# translation of DrakX-no.po to Norwegian Bokm�l
# KTranslator Generated File
# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Terje Bjerkelia <terje@bjerkelia.com>, 1999-2000
# Andreas Bergstr�m <abergstr@halden.net>, 2000
# Kenneth R�rvik <kenneth@argon.no-ip.com>, 2003
# Per �yvind Karlsen <peroyvind@sintrax.net>, 2003
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-no\n"
"POT-Creation-Date: 2003-03-12 14:29+0100\n"
"PO-Revision-Date: 2003-03-09 16:20-0500\n"
"Last-Translator: Per �yvind Karlsen <peroyvind@sintrax.net>\n"
"Language-Team: Norwegian Bokm�l <cooker-i18n@linux-mandrake.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"

#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Per-bruker deling benytter gruppen \"fileshare\". \n"
"Du kan bruke userdrake til � legge til en bruker i denne gruppen."

#: ../../any.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
#: ../../standalone/draksec:1 ../../standalone/logdrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "Avbryt"

#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "Start userdrake"

#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Vil du tillate brukere � dele noen av katalogene deres?\n"
"Ved � tillate dette kan brukere enkelt klikke p� \"Share\" i konqueror og "
"nautilus.\n"
"\n"
"\"Egendefiner\"tillater egne oppsett per bruker.\n"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Obligatorisk pakke %s mangler"

#: ../../any.pm:1
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem �nsker du"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Pakken %s m� installeres. Vil du installere den?"

#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "Skreddersydd"

#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "Tillat alle brukere"

#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "Ingen deling"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "Mer"

#: ../../any.pm:1
#, c-format
msgid "Here is the full list of available countries"
msgstr "Her er den komplette lista over tilgjengelige land"

#: ../../any.pm:1
#, c-format
msgid "Please choose your country."
msgstr "Vennligst velg ditt land."

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Country"
msgstr "Land"

#: ../../any.pm:1
#, c-format
msgid "All languages"
msgstr "Alle spr�k"

#: ../../any.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr "Bruk Unicode som standard"

#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Du kan velge andre spr�k som vil v�re tilgjengelige etter installasjon"

#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "Velg vindush�ndtereren som skal kj�res:"

#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "Velg standard bruker:"

#: ../../any.pm:1
#, c-format
msgid "Do you want to use this feature?"
msgstr "�nsker du � bruke denne finessen?"

#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Jeg kan sette opp maskinen din til � automatisk logge p� en bruker."

#: ../../any.pm:1
#, c-format
msgid "Autologin"
msgstr "Autoinnlogging"

#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "Ikon"

#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "Skall"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "Passord (igjen)"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "Passord"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "Brukernavn"

#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "Virkelig navn"

#: ../../any.pm:1
#, c-format
msgid "Accept user"
msgstr "Godta bruker"

#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "Ferdig"

#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Entre en bruker\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid "Add user"
msgstr "Legg til bruker"

#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "Denne brukeren er allerede lagt til"

#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "Dette brukernavnet er for langt"

#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brukernavnet kan kun inneholde sm� bokstaver, tall, `-' og `_'"

#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "Vennligst oppgi et brukernavn"

#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "Dette passordet er for enkelt"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "Vennligst pr�v igjen"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "Passordene stemmer ikke overens"

#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(allerede lagt til %s)"

#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "tilgang til kompileringsverkt�y"

#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "tilgang til nettverksverkt�y"

#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "tilgang til administrative filer"

#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "tilgang til \"su\""

#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "tilgang til rpmverkt�y"

#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "tilgang til X-programmer"

#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Her er de forskjellige oppf�ringene.\n"
"Du kan legge til flere eller endre de eksisterende."

#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "Andre OS (windows...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Andre OS (MacOS...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Andre OS (SunOS...)"

#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "Linux"

#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Hvilken inngangstype vil du legge til"

#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "Denne etiketten er allerede i bruk"

#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "Du m� ha en rotpartisjon"

#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "Du m� velge ett kjernebilde"

#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "Tom etikett er ikke tillatt"

#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
msgid "Default"
msgstr "Standard"

#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "Ingen video"

#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "Initrdst�rrelse"

#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "Tilf�ye"

#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "Etikett"

#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "Usikker"

#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "Tabell"

#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"

#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "Les-skriv"

#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "Skjermmodus"

#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "Bilde"

#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "Standard operativsystem?"

#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "Skal det v�re mulig � boote fra OF?"

#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "Skal det v�re mulig � boote fra CD?"

#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"

#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "�pne firmwareforsinkelse"

#: ../../any.pm:1
#, c-format
msgid "Boot device"
msgstr "Oppstartsenhet"

#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "Initmelding"

#: ../../any.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "Oppstartslaster som skal brukes"

#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Hovedopsjoner for oppstartslaster"

#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"

#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "Oppgi ram-st�rrelsen i MB"

#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "Sl� p� multiprofiler"

#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Presiser RAM-st�rrelse hvis det trengs (funnet %d MB)"

#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "T�m /tmp ved hver oppstart"

#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "Opprett en oppstartdiskett"

#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "begrense"

#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "Begrense kommandolinje-opsjoner"

#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Tving ingen APIC"

#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
msgstr "Aktiver ACPI"

#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "Forsinkelse f�r man starter opp med standard imagefil"

#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "kompakt"

#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "Kompakt"

#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "Installasjon oppstartslaster"

#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "F�rste sektor av oppstartspartisjon"

#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "F�rste sektor av disk (MBR)"

#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Hvor �nsker du installere oppstartslasteren?"

#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub-installasjon"

#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "SILO-installasjon"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "Dropp"

#: ../../any.pm:1
#, c-format
msgid "On Floppy"
msgstr "P� diskett"

#: ../../any.pm:1
#, c-format
msgid "First sector of the root partition"
msgstr "F�rste sektor av root-partisjon"

#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Du har bestemt deg for � installere oppstartslasteren p� en partisjon.\n"
"Dette inneb�rer at du allerede har en oppstartslaster p� den disken du "
"starter fra (eks: System Commander.)\n"
"\n"
"Hvilken disk starter du fra?"

#: ../../any.pm:1
#, c-format
msgid "Creating bootdisk..."
msgstr "Oppretter oppstartdiskett"

#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr "Sett inn en diskett i %s"

#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Velg diskettstasjonen du �nsker � bruke for � lage oppstartsdisketten"

#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "Andre diskettstasjon"

#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "F�rste diskettstasjon"

#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "Beklager, ingen diskettstasjon tilgjengelig"

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
"ikke �nsker\n"
"� installere LILO (eller grub) p� systemet ditt, eller et annet "
"operativsystem fjerner LILO,\n"
"eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
"oppstartsdiskett\n"
"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
"lettere gjenopprette\n"
"etter systemsvikt. �nsker du � opprette en oppstartsdiskett for systemet "
"ditt?\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(ADVARSEL! Du bruker XFS p� din rotpartisjon,\n"
"det � lage en oppstartsdiskett p� en 1,44 Mb diskett vil\n"
"antageligvis ikke g�, dan XFS trenger en veldig stor driver)."

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
"ikke �nsker\n"
"� installere SILO p� systemet ditt, eller et annet operativsystem fjerner "
"SILO,\n"
"eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
"oppstartsdiskett\n"
"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
"lettere gjenopprette\n"
"etter systemsvikt.\n"
"Hvis du �nsker du � opprette en oppstartsdiskett for systemet ditt, sett inn "
"en diskett\n"
"i den f�rste stasjonen og trykk \"Ok\"."

#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Du kan ikke installere oppstartslasteren p� en %s partisjon\n"

#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "ikke nok plass i /boot"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Trykk enter for � starte opp valgt OS, 'e' for � redigere"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Bruk %c og %c tastene for � velge hvilken inngang som er markert."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Velkommen til GRUB, operativsystem-velgeren!"

#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "Grub"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "LILO med tekstmeny"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO med grafisk meny"

#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "SILO"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Velkommen til %s, operativsystem-velgeren!\n"
"\n"
"Velg et operativsystem fra listen over eller\n"
"vent %d sekunder for standard oppstart.\n"
"\n"

#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "Konsollhjelper mangler"

#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "kdesu mangler"

#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Skjermbilder vil v�re tilgjengelig etter installasjon i %s"

#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Jeg kan ikke ta skjembilder f�r partisjonering."

#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr "%d sekunder"

#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 minutt"

#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d minutter"

#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "TB"

#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "GB"

#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "MB"

#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "KB"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "USA"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "�sterrike"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "Italia"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "Netherlands"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "Sverige"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "Norge"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "Hellas"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "Germany"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "Tjekkia"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "Belgia"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "Frankrike"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Feil ved �pning av %s for skriving: %s"

#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "Ingenting � gj�re"

#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Ikke nok plass for auto-allokering"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Du kan ikke bruke ett kryptert filsystem som monteringspunkt %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Du trenger et virkelig filsystem (ext2, reiserfs, xfs eller jfs) for dette "
"monteringspunktet\n"

#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Denne katalogen b�r forbli i root filsystemet"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Du har valgt en programvare RAID partisjon som root (/).\n"
"Ingen oppstartslaster kan h�ndtere dette uten en /boot partisjon.\n"
"S� v�r n�ye med � legge til en /boot partisjon"

#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Monteringspunkt burde inneholde alfanumeriske tegn"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Monteringspunkter m� begynne med /"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Jeg kan ikke lese partisjonstabellen p� %s, den er for �delagt for meg :(\n"
"Jeg kan fors�ke � blanke ut d�rlige partisjoner (ALLE DATA vil g� tapt!)\n"
"Den andre l�sningen er � ikke la DrakX modifisere partisjonstabellen.\n"
"(feilen er %s)\n"
"\n"
"Vil du miste alle partisjonene?\n"

#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr "Feil"

#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "server"

#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "med /usr"

#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "enkel"

#: ../../fs.pm:1
#, c-format
msgid "Enabling swap partition %s"
msgstr "Aktiverer swap-partisjon %s"

#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "feil ved demontering av %s: %s"

#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "montere partisjon %s i katalog %s gikk ikke"

#: ../../fs.pm:1
#, c-format
msgid "Mounting partition %s"
msgstr "Monterer partisjon %s"

#: ../../fs.pm:1
#, c-format
msgid "Checking %s"
msgstr "Sjekker %s"

#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "Formaterer partisjon %s"

#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "Lager of formaterer fila %s"

#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Jeg vet ikke hvordan formatere %s i type %s"

#: ../../fs.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering av %s mislykket"

#: ../../help.pm:1
#, c-format
msgid ""
"Click on \"Next ->\" if you want to delete all data and partitions present\n"
"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
"be able to recover any data and partitions present on this hard drive,\n"
"including any Windows data.\n"
"\n"
"Click on \"<- Previous\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Klikk p� \"Neste ->\" hvis du �nsker � slette alle data og partisjoner p� "
"denne\n"
"harddisken. V�r forsiktig, etter at du har klikket p� \"Neste ->\" vil du "
"ikke\n"
"kunne gjenopprette data og partisjoner p� denne harddisken inkludert Windows "
"data.\n"
"\n"
"Klikk p� \"<- Forrige\" for � avbryte denne operasjonen uten � miste data "
"og\n"
"partisjoner p� denne harddisken."

#: ../../help.pm:1
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""
"Velg den harddisken du �nsker � slette for � installere din nye Mandrake\n"
"Linux partisjon. V�r forsiktig, alle data p� denne vil g� tapt og vil ikke\n"
"kunne gjenopprettes!"

#: ../../help.pm:1
#, c-format
msgid ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
"or all of the following entries. Each entry is made up of the configuration\n"
"item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"Configure\" button to change\n"
"that.\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and change\n"
"that if necessary.\n"
"\n"
" * \"Country\": check the current country selection. If you are not in this\n"
"country, click on the \"Configure\" button and choose another one. If your\n"
"country is not in the first list shown, click the \"More\" button to get\n"
"the complete country list.\n"
"\n"
" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
"country you have chosen. You can click on the \"Configure\" button here if\n"
"this is not correct.\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
"you, click on \"Configure\" to reconfigure your graphical interface.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
"to try to configure it manually.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on \"Configure\" to change the parameters\n"
"associated with the card.\n"
"\n"
" * \"Network\": If you want to configure your Internet or local network\n"
"access now.\n"
"\n"
" * \"Security Level\": this entry offers you to redefine the security level\n"
"as set in a previous step ().\n"
"\n"
" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
"a good idea to protect you from intrusions by setting up a firewall.\n"
"Consult the corresponding section of the ``Starter Guide'' for details\n"
"about firewall settings.\n"
"\n"
" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
"click that button. This should be reserved to advanced users.\n"
"\n"
" * \"Services\": you'll be able here to control finely which services will\n"
"be run on your machine. If you plan to use this machine as a server it's a\n"
"good idea to review this setup."
msgstr ""
"Som en oppsummering vil DrakX gi deg en oversikt over ymse informasjon\n"
"som den har om systemet ditt. Avhengig av installert maskinvare, kan du ha\n"
"et eller flere av de f�lgende punktene. Hvert punkt best�r av en overskrift\n"
"fulgt av en kort oppsummering av den n�v�rende konfigurasjonen. Klikk p�\n"
"den korresponderende \"Konfigurer\" knappen for � endre p� oppsettet.\n"
"\n"
" * \"Tastatur\": Sjekk at ditt tastaturoppsett er korrekt og endre om "
"n�dvendig.\n"
"\n"
" * \"Land\": Sjekk at du har valgt korrekt land. Hvis du ikke er i dette "
"landet,\n"
"klikk p� \"Konfigurer\" knappen og velg et annet land. Hvis landet ditt ikke "
"er i\n"
"listen, klikk \"Mer\" knappen for � f� en fullstendig liste.\n"
"\n"
" ' \"Tidssone\": DrakX bestemmer din tidssone ut fra hvilket land du har "
"valgt.\n"
"Du kan klikke \"Konfigurer\" her om dette ikke er korrekt.\n"
"\n"
" * \"Mus\" :Sjekk museoppsettet og klikk p� knappen for � endre om "
"n�dvendig.\n"
"\n"
" * \"Skriver\": Ved � klikke p� \"Konfigurer\" knappen �pnes "
"skriveroppsett-\n"
"veiviseren. Konsulter det tilh�rende kapittelet i oppstartsguiden for mer\n"
"informasjon om hvordan en skriver kan settes opp. Grensesnittet som er vist\n"
"der er likt det som benyttes under installasjonen.\n"
"\n"
" * \"Lydkort\": Hvis det er funnet et lydkort i ditt system, er det vist "
"her. Hvis du\n"
"finner ut at lydkortet som er vist ikke stemmer overens med det som er "
"installert\n"
"i din maskin, kan du klikke p� knappen og velge en annen driver. \n"
"\n"
" * \"Grafisk Grensesnitt\": DrakX vil sette opp ditt grafiske grensesnitt i "
"oppl�sning\n"
"800x600 eller 1024x768. Hvis det ikke passer dine behov, klikk \"Konfigurer"
"\"\n"
"knappen for � forandre p� oppsettet.\n"
"\n"
" * \"TV-kort\": Hvis et TV-kort er funnet i din maskin, er dte vist her. "
"Hvis du har\n"
"et TV-kort som ikke er funnet, klikk \"Konfigurer\" for � sette det opp "
"manuelt.\n"
"\n"
" * \"ISDN kort\": Hvis det er oppdaget et ISDN kort, vil det vise her. Du "
"kan klikke\n"
"\"Konfigurer\" for � endre p� parameterne til kortet.\n"
"\n"
" * \"Nettverk\": Velg dette for � endre p� internettforbindelsen eller det "
"lokale\n"
"nettverksoppsettet.\n"
"\n"
" * \"Sikkerhetsniv�\": Du kan her endre p� sikkerhetsniv�et som er definert "
"tidligere.\n"
"\n"
" * \"Brannmur\": Hvis du skal koble maskinen din direkte til internett, er "
"det lurt\n"
"� beskytte seg mot angrep med en brannmur. Oppstartsguiden har mer om\n"
"dette.\n"
"\n"
" * \"Oppstartslaster\": Hvis du vil endre p� konfigurasjonen til "
"oppstartslasteren,\n"
"klikk p� denne knappen. Dette blr forbeholdes avanserte brukere.\n"
"\n"
" * \"Tjenester\": Her kan du kontrollere hvilke tjenester som skal startes "
"p� din\n"
"maskin. Hvis du skal bruke maskinen som tjener er det lurt � kontrollere "
"dette."

#: ../../help.pm:1
#, c-format
msgid ""
"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver."
msgstr ""
"\"Lydkort\": hvis et lydkort blir oppdaget p� systemet ditt, blir det\n"
"vist her. Hvis du oppdager at lydkortet som blir vist her ikke er det som\n"
"faktisk er til stede p� ditt system, s� kan du klikke p� denne knappen for\n"
"� velge en annen driver."

#: ../../help.pm:1
#, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot er en oppstartslaster for NewWorld MacIntosh maskinvare. Den kan\n"
"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p� din\n"
"datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget\n"
"og installert. Hvis dette ikke skulle v�re tilfelle kan du legge til "
"endringer\n"
"her. V�r forsiktig n�r du velger de korrekte parametre.\n"
"\n"
"Yaboots hovedvalg er:\n"
"\n"
"\n"
" * Init beskjed: En enkel melding som vises f�r oppstartsprosessen starter.\n"
"\n"
" * Oppstartsenhet: Indikerer hvor du �nsker � plassere informasjonen som "
"trengs for � starte GNU/Linux. Du vil generelt ha satt opp en bootstrap-"
"partisjon\n"
"tidligere for � ta vare p� denne informasjonen.\n"
"\n"
" * �pne firmwareforsinkelse: Ulikt LILO s� er det to forsinkelser\n"
"som er tilgjengelig med yaboot. Den f�rste forsinkelsen blir m�lt i\n"
"sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n"
"MacOS eller Linux.\n"
"\n"
" * Kjerneboot Timeout: Denne er lik LILO's oppstartsforsinkelse.\n"
"Etter � ha valgt Linux, vil du ha 0,1 sekunder f�r standard kjerne\n"
"blir valgt.\n"
"\n"
" * Aktiver CD Boot?: Hvis du velger dette valget vil du kunne\n"
"trykke \"C\" for CD ved det f�rste oppstartsvalget.\n"
"\n"
" * Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n"
"trykke \"N\" for Open Firmware ved det f�rste oppstartsvalget.\n"
"\n"
" * Standard OS: Du kan velge hvilket OS som skal lastes n�r\n"
"Open Firmwareforsinkelsen er utl�pt."

#: ../../help.pm:1
#, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n"
"andre kjerner, eller for ett n�dbootimager.\n"
"\n"
"For andre OS best�r inngangen bare av et navn og rootpartisjonen\n"
"\n"
"For Linux er det et par mulige valg:\n"
"\n"
" * Label: Dette er navnet du vil skrive ved yaboot klartegnet for � velge\n"
"dette oppstartsvalget.\n"
"\n"
" * Image: Dette er navnet p� kjernen for oppstart. Typisk vmlinux\n"
"eller en variasjon av vmlinux med en utvidelse.\n"
"\n"
" * Root: \"root\" enheten eller \"/\" for Linux installasjonen din.\n"
"\n"
" * Append: P� Apple maskinvare er kjerneopsjonen append ofte brukt til\n"
"� assistere i initialisering av video maskinvare, eller til � sl� p�\n"
"tastatur museknapp emulering for de ofte manglende andre og tredje\n"
"museknappene p� en\n"
"Apple mus. Her er noen eksempler:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: Dette valget kan brukes enten til � laste initiale moduler, f�r\n"
"oppstartsenheten er tilgengelig, eller til � laste et ramdisk-bilde for en\n"
"n�doppstart situasjon.\n"
"\n"
" * Initrd-size: Standard ramdisk st�rrelse er vanligvis 4,096 bytes. Hvis "
"du\n"
"trenger � allokere en stor ramdisk, kan dette valget brukes.\n"
"\n"
" * Read-write: Normalt kommer \"root\" partisjonen opp som read-only for �\n"
"la et filsystem sjekke for systemet system blir \"live\".\n"
"Her kan du overstyre dette valget.\n"
"\n"
" * NoVideo: Skulle Apple video maskinvaren vise seg � v�re veldig\n"
"problematisk, kan du velge dette valget for � starte i \"novideo\" modus, "
"med egen framebuffer st�tte.\n"
"\n"
" * Default: Velger denne inngangen som standard Linux valg, og kan velges\n"
"ved � trykke ENTER ved yaboot klartegnet. Denne inngangen vil ogs� bli\n"
"fremhevet med en \"*\", hvis du trykker [Tab] for � se oppstarts-\n"
"valgene."

#: ../../help.pm:1
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX vil n� oppdage alle IDE-enheter som er tilstede p� ditt system. Det\n"
"vil ogs�scanne etter en eller flere PCI SCSI-kort p� systemet ditt. Hvis  "
"ett\n"
"SCSI-kort er tilstede, s� vil DrakX automatisk installere den passende "
"driveren.\n"
"\n"
"P� grunn av at maskinvareoppdagelse ikke er feilfritt, s� kan det v�re at\n"
"DrakX ikke klarer � oppdage dine harddisker. Hvis dette skjer, s� m� du\n"
"spesifisere din maskinvare for h�nd.\n"
"\n"
"Hvis du m� spesifisere PCI SCSI-kontrolleren din manuelt, s� vil DrakX\n"
"sp�rre deg om � gj�re noen valg for det. Du burde tillate DrakX � teste\n"
"maskinvaren for kort-spesifikke valg som trengs for � initialisere\n"
"maskinvaren. Som regel s� vil DrakX klare � g� igjennom dette steget uten\n"
"problemer.\n"
"\n"
"Hvis DrakX ikke er i stand til � oppdage de riktige parametrene som trengs\n"
"for din maskinvare, s� m� du manuelt konfigurere driveren."

#: ../../help.pm:1
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
"is best for a particular type of configuration.\n"
"\n"
" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
"\" will handle only very simple network cases and is somewhat slow when\n"
"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"that may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"N� er det p� tide � velge printersystemet for din maskin. Andre\n"
"operativsystemer tilbyr kanskje en, men Mandrake Linux tilbyr to.\n"
"ver av systemene er best for en spesiell type konfigurasjon.\n"
"\n"
" * \"pdq\" -- som st�r for ``print, don't queue'', er valget hvis du har en\n"
"direkte tilkobling til din printer og du vil ha muligheten til � flykte fra\n"
"printerkr�sj, og du ikke har nettverksprintere. (\"pdq\" vil bare h�ndtere\n"
"veldig enkle nettverkstilfeller og er nogenlunde treg for nettverk.) Det er\n"
"anbefalt at du bruker \"pdq\" hvis dette er din f�rste erfaring med GNU/"
"Linux.\n"
"\n"
" * \"CUPS\" -- ``Common Unix Printing System'', er perfekt til � printe til\n"
"din egen lokale printer, og ogs� til printerene p� andre siden av kloden.\n"
"Den er simpel og kan opptr� som b�de printer og klient for det "
"forhistoriske\n"
"\"lpd\"-utskriftssystemet, s� den er kompatibel med de eldre "
"operativsystemer\n"
"som fortsatt trenger utskriftstjenester. Selv om den er ganske kraftig, s� "
"er\n"
"basis-oppsettet nesten like enkelt som \"pdq\". Hvis du trenger �emulere en\n"
"\"lpd\"-server, m� du sl� p� \"cups-lpd\"-daemonen. \"CUPS\" inkluderer "
"etgrafisk grensesnitt for utskrift eller oppsett av skriver og styring av "
"skriver.\n"
"\n"
"Hvis du gj�r et valg n�, og s� senere finne ut at du ikke liker ditt "
"utskriftssystem,\n"
"s� kan du endre det ved � kj�re PrinterDrake fra Mandrake Control Center og\n"
"klikke p� ekspert-knappen.Du kan gj�re egne valg selv etter installasjonen "
"ved � kj�re PrinterDrake\n"
"fra Mandrake Control Center og klikke p� expert-knappen."

#: ../../help.pm:1
#, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader.\n"
"\n"
"\"Boot device\": in most cases, you will not change the default (\"First\n"
"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
"(\"On Floppy\")."
msgstr ""
"LILO og grub er oppstartslastere for GNU/Linux. Vanligvis er dette trinnet\n"
"helt automatisk. DrakX vil analysere oppstartssektoren p� harddisken og\n"
"bli satt opp ut fra det som finnes der.\n"
"\n"
" * Hvis en oppstartssektor for Windows blir funnet, vil den erstatte denne "
"med\n"
"en grub eller LILO oppstartsektor. P� denne m�ten kan du laste enten\n"
"GNU/Linux eller et annet operativsystem.\n"
"\n"
" * Hvis en oppstartsektor for grub eller LILO blir funnet, vil den bli "
"erstattet\n"
"med en ny.\n"
"\n"
"Dersom det ikke er mulig � avgj�re dette automatisk, vil DrakX sp�rre deg "
"hvor\n"
"oppstartslasteren skal installeres.\n"
"\n"
"\"Oppstartsenhet\": I de fleste tilfeller vli du ikke �nske � endre p�\n"
"standardvalget (\"F�rste sektor av harddisk (MBR)\"), men hvis du "
"foretrekker\n"
"det, kan oppstartslasteren installeres p� en annen harddisk, eller til og "
"med\n"
"p� en diskett (\"P� diskett\"). "

#: ../../help.pm:1
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
"your changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"Etter at du har konfigurert de generelle oppstartslaster-parametrene, s� "
"vil\n"
"listen over oppstartsvalg som vil v�re tilgjengelige under oppstart bli "
"vist.\n"
"\n"
"Hvis det er andre operativsystem installer p� din maskin, s� vil de "
"automatisk\n"
"bli lagt til i oppstartsmenyen. Du kan finjustere de eksisterende valgene "
"ved �\n"
"klikke \"Legg til\" for � lage en ny oppf�ring; velg en oppf�ring og klikk\n"
"\"Endre\" eller \"Fjern\" for � endren den eller fjerne den. Ved � klikke "
"\"OK\"\n"
"s� godkjenner du din forandringer.\n"
"\n"
"Du vil kanskje ikke gi tilgang til disse andre operativsystemene til noen "
"som\n"
"m�tte g� til konsolet og restarte maskinen. Du kan slette oppf�ringene for\n"
"operativsystemet for � fjerne dem fra oppstartslasteren, men du vil da "
"trenge\n"
"en oppstartsdiskett for � kunne starte opp disse andre operativsystemene! "

#: ../../help.pm:1
#, c-format
msgid ""
"This dialog allows to finely tune your bootloader:\n"
"\n"
" * \"Bootloader to use\": there are three choices for your bootloader:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": after a boot or a reboot of\n"
"the computer, this is the delay given to the user at the console to select\n"
"a boot entry other than the default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you do before changing any of the options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
"that are reserved for the expert user."
msgstr ""
"Denne dialogen lar deg finjustere din oppstartslaster:\n"
"\n"
" * \"Oppstartslaster som skal brukes:\": du har tre valg:\n"
"\n"
"    * \"GRUB\": hvis du foretrekker grub (tekstmeny);\n"
"\n"
"    * \"LILO med grafisk meny\": hvis du foretrekker LILO med ett grafisk "
"grensesnitt;\n"
"\n"
"    * \"LILO med tekstmeny\": hvis du foretrekker lilo med tekstmeny "
"grensesnitt.\n"
"\n"
" * * \"Oppstartsenhet\": I de fleste tilfeller, s� vil du ikke endre\n"
"standard (\"/dev/hda\"), men hvis du foretrekker det, s� kan "
"oppstartslasteren\n"
"installeres p� en annen harddisk (feks. \"/dev/hdb\"), eller til og med. p� "
"en\n"
"diskett (\"/dev/fd0\");\n"
"\n"
" * * \"Forsinkelse f�r man starter opp med standard imagefil\": n�r du "
"restarter\n"
"maskinen, s� er dette hvor lang tid brukeren har p� � velge ett annet valg\n"
"enn det som er standard.\n"
"\n"
"!! V�r obs p� at hvis du velger � ikke installere en oppstartslaster\n"
"(ved � velge \"Avbryt\" her), s� m� du v�re sikker p� at du har en m�te � "
"starte ditt\n"
"Mandrake Linux system! V�r ogs� sikker p� at du vet hva du gj�r f�r du "
"endrer\n"
"noen av valgene. !!\n"
"\n"
"Ved � velge \"Avansert\" i denne menyen s� vil du f� mange avanserte valg, \n"
"som er reservert for ekspertbrukere."

#: ../../help.pm:1
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against. GNU/Linux is as prone to operator error as any other operating\n"
"system. Since \"root\" can overcome all limitations and unintentionally\n"
"erase all data on partitions by carelessly accessing the partitions\n"
"themselves, it is important that it be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it too\n"
"easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"Advanced\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one as \"authentication\". If you do not\n"
"know which to use, ask your network administrator.\n"
"\n"
"If you happen to have problems with reminding passwords, you can choose to\n"
"have \"No password\", if your computer won't be connected to the Internet,\n"
"and if you trust anybody having access to it."
msgstr ""
"Dette er det mest kritisike valget med hensyn til sikkerheten p� ditt\n"
"GNU/Linux system: du m� skrive inn \"root\"-passordet. \"Root\" er\n"
"systemadministratoren og er den eneste som er autorisert til � gj�re\n"
"oppdateringer, legge til brukere, endre p� generell konfigurasjon, etc. "
"Kort\n"
"sagt, \"root\" kan gj�re alt! Derfor er det viktig at du velger et root-"
"passord\n"
"som er vanskelig � gjette -- DrakX vil si i fra hvis det er for enkelt. Som "
"du\n"
"ser, s� kan du velge � ikke skrive inn noe passord, men det er noe vi\n"
"anbefaler p� det sterkeste � ikke gj�re. GNU/Linux, som alle andre\n"
"operativsystem kan inneholde feil. Siden \"root\" kan omg� alle\n"
" begrensninger og kan ved uhell slette alle data p� en partisjon, s� er det\n"
"viktig � gj�re det vanskelig � bli \"root\".\n"
"\n"
"Passordet burde v�re en blanding av alfanummeriske tegn og v�re p� minst 8\n"
"tegn.\n"
" Aldri skriv ned \"root\"-passordet -- det gj�r det for enkelt � bryte seg\n"
"inn p� systemet ditt. \n"
"\n"
"Uansett, du b�r ikke lage passordet for langt og komplisert siden du m� "
"v�re \n"
"i stand til � huske det uten altfor mye tr�bbel.\n"
"\n"
"Passordet vil ikke bli vist p� skjermen n�r du skriver det. Dermed m� du\n"
"skrive inn passordet to ganger for � minske sjansen for � skrive feil. Hvis "
"du klarer �\n"
"skrive passordet feil to ganger, s� m� dette passordet bli brukt f�rste gang "
"du\n"
"logger inn.\n"
"\n"
"Hvis du �nsker � autentisere deg via en autentiserings-tjener, klikk p�\n"
"\"Avansert\"-knappen.\n"
"\n"
"Hvis nettverket ditt bruker enten LDAP, NIS eller PDC Windows\n"
"domenep�loggingstjeneste, s� vennligst velg det passende til\n"
"\"autentisering\". Har du ingen anelse, s� sp�rr nettverksoperat�ren din.\n"
"\n"
"Hvis du skulle ha problemer med � huske passord, s� kan du velge \"Inget "
"passord\n"
"hvis maskinen din ikke er koblet til internett og du stoler p� alle som har "
"tilgang til den."

#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Vennligst velg den riktige porten. F.eks., \"COM1\" porten under\n"
"Windows blir kalt \"ttyS0\" i GNU/Linux."

#: ../../help.pm:1
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
"the buttons and check that the mouse pointer moves on-screen as you move\n"
"your mouse."
msgstr ""
"DrakX oppdager vanligvis antall knapper p� musen din. Hvis ikke, s� vil den\n"
"anta at du har en to-knappers mus og vil sette opp treknappers-emulering.\n"
"Den tredje museknappen kan p� en toknappers mus kan bli brukt ved �\n"
"trykke ned b�de h�yre og venstre museknapp samtidig. DrakX vil\n"
"automatisk oppdage om din mus bruker PS/2, seriell eller USB-grensesnitt.\n"
"\n"
"Hvis du �nsker � spesifisere en annerledes musetype, velg den passende\n"
"typen fra listen du blir vist.\n"
"\n"
"Hvis du velger en annen mus enn hva som er forh�ndsvalgt, s� vil en\n"
"testskjerm bli vist. Bruk knappene og musehjulet for � sjekke at\n"
"oppsettet er riktig. Hvis musa ikke virker ordentlig, trykk [Space] eller\n"
"[Enter] for � \"avbryte\" og velge p� nytt.\n"
"\n"
"Noen ganger s� blir ikke musehjulet automatisk oppdaget. Du vil da m�tte\n"
"velge manuelt fra listen. V�r sikker p� at du velger en som er p� riktig "
"port.\n"
"Etter at du har klikket p� \"Neste ->\" knappen s� vil et musebilde bli "
"vist. Du\n"
"m� da bevege musehjulet for � aktivere det riktig. S� sjekk at alle "
"knappene\n"
"og bevegelsene er riktig."

#: ../../help.pm:1
#, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation, thereby installing the\n"
"language-specific files for system documentation and applications. For\n"
"example, if you will host users from Spain on your machine, select English\n"
"as the default language in the tree view and \"Espanol\" in the Advanced\n"
"section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"All\n"
"languages\" box. Selecting support for a language means translations,\n"
"fonts, spell checkers, etc. for that language will be installed.\n"
"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
"system to use unicode (UTF-8). Note however that this is an experimental\n"
"feature. If you select different languages requiring different encoding the\n"
"unicode support will be installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Ditt valg av foretrukket spr�k vil p�virke spr�ket til dokumentasjonen,\n"
"installasjonsrutinen og systemet generelt. Velg f�rst regionen du befinner\n"
"deg i, og deretter spr�ket du bruker.\n"
"\n"
"Om du klikker p� \"Avansert\" knappen f�r du mulighet til � velge andre\n"
"spr�k som du �nsker � installere p� din arbeidsstasjon. Du installerer da\n"
"samtidig de spr�kspesifikke filene for systemdokumentasjon og\n"
"applikasjoner. Hvis du �nsker Norsk som standardspr�k, men ogs�\n"
"�nsker � tilrettelegge for spanske brukere p� maskinen, kan du velge\n"
"Norsk som standardspr�k, og Spansk under \"Avansert\". \n"
"\n"
"Legg merke til at du ikke er begrenset til et enkelt tilleggsspr�k. Du\n"
"kan velge flere, eller til og med all ved � sjekke av i \"Alle spr�k\"-"
"boksen.\n"
"Ved valg av spr�kst�tte s� menes oversettelser, skrifttyper, "
"stavekontroller,\n"
"etc. for spr�ket som vil bli installert.\n"
"I tillegg s� kan du tvinge systemet til � bruke unicode (UTF-8) ved � sjekke "
"av\n"
"for \"Bruk Unicode som standard\"-sjekkboksen. Uansett s� b�r du merke deg\n"
"at dette er en eksperimentell finesse. Hvis du velger forskjellige som spr�k "
"som\n"
"krever forskjellig enkoding, s� vil unicode-st�tten bli installert uansett.\n"
"\n"
"For � bytte mellom de installerte spr�kene p� systemet, kan du starte\n"
"programmet \"/usr/sbin/localedrake\" som root for � bytte spr�ket som\n"
"systemet bruker. Dersom denne kommandoen kj�res som andre\n"
"brukere p�virker det bare spr�ket for denne brukeren."

#: ../../help.pm:1
#, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you might not have a keyboard that corresponds exactly to your language:\n"
"for example, if you are an English speaking Swiss person, you may have a\n"
"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
"find yourself in the same situation where your native language and keyboard\n"
"do not match. In either case, this installation step will allow you to\n"
"select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"More \" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Avhengig av standardspr�ket du har valgt, vil DrakX automatisk velge\n"
"et tastaturoppsett. I enkelte tilfeller kan det v�re at du ikke har et \n"
"tastatur som korresponderer med det spr�ket du har valgt som standard.\n"
"For eksempel, dersom du er en engelsktalende sveistsisk person, kan\n"
"det v�re at du har et sveitsisk tastatur. I slike tilfeller vil dette\n"
"installasjonstrinnet la deg velge et passende tastatur fra en liste.\n"
"\n"
"Klikk p� \"Mer\" knappen for � f� en liste over st�ttede tastatur.\n"
"\n"
"HVis du velger et tastatur som ikke er basert p� det latinske alfabetet,\n"
"vil den neste dialogen tillate at du setter opp en tastekombinasjon\n"
"som vil bytte mellom latin og ikke-latinsk tastaturoppsett."

#: ../../help.pm:1
#, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"Install\": For the most part, this completely wipes out the old\n"
"system. If you wish to change how your hard drives are partitioned, or\n"
"change the file system, you should use this option. However, depending on\n"
"your partitioning scheme, you can prevent some of your existing data from\n"
"being over- written.\n"
"\n"
" * \"Upgrade\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
"Dette trinnet blir bare aktivert dersom det blir funnet en eksisterende\n"
"GNU/Linux partisjon p� maskinen din.\n"
"\n"
"DrakX trenger � vite om du vil utf�re en ny installasjon eller en "
"oppgradering\n"
"av et eksisterende Mandrake Linux system.\n"
"\n"
" * \"Installer\": Dette vil stort sett slette hele det gamle systemet. "
"Dersom du\n"
"�nsker � forandre hvordan harddiskene blir partisjonert, eller forandre p�\n"
"filsystemene, b�r du velge dette. Avhengig av hvordan du partisjonerer kan\n"
"eventuelt noen av de gamle dataene beholdes. \n"
"\n"
" * \"Oppgrader\": Denne installasjonsklassen lar deg oppgradere pakkene som\n"
"er installert p� ditt n�v�rende Mandrake Linux system. Dine n�v�rende\n"
"partisjoner og brukerdata blir ikke ber�rt. De fleste andre "
"konfigurasjonstrinn\n"
"forblir tilgjengelige, i likhet med en standard installasjon.\n"
"\n"
"\"Oppgrader\" valget skal fungere p� Mandrake Linux systemer som kj�rer\n"
"versjon 8.1 eller nyere. Oppgradering av versjoner tidligere enn 8.1 er "
"ikke\n"
"anbefalt. "

#: ../../help.pm:1
#, c-format
msgid ""
"\"Country\": check the current country selection. If you are not in this\n"
"country, click on the \"Configure\" button and choose another one. If your\n"
"country is not in the first list shown, click the \"More\" button to get\n"
"the complete country list."
msgstr ""
"\"Land\": Sjekk ditt valg av land. Dersom du ikke befinner deg i dette "
"landet,\n"
"Klikk p� \"Konfigurer\" knappen og velg et annet. Dersom ditt land ikke er "
"i\n"
"den f�rste lista, klikk p� \"Mer\" knappen for � f� den fullstendige lista. "

#: ../../help.pm:1
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Mer enn en Microsoft Windows partisjon har blitt\n"
"oppdaget p� harddisken din. Vennligst velg den du �nsker � endre st�rrelsen "
"p� for �\n"
"installere ditt nye Mandrake Linux operativsystem.\n"
"\n"
"\n"
"For informasjon, hver partisjon er listet som f�lger: \"Linux navn\", "
"\"Windows\n"
"navn\" \"Kapasitet\".\n"
"\n"
"\"Linux navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
"\"partisjon nummer\" (f.eks., \"hda1\").\n"
"\n"
"\n"
"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
"\"\n"
"hvis den er en SCSI harddisk.\n"
"\n"
"\n"
"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
"IDE harddisker:\n"
"\n"
"   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
"\n"
"   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
"\n"
"Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
"\"sekund�r harddisk\", etc.\n"
"\n"
"\"Windows navn\" er bokstaven p� harddisken din under Windows (den f�rste "
"disken\n"
"eller partisjonen er kalt \"C:\")."

