""

#: keyboard.pm:341
#, c-format
msgid "Right Control key"
msgstr ""

#: keyboard.pm:377
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#: keyboard.pm:382
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "predefiniu:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "Emiraus Aràbius Unius"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "Afganistàn"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antìgua e Barbuda"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "Albania"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "Armènia"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "Antillas Olandesas"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "Angola"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "Antàrtiga"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "Samoa Americana"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "Azerbaijàn"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bòsnia e Erzegòvina"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "Benin"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "Bolìvia"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "Bahamas"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "Bhutan"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "Ìsula Bouvet"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "Bielorùssia"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "Belize"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Ìsulas Cocos (Keeling)"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Congo (Kinshasa)"

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "Repùbrica de Centru Àfriga"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Congo (Brazzaville)"

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "Cote d'Ivoire"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "Ìsulas Cook"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "Cili"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "Càmerun"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "Cina"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "Colòmbia"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "Serbia & Montenegro"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "Cuba"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "Cabu Birdi"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "Ìsula Christmas"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "Cipru"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "Gibuti"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "Dominica"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "Repùbriga Dominigana"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "Algeria"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "Ecuadòr"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "Egitu"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "Sahara"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "Eritrea"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "Etiòpia"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "Figi"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Falkland Islands (Malvinas)"

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "Micronèsia"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "Ìsulas Faeroer"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "Gabòn"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "Arrennu Uniu"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "Georja"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "Guyana Frantzesa"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "Ghana"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "Gibilterra"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "Groenlàndia"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "Gàmbia"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "Ghinea"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Guadeloupe"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "Ghinea Ecuadoriali"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "South Georgia and the South Sandwich Islands"

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinea-Bissau"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "Guyana"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "Hong Kong SAR (Cina)"

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Ìsulas Heard e McDonald"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "Croàtzia"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "Indonèsia"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "Ìndia"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "British Indian Ocean Territory"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "Iràq"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "Iràn"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "Islanda"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "Jamaica"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "Jordània"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "Kènia"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirghìsistan"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "Camboja"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "Comorras"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts and Nevis"

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "Korea (Nord)"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "Korea"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "Kuwait"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "Ìsulas Cayman"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "Kazakhstan"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "Lìbanu"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "Santa Luxia"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "Libèria"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "Lesotho"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "Lituània"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "Lussemburgu"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "Letònia"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "Lìbia"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "Marrocu"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "Monaco"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "Moldova"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "Madagascàr"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "Ìsulas Marshall"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "Macedònia"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "Mali"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "Birmània"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "Mongòlia"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "Ìsulas Nord Mariannas"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "Martinique"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "Mauritània"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "Maurìtziu"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "Maldivas"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "Malawi"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "Mèssigu"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "Malèsia"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "Mosambicu"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "Namìbia"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "Caledònia Noa"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "Niger"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "Ìsula Norfolk"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "Nigèria"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "Nicaràgua"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "Oman"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "Pànama"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "Perù"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "Polinèsia Frantzesa"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "Pàpua Ghinea Noa"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "Filipinas"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "Pakistàn"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre e Miquelon"

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "Puerto Rico"

#: lang.pm:369
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "Paraguay"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "Palau"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "Romania"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "Aràbia Saudia"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "Ìsulas Salomoni"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "Singabura"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr "Sant'Elena"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "Slovènia"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard e Jan Mayen"

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "Senegàl"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "Somàlia"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "Suriname"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tomè e Prìncipe"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "El Salvadòr"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "Sìria"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "Swaziland"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks Caicos"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "Çad"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "Terras Francesas de Mesudì"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "Togo"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "Tagìkistan"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "Timor Est"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistàn"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "Tunisia"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "Turkia"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad Tobago"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "Tanzània"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "Ucraina"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "United States Minor Outlying Islands"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "Uruguay"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "Usbekistàn"

#: lang.pm:419
#, c-format
msgid "Vatican"
msgstr "Vaticanu"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Saint Vincent e Grenadines"

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr "Virgin Islands (British)"

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Virgin Islands (U.S.)"

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "Vietnàm"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis e Futuna"

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "Yemen"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "Zàmbia"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabwe"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "Beni bènniu a %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr ""

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""

#: modules/interactive.pm:19
#, c-format
msgid "This driver has no configuration parameter!"
msgstr ""

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Assètiu mòdulu"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Podis assetiai dònnia paràmentru de su mòdulu innoi."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Agatadas %s interfacis"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr ""

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Tenis interfacis %s?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Càstia sa sceda hardware"

#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "Aposentu driver po controlladori USB"

#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Aposentu driver po controlladori firewire %s"

#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Aposentu driver po controlladori de discu tostau %s"

#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Aposentu driver po controlladori ethernet %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr ""

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(mòdulu %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr ""

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr ""

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr ""

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr ""

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "unu nùmeru"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d nùmerus pratzius a vìrgula"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d arrayas pratzias a vìrgula"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "nùmerus pratzius a vìrgula"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "arrayas pratzias a vìrgula"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standard"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Sòrixi genèrigu PS2 a arroda"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:596 network/netconnect.pm:601
#: network/netconnect.pm:613 network/netconnect.pm:618
#: network/netconnect.pm:634 network/netconnect.pm:636
#, c-format
msgid "Automatic"
msgstr "Automàtigu"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 butoni"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Sòrixi genèrigu a 2 butonis"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Sòrixi genèrigu a 3 butonis cun emuladori de arroda"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Arroda"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "seriali"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Sòrixi genèrigu a 3 butonis"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan cun emuladori de arroda"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr ""

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series cun emuladori de arroda"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (seriali, tipu C7 beçu)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (seriali, tipu C7 beçu) cun emuladori de arroda"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse cun emuladori de arroda"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 butonis"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 butonis"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 butonis cun emuladori de arroda"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Universali"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "Sòrixis PS/2 & USB"

#: mouse.pm:89
#, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Xbox Controller S"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr ""

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Nisçunu sòrixi"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr "Synaptics Touchpad"

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "Prova su sòrixi"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "Po abivai su sòrixi,"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "MOVI S'ARRODA!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "Server Web"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Domain Name Server"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "Server SSH"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "Server FTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Server de curreu"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "Server POP e IMAP"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "Server Telnet"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "Cumoni de file Windows (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "Server CUPS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "BitTorrent"

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr "Controllu a scannidura de is portas"

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:209
#, c-format
msgid "Other ports"
msgstr "Atras portas"

#: network/drakfirewall.pm:253 network/drakfirewall.pm:256
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:385 standalone/net_applet:422
#, c-format
msgid "Interactive Firewall"
msgstr "Interactive Firewall"

#: network/drakfirewall.pm:254
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""

#: network/drakfirewall.pm:259
#, c-format
msgid "Use Interactive Firewall"
msgstr "Imprea Interactive Firewall"

#: network/ifw.pm:129
#, c-format
msgid "Port scanning"
msgstr "Scannidura de is portas"

#: network/ifw.pm:130
#, fuzzy, c-format
msgid "Service attack"
msgstr "Serbìtzius"

#: network/ifw.pm:131
#, fuzzy, c-format
msgid "Password cracking"
msgstr "Password (torra)"

#: network/ifw.pm:132
#, c-format
msgid "\"%s\" attack"
msgstr ""

#: network/ifw.pm:134
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr "%s at provau unu afracu a scannidura de portas."

#: network/ifw.pm:135
#, c-format
msgid "The %s service has been attacked by %s."
msgstr ""

#: network/ifw.pm:136
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr ""

#: network/ifw.pm:137
#, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr ""

#: network/isdn.pm:117 network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:560 network/netconnect.pm:708
#: network/netconnect.pm:712
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:160 network/netconnect.pm:395
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:395
#, c-format
msgid "I do not know"
msgstr "No sciu"

#: network/isdn.pm:161 network/netconnect.pm:395
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:395
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:601 network/netconnect.pm:618
#: network/netconnect.pm:634
#, c-format
msgid "Manual"
msgstr "Manuali"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr ""

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:493
#: network/netconnect.pm:505
#, c-format
msgid "Manual choice"
msgstr ""

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr ""

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:72
#, c-format
msgid "Manual configuration"
msgstr ""

#: network/netconnect.pm:81 standalone/drakroam:121
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr ""

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protocollu de totu s'atru mundu"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Protocolllu europeu (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""

#: network/netconnect.pm:103 standalone/harddrake2:329
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "disconnotu"

#: network/netconnect.pm:120 network/thirdparty.pm:220
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch USB modem"

#: network/netconnect.pm:121
#, c-format
msgid "Sagem USB modem"
msgstr "Sagem USB modem"

#: network/netconnect.pm:122
#, c-format
msgid "Bewan modem"
msgstr "Bewan modem"

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "ECI Hi-Focus modem"

#: network/netconnect.pm:127
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Dynamic Host Configuration Protocol (DHCP)"

#: network/netconnect.pm:128
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "Assètiu manuali de TCP/IP"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "Point to Point Tunneling Protocol (PPTP)"

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP over Ethernet (PPPoE)"

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP over ATM (PPPoA)"

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr "DSL over CAPI"

#: network/netconnect.pm:136
#, c-format
msgid "Bridged Ethernet LLC"
msgstr ""

#: network/netconnect.pm:137
#, c-format
msgid "Bridged Ethernet VC"
msgstr ""

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr ""

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr ""

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:250 standalone/drakconnect:56
#, c-format
msgid "Network & Internet Configuration"
msgstr ""

#: network/netconnect.pm:256
#, c-format
msgid "LAN connection"
msgstr "Acàpiu LAN"

#: network/netconnect.pm:257 network/netconnect.pm:276 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, c-format
msgid "Wireless connection"
msgstr "Acàpiu wireless"

#: network/netconnect.pm:258
#, c-format
msgid "ADSL connection"
msgstr "Acàpiu ADSL"

#: network/netconnect.pm:259
#, c-format
msgid "Cable connection"
msgstr "Acàpiu a cavu"

#: network/netconnect.pm:260
#, c-format
msgid "ISDN connection"
msgstr "Acàpiu ISDN"

#: network/netconnect.pm:261
#, c-format
msgid "Modem connection"
msgstr "Acàpiu a modem"

#: network/netconnect.pm:262
#, c-format
msgid "DVB connection"
msgstr "Acàpiu DVB"

#: network/netconnect.pm:272
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Sçobera ita tipu de acàpiu bolis assetiai"

#: network/netconnect.pm:287 network/netconnect.pm:786
#, c-format
msgid "Connection Configuration"
msgstr "Assètiu Acàpiu"

#: network/netconnect.pm:287 network/netconnect.pm:787
#, c-format
msgid "Please fill or check the field below"
msgstr ""

#: network/netconnect.pm:290
#, c-format
msgid "Your personal phone number"
msgstr ""

#: network/netconnect.pm:291 network/netconnect.pm:790
#, c-format
msgid "Provider name (ex provider.net)"
msgstr ""

#: network/netconnect.pm:292 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr ""

#: network/netconnect.pm:293
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr ""

#: network/netconnect.pm:294
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr ""

#: network/netconnect.pm:295 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr ""

#: network/netconnect.pm:296 standalone/drakconnect:449
#: standalone/drakconnect:517
#, c-format
msgid "Connection speed"
msgstr "Lestresa de s'acàpiu"

#: network/netconnect.pm:297 standalone/drakconnect:454
#, c-format
msgid "Connection timeout (in sec)"
msgstr ""

#: network/netconnect.pm:298 network/netconnect.pm:323
#: network/netconnect.pm:793 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr ""

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:794 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr ""

#: network/netconnect.pm:300 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr ""

#: network/netconnect.pm:301 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr ""

#: network/netconnect.pm:302 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr ""

#: network/netconnect.pm:303 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr ""

#: network/netconnect.pm:304
#, c-format
msgid "Card IO_1"
msgstr ""

#: network/netconnect.pm:319
#, c-format
msgid "Cable: account options"
msgstr ""

#: network/netconnect.pm:322
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:348 network/netconnect.pm:670
#: network/netconnect.pm:826 network/netconnect.pm:1170
#, c-format
msgid "Select the network interface to configure:"
msgstr "Sçobera s'interfaci de arretza de assetiai:"

#: network/netconnect.pm:350 network/netconnect.pm:385
#: network/netconnect.pm:671 network/netconnect.pm:828 network/shorewall.pm:70
#: standalone/drakconnect:714
#, c-format
msgid "Net Device"
msgstr "Trastu de arretza"

#: network/netconnect.pm:351 network/netconnect.pm:356
#, c-format
msgid "External ISDN modem"
msgstr "Modem ISDN foranu"

#: network/netconnect.pm:384 standalone/harddrake2:216
#, c-format
msgid "Select a device!"
msgstr "Sçobera unu trastu!"

#: network/netconnect.pm:393 network/netconnect.pm:403
#: network/netconnect.pm:413 network/netconnect.pm:446
#: network/netconnect.pm:460
#, c-format
msgid "ISDN Configuration"
msgstr "Assètiu ISDN"

#: network/netconnect.pm:394
#, c-format
msgid "What kind of card do you have?"
msgstr "Ita tipu de skeda tenis?"

#: network/netconnect.pm:404
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""

#: network/netconnect.pm:408
#, c-format
msgid "Continue"
msgstr "Sighi"

#: network/netconnect.pm:408
#, c-format
msgid "Abort"
msgstr ""

#: network/netconnect.pm:414
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Cali de is ki sighint est sa skeda ISDN tua?"

#: network/netconnect.pm:432
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:434 standalone/drakconnect:109 standalone/drakups:249
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Driver"

#: network/netconnect.pm:446
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Ita protocollu bolis impreai?"

#: network/netconnect.pm:448 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Protocollu"

#: network/netconnect.pm:460
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"Sçobera su frunidori.\n"
"Ki no est in sa lista, sçobera No in lista."

#: network/netconnect.pm:462 network/netconnect.pm:556
#: network/netconnect.pm:707
#, c-format
msgid "Provider:"
msgstr "Frunidori:"

#: network/netconnect.pm:471
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Su modem no du suportat su sistema.\n"
"Poni ogu a http://www.linmodems.org"

#: network/netconnect.pm:490
#, c-format
msgid "Select the modem to configure:"
msgstr "Sçobera su modem de assetiai:"

#: network/netconnect.pm:525
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Po praxeri, indida sa porta seriali ki su modem est acapiau."

#: network/netconnect.pm:554
#, c-format
msgid "Select your provider:"
msgstr "Sçobera su frunidori:"

#: network/netconnect.pm:578
#, c-format
msgid "Dialup: account options"
msgstr "Dialup: sceras de s'account"

#: network/netconnect.pm:581
#, c-format
msgid "Connection name"
msgstr "Nòmini de s'acàpiu:"

#: network/netconnect.pm:582
#, c-format
msgid "Phone number"
msgstr "Nùmeru de telèfunu"

#: network/netconnect.pm:583
#, c-format
msgid "Login ID"
msgstr "Login ID"

#: network/netconnect.pm:598 network/netconnect.pm:631
#, c-format
msgid "Dialup: IP parameters"
msgstr "Dialup: paràmetrus IP"

#: network/netconnect.pm:601
#, c-format
msgid "IP parameters"
msgstr "Paràmetrus IP"

#: network/netconnect.pm:602 network/netconnect.pm:941
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:284
#, c-format
msgid "IP address"
msgstr "Bivimentu IP"

#: network/netconnect.pm:603
#, c-format
msgid "Subnet mask"
msgstr "Subnet mask"

#: network/netconnect.pm:615
#, c-format
msgid "Dialup: DNS parameters"
msgstr "Dialup: paràmetrus DNS"

#: network/netconnect.pm:618
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:619
#, c-format
msgid "Domain name"
msgstr "Nòmini domìniu"

#: network/netconnect.pm:620 network/netconnect.pm:791
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr "Primu server DNS (ki bolis)"

#: network/netconnect.pm:621 network/netconnect.pm:792
#: standalone/drakconnect:993
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Segundu server DNS (ki bolis)"

#: network/netconnect.pm:622
#, c-format
msgid "Set hostname from IP"
msgstr ""

#: network/netconnect.pm:634 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: network/netconnect.pm:635 standalone/drakroam:124
#, c-format
msgid "Gateway IP address"
msgstr "Bivimentu IP de su Gateway"

#: network/netconnect.pm:670
#, c-format
msgid "ADSL configuration"
msgstr "Assètiu ADSL"

#: network/netconnect.pm:705
#, c-format
msgid "Please choose your ADSL provider"
msgstr "Po praxeri, sçobera su frunidori ADSL"

#: network/netconnect.pm:735
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""
"Po praxeri, sçobera su tipu de acàpiu DSL.\n"
"Ki no du scis, apodera su tipu predefiniu."

#: network/netconnect.pm:738
#, c-format
msgid "ADSL connection type:"
msgstr "Tipu de acàpiu ADSL:"

#: network/netconnect.pm:796
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr "Virtual Path ID (VPI):"

#: network/netconnect.pm:797
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr "Virtual Circuit ID (VCI):"

#: network/netconnect.pm:800
#, c-format
msgid "Encapsulation:"
msgstr ""

#: network/netconnect.pm:830
#, c-format
msgid "Manually load a driver"
msgstr "Càrriga a manu unu driver"

#: network/netconnect.pm:831
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr "Imprea unu driver po Windows (cun ndiswrapper)"

#: network/netconnect.pm:896
#, c-format
msgid "Zeroconf hostname resolution"
msgstr ""

#: network/netconnect.pm:897 network/netconnect.pm:928
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr ""

#: network/netconnect.pm:898
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""

#: network/netconnect.pm:929
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""

#: network/netconnect.pm:936 standalone/drakconnect:373
#, c-format
msgid "Assign host name from DHCP address"
msgstr ""

#: network/netconnect.pm:937 standalone/drakconnect:375
#, c-format
msgid "DHCP host name"
msgstr ""

#: network/netconnect.pm:942 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "Netmask"

#: network/netconnect.pm:944 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:945 standalone/drakconnect:438
#, c-format
msgid "Network Hotplugging"
msgstr ""

#: network/netconnect.pm:947 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr "Parti a s'alluidura"

#: network/netconnect.pm:949 standalone/drakconnect:460
#, c-format
msgid "Metric"
msgstr ""

#: network/netconnect.pm:950
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr ""

#: network/netconnect.pm:952 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr "Client DHCP"

#: network/netconnect.pm:954 standalone/drakconnect:379
#, c-format
msgid "DHCP timeout (in seconds)"
msgstr "DHCP timeout (in segundus)"

#: network/netconnect.pm:955 standalone/drakconnect:382
#, c-format
msgid "Get DNS servers from DHCP"
msgstr ""

#: network/netconnect.pm:956 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:957 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:965 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr ""

#: network/netconnect.pm:969 standalone/drakconnect:680
#, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr ""

#: network/netconnect.pm:973
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:978 standalone/drakTermServ:1927
#: standalone/drakTermServ:1928 standalone/drakTermServ:1929
#, c-format
msgid "%s already in use\n"
msgstr ""

#: network/netconnect.pm:1018
#, c-format
msgid "Choose an ndiswrapper driver"
msgstr ""

#: network/netconnect.pm:1020
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr ""

#: network/netconnect.pm:1020
#, c-format
msgid "Install a new driver"
msgstr ""

#: network/netconnect.pm:1032
#, c-format
msgid "Select a device:"
msgstr ""

#: network/netconnect.pm:1061
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:1064 standalone/drakconnect:404
#: standalone/drakroam:52
#, c-format
msgid "Operating Mode"
msgstr ""

#: network/netconnect.pm:1065
#, c-format
msgid "Ad-hoc"
msgstr "Ad-hoc"

#: network/netconnect.pm:1065
#, c-format
msgid "Managed"
msgstr ""

#: network/netconnect.pm:1065
#, c-format
msgid "Master"
msgstr "Master"

#: network/netconnect.pm:1065
#, c-format
msgid "Repeater"
msgstr ""

#: network/netconnect.pm:1065
#, c-format
msgid "Secondary"
msgstr ""

#: network/netconnect.pm:1065
#, c-format
msgid "Auto"
msgstr ""

#: network/netconnect.pm:1068 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:1069 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr ""

#: network/netconnect.pm:1074
#, c-format
msgid "Allow access point roaming"
msgstr ""

#: network/netconnect.pm:1076 standalone/drakconnect:406
#, c-format
msgid "Network ID"
msgstr ""

#: network/netconnect.pm:1077 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:1078 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1079 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr "Bitrate (in b/s)"

#: network/netconnect.pm:1080 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:1081
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1088 standalone/drakconnect:421
#, c-format
msgid "Fragmentation"
msgstr ""

#: network/netconnect.pm:1089 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1090
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1097 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1098
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1107 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1108
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1123
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1127
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1170
#, c-format
msgid "DVB configuration"
msgstr "Assètiu DVB"

#: network/netconnect.pm:1171
#, c-format
msgid "DVB Adapter"
msgstr "Adatadori DVB"

#: network/netconnect.pm:1188
#, c-format
msgid "DVB adapter settings"
msgstr "Assètius de s'adatadori DVB"

#: network/netconnect.pm:1191
#, c-format
msgid "Adapter card"
msgstr "Skeda adatadora"

#: network/netconnect.pm:1192
#, c-format
msgid "Net demux"
msgstr "Net demux"

#: network/netconnect.pm:1193
#, c-format
msgid "PID"
msgstr "PID"

#: network/netconnect.pm:1221
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""

#: network/netconnect.pm:1226
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1228 standalone/drakconnect:991
#, c-format
msgid "Host name (optional)"
msgstr ""

#: network/netconnect.pm:1228 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "Nòmini host"

#: network/netconnect.pm:1230
#, c-format
msgid "DNS server 1"
msgstr "DNS server 1"

#: network/netconnect.pm:1231
#, c-format
msgid "DNS server 2"
msgstr "DNS server 2"

#: network/netconnect.pm:1232
#, c-format
msgid "DNS server 3"
msgstr "DNS server 3"

#: network/netconnect.pm:1233
#, c-format
msgid "Search domain"
msgstr ""

#: network/netconnect.pm:1234
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1235
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (p.e. %s)"

#: network/netconnect.pm:1237
#, c-format
msgid "Gateway device"
msgstr ""

#: network/netconnect.pm:1246
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr ""

#: network/netconnect.pm:1251 standalone/drakconnect:685
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr ""

#: network/netconnect.pm:1264
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1268
#, c-format
msgid "Zeroconf Host name"
msgstr ""

#: network/netconnect.pm:1271
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1281
#, c-format
msgid "Do you want to allow users to start the connection?"
msgstr ""

#: network/netconnect.pm:1294
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr ""

#: network/netconnect.pm:1310
#, c-format
msgid "Automatically at boot"
msgstr "In automàtigu a s'alluidura"

#: network/netconnect.pm:1312
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1314
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1323
#, c-format
msgid "How do you want to dial this connection?"
msgstr ""

#: network/netconnect.pm:1336
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr ""

#: network/netconnect.pm:1344 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr ""

#: network/netconnect.pm:1369
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Su sistema imoi est acapiau a Internet."

