# Translation file of Mandrake graphic install # Copyright (C) 1999 Mandrakesoft # Terje Bjerkelia , 1999 # msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 1999-12-16 17:33+0100\n" "PO-Revision-Date: 1999-08-25 11:07+0200\n" "Last-Translator: Terje Bjerkelia \n" "Language-Team: norwegian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-1\n" "Content-Transfer-Encoding: 8bit\n" #: ../Xconfigurator.pm_.c:158 msgid "Select a graphic card" msgstr "Velg et grafikk-kort" #: ../Xconfigurator.pm_.c:159 msgid "Choose a X server" msgstr "Velg en X-tjener" #: ../Xconfigurator.pm_.c:178 msgid "Select the memory size of your graphic card" msgstr "Velg minnestørrelsen til grafikk-kortet ditt" #: ../Xconfigurator.pm_.c:200 msgid "Choose options for server" msgstr "Velg opsjoner for tjener" #: ../Xconfigurator.pm_.c:218 msgid "Choose a monitor" msgstr "Velg en monitor" #: ../Xconfigurator.pm_.c:221 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "De to kritiske parameterene er den vertikale oppfrisknings-raten, som er " "raten\n" "som som oppfrisker hele skjermen, og mest viktig den horisontale \n" "sync-raten, som er raten som scanlinjer blir vist på.\n" "\n" "Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- " "område\n" "som er utenfor det monitoren din er i stand til å klare: Du kan skade " "skjermen din.\n" "Hvis du er usikker, velg en konservativ innstilling." #: ../Xconfigurator.pm_.c:228 msgid "Horizontal refresh rate" msgstr "Horisontal oppfrisknings-rate" #: ../Xconfigurator.pm_.c:228 msgid "Vertical refresh rate" msgstr "Vertikal oppfrisknings-rate" #: ../Xconfigurator.pm_.c:269 msgid "Monitor not configured" msgstr "Monitor er ikke konfigurert" #: ../Xconfigurator.pm_.c:272 msgid "Graphic card not configured yet" msgstr "Grafikk-kort er ikke konfigurert ennå" #: ../Xconfigurator.pm_.c:275 msgid "Resolutions not chosen yet" msgstr "Oppløsninger er ikke valgt ennå" #: ../Xconfigurator.pm_.c:284 msgid "Do you want to test the configuration?" msgstr "Vil du teste konfigurasjonen?" #: ../Xconfigurator.pm_.c:284 msgid "Test configuration" msgstr "Test konfigurasjon" #: ../Xconfigurator.pm_.c:317 msgid "An error occurred:" msgstr "En feil oppsto:" #: ../Xconfigurator.pm_.c:319 msgid "" "\n" "try changing some parameters" msgstr "" "\n" "prøv å endre noen parametere" #: ../Xconfigurator.pm_.c:340 #, c-format msgid "(leaving in %d seconds)" msgstr "(slutter om %d sekunder)" #: ../Xconfigurator.pm_.c:344 ../my_gtk.pm_.c:423 ../printerdrake.pm_.c:256 msgid "Is this correct?" msgstr "Er dette riktig?" #: ../Xconfigurator.pm_.c:352 msgid "An error occurred, try changing some parameters" msgstr "En feil oppsto, prøv å endre noen parametere" #: ../Xconfigurator.pm_.c:360 ../Xconfigurator.pm_.c:525 msgid "Automatic resolutions" msgstr "Automatiske oppløsninger" #: ../Xconfigurator.pm_.c:361 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" "For å finne tilgjengelige oppløsninger vil jeg prøve forskjellige.\n" "Skjermen din vil blinke...\n" "Du kan slå av hvis du vil, du vil høre et bipp når det er ferdig" #: ../Xconfigurator.pm_.c:412 ../printerdrake.pm_.c:210 msgid "Resolution" msgstr "Oppløsning" #: ../Xconfigurator.pm_.c:447 msgid "Choose resolution and color depth" msgstr "Velg oppløsning og fargedybde" #: ../Xconfigurator.pm_.c:455 msgid "Show all" msgstr "Vis alle" #: ../Xconfigurator.pm_.c:526 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" "Jeg kan forsøke å finne tilgjengelige oppløsninger (f.eks: 800x600).\n" "Noen ganger kan dette forårsake at maskinen stopper opp.\n" "Ønsker du å prøve?" #: ../Xconfigurator.pm_.c:531 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" "Ingen gyldige modus funnet\n" "Prøv med et annet skjermkort eller monitor" #: ../Xconfigurator.pm_.c:723 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tastatur-oppsett: %s\n" #: ../Xconfigurator.pm_.c:724 #, c-format msgid "Mouse type: %s\n" msgstr "Type mus: %s\n" #: ../Xconfigurator.pm_.c:725 #, c-format msgid "Mouse device: %s\n" msgstr "Enhet mus: %s\n" #: ../Xconfigurator.pm_.c:726 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../Xconfigurator.pm_.c:727 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitor HorizSync: %s\n" #: ../Xconfigurator.pm_.c:728 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitor VertRefresh: %s\n" #: ../Xconfigurator.pm_.c:729 #, c-format msgid "Graphic card: %s\n" msgstr "Grafikk-kort: %s\n" #: ../Xconfigurator.pm_.c:730 #, c-format msgid "Graphic memory: %s kB\n" msgstr "Minne grafikk: %s kB\n" #: ../Xconfigurator.pm_.c:731 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86-tjener: %s\n" #: ../Xconfigurator.pm_.c:745 msgid "Preparing X-Window configuration" msgstr "Forbereder X-Window konfigurasjon" #: ../Xconfigurator.pm_.c:759 msgid "Change Monitor" msgstr "Endre monitor" #: ../Xconfigurator.pm_.c:760 msgid "Change Graphic card" msgstr "Endre grafikk-kort" #: ../Xconfigurator.pm_.c:761 msgid "Change Server options" msgstr "Endre tjeneropsjoner" #: ../Xconfigurator.pm_.c:762 msgid "Change Resolution" msgstr "Endre oppløsning" #: ../Xconfigurator.pm_.c:763 msgid "Automatical resolutions search" msgstr "Automatisk oppløsningssøk" #: ../Xconfigurator.pm_.c:767 msgid "Show information" msgstr "Vis informasjon" #: ../Xconfigurator.pm_.c:768 msgid "Test again" msgstr "Test igjen" #: ../Xconfigurator.pm_.c:769 msgid "Quit" msgstr "Avslutt" #: ../Xconfigurator.pm_.c:772 msgid "What do you want to do?" msgstr "Hva vil du gjøre?" #: ../Xconfigurator.pm_.c:781 msgid "Please relog into KDE to activate the changes" msgstr "Vennligst logg inn i KDE på nytt for å aktivere endringene" #: ../Xconfigurator.pm_.c:789 msgid "X at startup" msgstr "X ved oppstart" #: ../Xconfigurator.pm_.c:790 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" "Jeg kan sette opp maskinen din til å automatisk starte X ved oppstart.\n" "Vil du at X skal starte når du starter maskinen på nytt?" #: ../Xconfigurator_consts.pm_.c:4 msgid "256 colors (8 bits)" msgstr "256 farger (8 bits)" #: ../Xconfigurator_consts.pm_.c:5 msgid "32 thousand colors (15 bits)" msgstr "32 tusen farger (15 bits)" #: ../Xconfigurator_consts.pm_.c:6 msgid "65 thousand colors (16 bits)" msgstr "65 tusen farger (16 bits)" #: ../Xconfigurator_consts.pm_.c:7 msgid "16 million colors (24 bits)" msgstr "16 millioner farger (24 bits)" #: ../Xconfigurator_consts.pm_.c:8 msgid "4 billion colors (32 bits)" msgstr "4 milliarder farger (32 bits)" #: ../Xconfigurator_consts.pm_.c:93 msgid "256 kB" msgstr "256 kB" #: ../Xconfigurator_consts.pm_.c:94 msgid "512 kB" msgstr "512 kB" #: ../Xconfigurator_consts.pm_.c:95 msgid "1 MB" msgstr "1 MB" #: ../Xconfigurator_consts.pm_.c:96 msgid "2 MB" msgstr "2 MB" #: ../Xconfigurator_consts.pm_.c:97 msgid "4 MB" msgstr "4 MB" #: ../Xconfigurator_consts.pm_.c:98 msgid "8 MB" msgstr "8 MB" #: ../Xconfigurator_consts.pm_.c:99 msgid "16 MB or more" msgstr "16 MB eller mer" #: ../Xconfigurator_consts.pm_.c:103 ../Xconfigurator_consts.pm_.c:104 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "Standard VGA, 640x480 ved 60 Hz" #: ../Xconfigurator_consts.pm_.c:105 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Super VGA 800x600 ved 56 Hz" #: ../Xconfigurator_consts.pm_.c:106 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)" #: ../Xconfigurator_consts.pm_.c:107 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz" #: ../Xconfigurator_consts.pm_.c:108 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Utvidet Super VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz" #: ../Xconfigurator_consts.pm_.c:109 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "Ikke-interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz" #: ../Xconfigurator_consts.pm_.c:110 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "Høyfrekvens SVGA, 1024x768 ved 70 Hz" #: ../Xconfigurator_consts.pm_.c:111 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "Flerfrekvens som kan klare 1280x1024 ved 60 Hz" #: ../Xconfigurator_consts.pm_.c:112 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "Flerfrekvens som kan klare 1280x1024 ved 74 Hz" #: ../Xconfigurator_consts.pm_.c:113 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "Flerfrekvens som kan klare 1280x1024 ved 76 Hz" #: ../Xconfigurator_consts.pm_.c:114 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "Monitor som kan klare 1600x1200 ved 70 Hz" #: ../Xconfigurator_consts.pm_.c:115 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "Monitor som kan klare 1600x1200 ved 76 Hz" #: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:367 msgid "Create" msgstr "Opprett" #: ../diskdrake.pm_.c:17 msgid "Unmount" msgstr "Demonter" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:369 msgid "Delete" msgstr "Slett" #: ../diskdrake.pm_.c:18 msgid "Format" msgstr "Formater" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:524 msgid "Resize" msgstr "Endre størrelse" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:411 msgid "Type" msgstr "Type" #: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:427 msgid "Mount point" msgstr "Monteringspunkt" #: ../diskdrake.pm_.c:33 msgid "Write /etc/fstab" msgstr "Skriv /etc/fstab" #: ../diskdrake.pm_.c:34 msgid "Toggle to expert mode" msgstr "Endre til ekspertmodus" #: ../diskdrake.pm_.c:35 msgid "Toggle to normal mode" msgstr "Endre til normalmodus" #: ../diskdrake.pm_.c:36 msgid "Restore from file" msgstr "Gjenopprett fra fil" #: ../diskdrake.pm_.c:37 msgid "Save in file" msgstr "Lagre i fil" #: ../diskdrake.pm_.c:38 msgid "Restore from floppy" msgstr "Gjenopprett fra diskett" #: ../diskdrake.pm_.c:39 msgid "Save on floppy" msgstr "Lagre på diskett" #: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:518 #: ../install_steps_interactive.pm_.c:636 ../standalone/adduserdrake_.c:26 msgid "Done" msgstr "Ferdig" #: ../diskdrake.pm_.c:43 msgid "Clear all" msgstr "Fjern alle" #: ../diskdrake.pm_.c:44 msgid "Format all" msgstr "Formater alle" #: ../diskdrake.pm_.c:45 msgid "Auto allocate" msgstr "Automatisk allokering" #: ../diskdrake.pm_.c:48 msgid "All primary partitions are used" msgstr "Alle primære partisjoner er i bruk" #: ../diskdrake.pm_.c:48 msgid "I can't add any more partition" msgstr "Jeg kan ikke legge til flere partisjoner" #: ../diskdrake.pm_.c:48 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "For å ha flere partisjoner vennligst slett en for å kunne opprette en " "utvidet partisjon" #: ../diskdrake.pm_.c:51 msgid "Rescue partition table" msgstr "Redde partisjonstabell" #: ../diskdrake.pm_.c:52 msgid "Undo" msgstr "Angre" #: ../diskdrake.pm_.c:53 msgid "Write partition table" msgstr "Skriv partisjonstabell" #: ../diskdrake.pm_.c:54 msgid "Reload" msgstr "Last igjen" #: ../diskdrake.pm_.c:98 msgid "Empty" msgstr "Tom" #: ../diskdrake.pm_.c:98 msgid "Ext2" msgstr "Ext2" #: ../diskdrake.pm_.c:98 msgid "FAT" msgstr "FAT" #: ../diskdrake.pm_.c:98 msgid "Other" msgstr "Andre" #: ../diskdrake.pm_.c:98 msgid "Swap" msgstr "Veksle" #: ../diskdrake.pm_.c:104 msgid "Filesystem types:" msgstr "Filsystemtype:" #: ../diskdrake.pm_.c:113 msgid "Details" msgstr "Detaljer" #: ../diskdrake.pm_.c:127 msgid "" "You have one big fat partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Du har en stor fat partisjon.