# Translation file of Mandrakelinux graphic install
# Copyright (c) 2000 Mandrakesoft
# Florin Grad <florin@mandrakesoft.com>, 1999-2000
# Dragos Marian Barbu <dragosb@softhome.net>, 2000
# Ovidiu Constantin <ovidiu.constantin@gmx.net>, 2002, 2003
# Harald Ersch <harald@ersch.ro>,2003
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX 7.1\n"
"POT-Creation-Date: 2005-02-24 14:10+0100\n"
"PO-Revision-Date: 2003-09-11 18:11+0200\n"
"Last-Translator: Ovidiu Constantin <ovidiu.constantin@gmx.net>\n"
"Language-Team: Romanian Translators for Free Software <rtfs-project@lists."
"sourceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Ce tip de intrări doriţi să adăugaţi ?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""

#: ../move/move.pm:448 ../move/move.pm:460
#, fuzzy, c-format
msgid "Key is not writable"
msgstr "XawTV nu este instalat!"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Reîncearcă"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317
#, c-format
msgid "Reboot"
msgstr "Repornire sistem"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Vă rog să aşteptaţi, configurez nivelul de securitate..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Configurare personalizată"

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Vă rog să aşteptaţi, configurez nivelul de securitate..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393
#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541
#: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183
#: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:1037
#: network/netconnect.pm:1041 network/netconnect.pm:1046
#: network/netconnect.pm:1072 network/netconnect.pm:1141
#: network/netconnect.pm:1145 network/netconnect.pm:1283
#: network/netconnect.pm:1288 network/netconnect.pm:1306
#: network/netconnect.pm:1491 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:635
#: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335
#: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416
#: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434
#: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605
#: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613
#: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719
#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737
#: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852
#: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957
#: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984
#: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949
#: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501
#: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509
#: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205
#: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483
#: standalone/drakTermServ:392 standalone/drakTermServ:753
#: standalone/drakTermServ:760 standalone/drakTermServ:779
#: standalone/drakTermServ:998 standalone/drakTermServ:1478
#: standalone/drakTermServ:1483 standalone/drakTermServ:1490
#: standalone/drakTermServ:1502 standalone/drakTermServ:1523
#: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1127 standalone/drakbackup:1160
#: standalone/drakbackup:1671 standalone/drakbackup:1827
#: standalone/drakbackup:2421 standalone/drakbackup:4110
#: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124
#: standalone/drakconnect:649 standalone/drakconnect:652
#: standalone/drakconnect:671 standalone/drakfloppy:297
#: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209
#: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604
#: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107
#: standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Eroare"

#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"A apărut o eroare pe care nu ştiu să o interpretez în mod corect.\n"
"Continuaţi pe riscul dumneavoastră."

#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "A apărut o eroare"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Doriţi ştergerea fişierului loopback?"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "acces la programele X"

#: ../move/tree/mdk_totem:72
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Sprijin radio:"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Read carefully!"
msgstr "Citiţi cu atenţie!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB sau mai mult"

#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "Server X"

#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "Alegeţi un server X"

#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr "Configurare multi-head (ieşiri multiple)"

#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Sistemul dvs. permite configurarea mai multor ieşiri de afişare.\n"
"Ce doriţi să faceţi?"

#: Xconfig/card.pm:262
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "Instalarea pachetului  %s"

#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Alegeţi memoria pentru placa grafică"

#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Configurare Xorg"

#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Ce tip de configurare doriţi să aveţi pt. Xorg?"

#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr "Configurează toate capetele (ieşirile) independent"

#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "Foloseşte extensia Xinerama"

#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configurează numai placa \"%s\"%s"

#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s cu accelerare 3D hardware"

#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
"Placa dvs. poate avea suport pentru accelerarea 3D hardware cu Xorg %s."

#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s cu accelerare 3D hardware EXPERIMENTALĂ"

#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Placa dvs. poate avea suport pentru accelerarea 3D hardware cu Xorg %s, \n"
"ACEST SUPORT ESTE EXPERIMENTAL ŞI POATE BLOCA SISTEMUL DVS."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914
#, c-format
msgid "Custom"
msgstr "Personalizat"

#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:737
#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742
#: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Terminare"

#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Placă grafică"

#: Xconfig/main.pm:120 Xconfig/monitor.pm:111
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221
#, c-format
msgid "Resolution"
msgstr "Rezoluţie"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Test"

#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:493 standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Opţiuni"

#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""

#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Păstrez modificările?\n"
"Configuraţia curentă este:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:112
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "Alegeţi un  monitor"

#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor"
msgstr "Alegeţi un  monitor"

#: Xconfig/monitor.pm:118
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:119 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Comun"

#: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52
#: standalone/harddrake2:86
#, c-format
msgid "Vendor"
msgstr "Vânzător"

#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Sondarea Plug'n'Play a eşuat. Vă rog să precizaţi un monitor"

#: Xconfig/monitor.pm:135
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Cei doi parametri critici sunt rata de actualizare verticală, care este "
"rata\n"
"la care întregul ecran e actualizat şi mai important rata de sincronizare\n"
"orizontală, care este rata la care liniile de scan sunt afişate.\n"
"Este FOARTE IMPORTANT să nu specificaţi un tip de monitor cu interval de\n"
"sincronizare care depăşeşte capabilităţile monitorului vostru: puteţi\n"
"distruge monitorul în acest fel.\n"
"Dacă nu sunteţi sigur, alegeţi parametri conservativi."

#: Xconfig/monitor.pm:142
#, c-format
msgid "Horizontal refresh rate"
msgstr "Rata de actualizare orizontală"

#: Xconfig/monitor.pm:143
#, c-format
msgid "Vertical refresh rate"
msgstr "Rata de actualizare verticală"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 de culori (8 biţi)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mii de culori (15 biţi)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mii de culori (16 biţi)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 milioane de culori (24 biţi)"

#: Xconfig/resolution_and_depth.pm:133
#, c-format
msgid "Resolutions"
msgstr "Rezoluţii"

#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Alegeţi rezoluţia şi adâncimea de culoare"

#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "Placă grafică: %s"

#: Xconfig/resolution_and_depth.pm:285 interactive.pm:424
#: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:490
#: standalone/drakbackup:3967 standalone/drakbackup:4027
#: standalone/drakbackup:4071 standalone/drakconnect:165
#: standalone/drakconnect:849 standalone/drakconnect:936
#: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506
#: ugtk2.pm:900 ugtk2.pm:923
#, c-format
msgid "Ok"
msgstr "OK"

#: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3579
#: standalone/drakautoinst:217 standalone/drakbackup:3893
#: standalone/drakbackup:3897 standalone/drakbackup:3955
#: standalone/drakconnect:164 standalone/drakconnect:934
#: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343
#: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900
#, c-format
msgid "Cancel"
msgstr "Renunţă"

#: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519
#: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284
#: standalone/drakbackup:3889 standalone/drakbug:104
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Ajutor"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Test de configuraţie"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Doriţi să testaţi configuraţia ?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Atenţie: testul plăcii grafice poate bloca sistemul dvs."

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"A apărut o eroare:\n"
"%s\n"
"Încercaţi să schimbaţi câţiva parametri"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "terminare în %d secunde"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Configuraţia este corectă?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatura: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tip de mouse: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Dispozitiv mouse: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frecvenţa orizontală pentru monitor: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Frecvenţa verticală pentru monitor: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Placă grafică: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memorie grafică: %s KB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Adâncime de culoare: %s:\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Rezoluţie: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Driver Xorg: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Interfaţa grafică la demaraj"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Pot să configurez calculatorul sa demareze automat X la demaraj.\n"
"Doriţi sa demaraţi X cînd redemaraţi ?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Placa dvs. grafică pare a avea un conector TV-OUT.\n"
"Acesta poate fi configurat folosind frame-buffer-ul.\n"
"\n"
"Pentru aceasta trebuie să conectaţi placa grafică la un TV înainte de a "
"demara calculatorul dvs.\n"
"Atunci alegeţi intrarea \"TVout\" în gestionarul de demarare\n"
"\n"
"Cartela grafică are facilitatea TV-OUT?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Ce normă foloseşte TV-ul dumneavoastră?"

#: Xconfig/xfree.pm:571
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462
#: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231
#: standalone/service_harddrake:204
#, c-format
msgid "Please wait"
msgstr "Vă rog să aşteptaţi"

#: any.pm:140
#, c-format
msgid "Bootloader installation in progress"
msgstr "Se instalează gestionarul de demarare"

#: any.pm:151
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:162
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
"Instalarea gestionarului de demaraj a eşuat. A apărut următoarea eroare :"

#: any.pm:168
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:206
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Aţi decis să instalaţi gestionarul de demarare într-o partiţie.\n"
"Aceasta înseamă că aveţi instalat deja un gestionar de demarare pe unitatea "
"de disc de pe care demaraţi (ex. System Commander).\n"
"\n"
"De pe ce unitate de disc demaraţi?"

#: any.pm:229 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Primul sector al discului (MBR)"

#: any.pm:230
#, c-format
msgid "First sector of the root partition"
msgstr "Primul sector al partiţiei root"

#: any.pm:232
#, c-format
msgid "On Floppy"
msgstr "Pe dischetă"

#: any.pm:234 help.pm:739 printer/printerdrake.pm:3962
#, c-format
msgid "Skip"
msgstr "Sari peste"

#: any.pm:238
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalare LILO/grub"

#: any.pm:239
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Unde doriţi să instalaţi Gestionarul de demaraj ?"

#: any.pm:264 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "Configurare stil demarare"

#: any.pm:266 any.pm:298
#, c-format
msgid "Bootloader main options"
msgstr "Opţiunile principale ale gestionarului de demaraj"

#: any.pm:270
#, c-format
msgid "Give the ram size in MB"
msgstr "Introduceţi cantintatea de RAM în MB"

#: any.pm:272
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opţiunea ``Limitează opţiunile liniei de comandă'' e inutilă fără parolă"

#: any.pm:273 any.pm:606 authentication.pm:176
#, c-format
msgid "The passwords do not match"
msgstr "Parolele nu sunt identice"

#: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270
#, c-format
msgid "Please try again"
msgstr "Încercaţi din nou"

#: any.pm:278 any.pm:301
#, c-format
msgid "Bootloader to use"
msgstr "Gestionarul de demarare folosit"

#: any.pm:280 any.pm:303
#, c-format
msgid "Boot device"
msgstr "Periferic de demaraj"

#: any.pm:282
#, c-format
msgid "Delay before booting default image"
msgstr "Timp de aşteptare înaintea demarării imaginii standard"

#: any.pm:283
#, c-format
msgid "Enable ACPI"
msgstr "Activează ACPI"

#: any.pm:285
#, fuzzy, c-format
msgid "Force no APIC"
msgstr "Forţează nefolosirea APIC"

#: any.pm:287
#, fuzzy, c-format
msgid "Force No Local APIC"
msgstr "Forţează nefolosirea APIC"

#: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:633 printer/printerdrake.pm:1596
#: printer/printerdrake.pm:1716 standalone/drakbackup:1653
#: standalone/drakbackup:3495 standalone/drakups:295
#, c-format
msgid "Password"
msgstr "Parola"

#: any.pm:290 any.pm:634 authentication.pm:182
#, c-format
msgid "Password (again)"
msgstr "Parola (din nou)"

#: any.pm:291
#, c-format
msgid "Restrict command line options"
msgstr "Limitează opţiunile liniei de comandă"

#: any.pm:291
#, c-format
msgid "restrict"
msgstr "limitează"

#: any.pm:293
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Curăţă /tmp la fiecare demaraj"

#: any.pm:294
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Precizează cantintatea de  RAM dacă e necesar (am găsit %d MB)"

#: any.pm:302
#, c-format
msgid "Init Message"
msgstr "Mesaj de iniţializare"

#: any.pm:304
#, c-format
msgid "Open Firmware Delay"
msgstr "Întârziere Open Firmware"

#: any.pm:305
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Timp expirat demarare nucleu"

#: any.pm:306
#, c-format
msgid "Enable CD Boot?"
msgstr "Demarare de pe CD activă?"

#: any.pm:307
#, c-format
msgid "Enable OF Boot?"
msgstr "Demarare OF activă?"

#: any.pm:308
#, c-format
msgid "Default OS?"
msgstr "Sistem de operare implicit?"

#: any.pm:361
#, c-format
msgid "Image"
msgstr "Imagine"

#: any.pm:362 any.pm:372
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:363 any.pm:385
#, c-format
msgid "Append"
msgstr "Adaugă"

#: any.pm:365 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "Mod video"

#: any.pm:367
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:368
#, fuzzy, c-format
msgid "Network profile"
msgstr "Profil nou..."

#: any.pm:377 any.pm:382 any.pm:384
#, c-format
msgid "Label"
msgstr "Etichetă"

#: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Standard"

#: any.pm:386
#, c-format
msgid "Initrd-size"
msgstr "Dimensiune Initrd"

#: any.pm:388
#, c-format
msgid "NoVideo"
msgstr "Fără imagine video"

#: any.pm:399
#, c-format
msgid "Empty label not allowed"
msgstr "Eticheta goală nu e permisă"

#: any.pm:400
#, c-format
msgid "You must specify a kernel image"
msgstr "Trebuie să specificaţi o imagine nucleu"

#: any.pm:400
#, c-format
msgid "You must specify a root partition"
msgstr "Trebuie să specificaţi o partiţie rădăcină (root)"

#: any.pm:401
#, c-format
msgid "This label is already used"
msgstr "Această etichetă nu e permisă"

#: any.pm:415
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Ce tip de intrări doriţi să adăugaţi ?"

#: any.pm:416
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:416
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Alt SO (SunOS...)"

#: any.pm:417
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Alt SO (MacOS...)"

#: any.pm:417
#, c-format
msgid "Other OS (Windows...)"
msgstr "Alt SO (Windows...)"

#: any.pm:445
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Acestea sunt diferitele intrările.\n"
"Puteţi să mai adăugaţi şi altele sau să schimbaţi cele existente."

#: any.pm:592
#, c-format
msgid "access to X programs"
msgstr "acces la programele X"

#: any.pm:593
#, c-format
msgid "access to rpm tools"
msgstr "acces la uneltele rpm"

#: any.pm:594
#, c-format
msgid "allow \"su\""
msgstr "permite \"su\""

#: any.pm:595
#, c-format
msgid "access to administrative files"
msgstr "acces la fişierele administrative"

#: any.pm:596
#, c-format
msgid "access to network tools"
msgstr "acces la uneltele de reţea"

#: any.pm:597
#, c-format
msgid "access to compilation tools"
msgstr "acces la uneltele de compilare"

#: any.pm:602
#, c-format
msgid "(already added %s)"
msgstr "(deja adăugat %s)"

#: any.pm:607
#, c-format
msgid "This password is too simple"
msgstr "Aceasta parolă e prea simplă"

#: any.pm:608
#, c-format
msgid "Please give a user name"
msgstr "Va rog înscrieţi numele utilizatorului"

#: any.pm:609
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Numele utilizatorului trebuie sa conţină numai caractere minuscule, numere, "
"`-' şi `_'"

#: any.pm:610
#, c-format
msgid "The user name is too long"
msgstr "Numele de utilizator este prea lung"

#: any.pm:611
#, c-format
msgid "This user name has already been added"
msgstr "Acest nume de utilizator e deja adăugat"

#: any.pm:615
#, c-format
msgid "Add user"
msgstr "Adăugaţi un utilizator"

#: any.pm:616
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Introduceţi un utilizator\n"
"%s"

#: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:191
#: printer/printerdrake.pm:376 printer/printerdrake.pm:4742
#: standalone/drakbackup:2708 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Gata"

#: any.pm:620 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Acceptare utilizator"

#: any.pm:631
#, c-format
msgid "Real name"
msgstr "Nume real"

#: any.pm:632 standalone/drakbackup:1648
#, c-format
msgid "Login name"
msgstr "Nume login"

#: any.pm:635
#, c-format
msgid "Shell"
msgstr "Interpretor"

#: any.pm:637
#, c-format
msgid "Icon"
msgstr "Icon"

#: any.pm:684 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologare"

#: any.pm:685
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Pot să configurez calculatorul să facă logare automată pt. un utilizator."

#: any.pm:686 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Vreţi să folosiţi această facilitate?"

#: any.pm:687
#, c-format
msgid "Choose the default user:"
msgstr "Alegeţi utilizatorul implicit:"

#: any.pm:688
#, c-format
msgid "Choose the window manager to run:"
msgstr "Alegeţi managerul de ferestre:"

#: any.pm:700
#, c-format
msgid "Please choose a language to use."
msgstr "Vă rog să alegeţi limba folosită."

#: any.pm:701
#, fuzzy, c-format
msgid "Language choice"
msgstr "Myanmar"

#: any.pm:727
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrakelinux permite folosirea mai multor limbi.\n"
"Selectaţi limbile pe care doriţi să le instalaţi. Ele vor fi disponibile\n"
"după terminarea instalării şi repornirea sistemului."

#: any.pm:746 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Foloseşte implicit Unicode "

#: any.pm:747 help.pm:647
#, c-format
msgid "All languages"
msgstr "Toate limbile"

#: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946
#, c-format
msgid "Country / Region"
msgstr "Ţara"

#: any.pm:787
#, c-format
msgid "Please choose your country."
msgstr "Vă rog să alegeţi ţara"

#: any.pm:789
#, c-format
msgid "Here is the full list of available countries"
msgstr "Aici este lista tuturor ţărilor disponibile"

#: any.pm:790
#, fuzzy, c-format
msgid "Other Countries"
msgstr "Alte porturi"

#: any.pm:798
#, c-format
msgid "Input method:"
msgstr ""

#: any.pm:799 install_any.pm:388 network/netconnect.pm:323
#: network/netconnect.pm:328 printer/printerdrake.pm:99
#: printer/printerdrake.pm:2111
#, c-format
msgid "None"
msgstr "Nimic"

#: any.pm:914
#, c-format
msgid "No sharing"
msgstr "Fără partajare"

#: any.pm:914
#, c-format
msgid "Allow all users"
msgstr "Permite tuturor utilizatorilor"

#: any.pm:918
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Doriţi să permiteţi utilizatorilor să partajeze directoare din directorul "
"lor acasă?\n"
"Aceasta va permite utilizatorilor sa facă un click pe \"Share\" în konqueror "
"şi nautilus.\n"
"\n"
"\"Personalizat\" permite configurarea per utilizator.\n"

#: any.pm:930
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:933
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:941
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Puteţi exporta fişiere folosind sistemul NFS sau SMB. Pe care îl alegeţi?"

#: any.pm:966
#, c-format
msgid "Launch userdrake"
msgstr "Lansează userdrake"

#: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805
#: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807
#: printer/printerdrake.pm:5036 standalone/drakTermServ:294
#: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakfont:595 standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "Închide"

#: any.pm:968
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Partajarea per-utilizator foloseşte grupul \"fileshare\".\n"
"Puteţi folosi userdrake pentru adăuga un utilizator la acest grup."

#: authentication.pm:16
#, c-format
msgid "Local file"
msgstr "Fişier local"

#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:19
#, fuzzy, c-format
msgid "Smart Card"
msgstr "Placă Ethernet"

#: authentication.pm:20 authentication.pm:148
#, c-format
msgid "Windows Domain"
msgstr "Domeniu Windows"

#: authentication.pm:21
#, c-format
msgid "Active Directory with SFU"
msgstr ""

#: authentication.pm:22
#, c-format
msgid "Active Directory with Winbind"
msgstr ""

#: authentication.pm:51
#, fuzzy, c-format
msgid "Local file:"
msgstr "Fişiere locale:"

#: authentication.pm:51
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:52
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:52
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:53
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:53
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:54
#, c-format
msgid "Windows Domain:"
msgstr "Domeniu Windows:"

#: authentication.pm:54
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""

#: authentication.pm:55
#, c-format
msgid "Active Directory with SFU:"
msgstr ""

#: authentication.pm:55 authentication.pm:56
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""

#: authentication.pm:56
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""

#: authentication.pm:81
#, c-format
msgid "Authentication LDAP"
msgstr "Autentificare prin LDAP"

#: authentication.pm:82
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:83 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "Server LDAP"

#: authentication.pm:96 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "simplu"

#: authentication.pm:97
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:98
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:99
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""

#: authentication.pm:106 authentication.pm:144
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "autentificare"

#: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domeniu"

#: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:135 share/compssUsers.pl:81
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Server"

#: authentication.pm:110
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "Baze de date"

#: authentication.pm:111
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:112
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:113
#, fuzzy, c-format
msgid "Password for user"
msgstr "Parolă necesară"

#: authentication.pm:114
#, c-format
msgid "Encryption"
msgstr "Criptare"

#: authentication.pm:125
#, c-format
msgid "Authentication NIS"
msgstr "Autentificare NIS"

#: authentication.pm:126
#, c-format
msgid "NIS Domain"
msgstr "Domeniu NIS"

#: authentication.pm:127
#, c-format
msgid "NIS Server"
msgstr "Server NIS"

#: authentication.pm:132
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:144
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentificare în domeniu Windows"

#: authentication.pm:149
#, c-format
msgid "Domain Admin User Name"
msgstr ""

#: authentication.pm:150
#, c-format
msgid "Domain Admin Password"
msgstr ""

#: authentication.pm:151
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""

#: authentication.pm:152
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Mediu implicit"

#: authentication.pm:165
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""

#: authentication.pm:166
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "Alegeţi parola pentru root"

#: authentication.pm:167 standalone/drakvpn:1125
#, fuzzy, c-format
msgid "Authentication method"
msgstr "autentificare"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:172 help.pm:722
#, c-format
msgid "No password"
msgstr "Nici o parolă"

#: authentication.pm:178
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Această parolă e prea simplă (ar trebui să fie de cel puţin %d caractere)"

#: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634
#: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459
#, c-format
msgid "Authentication"
msgstr "Autentificare"

#: authentication.pm:296
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Nu pot să folosesc difuziunea fără nici un domeniu NIS"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:728
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Bun venit la gestionarul de sisteme de operare!\n"
"\n"
"Alegeti un sistem de operare din lista de mai sus sau\n"
"asteptati pentru demararea din oficiu.\n"
"\n"

#: bootloader.pm:815
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO cu meniu grafic"

#: bootloader.pm:816
#, c-format
msgid "LILO with text menu"
msgstr "LILO cu meniu text"

#: bootloader.pm:817
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:818
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:881
#, c-format
msgid "not enough room in /boot"
msgstr "nu e destul spaţiu în /boot"

#: bootloader.pm:1295
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Nu puteţi instala Gestionarul de demarare într-o partiţie %s\n"

#: bootloader.pm:1340
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1355
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1356
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Instalare gestionar de demaraj"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d minute"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 minut"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d secunde"

#: common.pm:240
#, c-format
msgid "kdesu missing"
msgstr "lipseşte kdesu"

#: common.pm:243
#, c-format
msgid "consolehelper missing"
msgstr "lipseşte ajutorul de consolă"

#: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50
#: network/adsl_consts.pm:58 network/adsl_consts.pm:66
#, c-format
msgid "Austria"
msgstr "Austria"

#: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74
#: network/adsl_consts.pm:82 network/adsl_consts.pm:93
#: network/adsl_consts.pm:101 network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "Belgia"

#: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780
#: network/adsl_consts.pm:788 network/adsl_consts.pm:798
#, c-format
msgid "Switzerland"
msgstr "Elveţia"

#: crypto.pm:17 lang.pm:237
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319
#, c-format
msgid "Czech Republic"
msgstr "Republica Cehă"

#: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437
#: network/adsl_consts.pm:445
#, c-format
msgid "Germany"
msgstr "Germania"

#: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343
#: network/adsl_consts.pm:354 network/adsl_consts.pm:365
#: network/adsl_consts.pm:375 network/adsl_consts.pm:385
#: network/adsl_consts.pm:396 network/adsl_consts.pm:407
#: network/adsl_consts.pm:417 network/adsl_consts.pm:427
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "Franţa"

#: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455
#, c-format
msgid "Greece"
msgstr "Grecia"

#: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463
#, c-format
msgid "Hungary"
msgstr "Ungaria"

#: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489
#: network/adsl_consts.pm:499 network/adsl_consts.pm:509
#: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italia"

#: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545
#: network/adsl_consts.pm:553 network/adsl_consts.pm:561
#: network/adsl_consts.pm:569 network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "Olanda"

#: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577
#: network/adsl_consts.pm:582 network/adsl_consts.pm:587
#: network/adsl_consts.pm:592 network/adsl_consts.pm:597
#: network/adsl_consts.pm:602 network/adsl_consts.pm:607
#, c-format
msgid "Norway"
msgstr "Norvegia"

#: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614
#: network/adsl_consts.pm:624
#, c-format
msgid "Poland"
msgstr "Polonia"

#: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772
#, c-format
msgid "Sweden"
msgstr "Suedia"

#: crypto.pm:28 lang.pm:382
#, c-format
msgid "Slovakia"
msgstr "Slovacia"

#: crypto.pm:29 lang.pm:406
#, c-format
msgid "Taiwan"
msgstr "Taiwan"

#: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "Statele Unite"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Nou"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Demontare"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Montare"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:435
#: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Punct de montare"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Vă rog să introduceţi URL-ul pentru serverul WebDAV"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL-ul trebuie să înceapă cu http:// sau https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server:"

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:504
#: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241
#, c-format
msgid "Mount point: "
msgstr "Punct de montare: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248
#, c-format
msgid "Options: %s"
msgstr "Opţiuni: %s"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "Vă rog faceţi mai întâi o copie a datelor dumneavoastră"

#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Dacă doriţi să folosiţi aboot, asiguraţi-vă să lăsaţi un spaţiu liber\n"
"(2048 de sectoare sunt de ajuns) la începutul discului"

#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Asistent"

#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "Alegeţi acţiunea"

#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Aveţi o singură partiţie mare Microsoft  Dos/Windows).\n"
"Va sugerez să redimensionaţi mai întîi acea partiţie\n"
"faceţi clic pe ea şi apoi pe \"Redimensionează\")"

#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "Vă rog faceţi clic pe o partiţie"

#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482
#: standalone/drakbackup:2943 standalone/drakbackup:3003
#, c-format
msgid "Details"
msgstr "Detalii"

#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "Nu am găsit nici un disc fix"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Journalised FS"
msgstr "Sistem de fişiere jurnalizat"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "Window$"

#: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168
#: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Alt tip"

#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181
#, c-format
msgid "Empty"
msgstr "Gol"

#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "Tipul de fişiere sistem: "

#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "Foloseşte ``%s'' în loc"

#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459
#, c-format
msgid "Create"
msgstr "Creează"

#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:106 standalone/harddrake2:115
#, c-format
msgid "Type"
msgstr "Tip"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444
#: standalone/drakperm:124 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "Şterge"

#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Foloseşte ``Demontare' mai întîi"

#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "Alegeţi o altă partiţie"

#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "Alegeţi o partiţie"

#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "Ieşire"

#: diskdrake/interactive.pm:253 help.pm:530
#, c-format
msgid "Undo"
msgstr "Anulează"

#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "Trece în mod normal"

#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "Trece în mod expert"

#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "Continuaţi totuşi?"

#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""

#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "Ieşire fără a înregistra"

#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Ieşire din program fără a scrie în tabela de partiţii ?"

#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Doriţi să salvaţi modificările în /etc/fstab?"

#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Trebuie să redemaraţi pentru a înregistra modificările tabelei de partiţii"

#: diskdrake/interactive.pm:307 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Şterge tot"

#: diskdrake/interactive.pm:308 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Auto alocare"

#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "Mai multe"

#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "Informaţii despre discurile fixe"

#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "Toate partiţiile principale sunt alocate"

#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "Imposibil de adăugat o alta partiţie"

#: diskdrake/interactive.pm:348
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Pentru a avea mai multe partiţii, ştergeţi una pentru a putea crea una de "
"tip Extended "

#: diskdrake/interactive.pm:359 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Scrie tabelul de partiţii"

#: diskdrake/interactive.pm:360 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Restaurează tabelul de partiţii"

#: diskdrake/interactive.pm:361 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Salvează tabelul de partiţii"

#: diskdrake/interactive.pm:363 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Reîncarcă tabelul de partiţii"

#: diskdrake/interactive.pm:365
#, c-format
msgid "Removable media automounting"
msgstr "Automontare mediu detaşabil"

#: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402
#, c-format
msgid "Select file"
msgstr "Selectează fişierul"

#: diskdrake/interactive.pm:388
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Tabelul de partiţii salvat nu are aceeaşi mărime\n"
"Să continui totuşi ?"

#: diskdrake/interactive.pm:417
#, c-format
msgid "Trying to rescue partition table"
msgstr "Încerc să refac tabelul de partiţii"

#: diskdrake/interactive.pm:423
#, c-format
msgid "Detailed information"
msgstr "Informaţii detaliate"

#: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743
#, c-format
msgid "Resize"
msgstr "Redimensionează"

#: diskdrake/interactive.pm:439
#, c-format
msgid "Format"
msgstr "Formatează"

#: diskdrake/interactive.pm:441
#, c-format
msgid "Add to RAID"
msgstr "Adaugă la RAID"

#: diskdrake/interactive.pm:442
#, c-format
msgid "Add to LVM"
msgstr "Adaugă la LVM"

#: diskdrake/interactive.pm:445
#, c-format
msgid "Remove from RAID"
msgstr "Şterge din RAID"

#: diskdrake/interactive.pm:446
#, c-format
msgid "Remove from LVM"
msgstr "Şterge din LVM"

#: diskdrake/interactive.pm:447
#, c-format
msgid "Modify RAID"
msgstr "Modifică RAID"

#: diskdrake/interactive.pm:448
#, c-format
msgid "Use for loopback"
msgstr "Foloseşte pentru loopback"

#: diskdrake/interactive.pm:497
#, c-format
msgid "Create a new partition"
msgstr "Creează o nouă partiţie"

#: diskdrake/interactive.pm:500
#, c-format
msgid "Start sector: "
msgstr "Sector de început: "

#: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899
#, c-format
msgid "Size in MB: "
msgstr "Mărimea în MB: "

#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900
#, c-format
msgid "Filesystem type: "
msgstr "Tip sistem de fişiere: "

#: diskdrake/interactive.pm:508
#, c-format
msgid "Preference: "
msgstr "Preferinţă: "

#: diskdrake/interactive.pm:511
#, c-format
msgid "Logical volume name "
msgstr "Nume volum logic "

#: diskdrake/interactive.pm:541
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Nu se poate creea o nouă partiţie\n"
"(de vreme ce s-a atins numărul maxim de partiţii primare).\n"
"Întâi ştergeţi o partiţie primară şi creeaţi o partiţie extinsă."

#: diskdrake/interactive.pm:571
#, c-format
msgid "Remove the loopback file?"
msgstr "Doriţi ştergerea fişierului loopback?"

#: diskdrake/interactive.pm:590
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"După schimbarea tipului de partiţie %s, toate datele de pe această partiţie "
"se vor pierde"

#: diskdrake/interactive.pm:602
#, c-format
msgid "Change partition type"
msgstr "Schimbă tipul partiţiei"

#: diskdrake/interactive.pm:603 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Ce sistem de fişiere doriţi?"

#: diskdrake/interactive.pm:611
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Trec de la ext2 la ext3"

#: diskdrake/interactive.pm:640
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Unde doriţi să montaţi fişierul loopback %s?"

#: diskdrake/interactive.pm:641
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Unde doriţi să montaţi perifericul %s?"

#: diskdrake/interactive.pm:646
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Nu pot să desfiinţez acest punct de montare pentru că partiţia e folosită "
"pentru loopback.\n"
"Ştergeţi loopback-ul mai întâi"

#: diskdrake/interactive.pm:671
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Unde doriţi să montaţi %s?"

#: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Redimensionare"

#: diskdrake/interactive.pm:695
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Calculez limitele sistemului de fişiere FAT"

#: diskdrake/interactive.pm:731
#, c-format
msgid "This partition is not resizeable"
msgstr "Dimensiunea acestei partiţii nu poate fi modificată"

#: diskdrake/interactive.pm:736
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Toate datele de pe aceasta partiţie ar trebui salvate mai întîi"

#: diskdrake/interactive.pm:738
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"După redimensionarea partiţiei %s toate datele de pe aceasta partiţie vor fi "
"pierdute"

#: diskdrake/interactive.pm:743
#, c-format
msgid "Choose the new size"
msgstr "Alegeţi noua mărime"

#: diskdrake/interactive.pm:744
#, c-format
msgid "New size in MB: "
msgstr "Noua mărime în MB: "

#: diskdrake/interactive.pm:787 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:825
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Alegeţi un RAID existent la care să adăugaţi"

#: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844
#, c-format
msgid "new"
msgstr "nou"

#: diskdrake/interactive.pm:842
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Alegeţi un LVM existent la care să adăugaţi"

#: diskdrake/interactive.pm:848
#, c-format
msgid "LVM name?"
msgstr "Nume LVM?"

#: diskdrake/interactive.pm:884
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Această partiţie nu poate fi folosită pentru loopback"

#: diskdrake/interactive.pm:897
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:898
#, c-format
msgid "Loopback file name: "
msgstr "Numele fişierului loopback"

#: diskdrake/interactive.pm:903
#, c-format
msgid "Give a file name"
msgstr "Daţi un nume de fişier"

#: diskdrake/interactive.pm:906
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Fişierul este deja folosit de un alt loopback, alegeţi un altul"

#: diskdrake/interactive.pm:907
#, c-format
msgid "File already exists. Use it?"
msgstr "Fişierul există deja. Să-l folosesc ?"

#: diskdrake/interactive.pm:930
#, c-format
msgid "Mount options"
msgstr "Opţiuni pentru montare:"

#: diskdrake/interactive.pm:937
#, c-format
msgid "Various"
msgstr "Diverse"

#: diskdrake/interactive.pm:1002
#, c-format
msgid "device"
msgstr "dispozitiv"

#: diskdrake/interactive.pm:1003
#, c-format
msgid "level"
msgstr "nivel"

#: diskdrake/interactive.pm:1004
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "mărimea porţiunii "

#: diskdrake/interactive.pm:1021
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Atenţie: aceasta operaţie e periculoasă."

#: diskdrake/interactive.pm:1036
#, c-format
msgid "What type of partitioning?"
msgstr "Ce tip de partiţionare?"

#: diskdrake/interactive.pm:1074
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Va trebui să redemaraţi pentru ca schimbările sa fie luate în considerare"

#: diskdrake/interactive.pm:1083
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabelul de partiţii al perifericului %s va fi scris pe disc!"

#: diskdrake/interactive.pm:1096
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"După formatarea partiţiei %s toate datele de pe aceasta partiţie vor fi "
"pierdute"

#: diskdrake/interactive.pm:1112
#, c-format
msgid "Move files to the new partition"
msgstr "Mută fişierele pe partiţia nouă"

#: diskdrake/interactive.pm:1112
#, c-format
msgid "Hide files"
msgstr "Ascunde fişiere"

#: diskdrake/interactive.pm:1113
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Directorul %s conţine deja date\n"
"(%s)"

#: diskdrake/interactive.pm:1124
#, c-format
msgid "Moving files to the new partition"
msgstr "Mut fişierele pe partiţia nouă"

#: diskdrake/interactive.pm:1128
#, c-format
msgid "Copying %s"
msgstr "Copiez %s"

#: diskdrake/interactive.pm:1132
#, c-format
msgid "Removing %s"
msgstr "Şterg %s"

#: diskdrake/interactive.pm:1146
#, c-format
msgid "partition %s is now known as %s"
msgstr "partiţia %s este cunoscută acum ca %s"

#: diskdrake/interactive.pm:1147
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""

#: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226
#, c-format
msgid "Device: "
msgstr "Periferic: "

#: diskdrake/interactive.pm:1168
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "Nume gazdă:"

#: diskdrake/interactive.pm:1169
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1170
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Litera perifericului DOS: %s (doar o presupunere)\n"

#: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Type: "
msgstr "Tip: "

#: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "Nume: "

#: diskdrake/interactive.pm:1185
#, c-format
msgid "Start: sector %s\n"
msgstr "Start: sector %s\n"

#: diskdrake/interactive.pm:1186
#, c-format
msgid "Size: %s"
msgstr "Mărimea: %s"

#: diskdrake/interactive.pm:1188
#, c-format
msgid ", %s sectors"
msgstr ", %s sectori"

#: diskdrake/interactive.pm:1190
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "De la cilindrul %d la cilindrul %d\n"

#: diskdrake/interactive.pm:1191
#, c-format
msgid "Number of logical extents: %d"
msgstr ""

#: diskdrake/interactive.pm:1192
#, c-format
msgid "Formatted\n"
msgstr "Formatat\n"

#: diskdrake/interactive.pm:1193
#, c-format
msgid "Not formatted\n"
msgstr "Neformatat\n"

#: diskdrake/interactive.pm:1194
#, c-format
msgid "Mounted\n"
msgstr "Montat\n"

#: diskdrake/interactive.pm:1195
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1197
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Fişier(e) loopback: \n"
"   %s\n"

#: diskdrake/interactive.pm:1198
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partiţia demarată din oficiu\n"
"    (pentru demaraj MS-DOS, nu pentru lilo)\n"

#: diskdrake/interactive.pm:1200
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"

#: diskdrake/interactive.pm:1201
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "Mărimea porţiunii %s\n"

#: diskdrake/interactive.pm:1202
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discuri-RAID %s\n"

#: diskdrake/interactive.pm:1204
#, c-format
msgid "Loopback file name: %s"
msgstr "Numele fişierului loopback: %s"

#: diskdrake/interactive.pm:1207
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Sunt şanse ca această partiţie\n"
"să fie una cu drivere, probabil\n"
"ar trebui lăsată în pace.\n"

#: diskdrake/interactive.pm:1210
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Această partiţie specială\n"
"Bootstrap este pentru\n"
"demararea duală a sistemului.\n"

#: diskdrake/interactive.pm:1227
#, c-format
msgid "Read-only"
msgstr "Numai citire"

#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s\n"
msgstr "Mărime: %s\n"

#: diskdrake/interactive.pm:1229
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n"

#: diskdrake/interactive.pm:1230
#, c-format
msgid "Info: "
msgstr "Info: "

#: diskdrake/interactive.pm:1231
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discuri-LVM %s\n"

#: diskdrake/interactive.pm:1232
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tip tabelă de partiţii: %s\n"

#: diskdrake/interactive.pm:1233
#, c-format
msgid "on channel %d id %d\n"
msgstr "pe canalul %d id %d\n"

#: diskdrake/interactive.pm:1265
#, c-format
msgid "Filesystem encryption key"
msgstr "Cheie criptare pt. sistemul de fişiere"

#: diskdrake/interactive.pm:1266
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Selectaţi cheia de criptare pt. sistemul de fişiere"

#: diskdrake/interactive.pm:1269
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Această cheie e prea simplă (ar trebui să fie de cel puţin %d caractere)"

#: diskdrake/interactive.pm:1270
#, c-format
msgid "The encryption keys do not match"
msgstr "Cheile de criptare nu corespund"

#: diskdrake/interactive.pm:1273 network/netconnect.pm:1136
#: standalone/drakconnect:397
#, c-format
msgid "Encryption key"
msgstr "Cheia de criptare"

#: diskdrake/interactive.pm:1274
#, c-format
msgid "Encryption key (again)"
msgstr "Cheia de criptare (din nou)"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Schimbă tipul"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "Nu pot face login folosind numele utilizator %s (parolă incorectă?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Se cere autentificare în domeniu"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Numele utilizatorului"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Încă una"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Vă rog să introduceţi numele utilizator, parola şi numele de domeniu pentru "
"accesa această gazdă."

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494
#, c-format
msgid "Username"
msgstr "Nume utilizator"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Caută servere"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Caută servere noi"

#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Pachetul %s trebuie instalat. Doriţi să îl instalez?"

#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Pachetul obligatoriu %s lipseşte"

#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "Instalare pachete..."

#: do_pkgs.pm:217
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Şterg %s..."