#: network/netconnect.pm:1370
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Po arrexonis de siguresa, eus a segai s'acàpiu imoi."

#: network/netconnect.pm:1371
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Su sistema no parit acapiau a Internet.\n"
"Prova a assetiai torra s'acàpiu."

#: network/netconnect.pm:1386
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1389
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""

#: network/netconnect.pm:1390
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1402
#, c-format
msgid "(detected on port %s)"
msgstr ""

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1404
#, c-format
msgid "(detected %s)"
msgstr ""

#: network/netconnect.pm:1404
#, c-format
msgid "(detected)"
msgstr ""

#: network/netconnect.pm:1405
#, c-format
msgid "Network Configuration"
msgstr "Assètiu arretza"

#: network/netconnect.pm:1406
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: network/netconnect.pm:1409
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr ""

#: network/netconnect.pm:1410
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""

#: network/netconnect.pm:1411
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""

#: network/netconnect.pm:1412
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr ""

#: network/netconnect.pm:1413
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1414
#, c-format
msgid "Internet connection"
msgstr ""

#: network/netconnect.pm:1428
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:411
#, c-format
msgid "Proxies configuration"
msgstr ""

#: network/network.pm:412
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080)"
msgstr ""

#: network/network.pm:413
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:414
#, c-format
msgid "Use HTTP proxy for HTTPS connections"
msgstr ""

#: network/network.pm:415
#, c-format
msgid "HTTPS proxy"
msgstr ""

#: network/network.pm:416
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:420
#, c-format
msgid "Proxy should be http://..."
msgstr ""

#: network/network.pm:421
#, c-format
msgid "Proxy should be https?://..."
msgstr ""

#: network/network.pm:422
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr ""

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/thirdparty.pm:232
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""

#: network/thirdparty.pm:241
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/thirdparty.pm:321
#, c-format
msgid "Could not install the packages (%s)!"
msgstr "No fait a aposentai is pakitus (%s)!"

#: network/thirdparty.pm:329
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr ""

#: network/thirdparty.pm:330
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""

#: network/thirdparty.pm:332
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""

#: network/thirdparty.pm:372
#, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr ""

#: network/thirdparty.pm:374
#, c-format
msgid "No Windows system has been detected!"
msgstr ""

#: network/thirdparty.pm:384
#, c-format
msgid "Insert floppy"
msgstr "Intra unu floppy"

#: network/thirdparty.pm:385
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""

#: network/thirdparty.pm:395
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr ""

#: network/thirdparty.pm:405
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/thirdparty.pm:409 network/thirdparty.pm:411
#, c-format
msgid "Use a floppy"
msgstr "Imprea unu floppy"

#: network/thirdparty.pm:409
#, c-format
msgid "Use my Windows partition"
msgstr "Imprea sa pratzidura Windows"

#: network/thirdparty.pm:419
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/thirdparty.pm:424 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:422
#, c-format
msgid "Congratulations!"
msgstr "Cumprimentus!"

#: network/thirdparty.pm:424
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/thirdparty.pm:493
#, c-format
msgid "Looking for required software and drivers..."
msgstr ""

#: network/thirdparty.pm:498
#, c-format
msgid "Please wait, running device configuration commands..."
msgstr "Abeta, sigu is cumandus po assetiai trastus..."

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr ""

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr ""

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr ""

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr ""

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr ""

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr ""

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr ""

#: partition_table/raw.pm:253
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr ""

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr ""

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr ""

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr ""

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr ""

#: pkgs.pm:474
#, c-format
msgid "Downloading file %s..."
msgstr ""

#: printer/cups.pm:105
#, c-format
msgid "(on %s)"
msgstr ""

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr ""

#: printer/cups.pm:117 standalone/printerdrake:200
#, c-format
msgid "Configured on other machines"
msgstr ""

#: printer/cups.pm:119
#, c-format
msgid "On CUPS server \"%s\""
msgstr ""

#: printer/cups.pm:119 printer/printerdrake.pm:4909
#: printer/printerdrake.pm:4919 printer/printerdrake.pm:5078
#: printer/printerdrake.pm:5089 printer/printerdrake.pm:5303
#, c-format
msgid " (Default)"
msgstr ""

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:158
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Common Unix Printing System (server foranu)"

#: printer/data.pm:159
#, c-format
msgid "Remote CUPS"
msgstr ""

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692
#: printer/main.pm:1815 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2448
#: printer/printerdrake.pm:4004
#, c-format
msgid "Unknown model"
msgstr ""

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr ""

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "Imprentadora forana"

#: printer/main.pm:26
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Imprentadora cun server CUPS foranu"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, c-format
msgid "Printer on remote lpd server"
msgstr "Imprentadora cun server lpd foranu"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr ""

#: printer/main.pm:29
#, c-format
msgid "Printer on SMB/Windows server"
msgstr ""

#: printer/main.pm:30
#, c-format
msgid "Printer on NetWare server"
msgstr ""

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, c-format
msgid "Enter a printer device URI"
msgstr ""

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr ""

#: printer/main.pm:355 standalone/printerdrake:199
#, c-format
msgid "Configured on this machine"
msgstr ""

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr ""

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, c-format
msgid ", USB printer #%s"
msgstr ""

#: printer/main.pm:366
#, c-format
msgid ", USB printer"
msgstr ""

#: printer/main.pm:370
#, c-format
msgid ", HP printer on a parallel port"
msgstr ""

#: printer/main.pm:372
#, c-format
msgid ", HP printer on USB"
msgstr ""

#: printer/main.pm:374
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ""

#: printer/main.pm:376
#, c-format
msgid ", HP printer"
msgstr ""

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:385
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ""

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:395
#, c-format
msgid ", printing to %s"
msgstr ""

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ""

#: printer/main.pm:429
#, c-format
msgid "Parallel port #%s"
msgstr ""

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, c-format
msgid "USB printer #%s"
msgstr ""

#: printer/main.pm:434
#, c-format
msgid "USB printer"
msgstr ""

#: printer/main.pm:438
#, c-format
msgid "HP printer on a parallel port"
msgstr ""

#: printer/main.pm:440
#, c-format
msgid "HP printer on USB"
msgstr ""

#: printer/main.pm:442
#, c-format
msgid "HP printer on HP JetDirect"
msgstr ""

#: printer/main.pm:444
#, c-format
msgid "HP printer"
msgstr ""

#: printer/main.pm:450
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:453
#, c-format
msgid "Multi-function device on a parallel port"
msgstr ""

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr ""

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr ""

#: printer/main.pm:463
#, c-format
msgid "Prints into %s"
msgstr ""

#: printer/main.pm:466
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:474
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:479
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:482
#, c-format
msgid "Uses command %s"
msgstr ""

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:689 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3142
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: printer/main.pm:1309 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, c-format
msgid "Local network(s)"
msgstr ""

#: printer/main.pm:1311 printer/printerdrake.pm:227
#, c-format
msgid "Interface \"%s\""
msgstr "Interfaci \"%s\""

#: printer/main.pm:1313
#, c-format
msgid "Network %s"
msgstr "Arretza %s"

#: printer/main.pm:1315
#, c-format
msgid "Host %s"
msgstr "Host %s"

#: printer/main.pm:1344
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Porta %s)"

#: printer/main.pm:1945 printer/main.pm:2100
#, c-format
msgid "user-supplied"
msgstr ""

#: printer/main.pm:1949 printer/main.pm:2104
#, c-format
msgid "NEW"
msgstr ""

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:67
#, c-format
msgid "CUPS printer configuration"
msgstr ""

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Immoi podis sçoberai ki màkinas foranas, e calis màkinas foranas, podint "
"lompi a is imprentadoras acapiadas a custa màkina."

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Podis finas detzidi ki custa màkina potzat disponni in automàtigu de "
"imprentadoras de màkinas foranas."

#: printer/printerdrake.pm:72 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4542
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:75
#, c-format
msgid "On"
msgstr "On"

#: printer/printerdrake.pm:77 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "Off"

#: printer/printerdrake.pm:78 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:84
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:89
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: printer/printerdrake.pm:94
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr ""

#: printer/printerdrake.pm:96
#, c-format
msgid "Custom configuration"
msgstr "Assètiu personalisau"

#: printer/printerdrake.pm:101 standalone/scannerdrake:610
#: standalone/scannerdrake:627
#, c-format
msgid "No remote machines"
msgstr "Nisçuna màkina forana"

#: printer/printerdrake.pm:112
#, c-format
msgid "Additional CUPS servers: "
msgstr "Server CUPS in açunta:"

#: printer/printerdrake.pm:119
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:127
#, c-format
msgid "Japanese text printing mode"
msgstr "Modalidadi de imprenta de scritu japonesu"

#: printer/printerdrake.pm:128
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:135
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr ""

#: printer/printerdrake.pm:137
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, c-format
msgid "Sharing of local printers"
msgstr ""

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: printer/printerdrake.pm:188
#, c-format
msgid "Remove selected host/network"
msgstr ""

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr ""

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:358
#, c-format
msgid "Add server"
msgstr ""

#: printer/printerdrake.pm:364
#, c-format
msgid "Edit selected server"
msgstr ""

#: printer/printerdrake.pm:373
#, c-format
msgid "Remove selected server"
msgstr ""

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:422
#, c-format
msgid "Server IP missing!"
msgstr ""

#: printer/printerdrake.pm:428
#, c-format
msgid "The entered IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr ""

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:249 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Porta"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, c-format
msgid "On, Name or IP of remote server:"
msgstr ""

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4551
#: printer/printerdrake.pm:4617
#, c-format
msgid "CUPS server name or IP address missing."
msgstr ""

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2490
#: printer/printerdrake.pm:2524 printer/printerdrake.pm:2575
#: printer/printerdrake.pm:2582 printer/printerdrake.pm:2621
#: printer/printerdrake.pm:2663 printer/printerdrake.pm:2700
#: printer/printerdrake.pm:2711 printer/printerdrake.pm:2984
#: printer/printerdrake.pm:2989 printer/printerdrake.pm:3137
#: printer/printerdrake.pm:3248 printer/printerdrake.pm:3862
#: printer/printerdrake.pm:3929 printer/printerdrake.pm:3978
#: printer/printerdrake.pm:3981 printer/printerdrake.pm:4091
#: printer/printerdrake.pm:4149 printer/printerdrake.pm:4221
#: printer/printerdrake.pm:4242 printer/printerdrake.pm:4252
#: printer/printerdrake.pm:4342 printer/printerdrake.pm:4437
#: printer/printerdrake.pm:4443 printer/printerdrake.pm:4471
#: printer/printerdrake.pm:4578 printer/printerdrake.pm:4687
#: printer/printerdrake.pm:4707 printer/printerdrake.pm:4716
#: printer/printerdrake.pm:4731 printer/printerdrake.pm:4932
#: printer/printerdrake.pm:5407 printer/printerdrake.pm:5490
#: standalone/printerdrake:75 standalone/printerdrake:590
#, c-format
msgid "Printerdrake"
msgstr ""

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4150
#: printer/printerdrake.pm:4688
#, c-format
msgid "Reading printer data..."
msgstr ""

#: printer/printerdrake.pm:587
#, c-format
msgid "Restarting CUPS..."
msgstr ""

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""

#: printer/printerdrake.pm:622
#, c-format
msgid "Printer auto administration"
msgstr "Aministradori automàtigu imprentadora"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""

#: printer/printerdrake.pm:626
#, c-format
msgid "Do automatic configuration of new printers"
msgstr "Assètia in automàtigu is imprentadoras noas"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, c-format
msgid "when a USB printer is connected and turned on"
msgstr ""

#: printer/printerdrake.pm:630
#, c-format
msgid "when Printerdrake is started"
msgstr ""

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr ""

#: printer/printerdrake.pm:640
#, c-format
msgid "Re-enable disabled printers"
msgstr "Abiva torra is imprentadoras disabivadas"

#: printer/printerdrake.pm:644
#, c-format
msgid "when the printing system is started"
msgstr ""

#: printer/printerdrake.pm:680
#, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr ""

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""

#: printer/printerdrake.pm:686
#, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr ""

#: printer/printerdrake.pm:690
#, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr ""

#: printer/printerdrake.pm:701
#, c-format
msgid "Do not disable the printer"
msgstr "No disbivist s'imprentadora"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr ""

#: printer/printerdrake.pm:707
#, c-format
msgid "Number of retries"
msgstr ""

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr ""

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr ""

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr ""

#: printer/printerdrake.pm:748
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4934
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:772
#, c-format
msgid "The timeout must be a positive integer number!"
msgstr ""

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr ""

#: printer/printerdrake.pm:829
#, c-format
msgid "and one unknown printer"
msgstr ""

#: printer/printerdrake.pm:831
#, c-format
msgid "and %d unknown printers"
msgstr ""

#: printer/printerdrake.pm:835
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:837
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:838
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:842
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:843
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:846
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:849
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:863
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:865
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr ""

#: printer/printerdrake.pm:866
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:884
#, c-format
msgid "Do not setup printer automatically now, and never do it again"
msgstr ""

#: printer/printerdrake.pm:928
#, c-format
msgid "Searching for new printers..."
msgstr ""

#: printer/printerdrake.pm:976
#, c-format
msgid "Do not setup printer automatically again"
msgstr ""

#: printer/printerdrake.pm:983
#, c-format
msgid "New printers found"
msgstr "Imprentadoras noas agatadas"

#: printer/printerdrake.pm:984
#, c-format
msgid "New printer found"
msgstr "Imprentadora noa agatada"

#: printer/printerdrake.pm:986
#, c-format
msgid ""
"The following new printers were found and Printerdrake can automatically set "
"them up for you. If you do not want to have all of them set up, unselect the "
"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
msgstr ""

#: printer/printerdrake.pm:987
#, c-format
msgid ""
"The following new printer was found and printerdrake can automatically set "
"it up for you. If you do not want to have it set up, unselect it, or click "
"\"Cancel\".\n"
msgstr ""

#: printer/printerdrake.pm:988
#, c-format
msgid ""
"Note that for certain printer models additional packages need to be "
"installed. So keep your installation media handy.\n"
msgstr ""

#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
#, c-format
msgid "Configuring printer on %s..."
msgstr ""

#: printer/printerdrake.pm:1049
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:1050
#, c-format
msgid " on "
msgstr "in"

#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3149
#, c-format
msgid "Printer model selection"
msgstr ""

#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3150
#, c-format
msgid "Which printer model do you have?"
msgstr ""

#: printer/printerdrake.pm:1058
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3155
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4708
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr ""

#: printer/printerdrake.pm:1111
#, c-format
msgid ""
"Now you have turned off automatic printer setup.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1112
#, c-format
msgid ""
"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
"main menu. "
msgstr ""

#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4984
#, c-format
msgid "Configure Auto Administration"
msgstr "Assètia Aministradura automàtiga"

#: printer/printerdrake.pm:1113
#, c-format
msgid ""
"There you can also choose in which situation automatic printer setup is done "
"(On Printerdrake startup, on printing system startup, when connecting a new "
"USB printer)."
msgstr ""

#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
#: printer/printerdrake.pm:2460 printer/printerdrake.pm:2556
#: printer/printerdrake.pm:4951 printer/printerdrake.pm:5138
#, c-format
msgid "Add a new printer"
msgstr ""

#: printer/printerdrake.pm:1262
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: printer/printerdrake.pm:1275
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1292
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1301
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1352
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr ""

#: printer/printerdrake.pm:1355
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: printer/printerdrake.pm:1358
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:1361
#, c-format
msgid "No auto-detection"
msgstr ""

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2496
#: printer/printerdrake.pm:2633
#, c-format
msgid "Could not install the %s packages!"
msgstr ""

#: printer/printerdrake.pm:1419
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:1425
#, c-format
msgid "Detecting devices..."
msgstr ""

#: printer/printerdrake.pm:1451
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1454
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1458
#, c-format
msgid "Detected %s"
msgstr ""

#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
#: printer/printerdrake.pm:1505
#, c-format
msgid "Printer on parallel port #%s"
msgstr ""

#: printer/printerdrake.pm:1469
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1472
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1550
#, c-format
msgid "Local Printer"
msgstr ""

#: printer/printerdrake.pm:1551
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1555
#, c-format
msgid "You must enter a device or file name!"
msgstr ""

#: printer/printerdrake.pm:1565
#, c-format
msgid "No printer found!"
msgstr ""

#: printer/printerdrake.pm:1573
#, c-format
msgid "Local Printers"
msgstr ""

#: printer/printerdrake.pm:1574
#, c-format
msgid "Available printers"
msgstr ""

#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
#, c-format
msgid "The following printer was auto-detected. "
msgstr ""

#: printer/printerdrake.pm:1580
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1581
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1584
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1585
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1590
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1593
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1594
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr ""

#: printer/printerdrake.pm:1596
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1597
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr ""

#: printer/printerdrake.pm:1599
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1603
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr ""

#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
#, c-format
msgid "Aborting"
msgstr ""

#: printer/printerdrake.pm:1679
#, c-format
msgid "Remote lpd Printer Options"
msgstr ""

#: printer/printerdrake.pm:1680
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""

#: printer/printerdrake.pm:1681
#, c-format
msgid "Remote host name"
msgstr ""

#: printer/printerdrake.pm:1682
#, c-format
msgid "Remote printer name"
msgstr ""

#: printer/printerdrake.pm:1685
#, c-format
msgid "Remote host name missing!"
msgstr ""

#: printer/printerdrake.pm:1689
#, c-format
msgid "Remote printer name missing!"
msgstr ""

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318 standalone/drakTermServ:475
#: standalone/drakTermServ:807 standalone/drakTermServ:823
#: standalone/drakTermServ:1653 standalone/drakTermServ:1662
#: standalone/drakTermServ:1676 standalone/drakbackup:511
#: standalone/drakbackup:617 standalone/drakbackup:652
#: standalone/drakbackup:753 standalone/draknfs:203
#: standalone/draksambashare:627 standalone/draksambashare:794
#: standalone/harddrake2:276
#, c-format
msgid "Information"
msgstr "Sceda"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318
#, c-format
msgid "Detected model: %s %s"
msgstr ""

#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Scanning network..."
msgstr ""

#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1859
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr ""

#: printer/printerdrake.pm:1860
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""

#: printer/printerdrake.pm:1861
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1863
#, c-format
msgid "SMB server host"
msgstr ""

#: printer/printerdrake.pm:1864
#, c-format
msgid "SMB server IP"
msgstr ""

#: printer/printerdrake.pm:1865 standalone/draksambashare:67
#, c-format
msgid "Share name"
msgstr ""

#: printer/printerdrake.pm:1868
#, c-format
msgid "Workgroup"
msgstr ""

#: printer/printerdrake.pm:1870
#, c-format
msgid "Auto-detected"
msgstr ""

#: printer/printerdrake.pm:1880
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1884
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: printer/printerdrake.pm:1890
#, c-format
msgid "SECURITY WARNING!"
msgstr "AVISU DE SIGURESA!"