\n" "Jeg forslår at du først endrer størrelsen på denne partisjonen\n" "(klikk på den, klikk så på \"Endre størrelse\")" #: ../diskdrake.pm_.c:131 msgid "Please make a backup of your data first" msgstr "" #: ../diskdrake.pm_.c:131 ../diskdrake.pm_.c:145 ../diskdrake.pm_.c:455 #: ../diskdrake.pm_.c:484 msgid "Read carefully!" msgstr "Les nøye!" #: ../diskdrake.pm_.c:145 #, c-format msgid "After %s partition %s," msgstr "Etter %s partisjon %s," #: ../diskdrake.pm_.c:145 msgid "all data on this partition will be lost" msgstr "alle data på denne partisjonen vil gå tapt" # #: ../install_steps_interactive.pm_.c:37 #: ../diskdrake.pm_.c:164 ../install_any.pm_.c:184 ../install_steps.pm_.c:67 #: ../install_steps_interactive.pm_.c:36 ../standalone/diskdrake_.c:60 msgid "Error" msgstr "Feil" #: ../diskdrake.pm_.c:188 ../diskdrake.pm_.c:607 msgid "Mount point: " msgstr "Monteringspunkt: " #: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:227 msgid "Device: " msgstr "Enhet: " #: ../diskdrake.pm_.c:190 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS diskbokstav: %s (bare en gjetning)\n" #: ../diskdrake.pm_.c:191 ../diskdrake.pm_.c:230 msgid "Type: " msgstr "Type: " #: ../diskdrake.pm_.c:192 #, c-format msgid "Start: sector %s\n" msgstr "Start: sektor %s\n" #: ../diskdrake.pm_.c:193 #, c-format msgid "Size: %s MB" msgstr "Størrelse: %s MB" #: ../diskdrake.pm_.c:195 #, c-format msgid ", %s sectors" msgstr ", %s sektorer" #: ../diskdrake.pm_.c:197 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "Sylinder %d til sylinder %d\n" #: ../diskdrake.pm_.c:198 msgid "Formatted\n" msgstr "Formatert\n" #: ../diskdrake.pm_.c:199 msgid "Not formatted\n" msgstr "Ikke formatert\n" #: ../diskdrake.pm_.c:200 msgid "Mounted\n" msgstr "Montert\n" #: ../diskdrake.pm_.c:201 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../diskdrake.pm_.c:202 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partisjon startet opp som standard\n" " (for MS-DOS oppstart, ikke for lilo)\n" #: ../diskdrake.pm_.c:204 #, c-format msgid "Level %s\n" msgstr "Nivå %s\n" #: ../diskdrake.pm_.c:205 #, c-format msgid "Chunk size %s\n" msgstr "Blokkstørrelse %s\n" #: ../diskdrake.pm_.c:206 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-disker %s\n" #: ../diskdrake.pm_.c:223 msgid "Please click on a partition" msgstr "Vennligst klikk på en partisjon" #: ../diskdrake.pm_.c:228 #, c-format msgid "Size: %d MB\n" msgstr "Størrelse: %d MB\n" #: ../diskdrake.pm_.c:229 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n" #: ../diskdrake.pm_.c:231 #, c-format msgid "on bus %d id %d\n" msgstr "på buss %d id %d\n" #: ../diskdrake.pm_.c:244 msgid "Mount" msgstr "Monter" #: ../diskdrake.pm_.c:245 msgid "Active" msgstr "Aktiv" #: ../diskdrake.pm_.c:246 msgid "Add to RAID" msgstr "Legg til RAID" #: ../diskdrake.pm_.c:247 msgid "Remove from RAID" msgstr "Fjern fra RAID" #: ../diskdrake.pm_.c:248 msgid "Modify RAID" msgstr "Modifiser RAID" #: ../diskdrake.pm_.c:255 msgid "Choose action" msgstr "Velg handling" #: ../diskdrake.pm_.c:346 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Beklager, jeg vil ikke tillate oppretting av /boot så lange inne på disken " "(på en sylinder > 1024).\n" "Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du " "trenger ikke /boot" #: ../diskdrake.pm_.c:350 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Partisjonen du valgte å legge til som root (/) er lokalisert fysisk " "bortenfor\n" "den 1024'de sylinderen på hard-disken, og du har ingen /boot partisjon.\n" "Hvis du skal bruke oppstartshåndtereren LILO, vær nøye med å legge til en\n" "/boot partisjon" #: ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:369 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../diskdrake.pm_.c:372 msgid "Use ``Unmount'' first" msgstr "" #: ../diskdrake.pm_.c:373 ../diskdrake.pm_.c:406 msgid "changing type of" msgstr "endrer type av" #: ../diskdrake.pm_.c:385 msgid "Continue anyway?" msgstr "Fortsette likevel?" #: ../diskdrake.pm_.c:390 msgid "Quit without saving" msgstr "Avslutt uten å lagre" #: ../diskdrake.pm_.c:390 msgid "Quit without writing the partition table?" msgstr "Avslutt uten å skrive partisjonstabellen?" #: ../diskdrake.pm_.c:409 msgid "Change partition type" msgstr "Endre partisjonstype" #: ../diskdrake.pm_.c:410 msgid "Which partition type do you want?" msgstr "Hvilken partisjonstype ønsker du?" #: ../diskdrake.pm_.c:426 #, c-format msgid "Where do you want to mount device %s?" msgstr "Hvor vil du montere %s enheten?" #: ../diskdrake.pm_.c:448 msgid "formatting" msgstr "formatering" #: ../diskdrake.pm_.c:450 msgid "Formatting" msgstr "Formatering" #: ../diskdrake.pm_.c:450 ../install_steps_interactive.pm_.c:210 #, c-format msgid "Formatting partition %s" msgstr "Formaterer partisjon %s" #: ../diskdrake.pm_.c:455 msgid "After formatting all partitions," msgstr "Etter formatering av alle partisjonene," #: ../diskdrake.pm_.c:455 msgid "all data on these partitions will be lost" msgstr "alle data på disse partisjonene vil gå tapt" #: ../diskdrake.pm_.c:465 msgid "Move" msgstr "Flytt" #: ../diskdrake.pm_.c:466 msgid "Which disk do you want to move to?" msgstr "Hvilken disk vil du flytte til?" #: ../diskdrake.pm_.c:470 msgid "Sector" msgstr "Sektor" #: ../diskdrake.pm_.c:471 msgid "Which sector do you want to move to?" msgstr "Hvilken sektor vil du flytte til?" #: ../diskdrake.pm_.c:474 msgid "Moving" msgstr "Flytter" #: ../diskdrake.pm_.c:474 msgid "Moving partition..." msgstr "Flytter partisjon..." #: ../diskdrake.pm_.c:484 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!" #: ../diskdrake.pm_.c:486 msgid "You'll need to reboot before the modification can take place" msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft" #: ../diskdrake.pm_.c:507 ../install_steps_gtk.pm_.c:254 msgid "Computing fat filesystem bounds" msgstr "Beregner fat filsystemgrense" #: ../diskdrake.pm_.c:507 ../diskdrake.pm_.c:552 #: ../install_steps_gtk.pm_.c:254 msgid "Resizing" msgstr "Endrer størrelse" #: ../diskdrake.pm_.c:521 msgid "resizing" msgstr "endrer størrelse" #: ../diskdrake.pm_.c:531 msgid "Choose the new size" msgstr "Velg den nye størrelsen" #: ../diskdrake.pm_.c:531 ../install_steps_graphical.pm_.c:287 #: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:327 #: ../install_steps_gtk.pm_.c:376 msgid "MB" msgstr "MB" #: ../diskdrake.pm_.c:584 msgid "Create a new partition" msgstr "Opprette en ny partisjon" #: ../diskdrake.pm_.c:600 msgid "Start sector: " msgstr "Start sektor: " #: ../diskdrake.pm_.c:603 msgid "Size in MB: " msgstr "Størrelse i MB: " #: ../diskdrake.pm_.c:606 msgid "Filesystem type: " msgstr "Filsystemtype: " #: ../diskdrake.pm_.c:608 msgid "Preference: " msgstr "Valg: " #: ../diskdrake.pm_.c:652 ../diskdrake.pm_.c:668 msgid "Select file" msgstr "Velg fil" #: ../diskdrake.pm_.c:661 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Sikkerhetskopien av partisjonstabellen har ikke samme størrelse\n" "Fortsette for det?" #: ../diskdrake.pm_.c:669 msgid "Warning" msgstr "Advarsel" #: ../diskdrake.pm_.c:670 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Sett inn en diskett i stasjonen\n" "Alle data på denne disketten vil gå tapt" #: ../diskdrake.pm_.c:684 msgid "Trying to rescue partition table" msgstr "Prøver å redde partisjonstabell" #: ../diskdrake.pm_.c:695 msgid "device" msgstr "enhet" #: ../diskdrake.pm_.c:696 msgid "level" msgstr "nivå" #: ../diskdrake.pm_.c:697 msgid "chunk size" msgstr "blokkstørrelse" #: ../diskdrake.pm_.c:709 msgid "Choose an existing RAID to add to" msgstr "Velg en eksisterende RAID for å legge til" #: ../diskdrake.pm_.c:710 msgid "new" msgstr "ny" #: ../fs.pm_.c:67 ../fs.pm_.c:73 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatering av %s mislykket" #: ../fs.pm_.c:93 #, c-format msgid "don't know how to format %s in type %s" msgstr "vet ikke hvordan formatere %s i type %s" #: ../fs.pm_.c:106 msgid "nfs mount failed" msgstr "nfs montering mislykket" #: ../fs.pm_.c:123 msgid "mount failed: " msgstr "montering mislykket: " #: ../fs.pm_.c:134 #, c-format msgid "error unmounting %s: %s" msgstr "feil ved demontering av %s: %s" #: ../fsedit.pm_.c:218 msgid "Mount points must begin with a leading /" msgstr "Monteringspunkter må begynne med /" #: ../fsedit.pm_.c:221 #, c-format msgid "There is already a partition with mount point %s" msgstr "Det finnes allerede en partisjon med monteringspunkt %s" #: ../fsedit.pm_.c:305 #, c-format msgid "Error opening %s for writing: %s" msgstr "Feil ved åpning av %s for skriving: %s" #: ../fsedit.pm_.c:387 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye " "filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet" #: ../fsedit.pm_.c:402 msgid "You don't have any partitions!" msgstr "Du har ingen partisjoner!" #: ../help.pm_.c:7 ../help.pm_.c:280 msgid "Choose preferred language for install and system usage." msgstr "Velg ønsket språk for installering og systembruk." #: ../help.pm_.c:10 ../help.pm_.c:283 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "Velg oppsettet som stemmer med tastaturet ditt fra listen ovenfor" #: ../help.pm_.c:13 msgid "" "Choose \"Install\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "\n" "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus) or 6.1 (Helios)." msgstr "" "Velg \"Installasjon\" hvis det ikke er installert noen tidligere versjoner\n" "av Linux, eller hvis du ønsker å bruke flere distribusjoner eller\n" "versjoner.\n" "\n" "\n" "Velg \"Oppdater\" hvis du ønsker å oppdatere en tidligere versjon av Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus) eller 6.1 (Helios)." #: ../help.pm_.c:21 msgid "" "Select:\n" "\n" " - Recommended: If you have never installed Linux before.\n" "\n" "\n" " - Customized: If you are familiar with Linux, you will be able to \n" "select the usage for the installed system between normal, development or\n" "server. Choose \"Normal\" for a general purpose installation of your\n" "computer. You may choose \"Development\" if you will be using the computer\n" "primarily for software development, or choose \"Server\" if you wish to\n" "install a general purpose server (for mail, printing...).\n" "\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you. You will\n" "be able to select the usage of your installed system as for \"Customized\"." msgstr "" "Velg:\n" "\n" " - Anbefalt: Hvis du ikke aldri har installert Linux før.\n" "\n" "\n" " - Egendefinert: Hvis du er kjent med Linux vil du for systemet som skal \n" "installeres kunne velge mellom normal, utvikling eller tjener. Velg " "\"Normal\"\n" "for installasjon for generelt bruk. Du kan velge \"Utvikling\" hvis du skal\n" "bruke maskinen primært for utvikling av programvare, eller velge \"Tjener\"\n" "hvis du ønsker å installere en tjener for generelt bruk (for post, " "utskrift...).