#: fs.pm:487 fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "Montez partiţia %s"

#: fs.pm:488 fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montarea partiţiei %s în directorul %s a eşuat"

#: fs.pm:508 fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "Verific %s"

#: fs.pm:553 partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "eroare la demontarea %s: %s"

#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "Activez partiţia swap %s"

#: fs/format.pm:44 fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "Formatez partiţia %s"

#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "Crearea şi formatarea fişierului %s"

#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Nu ştiu cum să formatez %s în tipul %s"

#: fs/format.pm:88 fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s Formatarea %s eşuată"

#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs/type.pm:370
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Nu puteţi folosi JFS pentru partiţii mai mici de 16MB"

#: fs/type.pm:371
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Nu puteţi folosi ReiserFS pentru partiţii mai mici de 32MB"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "cu /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "server"

#: fsedit.pm:184
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Nu pot citi tabela de partiţii a dispozitivului %s, este prea stricată "
"pentru mine:(\n"
"Pot încerca să continui, ştergând toate partiţiile greşite (TOATE DATELE se "
"vor pierde!).\n"
"Cealată soluţie ar fi să nu permit modificarea tabelei de partiţii.\n"
"(eroarea este %s)\n"
"\n"
"Sunteţi de acord să pierdeţi toate partiţiile?\n"

#: fsedit.pm:401
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Punctele de montare trebuie sa înceapă cu un /"

#: fsedit.pm:402
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Punctele de montare au trebui să conţină doar caractere alfanumerice"

#: fsedit.pm:403
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Există deja o partiţie cu punctul de montare %s!\n"

#: fsedit.pm:405
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Aţi selectat o partiţie RAID software pentru root (/).\n"
"Nici un gestionar de demaraj nu e capabil să folosească aceasta fără\n"
"o partiţie /boot. Adăugaţi deci o partiţie /boot"

#: fsedit.pm:408
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "Nu puteţi folosi volumul logic LVM pentru punctul de montare %s"

#: fsedit.pm:410
#, fuzzy, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Aţi selectat o partiţie RAID software pentru root (/).\n"
"Nici un gestionar de demaraj nu e capabil să folosească aceasta fără\n"
"o partiţie /boot. Adăugaţi deci o partiţie /boot"

#: fsedit.pm:413
#, c-format
msgid ""
"You may not be able to install lilo (since lilo does not handle a LV on "
"multiple PVs)"
msgstr ""

#: fsedit.pm:416 fsedit.pm:418
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Acest director ar trebui să rămână în sistemul de fişiere al rădăcinii"

#: fsedit.pm:420 fsedit.pm:422
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Aveţi nevoie de un sistem de fişiere serios (ext2/ext3, reiserfs, xfs sau "
"jfs) pentru acest punct de montare.\n"

#: fsedit.pm:424
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
"Nu puteţi monta un sistem de fişiere criptat pentru punctul de montare %s"

#: fsedit.pm:485
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Spaţiu pe disc insuficient pentru auto-alocare"

#: fsedit.pm:487
#, c-format
msgid "Nothing to do"
msgstr "Nimic de făcut"

#: harddrake/data.pm:61 install_any.pm:1505
#, c-format
msgid "Floppy"
msgstr "Unităţi de dischete"

#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "Unităţi ZIP"

#: harddrake/data.pm:81 install_any.pm:1506
#, c-format
msgid "Hard Disk"
msgstr "Unităţi de disc"

#: harddrake/data.pm:90 install_any.pm:1507
#, c-format
msgid "CDROM"
msgstr "Unităţi CDROM"

#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr "Inscriptoare CD/DVD"

#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "Unităţi DVD-ROM"

#: harddrake/data.pm:120 standalone/drakbackup:2051
#, c-format
msgid "Tape"
msgstr "Unităţi de bandă"

#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr "Plăci video"

#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr "Plăci TV"

#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr "Alte dispozitive multimedia"

#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr "Plăci de sunet"

#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr "Webcam-uri"

#: harddrake/data.pm:180
#, c-format
msgid "Processors"
msgstr "Procesoare"

#: harddrake/data.pm:190
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Placă ISDN"

#: harddrake/data.pm:200
#, c-format
msgid "Ethernetcard"
msgstr "Plăci Ethernet"

#: harddrake/data.pm:218 network/netconnect.pm:518
#, c-format
msgid "Modem"
msgstr "Modem-uri"

#: harddrake/data.pm:228
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:242
#, c-format
msgid "Memory"
msgstr "Memorie"

#: harddrake/data.pm:251
#, fuzzy, c-format
msgid "AGP controllers"
msgstr "Controllere USB"

#: harddrake/data.pm:260 help.pm:186 help.pm:855
#: install_steps_interactive.pm:978
#, c-format
msgid "Printer"
msgstr "Imprimantă"

#: harddrake/data.pm:270
#, c-format
msgid "Joystick"
msgstr "Joystick-uri"

#: harddrake/data.pm:280
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Controllere (E)IDE/ATA"

#: harddrake/data.pm:289
#, fuzzy, c-format
msgid "SATA controllers"
msgstr "Controllere USB"

#: harddrake/data.pm:298
#, c-format
msgid "Firewire controllers"
msgstr ""

#: harddrake/data.pm:307
#, c-format
msgid "PCMCIA controllers"
msgstr "Controllere PCMCIA"

#: harddrake/data.pm:316
#, c-format
msgid "SCSI controllers"
msgstr "Controllere SCSI"

#: harddrake/data.pm:325
#, c-format
msgid "USB controllers"
msgstr "Controllere USB"

#: harddrake/data.pm:334
#, fuzzy, c-format
msgid "USB ports"
msgstr "Imprimantă USB"

#: harddrake/data.pm:343
#, c-format
msgid "SMBus controllers"
msgstr "Controllere SMBus"

#: harddrake/data.pm:352
#, c-format
msgid "Bridges and system controllers"
msgstr "Punţi şi controllere de sistem"

#: harddrake/data.pm:361
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118
#: install_steps_interactive.pm:938 standalone/keyboarddrake:28
#, c-format
msgid "Keyboard"
msgstr "Tastatură"

#: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971
#, c-format
msgid "Mouse"
msgstr "Maus"

#: harddrake/data.pm:397
#, c-format
msgid "Scanner"
msgstr "Scannere"

#: harddrake/data.pm:407 standalone/harddrake2:439
#, c-format
msgid "Unknown/Others"
msgstr "Necunoscut/Altele"

#: harddrake/data.pm:435
#, c-format
msgid "cpu # "
msgstr "CPU #"

#: harddrake/sound.pm:191 standalone/drakconnect:169
#: standalone/drakconnect:615
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Vă rog să aşteptaţi... Aplic configuraţia"

#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "Nu există driver alternativ"

#: harddrake/sound.pm:228
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "Configurare sunet"

#: harddrake/sound.pm:236
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Pilot:"

#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr "Depanare"

#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039
#: network/netconnect.pm:504 printer/printerdrake.pm:1142
#: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228
#: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341
#: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684
#: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643
#: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092
#: printer/printerdrake.pm:5183 standalone/drakTermServ:325
#: standalone/drakTermServ:1111 standalone/drakTermServ:1172
#: standalone/drakTermServ:1821 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224
#: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Avertisment"

#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr "Nu există pilot open-source"

#: harddrake/sound.pm:279
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Nu există un pilot liber pentru placa dvs. de sunet (%s), dar exista unul "
"proprietar la  \"%s\"."

#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "Nu există pilot cunoscut"

#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Nu există un pilot cunoscut pentru placa dvs. de sunet (%s)"

#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "Pilot necunoscut"

#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Eroare: Pilotul \"%s\" pentru placa dvs. de sunet nu este în listă"

#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr "Depanare sunet"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "Permite alegerea oricărui pilot"

#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Alegere arbitrară pilot"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "Auto-detecţie"

#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "Necunoscut|Generic"

#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "Model placă:"

#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr "Tip tuner: "

#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr "Număr buffere de captură:"

#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "Număr buffere de captură pt. captura mmap"

#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr "Configurare PLL :"

#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr "Sprijin radio:"

#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr "activare sprijin radio"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""

#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "Acceptă"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715
#, c-format
msgid "User name"
msgstr "Numele utilizatorului"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317
#: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581
#: standalone/drakTermServ:382 standalone/drakbackup:3946
#: standalone/drakbackup:4040 standalone/drakbackup:4057
#: standalone/drakbackup:4075 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "Următorul"

#: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:385
#, c-format
msgid "Advanced"
msgstr "Avansat(e)"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""

#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "Staţie de lucru"

#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "Dezvoltare"

#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "Mediu Grafic"

#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Selectare individuală a pachetelor"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Actualizare"

#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "Cu X"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Cu documentaţie de bază"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Instalare cu adevărat minimă"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792
#: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508
#: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255
#: ugtk2.pm:899 wizards.pm:156
#, c-format
msgid "No"
msgstr "Nu"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:736
#: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288
#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
#: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899
#: wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Da"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2333 standalone/drakbackup:2337
#: standalone/drakbackup:2341 standalone/drakbackup:2345
#, c-format
msgid "Configure"
msgstr "Configurează"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:873
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Ceas hardware fixat la GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Sincronizare automată a ceasului"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Foloseşte spaţiul liber"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Foloseşte o partiţie existentă"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Foloseşte spaţiul liber din partiţia Windows"

#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "Şterge tot discul"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Şterge Windows"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Partiţionare disc personalizată"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""

#: help.pm:409
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "generează dischetă de autoinstalare"

#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Replay"
msgstr ""

#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Automated"
msgstr "Automatizat"

#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Save packages selection"
msgstr "Înregistrare selecţie pachete"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425
#: interactive/newt.pm:316 printer/printerdrake.pm:3579
#: standalone/drakTermServ:361 standalone/drakbackup:3906
#: standalone/drakbackup:3945 standalone/drakbackup:4056
#: standalone/drakbackup:4071 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "Precedentul"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:156 standalone/drakbackup:4103
#, c-format
msgid "Install"
msgstr "Instalare"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""

#: help.pm:458
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "Administrator de securitate:"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:530
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "Automontare mediu detaşabil"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Schimbă între modul normal/expert"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "3 butoane cu rotiţă emulată"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Vă rog selectaţi portul corect. De exemplu, portul \"COM1\" din Windows e\n"
"numit \"ttyS0\" în GNU/Linux."

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "autentificare"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrakelinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandrakelinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:765 printer/cups.pm:115 printer/data.pm:118
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Expert"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1005
#: install_steps_interactive.pm:1022
#, c-format
msgid "Sound card"
msgstr "Placă de sunet"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrakelinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrakelinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:964 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Zona de timp"

#: help.pm:855 install_steps_interactive.pm:1038
#, c-format
msgid "TV card"
msgstr "Placă TV"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "Placă ISDN"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Interfaţă grafică"

#: help.pm:855 install_any.pm:1528 install_steps_interactive.pm:1056
#: standalone/drakbackup:2036
#, c-format
msgid "Network"
msgstr "Reţea"

#: help.pm:855 install_steps_interactive.pm:1071
#, fuzzy, c-format
msgid "Proxies"
msgstr "Profiluri"

#: help.pm:855 install_steps_interactive.pm:1082
#, c-format
msgid "Security Level"
msgstr "Nivel de securitate"

#: help.pm:855 install_steps_interactive.pm:1096
#, c-format
msgid "Firewall"
msgstr "Firewall"

#: help.pm:855 install_steps_interactive.pm:1110
#, c-format
msgid "Bootloader"
msgstr "Gestionar de demarare"

#: help.pm:855 install_steps_interactive.pm:1123 services.pm:193
#, c-format
msgid "Services"
msgstr "Servicii"

#: help.pm:858
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Alegeţi discul fix pe care doriţi să îl ştergeţi pentru a instala noua "
"partiţie\n"
"Makdrake Linux. Aveţi grijă, toate datele existente pe această partiţie\n"
"se vor pierde şi nu vor putea fi recuperate!"

#: help.pm:863
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Clic pe \"%s\" dacă doriţi ştergerea tuturor datelor şi partiţiilor "
"existente\n"
"pe acest disc fix. Fiţi atent(ă), după ce faceţi clic pe \"%s\", nu veţi "
"putea\n"
"recupera nici un fel de date sau partiţii de pe discul fix, inclusiv orice "
"dată\n"
"Windows.\n"
"\n"
"Clic pe \"%s\" pentru a opri această operaţie fără a pierde date\n"
"şi partiţii prezente pe discul fix."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Următorul ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Precedentul"

#: install2.pm:117
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Nu pot accesa modulele corespunzătoare nucleului dvs. (fişierul %s "
"lipseşte), în general aceasta înseamnă că discheta de demaraj nu este "
"sincronizată cu mediul de instalare (vă rog creeaţi o nouă dischetă de "
"demaraj)"

#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr "Trebuie de asemenea formatat(ă) %s"

#: install_any.pm:376
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "Aveţi o altă interfaţa?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:379
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "Aveţi vreo interfaţă %s ?"

#: install_any.pm:388 printer/printerdrake.pm:2929
#: printer/printerdrake.pm:2936 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:388
#, fuzzy, c-format
msgid "Network (http)"
msgstr "Reţea %s"

#: install_any.pm:388
#, fuzzy, c-format
msgid "Network (ftp)"
msgstr "Reţea %s"

#: install_any.pm:436 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "Nu am găsit nici un dispozitiv"

#: install_any.pm:440
#, c-format
msgid "Insert the CD"
msgstr ""

#: install_any.pm:445
#, fuzzy, c-format
msgid "Unable to mount CD-ROM"
msgstr "Nu pot executa fork: %s"

#: install_any.pm:468
#, c-format
msgid "Insert the CD 1 again"
msgstr ""

#: install_any.pm:478 install_any.pm:482
#, c-format
msgid "URL of the mirror?"
msgstr ""

#: install_any.pm:515
#, fuzzy, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Nu găsesc %s pe %s"

#: install_any.pm:633
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Schimbaţi Cd-Rom-ul!\n"
"\n"
"Vă rog introduceţi Cd-Rom-ul etichetat \"%s\" şi apoi apăsaţi Ok."

#: install_any.pm:652
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "Detecţia este în progres..."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:783
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:806
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Următoarele pachete vor fi şterse pentru a permite actualizarea sistemului "
"dvs: %s\n"
"\n"
"\n"
"Chiar doriţi ştergerea acestor pachete?\n"

#: install_any.pm:1214 partition_table.pm:603
#, c-format
msgid "Error reading file %s"
msgstr "hEroare la citirea fişierului %s"

#: install_any.pm:1425
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "Este necesară instalarea următoarelor pachetele: \n"

#: install_any.pm:1427
#, c-format
msgid "%s (previously named as %s)"
msgstr ""

#: install_any.pm:1465
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"A apărut o eroare - nu am găsit nici un periferic bun pentru a instala "
"sisteme de fişiere noi. Verificaţi echipamentele pentru a detecta cauza "
"acestei probleme."

#: install_any.pm:1509
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1509
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1509
#, fuzzy, c-format
msgid "NFS"
msgstr "HFS"

#: install_any.pm:1532
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "Vă rog să alegeţi"

#: install_any.pm:1564
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "am adăugat mediul %s"

#: install_any.pm:1576
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "Fişierul există deja. Îl suprascriu?"

#: install_any.pm:1627
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Nu pot captura ecranul înainte de partiţionare"

#: install_any.pm:1634
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Capturile ecran vor fi disponibile după instalare în %s"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Instalare sistem"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Configurare sistem"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Trebuie să aveţi o partiţie root.\n"
"Pentru aceasta, creaţi o partiţie (sau faceţi clic pe un existentă).\n"
"Alegeţi apoi acţiunea ``Punct de montare'' şi fixaţi-o la '/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Nu aveţi nici o partiţie swap\n"
"\n"
"Să continui totuşi?"

#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Trebuie să aveţi o partiţie FAT montată în /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Spaţiu pe disc insuficient pentru alocarea de noi partiţii"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Foloseşte partiţionarea existentă"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Nu există partiţii utilizabile"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Foloseşte partiţia Windows pentru loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Ce partiţie doriţi să folosiţi pentru a instala Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Alegeţi mărimile"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Mărimea partiţiei root în MB:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Mărimea partiţiei swap în MB: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Care partiţie doriţi să o redimensionaţi?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Calculez dimensiunea partiţiei Windows"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"AVERTISMENT!\n"
"\n"
"DrakX va redimensiona acum partiţia Windows. Aveţi grijă: această\n"
"operaţie este periculoasă. Dacă nu aţi făcut-o deja, trebuie să părăsiţi\n"
"instalarea, să rulaţi \"chkdsk c:\" de la linia de comandă sub Windows\n"
"(atenţie, rularea programului grafic \"scandisk\" nu ajunge, asiguraţi-vă\n"
"că folosiţi \"chkdsk\" de la linia de comandă!), opţional rulaţi defrag, "
"apoi\n"
"reîncepeţi instalarea. Ar trebui de asemenea să faceţi o copie a datelor\n"
"dumneavoastră. Când sunteţi sigur, apăsaţi Ok."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Cât spaţiu doriţi să păstraţi alocat pentru Windows pe"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "partiţia %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Redimensionez partiţia Windows"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Redimensionarea FAT a eşuat: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Şterge Windows(TM)"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Aveţi mai multe discuri fixe, pe care din ele doriţi să instalaţi Linux?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "TOATE partiţiile existente şi datele lor se vor pierde pe unitatea %s"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "Foloseşte fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Puteţi partiţiona acum discul %s \n"
"Cînd aţi terminat, nu uitaţi să înregistraţi folosind `w'"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "Nu am spaţiu suficient pentru instalare"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Asistentul de partiţionare DrakX a găsit următoarele soluţii:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partiţionarea a eşuat: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "Pornire reţea"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "Oprire reţea"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandrakesoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandrakesoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandrakesoft S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandrakesoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandrakesoft.\n"
"The programs developed by Mandrakesoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandrakesoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandrakesoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"Mandrakesoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandrakesoft S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:131
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"Felicitări, instalarea e completă.\n"
"Scoateţi media de demaraj şi apăsaţi Enter pentru redemaraj.\n"
"\n"
"\n"
"Pentru informaţii asupra corecţiilor disponibile pentru aceasta versiune\n"
"Mandrakelinux, consultaţi Erata disponibilă la \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informaţiile asupra configurării sistemului sunt disponibile în \n"
"capitolul referitor la post instalare din \n"
"Official Mandrakelinux User's Guide."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrakelinux.com/en/errata.php3"
msgstr "http://www.mandrakelinux.com/en/errata.php3"

#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr "Punct de montare duplicat %s"

#: install_steps.pm:479
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Cîteva pachete importante nu s-au instalat corect.\n"
"Sau aveţi o problemă cu perifericul de cdrom sau cu \n"
"cdrom-ul propriu-zis. Folosiţi comanda \"rpm -qpl \n"
"media/main/*.rpm\" pentru a verifica cdrom-ul pe un\n"
"sistem instalat.\n"

#: install_steps.pm:599
#, c-format
msgid "No floppy drive available"
msgstr "Nici o unitate de dischetă nu este disponibilă"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Începe etapa `%s'\n"

#: install_steps_gtk.pm:177
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""

#: install_steps_gtk.pm:224 install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "Selectarea grupurilor de pachete"

#: install_steps_gtk.pm:250 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Mărime totală: %d / %d MB "

#: install_steps_gtk.pm:295
#, c-format
msgid "Bad package"
msgstr "Pachet defectuos"

#: install_steps_gtk.pm:297
#, c-format
msgid "Version: "
msgstr "Versiune: "

#: install_steps_gtk.pm:298
#, c-format
msgid "Size: "
msgstr "Mărime: "

#: install_steps_gtk.pm:298
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:299
#, c-format
msgid "Importance: "
msgstr "Importanţă: "

#: install_steps_gtk.pm:332
#, c-format
msgid "You can not select/unselect this package"
msgstr "Nu puteţi selecta/deselecta acest pachet"

#: install_steps_gtk.pm:336
#, c-format
msgid "due to missing %s"
msgstr "datorită %s lipsă"

#: install_steps_gtk.pm:337
#, c-format
msgid "due to unsatisfied %s"
msgstr "datorită %s nesatisfăcute"

#: install_steps_gtk.pm:338
#, c-format
msgid "trying to promote %s"
msgstr "încerc să promovez %s"

#: install_steps_gtk.pm:339
#, c-format
msgid "in order to keep %s"
msgstr "pentru a păstra %s"

#: install_steps_gtk.pm:344
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr "Nu aveţi destul spaţiu pentru a instala acest pachet"

#: install_steps_gtk.pm:347
#, c-format
msgid "The following packages are going to be installed"
msgstr "Următoarele pachetele vor instalate"

#: install_steps_gtk.pm:348
#, c-format
msgid "The following packages are going to be removed"
msgstr "Următoarele pachete vor fi şterse"

#: install_steps_gtk.pm:372
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Acesta este un pachet indispensabil şi nu poate fi deselectat"

#: install_steps_gtk.pm:374
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "Nu puteţi deselecta acest pachet. E deja instalat"

#: install_steps_gtk.pm:377
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Acest pachet trebuie actualizat\n"
"Sunteţi sigur că doriţi să-l deselectaţi ?"

#: install_steps_gtk.pm:380
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "Nu puteţi deselecta acest pachet. Trebuie acualizat."

#: install_steps_gtk.pm:385
#, c-format
msgid "Show automatically selected packages"
msgstr "Arată pachetele selectate automat"

#: install_steps_gtk.pm:390
#, fuzzy, c-format
msgid "Load/Save selection"
msgstr "Selectare pachete"

#: install_steps_gtk.pm:391
#, c-format
msgid "Updating package selection"
msgstr "Actualizare pachete selectate"

#: install_steps_gtk.pm:396
#, c-format
msgid "Minimal install"
msgstr "Instalare minimă"

#: install_steps_gtk.pm:410 install_steps_interactive.pm:483
#, c-format
msgid "Choose the packages you want to install"
msgstr "Alegeţi pachetele pe care doriţi să le instalaţi"

#: install_steps_gtk.pm:426 install_steps_interactive.pm:706
#, c-format
msgid "Installing"
msgstr "În curs de instalare"

#: install_steps_gtk.pm:433
#, c-format
msgid "Estimating"
msgstr "Estimare"

#: install_steps_gtk.pm:482
#, c-format
msgid "No details"
msgstr "Fără detalii"

#: install_steps_gtk.pm:490
#, c-format
msgid "Time remaining "
msgstr "Timp rămas "

#: install_steps_gtk.pm:497
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Vă rog să aşteptaţi, pregătesc instalarea..."

#: install_steps_gtk.pm:512
#, c-format
msgid "%d packages"
msgstr "%d pachete"

#: install_steps_gtk.pm:517
#, c-format
msgid "Installing package %s"
msgstr "Instalarea pachetului  %s"

#: install_steps_gtk.pm:552 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731
#, c-format
msgid "Refuse"
msgstr "Refuză"

#: install_steps_gtk.pm:556 install_steps_interactive.pm:735
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Schimbaţi Cd-Rom-ul!\n"
"\n"
"Vă rog introduceţi Cd-Rom-ul etichetat \"%s\" şi apoi apăsaţi Ok.\n"
"Dacă nu-l aveţi, apăsaţi Renunţă pentru a evita instalarea de pe acest Cd-"
"Rom."

#: install_steps_gtk.pm:571 install_steps_interactive.pm:746
#, c-format
msgid "There was an error ordering packages:"
msgstr "O eroare a apărut la ordonarea pachetelor:"

#: install_steps_gtk.pm:571 install_steps_gtk.pm:575
#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
#, c-format
msgid "Go on anyway?"
msgstr "Să continui totuşi?"

#: install_steps_gtk.pm:575 install_steps_interactive.pm:750
#, c-format
msgid "There was an error installing packages:"
msgstr "A fost o eroare la instalarea pachetelor:"

#: install_steps_gtk.pm:617 install_steps_interactive.pm:920
#: install_steps_interactive.pm:1072
#, c-format
msgid "not configured"
msgstr "neconfigurat"

#: install_steps_gtk.pm:680
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_steps_gtk.pm:684
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""

#: install_steps_gtk.pm:686
#, c-format
msgid "Copy whole CDs"
msgstr ""

#: install_steps_interactive.pm:85
#, c-format
msgid "License agreement"
msgstr "Termeni de licenţiere"

#: install_steps_interactive.pm:89
#, fuzzy, c-format
msgid "Release Notes"
msgstr "Ediţia:"

#: install_steps_interactive.pm:119
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Vă rog să alegeţi dispunerea tastaturii."

#: install_steps_interactive.pm:121
#, fuzzy, c-format
msgid "Here is the full list of available keyboards"
msgstr "Aici este lista tuturor ţărilor disponibile"

#: install_steps_interactive.pm:151
#, c-format
msgid "Install/Upgrade"
msgstr "Instalare/Actualizare"

#: install_steps_interactive.pm:152
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Este vorba de o instalare sau de o actualizare ?"

#: install_steps_interactive.pm:158
#, c-format
msgid "Upgrade %s"
msgstr "Actualizare %s"

#: install_steps_interactive.pm:168
#, c-format
msgid "Encryption key for %s"
msgstr "Cheia de criptare pentru %s"

#: install_steps_interactive.pm:185
#, c-format
msgid "Please choose your type of mouse."
msgstr "Vă rog să alegeţi tipul de mouse folosit."

#: install_steps_interactive.pm:194 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Port Mouse"

#: install_steps_interactive.pm:195 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Pe ce port serie este conectat mouse-ul?"

#: install_steps_interactive.pm:205
#, c-format
msgid "Buttons emulation"
msgstr "Emulare butoane"

#: install_steps_interactive.pm:207
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulare buton 2"

#: install_steps_interactive.pm:208
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulare buton 3"

#: install_steps_interactive.pm:229
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:229
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Configuraţie cartele PCMCIA..."

#: install_steps_interactive.pm:236
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:236
#, c-format
msgid "Configuring IDE"
msgstr "Configuraţia IDE"

#: install_steps_interactive.pm:256 network/tools.pm:172
#, c-format
msgid "No partition available"
msgstr "nici o partiţie disponibilă"

#: install_steps_interactive.pm:259
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Scanez partiţiile pentru a găsi punctele de montare"

#: install_steps_interactive.pm:266
#, c-format
msgid "Choose the mount points"
msgstr "Alegeţi punctele de montare"

#: install_steps_interactive.pm:312
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:317
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""

#: install_steps_interactive.pm:353
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Alegeţi partiţiile pe care doriţi sa le formataăi"

#: install_steps_interactive.pm:355
#, c-format
msgid "Check bad blocks?"
msgstr "Să verific blocurile defectuoase?"

#: install_steps_interactive.pm:383
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:386
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Swap insuficient pentru a termina instalarea, mai adăugaţi ceva"

#: install_steps_interactive.pm:393
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Căutare pachete disponibile şi reconstrucţie bază de date RPM..."

#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
#, c-format
msgid "Looking for available packages..."
msgstr "Căutarea pachetelor disponibile"

#: install_steps_interactive.pm:397
#, c-format
msgid "Looking at packages already installed..."
msgstr "Căutare pachetele instalate deja ..."

#: install_steps_interactive.pm:401
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Cautarea pachetelor de actualizat"

#: install_steps_interactive.pm:421 install_steps_interactive.pm:825
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Alegeţi o oglindă de la care să descărcaţi pachetele"

#: install_steps_interactive.pm:461
#, c-format
msgid ""
"Your system does not have enough space left for installation or 
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Choosing packages&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;&quot;</span>

<span class="hl slc">#: steps_list.pm:31</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Installing&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Instalimi&quot;</span>

<span class="hl slc">#: steps_list.pm:34</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Users&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Përdoruesit&quot;</span>

<span class="hl slc">#: steps_list.pm:36 steps_list.pm:37</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Networking&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Punimi i rrjetit&quot;</span>

<span class="hl slc">#: steps_list.pm:38 steps_list.pm:39</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Bootloader&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Bootloader&quot;</span>

<span class="hl slc">#: steps_list.pm:40 steps_list.pm:41</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Configure X&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Konfigurim i X&quot;</span>

<span class="hl slc">#: steps_list.pm:42</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Summary&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Përmbledhje&quot;</span>

<span class="hl slc">#: steps_list.pm:44 steps_list.pm:45</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Services&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Serviset&quot;</span>

<span class="hl slc">#: steps_list.pm:46</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Updates&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;&quot;</span>

<span class="hl slc">#: steps_list.pm:48</span>
<span class="hl slc">#, c-format</span>
<span class="hl kwa">msgid</span> <span class="hl str">&quot;&quot;</span>
<span class="hl str">&quot;_: Keep these entry short</span><span class="hl esc">\n</span><span class="hl str">&quot;</span>
<span class="hl str">&quot;Exit&quot;</span>
<span class="hl kwa">msgstr</span> <span class="hl str">&quot;Braktise&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, &quot;</span>
<span class="hl slc">#~ &quot;gnumeric), pdf viewers, etc&quot;</span>
<span class="hl slc">#~ msgstr &quot;&quot;</span>
<span class="hl slc">#~ &quot;Programe për tryezë: trajtues të teksteve (kword, abiword), tablues &quot;</span>
<span class="hl slc">#~ &quot;(kspread, gnumeric), çfaqës pdf, etj.&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;Downloading file %s...&quot;</span>
<span class="hl slc">#~ msgstr &quot;Dërgimi i skedareve...&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;You have selected the following server(s): %s\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;These servers are activated by default. They do not have any known &quot;</span>
<span class="hl slc">#~ &quot;security\n&quot;</span>
<span class="hl slc">#~ &quot;issues, but some new ones could be found. In that case, you must make &quot;</span>
<span class="hl slc">#~ &quot;sure\n&quot;</span>
<span class="hl slc">#~ &quot;to upgrade as soon as possible.\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;Do you really want to install these servers?\n&quot;</span>
<span class="hl slc">#~ msgstr &quot;&quot;</span>
<span class="hl slc">#~ &quot;Ju keni zgjedhur server(et) e radhitur: %s\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;Këta server janë të aktivizuar me marrëveshje. Ata nuk kanë ndonji dalje\n&quot;</span>
<span class="hl slc">#~ &quot;të siguruar, mirëpo probleme të reja mund të paraqiten. Në ato momente\n&quot;</span>
<span class="hl slc">#~ &quot;ju duhet të jeni i sigurt që ti azhurnoni serverat tuja sa më shpejt.\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;Me të vërtetë dëshironi t&apos;instaloni këta server?\n&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;IceWm Desktop&quot;</span>
<span class="hl slc">#~ msgstr &quot;Tryeza&quot;</span>

<span class="hl slc">#~ msgid &quot;Contacting the mirror to get the list of available packages...&quot;</span>
<span class="hl slc">#~ msgstr &quot;Transferimi i listës së pasqyreve me pako të lira...&quot;</span>

<span class="hl slc">#~ msgid &quot;Unable to contact mirror %s&quot;</span>
<span class="hl slc">#~ msgstr &quot;Nuk mundur të kontaktohet pasqyrja %s&quot;</span>

<span class="hl slc">#~ msgid &quot;Generate auto install floppy&quot;</span>
<span class="hl slc">#~ msgstr &quot;Krijo një disketë auto instaluese&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;The auto install can be fully automated if wanted,\n&quot;</span>
<span class="hl slc">#~ &quot;in that case it will take over the hard drive!!\n&quot;</span>
<span class="hl slc">#~ &quot;(this is meant for installing on another box).\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;You may prefer to replay the installation.\n&quot;</span>
<span class="hl slc">#~ msgstr &quot;&quot;</span>
<span class="hl slc">#~ &quot;Auto instalimi mund të bëhet me instalim të automatizuar, nëse\n&quot;</span>
<span class="hl slc">#~ &quot;dëshironi, ai do të merë kontrolin mbi diskun tuaj të fort!!\n&quot;</span>
<span class="hl slc">#~ &quot;(është i përcaktuar për instalimin njodnjë makine tjetër).\n&quot;</span>
<span class="hl slc">#~ &quot;\n&quot;</span>
<span class="hl slc">#~ &quot;A dëshironi ta përsëritni instalimin.\n&quot;</span>

<span class="hl slc">#~ msgid &quot;Replay&quot;</span>
<span class="hl slc">#~ msgstr &quot;Rilexo&quot;</span>

<span class="hl slc">#~ msgid &quot;Automated&quot;</span>
<span class="hl slc">#~ msgstr &quot;Automatizuar&quot;</span>

<span class="hl slc">#~ msgid &quot;Save packages selection&quot;</span>
<span class="hl slc">#~ msgstr &quot;Regjistroi pakot e zgjedhura&quot;</span>

<span class="hl slc">#~ msgid &quot;Do you want to use aboot?&quot;</span>
<span class="hl slc">#~ msgstr &quot;A dëshironi ta përdorni aboot?&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;Error installing aboot, \n&quot;</span>
<span class="hl slc">#~ &quot;try to force installation even if that destroys the first partition?&quot;</span>
<span class="hl slc">#~ msgstr &quot;&quot;</span>
<span class="hl slc">#~ &quot;Gabim gjatë instalimit aboot, \n&quot;</span>
<span class="hl slc">#~ &quot;mundohu me instalim të forcuar, edhe pse ai do ta shkatërroj ndarjen e &quot;</span>
<span class="hl slc">#~ &quot;parë?&quot;</span>

<span class="hl slc">#~ msgid &quot;All&quot;</span>
<span class="hl slc">#~ msgstr &quot;Gjitha&quot;</span>

<span class="hl slc">#~ msgid &quot;TV card&quot;</span>
<span class="hl slc">#~ msgstr &quot;Kartelë TV&quot;</span>

<span class="hl slc">#~ msgid &quot;Boot&quot;</span>
<span class="hl slc">#~ msgstr &quot;Boot&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;_: Keep these entry short\n&quot;</span>
<span class="hl slc">#~ &quot;Authentication&quot;</span>
<span class="hl slc">#~ msgstr &quot;Vërtetësimi&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;(%d package, %d MB)&quot;</span>
<span class="hl slc">#~ msgid_plural &quot;(%d packages, %d MB)&quot;</span>
<span class="hl slc">#~ msgstr[0] &quot;%d pakot&quot;</span>
<span class="hl slc">#~ msgstr[1] &quot;%d pakot&quot;</span>

<span class="hl slc">#~ msgid &quot;%d packages&quot;</span>
<span class="hl slc">#~ msgstr &quot;%d pakot&quot;</span>

<span class="hl slc">#~ msgid &quot;Language&quot;</span>
<span class="hl slc">#~ msgstr &quot;Zgjedheni gjuhën tuaj&quot;</span>

<span class="hl slc">#~ msgid &quot;License&quot;</span>
<span class="hl slc">#~ msgstr &quot;Licenca&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;Installation class&quot;</span>
<span class="hl slc">#~ msgstr &quot;Zgjedhe klasën e instalimit&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;Formatting&quot;</span>
<span class="hl slc">#~ msgstr &quot;Vlerësimi në sipër&quot;</span>

<span class="hl slc">#, fuzzy</span>
<span class="hl slc">#~ msgid &quot;Choosing packages&quot;</span>
<span class="hl slc">#~ msgstr &quot;Zgjedhi pakot instaluese&quot;</span>

<span class="hl slc">#~ msgid &quot;Users&quot;</span>
<span class="hl slc">#~ msgstr &quot;Përdoruesit&quot;</span>

<span class="hl slc">#~ msgid &quot;Networking&quot;</span>
<span class="hl slc">#~ msgstr &quot;Punimi i rrjetit&quot;</span>

<span class="hl slc">#~ msgid &quot;Configure X&quot;</span>
<span class="hl slc">#~ msgstr &quot;Konfigurim i X&quot;</span>

<span class="hl slc">#~ msgid &quot;&quot;</span>
<span class="hl slc">#~ &quot;Can not access kernel modules corresponding to your kernel (file %s is &quot;</span>
<span class="hl slc">#~ &quot;missing), this generally means your boot floppy in not in sync with the &quot;</span>
<span class="hl slc">#~ &quot;Installation medium (please create a newer boot floppy)&quot;</span>
<span class="hl slc">#~ msgstr &quot;&quot;</span>
<span class="hl slc">#~ &quot;Nuk mund të hyjë në modulet të cilat i përkasin bërthamës suaj (skedarja &quot;</span>
<span class="hl slc">#~ &quot;%s mungon), kjo zakonisht do të thotë se disketa juaj me nisje të &quot;</span>
<span class="hl slc">#~ &quot;udhëzuar nuk sinkronizohet, me burimin instalues (ju lutemi krijoni një &quot;</span>
<span class="hl slc">#~ &quot;disketë të re)&quot;</span>
</code></pre></td></tr></table>
</div> <!-- class=content -->
<div class='footer'>generated by <a href='https://git.zx2c4.com/cgit/about/'>cgit v1.2.1</a> (<a href='https://git-scm.com/'>git 2.21.0</a>) at 2024-12-30 12:47:20 +0000</div>
</div> <!-- id=cgit -->
</body>
</html>
oard.pm:182 keyboard.pm:323
#, c-format
msgid "US keyboard"
msgstr "Tastatura US"

#: keyboard.pm:184
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Albaneză"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "Armeană (vechi)"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "Armeană (maşină de scris)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "Armeană (fonetic)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr ""

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr ""

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "Belgian"

#: keyboard.pm:191
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "Tamil (maşină de scris)"

#: keyboard.pm:192
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "Belgian"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "Bulgară (fonetic)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "Bulgară (BDS)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "Brazilian (ABNT-2)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr ""

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Bielorus"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "Elveţian (dispunere germanâ)"

#: keyboard.pm:201
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "Elveţian (dispunere francezâ)"

#: keyboard.pm:203
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Uzbekă (chirilică)"

#: keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "Ceh (QWERTY)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "German (făra taste moarte)"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "Daneză"

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:212
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Norvegiană)"

#: keyboard.pm:214
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (Norvegiană)"

#: keyboard.pm:216
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (US)"

#: keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (Norvegiană)"

#: keyboard.pm:219
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (US)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr ""

#: keyboard.pm:221
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Estonian"

#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Estonian"

#: keyboard.pm:226
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "Grec"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "Georgian (dispunere \"Rusă\")"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "Georgian (dispunere \"Latină\")"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "Grec"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "Ungar"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Croată"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr ""

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "Izraeliană"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "Izraeliană (fonetic)"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Iraniană"

#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Islandeză"

#: keyboard.pm:242
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "Italiană"

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr ""

#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Kannada"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr ""

#: keyboard.pm:254
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "Siriană (fonetic)"

#: keyboard.pm:255
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Tastatura UK"

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "Latin American"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr ""

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Lituanian AZERTY (vechi)"

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Lituanian AZERTY (nou)"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Lituanian QWERTY"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Lithuanian \"fonetic\" QWERTY"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "Letonă"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr ""

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Macedoneană"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr ""

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "Olandeză"

#: keyboard.pm:276
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "Siria"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Poloneză (dispunere qwerty)"

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Poloneză (dispunere qwertz)"

#: keyboard.pm:280
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "Polonez"

#: keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "Portugheză"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "Canadiană (Quebec)"

#: keyboard.pm:285
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "Românească (qwertz)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "Românească (qwerty)"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "Rusească (fonetic)"

#: keyboard.pm:289
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Saami (norvegiană)"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:292
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "Tastatură Thai"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "Slovenă"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "Slovacă (QWERTZ)"

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "Slovacă (QWERTY)"

#: keyboard.pm:298
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "Sârbă (dispunere chirilică)"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "Siriană"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "Siriană (fonetic)"

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "Telugu"

#: keyboard.pm:303
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "Tamilă (TSCII)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Tamil (maşină de scris)"

#: keyboard.pm:305
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "Tastatură Thai"

#: keyboard.pm:306
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "Tastatură Thai"

#: keyboard.pm:308
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "Tastatură Thai"

#: keyboard.pm:311
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (+latin/arabic)"
msgstr "Iugoslavă (latină)"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Tastatură Tadjică"

#: keyboard.pm:315
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "German"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "Turcă (model tradiţional \"F\")"

#: keyboard.pm:317
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "Turcă (model \"Q\" modern)"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "Ucrainiană"

#: keyboard.pm:322
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Siria"

#: keyboard.pm:324
#, c-format
msgid "US keyboard (international)"
msgstr "Tastatură US (internaţional)"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Uzbekă (chirilică)"

#: keyboard.pm:327
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr ""

#: keyboard.pm:328
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "Iugoslavă (latină)"

#: keyboard.pm:335
#, c-format
msgid "Right Alt key"
msgstr "Tasta Alt dreapta"

#: keyboard.pm:336
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Ambele taste Shift simultan"

#: keyboard.pm:337
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Tastele Ctrl şi Shift simultan"

#: keyboard.pm:338
#, c-format
msgid "CapsLock key"
msgstr "Tasta CapsLock"

#: keyboard.pm:339
#, fuzzy, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Tastele Ctrl şi Alt simultan"

#: keyboard.pm:340
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Tastele Ctrl şi Alt simultan"

#: keyboard.pm:341
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Tastele Alt şi Shift simultan"

#: keyboard.pm:342
#, c-format
msgid "\"Menu\" key"
msgstr "Tasta \"Menu\""

#: keyboard.pm:343
#, c-format
msgid "Left \"Windows\" key"
msgstr "Tasta \"Windows\" stânga"

#: keyboard.pm:344
#, c-format
msgid "Right \"Windows\" key"
msgstr "Tasta \"Windows\" dreapta"

#: keyboard.pm:345
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Ambele taste Control simultan"

#: keyboard.pm:346
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Ambele taste Alt simultan"

#: keyboard.pm:347
#, c-format
msgid "Left Shift key"
msgstr "Tasta Shift stânga"

#: keyboard.pm:348
#, c-format
msgid "Right Shift key"
msgstr "Tasta Shift dreapta"

#: keyboard.pm:349
#, c-format
msgid "Left Alt key"
msgstr "Tasta Alt stânga"

#: keyboard.pm:350
#, c-format
msgid "Left Control key"
msgstr "Tasta Control stânga"

#: keyboard.pm:351
#, c-format
msgid "Right Control key"
msgstr "Tasta Control dreapta"

#: keyboard.pm:387
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Aici puteţi alege tasta sau combinaţia de taste ce va\n"
"permite comutarea între diferitele dispuneri ale tastaturii\n"
"(de ex. latină şi non-latină)"

#: keyboard.pm:392
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:173
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:190
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: lang.pm:191 network/adsl_consts.pm:826
#, c-format
msgid "United Arab Emirates"
msgstr "Emiratele arabe unite"

