# DRAKBOOTDISK PT_BR PO FILE # Copyright (C) YEAR Free Software Foundation, Inc. # ANDREI BOSCO BEZERRA TORRES , 2000. # Bruno Dorfman Buys , 2002 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2002-09-20 11:43+0200\n" "PO-Revision-Date: 2002-02-14 00:06GMT\n" "Last-Translator: Bruno Dorfman Buys \n" "Language-Team: Português \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-1\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.5\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kB" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kB" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB ou mais" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "Escolha um servidor X" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "Servidor X" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "Configuração multi-cabeça" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "Seu sistema suporta configuração de cabeça múltipla.\n" "O que você quer fazer?" #: ../../Xconfig/card.pm_.c:286 msgid "Select the memory size of your graphics card" msgstr "Selecione o tamanho da memória de sua placa gráfica" #: ../../Xconfig/card.pm_.c:347 msgid "XFree configuration" msgstr "Configuração do XFree" #: ../../Xconfig/card.pm_.c:349 msgid "Which configuration of XFree do you want to have?" msgstr "Qual configuração do XFree você quer ter?" #: ../../Xconfig/card.pm_.c:381 msgid "Configure all heads independently" msgstr "Configurar todas as cabeças independentemente" #: ../../Xconfig/card.pm_.c:382 msgid "Use Xinerama extension" msgstr "Usar extensão Xinerama" #: ../../Xconfig/card.pm_.c:387 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Configurar apenas placa \"%s\" (%s)" #: ../../Xconfig/card.pm_.c:399 ../../Xconfig/card.pm_.c:400 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:411 ../../Xconfig/card.pm_.c:437 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s com aceleração hardware 3D" #: ../../Xconfig/card.pm_.c:414 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s.\n" "Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D." #: ../../Xconfig/card.pm_.c:416 ../../Xconfig/card.pm_.c:439 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Sua placa suporta aceleração hardware 3D com o XFree %s." #: ../../Xconfig/card.pm_.c:424 ../../Xconfig/card.pm_.c:445 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s com aceleração hardware 3D EXPERIMENTAL" #: ../../Xconfig/card.pm_.c:427 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s,\n" "NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR.\n" "Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D." #: ../../Xconfig/card.pm_.c:430 ../../Xconfig/card.pm_.c:447 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Seu placa suporta aceleração hardware 3D com o XFree %s,\n" "NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR." #: ../../Xconfig/card.pm_.c:453 msgid "Xpmac (installation display driver)" msgstr "Xpmac (installation display driver)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:978 msgid "Custom" msgstr "Personalizada" #: ../../Xconfig/main.pm_.c:102 #, fuzzy msgid "Graphic Card" msgstr "Placa Gráfica" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "Monitor" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:209 msgid "Resolution" msgstr "Resolução" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:385 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Opções" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:268 #: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:275 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:166 #: ../../standalone/drakbackup_.c:3974 ../../standalone/drakbackup_.c:4069 #: ../../standalone/drakbackup_.c:4088 msgid "Ok" msgstr "Ok" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../harddrake/ui.pm_.c:96 ../../printerdrake.pm_.c:3207 #: ../../standalone/draksplash_.c:122 ../../standalone/logdrake_.c:225 msgid "Quit" msgstr "Sair" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Manter alterações?\n" "A configuração atual é:\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "Escolha um monitor" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "Genérico" #: ../../Xconfig/monitor.pm_.c:99 ../../harddrake/ui.pm_.c:37 #, fuzzy msgid "Vendor" msgstr "Desfazer" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "" #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Dois parâmetros críticos são a taxa de atualização vertical, que é a taxa\n" "em que toda a tela é atualizada, e principalmente a taxa de sincronização\n" "horizontal, que é a taxa em que scanlines são mostradas.\n" "\n" "É MUITO IMPORTANTE que você não especifique um tipo de monitor com taxa de " "atualizaçã\n" "que é muito além das capacidades do seu monitor: você pode danificar seu " "monitor.\n" " Se tiver dúvida, escolha características conservadoras." #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "Taxa de atualização horizontal" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "Taxa de atualização vertical" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 cores (8 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32 mil cores (15 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65 mil cores (16 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 milhões de cores (24 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 bilhões de cores (32 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:129 msgid "Resolutions" msgstr "Resoluções" #: ../../Xconfig/resolution_and_depth.pm_.c:254 msgid "Choose the resolution and the color depth" msgstr "Escolha a resolução e número de cores" #: ../../Xconfig/resolution_and_depth.pm_.c:255 #, c-format msgid "Graphics card: %s" msgstr "Placa Gráfica: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1019 #: ../../bootlook.pm_.c:344 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:354 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:195 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:42 ../../printerdrake.pm_.c:2169 #: ../../security/main.pm_.c:216 ../../standalone/drakautoinst_.c:203 #: ../../standalone/drakbackup_.c:3928 ../../standalone/drakbackup_.c:3961 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4014 #: ../../standalone/drakbackup_.c:4041 ../../standalone/drakbackup_.c:4101 #: ../../standalone/drakbackup_.c:4128 ../../standalone/drakbackup_.c:4158 #: ../../standalone/drakbackup_.c:4184 ../../standalone/drakconnect_.c:115 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 #: ../../standalone/drakfloppy_.c:235 ../../standalone/drakfont_.c:970 #: ../../standalone/drakgw_.c:560 ../../standalone/logdrake_.c:225 #: ../../ugtk.pm_.c:296 msgid "Cancel" msgstr "Cancelar" #: ../../Xconfig/test.pm_.c:30 msgid "Test of the configuration" msgstr "Testar configuração" #: ../../Xconfig/test.pm_.c:31 msgid "Do you want to test the configuration?" msgstr "Você quer testar a configuração?" #: ../../Xconfig/test.pm_.c:31 #, fuzzy msgid "Warning: testing this graphic card may freeze your computer" msgstr "Atenção: testar essa placa gráfica pode travar o seu computador" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Estilo do teclado: %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "Tipo do Mouse: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "Dispositivo do mouse: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Sincronização Horizontal do Monitor: %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Atualização Vertical do Monitor: %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "Placa Gráfica: %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Memória gráfica: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "Número de cores: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "Resolução: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "Server XFree86: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "Driver XFree86: %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "X ao iniciar" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Eu posso fazer seu computador automaticamento iniciar no X após a\n" "a inicialização. Você gostaria de iniciar o X quando reiniciar?" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm_.c:85 #, fuzzy msgid "What norm is your TV using?" msgstr "De que tipo é sua conexão ISDN?" #: ../../any.pm_.c:108 ../../any.pm_.c:133 msgid "First sector of boot partition" msgstr "Primeiro setor da partição de boot" #: ../../any.pm_.c:108 ../../any.pm_.c:133 ../../any.pm_.c:210 msgid "First sector of drive (MBR)" msgstr "Primeiro setor do drive (MBR)" #: ../../any.pm_.c:112 msgid "SILO Installation" msgstr "Instalação do SILO" #: ../../any.pm_.c:113 ../../any.pm_.c:126 msgid "Where do you want to install the bootloader?" msgstr "Onde você quer instalar o gerenciador de inicialização?" #: ../../any.pm_.c:125 msgid "LILO/grub Installation" msgstr "Instalação do LILO/grub" #: ../../any.pm_.c:137 ../../any.pm_.c:151 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:139 msgid "LILO with text menu" msgstr "LILO com menu de texto" #: ../../any.pm_.c:140 ../../any.pm_.c:151 msgid "LILO with graphical menu" msgstr "LILO com menu gráfico" #: ../../any.pm_.c:143 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:147 msgid "Boot from DOS/Windows (loadlin)" msgstr "Inicialização pelo DOS/Windows (loadlin)" #: ../../any.pm_.c:149 ../../any.pm_.c:151 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader main options" msgstr "Principais opções do gerenciador de inicialização" #: ../../any.pm_.c:160 ../../any.pm_.c:191 msgid "Bootloader to use" msgstr "Gerenciador de inicialização a ser usado" #: ../../any.pm_.c:162 msgid "Bootloader installation" msgstr "Instalação do gerenciador de inicialização" #: ../../any.pm_.c:164 ../../any.pm_.c:193 msgid "Boot device" msgstr "Dispositivo de boot" #: ../../any.pm_.c:165 msgid "Compact" msgstr "Compacto" #: ../../any.pm_.c:165 msgid "compact" msgstr "Compacto" #: ../../any.pm_.c:166 ../../any.pm_.c:291 msgid "Video mode" msgstr "Modo de Vídeo" #: ../../any.pm_.c:168 msgid "Delay before booting default image" msgstr "Tempo antes de entrar na imagem padrão" #: ../../any.pm_.c:170 ../../any.pm_.c:789 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1097 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:865 ../../printerdrake.pm_.c:980 #: ../../standalone/drakbackup_.c:3530 ../../standalone/drakconnect_.c:624 #: ../../standalone/drakconnect_.c:649 msgid "Password" msgstr "Senha" #: ../../any.pm_.c:171 ../../any.pm_.c:790 #: ../../install_steps_interactive.pm_.c:1098 msgid "Password (again)" msgstr "Senha (de novo)" #: ../../any.pm_.c:172 msgid "Restrict command line options" msgstr "Restringir opções da linha de comando" #: ../../any.pm_.c:172 msgid "restrict" msgstr "restrito" #: ../../any.pm_.c:174 msgid "Clean /tmp at each boot" msgstr "Limpar /tmp a cada inicialização" #: ../../any.pm_.c:175 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Especifique o tamanho da RAM se necessário (%d MB encontrados)" #: ../../any.pm_.c:177 msgid "Enable multi profiles" msgstr "Permitir vários perfis" #: ../../any.pm_.c:181 msgid "Give the ram size in MB" msgstr "Dar o tamanha da RAM em Mb" #: ../../any.pm_.c:183 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha" #: ../../any.pm_.c:184 ../../any.pm_.c:765 #: ../../diskdrake/interactive.pm_.c:1195 #: ../../install_steps_interactive.pm_.c:1092 msgid "Please try again" msgstr "Favor tentar novamente" #: ../../any.pm_.c:184 ../../any.pm_.c:765 #: ../../install_steps_interactive.pm_.c:1092 msgid "The passwords do not match" msgstr "As senhas não conferem" #: ../../any.pm_.c:192 msgid "Init Message" msgstr "Mensagem Inicial" #: ../../any.pm_.c:194 msgid "Open Firmware Delay" msgstr "Delay do firmware aberto" #: ../../any.pm_.c:195 msgid "Kernel Boot Timeout" msgstr "Tempo de espera do boot do kernel" #: ../../any.pm_.c:196 msgid "Enable CD Boot?" msgstr "Permitir CD Boot?" #: ../../any.pm_.c:197 msgid "Enable OF Boot?" msgstr "Permitir OF Boot?" #: ../../any.pm_.c:198 msgid "Default OS?" msgstr "SO padrão?" #: ../../any.pm_.c:232 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm_.c:248 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "Aqui estão as entradas diferentes.\n" "Você pode adicionar mais ou modificar as existentes." #: ../../any.pm_.c:258 ../../standalone/drakbackup_.c:1560 #: ../../standalone/drakbackup_.c:1673 ../../standalone/drakfont_.c:1011 #: ../../standalone/drakfont_.c:1054 msgid "Add" msgstr "Adicionar" #: ../../any.pm_.c:258 ../../any.pm_.c:777 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printerdrake.pm_.c:3207 ../../standalone/drakbackup_.c:2774 msgid "Done" msgstr "Pronto" #: ../../any.pm_.c:258 msgid "Modify" msgstr "Modificar" #: ../../any.pm_.c:266 msgid "Which type of entry do you want to add?" msgstr "Qual tipo de entrada você quer adicionar" #: ../../any.pm_.c:267 ../../standalone/drakbackup_.c:1707 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:267 msgid "Other OS (SunOS...)" msgstr "Outros SO (SunOS...)" #: ../../any.pm_.c:268 msgid "Other OS (MacOS...)" msgstr "Outros SO (MacOS...)" #: ../../any.pm_.c:268 msgid "Other OS (windows...)" msgstr "Outros SO (windows...)" #: ../../any.pm_.c:287 msgid "Image" msgstr "Image" #: ../../any.pm_.c:288 ../../any.pm_.c:299 msgid "Root" msgstr "Root" #: ../../any.pm_.c:289 ../../any.pm_.c:317 msgid "Append" msgstr "Append" #: ../../any.pm_.c:293 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:294 msgid "Read-write" msgstr "Read-write" #: ../../any.pm_.c:301 msgid "Table" msgstr "Table" #: ../../any.pm_.c:302 msgid "Unsafe" msgstr "Unsafe" #: ../../any.pm_.c:309 ../../any.pm_.c:314 ../../any.pm_.c:316 msgid "Label" msgstr "Rótulo" #: ../../any.pm_.c:311 ../../any.pm_.c:321 ../../harddrake/v4l.pm_.c:200 msgid "Default" msgstr "Default" #: ../../any.pm_.c:318 msgid "Initrd-size" msgstr "Tamanho do Initrd" #: ../../any.pm_.c:320 msgid "NoVideo" msgstr "Sem vídeo" #: ../../any.pm_.c:328 msgid "Remove entry" msgstr "Remover entrada" #: ../../any.pm_.c:331 msgid "Empty label not allowed" msgstr "Não é permitido rótulo vazio" #: ../../any.pm_.c:332 msgid "You must specify a kernel image" msgstr "Você deve especificar uma imagem de kernel" #: ../../any.pm_.c:332 msgid "You must specify a root partition" msgstr "Você deve especificar uma partição root" #: ../../any.pm_.c:333 msgid "This label is already used" msgstr "Esse rótulo já está sendo utilizado" #: ../../any.pm_.c:657 #, c-format msgid "Found %s %s interfaces" msgstr "Interfaces %s %s encontradas" #: ../../any.pm_.c:658 msgid "Do you have another one?" msgstr "Você tem alguma outra?" #: ../../any.pm_.c:659 #, c-format msgid "Do you have any %s interfaces?" msgstr "Você tem alguma interface %s?" #: ../../any.pm_.c:661 ../../any.pm_.c:824 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 msgid "No" msgstr "Não" #: ../../any.pm_.c:661 ../../any.pm_.c:823 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 msgid "Yes" msgstr "Sim" #: ../../any.pm_.c:662 msgid "See hardware info" msgstr "Ver informação do hardware" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:678 #, c-format msgid "Installing driver for %s card %s" msgstr "Instalando driver para placa %s %s" #: ../../any.pm_.c:679 #, c-format msgid "(module %s)" msgstr "(módulo %s)" #: ../../any.pm_.c:690 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../any.pm_.c:696 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Agora você pode prover as opções para o módulo %s.\n" "As opções estão no formato ``nome=valor nome2=valor2 ...''\n" "Para instância, ``io=0x300 irq=7''" #: ../../any.pm_.c:698 msgid "Module options:" msgstr "Opções do módulo:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:710 #, c-format msgid "Which %s driver should I try?" msgstr "Qual driver %s eu deveria tentar?" #: ../../any.pm_.c:719 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Em alguns casos, o driver %s precisa de informações extra para funcionar\n" "corretamente, mas ele normalmente funciona bem sem essas informações. Você\n" "gostaria de especificar opções extras ou deixar o driver localizar na sua\n" "máquina as informações que ele precisa? Ocasionalmente, isso poderá travar\n" "o computador, mas não deve causar nenhum dano." #: ../../any.pm_.c:723 msgid "Autoprobe" msgstr "Auto detectar" #: ../../any.pm_.c:723 msgid "Specify options" msgstr "Especificar opções" #: ../../any.pm_.c:735 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Falha carregando módulo %s.\n" "Você quer tentar novamente com outros parâmentros?" #: ../../any.pm_.c:751 msgid "access to X programs" msgstr "Acesso a programas X" #: ../../any.pm_.c:752 msgid "access to rpm tools" msgstr "Acesso a ferramentas rpm" #: ../../any.pm_.c:753 msgid "allow \"su\"" msgstr "Permitir \"su\"" #: ../../any.pm_.c:754 msgid "access to administrative files" msgstr "Acesso a arquivos administrativos" #: ../../any.pm_.c:755 #, fuzzy msgid "access to network tools" msgstr "Acesso a ferramentas rpm" #: ../../any.pm_.c:756 #, fuzzy msgid "access to compilation tools" msgstr "Acesso a ferramentas rpm" #: ../../any.pm_.c:761 #, c-format msgid "(already added %s)" msgstr "(já adicionado %s)" #: ../../any.pm_.c:766 msgid "This password is too simple" msgstr "Essa senha é muito simples" #: ../../any.pm_.c:767 msgid "Please give a user name" msgstr "Favor dar um nome de usuário" #: ../../any.pm_.c:768 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "O nome do usuário deve conter apenas letras minúsculas, números `-' e `_'" #: ../../any.pm_.c:769 #, fuzzy msgid "The user name is too long" msgstr "Esse usuário já foi adicionado" #: ../../any.pm_.c:770 msgid "This user name is already added" msgstr "Esse usuário já foi adicionado" #: ../../any.pm_.c:774 msgid "Add user" msgstr "Adicionar usuário" #: ../../any.pm_.c:775 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Entre com o usuário\n" "%s" #: ../../any.pm_.c:776 msgid "Accept user" msgstr "Aceitar usuário" #: ../../any.pm_.c:787 msgid "Real name" msgstr "Nome real" #: ../../any.pm_.c:788 ../../printerdrake.pm_.c:864 #: ../../printerdrake.pm_.c:979 msgid "User name" msgstr "Nome do usuário" #: ../../any.pm_.c:791 msgid "Shell" msgstr "Shell" #: ../../any.pm_.c:793 msgid "Icon" msgstr "Ícone" #: ../../any.pm_.c:820 msgid "Autologin" msgstr "Autologin" #: ../../any.pm_.c:821 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "Eu posso configurar o seu computador para automaticamente logar um usuário.\n" "Se você não quiser utilisar esta função, clique em \"Cancelar\"." #: ../../any.pm_.c:825 msgid "Choose the default user:" msgstr "Escolha o usuário:" #: ../../any.pm_.c:826 msgid "Choose the window manager to run:" msgstr "Escolha o gerenciador de janelas para ele:" #: ../../any.pm_.c:841 msgid "Please choose a language to use." msgstr "Favor escolher o idioma a ser utilizado." #: ../../any.pm_.c:843 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Você pode escolher outros idiomas que estarão disponíveis após a instalação" #: ../../any.pm_.c:857 ../../install_steps_interactive.pm_.c:690 #: ../../standalone/drakxtv_.c:73 msgid "All" msgstr "Tudo" #: ../../any.pm_.c:978 msgid "Allow all users" msgstr "Permite todos os usuários" #: ../../any.pm_.c:978 msgid "No sharing" msgstr "Sem compartilhamento" #: ../../any.pm_.c:988 ../../install_any.pm_.c:1199 ../../standalone.pm_.c:66 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "O pacote %s precisa ser instalado. Você deseja instalá-lo?" #: ../../any.pm_.c:991 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "Você pode exportar usando SAMBA ou NFS. Qual deles você quer" #: ../../any.pm_.c:999 ../../install_any.pm_.c:1204 ../../standalone.pm_.c:71 #, c-format msgid "Mandatory package %s is missing" msgstr "Pacote obrigatório %s faltando" #: ../../any.pm_.c:1005 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm_.c:1019 msgid "Launch userdrake" msgstr "Carregar Userdrake" #: ../../any.pm_.c:1021 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "O compartilhamento por usuário usa o grupo \"fileshare\".\n" "Você pode usar o userdrake para adicionar um usuário neste grupo." #: ../../any.pm_.c:1072 msgid "Welcome To Crackers" msgstr "Bem-vindo à Crackers" #: ../../any.pm_.c:1073 msgid "Poor" msgstr "Pobre" #: ../../any.pm_.c:1074 ../../mouse.pm_.c:31 msgid "Standard" msgstr "Padrão" #: ../../any.pm_.c:1075 msgid "High" msgstr "Alto" #: ../../any.pm_.c:1076 #, fuzzy msgid "Higher" msgstr "Alto" #: ../../any.pm_.c:1077 msgid "Paranoid" msgstr "Paranóico" #: ../../any.pm_.c:1080 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Esse nível deve ser usado com cuidado. Ele faz o seu sistema mais fácil de " "usar,\n" "mas muito sensível: ele não deve ser usado em uma máquina conectada a " "outros\n" "ou à internet. Não existe acesso por senha." #: ../../any.pm_.c:1083 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "As senhas agora estão ativadas, mas o uso como computador de rede ainda não " "é recomendado." #: ../../any.pm_.c:1084 #, fuzzy msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Esse é a segurança padrão recomendada para um computador que será usado\n" "para se conectar à Internet como um cliente. Agora existe checagens de " "segurança. " #: ../../any.pm_.c:1085 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../any.pm_.c:1086 #, fuzzy msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Com esse nível de segurança, o uso desse sistema como um servidor se tornou " "possível.\n" "A segurança agora está alta o suficiente para usar o sistema como um " "servidor\n" "que aceita conexão de muitos clientes. " #: ../../any.pm_.c:1089 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Baseado no nível anterior, mas agora o sistema está totalmente fechado.\n" "As características de segurança estão no máximo." #: ../../any.pm_.c:1095 #, fuzzy msgid "DrakSec Basic Options" msgstr "Opções" #: ../../any.pm_.c:1096 #, fuzzy msgid "Please choose the desired security level" msgstr "Escolha nível de segurança" #: ../../any.pm_.c:1099 msgid "Security level" msgstr "Nível de segurança" #: ../../any.pm_.c:1101 msgid "Use libsafe for servers" msgstr "Use lbsafe para servidores" #: ../../any.pm_.c:1102 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Uma livraria que defende contra ataques de buffer overflow e strings de " "format" #: ../../any.pm_.c:1103 msgid "Security Administrator (login or email)" msgstr "" #: ../../any.pm_.c:1192 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:429 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Bem-vindo ao %s, o selecionador de sistema operacional!\n" "\n" "Escolha um sistema operacional da lista acima ou\n" "aguarde %d segundos para entrar no sistema padrao.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Welcome to GRUB the operating system chooser!" msgstr "Bem-vindo ao GRUB o selecionador de sistema operacional!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use as teclas %c e %c para selecionar a entrada que quiser." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Pressione entrar para entrar no SO selecionado, 'e' para editar os" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:998 msgid "commands before booting, or 'c' for a command-line." msgstr "comandos antes da inicializacao, ou 'c' para linha de comando." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:1001 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" "A inicializacao da entrada selecionada ocorrera automaticamente em %d " "segundos." #: ../../bootloader.pm_.c:1005 msgid "not enough room in /boot" msgstr "sem espaco suficiente em /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1105 msgid "Desktop" msgstr "Desktop" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1107 msgid "Start Menu" msgstr "Menu Iniciar" #: ../../bootloader.pm_.c:1126 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Você não pode instalar o carregador de boot em uma %s partição\n" #: ../../bootlook.pm_.c:46 ../../standalone/drakperm_.c:15 #: ../../standalone/draksplash_.c:26 msgid "no help implemented yet.\n" msgstr "ajuda ainda não implementada.\n" #: ../../bootlook.pm_.c:62 msgid "Boot Style Configuration" msgstr "Configuração do estilo de inicialização" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:62 #: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:82 #: ../../standalone/logdrake_.c:102 msgid "/_File" msgstr "/_Arquivo" #: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83 #: ../../standalone/logdrake_.c:108 msgid "/File/_Quit" msgstr "/Arquivo/Sai_r" #: ../../bootlook.pm_.c:80 ../../harddrake/ui.pm_.c:63 #: ../../standalone/drakfloppy_.c:83 ../../standalone/logdrake_.c:108 msgid "Q" msgstr "R" #: ../../bootlook.pm_.c:91 msgid "NewStyle Categorizing Monitor" msgstr "Categorizamento NewStyle de Monitor" #: ../../bootlook.pm_.c:92 msgid "NewStyle Monitor" msgstr "Monitor NewStyle" #: ../../bootlook.pm_.c:93 msgid "Traditional Monitor" msgstr "Monitor Tradicional" #: ../../bootlook.pm_.c:94 msgid "Traditional Gtk+ Monitor" msgstr "Monitor Gtk+ Tradicional" #: ../../bootlook.pm_.c:95 msgid "Launch Aurora at boot time" msgstr "Executar Aurora na inicialização" #: ../../bootlook.pm_.c:98 msgid "Lilo/grub mode" msgstr "Modo lilo/grub" #: ../../bootlook.pm_.c:98 msgid "Yaboot mode" msgstr "Modo yaboot" #: ../../bootlook.pm_.c:146 #, fuzzy msgid "Install themes" msgstr "Instalar sistema" #: ../../bootlook.pm_.c:147 msgid "" "Display theme\n" "under console" msgstr "" #: ../../bootlook.pm_.c:148 #, fuzzy msgid "Create new theme" msgstr "Criar uma nova partição" #: ../../bootlook.pm_.c:192 #, c-format msgid "Backup %s to %s.old" msgstr "" #: ../../bootlook.pm_.c:195 #, fuzzy, c-format msgid "Copy %s to %s" msgstr "Copiando %s" #: ../../bootlook.pm_.c:200 ../../bootlook.pm_.c:230 ../../bootlook.pm_.c:232 #: ../../bootlook.pm_.c:242 ../../bootlook.pm_.c:251 ../../bootlook.pm_.c:258 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:116 #: ../../diskdrake/interactive.pm_.c:213 ../../diskdrake/interactive.pm_.c:344 #: ../../diskdrake/interactive.pm_.c:359 ../../diskdrake/interactive.pm_.c:473 #: ../../diskdrake/interactive.pm_.c:478 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:34 msgid "Error" msgstr "Erro" #: ../../bootlook.pm_.c:200 msgid "Lilo message not found" msgstr "" #: ../../bootlook.pm_.c:230 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../bootlook.pm_.c:230 #, fuzzy, c-format msgid "Write %s" msgstr "XFree %s" #: ../../bootlook.pm_.c:232 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../bootlook.pm_.c:243 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../bootlook.pm_.c:246 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" #: ../../bootlook.pm_.c:252 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../bootlook.pm_.c:256 msgid "Relaunch 'lilo'" msgstr "" #: ../../bootlook.pm_.c:258 ../../standalone/draksplash_.c:165 #: ../../standalone/draksplash_.c:329 ../../standalone/draksplash_.c:456 #, fuzzy msgid "Notice" msgstr "Sem vídeo" #: ../../bootlook.pm_.c:259 msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../bootlook.pm_.c:259 #, fuzzy msgid "Theme installation failed!" msgstr "Selecione a classe da instalação" #: ../../bootlook.pm_.c:267 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Você está utilizando o %s como gerenciador de inicialização.\n" "Clique em Configurar para abrir o auxiliar de configuração." #: ../../bootlook.pm_.c:269 ../../standalone/drakbackup_.c:2429 #: ../../standalone/drakbackup_.c:2439 ../../standalone/drakbackup_.c:2449 #: ../../standalone/drakbackup_.c:2457 ../../standalone/drakgw_.c:554 msgid "Configure" msgstr "Configurar" #: ../../bootlook.pm_.c:276 #, fuzzy msgid "Splash selection" msgstr "Salvar seleção de pacotes" #: ../../bootlook.pm_.c:279 msgid "Themes" msgstr "" #: ../../bootlook.pm_.c:281 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" #: ../../bootlook.pm_.c:284 msgid "Lilo screen" msgstr "" #: ../../bootlook.pm_.c:289 msgid "Bootsplash" msgstr "" #: ../../bootlook.pm_.c:324 msgid "System mode" msgstr "Modo do sistema" #: ../../bootlook.pm_.c:326 msgid "Launch the graphical environment when your system starts" msgstr "Executar o sistema X-Window na inicialização" #: ../../bootlook.pm_.c:331 msgid "No, I don't want autologin" msgstr "Não, eu não quero autologin" #: ../../bootlook.pm_.c:333 msgid "Yes, I want autologin with this (user, desktop)" msgstr "Sim, eu quero autologin com esse (usuário, desktop)" #: ../../bootlook.pm_.c:343 ../../network/netconnect.pm_.c:97 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 #: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4193 #: ../../standalone/drakbackup_.c:4956 ../../standalone/drakconnect_.c:108 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667 #: ../../standalone/drakfont_.c:612 ../../standalone/drakfont_.c:799 #: ../../standalone/drakfont_.c:876 ../../standalone/drakfont_.c:963 #: ../../ugtk.pm_.c:289 msgid "OK" msgstr "OK" #: ../../bootlook.pm_.c:403 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "não foi possívek abrir /etc/inittb para leitura: %s" #: ../../common.pm_.c:99 msgid "GB" msgstr "GB" #: ../../common.pm_.c:99 msgid "KB" msgstr "KB" #: ../../common.pm_.c:99 msgid "MB" msgstr "MB" #: ../../common.pm_.c:107 msgid "TB" msgstr "TB" #: ../../common.pm_.c:115 #, c-format msgid "%d minutes" msgstr "%d minutos" #: ../../common.pm_.c:117 msgid "1 minute" msgstr "1 minuto" #: ../../common.pm_.c:119 #, c-format msgid "%d seconds" msgstr "%d segundos" #: ../../common.pm_.c:164 msgid "Can't make screenshots before partitioning" msgstr "Não posso fazer screenshots antes de particionar" #: ../../common.pm_.c:171 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Screenshots estarão disponíveis depois da instalação em %s" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:113 msgid "France" msgstr "França" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "Costa Rica" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:116 msgid "Belgium" msgstr "Bélgica" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "República Tcheca" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "Alemanha" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "Grécia" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "Noruega" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "Suécia" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:114 msgid "Netherlands" msgstr "Holanda" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:115 ../../standalone/drakxtv_.c:68 msgid "Italy" msgstr "Itália" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "Áustria" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:117 msgid "United States" msgstr "Estados Unidos" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/dav.pm_.c:27 #, fuzzy msgid "New" msgstr "novo" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "Desmontar" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:389 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "Montar" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "servidor" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:383 #: ../../diskdrake/interactive.pm_.c:572 ../../diskdrake/interactive.pm_.c:599 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15 #: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "Ponto de Montagem" #: ../../diskdrake/dav.pm_.c:85 #, fuzzy msgid "Please enter the WebDAV server URL" msgstr "Favor testar o mouse" #: ../../diskdrake/dav.pm_.c:88 #, fuzzy msgid "The URL must begin with http:// or https://" msgstr "O proxy deve ser http://..." #: ../../diskdrake/dav.pm_.c:109 #, fuzzy msgid "Server: " msgstr "servidor" #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:444 #: ../../diskdrake/interactive.pm_.c:1093 #: ../../diskdrake/interactive.pm_.c:1168 msgid "Mount point: " msgstr "Ponto de montagem: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1174 #, c-format msgid "Options: %s" msgstr "Opções: %s" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "Favor primeiro fazer um backup de seus dados" #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:938 #: ../../diskdrake/interactive.pm_.c:947 #: ../../diskdrake/interactive.pm_.c:1013 msgid "Read carefully!" msgstr "Ler com atenção!" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Se você planejar usar aboot, lembre-se de deixar espaço livre (2048 setores " "é suficiente)\n" "no início do disco" #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "Ajudante" #: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "Escolher ação" #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Você tem uma grande partição fat\n" "(normalmente utilizada pelo MicroSoft Dos/Windows.)