#: ../../help.pm:1
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive\n"
"\n"
" * \"Auto allocate\": this option enables you to automatically create ext3\n"
"and swap partitions in free space of your hard drive\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery, if necessary. It is strongly\n"
"recommended that you perform this step.\n"
"\n"
" * \"Restore partition table\": allows you to restore a previously saved\n"
"partition table from a floppy disk.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"doesn't always work.\n"
"\n"
" * \"Reload partition table\": discards all changes and reloads the\n"
"partition table that was originally on the hard drive.\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good\n"
"understanding of partitioning.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information about the\n"
"hard drive.\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"P� dette punktet m� du velge hvilke partisjon(er) som skal brukes til �\n"
"installere ditt nye Mandrake Linux system. Hvis partisjone allerede har\n"
"blitt definert (fra en tidligere installasjon av GNU/Linux eller fra et "
"annet\n"
"partisjoneringsverkt�y), kan du bruke eksisterende partisjoner. I andre\n"
"tilfeller m� harddiskpartisjoner defineres.\n"
"\n"
"For � opprette partisjoner m� du f�rst velge en harddisk. Du kan velge disk\n"
"for partisjonering ved � klikke p� \"hda\" for den f�rste IDE disken, \"hdb"
"\"\n"
"for den andre eller \"sda\" for den f�rste SCSI disken osv.\n"
"\n"
"For � partisjonere den valgte harddisken kan du bruke disse valgene:\n"
"\n"
" * \"Fjern alle\": dette valget sletter alle partisjoner tilgjengelig p� "
"den\n"
"valgte harddisken.\n"
"\n"
" * \"Automatisk allokering\": dette valget lar deg automatisk opprette ext3 "
"og\n"
"swappartisjoner p� den ledige plassen p� harddisken din.\n"
"\n"
" * \"Mer\": gir deg tilgang til ekstra finesser:\n"
"\n"
" * \"Gjenopprett partisjonstabell\": gir deg muligheten til � gjenopprette "
"en\n"
"tidligere lagret partisjonstabell fra en diskett.\n"
"\n"
" * \"Lagre partisjonstabell\": hvis du �nsker � lagre partisjonstabellen din "
"p�\n"
"en diskett for � kunne gjenopprette denne senere kan du bruke dett valget.\n"
"Det anbefales p� det sterkeste � bruke dette valget.\n"
"\n"
" * \"Redd partisjonstabell\": hvis partisjonstabellen din er skadet kan du\n"
"fors�ke � redde den ved � bruke dette valget. V�r forsiktig og husk at\n"
"det kan g� galt.\n"
"\n"
" * \"Last inn partisjonstabell p� nytt\": avskaff alle forandringer og last "
"inn din opprinnelige partisjonstabell. \n"
"\n"
" * \"Flyttbart medium automontering\": ved � sjekk av dette valget,\n"
"s� vil brukere bli n�dt til � manuelt montere og avmontere flyttbare medium\n"
"som disketter og CDer.\n"
"\n"
" * \"Veiviser\": bruk dette valget om du vil bruke en veiviser for �\n"
"partisjonere harddisken din. Dette er anbefalt om du ikke har gode nok\n"
"kunnskaper om partisjonering.\n"
"\n"
" * \"Angre\": du kan bruke dette valget til kanselere endringene dine.\n"
"\n"
" * \"G� til normal/ekspertmodus\": gir deg ekstra valg under partisjoneringa "
"(type, valg, format)\n"
"og gir deg mere informasjon.\n"
"\n"
" * \"Ferdig\": n�r du er ferdig med � partisjonere harddisken din bruk dette "
"valget til � lagre endringene dine.\n"
"\n"
"Merk: du kan n� valgene ved � bruke tastaturet: naviger gjennom partisjonene "
"ved � bruke [Tab] og [Opp/Ned]-pitastene.\n"
"\n"
"N�r en partisjon er valgt kan du bruke:\n"
"\n"
" * Ctrl-c til � opprette en ny partisjon (n�r en tom partisjon er valgt).\n"
"\n"
" * Ctrl-d til � slette en partisjon.\n"
"\n"
" * Ctrl-m til � sette monteringspunktet.\n"
"\n"
"For � f� informasjon om de forskjellige filsystemene som er tilgjengelige,\n"
"vennlist les ext2FS-kapittelet fra ``Reference Manual''.\n"
"\n"
"Hvis du installerer p� en PPC-maskin, s� vil du nok lage en liten\n"
"HFS'bootstrap-partisjon' p� minst en megabyte for bruk\n"
"av yaboot oppstartslasteren. Hvis du �nsker  � lage partisjonen litt "
"st�rre,\n"
"la oss si 50 MB, s� kan du lagre en ekstra kjene og ramdiskbilde for\n"
"n�dsituasjoner."

#: ../../help.pm:1
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"P� dette punktet s� vil DrakX la deg velge sikkerhetsniv�et som er �nsket "
"for\n"
"maskinen. Som en tommelfingerregel, jo mere utsatt maskinen er, og jo mere\n"
"viktig data som er lagret der, jo h�yere b�r sikkerhetsniv�et v�re.\n"
"Men, et h�yere sikkerhetsniv� g�r gjerne p� beskostning av "
"brukervennligheten.\n"
"\n"
"Hvis du ikke vet hva du skal velge, behold standardvalget."

#: ../../help.pm:1
#, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
"if you have a working Internet connection, or \"No\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"Yes\" will display a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. A package-selection tree will\n"
"appear: review the selection, and press \"Install\" to retrieve and install\n"
"the selected package(s), or \"Cancel\" to abort."
msgstr ""
"N�r du installerer Mandrake Linux, er det sannsynlig at enkelte pakker\n"
"er blitt oppdatert siden denne versjonen ble sluppet. noen feil kan ha\n"
"blitt fikset, eller sikkerhetsproblemer l�st. For at du skal f� utnytte\n"
"disse forbedringene kan du n� laste dem ned fra internett. Velg \"Ja\"\n"
"dersom du har en fungerende internettforbindelse, eller \"Nei\" dersom\n"
"du heller vil installere oppdateringene senere.\n"
"\n"
"N�r du velger \"Ja\" f�r du en liste over tjenere som oppdateringene kan\n"
"lastes ned fra. Velg den som er n�rmest deg. Et pakkevalgstre vil da \n"
"dukke opp. G� gjennom valgene, og klikk \"Installer\" for � hente og\n"
"installere de valgte pakkene. Du kan ogs� klikke \"Avbryt\" for � avbryte\n"
"dette trinnet. "

#: ../../help.pm:1
#, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"Next ->\" when you are ready to format partitions.\n"
"\n"
"Click on \"<- Previous\" if you want to choose another partition for your\n"
"new Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""
"Nye partisjoner m� formateres f�r de kan brukes (formatering betyr\n"
"� lage et filsystem).\n"
"\n"
"P� dette tidspunktet kan dte hende du �nsker � reformatere enkelte\n"
"eksisterende partisjoner for � slette data p� disse. Hvis du �nsker �\n"
"gj�re dette, kan du velge disse partisjonene ogs�.\n"
"\n"
"Legg merke til at det ikke er n�dvendig � formatere alle eksisterende\n"
"partisjoner. Du m� reformatere partisjonene som skal inneholde\n"
"operativsystemet (som \"(\", \"/usr\" eller \"/var\"), men du trenger ikke\n"
"reformatere partisjoner som inneholder data du vil beholde\n"
"(typisk \"/home\").\n"
"\n"
"V�r forsiktig n�r du velger partisjoner. Etter formatering vil alle data\n"
"p� de valgte partisjonene bli slettet uten at du kan hente dataene\n"
"tilbake.\n"
"\n"
"Klikk \"Neste ->\" n�r du er klar til � formatere partisjonene.\n"
"\n"
"Klikk \"<- Forrige\" om du vil velge andre partisjoner for din installasjon\n"
"av Mandrake Linux. "

#: ../../help.pm:1
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
"you should see after your computer has finished doing its hardware tests is\n"
"the bootloader menu, giving you the choice of which operating system to\n"
"start.\n"
"\n"
"The \"Advanced\" button shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"that will automatically perform a whole installation without the help of an\n"
"operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation. The\n"
"partitioning step is the only interactive procedure.\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"Save packages selection\"(*): saves a list of the package selected in\n"
"this installation. To use this selection with another installation, insert\n"
"the floppy and start the installation. At the prompt, press the [F1] key\n"
"and type >>linux defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"S�nn! Installasjonen er n� ferdig og ditt flunkende nye GNU/Linux system\n"
"er n� klart til bruk. Klikk \"Neste\" for � restarte systemet. Det f�rste du "
"vil\n"
"se etter at maskinen er ferdig med oppstartstesteneer oppstartslasterens\n"
"meny, som lar deg velge hvilket operativsystem du vil starte.\n"
"\n"
"\"Avansert\" knappen vil vise to nye knapper:\n"
"\n"
" * \"Lag autoinstallasjonsdiskett\": For � lage en installasjonsdiskett som\n"
"automatisk vil utf�re en installasjon uten operat�rhjelp, helt lik den\n"
"installasjonen du nettopp har utf�rt.\n"
"\n"
"   To knapper vil v�re tilgjengelige etter at denne trykkes:\n"
"\n"
"    * \"Replay\": Dette er en delvis automatisert installasjon. "
"Partisjonering er\n"
"den eneste interaktive prosedyren.\n"
"\n"
"    * \"Automatisert\": Dette er en fullstendig automatisert installasjon.\n"
"Harddisken vil bli helt overskrevet, og alle data vil bli overskrevet.\n"
"\n"
"   Denne funksjonen er nyttig n�r du skal installere et antall identiske "
"maskiner.\n"
"Se Auto-installasjonsavsnittet p� v�re vevsider for mer informasjon.\n"
"\n"
" * \"Lagre pakkevalg\" (*): Lagrer en liste over pakkene som er blitt "
"installert\n"
"under denne installasjonen. For � benytte denne lista under en annen\n"
"installasjon, sett inn disketten og start installasjonen. N�r "
"kommandopromptet\n"
"kommer opp, trykk p� F1-tasten og skriv: \"linux defcfg=\"floppy\" <<\n"
"\n"
"(*) Du trenger en FAT-formatert diskett (for � lage en under GNU/Linux, "
"skriv\n"
"\"mformat a:\". "

#: ../../help.pm:1
#, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"Use free space\": this option will perform an automatic partitioning\n"
"of your blank drive(s). If you use this option there will be no further\n"
"prompts.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated with\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and for the most part it's a good idea to keep them.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
"without the loss of any data, provided you previously defragment the\n"
"Windows partition and that it uses the FAT format. Backing up your data is\n"
"strongly recommended.. Using this option is recommended if you want to use\n"
"both Mandrake Linux and Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful, because you will not be able to\n"
"undo your choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Custom disk partitioning\": choose this option if you want to manually\n"
"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
"choice and you can very easily lose all your data. That's why this option\n"
"is really only recommended if you have done something like this before and\n"
"have some experience. For more instructions on how to use the DiskDrake\n"
"utility, refer to the ``Managing Your Partitions '' section in the\n"
"``Starter Guide''."
msgstr ""
"Du m� n� avgj�re hvor p� din(e) harddisk(er) du �nsker � installere\n"
"Mandrake Linux. Hvis din harddisk er tom, eller et eksisterende\n"
"operativsystem benytter all plassen som er tilgjengelig, vil du bli n�dt\n"
"til � ompartisjonere harddisken(e). Partisjonering av en harddisk vil si\n"
"� dele den inn i logiske enheter for � skape plassen som trengs for �\n"
"installere det nye Mandrake Linux systemet.\n"
"\n"
"Ettersom partisjoneringsprosessen ikke er reversibel, og kan f�re til tapte\n"
"data hvis det allerede finnes et operativsystem p� disken, kan "
"partisjonering\n"
"virke skremmende dersom du er en uerfaren bruker. Heldigvis har DrakX en\n"
"veiviser som forenkler denne prosessen. F�r du fortsetter installasjonen, "
"b�r\n"
"du lese gjennom resten av denne teksten, og ikke minst: Ta deg god tid.\n"
"\n"
"Avhengig av din disk-konfigurasjon, er flere valg tilgjengelige:\n"
"\n"
" * \"Benytt ledig plass\": Dette valget utf�rer automatisk partisjonering av "
"dine\n"
"harddisker. Dersom du velger dette, vil det ikke komme flere sp�rsm�l.\n"
"\n"
" * \"Benytt eksisterende partisjon\": Veiviseren har funnet en eller flere "
"linux-\n"
"partisjoner p� disken(e) dine. Hvis du vil bruke disse, velg denne "
"opsjonen. \n"
"Du vil bli spurt om � angi monteringspunkter for hver partisjon. De "
"allerede\n"
"oppsatte monteringspunktene er valg som standard, og det er normalt lurt\n"
"� beholde disse valgene.\n"
"\n"
" * \"Benytt ledig plass p� windows partisjon\": Dersom du har installert\n"
"Microsoft Windows p� din harddisk, og denne bruker all tilgjengelig plass,\n"
"m� du lage ledig plass for Linux. For � oppn� dette, kan du enten slette\n"
"hele windowspartisjonen med tilh�rende data (Se \"Slett hele disken\" "
"valget),\n"
"eller forandre st�rrelsen p� din windowspartisjon, forutsatt at du har\n"
"defragmentert windowspartisjonen, og at den benytter FAT-filsystemet. Det\n"
"anbefales sterkt at du kj�rer backup av dine data. Dette valget er anbefalt\n"
"dersom du �nsker � kj�re b�de Windows og Mandrake Linux p� din maskin.\n"
"\n"
"   F�r du velger denne opsjonen, skal du v�re klar over at din windows-\n"
"partisjon vil v�re mindre etterp�, og at du derfor vil ha mindre ledig plass "
"i\n"
"windows til � lagre data eller installere ny programvare.\n"
"\n"
" * \"Slett hele disken\": Hvis du �nsker � slette alle partisjoner og data, "
"og\n"
"erstatte dem med ditt nye Mandrake Linux system, velg dette. V�r forsiktig,\n"
"du vil ikke kunne gj�re om dette etter at du har bekreftet.\n"
"\n"
"   !! Hvois du velger dette valget, vil du miste alle data p� "
"harddisken. !!\n"
"\n"
" * \"Tilpasset partisjonering\": Velg dette dersom du vil partisjonere "
"disken\n"
"manuelt. V�r forsiktig -- dette er en kraftig, men farlig operasjon, og du "
"kan\n"
"lett miste alle dine eksisterende data. Derfor er dette valget kun anbefalt\n"
"dersom du har gjort dette f�r, og har en del erfaring. For mer veiledning i\n"
"hvordan dette trinnet utf�res, se oppstartsguidens kapittel om "
"partisjonering."

#: ../../help.pm:1
#, c-format
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""
"Til slutt vil du bli spurt om du �nsker � starte det grafiske grensesnittet\n"
"n�r maskinen starter. Dette sp�rsm�let vil bli stilt selv om du velger �\n"
"ikke teste konfigurasjonen til det grafiske grensesnittet. Du vil selvsagt\n"
"�nske � svare \"Nei\" dersom maskinen skal fungere som tjener, eller\n"
"hvis du ikke kunne konfigurere det grafiske grensesnittet."

#: ../../help.pm:1
#, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""
"I tilfelle det er flere tjenere tilgjengelig for ditt kort, enten med eller "
"uten\n"
"3D-akselerasjon, blir du s� spurt om � velge den tjeneren som best\n"
"passer dine behov."

#: ../../help.pm:1
#, c-format
msgid ""
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""
"Oppl�sning\n"
"\n"
"   Du kan her velge oppl�sning og fargedybde blant de som er tilgjengelige\n"
"for din maskinvare. Velg den du syns best passer til dine behov (Du kan\n"
"forandre dette etter installasjon). En pr�ve av den valgte konfigurasjonen\n"
"er vist i skjermen. "

#: ../../help.pm:1
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own."
msgstr ""
"Skjerm\n"
"\n"
"   Installasjonsrutinen kan vanligvis automatisk oppdage og sette opp\n"
"skjermen som er koblet til maskinen din. Dersom dette ikke fungerer, kan\n"
"du velge fra denne lista hvilken skjerm du har. "

#: ../../help.pm:1
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented the list of different parameters to change to get an\n"
"optimal graphical display: Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"Yes\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   You can here choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"No\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (X Window System) er hjertet i GNU/Linux sitt grafiske grensesnitt som\n"
"alle de grafiske milj�ene (KDE, GNOME Afterstep, Windowmaker etc.)\n"
"som f�lger med GNU/Linux er avhengige av.\n"
"\n"
"Du vil f� en liste med forkjellige parametre som kan forandres for � f� et\n"
"optimalt grafisk grensesnitt.\n"
"\n"
"Skjermkort\n"
"   Installasjonsrutinen kan vanligvis automatisk oppdage og konfigurere "
"skjermkortet\n"
"som er installert i din maskin. Dersom dette ikke er mulig, kan du velge \n"
"kortet fra denne listen manuelt.\n"
"\n"
"   I tilfelle det er flere tjenere tilgjengelig for ditt kort, med eller "
"uten\n"
"3D-akselerasjon, vil du s� kunne velge den tjeneren som best passer\n"
"dine behov.\n"
"\n"
"\n"
"\n"
"Skjerm\n"
"\n"
"Installasjonsrutinen kan normalt automatisk oppdage og konfigurere skjermen "
"som\n"
"er koblet til skjermkortet. Hvis dette ikke er mulig, kan du velge fra "
"listen\n"
"hvilken skjerm du har.\n"
"\n"
"\n"
"\n"
"Oppl�sning\n"
"\n"
"  Her kan du velge hvilke oppl�sninger og fargedybder du vil bruke fra de "
"som\n"
"er tilgjengelige for din maskinvare. Velg den kombinasjonen som best passer\n"
"dine behov (Du kan forandre dette etter installasjon). En pr�ve av den "
"valgte\n"
"konfigurasjonen vil vises i skjermen.\n"
"\n"
"\n"
"\n"
"   Systemet vil fors�ke � starte det grafiske grensesnittet i den valgte\n"
"oppl�sningen. Dersom du kan se meldingen som vises under testen og \n"
"svarer \"Ja\" Vil DrakX fortsette til neste trinn. Hvis du ikke kan se "
"meldingen\n"
"betyr det at en del av konfigurasjonen er gal, og testen vil avsluttes etter "
"12\n"
"sekunder. Du vil da bli tatt tilbake til menyen. Forandre innstillingene til "
"du f�r\n"
"et oppsett som fungerer. \n"
"\n"
"\n"
"\n"
"Valg\n"
"\n"
"   Her kan du velge om du vil at maskinen automatisk skal starte det "
"grafiske\n"
"grensesnittet n�r maskinen starter. Du vil selvsagt ikke �nske � gj�re "
"dette\n"
"dersom maskinen skal fungere som en tjener, eller om du ikke klarte �\n"
"konfigurere det grafiske grensesnittet."

#: ../../help.pm:1
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""
"Skjermkort\n"
"\n"
"   Installasjonsrutinen kan vanligvis automatisk finne og sette opp "
"skjermkortet\n"
"som er installert i maskinen din. Hvis dette ikke lar seg gj�re, kan du "
"velge\n"
"hva slags kort du har i denne lista.\n"
"\n"
"   I tilfelle det er flere tjenere tilgjengelige for ditt kort, med eller "
"uten 3D-\n"
"akselerasjon, kan du velge tjeneren som best passer dine behov."

#: ../../help.pm:1
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
"system clock and the hardware clock are in the same timezone. This is\n"
"useful when the machine also hosts another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization \" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. For this\n"
"feature to work, you must have a working Internet connection. It is best to\n"
"choose a time server located near you. This option actually installs a time\n"
"server that can used by other machines on your local network."
msgstr ""
"GNU/Linux passer tiden i GMT (Greenwich Mean Time), og oversetter denne\n"
"ti llokal tid avhengig av tidssonen du valgte. Dersom klokka p� ditt "
"hovedkort\n"
"er satt til lokal tid, kan du deaktivere dette ved � velge bort "
"\"Maskinvareklokka\n"
"satt til GMT\", som lar GNU/Linux vite at systemklokka og maskinvareklokka\n"
"er i samme tidssone. Dette er nyttig n�r maskinen din har andre operativ-\n"
"systemer som Microsoft Windows.\n"
"\n"
"\"Automatisk tidssynkronisering\" opsjonen vil stille klokka di ved � koble "
"seg\n"
"til en ekstern tidstjener p� internett. For at dette skal fungere, m� du ha "
"en\n"
"internettforbindelse som fungerer. Det er best � velge en tidstjener som er\n"
"i n�rheten av deg. Denne opsjonen installerer dessuten en tidstjener som\n"
"kan brukes av andre maskiner p� ditt lokale nettverk. "

#: ../../help.pm:1
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not always needed at\n"
"boot time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Denne dialogen benyttes til � velge hvilke tjenester som skal startes n�r\n"
"maskinen startes.\n"
"\n"
"DrakX vil liste opp alle tjenestene som er tilgjengelige i den nye "
"installasjonen.\n"
"G� n�ye gjennom hver enkelt og fjern haken p� de som ikke er n�dvendige �\n"
"starte.\n"
"\n"
"En kort forklarende tekst vil vise for hver tjeneste n�r den velges. Dersom "
"du\n"
"ikke er sikker p� om en tjeneste er n�dvendig, er det sikrest � la det "
"forh�nds-\n"
"valgte alternativet st�.\n"
"\n"
"!! p� dette tidspunktet b�r du v�re forsiktig dersom du �nsker � bruke "
"maskinen\n"
"som tjener: Du vil sannsynligvis ikke �nske � starte tjenester som du ikke "
"trenger.\n"
"Husk at noen tjenester kan representere en sikkerhetsrisiko dersom de er\n"
"tilgjengelige p� en tjener. Generelt b�r du kun skru p� tjenester som du\n"
"trenger."

#: ../../help.pm:1
#, c-format
msgid ""
"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation."
msgstr ""
"\"Skriver\": Klikk p� \"Konfigurer\" knappen for � �pne skriverveiviseren.\n"
"Konsulter det korresponderende kapitlet i oppstartsguiden for mer\n"
"informasjon om hvordan du setter opp en skriver. Grensesnittet som\n"
"brukes her er tilsvarende det som benyttes under installasjon."

#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"Next\n"
"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
"also choose not to configure the network, or to do it later, in which case\n"
"clicking the \"Cancel\" button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Du kan n� sette opp din internett/nettverksforbindelse. Hvis du �nsker\n"
"� koble maskinen din til internett eller et lokalt nettverk, klikk \"Neste ->"
"\".\n"
"Mandrake Linux vil fors�ke � automatisk oppdage dine nettverksenheter og\n"
"modem. Dersom deteksjonen ikke fungerer, fjern haken for autodeteksjon.\n"
"Du kan ogs� velge � ikke sette opp nettverket, du kan da klikke \"Avbryt\"\n"
"knappen for � g� videre.\n"
"\n"
"N�r du setter opp nettverket ditt, er de tilgjengelige valgene: Vanlig "
"modem,\n"
"ISDN modem, ADSL forbindelse, Kabelmodem, og til slutt vanlig LAN\n"
"forbindelse (Ethernet).\n"
"\n"
"Vi vil ikke g� i detalj p� hver enkelt opsjon, men du m� s�rge for at du "
"har\n"
"alle tilgjengelige parameter, slik som IP adresse, gatweay, DNS servere, "
"etc\n"
"fra din tjenesteleverand�r eller systemadministrator.\n"
"\n"
"Du kan konsultere oppstartsguidens kapittel om internettforbindelse for "
"flere\n"
"detaljer, eller vente til systemet er installert og bruke programmene som "
"er\n"
"beskrevet i oppstartsguiden for � sette opp din forbindelse. "

#: ../../help.pm:1
#, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
"which appears whenever the installer automatically selects a package to\n"
"resolve a dependency issue. Some packages have relationships between each\n"
"other such that installation of a package requires that some other program\n"
"is already installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Til slutt, avhengig av ditt valg av om du vil velge enkeltpakker eller\n"
"ikke, s� vil du f� se ett tre som inneholder alle pakkene sortert p� "
"grupper\n"
"og undergrupper. N�r du surfer gjennom treet, kan du velge grupper, \n"
"undergrupper eller individuelle pakker.\n"
"\n"
"N�r du velger en pakke i treet, vil en beskrivelse dukke opp til h�yre. \n"
"N�r du er ferdig med � velge, klikk \"Installer\" knappen som da vil starte\n"
"installasjonsprosessen. Avhengig av hastigheten p� din maskin, og antall\n"
"pakker som skal installeres, kan det ta en stund � gj�re ferdig "
"installasjonen.\n"
"Ett estimat p� hvor lang tid det vil ta vises p� skjermen for � hjelpe deg "
"�\n"
"avgj�re om du har tid til en kopp kaffe.\n"
"\n"
"!! Hvis en tjenerpakke har blitt valgt, vil du bli bedt om � bekrefte at du "
"�nsker\n"
"� installere denne. Under Mandrake Linux vil alle installerte tjenere bli \n"
"startet ved oppstart. Selv om de er sikre og ikke har noen kjente "
"sikkerhetshull\n"
"n�r denne distribusjonen ble sluppet, s� kan det v�re at sikkerhetshull "
"ble \n"
"oppdaget etter at denne versjonen av Mandrake Linux ble sluppet. Hvis du\n"
"ikke vet hva en type tjener gj�r, eller hvorfor den blir installert, klikk "
"\"Nei\".\n"
"\"Ja\" vil installere tjeneren(e) og de(n) vil bli started automatisk som "
"standard.\n"
"\n"
"\"Automatiske avhengigheter\" valget bare fjerner advarselsdialogboksen som\n"
"kommer n�r installasjonsprogrammet automatisk velger en pakke. Dette skjer "
"fordi\n"
"den har funnet ut at den m� tilfredsstille en avhengighet med en annen pakke "
"for\n"
"� fullstendig gjennomf�re installasjonen.\n"
"\n"
"Det lille diskettikonet p� bunnen av listen lar deg laste pakkelisten som du "
"valgte\n"
"under en tidligere installasjon. N�r du klikker p� dette ikonet vil du bli "
"bedt om �\n"
"sette inn disketten som ble laget under avslutningen av en annen "
"installasjon. Se\n"
"det andre tipset for det siste skrittet for � se hvordan du lager en slik "
"diskett."

#: ../../help.pm:1
#, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various containers, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' container installed.\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the applications that are in the workstation\n"
"container.\n"
"\n"
" * \"Development\": if plan on using your machine for programming, choose\n"
"the appropriate packages from the container.\n"
"\n"
" * \"Server\": if your machine is intended to be a server, select which of\n"
"the more common services you wish to install on your machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server.\n"
"\n"
" * \"Truly minimal install\": will install the absolute minimum number of\n"
"packages necessary to get a working Linux system. With this installation\n"
"you will only have a command line interface. The total size of this\n"
"installation is 65 megabytes.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Det er n� p� tide � spesifisere hvilke programmer du �nsker � installere p�\n"
"systemet ditt. Det er tusenvis av pakker tilgjengelig for Mandrake Linux, "
"for\n"
"� gj�re det enklere � h�ndtere pakkene s� har de blitt plassert i grupper "
"med\n"
"lignende applikasjoner.\n"
"\n"
"Pakkene er delt inn i grupper som korresponderer til typisk bruk av din "
"maskin.\n"
"Mandrake Linux har fire forh�ndsdefinerte installasjoner tilgjengelige. Du "
"kan\n"
"tenke p� disse installasjonsklassene som kontainere for forskjellige "
"pakker.\n"
"Du kan mikse og matche applikasjoner fra forskjellige kontainere, s� en\n"
"``Arbeidsstasjon''-installasjon kan fortsatt ha applikasjoner fra\n"
"``Utvikling''-kontainer installert.\n"
"\n"
" *�\"Arbeidsstasjon\": hvis du planlagger � bruke din maskin som "
"arbeidsstasjon, velg\n"
"en eller flere av applikasjonene som er i arbeidsstasjon-kontaineren.\n"
"\n"
" * \"Utvikling\": hvis maskinen skal brukes til programmering, velg de "
"�nskede\n"
"pakkene fra kontaineren.\n"
"\n"
" * \"Tjener\": hvis maskinen skal brukes som tjener, velg vilke av de mest "
"vanlige\n"
"tjenester som du �nsker installert p� din maskin.\n"
"\n"
" * \"Grafisk milj�\": til slutt, det er her du kan velge ditt �nskede "
"grafiske milj�. Du\n"
"m� velge minst ett hvis du �nsker � ha ett grafisk grensesnitt "
"tilgjengelig.\n"
"\n"
"Ved � flytte musepekeren over et gruppenavn vil en kort forklarende tekst\n"
"dukke opp over den gruppen. Hvis du �nsker � ikke velge noen grupper under\n"
"installasjon (og du ikke oppgraderer), s� vil en dialog sp�rre deg om hva\n"
"slags minimal installasjon du �nsker:\n"
"\n"
"* \"Med X\": installer s� minimalt antall pakker som mulig for � ha et "
"fungerende\n"
"grafisk skrivebrod.\n"
"\n"
" * \"Med grunnleggende dokumentasjon\": installerer basesystemet pluss "
"standard\n"
"verkt�y og dokumentasjon for disse. Denne installasjonen passer til � sette\n"
"opp en server.\n"
"\n"
" * \"Virkelig minimal installasjon\" vil installere det absolutte minimum "
"som er\n"
"n�dvendig for � f� Linux systemet opp og g�. Med denne installasjonen s� vil "
"du\n"
"kun ha et kommandolinje-grensesnitt. Denne installasjonen er p� 65 "
"megabyte.\n"
"\n"
"Du kan sjekke av \"Individuelt pakkevalg\" boksen, som er nyttig hvis du "
"kjenner\n"
"til pakkene som blir tilbydt eller hvis du �nsker � ha total kontroll over "
"hva som\n"
"vil bli installert.\n"
"\n"
"Hvis du startet installasjonen i \"Oppgrader\"-modus, kan du velge vekk "
"alle\n"
"grupper for � unng� � installere noen nye pakker. Dette er nyttig for\n"
"reparasjon eller oppdatering av et eksisterende system."

#: ../../help.pm:1
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n"
"vet om en pakke er p� en annen CDROM og vil spytte ut den v�v�rende\n"
"CD og be deg sette i en den rette CD'en som kreves."

#: ../../help.pm:1
#, c-format
msgid ""
"Here are Listed the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Her er de eksisterende Linux partisjonene som ble oppdaget p� din harddisk.\n"
"Du kan beholde valgene som er gjort av veiviseren, de er gode for de fleste\n"
"vanliege installasjoner. Hvis du endrer disse valgene, m� du i hvertfall "
"definere\n"
"en root-partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke "
"kunne\n"
"installere nok programvare. Hvis du �nsker � lagre dine data p� en separat\n"
"partisjon m� du ogs� velge en \"/home\" (bare mulig hvis du har mer enn en\n"
"Linux partisjon tilgjengelig).\n"
"\n"
"Hver partisjon er listet som f�lger: \"Navn\", \"Kapasitet\".\n"
"\n"
"\"Navn\" er strukturert som f�lger: \"harddisktype\", \"harddisknummer\",\n"
"\"partisjonsnummer\" (feks. \"hda1\").\n"
"\n"
"\n"
"\"Harddisktype\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd\"\n"
"hvis det er en SCSI harddisk.\n"
"\n"
"\"Harddisknummer\" er alltid en bokstav etter \"hd\" eller \"sd\". ForIDE "
"harddisker:\n"
"\n"
" * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
"\n"
" * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
"\n"
" * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
"\n"
" * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
"\n"
"\n"
"Med SCSI harddisker, en \"a\" betyr \"laveste SCSI-ID\", en \"b\" betyr "
"\"nest laveste SCSI-ID\", etc."

#: ../../help.pm:1
#, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user can have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", which is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configuration, protecting the system from unintentional or malicious\n"
"changes that impact the system as a whole. You will have to create at least\n"
"one regular user for yourself -- this is the account which you should use\n"
"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
"to do anything and everything, it may also be very dangerous! A mistake\n"
"could mean that your system would not work any more. If you make a serious\n"
"mistake as a regular user, the worst that will happen is that you will lose\n"
"some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in and copy it to the \"User name\" field, which is the name this\n"
"user will enter to log onto the system. If you like, you may override the\n"
"default and change the username. The next step is to enter a password. From\n"
"a security point of view, a non-privileged (regular) user password is not\n"
"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
"making it blank or too simple: after all, your files could be the ones at\n"
"risk.\n"
"\n"
"Once you click on \"Accept user\", you can add other users. Add a user for\n"
"each one of your friends: your father or your sister, for example. Click\n"
"\"Next ->\" when you have finished adding users.\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default).\n"
"\n"
"When you are finished adding all users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"Next\n"
"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
"to use this feature?\" box."
msgstr ""
"GNU/Linux er ett flerbrukersystem, og dette betyr at hver bruker kan ha\n"
"sine egne instillinger, sine egne filer osv. Du kan lese ``Starter "
"Guide'''n\n"
"for � l�re mer.\n"
" Men i motsetning til root, som er administratoren, s� vil\n"
"brukerne du legger til her ikke ha rett til � forandre noe annet enn deres\n"
"egne filer og konfigurasjon, noe som beskytter systemet for uheldige\n"
"eller skumle forandringer som endrer hele systemet. Du m� lage minst en\n"
"bruker for deg selv. Denne kontoen b�r du bruke for all vanlig bruk. \n"
"Selv om det er praktisk � logge inn som root for � gj�re alt mulig hver "
"dag,\n"
"kan det ogs� v�re veldig farlig! Den minste feil kan bety at systemet ditt\n"
"ikke lenger virker. Hvis du gj�r en stor feil som en vanlig bruke, s� er "
"det\n"
"verste som kan skje at du mister noe informasjon, men ikke hele systemet.\n"
"\n"
"Det f�rste felter sp�rr etter ditt virkelige navn. Dette er ikke n�dvendig,\n"
"du kan faktisk skrive inn hva du vil. DrakX vil ta det f�rste ordet du "
"legger inn\n"
"og kopiere det til \"Brukernavn\" feltet, som er det navnet den brukeren vil "
"bruke\n"
"for � logge seg p� systemet. Hvis du vil, s� kan du endre brukernavnet. Det\n"
"neste steget blir � sette et passord. Fra ett sikkerhetsmessig �syn, s� er "
"ikke\n"
"en upriviligiert (vanlig) brukers passord s� kritisk som \"root\" sitt, men "
"det er\n"
"ingen grunn til � neglisere det ved � gj�re det blankt eller for enkelt: "
"tross alt,\n"
"dine filer som er i faresonen.\n"
"\n"
"N�r du klikker p� \"Aksepter bruker\", s� kan du legge til flere brukere. "
"Legg\n"
"til en hver og for dine venner, din far eller din s�ster feks.\n"
"Klikke \"Neste ->\" n�r du er ferdig med � legge til brukere.\n"
"\n"
"Ved � klikke p� avansert kan du forandre hvilket \"skall\" brukeren har som\n"
"standard (det vanlige er bash).\n"
"\n"
"N�r du er ferdig med � legge til alle brukerne s� kan du velge en bruker "
"som\n"
"som automatisk kan logge seg p� systemet n�r maskinen starter opp. Hvis\n"
"du er interessert i denne finessen (og ikke bryr deg mye om lokal "
"sikkerhet),\n"
"velg den �nskede brukeren og vindubehandleren, s� klikk p� \"Neste ->\".\n"
"Hvis du ikke er interessert i denne finessen, sjekk ut \"Vil du bruke denne\n"
"finessen?\"-boksen."

#: ../../help.pm:1
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
"computer."
msgstr ""
"F�r du g�r videre b�r du lese lisensen n�ye.\n"
" Den dekker hele\n"
"Mandrake Linux distribusjonen og hvis du ikke er enig med alt den sier,\n"
" klikk p� \"Jeg nekter\" knappen som �yeblikkelig avslutter installasjonen.\n"
"For � fortsette installasjonen, klikk p� \"Jeg aksepterer\" knappen."

#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "Du m� ogs� formatere %s"

#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Kan ikke f� tilgang til kjernemoduler ihht. kjernen din (fil %s mangler), "
"dette betyr vanligvis at oppstartsdisketten din ikke er i synk med "
"installasjonsmediet (vennligst opprett en nyere diskett)"

#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"En feil har oppst�tt - ingen gyldige enheter ble funnet for � opprette nye "
"filsystemer. Vennligst sjekk maskinvaren din for �rsaken til dette problemet"

#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "Feil ved lesing av fil %s"

#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"For � bruke dette valget av pakker, start installasjonen med'linux "
"defcfg=floppy'"

#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Denne disketten er ikke FAT-formatert"

#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Sett inn en FAT-formatert diskett i stasjon %s"

#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan ikke bruke broadcast med intet NIS domene"

#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"De f�lgende pakkene vil bli fjernet for � tillatte oppgradering av systemet "
"ditt: %s\n"
"\n"
" \n"
"�nsker du � fjerne disse pakkene?\n"

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "No"
msgstr "Nei"

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Yes"
msgstr "Ja"

#: ../../install_any.pm:1
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Du har valgt f�lgende tjener(e): %s\n"
"\n"
"\n"
"Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n"
"problemer, men noen nye kan bli funnet. I s� tilfelle m� du oppgradere\n"
"s� snart som mulig.\n"
"\n"
"\n"
"�nsker du virkelig � installere disse tjenerene?\n"

#: ../../install_gtk.pm:1
#, c-format
msgid "System configuration"
msgstr "Systemkonfigurasjon"

#: ../../install_gtk.pm:1
#, c-format
msgid "System installation"
msgstr "Systeminstallasjon"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing down the network"
msgstr "Tar ned nettverket"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "Henter opp nettverket"

#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partisjonering feilet: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX partisjonsveiviseren fant f�lgende l�sninger:"

#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
msgstr "Jeg kan ikke finne noe rom for installering"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Du kan n� partisjonere %s.\n"
"N�r du er ferdig ikke glem � lagre med `w'"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "Bruk fdisk"

#: ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "Egendefinert diskpartisjonering"

#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ALLE eksisterende partisjoner og deres data vil v�re tapt p� disk %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Du har mer enn en harddisk, hvilken �nsker du � installere linux p�?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "Slette hele disken"

#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "Fjern Windows(TM)"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Det finnes ingen FAT partisjon � forandre st�rrelsen p�(eller ikke nok plass "
"igjen)"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"For � sikre dataintegritet etter at partisjonen(e) har blitt endret, \n"
"vil kontroll av filsystemene kj�res neste gang du starter Windows(TM)"

#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Krymping/forst�rring av FAT feilet: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "Beregner Windows filsystemgrense"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "Endrer st�rrelse"

#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "partisjon %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Hvilken st�rrelse �nsker du � beholde vinduer p�?"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ADVARSEL!\n"
"\n"
"DrakX vil n� endre st�rrelsen p� Windows partisjonen din. V�r\n"
"forsiktig: denne operasjonen er farlig. Hvis du ikke allerede har\n"
"gjort det burde du f�rst kj�re scandisk under Windows (og som en\n"
"opsjon kj�re defrag) p� denne partisjonen og ta sikkerhetskopi av dine "
"data.\n"
"N�r du er sikker, trykk Ok."

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"Windows-partisjonen din er for fragmentert, vennligst kj�r ``defrag'' f�rst"

#: ../../install_interactive.pm:1
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Beregner den ledige plassen p� Windows partisjonen"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"St�rrelsesendreren for FAT greide ikke � h�ndtere din partisjon, \n"
"f�lgende feil oppsto: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Hvilken partisjonstype �nsker du � forandre st�rrelse p�?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Bruk den ledige plassen p� Windows partisjonen"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Det finnes ingen FAT partisjon til � bruke som loopback (eller ikke nok "
"plass igjen)"

#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "Veksel-partisjonsst�rrelse i MB: "

#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "Root-partisjonsst�rrelse i MB: "

#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "Velg st�rrelsene"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Hvilken partisjon vil du bruke for Linux4Win?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Bruk Windows partisjonen for loopback"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "Det finnes ingen eksisterende partisjon som kan brukes"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "Bruk eksisterende partisjon"

#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Ikke nok plass til � allokere en ny partisjon"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "Bruk ledig plass"

#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Du m� ha en FAT-parisjonen montert under /boot/efi"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Du har ingen vekselpartisjon\n"
"\n"
"Fortsette likevel?"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Du m� ha en root-partisjon.\n"
"Opprett en partisjon for dette (eller klikk p� en eksisterende).\n"
"Velg s� ``Monteringspunkt'' og  sett dette til `/'"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Noe maskinvare i maskinen din trenger ``riktige'' drivere for � virke.\n"
"Du kan finne noe informasjon om disse her: %s"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Gratulerer, installasjonen er fullf�rt.\n"
"Fjern oppstartsmediet og trykk enter for � starte p� nytt.\n"
"\n"
"\n"
"For informasjon om endringer som er tilgjengelige for denne utgaven av "
"Mandrake Linux,\n"
"sjekk errataen tilgjengelig fra:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informasjon om konfigurering av systemet ditt finnes i post\n"
"install-kapittelet i Official Mandrake Linux User's Guide."