#: lang.pm:192
#, c-format
msgid "Afghanistan"
msgstr "Afganistan"

#: lang.pm:193
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua şi Barbuda"

#: lang.pm:194
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: lang.pm:195
#, c-format
msgid "Albania"
msgstr "Albania"

#: lang.pm:196
#, c-format
msgid "Armenia"
msgstr "Armenia"

#: lang.pm:197
#, c-format
msgid "Netherlands Antilles"
msgstr "Antilele olandeze"

#: lang.pm:198
#, c-format
msgid "Angola"
msgstr "Angola"

#: lang.pm:199
#, c-format
msgid "Antarctica"
msgstr "Antarctica"

#: lang.pm:200 network/adsl_consts.pm:40 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: lang.pm:201
#, c-format
msgid "American Samoa"
msgstr "Samoa americană"

#: lang.pm:203 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Australia"

#: lang.pm:204
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:205
#, c-format
msgid "Azerbaijan"
msgstr "Azerbaijan"

#: lang.pm:206
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnia şi Herţegovina"

#: lang.pm:207
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:208
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: lang.pm:210
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:211 network/adsl_consts.pm:143 network/adsl_consts.pm:151
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: lang.pm:212
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: lang.pm:213
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: lang.pm:214
#, c-format
msgid "Benin"
msgstr "Benin"

#: lang.pm:215
#, c-format
msgid "Bermuda"
msgstr "Bermude"

#: lang.pm:216
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: lang.pm:217
#, c-format
msgid "Bolivia"
msgstr "Bolivia"

#: lang.pm:218 network/adsl_consts.pm:109 network/adsl_consts.pm:119
#: network/adsl_consts.pm:127 network/adsl_consts.pm:135
#, c-format
msgid "Brazil"
msgstr "Brazilia"

#: lang.pm:219
#, c-format
msgid "Bahamas"
msgstr "Bahamas"

#: lang.pm:220
#, c-format
msgid "Bhutan"
msgstr "Bhutan"

#: lang.pm:221
#, c-format
msgid "Bouvet Island"
msgstr "Bouvet Island"

#: lang.pm:222
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: lang.pm:223
#, c-format
msgid "Belarus"
msgstr "Belarus"

#: lang.pm:224
#, c-format
msgid "Belize"
msgstr "Belize"

#: lang.pm:225
#, c-format
msgid "Canada"
msgstr "Canada"

#: lang.pm:226
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Insulele Cocos (Keeling)"

#: lang.pm:227
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:228
#, c-format
msgid "Central African Republic"
msgstr "Republica centr-africană"

#: lang.pm:229
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:231
#, c-format
msgid "Cote d'Ivoire"
msgstr "Coasta de fildeş"

#: lang.pm:232
#, c-format
msgid "Cook Islands"
msgstr "Insulele Cook"

#: lang.pm:233
#, c-format
msgid "Chile"
msgstr "Chile"

#: lang.pm:234
#, c-format
msgid "Cameroon"
msgstr "Camerun"

#: lang.pm:235 network/adsl_consts.pm:159 network/adsl_consts.pm:167
#: network/adsl_consts.pm:175 network/adsl_consts.pm:183
#: network/adsl_consts.pm:191 network/adsl_consts.pm:199
#: network/adsl_consts.pm:207 network/adsl_consts.pm:215
#: network/adsl_consts.pm:223 network/adsl_consts.pm:231
#: network/adsl_consts.pm:239 network/adsl_consts.pm:247
#: network/adsl_consts.pm:255 network/adsl_consts.pm:263
#: network/adsl_consts.pm:271 network/adsl_consts.pm:279
#: network/adsl_consts.pm:287 network/adsl_consts.pm:295
#: network/adsl_consts.pm:303 network/adsl_consts.pm:311
#, c-format
msgid "China"
msgstr "China"

#: lang.pm:236
#, c-format
msgid "Colombia"
msgstr "Columbia"

#: lang.pm:238
#, c-format
msgid "Serbia & Montenegro"
msgstr "Serbia şi Muntenegru"

#: lang.pm:239
#, c-format
msgid "Cuba"
msgstr "Cuba"

#: lang.pm:240
#, c-format
msgid "Cape Verde"
msgstr "Cape Verde"

#: lang.pm:241
#, c-format
msgid "Christmas Island"
msgstr "Insulele Christmas"

#: lang.pm:242
#, c-format
msgid "Cyprus"
msgstr "Cipru"

#: lang.pm:245
#, c-format
msgid "Djibouti"
msgstr "Djibuti"

#: lang.pm:246 network/adsl_consts.pm:327
#, c-format
msgid "Denmark"
msgstr "Danemarca"

#: lang.pm:247
#, c-format
msgid "Dominica"
msgstr "Dominica"

#: lang.pm:248
#, c-format
msgid "Dominican Republic"
msgstr "Republica Dominicană"

#: lang.pm:249 network/adsl_consts.pm:30
#, c-format
msgid "Algeria"
msgstr "Algeria"

#: lang.pm:250
#, c-format
msgid "Ecuador"
msgstr "Ecuador"

#: lang.pm:251
#, c-format
msgid "Estonia"
msgstr "Estonia"

#: lang.pm:252
#, c-format
msgid "Egypt"
msgstr "Egipt"

#: lang.pm:253
#, c-format
msgid "Western Sahara"
msgstr "Sahara de vest"

#: lang.pm:254
#, c-format
msgid "Eritrea"
msgstr "Eritreea"

#: lang.pm:255 network/adsl_consts.pm:663 network/adsl_consts.pm:672
#: network/adsl_consts.pm:682 network/adsl_consts.pm:692
#: network/adsl_consts.pm:700 network/adsl_consts.pm:708
#: network/adsl_consts.pm:716 network/adsl_consts.pm:724
#: network/adsl_consts.pm:732 network/adsl_consts.pm:740
#: network/adsl_consts.pm:748 network/adsl_consts.pm:756
#: network/adsl_consts.pm:764
#, c-format
msgid "Spain"
msgstr "Spania"

#: lang.pm:256
#, c-format
msgid "Ethiopia"
msgstr "Etiopia"

#: lang.pm:257 network/adsl_consts.pm:335
#, c-format
msgid "Finland"
msgstr "Finlanda"

#: lang.pm:258
#, c-format
msgid "Fiji"
msgstr "Fiji"

#: lang.pm:259
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Insulele Falkland (Malvine)"

#: lang.pm:260
#, c-format
msgid "Micronesia"
msgstr "Micronezia"

#: lang.pm:261
#, c-format
msgid "Faroe Islands"
msgstr "Insulele Faroe"

#: lang.pm:263
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: lang.pm:264 network/adsl_consts.pm:836 network/adsl_consts.pm:846
#: network/netconnect.pm:52
#, c-format
msgid "United Kingdom"
msgstr "Marea Britanie"

#: lang.pm:265
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: lang.pm:266
#, c-format
msgid "Georgia"
msgstr "Georgia"

#: lang.pm:267
#, c-format
msgid "French Guiana"
msgstr "Guyana franceză"

#: lang.pm:268
#, c-format
msgid "Ghana"
msgstr "Ghana"

#: lang.pm:269
#, c-format
msgid "Gibraltar"
msgstr "Gibraltar"

#: lang.pm:270
#, c-format
msgid "Greenland"
msgstr "Groenlanda"

#: lang.pm:271
#, c-format
msgid "Gambia"
msgstr "Gambia"

#: lang.pm:272
#, c-format
msgid "Guinea"
msgstr "Guineea"

#: lang.pm:273
#, c-format
msgid "Guadeloupe"
msgstr "Guadeloupe"

#: lang.pm:274
#, c-format
msgid "Equatorial Guinea"
msgstr "Guineea ecuatorială"

#: lang.pm:276
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Insulele South Georgia şi South Sandwich"

#: lang.pm:277
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: lang.pm:278
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:279
#, c-format
msgid "Guinea-Bissau"
msgstr "Guineea-Bissau"

#: lang.pm:280
#, c-format
msgid "Guyana"
msgstr "Guyana"

#: lang.pm:281
#, fuzzy, c-format
msgid "Hong Kong SAR (China)"
msgstr "Hong Kong"

#: lang.pm:282
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Insulele Heard şi McDonald"

#: lang.pm:283
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: lang.pm:284
#, c-format
msgid "Croatia"
msgstr "Croaţia"

#: lang.pm:285
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: lang.pm:287
#, c-format
msgid "Indonesia"
msgstr "Indonezia"

#: lang.pm:288 network/adsl_consts.pm:471 standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irlanda"

#: lang.pm:289 network/adsl_consts.pm:479
#, c-format
msgid "Israel"
msgstr "Israel"

#: lang.pm:290
#, c-format
msgid "India"
msgstr "India"

#: lang.pm:291
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Teritoriul britanic din oceanul Indian"

#: lang.pm:292
#, c-format
msgid "Iraq"
msgstr "Irak"

#: lang.pm:293
#, c-format
msgid "Iran"
msgstr "Iran"

#: lang.pm:294
#, c-format
msgid "Iceland"
msgstr "Islanda"

#: lang.pm:296
#, c-format
msgid "Jamaica"
msgstr "Jamaica"

#: lang.pm:297
#, c-format
msgid "Jordan"
msgstr "Iordania"

#: lang.pm:298
#, c-format
msgid "Japan"
msgstr "Japonia"

#: lang.pm:299
#, c-format
msgid "Kenya"
msgstr "Kenya"

#: lang.pm:300
#, c-format
msgid "Kyrgyzstan"
msgstr "Kyrgyzstan"

#: lang.pm:301
#, c-format
msgid "Cambodia"
msgstr "Cambogia"

#: lang.pm:302
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:303
#, c-format
msgid "Comoros"
msgstr "Comore"

#: lang.pm:304
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts şi Nevis"

#: lang.pm:305
#, c-format
msgid "Korea (North)"
msgstr "Coreea de nord"

#: lang.pm:306
#, c-format
msgid "Korea"
msgstr "Coreea"

#: lang.pm:307
#, c-format
msgid "Kuwait"
msgstr "Kuweit"

#: lang.pm:308
#, c-format
msgid "Cayman Islands"
msgstr "Insulele Cayman"

#: lang.pm:309
#, c-format
msgid "Kazakhstan"
msgstr "Kazakstan"

#: lang.pm:310
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:311
#, c-format
msgid "Lebanon"
msgstr "Liban"

#: lang.pm:312
#, c-format
msgid "Saint Lucia"
msgstr "Saint Lucia"

#: lang.pm:313
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: lang.pm:314
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: lang.pm:315
#, c-format
msgid "Liberia"
msgstr "Liberia"

#: lang.pm:316
#, c-format
msgid "Lesotho"
msgstr "Lesotho"

#: lang.pm:317 network/adsl_consts.pm:527
#, c-format
msgid "Lithuania"
msgstr "Lituania"

#: lang.pm:318
#, c-format
msgid "Luxembourg"
msgstr "Luxemburg"

#: lang.pm:319
#, c-format
msgid "Latvia"
msgstr "Letonia"

#: lang.pm:320
#, c-format
msgid "Libya"
msgstr "Libia"

#: lang.pm:321 network/adsl_consts.pm:535
#, c-format
msgid "Morocco"
msgstr "Maroc"

#: lang.pm:322
#, c-format
msgid "Monaco"
msgstr "Monaco"

#: lang.pm:323
#, c-format
msgid "Moldova"
msgstr "Moldova"

#: lang.pm:324
#, c-format
msgid "Madagascar"
msgstr "Madagascar"

#: lang.pm:325
#, c-format
msgid "Marshall Islands"
msgstr "Insulele Marshall"

#: lang.pm:326
#, c-format
msgid "Macedonia"
msgstr "Macedonia"

#: lang.pm:327
#, c-format
msgid "Mali"
msgstr "Mali"

#: lang.pm:328
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: lang.pm:329
#, c-format
msgid "Mongolia"
msgstr "Mongolia"

#: lang.pm:330
#, c-format
msgid "Northern Mariana Islands"
msgstr "Insulele Mariane de nord"

#: lang.pm:331
#, c-format
msgid "Martinique"
msgstr "Martinica"

#: lang.pm:332
#, c-format
msgid "Mauritania"
msgstr "Mauritania"

#: lang.pm:333
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: lang.pm:334
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:335
#, c-format
msgid "Mauritius"
msgstr "Mauritius"

#: lang.pm:336
#, c-format
msgid "Maldives"
msgstr "Maldive"

#: lang.pm:337
#, c-format
msgid "Malawi"
msgstr "Malawi"

#: lang.pm:338
#, c-format
msgid "Mexico"
msgstr "Mexic"

#: lang.pm:339
#, c-format
msgid "Malaysia"
msgstr "Malaezia"

#: lang.pm:340
#, c-format
msgid "Mozambique"
msgstr "Mozambic"

#: lang.pm:341
#, c-format
msgid "Namibia"
msgstr "Namibia"

#: lang.pm:342
#, c-format
msgid "New Caledonia"
msgstr "Noua Caledonie"

#: lang.pm:343
#, c-format
msgid "Niger"
msgstr "Niger"

#: lang.pm:344
#, c-format
msgid "Norfolk Island"
msgstr "Insulele Norfolk"

#: lang.pm:345
#, c-format
msgid "Nigeria"
msgstr "Nigeria"

#: lang.pm:346
#, c-format
msgid "Nicaragua"
msgstr "Nicaragua"

#: lang.pm:349
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:350
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: lang.pm:351
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:352
#, c-format
msgid "New Zealand"
msgstr "Noua Zeelandă"

#: lang.pm:353
#, c-format
msgid "Oman"
msgstr "Oman"

#: lang.pm:354
#, c-format
msgid "Panama"
msgstr "Panama"

#: lang.pm:355
#, c-format
msgid "Peru"
msgstr "Peru"

#: lang.pm:356
#, c-format
msgid "French Polynesia"
msgstr "Polinezia franceză"

#: lang.pm:357
#, c-format
msgid "Papua New Guinea"
msgstr "Papua Noua Guinee"

#: lang.pm:358
#, c-format
msgid "Philippines"
msgstr "Filipine"

#: lang.pm:359
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: lang.pm:361
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre şi Miquelon"

#: lang.pm:362
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:363
#, c-format
msgid "Puerto Rico"
msgstr "Puerto Rico"

#: lang.pm:364
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: lang.pm:365 network/adsl_consts.pm:634
#, c-format
msgid "Portugal"
msgstr "Portugalia"

#: lang.pm:366
#, c-format
msgid "Paraguay"
msgstr "Paraguay"

#: lang.pm:367
#, c-format
msgid "Palau"
msgstr "Palau"

#: lang.pm:368
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: lang.pm:369
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:370
#, c-format
msgid "Romania"
msgstr "România :-)"

#: lang.pm:371 network/adsl_consts.pm:642
#, c-format
msgid "Russia"
msgstr "Rusia"

#: lang.pm:372
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: lang.pm:373
#, c-format
msgid "Saudi Arabia"
msgstr "Arabia saudită"

#: lang.pm:374
#, c-format
msgid "Solomon Islands"
msgstr "Insulele Solomon"

#: lang.pm:375
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: lang.pm:376
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: lang.pm:378
#, c-format
msgid "Singapore"
msgstr "Singapore"

#: lang.pm:379
#, c-format
msgid "Saint Helena"
msgstr "Saint Helena"

#: lang.pm:380 network/adsl_consts.pm:652
#, c-format
msgid "Slovenia"
msgstr "Slovenia"

#: lang.pm:381
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Insulele Svalbard şi Jan Mayen"

#: lang.pm:383
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: lang.pm:384
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: lang.pm:385
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: lang.pm:386
#, c-format
msgid "Somalia"
msgstr "Somalia"

#: lang.pm:387
#, c-format
msgid "Suriname"
msgstr "Surinam"

#: lang.pm:388
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome şi Principe"

#: lang.pm:389
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: lang.pm:390
#, c-format
msgid "Syria"
msgstr "Siria"

#: lang.pm:391
#, c-format
msgid "Swaziland"
msgstr "Swaziland"

#: lang.pm:392
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Insulele Turks şi Caico"

#: lang.pm:393
#, c-format
msgid "Chad"
msgstr "Ciad"

#: lang.pm:394
#, c-format
msgid "French Southern Territories"
msgstr "Teritoriile franceze de sud"

#: lang.pm:395
#, c-format
msgid "Togo"
msgstr "Togo"

#: lang.pm:396 network/adsl_consts.pm:806
#, c-format
msgid "Thailand"
msgstr "Tailanda"

#: lang.pm:397
#, c-format
msgid "Tajikistan"
msgstr "Tadjikistan"

#: lang.pm:398
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:399
#, c-format
msgid "East Timor"
msgstr "Timorul de est"

#: lang.pm:400
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: lang.pm:401 network/adsl_consts.pm:816
#, c-format
msgid "Tunisia"
msgstr "Tunisia"

#: lang.pm:402
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:403
#, c-format
msgid "Turkey"
msgstr "Turcia"

#: lang.pm:404
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad şi Tobago"

#: lang.pm:405
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: lang.pm:407
#, c-format
msgid "Tanzania"
msgstr "Tanzania"

#: lang.pm:408
#, c-format
msgid "Ukraine"
msgstr "Ucraina"

#: lang.pm:409
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: lang.pm:410
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Insulele minore de pe lângă SUA"

#: lang.pm:412
#, c-format
msgid "Uruguay"
msgstr "Uruguay"

#: lang.pm:413
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: lang.pm:414
#, c-format
msgid "Vatican"
msgstr "Vatican"

#: lang.pm:415
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Saint Vincent şi Grenadinele"

#: lang.pm:416
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: lang.pm:417
#, c-format
msgid "Virgin Islands (British)"
msgstr "Insulele Virgine (Brit.)"

#: lang.pm:418
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Insulele Virgine (SUA)"

#: lang.pm:419
#, c-format
msgid "Vietnam"
msgstr "Viet Nam"

#: lang.pm:420
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: lang.pm:421
#, c-format
msgid "Wallis and Futuna"
msgstr "Insulele Wallis şi Futuna"

#: lang.pm:422
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: lang.pm:423
#, c-format
msgid "Yemen"
msgstr "Yemen"

#: lang.pm:424
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: lang.pm:425 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Africa de sud"

#: lang.pm:426
#, c-format
msgid "Zambia"
msgstr "Zambia"

#: lang.pm:427
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabwe"

#: lang.pm:1040
#, fuzzy, c-format
msgid "You should install the following packages: %s"
msgstr "Instalarea pachetului  %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: lang.pm:1043 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: lang.pm:1094
#, c-format
msgid "Welcome to %s"
msgstr "Bine aţi venit la %s"

#: loopback.pm:31
#, c-format
msgid "Circular mounts %s\n"
msgstr "Montări circulare %s\n"

#: lvm.pm:111
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Şterge întâi volumele logice\n"

#: modules/interactive.pm:21 standalone/drakconnect:1032
#, c-format
msgid "Parameters"
msgstr "Parametri"

#: modules/interactive.pm:21 standalone/draksec:51
#, c-format
msgid "NONE"
msgstr ""

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "Configurare manuală"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Aici puteţi configura fiecare parametru al modulului."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Am găsit interfaţele %s"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Aveţi o altă interfaţa?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Aveţi vreo interfaţă %s ?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Vezi info hardware"

#: modules/interactive.pm:82
#, fuzzy, c-format
msgid "Installing driver for USB controller"
msgstr "Instalarea driverului pentru placa %s - %s"

#: modules/interactive.pm:83
#, fuzzy, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Instalarea driverului pentru placa %s - %s"

#: modules/interactive.pm:84
#, fuzzy, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Instalarea driverului pentru placa %s - %s"

#: modules/interactive.pm:85
#, fuzzy, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Instalarea driverului pentru placa %s - %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instalarea driverului pentru placa %s - %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Acum puteţi furniza opţiunile pentru modulul %s.\n"
"Reţineţi că orice adresă trebuie introdusă cu prefixul 0x ca în '0x123'"

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Puteţi furniza acum opţiunile modulului %s.\n"
"Opţiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n"
"de exemplu, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "Opţiuni pentru module:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "Care driver %s să încerc?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"În anumite cazuri, driverul %s necesită informaţii suplimentare pentru a\n"
"funcţiona corect, dar funcţionează bine şi fără. Doriţi să specificaţi\n"
"opţiuni suplimentare sau îi permiteţi să interogheze calculatorul pentru\n"
"informaţiile necesare? Ocazional, interogarea poate bloca calculatorul,\n"
"dar n-ar trebui să producă nici o deteriorare."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "Autosondare"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "Specificaţi opţiunile"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Încăcarea modulului %s a eşuat.\n"
"Doriţi să încercaţi cu alţi parametri ?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "un număr"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d numere separate prin virgulă"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d şiruri separate prin virgulă"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "numere separate prin virgulă"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "şiruri separate prin virgulă"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Maus - Sun"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standard"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Maus PS/2 comun cu rotiţă"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
#: network/modem.pm:137 network/netconnect.pm:645 network/netconnect.pm:650
#: network/netconnect.pm:662 network/netconnect.pm:667
#: network/netconnect.pm:683 network/netconnect.pm:685
#, c-format
msgid "Automatic"
msgstr "Automată"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 buton"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Maus comun cu 2 butoane"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Maus generic cu 3 butoane cu rotiţă emulată"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Rotiţă"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "serial"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Maus comun cu 3 butoane"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan cu rotiţă emulată"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Seria Logitech CC cu rotiţă emulată"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (serie, tip vechi C7)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Maus Logitech (serial, tip C7 vechi) cu rotiţă emulată"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse cu rotiţă emulată"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "Busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 butoane"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 butoane"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 butoane cu rotiţă emulată"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Generale"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Explorer"

#: mouse.pm:89 mouse.pm:359 mouse.pm:368 mouse.pm:420
#, c-format
msgid "Synaptics Touchpad"
msgstr ""

#: mouse.pm:93 standalone/drakconnect:360 standalone/drakvpn:1140
#, c-format
msgid "none"
msgstr "nici unul"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Fără maus"

#: mouse.pm:546
#, c-format
msgid "Please test the mouse"
msgstr "Vă rog să testaţi mausul"

#: mouse.pm:548
#, c-format
msgid "To activate the mouse,"
msgstr "Pentru a activa mausul,"

#: mouse.pm:549
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "MIŞCAŢI ROTIŢA!"

#: network/adsl.pm:19
#, c-format
msgid "use PPPoE"
msgstr ""

#: network/adsl.pm:20
#, c-format
msgid "use PPTP"
msgstr ""

#: network/adsl.pm:21
#, c-format
msgid "use DHCP"
msgstr "Foloseşte DHCP"

#: network/adsl.pm:22
#, fuzzy, c-format
msgid "Alcatel Speedtouch USB"
msgstr "Vă rog să testaţi mausul:"

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
msgid " - detected"
msgstr "detectat"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using PPPoA) USB"
msgstr ""

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using DHCP) USB"
msgstr ""

#: network/adsl.pm:35 network/netconnect.pm:839
#, c-format
msgid "Connect to the Internet"
msgstr "Conectare la Internet"

#: network/adsl.pm:36 network/netconnect.pm:840
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use PPTP, a few use DHCP.\n"
"If you do not know, choose 'use PPPoE'"
msgstr ""

#: network/adsl.pm:41 network/netconnect.pm:844
#, fuzzy, c-format
msgid "ADSL connection type:"
msgstr "Conexiune ADSL"

#: network/drakfirewall.pm:12 share/compssUsers.pl:84
#, c-format
msgid "Web Server"
msgstr "Server Web"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Server nume de domeniu"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "Server SSH"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "Server FTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Server mail"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "Server POPşi IMAP"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "Server X"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr ""

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "Server DNS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr ""

#: network/drakfirewall.pm:131
#, c-format
msgid "No network card"
msgstr "Fără placă de reţea"

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:175
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:176
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:192
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:194
#, c-format
msgid "Other ports"
msgstr "Alte porturi"

#: network/isdn.pm:125 network/netconnect.pm:490 network/netconnect.pm:602
#: network/netconnect.pm:605
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:168 network/netconnect.pm:422
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:168 network/netconnect.pm:422
#, c-format
msgid "I do not know"
msgstr "Nu ştiu"

#: network/isdn.pm:169 network/netconnect.pm:422
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:170 network/netconnect.pm:422
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
#: network/netconnect.pm:650 network/netconnect.pm:667
#: network/netconnect.pm:683
#, c-format
msgid "Manual"
msgstr "Manual"

#: network/netconnect.pm:90 network/netconnect.pm:519
#: network/netconnect.pm:523
#, fuzzy, c-format
msgid "Manual choice"
msgstr "Myanmar"

#: network/netconnect.pm:90
#, c-format
msgid "Internal ISDN card"
msgstr "Modem ISDN intern"

#: network/netconnect.pm:100
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:101
#, fuzzy, c-format
msgid "Managed"
msgstr "Alegeţi limba"

#: network/netconnect.pm:102
#, fuzzy, c-format
msgid "Master"
msgstr "Mayotte"

#: network/netconnect.pm:103
#, fuzzy, c-format
msgid "Repeater"
msgstr "Restaurează"

#: network/netconnect.pm:104
#, c-format
msgid "Secondary"
msgstr "Secundară"

#: network/netconnect.pm:105
#, c-format
msgid "Auto"
msgstr "Auto"

#: network/netconnect.pm:108 printer/printerdrake.pm:1354
#: standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "Configurare manuală"

#: network/netconnect.pm:109
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "IP automat"

#: network/netconnect.pm:111
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:114
#, c-format
msgid "Protocol for the rest of the world"
msgstr ""

#: network/netconnect.pm:116 standalone/drakconnect:541
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Protocol European (EDSS1)"

#: network/netconnect.pm:117 standalone/drakconnect:542
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""

#: network/netconnect.pm:153
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Vă rog să testaţi mausul:"

#: network/netconnect.pm:154
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "Mod sistem"

#: network/netconnect.pm:155
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:156
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:160
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:161
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "Configurare manuală"

#: network/netconnect.pm:162
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:163
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:164
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:165
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:169
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Placă Ethernet"

#: network/netconnect.pm:170
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Placă Ethernet"

#: network/netconnect.pm:171
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:172
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:173
#, c-format
msgid "PPPoA LLC"
msgstr ""

#: network/netconnect.pm:174
#, c-format
msgid "PPPoA VC"
msgstr ""

#: network/netconnect.pm:178 standalone/drakconnect:476
#, c-format
msgid "Script-based"
msgstr "Bazat-pe-un-script"

#: network/netconnect.pm:179 standalone/drakconnect:476
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:180 standalone/drakconnect:476
#, c-format
msgid "Terminal-based"
msgstr "Bazat-pe-un-terminal"

#: network/netconnect.pm:181 standalone/drakconnect:476
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:182 standalone/drakconnect:476
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:238 standalone/drakconnect:59
#, c-format
msgid "Network & Internet Configuration"
msgstr "Configuraţie reţea şi Internet"

#: network/netconnect.pm:244
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "detectat la portul %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:246
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "Am detectat %s"

#: network/netconnect.pm:246
#, fuzzy, c-format
msgid "(detected)"
msgstr "detectat"

#: network/netconnect.pm:248
#, fuzzy, c-format
msgid "Modem connection"
msgstr "Conexiune cu Winmodem"

#: network/netconnect.pm:249
#, c-format
msgid "ISDN connection"
msgstr "Conexiune ISDN"

#: network/netconnect.pm:250
#, c-format
msgid "ADSL connection"
msgstr "Conexiune ADSL"

#: network/netconnect.pm:251
#, c-format
msgid "Cable connection"
msgstr "Conexiune pe cablu"

#: network/netconnect.pm:252
#, c-format
msgid "LAN connection"
msgstr "Conexiune LAN"

#: network/netconnect.pm:253 network/netconnect.pm:267
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "Conexiune pe cablu"

#: network/netconnect.pm:263
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Alegeţi conexiunea pe care doriţi să o configuraţi"

#: network/netconnect.pm:277
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""

#: network/netconnect.pm:285 network/netconnect.pm:879
#, c-format
msgid "Connection Configuration"
msgstr "Configurare conexiuni"

#: network/netconnect.pm:286 network/netconnect.pm:880
#, c-format
msgid "Please fill or check the field below"
msgstr "Vă rog să completaţi câmpul de mai jos"

#: network/netconnect.pm:293 standalone/drakconnect:532
#, c-format
msgid "Card IRQ"
msgstr "IRQ placă"

#: network/netconnect.pm:294 standalone/drakconnect:533
#, c-format
msgid "Card mem (DMA)"
msgstr "Memorie placă (DMA)"

#: network/netconnect.pm:295 standalone/drakconnect:534
#, c-format
msgid "Card IO"
msgstr "IO Placă"

#: network/netconnect.pm:296 standalone/drakconnect:535
#, c-format
msgid "Card IO_0"
msgstr "IO_0 Placă"

#: network/netconnect.pm:297
#, c-format
msgid "Card IO_1"
msgstr "IO_1 Placă"

#: network/netconnect.pm:298
#, c-format
msgid "Your personal phone number"
msgstr "Numarul dvs. personal de telefon"

#: network/netconnect.pm:299 network/netconnect.pm:883
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Nume furnizor (ex. furnizor.ro)"

#: network/netconnect.pm:300 standalone/drakconnect:471
#, c-format
msgid "Provider phone number"
msgstr "Număr de telefon pt. furnizor"

#: network/netconnect.pm:301
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "DNS 1 furnizor (opţional)"

#: network/netconnect.pm:302
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "DNS 2 furnizor (opţional)"

#: network/netconnect.pm:303 standalone/drakconnect:422
#, c-format
msgid "Dialing mode"
msgstr "Mod de formare număr"

#: network/netconnect.pm:304 standalone/drakconnect:427
#: standalone/drakconnect:495
#, c-format
msgid "Connection speed"
msgstr "Viteză conexiune"

#: network/netconnect.pm:305 standalone/drakconnect:432
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Timp expirare conexiune (în sec.)"

#: network/netconnect.pm:308 network/netconnect.pm:329
#: network/netconnect.pm:886 standalone/drakconnect:469
#, c-format
msgid "Account Login (user name)"
msgstr "Cont: (nume utilizator)"

#: network/netconnect.pm:309 network/netconnect.pm:330
#: network/netconnect.pm:887 standalone/drakconnect:470
#, c-format
msgid "Account Password"
msgstr "Parola pt. cont"

#: network/netconnect.pm:325
#, fuzzy, c-format
msgid "Cable: account options"
msgstr "Opţiuni de telefonie"

#: network/netconnect.pm:328
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:362 network/netconnect.pm:715
#: network/netconnect.pm:920
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "Alegeţi interfaţa de reţea"

#: network/netconnect.pm:364 network/netconnect.pm:412
#: network/netconnect.pm:716 network/netconnect.pm:922
#: network/netconnect.pm:1091 network/shorewall.pm:98
#: standalone/drakconnect:684 standalone/drakgw:224 standalone/drakvpn:221
#, c-format
msgid "Net Device"
msgstr "Dispozitiv reţea"

#: network/netconnect.pm:365 network/netconnect.pm:373
#, c-format
msgid "External ISDN modem"
msgstr "Modem ISDN extern"

#: network/netconnect.pm:411 standalone/harddrake2:210
#, c-format
msgid "Select a device!"
msgstr "Alegeţi un dispozitiv!"

#: network/netconnect.pm:420 network/netconnect.pm:430
#: network/netconnect.pm:440 network/netconnect.pm:473
#: network/netconnect.pm:487
#, c-format
msgid "ISDN Configuration"
msgstr "Configurare ISDN"

#: network/netconnect.pm:421
#, c-format
msgid "What kind of card do you have?"
msgstr "Ce fel de placă aveţi?"

#: network/netconnect.pm:431
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""

#: network/netconnect.pm:435
#, c-format
msgid "Continue"
msgstr "Continuă"

#: network/netconnect.pm:435
#, c-format
msgid "Abort"
msgstr "Abandonează"

#: network/netconnect.pm:441
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr ""

#: network/netconnect.pm:459
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:461 standalone/drakconnect:116 standalone/drakups:247
#: standalone/harddrake2:131
#, c-format
msgid "Driver"
msgstr "Driver"

#: network/netconnect.pm:473
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Ce protocol doriţi să folosesc?"

#: network/netconnect.pm:475 standalone/drakconnect:116
#: standalone/drakconnect:309 standalone/drakconnect:540
#: standalone/drakvpn:1142
#, c-format
msgid "Protocol"
msgstr "Protocol"

#: network/netconnect.pm:487
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""

#: network/netconnect.pm:489 network/netconnect.pm:601
#: network/netconnect.pm:757
#, fuzzy, c-format
msgid "Provider:"
msgstr "Profil:"

#: network/netconnect.pm:504
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Modemul dumneavoastră nu este suportat de sistem.\n"
"Consultaţi http://www.linmodems.org"

#: network/netconnect.pm:516
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "Alegeţi interfaţa de reţea"

#: network/netconnect.pm:568
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Pe ce port serial este conectat modemul dumneavoastră?"

#: network/netconnect.pm:599
#, c-format
msgid "Select your provider:"
msgstr ""

#: network/netconnect.pm:627
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Opţiuni de telefonie"

#: network/netconnect.pm:630
#, c-format
msgid "Connection name"
msgstr "Nume de conexiune"

#: network/netconnect.pm:631
#, c-format
msgid "Phone number"
msgstr "Număr de telefon "

#: network/netconnect.pm:632
#, c-format
msgid "Login ID"
msgstr "ID de login"

#: network/netconnect.pm:647 network/netconnect.pm:680
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Parametri"

#: network/netconnect.pm:650
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Parametri"

#: network/netconnect.pm:651 network/netconnect.pm:1018
#: printer/printerdrake.pm:454 standalone/drakconnect:116
#: standalone/drakconnect:325 standalone/drakconnect:879
#: standalone/drakups:282
#, c-format
msgid "IP address"
msgstr "Adresă IP"

#: network/netconnect.pm:652
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "Mască subreţea:"

#: network/netconnect.pm:664
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:667
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:668
#, c-format
msgid "Domain name"
msgstr "Nume domeniu"

#: network/netconnect.pm:669 network/netconnect.pm:884
#: standalone/drakconnect:997
#, c-format
msgid "First DNS Server (optional)"
msgstr "Primul server DNS (opţional)"

#: network/netconnect.pm:670 network/netconnect.pm:885
#: standalone/drakconnect:998
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Al doilea server DNS (opţional)"

#: network/netconnect.pm:671
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "Nume gazdă sau IP."

#: network/netconnect.pm:683 standalone/drakconnect:336
#, c-format
msgid "Gateway"
msgstr "Pasarelă"

#: network/netconnect.pm:684
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "Adresă IP"

#: network/netconnect.pm:715
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "Configuraţie LAN"

#: network/netconnect.pm:755
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "Vă rog să alegeţi ţara"

#: network/netconnect.pm:773
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/netconnect.pm:777 network/netconnect.pm:782
#, c-format
msgid "Use a floppy"
msgstr "Foloseşte o dischetă"

#: network/netconnect.pm:777 network/netconnect.pm:786
#, c-format
msgid "Use my Windows partition"
msgstr "Foloseşte partiţia Windows"

#: network/netconnect.pm:777 network/netconnect.pm:789
#, c-format
msgid "Do it later"
msgstr ""

#: network/netconnect.pm:796
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/netconnect.pm:803
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/netconnect.pm:818
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: network/netconnect.pm:889
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:890
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:893
#, fuzzy, c-format
msgid "Encapsulation:"
msgstr "Cheia de criptare"

#: network/netconnect.pm:910
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:922
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:922
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr ""

#: network/netconnect.pm:940
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Modifying the fields below will override this configuration.\n"
"Do you really want to reconfigure this device?"
msgstr ""

#: network/netconnect.pm:954 network/netconnect.pm:1436
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Felicitări, configurarea reţelei si a conexiunii la Internet s-a terminat.\n"
"\n"

#: network/netconnect.pm:971
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "Nume gazdă Zeroconf"

#: network/netconnect.pm:972 network/netconnect.pm:1005
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Configurez placa de reţea %s"

#: network/netconnect.pm:973
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""

#: network/netconnect.pm:1006
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Vă rog să introduceţi configuraţia IP pentru acest calculator.\n"
"Fiecare rubrică va trebui să fie completată ca o adresă IP în format\n"
"zecimal-punctat (de exemplu 192.168.1.55)."

#: network/netconnect.pm:1013
#, c-format
msgid "Assign host name from DHCP address"
msgstr ""

#: network/netconnect.pm:1014
#, c-format
msgid "DHCP host name"
msgstr "Nume gazdă DHCP"

#: network/netconnect.pm:1019 standalone/drakconnect:330
#: standalone/drakconnect:880 standalone/drakgw:320
#, c-format
msgid "Netmask"
msgstr "Mască de reţea:"

#: network/netconnect.pm:1021 standalone/drakconnect:415
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Urmăreşte id-ul plăcii de reţea (util pt. laptopuri)"

#: network/netconnect.pm:1022 standalone/drakconnect:416
#, c-format
msgid "Network Hotplugging"
msgstr "Reconfigurarea \"la cald\" a reţelei"

#: network/netconnect.pm:1024 standalone/drakconnect:410
#, c-format
msgid "Start at boot"
msgstr "Pornire la demaraj"

#: network/netconnect.pm:1027 standalone/drakconnect:883
#, c-format
msgid "DHCP client"
msgstr "Client DHCP"

#: network/netconnect.pm:1041 standalone/drakconnect:389
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "Timp expirare conexiune (în sec.)"

#: network/netconnect.pm:1042 standalone/drakconnect:392
#, fuzzy, c-format
msgid "Get DNS servers from DHCP"
msgstr "Adresa IP a serverulul DNS"

#: network/netconnect.pm:1043
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:1044
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:1037 printer/printerdrake.pm:1605
#: standalone/drakconnect:649
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "Adresa IP ar trebui să fie în formatul 1.2.3.4"

#: network/netconnect.pm:1057 standalone/drakconnect:686
#, fuzzy, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "Adresa gateway-ului ar trebui să fie în formatul 1.2.3.4"

#: network/netconnect.pm:1041
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:1046 standalone/drakTermServ:1742
#: standalone/drakTermServ:1743 standalone/drakTermServ:1744
#, c-format
msgid "%s already in use\n"
msgstr "%s este deja folosit\n"

#: network/netconnect.pm:1067
#, fuzzy, c-format
msgid "Choose an ndiswrapper driver"
msgstr "Alegere arbitrară pilot"

#: network/netconnect.pm:1068 network/netconnect.pm:1075
#, fuzzy, c-format
msgid "Install a new driver"
msgstr "Instalare sistem"

#: network/netconnect.pm:1068
#, fuzzy, c-format
msgid "Use already installed driver (%s)"
msgstr "Identitatea SSH este deja instalată"

#: network/netconnect.pm:1072 printer/printerdrake.pm:3644
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "Instalarea pachetului  %s"

#: network/netconnect.pm:1076
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr ""

#: network/netconnect.pm:1126 network/netconnect.pm:1155
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:1129 standalone/drakconnect:382
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "Mod expert"

#: network/netconnect.pm:1131 standalone/drakconnect:383
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:1132 standalone/drakconnect:384
#, fuzzy, c-format
msgid "Network ID"
msgstr "Reţea"

#: network/netconnect.pm:1133 standalone/drakconnect:385
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:1134 standalone/drakconnect:386
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1135 standalone/drakconnect:387
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:1141
#, c-format
msgid "Use Wi-Fi Protected Access (WPA)"
msgstr ""

#: network/netconnect.pm:1168
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1145
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1158 standalone/drakconnect:398
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1159
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1166 standalone/drakconnect:399
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Staţie de lucru pt. jocuri"

#: network/netconnect.pm:1167 standalone/drakconnect:400
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1168
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1175 standalone/drakconnect:401
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1176
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1184 standalone/drakconnect:402
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1185
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1259
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Vă rog introduceţi numele calculatorului.\n"
"Numele calculatorului ar trebui să fie un nume întreg-calificat,\n"
"ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n"
"Puteţi de asemenea introduce adresa IP a pasarelei, dacă aveţi una"

#: network/netconnect.pm:1263
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1265 standalone/drakconnect:996
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "Primul server DNS (opţional)"

#: network/netconnect.pm:1265
#, c-format
msgid "Host name"
msgstr "Nume gazdă"

#: network/netconnect.pm:1267
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "Server DNS"

#: network/netconnect.pm:1268
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "Server DNS"

#: network/netconnect.pm:1269
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "Server DNS"

#: network/netconnect.pm:1270
#, fuzzy, c-format
msgid "Search domain"
msgstr "Domeniu NIS"

#: network/netconnect.pm:1271
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1272
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (ex. %s)"

#: network/netconnect.pm:1274
#, c-format
msgid "Gateway device"
msgstr "Periferic gateway"

#: network/netconnect.pm:1283
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Adresa serverului DNS ar trebui să fie în formatul 1.2.3.4"

#: network/netconnect.pm:1288 standalone/drakconnect:652
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Adresa gateway-ului ar trebui să fie în formatul 1.2.3.4"

#: network/netconnect.pm:1299
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1303
#, c-format
msgid "Zeroconf Host name"
msgstr "Nume gazdă Zeroconf"

#: network/netconnect.pm:1306
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Numele gazdei Zeroconf nu trebuie să conţină un ."