\n" "Eu sugiro você a primeiro redimensionar a partição\n" "(clique nela, depois clique em \"Redimensinar\")" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "Please click on a partition" msgstr "Favor clicar em uma partição" #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:465 msgid "Details" msgstr "Detalhes" #: ../../diskdrake/hd_gtk.pm_.c:252 #, fuzzy msgid "No hard drives found" msgstr "Impressora local" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Journalised FS" msgstr "Journalised FS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1109 msgid "Empty" msgstr "Vazio" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:325 #: ../../install_steps_gtk.pm_.c:383 ../../mouse.pm_.c:165 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1756 msgid "Other" msgstr "Outro" #: ../../diskdrake/hd_gtk.pm_.c:328 msgid "Filesystem types:" msgstr "Tipos de sistema de arquivo:" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:406 msgid "Create" msgstr "Criar" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:384 #: ../../diskdrake/interactive.pm_.c:535 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "Tipo" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347 #, c-format msgid "Use ``%s'' instead" msgstr "Use ``%s'' ao invés" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:393 msgid "Delete" msgstr "Deletar" #: ../../diskdrake/hd_gtk.pm_.c:351 msgid "Use ``Unmount'' first" msgstr "Use ``Desmontar'' primeiro" #: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:522 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Após alterar o tipo da partição %s, todos os dados desta partição serão " "perdidos" #: ../../diskdrake/interactive.pm_.c:174 msgid "Choose a partition" msgstr "Escolher partição" #: ../../diskdrake/interactive.pm_.c:174 msgid "Choose another partition" msgstr "Escolher outra partição" #: ../../diskdrake/interactive.pm_.c:199 msgid "Exit" msgstr "Sair" #: ../../diskdrake/interactive.pm_.c:225 msgid "Toggle to expert mode" msgstr "Mudar para modo expert" #: ../../diskdrake/interactive.pm_.c:225 msgid "Toggle to normal mode" msgstr "Mudar para modo normal" #: ../../diskdrake/interactive.pm_.c:225 msgid "Undo" msgstr "Desfazer" #: ../../diskdrake/interactive.pm_.c:244 msgid "Continue anyway?" msgstr "Continuar mesmo assim?" #: ../../diskdrake/interactive.pm_.c:249 msgid "Quit without saving" msgstr "Sair sem salvar" #: ../../diskdrake/interactive.pm_.c:249 msgid "Quit without writing the partition table?" msgstr "Sair sem gravar na tabela de partição?" #: ../../diskdrake/interactive.pm_.c:254 msgid "Do you want to save /etc/fstab modifications" msgstr "Você quer salvar as modificações /etc/fstab" #: ../../diskdrake/interactive.pm_.c:267 msgid "Auto allocate" msgstr "Auto alocar" #: ../../diskdrake/interactive.pm_.c:267 msgid "Clear all" msgstr "Limpar tudo" #: ../../diskdrake/interactive.pm_.c:267 #: ../../install_steps_interactive.pm_.c:214 msgid "More" msgstr "Mais" #: ../../diskdrake/interactive.pm_.c:271 msgid "Hard drive information" msgstr "Informação de discos rigidos" #: ../../diskdrake/interactive.pm_.c:302 msgid "All primary partitions are used" msgstr "Todas as partições primárias estão sendo usadas" #: ../../diskdrake/interactive.pm_.c:303 msgid "I can't add any more partition" msgstr "Eu não posso adicionar mais nenhuma partição" #: ../../diskdrake/interactive.pm_.c:304 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Para ter mais partições, favor deletar uma para poder criar uma partição " "extendida" #: ../../diskdrake/interactive.pm_.c:314 msgid "Save partition table" msgstr "Gravar tabela de partição" #: ../../diskdrake/interactive.pm_.c:315 msgid "Restore partition table" msgstr "Restaurar tabela de partição" #: ../../diskdrake/interactive.pm_.c:316 msgid "Rescue partition table" msgstr "Recuperar tabela de partição" #: ../../diskdrake/interactive.pm_.c:318 msgid "Reload partition table" msgstr "Recuperar tabela de partição" #: ../../diskdrake/interactive.pm_.c:323 msgid "Removable media automounting" msgstr "Auto-montagem da mídia removível" #: ../../diskdrake/interactive.pm_.c:332 ../../diskdrake/interactive.pm_.c:352 msgid "Select file" msgstr "Selecione arquivo" #: ../../diskdrake/interactive.pm_.c:339 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "O backup da tabela de partição não tem o mesmo tamanho\n" "Ainda continuar?" #: ../../diskdrake/interactive.pm_.c:353 ../../harddrake/sound.pm_.c:200 msgid "Warning" msgstr "Aviso" #: ../../diskdrake/interactive.pm_.c:354 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Insira um disquete no drive\n" "Todos os dados no disquete serão perdidos" #: ../../diskdrake/interactive.pm_.c:365 msgid "Trying to rescue partition table" msgstr "Tentando resgatar tabela de partição" #: ../../diskdrake/interactive.pm_.c:371 msgid "Detailed information" msgstr "Mostrar informação detalhada" #: ../../diskdrake/interactive.pm_.c:386 ../../diskdrake/interactive.pm_.c:666 msgid "Resize" msgstr "Redimensionar" #: ../../diskdrake/interactive.pm_.c:387 ../../diskdrake/interactive.pm_.c:719 msgid "Move" msgstr "Mover" #: ../../diskdrake/interactive.pm_.c:388 msgid "Format" msgstr "Formatar" #: ../../diskdrake/interactive.pm_.c:390 msgid "Add to RAID" msgstr "Adicionar ao RAID" #: ../../diskdrake/interactive.pm_.c:391 msgid "Add to LVM" msgstr "Adicionar ao LVM" #: ../../diskdrake/interactive.pm_.c:394 msgid "Remove from RAID" msgstr "Remover do RAID" #: ../../diskdrake/interactive.pm_.c:395 msgid "Remove from LVM" msgstr "Remover do LVM" #: ../../diskdrake/interactive.pm_.c:396 msgid "Modify RAID" msgstr "Modificar RAID" #: ../../diskdrake/interactive.pm_.c:397 msgid "Use for loopback" msgstr "Usar para loopback" #: ../../diskdrake/interactive.pm_.c:437 msgid "Create a new partition" msgstr "Criar uma nova partição" #: ../../diskdrake/interactive.pm_.c:440 msgid "Start sector: " msgstr "Setor inicial: " #: ../../diskdrake/interactive.pm_.c:442 ../../diskdrake/interactive.pm_.c:819 msgid "Size in MB: " msgstr "Tamanho em MB: " #: ../../diskdrake/interactive.pm_.c:443 ../../diskdrake/interactive.pm_.c:820 msgid "Filesystem type: " msgstr "Tipo do Sistema de Arquivos: " #: ../../diskdrake/interactive.pm_.c:448 msgid "Preference: " msgstr "Preferência: " #: ../../diskdrake/interactive.pm_.c:473 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm_.c:503 msgid "Remove the loopback file?" msgstr "Remove o arquivo de loopback?" #: ../../diskdrake/interactive.pm_.c:533 msgid "Change partition type" msgstr "Mudar tipo de partição" #: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "Qual sistema de arquivos você quer?" #: ../../diskdrake/interactive.pm_.c:540 msgid "Switching from ext2 to ext3" msgstr "Mudando de ext2 para ext3" #: ../../diskdrake/interactive.pm_.c:570 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Onde você quer montar o arquivo loopback %s?" #: ../../diskdrake/interactive.pm_.c:571 #, c-format msgid "Where do you want to mount device %s?" msgstr "Onde você quer montar o dispositivo %s?" #: ../../diskdrake/interactive.pm_.c:577 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Não posso desmacar o ponto de montagem enquanto a partição for\n" "usada para loop back. Remova o loopback primeiro" #: ../../diskdrake/interactive.pm_.c:598 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "Onde você quer montar o dispositivo %s?" #: ../../diskdrake/interactive.pm_.c:622 msgid "Computing FAT filesystem bounds" msgstr "Computando limites do sistema de arquivo fat" #: ../../diskdrake/interactive.pm_.c:622 ../../diskdrake/interactive.pm_.c:681 #: ../../install_interactive.pm_.c:133 msgid "Resizing" msgstr "Redimensionando" #: ../../diskdrake/interactive.pm_.c:654 msgid "This partition is not resizeable" msgstr "Esta partição não é redimensionável" #: ../../diskdrake/interactive.pm_.c:659 msgid "All data on this partition should be backed-up" msgstr "Você deveria fazer backup de todos os dados desta partição" #: ../../diskdrake/interactive.pm_.c:661 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Após redimensionar a particão %s, todos os dados da partição serão perdidos" #: ../../diskdrake/interactive.pm_.c:666 msgid "Choose the new size" msgstr "Escolha o novo tamanho" #: ../../diskdrake/interactive.pm_.c:667 msgid "New size in MB: " msgstr "Novo tamanho em MB: " #: ../../diskdrake/interactive.pm_.c:720 msgid "Which disk do you want to move it to?" msgstr "Qual disco você quer mover?" #: ../../diskdrake/interactive.pm_.c:721 msgid "Sector" msgstr "Setor" #: ../../diskdrake/interactive.pm_.c:722 msgid "Which sector do you want to move it to?" msgstr "Qual setor você quer mover?" #: ../../diskdrake/interactive.pm_.c:725 msgid "Moving" msgstr "Movendo" #: ../../diskdrake/interactive.pm_.c:725 msgid "Moving partition..." msgstr "Movendo partição..." #: ../../diskdrake/interactive.pm_.c:742 msgid "Choose an existing RAID to add to" msgstr "Escolha um RAID existente para adicionar" #: ../../diskdrake/interactive.pm_.c:743 ../../diskdrake/interactive.pm_.c:760 msgid "new" msgstr "novo" #: ../../diskdrake/interactive.pm_.c:758 msgid "Choose an existing LVM to add to" msgstr "Escolha um LVM existente para adicionar" #: ../../diskdrake/interactive.pm_.c:763 msgid "LVM name?" msgstr "Nome LVM?" #: ../../diskdrake/interactive.pm_.c:804 msgid "This partition can't be used for loopback" msgstr "Essa partição não pode ser usada para loopback" #: ../../diskdrake/interactive.pm_.c:817 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm_.c:818 msgid "Loopback file name: " msgstr "Nome do arquivo loopback: " #: ../../diskdrake/interactive.pm_.c:823 msgid "Give a file name" msgstr "Dê um nome de arquivo" #: ../../diskdrake/interactive.pm_.c:826 msgid "File already used by another loopback, choose another one" msgstr "Arquivo já utilizado por outro loopback, escolha outro" #: ../../diskdrake/interactive.pm_.c:827 msgid "File already exists. Use it?" msgstr "Arquivo já existe. Utilizá-lo?" #: ../../diskdrake/interactive.pm_.c:850 msgid "Mount options" msgstr "Opções de montagem" #: ../../diskdrake/interactive.pm_.c:857 msgid "Various" msgstr "Vários" #: ../../diskdrake/interactive.pm_.c:921 ../../standalone/drakfloppy_.c:104 msgid "device" msgstr "dispositivos" #: ../../diskdrake/interactive.pm_.c:922 msgid "level" msgstr "nível" #: ../../diskdrake/interactive.pm_.c:923 msgid "chunk size" msgstr "tamanho do bloco" #: ../../diskdrake/interactive.pm_.c:938 msgid "Be careful: this operation is dangerous." msgstr "Tenha cuidade: essa operação é perigosa." #: ../../diskdrake/interactive.pm_.c:953 msgid "What type of partitioning?" msgstr "Qual tipo de particionamento?" #: ../../diskdrake/interactive.pm_.c:969 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "O pacote %s precisa ser instalado. Você deseja instalá-lo?" #: ../../diskdrake/interactive.pm_.c:983 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Desculpe, eu não aceitarei criar /boot tão distante do driver (em um cilindo " "> 1024).\n" "Ou você usa LILO e ele não funcionará, ou você não usará LILO e você não " "precisará de /boot" #: ../../diskdrake/interactive.pm_.c:987 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "A partição que você selecionou para adicionar como root (/) é fisicamente " "localizada além\n" "do cilindro 1024 do disco rígido, e você não possui uma partição /boot.\n" "Se você quer usar o gerenciador de inicialização LILO, não esqueça " "deadicionar uma partição /boot." #: ../../diskdrake/interactive.pm_.c:993 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Você selecionou uma partição software RAID como root (/).\n" "O gerenciador de inicialização não consegue acessá-lo sem uma\n" "partição /boot. Então não esqueça de adicioná-la" #: ../../diskdrake/interactive.pm_.c:1013 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "A tabela de partição do drive %s está para ser gravada no disco!" #: ../../diskdrake/interactive.pm_.c:1017 msgid "You'll need to reboot before the modification can take place" msgstr "Você precisará reiniciar antes que as modificações tenham efeito" #: ../../diskdrake/interactive.pm_.c:1028 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Após formatar a partição %s, todos os dados desta partição serão perdidos" #: ../../diskdrake/interactive.pm_.c:1030 msgid "Formatting" msgstr "Formatando" #: ../../diskdrake/interactive.pm_.c:1031 #, c-format msgid "Formatting loopback file %s" msgstr "Formatando arquivo loopback %s" #: ../../diskdrake/interactive.pm_.c:1032 #: ../../install_steps_interactive.pm_.c:459 #, c-format msgid "Formatting partition %s" msgstr "Formatando partição %s" #: ../../diskdrake/interactive.pm_.c:1043 msgid "Hide files" msgstr "Esconder arquivos" #: ../../diskdrake/interactive.pm_.c:1043 msgid "Move files to the new partition" msgstr "Mover arquivos para nova partição" #: ../../diskdrake/interactive.pm_.c:1044 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Diretório %s já contém alguns dados\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1055 msgid "Moving files to the new partition" msgstr "Movendo arquivos para a nova partição" #: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "Copying %s" msgstr "Copiando %s" #: ../../diskdrake/interactive.pm_.c:1063 #, c-format msgid "Removing %s" msgstr "Removing %s" #: ../../diskdrake/interactive.pm_.c:1073 #, c-format msgid "partition %s is now known as %s" msgstr "Partição %s agora chama-se %s" #: ../../diskdrake/interactive.pm_.c:1094 #: ../../diskdrake/interactive.pm_.c:1153 msgid "Device: " msgstr "Dispositivo: " #: ../../diskdrake/interactive.pm_.c:1095 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Letra do drive no DOS: %s (apena um palpite)\n" #: ../../diskdrake/interactive.pm_.c:1099 #: ../../diskdrake/interactive.pm_.c:1107 #: ../../diskdrake/interactive.pm_.c:1172 msgid "Type: " msgstr "Tipo: " #: ../../diskdrake/interactive.pm_.c:1103 msgid "Name: " msgstr "Nome: " #: ../../diskdrake/interactive.pm_.c:1111 #, c-format msgid "Start: sector %s\n" msgstr "Iniciar: setor: %s\n" #: ../../diskdrake/interactive.pm_.c:1112 #, c-format msgid "Size: %s" msgstr "Tamanho: %s" #: ../../diskdrake/interactive.pm_.c:1114 #, c-format msgid ", %s sectors" msgstr ", %s setores" #: ../../diskdrake/interactive.pm_.c:1116 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "Cilindro %d ao cilindro %d\n" #: ../../diskdrake/interactive.pm_.c:1117 msgid "Formatted\n" msgstr "Formatado\n" #: ../../diskdrake/interactive.pm_.c:1118 msgid "Not formatted\n" msgstr "Não formatado\n" #: ../../diskdrake/interactive.pm_.c:1119 msgid "Mounted\n" msgstr "Montado\n" #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1122 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback file(s):\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1123 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partição de inicialização padrão\n" " (para inicialização do MS-DOS, não para o lilo)\n" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Level %s\n" msgstr "Nível %s\n" #: ../../diskdrake/interactive.pm_.c:1126 #, c-format msgid "Chunk size %s\n" msgstr "Tamanho do bloco %s\n" #: ../../diskdrake/interactive.pm_.c:1127 #, c-format msgid "RAID-disks %s\n" msgstr "Discos RAID %s\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "Loopback file name: %s" msgstr "Nome do arquivo loopback: %s" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "É provável que está partição seja uma\n" "partição Driver, você provavelmente\n" "não deveria mexer nela.\n" #: ../../diskdrake/interactive.pm_.c:1135 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Essa partição especial\n" "Bootstrap é para o\n" "boot-duplo do seu sistema.\n" #: ../../diskdrake/interactive.pm_.c:1154 msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm_.c:1155 #, c-format msgid "Size: %s\n" msgstr "Tamanho: %s\n" #: ../../diskdrake/interactive.pm_.c:1156 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometria: %s cilindros, %s cabeças, %s setores\n" #: ../../diskdrake/interactive.pm_.c:1157 msgid "Info: " msgstr "Informação: " #: ../../diskdrake/interactive.pm_.c:1158 #, c-format msgid "LVM-disks %s\n" msgstr "Discos LVM %s\n" #: ../../diskdrake/interactive.pm_.c:1159 #, c-format msgid "Partition table type: %s\n" msgstr "Tipo da tabela de partição: %s\n" #: ../../diskdrake/interactive.pm_.c:1160 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "no barramento %d id %d\n" #: ../../diskdrake/interactive.pm_.c:1190 msgid "Filesystem encryption key" msgstr "Chave criptográfica do sistema de arquivos" #: ../../diskdrake/interactive.pm_.c:1191 msgid "Choose your filesystem encryption key" msgstr "Escolha a sua chave criptográfica do sistema de arquivos" #: ../../diskdrake/interactive.pm_.c:1194 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Essa chave é muito simples (deve ter ao menos %d caracteres)" #: ../../diskdrake/interactive.pm_.c:1195 msgid "The encryption keys do not match" msgstr "As chaves criptográficas não conferem" #: ../../diskdrake/interactive.pm_.c:1198 msgid "Encryption key" msgstr "Chave criptográfica" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Encryption key (again)" msgstr "Chave criptográfica (de novo)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "Mudar tipo" #: ../../diskdrake/removable_gtk.pm_.c:28 msgid "Please click on a medium" msgstr "Favor clicar em uma mídia" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 #, fuzzy msgid "Domain Authentication Required" msgstr "Autenticação?" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Another one" msgstr "Internet" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Which username" msgstr "Nome do usuário" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3529 #, fuzzy msgid "Username" msgstr "Nome do usuário" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 #, fuzzy msgid "Domain" msgstr "Domínio NIS" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "Servidores de busca" #: ../../fs.pm_.c:545 ../../fs.pm_.c:555 ../../fs.pm_.c:559 ../../fs.pm_.c:563 #: ../../fs.pm_.c:567 ../../fs.pm_.c:571 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatação de %s falhou" #: ../../fs.pm_.c:608 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Eu não sei como formatar %s no tipo %s" #: ../../fs.pm_.c:682 ../../fs.pm_.c:725 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm_.c:740 ../../partition_table.pm_.c:598 #, c-format msgid "error unmounting %s: %s" msgstr "erro desmontando %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "simples" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "servidor" #: ../../fsedit.pm_.c:240 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Eu não consigo ler sua tabela de partição, é muito defeituosa para mim :(\n" "Eu posso tentar continuar limpando as partições defeituosas (TODOS OS DADOS\n" "serão perdidos!). A outra solução é não deixar o DrakX modificar a tabela\n" "de particão. (o erro é %s)\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Você não pode usar JFS em partições menores que 16MB" #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Você não pode usar ReiserFS em partições menores que 32MB" #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "Pontos de montagem devem começar com uma /" #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Já existe uma partição no ponto de montagem %s\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Você não pode usar um Volume Lógivo LVM para o ponto de montagem %s" #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "Esse diretório deveria permanecer dentro do sistema de arquivo root" #: ../../fsedit.pm_.c:530 #, fuzzy msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Você precisa de um verdadeiro sistema de arquivo (ext2, reiserfs) para esse " "ponto de montagem\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Você não pode usar um sistema de arquivos criptografado como ponto de " "montagem %s" #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "Sem espaço livre suficiente para auto-alocação" #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "Nada a fazer" #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "Erro abrindo %s para gravação: %s" #: ../../harddrake/sound.pm_.c:168 msgid "No alternative driver" msgstr "" #: ../../harddrake/sound.pm_.c:169 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../harddrake/sound.pm_.c:171 #, fuzzy msgid "Sound configuration" msgstr "Configuração LAN" #: ../../harddrake/sound.pm_.c:172 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm_.c:176 #, fuzzy msgid "Driver:" msgstr "Driver" #: ../../harddrake/sound.pm_.c:181 ../../standalone/drakTermServ_.c:246 #: ../../standalone/drakbackup_.c:3932 ../../standalone/drakbackup_.c:3965 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4018 #: ../../standalone/drakbackup_.c:4045 ../../standalone/drakbackup_.c:4084 #: ../../standalone/drakbackup_.c:4105 ../../standalone/drakbackup_.c:4132 #: ../../standalone/drakbackup_.c:4162 ../../standalone/drakbackup_.c:4188 #: ../../standalone/drakbackup_.c:4213 ../../standalone/drakfont_.c:700 #, fuzzy msgid "Help" msgstr "/Aj_uda" #: ../../harddrake/sound.pm_.c:183 msgid "Switching between ALSA and OSS help" msgstr "" #: ../../harddrake/sound.pm_.c:184 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm_.c:200 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm_.c:203 ../../standalone/drakconnect_.c:301 msgid "Please Wait... Applying the configuration" msgstr "Por favor aguarde... Aplicando a configuração" #: ../../harddrake/sound.pm_.c:203 ../../harddrake/ui.pm_.c:111 #: ../../interactive.pm_.c:391 msgid "Please wait" msgstr "Por favor aguarde" #: ../../harddrake/sound.pm_.c:208 msgid "No known driver" msgstr "" #: ../../harddrake/sound.pm_.c:209 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../harddrake/sound.pm_.c:212 msgid "Unkown driver" msgstr "" #: ../../harddrake/sound.pm_.c:213 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "\n" "with subject: unlisted sound driver \"%s\"" msgstr "" #: ../../harddrake/ui.pm_.c:16 #, fuzzy msgid "Model" msgstr "Mouse" #: ../../harddrake/ui.pm_.c:16 #, fuzzy msgid "hard disk model" msgstr "Memória da Placa (DMA)" #: ../../harddrake/ui.pm_.c:17 #, fuzzy msgid "Channel" msgstr "Cancelar" #: ../../harddrake/ui.pm_.c:17 msgid "EIDE/SCSI channel" msgstr "" #: ../../harddrake/ui.pm_.c:19 msgid "Bus" msgstr "" #: ../../harddrake/ui.pm_.c:20 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../harddrake/ui.pm_.c:21 #, fuzzy msgid "Module" msgstr "Mouse" #: ../../harddrake/ui.pm_.c:21 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "" #: ../../harddrake/ui.pm_.c:22 msgid "Media class" msgstr "" #: ../../harddrake/ui.pm_.c:22 msgid "class of hardware device" msgstr "" #: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1562 msgid "Description" msgstr "Descrição" #: ../../harddrake/ui.pm_.c:23 msgid "this field describe the device" msgstr "" #: ../../harddrake/ui.pm_.c:25 #, fuzzy msgid "Bus identification" msgstr "Autenticação?" #: ../../harddrake/ui.pm_.c:26 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "" #: ../../harddrake/ui.pm_.c:28 msgid "Location on the bus" msgstr "" #: ../../harddrake/ui.pm_.c:29 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../harddrake/ui.pm_.c:32 #, fuzzy msgid "Old device file" msgstr "Selecione arquivo" #: ../../harddrake/ui.pm_.c:33 msgid "old static device name used in dev package" msgstr "" #: ../../harddrake/ui.pm_.c:34 #, fuzzy msgid "New devfs device" msgstr "Dispositivo de gateway" #: ../../harddrake/ui.pm_.c:35 msgid "new dinamic device name generated by incore kernel devfs" msgstr "" #: ../../harddrake/ui.pm_.c:36 #, fuzzy msgid "Number of buttons" msgstr "2 botões" #: ../../harddrake/ui.pm_.c:37 msgid "the vendor name of the device" msgstr "" #: ../../harddrake/ui.pm_.c:38 #, fuzzy msgid "Alternative drivers" msgstr "Imprimindo página(s) de teste..." #: ../../harddrake/ui.pm_.c:39 msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../harddrake/ui.pm_.c:63 #, fuzzy msgid "/_Quit" msgstr "Sair" #: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65 #: ../../harddrake/ui.pm_.c:71 ../../harddrake/ui.pm_.c:73 #: ../../standalone/logdrake_.c:111 msgid "/_Help" msgstr "/Aj_uda" #: ../../harddrake/ui.pm_.c:65 #, fuzzy msgid "/_Help..." msgstr "/Aj_uda" #: ../../harddrake/ui.pm_.c:66 msgid "Harddrake help" msgstr "" #: ../../harddrake/ui.pm_.c:67 msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../harddrake/ui.pm_.c:71 msgid "/_Report Bug" msgstr "/_Reportar erro" #: ../../harddrake/ui.pm_.c:73 #, fuzzy msgid "/_About..." msgstr "/Ajuda/_Sobre..." #: ../../harddrake/ui.pm_.c:74 msgid "About Harddrake" msgstr "" #: ../../harddrake/ui.pm_.c:75 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../harddrake/ui.pm_.c:76 #, fuzzy msgid "Author:" msgstr "Auto detectar" #: ../../harddrake/ui.pm_.c:86 #, fuzzy msgid "Harddrake2 version " msgstr "Detecção de discos rigidos" #: ../../harddrake/ui.pm_.c:101 #, fuzzy msgid "Detected hardware" msgstr "Ver informação do hardware" #: ../../harddrake/ui.pm_.c:103 #, fuzzy msgid "Information" msgstr "Mostrar informação" #: ../../harddrake/ui.pm_.c:106 #, fuzzy msgid "Configure module" msgstr "Configurar mouse" #: ../../harddrake/ui.pm_.c:107 msgid "Run config tool" msgstr "" #: ../../harddrake/ui.pm_.c:111 #, fuzzy msgid "Detection in progress" msgstr "detectado na porta %s" #: ../../harddrake/ui.pm_.c:148 msgid "You can configure each parameter of the module here." msgstr "" #: ../../harddrake/ui.pm_.c:166 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../harddrake/ui.pm_.c:180 #, c-format msgid "Probing %s class\n" msgstr "" #: ../../harddrake/ui.pm_.c:201 msgid "primary" msgstr "" #: ../../harddrake/ui.pm_.c:201 #, fuzzy msgid "secondary" msgstr "%d segundos" #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 #, fuzzy msgid "Auto-detect" msgstr "Usar auto detecção" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:185 #, fuzzy msgid "Unknown|Generic" msgstr "Genérico" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:209 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:212 #, fuzzy msgid "Card model:" msgstr "Memória da Placa (DMA)" #: ../../harddrake/v4l.pm_.c:213 #, fuzzy msgid "Tuner type:" msgstr "Mudar tipo" #: ../../harddrake/v4l.pm_.c:214 msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm_.c:214 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:216 #, fuzzy msgid "PLL setting:" msgstr "Formatando" #: ../../harddrake/v4l.pm_.c:217 msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm_.c:217 msgid "enable radio support" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" "GNU/Linux é um sistema multiusuário, e isto significa que cada usuário pode " "ter suas\n" "próprias preferências, seus próprios arquivos, e assim em diante. Você pode " "ler o \n" "``Guia do Usuário'' para aprender mais. Mas, ao contrário do \"root\", que é " "o administrador \n" "do sistema, os usuários a serem adicionados não terão direito a modificar " "nada, a não \n" "ser seus próprios arquivos e suas próprias configurações. Você deverá criar " "ao menos uma conta regular para você mesmo. Embora seja muito prático logar " "como \"root\" todo \n" "dia, também pode ser muito perigoso! O menor engano pode significar que o " "seu sistema\n" "não funcionará mais. Se você comete um engano sério como usuário regular, " "você \n" "somente perde informação, e não o sistema inteiro.\n" "\n" "Primeiro você deve entrar o seu nome real. Isto não é obrigatório, é claro " "-\n" "porque você pode entrar, na verdade, o que você quiser. DrakX irá, depois, " "pegar a \n" "primeira palavra que você digitou na caixa e colocar como \"User\n" "name\". Este é o nome que este usuário específico irá usar paralogar no " "sistema. \n" "Você pode mudá-lo. Depois você deverá entrar uma senha. Uma\n" "senha de usuário não privilegiado (regular) não é tão crucial\n" "quanto a de \"root\", do ponto de vista da segurança, mas isto não é razão " "para\n" "negligenciar esta senha, pois afinal, são os seus arquivos que estão lá.\n" "\n" "Se você clicar em \"Aceitar usuário\" você poderá depois adicionar quantos " "quiser.\n" "Adicione um usuário para cada um dos seus amigos: seu pai, ou sua irmão, " "por\n" "exemplo. Depois que terminar de adicionar os usuários, selecione \"Feito\".\n" "\n" "Clicando em \"Avançado\" permite que você mude o \"shell\"\n" "default para aquele usuário (bash por default)." #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Acima estão listadas as partições Linux detectadas no\n" "seu disco rígido. Você pode manter as opções feitas pelo o ajudante, elas " "são\n" "boas para o uso diário. Se você quiser alterar essas opções, você deve ao\n" "menos definir uma partição (\"/\"). Não escolhe uma partição muito pequena " "ou você\n" "não será capaz de instalar software suficiente. Se você quiser guardar seus " "dados em\n" "uma partição separada, você precisa escolher uma \"/home\" (apenas possível " "se você\n" "tiver mais de uma partição Linux disponível).\n" "\n" "Nota: cada partição é listada da seguinte forma: \"Nome\", \"Capacidade\".\n" "\n" "\n" "\"Nome\" é codificado da seguinte maneira: \"tipo do disco rígido\", " "\"número\n" "do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n" "\n" "\n" "\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n" "se ele for um disco rígido SCSI.\n" "\n" "\n" "\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com " "discos rígidos IDE:\n" "\n" " * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n" "\n" " * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n" "\n" " * \"c\" significa \"disco rígido mestre na controladora IDE secundária" "\",\n" "\n" " * \"d\" significa \"disco rígido escravo na controladora IDE secundária" "\",\n" "\n" "\n" "Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" " "significa \"disco rígido secundário\", etc..." #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "O instalador do Linux Mandrake está espalhado em diferentes CD-ROMS. O " "DrakX\n" "sabe se um pacote selecionado está localizado em outro CD-ROM e irá ejetar\n" "o CD-ROM atual e pedir para você inserir o CD-ROM necessário." #: ../../help.pm_.c:84 #, fuzzy msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "Agora você deverá especificar quais programas você deseja instalar no seu\n" "sistema. Existem milhares de pacotes disponíveis para o Mandrake Linux, e\n" "você não precisa conhecê-los todos de cabeça.\n" "\n" "Se você está fazendo uma instalação padrão por CD-ROM, você primeiro\n" "será questionado sobre que CDs você tem (somente em modo expert). Confirme\n" "os nomes dos CDs e cheque as caixas de diálogo correspondentes aos CDs\n" "que você tem disponíveis. Clique \"OK\" quando estiver pronto para " "continuar.\n" "\n" "Os pacotes estão separados em grupos correspondendo a um uso particular\n" "da sua máquina. Os grupos estão organizados em quatro sessões:\n" "\n" " * \"Workstation\": Se você planeja usar sua máquina como estação de " "trabalho, selecione\n" "um ou mais dos grupos correspondentes.\n" "\n" " * \"Development\": Se a máquina será usada para programação, escolha o\n" "grupo desejado(s).\n" "\n" " * \"Server\": se a máquina será um servidor, você poderá escolher\n" "quais dos serviços mais comuns você deseja instalar na\n" "máquina.\n" "\n" " * \"Graphical Environment\": finalmente, este é onde você irá escolher seu\n" "ambiente gráfico preferido. Pelo menos um tem que ser selecionado, se você " "quer\n" "ter uma estação de trabalho gráfica!\n" "\n" "Movendo o mouse em cima de um nome de grupo irá mostrar uma pequena " "explicação\n" "sobre o grupo. Se você não selecionar nenhum grupo enquanto faz\n" "uma instalação regular (em oposição a um upgrade); um diálogo irá aparecer\n" "propondo um tipo diferente de instalação mínima:\n" "\n" " * Irá instalar o mínimo necessário para ter um sistema linux rodando,\n" "em linha de comando somente.\n" "\n" " * Instalar o sistema básico e mais os aplicativos básicos\n" "\n" " * Instalar os pacotes mínimos necessários para ter um ambiente gráfico\n" "\n" "Você pode checar a caixa \"Selecão individual de pacotes\", que é útil se\n" "você está familiarizado com os pacotes sendo oferecidos ou se você deseja\n" "ter total controle sobre o que será instalado.\n" "\n" "Se você começou a instalação em modo \"Upgrade\", você pode des-selecionar " "todos os\n" "grupos para evitar instalar qualquer pacote novo. Isto é útil para reparar " "ou atualizar\n" "um sistema já existente." #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" "Finalmente, dependendo da sua escolha em selecionar ou não pacotes " "individuais,\n" "você será levado a uma árvore contendo todos os pacotes classificados por " "grupos\n" "e subgrupos. Navegando na árvoerer, você poderá selecionar grupos inteiros, " "sub\n" "grupos ou pacotes individuais.\n" "\n" "Quando você seleciona um pacote individual na árvore, uma breve descrição " "aparecerá\n" "à direita. Quando a sua seleção estiver concluída, clique \"Install\" , que\n" "irá iniciar a isntalação. Dependendo da velocidade do seu hardware e do " "número\n" "de pacotes a serem instalados, poderá levar algum tempo. Uma estimativa de " "tempo\n" "necessário é mostrada na tela, para ajudá-lo a pensar se há tempo para uma " "xícara\n" "de café.\n" "\n" "!! Se um pacote de servidor foi selecionado, intencionalmente, ou por ser " "parte de um\n" "grupo, você será instado a confirmar que realmente deseja estes servidores " "instalados.\n" "No Mandrake Linux quaisquer servidores instalados serão iniciados por " "default no boot.\n" "Mesmo se eles são seguros e não possuem quaisquer dúvidas a respeito quando " "da\n" "distribuição do pacote, é possível que brechas de segurança hajam sido " "descobertas\n" "depois que esta versão do Mandrake Linux foi concluída. Se você não sabe o " "que um\n" "certo serviço faz, ou porque está sendo instalado, clique em \"No\". " "Clicando em \"Yes\"\n" "irá automaticamente instalar os serviços listados e eles serão iniciados " "automaticamente\n" "por default.