\n" "\n" "\n" " - Ekspert: Hvis du allerede kjenner GNU/Linux godt og ønsker å gjøre en\n" "egendefinert installasjon så er dette installasjonsvalget for deg. Du vil\n" "kunne velge bruk av systemet som skal installeres som med \"Egendefinert\"." #: ../help.pm_.c:39 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "\n" "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" "doesn't know which driver to use for this card, or if you have no\n" "SCSI adapters at all, you will then be prompted on whether you have\n" "one or not. If you have none, answer \"No\". If you have one or more,\n" "answer \"Yes\". A list of drivers will then pop up, from which you\n" "will have to select one.\n" "\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from your documentation or from Windows (if you have it\n" "on your system), as suggested by the installation guide. These\n" "are the options you will need to provide to the driver." msgstr "" "DrakX vil først forsøke å se etter et eller flere PCI\n" "SCSI-adapter(ere). Hvis den finner det (eller dem) og vet hvilken\n" "driver(ere) som skal brukes, vil denne (disse) bli lagt inn automatisk.\n" "\n" "\n" "Hvis SCSI-adapteret ditt er ISA eller PCI, men DrakX ikke vet\n" "hvilken driver som skal brukes for dette kortet, eller hvis du ikke\n" "har noen SCSI-adapterere i det hele tatt, vil du bli spurt om du\n" "har noen eller ikke. Hvis du ikke har noen, svar \"Nei\". Hvis du\n" "har et eller fler, svar \"Ja\". En liste over drivere vil så komme\n" "opp, som du må velge en driver fra.\n" "\n" "\n" "Etter at du har valgt driveren vil DrakX spørre deg om du ønsker\n" "å spesifisere opsjonene for denne. Først, prøv å la driveren søke\n" "etter maskinvaren: Dette fungerer vanligvis fint.\n" "\n" "\n" "Hvis ikke, glem ikke informasjonen om maskinvaren din som du få fra\n" "dokumentasjonen din eller fra Windows (hvis du har denne på systemet ditt),\n" "som foreslått i installasjonsguiden. Dette er opsjonene du vil trenge å\n" "gi til driveren." #: ../help.pm_.c:63 msgid "" "At this point, you may choose what partition(s) to use to install\n" "your Linux-Mandrake system if they have been already defined (from a\n" "previous install of Linux or from another partitionning tool). In other\n" "cases, hard drive partitions must be defined. This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "If you have to create new partitions, use \"Auto allocate\" to " "automatically\n" "create partitions for Linux. You can select the disk for partitionning by\n" "clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced user. DiskDrake\n" "simplifies the process so that it need not be. Consult the documentation\n" "and take your time before proceeding." msgstr "" "På dette punktet kan du velge hvilken partisjon(er) som skal brukes til å\n" "installere Linux-Mandrake systemet ditt hvis de allerede har blitt definert\n" "(Fra en tidligere installasjon av Linux eller fra andre " "partisjoneringsverktøy).\n" "I andre tilfeller må harddisk-partisjoner definereres. Denne operasjonen\n" "innebærer å logisk dele maskinens harddisk-kapasitet inn i separate\n" "områder for bruk.\n" "\n" "\n" "Hvis du må opprette nye partisjoner, bruk \"Autoallokering\" til å opprette\n" "partisjoner automatisk for Linux. Du kan velge disken som skal " "partisjoneres\n" "ved å klikke på \"hda\" for den første IDE-disken,\n" "\"hdb\" for den andre eller \"sda\" for den første SCSI-disken osv.\n" "\n" "\n" "To vanlige partisjoner er: root-partisjonen (/) som er punktet hvor\n" "filsystemets katalogstruktur starter, og /boot, som inneholder alle\n" "filene som er nødvendige for å starte operativsystemet når datamaskinen\n" "blir slått på.\n" "\n" "\n" "Fordi effekten av denne prosessen vanligvis er ugjenkallelig kan\n" "partisjonering være både stressende og skremmende for uerfarne brukere.\n" "DiskDrake forenkler prosessen så den ikke trenger å være det. Les\n" "dokumentasjonen og ta deg god tid før du begynner." #: ../help.pm_.c:89 ../help.pm_.c:355 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" "Alle partisjonene som nylig har blitt definert må formateres for bruk\n" "(med formatering menes å opprette et filsystem). På dette punktet ønsker\n" "du kanskje å re-formatere noen allerede eksisterende partisjoner for å\n" "slette de data disse inneholder. Merk: det er ikke nødvendig å re-formatere\n" "eksisterende partisjoner, især hvis de inneholder filer eller data som du\n" "ønsker å beholde. Typiske å beholde er: /home og /usr/local." #: ../help.pm_.c:97 #, fuzzy msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "First you can select group of package to install or upgrade. After that\n" "you can select more packages according to the total size you wish to\n" "select.\n" "\n" "\n" "If you are in expert mode, you can select packages individually.\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the\n" "button \"Install\" to start the installation." msgstr "" "Du kan nå velge de pakkene du ønsker å installere.\n" "\n" "\n" "Først kan du velge størrelsen på det installerte systemet og en automatisk\n" "utvelgelse av pakker vil bli gjort i samsvar med din bruk av systemet. Etter " "dette kan du velge flere pakker etter gruppe eller klikke på Ok for å\n" "beholde tidligere valg.\n" "\n" "\n" "Hvis du er i ekspertmodus kan du velge pakker individuelt.\n" "Vennligst merk at noen pakker er avhengige av installasjon av andre pakker.\n" "Disse blir referert til som pakkeavhengigheter. Pakkene du velger, og\n" "pakkene disse trenger vil automatisk bli valgt for installering.\n" "Det er ikke mulig å installere en pakke uten å installere alle dens\n" "avhengigheter.\n" "\n" "\n" "Informasjon om hver kategori og spesifikke pakker er tilgjengelig i området\n" "kalt \"Info\", som du finner mellom listen over pakker og knappen\n" "\"Installer\" for å starte installasjonen." #: ../help.pm_.c:118 msgid "" "The packages selected are now being installed. This operation\n" "should take a few minutes unless you have chosen to upgrade an\n" "existing system, in that case it can take more time even before\n" "upgrade starts." msgstr "" "Pakkene som ble valgt blir nå installert. Denne operasjonen\n" "burde ta noen minutter hvis du ikke har valgt å oppgradere et\n" "eksisterende system. I så tilfelle kan det ta lengre tid også før\n" "oppgraderingen starter." #: ../help.pm_.c:124 ../help.pm_.c:384 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX' settings, just jump to the section\n" "you want by clicking on it in the menu on the left. Otherwise,\n" "choose a mouse type in the menu which you think is the closest\n" "match for your mouse.\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" "Hvis DrakX ikke klarte å finne musen din, eller hvis du ønsker\n" "å sjekke hva den har gjort, vil du bli presentert for listen over mus\n" "ovenfor.\n" "\n" "\n" "Hvis du godkjenner DrakX' innstillinger fortsett bare til den\n" "seksjonen du ønsker ved å klikke på den i menyen til venstre. Ellers,\n" "velg en musetype i menyen som du tror er nærmest den musen du har.\n" "\n" "Hvis du har en seriell mus, må du også fortelle DrakX hvilken\n" "serie-port den er koblet til." #: ../help.pm_.c:138 msgid "" "This section is dedicated to configuring a local area\n" "network (LAN) or a modem.\n" "\n" "Choose \"Local LAN\" and DrakX will\n" "try to find an Ethernet adapter on your machine. PCI adapters\n" "should be found and initialized automatically.\n" "However, if your peripheral is ISA, autodetection will not work,\n" "and you will have to choose a driver from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses.\n" "\n" "\n" "Choose \"Dialup with modem\" and the Internet connection with\n" "a modem will be configured. DrakX will try to find your modem,\n" "if it fails you will have to select the right serial port where\n" "your modem is connected to." msgstr "" "Denne seksjonen er dedikert til konfigurering av lokalt\n" "nettverk (LAN) eller et modem.\n" "\n" "Velg \"Lokalt LAN\" og DrakX vil\n" "prøve å finne et Ethernet-adapter i maskinen din. PCI-adaptere\n" "burde bli funnet og initialisert automatisk.\n" "Men, hvis kortet ditt er ISA vil ikke dette virke,\n" "og du må velge en driver fra listen som vil komme til syne.\n" "\n" "\n" "For SCSI-adaptere kan du la driveren søke etter adapteret første\n" "gangen, ellers må du spesifisere opsjonene for driveren som du\n" "har innhentet fra Windows sitt kontrollpanel.\n" "\n" "\n" "Hvis du installerer et Linux-Mandrake system på en maskin som er en del\n" "av et allerede eksisterende nettverk, vil nettverks-administratoren\n" "ha gitt deg all nødvendig informasjon (IP-adresse, nettverks-\n" "submask eller netmask, og vertsnavn). Hvis du f.eks. setter\n" "opp et privat nettverk hjemme, burde du velge adresser.\n" "\n" "\n" "Velg \"Oppringt med modem\" og Internett-tilknytningen med\n" "et modem vil bli konfigurert. DrakX vil prøve å finne modemet ditt,\n" "hvis dette mislykkes må du velge den riktige serieporten hvor\n" "modemet ditt er tilkoblet." #: ../help.pm_.c:168 msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "Note you have to select mirror and cryptographic according to your " "legislation." msgstr "" #: ../help.pm_.c:175 msgid "" "You can now select your timezone according to where you live.\n" "\n" "\n" "Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n" "in local time according to the time zone you have selected." msgstr "" "Du kan nå velge tidssone som stemmer overens med der du bor.\n" "\n" "\n" "Linux håndterer tid i GMT eller \"Greenwich Meridian Time\" og oversetter\n" "den til lokal tid som stemmer overens med den tidssonen du har valgt." # #: ../help.pm_.c:376 ../help.pm_.c:463 ../install2.pm_.c:65 #: ../help.pm_.c:182 ../help.pm_.c:420 ../help.pm_.c:423 ../help.pm_.c:511 #: ../install2.pm_.c:67 msgid "Help" msgstr "Hjelp" #: ../help.pm_.c:185 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" "Linux kan håndtere mange typer av skrivere. Hver av disse\n" "typene trenger forskjellige oppsett.\n" "\n" "\n" "Hvis skriveren din er direkte koblet til maskinen din, velg\n" "\"Lokal skriver\". Du må så fortelle hvilken port skriveren\n" "din er koblet til, og velge passende filter.\n" "\n" "\n" "Hvis du ønsker tilgang til en skriver lokalisert på en fjern Unix-maskin,\n" "må du velge \"Fjern-lpd\". For at dette skal virke trengs ikke bruker-\n" "navn eller passord, men du må vite navnet på skriverkøen på denne\n" "tjeneren.\n" "\n" "\n" "Hvis du ønsker tilgang en SMB-skriver (som betyr en skriver lokalisert\n" "på en fjern Windows 9x/NT maskin), må du spesifisere dens SMB-navn\n" "(som ikke er dens TCP/IP-navn), og muligens dens IP-adresse, pluss\n" "brukernavn, arbeidsgruppe og passord som behøves for å få tilgang til\n" "skriveren, og selvfølgelig navnet på skriveren. Det samme gjelder for\n" "en NetWare-skriver, med unntak av at du ikke trenger noen arbeidsgruppe-\n" "informasjon." #: ../help.pm_.c:208 msgid "" "You can now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" "Du kan nå entre root-passordet for Linux-Mandrake systemet ditt.\n" "Passordet må entres to ganger for å verifisere at begge passord-\n" "inntastingene er identiske.