#: ../../install_messages.pm:1
#, c-format
msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr "http://www.mandrakelinux.com/en/91errata.php3"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "Entrer trinn `%s'\n"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Help"
msgstr "Hjelp"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "not configured"
msgstr "ikke konfigurert"

#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
msgid "Configure"
msgstr "Konfigurer"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "Fortsette uansett?"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "Det var en feil ved installering av pakkene:"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "Det var en feil ved endring av pakkenes rekkef�lge:"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Bytt CD!\n"
"\n"
"Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok n�r du er "
"ferdig.\n"
"Hvis du ikke har den trykk Avbryt for � unng� installasjon fra denne CD'en."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "Nekte"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "Godta"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "Installerer pakke %s"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d pakker"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "No details"
msgstr "Ingen detaljer"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "Detaljer"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Vennligst vent, forbereder installasjon"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
msgstr "Tid som gjenst�r "

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "Beregner"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "Installerer"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
msgstr "Velg pakkene du �nsker � installere"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "Minimal installasjon"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "Oppdaterer pakkevalg"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "Lagre p�/hente fra diskett"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "<- Previous"
msgstr "<- Forrige"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "Installer"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "Vis automatisk valgte pakker"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Du kan ikke fjerne denne pakken. Den m� oppgraderes"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Denne pakken m� oppgraderes\n"
"Er du sikker p� at du ikke vil velge denne?"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Du kan ikke fjerne denne pakken, den er allerede installert"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Dette er en bestemt pakke, den kan ikke fjernes"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "Du kan ikke velge/fjerne denne pakken"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "F�lgende pakker vil bli fjernet"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "F�lgende pakker vil bli installert"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Du kan ikke velge denne pakken da det ikke er igjen nok plass til � "
"installere denne"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Importance: %s\n"
msgstr "Viktighet: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Size: %d KB\n"
msgstr "St�rrelse: %d KB\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Version: %s\n"
msgstr "Versjon: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Name: %s\n"
msgstr "Navn: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "D�rlig pakke"

#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Other"
msgstr "Andre"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Total st�rrelse: %d / %d MB"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Next ->"
msgstr "Neste ->"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "Individuelt pakkevalg"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Valg pakkegruppe"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n"
"ved installering av Mandrake Linux. Hvis dette skjer kan du pr�ve tekst- "
"installering\n"
"i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv s� `text'."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "Lagre pakkevalg"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "Automatisert"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "Gj�r igjen"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Autoinstallasjonen kan v�re fullstendig automatisk\n"
"hvis du �nsker det. Den vil da ta over harddisken!!\n"
"(dette er for � installere p� en annen maskin)\n"
"\n"
"Du kanskje �nske � kj�re installasjonen omigjen.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "Oppretter diskett for autoinstallasjon"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Reboot"
msgstr "Restart"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Noen trinn er ikke fullf�rt.\n"
"\n"
"�nsker du virkelig � avslutte n�?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "Oppretter diskett for autoinstallasjon"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Sett inn en tom diskett i stasjon %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Du m� muligens endre din Open Firmware oppstartsenhet for �\n"
" sl� p� oppstartslasteren. Hvis du ikke ser oppstartslasteren ved\n"
" omstart, hold nede Command-Option-O-F ved omstart og skriv:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Skriv s�: shut-down\n"
"Ved din neste oppstart burde du se oppstartslasteren."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Installasjon av oppstartslaster mislykket. F�lgende feil oppsto:"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "Installer oppstartslaster"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Feil ved installasjon av aboot, \n"
"pr�ve � installere selv om det �delegger den f�rste partisjonen?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "�nsker du � bruke aboot?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Det virker som du har en OldWorld eller ukjent\n"
"maskin, yaboot oppstartslasteren vil ikke virke for deg.\n"
"Installasjonen vil fortsette, men du m�\n"
"bruke BootX eller andre m�ter for � starte din maskin."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "Klargj�r oppstartslaster"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "Domeneadministratorpassord"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "Domeneadministrator-brukernavn"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Windows Domain"
msgstr "Windows-domene"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentisering Windows Domene"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"For at dette skal virke p� en Windows 2000 PC, m� du sannsynligvis f�\n"
"administrator til � kj�re kommandoen: \n"
"C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone add \n"
"og deretter starte om tjeneren. \n"
"Du vil ogs� trenge brukernavnet og passordet til en domeneadministrator\n"
"for � legge maskinen til i et windows domene.\n"
"Dersom nettverket enn� ikke er satt opp, vil DrakX fors�ke � legge maskinen\n"
"til i domenet etter at nettverket er satt opp.\n"
"Dersom dette skulle feile, og domeneautentisering ikke virker, kj�r "
"'smbpasswd -j DOMENE -U BRUKER%%PASSORD' med ditt Windows(TM)\n"
"domene, ag administrators brukernavn og passord etter at systemet har "
"startet.\n"
"Kommandoen 'wbinfo -t' sjekker om autentiseringspassordene er "
"tilstrekkelige. "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Server"
msgstr "NIS-tjener"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Domain"
msgstr "NIS-domene"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "Autentisering NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Server"
msgstr "LDAP-tjener"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP grunnleggende dn"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "Autentisering LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Local files"
msgstr "Lokale filer"

#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "Autentifikasjon"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Dette passordet er for enkelt (m� v�re minst %d tegn langt)"

#. -PO: keep this short or else the buttons will not fit in the window
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "Intet passord"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password"
msgstr "Sett root-passord"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
"Du har ikke konfigurert det grafiske grensesnittet X. Er du sikker p� at du "
"vil gj�re dette?"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Tjenester: %d aktivert for %d registrert"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services"
msgstr "Tjenester"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "System"

#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "%s on %s"
msgstr "%s p� %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
msgstr "Oppstartslaster"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Boot"
msgstr "Oppstart"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "disabled"
msgstr "deaktiver"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "activated"
msgstr "aktivert"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Firewall"
msgstr "Brannmur"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "Sikkerhet"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Security Level"
msgstr "Sikkerhetsniv�"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "Nettverk"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Network & Internet"
msgstr "Nettverk & internett"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Graphical interface"
msgstr "Grafisk grensesnitt"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware"
msgstr "Maskinvare"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "TV-kort"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "Lydkort ikke oppdaget. Pr�v \"harddrake\" etter installasjonen"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Kj�r \"sndconfig\" etter installasjonen for � konfigurere lydkortet ditt"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Har du et ISA lydkort?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "Lydkort"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "Fjern-CUPS tjener"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "Ingen skriver"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "Skriver"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "Mus"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "Tidssone"

#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "Tastatur"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "Oppsummering"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "NTP-tjener"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Maskinvareklokken din satt til GMT"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
msgstr "Hva er din tidsone?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Would you like to try again?"
msgstr "�nsker du � pr�ve p� nytt?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Kan ikke kontakte mirror %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Kontakter speilet for � f� en liste over tilgjengelige pakker"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Velg et speil som pakkene kan hentes fra"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
"Kontakter Mandrake Linux web-sted for � f� en liste over tilgjengelige speil"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Du har n� muligheten til � laste ned oppdaterte pakker. Dette er pakker som\n"
"har blitt sluppet etter at distribusjonen ble sluppet. Dette kan v�re enten\n"
"sikkerhetsoppdatering eller bugfikser.\n"
"\n"
"For � laste ned disse pakkene, s� m� du ha en fungerende "
"internettoppkobling.\n"
"\n"
"�nsker du � installere oppdateringene ?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Sett inn oppdater moduler disketten i stasjon %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Sett inn en oppstartsdiskett i stasjon %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "Konfigurasjon postinstallering"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Installerer pakke %s\n"
"%d%%"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing installation"
msgstr "Forbereder installasjon"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "CD-ROMen ved navnet \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Hvis du har alle CDene i listen nedenfor, klikk Ok.\n"
"Hvis du ikke har noen av disse CDene, klikk Avbryt.\n"
"Hvis bare noen av CDene mangler, fjern disse, klikk s� Ok."

#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "Alle"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Virkelig minimal installasjon (uten urpmi)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Med grunnleggende dokumentasjon (anbefalt!)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "Med X"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Du har ikke valgt noen pakkegrupper.\n"
"Vennligst velg den minimale installasjonen du �nsker:"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "Type av installasjon"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Valgt st�rrelse er st�rre enn tilgjengelig plass"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Sett inn en diskett med pakkevalget"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "Henter fra disketten"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "Pakkevalg"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "Lagre p� diskett"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "Hent fra diskett"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Vennligst velg lagre eller hente pakkevalg p� diskett.\n"
"Formatet er det samme som for auto_install genererte disketter."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d "
"> %d)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "S�ker etter tilgjengelige pakker"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Finner pakker som skal oppgraderes"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "Ser p� pakker som allerede er installert..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "S�ker etter tilgjengelige pakker og bygger om igjen rpm-databasen..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Det er ikke nok SWAP til � fullf�re installasjonen, vennligst legg til litt "
"mer"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr ""
"Klarte ikke � sjekke filsystemet %s. Vil du fors�ke � reparere feilene? "
"(Advarsel! Du kan miste data!)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "Sjekke fo rd�rlige clustere?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Velg partisjonene du �nsker � formatere"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for "
"�boote systemet ditt, m� du lage en bootstrap partisjon i DiskDrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "Velg monteringspunktene"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Skanner partisjoner for � finne monteringspunkter"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No partition available"
msgstr "ingen tilgjengelige partisjoner"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "Konfigurerer IDE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Konfigurerer PCMCIA kort..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulering 3 knapper"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulering 2 knapper"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "Emulering knapper"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Vennligst velg hvilken serieport musen din koblet til."

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "Port mus"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "Vennligst velg din musetype."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Encryption key for %s"
msgstr "Krypteringsn�kkel for %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Upgrade %s"
msgstr "Oppgrader %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Er dette en installering eller en oppgradering?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Install/Upgrade"
msgstr "Installer/Oppgrader"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Her er den komplette lista over tilgjengelige tastatur"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Vennligst velg tastatur-oppsettet ditt."

#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "Avslutt"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "License agreement"
msgstr "License agreement"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
msgstr "En feil oppsto"

#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> mellom elementer  | <Space> velger | <F12> neste skjerm "

#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux installasjon %s"

#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "Ingen diskettstasjon tilgjengelig"

#: ../../install_steps.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "Velkommen til %s"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Noen viktige pakker ble ikke installert ordentlig.\n"
"Det er noe galt enten med CD-rom'en eller CD-platen.\n"
"Sjekk cd-platen p� en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"

#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "Dupliser monteringspunkt %s"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"En feil oppsto, men jeg vet ikke hvordan jeg skal h�ndtere dette p� en\n"
"pen m�te.\n"
"Fortsett p� eget ansvar."

#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "Vennligst vent"

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
msgid "Ok"
msgstr "Ok"

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "Fullf�r"

#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "Basic"
msgstr "Grunnleggende"

#: ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "Avansert"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
msgstr "Fjern"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "Modifiser"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "Legg til"

#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "Velg en fil"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Her kan du velge tast, eller tastekombinasjon, som vil tillate deg\n"
"� bytte mellom forskjellige tastaturoppsett.\n"
"(for eksempel latin og ikke-latin)"

#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "H�yre \"Windows\" tast"

#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "Venstre \"Windows\" tast"

#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "\" Menu\" tast"

#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt og Shift taster samtidig"

#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl og Alt taster samtidig"

#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "CapsLock tast"

#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control og Shift taster samtidig"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Begge Shift taster samtidig"

#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "H�yre Alt tast"

#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Jugoslavisk (latin)"

#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "US-tastatur (internasjonal)"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "US-tastatur"

#: ../../keyboard.pm:1
#, c-format
msgid "UK keyboard"
msgstr "UK-tastatur"

#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "Ukrainsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Tyrkisk (moderne \"Q\" modell)"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Tyrkisk (tradisjonell \"F\" modell)"

#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "Tajik-tastatur"

#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr "Thai-tastatur"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamilsk (skrivemaskin-layout)"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamilsk (ISCII-layout)"

#: ../../keyboard.pm:1
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Serbisk (cyrillic)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slovakisk (QWERTY)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slovakisk (QWERTZ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "Slovensk"

#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "Svensk"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Yawerty)"
msgstr "Russisk (Yawerty)"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "Russisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "Romansk (qwerty)"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "Romansk (qwertz)"

#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "Kanadisk (Quebec)"

#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "Portugisisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Polsk (qwertz oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Polsk (qwerty oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "Norsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "Hollansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr "Maltesisk (US)"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr "Maltesisk (UK)"

#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongolsk (cyrillic)"

#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Myanmar (Burmesisk)"

#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "Makedonsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr "Malaysisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "Lotvisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litauisk \"phon�tic\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litauisk \"nummer-rekke\" QWERTY"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Liauisk AZERTY (ny)"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Liauisk AZERTY (gammel)"

#: ../../keyboard.pm:1
#, c-format
msgid "Laotian"
msgstr "Laot"

#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "Latinamerikansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "Koreansk tastatur"

#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "Japansk 106 taster"

#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr "Inuktitut"

#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "Italiensk"

#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "Islansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Iranian"
msgstr "Iransk"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Israelsk (Phonetic)"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "Israelsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "Kroatisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "Ungarsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr "Gurmukhi"

#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr "Gujarati"

#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "Gresk"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgisk (\"Latinsk\" oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgisk (\"Russisk\" oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "Fransk"

#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "Finsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "Spansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "Estlandsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Svensk)"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norsk)"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "Dansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr "Devanagari"

#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
msgstr "Tysk (ingen d�de taster)"

#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "Tysk"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "Tsjekkisk (QWERTY)"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Tsjekkisk (QWERTZ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "Sveisisk (fransk oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "Sveisisk (tysk oppsett)"

#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "Belarusian"

#: ../../keyboard.pm:1
#, c-format
msgid "Bosnian"
msgstr "Bosnisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brasiliansk (ABNT-2)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Bulgarsk (BDS)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Bulgarsk (phonetic)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
msgstr "Bengalsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "Belgisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjansk (latin)"

#: ../../keyboard.pm:1
#, c-format
msgid "Arabic"
msgstr "Arabisk"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (phonetic)"
msgstr "Armensk (phon�tic)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "Armensk (skrivemaskin)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "Armensk (gammel)"

#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "Albansk"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "Polsk"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabwe"

#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr "Zambia"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr "South Africa"

#: ../../lang.pm:1
#, c-format
msgid "Serbia"
msgstr "Serbia"

#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr "Yemen"

#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis and Futuna"

#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr "Vietnam"

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Virgin Islands (U.S.)"

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr "Virgin Islands (British)"

#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Saint Vincent and the Grenadines"

#: ../../lang.pm:1
#, c-format
msgid "Vatican"
msgstr "Vatikanstatene"

#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr "Uruguay"

#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "United States Minor Outlying Islands"

#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr "Ukraina"

#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr "Tanzania"

#: ../../lang.pm:1
#, c-format
msgid "Taiwan"
msgstr "Taiwan"

#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad and Tobago"

#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Tyrkia"

#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr "Tunisia"

#: ../../lang.pm:1
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "�st Timor"

#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tajikistan"

#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr "Thailand"

#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr "Togo"

#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "French Southern Territories"

#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "Chad"

#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks and Caicos Islands"

#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr "Swaziland"

#: ../../lang.pm:1
#, c-format
msgid "Syria"
msgstr "Syria"

#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome and Principe"

#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr "Suriname"

#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr "Somalia"

#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr "Slovakia"

#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbard og Jan Mayen"

#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr "Slovenia"

#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr "Saint Helena"

#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr "Singapore"

#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr "Solomon Islands"

#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "Saudi Arabia"

#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr "Rwanda"

#: ../../lang.pm:1
#, c-format
msgid "Russia"
msgstr "Russland"

#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr "Romania"

#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr "Palau"

#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr "Paraguay"

#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr "Portugal"

#: ../../lang.pm:1
#, c-format
msgid "Palestine"
msgstr "Palestinsk"

#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr "Puerto Rico"

#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre and Miquelon"

#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr "Polen"

#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr "Philippines"

#: ../../lang.pm:1
#, c-format
msgid "Papua New Guinea"
msgstr "Papua New Guinea"

#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "French Polynesia"

#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr "Peru"

#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr "Panama"

#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr "Oman"

#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr "New Zealand"

#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr "Niue"

#: ../../lang.pm:1
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr "Nicaragua"

#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr "Nigeria"

#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr "Norfolk Island"

#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr "Niger"

#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr "New Caledonia"

#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr "Namibia"

#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr "Mozambique"

#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr "Malaysia"

#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr "Mexico"

#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr "Malawi"

#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr "Maldivene"

#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr "Mauritius"

#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr "Malta"

#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr "Mauritania"

#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr "Martinique"

#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr "Northern Mariana Islands"

#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr "Mongolia"

#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr "Mali"

#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr "Makedonia"

#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr "Marshall Islands"

#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr "Moldova"

#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr "Monaco"

#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr "Morocco"

#: ../../lang.pm:1
#, c-format
msgid "Libya"
msgstr "Liberia"

#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "Latvia"

#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr "Luxembourg"

#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr "Litauen"

#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "Lesotho"

#: ../../lang.pm:1
#, c-format
msgid "Liberia"
msgstr "Liberia"

#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr "Saint Lucia"

#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "Lebanon"

#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr "Laos"

#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "Kazakhstan"

#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "Cayman Islands"

#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "Kuwait"

#: ../../lang.pm:1
#, c-format
msgid "Korea"
msgstr "Korea"

#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr "Nordkorea"

#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts and Nevis"

#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "Comoros"

#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "Cambodia"

#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "Kyrgyzstan"

#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "Kenya"

#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "Japan"

#: ../../lang.pm:1
#, c-format
msgid "Jordan"
msgstr "Jordan"

#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "Jamaica"

#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "Island"

#: ../../lang.pm:1
#, c-format
msgid "Iran"
msgstr "Iran"

#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "Irak"

#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "British Indian Ocean Territory"

#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "India"

#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "Israel"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "Irland"

#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "Indonesia"

#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "Hungarn"

#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: ../../lang.pm:1
#, c-format
msgid "Croatia"
msgstr "Kroatia"

#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: ../../lang.pm:1
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Heard and McDonald �yene"

#: ../../lang.pm:1
#, c-format
msgid "Hong Kong"
msgstr "Hong Kong"

#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "Guyana"

#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinea-Bissau"

#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "Guam"

#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "S�r Georgia og S�r Sandwich �yene"

#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "Equatorial Guinea"

#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "Guadeloupe"

#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "Guinea"

#: ../../lang.pm:1
#, c-format
msgid "Gambia"
msgstr "Gambia"

#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "Gr�nland"

#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "Gibraltar"

#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "Ghana"

#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "French Guiana"

#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "Georgia"

#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "United Kingdom"

#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "Faroe Islands"

#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr "Mikronesia"

#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Falkland Islands (Malvinas)"

#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "Fiji"

#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "Finland"

#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "Ethiopia"

#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr "Spania"

#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "Eritrea"

#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr "Western Sahara"

#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egypt"

#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "Estland"

#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "Ecuador"

#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "Algerie"

#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "Dominikanske republikk"

#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "Dominikanske republikk"

#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "Danmark"

#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "Djibouti"

#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "Kypros"

#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "Christmas Island"

#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "Cape Verde"

#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "Kuba"

#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "Colombia"

#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "Kina"

#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "Kamerun"

#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "Chile"

#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "Cook Islands"

#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "Cote d'Ivoire"

#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr "Sveits"

#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongo (Brazzaville)"

#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "Central African Republic"

#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Kongo (Kinshasa)"

#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Cocos (Keeling) Islands"

#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "Kanada"

#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "Belize"

#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "Hviterussland"

#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "Bouvet�ya"

#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "Bhutan"

#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "Bahamas"

#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "Brasil"

#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "Bolivia"

#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "Benin"

#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnia og Herzegovina"

#: ../../lang.pm:1
#, c-format
msgid "Azerbaijan"
msgstr "Azerbaijan"

#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "Australia"

#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "Amerikansk Samoa"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "Antarktis"

#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "Angola"

#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr "Netherlands Antilles"

#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "Armenia"

#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "Albania"

#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua and Barbuda"

#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr "United Arab Emirates"

#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "Afghanistan"

#: ../../lang.pm:1
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "Rund monterer %s\n"

#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Fjern de logiske partisjoner f�rst\n"

#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
"PCMCIA st�tte eksisterer ikke lengre for 2.2 kjerner. Vennligst bruk en 2.4 "
"kernel."

#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "BEVEG HJULET DITT!"

#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "For � aktivere musen,"

#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "Vennligst test musen."

#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "Ingen mus"

#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "ingen"

#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "3 knapper"

#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "2 knapper"

#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "1 knapp"

#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "bussmus"

#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (seriell, gammel C7 type)"

#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "MM-seriene"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC-seriene (seriell)"

#: ../../mouse.pm:1
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Generisk 3-knappers mus"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Generisk 2-knappers mus"

#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "seriell"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Utforsker"

#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "Hjul"

#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "Generisk"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Generisk PS2 hjulmus"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "Standard"

#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - mus"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Skift mellom flat og gruppesortert"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "Trekk sammen tre"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "Utvid tre"

#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "Info"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "Er dette riktig?"

#: ../../my_gtk.pm:1
#, c-format
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"

#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr "Feil ved skriving til fil %s"

#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../partition_table.pm:1
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Gjenoppretting fra fil %s mislykket: %s"

#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n"
"Den eneste l�sningen er � flytte prim�rpartisjonene dine for � ha hullet ved "
"siden av de utvidede partisjonene"

#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Utvidet partisjon ikke st�ttet p� denne plattformen"

#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "montering mislykket: "

#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "kanskje"

#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "bra"

#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "veldig bra"

#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "viktig"

#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "m� ha"

#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ikke nok partisjoner for RAID niv� %d\n"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid mislykket"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid mislykket (kanskje raidtool mangler?)"

#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d"

#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "Stopp"

#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "Start"

#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "Ved oppstart"

#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Ingen tilleggsinformasjon\n"
"om denne tjenesten, begklager."

#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "Tjenester og daemoner"

#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "stoppet"

#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "kj�rer"

#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart"

#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "Databasetjener"

#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "Fjernadministrasjon"

#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr "Fildeling"

#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "Internett"

#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "Skriver ut"

#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
"Starter X-font tjeneren (dette er obligatorisk for at XFree skal kj�re)."

#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Last driverene for dine usb enheter."

#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog er en fasilitet som mange daemoner bruker til � logge beskjeder\n"
"til forskjellige systemloggfiler. Det er en god ide � alltid kj�re syslog."

#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Start lydsystemet p� maskinen din"

#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n"
"som er logget p� en maskin som kj�rer rwho-daemonen (lik finger)."

#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokollen lar brukere p� et nettverk identifisere hvem som\n"
"er logget inn p� andre maskiner."

#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokollen lar brukere p� et nettverk finne ytelses-\n"
"metrikser for alle maskinene p� nettverket."

#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n"
"RIP-protokollen. Mens RIP er mye brukt p� sm� nettverk, trengs mere "
"komplekse\n"
"rutingprotokoller for komplekse nettverk."

#: ../../services.pm:1
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Tilordne r� enheter til blokkenheter (som harddisk-partisjoner),\n"
"for bruk av applikasjoner som Oracle eller DVD-spillere"

#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Lagrer og gjenoppretter system entropy pool for h�yere kvalitet p�\n"
"tilfeldig nummergenerering."

#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix er en posttransporteringsagent, som er et program som flytter post "
"fra en maskin til en annen."

#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper h�ndterer RPC-tilknytninger, som brukes av protokoller\n"
"som NFS og NIS. Portmap-tjeneren m� kj�res p� maskiner som brukes som\n"
"tjenere for protokoller som bruker RPC-mekanismen."

#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA st�tte er vanligvis st�tte for ting som ethernet og\n"
"modem i b�rbare PC'er. Den vil ikke starte uten konfigurasjon s� det er "
"trygt\n"
"� ha denne installert p� maskiner som ikke trenger det."

#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "St�tter OKI 4w og kompatible winskrivere."

#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Sl�r automatisk p� numlock-tast i konsoll og XFree ved\n"
"oppstart."

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
"Denne tjenesten tilbyr NFS fill�sing funksjonalitet."

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
"Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n"
"/etc/exports filen."

#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til � starte\n"
"ved oppstart."

#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Monterer og demonterer alle Network File System (NFS), SMB (Lan\n"
"Manager/Windows), og NCP (NetWare) monteringspunkter."

#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) er en Domain Name Server (DNS) som brukes til � bestemme "
"vertsnavn til IP-adresser."

#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server, brukt for � bygge en tjener med h�y ytelse og\n"
"tilgjengelighet."

#: ../../services.pm:1
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd er skriverdaemonen som beh�ves for at lpr skal virke ordentlig. Den er\n"
"i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)."

#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf vil noen ganger arrangere utf�relse av forskjellige\n"
"oppgaver ved oppstart for � vedlikeholde systemkonfigurasjon."

#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart."

#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatisk regenerering av kjernehode i /boot for\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Denne pakken laster det valgte tastaturkartet som er satt i\n"
"/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig "
"verkt�yet.\n"
"For de fleste maskiner b�r dette v�re aktivert."

#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Start pakkefiltrering for Linux kjerne 2.2 serien for � sette\n"
"opp en brannmur for � beskytte maskinen din fra nettverksangrep."

#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n"
"varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for � "
"starte\n"
"mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd "
"stopper\n"
"alle tjenestene den er ansvarlig for."

#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache er en World Wide Web tjener. Den blir brukt til � tjene HTML-filer\n"
"og CGI."

#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake kj�rer et maskinvares�k, og kan konfigurere ny/endret\n"
"maskinvare."

#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM gir musest�tte til tekstbaserte Linux applikasjoner som\n"
"Midnight Commander. Den lar ogs� musebaserte konsoller foreta klipp-og-lim "
"operasjoner,\n"
"og inkluderer st�tte for pop-up menyer i konsollen."

#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron er et standard UNIX-program som kj�rer brukerspesifiserte programmer\n"
"ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig "
"UNIX cron,\n"
"inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner."

#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Kj�rer kommandoer planlagt av at kommandoen ved tidspunkt spesifisert n�r\n"
"at ble kj�rt, og kj�rer batch kommandoer n�r lastingsmengden er lav nok."

#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd blir brukt til overv�kning av batteristatus og logging av dette via "
"syslog.\n"
"Kan ogs� brukes til � sl� av maskinen n�r batteriet er d�rlig."

#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron en periodisk kommandoplanlegger."

#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem"

#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "Installerer pakke..."

#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Bruk: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [alt]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake oppl�sning"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[OPSJON]...\n"
"  --no-confirmation      ikke sp�r det f�rste bekreftelsessp�rsm�let i "
"MandrakeUpdate modus\n"
"  --no-verify-rpm        ikke verifiser pakkesignaturer\n"
"  --changelog-first      vis endringslogg f�r filliste i "
"beskrivelsesvinduet   --merge-all-rpmnew     foresl� � sl� sammen alle ."
"rpmnew/.rpmsave filer"

#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[OPSJONER]\n"
"Nettverks og internett forbindelse og overv�kningsapplikasjon\n"
"\n"
"--defaultintf interface : vis dette grensesnittet som standard\n"
"--connect : Koble til internett dersom ikke allerede tilkoblet\n"
"--disconnect : koble fra internett dersom tilkoblet\n"
"--force : tving til/frakobling. Brukes med --(dis)connect.\n"
"--status : returnerer 1 dersom tilkoblet, 0 hvis ikke.\n"
"--quiet : ikke v�r interaktiv. Brukes med --(dis)connect."

#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"

#: ../../standalone.pm:1
#, c-format
msgid "[keyboard]"
msgstr "[tastatur]"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[OPSJONER]...\n"
"Mandrake Terminaltjener konfigurasjon\n"
"--enable         : aktiver MTS\n"
"--disable        : deaktiver MTS\n"
"--start          : start MTS\n"
"--stop           : stopp MTS\n"
"--adduser        : legg til en eksisterende systembruker til MTS (krever "
"brukernavn)\n"
"--deluser        : fjern en systembruker fra MTS (krever brukernavn)\n"
"--addclient      : legg til en klientmaskin til MTS (krever MAC addresse, "
"IP, nbi bildenavn)\n"
"--delclient      : slett en klientmaskin fra MTS (krever MAC addresse, IP, "
"nbi bildenavn)"

#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"Skrifttype import og "
"overv�kningsapplikasjon                                     \n"
"--windows_import : importer fra alle tilgjengelige windowspartisjoner.\n"
"--xls_fonts      : vis alle typer som allerede eksisterer fra xls\n"
"--strong         : sterk verifikasjon af skrifttyper.\n"
"--install        : installer alle typer og kataloger.\n"
"--uninstall      : avinstaller alle typer og kataloger.\n"
"--replace        : erstatt typer som eksisterer fra f�r\n"
"--application    : 0 ingen applikasjon.\n"
"                 : 1 alle tilgjengelige st�ttede applikasjoner.\n"
"                 : applikasjonsnavn, som \"so\" for staroffice \n"
"                 : og gs for ghostscript."

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""
"[OPSJONER] [PROGRAMNAVN]\n"
"\n"
"OPTIONS:\n"
"  --help            - skriv denne hjelp-meldingen.\n"
"  --report          - program skal v�re et av Mandrakeverkt�yene\n"
"  --incident        - program skal v�re et av Mandrakeverkt�yene"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup og gjenopprettingsapplikasjon\n"
"\n"
"--default             : lagre standardkataloger.\n"
"--debug               : vis alle avlusningsmeldinger.\n"
"--show-conf           : liste over filer eller kataloger til � ta backup "
"av.\n"
"--config-info         : forklar konfigurasjonsfilvalg (for ikke-X brukere)\n"
"--daemon              : bruk tjenestekonfigurasjon. \n"
"--help                : vis denne meldingen.\n"
"--version             : vis versjonsnummer.\n"

#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Dette programmet er �pen programvare; du kan redistribuere det og/eller\n"
"modifisere det if�lge betingelsene til \"GNU General Public License\" som\n"
"definert av Free Software Foundation, enten versjon 2, eller etter ditt "
"�nske\n"
"en hvilken som helst senere versjon.\n"
"\n"
"Dette programmet er distribuert med h�p om at det vil v�re nyttig,\n"
"men uten noen som helst form for garanti. Se \"GNU General Public License\"\n"
"for mer informasjon.\n"
"\n"
"Du skal ha mottatt en kopi av \"GNU General Public License\" sammen med\n"
"dette programmet. Hvis ikke, kontakt:\n"
"\n"
"Free Software Foundation Inc\n"
"59 Temple Place - Suite 330\n"
"Boston\n"
"MA 02111-1307\n"
"USA\n"

#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "Avslutt installering"

#: ../../steps.pm:1
#, c-format
msgid "Install updates"
msgstr "Installer oppdateringer"

#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "Konfigurer tjenester"

#: ../../steps.pm:1
#, c-format
msgid "Configure X"
msgstr "Konfigurer X"

#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "Installer oppstartslaster"

#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "Konfigurer nettverk"

#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "Legg til en bruker"

#: ../../steps.pm:1
#, c-format
msgid "Root password"
msgstr "Root passord"

#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "Installer system"

#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "Velg pakker for installering"

#: ../../steps.pm:1
#, c-format
msgid "Format partitions"
msgstr "Formater partisjoner"

#: ../../steps.pm:1
#, c-format
msgid "Partitioning"
msgstr "Partisjonering"

#: ../../steps.pm:1
#, c-format
msgid "Choose your keyboard"
msgstr "Velg tastatur"

#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "Velg installasjonsklasse"

#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "Oppdaging av harddisk"

#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "Konfigurer mus"

#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr "Lisens"

#: ../../steps.pm:1
#, c-format
msgid "Language"
msgstr "Velg spr�k"

#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr "utopia 25"

#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "OK"
msgstr "OK"

#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
msgid "logdrake"
msgstr "logdrake"

#: ../../ugtk.pm:1
#, c-format
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installasjons skjermdriver)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s,\n"
"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s."

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s med maskinvare 3D akselerasjon"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
"%s,\n"
"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN.\n"
"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
"%s.\n"
"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Konfigurer bare kort \"%s\"%s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "Bruk Xinerama utvidelse"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "Konfigurere all hoder uavhengig"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Hvilken konfigurasjon av XFree vil du ha?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "XFree konfigurasjon"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Velg minnest�rrelsen til grafikk-kortet ditt"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Systemet ditt st�tter konfigurasjon for flere hoder.\n"
"Hva �nsker du � gj�re?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-hode konfigurasjon"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Choose an X server"
msgstr "Velg en X-tjener"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "X-tjener"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB eller mer"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Behold endringene?\n"
"N�v�rende konfigurasjon er:\n"
"\n"
"%s"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Options"
msgstr "Valg"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "Test"

#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "Oppl�sning"

#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "Skjerm"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "Grafikk-kort"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertikal oppfrisknings-rate"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horisontal oppfrisknings-rate"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"De to kritiske parametrene er den vertikale oppfrisknings-raten, som er "
"raten\n"
"som som oppfrisker hele skjermen, og mest viktig den horisontale \n"
"sync-raten, som er raten som scanlinjer blir vist p�.\n"
"\n"
"Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- "
"omr�de\n"
"som er utenfor det monitoren din er i stand til � klare: Du kan skade "
"skjermen din.\n"
"Hvis du er usikker, velg en konservativ innstilling."

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play s�king mislykket. Vennligst velg en monitor"

#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "Selger"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "Velg en monitor"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "Grafikk-kort: %s"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Velg oppl�sning og fargedybde"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "Oppl�sninger"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 milliarder farger (32 bits)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 millioner farger (24 bits)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 tusen farger (16 bits)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 tusen farger (15 bits)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 farger (8 bits)"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Is this the correct setting?"
msgstr "Er dette riktig oppsett?"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Leaving in %d seconds"
msgstr "Forlater om %d sekunder"

#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"En feil har oppst�tt:\n"
"%s\n"
"Pr�v � endre p� parameterene. "

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Vil du teste konfigurasjonen?"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "Test konfigurasjon"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "Hva slags norm bruker TV'en din?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Det ser ut til at grafikk-kortet ditt har en TV-UT kontakt.\n"
"Det kan settes opp til � fungere ved hjelp av frame-buffer.\n"
"\n"
"For at dette skal virke m� kortet v�re plugget til TV'en din f�r oppstart av "
"maskinen din.\n"
"Velg s� \"TVout\" inngangen i oppstartslasteren\n"
"\n"
"Har du dette?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Jeg kan sette opp maskinen din til � automatisk starte X ved oppstart.\n"
"Vil du at X skal starte n�r du starter maskinen p� nytt?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "X ved oppstart"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 driver: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86-tjener: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "Oppl�sning: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "Fargedybde: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Minne grafikk: %s kB\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafikk-kort: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Skjerm VertRefresh: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Skjerm HorizSync: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "Skjerm: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "Enhet mus: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "Type mus: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-oppsett: %s\n"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "Valg: %s"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "Monteringspunkt: "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "Tjener: "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL'en m� begynne med http:// eller https://"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Vennligst tast inn WebDAV tjener URL'en."

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "Monteringspunkt"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "Tjener"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "Monter"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Unmount"
msgstr "Demonter"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "Ny"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV er en protokoll som lar deg montere en vevtjeners kataloger lokalt,\n"
"og behandle de som et lokalt filsystem (forutsatt at vevtjeneren er satt opp "
"som\n"
"WebDAV tjener). Hvis du vil legge til WebDAV monteringspunkter, velg \"Ny\""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "Bruk ``%s'' istedet"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "Type"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Bruk ``Demonter'' f�rst"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Delete"
msgstr "Slett"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "Opprett"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "Filsystemtyper:"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "Tom"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Windows"
msgstr "Windows"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "Veksel"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "Journal filsystem"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "Ingen harddisker funnet"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "Vennligst klikk p� en partisjon"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Du har en stor FAT partisjon\n"
"(vanligvis brukt av Microsoft Dos/Windows).\n"
"Jeg forsl�r at du f�rst endrer st�rrelsen p� denne partisjonen\n"
"(klikk p� den, klikk s� p� \"Endre st�rrelse\")"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "Velg handling"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "Wizard"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Hvis du skal bruke aboot, v�re n�ye med � la det v�re ledig plass (2048 "
"sektorer er nok)\n"
"ved begynnelsen av disken"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "Vennligst ta sikkerhetskopi av din data f�rst"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "Les n�ye!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "Krypteringsn�kkel (igjen)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "Krypteringsn�kkel"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "Krypteringsn�kkelene stemmer ikke overens"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "Denne krypteringsn�kkelen er for enkel (m� v�re minst %d tegn lang)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Velg din filsystemkrypteringsn�kkel"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "Filsystemkrypteringsn�kkel"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "Type: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "p� kanal %d id %d\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "Type partisjonstabell: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disker %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "St�rrelse: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "Skrivebeskyttet"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Device: "
msgstr "Enhet: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Denne spesielle Bootstrap-\n"
"partisjonen er for �\n"
"dual-boote ditt system.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Det er store sjanser for at\n"
"denne partisjonen er en\n"
"driverpartisjon, du b�r nok\n"
"la den v�re i fred.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback filnavn: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-disker %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "Skivest�rrelse %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "Niv� %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partisjon startet opp som standard\n"
"    (for MS-DOS oppstart, ikke for lilo)\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback-fil(er): \n"
"   %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "Montert\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "Ikke formatert\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "Formatert\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Sylinder %d til %d\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorer"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "St�rrelse: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "Start: sektor %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "Navn: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS diskbokstav: %s (bare en gjetning)\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "partisjon %s er n� kjent som %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "Fjerner %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "Kopierer %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "Flytt filer til en ny partisjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Katalogen %s inneholder allerede noe data\n"
"(%s)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "Gjem filer"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "Flytt filer til en ny partisjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Etter formatering av partisjon %s vil alle data p� denne partisjonen\n"
"g� tapt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partisjonstabellen p� disk %s blir n� skrevet til disk!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Pakken %s trengs. Installere den?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "Hva slags type partisjonering?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "V�r forsiktig: denne operasjonen er farlig."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "skivest�rrelse"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "niv�"

#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "device"
msgstr "enhet"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "Diverse"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "Monteringsvalg:"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "Filen eksisterer allerede. Bruke denne?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Filen blir allerede brukt av en annen loopback, velg en annen"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "Gi ett filnavn"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "Filsystemtype: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "St�rrelse i MB: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "Loopback filnavn: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Denne partisjonen kan ikke brukes for loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "LVM navn?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "ny"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Velg en eksisterende LVM for � legge til"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Velg en eksisterende RAID for � legge til"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "Flytter partisjon..."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "Flytter"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Hvilken sektor vil du flytte til?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Hvilken disk vil du flytte til?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "Flytt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "Ny st�rrelse i MB: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "Velg den nye st�rrelsen"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "Endre st�rrelse"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Etter endring av st�rrelse for partisjon %s, vil alle data p� denne\n"
"partisjonen vil g� tapt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Alle data p� denne partisjonen burde sikkerhetskopieres"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "Denne partisjonen kan ikke st�rrelsen forandres p�"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Beregner fat filsystemgrense"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Hvor vil du montere %s?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n"
"loopback. Fjern loopback f�rst"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Hvor vil du montere %s enheten?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Hvor vil du montere loopback-filen %s?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Bytter fra ext2 til ext3"

#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "Hvilket filsystem �nsker du?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "Endre partisjonstype"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Etter endring av type p� partisjon %s, vil alle data p� denne partisjonen g� "
"tapt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "Fjern loopbackfilen?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Du kan ikke lage en ny partisjon,\n"
"ettersom du har n�dd det maksimale antallet prim�re partisjoner.\n"
"Du m� f�rst fjerne en prim�r partisjon og lage en utvidet partisjon."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "Valg: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "Start sektor: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "Opprette en ny partisjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "Bruk for loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Modify RAID"
msgstr "Modifiser RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "Fjern fra LVM"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "Fjern fra RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "Legg til LVM"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "Legg til RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "Formater"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "Detaljert informasjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "Pr�ver � redde partisjonstabell"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Sett inn en diskett i stasjonen\n"
"Alle data p� denne disketten vil g� tapt"

#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../network/modem.pm:1
#, c-format
msgid "Warning"
msgstr "Advarsel"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "Velg fil"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Kopien av partisjonstabellen har ikke samme st�rrelse\n"
"Fortsette for det?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "Fjernbart media automontering"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "Last partisjonstabell p� nytt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "N�dpartisjonstabell"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "Redde partisjonstabell"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "Lagre partisjonstabeller"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"For � ha flere partisjoner vennligst slett en for � kunne opprette en "
"utvidet partisjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "Jeg kan ikke legge til flere partisjoner"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "Alle prim�re partisjoner er i bruk"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "Harddisk informasjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "Automatisk allokering"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "Fjern alle"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "�nsker du � lagre modifiseringen av /etc/fstab"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Avslutt uten � skrive partisjonstabellen?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "Avslutt uten � lagre"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "Fortsette likevel?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "Skift til ekspertmodus"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "Skift til normalmodus"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "Angre"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "Avslutt"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "Velg en partisjon"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "Velg en annen partisjon"

#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "Endre type"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "S�k tjenere"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "Domene"

#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "Brukernavn"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Vennligst tast inn brukernavnet ditt, passordet og domenenavnet for � f� "
"tilgang til denne verten."

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "Domene autentifisering n�dvendig"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "Enda ett"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "Hvilket brukernavn"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Kan ikke logge inn med brukernavn %s (feil passord?)"