\n" "\n" "A opção \"Dependências automáticas\" simplesmente desabilita a caixa de " "diálogo\n" "de aviso que aparece quando o instalador automaticamente seleciona um " "pacote. Isto\n" "ocorre porque ele determina que é necessário satisfazer uma dependência com " "outro\n" "pacote para completar a instalação corretamente.\n" "\n" "O pequeno ícone de disco floppy no fim da lista permite carregar uma lista " "de pacotes\n" "escolhidos durante uma instalação prévia. Clicando neste ícone você poderá " "inserir\n" "um disco removível criado previamente no fim de uma instalação. Veja a " "segunda dica\n" "do último passo para criar um floppy assim." #: ../../help.pm_.c:171 #, fuzzy msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "Se você deseja conectar seu computador à internet, ou a uma rede local,\n" "por favor escolha a opção correta. Por favor, desligue seu dispositivo, " "antes de fazer a escolha certa para deixar o DrakX detectá-lo " "automaticamente.\n" "\n" "MandrakeLinux propõe a configuração de uma conexão à internet durante a " "instalação\n" "do sistema. As opções disponíveis são modem tradicional, conexão ADSL, cable " "modem,\n" " e finalmente, LAN (Ethernet).\n" "\n" "Aqui nós não iremos detalhar cada configuração. Apenas certifique-se de que " "você tem\n" "todas as informações de seu Provedor de Internet ou administrador do " "sistema.\n" "\n" "Você pode consultar o capítulo do manual sobre conexões de internet para " "mais detalhes\n" "sobre a conexão, ou simplesmente esperar até que o sistema esteja instalado " "e usar o\n" "programa descrito para configurar sua conexão.\n" "\n" "Se você deseja configurar a rede mais tarde, depois da instalação ou se você " "terminou\n" "de configurar sua conexão de rede, clique \"Cancelar\"." #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Você agora pode escolher quais serviços você quer que iniciem na hora da " "inicialização.\n" "\n" "Aqui estarão todos os serviços disponíveis na instalação atual. Reveja " "cuidadosamente e desabilite aqueles que não sõa sempre necessários durante a " "inicialização.\n" "\n" "Quando você colocar o mouse sobre um item, um pequeno balão de ajuda\n" "aparecerá descrevendo a função do serviço. Quando você não tiver certeza se " "um \n" "serviço é útil ou não, é seguro manter o comportamento default.\n" "\n" "Tenha muito cuidado nesse passo, pois se você pretende usar sua máquina como " "um servidor:\n" "você provavelmente vai querer que serviços indesejados não sejam iniciados.\n" "Favor lembrar que vários serviços podem ser perigosos se foram habilitados " "em um\n" "servidor. Em geral, selecione apenas os serviços que você realmente precisa." #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" "O GNU/Linux gerencia o tempo em GMT (Tempo Médio de Grenwich) e traduz\n" "em tempo local de acordo com o fuso horário que você escolheu. Contudo, é " "possível \n" "desativá-lo, deselecionando \"Relógio do hardware configurado para GMT\", de " "forma que \n" "o relógio do hardware seja o mesmo do relógio do sistema. Isto é útil quando " "a máquina \n" "está abrigando outro sistema operacional, como o Windows.\n" "\n" "A opção \"Sincronização Automática de Tempo\" irá automaticamente regular o " "relógio\n" "conectando-o a um servidor remoto de tempo na internet. Na lista " "apresentada\n" "escolha um servidor perto de você. Obviamente, você deve dispor de uma " "conexão\n" " com a internet para isso." #: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" "O X (o sistema X window) é o coração da interface gráfica GNU/Linux\n" "na qual todos os ambientes gráficos (KDE, Gnome, AfterStep, WindowMaker...)\n" "acoplados ao Mandrake Linux se baseiam. Nesta seção, o DrakX\n" "tentará configurar o sistema X automaticamente.\n" "\n" "É muito raro este processo falhar, o que pode ocorrer se o hardware for " "muito velho\n" "(ou muito novo). Se tudo correr bem, ele iniciará o X automaticamente com a " "melhor\n" "resolução possível, dependendo do tamanho do monitor. Uma janela aparecerá \n" "e perguntará se você pode vê-la.\n" "\n" "Se você estiver usando a instalação em modo \"Expert\", você deverá entrar " "no \n" "assistente de configuração X. Veja a seção correspondente do manual para " "mais \n" "informações sobre este assistente.\n" "\n" "Se você conseguir ver a mensagem e responder \"Sim\", então o DrakX seguirá " "para\n" "o próximo passo. Se você não conseguir ver a mensagem, significa que a " "configuração\n" "estava errada, e o teste irá automaticamente terminar em 10 segundos, " "restaurando\n" "a tela." #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "finalmente, você será perguntado se deseja ver a interface gráfica durante a " "inicialização.\n" "Repare que esta opção será apresentada mesmo se você escolher não testar a \n" "configuração. Obviamente, você deverá responder \"Não\" se a sua máquina irá " "funcionar\n" "como um servidor, ou se você não conseguiu configurar o display." #: ../../help.pm_.c:253 #, fuzzy msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" "O CDROM Mandrake Linux possui um modo de resgate embutido. Você pode ter " "acesso\n" "a ele iniciando sua máquina pelo CDROM, apertando >>F1<< durante o boot e " "digitando\n" ">>rescue<< no prompt. No caso de o seu computador não iniciar pelo CDROM, " "você\n" "deverá voltar a este passo em pelo menos duas situações:\n" "\n" " *quando instalando o boot loader, DrakX irá reescrever o setor de boot " "(MBR)\n" "do seu disco rígido principal (não se você estiver usando outro gerenciador " "de boot)\n" "para que você poassa iniciar com o Windows ou com o GNU/Linux (assumindo " "que\n" "você tem Windows no seu sistema). Se você precisar reinstalar o Windows, o " "instalador\n" "da Microsoft irá reescrever o setor de boot, e você não poderá iniciar o GNU/" "Linux!\n" "\n" " *se aparecer um problema, e você não puder iniciar o GNU/Linux do disco " "rígido,\n" "este floppy será o único meio de restaurar e iniciar o GNU/Linux. Ele contém " "uma \n" "série de feramentas para reparar e restaurar o sistema, que pode ter parado " "por falta de \n" "energia, ou algum erro de digitação, erro de senha, ou qualquer outro " "motivo.\n" "\n" "Quando você clica nesta etapa, você será instado a inserir um disco no drive " "de floppy.\n" "O disco que você inserir deverá estar vazio ou conter dados que você não " "precisa.\n" "Você não precisará reformatá-lo, porque o DrakX irá reescrever o disco " "inteiro." #: ../../help.pm_.c:277 msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "A esse ponto, você precisa escolher onde você quer instalar o seu sistema\n" "Mandrake Linux no seu disco rígido. Se estiver vazio ou se um sistema\n" "operacional existente usa todo o espaço disponível, você terá que\n" "particioná-lo. Basicamente, particionar um disco rígido consiste em\n" "dividí-lo logicamente para criar espaço para o seu novo sistema Mandrake " "Linux.\n" "\n" "Como os efeitos de um processo de particionamento são normalmente\n" "irreversíveis, o particionamento pode ser intimidante e estressante se\n" "você for um usuário inexperiente.\n" "Esse ajudante simplifica o procceso. Antes de começar, favor consultar o " "manual\n" "e não se apressar.\n" "\n" "\n" "Você precisa de no mínimo duas partições. Uma para o sistema opercional em e " "a\n" "outra para a memória virtual (também chamada de Swap).\n" "\n" "\n" "Se as partições já tiverem sido definidas (por uma instalação prévia ou " "através\n" "de outra ferramenta particionadora), você precisa apenas escolher aquelas a " "usar\n" "para instalar o seu sistema Linux.\n" "\n" "\n" "Se as partições não tiverem sido definidas ainda, você precisa criá-las.\n" "Para fazer isso, use o ajudante disponível acima. Dependendo da\n" "configuração do seu disco rígido, várias soluções podem estar disponíveis:\n" "\n" "* Usar partição existente: o ajudante detectado uma ous mais partições Linux " "já existentes no seu disco rígido. Se\n" " você quiser mantê-las, escolha essa opção. \n" "\n" "\n" "* Apagar todo o disco: se você quiser deletar todos os dados e todas as " "partições existentes no disco rígidos e substituí-las pelo seu novo sistema " "Mandrake Linux, você pode escolher essa opção. Tenha cuidado com essa " "opção,\n" " você não pode reverter sua escolha após a confirmação.\n" "\n" "\n" "* Usar o espaço livre na partição Windows: se o Microsoft Windows estiver " "instalado no seu disco rígido e tomar\n" " todo o espaço disponível, você tem que criar espaço livre para o Linux. " "Para fazer isso, você pode deletar a sua\n" " partição Microsoft Windows e dados (ver \"Apagar todo o disco\" ou " "soluções \"Modo Expert\") ou redimensionar\n" " a sua partição Microsoft Windows. O redimensionamento pode ser feito sem a " "perda de dados. Essa solução é\n" " recomendada se você quiser usar o Mandrake Linux e o Microsoft Windows no " "mesmo computador.\n" "\n" "\n" " Antes de escolher essa solução, favor entender que o tamanho de sua " "partição\n" " Microsoft Windows será menor do que agora. Isso significa que você irá\n" "ter menos espaço livre no Microsoft\n" " Windows para guardar os seus dados ou instalar novos programas.\n" "\n" "\n" "* Modo Expert: se você quiser particionar manualmente o seu disco rígido, " "escolha essa opção. Tenha cuidado\n" " antes de escolhe-la. Ela é muito poderosa, mas muito perigosa. Você pode " "perder todos os seus dados\n" " facilmente. Então não escolha essa solução a não ser que saiba o que faz." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "Aqui estamos, a instalação agora está completa e o seu GNU/Linux está " "pronto\n" "para usar. Clique em \"OK\"para reiniciar o sistema. Você pode iniciar o " "GNU/Linux \n" "ou o Windows, o que você preferir (se estiver em dual-boot), assim que o " "computador\n" "tiver reiniciado.\n" "\n" "O botão \"Avançado\" (em modo expert) mostra mais dois botões:\n" "\n" " * \"gerar disco de autoinstalação\": para criar um disco de instalação que " "irá\n" "automaticamente fazer uma instalação completa sem a ajuda de um operador,\n" "semelhante à instalação que você acabou de fazer.\n" "\n" " Note que duas opções diferentes estão disponíveis depois de clicar o " "botão:\n" "\n" " * \"Replay\". É uma instalação parcialmente automática, porque a seção " "de\n" "particionamento (somente esta) permanece interativa.\n" "\n" " * \"Automatizada\". Completamente automatizada: o disco rígido é " "completamente \n" "reescrito, e todos os dados anteriores são perdidos.\n" "\n" " Esta funcionalidade é muito adequada quando se deseja instalar o sistema\n" "em um grande número de máquinas semelhantes. Veja a seção de autoinstalação\n" "do nosso website. * \"Save packages selection\"(*) : salva a seleção de " "pacotes como feita anteriormente.\n" "Depois, quando fizer outra instalação, insira o floppy no drive e rode a " "instalação, indo\n" "para a tela de ajuda pela tecla F1 e escolhendo >>linux defcfg=\"floppy" "\"<<.\n" "\n" "(*) Você necessitará de um disco floppy formatado em FAT (para criar um no " "GNU/Linux\n" "digite \"mformat a:\")" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "Qualquer partição que acabou de ser criada deve ser\n" "formatada para o uso (formatar significa criar um sistema de arquivos).\n" "\n" "Agora, você pode reformatar algumas partições existentes para apagar os " "dados\n" "contidos nelas. Se você deseja fazer isso, favor também selecionar quais\n" "partições você deseja formatar\n" "\n" "Favor notar que não é necessário reformatar todas as partições já " "existentes.\n" "Você deve reformatar as partições contendo o sistema operacional (tal como\n" "\"/\",\"/usr\" ou \"/var\"), mas você não tem que reformatar as partições " "contendo\n" "dados que você deseja manter (normalmente /home).\n" "\n" "Favor tenha cuidado ao selecionar as partições, após formatá-las,\n" "todos os dados serão apagados e não pode ser recuperados.\n" "\n" "Cliquem em \"OK\" quando estiver pronto para formatar as partições.\n" "\n" "Clique em \"Cancelar\" se você desejar escolher outras partições para " "instalar\n" "o seu novo sistema operacional Mandrake Linux." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "Seu novo sistema operacional Mandrake Linux está sendo instalado\n" "Essa operação deve demorar algumas minutos (isso depende do tamanho que\n" "você escolheu para instalar e a velocidade do seu computador).\n" "\n" "Por favor seja paciente." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "Antes de continuar você deve ler com atenção os termos da Licensa. Ela " "cobre\n" "o Mandrake Linux inteiro, e se você não concorda com todos os termos, clique " "no \n" "botão \"Recusar\" que irá imediatamente sair da instalação. Para continuar " "na instalação,\n" "clique em \"Aceitar\"." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "Neste ponto é necessário escolher o nível de segurança desejado para a " "máquina.\n" "Via de regra, quanto mais exposta a máquina está, e quanto mais dados " "cruciais estão\n" "guardados nela, maior deve ser o nível de segurança. Contudo, os níveis mais " "altos de \n" "segurança são obtidos às expensas da facilidade de uso. Consulte o capítulo " "MSEC\n" " do ``Manual de Referência'' para conseguir mais informações sobre o " "significado destes\n" "níveis de segurança.\n" "\n" "Se você não souber o que escolher, siga os defaults." #: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Agora você precisa escolher qual(is)\n" "partição(ões) utilizar para instalar o seu novo sistema Mandrake Linux. Se " "aspartições\n" "já estiverem definidas (através de uma instalação anterior do GNU/Linux ou " "outra\n" "ferramenta particionadora), você pode utilizá-las. Caso contrário, as\n" "partições devem ser definidas.\n" "\n" "Para criar partições, você deve primeiro selecionar um disco rígido. Você\n" "pode selecionar o disco clicando em \"hda\" para o primeiro drive IDE,\"hdb" "\" para\n" "o segundo ou \"sda\" para o primeiro drive SCSI e assim por diante.\n" "\n" "Para particionar o disco selecionado, você pode usar as seguintes opções:\n" "\n" " * Limpar tudo: essa opção deletará todas as partições disponíveis do " "disco rígido selecionado.\n" "\n" " * Auto alocar: essa opção lhe permite criar automaticamente partições " "Ext2 e swap no espaço livre do seu\n" " disco rígido.\n" "\n" " * Resgatar tabela de partição: se sua tabela de partição estiver " "danificada, você pode tentar recuperá-la usando\n" " essa opção. Tenha cuidado e lembre-se que ela pode falhar.\n" "\n" " * Desfazer: você pode usar essa opção para cancelar suas alterações.\n" "\n" " * Recarregar: você pode usar essa opção se você desejar desfazer todas as " "suas alterações e recomeçar de novo\n" "\n" " * Ajudante: se você desejar utilizar um ajudante para particionar o seu " "disco rígido, você pode usar essa opção.\n" " É recomendada caso não tenha conhecimento sobre particionamento.\n" "\n" " * Restaurar do disquete: se você salvou a sua tabela da partição em um " "disquete em um instalação anterior, você\n" " pode recuperá-la com essa opção.\n" "\n" " * Salvar em disquete: se você quiser salvar sua tabela de partição em um " "disquete para pode recuperá-la,\n" " você pode usar essa opção. É altamente recomendado utilizá-la.\n" "\n" " * Salvar: quando você terminar de particionar o seu disco rígido, use " "essa opção para salvar as alterações.\n" "\n" "Nota: você pode utilizar qualquer opção usando o teclado: navegue entre as " "partições usando Tab e as setas para cima/baixo.\n" "\n" "Quando a partiçõ estiver selecionada, você pode usar:\n" "\n" " * Ctrl-c para criar uma nova partição (quando uma vazia estiver " "selecionada)\n" " * Ctrl-d para deletar uma partição\n" "\n" " * Ctrl-m para especificar um ponto de montagemSe você está " "instalando em uma Máquina PPC, você vai querer criar uma pequena partição " "'bootstrap' HFS de ao menos 1MB para\n" "usar com o gerenciador de boot yaboot. Se você quiser criar uma partição um " "pouco maior, digamos 50MB, você pode usar o espaço \n" "para guardar um kernel extra e uma imagem ramdisk para emergências." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Mais de uma partição Microsoft Windows foi detectada\n" "em seu disco rígido. Favor escolher a que você quer redimensionar para\n" "instalar o seu novo sistema operacional Mandrake Linux.\n" "\n" "Nota: cada partição é listada da seguinte forma: \"Nome Linux\", \"Nome\n" "Windows\" \"Capacidade\".\n" "\n" "\"Nome Linux\" é codificado da seguinte maneira: \"tipo do disco rígido\", " "\"número do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n" "\n" "\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n" "se ele for um disco rígido SCSI.\n" "\n" "\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com " "discos rígidos IDE:\n" "\n" " * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n" "\n" " * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n" "\n" " * \"c\" significa \"disco rígido mestre na controladora IDE secundária" "\", \n" " * \"d\" significa \"disco rígido escravo na controladora IDE secundária" "\". \n" "\n" "Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" " "significa \"disco rígido secundário\", etc...\n" "\n" "\"Nome Windows\" é a letra do seu disco rígido no Windows (o primeirodisco\n" "ou partição é chamado \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "Por favor seja paciente. Essa operação pode demorar vários minutos." #: ../../help.pm_.c:547 #, fuzzy msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" "dRakX agora precisa saber se você deseja fazer uma isntalação default\n" " (\"recomendada\") ou se você deseja ter maior controle sobre o processo " "(\"expert\").\n" "Você também tem a escolha de fazer uma nova instalação ou uma atualização " "de\n" "um sistema MandrakeLinux existente antes.\n" "\n" " * \"Instalar\" Limpa completamente o sistema antigo. Na verdade, dependendo " "do\n" "que existia antes, você ainda pode conseguir manter partições antigas sem\n" "modificações.\n" "\n" " * \"Atualização\" Esta classe de instalação permite simpelsmente atualizar " "os\n" "pacotes instalados no seu sistema MandrakeLinux. Ele mantém as atuais " "partições\n" "e os arquivos de usuário. Todos os outros passos da isntalação continuam " "disponíveis\n" "em comparação com a instalação primária.\n" "\n" " * \"Somente autalização de pacotes\" Esta nova classe de instalação " "permite\n" "atualizar um sistema Mandrake Linux existente mantendo todas as " "configurações do\n" "sistema intocadas. Adicionar novos pacotes à instalação atual também é " "possível.\n" "\n" "Dependendo do seu conhecimento do GNU/Linux, selecione uma das seguintes\n" "opções: * Recomendada: escolha esta se você nunca instalou um sistema " "operacional\n" "GNU/Linux antes. A instalação será bem simples e você só terá que " "responder \n" "umas poucas perguntas.\n" "\n" "* Expert: se você tem um bom conhecimento sobre o GNU/Linux, você pode " "escolher essa classe. Como em \n" " na classe \"Personalizado\", você poderá escolher o uso primário(estação, " "servidor, desenvolvimento)\n" " Tenha muito cuidado antes de escolher essa classe. Você poderá fazer uma " "instalação bastante personalizada.\n" " Responda a algumas questões que podem ser bem difíceis se você não tiver " "conhecimento sobre GNU/Linux.\n" "Então, só escolha essa classe se souber o que está fazendo." #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" "Normalmente o DrakX esoclhe o teclado certo para você, (dependendo da " "linguagem\n" "qe você escolheu) e você nem verá este passo. Contudo, você pode possuir um " "teclado\n" "que não corresponde à linguagem que você escolheu: se você for um suíço, " "porém falante\n" "de inglês, você pode preferir continuar tendo um teclado suíço. Ou se você " "fala inglês mas\n" "mora no Quebec, você pode estar na mesma situação. Em ambos os casos, você " "deverá \n" "voltar a este passo na instalação e escolher o teclado apropriado da lista.\n" "\n" "Clique em \"Mais\" para ver uma lista completa de teclados disponíveis." #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" "Por favor, escolha a sua língua preferida para a instalação e uso do " "sistema.\n" "\n" "Clicando em \"Avançado\" você poderá selecionar outras línguas para serem " "instaladas\n" "no seu sistema. Selecionar outras línguas irá também instalar os arquivos " "específicos\n" "para documentação e aplicativos. Por exemplo, se você pretende hospedar " "usuários\n" "espanhóis na sua máquina, selecione Inglês como língua principal na árvore " "de\n" " viisualização e na seção avançada clique na estrela cinza correspondente a " "\"Espanhol|\n" "Espanha\".\n" "\n" "Note que múltiplas línguas podem ser instaladas. Uma vez que você " "selecionou \n" "quaisquer adicionais, clique em \"OK\" para continuar." #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" "Por default, o DrakX assume que você tem um mouse de dois botões, e irá setá-" "lo para\n" "emulação do terceiro botão. O DrakX saberá automaticamente se é PS/2, serial " "ou USB.\n" "\n" "Se você deseja especificar um tipo diferente de mouse, selecione o tipo da " "lista\n" "\n" "Se você escolher um mouse diferente do default você será apresentado a uma " "tela de teste de mouse.\n" "Use os botões e a roda para verificar se as configurações estão boas. Se o " "mouse \n" "não estiver funcionando bem, pressione a barra de espaço ou RETORNO para " "\"Cancelar\"\n" "e escolher de novo." #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Favor selecionar a porta correta. Por exemplo, a porta COM1\n" "no MS Windows é chamada ttyS0 no GNU/Linux." #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "Esta é a principal opção para a segurança do seu sistema GNU/Linux: você\n" "deverá digitar a senha de \"root\". \"root\" é o administrador do sistema, e " "é o único\n" "autorizado a fazer atualizações, adicionar usuários e mudar configurações " "gerais\n" "do computador. Em suma: \"root\" pode tudo! Por isso você deve escolher uma " "senha\n" "dicífil de adivinhar - o DrakX irá avisá-lo se for muito fácil. Você pode " "também escolher\n" "não entrar uma senha, mas nós desaconselhamos fortemente esta opção. Não " "pense que\n" "por ter inicado o computador em GNU/Linux você está a salvo de problemas. " "\"root\"\n" "pode contornar todas as limitações do sistema e desavisadamente apagar " "todos\n" "os dados de uma partição, por exemplo. É muito importante que a senha de " "\"root\"\n" "seja difícil.\n" "\n" "A senha deve ser um mistura de caracteres alfanuméricos de pelo menos 8 " "caracteres\n" "de extensão. Nunca escreva a senha \"root\" num papel - isso torna o sistema " "vulnerável.\n" "\n" "Porém, nào faça também uma senha muito complicada e longa, porque você " "deve \n" "ser capaz de relembrá-la sem muito esforço.\n" "\n" "Asenha nào será mostrada na tela enquanto você digita. Portanto você deverá " "digitar a \n" "senha duas vezes para reduzir a chance de erro. Se ocorrer de você digitar o " "mesmo \n" "erro duas vezes, você deverá fazer o primeiro login no sistema com esta " "senha \"errada\".\n" "\n" "Em mod expert você será questionado se se conectará a um servidor de\n" " autenticação, como NIS ou LDAP.\n" "\n" "Se sua rede usa o protocolo LDAP (ou NIS) selecione \"LDAP\" (ou \"NIS\") " "como\n" "autenticação. Se você não sabe, pergunte ao seu administrador de rede.\n" "\n" "Se seu computador não está conectado a uma rede administrada, você deverá\n" "esoclher \"Local Files\" para autenticação." #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" "O LILO e o Grub são gerenciadores de iniciação do GNU/Linux. Este estágio " "via de regra\n" "é totalmente automatizado. De fato, o DrakX analisa o setor de boot do disco " "rígido e\n" "age de acordo com o que encontra ali.:\n" "\n" " * Se um setor de boot windows é encontrado, ele substitui com um setor de " "boot\n" "LILO ou Grub. Portanto, você poderá iniciar o GNU/Linux ou outro sistema " "operacional;\n" "\n" " * Se um setor LILO ou Grub é encontrado, ele será substituído por outro " "novo;\n" "\n" "Em dúvida, o DrakX irá mostrar um diálogo com várias opções.\n" "\n" " * \"Gerenciador de iniciação a ser usado\": você tem três escolhas:\n" "\n" " *\"GRUB\": se vocvê prefere o GRUB (menu em modo texto).\n" "\n" " *\"LILO com menu em modo gráfico\" se você prefere o LILO em modo " "gráfico.\n" "\n" " *\"LILO com menu em mod texto\": se você prefere o LILO em modo texto.\n" "\n" " * \"Dispositivo de iniciação\": Na maioria dos casos você nào irá mudar o " "default\n" "(\"/dev/hda\"), mas se você preferir, o carregador de iniciação poderá ser " "instalado\n" "num segundo disco rígido (\"dev/hdb\"), ou mesmo num flopy (\"/dev/fd0\").\n" "\n" " * \"Tempo antes de iniciar o sistema default\": antes de iniciar o " "computador, este\n" "é o tempo dado ao usuaio para escolher o sistema a ser iniciado.\n" "\n" "!! Repare que se você escolher não instalar um gerenciador de iniciação " "(selecionando\n" "\"Cancelar\" neste ponto) você deve se certificar de que você tem um jeito " "de iniciar o\n" "seu sistema Mandrake Linux! Também, tenha certeza de que você sabe o que " "está \n" "fazendo quando mudar qualquer default destes.!!\n" "\n" "Clicando em \"Avançado\" neste diálogo, aparecerão várias opções " "avançadas, \n" "resevadas ao usuário experiente.\n" "\n" "Depois de ter configurado todos os parâmetros do gerenciador de iniciação na " "máquina,\n" "você verá as opções de iniciação disponíveis no momento da iniciação.\n" "\n" "Se houver outro sistema operacional instalado na máquina, " "ser'automaticamente\n" "adicionado ao menu de iniciação. Portanto você poderá depois, ajustar as " "opções \n" "existentes. Selecione uma entrada e clique \"Modificar\" para modificá-la ou " "removê-la,\n" "\"Adicionar\" cria uma nova entrada, e \"Feito\" vai para o próximo passo da " "instalação." #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "LILO (o LInux LOader) e Grub são gerenciadors de boot: ele são capazes de\n" "de inicializar tanto no GNU/Linux quanto qualquer outro sistema\n" "operacional instalado. Normalmente, esses sistemas são detectados e\n" "instalados corretamente. Se esse não for o caso, você pode adicionar\n" "entradas manualmente nessa tela. Cuidado ao escolher os parâmetros " "corretos.\n" "\n" "\n" "Você pode também não dar acesso a esses sistemas operacionais para\n" "ninguém, na qual você pode deletar as entradas correspondentes. Mas nesse\n" "caso, você precisará de um disco de inicialização para poder utilizá-los!" #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "Você precisa indicar onde você deseja\n" "guardar a informação necessária para inicializar o GNU/Linux.\n" "\n" "\n" "A não ser que você saiba exatamente o que está fazendo, escolha \"Primeiro\n" "setor do drive (MBR)\"." #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" #: ../../help.pm_.c:759 #, fuzzy msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" "DrakX tentará localizar adaptadores PCI SCSI. Se DrakX encontrar\n" "um adaptador SCSI e souber qual driver utilizar, ele será instalado\n" "automaticamente\n" "\n" "\n" "Se você não possuir adaptadores SCSI, um adaptador ISA SCSI ou PCI SCSI que\n" "DrakX não reconhece, você será perguntado se algum adaptador SCSI existe em " "seu\n" "sistema. Se não existir adaptadores, você pode clicar em \"Não\". Se você " "clicar em\n" "\"Sim\", uma lista de drivers aparecerá para que você possa escolher o seu\n" "adaptador.\n" "\n" "\n" "Se você tem que especificar manualmente o seu adaptador, DrakX perguntará " "se\n" "você quer especificar opções para ele. Você pode deixar que o DrakX examine " "o hardware\n" "para descobrir as opções. Isso normalmente funciona bem.\n" "\n" "\n" "Se não, você precisará prover as opções para o driver. Favor olhar o Guia do " "Usuário\n" "(capítulo 3, seção \"Coletando informações sobre seu hardware) para dicas " "sobre\n" "como descobrir essas informações na documentação do hardware, no Web site\n" "do fabricante (se você tiver acesso à Internet) ou no Microsoft Windows\n" "(se você tivé-lo no seu sistema)." #: ../../help.pm_.c:781 #, fuzzy msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "Você pode adicionar entradas adicionais no yaboot, tanto para outros " "sistemas operacionais,\n" "kernels alternativos, ou imagem de boot de emergência.\n" "\n" "\n" "Para outros SO - a entrada consiste apenas de um nome e da partição root.\n" "\n" "\n" "Para Linux, existem algumas opções possíveis: \n" "\n" "\n" " - Label: Isso é simplesmente o nome que será necessário pare entrar no " "sistema \n" "através do yaboot.\n" "\n" "\n" " - Image: Isso seria o nome do kernel a ser usado. Tipicamente vmlinux ou " "uma\n" "variação de vmlinux com uma extensão.\n" "\n" "\n" " - Root: O dispositivo padrão ou '/' da sua instalação Linux.\n" "\n" "\n" " \n" " - Append: No hardware Apple, a opção append (anexar) é normalmente usada " "para\n" "auxiliar na inicializando do hardware de vídeo, ou para permitir a emulação " "do botão\n" "do mouse pelo teclado, devido a falta do segundo e terceiro botão no mouse " "Apple.\n" "A seguir estão alguns exemplos:\n" "\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" "\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" "\n" "\n" " \n" " - Initrd: Essa opção pode ser usada tanto para carregar módulos adicionais " "antes que\n" "o dispositivo de boot esteja disponível, ou para carregar uma imagem ramdisk " "de emergência.\n" "\n" "\n" " - Initrd-size: O tamanho padrão do ramdisk é 4096 bytes. Se você precisar " "alocar\n" "um ramdisk maior, essa opção pode ser usada.\n" "\n" "\n" " - Read-write: Normalmente a partição 'root' é inicialmente carregada como " "apenas-leitura,\n" "para permitir uma checagem do sistema antes de ativá-lo. Você pode modificar " "essa opção aqui.\n" "\n" "\n" " - NoVideo: Se o hardware de vídeo Apple mostrar ser excepcionalmente " "problemática, você pode\n" "selecionar esse opção para entrar no modo 'semvídeo', com suporte nativo ao " "framebuffer.\n" "\n" "\n" " - Default: Selecione essa entrada como sendo a opção padrão Linux, " "bastando pressionar\n" "ENTER no prompt do yaboot. Essa entrada também aparecerá marcada com um '*', " "se você\n" "pressionar TAB para ver as opções de boot." #: ../../help.pm_.c:828 #, fuzzy msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot é o inicializador para hardware NewWorld MacIntosh. Ele é capaz\n" "de inicializar tanto o GNU/Linux, MacOS ou MacOSX, se existente no seu\n" "computador. Normalmente, esses outros sistemas operacionais são detectados\n" "corretamente e instalados. Se esse não for o seu caso, você pode adicionar\n" "entradas manualmente nesta tela. Escolha cuidadosamente os parâmetros.\n" "\n" "\n" "A principais opções do Yaboot são:\n" "\n" "\n" " - Mensagem Inicial: uma pequena mensagem de texto que aparece antes do\n" "prompt do boot.\n" "\n" "\n" " - Dispositivo de boot: Indica onde você quer colocar a informação " "necessária \n" "para entrar no GNU/Linux. Geralmente, você terá que configurar uma partição " "bootstrap \n" "para manter essa informação.\n" "\n" "\n" " - Tempo de boot do Kernel: esse tempo é similar ao tempo de boot do " "LILO. Após \n" "selecionar Linux, você terá 0.1 segundo antes do kernel padrão ser " "selecionado.\n" "\n" "\n" " - Permitir CD Boot?: Marcar essa opção lhe permitirá escolher 'C' para CD " "no\n" "primeiro prompt do boot.\n" "\n" "\n" " - Permitir OF Boot?: Marcar essa opção lhe permitirá escolher 'N' para " "Firmware\n" "Aberto no primeiro prompt de boot.\n" "\n" "\n" " - SO padrão: você pode selecionar qual SO será iniciado por padrão quando " "o tempo \n" "do Firmware Aberto expirar." #: ../../help.pm_.c:860 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" #: ../../help.pm_.c:891 #, fuzzy msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Escolha o disco rígido que você quer apagar para instalar\n" "sua partição Mandrake Linux. Tenha cuidado, pois todos os dados existentes " "serão\n" "perdidos e não poderão ser recuperados." #: ../../help.pm_.c:896 #, fuzzy msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Clique em \"OK\" se você quiser apagar todos os\n" "dados e partição existentes nesse disco rígido. Tenha cuidado, pois após " "clicar\n" "em \"OK\", você não será capaz de recuperar os dados/partições existentes " "nesse\n" "disco rígido, incluindo quaisquer dados do Windows.\n" "\n" "\n" "Clique em \"Cancelar\" para cancelar essa operação sem perder qualquer dado\n" "e partição presente nesse disco rígido." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Você selecionou o(s) seguinte(s) serviço(s): %s\n" "\n" "\n" "Esses servidores são ativados por padrão. Eles não possuem nenhuma falha\n" "de segurança conhecida, mas pode existir uma nova. Nesse caso, você " "deveatualizá-lo\n" "o mais cedo possível.\n" "\n" "\n" "Você realmente quer instalar esses servidores?