\n" "\n" "\n" "Root er administratoren av systemet, og er den eneste brukeren som\n" "har adgang til å modifisere systemkonfigurasjonen. Velg derfor dette\n" "passordet med forsiktighet! Ikke-autorisert bruk av root-kontoen kan\n" "være ekstremt farlig for integriteten til systemet, dataene det inneholder,\n" "og andre systemer tilkoblet dette. Passordet bør være en miks av\n" "alfanumeriske tegn og være minst åtte tegn langt. Passordet bør *aldri*\n" "bli skrevet ned. Ikke lag passordet for langt eller for komplisert:\n" "du må kunne klare å huske det." #: ../help.pm_.c:224 ../help.pm_.c:465 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"priviledged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" "Du kan nå opprette en eller flere \"vanlige\" brukerkontoer, som\n" "motsetning til den \"priviligerte\" brukerkontoen root. Du kan opprette\n" "en eller flere kontoer for hver person du vil skal ha tilgang til\n" "maskinen. Merk at hver brukerkonto vil ha sine egne valg (grafisk\n" "miljø, program-innstillinger, etc.) og sin egen \"hjemmekatalog\"\n" "hvor disse valgene er lagret.\n" "\n" "\n" "Først av alt, opprett en konto for deg selv! Selv om du vil være den eneste " "brukeren\n" "av maskinen, burde du IKKE logge inn som root for daglig bruk av systemet: " "det er en\n" "veldig stor sikkerhetsrisiko. Å gjøre systemet ubrukelig er veldig ofte bare " "en skrivefeil unna.\n" "\n" "\n" "Derfor burde du bare logge deg inn på systemet med brukerkontoen\n" "du vil ha opprettet her, og bare logge inn som root for administrasjon-\n" "og vedlikeholdsformål." #: ../help.pm_.c:243 ../help.pm_.c:484 msgid "" "Please, please, answer \"Yes\" here! Just for example, when you\n" "reinstall Windows, it will overwrite the boot sector. Unless you have\n" "made the bootdisk as suggested, you won't be able to boot into Linux\n" "any more!" msgstr "" "Vær så snill, bare svar \"Ja\" her! Som et eksempel, når du\n" "re-installerer Windows, vil denne overskrive oppstartsektoren. Hvis du\n" "ikke har opprettet oppstartsdisketten som foreslått, vil du ikke kunne\n" "starte Linux mer!" #: ../help.pm_.c:249 ../help.pm_.c:490 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" "Du må indikere hvor du ønsker å\n" "plassere informasjonen som behøves for oppstart av Linux.\n" "\n" "\n" "Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n" "disken (MBR)\"." #: ../help.pm_.c:257 ../help.pm_.c:498 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" "Det er nå tid for å konfigurere X-vindusystemet, som er kjernen\n" "til det grafiske brukergrensesnittet i Linux. For dette formålet\n" "må du konfigurere skjermkortet og monitoren din. De fleste av disse\n" "trinnene skjer automatisk, så det du trenger å gjøre er å\n" "verifisere hva som har blitt gjort og godkjenne innstillingene :)\n" "\n" "\n" "Når konfigureringen er over, vil X bli startet (hvis du ikke ber\n" "DrakX om å la det være) så du kan sjekke og se om innstillingene\n" "passer deg. Hvis de ikke gjør det, kan du komme tilbake og endre\n" "disse så mange ganger som det måtte behøves." #: ../help.pm_.c:270 msgid "You can now select some miscellaneous options for your system." msgstr "Du kan nå velge noen forskjellige opsjoner for systemet ditt." #: ../help.pm_.c:273 msgid "Exit Linux-Mandrake installation to reboot your system." msgstr "Avslutt Linux-Mandrake installasjonen for å starte systemet på nytt." #: ../help.pm_.c:286 msgid "" "Choose \"Installation\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "\n" "Choose \"Update\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)." msgstr "" "Velg \"Installasjon\" hvis det ikke er installert noen tidligere versjoner\n" "av Linux, eller hvis du ønsker å bruke flere distribusjoner eller\n" "versjoner.\n" "\n" "\n" "Velg \"Oppdater\" hvis du ønsker å oppdatere en tidligere versjon av\n" "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) eller 6.0 (Venus)." #: ../help.pm_.c:294 msgid "" "Select:\n" "\n" " - Beginner: If you have never installed Linux before, and wish to\n" "install the distribution elected \"Product of the year\" for 1999,\n" "click here.\n" "\n" " - Developer: If you are familiar with Linux and will be using the\n" "computer primarily for software development, you will find happiness\n" "here.\n" "\n" " - Server: If you wish to install a general purpose server, or the\n" "Linux distribution elected \"Distribution/Server\" for 1999, select\n" "this.\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you." msgstr "" "Velg:\n" "\n" " - Nybegynner: Hvis du ikke har installert Linux før, eller ønsker å\n" "installere distribusjonen valgt til \"Product of the year\" for 1999,\n" "klikk her.\n" "\n" " - Utvikler: hvis du kjent med Linux og primært vil bruke datamaskinen\n" "din til å utvikle programvare vil du finne lykken her.\n" "\n" " - Tjener: Hvis du ønsker å installere en tjener, eller Linux-\n" "distribusjonen valgt til \"Distribution/Server\" for 1999, velg denne.\n" "\n" " - Ekspert: Hvis du allerede kjenner GNU/Linux og ønsker å gjøre en\n" "egendefinert installasjon, så er dette installasjonsvalget for deg." #: ../help.pm_.c:312 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n" "which driver to use for this card, or if you have no SCSI adapters\n" "at all, you will then be prompted on whether you have one or not.\n" "If you have none, answer \"No\". If you have one or more, answer\n" "\"Yes\". A list of drivers will then pop up, from which you will\n" "have to select one.\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from you documentation or from Windows (if you have\n" "it on your system), as suggested by the installation guide.\n" "These are the options you will need to provide to the driver." msgstr "" "DrakX vil først forsøke å se etter et eller flere PCI\n" "SCSI-adapter(ere). Hvis den finner det (eller dem) og vet hvilken\n" "driver(ere) som skal brukes, vil denne (disse) bli lagt inn automatisk.\n" "\n" "Hvis SCSI-adapteret ditt er ISA, eller PCI, men DrakX ikke vet\n" "hvilken driver som skal brukes for dette kortet, eller hvis du ikke\n" "har noen SCSI-adapterere i det hele tatt, vil du bli spurt om du\n" "har noen eller ikke. Hvis du ikke har noen, svar \"Nei\". Hvis du\n" "har et eller fler, svar \"Ja\". En liste over drivere vil så komme\n" "opp, som du må velge en driver fra.\n" "\n" "Etter at du har valgt driveren vil DrakX spørre deg om du ønsker\n" "å spesifisere opsjonene for denne. Først, prøv å la driveren søke\n" "etter maskinvare: Dette fungerer vanligvis fint.\n" "\n" "Hvis ikke, glem ikke informasjonen om maskinvaren din som du kan få\n" "fra dokumentasjonen din eller fra Windows (hvis du har denne på systemet\n" "ditt), som foreslått i installasjonsguiden. Dette er opsjonene du vil\n" "trenge å gi til driveren." #: ../help.pm_.c:333 msgid "" "In this stage, you may choose what partition(s) use to install your\n" "Linux-Mandrake system." msgstr "" "På dette punktet kan du velge hvilken partisjon(er) som skal brukes til\n" "å installere Linux-Mandrake systemet ditt." #: ../help.pm_.c:363 msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the five\n" "buttons \"Install\", \"Select more/less\" and \"Show more/less\"." msgstr "" "Du kan nå velge de pakkene du ønsker å installere.\n" "\n" "\n" "Vennligst merk at noen pakker er avhengige av installasjon av andre pakker.\n" "Disse blir referert til som pakkeavhengigheter. Pakkene du velger, og\n" "pakkene disse trenger vil automatisk bli valgt for installering.\n" "Det er ikke mulig å installere en pakke uten å installere alle dens\n" "avhengigheter.\n" "\n" "\n" "Informasjon om hver kategori og spesifikke pakker er tilgjengelig i området\n" "kalt \"Info\", som du finner mellom listen over pakker og de fem knappene\n" "\"Installer\", \"Velg flere/færre\" og \"Vis flere/færre\"." #: ../help.pm_.c:378 msgid "" "The packages selected are now being installed.\n" "\n" "\n" "This operation should take a few minutes." msgstr "" "Pakkene som er valgt blir nå installert.\n" "\n" "\n" "Denne operasjonen burde ta noen minutter." #: ../help.pm_.c:398 msgid "" "This section is dedicated to configuring a local area network,\n" "or LAN. If you answer \"Yes\" here, DrakX will try to find an\n" "Ethernet adapter on your machine. PCI adapters should be found and\n" "initialized automatically. However, if your peripheral is ISA,\n" "autodetection will not work, and you will have to choose a driver\n" "from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses " msgstr "" "Denne seksjonen er dedikert til konfigurering av et lokalt nettverk,\n" "eller LAN. Hvis du svarer \"Ja\" her, vil DrakX forsøke å finne\n" "et Ethernet-adapter i maskinen din. PCI-adaptere burde bli funnet og\n" "initialisert automatisk. Men, hvis det er et ISA, vil ikke automatisk\n" "oppdaging virke, og du må velge en driver fra listen som så vil vises.\n" "\n" "\n" "For SCSI-adaptere kan du la driveren søke etter adapteret første\n" "gangen, ellers må du spesifisere opsjonene for driveren som du\n" "har innhentet fra Windows sitt kontrollpanel.\n" "\n" "\n" "Hvis du installerer et Linux-Mandrake system på en maskin som er en del\n" "av et allerede eksisterende nettverk, vil nettverks-administratoren\n" "ha gitt deg all nødvendig informasjon (IP-adresse, nettverks-\n" "submask eller netmask, og vertsnavn). Hvis du f.eks. setter\n" "opp et privat nettverk hjemme, burde du velge adresser." #: ../help.pm_.c:426 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd queue\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer.The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" "Linux kan håndtere mange typer av skrivere. Hver av disse\n" "trenger forskjellige oppsett.\n" "\n" "\n" "Hvis skriveren din er direkte koblet til maskinen din, velg\n" "\"Lokal skriver\". Du må så fortelle hvilken port skriveren\n" "din er koblet til, og velge passende filter.\n" "\n" "\n" "Hvis du ønsker tilgang til en skriver lokalisert på en fjern Unix-maskin,\n" "må du velge \"Fjern-lpd-kø\". For at dette skal virke trengs ikke\n" "brukernavn eller passord, men du må vite navnet på skriverkøen på\n" "denne tjeneren.\n" "\n" "\n" "Hvis du ønsker tilgang en SMB-skriver (som betyr en skriver lokalisert\n" "på en fjern Windows 9x/NT maskin), må du spesifisere dens SMB-navn\n" "(som ikke er dens TCP/IP-navn), og muligens dens IP-adresse, pluss\n" "brukernavn, arbeidsgruppe og passord som behøves for å få tilgang til\n" "skriveren, og selvfølgelig navnet på skriveren. Det samme gjelder for\n" "en NetWare-skriver, med unntak av at du ikke trenger noen arbeidsgruppe-\n" "informasjon." #: ../help.pm_.c:449 msgid "" "You must now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" "Du må nå entre root-passordet for Linux-Mandrake systemet ditt.\n" "Passordet må entres to ganger for å verifisere at begge passord-\n" "inntastingene er identiske.