#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr "cpu nr. "

#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr "SMBus-kontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr "USB-kontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr "SCSI-kontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr "Firewire-kontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA-kontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr "Styrespake"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Scanner"
msgstr "Scanner"

#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Unknown/Others"
msgstr "Ukjent/Andre"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr "Broer og systemkontrollere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Modem"
msgstr "Modem"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Ethernetcard"
msgstr "Ethernettkort"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Processors"
msgstr "Prosessorer"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr "Vevkamera"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Soundcard"
msgstr "Lydkort"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Other MultiMedia devices"
msgstr "Andre multimediaenheter"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Tvcard"
msgstr "TV-kort"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Videocard"
msgstr "Skjermkort"

#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Tape"
msgstr "Tape"

#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD-brennere"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Disk"
msgstr "Disk"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr "Zip"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Floppy"
msgstr "Diskett"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr "La meg velge driver"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "Driver:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Hvis du tror du vet hvilken driver som passer til ditt kort kan du velge en\n"
"i lista over.\n"
"\n"
"Den n�v�rende driveren for ditt \"%s\" lydkort er \"%s\"."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitratry driver"
msgstr "Valg av en annen driver"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Den klassiske metoden for � avluse lydoppsettet er � kj�re f�lgende\n"
"kommandoer:\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydortet bruker \n"
"som standard\n"
"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
"bruk\n"
"\n"
"- \"/sbin/lsmod\" lar deg se om denne driveren er lastet\n"
"\n"
"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
"vise om disse tjenestene er satt opp til � startes.\n"
"\n"
"- \"aumix -q\" vil vise om lydvolumet er skrudd ned eller ikke\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruker "
"lydkortet\n"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr "Feils�king av lyd"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Feil: \"%s\" driveren for lydkortet ditt er ikke i listen"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unkown driver"
msgstr "Ukjent driver"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Det er ingen kjent driver for lydkortet ditt (%s)"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "Ingen kjent driver"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Det er ingen gratis drivere for lydkortet ditt (%s), men det er en "
"propritet�r driver p� \"%s\"."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No open source driver"
msgstr "Ingen kjent open source driver"

#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Vennligst vent . . . Setter konfigurasjonen p� plass"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Den gamle \"%s\" driveren er svartelistet.\n"
"\n"
"Den har blitt rapportert at den oopser kjernen n�r den sl�es av.\n"
"\n"
"Den nye \"%s\" driveren vil bare bli brukt p� neste bootstrap."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr "Feils�king"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) var det f�rste lyd-APIet. OSS er et\n"
"operativsystemuavhengig lyd-API (det er tilgjengelig p� de fleste unix-"
"systemer),\n"
"men det er et veldig enkelt og begrenset API. \n"
"\n"
"ALSA (Advanced Linux Sound Architecture) er en modularisert lydarkitektur\n"
"som st�tter en stor mengde med ISA, USB og PCI baserte lydkort.\n"
"ALSA tilbyr ogs� et mye bredere API enn OSS.\n"
"\n"
"For � bruke ALSA kan du enten bruke ALSAs OSS�-kompatibilitetsmodul,\n"
"eller det nye ALSA-APIet som tilbyr mange forbedringer men som krever at\n"
"ALSA-bibliotekene er installert.\n"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Kortet ditt bruker n� %s\"%s\" driveren (standard driver for kortet ditt er "
"\"%s\")"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Her kan du velge en alternativ driver (enten OSS eller ALSA) for lydkortet "
"ditt (%s)."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "Lydkonfigurasjon"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Det er ingen OSS/ALSA alternative drivere for lydkortet ditt (%s) som n� "
"bruker \"%s\""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "Ingen alternativ driver"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
msgstr "Skru p� radiost�tte"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr "Radiost�tte"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "PLL-oppsett:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "Antall opptaksbuffere for minnekartlagt opptak"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr "Antall opptaksbuffere"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr "Mottagertype:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Card model:"
msgstr "Kortmodell:"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"For de fleste moderne TV-kort klarer bttv modulen til GNU/Linuxkjernen �\n"
"oppdage de fleste korrekte parameterene automatisk.\n"
"Dersom kortet ditt er feiloppdaget, kan du spesifisere den korrekte "
"mottager\n"
"og korrtypen her. Velg TVkortparameterne om n�dvendig."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "Ukjent|Generisk"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Ukjent|CPH06X (bt878) [mange leverand�rer]"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Ukjent|CPH05X (bt878) [mange leverand�rer]"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "Automatisk oppdagelse"

#: ../../interactive/newt.pm:1
#, c-format
msgid "Do"
msgstr "Gj�r"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ditt valg? (standard %s) "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "D�rlig valg, pr�v igjen\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "Re-submit"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Merk, et merke endret:\n"
"%s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Vennlig velg det f�rste nummeret av 10-range du �nsker � redigere,\n"
"eller bare trykk Enter for � fortsette.\n"
"Ditt valg? "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Det er mange ting � velge fra (%s).\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Ditt valg? (standard `%s'%s) "

#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr " skriv 'void' for tomt felt"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "�nsker du � klikke p� denne knappen? "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "Valg: `%s': %s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Ditt valg? (0/1, standard `%s') "

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Innganger du m� fylle:\n"
"%s"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Lasting av modul %s feilet.\n"
"�nsker du � pr�ve igjen med andre parametere?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "Spesifiser opsjoner"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "Automatisk sondering"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"I noen tilfeller trenger %s driveren � ha ekstra informasjon for � virke\n"
"ordentlig, selv om den normalt virker fint foruten. �nsker du � spesifisere "
"ekstra\n"
"opsjoner for den eller tillate driveren � sondere maskinen din for\n"
"informasjonen den trenger? Av og til vil sondering stoppe maskinen, men "
"burde\n"
"ikke for�rsake noen skader."

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "Hvilken %s driver skal jeg pr�ve?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "Modulopsjoner:"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Du kan n� oppgi dens opsjoner for modul %s.\n"
"Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n"
"F.eks., ``io=0x300 irq=7''"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Du kan n� gi modul %s de opsjoner du f�ler for.\n"
"Merk at addresser b�r gis med 0x prefikset som i '0x123'"

#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installerer driver for %s kort %s"

#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "Se maskinvareinfo"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Har du noen %s grensesnitt?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "Har du enda ett?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "Fant %s %s grensesnitt"

#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Du kan konfigurere hvert parameter av modulen her."

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "kommaseparerte strenger"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated numbers"
msgstr "kommaseparerte tall"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr "%d kommaseparerte strenger"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr "%d kommaseparerte tall"

#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "et nummer"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Du trenger Alcatel-mikrokode. Den kan lastes ned fra\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
". Kopier mgmt.o til /usr/share/speedtouch/."

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Den mest vanlige m�ten � koble opp med adsl er pppoe.\n"
"Noen oppkoblinger bruker pptp, noen f� bruker dhcp.\n"
"Hvis du ikke vet, velg 'bruk pppoe'"

#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "Koble opp mot Internett"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (med PPPoA) USB"

#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "bruk dhcp"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "bruk pptp"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr "bruk pppoe"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "Andre porter"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr "Alt (Ingen brannmur)"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""
"Ugyldig port oppgitt: %s.\n"
"Det korrekte formatet er \"port/tcp\" eller \"port/udp\",\n"
"der port er mellom 1 og 65535."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Du kan angi forskjellige porter.\n"
"Gyldige eksempler er: 139/tcp 139/udb.\n"
"Ta en titt p� /etc/services for mer informasjon."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Hvilke tjenester vil du tillate at andre p� internett kobler seg til?"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall-konfigurasjon\n"
"\n"
"Forsikre deg om at du har konfigurert nettverket ditt eller internett-"
"tilgang\n"
"med drakconnect f�r du fortsetter."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall konfigurering\n"
"\n"
"Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n"
"For en kraftig dedikert brannmurl�sning ta en kikk p� den\n"
"spesialiserte MandrakeSecurity Firewall distribusjonen."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "Inget nettverkskort"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "POP og IMAP-tjener"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "Mailtjener"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "Domenenavntjener"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "Webtjener"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zeroconf vertsnavn m� ikke inneholde en ."

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "Vertsnavn"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf Host name"
msgstr "Ukonfigurert vertsnavn"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""
"\n"
"\n"
"Angi et Zeroconf vertsnavn uten punktum dersom du ikke vil bruke\n"
"det foresl�tte vertsnavnet. "

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "Konfigurerer nettverk"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
"Vennligst velg hvilket nettverksadapter du �nsker � bruke til � koble opp\n"
"mot Internett"

#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "Velg nettverksgrensesnitt"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n"
"Jeg kan ikke sette opp denne tilkoblingstypen."

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcp-client."
msgstr ""
"Hvilken dhcp klient �nsker du � bruke?\n"
"Standard er dhcp-client"

#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde."

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst "
"velg et PCI-kort i neste skjermbilde."

#: ../../network/isdn.pm:1
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Hvilket av de f�lgende er ditt ISDN-kort?"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN-konfigurasjon"

#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "Avbryt"

#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "Fortsett"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Hvis du har et ISA kort burde verdiene i neste bilde v�re riktige.\n"
"\n"
"Hvis du har et PCMCIA kort m� du vite irq og io for kortet.\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "Jeg vet ikke"

#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "Hva slags kort har du?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "Fant \"%s\" grensesnitt - vil du benytte dette?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Hvilken protokoll �nsker du � bruke?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protokoll for resten av verden"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Resten av verden \n"
" ingen D-kanal (leid linje)"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol"
msgstr "Europeisk protokoll"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Europaprotokollen (EDSS1)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Velg din tilbyder.\n"
" Hvis denne ikke er i listen, velg ikke i listen"

#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr "Eksternt ISDN modem"

#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr "Internt ISDN-kort"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "Hva slags type er ISDN-tilknytningen din?"

#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "Nettverkskonfigurasjonveiviser"

#: ../../network/isdn.pm:1
#, c-format
msgid "Old configuration (isdn4net)"
msgstr "Gamle konfigurasjonen (isdn4net)"

#: ../../network/isdn.pm:1
#, c-format
msgid "New configuration (isdn-light)"
msgstr "Ny konfigurasjon (isdn-light)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Hvilken ISDN konfigurering foretrekker du?\n"
"\n"
"* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n"
"  verkt�y, den det er vanskelig � konfigurere for en nybegynner,\n"
"  og er ikke standardbasert.\n"
"\n"
"' Det nye konfigurasjonsverkt�yet er enklere � forst�,\n"
"  mer standardisert, men med f�rre verkt�y.\n"
"\n"
"Vi anbefaler den nye konfigurasjonen.\n"
"\n"

#: ../../network/modem.pm:1
#, c-format
msgid "Do nothing"
msgstr "Gj�r ingenting"

#: ../../network/modem.pm:1
#, c-format
msgid "Install rpm"
msgstr "Installer rpm"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
"\"%s\" basert Winmodem oppdaget, vil du installere n�dvendig programvare?"

#: ../../network/modem.pm:1
#, c-format
msgid "Title"
msgstr "Tittel"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Ditt modem er ikke st�ttet av systemet.\n"
"Se http://www.linmodems.org."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Andre DNS-tjener (valgfri)"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "F�rste DNS-tjener (valgfri)"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "Domenenavn"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "Scriptbasert"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "Terminalbasert"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Login ID"
msgstr "Login ID"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "Telefonnummer"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Navn tilknytning"

#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "Opsjoner oppringt"

#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "Nettverkskonfigurasjon"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Det oppsto problemer under konfigurasjon.\n"
"Test tilkoblingen din via net_monitor eller mcc. Hvis tilkoblingen din ikke "
"virker, �nsker du kanskje � kj�re konfigureringen p� nytt"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Etter at det er ferding, anbefaler vi at du restarter X\n"
"slik at du unng�r problemer med at vertsnavnet forandres."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"Gratulerer, internett og nettverkskonfigurasjonen er fullf�rt.\n"
"\n"
"Konfigurasjonen vil n� bli aktivert.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Et problem oppsto ved omstart av nettverket: \n"
"\n"
"%s"

#: ../../network/netconnect.pm:1
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Nettverket trengs � startes p� nytt. Vil du starte det p� nytt ?"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "Nettverkskonfigurasjon"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "�nsker du � starte tilkoblingen din ved oppstart?"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Internett tilkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Du har konfigureret flere m�ter � koble deg mot internett p�.\n"
"Venligst velg den du �nsker � bruker.\n"
"\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Velg oppkoblingen du �nsker � konfigurere"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "oppdaget ethernettkort"

#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "Lokalt nettverksoppkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "Kabeltilkobling oppdaget"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "Kabeltilkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected"
msgstr "oppdaget"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "ADSL oppkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr "oppdaget %s"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN-tilkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Winmodem connection"
msgstr "Winmodemtilkobling"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "oppdaget p� port %s"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "Normal modemtilkobling"

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "Finner enheter..."

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Mode"
msgstr "Ekspertmodus"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "Bruk automatisk oppdagelse"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "Velg profilen som skal konfigureres"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Velkommen til nettverkskonfigurasjonshjelperen\n"
"\n"
"Vi skal n� konfigurere din internett/nettverksoppkobling.\n"
"Hvis du ikke �nsker � bruke automatisk oppdagelse, fjern krysset\n"
"i boksen.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Fordi du holder p� med en nettverksinstallasjon er ditt "
"nettverksoppsettallerede konfigurert.\n"
"Trykk OK for � beholde din eksisterende konfigurasjon, eller avbryt for � "
"rekonfigurere din internett og nettverkskonfigurasjon.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Vi skal n� konfigurere %s oppkoblingen.\n"
"\n"
"\n"
"Trykk OK for � begynne."

#: ../../network/netconnect.pm:1
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Vi skal n� konfigurere din  %s tilkobling."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection & configuration"
msgstr "Internett tilkobling & konfigurasjon"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Configure the connection"
msgstr "Konfigurer tilkoblingen"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Disconnect"
msgstr "Koble fra"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Connect"
msgstr "Koble til"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Du kan rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can connect to the Internet or reconfigure your connection."
msgstr ""
"\n"
"Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are not currently connected to the Internet."
msgstr "Du er for �yeblikket ikke koblet opp mot Internett."

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Du kan koble ned eller rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are currently connected to the Internet."
msgstr "Du er for �yeblikket koblet opp mot Internett"

#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URLen b�r begynne med 'ftp:' eller 'http:'"

#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy burde v�re http://..."

#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "FTP-proxy"

#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "HTTP-proxy"

#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "Konfigurasjon proxy"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Gatewayadresse b�r v�re i format 1.2.3.4"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "DNS-tjener adresse b�r v�re i format 1.2.3.4"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "Gateway-enhet"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (f.eks. %s)"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "DNS-tjener"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Vennligst tast inn vertsnavnet ditt.\n"
"Vertsnavnet ditt b�r v�re et fullkvalifisert vertsnavn,\n"
"s� som ``minboks.mittlab.mittfirma.no''.\n"
"Du kan ogs� taste inn IP-adressen til gateway'en hvis du har en"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Hastighet skal ha suffix k, M eller G (for eksempel \"11M\"), eller "
"tilstrekkelig antall nuller"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Frekvens skal ha suffix k, M eller G (For eksempel \"2.46G\" for 2.64GHz "
"frekvens),\n"
"eller tilstrekkelig antall nuller (0). "

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adresse b�r v�re i format 1.2.3.4"

#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "Start ved oppstart"

#: ../../network/network.pm:1
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Tilegn vertsnavn fra DHCP-adresse"

#: ../../network/network.pm:1
#, c-format
msgid "Network Hotplugging"
msgstr "Nettverks Hotplugging"

#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Spor id nettverkskort (nyttig for b�rbare)"

#: ../../network/network.pm:1
#, c-format
msgid "DHCP host name"
msgstr "DHCP vertsnavn"

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr "Nettmaske"

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr "IP-adresse"

#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr "(bootp/dhcp/ukonfigurert)"

#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "Automatisk IP"

#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr " (driver %s)"

#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigurerer nettverksenhet %s"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Vennligst tast inn inn IP-konfigurasjonen for denne maskinen.\n"
"Hvert element b�r skrives som en IP-adresse i punkt-desimal\n"
"notasjon (f.eks, 1.2.3.4)."

#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"ADVARSEL: Denne enheten har tidligere blitt konfigurert til � koble opp mot "
"Internett.\n"
"Trykk OK for � beholde enhetens konfigurasjon.\n"
"Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen."

#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du "
"trenger muligens � konfigurere noe manuelt etter installasjon."

#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Brannmurkonfigurasjon oppdaget!"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "Konto passord"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "Konto logginn (brukernavn)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Oppkoblingens timout (i sekunder)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "Oppkoblingshastighet"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "Oppringningsmodus"

#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "Velg land"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "Tilbyder dns 2 (valgfri)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "Tilbyder dns 1 (valgfri)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "Telefonnummer tilbyder"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Navn tilbyder (f.eks. tilbyder.net)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "Ditt telefonnummer"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "Kort IO_1"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr "Kort IO_0"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "Kort IO"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr "Kort mem (DMA)"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "Kort IRQ"

#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr "Vennnligst fyll eller merk feltet under"

#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "Konfigurasjon tilknytning."

#: ../../network/tools.pm:1
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Det ser ikke ut til at systemet er koblet til Internett.\n"
"Pr�v � rekonfigurere tilkoblingen din."

#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Av sikkerhetsgrunner vil den bli frakoblet n�."

#: ../../network/tools.pm:1
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Systemet er n� koblet opp mot Internett."

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "Tester tilkoblingen din..."

#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Vil du pr�ve � koble opp mot Internett n�?"

#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "Internett-konfigurasjon"

#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Noe som ikke er bra skjer med disken din. \n"
"En test for � sjekke dataintegritet var mislykket. \n"
"Dette betyr at � skrive noe til disken vil ende opp med tilfeldig,\n"
"ubrukelig data"

#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (Standard)"

#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr "P� CUPS tjener \"%s\""

#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
msgid "Remote Printers"
msgstr "Fjern-skrivere"

#: ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr "(p� denne maskin)"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(p� %s)"

#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Ukjent modell"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "Ukjent modell"

#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: ../../printer/main.pm:1
#, c-format
msgid "Host %s"
msgstr "Vertsnavn %s"

#: ../../printer/main.pm:1
#, c-format
msgid "Network %s"
msgstr "Nettverk %s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
msgstr "Grensesnitt \"%s\""

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local network(s)"
msgstr "Lokale nettverk"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer (No driver)"
msgstr "R� skriver (ingen driver)"

#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", bruker kommando %s"

#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " p� Novell tjener \"%s\", skriver \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "p� SMB/Windows tjener \"%s\", del \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP vert \"%s\", port %s"

#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "p� LPD tjener \"%s\", skriver \"%s\""

#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr ", skriver til %s"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", multifunksjonsenhet"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", multifunksjonsenhet p� HP JetDirect"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on USB"
msgstr ", multifunksjonsenhet p� USB"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on parallel port \\#%s"
msgstr ", multifunksjonsenhet p� parallelport \\#%s"

#: ../../printer/main.pm:1
#, c-format
msgid ", USB printer"
msgstr ", USB skriver"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ", USB printer \\#%s"
msgstr ", USB skriver \\/%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " on parallel port \\#%s"
msgstr " p� parallelport \\/#%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "Lokale skrivere"

#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "Pipe inn i kommando"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "Skriverenhetens URI"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "Skriver p� en NetWare tjener"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Skriver p� SMB/Windows 95/98/NT server"

#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Nettverksskriver (TCP/Socket)"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "Skriver p� fjern-lpd tjener"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Skriver p� fjern-CUPS tjener"

#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "Fjern-skriver"

#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "Lokal skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "Konfigurerer applikasjoner..."

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Fjerner skriver \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "�nsker du virkelig � fjerne skriveren \"%s\"?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "Fjern skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Learn how to use this printer"
msgstr "L�r hvordan man skal bruke denne skriveren"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "Skriver ut testsider"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
"Klarte ikke � fjerne skriver \"%s\" fra Star Office/OpenOffice.org/GIMP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr "Skriveren \"%s\" har blitt fjernet fra StarOffice/OpenOffice.org/GIMP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Fjerner skriver fra Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Fjern denne skriveren fra Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
"Kunne ikke legge til skriveren \"%s\" til Star Office/OpenOffice.org/GIMP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
"Skriveren \"%s\" ble vellykket lagt til Star Office/OpenOffice.org/GIMP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Legger skriver til Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Legg denne skriveren til Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Skriveren \"%s\" er n� satt til standard skriver."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Default printer"
msgstr "Standardskriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr "Sett denne skriveren som standard"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "Opsjoner for skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr "Skriverprodusent, modell"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Skriverprodusent, modell, driver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Fjerner gammel skriver \"%s\" ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "Skrivernavn, beskrivelse, sted"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "Skrivertilkoblingstype"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "R� skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr "Gj�r det!"

#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "Close"
msgstr "Lukk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Skriver %s\n"
"Hva �nsker du � forandre p� denne skriveren?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "Modifiser skriverkonfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr "Legg til en ny skriver"

#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Normal Mode"
msgstr "Normalt modus"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr "Endrer utskriftssystemet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "CUPS konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "Frisker opp skriverliste (for � vise alle tilgjengelige CUPS skrivere)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "Vis alle tilgjengelige fjerne CUPS-skrivere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"De f�lgende skriverne er konfigurerte. Dobbeltklikk p� skriveren for � endre "
"oppsettet; for � gj�re den til standard printer; eller for � vise "
"informasjon om den."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing system: "
msgstr "Utskriftssystem: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr "Sjekker installert programvare..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr "Installerer Foomatic ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Klarte ikke � konfigurere skriver \"%s\"!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Konfigurerer skriver \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "Leser skriverdata: ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Hvilket utskriftsystem (spooler) �nsker du � bruke?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Spooler"
msgstr "Velg skrivertk�behandler"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Setting Default Printer..."
msgstr "Setter standardskriver..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing %s ..."
msgstr "Installerer %s ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing %s ..."
msgstr "Fjerner %s ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Skriversystemet (%s) vil ikke bli startet automatisk n�r maskinen startes.\n"
"\n"
"Det er mulig at dette ble skrudd av fordi det ble byttet til et h�yere\n"
"sikkerhetsniv�, ettersom skriversystemet er et mulig angrepsm�l.\n"
"\n"
"�nsker du � skru p� automatisk start av skriversystemet igjen?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Starter utskriftsystemet ved oppstart"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Du er i ferd med � installere skriversystemet %s p� et system som kj�rer\n"
"med sikkerhetsniv� %s.\n"
"\n"
"Skriversystemet kj�rer en tjeneste (bakgrunnsprosess) som venter p�\n"
"skriverjobber og h�ndterer disse. Denne tjenesten er ogs� tilgjengelig\n"
"fra andre maskiner p� nettverket og er s�ledes et mulig angrepsm�l. \n"
"Derfor startes bare noen f� utvalgte tjenester i dette sikkerhetsniv�et.\n"
"\n"
"Er du sikker p� at du vil sette opp skriver p� dette systemet?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Installerer et utskriftsystem p� %s sikkerhetsniv�et"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "paranoid"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "h�y"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "Starter skriversystemet p� nytt ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "Konfigurasjon av en fjernskriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Nettverket var ikke tilgjengelig, og kunne ikke startes. Kontroller\n"
"nettverkskonfigurasjonen og pr�v deretter � sette opp nettverks-\n"
"skriveren igjen."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""
"Nettverkskonfigurasjonen som er satt opp under installasjon kunne ikke\n"
"startes n�. Kontroller om nettverket er tilgjengelig etter at du har "
"startet\n"
"systemet og korriger eventuelt konfigurasjonen ved hjelp av \"Mandrake\n"
"Kontrollsenter\", under \"Nettverk og internett\"/ \"Forbindelse\", og sett\n"
"opp skriveren etterp�, ogs� i \"Mandrake Kontrollsenter\"/\"Maskinvare\"/\n"
"\"Skriver\". "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "Konfigurer nettverket n�"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr "Fortsett uten � konfigurere nettverket"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Du er i ferd med � sette opp en nettverksskriver. Dette krever at nettverket "
"er konfigurert, men dette er ikke gjort. Hvis du fortsetter uten � sette "
"opp\n"
"nettverket, vil du ikke bli i stand til � bruke skriveren du setter opp. "
"Hvordan vil du fortsette?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "Nettverksfunksjonalitet ikke konfigurert"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "Starter nettverk ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "Frisker opp skriverdata ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Du har overf�rt din tidligere standardskriver (\"%s\"). Skal denne settes "
"opp\n"
"som standardskriver ogs� under det nye skriversystemet - %s?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "Overf�r skriverkonfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transferring %s..."
msgstr "Overf�rer %s ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "Nytt skrivernavn"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Skriveren \"%s\" eksisterer allerede,\n"
"�nsker du � overskrive dens konfigurasjon?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Skrivernavn b�r inneholde kun bokstaver, tall og understrek"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr "Overf�r"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"En skriver med navnet \"%s\" eksisterer allerede p� %s. \n"
"Klikk \"Overf�r\" for � overskrive.\n"
"Du kan ogs� gi ett nytt skrivernavn, eller hoppe over denne skriveren."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not transfer printers"
msgstr "Ikke overf�r skrivere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Velg skriverene som du vil overflytte og klikk\n"
"\"Overf�r\"."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Skrivere konfigurert med PPD filene som produsenten har laget eller med CUPS "
"drivere ikke ikke overflyttes."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"I tillegg, k�er laget med dette programmet eller \"foomatic -configure\" kan "
"ikke overflyttes."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD og LPRng st�tter ikke IPP skrivere.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ st�tter bare lokale skrivere, fjern-LPD skrivere, og Socket/TCP "
"skrivere.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS st�tter ikke skrivere p� Novelltjenere eller skrivere som sender "
"dataene inn i en fritt formet kommando.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Du kan kopiere skriverkonfigurasjonen du har satt opp for k�tjeneren\n"
"%s til %s, din n�v�rende k�tjener. All konfigurasjonsdata (skrivernavn,\n"
"beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n"
"ikke jobber.\n"
"Ikke alle k�er kan overf�res grunnet:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"Din skriver har automatisk blitt satt opp slik at du har tilgang til\n"
"fotokortenheter fra din maskin. Du kan aksessere fotokort ved �\n"
"bruke det grafiske programmet \"MToolsFM\" (), eller kommando-\n"
"linjeverkt�yene \"mtools\" (Skriv \"man mtools\" for mer informasjon).\n"
"Du vil finne kortets filsystem under drevbokstaven \"p:\" eller p�f�lgende\n"
"bokstaver dersom du har mer enn en HP-skriver med fotokort. I\n"
"\"MToolsFM\" kan du bytte mellom drevbokstaver med feltet i �vre h�yre\n"
"hj�rne av fil-lista."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Din multifunksjonsenhet ble automatisk satt opp til � kunne scanne.\n"
"Du kan n� scanne med \"scanimage\" (\"scanimage -d hp:%s\" for �\n"
"spesifisere scanneren om du har mer enn en) fra kommandolinja eller\n"
"med de grafiske verkt�yene \"xscanimage\" eller \"xsane\". Hvis du\n"
"bruker GIMP, kan du ogs� scanne ved � velge et passende verkt�y\n"
"i \"Fil\"/\"Hent\" i menyen. For mer informasjon kan du kj�re \"man\n"
"scanimage\" p� kommandolinja\" .\n"
"\n"
"Ikke bruk \"scannerdrake\" for denne enheten!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "Skriver ut testside(r)..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "Skriv ut liste over valg"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Skriver ut p� skriver \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Skriver ut/Fotokort tilgang p� \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Skriver ut/Skanner p� \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Skriver ut/Skanner/Fotokort p� \"%s\""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"F�r � f� en liste over tilgjengelige valg for n�v�rende skriver se enten "
"listen nedenfor eller klikk p�  \"Print option list\" knappen.%s%s\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"\"%s\" og \"%s\" kommandoene tillater deg ogs� til � modifisere valgene for "
"en spesifik skriverjobb. Bare legg til de �nskede valgene til "
"kommandolinjen, feks. \"%s <fil>\".\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Du kan ogs� bruke det grafiske verkt�yet \"xpdq\" for � sette opsjoner\n"
"og h�ndtere skriverjobber.\n"
"Dersom du bruker KDE som skrivebordsmilj� har du en \"panikk-knapp\",\n"
"et ikon p� skrivebordet, som er merket \"Stopp skriver\", som stanser alle\n"
"skriverjobber �yeblikkelig n�r du klikker p� det. Dette er nyttig blant "
"annet\n"
"ved papirstopp.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Denne kommandoen kan du ogs� benytte i \"Skriverkommando\" feltet\n"
"i skriverdialogen til mange applikasjoner. Her skal du ikke oppgi et "
"filnanvn,\n"
"ettersom det er gitt av applikasjonen.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"F�r � skrive ut en fil fra kommandolinjen (terminalvindu) bruk kommandoen \"%"
"s <file>\" eller \"%s <file>\".\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"F�r � f� en liste over tilgjengelige valg for n�v�rende skriver klikk p� "
"\"Print option list\" knappen."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"\"%s\"-kommandoen tillater ogs� modifikasjon av opsjoner for en bestemt "
"skriverjobb. Du kan ganske enkelt angi de forskjellige opsjonene p� "
"kommandilinja, for eksempel \"%s <fil>\". "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"For � skrive ut en fil fra kommandolinja (terminalvindu), bruk kommandoen \"%"
"s <fil>\". \n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Dette er en liste over tilgjengelige opsjoner for skriveren:\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Disse kommandoene kan du ogs� bruke i \"Skriverkommando\" feltet i "
"skriverdialogen til mange applikasjoner, men her skal du ikke angi filnavnet "
"ettersom det er gitt av applikasjonen.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"For � skrive ut en fil fra kommandolinja (terminalvindu), kan du enten bruke "
"kommandoen \"%s <fil>\", eller et grafisk utskriftsverkt�y \"xpp <fil>\" "
"eller \"kprinter <fil>\". De grafiske verkt�yene lar deg velge skriver og "
"forandre utskriftsvalg enkelt. \n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr "Virker det som det skal?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
"Det kan ta litt tid f�r skriveren starter.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
"Det kan ta litt tid f�r skriveren starter.\n"
"Utskriftstatus:\n"
"%s\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "Ikke skriv ut noen testside"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "Fototestside"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "Alternativ testside (A4)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Alternativ testside (letter)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "Standard testside"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "Skriv ut"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "Ingen testsider"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Vennligst velg testsidene du �nsker � skrive ut.\n"
"Merk deg, fototestsiden kan ta lang tid � skrive ut, og p� laserskrivere med "
"for lite minne vil den ikke skrives ut i det hele tatt. Som regel vildet "
"holde � skrive ut standard testside."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "Testsider"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"�nsker du � sette denne skriveren (\"%s\")\n"
"som standard skriver?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr "Valg %s er utenfor rekkevidden!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr "Valg %s m� v�re ett tall!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Valg %s m� v�re ett helt tall!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer default settings"
msgstr "Skriver standardoppsett"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Standardskriverens instillinger\n"
"\n"
"Du b�r sjekke at sidest�rrelsen og blekktypen/printermodus (hvis "
"tilgjengelig)\n"
"og ogs� maskinvarekonfigurasjonen av laserprintere (minne, duplexenhet,  "
"ekstra papirholdere) er satt riktig. Merk deg at veldig god utskriftskvalite "
"kan gj�re utskriften mye tregere."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"For � kunne skrive med din Lexmark inkjet og denne konfigurasjonen, trenger "
"du inkjet skriverdriverene fra Lexmark (http://www.lexmark.com/). G� til US "
"web-stedet og klikk p� \"Drivers\" knappen. Velg s� din modell og etterp� "
"\"Linux\" som operativsystem. Driveren kommer som RPM-pakker eller skall- "
"skript med interaktiv grafisk installasjon. Du trenger ikke � gj�re denne "
"konfigurasjonen fra det grafiske grensesnittet. Abryt direkte etter license "
"agreement. Skriv s� skriverhode alignment sider med \"lexmarkmaintain\" og "
"juster hode alignment innstillinger med dette programmet."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Lexmark inkjet konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Inkjet skriverdrivere fra Lexmark st�tter bare lokale skrivere, ingen "
"skrivere p� fjernmaskiner eller skrivertjenerbokser. Koble skriveren til en "
"lokal port eller konfigurer den p� maskinen hvor det er koblet til."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Du konfigurerer en OKI laser winprinter. Disse skriverene bruker en veldig\n"
"spesiell kommunikasjonsprotokoll og virker derfor bare n�r de er koblet "
"tilden f�rste parallelporten. N�r skriveren er koblet til en annen port "
"eller til en skrivertjenerboks koble skriveren til den f�rste parallelporten "
"f�r du skriver en testside. Ellers vil ikke skriveren virke. Innstillinger "
"for oppkoblingstype vil bli ignorert av driveren."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI winprinter konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Hvis din skriver ikke finnes i listen velg en kompatibel (se i "
"skrivermanualen) eller en lignende."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Sjekk om Printerdrake gjorde autooppdagelsen av din skrivermodell riktig. "
"S�k korrekt modell i listen n�r pekeren st�r over en feil modell eller p� "
"\"R� skriver\"."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "Hva slags type skriver har du?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "Skrivervalg"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "Leser skriverdatabase  ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "Velg modell manuellt"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "Modellen er riktig"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake har sammenlignet modellnavnet fra autooppdaging av skriveremed "
"modellene oppgitt i skriverdatabasen for � finne beste match. match. Dette "
"valget kan v�re feil, spesielt hvis skriveren din ikke er oppgitt i det hele "
"tatt i databasen. Sjekk om valget er riktig og klikk \"Modellen er riktig\" "
"hvis den er det eller hvis ikke, klikk \"Velg modell manuellt\" s� du kan "
"velge skrivermodellen din manuellt i neste skjerm.\n"
"\n"
"Printerdrake har for skriveren din funnet:\n"
"\n"
"%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "Din skrivermodell"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "Forbereder skriverdatabase ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Location"
msgstr "Lokasjon"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Description"
msgstr "Beskrivelse"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr "Navn p� skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Alle skrivere trenger ett navn (f.eks. \"skriver\"). Beskrivelsen og "
"lokalisasjonsfeltene trenger ikke � fylles inn. De er brukerkommentarer."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Angi Skrivernavn og kommentar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Gj�r skriverport tilgjengelig for CUPS..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "Sjekker enhet og setter opp HPOJ"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr "Fotominnekort tilgang p� din HP multifunksjons enhet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "Scanner p� din HP multifunksjonsenhet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing mtools packages..."
msgstr "Installerer mtools pakker..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing SANE packages..."
msgstr "Installerer SANE pakker..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing HPOJ package..."
msgstr "Installerer HPOJ pakker..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"Er skriveren din en multifunksjonsenhet fra HP eller SONY\n"
"(OfficeJet, PSC, Laserjet 1100/1200/1220/3200/3300 med scanner,\n"
"Sony IJP-V100), en HP photosmart eller HP LaserJet 2200)?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A command line must be entered!"
msgstr "En kommandolinje m� oppgis!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Command line"
msgstr "Kommandolinje"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Her kan du spesifisere en vilk�rlig kommandolinje som jobben skal pipes til "
"istedet for � bli sendt direkte til en skriver. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Pipe into command"
msgstr "Pipe inn i kommando"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected model: %s %s"
msgstr "Oppdaget modell %s %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr "En korrekt URI m� oppgis!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr "Skriverenhet URI"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Du kan direkte oppgi URI til skriveren. URIen m� v�re i henhold til enten "
"CUPS eller Foomatic standarden. Ikke alle typer URIer st�ttes av "
"k�behandlerene."

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "Port"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP"
msgstr "Skriverens vertsnavn eller IP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr "Portnummer burde v�re numerisk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Skriverens vertsnavn eller IP mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"For � skrive til en TCP eller socket skriver, m� du oppgi vertsnavnet til "
"skriveren, og eventuelt portnummeret(9100 er standard). P� HP JetDirect "
"tjenere er portnummeret vanligvis 9100, p� andre tjenere kan dette variere. "
"Sjekk manualen til maskinvaren din."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Velg en av de automatisk oppdagede skriverne fra lista eller angi vertsnavn "
"eller IP adresse og eventuelt et portnummer (standard er 9100) i "
"tekstfeltene. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/Socket skrivervalg"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Vert \"%s\", port %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", vert \"%s\", port %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning network..."
msgstr "Scanner nettverk ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection"
msgstr "Automatisk oppdagelse av skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr "NCP k�navn mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr "NCP servernavn mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "Skriverk�-navn"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "Skrivertjener"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"For � skrive til en NetWare-skriver, m� du oppgi navnet til NetWare-"
"skrivertjeneren (Mer! Dette kan v�re forskjellig fra dens TCP/IP-vertsnavn!) "
"s� vel som navnet p� skriverk�en til skriveren du �nsker adgang til og "
"anvendelige brukernavn og passord."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr "NetWare skriveropsjoner"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Koble din skriver til en linuxtjener og la dine Windows maskiner koble seg "
"til som klient. \n"
"\n"
"Vil du virkelig fortsette � sette opp skriveren som dette?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Sett opp din windows skriver for � gj�re skriveren tilgjengelig med IPP "
"protokollen og sett opp utskrift fra denne maskinen med \"%s\"-"
"forbindelsestype i printerdrake. \n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Du er i ferd med � sette opp utskrift tli en Windows konto med passord. P� "
"grunn av en feil i arkitekturen til samba klientporgramvaren blir passordet "
"angitt i klartekst i kommandolinja til sambaklienten som skal sende "
"passordet til windows-tjeneren. Derfor er det mulig for alle brukere p� "
"denne maskinen � vise passordet p� kommandolinja med kommandoer som "
"\"psauxwww\". \n"
"\n"
"Vi anbefaler at du benytter et av de f�lgende alternativene ( I alle "
"tilfeller m�\n"
"du s�rge for at bare maskiner p� ditt lokale nettverk har tilgang til "
"windows-\n"
"tjeneren, for eksempel ved hjelp av en brannmur.):\n"
"\n"
"Benytt en passordl�s konto p� din windowstjener, for eksempel \"GUEST\"\n"
"kontoen eller en spesiell konto som er opprettet kun for utskrift. Du m� \n"
"IKKE fjerne passordet fra en vanlig konto eller administratorkontoen. \n"
"\n"
"Sett opp din windowstjener til � gj�re skriveren tilgjengelig under LPD-\n"
"protokollen. Sett s� opp utskrift fra denne maskinen med \"%s\"-"
"forbindelse-\n"
"type i Printerdrake.\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr "SIKKERHETS-ADVARSEL!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr "Samba delenavn mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Servernavnet eller serverens IP m� oppgis!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detected"
msgstr "Automatisk oppdaget"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "Arbeidsgruppe"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "Navn deling"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "SMB-tjener IP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "SMB-tjener vert"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
" Dersom den �nskede skriveren ble automatisk oppdaget automatisk, kan du "
"ganske enkelt velge den fra lista, og deretter legge til brukernavn, passord "
"og/eller arbeidsgruppe om n�dvendig. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"For � skrive til en SMB-skriver, m� du oppgi SMB-vertsnavnet (Merk! Dette "
"kan v�re forskjellig fra dens TCP/IP-vertsnavn!) og muligens IP-adressen til "
"skrivertjeneren, s� vel som det delte navnet til skriveren du �nsker tilgang "
"til og anvendelige brukernavn, passord og arbeidsgruppeinformasjon."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opsjoner for SMB (Windows 9x/NT) skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Skriver ut \"%s\" p� skriver \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", skriver \"%s\", p� tjener \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "Det eksterne vertsnavnet mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "Det eksterne vertsnavnet mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name"
msgstr "Fjern-skrivers navn"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "Fjern-vertsnavn"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"For � bruke en fjern-lpd skriverk�, m� du oppgi vertsnavnet til skriver- "
"tjeneren og skrivernavnet p� denne tjeneren."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opsjoner for fjern-lpd skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "Manuell konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Du m� velge/taste inn en skriver/enhet!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Parallelporter: /dev/lp0, /dev/lp1, ..., lik LPT1:, LPT2:, ..., 1st USB "
"skriver: /dev/usb/lp0, 2nd USB skriver: /dev/usb/lp1, ...)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Vennligst velg porten hvor skriveren din er koblet til."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Vennligst velg en port hvor skriveren din er tilkoblet eller tast inn en "
"enhet navn/filnavn i input-linjen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Vennligst velg skriveren hvor skriverjobbene skal g�."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Velg skriveren du vil sette opp. Konfigurasjonen til skriveren vil fungere "
"helt automatisk. Dersom skriveren din ikke ble korrekt oppdaget, eller du "
"foretrekker en tilpasset skriverinstallsjon, sett p� \"Manuell konfigurasjon"
"\". "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Her er en liste over alle skrivere som har blitt automatisk oppdaget."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "For �yeblikket s� er ingen alternative muligheter tilgjengelig"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Oppsettet til skriveren vil fungere helt automatisk. Dersom skriveren ikke "
"ble korrekt oppdaget, eller du foretrekker en tilpasset skriverinstallasjon, "
"velg \"Manuell konfigurasjon\". "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The following printer was auto-detected. "
msgstr "F�lgende skriver ble automatisk oppdaget."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Vennligst velg skriveren hvor jobbene skal g� eller skriv inn enhetsnavn/"
"filnavni input-linjen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Vennligst velg en port hvor skriveren din er tilkoblet eller skriv inn "
"enhetsnavn/filnavn  i input-linjen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr "Ellers kan du spesifisere enhetsnavn/filnavn i input-linjen."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Hvis det ikke er den vil konfigurere, skriv inn enhetsnavn/filnavn i input-"
"linjen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Available printers"
msgstr "Tilgjengelige skrivere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No printer found!"
msgstr "Ingen skriver funnet!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr "Du m� legge til en enhet eller et filnavn!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Ingen lokal skriver funnet! For � manuelt installere en skriver entr� et "
"enhets-navn/filnavn i input-linjen (Parallelporter: /dev/lp0, /dev/lp1, ..., "
"lik LPT1:, LPT2:, ..., 1st USB skriver: /dev/usb/lp0, 2nd USB skriver: /dev/"
"usb/lp1, ...)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "Lokal skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "USB printer \\#%s"
msgstr "USB skriver \\#%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on parallel port \\#%s"
msgstr "Skriver p� parallelport \\#%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Skriver \"%s\" p� SMB/Windows tjener \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Nettverksskriver \"%s\", port %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr "Oppdaget %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", skriver \"%s\" p� SMB/Windows tjener \"%s\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", nettverksskriver \"%s\", port %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"Gratulerer, din skriver er n� installert og konfigurert!\n"
"\n"
"Du kan skrive ut med \"Skriv ut\" kommandoen til ditt program (vanligvis i "
"\"Fil\" menyen).\n"
"\n"
"Hvis du �nsker � legge til, fjerne, eller gi en skriver ett nytt navn, eller "
"vis du �nsker � gj�re om standardvalg (papir, utskriftkvalitet, .....), velg "
"\"Skriver\" i \"Hardware\" delen av Mandrake Control Center."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr "Oppdag skrivere som er koblet til Windowsmaskiner automatisk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "Oppdag skrivere koblet direkte til det lokale nettverket automatisk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Finn skrivere tilkoblet denne maskin automatisk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Velkommen til skriveroppsett-veiviseren.\n"
"\n"
"Denne veiviseren hjelper deg � installere skrivere som er koblet til denne "
"maskinen.\n"
"\n"
"Dersom du har en skriver koblet til denne maskinen, plugg dem inn i maskinen "
"og skru dem p� s� de kan oppdages automatisk.\n"
"\n"
"Klikk p� \"Neste\" n�r du er klar, eller p� \"Avbryt\" dersom du ikke �nsker "
"� sette opp skrivere n�. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Velkommen til skriveroppsett-veiviseren.\n"
"\n"
"Denne veiviseren hjelper deg � installere skrivere som er koblet til denne "
"maskinen eller direkte til nettverket.\n"
"\n"
"Dersom du har en skriver koblet til denne maskinen, plugg dem inn i maskinen "
"og skru dem p� s� de kan oppdages automatisk. Skrivere p� nettverket m� ogs� "
"v�re skrudd p� og koblet til.\n"
"\n"
"Legg merke til at automatisk oppdagelse av skrivere p� nettverket tar lenger "
"enn oppdagelse av skrivere som er koblet til denne maskinen. Skru derfor av "
"Automatisk oppdagelse av nettverkskrivere dersom du ikke trenger det.\n"
"\n"
"Klikk \"Neste\" n�r du er ferdig, eller \"Avbryt\" dersom du ikke �nsker � "
"sette opp skrivere n�. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and your Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Velkommen til skriveroppsett-veiviseren.\n"
"\n"
"Denne veiviseren hjelper deg � installere skrivere som er koblet til denne "
"maskinen, direkte til nettverket, eller til en windowsmaskin p� nettverket.\n"
"\n"
"Dersom du har en skriver koblet til denne maskinen, plugg dem inn i maskinen "
"og skru dem p� s� de kan oppdages automatisk. Skrivere p� nettverket eller "
"som er tilkobler windowsmaskiner m� ogs� v�re skrudd p� og koblet til.\n"
" \n"
"Legg merke til at automatisk oppdagelse av skrivere p� nettverket tar lenger "
"enn oppdagelse av skrivere som er koblet til denne maskinen. Skru derfor av "
"Automatisk oppdagelse av nettverkskrivere dersom du ikke trenger det.\n"
"\n"
"Klikk \"Neste\" n�r du er ferdig, eller \"Avbryt\" dersom du ikke �nsker � "
"sette opp skrivere n�. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Velkommen til Skriverveiviseren\n"
"\n"
"Denne veiviseren lar deg installere lokale eller fjernskrivere som kan bli "
"brukt fra denne maskin, og ogs� fra andre maskiner i nettverket.\n"
"\n"
"Den sp�r etter all n�dvendig informasjon for � sette opp skriveren og gir "
"deg tilgang til alle tilgjengelige skriverdrivere, drivervalg og "
"skrivertilkoblinger."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake kunne ikke avgj�re hva slags modell skriveren \"%s\" er. "
"Vennligst velg den korrekte modellen fra lista. "