\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "Não pode usar broadcast sem domínio NIS" #: ../../install_any.pm_.c:870 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Insira um disquete FAT formatado no drive %s" #: ../../install_any.pm_.c:874 msgid "This floppy is not FAT formatted" msgstr "Esse disquete não está formatado como FAT" #: ../../install_any.pm_.c:886 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Para usar a seleção salva de pacotes, entre na instalação com ``linux " "defcfg=floppy''" #: ../../install_any.pm_.c:909 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "Erro lendo arquivo %s" #: ../../install_any.pm_.c:1031 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos " "sistema de arquivos. Favor checar seu hardware para a causa desse problema" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Algum hardware no seu computador precisa de drivers ``proprietário'' \n" "para funcionar. Você pode encontrar informações sobre eles em: %s" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Você deve ter uma partição root.\n" "Para isso, crie um partição (ou click em uma existen).\n" "Então escolha ação ``Ponto de montagem'' e coloque como `/'" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "Você tem que ter uma partição swap" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Você não possui uma partição swap\n" "\n" "Continuar mesmo assim?" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:169 #, fuzzy msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Você tem que ter uma partição swap" #: ../../install_interactive.pm_.c:92 msgid "Use free space" msgstr "Usar espaço livre" #: ../../install_interactive.pm_.c:94 msgid "Not enough free space to allocate new partitions" msgstr "Sem espaço livre suficiente para alocar as novas partições" #: ../../install_interactive.pm_.c:102 msgid "Use existing partitions" msgstr "Use partição existindo" #: ../../install_interactive.pm_.c:104 msgid "There is no existing partition to use" msgstr "Não existe nenhuma tabela de partição para usar" #: ../../install_interactive.pm_.c:111 msgid "Use the Windows partition for loopback" msgstr "Usar a partição Windows para loopback" #: ../../install_interactive.pm_.c:114 msgid "Which partition do you want to use for Linux4Win?" msgstr "Qual partição você quer usar para o Linux4Win?" #: ../../install_interactive.pm_.c:116 msgid "Choose the sizes" msgstr "Escolha os tamanhos" #: ../../install_interactive.pm_.c:117 msgid "Root partition size in MB: " msgstr "Tamanho da partição root em MB:" #: ../../install_interactive.pm_.c:118 msgid "Swap partition size in MB: " msgstr "Tamanho da partição swap em MB: " #: ../../install_interactive.pm_.c:128 msgid "Use the free space on the Windows partition" msgstr "Usar o espaço livre da partição Windows" #: ../../install_interactive.pm_.c:131 msgid "Which partition do you want to resize?" msgstr "Qual partição você quer redimensionar?" #: ../../install_interactive.pm_.c:133 msgid "Resizing Windows partition" msgstr "Computando limites do sistema de arquivo do Windows" #: ../../install_interactive.pm_.c:136 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "O redimensionar FAT é incapaz de manipular sua partição, \n" "o seguinte erro ocorreu: %s" #: ../../install_interactive.pm_.c:139 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Sua partição Windows está muito fragmentada, favor rodar primeiro o " "``defrag''" #: ../../install_interactive.pm_.c:140 #, fuzzy msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "ATENÇÃO!\n" "\n" "Drakx precisa agorar redimensionar sua partição Windows. Tenha cuidado:\n" "essa operação é perigosa. Se você não tiver feito ainda, você deve rodar o\n" "scandisk no Windows (e opcionalmente rodar o defrag) nesta partição,\n" "então reiniciar a instalação. Você também deveria fazer backup de seus\n" "dados. Quando tiver certeza, pressione Ok." #: ../../install_interactive.pm_.c:150 msgid "Which size do you want to keep for Windows on" msgstr "Quanto de espaço você quer deixar para o windows em" #: ../../install_interactive.pm_.c:151 #, c-format msgid "partition %s" msgstr "partição %s" #: ../../install_interactive.pm_.c:158 #, c-format msgid "FAT resizing failed: %s" msgstr "Falha no redimensionamento FAT: %s" #: ../../install_interactive.pm_.c:173 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "Não existem partições FAT para redimensionar ou para usar como loopback (ou " "não existe espaço suficiente)" #: ../../install_interactive.pm_.c:179 msgid "Erase entire disk" msgstr "Apague disco inteiro" #: ../../install_interactive.pm_.c:179 msgid "Remove Windows(TM)" msgstr "Remover Windows(TM)" #: ../../install_interactive.pm_.c:182 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Você tem mais de um disco rígido, em qual deles você quer instalar o linux?" #: ../../install_interactive.pm_.c:185 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "Todas as partições que existem e todos os dados serão perdidos em disco %s" #: ../../install_interactive.pm_.c:193 msgid "Custom disk partitioning" msgstr "Particionamento de disco personalizada" #: ../../install_interactive.pm_.c:197 msgid "Use fdisk" msgstr "Usar fdisk" #: ../../install_interactive.pm_.c:200 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Você pode agorar particionar %s.\n" "Quando terminar, não esqueça de salvar usando `w'" #: ../../install_interactive.pm_.c:229 msgid "You don't have enough free space on your Windows partition" msgstr "Você não tem espaço livre na sua partição Windows" #: ../../install_interactive.pm_.c:245 msgid "I can't find any room for installing" msgstr "Eu não achei espaço para instalação" #: ../../install_interactive.pm_.c:248 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "O particionador DrakX encontrou as soluções seguintes:" #: ../../install_interactive.pm_.c:252 #, c-format msgid "Partitioning failed: %s" msgstr "O particionamento falhou: %s" #: ../../install_interactive.pm_.c:262 msgid "Bringing up the network" msgstr "Trazendo (acessando) a rede" #: ../../install_interactive.pm_.c:267 msgid "Bringing down the network" msgstr "Fechando (desconectando) a rede" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Um erro ocorreu, mas eu não sei como lidar com ele.\n" "Continue a seu próprio risco." #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "Ponto de montagem %s duplicado" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Alguns pacotes importantes não foram instalados corretamente.\n" "O seu drive de cdrom ou o seu cdrom está defeituoso.\n" "Cheque o cdrom em um computador instalado usando \"rpm -qpl Mandarke/RPMS/*." "rpm\"\n" #: ../../install_steps.pm_.c:452 #, c-format msgid "Welcome to %s" msgstr "Bem-vindo à %s" #: ../../install_steps.pm_.c:542 ../../install_steps.pm_.c:781 msgid "No floppy drive available" msgstr "Nenhum drive de disquete disponível" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "Entrando no passo `%s'\n" #: ../../install_steps_gtk.pm_.c:150 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Seu sistema está com poucos recursos. Você pode ter algum problema na\n" "instalação do Mandrake Linux. Se isso ocorrer, você pode tentar instalar " "usando o\n" "modo texto. Para isso, aperte `F1' na tela de inicialização e escreva `text'." #: ../../install_steps_gtk.pm_.c:161 ../../install_steps_interactive.pm_.c:231 msgid "Install Class" msgstr "Classe de Instalação" #: ../../install_steps_gtk.pm_.c:164 #, fuzzy msgid "Please choose one of the following classes of installation:" msgstr "Por favor escolhe uma das seguintes classes de instalação:" #: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:676 msgid "Package Group Selection" msgstr "Seleção de Grupo de Pacotes" #: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:691 msgid "Individual package selection" msgstr "Seleção individual de pacotes" #: ../../install_steps_gtk.pm_.c:293 ../../install_steps_interactive.pm_.c:614 #, c-format msgid "Total size: %d / %d MB" msgstr "Tamanho total: %d / %d MB" #: ../../install_steps_gtk.pm_.c:335 msgid "Bad package" msgstr "Pacote defeituoso" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Name: %s\n" msgstr "Nome: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Version: %s\n" msgstr "Versão: %s\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Size: %d KB\n" msgstr "Tamanho: %d KB\n" #: ../../install_steps_gtk.pm_.c:339 #, c-format msgid "Importance: %s\n" msgstr "Importância: %s\n" #: ../../install_steps_gtk.pm_.c:361 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Você não pode selecionar esse pacote pois não existe espaço livre para " "instalá-lo" #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be installed" msgstr "Os seguintes pacotes serão instalados" #: ../../install_steps_gtk.pm_.c:367 msgid "The following packages are going to be removed" msgstr "Os seguintes pacotes serão removidos" #: ../../install_steps_gtk.pm_.c:379 msgid "You can't select/unselect this package" msgstr "Você não pode selecionar/deselecionar esse pacote" #: ../../install_steps_gtk.pm_.c:391 msgid "This is a mandatory package, it can't be unselected" msgstr "Esse é um pacote obrigatório, não pode ser deselecionado" #: ../../install_steps_gtk.pm_.c:393 msgid "You can't unselect this package. It is already installed" msgstr "Você não pode deselecionar esse pacote. Ele já está instalado" #: ../../install_steps_gtk.pm_.c:396 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Esse pacote tem que ser atualizado\n" "Tem certeza que você quer deselecioná-lo?" #: ../../install_steps_gtk.pm_.c:399 msgid "You can't unselect this package. It must be upgraded" msgstr "Você não pode deselecionar essa pacote. Ele tem que ser atualizado" #: ../../install_steps_gtk.pm_.c:404 msgid "Show automatically selected packages" msgstr "Mostra automaticamente os pacotes selecionados" #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #: ../../standalone/drakbackup_.c:4259 msgid "Install" msgstr "Instalar" #: ../../install_steps_gtk.pm_.c:408 #, fuzzy msgid "Load/Save on floppy" msgstr "Salvar em disquete" #: ../../install_steps_gtk.pm_.c:409 #, fuzzy msgid "Updating package selection" msgstr "Salvar seleção de pacotes" #: ../../install_steps_gtk.pm_.c:414 #, fuzzy msgid "Minimal install" msgstr "Sair da instalação" #: ../../install_steps_gtk.pm_.c:429 ../../install_steps_interactive.pm_.c:522 msgid "Choose the packages you want to install" msgstr "Escolha os pacotes que você quer instalar" #: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:760 msgid "Installing" msgstr "Instalando" #: ../../install_steps_gtk.pm_.c:451 msgid "Estimating" msgstr "Estimando" #: ../../install_steps_gtk.pm_.c:458 msgid "Time remaining " msgstr "Tempo restante " #: ../../install_steps_gtk.pm_.c:470 msgid "Please wait, preparing installation..." msgstr "Por favor aguarde, preparando instalação" #: ../../install_steps_gtk.pm_.c:554 #, c-format msgid "%d packages" msgstr "%d pacotes" #: ../../install_steps_gtk.pm_.c:559 #, c-format msgid "Installing package %s" msgstr "Instalando pacote %s" #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:784 #: ../../standalone/drakautoinst_.c:202 msgid "Accept" msgstr "Aceitar" #: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:784 msgid "Refuse" msgstr "Recusar" #: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:785 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Mude o seu Cd-Rom!\n" "\n" "Favor inserir o Cd-Rom rotulado \"%s\" no seu drive e aperte em Ok quando " "estiver pronto.\n" "Se você não o tiver, aperte em Cancelar para evitar a instalação desse Cd-" "Rom." #: ../../install_steps_gtk.pm_.c:611 ../../install_steps_gtk.pm_.c:615 #: ../../install_steps_interactive.pm_.c:797 #: ../../install_steps_interactive.pm_.c:801 msgid "Go on anyway?" msgstr "Continuar mesmo assim?" #: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:797 msgid "There was an error ordering packages:" msgstr "Houve um erro ordenando os pacotes:" #: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:801 msgid "There was an error installing packages:" msgstr "Houve um erro instalando os pacotes:" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "Ocorreu um erro" #: ../../install_steps_interactive.pm_.c:85 #, fuzzy msgid "Do you really want to leave the installation?" msgstr "Você quer reiniciar a rede" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "Contrato de licença" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:191 msgid "Are you sure you refuse the licence?" msgstr "" #: ../../install_steps_interactive.pm_.c:211 #: ../../install_steps_interactive.pm_.c:1021 #: ../../standalone/keyboarddrake_.c:31 msgid "Keyboard" msgstr "Teclado" #: ../../install_steps_interactive.pm_.c:212 #, fuzzy msgid "Please choose your keyboard layout." msgstr "Favor escolher o layout do seu teclado." #: ../../install_steps_interactive.pm_.c:213 msgid "Here is the full list of keyboards available" msgstr "Aqui está a lista completa de teclados disponíveis" #: ../../install_steps_interactive.pm_.c:231 msgid "Which installation class do you want?" msgstr "Qual classe de instalação você quer?" #: ../../install_steps_interactive.pm_.c:235 msgid "Install/Update" msgstr "Instalar/Atualizar" #: ../../install_steps_interactive.pm_.c:235 msgid "Is this an install or an update?" msgstr "Isso é uma instalação ou atualização?" #: ../../install_steps_interactive.pm_.c:244 msgid "Recommended" msgstr "Recomendado" #: ../../install_steps_interactive.pm_.c:247 #: ../../install_steps_interactive.pm_.c:250 msgid "Expert" msgstr "Expert" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #, fuzzy msgid "Upgrade" msgstr "Atualizar" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #, fuzzy msgid "Upgrade packages only" msgstr "Salvar seleção de pacotes" #: ../../install_steps_interactive.pm_.c:275 #, fuzzy msgid "Please choose the type of your mouse." msgstr "Favor escolher o tipo do seu mouse." #: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:60 msgid "Mouse Port" msgstr "Porta do Mouse" #: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:61 msgid "Please choose on which serial port your mouse is connected to." msgstr "Favor escolher em qual porta serial seu mouse está conectado." #: ../../install_steps_interactive.pm_.c:290 msgid "Buttons emulation" msgstr "Emulação dos botões" #: ../../install_steps_interactive.pm_.c:292 msgid "Button 2 Emulation" msgstr "Emulação dos 2 botões" #: ../../install_steps_interactive.pm_.c:293 msgid "Button 3 Emulation" msgstr "Emulação dos 3 botões" #: ../../install_steps_interactive.pm_.c:314 msgid "Configuring PCMCIA cards..." msgstr "Configurando cartões PCMCIA..." #: ../../install_steps_interactive.pm_.c:314 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring IDE" msgstr "Configurando IDE" #: ../../install_steps_interactive.pm_.c:321 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:338 msgid "No partition available" msgstr "sem partições disponíveis" #: ../../install_steps_interactive.pm_.c:341 msgid "Scanning partitions to find mount points" msgstr "Escanenado partições para encontrar pontos de montagem" #: ../../install_steps_interactive.pm_.c:349 msgid "Choose the mount points" msgstr "Escolha os ponto de montagem" #: ../../install_steps_interactive.pm_.c:379 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../install_steps_interactive.pm_.c:388 #, fuzzy msgid "No root partition found to perform an upgrade" msgstr "Escolha as partições que você quer formatar" #: ../../install_steps_interactive.pm_.c:389 msgid "Root Partition" msgstr "Partição Root" #: ../../install_steps_interactive.pm_.c:390 msgid "What is the root partition (/) of your system?" msgstr "Qual a partição root (/) do seu sistema?" #: ../../install_steps_interactive.pm_.c:404 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Você precisa reiniciar para que as modificações na tabela de partição tenham " "efeito" #: ../../install_steps_interactive.pm_.c:428 msgid "Choose the partitions you want to format" msgstr "Escolha as partições que você quer formatar" #: ../../install_steps_interactive.pm_.c:429 msgid "Check bad blocks?" msgstr "Checar blocos defeituosos?" #: ../../install_steps_interactive.pm_.c:456 msgid "Formatting partitions" msgstr "Formatando partições" #: ../../install_steps_interactive.pm_.c:458 #, c-format msgid "Creating and formatting file %s" msgstr "Criando e formatando arquivo %s" #: ../../install_steps_interactive.pm_.c:463 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm_.c:465 msgid "Not enough swap space to fulfill installation, please add some" msgstr "Sem swap suficiente para completar a instalação, favor adicionar mais" #: ../../install_steps_interactive.pm_.c:472 #, fuzzy msgid "Looking for available packages and rebuilding rpm database..." msgstr "Procurando por pacotes disponíveis" #: ../../install_steps_interactive.pm_.c:473 msgid "Looking for available packages..." msgstr "Procurando por pacotes disponíveis" #: ../../install_steps_interactive.pm_.c:476 #, fuzzy msgid "Looking at packages already installed..." msgstr "Você não pode deselecionar esse pacote. Ele já está instalado" #: ../../install_steps_interactive.pm_.c:480 msgid "Finding packages to upgrade..." msgstr "Procurando pacotes à atualizar" #: ../../install_steps_interactive.pm_.c:498 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Seu sistema não tem espaço suficiente para instalção ou atualização (%d > %d)" #: ../../install_steps_interactive.pm_.c:534 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm_.c:536 #, fuzzy msgid "Load from floppy" msgstr "Restaurar do disquete" #: ../../install_steps_interactive.pm_.c:536 msgid "Save on floppy" msgstr "Salvar em disquete" #: ../../install_steps_interactive.pm_.c:540 #, fuzzy msgid "Loading from floppy" msgstr "Restaurar do disquete" #: ../../install_steps_interactive.pm_.c:540 #, fuzzy msgid "Package selection" msgstr "Seleção de Grupo de Pacotes" #: ../../install_steps_interactive.pm_.c:545 #, fuzzy msgid "Insert a floppy containing package selection" msgstr "Insira um disquete no drive %s" #: ../../install_steps_interactive.pm_.c:627 msgid "Selected size is larger than available space" msgstr "O tamanho escolhido é maior que o espaço disponível" #: ../../install_steps_interactive.pm_.c:642 msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm_.c:643 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm_.c:646 msgid "With X" msgstr "" #: ../../install_steps_interactive.pm_.c:648 msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm_.c:649 msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm_.c:734 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Se você tiver todos os CDs da lista abaixo, clique em Ok.\n" "Se você não tiver nenhum desses CDs, clique em Cancelar.\n" "Se apenas alguns CDs estiverem faltando, desmarque-os, então clique em Ok." #: ../../install_steps_interactive.pm_.c:739 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom rotualdo \"%s\"" #: ../../install_steps_interactive.pm_.c:760 msgid "Preparing installation" msgstr "Preparando instalação" #: ../../install_steps_interactive.pm_.c:769 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Instalando pacote %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:815 msgid "Post-install configuration" msgstr "Configuração pós-instalação" #: ../../install_steps_interactive.pm_.c:821 #, fuzzy, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Insira um disquete no drive %s" #: ../../install_steps_interactive.pm_.c:827 #, fuzzy, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Insira um disquete vazio no drive %s" #: ../../install_steps_interactive.pm_.c:847 msgid "" "You now have the opportunity to download encryption software.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "Você agora tem a possibilidade de fazer o download de software voltado para " "codificação (encriptação).\n" "\n" "ATENÇÃO:\n" "Devido a vários requerimentos requeridos aplicados à esses software e " "impostos\n" "por várias jurisdições, o cliente e/ou o usuário final desse software deve\n" "se assegurar que as leis da sua jurisdição lhe permite fazer o download, " "armazenar\n" "e/ou usar esse software.\n" "\n" "Além disso, o cliente e/ou o usuário final deve estar particularmente " "prevenido para\n" "não infringir as leis de sua jurisdição. Se o cliente e/ou o usuário final\n" "não respeitar a provisão dessas leis aplicáveis, irá lhe(s) ocorrer sérias\n" "sanções.\n" "\n" "Em nenhum acontecimento irá a Mandrakesoft ou seu manufaturadores e/ou seu " "fornecedor\n" "ser responsávei por danos especiais, indiretos ou acidentais seja, qual for\n" "(incluindo, mas não limitada à perda de lucros, interrupção de negócios, " "perda\n" " de informação comercial e outras perdas monetárias, e eventual " "endividamento e indenização\n" "a ser paga, de acordo com a decisão da corte) saindo do uso, posse, ou do\n" "download isolado desse software, do qual o cliente e/ou o usuário final " "pode\n" "eventualmente ter acesso após ter assinado o acordo presente.\n" "\n" "\n" "Para qualquer pergunta relacionada a esse acordo, favor entrar em contato \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" #: ../../install_steps_interactive.pm_.c:886 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm_.c:901 #, fuzzy msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Contactando o mirror (espelho) para pegar a lista de pacotes disponíveis" #: ../../install_steps_interactive.pm_.c:906 msgid "Choose a mirror from which to get the packages" msgstr "Escolha um mirror (espelho) de onde pegar os pacotes" #: ../../install_steps_interactive.pm_.c:915 msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Contactando o mirror (espelho) para pegar a lista de pacotes disponíveis" #: ../../install_steps_interactive.pm_.c:943 msgid "Which is your timezone?" msgstr "Qual é o seu fuso horário?" #: ../../install_steps_interactive.pm_.c:948 #, fuzzy msgid "Hardware clock set to GMT" msgstr "O seu relógio do hardware está configurado como GMT?" #: ../../install_steps_interactive.pm_.c:949 msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm_.c:956 #, fuzzy msgid "NTP Server" msgstr "Servidor NIS" #: ../../install_steps_interactive.pm_.c:990 #: ../../install_steps_interactive.pm_.c:998 msgid "Remote CUPS server" msgstr "Sevidor CUPS remoto" #: ../../install_steps_interactive.pm_.c:991 msgid "No printer" msgstr "Nenhuma impressora" #: ../../install_steps_interactive.pm_.c:1008 #, fuzzy msgid "Do you have an ISA sound card?" msgstr "Você tem alguma outra?" #: ../../install_steps_interactive.pm_.c:1010 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:1012 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm_.c:1017 ../../steps.pm_.c:27 msgid "Summary" msgstr "Sumário" #: ../../install_steps_interactive.pm_.c:1020 msgid "Mouse" msgstr "Mouse" #: ../../install_steps_interactive.pm_.c:1022 msgid "Timezone" msgstr "Fuso horário" #: ../../install_steps_interactive.pm_.c:1023 ../../printerdrake.pm_.c:2989 #: ../../printerdrake.pm_.c:3078 msgid "Printer" msgstr "Impressora" #: ../../install_steps_interactive.pm_.c:1025 msgid "ISDN card" msgstr "Placa ISDN" #: ../../install_steps_interactive.pm_.c:1028 #: ../../install_steps_interactive.pm_.c:1030 msgid "Sound card" msgstr "Placa de som" #: ../../install_steps_interactive.pm_.c:1033 msgid "TV card" msgstr "Placa de TV" #: ../../install_steps_interactive.pm_.c:1075 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1104 msgid "LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:1076 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1113 #, fuzzy msgid "NIS" msgstr "Usar NIS" #: ../../install_steps_interactive.pm_.c:1077 #: ../../install_steps_interactive.pm_.c:1100 #: ../../install_steps_interactive.pm_.c:1121 #: ../../install_steps_interactive.pm_.c:1127 #, fuzzy msgid "Windows Domain" msgstr "Domínio NIS" #: ../../install_steps_interactive.pm_.c:1078 #: ../../install_steps_interactive.pm_.c:1100 #, fuzzy msgid "Local files" msgstr "Impressora local" #: ../../install_steps_interactive.pm_.c:1087 #: ../../install_steps_interactive.pm_.c:1088 ../../steps.pm_.c:24 msgid "Set root password" msgstr "Especificar senha do root" #: ../../install_steps_interactive.pm_.c:1089 msgid "No password" msgstr "Nenhuma senha" #: ../../install_steps_interactive.pm_.c:1094 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)" #: ../../install_steps_interactive.pm_.c:1100 ../../network/modem.pm_.c:49 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:173 msgid "Authentication" msgstr "Autenticação?" #: ../../install_steps_interactive.pm_.c:1108 #, fuzzy msgid "Authentication LDAP" msgstr "Autenticação?" #: ../../install_steps_interactive.pm_.c:1109 msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm_.c:1110 #, fuzzy msgid "LDAP Server" msgstr "servidor" #: ../../install_steps_interactive.pm_.c:1116 #, fuzzy msgid "Authentication NIS" msgstr "Autenticação NIS" #: ../../install_steps_interactive.pm_.c:1117 msgid "NIS Domain" msgstr "Domínio NIS" #: ../../install_steps_interactive.pm_.c:1118 msgid "NIS Server" msgstr "Servidor NIS" #: ../../install_steps_interactive.pm_.c:1124 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm_.c:1126 #, fuzzy msgid "Authentication Windows Domain" msgstr "Autenticação?" #: ../../install_steps_interactive.pm_.c:1128 #, fuzzy msgid "Domain Admin User Name" msgstr "Nome do domínio" #: ../../install_steps_interactive.pm_.c:1129 msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm_.c:1164 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Um disco de inicialização provê uma maneira de dar boot no Linux sem\n" "depender de um inicializador normal. Isso é necessário se você não quiser " "instalar\n" "o SILO no seu sistema, ou se outro sistema operacionar remover o SILO, ou\n" "o se\n" "SILO não funcionar com o seu hardware. Um disco de inicialização também\n" "pode\n" "ser usado com uma imagem de backup do Mandrake deixando muito mais fácil\n" "recuperar\n" "um sistema com danos severos.\n" "\n" "Se você quiser criar um disco de inicialização para o seu sistema, insira um " "disquete\n" "no drive e aperte em \"OK\"." #: ../../install_steps_interactive.pm_.c:1180 msgid "First floppy drive" msgstr "Primeiro drive de disquete" #: ../../install_steps_interactive.pm_.c:1181 msgid "Second floppy drive" msgstr "Segundo drive de disquete" #: ../../install_steps_interactive.pm_.c:1182 ../../printerdrake.pm_.c:2515 msgid "Skip" msgstr "Pular" #: ../../install_steps_interactive.pm_.c:1187 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Um disco de inicialização provê uma maneira de entrar no Linux sem depender\n" "de um inicializador normal. Isso é necessário se você não quiser instalar o " "LILO (ou\n" "o grub) no seu sistema, ou se outro sistema operacionar remover o LILO, ou " "se o LILO\n" "não funcionar com o seu hardware. Um disco de inicialização também pode ser " "usado com\n" "uma imagem de backup do Mandrake, deixando muito mais fácil recuperar um " "sistema\n" "com danos severos. Você quer criar um disco de inicialização?\n" "%s" #: ../../install_steps_interactive.pm_.c:1193 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../install_steps_interactive.pm_.c:1201 msgid "Sorry, no floppy drive available" msgstr "Desculpe, nenhum drive de disquete disponível" #: ../../install_steps_interactive.pm_.c:1205 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Escolha o drive de disquete que você quer usar para criar o disco de " "inicialização" #: ../../install_steps_interactive.pm_.c:1209 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "Insira um disquete no drive %s" #: ../../install_steps_interactive.pm_.c:1212 msgid "Creating bootdisk..." msgstr "Criando disco de inicialização" #: ../../install_steps_interactive.pm_.c:1219 msgid "Preparing bootloader..." msgstr "Preparando gerenciador de inicialização" #: ../../install_steps_interactive.pm_.c:1230 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" #: ../../install_steps_interactive.pm_.c:1236 msgid "Do you want to use aboot?" msgstr "Você quer usar o aboot?" #: ../../install_steps_interactive.pm_.c:1239 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Erro instalando o aboot, \n" "tentar forçar a instalação, mesmo que isso destrua a primeira partição?" #: ../../install_steps_interactive.pm_.c:1246 #, fuzzy msgid "Installing bootloader" msgstr "Instalar gerenciador de inicialização" #: ../../install_steps_interactive.pm_.c:1252 msgid "Installation of bootloader failed. The following error occured:" msgstr "" "A instalação do gerenciador de inicialização falhou. Ocorreram os seguintes " "erros:" #: ../../install_steps_interactive.pm_.c:1260 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Você pode precisar mudar seu dispostivo de boot Open Firmware\n" " para ativar o gerenciado de boot. Se você não ver o prompt dele ao\n" " reiniciar, segure Command-Option-O-F ao reiniciar e digite:\n" " setenv boot-device %s,\\\\:tbxi\n" " Então escreva: shut-down\n" "No seu próximo boot, você deve ver o prompt do gerenciador de boot." #: ../../install_steps_interactive.pm_.c:1294 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Insira um disquete vazio no drive %s" #: ../../install_steps_interactive.pm_.c:1298 msgid "Creating auto install floppy..." msgstr "Criando disquete de auto instalação" #: ../../install_steps_interactive.pm_.c:1309 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Alguns passos não foram completados.\n" "\n" "Você realmente quer sair agora?" #: ../../install_steps_interactive.pm_.c:1320 #, fuzzy, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Parabéns, a instalação foi completada.\n" "Remova a mídia de inicialização e aperte enter para reiniciar.\n" "\n" "Para informações sobre correções disponíveis para essa versão do Mandrake " "Linux,\n" "consulte a Errata disponível em http://www.mandrakelinux.com/.\n" "\n" "Informações sobre a configuração do sistema estão disponíveis no\n" "capítulo pós-instalação do Guia Oficial de Usuário Mandrake Linux." #: ../../install_steps_interactive.pm_.c:1333 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "" #: ../../install_steps_interactive.pm_.c:1338 msgid "Generate auto install floppy" msgstr "Criar disquete de auto instalação" #: ../../install_steps_interactive.pm_.c:1340 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "A auto instalação pode ser totalmente automatizada se\n" "você quiser, nesse caso, ela tomará de conta do disco\n" "rígido!! (em vista a instalação em outra máquina).\n" "\n" "Você pode preferir repetir a instalação.\n" #: ../../install_steps_interactive.pm_.c:1345 msgid "Automated" msgstr "Automático" #: ../../install_steps_interactive.pm_.c:1345 msgid "Replay" msgstr "Repetir" #: ../../install_steps_interactive.pm_.c:1348 msgid "Save packages selection" msgstr "Salvar seleção de pacotes" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Instalação do Mandrake Linux %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:35 msgid "" " / between elements | selects | next screen " msgstr "" " / move entre opções | seleciona | próxima " "tela " #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "kdesu ausente" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "" #: ../../interactive.pm_.c:152 #, fuzzy msgid "Choose a file" msgstr "Escolher ação" #: ../../interactive.pm_.c:320 msgid "Advanced" msgstr "Avançado" #: ../../interactive.pm_.c:321 ../../security/main.pm_.c:103 msgid "Basic" msgstr "" #: ../../interactive/newt.pm_.c:195 ../../my_gtk.pm_.c:158 #: ../../printerdrake.pm_.c:2169 msgid "<- Previous" msgstr "<- Anterior" #: ../../interactive/newt.pm_.c:195 ../../interactive/newt.pm_.c:197 #: ../../standalone/drakbackup_.c:4114 ../../standalone/drakbackup_.c:4141 #: ../../standalone/drakbackup_.c:4171 ../../standalone/drakbackup_.c:4197 #, fuzzy msgid "Next" msgstr "Próximo ->" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "Má escolha, tente novamente\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "Sua escolha? (padrão %s) " #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:70 #, fuzzy, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Sua escolha? (padrão %s) " #: ../../interactive/stdio.pm_.c:95 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Opções: %s" #: ../../interactive/stdio.pm_.c:96 #, fuzzy msgid "Do you want to click on this button?" msgstr "Você quer usar o aboot?" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm_.c:105 #, fuzzy, c-format msgid "Your choice? (default `%s'%s) " msgstr "Sua escolha? (padrão %s) " #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "" #: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:187 msgid "Czech (QWERTZ)" msgstr "Tcheco (QWERTZ)" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:189 msgid "German" msgstr "Alemão" #: ../../keyboard.pm_.c:154 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:197 msgid "Spanish" msgstr "Espanhol" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Finnish" msgstr "Filandês" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "French" msgstr "Francês" #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:231 msgid "Norwegian" msgstr "Norueguês" #: ../../keyboard.pm_.c:159 msgid "Polish" msgstr "Polonês" #: ../../keyboard.pm_.c:160 ../../keyboard.pm_.c:239 msgid "Russian" msgstr "Russo" #: ../../keyboard.pm_.c:162 ../../keyboard.pm_.c:241 msgid "Swedish" msgstr "Sueco" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:257 msgid "UK keyboard" msgstr "Inglês (UK)" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:258 msgid "US keyboard" msgstr "Americano (US)" #: ../../keyboard.pm_.c:166 #, fuzzy msgid "Albanian" msgstr "Iraniano" #: ../../keyboard.pm_.c:167 msgid "Armenian (old)" msgstr "Armênio (velho)" #: ../../keyboard.pm_.c:168 msgid "Armenian (typewriter)" msgstr "Armênio (máquina de escrever)" #: ../../keyboard.pm_.c:169 msgid "Armenian (phonetic)" msgstr "Armênio (fonético)" #: ../../keyboard.pm_.c:174 msgid "Azerbaidjani (latin)" msgstr "Azerbaidjani (latino)" #: ../../keyboard.pm_.c:176 msgid "Belgian" msgstr "Belga" #: ../../keyboard.pm_.c:177 #, fuzzy msgid "Bengali" msgstr "ativar" #: ../../keyboard.pm_.c:178 #, fuzzy msgid "Bulgarian (phonetic)" msgstr "Armênio (fonético)" #: ../../keyboard.pm_.c:179 #, fuzzy msgid "Bulgarian (BDS)" msgstr "Búlgaro" #: ../../keyboard.pm_.c:180 msgid "Brazilian (ABNT-2)" msgstr "Brasileiro (ABNT-2)" #: ../../keyboard.pm_.c:183 #, fuzzy msgid "Bosnian" msgstr "Estoniano" #: ../../keyboard.pm_.c:184 msgid "Belarusian" msgstr "Bielorusso" #: ../../keyboard.pm_.c:185 msgid "Swiss (German layout)" msgstr "Suíço (layout Alemão)" #: ../../keyboard.pm_.c:186 msgid "Swiss (French layout)" msgstr "Suíço (layout Francês)" #: ../../keyboard.pm_.c:188 msgid "Czech (QWERTY)" msgstr "Tcheco (QWERTY)" #: ../../keyboard.pm_.c:190 msgid "German (no dead keys)" msgstr "Alemão (sem teclas mortas)" #: ../../keyboard.pm_.c:191 msgid "Devanagari" msgstr "" #: ../../keyboard.pm_.c:192 msgid "Danish" msgstr "Dinamarquês" #: ../../keyboard.pm_.c:193 msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../keyboard.pm_.c:194 msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norueguês)" #: ../../keyboard.pm_.c:195 #, fuzzy msgid "Dvorak (Swedish)" msgstr "Dvorak (US)" #: ../../keyboard.pm_.c:196 msgid "Estonian" msgstr "Estoniano" #: ../../keyboard.pm_.c:200 msgid "Georgian (\"Russian\" layout)" msgstr "Georgiano (layout \"Russo\")" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Latin\" layout)" msgstr "Georgiano (layout \"Latin\")" #: ../../keyboard.pm_.c:202 msgid "Greek" msgstr "Grego" #: ../../keyboard.pm_.c:203 msgid "Gujarati" msgstr "" #: ../../keyboard.pm_.c:204 msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Hungarian" msgstr "Húngaro" #: ../../keyboard.pm_.c:206 msgid "Croatian" msgstr "Croata" #: ../../keyboard.pm_.c:207 msgid "Israeli" msgstr "Israelense" #: ../../keyboard.pm_.c:208 msgid "Israeli (Phonetic)" msgstr "Israelense (Fonético)" #: ../../keyboard.pm_.c:209 msgid "Iranian" msgstr "Iraniano" #: ../../keyboard.pm_.c:210 msgid "Icelandic" msgstr "Islandês" #: ../../keyboard.pm_.c:211 msgid "Italian" msgstr "Italiano" #: ../../keyboard.pm_.c:212 msgid "Inuktitut" msgstr "" #: ../../keyboard.pm_.c:213 msgid "Japanese 106 keys" msgstr "Japonês 106 teclas" #: ../../keyboard.pm_.c:216 msgid "Korean keyboard" msgstr "Koreano" #: ../../keyboard.pm_.c:217 msgid "Latin American" msgstr "Latino Americano" #: ../../keyboard.pm_.c:218 #, fuzzy msgid "Laotian" msgstr "Lugar" #: ../../keyboard.pm_.c:219 msgid "Lithuanian AZERTY (old)" msgstr "Lituânio AZERTY (velho)" #: ../../keyboard.pm_.c:221 msgid "Lithuanian AZERTY (new)" msgstr "Lituânio AZERTY (novo)" #: ../../keyboard.pm_.c:222 msgid "Lithuanian \"number row\" QWERTY" msgstr "Lituânio \"número de colunas\" QWERTY" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Lituânio \"fonético\" QWERTY" #: ../../keyboard.pm_.c:224 #, fuzzy msgid "Latvian" msgstr "Lugar" #: ../../keyboard.pm_.c:225 msgid "Macedonian" msgstr "Macedônio" #: ../../keyboard.pm_.c:226 msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm_.c:227 #, fuzzy msgid "Mongolian (cyrillic)" msgstr "Azerbaidjani (cirílico)" #: ../../keyboard.pm_.c:228 msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm_.c:229 msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm_.c:230 msgid "Dutch" msgstr "Holandês" #: ../../keyboard.pm_.c:232 msgid "Polish (qwerty layout)" msgstr "Polonês (layout QWERTY)" #: ../../keyboard.pm_.c:233 msgid "Polish (qwertz layout)" msgstr "Polonês (layout QWERTZ)" #: ../../keyboard.pm_.c:234 msgid "Portuguese" msgstr "Português" #: ../../keyboard.pm_.c:235 msgid "Canadian (Quebec)" msgstr "Canadense (Quebec)" #: ../../keyboard.pm_.c:237 #, fuzzy msgid "Romanian (qwertz)" msgstr "Russo (Yawerty)" #: ../../keyboard.pm_.c:238 #, fuzzy msgid "Romanian (qwerty)" msgstr "Russo (Yawerty)" #: ../../keyboard.pm_.c:240 msgid "Russian (Yawerty)" msgstr "Russo (Yawerty)" #: ../../keyboard.pm_.c:242 msgid "Slovenian" msgstr "Eslovênio" #: ../../keyboard.pm_.c:243 msgid "Slovakian (QWERTZ)" msgstr "Eslováquio (QWERTZ)" #: ../../keyboard.pm_.c:244 msgid "Slovakian (QWERTY)" msgstr "Eslováquio (QWERTY)" #: ../../keyboard.pm_.c:246 #, fuzzy msgid "Serbian (cyrillic)" msgstr "Azerbaidjani (cirílico)" #: ../../keyboard.pm_.c:248 msgid "Tamil (Unicode)" msgstr "" #: ../../keyboard.pm_.c:249 msgid "Tamil (TSCII)" msgstr "" #: ../../keyboard.pm_.c:250 msgid "Thai keyboard" msgstr "Teclado Tailandês" #: ../../keyboard.pm_.c:252 #, fuzzy msgid "Tajik keyboard" msgstr "Teclado Tailandês" #: ../../keyboard.pm_.c:253 msgid "Turkish (traditional \"F\" model)" msgstr "Turco (modelo \"F\" tradicional)" #: ../../keyboard.pm_.c:254 msgid "Turkish (modern \"Q\" model)" msgstr "Turco (modelo moderno \"Q\")" #: ../../keyboard.pm_.c:256 msgid "Ukrainian" msgstr "Ucraniano" #: ../../keyboard.pm_.c:259 msgid "US keyboard (international)" msgstr "Americano (Internacional)" #: ../../keyboard.pm_.c:260 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamita \"número de colunas\" QWERTY" #: ../../keyboard.pm_.c:261 #, fuzzy msgid "Yugoslavian (latin)" msgstr "Iugoslávio (latin/cirílico)" #: ../../keyboard.pm_.c:268 msgid "Right Alt key" msgstr "" #: ../../keyboard.pm_.c:269 msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:270 msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:271 msgid "CapsLock key" msgstr "" #: ../../keyboard.pm_.c:272 msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:273 msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:274 msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm_.c:275 msgid "Left \"Windows\" key" msgstr "" #: ../../keyboard.pm_.c:276 msgid "Right \"Windows\" key" msgstr "" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "Monts circulares %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "Remover os volumes lógicos primeiro\n" #: ../../modparm.pm_.c:50 #, fuzzy msgid "a number" msgstr "Número do telefone" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modparm.pm_.c:54 msgid "comma separated numbers" msgstr "" #: ../../modparm.pm_.c:54 #, fuzzy msgid "comma separated strings" msgstr "Formatar partições" #: ../../modules.pm_.c:293 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - Mouse" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan/FistMouse (serial)" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "Mouse Genérico PS2 com roda" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 #, fuzzy msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 botão" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "Mouse Genérico com 2 Botões" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "Roda" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "serial" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "Mouse Genérico com 3 Botões" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "Logitech Série CC (serial)" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "Série MM" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Mouse Logitech (serial, tipo C7 antigo)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "busmouse" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 botões" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 botões" #: ../../mouse.pm_.c:75 msgid "none" msgstr "nenhum" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "Nenhum Mouse" #: ../../mouse.pm_.c:486 msgid "Please test the mouse" msgstr "Favor testar o mouse" #: ../../mouse.pm_.c:487 msgid "To activate the mouse," msgstr "Para ativar o mouse," #: ../../mouse.pm_.c:488 msgid "MOVE YOUR WHEEL!" msgstr "MOVA SUA RODA!" #: ../../my_gtk.pm_.c:64 msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" #: ../../my_gtk.pm_.c:159 msgid "Finish" msgstr "Terminar" #: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2171 msgid "Next ->" msgstr "Próximo ->" #: ../../my_gtk.pm_.c:287 msgid "Is this correct?" msgstr "Isto está correto?" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:222 msgid "Info" msgstr "Informação" #: ../../my_gtk.pm_.c:380 msgid "Expand Tree" msgstr "Expandir Árvore" #: ../../my_gtk.pm_.c:381 msgid "Collapse Tree" msgstr "Colapsar Árvore" #: ../../my_gtk.pm_.c:382 msgid "Toggle between flat and group sorted" msgstr "Mudar entre organização plana ou em grupo" #: ../../network/adsl.pm_.c:23 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "Conectar à Internet" #: ../../network/adsl.pm_.c:24 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "A maneira mais comum de se conectar com adsl é pppoe.\n" "Mas algumas conexões usam pptp, umas poucas usam dhcp.\n" "Se você não sabe, escolha 'usar pppoe'" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "" #: ../../network/adsl.pm_.c:26 msgid "use dhcp" msgstr "usar dhcp" #: ../../network/adsl.pm_.c:26 msgid "use pppoe" msgstr "usar pppoe" #: ../../network/adsl.pm_.c:26 msgid "use pptp" msgstr "usar pptp" #: ../../network/drakfirewall.pm_.c:12 #, fuzzy msgid "Web Server" msgstr "servidor" #: ../../network/drakfirewall.pm_.c:17 #, fuzzy msgid "Domain Name Server" msgstr "Nome do domínio" #: ../../network/drakfirewall.pm_.c:32 #, fuzzy msgid "Mail Server" msgstr "Servidor, Bancos de dados" #: ../../network/drakfirewall.pm_.c:37 #, fuzzy msgid "POP and IMAP Server" msgstr "servidor" #: ../../network/drakfirewall.pm_.c:111 #, fuzzy msgid "No network card" msgstr "nenhuma placa de rede encontrada" #: ../../network/drakfirewall.pm_.c:129 #, fuzzy msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "configurador pequenoFirewall\n" "\n" "Isso configura um firewall pessoal para essa máquina Mandrake Linux.\n" "Para um firewall dedicado potente, favor procurar a distribuição\n" "especilizada MandrakeSecurity Firewall." #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm_.c:169 #, fuzzy msgid "Other ports" msgstr "Testar portas" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "" "Qual cliente dhcp você quer usar?\n" "O padrão é dhcpcd" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Nenhum adaptador de rede ethernet foi detectado em seu sistema.\n" "Eu não posso configurar esse tipo de conexão." #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:238 msgid "Choose the network interface" msgstr "Escolha a interface de rede" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "Favor escolher qual adaptador de rede você quer usar para se conectar à " "Internet" #: ../../network/ethernet.pm_.c:178 msgid "no network card found" msgstr "nenhuma placa de rede encontrada" #: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:362 msgid "Configuring network" msgstr "Configurando rede" #: ../../network/ethernet.pm_.c:203 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Favor entrar com o nome do seu host (se você souber).\n" "Alguns servidores DHCP requerem o nome do host para funcionar.\n" "Seu nome do host deve ser um nome de host totalmente qualificado,\n" "como por exemplo ``mybox.mylab.myco.com''." #: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:367 msgid "Host name" msgstr "Host name (nome do host)" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:90 ../../network/netconnect.pm_.c:104 #: ../../network/netconnect.pm_.c:159 ../../network/netconnect.pm_.c:174 #: ../../network/netconnect.pm_.c:201 ../../network/netconnect.pm_.c:224 #: ../../network/netconnect.pm_.c:232 msgid "Network Configuration Wizard" msgstr "Auxiliar de Configuração da Rede" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "Modem ISDN externo" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "Placa ISDN interna" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "De que tipo é sua conexão ISDN?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/isdn.pm_.c:54 #, fuzzy msgid "New configuration (isdn-light)" msgstr "Configuração de Firewall detectado!" #: ../../network/isdn.pm_.c:54 #, fuzzy msgid "Old configuration (isdn4net)" msgstr "Configuração de Firewall detectado!" #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188 #: ../../network/isdn.pm_.c:200 ../../network/isdn.pm_.c:206 #: ../../network/isdn.pm_.c:213 ../../network/isdn.pm_.c:223 msgid "ISDN Configuration" msgstr "Configuração ISDN" #: ../../network/isdn.pm_.c:170 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Selecione o seu provedor.\n" " Se não estiver na lista, escolha Não Listado" #: ../../network/isdn.pm_.c:183 #, fuzzy msgid "Europe protocol" msgstr "Protocolo da inicialização" #: ../../network/isdn.pm_.c:183 #, fuzzy msgid "Europe protocol (EDSS1)" msgstr "Europa (EDSS1)" #: ../../network/isdn.pm_.c:185 #, fuzzy msgid "Protocol for the rest of the world" msgstr "Resto do mundo" #: ../../network/isdn.pm_.c:185 #, fuzzy msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Resto do mundo \n" " sem Canal-D (linhas arrendadas)" #: ../../network/isdn.pm_.c:189 msgid "Which protocol do you want to use?" msgstr "Qual protocolo você quer usar?" #: ../../network/isdn.pm_.c:200 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm_.c:207 msgid "What kind of card do you have?" msgstr "Qual tipo de placa você tem?" #: ../../network/isdn.pm_.c:208 msgid "I don't know" msgstr "Eu não sei" #: ../../network/isdn.pm_.c:208 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:208 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:214 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Se você tiver uma placa ISA, os valores da próxima tela devem estar certos.\n" "\n" "Se você tiver uma placa PCMCIA, você tem que saber o irq e io de sua placa.\n" #: ../../network/isdn.pm_.c:218 msgid "Abort" msgstr "Abortar" #: ../../network/isdn.pm_.c:218 msgid "Continue" msgstr "Continuar" #: ../../network/isdn.pm_.c:224 msgid "Which is your ISDN card?" msgstr "Qual é a sua placa ISDN?" #: ../../network/isdn.pm_.c:243 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Eu detectei um placa ISDN PCI, mas não sei qual é o tipo. Favor selecionar " "uma placa PCI na próxima tela." #: ../../network/isdn.pm_.c:252 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" "Nenhuma placa ISDN PCI encontrada. Favor selecionar uma na próxima tela" #: ../../network/modem.pm_.c:39 msgid "Please choose which serial port your modem is connected to." msgstr "Favor escolher em qual porta serial seu modem está conectado." #: ../../network/modem.pm_.c:44 msgid "Dialup options" msgstr "Opções dialup" #: ../../network/modem.pm_.c:45 ../../standalone/drakconnect_.c:621 msgid "Connection name" msgstr "Nome da conexão" #: ../../network/modem.pm_.c:46 ../../standalone/drakconnect_.c:622 msgid "Phone number" msgstr "Número do telefone" #: ../../network/modem.pm_.c:47 ../../standalone/drakconnect_.c:623 msgid "Login ID" msgstr "ID de Login" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "CHAP" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "Script-based" msgstr "Baseado em script" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "Terminal-based" msgstr "Baseado em terminal" #: ../../network/modem.pm_.c:50 ../../standalone/drakconnect_.c:626 msgid "Domain name" msgstr "Nome do domínio" #: ../../network/modem.pm_.c:51 ../../standalone/drakconnect_.c:627 msgid "First DNS Server (optional)" msgstr "Primeiro Servidor DNS (opcional)" #: ../../network/modem.pm_.c:52 ../../standalone/drakconnect_.c:628 msgid "Second DNS Server (optional)" msgstr "Segundo Servidor DNS (opcional)" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Você pode se disconectar ou reconfigurar sua conexão." #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Você pode reconfigurar sua conexão." #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "Você está conectado à Internet." #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "Você pode se conectar à Internet ou reconfigurar sua conexão." #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "Você não está conectado à Internet." #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "Conectar" #: ../../network/netconnect.pm_.c:38 msgid "Disconnect" msgstr "Desconectar" #: ../../network/netconnect.pm_.c:40 #, fuzzy msgid "Configure the connection" msgstr "Configurar rede" #: ../../network/netconnect.pm_.c:45 msgid "Internet connection & configuration" msgstr "Conexão e configuração da Internet" #: ../../network/netconnect.pm_.c:95 #, fuzzy, c-format msgid "We are now going to configure the %s connection." msgstr "" "\n" "Você pode se disconectar ou reconfigurar sua conexão." #: ../../network/netconnect.pm_.c:104 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "Você pode se disconectar ou reconfigurar sua conexão." #: ../../network/netconnect.pm_.c:133 ../../network/netconnect.pm_.c:251 #: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:63 msgid "Network Configuration" msgstr "Configuração da Rede" #: ../../network/netconnect.pm_.c:134 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Como você está fazendo uma instalação por rede, sua rede já está " "configurada.\n" "Clique em Ok para manter sua configuração, ou cancelar para reconfigurar sua " "conexão de Internet & Rede.\n" #: ../../network/netconnect.pm_.c:160 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Bem-vindo ao Ajudante de Configuração de Rede\n" "\n" "Estamos para configurar sua conexão de rede/internet.\n" "Se você não quiser usar a auto detecção, desmarque a opção.\n" #: ../../network/netconnect.pm_.c:166 msgid "Choose the profile to configure" msgstr "Escolha o perfil a configurar:" #: ../../network/netconnect.pm_.c:167 msgid "Use auto detection" msgstr "Usar auto detecção" #: ../../network/netconnect.pm_.c:168 ../../printerdrake.pm_.c:3203 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277 #: ../../standalone/drakfloppy_.c:146 msgid "Expert Mode" msgstr "Modo expert" #: ../../network/netconnect.pm_.c:174 ../../printerdrake.pm_.c:399 msgid "Detecting devices..." msgstr "Detectando dispositivos..." #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 msgid "Normal modem connection" msgstr "Conexão normal via modem" #: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194 #, c-format msgid "detected on port %s" msgstr "detectado na porta %s" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 msgid "ISDN connection" msgstr "Conexão ISDN" #: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195 #, c-format msgid "detected %s" msgstr "detectado %s" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 #, fuzzy msgid "ADSL connection" msgstr "Coneção LAN" #: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196 #, c-format msgid "detected on interface %s" msgstr "detectado na interface %s" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 msgid "Cable connection" msgstr "Conexão via cabo" #: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197 #, fuzzy msgid "cable connection detected" msgstr "Conexão via cabo" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "LAN connection" msgstr "Coneção LAN" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 msgid "ethernet card(s) detected" msgstr "placa(s) ethernet detectada(s)" #: ../../network/netconnect.pm_.c:201 #, fuzzy msgid "Choose the connection you want to configure" msgstr "Escolha a ferramente que você quer usar" #: ../../network/netconnect.pm_.c:225 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:226 #, fuzzy msgid "Internet connection" msgstr "Compartilhamento da Conexão à Internet" #: ../../network/netconnect.pm_.c:232 msgid "Do you want to start the connection at boot?" msgstr "Você quer iniciar sua conexão ao iniciar?" #: ../../network/netconnect.pm_.c:246 msgid "Network configuration" msgstr "Configuração da Rede" #: ../../network/netconnect.pm_.c:247 msgid "The network needs to be restarted" msgstr "" #: ../../network/netconnect.pm_.c:251 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Um problema ocorreu reiniciando a rede: \n" "\n" "%s" #: ../../network/netconnect.pm_.c:261 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "Parabéns, a configuração da rede e internet está concluída.\n" "\n" "A configuração agora será aplicada no seu sistema.\n" #: ../../network/netconnect.pm_.c:265 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Quando isso terminar, nós recomendados você a reiniciar o seu\n" "ambiente X para evitar o problema da mudança do nome do host." #: ../../network/netconnect.pm_.c:266 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/network.pm_.c:291 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "ATENÇÃO: Esse dispostivo já foi configurado para se conectar à Internet.\n" "Apenas aceite para manter esse dispositivo configurado.\n" "A modificação dos campos abaixo irá sobrepor essa configuração." #: ../../network/network.pm_.c:296 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Favor entrar com a configuração IP para esta máquina.\n" "Cada item deve ser entrando como endereço IP pontilhado-decimal\n" "(por exemplo, 1.2.3.4)." #: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307 #, c-format msgid "Configuring network device %s" msgstr "Configurando dispositivo de rede %s" #: ../../network/network.pm_.c:307 #, c-format msgid " (driver %s)" msgstr " (driver %s)" #: ../../network/network.pm_.c:309 ../../standalone/drakconnect_.c:231 #: ../../standalone/drakconnect_.c:467 msgid "IP address" msgstr "Endereço IP" #: ../../network/network.pm_.c:310 ../../standalone/drakconnect_.c:468 #: ../../standalone/drakgw_.c:295 msgid "Netmask" msgstr "Netmask" #: ../../network/network.pm_.c:311 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network/network.pm_.c:311 msgid "Automatic IP" msgstr "IP Automático" #: ../../network/network.pm_.c:312 #, fuzzy msgid "Start at boot" msgstr "Iniciado na inicialização" #: ../../network/network.pm_.c:333 ../../printerdrake.pm_.c:875 msgid "IP address should be in format 1.2.3.4" msgstr "O endereço IP deve ser no formato 1.2.3.4" #: ../../network/network.pm_.c:363 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Favor entrar com o nome do seu host.\n" "Seu nome do host deve ser um nome de host totalmente qualificado,\n" "como por exemplo ``mybox.mylab.myco.com'' .\n" "Você também pode entrar como o endereço IP de um gateway se você tiver um" #: ../../network/network.pm_.c:368 msgid "DNS server" msgstr "Servidor DNS" #: ../../network/network.pm_.c:369 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm_.c:371 msgid "Gateway device" msgstr "Dispositivo de gateway" #: ../../network/network.pm_.c:376 #, fuzzy msgid "DNS server address should be in format 1.2.3.4" msgstr "O endereço IP deve ser no formato 1.2.3.4" #: ../../network/network.pm_.c:380 #, fuzzy msgid "Gateway address should be in format 1.2.3.4" msgstr "O endereço IP deve ser no formato 1.2.3.4" #: ../../network/network.pm_.c:394 msgid "Proxies configuration" msgstr "Configuração de proxies" #: ../../network/network.pm_.c:395 msgid "HTTP proxy" msgstr "Proxy HTTP" #: ../../network/network.pm_.c:396 msgid "FTP proxy" msgstr "Proxy FTP" #: ../../network/network.pm_.c:397 msgid "Track network card id (useful for laptops)" msgstr "" #: ../../network/network.pm_.c:400 msgid "Proxy should be http://..." msgstr "O proxy deve ser http://..." #: ../../network/network.pm_.c:401 ../../proxy.pm_.c:65 #, fuzzy msgid "Url should begin with 'ftp:' or 'http:'" msgstr "O proxy deve ser http://..." #: ../../network/shorewall.pm_.c:25 msgid "Firewalling configuration detected!" msgstr "Configuração de Firewall detectado!" #: ../../network/shorewall.pm_.c:26 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "Atenção! Uma configuração de firewall foi detectada. Talvez você terá que " "fazer alguma correção manual após a instalação." #: ../../network/tools.pm_.c:41 msgid "Internet configuration" msgstr "Configuração da Internet" #: ../../network/tools.pm_.c:42 msgid "Do you want to try to connect to the Internet now?" msgstr "Você quer tentar se conectar à Internet agora?" #: ../../network/tools.pm_.c:46 ../../standalone/drakconnect_.c:196 msgid "Testing your connection..." msgstr "Testando sua conexão..." #: ../../network/tools.pm_.c:56 msgid "The system is now connected to Internet." msgstr "O sistema está conectado à Internet." #: ../../network/tools.pm_.c:57 msgid "For security reason, it will be disconnected now." msgstr "Por razão de segurança, você será desconectado agora." #: ../../network/tools.pm_.c:58 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "O sistema não está conectado à internet.\n" "Tente reconfigurar sua conexão." #: ../../network/tools.pm_.c:82 msgid "Connection Configuration" msgstr "Configuração da Conexão" #: ../../network/tools.pm_.c:83 msgid "Please fill or check the field below" msgstr "Favor preencher ou marcar os campos abaixo" #: ../../network/tools.pm_.c:85 ../../standalone/drakconnect_.c:607 msgid "Card IRQ" msgstr "IRQ da Placa" #: ../../network/tools.pm_.c:86 ../../standalone/drakconnect_.c:608 msgid "Card mem (DMA)" msgstr "Memória da Placa (DMA)" #: ../../network/tools.pm_.c:87 ../../standalone/drakconnect_.c:609 msgid "Card IO" msgstr "IO da Placa" #: ../../network/tools.pm_.c:88 ../../standalone/drakconnect_.c:610 msgid "Card IO_0" msgstr "IO_O da Placa" #: ../../network/tools.pm_.c:89 ../../standalone/drakconnect_.c:611 msgid "Card IO_1" msgstr "IO_1 da Placa" #: ../../network/tools.pm_.c:90 ../../standalone/drakconnect_.c:612 msgid "Your personal phone number" msgstr "O número do seu telefone" #: ../../network/tools.pm_.c:91 ../../standalone/drakconnect_.c:613 msgid "Provider name (ex provider.net)" msgstr "Nome do provedor (ex: provedor.net)" #: ../../network/tools.pm_.c:92 ../../standalone/drakconnect_.c:614 msgid "Provider phone number" msgstr "Número do telefone do provedor" #: ../../network/tools.pm_.c:93 ../../standalone/drakconnect_.c:615 msgid "Provider dns 1 (optional)" msgstr "DNS 1 do provedor (opcional)" #: ../../network/tools.pm_.c:94 ../../standalone/drakconnect_.c:616 msgid "Provider dns 2 (optional)" msgstr "DNS 2 do provedor (opcional)" #: ../../network/tools.pm_.c:95 #, fuzzy msgid "Choose your country" msgstr "Escolha seu teclado" #: ../../network/tools.pm_.c:96 ../../standalone/drakconnect_.c:619 msgid "Dialing mode" msgstr "Modo de discagem" #: ../../network/tools.pm_.c:97 ../../standalone/drakconnect_.c:631 #, fuzzy msgid "Connection speed" msgstr "Tipo de conexão: " #: ../../network/tools.pm_.c:98 ../../standalone/drakconnect_.c:632 #, fuzzy msgid "Connection timeout (in sec)" msgstr "Tipo de conexão: " #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:617 msgid "Account Login (user name)" msgstr "Nome da conta (nome do usuário)" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:618 #: ../../standalone/drakconnect_.c:649 msgid "Account Password" msgstr "Senha da conta" #: ../../network/tools.pm_.c:104 ../../network/tools.pm_.c:118 msgid "United Kingdom" msgstr "" #: ../../partition_table.pm_.c:602 msgid "mount failed: " msgstr "falhou ao montar: " #: ../../partition_table.pm_.c:666 msgid "Extended partition not supported on this platform" msgstr "Partição extendida não suportada nessa plataforma" #: ../../partition_table.pm_.c:684 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Você tem um buraco em sua tabela de partição e eu não posso usá-lo.\n" "A única solução é mover suas partições primárias para ter o buraco próximo " "das partições extendidas" #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Restauração pelo arquivo %s falhou: %s" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "Arquivo de backup defeituoso" #: ../../partition_table.pm_.c:798 #, c-format msgid "Error writing to file %s" msgstr "Erro gravando no arquivo %s" #: ../../partition_table/raw.pm_.c:189 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "Algo ruim está acontecendo com o seu drive. \n" "O teste que checa a integridade dos dados falhou. \n" "Isso significa que gravar algo no disco resultará em lixo aleatório." #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "tem que ter" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "importante" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "muito bom" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "bom" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "talvez" #: ../../printer.pm_.c:26 msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer.pm_.c:27 msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer.pm_.c:28 msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer.pm_.c:29 msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer.pm_.c:34 ../../printer.pm_.c:1181 msgid "CUPS" msgstr "" #: ../../printer.pm_.c:35 msgid "LPRng" msgstr "" #: ../../printer.pm_.c:36 msgid "LPD" msgstr "" #: ../../printer.pm_.c:37 msgid "PDQ" msgstr "" #: ../../printer.pm_.c:49 msgid "Local printer" msgstr "Impressora local" #: ../../printer.pm_.c:50 msgid "Remote printer" msgstr "Impressora remota" #: ../../printer.pm_.c:51 #, fuzzy msgid "Printer on remote CUPS server" msgstr "Sevidor CUPS remoto" #: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:898 #, fuzzy msgid "Printer on remote lpd server" msgstr "Servidor lpd remoto" #: ../../printer.pm_.c:53 msgid "Network printer (TCP/Socket)" msgstr "Impressora da rede (TCP/Socket)" #: ../../printer.pm_.c:54 #, fuzzy msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT" #: ../../printer.pm_.c:55 #, fuzzy msgid "Printer on NetWare server" msgstr "Servidor de Impressão" #: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:902 #, fuzzy msgid "Enter a printer device URI" msgstr "Dispositivo de Impressão URI" #: ../../printer.pm_.c:57 msgid "Pipe job into a command" msgstr "" #: ../../printer.pm_.c:346 ../../printer.pm_.c:388 ../../printer.pm_.c:570 msgid "Unknown Model" msgstr "" #: ../../printer.pm_.c:791 ../../printer.pm_.c:982 ../../printer.pm_.c:1374 #: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:3471 msgid "Unknown model" msgstr "" #: ../../printer.pm_.c:819 #, fuzzy msgid "Local Printers" msgstr "Impressora local" #: ../../printer.pm_.c:821 ../../printer.pm_.c:1182 #, fuzzy msgid "Remote Printers" msgstr "Impressora remota" #: ../../printer.pm_.c:828 ../../printerdrake.pm_.c:417 #, c-format msgid " on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:831 ../../printerdrake.pm_.c:419 #, c-format msgid ", USB printer \\/*%s" msgstr "" #: ../../printer.pm_.c:836 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:839 msgid ", multi-function device on USB" msgstr "" #: ../../printer.pm_.c:841 msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer.pm_.c:843 msgid ", multi-function device" msgstr "" #: ../../printer.pm_.c:846 #, fuzzy, c-format msgid ", printing to %s" msgstr "Erro gravando no arquivo %s" #: ../../printer.pm_.c:848 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:850 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer.pm_.c:854 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer.pm_.c:858 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:860 #, c-format msgid ", using command %s" msgstr "" #: ../../printer.pm_.c:979 ../../printerdrake.pm_.c:1701 msgid "Raw printer (No driver)" msgstr "" #: ../../printer.pm_.c:1151 #, fuzzy, c-format msgid "(on %s)" msgstr "(módulo %s)" #: ../../printer.pm_.c:1153 msgid "(on this machine)" msgstr "" #: ../../printer.pm_.c:1178 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "IP do servidor CUPS" #: ../../printer.pm_.c:1184 ../../printerdrake.pm_.c:3123 #: ../../printerdrake.pm_.c:3134 ../../printerdrake.pm_.c:3360 #: ../../printerdrake.pm_.c:3412 ../../printerdrake.pm_.c:3438 #: ../../printerdrake.pm_.c:3613 ../../printerdrake.pm_.c:3615 msgid " (Default)" msgstr " (Default)" #: ../../printerdrake.pm_.c:25 msgid "Select Printer Connection" msgstr "Selecionar Coneção da Impressora" #: ../../printerdrake.pm_.c:26 msgid "How is the printer connected?" msgstr "Como a impressora está conetada?" #: ../../printerdrake.pm_.c:28 #, fuzzy msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "Com um servidor CUPS remoto, você não tem que configurar\n" "nenhuma impressora aqui; elas serão detectadas automaticamente.