\n" "\n" "\n" "Root er administratoren av systemet, og er den eneste brukeren som\n" "har adgang til å modifisere systemkonfigurasjonen. Velg derfor dette\n" "passordet med forsiktighet! Ikke-autorisert bruk av root-kontoen kan\n" "være ekstremt farlig for integriteten til systemet, dataene det inneholder,\n" "og andre systemer tilkoblet dette. Passordet bør være en miks av\n" "alfanumeriske tegn og være minst åtte tegn langt. Passordet bør *aldri*\n" "bli skrevet ned. Ikke lag passordet for langt eller for komplisert:\n" "du må kunne klare å huske det." #: ../install2.pm_.c:42 msgid "Choose your language" msgstr "Velg språk" #: ../install2.pm_.c:43 msgid "Select installation class" msgstr "Velg installasjonsklasse" #: ../install2.pm_.c:44 msgid "Setup SCSI" msgstr "Oppsett SCSI" #: ../install2.pm_.c:45 msgid "Choose install or upgrade" msgstr "Velg installer eller oppgrader" #: ../install2.pm_.c:46 msgid "Configure mouse" msgstr "Konfigurer mus" #: ../install2.pm_.c:47 msgid "Choose your keyboard" msgstr "Velg tastatur" #: ../install2.pm_.c:48 msgid "Miscellaneous" msgstr "Forskjellig" #: ../install2.pm_.c:49 msgid "Setup filesystems" msgstr "Oppsett filsystemer" #: ../install2.pm_.c:50 msgid "Format partitions" msgstr "Formater partisjoner" #: ../install2.pm_.c:51 msgid "Choose packages to install" msgstr "Velg pakker for installering" #: ../install2.pm_.c:52 msgid "Install system" msgstr "Installer systemet" #: ../install2.pm_.c:53 msgid "Configure networking" msgstr "Konfigurer nettverk" #: ../install2.pm_.c:54 msgid "Cryptographic" msgstr "Kryptografisk" #: ../install2.pm_.c:55 msgid "Configure timezone" msgstr "Konfigurer tidssone" #: ../install2.pm_.c:57 msgid "Configure printer" msgstr "Konfigurer skriver" #: ../install2.pm_.c:58 ../install_steps_interactive.pm_.c:476 #: ../install_steps_interactive.pm_.c:477 msgid "Set root password" msgstr "Sett root-passord" #: ../install2.pm_.c:59 msgid "Add a user" msgstr "Legg til en bruker" #: ../install2.pm_.c:60 msgid "Create a bootdisk" msgstr "Opprett en oppstartdiskett" #: ../install2.pm_.c:61 msgid "Install bootloader" msgstr "Installer oppstartslaster" #: ../install2.pm_.c:62 msgid "Configure X" msgstr "Konfigurer X" #: ../install2.pm_.c:63 msgid "Exit install" msgstr "Avslutt installering" #: ../install2.pm_.c:83 msgid "beginner" msgstr "nybegynner" #: ../install2.pm_.c:83 msgid "developer" msgstr "utvikler" #: ../install2.pm_.c:83 msgid "expert" msgstr "ekspert" #: ../install2.pm_.c:83 msgid "server" msgstr "tjener" #: ../install2.pm_.c:308 msgid "Partitioning failed: no root filesystem" msgstr "Partisjonering feilet: intet root-filsystem" #: ../install2.pm_.c:322 msgid "Not enough swap to fulfill installation, please add some" msgstr "" "Ikke nok vekslingsplass til å fullføre installasjonen, vennligst legg til mer" #: ../install_any.pm_.c:185 ../standalone/diskdrake_.c:61 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" "Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n" "Jeg vil førsøke å blanke ut dårlige partisjoner" #: ../install_any.pm_.c:201 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake klarte ikke å lese partisjonstabellen korrekt.\n" "Fortsett på eget ansvar!" #: ../install_any.pm_.c:211 msgid "Searching root partition." msgstr "Søker root-partisjon." #: ../install_any.pm_.c:242 msgid "Information" msgstr "Informasjon" #: ../install_any.pm_.c:243 #, c-format msgid "%s: This is not a root partition, please select another one." msgstr "%s: Dette er ikke en root-partisjon, vennligst velg en annen." #: ../install_any.pm_.c:245 msgid "No root partition found" msgstr "Ingen root-partisjon funnet" #: ../install_any.pm_.c:281 msgid "Can't use broadcast with no NIS domain" msgstr "Kan ikke bruke broadcast uten NIS domene" #: ../install_any.pm_.c:456 msgid "Error reading file $f" msgstr "Feil ved lesing av fil $f" #: ../install_any.pm_.c:462 #, c-format msgid "Bad kickstart file %s (failed %s)" msgstr "Dårlig kickstart-fil %s (mislykket %s)" #: ../install_steps.pm_.c:68 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "En feil oppsto, men jeg vet ikke hvordan jeg skal håndtere dette på en\n" "pen måte.\n" "Fortsett på eget ansvar." #: ../install_steps.pm_.c:132 #, c-format msgid "Duplicate mount point %s" msgstr "Dupliser monteringspunkt %s" #: ../install_steps.pm_.c:502 msgid "No floppy drive available" msgstr "Ingen diskettstasjon tilgjengelig" #: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26 #, c-format msgid "Entering step `%s'\n" msgstr "Entrer trinn `%s'\n" #: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:292 msgid "You must have a swap partition" msgstr "Du må ha en vekslingspartisjon" #: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:294 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" "Du har ingen vekslingspartisjon\n" "\n" "Fortsette likevel?" #: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:327 msgid "Choose the size you want to install" msgstr "Velg størrelsen du ønsker å installere" #: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:376 msgid "Total size: " msgstr "Total størrelse: " #: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:388 #, c-format msgid "Version: %s\n" msgstr "Versjon: %s\n" #: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:389 #, c-format msgid "Size: %d KB\n" msgstr "Størrelse: %d KB\n" #: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:504 msgid "Choose the packages you want to install" msgstr "Velg pakkene du ønsker å installere" #: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:507 msgid "Info" msgstr "Info" #: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:515 #: ../install_steps_interactive.pm_.c:80 msgid "Install" msgstr "Installer" #: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:534 #: ../install_steps_interactive.pm_.c:249 msgid "Installing" msgstr "Installerer" #: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:541 msgid "Please wait, " msgstr "Vennligst vent, " #: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:543 msgid "Time remaining " msgstr "Tid som gjenstår " #: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:544 msgid "Total time " msgstr "Total tid " #: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:549 #: ../install_steps_interactive.pm_.c:249 msgid "Preparing installation" msgstr "Forbereder installasjon" #: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:564 #, c-format msgid "Installing package %s" msgstr "Installerer pakke %s" #: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:589 msgid "Go on anyway?" msgstr "Fortsette uansett?" #: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:589 msgid "There was an error ordering packages:" msgstr "Det var en feil ved endring av pakkenes rekkefølge:" #: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:780 msgid "Use existing configuration for X11?" msgstr "Bruke eksisterende konfigurasjon for X11?" #: ../install_steps_gtk.pm_.c:258 msgid "" "WARNING!\n" "\n" "DrakX now needs to resize your Windows partition. Be careful: this operation " "is\n" "dangerous. If you have not already done so, you should first run scandisk " "(and\n" "optionally run defrag) on this partition and backup your data.\n" "When sure, press Ok." msgstr "" #: ../install_steps_gtk.pm_.c:276 msgid "Automatic resizing failed" msgstr "Automatisk endring av størrelse mislykket" #: ../install_steps_gtk.pm_.c:324 #, c-format msgid "Going to install %d MB. You can choose to install more programs" msgstr "%d MB vil bli installert. Du kan velge å installere flere programmer" #: ../install_steps_gtk.pm_.c:325 msgid "You will be able to choose more precisely in next step" msgstr "Du vil kunne velge mere presist i neste trinn" #: ../install_steps_gtk.pm_.c:537 msgid "Estimating" msgstr "Beregner" #: ../install_steps_gtk.pm_.c:559 #, c-format msgid "%d packages" msgstr "%d pakker" #: ../install_steps_gtk.pm_.c:559 msgid ", %U MB" msgstr ", %U MB" #: ../install_steps_interactive.pm_.c:36 msgid "An error occurred" msgstr "En feil oppsto" #: ../install_steps_interactive.pm_.c:53 msgid "Which language do you want?" msgstr "Hvilket språk ønsker du?" #: ../install_steps_interactive.pm_.c:67 ../standalone/keyboarddrake_.c:22 msgid "Keyboard" msgstr "Tastatur" #: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:23 msgid "What is your keyboard layout?" msgstr "Hva er tastatur-oppsettet ditt?" #: ../install_steps_interactive.pm_.c:78 msgid "Install/Upgrade" msgstr "Installer/Oppgrader" #: ../install_steps_interactive.pm_.c:79 msgid "Is this an install or an upgrade?" msgstr "Er dette en installasjon eller en oppgradering?" #: ../install_steps_interactive.pm_.c:80 msgid "Upgrade" msgstr "Oppgrader" #: ../install_steps_interactive.pm_.c:88 msgid "Root Partition" msgstr "Root-partisjon" #: ../install_steps_interactive.pm_.c:89 msgid "What is the root partition (/) of your system?" msgstr "Hva er root-partisjonen (/) på systemet ditt?" #: ../install_steps_interactive.pm_.c:99 msgid "Recommended" msgstr "Anbefalt" #: ../install_steps_interactive.pm_.c:100 msgid "Customized" msgstr "Egendefinert" #: ../install_steps_interactive.pm_.c:101 msgid "Expert" msgstr "Ekspert" #: ../install_steps_interactive.pm_.c:103 #: ../install_steps_interactive.pm_.c:117 msgid "Install Class" msgstr "Installeringsklasse" #: ../install_steps_interactive.pm_.c:104 msgid "What installation class do you want?" msgstr "Hvilken installasjonsklasse ønsker du?" #: ../install_steps_interactive.pm_.c:113 msgid "Normal" msgstr "Normal" #: ../install_steps_interactive.pm_.c:114 msgid "Developement" msgstr "Utvikling" #: ../install_steps_interactive.pm_.c:115 msgid "Server" msgstr "Tjener" #: ../install_steps_interactive.pm_.c:118 msgid "What usage do you want?" msgstr "Hva slags bruk ønsker du?" #: ../install_steps_interactive.pm_.c:131 ../standalone/mousedrake_.c:25 msgid "What is the type of your mouse?" msgstr "Hva slags type er musen din?" #: ../install_steps_interactive.pm_.c:134 ../standalone/mousedrake_.c:35 msgid "Emulate third button?" msgstr "Emulere tredje knapp?" #: ../install_steps_interactive.pm_.c:137 ../standalone/mousedrake_.c:38 msgid "Mouse Port" msgstr "Museport" #: ../install_steps_interactive.pm_.c:138 ../standalone/mousedrake_.c:39 msgid "Which serial port is your mouse connected to?" msgstr "Hvilken serieport er musen din koblet til?" #: ../install_steps_interactive.pm_.c:153 msgid "no available partitions" msgstr "ingen tilgjengelige partisjoner" #: ../install_steps_interactive.pm_.c:155 #, c-format msgid "(%dMb)" msgstr "(%dMb)" #: ../install_steps_interactive.pm_.c:162 msgid "Which partition do you want to use as your root partition" msgstr "Hvilken partisjon vil du bruke som din root-partisjon" #: ../install_steps_interactive.pm_.c:169 msgid "Choose the mount points" msgstr "Velg monteringspunkter" #: ../install_steps_interactive.pm_.c:181 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Du må starte maskinen på nytt for at modifiseringene av partisjonstabellen\n" "skal tre i kraft" #: ../install_steps_interactive.pm_.c:200 msgid "Choose the partitions you want to format" msgstr "Velg de partisjonene du ønsker å formatere" #: ../install_steps_interactive.pm_.c:219 msgid "Looking for available packages" msgstr "Ser etter tilgjengelige pakker" #: ../install_steps_interactive.pm_.c:225 msgid "Finding packages to upgrade" msgstr "Finner pakker å oppgradere" #: ../install_steps_interactive.pm_.c:234 