#: printer/printerdrake.pm:1891
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1901
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1904
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1983
#, c-format
msgid "NetWare Printer Options"
msgstr ""

#: printer/printerdrake.pm:1984
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""

#: printer/printerdrake.pm:1985
#, c-format
msgid "Printer Server"
msgstr ""

#: printer/printerdrake.pm:1986
#, c-format
msgid "Print Queue Name"
msgstr ""

#: printer/printerdrake.pm:1991
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1995
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2122
#, c-format
msgid "TCP/Socket Printer Options"
msgstr ""

#: printer/printerdrake.pm:2124
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:2125
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""

#: printer/printerdrake.pm:2129
#, c-format
msgid "Printer host name or IP missing!"
msgstr ""

#: printer/printerdrake.pm:2158
#, c-format
msgid "Printer host name or IP"
msgstr ""

#: printer/printerdrake.pm:2221
#, c-format
msgid "Refreshing Device URI list..."
msgstr ""

#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
#, c-format
msgid "Printer Device URI"
msgstr ""

#: printer/printerdrake.pm:2225
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:2249
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:2354
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:2355
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2356
#, c-format
msgid "Command line"
msgstr ""

#: printer/printerdrake.pm:2360
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:2402
#, c-format
msgid "Your printer %s is currently connected %s."
msgstr ""

#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
#, c-format
msgid "to a parallel port"
msgstr ""

#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
#, c-format
msgid "to the USB"
msgstr ""

#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
#, fuzzy, c-format
msgid "via the network"
msgstr "Alluu s'arretza"

#: printer/printerdrake.pm:2407
#, c-format
msgid "This type of connection is currently not fully supported by HPLIP."
msgstr ""

#: printer/printerdrake.pm:2409
#, c-format
msgid "You get full HPLIP support for your device if you connect it "
msgstr ""

#: printer/printerdrake.pm:2415
#, c-format
msgid ""
"You can now set up your device with HPLIP anyway (works in many cases), "
msgstr ""

#: printer/printerdrake.pm:2416
#, c-format
msgid "set it up without HPLIP (print-only), "
msgstr ""

#: printer/printerdrake.pm:2416
#, fuzzy, c-format
msgid "or"
msgstr "Ora"

#: printer/printerdrake.pm:2417
#, c-format
msgid "cancel the setup (for example to reconnect your device)."
msgstr ""

#: printer/printerdrake.pm:2419
#, c-format
msgid ""
"You can always revise your choice by clicking your printer's entry in the "
"main window, "
msgstr ""

#: printer/printerdrake.pm:2420
#, c-format
msgid "clicking the \"%s\" button, "
msgstr ""

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:300
#: standalone/drakups:360 standalone/drakups:380 standalone/drakvpn:319
#: standalone/drakvpn:680 standalone/printerdrake:245
#, c-format
msgid "Edit"
msgstr "Muda"

#: printer/printerdrake.pm:2421
#, c-format
msgid "and choosing \"%s\"."
msgstr ""

#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5334
#: printer/printerdrake.pm:5394
#, c-format
msgid "Printer connection type"
msgstr ""

#: printer/printerdrake.pm:2423 standalone/logdrake:408
#, c-format
msgid "What do you want to do?"
msgstr "Ita bolis fai?"

#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2428
#, c-format
msgid "Set up with HPLIP"
msgstr ""

#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2427
#: printer/printerdrake.pm:2430
#, c-format
msgid "Set up without HPLIP"
msgstr ""

#: printer/printerdrake.pm:2461
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2463
#, c-format
msgid ""
"To access these extra functions on HP printers they must be set up with "
"HPLIP (HP Linux Imaging and Printing). "
msgstr ""

#: printer/printerdrake.pm:2465
#, c-format
msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2491
#, c-format
msgid "Installing %s package..."
msgstr ""

#: printer/printerdrake.pm:2491 printer/printerdrake.pm:2497
#: printer/printerdrake.pm:2525
#, c-format
msgid "HPLIP"
msgstr "HPLIP"

#: printer/printerdrake.pm:2498
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2513
#, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr ""

#: printer/printerdrake.pm:2515
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2525
#, c-format
msgid "Checking device and configuring %s..."
msgstr ""

#: printer/printerdrake.pm:2557
#, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr ""

#: printer/printerdrake.pm:2576
#, c-format
msgid "HPLIP was not able to communicate with the chosen printer!"
msgstr ""

#: printer/printerdrake.pm:2577 printer/printerdrake.pm:2584
#, fuzzy, c-format
msgid "Setting up the printer without HPLIP..."
msgstr "Assètiu is mòdulus de su kernel..."

#: printer/printerdrake.pm:2583
#, c-format
msgid ""
"HPLIP did not find any local printers (Parallel, USB) which it supports!"
msgstr ""

#: printer/printerdrake.pm:2622
#, c-format
msgid "Installing SANE packages..."
msgstr ""

#: printer/printerdrake.pm:2635
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2650
#, c-format
msgid "Using and Maintaining your %s"
msgstr ""

#: printer/printerdrake.pm:2664
#, c-format
msgid "Configuring device..."
msgstr ""

#: printer/printerdrake.pm:2701
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2711 printer/printerdrake.pm:2985
#: printer/printerdrake.pm:3138
#, c-format
msgid "Reading printer database..."
msgstr ""

#: printer/printerdrake.pm:2943
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2947 printer/printerdrake.pm:4206
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: printer/printerdrake.pm:2953 printer/printerdrake.pm:4211
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: printer/printerdrake.pm:2960
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""

#: printer/printerdrake.pm:2969
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: printer/printerdrake.pm:2970
#, c-format
msgid "Name of printer"
msgstr ""

#: printer/printerdrake.pm:2971 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Description"
msgstr "Descriidura"

#: printer/printerdrake.pm:2972 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Location"
msgstr ""

#: printer/printerdrake.pm:2990
#, c-format
msgid "Preparing printer database..."
msgstr ""

#: printer/printerdrake.pm:3116
#, c-format
msgid "Your printer model"
msgstr ""

#: printer/printerdrake.pm:3117
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:3122 printer/printerdrake.pm:3125
#, c-format
msgid "The model is correct"
msgstr ""

#: printer/printerdrake.pm:3123 printer/printerdrake.pm:3124
#: printer/printerdrake.pm:3127
#, c-format
msgid "Select model manually"
msgstr ""

#: printer/printerdrake.pm:3151
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:3170
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:3202
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:3203
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:3204
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:3205
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:3206
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:3207
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:3209
#, c-format
msgid "Install PPD file from"
msgstr ""

#: printer/printerdrake.pm:3212 printer/printerdrake.pm:3220
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, c-format
msgid "Floppy Disk"
msgstr "Floppy Disk"

#: printer/printerdrake.pm:3213 printer/printerdrake.pm:3222
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, c-format
msgid "Other place"
msgstr ""

#: printer/printerdrake.pm:3228
#, c-format
msgid "Select PPD file"
msgstr ""

#: printer/printerdrake.pm:3232
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:3238
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:3249
#, c-format
msgid "Installing PPD file..."
msgstr ""

#: printer/printerdrake.pm:3368
#, c-format
msgid "OKI winprinter configuration"
msgstr ""

#: printer/printerdrake.pm:3369
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3394 printer/printerdrake.pm:3424
#, c-format
msgid "Lexmark inkjet configuration"
msgstr ""

#: printer/printerdrake.pm:3395
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3425
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3435
#, c-format
msgid "Lexmark X125 configuration"
msgstr ""

#: printer/printerdrake.pm:3436
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:3458
#, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr ""

#: printer/printerdrake.pm:3459 printer/printerdrake.pm:3486
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:3485
#, c-format
msgid "Canon LBP-460/660 configuration"
msgstr ""

#: printer/printerdrake.pm:3512
#, c-format
msgid "Canon LBP-810/1120 (CAPT) configuration"
msgstr ""

#: printer/printerdrake.pm:3513
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes or on the parallel "
"port. Please connect your printer to the USB or configure it on the machine "
"where it is directly connected to."
msgstr ""

#: printer/printerdrake.pm:3520
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3670
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3795
#, c-format
msgid "Printer default settings"
msgstr ""

#: printer/printerdrake.pm:3802
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: printer/printerdrake.pm:3806
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: printer/printerdrake.pm:3810
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3862
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""

#: printer/printerdrake.pm:3878
#, c-format
msgid "Test pages"
msgstr ""

#: printer/printerdrake.pm:3879
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3883
#, c-format
msgid "No test pages"
msgstr ""

#: printer/printerdrake.pm:3884
#, c-format
msgid "Print"
msgstr ""

#: printer/printerdrake.pm:3909
#, c-format
msgid "Standard test page"
msgstr ""

#: printer/printerdrake.pm:3912
#, c-format
msgid "Alternative test page (Letter)"
msgstr ""

#: printer/printerdrake.pm:3915
#, c-format
msgid "Alternative test page (A4)"
msgstr ""

#: printer/printerdrake.pm:3917
#, c-format
msgid "Photo test page"
msgstr ""

#: printer/printerdrake.pm:3930
#, c-format
msgid "Printing test page(s)..."
msgstr ""

#: printer/printerdrake.pm:3950
#, c-format
msgid "Skipping photo test page."
msgstr ""

#: printer/printerdrake.pm:3967
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3971
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""

#: printer/printerdrake.pm:3981
#, c-format
msgid "Did it work properly?"
msgstr ""

#: printer/printerdrake.pm:4005
#, c-format
msgid "Raw printer"
msgstr ""

#: printer/printerdrake.pm:4027
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:4029
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4032 printer/printerdrake.pm:4049
#: printer/printerdrake.pm:4059
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:4035 printer/printerdrake.pm:4075
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4039
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4054
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4046 printer/printerdrake.pm:4056
#: printer/printerdrake.pm:4066
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4051 printer/printerdrake.pm:4061
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: printer/printerdrake.pm:4064
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4068
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:4072
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4081
#, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr ""

#: printer/printerdrake.pm:4082
#, c-format
msgid "Printing on the printer \"%s\""
msgstr ""

#: printer/printerdrake.pm:4088
#, c-format
msgid "Print option list"
msgstr ""

#: printer/printerdrake.pm:4092
#, c-format
msgid "Printing option list..."
msgstr ""

#: printer/printerdrake.pm:4110
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4113
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:4114
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4118
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""

#: printer/printerdrake.pm:4119
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4121
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:4122
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4125
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4126
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:4127
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:4128
#, c-format
msgid " - Print head alignment\n"
msgstr ""

#: printer/printerdrake.pm:4129
#, c-format
msgid " - Color calibration\n"
msgstr ""

#: printer/printerdrake.pm:4170 printer/printerdrake.pm:4197
#: printer/printerdrake.pm:4232
#, c-format
msgid "Transfer printer configuration"
msgstr ""

#: printer/printerdrake.pm:4171
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:4174
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:4176
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:4178
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:4180
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4181
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4182
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: printer/printerdrake.pm:4185
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: printer/printerdrake.pm:4186 printer/printerdrake.pm:4202
#, c-format
msgid "Transfer"
msgstr ""

#: printer/printerdrake.pm:4198
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:4219
#, c-format
msgid "New printer name"
msgstr ""

#: printer/printerdrake.pm:4222
#, c-format
msgid "Transferring %s..."
msgstr ""

#: printer/printerdrake.pm:4233
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4243
#, c-format
msgid "Refreshing printer data..."
msgstr ""

#: printer/printerdrake.pm:4253
#, c-format
msgid "Starting network..."
msgstr ""

#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4300
#: printer/printerdrake.pm:4302
#, c-format
msgid "Configure the network now"
msgstr ""

#: printer/printerdrake.pm:4297
#, c-format
msgid "Network functionality not configured"
msgstr ""

#: printer/printerdrake.pm:4298
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:4301
#, c-format
msgid "Go on without configuring the network"
msgstr ""

#: printer/printerdrake.pm:4332
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""

#: printer/printerdrake.pm:4333
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:4343
#, c-format
msgid "Restarting printing system..."
msgstr ""

#: printer/printerdrake.pm:4374
#, c-format
msgid "high"
msgstr ""

#: printer/printerdrake.pm:4374
#, c-format
msgid "paranoid"
msgstr ""

#: printer/printerdrake.pm:4376
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: printer/printerdrake.pm:4377
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:4413
#, c-format
msgid "Starting the printing system at boot time"
msgstr ""

#: printer/printerdrake.pm:4414
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:4437
#, c-format
msgid "Checking installed software..."
msgstr ""

#: printer/printerdrake.pm:4443
#, c-format
msgid "Removing %s..."
msgstr ""

#: printer/printerdrake.pm:4447
#, c-format
msgid "Could not remove the %s printing system!"
msgstr ""

#: printer/printerdrake.pm:4471
#, c-format
msgid "Installing %s..."
msgstr ""

#: printer/printerdrake.pm:4475
#, c-format
msgid "Could not install the %s printing system!"
msgstr ""

#: printer/printerdrake.pm:4543
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4545
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4559
#, c-format
msgid "Name or IP of remote server:"
msgstr ""

#: printer/printerdrake.pm:4579
#, c-format
msgid "Setting Default Printer..."
msgstr ""

#: printer/printerdrake.pm:4599
#, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr ""

#: printer/printerdrake.pm:4600
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:4602
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:4603
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4604
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4606
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4607
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4608
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4610
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4614 printer/printerdrake.pm:4629
#: printer/printerdrake.pm:4633 printer/printerdrake.pm:4639
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4628
#, c-format
msgid "Local CUPS printing system"
msgstr ""

#: printer/printerdrake.pm:4667
#, c-format
msgid "Select Printer Spooler"
msgstr ""

#: printer/printerdrake.pm:4668
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr ""

#: printer/printerdrake.pm:4717
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr ""

#: printer/printerdrake.pm:4732
#, c-format
msgid "Installing Foomatic..."
msgstr ""

#: printer/printerdrake.pm:4738
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4933
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""

#: printer/printerdrake.pm:4963
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: printer/printerdrake.pm:4964
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: printer/printerdrake.pm:4975
#, c-format
msgid "CUPS configuration"
msgstr "Assètiu CUPS"

#: printer/printerdrake.pm:4996
#, c-format
msgid "Change the printing system"
msgstr ""

#: printer/printerdrake.pm:5005
#, c-format
msgid "Normal Mode"
msgstr ""

#: printer/printerdrake.pm:5006
#, c-format
msgid "Expert Mode"
msgstr ""

#: printer/printerdrake.pm:5284 printer/printerdrake.pm:5340
#: printer/printerdrake.pm:5426 printer/printerdrake.pm:5435
#, c-format
msgid "Printer options"
msgstr ""

#: printer/printerdrake.pm:5320
#, c-format
msgid "Modify printer configuration"
msgstr ""

#: printer/printerdrake.pm:5322
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""

#: printer/printerdrake.pm:5327
#, c-format
msgid "This printer is disabled"
msgstr ""

#: printer/printerdrake.pm:5329
#, c-format
msgid "Do it!"
msgstr ""

#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5400
#, c-format
msgid "Printer name, description, location"
msgstr ""

#: printer/printerdrake.pm:5337 printer/printerdrake.pm:5419
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: printer/printerdrake.pm:5338 printer/printerdrake.pm:5420
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: printer/printerdrake.pm:5342 printer/printerdrake.pm:5430
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: printer/printerdrake.pm:5347 printer/printerdrake.pm:5436
#: printer/printerdrake.pm:5438 printer/printerdrake.pm:5447
#, c-format
msgid "Enable Printer"
msgstr ""

#: printer/printerdrake.pm:5350 printer/printerdrake.pm:5441
#: printer/printerdrake.pm:5442 printer/printerdrake.pm:5444
#, c-format
msgid "Disable Printer"
msgstr ""

#: printer/printerdrake.pm:5354 printer/printerdrake.pm:5448
#, c-format
msgid "Printer communication error handling"
msgstr ""

#: printer/printerdrake.pm:5355 printer/printerdrake.pm:5452
#, c-format
msgid "Print test pages"
msgstr ""

#: printer/printerdrake.pm:5356 printer/printerdrake.pm:5454
#, c-format
msgid "Learn how to use this printer"
msgstr ""

#: printer/printerdrake.pm:5357 printer/printerdrake.pm:5456
#, c-format
msgid "Remove printer"
msgstr ""

#: printer/printerdrake.pm:5408
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr ""

#: printer/printerdrake.pm:5439
#, c-format
msgid "Printer \"%s\" is now enabled."
msgstr ""

#: printer/printerdrake.pm:5445
#, c-format
msgid "Printer \"%s\" is now disabled."
msgstr ""

#: printer/printerdrake.pm:5487
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr ""

#: printer/printerdrake.pm:5491
#, c-format
msgid "Removing printer \"%s\"..."
msgstr ""

#: printer/printerdrake.pm:5515
#, c-format
msgid "Default printer"
msgstr ""

#: printer/printerdrake.pm:5516
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: raid.pm:42
#, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr ""

#: raid.pm:146
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr ""

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:321
#: standalone/scannerdrake:370 standalone/scannerdrake:463
#: standalone/scannerdrake:507 standalone/scannerdrake:511
#: standalone/scannerdrake:533 standalone/scannerdrake:598
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:964
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr ""

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr ""

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:215
#, c-format
msgid "Security Alerts:"
msgstr ""

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, c-format
msgid "Set the root umask."
msgstr ""

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, c-format
msgid "Set the user umask."
msgstr ""

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr ""

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, c-format
msgid "Allow X Window connections"
msgstr ""

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, c-format
msgid "Chkconfig obey msec rules"
msgstr ""

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, c-format
msgid "No password aging for"
msgstr ""

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, c-format
msgid "Password history length"
msgstr ""

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, c-format
msgid "Root umask"
msgstr ""

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr ""

#: security/l10n.pm:44
#, c-format
msgid "User umask"
msgstr ""

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr ""

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr ""

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr ""

#: security/level.pm:13
#, c-format
msgid "High"
msgstr ""

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr ""

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr ""

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr ""

#: security/level.pm:57
#, c-format
msgid "Please choose the desired security level"
msgstr ""

#: security/level.pm:61
#, c-format
msgid "Security level"
msgstr ""

#: security/level.pm:63
#, c-format
msgid "Use libsafe for servers"
msgstr ""

#: security/level.pm:64
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:65
#, c-format
msgid "Security Administrator (login or email)"
msgstr ""

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr ""

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr ""

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr ""

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr ""

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr ""

#: services.pm:127 standalone/draksambashare:111
#, c-format
msgid "Printing"
msgstr "Imprenta"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Internet"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr ""

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr ""

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr ""

#: services.pm:209
#, c-format
msgid "running"
msgstr ""

#: services.pm:209
#, c-format
msgid "stopped"
msgstr ""

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr ""

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""

#: services.pm:224 ugtk2.pm:1009
#, c-format
msgid "Info"
msgstr ""

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "A s'alluidura"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Start"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Firma"

#: share/advertising/01.pl:3
#, c-format
msgid "Mandriva Linux 2006: Packs"
msgstr "Mandriva Linux 2006: pakitus"

#: share/advertising/02.pl:3
#, c-format
msgid "Mandriva Linux 2006: More features"
msgstr "Mandriva Linux 2006: prus abilidadis"

#: share/advertising/03.pl:3
#, c-format
msgid "Interactive firewall"
msgstr "Interactive firewall"

#: share/advertising/04.pl:3
#, c-format
msgid "Desktop search"
msgstr ""

#: share/advertising/05.pl:3
#, c-format
msgid "New package manager"
msgstr ""

#: share/advertising/06.pl:3
#, c-format
msgid "Mandriva Linux 2006: More performances"
msgstr "Mandriva Linux 2006: prus traballanti"

#: share/advertising/07.pl:3
#, c-format
msgid "Latest kernel and GCC"
msgstr ""

#: share/advertising/08.pl:3
#, c-format
msgid "High Availibility"
msgstr ""

#: share/advertising/09.pl:3
#, c-format
msgid "Delta RPM"
msgstr "Delta RPM"

#: share/advertising/10.pl:3
#, c-format
msgid "Low resources setup"
msgstr ""

#: share/advertising/11.pl:3
#, c-format
msgid "Boot time reduction"
msgstr "Tempus de alluidura arredùsiu"

#: share/advertising/12.pl:3
#, c-format
msgid "Mandriva Linux 2006: Easier to use"
msgstr "Mandriva Linux 2006: Prus simpli a d'impreai"

#: share/advertising/13.pl:3
#, c-format
msgid "Latest graphical interfaces: KDE and GNOME"
msgstr ""

#: share/advertising/14.pl:3
#, c-format
msgid "auto-installation servers"
msgstr "server po aposentai in automàtigu"

#: share/advertising/15.pl:3
#, c-format
msgid "Easy and quick installation"
msgstr "Aposentadura simpli e lestra"

#: share/advertising/16.pl:3
#, c-format
msgid "Easy configuration thanks to 60 wizards"
msgstr ""

#: share/advertising/17.pl:3
#, c-format
msgid "Look and feel improved"
msgstr ""

#: share/advertising/18.pl:3
#, c-format
msgid "New webmin theme"
msgstr ""

#: share/advertising/19.pl:3
#, c-format
msgid "Mandriva Linux 2006: More support"
msgstr "Mandriva Linux 2006: prus suportu"

#: share/advertising/20.pl:3
#, c-format
msgid "Better Hardware support"
msgstr "suportu hardware amellorau"

#: share/advertising/21.pl:3
#, c-format
msgid "Xen support"
msgstr "suportu Xen"

#: share/advertising/22.pl:3
#, c-format
msgid "Mandriva Linux 2006: More information"
msgstr "Mandriva Linux 2006: prus imformatzioni"

#: share/advertising/23.pl:3
#, c-format
msgid "Mandriva Linux 2006: Where to buy?"
msgstr "Mandriva Linux 2006: aundi fait a da comporai?"