\n" "Se tiver dúvida, selecione \"Servidor CUPS remoto\"." #: ../../printerdrake.pm_.c:36 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3187 #, fuzzy msgid "CUPS configuration" msgstr "Configuração LAN" #: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3188 #, fuzzy msgid "Specify CUPS server" msgstr "Sevidor CUPS remoto" #: ../../printerdrake.pm_.c:86 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" #: ../../printerdrake.pm_.c:87 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" #: ../../printerdrake.pm_.c:91 #, fuzzy msgid "The IP address should look like 192.168.1.20" msgstr "O endereço IP deve ser no formato 1.2.3.4" #: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1109 #, fuzzy msgid "The port number should be an integer!" msgstr "O número da porta deve ser numérico" #: ../../printerdrake.pm_.c:102 msgid "CUPS server IP" msgstr "IP do servidor CUPS" #: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1129 msgid "Port" msgstr "Porta" #: ../../printerdrake.pm_.c:105 #, fuzzy msgid "Automatic CUPS configuration" msgstr "Configuração do estilo de inicialização" #: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247 #: ../../printerdrake.pm_.c:1574 ../../printerdrake.pm_.c:1578 #: ../../printerdrake.pm_.c:1696 ../../printerdrake.pm_.c:2248 #: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2460 #: ../../printerdrake.pm_.c:2533 ../../printerdrake.pm_.c:2554 #: ../../printerdrake.pm_.c:2747 ../../printerdrake.pm_.c:2792 #: ../../printerdrake.pm_.c:2797 ../../printerdrake.pm_.c:2831 #: ../../printerdrake.pm_.c:2836 ../../printerdrake.pm_.c:2873 #: ../../printerdrake.pm_.c:2926 ../../printerdrake.pm_.c:2946 #: ../../printerdrake.pm_.c:2960 ../../printerdrake.pm_.c:2994 #: ../../printerdrake.pm_.c:3040 ../../printerdrake.pm_.c:3058 #: ../../printerdrake.pm_.c:3147 ../../printerdrake.pm_.c:3226 #: ../../printerdrake.pm_.c:3528 ../../printerdrake.pm_.c:3583 #: ../../printerdrake.pm_.c:3636 ../../standalone/printerdrake_.c:57 msgid "Printerdrake" msgstr "Printerdrake" #: ../../printerdrake.pm_.c:178 #, fuzzy msgid "Checking your system..." msgstr "Qual sistema de impressão você quer usar?" #: ../../printerdrake.pm_.c:186 msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printerdrake.pm_.c:198 #, fuzzy msgid "" "The following printers\n" "\n" msgstr "Os seguintes pacotes serão removidos" #: ../../printerdrake.pm_.c:199 #, fuzzy msgid "" "The following printer\n" "\n" msgstr "Os seguintes pacotes serão removidos" #: ../../printerdrake.pm_.c:201 msgid "" "\n" "and one unknown printer are " msgstr "" #: ../../printerdrake.pm_.c:203 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" #: ../../printerdrake.pm_.c:207 msgid "" "\n" "are " msgstr "" #: ../../printerdrake.pm_.c:208 msgid "" "\n" "is " msgstr "" #: ../../printerdrake.pm_.c:210 #, fuzzy msgid "directly connected to your system" msgstr "Nenhum adaptador de rede em seu sistema!" #: ../../printerdrake.pm_.c:213 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printerdrake.pm_.c:215 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printerdrake.pm_.c:221 #, fuzzy msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Favor escolher em qual porta serial seu modem está conectado." #: ../../printerdrake.pm_.c:235 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printerdrake.pm_.c:236 #, fuzzy msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Você quer testar a impressão?" #: ../../printerdrake.pm_.c:238 #, fuzzy msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Você quer iniciar sua conexão ao iniciar?" #: ../../printerdrake.pm_.c:239 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printerdrake.pm_.c:240 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printerdrake.pm_.c:279 ../../printerdrake.pm_.c:291 #: ../../printerdrake.pm_.c:361 ../../printerdrake.pm_.c:3169 #: ../../printerdrake.pm_.c:3299 #, fuzzy msgid "Add a new printer" msgstr "Nenhuma impressora" #: ../../printerdrake.pm_.c:280 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printerdrake.pm_.c:293 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:302 ../../printerdrake.pm_.c:319 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:310 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:328 #, fuzzy msgid "Auto-detect printers connected to this machine" msgstr "Impressora remota" #: ../../printerdrake.pm_.c:331 msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printerdrake.pm_.c:334 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printerdrake.pm_.c:362 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:590 #: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 #, fuzzy msgid "Printer auto-detection" msgstr "Usar auto detecção" #: ../../printerdrake.pm_.c:421 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:423 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../printerdrake.pm_.c:429 #, fuzzy, c-format msgid "Detected %s" msgstr "detectado %s" #: ../../printerdrake.pm_.c:433 ../../printerdrake.pm_.c:464 #: ../../printerdrake.pm_.c:483 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:435 ../../printerdrake.pm_.c:466 #: ../../printerdrake.pm_.c:488 #, c-format msgid "USB printer \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:437 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Impressora da rede (TCP/Socket)" #: ../../printerdrake.pm_.c:439 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../printerdrake.pm_.c:575 ../../printerdrake.pm_.c:600 #, fuzzy msgid "Local Printer" msgstr "Impressora local" #: ../../printerdrake.pm_.c:576 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:580 #, fuzzy msgid "You must enter a device or file name!" msgstr "Dispositivo de Impressão URI" #: ../../printerdrake.pm_.c:591 #, fuzzy msgid "No printer found!" msgstr "Impressora local" #: ../../printerdrake.pm_.c:601 #, fuzzy msgid "Available printers" msgstr "Impressora local" #: ../../printerdrake.pm_.c:605 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:606 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:608 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printerdrake.pm_.c:609 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printerdrake.pm_.c:611 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:612 #, fuzzy msgid "Please choose the port where your printer is connected to." msgstr "Favor escolher em qual porta serial seu modem está conectado." #: ../../printerdrake.pm_.c:614 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:619 #, fuzzy msgid "You must choose/enter a printer/device!" msgstr "Dispositivo de Impressão URI" #: ../../printerdrake.pm_.c:639 #, fuzzy msgid "Manual configuration" msgstr "Configuração" #: ../../printerdrake.pm_.c:693 msgid "Remote lpd Printer Options" msgstr "Opções da impressora lpd Remota" #: ../../printerdrake.pm_.c:694 #, fuzzy msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Para usar uma fila de impressão lpd remota, você precisa\n" "dar o nome do host e o servidor de impressão e o nome da\n" "fila naquele servidor." #: ../../printerdrake.pm_.c:695 #, fuzzy msgid "Remote host name" msgstr "Nome do host remoto" #: ../../printerdrake.pm_.c:696 #, fuzzy msgid "Remote printer name" msgstr "Impressora remota" #: ../../printerdrake.pm_.c:699 #, fuzzy msgid "Remote host name missing!" msgstr "Nome do host remoto" #: ../../printerdrake.pm_.c:703 #, fuzzy msgid "Remote printer name missing!" msgstr "Nome do host remoto" #: ../../printerdrake.pm_.c:727 ../../printerdrake.pm_.c:1244 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "detectado %s" #: ../../printerdrake.pm_.c:805 ../../printerdrake.pm_.c:1045 #, fuzzy msgid "Scanning network..." msgstr "Iniciando sua conexão..." #: ../../printerdrake.pm_.c:814 ../../printerdrake.pm_.c:835 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:817 ../../printerdrake.pm_.c:838 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Fechando (desconectando) a rede" #: ../../printerdrake.pm_.c:858 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opções de Impressão SMB (Windows 9x/NT)" #: ../../printerdrake.pm_.c:859 #, fuzzy msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Para imprimir em uma impressora SMB, você precisa\n" "dar o nome do host SMB (Nota! Ele pode ser diferente\n" "do host TCP/IP!) e possivelmente o endereço IP do servidor de impressão,\n" "como também o nome compartilhado para a impressora que você deseja acessar " "e\n" "qualquer informação aplicável sobre nome de usuário, senha e grupo de " "trabalho." #: ../../printerdrake.pm_.c:860 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printerdrake.pm_.c:861 msgid "SMB server host" msgstr "Host servidor SMB" #: ../../printerdrake.pm_.c:862 msgid "SMB server IP" msgstr "IP do servidor SMB" #: ../../printerdrake.pm_.c:863 msgid "Share name" msgstr "Nome compartilhado" #: ../../printerdrake.pm_.c:866 msgid "Workgroup" msgstr "Grupo de trabalho" #: ../../printerdrake.pm_.c:868 #, fuzzy msgid "Auto-detected" msgstr "Usar auto detecção" #: ../../printerdrake.pm_.c:879 msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printerdrake.pm_.c:883 msgid "Samba share name missing!" msgstr "" #: ../../printerdrake.pm_.c:889 msgid "SECURITY WARNING!" msgstr "" #: ../../printerdrake.pm_.c:890 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:900 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:903 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printerdrake.pm_.c:975 msgid "NetWare Printer Options" msgstr "Opções de Impressão NetWare" #: ../../printerdrake.pm_.c:976 #, fuzzy msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Para imprimir em uma impressora NetWare, você precisar dar o\n" "nome do servidor de impressão NetWare (Nota! ele pode ser diferente\n" "do host TCP/IP!) como também o nome da fila de impressão para a impressora\n" "que você deseja acessar como qualquer nome de usuário e senha aplicável." #: ../../printerdrake.pm_.c:977 msgid "Printer Server" msgstr "Servidor de Impressão" #: ../../printerdrake.pm_.c:978 msgid "Print Queue Name" msgstr "Nome da Fila de Impressão" #: ../../printerdrake.pm_.c:983 msgid "NCP server name missing!" msgstr "" #: ../../printerdrake.pm_.c:987 msgid "NCP queue name missing!" msgstr "" #: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1074 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:1057 ../../printerdrake.pm_.c:1077 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:1097 #, fuzzy msgid "TCP/Socket Printer Options" msgstr "Opções da Impressora Socket" #: ../../printerdrake.pm_.c:1099 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" #: ../../printerdrake.pm_.c:1100 #, fuzzy msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Para imprimir em uma impressora socket, você precisa prover\n" "o nome do host da impressora e a número da porta (opcional)." #: ../../printerdrake.pm_.c:1105 #, fuzzy msgid "Printer host name or IP missing!" msgstr "Nome do host da impressora" #: ../../printerdrake.pm_.c:1127 #, fuzzy msgid "Printer host name or IP" msgstr "Nome do host da impressora" #: ../../printerdrake.pm_.c:1177 ../../printerdrake.pm_.c:1179 msgid "Printer Device URI" msgstr "Dispositivo de Impressão URI" #: ../../printerdrake.pm_.c:1178 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printerdrake.pm_.c:1193 msgid "A valid URI must be entered!" msgstr "" #: ../../printerdrake.pm_.c:1560 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printerdrake.pm_.c:1561 msgid "Name of printer" msgstr "Nome da impressora" #: ../../printerdrake.pm_.c:1563 msgid "Location" msgstr "Lugar" #: ../../printerdrake.pm_.c:1575 ../../printerdrake.pm_.c:1697 #, fuzzy msgid "Reading printer database..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:1579 #, fuzzy msgid "Preparing printer database..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:1676 #, fuzzy msgid "Your printer model" msgstr "Impressora remota" #: ../../printerdrake.pm_.c:1677 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printerdrake.pm_.c:1682 ../../printerdrake.pm_.c:1685 #, fuzzy msgid "The model is correct" msgstr "Isto está correto?" #: ../../printerdrake.pm_.c:1683 ../../printerdrake.pm_.c:1684 #: ../../printerdrake.pm_.c:1687 #, fuzzy msgid "Select model manually" msgstr "Impressora remota" #: ../../printerdrake.pm_.c:1704 #, fuzzy msgid "Printer model selection" msgstr "Conexão da Impressora" #: ../../printerdrake.pm_.c:1705 #, fuzzy msgid "Which printer model do you have?" msgstr "Qual tipo de impressora você tem?" #: ../../printerdrake.pm_.c:1706 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" #: ../../printerdrake.pm_.c:1709 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printerdrake.pm_.c:1786 #, fuzzy msgid "OKI winprinter configuration" msgstr "Configuração da Internet" #: ../../printerdrake.pm_.c:1787 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1857 #, fuzzy msgid "Lexmark inkjet configuration" msgstr "Configuração da Internet" #: ../../printerdrake.pm_.c:1831 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printerdrake.pm_.c:1858 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printerdrake.pm_.c:1861 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printerdrake.pm_.c:1862 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printerdrake.pm_.c:2085 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printerdrake.pm_.c:2094 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printerdrake.pm_.c:2098 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printerdrake.pm_.c:2103 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printerdrake.pm_.c:2142 #, fuzzy, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "Você quer testar a impressão?" #: ../../printerdrake.pm_.c:2165 #, fuzzy msgid "Test pages" msgstr "Testar portas" #: ../../printerdrake.pm_.c:2166 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printerdrake.pm_.c:2170 #, fuzzy msgid "No test pages" msgstr "Sim, imprimir ambas as páginas de teste" #: ../../printerdrake.pm_.c:2171 #, fuzzy msgid "Print" msgstr "Impressora" #: ../../printerdrake.pm_.c:2228 #, fuzzy msgid "Standard test page" msgstr "Padrão" #: ../../printerdrake.pm_.c:2231 msgid "Alternative test page (Letter)" msgstr "" #: ../../printerdrake.pm_.c:2234 #, fuzzy msgid "Alternative test page (A4)" msgstr "Imprimindo página(s) de teste..." #: ../../printerdrake.pm_.c:2236 #, fuzzy msgid "Photo test page" msgstr "Imprimindo página(s) de teste..." #: ../../printerdrake.pm_.c:2240 #, fuzzy msgid "Do not print any test page" msgstr "Imprimindo página(s) de teste..." #: ../../printerdrake.pm_.c:2249 ../../printerdrake.pm_.c:2402 msgid "Printing test page(s)..." msgstr "Imprimindo página(s) de teste..." #: ../../printerdrake.pm_.c:2274 #, fuzzy, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "A pagina de teste foi mandado ao demónio de impressão,\n" "pode demorar um pouco até a impressora começar.\n" "Estado da impressão:\n" "%s\n" "\n" "A impressão funcionou corretamente?" #: ../../printerdrake.pm_.c:2278 #, fuzzy msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "A pagina de teste foi mandado ao demónio de impressão,\n" "pode demorar um pouco até a impressora começar.\n" "A impressão funcionou corretamente?" #: ../../printerdrake.pm_.c:2285 msgid "Did it work properly?" msgstr "" #: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:3473 #, fuzzy msgid "Raw printer" msgstr "Nenhuma impressora" #: ../../printerdrake.pm_.c:2333 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printerdrake.pm_.c:2335 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2355 #: ../../printerdrake.pm_.c:2365 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printerdrake.pm_.c:2341 ../../printerdrake.pm_.c:2381 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2345 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2360 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printerdrake.pm_.c:2352 ../../printerdrake.pm_.c:2362 #: ../../printerdrake.pm_.c:2372 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2357 ../../printerdrake.pm_.c:2367 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printerdrake.pm_.c:2370 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:2374 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printerdrake.pm_.c:2378 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:2388 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Fechando (desconectando) a rede" #: ../../printerdrake.pm_.c:2389 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Fechando (desconectando) a rede" #: ../../printerdrake.pm_.c:2391 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Fechando (desconectando) a rede" #: ../../printerdrake.pm_.c:2392 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Fechando (desconectando) a rede" #: ../../printerdrake.pm_.c:2395 ../../printerdrake.pm_.c:2398 #: ../../printerdrake.pm_.c:2399 ../../printerdrake.pm_.c:2400 #: ../../printerdrake.pm_.c:3457 ../../standalone/drakTermServ_.c:248 #: ../../standalone/drakbackup_.c:1562 ../../standalone/drakbackup_.c:4210 #: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705 #: ../../standalone/drakfont_.c:1014 msgid "Close" msgstr "Fechar" #: ../../printerdrake.pm_.c:2398 #, fuzzy msgid "Print option list" msgstr "Opções da impressora" #: ../../printerdrake.pm_.c:2418 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printerdrake.pm_.c:2439 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printerdrake.pm_.c:2461 ../../printerdrake.pm_.c:2927 #: ../../printerdrake.pm_.c:3227 #, fuzzy msgid "Reading printer data..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:2481 ../../printerdrake.pm_.c:2509 #: ../../printerdrake.pm_.c:2544 #, fuzzy msgid "Transfer printer configuration" msgstr "Configuração da Internet" #: ../../printerdrake.pm_.c:2482 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printerdrake.pm_.c:2485 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printerdrake.pm_.c:2487 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2489 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2491 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2492 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2493 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printerdrake.pm_.c:2496 msgid "Do not transfer printers" msgstr "" #: ../../printerdrake.pm_.c:2497 ../../printerdrake.pm_.c:2514 msgid "Transfer" msgstr "" #: ../../printerdrake.pm_.c:2510 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printerdrake.pm_.c:2518 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "O nome da impressora deve conter apenas letras, números e o símbolo _" #: ../../printerdrake.pm_.c:2523 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printerdrake.pm_.c:2531 #, fuzzy msgid "New printer name" msgstr "Nenhuma impressora" #: ../../printerdrake.pm_.c:2534 #, c-format msgid "Transferring %s..." msgstr "" #: ../../printerdrake.pm_.c:2545 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printerdrake.pm_.c:2555 #, fuzzy msgid "Refreshing printer data..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:2563 ../../printerdrake.pm_.c:2638 #: ../../printerdrake.pm_.c:2650 msgid "Configuration of a remote printer" msgstr "" #: ../../printerdrake.pm_.c:2564 #, fuzzy msgid "Starting network..." msgstr "Iniciando sua conexão..." #: ../../printerdrake.pm_.c:2599 ../../printerdrake.pm_.c:2603 #: ../../printerdrake.pm_.c:2605 #, fuzzy msgid "Configure the network now" msgstr "Configurar rede" #: ../../printerdrake.pm_.c:2600 #, fuzzy msgid "Network functionality not configured" msgstr "Monitor não configurado" #: ../../printerdrake.pm_.c:2601 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printerdrake.pm_.c:2604 #, fuzzy msgid "Go on without configuring the network" msgstr "Configurando rede" #: ../../printerdrake.pm_.c:2640 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printerdrake.pm_.c:2641 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printerdrake.pm_.c:2651 #, fuzzy msgid "Restarting printing system..." msgstr "Qual sistema de impressão você quer usar?" #: ../../printerdrake.pm_.c:2689 #, fuzzy msgid "high" msgstr "Alto" #: ../../printerdrake.pm_.c:2689 #, fuzzy msgid "paranoid" msgstr "Paranóico" #: ../../printerdrake.pm_.c:2690 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printerdrake.pm_.c:2691 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printerdrake.pm_.c:2723 #, fuzzy msgid "Starting the printing system at boot time" msgstr "Qual sistema de impressão você quer usar?" #: ../../printerdrake.pm_.c:2724 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printerdrake.pm_.c:2748 ../../printerdrake.pm_.c:2793 #: ../../printerdrake.pm_.c:2832 ../../printerdrake.pm_.c:2874 #: ../../printerdrake.pm_.c:2995 msgid "Checking installed software..." msgstr "" #: ../../printerdrake.pm_.c:2798 msgid "Removing LPRng..." msgstr "" #: ../../printerdrake.pm_.c:2837 msgid "Removing LPD..." msgstr "" #: ../../printerdrake.pm_.c:2910 #, fuzzy msgid "Select Printer Spooler" msgstr "Selecionar Coneção da Impressora" #: ../../printerdrake.pm_.c:2911 #, fuzzy msgid "Which printing system (spooler) do you want to use?" msgstr "Qual sistema de impressão você quer usar?" #: ../../printerdrake.pm_.c:2947 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Configurar Impressora" #: ../../printerdrake.pm_.c:2961 #, fuzzy msgid "Installing Foomatic..." msgstr "Instalando pacote %s" #: ../../printerdrake.pm_.c:3031 ../../printerdrake.pm_.c:3072 #: ../../printerdrake.pm_.c:3474 ../../printerdrake.pm_.c:3547 msgid "Printer options" msgstr "Opções da impressora" #: ../../printerdrake.pm_.c:3041 #, fuzzy msgid "Preparing Printerdrake..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:3059 ../../printerdrake.pm_.c:3637 #, fuzzy msgid "Configuring applications..." msgstr "Configurar Impressora" #: ../../printerdrake.pm_.c:3079 #, fuzzy msgid "Would you like to configure printing?" msgstr "Você gostaria de configurar uma impressora?" #: ../../printerdrake.pm_.c:3091 msgid "Printing system: " msgstr "" #: ../../printerdrake.pm_.c:3151 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" "Aqui estão as filas de impressão.\n" "Você pode adicionar mais ou modificar as existentes." #: ../../printerdrake.pm_.c:3152 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Aqui estão as filas de impressão.\n" "Você pode adicionar mais ou modificar as existentes." #: ../../printerdrake.pm_.c:3179 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printerdrake.pm_.c:3197 #, fuzzy msgid "Change the printing system" msgstr "Configurar rede" #: ../../printerdrake.pm_.c:3202 ../../standalone/drakconnect_.c:277 msgid "Normal Mode" msgstr "Modo Normal" #: ../../printerdrake.pm_.c:3367 ../../printerdrake.pm_.c:3417 #: ../../printerdrake.pm_.c:3630 #, fuzzy msgid "Do you want to configure another printer?" msgstr "Você quer testar a configuração?" #: ../../printerdrake.pm_.c:3452 #, fuzzy msgid "Modify printer configuration" msgstr "Configuração da Internet" #: ../../printerdrake.pm_.c:3454 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "Você quer testar a configuração?" #: ../../printerdrake.pm_.c:3458 msgid "Do it!" msgstr "" #: ../../printerdrake.pm_.c:3463 ../../printerdrake.pm_.c:3518 #, fuzzy msgid "Printer connection type" msgstr "Compartilhamento da Conexão à Internet" #: ../../printerdrake.pm_.c:3464 ../../printerdrake.pm_.c:3522 #, fuzzy msgid "Printer name, description, location" msgstr "Conexão da Impressora" #: ../../printerdrake.pm_.c:3466 ../../printerdrake.pm_.c:3540 msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printerdrake.pm_.c:3467 ../../printerdrake.pm_.c:3541 msgid "Printer manufacturer, model" msgstr "" #: ../../printerdrake.pm_.c:3476 ../../printerdrake.pm_.c:3551 msgid "Set this printer as the default" msgstr "" #: ../../printerdrake.pm_.c:3478 ../../printerdrake.pm_.c:3556 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printerdrake.pm_.c:3479 ../../printerdrake.pm_.c:3565 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printerdrake.pm_.c:3480 ../../printerdrake.pm_.c:3574 #, fuzzy msgid "Print test pages" msgstr "Imprimindo página(s) de teste..." #: ../../printerdrake.pm_.c:3481 ../../printerdrake.pm_.c:3576 #, fuzzy msgid "Know how to use this printer" msgstr "Você quer testar a configuração?" #: ../../printerdrake.pm_.c:3483 ../../printerdrake.pm_.c:3578 #, fuzzy msgid "Remove printer" msgstr "Impressora remota" #: ../../printerdrake.pm_.c:3529 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../printerdrake.pm_.c:3554 #, fuzzy msgid "Default printer" msgstr "Impressora local" #: ../../printerdrake.pm_.c:3555 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printerdrake.pm_.c:3559 ../../printerdrake.pm_.c:3562 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printerdrake.pm_.c:3560 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printerdrake.pm_.c:3563 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printerdrake.pm_.c:3568 ../../printerdrake.pm_.c:3571 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printerdrake.pm_.c:3569 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printerdrake.pm_.c:3572 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printerdrake.pm_.c:3580 #, fuzzy, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Você quer reiniciar a rede" #: ../../printerdrake.pm_.c:3584 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 #, fuzzy msgid "Proxy configuration" msgstr "Configuração de proxies" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 msgid "URL" msgstr "" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 #, fuzzy msgid "port" msgstr "Porta" #: ../../proxy.pm_.c:44 #, fuzzy msgid "Url should begin with 'http:'" msgstr "O proxy deve ser http://..." #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 #, fuzzy msgid "The port part should be numeric" msgstr "O número da porta deve ser numérico" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" #: ../../proxy.pm_.c:80 #, fuzzy msgid "login" msgstr "Autologin" #: ../../proxy.pm_.c:82 #, fuzzy msgid "password" msgstr "Senha" #: ../../proxy.pm_.c:84 #, fuzzy msgid "re-type password" msgstr "Nenhuma senha" #: ../../proxy.pm_.c:88 #, fuzzy msgid "The passwords don't match. Try again!" msgstr "As senhas não conferem" #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Não posso adicionar partição ao RAID _formatado_ md%d" #: ../../raid.pm_.c:108 #, c-format msgid "Can't write file %s" msgstr "Não posso gravar arquivo %s" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid falhou" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid falhou (talvez o raidtools esteja faltando)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Sem partições suficientes para RAID nível %d\n" #: ../../security/main.pm_.c:35 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" #: ../../security/main.pm_.c:65 #, fuzzy msgid "Security Level:" msgstr "Nível de segurança" #: ../../security/main.pm_.c:99 #, fuzzy msgid "Security Alerts:" msgstr "Nível de segurança" #: ../../security/main.pm_.c:101 #, fuzzy msgid "Security Administrator:" msgstr "Opções da impressora lpd Remota" #: ../../security/main.pm_.c:114 #, fuzzy msgid "Network Options" msgstr "Opções do módulo:" #: ../../security/main.pm_.c:114 #, fuzzy msgid "System Options" msgstr "Opções do módulo:" #: ../../security/main.pm_.c:119 ../../security/main.pm_.c:148 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" #: ../../security/main.pm_.c:137 #, fuzzy, c-format msgid " (default: %s)" msgstr " (Default)" #: ../../security/main.pm_.c:161 msgid "Periodic Checks 2" msgstr "" #: ../../security/main.pm_.c:162 msgid "Periodic Checks" msgstr "" #: ../../security/main.pm_.c:176 #, fuzzy msgid "Please wait, setting security level..." msgstr "Opções do nível de segurança" #: ../../security/main.pm_.c:182 #, fuzzy msgid "Please wait, setting security options..." msgstr "Por favor aguarde, preparando instalação" #: ../../services.pm_.c:14 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Iniciar o sistema de som ALSA (Arquitetura Avançada de Som Linux)" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "Anacron, um agendador de comando periódicos" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd é usado para monitarar o estado da bateria e gravando-o via syslog.\n" "Ele também pode ser usado para desligar a máquina quando a bateria estiver " "fraca." #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Executa comando agendados pelo comando at na hora especificado quando\n" "at estava rodando, e executa comandos grupos de comandos quando o uso de " "memória estiver baixo o suficiente." #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron é um program UNIX padrão que executa progrmas especificados pelo\n" "usuaio em horas marcadas. vixie cron adiciona várias características ao " "UNIX\n" "cron básico, incluindo melhor segurança e melhores opções de configuração." #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM adiciona suporte ao mouse à aplicativos Linux com base em texto\n" "tal como o Midnight Commander. Ele também permitir copiar e colar " "utilizando\n" "o mouse e inclui suporte para menus pop-up no console." #: ../../services.pm_.c:26 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake executa uma detecção do hardware existente, e\n" "opcionalmente configura um novo/alterado hardware." #: ../../services.pm_.c:28 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache é um servidor World Wide Web. Ele é usado para servir arquivos\n" "HTML e CGI." #: ../../services.pm_.c:29 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "O internet superserver daemon (normalmente chamado inetd) inicia\n" "uma variedade de outros serviços de internet quando necessário. É " "responsável\n" "pela inicialização de vários serviços, incluindo telnet, ftp, rsh e rlogin. " "Disabilitando\n" "inetd, todos os serviços pela qual ele é responsável também são " "desabilitados." #: ../../services.pm_.c:33 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Iniciar filtro de pacots para kernel Linux série 2.2, para criar\n" "um firewall para proteger sua máquina de ataques de rede." #: ../../services.pm_.c:35 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Esse pacote carrega o mapa de teclado selecionado como\n" "um comando em /etc/sysconfig/keyboard. Isso pode ser selecionado usando o\n" "utilitário kbdconfig. Você deve deixar isso ativar para a maioria da " "máquinas." #: ../../services.pm_.c:38 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Regeneração automática do heador do kernel no /boot para\n" "/usr/include/linux{autoconf,version}.h" #: ../../services.pm_.c:40 msgid "Automatic detection and configuration of hardware at boot." msgstr "Detecção e configuração automática do hardware na inicialização." #: ../../services.pm_.c:41 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf irá periodicamente executar várias tarefas durante a\n" "inicialização para manter a configuração do sistema" #: ../../services.pm_.c:43 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd é o daemon de impressão requerido para o lpr funcionar corretamente.