msgid "Package Group Selection" msgstr "Valg pakkegruppe" #: ../install_steps_interactive.pm_.c:258 msgid "" "Installing package %s\n" "%d%%" msgstr "" "Installerer pakke %s\n" "%d%%" #: ../install_steps_interactive.pm_.c:267 msgid "Post install stuff" msgstr "Postinstallerings-saker" #: ../install_steps_interactive.pm_.c:278 msgid "Keep the current IP configuration" msgstr "Behold nåværende IP-konfigurasjon" #: ../install_steps_interactive.pm_.c:279 msgid "Reconfigure network now" msgstr "Rekonfigurer nettverket nå" #: ../install_steps_interactive.pm_.c:280 #: ../install_steps_interactive.pm_.c:292 msgid "Do not set up networking" msgstr "Ikke sett opp nettverk" #: ../install_steps_interactive.pm_.c:282 #: ../install_steps_interactive.pm_.c:290 msgid "Network Configuration" msgstr "Nettverks-konfigurasjon" #: ../install_steps_interactive.pm_.c:283 msgid "Local networking has already been configured. Do you want to:" msgstr "Lokalt nettverk har allerede blitt konfigurert. Vil du:" #: ../install_steps_interactive.pm_.c:291 msgid "Do you want to configure networking for your system?" msgstr "Vil du konfigurere nettverk for systemet ditt?" #: ../install_steps_interactive.pm_.c:292 msgid "Dialup with modem" msgstr "Oppringt med modem" #: ../install_steps_interactive.pm_.c:292 msgid "Local LAN" msgstr "Lokalt LAN" #: ../install_steps_interactive.pm_.c:301 msgid "no network card found" msgstr "ingen nettverkskort funnet" #: ../install_steps_interactive.pm_.c:330 #, c-format msgid "Configuring network device %s" msgstr "Konfigurerer nettverksenhet %s" #: ../install_steps_interactive.pm_.c:331 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Vennligst entre IP-konfigurasjonen for denne maskinen.\n" "Hvert element bør entres som en IP-adresse i punkt-desimal\n" "notasjon (f.eks, 1.2.3.4)." #: ../install_steps_interactive.pm_.c:334 msgid "Automatic IP" msgstr "Automatisk IP" #: ../install_steps_interactive.pm_.c:334 msgid "IP address:" msgstr "IP-adresse:" #: ../install_steps_interactive.pm_.c:334 msgid "Netmask:" msgstr "Nettmaske:" #: ../install_steps_interactive.pm_.c:335 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../install_steps_interactive.pm_.c:341 ../printerdrake.pm_.c:149 msgid "IP address should be in format 1.2.3.4" msgstr "IP-adresse bør være i format 1.2.3.4" #: ../install_steps_interactive.pm_.c:360 msgid "Configuring network" msgstr "Konfigurerer nettverk" #: ../install_steps_interactive.pm_.c:361 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Vennligst entre vertsnavnet ditt.\n" "Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n" "så som ``minboks.mittlab.mittfirma.no''.\n" "Du kan også entre IP-adressen til gateway'en hvis du har en" #: ../install_steps_interactive.pm_.c:365 msgid "DNS server:" msgstr "DNS-tjener:" #: ../install_steps_interactive.pm_.c:365 msgid "Gateway device:" msgstr "Gateway-enhet:" #: ../install_steps_interactive.pm_.c:365 msgid "Gateway:" msgstr "Gateway:" #: ../install_steps_interactive.pm_.c:365 msgid "Host name:" msgstr "Vertsnavn:" #: ../install_steps_interactive.pm_.c:378 msgid "Try to find a modem?" msgstr "Prøve å finne et modem?" #: ../install_steps_interactive.pm_.c:387 msgid "Which serial port is your modem connected to?" msgstr "Hvilken serieport er modemet ditt koblet til?" #: ../install_steps_interactive.pm_.c:391 msgid "Dialup options" msgstr "Opsjoner oppringt" #: ../install_steps_interactive.pm_.c:392 msgid "Connection name" msgstr "Navn tilknytning" #: ../install_steps_interactive.pm_.c:393 msgid "Phone number" msgstr "Telefonnummer" #: ../install_steps_interactive.pm_.c:394 msgid "Login ID" msgstr "Login ID" #: ../install_steps_interactive.pm_.c:395 #: ../install_steps_interactive.pm_.c:478 #: ../install_steps_interactive.pm_.c:524 #: ../install_steps_interactive.pm_.c:615 ../standalone/adduserdrake_.c:32 msgid "Password" msgstr "Passord" #: ../install_steps_interactive.pm_.c:396 msgid "Authentication" msgstr "Autentifikasjon" #: ../install_steps_interactive.pm_.c:396 msgid "CHAP" msgstr "CHAP" #: ../install_steps_interactive.pm_.c:396 msgid "PAP" msgstr "PAP" #: ../install_steps_interactive.pm_.c:396 msgid "Script-based" msgstr "Scriptbasert" #: ../install_steps_interactive.pm_.c:396 msgid "Terminal-based" msgstr "Terminalbasert" #: ../install_steps_interactive.pm_.c:397 msgid "Domain name" msgstr "Domenenavn" #: ../install_steps_interactive.pm_.c:398 msgid "First DNS Server" msgstr "Første DNS-tjener" #: ../install_steps_interactive.pm_.c:399 msgid "Second DNS Server" msgstr "Andre DNS-tjener" #: ../install_steps_interactive.pm_.c:412 msgid "Bringing up the network" msgstr "Henter opp nettverket" #: ../install_steps_interactive.pm_.c:427 msgid "Choose a mirror from which to get the packages" msgstr "Velg et speil som pakkene kan hentes fra" #: ../install_steps_interactive.pm_.c:432 msgid "Contacting the mirror to get the list of available packages" msgstr "Kontakter speilet for å få en liste over tilgjengelige pakker" #: ../install_steps_interactive.pm_.c:436 msgid "Which packages do you want to install" msgstr "Hvilke pakker ønsker du å installere" #: ../install_steps_interactive.pm_.c:438 msgid "Downloading cryptographic packages" msgstr "Laster ned kryptografiske pakker" #: ../install_steps_interactive.pm_.c:448 msgid "Which is your timezone?" msgstr "Hvilken er tidsonen din?" #: ../install_steps_interactive.pm_.c:449 msgid "Is your hardware clock set to GMT?" msgstr "Er maskinvareklokken din satt til GMT?" #: ../install_steps_interactive.pm_.c:459 msgid "Printer" msgstr "Skriver" #: ../install_steps_interactive.pm_.c:460 msgid "Would you like to configure a printer?" msgstr "Ønsker du å konfigurere en skriver?" #: ../install_steps_interactive.pm_.c:476 msgid "No password" msgstr "Intet passord" #: ../install_steps_interactive.pm_.c:476 #: ../install_steps_interactive.pm_.c:686 ../interactive.pm_.c:72 #: ../interactive.pm_.c:82 ../interactive.pm_.c:161 #: ../interactive_newt.pm_.c:48 ../interactive_newt.pm_.c:92 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:423 #: ../my_gtk.pm_.c:523 msgid "Ok" msgstr "Ok" #: ../install_steps_interactive.pm_.c:479 #: ../install_steps_interactive.pm_.c:525 ../standalone/adduserdrake_.c:33 msgid "Password (again)" msgstr "Passord (igjen)" #: ../install_steps_interactive.pm_.c:481 msgid "Use shadow file" msgstr "Bruk skyggefil" #: ../install_steps_interactive.pm_.c:481 msgid "shadow" msgstr "skygge" #: ../install_steps_interactive.pm_.c:482 msgid "MD5" msgstr "MD5" #: ../install_steps_interactive.pm_.c:482 msgid "Use MD5 passwords" msgstr "Bruk MD5 passord" #: ../install_steps_interactive.pm_.c:484 msgid "Use NIS" msgstr "Bruk NIS" #: ../install_steps_interactive.pm_.c:484 msgid "yellow pages" msgstr "gule sider" #: ../install_steps_interactive.pm_.c:488 #: ../install_steps_interactive.pm_.c:536 ../standalone/adduserdrake_.c:44 msgid "Please try again" msgstr "Vennligst prøv igjen" #: ../install_steps_interactive.pm_.c:488 #: ../install_steps_interactive.pm_.c:536 ../standalone/adduserdrake_.c:44 msgid "The passwords do not match" msgstr "Passordene stemmer ikke overens" #: ../install_steps_interactive.pm_.c:490 #: ../install_steps_interactive.pm_.c:537 ../standalone/adduserdrake_.c:45 msgid "This password is too simple" msgstr "Dette passordet er for enkelt" #: ../install_steps_interactive.pm_.c:497 msgid "Authentification NIS" msgstr "Autentifikasjon NIS" #: ../install_steps_interactive.pm_.c:498 msgid "NIS Domain" msgstr "NIS-domene" #: ../install_steps_interactive.pm_.c:498 msgid "NIS Server" msgstr "NIS-tjener" #: ../install_steps_interactive.pm_.c:518 ../standalone/adduserdrake_.c:26 msgid "Accept user" msgstr "Godta bruker" #: ../install_steps_interactive.pm_.c:518 ../standalone/adduserdrake_.c:26 msgid "Add user" msgstr "Legg til bruker" #: ../install_steps_interactive.pm_.c:519 ../standalone/adduserdrake_.c:27 #, c-format msgid "(already added %s)" msgstr "(allerede lagt til %s)" #: ../install_steps_interactive.pm_.c:519 ../standalone/adduserdrake_.c:27 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Entre en bruker\n" "%s" #: ../install_steps_interactive.pm_.c:521 ../standalone/adduserdrake_.c:29 msgid "Real name" msgstr "Virkelig navn" #: ../install_steps_interactive.pm_.c:522 ../standalone/adduserdrake_.c:30 msgid "User name" msgstr "Brukernavn" #: ../install_steps_interactive.pm_.c:527 ../standalone/adduserdrake_.c:35 msgid "Shell" msgstr "Skall" #: ../install_steps_interactive.pm_.c:538 ../standalone/adduserdrake_.c:46 msgid "Please give a user name" msgstr "Vennligst oppgi et brukernavn" #: ../install_steps_interactive.pm_.c:539 ../standalone/adduserdrake_.c:47 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Brukernavnet kan kun inneholde små bokstaver, tall, `-' og `_'" #: ../install_steps_interactive.pm_.c:540 ../standalone/adduserdrake_.c:48 msgid "This user name is already added" msgstr "Denne brukeren er allerede lagt til" #: ../install_steps_interactive.pm_.c:561 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO on your system, or another operating system removes LILO, or LILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" "En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n" "å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du " "ikke ønsker\n" "å installere LILO på systemet ditt, eller et annet operativsystem fjerner " "LILO, eller at LILO ikke virker med din\n" "maskinvarekonfigurasjon. En egendefinert oppstartsdiskett kan også brukes " "sammen\n" "med Mandrake's redningsbilde, som gjør det mye lettere gjenopprette etter " "systemsvikt.\n" "Ønsker du å opprette en oppstartsdiskett for systemet ditt?" #: ../install_steps_interactive.pm_.c:570 msgid "Sorry, no floppy drive available" msgstr "Beklager, ingen diskettstasjon tilgjengelig" #: ../install_steps_interactive.pm_.c:573 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Velg diskettstasjonen du ønsker å bruke for å lage oppstartsdisketten" #: ../install_steps_interactive.pm_.c:574 msgid "Skip" msgstr "Dropp" #: ../install_steps_interactive.pm_.c:578 #, c-format msgid "Insert a floppy in drive %s" msgstr "Sett inn en diskett i stasjon %s" #: ../install_steps_interactive.pm_.c:579 msgid "Creating bootdisk" msgstr "Oppretter oppstartdiskett" #: ../install_steps_interactive.pm_.c:586 msgid "Preparing bootloader" msgstr "Klargjør oppstartslaster" #: ../install_steps_interactive.pm_.c:598 msgid "First sector of boot partition" msgstr "Første sektor av oppstartspartisjon" #: ../install_steps_interactive.pm_.c:598 msgid "First sector of drive (MBR)" msgstr "Første sektor av disk (MBR)" #: ../install_steps_interactive.pm_.c:602 msgid "LILO Installation" msgstr "LILO-installasjon" #: ../install_steps_interactive.pm_.c:603 msgid "Where do you want to install the bootloader?" msgstr "Hvor vil du installere oppstartslasteren?" #: ../install_steps_interactive.pm_.c:606 msgid "Do you want to use LILO?" msgstr "Ønsker du å bruke LILO?" #: ../install_steps_interactive.pm_.c:609 msgid "Boot device" msgstr "Oppstartsenhet" #: ../install_steps_interactive.pm_.c:610 msgid "Linear (needed for some SCSI drives)" msgstr "Lineær (behøves av noen SCSI-disker)" #: ../install_steps_interactive.pm_.c:610 msgid "linear" msgstr "lineær" #: ../install_steps_interactive.pm_.c:611 msgid "Compact" msgstr "Kompakt" #: ../install_steps_interactive.pm_.c:611 msgid "compact" msgstr "kompakt" #: ../install_steps_interactive.pm_.c:612 msgid "Delay before booting default image" msgstr "Forsinkelse før oppstart av standard bilde" #: ../install_steps_interactive.pm_.c:613 msgid "Video mode" msgstr "Skjerm-modus" #: ../install_steps_interactive.pm_.c:616 msgid "Restrict command line options" msgstr "Begrense kommandolinje-opsjoner" #: ../install_steps_interactive.pm_.c:616 msgid "restrict" msgstr "begrense" #: ../install_steps_interactive.pm_.c:622 msgid "LILO main options" msgstr "LILO hovedopsjoner" #: ../install_steps_interactive.pm_.c:625 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord" #: ../install_steps_interactive.pm_.c:634 msgid "" "Here are the following entries in LILO.