#: network/netconnect.pm:1316
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Aţi configurat căi multiple de conectare la Internet.\n"
"Alegeţi-o pe cea pe care doriţi să o folosiţi.\n"
"\n"

#: network/netconnect.pm:1318
#, c-format
msgid "Internet connection"
msgstr "Conexiune la Internet"

#: network/netconnect.pm:1326
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "Configurarea s-a terminat, doriţi să aplicaţi setările ?"

#: network/netconnect.pm:1336
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "Doriţi să pornesc conectarea la demaraj?"

#: network/netconnect.pm:1345
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Doriţi să pornesc conectarea la demaraj?"

#: network/netconnect.pm:1354
#, fuzzy, c-format
msgid "Automatically at boot"
msgstr "Pornire la demaraj"

#: network/netconnect.pm:1356
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1358
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1367
#, fuzzy, c-format
msgid "How do you want to dial this connection?"
msgstr "Doriţi să pornesc conectarea la demaraj?"

#: network/netconnect.pm:1380
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "Reţeaua trebuie repornită. Doriţi să o repornesc?"

#: network/netconnect.pm:1387 network/netconnect.pm:1452
#, c-format
msgid "Network Configuration"
msgstr "Configuraţia reţelei"

#: network/netconnect.pm:1388
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"O problemă a avut loc la restartarea reţelei: \n"
"\n"
"%s"

#: network/netconnect.pm:1396
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Doriţi să încerc conectarea la Internet acum?"

#: network/netconnect.pm:1404 standalone/drakconnect:1028
#, c-format
msgid "Testing your connection..."
msgstr "Testez conexiunea dvs..."

#: network/netconnect.pm:1420
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Sistemul este acum conectat la Internet."

#: network/netconnect.pm:1421
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Din motive de securitate va fi deconectat acum."

#: network/netconnect.pm:1422
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Sistemul dvs. nu pare a fi conectat la Internet.\n"
"Încercaţi să reconfiguraţi conexiunea."

#: network/netconnect.pm:1439
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""

#: network/netconnect.pm:1440
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1453
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Pentru că faceţi o instalare prin reţea, reţeaua dumneavoastră este deja "
"configurată.\n"
"Apăsaţi Ok pentru a păstra configuraţia, sau Anulare pentru a reconfigura "
"conexiune la Internet şi reţeaua.\n"

#: network/netconnect.pm:1491
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:319
#, c-format
msgid "Proxies configuration"
msgstr "Configurare Proxy-uri"

#: network/network.pm:320
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:321
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:324
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy-ul ar trebui să fie http://..."

#: network/network.pm:325
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URL-ul trebuie să înceapă cu 'http:' sau 'ftp:'"

#: network/shorewall.pm:25
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Am detectat o configuraţie de Firewall!"

#: network/shorewall.pm:26
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Avertisment! A fost detectată o configuraţie firewall existentă. Ar putea fi "
"nevoie de unele ajustări manuale după instalare."

#: network/shorewall.pm:91 standalone/drakgw:217 standalone/drakvpn:214
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/tools.pm:181
#, c-format
msgid "Insert floppy"
msgstr "Introduceţi discheta"

#: network/tools.pm:182
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Introduceţi o dischetă formatată FAT în unitatea %s cu %s în directorul "
"rădăcină şi apăsaţi %s"

#: network/tools.pm:187
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Eroare la accesarea dischetei, nu pot monta dispozitivul %s"

#: partition_table.pm:397
#, c-format
msgid "mount failed: "
msgstr "montare eşuată: "

#: partition_table.pm:502
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Partiţiile extended nu sunt suportate pe această platformă "

#: partition_table.pm:520
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Aveţi o gaură în tabela de partiţii dar nu pot să o folosesc.\n"
"Singura soluţie e să deplasaţi partiţia principală pentru a avea gaura lîngă "
"partiţia extinsă"

#: partition_table.pm:611
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Restaurarea din fişierul %s a eşuat: %s"

#: partition_table.pm:613
#, c-format
msgid "Bad backup file"
msgstr "Backup defectuos"

#: partition_table.pm:633
#, c-format
msgid "Error writing to file %s"
msgstr "Eroare la scrierea în fişierul %s"

#: partition_table/raw.pm:240
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""

#: pkgs.pm:23
#, c-format
msgid "must have"
msgstr "trebuie avut"

#: pkgs.pm:24
#, c-format
msgid "important"
msgstr "important"

#: pkgs.pm:25
#, c-format
msgid "very nice"
msgstr "foarte simpatic"

#: pkgs.pm:26
#, c-format
msgid "nice"
msgstr "simpatic: "

#: pkgs.pm:27
#, c-format
msgid "maybe"
msgstr "poate"

#: pkgs.pm:474
#, fuzzy, c-format
msgid "Downloading file %s..."
msgstr "Trimit fişierele..."

#: printer/cups.pm:103
#, c-format
msgid "(on %s)"
msgstr "(pe %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr "(pe această maşină)"

#: printer/cups.pm:115 standalone/printerdrake:187
#, c-format
msgid "Configured on other machines"
msgstr "Configurat pe alte maşini"

#: printer/cups.pm:117
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Pe serverul CUPS \"%s\""

#: printer/cups.pm:117 printer/printerdrake.pm:4650
#: printer/printerdrake.pm:4660 printer/printerdrake.pm:4805
#: printer/printerdrake.pm:4816 printer/printerdrake.pm:5011
#, c-format
msgid " (Default)"
msgstr " (Implicit)"

#: printer/data.pm:56
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:57
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:69
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:70
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:91
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:92
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:117
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:147
#, fuzzy, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:148
#, fuzzy, c-format
msgid "Remote CUPS"
msgstr "Coadă imprimare CUPS la distanţă"

#: printer/detect.pm:153 printer/detect.pm:236 printer/detect.pm:438
#: printer/detect.pm:475
#, c-format
msgid "Unknown Model"
msgstr "Model necunoscut"

#: printer/main.pm:27
#, c-format
msgid "Local printer"
msgstr "Imprimantă locală"

#: printer/main.pm:28
#, c-format
msgid "Remote printer"
msgstr "Imprimantă la distanţă"

#: printer/main.pm:29
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Imprimantă conectată la server CUPS"

#: printer/main.pm:30 printer/printerdrake.pm:1628
#, c-format
msgid "Printer on remote lpd server"
msgstr "Imprimantă conectată la server lpd:"

#: printer/main.pm:31
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Imprimantă de reţea (TCP/Socket)"

#: printer/main.pm:32
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Imprimantă conectată la server SMB/Windows 95/98/NT"

#: printer/main.pm:33
#, c-format
msgid "Printer on NetWare server"
msgstr "Imprimantă conectată la server Netware"

#: printer/main.pm:34 printer/printerdrake.pm:1632
#, c-format
msgid "Enter a printer device URI"
msgstr "Introduceţi un URI de dispozitiv de imprimare"

#: printer/main.pm:35
#, c-format
msgid "Pipe job into a command"
msgstr ""

#. Translation of the "(recommended)" in printer driver entries
#: printer/main.pm:45
#, c-format
msgid "recommended"
msgstr "recomandată"

#: printer/main.pm:324 printer/main.pm:629 printer/main.pm:1664
#: printer/main.pm:2699 printer/main.pm:2708 printer/printerdrake.pm:903
#: printer/printerdrake.pm:2094 printer/printerdrake.pm:5048
#, c-format
msgid "Unknown model"
msgstr "Model necunoscut"

#: printer/main.pm:349 standalone/printerdrake:186
#, c-format
msgid "Configured on this machine"
msgstr "Configurat pentru această maşină"

#: printer/main.pm:355 printer/printerdrake.pm:1175
#, c-format
msgid " on parallel port #%s"
msgstr " pe portul paralel #%s"

#: printer/main.pm:358 printer/printerdrake.pm:1178
#, c-format
msgid ", USB printer #%s"
msgstr ", imprimantă USB #%s"

#: printer/main.pm:360
#, c-format
msgid ", USB printer"
msgstr ", imprimantă USB "

#: printer/main.pm:364
#, fuzzy, c-format
msgid ", HP printer on a parallel port"
msgstr "Imprimantă pe portul paralel #%s"

#: printer/main.pm:366
#, fuzzy, c-format
msgid ", HP printer on USB"
msgstr ", imprimantă USB "

#: printer/main.pm:368
#, fuzzy, c-format
msgid ", HP printer on HP JetDirect"
msgstr "Dispozitiv multifuncţional pe HP JetDirect"

#: printer/main.pm:370
#, fuzzy, c-format
msgid ", HP printer"
msgstr ", imprimantă USB "

#: printer/main.pm:376
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", dispozitiv multifuncţional pe portul paralel #%s"

#: printer/main.pm:379
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", dispozitiv multifuncţional pe un port paralel"

#: printer/main.pm:381
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:383
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:385
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:389
#, c-format
msgid ", printing to %s"
msgstr ", tipărire la %s"

#: printer/main.pm:392
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:395
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", gazda TCP/IP \"%s\", port %s"

#: printer/main.pm:400
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:405
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " pe serverul Novell \"%s\", imprimanta \"%s\""

#: printer/main.pm:408
#, c-format
msgid ", using command %s"
msgstr ", folosind comanda %s"

#: printer/main.pm:423
#, c-format
msgid "Parallel port #%s"
msgstr "Portul paralel #%s"

#: printer/main.pm:426 printer/printerdrake.pm:1196
#: printer/printerdrake.pm:1223 printer/printerdrake.pm:1241
#, c-format
msgid "USB printer #%s"
msgstr "imprimantă USB #%s"

#: printer/main.pm:428
#, c-format
msgid "USB printer"
msgstr "Imprimantă USB"

#: printer/main.pm:432
#, fuzzy, c-format
msgid "HP printer on a parallel port"
msgstr "Imprimantă pe portul paralel #%s"

#: printer/main.pm:434
#, fuzzy, c-format
msgid "HP printer on USB"
msgstr "Nu am găsit nici o imprimantă!"

#: printer/main.pm:436
#, fuzzy, c-format
msgid "HP printer on HP JetDirect"
msgstr "Dispozitiv multifuncţional pe HP JetDirect"

#: printer/main.pm:438
#, fuzzy, c-format
msgid "HP printer"
msgstr "Imprimantă"

#: printer/main.pm:444
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "Dispozitiv multifuncţional pe portul paralel #%s"

#: printer/main.pm:447
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "Dispozitiv multifuncţional pe un port paralel"

#: printer/main.pm:449
#, c-format
msgid "Multi-function device on USB"
msgstr "Dispozitiv multifuncţional pe USB"

#: printer/main.pm:451
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "Dispozitiv multifuncţional pe HP JetDirect"

#: printer/main.pm:453
#, c-format
msgid "Multi-function device"
msgstr "Dispozitiv multifuncţional"

#: printer/main.pm:457
#, c-format
msgid "Prints into %s"
msgstr "Tipăreşte la %s"

#: printer/main.pm:460
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "Server LPD \"%s\", imprimantă \"%s\""

#: printer/main.pm:463
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "Gazda TCP/IP \"%s\", port %s"

#: printer/main.pm:468
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:473
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:476
#, c-format
msgid "Uses command %s"
msgstr "Foloseşte comanda %s"

#: printer/main.pm:478
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:626 printer/printerdrake.pm:849
#: printer/printerdrake.pm:2861
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: printer/main.pm:1176 printer/printerdrake.pm:205
#: printer/printerdrake.pm:217
#, c-format
msgid "Local network(s)"
msgstr "Reţele locale"

#: printer/main.pm:1178 printer/printerdrake.pm:221
#, c-format
msgid "Interface \"%s\""
msgstr "Interfaţă \"%s\""

#: printer/main.pm:1180
#, c-format
msgid "Network %s"
msgstr "Reţea %s"

#: printer/main.pm:1182
#, c-format
msgid "Host %s"
msgstr "Nume gazdă %s"

#: printer/main.pm:1211
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: printer/printerdrake.pm:19
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:61
#, c-format
msgid "CUPS printer configuration"
msgstr "Configurare imprimante CUPS"

#: printer/printerdrake.pm:62
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:63
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:66
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:71
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Căutare automată imprimante disponibile pe maşinile la distanţă"

#: printer/printerdrake.pm:76
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Partajare imprimante pe gazde/reţele: "

#: printer/printerdrake.pm:78
#, c-format
msgid "Custom configuration"
msgstr "Configurare personalizată"

#: printer/printerdrake.pm:83 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, c-format
msgid "No remote machines"
msgstr "Nu există maşini la distanţă"

#: printer/printerdrake.pm:94
#, c-format
msgid "Additional CUPS servers: "
msgstr "Servere CUPS adiţionale:"

#: printer/printerdrake.pm:101
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:109
#, c-format
msgid "Japanese text printing mode"
msgstr "Mod de tipărire text japonez"

#: printer/printerdrake.pm:110
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:117
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Corectare automată a configuraţiei CUPS"

#: printer/printerdrake.pm:119
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:132 printer/printerdrake.pm:500
#: printer/printerdrake.pm:4292
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:135
#, c-format
msgid "On"
msgstr "Activat"

#: printer/printerdrake.pm:137 printer/printerdrake.pm:492
#: printer/printerdrake.pm:519
#, c-format
msgid "Off"
msgstr "Oprit"

#: printer/printerdrake.pm:138 printer/printerdrake.pm:501
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:155 printer/printerdrake.pm:230
#, c-format
msgid "Sharing of local printers"
msgstr "Partajare imprimante locale"

#: printer/printerdrake.pm:156
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:167
#, c-format
msgid "Add host/network"
msgstr "Adaugă gazdă/reţea"

#: printer/printerdrake.pm:173
#, c-format
msgid "Edit selected host/network"
msgstr "Editează gazda/reţeaua selectată"

#: printer/printerdrake.pm:182
#, c-format
msgid "Remove selected host/network"
msgstr "Şterge gazda/reţeaua selectată"

#: printer/printerdrake.pm:213 printer/printerdrake.pm:223
#: printer/printerdrake.pm:235 printer/printerdrake.pm:242
#: printer/printerdrake.pm:273 printer/printerdrake.pm:291
#, c-format
msgid "IP address of host/network:"
msgstr "Adresa IP a gazdei/reţelei:"

#: printer/printerdrake.pm:231
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:238
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:246
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:247 printer/printerdrake.pm:423
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:271
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:340 printer/printerdrake.pm:410
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Acesez imprimantele conectate la serverele CUPS"

#: printer/printerdrake.pm:341
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:352
#, c-format
msgid "Add server"
msgstr "Adăugare server"

#: printer/printerdrake.pm:358
#, c-format
msgid "Edit selected server"
msgstr "Editare server selectat"

#: printer/printerdrake.pm:367
#, c-format
msgid "Remove selected server"
msgstr "Şterge serverul selectat"

#: printer/printerdrake.pm:411
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
"Introduceţi adresa IP şi portul gazdei a cărui imprimante doriţi să le "
"utilizaţi."

#: printer/printerdrake.pm:412
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:416
#, c-format
msgid "Server IP missing!"
msgstr "Lipseşte IP-ul serverului"

#: printer/printerdrake.pm:422
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Adresa IP introdusă nu este corectă.\n"

#: printer/printerdrake.pm:434 printer/printerdrake.pm:1852
#, c-format
msgid "The port number should be an integer!"
msgstr ""

#: printer/printerdrake.pm:445
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:456 printer/printerdrake.pm:1873
#: standalone/drakups:247 standalone/harddrake2:50
#, c-format
msgid "Port"
msgstr "Port"

#: printer/printerdrake.pm:489 printer/printerdrake.pm:505
#: printer/printerdrake.pm:520 printer/printerdrake.pm:524
#: printer/printerdrake.pm:530
#, fuzzy, c-format
msgid "On, Name or IP of remote server:"
msgstr "Imprimantă conectată la server lpd:"

#: printer/printerdrake.pm:508 printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366
#, c-format
msgid "CUPS server name or IP address missing."
msgstr ""

#: printer/printerdrake.pm:560 printer/printerdrake.pm:580
#: printer/printerdrake.pm:673 printer/printerdrake.pm:739
#: printer/printerdrake.pm:766 printer/printerdrake.pm:825
#: printer/printerdrake.pm:867 printer/printerdrake.pm:877
#: printer/printerdrake.pm:1926 printer/printerdrake.pm:2137
#: printer/printerdrake.pm:2169 printer/printerdrake.pm:2217
#: printer/printerdrake.pm:2269 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2330 printer/printerdrake.pm:2370
#: printer/printerdrake.pm:2420 printer/printerdrake.pm:2454
#: printer/printerdrake.pm:2464 printer/printerdrake.pm:2714
#: printer/printerdrake.pm:2719 printer/printerdrake.pm:2856
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3560
#: printer/printerdrake.pm:3625 printer/printerdrake.pm:3674
#: printer/printerdrake.pm:3677 printer/printerdrake.pm:3808
#: printer/printerdrake.pm:3908 printer/printerdrake.pm:3980
#: printer/printerdrake.pm:4001 printer/printerdrake.pm:4010
#: printer/printerdrake.pm:4104 printer/printerdrake.pm:4196
#: printer/printerdrake.pm:4202 printer/printerdrake.pm:4222
#: printer/printerdrake.pm:4328 printer/printerdrake.pm:4435
#: printer/printerdrake.pm:4454 printer/printerdrake.pm:4463
#: printer/printerdrake.pm:4477 printer/printerdrake.pm:4673
#: printer/printerdrake.pm:5109 printer/printerdrake.pm:5186
#: standalone/printerdrake:67 standalone/printerdrake:554
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:561 printer/printerdrake.pm:3909
#: printer/printerdrake.pm:4436
#, c-format
msgid "Reading printer data..."
msgstr "Citesc datele despre imprimante..."

#: printer/printerdrake.pm:581
#, c-format
msgid "Restarting CUPS..."
msgstr "Repornesc CUPS..."

#: printer/printerdrake.pm:608 printer/printerdrake.pm:628
#, c-format
msgid "Select Printer Connection"
msgstr "Selectaţi Conexiunea de imprimantă"

#: printer/printerdrake.pm:609
#, c-format
msgid "How is the printer connected?"
msgstr "Cum e conectată imprimanta ?"

#: printer/printerdrake.pm:611
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""

#: printer/printerdrake.pm:614 printer/printerdrake.pm:4675
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:621
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:623
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:629
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:631
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:635
#, fuzzy, c-format
msgid "The timeout must be a positive integer number!"
msgstr "ID-ul utilizatorului trebuie să fie un număr pozitiv"

#: printer/printerdrake.pm:673
#, c-format
msgid "Checking your system..."
msgstr "Verific sistemul dvs..."

#: printer/printerdrake.pm:690
#, c-format
msgid "and one unknown printer"
msgstr "şi o imprimantă necunoscută"

#: printer/printerdrake.pm:692
#, c-format
msgid "and %d unknown printers"
msgstr "şi %d imprimante necunoscute"

#: printer/printerdrake.pm:696
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Imprimantele\n"
"\n"
"%s%s\n"
"sunt conectate direct la sistemul dvs."

#: printer/printerdrake.pm:698
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Imprimantele\n"
"\n"
"%s%s\n"
"sunt conectate direct la sistemul dvs."

#: printer/printerdrake.pm:699
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Imprimanta\n"
"\n"
"%s%s\n"
"este conectată direct la sistemul dvs."

#: printer/printerdrake.pm:703
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:704
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:707
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:710
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""

#: printer/printerdrake.pm:723
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:724
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:726
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr ""

#: printer/printerdrake.pm:727
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:728
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:767
#, c-format
msgid "Searching for new printers..."
msgstr "Caut noi imprimante..."

#: printer/printerdrake.pm:826
#, fuzzy, c-format
msgid "Found printer on %s..."
msgstr "Şterg imprimanta \"%s\"..."

#: printer/printerdrake.pm:851
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:852
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:853 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:858 printer/printerdrake.pm:2868
#, c-format
msgid "Printer model selection"
msgstr "Selectare model imprimantă"

#: printer/printerdrake.pm:859 printer/printerdrake.pm:2869
#, c-format
msgid "Which printer model do you have?"
msgstr "Ce model de imprimanta aveţi?"

#: printer/printerdrake.pm:860
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:863 printer/printerdrake.pm:2874
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:868
#, fuzzy, c-format
msgid "Configuring printer on %s..."
msgstr "Configurez imprimanta \"%s\"..."

#: printer/printerdrake.pm:878 printer/printerdrake.pm:4455
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Configurez imprimanta \"%s\"..."

#: printer/printerdrake.pm:1036 printer/printerdrake.pm:1048
#: printer/printerdrake.pm:1107 printer/printerdrake.pm:2103
#: printer/printerdrake.pm:2118 printer/printerdrake.pm:2188
#: printer/printerdrake.pm:4692 printer/printerdrake.pm:4861
#, c-format
msgid "Add a new printer"
msgstr "Adaugă o imprimantă nouă"

#: printer/printerdrake.pm:1037
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Bun venit la asistentul de configurare a imprimantelor\n"
"\n"
"Acest asistent permite instalarea imprimantelor locale sau la distanţă "
"pentru a putea fi folosite de pe acest calculator sau de alte calculatoare "
"din reţea.\n"
"\n"
"Veţi putea introduce toate informaţiile necesare pentru configurarea "
"imprimantelor şi veţi avea acces la driverele de imprimantă, opţiunile de "
"imprimare şi tipurile de conexiune."

#: printer/printerdrake.pm:1050
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1059
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1067
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1076
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1085
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Autodetectare imprimante conectate direct la această maşină"

#: printer/printerdrake.pm:1088
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "Autodetectare imprimante conectate direct la reţeaua locală"

#: printer/printerdrake.pm:1091
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Autodetectare imprimante conectate la maşini ce rulează Microsoft Windows"

#: printer/printerdrake.pm:1108
#, fuzzy, c-format
msgid "No auto-detection"
msgstr "Auto-detecţie"

#: printer/printerdrake.pm:1173
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1143 printer/printerdrake.pm:1373
#: printer/printerdrake.pm:1435 printer/printerdrake.pm:1525
#: printer/printerdrake.pm:1663 printer/printerdrake.pm:1738
#: printer/printerdrake.pm:1890 printer/printerdrake.pm:1976
#: printer/printerdrake.pm:1985 printer/printerdrake.pm:1994
#: printer/printerdrake.pm:2005 printer/printerdrake.pm:2143
#: printer/printerdrake.pm:2229 printer/printerdrake.pm:2275
#: printer/printerdrake.pm:2342 printer/printerdrake.pm:2377
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "Instalarea pachetului  %s"

#: printer/printerdrake.pm:1145
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1151 printer/printerdrake.pm:1296
#: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785
#, c-format
msgid "Printer auto-detection"
msgstr "Auto-detecţie imprimantă"

#: printer/printerdrake.pm:1151
#, c-format
msgid "Detecting devices..."
msgstr "Detecţia perifericelor..."

#: printer/printerdrake.pm:1181
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1184
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1188
#, c-format
msgid "Detected %s"
msgstr "Am detectat %s"

#: printer/printerdrake.pm:1193 printer/printerdrake.pm:1220
#: printer/printerdrake.pm:1238
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Imprimantă pe portul paralel #%s"

#: printer/printerdrake.pm:1199
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1202
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1283
#, c-format
msgid "Local Printer"
msgstr "Imprimantă locală"

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1288
#, c-format
msgid "You must enter a device or file name!"
msgstr ""

#: printer/printerdrake.pm:1297
#, c-format
msgid "No printer found!"
msgstr "Nu am găsit nici o imprimantă!"

#: printer/printerdrake.pm:1305
#, c-format
msgid "Local Printers"
msgstr "Imprimante locale"

#: printer/printerdrake.pm:1306
#, c-format
msgid "Available printers"
msgstr "Imprimante disponibile"

#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1319
#, c-format
msgid "The following printer was auto-detected. "
msgstr "A fost detectată următoarea imprimantă"

#: printer/printerdrake.pm:1312
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1313
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1314 printer/printerdrake.pm:1323
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1316
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1317
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1321
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1322
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1325
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1326
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Vă rog să specificaţi la ce imprimantă vor fi trimise lucrările."

#: printer/printerdrake.pm:1328
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1329
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr ""
"Vă rog să specificaţi la ce port este conectată imprimanta dumneavoastră."

#: printer/printerdrake.pm:1331
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1335
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr ""

#: printer/printerdrake.pm:1375 printer/printerdrake.pm:1437
#: printer/printerdrake.pm:1527 printer/printerdrake.pm:1665
#: printer/printerdrake.pm:1740 printer/printerdrake.pm:1892
#: printer/printerdrake.pm:1978 printer/printerdrake.pm:1987
#: printer/printerdrake.pm:1996 printer/printerdrake.pm:2007
#, fuzzy, c-format
msgid "Aborting"
msgstr "Abandonează"

#: printer/printerdrake.pm:1410
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opţiuni pentru imprimanta lpd la distanţă"

#: printer/printerdrake.pm:1411
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Pentru a folosi a coadă de imprimare lpd la distanţă, trebuie să furnizaţi\n"
"numele calculatorului serverului de imprimantă şi numele imprimantei de pe "
"server."

#: printer/printerdrake.pm:1412
#, c-format
msgid "Remote host name"
msgstr "Nume gazdă la distanţă"

#: printer/printerdrake.pm:1413
#, c-format
msgid "Remote printer name"
msgstr "Nume imprimantă la distanţă"

#: printer/printerdrake.pm:1416
#, c-format
msgid "Remote host name missing!"
msgstr ""

#: printer/printerdrake.pm:1420
#, c-format
msgid "Remote printer name missing!"
msgstr ""

#: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025
#: standalone/drakTermServ:445 standalone/drakTermServ:747
#: standalone/drakTermServ:764 standalone/drakTermServ:1480
#: standalone/drakTermServ:1488 standalone/drakTermServ:1500
#: standalone/drakbackup:512 standalone/drakbackup:618
#: standalone/drakbackup:653 standalone/drakbackup:773
#: standalone/harddrake2:256
#, c-format
msgid "Information"
msgstr "Informaţii"

#: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025
#, c-format
msgid "Detected model: %s %s"
msgstr "Model detectat: %s %s"

#: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785
#, c-format
msgid "Scanning network..."
msgstr "Scanare reţea..."

#: printer/printerdrake.pm:1543 printer/printerdrake.pm:1564
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", imprimanta \"%s\" pe serverul \"%s\""

#: printer/printerdrake.pm:1546 printer/printerdrake.pm:1567
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Imprimanta \"%s\" pe serverul \"%s\""

#: printer/printerdrake.pm:1588
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opţiuni pentru imprimanta SMB/Windows 95/NT"

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Pentru a imprima  pe o imprimantă SMB, trebuie să furnizaţi\n"
"numele calculatorului SMB (acesta nu este întotdeauna numele maşinii\n"
"TCP/IP) si probabil adresa IP a serverului de imprimantă, cît şi \n"
"numele de access şi numele de utilizator, parola şi informaţia grupului de "
"lucru."

#: printer/printerdrake.pm:1590
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1592
#, c-format
msgid "SMB server host"
msgstr "Numele serverului SMB"

#: printer/printerdrake.pm:1593
#, c-format
msgid "SMB server IP"
msgstr "Adresa IP a serverului SMB"

#: printer/printerdrake.pm:1594
#, c-format
msgid "Share name"
msgstr "Numele de access"

#: printer/printerdrake.pm:1597
#, c-format
msgid "Workgroup"
msgstr "Numele de grup"

#: printer/printerdrake.pm:1599
#, c-format
msgid "Auto-detected"
msgstr "Auto-detectat"

#: printer/printerdrake.pm:1609
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1613
#, c-format
msgid "Samba share name missing!"
msgstr "Lipseşte numele obiectului partajat Samba"

#: printer/printerdrake.pm:1619
#, c-format
msgid "SECURITY WARNING!"
msgstr "AVERTIZARE DE SECURITATE!"

#: printer/printerdrake.pm:1620
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1630
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1633
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1711
#, c-format
msgid "NetWare Printer Options"
msgstr "Opţiunei imprimantă NetWare"

#: printer/printerdrake.pm:1712
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Pentru a tipări pe o imprimantă NetWare, trebuie să furnizaţi\n"
"numele serverului NetWare (nu e întotdeauna acelaşi cu cel TCP/IP)\n"
"cît şi numele listei de aşteptare şi eventual utilizatorii care vor avea\n"
"access şi parolele."

#: printer/printerdrake.pm:1713
#, c-format
msgid "Printer Server"
msgstr "Server de imprimantă"

#: printer/printerdrake.pm:1714
#, c-format
msgid "Print Queue Name"
msgstr "Nume coadă de imprimare"

#: printer/printerdrake.pm:1719
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1723
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:1797 printer/printerdrake.pm:1817
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1800 printer/printerdrake.pm:1820
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1841
#, c-format
msgid "TCP/Socket Printer Options"
msgstr ""

#: printer/printerdrake.pm:1843
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:1844
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""

#: printer/printerdrake.pm:1848
#, c-format
msgid "Printer host name or IP missing!"
msgstr ""

#: printer/printerdrake.pm:1871
#, c-format
msgid "Printer host name or IP"
msgstr ""

#: printer/printerdrake.pm:1927
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "Actualizare listă utilizatori"

#: printer/printerdrake.pm:1930 printer/printerdrake.pm:1932
#, c-format
msgid "Printer Device URI"
msgstr ""

#: printer/printerdrake.pm:1931
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:1957
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:2060
#, c-format
msgid "Pipe into command"
msgstr "Pipe în comanda"

#: printer/printerdrake.pm:2061
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2062
#, c-format
msgid "Command line"
msgstr "Linia de comandă"

#: printer/printerdrake.pm:2066
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:2104
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2106
#, c-format
msgid ""
"To access these extra functions on your HP printer, it must be set up with "
"the appropriate software: "
msgstr ""

#: printer/printerdrake.pm:2107
#, c-format
msgid ""
"Either with the newer HPLIP which allows printer maintenance through the "
"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
"newer PhotoSmart models "
msgstr ""

#: printer/printerdrake.pm:2108
#, c-format
msgid ""
"or with the older HPOJ which allows only scanner and memory card access, but "
"could help you in case of failure of HPLIP. "
msgstr ""

#: printer/printerdrake.pm:2110
#, c-format
msgid "What is your choice (choose \"None\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2111 printer/printerdrake.pm:2112
#: printer/printerdrake.pm:2138 printer/printerdrake.pm:2144
#: printer/printerdrake.pm:2170
#, fuzzy, c-format
msgid "HPLIP"
msgstr "PL_IP"

#: printer/printerdrake.pm:2111 printer/printerdrake.pm:2114
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2276
#: printer/printerdrake.pm:2287
#, c-format
msgid "HPOJ"
msgstr ""

#: printer/printerdrake.pm:2119
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: printer/printerdrake.pm:2138 printer/printerdrake.pm:2270
#, c-format
msgid "Installing %s package..."
msgstr "Instalare pachete %s..."

#: printer/printerdrake.pm:2145 printer/printerdrake.pm:2277
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2160
#, fuzzy, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr ""
"Nu am reuşit să creez un director de configurare Gnome specific "
"utilizatorului „%s”: %s\n"

#: printer/printerdrake.pm:2162
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2170 printer/printerdrake.pm:2287
#, c-format
msgid "Checking device and configuring %s..."
msgstr ""

#: printer/printerdrake.pm:2189
#, fuzzy, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "La ce sector doriţi să mutaţi?"

#: printer/printerdrake.pm:2218 printer/printerdrake.pm:2331
#, c-format
msgid "Installing SANE packages..."
msgstr "Instalare pachete SANE..."

#: printer/printerdrake.pm:2231 printer/printerdrake.pm:2344
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2246
#, fuzzy, c-format
msgid "Using and Maintaining your %s"
msgstr "Trimit articolul \"%s\", inclusiv prin email"

#: printer/printerdrake.pm:2371
#, c-format
msgid "Installing mtools packages..."
msgstr "Instalare pachete mtools..."

#: printer/printerdrake.pm:2379
#, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2395
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2404
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2421
#, fuzzy, c-format
msgid "Configuring device..."
msgstr "Configurez..."

#: printer/printerdrake.pm:2455
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2464 printer/printerdrake.pm:2715
#: printer/printerdrake.pm:2857
#, c-format
msgid "Reading printer database..."
msgstr "Citesc baza de date a imprimantelor..."

#: printer/printerdrake.pm:2674
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2678 printer/printerdrake.pm:3965
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: printer/printerdrake.pm:2684 printer/printerdrake.pm:3970
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: printer/printerdrake.pm:2691
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""

#: printer/printerdrake.pm:2700
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: printer/printerdrake.pm:2701
#, c-format
msgid "Name of printer"
msgstr "Nume imprimantă"

#: printer/printerdrake.pm:2702 standalone/drakconnect:570
#: standalone/harddrake2:37 standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Description"
msgstr "Descriere"

#: printer/printerdrake.pm:2703 standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Location"
msgstr "Locaţie"

#: printer/printerdrake.pm:2720
#, c-format
msgid "Preparing printer database..."
msgstr ""

#: printer/printerdrake.pm:2836
#, c-format
msgid "Your printer model"
msgstr "Modelul dvs. de imprimantă"

#: printer/printerdrake.pm:2837
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:2842 printer/printerdrake.pm:2845
#, c-format
msgid "The model is correct"
msgstr "Modelul este corect"

#: printer/printerdrake.pm:2843 printer/printerdrake.pm:2844
#: printer/printerdrake.pm:2847
#, c-format
msgid "Select model manually"
msgstr "Selectare manuală model"

#: printer/printerdrake.pm:2870
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:2889
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:2920
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:2921
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:2922
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:2923
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:2924
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:2925
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:2927
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "Instalare rpm"

#: printer/printerdrake.pm:2930 printer/printerdrake.pm:2938
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "Unităţi de dischete"

#: printer/printerdrake.pm:2931 printer/printerdrake.pm:2940
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, fuzzy, c-format
msgid "Other place"
msgstr "Alte porturi"

#: printer/printerdrake.pm:2946
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "Selectează fişierul"

#: printer/printerdrake.pm:2950
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:2956
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:2967
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "Instalez %s..."

#: printer/printerdrake.pm:3084
#, c-format
msgid "OKI winprinter configuration"
msgstr ""

#: printer/printerdrake.pm:3085
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3110 printer/printerdrake.pm:3140
#, c-format
msgid "Lexmark inkjet configuration"
msgstr ""

#: printer/printerdrake.pm:3111
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3141
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3151
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "Configurare alertare"

#: printer/printerdrake.pm:3152
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:3174
#, fuzzy, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "Configurare sunet"

#: printer/printerdrake.pm:3175 printer/printerdrake.pm:3202
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:3201
#, fuzzy, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "Configurare manuală"

#: printer/printerdrake.pm:3220
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3369
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3494
#, c-format
msgid "Printer default settings"
msgstr "Opţiuni implicite imprimantă"

#: printer/printerdrake.pm:3501
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: printer/printerdrake.pm:3505
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: printer/printerdrake.pm:3509
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3560
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""

#: printer/printerdrake.pm:3575
#, c-format
msgid "Test pages"
msgstr "Pagini de test"

#: printer/printerdrake.pm:3576
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3580
#, c-format
msgid "No test pages"
msgstr "Fără pagini de test"

#: printer/printerdrake.pm:3581
#, c-format
msgid "Print"
msgstr "Tipăreşte"

#: printer/printerdrake.pm:3606
#, c-format
msgid "Standard test page"
msgstr "Pagină de test standard"

#: printer/printerdrake.pm:3609
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Pagină de test alternativă (Letter)"

#: printer/printerdrake.pm:3612
#, c-format
msgid "Alternative test page (A4)"
msgstr "Pagină de test alternativă (A4)"

#: printer/printerdrake.pm:3614
#, c-format
msgid "Photo test page"
msgstr "Pagină de test Fotografie"

#: printer/printerdrake.pm:3618
#, c-format
msgid "Do not print any test page"
msgstr "Nu tipări nici o pagină de test"

#: printer/printerdrake.pm:3626 printer/printerdrake.pm:3809
#, c-format
msgid "Printing test page(s)..."
msgstr "Imprimarea pagin(ei/lor) de test"

#: printer/printerdrake.pm:3646
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "Pagină de test Fotografie"

#: printer/printerdrake.pm:3663
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Pagin(a/ile) de test a/au fost trimisă la imprimantă.\n"
"Aceasta va dura puţin timp înaintea pornirii imprimării\n"
"Starea tipăririi:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3667
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""

#: printer/printerdrake.pm:3677
#, c-format
msgid "Did it work properly?"
msgstr "A funcţionat corect?"

#: printer/printerdrake.pm:3700 printer/printerdrake.pm:5049
#, c-format
msgid "Raw printer"
msgstr "Imprimantă brută"

#: printer/printerdrake.pm:3738
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:3740
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3743 printer/printerdrake.pm:3760
#: printer/printerdrake.pm:3770
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:3746 printer/printerdrake.pm:3786
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3750
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3755 printer/printerdrake.pm:3765
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Pentru a imprima un fişier de la linia de comandă (fereastră terminal) "
"folosiţi comanda \"%s <fişier>\".\n"

#: printer/printerdrake.pm:3757 printer/printerdrake.pm:3767
#: printer/printerdrake.pm:3777
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3762 printer/printerdrake.pm:3772
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: printer/printerdrake.pm:3775
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3779
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:3783
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3793
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3794
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3796
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3798
#, fuzzy, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "Trimit articolul \"%s\", inclusiv prin email"

#: printer/printerdrake.pm:3799
#, c-format
msgid "Printing on the printer \"%s\""
msgstr ""

#: printer/printerdrake.pm:3805
#, c-format
msgid "Print option list"
msgstr "Listă opţiuni tipărire"

#: printer/printerdrake.pm:3827
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3830
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:3831
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share "
"your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3835
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""

#: printer/printerdrake.pm:3836
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3838
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3842
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3843
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:3844
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:3845
#, fuzzy, c-format
msgid " - Print head alignment\n"
msgstr "Administrare imprimare \n"

#: printer/printerdrake.pm:3846
#, fuzzy, c-format
msgid " - Color calibration\n"
msgstr "Configurare culori"

#: printer/printerdrake.pm:3861
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"You do not need to run \"scannerdrake\" for setting up scanning on this "
"device, you only need to use \"scannerdrake\" if you want to share the "
"scanner on the network."
msgstr ""

#: printer/printerdrake.pm:3887
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: printer/printerdrake.pm:3929 printer/printerdrake.pm:3956
#: printer/printerdrake.pm:3991
#, c-format
msgid "Transfer printer configuration"
msgstr ""

#: printer/printerdrake.pm:3930
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:3933
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:3935
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:3937
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:3939
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:3940
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:3941
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: printer/printerdrake.pm:3944
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: printer/printerdrake.pm:3945 printer/printerdrake.pm:3961
#, c-format
msgid "Transfer"
msgstr "Transferă"

#: printer/printerdrake.pm:3957
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:3978
#, c-format
msgid "New printer name"
msgstr "Nume imprimantă nouă"

#: printer/printerdrake.pm:3981
#, c-format
msgid "Transferring %s..."
msgstr "Transfer %s..."

#: printer/printerdrake.pm:3992
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4002
#, c-format
msgid "Refreshing printer data..."
msgstr ""

#: printer/printerdrake.pm:4011
#, c-format
msgid "Starting network..."
msgstr "Pornire reţea..."

#: printer/printerdrake.pm:4054 printer/printerdrake.pm:4058
#: printer/printerdrake.pm:4060
#, c-format
msgid "Configure the network now"
msgstr "Configurează reţeaua acum "

#: printer/printerdrake.pm:4055
#, c-format
msgid "Network functionality not configured"
msgstr "Funcţionalitatea reţelei nu este configurată"

#: printer/printerdrake.pm:4056
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:4059
#, c-format
msgid "Go on without configuring the network"
msgstr "Continuă cu configurarea reţelei"

#: printer/printerdrake.pm:4094
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""

#: printer/printerdrake.pm:4095
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:4105
#, c-format
msgid "Restarting printing system..."
msgstr ""

#: printer/printerdrake.pm:4135
#, c-format
msgid "high"
msgstr "Înaltă"

#: printer/printerdrake.pm:4135
#, c-format
msgid "paranoid"
msgstr "Paranoică"

#: printer/printerdrake.pm:4137
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: printer/printerdrake.pm:4138
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:4173
#, c-format
msgid "Starting the printing system at boot time"
msgstr ""

#: printer/printerdrake.pm:4174
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:4196
#, c-format
msgid "Checking installed software..."
msgstr ""

#: printer/printerdrake.pm:4202
#, c-format
msgid "Removing %s..."
msgstr "Şterg %s..."

#: printer/printerdrake.pm:4206
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "Schimbă sistemul de tipărire"

#: printer/printerdrake.pm:4222
#, c-format
msgid "Installing %s..."
msgstr "Instalez %s..."