\n" "Ele é basicamente um servidor que organiza os trabalhos à(s) impressora(s)." #: ../../services.pm_.c:45 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Servidor Virtual Linux, utilizado para criar um servidor de alta\n" "performance e alta acessibilidade." #: ../../services.pm_.c:47 #, fuzzy msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) é um Servidor de Nome de Domínio (DNS) que é usado para\n" "transformar nome de hosts para endereços IP." #: ../../services.pm_.c:48 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Monta e desmonta todos os pontos de montagem do Network File\n" "System (NFS), SMB (Gerenciador de Rede/Windows) e NCP (NetWare)." #: ../../services.pm_.c:50 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Ativa/Desativa todas as interfaces de rede configuradas para iniciar\n" "na hora de inicialização." #: ../../services.pm_.c:52 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS é um protocolo popular usado no compartilhamento de arquivos através\n" "de redes TCP/IP. Esse serviço provê a funcionalidade do servidor NFS, que é " "configurado através do arquivo /etc/exports." #: ../../services.pm_.c:55 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS é um protocolo popular usado para compartilhar arquivos através de\n" "redes TCP/IP. Esse serviço provê a funcionalidade de trava de arquivos NFS." #: ../../services.pm_.c:57 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Automaticamente ativa o Num Lock no console e XFree\n" "durante a inicialização." #: ../../services.pm_.c:59 msgid "Support the OKI 4w and compatible winprinters." msgstr "Suporte para impressoras OKI-4w e compatíveis." #: ../../services.pm_.c:60 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "Suporte PCMCIA é utilizado normalmente para suportar coisas como\n" "ethernet ou modems em laptops. Ele não será iniciado a não ser que " "estejaconfigurado,\n" "então é seguro te-lo instalado em máquinas que não precisam dele." #: ../../services.pm_.c:63 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "O portmapper gerencia conexões RPC, que são usadas por\n" "protocolos como NFS ou NIS. O servidor portmap deve estar rodando em " "máquinas\n" "que serão os servidores para os protocolos que utilizam o mecanismo RPC." #: ../../services.pm_.c:66 #, fuzzy msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix é um Agente de Transporte de Correio, que é um programa\n" "que move mensagens entre uma máquina e outra." #: ../../services.pm_.c:67 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Salva e restaura o entropy pool do sistema para melhor qualidade\n" "na geração randômica de número." #: ../../services.pm_.c:69 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "Determinar dispositivos raw como dispositovs de bloco\n" "(como partições), para o uso em aplicativos como o Oracle" #: ../../services.pm_.c:71 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "O daemon routed permite a atualização automática da tabela roteadora\n" "IP através do protocolo RIP. Enquanto o RIP é usado largamente em pequenas\n" "rede, protocolos de roteamento mais complexos são necessários em redes mais " "complexas." #: ../../services.pm_.c:74 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "O protcolo rstat permite que usários da rede recebam\n" "informações sobre a perfomance de qualquer máquina na rede." #: ../../services.pm_.c:76 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "O protocolo rusers pertmite que os usuários da rede identifiquem\n" "quem está logado na máquina correspondente do outro." #: ../../services.pm_.c:78 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "O protocolo rwho permite que usuários remotos peguem uma lista de todos os\n" "usuários logados em uma máquina rodando o daemon rwho (similar ao finger)." #: ../../services.pm_.c:80 msgid "Launch the sound system on your machine" msgstr "Iniciar o sistema de som da sua máquina" #: ../../services.pm_.c:81 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog é um aparato que muitos daemons usam para gravar mensagens\n" "em vários arquivos de log. É uma boa idéia sempre rodar o syslog." #: ../../services.pm_.c:83 msgid "Load the drivers for your usb devices." msgstr "Carrega os drivers para seus dispositivos usb." #: ../../services.pm_.c:84 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Inicia o Servidor de Fontes X (é obrigatório para a execução do XFree)." #: ../../services.pm_.c:110 ../../services.pm_.c:152 msgid "Choose which services should be automatically started at boot time" msgstr "" "Escolha quais serviços devem ser inicializados automaticamente na " "inicalização" #: ../../services.pm_.c:122 #, fuzzy msgid "Printing" msgstr "Impressora" #: ../../services.pm_.c:123 msgid "Internet" msgstr "Internet" #: ../../services.pm_.c:126 msgid "File sharing" msgstr "" #: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1746 #, fuzzy msgid "System" msgstr "Modo do sistema" #: ../../services.pm_.c:133 #, fuzzy msgid "Remote Administration" msgstr "Opções da impressora lpd Remota" #: ../../services.pm_.c:141 #, fuzzy msgid "Database Server" msgstr "Servidor, Bancos de dados" #: ../../services.pm_.c:170 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../services.pm_.c:186 #, fuzzy msgid "Services" msgstr "dispositivo" #: ../../services.pm_.c:198 msgid "running" msgstr "iniciado" #: ../../services.pm_.c:198 msgid "stopped" msgstr "parado" #: ../../services.pm_.c:212 msgid "Services and deamons" msgstr "Serviços e daemons" #: ../../services.pm_.c:217 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Nenhuma informação adicional\n" "sobre este serviço, desculpe." #: ../../services.pm_.c:224 msgid "On boot" msgstr "No boot" #: ../../services.pm_.c:236 #, fuzzy msgid "Start" msgstr "Status:" #: ../../services.pm_.c:236 #, fuzzy msgid "Stop" msgstr "Setor" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "" #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "" #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/02-community.pl_.c:9 #, fuzzy msgid "Get involved in the Free Software world" msgstr "Resto do mundo" #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" #: ../../share/advertising/03-internet.pl_.c:9 #, fuzzy msgid "Get the most from the Internet" msgstr "Conectar à Internet" #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "Jogos" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "" #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:69 #, fuzzy msgid "Mandrake Control Center" msgstr "Centro de Controle" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "" #: ../../share/advertising/07-desktop.pl_.c:9 #, fuzzy msgid "User interfaces" msgstr "Interface de rede" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" #: ../../share/advertising/08-development.pl_.c:9 #, fuzzy msgid "Development simplified" msgstr "Desenvolvimento" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:9 #, fuzzy msgid "Become a MandrakeExpert" msgstr "Expert" #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 #, fuzzy msgid "MandrakeExpert Corporate" msgstr "Expert" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" #: ../../standalone.pm_.c:49 #, fuzzy msgid "Installing packages..." msgstr "Instalando pacote %s" #: ../../standalone/XFdrake_.c:148 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" "Favor fazer um log out (sair) e então usar as teclas Ctrl-Alt-BackSpace" #: ../../standalone/XFdrake_.c:152 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Favor relogar em %s para ativar as mudanças" #: ../../standalone/drakTermServ_.c:188 #, fuzzy msgid "Mandrake Terminal Server Configuration" msgstr "Configuração da Internet" #: ../../standalone/drakTermServ_.c:203 #, fuzzy msgid "Enable Server" msgstr "Servidor, Bancos de dados" #: ../../standalone/drakTermServ_.c:210 #, fuzzy msgid "Disable Server" msgstr "Servidor, Bancos de dados" #: ../../standalone/drakTermServ_.c:218 #, fuzzy msgid "Start Server" msgstr "Servidor NIS" #: ../../standalone/drakTermServ_.c:225 #, fuzzy msgid "Stop Server" msgstr "Servidor NIS" #: ../../standalone/drakTermServ_.c:233 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:235 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:239 #, fuzzy msgid "Add/Del Users" msgstr "Adicionar usuário" #: ../../standalone/drakTermServ_.c:241 #, fuzzy msgid "Add/Del Clients" msgstr "Cliente DHCP" #: ../../standalone/drakTermServ_.c:436 msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ_.c:438 msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ_.c:507 msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ_.c:509 ../../standalone/drakTermServ_.c:539 msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ_.c:521 msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ_.c:524 msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ_.c:535 #, fuzzy msgid "No nic selected!" msgstr "Não conectado" #: ../../standalone/drakTermServ_.c:538 msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ_.c:552 #, fuzzy msgid "<-- Delete" msgstr "Deletar" #: ../../standalone/drakTermServ_.c:559 #, fuzzy msgid "Delete All NBIs" msgstr "Selecione arquivo" #: ../../standalone/drakTermServ_.c:621 #, fuzzy msgid "Add User -->" msgstr "Adicionar usuário" #: ../../standalone/drakTermServ_.c:629 msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ_.c:694 msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ_.c:710 msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ_.c:742 #, fuzzy msgid "<-- Del Client" msgstr "Cliente DHCP" #: ../../standalone/drakTermServ_.c:748 #, fuzzy msgid "dhcpd Config..." msgstr "Configurando..." #: ../../standalone/drakTermServ_.c:873 #, fuzzy msgid "dhcpd Server Configuration" msgstr "Configuração LAN" #: ../../standalone/drakTermServ_.c:874 msgid "" "Most of these values were extracted\n" "from your running system. You can modify as needed." msgstr "" #: ../../standalone/drakTermServ_.c:875 #, fuzzy msgid "Write Config" msgstr "reconfigurar" #: ../../standalone/drakTermServ_.c:965 #, fuzzy msgid "Please insert floppy disk:" msgstr "Insira um disquete no drive %s" #: ../../standalone/drakTermServ_.c:969 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:971 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:974 #, fuzzy msgid "No floppy drive available!" msgstr "Nenhum drive de disquete disponível" #: ../../standalone/drakTermServ_.c:983 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ_.c:985 msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ_.c:1004 msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakautoinst_.c:43 #, fuzzy msgid "Error!" msgstr "Erro" #: ../../standalone/drakautoinst_.c:44 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst_.c:46 #, fuzzy msgid "Auto Install Configurator" msgstr "Configuração pós-instalação" #: ../../standalone/drakautoinst_.c:47 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst_.c:69 #, fuzzy msgid "Automatic Steps Configuration" msgstr "Configuração do estilo de inicialização" #: ../../standalone/drakautoinst_.c:70 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst_.c:81 ../../standalone/drakautoinst_.c:82 #, fuzzy msgid "Creating auto install floppy" msgstr "Criando disquete de auto instalação" #: ../../standalone/drakautoinst_.c:144 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:508 #: ../../standalone/scannerdrake_.c:119 msgid "Congratulations!" msgstr "Parabéns!" #: ../../standalone/drakautoinst_.c:240 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst_.c:278 #, fuzzy msgid "Auto Install" msgstr "Instalar" #: ../../standalone/drakautoinst_.c:348 #, fuzzy msgid "Add an item" msgstr "Adicionar um usuário" #: ../../standalone/drakautoinst_.c:355 #, fuzzy msgid "Remove the last item" msgstr "Formatando arquivo loopback %s" #: ../../standalone/drakbackup_.c:617 msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakbackup_.c:723 msgid "WARNING" msgstr "" #: ../../standalone/drakbackup_.c:724 #, fuzzy msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup_.c:725 msgid "INFO" msgstr "" #: ../../standalone/drakbackup_.c:737 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:738 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:742 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:763 ../../standalone/drakbackup_.c:836 #: ../../standalone/drakbackup_.c:891 #, fuzzy msgid "Total progess" msgstr "Testar portas" #: ../../standalone/drakbackup_.c:818 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup_.c:827 msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup_.c:834 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup_.c:851 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup_.c:852 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Nenhuma senha" #: ../../standalone/drakbackup_.c:853 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup_.c:854 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "Não foi possível abrir %s: %s\n" #: ../../standalone/drakbackup_.c:857 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup_.c:861 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup_.c:905 msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup_.c:909 msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup_.c:930 msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup_.c:934 msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup_.c:938 msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup_.c:977 msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup_.c:1062 msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup_.c:1089 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup_.c:1201 ../../standalone/drakbackup_.c:1250 msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup_.c:1251 ../../standalone/drakbackup_.c:1318 #, fuzzy msgid "Hard Disk Backup files..." msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1263 #, fuzzy msgid "Backup User files..." msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1264 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:1317 #, fuzzy msgid "Backup Other files..." msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1323 #, fuzzy msgid "No changes to backup!" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1339 ../../standalone/drakbackup_.c:1362 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1346 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:1349 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1367 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1372 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1381 #, fuzzy msgid " Error during mail sending. \n" msgstr "Erro lendo arquivo %s" #: ../../standalone/drakbackup_.c:1406 msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup_.c:1519 ../../standalone/drakbackup_.c:1530 #: ../../standalone/drakfont_.c:1004 #, fuzzy msgid "File Selection" msgstr "Seleção de Grupo de Pacotes" #: ../../standalone/drakbackup_.c:1558 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:1602 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:1603 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:1604 #, fuzzy msgid "Backup your System files. (/etc directory)" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1605 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1606 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:1607 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:1624 #, fuzzy msgid "Please check all users that you want to include in your backup." msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:1651 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:1652 ../../standalone/drakbackup_.c:1676 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1674 ../../standalone/drakfont_.c:1058 #, fuzzy msgid "Remove Selected" msgstr "Fila remota" #: ../../standalone/drakbackup_.c:1712 #, fuzzy msgid "Windows (FAT32)" msgstr "Remover Windows(TM)" #: ../../standalone/drakbackup_.c:1751 #, fuzzy msgid "Users" msgstr "Nome do usuário" #: ../../standalone/drakbackup_.c:1777 #, fuzzy msgid "Use network connection to backup" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:1779 msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup_.c:1783 msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1784 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1785 msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup_.c:1786 msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup_.c:1790 #, fuzzy msgid "Please enter the host name or IP." msgstr "Favor testar o mouse" #: ../../standalone/drakbackup_.c:1795 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:1800 #, fuzzy msgid "Please enter your login" msgstr "Favor tentar novamente" #: ../../standalone/drakbackup_.c:1805 #, fuzzy msgid "Please enter your password" msgstr "Favor tentar novamente" #: ../../standalone/drakbackup_.c:1811 #, fuzzy msgid "Remember this password" msgstr "Nenhuma senha" #: ../../standalone/drakbackup_.c:1822 msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup_.c:1917 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1920 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup_.c:1925 #, fuzzy msgid "Please choose your CD/DVD media size (Mb)" msgstr "Favor escolher o layout do seu teclado." #: ../../standalone/drakbackup_.c:1931 #, fuzzy msgid "Please check for multisession CD" msgstr "Favor clicar em uma partição" #: ../../standalone/drakbackup_.c:1937 #, fuzzy msgid "Please check if you are using CDRW media" msgstr "Favor clicar em uma partição" #: ../../standalone/drakbackup_.c:1943 #, fuzzy msgid "Please check if you want to erase your RW media (1st Session)" msgstr "Favor clicar em uma partição" #: ../../standalone/drakbackup_.c:1944 msgid " Erase Now " msgstr "" #: ../../standalone/drakbackup_.c:1950 #, fuzzy msgid "Please check if you are using a DVDR device" msgstr "Favor clicar em uma partição" #: ../../standalone/drakbackup_.c:1956 #, fuzzy msgid "Please check if you are using a DVDRAM device" msgstr "Favor clicar em uma partição" #: ../../standalone/drakbackup_.c:1969 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:2002 #, fuzzy msgid "No CD device defined!" msgstr "Selecione arquivo" #: ../../standalone/drakbackup_.c:2050 #, fuzzy msgid "Use tape to backup" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:2053 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:2059 #, fuzzy msgid "Please check if you want to use the non-rewinding device." msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2065 #, fuzzy msgid "Please check if you want to erase your tape before the backup." msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2071 #, fuzzy msgid "Please check if you want to eject your tape after the backup." msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2077 ../../standalone/drakbackup_.c:2151 #: ../../standalone/drakbackup_.c:3118 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:2142 #, fuzzy msgid "Please enter the directory to save to:" msgstr "Favor testar o mouse" #: ../../standalone/drakbackup_.c:2157 ../../standalone/drakbackup_.c:3124 #, fuzzy msgid "Use quota for backup files." msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:2223 #, fuzzy msgid "Network" msgstr "Interface de rede" #: ../../standalone/drakbackup_.c:2228 msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup_.c:2233 msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup_.c:2238 #, fuzzy msgid "Tape" msgstr "Tipo" #: ../../standalone/drakbackup_.c:2252 ../../standalone/drakbackup_.c:2256 #: ../../standalone/drakbackup_.c:2260 msgid "hourly" msgstr "" #: ../../standalone/drakbackup_.c:2253 ../../standalone/drakbackup_.c:2257 #: ../../standalone/drakbackup_.c:2260 msgid "daily" msgstr "" #: ../../standalone/drakbackup_.c:2254 ../../standalone/drakbackup_.c:2258 #: ../../standalone/drakbackup_.c:2260 msgid "weekly" msgstr "" #: ../../standalone/drakbackup_.c:2255 ../../standalone/drakbackup_.c:2259 #: ../../standalone/drakbackup_.c:2260 msgid "monthly" msgstr "" #: ../../standalone/drakbackup_.c:2273 #, fuzzy msgid "Use daemon" msgstr "Nome do usuário" #: ../../standalone/drakbackup_.c:2278 #, fuzzy msgid "" "Please choose the time \n" "interval between each backup" msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2284 #, fuzzy msgid "" "Please choose the\n" "media for backup." msgstr "Favor escolher o idioma a ser utilizado." #: ../../standalone/drakbackup_.c:2291 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup_.c:2328 msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup_.c:2334 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup_.c:2373 msgid "What" msgstr "" #: ../../standalone/drakbackup_.c:2378 #, fuzzy msgid "Where" msgstr "Roda" #: ../../standalone/drakbackup_.c:2383 #, fuzzy msgid "When" msgstr "Roda" #: ../../standalone/drakbackup_.c:2388 #, fuzzy msgid "More Options" msgstr "Opções do módulo:" #: ../../standalone/drakbackup_.c:2407 ../../standalone/drakbackup_.c:4532 #, fuzzy msgid "Drakbackup Configuration" msgstr "Configuração da Rede" #: ../../standalone/drakbackup_.c:2425 #, fuzzy msgid "Please choose where you want to backup" msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2427 msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup_.c:2437 msgid "across Network" msgstr "" #: ../../standalone/drakbackup_.c:2447 msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup_.c:2455 msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup_.c:2498 #, fuzzy msgid "Please choose what you want to backup" msgstr "Escolha os pacotes que você quer instalar" #: ../../standalone/drakbackup_.c:2499 #, fuzzy msgid "Backup system" msgstr "Setup dos sistemas de arquivos" #: ../../standalone/drakbackup_.c:2500 msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup_.c:2503 msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup_.c:2586 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:2587 msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2589 msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2591 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2593 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2596 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup_.c:2602 msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup_.c:2603 msgid "RW" msgstr "" #: ../../standalone/drakbackup_.c:2604 #, fuzzy, c-format msgid " on device: %s" msgstr "Dispositivo do mouse: %s\n" #: ../../standalone/drakbackup_.c:2605 msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup_.c:2606 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup_.c:2607 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup_.c:2610 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2611 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:2612 #, fuzzy msgid "" "\n" "- Options:\n" msgstr "Opções" #: ../../standalone/drakbackup_.c:2613 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:2616 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:2618 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:2621 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup_.c:2622 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:2623 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:2624 msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup_.c:2625 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:2626 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:2627 msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup_.c:2628 msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup_.c:2630 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:2636 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2803 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2805 #, fuzzy msgid "Please uncheck or remove it on next time." msgstr "Favor escolher em qual porta serial seu modem está conectado." #: ../../standalone/drakbackup_.c:2815 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:2836 msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup_.c:2837 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:2955 #, fuzzy msgid " Restore Configuration " msgstr "Configuração da Rede" #: ../../standalone/drakbackup_.c:2973 msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup_.c:2990 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:3068 #, fuzzy msgid "Backup the system files before:" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:3070 #, fuzzy msgid "please choose the date to restore" msgstr "Favor escolher o tipo do seu mouse." #: ../../standalone/drakbackup_.c:3107 #, fuzzy msgid "Use Hard Disk to backup" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:3110 #, fuzzy msgid "Please enter the directory to save:" msgstr "Favor testar o mouse" #: ../../standalone/drakbackup_.c:3153 #, fuzzy msgid "FTP Connection" msgstr "Coneção LAN" #: ../../standalone/drakbackup_.c:3160 #, fuzzy msgid "Secure Connection" msgstr "Selecionar Coneção da Impressora" #: ../../standalone/drakbackup_.c:3186 #, fuzzy msgid "Restore from Hard Disk." msgstr "Restaurar do disquete" #: ../../standalone/drakbackup_.c:3188 msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup_.c:3256 #, fuzzy msgid "Select another media to restore from" msgstr "Favor escolher o tipo do seu mouse." #: ../../standalone/drakbackup_.c:3258 #, fuzzy msgid "Other Media" msgstr "Outro" #: ../../standalone/drakbackup_.c:3263 #, fuzzy msgid "Restore system" msgstr "Instalar sistema" #: ../../standalone/drakbackup_.c:3264 #, fuzzy msgid "Restore Users" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3265 #, fuzzy msgid "Restore Other" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3267 #, fuzzy msgid "select path to restore (instead of /)" msgstr "Favor escolher o tipo do seu mouse." #: ../../standalone/drakbackup_.c:3271 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:3273 msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup_.c:3386 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup_.c:3396 #, fuzzy msgid "" "Restore Selected\n" "Files" msgstr "Fila remota" #: ../../standalone/drakbackup_.c:3413 #, fuzzy msgid "" "Change\n" "Restore Path" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3479 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../standalone/drakbackup_.c:3492 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup_.c:3492 #, fuzzy msgid "Restore From CD" msgstr "Restaurar do disquete" #: ../../standalone/drakbackup_.c:3494 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3504 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup_.c:3504 #, fuzzy msgid "Restore From Tape" msgstr "Restaurar tabela de partição" #: ../../standalone/drakbackup_.c:3506 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3526 #, fuzzy msgid "Restore Via Network" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3526 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup_.c:3527 #, fuzzy msgid "Host Name" msgstr "Host name (nome do host)" #: ../../standalone/drakbackup_.c:3528 msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup_.c:3535 #, fuzzy msgid "Password required" msgstr "Senha" #: ../../standalone/drakbackup_.c:3541 #, fuzzy msgid "Username required" msgstr "Nome do usuário" #: ../../standalone/drakbackup_.c:3544 #, fuzzy msgid "Hostname required" msgstr "Hostname:" #: ../../standalone/drakbackup_.c:3549 msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup_.c:3562 msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup_.c:3565 #, fuzzy msgid "Restore Failed..." msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3803 msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup_.c:3812 #, fuzzy msgid "Custom Restore" msgstr "Personalizada" #: ../../standalone/drakbackup_.c:3858 msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup_.c:3864 msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup_.c:3867 #, fuzzy msgid "Restore From Catalog" msgstr "Restaurar tabela de partição" #: ../../standalone/drakbackup_.c:3895 #, fuzzy msgid "Restore Progress" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3970 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4023 #: ../../standalone/drakbackup_.c:4050 ../../standalone/drakbackup_.c:4110 #: ../../standalone/drakbackup_.c:4137 ../../standalone/drakbackup_.c:4167 #: ../../standalone/drakbackup_.c:4193 #, fuzzy msgid "Previous" msgstr "<- Anterior" #: ../../standalone/drakbackup_.c:3941 ../../standalone/drakbackup_.c:4027 #: ../../standalone/logdrake_.c:224 #, fuzzy msgid "Save" msgstr "Status:" #: ../../standalone/drakbackup_.c:4000 #, fuzzy msgid "Build Backup" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:4054 ../../standalone/drakbackup_.c:4634 #, fuzzy msgid "Restore" msgstr "Restaurar do arquivo" #: ../../standalone/drakbackup_.c:4233 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:4257 #, fuzzy msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "Os seguintes pacotes serão instalados" #: ../../standalone/drakbackup_.c:4280 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:4303 #, fuzzy msgid "Please select data to restore..." msgstr "Favor escolher o idioma a ser utilizado." #: ../../standalone/drakbackup_.c:4324 #, fuzzy msgid "Please select media for backup..." msgstr "Favor escolher o idioma a ser utilizado." #: ../../standalone/drakbackup_.c:4346 #, fuzzy msgid "Please select data to backup..." msgstr "Favor escolher o idioma a ser utilizado." #: ../../standalone/drakbackup_.c:4368 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:4389 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:4470 #, fuzzy msgid "Backup system files" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:4472 #, fuzzy msgid "Backup user files" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:4474 #, fuzzy msgid "Backup other files" msgstr "Arquivo de backup defeituoso" #: ../../standalone/drakbackup_.c:4476 ../../standalone/drakbackup_.c:4509 msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup_.c:4500 msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup_.c:4504 #, fuzzy msgid "Sending files..." msgstr "Salvar no arquivo" #: ../../standalone/drakbackup_.c:4590 #, fuzzy msgid "Backup Now from configuration file" msgstr "Configuração da Rede" #: ../../standalone/drakbackup_.c:4595 #, fuzzy msgid "View Backup Configuration." msgstr "Configuração da Rede" #: ../../standalone/drakbackup_.c:4616 #, fuzzy msgid "Wizard Configuration" msgstr "Configuração LAN" #: ../../standalone/drakbackup_.c:4621 #, fuzzy msgid "Advanced Configuration" msgstr "Configuração LAN" #: ../../standalone/drakbackup_.c:4626 #, fuzzy msgid "Backup Now" msgstr "Setup dos sistemas de arquivos" #: ../../standalone/drakbackup_.c:4660 msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:4711 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4741 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4749 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4788 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4814 ../../standalone/drakbackup_.c:4891 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup_.c:4816 ../../standalone/drakbackup_.c:4893 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup_.c:4818 ../../standalone/drakbackup_.c:4895 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: ../../standalone/drakbackup_.c:4832 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4870 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4879 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup_.c:4909 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, Drakbackup will remove\n" " your original directory and verify that all\n" " backup files are not corrupted. It is recommended\n" " you do a last backup before restoring.\n" " \n" "\n" msgstr "" #: ../../standalone/drakboot_.c:57 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "A Instalação do %s falhou. Ocorreram os seguintes erros:" #: ../../standalone/drakbug_.c:40 #, c-format msgid "" "drakbug version %s\n" "Copyright (C) 2002 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "usage: drakbug [OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" msgstr "" #: ../../standalone/drakbug_.c:47 msgid " --help - print this help message.\n" msgstr "" #: ../../standalone/drakbug_.c:48 msgid " --report - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:49 msgid " --incident - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:64 msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakbug_.c:70 msgid "First Time Wizard" msgstr "" #: ../../standalone/drakbug_.c:71 msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:86 #: ../../standalone/drakbug_.c:156 ../../standalone/drakbug_.c:158 #: ../../standalone/drakbug_.c:162 #, fuzzy msgid "Standalone Tools" msgstr "Ferramentas do Console" #: ../../standalone/drakbug_.c:73 msgid "HardDrake" msgstr "" #: ../../standalone/drakbug_.c:74 #, fuzzy msgid "Mandrake Online" msgstr "Centro de Controle" #: ../../standalone/drakbug_.c:75 #, fuzzy msgid "Menudrake" msgstr "Expert" #: ../../standalone/drakbug_.c:76 #, fuzzy msgid "Msec" msgstr "Mouse" #: ../../standalone/drakbug_.c:77 #, fuzzy msgid "Remote Control" msgstr "Impressora remota" #: ../../standalone/drakbug_.c:78 #, fuzzy msgid "Software Manager" msgstr "Nome compartilhado" #: ../../standalone/drakbug_.c:79 msgid "Urpmi" msgstr "" #: ../../standalone/drakbug_.c:80 msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug_.c:81 #, fuzzy msgid "Userdrake" msgstr "Printerdrake" #: ../../standalone/drakbug_.c:82 #, fuzzy msgid "Configuration Wizards" msgstr "Auxiliar de Configuração da Rede" #: ../../standalone/drakbug_.c:97 #, fuzzy msgid "Application:" msgstr "Autenticação?" #: ../../standalone/drakbug_.c:98 #, fuzzy msgid "Package: " msgstr "Seleção de Grupo de Pacotes" #: ../../standalone/drakbug_.c:99 msgid "Kernel:" msgstr "" #: ../../standalone/drakbug_.c:100 #, fuzzy msgid "Release: " msgstr "Por favor aguarde" #: ../../standalone/drakbug_.c:115 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug_.c:134 #, fuzzy msgid "Report" msgstr "Porta" #: ../../standalone/drakbug_.c:171 #, fuzzy msgid "Not installed" msgstr "Sair da instalação" #: ../../standalone/drakbug_.c:189 msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug_.c:196 #, fuzzy msgid "No browser available! Please install one" msgstr "Screenshots estarão disponíveis depois da instalação em %s" #: ../../standalone/drakconnect_.c:79 #, c-format msgid "Network configuration (%d adapters)" msgstr "Configuração da Rede (%d adaptadores)" #: ../../standalone/drakconnect_.c:86 ../../standalone/drakconnect_.c:594 msgid "Profile: " msgstr "Perfil: " #: ../../standalone/drakconnect_.c:94 msgid "Del profile..." msgstr "Apagar perfil..." #: ../../standalone/drakconnect_.c:100 msgid "Profile to delete:" msgstr "Perfil a apagar:" #: ../../standalone/drakconnect_.c:128 msgid "New profile..." msgstr "Novo perfil..." #: ../../standalone/drakconnect_.c:134 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/drakconnect_.c:160 msgid "Hostname: " msgstr "Hostname:" #: ../../standalone/drakconnect_.c:167 msgid "Internet access" msgstr "Acesso à Internet" #: ../../standalone/drakconnect_.c:180 msgid "Type:" msgstr "Tipo:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Gateway:" msgstr "Gateway:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Interface:" msgstr "Interface:" #: ../../standalone/drakconnect_.c:194 msgid "Status:" msgstr "Status:" #: ../../standalone/drakconnect_.c:201 msgid "Wait please" msgstr "" #: ../../standalone/drakconnect_.c:219 msgid "Configure Internet Access..." msgstr "Configurar Acesso à Internet..." #: ../../standalone/drakconnect_.c:226 ../../standalone/drakconnect_.c:448 msgid "LAN configuration" msgstr "Configuração LAN" #: ../../standalone/drakconnect_.c:231 msgid "Driver" msgstr "Driver" #: ../../standalone/drakconnect_.c:231 msgid "Interface" msgstr "Interface" #: ../../standalone/drakconnect_.c:231 msgid "Protocol" msgstr "Protocolo" #: ../../standalone/drakconnect_.c:231 #, fuzzy msgid "State" msgstr "Status:" #: ../../standalone/drakconnect_.c:243 msgid "Configure Local Area Network..." msgstr "Configurar Rede Local (LAN)..." #: ../../standalone/drakconnect_.c:255 msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/drakconnect_.c:256 msgid "Wizard..." msgstr "Ajudante..." #: ../../standalone/drakconnect_.c:282 msgid "Apply" msgstr "Aplicar" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Connected" msgstr "Conectado" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Not connected" msgstr "Não conectado" #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Connect..." msgstr "Conectar..." #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Disconnect..." msgstr "Desconectar..." #: ../../standalone/drakconnect_.c:403 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect_.c:430 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Você não possui nenhuma interface configurada.