#: share/advertising/24.pl:3
#, c-format
msgid "Where to find technical assistance?"
msgstr ""

#: share/advertising/25.pl:3
#, c-format
msgid "How to join the Mandriva Linux community?"
msgstr ""

#: share/advertising/26.pl:3
#, c-format
msgid "How to keep your system up-to-date?"
msgstr ""

#: share/advertising/intel.pl:3
#, c-format
msgid "Intel Software"
msgstr ""

#: share/advertising/skype.pl:3
#, c-format
msgid "Skype lets you make calls through the Internet for free."
msgstr ""

#: share/compssUsers.pl:26
#, c-format
msgid "Office Workstation"
msgstr ""

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

#: share/compssUsers.pl:34
#, c-format
msgid "Game station"
msgstr ""

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

#: share/compssUsers.pl:38
#, c-format
msgid "Multimedia station"
msgstr ""

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr ""

#: share/compssUsers.pl:44
#, c-format
msgid "Internet station"
msgstr ""

#: share/compssUsers.pl:45
#, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""

#: share/compssUsers.pl:50
#, c-format
msgid "Network Computer (client)"
msgstr ""

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr ""

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "Assètiu"

#: share/compssUsers.pl:56
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr ""

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr ""

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr ""

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr ""

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "Documentadura"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: share/compssUsers.pl:86
#, c-format
msgid "Apache"
msgstr "Apache"

#: share/compssUsers.pl:89
#, c-format
msgid "Groupware"
msgstr "Traballu in Grupu"

#: share/compssUsers.pl:90
#, c-format
msgid "Kolab Server"
msgstr "Server Kolab"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Firewall/Router"
msgstr "Firewall/Router"

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, c-format
msgid "Internet gateway"
msgstr "Gateway po Internet"

#: share/compssUsers.pl:97
#, c-format
msgid "Mail/News"
msgstr "Curreu/Noas"

#: share/compssUsers.pl:98
#, c-format
msgid "Postfix mail server, Inn news server"
msgstr "Server de curreu Postfix, server de noas Inn"

#: share/compssUsers.pl:101
#, c-format
msgid "Directory Server"
msgstr "Server de Directory"

#: share/compssUsers.pl:105
#, c-format
msgid "FTP Server"
msgstr "Server FTP"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr "ProFTPd"

#: share/compssUsers.pl:109
#, c-format
msgid "DNS/NIS"
msgstr "DNS/NIS"

#: share/compssUsers.pl:110
#, c-format
msgid "Domain Name and Network Information Server"
msgstr ""

#: share/compssUsers.pl:113
#, c-format
msgid "File and Printer Sharing Server"
msgstr ""

#: share/compssUsers.pl:114
#, c-format
msgid "NFS Server, Samba server"
msgstr "Server NFS, server Samba"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "Database"

#: share/compssUsers.pl:118
#, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "Server po Database PostGreSQL e MySQL"

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "Curreu"

#: share/compssUsers.pl:127
#, c-format
msgid "Postfix mail server"
msgstr "Server de curreu Postfix"

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "Server po Database PostGreSQL e MySQL"

#: share/compssUsers.pl:138
#, c-format
msgid "Network Computer server"
msgstr ""

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: share/compssUsers.pl:147
#, c-format
msgid "KDE Workstation"
msgstr "KDE Workstation"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

#: share/compssUsers.pl:152
#, c-format
msgid "GNOME Workstation"
msgstr "GNOME Workstation"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#: share/compssUsers.pl:156
#, c-format
msgid "IceWm Desktop"
msgstr "IceWm Desktop"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "Atras scrianias gràfigas"

#: share/compssUsers.pl:161
#, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr "Window Maker, Enlightenment, Fvwm, etc"

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr ""

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
#, c-format
msgid "SSH Server"
msgstr "Server SSH"

#: share/compssUsers.pl:191
#, c-format
msgid "Webmin"
msgstr "Webmin"

#: share/compssUsers.pl:192
#, c-format
msgid "Webmin Remote Configuration Server"
msgstr ""

#: share/compssUsers.pl:196
#, c-format
msgid "Network Utilities/Monitoring"
msgstr ""

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:201
#, c-format
msgid "Mandriva Wizards"
msgstr ""

#: share/compssUsers.pl:202
#, c-format
msgid "Wizards to configure server"
msgstr ""

#: standalone.pm:23
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:42
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:54
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:59
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""

#: standalone.pm:65
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:71
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:86
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:98
#, c-format
msgid "[keyboard]"
msgstr ""

#: standalone.pm:99
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:100
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:109
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:110
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:115
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:116
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:149
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:59
#, c-format
msgid "You need to reboot for changes to take effect"
msgstr ""

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:112 standalone/drakTermServ:118
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:129
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:135
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:144
#, c-format
msgid "Host name for client"
msgstr ""

#: standalone/drakTermServ:145
#, c-format
msgid "MAC address should be in the format 00:11:22:33:44:55"
msgstr ""

#: standalone/drakTermServ:146
#, c-format
msgid "IP address to be assigned to client"
msgstr ""

#: standalone/drakTermServ:147
#, c-format
msgid "Kernel/network adapter image to use to boot client"
msgstr ""

#: standalone/drakTermServ:148
#, c-format
msgid "Create masking files to allow configuration tools to run on client"
msgstr ""

#: standalone/drakTermServ:149
#, c-format
msgid "Applications will run on server machine"
msgstr ""

#: standalone/drakTermServ:234 standalone/drakTermServ:237
#, c-format
msgid "Terminal Server Configuration"
msgstr ""

#: standalone/drakTermServ:243
#, c-format
msgid "dhcpd Config"
msgstr ""

#: standalone/drakTermServ:247
#, c-format
msgid "Enable Server"
msgstr ""

#: standalone/drakTermServ:253
#, c-format
msgid "Disable Server"
msgstr ""

#: standalone/drakTermServ:259
#, c-format
msgid "Start Server"
msgstr ""

#: standalone/drakTermServ:265
#, c-format
msgid "Stop Server"
msgstr ""

#: standalone/drakTermServ:274
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:278
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:285
#, c-format
msgid "Add/Del Users"
msgstr ""

#: standalone/drakTermServ:289
#, c-format
msgid "Add/Del Clients"
msgstr ""

#: standalone/drakTermServ:297
#, c-format
msgid "Images"
msgstr "Images"

#: standalone/drakTermServ:298
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:316 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "Wizard po sa primu borta"

#: standalone/drakTermServ:354 standalone/drakTermServ:355
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:361
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:407
#, c-format
msgid "Cancel Wizard"
msgstr ""

#: standalone/drakTermServ:422
#, c-format
msgid "Please save dhcpd config!"
msgstr "Po praxeri, sarva s'assètiu de dhcpd!"

#: standalone/drakTermServ:450
#, c-format
msgid "Use thin clients."
msgstr ""

#: standalone/drakTermServ:452
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:454
#, c-format
msgid ""
"Please select default client type (Fat is the default type if 'Use thin' is "
"unchecked).\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:474
#, c-format
msgid "Creating net boot images for all kernels"
msgstr "Creu is màginis de alluidura de arretza po totu is kernel"

#: standalone/drakTermServ:475 standalone/drakTermServ:807
#: standalone/drakTermServ:823
#, c-format
msgid "This will take a few minutes."
msgstr "Ant a serbiri unus cantu minudus."

#: standalone/drakTermServ:481 standalone/drakTermServ:521
#, c-format
msgid "Done!"
msgstr "Fatu!"

#: standalone/drakTermServ:492 standalone/drakTermServ:894
#, c-format
msgid "%s failed"
msgstr "%s faddiu"

#: standalone/drakTermServ:501
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""

#: standalone/drakTermServ:507
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:527
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:564
#, c-format
msgid "Terminal Server Overview"
msgstr ""

#: standalone/drakTermServ:565
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and %s is just a graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:571
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. %s helps create/"
"remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:589
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that %s provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by %s.  Clients can either be "
"'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, \n"
"        %s is written for thin clients. \n"
"        System config files xdm-config, kdmrc, and gdm.conf are modified if "
"thin clients are \n"
"        used, to enable XDMCP. Since there are security issues in using "
"XDMCP, hosts.deny and \n"
"        hosts.allow are modified to limit access to the local subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by %s.  Clients can "
"either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:609
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \t%s allows export of the root filesystem to diskless clients. %s\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for %s is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:621
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. \n"
"        \t%s helps in this respect by adding or removing system users from "
"this \n"
"        \tfile."
msgstr ""

#: standalone/drakTermServ:626
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough %s, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \t%s will help create these files."
msgstr ""

#: standalone/drakTermServ:631
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough %s, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:640
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \t%s will configure this file to work in conjunction with the images "
"created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:661
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence. %s will help generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:694
#, c-format
msgid "Boot Floppy"
msgstr "Boot Floppy"

#: standalone/drakTermServ:696
#, c-format
msgid "Boot ISO"
msgstr "Boot ISO"

#: standalone/drakTermServ:698
#, c-format
msgid "PXE Image"
msgstr "Màgini PXE"

#: standalone/drakTermServ:759
#, c-format
msgid "Default kernel version"
msgstr "Versioni kernel predefinia"

#: standalone/drakTermServ:764
#, c-format
msgid "Create PXE images"
msgstr ""

#: standalone/drakTermServ:765
#, c-format
msgid "Use Unionfs (TS2)"
msgstr ""

#: standalone/drakTermServ:795
#, c-format
msgid "Install i586 kernel for older clients"
msgstr ""

#: standalone/drakTermServ:805
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: standalone/drakTermServ:812
#, c-format
msgid "No kernel selected!"
msgstr ""

#: standalone/drakTermServ:815
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:819 standalone/drakTermServ:1643
#, c-format
msgid "No NIC selected!"
msgstr ""

#: standalone/drakTermServ:822
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: standalone/drakTermServ:835
#, c-format
msgid ""
"Custom\n"
"kernel args"
msgstr ""

#: standalone/drakTermServ:840
#, c-format
msgid "<-- Delete"
msgstr "<-- Burra"

#: standalone/drakTermServ:845
#, c-format
msgid "No image selected!"
msgstr ""

#: standalone/drakTermServ:848
#, c-format
msgid "Delete All NBIs"
msgstr ""

#: standalone/drakTermServ:925
#, c-format
msgid "Building images for kernel:"
msgstr ""

#: standalone/drakTermServ:1050
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:1055
#, c-format
msgid "Add User -->"
msgstr ""

#: standalone/drakTermServ:1061
#, c-format
msgid "<-- Del User"
msgstr ""

#: standalone/drakTermServ:1097
#, c-format
msgid "type: %s"
msgstr ""

#: standalone/drakTermServ:1101
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:1136
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr ""

#: standalone/drakTermServ:1146
#, c-format
msgid "No net boot images created!"
msgstr ""

#: standalone/drakTermServ:1165
#, c-format
msgid "Thin Client"
msgstr "Thin Client"

#: standalone/drakTermServ:1169
#, c-format
msgid "Allow Thin Clients"
msgstr ""

#: standalone/drakTermServ:1170
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1171
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:1181
#, c-format
msgid "Unknown MAC address format"
msgstr ""

#: standalone/drakTermServ:1195
#, c-format
msgid "type: fat"
msgstr ""

#: standalone/drakTermServ:1196
#, c-format
msgid "type: thin"
msgstr ""

#: standalone/drakTermServ:1203
#, c-format
msgid "local config: false"
msgstr ""

#: standalone/drakTermServ:1204
#, c-format
msgid "local config: true"
msgstr ""

#: standalone/drakTermServ:1212
#, c-format
msgid "<-- Edit Client"
msgstr ""

#: standalone/drakTermServ:1237
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1244
#, c-format
msgid "Delete Client"
msgstr ""

#: standalone/drakTermServ:1267
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1313
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1328
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1362
#, c-format
msgid "Subnet:"
msgstr "Subnet:"

#: standalone/drakTermServ:1369
#, c-format
msgid "Netmask:"
msgstr "Netmask:"

#: standalone/drakTermServ:1376
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1383
#, c-format
msgid "Subnet Mask:"
msgstr "Subnet Mask:"

#: standalone/drakTermServ:1390
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1397
#, c-format
msgid "Domain Name:"
msgstr ""

#: standalone/drakTermServ:1405
#, c-format
msgid "Name Servers:"
msgstr ""

#: standalone/drakTermServ:1416
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1417
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1459
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1461
#, c-format
msgid "Write Config"
msgstr ""

#: standalone/drakTermServ:1477
#, c-format
msgid "dhcpd Server Configuration"
msgstr ""

#: standalone/drakTermServ:1478
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1481
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""

#: standalone/drakTermServ:1634
#, c-format
msgid "Write to %s failed!"
msgstr ""

#: standalone/drakTermServ:1647
#, c-format
msgid "Please insert floppy disk:"
msgstr ""

#: standalone/drakTermServ:1651
#, c-format
msgid "Could not access the floppy!"
msgstr ""

#: standalone/drakTermServ:1653
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: standalone/drakTermServ:1656
#, c-format
msgid "No floppy drive available!"
msgstr ""

#: standalone/drakTermServ:1662
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1664
#, c-format
msgid "Error writing %s/%s"
msgstr ""

#: standalone/drakTermServ:1676
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1680
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1700
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1867
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1880
#, c-format
msgid "%s is not a user..\n"
msgstr ""

#: standalone/drakTermServ:1881
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1883
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1885
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1903
#, c-format
msgid "Deleted %s...\n"
msgstr ""

#: standalone/drakTermServ:1905 standalone/drakTermServ:1978
#, c-format
msgid "%s not found...\n"
msgstr ""

#: standalone/drakTermServ:2006
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:2158
#, c-format
msgid "Configuration changed - restart %s/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38 standalone/drakhosts:123
#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
#: standalone/draknfs:546 standalone/draksambashare:187
#: standalone/draksambashare:208 standalone/draksambashare:629
#: standalone/draksambashare:796
#, c-format
msgid "Error!"
msgstr "Faddina!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr ""

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "arrepiti"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "manuali"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr ""

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr ""

#: standalone/drakautoinst:90
#, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr ""

#: standalone/drakautoinst:91
#, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr ""

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:287
#, c-format
msgid "Auto Install"
msgstr "Aposentada automàtiga"

#: standalone/drakautoinst:356
#, c-format
msgid "Add an item"
msgstr "Açungi una boxi"

#: standalone/drakautoinst:363
#, c-format
msgid "Remove the last item"
msgstr "Burra s'ùrtima boxi"

#: standalone/drakbackup:156
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Star should be selected if you want to backup EA or ACLs, otherwise choose "
"tar"
msgstr ""

#: standalone/drakbackup:163
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server. Multiple "
"users can be in a comma seperated list"
msgstr ""

#: standalone/drakbackup:164
#, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""

#: standalone/drakbackup:165
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:166
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:167
#, c-format
msgid ""
"Selecting this option allows you to view the raw output from the restore "
"process, after a file restore."
msgstr ""

#: standalone/drakbackup:168
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:169
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:343
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:347
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:392
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:476 standalone/logdrake:439
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:480 standalone/logdrake:444
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:490
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:492
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:494
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:523
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:530
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:555 standalone/drakbackup:626
#: standalone/drakbackup:682
#, c-format
msgid "Total progress"
msgstr ""

#: standalone/drakbackup:608
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:617
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:624
#, c-format
msgid "Cannot spawn %s."
msgstr ""

#: standalone/drakbackup:641
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:642
#, c-format
msgid "Bad password on %s"
msgstr ""

#: standalone/drakbackup:643
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:644
#, c-format
msgid "Can not find %s on %s"
msgstr ""

#: standalone/drakbackup:648
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:652
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:702
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:706
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:711
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:753
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:811
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: standalone/drakbackup:838
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:947
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:967 standalone/drakbackup:999
#, c-format
msgid "Backup system files..."
msgstr ""

#: standalone/drakbackup:1000 standalone/drakbackup:1039
#, c-format
msgid "Hard Disk Backup files..."
msgstr ""

#: standalone/drakbackup:1038
#, c-format
msgid "Backup User files..."
msgstr ""

#: standalone/drakbackup:1072
#, c-format
msgid "Backup Other files..."
msgstr ""

#: standalone/drakbackup:1073
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1078
#, c-format
msgid "No changes to backup!"
msgstr ""

#: standalone/drakbackup:1094 standalone/drakbackup:1116
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1103
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1104
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1106
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1121
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1126
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1135
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1136
#, c-format
msgid " Error while sending mail. \n"
msgstr ""

#: standalone/drakbackup:1166
#, c-format
msgid "Can not create catalog!"
msgstr ""

#: standalone/drakbackup:1320
#, fuzzy, c-format
msgid "Problem installing %s"
msgstr "Sçobera tipu de aposentadura"

#: standalone/drakbackup:1408
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr ""

#: standalone/drakbackup:1409 standalone/drakbackup:1472
#: standalone/drakbackup:1538
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1411 standalone/drakbackup:1474
#: standalone/drakbackup:1540
#, c-format
msgid "Use Incremental Backups"
msgstr ""

#: standalone/drakbackup:1411 standalone/drakbackup:1474
#: standalone/drakbackup:1540
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1413
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1444
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""

#: standalone/drakbackup:1471
#, c-format
msgid "Do not include the browser cache"
msgstr ""

#: standalone/drakbackup:1525
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr ""

#: standalone/drakbackup:1526 standalone/drakfont:657
#, c-format
msgid "Remove Selected"
msgstr ""

#: standalone/drakbackup:1589
#, c-format
msgid "Users"
msgstr "Umperadoris"

#: standalone/drakbackup:1609
#, c-format
msgid "Use network connection to backup"
msgstr ""

#: standalone/drakbackup:1611
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1615
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1616
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1618
#, c-format
msgid "Transfer Now"
msgstr ""

#: standalone/drakbackup:1620
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1623
#, c-format
msgid "Host name or IP."
msgstr ""

#: standalone/drakbackup:1628
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1640
#, c-format
msgid "Remember this password"
msgstr ""

#: standalone/drakbackup:1652
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1743
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1746
#, c-format
msgid "Choose your CD/DVD device"
msgstr ""

#: standalone/drakbackup:1751
#, c-format
msgid "Choose your CD/DVD media size"
msgstr ""

#: standalone/drakbackup:1758
#, c-format
msgid "Multisession CD"
msgstr ""

#: standalone/drakbackup:1760
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1766
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr ""

#: standalone/drakbackup:1767
#, c-format
msgid " Erase Now "
msgstr ""

#: standalone/drakbackup:1773
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1775
#, c-format
msgid "DVD-R media"
msgstr ""

#: standalone/drakbackup:1777
#, c-format
msgid "DVDRAM device"
msgstr ""

#: standalone/drakbackup:1808
#, c-format
msgid "No CD device defined!"
msgstr ""

#: standalone/drakbackup:1850
#, c-format
msgid "Use tape to backup"
msgstr ""

#: standalone/drakbackup:1853
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1859
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1865
#, c-format
msgid "Use tape hardware compression (EXPERIMENTAL)"
msgstr ""

#: standalone/drakbackup:1871
#, c-format
msgid "Do not rewind tape after backup"
msgstr ""

#: standalone/drakbackup:1877
#, c-format
msgid "Erase tape before backup"
msgstr ""

#: standalone/drakbackup:1883
#, c-format
msgid "Eject tape after the backup"
msgstr ""

#: standalone/drakbackup:1964
#, c-format
msgid "Enter the directory to save to:"
msgstr ""

#: standalone/drakbackup:1968
#, c-format
msgid "Directory to save to"
msgstr ""

#: standalone/drakbackup:1973
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""

#: standalone/drakbackup:1977
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""

#: standalone/drakbackup:2044
#, c-format
msgid "CD-R / DVD-R"
msgstr "CD-R / DVD-R"

#: standalone/drakbackup:2049
#, c-format
msgid "HardDrive / NFS"
msgstr ""

#: standalone/drakbackup:2064 standalone/drakbackup:2065
#: standalone/drakbackup:2070
#, c-format
msgid "hourly"
msgstr "dònnia ora"

#: standalone/drakbackup:2064 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "daily"
msgstr "dònnia dii"

#: standalone/drakbackup:2064 standalone/drakbackup:2067
#: standalone/drakbackup:2072
#, c-format
msgid "weekly"
msgstr "dònnia cida"