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid ")"
msgstr ")"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " on "
msgstr " p� "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "("
msgstr "("

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer ..."
msgstr "Konfigurerer skriver ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Searching for new printers..."
msgstr "S�ker etter nye skrivere..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"MERK: Avhengig av skrivermodell og utskriftssystemet, kan inntil %d MB med "
"tilleggsprogrammer bli installert."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Er du sikker p� at du vil sette opp skriver p� denne maskinen?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "�nsker du � aktivere skriving p� skriveren nevnt overnfor?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "�nsker du � � aktivere skriving p� denne printeren p� lokalnettet?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Vil du muliggj�re utskrift p� skriverene over, eller p� skrivere p� det "
"lokale nettverket?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (V�r sikker p� at skriveren din er koblet til og skrudd p�).\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""
"Det er ikke funnet noen skrivere som er koblet direkte til denne maskinen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"Det er %d ukjente skrivere koblet direkte til ditt system. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Det er en ukjent skriver koblet direkte til ditt system"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Den f�lgende skriveren\n"
"\n"
"%s%s\n"
"er koblet direkte til ditt system"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Den f�lgende skriveren\n"
"\n"
"%s%s\n"
"er koblet direkte til ditt system"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"De f�lgende skriverne\n"
"\n"
"%s%s\n"
"er koblet direkte til ditt system"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and %d unknown printers"
msgstr "og %d ukjente skrivere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and one unknown printer"
msgstr "og en ukjent skriver"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking your system..."
msgstr "Sjekker systemet ditt..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting CUPS..."
msgstr "Starter CUPS p� nytt..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Tjeneren er allerede i lista, den kan ikke legges til igjen.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Eksempler p� korrekte IPer:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Den spesifiserte IP-adressene er ikke riktig.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Server IP missing!"
msgstr "Tjener-IP mangler!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
"Angi IP adresse og port til tjeneren som har skriverene du vil benytte."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "G�r inn p� skrivere p� fjerne CUPS tjenere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected server"
msgstr "Fjern valgte tjener"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected server"
msgstr "Rediger valgte tjener"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add server"
msgstr "Legg til tjener"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Her kan du legge til CUPS tjenere hvis skrivere du vil benytte. Du trenger "
"bare gj�re dette dersom tjenerene ikke kringkaster skriverinformasjonen p� "
"det lokale nettverket. "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr "IP adresse tli tjener/nettverk:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
"Denne tjeneren/nettverket er allerede i lista, og kan ikke legges til "
"igjen.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Den angitte tjener/nettverks-IPen er ikke korrekt.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host/network IP address missing."
msgstr "Tjener/nettverks-IP mangler."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""
"Velg nettverket eller tjeneren som de lokale skriverene skal gj�res "
"tilgjengelige p�:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Sharing of local printers"
msgstr "Delin av lokale skrivere"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected host/network"
msgstr "Fjern valgte vert/nettverk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected host/network"
msgstr "Rediger valgt tjener/nettverk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr "Legg til tjener/nettverk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Dette er maskinene og nettverkene som den lokalt tilkoblede skriveren skal "
"gj�res tilgjengelig p�:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"N�r denne opsjonen er satt p�, vil CUPS hver gang den starter forsikre seg "
"om at\n"
"\n"
"- dersom LPD/LPRng er installert, vil ikke /etc/printcap overskrives av "
"CUPS\n"
"\n"
"- dersom /etc/cups/cupsd.conf mangler, vil den bli dannet\n"
"\n"
"- n�r skriverinformasjon er kringkastet, vil den ikke inneholde \"localhost"
"\" som tjenernavn.\n"
"\n"
"Dersom noen av disse tingene gir deg problemer, skru denne opsjonen av, men "
"da m� de selv s�rge for at disse punktene blir overholdt."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Automatisk retting av CUPS-konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "Endrer utskriftssystemet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"For � f� tilgang til fjern CUPS-tjenere i ditt lokale nettverk trenger du "
"bare � sl� p� \"Finn automatisk tilgjengelige skrivere p� fjerne maskiner\"-"
"valget: CUPS-tjenerene informerer maskinen din automatisk om skriverene. "
"Alle skriverene som f�r �yeblikket er kjent for maskinen din er listet i "
"\"Fjern-skrivere\" seksjonen i hovedvinduet til Printerdrake. Hvis CUPS-"
"tjeneren din ikke er i ditt lokale nettverk, m� du taste inn CUPS-tjeneren(e)"
"s IP-adresse(r) og evt. portnummeret for � f� skriver-informasjon fra "
"tjeneren(e)."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "None"
msgstr "Ingen"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Additional CUPS servers: "
msgstr "Andre CUPS tjenere i tilegg:"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid "No remote machines"
msgstr "Ingen fjerne maskiner"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Custom configuration"
msgstr "Egendefinert konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Printerdeling p� verter/nettverk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Finn tilgjengelige skrivere p� andre maskiner automatisk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Skriverene p� denne maskinen er tilgjengelig for andre maskiner"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Du kan her ogs� velge om skriverene p� andre maskiner skal gj�res "
"tilgjengelige p� denne maskinen."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Her kan du velge om skriverene som er koblet til denne maskinen skal v�re "
"tilgjengelige fra andre maskiner, og evt. hvilke maskiner som skal ha "
"tilgang. "

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "Cups skriverdeling-konfigurasjon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
"Automatisk oppdagelse av skrivere (lokale, TCP/sokkel, og SMB skrivere)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Skrivere p� fjern CUPS tjenere trenger du ikke � konfigurere her; disse "
"skriverene vil bli oppdaget automatisk."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "How is the printer connected?"
msgstr "Hvordan er skriveren tilkoblet?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "Velg skrivertilkobling"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the user umask."
msgstr ""
"Argumenter: (umask)\n"
"\n"
"Setter brukerens umask"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (val)\n"
"\n"
"Set the shell timeout. A value of zero means no timeout."
msgstr ""
"Argumenter: (val)\n"
"\n"
"Setter skallets timeout. Null betyr ingen timeout."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (size)\n"
"\n"
"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Argumenter: (size)\n"
"\n"
"Setter skallets kommandohistoriest�rrelse. 1 betyr ubegrenset."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "Sjekker tillegg/fjerning av sgid filer n�r satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr "Sjekker �pne porter n�r satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr "Sender epostrapport til denne adressen dersom satt, ellers til root."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "rapporterer kontrollresultat p� epost n�r satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"Sjekker filer eller kataloger som er skrivbare av alle n�r satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "Rapporterer kontrollresultat til tty dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "Kj�rer noen kontroller mot rpm-databasen dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr "Sjekker om nettverksenhetene er i promisku�s modus dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "Kj�rer chkrootkit kontroller dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"Sjekker tillatelser p� filer i brukerens hjemmekatalog dersom satt til ja. "

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr "Sjekker tillegg/fjerning av suid root filer dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "Rapporterer kontrollresultat til systemloggen dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set to yes, check for empty passwords, for no password in /etc/shadow and "
"for users with the 0 id other than root."
msgstr ""
"Sjekker for tomme passord, manglende passord i /etc/shadow og for for "
"brukere med brukeriD 0 som ikke er root dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "Kj�rer de daglige sikkerhetskontrollene dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "Sjekker kontrollsum p� suid/guid filer dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "Sjekker tomme passord i /etc/shadow dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr "Sjekker for filer uten eier dersom satt til ja."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the root umask."
msgstr ""
"Argumenter: (umask)\n"
"\n"
"Setter root sin umask."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (length, ndigits=0, nupper=0)\n"
"\n"
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Argumenter: (length, ndigits=0, nupper=0)\n"
"\n"
"Setter minimum passordlengde, minimum antall tall, og minimum antall store "
"bokstaver."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Set the password history length to prevent password reuse."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Stter passordhistorielengden for � hindre gjenbruk av passord. "

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (max, inactive=-1)\n"
"\n"
"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
"\\fP."
msgstr ""
"Argumenter: (max, inactive=-1)\n"
"\n"
"Setter passordaldring til \\fImax\\fP dager og forsinkelsen for endring til "
"\\fIinactive"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (name)\n"
"\n"
"Add the name as an exception to the handling of password aging by msec."
msgstr ""
"Argumenter: (navn)\n"
"\n"
"Legg til navnet som et unntak for h�ndteringen av passordforeldelse fra msec."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enable/Disable sulogin(8) in single user level."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver sulogin(8) i enbruker-niv�."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Activate/Disable daily security check."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver daglig sikkerhetssjekk."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Activate/Disable ethernet cards promiscuity check."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver ethernettkorts promiski�ssjekk."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Use password to authenticate users."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Bruk passord for � autentisere brukere."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
"Argumenter: (arg)\n"
"\n"
" Aktiver su bare for medlemmer av wheel gruppen eller tillat su fra hvilken "
"som helst bruker."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable msec hourly security check."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver msec sikkerhetssjekk hver time."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver loggingen av rare IPv4 pakker."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver libsafe hvis libsafe er funnet p� systemet."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable IP spoofing protection."
msgstr ""
"Argumenter: (arg, alert=1)\n"
"\n"
"Aktiver/Deaktiver IP forfalskningsbeskyttelse."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable name resolution spoofing protection.  If\n"
"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
"Argumenter: (arg, alert=1)\n"
"\n"
"Aktiver/Deaktiver navneoppslags forfalskningsbeskyttelse.  Hvis\n"
"\\fIalert\\fP er sann, rapporter ogs� til syslog."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
"expression describing what to log (see syslog.conf(5) for more details) and\n"
"dev the device to report the log."
msgstr ""
"Argumenter: (arg, expr='*.*', dev='tty12')\n"
"\n"
"Aktiver/Deaktiver syslog rapporter til konsol12. \\fIexpr\\fP er uttrykket\n"
"som beskriver hva som skal logges (se syslog.conf(5) for flere detaljer) og\n"
"dev er enheten som loggen skal rapporteres til."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
"allow and /etc/at.allow\n"
"(see man at(1) and crontab(1))."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aktiver/Deaktiver crontab og at for brukere. Plasser tillatte brukere i /etc/"
"cron.allow og /etc/at.allow\n"
"(se man at(1) og crontab(1))."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: ()\n"
"\n"
"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
"server\n"
"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
"server\n"
"is used by chkconfig --add to decide to add a service if it is present in "
"the file\n"
"during the installation of packages."
msgstr ""
"Argumenter: ()\n"
"\n"
"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis frav�rende) er st�rre enn 3\n"
"i /etc/security/msec/security.conf, opprettes symlinken /etc/security/msec/"
"server\n"
"til � peke til /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/"
"server\n"
"brukes av chkconfig --add for � avgj�re om en tjeneste skal legges til hvis "
"den er tilstede i filen\n"
"under installasjonenen av pakker."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
"\\fIarg\\fP = ALL. Only local ones\n"
"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
"services you need, use /etc/hosts.allow\n"
"(see hosts.allow(5))."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Autoriser alle tjenester kontrollert av tcp_wrappers (se hosts.deny(5)) hvis "
"\\fIarg\\fP = ALL. Bare lokale\n"
"hvis \\fIarg\\fP = LOCAL og ingen hvis \\fIarg\\fP = NONE. For � "
"autoriseretjenestene du trenger, bruk /etc/hosts.allow\n"
"(se hosts.allow(5))."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Dette argumentet spesifiserer om klienter er autoriserte til � koble\n"
"til X-tjeneren p� tcp port 6000 eller ei."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, listen_tcp=None)\n"
"\n"
"Allow/Forbid X connections. First arg specifies what is done\n"
"on the client side: ALL (all connections are allowed), LOCAL (only\n"
"local connection) and NONE (no connection)."
msgstr ""
"Argumenter: (arg, listen_tcp=None)\n"
"\n"
"Tillat/Forby X-tilkoblinger. F�rste argumentet spesifiserer hva som er\n"
"gjort p� klientsiden: ALL (alle tilkoblinger er tillatt), LOCAL (bare\n"
"lokale tilkoblinger) og NONE (ingen tilkoblinger)."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Tillat/Forby liste over brukere p� systemet i innloggingsh�ndterer (kdm, "
"mdkdm og gdm)"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid direct root login."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Tillat/Forby direkte root-innlogging"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid remote root login."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Tillat/Forby fjern root-innlogging"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid reboot by the console user."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aksepter/Nekt omstart av konsolbrukeren."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
"\\fP = NONE no issues are\n"
"allowed else only /etc/issue is allowed."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"If \\fIarg\\fP = ALL tillater /etc/issue og /etc/issue.net � eksistere. Hvis "
"\\fIarg\\fP = NONE ingen n issues f�r\n"
"tillatelse, ellers er bare /etc/issue tillatt."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid autologin."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Tillat/Forby automatisk innlogging."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse icmp echo."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aksepter/Nekt icmp echo."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse broadcasted icmp echo."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aksepter/Nekt kringkastede icmp echo."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Accept/Refuse bogus IPv4 error messages."
msgstr ""
"Argumenter: (arg)\n"
"\n"
"Aksepter/Nekt tullete IPv4 feilmeldinger."

#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Sikkerhetsadministrator (login eller email)"

#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Ett bibliotek som beskytter mot buffer overflow og strengformateringsangrep."

#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "Bruk libsafe for tjenere"

#: ../../security/level.pm:1
#, c-format
msgid "Security level"
msgstr "Sikkerhetsniv�"

#: ../../security/level.pm:1
#, c-format
msgid "Please choose the desired security level"
msgstr "Vennligst velg �nsket sikkerhetsniv�"

#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "Draksec standardvalg"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Basert p� forrige niv�, men n� er systemet fullstendig stengt.\n"
"Sikkerhetsfunksjonene er n� p� maksimum."

#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Med dette sikkerhetsniv�et kan systemet brukes som tjener.\n"
"Sikkerheten er n� h�y nok til � bruke systemet som en tjener som godtar\n"
"oppkoblinger fra mange klienter. Merk: Hvis maskinen din kun er en klient p� "
"Internett burde du velge et lavere niv�."

#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Det er allerede noen restriksjoner, og flere automatiske kontroller kj�res "
"hver natt."

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til "
"tilkobling mot Internett som klient."

#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Passord er n� aktivert, men bruk som nettverksmaskin er fortsatt ikke "
"anbefalt."

#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Dette niv�et b�r brukes med forsiktighet. Det gj�r systemet ditt lettere �\n"
"bruke, men mer utsatt: det m� ikke brukes p� en maskin koblet til andre\n"
"eller til Internett. Det er ingen adgang med passord."

#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "Paranoid"

#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "H�yere"

#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "H�y"

#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "D�rlig"

#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "Velkommen til Crackers"

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Vennligst logg inn i %s p� nytt for � aktivere endringene"

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Vennligst logg ut og bruk s� Ctrl-Alt-BackSpace"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
"/etc/hosts.allow og /etc/hosts.deny er allerede konfigurerert - ikke endret"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Trenger � opprette /etc/dhcpd.conf f�rst!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Noe gikk feil! - Er mkisofs installert?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Etheroppstart ISO imagefil er %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr "Ingen diskettstasjon tilgjengelig!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr "Disketten kan fjernes n�"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr "Kunne ikke f� tilgang til diskettstasjonen!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr "Sett inn en diskett:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Write Config"
msgstr "Skriv konfigurasjon"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "Dynamisk IP-adresse br�nn:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"De fleste av disse verdiene ble hentet\n"
"ut fra ditt system.\n"
"Du kan endre dem etter behov."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Server Configuration"
msgstr "dhcpd tjener-konfigurasjon"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range End:"
msgstr "IP-rekke slutt:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range Start:"
msgstr "IP-rekke start:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Name Servers:"
msgstr "Navntjenere:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Domain Name:"
msgstr "Domenenavn:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Broadcast Address:"
msgstr "Broadcastadresse:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet Mask:"
msgstr "Subnettmaske:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
msgstr "Routere:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Netmask:"
msgstr "Nettmaske:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet:"
msgstr "Subnett:"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Trenger � starte innlogginsh�ndterer p� nytt for at alle endringer skal tre "
"i effekt. \n"
"(service dm restart - i konsolet)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Config..."
msgstr "dhcpd Konfigurasjon..."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete Client"
msgstr "Slett klient"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Rediger klient"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add Client -->"
msgstr "Legg til klient -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Allow Thin Clients"
msgstr "Tillat tynne klienter"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Thin Client"
msgstr "Tynn klient"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No net boot images created!"
msgstr "Ingen nettverksoppstart imagefiler ble laget!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: %s"
msgstr "type: %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Del User"
msgstr "<-- Slett bruker"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add User -->"
msgstr "Legg til bruker -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Indikerer at passordet i systemdatabasen er annerledes enn\n"
" det i terminalserver-databasen.\n"
"Slett/legg til bruker p� nytt i terminalserveren for � aktivere innlogging."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete All NBIs"
msgstr "Slett alle NBI'er"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Delete"
msgstr "<-- Slett"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "This will take a few minutes."
msgstr "Dette vil ta en stund."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build All Kernels -->"
msgstr "Bygge alle kjerner -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No NIC selected!"
msgstr "Inget nettverkskort valgt!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Single NIC -->"
msgstr "Bygg for et enkelt nettverkskort -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No kernel selected!"
msgstr "Ingen kjerne valgt!"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Bygg hele kjernen -->"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot ISO"
msgstr "Oppstarts-ISO"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot Floppy"
msgstr "Oppstarts-diskett"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"drakTermServ Overview\n"
"\t\t\t   \n"
"        - Create Etherboot Enabled Boot Images:\n"
"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
"must be created.\n"
"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical interface\n"
"        \t\tto help manage/customize these images.\n"
"\n"
"        - Maintain /etc/dhcpd.conf:\n"
"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP address\n"
"        \t\tand net boot images to the machine. drakTermServ helps create/"
"remove these entries.\n"
"\t\t\t\n"
"        \t\t(PCI cards may omit the image - etherboot will request the "
"correct image. You should\n"
"        \t\talso consider that when etherboot looks for the images, it "
"expects names like\n"
"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
"like:\n"
"        \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address              192.168.192.3;\n"
"\t\t\t\t\t#type                          fat;\n"
"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
"entry for\n"
"\t\t\ta client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
"either be \"thin\"\n"
"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run most\n"
"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
"$IP=client_ip\\$\\$ is\n"
"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are modified\n"
"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
"issues in using xdmcp,\n"
"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
"subnet.\n"
"\t\t\t\n"
"\t\t\tNote: You must stop/start the server after adding or changing "
"clients.\n"
"\t\t\t\n"
"        - Maintain /etc/exports:\n"
"        \t\tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \t\tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \t\tdiskless clients.\n"
"\n"
"        \t\tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t\t/                  (ro,all_squash)\n"
"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tWith SUBNET/MASK being defined for your network.\n"
"        \t\t\n"
"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
"        \t\tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
"\\$. drakTermServ helps\n"
"        \t\tin this respect by adding or removing system users from this "
"file.\n"
"\n"
"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future drakTermServ "
"will help create these\n"
"        \t\tfiles.\n"
"\n"
"        - Per client system configuration files:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future, "
"drakTermServ can help create files\n"
"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
"keyboard on a per-client\n"
"        \t\tbasis.\n"
"\n"
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ will configure this file to work in conjunction "
"with the images created by\n"
"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to each\n"
"        \t\tdiskless client.\n"
"\n"
"        \t\tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \t\tservice tftp\n"
"        \t\t(\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t\t}\n"
"        \t\t\n"
"        \t\tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \t\tputs it's images.\n"
"\n"
"        - Create etherboot floppies/CDs:\n"
"        \t\tThe diskless client machines need either ROM images on the NIC, "
"or a boot floppy\n"
"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
"generate these images,\n"
"        \t\tbased on the NIC in the client machine.\n"
"        \t\t\n"
"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
msgstr ""
"drakTermServ oversikt\n"
"\t\t\t   \n"
"        - Lag Etheroppstartsaktiverte oppstartsimagefiler:\n"
"        \t\tFor � starte med en kjerne via etheroppstart, m� en spesiell "
"kjerne/initrd imagefil opprettes.\n"
"        \t\tmkinitrd-net gj�r mye av dette arbeidet og drakTermServ er bare "
"et grafisk grensesnitt\n"
"        \t\tfor � hjelpe til med � h�ndtere/endre p� disse imagefilene.\n"
"\n"
"        - Vedlikehold /etc/dhcpd.conf:\n"
"        \t\tFor � starte klientene over nettverk, hver klient trenger en "
"entr� i dhcpd.conf, som gir ut en IP-adresse\n"
"        \t\tog nettverksoppstart imagefiler til maskinen. drakTermServ "
"hjelper til med � lage//fjerne disse entr�ene.\n"
"\t\t\t\n"
"        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil foresp�rre "
"denriktige imagefilen. Du burde\n"
"        \t\togs� vurdere det n�r etherboot ser etter bildefilene, den "
"forventer navn som\n"
"        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tEn typisk dhcpd.conf strofe for � st�tte diskl�se klienter "
"serslik ut:\n"
"        \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address              192.168.192.3;\n"
"\t\t\t\t\t#type                          fat;\n"
"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tMens du kan bruke en br�nn av IP-adresse, framfor � sette opp en "
"spesifikoppsettsentr� for\n"
"\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
"bruken\n"
"\t\t\tav klientspesifike konfigurasjonsfiler som ClusterNFS tilbyr.\n"
"\t\t\t\n"
"\t\t\tMerk: \"#type\" entr�en er bare brukt av drakTermServ.  Klienter "
"kanenten v�re \"tynne\"\n"
"\t\t\teller 'fete'.  Tynne klienter kj�rer mesteparten av programvaren via "
"xdmcp, mens tykke klienter kj�rer mesteparten\n"
"av programvaren p� klientmaskinen. En spesiell inttab, /etc/inittab\\$\\"
"$IP=client_ip\\$\\$ blir\n"
"\t\t\tskrevet for tynne klienter. Systemkonfigurasjonsfilene xdm-config, "
"kdmrc, og gdm.conf blir modifiserte\n"
"\t\t\thvis tynne klienter blir brukt, for � aktivere xdmcp. Siden det er "
"sikkerhetsproblematikkrundt bruken av xdmcp,\n"
"\t\t\ts� blir hosts.deny og hosts.allow endret for � begrense tilgangen til "
"det lokale subnettet.\n"
"\t\t\t\n"
"\t\t\tMerk: Du m� stoppe/starte tjeneren etter � ha lagt til eller "
"endretklienter.\n"
"\t\t\t\n"
"        - Vedlikehold /etc/exports:\n"
"        \t\tClusternfs lar deg eksportere rot-filsystemet til diskl�se "
"klienter, drakTermServ\n"
"        \t\tsetter opp de riktige entr�ene for � tillate anonym tilgang "
"tilrot-filsystemet fra\n"
"        \t\tdiskl�se klienter.\n"
"\n"
"        \t\tEn typisk eksportering-entr� for clusternfs er:\n"
"        \t\t\n"
"        \t\t/                  (ro,all_squash)\n"
"        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk.\n"
"        \t\t\n"
"        - Vedlikehold /etc/shadow\\$\\$CLIENT\\$\\$:\n"
"        \t\tFor at brukere skal kunne logge inn p� systemet fra en "
"diskl�sklient, s� m� deres entr� i\n"
"        \t\t/etc/shadow kopieres inn i /etc/shadow\\$\\$CLIENTS\\$\\$. "
"drakTermServ hjelper til\n"
"        \t\tved � legge til og slette brukere fra denne filen.\n"
"\n"
"        - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
"        \t\tGjennom clusternfs s� kan hver diskl�se klient ha deres "
"egneunike konfigurasjonsfil\n"
"        \t\tp� rot filsystemet p� tjeneren. I fremtiden vil drakTermServ "
"kunne hjelpe til med � lage disse\n"
"        \t\tfilene.\n"
"\n"
"        - Per klient systemkonfigurasjonsfiler:\n"
"        \t\tGhennomclusternfs s� hver diskl�se klient ha deres egne unike "
"konfigurasjonsfiler\n"
"        \t\tp� rot-filesystemet p� tjeneren. I fremtiden vil drakTermServ "
"kunne hjelpe til med � opprette disse filene\n"
"        \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
"sysconfig/keyboard p� per klient\n"
"        \t\tbasis.\n"
"\n"
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ vil configure denne filen til � virke sammenmed "
"imagefilene som blir opprettet av\n"
"        \t\tmkinitrd-net, og entr�ene i /etc/dhcpd.conf, for � gi "
"utnettverks oppstartsimagefilene til hver \n"
"        \t\tdiskl�se klient.\n"
"\n"
"        \t\tEn typisk tftp konfigurasjonsfil ser slik ut:\n"
"        \t\t\n"
"        \t\tservice tftp\n"
"        \t\t(\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t\t}\n"
"        \t\t\n"
"        \t\tForandringen her fra den vanlige installasjonen er forandringen "
"av disable flagget til\n"
"        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor mkinitrd-"
"net\n"
"        \t\tplassere sine imagefiler.\n"
"\n"
"        - Opprett etherboot disketter/CD'er:\n"
"        \t\tDe diskl�se klientmaskinene trenger enten ROM imagefiler p� "
"nettverkskortet, en oppstartsdiskket\n"
"        \t\teller en CD for � initiere oppstartssekvensen.  drakTermServ vil "
"hjelpe til med generere disse imagefilene,\n"
"        \t\tbasert p� nettverkskortet i klientmaskinen.\n"
"        \t\t\n"
"        \t\tEt basis eksempel p� opprrettelse av en oppstartsdiskett for "
"3Com 3c509 manuelt:\n"
"        \t\t\n"
"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""
"\n"
"\n"
" Takk til:\n"
"\t- LTSP Prosjektet http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""
"\n"
" Copyright (C) 2002 ved MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Clients"
msgstr "Legg til/slett klienter"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Users"
msgstr "Legg til/slett brukere"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
msgstr "Nettverksoppstart-imagefiler"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Etherboot-diskett/ISO"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Stop Server"
msgstr "Stopp tjener"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Start Server"
msgstr "Start tjener"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Server"
msgstr "Deaktiver tjener"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
msgstr "Aktiver tjener"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Mandrake Terminal Server Configuration"
msgstr "Mandrake Terminalserver konfigurasjon"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Remove the last item"
msgstr "Fjern siste enhet"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Add an item"
msgstr "Legg til en enhet"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install"
msgstr "Autoinstallering"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketten har blitt generert.\n"
"Du kan n� gjennomf�re installasjonen p� nytt."

#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
msgstr "Gratulerer!"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Velkommen.\n"
"\n"
"Parametrene av auto-install er tilgjengelige i seksjonen til venstre"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Creating auto install floppy"
msgstr "Oppretter diskett for autoinstallasjon"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "manual"
msgstr "manual"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Vennligst velg for hvert steg om det skal v�re som under installasjonen, "
"eller manuelt"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Konfigurasjon av automatiske skritt"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "replay"
msgstr "gj�r igjen"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Du holder p� med � konfigurere en automatisk installasjonsdiskett. Denne "
"muligheten erlitt farlig, og m� brukes forsiktig.\n"
"\n"
"Med denne muligeten vil du kunne kj�re installasjonen du gjennomf�rte p� "
"denne maskinenp� nytt, med muligheten for � selv kunne forandre p� noen av "
"instillingene.\n"
"\n"
"For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli "
"gjennomf�rt automatisk, uansett hva du valgte under installasjonen.\n"
"\n"
"�nsker du � fortsette?"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install Configurator"
msgstr "Autoinstallasjonskonfigurering"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Jeg kan ikke finne filen '%s' som jeg trenger."

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Error!"
msgstr "Feil!"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""
"\n"
"Problemer ved gjenoppretting fra sikkerhetskopi:\n"
"\n"
"Under gjenopprettingssteget s� vil DrakBackup sjekke alle dine\n"
"sikkerhetskopifiler f�r dem blir gjenopprettet.\n"
"F�r du gjenoppretter s� vil DrakBackup fjerne din\n"
"opprinnelige katalog, og du vil miste alle dine data. \n"
"Det er viktig at du er forsiktig og ikke modifiserer \n"
"sikkerhetskopidata for h�nd.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""
"valgbeskrivelse:\n"
"\n"
"V�r varsom n�r du bruker ftp-sikkerhetskopiering, siden bare \n"
"sikkerhetskopier som allerede er ferdige blir sendt til tjeneren.\n"
"S� for �yeblikket s� trenger du � lage sikkerhetskopien p� din \n"
"harddisk f�r du sender den til tjeneren.\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backups will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""
"Beskrivelse:\n"
"\n"
"  Drakbackup blir brukt til � ta sikkerhetskopi av ditt system.\n"
"  Under konfigureringen kan du velge: \n"
"\t- Systemfiler, \n"
"\t- Brukerfiler, \n"
"\t- Andre filer.\n"
"\teller hele ditt system ... og Andre (som Windows partisjoner)\n"
"\n"
"  Drakbackup lar deg ta sikkerhetskopi av ditt system til:\n"
"\t- Harddisk.\n"
"\t- NFS.\n"
"\t- CD-ROM (CDRW), DVD-ROM (med autoboot, rescue og autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup lar deg gjenopprette ditt system til\n"
"  en egenvalgt katalog.\n"
"\n"
"  Som standard s� vil alle dine sikkerhetskopier bli lagret i din\n"
"  /var/lib/drakbackup katalog.\n"
"\n"
"  Konfigurasjonsfiler:\n"
"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
"Gjenopprettelsessteg:\n"
"  \n"
"  Under gjenopprettelsessteget s� vil DrakBackup fjerne \n"
"  din opprinnelige katalog og sjekke at alle \n"
"  sikkerhetskopifiler ikke er blitt korrupte. Det er anbefalt at \n"
"  du gj�r en siste sikkerhetskopi f�r du gjenoppretter.\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
" oppdateringer 2002 MandrakeSoft ved Stew Benedict <sbenedict\\@mandrakesoft."
"com>"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
"fr>"
msgstr ""
" Copyright (C) 2001-2002 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita."
"fr>"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
"\n"
"So if you don't want to restore a user please unselect all their\n"
"check boxes.\n"
"\n"
"Otherwise, you are able to select only one of these.\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption to use. This option allows you to \n"
"\tbackup all of your data the first time, and \n"
"\tonly the changed data after.\n"
"\tSo you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""
"gjenopprettelsesbeskrivelse:\n"
" \n"
"Bare den alle siste datoen vil bli brukt, pga. voksende sikkerhetskopier \n"
"s� er det n�dvendig � gjenopprette en etter en med eldre sikkerhetskopier.\n"
"\n"
"S� om du ikke vil gjenopprette en bruker, velg vekk all deres\n"
"sjekkbokser.\n"
"\n"
" - Voksende sikkerhetskopier:\n"
"\n"
"\tVoksende sikkerhetskopi er den mest opsjonen \n"
"\tvalget du kan bruke. Dette valget tillater deg � \n"
"\tta sikkerhetskopi av alle dine data f�rste gangen, og \n"
"\tbare den forandrede dataen senere.\n"
"\tS� da vil du ha muligheten til under gjenopprettingen,\n"
"\t� kunne gjenopprette dine data fra en bestemt\n"
" dato\n"
"\tHvis du ikke har valgt denne opsjonen, s� vil alle\n"
"\teldre sikkerhetskopier bli slettet f�r hver sikkerhetskopiering.    \n"
"\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include the web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed data afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""
"Beskrivelse av opsjoner:\n"
"\n"
" - Backup av systemfiler:\n"
"       \n"
"\tDenne opsjonen lar deg ta backup av din /etc katalog,\n"
"\tsom inneholder alle konfigurasjonsfiler. V�r \n"
"\tforsiktig s� du ikke overskriver:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Ta backup av brukerfiler: \n"
"\n"
"\tDette valget lar deg velge alle brukere som du  \n"
"\t�nsker � ta backup av .\n"
"\tFor � spare plass anbefales det at du ikke  \n"
"\tinkluderer nettleserens cache.\n"
"\n"
" - Ta backup av andre filer: \n"
"\n"
"\tDenne opsjonen lar deg legge til mer data.\n"
"\tMed de andre backupvalgene er det ikke\n"
"\tmulig � velge inkrementell backup.\t\t\n"
" \n"
" - Inkrementell backup:\n"
"\n"
"\tDEtte er det kraftigste valget for � ta \n"
"\tbackup. Dette valget lar deg ta backup \n"
"\tav alle data den f�rste gangen, og senere \n"
"\tbare data som har endret seg.\n"
"\tDu kan senere gjenopprette data \n"
"\tfra en spesifisert dato.\n"
"\tHvis du ikke har valgt denne opsjonen blir \n"
"\talle gamle backups slettet f�r ny blir kj�rt.    \n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""
"\n"
" Noen feil oppdaget under senmail er for�rsaket\n"
" av feil konfigurasjon av postfix. For � rette det s� m�\n"
" du sette myhostname eller mydomain i /etc/postfix/main.cf\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %%).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time (about 1000%% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         #> cat .backupignore\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""
"Beskrivelse av opsjoner::\n"
"\n"
" Her vil Drakbackup tillate endring av:\n"
"\n"
" - Kompresjonsmodus:\n"
"    \n"
"      Hvis du velger bzip2 kompresjon, vil du komprimere\n"
"      dataene bedre enn med gzip (ca 2-10 %%).\n"
"      Dette er ikke valgt som standard siden\n"
"      slik kompresjon tar lenger tid (ca 1000%% mer).\n"
" \n"
" - Oppdateringsmodus:\n"
"\n"
"      Denne opsjonen vil oppdatere din backup, men \n"
"      er ikek s�rlig nyttig siden du m� dekomprimere\n"
"      din backup f�r du kan oppdatere den.\n"
"      \n"
" - Ignorer backup modus:\n"
"\n"
"      Som CVS vil Drakbackup ignorere alle referanser\n"
"      inkludert i .backupignore filer i hver katalog.\n"
"      eks: \n"
"         #> cat .backupignore\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore"
msgstr "Gjenopprett"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now"
msgstr "Ta sikkerhetskopi n�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Advanced Configuration"
msgstr "Avansert konfigurasjon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wizard Configuration"
msgstr "Veiviser-konfigurasjon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Backup Configuration."
msgstr "Vis sikkerhetskopiert konfigurasjon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now from configuration file"
msgstr "Ta sikkerhetskopi n� fra konfigurasjonsfil"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup Configuration"
msgstr "Drakbackup konfigurasjon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Total Progress"
msgstr "Total framgang"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files..."
msgstr "Sender filer..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "files sending by FTP"
msgstr "filer sendt av FTP"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup other files"
msgstr "Ta sikkerhetskopi av filer"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup user files"
msgstr "Ta sikkerhetskopi av brukerfiler"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files"
msgstr "Ta sikkerhetskopi av systemfiler"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
msgstr "Under Utvikling ... vennligst vent."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Ingen konfigurasjonsfil funnet \n"
"vennligst klikk Veiviser eller Avansert."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to backup..."
msgstr "Vennligst velg data til � ta sikkerhetskopi av..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select media for backup..."
msgstr "Vennligst velg media for sikkerhetskopi..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
msgstr "Vennligst velg data for � gjenopprette..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "De f�lgende pakker trenger � bli installert:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"Feil under sending av fil via FTP.\n"
" Vennligst velg din FTP-konfigurasjon."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""
"Feil under sendmail.\n"
"  Din rapport ble ikke sent.\n"
"  Venligst konfigurer sendmail"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Next"
msgstr "Neste"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Previous"
msgstr "Forrige"

#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
#: ../../standalone/logdrake:1
#, c-format
msgid "Save"
msgstr "Lagre"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Build Backup"
msgstr "Lag sikkerhetskopi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Progress"
msgstr "Gjenopprettelseprogress"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Catalog"
msgstr "Gjenopprett fra katalog"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Browse to new restore repository."
msgstr "Bla deg fram til nytt gjenoppretelsesrepositorie."

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD in place - continue."
msgstr "CD p� plasse - fortsett."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom Restore"
msgstr "Egendefinert gjenoppretting"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore all backups"
msgstr "Gjenopprett alle sikkerhetskopier"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Failed..."
msgstr "Feil ved gjenoppreting..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Files Restored..."
msgstr "Filer gjenopprettet..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Path or Module required"
msgstr "Filbane eller modul kreves"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hostname required"
msgstr "Vertsnavn kreves"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Username required"
msgstr "Brukernavn kreves"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Password required"
msgstr "Passord trengs"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Path or Module"
msgstr "Vert Filbane eller modul"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Name"
msgstr "Vertsnavn"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Gjenopprett via nettverksprotokol: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network"
msgstr "Gjenopprett via nettverk"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "Ikke det riktige sikkerhetskopinavnet. Tapen er merket med %s."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Sett inn tapen med volumnavn %s\n"
" i tapeenhet %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Tape"
msgstr "Gjenopprett fra tape"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "Ikke det riktige CD-navnet. CD'en er merket med %s."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Sett inn CD-en med navnet %s\n"
" i CD-stasjonen under monteringspunktet /mnt/cdrom"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From CD"
msgstr "Gjenopprett fra CD"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files not found at %s."
msgstr "Sikkerhetskopifiler ikke funnet p� %s."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Change\n"
"Restore Path"
msgstr ""
"Endre\n"
"gjenopprettelsesfilbane"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Gjenopprett valge\n"
"filer"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Gjenopprett valgte\n"
"katalogentr�"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remove user directories before restore."
msgstr "Fjern brukerkataloger f�r gjenoppretting."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Ta ny sikkerhetskopi f�r gjenoppretting (bare for inkrementelle "
"sikkerhetskopier.)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "select path to restore (instead of /)"
msgstr "velg filbane til gjenoppretting (i stedet for /)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Other"
msgstr "Gjenopprett andre"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Users"
msgstr "Gjenopprett brukere"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore system"
msgstr "Gjenopprett systemet"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
msgstr "Andre media"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
msgstr "Velg et annet media til � gjenopprette fra"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the directory where backups are stored"
msgstr "Vennligst skriv inn katalogen hvor sikkerhetskopier blir lagret"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore from Hard Disk."
msgstr "Gjenopprett fra harddisk"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use quota for backup files."
msgstr "Brukerquota for sikkerhetskopifiler."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""
"Vennligst spesifser maksimum st�rrelse\n"
" tillatt for Drakbackup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the directory to save:"
msgstr "Vennligst spesifiser katalogen til � lagre i:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Hard Disk to backup"
msgstr "Bruk harddisk til � ta sikkerhetskopi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "please choose the date to restore"
msgstr "vennligst velg datoen til � gjenopprette fra"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup the system files before:"
msgstr "Ta sikkerhetskopi av systemfiler f�r:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Brukerliste til � gjenopprette (bare den siste datoen per bruker er viktig)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "OK to restore the other files."
msgstr "OK til � gjenopprette andre filer."