#: printer/printerdrake.pm:4226
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "Schimbă sistemul de tipărire"

#: printer/printerdrake.pm:4293
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4295
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4309
#, fuzzy, c-format
msgid "Name or IP of remote server:"
msgstr "Imprimantă conectată la server lpd:"

#: printer/printerdrake.pm:4329
#, c-format
msgid "Setting Default Printer..."
msgstr "Setez imprimanta implicită..."

#: printer/printerdrake.pm:4348
#, fuzzy, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "Imprimantă conectată la server CUPS"

#: printer/printerdrake.pm:4349
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:4351
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:4352
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4353
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4355
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4356
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4357
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4359
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4363 printer/printerdrake.pm:4378
#: printer/printerdrake.pm:4382 printer/printerdrake.pm:4388
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4377
#, fuzzy, c-format
msgid "Local CUPS printing system"
msgstr "Configurează sistemul de tipărire CUPS"

#: printer/printerdrake.pm:4415
#, c-format
msgid "Select Printer Spooler"
msgstr ""

#: printer/printerdrake.pm:4416
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr ""

#: printer/printerdrake.pm:4464
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Nu am putut configura imprimanta \"%s\"!"

#: printer/printerdrake.pm:4478
#, c-format
msgid "Installing Foomatic..."
msgstr ""

#: printer/printerdrake.pm:4484
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4674
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""

#: printer/printerdrake.pm:4704
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: printer/printerdrake.pm:4705
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: printer/printerdrake.pm:4716
#, c-format
msgid "CUPS configuration"
msgstr "Configurare CUPS"

#: printer/printerdrake.pm:4728
#, c-format
msgid "Change the printing system"
msgstr "Schimbă sistemul de tipărire"

#: printer/printerdrake.pm:4737
#, c-format
msgid "Normal Mode"
msgstr "Mod normal"

#: printer/printerdrake.pm:4738
#, c-format
msgid "Expert Mode"
msgstr "Mod expert"

#: printer/printerdrake.pm:4992 printer/printerdrake.pm:5050
#: printer/printerdrake.pm:5128 printer/printerdrake.pm:5137
#, c-format
msgid "Printer options"
msgstr "Opţiuni imprimantă"

#: printer/printerdrake.pm:5028
#, c-format
msgid "Modify printer configuration"
msgstr ""

#: printer/printerdrake.pm:5030
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""

#: printer/printerdrake.pm:5035
#, fuzzy, c-format
msgid "This printer is disabled"
msgstr "Dimensiunea acestei partiţii nu poate fi modificată"

#: printer/printerdrake.pm:5037
#, c-format
msgid "Do it!"
msgstr "Fă-o"

#: printer/printerdrake.pm:5042 printer/printerdrake.pm:5097
#, c-format
msgid "Printer connection type"
msgstr ""

#: printer/printerdrake.pm:5043 printer/printerdrake.pm:5103
#, c-format
msgid "Printer name, description, location"
msgstr ""

#: printer/printerdrake.pm:5045 printer/printerdrake.pm:5121
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: printer/printerdrake.pm:5046 printer/printerdrake.pm:5122
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: printer/printerdrake.pm:5052 printer/printerdrake.pm:5132
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: printer/printerdrake.pm:5057 printer/printerdrake.pm:5138
#: printer/printerdrake.pm:5140
#, fuzzy, c-format
msgid "Enable Printer"
msgstr "Activare Server"

#: printer/printerdrake.pm:5060 printer/printerdrake.pm:5143
#: printer/printerdrake.pm:5145
#, fuzzy, c-format
msgid "Disable Printer"
msgstr "Dezactivare Server"

#: printer/printerdrake.pm:5061 printer/printerdrake.pm:5148
#, c-format
msgid "Print test pages"
msgstr "Tipărire pagini de test"

#: printer/printerdrake.pm:5062 printer/printerdrake.pm:5150
#, c-format
msgid "Learn how to use this printer"
msgstr ""

#: printer/printerdrake.pm:5063 printer/printerdrake.pm:5152
#, c-format
msgid "Remove printer"
msgstr "Şterge imprimanta"

#: printer/printerdrake.pm:5110
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Şterg imprimanta veche \"%s\"..."

#: printer/printerdrake.pm:5141
#, fuzzy, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "Imprimanta \"%s\" pe serverul \"%s\""

#: printer/printerdrake.pm:5146
#, fuzzy, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "Partajarea conexiunii la Internet este acum dezactivată."

#: printer/printerdrake.pm:5183
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Chiar doriţi să ştergeţi imprimanta \"%s\"?"

#: printer/printerdrake.pm:5187
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Şterg imprimanta \"%s\"..."

#: printer/printerdrake.pm:5211
#, c-format
msgid "Default printer"
msgstr "Imprimanta implicită"

#: printer/printerdrake.pm:5212
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: raid.pm:42
#, fuzzy, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "Nu pot adăuga partiţia la md%d _formatat_RAID"

#: raid.pm:144
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nu aveţi destule partiţii pentru nivelul RAID %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "Permite/interzice logarea de la distanţă ca root."

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "Permite/interzice logarea directă ca root."

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:213
#, c-format
msgid "Security Alerts:"
msgstr "Alertări de securitate:"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, c-format
msgid "Set the root umask."
msgstr "Configuraţi umask root."

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr "dacă este activat, verifică adăugarea/eliminarea fişierelor suid root."

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, c-format
msgid "Set the user umask."
msgstr "Setaţi umask utilizator."

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr "Permite logare de la distanţă ca root"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, c-format
msgid "Allow X Window connections"
msgstr "Permine conexiuni X Window"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, c-format
msgid "Chkconfig obey msec rules"
msgstr "Chkconfig respectă regulile msec"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, c-format
msgid "No password aging for"
msgstr "Parola nu expiră pentru"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, c-format
msgid "Password history length"
msgstr "Lungime istoric parolă"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, c-format
msgid "Root umask"
msgstr "Umask root"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr "Expirare shell"

#: security/l10n.pm:44
#, c-format
msgid "User umask"
msgstr "Umask utilizator"

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr "Verifică porturile deschise"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr "Raportează rezultatele verificării in syslog"

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Bun venit Piraţilor"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Redusă"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Ridicată"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Foarte ridicată"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Paranoică"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Va trebui să folosiţi acest nivel cu grijă. Aceasta face ca sistemul să fie\n"
"mai uşor de folosit, dar foarte sensibil: nu trebuie să fie folosit pentru "
"un\n"
"calculator conectat cu altele de pe Internet. Nu există nici o parolă de "
"acces."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Parolele sunt acum activate, dar utilizarea lui ca un calculator într-o "
"reţea tot nu recomandată."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Acesta este nivelul de securitate standard recomandat pentru un calculator "
"care va fi conectat ca un client la Internet."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Deja există unele restricţii şi în fiecare noapte sunt executate mai multe "
"verificări automate"

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Cu acest nivel de securitate, utilizarea acestui calculator ca server\n"
"devine posibilă. Securitatea este destul de ridicată pentru a folosi acest\n"
"sistem ca server care acceptă conexiuni de la mulţi clienţi. Notă: dacă "
"maşina este numai un client simplu la Internet, folosiţi un nivel mai scăzut."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Avem funcţionalităţile nivelului anterior de securitate, dar acum sistemul e "
"complet închis şi securitatea e la maximum."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "Opţiuni de bază DrakSec"

#: security/level.pm:56
#, c-format
msgid "Please choose the desired security level"
msgstr "Vă rog să alegeţi nivelul de securitate dorit"

#: security/level.pm:60
#, c-format
msgid "Security level"
msgstr "Nivel de securitate"

#: security/level.pm:62
#, c-format
msgid "Use libsafe for servers"
msgstr "Foloseşte libsafe pentru servere"

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"O bibliotecă ce protejează contra atacurilor tip buffer overflow şi format "
"string."

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Administrator de securitate (logare sau email)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Lansează sistemul de sunet ALSA (Advanced Linux Sound Architecture)"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron un orar de comandă periodică"

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd e folosit pentru a monitoriza bateria şi login-ul via syslog.\n"
"Poate de asemenea fi folosit pentru oprirea calculatorului dacă bateria e\n"
"slabă."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Execută comenzi programate de comanda at la timpul specificat la\n"
"demararea lui at şi lansează comenzi batch atunci cînd media de încărcare\n"
"e suficient de scăzută."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron e un program UNIX standard care execută programe-utilizator\n"
"specificate la intervale periodice. vixie cron adaugă o serie de "
"funcţionalităţi la bazicul cron UNIX, printre care o mai bună securitate şi\n"
"opţiuni de configurare mai avansate."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM adaugă suport mouse la aplicaţii text Linux ca Midnight Commander.\n"
"El permite de asemenea operaţii cu mouse-ul de copiere/lipire şi include\n"
"suportul meniurilor contextuale în consolă."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache e un server World Wide Web. E folosit pentru a servi fişiere HTML\n"
"şi CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Super-procesul Internet (numit în mod normal inetd) demarează o sumedenie\n"
"de servicii, incluzînd telnet, ftp, rsh şi rlogin. Dezactivarea lui telnet\n"
"dezactivează toate serviciile de care e responsabil."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Acest pachet încarcă harta de tastatură selectată ca în\n"
"/etc/sysconfig/keyboard. Aceasta poate fi selectată folosind kbdconfig.\n"
"Ar trebuie să-l lăsaţi activat pentru majoritatea calculatoarelor."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Regenerarea automata a antetelor nucleu în /boot pentru\n"
"/usr/include/linux/{autoconf, versiune}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Detecţia şi configurarea automată a echipamentelor la demaraj."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd este procesul de imprimare necesar pentru ca lpr să funcţioneze corect.\n"
"E un server care arbitrează activitatea imprimantei(lor)."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) este un server de nume de domeniu (DNS) folosit la rezolvarea "
"asocierii numelor cu adresele IP."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Montează şi demontează toate punctele de montare a Fişierelor sistem de "
"Reţea\n"
"(NFS), SMB (LanManager/Windows şi NCP (NetWare)."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Activează/Dezactivează toate interfeţele de reţea configurate pentru fi\n"
"iniţializate la demaraj."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS e un protocol popular pentru a împărţi fişiere de-a lungul reţelelor\n"
"TCP/IP. Acest serviciu furnizează funcţionalitatea server-ului NFS, care e\n"
"configurată via fişierului /etc/exports."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS e un protocol popular pentru a împărţi fişiere de-a lungul reţelelor\n"
"TCP/IP. Acest serviciu furnizează funcţionalitatea blocării fişierelor NFS."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"Suportul PCMCIA e destinat pentru a suporta cartele ethernet şi modem-uri\n"
"laptop-uri. Nu va demara decît dacă e configurat deci nu e nici o problemă\n"
"dacă e instalat pe calculatoare care nu au nevoie de acesta."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper-ul gestionează conexiunile RPC, care sunt folosite de "
"protocoluri\n"
"ca NFS şi NIS. Server-ul portmap trebuie demarat pe calculatoare care \n"
"funcţionează ca servere pentru protocoluri care folosesc mecanismul RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix est un Agent de Transport de Mail (MTA), care e programul care\n"
"permite deplasarea mail-ului de la un calculator la altul."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Salvează şi restaurează entropia sistemului pentru o mai mare calitate\n"
"a generării de numere aleatoare."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Serviciul de rutare permite actualizarea automată a tabelei IP de rutare\n"
"via\n"
" protocolul RIP. În timp de RIP este folosit pentru reţele mici,\n"
"alte protocoale mai complexe sunt folosite pentru reţele mai complexe."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Protocolul rstat permite utilizatorilor unei reţele să recupereze\n"
"performanţele măsurate de la orice calculator de pe reţea."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Protocolul rusers permite utilizatorilor unei reţele să identifice\n"
"cine e conectat la calculatoarele care răspund."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"Protocolul rwho permite utilizatorului să recupereze lista tuturor\n"
"utilizatorului conectaţi la un calculator care foloseşte procesul rwho\n"
"(similar cu finger)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Lansează sisemul de sunet pe maşina dvs."

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n"
"mesaje de log în numeroaselor fişiere de log ale sistemului. E o idee\n"
"bună să demaraţi întotdeauna syslog."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Încarcă driverele pentru dispozitivele USB."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr "Porneşte serverul de fonturi X (obligatoriu pentru rularea Xorg)"

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Alegeţi ce servicii doriţi să fie lansate automat la demaraj"

#: services.pm:127
#, c-format
msgid "Printing"
msgstr "Imprimare"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Internet"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr "Partajare fişiere"

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr "Administrare de la distanţă"

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr "Server de baze de date"

#: services.pm:209
#, c-format
msgid "running"
msgstr "rulează"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "oprit"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr "Servicii şi daemoni"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""

#: services.pm:224 ugtk2.pm:1010
#, c-format
msgid "Info"
msgstr "Info"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "La demaraj"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Porneşte"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Opreşte"

#: share/advertising/01.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr ""

#: share/advertising/01.pl:15
#, c-format
msgid "Welcome to <b>Mandrakelinux</b>!"
msgstr "Bun venit la <b>Mandrakelinux</b>!"

#: share/advertising/01.pl:17
#, c-format
msgid ""
"Mandrakelinux is a <b>Linux distribution</b> that comprises the core of the "
"system, called the <b>operating system</b> (based on the Linux kernel) "
"together with <b>a lot of applications</b> meeting every need you could even "
"think of."
msgstr ""

#: share/advertising/01.pl:19
#, c-format
msgid ""
"Mandrakelinux is the most <b>user-friendly</b> Linux distribution today. It "
"is also one of the <b>most widely used</b> Linux distributions worldwide!"
msgstr ""

#: share/advertising/02.pl:13
#, fuzzy, c-format
msgid "<b>Open Source</b>"
msgstr "<b>Servere</b>"

#: share/advertising/02.pl:15
#, fuzzy, c-format
msgid "Welcome to the <b>world of open source</b>!"
msgstr "Bine aţi venit în lumea Open Source (surse deschise)"

#: share/advertising/02.pl:17
#, c-format
msgid ""
"Mandrakelinux is committed to the open source model. This means that this "
"new release is the result of <b>collaboration</b> between <b>Mandrakesoft's "
"team of developers</b> and the <b>worldwide community</b> of Mandrakelinux "
"contributors."
msgstr ""

#: share/advertising/02.pl:19
#, c-format
msgid ""
"We would like to <b>thank</b> everyone who participated in the development "
"of this latest release."
msgstr ""

#: share/advertising/03.pl:13
#, c-format
msgid "<b>The GPL</b>"
msgstr ""

#: share/advertising/03.pl:15
#, c-format
msgid ""
"Most of the software included in the distribution and all of the "
"Mandrakelinux tools are licensed under the <b>General Public License</b>."
msgstr ""

#: share/advertising/03.pl:17
#, c-format
msgid ""
"The GPL is at the heart of the open source model; it grants everyone the "
"<b>freedom</b> to use, study, distribute and improve the software any way "
"they want, provided they make the results available."
msgstr ""

#: share/advertising/03.pl:19
#, c-format
msgid ""
"The main benefit of this is that the number of developers is virtually "
"<b>unlimited</b>, resulting in <b>very high quality</b> software."
msgstr ""

#: share/advertising/04.pl:13
#, c-format
msgid "<b>Join the Community</b>"
msgstr ""

#: share/advertising/04.pl:15
#, c-format
msgid ""
"Mandrakelinux has one of the <b>biggest communities</b> of users and "
"developers. The role of such a community is very wide, ranging from bug "
"reporting to the development of new applications. The community plays a "
"<b>key role</b> in the Mandrakelinux world."
msgstr ""

#: share/advertising/04.pl:17
#, c-format
msgid ""
"To <b>learn more</b> about our dynamic community, please visit <b>www."
"mandrakelinux.com</b> or directly <b>www.mandrakelinux.com/en/cookerdevel."
"php3</b> if you would like to get <b>involved</b> in the development."
msgstr ""

#: share/advertising/05.pl:13
#, c-format
msgid "<b>Download Version</b>"
msgstr ""

#: share/advertising/05.pl:15
#, c-format
msgid ""
"You are now installing <b>Mandrakelinux Download</b>. This is the free "
"version that Mandrakesoft wants to keep <b>available to everyone</b>."
msgstr ""

#: share/advertising/05.pl:17
#, c-format
msgid ""
"The Download version <b>cannot include</b> all the software that is not open "
"source. Therefore, you will not find in the Download version:"
msgstr ""

#: share/advertising/05.pl:18
#, c-format
msgid ""
"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
msgstr ""

#: share/advertising/05.pl:19
#, c-format
msgid ""
"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
"Flash™, etc.)."
msgstr ""

#: share/advertising/05.pl:21
#, c-format
msgid ""
"You will not have access to the <b>services included</b> in the other "
"Mandrakesoft products either."
msgstr ""

#: share/advertising/06.pl:13
#, c-format
msgid "<b>Discovery, Your First Linux Desktop</b>"
msgstr ""

#: share/advertising/06.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux Discovery</b>."
msgstr ""

#: share/advertising/06.pl:17
#, c-format
msgid ""
"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
"distribution. It includes a hand-picked selection of <b>premium software</b> "
"for office, multimedia and Internet activities. Its menu is task-oriented, "
"with a single application per task."
msgstr ""

#: share/advertising/07.pl:13
#, c-format
msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
msgstr ""

#: share/advertising/07.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack</b>."
msgstr ""

#: share/advertising/07.pl:17
#, c-format
msgid ""
"PowerPack is Mandrakesoft's <b>premier Linux desktop</b> product. PowerPack "
"includes <b>thousands of applications</b> - everything from the most popular "
"to the most advanced."
msgstr ""

#: share/advertising/08.pl:13
#, c-format
msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
msgstr ""

#: share/advertising/08.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack+</b>."
msgstr ""

#: share/advertising/08.pl:17
#, c-format
msgid ""
"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
"applications</b> and a comprehensive selection of world-class <b>server "
"applications</b>."
msgstr ""

#: share/advertising/09.pl:13
#, fuzzy, c-format
msgid "<b>Mandrakesoft Products</b>"
msgstr "Centrul de control Mandrakelinux"

#: share/advertising/09.pl:15
#, c-format
msgid ""
"<b>Mandrakesoft</b> has developed a wide range of <b>Mandrakelinux</b> "
"products."
msgstr ""

#: share/advertising/09.pl:17
#, fuzzy, c-format
msgid "The Mandrakelinux 10.1 products are:"
msgstr "Mandrakelinux Updates Applet"

#: share/advertising/09.pl:18
#, c-format
msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
msgstr ""

#: share/advertising/09.pl:19
#, c-format
msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
msgstr ""

#: share/advertising/09.pl:20
#, c-format
msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
msgstr ""

#: share/advertising/09.pl:21
#, c-format
msgid ""
"\t* <b>Mandrakelinux 10.1 for x86-64</b>, The Mandrakelinux solution for "
"making the most of your 64-bit processor."
msgstr ""

#: share/advertising/10.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Nomad Products)</b>"
msgstr ""

#: share/advertising/10.pl:15
#, c-format
msgid ""
"Mandrakesoft has developed two products that allow you to use Mandrakelinux "
"<b>on any computer</b> and without any need to actually install it:"
msgstr ""

#: share/advertising/10.pl:16
#, c-format
msgid ""
"\t* <b>Move</b>, a Mandrakelinux distribution that runs entirely from a "
"bootable CD-ROM."
msgstr ""

#: share/advertising/10.pl:17
#, c-format
msgid ""
"\t* <b>GlobeTrotter</b>, a Mandrakelinux distribution pre-installed on the "
"ultra-compact “LaCie Mobile Hard Drive”."
msgstr ""

#: share/advertising/11.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Professional Solutions)</b>"
msgstr ""

#: share/advertising/11.pl:15
#, c-format
msgid ""
"Below are the Mandrakesoft products designed to meet the <b>professional "
"needs</b>:"
msgstr ""

#: share/advertising/11.pl:16
#, c-format
msgid "\t* <b>Corporate Desktop</b>, The Mandrakelinux Desktop for Businesses."
msgstr ""

#: share/advertising/11.pl:17
#, c-format
msgid "\t* <b>Corporate Server</b>, The Mandrakelinux Server Solution."
msgstr ""

#: share/advertising/11.pl:18
#, c-format
msgid "\t* <b>Multi-Network Firewall</b>, The Mandrakelinux Security Solution."
msgstr ""

#: share/advertising/12.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr ""

#: share/advertising/12.pl:15
#, c-format
msgid ""
"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
"and user-friendly <b>graphical desktop environment</b> available."
msgstr ""

#: share/advertising/12.pl:17
#, c-format
msgid ""
"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
"will not ever think of running another operating system!"
msgstr ""

#: share/advertising/12.pl:19
#, c-format
msgid ""
"KDE also includes a lot of <b>well integrated applications</b> such as "
"Konqueror, the web browser and Kontact, the personal information manager."
msgstr ""

#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
#, fuzzy, c-format
msgid "<b>Choose your Favorite Desktop Environment</b>"
msgstr "Selectaţi cheia de criptare pt. sistemul de fişiere"

#: share/advertising/13-a.pl:15
#, c-format
msgid ""
"With PowerPack, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
#, c-format
msgid ""
"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
"desktop environment available. It includes a lot of integrated applications."
msgstr ""

#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
#, c-format
msgid ""
"But we advise you to try all available ones (including <b>GNOME</b>, "
"<b>IceWM</b>, etc.) and pick your favorite."
msgstr ""

#: share/advertising/13-b.pl:15
#, c-format
msgid ""
"With PowerPack+, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/14.pl:13
#, fuzzy, c-format
msgid "<b>OpenOffice.org</b>"
msgstr "OpenOffice.org Math"

#: share/advertising/14.pl:15
#, c-format
msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/14.pl:17
#, c-format
msgid ""
"It is a <b>full-featured office suite</b> that includes word processor, "
"spreadsheet, presentation and drawing applications."
msgstr ""

#: share/advertising/14.pl:19
#, c-format
msgid ""
"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
"documents such as Word, Excel and PowerPoint® files."
msgstr ""

#: share/advertising/15.pl:13
#, fuzzy, c-format
msgid "<b>Kontact</b>"
msgstr "<b>Mandrakeclub</b>"

#: share/advertising/15.pl:15
#, c-format
msgid ""
"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
msgstr ""

#: share/advertising/15.pl:17
#, c-format
msgid ""
"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
"b>!"
msgstr ""

#: share/advertising/15.pl:19
#, c-format
msgid ""
"It is the easiest way to communicate with your contacts and to organize your "
"time."
msgstr ""

#: share/advertising/16.pl:13
#, c-format
msgid "<b>Surf the Internet</b>"
msgstr "<b>Navigare pe Internet</b>"

#: share/advertising/16.pl:15
#, c-format
msgid "Discovery will give you access to <b>every Internet resource</b>:"
msgstr ""

#: share/advertising/16.pl:16
#, c-format
msgid "\t* Browse the <b>Web</b> with Konqueror."
msgstr ""

#: share/advertising/16.pl:17
#, c-format
msgid "\t* <b>Chat</b> online with your friends using Kopete."
msgstr ""

#: share/advertising/16.pl:18
#, fuzzy, c-format
msgid "\t* <b>Transfer</b> files with KBear."
msgstr "Transferă fişiere folosind FTP"

#: share/advertising/16.pl:19 share/advertising/17.pl:19
#: share/advertising/18.pl:22
#, c-format
msgid "\t* ..."
msgstr ""

#: share/advertising/17.pl:13
#, c-format
msgid "<b>Enjoy our Multimedia Features</b>"
msgstr ""

#: share/advertising/17.pl:15
#, c-format
msgid "Discovery will also make <b>multimedia</b> very easy for you:"
msgstr ""

#: share/advertising/17.pl:16
#, c-format
msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
msgstr ""

#: share/advertising/17.pl:17
#, c-format
msgid "\t* Listen to your <b>music files</b> with amaroK."
msgstr ""

#: share/advertising/17.pl:18
#, c-format
msgid "\t* Edit and create <b>images</b> with the GIMP."
msgstr ""

#: share/advertising/18.pl:13
#, c-format
msgid "<b>Enjoy the Wide Range of Applications</b>"
msgstr ""

#: share/advertising/18.pl:15
#, c-format
msgid ""
"In the Mandrakelinux menu you will find <b>easy-to-use</b> applications for "
"<b>all of your tasks</b>:"
msgstr ""

#: share/advertising/18.pl:16
#, c-format
msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/18.pl:17
#, c-format
msgid ""
"\t* Manage your personal data with the integrated personal information "
"suites <b>Kontact</b> and <b>Evolution</b>."
msgstr ""

#: share/advertising/18.pl:18
#, c-format
msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
msgstr ""

#: share/advertising/18.pl:19
#, c-format
msgid "\t* Participate in online chat with <b>Kopete</b>."
msgstr ""

#: share/advertising/18.pl:20
#, c-format
msgid ""
"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
"<b>videos</b>."
msgstr ""

#: share/advertising/18.pl:21
#, c-format
msgid "\t* Edit and create images with the <b>GIMP</b>."
msgstr ""

#: share/advertising/19.pl:13
#, c-format
msgid "<b>Development Environments</b>"
msgstr "<b>Medii de programare</b>"

#: share/advertising/19.pl:15 share/advertising/22.pl:15
#, c-format
msgid ""
"PowerPack gives you the best tools to <b>develop</b> your own applications."
msgstr ""

#: share/advertising/19.pl:17
#, c-format
msgid ""
"You will enjoy the powerful, integrated development environment from KDE, "
"<b>KDevelop</b>, which will let you program in a lot of languages."
msgstr ""

#: share/advertising/19.pl:19
#, c-format
msgid ""
"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
"b>, the associated debugger."
msgstr ""

#: share/advertising/20.pl:13
#, fuzzy, c-format
msgid "<b>Development Editors</b>"
msgstr "Dezvoltare"

#: share/advertising/20.pl:15
#, c-format
msgid "PowerPack will let you choose between those <b>popular editors</b>:"
msgstr ""

#: share/advertising/20.pl:16
#, c-format
msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
msgstr ""

#: share/advertising/20.pl:17
#, c-format
msgid ""
"\t* <b>XEmacs</b>: another open source text editor and application "
"development system."
msgstr ""

#: share/advertising/20.pl:18
#, c-format
msgid ""
"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
msgstr ""

#: share/advertising/21.pl:13
#, fuzzy, c-format
msgid "<b>Development Languages</b>"
msgstr "Dezvoltare"

#: share/advertising/21.pl:15
#, c-format
msgid ""
"With all these <b>powerful tools</b>, you will be able to write applications "
"in <b>dozens of programming languages</b>:"
msgstr ""

#: share/advertising/21.pl:16
#, c-format
msgid "\t* The famous <b>C language</b>."
msgstr ""

#: share/advertising/21.pl:17
#, c-format
msgid "\t* Object oriented languages:"
msgstr ""

#: share/advertising/21.pl:18
#, c-format
msgid "\t\t* <b>C++</b>"
msgstr "\t\t* <b>C++</b>"

#: share/advertising/21.pl:19
#, c-format
msgid "\t\t* <b>Java™</b>"
msgstr "\t\t* <b>Java™</b>"

#: share/advertising/21.pl:20
#, fuzzy, c-format
msgid "\t* Scripting languages:"
msgstr "Manager de tipărire"

#: share/advertising/21.pl:21
#, c-format
msgid "\t\t* <b>Perl</b>"
msgstr "\t\t* <b>Perl</b>"

#: share/advertising/21.pl:22
#, c-format
msgid "\t\t* <b>Python</b>"
msgstr "\t\t* <b>Python</b>"

#: share/advertising/21.pl:23 share/advertising/28.pl:22
#, c-format
msgid "\t* And many more."
msgstr ""

#: share/advertising/22.pl:13
#, fuzzy, c-format
msgid "<b>Development Tools</b>"
msgstr "Dezvoltare"

#: share/advertising/22.pl:17
#, c-format
msgid ""
"With the powerful integrated development environment <b>KDevelop</b> and the "
"leading Linux compiler <b>GCC</b>, you will be able to create applications "
"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
msgstr ""

#: share/advertising/23.pl:13
#, fuzzy, c-format
msgid "<b>Groupware Server</b>"
msgstr "<b>Servere</b>"

#: share/advertising/23.pl:15
#, c-format
msgid ""
"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
"allow you to:"
msgstr ""

#: share/advertising/23.pl:16
#, c-format
msgid "\t* Send and receive your <b>e-mails</b>."
msgstr ""

#: share/advertising/23.pl:17
#, c-format
msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
msgstr ""

#: share/advertising/23.pl:18
#, c-format
msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
msgstr ""

#: share/advertising/24.pl:13
#, c-format
msgid "<b>Servers</b>"
msgstr "<b>Servere</b>"

#: share/advertising/24.pl:15
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/24.pl:16
#, c-format
msgid ""
"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
msgstr ""

#: share/advertising/24.pl:17
#, fuzzy, c-format
msgid "\t* <b>Apache</b>: The most widely used web server."
msgstr "Server Apache-World Wide Web "

#: share/advertising/24.pl:18
#, c-format
msgid ""
"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
"databases."
msgstr ""

#: share/advertising/24.pl:19
#, c-format
msgid ""
"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
"transparent version control system."
msgstr ""

#: share/advertising/24.pl:20
#, c-format
msgid ""
"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
msgstr ""

#: share/advertising/24.pl:21
#, c-format
msgid ""
"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
"servers."
msgstr ""

#: share/advertising/25.pl:13
#, c-format
msgid "<b>Mandrakelinux Control Center</b>"
msgstr "<b>Centrul de control Mandrakelinux</b>"

#: share/advertising/25.pl:15
#, c-format
msgid ""
"The <b>Mandrakelinux Control Center</b> is an essential collection of "
"Mandrakelinux-specific utilities designed to simplify the configuration of "
"your computer."
msgstr ""

#: share/advertising/25.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of <b>more than 60</b> handy "
"utilities for <b>easily configuring your system</b>: hardware devices, mount "
"points, network and Internet, security level of your computer, etc."
msgstr ""

#: share/advertising/26.pl:13
#, c-format
msgid "<b>The Open Source Model</b>"
msgstr ""

#: share/advertising/26.pl:15
#, c-format
msgid ""
"Like all computer programming, open source software <b>requires time and "
"people</b> for development. In order to respect the open source philosophy, "
"Mandrakesoft sells added value products and services to <b>keep improving "
"Mandrakelinux</b>. If you want to <b>support the open source philosophy</b> "
"and the development of Mandrakelinux, <b>please</b> consider buying one of "
"our products or services!"
msgstr ""

#: share/advertising/27.pl:13
#, fuzzy, c-format
msgid "<b>Online Store</b>"
msgstr "Centrul de control Mandrakelinux"

#: share/advertising/27.pl:15
#, c-format
msgid ""
"To learn more about Mandrakesoft products and services, you can visit our "
"<b>e-commerce platform</b>."
msgstr ""

#: share/advertising/27.pl:17
#, c-format
msgid "There you can find all our products, services and third-party products."
msgstr ""

#: share/advertising/27.pl:19
#, c-format
msgid ""
"This platform has just been <b>redesigned</b> to improve its efficiency and "
"usability."
msgstr ""

#: share/advertising/27.pl:21
#, c-format
msgid "Stop by today at <b>store.mandrakesoft.com</b>!"
msgstr ""

#: share/advertising/28.pl:13
#, c-format
msgid "<b>Mandrakeclub</b>"
msgstr "<b>Mandrakeclub</b>"

#: share/advertising/28.pl:15
#, c-format
msgid ""
"<b>Mandrakeclub</b> is the <b>perfect companion</b> to your Mandrakelinux "
"product.."
msgstr ""

#: share/advertising/28.pl:17
#, c-format
msgid ""
"Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:"
msgstr ""

#: share/advertising/28.pl:18
#, c-format
msgid ""
"\t* <b>Special discounts</b> on products and services of our online store "
"<b>store.mandrakesoft.com</b>."
msgstr ""

#: share/advertising/28.pl:19
#, c-format
msgid ""
"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
"drivers)."
msgstr ""

#: share/advertising/28.pl:20
#, c-format
msgid "\t* Participation in Mandrakelinux <b>user forums</b>."
msgstr ""

#: share/advertising/28.pl:21
#, c-format
msgid ""
"\t* <b>Early and privileged access</b>, before public release, to "
"Mandrakelinux <b>ISO images</b>."
msgstr ""

#: share/advertising/29.pl:13
#, c-format
msgid "<b>Mandrakeonline</b>"
msgstr "<b>Mandrakeonline</b>"

#: share/advertising/29.pl:15
#, c-format
msgid ""
"<b>Mandrakeonline</b> is a new premium service that Mandrakesoft is proud to "
"offer its customers!"
msgstr ""

#: share/advertising/29.pl:17
#, c-format
msgid ""
"Mandrakeonline provides a wide range of valuable services for <b>easily "
"updating</b> your Mandrakelinux systems:"
msgstr ""

#: share/advertising/29.pl:18
#, c-format
msgid "\t* <b>Perfect</b> system security (automated software updates)."
msgstr ""

#: share/advertising/29.pl:19
#, c-format
msgid ""
"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
"desktop)."
msgstr ""

#: share/advertising/29.pl:20
#, c-format
msgid "\t* Flexible <b>scheduled</b> updates."
msgstr ""

#: share/advertising/29.pl:21
#, c-format
msgid ""
"\t* Management of <b>all your Mandrakelinux systems</b> with one account."
msgstr ""

#: share/advertising/30.pl:13
#, c-format
msgid "<b>Mandrakeexpert</b>"
msgstr "<b>Mandrakeexpert</b>"

#: share/advertising/30.pl:15
#, c-format
msgid ""
"Do you require <b>assistance?</b> Meet Mandrakesoft's technical experts on "
"<b>our technical support platform</b> www.mandrakeexpert.com."
msgstr ""

#: share/advertising/30.pl:17
#, c-format
msgid ""
"Thanks to the help of <b>qualified Mandrakelinux experts</b>, you will save "
"a lot of time."
msgstr ""

#: share/advertising/30.pl:19
#, c-format
msgid ""
"For any question related to Mandrakelinux, you have the possibility to "
"purchase support incidents at <b>store.mandrakesoft.com</b>."
msgstr ""

#: share/compssUsers.pl:25
#, c-format
msgid "Office Workstation"
msgstr "Staţie de lucru de birou"

#: share/compssUsers.pl:27
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"Programe gen Office: procesoare de text (OpenOffice.org Writer, Kword), "
"calcul tabelar (OpenOffice.org Calc, Kspread), vizualizatoare de fişiere pdf "
"etc."

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Programe gen Office: procesoare de text (kword, abiword), calcul tabelar "
"(kspread, gnumeric), vizualizatoare de fişiere pdf etc."

#: share/compssUsers.pl:33
#, c-format
msgid "Game station"
msgstr "Staţie de lucru pt. jocuri"

#: share/compssUsers.pl:34
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Programe de amuzament: arcade, boards, strategie etc."

#: share/compssUsers.pl:37
#, c-format
msgid "Multimedia station"
msgstr "Staţie de lucru multimedia"

#: share/compssUsers.pl:38
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "Programe de editare/redare pt. sunet şi video"

#: share/compssUsers.pl:43
#, c-format
msgid "Internet station"
msgstr "Staţie de lucru în Internet"

#: share/compssUsers.pl:44
#, fuzzy, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Set de unelte pt. citire/trimitere poştă şi ştiri (pine, mutt, tin...) şi "
"navigare pe Web"

#: share/compssUsers.pl:49
#, c-format
msgid "Network Computer (client)"
msgstr "Calculator în reţea (client)"

#: share/compssUsers.pl:50
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "Clienţi pt. diverse protocoale, inclusiv ssh"

#: share/compssUsers.pl:54
#, c-format
msgid "Configuration"
msgstr "Configuraţie"

#: share/compssUsers.pl:55
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "Unelete pentru uşurarea configurării calculatorului dvs."

#: share/compssUsers.pl:59
#, c-format
msgid "Console Tools"
msgstr "Unelte consolă"

#: share/compssUsers.pl:60
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "Editoare, interpretoare, terminale, unelte fişiere"

#: share/compssUsers.pl:65 share/compssUsers.pl:165
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "Biblioteci de dezvoltare C şi C++, programe şi fişiere include"

#: share/compssUsers.pl:69 share/compssUsers.pl:169
#, c-format
msgid "Documentation"
msgstr "Documentaţie"

#: share/compssUsers.pl:70 share/compssUsers.pl:170
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "Cărţi şi HowTo despre Linux şi programele libere"

#: share/compssUsers.pl:74 share/compssUsers.pl:173
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:75 share/compssUsers.pl:174
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "Baza standard Linux. Sprijin pentru aplicaţii ale altora."

#: share/compssUsers.pl:85
#, c-format
msgid "Apache"
msgstr "Apache"

#: share/compssUsers.pl:88
#, fuzzy, c-format
msgid "Groupware"
msgstr "Grup"

#: share/compssUsers.pl:89
#, c-format
msgid "Kolab Server"
msgstr "Server Kolab"

#: share/compssUsers.pl:92 share/compssUsers.pl:133
#, c-format
msgid "Firewall/Router"
msgstr "Firewall/Router"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Internet gateway"
msgstr "Gateway Internet"

#: share/compssUsers.pl:96
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/Fişier/_Nou"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Postfix mail server, Inn news server"
msgstr "Server de poştă Postfix"

#: share/compssUsers.pl:100
#, fuzzy, c-format
msgid "Directory Server"
msgstr "Restaurează de pe CD"

#: share/compssUsers.pl:104
#, c-format
msgid "FTP Server"
msgstr "Server FTP"

#: share/compssUsers.pl:105
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:108
#, c-format
msgid "DNS/NIS"
msgstr "DNS/NIS"

#: share/compssUsers.pl:109
#, c-format
msgid "Domain Name and Network Information Server"
msgstr "Server nume de domeniu (DNS) şi NIS"

#: share/compssUsers.pl:112
#, fuzzy, c-format
msgid "File and Printer Sharing Server"
msgstr "Server de imprimantă"

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "Server SAMBA"

#: share/compssUsers.pl:116 share/compssUsers.pl:129
#, c-format
msgid "Database"
msgstr "Baze de date"

#: share/compssUsers.pl:117
#, fuzzy, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "Server de baze de date MySQL sau PostgreSQL"

#: share/compssUsers.pl:121
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:122
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: share/compssUsers.pl:125
#, c-format
msgid "Mail"
msgstr "Poştă"

#: share/compssUsers.pl:126
#, c-format
msgid "Postfix mail server"
msgstr "Server de poştă Postfix"

#: share/compssUsers.pl:130
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "Server de baze de date MySQL sau PostgreSQL"

#: share/compssUsers.pl:137
#, c-format
msgid "Network Computer server"
msgstr "Server în reţea"

#: share/compssUsers.pl:138
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Server NFS, SMB, Proxy, SSH"

#: share/compssUsers.pl:146
#, c-format
msgid "KDE Workstation"
msgstr "Staţie de lucru KDE"

#: share/compssUsers.pl:147
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"Mediul de birou K, mediul grafic de bază cu o colecţie de unelte asociate"

#: share/compssUsers.pl:151
#, c-format
msgid "GNOME Workstation"
msgstr "Staţie de lucru Gnome"

#: share/compssUsers.pl:152
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr "Un mediu grafic cu un set de aplicaţii prietenoase şi unelte de birou"

#: share/compssUsers.pl:155
#, c-format
msgid "Other Graphical Desktops"
msgstr "Alte desktopuri grafice"

#: share/compssUsers.pl:156
#, c-format
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"

#: share/compssUsers.pl:179
#, fuzzy, c-format
msgid "Utilities"
msgstr "Filipine"

#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381
#, c-format
msgid "SSH Server"
msgstr "Server SSH"

#: share/compssUsers.pl:186
#, fuzzy, c-format
msgid "Webmin"
msgstr "Webcam-uri"

#: share/compssUsers.pl:187
#, fuzzy, c-format
msgid "Webmin Remote Configuration Server"
msgstr "Configurare Mandrakelinux Terminal Server"

#: share/compssUsers.pl:191
#, fuzzy, c-format
msgid "Network Utilities/Monitoring"
msgstr "Monitorizare reţea"

#: share/compssUsers.pl:192
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:196
#, fuzzy, c-format
msgid "Mandrakesoft Wizards"
msgstr "Centrul de control Mandrakelinux"

#: share/compssUsers.pl:197
#, fuzzy, c-format
msgid "Wizards to configure server"
msgstr "Nu am putut configura imprimanta \"%s\"!"