#: standalone/drakbackup:2064 standalone/drakbackup:2068
#: standalone/drakbackup:2073
#, c-format
msgid "monthly"
msgstr "dònnia mesi"

#: standalone/drakbackup:2064 standalone/drakbackup:2069
#: standalone/drakbackup:2074
#, c-format
msgid "custom"
msgstr "apersonau"

#: standalone/drakbackup:2078
#, c-format
msgid "January"
msgstr "Gennarju"

#: standalone/drakbackup:2078
#, c-format
msgid "February"
msgstr "Friarju"

#: standalone/drakbackup:2078
#, c-format
msgid "March"
msgstr "Martzu"

#: standalone/drakbackup:2079
#, c-format
msgid "April"
msgstr "Abrili"

#: standalone/drakbackup:2079
#, c-format
msgid "May"
msgstr "Mayu"

#: standalone/drakbackup:2079
#, c-format
msgid "June"
msgstr "Làmpadas"

#: standalone/drakbackup:2079
#, c-format
msgid "July"
msgstr "Arjolas"

#: standalone/drakbackup:2079
#, c-format
msgid "August"
msgstr "Austu"

#: standalone/drakbackup:2079
#, c-format
msgid "September"
msgstr "Cabudanni"

#: standalone/drakbackup:2080
#, c-format
msgid "October"
msgstr "Ladàmini"

#: standalone/drakbackup:2080
#, c-format
msgid "November"
msgstr "Donniasantu"

#: standalone/drakbackup:2080
#, c-format
msgid "December"
msgstr "Idas"

#: standalone/drakbackup:2083
#, c-format
msgid "Sunday"
msgstr "Domìnigu"

#: standalone/drakbackup:2083
#, c-format
msgid "Monday"
msgstr "Lunis"

#: standalone/drakbackup:2083
#, c-format
msgid "Tuesday"
msgstr "Martis"

#: standalone/drakbackup:2084
#, c-format
msgid "Wednesday"
msgstr "Mèrcuris"

#: standalone/drakbackup:2084
#, c-format
msgid "Thursday"
msgstr "Jòbia"

#: standalone/drakbackup:2084
#, c-format
msgid "Friday"
msgstr "Cenàbara"

#: standalone/drakbackup:2084
#, c-format
msgid "Saturday"
msgstr "Sàbudu"

#: standalone/drakbackup:2114
#, fuzzy, c-format
msgid "Delete cron entry"
msgstr "Burra umperadori"

#: standalone/drakbackup:2115
#, fuzzy, c-format
msgid "Add cron entry"
msgstr "Açungi computadoras"

#: standalone/drakbackup:2173
#, c-format
msgid "Use daemon"
msgstr ""

#: standalone/drakbackup:2177
#, c-format
msgid "Please choose the time interval between each backup"
msgstr ""

#: standalone/drakbackup:2185
#, c-format
msgid "Minute"
msgstr "Minudu"

#: standalone/drakbackup:2189
#, c-format
msgid "Hour"
msgstr "Ora"

#: standalone/drakbackup:2193
#, c-format
msgid "Day"
msgstr "Dii"

#: standalone/drakbackup:2197
#, c-format
msgid "Month"
msgstr "Mesi"

#: standalone/drakbackup:2201
#, fuzzy, c-format
msgid "Weekday (start)"
msgstr "Dii de sa cida"

#: standalone/drakbackup:2205
#, fuzzy, c-format
msgid "Weekday (end)"
msgstr "Dii de sa cida"

#: standalone/drakbackup:2209
#, fuzzy, c-format
msgid "Profile"
msgstr "Proxy"

#: standalone/drakbackup:2215
#, c-format
msgid "Current crontab:"
msgstr ""

#: standalone/drakbackup:2223
#, c-format
msgid "Please choose the media for backup."
msgstr ""

#: standalone/drakbackup:2227
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""

#: standalone/drakbackup:2228
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2304
#, fuzzy, c-format
msgid "Please choose the archive program"
msgstr "Sçobera unu suportu, po praxeri"

#: standalone/drakbackup:2309
#, c-format
msgid "Please choose the compression type"
msgstr ""

#: standalone/drakbackup:2313
#, c-format
msgid "Use .backupignore files"
msgstr ""

#: standalone/drakbackup:2315
#, c-format
msgid "Send mail report after each backup to:"
msgstr ""

#: standalone/drakbackup:2321
#, c-format
msgid "Return address for sent mail:"
msgstr "Bivimentu de torrada po su curreu mandau:"

#: standalone/drakbackup:2327
#, c-format
msgid "SMTP server for mail:"
msgstr "Server SMTP po su curreu:"

#: standalone/drakbackup:2331
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2332
#, c-format
msgid "View restore log after file restore."
msgstr ""

#: standalone/drakbackup:2377
#, c-format
msgid "What"
msgstr "Ita"

#: standalone/drakbackup:2382
#, c-format
msgid "Where"
msgstr "Aundi"

#: standalone/drakbackup:2387
#, c-format
msgid "When"
msgstr "Candu"

#: standalone/drakbackup:2392
#, c-format
msgid "More Options"
msgstr "Atras Sceras"

#: standalone/drakbackup:2405
#, c-format
msgid "Backup destination not configured..."
msgstr ""

#: standalone/drakbackup:2425 standalone/drakbackup:4350
#, c-format
msgid "Drakbackup Configuration"
msgstr ""

#: standalone/drakbackup:2441
#, c-format
msgid "Please choose where you want to backup"
msgstr ""

#: standalone/drakbackup:2444
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2444
#, c-format
msgid "Across Network"
msgstr ""

#: standalone/drakbackup:2444
#, c-format
msgid "On CD-R"
msgstr "Apitzus de CD-R"

#: standalone/drakbackup:2444
#, c-format
msgid "On Tape Device"
msgstr ""

#: standalone/drakbackup:2490
#, c-format
msgid "Backup Users"
msgstr ""

#: standalone/drakbackup:2491
#, c-format
msgid " (Default is all users)"
msgstr ""

#: standalone/drakbackup:2504
#, c-format
msgid "Please choose what you want to backup"
msgstr ""

#: standalone/drakbackup:2505
#, c-format
msgid "Backup System"
msgstr ""

#: standalone/drakbackup:2507
#, c-format
msgid "Select user manually"
msgstr ""

#: standalone/drakbackup:2536
#, c-format
msgid "Please select data to backup..."
msgstr ""

#: standalone/drakbackup:2608
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2609
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: standalone/drakbackup:2611
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2613
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2615
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2616
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2617
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr ""

#: standalone/drakbackup:2620
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2625
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2626
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2627
#, c-format
msgid " on device: %s"
msgstr ""

#: standalone/drakbackup:2628
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2629
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: standalone/drakbackup:2630
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2632
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2634
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2635
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2636
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""

#: standalone/drakbackup:2637
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2639
#, c-format
msgid "\tBackups use %s and bzip2\n"
msgstr ""

#: standalone/drakbackup:2640
#, c-format
msgid "\tBackups use %s and gzip\n"
msgstr ""

#: standalone/drakbackup:2641
#, c-format
msgid "\tBackups use %s only\n"
msgstr ""

#: standalone/drakbackup:2643
#, c-format
msgid "\tUse .backupignore files\n"
msgstr ""

#: standalone/drakbackup:2644
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2645
#, c-format
msgid "\tSend mail from %s\n"
msgstr ""

#: standalone/drakbackup:2646
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr ""

#: standalone/drakbackup:2648
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2649
#, c-format
msgid "\t-Hard drive.\n"
msgstr ""

#: standalone/drakbackup:2650
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: standalone/drakbackup:2651
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2652
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2653
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2654
#, c-format
msgid "\t-Network by rsync.\n"
msgstr ""

#: standalone/drakbackup:2656
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2661
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2663
#, c-format
msgid "- Restore System Files.\n"
msgstr ""

#: standalone/drakbackup:2665 standalone/drakbackup:2675
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2668
#, c-format
msgid "- Restore User Files: \n"
msgstr ""

#: standalone/drakbackup:2673
#, c-format
msgid "- Restore Other Files: \n"
msgstr ""

#: standalone/drakbackup:2852
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2854
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr ""

#: standalone/drakbackup:2864
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2885
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2886
#, c-format
msgid "          Successfully Restored on %s       "
msgstr ""

#: standalone/drakbackup:2987
#, c-format
msgid "/usr/bin/star not found, using tar..."
msgstr ""

#: standalone/drakbackup:3023
#, c-format
msgid "         Restore Configuration       "
msgstr ""

#: standalone/drakbackup:3051
#, c-format
msgid "OK to restore the other files."
msgstr ""

#: standalone/drakbackup:3067
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:3132
#, c-format
msgid "Please choose the date to restore:"
msgstr ""

#: standalone/drakbackup:3169
#, c-format
msgid "Restore from Hard Disk."
msgstr ""

#: standalone/drakbackup:3171
#, c-format
msgid "Enter the directory where backups are stored"
msgstr ""

#: standalone/drakbackup:3175
#, c-format
msgid "Directory with backups"
msgstr ""

#: standalone/drakbackup:3229
#, c-format
msgid "Select another media to restore from"
msgstr ""

#: standalone/drakbackup:3231
#, c-format
msgid "Other Media"
msgstr ""

#: standalone/drakbackup:3236
#, c-format
msgid "Restore system"
msgstr ""

#: standalone/drakbackup:3237
#, c-format
msgid "Restore Users"
msgstr ""

#: standalone/drakbackup:3238
#, c-format
msgid "Restore Other"
msgstr ""

#: standalone/drakbackup:3240
#, c-format
msgid "Select path to restore (instead of /)"
msgstr ""

#: standalone/drakbackup:3244 standalone/drakbackup:3525
#, c-format
msgid "Path To Restore To"
msgstr ""

#: standalone/drakbackup:3247
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3249
#, c-format
msgid "Remove user directories before restore."
msgstr ""

#: standalone/drakbackup:3333
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3336
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3354
#, c-format
msgid "No matches found..."
msgstr ""

#: standalone/drakbackup:3358
#, c-format
msgid "Restore Selected"
msgstr ""

#: standalone/drakbackup:3493
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3499
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3508
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""

#: standalone/drakbackup:3584
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: standalone/drakbackup:3597
#, c-format
msgid "Restore From CD"
msgstr ""

#: standalone/drakbackup:3597
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3599
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3609
#, c-format
msgid "Restore From Tape"
msgstr ""

#: standalone/drakbackup:3609
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3611
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3622
#, c-format
msgid "Restore Via Network"
msgstr ""

#: standalone/drakbackup:3622
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: standalone/drakbackup:3623
#, c-format
msgid "Host Name"
msgstr ""

#: standalone/drakbackup:3624
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3631
#, c-format
msgid "Password required"
msgstr ""

#: standalone/drakbackup:3637
#, c-format
msgid "Username required"
msgstr ""

#: standalone/drakbackup:3640
#, c-format
msgid "Hostname required"
msgstr ""

#: standalone/drakbackup:3645
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3657
#, c-format
msgid "Files Restored..."
msgstr ""

#: standalone/drakbackup:3660
#, c-format
msgid "Restore Failed..."
msgstr ""

#: standalone/drakbackup:3688
#, c-format
msgid "%s not retrieved..."
msgstr ""

#: standalone/drakbackup:3912 standalone/drakbackup:3981
#, c-format
msgid "Search for files to restore"
msgstr ""

#: standalone/drakbackup:3916
#, c-format
msgid "Restore all backups"
msgstr ""

#: standalone/drakbackup:3924
#, c-format
msgid "Custom Restore"
msgstr ""

#: standalone/drakbackup:3928 standalone/drakbackup:3977
#, c-format
msgid "Restore From Catalog"
msgstr ""

#: standalone/drakbackup:3949
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr ""

#: standalone/drakbackup:3950
#, c-format
msgid "Verify that %s is the correct path"
msgstr ""

#: standalone/drakbackup:3951
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3953
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3969
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3974
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3975
#, c-format
msgid "Directory To Restore From"
msgstr ""

#: standalone/drakbackup:4011
#, c-format
msgid "Restore Progress"
msgstr ""

#: standalone/drakbackup:4119
#, c-format
msgid "Build Backup"
msgstr ""

#: standalone/drakbackup:4152 standalone/drakbackup:4449
#, c-format
msgid "Restore"
msgstr "Arrecasça"

#: standalone/drakbackup:4244
#, c-format
msgid "Please select data to restore..."
msgstr ""

#: standalone/drakbackup:4284
#, c-format
msgid "Backup system files"
msgstr ""

#: standalone/drakbackup:4287
#, c-format
msgid "Backup user files"
msgstr ""

#: standalone/drakbackup:4290
#, c-format
msgid "Backup other files"
msgstr ""

#: standalone/drakbackup:4293 standalone/drakbackup:4327
#, c-format
msgid "Total Progress"
msgstr ""

#: standalone/drakbackup:4319
#, c-format
msgid "Sending files by FTP"
msgstr ""

#: standalone/drakbackup:4322
#, c-format
msgid "Sending files..."
msgstr ""

#: standalone/drakbackup:4392
#, c-format
msgid "Backup Now from configuration file"
msgstr ""

#: standalone/drakbackup:4397
#, c-format
msgid "View Backup Configuration."
msgstr ""

#: standalone/drakbackup:4423
#, c-format
msgid "Wizard Configuration"
msgstr ""

#: standalone/drakbackup:4428
#, c-format
msgid "Advanced Configuration"
msgstr ""

#: standalone/drakbackup:4433
#, c-format
msgid "View Configuration"
msgstr ""

#: standalone/drakbackup:4437
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4442
#, c-format
msgid "Backup Now"
msgstr ""

#: standalone/drakbackup:4446
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4484
#, fuzzy, c-format
msgid "Load profile"
msgstr "File locali"

#: standalone/drakbackup:4493
#, fuzzy, c-format
msgid "Save profile as..."
msgstr "Sarva ke..."

#: standalone/drakbackup:4515 standalone/drakbackup:4518
#, c-format
msgid "Drakbackup"
msgstr ""

#: standalone/drakboot:49
#, c-format
msgid "No bootloader found, creating a new configuration"
msgstr ""

#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_File"

#: standalone/drakboot:85 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr ""

#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:125
#, c-format
msgid "Text only"
msgstr ""

#: standalone/drakboot:126
#, c-format
msgid "Verbose"
msgstr ""

#: standalone/drakboot:127
#, c-format
msgid "Silent"
msgstr ""

#: standalone/drakboot:134
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:135
#, c-format
msgid "Do you want to configure it now?"
msgstr ""

#: standalone/drakboot:144
#, c-format
msgid "Install themes"
msgstr ""

#: standalone/drakboot:146
#, c-format
msgid "Graphical boot theme selection"
msgstr ""

#: standalone/drakboot:149
#, c-format
msgid "Graphical boot mode:"
msgstr "Modalidadi gràfiga de alluidura:"

#: standalone/drakboot:151
#, c-format
msgid "Theme"
msgstr "Tema"

#: standalone/drakboot:154
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: standalone/drakboot:159
#, c-format
msgid "Create new theme"
msgstr ""

#: standalone/drakboot:191
#, c-format
msgid "Default user"
msgstr ""

#: standalone/drakboot:192
#, c-format
msgid "Default desktop"
msgstr ""

#: standalone/drakboot:195
#, c-format
msgid "No, I do not want autologin"
msgstr ""

#: standalone/drakboot:196
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""

#: standalone/drakboot:203
#, c-format
msgid "System mode"
msgstr ""

#: standalone/drakboot:206
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr ""

#: standalone/drakboot:272
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr ""

#: standalone/drakbug:46
#, c-format
msgid "Mandriva Linux Control Center"
msgstr "Centru de Controllu Mandriva Linux"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr ""

#: standalone/drakbug:49 standalone/drakbug:152
#, c-format
msgid "Standalone Tools"
msgstr ""

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr "Mandriva Online"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr ""

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "Manijadori de is programas"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr ""

#: standalone/drakbug:58 standalone/draksambashare:1234
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr ""

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr ""

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "Pakitu: "

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "Kernel:"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""

#: standalone/drakbug:107
#, c-format
msgid "Report"
msgstr "Arrelata"

#: standalone/drakbug:162
#, c-format
msgid "Not installed"
msgstr ""

#: standalone/drakbug:174
#, c-format
msgid "Package not installed"
msgstr ""

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, c-format
msgid "not defined"
msgstr ""

#: standalone/drakclock:41
#, c-format
msgid "Change Time Zone"
msgstr ""

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "Timezone - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr ""

#: standalone/drakclock:75
#, c-format
msgid "Network Time Protocol"
msgstr ""

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "Server:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr ""

#: standalone/drakclock:224
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""

#: standalone/drakconnect:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr ""

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Interface:"
msgstr "Interfaci:"

#: standalone/drakconnect:93 standalone/net_monitor:116
#, c-format
msgid "Wait please"
msgstr ""

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "Interfaci"

#: standalone/drakconnect:109 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "State"
msgstr ""

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr ""

#: standalone/drakconnect:128
#, c-format
msgid "Configure hostname..."
msgstr ""

#: standalone/drakconnect:142 standalone/drakconnect:845
#, c-format
msgid "LAN configuration"
msgstr ""

#: standalone/drakconnect:147
#, c-format
msgid "Configure Local Area Network..."
msgstr ""

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Àprica"

#: standalone/drakconnect:188
#, c-format
msgid "Manage connections"
msgstr "Manija is acàpius"

#: standalone/drakconnect:215
#, c-format
msgid "Device selected"
msgstr ""

#: standalone/drakconnect:296
#, c-format
msgid "IP configuration"
msgstr "Assètiu IP"

#: standalone/drakconnect:335
#, c-format
msgid "DNS servers"
msgstr ""

#: standalone/drakconnect:343
#, c-format
msgid "Search Domain"
msgstr ""

#: standalone/drakconnect:351
#, c-format
msgid "static"
msgstr ""

#: standalone/drakconnect:351
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:515
#, c-format
msgid "Flow control"
msgstr "Controllu passada"

#: standalone/drakconnect:516
#, c-format
msgid "Line termination"
msgstr ""

#: standalone/drakconnect:527
#, c-format
msgid "Modem timeout"
msgstr ""

#: standalone/drakconnect:531
#, c-format
msgid "Use lock file"
msgstr ""

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:536
#, c-format
msgid "Busy wait"
msgstr ""

#: standalone/drakconnect:541
#, c-format
msgid "Modem sound"
msgstr ""

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "Abiva"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "Disabiva"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr ""

#: standalone/drakconnect:594
#, c-format
msgid "Module name"
msgstr ""

#: standalone/drakconnect:595
#, c-format
msgid "Mac Address"
msgstr ""

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr "Bus"

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr ""

#: standalone/drakconnect:700 standalone/drakgw:311
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""

#: standalone/drakconnect:709
#, c-format
msgid "Remove a network interface"
msgstr ""

#: standalone/drakconnect:713
#, c-format
msgid "Select the network interface to remove:"
msgstr ""

#: standalone/drakconnect:745
#, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""

#: standalone/drakconnect:746
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:761
#, c-format
msgid "No IP"
msgstr ""

#: standalone/drakconnect:762
#, c-format
msgid "No Mask"
msgstr ""

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "down"
msgstr ""

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Connected"
msgstr ""

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Not connected"
msgstr ""

#: standalone/drakconnect:800
#, c-format
msgid "Disconnect..."
msgstr ""

#: standalone/drakconnect:800
#, c-format
msgid "Connect..."
msgstr ""

#: standalone/drakconnect:841
#, c-format
msgid "Deactivate now"
msgstr ""

#: standalone/drakconnect:841
#, c-format
msgid "Activate now"
msgstr ""

#: standalone/drakconnect:849
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: standalone/drakconnect:863
#, c-format
msgid "LAN Configuration"
msgstr ""

#: standalone/drakconnect:875
#, c-format
msgid "Adapter %s: %s"
msgstr ""

#: standalone/drakconnect:884
#, c-format
msgid "Boot Protocol"
msgstr ""

#: standalone/drakconnect:885
#, c-format
msgid "Started on boot"
msgstr ""

#: standalone/drakconnect:921
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakconnect:975 standalone/net_applet:51
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
#, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "Assètia un'atra interfaci de arretza (LAN, ISDN, ADSL, ...)"