#: ../../standalone/drakbackup:1
#, c-format
msgid "         Restore Configuration       "
msgstr "         Gjenopprett konfigurasjon       "

#: ../../standalone/drakbackup:1
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Gjenopprettet vellykket fra %s       "

#: ../../standalone/drakbackup:1
#, c-format
msgid "          All of your selected data have been          "
msgstr "          Alle dine valgte data har blitt          "

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files are corrupted"
msgstr "Sikkerhetskopier er korrupte"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Vennligst velg bort eller fjern den for neste gang."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Liste over korruptert data:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Liste over data for gjenoppretting:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Ingen konfigurasjon, vennligst klikk Veiviser og Avansert.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Nettverk med webdav.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Nettverk med rsync.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Nettverk med SSH.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Nettverk med FTP.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Tape \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-CDROM.\n"
msgstr "\t-CD-ROM.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Harddisk.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""
"\n"
"- Daemon (%s) inkluderer:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tSikkerhetskopier bruker tar og gzip\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tSikkerhetskopier bruker tar og bzip2\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tIkke inkluder systemfiler\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Valg:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t brukernavn: %s\n"
"\t\t p� filbane: %s \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Lagre via %s p� vert: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tSlett=%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Lagre til Tape p� enhet: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid " (multi-session)"
msgstr " (multisesjon)"

#: ../../standalone/drakbackup:1
#, c-format
msgid " on device: %s"
msgstr " p� enhet: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "RW"
msgstr "RW"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Brenn til CD"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Slett harddisk tarfiler etter sikkerhetskopiering.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Lagre til harddisk i filbane: %s\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Andre filer:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Brukerfiler:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Systemfiler:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Sikkerhetskopikilder: \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select user manually"
msgstr "Velg bruker manuelt"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Users"
msgstr "Sikkerhetskopier brukere"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system"
msgstr "Sikkerhetskopi system"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose what you want to backup"
msgstr "Vennligst velg hva du �nsker � sikkerhetskopiere"

#: ../../standalone/drakbackup:1
#, c-format
msgid "on Tape Device"
msgstr "p� Tapeenhet"

#: ../../standalone/drakbackup:1
#, c-format
msgid "on CDROM"
msgstr "p� CDROM"

#: ../../standalone/drakbackup:1
#, c-format
msgid "across Network"
msgstr "over nettverk"

#: ../../standalone/drakbackup:1
#, c-format
msgid "on Hard Drive"
msgstr "p� harddisk"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose where you want to backup"
msgstr "Vennligst velg hvor du vil ta sikkerhetskopi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "More Options"
msgstr "Flere valg"

#: ../../standalone/drakbackup:1
#, c-format
msgid "When"
msgstr "N�r"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Where"
msgstr "Hvor"

#: ../../standalone/drakbackup:1
#, c-format
msgid "What"
msgstr "Hva"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "Slett harddisk tarfiler etter sikkerhetskopiering til andre medium"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Send epostrapport etter hver sikkerhetskopiering til:"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' medias also use the hard drive."
msgstr ""
"V�r sikker p� at cron daemonen er inkluder i dine tjenester. \n"
"\n"
"Merk at alle n�v�rende 'nett' medium ogs� bruker harddisk."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the\n"
"media for backup."
msgstr ""
"Vennligst velg\n"
"medium for sikkerhetskopiering."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr "Vennligst velg tidsinterval +n mellom hver sikkerhetskopiering"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use daemon"
msgstr "Bruk daemon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "monthly"
msgstr "m�nedlig"

#: ../../standalone/drakbackup:1
#, c-format
msgid "weekly"
msgstr "ukentlig"

#: ../../standalone/drakbackup:1
#, c-format
msgid "daily"
msgstr "daglig"

#: ../../standalone/drakbackup:1
#, c-format
msgid "hourly"
msgstr "hver time"

#: ../../standalone/drakbackup:1
#, c-format
msgid "HardDrive / NFS"
msgstr "harddisk / NFS"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CDROM / DVDROM"
msgstr "CDROM / DVDROM"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the directory to save to:"
msgstr "Vennligst velg katalogen for lagring:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you want to eject your tape after the backup."
msgstr "Vennligst sjekk om du vil l�se ut tape etter sikkerhetskopiering."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you want to erase your tape before the backup."
msgstr "Vennligst sjekk om du vil slette tapen din f�r sikkerhetskopiering."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you want to use the non-rewinding device."
msgstr "Vennligst sjekk om du vil bruke en enhet som ikke kan spoles tilbake."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the device name to use for backup"
msgstr "Vennligst spesifser enhetsnavn du vil bruke for sikkerhetskopiering"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tape to backup"
msgstr "Bruk tape til sikkerhetskopiering"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD device defined!"
msgstr "Ingen CD-enhet definert!"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"Vennligst spesifiser din CD-brenners enhetsnavn\n"
" feks: 0,1,0"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you are using a DVDRAM device"
msgstr "Vennligst sjekk om du bruker en DVDRAM-enhet"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you are using a DVDR device"
msgstr "Vennligst sjekk om du bruker en DVDR-enhet"

#: ../../standalone/drakbackup:1
#, c-format
msgid " Erase Now "
msgstr " Slett n� "

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you want to erase your RW media (1st Session)"
msgstr "Vennligst sjekk om du vil slette ditt RW-medium (f�rste sesjon)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check if you are using CDRW media"
msgstr "Vennligst sjekk om du bruker et CDRW-medium"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check for multisession CD"
msgstr "Vennlligst sjekk etter multisesjons CD"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose your CD/DVD media size (Mb)"
msgstr "Velg ditt CD/DVD mediumst�rrelse(Mb)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please choose your CD/DVD device\n"
"(Press Enter to propogate settings to other fields.\n"
"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
"Vennligst velg din CD/DVD-enhet\n"
"(Trykk Enter for � videref�re oppsett til andre felt.\n"
"Dette feltet er ikke n�dvendig, bare et verkt�y for � fylle inn skjemaet.)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use CD/DVDROM to backup"
msgstr "Bruk CD/DVDROM for sikkerhetskopiering"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr "Trenger vertsnavn, brukernavn og passord!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remember this password"
msgstr "Husk dette passordet"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter your password"
msgstr "Vennligst skriv inn ditt passord"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter your login"
msgstr "Vennligst skriv inn ditt login"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Please enter the directory (or module) to\n"
" put the backup on this host."
msgstr ""
"Vennligst spesifiser katalog (eller modul) for\n"
" � legge sikkerhetskopien p� denne verten."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please enter the host name or IP."
msgstr "Vennligst spesifiser vertsnavn eller IP."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Other (not drakbackup)\n"
"keys in place already"
msgstr ""
"Andre (ikke drakbackup)\n"
"n�kler p� plass allerede"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"  Transfer  \n"
"Now"
msgstr ""
"  Overf�r  \n"
"n�"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Create/Transfer\n"
"backup keys for SSH"
msgstr ""
"Lag/overf�r\n"
"sikkerhetsn�kler for SSH"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Expect for SSH"
msgstr "Bruk Expect for SSH"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Net Method:"
msgstr "Nettmetode:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use network connection to backup"
msgstr "Bruk nettverkstilkobling til sikkerhetskopiering"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Users"
msgstr "Brukere"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Windows (FAT32)"
msgstr "Windows (FAT32)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr ""
"Bruk inkrementelle sikkerhetskopier  (ikke bytt ut gamle sikkerhetskopier)"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Remove Selected"
msgstr "Fjern valgte"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include the browser cache"
msgstr "Ikke inkluder utforsker-hurtigminne"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Vennligst sjekk alle brukere du vil inkludere i din sikkerhetskopi."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""
"Med dette valget kan du gjenopprette hvilken som helst versjon\n"
" av din /etc katalog"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Ikke inkluder kritiske filer (passwd, group, fstab)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use incremental backup  (do not replace old backups)"
msgstr ""
"Bruk inkrementale sikkerhetskopier (ikke bytt ut gamle sikkerhetskopier)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "SIkkerhetskopier dine systemfiler. (/etc katalog)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Disse valgene kan ta sikkerhetskopi og gjenopprette alle filene i din /etc "
"katalog.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Vennligst sjekk alle opsjonene du trenger.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select the files or directories and click on 'Add'"
msgstr "Velg filene eller katalogene og klikk 'Legg til'"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
msgstr "Filvalg"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create catalog!"
msgstr "Kan ikke lage katalog!"

#: ../../standalone/drakbackup:1
#, c-format
msgid " Error while sending mail. \n"
msgstr "Feil under sending av post. \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktiviteter via tape:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktiviteter via CD:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup aktiviteter via %s:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" FTP tilkoblingsproblemer: Det var ikke mulig � sende dine sikkerhetskopier "
"via FTP.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""
"filliste sendt via FTP: %s\n"
" "

#: ../../standalone/drakbackup:1
#, c-format
msgid "No changes to backup!"
msgstr "Ingen forandringer til sikkerhetskopi!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
msgstr "Harddisk sikkerhetskopifiler..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Other files..."
msgstr "Sikkerhetskopier andre filer..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Harddisk sikkerhetskopieringprogress..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup User files..."
msgstr "Sikkerhetskopier brukerfiler..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files..."
msgstr "Sikkerhetskopier systemfiler..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "No tape in %s!"
msgstr "Ingen tape i %s!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission problem accessing CD."
msgstr "Rettighetsproblemer ved tilgang til CD."

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Det kan ta en stund � slette dette mediumet."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not erasable media!"
msgstr "Ikke slettbart medium!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Ser ikke ut til � v�re ett medimu som kan skrives til!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CDR/DVDR in drive!"
msgstr "Ingen CDR/DVDR i stasjonen!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV transfer failed!"
msgstr "WebDAV overf�ring gikk feil!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "WebDAV fjernplass allerede synkronisert!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Total progess"
msgstr "Total framgang"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Overf�ring vellykket\n"
"Du vil kanskje �nske � sjekke om du kan logge inn til serveren med:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"uten � bli spurt etter passord."

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s not responding"
msgstr "%s svarer ikke"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't find %s on %s"
msgstr "Klarer ikke � finne %s p� %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Overf�ring %s til %s nektet"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
msgstr "Feil passord p� %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Inget passordsp�rsm�l p� %s p� port %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr "FEIL: Kan ikke skape %s."

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Det kan ta en tid � generere disse n�klene."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s eksisterer, slett?\n"
"\n"
"Advarsel: Hvis du allerede har gjort denne prosessen m� du kanskje\n"
" slette entr�en fra authorized_keys p� denne serveren."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    DrakBackup rapporter detaljer\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""
"\n"
"                      DrakBackup Daemon Rapport\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""
"\n"
"                      DrakBackup Rapport \n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "INFO"
msgstr "INFO"

#: ../../standalone/drakbackup:1
#, c-format
msgid "FATAL"
msgstr "FATALT"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WARNING"
msgstr "ADVARSEL"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Cron not available yet as non-root"
msgstr "Cron er ikke tilgjengelig enn� som ikke-root"

#: ../../standalone/drakboot:1
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Installasjon av %s mislykket. F�lgende feil oppsto:"

#: ../../standalone/drakboot:1
#, c-format
msgid "No, I don't want autologin"
msgstr "Nei, jeg vil ikke ha autologin"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)"

#: ../../standalone/drakboot:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Start W-Windowsystemet ved oppstart"

#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
msgstr "Systemmodus"

#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
msgstr "Bootsplash"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo screen"
msgstr "Lilo skjerm"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"Velg tema for\n"
"lilo og bootsplash,\n"
"du kan velge\n"
"de separat"

#: ../../standalone/drakboot:1
#, c-format
msgid "Themes"
msgstr "Teamer"

#: ../../standalone/drakboot:1
#, c-format
msgid "Splash selection"
msgstr "Splash valg"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Du bruker for �yeblikket %s som oppstartsh�ndterer.\n"
"Klikk p� Konfigurer for � starte oppsett-hjelperen."

#: ../../standalone/drakboot:1
#, c-format
msgid "LiLo and Bootsplash themes installation successfull"
msgstr "LiLo og Bootsplash temaer installert suksessfullt"

#: ../../standalone/drakboot:1
#, c-format
msgid "Theme installation failed!"
msgstr "Tema installasjon mislykket!"

#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "Notis"

#: ../../standalone/drakboot:1
#, c-format
msgid "Relaunch 'lilo'"
msgstr "Start 'lilo' p� nytt"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"Kan ikke starte LiLo p� nytt!\n"
"Start \"lilo\" som root i kommandolinjen for � fullf�re LiLo tema "
"installasjon."

#: ../../standalone/drakboot:1
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr "Lag initrd 'mkinitrd -f /boot/initrd-%s.img %s'."

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "Kan ikke starte mkinitrd -f /boot/initrd-%s.img %s."

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"Kan ikke skrive /etc/sysconfig/bootsplash\n"
"Fil ikke funnet."

#: ../../standalone/drakboot:1
#, c-format
msgid "Write %s"
msgstr "Skriv %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "Kan ikke skrive /etc/sysconfig/bootsplash."

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
msgstr "Lilo beskjed ikke funnet"

#: ../../standalone/drakboot:1
#, c-format
msgid "Copy %s to %s"
msgstr "Kopier %s til %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Backup %s to %s.old"
msgstr "Backup %s til %s.old"

#: ../../standalone/drakboot:1
#, c-format
msgid "Create new theme"
msgstr "Opprett nytt tema"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Vis tema\n"
"under konsoll"

#: ../../standalone/drakboot:1
#, c-format
msgid "Install themes"
msgstr "Installer temaer"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo/grub mode"
msgstr "Lilo/grub modus"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yaboot mode"
msgstr "Yaboot modus"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/Fil/_Avslutt"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_File"
msgstr "/_Fil"

#: ../../standalone/drakboot:1
#, c-format
msgid "Boot Style Configuration"
msgstr "Oppstartsstilkonfigurasjon"

#: ../../standalone/drakbug:1
#, c-format
msgid "No browser available! Please install one"
msgstr "Ingen utforsker tilgjengelig! Vennligst installer en"

#: ../../standalone/drakbug:1
#, c-format
msgid "connecting to Bugzilla wizard ..."
msgstr "Kobler til Bugzilla veiviser ..."

#: ../../standalone/drakbug:1
#, c-format
msgid "Package not installed"
msgstr "Pakke ikke installert"

#: ../../standalone/drakbug:1
#, c-format
msgid "Not installed"
msgstr "Ikke installert"

#: ../../standalone/drakbug:1
#, c-format
msgid "Standalone Tools"
msgstr "Verkt�y som fungerer alene"

#: ../../standalone/drakbug:1
#, c-format
msgid "Report"
msgstr "Rapporter"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""
"\n"
"\n"
"For � sende en bugrapport, klikk p� knappen rapport.\n"
"Dette vil �pne  et nettleservindu p� https://drakbug.mandrakesoft.com\n"
" hvor du vil finne ett skjema for utfylling. Informasjonen ovenfor vil bli "
"bli \n"
"overf�rt til den serveren\n"
"\n"

#: ../../standalone/drakbug:1
#, c-format
msgid "Release: "
msgstr "Utgivelse: "

#: ../../standalone/drakbug:1
#, c-format
msgid "Kernel:"
msgstr "Kjerne:"

#: ../../standalone/drakbug:1
#, c-format
msgid "Package: "
msgstr "Pakke:"

#: ../../standalone/drakbug:1
#, c-format
msgid "Application:"
msgstr "Applikasjon:"

#: ../../standalone/drakbug:1
#, c-format
msgid "Configuration Wizards"
msgstr "Konfigurasjonsveivisere"

#: ../../standalone/drakbug:1
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Windows Migration tool"
msgstr "Windows migreringsverkt�y"

#: ../../standalone/drakbug:1
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: ../../standalone/drakbug:1
#, c-format
msgid "Software Manager"
msgstr "Programvareh�ndterer"

#: ../../standalone/drakbug:1
#, c-format
msgid "Remote Control"
msgstr "Fjernkontroll"

#: ../../standalone/drakbug:1
#, c-format
msgid "Msec"
msgstr "Msec"

#: ../../standalone/drakbug:1
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: ../../standalone/drakbug:1
#, c-format
msgid "Synchronization tool"
msgstr "Synkroniseringsverkt�y"

#: ../../standalone/drakbug:1
#, c-format
msgid "First Time Wizard"
msgstr "Veiviseren for f�rste kj�ring"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Control Center"
msgstr "Mandrake kontrollpanel"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Mandrake bugrapporterings verkt�y"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "Parametere"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet Connection Configuration"
msgstr "Internett tilkobling konfigurasjon"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP Client"
msgstr "DHCP-klient"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Ethernet Card"
msgstr "Ethernettkort"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connection type: "
msgstr "Oppkoblingstype:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet connection configuration"
msgstr "Internett tilkobling konfigurasjon"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have an Internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Du har ingen internett-tilkobling.\n"
"Opprett en f�rst ved � klikke p� 'Konfigurer'"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""
"Dette grensesnittet har ikke blitt konfigurert enn�.\n"
"Start konfigurasjonsveiviseren i hovedvinduet"

#: ../../standalone/drakconnect:1
#, c-format
msgid "activate now"
msgstr "aktiver n�"

#: ../../standalone/drakconnect:1
#, c-format
msgid "deactivate now"
msgstr "deaktiver n�"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP client"
msgstr "DHCP-klient"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Started on boot"
msgstr "Startet ved oppstart"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Boot Protocol"
msgstr "Oppstartsprotokoll"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN Configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Du har ingen konfigurerte grensesnitt.\n"
"Konfigurer disse f�rst ved � klikke p� 'Konfigurer'"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Connect..."
msgstr "Koble til..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Disconnect..."
msgstr "Koble fra..."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Not connected"
msgstr "Ikke tilkoblet"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connected"
msgstr "Tilkoblet"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""
"Advarsel, en annen internettoppkobling har blitt oppdaget, bruker kanskje "
"ditt nettverk"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface:"
msgstr "Grensesnitt:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Apply"
msgstr "Bruk"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Click here to launch the wizard ->"
msgstr "Klikk her for � starte veiviseren ->"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Wizard..."
msgstr "Wizard..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Status:"
msgstr "Status:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Type:"
msgstr "Type:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet access"
msgstr "Internett-tilgang"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Hostname: "
msgstr "Vertsnavn: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
msgstr "Konfigurer lokalt nettverk"

#: ../../standalone/drakconnect:1
#, c-format
msgid "State"
msgstr "Status"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Driver"
msgstr "Driver"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Protocol"
msgstr "Protokoll"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface"
msgstr "rensesnitt"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Internet Access..."
msgstr "Konfigurer internetttilgang...."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Wait please"
msgstr "Vennligst vent"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Navn p� profilen som skal opprettes (den nye profilen opprettese som en av "
"kopi av den gjeldende)"

#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr "Ny profil...."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile to delete:"
msgstr "Profil som skal slettes:"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Del profile..."
msgstr "Slett profil..."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Nettverkskonfigurasjon (%d adaptere"

#: ../../standalone/drakedm:1
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"X11 Innloggingsh�ndterer tillater deg � grafisk logge\n"
"inn p� ditt system med X Window-systemet kj�rende og st�tter kj�ring\n"
"av forskjellige X-sesjoner p� din lokale maskin p� en gang."

#: ../../standalone/drakedm:1
#, c-format
msgid "Choosing a display manager"
msgstr "Velg en innloggingsh�ndterer(DM)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"Unable to properly close mkbootdisk: \n"
" %s \n"
" %s"
msgstr ""
"Kan ikke stenge mkbootdisk skikkelig:\n"
"%s \n"
"%s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Unable to fork: %s"
msgstr "Kan ikke dele %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Det er ikke noe media i %s eller s� er det skrivebeskytta.\n"
"Vennligst sett inn ett."

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "V�r sikker p� at det er media i %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Build the disk"
msgstr "Opprett disken"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Output"
msgstr "Utdata"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
msgstr "Fjern en modul"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Add a module"
msgstr "Legg til en modul"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit scsi modules"
msgstr "utelat scsi moduler"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "if needed"
msgstr "hvis det beh�ves"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
msgstr "utelat raid moduler"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "force"
msgstr "tving"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrd valgfrie argumenter"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Area"
msgstr "Ekspert omr�de"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "kernel version"
msgstr "kernel versjon"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "default"
msgstr "standard"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "General"
msgstr "Generelt"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "boot disk creation"
msgstr "Lage oppstartsdiskett(er)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "drakfloppy"
msgstr "drakoppstartsdiskett"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Size"
msgstr "St�rrelse"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Module name"
msgstr "Modulnavn"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
msgstr "Etter installering"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove fonts on your system"
msgstr "Fjern skrifttyper p� systemet ditt"

#: ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
msgstr "Initielle tester"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Install"
msgstr "Etter installasjon"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install & convert Fonts"
msgstr "Installer og konverter skrifttyper"

#: ../../standalone/drakfont:1
#, c-format
msgid "Copy fonts on your system"
msgstr "Kopier skrifttyper p� ditt system"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove List"
msgstr "Fjern liste"

#: ../../standalone/drakfont:1
#, c-format
msgid "Selected All"
msgstr "Valgte alle"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselected All"
msgstr "Valgte vekk alle"

#: ../../standalone/drakfont:1
#, c-format
msgid "here if no."
msgstr "her hvis nei."

#: ../../standalone/drakfont:1
#, c-format
msgid "click here if you are sure."
msgstr "klikk her hvis du er sikker."

#: ../../standalone/drakfont:1
#, c-format
msgid "Install List"
msgstr "Installeringsliste"

#: ../../standalone/drakfont:1
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Velg skrifttypefil eller katalog og klikk 'Legg til'"

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"F�r du installerer noen skrifttyper, v�r sikker p� at du har rett til � "
"bruke og installere dem p� ditt system.\n"
"\n"
"-Du kan installere skrifttypene p� den vanlige m�ten. I noen sjeldne "
"tilfeller kan herpede skrifttyper f� din X-tjener til � henge."

#: ../../standalone/drakfont:1
#, c-format
msgid "Generic Printers"
msgstr "Generelle skrivere"

#: ../../standalone/drakfont:1
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: ../../standalone/drakfont:1
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: ../../standalone/drakfont:1
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Velg applikasjonene som vil s�tte skrifttypene:"

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien (original version)\n"
"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""
"\n"
" Copyright (C) 2001-2002 ved MandrakeSoft \n"
"\tDUPONT Sebastien (original version)\n"
"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
"\n"
" Dette programmet er fri programvare; distribuerer De det videre og/eller\n"
" modifiserer det under termene av GNU General Public License som publisert\n"
" av Free Software Foundation; enten versjon 2, eller (etter eget "
"alternativ)\n"
"hvilk som helst senere versjon.\n"
"\n"
" Dette programet distribueres i h�pet om at det vil v�re nyttig,\n"
" men UTEN NOEN GARANTI; uten selv den antydde garantien av\n"
" VIDERESALG eller PASSENDES FOR ET SPESIELT FORM�L. Se\n"
" GNU General Public License'n for mere detaljer.\n"
"\n"
" Du burde ha mottat en kopi av GNU General Public License\n"
" sammen med dette programmet; om ikke, skriv til Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Takk til:\n"
"    -  pfm2afm:   \n"
"\t av Ken Borgendale:\n"
"\t    Konvertert en Windows .pfm  fil til en .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t av James Macnicol: \n"
"\t    type1inst genererer filer skrifttype.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  av Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Konverter ttf skrifttypefiler til afm og pfb skrifttyper\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "About"
msgstr "Om"

#: ../../standalone/drakfont:1
#, c-format
msgid "Font List"
msgstr "Skrifttype liste"

#: ../../standalone/drakfont:1
#, c-format
msgid "Advanced Options"
msgstr "Avanserte valg"

#: ../../standalone/drakfont:1
#, c-format
msgid "Uninstall Fonts"
msgstr "Avinstaller skrifttyper"

#: ../../standalone/drakfont:1
#, c-format
msgid "Get Windows Fonts"
msgstr "F� tak i Windows skrifttyper"

#: ../../standalone/drakfont:1
#, c-format
msgid "Import Fonts"
msgstr "Importer skrifttyper"

#: ../../standalone/drakfont:1
#, c-format
msgid "done"
msgstr "ferdig"

#: ../../standalone/drakfont:1
#, c-format
msgid "xfs restart"
msgstr "xfs omstart"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Fonts Files"
msgstr "Undertrykk skrifttypefiler"

#: ../../standalone/drakfont:1
#, c-format
msgid "Restart XFS"
msgstr "Restart XFS"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
msgstr "Undertrykk midlertidige filer"

#: ../../standalone/drakfont:1
#, c-format
msgid "type1inst building"
msgstr "type1inst bygger"

#: ../../standalone/drakfont:1
#, c-format
msgid "pfm fonts conversion"
msgstr "pfm skrifttyper konvertering"

#: ../../standalone/drakfont:1
#, c-format
msgid "ttf fonts conversion"
msgstr "ttf skrifttype konvertering"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
msgstr "Ghostscript referering"

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts conversion"
msgstr "Skrifttype konvertering"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type install done"
msgstr "True Type installasjon ferdig"

#: ../../standalone/drakfont:1
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "vennligst vent mens ttmkfdir..."

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type fonts installation"
msgstr "True Type skrifttyper-installasjon"

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
msgstr "Skrifttype-kopiering"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search for fonts in installed list"
msgstr "S�k etter skrifttyper i listen over installerte"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font.\n"
msgstr "kunne ikke finne noen skrifttyper.\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Reselect correct fonts"
msgstr "Velg korrekte skrifttyper p� nytt"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font in your mounted partitions"
msgstr "kunne ikke finne noen skrifttyper p� dine monterte partisjoner"

#: ../../standalone/drakfont:1
#, c-format
msgid "no fonts found"
msgstr "ingen skrifttyper funnet"

#: ../../standalone/drakfont:1
#, c-format
msgid "parse all fonts"
msgstr "analyser alle skrifttyper"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselect fonts installed"
msgstr "Velg vekk skrifttyper som er installert"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search installed fonts"
msgstr "S�k igjennom installerte skrifttyper"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Velkommen til verkt�yet for deling av Internett tilkobling!\n"
"\n"
"%s\n"
"\n"
"Klikk p� Konfigurer for � starte oppsett-hjelperen."

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing configuration"
msgstr "Internett deling av tilkobling konfigurasjon"

#: ../../standalone/drakgw:1
#, c-format
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Deling av Internett tilkobling har aldri blitt konfigurert."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, and it's currently enabled."
msgstr "Oppsett har allerede blitt gjort, og er for �yeblikket sl�tt p�."

#: ../../standalone/drakgw:1
#, c-format
msgid "The setup has already been done, but it's currently disabled."
msgstr "Oppsett har allerede blitt gjort, men er for �yeblikket sl�tt av."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Alt har blitt konfigurert.\n"
"Du kan n� dele Internett-tilkobling med andre maskiner p� ditt lokale "
"nettverk ved � bruke automatisk nettverkskonfigurasjon (DHCP)."

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
msgstr "Problemer ved installering av pakke %s"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurerer script, installerer programvare, starter tjenere..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring..."
msgstr "Konfigurerer..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n"

#: ../../standalone/drakgw:1
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "Det lokale nettverket sluttet ikke med `.0', hopper ut."

#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Omkonfigurer grensesnitt og DHCP-tjener"

#: ../../standalone/drakgw:1
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Maksimum leieavtale (i sekunder)"

#: ../../standalone/drakgw:1
#, c-format
msgid "The default lease (in seconds)"
msgstr "Standard leieavtal (i sekunder)"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
msgstr "DHCP slutt rekken"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP start range"
msgstr "DHCP start rekken"

#: ../../standalone/drakgw:1
#, c-format
msgid "The internal domain name"
msgstr "Det internasjonale domenenavnet"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DNS Server IP"
msgstr "Navntjener tjener IP'en"

#: ../../standalone/drakgw:1
#, c-format
msgid "(This) DHCP Server IP"
msgstr "(Denne) DHCP tjener IP'en"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""
"DHCP-tjener konfigurasjon.\n"
"\n"
"Her kan du velge forskjellige valg for DHCP-tjener konfigurasjonen.\n"
"Hvis du ikke vet hva en opsjon gj�r, bare la den v�re som den er.\n"
"\n"

#: ../../standalone/drakgw:1
#, c-format
msgid "Local Network adress"
msgstr "Lokal nettverksadresse"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Jeg kan beholde den gjeldende konfigurasjonen og anta at du allerede har "
"satt opp DHCP-tjener; i det tilfellet s� sjekk at jeg leser av riktig "
"nettverket som du\n"
"bruker som ditt lokale; jeg vil ikke omkonfigurere det og jeg vil ikke r�re "
"ditt DHCP-tjener konfigurasjon.\n"
"\n"
"Standard DNS-serveren som blir satt opp er den hurtiglagrende navneserveren "
"konfigurerert for din brannmur. Du kan feks. bytte den med din egen ISP sin "
"DNS IP.\n"
"\t\t      \n"
"Ellers s� kan jeg omkonfigurere ditt grensesnitt og (om)konfigurere en DHCP-"
"tjenerfor deg.\n"
"\n"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Gjeldende konfigurasjon av `%s':\n"
"\n"
"Nettverk: %s\n"
"IP-adresse: %s\n"
"IP-attributer: %s\n"
"Driver: %s"

#: ../../standalone/drakgw:1
#, c-format
msgid "Current interface configuration"
msgstr "Gjeldende grensesnittkonfigurasjon"

#: ../../standalone/drakgw:1
#, c-format
msgid "Show current interface configuration"
msgstr "Vis gjeldende grensesnittkonfigurasjon"

#: ../../standalone/drakgw:1
#, c-format
msgid "No (experts only)"
msgstr "Nei (bare eksperter)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
msgstr "Automatisk omkonfigurasjon"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Advarsel, nettverkadapteren (%s) er allerede konfigurert.\n"
"\n"
"Vil du rekonfigurere den automatisk?\n"
"\n"
"Du kan gj�re manuelt, men da m� du vite hva du driver med."

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface already configured"
msgstr "Nettverksgrensesnitt allerede konfigurert"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale "
"nettverk (LAN)."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Det er bare ett konfigurert nettverksadapter i systemet ditt:\n"
"\n"
"%s\n"
"\n"
"Jeg er i ferd med � sette opp ditt lokale nettverk (LAN) med dette adapteret."

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface"
msgstr "Nettverksgrensesnitt"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. "
"Vennligst kj�r verkt�yet for maskinvarekonfigurasjon."

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "No network adapter on your system!"
msgstr "Ikke noe nettverksadapter i systemet ditt!"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s"
msgstr "Grensesnitt %s"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Grensesnitt %s (bruker modul %s)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Net Device"
msgstr "Nett-enhet"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Vennligst skriv inn navnet p� grensesnittet som er koblet til internett.\n"
"\n"
"Eksempler:\n"
"\t\tppp+ for modem eller DSL-tilkoblinger, \n"
"\t\teth0 eller eth1 for kabeltilkobling, \n"
"\t\tippp+ for isdntilkobling.\n"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Du er i ferd med � konfigurere maskinen din til � dele dens Internett-"
"tilkobling.\n"
"Med denne finessen s� kan andre maskiner i nettverket ditt kunne bruke denne "
"maskinens Internett tilkobling.\n"
"\n"
"V�r sikker p� at du konfigurert ditt Nettverk/Internett-tilgang ved hjelp av "
"drakconnect f�r du g�r videre.\n"
"\n"
"Merk: du trenger en dedikert nettverksadapter for � sette opp et lokalt "
"nettverk (LAN)."

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing"
msgstr "Deling av Internett tilkobling"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Deling av Internett tilkobling er n� sl�tt p�."

#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
msgstr "Sl�r p� tjenere..."

#: ../../standalone/drakgw:1
#, c-format
msgid "dismiss"
msgstr "avvis"

#: ../../standalone/drakgw:1
#, c-format
msgid "reconfigure"
msgstr "Konfigurer p� nytt"

#: ../../standalone/drakgw:1
#, c-format
msgid "enable"
msgstr "sl� p�"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Oppsettet for deling av Internett tilkobling har allerede blitt gjort.\n"
"Dette er for �yeblikket deaktivert.\n"
"\n"
"Hva vil du gj�re?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Deling av Internett tilkobling er sl�tt av"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Deling av Internett tilkobling er sl�tt av"

#: ../../standalone/drakgw:1
#, c-format
msgid "Disabling servers..."
msgstr "Sl�r av tjenere..."

#: ../../standalone/drakgw:1
#, c-format
msgid "disable"
msgstr "sl� av"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
"Dette er for �yeblikket sl�tt p�.\n"
"\n"
"Hva vil du gj�re?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Deling av Internett tilkobling er sl�tt p�"

#: ../../standalone/drakgw:1
#, c-format
msgid "Sorry, we support only 2.4 kernels."
msgstr "Beklager, vi st�tter bare 2.4-kjerner."

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""
"Ingen nettlser er installert p� ditt system, du m� installere en om du vil "
"bruke hjelpesystemet"

#: ../../standalone/drakperm:1
#, c-format
msgid "Path"
msgstr "Filbane"

#: ../../standalone/drakperm:1
#, c-format
msgid "group :"
msgstr "gruppe :"

#: ../../standalone/drakperm:1
#, c-format
msgid "user :"
msgstr "bruker :"

#: ../../standalone/drakperm:1
#, c-format
msgid "Path selection"
msgstr "Filbane valg"

#: ../../standalone/drakperm:1
#, c-format
msgid "when checked, owner and group won't be changed"
msgstr "n�r sjekket, s� vil ikke eier og gruppe bli forandret"

#: ../../standalone/drakperm:1
#, c-format
msgid "Use group id for execution"
msgstr "Bruke gruppeid for utf�ring"

#: ../../standalone/drakperm:1
#, c-format
msgid "Use owner id for execution"
msgstr "Bruk eierid for utf�ring"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Brukt for katalog:\n"
" bare eiere av katalogen eller filen i denne katalogen kan slette den"

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: ../../standalone/drakperm:1
#, c-format
msgid "sticky-bit"
msgstr "sticky-bit"

#: ../../standalone/drakperm:1
#, c-format
msgid "Property"
msgstr "Eiendom"

#: ../../standalone/drakperm:1
#, c-format
msgid "Permissions"
msgstr "Rettigheter"

#: ../../standalone/drakperm:1
#, c-format
msgid "Current user"
msgstr "Gjeldende bruker"

#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
msgstr "utforsk"

#: ../../standalone/drakperm:1
#, c-format
msgid "Edit current rule"
msgstr "Rediger gjeldende regel"

#: ../../standalone/drakperm:1
#, c-format
msgid "edit"
msgstr "rediger"

#: ../../standalone/drakperm:1
#, c-format
msgid "Delete selected rule"
msgstr "Fjern vagte regel"

#: ../../standalone/drakperm:1
#, c-format
msgid "delete"
msgstr "slett"

#: ../../standalone/drakperm:1
#, c-format
msgid "Add a new rule at the end"
msgstr "Legg til ny regel p� slutten"

#: ../../standalone/drakperm:1
#, c-format
msgid "add a rule"
msgstr "legg til en regel"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule down one level"
msgstr "Velg valgte regel ned et niv�"

#: ../../standalone/drakperm:1
#, c-format
msgid "Down"
msgstr "Ned"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule up one level"
msgstr "Velg valgte regel opp et niv�"

#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
msgstr "Opp"

#: ../../standalone/drakperm:1
#, c-format
msgid "select perm file to see/edit"
msgstr "velg rettighetsfil for � se/redigere"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm brukes for � se filer for � fikse rettigheter, eiere, og grupper "
"via msec.\n"
"Du kan ogs� redigere dine egne regler som vil overskrive standardregler."

#: ../../standalone/drakperm:1
#, c-format
msgid "permissions"
msgstr "rettigheter"

#: ../../standalone/drakperm:1
#, c-format
msgid "group"
msgstr "gruppe"

#: ../../standalone/drakperm:1
#, c-format
msgid "user"
msgstr "bruker"

#: ../../standalone/drakperm:1
#, c-format
msgid "path"
msgstr "filbane"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Lokalisjon for auto_install.cfg fil"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"Vennligst vis hvor auto_install.cfg fila er lokalisert.\n"
"\n"
"La den v�re blanket ut om du ikke vil sette opp automatisk "
"installasjonsmodus.\n"
"\n"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Inget CD- eller DVD-image funnet, vennligst kopier over "
"installasjonsprogrammet og rpm filene."

#: ../../standalone/drakpxe:1
#, c-format
msgid "No image found"
msgstr "Inget image funnet"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation image directory"
msgstr "Installasjons-image katalog"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Vennligst vis hvor installasjons-imaget vil v�re tilgjengelige.\n"
"\n"
"Hvis du ikke har en eksisterende katalog, vennligst kopier over CD- eller "
"DVD-innholdet\n"
"\n"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
msgstr "DHCP slutt-ip"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP start ip"
msgstr "DHCP start-ip"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"DHCP-servern vil tillate andre maskine � boote ved hjelp av PXE i det gitte "
"adresseomr�det.\n"
"\n"
"Nettverksadressen %s brukerer nettmasken %s.\n"
"\n"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Grensesnitt %s (p� nettverk %s)"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
"Vennligst velg hvilken nettverksadapter du �nsker � bruke for dhcp-serveren."

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Du er i ferd med � konfigurere maskinen din til � installere en PXE-server "
"som DHCP-server\n"
"og en TFTP-server for � lage en installasjonsserver.\n"
"Med denne finessen s� kan andre maskiner p� ditt lokale nettverk bli "
"installerbare fra denne maskinen.\n"
"\n"
"V�r sikker p� at du har konfigurert din Nettverk/Internett-tilkobling ved "
"hjelp av drakconnect f�r du g�r videre.\n"
"\n"
"Merk: du trenger ett dedikert nettverkskort for � sette opp ett Lokalt "
"Nettverk(LAN)."

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation Server Configuration"
msgstr "Installasjons-server konfigurasjon"

#: ../../standalone/drakpxe:1
#, c-format
msgid "PXE Server Configuration"
msgstr "PXE-server konfigurasjon"

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security options..."
msgstr "Vennligst vent, setter sikkerhetsopsjoner..."

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security level..."
msgstr "Vennligst vent, setter sikkerhetsniv�..."

#: ../../standalone/draksec:1
#, c-format
msgid "Periodic Checks"
msgstr "Periodiske sjekker"

#: ../../standalone/draksec:1
#, c-format
msgid "System Options"
msgstr "Systemopsjoner"

#: ../../standalone/draksec:1
#, c-format
msgid "Network Options"
msgstr "Nettverksopsjoner"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"De f�lgende opsjonene kan bli satt for � skreddersy din egen\n"
"systemsikkerhet. Hvis du trenger en forklaring, se p� hjelpetipset.\n"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Administrator:"
msgstr "Sikkerhetsadministrator"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Alerts:"
msgstr "Sikkerhetvarsler:"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Level:"
msgstr "Sikkerhetsniv�:"

#: ../../standalone/draksec:1
#, c-format
msgid "(default value: %s)"
msgstr "(standard verdi: %s)"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"Standard: This is the standard security recommended for a computer that will "
"be used to connect\n"
"               to the Internet as a client.\n"
"\n"
"High:       There are already some restrictions, and more automatic checks "
"are run every night.\n"
"\n"
"Higher:    The security is now high enough to use the system as a server "
"which can accept\n"
"              connections from many clients. If your machine is only a "
"client on the Internet, you\n"
"           should choose a lower level.\n"
"\n"
"Paranoid:  This is similar to the previous level, but the system is entirely "
"closed and security\n"
"                features are at their maximum\n"
"\n"
"Security Administrator:\n"
"               If the 'Security Alerts' option is set, security alerts will "
"be sent to this user (username or\n"
"            email)"
msgstr ""
"Standard: Dette standdardsikkerhetsniv�et er anbefalt for maskiner som "
"vilbli brukt for � koble\n"
"               til internett som en klient.\n"
"\n"
"H�yt:       Det er allerede noen restriksjoner, og flere automatiske "
"sjekkerblir kj�rt hver natt.\n"
"\n"
"H�yere:    Sikkerheten er n� h�y nok for � kunne bruke systemet som en "
"serversom kan motta\n"
"              tilkoblinger fra mange klienter. Hvis maskinen bare er "
"enklient p� internett, s�\n"
"           du velge et lavere sikkerhetsniv�.\n"
"\n"
"Paranoid:  Dette er lignende det forrige niv�et, men systemet er "
"fulllstendig stengt og sikkerhetsfinessene\n"
"                er p� deres maksimale\n"
"\n"
"Sikkerhetsadministrator:\n"
"               Hvis 'Sikkerhetsadvarsler' opsjonen er satt, s� vil "
"sikkerhetsadvarsler bli sendt til denne brukeren (brukernavn eller\n"
"            epost)"

#: ../../standalone/draksound:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Merk: hvis du har et ISA PnP lydkort, s� m� du bruke sndconfig-programmet. "
"Bare skriv \"sndconfig\" i et konsoll."

#: ../../standalone/draksound:1
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Inget lydkort har blitt oppdaget p� din maskin. Vennligst sjekk at et\n"
"Linux-st�ttet lydkort er riktig installert.\n"
"\n"
"\n"
"Du kan bes�ke v�r maskinvaredatabase p�:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/draksound:1
#, c-format
msgid "No Sound Card detected!"
msgstr "Inget lydkort oppdaget!"

#: ../../standalone/draksplash:1
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "%s BootSplash (%s) forh�ndsvisning"

#: ../../standalone/draksplash:1
#, c-format
msgid "Generating preview ..."
msgstr "Genererer forh�ndsvisning ..."