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrakelinux tools\n"
"  --incident        - program should be one of mandrakelinux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrakelinux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[Tastatură]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=disp] [--update-sane=dir_sursă_sane] [--update-"
"usbtable] [--dynamic=disp]"

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:133
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:61
#, fuzzy, c-format
msgid "You need to reboot for changes to take effect"
msgstr ""
"Va trebui să redemaraţi pentru ca schimbările sa fie luate în considerare"

#: standalone/XFdrake:92
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Vă rog delogaţi-vă şi folosiţi Ctrl-Alt-BackSpace"

#: standalone/XFdrake:96
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:74
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:106 standalone/drakTermServ:112
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:123
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:129
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:211 standalone/drakTermServ:214
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "Configurare Mandrakelinux Terminal Server"

#: standalone/drakTermServ:220
#, c-format
msgid "Enable Server"
msgstr "Activare Server"

#: standalone/drakTermServ:226
#, c-format
msgid "Disable Server"
msgstr "Dezactivare Server"

#: standalone/drakTermServ:232
#, c-format
msgid "Start Server"
msgstr "Pornire Server"

#: standalone/drakTermServ:238
#, c-format
msgid "Stop Server"
msgstr "Oprire Server"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr "Imagini demaraj prin reţea"

#: standalone/drakTermServ:258
#, c-format
msgid "Add/Del Users"
msgstr "Adăugare/ştergere utilizatori"

#: standalone/drakTermServ:262
#, c-format
msgid "Add/Del Clients"
msgstr "Adăugare/ştergere clienţi"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "Imagini"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:289 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "Asistent iniţial"

#: standalone/drakTermServ:325 standalone/drakTermServ:326
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:332
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:377
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Lansează asistentul"

#: standalone/drakTermServ:392
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:420
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "Permite clienţi Thin"

#: standalone/drakTermServ:422
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:424
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:444
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:445 standalone/drakTermServ:747
#: standalone/drakTermServ:764
#, c-format
msgid "This will take a few minutes."
msgstr "Va dura câteva minute."

#: standalone/drakTermServ:449 standalone/drakTermServ:468
#, fuzzy, c-format
msgid "Done!"
msgstr "Gata"

#: standalone/drakTermServ:454
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:474
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:509
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Configurare Mandrakelinux Terminal Server"

#: standalone/drakTermServ:510
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:516
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:534
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:554
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:566
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:570
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:575
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:584
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:605
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:640
#, c-format
msgid "Boot Floppy"
msgstr "Dischetă de demaraj"

#: standalone/drakTermServ:642
#, c-format
msgid "Boot ISO"
msgstr "CD de demaraj"

#: standalone/drakTermServ:644
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Imagine"

#: standalone/drakTermServ:712
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "Versiune kernel"

#: standalone/drakTermServ:715
#, c-format
msgid "Create PXE images."
msgstr ""

#: standalone/drakTermServ:745
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Construieşte tot nucleul -->"

#: standalone/drakTermServ:753
#, c-format
msgid "No kernel selected!"
msgstr "Nu e selectat nici un nucleu!"

#: standalone/drakTermServ:756
#, c-format
msgid "Build Single NIC -->"
msgstr "Construieşte Interfaţă de reţea unică"

#: standalone/drakTermServ:760
#, c-format
msgid "No NIC selected!"
msgstr "Nu e selectată nici o interfaţă de reţea!"

#: standalone/drakTermServ:763
#, c-format
msgid "Build All Kernels -->"
msgstr "Construieşte toate nucleele -->"

#: standalone/drakTermServ:774
#, c-format
msgid "<-- Delete"
msgstr "<-- Şterge"

#: standalone/drakTermServ:779
#, fuzzy, c-format
msgid "No image selected!"
msgstr "Nu e selectată nici o interfaţă de reţea!"

#: standalone/drakTermServ:782
#, c-format
msgid "Delete All NBIs"
msgstr "Şterge toate NBI-urile"

#: standalone/drakTermServ:908
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:913
#, c-format
msgid "Add User -->"
msgstr "Adăugă utilizator -->"

#: standalone/drakTermServ:919
#, c-format
msgid "<-- Del User"
msgstr "<-- Şterge utilizator"

#: standalone/drakTermServ:955
#, c-format
msgid "type: %s"
msgstr "Tip: %s "

#: standalone/drakTermServ:959
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:989
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr ""
"Permite configurarea\n"
"hardware locală"

#: standalone/drakTermServ:998
#, c-format
msgid "No net boot images created!"
msgstr "Nu a fost creată nici o imagine de demaraj prin reţea!"

#: standalone/drakTermServ:1017
#, c-format
msgid "Thin Client"
msgstr "Client Thin"

#: standalone/drakTermServ:1021
#, c-format
msgid "Allow Thin Clients"
msgstr "Permite clienţi Thin"

#: standalone/drakTermServ:1022
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1023
#, c-format
msgid "Add Client -->"
msgstr "Adaugă client -->"

#: standalone/drakTermServ:1037
#, c-format
msgid "type: fat"
msgstr "tip: fat"

#: standalone/drakTermServ:1038
#, c-format
msgid "type: thin"
msgstr "tip: subţire"

#: standalone/drakTermServ:1045
#, c-format
msgid "local config: false"
msgstr "configurare locală: fals"

#: standalone/drakTermServ:1046
#, c-format
msgid "local config: true"
msgstr "configurare locală: true"

#: standalone/drakTermServ:1054
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Editare client"

#: standalone/drakTermServ:1080
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1087
#, c-format
msgid "Delete Client"
msgstr "Şterge client"

#: standalone/drakTermServ:1096
#, c-format
msgid "dhcpd Config..."
msgstr "Configurare DHCPD"

#: standalone/drakTermServ:1111
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1156
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1172
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1204
#, c-format
msgid "Subnet:"
msgstr "Subreţea:"

#: standalone/drakTermServ:1211
#, c-format
msgid "Netmask:"
msgstr "Mască de reţea:"

#: standalone/drakTermServ:1218
#, c-format
msgid "Routers:"
msgstr "Routere:"

#: standalone/drakTermServ:1225
#, c-format
msgid "Subnet Mask:"
msgstr "Mască subreţea:"

#: standalone/drakTermServ:1232
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1239
#, c-format
msgid "Domain Name:"
msgstr "Nume domeniu:"

#: standalone/drakTermServ:1247
#, c-format
msgid "Name Servers:"
msgstr "Servere de nume:"

#: standalone/drakTermServ:1258
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1259
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1301
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1303
#, c-format
msgid "Write Config"
msgstr "Scrie configuraţie"

#: standalone/drakTermServ:1319
#, c-format
msgid "dhcpd Server Configuration"
msgstr "Configurare server DHCPd"

#: standalone/drakTermServ:1320
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Majoritatea valorilor au fost extrase din\n"
"sistemul dvs. funcţional. Le puteţi schimba corespunzător."

#: standalone/drakTermServ:1323
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: standalone/drakTermServ:1474
#, c-format
msgid "Please insert floppy disk:"
msgstr "Introduceţi discheta :"

#: standalone/drakTermServ:1478
#, c-format
msgid "Could not access the floppy!"
msgstr "Nu pot accesa discheta!"

#: standalone/drakTermServ:1480
#, c-format
msgid "Floppy can be removed now"
msgstr "Acum discheta poate fi scoasă"

#: standalone/drakTermServ:1483
#, c-format
msgid "No floppy drive available!"
msgstr "Nici o unitate de dischetă nu este disponibilă!"

#: standalone/drakTermServ:1488
#, fuzzy, c-format
msgid "PXE image is %s/%s"
msgstr "Imaginea ISO pt. EtherBoot este %s"

#: standalone/drakTermServ:1490
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "Eroare la scrierea în fişierul %s"

#: standalone/drakTermServ:1500
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Imaginea ISO pt. EtherBoot este %s"

#: standalone/drakTermServ:1502
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1523
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1683
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1696
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "%s nu a fost găsit...\n"

#: standalone/drakTermServ:1697
#, fuzzy, c-format
msgid "%s is already a Terminal Server user\n"
msgstr "%s este deja folosit\n"

#: standalone/drakTermServ:1699
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1701
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1718
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "Am detectat %s"

#: standalone/drakTermServ:1720 standalone/drakTermServ:1793
#, c-format
msgid "%s not found...\n"
msgstr "%s nu a fost găsit...\n"

#: standalone/drakTermServ:1821
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:1961
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "Configuraţia s-a schimbat - restartez clusternfs/dhcpd?"

#: standalone/drakautoinst:38
#, c-format
msgid "Error!"
msgstr "Eroare!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "Configurator auto-instalare"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "reluare"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr ""

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Configurare automată paşi"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "Creare dischetă de autoinstalare"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Introduceţi o dischetă goală în perifericul %s"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Creare dischetă de autoinstalare"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
#: standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "Felicitări!"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:289
#, c-format
msgid "Auto Install"
msgstr "Auto-instalare"

#: standalone/drakautoinst:358
#, c-format
msgid "Add an item"
msgstr "Adăugă un element"

#: standalone/drakautoinst:365
#, c-format
msgid "Remove the last item"
msgstr "Elimină ultimul element"

#: standalone/drakbackup:88
#, c-format
msgid "hd"
msgstr "hd"

#: standalone/drakbackup:88
#, c-format
msgid "tape"
msgstr "bandă"

#: standalone/drakbackup:152
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:153
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "Păstrează parola pentru acest sistem în configuraţia drakbackup."

#: standalone/drakbackup:154
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:155
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:326
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:330
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:377
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:462 standalone/logdrake:437
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:466 standalone/logdrake:442
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:475
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:477
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:479
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr "Progres total"

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "Nu pot deschide %s!"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:643
#, c-format
msgid "Bad password on %s"
msgstr "Parola eronată la %s"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:645
#, c-format
msgid "Can not find %s on %s"
msgstr "Nu găsesc %s pe %s"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr "%s nu răspunde"

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:697
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr ""

#: standalone/drakbackup:701
#, c-format
msgid "WebDAV transfer failed!"
msgstr ""

#: standalone/drakbackup:722
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:726
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:731
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:773
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:831
#, c-format
msgid "Permission problem accessing CD."
msgstr "Problemă de permisii la accesarea CD-ului."

#: standalone/drakbackup:858
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:965
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:984 standalone/drakbackup:1017
#, c-format
msgid "Backup system files..."
msgstr ""

#: standalone/drakbackup:1018 standalone/drakbackup:1059
#, c-format
msgid "Hard Disk Backup files..."
msgstr ""

#: standalone/drakbackup:1058
#, c-format
msgid "Backup User files..."
msgstr "Backup fişiere utilizator..."

#: standalone/drakbackup:1093
#, c-format
msgid "Backup Other files..."
msgstr "Backup fişiere diverse..."

#: standalone/drakbackup:1094
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1099
#, c-format
msgid "No changes to backup!"
msgstr ""

#: standalone/drakbackup:1117 standalone/drakbackup:1141
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1126
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1127
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1129
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1146
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1151
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1160
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1161
#, c-format
msgid " Error while sending mail. \n"
msgstr " Eroare la trimitere mail.\n"

#: standalone/drakbackup:1191
#, c-format
msgid "Can not create catalog!"
msgstr "Nu se poate creea catalogul!"

#: standalone/drakbackup:1420
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: standalone/drakbackup:1421
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: standalone/drakbackup:1422
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr ""

#: standalone/drakbackup:1423 standalone/drakbackup:1487
#: standalone/drakbackup:1553
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1425 standalone/drakbackup:1489
#: standalone/drakbackup:1555
#, c-format
msgid "Use Incremental Backups"
msgstr ""

#: standalone/drakbackup:1425 standalone/drakbackup:1489
#: standalone/drakbackup:1555
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1427
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1428
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"Cu această opţiune veţi putea să restauraţi orice versiune\n"
" a directorului /etc."

#: standalone/drakbackup:1459
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""

#: standalone/drakbackup:1486
#, c-format
msgid "Do not include the browser cache"
msgstr ""

#: standalone/drakbackup:1540
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr ""

#: standalone/drakbackup:1541 standalone/drakfont:661
#, c-format
msgid "Remove Selected"
msgstr "Şterge cele selectate"

#: standalone/drakbackup:1604
#, c-format
msgid "Users"
msgstr "Utilizatori"

#: standalone/drakbackup:1624
#, c-format
msgid "Use network connection to backup"
msgstr ""

#: standalone/drakbackup:1626
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1630
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1631
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1633
#, c-format
msgid "Transfer Now"
msgstr "Transferă acum"

#: standalone/drakbackup:1635
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1638
#, c-format
msgid "Host name or IP."
msgstr "Nume gazdă sau IP."

#: standalone/drakbackup:1643
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1655
#, c-format
msgid "Remember this password"
msgstr "Memorează parola"

#: standalone/drakbackup:1671
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1762
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1765
#, c-format
msgid "Choose your CD/DVD device"
msgstr "Alegeţi dispozitivul CD/DVD"

#: standalone/drakbackup:1770
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "Alegeţi dispozitivul CD/DVD"

#: standalone/drakbackup:1777
#, c-format
msgid "Multisession CD"
msgstr "CD multisesiune"

#: standalone/drakbackup:1779
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1785
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr ""

#: standalone/drakbackup:1786
#, c-format
msgid " Erase Now "
msgstr " Şterge acum "

#: standalone/drakbackup:1792
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1794
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "Dispozitiv DVDR"

#: standalone/drakbackup:1796
#, c-format
msgid "DVDRAM device"
msgstr "Dispozitiv DVDRAM"

#: standalone/drakbackup:1827
#, c-format
msgid "No CD device defined!"
msgstr "Nu a fost definit nici un dispozitiv CD!"

#: standalone/drakbackup:1869
#, c-format
msgid "Use tape to backup"
msgstr "Foloseşte bandă pentru copii de siguranţă"

#: standalone/drakbackup:1872
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1878
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1884
#, c-format
msgid "Do not rewind tape after backup"
msgstr "Nu derula înapoi banda după efectuarea copiei"

#: standalone/drakbackup:1890
#, c-format
msgid "Erase tape before backup"
msgstr ""

#: standalone/drakbackup:1896
#, c-format
msgid "Eject tape after the backup"
msgstr ""

#: standalone/drakbackup:1968
#, c-format
msgid "Enter the directory to save to:"
msgstr ""

#: standalone/drakbackup:1972
#, c-format
msgid "Directory to save to"
msgstr ""

#: standalone/drakbackup:1977
#, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""

#: standalone/drakbackup:2041
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2046
#, c-format
msgid "HardDrive / NFS"
msgstr ""

#: standalone/drakbackup:2061 standalone/drakbackup:2062
#: standalone/drakbackup:2067
#, c-format
msgid "hourly"
msgstr "orar"

#: standalone/drakbackup:2061 standalone/drakbackup:2063
#: standalone/drakbackup:2068
#, c-format
msgid "daily"
msgstr "zilnic"

#: standalone/drakbackup:2061 standalone/drakbackup:2064
#: standalone/drakbackup:2069
#, c-format
msgid "weekly"
msgstr "săptămânal"

#: standalone/drakbackup:2061 standalone/drakbackup:2065
#: standalone/drakbackup:2070
#, c-format
msgid "monthly"
msgstr "lunar"

#: standalone/drakbackup:2061 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "custom"
msgstr "personalizat"

#: standalone/drakbackup:2075
#, c-format
msgid "January"
msgstr "Ianuarie"

#: standalone/drakbackup:2075
#, c-format
msgid "February"
msgstr "Februarie"

#: standalone/drakbackup:2075
#, c-format
msgid "March"
msgstr "Martie"

#: standalone/drakbackup:2076
#, c-format
msgid "April"
msgstr "Aprilie"

#: standalone/drakbackup:2076
#, c-format
msgid "May"
msgstr "Mai"

#: standalone/drakbackup:2076
#, c-format
msgid "June"
msgstr "Iunie"

#: standalone/drakbackup:2076
#, c-format
msgid "July"
msgstr "Iulie"

#: standalone/drakbackup:2076
#, c-format
msgid "August"
msgstr "August"

#: standalone/drakbackup:2076
#, c-format
msgid "September"
msgstr "Septembrie"

#: standalone/drakbackup:2077
#, c-format
msgid "October"
msgstr "Octombrie"

#: standalone/drakbackup:2077
#, c-format
msgid "November"
msgstr "Noiembrie"

#: standalone/drakbackup:2077
#, c-format
msgid "December"
msgstr "Decembrie"

#: standalone/drakbackup:2080
#, c-format
msgid "Sunday"
msgstr "Duminică"

#: standalone/drakbackup:2080
#, c-format
msgid "Monday"
msgstr "Luni"

#: standalone/drakbackup:2080
#, c-format
msgid "Tuesday"
msgstr "Marţi"

#: standalone/drakbackup:2081
#, c-format
msgid "Wednesday"
msgstr "Miercuri"

#: standalone/drakbackup:2081
#, c-format
msgid "Thursday"
msgstr "Joi"

#: standalone/drakbackup:2081
#, c-format
msgid "Friday"
msgstr "Vineri"

#: standalone/drakbackup:2081
#, c-format
msgid "Saturday"
msgstr "Sâmbătă"

#: standalone/drakbackup:2113
#, c-format
msgid "Use daemon"
msgstr "Utilizează daemonul"

#: standalone/drakbackup:2117
#, c-format
msgid "Please choose the time interval between each backup"
msgstr ""

#: standalone/drakbackup:2123
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2128
#, c-format
msgid "Minute"
msgstr "Minut"

#: standalone/drakbackup:2132
#, c-format
msgid "Hour"
msgstr "Oră"

#: standalone/drakbackup:2136
#, c-format
msgid "Day"
msgstr "Zi"

#: standalone/drakbackup:2140
#, c-format
msgid "Month"
msgstr "Luna"

#: standalone/drakbackup:2144
#, c-format
msgid "Weekday"
msgstr "Zi din săptămână"

#: standalone/drakbackup:2150
#, c-format
msgid "Please choose the media for backup."
msgstr "Vă rog alegeţi mediul pentru copie de siguranţă."

#: standalone/drakbackup:2156
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""

#: standalone/drakbackup:2157
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2158
#, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""

#: standalone/drakbackup:2205
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "?"

#: standalone/drakbackup:2209
#, c-format
msgid "Use .backupignore files"
msgstr "Foloseşte fişiere .backupignore"

#: standalone/drakbackup:2211
#, c-format
msgid "Send mail report after each backup to:"
msgstr ""

#: standalone/drakbackup:2217
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "Numele serverului SMB"

#: standalone/drakbackup:2222
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2262
#, c-format
msgid "What"
msgstr "Ce"

#: standalone/drakbackup:2267
#, c-format
msgid "Where"
msgstr "Unde"

#: standalone/drakbackup:2272
#, c-format
msgid "When"
msgstr "Când"

#: standalone/drakbackup:2277
#, c-format
msgid "More Options"
msgstr "Mai multe opţiuni"

#: standalone/drakbackup:2290
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "Funcţionalitatea reţelei nu este configurată"

#: standalone/drakbackup:2310 standalone/drakbackup:4234
#, c-format
msgid "Drakbackup Configuration"
msgstr "Configurare DrakBackup"

#: standalone/drakbackup:2326
#, c-format
msgid "Please choose where you want to backup"
msgstr ""

#: standalone/drakbackup:2329
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2329
#, c-format
msgid "Across Network"
msgstr "peste reţea"

#: standalone/drakbackup:2329
#, c-format
msgid "On CD-R"
msgstr "pe CDROM"

#: standalone/drakbackup:2329
#, c-format
msgid "On Tape Device"
msgstr "pe bandă"

#: standalone/drakbackup:2375
#, c-format
msgid "Backup Users"
msgstr ""

#: standalone/drakbackup:2376
#, c-format
msgid " (Default is all users)"
msgstr "(Implicit este toţi utilizatorii)"

#: standalone/drakbackup:2389
#, c-format
msgid "Please choose what you want to backup"
msgstr ""

#: standalone/drakbackup:2390
#, c-format
msgid "Backup System"
msgstr ""

#: standalone/drakbackup:2392
#, c-format
msgid "Select user manually"
msgstr ""

#: standalone/drakbackup:2421
#, c-format
msgid "Please select data to backup..."
msgstr ""

#: standalone/drakbackup:2493
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2494
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: standalone/drakbackup:2496
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2498
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2500
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2501
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\tLimitează utilizarea discului la %s MB\n"

#: standalone/drakbackup:2504
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2509
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2510
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2511
#, c-format
msgid " on device: %s"
msgstr ""

#: standalone/drakbackup:2512
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2513
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: standalone/drakbackup:2514
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2516
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2518
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2519
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2520
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""

#: standalone/drakbackup:2521
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2523
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: standalone/drakbackup:2524
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: standalone/drakbackup:2525
#, c-format
msgid "\tBackups use tar only\n"
msgstr ""

#: standalone/drakbackup:2527
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tFoloseşte fişierele .backupignore\n"

#: standalone/drakbackup:2528
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2529
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "Pe serverul CUPS \"%s\""

#: standalone/drakbackup:2531
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2532
#, c-format
msgid "\t-Hard drive.\n"
msgstr ""

#: standalone/drakbackup:2533
#, c-format
msgid "\t-CD-R.\n"
msgstr ""

#: standalone/drakbackup:2534
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2535
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2536
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2537
#, c-format
msgid "\t-Network by rsync.\n"
msgstr ""

#: standalone/drakbackup:2538
#, c-format
msgid "\t-Network by webdav.\n"
msgstr ""

#: standalone/drakbackup:2540
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2545
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2547
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr ""
"Restaurează fişierele\n"
"selectate"

#: standalone/drakbackup:2549 standalone/drakbackup:2559
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2552
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr "Restaurare utilizatori"

#: standalone/drakbackup:2557
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr "Restaurare diverse"

#: standalone/drakbackup:2736
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Listă de date corupte:\n"
"\n"

#: standalone/drakbackup:2738
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr ""

#: standalone/drakbackup:2748
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2769
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2770
#, c-format
msgid "          Successfully Restored on %s       "
msgstr ""

#: standalone/drakbackup:2890
#, c-format
msgid "         Restore Configuration       "
msgstr "           Restaurează configuraţia       "

#: standalone/drakbackup:2918
#, c-format
msgid "OK to restore the other files."
msgstr ""

#: standalone/drakbackup:2934
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:2999
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "?"

#: standalone/drakbackup:3036
#, c-format
msgid "Restore from Hard Disk."
msgstr "Restaurează de pe Hard Disk"

#: standalone/drakbackup:3038
#, c-format
msgid "Enter the directory where backups are stored"
msgstr ""

#: standalone/drakbackup:3042
#, c-format
msgid "Directory with backups"
msgstr ""

#: standalone/drakbackup:3096
#, c-format
msgid "Select another media to restore from"
msgstr ""

#: standalone/drakbackup:3098
#, c-format
msgid "Other Media"
msgstr ""

#: standalone/drakbackup:3103
#, c-format
msgid "Restore system"
msgstr "Restaurare sistem"

#: standalone/drakbackup:3104
#, c-format
msgid "Restore Users"
msgstr "Restaurare utilizatori"

#: standalone/drakbackup:3105
#, c-format
msgid "Restore Other"
msgstr "Restaurare diverse"

#: standalone/drakbackup:3107
#, c-format
msgid "Select path to restore (instead of /)"
msgstr ""

#: standalone/drakbackup:3111 standalone/drakbackup:3393
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "Restaurare personalizată"

#: standalone/drakbackup:3114
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3116
#, c-format
msgid "Remove user directories before restore."
msgstr ""

#: standalone/drakbackup:3201
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3204
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3222
#, fuzzy, c-format
msgid "No matches found..."
msgstr "Nu am găsit nici o imagine"

#: standalone/drakbackup:3226
#, c-format
msgid "Restore Selected"
msgstr "Restaurează selecţia"

#: standalone/drakbackup:3361
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3367
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3376
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Restaurează fişierele\n"
"selectate"

#: standalone/drakbackup:3453
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: standalone/drakbackup:3466
#, c-format
msgid "Restore From CD"
msgstr "Restaurează de pe CD"

#: standalone/drakbackup:3466
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3468
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3478
#, c-format
msgid "Restore From Tape"
msgstr "Restaurează de pe bandă"

#: standalone/drakbackup:3478
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3480
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3491
#, c-format
msgid "Restore Via Network"
msgstr "Restaurează prin reţea"

#: standalone/drakbackup:3491
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Restaurează prin protocolul de reţea: %s"

#: standalone/drakbackup:3492
#, c-format
msgid "Host Name"
msgstr "Nume gazdă"

#: standalone/drakbackup:3493
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3500
#, c-format
msgid "Password required"
msgstr "Parolă necesară"

#: standalone/drakbackup:3506
#, c-format
msgid "Username required"
msgstr "Nume utilizator necesar"

#: standalone/drakbackup:3509
#, c-format
msgid "Hostname required"
msgstr "Nume gazdă necesar"

#: standalone/drakbackup:3514
#, c-format
msgid "Path or Module required"
msgstr "Cale sau modul necesar"

#: standalone/drakbackup:3527
#, c-format
msgid "Files Restored..."
msgstr "Fişiere restaurate..."

#: standalone/drakbackup:3530
#, c-format
msgid "Restore Failed..."
msgstr "Restaurare eşuată..."

#: standalone/drakbackup:3548
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "%s nu a fost găsit...\n"

#: standalone/drakbackup:3770 standalone/drakbackup:3839
#, c-format
msgid "Search for files to restore"
msgstr "Căutare fişiere ce vor fi restaurate"

#: standalone/drakbackup:3774
#, c-format
msgid "Restore all backups"
msgstr ""

#: standalone/drakbackup:3782
#, c-format
msgid "Custom Restore"
msgstr "Restaurare personalizată"

#: standalone/drakbackup:3786 standalone/drakbackup:3835
#, c-format
msgid "Restore From Catalog"
msgstr "Restaurează din catalog"

#: standalone/drakbackup:3807
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr ""

#: standalone/drakbackup:3808
#, c-format
msgid "Verify that %s is the correct path"
msgstr "Verificaţi dacă %s este calea corectă"

#: standalone/drakbackup:3809
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3811
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3827
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3832
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3833
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "Restaurează de pe CD"

#: standalone/drakbackup:3869
#, c-format
msgid "Restore Progress"
msgstr "Evoluţie restaurare"

#: standalone/drakbackup:3980
#, c-format
msgid "Build Backup"
msgstr ""

#: standalone/drakbackup:4013 standalone/drakbackup:4333
#, c-format
msgid "Restore"
msgstr "Restaurează"

#: standalone/drakbackup:4101
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Este necesară instalarea următoarelor pachetele: \n"

#: standalone/drakbackup:4128
#, c-format
msgid "Please select data to restore..."
msgstr ""

#: standalone/drakbackup:4168
#, c-format
msgid "Backup system files"
msgstr ""

#: standalone/drakbackup:4171
#, c-format
msgid "Backup user files"
msgstr ""

#: standalone/drakbackup:4174
#, c-format
msgid "Backup other files"
msgstr ""

#: standalone/drakbackup:4177 standalone/drakbackup:4211
#, c-format
msgid "Total Progress"
msgstr ""

#: standalone/drakbackup:4203
#, c-format
msgid "Sending files by FTP"
msgstr "Trimit fişierele via FTP"

#: standalone/drakbackup:4206
#, c-format
msgid "Sending files..."
msgstr "Trimit fişierele..."

#: standalone/drakbackup:4276
#, c-format
msgid "Backup Now from configuration file"
msgstr ""

#: standalone/drakbackup:4281
#, c-format
msgid "View Backup Configuration."
msgstr ""

#: standalone/drakbackup:4307
#, c-format
msgid "Wizard Configuration"
msgstr "Configurare asistent"

#: standalone/drakbackup:4312
#, c-format
msgid "Advanced Configuration"
msgstr "Configurare avansată"

#: standalone/drakbackup:4317
#, c-format
msgid "View Configuration"
msgstr "Vizualizare configuraţie"

#: standalone/drakbackup:4321
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4326
#, c-format
msgid "Backup Now"
msgstr ""

#: standalone/drakbackup:4330
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4350 standalone/drakbackup:4353
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:64
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "Selectare model imprimantă"

#: standalone/drakboot:64
#, c-format
msgid "System mode"
msgstr "Mod sistem"

#: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:187
#: standalone/harddrake2:188 standalone/logdrake:70
#: standalone/printerdrake:138 standalone/printerdrake:139
#: standalone/printerdrake:140
#, c-format
msgid "/_File"
msgstr "/_Fişier"

#: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76
#, c-format
msgid "/File/_Quit"
msgstr "/Fişier/_Termină"

#: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:188
#: standalone/logdrake:76 standalone/printerdrake:140
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:148
#, c-format
msgid "Install themes"
msgstr "Instalare teme"

#: standalone/drakboot:149
#, c-format
msgid "Create new theme"
msgstr "Creează o temă nouă "

#: standalone/drakboot:161
#, c-format
msgid "Use graphical boot"
msgstr ""

#: standalone/drakboot:166
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:167
#, fuzzy, c-format
msgid "Do you want to configure it now?"
msgstr "Doriţi să testaţi configuraţia ?"

#: standalone/drakboot:177
#, c-format
msgid "Theme"
msgstr "Teme"

#: standalone/drakboot:180
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Afişează tema\n"
"sub consolă"

#: standalone/drakboot:189
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Lansează mediul grafic la pornirea sistemului dvs."

#: standalone/drakboot:197
#, c-format
msgid "No, I do not want autologin"
msgstr "Nu, nu vreau autologare"

#: standalone/drakboot:198
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Da, vreau autologare cu acest (utilizator, desktop)"

#: standalone/drakboot:201
#, c-format
msgid "Default user"
msgstr "Utilizator implicit"

#: standalone/drakboot:202
#, c-format
msgid "Default desktop"
msgstr "Mediu implicit"

#: standalone/drakboot:310
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, fuzzy, c-format
msgid "Mandrakelinux Bug Report Tool"
msgstr "Centrul de control Mandrakelinux"

#: standalone/drakbug:46
#, c-format
msgid "Mandrakelinux Control Center"
msgstr "Centrul de control Mandrakelinux"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr "Unealtă de sincronizare"

#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
#: standalone/drakbug:150 standalone/drakbug:154
#, c-format
msgid "Standalone Tools"
msgstr "Unelte de sine stătătoare"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandrakeonline"
msgstr "Mandrakeonline"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr "Telecomandă"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "Manager de programe (Software Manager)"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr "Unealta de migrare Windows"

#: standalone/drakbug:58
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr "Asistenţi de configurare"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandrakesoft Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "Caută pachet"

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "Pachet:"

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "nucleu:"

#: standalone/drakbug:100
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""

#: standalone/drakbug:106
#, c-format
msgid "Report"
msgstr "Raport"

#: standalone/drakbug:163
#, c-format
msgid "Not installed"
msgstr "Nu este instalat"

#: standalone/drakbug:175
#, c-format
msgid "Package not installed"
msgstr "Pachet neinstalat"

#: standalone/drakclock:29
#, fuzzy, c-format
msgid "DrakClock"
msgstr "Drakbackup"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "neconfigurat"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "Zona de timp"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr ""

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr ""

#: standalone/drakclock:47
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Ceas hardware fixat la GMT"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Interfaţa de reţea"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, fuzzy, c-format
msgid "Enable Network Time Protocol"
msgstr "Restaurează prin protocolul de reţea: %s"

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "Server:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "Resetează"

#: standalone/drakclock:224
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr "Pachetul %s trebuie instalat. Doriţi să îl instalez?"

#: standalone/drakconnect:85
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Configuraţia reţelei (%d adaptoare)"

#: standalone/drakconnect:96 standalone/drakconnect:786
#, c-format
msgid "Gateway:"
msgstr "Pasarelă:"

#: standalone/drakconnect:96 standalone/drakconnect:786
#, c-format
msgid "Interface:"
msgstr "Interfaţă:"

#: standalone/drakconnect:100 standalone/net_monitor:122
#, c-format
msgid "Wait please"
msgstr "Vă rog să aşteptaţi"

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "Interfaţă"

#: standalone/drakconnect:116 standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "State"
msgstr "Stare"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr "Nume gazdă:"

#: standalone/drakconnect:135
#, c-format
msgid "Configure hostname..."
msgstr "Configurează nume gazdă..."

#: standalone/drakconnect:149 standalone/drakconnect:842
#, c-format
msgid "LAN configuration"
msgstr "Configuraţie LAN"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "Configurare reţea locală (Local Area Network)"

#: standalone/drakconnect:162 standalone/drakconnect:246
#: standalone/drakconnect:250
#, c-format
msgid "Apply"
msgstr "Aplică"

#: standalone/drakconnect:197
#, c-format
msgid "Manage connections"
msgstr "Administrare conexiuni"

#: standalone/drakconnect:224
#, fuzzy, c-format
msgid "Device selected"
msgstr "Şterge cele selectate"

#: standalone/drakconnect:305
#, fuzzy, c-format
msgid "IP configuration"
msgstr "Configurare CUPS"

#: standalone/drakconnect:344
#, fuzzy, c-format
msgid "DNS servers"
msgstr "Server DNS"

#: standalone/drakconnect:352
#, fuzzy, c-format
msgid "Search Domain"
msgstr "Domeniu NIS"

#: standalone/drakconnect:360
#, fuzzy, c-format
msgid "static"
msgstr "IP automat"

#: standalone/drakconnect:360
#, c-format
msgid "DHCP"
msgstr ""

#: standalone/drakconnect:470
#, fuzzy, c-format
msgid "Metric"
msgstr "limitează"

#: standalone/drakconnect:493
#, c-format
msgid "Flow control"
msgstr "Control transfer"

#: standalone/drakconnect:494
#, fuzzy, c-format
msgid "Line termination"
msgstr "Staţie de lucru în Internet"

#: standalone/drakconnect:505
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Expirare shell"

#: standalone/drakconnect:509
#, fuzzy, c-format
msgid "Use lock file"
msgstr "Selectează fişierul"

#: standalone/drakconnect:511
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:514
#, fuzzy, c-format
msgid "Busy wait"
msgstr "Kuweit"

#: standalone/drakconnect:519
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Modem-uri"

#: standalone/drakconnect:520
#, c-format
msgid "Enable"
msgstr "Validează"

#: standalone/drakconnect:520
#, c-format
msgid "Disable"
msgstr "Invalidează"

#: standalone/drakconnect:571 standalone/harddrake2:48
#, c-format
msgid "Media class"
msgstr "Clasă de mediu"

#: standalone/drakconnect:572 standalone/drakfloppy:136
#, c-format
msgid "Module name"
msgstr "Nume modul"

#: standalone/drakconnect:573
#, fuzzy, c-format
msgid "Mac Address"
msgstr "Adresă IP"

#: standalone/drakconnect:574 standalone/harddrake2:26
#: standalone/harddrake2:118
#, c-format
msgid "Bus"
msgstr "Magistrală"

#: standalone/drakconnect:575 standalone/harddrake2:32
#, c-format
msgid "Location on the bus"
msgstr "Poziţionarea pe magistrală"

#: standalone/drakconnect:671 standalone/drakgw:247 standalone/drakpxe:138
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""

#: standalone/drakconnect:679
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "Alegeţi interfaţa de reţea"

#: standalone/drakconnect:683
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "Alegeţi interfaţa de reţea"

#: standalone/drakconnect:715
#, fuzzy, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"O problemă a avut loc la restartarea reţelei: \n"
"\n"
"%s"

#: standalone/drakconnect:716
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:732
#, c-format
msgid "No IP"
msgstr ""

#: standalone/drakconnect:733
#, c-format
msgid "No Mask"
msgstr "Fără mască"

#: standalone/drakconnect:734 standalone/drakconnect:913
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:734 standalone/drakconnect:913
#, fuzzy, c-format
msgid "down"
msgstr "Gata"

#: standalone/drakconnect:776 standalone/net_monitor:470
#, c-format
msgid "Connected"
msgstr "Conectat"

#: standalone/drakconnect:776 standalone/net_monitor:470
#, c-format
msgid "Not connected"
msgstr "Deconectat"

#: standalone/drakconnect:778
#, c-format
msgid "Disconnect..."
msgstr "Deconectare..."

#: standalone/drakconnect:778
#, c-format
msgid "Connect..."
msgstr "Conectare..."

#: standalone/drakconnect:807
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/drakconnect:838
#, c-format
msgid "Deactivate now"
msgstr "Dezactivează acum"

#: standalone/drakconnect:838
#, c-format
msgid "Activate now"
msgstr "Activează acum"

#: standalone/drakconnect:846
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Nu aveţi configurată nici o interfaţă.\n"
"Configuraţi-le prin click pe butonul 'Configurare'"

#: standalone/drakconnect:860
#, c-format
msgid "LAN Configuration"
msgstr "Configurare LAN"

#: standalone/drakconnect:872
#, c-format
msgid "Adapter %s: %s"
msgstr "Adaptor %s: %s"

#: standalone/drakconnect:881
#, c-format
msgid "Boot Protocol"
msgstr "Protocol demaraj"

#: standalone/drakconnect:882
#, c-format
msgid "Started on boot"
msgstr "Pornit la demaraj"

#: standalone/drakconnect:918
#, fuzzy, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrakelinux Control Center"
msgstr ""
"Această interfaţă nu a fost configurată încă.\n"
"Lansaţi asistentul de configurare în fereastra principală"

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:973 standalone/net_applet:50
#, fuzzy, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandrakelinux Control Center"
msgstr ""
"Această interfaţă nu a fost configurată încă.\n"
"Lansaţi asistentul de configurare în fereastra principală"

#: standalone/drakconnect:974 standalone/net_applet:51
#, fuzzy, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "Alegeţi interfaţa de reţea"

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr "Configurare conexiune la Internet"

#: standalone/drakconnect:999
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "Primul server DNS (opţional)"

#: standalone/drakconnect:1021
#, c-format
msgid "Internet Connection Configuration"
msgstr "Configurare conexiune la Internet"

#: standalone/drakconnect:1022
#, c-format
msgid "Internet access"
msgstr "Acces la Internet"

#: standalone/drakconnect:1024 standalone/net_monitor:101
#, c-format
msgid "Connection type: "
msgstr "Tip conexiune:"

#: standalone/drakconnect:1027
#, c-format
msgid "Status:"
msgstr "Stare:"

#: standalone/drakedm:34
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr ""

#: standalone/drakedm:35
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr ""

#: standalone/drakedm:36
#, c-format
msgid "MdkKDM (Mandrakelinux Display Manager)"
msgstr ""

#: standalone/drakedm:37
#, c-format
msgid "XDM (X Display Manager)"
msgstr ""

#: standalone/drakedm:55
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:56
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:79
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "Modificarea a fost efectuată, doriţi să repornesc serviciul dm ?"

#: standalone/drakedm:80
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfloppy:41
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:78
#, c-format
msgid "Boot disk creation"
msgstr "Creare disc demaraj"

#: standalone/drakfloppy:79
#, c-format
msgid "General"
msgstr "General"

#: standalone/drakfloppy:82 standalone/harddrake2:145
#, c-format
msgid "Device"
msgstr "Dispozitiv"

#: standalone/drakfloppy:88
#, c-format
msgid "Kernel version"
msgstr "Versiune kernel"

#: standalone/drakfloppy:103
#, c-format
msgid "Preferences"
msgstr "Preferinţe"

#: standalone/drakfloppy:117
#, c-format
msgid "Advanced preferences"
msgstr "Preferinţe avansate"

#: standalone/drakfloppy:136
#, c-format
msgid "Size"
msgstr "Dimensiune"

#: standalone/drakfloppy:139
#, fuzzy, c-format
msgid "Mkinitrd optional arguments"
msgstr "Argumente opţionale mkinitrd"

#: standalone/drakfloppy:141
#, c-format
msgid "force"
msgstr "Forţează"

#: standalone/drakfloppy:142
#, c-format
msgid "omit raid modules"
msgstr "Omite modulele raid"

#: standalone/drakfloppy:143
#, c-format
msgid "if needed"
msgstr "Dacă este necesar"

#: standalone/drakfloppy:144
#, c-format
msgid "omit scsi modules"
msgstr "Omite modulele scsi"

#: standalone/drakfloppy:147
#, c-format
msgid "Add a module"
msgstr "Adaugă un modul"

#: standalone/drakfloppy:156
#, c-format
msgid "Remove a module"
msgstr "Elimină un modul"

#: standalone/drakfloppy:291
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Asiguraţi-vă că există mediu (disketă) în dispozitivul: %s"

#: standalone/drakfloppy:297
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Nu există mediu (disketă) în dispozitivul %s sau mediul este protejat la "
"scriere .\n"
"Introduceţi una!"

#: standalone/drakfloppy:300
#, c-format
msgid "Unable to fork: %s"
msgstr "Nu pot executa fork: %s"

#: standalone/drakfloppy:303
#, c-format
msgid "Floppy creation completed"
msgstr "Crearea dischetei s-a terminat"

#: standalone/drakfloppy:303
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/drakfloppy:308
#, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"Nu pot termina corespunzător mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"

#: standalone/drakfont:182
#, c-format
msgid "Search installed fonts"
msgstr "Caută fonturi instalate"

#: standalone/drakfont:184
#, c-format
msgid "Unselect fonts installed"
msgstr "Deselectează fonturile instalate"

#: standalone/drakfont:207
#, c-format
msgid "parse all fonts"
msgstr "parsează toate fonturile"

#: standalone/drakfont:209
#, fuzzy, c-format
msgid "No fonts found"
msgstr "Nu am găsit nici un font"

#: standalone/drakfont:217 standalone/drakfont:257 standalone/drakfont:324
#: standalone/drakfont:357 standalone/drakfont:365 standalone/drakfont:391
#: standalone/drakfont:409 standalone/drakfont:423
#, c-format
msgid "done"
msgstr "Gata"

#: standalone/drakfont:222
#, fuzzy, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "nu am găsit nici un font în partiţiile montate."