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr ""

#: standalone/drakconnect:994
#, c-format
msgid "Third DNS server (optional)"
msgstr ""

#: standalone/drakconnect:1016
#, c-format
msgid "Internet Connection Configuration"
msgstr ""

#: standalone/drakconnect:1017
#, c-format
msgid "Internet access"
msgstr "Intrada in Internet"

#: standalone/drakconnect:1019 standalone/net_monitor:95
#, c-format
msgid "Connection type: "
msgstr ""

#: standalone/drakconnect:1022
#, c-format
msgid "Status:"
msgstr ""

#: standalone/drakconnect:1027
#, c-format
msgid "Parameters"
msgstr "Paràmetrus"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr "GDM (GNOME Display Manager)"

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr "KDM (KDE Display Manager)"

#: standalone/drakedm:42
#, c-format
msgid "XDM (X Display Manager)"
msgstr "XDM (X Display Manager)"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:72
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr ""

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfont:182
#, c-format
msgid "Search installed fonts"
msgstr ""

#: standalone/drakfont:184
#, c-format
msgid "Unselect fonts installed"
msgstr ""

#: standalone/drakfont:207
#, c-format
msgid "parse all fonts"
msgstr ""

#: standalone/drakfont:209
#, c-format
msgid "No fonts found"
msgstr ""

#: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326
#: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393
#: standalone/drakfont:411 standalone/drakfont:425
#, c-format
msgid "done"
msgstr "fatu"

#: standalone/drakfont:222
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:257
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:260
#, c-format
msgid "Could not find any font.\n"
msgstr ""

#: standalone/drakfont:270
#, c-format
msgid "Search for fonts in installed list"
msgstr ""

#: standalone/drakfont:295
#, c-format
msgid "%s fonts conversion"
msgstr ""

#: standalone/drakfont:324
#, c-format
msgid "Fonts copy"
msgstr ""

#: standalone/drakfont:327
#, c-format
msgid "True Type fonts installation"
msgstr ""

#: standalone/drakfont:334
#, c-format
msgid "please wait during ttmkfdir..."
msgstr ""

#: standalone/drakfont:335
#, c-format
msgid "True Type install done"
msgstr ""

#: standalone/drakfont:341 standalone/drakfont:356
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:350
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:360
#, c-format
msgid "Suppress Temporary Files"
msgstr ""

#: standalone/drakfont:363
#, c-format
msgid "Restart XFS"
msgstr ""

#: standalone/drakfont:409 standalone/drakfont:419
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:421
#, c-format
msgid "xfs restart"
msgstr ""

#: standalone/drakfont:429
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:473 standalone/drakfont:482
#, c-format
msgid "DrakFont"
msgstr "DrakFont"

#: standalone/drakfont:483
#, c-format
msgid "Font List"
msgstr ""

#: standalone/drakfont:486
#, c-format
msgid "Get Windows Fonts"
msgstr "Cobera is llitras de Windows"

#: standalone/drakfont:492
#, c-format
msgid "About"
msgstr "Apitzus de"

#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724
#, c-format
msgid "Uninstall"
msgstr "Srèxina"

#: standalone/drakfont:495
#, c-format
msgid "Import"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:513
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"

#: standalone/drakfont:522
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:538
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:557
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr ""

#: standalone/drakfont:568
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:569
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:570
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:571
#, c-format
msgid "Generic Printers"
msgstr ""

#: standalone/drakfont:585
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: standalone/drakfont:586
#, c-format
msgid "File Selection"
msgstr ""

#: standalone/drakfont:590
#, c-format
msgid "Fonts"
msgstr "Litras"

#: standalone/drakfont:653
#, c-format
msgid "Import fonts"
msgstr ""

#: standalone/drakfont:658
#, c-format
msgid "Install fonts"
msgstr ""

#: standalone/drakfont:691
#, c-format
msgid "click here if you are sure."
msgstr ""

#: standalone/drakfont:693
#, c-format
msgid "here if no."
msgstr ""

#: standalone/drakfont:732
#, c-format
msgid "Unselected All"
msgstr ""

#: standalone/drakfont:735
#, c-format
msgid "Selected All"
msgstr ""

#: standalone/drakfont:738
#, c-format
msgid "Remove List"
msgstr ""

#: standalone/drakfont:749 standalone/drakfont:768
#, c-format
msgid "Importing fonts"
msgstr ""

#: standalone/drakfont:753 standalone/drakfont:773
#, c-format
msgid "Initial tests"
msgstr ""

#: standalone/drakfont:754
#, c-format
msgid "Copy fonts on your system"
msgstr ""

#: standalone/drakfont:755
#, c-format
msgid "Install & convert Fonts"
msgstr ""

#: standalone/drakfont:756
#, c-format
msgid "Post Install"
msgstr ""

#: standalone/drakfont:774
#, c-format
msgid "Remove fonts on your system"
msgstr ""

#: standalone/drakfont:775
#, c-format
msgid "Post Uninstall"
msgstr ""

#: standalone/drakgw:50 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr ""

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr ""

#: standalone/drakgw:79
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:99
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:105
#, c-format
msgid "Reconfigure"
msgstr "Torra a assetiai"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""

#: standalone/drakgw:177
#, c-format
msgid "Local Area Network settings"
msgstr ""

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr ""

#: standalone/drakgw:182
#, c-format
msgid "The internal domain name"
msgstr ""

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""

#: standalone/drakgw:204
#, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr ""

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr ""

#: standalone/drakgw:209
#, c-format
msgid "The DNS Server IP"
msgstr ""

#: standalone/drakgw:236
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:243
#, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "Imprea assètiu automàtigu (DHCP)"

#: standalone/drakgw:244
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:245
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:246
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:247
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:270
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr ""

#: standalone/drakgw:274
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr ""

#: standalone/drakgw:275
#, c-format
msgid "Admin mail"
msgstr ""

#: standalone/drakgw:276
#, c-format
msgid "Visible hostname"
msgstr ""

#: standalone/drakgw:277
#, c-format
msgid "Proxy port"
msgstr ""

#: standalone/drakgw:278
#, c-format
msgid "Cache size (MB)"
msgstr ""

#: standalone/drakgw:300
#, fuzzy, c-format
msgid "Broadcast printer information"
msgstr "Scedas discu tostau"

#: standalone/drakgw:317
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr ""

#: standalone/drakgw:323
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr ""

#: standalone/drakgw:329
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""

#: standalone/drakgw:363
#, c-format
msgid "Disabling servers..."
msgstr ""

#: standalone/drakgw:377
#, c-format
msgid "Firewalling configuration detected!"
msgstr ""

#: standalone/drakgw:378
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""

#: standalone/drakgw:383
#, c-format
msgid "Configuring..."
msgstr ""

#: standalone/drakgw:384
#, c-format
msgid "Configuring firewall..."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:51
#, c-format
msgid "Mandriva Linux Help Center"
msgstr ""

#: standalone/drakhelp:51
#, c-format
msgid "No Help entry for %s\n"
msgstr ""

#: standalone/drakhosts:98
#, c-format
msgid "Please add an host to be able to modify it."
msgstr ""

#: standalone/drakhosts:108
#, c-format
msgid "Please modify information"
msgstr "Muda informatzioni"

#: standalone/drakhosts:109
#, c-format
msgid "Please delete information"
msgstr "Burra informatzioni"

#: standalone/drakhosts:110
#, c-format
msgid "Please add information"
msgstr "Açungi informatzioni"

#: standalone/drakhosts:115
#, c-format
msgid "IP address:"
msgstr "Bivimentu IP:"

#: standalone/drakhosts:116
#, c-format
msgid "Host name:"
msgstr ""

#: standalone/drakhosts:117
#, c-format
msgid "Host Aliases:"
msgstr ""

#: standalone/drakhosts:123
#, c-format
msgid "Please enter a valid IP address."
msgstr "Intra unu bivimentu IP bonu."

#: standalone/drakhosts:129
#, c-format
msgid "Same IP is already in %s file."
msgstr ""

#: standalone/drakhosts:197
#, c-format
msgid "Host Aliases"
msgstr ""

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr ""

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr ""

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr ""

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr ""

#: standalone/drakids:26
#, c-format
msgid "Allowed addresses"
msgstr "Bivimentus permìtius"

#: standalone/drakids:57
#, c-format
msgid "Log"
msgstr ""

#: standalone/drakids:61
#, c-format
msgid "Clear logs"
msgstr "Lìmpia is arrelatas"

#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470
#, c-format
msgid "Blacklist"
msgstr "Blacklist"

#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475
#, c-format
msgid "Whitelist"
msgstr "Whitelist"

#: standalone/drakids:71
#, c-format
msgid "Remove from blacklist"
msgstr "Burra de sa blacklist"

#: standalone/drakids:72
#, c-format
msgid "Move to whitelist"
msgstr ""

#: standalone/drakids:84
#, c-format
msgid "Remove from whitelist"
msgstr "Burra de sa whitelist"

#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385
#, c-format
msgid "Unable to contact daemon"
msgstr "No potzu cuntatai su dimòniu"

#: standalone/drakids:202
#, c-format
msgid "Date"
msgstr "Data"

#: standalone/drakids:203
#, c-format
msgid "Attacker"
msgstr ""

#: standalone/drakids:204
#, c-format
msgid "Attack type"
msgstr ""

#: standalone/drakids:205
#, c-format
msgid "Service"
msgstr "Serbìtziu"

#: standalone/drakids:206 standalone/net_applet:72
#, c-format
msgid "Network interface"
msgstr "Interfaci de arretza"

#: standalone/draknfs:41
#, c-format
msgid "map root user as anonymous"
msgstr ""

#: standalone/draknfs:42
#, c-format
msgid "map all users to anonymous user"
msgstr ""

#: standalone/draknfs:43
#, c-format
msgid "No user UID mapping"
msgstr ""

#: standalone/draknfs:44
#, c-format
msgid "allow real remote root access"
msgstr ""

#: standalone/draknfs:83
#, c-format
msgid "NFS server"
msgstr "Server NFS"

#: standalone/draknfs:83
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr ""

#: standalone/draknfs:84
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr ""

#: standalone/draknfs:100 standalone/draksambashare:203
#, c-format
msgid "Directory Selection"
msgstr ""

#: standalone/draknfs:105 standalone/draksambashare:208
#, c-format
msgid "Should be a directory."
msgstr "Iat a depi essi una directory."

#: standalone/draknfs:136
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""

#: standalone/draknfs:151
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
"off root squashing. This option is mainly useful for diskless clients "
"(no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
"exported public FTP directories, news spool directories, etc. The opposite "
"option is no user UID mapping (no_all_squash), which is the default "
"setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
"the uid and gid of the anonymous account.\n"
msgstr ""

#: standalone/draknfs:167
#, c-format
msgid "Synchronous access:"
msgstr ""

#: standalone/draknfs:168
#, c-format
msgid "Secured Connection:"
msgstr ""

#: standalone/draknfs:169
#, c-format
msgid "Read-Only share:"
msgstr ""

#: standalone/draknfs:171
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr ""

#: standalone/draknfs:172
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""

#: standalone/draknfs:173
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""

#: standalone/draknfs:306
#, c-format
msgid "Please add an NFS share to be able to modify it."
msgstr ""

#: standalone/draknfs:378
#, c-format
msgid "Advanced Options Help"
msgstr ""

#: standalone/draknfs:389
#, c-format
msgid "NFS directory"
msgstr "Directory NFS"

#: standalone/draknfs:391 standalone/draksambashare:592
#: standalone/draksambashare:771
#, c-format
msgid "Directory:"
msgstr "Directory:"

#: standalone/draknfs:394
#, c-format
msgid "Host access"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Access:"
msgstr "Acessu:"

#: standalone/draknfs:396
#, c-format
msgid "Hosts Access"
msgstr ""

#: standalone/draknfs:399
#, c-format
msgid "User ID Mapping"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "User ID:"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "Help User ID"
msgstr ""

#: standalone/draknfs:402
#, c-format
msgid "Anonymous user ID:"
msgstr ""

#: standalone/draknfs:403
#, c-format
msgid "Anonymous Group ID:"
msgstr ""

#: standalone/draknfs:444
#, c-format
msgid "Can't create this directory."
msgstr ""

#: standalone/draknfs:447
#, c-format
msgid "You must specify hosts access."
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Share Directory"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Hosts Wildcard"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "General Options"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Custom Options"
msgstr ""

#: standalone/draknfs:539 standalone/draksambashare:629
#: standalone/draksambashare:796
#, c-format
msgid "Please enter a directory to share."
msgstr ""

#: standalone/draknfs:546
#, c-format
msgid "Please use the modify button to set right access."
msgstr ""

#: standalone/draknfs:600
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr ""

#: standalone/draknfs:609
#, c-format
msgid "Failed to add NFS share."
msgstr ""

#: standalone/draknfs:616
#, c-format
msgid "Failed to Modify NFS share."
msgstr ""

#: standalone/draknfs:623
#, c-format
msgid "Failed to remove an NFS share."
msgstr ""

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr ""

#: standalone/drakperm:22
#, c-format
msgid "Custom settings"
msgstr ""

#: standalone/drakperm:23
#, c-format
msgid "Custom & system settings"
msgstr ""

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "Mudaditzu"

#: standalone/drakperm:48 standalone/drakperm:323
#: standalone/draksambashare:101
#, c-format
msgid "Path"
msgstr "Mori"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Umperadori"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Grupu"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "Permissus"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr ""

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr ""

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "Andat"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "No andat"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: standalone/drakperm:122
#, c-format
msgid "Add a rule"
msgstr ""

#: standalone/drakperm:122
#, c-format
msgid "Add a new rule at the end"
msgstr ""

#: standalone/drakperm:123
#, c-format
msgid "Delete selected rule"
msgstr ""

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "sfollya"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "umperadori"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "grupu"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "atru"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Ligi"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "Scrii"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "Esecuta"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr ""

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "Umperadori:"

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "Grupu:"

#: standalone/drakperm:298
#, c-format
msgid "Current user"
msgstr ""

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""

#: standalone/drakperm:309
#, c-format
msgid "Path selection"
msgstr "Sçobera su path"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr ""

#: standalone/drakperm:380
#, c-format
msgid ""
"The first character of the path must be a slash (\"/\"):\n"
"\"%s\""
msgstr ""

#: standalone/drakperm:390
#, c-format
msgid "Both the username and the group must valid!"
msgstr ""

#: standalone/drakperm:391
#, c-format
msgid "User: %s"
msgstr "Umperador: %s"

#: standalone/drakperm:392
#, c-format
msgid "Group: %s"
msgstr "Grupu: %s"

#: standalone/drakroam:33
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakroam:48
#, c-format
msgid "SSID"
msgstr "SSID"

#: standalone/drakroam:49
#, c-format
msgid "Signal strength"
msgstr ""

#: standalone/drakroam:51
#, c-format
msgid "Encryption"
msgstr "Critadura"

#: standalone/drakroam:112
#, c-format
msgid "Please enter settings for wireless network \"%s\""
msgstr "Intra is assètius poi s'arretza wireless: \"%s\""

#: standalone/drakroam:123
#, c-format
msgid "DNS server"
msgstr "Server DNS"

#: standalone/drakroam:228
#, c-format
msgid "Connect"
msgstr "Acàpia"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:229 standalone/printerdrake:251
#, c-format
msgid "Refresh"
msgstr "Arrecasça"

#: standalone/draksambashare:68
#, c-format
msgid "Share directory"
msgstr "Acomuna directory"

#: standalone/draksambashare:69 standalone/draksambashare:102
#, c-format
msgid "Comment"
msgstr "Cumentu"

#: standalone/draksambashare:70 standalone/draksambashare:103
#, c-format
msgid "Browseable"
msgstr ""

#: standalone/draksambashare:71
#, c-format
msgid "Public"
msgstr ""

#: standalone/draksambashare:72 standalone/draksambashare:108
#, c-format
msgid "Writable"
msgstr "Scriiditzu"

#: standalone/draksambashare:73 standalone/draksambashare:149
#, c-format
msgid "Create mask"
msgstr "Crea mask"

#: standalone/draksambashare:74 standalone/draksambashare:150
#, c-format
msgid "Directory mask"
msgstr "Mask de sa directory"

#: standalone/draksambashare:75
#, c-format
msgid "Read list"
msgstr ""

#: standalone/draksambashare:76 standalone/draksambashare:109
#: standalone/draksambashare:606
#, c-format
msgid "Write list"
msgstr "Scrii lista"

#: standalone/draksambashare:77 standalone/draksambashare:141
#, c-format
msgid "Admin users"
msgstr "Aministradoris"

#: standalone/draksambashare:78 standalone/draksambashare:142
#, c-format
msgid "Valid users"
msgstr "Umperadoris"

#: standalone/draksambashare:79
#, c-format
msgid "Inherit Permissions"
msgstr "Ereda is permissus"

#: standalone/draksambashare:80 standalone/draksambashare:143
#, c-format
msgid "Hide dot files"
msgstr "Cua is file puntaus"

#: standalone/draksambashare:82 standalone/draksambashare:148
#, c-format
msgid "Preserve case"
msgstr " "

#: standalone/draksambashare:83
#, c-format
msgid "Force create mode"
msgstr ""

#: standalone/draksambashare:84
#, c-format
msgid "Force group"
msgstr ""

#: standalone/draksambashare:85 standalone/draksambashare:147
#, fuzzy, c-format
msgid "Default case"
msgstr "Predefiniu"

#: standalone/draksambashare:100
#, c-format
msgid "Printer name"
msgstr "Nòmini de s'imprentadora"

#: standalone/draksambashare:104 standalone/draksambashare:598
#, c-format
msgid "Printable"
msgstr "Imprentaditzu"

#: standalone/draksambashare:105
#, c-format
msgid "Print Command"
msgstr "Cumandu de imprenta"

#: standalone/draksambashare:106
#, c-format
msgid "LPQ command"
msgstr "Cumandu LPQ"

#: standalone/draksambashare:107
#, c-format
msgid "Guest ok"
msgstr ""

#: standalone/draksambashare:110 standalone/draksambashare:151
#: standalone/draksambashare:607
#, c-format
msgid "Inherit permissions"
msgstr "Ereda is permissus"

#: standalone/draksambashare:112
#, c-format
msgid "Create mode"
msgstr "Crea modalidadi"

#: standalone/draksambashare:113
#, c-format
msgid "Use client driver"
msgstr ""

#: standalone/draksambashare:139
#, c-format
msgid "Read List"
msgstr ""

#: standalone/draksambashare:140
#, c-format
msgid "Write List"
msgstr "scrii lista"

#: standalone/draksambashare:145
#, c-format
msgid "Force Group"
msgstr ""

#: standalone/draksambashare:146
#, c-format
msgid "Force create group"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid "About Draksambashare"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid ""
"Mandriva Linux \n"
"Release: %s\n"
"Author: Antoine Ginies\n"
"\n"
"This is a simple tool to easily manage Samba configuration."
msgstr ""

#: standalone/draksambashare:186
#, c-format
msgid "Samba server"
msgstr "Samba server"

#: standalone/draksambashare:186
#, c-format
msgid "Restarting/Reloading Samba server..."
msgstr ""

#: standalone/draksambashare:187
#, c-format
msgid "Error Restarting/Reloading Samba server"
msgstr ""

#: standalone/draksambashare:372
#, c-format
msgid "Add a Samba share"
msgstr ""

#: standalone/draksambashare:375
#, c-format
msgid "Goal of this wizard is to easily create a new Samba share."
msgstr ""

#: standalone/draksambashare:377
#, c-format
msgid "Name of the share:"
msgstr "Nòmini de su cumoni:"

#: standalone/draksambashare:378 standalone/draksambashare:591
#: standalone/draksambashare:772
#, c-format
msgid "Comment:"
msgstr "Cumentu:"

#: standalone/draksambashare:379
#, c-format
msgid "Path:"
msgstr "Mori:"

#: standalone/draksambashare:384
#, c-format
msgid ""
"Share with the same name already exist or share name empty, please choose "
"another name."
msgstr ""

#: standalone/draksambashare:388 standalone/draksambashare:394
#, c-format
msgid "Can't create the directory, please enter a correct path."
msgstr ""

#: standalone/draksambashare:391 standalone/draksambashare:627
#: standalone/draksambashare:794
#, c-format
msgid "Please enter a Comment for this share."
msgstr ""

#: standalone/draksambashare:422
#, c-format
msgid ""
"The wizard successfully added the Samba share. Now just double click on it "
"in treeview to modify it"
msgstr ""

#: standalone/draksambashare:437
#, c-format
msgid "pdf-gen - a PDF generator"
msgstr ""

#: standalone/draksambashare:438
#, c-format
msgid "printers - all printers available"
msgstr ""

#: standalone/draksambashare:442
#, c-format
msgid "Add Special Printer share"
msgstr "Açungi cumoni de Imprentadora Spetziali"

#: standalone/draksambashare:445
#, c-format
msgid ""
"Goal of this wizard is to easily create a new special printer Samba share."
msgstr ""

#: standalone/draksambashare:453
#, c-format
msgid "A PDF generator already exists."
msgstr "Unu generadori de file PDF esistit jai."