#: ../../standalone/draksplash:1
#, c-format
msgid "You must choose an image file first!"
msgstr "Du m� velge en imagefil f�rst!"

#: ../../standalone/draksplash:1
#, c-format
msgid "ProgressBar color selection"
msgstr "Framgangsviser fargevalg"

#: ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "Dette temaet har ikke f�tt noen bootsplash i %s enn� !"

#: ../../standalone/draksplash:1
#, c-format
msgid "saving Bootsplash theme..."
msgstr "lagrer bootsplash-tema..."

#: ../../standalone/draksplash:1
#, c-format
msgid "choose image file"
msgstr "velg bildefil"

#: ../../standalone/draksplash:1
#, c-format
msgid "choose image"
msgstr "velg bildefil"

#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigurer bootsplash bilde"

#: ../../standalone/draksplash:1
#, c-format
msgid "Make kernel message quiet by default"
msgstr "Gj�r kjerne-meldinger stille som standard"

#: ../../standalone/draksplash:1
#, c-format
msgid "Display logo on Console"
msgstr "Vis logo p� konsolet"

#: ../../standalone/draksplash:1
#, c-format
msgid "Choose color"
msgstr "Velg farge"

#: ../../standalone/draksplash:1
#, c-format
msgid "Save theme"
msgstr "Lagre tema"

#: ../../standalone/draksplash:1
#, c-format
msgid "Preview"
msgstr "Forh�ndsvisning"

#: ../../standalone/draksplash:1
#, c-format
msgid "the color of the progress bar"
msgstr "fargen p� framgangsbaren"

#: ../../standalone/draksplash:1
#, c-format
msgid "the height of the progress bar"
msgstr "h�yden p� framgangsviseren"

#: ../../standalone/draksplash:1
#, c-format
msgid "the width of the progress bar"
msgstr "bredden p� framgangsviseren"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"framgangsbarens y-koordinat\n"
"i dens venstre �verste hj�rne"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"framgangsbarens x-koordinat\n"
"i dens venstre �verste hj�rne"

#: ../../standalone/draksplash:1
#, c-format
msgid "text box height"
msgstr "tekstboks h�yde"

#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
msgstr "tekstbredde"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"y-koordinat for tekst�-boks\n"
"i nummer av tegn"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""
"x-koordinat for tekst�-boks\n"
"i nummer av tegn"

#: ../../standalone/draksplash:1
#, c-format
msgid "Browse"
msgstr "Utforsk"

#: ../../standalone/draksplash:1
#, c-format
msgid "Theme name"
msgstr "Temanavn"

#: ../../standalone/draksplash:1
#, c-format
msgid "final resolution"
msgstr "endelige oppl�sning"

#: ../../standalone/draksplash:1
#, c-format
msgid "first step creation"
msgstr "f�rste stegs opprettelse"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"pakken 'ImageMagick' trengs for � kunne fullf�re konfigurasjonen.\n"
"Klikk \"Ok\" for � installere 'ImageMagick' eller klikk \"Avbryt\" for � "
"avslutte"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Inget TV-kort har blitt oppdaget p� din maskin. Vennligst sjekk at du\n"
"har et Linux-st�ttet Video/TV-kort riktig installert.\n"
"\n"
"\n"
"Du kan bes�ke v�r maskinvaredatabase p�:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/drakxtv:1
#, c-format
msgid "No TV Card detected!"
msgstr "Inget TV-kort oppdaget!"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "N� kan du kj�re xawtv (under X Windows!) !\n"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Have a nice day!"
msgstr "Ha en fin dag!"

#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
msgstr "XawTV er ikke installert!"

#: ../../standalone/drakxtv:1
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Det var en feil under s�king etter TV-kanaler"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels"
msgstr "S�ker etter tv-kanaler"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "S�k etter tv-kanaler underveis ..."

#: ../../standalone/drakxtv:1
#, c-format
msgid "Area:"
msgstr "Omr�de:"

#: ../../standalone/drakxtv:1
#, c-format
msgid "TV norm:"
msgstr "TV standard:"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Vennligst,\n"
"skriv inn din tv standard og land"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Australian Optus cable TV"
msgstr "Australsk Optus kabeltv"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Newzealand"
msgstr "Newzealand"

#: ../../standalone/drakxtv:1
#, c-format
msgid "France [SECAM]"
msgstr "Frankrike [SECAM]"

#: ../../standalone/drakxtv:1
#, c-format
msgid "East Europe"
msgstr "�st Europa"

#: ../../standalone/drakxtv:1
#, c-format
msgid "West Europe"
msgstr "Vest Europa"

#: ../../standalone/drakxtv:1
#, c-format
msgid "China (broadcast)"
msgstr "Kina (kringkastning)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (cable)"
msgstr "Japan (kabel)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (broadcast)"
msgstr "Japan (kringkastning)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Canada (cable)"
msgstr "Kanada (Quebec)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable-hrc)"
msgstr "USA (kabel-hrc)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
msgstr "USA (kabel)"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (broadcast)"
msgstr "USA (kringkastning)"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"XawTV isn't installed!\n"
"\n"
"\n"
"If you do have a TV card but DrakX has neither detected it (no bttv nor "
"saa7134\n"
"module in \"/etc/modules\") nor installed xawtv, please send the\n"
"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
"with subject \"undetected TV card\".\n"
"\n"
"\n"
"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
"XawTV er ikke installert!\n"
"\n"
"\n"
"Hvis du har et TV-kort, men DrakX aldri oppdaget det (ingen bttv eller\n"
"saa7134  modul i \"/etc/modules\") eller ikke isntallerte xawtv, vennligst\n"
" send resultatet av \"lspcidrak -v -f\" til \"install\\@mandrakesoft.com\"\n"
"med emnet \"undetected TV card\"(p� engelsk).\n"
"\n"
"\n"
"Du kan installere det ved � skrive \"urpmi xawtv\" som root, i et konsoll."

#: ../../standalone/harddrake2:1
#, c-format
msgid "primary"
msgstr "prim�r"

#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
msgstr "sekund�r"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "Klikk p� en enhet i det venstre treet for � vise dens informasjon her."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Unknown"
msgstr "Ukjent"

#: ../../standalone/harddrake2:1
#, c-format
msgid "unknown"
msgstr "ukjent"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Running \"%s\" ..."
msgstr "Kj�rer \"%s\" ..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Run config tool"
msgstr "Kj�r konfig verkt�y"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Configure module"
msgstr "Konfigurer modul"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information"
msgstr "Informasjon"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detected hardware"
msgstr "Oppdaget maskinvare"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake2 version "
msgstr "Harddrake2 versjon "

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
msgstr "oppdagelse p�g�r"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Author:"
msgstr "Utgiver:"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"Version:"
msgstr ""
"Dette er HardDrake, et Mandrake maskinvare konfigureringsverkt�y.\n"
"Versjon:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "About Harddrake"
msgstr "Om Harddrake"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_About..."
msgstr "/_Om..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Report Bug"
msgstr "/_Rapporter feil"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"N�r du har valg en enhet, s� kan du se informasjon om den i feltet i den "
"h�yre rammen (\"Informasjon\")"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Select a device !"
msgstr "Velg en enhet !"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Beskrivelse av feltene:\n"
"\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake help"
msgstr "Harddrake hjelp"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Fields description"
msgstr "/_Felt beskrivelser"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Help"
msgstr "/_Hjelp"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Quit"
msgstr "/_Avslutt"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _jazz drives"
msgstr "/Oppdag automatisk _jazz enheter"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _modems"
msgstr "/Oppdag automatisk _modemer"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _printers"
msgstr "/Oppdag automatisk _skrivere"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Options"
msgstr "/_Valg"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the processor"
msgstr "leverand�rnavnet til prosessoren"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the device"
msgstr "leverand�rnavnet til enheten"

#: ../../standalone/harddrake2:1
#, c-format
msgid "The type of bus on which the mouse is connected"
msgstr "Busstypen musen din er tilkoblet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Stepping of the cpu (sub model (generation) number)"
msgstr "Serie av prosessoren (undermodell (generasjon) nummer)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model stepping"
msgstr "Modellserie"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of the processor"
msgstr "leverand�rnavnet til prosessoren"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Processor ID"
msgstr "Prosessorid"

#: ../../standalone/harddrake2:1
#, c-format
msgid "network printer port"
msgstr "nettverksprinterport"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the name of the CPU"
msgstr "navnet p� prosessoren"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Name"
msgstr "Navn"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of buttons the mouse has"
msgstr "antall knapper som musen har"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Number of buttons"
msgstr "Antall knapper"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Official vendor name of the cpu"
msgstr "Leverand�rnavnet til prosessoren"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model name"
msgstr "Modellnavn"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "Generasjon av prosessoren (feks. 8 for PentiumIII, ...)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model"
msgstr "Modell"

#: ../../standalone/harddrake2:1
#, c-format
msgid "hard disk model"
msgstr "harddisk modell"

#: ../../standalone/harddrake2:1
#, c-format
msgid "class of hardware device"
msgstr "klasse av maskinvareenhet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Media class"
msgstr "Mediaklasse"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Sub generation of the cpu"
msgstr "Undergenerering av prosessoren"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
msgstr "Niv�"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Format of floppies supported by the drive"
msgstr "Diskettformater diskettstasjonen tar"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Floppy format"
msgstr "Diskettformat"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Noen av de tidligere i486DX-100-brikkene kan ikke returnere ordentlig "
"tilbake til operativt modues etter at \"halt\"-instruksjonen har blitt brukt."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Halt bug"
msgstr "Halt feil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
"Tidlige pentiumer var fulle av feil og fryste n�r man dekodet F00F bytekode"

#: ../../standalone/harddrake2:1
#, c-format
msgid "F00f bug"
msgstr "F00f feil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
"ja betyr at den matematiske tilleggsprosessoren har en unntaksvektor "
"tilkoblet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Om matteprosessoren har en avbruddsvektor"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "ja betyr at prosessoren har en matematisk tilleggprosessor"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Is FPU present"
msgstr "Er matteprosessor tilgjengelig"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Tidligere Inten Pentium brikker hadde en feil i matteprosessoren som gjorde "
"at man ikke oppn�dde den n�dvendige presisjonen n�r man gjorde \"Floating "
"point DIVision\" (FDIV)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Fdiv bug"
msgstr "Fdiv feil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "Prosessorflagg rapportert av kjernen"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Flags"
msgstr "Flagg"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "modulen til GNU/Linux kjernen som h�ndterer den enheten"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Module"
msgstr "Modul"

#: ../../standalone/harddrake2:1
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "nytt dynamisk enhetsnavn generert av incore kjerne devfs"

#: ../../standalone/harddrake2:1
#, c-format
msgid "New devfs device"
msgstr "Ny devfs enhet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "old static device name used in dev package"
msgstr "gammelt statisk enhetsnavn brukt i dev pakke"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Old device file"
msgstr "Gammel enhetfil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "This field describes the device"
msgstr "Dette feltet beskriver enheten"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"The CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"Prosessorklokkefrekvens i MHz (MegaHertz som kan bli (grovt) m�lt i antall "
"instruksjoner prosessoren klarer � utf�re per sekund)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Frequency (MHz)"
msgstr "Frekvens (MHz)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information level that can be obtained through the cpuid instruction"
msgstr "Informasjonsniv� kan bli anskaffet via prosessorid-instruksjonen"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid level"
msgstr "Prosessorid-niv�"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Family of the cpu (eg: 6 for i686 class)"
msgstr "Prosessorfamilie (feks. 6 for i686-klasse)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid family"
msgstr "Prosessorid-familie"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "Om denne prosessoren har Cyrix 6x86 kommafeil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Coma bug"
msgstr "Kommafeil"

#: ../../standalone/harddrake2:1
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "spesielle egenskaper for enheten (brenne mulighet og/eller DVD-st�tte)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Drive capacity"
msgstr "Diskkapasitet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Size of the (second level) cpu cache"
msgstr "St�rrelse p� andreniv� prosessor-hurtigminne"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cache size"
msgstr "Hurtigminnest�rrelse"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- pci enheter: dette gir PCI spor, enhet og funksjon til dette kortet\n"
"- eide enheter: enheten er enten en slave eller en master enhet\n"
"- scsi enheter: scsi buss og scsi enhet ids"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Location on the bus"
msgstr "Lokasjon p� bussen"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- PCI og USB enheter: dette oppgir leverand�r, enhet, underleverand�r og "
"underenhet PCI/USB ids"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus identification"
msgstr "Buss identifikasjon"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"The GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"GNU/Linux kjernen trenger � kj�re kalkulasjonsberegning under oppstart for � "
"initialisere en tidtaker. Dens resultat er lagret som \"bogomips\" som en "
"m�te for � \"m�le\" prosessorens ytelse."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: ../../standalone/harddrake2:1
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI kanal"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Channel"
msgstr "Kanal"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
"dette er den fysiske bussen som enheten er plugget til (f.eks. PCI, USB, ...)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus"
msgstr "Buss"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "listen over alternative drivere for dette lydkortet"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Alternative drivers"
msgstr "Alternative drivere"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "�nsker du at BackSpace skal returnere Delete i konsoll?"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Vennligst velg tastatur-oppsettet ditt."

#: ../../standalone/livedrake:1
#, c-format
msgid "Unable to start live upgrade !!!\n"
msgstr "Kan ikke starte oppgradering !!!\n"

#: ../../standalone/livedrake:1
#, c-format
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok n�r du er\n"
"ferdig. Hvis du ikke har denne, trykk Avbryt for � unng� oppgradering."

#: ../../standalone/livedrake:1
#, c-format
msgid "Change Cd-Rom"
msgstr "Bytt CD"

#: ../../standalone/localedrake:1
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "Endringen er gjort, men for � v�re effektivisert s� m� du logge ut"

#: ../../standalone/logdrake:1
#, c-format
msgid "Save as.."
msgstr "Lagre Som..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Please enter your email address below "
msgstr "Vennligst skriv inn epostadressen din nedenfor"

#: ../../standalone/logdrake:1
#, c-format
msgid "alert configuration"
msgstr "varsel-konfigurasjon"

#: ../../standalone/logdrake:1
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Du vil motta en advarsel hvis lasten er h�yere enn denne advarselen"

#: ../../standalone/logdrake:1
#, c-format
msgid "load setting"
msgstr "last inn oppsett"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""
"Du vil motta en advarsel hvis en av de valgte tjenestene ikke lenger kj�rer"

#: ../../standalone/logdrake:1
#, c-format
msgid "service setting"
msgstr "tjenesteoppsett"

#: ../../standalone/logdrake:1
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd-tjener"

#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
msgstr "Webmin-tjeneste"

#: ../../standalone/logdrake:1
#, c-format
msgid "SSH Server"
msgstr "SSH-tjener"

#: ../../standalone/logdrake:1
#, c-format
msgid "Samba Server"
msgstr "Samba-tjener"

#: ../../standalone/logdrake:1
#, c-format
msgid "Postfix Mail Server"
msgstr "Postfix posttjener"

#: ../../standalone/logdrake:1
#, c-format
msgid "Ftp Server"
msgstr "Ftp-server"

#: ../../standalone/logdrake:1
#, c-format
msgid "Domain Name Resolver"
msgstr "Domenenavnoppslagstjeneste"

#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Apache World Wide Web Tjener"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Velkommen til mail-konfigurasjonsverkt�yet.\n"
"\n"
"Her kan du sette opp varslingsystemet.\n"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert configuration"
msgstr "E-post varslingskonfigurasjon"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert"
msgstr "E-post varsel"

#: ../../standalone/logdrake:1
#, c-format
msgid "please wait, parsing file: %s"
msgstr "vennligst vent, gjennomg�r %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "Content of the file"
msgstr "Innholdet i filen"

#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
msgstr "Kalender"

#: ../../standalone/logdrake:1
#, c-format
msgid "Choose file"
msgstr "Velg fil"

#: ../../standalone/logdrake:1
#, c-format
msgid "but not matching"
msgstr "men ikke lik"

#: ../../standalone/logdrake:1
#, c-format
msgid "matching"
msgstr "lik"

#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Settings"
msgstr "Instillinger"

#: ../../standalone/logdrake:1
#, c-format
msgid "A tool to monitor your logs"
msgstr "Ett verkt�y for � sjekke loggene dine"

#: ../../standalone/logdrake:1
#, c-format
msgid "search"
msgstr "s�k"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mandrake Tools Explanation"
msgstr "Mandrakeverkt�y-forklaringer"

#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
msgstr "Syslog"

#: ../../standalone/logdrake:1
#, c-format
msgid "Messages"
msgstr "Meldinger"

#: ../../standalone/logdrake:1
#, c-format
msgid "User"
msgstr "Bruker"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Help/_About..."
msgstr "/Hjelp/_Om..."

#: ../../standalone/logdrake:1
#, c-format
msgid "/Options/Test"
msgstr "/Valg/Test"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/-"
msgstr "/Fil/-"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/Save _As"
msgstr "/Fil/Lagre _Som"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>S"
msgstr "<control>L"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Save"
msgstr "/Fil/_Lagre"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>O"
msgstr "<control>�"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Open"
msgstr "/Fil/_�pne"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_New"
msgstr "/Fil/_Ny"

#: ../../standalone/logdrake:1
#, c-format
msgid "Show only for the selected day"
msgstr "Vis kun for den valgte dag"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Emulate third button?"
msgstr "Emulere tredje knapp?"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Please choose your mouse type."
msgstr "Vennligst velg din musetype."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connect %s"
msgstr "Koble til %s"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnect %s"
msgstr "Koble fra %s"

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Advarsel, en annen internettoppkobling har blitt oppdaget, kanskje bruker "
"ditt nettverk"

#: ../../standalone/net_monitor:1
#, c-format
msgid "received"
msgstr "mottatt"

#: ../../standalone/net_monitor:1
#, c-format
msgid "transmitted"
msgstr "overf�rt"

#: ../../standalone/net_monitor:1
#, c-format
msgid "received: "
msgstr "mottatt: "

#: ../../standalone/net_monitor:1
#, c-format
msgid "sent: "
msgstr "sendt: "

#: ../../standalone/net_monitor:1
#, c-format
msgid "Local measure"
msgstr "Lokal m�ling"

#: ../../standalone/net_monitor:1
#, c-format
msgid "average"
msgstr "gjennomsnitt"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Color configuration"
msgstr "Farge-konfigurasjon"

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"Oppkobling feilet.\n"
"Sjekk konfigurasjonen din i Mandrake Control Center."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection complete."
msgstr "Oppkobling ferdig."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from the Internet complete."
msgstr "Frakobling fra internett fullf�rt."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from the Internet failed."
msgstr "Frakobling fra internett feilet."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connecting to the Internet "
msgstr "Kobler opp mot Internett"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnecting from the Internet "
msgstr "Kobler fra Internett"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Vennligst venter, tester tilkoblingen din..."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Logs"
msgstr "Logger"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection Time: "
msgstr "Oppkoblingstid:"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Receiving Speed:"
msgstr "Nedlastningshastighet:"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Sending Speed:"
msgstr "Sendehastighet:"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Statistics"
msgstr "Statistikker"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Profile "
msgstr "Profil "

#: ../../standalone/net_monitor:1
#, c-format
msgid "Network Monitoring"
msgstr "Nettverksoverv�kning"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Reading data of installed printers..."
msgstr "Leser data fra installerte skrivere..."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Name/IP address of host:"
msgstr "Navn/IP-adresse p� vert"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Denne verten er allerede i listen, den kan ikke bli lagt til igjen.\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Du m� spesifisere vertsnavn eller en IP.\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
"Velg verten som de(n) lokale scanneren(e) skal bli gjort tilgjengelig for:"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Sharing of local scanners"
msgstr "Deling av lokale scannere"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This machine"
msgstr "Denne maskinen"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Remove selected host"
msgstr "Fjern valgte vert"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Edit selected host"
msgstr "Rediger valgte vert"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add host"
msgstr "Legg til vert"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Dette er maskinene som scanneren skal kunne bli brukt fra:"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Usage of remote scanners"
msgstr "Bruk av fjerne scannere"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "All remote machines"
msgstr "Alle fjerne maskiner"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""
"Dette er maskiner som de(n) lokalt tilkoblede scanneren(e) skal v�re "
"tilgjengelig for:"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Bruk scannere p� verter: "

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use scanners on remote computers"
msgstr "Bruk scannere p� fjerne maskiner"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Scanner deler til verter: "

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Scannerne p� denne maskinen er tilgjengelig for andre maskiner"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Du kan ogs� velge om fjernskannere kan bli gjort tilgjengelige p� denne "
"maskinen."

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Her kan du velge om scannerne tilkoblet denne maskinen skal v�re "
"tilgjengelige for andre maskiner og for hvilke."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "Re-genererer liste over konfigurerte scannere ..."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for new scanners ..."
msgstr "S�ker etter nye scannerer ..."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for configured scanners ..."
msgstr "S�ker etter konfigurerte scannere ..."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing"
msgstr "Scannerdeling"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add a scanner manually"
msgstr "Legg til scanner manuelt"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Search for new scanners"
msgstr "S�k for nye scannere"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr ""
"Det ble ikke funnet noen scannere som er tilgjengelig p� ditt system.\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Den f�lgende scanneren\n"
"\n"
"%s\n"
"er tilgjengelig p� ditt system.\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"De f�lgende scannerene\n"
"\n"
"%s\n"
"er tilgjengelige p� ditt system.\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
"applications menu."
msgstr ""
"Din %s har blitt konfigurert.\n"
"Du vil n� kunne scanne dokumentene dine ved hjelp av \"XSane\" fra "
"Multimedia/Grafikk i applikasjonsmenyen."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "choose device"
msgstr "velg enhet"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Vennligst velg enheten hvor din %s er tilkoblet"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for scanners ..."
msgstr "S�ker etter scannere ..."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Auto-detect available ports"
msgstr "Oppdag automisk tilgjengelige porter"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Merk: Parallellporter kan ikke bli automatisk oppdaget)"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""
"%s m� v�re konfigurert av printerdrake.\n"
"Du kan kj�re Mandrake Conrol Center fra maskinvareseksjonen."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is unsupported"
msgstr "%s er ikke st�ttet"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "%s er ikke kjent av denne versjonen av Scannerdrake."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr "%s er ikke st�ttet i denne versjonen av Mandrake Linux."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Port: %s"
msgstr "Port: %s"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ", "
msgstr ", "

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Detected model: %s"
msgstr "Oppdaget modell %s"

#: ../../standalone/scannerdrake:1
#, c-format
msgid " ("
msgstr " ("

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Select a scanner model"
msgstr "Velg en scannermodell"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s er ikke i skannerdatabasen, konfigurere den manuelt?"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s ble funnet p� %s, vil du konfigurere den automatisk?"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Hardware probing in progress"
msgstr "Maskinvareoppdagelse p�g�r"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices were added:\n"
msgstr "Noen enheter ble lagt til:\n"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Noen enheter i \"%s\" maskinvareklassen ble fjernet:\n"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work of the "
"worldwide Linux Community."
msgstr ""
"Suksessen til Mandrakesoft er basert p� prinsippene tli Fri Programvare. "
"Ditt nye operativsystem er resultatet av samarbeidet til det verdensdekkende "
"Linuxmilj�et. "

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world."
msgstr "Velkommen til �pen kilde verdenen"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr "Takk for at du valgte Mandrake Linux 9.1"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux software, join our "
"discussion forums on our \"Community\" webpages."
msgstr ""
"For � dele din kunnskap og hjelpe til med � lage Linuxprogramvare, bli med i "
"v�re diskusjonsfora p� v�re \"Community\" vevsider. "

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"Want to know more and to contribute to the Open Source community? Get "
"involved in the Free Software world!"
msgstr ""
"Vil du vite mer og bidra til Open Source samfunnet? Bli involvert i verdenen "
"av Fri Programvare!"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Build the future of Linux!"
msgstr "Bygg fremftiden for Linux!"

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"And, of course, push multimedia to its limits with the very latest software "
"to play videos, audio files and to handle your images or photos."
msgstr ""
"Og selvf�lgelig, press multimedia til sine ytterste grenser med den aller "
"siste programvare for � spille av video, lydfiler og for � h�ndtere dine "
"bilder eller fotoer."

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
"Kmail, create your documents with OpenOffice.org."
msgstr ""
"Surf nettet med Mozilla eller Konqueroer, les din epost med Evolution eller "
"Kmail, lag dine dokumenter med OpenOffice.org."

#: ../../share/advertising/03-software.pl:1
#, c-format
msgid "MandrakeSoft has selected the best software for you"
msgstr "MandrakeSoft har valgt den beste programvaren for deg"

#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
"tool to fully adapt your computer to the use you make of it. Configure and "
"customize elements such as the security level, the peripherals (screen, "
"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
"Mandrake Linux 9.1 gir deg Mandrake Kontrollsenter, et kraftig verkt�y for � "
"tilpasse din maskin fullstendig til det bruk du har behov for. Konfigurer og "
"tilpass elementer som sikkerhetsniv�, tilbeh�r (skjerm, mus, tastatur), "
"internettforbindelse og mye mer!"

#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid "Mandrake's multipurpose configuration tool"
msgstr "Mandrakes multifunksjons konfigurasjonsverkt�y"

#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
"Perfectly adapt your computer to your needs thanks to the 11 available "
"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
"2.2, Window Maker, ..."
msgstr ""
"Tilpass din maskin fullstendig til dine behov takket v�re 11 tilgjengelige "
"Mandake Linux brukergrensesnitt som kan modifiseres i stor grad: KDE 3.1, "
"GNOME 2.2, Window Maker, ..."

#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid "A customizable environment"
msgstr "Et tilpasningsvennlig milj�"

#: ../../share/advertising/06-development.pl:1
#, c-format
msgid ""
"To modify and to create in different languages such as Perl, Python, C and C+"
"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
"development environments."
msgstr ""
"� modifisere og endre i forskjellige spr�k som Perl, Python, C og C++ har "
"aldri v�rt s� enkelt, takket v�re GNU gcc 3 og de beste utviklingsmilj�ene "
"basert p� �pen kildekode."

#: ../../share/advertising/06-development.pl:1
#, c-format
msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr "Mandrake Linux 9.1: den ultimate utviklingsplattformen"

#: ../../share/advertising/07-server.pl:1
#, c-format
msgid ""
"Transform your computer into a powerful Linux server: Web server, mail, "
"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
"Gj�r om din maskin til en kraftig Linux-tjener: Webtjener, epost, brannmur, "
"router, fil og skriverdeling (etc.) er bare noen f� klikk unna!"

#: ../../share/advertising/07-server.pl:1
#, c-format
msgid "Turn your computer into a reliable server"
msgstr "Gj�r om din maskin til en server du kan stole p�"

#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies\", are available on our e-store:"
msgstr ""
"V�r lange rekke av Linux l�sninger, s� vel som spesialtilbyd p� produkter og "
"andre \"godsaker\", er tilgjengelig fra fra v�r e-butikk:"

#: ../../share/advertising/08-store.pl:1
#, c-format
msgid "The official MandrakeSoft Store"
msgstr "Den offisielle MandrakeSoft butikken"

#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid ""
"Enhance your computer performance with the help of a selection of partners "
"offering professional solutions compatible with Mandrake Linux"
msgstr ""
"Forbedre din maskinytelse ved hjelp av utvalgte partnere som tilbyr "
"profesjonelle l�sninger kompatible med Mandrake Linux"

#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr "F� de beste sakene med Mandrake Linux strategiske partnere"

#: ../../share/advertising/10-security.pl:1
#, c-format
msgid ""
"MandrakeSoft has designed exclusive tools to create the most secured Linux "
"version ever: Draksec, a system security management tool, and a strong "
"firewall are teamed up together  in order to highly reduce hacking risks."
msgstr ""
"MandrakeSoft har designet eksklusive verkt�y for � lage den mest sikre Linux-"
"versjonen noensinne: Draksec, et systemsikkerhets-h�ndteringsverkt�y, og en "
"sterk brannmur i lag sammen for � redusere hackingrisikoen betraktelig."

#: ../../share/advertising/10-security.pl:1
#, c-format
msgid "Optimize your security by using Mandrake Linux"
msgstr "Optimaliser din sikkerhet ved � bruke Mandrake Linux"

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "This product is available on the MandrakeStore Web site."
msgstr "Dette produktet er tilgjengelig p� MandrakeStore nettstedet."

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
"Complete your security setup with this very easy-to-use software which "
"combines high performance components such as a firewall, a virtual private "
"network (VPN) server and client, an intrusion detection system and a traffic "
"manager."
msgstr ""
"Fullf�r ditt sikkerhetsoppsett med denne veldig brukervennlige programvaren "
"som kombinerer h�yytelses komponenter som brannmur, virutelle private "
"nettverk (VPN) tjener og klient, et innbrudsoppdagelsessystem og en "
"trafikkh�ndterer."

#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid "Secure your networks with the Multi Network Firewall"
msgstr "Sikre dine nettverk med Multi Network Firewall'en"

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""
"Bli med i MandrakeSoft kundest�ttelag og Linuxsamfunnet online for � dele "
"din viten og hjelpe andre ved � bli en anerkjent Ekspert p� tekniske "
"kundest�tte websiden online p�:"

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform."
msgstr ""
"Finn l�sningen p� dine problemer via MandrakeSoft's online "
"kundest�tteplattform."

#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr "Bli en MandrakeExpert"

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""
"Alle tilfeller vil bli fulgt opp av en enkelt kvalifisert MandrakeSoft "
"teknisk ekspert."

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "An online platform to respond to enterprise support needs."
msgstr "En onlineplattform for � svare st�rre virksomheter's st�ttebehov."

#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "MandrakeExpert Corporate"
msgstr "MandrakeExpert Bedrift"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Kontor og arbeidsmaskin"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Kontorst�tteprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, "
"gnumeric), pdf fremvisere etc"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Arbeidstasjon"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spillstasjon"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimediastasjon"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Lyd og bilde avspilling/redigeringsprogrammer"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internettstasjon"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Sett med verkt�y for � lese og sende e-post og nyheter (mutt, tin...) og for "
"se p� webben"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Nettverksmaskin (klient)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klienter for forskjellige protokoller inkludert ssh"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfigurasjon"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Verkt�y for � forenkle konfigurasjonen av maskinen din"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Vitenskaplig arbeidsstasjon"

#: ../../share/compssUsers:999
msgid "Scientific applications such as gnuplot"
msgstr "Vitenskapsapplikasjoner som gnuplot"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konsollverkt�y"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Redigerere, skall, filverkt�y, terminaler"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE arbeidstasjon"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop Environment, basis grafikkmilj� med en samling av passende verkt�y"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Grafisk milj�"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome arbeidstasjon"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Et grafisk milj� med et brukervennlig sett med applikasjoner og skrivebords-"
"verkt�y"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Andre grafiske skrivebord"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Utvikling"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C og C++ utviklingsbibliotek, programmer og include-filer"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentasjon"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "B�ker og howto's om Linux og fri programvare"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr "LSB"

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr "Linux Standard Base. Tredjeparts programvarest�tte"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Web/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Mail"
msgstr "Epost"

#: ../../share/compssUsers:999
msgid "Postfix mail server"
msgstr "Postfix eposttjener"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Database"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL eller MySQL database tjener"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Tjener, Brannmur/ruter"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internett-gateway"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Tjener for domenenavn og nettverksinformasjon"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Nettverk datamaskintjener"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Audio station"
msgstr "Multimediastasjon"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Sound playing/editing programs"
msgstr "Lyd og bilde avspilling/redigeringsprogrammer"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Video station"
msgstr "Spillstasjon"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Video playing programs"
msgstr "Lyd og bilde avspilling/redigeringsprogrammer"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Graphic station"
msgstr "Spillstasjon"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Graphics programs"
msgstr "Grafiske programmer s� som Gimp"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Sett med verkt�y for � lese og sende e-post og nyheter (mutt, tin...) og for "
"se p� webben"

#~ msgid "Printer sharing"
#~ msgstr "Skriverdeling"

#~ msgid ""
#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
#~ "raster format for the data sent to the printer. The driver for these "
#~ "printers is still in a very early development stage and so it will "
#~ "perhaps not always work properly. Especially it is possible that the "
#~ "printer only works when you choose the A4 paper size.\n"
#~ "\n"
#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
#~ "was originally created, need their firmware to be uploaded to them after "
#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
#~ "search the printer's Windows driver CD or your Windows partition for the "
#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
#~ "following commands:\n"
#~ "\n"
#~ "     lpr -o raw sihp1000.img\n"
#~ "     cat sihp1000.img > /dev/usb/lp0\n"
#~ "\n"
#~ "The first command can be given by any normal user, the second must be "
#~ "given as root. After having done so you can print normally.\n"
#~ msgstr ""
#~ "Skriveren din tillh�rer gruppen av GDI laserskrivere (winprinters) solgt "
#~ "av forskjellige produsenter som bruker Zenographics ZJ stream "
#~ "rasterformat for dataene som blir sendt til skriveren. Driveren for disse "
#~ "skriverne erfortsatt i et meget tidlig utviklingstrinn og vil da kanskje "
#~ "ikke alltid fungere skikkelig. Spesielt er det mulig at skriveren bare "
#~ "arbeider n�r du velger A4 papirst�rrelse.\n"
#~ "\n"
#~ "Noen av disse skriverne, som HP Laserjet 1000, som denne driveren "
#~ "opprinnelig ble laget for, trenger at deres firmware blir lastet opp til "
#~ "dem etter de skrus p�. I HP Laserjet 1000 tilfellet, s� trengs det at du "
#~ "s�ker igjennom skriverens Windows driver CD eller din Windows partisjon "
#~ "for filen \"sihp1000.img\" og laster filen opp til printeren med en av de "
#~ "f�lgende kommandoene:\n"
#~ "\n"
#~ "     lpr -o raw sihp1000.img\n"
#~ "     cat sihp1000.img > /dev/usb/lp0\n"
#~ "\n"
#~ "Den f�rste kommandoen kan gis av en vanlig bruker, den andre m� bli gitt "
#~ "som root. Etter at du har gjort det kan skrive ut som vanlig.\n"

#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "GDI Laserskriver som benytter \"Zenographics ZJ stream\" format"

#~ msgid "%s"
#~ msgstr "%s"

#~ msgid "Office"
#~ msgstr "Office"

#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
#~ msgstr "Sett med verkt�y for e-post, nyheter, web, filoverf�ring og chat"

#~ msgid "Games"
#~ msgstr "Spill"

#~ msgid "Multimedia - Graphics"
#~ msgstr "Multimedia - Grafikk"

#~ msgid "Multimedia - Sound"
#~ msgstr "Multimedia - Lyd"

#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
#~ msgstr "Lydrelaterte verkt�y: mp3 eller midi-spillere, miksere etc."

#~ msgid "Multimedia - Video"
#~ msgstr "Multimedia - Video"

#~ msgid "Video players and editors"
#~ msgstr "Videospillere og redigerere"

#~ msgid "Multimedia - CD Burning"
#~ msgstr "Multimedia - CD-brenning"

#~ msgid "Tools to create and burn CD's"
#~ msgstr "Verkt�y for � opprette og brenne CD'er"

#~ msgid "More Graphical Desktops (Gnome, IceWM)"
#~ msgstr "Mere grafiske skrivebord (Gnome, IceWM)"

#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc"

#~ msgid "Personal Information Management"
#~ msgstr "Personling informasjonsh�ndtering"

#~ msgid "Tools for your Palm Pilot or your Visor"
#~ msgstr "Verkt�y for din Palm Pilot eller din Visor"

#~ msgid "Personal Finance"
#~ msgstr "Personlig �konomi"

#~ msgid "Programs to manage your finances, such as gnucash"
#~ msgstr "Programmer for � h�ndtere dine finanser, s� som gnucash"

#~ msgid "no network card found"
#~ msgstr "ingen nettverkskort funnet"

#~ msgid "Get the most from the Internet"
#~ msgstr "F� tak i det meste fra internett"

#~ msgid "User interfaces"
#~ msgstr "Brukergrensesnitt"

#~ msgid "Development simplified"
#~ msgstr "Utvikling forenklet"

#~ msgid ""
#~ "As a review, DrakX will present a summary of various information it has\n"
#~ "about your system. Depending on your installed hardware, you may have "
#~ "some\n"
#~ "or all of the following entries:\n"
#~ "\n"
#~ " * \"Mouse\": check the current mouse configuration and click on the "
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
#~ " * \"Keyboard\": check the current keyboard map configuration and click "
#~ "on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
#~ " * \"Country\": check the current country selection. If you are not in "
#~ "this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
#~ "primary language you have chosen. But here, just as in your choice of a\n"
#~ "keyboard, you may not be in a country to which the chosen language\n"
#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
#~ "configure the clock for the correct timezone.\n"
#~ "\n"
#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
#~ "printer\n"
#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
#~ "Guide'' for more information on how to setup a new printer. The "
#~ "interface\n"
#~ "presented there is similar to the one used during installation.\n"
#~ "\n"
#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
#~ "click that button. This should be reserved to advanced users.\n"
#~ "\n"
#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
#~ "interface in \"800x600\" resolution. If that does not suits you, click "
#~ "on\n"
#~ "the button to reconfigure your graphical interface.\n"
#~ "\n"
#~ " * \"Network\": If you want to configure your Internet or local network\n"
#~ "access now, you can by clicking on this button.\n"
#~ "\n"
#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
#~ "displayed here. If you notice the sound card displayed is not the one "
#~ "that\n"
#~ "is actually present on your system, you can click on the button and "
#~ "choose\n"
#~ "another driver.\n"
#~ "\n"
#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
#~ "here. If you have a TV card and it is not detected, click on the button "
#~ "to\n"
#~ "try to configure it manually.\n"
#~ "\n"
#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
#~ "displayed here. You can click on the button to change the parameters\n"
#~ "associated with the card."
#~ msgstr ""
#~ "DrakX vil presentere en oppsummering av informasjon den har om systemet\n"
#~ "ditt. Avhengig av installert maskinvare, vil du ha noen av de f�lgende "
#~ "typene:\n"
#~ "\n"
#~ " * \"Mus\": Sjekk det gjeldende museoppsettet og klikk p� knappen for � "
#~ "endre den om n�dvendig.\n"
#~ "\n"
#~ " * \"Tastatur\": Sjekk det gjeldende tastaturoppsettet og klikk p� "
#~ "knappen for � forandre det om n�dvendig.\n"
#~ "\n"
#~ " * \"Tidssone\": DrakX gjetter tidssonen din ut i fra spr�ket du\n"
#~ "har valgt. Men her, som for valget av tastatur, er du kanskje ikke\n"
#~ "i det landet som valgt spr�k skulle tilsi.\n"
#~ "Derfor m� du kanskje klikke p� \"Timezone\" knappen for � konfigurere\n"
#~ "klokken til tidssonen der du er.\n"
#~ "\n"
#~ " * \"Skriver\": Klikk p� \"Ingen skriver\" knappen for � �pne skriver\n"
#~ "konfigurasjonsveiviseren. Konsulter kapittelet``Starter Guide'' for mer\n"
#~ "informasjon om � sette opp en ny skriver. Grensesnittet du f�r "
#~ "presentert\n"
#~ "der er lignende det som brukes under installasjonen.\n"
#~ "\n"
#~ " * \"Oppstartslaster\": Hvis du �nsker � endre din "
#~ "oppstartslasterkonfigurasjon,\n"
#~ "klikk p� denne knappen. Dette er forbeholdt avanserte brukere.\n"
#~ "\n"
#~ " * \"Grafisk grensesnitt\": som standard vil DrakX konfigurere ditt "
#~ "grafiske\n"
#~ "grensesnitt til \"800x600\" oppl�sning. Hvis dette ikke passer deg, klikk "
#~ "p�\n"
#~ "knappen for � rekonfigurere ditt grafiske grensesnitt.\n"
#~ "\n"
#~ " * \"Nettverk\": Hvis du �nsker � konfigurere din internett eller lokale\n"
#~ "nettverkstilkobling n�, s� kan du klikke p� denne knappen.\n"
#~ "\n"
#~ " * \"Lydkort\": Hvis et lydkort blir oppdaget p� systemet ditt, blir det\n"
#~ "vist her. Hvis du oppdager at lydkortet som blir vist her ikke er det "
#~ "som\n"
#~ "faktisk er til stede p� ditt system, s� kan du klikke p� denne knappen "
#~ "for\n"
#~ "� velge en annen driver.\n"
#~ "\n"
#~ " * \"TV kort\": Hvis et TV-kort blir oppdaget p� systemet ditt, blir det\n"
#~ "vist her. Hvis du har et TV-kort og det ikke blir oppdaget, klikk p� "
#~ "knappen\n"
#~ "for � pr�ve � konfigurere det manuelt.\n"
#~ "\n"
#~ " * \"ISDN-kort: hvis et ISDN-kort blir oppdaget p� systemet ditt, blir\n"
#~ "det vist her. Du kan klikke p� knappen for � endre parameterene\n"
#~ "til kortet."