#: standalone/drakfont:255
#, c-format
msgid "Reselect correct fonts"
msgstr "Reselectaţi fonturile corecte"

#: standalone/drakfont:258
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "nu am găsit nici un font.\n"

#: standalone/drakfont:268
#, c-format
msgid "Search for fonts in installed list"
msgstr "Caută fonturi în lista instalată"

#: standalone/drakfont:293
#, c-format
msgid "%s fonts conversion"
msgstr "conversie fonturi %s"

#: standalone/drakfont:322
#, c-format
msgid "Fonts copy"
msgstr "Copiere fonturi"

#: standalone/drakfont:325
#, c-format
msgid "True Type fonts installation"
msgstr "Instalare fonturi True Type"

#: standalone/drakfont:332
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "Vă rog să aşteptaţi în timp ce execut ttmkfdir..."

#: standalone/drakfont:333
#, c-format
msgid "True Type install done"
msgstr "Instalare True Type terminată"

#: standalone/drakfont:339 standalone/drakfont:354
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:348
#, c-format
msgid "Ghostscript referencing"
msgstr "Referinţă Ghostscript"

#: standalone/drakfont:358
#, c-format
msgid "Suppress Temporary Files"
msgstr "Elimină fişierele temporare"

#: standalone/drakfont:361
#, c-format
msgid "Restart XFS"
msgstr "Reporneşte XFS"

#: standalone/drakfont:407 standalone/drakfont:417
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:419
#, c-format
msgid "xfs restart"
msgstr "repornire XFS"

#: standalone/drakfont:427
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:476 standalone/drakfont:485
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:486
#, c-format
msgid "Font List"
msgstr "Listă fonturi"

#: standalone/drakfont:492
#, c-format
msgid "About"
msgstr "Despre"

#: standalone/drakfont:494 standalone/drakfont:692 standalone/drakfont:730
#, c-format
msgid "Uninstall"
msgstr "Dezinstalează"

#: standalone/drakfont:495
#, c-format
msgid "Import"
msgstr "Import"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:513
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandrakesoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""

#: standalone/drakfont:522
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:538
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:557
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Alegeţi aplicaţiile ce vor suporta fonturile:"

#: standalone/drakfont:558
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:568
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:569
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:570
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:571
#, c-format
msgid "Generic Printers"
msgstr "Imprimante generice"

#: standalone/drakfont:587
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: standalone/drakfont:588
#, c-format
msgid "File Selection"
msgstr "Selectare fişiere"

#: standalone/drakfont:604
#, c-format
msgid "You've not selected any font"
msgstr "Nu aţi selectat nici un font"

#: standalone/drakfont:657
#, fuzzy, c-format
msgid "Import fonts"
msgstr "Import fonturi"

#: standalone/drakfont:662
#, fuzzy, c-format
msgid "Install fonts"
msgstr "Dezinstalează fonturi"

#: standalone/drakfont:697
#, c-format
msgid "click here if you are sure."
msgstr "Click aici dacă sunteţi sigur(ă)."

#: standalone/drakfont:699
#, c-format
msgid "here if no."
msgstr "aici dacă nu."

#: standalone/drakfont:738
#, c-format
msgid "Unselected All"
msgstr "Toate cele deselectate"

#: standalone/drakfont:741
#, c-format
msgid "Selected All"
msgstr "Toate cele selectate"

#: standalone/drakfont:744
#, c-format
msgid "Remove List"
msgstr "Şterge listă"

#: standalone/drakfont:755 standalone/drakfont:774
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "Import fonturi"

#: standalone/drakfont:759 standalone/drakfont:779
#, c-format
msgid "Initial tests"
msgstr "Teste iniţiale"

#: standalone/drakfont:760
#, c-format
msgid "Copy fonts on your system"
msgstr ""

#: standalone/drakfont:761
#, c-format
msgid "Install & convert Fonts"
msgstr ""

#: standalone/drakfont:762
#, c-format
msgid "Post Install"
msgstr "Post-instalare"

#: standalone/drakfont:780
#, c-format
msgid "Remove fonts on your system"
msgstr "Şterge fonturi din sistemul dvs."

#: standalone/drakfont:781
#, c-format
msgid "Post Uninstall"
msgstr "Post-dezinstalare"

#: standalone/drakgw:58 standalone/drakgw:191
#, c-format
msgid "Internet Connection Sharing"
msgstr "Partajare conexiune la Internet"

#: standalone/drakgw:111 standalone/drakvpn:51
#, fuzzy, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "Regret, suportul este numai pt. nucleu-e 2.4"

#: standalone/drakgw:122
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Partajarea conexiunii la Internet este dezactivată."

#: standalone/drakgw:123
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Configurarea partajării conexiunii la Internet a fost făcută deja.\n"
"Acum este dezactivată.\n"
"\n"
"Ce doriţi să facem?"

#: standalone/drakgw:127 standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "Activează"

#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
#: standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "Reconfigurează"

#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
#, c-format
msgid "dismiss"
msgstr ""

#: standalone/drakgw:134
#, c-format
msgid "Enabling servers..."
msgstr "Activez serverele..."

#: standalone/drakgw:146
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Partajarea conexiunii la Internet este acum activată."

#: standalone/drakgw:149
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr ""

#: standalone/drakgw:150
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:154 standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "Dezactivează"

#: standalone/drakgw:157
#, c-format
msgid "Disabling servers..."
msgstr "Dezactivez serverele..."

#: standalone/drakgw:172
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Partajarea conexiunii la Internet este acum dezactivată."

#: standalone/drakgw:192
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""

#: standalone/drakgw:236
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interfaţă %s (folosind modulul %s)"

#: standalone/drakgw:237
#, c-format
msgid "Interface %s"
msgstr "Interfaţă %s"

#: standalone/drakgw:246 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr ""

#: standalone/drakgw:253
#, c-format
msgid "Network interface"
msgstr "Interfaţa de reţea"

#: standalone/drakgw:254
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""

#: standalone/drakgw:260 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "Alegeţi interfaţa de reţea"

#: standalone/drakgw:261
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""

#: standalone/drakgw:290
#, c-format
msgid "Network interface already configured"
msgstr "Interfaţa de reţea este deja configurată"

#: standalone/drakgw:291
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: standalone/drakgw:296
#, c-format
msgid "Automatic reconfiguration"
msgstr "Reconfigurare automată"

#: standalone/drakgw:296
#, c-format
msgid "No (experts only)"
msgstr "Nu (mod expert)"

#: standalone/drakgw:297
#, c-format
msgid "Show current interface configuration"
msgstr "Afişează configuraţie interfaţă curentă"

#: standalone/drakgw:298
#, c-format
msgid "Current interface configuration"
msgstr "Configuraţie interfaţă curentă"

#: standalone/drakgw:299
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Configuraţia curentă pt. `%s':\n"
"\n"
"Reţea: %s\n"
"Adresa IP: %s\n"
"Atribuire IP: %s\n"
"Driver: %s"

#: standalone/drakgw:312
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""

#: standalone/drakgw:319
#, c-format
msgid "Local Network adress"
msgstr "Adresa reţea locală"

#: standalone/drakgw:323
#, fuzzy, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""
"Configurare server DHCP.\n"
"\n"
"Acici puteţi selecta diversele opţiuni pentru configurarea serverului DHCP.\n"
"Dacă nu cunoaşteţi semnificaţia unei opţiuni, lăsaţi-o nemodificată.\n"
"\n"

#: standalone/drakgw:327
#, c-format
msgid "(This) DHCP Server IP"
msgstr "Adresa IP pt. (acest) server DHCP"

#: standalone/drakgw:328
#, c-format
msgid "The DNS Server IP"
msgstr "Adresa IP a serverulul DNS"

#: standalone/drakgw:329
#, c-format
msgid "The internal domain name"
msgstr "Nume domeniu intern"

#: standalone/drakgw:330
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:331
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:332
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:333
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:334
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr ""

#: standalone/drakgw:341
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: standalone/drakgw:351
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
"Am găsit un potenţial conflict de adrese LAN în configuraţia curentă a %s!\n"

#: standalone/drakgw:361
#, c-format
msgid "Configuring..."
msgstr "Configurez..."

#: standalone/drakgw:362
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Configurare script-uri, instalare programe, pornire servere..."

#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
#, c-format
msgid "Problems installing package %s"
msgstr "Probleme la instalarea pachetului  %s"

#: standalone/drakgw:598
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 Mandrakesoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:36
#, fuzzy, c-format
msgid "Mandrakelinux Help Center"
msgstr "Centrul de control Mandrakelinux"

#: standalone/drakhelp:36
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakperm:22
#, c-format
msgid "System settings"
msgstr "Setări sistem"

#: standalone/drakperm:23
#, c-format
msgid "Custom settings"
msgstr "Setări personalizate"

#: standalone/drakperm:24
#, c-format
msgid "Custom & system settings"
msgstr "Configurare personalizată şi sistem"

#: standalone/drakperm:44
#, c-format
msgid "Editable"
msgstr "Editabil"

#: standalone/drakperm:49 standalone/drakperm:321
#, c-format
msgid "Path"
msgstr "Cale"

#: standalone/drakperm:49 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Utilizator"

#: standalone/drakperm:49 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Grup"

#: standalone/drakperm:49 standalone/drakperm:333
#, c-format
msgid "Permissions"
msgstr "Drepturi"

#: standalone/drakperm:107
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:110
#, fuzzy, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""
"Nivelul de securitate curent este %s\n"
"Selectaţi permisiunile de consultat/editat"

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr "Sus"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr "Mută regula selectată un nivel în sus"

#: standalone/drakperm:122
#, c-format
msgid "Down"
msgstr "Jos"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr "Mută regula selectată un nivel în jos"

#: standalone/drakperm:123
#, c-format
msgid "Add a rule"
msgstr "Adaugă o regulă"

#: standalone/drakperm:123
#, c-format
msgid "Add a new rule at the end"
msgstr "Adaugă o regulă nouă la sfârşit"

#: standalone/drakperm:124
#, c-format
msgid "Delete selected rule"
msgstr "Şterge regula selectată"

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakperm:125 standalone/drakups:298 standalone/drakups:358
#: standalone/drakups:378 standalone/drakvpn:333 standalone/drakvpn:694
#: standalone/printerdrake:232
#, c-format
msgid "Edit"
msgstr "Editare"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr "Editare regulă curentă"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "navighează"

#: standalone/drakperm:247
#, fuzzy, c-format
msgid "user"
msgstr "Maus"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "grup"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "altul"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Citire"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "Scrie"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "Execută"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr "Sticky-bit"

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr ""

#: standalone/drakperm:290 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "Utilizator :"

#: standalone/drakperm:292
#, c-format
msgid "Group:"
msgstr "Grup :"

#: standalone/drakperm:296
#, c-format
msgid "Current user"
msgstr "Utilizator curent"

#: standalone/drakperm:297
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""

#: standalone/drakperm:307
#, c-format
msgid "Path selection"
msgstr "Selectare cale"

#: standalone/drakperm:327
#, c-format
msgid "Property"
msgstr "Proprietate"

#: standalone/drakpxe:55
#, c-format
msgid "PXE Server Configuration"
msgstr "Configurare server PXE"

#: standalone/drakpxe:111
#, c-format
msgid "Installation Server Configuration"
msgstr "Configurare server de instalare"

#: standalone/drakpxe:112
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""

#: standalone/drakpxe:143
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
"Vă rog să alegeţi ce interfaţă de reţea va fi utilizată de către serverul "
"DHCP."

#: standalone/drakpxe:144
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Interfaţă %s (în reţeaua %s)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"Serverul DHCP va permite altor calculatoare să demareze folosind PXE în gama "
"de adrese dată.\n"
"\n"
"Adresa reţelei este %s folosind masca de reţea %s.\n"
"\n"

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr "IP de inceput pt. DHCP"

#: standalone/drakpxe:174
#, c-format
msgid "The DHCP end ip"
msgstr "IP de final pt. DHCP"

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Vă rog să indicaţi unde va fi disponibilă imaginea instalării.\n"
"\n"
"Dacă nu aveţi un director existent, copiaţi conţinutul\n"
"de pe CD sau DVD\n"
"\n"

#: standalone/drakpxe:192
#, c-format
msgid "Installation image directory"
msgstr "Directorul de instalare a imaginilor"

#: standalone/drakpxe:196
#, c-format
msgid "No image found"
msgstr "Nu am găsit nici o imagine"

#: standalone/drakpxe:197
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""

#: standalone/drakpxe:215
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Poziţia fişierului auto_install.cfg"

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:53
#, c-format
msgid "Ignore"
msgstr "Ignoră"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:101
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:154 standalone/harddrake2:202
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Descrierea câmpurilor:\n"
"\n"

#: standalone/draksec:168
#, c-format
msgid "(default value: %s)"
msgstr "(valoare implicită: %s)"

#: standalone/draksec:210
#, c-format
msgid "Security Level:"
msgstr "Nivel de securitate:"

#: standalone/draksec:217
#, c-format
msgid "Security Administrator:"
msgstr "Administrator de securitate:"

#: standalone/draksec:219
#, c-format
msgid "Basic options"
msgstr "Opţiuni de bază"

#: standalone/draksec:233
#, c-format
msgid "Network Options"
msgstr "Opţiuni reţea"

#: standalone/draksec:233
#, c-format
msgid "System Options"
msgstr "Opţiuni sistem"

#: standalone/draksec:268
#, c-format
msgid "Periodic Checks"
msgstr "Verificări periodice"

#: standalone/draksec:298
#, c-format
msgid "Please wait, setting security level..."
msgstr "Vă rog să aşteptaţi, configurez nivelul de securitate..."

#: standalone/draksec:304
#, c-format
msgid "Please wait, setting security options..."
msgstr "Vă rog să aşteptaţi, configurez opţiunile de securitate..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "Nu am detectat nici o placă de sunet!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:57
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Notă: dacă aveţi o placă de sunet ISA PnP, trebuie să folosiţi programul "
"sndconfig. Tastaţi \"sndconfig\" într-o consolă. "

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: standalone/draksplash:68
#, c-format
msgid "first step creation"
msgstr "Creare primul pas"

#: standalone/draksplash:71
#, c-format
msgid "final resolution"
msgstr "Rezoluţie finală"

#: standalone/draksplash:72
#, c-format
msgid "choose image file"
msgstr "Selectaţi un fişier imagine"

#: standalone/draksplash:73
#, c-format
msgid "Theme name"
msgstr "Nume temă"

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "Navighează"

#: standalone/draksplash:93 standalone/draksplash:158
#, c-format
msgid "Configure bootsplash picture"
msgstr "Configurare imagine de la demaraj"

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr ""

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr ""

#: standalone/draksplash:119
#, c-format
msgid "Preview"
msgstr "Previzualizare"

#: standalone/draksplash:121
#, c-format
msgid "Save theme"
msgstr "Înregistrează tema"

#: standalone/draksplash:122
#, c-format
msgid "Choose color"
msgstr "Alegeţi culoarea"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr "Afişează logo pe consolă"

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr ""

#: standalone/draksplash:161 standalone/draksplash:309
#: standalone/draksplash:454
#, c-format
msgid "Notice"
msgstr "Notificare"

#: standalone/draksplash:161 standalone/draksplash:309
#, c-format
msgid "This theme does not yet have a bootsplash in %s!"
msgstr ""

#: standalone/draksplash:167
#, c-format
msgid "choose image"
msgstr "Selectaţi o imagine"

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:435
#, c-format
msgid "ProgressBar color selection"
msgstr "Selectare culoare bară de evoluţie (ProgressBar)"

#: standalone/draksplash:454
#, c-format
msgid "You must choose an image file first!"
msgstr "Trebuie ca mai întâi să alegeţi o imagine!"

#: standalone/draksplash:459
#, c-format
msgid "Generating preview..."
msgstr "Generez previzualizarea..."

#. -PO:  First %s is theme name, second %s (in parenthesis) is resolution
#: standalone/draksplash:497
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/draksplash:503
#, c-format
msgid ""
"The image \"%s\" cannot be load due to the following issue:\n"
"\n"
"<span foreground=\"Red\">%s</span>"
msgstr ""

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "Adăugă un element"

#: standalone/drakups:83
#, fuzzy, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"Bine aţi venit la utilitarul de configurare email.\n"
"\n"
"Aici puteţi configura sistemul dvs. de alertare.\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:93
#, fuzzy, c-format
msgid "Autodetection"
msgstr "Auto-detecţie"

#: standalone/drakups:101 standalone/harddrake2:231
#, c-format
msgid "Detection in progress"
msgstr "Detecţia este în progres..."

#: standalone/drakups:120 standalone/drakups:156 standalone/logdrake:449
#: standalone/logdrake:455
#, c-format
msgid "Congratulations"
msgstr "Felicitări"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "Nu am găsit nici un dispozitiv"

#: standalone/drakups:128 standalone/drakups:140
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "Configurare imprimante CUPS"

#: standalone/drakups:128
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "Vă rog să testaţi mausul:"

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr ""

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "Nume:"

#: standalone/drakups:145
#, fuzzy, c-format
msgid "The name of your ups"
msgstr "numele procesorului"

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "Port:"

#: standalone/drakups:149
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "tipul de magistrală la care este conectat mausul"

#: standalone/drakups:156
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:246
#, fuzzy, c-format
msgid "UPS devices"
msgstr "Servicii"

#: standalone/drakups:247 standalone/drakups:266 standalone/drakups:282
#: standalone/harddrake2:83 standalone/harddrake2:109
#: standalone/harddrake2:116
#, c-format
msgid "Name"
msgstr "Nume"

#: standalone/drakups:265
#, fuzzy, c-format
msgid "UPS users"
msgstr "Utilizatori"

#: standalone/drakups:281
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "acces la uneltele de reţea"

#: standalone/drakups:282
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:294
#, c-format
msgid "Rules"
msgstr "Reguli"

#: standalone/drakups:295
#, c-format
msgid "Action"
msgstr "Acţiune"

#: standalone/drakups:295 standalone/drakvpn:1146 standalone/harddrake2:80
#, c-format
msgid "Level"
msgstr "Nivel"

#: standalone/drakups:295
#, fuzzy, c-format
msgid "ACL name"
msgstr "Nume LVM?"

#: standalone/drakups:325 standalone/drakups:329 standalone/drakups:338
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Dvorak (US)"

#: standalone/drakups:335
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Test de configuraţie"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Dvorak (US)"

#: standalone/drakvpn:95
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "Partajarea conexiunii la Internet este acum activată."

#: standalone/drakvpn:96
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Configurarea partajării conexiunii la Internet a fost făcută deja.\n"
"Acum este dezactivată.\n"
"\n"
"Ce doriţi să facem?"

#: standalone/drakvpn:105
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "Dezactivez serverele..."

#: standalone/drakvpn:114
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "Partajarea conexiunii la Internet este acum dezactivată."

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "Partajarea conexiunii la Internet este dezactivată."

#: standalone/drakvpn:122
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Configurarea partajării conexiunii la Internet a fost făcută deja.\n"
"Acum este dezactivată.\n"
"\n"
"Ce doriţi să facem?"

#: standalone/drakvpn:135
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr "Activez serverele..."

#: standalone/drakvpn:141
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "Partajarea conexiunii la Internet este acum activată."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "Elimină un modul"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:292
#, fuzzy, c-format
msgid "Security Policies"
msgstr "Alertări de securitate:"

#: standalone/drakvpn:292
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:295 standalone/drakvpn:306
#, fuzzy, c-format
msgid "Configuration file"
msgstr "Configuraţie"

#: standalone/drakvpn:296
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:307
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:325 standalone/drakvpn:685
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s sectori"

#: standalone/drakvpn:326
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:333 standalone/drakvpn:694
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "zilnic"

#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid "Commit"
msgstr "Comite"

#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
#: standalone/drakvpn:713
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "Configuraţie LAN"

#: standalone/drakvpn:352
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:368
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:369
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "config setup"
msgstr "Reconfigurează"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "conn %default"
msgstr "Implicit"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "normal conn"
msgstr "Mod normal"

#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
#, fuzzy, c-format
msgid "Exists!"
msgstr "Ieşire"

#: standalone/drakvpn:383 standalone/drakvpn:424
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:400
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:405
#, fuzzy, c-format
msgid "interfaces"
msgstr "Interfaţă"

#: standalone/drakvpn:406
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:409
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:410
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:444
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:451
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:452
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:453
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:454
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:455 standalone/drakvpn:494
#, c-format
msgid "left"
msgstr "stânga"

#: standalone/drakvpn:456 standalone/drakvpn:495
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:457 standalone/drakvpn:496
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:458 standalone/drakvpn:497
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:459 standalone/drakvpn:498
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:491
#, fuzzy, c-format
msgid "section name"
msgstr "Nume de conexiune"

#: standalone/drakvpn:492
#, fuzzy, c-format
msgid "authby"
msgstr "Cale"

#: standalone/drakvpn:493
#, fuzzy, c-format
msgid "auto"
msgstr "Despre"

#: standalone/drakvpn:499
#, c-format
msgid "right"
msgstr "dreapta"

#: standalone/drakvpn:500
#, fuzzy, c-format
msgid "rightcert"
msgstr "Foarte ridicată"

#: standalone/drakvpn:501
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:502
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:503
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:511
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:543
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:576 standalone/drakvpn:826
#, fuzzy, c-format
msgid "Edit section"
msgstr "Selectare cale"

#: standalone/drakvpn:577
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
#: standalone/drakvpn:877
#, fuzzy, c-format
msgid "Section names"
msgstr "Nume de conexiune"

#: standalone/drakvpn:590
#, fuzzy, c-format
msgid "Can not edit!"
msgstr "Nu pot deschide %s!"

#: standalone/drakvpn:591
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:600
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:611
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:624
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:645
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:656 standalone/drakvpn:873
#, fuzzy, c-format
msgid "Remove section"
msgstr "Şterge listă"

#: standalone/drakvpn:657 standalone/drakvpn:874
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:686
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:728
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "path"
msgstr "Cale"

#: standalone/drakvpn:735
#, c-format
msgid "remote"
msgstr "la distanţă"

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "sainfo"
msgstr "Info"

#: standalone/drakvpn:743
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:746
#, fuzzy, c-format
msgid "path type"
msgstr "Schimbă tipul"

#: standalone/drakvpn:750
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:770 standalone/drakvpn:863
#, fuzzy, c-format
msgid "real file"
msgstr "Selectează fişierul"

#: standalone/drakvpn:793
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:810
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:827
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:838
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:847
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:855
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:862
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:903
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:923
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:924
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:941
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Protocol European"

#: standalone/drakvpn:942
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:956
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:957
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:974
#, fuzzy, c-format
msgid "Sainfo destination protocol"
msgstr "Unealta de migrare Windows"

#: standalone/drakvpn:975
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:991
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:996
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "un număr"

#: standalone/drakvpn:997
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1015
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1031 standalone/drakvpn:1116
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "autentificare"

#: standalone/drakvpn:1033
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "autentificare"

#: standalone/drakvpn:1035
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1036
#, fuzzy, c-format
msgid "deflate"
msgstr "Implicit"

#: standalone/drakvpn:1043
#, c-format
msgid "Remote"
msgstr "La distanţă"

#: standalone/drakvpn:1044
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1052
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "Mod de formare număr"

#: standalone/drakvpn:1054
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1060
#, fuzzy, c-format
msgid "Generate policy"
msgstr "Securitate"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "off"
msgstr "dezactivată"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "on"
msgstr "în"

#: standalone/drakvpn:1062
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1076
#, fuzzy, c-format
msgid "Passive"
msgstr "Palestina"

#: standalone/drakvpn:1078
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1081
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1083
#, fuzzy, c-format
msgid "My certfile"
msgstr "Selectează fişierul"

#: standalone/drakvpn:1084
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "Nume imprimantă"

#: standalone/drakvpn:1085
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1086
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "Nume imprimantă"

#: standalone/drakvpn:1087
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "Selectează fişierul"

#: standalone/drakvpn:1088
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1089
#, fuzzy, c-format
msgid "Verify cert"
msgstr "foarte simpatic"

#: standalone/drakvpn:1091
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1093
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1094
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1114
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "Imprimantă"

#: standalone/drakvpn:1115
#, fuzzy, c-format
msgid "Proposal"
msgstr "Protocol"

#: standalone/drakvpn:1117
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "DH group"
msgstr "Grup"

#: standalone/drakvpn:1133
#, c-format
msgid "Command"
msgstr "Comandă"

#: standalone/drakvpn:1134
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1135
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1136
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Protocol European"

#: standalone/drakvpn:1136 standalone/drakvpn:1143
#, fuzzy, c-format
msgid "any"
msgstr "Zi"

#: standalone/drakvpn:1138
#, c-format
msgid "Flag"
msgstr "Steag"

#: standalone/drakvpn:1139
#, c-format
msgid "Direction"
msgstr "Direcţie"

#: standalone/drakvpn:1140
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "ipsec"
msgstr "Msec"

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "discard"
msgstr "dezactivat"

#: standalone/drakvpn:1143
#, c-format
msgid "Mode"
msgstr "Mod"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "tunnel"
msgstr "Canal"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "transport"
msgstr "transmis"

#: standalone/drakvpn:1145
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Staţie de lucru"

#: standalone/drakvpn:1146
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1146
#, c-format
msgid "default"
msgstr "Implicit"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "use"
msgstr "Maus"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "unique"
msgstr "Martinica"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "Statele unite (eter)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "Statele unite (cablu)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr "Statele unite (cablu-hrc)"

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "Canada (cablu)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "Japonia (eter)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "Japonia (cablu)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "China (eter)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "Europa de vest"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "Europa de est"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "Franţa [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "Noua Zeelandă"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Vă rog\n"
"Introduceţi ţara şi norma TV"

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr "Norma TV :"

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "Zona :"

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr "Scanarea canalelor TV este în progres..."

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr "Scanez canalele TV"

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "A fost detectată o eroare la căutarea canalelor TV"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "Vă urez o zi bună!"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Acum, puteţi rula xawtv (sub X Window!) !\n"

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr "Nu am detectat nici o placă TV!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Nu a fost detectată nici o placă TV în calculatorul dvs. Vă rog să "
"verificaţi dacă placa TV cu susţinere în Linux este introdusă corect.\n"
"\n"
"\n"
"Puteţi vizita baza de date de echipamente la:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/harddrake2:23
#, c-format
msgid "Alternative drivers"
msgstr "Drivere alternative"

#: standalone/harddrake2:24
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "lista driverelor alternative pentru această placa de sunet"

#: standalone/harddrake2:27
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
"aceasta este magistrala fizică la care este conectat dispozitivul (ex. PCI, "
"USB, ...)"

#: standalone/harddrake2:29 standalone/harddrake2:144
#, c-format
msgid "Bus identification"
msgstr "Identificare magistrală"

#: standalone/harddrake2:30
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:33
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:36
#, c-format
msgid "Drive capacity"
msgstr "Capacitate unitate"

#: standalone/harddrake2:36
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:37
#, c-format
msgid "this field describes the device"
msgstr "acest câmp descrie dispozitivul"

#: standalone/harddrake2:38
#, c-format
msgid "Old device file"
msgstr "Fişier dispozitiv vechi"

#: standalone/harddrake2:39
#, c-format
msgid "old static device name used in dev package"
msgstr "nume dispozitiv static vechi folosit în pachetul dev"

#: standalone/harddrake2:40
#, c-format
msgid "New devfs device"
msgstr "Dispozitiv nou devfs"

#: standalone/harddrake2:41
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "nume dispozitiv dinamic nou generat de devfs din nucleu"

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:44
#, c-format
msgid "Module"
msgstr "Module"

#: standalone/harddrake2:44
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "modulul nucleului GNU/Linux ce va controla dispozitivul"

#: standalone/harddrake2:45
#, fuzzy, c-format
msgid "Extended partitions"
msgstr "Creează o nouă partiţie"

#: standalone/harddrake2:45
#, fuzzy, c-format
msgid "the number of extended partitions"
msgstr "numărul de serie al procesorului"

#: standalone/harddrake2:46
#, c-format
msgid "Geometry"
msgstr "Geometrie"

#: standalone/harddrake2:46
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "Disk controller"
msgstr "Controllere SMBus"

#: standalone/harddrake2:47
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:48
#, c-format
msgid "class of hardware device"
msgstr "clasă dispozitiv"

#: standalone/harddrake2:49 standalone/harddrake2:81
#: standalone/printerdrake:211
#, c-format
msgid "Model"
msgstr "Model"

#: standalone/harddrake2:49
#, c-format
msgid "hard disk model"
msgstr "Model disc fix"

#: standalone/harddrake2:50
#, c-format
msgid "network printer port"
msgstr "Port Imprimantă de reţea"

#: standalone/harddrake2:51
#, fuzzy, c-format
msgid "Primary partitions"
msgstr "Formatare partiţii"

#: standalone/harddrake2:51
#, fuzzy, c-format
msgid "the number of the primary partitions"
msgstr "numărul de serie al procesorului"

#: standalone/harddrake2:52
#, c-format
msgid "the vendor name of the device"
msgstr "nume dat de vânzător pt. dispozitiv"

#: standalone/harddrake2:53
#, c-format
msgid "Bus PCI #"
msgstr ""

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "the PCI bus on which the device is plugged"
msgstr ""
"aceasta este magistrala fizică la care este conectat dispozitivul (ex. PCI, "
"USB, ...)"

#: standalone/harddrake2:54
#, fuzzy, c-format
msgid "PCI device #"
msgstr "Servicii"

#: standalone/harddrake2:54
#, fuzzy, c-format
msgid "PCI device number"
msgstr "un număr"

#: standalone/harddrake2:55
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:55
#, fuzzy, c-format
msgid "PCI function number"
msgstr "Nume de conexiune"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "Vendor ID"
msgstr "Vânzător"

#: standalone/harddrake2:56
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "Device ID"
msgstr "Periferic: "

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "this is the numerical identifier of the device"
msgstr "nume dat de vânzător pt. dispozitiv"

#: standalone/harddrake2:58
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:58
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "Servicii"

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "nume dat de vânzător pt. dispozitiv"

#: standalone/harddrake2:60
#, fuzzy, c-format
msgid "Device USB ID"
msgstr "Periferic: "

#: standalone/harddrake2:60
#, c-format
msgid ".."
msgstr ""

#: standalone/harddrake2:64
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:64
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:65
#, c-format
msgid "Cache size"
msgstr "Mărime cache "

#: standalone/harddrake2:65
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "dimensiune cache procesor (nivel doi)"

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:68
#, c-format
msgid "Coma bug"
msgstr "Eroare tip Coma"

#: standalone/harddrake2:68
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "dacă acest procesor are eroarea Cyrix 6x86 Coma"

#: standalone/harddrake2:69
#, c-format
msgid "Cpuid family"
msgstr "Familie CPUid"

#: standalone/harddrake2:69
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "familia procesorului (ex. 6 pt. clasa i686)"

#: standalone/harddrake2:70
#, c-format
msgid "Cpuid level"
msgstr "Nivel CPUid"

#: standalone/harddrake2:70
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Frequency (MHz)"
msgstr "Frecvenţă (MHz)"

#: standalone/harddrake2:71
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:72
#, c-format
msgid "Flags"
msgstr "Indicatori"

#: standalone/harddrake2:72
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "Indicatorii procesorului raportaţi de nucleu"

#: standalone/harddrake2:73
#, c-format
msgid "Fdiv bug"
msgstr "Eroare tip FDIV"

#: standalone/harddrake2:74
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Is FPU present"
msgstr "Există FPU?"

#: standalone/harddrake2:75
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "da, procesorul are un coprocesor matematic"

#: standalone/harddrake2:76
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Dacă FPU are un vector IRQ"

#: standalone/harddrake2:76
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr "da, coprocesorul matematic are ataşat un vector de excepţii"

#: standalone/harddrake2:77
#, c-format
msgid "F00f bug"
msgstr "Eroare tip F00F"

#: standalone/harddrake2:77
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
"primele Pentium-uri aveau erori şi se blocau la decodarea secvenţei F00F"

#: standalone/harddrake2:78
#, c-format
msgid "Halt bug"
msgstr "Eroare tip halt"

#: standalone/harddrake2:79
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr "generaţie procesor (ex. 8 pt. Pentium III,...)"

#: standalone/harddrake2:82
#, c-format
msgid "Model name"
msgstr "Nume model"

#: standalone/harddrake2:82
#, c-format
msgid "official vendor name of the cpu"
msgstr "nume oficial vânzător pt. procesor"

#: standalone/harddrake2:83
#, c-format
msgid "the name of the CPU"
msgstr "numele procesorului"

#: standalone/harddrake2:84
#, c-format
msgid "Processor ID"
msgstr "ID Procesor"

#: standalone/harddrake2:84
#, c-format
msgid "the number of the processor"
msgstr "numărul de serie al procesorului"

#: standalone/harddrake2:85
#, c-format
msgid "Model stepping"
msgstr "Pasul modelului"

#: standalone/harddrake2:85
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "stepping-ul procesorului (număr sub-model (generaţia))"

#: standalone/harddrake2:86
#, c-format
msgid "the vendor name of the processor"
msgstr "nume dat de vânzător pt. procesor"

#: standalone/harddrake2:87
#, c-format
msgid "Write protection"
msgstr "Protecţie la scriere"

#: standalone/harddrake2:87
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:91
#, c-format
msgid "Floppy format"
msgstr "Formatează discheta"

#: standalone/harddrake2:91
#, c-format
msgid "format of floppies supported by the drive"
msgstr "formate de dischete suportate de unitate"

#: standalone/harddrake2:95
#, c-format
msgid "Channel"
msgstr "Canal"

#: standalone/harddrake2:95
#, c-format
msgid "EIDE/SCSI channel"
msgstr "Canal EIDE/SCSI"

#: standalone/harddrake2:96
#, fuzzy, c-format
msgid "Disk identifier"
msgstr "Imprimantă"

#: standalone/harddrake2:96
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:97
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "Nume volum logic "

#: standalone/harddrake2:97
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:104
#, fuzzy, c-format
msgid "Installed size"
msgstr "Instalare sistem"

#: standalone/harddrake2:104
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:105
#, fuzzy, c-format
msgid "Enabled Size"
msgstr "Activează"

#: standalone/harddrake2:105
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:106
#, fuzzy, c-format
msgid "type of the memory device"
msgstr "nume dat de vânzător pt. dispozitiv"

#: standalone/harddrake2:107
#, c-format
msgid "Speed"
msgstr "Viteză"

#: standalone/harddrake2:107
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, fuzzy, c-format
msgid "Bank connections"
msgstr "Conexiune pe cablu"

#: standalone/harddrake2:109
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:113
#, fuzzy, c-format
msgid "Device file"
msgstr "Fişier dispozitiv vechi"

#: standalone/harddrake2:113
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""

#: standalone/harddrake2:114
#, c-format
msgid "Emulated wheel"
msgstr ""

#: standalone/harddrake2:114
#, fuzzy, c-format
msgid "whether the wheel is emulated or not"
msgstr "3 butoane cu rotiţă emulată"

#: standalone/harddrake2:115
#, fuzzy, c-format
msgid "the type of the mouse"
msgstr "Vă rog să testaţi mausul"

#: standalone/harddrake2:116
#, fuzzy, c-format
msgid "the name of the mouse"
msgstr "numele procesorului"

#: standalone/harddrake2:117
#, c-format
msgid "Number of buttons"
msgstr "Număr butoane"

#: standalone/harddrake2:117
#, c-format
msgid "the number of buttons the mouse has"
msgstr "numărul de butoane pe care le are mausul"

#: standalone/harddrake2:118
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "tipul de magistrală la care este conectat mausul"

#: standalone/harddrake2:119
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:119
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:126 standalone/harddrake2:135
#: standalone/harddrake2:142 standalone/harddrake2:150
#: standalone/harddrake2:316
#, c-format
msgid "Identification"
msgstr "Identificare"

#: standalone/harddrake2:127 standalone/harddrake2:143
#, c-format
msgid "Connection"
msgstr "Conectare"

#: standalone/harddrake2:136
#, fuzzy, c-format
msgid "Performances"
msgstr "Preferinţe"

#: standalone/harddrake2:137
#, fuzzy, c-format
msgid "Bugs"
msgstr "Magistrală"

#: standalone/harddrake2:138
#, c-format
msgid "FPU"
msgstr ""

#: standalone/harddrake2:146
#, c-format
msgid "Partitions"
msgstr "Partiții"

#: standalone/harddrake2:151
#, c-format
msgid "Features"
msgstr "Caracteristici"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:174 standalone/logdrake:77
#: standalone/printerdrake:134 standalone/printerdrake:147
#, c-format
msgid "/_Options"
msgstr "/_Opţiuni"

#: standalone/harddrake2:175 standalone/harddrake2:197 standalone/logdrake:79
#: standalone/printerdrake:159 standalone/printerdrake:161
#: standalone/printerdrake:164 standalone/printerdrake:166
#, c-format
msgid "/_Help"
msgstr "/_Ajutor"

#: standalone/harddrake2:179
#, c-format
msgid "/Autodetect _printers"
msgstr "/Auto-detecţie im_primante"

#: standalone/harddrake2:180
#, c-format
msgid "/Autodetect _modems"
msgstr "/Auto-detecţie _MODEM-uri"

#: standalone/harddrake2:181
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Auto-detecţie unităţi _JAZ"

#: standalone/harddrake2:188
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:188 standalone/printerdrake:140
#, c-format
msgid "/_Quit"
msgstr "/_Termină"

#: standalone/harddrake2:199
#, c-format
msgid "/_Fields description"
msgstr "/Descriere câmpuri"

#: standalone/harddrake2:201
#, c-format
msgid "Harddrake help"
msgstr "Ajutor HardDrake"

#: standalone/harddrake2:210
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:216 standalone/printerdrake:164
#, c-format
msgid "/_Report Bug"
msgstr "/_Raportare eroare"

#: standalone/harddrake2:218 standalone/printerdrake:166
#, c-format
msgid "/_About..."
msgstr "/Despre..."

#: standalone/harddrake2:219
#, c-format
msgid "About Harddrake"
msgstr "Despre HardDrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:221
#, fuzzy, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"Acesta este HardDrake, o unealtă Mandrake de configurare a echipamentelor.\n"
"<span foreground=\"royalblue3\">Versiune:</span> %s\n"
"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"

#: standalone/harddrake2:238
#, fuzzy, c-format
msgid "Harddrake2"
msgstr "HardDrake"

#: standalone/harddrake2:253
#, c-format
msgid "Detected hardware"
msgstr "Echipamente detectate"

#: standalone/harddrake2:258
#, c-format
msgid "Configure module"
msgstr "Configurare module"

#: standalone/harddrake2:265
#, c-format
msgid "Run config tool"
msgstr "Execută unealta de configurare"

#: standalone/harddrake2:303 standalone/net_monitor:108
#: standalone/net_monitor:109 standalone/net_monitor:114
#, c-format
msgid "unknown"
msgstr "Necunoscut"

#: standalone/harddrake2:304 standalone/printerdrake:298
#: standalone/printerdrake:336
#, c-format
msgid "Unknown"
msgstr "Necunoscut"

#: standalone/harddrake2:324
#, c-format
msgid "Misc"
msgstr "Diverse"

#: standalone/harddrake2:339
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""
"Clic pe un dispozitiv din arborele din stânga pentru a-i afişa informaţiile "
"aici."

#: standalone/harddrake2:391
#, c-format
msgid "secondary"
msgstr "secundar"

#: standalone/harddrake2:391
#, c-format
msgid "primary"
msgstr "principal"

#: standalone/harddrake2:395
#, c-format
msgid "burner"
msgstr "inscriptor"

#: standalone/harddrake2:395
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:525
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:530
#, c-format
msgid "Account:"
msgstr "Cont:"

#: standalone/harddrake2:531
#, c-format
msgid "Password:"
msgstr "Parola:"

#: standalone/harddrake2:532
#, c-format
msgid "Hostname:"
msgstr "Nume maşină:"

#: standalone/keyboarddrake:29
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Vă rog să alegeţi dispunerea tastaturii."

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Vreţi ca BackSpace să întoarcă Delete în consolă?"

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "LocaleDrake"

#: standalone/localedrake:67
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""
"Modificarea a fost făcută, dar pentru a intra în vigoare trebuie să vă "
"delogaţi"

#: standalone/logdrake:50
#, fuzzy, c-format
msgid "Mandrakelinux Tools Logs"
msgstr "Explicaţii utilitare Mandrakelinux"

#: standalone/logdrake:51
#, fuzzy, c-format
msgid "Logdrake"
msgstr "logdrake"

#: standalone/logdrake:64
#, c-format
msgid "Show only for the selected day"
msgstr "Afişează numai pentru ziua selectată"

#: standalone/logdrake:71
#, c-format
msgid "/File/_New"
msgstr "/Fişier/_Nou"

#: standalone/logdrake:71
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Open"
msgstr "/Fişier/_Deschide"

#: standalone/logdrake:72
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Save"
msgstr "/Fişier/_Salvează"

#: standalone/logdrake:73
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:74
#, c-format
msgid "/File/Save _As"
msgstr "/Fişier/S_alvează ca..."

#: standalone/logdrake:75
#, c-format
msgid "/File/-"
msgstr "/Fişier/-"

#: standalone/logdrake:78
#, c-format
msgid "/Options/Test"
msgstr "/Opţiuni/Testează"

#: standalone/logdrake:80
#, c-format
msgid "/Help/_About..."
msgstr "/Ajutor/_Despre..."