#: standalone/draksambashare:477
#, c-format
msgid "Printers and print$ already exist."
msgstr ""

#: standalone/draksambashare:528
#, c-format
msgid "The wizard successfully added the printer Samba share"
msgstr ""

#: standalone/draksambashare:551
#, c-format
msgid "Please add or select a Samba printer share to be able to modify it."
msgstr ""

#: standalone/draksambashare:587
#, c-format
msgid "Printer share"
msgstr "Cumoni de s'imprentadora"

#: standalone/draksambashare:590
#, c-format
msgid "Printer name:"
msgstr "Nòmini de s'imprentadora"

#: standalone/draksambashare:596 standalone/draksambashare:777
#, c-format
msgid "Writable:"
msgstr "Scriiditzu:"

#: standalone/draksambashare:597 standalone/draksambashare:778
#, c-format
msgid "Browseable:"
msgstr "Ligiditzu:"

#: standalone/draksambashare:602
#, c-format
msgid "Advanced options"
msgstr "Sçoberus adelantaus"

#: standalone/draksambashare:604
#, c-format
msgid "Printer access"
msgstr "Acessu a s'imprentadora"

#: standalone/draksambashare:608
#, c-format
msgid "Guest ok:"
msgstr ""

#: standalone/draksambashare:609
#, c-format
msgid "Create mode:"
msgstr "Crea modalidadi:"

#: standalone/draksambashare:613
#, c-format
msgid "Printer command"
msgstr "Cumandu de s'imprentadora"

#: standalone/draksambashare:615
#, c-format
msgid "Print command:"
msgstr ""

#: standalone/draksambashare:616
#, c-format
msgid "LPQ command:"
msgstr "Cumandu LPQ:"

#: standalone/draksambashare:617
#, c-format
msgid "Printing:"
msgstr "Imprentu:"

#: standalone/draksambashare:633
#, c-format
msgid "create mode should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:695
#, c-format
msgid "DrakSamba entry"
msgstr "Boxi de DrakSamba"

#: standalone/draksambashare:700
#, c-format
msgid "Please add or select a Samba share to be able to modify it."
msgstr ""

#: standalone/draksambashare:723
#, c-format
msgid "Samba user access"
msgstr "Acessu de umperadori Samba"

#: standalone/draksambashare:731
#, c-format
msgid "Mask options"
msgstr "Sçoberus de mask"

#: standalone/draksambashare:745
#, c-format
msgid "Display options"
msgstr ""

#: standalone/draksambashare:767
#, c-format
msgid "Samba share directory"
msgstr "Cumoni de directory Samba"

#: standalone/draksambashare:770
#, c-format
msgid "Share name:"
msgstr "Nòmini de su cumoni:"

#: standalone/draksambashare:776
#, c-format
msgid "Public:"
msgstr "Pùbrigu:"

#: standalone/draksambashare:800
#, c-format
msgid ""
"Create mask, create mode and directory mask should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:807
#, c-format
msgid "Please create this Samba user: %s"
msgstr ""

#: standalone/draksambashare:930
#, c-format
msgid "User information"
msgstr "Informatzioni umperadori"

#: standalone/draksambashare:932
#, c-format
msgid "User name:"
msgstr "Nòmini umperadori:"

#: standalone/draksambashare:933 standalone/harddrake2:601
#, c-format
msgid "Password:"
msgstr "Password:"

#: standalone/draksambashare:1133
#, c-format
msgid "Failed to add Samba share."
msgstr ""

#: standalone/draksambashare:1142
#, c-format
msgid "Failed to Modify Samba share."
msgstr ""

#: standalone/draksambashare:1151
#, c-format
msgid "Failed to remove a Samba share."
msgstr ""

#: standalone/draksambashare:1158
#, c-format
msgid "File share"
msgstr ""

#: standalone/draksambashare:1166
#, c-format
msgid "Add printers"
msgstr "Açungi imprentadoras"

#: standalone/draksambashare:1172
#, c-format
msgid "Failed to add printers."
msgstr ""

#: standalone/draksambashare:1181
#, c-format
msgid "Failed to Modify."
msgstr ""

#: standalone/draksambashare:1190
#, c-format
msgid "Failed to remove."
msgstr ""

#: standalone/draksambashare:1197
#, c-format
msgid "Printers"
msgstr "Imprentadoras"

#: standalone/draksambashare:1205
#, c-format
msgid "Change password"
msgstr "Muda password"

#: standalone/draksambashare:1210
#, c-format
msgid "Failed to change user password."
msgstr ""

#: standalone/draksambashare:1218
#, c-format
msgid "Failed to add user."
msgstr ""

#: standalone/draksambashare:1221
#, c-format
msgid "Delete user"
msgstr "Burra umperadori"

#: standalone/draksambashare:1230
#, c-format
msgid "Failed to delete user."
msgstr ""

#: standalone/draksambashare:1242
#, c-format
msgid "Samba Users"
msgstr "Umperadoris Samba"

#: standalone/draksambashare:1251
#, c-format
msgid "DrakSamba manage Samba shares"
msgstr ""

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr "TOTU"

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr "LOCALI"

#: standalone/draksec:51
#, c-format
msgid "NONE"
msgstr ""

#: standalone/draksec:53 standalone/net_applet:480
#, c-format
msgid "Ignore"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:103
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:156 standalone/harddrake2:208
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: standalone/draksec:170
#, c-format
msgid "(default value: %s)"
msgstr ""

#: standalone/draksec:212
#, c-format
msgid "Security Level:"
msgstr ""

#: standalone/draksec:219
#, c-format
msgid "Security Administrator:"
msgstr ""

#: standalone/draksec:221
#, c-format
msgid "Basic options"
msgstr ""

#: standalone/draksec:235
#, c-format
msgid "Network Options"
msgstr ""

#: standalone/draksec:235
#, c-format
msgid "System Options"
msgstr ""

#: standalone/draksec:270
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:300
#, c-format
msgid "Please wait, setting security level..."
msgstr ""

#: standalone/draksec:306
#, c-format
msgid "Please wait, setting security options..."
msgstr ""

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""

#: standalone/draksplash:30
#, c-format
msgid "x coordinate of text box"
msgstr ""

#: standalone/draksplash:31
#, c-format
msgid "y coordinate of text box"
msgstr ""

#: standalone/draksplash:32
#, c-format
msgid "text box width"
msgstr ""

#: standalone/draksplash:33
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:34
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:35
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:36
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:37
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:38
#, c-format
msgid "x coordinate of the text"
msgstr ""

#: standalone/draksplash:39
#, c-format
msgid "y coordinate of the text"
msgstr ""

#: standalone/draksplash:40
#, c-format
msgid "text box transparency"
msgstr ""

#: standalone/draksplash:41
#, c-format
msgid "progress box transparency"
msgstr ""

#: standalone/draksplash:42
#, c-format
msgid "text size"
msgstr "mesura de su scritu"

#: standalone/draksplash:59
#, c-format
msgid "Choose progress bar color 1"
msgstr ""

#: standalone/draksplash:60
#, c-format
msgid "Choose progress bar color 2"
msgstr ""

#: standalone/draksplash:61
#, c-format
msgid "Choose progress bar background"
msgstr ""

#: standalone/draksplash:62
#, c-format
msgid "Gradient type"
msgstr ""

#: standalone/draksplash:63
#, c-format
msgid "Choose text color"
msgstr "Sçobera colori de su scritu"

#: standalone/draksplash:65 standalone/draksplash:72
#, c-format
msgid "Choose picture"
msgstr ""

#: standalone/draksplash:66
#, c-format
msgid "Silent bootsplash"
msgstr ""

#: standalone/draksplash:69
#, c-format
msgid "Choose text zone color"
msgstr "Sçobera colori de fundu de su scritu"

#: standalone/draksplash:70
#, c-format
msgid "Text color"
msgstr ""

#: standalone/draksplash:71
#, c-format
msgid "Background color"
msgstr ""

#: standalone/draksplash:73
#, c-format
msgid "Verbose bootsplash"
msgstr ""

#: standalone/draksplash:75
#, c-format
msgid "Display logo on Console"
msgstr ""

#: standalone/draksplash:78
#, c-format
msgid "Console bootsplash"
msgstr ""

#: standalone/draksplash:84
#, c-format
msgid "Theme name"
msgstr ""

#: standalone/draksplash:87
#, c-format
msgid "final resolution"
msgstr ""

#: standalone/draksplash:92
#, c-format
msgid "Save theme"
msgstr ""

#: standalone/draksplash:153
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:162
#, c-format
msgid "Unable to load image file %s"
msgstr ""

#: standalone/draksplash:173
#, c-format
msgid "choose image"
msgstr ""

#: standalone/draksplash:188
#, c-format
msgid "Color selection"
msgstr "Sçoberu colori"

#: standalone/drakups:71
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:78
#, c-format
msgid "Add an UPS device"
msgstr ""

#: standalone/drakups:81
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""

#: standalone/drakups:88
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:91
#, c-format
msgid "Autodetection"
msgstr ""

#: standalone/drakups:99 standalone/harddrake2:376
#, c-format
msgid "Detection in progress"
msgstr ""

#: standalone/drakups:119
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:121
#, c-format
msgid "No new UPS devices was found"
msgstr ""

#: standalone/drakups:126 standalone/drakups:138
#, c-format
msgid "UPS driver configuration"
msgstr ""

#: standalone/drakups:126
#, c-format
msgid "Please select your UPS model."
msgstr ""

#: standalone/drakups:127
#, c-format
msgid "Manufacturer / Model:"
msgstr ""

#: standalone/drakups:138
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:143
#, c-format
msgid "Name:"
msgstr "Nòmini:"

#: standalone/drakups:143
#, c-format
msgid "The name of your ups"
msgstr ""

#: standalone/drakups:144
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Port:"
msgstr "Porta:"

#: standalone/drakups:147
#, c-format
msgid "The port on which is connected your ups"
msgstr ""

#: standalone/drakups:157
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:248
#, c-format
msgid "UPS devices"
msgstr "Trastus UPS"

#: standalone/drakups:249 standalone/drakups:268 standalone/drakups:284
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "Nòmini"

#: standalone/drakups:267
#, c-format
msgid "UPS users"
msgstr ""

#: standalone/drakups:283
#, c-format
msgid "Access Control Lists"
msgstr ""

#: standalone/drakups:284
#, c-format
msgid "IP mask"
msgstr "IP mask"

#: standalone/drakups:296
#, c-format
msgid "Rules"
msgstr ""

#: standalone/drakups:297
#, c-format
msgid "Action"
msgstr "Atzioni"

#: standalone/drakups:297 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "Arrasu"

#: standalone/drakups:297
#, c-format
msgid "ACL name"
msgstr ""

#: standalone/drakups:327 standalone/drakups:331 standalone/drakups:340
#, c-format
msgid "DrakUPS"
msgstr "DrakUPS"

#: standalone/drakups:337
#, c-format
msgid "Welcome to the UPS configuration tools"
msgstr ""

#: standalone/drakvpn:73
#, c-format
msgid "DrakVPN"
msgstr "DrakVPN"

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr ""

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr ""

#: standalone/drakvpn:101 standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr ""

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr ""

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr ""

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr ""

#: standalone/drakvpn:121
#, c-format
msgid "VPN connection currently disabled"
msgstr ""

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "abiva"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr ""

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr ""

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, c-format
msgid "Kernel module."
msgstr ""

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr ""

#: standalone/drakvpn:278
#, c-format
msgid "Security Policies"
msgstr ""

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:281 standalone/drakvpn:292
#, c-format
msgid "Configuration file"
msgstr ""

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:311 standalone/drakvpn:671
#, c-format
msgid "%s entries"
msgstr ""

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Commit"
msgstr ""

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr ""

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:362
#, c-format
msgid "config setup"
msgstr ""

#: standalone/drakvpn:362
#, c-format
msgid "conn %default"
msgstr ""

#: standalone/drakvpn:362
#, c-format
msgid "normal conn"
msgstr ""

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, c-format
msgid "Exists!"
msgstr "Esistit!"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:391
#, c-format
msgid "interfaces"
msgstr "interfacIs"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr "klipsdebug"

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr "plutodebug"

#: standalone/drakvpn:394
#, c-format
msgid "plutoload"
msgstr "plutoload"

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr "plutostart"

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr "uniqueids"

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:437
#, c-format
msgid "PFS"
msgstr "PFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr "keyingtries"

#: standalone/drakvpn:439
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr "disablearrivalcheck"

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "left"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr "leftcert"

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr "leftrsasigkey"

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr "leftsubnet"

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr "leftnexthop"

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:477
#, c-format
msgid "section name"
msgstr ""

#: standalone/drakvpn:478
#, c-format
msgid "authby"
msgstr ""

#: standalone/drakvpn:479
#, c-format
msgid "auto"
msgstr ""

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr ""

#: standalone/drakvpn:486
#, c-format
msgid "rightcert"
msgstr ""

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:562 standalone/drakvpn:812
#, c-format
msgid "Edit section"
msgstr ""

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, c-format
msgid "Section names"
msgstr ""

#: standalone/drakvpn:576
#, c-format
msgid "Can not edit!"
msgstr ""

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:642 standalone/drakvpn:859
#, c-format
msgid "Remove section"
msgstr ""

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:721
#, c-format
msgid "path"
msgstr "mori"

#: standalone/drakvpn:721
#, c-format
msgid "remote"
msgstr "atesu"

#: standalone/drakvpn:721
#, c-format
msgid "sainfo"
msgstr "sainfo"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:732
#, c-format
msgid "path type"
msgstr ""

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:756 standalone/drakvpn:849
#, c-format
msgid "real file"
msgstr ""

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:927
#, c-format
msgid "Sainfo source protocol"
msgstr ""

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:960
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:982
#, c-format
msgid "Lifetime number"
msgstr ""

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1019
#, c-format
msgid "Authentication algorithm"
msgstr ""

#: standalone/drakvpn:1021
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1022
#, c-format
msgid "deflate"
msgstr ""

#: standalone/drakvpn:1029
#, c-format
msgid "Remote"
msgstr "Atesu"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1038
#, c-format
msgid "Exchange mode"
msgstr ""

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1046
#, c-format
msgid "Generate policy"
msgstr ""

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr "off"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "on"
msgstr "on"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1062
#, c-format
msgid "Passive"
msgstr ""

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1067
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1069
#, c-format
msgid "My certfile"
msgstr ""

#: standalone/drakvpn:1070
#, c-format
msgid "Name of the certificate"
msgstr ""

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1072
#, c-format
msgid "Name of the private key"
msgstr ""

#: standalone/drakvpn:1073
#, c-format
msgid "Peers certfile"
msgstr ""

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1075
#, c-format
msgid "Verify cert"
msgstr ""

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1100
#, c-format
msgid "Peers identifier"
msgstr ""

#: standalone/drakvpn:1101
#, c-format
msgid "Proposal"
msgstr ""

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1112
#, c-format
msgid "DH group"
msgstr ""

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "Cumandu"

#: standalone/drakvpn:1120
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1122
#, c-format
msgid "Upper-layer protocol"
msgstr ""

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, c-format
msgid "any"
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "Flag"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr ""

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1126
#, c-format
msgid "ipsec"
msgstr "ipsec"

#: standalone/drakvpn:1126
#, c-format
msgid "discard"
msgstr ""

#: standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr ""

#: standalone/drakvpn:1129
#, c-format
msgid "tunnel"
msgstr "tunnel"

#: standalone/drakvpn:1129
#, c-format
msgid "transport"
msgstr ""

#: standalone/drakvpn:1131
#, c-format
msgid "Source/destination"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "use"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "unique"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr ""

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr ""

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr ""

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr ""

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr ""

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr ""

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr ""

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr ""

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr ""

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr ""

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr ""

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr ""

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr ""

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr ""

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/finish-install:42 standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Sçobera su skema de su tecrau"

#: standalone/harddrake2:25
#, c-format
msgid "Alternative drivers"
msgstr ""

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: standalone/harddrake2:31 standalone/harddrake2:146
#, c-format
msgid "Bus identification"
msgstr ""

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:39
#, c-format
msgid "this field describes the device"
msgstr ""

#: standalone/harddrake2:40
#, c-format
msgid "Old device file"
msgstr ""

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:42
#, c-format
msgid "New devfs device"
msgstr ""

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr ""

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""

#: standalone/harddrake2:47
#, c-format
msgid "Extended partitions"
msgstr ""

#: standalone/harddrake2:47
#, c-format
msgid "the number of extended partitions"
msgstr ""

#: standalone/harddrake2:48
#, c-format
msgid "Geometry"
msgstr ""

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "Disk controller"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr ""

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:224
#, c-format
msgid "Model"
msgstr ""

#: standalone/harddrake2:51
#, c-format
msgid "hard disk model"
msgstr ""

#: standalone/harddrake2:52
#, c-format
msgid "network printer port"
msgstr ""

#: standalone/harddrake2:53
#, c-format
msgid "Primary partitions"
msgstr ""

#: standalone/harddrake2:53
#, c-format
msgid "the number of the primary partitions"
msgstr ""

#: standalone/harddrake2:54
#, c-format
msgid "the vendor name of the device"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr "Bus PCI #"

#: standalone/harddrake2:55
#, c-format
msgid "the PCI bus on which the device is plugged"
msgstr ""

#: standalone/harddrake2:56
#, c-format
msgid "PCI device #"
msgstr ""

#: standalone/harddrake2:56
#, c-format
msgid "PCI device number"
msgstr ""

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:57
#, c-format
msgid "PCI function number"
msgstr ""

#: standalone/harddrake2:58
#, c-format
msgid "Vendor ID"
msgstr ""

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, c-format
msgid "Device ID"
msgstr ""

#: standalone/harddrake2:59
#, c-format
msgid "this is the numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:61
#, c-format
msgid "Sub device ID"
msgstr ""

#: standalone/harddrake2:61
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:62
#, c-format
msgid "Device USB ID"
msgstr ""

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:67
#, c-format
msgid "Cache size"
msgstr ""

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr ""

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: standalone/harddrake2:72
#, c-format
msgid "Cpuid level"
msgstr ""

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr ""

#: standalone/harddrake2:84
#, c-format
msgid "Model name"
msgstr ""

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr ""

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "Processor ID"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr ""

#: standalone/harddrake2:87
#, c-format
msgid "Model stepping"
msgstr ""

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr ""

#: standalone/harddrake2:89
#, c-format
msgid "Write protection"
msgstr ""

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:93
#, c-format
msgid "Floppy format"
msgstr ""

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:97
#, c-format
msgid "Channel"
msgstr ""

#: standalone/harddrake2:97
#, c-format
msgid "EIDE/SCSI channel"
msgstr ""

#: standalone/harddrake2:98
#, c-format
msgid "Disk identifier"
msgstr ""

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:99
#, c-format
msgid "Logical unit number"
msgstr ""

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, c-format
msgid "Installed size"
msgstr ""

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:107
#, c-format
msgid "Enabled Size"
msgstr ""

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, c-format
msgid "type of the memory device"
msgstr ""

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr ""

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:110
#, c-format
msgid "Bank connections"
msgstr ""

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:115
#, c-format
msgid "Device file"
msgstr ""

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "whether the wheel is emulated or not"
msgstr ""

#: standalone/harddrake2:117
#, c-format
msgid "the type of the mouse"
msgstr ""

#: standalone/harddrake2:118
#, c-format
msgid "the name of the mouse"
msgstr ""

#: standalone/harddrake2:119
#, c-format
msgid "Number of buttons"
msgstr ""

#: standalone/harddrake2:119
#, c-format
msgid "the number of buttons the mouse has"
msgstr ""

#: standalone/harddrake2:120
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:342
#, c-format
msgid "Identification"
msgstr ""

#: standalone/harddrake2:129 standalone/harddrake2:145
#, c-format
msgid "Connection"
msgstr "Acàpiu"

#: standalone/harddrake2:138
#, c-format
msgid "Performances"
msgstr ""

#: standalone/harddrake2:139
#, c-format
msgid "Bugs"
msgstr ""

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr "FPU"

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "Trastu"

#: standalone/harddrake2:148
#, c-format
msgid "Partitions"
msgstr "Pratziduras"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr ""

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:146 standalone/printerdrake:159
#: standalone/printerdrake:171
#, c-format
msgid "/_Options"
msgstr "/Sc_eras"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:172 standalone/printerdrake:174
#: standalone/printerdrake:177 standalone/printerdrake:179
#, c-format
msgid "/_Help"
msgstr "/A_judu"

#: standalone/harddrake2:181
#, c-format
msgid "/Autodetect _printers"
msgstr ""

#: standalone/harddrake2:182
#, c-format
msgid "/Autodetect _modems"
msgstr ""

#: standalone/harddrake2:183
#, c-format
msgid "/Autodetect _jaz drives"
msgstr ""

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr ""

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:192 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/_Bessi"

#: standalone/harddrake2:205
#, c-format
msgid "/_Fields description"
msgstr ""

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr ""

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:222 standalone/printerdrake:177
#, c-format
msgid "/_Report Bug"
msgstr "/A_rrelata Farta"

#: standalone/harddrake2:224 standalone/printerdrake:179
#, c-format
msgid "/_About..."
msgstr "/A_pitzus de..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""

#: standalone/harddrake2:243
#, c-format
msgid "Harddrake2"
msgstr "Harddrake2"

#: standalone/harddrake2:273
#, c-format
msgid "Detected hardware"
msgstr ""

#: standalone/harddrake2:278
#, c-format
msgid "Configure module"
msgstr ""

#: standalone/harddrake2:285
#, c-format
msgid "Run config tool"
msgstr ""

#: standalone/harddrake2:309
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:330 standalone/printerdrake:306
#: standalone/printerdrake:320
#, c-format
msgid "Unknown"
msgstr "Disconnotu"