\n" "Configure-as primeiro clicando em 'Configurar'" #: ../../standalone/drakconnect_.c:452 msgid "LAN Configuration" msgstr "Configuração LAN" #: ../../standalone/drakconnect_.c:463 #, c-format msgid "Adapter %s: %s" msgstr "Adaptador %s: %s" #: ../../standalone/drakconnect_.c:469 msgid "Boot Protocol" msgstr "Protocolo da inicialização" #: ../../standalone/drakconnect_.c:470 msgid "Started on boot" msgstr "Iniciado na inicialização" #: ../../standalone/drakconnect_.c:471 msgid "DHCP client" msgstr "Cliente DHCP" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 #, fuzzy msgid "activate now" msgstr "Ativo" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 #, fuzzy msgid "deactivate now" msgstr "Ativo" #: ../../standalone/drakconnect_.c:502 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect_.c:559 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Você não possui nenhuma conexão à Internet.\n" "Crie uma clicando em 'Configurar'" #: ../../standalone/drakconnect_.c:583 msgid "Internet connection configuration" msgstr "Configuração da conexão à Internet" #: ../../standalone/drakconnect_.c:587 msgid "Internet Connection Configuration" msgstr "Configuração da conexão à Internet" #: ../../standalone/drakconnect_.c:596 msgid "Connection type: " msgstr "Tipo de conexão: " #: ../../standalone/drakconnect_.c:602 msgid "Parameters" msgstr "Parâmetros" #: ../../standalone/drakconnect_.c:620 msgid "Gateway" msgstr "Gateway" #: ../../standalone/drakconnect_.c:629 msgid "Ethernet Card" msgstr "Placa Ethernet" #: ../../standalone/drakconnect_.c:630 msgid "DHCP Client" msgstr "Cliente DHCP" #: ../../standalone/drakfloppy_.c:64 msgid "usage: drakfloppy\n" msgstr "utilização: drakfloppy\n" #: ../../standalone/drakfloppy_.c:68 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #: ../../standalone/drakfloppy_.c:69 msgid "Module name" msgstr "Nome do módulo" #: ../../standalone/drakfloppy_.c:69 msgid "Size" msgstr "Tamanho" #: ../../standalone/drakfloppy_.c:74 msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy_.c:91 msgid "boot disk creation" msgstr "criação de discos de boot" #: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112 msgid "default" msgstr "padrão" #: ../../standalone/drakfloppy_.c:115 #, c-format msgid "DrakFloppy Error: %s" msgstr "Erro DrakFloppy: %s" #: ../../standalone/drakfloppy_.c:126 msgid "kernel version" msgstr "versão do kernel" #: ../../standalone/drakfloppy_.c:132 msgid "General" msgstr "Principal" #: ../../standalone/drakfloppy_.c:137 msgid "Expert Area" msgstr "Área Expert" #: ../../standalone/drakfloppy_.c:140 msgid "mkinitrd optional arguments" msgstr "argumentos opcionais mkinitrd" #: ../../standalone/drakfloppy_.c:141 msgid "Add a module" msgstr "Adicionar um módulo" #: ../../standalone/drakfloppy_.c:161 msgid "force" msgstr "forçar" #: ../../standalone/drakfloppy_.c:162 msgid "if needed" msgstr "se necessário" #: ../../standalone/drakfloppy_.c:163 msgid "omit scsi modules" msgstr "omitir módulos scsi" #: ../../standalone/drakfloppy_.c:164 msgid "omit raid modules" msgstr "omitir módulos raid" #: ../../standalone/drakfloppy_.c:200 msgid "Remove a module" msgstr "Remover um módulo" #: ../../standalone/drakfloppy_.c:222 msgid "Output" msgstr "Saída" #: ../../standalone/drakfloppy_.c:234 msgid "Build the disk" msgstr "Criar o disco" #: ../../standalone/drakfloppy_.c:377 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Certifique-se de que há um disco no dispositivo %s" #: ../../standalone/drakfloppy_.c:382 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Não há nenhum disco no dispositivo %s.\n" "Por favor insira um disco." #: ../../standalone/drakfloppy_.c:384 #, c-format msgid "Unable to fork: %s" msgstr "Incapaz de dividir: %s" #: ../../standalone/drakfloppy_.c:388 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "Incapaz de fechar adequadamente o mkbootdisk: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:231 msgid "Search installed fonts" msgstr "" #: ../../standalone/drakfont_.c:233 msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont_.c:257 msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont_.c:260 #, fuzzy msgid "no fonts found" msgstr "nenhuma placa de rede encontrada" #: ../../standalone/drakfont_.c:269 ../../standalone/drakfont_.c:323 #: ../../standalone/drakfont_.c:379 ../../standalone/drakfont_.c:468 #: ../../standalone/drakfont_.c:479 ../../standalone/drakfont_.c:506 #: ../../standalone/drakfont_.c:520 ../../standalone/drakfont_.c:537 #, fuzzy msgid "done" msgstr "Pronto" #: ../../standalone/drakfont_.c:275 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:321 msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont_.c:325 msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont_.c:349 msgid "Search fonts in installed list" msgstr "" #: ../../standalone/drakfont_.c:377 msgid "Fonts copy" msgstr "" #: ../../standalone/drakfont_.c:381 #, fuzzy msgid "True Type fonts installation" msgstr "Preparando instalação" #: ../../standalone/drakfont_.c:389 msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont_.c:394 msgid "True Type install done" msgstr "" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:429 msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:409 ../../standalone/drakfont_.c:433 #: ../../standalone/drakfont_.c:464 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:419 ../../standalone/drakfont_.c:442 msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont_.c:452 msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:459 msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:470 msgid "Suppress temporary Files" msgstr "" #: ../../standalone/drakfont_.c:473 #, fuzzy msgid "Restart XFS" msgstr "restrito" #: ../../standalone/drakfont_.c:518 ../../standalone/drakfont_.c:532 msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont_.c:534 #, fuzzy msgid "xfs restart" msgstr "restrito" #: ../../standalone/drakfont_.c:542 ../../standalone/drakfont_.c:951 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:630 #, fuzzy msgid "Fonts Importation" msgstr "Formatar partições" #: ../../standalone/drakfont_.c:660 msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont_.c:668 msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont_.c:679 #, fuzzy msgid "Advanced Options" msgstr "Configuração LAN" #: ../../standalone/drakfont_.c:687 #, fuzzy msgid "Font List" msgstr "Ponto de Montagem" #: ../../standalone/drakfont_.c:909 #, fuzzy msgid "Choose the applications that will support the fonts:" msgstr "Escolha as partições que você quer formatar" #: ../../standalone/drakfont_.c:918 msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont_.c:925 #, fuzzy msgid "StarOffice" msgstr "Escritório" #: ../../standalone/drakfont_.c:932 #, fuzzy msgid "Abiword" msgstr "Abortar" #: ../../standalone/drakfont_.c:939 #, fuzzy msgid "Generic Printers" msgstr "Impressora" #: ../../standalone/drakfont_.c:1016 msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont_.c:1063 #, fuzzy msgid "Install List" msgstr "Instalar sistema" #: ../../standalone/drakfont_.c:1106 msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont_.c:1113 msgid "here if no." msgstr "" #: ../../standalone/drakfont_.c:1174 msgid "Unselected All" msgstr "" #: ../../standalone/drakfont_.c:1178 #, fuzzy msgid "Selected All" msgstr "Selecione arquivo" #: ../../standalone/drakfont_.c:1182 #, fuzzy msgid "Remove List" msgstr "Impressora remota" #: ../../standalone/drakfont_.c:1204 ../../standalone/drakfont_.c:1237 #, fuzzy msgid "Initials tests" msgstr "Mensagem Inicial" #: ../../standalone/drakfont_.c:1207 #, fuzzy msgid "Copy fonts on your system" msgstr "Nenhum adaptador de rede em seu sistema!" #: ../../standalone/drakfont_.c:1211 msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont_.c:1215 #, fuzzy msgid "Post Install" msgstr "Instalar" #: ../../standalone/drakfont_.c:1240 #, fuzzy msgid "Remove fonts on your system" msgstr "Nenhum adaptador de rede em seu sistema!" #: ../../standalone/drakfont_.c:1244 #, fuzzy msgid "Post Uninstall" msgstr "Sair da instalação" #: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:184 msgid "Internet Connection Sharing" msgstr "Compartilhamento da Conexão à Internet" #: ../../standalone/drakgw_.c:115 msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakgw_.c:126 msgid "Internet Connection Sharing currently enabled" msgstr "O Compartilhamento da Conexão à Internet está ativo" #: ../../standalone/drakgw_.c:127 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração de compartilhamento da conexão à Internet já foi feita.\n" "Ela está ativa.\n" "\n" "O que você gostaria de fazer?" #: ../../standalone/drakgw_.c:131 msgid "disable" msgstr "desativar" #: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "dismiss" msgstr "liberar" #: ../../standalone/drakgw_.c:131 ../../standalone/drakgw_.c:156 msgid "reconfigure" msgstr "reconfigurar" #: ../../standalone/drakgw_.c:134 msgid "Disabling servers..." msgstr "Desativando servidores..." #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "O Compartilhamento da Conexão à Internet agora está desativado." #: ../../standalone/drakgw_.c:151 msgid "Internet Connection Sharing currently disabled" msgstr "O Compartilhamento da Conexão à Internet está desativado" #: ../../standalone/drakgw_.c:152 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração do compartilhamento da conexão à Internet já foi feito.\n" "Está desabilitado.\n" "\n" "O que você gostaria de fazer?" #: ../../standalone/drakgw_.c:156 msgid "enable" msgstr "ativar" #: ../../standalone/drakgw_.c:163 msgid "Enabling servers..." msgstr "Ativando servidores..." #: ../../standalone/drakgw_.c:168 msgid "Internet connection sharing is now enabled." msgstr "O Compartilhamento da Conexão à Internet agora está ativo." #: ../../standalone/drakgw_.c:185 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Você está para configurar o compartilhamento da conexão à Internet do seu \n" "computador. Assim, outros computadores da sua rede local serão capaz de user " "a conexão à Internet deste computador.\n" "\n" "Nota: você precisa de um Adaptador de Rede dedicado para criar um Rede Local " "(LAN)." #: ../../standalone/drakgw_.c:213 #, c-format msgid "Interface %s (using module %s)" msgstr "Interface %s (usando módulo %s)" #: ../../standalone/drakgw_.c:214 #, c-format msgid "Interface %s" msgstr "Interface %s" #: ../../standalone/drakgw_.c:222 msgid "No network adapter on your system!" msgstr "Nenhum adaptador de rede em seu sistema!" #: ../../standalone/drakgw_.c:223 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Nenhum adaptador de rede foi detectado em seu sistema. Favor executar a " "ferramenta de configuração de hardware." #: ../../standalone/drakgw_.c:229 msgid "Network interface" msgstr "Interface de rede" #: ../../standalone/drakgw_.c:230 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Existe apenas um adaptador de rede configurado em seu sistema:\n" "\n" "%s\n" "\n" "Irei configurar sua Rede Local (LAN) com esse adaptador." #: ../../standalone/drakgw_.c:239 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Favor escolher qual adaptador de rede será conectado à su Rede Local." #: ../../standalone/drakgw_.c:265 #, fuzzy msgid "Network interface already configured" msgstr "Monitor não configurado" #: ../../standalone/drakgw_.c:266 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw_.c:271 #, fuzzy msgid "Automatic reconfiguration" msgstr "Configuração do estilo de inicialização" #: ../../standalone/drakgw_.c:272 #, fuzzy msgid "Show current interface configuration" msgstr "Configuração da Internet" #: ../../standalone/drakgw_.c:274 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw_.c:287 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:294 #, fuzzy msgid "Local Network adress" msgstr "nenhuma placa de rede encontrada" #: ../../standalone/drakgw_.c:298 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:304 #, fuzzy msgid "(This) DHCP Server IP" msgstr "IP do servidor CUPS" #: ../../standalone/drakgw_.c:305 #, fuzzy msgid "The DNS Server IP" msgstr "IP do servidor CUPS" #: ../../standalone/drakgw_.c:306 #, fuzzy msgid "The internal domain name" msgstr "Nenhuma impressora" #: ../../standalone/drakgw_.c:307 msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw_.c:308 msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw_.c:309 msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:310 msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:311 msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw_.c:318 msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw_.c:329 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "Potencial conflinto de endereço LAN encontra na configuração atual de %s!\n" #: ../../standalone/drakgw_.c:339 msgid "Configuring..." msgstr "Configurando..." #: ../../standalone/drakgw_.c:340 msgid "Configuring scripts, installing software, starting servers..." msgstr "Configurando scripts, instalando programas, iniciando servidores..." #: ../../standalone/drakgw_.c:376 #, c-format msgid "Problems installing package %s" msgstr "Problemas instalando pacote %s" #: ../../standalone/drakgw_.c:509 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Tudo foi configurado.\n" "Você agora pode compartilhar sua conexão com outros computadores na sua Rede " "Local (LAN), usando a configuração automática de rede (DHCP)." #: ../../standalone/drakgw_.c:528 msgid "The setup has already been done, but it's currently disabled." msgstr "A configuração já foi feita, mas está desativada." #: ../../standalone/drakgw_.c:529 msgid "The setup has already been done, and it's currently enabled." msgstr "A configuração já foi feita e está desativada." #: ../../standalone/drakgw_.c:530 msgid "No Internet Connection Sharing has ever been configured." msgstr "O Compartilhamento de Conexão à Internet nunca foi configurado." #: ../../standalone/drakgw_.c:535 msgid "Internet connection sharing configuration" msgstr "Configuração do compartilhamento da Internet" #: ../../standalone/drakgw_.c:542 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Bem-vindo ao utilitário de Compartilhamente da Conexão à Internet!\n" "\n" "%s\n" "\n" "Clique em ``Configurar'' se você quiser abrir o ajudante de configuração." #: ../../standalone/drakperm_.c:42 #, fuzzy msgid "group" msgstr "Grupo de trabalho" #: ../../standalone/drakperm_.c:42 msgid "path" msgstr "" #: ../../standalone/drakperm_.c:42 #, fuzzy msgid "permissions" msgstr "partição %s" #: ../../standalone/drakperm_.c:42 #, fuzzy msgid "user" msgstr "Nome do usuário" #: ../../standalone/drakperm_.c:49 msgid "Up" msgstr "" #: ../../standalone/drakperm_.c:50 #, fuzzy msgid "delete" msgstr "Deletar" #: ../../standalone/drakperm_.c:51 msgid "edit" msgstr "" #: ../../standalone/drakperm_.c:52 #, fuzzy msgid "Down" msgstr "Pronto" #: ../../standalone/drakperm_.c:53 #, fuzzy msgid "add a rule" msgstr "Adicionar um módulo" #: ../../standalone/drakperm_.c:54 msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm_.c:57 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm_.c:62 #, fuzzy msgid "Add a new rule at the end" msgstr "Nenhuma impressora" #: ../../standalone/drakperm_.c:63 msgid "Edit curent rule" msgstr "" #: ../../standalone/drakperm_.c:64 msgid "Up selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:65 msgid "Down selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:66 #, fuzzy msgid "Delete selected rule" msgstr "Fila remota" #: ../../standalone/drakperm_.c:237 msgid "browse" msgstr "" #: ../../standalone/drakperm_.c:244 #, fuzzy msgid "Current user" msgstr "Aceitar usuário" #: ../../standalone/drakperm_.c:249 #, fuzzy msgid "Permissions" msgstr "Versão: %s\n" #: ../../standalone/drakperm_.c:250 msgid "Path" msgstr "" #: ../../standalone/drakperm_.c:251 #, fuzzy msgid "Property" msgstr "Porta" #: ../../standalone/drakperm_.c:253 msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm_.c:254 msgid "Set-UID" msgstr "" #: ../../standalone/drakperm_.c:255 msgid "Set-GID" msgstr "" #: ../../standalone/drakperm_.c:310 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm_.c:311 #, fuzzy msgid "Use owner id for execution" msgstr "Usar auto detecção" #: ../../standalone/drakperm_.c:312 #, fuzzy msgid "Use group id for execution" msgstr "Usar auto detecção" #: ../../standalone/drakperm_.c:313 msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm_.c:318 #, fuzzy msgid "Path selection" msgstr "Salvar seleção de pacotes" #: ../../standalone/drakperm_.c:364 #, fuzzy msgid "user :" msgstr "Nome do usuário" #: ../../standalone/drakperm_.c:366 #, fuzzy msgid "group :" msgstr "Grupo de trabalho" #: ../../standalone/draksound_.c:47 #, fuzzy msgid "No Sound Card detected!" msgstr "Não conectado" #: ../../standalone/draksound_.c:48 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound_.c:55 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksplash_.c:34 msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/draksplash_.c:78 #, fuzzy msgid "first step creation" msgstr "criação de discos de boot" #: ../../standalone/draksplash_.c:79 #, fuzzy msgid "final resolution" msgstr "Resolução" #: ../../standalone/draksplash_.c:80 ../../standalone/draksplash_.c:172 #, fuzzy msgid "choose image file" msgstr "Escolher ação" #: ../../standalone/draksplash_.c:81 #, fuzzy msgid "Theme name" msgstr "Nome compartilhado" #: ../../standalone/draksplash_.c:85 msgid "Browse" msgstr "" #: ../../standalone/draksplash_.c:99 ../../standalone/draksplash_.c:162 #, fuzzy msgid "Configure bootsplash picture" msgstr "Configurar serviços" #: ../../standalone/draksplash_.c:100 msgid "" "x coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:101 msgid "" "y coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:102 msgid "text width" msgstr "" #: ../../standalone/draksplash_.c:103 msgid "text box height" msgstr "" #: ../../standalone/draksplash_.c:104 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:105 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:106 msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:107 msgid "the heigth of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:108 msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:121 #, fuzzy msgid "Preview" msgstr "dispositivos" #: ../../standalone/draksplash_.c:123 #, fuzzy msgid "Save theme" msgstr "Instalar sistema" #: ../../standalone/draksplash_.c:124 #, fuzzy msgid "Choose color" msgstr "Escolha um monitor" #: ../../standalone/draksplash_.c:127 msgid "Display logo on Console" msgstr "" #: ../../standalone/draksplash_.c:128 msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash_.c:165 ../../standalone/draksplash_.c:329 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "" #: ../../standalone/draksplash_.c:212 msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash_.c:435 #, fuzzy msgid "ProgressBar color selection" msgstr "Conexão da Impressora" #: ../../standalone/draksplash_.c:456 #, fuzzy msgid "You must choose an image file first!" msgstr "Dispositivo de Impressão URI" #: ../../standalone/draksplash_.c:465 #, fuzzy msgid "Generating preview ..." msgstr "Detectando dispositivos..." #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:511 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakxtv_.c:49 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:66 #, fuzzy msgid "Canada (cable)" msgstr "Canadense (Quebec)" #: ../../standalone/drakxtv_.c:66 msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "East Europe" msgstr "Europa" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "France [SECAM]" msgstr "França" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "Ireland" msgstr "Islandês" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "West Europe" msgstr "Europa" #: ../../standalone/drakxtv_.c:69 #, fuzzy msgid "Australia" msgstr "serial" #: ../../standalone/drakxtv_.c:69 msgid "Newzealand" msgstr "" #: ../../standalone/drakxtv_.c:70 msgid "South Africa" msgstr "" #: ../../standalone/drakxtv_.c:71 msgid "Argentina" msgstr "" #: ../../standalone/drakxtv_.c:72 msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv_.c:107 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv_.c:109 msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv_.c:110 msgid "Area:" msgstr "" #: ../../standalone/drakxtv_.c:114 msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv_.c:122 msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:125 #, fuzzy msgid "There was an error while scanning for TV channels" msgstr "Houve um erro instalando os pacotes:" #: ../../standalone/drakxtv_.c:126 msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv_.c:129 msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv_.c:130 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv_.c:153 msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv_.c:154 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/harddrake2_.c:8 #, fuzzy msgid "" "\n" "Usage: harddrake [-h|--help] [--test]\n" msgstr "utilização: keyboarddrake [--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "utilização: keyboarddrake [--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:32 msgid "Please, choose your keyboard layout." msgstr "Favor escolher o layout do seu teclado." #: ../../standalone/keyboarddrake_.c:41 msgid "Do you want the BackSpace to return Delete in console?" msgstr "Você quer que o BackSpace retorne o Delete no console?" #: ../../standalone/livedrake_.c:24 msgid "Change Cd-Rom" msgstr "Mudar Cd-Rom" #: ../../standalone/livedrake_.c:25 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Favor inserir o Cd-Rom de instalação no seu drive e pressionar em Ok.\n" "Se você não o tiver, pressione em Cancelar para sair da atualização on-line." #: ../../standalone/livedrake_.c:35 msgid "Unable to start live upgrade !!!\n" msgstr "Incapaz de iniciar a atualização on-line!!!\n" #: ../../standalone/localedrake_.c:33 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:86 ../../ugtk.pm_.c:285 #, fuzzy msgid "logdrake" msgstr "draknet" #: ../../standalone/logdrake_.c:96 msgid "Show only for the selected day" msgstr "" #: ../../standalone/logdrake_.c:103 msgid "/File/_New" msgstr "/Arquivo/_Novo" #: ../../standalone/logdrake_.c:103 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:104 msgid "/File/_Open" msgstr "/Arquivo/_Abrir" #: ../../standalone/logdrake_.c:104 msgid "O" msgstr "A" #: ../../standalone/logdrake_.c:105 msgid "/File/_Save" msgstr "/Arquivo/_Salvar" #: ../../standalone/logdrake_.c:105 msgid "S" msgstr "S" #: ../../standalone/logdrake_.c:106 msgid "/File/Save _As" msgstr "/Arquivo/Salvar _Como" #: ../../standalone/logdrake_.c:107 msgid "/File/-" msgstr "/Arquivo/-" #: ../../standalone/logdrake_.c:109 msgid "/_Options" msgstr "/_Opções" #: ../../standalone/logdrake_.c:110 msgid "/Options/Test" msgstr "/Opções/Teste" #: ../../standalone/logdrake_.c:112 msgid "/Help/_About..." msgstr "/Ajuda/_Sobre..." #: ../../standalone/logdrake_.c:119 msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" #: ../../standalone/logdrake_.c:120 msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" #: ../../standalone/logdrake_.c:174 #, fuzzy msgid "User" msgstr "Nome do usuário" #: ../../standalone/logdrake_.c:175 #, fuzzy msgid "Messages" msgstr "Mensagem Inicial" #: ../../standalone/logdrake_.c:176 msgid "Syslog" msgstr "" #: ../../standalone/logdrake_.c:177 msgid "Mandrake Tools Explanations" msgstr "" #: ../../standalone/logdrake_.c:180 msgid "search" msgstr "" #: ../../standalone/logdrake_.c:186 msgid "A tool to monitor your logs" msgstr "" #: ../../standalone/logdrake_.c:187 msgid "Settings" msgstr "" #: ../../standalone/logdrake_.c:192 #, fuzzy msgid "matching" msgstr "Máquina:" #: ../../standalone/logdrake_.c:193 #, fuzzy msgid "but not matching" msgstr "Máquina:" #: ../../standalone/logdrake_.c:197 msgid "Choose file" msgstr "" #: ../../standalone/logdrake_.c:202 msgid "Calendar" msgstr "" #: ../../standalone/logdrake_.c:212 msgid "Content of the file" msgstr "" #: ../../standalone/logdrake_.c:216 ../../standalone/logdrake_.c:392 msgid "Mail alert" msgstr "" #: ../../standalone/logdrake_.c:268 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../standalone/logdrake_.c:409 #, fuzzy msgid "Mail alert configuration" msgstr "Configuração LAN" #: ../../standalone/logdrake_.c:410 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake_.c:417 msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake_.c:418 #, fuzzy msgid "Domain Name Resolver" msgstr "Nome do domínio" #: ../../standalone/logdrake_.c:419 #, fuzzy msgid "Ftp Server" msgstr "Servidor NIS" #: ../../standalone/logdrake_.c:420 #, fuzzy msgid "Postfix Mail Server" msgstr "Servidor de mensagens postfiz, servidor de notícias Inn" #: ../../standalone/logdrake_.c:421 #, fuzzy msgid "Samba Server" msgstr "Servidor NIS" #: ../../standalone/logdrake_.c:422 #, fuzzy msgid "SSH Server" msgstr "Servidor NIS" #: ../../standalone/logdrake_.c:423 #, fuzzy msgid "Webmin Service" msgstr "dispositivo" #: ../../standalone/logdrake_.c:424 #, fuzzy msgid "Xinetd Service" msgstr "Servidor de Impressão" #: ../../standalone/logdrake_.c:431 #, fuzzy msgid "service setting" msgstr "dispositivo" #: ../../standalone/logdrake_.c:432 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "" #: ../../standalone/logdrake_.c:444 #, fuzzy msgid "load setting" msgstr "Formatando" #: ../../standalone/logdrake_.c:445 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:458 #, fuzzy msgid "alert configuration" msgstr "Configuração" #: ../../standalone/logdrake_.c:459 #, fuzzy msgid "Please enter your email address below " msgstr "Favor tentar novamente" #: ../../standalone/logdrake_.c:498 msgid "Save as.." msgstr "Salvar como..." #: ../../standalone/mousedrake_.c:45 msgid "Please, choose the type of your mouse." msgstr "Favor escolher o tipo do seu mouse." #: ../../standalone/mousedrake_.c:58 msgid "Emulate third button?" msgstr "Deseja emulação de 3 botões?" #: ../../standalone/printerdrake_.c:57 #, fuzzy msgid "Reading printer data ..." msgstr "Lendo banco de dados de drivers do CUPS" #: ../../standalone/scannerdrake_.c:41 #, fuzzy msgid "Detecting devices ..." msgstr "Detectando dispositivos..." #: ../../standalone/scannerdrake_.c:41 msgid "Test ports" msgstr "Testar portas" #: ../../standalone/scannerdrake_.c:53 ../../standalone/scannerdrake_.c:68 #: ../../standalone/scannerdrake_.c:81 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake_.c:56 #, fuzzy, c-format msgid "%s found on %s, configure it?" msgstr "Você gostaria de configurar uma impressora?" #: ../../standalone/scannerdrake_.c:59 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake_.c:65 #, fuzzy msgid "Select a scanner" msgstr "Selecione uma placa gráfica" #: ../../standalone/scannerdrake_.c:93 #, c-format msgid "This %s scanner is unsupported" msgstr "" #: ../../standalone/scannerdrake_.c:107 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" #: ../../standalone/scannerdrake_.c:109 #, fuzzy msgid "choose device" msgstr "Dispositivo de boot" #: ../../standalone/scannerdrake_.c:115 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake_.c:120 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../standalone/service_harddrake_.c:48 msgid "Some devices were added:\n" msgstr "" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "Escolha seu idioma" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "Selecione a classe da instalação" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "Detecção de discos rigidos" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "Configurar mouse" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "Escolha seu teclado" #: ../../steps.pm_.c:19 msgid "Security" msgstr "Segurança" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "Setup dos sistemas de arquivos" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Formatar partições" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "Escolha pacotes a serem instalados" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "Instalar sistema" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "Adicionar um usuário" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "Configurar rede" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "Configurar serviços" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "Instalar gerenciador de inicialização" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "Criar um disco de inicialização" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "Configurar X" #: ../../steps.pm_.c:34 #, fuzzy msgid "Install system updates" msgstr "Instalar sistema" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "Sair da instalação" #: ../../ugtk.pm_.c:648 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Servidor, Web/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Computador de rede (cliente)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor SSH" #: ../../share/compssUsers:999 msgid "Office" msgstr "Escritório" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Estação de Trabalho Gnome" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Ferramentas para o seu Palm Pilot e seu Visor" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Estação de Trabalho" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Servidor, Firewall/Roteador" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Nome do Domínio e Servidor de Informação da Rede" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Programas de escritório: processadores de texto (kword, abiword), tabelas " "(kspread, gnumeric), visualizadores pdf, etc" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" "Ferramentas relacionadas à áudio: tocadores de mp3 ou midi, mixers, etc" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Livros e Howto's sobre Linux e Software Livre" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "Estação de Trabalho KDE" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Multimídia - Vídeo" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" "Conjunto de ferramentas para mensagens, notícias, web, transferências de " "arquivos e bate-papo" #: ../../share/compssUsers:999 msgid "Database" msgstr "Servidor, Bancos de dados" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "Servidor de banco de dados PostgreSQL ou MySQL" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Ferramentas para facilitar a configuração do seu computador" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Multimídia - Som" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Documentação" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Ferramentas do Console" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Servidor de mensagens postfiz, servidor de notícias Inn" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Estação de Internet" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Estação de Multimídia" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Configuração" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "Mais Desktops Gráficos (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "O K Desktop Environment, o ambiente gráfico básico acompanhando de uma " "coleção de ferramentas" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Ambiente Gráfico" #: ../../share/compssUsers:999 msgid "Development" msgstr "Desenvolvimento" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache e Pro-ftpd" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "Ferramentas para criar e gravar CD's" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Estação de Trabalho de Escritório" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Programas gráficos como o The Gimp" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Bibliotecas de desenvolvimento C e C++, programas e arquivos include" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Servidor de Rede" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "Servidor, Correio/Groupware/News" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Estação de Jogos" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Editor e visualizadores de Vídeo" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Multimídia - Gráficos" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Programas de divertimento: arcade, estratégia, etc" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Conjunto de ferramentas para ler e enviar mensagem e notícias (pine, mutt, " "tin...) e para navegar na Web" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Finança Pessoal" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Um ambiente gráfico com um conjunto de aplicativos e ferramenas de desktop " "amigáveis" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Clientes para protocolos diferentes incluindo ssh" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internet Gateway" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Programas editores/tocadores de som e vídeo" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Outros Desktops Gráficos" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Editores, shells, ferramentas de arquivos, terminais" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "Programas para gerenciar seu dinheiro, como o gnucash" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Gereciador de Informação Pessoal" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Multimídia - Gravação de CD" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Estação de Trabalho Científica"