\n" "You can add some more or change the existent ones." msgstr "" "Her er følgende oppføringer i LILO\n" "Du kan legge til noen flere eller endre de eksisterende." #: ../install_steps_interactive.pm_.c:636 msgid "Add" msgstr "Legg til" #: ../install_steps_interactive.pm_.c:645 msgid "Linux" msgstr "Linux" #: ../install_steps_interactive.pm_.c:645 msgid "Other OS (windows...)" msgstr "Andre OS (windows...)" #: ../install_steps_interactive.pm_.c:645 msgid "Which type of entry do you want to add" msgstr "Hvilken inngangstype vil du legge til" #: ../install_steps_interactive.pm_.c:665 msgid "Image" msgstr "Bilde" #: ../install_steps_interactive.pm_.c:666 #: ../install_steps_interactive.pm_.c:674 msgid "Root" msgstr "Root" #: ../install_steps_interactive.pm_.c:667 msgid "Append" msgstr "Tilføye" #: ../install_steps_interactive.pm_.c:668 msgid "Initrd" msgstr "Initrd" #: ../install_steps_interactive.pm_.c:669 msgid "Read-write" msgstr "Les-skriv" #: ../install_steps_interactive.pm_.c:675 msgid "Table" msgstr "Tabell" #: ../install_steps_interactive.pm_.c:676 msgid "Unsafe" msgstr "Usikker" #: ../install_steps_interactive.pm_.c:681 msgid "Label" msgstr "Etikett" #: ../install_steps_interactive.pm_.c:683 msgid "Default" msgstr "Standard" #: ../install_steps_interactive.pm_.c:686 msgid "Remove entry" msgstr "Fjern inngang" #: ../install_steps_interactive.pm_.c:689 msgid "Empty label not allowed" msgstr "Tom etikett er ikke tillatt" #: ../install_steps_interactive.pm_.c:690 msgid "This label is already in use" msgstr "Denne etiketten er allerede i bruk" #: ../install_steps_interactive.pm_.c:691 #, c-format msgid "A entry %s already exists" msgstr "En inngang %s eksisterer ellerede" #: ../install_steps_interactive.pm_.c:705 msgid "Installation of LILO failed. The following error occured:" msgstr "Installasjon av LILO mislykket. Følgende feil oppsto:" #: ../install_steps_interactive.pm_.c:718 msgid "Proxies configuration" msgstr "Proxy-konfigurasjon" #: ../install_steps_interactive.pm_.c:719 msgid "HTTP proxy" msgstr "HTTP-proxy" #: ../install_steps_interactive.pm_.c:720 msgid "FTP proxy" msgstr "FTP-proxy" #: ../install_steps_interactive.pm_.c:726 msgid "Proxy should be http://..." msgstr "Proxy burde være http://..." #: ../install_steps_interactive.pm_.c:727 msgid "Proxy should be ftp://..." msgstr "Proxy burde være ftp://..." #: ../install_steps_interactive.pm_.c:737 ../standalone/draksec_.c:20 msgid "Windows(TM)" msgstr "Windows(TM)" #: ../install_steps_interactive.pm_.c:738 ../standalone/draksec_.c:21 msgid "Poor" msgstr "Dårlig" #: ../install_steps_interactive.pm_.c:739 ../standalone/draksec_.c:22 msgid "Low" msgstr "Lav" #: ../install_steps_interactive.pm_.c:740 ../standalone/draksec_.c:23 msgid "Medium" msgstr "Medium" #: ../install_steps_interactive.pm_.c:741 ../standalone/draksec_.c:24 msgid "High" msgstr "Høy" #: ../install_steps_interactive.pm_.c:742 ../standalone/draksec_.c:25 msgid "Paranoid" msgstr "Paranoid" #: ../install_steps_interactive.pm_.c:755 msgid "Miscellaneous questions" msgstr "Forskjellige spørsmål" #: ../install_steps_interactive.pm_.c:756 msgid "(may cause data corruption)" msgstr "(kan forårsake korrupsjon av data)" #: ../install_steps_interactive.pm_.c:756 msgid "Use hard drive optimisations?" msgstr "Bruk harddisk-optimisering?" #: ../install_steps_interactive.pm_.c:757 ../standalone/draksec_.c:29 msgid "Choose security level" msgstr "Velg sikkerhetsnivå" #: ../install_steps_interactive.pm_.c:758 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Presiser RAM-størrelse hvis det trengs (funnet %d MB)" #: ../install_steps_interactive.pm_.c:759 msgid "Removable media automounting" msgstr "Fjernbart media automonterer" #: ../install_steps_interactive.pm_.c:761 msgid "Enable num lock at startup" msgstr "Slå på num lock ved oppstart" #: ../install_steps_interactive.pm_.c:764 msgid "Give the ram size in Mb" msgstr "Oppgi ram-størrelsen i Mb" #: ../install_steps_interactive.pm_.c:792 #: ../install_steps_interactive.pm_.c:905 msgid "Try to find PCI devices?" msgstr "Prøve å finne PCI-enheter?" #: ../install_steps_interactive.pm_.c:807 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Noen trinn er ikke fullført.\n" "\n" "Ønsker du virkelig å slutte nå?" #: ../install_steps_interactive.pm_.c:814 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" "Gratulerer, installasjonen er fullført.\n" "Fjern oppstartsmediet og trykk return for å starte på nytt.\n" "\n" "For informasjon om endringer som er tilgjengelige for denne utgaven av " "Linux-Mandrake,\n" "sjekk errataen tilgjengelig fra http://www.linux-mandrake.com/.\n" "\n" "Informasjon om konfigurering av systemet ditt finnes i post\n" "install-kapittelet i Official Linux Mandrake User's Guide." #: ../install_steps_interactive.pm_.c:823 msgid "Shutting down" msgstr "Stenger av" #: ../install_steps_interactive.pm_.c:837 #, c-format msgid "Installing driver for %s card %s" msgstr "Installerer driver for %s kort %s" #: ../install_steps_interactive.pm_.c:838 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: ../install_steps_interactive.pm_.c:848 #, c-format msgid "Which %s driver should I try?" msgstr "Hvilken %s driver burde jeg prøve?" #: ../install_steps_interactive.pm_.c:856 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "I noen tilfeller trenger %s driveren å ha ekstra informasjon for å virke\n" "ordentlig, selv om den normalt virker fint foruten. Ønsker du å spesifisere\n" "ekstra\n" "opsjoner for den eller tillate driveren å sondere maskinen din for " "informasjonen\n" "den trenger? Av og til vil sondering stoppe maskinen, men burde ikke " "forårsake\n" "noen skade." #: ../install_steps_interactive.pm_.c:861 msgid "Autoprobe" msgstr "Automatisk sondering" #: ../install_steps_interactive.pm_.c:861 msgid "Specify options" msgstr "Spesifiser opsjoner" #: ../install_steps_interactive.pm_.c:865 #, c-format msgid "You may now provide its options to module %s." msgstr "Du kan nå gi dens opsjoner til modul %s." #: ../install_steps_interactive.pm_.c:871 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Du kan nå oppgi dens opsjoner for modul %s.\n" "Opsjonene er i format ``name=value name2=value2 ...''.\n" "F.eks., ``io=0x300 irq=7''" #: ../install_steps_interactive.pm_.c:874 msgid "Module options:" msgstr "Modulopsjoner:" #: ../install_steps_interactive.pm_.c:884 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Lasting av modul %s feilet.\n" "Ønsker du å prøve igjen med andre parametere?" #: ../install_steps_interactive.pm_.c:897 msgid "Try to find PCMCIA cards?" msgstr "Prøve å finne PCMCIA-kort?" #: ../install_steps_interactive.pm_.c:898 msgid "Configuring PCMCIA cards..." msgstr "Konfigurerer PCMCIA-kort..." #: ../install_steps_interactive.pm_.c:898 msgid "PCMCIA" msgstr "PCMCIA" #: ../install_steps_interactive.pm_.c:909 #, c-format msgid "Found %s %s interfaces" msgstr "Fant %s %s grensesnitt" #: ../install_steps_interactive.pm_.c:910 msgid "Do you have another one?" msgstr "Har du enda ett?" #: ../install_steps_interactive.pm_.c:911 #, c-format msgid "Do you have any %s interface?" msgstr "Har du noen %s grensesnitt?" #: ../install_steps_interactive.pm_.c:913 ../interactive.pm_.c:77 #: ../my_gtk.pm_.c:422 ../printerdrake.pm_.c:176 msgid "No" msgstr "Nei" #: ../install_steps_interactive.pm_.c:913 ../interactive.pm_.c:77 #: ../my_gtk.pm_.c:422 msgid "Yes" msgstr "Ja" #: ../install_steps_interactive.pm_.c:914 msgid "See hardware info" msgstr "Se maskinvareinfo" #: ../install_steps_newt.pm_.c:19 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "Linux-Mandrake installasjon %s" #: ../install_steps_newt.pm_.c:30 msgid "" " / between elements | selects | next screen " msgstr "" " / mellom elementer | velger | neste skjerm " #: ../interactive.pm_.c:82 ../interactive.pm_.c:160 #: ../interactive_newt.pm_.c:48 ../interactive_newt.pm_.c:92 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:423 msgid "Cancel" msgstr "Avbryt" #: ../interactive.pm_.c:178 msgid "Please wait" msgstr "Vennligst vent" #: ../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "Tvetydig (%s), vær mere presis\n" #: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51 #: ../interactive_stdio.pm_.c:70 msgid "Bad choice, try again\n" msgstr "Dårlig valg, prøv igjen\n" #: ../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr " ? (standard %s) " #: ../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "Ditt valg? (standard %s) " #: ../interactive_stdio.pm_.c:71 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "Ditt valg? (standard %s entre `none' for ingen) " #: ../keyboard.pm_.c:30 msgid "Armenian" msgstr "Armensk" #: ../keyboard.pm_.c:31 msgid "Belgian" msgstr "Belgisk" #: ../keyboard.pm_.c:32 msgid "Bulgarian" msgstr "Bulgarisk" #: ../keyboard.pm_.c:33 msgid "Brazilian" msgstr "Brasiliansk" #: ../keyboard.pm_.c:34 msgid "Swiss (French layout)" msgstr "Sveisisk (fransk oppsett)" #: ../keyboard.pm_.c:35 msgid "Swiss (German layout)" msgstr "Sveisisk (tysk oppsett)" #: ../keyboard.pm_.c:36 msgid "Czech" msgstr "Tsjekkisk" #: ../keyboard.pm_.c:37 msgid "German" msgstr "Tysk" #: ../keyboard.pm_.c:38 msgid "Danish" msgstr "Dansk" #: ../keyboard.pm_.c:39 msgid "Dvorak" msgstr "Dvorak" #: ../keyboard.pm_.c:40 msgid "Estonian" msgstr "Estlandsk" #: ../keyboard.pm_.c:41 msgid "Spanish" msgstr "Spansk" #: ../keyboard.pm_.c:42 msgid "Finnish" msgstr "Finsk" #: ../keyboard.pm_.c:43 msgid "French" msgstr "Fransk" #: ../keyboard.pm_.c:44 msgid "Georgian (\"Russian\" layout)" msgstr "Georgisk (\"Russisk\" oppsett)" #: ../keyboard.pm_.c:45 msgid "Georgian (\"Latin\" layout)" msgstr "Georgisk (\"Latinsk\" oppsett)" #: ../keyboard.pm_.c:46 msgid "Greek" msgstr "Gresk" #: ../keyboard.pm_.c:47 msgid "Hungarian" msgstr "Ungarsk" #: ../keyboard.pm_.c:48 msgid "Israeli" msgstr "Israelsk" #: ../keyboard.pm_.c:49 msgid "Israeli (Phonetic)" msgstr "Israelsk (Phonetic)" #: ../keyboard.pm_.c:50 msgid "Icelandic" msgstr "Islansk" #: ../keyboard.pm_.c:51 msgid "Italian" msgstr "Italiensk" #: ../keyboard.pm_.c:52 msgid "Latin American" msgstr "Latinamerikansk" #: ../keyboard.pm_.c:53 msgid "Dutch" msgstr "Hollansk" #: ../keyboard.pm_.c:54 msgid "Lithuanian AZERTY" msgstr "Liauisk AZERTY" #: ../keyboard.pm_.c:55 msgid "Lithuanian \"number row\" QWERTY" msgstr "Litauisk \"nummer-rekke\" QWERTY" #: ../keyboard.pm_.c:56 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Litauisk \"phonétic\" QWERTY" #: ../keyboard.pm_.c:57 msgid "Norwegian" msgstr "Norsk" #: ../keyboard.pm_.c:58 msgid "Polish" msgstr "Polsk" #: ../keyboard.pm_.c:59 msgid "Portuguese" msgstr "Portugisisk" #: ../keyboard.pm_.c:60 msgid "Canadian (Quebec)" msgstr "Canadisk (Quebec)" #: ../keyboard.pm_.c:61 msgid "Russian" msgstr "Russisk" #: ../keyboard.pm_.c:62 msgid "Russian (Yawerty)" msgstr "Russisk (Yawerty)" #: ../keyboard.pm_.c:63 msgid "Swedish" msgstr "Svensk" #: ../keyboard.pm_.c:64 msgid "Slovenian" msgstr "Slovensk" #: ../keyboard.pm_.c:65 msgid "Slovakian" msgstr "Slovakisk" #: ../keyboard.pm_.c:66 msgid "Thai keyboard" msgstr "Thai-tastatur" #: ../keyboard.pm_.c:67 msgid "Turkish (traditional \"F\" model)" msgstr "Tyrkisk (tradisjonell \"F\" modell)" #: ../keyboard.pm_.c:68 msgid "Turkish (modern \"Q\" model)" msgstr "Tyrkisk (moderne \"Q\" modell)" #: ../keyboard.pm_.c:69 msgid "Ukrainian" msgstr "Ukrainsk" #: ../keyboard.pm_.c:70 msgid "UK keyboard" msgstr "UK-tastatur" #: ../keyboard.pm_.c:71 msgid "US keyboard" msgstr "US-tastatur" #: ../keyboard.pm_.c:72 msgid "US keyboard (international)" msgstr "US-tastatur (internasjonal)" #: ../keyboard.pm_.c:73 msgid "Yugoslavian (latin layout)" msgstr "Jugoslavisk (latinsk oppsett)" #: ../lilo.pm_.c:141 #, c-format msgid "" "Welcome to LILO the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or wait %d seconds for " "default boot.\n" "\n" msgstr "" "Velkommen til LILO, operativsystem-velgeren!\n" "\n" "For å se mulige valg, trykk \n" "\n" "For å laste en av disse, skriv inn navnet og trykk eller vent %d " "sekunder for standard oppstart.\n" "\n" #: ../mouse.pm_.c:20 msgid "No Mouse" msgstr "Ingen mus" #: ../mouse.pm_.c:21 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "Microsoft Rev 2.1A eller høyere (seriell)" #: ../mouse.pm_.c:22 msgid "Logitech CC Series (serial)" msgstr "Logitech CC-seriene (seriell)" #: ../mouse.pm_.c:23 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "Logitech MouseMan+/FirstMouse+ (seriell)" #: ../mouse.pm_.c:24 msgid "ASCII MieMouse (serial)" msgstr "ASCII MieMouse (seriell)" #: ../mouse.pm_.c:25 msgid "Genius NetMouse (serial)" msgstr "Genius NetMouse (seriell)" #: ../mouse.pm_.c:26 msgid "Microsoft IntelliMouse (serial)" msgstr "Microsoft IntelliMouse (seriell)" #: ../mouse.pm_.c:27 msgid "MM Series (serial)" msgstr "MM-seriene (seriell)" #: ../mouse.pm_.c:28 msgid "MM HitTablet (serial)" msgstr "MM HitTablet (seriell)" #: ../mouse.pm_.c:29 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (seriell, gammel C7 type)" #: ../mouse.pm_.c:30 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "Logitech MouseMan/FirstMouse (seriell)" #: ../mouse.pm_.c:31 msgid "Generic Mouse (serial)" msgstr "Generic Mouse (seriell)" #: ../mouse.pm_.c:32 msgid "Microsoft compatible (serial)" msgstr "Microsoft-kompatibel (seriell)" #: ../mouse.pm_.c:33 msgid "Generic 3 Button Mouse (serial)" msgstr "Generic 3-knappers mus (seriell)" #: ../mouse.pm_.c:34 msgid "Mouse Systems (serial)" msgstr "Mouse Systems (seriell)" #: ../mouse.pm_.c:35 msgid "Generic Mouse (PS/2)" msgstr "Generic mus (PS/2)" #: ../mouse.pm_.c:36 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "Logitech MouseMan/FirstMouse (ps/2)" #: ../mouse.pm_.c:37 msgid "Generic 3 Button Mouse (PS/2)" msgstr "Generic 3-knappers mus (PS/2)" #: ../mouse.pm_.c:38 msgid "ALPS GlidePoint (PS/2)" msgstr "ALPS GlidePoint (PS/2)" #: ../mouse.pm_.c:39 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)" #: ../mouse.pm_.c:40 msgid "Kensington Thinking Mouse (PS/2)" msgstr "Kensington Thinking Mouse (PS/2)" #: ../mouse.pm_.c:41 msgid "ASCII MieMouse (PS/2)" msgstr "ASCII MieMouse (PS/2)" #: ../mouse.pm_.c:42 msgid "Genius NetMouse (PS/2)" msgstr "Genius NetMouse (PS/2)" #: ../mouse.pm_.c:43 msgid "Genius NetMouse Pro (PS/2)" msgstr "Genius NetMouse Pro (PS/2)" #: ../mouse.pm_.c:44 msgid "Genius NetScroll (PS/2)" msgstr "Genius NetScroll (PS/2)" #: ../mouse.pm_.c:45 msgid "Microsoft IntelliMouse (PS/2)" msgstr "Microsoft IntelliMouse (PS/2)" #: ../mouse.pm_.c:46 msgid "ATI Bus Mouse" msgstr "ATI Bus Mouse" #: ../mouse.pm_.c:47 msgid "Microsoft Bus Mouse" msgstr "Microsoft Bus Mouse" #: ../mouse.pm_.c:48 msgid "Logitech Bus Mouse" msgstr "Logitech Bus Mouse" #: ../mouse.pm_.c:49 msgid "USB Mouse" msgstr "USB mus" #: ../mouse.pm_.c:50 msgid "USB Mouse (3 buttons or more)" msgstr "USB mus (3 knapper eller mer)" #: ../partition_table.pm_.c:480 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" "Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n" "Den eneste løsningen er å flytte primærpartisjonene dine for å ha hullet ved " "siden av de utvidede partisjonene" #: ../partition_table.pm_.c:566 #, c-format msgid "Error reading file %s" msgstr "Feil ved lesing av fil %s" #: ../partition_table.pm_.c:573 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Gjenoppretting fra fil %s mislykket: %s" #: ../partition_table.pm_.c:575 msgid "Bad backup file" msgstr "Dårlig sikkerhetskopi-fil" #: ../partition_table.pm_.c:596 #, c-format msgid "Error writing to file %s" msgstr "Feil ved skriving til fil %s" #: ../printer.pm_.c:244 msgid "Local printer" msgstr "Lokal skriver" #: ../printer.pm_.c:245 msgid "Remote lpd" msgstr "Fjern-lpd" #: ../printer.pm_.c:246 msgid "SMB/Windows 95/98/NT" msgstr "SMB/Windows 95/98/NT" #: ../printer.pm_.c:247 msgid "NetWare" msgstr "NetWare" #: ../printerdrake.pm_.c:75 msgid "Local Printer Options" msgstr "Opsjoner for lokal skriver" #: ../printerdrake.pm_.c:76 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue?" msgstr "" "Hver skriverkø (som skrivejobber sendes til) trenger et navn\n" "(ofte lp) og en spolingskatalog assosiert til denne. Hvilket\n" "navn og katalog skal brukes for denne køen?" #: ../printerdrake.pm_.c:79 msgid "Name of queue:" msgstr "Køens navn:" #: ../printerdrake.pm_.c:79 msgid "Spool directory:" msgstr "Spolingskatalog:" #: ../printerdrake.pm_.c:90 msgid "Select Printer Connection" msgstr "Velg skrivertilkobling" #: ../printerdrake.pm_.c:91 msgid "How is the printer connected?" msgstr "Hvordan er skriveren tilkoblet?" #: ../printerdrake.pm_.c:99 msgid "Detecting devices..." msgstr "Finner enheter..." #: ../printerdrake.pm_.c:99 msgid "Test ports" msgstr "Test porter" #: ../printerdrake.pm_.c:112 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "En skriver, modell \"%s\", ble funnet på " #: ../printerdrake.pm_.c:119 msgid "Local Printer Device" msgstr "Lokal skriverenhet" #: ../printerdrake.pm_.c:120 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" "Hvilken enhet er skriveren din koblet til \n" "(merk at /dev/lp0 er det samme som LPT1:)?\n" #: ../printerdrake.pm_.c:121 msgid "Printer Device:" msgstr "Skriverenhet:" #: ../printerdrake.pm_.c:125 msgid "Remote lpd Printer Options" msgstr "Opsjoner for fjern-lpd skriver" #: ../printerdrake.pm_.c:126 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" "For å bruke en fjern-lpd skriverkø, må du oppgi vertsnavnet\n" "til skrivertjeneren og kønavnet til den tjeneren som\n" "jobbene skal plasseres i." #: ../printerdrake.pm_.c:129 msgid "Remote hostname:" msgstr "Fjern-vertnavn:" #: ../printerdrake.pm_.c:129 msgid "Remote queue" msgstr "Fjern-kø" #: ../printerdrake.pm_.c:134 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opsjoner for SMB (Windows 9x/NT) skriver" #: ../printerdrake.pm_.c:135 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" "For å skrive til en SMB-skriver, må du oppgi SMB-vertsnavnet\n" "(Merk! Dette kan være forskjellig fra dens TCP/IP-vertsnavn!)\n" "og muligens IP-adressen til skrivertjeneren, så vel som det delte\n" "navnet til skriveren du ønsker tilgang til og anvendelige brukernavn,\n" "passord og arbeidsgruppeinformasjon." #: ../printerdrake.pm_.c:140 msgid "SMB server IP:" msgstr "SMB-tjener IP:" #: ../printerdrake.pm_.c:140 msgid "SMB server host:" msgstr "SMB-tjener vert:" #: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 msgid "Password:" msgstr "Passord:" #: ../printerdrake.pm_.c:141 msgid "Share name:" msgstr "Navn deling:" #: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 msgid "User name:" msgstr "Brukernavn:" #: ../printerdrake.pm_.c:142 msgid "Workgroup:" msgstr "Arbeidsgruppe:" #: ../printerdrake.pm_.c:157 msgid "NetWare Printer Options" msgstr "NetWare skriveropsjoner" #: ../printerdrake.pm_.c:158 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" "For å skrive til en NetWare-skriver, må du oppgi navnet til NetWare-\n" "skrivertjeneren (Mer! Dette kan være forskjellig fra dens TCP/IP-\n" "vertsnavn!) så vel som navnet på skriverkøen til skriveren du ønsker\n" "adgang til og anvendelige brukernavn og passord." #: ../printerdrake.pm_.c:162 msgid "Print Queue Name:" msgstr "Skriverkø-navn:" #: ../printerdrake.pm_.c:162 msgid "Printer Server:" msgstr "Skrivertjener:" #: ../printerdrake.pm_.c:173 msgid "Yes, print ASCII test page" msgstr "Ja, skriv ASCII testside" #: ../printerdrake.pm_.c:174 msgid "Yes, print PostScript test page" msgstr "Ja, skriv PostScript testside" #: ../printerdrake.pm_.c:175 msgid "Yes, print both test pages" msgstr "Ja, skriv begge testsidene" #: ../printerdrake.pm_.c:183 msgid "Configure Printer" msgstr "Konfigurer skriver" #: ../printerdrake.pm_.c:184 msgid "What type of printer do you have?" msgstr "Hva slags type skriver har du?" #: ../printerdrake.pm_.c:206 msgid "Printer options" msgstr "Opsjoner for skriver" #: ../printerdrake.pm_.c:207 msgid "Paper Size" msgstr "Papirstørrelse" #: ../printerdrake.pm_.c:208 msgid "Eject page after job?" msgstr "Kjør ut side etter jobb?" #: ../printerdrake.pm_.c:211 msgid "Fix stair-stepping text?" msgstr "Fikse trappestegs-tekst?" #: ../printerdrake.pm_.c:214 msgid "Uniprint driver options" msgstr "Opsjoner uniprint-driver" #: ../printerdrake.pm_.c:215 msgid "Color depth options" msgstr "Opsjoner fargedybde" #: ../printerdrake.pm_.c:225 msgid "Do you want to test printing?" msgstr "Vil du teste utskrift?" #: ../printerdrake.pm_.c:254 #, c-format msgid "" "Is this correct? Printing status:\n" "%s" msgstr "" "Er dette riktig? Utskriftstatus:\n" "%s" #: ../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d" #: ../raid.pm_.c:106 msgid "Can't write file $file" msgstr "Kan ikke skrive fil $fil" #: ../raid.pm_.c:146 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Ikke nok partisjoner for RAID nivå %d\n" #: ../standalone/draksec_.c:30 msgid "Setting security level" msgstr "Setter sikkerhetsnivå" #: ../standalone/drakxconf_.c:21 msgid "Choose the tool you want to use" msgstr "Velg verktøyet du ønsker å bruke" #: ../standalone/drakxservices_.c:20 msgid "Choose which services should be automatically started at boot time" msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart" #: ../standalone/mousedrake_.c:30 msgid "no serial_usb found\n" msgstr "ingen serie_usb funnet\n"