#: standalone/harddrake2:350
#, c-format
msgid "Misc"
msgstr ""

#: standalone/harddrake2:428
#, c-format
msgid "secondary"
msgstr "segundàriu"

#: standalone/harddrake2:428
#, c-format
msgid "primary"
msgstr "primàriu"

#: standalone/harddrake2:432
#, c-format
msgid "burner"
msgstr "scriidori"

#: standalone/harddrake2:432
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:512
#, c-format
msgid ""
"The following devices needs proprietary drivers or firmwares in order to "
"operate smoothly. The appropriate packages can be retrieved from the "
"Mandriva Club. Do you want to subscribe to the Mandriva Club?"
msgstr ""

#: standalone/harddrake2:595 standalone/harddrake2:598
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:600
#, c-format
msgid "Account:"
msgstr "Account:"

#: standalone/harddrake2:602
#, c-format
msgid "Hostname:"
msgstr "Hostname:"

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "LocaleDrake"

#: standalone/localedrake:44
#, c-format
msgid "You should install the following packages: %s"
msgstr ""

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: standalone/localedrake:47 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: standalone/localedrake:55
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: standalone/logdrake:49
#, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "Mandriva Linux Tools Logs"

#: standalone/logdrake:50
#, c-format
msgid "Logdrake"
msgstr "Logdrake"

#: standalone/logdrake:63
#, c-format
msgid "Show only for the selected day"
msgstr ""

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr ""

#: standalone/logdrake:70
#, c-format
msgid "<control>N"
msgstr ""

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr ""

#: standalone/logdrake:71
#, c-format
msgid "<control>O"
msgstr ""

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr ""

#: standalone/logdrake:72
#, c-format
msgid "<control>S"
msgstr ""

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr ""

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/File/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr ""

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/Ajudu/_Apitzus de..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:115
#, c-format
msgid "search"
msgstr ""

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr ""

#: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93
#, c-format
msgid "Settings"
msgstr "Assètius"

#: standalone/logdrake:133
#, c-format
msgid "Matching"
msgstr ""

#: standalone/logdrake:134
#, c-format
msgid "but not matching"
msgstr ""

#: standalone/logdrake:138
#, c-format
msgid "Choose file"
msgstr "Sçobera file"

#: standalone/logdrake:150
#, c-format
msgid "Calendar"
msgstr "Calendàriu"

#: standalone/logdrake:160
#, c-format
msgid "Content of the file"
msgstr ""

#: standalone/logdrake:164 standalone/logdrake:401
#, c-format
msgid "Mail alert"
msgstr ""

#: standalone/logdrake:171
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr ""

#: standalone/logdrake:224
#, c-format
msgid "please wait, parsing file: %s"
msgstr ""

#: standalone/logdrake:379
#, c-format
msgid "Apache World Wide Web Server"
msgstr ""

#: standalone/logdrake:380
#, c-format
msgid "Domain Name Resolver"
msgstr ""

#: standalone/logdrake:381
#, c-format
msgid "Ftp Server"
msgstr "Server ftp"

#: standalone/logdrake:382
#, c-format
msgid "Postfix Mail Server"
msgstr "Server de curreu Postfix"

#: standalone/logdrake:383
#, c-format
msgid "Samba Server"
msgstr "Server Samba"

#: standalone/logdrake:385
#, c-format
msgid "Webmin Service"
msgstr "Serbìtziu Webmin"

#: standalone/logdrake:386
#, c-format
msgid "Xinetd Service"
msgstr "Serbìtziu Xinetd"

#: standalone/logdrake:395
#, c-format
msgid "Configure the mail alert system"
msgstr ""

#: standalone/logdrake:396
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:404
#, c-format
msgid "Mail alert configuration"
msgstr ""

#: standalone/logdrake:405
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""

#: standalone/logdrake:415
#, c-format
msgid "Services settings"
msgstr ""

#: standalone/logdrake:416
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:423
#, c-format
msgid "Load setting"
msgstr ""

#: standalone/logdrake:424
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: standalone/logdrake:425
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:430
#, c-format
msgid "Alert configuration"
msgstr ""

#: standalone/logdrake:431
#, c-format
msgid "Please enter your email address below "
msgstr ""

#: standalone/logdrake:432
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""

#: standalone/logdrake:451
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:457
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:516
#, c-format
msgid "Save as.."
msgstr "Sarva ke..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr ""

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr ""

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "Esàmini de su sòrixi"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "Esàmina su sòrixi:"

#: standalone/net_applet:47
#, c-format
msgid "Network is up on interface %s"
msgstr "S'arretza est alluta in s'interfaci %s"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "S'arretza est studada in s'interfaci %s. Crica in \"Assètia Arretza\""

#: standalone/net_applet:56 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Connect %s"
msgstr "Acàpia %s"

#: standalone/net_applet:57 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Disconnect %s"
msgstr "Disacàpia %s"

#: standalone/net_applet:58
#, c-format
msgid "Monitor Network"
msgstr "Controlla s'acàpiu"

#: standalone/net_applet:60
#, c-format
msgid "Manage wireless networks"
msgstr "Manija arretzas wireless"

#: standalone/net_applet:61
#, c-format
msgid "Configure Network"
msgstr "Assètia Arretza"

#: standalone/net_applet:63
#, c-format
msgid "Watched interface"
msgstr ""

#: standalone/net_applet:93
#, c-format
msgid "Profiles"
msgstr ""

#: standalone/net_applet:102
#, c-format
msgid "Get Online Help"
msgstr ""

#: standalone/net_applet:335
#, c-format
msgid "Interactive Firewall automatic mode"
msgstr ""

#: standalone/net_applet:340
#, c-format
msgid "Always launch on startup"
msgstr "Lança sempri a s'alluidura"

#: standalone/net_applet:344
#, c-format
msgid "Wireless networks"
msgstr "Arretzas wireless"

#: standalone/net_applet:429
#, c-format
msgid "Interactive Firewall: intrusion detected"
msgstr ""

#: standalone/net_applet:442
#, c-format
msgid "What do you want to do with this attacker?"
msgstr "Ita bolis fai cun custu afracadori?"

#: standalone/net_applet:445
#, c-format
msgid "Attack details"
msgstr ""

#: standalone/net_applet:449
#, c-format
msgid "Attack time: %s"
msgstr ""

#: standalone/net_applet:450
#, c-format
msgid "Network interface: %s"
msgstr ""

#: standalone/net_applet:451
#, c-format
msgid "Attack type: %s"
msgstr ""

#: standalone/net_applet:452
#, c-format
msgid "Protocol: %s"
msgstr ""

#: standalone/net_applet:453
#, c-format
msgid "Attacker IP address: %s"
msgstr ""

#: standalone/net_applet:454
#, c-format
msgid "Attacker hostname: %s"
msgstr ""

#: standalone/net_applet:457
#, c-format
msgid "Service attacked: %s"
msgstr ""

#: standalone/net_applet:458
#, c-format
msgid "Port attacked: %s"
msgstr ""

#: standalone/net_applet:460
#, c-format
msgid "Type of ICMP attack: %s"
msgstr ""

#: standalone/net_applet:465
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr ""

#: standalone/net_monitor:57 standalone/net_monitor:62
#, c-format
msgid "Network Monitoring"
msgstr ""

#: standalone/net_monitor:98
#, c-format
msgid "Global statistics"
msgstr ""

#: standalone/net_monitor:101
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:101
#, c-format
msgid "Average"
msgstr "Mèdia"

#: standalone/net_monitor:102
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""

#: standalone/net_monitor:103
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""

#: standalone/net_monitor:107
#, c-format
msgid ""
"Connection\n"
"time: "
msgstr ""
"Acàpiu\n"
"tempus: "

#: standalone/net_monitor:114
#, c-format
msgid "Use same scale for received and transmitted"
msgstr ""

#: standalone/net_monitor:133
#, c-format
msgid "Wait please, testing your connection..."
msgstr ""

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Disconnecting from Internet "
msgstr "Mi disacàpiu de s'Arretza"

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Connecting to Internet "
msgstr "Mi acàpiu a s'Arretza"

#: standalone/net_monitor:226
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Disacàpiu de s'Arretza faddiu."

#: standalone/net_monitor:227
#, c-format
msgid "Disconnection from Internet complete."
msgstr "Disacàpiu de s'Arretza fatu."

#: standalone/net_monitor:229
#, c-format
msgid "Connection complete."
msgstr "Acàpiu fatu."

#: standalone/net_monitor:230
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandriva Linux Control Center."
msgstr ""
"Acàpiu faddiu.\n"
"Aberiga s'assètiu in su Mandriva Linux Control Center."

#: standalone/net_monitor:335
#, c-format
msgid "Color configuration"
msgstr "Assètiu de su colori"

#: standalone/net_monitor:383 standalone/net_monitor:403
#, c-format
msgid "sent: "
msgstr "mandau:"

#: standalone/net_monitor:390 standalone/net_monitor:407
#, c-format
msgid "received: "
msgstr "arriciu:"

#: standalone/net_monitor:397
#, c-format
msgid "average"
msgstr "mèdia"

#: standalone/net_monitor:400
#, c-format
msgid "Local measure"
msgstr ""

#: standalone/net_monitor:461
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/net_monitor:472
#, c-format
msgid "No internet connection configured"
msgstr "Nisçunu acàpiu a s'Arretza assetiau"

#: standalone/printerdrake:76
#, c-format
msgid "Reading data of installed printers..."
msgstr ""

#: standalone/printerdrake:128
#, c-format
msgid "%s Printer Management Tool"
msgstr ""

#: standalone/printerdrake:142 standalone/printerdrake:143
#: standalone/printerdrake:144 standalone/printerdrake:145
#: standalone/printerdrake:153 standalone/printerdrake:154
#: standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/At_zionis"

#: standalone/printerdrake:142 standalone/printerdrake:154
#, c-format
msgid "/_Add Printer"
msgstr ""

#: standalone/printerdrake:143
#, c-format
msgid "/Set as _Default"
msgstr ""

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/_Muda"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/_Burra"

#: standalone/printerdrake:146
#, c-format
msgid "/_Expert mode"
msgstr ""

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/A_rrecasça"

#: standalone/printerdrake:158
#, c-format
msgid "/_Configure CUPS"
msgstr ""

#: standalone/printerdrake:171
#, c-format
msgid "/Configure _Auto Administration"
msgstr "/Assètia Aministradura _Automàtiga"

#: standalone/printerdrake:194
#, c-format
msgid "Search:"
msgstr "Circa:"

#: standalone/printerdrake:197
#, c-format
msgid "Apply filter"
msgstr "Àpriga ciliru"

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Def."
msgstr "Def."

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Printer Name"
msgstr "Nòmini de s'Imprentadora"

#: standalone/printerdrake:224
#, c-format
msgid "Connection Type"
msgstr "Tipu de acàpiu"

#: standalone/printerdrake:231
#, c-format
msgid "Server Name"
msgstr "Nòmini de su server"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:239
#, c-format
msgid "Add Printer"
msgstr "Açungi computadoras"

#: standalone/printerdrake:239
#, c-format
msgid "Add a new printer to the system"
msgstr "Açungi una imprentadora in su sistema"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, c-format
msgid "Set as default"
msgstr "Poni a predefinia"

#: standalone/printerdrake:242
#, c-format
msgid "Set selected printer as the default printer"
msgstr "Poni s'imprentadora sçoberada a predefinia"

#: standalone/printerdrake:245
#, c-format
msgid "Edit selected printer"
msgstr "Muda s'imprentadora sçoberada"

#: standalone/printerdrake:248
#, c-format
msgid "Delete selected printer"
msgstr "Burra s'imprentadora sçoberada"

#: standalone/printerdrake:251
#, c-format
msgid "Refresh the list"
msgstr "Arrecasça sa lista"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS"
msgstr "Assètia CUPS"

#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS printing system"
msgstr "Assètia su sistema de imprenta CUPS"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Enabled"
msgstr "Abivau"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Disabled"
msgstr "Disabivau"

#: standalone/printerdrake:596
#, c-format
msgid "Authors: "
msgstr "Autoris: "

#. -PO: here %s is the version number
#: standalone/printerdrake:606
#, c-format
msgid "Printer Management %s"
msgstr ""

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"Is pakitus de SANE bolint aposentaus po impreai scannidoras.\n"
"\n"
"Bolis aposentai is pakitus de SANE?"

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr "Bessu de Scannerdrake."

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "Imoi apu a allui Scannerdrake."

#: standalone/scannerdrake:67 standalone/scannerdrake:508
#, c-format
msgid "Searching for configured scanners..."
msgstr "Circu is scannidoras assetiadas..."

#: standalone/scannerdrake:71 standalone/scannerdrake:512
#, c-format
msgid "Searching for new scanners..."
msgstr "Circu atras scannidoras..."

#: standalone/scannerdrake:79 standalone/scannerdrake:534
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr ""

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr ""

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr ""

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "Sçobera unu modellu de scannidora"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "Modellu agatau: %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "Porta: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr " (NO SUPORTADA)"

#: standalone/scannerdrake:144
#, c-format
msgid "The %s is not supported under Linux."
msgstr "Sa %s no est suportada in Linux."

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr "No aposentist su file de firmware"

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:200
#, c-format
msgid "Select firmware file"
msgstr ""

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:258
#, c-format
msgid "Select firmware file for the %s"
msgstr ""

#: standalone/scannerdrake:276
#, c-format
msgid "Could not install the firmware file for the %s!"
msgstr ""

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr "Su %s no est suportau"

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""

#: standalone/scannerdrake:322
#, c-format
msgid "Setting up kernel modules..."
msgstr "Assètiu is mòdulus de su kernel..."

#: standalone/scannerdrake:332 standalone/scannerdrake:339
#: standalone/scannerdrake:369
#, c-format
msgid "Auto-detect available ports"
msgstr ""

#: standalone/scannerdrake:334 standalone/scannerdrake:380
#, c-format
msgid "Please select the device where your %s is attached"
msgstr ""

#: standalone/scannerdrake:335
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""

#: standalone/scannerdrake:337 standalone/scannerdrake:382
#, c-format
msgid "choose device"
msgstr "sçobera trastu"

#: standalone/scannerdrake:371
#, c-format
msgid "Searching for scanners..."
msgstr "Circu scannidoras..."

#: standalone/scannerdrake:407 standalone/scannerdrake:414
#, c-format
msgid "Attention!"
msgstr "Atentu!"

#: standalone/scannerdrake:408
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:409 standalone/scannerdrake:418
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""

#: standalone/scannerdrake:411 standalone/scannerdrake:420
#, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:415
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""

#: standalone/scannerdrake:416
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""

#: standalone/scannerdrake:417
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr "muda su file de assètiu /etc/sane.d/%s.conf. "

#: standalone/scannerdrake:423
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"Su %s est assetiau.\n"
"Imoi podis scanniri dogumentus cun \"XSane\" o \"Kooka\" de Multimèdia/"
"Gràfiga in sa lista de is programas."

#: standalone/scannerdrake:448
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Custas scannidoras\n"
"\n"
"%s\n"
"funt a disposta in su sistema.\n"

#: standalone/scannerdrake:449
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Custa scannidora\n"
"\n"
"%s\n"
"est a disposta in su sistema.\n"

#: standalone/scannerdrake:452 standalone/scannerdrake:455
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "No apu agatau scannidoras a disposta in su sistema.\n"

#: standalone/scannerdrake:469
#, c-format
msgid "Search for new scanners"
msgstr "Circa atras scannidoras"

#: standalone/scannerdrake:475
#, c-format
msgid "Add a scanner manually"
msgstr "Açungi a manu una scannidora"

#: standalone/scannerdrake:482
#, c-format
msgid "Install/Update firmware files"
msgstr "Aposenta/Ajorrona is file de firmware"

#: standalone/scannerdrake:488
#, c-format
msgid "Scanner sharing"
msgstr "Scannidora a cumoni"

#: standalone/scannerdrake:547 standalone/scannerdrake:712
#, c-format
msgid "All remote machines"
msgstr "Totu is màkinas in atesu"

#: standalone/scannerdrake:559 standalone/scannerdrake:862
#, c-format
msgid "This machine"
msgstr "Custa màkina"

#: standalone/scannerdrake:599
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:600
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: standalone/scannerdrake:603
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Is scannidoras de custa màkinas das podint impreai atras màkinas"

#: standalone/scannerdrake:605
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Scannidora a cumoni cun is host:"

#: standalone/scannerdrake:619
#, c-format
msgid "Use scanners on remote computers"
msgstr "Imprea sa scannidora in computadoras in atesu"

#: standalone/scannerdrake:622
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Imprea sa scannidora in is host:"

#: standalone/scannerdrake:649 standalone/scannerdrake:721
#: standalone/scannerdrake:871
#, c-format
msgid "Sharing of local scanners"
msgstr "Cumoni de scannidoras innoi"

#: standalone/scannerdrake:650
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:661 standalone/scannerdrake:811
#, c-format
msgid "Add host"
msgstr "Açungi host"

#: standalone/scannerdrake:667 standalone/scannerdrake:817
#, c-format
msgid "Edit selected host"
msgstr "Muda s'host sçoberau"

#: standalone/scannerdrake:676 standalone/scannerdrake:826
#, c-format
msgid "Remove selected host"
msgstr "Burra s'host sçoberau"

#: standalone/scannerdrake:700 standalone/scannerdrake:708
#: standalone/scannerdrake:713 standalone/scannerdrake:759
#: standalone/scannerdrake:850 standalone/scannerdrake:858
#: standalone/scannerdrake:863 standalone/scannerdrake:909
#, c-format
msgid "Name/IP address of host:"
msgstr "Nòmini/bivimentu IP de s'host:"

#: standalone/scannerdrake:722 standalone/scannerdrake:872
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:733 standalone/scannerdrake:883
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Depis intrai unu nòmini host o unu bivimentu IP.\n"

#: standalone/scannerdrake:744 standalone/scannerdrake:894
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Custu host est jai in sa lista, no fait a d'açungi torra.\n"

#: standalone/scannerdrake:799
#, c-format
msgid "Usage of remote scanners"
msgstr "Impreu de scannidoras foranas"

#: standalone/scannerdrake:800
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Custas funt is màkinas de anca podis impreai is scannidoras:"

#: standalone/scannerdrake:957
#, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"saned bolit aposentau po acumonai is scannidoras localis.\n"
"\n"
"Bolis aposentai su pakitu saned?"

#: standalone/scannerdrake:961 standalone/scannerdrake:965
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "As a podi impreai sa(is) sscannidora(s) in arretza."

#: standalone/service_harddrake:105
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: standalone/service_harddrake:106
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:109
#, c-format
msgid "Some devices were added: %s\n"
msgstr ""

#: standalone/service_harddrake:110
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:209
#, c-format
msgid "Hardware probing in progress"
msgstr "Seu provendi s'hardware"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr ""

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Lìngua"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Permissu"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Assètia sòrixi"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Controllu de su discu tostau"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Sçobera tipu de aposentadura"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Sçobera su tecrau"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Formata pratziduras"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Sçobera pakitus de aposentai"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Aposenta su sistema"

#: steps.pm:25
#, c-format
msgid "Administrator password"
msgstr "Password de Aministradori"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Açungi umperadoris"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Assètia s'arretza"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Aposenta su bootloader"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Assètia X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Assètia serbìtzius"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Aposenta is ajorronus"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Bessi de s'aposentadura"

#: ugtk2.pm:899
#, c-format
msgid "Is this correct?"
msgstr "Andat beni?"

#: ugtk2.pm:959
#, c-format
msgid "No file chosen"
msgstr "Nisçunu file sçoberau"

#: ugtk2.pm:961
#, c-format
msgid "You have chosen a file, not a directory"
msgstr "As sçoberau unu file, no una directory"

#: ugtk2.pm:963
#, c-format
msgid "You have chosen a directory, not a file"
msgstr "As sçoberau una directory, no unu file"

#: ugtk2.pm:965
#, c-format
msgid "No such directory"
msgstr "Nisçuna directory de aici"

#: ugtk2.pm:965
#, c-format
msgid "No such file"
msgstr "Nisçunu file de aici"

#: ugtk2.pm:1046
#, c-format
msgid "Expand Tree"
msgstr "Allàdia s'arrampili"

#: ugtk2.pm:1047
#, c-format
msgid "Collapse Tree"
msgstr "Serra s'arrampili"

#: ugtk2.pm:1048
#, c-format
msgid "Toggle between flat and group sorted"
msgstr ""

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s no est aposentau\n"
"Crica \"Sighi\" po aposentai o \"Annudda\" po bessiri"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "Aposentadura faddia"

#, fuzzy
#~ msgid "Cancel setup"
#~ msgstr "Annudda"

#~ msgid "Create PXE images."
#~ msgstr "Crea màginis PXE."

#~ msgid "HPOJ"
#~ msgstr "HPOJ"

#~ msgid "http://www.mandrivalinux.com/en/errata.php3"
#~ msgstr "http://www.mandrivalinux.com/en/errata.php3"