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:116
#, c-format
msgid "search"
msgstr "Căutare"

#: standalone/logdrake:128
#, c-format
msgid "A tool to monitor your logs"
msgstr "Utilitar pentru monitorizarea jurnalelor"

#: standalone/logdrake:129 standalone/net_monitor:99
#, c-format
msgid "Settings"
msgstr "Configurare"

#: standalone/logdrake:134
#, fuzzy, c-format
msgid "Matching"
msgstr "conţine"

#: standalone/logdrake:135
#, c-format
msgid "but not matching"
msgstr "dar nu conţine"

#: standalone/logdrake:139
#, c-format
msgid "Choose file"
msgstr "Selectare fişier"

#: standalone/logdrake:148
#, c-format
msgid "Calendar"
msgstr "Calendar"

#: standalone/logdrake:158
#, c-format
msgid "Content of the file"
msgstr "Conţinut fişier"

#: standalone/logdrake:162 standalone/logdrake:399
#, c-format
msgid "Mail alert"
msgstr "Alertare prin email"

#: standalone/logdrake:169
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr ""

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "Asteptaţi, parcurg fişierul: %s"

#: standalone/logdrake:376
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Server Apache-World Wide Web "

#: standalone/logdrake:377
#, c-format
msgid "Domain Name Resolver"
msgstr "Rezolvitor nume de domeniu"

#: standalone/logdrake:378
#, c-format
msgid "Ftp Server"
msgstr "Server FTP"

#: standalone/logdrake:379
#, c-format
msgid "Postfix Mail Server"
msgstr "Server de mail Postfix"

#: standalone/logdrake:380
#, c-format
msgid "Samba Server"
msgstr "Server SAMBA"

#: standalone/logdrake:382
#, c-format
msgid "Webmin Service"
msgstr "Serviciul Webmin"

#: standalone/logdrake:383
#, c-format
msgid "Xinetd Service"
msgstr "Serviciul xinetd"

#: standalone/logdrake:394
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "Configurează sistemul de tipărire CUPS"

#: standalone/logdrake:395
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:402
#, c-format
msgid "Mail alert configuration"
msgstr "Configurare alertare prin email"

#: standalone/logdrake:403
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Bine aţi venit la utilitarul de configurare email.\n"
"\n"
"Aici puteţi configura sistemul dvs. de alertare.\n"

#: standalone/logdrake:406
#, c-format
msgid "What do you want to do?"
msgstr "Ce doriţi să fac?"

#: standalone/logdrake:413
#, fuzzy, c-format
msgid "Services settings"
msgstr "Configurare servicii"

#: standalone/logdrake:414
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "Veţi fi anunţaţi dacă unul din serviciile selectate nu mai rulează"

#: standalone/logdrake:421
#, c-format
msgid "Load setting"
msgstr "Încarcă opţiune"

#: standalone/logdrake:422
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Veţi fi notificaţi dacă încărcarea este mai mare decăt această valoare"

#: standalone/logdrake:423
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:428
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "Configurare alertare"

#: standalone/logdrake:429
#, c-format
msgid "Please enter your email address below "
msgstr "Vă rog să introduceţi mai jos adresa dvs. de email "

#: standalone/logdrake:430
#, fuzzy, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""
"Introduceţi adresa IP şi portul gazdei a cărui imprimante doriţi să le "
"utilizaţi."

#: standalone/logdrake:449
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:455
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:514
#, c-format
msgid "Save as.."
msgstr "Salvează ca..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "Vă rog să alegeţi tipul de mouse."

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "Emulare 3 Butoane?"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "Test maus"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "Vă rog să testaţi mausul:"

#: standalone/net_applet:34
#, fuzzy, c-format
msgid "Network is up on interface %s"
msgstr "Interfaţa de reţea"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:42
#, fuzzy, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "Funcţionalitatea reţelei nu este configurată"

#: standalone/net_applet:57 standalone/net_monitor:473
#, c-format
msgid "Connect %s"
msgstr "Conectează %s"

#: standalone/net_applet:58 standalone/net_monitor:473
#, c-format
msgid "Disconnect %s"
msgstr "Deconectează %s"

#: standalone/net_applet:59
#, fuzzy, c-format
msgid "Monitor Network"
msgstr "Restaurează prin reţea"

#: standalone/net_applet:60
#, c-format
msgid "Configure Network"
msgstr "Configurare Reţea"

#: standalone/net_applet:69
#, fuzzy, c-format
msgid "Watched interface"
msgstr "Interfaţă"

#: standalone/net_applet:78
#, c-format
msgid "Profiles"
msgstr "Profile"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/net_applet:61 standalone/printerdrake:238
#, c-format
msgid "Refresh"
msgstr "Actualizare"

#: standalone/net_applet:62
#, c-format
msgid "Get Online Help"
msgstr ""

#: standalone/net_applet:177
#, fuzzy, c-format
msgid "Interactive intrusion detection"
msgstr "Activează detectarea intervalelor mute"

#: standalone/net_applet:181
#, c-format
msgid "Always launch on startup"
msgstr "Lansează întotdeauna la pornire"

#: standalone/net_applet:230
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr ""

#: standalone/net_applet:231
#, fuzzy, c-format
msgid "The %s service has been attacked by %s."
msgstr "Acest eveniment a fost modificat."

#: standalone/net_applet:232
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr ""

#: standalone/net_applet:240
#, fuzzy, c-format
msgid "Active Firewall: intrusion detected"
msgstr "Am detectat o configuraţie de Firewall!"

#: standalone/net_applet:251
#, fuzzy, c-format
msgid "Do you want to blacklist the attacker?"
msgstr "Doriţi să corectaţi calea?"

#: standalone/net_applet:265
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr ""

#: standalone/net_applet:268
#, fuzzy, c-format
msgid "Attack details"
msgstr "Fără detalii"

#: standalone/net_applet:272
#, fuzzy, c-format
msgid "Attack time: %s"
msgstr "Acţiune: %s"

#: standalone/net_applet:273
#, fuzzy, c-format
msgid "Network interface: %s"
msgstr "Interfețe rețea"

#: standalone/net_applet:274
#, fuzzy, c-format
msgid "Attack type: %s"
msgstr "Tip acces: %s\n"

#: standalone/net_applet:275
#, fuzzy, c-format
msgid "Protocol: %s"
msgstr "Protocoale"

#: standalone/net_applet:276
#, fuzzy, c-format
msgid "Attacker IP address: %s"
msgstr "Adresă IP la _distanţă:"

#: standalone/net_applet:277
#, fuzzy, c-format
msgid "Attacker hostname: %s"
msgstr "Nu am putut încărca numele gazdei: %s\n"

#: standalone/net_applet:278
#, fuzzy, c-format
msgid "Service attacked: %s"
msgstr "_Tip serviciu:"

#: standalone/net_applet:279
#, fuzzy, c-format
msgid "Port attacked: %s"
msgstr "Port: %s"

#: standalone/net_applet:280
#, c-format
msgid "Type of ICMP attack: %s"
msgstr ""

#: standalone/net_monitor:61 standalone/net_monitor:66
#, c-format
msgid "Network Monitoring"
msgstr "Monitorizare reţea"

#: standalone/net_monitor:104
#, fuzzy, c-format
msgid "Global statistics"
msgstr "Statistici"

#: standalone/net_monitor:107
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:107
#, c-format
msgid "Average"
msgstr "Medie"

#: standalone/net_monitor:108
#, fuzzy, c-format
msgid ""
"Sending\n"
"speed:"
msgstr "Viteză transmisie:"

#: standalone/net_monitor:109
#, fuzzy, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr "Viteză recepţie:"

#: standalone/net_monitor:113
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "Timp conectare:"

#: standalone/net_monitor:120
#, c-format
msgid "Use same scale for received and transmitted"
msgstr ""

#: standalone/net_monitor:139
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Vă rog să aşteptaţi, testez conexiunea dvs..."

#: standalone/net_monitor:188 standalone/net_monitor:201
#, c-format
msgid "Disconnecting from Internet "
msgstr "Deconectare de la Internet "

#: standalone/net_monitor:188 standalone/net_monitor:201
#, c-format
msgid "Connecting to Internet "
msgstr "Conectez la Internet "

#: standalone/net_monitor:232
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Deconectarea de la Internet a eşuat."

#: standalone/net_monitor:233
#, c-format
msgid "Disconnection from Internet complete."
msgstr "Deconectarea de la Internet terminată."

#: standalone/net_monitor:235
#, c-format
msgid "Connection complete."
msgstr "Conectare reuşită."

#: standalone/net_monitor:236
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrakelinux Control Center."
msgstr ""
"Conectare eşuată.\n"
"Verificaţi configurarea în Centrul de control Mandrakelinux."

#: standalone/net_monitor:340
#, c-format
msgid "Color configuration"
msgstr "Configurare culori"

#: standalone/net_monitor:388 standalone/net_monitor:408
#, c-format
msgid "sent: "
msgstr "trimis: "

#: standalone/net_monitor:395 standalone/net_monitor:412
#, c-format
msgid "received: "
msgstr "recepţionat: "

#: standalone/net_monitor:402
#, c-format
msgid "average"
msgstr "medie"

#: standalone/net_monitor:405
#, c-format
msgid "Local measure"
msgstr "Măsuri locale"

#: standalone/net_monitor:466
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/net_monitor:477
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "Configurare conexiune la Internet"

#: standalone/printerdrake:68
#, c-format
msgid "Reading data of installed printers..."
msgstr "Citesc date despre imprimantele instalate..."

#: standalone/printerdrake:116
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "Administrare imprimare \n"

#: standalone/printerdrake:130 standalone/printerdrake:131
#: standalone/printerdrake:132 standalone/printerdrake:133
#: standalone/printerdrake:141 standalone/printerdrake:142
#: standalone/printerdrake:146
#, c-format
msgid "/_Actions"
msgstr "/_Acţiuni"

#: standalone/printerdrake:130 standalone/printerdrake:142
#, c-format
msgid "/_Add Printer"
msgstr "/_Adaugă imprimantă"

#: standalone/printerdrake:131
#, c-format
msgid "/Set as _Default"
msgstr "/Setează ca _implicit"

#: standalone/printerdrake:132
#, c-format
msgid "/_Edit"
msgstr "/_Editează"

#: standalone/printerdrake:133
#, c-format
msgid "/_Delete"
msgstr "/_Şterge"

#: standalone/printerdrake:134
#, c-format
msgid "/_Expert mode"
msgstr "Mod /_expert"

#: standalone/printerdrake:139
#, c-format
msgid "/_Refresh"
msgstr "/Actualiza_re"

#: standalone/printerdrake:146
#, c-format
msgid "/_Configure CUPS"
msgstr "/_Configurează CUPS"

#: standalone/printerdrake:181
#, c-format
msgid "Search:"
msgstr "Căutare:"

#: standalone/printerdrake:184
#, c-format
msgid "Apply filter"
msgstr "Aplică filtru"

#: standalone/printerdrake:211 standalone/printerdrake:218
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:211 standalone/printerdrake:218
#, c-format
msgid "Printer Name"
msgstr "Nume imprimantă"

#: standalone/printerdrake:211
#, c-format
msgid "Connection Type"
msgstr "Tip conexiune"

#: standalone/printerdrake:218
#, c-format
msgid "Server Name"
msgstr "Nume server"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:226
#, c-format
msgid "Add Printer"
msgstr "Adaugă imprimantă"

#: standalone/printerdrake:226
#, c-format
msgid "Add a new printer to the system"
msgstr "Adaugă o nouă imprimantă la sistem"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:229
#, c-format
msgid "Set as default"
msgstr "Stabileşte ca implicit"

#: standalone/printerdrake:229
#, c-format
msgid "Set selected printer as the default printer"
msgstr ""

#: standalone/printerdrake:232
#, c-format
msgid "Edit selected printer"
msgstr "Editare imprimantă selectată"

#: standalone/printerdrake:235
#, c-format
msgid "Delete selected printer"
msgstr "Şterge imprimanta selectată"

#: standalone/printerdrake:238
#, c-format
msgid "Refresh the list"
msgstr "Actualizare listă utilizatori"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:241
#, c-format
msgid "Configure CUPS"
msgstr "Configurează CUPS"

#: standalone/printerdrake:241
#, c-format
msgid "Configure CUPS printing system"
msgstr "Configurează sistemul de tipărire CUPS"

#: standalone/printerdrake:299 standalone/printerdrake:337
#, c-format
msgid "Enabled"
msgstr "Activat"

#: standalone/printerdrake:300 standalone/printerdrake:338
#, c-format
msgid "Disabled"
msgstr "Dezactivat"

#: standalone/printerdrake:560
#, c-format
msgid "Authors: "
msgstr "Autori: "

#. -PO: here %s is the version number
#: standalone/printerdrake:570
#, fuzzy, c-format
msgid "Printer Management %s"
msgstr "Administrare imprimare \n"

#: standalone/scannerdrake:51
#, fuzzy, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr "Pachetul %s trebuie instalat. Doriţi să îl instalez?"

#: standalone/scannerdrake:55
#, fuzzy, c-format
msgid "Aborting Scannerdrake."
msgstr "Scannerdrake"

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: standalone/scannerdrake:67 standalone/scannerdrake:491
#, c-format
msgid "Searching for configured scanners..."
msgstr "Caut scannere configurate ..."

#: standalone/scannerdrake:71 standalone/scannerdrake:495
#, c-format
msgid "Searching for new scanners..."
msgstr "Caut noi scannere disponibile..."

#: standalone/scannerdrake:79 standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr "Re-generez lista de scannere configurate ..."

#: standalone/scannerdrake:101
#, fuzzy, c-format
msgid "The %s is not supported by this version of %s."
msgstr "%s nu are susţinere în această versiune a Mandrakelinux."

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "Am găsit %s la %s, doriţi să configurare automată?"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s nu este în baza de date de scannere, configuraţi manual?"

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "Alegeţi un model de scanner"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "Model detectat: %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "Port: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr ""

#: standalone/scannerdrake:144
#, fuzzy, c-format
msgid "The %s is not supported under Linux."
msgstr "%s nu are susţinere în această versiune a Mandrakelinux."

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr ""

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:200
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "Selectează fişierul"

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:258
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "Selectează fişierul"

#: standalone/scannerdrake:276
#, fuzzy, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "Selectează fişierul"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr "Scanner-ul %s nu este susţinut "

#: standalone/scannerdrake:304
#, fuzzy, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"Scanner-ul %s trebuie configurat de către PrinterDrake.\n"
"Puteţi lansa PrinterDrake în secţiunea Echipamente a Centrului de control "
"Mandrakelinux."

#: standalone/scannerdrake:308 standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, c-format
msgid "Auto-detect available ports"
msgstr "Auto-detecţie porturi disponibile"

#: standalone/scannerdrake:310 standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Vă rog să selectaţi dispozitivul la care este conectat %s."

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Notă: Porturile paralele nu au putut fi auto-detectate)"

#: standalone/scannerdrake:313 standalone/scannerdrake:358
#, c-format
msgid "choose device"
msgstr "Alegeţi dispozitivul"

#: standalone/scannerdrake:347
#, c-format
msgid "Searching for scanners..."
msgstr "Căutare scannere ..."

#: standalone/scannerdrake:383
#, fuzzy, c-format
msgid "Setting up kernel modules..."
msgstr "Elimină un modul"

#: standalone/scannerdrake:390 standalone/scannerdrake:397
#, fuzzy, c-format
msgid "Attention!"
msgstr "Atracție"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:392 standalone/scannerdrake:401
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""

#: standalone/scannerdrake:394 standalone/scannerdrake:403
#, fuzzy, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""
"Scannerul dvs. %s a fost configurat.\n"
"Acum puteţi scana documente folosind \"XSane\" din meniul de aplicaţii "
"Multimedia/Grafică."

#: standalone/scannerdrake:398
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""

#: standalone/scannerdrake:399
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:406
#, fuzzy, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"Scannerul dvs. %s a fost configurat.\n"
"Acum puteţi scana documente folosind \"XSane\" din meniul de aplicaţii "
"Multimedia/Grafică."

#: standalone/scannerdrake:431
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Următoarele scannere\n"
"\n"
"%s\n"
"sunt disponibile pe sistemul dvs.\n"

#: standalone/scannerdrake:432
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Următorul scanner\n"
"\n"
"%s\n"
"este disponibil pe sistemul dvs.\n"

#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Nu am gărit nici un scanner disponibil pe sistemul dvs.\n"

#: standalone/scannerdrake:452
#, c-format
msgid "Search for new scanners"
msgstr "Căutare de noi scannere ..."

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr "Adaugă manula un scanner"

#: standalone/scannerdrake:465
#, fuzzy, c-format
msgid "Install/Update firmware files"
msgstr "Selectează fişierul"

#: standalone/scannerdrake:471
#, c-format
msgid "Scanner sharing"
msgstr "Partajare scannere"

#: standalone/scannerdrake:530 standalone/scannerdrake:695
#, c-format
msgid "All remote machines"
msgstr "Toate maşinile de la distanţă"

#: standalone/scannerdrake:542 standalone/scannerdrake:845
#, c-format
msgid "This machine"
msgstr "(pe această maşină)"

#: standalone/scannerdrake:582
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:583
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Scanerele de pe această maşină sunt disponibile altor calculatoare"

#: standalone/scannerdrake:588
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Partajare scannere către gazdele:"

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr "Folosiţi scannere de pe alte calculatoare"

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Folosiţi scannerele de pe gazdele: "

#: standalone/scannerdrake:632 standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, c-format
msgid "Sharing of local scanners"
msgstr "Partajarea scannerelor locale"

#: standalone/scannerdrake:633
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:644 standalone/scannerdrake:794
#, c-format
msgid "Add host"
msgstr "Adăugare gazdă"

#: standalone/scannerdrake:650 standalone/scannerdrake:800
#, c-format
msgid "Edit selected host"
msgstr "Editare gazdă selectată"

#: standalone/scannerdrake:659 standalone/scannerdrake:809
#, c-format
msgid "Remove selected host"
msgstr "Şterge gazda selectată"

#: standalone/scannerdrake:683 standalone/scannerdrake:691
#: standalone/scannerdrake:696 standalone/scannerdrake:742
#: standalone/scannerdrake:833 standalone/scannerdrake:841
#: standalone/scannerdrake:846 standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr "Nume/adresă IP a gazdei:"

#: standalone/scannerdrake:705 standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:716 standalone/scannerdrake:866
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Trebuie să introduceţi un nume de gazdă sau o adresă IP.\n"

#: standalone/scannerdrake:727 standalone/scannerdrake:877
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Această gazdă este deja în listă, nu poate fi adăugată din nou.\n"

#: standalone/scannerdrake:782
#, c-format
msgid "Usage of remote scanners"
msgstr "Folosirea scannerelor de la distanţă"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Acestea sunt maşinile de pe care vor fi folosite scannerele:"

#: standalone/scannerdrake:940
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr "Pachetul %s trebuie instalat. Doriţi să îl instalez?"

#: standalone/scannerdrake:944 standalone/scannerdrake:948
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: standalone/service_harddrake:104
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Unele dispozitive din clasa de echipamente \"%s\" au fost şterse:\n"

#: standalone/service_harddrake:105
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:108
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "Au fost adăugate câteva dispozitive:\n"

#: standalone/service_harddrake:109
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:204
#, c-format
msgid "Hardware probing in progress"
msgstr "Detecţia echipamentelor este în progres..."

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "Doriţi să testaţi configuraţia ?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Alegeţi limba"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Licenţă"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Configurare mouse"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Detecţia discului fix"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Alegeţi tipul de instalare"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Alegeţi tastatura"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Partiţionare"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Formatare partiţii"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Alegeţi pachetele de instalat"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Instalare sistem"

#: steps.pm:25
#, fuzzy, c-format
msgid "Administrator password"
msgstr "Alegeţi parola pentru root"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Adaugă un utilizator"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Configurare reţea"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Instalare gestionar de demaraj"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Configurare X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Configurare servicii"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Instalare actualizări pt. sistem"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Ieşire din instalare"

#: ugtk2.pm:900
#, c-format
msgid "Is this correct?"
msgstr "E corect ?"

#: ugtk2.pm:960
#, fuzzy, c-format
msgid "No file chosen"
msgstr "selector fişiere"

#: ugtk2.pm:962
#, fuzzy, c-format
msgid "You have chosen a file, not a directory"
msgstr "Salvează a_taşamentele în directorul:"

#: ugtk2.pm:964
#, fuzzy, c-format
msgid "You have chosen a directory, not a file"
msgstr "Numele „/” poate fi doar un director, nu o cheie"

#: ugtk2.pm:966
#, fuzzy, c-format
msgid "No such directory"
msgstr "Nu e un director"

#: ugtk2.pm:966
#, fuzzy, c-format
msgid "No such file"
msgstr "Nu există fişierul „%s”\n"

#: ugtk2.pm:1045
#, c-format
msgid "Expand Tree"
msgstr "Expandare arbore"

#: ugtk2.pm:1046
#, c-format
msgid "Collapse Tree"
msgstr "Restrângere arbore"

#: ugtk2.pm:1047
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Basculare între plat şi triere în funcţie de grup"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s nu este instalat\n"
"Apăsaţi \"Înainte\" pentru a instala sau \"Renunţă\" pentru a ieşi"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "Instalarea a eşuat"

#, fuzzy
#~ msgid "MandrakeSoft Wizards"
#~ msgstr "Centrul de control Mandrakelinux"

#~ msgid ""
#~ "No browser is installed on your system, Please install one if you want to "
#~ "browse the help system"
#~ msgstr ""
#~ "Nu este instalat nici un navigator pe sistem, vă rog instalaţi unul "
#~ "pentru  a naviga în sistemul de ajutor"

#~ msgid "Installing HPOJ package..."
#~ msgstr "Instalare pachete HPOJ..."

#~ msgid ""
#~ "Insert a floppy in drive\n"
#~ "All data on this floppy will be lost"
#~ msgstr ""
#~ "Introduceţi o dischetă în unitate\n"
#~ "Toate datele de pe această dischetă se vor pierde"

#~ msgid "Insert a FAT formatted floppy in drive %s"
#~ msgstr "Introduceţi o dischetă formatată FAT în unitatea %s"

#~ msgid "This floppy is not FAT formatted"
#~ msgstr "Acestă dischetă nu este formatată FAT"

#~ msgid "Load/Save on floppy"
#~ msgstr "Încarcă/Înregistrează (de) pe dischetă"

#~ msgid "Load from floppy"
#~ msgstr "Încarcă de pe dischetă"

#~ msgid "Save on floppy"
#~ msgstr "Înregistrează pe dischetă"

#~ msgid "Package selection"
#~ msgstr "Selectare pachete"

#~ msgid "Loading from floppy"
#~ msgstr "Încarc de pe dischetă"

#~ msgid "Insert a floppy containing package selection"
#~ msgstr "Introduceţi o dischetă  ce conţine selecţia pachetelor"

#~ msgid "Application:"
#~ msgstr "Aplicaţie:"

#~ msgid "Release: "
#~ msgstr "Ediţia:"

#, fuzzy
#~ msgid "Summary: "
#~ msgstr "Sumar"

#, fuzzy
#~ msgid "Submit kernel version"
#~ msgstr "Versiune kernel"

#, fuzzy
#~ msgid "connecting to %s..."
#~ msgstr "Rulează \"%s\" ..."

#, fuzzy
#~ msgid "Please enter a package name."
#~ msgstr "Va rog înscrieţi numele utilizatorului"

#~ msgid "Loading printer configuration... Please wait"
#~ msgstr "Încarc configuraţia imprimantei... Vă rog aşteptaţi"

#, fuzzy
#~ msgid "The "
#~ msgstr "Teme"

#, fuzzy
#~ msgid "%s (was %s)"
#~ msgstr "%s (Port %s)"

#~ msgid "Root password"
#~ msgstr "Parola de root"

#, fuzzy
#~ msgid "Do you want to recover your system?"
#~ msgstr "Vreţi să folosiţi aboot?"

#, fuzzy
#~ msgid "Samba server"
#~ msgstr "Server SAMBA"

#~ msgid "Move"
#~ msgstr "Mută"

#~ msgid "Which disk do you want to move it to?"
#~ msgstr "Pe ce disc doriţi să mutaţi ?"

#~ msgid "Sector"
#~ msgstr "Sector"

#~ msgid "Which sector do you want to move it to?"
#~ msgstr "La ce sector doriţi să mutaţi?"

#~ msgid "Moving"
#~ msgstr "În mutare"

#~ msgid "Moving partition..."
#~ msgstr "Mut partiţia..."

#~ msgid "Error opening %s for writing: %s"
#~ msgstr "Eroare la citirea  %s pentru a scrie: %s"

#~ msgid ""
#~ "This is HardDrake, a Mandrakelinux hardware configuration tool.\n"
#~ "<span foreground=\"royalblue3\">Version:</span> %s\n"
#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
#~ "tvignaud@mandrakesoft.com&gt;\n"
#~ "\n"
#~ msgstr ""
#~ "Acesta este HardDrake, o unealtă Mandrakelinux de configurare a "
#~ "echipamentelor.\n"
#~ "<span foreground=\"royalblue3\">Versiune:</span> %s\n"
#~ "<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
#~ "tvignaud@mandrakesoft.com&gt;\n"
#~ "\n"

#~ msgid "OK"
#~ msgstr "OK"

#~ msgid ""
#~ "The following options can be set to customize your\n"
#~ "system security. If you need an explanation, look at the help tooltip.\n"
#~ msgstr ""
#~ "Următoarele opţiuni pot fi alese pentru particularizarea\n"
#~ "sistemului dvs. de securitate. Pentru explicaţii, clic pe Ajutor.\n"

#~ msgid "The %s is not known by this version of Scannerdrake."
#~ msgstr "%s nu este cunoscut în această versiune a programului Scannerdrake."

#~ msgid "Czech (QWERTZ)"
#~ msgstr "Ceh (QWERTZ)"

#~ msgid "German"
#~ msgstr "German"

#~ msgid "Dvorak"
#~ msgstr "Dvorak"

#~ msgid "Spanish"
#~ msgstr "Spaniol"

#~ msgid "Finnish"
#~ msgstr "Finlandez"

#~ msgid "French"
#~ msgstr "Francez"

#~ msgid "Norwegian"
#~ msgstr "Norvegian"

#~ msgid "Polish"
#~ msgstr "Polonez"

#~ msgid "Russian"
#~ msgstr "Rus"

#~ msgid "Swedish"
#~ msgstr "Suedez"

#~ msgid "Albanian"
#~ msgstr "Albaneză"

#~ msgid "Armenian (old)"
#~ msgstr "Armeană (vechi)"

#~ msgid "Armenian (typewriter)"
#~ msgstr "Armeană (maşină de scris)"

#~ msgid "Armenian (phonetic)"
#~ msgstr "Armeană (fonetic)"

#~ msgid "Belgian"
#~ msgstr "Belgian"

#~ msgid "Bulgarian (phonetic)"
#~ msgstr "Bulgară (fonetic)"

#~ msgid "Bulgarian (BDS)"
#~ msgstr "Bulgară (BDS)"

#~ msgid "Brazilian (ABNT-2)"
#~ msgstr "Brazilian (ABNT-2)"

#~ msgid "Belarusian"
#~ msgstr "Bielorus"

#~ msgid "Swiss (German layout)"
#~ msgstr "Elveţian (dispunere germanâ)"

#~ msgid "Swiss (French layout)"
#~ msgstr "Elveţian (dispunere francezâ)"

#~ msgid "Czech (QWERTY)"
#~ msgstr "Ceh (QWERTY)"

#~ msgid "German (no dead keys)"
#~ msgstr "German (făra taste moarte)"

#~ msgid "Danish"
#~ msgstr "Daneză"

#~ msgid "Dvorak (US)"
#~ msgstr "Dvorak (US)"

#~ msgid "Dvorak (Norwegian)"
#~ msgstr "Dvorak (Norvegiană)"

#~ msgid "Estonian"
#~ msgstr "Estonian"

#~ msgid "Georgian (\"Russian\" layout)"
#~ msgstr "Georgian (dispunere \"Rusă\")"

#~ msgid "Georgian (\"Latin\" layout)"
#~ msgstr "Georgian (dispunere \"Latină\")"

#~ msgid "Greek"
#~ msgstr "Grec"

#~ msgid "Hungarian"
#~ msgstr "Ungar"

#~ msgid "Croatian"
#~ msgstr "Croată"

#~ msgid "Israeli"
#~ msgstr "Izraeliană"

#~ msgid "Israeli (Phonetic)"
#~ msgstr "Izraeliană (fonetic)"

#~ msgid "Iranian"
#~ msgstr "Iraniană"

#~ msgid "Icelandic"
#~ msgstr "Islandeză"

#~ msgid "Italian"
#~ msgstr "Italiană"

#~ msgid "Kannada"
#~ msgstr "Kannada"

#~ msgid "Latin American"
#~ msgstr "Latin American"

#~ msgid "Lithuanian AZERTY (old)"
#~ msgstr "Lituanian AZERTY (vechi)"

#~ msgid "Lithuanian AZERTY (new)"
#~ msgstr "Lituanian AZERTY (nou)"

#~ msgid "Lithuanian \"number row\" QWERTY"
#~ msgstr "Lituanian QWERTY"

#~ msgid "Lithuanian \"phonetic\" QWERTY"
#~ msgstr "Lithuanian \"fonetic\" QWERTY"

#~ msgid "Latvian"
#~ msgstr "Letonă"

#~ msgid "Macedonian"
#~ msgstr "Macedoneană"

#~ msgid "Dutch"
#~ msgstr "Olandeză"

#~ msgid "Polish (qwerty layout)"
#~ msgstr "Poloneză (dispunere qwerty)"

#~ msgid "Polish (qwertz layout)"
#~ msgstr "Poloneză (dispunere qwertz)"

#~ msgid "Portuguese"
#~ msgstr "Portugheză"

#~ msgid "Canadian (Quebec)"
#~ msgstr "Canadiană (Quebec)"

#~ msgid "Romanian (qwertz)"
#~ msgstr "Românească (qwertz)"

#~ msgid "Romanian (qwerty)"
#~ msgstr "Românească (qwerty)"

#~ msgid "Russian (Phonetic)"
#~ msgstr "Rusească (fonetic)"

#~ msgid "Saami (norwegian)"
#~ msgstr "Saami (norvegiană)"

#~ msgid "Slovenian"
#~ msgstr "Slovenă"

#~ msgid "Slovakian (QWERTZ)"
#~ msgstr "Slovacă (QWERTZ)"

#~ msgid "Slovakian (QWERTY)"
#~ msgstr "Slovacă (QWERTY)"

#~ msgid "Serbian (cyrillic)"
#~ msgstr "Sârbă (dispunere chirilică)"

#~ msgid "Syriac"
#~ msgstr "Siriană"

#~ msgid "Syriac (phonetic)"
#~ msgstr "Siriană (fonetic)"

#~ msgid "Telugu"
#~ msgstr "Telugu"

#~ msgid "Tamil (ISCII-layout)"
#~ msgstr "Tamilă (TSCII)"

#~ msgid "Tamil (Typewriter-layout)"
#~ msgstr "Tamil (maşină de scris)"

#~ msgid "Thai keyboard"
#~ msgstr "Tastatură Thai"

#~ msgid "Tajik keyboard"
#~ msgstr "Tastatură Tadjică"

#~ msgid "Turkish (traditional \"F\" model)"
#~ msgstr "Turcă (model tradiţional \"F\")"

#~ msgid "Turkish (modern \"Q\" model)"
#~ msgstr "Turcă (model \"Q\" modern)"

#~ msgid "Ukrainian"
#~ msgstr "Ucrainiană"

#~ msgid "Uzbek (cyrillic)"
#~ msgstr "Uzbekă (chirilică)"

#~ msgid "Yugoslavian (latin)"
#~ msgstr "Iugoslavă (latină)"

#~ msgid "No devices found"
#~ msgstr "Nu am găsit nici un dispozitiv"

#~ msgid "Enable multiple profiles"
#~ msgstr "Activează profilurile multiple"

#~ msgid "Installing bootloader"
#~ msgstr "Instalare gestionar de demaraj"

#~ msgid ""
#~ "You may now provide options to module %s.\n"
#~ "Options are in format ``name=value name2=value2...''.\n"
#~ "For instance, ``io=0x300 irq=7''"
#~ msgstr ""
#~ "Puteţi furniza acum opţiunile modulului %s.\n"
#~ "Opţiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n"
#~ "de exemplu, ``io=0x300 irq=7''"

#~ msgid "Configuring printer..."
#~ msgstr "Configurez imprimanta ..."

#~ msgid "Configuring applications..."
#~ msgstr "Configurez aplicaţiile..."

#~ msgid "Installation of %s failed. The following error occurred:"
#~ msgstr "Instalarea lui %s a eşuat. Următoarea eroare a apărut:"

#~ msgid "Set of tools to read and send mail and news and to browse the Web"
#~ msgstr ""
#~ "Set de unelte pentru citire şi trimitere poştă şi ştiri şi pentru "
#~ "navigare pe Web"

#~ msgid "Use auto detection"
#~ msgstr "Foloseşte autodetecţia"

#~ msgid "GRUB"
#~ msgstr "GRUB"

#~ msgid "/dev/hda"
#~ msgstr "/dev/hda"

#~ msgid "/dev/hdb"
#~ msgstr "/dev/hdb"

#~ msgid "/dev/fd0"
#~ msgstr "/dev/fd0"

#~ msgid "Delay before booting the default image"
#~ msgstr "Timp de aşteptare înaintea demarării imaginii implicite"

#~ msgid ""
#~ "After you have configured the general bootloader parameters, the list of\n"
#~ "boot options that will be available at boot time will be displayed.\n"
#~ "\n"
#~ "If there are other operating systems installed on your machine they will\n"
#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
#~ "options by clicking \"%s\" to create a new entry; selecting an entry and\n"
#~ "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
#~ "changes.\n"
#~ "\n"
#~ "You may also not want to give access to these other operating systems to\n"
#~ "anyone who goes to the console and reboots the machine. You can delete "
#~ "the\n"
#~ "corresponding entries for the operating systems to remove them from the\n"
#~ "bootloader menu, but you will need a boot disk in order to boot those "
#~ "other\n"
#~ "operating systems!"
#~ msgstr ""
#~ "După ce aţi configurat parametrii generali pt. gestionarul de demarare,\n"
#~ "va fi afişată lista opţiunilor ce va fi disponibilă la momentul "
#~ "demarării.\n"
#~ "\n"
#~ "Dacă există alte sisteme de operare instalate pe maşină, vor fi\n"
#~ "adăugate automat la meniul de demarare. Puteţi ajusta opţiunile\n"
#~ "existente apăsând pe \"%s\" pentru a crea o nouă intrare; selectând\n"
#~ "o intrare şi făcând clic pe \"%s\" sau \"%s\" pentru a o modifica sau a "
#~ "o\n"
#~ "\"elimina. \"%s\" validează schimbările.\n"
#~ "\n"
#~ "Puteţi de asemenea să interziceţi accesul la aceste sisteme de operare\n"
#~ "oricui merge la consolă şi reporneşte maşina. Puteţi şterge intrările\n"
#~ "corespunzătoare acestor sisteme din meniul de demarare, dar veţi avea\n"
#~ "nevoie de o dischetă de demarare pentru a putea să le porniţi apoi!"

#~ msgid ""
#~ "No ethernet network adapter has been detected on your system.\n"
#~ "I cannot set up this connection type."
#~ msgstr ""
#~ "Nu a fost detectat nici un adaptor de reţea ethernet pe sistemul "
#~ "dumneavoastră.\n"
#~ "Nu pot configura acest tip de conexiune."

#~ msgid ""
#~ "Please choose which network adapter you want to use to connect to "
#~ "Internet."
#~ msgstr ""
#~ "Vă rog alegeţi ce adaptor de reţea doriţi să folosiţi pentru a vă conecta "
#~ "la Internet."

#~ msgid "chunk size"
#~ msgstr "mărimea porţiunii "

#~ msgid "mkraid failed (maybe raidtools are missing?)"
#~ msgstr "mkraid a eşuat (poate vă lipsesc raidtools?)"

#~ msgid "mkraid failed"
#~ msgstr "mkraid a eşuat"

#~ msgid "Mandrake Online"
#~ msgstr "Mandrake Online"

#~ msgid ""
#~ "Connection failed.\n"
#~ "Verify your configuration in the Mandrake Control Center."
#~ msgstr ""
#~ "Conectare eşuată.\n"
#~ "Verificaţi configurarea în Centrul de control Mandrake."

#~ msgid "The package %s is needed. Install it?"
#~ msgstr "Pachetul %s este necesar. Doriţi instalarea lui?"

#~ msgid "ignore"
#~ msgstr "ignoră"

#~ msgid "no"
#~ msgstr "nu"

#~ msgid "yes"
#~ msgstr "da"

#~ msgid "SILO Installation"
#~ msgstr "Instalare SILO"

#~ msgid "First sector of boot partition"
#~ msgstr "Primul sector al partiţiei de demaraj"

#~ msgid "Bootloader installation"
#~ msgstr "Instalarea gestionarului de demarare"

#~ msgid "SILO"
#~ msgstr "SILO"

#~ msgid "Harddrake2 version %s"
#~ msgstr "HardDrake 2 versiunea %s"

#~ msgid "transmitted"
#~ msgstr "transmis"

#~ msgid "received"
#~ msgstr "recepţionat"

#~ msgid ""
#~ "You can export using NFS or SMB. Please select which you'd like to use."
#~ msgstr ""
#~ "Puteţi exporta fişiere folosind sistemul NFS sau SMB. Pe care îl alegeţi?"

#~ msgid ""
#~ "You can export using NFS or Samba. Please select which you'd like to use."
#~ msgstr ""
#~ "Puteţi exporta fişiere folosind sistemul NFS sau Samba. Pe care îl "
#~ "alegeţi?"

#~ msgid "Can not open %s!"
#~ msgstr "Nu pot deschide %s!"

#~ msgid ""
#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
#~ "s.\n"
#~ "Your card is supported by Xorg %s which may have a better support in 2D."
#~ msgstr ""
#~ "Placa dvs. poate avea accelerare 3D hardware, dar numai cu Xorg %s.\n"
#~ "Placa dvs. este utilizabilă cu Xorg %s ce are un suport mai bun în 2D."

#~ msgid ""
#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
#~ "s,\n"
#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
#~ "Your card is supported by Xorg %s which may have a better support in 2D."
#~ msgstr ""
#~ "Placa dvs. poate avea accelerare 3D hardware, dar numai cu Xorg %s,\n"
#~ "ACEST SUPORT ESTE EXPERIMENTAL ŞI POATE BLOCA SISTEMUL DVS!Placa dvs. "
#~ "este utilizabilă cu Xorg %s ce are un suport mai bun în 2D."

#~ msgid "Xpmac (installation display driver)"
#~ msgstr "Xpmac (driver de instalare ecran)"

#~ msgid "4 billion colors (32 bits)"
#~ msgstr "4 miliarde de culori (32 biţi)"

#~ msgid "XFree86 server: %s\n"
#~ msgstr "Server XFree86: %s\n"

#~ msgid "Here is the full list of keyboards available"
#~ msgstr "Aici este lista tuturor tastaturilor disponibile"

#~ msgid "Please insert the Boot floppy used in drive %s"
#~ msgstr ""
#~ "Introduceţi discheta de pornire (de Boot) folosită în perifericul %s"

#~ msgid "XawTV is not installed!"
#~ msgstr "XawTV nu este instalat!"

#~ msgid "Provider dns 1 (optional)"
#~ msgstr "DNS 1 furnizor (opţional)"

#~ msgid "Provider dns 2 (optional)"
#~ msgstr "DNS 2 furnizor (opţional)"

#~ msgid "DHCP Client"
#~ msgstr "Client DHCP"

#~ msgid ""
#~ "Change\n"
#~ "Restore Path"
#~ msgstr ""
#~ "Schimbă calea\n"
#~ "de restaurare"

#~ msgid "European protocol"
#~ msgstr "Protocol European"

#~ msgid "Do you want to start a new configuration ?"
#~ msgstr "Doriţi să începeţi o nouă configuraţie ?"

#~ msgid "DrakTermServ"
#~ msgstr "DrakTermServ"

#~ msgid "Windows (FAT32)"
#~ msgstr "Windows (FAT32)"

#~ msgid "Scientific Workstation"
#~ msgstr "Staţie de lucru ştiinţifică"

#~ msgid "Scientific applications such as gnuplot"
#~ msgstr "Aplicţii ştiinţifice precum gnuplot"

#~ msgid "Can not create log file!"
#~ msgstr "Nu pot crea fişierul raport!"

#~ msgid "Gnome Workstation"
#~ msgstr "Staţie de lucru Gnome"

#~ msgid "Running \"%s\" ..."
#~ msgstr "Rulează \"%s\" ..."

#~ msgid "On Hard Drive"
#~ msgstr "pe disc fix"

#~ msgid "Messages"
#~ msgstr "Mesaje"

#~ msgid "Syslog"
#~ msgstr "Jurnal de sistem"

#~ msgid "Compact"
#~ msgstr "Compact"