#~ msgid ""
#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
#~ "what it finds there:\n"
#~ "\n"
#~ " * if a Windows boot sector is found, it will replace it with a grub/"
#~ "LILO\n"
#~ "boot sector. This way you will be able to load either GNU/Linux or "
#~ "another\n"
#~ "OS.\n"
#~ "\n"
#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
#~ "one.\n"
#~ "\n"
#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
#~ "bootloader.\n"
#~ "\n"
#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
#~ "disk\n"
#~ "(\"On Floppy\").\n"
#~ "\n"
#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
#~ "handy.\n"
#~ "\n"
#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
#~ "by\n"
#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
#~ ">>rescue<<\n"
#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
#~ "at\n"
#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
#~ "(MBR)\n"
#~ "of your main disk (unless you are using another boot manager), to allow "
#~ "you\n"
#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
#~ "on\n"
#~ "your system). If at some point you need to reinstall Windows, the "
#~ "Microsoft\n"
#~ "install process will rewrite the boot sector and remove your ability to\n"
#~ "start GNU/Linux!\n"
#~ "\n"
#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
#~ "disk,\n"
#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
#~ "a\n"
#~ "fair number of system tools for restoring a system that has crashed due "
#~ "to\n"
#~ "a power failure, an unfortunate typing error, a forgotten root password, "
#~ "or\n"
#~ "any other reason.\n"
#~ "\n"
#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
#~ "format the floppy and will rewrite the whole disk."
#~ msgstr ""
#~ "LILO og grub er GNU/Linux oppstartslastere. Vanligvis vil dette steget\n"
#~ "v�re fullstendig automatisk. DrakX vil analysere diskens oppstartssektor\n"
#~ "og handle ut i fra hva den finner der:\n"
#~ "\n"
#~ " * hvis en Windows oppstartssektor blir funnet, s� vil den bli byttet ut "
#~ "med\n"
#~ "en grub eller LILO oppstartssektor. P� denne m�ten s� vil du v�re i "
#~ "stand\n"
#~ "til � laste enten GNU/Linux eller et annet OS.\n"
#~ "\n"
#~ " * hvis en grub eller LILO oppstartssektor blir funnet, s� vil den bli "
#~ "byttet\n"
#~ "ut med en ny en.\n"
#~ "\n"
#~ "Hvis den ikke klarer � finne ut et oppsett, s� vil DrakX sp�rre deg om "
#~ "hvor\n"
#~ "oppstartslasteren skal plasseres.\n"
#~ "\n"
#~ "\"Oppstartsenhet\": I de fleste tilfeller, s� vil du ikke endre det "
#~ "forh�ndsvalgte\n"
#~ "(\"F�rste sektor p� disken (MBR)\"), men hvis du foretrekker det, s� kan\n"
#~ "oppstartslasteren bli installert p� en annen harddisk (feks. \"/dev/hdb"
#~ "\"), eller\n"
#~ "til og med p� en diskett (\"P� diskett\").\n"
#~ "\n"
#~ "Ved � sjekke av \"Lag oppstartsdiskket\" s� vil du f� muligheten til � "
#~ "ha\n"
#~ "et ekstra oppstartsmedia for h�nden for sikkerhetsskyld.\n"
#~ "\n"
#~ "Mandrake Linux CD-ROMen har et innebygd redningsmodus. Du kan f�\n"
#~ "tilgang til det ved � starte opp fra CDen, og s� presse >> F1 << knappen\n"
#~ "og skrive >>rescue<< ved prompten. Hvis maskinen din ikke kan starte\n"
#~ "fra CDen, s� er det minst to tilfeller hvor det � ha en oppstartsdiskket "
#~ "er\n"
#~ "kritisk:\n"
#~ "\n"
#~ " * under installasjonen av oppstartslasteren, s� vil DrakX omskrive\n"
#~ "oppstartssektoren (MBR) p� din hoveddisk (med mindre du bruker en\n"
#~ "annen oppstartsh�ndterer), for � tillate deg � starte opp med enten\n"
#~ "Windows eller GNU/Linux (forutsatt at du har Windows p� ditt system).\n"
#~ "Hvis du skulle noen gang beh�ve � reinstallere Windows, s� vil\n"
#~ "Microsoft's installasjonsprosess omskrive oppstartssektoren og fjerne\n"
#~ "din mulighet til � starte GNU/Linux!\n"
#~ "\n"
#~ "\n"
#~ " * hvis et problem oppst�r som gj�r at du ikke kan starte GNU/Linux\n"
#~ "fra ahrddisken, s� vil denne disketten bli den eneste m�ten du kan "
#~ "starte\n"
#~ "GNU/Linux p�. Den inneholder noen verkt�y for � redde systemet som har\n"
#~ "kr�sjet enten ved en str�mfeil, en uheldig skrivefeil, et glemt root-"
#~ "passord\n"
#~ "eller hvilken som helst annen grunn.\n"
#~ "\n"
#~ "Hvis du sier \"Nei\", s� vil du bli spurt om � sette inn disketten i "
#~ "stasjonen.\n"
#~ "Disketten m� v�re tom eller ha ingen viktige data p� den. - DrakX vil "
#~ "formatere\n"
#~ "disketten og skrive over den."

#~ msgid ""
#~ "The following printers are configured. Double-click on a printer to "
#~ "change its settings; to make it the default printer; to view information "
#~ "about it; or to make a printer on a remote CUPS server available for Star "
#~ "Office/OpenOffice.org/GIMP."
#~ msgstr ""
#~ "De f�lgende skriverne er konfigurerte. Dobbetklikk p� skriveren for � "
#~ "endre oppsettet; for � gj�re dem til standard skriver; for � vise "
#~ "informasjon om den; eller for � gj�re en skriver p� en fjern CUPS-tjener "
#~ "tilgjengelig for Star Office/ OpenOffice.org/GIMP."

#~ msgid ""
#~ "Please enter your host name if you know it.\n"
#~ "Some DHCP servers require the hostname to work.\n"
#~ "Your host name should be a fully-qualified host name,\n"
#~ "such as ``mybox.mylab.myco.com''."
#~ msgstr ""
#~ "Vennligst entre vertsnavnet ditt hvis du vet det.\n"
#~ "Noen DHCP tjenere trenger vertsnavnet for � virke.\n"
#~ "Vertsnavnet ditt b�r v�re et full-kvalifisert vertsnavn,\n"
#~ "som ``minboks.mittlab.mittfirma.no''."

#~ msgid "DrakFloppy Error: %s"
#~ msgstr "Feil: DrakFloppy: %s"

#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"

#~ msgid "Launch Aurora at boot time"
#~ msgstr "Start Aurora ved oppstart"

#~ msgid "Traditional Gtk+ Monitor"
#~ msgstr "Tradisjonell Gtk+ monitor"

#~ msgid "Traditional Monitor"
#~ msgstr "Tradisjonell monitor"

#~ msgid "NewStyle Monitor"
#~ msgstr "NewStyle Monitor"

#~ msgid "NewStyle Categorizing Monitor"
#~ msgstr "NewStyle Categorizing Monitor"

#~ msgid "Secure Connection"
#~ msgstr "Sikker tilkobling"

#~ msgid "FTP Connection"
#~ msgstr "FTP tilkobling"

#~ msgid "Mail/Groupware/News"
#~ msgstr "Server, Mail/Gruppevare/News"

#~ msgid "Postfix mail server, Inn news server"
#~ msgstr "Postfix posttjener, Inn nyhetstjener"

#~ msgid "/Options"
#~ msgstr "/Valg"

#~ msgid ""
#~ "The partition you've selected to add as root (/) is physically located "
#~ "beyond\n"
#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
#~ "partition"
#~ msgstr ""
#~ "Partisjonen du valgte � legge til som root (/) er lokalisert fysisk "
#~ "bortenfor\n"
#~ "den 1024'de sylinderen p� hard-disken, og du har ingen /boot partisjon.\n"
#~ "Hvis du skal bruke oppstartsh�ndtereren LILO, v�r n�ye med � legge til "
#~ "en\n"
#~ "/boot partisjon"

#~ msgid ""
#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
#~ "> 1024).\n"
#~ "Either you use LILO and it won't work, or you don't use LILO and you "
#~ "don't need /boot"
#~ msgstr ""
#~ "Beklager, jeg vil ikke tillate oppretting av /boot s� lange inne p� "
#~ "disken (p� en sylinder > 1024).\n"
#~ "Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og "
#~ "du trenger ikke /boot"

#~ msgid "Upgrade"
#~ msgstr "Oppgrader"

#~ msgid "Do you want to configure another printer?"
#~ msgstr "�nsker du � konfigurere enda en skriver?"

#~ msgid "Know how to use this printer"
#~ msgstr "Vet hvordan man skal bruke denne skriveren"

#~ msgid "Would you like to configure printing?"
#~ msgstr "�nsker du � konfigurere en skriver?"

#~ msgid "Preparing Printerdrake..."
#~ msgstr "Klargj�rer PrinterDrake..."

#~ msgid "Reading printer data ..."
#~ msgstr "Leser skriverdata: ..."

#~ msgid ""
#~ "Here are presented various parameters concerning your machine. Depending "
#~ "on\n"
#~ "your installed hardware, you may (or may not), see the following "
#~ "entries:\n"
#~ "\n"
#~ " * \"Mouse\": check the current mouse configuration and click on the "
#~ "button\n"
#~ "to change it if necessary;\n"
#~ "\n"
#~ " * \"Keyboard\": check the current keyboard map configuration and click "
#~ "on\n"
#~ "the button to change that if necessary;\n"
#~ "\n"
#~ " * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
#~ "language you have chosen. But here again, as for the choice of a "
#~ "keyboard,\n"
#~ "you may not be in the country for which the chosen language should\n"
#~ "correspond. Hence, you may need to click on the \"Timezone\" button in\n"
#~ "order to configure the clock according to the time zone you are in;\n"
#~ "\n"
#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
#~ "printer\n"
#~ "configuration wizard. Consult the correpsonding chapter of the ``Starter\n"
#~ "Guide'' for more information on how to setup a new printer. The "
#~ "interface\n"
#~ "presented there is similar to the one used at installation time;\n"
#~ "\n"
#~ " * \"Sound card\": if a sound card is detected on your system, it will "
#~ "be\n"
#~ "displayed here.\n"
#~ "\n"
#~ " * \"TV card\": if a TV card is detected on your system, it will be\n"
#~ "displayed here.\n"
#~ "\n"
#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
#~ "displayed here. You can click on the button to change the parameters\n"
#~ "associated to it."
#~ msgstr ""
#~ "Her f�r du presentert diverse parametre ang�ende din maskin. Avhengig av "
#~ "hva\n"
#~ " slags installert maskinvare du har, s� vil du (eller muligens ikke) se "
#~ "de f�lgende typene:\n"
#~ " * \"Mouse\": sjekk den gjeldende museoppsettet og klikk p� knappe for � "
#~ "endren\n"
#~ "den om n�dvendig.\n"
#~ "\n"
#~ " * \"Keyboard\": sjekk det gjeldende keyboardoppsettet og klikk p� "
#~ "knappen for\n"
#~ "� forandre om n�dvendig.\n"
#~ "\n"
#~ " * \"Timezone\": DrakX gjetter tidssonen din ut i fra spr�ket du\n"
#~ "har valgt. Men her, ogs� for valget av tastatur, er du kanskje ikke\n"
#~ "i det landet som valgt spr�k skulle tilsi.\n"
#~ "Derfor m� du kanskje klikke p� \"Timezone\" knappen for � konfigurere\n"
#~ "klokken til tidssonen der du er.\n"
#~ "\n"
#~ " * \"Printer\": Klikke p� \"No Printer\" knappen vil �pne skriver\n"
#~ "konfigureringshjelperen.\n"
#~ "\n"
#~ " * \"Sound card\": Hvis et lydkort blir oppdaget p� systemet ditt, blir "
#~ "det\n"
#~ "vist her. Ingen modifisering mulig under installering.\n"
#~ "\n"
#~ " * \"TV card\": Hvis et TV-kort blir oppdaget p� systemet ditt, blir det\n"
#~ "vist her. Ingen modifisering mulig under installering.\n"
#~ "\n"
#~ " * \"ISDN card\": Hvis et ISDN-kort blir oppdaget p� systemet ditt, blir "
#~ "det\n"
#~ "vist her. Du kan klikke p� knappen for � endre parameterene assosiert\n"
#~ "til dette."

#~ msgid ""
#~ "DrakX now detects any IDE device present in your computer. It will also\n"
#~ "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
#~ "found, DrakX will automatically install the appropriate driver.\n"
#~ "\n"
#~ "Because hardware detection does not always detect a piece of hardware,\n"
#~ "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes"
#~ "\"\n"
#~ "if you know that there is a SCSI card installed in your machine. You "
#~ "will\n"
#~ "be presented with a list of SCSI cards to choose from. Click \"No\" if "
#~ "you\n"
#~ "have no SCSI hardware. If you are unsure, you can check the list of\n"
#~ "hardware detected in your machine by selecting \"See hardware info\" and\n"
#~ "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n"
#~ "button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you have to manually specify your adapter, DrakX will ask if you want "
#~ "to\n"
#~ "specify options for it. You should allow DrakX to probe the hardware for\n"
#~ "the card-specific options which the hardware needs to initialize. This\n"
#~ "usually works well.\n"
#~ "\n"
#~ "If DrakX is not able to probe for the options which need to be passed, "
#~ "you\n"
#~ "will need to manually provide options to the driver."
#~ msgstr ""
#~ "DrakX vil n� oppdage alle IDE-enheter som er tilstede p� ditt system. Det "
#~ "vil ogs�\n"
#~ "scanne etter en eller flere PCI SCSI-kort p� systemet ditt. Hvis ett SCSI-"
#~ "kort er tilstede,\n"
#~ "s� DrakX automatisk installere den passende driveren.\n"
#~ "\n"
#~ "P� grunn av at maskinvareoppdagelse ikke alltid klarer � oppdage enkelte "
#~ "enheter,\n"
#~ "s� vil DrakX sp�rre deg om du har ett PCI SCSI-kort tilstede. Velg \"Yes"
#~ "\"\n"
#~ "hvis du vet at du har ett SCSI-kort installert p� din maskin. Velg \"No\" "
#~ "hvis du\n"
#~ "ikke har noe SCSI-maskinvare. Hvis du er usikker, kan du sjekke listen "
#~ "over\n"
#~ "maskinvare som er oppdaget p� din maskin ved � velge \"See hardware info"
#~ "\" og\n"
#~ "klikke \"OK\". Utforsk maskinvarelisten og s� velg \"OK\"\n"
#~ "for � g� tilbake til SCSI-grensesnitt sp�rsm�let.\n"
#~ "\n"
#~ "Hvis du m� spesifisere kontrolleren din manuelt, s� vil DrakX sp�rre deg "
#~ "om\n"
#~ "� gj�re noen valg for det. Du burde tillate DrakX � teste maskinvaren "
#~ "for\n"
#~ "kort-spesifikke valg som maskinvaren trenger for � initialiseres. Dette\n"
#~ "pleier vanligvis � g� bra.\n"
#~ "\n"
#~ "Hvis DrakX ikke klarer � oppdage det riktige oppsettet som trengs, s� m� "
#~ "du\n"
#~ "manuelt sette det opp for driveren."

#~ msgid ""
#~ "You must indicate where you wish to place the information required to "
#~ "boot\n"
#~ "GNU/Linux.\n"
#~ "\n"
#~ "Unless you know exactly what you are doing, choose \"First sector of "
#~ "drive\n"
#~ "(MBR)\"."
#~ msgstr ""
#~ "Du m� indikere hvor du �nsker �\n"
#~ "plassere informasjonen som beh�ves for oppstart av GNU/Linux.\n"
#~ "\n"
#~ "Med mindre du vet akkurat hva du gj�r, velg \"F�rste sektor av\n"
#~ "disken (MBR)\"."

#~ msgid ""
#~ "DrakX generally detects the number of buttons your mouse possesses. If "
#~ "not,\n"
#~ "it assumes you have a two-button mouse and will set it up for third-"
#~ "button\n"
#~ "emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
#~ "USB mouse.\n"
#~ "\n"
#~ "If you wish to specify a different type of mouse, select the appropriate\n"
#~ "type from the provided list.\n"
#~ "\n"
#~ "If you choose a mouse other than the default, a test screen will be\n"
#~ "displayed. Use the buttons and wheel to verify that the settings are\n"
#~ "correct. If the mouse is not working well, press the space bar or "
#~ "[Return]\n"
#~ "to \"Cancel\" and choose again.\n"
#~ "\n"
#~ "Sometimes, wheel mouses are not automatically detected. You will need to\n"
#~ "manually select it in the list. Be sure to select the one corresponding "
#~ "to\n"
#~ "the correct port it is attached to. After you have pressed the \"OK\"\n"
#~ "button, a mouse image will be displayed. You then need to move the wheel "
#~ "of\n"
#~ "your mouse to activate it correctly. Then test that all buttons and\n"
#~ "movements are correct."
#~ msgstr ""
#~ "DrakX oppdager vanligvis antall knapper p� musen din. Hvis ikke, s� vil "
#~ "den\n"
#~ "anta at du har en to-knappers mus og vil sette opp treknappers-"
#~ "emulering.\n"
#~ "DrakX vil automatisk oppdage om du har en PS/2, seriell eller USB mus.\n"
#~ "\n"
#~ "Hvis du �nsker � spesifisere en annerledes musetype, velg den passende "
#~ "typen fra\n"
#~ "listen du blir vist.\n"
#~ "\n"
#~ "Hvis du velger en annen mus enn hva som er forh�ndsvalgt, s� vil en "
#~ "testskjerm bli vist.\n"
#~ "Bruk knappene og musehjulet for � sjekke at oppsettet er riktig. Hvis "
#~ "musa ikke virker ordentlig,\n"
#~ "trykk [Space] eller [Enter] for � \"avbryte\" og velge p� nytt.\n"
#~ "\n"
#~ "Noen ganger s� blir ikke musehjulet automatisk oppdaget. Du vil da m�tte "
#~ "velge\n"
#~ "manuelt fra listen. V�r sikker p� at du velger en som er p� riktig port. "
#~ "Etter at du har\n"
#~ "klikket p� \"OK\" knappen, s� vil et musebilde bli vist. Du m� da bevege "
#~ "musehjulet for\n"
#~ "� aktivere det riktig. S� sjekk om at alle knappene og bevegelsene er "
#~ "riktig."

#~ msgid "Please be patient. This operation can take several minutes."
#~ msgstr "V�r t�lmodig. Denne operasjonen kan ta flere minutter."

#~ msgid ""
#~ "Finally, depending on whether or not you chose to be able to select\n"
#~ "individual packages, you will be presented a tree containing all "
#~ "packages\n"
#~ "classified by groups and subgroups. While browsing the tree, you can "
#~ "select\n"
#~ "entire groups, subgroups, or individual packages.\n"
#~ "\n"
#~ "Whenever you select a package on the tree, a description appears on the\n"
#~ "right. When your selection is finished, click the \"Install\" button "
#~ "which\n"
#~ "will then launch the installation process. Depending on the speed of "
#~ "your\n"
#~ "hardware and the number of packages that need to be installed, it may "
#~ "take\n"
#~ "a while to complete the process. An installation time estimate is "
#~ "displayed\n"
#~ "on the screen, to help you gauge if there is sufficient time to enjoy a "
#~ "cup\n"
#~ "of coffee.\n"
#~ "\n"
#~ "!! If a server package has been selected, either intentionally or "
#~ "because\n"
#~ "it was part of a whole group, you will be asked to confirm that you "
#~ "really\n"
#~ "want those servers to be installed. Under Mandrake Linux, any installed\n"
#~ "servers are started by default at boot time. Even if they are safe and "
#~ "have\n"
#~ "no known issues at the time the distribution was shipped, it may happen\n"
#~ "that security holes are discovered after this version of Mandrake Linux "
#~ "was\n"
#~ "finalized. If you do not know what a particular service is supposed to "
#~ "do\n"
#~ "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
#~ "install the listed services and they will be started automatically by\n"
#~ "default. !!\n"
#~ "\n"
#~ "The \"Automatic dependencies\" option simply disables the warning dialog\n"
#~ "which appears whenever the installer automatically selects a package. "
#~ "This\n"
#~ "occurs because it has determined that it needs to satisfy a dependency "
#~ "with\n"
#~ "another package in order to successfully complete the installation.\n"
#~ "\n"
#~ "The tiny floppy disk icon at the bottom of the list allows to load the\n"
#~ "package list chosen during a previous installation. Clicking on this "
#~ "icon\n"
#~ "will ask you to insert a floppy disk previously created at the end of\n"
#~ "another installation. See the second tip of the previous step on how to\n"
#~ "create such a floppy disk."
#~ msgstr ""
#~ "Til slutt, avhengig av ditt valg av om du vil velge enkeltpakker eller\n"
#~ "ikke, s� vil du f� se ett tre som inneholder alle pakkene sortert p� "
#~ "grupper\n"
#~ "og undergrupper. N�r du surfer gjennom treet, kan du velge grupper, \n"
#~ "undergrupper eller individuelle pakker.\n"
#~ "\n"
#~ "N�r du velger en pakke i treet, vil en beskrivelse dukke opp til h�yre. \n"
#~ "N�r du er ferdig med � velge, klikk \"Installer\" knappen som da vil "
#~ "starte\n"
#~ "installasjonsprosessen. Avhengig av hastigheten p� din maskin, og antall\n"
#~ "pakker som skal installeres, kan det ta en stund � gj�re ferdig "
#~ "installasjonen.\n"
#~ "Ett estimat p� hvor lang tid det vil ta vises p� skjermen for � hjelpe "
#~ "deg �\n"
#~ "avgj�re om du har tid til en kopp kaffe.\n"
#~ "\n"
#~ "!! Hvis en tjenerpakke har blitt valgt, vil du bli bedt om � bekrefte at "
#~ "du �nsker\n"
#~ "� installere denne. Under Mandrake Linux vil alle installerte tjenere "
#~ "bli \n"
#~ "startet ved oppstart. Selv om de er sikre og ikke har noen kjente "
#~ "sikkerhetshull\n"
#~ "n�r denne distribusjonen ble sluppet, s� kan det v�re at sikkerhetshull "
#~ "ble \n"
#~ "oppdaget etter at denne versjonen av Mandrake Linux ble sluppet. Hvis du\n"
#~ "ikke vet hva en type tjene gj�r, eller hvorfor den blir installert, klikk "
#~ "\"Nei\".\n"
#~ "\"Ja\" vil installere tjeneren(e) og de(n) vil bli started automatisk som "
#~ "standard.\n"
#~ "\n"
#~ "\"Automatiske avhengigheter\" valget bare fjerner advarselsdialogboksen "
#~ "som\n"
#~ "kommer n�r installasjonsprogrammet automatisk velger en pakke. Dette "
#~ "skjer fordi\n"
#~ "den har funnet ut at den m� tilfredsstille en avhengighet med en annen "
#~ "pakke for\n"
#~ "� fullstendig gjennomf�re installasjonen.\n"
#~ "\n"
#~ "Det lille diskettikonet p� bunnen av listen lar deg laste pakkelisten som "
#~ "du valgte\n"
#~ "under en tidligere installasjon. N�r du klikker p� dette ikonet vil du "
#~ "bli bedt om �\n"
#~ "sette inn disketten som ble laget under avslutningen av en annen "
#~ "installasjon. Se\n"
#~ "det andre tipset for det siste skrittet for hvordan lage en slik diskett."

#~ msgid ""
#~ "Listed above are the existing Linux partitions detected on your hard "
#~ "drive.\n"
#~ "You can keep the choices made by the wizard, they are good for most "
#~ "common\n"
#~ "installations. If you make any changes, you must at least define a root\n"
#~ "partition (\"/\"). Do not choose too small a partition or you will not "
#~ "be\n"
#~ "able to install enough software. If you want to store your data on a\n"
#~ "separate partition, you will also need to create a \"/home\" partition\n"
#~ "(only possible if you have more than one Linux partition available).\n"
#~ "\n"
#~ "Each partition is listed as follows: \"Name\", \"Capacity\".\n"
#~ "\n"
#~ "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
#~ "\"partition number\" (for example, \"hda1\").\n"
#~ "\n"
#~ "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive "
#~ "and\n"
#~ "\"sd\" if it is a SCSI hard drive.\n"
#~ "\n"
#~ "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
#~ "hard drives:\n"
#~ "\n"
#~ " * \"a\" means \"master hard drive on the primary IDE controller\";\n"
#~ "\n"
#~ " * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
#~ "\n"
#~ " * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
#~ "\n"
#~ " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
#~ "\n"
#~ "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
#~ "\"second lowest SCSI ID\", etc."
#~ msgstr ""
#~ "Ovenfor nevnes de eksisterende Linux partisjonene oppdaget p�\n"
#~ "harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode "
#~ "for vanlig\n"
#~ "bruk. Du kan endre disse valgene, du m� i hvertfall definere en root\n"
#~ "partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke "
#~ "kunne\n"
#~ "installere nok programvare. Hvis du �nsker � lagre dine data p� en "
#~ "separat partisjon\n"
#~ "m� du ogs� velge en \"/home\" (bare mulig hvis du har mer enn en\n"
#~ "Linux partisjon tilgjengelig).\n"
#~ "\n"
#~ "\n"
#~ "For informasjon, hver partisjon er listet som f�lger: \"Navn\", "
#~ "\"Kapasitet\".\n"
#~ "\n"
#~ "\n"
#~ "\"Navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
#~ "\"partisjon nummer\" (f.eks., \"hda1\").\n"
#~ "\n"
#~ "\n"
#~ "\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
#~ "\"\n"
#~ "hvis den er en SCSI harddisk.\n"
#~ "\n"
#~ "\n"
#~ "\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
#~ "IDE harddisker:\n"
#~ "\n"
#~ "   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
#~ "\n"
#~ "   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
#~ "\n"
#~ "   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
#~ "\n"
#~ "   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
#~ "\n"
#~ "\n"
#~ "Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
#~ "\"sekund�r harddisk\", etc..."

#~ msgid ""
#~ "GNU/Linux is a multiuser system, and this means that each user can have "
#~ "his\n"
#~ "own preferences, his own files and so on. You can read the ``User "
#~ "Guide''\n"
#~ "to learn more this concept. But unlike \"root\", which is the\n"
#~ "administrator, the users you add here will not be entitled to change\n"
#~ "anything except their own files and their own configurations. You will "
#~ "have\n"
#~ "to create at least one regular user for yourself. That account is where "
#~ "you\n"
#~ "should log in for routine use. Although it is very practical to log in "
#~ "as\n"
#~ "\"root\" everyday, it may also be very dangerous! The slightest mistake\n"
#~ "could mean that your system would not work any more. If you make a "
#~ "serious\n"
#~ "mistake as a regular user, you may only lose some information, but not "
#~ "the\n"
#~ "entire system.\n"
#~ "\n"
#~ "First, you have to enter your real name. This is not mandatory, of "
#~ "course\n"
#~ "-- as you can actually enter whatever you want. DrakX will then take the\n"
#~ "first word you have entered in the box and will bring it over to the "
#~ "\"User\n"
#~ "name\". This is the name this particular user will use to log onto the\n"
#~ "system. You can change it. You then have to enter a password here. A\n"
#~ "non-privileged (regular) user's password is not as crucial as the \"root"
#~ "\"\n"
#~ "one from a security point of view, but that is no reason to neglect it:\n"
#~ "after all, your files are at risk.\n"
#~ "\n"
#~ "If you click on \"Accept user\", you can then add as many as you want. "
#~ "Add\n"
#~ "a user for each one of the people meant to use that computer. When you "
#~ "are\n"
#~ "finish adding all the users you want, select \"Done\".\n"
#~ "\n"
#~ "Clicking the \"Advanced\" button allows you to change the default \"shell"
#~ "\"\n"
#~ "for that user (bash by default).\n"
#~ "\n"
#~ "When you are finished adding all users, you will be proposed to choose a\n"
#~ "user which can automatically log into the system when the computer boots\n"
#~ "up. If you are interested in that feature (and do not care much about "
#~ "local\n"
#~ "security), choose the desired user and window manager, then click \"Yes"
#~ "\".\n"
#~ "If you are not interested in this feature, click \"No\"."
#~ msgstr ""
#~ "GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha "
#~ "sine\n"
#~ "instillinger, sine egne filer osv. Du kan lese brukerguiden for � f� vite "
#~ "mer.\n"
#~ "Men i motsetning til root, som er administratoren, s� vil brukerene du "
#~ "legger til\n"
#~ "her ikke ha rett til � forandre noe annet enn deres egne filer "
#~ "ogkonfigurasjon.\n"
#~ "Du m� lage minst en bruker for deg selv.\n"
#~ "Denne kontoen b�r du bruke for all rutinebruk. Selv om det er praktisk � "
#~ "logge\n"
#~ "inn som root hver dag, kan deg ogs� v�re veldig farlig! Den minste feil "
#~ "kunne\n"
#~ "bety at systemet ditt ikke lenger virker. Hvis du gj�r en stor feil som "
#~ "en vanlig\n"
#~ "bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n"
#~ "\n"
#~ "F�rst m� du skrive inn ditt virkelige navn. Dette er ikke n�dvendig, da "
#~ "du kan\n"
#~ "skrive inn hva du vil. drakX vil ta det f�rste ordet du legger inn og "
#~ "foresl� det som\n"
#~ "brukernavn. Dette er det brukernavnet den brukeren vil bruke for � logge "
#~ "seg p�\n"
#~ "systemet. Du kan forandre det. Du m� legge inn ett passord her. En "
#~ "ikkepriviligert\n"
#~ "brukers passord er ikke s� viktig som root sitt sett i fra "
#~ "systemsikkerhetens side,\n"
#~ "men det er ingen grunn til ignorere det av den grunn, det er dine filer "
#~ "som er i \n"
#~ "faresonen.\n"
#~ "\n"
#~ "Hvis du klikker p� aksepter bruker kan du da legge til s� mange brukere "
#~ "som du\n"
#~ "vil. N�r du har lagt til alle de brukerene du �nsker, klikk p� ferdig.\n"
#~ "\n"
#~ "Ved � klikke p� avansert kan du forandre hvilket shell brukeren har som "
#~ "standard.\n"
#~ "(Det vanlige er bash)"

#~ msgid "Palestina"
#~ msgstr "Palestina"

#~ msgid "Jordania"
#~ msgstr "Jordan"

#~ msgid "Switching between ALSA and OSS help"
#~ msgstr "Endrer mellom ALSA og OSS hjelp"

#~ msgid ""
#~ "Scannerdrake was not able to detect your %s.\n"
#~ "Please select the device where your scanner is attached"
#~ msgstr ""
#~ "Scannerdrake var ikke i stand til � oppdage din %s.\n"
#~ "Vennligst velg enheten hvor scanneren din er tilkoblet"

#~ msgid "The %s is not known by this version of scannerdrake."
#~ msgstr "%s er ikke kjent av denne versjonen av scannerdrake."

#~ msgid "Detecting devices ..."
#~ msgstr "Finner enheter ..."

#~ msgid "Test ports"
#~ msgstr "Test porter"

#~ msgid "http://www.mandrakelinux.com/en/90errata.php3"
#~ msgstr "http://www.mandrakelinux.com/en/90errata.php3"

#~ msgid "Formatting partitions"
#~ msgstr "Formaterer partisjoner"

#~ msgid ""
#~ "Your system support multiple head configuration.\n"
#~ "What do you want to do?"
#~ msgstr ""
#~ "Systemet ditt st�tter konfigurasjon for flere hoder.\n"
#~ "Hva �nsker du � gj�re?"

#~ msgid "FAT"
#~ msgstr "FAT"

#~ msgid "Formatting loopback file %s"
#~ msgstr "Formaterer loopback-fil %s"

#~ msgid "Formatting"
#~ msgstr "Formatering"

#~ msgid "The network needs to be restarted"
#~ msgstr "Nettverket m� startes p� nytt"

#~ msgid "(bootp/dhcp)"
#~ msgstr "(bootp/dhcp)"

#~ msgid "You don't have enough free space on your Windows partition"
#~ msgstr "Du har ikke nok ledig plass p� Windows partisjonen din"

#~ msgid "/_Help..."
#~ msgstr "/_Hjelp..."

#~ msgid "Do you really want to leave the installation?"
#~ msgstr "�nsker du virkelig � forlate installasjonen?"

#~ msgid "Tamil (Unicode)"
#~ msgstr "Tamilsk (Unicode)"

#~ msgid "Setup filesystems"
#~ msgstr "Oppsett filsystemer"

#~ msgid "Boot from DOS/Windows (loadlin)"
#~ msgstr "Start fra DOS/Windows (loadlin)"

#~ msgid "Remove entry"
#~ msgstr "Fjern inngang"

#~ msgid "Desktop"
#~ msgstr "Skrivebord"

#~ msgid "Start Menu"
#~ msgstr "Startmeny"

#~ msgid ""
#~ "The \"%s\" driver for your sound card is unlisted\n"
#~ "\n"
#~ "Please send the output of the \"lspcidrake -v\" command to\n"
#~ "<install at mandrakesoft dot com>\n"
#~ "with subject: unlisted sound driver \"%s\""
#~ msgstr ""
#~ "\"%s\" driveren for lydkortet ditt er ikke listet\n"
#~ "\n"
#~ "Vennligst send utskrift av \"lspcidrake -v\" kommandoen til\n"
#~ "<install at mandrakesoft dot com>\n"
#~ "med subject: unlisted sound driver \"%s\""

#~ msgid "You must have a swap partition"
#~ msgstr "Du m� ha en vekslingspartisjon"

#~ msgid "Install Class"
#~ msgstr "Installeringsklasse"

#~ msgid "Please choose one of the following classes of installation:"
#~ msgstr "Vennligst velg en av f�lgende installasjonsklasser:"

#~ msgid "Which installation class do you want?"
#~ msgstr "Hvilken installasjonsklasse �nsker du?"

#~ msgid "Recommended"
#~ msgstr "Anbefalt"

#~ msgid "Expert"
#~ msgstr "Ekspert"

#~ msgid "Upgrade packages only"
#~ msgstr "Oppgrader kun pakker"

#~ msgid "No root partition found to perform an upgrade"
#~ msgstr "Ingen rotpartisjon funnet for oppgradering"

#~ msgid "Root Partition"
#~ msgstr "Rotpartisjon"

#~ msgid "What is the root partition (/) of your system?"
#~ msgstr "Hva er rotpartisjonen (/) p� ditt system?"

#~ msgid "ISDN card"
#~ msgstr "ISDN-kort"

#~ msgid "Specify CUPS server"
#~ msgstr "Spesifiser CUPS tjener"

#~ msgid ""
#~ "\n"
#~ "Normally, CUPS is automatically configured according to your network "
#~ "environment, so that you can access the printers on the CUPS servers in "
#~ "your local network. If this does not work correctly, turn off \"Automatic "
#~ "CUPS configuration\" and edit your file /etc/cups/cupsd.conf manually. Do "
#~ "not forget to restart CUPS afterwards (command: \"service cups restart\")."
#~ msgstr ""
#~ "\n"
#~ "Normalt er CUPS konfigurert automatisk ihht. til nettverksmilj�et ditt, "
#~ "s� du kan ha tilgang til skrivere p� CUPS-tjenerene i ditt lokale "
#~ "nettverk. Hvis dette ikke virker ordentlig, skru av \"Automatic CUPS "
#~ "configuration\" og rediger filen /etc/cups/cupsd.conf manuelt. Ikke glem "
#~ "� starte CUPS p� nytt etterp� (kommando: \"service cups restart\")."

#~ msgid "The IP address should look like 192.168.1.20"
#~ msgstr "IP-adresse b�r v�re i format 1.2.3.4"

#~ msgid "CUPS server IP"
#~ msgstr "CUPS tjener IP"

#~ msgid "can not open /etc/inittab for reading: %s"
#~ msgstr "kan ikke �pne /etc/inittab for lesing: %s"

#~ msgid ""
#~ "You now have the opportunity to download encryption software.\n"
#~ "\n"
#~ "WARNING:\n"
#~ "\n"
#~ "Due to different general requirements applicable to these software and "
#~ "imposed\n"
#~ "by various jurisdictions, customer and/or end user of theses software "
#~ "should\n"
#~ "ensure that the laws of his/their jurisdiction allow him/them to "
#~ "download, stock\n"
#~ "and/or use these software.\n"
#~ "\n"
#~ "In addition customer and/or end user shall particularly be aware to not "
#~ "infringe\n"
#~ "the laws of his/their jurisdiction. Should customer and/or end user not\n"
#~ "respect the provision of these applicable laws, he/they will incure "
#~ "serious\n"
#~ "sanctions.\n"
#~ "\n"
#~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
#~ "liable\n"
#~ "for special, indirect or incidental damages whatsoever (including, but "
#~ "not\n"
#~ "limited to loss of profits, business interruption, loss of commercial "
#~ "data and\n"
#~ "other pecuniary losses, and eventual liabilities and indemnification to "
#~ "be paid\n"
#~ "pursuant to a court decision) arising out of use, possession, or the "
#~ "sole\n"
#~ "downloading of these software, to which customer and/or end user could\n"
#~ "eventually have access after having sign up the present agreement.\n"
#~ "\n"
#~ "\n"
#~ "For any queries relating to these agreement, please contact \n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"
#~ msgstr ""
#~ "Du har n� mulighet til � laste ned programvare for kryptering.\n"
#~ "\n"
#~ "ADVARSEL:\n"
#~ "\n"
#~ "Pga. forskjellige krav som er tillagt denne programvaren og p�lagt av "
#~ "forskjellige\n"
#~ "myndigheter, b�r kunde og/eller sluttbruker av denne programvaren "
#~ "forsikre seg\n"
#~ "om at lovene i sin/deres jurisdiksjon tillater han/dem � laste ned, ha i "
#~ "besittelse\n"
#~ "og/eller bruke denne programvaren.\n"
#~ "\n"
#~ "I tillegg skal kunde og/eller sluttbruker spesielt v�re oppmerksom p� � "
#~ "ikke bryte\n"
#~ "lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n"
#~ "respektere bestemmelsene av disse lovene, vil han/de p�dra seg alvorlige\n"
#~ "sanksjoner.\n"
#~ "\n"
#~ "Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter "
#~ "og/eller\n"
#~ "leverand�rer bli holdt ansvarlige for s�rskilte, indirekte eller "
#~ "tilfeldige\n"
#~ "skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap "
#~ "av fortjeneste,\n"
#~ "forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og "
#~ "endelige\n"
#~ "ansvarsforhold og erstatninger som skal betales if�lge en rettslig\n"
#~ "avgj�relse) oppst� ut av bruk, besittelse, eller ene og alene "
#~ "nedlastingen\n"
#~ "av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n"
#~ "tilgang til etter � ha sagt seg enig i og undertegnet fremviste avtale.\n"
#~ "\n"
#~ "For sp�rsm�l ang�ende denne avtalen, vennligst kontakt \n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"

#~ msgid "Proxy configuration"
#~ msgstr "Proxy-konfigurasjon"

#~ msgid ""
#~ "Welcome to the proxy configuration utility.\n"
#~ "\n"
#~ "Here, you'll be able to set up your http and ftp proxies\n"
#~ "with or without login and password\n"
#~ msgstr ""
#~ "Velkommen til proxy-konfigurasjonsverkt�yet.\n"
#~ "\n"
#~ "Her kan du sette opp dine http og ftp proxier\n"
#~ "med eller uten brukernavn og passord\n"

#~ msgid ""
#~ "Please fill in the http proxy informations\n"
#~ "Leave it blank if you don't want an http proxy"
#~ msgstr ""
#~ "Vennligst fill ut med http proxy informasjon\n"
#~ "La feltet v�re hvis du ikke �nsker en http proxy"

#~ msgid "URL"
#~ msgstr "URL"

#~ msgid "port"
#~ msgstr "port"

#~ msgid "URL should begin with 'http:'"
#~ msgstr "URLen b�r begynne med \"http:\""

#~ msgid "The port part should be numeric"
#~ msgstr "Portnummer burde v�re numerisk"

#~ msgid ""
#~ "Please fill in the ftp proxy informations\n"
#~ "Leave it blank if you don't want an ftp proxy"
#~ msgstr ""
#~ "Vennligst fyll ut ftp-proxy informasjonen-nLa feltet v�re hvis du ikke "
#~ "�nsker en ftp-proxy"

#~ msgid ""
#~ "Please enter proxy login and password, if any.\n"
#~ "Leave it blank if you don't want login/passwd"
#~ msgstr ""
#~ "Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n"
#~ "La det v�re hvis du ikke �nsker brukernavn/passord"

#~ msgid "login"
#~ msgstr "brukernavn"

#~ msgid "password"
#~ msgstr "passord"

#~ msgid "re-type password"
#~ msgstr "skriv inn passord p� nytt"

#~ msgid "The passwords don't match. Try again!"
#~ msgstr "Passordene stemmer ikke overens. Pr�v igjen!"

#~ msgid "Can't write file %s"
#~ msgstr "Kan ikke skrive fil %s"

#~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
#~ msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"

#~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
#~ msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"

#~ msgid "no help implemented yet.\n"
#~ msgstr "ingen hjelp implementert enn�.\n"

#~ msgid "Please click on a medium"
#~ msgstr "Vennligst klikk p� ett media"

#~ msgid "Removing LPRng..."
#~ msgstr "Fjerner LPRng..."

#~ msgid "usage: drakfloppy\n"
#~ msgstr "bruk: drakfloppy\n"

#~ msgid "usage: keyboarddrake [--expert] [keyboard]\n"
#~ msgstr "bruk: keyboarddrake [--expert] [tastatur]\n"

#~ msgid "Probing %s class\n"
#~ msgstr "S�ker %s klasse\n"

#~ msgid "detected on interface %s"
#~ msgstr "oppdaget p� grensesnitt %s"

#~ msgid "unable to backup lilo message"
#~ msgstr "kan ikke ta backup av lilo beskjed"

#~ msgid "can't change lilo message"
#~ msgstr "kan ikke endre lilo beskjed"